TU Home
Diese Publikationsliste wurde automatisch aus den Publikationsdaten der Fakultät für Bauingenieurwesen erstellt. Wenn Sie komplexere Suchabfragen vornehmen wollen, rufen Sie bitte die Seite "Publikationen der Fakultät" direkt auf, oder verwenden Sie die globale Suchfunktion der Publikationsdatenbank der Technischen Universität Wien!


Publikationsdatenbank Home  

Publikationsliste für
Josef Füssl
E202 - Institut für Mechanik der Werkstoffe und Strukturen
als Autorin / Autor bzw. wesentlich beteiligte Person

249 Datensätze (2006 - 2022)


Bücher und Buch-Herausgaben


  1. E. Aigner, R. Blab, J. Eberhardsteiner, J. Füssl, E. Hauser, M. Hoffmann, B. Hofko, A. Jäger, K. Kappl, R. Lackner, M. Spiegl, K. Stangl, M. Wagner, M. Wistuba (Hrg.):
    "Funktionale Charakterisierung von Asphalt - Von den wissenschaftlichen Grundlagen zur baupraktischen Anwendung";
    Professur für Straßen- und Flugbetriebsflächenbau, Wien, 2009, ISBN: 9783901912221; 100 S.

  2. R. Blab, J. Füssl, B. Gagliano, T. Hessmann, W. Kluger-Eigl:
    "Beiträge zur Weiterentwicklung von Pflasterbefestigungen";
    in Buchreihe "Mitteilungen des Instituts für Verkehrswissenschaften", Buchreihen-Herausgeber: R. Blab; Institut für Verkehrswissenschaften - Forschungsbereich Straßenwesen - Technische Universität Wien, Wien, 2013, ISBN: 978-3-901912-29-0, 211 S.

  3. J. Füssl:
    "Multiscale Fracture Modeling of Bituminous Mixtures - From Fatique Behavior to Ultimate Strength Properties of Asphalt Concrete";
    in Buchreihe "Mitteilungen der Professur für Straßen- und Flugbetriebsflächenbau, TU Wien", Buchreihen-Herausgeber: R. Blab, J. Eberhardsteiner; Institut für Verkehrswissenschaften, Forschungsbereich für Verkehrsplanung und Verkehrstechnik, Technische Universität Wien, Wien, 2011, ISBN: 978-3-901912-26-9, 119 S.


Zeitschriftenartikel


  1. M. Autengruber, M. Lukacevic, J. Füssl:
    "Finite-Element-Based Moisture Transport Model for Wood Including Free Water Above the Fiber Saturation Point";
    International Journal of Heat and Mass Transfer, 161 (2020), 120228.

  2. M. Autengruber, M. Lukacevic, C. Gröstlinger, J. Eberhardsteiner, J. Füssl:
    "Numerical Assessment of Wood Moisture Content-Based Assignments to Service Classes in EC5 and a Prediction Concept of Moisture-Induced Stresses Solely Using Relative Humidity Data";
    Engineering Structures, 245 (2021), 112849.

  3. M. Autengruber, M. Lukacevic, C. Gröstlinger, J. Füssl:
    "Finite-Element-Based Prediction of Moisture-Induced Crack Patterns for Cross Sections of Solid Wood and Glued Laminated Ttmber Exposed to a Realistic Climate Condition";
    Construction and Building Materials, 271 (2021), 121775.

  4. M. Autengruber, M. Lukacevic, G. Wenighofer, R. Mauritz, J. Füssl:
    "Finite-element-based concept to predict stiffness, strength, and failure of wood composite I-joist beams under various loads and climatic conditions";
    Engineering Structures, 245 (2021), 112908; S. 1 - 22.

  5. G. Balduzzi, M. Aminbaghai, F. Auricchio, J. Füssl:
    "Planar Timoshenko-Like Model for Multilayer Non-Prismatic Beams";
    International Journal of Mechanics and Materials in Design, 14 (2018), S. 51 - 70.

  6. G. Balduzzi, M. Aminbaghai, E. Sacco, J. Füssl, J. Eberhardsteiner, F. Auricchio:
    "Non-Prismatic Beams: a Simple and Effective Timoshenko-Like Model";
    International Journal of Solids and Structures, 90 (2016), S. 236 - 250.

  7. G. Balduzzi, G. Hochreiner, J. Füssl:
    "Stress Recovery from One Dimensional Models for Tapered Bi-Symmetric Thin-Walled I Beams: Deficiencies in Modern Engineering Tools and Procedures";
    Thin-Walled Structures, 119 (2017), S. 934 - 945.

  8. G. Balduzzi, G. Hochreiner, J. Füssl, F. Auricchio:
    "Serviceability Analysis of Non-Prismatic Timber Beams: Derivation and Validation of New and Effective Straightforward Formulas";
    Open Journal of Civil Engineering, 7 (2017), S. 32 - 62.

  9. G. Balduzzi, S. Morganti, J. Füssl, M. Aminbaghai, A. Reali, F. Auricchio:
    "Modeling the Non-Trival Behavior of Anisotropic Beams: A Simple Timoshenko Beam with Enhanced Stress Recovery and Constitutive Relations";
    Composite Structures, 229 (2019), S. 111265.

  10. T. Buchner, T. Kiefer, W. Gaggl, L. Zelaya-Lainez, J. Füssl:
    "Automated Morphometrical Characterization of Material Phases of Fired Clay Bricks Based on Scanning Electron Microscopy, Energy Dispersive X-Ray Spectroscopy and Powder X-Ray Diffraction";
    Construction and Building Materials, 288 (2021), 122909; S. 1 - 13.

  11. T. Buchner, T. Kiefer, M. Königsberger, A. Jäger, J. Füssl:
    "Continuum micromechanics model for fired clay bricks: Upscaling of experimentally identified microstructural features to macroscopic elastic stiffness and thermal conductivity";
    Materials & Design, 212 (2021), 110212.

  12. T. Buchner, T. Kiefer, L. Zelaya-Lainez, W. Gaggl, T. Konegger, J. Füssl:
    "A Multitechnique, Quantitative Characterization of the Pore Space of Fired Bricks Made of Five Clayey Raw Materials Used in European Brick Industry";
    Applied Clay Sciences, 200 (2021), S. 1 - 16.

  13. L. Eberhardsteiner, J. Füssl, B. Hofko, F. Handle, M. Hospodka, R. Blab, H. Grothe:
    "Influence of asphaltene content on mechanical bitumen behavior - Experimental investigation and micromechanical modeling";
    Materials and Structures, 48 (2015), 10; S. 3099 - 3112.

  14. L. Eberhardsteiner, J. Füssl, B. Hofko, F. Handle, M. Hospodka, R. Blab, H. Grothe:
    "Towards a microstructural model of bitumen aging behavior";
    International Journal of pavement engineering, 16 (2015), S. 939 - 949.

  15. J. Füssl:
    "Mehrskalenmodellierung zur Beschreibung des Ermüdungsverhaltens von Asphalt";
    GESTRATA Journal, 134 (2012), S. 38 - 41.

  16. J. Füssl, T. Bader, J. Eberhardsteiner:
    "Computational Mechanics for Advanced Timber Engineering";
    IACM Expressions, 32 (2012), S. 6 - 11.

  17. J. Füssl, H. Hengl, L. Eberhardsteiner, W. Kluger-Eigl:
    "Numerical Simulation Tool for Paving Block Structures Assessed by Means of Full-Scale Accelerated Pavement Tests";
    International Journal of pavement engineering, (2016), 13 S.

  18. J. Füssl, G. Kandler, J. Eberhardsteiner:
    "Application of Stochastic Finite Approaches to Wood-Based Products";
    Archive of Applied Mechanics, 86 (2016), S. 89 - 110.

  19. J. Füssl, W. Kluger-Eigl, R. Blab:
    "Experimental Identification and Mechanical Interpretation of the Interaction Behavior between Concrete Paving Blocks";
    International Journal of pavement engineering, 17 (2016), S. 478 - 488.

  20. J. Füssl, W. Kluger-Eigl, R. Blab:
    "Mechanical Performance of Pavement Structures with Paving Slabs - Part I: Full-Scale Accelerated Tests as Validation for a Numerical Simulation Tool";
    Engineering Structures, 98 (2015), S. 212 - 220.

  21. J. Füssl, W. Kluger-Eigl, L. Eberhardsteiner, R. Blab:
    "Mechanical Performance of Pavement Structures with Paving Slabs - Part II: Numerical Simulation Tool Validated by Means of Full-Scale Accelerated Tests";
    Engineering Structures, 98 (2015), S. 221 - 229.

  22. J. Füssl, R. Lackner:
    "Multiscale Fatique Model for Bituminous Mixtures";
    International Journal of Fatigue, 33 (2011), 11; S. 1435 - 1450.

  23. J. Füssl, R. Lackner, J. Eberhardsteiner:
    "Creep Response of Bituminous Mixtures - Rheological Model and Microstructural Interpretation";
    Meccanica, 49 (2014), S. 2687 - 2698.

  24. J. Füssl, R. Lackner, J. Eberhardsteiner, H.A. Mang:
    "Failure Modes and Effective Strength of Two-Phase Materials Determined by Means of Numerical Limit Analysis";
    Acta Mechanica, 195 (2008), 1-4; S. 185 - 202.

  25. J. Füssl, M. Li, M. Lukacevic, J. Eberhardsteiner, C. Martin:
    "Comparison of Unit Cell-Based Computational Methods for Predicting the Strength of Wood";
    Engineering Structures, 141 (2017), S. 427 - 443.

  26. J. Füssl, M. Lukacevic, G. Kandler, J. Eberhardsteiner:
    "A Comprehensive Mechanical Modeling Approach for the Design of Wood-based Products";
    IACM Expressions, 35 (2014), S. 8 - 12.

  27. F. Handle, J. Füssl, S. Neudl, D. Großegger, L. Eberhardsteiner, B. Hofko, R. Blab, H. Grothe:
    "The bitumen microstructure: a fluorescent approach";
    Materials and Structures, 49 (2016), S. 167 - 180.

  28. F. Handle, M. Harir, J. Füssl, A. Koyun, D. Großegger, N. Hertkorn, L. Eberhardsteiner, B. Hofko, M. Hospodka, R. Blab, P. Schmitt-Kopplin, H. Grothe:
    "Tracking Aging of Bitumen and Its Saturate, Aromatic, Resin, and Asphaltene Fractions Using High-Field Fourier Transform Ion Cyclotron Resonance Mass Spectrometry";
    Energy & Fuels, 31 (2017), 5; S. 4771 - 4779.

  29. H. Hengl, J. Füssl:
    "The Influence of Superelevated Profiles of Paving Block Structures on their Load-Bearing Behavior";
    Engineering Structures, 117 (2016), S. 195 - 203.

  30. H. Hengl, W. Kluger-Eigl, R. Blab, J. Füssl:
    "The Performance of Paving Block Structures with Mortar Filled Joints under Temperature Loading, Accessed by Means of Numerical Simulations";
    Road Materials and Pavement Design, (2017), 20 S.

