TU Home
This publication list has been generated automatically from the publication data of the Faculty of Mechanical and Industrial Engineering. Please invoke the page "Publications of the Faculty" directly for more complex searches and queries, or use the global search function of the Publication Database of the Vienna University of Technology!


Publication Database Home  

Publication list for
Helmut J. Böhm
E317 - Institute for Lightweight Design and Structural Biomechanics
as author or essentially involved person

291 records (1987 - 2022)

The complete list of publications of the Faculty of Mechanical and Industrial Engineering is available from the publication database beginning with the publication year 2002. The database may but need not necessarily contain publications dated earlier than 2002.

A special structure has been chosen for the creation of the following list. Therefore, certain publications may appear several times or may be omitted from the list altogether. The sum of the numbers of records in the sections below may therefore differ from the number shown above.


Books and Book Editorships


  1. J. Eberhardsteiner, H. J. Böhm, F. G. Rammerstorfer (ed.):
    "CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)";
    Vienna University of Technology, Wien, 2012, ISBN: 978-3-9502481-9-7.

  2. J. Eberhardsteiner, H. J. Böhm, Franz Rammerstorfer (ed.):
    "Book of Abstracts of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)";
    Vienna University of Technology, Wien, 2012, ISBN: 978-3-9502481-8-0; 447 pages.

  3. H. J. Böhm (ed.):
    "Mechanics of Microstructured Materials";
    Springer-Verlag, Wien, 2004, ISBN: 3-211-24154-x; 306 pages.

  4. H. J. Böhm:
    "Mechanics of Microstructured Materials";
    in series "CISM COURSES AND LECTURES No. 464", series editor: W. Schneider et al.; issued by: CISM; Springer-Verlag, Wien, New York, 2004, ISBN: 3-211-24154-x, 306 pages.

  5. H. J. Böhm:
    "Computer Based Micromechanical Investigations of the Thermomechanical Behavior of Metal Matrix Composites";
    VDI Verlag GmbH, Düsseldorf, 1991, ISBN: 3-18-140118-8; 134 pages.


Publications in Scientific Journals


  1. H. J. Böhm, G. Zickler, F.D. Fischer, J. Svoboda:
    "Strain and Interface Energy of Ellipsoidal Inclusions Subjected to Volumetric Eigenstrains";
    Archive of Applied Mechanics, 92 (2022), 405 - 411.

  2. H. J. Böhm, G. Zickler, F.D. Fischer, J. Svoboda:
    "Role of Elastic Strain Energy in Spheroidal Precipitates Revisited";
    Mechanics of Materials, 155 (2021), 103781.

  3. H. J. Böhm:
    "Comparison of Analytical and Numerical Models for the Thermoelastic Behavior of Composites Reinforced by Coated Spheres";
    International Journal of Engineering Science, 142 (2019), 216 - 229.

  4. M. Bartosik, H. J. Böhm, C. Krywka, Z. Zhang, P.H. Mayrhofer:
    "Influence of Phase Transformation on the Damage Tolerance of Ti-Al-N Coatings";
    Vacuum, 155 (2018), 153 - 157.

  5. D. Kuksenko, H. J. Böhm, B. Drach:
    "Effect of Micromechanical Parameters of Composites with Wavy Fibers on their Effective Response under Large Deformations";
    Advances in Engineering Software, 121 (2018), 206 - 222.

  6. H. J. Böhm, A. Rasool:
    "Effects of Particle Shape on the Thermoelastoplastic Behavior of Particle Reinforced Composites";
    International Journal of Solids and Structures, 87 (2016), 90 - 101.

  7. H. J. Böhm, P.J. Thurner:
    "Leichtbau und Biomechanik auf allen Längenskalen - das Institut für Leichtbau und Strukturbiomechanik der TU Wien";
    ÖIAZ, 161 (2016), 195 - 200.

  8. M. Bartosik, M. Todt, D. Holec, J. Todt, Z. Zhang, L. Zhou, H. Riedl, H. J. Böhm, F. G. Rammerstorfer, P.H. Mayrhofer:
    "Thermal Expansion of Rock-Salt Cubic AlN";
    Applied Physics Letters, 107 (2015), 071602.

  9. A.Y. Matveeva, H. J. Böhm, G. Kravchenko, F.W.J. van Hattum:
    "Investigation of the Embedded Element Technique for Modelling Wavy CNT Composites";
    CMC - Computers Materials & Continua, 42 (2014), 1; 1 - 23.

  10. A.Y. Matveeva, S.V. Pyrlin, M.M.D. Ramos, H. J. Böhm, F.W.J. van Hattum:
    "Influence of Waviness and Curliness of Fibres on Mechanical Properties of Composites";
    Computational Materials Science, 87 (2014), 1 - 11.

  11. J. Eberhardsteiner, H. J. Böhm, F. G. Rammerstorfer, H.A. Mang, M. Pöll:
    "ECCOMAS 2012 - Sixth European Congress on Computational Methods in Applied Sciences and Engineering";
    Computer Assisted Methods in Engineering and Science, 19 (2012), 305 - 308.

  12. B. Klusemann, H. J. Böhm, B. Svendsen:
    "Homogenization Methods for Multi-Phase Elastic Composites with Non-Elliptical Reinfocements: Comparisons and Benchmarks";
    European Journal of Mechanics - A/Solids, 34 (2012), 21 - 37.

  13. A. Rasool, H. J. Böhm:
    "Effects of Particle Shape on the Macroscopic and Microscopic Linear Behaviors of Particle Reinforced Composites";
    International Journal of Engineering Science, 58 (2012), 21 - 34.

  14. D. Duschlbauer, H. J. Böhm, H. E. Pettermann:
    "Modeling Interfacial Effects on the Thermal Conduction Behavior of Short Fiber Reinforced Composites";
    International Journal of Materials Research, 2011 (2011), 6; 717 - 726.

  15. H. E. Pettermann, C.O. Huber, M.H. Luxner, S. Nogales, H. J. Böhm:
    "An Incremental Mori-Tanaka Homogenization Scheme for Finite Strain Thermoelastoplasticity of MMCs";
    Materials, 3 (2010), 1; 434 - 451.

  16. H. J. Böhm, D. Duschlbauer, H. E. Pettermann, J. Segurado, A. F. Plankensteiner:
    "Modeling of the Densification of Porous Molybdenum by a Unit Cell Approach";
    Journal of the Mechanical Behavior of Materials, 19 (2009), 5; 289 - 296.

  17. B. Hößl, H. J. Böhm, C.F. Schaber, F. G. Rammerstorfer, F.G. Barth:
    "Finite Element Modeling of Arachnid Slit Sensilla: II. Actual Lyriform Organs and the Face Deformations of the Individual Slits";
    Journal of Comparative Physiology A, 195 (2009), 9; 881 - 894.

  18. H. J. Böhm, S. Nogales:
    "Mori-Tanaka Models for the Thermal Conductivity of Composites with Interfacial Resistance and Particle Size Distributions";
    Composites Science and Technology, 68 (2008), 5; 1181 - 1187.

  19. S. Nogales, H. J. Böhm:
    "Modeling of the Thermal Conductivity and Thermomechanical Behavior of Diamond Reinforced Composites";
    International Journal of Engineering Science, 46 (2008), 6; 156 - 163.

  20. D. H. Pahr, H. J. Böhm:
    "Assessment of Mixed Uniform Boundary Conditions for Predicting the Mechanical Behavior of Elastic and Inelastic Discontinuously Reinforced Composites";
    CMES - Computer Modeling in Engineering and Sciences, 34 (2008), 2; 117 - 136.

  21. J. Flaquer, A. Ríos, A. Martín-Meizoso, S. Nogales, H. J. Böhm:
    "Effect of Diamond Shapes and Associated Thermal Boundary Resistance on Thermal Conductivity of Diamond-Based Composites";
    Computational Materials Science, 41 (2007), 2; 156 - 163.

  22. B. Hößl, H. J. Böhm, F. G. Rammerstorfer, F.G. Barth:
    "Finite Element Modeling of Arachnid Slit Sensilla - I. The Mechanical Significance of Different Slit Arrays";
    Journal of Comparative Physiology A, 193 (2007), 4; 445 - 459.

  23. P.H. Mayrhofer, F.D. Fischer, H. J. Böhm, C. Mitterer, J.M. Schneider:
    "Energetic Balance and Kinetics for the Decomposition of Supersaturated Ti_(1-x)Al_xN";
    Acta Materialia, 55 (2007), 4; 1441 - 1446.

  24. A. Starlinger, P. Casagrande, H. J. Böhm:
    "Die Entwicklung einer automatisierten Auswerteroutine zur Ermüdungsauswertung von Schienenfahrzeugkomponenten";
    Materialprüfung, 49 (2007), 414 - 417.

  25. A. Weck, J. Segurado, J. LLorca, D. Wilkinson, H. J. Böhm:
    "Numerical Simulations of Void Coalescence in Model Materials Using a Nonlocal Ductile Damage Approximation";
    International Journal of Fracture, 148 (2007), 3; 205 - 219.

  26. C. Chimani, G.X. Shan, K. Mörwald, O. Kolednik, H. J. Böhm, D. Duschlbauer, T. Drabek:
    "Micromechanical Evaluation of Intergranular Crack Growth under Continuous Casting Conditions;";
    Revue de Métallurgie, 103 (2006), 3; 131 - 138.

  27. T. Daxner, R.D. Bitsche, H. J. Böhm:
    "Space-Filling Polyhedra as Mechanical Models for Solidified Dry Foam";
    Materials Transactions, 47 (2006), 9; 2213 - 2216.

  28. T. Drabek, H. J. Böhm:
    "Micromechanical Finite Element Analysis of Metal Matrix Composites Using Nonlocal Ductile Failure Models";
    Computational Materials Science, 37 (2006), 1-2; 29 - 36.

  29. D. Duschlbauer, H. J. Böhm, H. E. Pettermann:
    "Computational Simulation of Composites Reinforced by Planar Random Fibers: Homogenization and Localization by Unit Cell and Mean Field Approaches";
    Journal of Composite Materials, 40 (2006), 24; 2217 - 2234.

  30. F.D. Fischer, H. J. Böhm, E.R. Oberaigner, T. Waitz:
    "The Role of Elastic Contrast on the Strain Energy and the Stress State of a Spheroidal Inclusion with a General Eigenstrain State";
    Acta Materialia, 54 (2006), 1; 151 - 156.

  31. B. Hößl, H. J. Böhm, F. G. Rammerstorfer, R. Müllan, F.G. Barth:
    "Studying Arachnid Slit Sensilla by a Fracture Mechanical Approach: Kachanov's Method and Slit Face Displacements";
    Journal of Biomechanics, 39 (2006), 10; 1761 - 1768.

  32. H. J. Böhm, D. Duschlbauer, T. Drabek, O. Kolednik, G.X. Shan, C.M. Chimani:
    "Estudios Numéricos de Sensibilidad a Grietas en Hilos de Colada Continua";
    Siderurgia, 129 (2005), 19 - 25.

  33. T. Drabek, H. J. Böhm:
    "Damage Models for Studying Ductile Matrix Failure in Composites";
    Computational Materials Science, 32 (2005), 3; 329 - 336.

