TU Home
Diese Publikationsliste wurde automatisch aus den Publikationsdaten der TU Wien erstellt. Wenn Sie komplexere Suchabfragen vornehmen wollen, rufen Sie bitte die Seite "Publikationen der Fakultät" direkt auf, oder verwenden Sie die globale Suchfunktion der Publikationsdatenbank der Technischen Universität Wien!


Publikationsdatenbank Home  

Publikationsliste
der Technischen Universität Wien
Beiträge in Tagungsbänden

46560 Datensätze (1971 - 2022)

Die Publikationen der TU Wien sind erst ab dem Jahr 2002 vollzählig in der Publikationsdatenbank enthalten. Publikationen aus den Jahren vor 2002 können, müssen aber nicht in der Datenbank vorhanden sein.

Mit Ihren Auswahlparametern wurden 46560 Datensätze gefunden. Es werden nur die ersten 200 davon angezeigt. Engen Sie bitte Ihre Suche ein!


Beiträge in Tagungsbänden


K. Boguslavski, B. Kasmaei, M. Strickland:
"Long and short distance behavior of the imaginary part of the heavy-quark potential";
in: "A Virtual Tribute to Quark Confinement and the Hadron Spectrum (vConf21)", 258; EPJ Web of Conferences, 2022, S. 04008 - 04013.

K. Boguslavski, T. Lappi, S. Schlichting:
"Fermion and gluon spectral functions far from equilibrium";
in: "A Virtual Tribute to Quark Confinement and the Hadron Spectrum (vConf21)", 258; EPJ Web of Conferences, 2022, S. 05003 - 05010.

D. Bork, K. Anagnostou, M. Wimmer:
"Towards Interoperable Metamodeling Platforms: The Case of Bridging ADOxx and EMF";
in: "Advanced Information Systems Engineering - 34th International Conference, CAiSE 2022, Leuven, Belgium, June 6-10, 2022, Proceedings", herausgegeben von: Xavier Franch, Geert Poels, Frederik Gailly, Monique Snoeck; Springer, Switzerland, 2022, ISBN: 978-3-031-07472-1, S. 479 - 497.

F. Brandstätter, M. Autengruber, M. Lukacevic, J. Füssl:
"Numerical Simulation of Moisture-Induced Cracking in Wood exposed to Indoor Climate Conditions";
in: "Proceedings of the 8th European Concress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2022)", International Center for Numerical Methods in Engineering (CIMNE), 2022, Paper-Nr. 536, 1 S.

J. Brötzner, H. Biber, P. Szabo, N. Jäggi, C. Cupak, B. Cserveny, C. Voith, A. Galli, P. Wurz, F. Aumayr:
"An optimised Quartz Crystal Microbalance setup to investigate the sputtering behaviour of bulk targets";
in: "Proc. European Geosciences Union (EGU) General Assembly 2022", EGU22-5236; EGU, 2022, S. 1 - 2.

I. Chajda, H. Länger, J. Paseka:
"Constructions of Kleene lattices";
in: "Proc. 2022 IEEE 52nd Internat. Symp. on Multiple-Valued Logic (ISMVL)", IEEE Computer Society, 2022, ISBN: 978-1-6654-2395-3, S. 88 - 93.

G. De Carlo, P. Langer, D. Bork:
"Rethinking Model Representation - A Taxonomy of Advanced Information Visualization in Conceptual Modeling";
angenommen für: "Proceedings of the 41th International Conference on Conceptual Modeling", herausgegeben von: Springer; Springer LNCS, Cham, 2022.

D. Dhungana, A. Haselböck, C. Schmidbauer et al.:
"Enabling Resilient Production Through Adaptive Human-Machine Task Sharing";
in: "Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems", A. Andersen et al. (Hrg.); Springer Nature Switzerland AG, 2022, ISBN: 978-3-030-90699-3, S. 198 - 206.

R. Diaz, M. Aminbaghai, B. Pichler:
"Star-Shaped Falling Weight Deflectometer (FWD) Testing and Quantification of the Distribution of the Modulus of Subgrade Reaction";
in: "Procedings of the International Conference on Computational Modelling of Concrete and Concrete Structures (EURO-C 2022)", CRC Press, 2022, ISBN: 978-1-032-32724-2, S. 284 - 293.

P. Dohnalik, B. Pichler, L. Zelaya-Lainez, O. Lahayne, Ch. Hellmich:
"Experimental and Computational Micromechanics of Dental Cement Paste";
in: "Procedings of the International Conference on Computational Modelling of Concrete and Concrete Structures (EURO-C 2022)", CRC Press, 2022, ISBN: 978-1-032-32724-2, S. 96 - 101.

T. Eiter, T. Geibinger, N. N. Higuera Ruiz, N. Musliu, J. Oetsch, D. Stepanova:
"Large-Neighbourhood Search for Optimisation in Answer-Set Solving";
in: "36th AAAI Conference on Artificial Intelligence (AAAI-22)", AAAI Press, 2022, 10 S.

T. Eiter, J. Oetsch, N. N. Higuera Ruiz, M. Pritz:
"A Confidence-Based Interface for Neuro-Symbolic Visual Question Answering";
in: "CLeaR Workshop AAAI 2022", AAAI Press, 2022.

A.L. Gratzer, A. Schirrer, E. Thonhofer, F. Pasic, S. Jakubek, C. Mecklenbräuker:
"Short-Term Collision Estmation by Stochastic Predictions in Multi-Agent Intersection Traffic";
angenommen für: "Proc. of the International Conference on Electrical, Computer and Energy Technologies (ICECET 2022)", herausgegeben von: IEEE; IEEE Xplore, Prague, 2022, S. 1 - 6.

P. Indri, A. Bartoli, E. Medvet, L. Nenzi:
"One-Shot Learning of Ensembles of Temporal Logic Formulas for Anomaly Detection in Cyber-Physical Systems";
in: "EuroGP 2022: Proceedings of the 25th European Conference on Genetic Programming", 20-22 , April; Springer-Verlag, Madrid, Spain, 2022, S. 32 - 47.

A. Ipp, D. Mueller, M. Favoni, D. Schuh:
"Preserving gauge invariance in neural networks";
in: "A Virtual Tribute to Quark Confinement and the Hadron Spectrum (vConf21)", 258; EPJ Web of Conferences, 2022, ISSN: 2100-014x, Paper-Nr. 09004, 8 S.

A. Ipp, D. Mueller, D. Schuh:
"On transverse momentum broadening in real-time lattice simulations of the glasma and in the weak-field limit";
in: "A Virtual Tribute to Quark Confinement and the Hadron Spectrum (vConf21)", 258; EPJ Web of Conferences, 2022, ISSN: 2100-014x, Paper-Nr. 05002, 8 S.

N. Jäggi, H. Biber, P. Szabo, A. Vorburger, A. Mutzke, F. Aumayr, P. Wurz, A. Galli:
"An update on modeled ion sputter yields of planetary bodies in agreement with recent experimental data";
in: "Proc. European Geosciences Union (EGU) General Assembly 2022", EGU22-5188; EGU General Assembly, 2022, S. 1 - 2.

J. Kalliauer, H.A. Mang:
"Are the Terms Stiffening/Softening Structures Mechanically Unambigous?";
in: "Book of Abstracts of the 8th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS2022)", Scipedia, S.L., 2022, (eingeladen).

A. Mohan, D. Ceglarek, M. Auinger:
"Effect of beam oscillation on the fluid flow during laser welding";
in: "Material TECH 2022 (Second International Conference on Materials and Technologies)", 59; herausgegeben von: Elsevier; Materials Today: Proceedings, Elsevier, 2022, ISSN: 2214-7853, S. 1846 - 1851.

N. Mühlich, J. Gerger, B. Seifert, F. Aumayr:
"Performance prediction of a new FEEP thruster design verified with direct and indirect thrust measurements";
in: "Proceedings of the 8. Space Propulsion Conference (SP2022)", 8. Space Propulsion Conference (SP2022), Estoril/Portugal, 2022, S. 1 - 6.

A. Naseredini, S. Gast, M. Schwarzl, Pedro Sousa Bernardo, A. Smajic, C. Canella, D. Gruss:
"Systematic Analysis of Programming Languages and Their Execution Environments for Spectre Attacks";
in: "Proceedings of the 8th International Conference on Information Systems Security and Privacy", SciTePress, 2022, ISBN: 978-989-758-553-1, S. 48 - 59.

E. A. Neufeld:
"Reinforcement Learning Guided by Provable Normative Compliance";
in: "Proceedings of the 14th International Conference on Agents and Artificial Intelligence", INSTICC Press, 2022, S. 444 - 453.

A. Niggas, J. Schwestka, D. Weichselbaum, R. Heller, F. Aumayr, R. Wilhelm:
"Coincidence technique to study ion- induced electron emission from atomically thin materials";
in: "Proc. of SPIE 12131 Nanophotonics IX", 121310H; Proc. of SPIE, 2022, S. 1 - 8.

F. Pasic, D. Schützenhöfer, E. Jirousek, R. Langwieser, H. Groll, S. Pratschner, S. Caban, S. Schwarz, M. Rupp:
"Comparison of Sub 6 GHz and mmWave Wireless Channel Measurements at High Speeds";
angenommen für: "Proceedings of the 16th European Conference on Antennas and Propagation (EuCAP 2022)", IEEE, 2022, ISBN: 978-88-31299-04-6, S. 1 - 5.

