Search parameters:
- Search in name records for: "Liedl Gerhard" ("Gerhard Liedl" interpreted as a name)
- Search restricted to types of publications: All
- Search restricted to time interval All data in the database
166 matching records have been found with your search parameters:
2 |
- Faculty of Physics |
4 |
- Faculty of Chemistry |
159 |
- Faculty of Mechanical and Industrial Engineering |
1 |
- Faculty of Electrical Engineering and Information Technology |
Zeitschriftenartikel:
- Source: Faculty of Mechanical and Industrial Engineering
C. F. Barbatti, J. Garcia, G. Liedl, A. Pyzalla:
"Joining of cemented carbides to steel by laser beam welding";
Materialwissenschaft und Werkstofftechnik,
38
(2007),
11;
908
- 914.
More information
- Source: Faculty of Mechanical and Industrial Engineering
M. Buttazzoni, C. Zenz, A. Otto, R. Gómez Vázquez, G. Liedl, J. Arias:
"A Numerical Investigation of Laser Beam Welding of Stainless Steel Sheets with a Gap";
Applied Sciences (invited),
11
(2021),
6.
More information
- Source: Faculty of Chemistry
C. Edtmaier, J. Segl, E. Rosenberg, G. Liedl, R. Pospichal, A. Steiger-Thirsfeld:
"Microstructural characterization and quantitative analysis of the interfacial carbides in Al(Si)/diamond composites";
Journal of Materials Science,
53
(2018),
22;
15514
- 15529.
- Source: Faculty of Mechanical and Industrial Engineering
R Fürbacher, G. Liedl, S. Murzin:
"Experimental study of spatial frequency transition of laser induced periodic surface structures";
Journal of Physics: Conference Series,
1745
(2021),
7 pages.
More information
- Source: Faculty of Mechanical and Industrial Engineering
B. Geringer, D. Klawatsch, J. Graf, H.-P. Lenz, G. Liedl, D. Schuöcker, W.F. Piock, M. Jetzinger, P. Kapus:
"Laserzündung - Ein neuer Weg für den Ottomotor";
Motortechnische Zeitschrift (MTZ) (invited),
65 Jahrgang
(2004),
3;
214
- 219.
More information
- Source: Faculty of Mechanical and Industrial Engineering
J. Gumpinger, S. Felber, G. Liedl:
"Mechanisch-technologische Eigenschaften der Titanlegierung Ti-6Al-4V hergestellt mit Selective Laser Melting (SLM)";
Schweiss-&Prüftechnik,
11/12
(2013),
184
- 190.
More information
- Source: Faculty of Mechanical and Industrial Engineering
A. Kaplan, G. Liedl et al.:
"Laser dispersing of TiC-Powder into Al-Substrates";
Lasers in Engineering,
7
(1998),
3-4;
165
- 178.
- Source: Faculty of Mechanical and Industrial Engineering
D. Kumar, G. Liedl, S. Gururaja:
"Formation of sub-wavelength laser induced periodic surface structure and wettability transformation of CFRP laminates using ultra-fast laser";
Materials Letters,
276
(2020).
More information
- Source: Faculty of Mechanical and Industrial Engineering
D. Kumar, G. Liedl, A. Otto, W. Artner:
"Insights into the Correlation between Residual Stresses, Phase Transformation, and Wettability of Femtosecond Laser-Irradiated Ductile Iron";
Nanomaterials,
12
(2022),
1271;
11 pages.
More information
- Source: Faculty of Mechanical and Industrial Engineering
D. Kumar, M. Sauer, K. Kroechert Ching, G. Kalss, A. dos Santos, G. Ramer, A. Foelske-Schmitz, B. Lendl, G. Liedl, A. Otto:
"Wettability transition of femtosecond laser patterned nodular cast iron (NCI) substrate";
Applied Surface Science,
559
(2021),
149897.
More information
- Source: Faculty of Mechanical and Industrial Engineering
N. Lasemi, Ch. Rentenberger, G. Liedl, D. Eder:
"The influence of fluid nature on femtosecond laser ablation properties of SiO2/Si target and synthesis of ultrafine-grained Si nanoparticles";
Nanoscale Advances,
2
(2020),
3991
- 4002.
More information
- Source: Faculty of Mechanical and Industrial Engineering
N. Lasemi, Ch. Rentenberger, R. Pospichal, A. Cherevan, M. Pfaffeneder-Kmen, G. Liedl, D. Eder:
"Femtosecond laser-assisted synthesis of Ni/Au BONs in various alcoholic solvents";
Applied Physics A: Materials Science & Processing,
125
(2019),
8.
More information
- Source: Faculty of Mechanical and Industrial Engineering
N. Lasemi, G. Rupprechter, G. Liedl, D. Eder:
"Near-Infrared Femtosecond Laser Ablation of Au-Coated Ni: Effect of Organic Fluids andWater on Crater Morphology, Ablation Efficiency and Hydrodynamic Properties of NiAu Nanoparticles";
Materials,
14
(2021),
5544.
More information
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl:
"Das Institut für Spanlose Fertigung und Hochleistungslasertechnik der TU Wien";
Schweiss-&Prüftechnik (invited),
12
(2002),
196
- 198.
More information
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl, R. Bielak et al.:
"Joining of Aluminum and Steel in Car Body Manufacturing";
Physics Procedia,
Amsterdam
(2011),
ISSN: 1875-3892;
150
- 156.
More information
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl, R. Gómez Vázquez, S. Murzin:
"Joining of aluminium alloy and steel by laser assisted reactive wetting";
Lasers in Manufacturing and Materials Processing,
5
(2017),
1;
1
- 15.
More information
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl, A. Kratky:
"Leichtes Umformen mit Laserlicht";
Automotive Materials (invited),
02
(2007),
26
- 28.
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl, R. Pospichal, S. Murzin:
"Features of Changes in the Nanostructure and Colorizing of Copper during Scanning with a Femtosecond Laser Beam";
Journal of Computer Optics,
41
(2017),
4;
504
- 509.
More information
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl, K. Schröder et al.:
"Excimer Laser Processing of Ferrite Video Heads";
Applied Surface Science,
106
(1996),
374
- 378.
- Source: Faculty of Mechanical and Industrial Engineering
T. Muhic, L Kosec, G. Liedl et al.:
"Assessment of the Effect of Nd:YAG Laser Pulse Operating Parameters on the Metallurgical Characteristics of Different Tool Steels using DOE Software";
METALURGIJA,
50
(2011),
2;
101
- 105.
More information
- Source: Faculty of Mechanical and Industrial Engineering
S. Murzin, V. Balyakin, G. Liedl, A. Melnikov, R Fürbacher:
"Improving Tribological Properties of Stainless Steel Surfaces by Femtosecond Laser Irradiation";
Coatings (invited),
10
(2020),
7.
