Publikationsliste für
Robert Liska
E163 - Institut für Angewandte Synthesechemie
als Autorin / Autor bzw. wesentlich beteiligte Person
1235 Datensätze (2001 - 2021)
Bücher und Buch-Herausgaben
J. Stampfl, R. Liska, A. Ovsianikov (Hrg.):
"Multiphoton Lithography: Techniques, Materials and Applications";
Wiley-VCH,
Boschstraße 12, 69469 Weinheim Deutschland,
2016,
ISBN: 978-3-527-33717-0;
408 S.
Zeitschriftenartikel
A. Ajami, P. Gruber, M. Tromayer, W. Husinsky, J. Stampfl, R. Liska, A. Ovsianikov:
"Evidence of concentration dependence of the two-photon absorption cross section: Determining the ``true´´ cross section value";
Optical Materials,
47
(2015),
S. 524
- 529.
A. Ajami, W. Husinsky, A. Ovsianikov, R. Liska:
"Dispersive white light continuum single Z-scan for rapid determination of degenerate two-photon absorption spectra";
Applied Physics B - Lasers and Optics,
124 (7)
(2018),
S. 14201
- 14210.
A. Ajami, W. Husinsky, M. Tromayer, P. Gruber, R. Liska, A. Ovsianikov:
"Measurement of degenerate two-photon absorption spectra of a series of developed two-photon initiators using a dispersive white light continuum Z-scan";
Applied Physics Letters,
111
(2017),
S. 0719011
- 0719014.
A. Ajami, M. Rafique, N.U Pucher, S. Bashir, W. Husinsky, R. Liska, R. Inführ, H. Lichtenegger, J. Stampfl, S. Lüftenegger:
"Z-scan measurements of two-photon absorption for ultrashort laser radiation";
Proc. SPIE-International Society for Optical Engineering,
7027
(2008),
70271H;
S. 1
- 8.
M. Aramesh, S. Mergenthal, M. Issler, B. Plochberger, F. Weber, X. Qin, R. Liska, N. Duda, B. Huppa, J. Ries, G. Schütz, E. Klotzsch:
"Functionalized Bead Assay to Measure Three-dimensional Traction Forces during T‑cell Activation";
Nano Letters,
12
(2020),
S. 1
- 8.
M. Aramesh, S. Mergenthal, M. Issler, B. Plochberger, F. Weber, X.H. Qin, R. Liska, G. Duda, J. Huppa, J. Ries, G. Schütz, E. Klotzsch:
"Functionalized bead assay to measure 3-dimensional traction forces during T-cell activation";
Nano Letters,
21
(2021),
S. 507
- 514.
S. Baudis, D. Bomze, M. Markovic, P. Gruber, A. Ovsianikov, R. Liska:
"Modular Material System for the Microfabrication of Biocompatible Hydrogels Based on Thiol-Ene-Modified Poly(vinyl alcohol)";
Journal of Polymer Science Part A: Polymer Chemistry,
54
(2016),
13;
S. 2060
- 2070.
S. Baudis, C. Heller, R. Liska, J. Stampfl, H. Bergmeister, G. Weigel:
"(Meth)acrylate-based photoelastomers as tailored biomaterials for artificial vascular grafts";
Journal of Polymer Science Part A: Polymer Chemistry,
47
(2009),
10;
S. 2664
- 2676.
S. Baudis, S. Ligon, K. Seidler, G. Weigel, C. Grasl, H. Bergmeister, H. Schima, R. Liska:
"Hard-Block Degradable Thermoplastic Urethane-Elastomers for Electrospun Vascular Prostheses";
Journal of Polymer Science Part A: Polymer Chemistry,
50
(2012),
7;
S. 1272
- 1280.
S. Baudis, F. Nehl, S. Ligon, A. Nigisch, H. Bergmeister, D. Bernhard, J. Stampfl, R. Liska:
"Elastomeric degradable biomaterials by photopolymerization-based CAD-CAM for vascular tissue engineering";
Biomedical Materials,
6
(2011),
5.
S. Baudis, B. Steyrer, T. Pulka, H. Wilhelm, G. Weigel, H. Bergmeister, J. Stampfl, R. Liska:
"Photopolymerizable Elastomers for Vascular Tissue Regeneration";
Macromolecular Symposia,
296
(2010),
1;
S. 121
- 126.
S. Benedikt, N. Moszner, R. Liska:
"Benzoyl Phenyltelluride as Highly Reactive Visible-Light TERP-Reagent for Controlled Radical Polymerization";
Macromolecules,
47
(2014),
S. 5526
- 5531.
S. Benedikt, J. Wang, M. Markovic, N. Moszner, K. Dietliker, A. Ovsianikov, H. Grützmacher, R. Liska:
"Highly efficient water-soluble visible light photoinitiators";
Journal of Polymer Science Part A: Polymer Chemistry,
53
(2015),
24.
H. Bergmeister, S. Baudis, C. Grasl, M. Stoiber, C. Schreiber, I. Walter, R. Plasenzotti, R. Liska, H. Schima:
"In vivo evaluation of electrospun, biodegradable and non-degradable elastomeric vascular grafts";
International Journal of Artificial Organs,
34
(2011),
8;
S. 641.
H. Bergmeister, C. Grasl, M. Stoiber, C. Schreiber, N. Seyidova, I. Walter, D. Bernhard, S. Ligon, R. Liska, H. Schima:
"Healing characteristics of nanostructured, bioresorbable vascular substitutes";
Journal of Tissue Engineering and Regenerative Medicine,
6
(2012),
Supplement 1;
S. 148.
H. Bergmeister, N. Seyidova, C. Schreiber, M. Strobl, C. Grasl, I. Walter, B. Messner, S. Baudis, S. Fröhlich, M. Marchetti-Deschmann, M. Griesser, M. di Franco, M. Krssak, R. Liska, H. Schima:
"Biodegradable, thermoplastic polyurethane grafts for small diameter vascular replacements";
Acta Biomaterialia,
11
(2015),
S. 104
- 113.
H. Bergmeister, M. Strobl, R. Liska, H. Schima:
"Tissue engineering of vascular grafts";
European Surgery,
45
(2013),
S. 187
- 193.
D. Bomze, P. Knaack, T. Koch, H. Jin, R. Liska:
"Radical induced cationic frontal polymerization as a versatile tool for epoxy curing and composite production";
Journal of Polymer Science Part A: Polymer Chemistry,
54
(2016),
23;
S. 3751
- 3759.
D. Bomze, P. Knaack, R. Liska:
"Successful radical induced cationic frontal polymerization of epoxy-based monomers by C-C labile compounds";
Polymer Chemistry,
6
(2015),
S. 8161
- 8167.
L. Brigo, A. Urciuolo, S. Giulitti, D. Della Giustina, M. Tromayer, R. Liska, N. Elvassore, G. Brusatin:
"3D high-resolution two-photon crosslinked hydrogel structures for biological studies";
Acta Biomaterialia,
55
(2017),
S. 373
- 384.
Y. Catel, P. Fässler, U. Fischer, C. Gorsche, R. Liska, S. Schörpf, S. Tauscher, N. Moszner:
"Synthesis and polymerization of vinylcyclopropanes bearing urethane groups for the development of low-shrinkage composites";
European Polymer Journal,
98
(2018),
98;
S. 439
- 447.
Y. Catel, P. Fässler, U. Fischer, C. Gorsche, S. Schörpf, S. Tauscher, R. Liska, N. Moszner:
"Evaluation of Difunctional Vinylcyclopropanes as Reactive Diluents for the Development of Low-Shrinkage Composites";
Macromolecular Materials and Engineering,
302
(2017),
4;
S. 1700021
- 1700031.
K. Cicha, T. Koch, J. Torgersen, L. Zhiquan, R. Liska, J. Stampfl:
"Young´s modulus measurement of two-photon polymerized microcantilevers by using nanoindentation equipment";
Journal of Applied Physics,
112
(2012),
094906.
K. Cicha, Z. Li, K. Stadlmann, A. Ovsianikov, R. Markut-Kohl, R. Liska, J. Stampfl:
"Evaluation of 3D structures fabricated with two-photon-photopolymerization by using FTIR spectroscopy";
Journal of Applied Physics,
110
(2011),
064911;
S. 1
- 5.
C. Dall´Argine, A. Hochwallner, N. Klikovits, R. Liska, J. Stampfl, M. Sangermano:
"Hot‐Lithography SLA‐3D Printing of Epoxy Resin";
Macromolecular Materials and Engineering,
305
(2020),
9;
S. 1
- 6.
G. Della Giustina, S. Giulitti, L. Brigo, M. Zanatta, M. Tromayer, R. Liska, N. Elvassore, G. Brusatin:
"Hydrogel with Orthogonal Reactive Units: 2D and 3D Cross-Linking Modulation";
Macromolecular Rapid Communications,
38
(2017),
1;
S. 1600570.
B. Dellago, A. Ricke, T. Geyer, R. Liska, S. Baudis:
"Photopolymerizable precursors for degradable biomaterials based on acetal moieties";
European Polymer Journal,
154
(2021),
110536;
S. 1
- 12.
B. Dereka, A. Rosspeintner, L. Zhiquan, R. Liska, E. Vauthey:
"Direct Visualization of Excited-State Symmetry Breaking Using Ultrafast Time-Resolved Infrared Spectroscopy";
Journal of the American Chemical Society,
138
(2016),
13;
S. 4643
- 4649.
B. Dereka, D. Svechkarev, A. Rosspeintner, A. Aster, M. Lunzer, R. Liska, A. Mohs, E. Vauthey:
"Solvent tuning of photochemistry upon excited-state symmetry breaking";
Nature Communications,
11
(2020),
S. 1
- 11.
B. Dereka, D. Svechkarev, A. Rosspeintner, M. Tromayer, R. Liska, A. Mohs, E. Vauthey:
"Direct Observation of a Photochemical Alkyne-Allene Reaction and of a Twisted and Rehybridized Intramolecular Charge-Transfer State in a Donor-Acceptor Dyad";
Journal of the American Chemical Society,
139
(2017),
46;
S. 16885
- 16893.
C. Dworak, T. Koch, F. Varga, R. Liska:
"Photopolymerization of biocompatible Phosphorus-containing Vinyl esters and Vinyl carbamates";
Journal of Polymer Science Part A: Polymer Chemistry,
13
(2010),
48;
S. 2916
- 2924.
C. Dworak, S. Kopeinig, H. Hoffmann, R. Liska:
"Photoinitiating monomers based on di- and triacryloylated hydroxylamine derivatives";
Journal of Polymer Science Part A: Polymer Chemistry,
47
(2009),
2;
S. 392
- 403.
C. Dworak, S. Ligon, R. Tiefenthaler, J. Lagref, R. Frantz, Z. Cherkaoui, R. Liska:
"Imidazole-based ionic liquids for free radical photopolymerization";
Designed Monomers and Polymers,
18
(2015),
3;
S. 262
- 270.
C. Dworak, R. Liska:
"Alternative Initiators for Bimolecular Photoinitiating Systems";
Journal of Polymer Science Part A: Polymer Chemistry,
48
(2010),
S. 5865
- 5871.
K. Ehrmann, P. Potzmann, C. Dworak, H. Bergmeister, M. Eilenberg, C. Grasl, T. Koch, H. Schima, R. Liska, S. Baudis:
"Hard Block Degradable Polycarbonate Urethanes: Promising Biomaterials for Electrospun Vascular Prostheses";
Biomacromolecules,
21
(2020),
1;
S. 376
- 387.
M. Enayati, M. Eilenberg, C. Grasl, P. Riedl, C. Kaun, B. Messner, I. Walter, R. Liska, H. Schima, J. Wojta, B. Podesser, H. Bergmeister:
"Biocompatibility Assessment of a New Biodegradable Vascular Graft via In Vitro Co-culture Approaches and In Vivo Model";
Annals of Biomedical Engineering,
341
(2016),
44;
S. 1
- 16.
M. Enayati, S. Puchhammer, J. Iturri, C. Grasl, C. Kaun, S. Baudis, I. Walter, H. Schima, R. Liska, J. Wojta, J. Toca-Herrera, B. Podesser, H. Bergmeister:
"Assessment of a long-term in vitro model to characterize the mechanical behavior and macrophage-mediated degradation of a novel, degradable, electrospun poly-urethane vascular graft";
Journal of the Mechanical Behavior of Biomedical Materials,
112
(2020),
12;
S. 735
- 749.
P. Esfandiari, S. Ligon, J. Lagref, R. Frantz, Z. Cherkaoui, R. Liska:
"Efficient Stabilization of Thiol-ene Formulations in Radical Photopolymerization";
Journal of Polymer Science Part A: Polymer Chemistry,
51
(2013),
S. 4261
- 4266.
R. Felzmann, S. Gruber, G. Mitteramskogler, P. Tesavibul, A. Boccaccini, R. Liska, J. Stampfl:
"Lithography-based Additive Manufacturing of Cellular Ceramic Structures";
Advanced Engineering Materials,
14
(2012),
S. 1052
- 1058.
A. Franz, T. Spinell, A. Graf, H. Wutzel, R. Liska, D. Watts, A. Moritz, A. Schedle:
"Cytotoxicity of post and core composites as a function of environmental conditions";
Dental Materials,
30
(2014),
10;
S. 1179
- 1186.
S. Fröhlich, M. Eilenberg, A. Svirkova, C. Grasl, R. Liska, H. Bergmeister, M. Marchetti-Deschmann:
"Mass spectrometric imaging of in vivo protein and lipid adsorption on biodegradable vascular replacement systems";
Analyst,
140
(2015),
17;
S. 6089
- 6099.
B. Ganster, U. Fischer, N. Moszner, R. Liska:
"New Photocleavable Structures, 4a Acylgerman-Based Photoinitiator for Visible Light Curing";
Macromolecular Rapid Communications,
29
(2007),
S. 57
- 62.
B. Ganster, U. Fischer, N. Moszner, R. Liska:
"New Photocleavable Structures. V. Diacylgermane Based Photoinitiators for Visible Light Curing";
Macromolecules,
7
(2008),
41;
S. 2394
- 2400.
P. Gauss, M. Griesser, M. Markovic, A. Ovsianikov, G. Gescheidt, P. Knaack, R. Liska:
"α-Ketoesters as Nonaromatic Photoinitiators for Radical Polymerization of (Meth)acrylates";
Macromolecules,
52
(2019),
7;
S. 2814
- 2821.
P. Gauss, S. Ligon, M. Griesser, C. Gorsche, H. Svajdlenková, T. Koch, N. Moszner, R. Liska:
"The influence of vinyl activating groups on β-allyl sulfone based chain transfer agents for tough methacrylate networks";
Journal of Polymer Science Part A: Polymer Chemistry,
54
(2016),
10;
S. 1417
- 1427.
C. Gorsche, M. Griesser, G. Gescheidt, N. Moszner, R. Liska:
"β‑Allyl Sulfones as Addition−Fragmentation Chain Transfer Reagents: A Tool for Adjusting Thermal and Mechanical Properties of Dimethacrylate Networks";
Macromolecules,
47
(2014),
21;
S. 7327
- 7336.
C. Gorsche, M. Griesser, C. Hametner, B. Ganster, N. Moszner, D. Neshchadin, A. Rosspeintner, G. Gescheidt, R. Saf, R. Liska:
"New Generation of Highly Efficient, Long-Wavelength Photoinitiators for Dental Restoratives: From Research to Application";
RadTech Report,
4
(2014),
S. 12
- 18.
C. Gorsche, T. Koch, N. Moszner, R. Liska:
"Exploring the benefits of β-allyl sulfones for more homogeneous dimethacrylate photopolymer networks";
Polymer Chemistry,
6
(2015),
S. 2038
- 2047.
C. Gorsche, H. Reghunathan, S. Baudis, P. Knaack, B. Husar, J. Laeuger, H. Hoffmann, R. Liska:
"Real Time-NIR/MIR-Photorheology: A Versatile Tool for the in Situ Characterization of Photopolymerization Reactions";
Analytical Chemistry,
89
(2017),
9;
S. 4958
- 4968.
C. Gorsche, C. Schnöll, T. Koch, N. Moszner, R. Liska:
"Debonding on Demand with Highly Cross-Linked Photopolymers: A Combination of Network Regulation and Thermally Induced Gas Formation";
Macromolecules,
51
(2018),
3;
S. 660
- 669.
C. Gorsche, K. Seidler, P. Knaack, P. Dorfinger, T. Koch, J. Stampfl, N. Moszner, R. Liska:
"Rapid formation of regulated methacrylate networks yielding tough materials for lithography-based 3D printing";
Polymer Chemistry,
7
(2016),
11;
S. 2009
- 2014.
C. Gorsche, K. Seidler, H. Reghunathan, M. Kury, T. Koch, N. Moszner, R. Liska:
"Difunctional vinyl sulfonate esters for the fabrication of tough methacrylate-based photopolymer networks";
Polymer,
158
(2018),
S. 149
- 157.
M. Griesser, C. Dworak, S. Jauk, M. Höfer, A. Rosspeintner, G. Grabner, R. Liska, G. Gescheidt:
"Photoinitiators with β-Phenylogous Cleavage: An Evaluation of Reaction Mechanisms and Performance";
Macromolecules,
45
(2012),
4;
S. 1737
- 1745.
M. Griesser, D. Neshchadin, K. Dietliker, N. Moszner, R. Liska:
"Decisive Reaction Steps at Initial Stages of Photoinitiated Radical Polymerizations";
Angewandte Chemie - International Edition,
48
(2009),
S. 9359
- 9361.
M. Griesser, A. Rosspeintner, C. Dworak, M. Höfer, R. Liska, G. Gescheidt:
"Initiators Based on Benzaldoximes: Bimolecular and Covalently Bound Systems";
Macromolecules,
45
(2012),
21;
S. 8648
- 8657.
D. Grunenberg, K. Ehrmann, C. Gorsche, B. Steyrer, T. Koch, J. Stampfl, R. Liska:
"Heterotelechelic poly(propylene oxide) as migration-inhibited toughening agent in hot lithography based additive manufacturing";
Polymer Chemistry,
12
(2021),
9;
S. 1260
- 1272.
A. Gugg, C. Gorsche, N. Moszner, R. Liska:
"Frontal Polymerization: Polymerization Induced Destabilization of Peracrylates";
Macromolecular Rapid Communications,
32
(2011),
S. 1096
- 1100.
M. Heinze, C. Horn, D. Pospiech, R. Boldt, O. Kobsch, K. Eckstein, D. Jehnichen, B. Voit, S. Baudis, R. Liska, A. Naumova, K. Saalwächter, U. Lendenmann, N. Moszner:
"Polymer Networks for Enrichment of Calcium Ions";
Polymers,
13
(2021),
3506;
S. 1
- 19.
C. Heller, N.U Pucher, B. Seidl, K. Kalinyaprak-Icten, G. Ullrich, L. Kuna, V. Satzinger, V. Schmidt, H. Lichtenegger, J. Stampfl, R. Liska:
"One- and two-photon activity of cross-conjugated photoinitiators with bathochromic shift";
Journal of Polymer Science Part A: Polymer Chemistry,
45
(2007),
S. 3280
- 3291.
C. Heller, M. Schwentenwein, G. Russmüller, T. Koch, D. Moser, C. Schopper, F. Varga, J. Stampfl, R. Liska:
"Vinylcarbonates and Vinylcarbamates: Biocompatible Monomers for Radical Photopolymerization";
Journal of Polymer Science Part A: Polymer Chemistry,
49
(2011),
3;
S. 650
- 661.
C. Heller, M. Schwentenwein, G. Russmüller, F. Varga, J. Stampfl, R. Liska:
"Vinyl Esters: Low Cytotoxicity Monomers for the Fabrication of Biocompatible 3D Scaffolds by Lithography Based Additive Manufacturing";
Journal of Polymer Science Part A: Polymer Chemistry,
47
(2009),
S. 6941
- 6954.
M. Höfer, R. Liska:
"Photochemistry and Initiation Behavior of Phenylethynyl Onium Salts as Cationic Photoinitiators";
Journal of Polymer Science Part A: Polymer Chemistry,
46
(2008),
S. 6916
- 6927.
M. Höfer, N. Moszner, R. Liska:
"Oxygen scavengers and sensitizers for reduced oxygen inhibition in radical photopolymerization";
Journal of Polymer Science Part A: Polymer Chemistry,
46
(2008),
20;
S. 6916
- 6927.
A. Hofecker, P. Knaack, P. Steinbauer, M. Markovic, A. Ovsianikov, R. Liska:
"Novel synthesis routes for the preparation of low toxic vinyl ester and vinyl carbonate monomers";
Synthetic Communications,
50
(2020),
23;
S. 3629
- 3641.
