TU Home
Diese Publikationsliste wurde automatisch aus den Publikationsdaten der Fakultät für Bauingenieurwesen erstellt. Wenn Sie komplexere Suchabfragen vornehmen wollen, rufen Sie bitte die Seite "Publikationen der Fakultät" direkt auf, oder verwenden Sie die globale Suchfunktion der Publikationsdatenbank der Technischen Universität Wien!

 Publikationsdatenbank Home  

Publikationsliste für
Olaf Lahayne
E202 - Institut für Mechanik der Werkstoffe und Strukturen
als Autorin / Autor bzw. wesentlich beteiligte Person

45 Datensätze (1998 - 2020)

Die Publikationen der Fakultät für Bauingenieurwesen sind erst ab dem Jahr 2002 vollzählig in der Publikationsdatenbank enthalten. Publikationen aus den Jahren vor 2002 können, müssen aber nicht in der Datenbank vorhanden sein.


Zeitschriftenartikel

  1. M. Ausweger, E. Binder, O. Lahayne, R. Reihsner, G. Maier, M. Peyerl, B. Pichler:
    "Early-Age Evolution of Strength, Stiffness, and Non-Aging Creep of Concretes: Experimental Characterization and Correlation Analysis";
    Materials, 12 (2019), 2; 17 S.
  2. T. Bader, F. Dastoorian, G. Ebrahimi, G. Unger, O. Lahayne, Ch. Hellmich, B. Pichler:
    "Combined Ultrasonic-Mechanical Characterization of Orthotropic Elastic Properties of an Unrefíned Bagasse Fiber-Polypropylene Composite";
    Composites - Part B: Engineering, 95 (2016), S. 96 - 104.
  3. L. Deilmann, O. Winter, B. Cerrutti, H. Bradtmüller, C. Herzig, A. Limbeck, O. Lahayne, Ch. Hellmich, D. Eder:
    "Effect of boron incorporation on the bioactivity, structure, and mechanical properties of ordered mesoporous bioactive glasses";
    Journal of Materials Chemistry B, 8 (2020), S. 1456 - 1465.
  4. I. Furin, M. Pastrama, H. Kariem, K. Luczynski, O. Lahayne, Ch. Hellmich:
    "A New Nanoindentation Protocol for Identifying the Elasticity of Undamaged Extracellular Bone Tissue";
    MRS Advances, 1 (2016), S. 693 - 704.
  5. J. Hum, K. Luczynski, P. Nooeaid, P. Newby, O. Lahayne, Ch. Hellmich, A. Boccaccini:
    "Stiffness Improvement of 45S5 Bioglass-Based Scaffolds through PCL and Collagen Coatings: An Ultrasonic Study";
    Strain, 49 (2013), S. 434 - 439.
  6. P. Karte, M. Hlobil, R. Reihsner, W. Dörner, O. Lahayne, J. Eberhardsteiner, B. Pichler:
    "Unloading-Based Stiffness Characterisation of Cement Pastes During the Second, Third and Fourth Day After Production";
    Strain, 51 (2015), S. 156 - 169.
  7. B. Khroustalev, J. Eberhardsteiner, O. Lahayne, S. Leonovich, G. Yakovlev, G. Pervushin:
    "Nano-Tests on Concrete Samples with and without Nanotubes";
    Science & Technique, 5 (2013), S. 35 - 39.
  8. B. Khroustalev, S. Leonovich, G. Yakovlev, I. Polianskich, O. Lahayne, J. Eberhardsteiner, G. Skripkiunas, I. Pudov, E. Karpova:
    "Structural Modification of New Formations in Cement Matrix Using Carbon Nanotube Dispersions and Nanosilica";
    Science & Technique, 16 (2017), 2; S. 93 - 103.
  9. O. Lahayne, J. Eberhardsteiner, R. Reihsner:
    "Tribological Investigations Carried out by a Linear Friction Tester";
    Transactions of FAMENA, 33 (2009), S. 15 - 22.
  10. O. Lahayne, B. Pichler, R. Reihsner, J. Eberhardsteiner, J. Suh, D. Kim, S. Nam, H. Paek, B. Lorenz, B. Persson:
    "Rubber Friction on Ice: Experiments and Modeling";
    Tribology Letters, 62 (2016), 17.
  11. K. Luczynski, A. Dejaco, O. Lahayne, J. Jaroszewicz, W. Swieszkowski, Ch. Hellmich:
    "MicroCT/Micromechanics-Based Finite Element Models and Quasi-Static Unloading Tests Deliver Consistent Values for Young's Modulus of Rapid-Prototyped Polymer-Ceramic Tissue Engineering Scaffold";
    CMES - Computer Modeling in Engineering and Sciences, 87 (2012), 6; S. 505 - 529.
  12. A. Malandrino, A. Fritsch, O. Lahayne, K. Kropik, H. Redl, J. Noailly, D. Lacroix, Ch. Hellmich:
    "Anisotropic Tissue Elasticity in Human Lumbar Vertebra, from Ultrasonics and Micromechanics";
    Materials Letters, 78 (2012), S. 154 - 158.
  13. V. Peretti, S. Ferraris, G. Gautier, Ch. Hellmich, O. Lahayne, B. Stella, S. Yamaguchi, S. Spriano:
    "Surface Treatments for Boriding of Ti6A14V Alloy in View of Applications as a Biomaterial";
    Tribology International, 126 (2018), S. 21 - 28.
  14. J. Schramm, R. Mundl, B. Wies, A. Becker, J. Eberhardsteiner, O. Lahayne:
    "Reibtests von Gummi auf Schnee und Eis zum Studium des Einflusses von Profil und Mischung im Reifen-Straße-Kontakt";
    VDI Berichte, 2022 (2007), S. 225 - 239.
  15. G. Yakovlev, G. Skripkiunas, I. Polianskich, O. Lahayne, J. Eberhardsteiner, L. Urkhanova, I. Pudov, S. Sychogov, E. Karpova, S. Sen´Kov:
    "Modification of Cement Matrix Using Carbon Naotube Dispersions and Nanosilica";
    Procedia Engineering, 172 (2017), S. 1261 - 1269.