  31. H. Hengl, W. Kluger-Eigl, R. Blab, J. Füssl:
    "Ther Performance of Paving Block Structures with Mortar Filled Joints Under Temperature Loading, Accessed by Means of Numerical Simulations";
    Road Materials and Pavement Design, 19 (2018), S. 1575 - 1594.

  32. H. Hengl, W. Kluger-Eigl, M. Lukacevic, R. Blab, J. Füssl:
    "Horizontal Deformation Resistance of Paving Block Superstructures - Influence of Paving Block Type, Laying Pattern, and Joint Behaviour";
    International Journal of Pavement Research and Technology, 11 (2018), S. 846 - 860.

  33. G. Hochreiner, J. Füssl, J. Eberhardsteiner:
    "Cross-Laminated Timber Plates Subjected to Concentrated Loading - Experimental Identification of Failure Mechanisms";
    Strain, 50 (2014), S. 68 - 81.

  34. G. Hochreiner, J. Füssl, E. Serrano, J. Eberhardsteiner:
    "Influence of Wooden Board Strength Class on the Performance of Cross-Laminated Timber Plates Investigated by Means of Full-Field Deformation Measurements";
    Strain, 50 (2014), S. 161 - 173.

  35. B. Hofko, R. Blab, L. Eberhardsteiner, J. Füssl, H. Grothe, F. Handle, M. Hospodka, D. Großegger, S. Nahar, A. Schmets, T. Scarpas:
    "Microstructure and rheology of bitumen";
    Rassegna del Bitume (eingeladen), 79 (2015), S. 25 - 30.

  36. B. Hofko, L. Eberhardsteiner, J. Füssl, H. Grothe, F. Handle, M. Hospodka, D. Großegger, S. Nahar, A. Schmets, T. Scarpas:
    "Impact of maltene and asphaltene fraction on mechanical behavior and microstructure of bitumen";
    Materials and Structures, 49 (2016), 3; S. 829 - 841.

  37. B. Hofko, F. Handle, L. Eberhardsteiner, M. Hospodka, R. Blab, J. Füssl, H. Grothe:
    "Alternative Approach Toward the Aging of Asphalt Binder";
    Transportation Research Record (eingeladen), 2505 (2015), 2505; S. 24 - 31.

  38. B. Hofko, M. Hospodka, L. Eberhardsteiner, R. Blab, J. Füssl, H. Grothe, F. Handle, D. Großegger:
    "Aktuelle Erkenntnisse zum Alterungsverhalten von Bitumen und Asphalt";
    Straße und Autobahn (eingeladen), 8 (2014), S. 591 - 597.

  39. G. Kandler, J. Füssl:
    "A Probabilistic Approach for the Linear Behaviour of Glued Laminated Timber";
    Engineering Structures, 148 (2017), S. 673 - 685.

  40. G. Kandler, J. Füssl, J. Eberhardsteiner:
    "Stochastic Finite Element Approaches for Wood-Based Products: Theoretical Framework and Review of Methods";
    Wood Science and Technology, 49 (2015), S. 1055 - 1097.

  41. G. Kandler, J. Füssl, E. Serrano, J. Eberhardsteiner:
    "Effective Stiffness Prediction of GLT Beams Based on Stiffness Distributions of Individual Lamellas";
    Wood Science and Technology, 49 (2015), S. 1101 - 1121.

  42. G. Kandler, M. Lukacevic, J. Füssl:
    "An Algorithm for the Geometric Reconstruction of Knots within Timber Boards Based on Fibre Angle Measurements";
    Construction and Building Materials, 124 (2016), S. 945 - 960.

  43. G. Kandler, M. Lukacevic, J. Füssl:
    "Ein Algorithmus zur Rekonstruktion von 3D Astgeometrien und die Einbettung dieser Information in stochastische Konzepte für Brettschichtholz";
    ÖIAZ - Österreichische Ingenieur- und Architektenzeitschrift, 162 (2017), S. 105 - 112.

  44. G. Kandler, M. Lukacevic, J. Füssl:
    "Experimental Study on Glued Laminated Timber Beams with Well-Known Knot Morphology";
    European Journal of Wood and Wood Products, 76 (2018), S. 1435 - 1452.

  45. G. Kandler, M. Lukacevic, S. Wolff, J. Füssl:
    "Stochastic Engineering Framework for Timber Structural Elements";
    Beton- und Stahlbetonbau, 113 (2018), S. 96 - 102.

  46. G. Kandler, M. Lukacevic, C. Zechmeister, S. Wolff, J. Füssl:
    "Stochastic Engineering Framework for Timber Structural Elements and Its Application to Glued Laminated Timber Beams";
    Construction and Building Materials, 190 (2018), S. 573 - 592.

  47. H. Kariem, J. Füssl, T. Kiefer, A. Jäger, Ch. Hellmich:
    "The Viscoelastic Behavior of Material Phases in Fired Clay Identified by Means of Grid Nanoindentation";
    Construction and Building Materials, 231 (2020), 117066; S. 1 - 23.

  48. H. Kariem, Ch. Hellmich, T. Kiefer, A. Jäger, J. Füssl:
    "Micro-CT-Based Identifiation of Double Porosity in Fired Clay Ceramics with Different Poreforming Agents in Various Concentrations";
    Journal of Materials Science, 53 (2018), S. 9411 - 9428.

  49. H. Kariem, T. Kiefer, Ch. Hellmich, W. Gaggl, A. Steiger-Thirsfeld, J. Füssl:
    "EDX/XRD-Based Identification of Micrometer-Sized Domains in Scanning Electron Micrographs of Fired Clay";
    Materials and Structures, 53 (2020), 109.

  50. T. Kiefer, J. Füssl, H. Kariem, J. Konnerth, W. Gaggl, Ch. Hellmich:
    "A Multi-Scale Material Model for the Estimation of the Transversely Isotropic Thermal Conductivity Tensor of Fired Clay Bricks";
    Journal of the European Ceramic Society, 40 (2020), S. 6200 - 6217.

  51. T. Kiefer, H. Kariem, M. Lukacevic, J. Füssl:
    "The Compressive Strength of Vertically Perforated Clay Block Masonry Predicted by Means of a Unit-Cell Type Numerical Simulation Tool Taking Discrete Cracking into Account";
    Construction and Building Materials, 150 (2017), S. 24 - 34.

  52. O. Lahayne, L. Zelaya-Lainez, T. Buchner, J. Eberhardsteiner, J. Füssl:
    "Influence of Nanoadditives on the Young's Modulus of Cement";
    Materials Today: Proceedings, 62 (2022), S. 2488 - 2494.

  53. M. Li, J. Füssl, M. Lukacevic, J. Eberhardsteiner, C. Martin:
    "A Numerical Upper Bound Formulation with Sensibly-Arranged Velocity Discontinuities and Orthotropic Material Strength Behaviour";
    Journal of Theoretical and Applied Mechanics, 56 (2018), 2; S. 417 - 433.

  54. M. Li, J. Füssl, M. Lukacevic, J. Eberhardsteiner, C. Martin:
    "An Algorithm for Adaptive Introduction and Arrangement of Velocity Discontinuities within 3D Finite-Element-Based Upper Bound Limit Analysis Approaches";
    Computer Methods in Applied Mechanics and Engineering, 348 (2019), S. 875 - 911.

  55. M. Li, J. Füssl, M. Lukacevic, J. Eberhardsteiner, C. Martin:
    "Strength Predictions of Clear Wood at Multiple Scales Using Numerical Limit Analysis Approaches";
    Computers and Structures, 196 (2018), S. 200 - 216.

  56. M. Li, J. Füssl, M. Lukacevic, C. Martin, J. Eberhardsteiner:
    "Bending Strength Predictions of Cross-Laminated Timber Plates Subjected to Concentrated Loading Using 3D Finite-Element-Based Limit Analysis Approaches";
    Composite Structures, 220 (2019), S. 912 - 925.

  57. M. Lukacevic, M. Autengruber, T. Raimer, J. Eberhardsteiner, J. Füssl:
    "Effect of Cast-In-Place Concrete Application on Moisture Distribution in Timber-Concrete Composite Floors with Notched Connections, Investigated Via Finite Element Simulations";
    Journal of Building Engineering, 42 (2021), 103005.

  58. M. Lukacevic, J. Füssl:
    "Application of a Multisurface Discrete Crack Model for Clear Wood Taking into Account the Inherent Microstructural Characteristics of Wood Cells";
    Holzforschung, 70 (2016), 9; S. 845 - 853.

  59. M. Lukacevic, J. Füssl:
    "Numerical Simulation Tool for Wooden boards with a Physically Based Approach to Identify Structural Failure";
    European Journal of Wood and Wood Products, 72 (2014), 4; S. 497 - 508.

  60. M. Lukacevic, J. Füssl, J. Eberhardsteiner:
    "Discussion of Common and New Indicating Properties for the Strength grading of Wooden Boards";
    Wood Science and Technology, 49 (2015), S. 551 - 576.

  61. M. Lukacevic, J. Füssl, J. Eberhardsteiner:
    "Eine numerische Methode zur Beschreibung von Holzversagen - von der Holzzelle bis zu Holzprodukten";
    ÖIAZ - Österreichische Ingenieur- und Architektenzeitschrift, 162 (2017), S. 17 - 24.

  62. M. Lukacevic, J. Füssl, M. Griessner, J. Eberhardsteiner:
    "Performance Assessment of a Numerical Simulation Tool for Wooden Boards with Knots by Means of Full-Field Deformation Measurements";
    Strain, 50 (2014), S. 301 - 317.

  63. M. Lukacevic, J. Füssl, R. Lampert:
    "Failure Mechanisms of Clear Wood Identified at Wood Cell Level by an Approach Based on the Extended Finite Element Method";
    Engineering Fracture Mechanics, 144 (2015), S. 158 - 175.

  64. M. Lukacevic, G. Kandler, M. Hu, A. Olsson, J. Füssl:
    "A 3D Model for Knots and Related Fiber Deviations in Sawn Timber for Prediction of Mechanical Properties of Boards";
    Materials & Design, 166 (2019), S. 107617.

  65. M. Lukacevic, W. Lederer, J. Füssl:
    "A Microstructure-Based Multisurface Failure Criterion for the Description of Brittle and Ductile Failure Mechanisms of Clear-Wood";
    Engineering Fracture Mechanics, 176 (2017), S. 83 - 99.

  66. H.A. Mang, B. Pichler, T. Bader, J. Füssl, X. Jia, A. Fritsch, J. Eberhardsteiner, Ch. Hellmich:
    "Quantification of Structural and Material Failure Mechanisms across different Length Scales: From Instability to Brittle-Ductile Transitions";
    Acta Mechanica, 223 (2012), S. 1937 - 1957.

  67. S. Pech, G. Kandler, M. Lukacevic, J. Füssl:
    "Metamodel Assisted Optimization of Glued Laminated Timber Beams by Using Metaheuristic Algorithms";
    Engineering Applications of Artificial Intelligence, 79 (2019), S. 129 - 141.

  68. S. Pech, M. Lukacevic, J. Füssl:
    "A Hybrid Multi-Phase Field Model to Describe Cohesive Failure in Orthotropic Materials, Assessed by Modeling Failure Mechanisms in Wood";
    Engineering Fracture Mechanics, 271 (2022), 108591; S. 1 - 19.