B. Holzer, M. Lunzer, A. Rosspeintner, G. Licari, M. Tromayer, S. Naumov, D. Lumpi, E. Horkel, C. Hametner, A. Ovsianikov, R. Liska, E. Vauthey, J. Fröhlich:
"Towards efficient initiators for two-photon induced polymerization: fine tuning of the donor/acceptor properties";
Molecular Systems Design & Engineering,
4
(2019),
2;
S. 437
- 448.
B. Husar, C. Heller, M. Schwentenwein, A. Mautner, F. Varga, T. Koch, J. Stampfl, R. Liska:
"Biomaterials Based on Low Cytotoxic Vinyl Esters for Bone Replacement Application";
Journal of Polymer Science Part A: Polymer Chemistry,
49
(2011),
S. 4927
- 4934.
B. Husar, S. Ligon, H. Wutzel, H. Hoffmann, R. Liska:
"The formulator´s guide to anti-oxygen inhibition additives";
Progress in Organic Coatings,
77
(2014),
S. 1789
- 1798.
B. Husar, R. Liska:
"Vinyl carbonates, vinyl carbamates, and related monomers: synthesis, polymerization, and application";
Chemical Society Reviews,
41
(2012),
S. 2395
- 2405.
B. Husar, A. Mautner, C. Heller, M. Schwentenwein, F. Varga, T. Koch, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"Utilization of photopolymerization of new low toxic vinyl monomers in bone tissue engineering";
Journal of Tissue Engineering and Regenerative Medicine,
6/Supplement s1/
(2012),
S. 370.
R. Inführ, N. Pucher, C. Heller, H. Lichtenegger, R. Liska, V. Schmidt, L. Kuna, A. Haase, J. Stampfl:
"Functional polymers by two-photon 3D lithography";
Applied Surface Science,
254
(2007),
4;
S. 836
- 840.
S. Jauk, R. Liska:
"Photoinitiators with Functional Groups 9: New Derivatives of Covalently Linked Benzophenone-amine Based Photoinitiators";
Journal of Macromolecular Science Part A - Pure and Applied Chemistry,
45
(2008),
10;
S. 804
- 810.
S. Jauk, R. Liska:
"Photoinitiators with Functional Groups, 8a - Benzophenone with Covalently Bound Phenylglycine";
Macromolecular Rapid Communications,
26
(2005),
S. 1687
- 1692.
F. Karasu, D. Balta, R. Liska, N. Arsu:
"Photoinitiated polymerization of β-cyclodextrin/methyl methacrylate host/guest complex in the presence of water soluble photoinitiator, thioxanthone-catechol-O,O'-diacetic acid";
Journal of Inclusion Phenomena and Macrocyclic Chemistry,
68
(2010),
1-2;
S. 147
- 153.
F. Karasu, C. Dworak, S. Kopeinig, E. Hummer, N. Arsu, R. Liska:
"Photoinitiating Monomers Based on Diacrylamides";
Macromolecules,
41
(2008),
21;
S. 7953
- 7958.
M. Kellner, P. Radovanovic, J. Matovic, R. Liska:
"Novel cross-linkers for asymmetric poly-AMPS-based proton exchange membranes for fuel cells";
Designed Monomers and Polymers,
(2013),
S. 1
- 8.
N. Klikovits, P. Knaack, D. Bomze, I. Krossing, R. Liska:
"Novel photoacid generators for cationic photopolymerization";
Polymer Chemistry,
30
(2017),
30;
S. 4414
- 4421.
N. Klikovits, R. Liska, A. D´Anna, M. Sangermano:
"Successful UV-Induced RICFP of Epoxy-Composites";
Macromolecular Chemistry and Physics,
218
(2017),
18;
S. 1700313
- 1700316.
N. Klikovits, L. Sinawehl, P. Knaack, T. Koch, J. Stampfl, C. Gorsche, R. Liska:
"UV-Induced Cationic Ring-Opening Polymerization of 2-Oxazolines for Hot Lithograph";
ACS Macro Letters,
9
(2020),
4;
S. 546
- 551.
P. Knaack, N. Klikovits, A.D. Tran, D. Bomze, R. Liska:
"Radical induced cationic frontal polymerization in thin layers";
Journal of Polymer Science Part A: Polymer Chemistry,
57
(2019),
11;
S. 1155
- 1159.
S. Knaus, L. Spoljaric-Lukacic, R. Liska, R. Saf:
"Peroxide-initiated grafting of maleimides onto hydrocarbon substrates";
European Polymer Journal,
41
(2005),
S. 2240
- 2254.
J. Kreutzer, X.H. Qin, C. Gorsche, H. Peterlik, R. Liska, U. Schubert:
"Variation of the crosslinking density in cluster-reinforced polymers";
Materials Today Communications,
5
(2015),
S. 10
- 17.
S. Krivec, N. Matsko, V. Satzinger, N.U Pucher, N. Galler, T. Koch, V. Schmidt, W. Grogger, R. Liska, H. Lichtenegger:
"Silica-Based, Organically Modified Host Material for Waveguide Structuring by Two-Photon-Induced Photopolymerization";
Advanced Functional Materials,
20
(2010),
S. 1
- 9.
J. Kumpfmüller, K. Stadlmann, V. Satzinger, L. Zhiquan, J. Stampfl, R. Liska:
"Two-photon-induced Microfabrication of Flexible Optical Waveguides";
Journal of Laser Micro Nanoengineering,
6
(2011),
3;
S. 195
- 198.
J. Kupfmüller, Z. Li, V. Satzinger, J. Stampfl, R. Liska:
"Two-photon-induced thiol-ene polymerization as a fabrication tool for flexible optical waveguides";
Designed Monomers and Polymers,
(2013),
S. 1
- 11.
J. Kupfmüller, K. Stadlmann, Z. Li, V. Satzinger, J. Stampfl, R. Liska:
"Flexible optical interconnects via thiol-ene two-photon-induced polymerization";
MRS Online Proceedings Library,
1438 Optical Interconnects
(2013),
S. 1438.
M. Kury, K. Ehrmann, G. Harakaly, C. Gorsche, R. Liska:
"Low volatile monofunctional reactive diluents for radiation curable formulations";
Journal of Polymer Science Part A: Polymer Chemistry,
59
(2021),
19;
S. 2154
- 2169.
I. Lamparth, D. Wottawa, J. Angermann, P. Fässler, R. Liska, Y. Catel:
"Synthesis of allyl sulfones bearing urethane groups as efficient addition-fragmentation chain transfer agents for the development of low-shrinkage composites";
European Polymer Journal,
158
(2021),
S. 1
- 8.
M. Leitgeb, D. Nees, S. Ruttloff, U. Palfinger, J. Götz, R. Liska, R. Belegratis, B. Stadlober:
"Multilength Scale Patterning of Functional Layers by Roll-to-Roll Ultraviolet-Light-Assisted Nanoimprint Lithography";
ACS Nano,
10
(2016),
5;
S. 4926
- 4941.
Z. Li, A. Ajami, E. Stankevičius, W. Husinsky, G. Račiukaitis, J. Stampfl, R. Liska, A. Ovsianikov:
"3D photografting with aromatic azides: A comparison between three-photon and two-photon case";
Optical Materials,
35
(2013),
S. 1846
- 1851.
Z. Li, N.U Pucher, K. Cicha, J. Torgersen, S. Ligon, A. Ajami, W. Husinsky, A. Rosspeintner, E. Vauthey, S. Naumov, T. Scherzer, J. Stampfl, R. Liska:
"Straightforward Synthesis and Structure-Activity Relationship of Highly Efficient Initiators for Two-Photon Polymerization";
Macromolecules,
46
(2013),
2;
S. 352
- 361.
Z. Li, M. Siklos, N.U Pucher, K. Cicha, A. Ajami, W. Husinsky, A. Rosspeintner, E. Vauthey, G. Gscheidt, J. Stampfl, R. Liska:
"Synthesis and Structure-Activity Relationship of Several Aromatic Ketone-Based Two-Photon Initiators";
Journal of Polymer Science Part A: Polymer Chemistry,
49
(2011),
S. 3688
- 3699.
Z. Li, E. Stankevičius, A. Ajami, G. Račiukaitis, W. Husinsky, A. Ovsianikov, J. Stampfl, R. Liska:
"3D alkyne-azide cycloaddition: spatiotemporally controlled by combination of aryl azide photochemistry and two-photon grafting";
Chemical Communications,
49
(2013),
S. 7635
- 7637.
Z. Li, J. Torgersen, A. Ajami, S. Mühleder, X.H. Qin, W. Husinsky, W. Holnthoner, A. Ovsianikov, J. Stampfl, R. Liska:
"Initiation efficiency and cytotoxicity of novel water-soluble two-photon photoinitiators for direct 3D microfabrication of hydrogels";
RSC Advances,
36
(2013),
S. 15939
- 15946.
S. Ligon, S. Baudis, F. Nehl, H. Bergmeister, A. Nigisch, J. Stampfl, R. Liska, B. Husar:
"Improved elastomeric materials for CAD/CAM generation of vascular structures in soft tissue replacement therapies";
Journal of Tissue Engineering and Regenerative Medicine,
6
(2012),
Supplement 1;
S. 301.
S. Ligon, B. Husar, H. Wutzel, R. Holman, R. Liska:
"Strategies to Reduce Oxygen Inhibition in Photoinduced Polymerization";
Chemical Reviews,
114
(2014),
1;
S. 557
- 589.
S. Ligon, R. Liska, J. Stampfl, M. Gurr, R. Mulhaupt:
"Polymers for 3D Printing and Customized Additive Manufacturing";
Chemical Reviews,
117
(2017),
15;
S. 10212
- 10290.
S. Ligon, M. Schwentenwein, C. Gorsche, J. Stampfl, R. Liska:
"Toughening of photo-curable polymer networks: a review";
Polymer Chemistry,
7
(2016),
S. 257
- 286.
S. Ligon, K. Seidler, C. Gorsche, M. Griesser, N. Moszner, R. Liska:
"Allyl sulfides and α-substituted acrylates as addition-fragmentation chain transfer agents for methacrylate polymer networks";
Journal of Polymer Science Part A: Polymer Chemistry,
53
(2016),
3;
S. 394
- 406.
R. Liska:
"Book Review: "Industrial Photoinitiators: A Technical Guide"";
ChemPhysChem (eingeladen),
6
(2011),
S. 1389.
R. Liska:
"New photocleavable structures I: Synthesis of hydroxyalkylphenone analogues electron-rich heterocycles";
Heterocycles,
55
(2001),
S. 1475
- 1486.
R. Liska:
"Photoinitiators with Functional Groups. VI. Chemically Bound Sensitizers";
Journal of Polymer Science Part A: Polymer Chemistry,
42
(2004),
S. 2285
- 2301.
R. Liska:
"Photoinitiators with functional groups: V. New water-soluble photoinitiators containing carbohydrate residues and copolymerizable derivates thereof";
Journal of Polymer Science Part A: Polymer Chemistry,
40
(2002),
S. 1504
- 1518.
R. Liska, D. Herzog:
"New Photocleavable Structures: II. alpha-Cleavable Photoinitiators Based on Pyridines";
Journal of Polymer Science Part A: Polymer Chemistry,
42
(2004),
S. 752
- 764.
R. Liska, M. Schuster, R. Inführ, C. Turecek, C. Fritscher, B. Seidl, V. Schmidt, L. Kuna, A. Haase, F. Varga, H. Lichtenegger, J. Stampfl:
"Photopolymers for rapid prototyping";
Journal of Coating Technology and Research,
4
(2007),
4;
S. 505
- 510.
R. Liska, F. Schwager, R. Cano Vives, C. Maier, J. Stampfl:
"Water-soluble photopolymers for rapid prototyping of cellular materials";
Journal of Applied Polymer Science,
97
(2005),
S. 2286
- 2298.
R. Liska, F. Schwager, R. Cano Vives, J. Stampfl:
"New photopolymers for rapid prototyping of cellular structures";
Polymer Preprints,
45
(2004),
S. 77
- 78.
R. Liska, B. Seidl:
"1,5-diphenyl-1,4-diyn-3-one, a new and highly efficient photoinitiator";
Polymer Preprints,
45
(2004),
S. 31
- 32.
R. Liska, B. Seidl:
"1,5-Diphenyl-1,4-diyn-3-one: A Highly Efficient Photoinitiator";
Journal of Polymer Science Part A: Polymer Chemistry,
43
(2005),
S. 101
- 111.
R. Liska, B. Seidl, G. Grabner:
"Laser flash photolysis investigations of pyridine ketones";
Polymer Preprints,
45
(2004),
S. 75
- 76.
R. Liska, G. Ullrich, D. Herzog, P. Burtscher, N. Moszner:
"Activated camphorquinones as photoinitiators";
Polymer Preprints,
45
(2004),
S. 69
- 70.
M. Lunzer, L. Shi, O.G. Andriotis, P. Gruber, M. Markovic, P.J. Thurner, D. Ossipov, R. Liska, A. Ovsianikov:
"A Modular Approach to Sensitized Two-Photon Patterning of Photodegradable Hydrogels";
Angewandte Chemie,
130
(2018),
46;
S. 15342
- 15347.
M. Lunzer, L. Shi, O.G. Andriotis, P. Gruber, M. Markovic, P.J. Thurner, D. Ossipov, R. Liska, A. Ovsianikov:
"A Modular Approach to Sensitized Two-Photon Patterning of Photodegradable Hydrogels";
Angewandte Chemie International Edition,
57
(2018),
46;
S. 15122
- 15127.
D. Mandt, P. Gruber, M. Markovic, M. Tromayer, M. Rothbauer, S. Kratz, S. Ali, J. Van Hoorick, W. Halnthoner, S Mühleder, P. Dubruel, S. van Vlierberghe, P. Ertl, R. Liska, A. Ovsianikov:
"Fabrication of placental barrier structures within a microfluidic device utilizing two-photon polymerization";
International Journal of Bioprinting,
4
(2018),
S. 1
- 12.
M. Markovic, J. Van Hoorick, K. Hölzl, M. Tromayer, P. Gruber, S. Nürnberger, P. Dubruel, S. Van Vlierberghe, R. Liska, A. Ovsianikov:
"Hybrid Tissue Engineering Scaffolds by Combination of Three-Dimensional Printing and Cell Photoencapsulation";
J. Nanotechnol. Eng. Med,
6
(2015),
2;
S. 021001
- 021008.
A. Mautner, X.H. Qin, B. Kapeller, G. Russmüller, T. Koch, J. Stampfl, R. Liska:
"Efficient Curing of Vinyl Carbonates by Thiol-Ene Polymerization";
Macromolecular Rapid Communications,
33
(2012),
23;
S. 2046
- 2052.
A. Mautner, X.H. Qin, H. Wutzel, B. Kapeller, D. Moser, G. Russmüller, J. Stampfl, R. Liska:
"Thiol-Ene Photopolymerization for Efficient Curing of Vinyl Esters";
Journal of Polymer Science Part A: Polymer Chemistry,
51
(2012),
1;
S. 203
- 212.
A. Mautner, B. Steinbauer, S. Orman, G. Russmüller, K. Macfelda, T. Koch, J. Stampfl, R. Liska:
"Tough photopolymers based on vinyl esters for biomedical applications";
Journal of Polymer Science Part A: Polymer Chemistry,
54
(2016),
13;
S. 1987
- 1997.
A. Mautner, B. Steinbauer, G. Russmüller, R. Lieber, T. Koch, J. Stampfl, R. Liska:
"Vinyl carbonate photopolymers with improved mechanical properties for biomedical applications";
Designed Monomers and Polymers,
19
(2016),
5;
S. 437
- 444.
Y. Mete, P. Knaack, R. Liska:
"A systematic study of temperature-dependent cationic photopolymerization of cyclic esters";
Polymer International,
71
(2021),
2;
7 S.
G. Mikl, R. Obmann, S. Schörpf, R. Liska, T. Konegger:
"Pore Morphology Tailoring in Polymer-derived Ceramics generated through Photopolymerization-assisted Solidification Templating";
Advanced Engineering Materials,
21
(2019),
6.
M. Mitterbauer, M. Haas, H. Stüger, N. Moszner, R. Liska:
"Tetrakis(2,4,6-Trimethylbenzoyl)Silane-A Novel Photoinitiator for Visible Light Curing";
Macromolecular Materials and Engineering,
302
(2017),
5;
S. 1600536
- 1600542.
M. Mitterbauer, P. Knaack, S. Naumov, M. Markovic, A. Ovsianikov, N. Moszner, R. Liska:
"Acylstannane: Spaltbare und hochreaktive Photoinitiatoren für radikalische Photopolymerisationen bei Wellenlängen über 500 nm mit exzellentem Photobleaching";
Angewandte Chemie,
130
(2018),
37;
S. 12323
- 12327.
M. Mitterbauer, P. Knaack, S. Naumov, M. Markovic, A. Ovsianikov, N. Moszner, R. Liska:
"Acylstannanes: Cleavable and Highly Reactive Photoinitiators for Radical Photopolymerization at Wavelengths above 500 nm with Excellent Photobleaching Behavior";
Angewandte Chemie - International Edition,
57
(2018),
37;
S. 12146
- 12150.
N. Moszner, U. Fischer, B. Ganster, R. Liska, V. Rheinberger:
"Benzoyl germanium derivatives as novel visible light photoinitiators for dental materials";
Dental Materials,
7
(2008),
24;
S. 901
- 907.
N. Moszner, I. Lamparth, J. Angermann, U. Fischer, F. Zeuner, T. Bock, R. Liska, V. Rheinberger:
"Synthesis of bis(3-{[2-(allyloxy)ethoxy]methyl}-2,4,6-trimethylbenzoyl)(phenyl)phosphine oxide - a tailor-made photoinitiator for dental adhesives";
Beilstein Journal of Organic Chemistry,
26
(2010),
6;
S. 1
- 9.
D. Neshchadin, A. Rosspeintner, M. Griesser, B. Lang, S. Mosquera-Vazquez, E. Vauthey, V. Gorelik, R. Liska, C. Hametner, B. Ganster, R. Saf, N. Moszner, G. Gescheidt:
"Acylgermanes: Photoinitiators and Sources for Ge-Centered Radicals. Insights into their Reactivity";
Journal of the American Chemical Society,
135
(2013),
46;
S. 17314
- 17321.
R. Obmann, S. Schörpf, C. Gorsche, R. Liska, T. Fey, T. Konegger:
"Porous polysilazane-derived ceramic structures generated through photopolymerization-assisted solidification templating";
Journal of the European Ceramic Society,
39
(2019),
4;
S. 838
- 845.
A. Oesterreicher, C. Gorsche, S. Ayalur-Karunakaran, A. Moser, M. Edler, G. Pinter, S. Schlögl, R. Liska, T. Griesser:
"Exploring Network Formation of Tough and Biocompatible Thiol-yne Based Photopolymers";
Macromolecular Rapid Communications,
37
(2016),
20;
S. 1701
- 1706.
S. Orman, C. Hofstetter, A. Aksu, F. Reinauer, R. Liska, S. Baudis:
"Toughness enhancers for bone scaffold materials based on biocompatible photopolymers";
Journal of Polymer Science Part A: Polymer Chemistry,
56
(2018),
24;
S. 110
- 119.
A. Ovsianikov, Z. Li, A. Ajami, J. Torgersen, W. Husinsky, J. Stampfl, R. Liska:
"3D grafting via three-photon induced photolysis of aromatic azides";
Applied Physics A: Materials Science & Processing,
108
(2012),
1;
S. 29
- 34.
A. Ovsianikov, Z. Li, J. Torgersen, J. Stampfl, R. Liska:
"Selective Functionalization of 3D Matrices Via Multiphoton Grafting and Subsequent Click Chemsitry";
Advanced Functional Materials,
22
(2012),
16;
S. 3429
- 3433.
A. Ovsianikov, V. Mironov, J. Stampfl, R. Liska:
"Engineering 3D cell-culture matrices: multiphoton processing technologies for biological and tissue engineering applications";
Expert Review of Medical Devices (eingeladen),
9
(2012),
6;
S. 613
- 633.
A. Ovsianikov, S Mühleder, J. Torgersen, X.H. Qin, L. Zhiquan, S. Van Vlierberghe, P. Dubruel, W Holnthoner, H. Redl, R. Liska, J. Stampfl:
"Laser Photofabrication of Cell-Containing Hydrogel Constructs";
Langmuir,
30
(2014),
13;
7 S.
G. Peer, P. Dorfinger, T. Koch, J. Stampfl, C. Gorsche, R. Liska:
"Photopolymerization of Cyclopolymerizable Monomers and Their Application in Hot Lithography";
Macromolecules,
51
(2018),
22;
S. 9344
- 9353.