G. Poels, H. Proper, D. Bork:
"DT4GITM - A Vision for a Framework for Digital Twin enabled IT Governance";
in: "55th Hawaii International Conference on System Sciences (HICSS´22)", herausgegeben von: HICSS ScholarSpace and AIS eLibrary; AIS, 2022, ISBN: 978-0-9981331-5-7, S. 6626 - 6635.

U. Pont, P. Schober, M. Wölzl, M. Schuss, J. Haberl, K. Hauer:
"Recent Progress in the VAMOS-Project: Vacuum glass as Alternative for Window Retrofit";
in: "Conference Proceedings - 2nd International Sustainable Energy Conference 2022", herausgegeben von: Aee Intec; ISEC 2nd International Sustainable Energy Conference 2022, Eigenverlag mit wissenschaftlichem Lektorat, 2022, 2 S.

P. Reingruber, R. Langwieser, T. Berisha, C. Mecklenbräuker:
"Measured Radiation Behaviour of a UAV-attached LTE Antenna";
angenommen für: "16th European Conference on Antennas and Propagation (EuCAP)", IEEE (Hrg.); 16th European Conference on Antennas and Propagation (EuCAP), Madrid, 2022, S. 1 - 5.

R. Reismüller, M. Lukacevic, T. Kiefer, J. Füssl:
"A Finite-Element-Based Unit Cell Approach for Simulating Vertically Perforated Clay Block Masonry";
in: "Proceedings of the 8th European Concress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2022)", International Center for Numerical Methods in Engineering (CIMNE), 2022, Paper-Nr. 846, 1 S.

T. Rusch, M. Spitzhirn, S. Sen, T. Komenda:
"Quantifying the Economic and Ergonomic Potential of Simulated HRC Systems in the Focus of Demographic Change and Skilled Labor Shortage";
in: "Proceedings of the 2021 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM)", herausgegeben von: IEEE; IEEE, 2022, (eingeladen), ISBN: 978-1-6654-3771-4.

M. Schedl, S. Brandl, O. Lesota, E. Parada-Cabaleiro, D. Penz, N. Rekabsaz:
"LFM-2b: A Dataset of Enriched Music Listening Events for Recommender Systems Research and Fairness Analysis";
in: "CHIIR '22: ACM SIGIR Conference on Human Information Interaction and Retrieval", ACM, 2022, S. 337 - 341.

St. Scheiner:
"Computation of Mechanical Stimuli Potentially Governing the Mechanobiology of Bone Computed by Means of Micromechanics-Based Models";
in: "Online Summer School "Multiscale Modeling and Bone Pathologies" (SGABU)", TU Wien, Institute for Mechanics of Materials and Structures, 2022, 2 S.

St. Scheiner:
"Contiuum Micromechanics: From Fundamentals to Stiffness Homogenization (and Beyond)";
in: "Online Summer School "Multiscale Modeling and Bone Pathologies" (SGABU)", TU Wien, Institute for Mechanics of Materials and Structures, 2022, 1 S.

S. Schmid, R. Diaz, M. Aminbaghai, B. Pichler:
"Curling Stresses and Thermal Eigenstresses in a Concrete Pavement Slab";
in: "Procedings of the International Conference on Computational Modelling of Concrete and Concrete Structures (EURO-C 2022)", CRC Press, 2022, ISBN: 978-1-032-32724-2, S. 564 - 571.

B. Sommer, U. Pont, P. Bauer, F. Riola Parada, I. Prieler, K. Meixner:
"Recent Progress in the SPIDER Progress";
in: "Conference Proceedings - 2nd International Sustainable Energy Conference 2022", AEE INTEC (Hrg.); herausgegeben von: Aee Intec; ISEC 2nd International Sustainable Energy Conference 2022, Eigenverlag mit wissenschaftlichem Lektorat, Graz, 2022, 2 S.

B. Sommer, U. Pont, G. Moncayo, M. Schuss, M. Sommer-Nawara:
"A review on the EVA project";
in: "Conference Proceedings - 2nd International Sustainable Energy Conference 2022", AEE INTEC (Hrg.); herausgegeben von: Aee Intec; ISEC 2nd International Sustainable Energy Conference 2022, Eigenverlag mit wissenschaftlichem Lektorat, 2022, 2 S.

M. Sorgner, R. Diaz, B. Pichler:
"Engineering Mechanics Analysis of a Moderate Fire Inside a Segment of a Subway Station";
in: "Procedings of the International Conference on Computational Modelling of Concrete and Concrete Structures (EURO-C 2022)", CRC Press, 2022, ISBN: 978-1-032-32724-2, S. 555 - 563.

F. Weber, L. Winkler:
"Digitaler Wandel von DSV-Baustellen in Planung und Ausführung - Ein Weg zur Risikominimierung";
in: "Unwägbarkeit in Planung & Ausführung von geotechnischen Maßnahmen", 13; herausgegeben von: ÖIAV; Berichte Österreichische Geotechniktagung, Wien, 2022, ISBN: 978-3-902593-09-2, S. 263 - 274.

L. Zelaya-Lainez:
"Variances and Invariances in Composition and Microstructure across Femoral Tissues from Different Vertebrates";
in: "Online Summer School "Multiscale Modeling and Bone Pathologies" (SGABU)", TU Wien, Institute for Mechanics of Materials and Structures, 2022, 1 S.

L. Abendroth, J. Anderson, B. Bell, S. Colwill, P. Fattinger, U. Hartig, J. Hou, S. Palleroni, N. Pawlicki, C. Priest:
"Expanding the Common Good";
in: "Design as Common Good / Framing Design through Pluralism and Social Values", M. Botta, S. Junginger (Hrg.); herausgegeben von: University of Applied Sciences and Arts of Southern Switzerland, Lucerne University of Applied Sciences and Arts, swissdesignnetwork; SUPSI, HSLU, swissdesignnetwork, swissdesignnetwork, Luzern, 2021, ISBN: 978-88-7595-108-5, S. 234 - 247.

A. Amiri, U. Zdun, A. van Hoorn, S. Dustdar:
"Automatic Adaptation of Reliability and Performance Trade-Offs in Service- and Cloud-Based Dynamic Routing Architectures";
in: "Proceedings of the 21st IEEE International Conference on Software Quality, Reliability and Security (QRS 2021)", IEEE, 2021, ISBN: 978-1-6654-5814-6, S. 434 - 445.

E. Andreeva, A. Bhati, D. Vizár:
"Nonce-Misuse Security of the SAEF Authenticated Encryption Mode";
in: "27th International Conference, Halifax, NS, Canada (Virtual Event), October 21-23, 2020", Lecture Notes in Computer Science, vol 12804; herausgegeben von: Springer; Springer LNCS, Cham, 2021, ISBN: 978-3-030-81651-3, S. 512 - 534.

E. Andreeva, R. Bhattacharyya, A. Roy:
"Compactness of Hashing Modes and Efficiency Beyond Merkle Tree";
in: "Advances in Cryptology - EUROCRYPT 2021", LNCS, volume 12697; herausgegeben von: Springer; Springer, Cham, 2021, ISBN: 978-3-030-77885-9, S. 92 - 123.

E. Andreeva, A. Deprez, J. Bermudo Mera, A. Karmakar, A. Purnal:
"Optimized Software Implementations for the Lightweight Encryption Scheme ForkAE";
in: "CARDIS: International Conference on Smart Card Research and Advanced Applications", LNCS, volume 12609; herausgegeben von: Springer; Springer, Cham, 2021, ISBN: 978-3-030-68486-0, S. 68 - 83.

E. Andreeva, A. Roy, J. Sauer:
"Interpolation Cryptanalysis of Unbalanced Feistel Networks with Low Degree Round Functions";
in: "27th International Conference, Halifax, NS, Canada (Virtual Event), October 21-23, 2020", LNCS, volume 12804; herausgegeben von: Springer; Springer LNCS, Cham, 2021, ISBN: 978-3-030-81651-3, S. 273 - 300.

A. Arleo, S. Miksch, D. Archambault:
"A Multilevel Approach for Event-Based Dynamic Graph Drawing";
in: "EuroVis 2021 - Short Papers", M. Agus, C. Garth, A. Kerren (Hrg.); Eurographics Association, 2021, ISBN: 978-3-03868-143-4, 5 S.

P. Aryan, F. Ekaputra, R. Sabou, D. Hauer, R. Mosshammer, A. Einfalt, T. Miksa, A. Rauber:
"Explainable Cyber-Physical Energy Systems based on Knowledge Graph";
in: "2021 9th Workshop on Modeling and Simulation of Cyber-Physical Energy Systems", ACM Digital Library, 2021, S. 1 - 6.

G. Balduzzi, S. Morganti, J. Füssl, A. Reali, F. Auricchio:
"Anisotropic Beams with Variable Fiber Directions: Analystical Modeling and Isogeometric Collocation";
in: "Book of Abstracts of the 14th World Congress in Computational Mechanics and ECCOMAS Congress (virtual)", International Center for Numerical Methods in Engineering (CIMNE), 2021, 1 S.

G. Balduzzi, L. Zelaya-Lainez, G. Hochreiner, Ch. Hellmich:
"Dog-Bone Specimens May not Provide Direct Access to Clear Wood Tensile Strength Parallel to Grain: Analyticial and Numerical Evidences";
in: "Book of Abstracts of the 37th Danubia Adria Symposium on Advances in Experimental Mechanics", Johannes Kepler University, 2021, ISBN: 978-3-9504997-0-4, S. 133 - 134.