Beiträge in Tagungsbänden

  1. E. Binder, G. Maier, O. Lahayne, R. Reihsner, M. Ausweger, M. Peyerl, B. Pichler:
    "Do Modern Concretes Exhibit Similar Early-Age Stiffness and Strength Developments as their Predecessors?";
    in: "Proceedings of the 34th Danubia-Adria Symposium on Advances in Experimental Mechanics", University of Trieste, 2017, ISBN: 978-88-8303-863-1, Paper-Nr. 8049, 2 S.
  2. E. Binder, R. Reihsner, O. Lahayne, J. Eberhardsteiner, B. Pichler:
    "Adaptation of a Cruciform Testing Machine Zwick/Roell Z050 for Biaxial Compression Creep Experiments";
    in: "Book of Extended Abstracts of the 36th Danubia Adria Symposium on Advances in Experimental Mechanics", University of West Bohemia, 2019, ISBN: 978-80-261-0876-4, S. 109 - 110.
  3. P. Dohnalik, O. Lahayne, Ch. Hellmich, B. Pichler:
    "Stiffness and Strength of Mature Dental Cement Paste";
    in: "Programme & Proceedings of the China-Austria Forum for Postgraduates of Civil Engineering", J. Zhang, B. Pichler (Hrg.); Vienna University of Technology, 2019, S. 69 - 71.
  4. J. Eberhardsteiner, O. Lahayne:
    "Nano-Tests on Concrete Samples with and without Nanotubes";
    in: "Proceedings of the VI International Conference on Nanotechnologies in Construction", Publishing LLC RIF "MATERIALS", 2014, S. 21 - 24.
  5. J. Eberhardsteiner, S. Schmid, O. Lahayne, R. Reihsner, B. Pichler:
    "Micro-and Macroscopic Characterization of Granite";
    in: "Proceedings of the 35th Danubia-Adria Symposium on Advances in Experimental Mechanics", Editura Printech, 2018, ISBN: 978-606-23-0874-2, S. 61 - 62.
  6. J. Hum, K. Luczynski, P. Nooeaid, P. Newby, O. Lahayne, Ch. Hellmich, A. Boccaccini:
    "Stiffness Improvement of 45S5 Bioglass-Based Scaffolds through PCL and Collagen Coatings: An Ultrasonic Study";
    in: "Proceedings of the 30th Danubia-Adria-Symposium (DAS 30)", Croatian Society of Mechanics, 2013, ISBN: 978-953-7539-17-7, S. 93 - 94.
  7. V. Jagsch, P. Hasslinger, O. Lahayne, Ch. Hellmich, St. Scheiner:
    "Stiffness Determination in Steel Specimens Originating from New and Discarded Tramway Rails by Means of Nanoindentation";
    in: "Book of Abstracts of the 35th Danubia Adria Symposium on Advances in Experimental Mechanics", Editura Printech, 2018, ISBN: 978-606-23-0874-2, S. 27 - 28.
  8. O. Lahayne, J. Eberhardsteiner:
    "Investigation of the Temperature Behaviour of Sliding Rubber Materials";
    in: "Computer Methods and Experimental Measurements for Surface Effects and Contact Mechanics VIII", WIT Press, 2007, ISBN: 978-1-84564-073-6, S. 155 - 164.
  9. O. Lahayne, J. Eberhardsteiner:
    "The Experimental Investigation of Frictional Behaviour of Rubber Materials";
    in: "CD-ROM Proceedings of the 12th International Conference on Experimental Mechanics (ICEM12)", C. Pappalettere (Hrg.); EURASEM, 2004, ISBN: 88-386-6273-8, 8 S.
  10. O. Lahayne, J. Eberhardsteiner, Y. G., S. Leonovich, G. Pervushin:
    "Nano-Tests on Concrete Samples with and without Nanotubes";
    in: "Proceedings of the International Conference on Fracture Mechanics of Concrete, Reinforced Concrete and other Building Materials", Russian Academy of Architecture and Building Sciences, Voronezh, Russia, 2013, ISBN: 978-5-89040-466-4, S. 3 - 13.
  11. O. Lahayne, J. Eberhardsteiner, R. Reihsner:
    "Tribological Investigations Using a Linear Friction Tester";
    in: "Proceedings of the 25th Danubia-Adria Symposium on Developments in Experimental Mechanics", Powerprint, Praha, 2008, ISBN: 978-80-01-04162-8, S. 141 - 142.
  12. K. Luczynski, A. Dejaco, O. Lahayne, J. Jaroszewicz, W. Swieszkowski, Ch. Hellmich:
    "Micro-CT/Micromechanics-Based Finite Element Models and Quasi-Static Unloading Tests Deliver Consistent Values for Young's Modulus of Rapid-Prototyped Polymer-Ceramic Tissue Engineering Scaffold";
    in: "Proceedings of the 29th Danubia-Adria-Symposium (DAS 29)", University of Belgrade, Belgrade, 2012, ISBN: 978-86-7083-762-1, S. 2 - 3.
  13. K. Luczynski, A. Dejaco, O. Lahayne, J. Jaroszewicz, W. Swieszkowski, Ch. Hellmich:
    "Micro-CT/Micromechanics-Based Finite Element Models and Quasi-Static Unloading Tests Deliver Consistent Values for Young's Modulus of Rapid-Prototyped Polymer-Ceramic Tissue Engineering Scaffold";
    in: "Book of Abstracts of 2nd Joint Meeting of COST Action MP1005, From Nano to Macro Biomaterials and Applications to Stem Cells Regeneration Orthopedic and Dental Medicine (NAMABIO)", Institute for Strength of Materials, Vienna University of Technology, Vienna, 2012, ISBN: 978-3-9502481-7-3, S. 53 - 54.
  14. K. Luczynski, A. Dejaco, O. Lahayne, J. Jaroszewicz, W. Swieszkowski, Ch. Hellmich:
    "MicroCT/Micromechanics-Based Finite Element Models and Quasi-Static Unloading Tests Deliver Consistent Values for Youngs's Modulus of Rapid-Prototyped Polymer-Ceramic Tissue Engineering Scaffold";
    in: "Book of Abstracts - 5th Vienna Biomaterialsymposium", TU Wien, Wien, 2012.
  15. L. Zelaya-Lainez, O. Lahayne, G. Balduzzi, Ch. Hellmich:
    "Micromechanics of Non-Embedded Spruce Wood: Novel Polishing and Indentation Protocol";
    in: "Book of Extended Abstracts of the 36th Danubia Adria Symposium on Advances in Experimental Mechanics", University of West Bohemia, 2019, ISBN: 978-80-261-0876-4, S. 157 - 158.