G. Peer, A. Eibel, C. Gorsche, Y. Catel, G. Gescheidt, N. Moszner, R. Liska:
"Ester-Activated Vinyl Ethers as Chain Transfer Agents in Radical Photopolymerization of Methacrylates";
Macromolecules,
52
(2019),
7;
S. 2691
- 2700.
G. Peer, M. Kury, C. Gorsche, Y. Catel, P. Frühwirt, G. Gescheidt, N. Moszner, R. Liska:
"Revival of Cyclopolymerizable Monomers as Low-Shrinkage Cross-Linkers";
Macromolecules,
53
(2020),
19;
S. 8374
- 8381.
P. Petrochenko, J. Torgersen, P. Gruber, L. Hicks, J. Zheng, G. Kumar, R. Narayan, P. Goering, R. Liska, J. Stampfl, A. Ovsianikov:
"Laser 3D Printing with Sub‐Microscale Resolution of Porous Elastomeric Scaffolds for Supporting Human Bone Stem Cells";
Advanced Healthcare Materials,
#
(2014),
#;
S. #.
P. Potzmann, F. Lopez Villanueva, R. Liska:
"UV-Initiated Bubble-Free Frontal Polymerization in Aqueous Conditions";
Macromolecules,
48
(2015),
24;
S. 8738
- 8745.
E. Prina, M. Amer, L. Sidney, M. Tromayer, J. Moore, R. Liska, M. Bertolin, S. Ferrari, A. Hopkinson, H. Dua, J. Yang, R. Wildman, F. Rose:
"Bioinspired Precision Engineering of Three‐Dimensional Epithelial Stem Cell Microniches";
Advanced Biosystems,
4
(2020),
5;
S. 16
- 22.
N.U Pucher, A. Rosspeintner, V. Satzinger, V. Schmidt, G. Gescheidt, J. Stampfl, R. Liska:
"Structure-Activity Relationship in D-π-A-π-D-Based Photoinitiators for the Two-Photon-Induced Photopolymerization Process";
Macromolecules,
42
(2009),
S. 6519
- 6528.
N.U Pucher, M. Siklos, A. Rosspeintner, A. Ajami, K. Cicha, G. Gscheidt, W. Husinsky, J. Stampfl, R. Liska:
"Optimization of feature resolution, processing window & structuring time for the two-photon polymerization (2PP) process by the use of novel initiators";
Proc. of LPM2010 - the 11th International Symposium on Laser Precision Microfabrication,
-
(2010),
S. 1
- 6.
X.H. Qin, P. Gruber, M. Markovic, B. Plochberger, E. Klotzsch, J. Stampfl, A. Ovsianikov, R. Liska:
"Enzymatic synthesis of hyaluronic acid vinyl esters for two-photon microfabrication of biocompatible and biodegradable hydrogel constructs";
Polymer Chemistry,
5
(2014),
22;
S. 6523
- 6533.
X.H. Qin, K. Labuda, J. Chen, V. Hruschka, A. Khadem, R. Liska, H. Redl, P. Slezak:
"Development of Synthetic Platelet-Activating Hydrogel Matrices to Induce Local Hemostasis";
Advanced Functional Materials,
25
(2015),
S. 6606
- 6617.
X.H. Qin, A. Ovsianikov, J. Stampfl, R. Liska:
"Additive manufacturing of photosensitive hydrogels for tissue engineering applications";
BioNanoMaterials,
15
(2014),
3-4;
S. 49
- 70.
X.H. Qin, J. Torgersen, R. Saf, S. Mühleder, N.U Pucher, S. Ligon, W. Holnthoner, H. Redl, A. Ovsianikov, J. Stampfl, R. Liska:
"Three-Dimensional Microfabrication of Protein Hydrogels via Two-Photon-Excited Thiol-Vinyl Ester Photopolymerization";
Journal of Polymer Science Part A: Polymer Chemistry,
51
(2013),
S. 4799
- 4810.
W. Qiu, P. Hu, J. Zhu, R. Liu, L. Zhiquan, Z. Hu, Q. Chen, K. Dietliker, R. Liska:
"Cleavable Unimolecular Photoinitiators Based on Oxime‐Ester Chemistry for Two‐Photon Three‐Dimensional Printing";
ChemPhotoChem,
3
(2019),
S. 1
- 6.
J. Radebner, A. Eibel, M. Leypold, C. Gorsche, L. Schuh, R. Fischer, A. Torvisco, D. Neshchadin, R. Geier, N. Moszner, R. Liska, G. Gescheidt, M. Haas, H. Stüger:
"Tetraacylgermanes: Highly Efficient Photoinitiators for Visible-Light-Induced Free-Radical Polymerization";
Angewandte Chemie - International Edition,
56
(2017),
11;
S. 3103
- 3107.
P. Radovanovic, M. Kellner, J. Matovic, R. Liska, T. Koch:
"Asymmetric membranes with interpenetrating proton-conducting morphology made by a combination of immersion precipitation and photopolymerization";
Journal of Membrane Science,
401-402
(2012),
S. 254
- 261.
A. Rosspeintner, M. Griesser, N.U Pucher, K. Iskra, R. Liska, G. Gescheidt:
"Toward the Photoinduced Reactivity of 1,5-Diphenylpenta-1,4-diyn-3-one (DPD): Real-Time Investigations by Magnetic Resonance";
Macromolecules,
42
(2009),
S. 8034
- 8038.
S. Rothemund, T. Aigner, I. Iturmendi, M. Rigau, B. Husar, F. Hildner, E. Oberbauer, M. Prambauer, G. Olawale, R. Forstner, R. Liska, K. Schröder, O. Brüggemann, I. Teasdale:
"Degradable Glycine-Based Photo- Polymerizable Polyphosphazenes for Use as Scaffolds for Tissue Regeneration";
Macromolecular Bioscience,
(2014),
S. 1
- 13.
L. Ruppitsch, G. Peer, K. Ehrmann, T. Koch, R. Liska:
"Photopolymerization of difunctional cyclopolymerizable monomers with low shrinkage behavior";
Journal of Polymer Science Part A: Polymer Chemistry,
59
(2021),
6;
S. 519
- 531.
G. Russmüller, R. Liska, J. Stampfl, C. Heller, A. Mautner et al.:
"3D Printable Biophotopolymers for in vivo Bone Regeneration";
Materials,
8
(2015),
S. 3685
- 3700.
M. Sandholzer, M. Schuster, R. Liska, C. Turecek, F. Varga, F. Stelzer, C. Slugovc:
"Ring opening metathesis polymers as macroinitiator-coinitiator systems for the photopolymerization of acrylates";
Polymer Preprints,
48
(2007),
S. 925
- 926.
M. Sandholzer, M. Schuster, F. Varga, R. Liska, C. Slugovc:
"ROMP based photoinitiator-coinitiator systems with improved migration sta";
Journal of Polymer Science Part A: Polymer Chemistry,
11
(2008),
46;
S. 3648
- 3661.
M. Sangermano, A. D´Anna, C. Marro, N. Klikovits, R. Liska:
"UV-activated frontal polymerization of glass fibre reinforced epoxy composites";
Composites - Part B: Engineering,
143
(2018),
S. 168
- 171.
E. Sari, M. Mitterbauer, R. Liska, Y. Yagci:
"Visible light induced free radical promoted cationic polymerization using acylsilanes";
Progress in Organic Coatings,
132
(2019),
S. 139
- 143.
S. Schörpf, Y. Catel, N. Moszner, C. Gorsche, R. Liska:
"Enhanced reduction of polymerization-induced shrinkage stress via combination of radical ring opening and addition fragmentation chain transfer";
Polymer Chemistry,
10
(2019),
S. 1357
- 1366.
C. Schreiber, S. Baudis, C. Grasl, M. Stoiber, I. Walter, R. Plasenzotti, D. Bernhard, R. Liska, H. Schima, H. Bergmeister:
"In-vivo evaluation of biodegradable and non-degradable elastomeric vascular grafts";
European Surgery,
43
(2011),
Supplement 243/11;
S. 23.
C. Schreiber, N. Seyidova, S. Baudis, C. Grasl, M. Stoiber, R. Liska, H. Schima, H. Bergmeister:
"Long-term performance of small diameter vessel grafts";
European Surgery,
44
(2012),
Supplement 244/12;
S. 7.
C. Schreiber, N. Seyidova, S. Baudis, C. Grasl, I. Walter, D. Bernhard, R. Liska, H. Schima, H. Bergmeister:
"Long term evaluation of a new synthetic degradable small diameter vascular graft";
European Surgery,
44
(2012),
Supplement 245/12;
S. 16.
M. Schuster, R. Inführ, C. Turecek, J. Stampfl, A. Varga, R. Liska:
"Photopolymers for Rapid Prototyping of Soluble Mold Materials and Molding of Cellular Biomaterials";
Monatshefte für Chemie,
137
(2006),
S. 843
- 853.
M. Schuster, C. Turecek, B. Kaiser, J. Stampfl, R. Liska, F. Varga:
"Evaluation of Biocompatible Photopolymers I: Photoreactivity and Mechanical Properties of Reactive Diluents";
Journal of Macromolecular Science Part A - Pure and Applied Chemistry,
44
(2007),
5;
S. 547
- 557.
M. Schuster, C. Turecek, A. Mateos, J. Stampfl, R. Liska, F. Varga:
"Evaluation of Biocompatible Photopolymers II: Further Reactive Diluents";
Monatshefte für Chemie,
138
(2007),
4;
S. 261
- 268.
M. Schuster, C. Turecek, F. Varga, H. Lichtenegger, J. Stampfl, R. Liska:
"3D-shaping of biodegradable photopolymers for hard tissue replacement";
Applied Surface Science,
254
(2007),
S. 1131
- 1134.
M. Schuster, C. Turecek, G. Weigel, R. Saf, J. Stampfl, F. Varga, R. Liska:
"Gelatin-Based Photopolymers for Bone Replacement Materials";
Journal of Polymer Science Part A: Polymer Chemistry,
47
(2009),
S. 7078
- 7089.
B. Seidl, K. Kalinyaprak-Icten, N. Fuß, M. Höfer, R. Liska:
"Photoinitiators with Double and Triple Bonds";
Journal of Polymer Science Part A: Polymer Chemistry,
46
(2008),
S. 289
- 301.
B. Seidl, R. Liska:
"Mechanistic investigations on a diynone type photoinitiator";
Macromolecular Chemistry and Physics,
208
(2007),
1;
S. 44
- 54.
B. Seidl, R. Liska, G. Grabner:
"New photocleavable structures III. Photochemistry and photophysics of pyridinol and benzoyl-based photoinitiators";
Journal of Photochemistry and Photobiology A - Chemistry,
180
(2006),
S. 109
- 117.
K. Seidler, K. Ehrmann, P. Steinbauer, A. Rohatschek, O.G. Andriotis, C. Dworak, T. Koch, H. Bergmeister, C. Grasl, H. Schima, P.J. Thurner, R. Liska, S. Baudis:
"A structural reconsideration: Linear aliphatic or alicyclic hard segments for biodegradable thermoplastic polyurethanes?";
Journal of Polymer Science Part A: Polymer Chemistry,
56
(2018),
19;
S. 2214
- 2224.
K. Seidler, M. Griesser, M. Kury, H. Reghunathan, P. Dorfinger, T. Koch, A. Svirkova, M. Marchetti-Deschmann, J. Stampfl, N. Moszner, C. Gorsche, R. Liska:
"Vinyl Sulfonate Esters: Efficient Chain Transfer Agents for the 3D Printing of Tough Photopolymers without Retardation";
Angewandte Chemie - International Edition,
57
(2018),
29;
S. 9165
- 9169.
J. Stampfl, S. Baudis, C. Heller, R. Liska, A. Neumeister, R. Kling, A. Ostendorf, M. Spitzbart:
"Photopolymers with tunable mechanical properties processed by laser based high-resolution stereolithography";
Journal of Micromechanics and Microengineering,
18
(2008),
125014.
J. Stampfl, H. Fouad, S. Seidler, R. Liska, F. Schwager, A. Woesz, P. Fratzl:
"Fabrication and moulding of cellular materials by rapid prototyping";
International Journal of Materials and Product Technology,
21
(2004),
4;
S. 285
- 296.
J. Stampfl, R. Liska:
"New materials for rapid prototyping applications";
Macromolecular Chemistry and Physics,
206
(2005),
S. 1253
- 1256.
J. Stampfl, A. Wöß, S. Seidler, H. Fouad, A. Pisaipan, F. Schwager, R. Liska:
"Water Soluble, Photocurable Resins for Rapid Prototyping Applications";
Macromolecular Symposia,
217
(2004),
1;
S. 99
- 107.
P. Steinbauer, R. Liska, S. Baudis:
"Approaching new biomaterials: copolymerization characteristics of vinyl esters with norbornenes, allyl esters and allyl ethers";
Polymer International,
71
(2021),
2;
7 S.
P. Steinbauer, A. Rohatschek, O.G. Andriotis, N. Bouropoulos, R. Liska, P.J. Thurner, S. Baudis:
"Biomimetic adhesion motifs based on RAFT polymers with phosphonate groups";
European Polymer Journal,
143
(2020),
110188;
S. 1
- 12.
P. Steinbauer, A. Rohatschek, O.G. Andriotis, N. Bouropoulos, R. Liska, P.J. Thurner, S. Baudis:
"Single-Molecule Force Spectroscopy Reveals Adhesion-by-Demand in Statherin at the Protein-Hydroxyapatite Interface";
Langmuir,
36
(2020),
44;
S. 13292
- 13300.
B. Steyrer, B. Busetti, G. Harakaly, R. Liska, J. Stampfl:
"Hot Lithography vs. room temperature DLP 3D-printing of a dimethacrylate";
Additive Manufacturing,
21
(2018),
S. 209
- 214.
B. Steyrer, P. Neubauer, R. Liska, J. Stampfl:
"Visible Light Photoinitiator for 3D-Printing of Tough Methacrylate Resins";
Materials,
10
(2017),
12;
11 S.
D. Sticker, M. Rothbauer, J. Ehgartner, C. Steininger, O. Liske, R. Liska, W. Neuhaus, T. Mayr, T. Haraldsson, J. Kutter, P. Ertl:
"Oxygen Management at the Microscale: A Functional Biochip Material with Long-Lasting and Tunable Oxygen Scavenging Properties for Cell Culture Applications";
ACS Applied Materials & Interfaces,
11
(2019),
10;
S. 9730
- 9739.
P. Sulek, S. Knaus, R. Liska:
"Grafting of Functional Maleimides onto Oligo- and Polyolefines";
Macromolecular Symposia,
176
(2001),
S. 155
- 165.
M. Susec, S. Ligon, J. Stampfl, R. Liska, P. Krajnc:
"Hierarchically Porous Materials from Layer-by-Layer Photopolymerization of High Internal Phase Emulsions";
Macromolecular Rapid Communications,
34
(2013),
S. 938
- 943.
M. Susec, R. Liska, G. Russmüller, J. Kotek, P. Krajnc:
"Microcellular Open Porous Monoliths for Cell Growth by Thiol-Ene Polymerization of Low-Toxicity Monomers in High Internal Phase Emulsions";
Macromolecular Bioscience,
(2014),
S. 1
- 9.
R. Taschner, P. Gauss, P. Knaack, R. Liska:
"Biocompatible photoinitiators based on poly‐α‐ketoesters";
Journal of Polymer Science Part A: Polymer Chemistry,
58
(2020),
2;
S. 242
- 253.
R. Taschner, P. Knaack, R. Liska:
"Bismuthonium- and pyrylium-based radical induced cationic frontal polymerization of epoxides";
Journal of Polymer Science Part A: Polymer Chemistry,
59
(2021),
16;
S. 1841
- 1854.
R. Taschner, R. Liska, P. Knaack:
"Evaluation of suitable onium tetrafluoroborates for cationic polymerization of epoxides";
Polymer International,
71
(2021),
1;
13 S.
S. Tauscher, Y. Catel, R. Liska, N. Moszner:
"New Radiopaque Bromine-Containing Monomers for Dental Restorative Materials";
Macromolecular Materials and Engineering,
301
(2016),
6;
S. 733
- 742.
P. Tesavibul, R. Felzmann, S. Gruber, R. Liska, I. Thompson, A. Boccaccini, J. Stampfl:
"Processing of 45S5 Bioglass by lithography-based additive manufacturing";
Materials Letters,
74
(2012),
S. 81
- 84.
S. Theis, I. Iturmendi, C. Gorsche, M. Orthofer, M. Lunzer, S. Baudis, A. Ovsianikov, R. Liska, U. Monkowius, I. Teasdale:
"Durch sichtbares Licht und Nahinfrarotstrahlung abbaubare supramolekulare Metallo-Gele";
Angewandte Chemie,
129
(2017),
50;
S. 16071
- 16075.
S. Theis, I. Iturmendi, C. Gorsche, M. Orthofer, M. Lunzer, S. Baudis, A. Ovsianikov, R. Liska, U. Monkowius, I. Teasdale:
"Metallo-Supramolecular Photocleavable Gels Sensitive to Visible and Near Infrared Irradiation";
Angewandte Chemie International Edition,
56
(2017),
50;
S. 15857
- 15860.
J. Torgersen, A. Ovsianikov, V. Mironov, N.U Pucher, X.H. Qin, Z. Li, K. Cicha, T. Machacek, V. Jantsch-Plunger, R. Liska, J. Stampfl:
"Photo-sensitive hydrogels for threedimensional laser microfabrication in the presence of whole organisms";
Journal of Biomedical Optics,
17
(2012),
10;
S. 1
- 10.
J. Torgersen, X.H. Qin, Z. Li, A. Ovsianikov, R. Liska, J. Stampfl:
"Hydrogels for Two-Photon Polymerization: A Toolbox for Mimicking the Extracellular Matrix";
Advanced Functional Materials,
10
(2013),
6.
A.D. Tran, T. Koch, P. Knaack, R. Liska:
"Radical induced cationic frontal polymerization for preparation of epoxy composites";
Composites Part A: Applied Science and Manufacturing,
132
(2020),
May;
S. 1
- 8.
A.D. Tran, T. Koch, R. Liska, P. Knaack:
"Radical-induced cationic frontal polymerisation for prepreg technology";
Monatshefte für Chemie,
152
(2021),
S. 151
- 165.
M. Tromayer, A. Dobos, P. Gruber, A. Ajami, R. Dedic, A. Ovsianikov, R. Liska:
"A biocompatible diazosulfonate initiator for direct encapsulation of human stem cells via two-photon polymerization";
Polymer Chemistry,
9
(2018),
22;
S. 3108
- 3117.
M. Tromayer, P. Gruber, M. Markovic, A. Rosspeintner, E. Vauthey, H. Redl, A. Ovsianikov, R. Liska:
"A biocompatible macromolecular two-photon initiator based on hyaluronan";
Polymer Chemistry,
8
(2017),
2;
S. 451
- 460.
M. Tromayer, P. Gruber, A. Rosspeintner, A. Ajami, W. Husinsky, F. Plasser, L. Gonzalez, E. Vauthey, A. Ovsianikov, R. Liska:
"Wavelength-optimized Two-Photon Polymerization Using Initiators Based on Multipolar Aminostyryl-1,3,5-triazines";
Scientific Reports,
8
(2018),
S. 1727301
- 1727311.
C. Turecek, M. Schuster, F. Varga, R. Liska, B. Kaiser, J. Stampfl, K. Klaushofer:
"Evaluation and influence of photopolymers, capable for rapid prototyping on proliferation and morphologiy of osteoblasts";
Calcified Tissue International,
78
(2006),
S. 71 P127.
M. Turnsek, P. Krajnc, R. Liska, T. Koch:
"Macroporous alumina with cellular interconnected morphology from emulsion templated polymer composite precursors";
Journal of the European Ceramic Society,
36
(2016),
S. 1045
- 1051.
G. Ullrich, P. Burtscher, U. Salz, N. Moszner, R. Liska:
"Phenylglycine Derivatives as Coinitiators for the Radical Photopolymerization of Acidic Aqueous Formulations";
Journal of Polymer Science Part A: Polymer Chemistry,
44
(2006),
S. 115
- 125.
G. Ullrich, B. Ganster, U. Salz, N. Moszner, R. Liska:
"Photoinitiators With Functional Groups. IX. Hydrophylic Bisacylphosphine Oxides for Acidic Aqueous Formulations";
Journal of Polymer Science Part A: Polymer Chemistry,
44
(2006),
S. 1686
- 1700.
