TU Home
Diese Publikationsliste wurde automatisch aus den Publikationsdaten der Fakultät für Maschinenwesen und Betriebswissenschaften erstellt. Wenn Sie komplexere Suchabfragen vornehmen wollen, rufen Sie bitte die Seite "Publikationen der Fakultät" direkt auf, oder verwenden Sie die globale Suchfunktion der Publikationsdatenbank der Technischen Universität Wien!


Publikationsdatenbank Home  

Publikationsliste für
Werner Mack
E325 - Institut für Mechanik und Mechatronik
als Autorin / Autor bzw. wesentlich beteiligte Person

76 Datensätze (1999 - 2022)

Die Publikationen der Fakultät für Maschinenwesen und Betriebswissenschaften sind erst ab dem Jahr 2002 vollzählig in der Publikationsdatenbank enthalten. Publikationen aus den Jahren vor 2002 können, müssen aber nicht in der Datenbank vorhanden sein.


Bücher und Buch-Herausgaben


U. Gamer, W. Mack:
"Mechanik: ein einführendes Lehrbuch für Studierende der technischen Wissenschaften";
Springer, SpringerWienNewYork, 1999, ISBN: 3-211-82854-0.

W. Mack, P. Lugner, M. Plöchl:
"Angewandte Mechanik: Aufgaben und Lösungen aus Statik und Festigkeitslehre";
Springer-Verlag, Wien, 2006, ISBN: 3-211-25672-5; 140 S.


Zeitschriftenartikel


T. Apatay, E. Arslan, W. Mack:
"Effects of homogeneous and inhomogeneous heating on otating shrink fits with annular inclusion and funtionally graded hub";
Journal of Thermal Stresses, 42 (2019), 11; S. 1458 - 1479.

T. Apatay, E. Arslan, W. Mack:
"Elastic-plastic design of a rotating shrink fit with functionally graded hub";
Archive of Applied Mechanics, 87 (2017), 11; S. 1829 - 1843.

T. Apatay, E. Arslan, W. Mack:
"On the design of rotating elastic shrink fits with annular inclusion and functionaqlly graded hub";
Mechanics based design of structures and machines, 47 (2019), 3; S. 339 - 355.

T. Apatay, W. Mack:
"On the optimum design of rotating two-layered composite tubes subject to internal heating or pressure";
Forschung im Ingenieurwesen, 79 (2015), S. 109 - 122.

T. Apatay, W. Mack:
"Optimization of two-layered steel/aluminium hollow cylinders under combined load";
PAMM, 15 (2015), S. 167 - 168.

E. Arslan, A.N. Eraslan, W. Mack:
"Elastic-plastic states of a rotating inhomogeneously heated strain hardening hollow shaft";
PAMM, 7 (2007), S. 4040051 - 4040052.

E. Arslan, W. Mack:
"Effects of parameter uncertainties on the forecasted behavior of thermomechanically loaded thick-walled functionally graded spherical structures";
Acta Mechanica, 233 (2022), S. 1865 - 1880.

E. Arslan, W. Mack:
"Elastic limit analysis of a thick-walled cylindrical panel subject to radial heating";
PAMM, 12 (2012), S. 219 - 220.

E. Arslan, W. Mack:
"Elastic-plastic states of a radially heated thick-walled cylindrically curved panel";
Forschung im Ingenieurwesen, 78 (2014), S. 1 - 11.

E. Arslan, W. Mack:
"Shrink fit with FGM-hub subject to heating and rotation";
PAMM, 15 (2015), S. 169 - 170.

E. Arslan, W. Mack:
"Shrink fit with solid inclusion and functionally graded hub";
Composite Structures, 121 (2015), S. 217 - 224.

E. Arslan, W. Mack, T. Apatay:
"Thermo-mechanically loaded steel/aluminum functionally graded spherical containers and pressure vessels";
International Journal of Pressure Vessels and Piping, 191 (2021).

