Suchparameter:
- Suche in Publikations-Datensätzen nach: "R", "G", "mez", "V" und "zquez" (strikte Suche)
- Textsuche eingeschränkt auf Datenfelder: Gesamter Datensatz
- Suche eingeschränkt auf Publikationsarten: Alle
- Suche eingeschränkt auf Zeitraum: Alle Daten in der Datenbank
Mit Ihren Suchparametern wurden 27 passende Datensätze gefunden:
27 |
- Fakultät für Maschinenwesen und Betriebswissenschaften |
Zeitschriftenartikel:
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
M. Buttazzoni, C. Zenz, A. Otto, R. Gómez Vázquez, G. Liedl, J. Arias:
"A Numerical Investigation of Laser Beam Welding of Stainless Steel Sheets with a Gap";
Applied Sciences (eingeladen),
11
(2021),
6.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
G. Liedl, R. Gómez Vázquez, S. Murzin:
"Joining of aluminium alloy and steel by laser assisted reactive wetting";
Lasers in Manufacturing and Materials Processing,
5
(2017),
1;
S. 1
- 15.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
A. Otto, R. Gómez Vázquez, U. Hartel:
"Insight into the Process: Analysis of laser beam welding by means of multiphysical process simulations";
Laser Technik Journal (eingeladen),
AKL'18 International Laser Technology Congress
(2018),
15/2;
S. 40
- 45.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
S. Tatra, R. Gómez Vázquez, C. Stiglbrunner, A. Otto:
"Numerical Simulation of Laser Ablation with Short and Ultra-short Pulses for Metals and Semiconductors";
Physics Procedia,
83
(2016),
S. 1339
- 1346.
Zusätzliche Informationen
Vorträge und Posterpräsentationen (mit Tagungsband-Eintrag):
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
J. Bachmair, R. Gómez Vázquez, F. Bammer:
"A simple pulsed laser design for high harmonics generation";
Vortrag: XIX International Symposium on High-Power Laser Systems and Applications 2012,
Istanbul;
10.09.2012
- 14.09.2012; in: "SPIE Proceedings",
SPIE Proceedings,
8677 / 86771A (January 30, 2013)
(2013),
4 S.
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
P. Drobniak, A. Otto, R. Gómez Vázquez, R. Arias, J. Arias:
"Simulation of keyhole laser welding of stainless steel plates with a gap";
Vortrag: 11th CIRP Conference on Photonic Technologies [LANE 2020],
Online;
07.09.2020
- 10.09.2020; in: "Procedia CIRP 94",
M. Schmidt, F. Vollertsen, E. Govekar (Hrg.);
Elsevier,
(2020),
ISSN: 2212-8271;
S. 731
- 736.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
R. Gómez Vázquez, H. Koch, A. Otto:
"Multi-physical Simulation of Laser Welding";
Vortrag: LANE 2014,
Fürth (Deutschland);
08.09.2014
- 11.09.2014; in: "8th International Conference on Laser Assisted Net Shape Engineering LANE 2014",
Physics Procedia / Elsevier,
Volume 56
(2014),
ISSN: 1875-3892;
9 S.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
R. Gómez Vázquez, A. Otto, G. Liedl, R. Feichtenschlager:
"Simulation of Laser Welding of Dissimilar Metals";
Vortrag: Lasers in Manufacturing 2015,
München;
22.06.2015
- 25.06.2015; in: "Lasers in Manufacturing 2015",
(2015),
8 S.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
R. Gómez Vázquez, A. Otto, G. Liedl, R. Feichtenschlager, C. Stiglbrunner:
"Simulation of laser welding aluminum-to-steel";
Hauptvortrag: 11th International Seminar "Numerical Analysis of Weldability",
Graz - Castle Seggau;
27.09.2015
- 30.09.2015; in: "Mathematical Modelling of Weld Phenomena 11",
Verlag der Technischen Universität Graz,
11
(2016),
ISBN: 978-3-85125-490-7;
S. 99
- 108.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
R. Gómez Vázquez, A. Otto, J. Peternel:
"Recent Advances in the Multiphysical Simulation of Laser Assisted Manufacturing Processes";
Vortrag: LiM - Lasers in Manufacturing 2017,
München (eingeladen);
26.06.2017
- 29.06.2017; in: "Proceedings of the LiM 2017",
(2017),
Paper-Nr. 181,
12 S.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
H. Koch, R. Gómez Vázquez, A. Otto:
"A multiphysical simulation model for laser based manufacturing";
Vortrag: ECCOMAS 2012 (European Congress on Computational Methods in Applied Sciences and Engineering,
Wien;
10.09.2012
- 14.09.2012; in: "Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering",
TU Wien,
Wien
(2012),
ISBN: 978-3-9502481-9-7;
14 S.
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
H. Koch, R. Gómez Vázquez, A. Otto:
"Analysis of Distortion Effects on Weld Pool Dynamics in Laser Beam Welding";
Vortrag: IWOTE 2014,
Bremen (Deutschland);
09.04.2014
- 10.04.2014; in: "Proceedings of the IWOTE 2014: International Workshop on Thermal Forming and Welding Distortion",
Strahltechnik / BIAS Verlag,
Volume 54 / 2014 / Bremmen
(2014),
ISBN: 978-3-933762-48-1;
S. 165
- 172.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
H. Koch, R. Gómez Vázquez, A. Otto:
"Multiphysical Simulation of Laser Material Processing";
Vortrag: Lane 2012,
Erlangen, BRD (eingeladen);
12.11.2012
- 15.11.2012; in: "Physics Proceedia",
A. Otto (Hrg.);
Elsevier,
Volume 39
(2012),
Paper-Nr. 1875-3892,
9 S.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
M. Meunier, A. Otto, R. Gómez Vázquez, J. Arias, R. Fernández, G. Pallier, P. Jian, O. Pinel, G. Labroille:
"Freeform Beam Shaping with Multi-Plane Light Conversion for 1.07µm Ultra-High Throughput Laser-Based Material Macroprocessing";
Vortrag: International Congress on Applications of Lasers & Electro-Optics ICALEO 2019,
Orlando, USA;