  69. S. Pech, M. Lukacevic, J. Füssl:
    "A Robust Multisurface Return-Mapping Algorithm and Its Implementation in Abaqus";
    Finite Elements in Analysis and Design, 190 (2021), 103531; S. 1 - 9.

  70. D. Steiner, B. Hofko, M. Hospodka, F. Handle, H. Grothe, J. Füssl, L. Eberhardsteiner, R. Blab:
    "Towards an optimised lab procedure for long-term oxidative ageing of asphalt mix specimen";
    International Journal of pavement engineering, 17 (2016), S. 471 - 477.

  71. V. Stembera, J. Füssl:
    "DKMQ24 Shell Element with Improved Membrane Behaviour";
    Finite Elements in Analysis and Design, 175 (2020).

  72. R. Suda, T. Kiefer, Ch. Schranz, J. Füssl:
    "A Finite-Element-Based Approach to Quantify the Impact of Bed Joint Reinforcement on the Compressive Strength of Vertically Perforated Clay Block Masonry";
    Engineering Structures, 239 (2021), 112277.

  73. C. Vida, M. Lukacevic, J. Eberhardsteiner, J. Füssl:
    "Modeling Approach to Estimate the Bending Strength and Failure Mechanisms of Glued Laminated Timber Beams";
    Engineering Structures, 255 (2022), 113862.


Buchbeiträge


  1. J. Füssl:
    "Prognose der Ermüdungs- und Festigkeitseigenschaften von Asphalt";
    in: "Funktionale Charakterisierung von Asphalt - Von den wissenschaftlichen Grundlagen zur baupraktischen Anwendung", Professur für Straßen- und Flugbetriebsflächenbau, Wien, 2009, (eingeladen), ISBN: 9783901912221, S. 75 - 80.

  2. J. Füssl, R. Lackner:
    ""Homogenization of Strength" - A Numerical Limit Analysis Approach";
    in: "Computational Methods in Applied Sciences, ECCOMAS, New Computational Challenges in Materials, Structures, and Fluids", Springer Verlag, 2009, ISBN: 978-1-4020-9230-5, S. 183 - 201.

  3. J. Füssl, M. Lukacevic, S. Pillwein, H. Pottmann:
    "Computational Mechanical Modelling of Wood - From Microstructural Characteristics Over Wood-Based Products to Advanced Timber Structures";
    in: "Digital Wood Design, Lecture Notes in Civil Engineering", Springer, Cham, 2019, ISBN: 978-3-030-03675-1, S. 639 - 673.

  4. G. Hochreiner, J. Füssl, J. Eberhardsteiner, S. Aicher:
    "CLT Plates under Concentrated Loading - Experimental Identification of Crack Modes and Corresponding Failure Mechanismus";
    in: "Materials and Joints in Timber Structures - Recent Developments of Technology", Springer Verlag, Dordrecht, 2014, ISBN: 978-94-007-7810-8, S. 703 - 712.


Beiträge in Tagungsbänden


  1. M. Autengruber, M. Lukacevic, J. Eberhardsteiner, J. Füssl:
    "A Numerical Simulation Tool for Coupled Heat and Mass Transfer in Wood";
    in: "Programme & Book of Abstracts on Computational Methods in Wood Mechanics - from Material Properties to Timber Structures (CompWood 2017)", TU Verlag, Wien, 2017, ISBN: 978-3-903024-49-6, S. 62.

  2. M. Autengruber, M. Lukacevic, J. Eberhardsteiner, J. Füssl:
    "A Numerical Simulation Tool for Coupled Heat and Mass Transfer in Wood";
    in: "Book of Abstracts of the XXI. St. Inter-Institute Seminar for Young Researchers", Department of Structural Mechanics, Budapest University of Technology and Economics, 2017, S. 6.

  3. M. Autengruber, M. Lukacevic, J. Füssl:
    "Heat and Mass Transfer Model for Wood Under Real Climate Conditions";
    in: "Book of Abstracts of the International Conference on Computational Methods in Wood Mechanics - from Material Properties to Timber Structures (CompWood 2019)", Linnaeus University, 2019, ISBN: 978-91-88898-64-7.

  4. G. Balduzzi, M. Aminbaghai, J. Füssl:
    "Linear Response of a Planar FGM Beam with Non-Linear Variation of the Mechanical Properties";
    in: "Proceedings of the 8th ECCOMAS Thematic Conference on Smart Structures and Materials (SMART 2017)", International Center for Numerical Methods in Engineering (CIMNE), 2017, S. 1285 - 1294.

  5. G. Balduzzi, J. Füssl, F. Auricchio, E. Sacco:
    "Remarks on the Shear Stress Distribution within the Beam Cross-Section in Non-Linear Regime";
    in: "Proceedings of the 6th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2017)", National Technical University of Athens, 2017.

  6. G. Balduzzi, G. Hochreiner, J. Füssl, F. Auricchio:
    "Performance Evaluation of New Straightforward Formulas for the Serviceability Analysis of Cambered Timber Beams";
    in: "CD-ROM Proceedings of the World Conference on Timber Engineering (WCTE 2016)", J. Eberhardsteiner, W. Winter, A. Fadai, M. Pöll (Hrg.); herausgegeben von: Vienna University of Technology; Grafisches Zentrum HTU GmbH, Vienna, 2016, ISBN: 978-3-903039-00-1, Paper-Nr. 821, 8 S.

  7. G. Balduzzi, G. Hochreiner, E. Sacco, F. Auricchio, J. Füssl:
    "Remarks on the Effectiveness of Stress-Distribution Recovery Formulas for Mono-Symmetric Thin Walled Beams";
    in: "Proceedings of the XXVI Giornate Italiane della Costruzione in Acciaio", Collegio Dei Tecnici dell'Acciaio, 2017.

  8. G. Balduzzi, G. Kandler, J. Füssl:
    "Estimation of GLT Beam Stiffness Based on Homogenized Board Mechanical Properties and Composite Beam Theory";
    in: "Proceedings of the 6th European Conference on Computational Mechanics (ECCM6-ECFD7)", The University of Glasgow and The University of Edinburgh, 2018, 12 S.

  9. G. Balduzzi, G. Kandler, J. Füssl:
    "Estimation of the Bending Stiffness of GLT Beams: A Novel Procedure Based on Enhanced Analysis of the Boards' Stiffness and First Order Beam Models";
    in: "Programme & Book of Abstracts on Computational Methods in Wood Mechanics - from Material Properties to Timber Structures (CompWood 2017)", TU Verlag, Wien, 2017, ISBN: 978-3-903024-49-6, S. 93.

  10. G. Balduzzi, S. Morganti, J. Füssl, M. Aminbaghai, A. Reali, F. Auricchio:
    "A Multilayer Anisotropic Beam Model Based on Timoshenko Kinematics, Enhanced Stress Recovery, and Effective Constitutive Relations";
    in: "Book of Abstracts of the 5th ECCOMAS Young Investigators Concerence (YIC 2019)", AKNET-Press, 2019, S. 189 - 190.

  11. G. Balduzzi, S. Morganti, J. Füssl, M. Aminbaghai, A. Reali, F. Auricchio:
    "Evidences of the Non-Negligible Effects of the Orientation of Material Principal Directions on the Structural Response of a Planar Anisotropic Beam";
    in: "Book of Abstracts of the 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019)", TU Verlag, 2019, ISBN: 978-3-903024-84-7, S. 183 - 184.

  12. G. Balduzzi, S. Morganti, J. Füssl, M. Aminbaghai, A. Reali, F. Auricchio:
    "Timoshenko Beam with Enhanced Stress Recovery and Constitutive Relations Describing the Effects of Variable Grain Direction on the Behavior of a GLT Beam";
    in: "Book of Abstracts of the International Conference on Computational Methods in Wood Mechanics - From Material Properties to Timber Structures", Linnaeus University, 2019, ISBN: 978-91-88898-64-7, S. 75.

  13. G. Balduzzi, S. Morganti, J. Füssl, A. Reali, F. Auricchio:
    "Anisotropic Beams with Variable Fiber Directions: Analystical Modeling and Isogeometric Collocation";
    in: "Book of Abstracts of the 14th World Congress in Computational Mechanics and ECCOMAS Congress (virtual)", International Center for Numerical Methods in Engineering (CIMNE), 2021, 1 S.

  14. G. Balduzzi, S. Morganti, J. Füssl, A. Reali, F. Auricchio:
    "Beams with Variable Mechanical Properties: Planar Timoshenko-like Model and Numerical Solution Via Iso-Geometric Collocation";
    in: "Book of Abstracts of the 13th World Congress in Computational Mechanics (WCCM 2018)", International Association for Computational Mechanics (IACM), 2018, 1 S.

  15. G. Balduzzi, S. Morganti, E. Sacco, F. Auricchio, J. Füssl, A. Reali:
    "Multilayer Beam Model: Numerical Solution Via Isogeometric Collocation Method";
    in: "Abstracts and Programme of the 6th ECCOMAS Thematic Conference on the Mechanical Response of Composites (COMPOSITES 2017)", Eindhoven University of Technology, 2017, ISBN: 978-90-386-4366-3, Paper-Nr. 65, 1 S.

  16. G. Balduzzi, E. Sacco, F. Auricchio, J. Füssl:
    "Non-Prismatic Thin-Walled Beams: Critical Issues and Effective Modeling";
    in: "Proceedings of the XXIII Conference of the Italian Association of Theoretical and Applied Mechanics", Universita' Degli Studi di Salerno, 2017, ISBN: 978-889-42484-7-0, S. 301 - 308.

  17. G. Balduzzi, E. Sacco, F. Auricchio, J. Füssl:
    "Tapered Mono-Symmetri Thin Walled Beams: Critial Issues in the Evaluation of Cross-Section Resistance";
    in: "Proceedings of the 10th European Solid Mechanics Conference (ESMC 2018)", European Mechanics Society (EUROMECH), 2018, Paper-Nr. 1300, 1 S.

  18. F. Brandstätter, M. Autengruber, M. Lukacevic, J. Füssl:
    "Numerical Simulation of Moisture-Induced Cracking in Wood exposed to Indoor Climate Conditions";
    in: "Proceedings of the 8th European Concress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2022)", International Center for Numerical Methods in Engineering (CIMNE), 2022, Paper-Nr. 536, 1 S.

  19. T. Buchner, T. Kiefer, M. Königsberger, A. Jäger, J. Füssl:
    "A Multiscale Model for Fired Clay Brick Masonry: Upscaling of Experimentally Identified Microstructural Features to Macroscopic Elastic Stiffness and Thermal Conductivity";
    in: "Programme & Book of Abstracts of the International Symposium on Interdisciplinary Research in Civil Engineering Sciences (IS-IRCES)", Technische Universität Wien, 2021, S. 19.

  20. T. Buchner, T. Kiefer, L. Zelaya-Lainez, W. Gaggl, J. Füssl:
    "A Multitechnique Characterization and Quantification of the Microstructures of Bricks Made of Different Clayey Raw Materials";
    in: "Book of Abstracts of the 37th Danubia Adria Symposium on Advances in Experimental Mechanics", Johannes Kepler University, 2021, ISBN: 978-3-9504997-0-4, S. 45 - 46.