E. Arslan, W. Mack, A.N. Eraslan:
"Effect of a temperature cycle on a rotating elastic-plastic shaft";
Acta Mechanica (eingeladen), 195 (2008), S. 129 - 140.

E. Arslan, W. Mack, A.N. Eraslan:
"The rotating elastic-plastic hollow shaft conveying a hot medium";
Forschung im Ingenieurwesen, 74 (2010), S. 27 - 39.

E. Arslan, W. Mack, A.N. Eraslan:
"Transient heating of a rotating elastic-plastic solid shaft";
PAMM, 8 (2008), S. 10257 - 10258.

E. Arslan, W. Mack, U. Gamer:
"Elastic limits of a radially heated thick-walled cylindrically curved panel";
Forschung im Ingenieurwesen, 77 (2013), S. 13 - 23.

A.N. Eraslan, E. Arslan, W. Mack:
"The strain hardening rotating hallow shaft subject to a positive temperature gradient";
Acta Mechanica, 194 (2007), S. 191 - 211.

A.N. Eraslan, W. Mack:
"A computational procedure for estimating residual stresses and secondary plastic flow limits in nonlinearly strain hardening rotating shafts";
Forschung im Ingenieurwesen, 69 (2005), S. 65 - 75.

C. Hametner, J. Edelmann, S. Jakubek, W. Mack:
"An advanced algorithm for partitioning and parameter estimation in local model networks and its application to vehicle vertical dynamics";
Acta Mechanica (eingeladen), 223 (2012), 8; S. 1693 - 1706.

M. Haskul, E. Arslan, W. Mack:
"Radial heating of a thick-walled cylindrically curved FGM-panel";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, 97 (2017), 3; S. 309 - 321.

M. Haskul, E. Arslan, W. Mack:
"Thermally loaded thick-walled cylindrically curved aluminum/steel-FGM-panel";
PAMM, 16 (2016), S. 185 - 186.

Ph. Heinzl, M. Plöchl, W. Mack, P. Lugner:
"Closed-loop analysis of an articulated railcar train";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, 80 (2000), 2; S. 349 - 350.

M. Jirout, W. Mack, P. Lugner:
"Non-smooth dynamics of a magnetic track brake";
Regular and Chaotic Dynamics (eingeladen), 14 (2009), 6; S. 673 - 681.

R. Kollau, W. Mack, A. Falkner, Yenilmez:
"Effiziente Fahrzeugsimulation durch konsistente Komponentenmodellierung und -parametrierung";
Automobiltechnische Zeitschrift (ATZ), 114 (2012), 05; S. 442 - 447.

W. Mack, J. Edelmann, A. Falkner:
"Drift-Effekte in der nabenkrafterregten Kraftfahrzeugsimulation";
Elektrotechnik & Informationstechnik, 132 (2015), 8; S. 462 - 468.

W. Mack, M. Plöchl:
"Instationäre Waermebelastung eines rotierenden elastisch-plastischen Querpressverbandes";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, 79 (1999), S. 465 - 466.

W. Mack, M. Plöchl:
"Transient heating of a rotating elastic-plastic shrink fit";
International Journal of Engineering Science, 38 (2000), 8; S. 921 - 938.

W. Mack, M. Plöchl, U. Gamer:
"Auswirkungen eines Temperaturzyklus auf einen rotierenden elastisch-plastischen Querpressverband mit vollem Einschluß";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, 81 (2001), S. 351 - 352.

W. Mack, M. Plöchl, U. Gamer:
"Effects of a Temperature Cycle on an Elastic-Plastic Shrink Fit with Solid Inclusion";
Journal of Mechanics (eingeladen), 16 (2000), 1; S. 23 - 30.

M. Mitsch, W. Mack, A. Falkner:
"On the scattering of test data and the significance of the standard coefficients "dynamic stiffness" and "loss angle" for hydraulic engine mounts";
Vehicle System Dynamics, 48 (2010), 3; S. 387 - 403.