Vorträge und Posterpräsentationen (ohne Tagungsband-Eintrag)

  1. J. Eberhardsteiner, W. Fidi, O. Lahayne:
    "Experimental Investigation of Adhesive Friction Properties of Rubber on Wet Surfaces";
    Poster: 15th Danubia-Adria Symposium on Experimental Methods in Solid Mechanics, Bertinoro, Italy; 30.09.1998 - 03.10.1998.
  2. O. Lahayne:
    "Investigation of the Temperature Behaviour of Sliding Rubber Materials";
    Vortrag: Eighth International Conference on Computer Methods and Experimental Measurements for Surface Effects and Contact Mechanics, Ashurst, Southampton, United Kingdom; 16.05.2007 - 18.05.2007.
  3. O. Lahayne:
    "Nano-Tests on Concrete Samples with and without Nanotubes";
    Vortrag: International Scientific Conference and the Meeting of the Scientific Council Department of Building Sciences - Russian Academy of Architecture and Building Sciences, Voronezh, Russia (eingeladen); 16.10.2013 - 18.10.2013.
  4. O. Lahayne:
    "The Experimental Investigation of Frictional Behaviour of Rubber Materials";
    Vortrag: 12th International Conference on Experimental Mechanics (ICEM12), Bari, Italy; 29.08.2004 - 02.09.2004.
  5. O. Lahayne, J. Eberhardsteiner, R. Reihsner:
    "Tribological Investigations Using a Linear Friction Tester (LFT)";
    Poster: 25th Danubia-Adria Symposium on Advances in Experimental Mechanics, Budweis and Krumlov; 24.09.2008 - 27.09.2008.
  6. O. Winter, S. Melchers, T. Uesebeck, O. Lahayne, Ch. Hellmich, H. Eckert, D. Eder:
    "Effect of Aluminium and Boron Incorporation on Structure, Bioactivity and Mechanical Properties of Ordered Mesoporous Bioactive Glasses";
    Poster: 3rd Edition Smart Materials and Surfaces - SMS - Conference and Exhibition (SMS Europe 2017), Paris; 26.04.2017 - 28.04.2017.
  7. L. Zelaya-Lainez, G. Balduzzi, O. Lahayne, Ch. Hellmich:
    "Micromechanics of Non-Embedded Spruce Wood: Novel Polishing and Indentation Protocol";
    Poster: 36th Danubia-Adria Symposium on Advanced in Experimental Mechanics, Plzen, Czech Republic; 24.09.2019 - 27.09.2019.