B. Bauer, G. Fuchsbauer, A. Plouviez:
"The One-More Discrete Logarithm Assumption in the Generic Group Model";
in: "Advances in Cryptology - ASIACRYPT 2021", Lecture Notes in Computer Science, vol 13093; Springer, Springer Link, 2021, ISBN: 978-3-030-92067-8, S. 587 - 617.

B. Bauer, G. Fuchsbauer, C. Qian:
"Transferable E-cash: A Cleaner Model and the First Practical Instantiation";
in: "Public-Key Cryptography - PKC 2021", 2; Springer, 2021, S. 559 - 590.

J. Belo, A. Feit, Anna Feit, T. Feuchtner, Tiare Feuchtner, K. Grønbæk:
"XRgonomics: Facilitating the Creation of Ergonomic 3D Interfaces";
in: "CHI '21: Proceedings of the 2021 CHI Conference on Human Factors in Computing Systems", herausgegeben von: Association for Computing Machinery (ACM); ACM Digital Library, New York, NY, United States, 2021, ISBN: 9781450380966, S. 1 - 11.

A. Bender, K. Heckenblaickner:
"Modell zur Projektkosten- und Risikoabschätzung im Infrastrukturbau mit Fokus Tunnelbau";
in: "Festschrift anläßlich des 50-jährigen Bestehens der Forschungsbereiche für Baubetrieb und Bauwirtschaft", herausgegeben von: Institut für Interdisziplinäres Bauprozessmanagement; TU-MV Media Verlag GmbH, 1040 Wien, 2021, ISBN: 978-3-903311-26-8, S. 121 - 134.

I. Bider, D. Bork, E. Perjons:
"FEM toolkit - A Tool for Business Process Architects";
in: "Proceedings of the Demonstration & Resources Track, Best BPM Dissertation Award, and Doctoral Consortium at BPM 2021 co-located with the 19th International Conference on Business Process Management, BPM 2021, Rome, Italy, September 6-10, 2021", CEUR-WS.org, 2021, S. 151 - 155.

I. Bider, E. Perjons, D. Bork:
"Context is King: an Enterprise Model that Connects the Internal Structure with the Business Environment";
in: "2021 IEEE 25th International Enterprise Distributed Object Computing Workshop (EDOCW)", IEEE Xplore Digital Library, 2021, ISBN: 978-1-6654-4488-0, S. 333 - 336.

I. Bider, E. Perjons, D. Bork:
"Towards On-The-Fly Creation of Modeling Language Jargons";
in: "ICTERI´21: 17th International Conference on ICT in Education, Research, and Industrial Applications", CEUR-WS.org, 2021, S. 142 - 157.

M. V. Biezma Moraleda, P. Linhardt, I. DeCoito, Y Hedberg:
"Concept-Based Corrosion Education - Can Experiential Learning And Case Stories Help?";
in: "EDULEARN21 Proceedings", herausgegeben von: IATED; IATED Academy, Plaza Legion Española, 11 46010 Valencia SPAIN, 2021, (eingeladen), ISBN: 978-84-09-31267-2, S. 2662 - 2671.

E. Binder, W. Derkowski, B. Pichler, T. Bader:
"Time-Dependent Behavior of Hybrid Structures: An Interdisciplinary Modeling Approach for Cocrete and Timber";
in: "Programme & Book of Abstracts of the International Symposium on Interdisciplinary Research in Civil Engineering Sciences (IS-IRCES)", Technische Universität Wien, 2021, S. 25.

E. Binder, M. Königsberger, Ch. Hellmich, B. Pichler:
"Temperature-Dependent Creep of Mature Cement Paste";
in: "Programme & Book of Abstracts of the ERICA CASH II Final Conference", TU Wien, Institute for Mechanics of Materials and Structures, 2021, S. 109 - 110.

J. Bogensperger, S. Schlarb, A. Hanbury, G. Recski:
"DreamDrug - A crowdsourced NER dataset for detecting drugs in darknet markets";
in: "Proceedings of the Seventh Workshop on Noisy User-generated Text (W-NUT 2021)", The Association for Computational Linguistics, 2021, S. 137 - 157.

D. Bork, A. Fend, D. Scheffknecht, G. Kappel, M. Wimmer:
"From In-Person to Distance Learning: Teaching Model-Driven Software Engineering in Remote Settings";
in: "2021 ACM/IEEE International Conference on Model Driven Engineering Languages and Systems Companion (MODELS-C) - Educators Symposium Track", herausgegeben von: ACM/IEEE; IEEE Xplore Digital Library, USA, 2021, ISBN: 978-1-6654-2484-4, S. 702 - 711.

A. Brathukin, A. Treytl, S. Howind, A. Estaji, T. Sauter:
"Integrating uncertainty of available energy in manufacturing planning";
in: "2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)", 26; herausgegeben von: ETFA; IEEE, Sweden, 2021, ISBN: 978-1-7281-2989-1, S. 1 - 4.

W. Brugger:
"Prüfung von Sachgründungen (insb Unternehmenseinbringungen) durch das Firmenbuchgericht";
in: "Gesellschafts- und Unternehmensrecht 2021", herausgegeben von: Manz; Manz Rechtsakademie, Wien, 2021, S. 1 - 24.

T. Buchner, T. Kiefer, M. Königsberger, A. Jäger, J. Füssl:
"A Multiscale Model for Fired Clay Brick Masonry: Upscaling of Experimentally Identified Microstructural Features to Macroscopic Elastic Stiffness and Thermal Conductivity";
in: "Programme & Book of Abstracts of the International Symposium on Interdisciplinary Research in Civil Engineering Sciences (IS-IRCES)", Technische Universität Wien, 2021, S. 19.

T. Buchner, T. Kiefer, L. Zelaya-Lainez, W. Gaggl, J. Füssl:
"A Multitechnique Characterization and Quantification of the Microstructures of Bricks Made of Different Clayey Raw Materials";
in: "Book of Abstracts of the 37th Danubia Adria Symposium on Advances in Experimental Mechanics", Johannes Kepler University, 2021, ISBN: 978-3-9504997-0-4, S. 45 - 46.

J. Bush, N. TaheriNejad, E. Willegger, M. Wojcik, M. Kessler, J. Blatnik, I. Daktylidis, J. Ferdigg, D. Haslauer:
"Nyuzi: An Open Source GPGPU for Graphics, Enhanced with OpenCL Compiler for Calculations";
in: "IEEE Design, Automation & Test in Europe", IEEE, 2021, 1 S.

J. Cardoso, N. Goncalves, M. Wimmer:
"Cost Volume Refinement for Depth Prediction";
in: "Proceedings of the 25th International Conference on Pattern Recognition", IEEE Computer Society Press, 2021, ISBN: 978-1-7281-8809-6, S. 354 - 361.

I. Chajda, H. Länger:
"Implication in weakly and dually weakly orthomodular lattices";
in: "Algebraic Perspectives on Substructural Logics", D. Fazio, A. Ledda, F. Paoli (Hrg.); Springer Nature Switzerland AG, 2021, ISBN: 978-3-030-52162-2, S. 41 - 56.

I. Chajda, H. Länger, J. Paseka:
"Residuated operators and Dedekind-MacNeille completion";
in: "Algebraic Perspectives on Substructural Logics", D. Fazio, A. Ledda, F. Paoli (Hrg.); Springer Nature Switzerland AG, 2021, ISBN: 978-3-030-52162-2, S. 57 - 72.

J. Cho, W. Rossman, S.-D. Yang:
"Discrete minimal nets with symmetries";
in: "Minimal surfaces: integrable systems and visualisation", Springer International Publishing Switzerland, Cham, 2021, ISBN: 978-3-030-68540-9, S. 35 - 50.

A. Ciabattoni, B. Lellmann:
"Sequent Rules for Reasoning and Conflict Resolution in Conditional Norms";
in: "Proceedings of DEON2020/21", College Publications, 2021, ISBN: 978-1-84890-352-4, S. 94 - 113.

R. Csaky, G. Recski:
"The Gutenberg Dialogue Dataset";
in: "Proceedings of the 16th Conference of the European Chapter of the Association for Computational Linguistics: Main Volume", herausgegeben von: Association for Computational Linguistics; The Association for Computational Linguistics, 2021, ISBN: 978-1-954085-02-2, S. 138 - 159.

B. Csima, D. Rossegger, D. Yu:
"Positive Enumerable Functors";
in: "Conference on Computability in Europe, Proceedings", Springer, 2021, S. 385 - 394.

M. De Vries, D. Bork:
"Identifying Scenarios to Guide Transformations from DEMO to BPMN";
in: "Advances in Enterprise Engineering XIV", D. Aveiro, D. Guizzardi, R. Pergl, H. Proper (Hrg.); Springer Nature Switzerland AG 2021, Switzerland, 2021, ISBN: 978-3-030-74195-2, S. 92 - 110.

R. Diaz, M. Aminbaghai, L. Eberhardsteiner, R. Blab, M. Buchta, B. Pichler:
"Star-Shaped Testing with a Falling Weight Deflectometer";
in: "Book of Abstracts of the 37th Danubia Adria Symposium on Advances in Experimental Mechanics", Johannes Kepler University, 2021, ISBN: 978-3-9504997-0-4, S. 112 - 113.