  34. F.D. Fischer, H. J. Böhm:
    "On the Role of the Transformation Eigenstrain on the Growth or Shrinkage of Spheroidal Isotropic Precipitates";
    Acta Materialia, 53 (2005), 2; 367 - 374.

  35. H. J. Böhm:
    "Continuum Models for the Thermomechanical Behavior of Discontinuously Reinforced Materials";
    Advanced Materials, 6 (2004), 8; 626 - 633.

  36. H. J. Böhm, W. Han, A. Eckschlager:
    "Multi-Inclusion Unit Cell Studies of Reinforcement Stresses and Particle Failure in Discontinuously Reinforced Ductile Matrix Composites";
    CMES - Computer Modeling in Engineering and Sciences, 5 (2004), 1; 5 - 20.

  37. H. J. Böhm, F.D. Fischer:
    "Corrigendum to 'Evaluation of Elastic Strain Energy of Spheroidal Inclusions with Uniform Volumetric and Shear Eigenstress'";
    Scripta Materialia, 49 (2003), 107.

  38. D. Duschlbauer, H. J. Böhm, H. E. Pettermann:
    "Numerical Simulation of Thermal Conductivity of MMCs: Effect of Thermal Interface Resistance";
    Materials Science and Technology, 19 (2003), 8; 1107 - 1114.

  39. D. Duschlbauer, H. E. Pettermann, H. J. Böhm:
    "Heat Conduction of a Spheroidal Inhomogeneity with Imperfectly Bonded Interface";
    Journal of Applied Physics, 94 (2003), 3; 1539 - 1549.

  40. D. Duschlbauer, H. E. Pettermann, H. J. Böhm:
    "Mori-Tanaka Based Evaluation of Inclusion Stresses in Composites with Nonaligned Reinforcements";
    Scripta Materialia, 48 (2003), 3; 223 - 228.

  41. H. J. Böhm, A. Eckschlager, W. Han:
    "Multi-Inclusion Unit Cell Models for Metal Matrix Composites with Randomly Oriented Discontinuous Reinforcements";
    Computational Materials Science, 25 (2002), 42 - 53.

  42. A. Eckschlager, H. J. Böhm, W. Han:
    "A Unit Cell Model for Brittle Fracture of Particles Embedded in a Ductile Matrix";
    Computational Materials Science, 25 (2002), 85 - 91.

  43. H. E. Pettermann, H. J. Böhm, J. Alcalá:
    "Normalized Diagrams for Micro-Mechanical Estimates of the Elastic Response of Composite Materials";
    Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 33A (2002), 10; 3187 - 3199.

  44. J. Segurado, P. Parteder, A. F. Plankensteiner, H. J. Böhm:
    "Micromechanical Studies of the Densification of Porous Molybdenum";
    Materials Science and Engineering A, A333 (2002), 1-2; 270 - 278.

  45. H. J. Böhm, W. Han:
    "Comparisons Between Three-Dimensional and Two-Dimensional Multi-Particle Unit Cell Methods for Particle Reinforced Composites";
    Modelling and Simulation in Materials Science and Engineering, 9 (2001), 2; 47 - 65.

  46. W. Han, A. Eckschlager, H. J. Böhm:
    "The Effects of Three-Dimensional Multi-Particle Arrangements on the Mechanical Behavior and Damage Initiation of Particle-Reinforced MMCs";
    Composites Science and Technology, 61 (2001), 11; 1581 - 1590.

  47. C.M. Chimani, F. G. Rammerstorfer, H. J. Böhm:
    "On Curvature Effects on the Materials Description of Unidirectionally Reinforced Composite Materials";
    Computer Methods in Applied Mechanics and Engineering, 185 (2000), 2-4; 191 - 201.

  48. T. Daxner, H. J. Böhm, F. G. Rammerstorfer, R. Denzer, M. Maier:
    "Simulation des elasto-plastischen Materialverhaltens von Metallschaum mit Hilfe von 2D und 3D Einheitszellen-Modellen";
    Materialwissenschaft und Werkstofftechnik, 31 (2000), 447 - 450.

  49. T. Daxner, F. G. Rammerstorfer, H. J. Böhm:
    "Adaptation of Density Distributions for Optimising Aluminium Foam Structures";
    Materials Science and Technology, 16 (2000), 7-8; 935 - 939.

  50. T. Daxner, H. J. Böhm, F. G. Rammerstorfer:
    "Mesoscopic Simulation of Inhomogeneous Metallic Foams with Respect to Energy Absorption";
    Computational Materials Science, 16 (1999), 1-4; 61 - 69.

  51. H. Pettermann, A. F. Plankensteiner, H. J. Böhm, F. G. Rammerstorfer:
    "A Thermo-Elasto-Plastic Constitutive Law for Inhomogeneous Materials Based on an Incremental Mori-Tanaka Approach";
    Computers and Structures, 71 (1999), 2; 197 - 214.

  52. C.M. Chimani, H. J. Böhm, F. G. Rammerstorfer:
    "On Interface Edge Singularities in Layered Composites";
    ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, 78 (1998), Supplement 1; 49 - 52.

  53. A. F. Plankensteiner, H. J. Böhm, F. G. Rammerstorfer, H. E. Pettermann:
    "Multiscale Modeling of Highly Heterogeneous Particulate MMCs";
    Journal de Physique, 8 (1998), 301 - 308.

  54. E. Werner, H. J. Böhm, W. Prantl, F. G. Rammerstorfer:
    "Plasticity and Damage of a Fiber Reinforced Aluminum Alloy: Experiments and Micromechanical Modeling";
    ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, 78 (1998), Supplement 1; 77 - 80.

  55. H. J. Böhm, F.D. Fischer, G. Reisner:
    "Elastic Strain Energy of Spheroidal Inclusions with Volumetric and Shear Eigenstrains";
    Scripta Materialia, 36 (1997), 9; 1053 - 1059.

  56. C.M. Chimani, H. J. Böhm, F. G. Rammerstorfer:
    "On Stress Singularities at Free Edges of Bimaterial Junctions - A Micromechanical Study";
    Scripta Materialia, 36 (1997), 8; 943 - 947.

  57. H. E. Pettermann, H. J. Böhm, F. G. Rammerstorfer:
    "Some Direction Dependent Properties of Matrix-Inclusion Type Composites with Given Reinforcement Orientation Distributions";
    Composites - Part B: Engineering, 28B (1997), 3; 253 - 265.

  58. A.F. Plankensteiner, H. J. Böhm, F. G. Rammerstorfer, V.A. Buryachenko, G. Hackl:
    "Modeling of Layer-Structured High Speed Steel";
    Acta Materialia, 45 (1997), 5; 1875 - 1887.

  59. A.F. Plankensteiner, H. J. Böhm, F. G. Rammerstorfer, V.A. Buryachenko:
    "Hierarchical Modeling of the Mechanical Behavior of High Speed Steels as Layer-Structured Particulate MMCs";
    Journal de Physique IV, 6 (1996), C6; 395 - 402.

  60. H. J. Böhm, H.P. Degischer, W. Lacom:
    "Experimental and Theoretical Study of the Thermal Expansion Behavior of Ceramic Fiber Reinforced Aluminium;";
    Composites Engineering, 5 (1995), 1; 37 - 49.

  61. H. E. Pettermann, H. J. Böhm:
    "Effective Thermoelastic Behavior of Composites with a Given Orientation Distribution of Inclusions";
    ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, 75 (1995), Supplement 1; 161 - 162.

  62. K. Tanaka, D. Hasegawa, H. J. Böhm, F.D. Fischer:
    "Overall Thermomechanical Behavior of Shape Memory Alloys: A Micromechanical Approach Based on Mean Field Theory";
    Materials Science Research International, 1 (1995), 1; 23 - 30.

  63. H. J. Böhm, F.D. Fischer, F. G. Rammerstorfer, T. Siegmund:
    "Microscale Arrangement Effects on the Thermomechanical Behavior of Advanced Two-Phase Composites";
    Journal of Engineering Materials and Technology, 116 (1994), 3; 268 - 273.

  64. T.J. Reiter, H. J. Böhm, W. Krach, M. Pleschberger, F. G. Rammerstorfer:
    "Some Applications of the Finite Element Method in Biomechanical Stress Analysis";
    International Journal of Computer Applications in Technology, 7 (1994), 3-6; 233 - 241.

  65. E. Weissenbek, H. J. Böhm, F. G. Rammerstorfer:
    "Micromechanical Investigations of Arrangement Effects in Particle Reinforced Metal Matrix Composites";
    Computational Materials Science, 3 (1994), 2; 263 - 278.

  66. H. J. Böhm:
    "Numerical Investigation of Microplasticity Effects in Unidirectional Longfiber Reinforced Metal Matrix Composites";
    Modelling and Simulation in Materials Science and Engineering, 1 (1993), 649 - 671.

  67. H. J. Böhm, F. G. Rammerstorfer, E. Weissenbek:
    "Some Simple Models for Micromechanical Investigations of Fiber Arrangement Effects in MMCs";
    Computational Materials Science, 1 (1993), 3; 177 - 194.

  68. F. G. Rammerstorfer, F.D. Fischer, H. J. Böhm, W. Daves:
    "Computational Micromechanics of Multiphase Materials";
    Computers and Structures, 44 (1992), 1-2; 453 - 458.

  69. H. J. Böhm, F. G. Rammerstorfer:
    "Micromechanical Investigation of the Processing and Loading of Fiber Reinforced Metal Matrix Composites";
    Materials Science and Engineering A, A135 (1991), 185 - 188.

  70. G. Mailath-Pokorny, H. E. Pettermann, H. J. Böhm, D. Scheidle, W. Lill, G. Watzek:
    "Zur Biomechanik der transdentalen Fixation";
    Zeitschrift für zahnärztliche Implantologie, 7 (1991), 138 - 143.

  71. T.J. Reiter, F. G. Rammerstorfer, H. J. Böhm:
    "Zur numerischen Prognose spannungsbedingter Knochenumbildungen";
    ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, 71 (1991), 693 - 697.

  72. A.J. Svobodnik, H. J. Böhm, F. G. Rammerstorfer:
    "A 3/D Finite Element Approach for Metal Matrix Composites Based on Micromechanical Models";
    International Journal of Plasticity, 7 (1991), 8; 781 - 802.

  73. H. J. Böhm, F. G. Rammerstorfer, R. Schmid, A. Starlinger, R. Slavicek:
    "Numerical Modelling and Nonlinear Analysis of the Behaviour of Maxillary Partial Denture";
    Engineering Computations, 7 (1990), 4; 338 - 343.

  74. F. G. Rammerstorfer, K. Dorninger, H. J. Böhm, F. Zerobin:
    "Analysis of Frictional Contact Problems in High Field Superconducting Magnets for Hadron Collider";
    Computers and Structures, 32 (1989), 3/4; 787 - 795.

  75. F. Bauer, H. J. Böhm, F.D. Fischer, F. G. Rammerstorfer:
    "Finite Element Analysis of Drastic Shape Changes of Cylinders Due to Thermal Cycling";
    Computers and Structures, 26 (1987), 263 - 274.

  76. F. G. Rammerstorfer, K. Scharf, H. J. Böhm:
    "Eine kritische Betrachtung der Schubfeldtheorie";
    ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, 67 (1987), 133 - 136.

