Suchparameter:
  • Suche in Publikations-Datensätzen nach: "A Otto" ("A Otto" als Name interpretiert)
  • Textsuche eingeschränkt auf Datenfelder: Gesamter Datensatz
  • Suche eingeschränkt auf Publikationsarten: Alle
  • Suche eingeschränkt auf Zeitraum: Alle Daten in der Datenbank
Mit Ihren Suchparametern wurden 44 passende Datensätze gefunden:
44 - Fakultät für Maschinenwesen und Betriebswissenschaften




Zeitschriftenartikel:


  1. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    F. Bammer, T. Schumi, A. Otto, D. Schuöcker:
    "Laser Assisted Bedning for Efficient Light-Weight-Production";
    Tehnicki Vjesnik-Technical Gazette, 18 (2011), ISSN: 1330-3651; S. 571 - 576.

    Zusätzliche Informationen

  2. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    R. Bielak, F. Bammer, A. Otto, C. Stiglbrunner, C. Colasse, S. Murzin:
    "Simulation of forming processes with local heating of dual phase steels with use of laser beam shaping systems";
    Journal of Computer Optics, 40 (2016), 5; S. 659 - 667.

    Zusätzliche Informationen

  3. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    F. Bleicher, F. Haas, A. Otto, K. Zeman:
    "Production Systems";
    ÖWGP - New Deal in Production (eingeladen), July (2021), July; S. 18 - 25.

  4. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    M. Buttazzoni, C. Zenz, A. Otto, R. Gómez Vázquez, G. Liedl, J. Arias:
    "A Numerical Investigation of Laser Beam Welding of Stainless Steel Sheets with a Gap";
    Applied Sciences (eingeladen), 11 (2021), 6.

    Zusätzliche Informationen

  5. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    D. Kumar, G. Liedl, A. Otto, W. Artner:
    "Insights into the Correlation between Residual Stresses, Phase Transformation, and Wettability of Femtosecond Laser-Irradiated Ductile Iron";
    Nanomaterials, 12 (2022), 1271; 11 S.

    Zusätzliche Informationen

  6. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    D. Kumar, M. Sauer, K. Kroechert Ching, G. Kalss, A. dos Santos, G. Ramer, A. Foelske-Schmitz, B. Lendl, G. Liedl, A. Otto:
    "Wettability transition of femtosecond laser patterned nodular cast iron (NCI) substrate";
    Applied Surface Science, 559 (2021), 149897.

    Zusätzliche Informationen

  7. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    K. Leitz, H. Koch, A. Otto et al.:
    "Numerical simulation of process dynamics during laser beam drilling with short pulses";
    Applied Physics A: Materials Science & Processing, Volume 105 (2011), 4; 7 S.

    Zusätzliche Informationen

  8. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    K. Leitz, B. Redlingshöfer, Y. Reg, A. Otto, M Schmidt:
    "Metal Ablation with Short and Ultrashort Laser Pulses";
    Physics Procedia, Part 2 (2011), ISSN: 1875-3892; S. 230 - 238.

    Zusätzliche Informationen

  9. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    A. Otto, R. Ebert:
    "Simulationsgestützte Analyse des Übergangs zwischen Laser-strahlschweißen und -abtragsschneiden";
    Journal of the University of Applied Sciences Mittweida (eingeladen), 4 (2015), S. 56 - 59.

    Zusätzliche Informationen

  10. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    A. Otto, R. Gómez Vázquez, U. Hartel:
    "Insight into the Process: Analysis of laser beam welding by means of multiphysical process simulations";
    Laser Technik Journal (eingeladen), AKL'18 International Laser Technology Congress (2018), 15/2; S. 40 - 45.

    Zusätzliche Informationen

  11. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    A. Otto, H. Koch et al.:
    "Numerical Simulation - A Versatile Approach for Better Understanding Dynamics in Laser Material Processing";
    Physics Procedia (eingeladen), Part 2 (2011), ISSN: 1875-3892; S. 11 - 20.

    Zusätzliche Informationen

  12. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    A. Otto, A. Patschger, M. Seiler:
    "Numerical and Experimental Investigations of Humping Phenomena in Laser Micro Welding";
    Physics Procedia, 83 (2016), S. 1415 - 1423.

    Zusätzliche Informationen

  13. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    S. Tatra, R. Gómez Vázquez, C. Stiglbrunner, A. Otto:
    "Numerical Simulation of Laser Ablation with Short and Ultra-short Pulses for Metals and Semiconductors";
    Physics Procedia, 83 (2016), S. 1339 - 1346.