M. Döring-Williams, L. Albrecht:
"Magnifice construxerat: Die Innenausstattung der Maxentiusbasilika in Rom";
in: "Stone and Splendor: Interior Decorations in Late-antique Palaces and Villas", Harrassowitz Verlag, 2021, ISBN: 978-3-447-11662-6, S. 155 - 176.

L. Dörrzapf, M. Berger et al.:
"Partizipative Prozesse bei taktischen Interventionen - Einblicke aus Villach";
in: "REAL CORP 2021 Proceedings/Tagungsband, 7-10 September 2021", M. Schrenk et al. (Hrg.); herausgegeben von: Real Corp; Real Corp 2021, Wien, 2021, ISBN: 978-3-9504945-0-1, S. 559 - 566.

P. Dohnalik, O. Lahayne, B. Pichler, Ch. Hellmich:
"Grid Nanoindentation and Ultrasonic Characterization of Dental Cement Paste";
in: "Technical Program and Abstracts of EMI 2021 / PMC 2021", American Society of Civil Engineers (ASCE), 2021.

P. Dohnalik, O. Lahayne, L. Zelaya-Lainez, B. Pichler, Ch. Hellmich:
"Grid Nanoindentation of Mature Dental Cement Paste";
in: "Programme & Book of Abstracts of the ERICA CASH II Final Conference", TU Wien, Institute for Mechanics of Materials and Structures, 2021, S. 105 - 106.

P. Dohnalik, B. Pichler, L. Zelaya-Lainez, O. Lahayne, G. Richard, Ch. Hellmich:
"Characterization of Dental Cement Paste: Grid Nanoindentastion and Ultrasound";
in: "Book of Abstracts of the 37th Danubia Adria Symposium on Advances in Experimental Mechanics", Johannes Kepler University, 2021, ISBN: 978-3-9504997-0-4, S. 167 - 168.

L. Eibensteiner, M. Ilcik, M. Wimmer:
"Temporal-Scope Grammars for Polyphonic Music Generation";
in: "Proceedings of the 9th ACM SIGPLAN International Workshop on Functional Art, Music, Modelling, and Design (FARM ´21)", ACM Press, News York, 2021, S. 23 - 34.

T. Ertl, C. Müller, K. Aal, V. Wulf, F. Tachtler, L. Scheepmaker, G. Fitzpatrick, N. Smith, D. Schuler:
"Ethical Future Environments: Smart Thinking about Smart Cities means engaging with its Most Vulnerable";
in: "C&T '21: Proceedings of the 10th International Conference on Communities & Technologies - Wicked Problems in the Age of Tech", ACM Digital Library, 2021, S. 340 - 345.

S. Fenz, J. Bergmayr, N. Plattner, S. Chávez-Feria, M. Poveda-Villalón, G. Giannakis:
"Integration of building material databases for IFC-based building performance analysis";
in: "Proceedings of the 38th International Symposium on Automation and Robotics in Construction (ISARC)", herausgegeben von: International Association for Automation and Robotics in Construction (IAARC); International Association for Automation and Robotics in Construction (IAARC), 2021, S. 182 - 189.

V. Filipov, A. Arleo, S. Miksch:
"Exploratory User Study on Graph Temporal Encodings";
in: "IEEE 14th Pacific Visualization Symposium (PacificVis)", herausgegeben von: IEEE; IEEE 14th Pacific Visualization Symposium (PacificVis), Tianjin, China, 2021, S. 126 - 130.

N. Filipovic, Ch. Hellmich, J. Isakovic:
"Brain-Heart Electromechanical Modeling";
in: "21st IEEE International Conference on BioInformatics and BioEngineering Proceedings", University of Kragujevac in Kragujevac, Serbia, 2021.

C. Fischer, S. Schlund:
"Ansatz zur Integration biomechanischer Grenzwerte in Prozesssimulationen kollaborativer Mensch-Roboter-Arbeitssysteme";
in: "GfA-Frühjahrskongress 2021", herausgegeben von: GfA, Dortmund; Gesellschaft für Arbeitswissenschaft, Dortmund, 2021.

R. Foidl, L. Brugger, T. Miksa:
"Automating Evaluation of Machine-Actionable Data Management Plans with Semantic Web Technologies";
in: "DaMaLOS - 2nd Workshop on Data and Research Objects Management for Linked Open Science : Co-located at the International Semantic Web Conference ISWC 2021", PUBLISSO, 2021, 2021, 13 S.

A. Gall, E. Gröller, Ch. Heinzl:
"ImNDT: Immersive Workspace for the Analysis of Multidimensional Material Data From Non-Destructive Testing";
in: "Proceedings of the 27th ACM Symposium on Virtual Reality Software and Technology", herausgegeben von: ACM Digital Library; ACM Press, 2021, S. 1 - 11.

B. Gallauner, S. Thalhammer, M. Vincze:
"Enabling Classification of Heavily-occluded Objects through Class-agnostic Image Manipulation";
in: "OAGM Workshop 2021 Computer Vision and Pattern Analysis Across Domains", Verlag der Technischen Universität Graz, 2021, 5 S.

K. A. Gemes, G. Recski:
"TUW-Inf at GermEval2021: Rule-based and Hybrid Methods for Detecting Toxic, Engaging, and Fact-Claiming Comments";
in: "Proceedings of the GermEval 2021 Workshop on the Identification of Toxic, Engaging, and Fact-Claiming Comments : 17th Conference on Natural Language Processing KONVENS 2021", netlibrary, 2021, S. 69 - 75.

D. Georgakopoulos, S. Dustdar, T. Gu:
"Message from the iThings 2021 General Chairs";
in: "Proceedings of the IEEE Congress on Cybermatics 2021: iThings 2021, GreenCom 2021, CPSCom 2021, SmartData 2021", J. Zheng, X. Liu, T. Luan, P. Jayaraman, H. Dai, K. Mitra, K. Qin, R. Ranjan, S. Wen (Hrg.); IEEE, 2021, ISBN: 978-1-6654-1763-1, S. xiii.

G. Girol, B. Farinier, S. Bardin:
"Not All Bugs Are Created Equal, But Robust Reachability Can Tell The Difference";
in: "Computer Aided Verification - 33rd International Conference", vol 12759; Springer LNCS, 2021, ISBN: 978-3-030-81684-1, S. 669 - 693.

P. Glaser, D. Bork:
"The BIGER Tool - Hybrid Textual and Graphical Modeling of Entity Relationships in VS Code";
in: "2021 IEEE 25th International Enterprise Distributed Object Computing Workshop (EDOCW)", IEEE Xplore Digital Library, 2021, ISBN: 978-1-6654-4488-0, S. 337 - 340.

A. Glinserer, M. Lechner, A. Wendt:
"Automated Pruning of Neural Networks for Mobile Applications";
in: "2021 IEEE 19th International Conference on Industrial Informatics (INDIN)", herausgegeben von: IEEE; IEEE, 2021, ISBN: 978-1-7281-4395-8.

Z. Goekdeniz, M. Lederer, G. Khatibi, J. Nicolics:
"Temperature Dependent Relaxation Behavior of Pressureless and Pressure Assisted Sintered Silver";
in: "44th Int. Spring Seminar on Electronics Technology (ISSE)", 1; herausgegeben von: ieee; IEEE Conference Publications, 2021, ISSN: 2161-2536, S. 1 - 6.

N. Grossmann, J. Bernard, M. Sedlmaier, M. Waldner:
"Does the Layout Really Matter? A Study on Visual Model Accuracy Estimation";
in: "IEEE Visualization Conference (VIS)", IEEE Computer Society Press, 2021, S. 61 - 65.

B. Haas, A. Wendt, A. Jantsch, M. Wess:
"Neural Network Compression Through Shunt Connections and Knowledge Distillation for Semantic Segmentation Problems";
in: "Artificial Intelligence Applications and Innovations, 17th IFIP WG 12.5 International Conference", herausgegeben von: Springer Nature; Springer Nature Switzerland AG, Greece, 2021, ISBN: 978-3-030-79149-0, S. 349 - 361.

J. Haider, M. Pohl, R. Beecham, J. Dykes:
"Understanding Map Comparison: Strategies for Detecting Difference in Map Line-up Tasks";
in: "Human-Computer Interaction -- INTERACT 2021", 12934; herausgegeben von: IFIP; Springer, Cham, Basel, 2021, ISBN: 978-3-030-85613-7, S. 558 - 578.

E. Hainzl, O. Aichholzer, D. Eppstein:
"Geometric Dominating Sets - A Minimum Version of the No-Three-In-Line Problem.";
in: "Proceedings of the 37th European Workshop on Computational Geometry", Proceedings of the 37th European Workshop on Computational Geometry, St. Petersburg, Russia, 2021, S. 122 - 128.

R. Haubner, S. Strobl, P. Trebsche:
"Analytical investigations on plate slags from the late Urnfield Period copper mining settlement at Prigglitz-Gasteil (Lower Austria)";
in: "Monographies Instrumentum 73 - Proceedings of the 5th International Conference "Archaeometallurgy in Europe"", B. Török, A. Giumlia-Mair (Hrg.); Editions Mergoil, Drémil-Lafage, 2021, (eingeladen), ISBN: 978-2-35518-121-4, S. 207 - 218.

G. Hauger, T. Fian et al.:
"Capturing Customer-Centred Functions of Local eCommerce Platforms";
in: "REAL CORP 2021 Proceedings/Tagungsband, 26th International Conference on Urban Development, Regional Planning and Information Society.", M. Schrenk et al. (Hrg.); herausgegeben von: Real Corp; Real Corp 2021, Wien, 2021, ISSN: 2521-3938, S. 163 - 171.