  77. W. Schneider, E. Zauner, H. J. Böhm:
    "The Recirculatory Flow Induced by a Laminar Axisymmetric Jet Issuing from a Wall";
    Journal of Fluids Engineering, 109 (1987), 237 - 241.


Contributions to Books


  1. H. J. Böhm:
    "Micromechanics";
    in: "Encyclopedia of Continuum Mechanics", H. Altenbach, A. Öchsner (ed.); Springer, Berlin, Heidelberg, 2018, ISBN: 978-3-662-53605-6, 8 pages.

  2. H. J. Böhm, H. E. Pettermann, S. Nogales:
    "Continuum Modeling of Diffusive Transport in Inhomogeneous Solids";
    in: "Heat Transfer in Multi-Phase Materials", A. Öchsner, G.E. Murch (ed.); Springer-Verlag, Berlin, 2011, ISBN: 978-3642044021, 3 - 32.

  3. H. J. Böhm, D. H. Pahr, T. Daxner:
    "Analytical and Numerical Methods for Modeling the Thermomechanical and Thermophysical Behavior of Microstructured Materials";
    in: "Computational and Experimental Mechanics of Advanced Materials", V.V. Silberschmidt (ed.); issued by: CISM; Springer-Verlag, Wien, 2009, ISBN: 978-3-211-99684-3, 167 - 223.

  4. F. G. Rammerstorfer, B. Hößl, H.E. Dechant, H. J. Böhm, F.G. Barth:
    "Computational Biomechanics of Sensory Organs in Spiders";
    in: "Trends in Engineering Computational Technology", B.H.V. Topping, M. Papadrakakis (ed.); Saxe-Coburg Publications, 2008, ISBN: 978-1-874672-36-4, 321 - 334.

  5. H. J. Böhm:
    "A Short Introduction to Continuum Micromechanics";
    in: "Mechanics of Microstructured Materials", H. J. Böhm (ed.); issued by: CISM; Springer-Verlag, Wien, 2004, ISBN: 3-211-24154-x, 1 - 40.

  6. H. J. Böhm:
    "Modeling the Mechanical Behavior of Short Fiber Reinforced Composites";
    in: "Mechanics of Microstructured Materials", H. J. Böhm (ed.); issued by: CISM; Springer-Verlag, Wien, 2004, ISBN: 3-211-24154-x, 41 - 56.

  7. T. Daxner, H. J. Böhm, F. G. Rammerstorfer, M. Seitzberger:
    "Modeling of Cellular Materials";
    in: "Handbook of Cellular Metals", H.P. Degischer, B. Kriszt (ed.); Wiley-VCH, Weinheim, 2002, ISBN: 3-527-30339-1, 245 - 280.

  8. F. G. Rammerstorfer, T. Daxner, H. J. Böhm:
    "Modeling and Simulation - Introduction";
    in: "Handbook of Cellular Metals", H.P. Degischer, B. Kriszt (ed.); Wiley-VCH, Weinheim, 2002, ISBN 3-527-39339-1, 243 - 245.

  9. F. G. Rammerstorfer, H. J. Böhm:
    "Finite Elements in Micromechanics of Composite and Foam Materials";
    in: "Computational Mechanics for the Twenty-First Century", B.H.V. Topping (ed.); Saxe-Coburg Publications, Edinburgh, 2000, ISBN: 1-874672-13-x, 145 - 164.

  10. H. J. Böhm:
    "Description of Thermoelastic Composites by a Mean Field Approach";
    in: "Engineering Mechanics of Fibre Reinforced Polymers and Composite Structures"", J. Hult, F. G. Rammerstorfer (ed.); Springer-Verlag, Wien, 1994, ISBN: 3-211-82652-1, 51 - 72.

  11. F. G. Rammerstorfer, H. J. Böhm:
    "Micromechanics for Macroscopic Material Description of FRPs";
    in: "Engineering Mechanics of Fibre Reinforced Polymers and Composite Structures", J. Hult, F. G. Rammerstorfer (ed.); issued by: CISM Courses and Lectures No. 348; Springer-Verlag, Wien New York, 1994, 9 - 49.

  12. T.J. Reiter, F. G. Rammerstorfer, H. J. Böhm:
    "Numerical Simulation of Internal and Surface Bone Remodelling";
    in: "Engineering Optimization in Design Processes", H.A. Eschenauer, C. Matthek, N. Olhoff (ed.); issued by: Lecture Notes in Engineering, 63; Springer-Verlag, Berlin, 1991, 333 - 340.


Contributions to Proceedings


  1. A.Y. Matveeva, H. J. Böhm, F.W.J. van Hattum:
    "Seminanalytical Stiffness Tensor Approximation for Polymers Reinforced with Curved Nanotubes";
    in: "Proceedings of Composites Week at Leuven 2013 and TexComp-11 Conference", A.W. van Vuure (ed.); Katholieke Universiteit Leuven, Leuven, 2013, 8 pages.

  2. T. Daxner, R.D. Bitsche, H. J. Böhm:
    "Micromechanical Models of Metallic Sponges with Hollow Struts";
    in: "Thermec 2006, Materials Science Forum Vols. 539-543", T. Chandra, K. Tsuzaki, C. Ravindran, M. Militzer (ed.); Trans Tech Publications Ltd., Zürich, 2007, ISBN: 0-87849-428-6, 1857 - 1862.

  3. T. Daxner, R.D. Bitsche, H. J. Böhm:
    "Space-Filling Polyhedra as Mechanical Models for Solidified Dry Foam";
    in: "Porous Metals and Metal Foaming Technology", H. Nakajima, N. Kanetake (ed.); The Japan Institute of Metals, Sendai, 2006, ISBN: 4-88903-405-6, 441 - 446.

  4. T. Drabek, H. J. Böhm:
    "Simulation of Ductile Damage in Metal Matrix Composites";
    in: "Proceedings of the NUMIFORM 2004", S. Ghosh, J.M. Castro, J.K. Lee (ed.); American Institute of Physics, Melville, NY, 2004, ISBN: 0-7354-0189-6, Paper ID N064, 6 pages.

  5. T. Drabek, H. J. Böhm:
    "Unit Cell Studies of Ductile Damage in Fiber Reinforced Metal Matrix Composites";
    in: "Proceedings of ECCOMAS 2004", P. Neittaanmäki, M. Rossi, K. Majava, O. Pironneau (ed.); issued by: ECCOMAS; University of Jyväskylä, Jyväskylä, 2004, ISBN: 951-39-1868-8, Paper ID 94, 13 pages.

  6. D. H. Pahr, C. Marte, F. G. Rammerstorfer, H. J. Böhm:
    "Hierarchical Modelling of Perforated Woven Fabric Laminates";
    in: "Proceedings of ECCOMAS 2004", P. Neittaanmäki, M. Rossi, S. Korotov, E. Oñate, J. Périaux, D. Knörzer (ed.); issued by: ECCOMAS; University of Jyväskylä, Jyväskylä, 2004, ISBN: 951-39-1869-6, Paper ID 863, 17 pages.

  7. H. J. Böhm:
    "Kontinuumsmodelle zur Beschreibung des thermomechanischen Verhaltens diskontinuierlich verstärkter Materialien";
    in: "Verbundwerkstoffe", H.P. Degischer (ed.); issued by: DGM; Wiley-VCH, Weinheim, 2003, ISBN: 3-527-30762-1, 45 - 54.

  8. T. Daxner, H. J. Böhm, F. G. Rammerstorfer:
    "Numerical Investigation of Local Yielding in Metallic Foams";
    in: "Cellular Metals - Manufacture, Properties, Applications", J. Banhart, N. A. Fleck, A. Mortensen (ed.); Verlag MIT Publishing, Bremen, 2003, ISBN: 3-935538-12-x, 413 - 418.

  9. D. Duschlbauer, H. E. Pettermann, H. J. Böhm:
    "Rechnerische Simulation der Wärmeleitungseigenschaften von MMCs mit spezieller Berücksichtigung eines thermischen Widerstandes am Interface";
    in: "Verbundwerkstoffe", H.P. Degischer (ed.); issued by: DGM; Wiley-VCH, Weinheim, 2003, ISBN: 3-527-30762-1, 555 - 562.

  10. H. J. Böhm, T. Drabek, A. Eckschlager:
    "Continuum Mechanical Unit Cell Models for Studying the Thermomechanical Behavior of High Speed Tool Steels";
    in: "The Use of Tool Steels: Experience and Research", J. Bergström, G. Fredriksson, M. Johansson, O. Kotik, F. Thuvander (ed.); Karlstad University, Karlstad, Sweden, 2002, ISBN: 91-89422-81-3, 415 - 424.

  11. C. Motz, R. Pippan, A. Ableidinger, H. J. Böhm, F. G. Rammerstorfer:
    "Deformation and Fracture Behavior of Ductile Aluminium Foams in the Presence of Notches under Tensile Loading";
    in: "Cellular Metals and Metal Foaming Technology", J. Banhart, M.F. Ashby, N. A. Fleck (ed.); Verlag MIT Publishing, Bremen, 2001, 299 - 304.

  12. D. H. Pahr, T. Daxner, F. G. Rammerstorfer, H. J. Böhm:
    "On Micro/Meso/Macro Modeling of Composite Lightweight Materials and Structures";
    in: "Computational Mechanics: New Frontiers for the New Millenium", S. Valliappan, N. Khalili (ed.); Elsevier, Amsterdam, 2001, ISBN: 00-80439-81-0, 753 - 762.

  13. H. J. Böhm, A. Eckschlager, W. Han, F. G. Rammerstorfer:
    "3/D Arrangement Effects in Particle Reinforced Metal Matrix Composites";
    in: "Plastic and Viscoplastic Response of Materials and Metal Forming", A.S. Khan, H. Zhang, Y. Yuan (ed.); NEAT Press, Fulton, MD, 2000, 466 - 468.

  14. H. J. Böhm, C.M. Chimani, H. E. Pettermann, A.F. Plankensteiner, F. G. Rammerstorfer:
    "Multiscale Treatment of Inhomogeneous Materials by Finite Elements";
    in: "Discretization Methods in Structural Mechanics", H.A. Mang, F. G. Rammerstorfer (ed.); Kluwer Academic Publishers, Dordrecht, 1999, ISBN: 978-0-7923-5591-5, 257 - 264.

  15. T. Daxner, H. J. Böhm, F. G. Rammerstorfer:
    "Influence of Micro- and Meso-Topological Properties on the Crash-Worthiness of Aluminium Foams";
    in: "Metal Foams and Porous Metal Structures", J. Banhart, M.F. Ashby, N. A. Fleck (ed.); Verlag MIT Publishing, Bremen, 1999, 283 - 288.

  16. R.B. Stewart, F. Marketz, W.C.M. Lohbeck, F.D. Fischer, W. Daves, F. G. Rammerstorfer, H. J. Böhm:
    "Expandable Wellbore Tubulars";
    in: "Proceedings of the 1999 SPE Technical Symposium", Society of Petroleum Engineers, Dubai, 1999, ISBN: 978-1-61399-106-0.

  17. C.M. Chimani, H. J. Böhm, F. G. Rammerstorfer, C. Hausmann:
    "Free Edge Effects at Interfaces in Selectively Reinforced Structures";
    in: "Damage and Failure of Interfaces", Hp Rossmanith (ed.); A.A. Balkema, Rotterdam, 1997, ISBN: 90-5410-899-1, 91 - 98.