More information
- Source: Faculty of Mechanical and Industrial Engineering
S. Murzin, R. Bielak, G. Liedl:
"Algorithm for calculation of the power density distribution of the laser beam to create a desired thermal effect on technological objects";
Journal of Computer Optics,
40
(2016),
5;
679
- 684.
More information
- Source: Faculty of Mechanical and Industrial Engineering
S. Murzin, G. Liedl:
"Laser welding of dissimilar metallic materials with use of diffractive optical elements";
Computer Optics,
41
(2017),
6;
848
- 855.
More information
- Source: Faculty of Mechanical and Industrial Engineering
S. Murzin, G. Liedl, R. Pospichal:
"Coloration of a copper surface by nanostructuring with femtosecond laser pulses";
Optics and Laser Technology,
119
(2019).
More information
- Source: Faculty of Mechanical and Industrial Engineering
H. Pasic, M. Pudar, N. Enzinger, J. Ivanova, J. Bruckner, S. Hampel, G. Liedl, W. Karner, G. Figner, T. Weirather, A. Leitner:
"Einsatz unterschiedlicher Schweißverfahren zum Verbinden von Stahl mit Aluminium im Karosseriebau";
Schweiss-&Prüftechnik,
Sonderband
(2009),
25
- 27.
More information
- Source: Faculty of Mechanical and Industrial Engineering
R. Pospichal, R. Bielak, G. Liedl:
"SCWTEX - Simultaneous Cutting And Welding Of Textiles";
ACTA TECHNICA CORVINIENSIS - Bulletin of Engineering,
1
(2012),
117
- 121.
More information
- Source: Faculty of Mechanical and Industrial Engineering
R. Pospichal, G. Liedl:
"Laser ablation of polyethylene terephthalate non-woven fabrics";
Annals Of Faculty Engineering Hunedoara - International Journal Of Engineering,
1
(2014),
12;
63
- 68.
More information
- Source: Faculty of Mechanical and Industrial Engineering
R. Pospichal, G. Liedl:
"Simulation of periodic nanostructures fabricated by multi-beam interference of an ultra-short pulse laser";
Tehnicki Vjesnik-Technical Gazette,
20
(2013),
1;
131
- 136.
More information
- Source: Faculty of Mechanical and Industrial Engineering
R. Pospichal, G. Liedl:
"Simulation Of The Resulting Intensity Distribution By Multi‐beam Interference Of An Ultra‐short Pulse Laser";
ACTA TECHNICA CORVINIENSIS - Bulletin of Engineering,
5
(2012),
4;
85
- 90.
More information
- Source: Faculty of Mechanical and Industrial Engineering
K. Schröder, G. Liedl et al.:
"Measurement and Modelling of Ozone and NOx Emissions during CO2 Laser Beam Welding";
Lasers in Engineering,
5
(1997),
313
- 328.
- Source: Faculty of Mechanical and Industrial Engineering
K. Wichart, J. Ivanova, J. Bruckner, N. Enzinger, G. Figner, G. Liedl, H. Basalka, A. Leitner:
"Einsatz von Bimetallen für Hybridverbindungen";
Schweiss-&Prüftechnik,
Sonderband
(2009),
28
- 31.
More information
Buchbeiträge:
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl:
"Laser Micromachining";
in: "Lasers in Chemistry",
M. Lackner (ed.);
Wiley-VCH,
2008,
ISBN: 978-3-527-31997-8,
923
- 941.
Beiträge in Tagungsbänden:
- Source: Faculty of Mechanical and Industrial Engineering
R. Bielak, G. Liedl:
"FEM analysis of debonding problems during bi-metal wire joining of aluminum and steel sheets";
in: "Internetový časopis MATERIALS SCIENCE AND TECHNOLOGY",
issued by: Faculty of Materials Science and Technolgy;
Materials Science and Technology,
Trnava,
2011,
ISSN: 1335-9053,
83
- 88.
More information
- Source: Faculty of Mechanical and Industrial Engineering
D. Kumar, K. Kroechert Ching, G. Kalss, G. Liedl:
"Femtosecond laser structuring of nodular cast iron for anticorrosion and thermally stable superhydrophobic surface";
in: "Lasers in Manufacturing Conference",
issued by: WLT;
WLT - Wissenschaftliche Gesellschaft Lasertechnik e.V.,
2021,
6 pages.
More information
- Source: Faculty of Mechanical and Industrial Engineering
M. Lackner, M. Schwarzott, G. Liedl et al.:
"Heat transfer to a single plastic resin particle - Experimental investigations by flames and laer pulses";
in: "3rd European Combustion Meeting ECM 2007",
issued by: MediterraneanAgronomic Institute of Chania, Greece;
European Combustion Meeting 2007,
Chania, Greece,
2007,
Paper ID 16-12,
6 pages.
More information
- Source: Faculty of Mechanical and Industrial Engineering
S. Murzin, N. Kazanskiy, G. Liedl, G. Humenberger:
"Testing of diffractive optical element as part of specific CO2 laser equipment for metallic materials modification";
in: "Journal of Physics: Conference Series",
1368;
issued by: IOPScience;
IOP Publishing,
2019.
More information
- Source: Faculty of Mechanical and Industrial Engineering
S. Murzin, G. Liedl, R. Bielak:
"Redistribution of the laser beam power using diffractive optical elements";
in: "Proceedings of SPIE - Optical Technologies for Telecommunications, vol. 10342",
103420G;
V. Andreev, A. Bourdine, V. Burdin, O. Morozov, A. Sultanov (ed.);
issued by: SPIE;
SPIE,
Pellingham, Washington, USA,
2017,
ISBN: 9781510611337,
45
- 52.
More information
- Source: Faculty of Mechanical and Industrial Engineering
S. Murzin, G. Liedl, R. Bielak, A. Melnikov:
"Conditions improving of laser heating for forming of materials with a ferritic-martensitic structure";
in: "Journal of Physics: Conference Series",
1368;
issued by: IOPScience;
IOP Publishing,
2019.
More information
- Source: Faculty of Mechanical and Industrial Engineering
S. Murzin, G. Liedl, R. Pospichal:
"Colorization of copper surfaces by nanostructure modifications with ultrashort laser pulses";
in: "Journal of Physics: Conference Series",
1368;
issued by: IOPScience;
IOP Publishing,
2019.
More information
Vorträge und Posterpräsentationen (mit Tagungsband-Eintrag):
- Source: Faculty of Mechanical and Industrial Engineering
F. Bammer, R. Bielak, B. Holzinger, A. Kratky, G. Liedl, M. Kaltenbrunner, D. Schuöcker:
"New Developments in Lasers Assisted Forming";
Talk: ICONO/LAT Conference 2005,
St. Petersburg Russia (invited);
2005-05-11
- 2005-05-15; in: "Icono/Lat 2005",
(2005).