G. Ullrich, D. Herzog, R. Liska, P. Burtscher, N. Moszner:
"Photoinitiators with Functional Groups. VII. Covalently Bonded Camphorquinone-Amines";
Journal of Polymer Science Part A: Polymer Chemistry,
42
(2004),
S. 4948
- 4963.
J. Van Hoorick, P. Gruber, M. Markovic, M. Tromayer, J. Van Erps, H. Thienpont, R. Liska, A. Ovsianikov, P. Dubruel, S. Van Vlierberghe:
"Cross-Linkable Gelatins with Superior Mechanical Properties Through Carboxylic Acid Modification: Increasing the Two-Photon Polymerization Potential Quick View Other Sources";
Biomacromolecules,
18
(2017),
10;
S. 3260
- 3272.
T. Verdianz, H. Simbürger, R. Liska:
"Surface modification of imide containing polymers I: Catalytic groups";
European Polymer Journal,
42
(2006),
S. 638
- 654.
T. Verdianz, H. Simbürger, R. Liska:
"Surface modification of imide containing polymers II: Co-rective groups";
European Polymer Journal,
42
(2006),
S. 869
- 882.
J. Wang, S. Stanic, A. Altun, K. Dietliker, M. Schwentenwein, L. Jin, J. Stampfl, S. Baudis, R. Liska, H. Grützmacher:
"A highly efficient waterborne photoinitiator for visible-light-induced three-dimensional printing of hydrogels";
Chemical Communications,
54
(2018),
S. 920
- 923.
R. Woods, S. Feldbacher, D. Zidar, G. Langer, V. Satzinger, V. Schmidt, N.U Pucher, R. Liska, W. Kern:
"3D optical waveguides produced by two photon photopolymerisation of a flexible silanol terminated polysiloxane containing acrylate functional groupsfunctional groups";
Optical Materials Express,
4
(2014),
3;
S. 486
- 498.
A. Zahoranova, S. Baudis, R. Liska, P. Krajnc:
"Thiol-Ene Cross-linking of Poly(ethylene glycol) within High Internal Phase Emulsions: Degradable Hydrophilic PolyHIPEs for Controlled Drug Release";
Macromolecules,
54
(2021),
S. 10370
- 10380.
E. Zerobin, M. Markovic, Z. Tomasikova, X.H. Qin, D. Ret, P. Steinbauer, J. Kitzmüller, W. Steiger, P. Gruber, A. Ovsianikov, R. Liska, S. Baudis:
"Hyaluronic acid vinyl esters: A toolbox toward controlling mechanical properties of hydrogels for 3D microfabrication";
Journal of Polymer Science Part A: Polymer Chemistry,
58
(2020),
8;
S. 1288
- 1298.
Buchbeiträge
B. Husar, M. Hatzenbichler, V. Mironov, R. Liska, J. Stampfl, A. Ovsianikov:
"Photopolymerization-based additive manufacturing for the development of 3D porous scaffolds";
in: "Biomaterials for Bone Regeneration",
herausgegeben von: P. Dubruel and S. V. Vlierberghe;
Elsevier Science Ltd.,
2014,
ISBN: 978-0-85709-804-7,
S. 149
- 201.
S. Ligon, J. Kumpfmüller, N.U Pucher, J. Stampfl, R. Liska:
"Fabrication ofWaveguides and Other Optical Elements by Multiphoton Lithography";
in: "Multiphoton Lithography",
Wiley-VCH,
Weinheim,
2016,
ISBN: 978-3-527-33717-0,
S. 267
- 296.
R. Liska:
"New chromophores for photoinitiators";
in: "Photochemistry and UV Curing: New Trends",
herausgegeben von: J.P. Fouassier;
Research Signpost,
Trivandrum - 695023, Kerala, India,
2006,
ISBN: 81-308-0014-4,
S. 55
- 67.
R. Liska, M. Schuster:
"Biocompatible Photopolymers";
in: "Basics and Applications of Photopolymerization Reactions",
J.P. Fouassier, X. Allonas (Hrg.);
Research Signpost,
Kerala, India,
2010,
ISBN: 978-81-308-0430-9,
S. 77
- 91.
R. Liska, J. Stampfl:
"Photopolymers for rapid prototyping";
in: "Basics and Applications of Photopolymerization Reactions",
J.P. Fouassier, X. Allonas (Hrg.);
Research Signpost,
Kerala, India,
2010,
ISBN: 978-81-308-0430-9,
S. 147
- 173.
N. Moszner, R. Liska:
"Photoinitiators for direct adhesive restorative materials";
in: "Basics and Applications of Photopolymerization Reactions",
J.P. Fouassier, X. Allonas (Hrg.);
Research Signpost,
Kerala, India,
2010,
ISBN: 978-81-308-0430-9,
S. 91
- 112.
J. Stampfl, R. Liska:
"Polymerizable Hydrogels for Rapid Prototyping: Chemistry, Photolithography, and Mechanical Properties";
in: "Stereolithography",
P. Bartolo (Hrg.);
Springer-Verlag,
New York,
2011,
ISBN: 978-0-387-92903-3,
S. 161
- 182.
J. Stampfl, H. E. Pettermann, R. Liska:
"Bioinspired Cellular Structures: Additive Manufacturing and Mechanical Properties";
in: "Biomimetics - Materials, Structures and Processes",
P. Gruber, D. Bruckner, Ch. Hellmich, H. Schmiedmayer, H. Stachelberger, I. Gebeshuber (Hrg.);
Springer-Verlag,
Berlin,
2011,
ISBN: 978-3642119330,
S. 105
- 123.
L. Tytgat, S. Baudis, H. Ottevaere, R. Liska, H. Thienpont, P. Dubruel, S. Vlierberghe:
"Photopolymerizable Materials for Cell Encapsulation";
in: "3D Printing and Biofabrication",
Springer Nature Switzerland AG. Part of Springer Nature,
Switzerland,
2018,
ISBN: 978-3-319-45443-6,
S. 353
- 396.
Beiträge in Tagungsbänden
R. Inführ, R. Liska, H. Lichtenegger, Ch. Fritscher, J. Stampfl, N. Hüsing:
"3D Lithography of Organo-Soluble Mold Materials for Sol-Gel Nanocomposites";
in: "RadTech Europe 2005 Conference Proceedings Volume II",
Rad Tech Europe Association,
2005,
ISBN: 3-87870-330-9,
S. 487
- 494.
S. Kopeinig, R. Liska:
"Further Covalently Bonded Photoinitiators";
in: "RadTech Europe 2005 Conference Proceedings Volume II",
Rad Tech Europe Association,
2005,
ISBN: 3-87870-330-9,
S. 373
- 381.
R. Liska, M. Schuster, B. Seidl, R. Inführ, C. Fritscher, J. Stampfl, H. Lichtenegger, C. Turecek, F. Varga, V. Schmidt, L. Kuna, A. Haase:
"New Photopolymers for Rapid Prototyping";
in: "Radcure Coatings and Inks: Cost & Performance",
PRA Coatings Technology Centre,
Hamton, Middlesex, UK,
2006,
ISBN: 0-9551317-3-1,
S. 1
- 8.
N.U Pucher, V. Satzinger, A. Rosspeintner, C. Heller, G. Gescheidt, V. Schmidt, J. Stampfl, R. Liska:
"Novel Highly Potential Initiators for the Two-Photon-Induced Photopolymerization Process";
in: "Mater. Res. Soc. Symp. Proc.",
herausgegeben von: Materials Research Society;
Material Research Society,
Warrendale, PA, USA,
2009, (eingeladen),
6 S.
B. Seidl, K. Kalinyaprak-Icten, R. Liska:
"New Insights into 1,5-Diphenyl 1,4-Diynone as Photoinitiator";
in: "RadTech Europe 2005 Conference Proceedings Volume II",
Rad Tech Europe Association,
2005,
ISBN: 3-87870-330-9,
S. 57
- 65.
B. Seidl, K. Kalinyaprak-Icten, G. Ullrich, R. Liska:
"New Cross-Conjugated Photoinitiators";
in: "RadTech Europe 2005 Conference Proceedings Volume II",
Rad Tech Europe Association,
2005,
ISBN: 3-87870-330-9,
S. 399
- 406.
B. Seidl, R. Liska:
"2-tert-Butylacrylonitrile, a Non-Polymerizable Monomere for the Investigation of Initiation Mechanism";
in: "RadTech Europe 2005 Conference Proceedings Volume II",
Rad Tech Europe Association,
2005,
ISBN: 3-87870-330-9,
S. 391
- 398.
L. Spoljaric-Lukacic, R. Saf, R. Liska, S. Knaus:
"Free Radical Grafting of Maleimides onto Polyolefins: Studies on Model Compounds";
in: "World Polymer Congress MACRO 2004 - Congress Proceedings",
Centre National de la Recherche Scientific,
Paris, France,
2004,
2 S.
G. Ullrich, S. Jauk, R. Liska:
"How to Avoid the Back Electron Transfer in Type II Photoinitiators";
in: "RadTech Europe 2005 Conference Proceedings Volume II",
Rad Tech Europe Association,
2005,
ISBN: 3-87870-330-9,
S. 407
- 414.
G. Ullrich, R. Liska, P. Burtscher, U. Salz, N. Moszner:
"Investigation of Phenylglycine Derivatives as Coinitiators";
in: "RadTech Europe 2005 Conference Proceedings Volume II",
Rad Tech Europe Association,
2005,
ISBN: 3-87870-330-9,
S. 415
- 422.
Vorträge und Posterpräsentationen (mit Tagungsband-Eintrag)
S. Baudis, H. Bergmeister, K. Ehrmann, C. Dworak, C. Grasl, R. Liska:
"Enhancement of Mechanical Properties of Biogradable Thermoplastic Polyurethane Polymers for Their Application as Artificial Blood Vessel";
Poster: Danube Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017",
Book of Abstracts.com,
(2017),
ISBN: 978-3-9504017-6-9;
S. PO-7.
S. Baudis, D. Bomze, M. Lunzer, J. Stampfl, A. Ovsianikov, R. Liska:
"Poly(vinyl alcohol) based hydrogels for 3D biomaterial constructs";
Poster: 10th World Biomaterials Congress,
Montreal, Canada;
17.05.2016
- 22.05.2016; in: "Book of Abstracts",
(2016),
S. 2693.
S. Baudis, C. Grasl, H. Bergmeister, M. Arras, B. Winter, H. Schima, R. Liska:
"(bio)degradable Urethane-Elastomers For Electrospun Vascular Grafts";
Poster: XXXVII ESAO Congress,
Skopje, R. Macedonia;
08.09.2010
- 11.09.2010; in: "The International Journal of Artificial Organs Vol. 33/No. 7 (2010 July), Abstracts from the XXXVII ESAO Congress",
Wichtig Editore,
Milano - Birmingham - Osaka
(2010),
ISSN: 0391-3988;
S. 467.
S. Baudis, C. Grasl, H. Bergmeister, M. Arras, B. Winter, H. Schima, R. Liska:
"Desing of(Bio)degradable Thermoplastic Urethane-Elastomers for Electrospun Vascular Grafts";
Poster: ESAO - ASAIO Winter School 2011,
Semmering;
26.01.2011
- 29.01.2011; in: "ESAO-ASAIO Winter School",
(2011),
S. 33.
S. Baudis, C. Grasl, H. Bergmeister, H. Schima, J. Stampfl, R. Liska:
"(Bio)abbaubare Urethan-Elastomere für Elektroversponnene Blutgefäßersatzmaterialien";
Poster: 4. Wiener Biomaterialsymposium: Von der Werkstoffentwicklung bis zur klinischen Anwendung,
TU Wien, Wien;
15.11.2010
- 17.11.2010; in: "Tagungsband",
(2010),
S. 7.
S. Baudis, R. Liska:
"Two Approaches for the Development of Materials for Vascular Tissue Regeneration";
Poster: Junior Scientist Conference 2010,
Vienna;
07.04.2010
- 09.04.2010; in: "Proceedings",
(2010),
ISBN: 978-3-200-01797-9;
S. 271
- 272.
S. Baudis, F. Nehl, S. Ligon, H. Wutzel, A. Nigisch, H. Bergmeister, D. Bernhard, J. Stampfl, R. Liska:
"Urethane-based photoelastomers with defined cellular struchture for scaffold-based vascular tissue engineering";
Poster: UPAC 9th International Conference on Advanced Polymers via Macromolecular Engineering (APME 2011),
Cappadocia, TR;
05.09.2011
- 08.09.2011; in: "IUPAC 9th International Conference on Advanced Polymers via Macromolecular Engineering (APME 2011) - Program and Abstract Book",
(2011),
S. 148.
S. Baudis, A. Ovsianikov, J. Stampfl, R. Liska:
"3D Printed Biocompatible Polymers";
Vortrag: Danube Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017",
Book of Abstracts.com,
(2017),
ISBN: 978-3-9504017-6-9;
S. OP-30.
S. Baudis, M. Schuster, C. Heller, C. Turecek, F. Varga, H. Bergmeister, G. Weigel, J. Stampfl, R. Liska:
"Flexible, Biocompatible Photopolymers as Artificial Vascular Grafts";
Poster: 9th Austrian Polymer Meeting,
Graz, A;
26.03.2008
- 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts",
(2008),
S. 61.
S. Baudis, M. Schuster, C. Heller, C. Turecek, F. Varga, H. Bergmeister, G. Weigel, J. Stampfl, R. Liska:
"Flexible, biocompatible Photopolymers as Synthetic Vascular Replacement Materials";
Poster: RadTech Europe 2007 - Europe´s event for UV/EB curing, Vienna 13-15 Nov 2007,
Wien;
13.11.2007
- 15.11.2007; in: "RadTech Europe 2007 - Conference Proceedings",
(2007),
6 S.
S. Baudis, M. Schuster, C. Heller, C. Turecek, F. Varga, H. Bergmeister, G. Weigel, J. Stampfl, R. Liska:
"Photoelastomere als biokompatible Blutgefäßersatzmaterialien";
Poster: 3. Wiener Biomaterialsymposium,
Wien;
19.11.2008
- 21.11.2008; in: "3. Wiener Biomaterialsymposium - Tagungsband",
(2008),
S. 41.
S. Baudis, M. Schuster, C. Heller, C. Turecek, F. Varga, H. Bergmeister, G. Weigel, J. Stampfl, R. Liska:
"Tailored Photoelastomers as Biocompatible Blood Vessel Substitutes";
Poster: International Workshop on Biomacromolecules 2008,
Stockholm, S;
01.06.2008
- 04.06.2008; in: "International Workshop on Biomacromolecules 2008, Book of Abstracts",
(2008).
S. Baudis, M. Schuster, C. Turecek, H. Bergmeister, G. Weigel, J. Stampfl, F. Varga, R. Liska:
"Development of flexible biocompatible photopolymers as artificial vascular replacement materials";
Vortrag: XXXIV ESAO Congress,
Krems, A;
05.09.2007
- 08.09.2007; in: "The International Journal of Artificial Organs, Abstracts of the XXXIV ESAO Congress",
D. Falkenhagen (Hrg.);
The International Journal of Artificial Organs,
30 (8)
(2007),
ISSN: 0391-3988;
S. 705.
S. Baudis, M. Schwentenwein, T. Pulka, B. Steyrer, H. Wilhelm, G. Weigel, H. Bergmeister, J. Stampfl, R. Liska:
"Studies on the mechanical behaviour of Photoelastomers for Vascular Tissue Regeneration.";
Vortrag: RadTech Europe 2009,
Nizza, FR;
14.10.2009
- 15.10.2009; in: "Radtech Europe 2009, Proceedings",
(2009),
6 S.
S. Baudis, B. Steyrer, T. Pulka, H. Wilhelm, G. Weigel, H. Bergmeister, J. Stampfl, R. Liska:
"Photopolymerizable Elastomers for Vascular Tissue Regeneration";
Poster: EPF 2009, European Polymer Congress,
Graz, A;
12.07.2009
- 17.07.2009; in: "EPF'09, Book of Abstracts",
(2009),
S. 130.
S. Baudis, Z. Tomasikova, P. Knaack, X.H. Qin, J. Stampfl, A. Ovsianikov, R. Liska:
"A Thiol-Ene based Modular Material System with Hyaluronic Acid Building Blocks";
Poster: Photopolymerization Fundamentals 2015,
Boulder;
13.09.2015
- 16.09.2015; in: "Abstract USB",
(2015).
S. Baudis, Z. Tomasikova, E. Zerobin, X.H. Qin, P. Gruber, M. Markovic, J. Stampfl, A. Ovsianikov, R. Liska:
"Additive Manufactured, Biocompatible Hydrogels based on Hyaluronic Acid";
Poster: 10th World Biomaterials Congress,
Montreal, Canada;
17.05.2016
- 22.05.2016; in: "Book of Abstracts",
(2016),
S. 2728.
S. Baudis, Z. Tomasikova, E. Zerobin, X.H. Qin, M. Markovic, P. Gruber, J. Stampfl, A. Ovsianikov, R. Liska:
"Laser-microfabricated, biocompatible hydrogels based on hyaluronan";
Poster: TERMIS-EU 2016 conference,
Uppsala, Sweden;
28.06.2016
- 01.07.2016; in: "European Cells&Materials Journal",
European Cells&Materials Journal,
Vol. 31. Suppl. 1, 2016, page P454
(2016),
ISSN: 1473-2262;
S. 454.
S. Baudis, H. Wilhelm, H. Bergmeister, J. Stampfl, R. Liska:
"Additive Manufactured Photoelastomers as Tailor-made Biomaterials for Vascular Tissue Restoration";
Vortrag: European Symposium of Photopolymer Science,
Mulhouse, France;
28.11.2010
- 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book",
(2010).
S. Baudis, H. Wilhelm, H. Bergmeister, J. Stampfl, R. Liska:
"Generativ gefertigte Photoelastomere als maßgeschneiderte Biomaterialien für vaskuläre Geweberegeneration";
Vortrag: 4. Wiener Biomaterialsymposium,
Wien;
15.11.2010
- 17.11.2010; in: "Tagungsband",
J. Stampfl (Hrg.);
(2010),
S. 6.
S. Baudis, E. Zerobin, M. Lunzer, Z. Tomasikova, X.H. Qin, M. Markovic, P. Gruber, J. Stampfl, A. Ovsianikov, R. Liska:
"Microfabricated Biocompatible Hydrogels";
Vortrag: VSS 2017 - Vienna young Scientists Symposium,
Wien;
01.06.2017
- 02.06.2017; in: "VSS 2017",
(2017),
ISBN: 978-3-9504017-5-2;
S. 11.
S. Baudis, E. Zerobin, M. Lunzer, M. Tromayer, M. Markovic, P. Gruber, J. Stampfl, A. Ovsianikov, R. Liska:
"Controlling the Micro-Environment of Cells by Exploitation of Macromolecular Photochemistry";
Vortrag: 12th International Conference on Advanced Polymers via Macromolecular Engineering,
Ghent;
21.05.2017
- 25.05.2017; in: "Advanced Polymers via Macromolecular Engineering",
(2017),
S. 91.
S. Baudis, E. Zerobin, M. Lunzer, M. Tromayer, M. Markovic, P. Gruber, J. Stampfl, A. Ovsianikov, R. Liska:
"Macromolecular Photochemistry: A Toolbox to Control the Micro-Environment of Cells";
Vortrag: 17. Österreichische Chemietage 2017,
Salzburg;
25.09.2017
- 28.09.2017; in: "17. Österreichische Chemietage 2017",
(2017),
S. OP-29.
S. Benedikt, A. Gugg, U. Fischer, B. Ganster, C. Gorsche, N. Moszner, R. Liska:
"New Photopolymers in digital and restorative dentistry";
Vortrag: VSS 2015,
Vienna;
25.06.2015
- 26.06.2015; in: "Book of Abstracts",
Richard Zemann,
(2015),
ISBN: 978-3-9504017-0-7;
S. 122
- 123.