  18. H. J. Böhm, F. G. Rammerstorfer:
    "Influence of the Micro-Arrangement on Matrix and Fiber Damage in Continuously Reinforced MMCs";
    in: "Micromechanics of Plasticity and Damage of Multiphase Materials", A. Pineau, A. Zaoui (ed.); Kluwer Academic Publishers, Dordrecht, 1996, ISBN: 978-0-7923-4188-8, 19 - 26.

  19. V.A. Buryachenko, H. J. Böhm, F. G. Rammerstorfer:
    "Modeling the Overall Elastoplastic Behavior of Multiphase Materials by the Effective Field Method";
    in: "Micromechanics of Plasticity and Damage of Multiphase Materials", A. Pineau, A. Zaoui (ed.); Kluwer Academic Publishers, Dordrecht, 1996, ISBN: 978-0-7923-4188-8, 35 - 42.


Talks and Poster Presentations (with Proceedings-Entry)


  1. M. Bartosik, M. Todt, H. Riedl, C.M. Koller, R. Rachbauer, H. J. Böhm, P.H. Mayrhofer:
    "Thermo-mechanically Optimized Multilayer Thin Films";
    Talk: 42nd International Conference on Metallurgical Coatings and Thin Films (ICMCTF), San Diego, CA; 2015-04-20 - 2015-04-24; in: "Book of abstracts", (2015), 82.

  2. T. Palau, A. Kuhn, S. Nogales, H. J. Böhm, A. Rauh:
    "A Neural Network Based Elasto-Plasticity Material Model";
    Talk: ECCOMAS 2012 (European Congress on Computational Methods in Applied Sciences and Engineering, Wien (invited); 2012-09-10 - 2012-09-14; in: "CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)", J. Eberhardsteiner, H. J. Böhm, F. G. Rammerstorfer (ed.); TU Wien, Wien (2012), ISBN: 978-3-9502481-9-7; Paper ID 3112, 10 pages.

  3. H. J. Böhm, A. Rasool:
    "Particle Shape Effects on Global and Local Behavior of Particle Reinforced Composites";
    Talk: MFO-Workshop #1212, Mechanics of Materials, Oberwolfach (invited); 2012-03-18 - 2012-03-24; in: "Mechanics of Materials", R. Kienzler, D.L. McDowell, S. Müller, E.A. Werner (ed.); Mathematisches Forschungsinstitut Oberwolfach, Report 15/2012 (2012), 3 pages.

  4. A. Kuhn, T. Palau, G. Schlager, H. J. Böhm, S. Nogales, V. Oancea, R. Roy, A. Rauh, J. Lescheticky:
    "CoMModO - Complex Material Modelling Operations: A Comprehensive Approach to the Modelling of Complex Materials with Machine Learning Models within Finite Element Simulations";
    Talk: 10th International Conference on Modeling and Applied Simulation (MAS2011), Rom; 2011-09-12 - 2011-09-14; in: "Proceedings of the 10th International Conference on Modeling and Applied Simulation,", A.G. Bruzzone, C. Frydman, M. Massei, M. McGinnis, M.A. Piera, G. Zacharewicz (ed.); Universitá di Genova, Genoa, (2011), ISBN: 978-88-903724-5-2; 80 - 89.

  5. A. Rasool, H. J. Böhm:
    "A Study of Thermo-Mechanical Properties of Composite Materials Reinforced with Polyhedral Shaped Particles";
    Poster: Junior Scientist Conference 2010, Wien; 2010-04-07 - 2010-04-09; in: "Proceedings of the Junior Scientist Conference 2010", H. Kaiser, R. Kirner (ed.); (2010), ISBN: 978-3-200-01797-9; 147 - 148.

  6. H. E. Pettermann, C.O. Huber, M.H. Luxner, S. Nogales, H. J. Böhm:
    "An Incremental Mori-Tanaka Approach for Finite Strain Elastoplasticity of Particulate MMCs";
    Talk: Plasticity '10: The Sixteenth International Symposium on Plasticity and its Current Applications, St. Kitts; 2010-01-03 - 2010-01-08; in: "Proceedings of Plasticity '10", A.S. Khan, B. Farrokh (ed.); NEAT Press, Fulton, MD, (2010), ISBN: 0-9659463-2-0; 133 - 135.

  7. H. J. Böhm, D. H. Pahr, S. Nogales, M. B. Gándara:
    "Comparison of Unit Cell and Windowing Methods for Obtaining Estimates on Macroscopic Elasticity Tensors of Inhomogeneous Materials";
    Talk: EASEC-11: 11th East Asia-Pacific Conference on Structural Engineering and Construction, Taipei (invited); 2008-11-19 - 2008-11-21; in: "Proceedings of the 11th East Asia-Pacific Conference on Structural Engineering and Construction", Y.B. Yang, L.J. Leu, C.S. Chen, P.C. Su (ed.); National Taiwan University, (2008), ISBN: 978-986-80222-4-9; Paper ID B11_06, 5 pages.

  8. H. J. Böhm, S. Nogales:
    "Analytical and Numerical Modelling of the Thermomechanical and Thermophysical Behavior of Discontinuously Reinforced Composites";
    Talk: Taiwan-Austria Joint Workshop on Computational Mechanics of Materials and Structures, Taipei (invited); 2008-11-15 - 2008-11-17; in: "Proceedings of the Taiwan-Austria Joint Workshop on Computational Mechanics of Materials and Structures", Y.B. Yang (ed.); National Taiwan University, (2008), 33 - 36.

  9. D. H. Pahr, H. J. Böhm:
    "Assessment of Mixed Uniform Boundary Conditions for Predicting the Macroscopic Mechanical Behavior of Composite Materials";
    Talk: ECCM 13 - 13th European Conference on Composite Materials, Stockholm; 2008-06-02 - 2008-06-05; in: "Proceedings of ECCM 13", (2008), Paper ID 1216, 10 pages.

  10. C.O. Huber, M.H. Luxner, S. Kremmer, S. Nogales, H. J. Böhm, H. E. Pettermann:
    "Forming Simulations of MMC Components by a Micromechanics Based Hierarchical FEM Approach";
    Talk: NUMIFORM 07, Porto; 2007-06-17 - 2007-06-21; in: "Numiform 07 - Materials Processing and Design: Modeling, Simulation and Applications", J.M.A.C. de Sá, A.D. Santos (ed.); American Institute of Physics, (2007), ISBN: 978-0-7354-0416-8; Paper ID 1351, 6 pages.

  11. A. Starlinger, P. Casagrande, H. J. Böhm:
    "Die Entwicklung einer automatisierten Auswerteroutine zur Ermüdungsauswertung von Schienenfahrzeugkomponenten";
    Talk: 33. Tagung des DVM-Arbeitskreises Betreibsfestigkeit, Steyr; 2006-10-11 - 2006-10-12; in: "Betriebsfestigkeit in der virtuellen Produktentwicklung", C.M. Sonsino (ed.); (2006), ISSN: 0944-5242; 291 - 295.

  12. B. Hößl, H. J. Böhm, F. G. Rammerstorfer, F.G. Barth:
    "Mechanoreception in the Exoskeleton of Arachnids: Engineering Meets Biology";
    Talk: Third IASTED International Conference on Biomechanics, Benidorm; 2005-09-07 - 2005-09-09; in: "Proceedings of the Third IASTED International Conference on Biomechanics", M.H. Hamza (ed.); IASTED Acta Press, Anaheim, CA (2005), ISBN: 0-88986-534-5; Paper ID 485-088, 5 pages.

  13. D. Duschlbauer, H. J. Böhm, H. E. Pettermann:
    "Short Fiber Metal Matrix Composites under Temperature Load - Local Stresses and Global Deformations";
    Talk: Sixth International Congress on Thermal Stresses, Wien; 2005-05-26 - 2005-05-29; in: "Thermal Strress 2005: Proceedings of the Sixth International Congress on Thermal Stresses", F. Ziegler, R. Heuer, C. Adam (ed.); (2005), ISBN: 3-901167-12-9; 759 - 762.

  14. D. H. Pahr, H. J. Böhm:
    "Modelling Residual Stresses of Perforated Woven Laminates Using FEM";
    Talk: Sixth International Congress on Thermal Stresses, Wien; 2005-05-26 - 2005-05-29; in: "Proceedings of the Sixth International Congress on Thermal Stresses", F. Ziegler, R. Heuer, C. Adam (ed.); (2005), ISBN: 3-901167-12-9; 787 - 790.

  15. H. J. Böhm, T. Drabek:
    "Implementierung nichtlokaler duktiler Schädigungsmodelle in ABAQUS/Standard";
    Talk: ABAQUS Austria Anwenderkonferenz 2004, Linz; 2004-09-27 - 2004-09-28; in: "ABAQUS Austria Anwenderkonferenz 2004", ABAQUS Inc., Providence, RI, (2004), 12 pages.

  16. H. J. Böhm, D. Duschlbauer, T. Drabek, C.M. Chimani:
    "Finite Element Based Micromechanical Model of Ductile Intergranular Cracks in Columnar Two-Phase System";
    Talk: WCCM VI, Beijing; 2004-09-05 - 2004-09-10; in: "Computational Mechanics. Proceedings of the Sixth World Congress on Computational Mechanics", Z.H. Yao, M.W. Yuan, W.X. Zhong (ed.); (2004), ISBN: 7-89494-512-9; Paper ID 258, 10 pages.

  17. T. Drabek, H. J. Böhm:
    "Implementation of Nonlocal Damage Models in Commerical FE-Codes";
    Talk: WCCM VI, Beijing; 2004-09-05 - 2004-09-10; in: "Computational Mechanics. Proceedings of the Sixth World Congress on Computational Mechanics", Z.H. Yao, M.W. Yuan, W.X. Zhong (ed.); (2004), ISBN: 7-89494-512-9; Paper ID 262, 10 pages.

  18. D. Duschlbauer, H. J. Böhm, H. E. Pettermann:
    "Composites with planar random fiber arrangements";
    Talk: XXI International Congress of Theoretical and Applied Mechanics, Warschau; 2004-08-15 - 2004-08-21; in: "Proceedings of the XXI International Congress of Theorectical and Applied Mechanics", W. Gutkowski, T.A. Kowalewski (ed.); IPPT PAN, Warschau (2004), ISBN: 83-89687-01-1; Paper ID SM13_12321, 2 pages.

  19. H. J. Böhm, D. Duschlbauer, T. Drabek, O. Kolednik, C.M. Chimani, G.X. Shan:
    "Numerical Studies of Crack Sensitivity under Continuous-Casting Conditions";
    Talk: VAI Continuous Casting and Hot Rolling Conference CCR'04, Linz (invited); 2004-06-14 - 2004-06-15; in: "Proceedings of the VAI Continuous Casting and Hot-Rolling Conference CCR'04", (2004), 1 - 8.