More information
- Source: Faculty of Mechanical and Industrial Engineering
F. Bammer, R. Petkovsek, H. Dominguez, G. Liedl:
"Nd:YAG-Laser-Q-switching with a Photo-Elastic Modulator and Applications";
Talk: Photonics Europe 2010,
Brüssel;
2010-04-12
- 2010-04-16; in: "Proceedings of SPIE, Solid State Lasers and Amüplifiers IV, and High-Power Lasers",
SPIE Proceedings,
Vol. 7721
(2010),
ISBN: 978-0-8194-8194-8;
77210Y-1
- 77210Y-6.
More information
- Source: Faculty of Mechanical and Industrial Engineering
R. Bielak, F. Bammer, G Schuöcker, G. Liedl, A. Kratky:
"Virtual age in education and training";
Poster: LANE 2004,
Erlangen;
2004-09-21
- 2004-09-24; in: "Proceedings of the 4th LANE",
Meisenbach Bamberg,
(2004),
ISBN: 3-87525-202-0;
1221
- 1226.
- Source: Faculty of Mechanical and Industrial Engineering
R. Bielak, G. Liedl, M. Behúlová:
"Contribution to the lightweight alloy warm tube hydroforming";
Talk: Comec 2010 : VI Conferencia Cientifica Internacional de Ingeniería Mecánica,
Villa Clara, Cuba;
2010-11-02
- 2010-11-04; in: "COMEC 2010",
(2010),
ISBN: 978-959-250-602-2.
- Source: Faculty of Mechanical and Industrial Engineering
R. Bielak, G. Liedl, R. Pospichal:
"FEM simulation of technical textiles laser cuting";
Talk: 12th International Conference Technology,
Bratislava;
2011-09-13; in: "Technology 2011",
Slovak University of Technology,
Bratislava
(2011),
ISBN: 978-80-227-3545-2;
371
- 376.
More information
- Source: Faculty of Mechanical and Industrial Engineering
R. Bielak, S. Murzin, G. Liedl, A. Otto et al.:
"Modelling of temperature fields in DP1000 steel during laser treatment using diffractive optical elements";
Talk: 2020 International Conference on Information Technology and Nanotechnology (ITNT),
Samara;
2020-05-26
- 2020-05-29; in: "Journal of Physics: Conference Series",
IOP,
1745
(2020),
ISBN: 978-1-7281-7041-1;
Paper ID 012016,
8 pages.
More information
- Source: Faculty of Mechanical and Industrial Engineering
R Fürbacher, G. Liedl:
"Investigations on the wetting and deicing behavior of laser treated hydrophobic steel surfaces";
Keynote Lecture: Laser-based Micro- and Nanoprocessing,
online only (invited);
2021-03-05; in: "Proceedings SPIE",
SPIE,
11674
(2021),
Paper ID 1167417,
10 pages.
More information
- Source: Faculty of Mechanical and Industrial Engineering
B. Geringer, J. Graf, D. Klawatsch, H.-P. Lenz, G. Liedl, D. Schuöcker, W.F. Piock, M. Jetzinger, P. Kapus:
"Direkteinspritzender Ottomotor und Laserzündung";
Talk: 5. Dresdner Motorenkolloquium,
Dresden (invited);
2003-06-05
- 2003-06-06; in: "5. Dresdner Motorenkolloquium ",
(2003),
ISSN: 1433-4135;
15
- 23.
More information
- Source: Faculty of Mechanical and Industrial Engineering
B. Geringer, J. Graf, D. Klawatsch, H.-P. Lenz, G. Liedl, D. Schuöcker, W.F. Piock, M. Jetzinger, P. Kapus:
"Laserinduzierte Zündung an einem Otto-DI-Brennverfahren der zweiten Generation";
Talk: 24. Internationales Wiener Motorensymposium,
Wien (invited);
2003-05-15
- 2003-05-16; in: "24. Internationales Wiener Motorensymposium 15.- 16. Mai 2003",
H.-P. Lenz (ed.);
VDI Verlag GmbH,
Düsseldorf
(2003),
ISBN: 3-18-353912-8;
87
- 109.
More information
- Source: Faculty of Mechanical and Industrial Engineering
R. Gómez Vázquez, A. Otto, G. Liedl, R. Feichtenschlager:
"Simulation of Laser Welding of Dissimilar Metals";
Talk: Lasers in Manufacturing 2015,
München;
2015-06-22
- 2015-06-25; in: "Lasers in Manufacturing 2015",
(2015),
8 pages.
More information
- Source: Faculty of Mechanical and Industrial Engineering
R. Gómez Vázquez, A. Otto, G. Liedl, R. Feichtenschlager, C. Stiglbrunner:
"Simulation of laser welding aluminum-to-steel";
Keynote Lecture: 11th International Seminar "Numerical Analysis of Weldability",
Graz - Castle Seggau;
2015-09-27
- 2015-09-30; in: "Mathematical Modelling of Weld Phenomena 11",
Verlag der Technischen Universität Graz,
11
(2016),
ISBN: 978-3-85125-490-7;
99
- 108.
More information
- Source: Faculty of Mechanical and Industrial Engineering
G. Humenberger, G. Liedl, M. Ferrari, F. Bammer:
"Polarisation measurement of the emitted thermal radiation during laser material processing";
Talk: 29th DAAAM International Symposium,
Zadar;
2018-10-24
- 2018-10-27; in: "Proceedings of the 29th International DAAAM Symposium "Intelligent Manufacturing & Automation"",
B. Katalinic (ed.);
Danube Adria Association for Automation and Manufacturing, DAAAM,
Volume 29/1/Zadar
(2018),
ISSN: 1726-9679;
922
- 930.
More information
- Source: Faculty of Mechanical and Industrial Engineering
G. Humenberger, G. Liedl, S. Heidlmayr:
"Measurement of the Emitted Thermal Radiation During CO2-Laser Cutting";
Talk: MOTSP 2014,
Bol, Kroatien;
2014-06-11
- 2014-06-13; in: "MOTSP 2014 Conference Proceedings",
Croatian Association for PLM,
(2014),
ISSN: 1848-9591;
8 pages.
More information
- Source: Faculty of Mechanical and Industrial Engineering
M. Kaltenbrunner, G. Liedl, A. Kratky, R. Bielak:
"LAWD - Laser assisted wire drawing";
Talk: LANE 2004,
Erlangen;
2004-09-21
- 2004-09-24; in: "Proceedings of the 4th LANE",
Meisenbach Bamberg,
(2004),
ISBN: 3-87525-202-0;
1175
- 1181.