M. Plöchl, Ph. Heinzl, W. Mack, P. Lugner:
"Dynamic analysis of an articulated interurban train by means of a symbolic-numerical method for closed-loop mechanisms";
Proceedings of the Institution of Mechanical Engineers Part K - Journal of Multi-Body Dynamics, 214 (2000), 243; S. 243 - 252.

J. Vilsecker, W. Mack, A. Falkner, R. Hanfstingl:
"Effects of non-linear modelling of a hydromount in full vehicle simulation";
Int. J. Vehicle Noise and Vibration, 7 (2011), 2; S. 109 - 128.

J. Vilsecker, W. Mack, A. Falkner, R. Hanfstingl:
"On the complexity of hydromount-models in full vehicle simulation";
PAMM, 11 (2011), S. 341 - 342.

M. Weigel, W. Mack, A. Riepl:
"Nonparametric Shock Absorber Modelling Based on Standard Test Data";
Vehicle System Dynamics, 38 (2002), 6; S. 415 - 432.

Chr. Zach, W. Mack, G. Fruhmann, W. Tieber:
"On the performance of rheological shock absorber models in full vehicle simulation";
Vehicle System Dynamics, 45 (2007), 11; S. 981 - 999.

M. Zigo, E. Arslan, W. Mack, G. Kepplinger:
"Computationally effective spot-weld fatigue life estimation for vehicle components";
PAMM, 19 (2019).

M. Zigo, E. Arslan, W. Mack, G. Kepplinger:
"Efficient frequency-domain fatigue life estimation of spot welds in vehcile components";
Forschung im Ingenieurwesen, 83 (2019), S. 921 - 931.


Buchbeiträge


W. Mack, A. Steindl:
"Streiflichter zur Geschichte der "Wiener Schule der Mechanik"";
in: "Die Fakultät für Maschinenwesen und Betriebswissenschaften", Böhlau, 2015, S. 49 - 62.


Beiträge in Tagungsbänden


M. Jirout, P. Lugner, W. Mack:
"Dynamic simulation of the contact forces in the transmission link of a magnetic track-brake in low suspension";
in: "10th Mini conference on vehicle system dynamics, identification and anomalies", Vehicle system dynamics, identification and anomalies (VSDIA), Budapest, 2008, S. 199 - 206.


Vorträge und Posterpräsentationen (mit Tagungsband-Eintrag)


T. Apatay, E. Arslan, W. Mack:
"Thermally assembled shrink fit with annular inclusion and FGM-hub";
Vortrag: 89th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), München, Germany; 19.03.2018 - 23.03.2018; in: "89th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM)", Proc. Appl. Math. Mech., 18 (2018).

T. Apatay, E. Arslan, W. Mack:
"Thermally loaded elastic-plastic shink fit with FGM-hub";
Vortrag: GAMM 2017 - 88th Annual Meeting of the International Association of Applied Mathematics and Mechanics, Weimar/DE; 06.03.2017 - 10.03.2017; in: "Proceedings of the annual GAMM meeting", Proceedings in Applied Mathematics and Mechanics (PAMM) / Wiley-VCH, (2017), ISSN: 1617-7061; S. 285 - 286.

E. Arslan, T. Apatay, W. Mack:
"Effects of a temperature cycle on a rotating shrink fit with FGM-hub";
Vortrag: GAMM 2019 - 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics, Universität Wien, Austria; 18.02.2019 - 22.02.2019; in: "90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM)", Wiley, (2019).

E. Arslan, W. Mack, M. Zigo, G. Kepplinger:
"Determination of material parameters from imperfect cyclic plasticity test data";
Vortrag: GAMM 2017 - 88th Annual Meeting of the International Association of Applied Mathematics and Mechanics, Weimar/DE; 06.03.2017 - 10.03.2017; in: "Proceedings of the annual GAMM meeting", Proceedings in Applied Mathematics and Mechanics (PAMM) / Wiley-VCH, (2017), ISSN: 1617-7061; S. 385 - 386.