  20. A. F. Plankensteiner, D. Duschlbauer, O. Coube, H. E. Pettermann, H. J. Böhm:
    "Numerical and Experimental Analysis of Pore Shape Evolution of Sintered Molybdenum under Triaxial Loading Condition";
    Talk: Pm Tec 2003, Las Vegas, NV; 2003-07-08 - 2003-07-12; in: "Advances in Powder Metallurgy and Particulate Metals - 2003", MPIF, Princeton, NJ, (2003), ISBN: 1-878954-96-2; 108 - 119.

  21. A. Eckschlager, H. J. Böhm:
    "3D Finite Element Unit Cell Study of Particle Failure in Brittle Particle Reinforced Ductile Matrix Composites";
    Talk: Fifth World Congress on Compuational Mechanics (WCCM V), Wien; 2002-07-07 - 2002-07-12; in: "Proceedings of the Fifth World Congress on Compuational Mechanics (WCCM V)", H.A. Mang, F. G. Rammerstorfer, J. Eberhardsteiner (ed.); TU Wien, Wien (2002), ISBN: 3-9501554-0-6.

  22. H. J. Böhm, W. Han, A. Eckschlager:
    "Multi-Inclusion Unit Cell Studies of the Thermomechanical Behavior of Discontinuously Reinforced Ductile Matrix Composites";
    Talk: International Conference on Computational Engineering & Sciences, Puerto Vallarta, Mexico; 2001-08-19 - 2001-08-25; in: "Advances in Computational Engineering & Sciences. Proceedings of the ICES'01", S.N. Atluri, T. Nishioka, M. Kikuchi (ed.); Tech Science Press, (2001), Paper ID # 95.

  23. A. Eckschlager, W. Han, H. J. Böhm:
    "Modeling of Brittle Particle Fracture in Particle Reinforced Ductile Matrix Composites by 3D-Unit Cells";
    Talk: 13th International Conference on Composite Materials (ICCM-13), Beijing; 2001-06-25 - 2001-06-29; in: "Proceedings of the ICCM-13", Y. Zhang (ed.); Scientific and Technical Documents Publishing House, (2001), ISBN: 7-900075-46-1; Paper ID # 1342.

  24. W. Han, A. Eckschlager, H. J. Böhm:
    "Numerical Modeling of Discontinuously Reinforced Metal Matrix Composites by Three-Dimensional Multi-Inclusion Unit Cells";
    Talk: 13th International Conference on Composite Materials (ICCM-13), Beijing; 2001-06-25 - 2001-06-29; in: "Proceedings of the 13th International Conference on Composite Materials", Y. Zhang (ed.); Scientific and Technical Documents Publishing House, Beijing (2001), ISBN: 7-900075-46-1; Paper ID # 1222.

  25. W. Han, H. J. Böhm:
    "Numerical Study on the Influence of Thermal Residual Stresses in Metal Matrix Composites Using 3/D Multi-Inclusion Unit Cells";
    Talk: Thermal Stresses 2001, Osaka; 2001-06-08 - 2001-06-11; in: "Thermal Stresses 2001", Y. Tanigawa, R.B. Hetnarski, N. Noda (ed.); Osaka Prefecture University, Japan (2001), 319 - 322.


Talks and Poster Presentations (without Proceedings-Entry)


  1. H. J. Böhm:
    "Application of Numerical Methods to Continuum Micromechanics";
    Talk: CISM Course C1902 "Micromechanics of Internal Stresses in Multiphase Materials", Udine (invited); 2019-05-20 - 2019-05-24.

  2. H. J. Böhm:
    "A short tour through continuum micromechanics and multiscale modeling of inhomogeneous materials";
    Keynote Lecture: 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019), Vienna (invited); 2019-02-18 - 2019-02-22.

  3. H. J. Böhm:
    "Remarks on Mean-Field Modeling of the Elastic Behavior of Composites Reinforced by Coated Particles";
    Talk: 55th Annual Technical Meeting of the Society of Engineering Science, Madrid; 2018-10-10 - 2018-10-12.

  4. A. Wagner, M. Nagler, M. Bartosik, H. J. Böhm, M. Todt:
    "Efficient Numerical And Analytical Modelling Of Residual Stresses In Multilayer Coatings";
    Poster: Materials Science and Engineering - MSE 2018, Darmstadt; 2018-09-26 - 2018-09-28.

  5. M. Todt, A. Wagner, M. Nagler, M. Bartosik, H. J. Böhm:
    "Finite Element Simulation and Analytical Estimation of Eigenstresses in Thin-Film-Substrate Systems";
    Talk: 89th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), München, Germany; 2018-03-19 - 2018-03-23.

  6. H. J. Böhm:
    "Effects of the Shape of Equiaxed Polyhedral Inhomogeneities on the Behavior of Inhomogeneous Materials with Matrix-Inclusion Microtopology";
    Talk: SST/IMMC/MEMA-Seminar, UC Louvain, Louvain-la-Neuve (invited); 2017-12-18.

  7. H. J. Böhm:
    "Study on Pore Shape Effects on Mechanical and Conduction Properties of Porous Materials";
    Talk: 27th International Workshop on Computational Mechanics of Materials (IWCMM27), Leuven; 2017-09-20 - 2017-09-22.

  8. M. Todt, M. Nagler, A. Wagner, M. Bartosik, P.H. Mayrhofer, H. J. Böhm:
    "Simulation of the Thermo-Mechanical Behavior of Multi-Layer Thin Film-Substrate Systems";
    Talk: IEA AMT Executive Committee Meeting, Wiener Neustadt; 2017-06-02.

  9. M. Nagler, A. Wagner, M. Bartosik, M. Todt, H. J. Böhm:
    "Analytical and Numerical Simulation of Residual Stresses in Multilayer Coatings";
    Talk: Vienna Young Scientists Symposium VSS 2017, Wien; 2017-06-01 - 2017-06-02.

  10. M. Todt, M. Bartosik, H. J. Böhm, F. G. Rammerstorfer, P.H. Mayrhofer:
    "Influence of Undulations on the Thermo-Mechanical Behavior of Thin Film-Substrate Systems";
    Talk: Joint Annual Meeting of DMV and GAMM 2016, Braunschweig; 2016-03-07 - 2016-03-11.

  11. H. J. Böhm:
    "Computational Micromechanics";
    Talk: First Summer School on Micromechanics, Rzeszow/Bezmiechowa (invited); 2015-06-03 - 2015-06-13.

  12. H. J. Böhm:
    "Particle Shape Effects in Particle Reinforced Composites";
    Keynote Lecture: Euromech Colloquium 577 - Micromechanics of Metal Ceramic Composites, Stuttgart (invited); 2015-03-02 - 2015-03-15.

  13. H. J. Böhm:
    "Inhomogeneities Embedded in a Matrix Consisting of Grains Having a Length Scale Comparable to that of the Inhomogeneities - Some Simple Models";
    Keynote Lecture: 24th International Workshop on Micromecahnics of Materials, Madrid (invited); 2014-10-01 - 2014-10-03.

  14. H. J. Böhm:
    "Simple Numerical Models of Inhomogeneities in Elastic Matrices with Grain Structure";
    Keynote Lecture: Advances in Micromechanics of Materials, Rzeszow (invited); 2014-07-08 - 2014-07-11.

  15. H. J. Böhm:
    "Some Simple Models for Studying the Influence of the Shapes of Equiaxed Particles on the Thermomechanical Response of Composites";
    Talk: 1st International Workshop on Software Solutions for ICME, Rolduc (invited); 2014-06-24 - 2014-06-27.

  16. H. J. Böhm:
    "Particle Shape Effects in Particle Reinforced Composites";
    Talk: LM2 Seminar, Ecole Polytecnique de Montréal, Montréal (invited); 2013-04-05.

  17. H. J. Böhm:
    "Particle Shape Effects in Ductile Matrix Composites";
    Talk: 25th International Workshop Research in Mechanics of Composites, Bad Herrenalb; 2012-12-06 - 2012-12-07.

  18. A. Kuhn, T. Palau, H. J. Böhm, S. Nogales, V. Oancea, R. Roy, J. Lescheticky, A. Rauh:
    "CoMModO - Complex Material Modelling Operations";
    Talk: SIMULIA Austria Regional Users Meeting 2011, Salzburg; 2011-11-15.

  19. H. J. Böhm, A. Bartolomé Chavert, P.H. Mayrhofer, F.D. Fischer:
    "Elastic Strain Energies of Transforming Ternary Coatings";
    Talk: 21st International Workshop on Computational Mechanics of Materials (IWCMM 21), Limerick; 2011-08-22 - 2011-08-24.

  20. H. J. Böhm, A. Rasool:
    "Influence of Particle Shape on the Behavior of Particle Reinforced Composites";
    Keynote Lecture: Influence of Particle Shape on the Behavior of Particle Reinforced Composites, Chicago, IL (invited); 2011-05-30 - 2011-06-01.

  21. H. J. Böhm, A. Rasool:
    "Modeling of Effects of Particle Shape on the Thermomechanical and Thermophysical Behaviors of Particle Reinforced Composites";
    Talk: Kolloquium über Werkstoffmodellierung, Stuttgart (invited); 2010-11-25.

  22. A. Kuhn, H. J. Böhm, A. Szadeczky, A. Rauh:
    "CoMModO: Comples Material Modeling Operations";
    Talk: SIMULIA Austria Regional User's Conference 2010, Wien; 2010-11-08 - 2010-11-09.

  23. H. J. Böhm, P.H. Mayrhofer, F.D. Fischer:
    "Spannungs- und Dehnungsfelder durch Phasenumwandlungen in Einschlüssen in Beschichtungen";
    Talk: Werkstoffkongress 2010, Leoben; 2010-11-04 - 2010-11-05.

  24. H. E. Pettermann, C.O. Huber, M.H. Luxner, S. Nogales, H. J. Böhm:
    "Multiskalenmodellierung von MMC-Komponenten unter großen Verzerrungen";
    Talk: Werkstoffkongress 2010, Leoben (invited); 2010-11-04 - 2010-11-05.

  25. A. Rasool, H. J. Böhm:
    "Thermomechanical Behavior of Composites Reinforced by Spherical and Non-Spherical Particles";
    Talk: 20th International Workshop on Computational Mechanics of Materials (IWCMM 20), Loughborough, UK; 2010-09-08 - 2010-09-10.

  26. H. J. Böhm:
    "Continuum Micromechanics Modeling of Composite, Porous and Cellular Materials";
    Talk: Workshop CompMat 2009, Schlaining; 2009-10-01 - 2009-10-02.

  27. T. Daxner, R.W. Tomas, H. J. Böhm:
    "Strength Prediction for Semi-Expanded Sintered Hollow Sphere Structures";
    Talk: MetFoam 2009, Bratislava; 2009-09-01 - 2009-09-04.

  28. H. E. Pettermann, C.O. Huber, M.H. Luxner, S. Nogales, H. J. Böhm:
    "MMC Parts under Finite Elastoplasticity - Mean Field and Unit Cell Simulations";
    Talk: 3. GAMM-Seminar on Multiscale Material Modelling, Karlsruhe; 2009-06-26 - 2009-06-27.

  29. S. Nogales, D. Duschlbauer, H. E. Pettermann, H. J. Böhm:
    "Analytical and Numerical Modelling of Composites Containing Reinforcements with Finite Interfacial Conductances";
    Talk: 5th International Conference on Diffusion in Solids and Liquids (DSL 2009), Rom (invited); 2009-06-24 - 2009-06-26.