- Source: Faculty of Mechanical and Industrial Engineering
A. Kaplan, M. Bögl, G. Liedl, D. Schuöcker:
"TiC/Al-Metal-Matrix-Composites produced by Laser Surface Treatment";
Talk: AdvaŽnces in Automotive and Transportation Technology and Practice for the 21th Century,
Wien/Austria;
1999-06-14
- 1999-06-18; in: "ISATA - Materials for Energy Efficient Vehicules",
(1999),
305
- 312.
- Source: Faculty of Mechanical and Industrial Engineering
A. Kaplan, G. Liedl et al.:
"Analysis of laser dispersing of TiC-Powder into Aluminium alloys";
Talk: ECLAT,
Hannover;
1998-09-22
- 1999-09-23; in: "Proceedings ECLAT",
(1998),
ISBN: 3-88355-263-1;
215
- 220.
- Source: Faculty of Mechanical and Industrial Engineering
A. Kratky, G. Liedl, R. Bielak:
"LADD - Laser assisted deep drawing";
Talk: LANE 2004,
Erlangen;
2004-09-21
- 2004-09-24; in: "Proceedings of the 4th LANE",
Meisenbach Bamberg,
(2004),
ISBN: 3-87525-202-0;
1125
- 1134.
More information
- Source: Faculty of Mechanical and Industrial Engineering
A. Kratky, D. Schuöcker, G. Liedl:
"Processing with kW fibre lasers - advantages and limits";
Talk: GCL/HPL,
Lissabon (invited);
2008-09-15
- 2008-09-19; in: "Proceedings",
SPIE,
(2008),
1
- 11.
More information
- Source: Faculty of Mechanical and Industrial Engineering
M. Lackner, M. Schwarzott, G. Liedl et al.:
"Heat transfer to a single plastic resin particle - Experimental investigations by flames and laser pulses";
Poster: 3rd European Combustion Meeting ECM 2007,
Chania, Crete;
2007-04-11
- 2007-04-13; in: "Proceedings ECM2007",
(2007).
- Source: Faculty of Chemistry
M. Lackner, M. Schwarzott, G. Liedl, F. Winter:
"Heat Transfer to a Single Plastic Resin Particle - Experimental Investigations by Flames and Laser Pulses";
Talk: 3rd European Combustion Meeting (ECM),
Crete,Greece;
2007-04-11
- 2007-04-13; in: "Proc. of 3rd European Combustion Meeting (ECM)",
(2007).
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl et al.:
"Carbon dioxide laser and diode laser dispersing of TiC-Powder into aluminium substrates";
Talk: CLEO/IQEC,
Nice/France;
2000-09-10
- 2000-09-15; in: "Proceedings CLEO/IQEC",
(2000).
More information
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl et al.:
"Excimer Laser Alloying of TiC Layer with the Steel Plate, ";
Talk: Laser Material Processing,
Opatija/Croatia;
1995-06-01
- 1996-06-03; in: "Proceedings Int. Conf. on Laser Material Processing",
(1995),
953-946459-0-5;
183
- 195.
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl et al.:
"Laser Assisted Joining of Dissimilar Materials";
Talk: IQCMEA-ICF - Processing, Performance and Failure Analysis of Engineering Materials,
Luxor, Egypt;
2011-11-14
- 2011-11-17; in: "Proceedings IQCMEA-ICF - Processing, Performance and Failure Analysis of Engineering Materials",
A. El-Batahgy, M. Waly (ed.);
(2011),
22
- 31.
More information
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl, H. Koch, A. Otto:
"Fügen mit Laserstrahlung";
Talk: Fügetechnik in Österreich,
Graz (invited);
2013-04-10; in: "Fügetechnik in Österreich",
N. Enzinger (ed.);
Schweiss- und Prüftechnik,
(2013),
36
- 40.
More information
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl, A. Kratky, D. Schuöcker:
"Laser assisted shaping of metallic sheets and wires - a promising new application of high power lasers";
Talk: SPIE Conf. on High Power Laser Ablation IV-HPLA,
Taos, New Mexico/USA (invited);
2002-04-22
- 2002-04-26; in: "High Power Laser Ablation IV Vol. 4760",
4760
(2002),
ISBN: 0-8194-4524-x;
633
- 644.
More information
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl, R. Pospichal:
"FE-simulation of laser assisted joining of aluminum-steel";
Talk: High Power Laser Systems & Applications,
Istanbul, Turkey;
2012-09-10
- 2012-09-14; in: "XIX International Symposium on High-Power Laser Systems and Applications 2012",
K. Allakhverdiev (ed.);
SPIE,
8677
(2012).
More information
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl, R. Pospichal:
"Simulation of laser multi-beam interference patterns for nanostructuring of materials";
Talk: COMEC 2012,
Cayo Santa Maria, Cuba;
2012-11-05
- 2012-11-08; in: "COMEC VII Conferencia Internacional de Ingenieria Mechánica",
(2012),
ISBN: 978-959-250-757-9;
10 pages.
More information
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl, D. Schuöcker:
"Dieless wire drawing with lasers";
Talk: International Conference on Lasers, Applications, and Technologies 2007,
Minsk, Belarus;
2007-05-28
- 2007-06-01; in: "Proceedings SPIE",
SPIE,
6735
(2007),
ISSN: 0277-786x;
444
- 450.
More information
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl, D. Schuöcker et al.:
"Laser induced ignition of gasoline direct injection engines";
Talk: GCL/HPL,
Prague (invited);
2004-08-30
- 2004-09-03; in: "Proceedings SPIE",
SPIE,
5777
(2004),
ISBN: 0-8194-5760-4;
955
- 960.
More information
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl, D. Schuöcker, B. Geringer, J. Graf et al.:
"Laser induced ignition";
Talk: GCL/HPL,
Gmunden, Austria (invited);
2006-09-04
- 2006-09-08; in: "Proceedings SPIE",
SPIE,
(2006),
1
- 6.
More information
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl, D. Schuöcker, E. Kny:
"Rapid Prototyping with Lasers using Metal Powder Jets";
Talk: Proceedings of SPIE,
Moskau (invited);
2002-06-22
- 2002-06-28; in: "Laser Processing of Advanced Materials and Laser Microtechnologies",
SPIE,
5121
(2002),
ISBN: 0-8194-4981-4;
399
- 405.
More information
- Source: Faculty of Mechanical and Industrial Engineering
S. Murzin, N. Kazanskiy, G. Liedl, R. Bielak, A. Melnikov, S Osipov:
"Study of structure of dual phase steel after laser heat treatment using moving distributed surface heat sources";
Talk: 2020 International Conference on Information Technology and Nanotechnology (ITNT),
Samara;
2020-05-26
- 2020-05-29; in: "Proceedings",
IEEE (ed.);
IEEE,
(2020),
ISBN: 978-1-7281-7041-1.