  21. T. Buchner, T. Kiefer, L. Zelaya-Lainez, W. Gaggl, J. Füssl:
    "A Multitechnique, Quantitative Characterization of the Microstructure of Fired Clay Bricks";
    in: "Abstracts of the 17th International Brick and Block Masonry Online-Conference: From Historical to Sustainable Masonry", Silesian University of Technology, Cracow University of Technology, Wroclaw University of Technology, 2020, Paper-Nr. Paper-ID: 265, 1 S.

  22. J. Eberhardsteiner, J. Füssl, R. Lackner:
    "Multiscale Prediction of Strength Properties of Asphalt by means of Limit Analysis";
    in: "9th US National Congress on Computational Mechanics (USNCCM 9)", USACM, 2007, (eingeladen), 1 S.

  23. J. Füssl, E. Aigner, R. Lackner, H.A. Mang:
    "Upscaling of Viscoelastic and Strength Properties of Matrix-Inclusion Materials in the Framework of Multiscale Modeling";
    in: "Proceedings of APCOM'07-EPMESC XI", APACM/EPMESC, 2007, 14 S.

  24. J. Füssl, W. Kluger-Eigl, R. Blab:
    "Numerical Simulation Tool for Slab and Block Pavements Validated by Means of Large-Scale Accelerated Pavement Tests";
    in: "CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)", herausgegeben von: Vienna University of Technology; Vienna University of Technology, Wien, 2012, ISBN: 978-3-9502481-9-7, Paper-Nr. Nr. 3504, 2 S.

  25. J. Füssl, R. Lackner:
    "Limit Analysis Based Upscaling of Strength Properties and Investigation of Failure Modes of Two-Phase Materials";
    in: "CD-ROM Proceedings of the 8th World Congress on Computational Mechanics (WCCM 8) and the 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008)", CIMNE, 2008, ISBN: 978-84-96736-55-9, 2 S.

  26. J. Füssl, R. Lackner:
    "Limit-Analysis Based Identification of Fracture and Degradation Mechanisms in Two-Phase Composite Materials";
    in: "Proceedings (Extended Abstracts) of the 6th International Conference on Computation of Shell & Spatial Structures (IASS-IACM 2008)", USACM, 2008, 4 S.

  27. J. Füssl, R. Lackner:
    "Limit-Analysis Based Upscaling of Strength Properties of Matrix-Inclusion Materials";
    in: "Book of Abstracts, 16th Inter-Institute Seminar for Young Researchers", TU Wien, 2007, ISBN: 3-9501554-9-x, S. 27.

  28. J. Füssl, R. Lackner:
    "Limit-Analysis Based Upscaling of Strength Properties of Matrix-Inclusion Materials";
    in: "Proceedings of the International Conference on Advanced Characterisation of Pavement and Soil Engineering Materials", A. Loizos, T. Scarpas, I. Al-Quadi (Hrg.); Taylor & Francis/Balkema, AK Leiden, Netherlands, 2007, (eingeladen), ISBN: 978-0-415-44882-6, S. 1133 - 1144.

  29. J. Füssl, R. Lackner:
    "Micromechanical Model for the Description of Fatique Behavior of Asphalt Mixtures";
    in: "Proceedings of the IV European Conference on Computational Mechanics (ECCM 2010)", ECCOMAS, 2010.

  30. J. Füssl, R. Lackner:
    "Micromechanical Model for the Description of Fatique Behavior of Asphalt Mixtures";
    in: "Book of Abstracts of the 18th Inter-Institute Seminar", Department of Structural Mechanics, Budapest University of Technology and Economics, 2011, S. 22.

  31. J. Füssl, R. Lackner:
    "Microstructure-Based Failure Surfaces of Matrix-Inclusion Materials: The Origin of J3 Plasticity Highlighted by Limit Analysis";
    in: "Proceedings of the 6th International Conference on Fracture Mechanics of Concrete and Concrete Structures (FramCos-6)", P. Gambarova, G. Ferro, G. Plizzari (Hrg.); Taylor & Francis Group, 2007, ISBN: 978-0-415-44066-0, S. 403 - 410.

  32. J. Füssl, R. Lackner, J. Eberhardsteiner:
    "Effect of Deterioration Processes on Effective Strength of Concrete Highlighted by Means of Numerical Limit Analysis";
    in: "Proceedings of the Eleventh East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-11)", D & E Drawing and Editing Services Company, Taipei, Taiwan, 2008, (eingeladen), ISBN: 978-986-80222-4-9, S. 272 - 273.

  33. J. Füssl, R. Lackner, J. Eberhardsteiner:
    "Strength Properties of Composites Highlighted by Means of Numerical Limit Analysis";
    in: "Taiwan-Austria Joint Workshop on Computational Mechanics of Materials and Structures", National Taiwan University of Science and Technology, Taipei, Taiwan, 2008, (eingeladen), S. 31 - 32.

  34. J. Füssl, R. Lackner, H.A. Mang:
    ""Homogenization of Strength" - Determination of Effective Failure Criteria and Failure Modes of Composites Using Numerical Limit Analysis";
    in: "Proceedings of the 12th International Conference on Fracture", Natural Resources Canada, 2009, (eingeladen), 9 S.

  35. J. Füssl, M. Li, M. Lukacevic, J. Eberhardsteiner, C. Martin:
    "Three Different Methods for Predicting the Strength Behavior of Clear Wood - A Performance Comparison and Basis for a Combined Approach";
    in: "CD-ROM Proceedings of the World Conference on Timber Engineering (WCTE 2016)", J. Eberhardsteiner, W. Winter, A. Fadai, M. Pöll (Hrg.); herausgegeben von: Vienna University of Technology; Grafisches Zentrum HTU GmbH, Vienna, 2016, ISBN: 978-3-903039-00-1, Paper-Nr. 863, 10 S.

  36. J. Füssl, M. Lukacevic, G. Kandler, J. Eberhardsteiner:
    "A Comprehensive Mechanical Modeling Approach for the Optimization of Wood-Based Products";
    in: "Proceedings of the EUROMECH Colloquium 556 on Theoretical, Numerical, and Experimental Analyses in Wood Mechanics", TU Dresden, 2015, ISBN: 978-3-00-049643-1, S. 40 - 41.

  37. F. Handle, J. Füssl, S. Neudl, D. Großegger, L. Eberhardsteiner, B. Hofko, M. Hospodka, R. Blab, H. Grothe:
    "Understanding the Microstructure of Bitumen: A CLSM and Fluorescence Approach to model Bitumen Ageing Behavior";
    in: "Proceedings of the 12th ISAP Conference on Asphalt Pavements", herausgegeben von: International Society for Asphalt Pavements; ISAP, Lino Lakes, 2014, Paper-Nr. 864, 12 S.

  38. G. Hochreiner, J. Füssl, J. Eberhardsteiner:
    "Glulam - Experimental Characterisation of Local Stiffness and Failure Modes by DIC";
    in: "Proceedings of the 32nd Danubia-Adria-Symposium (DAS 32)", University Zilina, 2015, S. 1 - 2.

  39. G. Hochreiner, J. Füssl, J. Eberhardsteiner:
    "Identification of the Failure Modes of CLT-Plates by Means of DIC Measurements";
    in: "Proceedings of the 30th Danubia-Adria-Symposium (DAS 30)", Croatian Society of Mechanics, 2013, ISBN: 978-953-7539-17-7, S. 185 - 186.

  40. G. Hochreiner, J. Füssl, J. Eberhardsteiner:
    "Punktgestützte Brettsperrholzplatten - Erfahrungen mit numerischen Methoden bezogen auf die Bemessung im Alltag";
    in: "Berichte der Fachtagung Baustatik - Baupraxis 13", Ruhr-Universität Bochum, Bochum, 2017, ISBN: 978-3-00-055827-6, S. 341 - 348.

  41. G. Hochreiner, J. Kunecky, J. Füssl:
    "Konstruktionsvielfalt bei Ausklinkungen Baustatische Modellbildung und Nachweisführung im Ingenieurholzbau";
    in: "Baustatik - Baupraxis 14", Universität Stuttgart, 2020, ISBN: 978-3-00-064639-3.

  42. B. Hofko, M. Hospodka, R. Blab, L. Eberhardsteiner, J. Füssl, H. Grothe, F. Handle:
    "Impact of Field Ageing on Low-Temperature Performance of Binder and Hot Mix Asphalt";
    in: "Proceedings of the 12th ISAP Conference on Asphalt Pavements", herausgegeben von: Raleigh; International Society of Asphalt Pavements, Lino Lakes, 2014, 18 S.

  43. G. Kandler, J. Füssl, J. Eberhardsteiner:
    "A Numerical Approach for the Mechanical and Probabilistic Assessment of Timber Products";
    in: "Book of Abstracts of the 19th Inter-Institute Seminar for Young Researchers", Technische Universität Wien, Institut für Mechanik der Werkstoffe und Strukturen, 2013, ISBN: 978-3-9503537-2-3, S. 19.

  44. G. Kandler, J. Füssl, J. Eberhardsteiner:
    "A Numerical Approach for Wood Products - From Clear Wood Properties and `Structural´ Inhomogeneities to Stochastic Aspects of Timber";
    in: "Proceedings of the XII. International Conference on Computational Plasticity (COMPLAS XII)", International Center for Numerical Methods in Engineering (CIMNE), 2013, ISBN: 978-84-941531-5-0, 1 S.

  45. G. Kandler, J. Füssl, J. Eberhardsteiner:
    "A Probabilistic Model to Account for Stiffness Variation in Glued Laminated Timber";
    in: "Proceedings of the 11th World Congress on Computational Mechanics (WCCM XI)", CIMNE, 2014, 2 S.

  46. G. Kandler, J. Füssl, J. Eberhardsteiner:
    "Influence of Stiffness Variation in Timber Boards on Effective Behavior of GLT";
    in: "Berichte des Doktorandenkolloquium Holzbau Forschung + Praxis", Universität Stuttgart, 2014, S. 111 - 118.

  47. G. Kandler, M. Lukacevic, J. Füssl:
    "Experimental and Numerical Investigations on the Mechanical Behavior of Glued Laminated Timber";
    in: "Programme & Book of Abstracts on Computational Methods in Wood Mechanics - from Material Properties to Timber Structures (CompWood 2017)", TU Verlag, Wien, 2017, ISBN: 978-3-903024-49-6, S. 36.

  48. G. Kandler, M. Lukacevic, J. Füssl:
    "From the Knot Morphology of Individual Timber Baords to the Mechanical Properties of Glued Laminated Timber";
    in: "CD-ROM Proceedings of the World Conference on Timber Engineering (WCTE 2016)", J. Eberhardsteiner, W. Winter, A. Fadai, M. Pöll (Hrg.); herausgegeben von: Vienna University of Technology; Grafisches Zentrum HTU GmbH, Vienna, 2016, ISBN: 978-3-903039-00-1, Paper-Nr. 879, 10 S.