U. Herbig:
"Digital teaching: Interdisciplinary - International - Interactive - Visual";
in: "Tagungsband zum 20. E-Learning Tag der FH JOANNEUM 2021", J. Pauschenwein, D. Wallner, L. Michelitsch (Hrg.); herausgegeben von: ZML - Innovative Lernszenarien (FH JOANNEUM); FH Joanneum, Graz, 2021, (eingeladen), ISBN: 978-3-903318-04-5, S. 9 - 19.

F. Himmelstoss, H. Votzi:
"A Floating Double Buck-Boost Converter as Driver for a Permanent Exited DC Machine";
in: "2021 International Conference on Electrical Drives & Power Electronics (EDPE)", herausgegeben von: IEEE Xplore; IEEE Xplore, USA, 2021, ISBN: 978-1-6654-3235-1, S. 72 - 77.

R. Höller, V. Smejkal, F. Libisch, Ch. Hellmich:
"Energy Landscapes of Graphene under General Deformations: DFT-to-Hyperelasticity Upscaling";
in: "Technical Program and Abstracts of EMI 2021 / PMC 2021", American Society of Civil Engineers (ASCE), 2021.

R. Höller, V. Smejkal, F. Libisch, Ch. Hellmich:
"Upscaling From Electrons to Membranes: Quantification of the Anisotropic Elasticity of Graphene";
in: "Programme & Book of Abstracts of the International Symposium on Interdisciplinary Research in Civil Engineering Sciences (IS-IRCES)", Technische Universität Wien, 2021, S. 11.

M. Hofer, D. Löschenbrand, J. Blumenstein, H. Groll, S. Zelenbaba, B. Rainer, L. Bernadó, J. Vychodil, T. Mikulasek, E. Zöchmann, S. Sangodoyin, H. Hammoud, B. Schrenk, R. Langwieser, S. Pratschner, A. Prokes, A. F. Molisch, C. Mecklenbräuker, T. Zemen:
"Wireless Vehicular Multiband Measurements in Centimeterwave and Millimeterwave Bands";
in: "International Symposium on Personal, Indoor, Mobile Radio Communications (IEEE PIMRC 2021)", IEEE, 2021, 6 S.

N. Hohenecker, G. Hauger et al.:
"alBOX: White Label Parcel Lockers as Sustainable Solution for Last Mile Delivery";
in: "REAL CORP 2021 Proceedings/Tagungsband, 26th International Conference on Urban Development, Regional Planning and Information Society.", M. Schrenk et al. (Hrg.); herausgegeben von: Real Corp; Real Corp 2021, Wien, 2021, ISSN: 2521-3938, S. 41 - 51.

E. Holub, P. Wobrauschek, P. Kregsamer, C. Streli:
"Spectral correction for transmission x-ray tubes for use in the quantification software ATI-QUANT";
in: "Advances in X-ray Analysis", JCPDS-International Centre for Diffraction Data, 2021, ISSN: 1097-0002, S. 1 - 28.

H. Isakovic, S. Dangl, Z. Tucakovic, R. Grosu:
"Adaptive Signal Filtering Platform for a CPS/IoT Ecosystem";
in: "2021 22nd IEEE International Conference on Industrial Technology (ICIT)", IEEE, 2021, S. 1391 - 1396.

H. Isakovic, L. L. Ferreira, I. Okic, A. Dukkon, Z. Tucakovic, R. Grosu:
"QoS for Dynamic Deployment of IoT Services";
in: "2021 22nd IEEE International Conference on Industrial Technology (ICIT)", IEEE, 2021, S. 1144 - 1151.

C. Jandl, F. Taurer, M. Hartner-Tiefenthaler, M. Wagner, T. Moser, S. Schlund:
"Perceptions of Using Tracking and Tracing Systems in Work Environments";
in: "HCI in Business, Government and Organizations. HCII 2021. Lecture Notes in Computer Science", 12783; herausgegeben von: Springer, Cham.; Springer, 2021, ISSN: 0302-9743, S. 384 - 398.

J. Jia, M. Roth, B. Kerbl, M. Wimmer:
"View-Dependent Impostors for Architectural Shape Grammars";
in: "Pacific Graphics Short Papers, Posters, and Work-in-Progress Papers", Eurographics Association, 2021, ISBN: 978-3-03868-162-5, S. 63 - 64.

N. Jimenez-Segura, H. Wang, Ch. Hellmich, B. Pichler:
"Expansion of Cement Paste During Isothermal Adsorption: A Multiscale Poromechanical Model";
in: "Programme & Book of Abstracts of the ERICA CASH II Final Conference", TU Wien, Institute for Mechanics of Materials and Structures, 2021, S. 107 - 108.

N. Jimenez-Segura, H. Wang, Ch. Hellmich, B. Pichler:
"Expansion of Cement Paste During Isothermal Adsorption: A Multiscale Poromechanical Model";
in: "Engineering Mechanics Institute Conference 2021 (EMI 2021)", American Society of Civil Engineers (ASCE), 2021.

E. Jirousek, Z. Huang, S. Pratschner, R. Langwieser, S. Schwarz, M. Rupp:
"MmWave Fronthaul-To-Backhaul Interference in 5G NR Networks";
in: "32nd Annual International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC)", IEEE (Hrg.); IEEE, 2021, ISBN: 978-1-7281-7586-7, S. 1 - 6.

P. Jonke, M. Makoschitz, S. Biswas, J. Stöckl, H. Ertl:
"Analysis and Verification of a Cascaded Advanced AC-Simulator with Non-Linear Loads";
in: "IEEE Xplore", IEEE Xplore, 2021, ISBN: 978-1-7281-7161-6, S. 1 - 7.

H. Kaindl, R. Hoch, P. Roman, T. Rathfux, F. Lukasch:
"An Investigation of Problem Instance Difficulty for Case-Based Reasoning and Heuristic Search";
in: "Enterprise Information Systems - 22nd International Conference (ICEIS)", 417; herausgegeben von: Springer International Publishing; Springer International Publishing, Switzerland, 2021, ISBN: 978-3-030-75417-4, S. 158 - 183.

P. Kán, P. Ferschin, M. Honic, I. Kovacic:
"Building Information Monitoring via Gamification";
in: "Proceedings of the 16th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications - GRAPP", SciTePress, 2021, ISBN: 978-989-758-488-6, S. 261 - 270.

A. Karimi, L. Taghizadeh, C. Heitzinger:
"Optimal Bayesian experimental design for {EIT} inverse problems";
in: "Proc. SIAM Conference on Computational Science and Engineering (CSE 2021)", herausgegeben von: SIAM; SIAM, 2021.

M. Kenzel, B. Kerbl, M. Winter, M. Steinberger:
"CUDA and Applications to Task-based Programming";
in: "Eurographics 2021 - Tutorials", Eurographics Association, 2021, ISBN: 978-3-03868-135-9, S. 1 - 5.

B. Knauer:
"Wege der Erhaltung des historischen Stadtzentrums von Wien. Akteure, Interessen, Konflikte";
in: "Erhaltung. Akteure - Interessen - Utopien", Veröffentlichungen des Arbeitskreises Theorie und Lehre der Denkmalpflege e.V., Band 29; herausgegeben von: Stephanie Herold, Christian Raabe; arthistoricum.net, Heidelberg, 2021, ISBN: 978-3-948466-43-5, S. 14 - 21.

T. Koch, M. Wimmer:
"Guided Visibility Sampling++";
in: "Proceedings of the ACM on Computer Graphics and Interactive Techniques", 4; ACM Press, 2021, S. 1 - 16.

M. Königsberger, L. Göbel, L. Zelaya-Lainez, O. Lahayne, B. Pichler, Ch. Hellmich:
"Nanoindentation-Based Multiscale Micromechanics Model for Alkali-Activated Slag-Fly Ash Mixes";
in: "Programme & Book of Abstracts of the ERICA CASH II Final Conference", TU Wien, Institute for Mechanics of Materials and Structures, 2021, S. 111 - 112.

T. Köppel, E. Gröller, H. Wu:
"Context-Responsive Labeling in Augmented Reality";
in: "Proceedings of the 14th IEEE Pacific Visualization Symposium", herausgegeben von: IEEE; IEEE 14th Pacific Visualization Symposium (PacificVis), 2021, ISBN: 978-1-6654-3931-2, S. 1 - 10.

T. Komenda, M. Schelle, F. Kamhuber, S. Schlund:
"Exploiting the potential of human-machine work systems: Cycle-time reduction through simulation-based analysis and optimized task allocation";
in: "Simulation in Produktion und Logistik 2021", herausgegeben von: FAU Erlangen-Nürnberg; Cuvilier-Verlag, Göttingen, 2021, ISBN: 978-3-7369-7479-1, S. 453 - 462.

T. Komenda, C. Schmidbauer, D. Kames, S. Schlund:
"Learning to Share - Teaching the Impact of Flexible Task Allocation in Human-cobot Teams";
in: "Proceedings of the Conference on Learning Factories (CLF) 2021", herausgegeben von: Social Science Research Network; Social Science Research Network, 2021, ISSN: 1556-5068.