  30. H. J. Böhm, D. H. Pahr:
    "On Modeling the Behavior of Non-Periodic Inhomogeneous Volume Elements";
    Talk: 21. Workshop Composite-Forschung in der Mechanik, Bad Herrenalb (invited); 2008-12-01 - 2008-12-03.

  31. H.P. Degischer, M. Schöbel, H. J. Böhm, S. Nogales, C. Edtmaier:
    "MMC-characterisation and Modelling";
    Talk: Extremat-Meeting, Saclay; 2008-10-20 - 2008-10-22.

  32. H. J. Böhm:
    "Mathematische Modellierung des Verhaltens von Verbundwerkstoffen";
    Talk: 2. Bayerischer Werkstoffabend, Garching; 2008-10-16.

  33. H. J. Böhm, D. H. Pahr, T. Daxner:
    "Analytical and Numerical Methods for Modeling the Thermomechanical and Thermophysical Behavior of Microstructured Materials";
    Talk: CISM Course "Computational and Experimental Mechanics of Advanced Materials", Udine (invited); 2008-09-08 - 2008-09-12.

  34. F. G. Rammerstorfer, B. Hößl, H.E. Dechant, H. J. Böhm, F.G. Barth:
    "Computational Biomechanics of Sensory Organs in Spiders";
    Keynote Lecture: Sixth International Conference on Engineering Computational Technology (ECT2008), Athen (invited); 2008-09-02 - 2008-09-05.

  35. H. E. Pettermann, S. Nogales, C.O. Huber, M.H. Luxner, H. J. Böhm:
    "Micromechanics Based Structural Analysis of MMC Components under Finite Strains";
    Talk: 8th World Congress on Computational Mechanics (WCCM8) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), Lido di Venezia; 2008-06-30 - 2008-07-04.

  36. H. J. Böhm, S. Nogales, J.H. You:
    "Continuum Modeling of the Thermophysical and Thermomechanical Behavior of Metal Matrix Composites";
    Talk: 1st International Conference on New Materials for Extreme Environments, San Sebastian; 2008-06-02 - 2008-06-04.

  37. P.H. Mayrhofer, D. Music, J.M. Schneider, F.D. Fischer, H. J. Böhm:
    "Structure, Elastic Properties, and Phase Stability of Cr_(1-x)Al_xN";
    Talk: The International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2008, San Diego, CA; 2008-04-28 - 2008-05-02.

  38. M. Schöbel, H. J. Böhm, H.P. Degischer, S. Nogales:
    "Particle reinforced materials for heat sink applications interface bonding and conductivity modeling";
    Poster: Hannover Messe, Hannover; 2008-04-21 - 2008-04-23.

  39. F.G. Barth, H. J. Böhm, B. Hößl, F. G. Rammerstorfer:
    "Computational Treatment of Slit Sensilla of Spiders - Biomechanics in Neurobiology";
    Talk: ECCOMAS Multidisciplinary Jubilee Symposium, Wien (invited); 2008-02-18 - 2008-02-20.

  40. S. Nogales, H. J. Böhm:
    "Modelling of Particle Reinforced Heat Sinks";
    Talk: Sitzung des DGM-Fachausschusses "Metallische Verbundwerkstoffe und zellulare Materialien", Garching; 2007-11-06.

  41. C. Eisenmenger-Sittner, H. J. Böhm:
    "Contributions to Process Development, Modelling and Testing of ExtreMaterials";
    Talk: 2nd KMM-NoE Integration Conference, Wien; 2007-10-24 - 2007-10-25.

  42. S. Nogales, H. J. Böhm, J.H. You:
    "Modeling the Thermomechanical Behavior of Ductile Matrix Composites";
    Talk: ExtreMat SP2 Meeting, Warschau; 2007-10-15 - 2007-10-18.

  43. S. Nogales, H. J. Böhm:
    "Thermal and Thermomechanical Modeling of Particle Reinforced Composites";
    Poster: 2nd IDEA League Summer School "Multiscale Modelling in Materials Science and Engineering", Simonskall; 2007-07-23 - 2007-07-28.

  44. C. Grohs, M. Seitzberger, S. Kaltmann, H. J. Böhm:
    "FEM-Aided Evaluation of Parameters for Ductile Damage Modeling";
    Talk: 6th International Conference on Fracture and Damage Mechanics, Funchal, Madeira; 2007-07-17 - 2007-07-19.

  45. H. J. Böhm, S. Nogales:
    "Mori-Tanaka and Unit Cell Predictions for the Thermoelastic and Thermal Conduction Behavior of Discontinuously Reinforced Composites";
    Talk: McMAT 2007 - ASME Applied Mechanics and Materials Conference, Austin, TX; 2007-06-03 - 2007-06-07.

  46. H. J. Böhm, S. Nogales, J.H. You:
    "Modeling the Thermophysical and Thermomechanical Behavior of Diamond Particle Reinfoced MMCs";
    Talk: ExtreMat SP2 Meeting, Thun; 2007-05-07 - 2007-05-10.

  47. P.H. Mayrhofer, F.D. Fischer, H. J. Böhm, C. Mitterer, J.M. Schneider:
    "Energetic Balance and Kinetics for the Decompositon of Supersaturated Ti1-xAlxN";
    Poster: The International Conference on Metallurgical Coatings and Thin Films, ICMTF 2007, San Diego, CA; 2007-04-23 - 2007-04-27.

  48. F.G. Barth, B. Hößl, C.F. Schaber, S. Gorb, H. J. Böhm, F. G. Rammerstorfer:
    "Arthropod Mechanoreceptors: From Biology to Engineering";
    Talk: Annual Main Meeting of the Society for Experimental Biology, Glasgow; 2007-03-31 - 2007-04-04.

  49. H. J. Böhm, B. Hößl, F. G. Rammerstorfer, F.G. Barth:
    "Finite Element Modelling of Slit Sensilla of Arachnids";
    Talk: NCBES Seminar, Galway, Irland; 2006-12-11.

  50. H. J. Böhm, S. Nogales, H. E. Pettermann:
    "Comparisons of Mori-Tanaka and Unit Cell Predictions for the Thermoelastic and Thermal Conduction Behavior of Discontinuously Reinforced Composites";
    Talk: 19th International Workshop "Research in Mechanics of Composites", Bad Herrenalb; 2006-11-26 - 2006-11-29.

  51. S. Nogales, H. J. Böhm, J.H. You:
    "Modeling of Discontinuously Reinforced and Skeleton Heat Sinks";
    Talk: 5th ExtreMat Progress Meeting, Jülich; 2006-10-23 - 2006-10-26.

  52. H. E. Pettermann, C.O. Huber, M.H. Luxner, S. Nogales, H. J. Böhm:
    "Finite Elastic-Plastic Deformations of MMC Components - Multiscale Mean Field and Unit Cell Simulations";
    Talk: 35th Solid Mechanics Conference, Krakau; 2006-09-04 - 2006-09-08.

  53. J. Segurado, S. Nogales, J. LLorca, H. J. Böhm:
    "The Coupling of Interface Decohesion and Ductile Matrix Fracture in Composites";
    Talk: 43rd Annual Technical Meeting of the Society of Engineering Science, University Park, PA; 2006-08-13 - 2006-08-16.

  54. H. J. Böhm, S. Nogales, D. Duschlbauer, H. E. Pettermann:
    "Numerically Based Modeling of Thermal Conduction in Discontinuosly Reinforced Composites";
    Talk: 7th World Congress on Computational Mechanics (WCCM-7), Los Angeles, CA; 2006-07-16 - 2006-07-22.

  55. B. Hößl, H. J. Böhm, F. G. Rammerstorfer, F.G. Barth:
    "Arthropod Strain Detectors: I. Modeling the Mechanics of Arachnid Lyriform Organs by Finite Element Models";
    Poster: Fifth Forum of European Neuroscience, Wien; 2006-07-08 - 2006-07-12.

  56. T. Daxner, R.D. Bitsche, H. J. Böhm:
    "Micromechanical Models of Metallic Sponges with Hollow Struts";
    Talk: THERMEC 2006 - International Conference on Processing and Manufacturing of Advanced Materials, Vancouver, BC; 2006-07-04 - 2006-07-08.

  57. H. J. Böhm, S. Nogales, J.H. You:
    "Modeling the Thermal Conductivity of Diamond Particle Reinforced MMCs";
    Talk: ExtreMat SP2 Meeting, Athen; 2006-05-15 - 2006-05-18.

  58. H. J. Böhm, F.D. Fischer:
    "Analysis of Thin Coatings Containing Two Types of Transforming Inhomogeneities";
    Talk: MFO Workshop "Mechanics of Materials" 2006, Oberwolfach (invited); 2006-01-22 - 2006-01-27.

  59. T. Daxner, R.D. Bitsche, H. J. Böhm:
    "Space Filling Polyhedra as Mechanical Models for Solidified Dry Foams";
    Talk: 4th International Conference on Porous Metals and Metal Foaming Technology, Kyoto; 2005-09-21 - 2005-09-23.

  60. P. Casagrande, A. Starlinger, H. J. Böhm:
    "Zur Ermüdungsauswertung von Schienenfahrzeugkomponenten basierend auf Python-Routinen";
    Talk: Deutschsprachige ABAQUS Benutzerkonferenz 2005, Nürnberg; 2005-09-19 - 2005-09-20.

  61. T. Daxner, R.D. Bitsche, H. J. Böhm:
    "Raumfüllende Polyeder als mechanische Modelle für erstarrte trockene Schäume";
    Talk: Workshop Simulation von Schaumstoffen mit stark nichtlinearem Verhalten, Hohenwart, Deutschland; 2005-09-15 - 2005-09-16.

  62. H. J. Böhm, T. Drabek, D. Duschlbauer, A. Eckschlager, W. Han, C.O. Huber, H. E. Pettermann:
    "Unit Cell and Mean Field Models of Continuously Reinforced Composites";
    Keynote Lecture: Micromechanics and Microstructure Evolution: Modeling Simulation and Experiments, Madrid (invited); 2005-09-12 - 2005-09-16.

  63. S. Nogales, H. J. Böhm, J.H. You:
    "Modelling of Discontinuously Reinforced and Skeleton Heat Sinks";
    Talk: ExtreMat SP2 Meeting, Bratislava; 2005-08-31.

  64. H. J. Böhm, F.D. Fischer:
    "On the Mechanical Driving Force on a Spheroidal Inclusion";
    Talk: Euromech Colloquium 466 "Computational and Experimental Mechanics of Advanced Materials", Loughborough (invited); 2005-07-20 - 2005-07-22.

  65. H. J. Böhm:
    "Continuum Modeling of the Thermomechanical and Thermophysical Behavior of Discontinuously Reinforced Composites";
    Talk: Kolloquium über Werkstoffmodellierung, Stuttgart (invited); 2005-07-01.

  66. H. J. Böhm:
    "Modellierung inhomogener Werkstoffe";
    Talk: Informationsveranstaltung "Neue Werkstoffe: Entwicklung - Charakterisierung - Anwendung", Wien (invited); 2005-06-22.

  67. B. Hößl, H. J. Böhm, F. G. Rammerstorfer, R. Müllan, F.G. Barth:
    "Engineering Meets Biology: Computer Based Modeling of Spider Strain Detectors";
    Talk: 9th Meeting of the Austrian Neuroscience Association, Obergurgl; 2005-06-21 - 2005-06-26.