  49. G. Kandler, L. Wagner, J. Füssl, E. Serrano, J. Eberhardsteiner:
    "Influence of Stiffness Variation in Timber Boards on Effective Behavior of GLT";
    in: "Proceedings of the 11th World Congress on Computational Mechanics (WCCM XI)", CIMNE, 2014, 2 S.

  50. H. Kariem, J. Füssl, Ch. Hellmich:
    "Dual-Scale Porosity Analysis of Bricks with Different Pore-Forming Agents and Concentrations";
    in: "Book of Abstracts of the 20th Inter-Institute Seminar for Young Researchers", Cracow University of Technology, 2015, ISBN: 978-83-7242-684-0, S. 26.

  51. H. Kariem, Ch. Hellmich, J. Füssl:
    "Dual-Scale Porosity Analysis of Fired-Clay Bricks with Different Pore-Forming Agents and Concentrations";
    in: "Book of Abstracts of the 33rd Danubia Adria Symposium on Advances in Experimental Mechanics", Slovenian Society of Experimental Mechanics, 2016, S. 34 - 35.

  52. T. Kiefer, H. Kariem, J. Füssl:
    "A Multi-Scale Material Model for the Determination of the Orthotropic Conductivity Tensor of Brick Ceramic Bodies";
    in: "Book of Abstracts of the XXIst. Inter-Institute Seminar for Young Researchers", Department of Structural Mechanics, Budapest University of Technology and Economics, 2017, S. 12.

  53. R. Lackner, Ch. Pichler, A. Jäger, E. Aigner, J. Füssl:
    "Multiscale Models for Building Materials - From Nanoindentation towards Structural Safety Assessment";
    in: "Programme & Book of Abstracts of the ECCOMAS Multidisciplinary Jubilee Symposium (EMJS) 2008", H.A. Mang, J. Eberhardsteiner, Ch. Hellmich (Hrg.); Vienna University of Technology, 2008, ISBN: 978-3-9501554-8-8, S. 65 - 66.

  54. M. Li, J. Füssl, M. Lukacevic, J. Eberhardsteiner:
    "Numerical Limit Analysis Approaches for Strength Predictions of Cross-Laminated Timber Plates";
    in: "Programme & Book of Abstracts on Computational Methods in Wood Mechanics - from Material Properties to Timber Structures (CompWood 2017)", TU Verlag, Wien, 2017, ISBN: 978-3-903024-49-6, S. 90.

  55. M. Li, J. Füssl, M. Lukacevic, J. Eberhardsteiner, C. Martin:
    "A Number Limit Analysis Approach for Predicting Strength of Clear Wood";
    in: "CD-ROM Proceedings of the World Conference on Timber Engineering (WCTE 2016)", J. Eberhardsteiner, W. Winter, A. Fadai, M. Pöll (Hrg.); herausgegeben von: Vienna University of Technology; Grafisches Zentrum HTU GmbH, Vienna, 2016, ISBN: 978-3-903039-00-1, Paper-Nr. 90, 10 S.

  56. M. Lukacevic, K. de Borst, J. Füssl, J. Eberhardsteiner:
    "Influence of Different Knot Groups on Effective Mechanical Properties of Solid-Wood Based Products Determined by Means of 3D Finite-Element Simulations";
    in: "Book of Abstracts - 8th European Solid Mechanics Conference (ESMC 2012)", herausgegeben von: TU Graz; TU Graz, 2012, ISBN: 978-3-85125-223-1, 2 S.

  57. M. Lukacevic, J. Füssl:
    "A Criterion for the Effective Bending Strength of Wooden Boards with Knots Derived by a 3 D Finite-Element Tool";
    in: "Forschungskolloquium Holzbau "Forschung und Praxis"", Universität Stuttgart, Stuttgart, 2012.

  58. M. Lukacevic, J. Füssl, J. Eberhardsteiner:
    "A Microstructure-Based Multisurface Failure Criterion for the Description of Brittle and Ductile Failure Mechanisms of Clear-Wood";
    in: "Programme & Book of Abstracts on Computational Methods in Wood Mechanics - from Material Properties to Timber Structures (CompWood 2017)", TU Verlag, Wien, 2017, ISBN: 978-3-903024-49-6, S. 28.

  59. M. Lukacevic, J. Füssl, J. Eberhardsteiner:
    "A Numerical Approach to Describe Failure of Wood - From the Wood Cell Level up to Wood-Based Products";
    in: "Proceedings of the 2015 Conference of the ASCE Engineering Mechanics Institute (EMI 2015)", American Society of Civil Engineers (ASCE), 2015.

  60. M. Lukacevic, J. Füssl, J. Eberhardsteiner:
    "A Numerical Approach to Describe Failure of Wood - From the Wood Cell Level Up to Wood-Based Products";
    in: "CD-ROM Proceedings of the World Conference on Timber Engineering (WCTE 2016)", J. Eberhardsteiner, W. Winter, A. Fadai, M. Pöll (Hrg.); herausgegeben von: Vienna University of Technology; Grafisches Zentrum HTU GmbH, Vienna, 2016, ISBN: 978-3-903039-00-1, Paper-Nr. 306, 9 S.

  61. M. Lukacevic, J. Füssl, J. Eberhardsteiner:
    "Influence of Knot Groups on Effective Mechanical Properties of Solid - Wood Based Products Determined by Means of 3D Finite - Element Simulations";
    in: "Proceedings of the XII. International Conference on Computational Plasticity (COMPLAS XII)", International Center for Numerical Methods in Engineering (CIMNE), 2013, ISBN: 978-84-941531-5-0, 1 S.

  62. M. Lukacevic, J. Füssl, J. Eberhardsteiner:
    "Simulating Failure Mechanisms in Wooden Boards with Knots by Means of a Microstructure-Based Multisurface Failure Criterion";
    in: "Proceedings of the 2018 World Conference on Timber Engineering (WCTE 2018)", The Korean Society of Wood Science Technology, 2018, 8 S.

  63. S. Pech, G. Kandler, J. Füssl:
    "Metamodel Assisted Optimization of GLT Systems by Reordering Laminations Using Metaheuristic Algorithms";
    in: "Proceedings of the 6th European Conference on Computational Mechanics (ECCM6-ECFD7)", International Center for Numerical Methods in Engineering (CIMNE), 2018.

  64. S. Pech, G. Kandler, M. Lukacevic, J. Füssl:
    "Metamodel Assisted Optimization of Glued Laminated Timber Beams by Using Metaheuristic Algorithms";
    in: "Book of Abstracts of the 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019)", J. Eberhardsteiner, J. Schöberl (Hrg.); TU Verlag, 2019, ISBN: 978-3-903024-84-7, S. 438.

  65. S. Pech, M. Lukacevic, J. Füssl:
    "Phase Field Method-Based Modeling of Fracture in Wood";
    in: "Programme & Proceedings of the China-Austria Forum for Postgraduates of Civil Engineering", J. Zhang, B. Pichler (Hrg.); Vienna University of Technology, 2019, S. 98 - 101.

  66. S. Pech, M. Lukacevic, J. Füssl:
    "Phase Field Method-Based Modeling of Fracture in Wood";
    in: "Book of Abstracts of the International Conference on Computational Methods in Wood Mechanics - from Material Properties to Timber Structures (CompWood 2019)", Linnaeus University, 2019, ISBN: 978-91-88898-64-7, S. 17.

  67. R. Reismüller, M. Lukacevic, T. Kiefer, J. Füssl:
    "A Finite-Element-Based Unit Cell Approach for Simulating Vertically Perforated Clay Block Masonry";
    in: "Proceedings of the 8th European Concress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2022)", International Center for Numerical Methods in Engineering (CIMNE), 2022, Paper-Nr. 846, 1 S.

  68. V. Stembera, J. Füssl:
    "A Performance Comparison of Different Shell Elements for Upper Bound Limit Analysis";
    in: "Book of Abstracts of the 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019)", J. Eberhardsteiner, J. Schöberl (Hrg.); TU Verlag, 2019, ISBN: 978-3-903024-84-7, S. 548.

  69. R. Suda, T. Kiefer, Ch. Schranz, J. Füssl:
    "Do Fibre Reinforced Bed Joints Affect the Compressive Strength of Brick Masonry? A Stochastic, Finite Element Based Approach to Quantify the Increase of the Load Carrying Capacity";
    in: "Programme & Proceedings of the China-Austria Forum for Postgraduates of Civil Engineering", J. Zhang, B. Pichler (Hrg.); Vienna University of Technology, 2019, S. 91 - 93.


Editorials in Tagungsbänden


  1. G. Balduzzi, E. Sacco, F. Auricchio, J. Füssl:
    "Non-Prismatic Multi-Layered Planar Beams: Critical Issues and Effective Modelling Approaches";
    in: "Proceedings of the 3rd International Conference on Mechanics of Composites", Universita Di Bologna, 2017, ISBN: 978-88-93850292, Paper-Nr. 296, 1 S.


Vorträge und Posterpräsentationen (mit Tagungsband-Eintrag)


  1. M. Autengruber, M. Lukacevic, C. Vida, S. Pech, J. Füssl:
    "Computergestützte Modellierung im Holzbau - Herausforderungen und Möglichkeiten";
    Vortrag: 25. Dresdner Baustatik-Seminar "Realität - Modellierung - Tragwerksplanung", Dresden (Deutschland); 15.10.2021; in: "25. Dresdner Baustatik-Seminar: Realität - Modellierung - Tragwerksplanung", TU-Dresden (Hrg.); (2021), ISSN: 1615-9705; S. 131 - 160.

  2. R. Blab, W. Kluger-Eigl, J. Füssl:
    "Optimized Structures for Heavy Duty Block Pavements";
    Vortrag: Ninth International Conference on the Bearing Capacity of Roads, Railways and Airfields BCRRA 2013, Trondheim, Norwegen; 25.06.2013 - 27.06.2013; in: "Proceedings - Ninth International Conference on the Bearing Capacity of Roads, Railways and Airfields", akademika publishing, Vol 1 (2013), ISBN: 978-82-321-0285-3; S. 501 - 512.

  3. R. Blab, W. Kluger-Eigl, J. Füssl, M. Arraigada, B. Hofko:
    "Accelerated Pavement Testing on Slab and Block Pavements using the New Mobile Load Simulator MLS10";
    Vortrag: 4th International Conference on Accelerated Pavement Testing, Davis, California, USA (eingeladen); 19.09.2012 - 21.09.2012; in: "Advances in Pavement Design through Full-scale Accelerated Pavement Testing", CRC Press, (2012), ISBN: 978-0-415-62138-0; S. 323 - 329.

  4. L. Eberhardsteiner, J. Füssl, B. Hofko, R. Blab:
    "Prediction of hot mix asphalt stiffness - a multiscale approach";
    Poster: Transport Research Board 94th Annual Meeting, Washington, DC; 11.01.2015 - 15.01.2015; in: "Proceedings of the Transport Research Board 94th Annual Meeting", (2015), 16 S.