K. Kovacs, L. Reichsthaler et al.:
"Innovative Servicekonzepte durch prädiktive Instandhaltung";
in: "Instandhaltung als Erfolgsfaktor: Strategie Lebenszyklusbetrachtung und Digitalisierung", TÜV Media GmbH/TÜV Rheinland, 2021, (eingeladen), ISBN: 978-3-7406-0666-4, S. 339 - 356.

A. Krauck, D. Penz, M. Schedl:
"Team JKU-AIWarriors in the ACM Recommender Systems Challenge 2021: Lightweight XGBoost Recommendation Approach Leveraging User Features";
in: "RecSysChallenge 2021: RecSysChallenge '21: Proceedings of the Recommender Systems Challenge 2021", ACM, 2021, S. 39 - 43.

G. Kremer, S. Insulander, E. Draganits, M. Kronberger, B. Moshammer, M. Mosser, A. Rohatsch:
"Stone Supply for Carnuntum and Vindobona - Provenance Analysis in a Historico-Economical Context.";
in: "Proceedings of the 19th International Congress of Classical Archaeology, Cologne/Bonn, 22 - 26 May 2018, Archaeology and Economy in the Ancient World, (Eds.): The Exploitation of Raw Materials in the Roman World: A Closer Look at Producer-Resource Dynamics", 27; D. van Limbergen, D. Taelman, M. Bentz, M. Heinzelmann (Hrg.); herausgegeben von: Universities Cologne & Bonn; Propylaeum, Heidelberg, 2021, (eingeladen), ISBN: 978-3-948465-72-8, S. 47 - 62.

A. Kriegler, B. Csaba, M. Gelautz:
"Evaluation of Monocular and Stereo Depth Data for Geometry-Assisted Learning of 3D Pose";
in: "2021 44th Austrian Association for Pattern Recognition (OAGM) Joint Austrian Computer Vision and Robotics Workshop", Verlag der TU Graz, 2021, S. 1 - 7.

M. Kristan, J. Matas, A. Leonardis, M. Felsberg, R. Pflugfelder, J. Kämäräinen, H. Chang, M. Danelljan, L. Zajc, A. Lukezic, D. Ondrej, J. Käpylä et al.:
"The Ninth Visual Object Tracking VOT2021 Challenge Results";
in: "2021 IEEE/CVF International Conference on Computer Vision Workshops (ICCVW)", IEEE, 2021.

St. J. Kubin, A. Psenner:
"Camillo and Siegfried Sitte - a father-son relationship in urban planning theory";
in: "XXVIII International Seminar on Urban Form, ISUF2021: Urban Form and the Sustainable and Prosperous Cities", herausgegeben von: International Seminar on Urban Form; Alessandra Feliciotti; Martin Fleischmann; University of Strathclyde Publishing, Glasgow, 2021, ISBN: 9781914241161, S. 79 - 87.

J. Kuen, C. Schartmüller, P. Wintersberger:
"The TOR Agent: Optimizing Driver Take-Over with Reinforcement Learning";
in: "13th International Conference on Automotive User Interfaces and Interac-tive Vehicular Applications (AutomotiveUI ´21)", herausgegeben von: ACM; ACM, Leeds, UK, 2021, 6 S.

T. Kuflik, C. Barbu, A. Delic, D. Goldenberg, J. Neidhardt, L. Coba, M. Zanker:
"WebTour 2021 Workshop on Web Tourism";
in: "Proceedings of the 14th ACM International Conference on Web Search and Data Mining", ACM, 2021, S. 1157 - 1158.

A. Kulmukhametov, A. Rauber, C. Becker:
"Improving data quality in large-scale repositories through conflict resolution";
in: "International Journal on Digital Libraries", Springer-Verlag, 2021, S. 365 - 383.

D. Kumar, K. Kroechert Ching, G. Kalss, G. Liedl:
"Femtosecond laser structuring of nodular cast iron for anticorrosion and thermally stable superhydrophobic surface";
in: "Lasers in Manufacturing Conference", herausgegeben von: WLT; WLT - Wissenschaftliche Gesellschaft Lasertechnik e.V., 2021, 6 S.

P. Kuttke, V. Jagsch, St. Scheiner, Ch. Hellmich:
"The Structural Mechanics of the Vienna Tramway Rails: Advanced Beam Theory-Assisted 1D/2D FE Modelling";
in: "Book of Abstracts of Engineered Materials for Sustainable Structures (EM4SS'21)", University of Modena and Reggio Emilia, 2021.

O. Lahayne, L. Zelaya-Lainez, T. Buchner, J. Eberhardsteiner:
"Influence of Nano-Additives on the Elasticity of Cement";
in: "Book of Abstracts of the 37th Danubia Adria Symposium on Advances in Experimental Mechanics", Johannes Kepler University, 2021, ISBN: 978-3-9504997-0-4, S. 16 - 17.

E. Langegger, H. Böck, M. Villa:
"Effect Of Covid On The Austrian University Courses In Nuclear";
in: "NESTet 2021 - Proceedings", European Nuclear Society, 2021, ISBN: 978-92-95064-37-9, S. 1 - 10.

P. Lebiedowicz, J. Leutgeb, O. Nachtmann, A. Rebhan, A. Szczurek:
"Central exclusive diffractive production of axial-vector f1 mesons in proton-proton collisions";
in: "40th International Conference on High Energy physics (ICHEP2020)", Proceedings of Science (PoS), Trieste, 2021, Paper-Nr. 492, 6 S.

J. Leutgeb, A. Rebhan:
"Axial vector transition form factors in holographic QCD and their contribution to the muon g-2";
in: "40th International Conference on High Energy physics (ICHEP2020)", Proceedings of Science (PoS), Trieste, 2021, Paper-Nr. 671, 6 S.

H. Lovasz-Bukvova, M. Hölzl, G. Kormann-Hainzl, T. Moser, T. Zigart, S. Schlund:
"Usability and Task Load of Applications in Augmented and Virtual Reality";
in: "Systems, Software and Services Process Improvement. EuroSPI 2021", 1442; herausgegeben von: Springer, Cham.; Springer, 2021, S. 708 - 718.

C. Magg, L. Toussaint, L. Muren, D. Indelicato, R. Raidou:
"Visual Assessment of Growth Prediction in Brain Structures after Pediatric Radiotherapy";
in: "VCBM 2021: Eurographics Workshop on Visual Computing for Biology and Medicine", Eurographics Association, 2021, ISBN: 978-3-03868-140-3, S. 31 - 35.

T. Majchrzak, H. Kaindl, T. Gronli:
"Introduction to the HICSS-54 Software Development for Mobile Devices, the Internet-of-Things, and Cyber-Physical Systems Minitrack";
in: "Proceedings of the 54th Hawaii International Conference on System Sciences", Proceedings of the 54th Hawaii International Conference on System Sciences, 2021, S. 7195 - 7196.

C. Mecklenbräuker, P. Gerstoft, E. Ollila:
"Qualitatively Robust Bayesian Learning for DOA from Array Data using M-Estimation of the Scatter Matrix";
in: "International ITG Workshop on Smart Antennas (WSA 2021)", IEEE Xplore, 2021, (eingeladen), 6 S.

O. Melnyk, L. Winkler, M. Weigert:
"Retrospektive und Perspektive der Internationalen Baubetriebsforschung";
in: "Festschrift anläßlich des 50-jährigen Bestehens der Forschungsbereiche für Baubetrieb und Bauwirtschaft", herausgegeben von: Institut für Interdisziplinäres Bauprozessmanagement; TU-MV Media Verlag GmbH, 1040 Wien, 2021, ISBN: 978-3-903311-26-8, S. 345 - 369.

M. Mirzaei, P. Kán, H. Kaufmann:
"Head Up Visualization of Spatial Sound Sources in Virtual Reality for Deaf and Hard-of-Hearing People";
in: "IEEE Virtual Reality and 3D User Interfaces (VR)", IEEE Computer Society, 2021, S. 582 - 587.

M. Mirzaei, P. Kán, H. Kaufmann:
"Multi-modal Spatial Object Localization in Virtual Reality for Deaf and Hard-of-Hearing People";
in: "IEEE Virtual Reality and 3D User Interfaces (VR)", IEEE Computer Society, 2021, S. 588 - 596.

E. Montero, M Vogelsberger, T. Wolbank:
"Sensorless Identification of Machine Saliencies in Induction Motors in the Presence of Periodic Mechanical Disturbances´";
in: "23rd European Conference on Power Electronics and Applications (EPE'21 ECCE Europe)", 23; herausgegeben von: IEEE Xplore; IEEE Xplore, 2021, ISBN: 978-9-0758-1537-5, S. 1 - 8.

G. Morais, D. Bork, M. Adda:
"Towards an Ontology-driven Approach to Model and Analyze Microservices Architectures";
in: "MEDES´21: 13th International Conference on Management of Digital EcoSystems", ACM Press, 2021, ISBN: 978-1-4503-8314-1, S. 79 - 86.

S. Mortezapoor, K. Vasylevska:
"Safety and Security Challenges for Collaborative Robotics in VR";
in: "Proceedings of the 1st International Workshop on Security for XR and XR for Security (VR4Sec) at Symposium On Usable Privacy and Security (SOUPS) 2021", USENIX Conference Proceedings, 2021, S. 1 - 4.

S. Murzin, N. Kazanskiy, C. Stiglbrunner:
"Development of technologies of laser material processing with use of diffractive optics";
in: "2021 International Conference on Information Technology and Nanotechnology (ITNT)", herausgegeben von: IEEE; IEEE, 2021, 6 S.