  68. H. J. Böhm, S. Nogales:
    "Modelling of Discontinuously Reinforced and Skeleton Heat Sinks";
    Talk: ExtreMat SP2 Meeting, San Sebastián; 2005-05-03.

  69. H. J. Böhm:
    "Aspects of the Micromechanical Modeling of Discontinuously Reinforced Ductile Matrix Composites";
    Talk: GEPPM Seminar, Lyon (invited); 2005-04-26.

  70. T. Drabek, H. J. Böhm:
    "Finite Element Analysis Considering Ductile Failure in Metal Matrix Composites";
    Talk: IWCMM 14, Goa; 2004-09-23 - 2004-09-25.

  71. F.G. Barth, B. Hößl, H. J. Böhm, F. G. Rammerstorfer:
    "From technical biology to natural technology? The remarkable refinement of spider mechano-sensors";
    Talk: Insect Sensors and Robotics, Brisbane (invited); 2004-08-23 - 2004-08-26.

  72. T. Drabek, H. J. Böhm:
    "Unit Cell Studies of Ductile Damage in Fiber Reinforced Metal Matrix Composites";
    Talk: ECCOMAS 2004 (4th European Congress on Computational Methods in Applied Sciences and Engineering), Jyväskylä (invited); 2004-07-24 - 2004-07-28.

  73. D. H. Pahr, C. Marte, F. G. Rammerstorfer, H. J. Böhm:
    "Hierarchical Modelling of Perforated Woven Fabric Laminates";
    Talk: ECCOMAS 2004 (4th European Congress on Computational Methods in Applied Sciences and Engineering), Jyväskylä (invited); 2004-07-24 - 2004-07-28.

  74. T. Drabek, H. J. Böhm:
    "Simulation of Ductile Damage in Metal Matrix Composites";
    Talk: Materials Processing and Design: Modeling, Simulation and Applications NUMIFORM 2004, Columbus, OH (invited); 2004-06-13 - 2004-06-17.

  75. T. Drabek, H. J. Böhm:
    "In search of damage models for crack propagation in a ductile matrix of metal matrix composites";
    Poster: IWCMM 13, Magdeburg; 2003-09-22 - 2003-09-23.

  76. A. Ableidinger, T. Daxner, H. J. Böhm, F. G. Rammerstorfer:
    "Micro/Macro Simulations of Fracture in Open Cell Metallic Foams";
    Talk: 5th Euromech Solid Mechanics Conference ESMC-5, Thessaloniki; 2003-08-17 - 2003-08-22.

  77. H. J. Böhm, J. Segurado, D. Duschlbauer, H. E. Pettermann, A. F. Plankensteiner:
    "Modeling of the Densification of Porous Molybdenum by a Unit Cell Approach";
    Talk: 5th Euromech Solid Mechanics Conference ESMC-5, Thessaloniki; 2003-08-17 - 2003-08-22.

  78. H. J. Böhm:
    "A Short Introduction to Continuum Micromechanics";
    Talk: CISM Course and 12th IUTAM Summer School "Mechanics of Microstructured Materials", Udine (invited); 2003-07-07 - 2003-07-11.

  79. H. J. Böhm:
    "Modeling the Mechanical Behavior of Short Fiber Reinforced Composites";
    Talk: CISM Course and 12th IUTAM Summer School "Mechanics of Microstructured Materials", Udine (invited); 2003-07-07 - 2003-07-11.

  80. H. J. Böhm:
    "Kontinuumsmodelle zur Beschreibung des thermomechanischen Verhaltens diskontinuierlich verstärkter Materialien";
    Talk: 14. DGM Symposium Verbundwerkstoffe und Werkstoffverbunde, Wien (invited); 2003-07-02 - 2003-07-04.

  81. D. Duschlbauer, H. E. Pettermann, H. J. Böhm:
    "Rechnerische Simulation der Wärmeleitungseigenschaften von MMCs mit spezieller Berücksichtigung eines thermischen Widerstandes am Interface";
    Talk: 14. DGM Symposium Verbundwerkstoffe und Werkstoffverbunde, Wien; 2003-07-02 - 2003-07-04.

  82. D. Duschlbauer, H. E. Pettermann, H. J. Böhm:
    "Heat Conduction of Spheroidal Inhomogeneities with Imperfect Interfaces";
    Talk: 2003 ASME Mechanics and Materials Conference, Scottsdale, AZ; 2003-06-17 - 2003-06-20.

  83. H. J. Böhm:
    "Multipartikel-Einheitszellenmodelle für diskontinuierlich verstärkte Materialien und Modellierung des Partikelbruchs in Duktilmatrix-Composites";
    Talk: CDL-FMD Evaluierungsseminar, Wien; 2003-03-26.

  84. D. Duschlbauer, H. J. Böhm, H. E. Pettermann:
    "Die Berechnung von Faserspannungen in Composites mit nicht ausgerichteten Fasern basierend auf der Mori-Tanaka Methode";
    Talk: Workshop AG Composite 2002, Berlin; 2002-11-18 - 2002-11-20.

  85. H. J. Böhm:
    "Introduction to Micromechanics of Composite Materials";
    Talk: COMMAS Summer School "Computational Mechanics of Materials and Structures", Stuttgart (invited); 2002-09-30 - 2002-10-11.

  86. H. J. Böhm:
    "Micromechanical Studies of Discontinuously Reinforced Composites";
    Talk: 12th International Workshop on Computational Mechanics of Materials, Darmstadt (invited); 2002-09-16 - 2002-09-17.

  87. H. J. Böhm, T. Drabek, A. Eckschlager:
    "Continuum Mechanical Unit Cell Models for Studying the Thermomechanical Behavior of High Speed Tool Steels";
    Talk: 6th International Tooling Conference, Karlstad; 2002-09-10 - 2002-09-13.

  88. H. J. Böhm:
    "Unit Cell Studies on the Thermomechanical Behavior of Discontinuously Reinforced Metal Matrix Composites";
    Talk: IUTAM Symposium on Micromechanics of Fluid Suspensions and Solid Composites, Austin, TX (invited); 2002-04-03 - 2002-04-05.

  89. H. J. Böhm, M. Kozek:
    "Überblick über Simulationsmethoden";
    Talk: Österr. Ingenieur- und Architektenverein (ÖIAV), Vienna; 2000-04-10.


Patents


  1. M. Haider, F. G. Rammerstorfer, H. J. Böhm, C. Diendorfer, F. Toth:
    "Anordnung von Schwimmplattformen";
    Patent: Österreich, No. A 1027/2011; submitted: 2011-07-13.

  2. M. Haider, F. G. Rammerstorfer, H. J. Böhm, C. Diendorfer, F. Toth:
    "Schwimmplattform";
    Patent: Östereich, No. A 1028/2011; submitted: 2011-07-13.

  3. A. Kuhn, G. Schlager, H. J. Böhm:
    "Verfahren zur Erstellung einer Beschreibung von komplexen Materialien mittles neuronaler Netze oder verwandter Techniken";
    Patent: Österreich, No. PCT/AT/2008000375; submitted: 2008-10-08, granted: 2010-06-01.


Habilitation Theses


  1. H. J. Böhm:
    "Einheitszellenanalysen für unidirektional langfaserverstärkte Metallmatrix-Verbundwerkstoffe";
    TU Wien, Fakultät für Maschinenbau, 1994.


Doctor's Theses (authored and supervised)


  1. J. Kronsteiner:
    "Advanced Numerical Methods and Mesh Manipulation Strategies for Large Deformation Processes";
    Supervisor, Reviewer: K. Zeman, H. J. Böhm, H Irschik; JKU Linz, 2020; oral examination: 2020-01-29.

  2. M.I. El Ghezal:
    "Contribution to the Nonlinear Micromechanical Modeling of Composite and Porous Materials under Small and Large Deformations";
    Supervisor, Reviewer: I. Doghri, L. Delannay, T. Pardoen, D. Kondo, H. J. Böhm, K. Danas; Institute of Mechanics, Materials and Civil Engineering, UC Louvain, 2017; oral examination: 2017-12-18.

  3. R. Traxl:
    "Continuum Micromechanics-Based Determination of Effective Properties of Elastoplastic Matrix-Inclusion Materials: Application within the Finite Element Analysis of Indentation and Impact Problems";
    Supervisor, Reviewer: R. Lackner, H. J. Böhm; Institut für Konstruktion und Materialwissenschaften, Universität Innsbruck, 2016; oral examination: 2016-09-15.

  4. A.Y. Matveeva:
    "Structure-Property Relationships in Polymer Nanocomposites";
    Supervisor, Reviewer: F.W.J. van Hattum, L. Gorbatikh, H. J. Böhm; Universidade do Minho, 2015; oral examination: 2015-05-08.

  5. S. Bauer:
    "Two-Step Determination of Strength Evolution of Heterogeneous Materials Controlled by Endo- or Exothermal Chemical Reactions";
    Supervisor, Reviewer: R. Lackner, H. J. Böhm; Institut für Konstruktion und Materialwissenschaften, Universität Innsbruck, 2014; oral examination: 2014-07-01.

  6. H. Moussaddy:
    "A New Definition of the Representative Volume Element in Numerical Homogenization Problems and its Application to the Performance Evaluation of Analytical Homogenization Models";
    Supervisor, Reviewer: M. Lèvesque, D. Therriault, H. J. Böhm; École Polytechnique de Montréal, 2013.

  7. A. Rasool:
    "Improved Multi-Particle Unit Cell Models for Studying Particle Reinforced Composites";
    Supervisor, Reviewer: H. J. Böhm, T. Antretter; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2011; oral examination: 2011-05-26.

  8. Q.T. Bui:
    "Studies on Modeling the Failure Behavior of Spot Welds";
    Supervisor, Reviewer: H. J. Böhm, B. Pichler; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2009; oral examination: 2009-08-12.

  9. C. Grohs:
    "Study of Effects of Weld Seams in Finite Element Crash Simulations";
    Supervisor, Reviewer: H. J. Böhm, J. Eberhardsteiner; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2008; oral examination: 2008-09-17.

  10. S. Nogales:
    "Numerical Simulation of the Thermal and Thermomechanical Behavior of Metal Matrix Composites";
    Supervisor, Reviewer: H. J. Böhm, H. Bolt; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2008; oral examination: 2008-07-24.

  11. B. Hößl:
    "Mechanical Simulation of Slit Sensors of Arachnids";
    Supervisor, Reviewer: H. J. Böhm, F.G. Barth; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2007; oral examination: 2007-04-20.

  12. F. Harewood:
    "Micro and Macromechanical Modelling of Cardiovascular Stents in Realistic Arterial Geometries";
    Supervisor, Reviewer: P.E.M. McHugh, H. J. Böhm; National University of Ireland, Galway, 2006; oral examination: 2006-12-11.

  13. T. Drabek:
    "Modeling of Matrix Damage in Particle Reinforced Ductile Matrix Composites";
    Supervisor, Reviewer: H. J. Böhm, H.P. Degischer; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2005.