S. Benedikt, N. Moszner, R. Liska:
"Benzoyl pheyltelluride as highly reactive terp-reagent for visible light induced controlled radical polymerization";
Vortrag: DVSPM 2015,
Gmunden;
11.05.2015
- 13.05.2015; in: "Proceedings of a Conference on Polymer Science",
(2015),
ISBN: 978-3-99033-491-1;
S. 127.
S. Benedikt, N. Moszner, R. Liska:
"New And Highly Reactive Visible Light Photoiniferter: Benzoyl Phenyltelluride";
Vortrag: ESPS 2014,
Vienna;
09.09.2014
- 12.09.2014; in: "3rd European Symposium of Photopolymer Science",
(2014),
ISBN: 978-3-9502992-9-8;
S. 76.
S. Benedikt, N. Moszner, R. Liska:
"Water soluble visible light photoinitiators: li-tpo as highly reactive and soluble compound with extraordinary stability";
Poster: DVSPM 2015,
Gmunden;
11.05.2015
- 13.05.2015; in: "Proceedings of a Conference on Polymer Science",
(2015),
ISBN: 978-3-99033-491-1;
S. 127.
S. Benedikt, J. Wang, M. Markovic, N. Moszner, K. Dietliker, A. Ovsianikov, H. Grützmacher, K. Hölzl, R. Liska:
"Highly Efficient Cleavable Photoinitiators for Visible Light curing of Aqueous Formulations";
Vortrag: RadTech Europe 2015 Conference,
Prague;
13.10.2015
- 15.10.2015; in: "Abstract Book",
(2015),
S. 18.
H. Bergmeister, C. Grasl, M. Stoiber, C. Schreiber, N. Seyidova, B. Kapeller, I. Walter, K. Seidler, S. Ligon, S. Baudis, R. Liska, H. Schima:
"Nanostructured, bioresorbable vascular substitutes";
Poster: 5th Biomaterialsymposium,
Vienna;
19.11.2012
- 21.11.2012; in: "Abstracts",
(2012).
D. Bomze, B. Husar, P. Gruber, M. Markovic, A. Ovsianikov, R. Liska:
"Modified Poly(Vinyl Alcohol) based Hydrogels for Tissue Engineering via Thiol-Ene-Crosslinking";
Poster: Photopolymerization Fundamentals 2015,
Boulder;
13.09.2015
- 16.09.2015; in: "Abstract USB",
(2015).
D. Bomze, B. Husar, P. Gruber, M. Markovic, A. Ovsianikov, R. Liska:
"Norbornen Modified Poly(vinyl Alcohol) Based Hydrogels For Tissue Engineering Via Thiol-Ene Crosslinking";
Poster: ESPS 2014,
Vienna;
09.09.2014
- 12.09.2014; in: "3rd European Symposium of Photopolymer Science",
(2014),
S. 147.
D. Bomze, B. Husar, M. Markovic, A. Ovsianikov, R. Liska:
"Novel Low-Toxic Poly(vinyl Alcohol) Based Hydrogels For Tissue Engineering Via Thiol-Ene Crosslinking";
Vortrag: ESPS 2014,
Vienna;
09.09.2014
- 12.09.2014; in: "3rd European Symposium of Photopolymer Science",
(2014),
ISBN: 978-3-9502992-9-8;
S. 132.
D. Bomze, B. Husar, M. Markovic, A. Ovsianikov, R. Liska:
"Novel low-toxic poly(vinyl alcohol) based hydrogels for tissue engineering via thiol-ene crosslinking";
Vortrag: 5th Bratislava Young Polymer Scientists Workshop BYPoS,
Zázrivá;
16.06.2014
- 20.06.2014; in: "BYPoS workshop book",
book of abstracts,
(2014),
ISBN: 978-80-970923-5-1;
S. 57.
D. Bomze, P. Knaack, W. Kern, R. Liska:
"Cationic frontal polymerization for the production of electrical insulating materials";
Vortrag: DVSPM 2015,
Gmunden;
11.05.2015
- 13.05.2015; in: "Proceedings of a Conference on Polymer Science",
(2015),
ISBN: 978-3-99033-491-1;
S. 62.
D. Bomze, P. Knaack, R. Liska:
"Cationic Frontal Polymerization for curing of epoxide resins";
Vortrag: RadTech Europe 2015 Conference,
Prague;
13.10.2015
- 15.10.2015; in: "Abstract Book",
(2015),
S. 38.
D. Bomze, P. Knaack, R. Liska:
"Radical Induced Cationic Frontal Polymerization";
Poster: Photopolymerization Fundamentals 2015,
Boulder;
13.09.2015
- 16.09.2015; in: "Abstract USB",
(2015).
S. Brkic, E. Bovo, P. Gruber, M. Markovic, O. Doriana, T. Flora, M. Asthana, G. Roberto, P. Abhay, J. Rodriguez-Cabello, R. Liska, A. Ovsianikov, A. Banfi:
"Photo-grafting of VEGF protein gradients into elastin-like polymer hydrogels for improved vascularization";
Vortrag: TERMIS-EU 2017: Personalised Therapies for Regenerative Medicine,
Davos;
26.06.2017
- 30.06.2017; in: "eCM Meeting Abstracts 2017, Collection 2; TERMIS-EU 2017 Conference",
eCM Conferences Open Access online periodical,
(2017),
ISSN: 2522-235x;
Paper-Nr. 0141,
1 S.
Y. Catel, P. Fässler, U. Fischer, C. Gorsche, S. Schörpf, S. Tauscher, R. Liska, N. Moszner:
"Evaluation of Difunctional Vinylcyclopropanes as Reactive Diluents for the Development of Low-Shrinkage Composites";
Poster: EPF 2017, European Polymer Congress,
Lyon;
02.07.2017
- 07.07.2017; in: "16th EPF European Polymer Congress",
(2017),
S. 57.
K. Cicha, Z. Li, A. Mautner, K. Stadlmann, J. Torgersen, N.U Pucher, R. Markut-Kohl, R. Liska, J. Stampfl:
"Fabrication and evaluation of 3D-micro-structures produced using two-photon-induced photopolymerization (TPIP or 2PP) by means of optical assessment and FTIR-spectroscopy";
Vortrag: Euromat 2011,
Montpellier, France;
12.09.2011
- 15.09.2011; in: "Conference Proceeding Euromat 2011",
(2011),
S. 0453.
B. Dellago, R. Liska, S. Baudis:
"Acetal Moieties as Biodegradable Functionality in Photopolymers for Bone Regeneration";
Vortrag: VSS 2019 - Vienna Young Scientists Symposium,
Wien;
13.06.2019
- 14.06.2019; in: "Tagungsband_VSS2019_1906042202",
(2019),
ISBN: 978-3-9504017-9-0;
S. 120
- 121.
B. Dellago, S. Orman, R. Liska, S. Baudis:
"Toughness- and Degradability Enhancers for Photopolymers as Bone Replacement Materials";
Vortrag: The 6th (virtual) European Symposium of Photopolymer Science,
Wien;
15.06.2021
- 17.06.2021; in: "vESPS 2021",
(2021),
ISBN: 978-3-9504809-3-1;
S. 119.
A. Dobos, P. Gruber, M. Tromayer, W. Steiger, J. Van Hoorick, S. van Vlierberghe, R. Liska, A. Ovsianikov:
"Laser-based 3D printing of hydrogels: a versatille appoach for accurate 3D cellular modles";
Vortrag: TERMIS World Congress 2018,
Kyoto;
04.09.2018
- 07.09.2018; in: "Abstract Book",
(2018),
S. 261.
A. Dobos, M. Tromayer, P. Gruber, J. Van Hoorick, S. van Vlierberghe, P. Dubruel, R. Liska, A. Ovsianikov:
"Comparason of the effect of photoinitiator P2CK and AS7 on the Viablitiy of Encapsulated Human Adipose-Derivet Stem Cells via Two-Photon Polymerization";
Poster: Donau Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Donau Vltava Sava Polymer Meeting 2017",
Book of Abstract,
(2017),
S. PO-5.
P. Dorfinger, R. Liska, J. Stampfl:
"Toughening of Photopolymers for SLA";
Vortrag: 20. Symposium Verbundwerkstoffe und Werkstoffverbunde 2015,
Wien;
01.07.2015
- 03.07.2015; in: "20th Symposium on Composites",
Materials Science Forum,
Volumes 825-826
(2015),
ISBN: 978-3-03835-515-1;
S. 53
- 59.
P. Dorfinger, J. Stampfl, R. Liska:
"Toughening Of Photopolymers For Stereolithography (sl)";
Poster: 3rd European Symposium of Photopolymer Science,
Vienna;
09.09.2014
- 12.09.2014; in: "3rd European Symposium of Photopolymer Science",
ESPS 2014,
1
(2014),
ISBN: 978-3-9502992-9-8;
S. 25
- 26.
C. Dworak, M. Griesser, G. Gescheidt, R. Liska:
"Oxime esters as potential Coinitiators for Radical Photopolymerization";
Poster: 10th Austrian Polymer Meeting and 2nd Joint Austrian-Slovenian Polymer Meeting 2010,
Leoben;
08.09.2010
- 10.09.2010; in: "Book of Abstracts",
(2010),
S. 196
- 197.
C. Dworak, M. Griessner, G. Gescheidt, G. Grabner, M. Höfer, R. Liska:
"Benzaldoxime esters as alternative Coinitiators for Radical Photopolymerization";
Vortrag: European Symposium of Photopolymer Science,
Mulhouse, France;
28.11.2010
- 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book",
(2010).
C. Dworak, M. Griessner, G. Gescheidt, G. Grabner, S. Jauk, M. Höfer, R. Liska:
"Covalently linked Benzophenone-Amine Photoinitiators with a beta-phenylogous cleavage";
Poster: European Symposium of Photopolymer Science,
Mulhouse, France;
28.11.2010
- 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book",
(2010).
C. Dworak, S. Jauk, R. Liska, D. Neshchadin, A. Rosspeintner, G. Gescheidt:
"Photoinitiators with β-phenylogous cleavage";
Vortrag: RadTech Europe 2009,
Nizza, FR;
14.10.2009
- 15.10.2009; in: "Radtech Europe 2009, Proceedings",
(2009),
7 S.
C. Dworak, S. Jauk, D. Neshchadin, A. Rosspeintner, G. Gescheidt, R. Liska:
"Radical Photoinitiators with β-phenylogous Cleavage";
Poster: EPF 2009, European Polymer Congress,
Graz, A;
12.07.2009
- 17.07.2009; in: "EPF'09, Book of Abstracts",
(2009),
S. 265.
C. Dworak, F. Karasu, R. Liska:
"Self-initiating Monomers";
Vortrag: EPF 2009, European Polymer Congress,
Graz, A;
12.07.2009
- 17.07.2009; in: "EPF'09, Book of Abstracts",
(2009),
S. 227.
C. Dworak, T. Koch, F. Varga, R. Liska:
"Biocompatible phosphorus-containing Polymers for Radical Photopolymerization";
Vortrag: 10th Austrian Polymer Meeting and 2nd Joint Austrian-Slovenian Polymer Meeting 2010,
Leoben;
08.09.2010
- 10.09.2010; in: "Book of Abstracts",
(2010),
S. 76
- 77.
C. Dworak, T. Koch, F. Varga, R. Liska:
"Biocompatible phosphorus-containing Polymers for Radical Photopolymerization";
Poster: European Symposium of Photopolymer Science,
Mulhouse, France;
28.11.2010
- 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book",
(2010).
C. Dworak, S. Kopeinig, H. Hoffmann, R. Liska:
"Hydroxylamine-based monomers";
Hauptvortrag: RadTech Europe 2009,
Nizza, FR;
14.10.2009
- 15.10.2009; in: "Radtech Europe 2009, Proceedings",
(2009),
8 S.
C. Dworak, S. Kopeinig, H. Hoffmann, R. Liska:
"Photoinitiating Monomers based on Di- and Trifunctional Acrylates";
Poster: 9th Austrian Polymer Meeting,
Graz, A;
26.03.2008
- 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts",
(2008),
S. 76.
C. Dworak, S. Kopeinig, F. Karasu, E. Hummer-Koppendorfer, R. Liska:
"Self-Initiating Monomers based on Acrylamides";
Vortrag: RadTech Europe 2009,
Nizza, FR;
14.10.2009
- 15.10.2009; in: "Radtech Europe 2009, Proceedings",
(2009),
7 S.
C. Dworak, F. Varga, R. Liska:
"Phosphorus-based Monomers for radical polymerization";
Vortrag: RadTech Europe 2009,
Nizza, FR;
14.10.2009
- 15.10.2009; in: "Radtech Europe 2009, Proceedings",
(2009),
8 S.
C. Dworak, F. Varga, R. Liska:
"Photopolymerization of Biocompatible Phosphorus-based Monomers";
Poster: EPF 2009, European Polymer Congress,
Graz, A;
12.07.2009
- 17.07.2009; in: "EPF'09, Book of Abstracts",
(2009),
S. 130.
J. Ecker, K. Ehrmann, R. Liska:
"Debonding On Demand For 3d Printing: A (retro) Diels Alder Reaction For Moderate Crosslinked Photopolymers";
Poster: The 6th (virtual) European Symposium of Photopolymer Science,
Wien;
15.06.2021
- 17.06.2021; in: "vESPS 2021",
(2021),
ISBN: 978-3-9504809-3-1;
S. 186.
K. Ehrmann, C. Grasl, H. Bergmeister, H. Schima, B. Podesser, R. Liska, S. Baudis:
"Modular Design Principle for Personalized Artificial Vascular Grafts with Tunable Mechanical Properties and Degradation Speeds";
Vortrag: Termis Eu 2019,
Rhodes, Greece;
27.05.2019
- 31.05.2019; in: "Termis EU 2019",
(2019),
S. 1112.
K. Ehrmann, C. Grasl, H. Bergmeister, H. Schima, B. Podesser, R. Liska, S. Baudis:
"Reconciling Contradicting Properties: Strong Biodegradable Thermoplastic Polyurethanes for Electrospun Small-Diameter Vascular Grafts";
Vortrag: 11th World Biomaterials Congress,
Hampshire, United Kingdom, online;
11.12.2020
- 15.12.2020; in: "11th World Biomaterials Congress",
11th World Biomaterials Congress,
(2020),
S. 1.
K. Ehrmann, C. Grasl, H. Schima, S. Baudis, R. Liska, B. Podesser, H. Bergmeister:
"Bottom-up design of materials boosts long term performance of small-diameter biodegradable vascular prostheses: an in-vivo proof";
Vortrag: 55th Congress of the European Society for Surgical Research,
Innsbruck, online;
10.12.2020
- 11.12.2020; in: "ESSR 2020",
(2020),
S. 1.
K. Ehrmann, K. Seidler, P. Potzmann, C. Dworak, T. Koch, H. Bergmeister, C. Grasl, H. Schima, R. Liska, B. Podesser, S. Baudis:
"Thermopastic Polyurethanes and their Application as Electrospun Biodegradable Soft Tissue Medical Prosthesis";
Vortrag: VSS 2018 - Vienna Young Scientists Symposium,
Wien;
07.06.2018
- 08.06.2018; in: "VSS 2018",
Book-of-Abstracts.com,
(2018),
ISBN: 978-3-9504017-8-3;
S. 110
- 111.
C. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska:
"TEMPLATING OF ORGANIC/INORGANIC HYBRID MATERIALS";
Poster: E-MRS 2005 Spring Meeting,
Strasbourg, France;
31.05.2005
- 03.06.2005; in: "E-MRS 2005 Spring Meeting",
(2005),
S. I - 28/54.
C. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, R. Inführ, T. Koch, S. Seidler:
"Hierarchisch strukturiertes Siliziumdioxid und seine mechanischen Eigenschaften";
Vortrag: 2. Wiener Biomaterialsymposium,
TU Wien;
22.11.2006
- 24.11.2006; in: "2. Wiener Biomaterialsysmposium",
(2006),
9 S.
C. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"Fabrication of Bio-inspired Silica Composites";
Hauptvortrag: MRS Fall Meeting 2004,
Boston (USA);
29.11.2004
- 03.12.2004; in: "2004 MRS Fall Meeting",
MRS,
http://lucy.mrs.org/meetings/fall2004/abstracts/f04_abstract_ee.pdf
(2004),
Paper-Nr. EE 9.15,
1 S.
C. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"NANOSTRUCTURED SILICA/POLYMER-MONOLITHS";
Poster: ISOS XIV, 14th International Symposium on Organosilicon Chemistry; 3rd European Organosilicon Days,
Würzburg, Germany;
31.07.2005
- 05.08.2005; in: "ISOS XIV, 14th International Symposium on Organosilicon Chemistry",
(2005),
S. 158.
Ch. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, R. Inführ, T. Koch, S. Seidler:
"3-Dimensional Mesoporous Silica Monoliths and their Structural and Mechanical Properties";
Vortrag: Polymerwerkstoffe 2006,
Halle/Saale, Deutschland;
27.09.2006
- 29.09.2006; in: "Polymerwerkstoffe 2006 - Abstracts",
(2006),
ISBN: 3-86010-856-5;
S. 34.
Ch. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, R. Inführ, S. Seidler:
"Templating of organic/inorganic hybrid materials";
Poster: EMRS Spring Meeting 2005,
Strasbourg, France;
31.05.2005
- 03.06.2005; in: "European Materials Research Society Spring Meeting E-MRS 2005 - Scienific Programme",
(2005),
S. I -28/54.
Ch. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"Fabrication of Bio-inspired Silica Composites";
Poster: MRS Fall Meeting,
Boston, USA;
29.11.2004
- 03.12.2004; in: "MRS Fall Meeting 2004 - Program & Exhibit Guide",
(2004),
S. 729.
Ch. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"Nonostructured silica/polymer-monoliths";
Poster: ISOSXIV 3rd European Organosilicon Days,
Würzburg, Deutschland;
31.07.2006
- 02.08.2006; in: "ISOSXIV 3rd European Organosilicon Days - Abstracts",
(2006),
S. P071.
S. Fröhlich, H. Bergmeister, R. Liska, M. Marchetti-Deschmann:
"Protein and lipid adsorption on vascular replacement systems studied by mass spectrometry imaging";
Vortrag: OurCon II Imaging Mass Spectrometry Conference,
Antalya, Turkey;
18.11.2014
- 21.11.2014; in: "Abstract Book",
(2014),
S. 55.
S. Fröhlich, M. Strobl, H. Bergmeister, R. Liska, M. Marchetti-Deschmann:
"In vivo protein and lipid adsorption on vascular replacement systems studied by mass spectrometry imaging";
Vortrag: 8th Central and Eastern European Proteomics Conference,
Vienna University of Teechnology (eingeladen);
30.06.2014
- 04.07.2014; in: "Abstractbook",
M. Marchetti-Deschmann, G. Allmaier (Hrg.);
(2014).
B. Ganster, U. Fischer, V. Rheinberger, N. Moszner, R. Liska:
"New visible light PIs for Dental Materials";
Vortrag: RadTech Europe 2007,
Vienna, A (eingeladen);
13.11.2007
- 15.11.2007; in: "RadTech Europe 2007 Conference Proceedings",
(2007),
8 S.
B. Ganster, G. Ullrich, N. Moszner, U. Salz, R. Liska:
"Hydrophilic photoinitiators for acidic aqueous dental formulations";
Vortrag: 8th Austrian Polymer Meeting,
Linz, Austria;
20.09.2006
- 22.09.2006; in: "8th Austrian Polymer Meeting - Abstracts",
(2006).
B. Ganster, G. Ullrich, U. Salz, N. Moszner, R. Liska:
"Water-Soluble Bisacylphosphin oxides for the Photopolymerization of acidic aqueous Dental Formulations";
Poster: RadTech Europe 2007,
Vienna, A;
13.11.2007
- 15.11.2007; in: "RadTech Europe 2007 Conference Proceedings",
(2007),
7 S.
P. Gauss, C. Gorsche, M. Griesser, T. Koch, J. Stampfl, N. Moszner, R. Liska:
"Basic Investigation of Addition Fragmentation Chain Transfer Agents in Photopolymerization of Methacrylic Monomers";
Vortrag: RadTech Europe 2015 Conference,
Prague;
13.10.2015
- 15.10.2015; in: "Abstract Book",
(2015),
S. 16.
P. Gauss, C. Gorsche, M. Griesser, N. Moszner, R. Liska:
"Tuning β-allyl sulfones as chan transfer agents in dimethacrylic photopolymers";
Vortrag: DVSPM 2015,
Gmunden;
11.05.2015
- 13.05.2015; in: "Proceedings of a Conference on Polymer Science",
(2015),
ISBN: 978-3-99033-491-1;
S. 69.
P. Gauss, C. Gorsche, N. Moszner, R. Liska:
"β-Allyl sulfones with different activating groups as chain transfer agents in methacrylate photopolymerization";
Poster: P2M Lacanau,
Lacanau;
26.05.2015
- 29.05.2015; in: "Book of Abstracts",
(2015).