More information
- Source: Faculty of Mechanical and Industrial Engineering
S. Murzin, N. Kazanskiy, G. Liedl, A. Otto, R. Bielak:
"Laser beam shaping for modification of materials with ferritic-martenistic structure";
Talk: 3rd International Conference Information Technology and Nanotechnology, ITNT,
Samara, RF;
2017-04-25
- 2017-04-27; in: "Procedia Engineering",
Elsevier,
201
(2017),
164
- 168.
More information
- Source: Faculty of Mechanical and Industrial Engineering
S. Murzin, G. Liedl, R. Pospichal, A. Melnikov:
"Study of the action of a femtosecond laser beam on samples of a Cu-Zn alloy";
Talk: The IV International Conference on Information Technology and Nanotechnology,
Samara;
2018-04-24
- 2018-04-27; in: "The IV International Conference on Information Technology and Nanotechnology",
Journal of Physics: Conference Series IOP,
1096
(2018),
Paper ID 012138,
6 pages.
More information
- Source: Faculty of Mechanical and Industrial Engineering
P. Pongratz, G. Liedl et al.:
"TEM and SIMS study of silicon implanted with phosphorus and boron";
Talk: Proc. of the Royal Microscopical Society Conference,
Bristol/UK;
1989; in: "Proc. of the Royal Microscopical Society Conference",
(1989),
513
- 518.
- Source: Faculty of Mechanical and Industrial Engineering
R. Pospichal, R. Bielak, G. Liedl:
"SCWTEX - Simultaneous Cutting and Welding of Textiles";
Talk: MOTSP 2011,
Bol, Island Brac;
2011-06-08
- 2011-06-10; in: "Proceedings of the 3rd International Scientific Conference Management of Technology Step to Sustainable Production",
(2011),
ISBN: 978-953-7738-10-5;
368
- 374.
More information
- Source: Faculty of Mechanical and Industrial Engineering
R. Pospichal, G. Liedl:
"Fabrication of Periodic Nanostructures by Multi-Beam Interference Using an Ultra-Short Pulse Laser";
Talk: MOTSP 2012,
Zadar, Kroatien;
2012-06-14
- 2012-06-16; in: "MOTSP 2012 - Proceedings of the 4th International Scientific Conference Management of Technology Step to Sustainable Production",
Croatian Association for PLM,
4
(2012),
ISSN: 1847-6880;
328
- 335.
More information
- Source: Faculty of Mechanical and Industrial Engineering
R. Pospichal, G. Liedl:
"Laser Processing Of Non-Woven Fabrics";
Talk: Management of Technology - Step to Sustainable Production: MOTSP2013,
Novi Vinodolski, Croatia;
2013-05-29
- 2013-05-31; in: "MOTSP 2013 - Conference Proceedings",
Croatian Association for PLM,
Zagreb, Croatia
(2013),
ISSN: 1848-9591;
Paper ID 169,
8 pages.
More information
- Source: Faculty of Mechanical and Industrial Engineering
R. Pospichal, G. Liedl, J. Kremser, A. Bonilla:
"Possibilities And Limitations Of Weld Seam Tracking In Laser Welding";
Talk: 7th International Scientific Conference Management of Technology - Step to Sustainable Production,
Brela, Makarska, Croatia;
2015-06-10
- 2015-06-12; in: "Conference Proceedings - 7th International Scientific Conference Management of Technology - Step to Sustainable Production",
Croatian Association for PLM,
(2015),
ISSN: 1849-7586;
Paper ID 169,
9 pages.
More information
- Source: Faculty of Mechanical and Industrial Engineering
K. Schröder, K. Schulmeister, G. Liedl:
"UV-radiation induced ozone and nitrogen oxide emission during CO2 laser welding";
Talk: Laser Safety Forum,
Copenhagen;
1995; in: "Proc. of the Int. Laser Safety Forum 95",
(1995),
305
- 311.
- Source: Faculty of Mechanical and Industrial Engineering
K. Schulmeister, C. Schmitzer, K. Duftschmid, G. Liedl et al.:
"Hazardous Ultraviolet an Blue-Light Emissions of CO2 Laser Beam Welding";
Talk: Proceedings Laser Safety,
Orlando/USA;
1997; in: "Proceedings International. Laser Safety",
(1997).
- Source: Faculty of Mechanical and Industrial Engineering
K. Schulmeister, C. Schmitzer, K. Duftschmid, G. Liedl, K. Schröder, D. Schuöcker:
"Secondary Hazards of High Power Laser Beam Welding";
Talk: Proceedings Portoroz,
Portoroz (invited);
1995; in: "Proceedings Portoroz",
(1995).
More information
- Source: Faculty of Mechanical and Industrial Engineering
D. Schuöcker, A. Kaplan, G. Liedl et al.:
"Experimental and Theoretical Studies of Laser Welding";
Talk: AdvaŽnces in Automotive and Transportation Technology and Practice for the 21th Century,
Wien/Austria;
1999-06-14
- 1999-06-18; in: "Materials for Energy-Efficient Vehicles",
(1999),
399
- 407.
- Source: Faculty of Mechanical and Industrial Engineering
D. Schuöcker, A. Kratky, F. Bammer, G. Liedl, B. Holzinger:
"Laser Assisted Forming";
Talk: ICALEO 2003 - Int. Congress on Applications of Lasers & Electro-Optics,
Jacksonville;
2003-10-13
- 2003-10-16; in: "Proceedings",
(2003).
More information
- Source: Faculty of Mechanical and Industrial Engineering
D. Schuöcker, A. Kratky, F. Bammer, G. Liedl, B. Holzinger:
"New and Forthcoming Application of High Power Lasers: LASER ASSISTED FORMING";
Talk: LTLA - Int. Conf. Laser Technology and Laser Application,
St. Petersburg (invited);
2003; in: "Laser Technology and Laser Applications",
(2003).
- Source: Faculty of Mechanical and Industrial Engineering
D. Schuöcker, G. Liedl, A. Kratky:
"Laser assisted forming - a promising new application of high power lasers";
Talk: Proceedings M4PL16,
Igls/Austria;
2003-01-22
- 2003-01-24; in: "Proc. of the 16th neeting on modelling - simulation virtuality in high power laser technology",
(2003).
- Source: Faculty of Chemistry
J. Segl, C. Edtmaier, G. Liedl, R. Pospichal:
"Preparation of the diamond-metal interface in Al-diamond MMCs";
Talk: Topical Issues of Subsoil Usage,
St. Petersburg;
2017-04-19
- 2017-04-21; in: "International Forum of Young Researchers: Topical Issues of Subsoil Usage",
St. Petersburg Mining University,
St. Petersburg
(2017),
ISBN: 978-5-94211-780-1;
173
- 175.