  14. D. Duschlbauer:
    "Computational Simulation of the Thermal Conductivity of MMCs under Consideration of the Inclusion-Matrix Interface";
    Supervisor, Reviewer: H. J. Böhm, H.P. Degischer; Institut für Leichtbau und Flugzeugbau, TU Wien, 2003.

  15. A. Eckschlager:
    "Simulation of Particle Failure in Particle Reinforced Ductile Matrix Composites";
    Supervisor, Reviewer: H. J. Böhm, H.P. Degischer; Institut für Leichtbau und Flugzeugbau, TU Wien, 2002.

  16. A.F. Plankensteiner:
    "Multiscale Treatment of Heterogeneous Nonlinear Solids and Structures";
    Supervisor, Reviewer: H. J. Böhm, H.P. Degischer; Institut für Leichtbau und Flugzeugbau, TU Wien, 1997.

  17. H. J. Böhm:
    "Computer Based Micromechanical Investigations of the Thermomechanical Behavior of Metal Matrix Composites";
    Supervisor, Reviewer: F. G. Rammerstorfer, P. Ettmayer; Institut für Leichtbau und Flugzeugbau, TU Wien, 1991.


Diploma and Master Theses (authored and supervised)


  1. M. Mechtler:
    "Structural Optimization of a Tram Car Body in Differential Design";
    Supervisor: H. J. Böhm; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2019; final examination: 2019-04-30.

  2. C Klancnik:
    "Comparison of Analytical and Numerical Models for Composites with Sphere-Shaped Reinforcements";
    Supervisor: H. J. Böhm; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2017; final examination: 2017-09-04.

  3. A. Wagner:
    "Efficient Finite Element Modelling of Residual Stresses in Multilayer Coatings";
    Supervisor: H. J. Böhm, M. Todt; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2017; final examination: 2017-06-22.

  4. M. Nagler:
    "Analytical Treatment of Residual Stresses in Multilayer Coatings";
    Supervisor: H. J. Böhm, M. Todt; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2017; final examination: 2017-06-21.

  5. D. Roither:
    "Entwicklung eines Programms zur Erzeugung von Volumselementen auf Basis tetrakaidekaderförmiger Bereiche";
    Supervisor: H. J. Böhm; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2017; final examination: 2017-06-21.

  6. M. Stufferin:
    "Elasto-Plastische Materialmodellierung eines stark anisotropen und asymmetrischen Polystyrolschaums";
    Supervisor: H. J. Böhm; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2017.

  7. L.F. Leidinger:
    "An Early Phase Crashworthiness Assessment and Design Methodology for CFRP Vehicle Structures";
    Supervisor: F. Duddeck, H. J. Böhm; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2016; final examination: 2016-12-14.

  8. A. Ruthmeier:
    "Structural Opimization of Reinforced Shell Structures";
    Supervisor: H. J. Böhm; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2015; final examination: 2015-10-30.

  9. B. Boyano Largo:
    "Parameter Effects in Linear Embedding Analysis";
    Supervisor: H. J. Böhm; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2015.

  10. S. Zulaika Arkauz:
    "Effects of the Relative Sizes of Inhomogeneities on the Mechanical Behavior of Composite Materials";
    Supervisor: H. J. Böhm; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2015.

  11. C. Gaßner:
    "Development and Validation of a Material Model with Artificial Neural Networks";
    Supervisor: H. J. Böhm; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2014; final examination: 2014-03-06.

  12. H. Benito Campos:
    "Inhomogeneities in Matrices with Grain Structure";
    Supervisor: H. J. Böhm; Institut für Leichtbau und Struktur-Biomechanik, TU Wien; Universidade de Vigo, 2014.

  13. V. Migkos:
    "Volumselemente für diamantpartikelverstärkte Metallmatrix-Composites";
    Supervisor: H. J. Böhm; Institut für Leichtbau und Struktur-Biomechanik, TU Wien: Aristotle University of Thessaloniki, 2013.

  14. J.L. Vázquez Lopez:
    "Study of Microfields in the Reinforcement Phase of Two-Phase Composites";
    Supervisor: H. J. Böhm; Institut für Leichtbau und Struktur-Biomechanik, TU Wien; Universidade de Vigo, 2012.

  15. A. Bartolomé Chavert:
    "Unit Cell Based Evaluation of Strain Energy Densities Caused by the Transformation of a Matrix into Two Families of Inhomogeneous Inclusions";
    Supervisor: H. J. Böhm; Institut für Leichtbau und Struktur-Biomechanik, TU Wien; Universidade de Vigo, 2011.

  16. M. B. Gándara:
    "Assessment of Mixed Uniform Boundary Conditions for Predicting the Macroscopic Mechanical Behavior of Particle Reinforcement Composite Materials";
    Supervisor: H. J. Böhm, D. H. Pahr; Institut für Leichtbau und Struktur-Biomechanik, TU Wien; Universidade de Vigo, 2008.

  17. R. Hauleitner:
    "Investigation of Cage Versions of Fast Rotating Ball Bearings";
    Supervisor: H. J. Böhm, T. Daxner; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2007; final examination: 2007-06-20.

  18. A. Chamadoira:
    "Unit Cell Studies of Unidirectional and Cross-Ply Long Fiber Reinforced MMC";
    Supervisor: H. J. Böhm; Institut für Leichtbau und Struktur-Biomechanik, TU Wien; Universidade de Vigo, 2007.

  19. F. Barborik:
    "Dynamische FE-Analyse von gelenkig verbundenen Bauteilgruppen";
    Supervisor: H. J. Böhm, T. Daxner; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2005.

  20. R.D. Bitsche:
    "Space Filling Polyhedra as Mechanical Models for Solidified Dry Foams";
    Supervisor: T. Daxner, H. J. Böhm; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2005.

  21. P. Casagrande:
    "Entwicklung einer Auswerteroutine zur Evaluation der Ermüdungsbeanspruchung von Komponenten auf Basis von Hauptnormalspannungen";
    Supervisor: H. J. Böhm, A. Starlinger; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2005.

  22. C. Marte:
    "Untersuchung von 2/2 Twill-Gewebe Laminaten mit Hilfe von 3D-Finite Elemente Einheitszellen";
    Supervisor: H. J. Böhm, D. H. Pahr; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2004.

  23. S. Nogales:
    "Study of Response of Particle Reinforced Ductile Matrix Composites under Selected Load Cases";
    Supervisor: H. J. Böhm; Institut für Leichtbau und Struktur-Biomechanik, TU Wien; UP Madrid, 2004.

  24. C.O. Huber:
    "Analytical and Finite Element Analyses of Carbon Fiber Reinforced Rollers with Classical and Nonclassical Boundary Conditions";
    Supervisor: H. J. Böhm; Institut für Leichtbau und Flugzeugbau, TU Wien, 2003.

  25. M. Seyr:
    "Numerische Simulation von regelmäßigen zellulären Strukturen";
    Supervisor: H. J. Böhm, H. E. Pettermann; Institut für Leichtbau und Flugzeugbau, TU Wien, 2003.

  26. M. Waldboth:
    "Implementierung eines singulären 2/D Elementes mit variabler Ordnung der Singularität";
    Supervisor: H. J. Böhm; Institut für Leichtbau und Flugzeugbau, TU Wien, 2002.

  27. J. Segurado:
    "Micromechanical Analysis of the Mechanical Behavior of Sintered Refractory Metals";
    Supervisor: H. J. Böhm; Institut für Leichtbau und Struktur-Biomechanik, TU Wien; UP Madrid, 2000.

  28. G. Tisch:
    "Parameterstudie über das Steifigkeitsverhalten geschraubter Flanschverbindungen in Stuhlungen von Papiermaschinen auf Basis der Methode der Finiten Elemente";
    Supervisor: H. J. Böhm; Institut für Leichtbau und Flugzeugbau, TU Wien, 2000.

  29. A. F. Plankensteiner:
    "Mean Field Algorithmen zur thermo-elasto-plastischen Materialcharakterisierung von MMCs";
    Supervisor: H. J. Böhm; Institut für Leichtbau und Flugzeugbau, TU Wien, 1994.


Scientific Reports


  1. H. J. Böhm:
    "Notes on Some Mean Field Approaches for Thermoelastic Two-Phase Composites";
    Report for Institut für Leichtbau und Struktur-Biomechanik, TU Wien; Report No. ILSB-Report 259, 2011; 188 pages.

  2. H. J. Böhm, A. Kuhn, G. Schlager:
    "KoMMoDO (Komplexe MaterialModellierungs-Offensive)";
    Report for FFG (BRIDGE-Endbericht); 2008; 11 pages.

  3. H. J. Böhm:
    "A Short Introduction to Basic Aspects of Continuum Micromechanics";
    Report for Institut für Leichtbau und Struktur-Biomechanik, TU Wien; Report No. ILSB Report 206, 2007; 161 pages.

  4. H. J. Böhm:
    "Endbericht zum Christian Doppler Laboratorium Funktionsorientiertes Werkstoff-Design";
    Report for Christian Doppler Forschungsgesellschaft; 2005.

  5. H. J. Böhm:
    "Jahresbericht 2004 zum Christian Doppler Laboratorium Funktionsorientiertes Werkstoff-Design";
    Report for Christian Doppler Forschungsgesellschaft; 2005.

  6. H. J. Böhm, S. Nogales:
    "Phase 2 AC Report: Modelling of Discontinuously Reinforced and Skeleton Composites";
    Report for ExtreMat Integrated Project; 2005.

  7. H. J. Böhm, S. Nogales:
    "State of the Art Review: Modelling of Discontinuously Reinforced and Skeleton Composites";
    Report for ExtreMat Integrated Project; 2005.

  8. H. J. Böhm:
    "Jahresbericht 2003 zum Christian Doppler Laboratorium Funktionsorientiertes Werkstoff-Design";
    Report for Christian Doppler Forschungsgesellschaft; 2004.

  9. T. Drabek, H. J. Böhm:
    "Nichtlokale Modellierung duktiler Schädigung in Metallmatrix-Verbundwerkstoffen";
    Report for Zentraler Informatikdienst der TU Wien; 2004.

  10. M. Luxner, H. J. Böhm:
    "Rechnerische Untersuchung der Beanspruchung im Fußbereich der Bronzeplastiken am Dach der Wiener Oper";
    Report for Bundestheater Holding, Wien; 2004.

  11. H. J. Böhm:
    "Jahresbericht 2002 zum Christian Doppler Laboratorium Funktionsorientiertes Werkstoff-Design";
    Report for Christian Doppler Forschungsgesellschaft; 2003.

  12. H. J. Böhm:
    "Jahresbericht 2001 zum Christian Doppler Laboratorium Funktionsorientiertes Werkstoff-Design";
    Report for Christian Doppler Forschungsgesellschaft, Wien; 2002.

  13. H. J. Böhm, T. Drabek, A. Eckschlager:
    "Mikromechanik inhomogener Werkstoffe - Dreidimensionale Einheitszellenmodelle. Jahresbericht 2002";
    Report for Zentraler Informatikdienst der TU Wien; 2002.

  14. R.B. Stewart, F. Marketz, W.C.M. Lohbeck, F.D. Fischer, W. Daves, F. G. Rammerstorfer, H. J. Böhm:
    "Expandable Wellbore Tubulars";
    Report for Shell International Exploration and Production B.V.; Report No. SIEP 99-5628, 1999.