P. Gauss, P. Knaack, R. Liska:
"Replacing aromatic type II photoinitiators with aliphatic compounds";
Poster: 5th European Symposium of Photopolymer Science,
Mulhouse, France;
03.09.2018
- 06.09.2018; in: "5th European Symposium of Photopolymer Science",
5th European Symposium of Photopolymer Science,
(2018),
S. P9.
P. Gauss, P. Knaack, R. Liska:
"Silycyclohexadiens as Anti Oxygen Inhibition and Chain Transfer Reagents";
Poster: Danube Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017",
Book of Abstracts.com,
(2017),
ISBN: 978-3-9504017-6-9;
S. PO-79.
P. Gauss, P. Knaack, R. Liska:
"Substituted Cyclohexadienes as Hydrogen Donor in Radical Photopolymerization";
Poster: RadTech Europe Conference & Exhibition 2017,
Prag;
17.10.2017
- 19.10.2017; in: "RadTech Europe Conference & Exhibition 2017",
(2017),
S. 87.
P. Gauss, N. Moszner, R. Liska:
"Beta-Allyl Sulfones As Transfer Agents In Methacrylic Photopolymers";
Poster: ESPS 2014,
Vienna;
09.09.2014
- 12.09.2014; in: "3rd European Symposium of Photopolymer Science",
(2014),
ISBN: 978-3-9502992-9-8;
S. 164.
P. Gauss, K. Seidler, H. Reghunathan, M. Kury, A. Svirkova, M. Marchetti-Deschmann, P. Dorfinger, T. Koch, J. Stampfl, N. Moszner, C. Gorsche, R. Liska:
"Tailored Photopolymer Networks Using Addition Fragmentation Chain Transfer";
Vortrag: XXII. Bratislava International Conference on Macromolecules,
Bratislava;
06.09.2016
- 09.09.2016; in: "BIMac 2016 Programme Book and Book of Abstracts",
(2016),
ISBN: 978-80-89841-01-1;
S. 12.
G. Gescheidt, D. Neshchadin, M. Griesser, R. Liska:
"Insights Into Early Stages of Radical Polymerization by NMR The CIDNP Effect as a Mechanistic Tool";
Vortrag: 9th Austrian Polymer Meeting,
Graz, A;
26.03.2008
- 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts",
(2008),
S. 29.
R. Gmeiner, E. Fantino, B. Steyrer, A. Samusjew, B. Husar, R. Liska, J. Stampfl:
"Additive Manufacturing of Filled and Unfilled Bio-Photopolymers";
Poster: Jahrestagung der Deutschen Gesellschaft für Biomaterialien 2013,
Erlangen;
26.09.2013
- 28.09.2013; in: "Bionano-Materials",
Bionanomaterials/de Gruyter,
2013/volume 14/number S1
(2013),
ISSN: 2193-0651;
S. 46.
M. Göschl, J. Steindl, K. Ehrmann, R. Liska:
"Blocked Isocyanate Containing Monomers For Tough Photopolymers";
Poster: The 6th (virtual) European Symposium of Photopolymer Science,
Wien;
15.06.2021
- 17.06.2021; in: "vESPS 2021",
(2021),
ISBN: 978-3-9504809-3-1;
S. 223.
C. Gorsche, M. Griesser, D. Neshchadin, A. Rosspeintner, V. Gorelik, B. Ganster, R. Saf, G. Gescheidt, N. Moszner, R. Liska:
"Investigating the mechanism and photoreactivity of germanium based long wavelength photoinitiators for dental materials";
Poster: Photopolymerization Fundamentals 2013,
Jackson Hole;
22.09.2013
- 25.09.2013; in: "Book of Abstracts",
(2013).
C. Gorsche, A. Gugg, N. Moszner, R. Liska:
"UV-Initiated Frontal Polymerization for Dental Composites";
Vortrag: E-MRS 2012 FALL MEETING (European Materials research Society),
Warschau;
17.09.2012
- 21.09.2012; in: "E-Mrs 2012 Fall Meeting",
(2012).
C. Gorsche, A. Gugg, N. Moszner, R. Liska:
"UV-initiated frontal polymerization with peracrylates";
Vortrag: RadTech Europe 2011,
Basel, CH;
18.10.2011
- 20.10.2011; in: "RadTech Europe 2011 - Abstract Book",
(2011).
C. Gorsche, P. Knaack, D. Bomze, K. Seidler, P. Gauss, M. Griesser, I. Krossing, T. Koch, N. Moszner, R. Liska:
"Toughening of Radical Photopolymer Networks and Advances in Cationic Photopolymerization";
Vortrag: Noblelight UV Technical Seminar 2016,
Tokio;
22.04.2016; in: "21st Noblelight UV Technical Seminar",
21st Noblelight UV Technical Seminar-proceedings,
(2016),
S. 05.
C. Gorsche, T. Koch, N. Moszner, J. Stampfl, R. Liska:
"Allyl Sulfone / Dimethacrylate Networks: Homogeneous And Tough Photopolymer Networks For Biomedical Applications";
Vortrag: ESPS 2014,
Vienna;
09.09.2014
- 12.09.2014; in: "3rd European Symposium of Photopolymer Science",
(2014),
ISBN: 978-3-9502992-9-8;
S. 73.
C. Gorsche, R. Liska, S. Ligon, B. Husar, A. Mautner, M. Schwentenwein, C. Heller, J. Stampfl, G. Russmüller:
"A new Generation of low toxic Monomers for Additive Manufacturing Technology";
Vortrag: E-MRS 2012 FALL MEETING (European Materials research Society),
Warschau;
17.09.2012
- 21.09.2012; in: "E-MRS 2012 Fall Meeting",
(2012).
C. Gorsche, A. Mautner, A. Gugg, X.H. Qin, N. Moszner, J. Stampfl, K. Macfelda, G. Russmüller, R. Liska:
"UV-Initiated Frontal Polymerization and Other New Advances in Radical Photopolymerization";
Vortrag: 18th Fusion UV Seminar 2012,
Osaka, Tokio (eingeladen);
21.02.2012
- 23.02.2012; in: "18th Fusion UV Seminar 2012 - Proceedings",
(2012),
S. 2-1.
C. Gorsche, A. Ovsianikov, J. Stampfl, R. Liska:
"Photopolymerization: providing A triangle for material design, Biomaterials, and 3D printing";
Vortrag: VSS 2015,
Vienna;
25.06.2015
- 26.06.2015; in: "Book of Abstracts",
Richard Zemann,
(2015),
ISBN: 978-3-9504017-0-7;
S. 138
- 139.
C. Gorsche, H. Reghunathan, S. Baudis, P. Knaack, B. Husar, J. Laeuger, H. Hoffmann, R. Liska:
"In situ investigation of photopolymerization reactions via real time-NIR/MIR-photorheology";
Vortrag: RadTech Europe Conference & Exhibition 2017,
Prag;
17.10.2017
- 19.10.2017; in: "RadTech Europe Conference & Exhibition 2017",
(2017),
S. 11.
C. Gorsche, H. Reghunathan, S. Baudis, P. Knaack, B. Husar, J. Laeuger, H. Hoffmann, R. Liska:
"Real Time Monitoring of Photopolymerization Reactions via NIR/MIR-Photorheology";
Vortrag: Danube Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017",
Book of Abstracts.com,
(2017),
ISBN: 978-3-9504017-6-9;
S. OP-72.
C. Gorsche, K. Seidler, P. Gauss, M. Griesser, T. Koch, G. Gescheidt, N. Moszner, R. Liska:
"Efficient tuning of (meth)acrylate polymer network architecture for 3D Printing";
Vortrag: P2M Lacanau,
Lacanau (eingeladen);
26.05.2015
- 29.05.2015; in: "Abstracts",
(2015).
C. Gorsche, K. Seidler, P. Gauss, M. Griesser, T. Koch, N. Moszner, R. Liska:
"Addition Fragmentation Chain Transfer Reagents With Various Activating And Leaving Groups And Their Potential As Network Modifiers";
Poster: Photopolymerization Fundamentals 2015,
Boulder;
13.09.2015
- 16.09.2015; in: "Abstract USB",
(2015).
C. Gorsche, K. Seidler, P. Gauss, G. Harakaly, M. Griesser, T. Koch, J. Stampfl, N. Moszner, R. Liska:
"Tough And Low Shrinkage Photopolymers For 3d-Printing";
Vortrag: Photopolymerization Fundamentals 2015,
Boulder;
13.09.2015
- 16.09.2015; in: "Abstract USB",
(2015).
C. Gorsche, K. Seidler, M. Griesser, T. Koch, N. Moszner, R. Liska:
"Using Addition Fragmentation Chain Transfer For Tough Methacrylate-Based Networks With Low Shrinkage Stress";
Poster: Photopolymerization Fundamentals 2015,
Boulder;
13.09.2015
- 16.09.2015; in: "Abstract USB",
(2015).
C. Gorsche, K. Seidler, M. Kury, J. Steindl, P. Dorfinger, J. Stampfl, N. Moszner, R. Liska:
"The power of chain transfer in the field of photopolymer applications";
Poster: 12th International Conference on Advanced Polymers via Macromolecular Engineering,
Ghent;
21.05.2017
- 25.05.2017; in: "Advanced Polymers via Macromolecular Engineering",
Advanced Polymers via Macromolecular Engineering,
Nr.12, Ghent, Belgium
(2017),
S. 143.
C. Gorsche, K. Seidler, H. Reghunathan, P. Gauss, M. Kury, P. Dorfinger, T. Koch, J. Stampfl, N. Moszner, R. Liska:
"Addition fragmentation chain transfer: Enriching the field of photopolymer applications";
Vortrag: 4th European Symposium of Photopolymer Science,
Leipzig;
11.09.2016
- 14.09.2016; in: "ESPS 2016",
(2016),
S. O-7.
C. Gorsche, J. Stampfl, R. Liska:
"Photopolymerization: A powerful technique for the fabrication and 3D printing of biomaterials";
Vortrag: ISBPPB 2015,
Orlando (eingeladen);
08.07.2015
- 10.07.2015; in: "Abstracts",
(2015).
C. Gorsche, M. Tromayer, Z. Li, J. Torgersen, A. Ajami, A. Rosspeintner, S. Naumov, T. Scherzer, A. Ovsianikov, R. Liska:
"Efficent synthesis of two-photon initiators via one step aldol condensation";
Poster: Photopolymerization Fundamentals 2013,
Jackson Hole;
22.09.2013
- 25.09.2013; in: "Book of Abstracts",
(2013).
M. Griesser, G. Gescheidt, R. Liska:
"Elucidating Reaction Mechanisms of Photoinitiators by Magnetic Resonance";
Vortrag: RadTech Europe 2013,
Basel;
15.10.2013
- 17.10.2013; in: "Abstract Book",
(2013),
S. 36.
M. Griesser, G. Gescheidt, R. Liska:
"Insights into the Reactivity of Photoinitiators by Magnetic Resonance";
Poster: 6th-Pacific Symposium on Radical Chemistry (6th-PSRC),
Vancouver;
16.06.2013
- 20.06.2013; in: "6th Pacific Symposium on Radical Chemistry - Programme",
(2013).
M. Griesser, C. Gorsche, N. Moszner, R. Liska:
"Mechanistic Investigations Of Chain Transfer Reagents";
Vortrag: ESPS 2014,
Vienna;
09.09.2014
- 12.09.2014; in: "3rd European Symposium of Photopolymer Science",
(2014),
ISBN: 978-3-9502992-9-8;
S. 112.
M. Griesser, B. Husar, P. Sehnal, K. Harper, A. Rose, D. Anderson, R. Liska:
"A New Variant Of Phosphine Oxide Photoinitiators";
Poster: ESPS 2014,
Vienna;
09.09.2014
- 12.09.2014; in: "3rd European Symposium of Photopolymer Science",
(2014),
ISBN: 978-3-9502992-9-8;
S. 166.
M. Griesser, A. Rosspeintner, C. Dworak, G. Gescheidt, R. Liska:
"Insights into the Reactivity of Benzaldoxime Esters as Photoinitiators";
Poster: RadTech Europe 2013,
Basel;
15.10.2013
- 17.10.2013; in: "Abstract Book",
(2013),
S. 119.
P. Gruber, M. Markovic, K. Hölzl, M. Tromayer, S. Van Vlierberghe, P. Dubruel, R. Liska, J. Stampfl, A. Ovsianikov:
"Laser photofabrication of 3D cell-containing hydrogel constructs";
Poster: 2014 Tissue Engineering and Regenerative Medicine International Society-Asia Pacific Meeting (TERMIS-AP 2014),
Daegu, S. Korea;
24.09.2014
- 27.09.2014; in: "2",
(2014).
P. Gruber, M. Markovic, K. Hölzl, M. Tromayer, S. Van Vlierberghe, P. Dubruel, R. Liska, J. Stampfl, A. Ovsianikov:
"Laser photofabrication of 3D cell-containing hydrogel constructs";
Vortrag: ICB 2014,
Pohang, S. Korea;
28.09.2014
- 01.10.2014; in: "International Conference on Biofabrication",
(2014).
P. Gruber, M. Markovic, K. Hölzl, M. Tromayer, S. Van Vlierberghe, P. Dubruel, R. Liska, J. Stampfl, A. Ovsianikov:
"Laser Photofabrication of Cell-Containing Hydrogel Constructs";
Poster: LPM 2014,
Vilnius;
17.06.2014
- 20.06.2014; in: "LPM 2014 Program & Technical Digest",
(2014),
S. 263.
P. Gruber, M. Markovic, K. Hölzl, M. Tromayer, S. Van Vlierberghe, P. Dubruel, R. Liska, J. Stampfl, A. Ovsianikov:
"Laser Photofabrication of Cell-Containing Hydrogel Constructs";
Poster: 3rd European Symposium of Photopolymer Science,
Vienna;
09.09.2014
- 12.09.2014; in: "3rd European Symposium of Photopolymer Science",
(2014),
S. 167.
P. Gruber, M. Markovic, L. Kain, O.G. Andriotis, M. Tromayer, P. Dubruel, S. van Vlierberghe, P.J. Thurner, R. Liska, A. Ovsianikov:
"Stiffness Guided Cell Migration in 3D Hydrogels via Multiphoton Grafting";
Poster: Donau Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Donau Vltava Sava Polymer Meeting 2017",
Book of Abstract,
(2017),
S. PO-8.
P. Gruber, M. Markovic, M. Tromayer, S Mühleder, J. Van Hoorick, K. Hölzl, W Holnthoner, H. Redl, P. Dubruel, R. Liska, S. Van Vlierberghe, A. Ovsianikov:
"Laser photofabrication of 3D hydrogel structures within microfluidic channels";
Vortrag: International Conference on Biofabrication 2016,
Winston-Salem, North Carolina, USA;
29.10.2016
- 31.10.2016; in: "Biofabrication 2016",
elsevier,
(2016),
S. OP-16.
S. Gruber, R. Felzmann, G. Mitteramskogler, R. Liska, J. Stampfl:
"Generation of ceramic parts via lithography-based AMT";
Vortrag: Materials Science and Engineering 2012,
Darmstadt;
25.09.2012
- 27.09.2012; in: "MSE Programme",
(2012),
S. 37.
S. Gruber, G. Mitteramskogler, R. Felzmann, P. Tesavibul, R. Liska, J. Stampfl:
"Generative Erzeugung von biokeramischen Bauteilen";
Vortrag: Rapid.Tech 2012,
Erfurt;
08.05.2012
- 09.05.2012; in: "Fachmesse und Anwendertagung für Rapid-Technologie",
(2012),
ISBN: 978-3-932875-34-2;
S. 88 (105).
S. Gruber, J. Torgersen, A. Neumeister, R. Felzmann, R. Liska, J. Stampfl:
"Advanced Photopolymer-based Additive Manufacturing Systems Using High Performance Light Sources";
Vortrag: 7th International Symposium on Emerging and Industrial DLP® Applications,
Frankfurt;
30.10.2012; in: "7th International Symposium on Emerging and Industrial DLP® Applications",
(2012).
D. Grunenberg, C. Gorsche, M. Griesser, G. Gescheidt, N. Moszner, R. Liska:
"Dimethacrylate Networks with Tunable Properties: The High Effectiveness of β-Allyl Sulfone Chain Transfer Agents";
Poster: RadTech Europe 2015 Conference,
Prague;
13.10.2015
- 15.10.2015; in: "Abstract Book",
(2015),
S. 83.
D. Grunenberg, C. Gorsche, M. Griesser, T. Koch, P. Dorfinger, J. Stampfl, N. Moszner, R. Liska:
"Tough Dimethacrylate Networks with Low Shrinkage Stress: Benefiting from β-Allyl Sulfones as Addition-Fragmentation Chain Transfer Agents";
Poster: BPS 2015,
Bayreuth;
20.09.2015
- 22.09.2015; in: "Book of Abstracts",
(2015).
D. Grunenberg, C. Gorsche, R. Liska:
"Tough Hyperbranched Polymers via Photopolymerization of Hybrid Oligomers";
Poster: RadTech Europe Conference & Exhibition 2017,
Prag;
17.10.2017
- 19.10.2017; in: "RadTech Europe Conference & Exhibition 2017",
(2017),
S. 86.
D. Grunenberg, C. Gorsche, R. Liska:
"Toughening Photopolymers: The Concept of Hybrid Oligomers";
Poster: Danube Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017",
Book of Abstracts.com,
(2017),
ISBN: 978-3-9504017-6-9;
S. OP-91.
A. Gugg, B. Ganster, U. Fischer, N. Moszner, R. Liska:
"Acylgermanium Derivatives as New Visible Light Photoinitiators for Dental Materials";
Poster: 9th Austrian Polymer Meeting,
Graz, A;
26.03.2008
- 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts",
(2008),
S. 99.
A. Gugg, B. Ganster, N. Moszner, R. Liska:
"Investigations on Acylsilanes as Photoinitiator for Radical Polymerization";
Poster: RadTech Europe 2009,
Nizza, FR;
14.10.2009
- 15.10.2009; in: "Radtech Europe 2009, Proceedings",
(2009),
8 S.
A. Gugg, B. Ganster, N. Moszner, R. Liska:
"New Visible Light Photoinitiators for Dental Composites";
Vortrag: 13. Österreichische Chemietage,
Wien;
24.08.2009
- 27.08.2009; in: "13. Österreichische Chemietage",
(2009),
ISBN: 978-3-900554-66-8.
A. Gugg, B. Ganster, D. Neshchadin, M. Griesser, C. Hametner, R. Saf, N. Moszner, G. Gescheidt, R. Liska:
"Mechanistic Investigations on Germanium-based Photoinitiators";
Vortrag: RadTech Europe 2009,
Nizza, FR;
14.10.2009
- 15.10.2009; in: "Radtech Europe 2009, Proceedings",
(2009),
9 S.
A. Gugg, N. Moszner, R. Liska:
"Chain Transfer Reagents in Radical Photopolymerization";
Poster: 10th Austrian Polymer Meeting and 2nd Joint Austrian-Slovenian Polymer Meeting 2010,
Leoben;
08.09.2010
- 10.09.2010; in: "Book of Abstracts",
(2010),
S. 194
- 195.
A. Gugg, H. Wutzel, N. Moszner, R. Liska:
"Controlled photopolymerization by addition fragmentation chain transfer agents";
Poster: RadTech Europe 2011,
Basel, CH;
18.10.2011
- 20.10.2011; in: "RadTech Europe 2011 - Abstract Book",
(2011),
S. 134.
G. Harakaly, C. Gorsche, K. Seidler, H. Reghunathan, P. Dorfinger, T. Koch, J. Stampfl, N. Moszner, R. Liska:
"Formation of tough photopolymer networks using addition fragmentation chain transfer: A viable concept for lithography based 3D printing";
Poster: 4th European Symposium of Photopolymer Science,
Leipzig;
11.09.2016
- 14.09.2016; in: "ESPS 2016",
(2016),
S. P-55.
G. Harakaly, K. Seidler, M. Griesser, C. Gorsche, J. Stampfl, R. Liska:
"α-Sulfonoxy acrylate chain transfer agents for 3D printing of tough photopolymers";
Poster: RadTech Europe 2015 Conference,
Prague;
13.10.2015
- 15.10.2015; in: "Abstract Book",
(2015),
S. 85.
C. Haslinger, A. Zahoranova, R. Liska, S. Baudis:
"Photocrosslinking Of Coumarin-Modified Poly(2-Oxazoline)s";
Poster: The 6th (virtual) European Symposium of Photopolymer Science,
Wien;
15.06.2021
- 17.06.2021; in: "vESPS 2021",
(2021),
ISBN: 978-3-9504809-3-1;
S. 197.
M. Hatzenbichler, R. Felzmann, S. Gruber, G. Mitteramskogler, P. Tesavibul, J. Stampfl, R. Liska:
"Additive Manufacturing of high performance ceramic structures";
Hauptvortrag: 4m 2012,
Wien;
09.10.2012
- 11.10.2012; in: "Multi-material Micro Manufacture",
H. Noll, N. Adamovic, S. Dimov (Hrg.);
Research Publishing,
(2012),
ISBN: 978-98107-3353-7;
S. 16
- 19.