    Zusätzliche Informationen

  14. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    Y. Tsai, K. Leitz, A. Otto et al.:
    "Parallel optical trap assisted nanopatterning on rough surfaces";
    Nanotechnology, 1 (2012), 23; S. 1 - 5.

    Zusätzliche Informationen


Beiträge in Tagungsbänden:


  1. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    F. Bammer, T. Schumi, A. Otto, D. Schuöcker:
    "Laser Assisted Bending For Efficient Light-Weight-Production";
    in: "MOTSP 2011", University of Zagreb, 2011, ISBN: 978-953-7738-10-5, S. 375 - 380.

    Zusätzliche Informationen


Vorträge und Posterpräsentationen (mit Tagungsband-Eintrag):


  1. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    R. Bielak, S. Murzin, G. Liedl, A. Otto et al.:
    "Modelling of temperature fields in DP1000 steel during laser treatment using diffractive optical elements";
    Vortrag: 2020 International Conference on Information Technology and Nanotechnology (ITNT), Samara; 26.05.2020 - 29.05.2020; in: "Journal of Physics: Conference Series", IOP, 1745 (2020), ISBN: 978-1-7281-7041-1; Paper-Nr. 012016, 8 S.

    Zusätzliche Informationen

  2. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    P. Drobniak, A. Otto, R. Gómez Vázquez, R. Arias, J. Arias:
    "Simulation of keyhole laser welding of stainless steel plates with a gap";
    Vortrag: 11th CIRP Conference on Photonic Technologies [LANE 2020], Online; 07.09.2020 - 10.09.2020; in: "Procedia CIRP 94", M. Schmidt, F. Vollertsen, E. Govekar (Hrg.); Elsevier, (2020), ISSN: 2212-8271; S. 731 - 736.

    Zusätzliche Informationen

  3. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    R. Gómez Vázquez, H. Koch, A. Otto:
    "Multi-physical Simulation of Laser Welding";
    Vortrag: LANE 2014, Fürth (Deutschland); 08.09.2014 - 11.09.2014; in: "8th International Conference on Laser Assisted Net Shape Engineering LANE 2014", Physics Procedia / Elsevier, Volume 56 (2014), ISSN: 1875-3892; 9 S.

    Zusätzliche Informationen

  4. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    R. Gómez Vázquez, A. Otto, G. Liedl, R. Feichtenschlager:
    "Simulation of Laser Welding of Dissimilar Metals";
    Vortrag: Lasers in Manufacturing 2015, München; 22.06.2015 - 25.06.2015; in: "Lasers in Manufacturing 2015", (2015), 8 S.

    Zusätzliche Informationen

  5. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    R. Gómez Vázquez, A. Otto, G. Liedl, R. Feichtenschlager, C. Stiglbrunner:
    "Simulation of laser welding aluminum-to-steel";
    Hauptvortrag: 11th International Seminar "Numerical Analysis of Weldability", Graz - Castle Seggau; 27.09.2015 - 30.09.2015; in: "Mathematical Modelling of Weld Phenomena 11", Verlag der Technischen Universität Graz, 11 (2016), ISBN: 978-3-85125-490-7; S. 99 - 108.

    Zusätzliche Informationen

  6. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    R. Gómez Vázquez, A. Otto, J. Peternel:
    "Recent Advances in the Multiphysical Simulation of Laser Assisted Manufacturing Processes";
    Vortrag: LiM - Lasers in Manufacturing 2017, München (eingeladen); 26.06.2017 - 29.06.2017; in: "Proceedings of the LiM 2017", (2017), Paper-Nr. 181, 12 S.

    Zusätzliche Informationen

  7. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    H. Koch, R. Gómez Vázquez, A. Otto:
    "A multiphysical simulation model for laser based manufacturing";
    Vortrag: ECCOMAS 2012 (European Congress on Computational Methods in Applied Sciences and Engineering, Wien; 10.09.2012 - 14.09.2012; in: "Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering", TU Wien, Wien (2012), ISBN: 978-3-9502481-9-7; 14 S.