Vorträge und Posterpräsentationen (ohne Tagungsband-Eintrag):
- Source: Faculty of Mechanical and Industrial Engineering
C. F. Barbatti, J. Garcia, G. Liedl, H. Pinto, A. Pyzalla:
"Joining of Hardmetal to Steel by Laser Beam Welding";
Talk: 16. DGM-Symposium Verbundwerkstoffe und Werkstoffverbunde,
Bremen;
2007-03-14
- 2007-03-16.
More information
- Source: Faculty of Physics
I. Gebeshuber, C. Dorninger, G. Liedl, A. Kaspar, T. Myerscough:
"HTL Spengergasse - Quo vadis (Podiumsdiskussion)";
Talk: Festakt 260 Jahre Spengergasse,
Wirtschaftskammer Wien;
2018-01-11.
- Source: Faculty of Mechanical and Industrial Engineering
R. Gómez Vázquez, A. Otto, G. Liedl, R. Feichtenschlager, C. Stiglbrunner, S. Tatra:
"Simulation of the Dissimilar Joining Process of Aluminum and Steel by Laser Assisted Wetting";
Talk: 12th International Conference on Numerical Methods in Industrial Forming Processes NUMIFORM 2016,
University of Technology of Troyes, Troyes (France);
2016-07-04
- 2016-07-07.
More information
- Source: Faculty of Chemistry
N. Lasemi, G. Rupprechter, G. Liedl, D. Eder:
"Ultrashort laser ablation of Au-coated Ni foil and SiO2/Si targets in liquids: analysis of synthesized nanoparticles and ablation craters";
Talk: International Online Conference on Functional Materials,
Online;
2021-09-06
- 2021-09-08.
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl:
"European System of Vocational Training in Laser Technology";
Talk: 8th International Conference Technology 2003,
Bratislava (invited);
2003-09-09
- 2003-09-10.
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl:
"Laser Ignition";
Talk: Laser Seminar/Mauterndorf,
Mauterndorf/Austria (invited);
2003-03-17
- 2003-03-21.
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl:
"Laseranwendungen in Wissenschaft und Technik";
Talk: HSC-Net,
Wien/Austria (invited);
2004-05-13.
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl:
"Laserzündung von direkteinspritzenden Ottomotoren";
Talk: Anwendertreffen Laserverbund Berlin-Brandenburg,
Wien/Austria (invited);
2004-10-22.
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl:
"Laserzündung von Motoren";
Talk: Argelas Generalversammlung,
Wien (invited);
2004-03-11.
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl, R. Bielak et al.:
"Joining of Aluminum and Steel in Car Body Manufacturing";
Talk: 6th International WLT Conference on Lasers in Manufacturing,
München;
2011-05-23
- 2011-05-26.
More information
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl, J. Bruckner, N. Enzinger, J. Ivanova, M. Pudar et al.:
"Laserschweißen von Stahl und Aluminium";
Talk: Hochleistungslaser-Forum,
Gmunden (invited);
2009-12-11.
More information
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl, G. Humenberger:
"Usage of emitted thermal radiation during laser processing of materials for quality control";
Keynote Lecture: Welding and Failure Analysis of Engineering Materials - WAFA 2018,
Aswan (invited);
2018-11-19
- 2018-11-22.
More information
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl, M. Mayr, K. Whitmore:
"Laser assisted joining of aluminum-copper";
Keynote Lecture: International Conference on Photonics Research (Interphotonics 2018),
Antalya (invited);
2018-10-08
- 2018-10-12.
More information
- Source: Faculty of Mechanical and Industrial Engineering
K. Schulmeister, C. Schmitzer, K. Duftschmid, G. Liedl, K. Schröder et al.:
"Secondary optical radiation og high power laser beam welding";
Poster: Proceedings IRPA,
Wien/Austria;
1996-04-14
- 1996-04-19.
Patente:
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl, F. Nöbauer:
"Procedure for fastening a carbide tooth at a saw blade";
Patent: USA,
No. US 6310314 B2;
submitted: 2000-12-22,
granted: 2001-10-30.
More information
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl, F. Nöbauer:
"Verfahren zum Befestigen eines Hartmetallzahnes an einem Sägeblatt";
Patent: Österreich,
No. AT408080B;
submitted: 1999-12-27,
granted: 2001-01-15.
More information
Habilitationsschriften:
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl:
"Laserzündung von Verbrennungsvorgängen";
TU Wien/Fakultät für Maschinenwesen und Betriebswissenschaften,
2006.
Dissertationen (eigene und begutachtete):
- Source: Faculty of Mechanical and Industrial Engineering
G. Edinger:
"Experimentelle Untersuchungen zum tiefen Teillastbetrieb von Pumpturbinen";
Supervisor, Reviewer: C. Bauer, G. Liedl;
Institut für Energietechnik und Thermodynamik - E302,
2014;
oral examination: 2014-08-18.
- Source: Faculty of Mechanical and Industrial Engineering
M. Fischer:
"Validierungsstrategien von Laserstrahlschweißprozessen für mechanisch hochbeanspruchte Großbaugruppen in der Schienenfahrzeugindustrie";
Supervisor, Reviewer: G. Liedl, P. Kopacek;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2014;
oral examination: 2014-09-04.
- Source: Faculty of Mechanical and Industrial Engineering
J. Gumpinger:
"Austenitic steels and titanium alloys for implants manufactured by the selective laser melting process";
Supervisor, Reviewer: S. Felber, G. Schneeweiß, G. Liedl;
Institut für Hochbau und Technologie,
2013;
oral examination: 2013-04-18.
- Source: Faculty of Mechanical and Industrial Engineering
N. Lasemi:
"Pulsed laser generation of colloidal nickel, iron, and tungsten-iron-oxide alloy core-shell nanoparticles";
Supervisor, Reviewer: P. Lieberzeit, G. Liedl;
Universität Wien, Fakultät für Chemie, Institut für Physikalische Chemie,
2017;
oral examination: 2017-06-21.
- Source: Faculty of Physics
R. Ullah:
"Thresholds for Laser-Induced Thermal Injury of Ex-vivo Bovine Retina Explant";
Supervisor, Reviewer: W. Husinsky, G. Liedl;
Institut für Angewandte Physik (IAP),
2010;
oral examination: 2010-12-17.
Diplom- und Master-Arbeiten (eigene und betreute):
- Source: Faculty of Mechanical and Industrial Engineering
J. Aichinger:
"Alternative Methoden der mobilen Schneedichtemessung mittels CO2- und Diodenlaser";
Supervisor: G. Liedl;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2009;
final examination: 2009-10-14.