M. Heinze, D. Pospiech, B. Voit, S. Baudis, R. Liska, A. Naumova, K. Saalwächter:
"Influence of Preparation Conditions on the Structure of Photocrosslinked Solvogels";
Poster: Danube Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017",
Book of Abstracts.com,
(2017),
ISBN: 978-3-9504017-6-9;
S. PO-36.
S. Helfert, C. Dworak, E. Sevcsik, H. Peterlik, D. Ret, M. Sauer, R. Liska:
"Synthesis and Characterization of Polymer Linker Systems for Cell Studies";
Vortrag: Bypos Workshop 2017,
Zemplínská Sírava, Slovakia;
12.06.2017
- 16.06.2017; in: "Bypos Workshop Book 2017",
(2017),
S. 29.
S. Helfert, C. Dworak, E. Sevcsik, H. Peterlik, M. Sauer, D. Ret, R. Liska:
"Design and Synthesis of Tailor-made Nanostructured Polymer Biointerfaces";
Vortrag: Danube Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017",
Book of Abstracts.com,
(2017),
ISBN: 978-3-9504017-6-9;
S. OP-11.
S. Helfert, C. Dworak, E. Sevcsik, H. Peterlik, M. Sauer, D. Ret, R. Liska:
"Synthesis and Characterization of Polymer Linker systems for T-cell activation";
Poster: 12th International Conference on Advanced Polymers via Macromolecular Engineering,
Ghent;
21.05.2017
- 25.05.2017; in: "Advanced Polymers via Macromolecular Engineering",
(2017),
S. 133.
S. Helfert, J. Hellmeier, E. Sevcsik, R. Liska, S. Baudis:
"Tailor-made biointerfaces on oxidic substrates via polymer brushes";
Vortrag: Termis Eu 2019,
Rhodes, Greece;
27.05.2019
- 31.05.2019; in: "Termis EU 2019",
(2019),
S. 1338.
S. Helfert, J. Hellmeier, E. Sevcsik, R. Liska, S. Baudis:
"Tailor-made Polymer Interfaces - Surfaces on Demand";
Vortrag: VSS 2018 - Vienna Young Scientists Symposium,
Wien;
07.06.2018
- 08.06.2018; in: "VSS 2018",
Book-of-Abstracts.com,
(2018),
ISBN: 978-3-9504017-8-3;
S. 84
- 85.
C. Heller, N.U Pucher, B. Seidl, R. Liska:
"New cross-conjugated photoinitiators";
Poster: 8th Austrian Polymer Meeting,
Linz, Austria;
20.09.2006
- 22.09.2006; in: "8th Austrian Polymer Meeting - Abstracts",
(2006),
S. 32.
C. Heller, X.H. Qin, M. Schwentenwein, G. Russmüller, F. Varga, R. Liska, J. Stampfl:
"3D-Photopolymere auf Basis vonPolyvinylalkohol: Von der Synthese zur in-vivo-Anwendung";
Vortrag: 4. Wiener Biomaterialsymposium,
Wien;
15.11.2010
- 17.11.2010; in: "Tagungsband",
J. Stampfl (Hrg.);
(2010),
S. 3.
C. Heller, M. Schuster, S. Baudis, C. Turecek, F. Varga, H. Bergmeister, G. Weigel, J. Stampfl, R. Liska:
"3d-Fabrication of Photopolymers as Scaffolds for Tissue Engineering using Rapid Prototyping";
Vortrag: 9th Austrian Polymer Meeting,
Graz, A;
26.03.2008
- 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts",
(2008),
S. 10.
C. Heller, M. Schuster, S. Baudis, C. Turecek, F. Varga, H. Bergmeister, G. Weigel, J. Stampfl, R. Liska:
"New Materials for 3D-Scaffolds for Tissue Engineering Applications";
Vortrag: TERMIS-EU 2008 Meeting,
Porto, P;
22.06.2008
- 28.06.2008; in: "Abstracts from TERMIS-EU 2008 Meeting",
Tissue Engineering, Part A,
Vol. 14 / No. 5
(2008),
ISSN: 1937-3341;
S. 761.
C. Heller, M. Schwentenwein, S. Baudis, R. Thaler, F. Varga, J. Stampfl, R. Liska:
"3D Fabrication of new poly(vinyl alcohol) based Scaffolds for Tissue Engineering";
Vortrag: RadTech Europe 2009,
Nizza, FR;
14.10.2009
- 15.10.2009; in: "Radtech Europe 2009, Proceedings",
(2009),
7 S.
C. Heller, M. Schwentenwein, S. Baudis, C. Turecek, F. Varga, J. Stampfl, R. Liska:
"3D Fabrication of new poly(vinyl alcohol) based scaffolds for Tissue Engineering and Regeneration";
Poster: International Workshop on Biomacromolecules 2008,
Stockholm, S;
01.06.2008
- 04.06.2008; in: "International Workshop on Biomacromolecules 2008, Book of Abstracts",
(2008).
C. Heller, M. Schwentenwein, S. Baudis, C. Turecek, F. Varga, J. Stampfl, R. Liska:
"Polyvinylalkohol basierende Photopolymere für die generative Fertigung von Gerüststrukturen für Tissue Engineering";
Vortrag: 3. Wiener Biomaterialsymposium,
Wien;
19.11.2008
- 21.11.2008; in: "3. Wiener Biomaterialsymposium - Tagungsband",
(2008),
ISBN: 978-3-200-01613-2;
S. 3.
C. Heller, M. Schwentenwein, R. Liska, J. Stampfl, F. Varga, M. Porodec, M. Schulz-Siegmund, G. Russmüller:
"New 3D-Biophotopolymers with Selective Surface-cell Interactions for Regnerative Medicine";
Vortrag: MRS Fall Meeting 2009,
Boston, MA, USA;
30.11.2009
- 03.12.2009; in: "E-MRS 2008 spring meeting",
(2009).
C. Heller, M. Schwentenwein, M. Porodec, M. Schulz-Siegmund, J. Stampfl, F. Varga, R. Liska:
"Poly(vinyl alcohol) based monomers for lithography-based 3D fabrication";
Vortrag: World Congress on Medical Physics and Biomedical Engineering,
München (eingeladen);
07.09.2009
- 12.09.2009; in: "IFMBE Proceedings",
O. Dössel, W. Schlegel (Hrg.);
25
(2009),
ISBN: 978-3-642-03897-6;
4 S.
C. Heller, M. Schwentenwein, N.U Pucher, K. Stadlmann, T. Koch, F. Varga, J. Stampfl, R. Liska:
"3D fabrication of new poly(vinyl alcohol) based Scaffolds for Tissue Engineering";
Poster: Radtech Europe Conference 2009,
Nizza;
14.10.2009
- 15.10.2009; in: "UV/EB- Sustainable Technology",
D. Helsby (Hrg.);
(2009).
C. Heller, M. Schwentenwein, F. Varga, R. Liska, J. Stampfl:
"Biocompatible and biodegradable photopolymers for microstereolithography";
Vortrag: 5th International Congress on Laser Advanced Materials Processing,
Kyoto (eingeladen);
29.06.2009
- 02.07.2009; in: "Proceedings of LAMP2009",
I. Miyamoto (Hrg.);
Japan Laser Processing Society,
Osaka
(2009),
Paper-Nr. #09-092,
5 S.
C. Heller, M. Schwentenwein, F. Varga, G. Russmüller, J. Stampfl, R. Liska:
"3D Fabrication of Poly(vinyl alcohol) based monomers";
Vortrag: 13. Österreichische Chemietage,
Wien;
24.08.2009
- 27.08.2009; in: "13. Österreichische Chemietage",
(2009),
ISBN: 978-3-900554-66-8.
M. Höfer, C. Heller, R. Liska:
"New Sulfonium Salt based Photoinitiators for Cationic Photopolymerization";
Poster: RadTech Europe 2007,
Vienna, A;
13.11.2007
- 15.11.2007; in: "RadTech Europe 2007 Conference Proceedings",
(2007),
7 S.
M. Höfer, S. Landertshamer, R. Liska:
"Cationic Photoinitiators based on Phenylethynyl onium salts";
Vortrag: RadTech Europe 2009,
Nizza, FR;
14.10.2009
- 15.10.2009; in: "Radtech Europe 2009, Proceedings",
(2009),
9 S.
M. Höfer, R. Liska:
"Red-shifted Cationic Photoinitiators with selective Cleavage Mechanism";
Poster: 9th Austrian Polymer Meeting,
Graz, A;
26.03.2008
- 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts",
(2008),
S. 74.
M. Höfer, N. Moszner, R. Liska:
"Singlet Oxygen Reactive Components for Radiation Curable Formulations";
Vortrag: RadTech Europe 2007,
Vienna, A (eingeladen);
13.11.2007
- 15.11.2007; in: "RadTech Europe 2007 Conference Proceedings",
(2007),
7 S.
F. Höller, A. Ovsianikov, J. Torgersen, T. Koch, D. Dekel, S. Levenberg, S. Nürnberger, H. Redl, R. Liska, J. Stampfl:
"Laser microfabrication of elastic 3D scaffolds";
Poster: 5. Wiener Biomaterialsymposium,
Wien;
19.11.2012
- 21.11.2012; in: "Abstracts 5th Biomaterialsymposium Vienna",
(2012),
S. 107
- 108.
K. Hölzl, M. Markovic, P. Gruber, J. Van Hoorick, S. Van Vlierberghe, P. Dubruel, R. Liska, A. Ovsianikov:
"Photosensitive gelatine-methacrylamide as engineered extracellular matrix for three-dimensional cell culture";
Poster: TERMIS-EU 2016 Conference,
Uppsala;
28.06.2016
- 01.07.2016; in: "Towards Future Regenerative Therapies",
European Cells and Materials Journal,
31
(2016),
ISSN: 1473-2262;
S. 215.
K. Hölzl, J. Van Hoorick, S. van Vlierberghe, P. Dubruel, R. Liska, H. Redl, S. Nürnberger, A. Ovsianikov:
"Photosensitive Gelatin-Methacrylamide in 3D cell culture";
Poster: Donau Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Donau Vltava Sava Polymer Meeting 2017",
Book of Abstract,
(2017),
S. PO-13.
A. Hofecker, P. Knaack, R. Liska:
"New Approaches for the Synthesis of low toxic Vinyl ester-based Monomers";
Poster: 4th European Symposium of Photopolymer Science,
Leipzig;
11.09.2016
- 14.09.2016; in: "ESPS 2016",
(2016),
S. P-51.
A. Hofecker, P. Knaack, M. Markovic, T. Koch, A. Ovsianikov, R. Liska:
"New Approaches for the Synthesis of low toxic Monomers";
Poster: 5th European Symposium of Photopolymer Science,
Mulhouse, France;
03.09.2018
- 06.09.2018; in: "5th European Symposium of Photopolymer Science",
5th European Symposium of Photopolymer Science,
(2018),
S. PO12.
A. Hofecker, S. Orman, P. Knaack, S. Baudis, R. Liska:
"Low toxic monomers for 3D printing photopolymer-based bone substitutes";
Poster: European Polymer Congress 2019 (EPF 2019),
Crete, Greece;
09.06.2019
- 14.06.2019; in: "European Polymer Congress 2019 (EPF 2019)",
(2019),
S. 848.
B. Holzer, D. Lumpi, M. Tromayer, P. Gruber, E. Horkel, A. Ovsianikov, R. Liska, J. Fröhlich:
"Initiators For Two Photon Induced Polymerization Based On A Novel Cap-Linker-Cap System";
Poster: 3rd European Symposium of Photopolymer Science,
Vienna;
09.09.2014
- 12.09.2014; in: "European Symposium of Photopolymer Science - Abstract Book",
(2014),
ISBN: 978-3-9502992-9-8;
S. PO-37.
B. Holzer, M. Tromayer, D. Lumpi, A. Ajami, E. Horkel, W. Husinsky, A. Ovsianikov, R. Liska, J. Fröhlich:
"Cap-Linker-Cap Systems as Initiators for Two-Photon Induced-Polymerization";
Poster: LPM 2014,
Vilnius;
17.06.2014
- 20.06.2014; in: "LPM 2014 Program & Technical Digest",
(2014),
S. 260.
E. Horkel, B. Holzer, M. Lunzer, D. Lumpi, M. Tromayer, P. Gruber, A. Ovsianikov, R. Liska, J. Fröhlich:
"Cap-Linker-Cap Systems As Initiators For Two-Photon Induced Polymerization: A Theoretical Approach";
Poster: 3rd European Symposium of Photopolymer Science,
Vienna;
09.09.2014
- 12.09.2014; in: "3rd European Symposium of Photopolymer Science - Abstract Book",
(2014),
ISBN: 978-3-9502992-9-8;
S. PO-38.
B. Husar, C. Gorsche, X.H. Qin, H. Hoffmann, R. Liska:
"Monitoring Of Uv-Curing By Real Time Ftir - Photorheology";
Vortrag: ESPS 2014,
Vienna;
09.09.2014
- 12.09.2014; in: "3rd European Symposium of Photopolymer Science",
(2014),
ISBN: 978-3-9502992-9-8;
S. 108.
B. Husar, C. Gorsche, X.H. Qin, H. Hoffmann, R. Liska:
"Real Time FTIR - Photorheology: A Powerful Tool for Monitoring Changes in Chemical and Viscoelastic Properties During UV-Curing";
Poster: IRDG Spring Meeting Vienna,
Wien;
24.04.2014
- 25.04.2014; in: "Program & Poster Abstracts",
(2014).
B. Husar, H. Hoffmann, S. Ligon, R. Liska, H. Wutzel:
"Assessment of effectiveness of various antioxygen inhibition strategies in LED curing";
Vortrag: PRA´s 8th International Woodcoatings Congress,
Asterdam;
30.10.2012
- 31.10.2012; in: "Congress Papers",
PRA Coatings Technology Centre,
Hampton, Middlesex, UK
(2012),
ISBN: 978-0-9561357-3-5.
B. Husar, A. Mautner, C. Heller, P. Esfandiari, F. Varga, J. Stampfl, R. Liska:
"Low toxic alternatives to (meth)acrylates: Vinyl esters, vinyl carbonates, and vinyl carbamates";
Vortrag: RadTech Asia 2013,
Shanghai;
20.05.2013
- 24.05.2013; in: "Guide Book",
(2013).
B. Husar, A. Mautner, C. Heller, M. Schwentenwein, F. Varga, T. Koch, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"3D scaffolds from low toxic vinyl carbonates";
Poster: 5th Biomaterialsymposium,
Vienna;
19.11.2012
- 21.11.2012; in: "Abstracts",
J. Stampfl (Hrg.);
(2012),
S. 105.
B. Husar, A. Mautner, C. Heller, F. Varga, T. Koch, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"Biodegradable Bone Replacement Material From Low Cytotoxic Monomers";
Poster: TERMIS-EU 2013,
Istanbul;
17.06.2013
- 20.06.2013; in: "Abstracts",
(2013),
S. 244.
B. Husar, A. Mautner, C. Heller, F. Varga, T. Koch, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"Vinyl Carbonates and Vinyl Esters: From Synthesis to In Vivo Testing of Bone Replacement Material";
Vortrag: 25th European Conference on Biomaterials,
Madrid;
08.09.2013
- 12.09.2013; in: "Book of contributions",
(2013),
ISBN: 978-84-695-7831-5.
B. Husar, A. Samusjew, T. Koch, J. Stampfl, R. Liska:
"3D fabrication of scaffolds from low cytotoxic vinylester and thiols";
Poster: TERMIS/EU 2014,
Genova;
10.06.2014
- 13.06.2014; in: "Meeting Abstracts",
J Tissue Eng Regen Med,
8 (Suppl. 1)
(2013),
ISSN: 1932-7005;
S. 447.
B. Husar, M. Schwentenwein, C. Heller, A. Mautner, F. Varga, G. Russmüller, J. Stampfl, R. Liska:
"Biocompatible and biodegradable photopolymers from low cytotoxic vinyl esters";
Poster: RadTech Europe 2011,
Basel, CH;
18.10.2011
- 20.10.2011; in: "RadTech Europe 2011 - Abstract Book",
(2011),
S. 118.
B. Husar, M. Schwentenwein, C. Heller, F. Varga, G. Russmüller, J. Stampfl, R. Liska:
"Biomaterials based on low cytotoxicity vinyl esters for bone replacement application";
Poster: 4. Wiener Biomaterialsymposium: Von der Werkstoffentwicklung bis zur klinischen Anwendung,
TU Wien, Wien;
15.11.2010
- 17.11.2010; in: "Tagungsband",
(2010),
S. 57.
B. Husar, M. Schwentenwein, C. Heller, F. Varga, G. Russmüller, J. Stampfl, R. Liska:
"Vinyl carbonates as low cytotoxicity monomers for fabrication of biocompatible 3d scaffolds";
Poster: European Symposium of Photopolymer Science,
Mulhouse, France;
28.11.2010
- 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book",
(2010).
R. Inführ, C. Fritscher, R. Liska, H. Lichtenegger, J. Stampfl, N. Hüsing:
"Fabrication of Bio-Inspired Ceramic Composites Using Soluble Photopolymers asMmold Materials";
Poster: Euromat 2005,
Prag;
05.09.2005
- 08.09.2005; in: "Euromat 2005 European Congress on Advanced Materials and Processes",
http://www.dgm.de/past/2005/euromat2005/programme/
(2005),
Paper-Nr. P618,
1 S.
R. Inführ, C. Fritscher, V. Schmidt, L. Kuna, R. Liska, H. Lichtenegger, J. Stampfl:
"Structuring methods capable of building 3D parts with feature resolutions from 50 µm to 100 nm";
Poster: Junior Scientist Conference 2006,
Wien;
19.04.2006
- 21.04.2006; in: "Junior Scientist Conference 2006. Proceedings",
(2006),
ISBN: 3-902463-05-8;
S. 131
- 132.
R. Inführ, H. Lichtenegger, C. Fritscher, J. Stampfl, R. Liska:
"3D Lithography of organo-soluble mold materials";
Poster: 7th Austrian Polymer Meeting,
Graz, Austria;
04.07.2005
- 06.07.2005; in: "7th Austrian Polymer Meeting - Final Program",
(2005),
S. 67.
R. Inführ, H. Lichtenegger, J. Stampfl, R. Liska, C. Fritscher, N. Hüsing:
"3D Microstereolithography of soluble mold materials";
Vortrag: 31st International Conference on Micro- and Nano-Engineering 2005,
Vienna;
19.09.2005
- 22.09.2005; in: "31st International Conference on Micro- and Nano-Engineering 2005 - Abstracts",
(2005),
S. 9D_04.
R. Inführ, R. Liska, H. Lichtenegger, C. Fritscher, J. Stampfl, N. Hüsing:
"3D Lithography of Organo-Soluble Mold Materials for Sol-Gel Nanocomposites";
Poster: Radtech Europe 2005: Exhibition and Conference,
Barcelona;
18.10.2005
- 20.10.2005; in: "RadTech Europe 2005 Conference Proceedings Volume II",
Radtech Europe Association,
(2005),
ISBN: 3-87870-330-9;
S. 487
- 492.
R. Inführ, N. Pucher, C. Heller, H. Lichtenegger, V. Schmidt, V. Satzinger, L. Kuna, A. Haase, J. Stampfl, R. Liska:
"Refractive Index Patterning of Polymeric Waveguide Materials";
Poster: RadTech Europe 2007 - Europe´s event for UV/EB curing, Vienna 13-15 Nov 2007,
Wien;
13.11.2007
- 15.11.2007; in: "RadTech Europe 2007 - Conference Proceedings",
(2007),
7 S.
R. Inführ, N.U Pucher, H. Lichtenegger, R. Liska, V. Schmidt, V. Satzinger, N. Galler, K. Stadlmann, J. Stampfl:
"Refractive Index Patterning of Flexible Waveguide Materials by Means of Two‑Photon 3D Lithography";
Poster: Viennano'09 - 3rd Vienna International Conference Nano-Technology,
Vienna;
18.03.2009
- 20.03.2009; in: "Nano-Technology",
W.J. Bartz (Hrg.);
(2009),
ISBN: 978-3-901657-32-0;
S. 503
- 508.