  5. L. Eberhardsteiner, J. Füssl, B. Hofko, F. Handle, M. Hospodka, R. Blab, H. Grothe:
    "Micromechanical description of bitumen aging behavior";
    Vortrag: 8th RILEM International Symposium on Testing and Characterization of Sustainable and Innovative Bituminous Materials, Ancona, Italy (eingeladen); 07.10.2015 - 09.10.2015; in: "8th RILEM International Symposium on Testing and Characterization of Sustainable and Innovative Bituminous Materials", Springer Netherlands, RILEM Bookseries (2015), ISBN: 978-94-017-7342-3; S. 411 - 421.

  6. F. Handle, J. Füssl, S. Neudl, D. Großegger, L. Eberhardsteiner, B. Hofko, M. Hospodka, R. Blab, H. Grothe:
    "Understanding the Microstructure of Bitumen: A CLSM and Fluorescence Approach to model Bitumen Ageing Behavior";
    Vortrag: 12th ISAP Conference, Raleigh, North Carolina; 01.06.2014 - 05.06.2014; in: "Asphalt Pavements", R. Kim (Hrg.); Taylor and Francis Group London, 1 (2014), ISBN: 978-1-138-02693-3; S. 521 - 530.

  7. F. Handle, B. Hofko, J. Füssl, L. Eberhardsteiner, S. Neudl, M. Hospodka, D. Großegger, R. Blab, H. Grothe:
    "Bitumen Microstructure And Bitumen Ageing";
    Vortrag: 15th Austrian Chemistry Days (Chemietage), TU-Graz, Graz, Österreich; 23.09.2013 - 26.09.2013; in: "15. Österreichische Chemietage - Programm", (2013).

  8. H. Hengl, J. Füssl, W. Kluger-Eigl:
    "The influence of arch supporting effect on the load bearing capacity of paving block superstructures";
    Vortrag: ICCBP 11th International Conference on Concrete Block Pavement, Dresden; 08.09.2015 - 11.09.2015; in: "ICCBP 11th International Conference on Concrete Block Pavement", FGSV, (2015), 10 S.

  9. B. Hofko, R. Blab, M. Hospodka, J. Füssl, L. Eberhardsteiner, H. Grothe, F. Handle:
    "Aktuelles zum Alterungsverhalten von Bitumen und Asphalt";
    Vortrag: Dresdner Asphalttage, Dresden (eingeladen); 12.12.2013 - 13.12.2013; in: "Begleitband zu den 3. Dresdner Asphalttagen", TU Dresden, Dresden (2013), 9 S.

  10. B. Hofko, F. Handle, L. Eberhardsteiner, M. Hospodka, R. Blab, J. Füssl, H. Grothe:
    "Alternative Approach Toward Aging of Bitumen and Asphalt Mixes";
    Poster: Transport Research Board 94th Annual Meeting, Washington, DC; 11.01.2015 - 15.01.2015; in: "Proceedings of the Transport Research Board 94th Annual Meeting", (2015).

  11. B. Hofko, M. Hospodka, R. Blab, L. Eberhardsteiner, J. Füssl, H. Grothe, F. Handle:
    "Impact of Field Ageing on Low-Temperature Performance of Binder and Hot Mix Asphalt";
    Vortrag: 12th ISAP Conference, Raleigh, North Carolina; 01.06.2014 - 05.06.2014; in: "Aspahlt Pavements", R. Kim (Hrg.); Taylor & Francis Group London, 1 (2014), ISBN: 978-1-138-02693-3; S. 381 - 395.

  12. M. Lukacevic, J. Füssl, S. Pech, C. Vida, J. Eberhardsteiner:
    "Computational Mechanics Concepts for Wood-Based Products and Timber Structural Elements";
    Vortrag: World Conference on Timber Engineering (WCTE2021), Santiago, Chile; 09.08.2021 - 12.08.2021; in: "Proceedings of WCTE 2021 - World Conference on Timber Engineering", Santiago, Chile (2021).

  13. D. Steiner, B. Hofko, M. Hospodka, F. Handle, L. Eberhardsteiner, J. Füssl, H. Grothe, R. Blab:
    "Using Highly Oxidant Gas for Simulating Long-Term Ageing of Asphalt Mix Specimens in the Lab";
    Vortrag: 8th RILEM International Symposium on Testing and Characterization of Sustainable and Innovative Bituminous Materials, Ancona, Italy; 07.10.2015 - 09.10.2015; in: "8th RILEM International Symposium on Testing and Characterization of Sustainable and Innovative Bituminous Materials", F. Canestrari, M. Partl (Hrg.); Springer Netherlands, Rilem Bookseries (2016), ISBN: 978-94-017-7341-6; S. 189 - 202.


Vorträge und Posterpräsentationen (ohne Tagungsband-Eintrag)


  1. R. Blab, J. Füssl, L. Eberhardsteiner, R. Lackner:
    "Multiscal Modeling of Asphalt Mastics";
    Vortrag: 2nd International Workshop on Asphalt Mastics, Delft (eingeladen); 18.06.2012.

  2. R. Blab, W. Kluger-Eigl, J. Füssl:
    "Bautechnisch Optimierte Oberbauten mit Pflaster unter Einsatz der Einstein Fugentechnik";
    Poster: Lange Nacht der Forschung 2010, Klagenfurt; 05.11.2010.

  3. T. Buchner, T. Kiefer, L. Zelaya-Lainez, W. Gaggl, J. Füssl:
    "A Multitechnique Characterization and Quantification of the Microstructures of Bricks Made of Different Clayey Raw Materials";
    Poster: 37th Danubia-Adria Symposium on Advances in Experimental Mechanics, Linz, Austria; 21.09.2021 - 24.09.2021.

  4. J. Eberhardsteiner, J. Füssl:
    "Berechenbarkeit von Holz - Von der Mikrostruktur zur Baukonstruktion";
    Vortrag: Österreichische Akademie der Wissenschaften (math.-nat. Klasse), Wien (eingeladen); 23.06.2017.

  5. J. Füssl:
    "A Comprehensive Mechanical Modeling Approach for the Optimization of Wood-Based Products";
    Vortrag: EUROMECH Colloquium 556 - Theoretical, Numerical, and Experimental Analyses in Wood Mechanics, Dresden, Deutschland (eingeladen); 08.05.2015 - 10.05.2015.

  6. J. Füssl:
    "A Mechanical Modeling Approach for Wood-Based Products Taking the Wooden Microstructure into Account";
    Vortrag: 7th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2016), Crete Island, Greece; 05.06.2016 - 10.06.2016.

  7. J. Füssl:
    "A Multiscale Model for Fired Clay Brick Masonry: Upscaling of Experimentally Identified Microstructural Features to Macroscopic Elastic Stiffness and Thermal Conductivity";
    Vortrag: International Symposium on Interdisciplinary Research in Civil Engineering Sciences (IS-IRCES), Vienna, Austria & Shanghai, China; 16.09.2021 - 17.09.2021.

  8. J. Füssl:
    "A Probabilistic Model to Account for Stiffness Variation in Glued Laminated Timber";
    Vortrag: 11th World Congress on Computational Mechanics (WCCM XI) & 5th European Conference on Computational Mechanics (ECCM V) & 6th European Conference on Computational Fluid Dynamics (ECFD VI), Barcelona, Spain; 20.07.2014 - 25.07.2014.

  9. J. Füssl:
    "A Review of Computational Methods to Describe the Strength and Failure Behavior of Wood and Wood-Based Products and Their Embedment into a Holistic Design Approach";
    Vortrag: International Conference on Computational Methods in Wood Mechanics - From Material Properties to Timber Structures (CompWood 2019), Växjo, Sweden; 17.06.2019 - 19.06.2019.

  10. J. Füssl:
    "An Algorithm for Adaptive Introduction and Arrangement of Velocity Discontinuities within 3D Finite-Element-Based Upper Bound Limit Analysis Approaches and Its Application to Cross Laminated Timber Plates";
    Vortrag: XV. International Conference on Computational Plasticity - Fundamentals and Applications (COMPLAS 2019), Barcelona, Spain; 03.09.2019 - 05.09.2019.

  11. J. Füssl:
    "Bessere Berechenbarkeit von Holzmaterialien - was bringt das dem Holzbau?";
    Vortrag: HOLZBAU Messe und Kongress Salzburg 2015, Salzburg, Austria (eingeladen); 06.10.2015 - 09.10.2015.

  12. J. Füssl:
    "Computational Mechanical Modelling of Wood and Wood-Based Products";
    Vortrag: Symposium on Geometry and Computational Design (GCD3), Vienna, Austria (eingeladen); 18.11.2016.

  13. J. Füssl:
    "Computational Mechanical Modelling of Wood and Wood-Based Products";
    Vortrag: Civil Engineering Group Seminar, University of Oxford, Oxford, United Kingdom (eingeladen); 18.02.2016.

  14. J. Füssl:
    "Computational Modelling of the Mechanical Behaviour of Wood and Masonry - From the Microstructure up to the Building Element Scale";
    Vortrag: Seminar Lecture by the Institute of Materials Chemistry, TU Wien, Vienna, Austria; 05.12.2018.

  15. J. Füssl:
    "Computational Modelling of Wood and Wood-Based Products with Special Focus on Numerical Limit Analysis Concepts";
    Vortrag: 6th European Conference on Computational Fluid Dynamics (ECCM - ECFD 2018), Glasgow, United Kingdom; 11.06.2018 - 15.06.2018.

  16. J. Füssl:
    "Experimental and Numerical Investigations on the Mechanical Behavior of Glued Laminated Timber";
    Vortrag: Conference on Computaional Methods in Wood Mechanics - From Material Properties to Timber Structures (CompWood 2017), Vienna, Austria; 07.06.2017 - 09.06.2017.

  17. J. Füssl:
    "Homogenisierung von Festigkeitseigenschaften von Kompositen mittels Traglastanalyse / Ermüdungsmodell für Asphalt";
    Vortrag: Workshop Asphalt, Vienna (eingeladen); 15.12.2008 - 16.12.2008.

  18. J. Füssl:
    "Limit Analysis Based Upscaling of Strength Properties and Investigation of Failure Modes of Two-Phase Materials";
    Vortrag: 8th World Congress on Computational Mechanics (WCCM VIII) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), Venice, Italy; 30.06.2008 - 04.07.2008.

  19. J. Füssl:
    "Limit-Analysis Based Identification of Fracture and Degradation Mechanisms in Two-Phase Composite Materials";
    Vortrag: 6th International Conference on Computation of Shell and Spatial Structures (IASS-IACM 2008), Ithaca, N.Y., USA; 28.05.2008 - 31.05.2008.

  20. J. Füssl:
    "Limit-Analysis Based Upscaling of Strength Properties of Matrix-Inclusion Materials";
    Vortrag: 16th Inter-Institute Seminar for Young Researchers, Vienna, Austria; 17.05.2007 - 20.05.2007.

  21. J. Füssl:
    "Limit-Analysis Based Upscaling of Strength Properties of Matrix-Inclusion Materials";
    Poster: International Conference on Advanced Characterisation of Pavement and Soil Engineering Materials, Athens, Greece (eingeladen); 20.06.2007 - 22.06.2007.

  22. J. Füssl:
    "Making Wood Predictable Through Computational Methods - How and Why?";
    Vortrag: Symposium Perspectives in Renewables, BOKU - University of Natural Resources and Life Sciences, Vienna, Austria; 04.06.2018 - 05.06.2018.