M. Musleh, A. Chatzimparmpas, I. Jusufi:
"Visual Analysis of Industrial Multivariate Time Series";
in: "The 14th International Symposium on Visual Information Communication and Interaction", Association for Computing Machinery, 2021, ISBN: 9781450386470, S. 1 - 5.

G. Nawratil, A. Kapilavai:
"Metrics for distance computation between 3-RPR configurations. P";
in: "Proc. of 7. IFToMM D-A-CH Konferenz", Universität Duisburg Essen, 2021.

J. Neidhardt, W. Wörndl, T. Kuflik, M. Zanker:
"Workshop on Recommenders in Tourism (RecTour)";
in: "Fifteenth ACM Conference on Recommender Systems", ACM, 2021, S. 815 - 816.

M. Nikowitz, M. Hofer, M. Schrödl:
"Position Sensorless Control of a Ferrite Magnet assisted Synchronous Reluctance Machine in the Whole Speed Range";
in: "PCIM Europe digital days 2021; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management", herausgegeben von: IEEE Xplore; VDE Verlag, 2021, ISBN: 978-3-8007-5515-8, S. 1 - 7.

A. M. Ningtyas, A. El-Ebshihy, F. Piroi, L. Andersson, A. Hanbury:
"TUW-IFS at TREC NEWS 2020 Wikification Task";
in: "The Twenty-Ninth Text REtrieval Conference (TREC 2020) Proceedings", NIST, 2021, S. 1 - 10.

S. Ohrhallinger, J. Peethambaran, A. Parakkat, T. Dey, R. Muthuganapathy:
"2D Points Curve Reconstruction Survey and Benchmark";
in: "Eurographics 2021", Eurographics Association, 2021, S. 1 - 22.

M. Ossiander, K. Golyari, K. Scharl, L. Lehnert, F. Siegrist, D. Zimin, M. Weidmann, I. Floss, V. Smejkal, C. Lemell, J. Burgdörfer, F. Krausz, M. Schultze:
"Attosecond Vacuum-Ultraviolet Photoconductive Switching in Dielectrics";
in: "2020 Conference On Lasers And Electro-Optics (cleo)", herausgegeben von: IEEE; CLEO, 2021, ISBN: 978-1-943580-76-7, 2 S.

C. Ossimitz, N. TaheriNejad:
"A Fast Line Segment Detector Using Approximate Computing";
in: "2021 IEEE International Symposium on Circuits and Systems (ISCAS)", herausgegeben von: IEEE; IEEE International Symposium on Circuits and Systems (ISCAS), 2021, ISBN: 978-1-7281-9201-7, 5 S.

T. Oswald, G. Strasser:
"Zu Finanzierungskosten und der Abgeltung von erhöhten Finanzierungskosten";
in: "Festschrift anläßlich des 50-jährigen Bestehens der Forschungsbereiche für Baubetrieb und Bauwirtschaft", herausgegeben von: Institut für Interdisziplinäres Bauprozessmanagement; TU-MV Media Verlag GmbH, 1040 Wien, 2021, ISBN: 978-3-903311-26-8, S. 371 - 384.

A. Pacha:
"The Challenge of Reconstructing Digits in Music Scores";
in: "Proceedings of the 3rd International Workshop on Reading Music Systems", J. Calvo-Zaragoza, A. Pacha (Hrg.); Proceedings of the 3rd International Workshop on Reading Music Systems, Alicante, Spain, 2021, S. 4 - 7.

D. Pahr, H. Wu, R. Raidou:
"Vologram: An Educational Holographic Sculpture for Volumetric Medical Data Physicalization";
in: "VCBM 2021: Eurographics Workshop on Visual Computing for Biology and Medicine", Eurographics Association, 2021, ISSN: 2070-5786, S. 19 - 23.

L. Panfili, M. Wimmer, K. Krösl:
"Myopia in Head-Worn Virtual Reality";
in: "2021 IEEE Conference on Virtual Reality and 3D User Interfaces Abstracts and Workshops (VRW)", IEEE Computer Society Press, 2021, ISBN: 978-1-6654-1166-0, S. 1 - 2.

F. Pasic, S. Pratschner, R. Langwieser, D. Schützenhöfer, E. Jirousek, H. Groll, S. Caban, M. Rupp:
"Sub 6 GHz versus mmWave Measurements in a Controlled High-Mobility Environment";
in: "Proceedings of the 25th International ITG Workshop on Smart Antennas (WSA 2021)", VDE Verlag, Berlin-Offenbach, Germany, 2021, ISBN: 978-3-8007-5686-5, S. 13 - 16.

L. Patino, J. Boyle, J. Ferryman, J. Auer, J. Pegoraro, R. Pflugfelder, M. Cokbas, K. Janusz, I. Prakash, G. Slavic, L. Marcenaro, Y. Jiang, Y. Jin, K. Hanseok, G. Zhao, G. Ben-Yosef, J. Qiu:
"PETS2021: Through-foliage detection and tracking challenge and evaluation";
in: "2021 17th IEEE International Conference on Advanced Video and Signal Based Surveillance (AVSS)", IEEE, 2021.

K. Payette, P. Dumast, A. Jakab, M. Cuadra, L. Vasung, R. Licandro, B. Menze, H. Li:
"Fetal Brain Tissue Annotation and Segmentation Challenge";
in: "24th International Conference on Medical Image Computing and Computer Assisted Intervention (MICCAI 2021)", Zenodo, 2021, 15 S.

B. Pichler, M. Königsberger, M. Irfan-Ul-Hassan, E. Binder, M. Ausweger, Ch. Hellmich:
"Innovative Creep Testing of Hydrating Cementitious Materials at Early Ages: Hourly-Repeated 3-Minute Creep Experiments";
in: "Technical Program and Abstracts of EMI 2021 / PMC 2021", American Society of Civil Engineers (ASCE), 2021.

M. Pinsker, A. Mottet, M. Wrona:
"Smooth approximations and relational width collapses";
in: "Proceedings of the 48th International Colloquium on Automata, Languages and Programming", 138; herausgegeben von: Leibniz International Proceedings in Informatics Series; Proceedings of the 48th International Colloquium on Automata, Languages and Programming, Leibniz, 2021, S. 1 - 20.

S. Plakolm-Forsthuber:
""Der lange braune Schatten" Das Institut für Kunstgeschichte an der Technischen Hochschule Wien im Nationalsozialismus und in der Nachkriegszeit";
in: "Kunstgeschichte an Polytechnischen Instituten, Technischen Hochschulen, Technischen Universitäten Geschichte-Positionen-Perspektiven", 1; R. Stalla (Hrg.); herausgegeben von: Institut für Kunstgeschichte, Bauforschung und Denkmalpflege; Böhlau Verlag Wien - Köln - Weimar, Wien, 2021, ISBN: 978-3-205-20914-0, S. 273 - 300.

A. Posekany:
"Outlier detection in Bioinformatics with Mixtures of Gaussian and heavy-tailed distributions";
in: "Proceedings of the 3rd International Data Science Conference - iDSC2020", herausgegeben von: iDSC; Data Science - Analytics and Applications, 2021, ISBN: 978-3-658-32181-9, S. 58 - 65.

A. Preh, E. Fleris, M. Illeditsch:
"Vom Bemessungsblock zur Gefahrenkarten: Stolpersteine bei der Bewertung der Steinschlaggefahr";
in: "Tiroler Geotechniktag 2019 Naturgefahren", 1; R. Hofmann (Hrg.); herausgegeben von: Universität Innsbruck, Institut für Infrastruktur, Arbeitsbereich Geotechnik; Innsbruck (university press), Innsbruck, 2021, (eingeladen), ISBN: 978-3-99106-050-5, S. 85 - 107.

R. Prestros, K. Hollaus, B. Auinger, M. Leumüller:
"Benchmark for the Near-Field Problem: Simulation versus Measurement";
in: "2020 International Symposium on Electromagnetic Compatibility - EMC EUROPE", 1; F. Maradei, M. Feliziani, M. Sarto (Hrg.); 2020 International Symposium on Electromagnetic Compatibility - EMC EUROPE, IEEE, Danvers, MA, USA, 2021, ISBN: 978-1-7281-5579-1, Paper-Nr. 20096561, 5 S.

H. Proper, D. Bork, G. Poels:
"Towards an Ontology-Driven Approach for Digital Twin Enabled Governed IT Management";
in: "Joint Proceedings of the Semantics co-located events: Poster&Demo track and Workshop on Ontology-Driven Conceptual Modelling of Digital Twins (SemanticsP&Ds 2021), Amsterdam and Online, September 6-9, 2021", I. Tiddi, M. Maleshkova, T. Pellegrini, V. de Boer (Hrg.); herausgegeben von: CEUR-WS; CEUR-WS.org, 2021, S. 1 - 14.

A Qerkini, M Vogelsberger, W. Grubelnik, T. Wolbank:
"Identification of stator insulation material partial discharge parameters during lifetime";
in: "IEEE International Conference on Industrial Technology (ICIT)", IEEE, 2021, ISBN: 978-1-7281-9297-0, S. 99 - 105.

D. Quarta, M. Ianni, A. Machiry, Y. Fratantonio, E. Gustafson, D. Balzarotti, M. Lindorfer, G. Vigna, C. Krügel:
"Tarnhelm: Isolated, Transparent & Confidential Execution of Arbitrary Code in ARM´s TrustZone";
in: "Research on offensive and defensive techniques in the Context of Man At The End (MATE) Attacks (Checkmate ´21)", ACM (Hrg.); herausgegeben von: ACM; ACM, New York, 2021, ISBN: 978-1-4503-8552-7.