  8. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    H. Koch, R. Gómez Vázquez, A. Otto:
    "Analysis of Distortion Effects on Weld Pool Dynamics in Laser Beam Welding";
    Vortrag: IWOTE 2014, Bremen (Deutschland); 09.04.2014 - 10.04.2014; in: "Proceedings of the IWOTE 2014: International Workshop on Thermal Forming and Welding Distortion", Strahltechnik / BIAS Verlag, Volume 54 / 2014 / Bremmen (2014), ISBN: 978-3-933762-48-1; S. 165 - 172.

    Zusätzliche Informationen

  9. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    H. Koch, R. Gómez Vázquez, A. Otto:
    "Multiphysical Simulation of Laser Material Processing";
    Vortrag: Lane 2012, Erlangen, BRD (eingeladen); 12.11.2012 - 15.11.2012; in: "Physics Proceedia", A. Otto (Hrg.); Elsevier, Volume 39 (2012), Paper-Nr. 1875-3892, 9 S.

    Zusätzliche Informationen

  10. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    K. Leitz, H. Koch, A. Otto et al.:
    "Numerical Simulation of Drilling with Pulsed Beams";
    Vortrag: Lane 2012, Erlangen, BRD; 12.11.2012 - 15.11.2012; in: "Physics Procedia", Elsevier, Volume 39 (2012), 9 S.

    Zusätzliche Informationen

  11. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    G. Liedl, H. Koch, A. Otto:
    "Fügen mit Laserstrahlung";
    Vortrag: Fügetechnik in Österreich, Graz (eingeladen); 10.04.2013; in: "Fügetechnik in Österreich", N. Enzinger (Hrg.); Schweiss- und Prüftechnik, (2013), S. 36 - 40.

    Zusätzliche Informationen

  12. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    M. Meunier, A. Otto, R. Gómez Vázquez, J. Arias, R. Fernández, G. Pallier, P. Jian, O. Pinel, G. Labroille:
    "Freeform Beam Shaping with Multi-Plane Light Conversion for 1.07µm Ultra-High Throughput Laser-Based Material Macroprocessing";
    Vortrag: International Congress on Applications of Lasers & Electro-Optics ICALEO 2019, Orlando, USA; 07.10.2019 - 10.10.2019; in: "Proceedings of ICALEO 2019", (2019), Paper-Nr. # 0339_0501_000175, 8 S.

  13. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    S. Murzin, N. Kazanskiy, G. Liedl, A. Otto, R. Bielak:
    "Laser beam shaping for modification of materials with ferritic-martenistic structure";
    Vortrag: 3rd International Conference Information Technology and Nanotechnology, ITNT, Samara, RF; 25.04.2017 - 27.04.2017; in: "Procedia Engineering", Elsevier, 201 (2017), S. 164 - 168.

    Zusätzliche Informationen

  14. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    A. Otto, R. Gómez Vázquez:
    "Fluid Dynamical Simulation of High Speed Micro Welding";
    Vortrag: ICALEO 2017, Atlanta, USA (eingeladen); 26.10.2017 - 27.10.2017; in: "2017 ICALEO Conference Proceedings (online)", Journal of Laser Applications, 30/032411 (2018), ISBN: 9781940168142; Paper-Nr. M601, 9 S.

    Zusätzliche Informationen

  15. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    A. Otto, R. Gómez Vázquez, U. Hartel, S. Mosbah:
    "Numerical analysis of process dynamics in laser welding of Al and Cu";
    Vortrag: 10th CIRP Conference on Photonic Technologies [LANE 2018], Fürth, Germany; 03.09.2018 - 06.09.2018; in: "Procedia CIRP", Procedia CIRP /, 74 (2018), ISSN: 2212-8271; S. 691 - 695.

    Zusätzliche Informationen

  16. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    A. Otto, H. Koch, R. Gómez Vázquez et al.:
    "Multiphysical Simulation of ns-Laser Ablation of Multi-material LED-structures";
    Vortrag: LANE 2014, Fürth (Deutschland); 08.09.2014 - 11.09.2014; in: "8th International Conference on Laser Assisted Net Shape Engineering LANE 2014", Physics Procedia / Elsevier, Volume 56 (2014), ISSN: 1875-3892; 10 S.

    Zusätzliche Informationen

  17. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    S. Tatra, A. Otto, R. Gómez Vázquez:
    "Computational Study on the Effect of the Pulse Length on Laser Ablation Processes";
    Vortrag: Lasers in Manufacturing 2015, München; 22.06.2015 - 25.06.2015; in: "Lasers in Manufacturing 2015", (2015), 8 S.