  23. J. Füssl:
    "Micromechanical Model for the Description of Fatique Behavior of Asphalt Mixtures";
    Vortrag: 18th Inter-Institute Seminar for Young Researchers, Budapest, Hungary; 23.09.2011 - 25.09.2011.

  24. J. Füssl:
    "Multiscale Fracture Modelling of Bituminous Mixtures - From Fatigue Behaviour to Ultimate Strength Properties of Asphalt Concrete";
    Vortrag: RILEM Technical Committee 241-MCD, Annual Joint Meeting, Vienna; 25.09.2014.

  25. J. Füssl:
    "Numerical Simulation Tool for Slab and Block Pavements Validated by Means of Large-Scale Accelerated Pavement Tests";
    Vortrag: 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), Wien; 10.09.2012 - 14.09.2012.

  26. J. Füssl:
    "Prognose der Ermüdungs- und Festigkeitseigenschaften von Asphalt";
    Vortrag: Veranstaltung zum Abschluss des Christian Doppler Laboratoriums für Gebrauchsverhaltensorientierte Optimierung flexibler Straßenbefestigungen, TU Wien (eingeladen); 02.07.2009.

  27. J. Füssl:
    "Three Different Methods for Predicting the Strength Behavior of Clear Wood - A Performance Comparison and Basis for a Combined Approach";
    Vortrag: World Conference on Timber Engineering (WCTE 2016), Vienna, Austria; 22.08.2016 - 25.08.2016.

  28. J. Füssl:
    "Three Trends in Mechanical Modelling of Materials";
    Vortrag: WKO - The Future of Building Conference, Vienna, Austria; 08.05.2018 - 09.05.2018.

  29. J. Füssl:
    "Upscalling Strength Properties of Asphalt";
    Vortrag: Scientific Evaluation of the CD-Laboratory for Performance-based Optimization of Flexible Road Pavements, Vienna (eingeladen); 05.06.2007.

  30. H. Grothe, F. Handle, M. Harir, J. Füssl, A. Koyun, D. Großegger, N. Hertkorn, L. Eberhardsteiner, B. Hofko, M. Hospodka, R. Blab, P. Schmitt-Kopplin:
    "Tracking Ageing of Bitumen and its SARA Fractions Using High-Field FT-ICR Mass Spectrometry";
    Vortrag: 53rd Petersen Asphalt Research Conference, Jackson, Wyoming, USA; 18.07.2016 - 21.07.2016.

  31. B. Hofko, R. Blab, L. Eberhardsteiner, J. Füssl, H. Grothe, F. Handle, M. Hospodka:
    "Aktuelle Erkenntnisse zum Alterungsverhalten von Bitumen und Asphalt";
    Vortrag: IGV-Symposium 2014, St. Petersburg (eingeladen); 04.09.2014 - 05.09.2014.

  32. B. Hofko, L. Eberhardsteiner, J. Füssl, R. Blab:
    "Analysis of Binder Ageing by Micromechanical & Multiscale Modeling";
    Vortrag: 3rd China-Europe Workshop on Functional Pavements, Aachen (eingeladen); 06.08.2014 - 08.08.2014.

  33. B. Hofko, L. Eberhardsteiner, J. Füssl, R. Blab:
    "New Insights on Ageing of Bitumen by Micromechanical and Multiscale Modelling & Asphalt Mix Design Optimization and Specification by Performance Based Testing";
    Vortrag: SIIV Summer School, Bologna (eingeladen); 08.09.2014 - 12.09.2014.

  34. H. Kariem, Ch. Hellmich, J. Füssl:
    "Dual-Scale Porosity Analysis of Fired-Clay Bricks with Different Pore-Forming Agents and Concentrations";
    Poster: 33rd Danubia-Adria Symposium on Advances in Experimental Mechanics, Portoroz, Slovenia; 20.09.2016 - 23.09.2016.

  35. W. Kluger-Eigl, J. Füssl, R. Blab:
    "Experimental Identification of Joint Interaction of Paving Blocks with Sand Filled Joints";
    Poster: ICCBP 11th International Conference on Concrete Block Pavement, Dresden (eingeladen); 08.09.2015 - 11.09.2015.

  36. M. Lukacevic, J. Füssl, S. Pech, J. Eberhardsteiner:
    "Simulation of Failure Mechanisms in Wooden Boards with Knots as a Basis for Timber Engineering Design Cencepts";
    Poster: Engineering Mechanics Institute 2019 Conference, Pasadena, CA, USA; 18.06.2019 - 21.06.2019.

  37. S. Pech, M. Lukacevic, J. Füssl:
    "Phase field method-based modeling of fracture in wood";
    Vortrag: 16. International Conference on Computational Plasticity, Fundamentals and Applications, Barcelona, Spain; 07.09.2021 - 09.09.2021.

  38. R. Suda, T. Kiefer, T. Buchner, C. Schranz, J. Füssl:
    "A Multiscale Model for Brick Masonry with Special Focus on Bed Joint Reinforcement";
    Vortrag: 14th World Congress in Computational Mechanics (WCCM) & ECCOMAS Congress 2020, Virtual Congress; 11.01.2021 - 15.01.2021.


Patente


  1. H. Grothe, F. Handle, D. Großegger, R. Blab, B. Hofko, M. Hospodka, J. Füssl, L. Eberhardsteiner:
    "Fluoroscan";
    Patent: Österreich, Nr. A 50522/2015, At 517 366 B1 2017-07-15; eingereicht: 22.06.2015, erteilt: 15.07.2017.

  2. H. Grothe, F. Handle, D. Großegger, R. Blab, B. Hofko, M. Hospodka, J. Füssl, L. Eberhardsteiner:
    "Method And Device For Determining A Material Property Of A Bitumen Material";
    Patent: United States of America, Nr. 10527547; eingereicht: 21.12.2017, erteilt: 07.01.2020.

  3. B. Hofko, M. Hospodka, J. Füssl, L. Eberhardsteiner, H. Grothe, F. Handle, D. Großegger, R. Blab:
    "Method And Device For Determining A Material Property Of A Bitumen Material";
    Patent: International, Nr. Wo 2016/205847 A1; eingereicht: 29.12.2016.


Dissertationen (eigene und begutachtete)


  1. M. Autengruber:
    "Numerical Simulation Concepts for Moisture Transport in Wood and Wood-Based Products, Below and Above the Fiber Saturation Point, to Predict Moisture-Induced Failure Mechanisms";
    Betreuer/in(nen), Begutachter/in(nen): M. Lukacevic, J. Füssl, S. Fortino, E. Serrano; Institut für Mechanik der Werkstoffe und Strukturen, 2021; Rigorosum: 03/2021.

  2. T. Buchner:
    "Multiscale Material Modeling of Fired Clay Bricks: Experimental Characterization of Microstructural Morphometry and Continuum Mechanical Predition of Thermal Conductivity, Elastic Stiffness, and Strength Properties";
    Betreuer/in(nen), Begutachter/in(nen): J. Füssl, M. Königsberger, W. Pabst, A. Robisson; Institut für Mechanik der Wersktoffe und Strukturen, 2022; Rigorosum: 30.06.2022.

  3. J. Füssl:
    "Multiscale Fracture Modeling of Bituminous Mixtures - From Fatique Behavior to Ultimate Strength Properties of Asphalt Concrete";
    Betreuer/in(nen), Begutachter/in(nen): R. Lackner, J. Eberhardsteiner; Institut für Mechanik der Werkstoffe und Strukturen, 2010; Rigorosum: 01.07.2010.

  4. P. Grönquist:
    "Smart Manufacturing of Curved Mass Timber Components by Self-shaping";
    Betreuer/in(nen), Begutachter/in(nen): I. Burgert, E. Gamstedt, J. Füssl, M. Rüggeberg; Institute for Building Materials , ETH Zürch, 2020; Rigorosum: 21.02.2020.

  5. H. Hengl:
    "Development and Application of Numerical Simulation Tools for the Prediction of the Structural Behaviour of Paving Block Pavements";
    Betreuer/in(nen), Begutachter/in(nen): J. Füssl, J. Eberhardsteiner, R. Blab, F. Wellner; Institut für Mechanik der Werkstoffe und Strukturen, 2017; Rigorosum: 2017.

  6. U. Hofer:
    "Experimental Characterization and Modeling of Viscoelastic Behavior of Man-Made and Biomaterials: Effect of Fiber Reinforcement and Environmental Condition";
    Betreuer/in(nen), Begutachter/in(nen): R. Lackner, J. Füssl; Arbeitsbereich für Materialtechnologie, Universtität Innsbruck, 2019; Rigorosum: 28.10.2019.

  7. C. Huber:
    "Untersuchungen zur Verstärkung und zum Querzugverhalten von Holzbalken";
    Betreuer/in(nen), Begutachter/in(nen): A. Kolbitsch, J. Füssl; Institut für konstruktiven Ingenieurbau, Universität für Bodenkultur, 2019; Rigorosum: 22.07.2019.

  8. G. Kandler:
    "Probabilistic Modelling of the Elastic Behaviour of Glued Laminated Timber";
    Betreuer/in(nen), Begutachter/in(nen): J. Füssl, J. Eberhardsteiner, A. Olsson; Institut für Mechanik der Werkstoffe und Strukturen, 2016; Rigorosum: 01.04.2016.

  9. H. Kariem:
    "Phase Identification in Fired and Biological Ceramics: a combined SEM-EDX, XRD, micro-CT, nanoindentation, and scale transition analysis";
    Betreuer/in(nen), Begutachter/in(nen): J. Füssl, Ch. Hellmich, L. Sorelli, P.H. Mayrhofer; Institut für Mechanik der Werkstoffe und Strukturen, 2018; Rigorosum: 05.10.2018.

  10. T. Kiefer:
    "A Multiscale Concept Based on Computational Mechanical Methods to Link Thermal as well as Mechanical Properties from the Microstructure of Fired Clay to the Structural Scale of Masonry";
    Betreuer/in(nen), Begutachter/in(nen): J. Füssl, Ch. Hellmich, A. Giraud, G. Meschke; Institut für Mechanik der Werkstoffe und Strukturen, 2019; Rigorosum: 29.05.2019.

  11. M. Li:
    "Finite-Element-Based Limit Analysis for Strength Predictions of Wood at Different Scales of Observation and a Novel Algorithm for Adaptive Implementation of Velocity Discontinuites in Upper Bound Approaches";
    Betreuer/in(nen), Begutachter/in(nen): J. Eberhardsteiner, J. Füssl, C. Martin, Ch. Hellmich; Institut für Mechanik der Werkstoffe und Strukturen, 2018; Rigorosum: 08.06.2018.

  12. D. Pellis:
    "Quad Meshes as Optimized Architectural Freeform Structures";
    Betreuer/in(nen), Begutachter/in(nen): H. Pottmann, J. Füssl; Institut für Diskrete Mathematik und Geometrie, TU Wien, 2019; Rigorosum: 25.10.2019.