- Source: Faculty of Mechanical and Industrial Engineering
R Bointner:
"Verbinden von Aluminium und Stahl mittels Laserstrahlschweißen";
Supervisor: G. Liedl;
E345 Institut für spanlose Fertigung und Hochleistungslasertechnik,
2006;
final examination: 2007.
- Source: Faculty of Mechanical and Industrial Engineering
A. Donado Budino:
"Laser welding of aluminium and steel";
Supervisor: G. Liedl;
Umformtechnik und Hochleistungslasertechnik,
2008.
- Source: Faculty of Mechanical and Industrial Engineering
P. Drobniak:
"Measurement of the state of polarisation of partially linear polarised infrared radiation by means of nematic liquid crystals";
Supervisor: G. Liedl, G. Humenberger;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2016;
final examination: 2016-11-16.
More information
- Source: Faculty of Mechanical and Industrial Engineering
W. Ebner:
"Messung ausgewählter Laserparameter sowie Korrelation mit Materialbearbeitung";
Supervisor: G. Liedl;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2009.
- Source: Faculty of Mechanical and Industrial Engineering
M. Ferrari:
"Aufbau und Test eines Messsystems zur Detektion thermischer Strahlung während der Lasermaterialbearbeitung";
Supervisor: G. Liedl, G. Humenberger;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2018;
final examination: 2018-11-14.
More information
- Source: Faculty of Mechanical and Industrial Engineering
N Filep:
"Untersuchungen zur Erfassung der polarisierten Strahlung mit Hilfe eines nematischen Flüssigkristalls und einer NIR-Kamera";
Supervisor: G. Liedl, G. Humenberger;
Institut für Fertigungstechnik und Photonische Technologien,
2019;
final examination: 2019-10-23.
- Source: Faculty of Mechanical and Industrial Engineering
E. Gomez:
"Setup of a cutting fiber laser system";
Supervisor: G. Liedl, A. Kratky;
Umformtechnik und Hochleistungslasertechnik,
2008.
- Source: Faculty of Mechanical and Industrial Engineering
R. Gómez Vázquez:
"Diode Laser based Particle Removal System";
Supervisor: G. Liedl;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2009.
- Source: Faculty of Mechanical and Industrial Engineering
N. Gonzalez Vila:
"Nitrogen Laser Construction";
Supervisor: G. Liedl;
Umformtechnik und Hochleistungslasertechnik,
2008.
- Source: Faculty of Mechanical and Industrial Engineering
M. Grill:
"Aufbau einer Faserlaser-Schweißanlage und anschließende Testschweißungen von Magnesium";
Supervisor: G. Liedl;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2011;
final examination: 2011-11-30.
More information
- Source: Faculty of Mechanical and Industrial Engineering
O. Halik:
"Verbesserung des Einstechverhaltens beim Laserschneiden durch optimierte Ansteuerung einer Laserstrahlschneidanlage";
Supervisor: G. Liedl, G. Humenberger;
Institut für Fertigungstechnik und Photonische Technologien,
2021;
final examination: 2021-09-01.
- Source: Faculty of Mechanical and Industrial Engineering
S. Heidlmayr:
"Konstruktion und Aufbau einer Messvorrichtung zur Erfassung der Strahlungsemission beim CO2-Laserschneiden";
Supervisor: G. Liedl, G. Humenberger;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2013.
More information
- Source: Faculty of Mechanical and Industrial Engineering
F. Holzmüller:
"Untersuchungen zur Detektion von Schweißfehlern beim Laserstrahlschweißen von Metallen mit Hilfe einer NIR-Kamera";
Supervisor: G. Liedl, G. Humenberger;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2018;
final examination: 2018-09-26.
More information
- Source: Faculty of Mechanical and Industrial Engineering
M. Horvath:
"Der Blown-Powder-Prozess";
Supervisor: G. Liedl;
E345,
2002.
More information
- Source: Faculty of Mechanical and Industrial Engineering
G. Humenberger:
"Anwendung des Laserhobeln zur Gesenkreparatur von Druckgussformen";
Supervisor: G. Liedl;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2011;
final examination: 2011-01-26.
- Source: Faculty of Mechanical and Industrial Engineering
T. Karall:
"Einbindung einer Temperaturregelung in den Blown-Powder-Prozess ";
Supervisor: G. Liedl;
E345,
2002.
More information
- Source: Faculty of Mechanical and Industrial Engineering
A. Kratky:
"Untersuchungen von Anwendungen eines Diodenlasers am Beispiel Hartmetallschweißen";
Supervisor: G. Liedl, D. Schuöcker;
E345 IFLT,
1999;
final examination: 1999-06-30.
More information
- Source: Faculty of Mechanical and Industrial Engineering
S Marquez:
"Dual Beam Laser Welding";
Supervisor: G. Liedl;
E345 Institut für spanlose Fertigung und Hochleistungslasertechnik,
2006;
final examination: 2006.
- Source: Faculty of Mechanical and Industrial Engineering
M. Mayr:
"Laserstrahlschweißen von Stahl und Aluminium mittels eines Nd:YAG Lasers";
Supervisor: G. Liedl;
Umformtechnik und Hochleistungslasertechnik,
2008;
final examination: 2008-05-14.
More information
- Source: Faculty of Mechanical and Industrial Engineering
M. Mayr:
"Untersuchung des intermetallischen Phasenwachstums von lasergeschweißten Stahl-Aluminium Verbindungen";
Supervisor: G. Liedl;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2010;
final examination: 2010-03-30.
More information
- Source: Faculty of Mechanical and Industrial Engineering
D. Murtic:
"Modifikation von Materialien mit einer ferritisch-martensitischen Struktur durch Laserbestrahlung";
Supervisor: G. Liedl, G. Humenberger;
Institut für Fertigungstechnik und Photonische Technologien,
2019;
final examination: 2019-12-12.
More information
- Source: Faculty of Mechanical and Industrial Engineering
T. Pauger:
"Diodenbasierte Prozessüberwachung eines Remote-Schneidprozesses basierend auf einer Polarisationsmessung";
Supervisor: G. Liedl, G. Humenberger;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2014;
final examination: 2014-11-24.
- Source: Faculty of Mechanical and Industrial Engineering
G. Pérez Gómez:
"Design and Assembly of a Small Scale Solid State Laser System";
Supervisor: G. Liedl;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2009.
- Source: Faculty of Mechanical and Industrial Engineering
R. Pospichal:
"Nanostrukturierung von Metalloberflächen mittels Ultrakurzpulslaser";
Supervisor: G. Liedl;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2018;
final examination: 2018-10-24.