    Zusätzliche Informationen


Vorträge und Posterpräsentationen (ohne Tagungsband-Eintrag):


  1. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    R. Gómez Vázquez, A. Otto:
    "Improving Laser Manufacturing Processes B y Means of Multiphysics Simulations";
    Vortrag: International Symposium for Production Research, Vienna (eingeladen); 13.09.2017 - 15.09.2018.

    Zusätzliche Informationen

  2. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    R. Gómez Vázquez, A. Otto, G. Liedl, R. Feichtenschlager, C. Stiglbrunner, S. Tatra:
    "Simulation of the Dissimilar Joining Process of Aluminum and Steel by Laser Assisted Wetting";
    Vortrag: 12th International Conference on Numerical Methods in Industrial Forming Processes NUMIFORM 2016, University of Technology of Troyes, Troyes (France); 04.07.2016 - 07.07.2016.

    Zusätzliche Informationen

  3. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    H. Koch, C. Kägler, A. Otto, M Schmidt:
    "Analysis of Welding Zinc Coated Steel Sheets in Zero Gap Gonfiguration by 3D Simulations and High Speed Imaging";
    Vortrag: IV International WLT Conference on Lasers in Manufacturing, Munich; 23.05.2011 - 26.05.2011.

    Zusätzliche Informationen

  4. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    K. Leitz, B. Redlingshöfer, Y. Reg, A. Otto et al.:
    "Metal Ablation with Short and Ultrashort Laser Pulses";
    Vortrag: 6th International WLT Conference on Lasers in Manufacturing, München (eingeladen); 23.05.2011 - 26.05.2011.

    Zusätzliche Informationen

  5. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    Z. Lin, J. Kleinert, S. Tatra, R. Gómez Vázquez, R. Bielak, A. Otto:
    "3D Numerical Modeling of Short Pulsed Laser Micromachining Applications";
    Vortrag: ICALEO 2017, Atlanta, USA; 26.10.2017 - 27.10.2017.

    Zusätzliche Informationen

  6. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    A. Otto:
    "Process Simulations for Optimizing and Planning Laser Material Processing";
    Vortrag: Photonics 4 Industrial Production, Marriott Courtyard, Vienna, Austria (eingeladen); 29.10.2018.

  7. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    A. Otto, R. Gómez Vázquez:
    "Fluid dynamical defect mechanisms in laser beam welding";
    Vortrag: LPM2019 - The 20th International Symposium on Laser Precision Microfabrication, International Conference Center Hiroshima, Japan (eingeladen); 21.05.2019 - 24.05.2019.

  8. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    A. Otto, R. Gómez Vázquez:
    "Multiphysical Approach for the Simulation of Powder-based Laser Additive Manufacturing Processes";
    Vortrag: OSA Laser Congress 2019, Vienna (eingeladen); 29.09.2019 - 03.10.2019.

  9. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    A. Otto, R. Gómez Vázquez et al.:
    "Modelling and Simulation of Laser Material Processes - Potentials of Numerical Simulations for Understanding, Planning and Optimizing Laser Welding Processes";
    Vortrag: LASER World of PHOTONICS 2019 - Application Panel "Lasers Materials Processing - Modelling and Simulation of Laser Material Processes", Munich, Germany (eingeladen); 24.06.2019 - 27.06.2019.

  10. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    A. Otto, H. Koch et al.:
    "Numerical Simulation - A Versatile Approach for Better Understanding Dynamics in Laser Material Processing";
    Vortrag: 6th International WLT Conference on Lasers in Manufacturing, München (eingeladen); 23.05.2011 - 26.05.2011.

    Zusätzliche Informationen

  11. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    A. Wohltan, M. Ionce, N. Neuwirth, P. Widauer, E. Pils, I. Schreiber, R. Gómez Vázquez, C. Stiglbrunner, A. Otto:
    "Optimisation of Data Compression of OpenFOAM Simulations Utilising a Newly Developed Approach";
    Vortrag: 12th International Conference on Numerical Methods in Industrial Forming Processes NUMIFORM 2016, University of Technology of Troyes, Troyes (France); 04.07.2016 - 07.07.2016.

    Zusätzliche Informationen


Diplom- und Master-Arbeiten (eigene und betreute):


  1. Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften

    J. Peternel:
    "Model of Powder Deposition and Melting of the Melt Pool Surface";
    Betreuer/in(nen): E. Govekar, A. Otto; Institut für Fertigungstechnik und Hochleistungslasertechnik, 2017; Abschlussprüfung: 09/2017.