  13. L. Zelaya-Lainez:
    "Multimethod Identification of "Universal" Patterns in Biological, Metallic, and Ceramic Materials: Chemical Composition, Elasticity, and Hardness";
    Betreuer/in(nen), Begutachter/in(nen): Ch. Hellmich, St. Scheiner, J. Füssl, H. Redl, K. Katti; Institut für Mechanik der Werkstoffe un Strukturen, 2021; Rigorosum: 02.02.2021.


Diplom- und Master-Arbeiten (eigene und betreute)


  1. M. Autengruber:
    "Modellierung und numerische Simulation des Feuchte- und Temperaturverhaltens von Holz-Aluminium-Verbundträgern";
    Betreuer/in(nen): M. Lukacevic, J. Füssl, J. Eberhardsteiner; Institut für Mechanik der Werkstoffe und Strukturen, 2016; Abschlussprüfung: 17.06.2016.

  2. F. Brandstätter:
    "Numerisches Simulationskonzept zur Bestimmung der Feuchtebeanspruchung und dem resultierenden Rissverhalten in unterschiedlichen Holzquerschnitten in Abhängigkeit des Standortes in Österreich";
    Betreuer/in(nen): M. Autengruber, M. Lukacevic, J. Füssl; Institut für Mechanik der Werkstoffe un Strukturen, 2020; Abschlussprüfung: 25.09.2020.

  3. J. Füssl:
    "Limit Analysis for Upscaling of Strength Properties of Asphalt";
    Betreuer/in(nen): R. Lackner; Institut für Mechanik der Werkstoffe und Strukturen, 2006.

  4. M. Griessner:
    "Bending Strength of Wooden Boards with Knots - Evaluation of Experiments Using Full-Field Deformation Measurements as a Basis for the Optimization of a 3D Numerical Simulation Tool";
    Betreuer/in(nen): M. Lukacevic, J. Füssl; Institut für Mechanik der Werkstoffe und Strukturen, 2013; Abschlussprüfung: 26.04.2013.

  5. C. Gröstlinger:
    "Numerische Simulation des feuchteinduzierten Rissverhaltens von Holzquerschnitten unter realer Klimabeanspruchung";
    Betreuer/in(nen): M. Autengruber, M. Lukacevic, J. Füssl; Institut für Mechanik der Werkstoffe und Strukturen, 2018; Abschlussprüfung: 19.01.2018.

  6. P. Hacker:
    "3D Finite Element Modeling of a Form Fitting Cross Laminated Timber Connection";
    Betreuer/in(nen): J. Füssl, M. Lukacevic; Institut für Mechanik der Werkstoffe und Strukturen, 2020; Abschlussprüfung: 17.12.2020.

  7. G. Kandler:
    "Review of Stochastic Finite-Element Approaches and Assessment of their Applicability to Wood-Based Products";
    Betreuer/in(nen): J. Füssl, J. Eberhardsteiner; Institut für Mechanik der Werkstoffe und Strukturen, 2012; Abschlussprüfung: 23.03.2012.

  8. T. Kiefer:
    "Numerische Modellierung von Ziegelstrukturen zur Prognose der einaxialen Druckfestigkeit und effektiven Wärmeleitfähigkeit";
    Betreuer/in(nen): J. Füssl, J. Eberhardsteiner; Institut für Mechanik der Werkstoffe und Strukturen, 2015; Abschlussprüfung: 20.03.2015.

  9. R. Lampert:
    "Failure Modes of Wood Cells Identified by an Approach Based on the Extended Finite Element Method";
    Betreuer/in(nen): M. Lukacevic, J. Füssl, J. Eberhardsteiner; Institut für Mechanik der Werkstoffe und Strukturen, 2014; Abschlussprüfung: 2014.

  10. M. Macho:
    "Das mechanische Verhalten von Holz-Beton-Verbunddecken, untersucht mittels numerischer Simulationen";
    Betreuer/in(nen): J. Füssl, M. Lukacevic; Institut für Mechanik der Werkstoffe und Strukturen, 2021; Abschlussprüfung: 26.11.2021.

  11. S. Pech:
    "Metamodel Assisted Optimisation of Glued Laminated Timber Systems by Reordering Laminations Using Metaheuristic Algorithms";
    Betreuer/in(nen): G. Kandler, J. Füssl, J. Eberhardsteiner; Institut für Mechanik der Werkstoffe und Strukturen, 2017; Abschlussprüfung: 20.10.2017.

  12. S. Pillwein:
    "Gestaltung von Freiform-Holztragwerken durch elastische Verformung";
    Betreuer/in(nen): J. Füssl, M. Lukacevic; Institut für Mechanik der Werkstoffe und Strukturen, 2017; Abschlussprüfung: 24.11.2017.

  13. T. Raimer:
    "Der Einfluss des Aufbringens von Frischbeton auf die Feuchtigkeitsverteilung in Holz-Beton-Verbundkonstruktionen mit Kerven, untersucht mittels numerischer Simulationen";
    Betreuer/in(nen): M. Autengruber, M. Lukacevic, J. Füssl; Institut für Mechanik der Werkstoffe un Strukturen, 2020; Abschlussprüfung: 23.04.2020.

  14. V. Senk:
    "Experimentelle Untersuchungen an Dachziegeln als Basis numerischer Simulationen zur Vorhersage der Tragfähigkeit";
    Betreuer/in(nen): T. Kiefer, J. Füssl; Institut für Mechanik der Werkstoffe un Strukturen, 2020; Abschlussprüfung: 25.09.2020.

  15. M. Senoner:
    "3D-Finite-Elemente-Modell zur mechanischen Bewertung eines neuen Fenstermontagesystems unter Verwendung eines multifunktionalen Füllmaterials";
    Betreuer/in(nen): J. Füssl, M. Lukacevic; Institut für Mechanik der Werkstoffe und Strukturen, 2021; Abschlussprüfung: 22.10.2021.

  16. R. Suda:
    "Finite Element Based Determination of the Vertical Load Carrying Capacity Increase of Brick Masonry Due to Fibre Reinforced Bed Joints";
    Betreuer/in(nen): J. Füssl, T. Kiefer, Ch. Schranz; Institut für Mechanik der Werkstoffe und Strukturen, 2019; Abschlussprüfung: 18.01.2019.

  17. C. Vida:
    "Computergestützter Modellierungsansatz zur Bestimmung der Biegefestigkeit von Brettschichtholzträgern unter Berücksichtigung von Astgruppen und quasi-sprödem Materialversagen";
    Betreuer/in(nen): M. Lukacevic, S. Pech, J. Füssl; Institut für Mechanik der Werkstoffe un Strukturen, 2020; Abschlussprüfung: 25.09.2020.

  18. M. Wörndle:
    "A Numerical Simulation Tool for Modeling the Forming Process of Plywood";
    Betreuer/in(nen): J. Füssl, K. de Borst; Institut für Mechanik der Werkstoffe und Strukturen, 2012; Abschlussprüfung: 23.03.2012.


Wissenschaftliche Berichte


  1. R. Blab, M. Buchta, J. Füssl:
    "Zustandserfassung, materialtechnische Untersuchungen am Bestand und Ausarbeitung von Instandsetzungsvarianten, A4 Ostautobahn Abschnitt Neusiedl-Staatsgrenze Nicklsdorf";
    Bericht für Autobahn- und Schnellstraßenfinanzierungs AG; Berichts-Nr. 10501, 2010; 54 S.

  2. R. Blab, W. Kluger-Eigl, J. Füssl:
    "Bautechnisch optimierte Oberbauten mit Pflasterdecken unter Einsatz des Einstein-Systems - Phase 3";
    Bericht für Semmelrock Stein+Design GmbH & CoKG; 2013; 72 S.

  3. R. Blab, W. Kluger-Eigl, J. Füssl:
    "Ergänzende Ultraschallmessungen Vorsatz- und Kernbeton";
    Bericht für Semmelrock Ebenseer Baustoffindustrie GmbH & CoKG; Berichts-Nr. 11506, 2011; 8 S.

  4. R. Blab, W. Kluger-Eigl, J. Füssl:
    "Fußgängerezone Meidlinger Hauptstraße - Oberbaudimensionierung mit einer Pflasterplattendecke";
    Bericht für Magistrat der Stadt Wien - MA 28, Straßenverwaltung und Straßenbau; 2014; 35 S.

  5. R. Blab, W. Kluger-Eigl, J. Füssl, S. Burtscher, C. Hecht:
    "Bautechnisch optimierte Oberbauten mit Pflasterdecken unter Einsatz des Einstein-Systems - Phase 1";
    Bericht für Semmelrock Ebenseer Baustoffindustrie GmbH&CoKG; 2010; 107 S.

  6. R. Blab, W. Kluger-Eigl, J. Füssl, L. Eberhardsteiner:
    "Bautechnisch optimierte Oberbauten mit Pflasterdecken unter Einsatz des Einstein-Systems - Phase 2";
    Bericht für Semmelrock Stein+Design GmbH & CoKG; 2012; 175 S.

  7. R. Blab, W. Kluger-Eigl, J. Füssl, T. Hessmann, B. Gagliano:
    "CR-Projekt Pflasterbauweisen - 1. Forschungsjahr";
    Bericht für Forum Qualitätspflaster (FQP); 2014; 76 S.

  8. B. Hofko, R. Blab, L. Eberhardsteiner, J. Füssl, H. Grothe, F. Handle, M. Hospodka:
    "1. Zwischenbericht des FFG-Bridge Projekts "Oekophalt"";
    Bericht für FFG; Berichts-Nr. 01, 2013; 20 S.

  9. B. Hofko, R. Blab, L. Eberhardsteiner, J. Füssl, H. Grothe, F. Handle, M. Hospodka:
    "2. Zwischenbericht des FFG-Bridge Projekts "Oekophalt"";
    Bericht für FFG; Berichts-Nr. 02, 2013; 20 S.

  10. B. Hofko, L. Eberhardsteiner, J. Füssl, F. Handle, M. Hospodka, D. Steiner, R. Blab, H. Grothe:
    "Endbericht zum FFG-Bridge Projekt "Oekophalt"";
    Bericht für FFG; Berichts-Nr. 3, 2014; 34 S.

  11. W. Kluger-Eigl, T. Bader, J. Füssl:
    "Ultraschallprüfungen Vorsatz- und Kernbeton";
    Bericht für Weissenböck Baustoffwerk Gesellschaft m.b.H.; 2012; 10 S.

  12. W. Kluger-Eigl, R. Blab, B. Gagliano, H. Hengl, J. Füssl:
    "CR-Projekt Pflasterbauweisen - 3. Forschungsjahr";
    Bericht für Forum Qualitätspflaster (FQP); 2016; 205 S.

  13. W. Kluger-Eigl, R. Blab, T. Hessmann, B. Gagliano, J. Füssl, H. Hengl:
    "CR-Projekt Pflasterbauweisen - 2. Forschungsjahr";
    Bericht für Forum Qualitästpflaster (FQP); 2015; 167 S.

  14. W. Kluger-Eigl, H. Hengl, R. Blab, J. Füssl:
    "Residenzplatz Salzburg Pflasterplattendimensionierung";
    Bericht für Magistrat Salzburg Straßen- und Brückenamt; Berichts-Nr. 1395303, 2017; 24 S.