Dissertationen (eigene und begutachtete)

  1. O. Lahayne:
    "Experimentelle Reibungsuntersuchungen und Modellrechnungen zum Verhalten von Reifenmaterialien";
    Betreuer/in(nen), Begutachter/in(nen): J. Eberhardsteiner, K. Hoffmann; Institut für Mechanik der Werkstoffe und Strukturen, 2007; Rigorosum: 21.08.2007.

Diplom- und Master-Arbeiten (eigene und betreute)

  1. C. Pamer:
    "Simulation und Validierung der Thermodynamik der Eisreibung von Gummi";
    Betreuer/in(nen): R. Mundl, O. Lahayne; Institut für Mechanik und Mechatronik, 2010; Abschlussprüfung: 04/2010.

Wissenschaftliche Berichte

  1. Ch. Hellmich, A. Fritsch, O. Lahayne, A. Dejaco, M. Pöll, J. Dyson, V. Calbucci, G. Albertini, C. Kober, W. Swieszkowski, J. Jaroszewicz, P. Young, J. Hostens, P. Salmons, C. Müller, V. Komlev:
    "Full Risk Analysis of BIO-CT-EXPLOIT Project Based on Crucial Checking Points";
    Bericht für Project BIO-CT-EXPLOIT #232164, EC Call FP7-SME-2008-1, Deliverable Report D1.3; 2010; 13 S.
  2. Ch. Hellmich, A. Fritsch, O. Lahayne, A. Dejaco, M. Pöll, F. Rustichelli, J. Dyson, V. Calbucci, G. Albertini, C. Kober, W. Swieszkowski, J. Jaroszewicz, P. Young, J. Hostens, P. Salmons, C. Müller, V. Komlev:
    "Midterm Report";
    Bericht für Project of Theme FP7-SME-2008-1, sponsored by the European Commission; 2010; 32 S.
  3. Ch. Hellmich, A. Fritsch, O. Lahayne, A. Dejaco, M. Pöll, F. Rustichelli, J. Dyson, V. Calbucci, G. Albertini, C. Kober, W. Szwieszkowski, J. Jaroszewicz, T. Brynk, P. Young, J. Hostens, P. Salmon, E. Bongaers, C. Müller, A. Volf, V. Komlev:
    "Midterm Report, including Risk Assessment Reports, Deliverable Report";
    Bericht für Project BIO-CT-EXPLOIT #232164, EC Call FP7-SME-2008-1, Deliverable Report D1.4; 2011; 38 S.
  4. O. Lahayne, B. Pichler, J. Eberhardsteiner:
    "Technology Research for Winter Performance Improvement - Activities 2012: Preparation of Snow Surfaces for Indoor Friction Test, Representative for Field Experiments with Tires";
    Bericht für Final Report of the Research Project for Hankook Tire Co., Ltd.; 2013; 44 S.
  5. O. Lahayne, R. Reihsner, B. Pichler, J. Eberhardsteiner:
    "Technology Research for Winter Performance Improvement - Activities 2013/2014: From LFT-Testing for Creation of a Comprehensive Friction Coefficient Database, via Roughness Characterisation of Different Ice Surfaces, to the Development of a Generalised Friction Law";
    Bericht für Final Report for the Second Year of the Research Project for Hankook Tire Co., Ltd.; 2014; 58 S.
  6. K. Luczynski, Ch. Hellmich, O. Lahayne, R. Reihsner, W. Swieszkowski, J. Jaroszewicz, T. Brynk, B. Ostrowska:
    "Mechanical Characterization of Ceramic-Polymer-Based/Rapid-prototyped Biomaterials, Produced by WUT";
    Bericht für Project BIO-CT-EXPLOIT #232164, EC Call FP7-SME-2008-1, Deliverable Report D6.2; 2011; 21 S.