More information
- Source: Faculty of Mechanical and Industrial Engineering
S. Rath:
"Optische Überwachung des Laserstrahlfügens von Kunststoffen mit Metallen";
Supervisor: G. Liedl, G. Humenberger;
Institut für Fertigungstechnik und Photonische Technologien,
2019;
final examination: 2019-05-22.
More information
- Source: Faculty of Mechanical and Industrial Engineering
A Rozsnyai:
"Laser hardening of deep drawing tools for industrial usage";
Supervisor: G. Liedl;
Institut für Fertigungstechnik und Hochleistungslasertechnik),
2018;
final examination: 2018-12-12.
More information
- Source: Faculty of Electrical Engineering and Information Technology
R. Sageder:
"Optimierung einer Lasergravieranlage";
Supervisor: G. Liedl;
Institut für Spanlose Fertigung und Hochleistungslasertechnik,
1999.
- Source: Faculty of Mechanical and Industrial Engineering
A Saliger:
"Laserstrahlschweißen von Titan und Aluminium unter Anwendung eines Nd:YAG Festkörperlasers";
Supervisor: G. Liedl;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2010;
final examination: 2010-11-24.
- Source: Faculty of Mechanical and Industrial Engineering
E. Schriever:
"Setup of a diode laser system including robot calibration and integration into the safety system";
Supervisor: G. Liedl, G. Humenberger;
Institut für Fertigungstechnik und Photonische Technologien,
2019;
final examination: 2019-01-30.
More information
- Source: Faculty of Mechanical and Industrial Engineering
K Schulmeister:
"Modellierung eines Teststandes für Laserunterstütztes Drahtziehen";
Supervisor: M. Kozek, G. Liedl;
E325/E345,
2006;
final examination: 2006-11-22.
- Source: Faculty of Mechanical and Industrial Engineering
E. Silveira:
"Green compact laser sintering of hardmetals and cermets";
Supervisor: G. Liedl;
Institut für spanlose Fertigung und Hochleistungslasertechnik,
2003.
- Source: Faculty of Mechanical and Industrial Engineering
M. Straßl:
"Wärmebehandlung feinmechanischer Bauteile mit dem Laser";
Supervisor: G. Liedl;
E345 Institut für spanlose Fertigung und Hochleistungslasertechnik,
2000.
- Source: Faculty of Mechanical and Industrial Engineering
M. Tendl:
"Düsenkonzepte für den Blown Powder-Prozess ";
Supervisor: G. Liedl;
E345,
2002.
More information
- Source: Faculty of Mechanical and Industrial Engineering
O. Zhuravlov:
"Aufbau und Tests eines spektroskopischen Messsystems bei der Lasermaterialbearbeitung";
Supervisor: G. Liedl, G. Humenberger;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2017;
final examination: 2017-01-25.
More information
Wissenschaftliche Berichte:
- Source: Faculty of Mechanical and Industrial Engineering
F. Bammer, A. Kratky, G. Liedl, D. Schuöcker:
"Bericht zur Subvention für das Jahr 2007 "KOMPETENZ FASERLASER"";
Report for BMVIT;
2008;
13 pages.
More information
- Source: Faculty of Mechanical and Industrial Engineering
R. Bielak, G. Liedl:
"Modulation and Simulation of Effects during Laser Material Processing - Proposal of Simplified 2D and 3D Simulation Models";
Report for OOeLZ;
2011;
70 pages.
- Source: Faculty of Mechanical and Industrial Engineering
A. Kratky, G. Liedl, R. Bielak, B. Holzinger, G. Humenberger, W. Ebner, K. Schulmeister, D. Schuöcker, M. Kaltenbrunner:
"Tätigkeitsbericht für die Basissubvention 2005";
Report for BMVIT Bundesministerium für Verkehr, Innovation und Technologie Sekt. III/I1;
Report No. GZ. BMVIT-612.005/0001-III/I1/2005,
2006;
108 pages.
- Source: Faculty of Mechanical and Industrial Engineering
A. Kratky, G. Liedl, G. Humenberger:
"Machbarkeitsstudie eines IHU Endbeschnitts";
Report for Elb-Form;
2004.
More information
- Source: Faculty of Mechanical and Industrial Engineering
A. Kratky, G. Liedl, D. Schuöcker:
"Laserunterstütztes Tiefziehen mit einem Diodenlaser";
Report for BM-VIT;
2004.
More information
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl:
"Anhang zum Bericht Laserhärten von Blechen";
Report for voestalpine;
2008.
More information
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl:
"Laserglühen";
Report for Magna;
2004.
More information
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl:
"Laserhärten von Blechen";
Report for voest alpine AG;
2005;
46 pages.
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl:
"Laserhärten von Blechen";
Report for voestalpine AG;
2007;
84 pages.
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl:
"Laserhärten von Blechen";
Report for voestalpine;
2008;
27 pages.
More information
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl:
"Laserschneiden von Verbandsstoffen";
Report for Lohmann&Rauscher;
2003.
More information
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl:
"Laserzündung";
Report for AVL GmbH;
2002.
More information
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl:
"Studie über miniaturisierte Festkörperlaser";
Report for BM-VIT;
2004.
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl:
"Studie zum Zünden von Holzpellets mit Hilfe eines Lasers";
Report for Windhager GmbH;
2003.
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl:
"Temperaturmessung beim Laserschweißen";
Report for JOIN - Kompetenzzentrum für Fügetechnik;
2006.
More information
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl:
"Untersuchungen beim Laserschweissen von Directorblechen";
Report for Delphi Automotive GmbH;
2001.
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl:
"Zünden von Verbrennungsmotoren mittels kurzer Laserpulse";
2002.
More information
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl, R. Bielak:
"Simulation der Krafteinwirkung auf ein Bimetallband";
Report for JOIN - Kompetenzzentrum für Fügetechnik;
2006.
More information
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl, R. Bielak:
"Simulation der Krafteinwirkung auf ein Bimetallband";
Report for Projektpartner JOIN;
2007.
More information
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl, R. Bielak, F. Bammer, A. Kratky, W. Ebner, R. Gómez Vázquez:
"Abgasreinigung durch Laserstrahlung";
2009;
45 pages.
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl, D. Schuöcker:
"Marktübersicht Hochleistungdioden- und Festkörperlaser";
Report for BM-VIT;
2001;
39 pages.
- Source: Faculty of Mechanical and Industrial Engineering
G. Liedl, C. Stiglbrunner, B. Budde, W. Rhomberg, B. Wepner:
"Potenzialerhebung Lasertechnik";
2014.
- Source: Faculty of Mechanical and Industrial Engineering
T. Schumi, G. Liedl:
"Laser-Lichtspur für einspurige Fahrzeuge";
2011;
20 pages.
More information
|