07.10.2019
- 10.10.2019; in: "Proceedings of ICALEO 2019",
(2019),
Paper-Nr. # 0339_0501_000175,
8 S.
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
A. Otto, R. Gómez Vázquez:
"Fluid Dynamical Simulation of High Speed Micro Welding";
Vortrag: ICALEO 2017,
Atlanta, USA (eingeladen);
26.10.2017
- 27.10.2017; in: "2017 ICALEO Conference Proceedings (online)",
Journal of Laser Applications,
30/032411
(2018),
ISBN: 9781940168142;
Paper-Nr. M601,
9 S.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
A. Otto, R. Gómez Vázquez, U. Hartel, S. Mosbah:
"Numerical analysis of process dynamics in laser welding of Al and Cu";
Vortrag: 10th CIRP Conference on Photonic Technologies [LANE 2018],
Fürth, Germany;
03.09.2018
- 06.09.2018; in: "Procedia CIRP",
Procedia CIRP /,
74
(2018),
ISSN: 2212-8271;
S. 691
- 695.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
A. Otto, H. Koch, R. Gómez Vázquez et al.:
"Multiphysical Simulation of ns-Laser Ablation of Multi-material LED-structures";
Vortrag: LANE 2014,
Fürth (Deutschland);
08.09.2014
- 11.09.2014; in: "8th International Conference on Laser Assisted Net Shape Engineering LANE 2014",
Physics Procedia / Elsevier,
Volume 56
(2014),
ISSN: 1875-3892;
10 S.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
S. Tatra, A. Otto, R. Gómez Vázquez:
"Computational Study on the Effect of the Pulse Length on Laser Ablation Processes";
Vortrag: Lasers in Manufacturing 2015,
München;
22.06.2015
- 25.06.2015; in: "Lasers in Manufacturing 2015",
(2015),
8 S.
Zusätzliche Informationen
Vorträge und Posterpräsentationen (ohne Tagungsband-Eintrag):
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
R. Gómez Vázquez, A. Otto:
"Improving Laser Manufacturing Processes B y Means of Multiphysics Simulations";
Vortrag: International Symposium for Production Research,
Vienna (eingeladen);
13.09.2017
- 15.09.2018.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
R. Gómez Vázquez, A. Otto, G. Liedl, R. Feichtenschlager, C. Stiglbrunner, S. Tatra:
"Simulation of the Dissimilar Joining Process of Aluminum and Steel by Laser Assisted Wetting";
Vortrag: 12th International Conference on Numerical Methods in Industrial Forming Processes NUMIFORM 2016,
University of Technology of Troyes, Troyes (France);
04.07.2016
- 07.07.2016.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
Z. Lin, J. Kleinert, S. Tatra, R. Gómez Vázquez, R. Bielak, A. Otto:
"3D Numerical Modeling of Short Pulsed Laser Micromachining Applications";
Vortrag: ICALEO 2017,
Atlanta, USA;
26.10.2017
- 27.10.2017.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
A. Otto, R. Gómez Vázquez:
"Fluid dynamical defect mechanisms in laser beam welding";
Vortrag: LPM2019 - The 20th International Symposium on Laser Precision Microfabrication,
International Conference Center Hiroshima, Japan (eingeladen);
21.05.2019
- 24.05.2019.
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
A. Otto, R. Gómez Vázquez:
"Multiphysical Approach for the Simulation of Powder-based Laser Additive Manufacturing Processes";
Vortrag: OSA Laser Congress 2019,
Vienna (eingeladen);
29.09.2019
- 03.10.2019.
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
A. Otto, R. Gómez Vázquez et al.:
"Modelling and Simulation of Laser Material Processes - Potentials of Numerical Simulations for Understanding, Planning and Optimizing Laser Welding Processes";
Vortrag: LASER World of PHOTONICS 2019 - Application Panel "Lasers Materials Processing - Modelling and Simulation of Laser Material Processes",
Munich, Germany (eingeladen);
24.06.2019
- 27.06.2019.
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
A. Wohltan, M. Ionce, N. Neuwirth, P. Widauer, E. Pils, I. Schreiber, R. Gómez Vázquez, C. Stiglbrunner, A. Otto:
"Optimisation of Data Compression of OpenFOAM Simulations Utilising a Newly Developed Approach";
Vortrag: 12th International Conference on Numerical Methods in Industrial Forming Processes NUMIFORM 2016,
University of Technology of Troyes, Troyes (France);
04.07.2016
- 07.07.2016.
Zusätzliche Informationen
Diplom- und Master-Arbeiten (eigene und betreute):
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
R. Gómez Vázquez:
"Diode Laser based Particle Removal System";
Betreuer/in(nen): G. Liedl;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2009.
Wissenschaftliche Berichte:
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
G. Liedl, R. Bielak, F. Bammer, A. Kratky, W. Ebner, R. Gómez Vázquez:
"Abgasreinigung durch Laserstrahlung";
2009;
45 S.
|