J. Edelmann, M. Plöchl, P. Lugner, W. Mack, A. Falkner:
"Investigations on the powerslide of automobiles";
Vortrag: 9th International Symposium on Advanced Vehicle Control, Kobe; 06.10.2008 - 09.10.2008; in: "Proceedings of AVEC'08", (2008).

M. Zigo, W. Mack, G. Kepplinger:
"Computationally effective spot-weld fatigue life estimation for vehicle components";
Vortrag: GAMM 2019 - 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics, Universität Wien, Austria; 18.02.2019 - 22.02.2019; in: "90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM)", Wiley, (2019).


Vorträge und Posterpräsentationen (ohne Tagungsband-Eintrag)


E. Arslan, W. Mack:
"Elastic limit analysis of a thick-walled cylindrical panel subject to radial heating";
Vortrag: GAMM 2012, Darmstadt/DE; 26.03.2012 - 30.03.2012.

E. Arslan, W. Mack:
"Elastic-plastic states of a rotating inhomogeneously-heated strain-hardening hollow shaft";
Vortrag: GAMM 2007, Zürich; 16.07.2007 - 20.07.2007.

E. Arslan, W. Mack, A.N. Eraslan:
"The rotating elastic-plastic hollow shaft heated at its inner surface";
Vortrag: 80th Annual Meeting of the GAMM, Danzig; 09.02.2009 - 13.02.2009.

E. Arslan, W. Mack, A.N. Eraslan:
"Transient heating of a rotating elastic-plastic solid shaft";
Vortrag: GAMM-Jahrestagung 2008 (79th Annual Meeting of the Association for Applied Mathematics and Mechanics), Bremen; 31.03.2008 - 04.04.2008.

J. Edelmann, M. Plöchl, P. Lugner, W. Mack:
"Non-regular cornering of a vehicle system";
Vortrag: Non-Smooth Dynamics, Wien (eingeladen); 11.06.2009 - 14.06.2009.

A. Falkner, W. Mack:
"Angepasste Modellierungstiefe in der Gesamtfahrzeugsimulation";
Vortrag: Mechatroniktag des Instituts für Mechanik und Mechatronik 2013, Wien; 27.09.2013.

M. Haskul, E. Arslan, W. Mack:
"Thermally loaded thick-walled cylindrically curved aluminum/steel-FGM-panel";
Vortrag: GAMM 2016, Braunschweig/DE; 07.03.2016 - 11.03.2016.

M. Jirout, P. Lugner, W. Mack:
"Dynamic simulation of the contact forces in the transmission link of a magnetic track-brake in low suspension";
Vortrag: 10th Mini-Symposium on Vehicle System Dynamics, Identification and Anomalies (VSDIA), Budapest; 06.10.2006 - 08.10.2006.

M. Jirout, W. Mack, P. Lugner:
"Non-Smooth Dynamics of a Magnetic Track Brake";
Vortrag: Non-Smooth Dynamics, Wien (eingeladen); 11.06.2009 - 14.06.2009.

J. Vilsecker, W. Mack, A. Falkner:
"Drift effects in vehicle simulation excited by wheel forces";
Vortrag: GAMM 2010 - 81st Annual Meeting of the International Association of Applied Mathematics and Mechanics, Karlsruhe; 22.03.2010 - 26.03.2010.

J. Vilsecker, W. Mack, A. Falkner, R. Hanfstingl:
"On the complexity of hydromount-models in full vehicle simulation";
Vortrag: GAMM 2011, Graz; 18.04.2011 - 21.04.2011.


Diplom- und Master-Arbeiten (eigene und betreute)


E. Baykal:
"Auswertung und Analyse von Fahrkomfortmessungen";
Betreuer/in(nen): W. Mack; Institut für Mechanik und Mechatronik, E325/A1, 2012.

H. Berger:
"Rheologische Dämpfermodelle für den Einsatz in der MKS-Simulation";
Betreuer/in(nen): W. Mack; Institut für Mechanik und Mechatronik, 2002.