D. Radovic, C. Mecklenbräuker, T. Blazek:
"OTFS Performance Over Different Measured Vehicular 60 GHz Millimeter-Wave Channels";
in: "29th International Conference on Software, Telecommunications and Computer Networks (SoftCOM)", herausgegeben von: IEEE; IEEE Xplore, 2021, 5 S.

M. Radwan, S. Ohrhallinger, M. Wimmer:
"Fast occlusion-based point cloud exploration";
in: "Computer Graphics International 2021", 37; Springer, 2021, S. 2769 - 2781.

J. Ralyté, D. Bork, M. Jeusfeld, M. Kirikova, J. Stirna:
"Panel Discussion: How to Build a Perfect Enterprise Modeling Method";
in: "Proceedings of the Forum at Practice of Enterprise Modeling 2021 (PoEM-Forum 2021) (PoEM 2021)", CEUR-WS.org, 2021, (eingeladen), S. 78 - 87.

G. Recski, B. Lellmann, A. Kovacs, A. Hanbury:
"Explainable Rule Extraction via Semantic Graphs";
in: "Proceedings of the Fifth Workshop on Automated Semantic Analysis of Information in Legal Text (ASAIL 2021)", herausgegeben von: CEUR Workshop Proceedings; CEUR-WS.org, 2021, S. 24 - 35.

A. Redlein, C. Lau:
"Problem-Based Learning im ERP Unterricht: Ergebnisse einer Case Study bei 300 Studierenden";
in: "Proceedings of the SAP Academic Community Conference 2021 DACH", herausgegeben von: Technische Universität München; ACC SAP University Competence Center, 2021, S. 32 - 41.

A. Redlein, E. Stopajnik:
"Facility Services: An Underestimated Sector?";
in: "Eurasian Business and Economics Perspectives Proceedings of the 31st Eurasia Business and Economics Society Conference", 18; herausgegeben von: Eurasia Business and Economics Society; Springer-Verlag, Cham, Schweiz, 2021, ISBN: 978-3-030-71868-8, S. 197 - 204.

A. Redlein, L. Thrainer, C. Lau:
"Problem-based learning for the teaching of FM skills: results of a practical use";
in: "Research Papers The 20th EuroFM Research Symposium", herausgegeben von: EuroFM; EuroFM, The Hague, 2021, S. 104 - 111.

F. Rinker, L. Waltersdorfer, M. Schüller, S. Biffl, D. Winkler:
"A Multi-Model Reviewing Approach for Production Systems Engineering Models";
in: "Model-Driven Engineering and Software Development. MODELSWARD 2020. Communications in Computer and Information Science, vol 1361", Springer, Schweiz, 2021, ISBN: 978-3-030-67444-1, S. 121 - 146.

M. Romiti, F. Victor, P. Moreno-Sanchez, P. Nordholt, B. Haslhofer, M. Maffei:
"Cross-Layer Deanonymization Methods in the Lightning Protocol";
in: "Financial Cryptography and Data Security", LNCS, volume 12674; herausgegeben von: Springer Verlag; Springer LNCS, Berlin Heidelberg, 2021, ISBN: 978-3-662-64321-1, S. 187 - 204.

H. Sahin, H. Müller, S. Sadeghian, A. Löcken, A. Matviienko, M. Colley, A. Habibovic, P. Wintersberger:
"Workshop on Prosocial Behavior in Future Mixed Traffic";
in: "3th International Conference on Automotive User Interfaces and Interac-tive Vehicular Applications (AutomotiveUI ´21)", ACM (Hrg.); herausgegeben von: ACM; ACM, Leeds, UK, 2021, 4 S.

St. Scheiner:
"Utilization of Continuum Micromechanical Up- and Down-Scaling Relations for Studying Transport Processes in Porous Media";
in: "Programme & Book of Abstracts of the International Symposium on Interdisciplinary Research in Civil Engineering Sciences (IS-IRCES)", Technische Universität Wien, 2021, S. 16.

T. Schlappal, J. Kalliauer, M. Schweigler, S. Gmainer, M. Vill, J. Eberhardsteiner, H.A. Mang, B. Pichler:
"Structural Mechanics of Reinforced Concrete Hinges: From Laboratory Testing to Design Recommendations";
in: "Programme & Book of Abstracts of the International Symposium on Interdisciplinary Research in Civil Engineering Sciences (IS-IRCES)", Technische Universität Wien, 2021, S. 15.

T. Schlappal, J. Kalliauer, M. Schweigler, S. Gmainer, M. Vill, M. Peyerl, H.A. Mang, B. Pichler, J. Eberhardsteiner:
"Concrete Hinges: Laboratory Testing, Finite Element Analysis, Design Recommendations";
in: "Book of Abstracts of the 37th Danubia Adria Symposium on Advances in Experimental Mechanics", Johannes Kepler University, 2021, (eingeladen), ISBN: 978-3-9504997-0-4, S. 92 - 93.

S. Schlund, F. Ansari:
"Fit for Future Work - Dynamisierung des Kompetenz-Profiling mithilfe KI-gestützter Datenanalyse betrieblicher Prozesse";
in: "Austrian Management Review", 11; W. Güttel (Hrg.); Nomos Verlagsgesellschaft, Baden-Baden, 2021, S. 96 - 102.

S. Schlund, M. Schmidt:
"Robotic Process Automation in Industrial Engineering: Challenges and Future Perspectives";
in: "Lecture Notes in Networks and Systems", 274; herausgegeben von: Springer, Cham.; Springer, 2021, ISSN: 2367-3389, S. 320 - 327.

H Schmid, M. Schrödl, M van Heyden:
"Design Space Analysis Including Experimental Verification for an Electrical Machine Based on a Parametric and Functional IPMSM Model";
in: "IEEE Transactions on Industrial", 68; herausgegeben von: IEEE Xplore; IEEE Xplore, 2021, S. 7863 - 7873.

C. Schmidbauer, S. Schlund, T. Ionescu, B. Hader:
"Adaptive Task Sharing in Human-Robot Interaction in Assembly";
in: "2020 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM)", herausgegeben von: IEEE; IEEE, 2021, S. 546 - 550.

O. Schürer, C. Hubatschke:
"Alien Inhabitancy. Artifizielle Introspektion, Artifizielle Intuition oder Artifizielle Ignoranz - die nächste Maschine";
in: "Gewissheit", O. Dimbath (Hrg.); herausgegeben von: Oliver Dimbath; Beltz Verlag, Weinheim Basel, 2021, ISBN: 978-3-7799-6281-6, S. 527 - 539.

M. Schütz, B. Kerbl, M. Wimmer:
"Rendering Point Clouds with Compute Shaders and Vertex Order Optimization";
in: "Computer Graphics Forum", 40; Eurographics Association, 2021, ISSN: 1467-8659, S. 115 - 126.

M. Schuß, P. Wintersberger, A. Riener:
"Let´s Share a Ride into the Future: A Qualitative Study Comparing Hypothetical Implementation Scenarios of Automated Vehicles";
in: "CHI '21: Proceedings of the 2021 CHI Conference on Human Factors in Computing Systems", ACM (Hrg.); herausgegeben von: ACM; ACM, Virtual Conference, 2021, S. 1 - 11.

S. Scott-Sharoni, N. Fereydooni, B. Walker, J. Myounghoon, A. Riener, P. Wintersberger:
"To Customize or Not to Customize - Is That the Question?";
in: "13th International Conference on Automotive User Interfaces and Interac-tive Vehicular Applications (AutomotiveUI ´21)", herausgegeben von: ACM; ACM, Leeds, UK, 2021, 4 S.

K. Sharifmoghaddam, G. Nawratil, A. Rasoulzadeh, J. Tervooren:
"Using Flexible Trapezoidal Quad-Surfaces for Transformable Design";
in: "Proceedings of the IASS Annual Symposium 2020/21 and the 7th International Conference on Spatial Structures Inspiring the Next Generation", herausgegeben von: S.A. Behnejad, G.A.R. Parke and O.A. Samavati (eds.); IASS, 2021.

S. Sietzen, M. Lechner, J. Borowski, R. Hasani, M. Waldner:
"Interactive Analysis of CNN Robustness";
in: "Computer Graphics Forum", 40; John Wiley and Sons, 2021, ISSN: 1467-8659, S. 253 - 264.

W. Sihn, R. Glawar, L. Reichsthaler et al.:
"Die Vision der "instandhaltungsfreien Fabrik"";
in: "Instandhaltung als Erfolgsfaktor: Strategie Lebenszyklusbetrachtung und Digitalisierung", H. Biedermann (Hrg.); TÜV Media GmbH/TÜV Rheinland, 2021, (eingeladen), ISBN: 978-3-7406-0666-4, S. 151 - 163.

M. Smajevic, D. Bork:
"From Conceptual Models to Knowledge Graphs: A Generic Model Transformation Platform";
in: "2021 ACM/IEEE International Conference on Model Driven Engineering Languages and Systems Companion (MODELS-C) - Tools & Demonstrations Track", herausgegeben von: ACM/IEEE; IEEE Xplore Digital Library, USA, 2021, ISBN: 978-1-6654-2484-4, S. 610 - 614.