T. Ferdigg:
"Einfluss der Elastomerlagermodelle auf simuliertes Eigenfrequenz- und Schwingverhalten von Achs-Subsystemen";
Betreuer/in(nen): W. Mack; Institut für Mechanik und Mechatronik E325-01, 2021.

A. John:
"Einfluss der Modelle passiver Hydrolager auf die Ergebnisse von Gesamtfahrzeugsimulationen";
Betreuer/in(nen): W. Mack; Institut für Mechanik und Mechatronik, 2002.

M. Metzler:
"Optimale Modell-Fesselung in der nabenkrafterregten Fahrzeugsimulation";
Betreuer/in(nen): W. Mack; Institut für Mechanik und Mechatronik E325/A1, 2015.

M. Mitsch:
"Untersuchung zur Chargenstreuung passiver Hydrolager und zur Charakterisierung ihres Verhaltens durch die Standardkenngrößen cdyn und δ";
Betreuer/in(nen): W. Mack; Institut für Mechanik und Mechatronik E325/A1, 2008.

K. Rozana:
"Vergleich von Gummilagermodellen in der MKS";
Betreuer/in(nen): W. Mack; Institut für Mechanik und Mechatronik, E325-01, 2019.

M. Schwarzbart:
"On Stability Problems of the Space Elevator";
Betreuer/in(nen): A. Steindl, W. Mack; Institut für Mechanik und Mechatronik, 2007; Abschlussprüfung: 21.05.2007.

L. Vasko:
"Erstellung eines grundlegenden Trimmed-Body Modells zur Fahrkomfortberechnung in Mehrkörpersimulationen";
Betreuer/in(nen): W. Mack; Institut für Mechanik und Mechatronik, E325-01, 2020.

J. Vilsecker:
"Abdrifteffekte in der nabenkrafterregten Fahrzeugsimulation";
Betreuer/in(nen): W. Mack; Institut für Mechanik und Mechatronik, Abteilung Fahrzeugdynamik und Biomechanik, 2009.

Yenilmez:
"Kenngrößendarstellung von Struktur- und Parametervariationen: Untersuchungen mittels eines hybriden Gesamtfahrzeugmodells";
Betreuer/in(nen): W. Mack; Institut für Mechanik und Mechatronik, A1 - Fahrzeugdynamik und Biomechanik, 2010.

Chr. Zach:
"Vergleichende Bewertung rheologischer Dämpfermodelle in der Vollfahrzeugsimulation";
Betreuer/in(nen): W. Mack; Institut für Mechanik und Mechatronik, 2006.


Wissenschaftliche Berichte


E. Arslan, M. Zigo, G. Kepplinger, W. Mack, A. Falkner:
"An algorithm of fatigue life estimation for random vibration based on direct power spectral density (PSD) definition in frquency domain";
Bericht für Magna Steyr; 2015.

E. Arslan, M. Zigo, W. Mack, G. Kepplinger:
"Further studies on cyclic plasticity in strength analysis of vehicle components";
Bericht für Magna-Steyr Graz; Berichts-Nr. 2015/319, 2016; 54 S.

F. Hohensinn, W. Mack:
"Mechanische Untersuchung und festigkeitstechnische Auslegung des Öffnungsmechanismus eines neuartigen Raddepots";
Bericht für Raddepot S&E GmbH; 2013.

T. Kniffka, W. Mack:
"Berechnung der Kräfte im Hebemechanismus und Festigkeitsberechnungen von Verbindungselementen für einen Stuhl mit integrierter Aufstehhilfe";
Bericht für Camarg OG; 2013.

M. Mitsch, W. Mack:
"Erstellen eines Standardprüfprogramms zur Validierung von Hydrolagermodellen";
Bericht für MAGNA STEYR, Graz; 2008.

M. Mitsch, W. Mack:
"Untersuchung zur Chargenstreuung passiver Hydrolager, Elastomerlager und Stoßdämpfer";
Bericht für MAGNA STEYR; 2007.