R. Inführ, J. Stampfl, S. Krivec, R. Liska, H. Lichtenegger, V. Satzinger, V. Schmidt, N. Matsko, W. Grogger:
"3D-structuring of optical waveguides with two photon polymerization";
Vortrag: 2009 MRS Spring Meeting,
San Francisco, USA;
14.04.2009
- 17.04.2009; in: "Material Systems and Processes for Three-Dimensional Micro- and Nanoscale Fabrication and Lithography",
S. Kuebler, V. Milam (Hrg.);
1179E
(2009),
Paper-Nr. 1179-BB01-07,
7 S.
S. Jauk, R. Liska:
"New Derivatives of Covalently linked Benzophenone-Amine based Photoinitiato";
Poster: RadTech Europe 2007,
Vienna, A;
13.11.2007
- 15.11.2007; in: "RadTech Europe 2007 Conference Proceedings",
(2007),
7 S.
S. Jauk, G. Ullrich, P. Burtscher, N. Moszner, R. Liska:
"New Concepts for Type II Photoinitiators";
Vortrag: 7th Austrian Polymer Meeting,
Graz, Österreich;
04.07.2005
- 06.07.2005; in: "7th Austrian Polymer Meeting - Final Program",
(2005),
S. 41.
F. Karasu, D. Balta, R. Liska, N. Arsu:
"Photoinitiated polymerization of β-Cyclodextrin/ Methyl Methacrylate Host / Guest complex in the Presence of Water Soluble Photoinitiator";
Poster: 9th Austrian Polymer Meeting,
Graz, A;
26.03.2008
- 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts",
(2008),
S. 103.
F. Karasu, C. Dworak, S. Kopeinig, E. Hummer-Koppendorfer, N. Arsu, R. Liska:
"Photoinitiating Monomers based on Diacrylamides";
Poster: 9th Austrian Polymer Meeting,
Graz, A;
26.03.2008
- 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts",
(2008),
S. 107.
M. Kellner, F. Radovanovic, J. Matovic, R. Liska:
"High Performance Proton Conducting Membranes for Fuel Cells made by Photopolymerization of Hydrolytically Stable Monomers";
Vortrag: Physical Chemistry 2012,
Belgrade, Serbia;
24.09.2012
- 28.09.2012; in: "Proceedings",
(2012),
S. 492
- 494.
M. Kellner, P. Radovanovic, R. Liska, J. Matovic:
"Novel Crosslinker for Photopolymerization of Proton Conducting Fuel Cell Membranes";
Vortrag: 9th International Conference on Multi-Material Micro Manufacture - 4M 2012,
Wien;
09.10.2012
- 11.10.2012; in: "Proceedings of the 9th International Conference on Multi-Material Micro Manufacture",
(2012),
ISBN: 978-981-07-3353-7;
S. 148.
M. Kellner, P. Radovanovic, J. Matovic, R. Liska:
"Novel crosslinkers for high performance poly-AMPS-based proton exchange membranes for fuel cells";
Vortrag: European Symposium of Photopolymer Science - ESPS 2012,
Torino;
04.09.2012
- 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts",
(2012).
M. Kellner, P. Radovanovic, J. Matovic, R. Liska:
"Photopolymerization of crosslinked proton conducting membranes";
Poster: RadTech Europe 2011,
Basel, CH;
18.10.2011
- 20.10.2011; in: "RadTech Europe 2011 - Abstract Book",
(2011),
S. 123.
M. Kellner, P. Radovanovic, J. Matovic, R. Liska:
"Proton conducting biomimetic membranes based on sulfonic polymeres";
Poster: 10th Austrian Polymer Meeting and 2nd Joint Austrian-Slovenian Polymer Meeting 2010,
Leoben;
08.09.2010
- 10.09.2010; in: "Book of Abstracts",
(2010),
S. 120
- 121.
M. Kellner, P. Radovanovic, J. Matovic, R. Liska:
"Proton conducting fluorinated polymer nanomembrane for fuel cell applications";
Poster: European Symposium of Photopolymer Science - ESPS 2012,
Torino;
04.09.2012
- 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts",
(2012),
S. 21.
M. Kellner, P. Radovanovic, J. Matovic, R. Liska:
"Proton conducting membranes based on photopolymerizable monomers";
Poster: ICOM 2011 - International Congress on Membranes and Membrane Processes,
Amsterdam, Niederlande;
23.07.2011
- 29.07.2011; in: "ICOM 2011",
(2011),
S. 667.
M. Kellner, Ph Radovanovic, J. Matovic, R. Liska:
"Photopolymerisation of proton conducting biomimetic membranes";
Poster: European Symposium of Photopolymer Science,
Mulhouse, F;
28.11.2010
- 01.12.2010; in: "European Symposium of Photopolymer Science",
(2010).
M. Kellner, Ph Radovanovic, J. Matovic, R. Liska:
"Photopolymerizable Monomer Formulations for Nanoporous Proton Conducting Membranes";
Poster: 4M 2011 - 8th International Conference on Multi-Material Micro Manufacture,
Stuttgart, D;
08.11.2011
- 10.11.2011; in: "4M 2011 - Proceedings of the 8th International Conference on Multi-Material Micro Manufacture",
Research Publishing,
(2011),
ISBN: 978-981-07-0319-6;
S. 242
- 244.
N. Klikovits, P. Knaack, D. Bomze, I. Krossing, R. Liska:
"Novel Alkoxyaluminate-based Cationic Photoinitiators";
Poster: RadTech Europe Conference & Exhibition 2017,
Prag;
17.10.2017
- 19.10.2017; in: "RadTech Europe Conference & Exhibition 2017",
(2017),
S. 89.
N. Klikovits, P. Knaack, D. Bomze, I. Krossing, R. Liska:
"Novel photoacid generator for cationic photopolymerization";
Vortrag: Danube Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017",
Book of Abstracts.com,
(2017),
ISBN: 978-3-9504017-6-9;
S. OP-87.
N. Klikovits, P. Knaack, R. Liska:
"Novel photopolymers by UV-induced Cationic Ring Opening Polymerization";
Vortrag: RadTech Europe 2019,
München, Deutschland;
15.10.2019
- 16.10.2019; in: "RadTech Europe 2019",
(2019),
S. 51.
N. Klikovits, A.D. Tran, P. Knaack, R. Liska:
"Advances in cationic photopolymerization based on alkoxyaluminate photoacid generators";
Poster: 5th European Symposium of Photopolymer Science,
Mulhouse, France;
03.09.2018
- 06.09.2018; in: "5th European Symposium of Photopolymer Science",
5th European Symposium of Photopolymer Science,
(2018),
S. PO16.
P. Knaack, D. Bomze, P. Gauss, M. Mitterbauer, R. Liska:
"Latest Photoinitiator Developments";
Vortrag: 12th European Coatings Show 2019,
Nürnberg;
19.04.2019
- 21.04.2019; in: "European Coatings Show Journal 2019",
European Coatings Journal 2019,
03
(2019),
S. 90.
P. Knaack, D. Bomze, W. Kern, R. Liska:
"Radical Induced Cationic Frontal Polymerization of Epoxy Resins";
Vortrag: Danube Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017",
Book of Abstracts.com,
(2017),
ISBN: 978-3-9504017-6-9;
S. OP-86.
P. Knaack, D. Bomze, N. Klikovits, I. Krossing, R. Liska:
"New cationic Initiators and Frontal Polymerization";
Vortrag: RadTech Europe Conference & Exhibition 2017,
Prag;
17.10.2017
- 19.10.2017; in: "RadTech Europe Conference & Exhibition 2017",
(2017),
S. 41.
P. Knaack, D. Bomze, I. Krossing, R. Liska:
"Advances in Cationic Photopolymerization";
Vortrag: 4th European Symposium of Photopolymer Science,
Leipzig;
11.09.2016
- 14.09.2016; in: "ESPS 2016",
(2016),
S. O-9.
P. Knaack, D. Bomze, I. Krossing, R. Liska:
"New photoacid generator for cationic photopolymerisation";
Vortrag: RadTech Europe 2015 Conference,
Prague;
13.10.2015
- 15.10.2015; in: "Abstract Book",
(2015),
S. 63.
P. Knaack, D. Bomze, I. Krossing, R. Liska:
"Novel Initiator For Photoinduced Cationic Polymerisation";
Poster: Photopolymerization Fundamentals 2015,
Boulder;
13.09.2015
- 16.09.2015; in: "Abstract USB",
(2015).
P. Knaack, D. Bomze, I. Krossing, R. Liska:
"Progress in Cationic Photopolymerization";
Vortrag: European Coatings Show and Conference 2017,
Nürnberg;
02.04.2017
- 06.04.2017; in: "European Coatings Journal 04-2017",
Vincentz Network GmbH & Co. KG, Hannover (Deutschland),
04/2017
(2017),
ISSN: 0930-3847;
S. 102.
P. Knaack, R. Taschner, R. Liska:
"Cationic Frontalpolymerization";
Vortrag: Polymer Meeting 14,
Graz;
30.08.2021
- 02.09.2021; in: "Polymer Meeting 14 Book of Abstracts",
Verlag der Technischen Universität Graz,
(2021),
ISBN: 978-3-85125-844-8;
S. 26.
P. Knaack, R. Taschner, A.D. Tran, R. Liska:
"Frontal Polymerization An ongoing trend in cationic polymerization";
Vortrag: The 6th (virtual) European Symposium of Photopolymer Science,
Wien (eingeladen);
15.06.2021
- 17.06.2021; in: "vESPS 2021",
(2021),
ISBN: 978-3-9504809-3-1;
S. 81.
P. Knaack, A.D. Tran, N. Klikovits, R. Liska:
"Frontal polymerization";
Poster: 5th European Symposium of Photopolymer Science,
Mulhouse, France;
03.09.2018
- 06.09.2018; in: "5th European Symposium of Photopolymer Science",
5th European Symposium of Photopolymer Science,
(2018),
S. P17.
T. Koch, F. R. Kogler, R. Potzmann, U. Schubert, S. Krivec, R. Liska, H. Lichtenegger, S. Seidler:
"Charakterisierung des mechanischen Verhaltens von organisch-anorganischen Hybridwerkstoffen mittels Eindruckprüfungen";
Vortrag: 13. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Halle-Merseburg;
29.06.2011
- 01.07.2011; in: "13. Problemseminar Deformation und Bruchverhalten von Kunststoffen",
(2011),
5 S.
D. Kojic, Y. Mete, P. Knaack, K. Ehrmann, J. Stampfl, R. Liska:
"Expanding Spirocyclic Monomers For Hot Lithography Technology";
Poster: The 6th (virtual) European Symposium of Photopolymer Science,
Wien;
15.06.2021
- 17.06.2021; in: "vESPS 2021",
(2021),
ISBN: 978-3-9504809-3-1;
S. 189.
S. Kopeinig, H. Gruber, E. Hummer-Koppendorfer, R. Liska:
"New Monomers for radiation curable formulations";
Poster: RadTech Europe 2007,
Vienna, A;
13.11.2007
- 15.11.2007; in: "RadTech Europe 2007 Conference Proceedings",
(2007),
7 S.
S. Kopeinig, H. Gruber, E. Hummer-Koppendorfer, R. Liska:
"Photopolymerization of Silicone Acrylamides and Acrylates";
Poster: RadTech Europe 2007,
Vienna, A;
13.11.2007
- 15.11.2007; in: "RadTech Europe 2007 Conference Proceedings",
(2007),
7 S.
S. Kopeinig, R. Liska:
"Benzophenone as covalently bound sensitizer for α-cleavable Photoinitiatiators";
Poster: 7th Austrian Polymer Meeting,
Graz, Österreich;
04.07.2005
- 06.07.2005; in: "7th Austrian Polymer Meeting - Final Program",
(2005),
S. 70.
P. Krajnc, M. Susec, I. Pulko, R. Liska:
"Towards biocompatible and biodegradable polyHIPEs";
Poster: EUPOC 2011,
Gargnano;
29.05.2011
- 03.06.2011; in: "Biobased polymers and related biomaterials : abstract booklet",
(2011).
S. Krivec, R. Liska, H. Lichtenegger:
"Sol-Gel Materials as Carrier for Polymeric Waveguides";
Poster: 9th Austrian Polymer Meeting,
Graz, A;
26.03.2008
- 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts",
(2008),
S. 83.
J. Kumpfmüller, R. Liska:
"Structuring of polysiloxane-based waveguides via two-photon induced polymerization";
Poster: Junior Scientist Conference 2010,
Vienna;
07.04.2010
- 09.04.2010; in: "Proceedings",
(2010),
ISBN: 978-3-200-01797-9;
S. 245
- 246.
J. Kumpfmüller, N.U Pucher, K. Stadlmann, J. Stampfl, R. Liska:
"Photo-induced Waveguide formation in Polysiloxanes";
Vortrag: RadTech Europe 2009,
Nizza, FR;
14.10.2009
- 15.10.2009; in: "Radtech Europe 2009, Proceedings",
(2009),
7 S.
J. Kumpfmüller, K. Stadlmann, R. Inführ, N.U Pucher, J. Stampfl, R. Liska:
"Two-Photon-Induced Waveguide Formation In Polysiloxanes";
Poster: 13. Österreichische Chemietage,
Wien;
24.08.2009
- 27.08.2009; in: "13. Österreichische Chemietage",
(2009),
ISBN: 978-3-900554-66-8;
S. 14.
J. Kumpfmüller, K. Stadlmann, Z. Li, G. Schmid, J. Stampfl, R. Liska:
"Two-photon-induced microfabrication of flexible optical waveguides";
Vortrag: The 12th International Symposium on Laser Precision Microfabrication,
Takamatsu, J;
07.06.2011
- 10.06.2011; in: "Program and Technical Digest (LPM2011)",
(2011),
S. 104.
J. Kumpfmüller, K. Stadlmann, V. Satzinger, J. Stampfl, R. Liska:
"Fabrication of flexible optical waveguides via two-photon induced thiol-ene polymerization";
Poster: RadTech Europe 2011,
Basel, CH;
18.10.2011
- 20.10.2011; in: "RadTech Europe 2011 - Abstract Book",
(2011),
S. 124.
M. Kury, C. Gorsche, K. Seidler, P. Gauss, T. Koch, R. Liska:
"Addition-fragmentation chain transfer reagents in photopolymerisation of methacrylic monomers";
Vortrag: 6th Bratislava Young Polymer Scientists Workshop,
High Tatras, Slovakia;
14.03.2016
- 18.03.2016; in: "BYPoS Workshop book",
book of abstracts,
(2016),
ISBN: 978-80-970923-8-2;
S. 95.
M. Kury, T. Koch, C. Gorsche, R. Liska:
"Investigation of diacrylate-based cyclopolymerizable monomers in photopolymerization";
Poster: 5th European Symposium of Photopolymer Science,
Mulhouse, France;
03.09.2018
- 06.09.2018; in: "5th ESPS 2018",
5th European Symposium of Photopolymer Science,
(2018),
S. P19.
M. Kury, G. Peer, K. Seidler, C. Gorsche, P. Gauss, T. Koch, P. Dorfinger, J. Stampfl, R. Liska:
"Toughening photoploymers by means of addition-fragmentation chain transfer reagents for 3D printing";
Poster: European Polymer Congress 2019 (EPF 2019),
Crete, Greece;
09.06.2019
- 14.06.2019; in: "European Polymer Congress 2019 (EPF 2019)",
(2019),
S. 762.
M. Kury, K. Seidler, P. Dorfinger, T. Koch, J. Stampfl, C. Gorsche, R. Liska:
"Toughening of photopolymer Networks using Addition-fragmentation chain transfer Reagents";
Vortrag: RadTech Europe Conference & Exhibition 2017,
Prag;
17.10.2017
- 19.10.2017; in: "Rad Tech Europe Conference & Exhibition 2017",
(2017),
S. 13.
M. Kury, K. Seidler, P. Gauss, P. Dorfinger, T. Koch, J. Stampfl, C. Gorsche, R. Liska:
"Modification of (Meth)Acrylate-Based Photopolymer Networks Using Addition-Fragmentation Chain Transfer Reagents";
Vortrag: Danube Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017",
Book of Abstracts.com,
(2017),
ISBN: 978-3-9504017-6-9;
S. OP-90.
M. Kury, K. Seidler, A. Svirkova, M. Marchetti-Deschmann, T. Koch, C. Gorsche, R. Liska:
"Addition-Fragmentation Chain Transfer Reagents in Photopolymerization of Acrylates";
Poster: 4th European Symposium of Photopolymer Science,
Leipzig;
11.09.2016
- 14.09.2016; in: "ESPS 2016",
(2016),
S. P-57.
I. Lamparth, U. Fischer, J. Radebner, M. Haas, M. Mitterbauer, R. Liska, H. Stüger, N. Moszner:
"Photoinitiating Efficiency of Visible Light Initiators Based on Tetraacyl Derivatives of Germanium and Tin";
Hauptvortrag: 5th European Symposium of Photopolymer Science,
Mulhouse, France;
03.09.2018
- 06.09.2018; in: "5th European Symposium of Photopolymer Science",
5th European Symposium of Photopolymer Science,
(2018),
S. PO21.
Z. Li, K. Cicha, A. Ajami, A. Rosspeintner, S. Naumov, T. Scherzer, J. Stampfl, R. Liska:
"A facial preparation and structure property relationship of novel photoinitiators for two -photon photopolymerization";
Vortrag: 4th Bratislava Young Polymer Scientists workshop,
Bratislava;
01.10.2012
- 05.10.2012; in: "4th Bratislava Young Polymer Scientists workshop",
(2012),
ISBN: 978-80-970923-2-0;
S. 83.
Z. Li, K. Cicha, A. Ajami, A. Rosspeintner, S. Naumov, T. Scherzer, J. Stampfl, R. Liska:
"A Straightforward Synthesis and Structure-Property Relationship of Highly Efficient Two-photon Photoinitiators for 3D microfabrication";
Poster: European Symposium of Photopolymer Science - ESPS 2012,
Torino;
04.09.2012
- 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts",
(2012),
S. 24.
Z. Li, A. Ovsianikov, J. Torgersen, J. Stampfl, R. Liska:
"3D site-specific functionalization of matrices via multi-photon grafting and subsequent click reaction";
Poster: International Symposium on NanoPhotonics 2012,
Beijing;
12.02.2012
- 14.02.2012; in: "International Symposium on NanoPhotonics 2012",
(2012).
Z. Li, X.H. Qin, A. Ovsianikov, J. Torgersen, A. Ajami, W. Husinsky, S. Mühleder, W. Holnthoner, J. Stampfl, R. Liska:
"Novel water soluble two-photon initiators for 3D scaffold microfabrication";
Vortrag: 5th Biomaterialsymposium,
Vienna;
19.11.2012
- 21.11.2012; in: "5th Vienna Biomaterialsymposium 19.11.-21.11.2012",
J. Stampfl (Hrg.);
(2012),
S. 95.
Z. Li, X.H. Qin, A. Ovsianikov, J. Torgersen, A. Ajami, W. Husinsky, S. Mühleder, W. Holnthoner, J. Stampfl, R. Liska:
"Water Soluble Initiators for Two-photon Polymerization";
Poster: The 3rd TERMIS World Congress 2012,
Vienna;
05.09.2012
- 08.09.2012; in: "Journal of Tissue Engineering and Regenerative Medicine 2012",
John Wiley & Sons, Ltd.,
6/Supplement s1
(2012),
ISSN: 1932-7005;
S. 369.
Z. Li, X.H. Qin, A. Ovsianikov, J. Torgersen, A. Ajami, J. Stampfl, R. Liska:
"3D site-specific functionalization of matrices via multi-photon grafting and subsequent click reaction";
Poster: European Symposium of Photopolymer Science - ESPS 2012,
Torino;
04.09.2012
- 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts",
(2012),
S. 25.
Z. Li, X.H. Qin, A. Ovsianikov, J. Torgersen, S. Mühleder, W. Holnthoner, A. Ajami, W. Husinsky, J. Stampfl, R. Liska:
"Water Soluble Initiators for Two-photon Polymerization";
Poster: European Symposium of Photopolymer Science - ESPS 2012,
Torino;
04.09.2012
- 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts",
(2012),
S. 26.
Z. Li, M. Siklos, K. Cicha, A. Ajami, W. Husinsky, J. Stampfl, R. Liska:
"C4-303 Synthesis and Structure-Activity Relationship of Several Novel Two-Photon Initiators based on a D-pi-A-pi-D Chromophor";
Poster: Materials science and engineering MSE 2010,
Darmstadt;
24.08.2010
- 26.08.2010; in: "Tagungsband Material science and engineering 2010",
(2010),
S. 40.
Z. Li, M. Siklos, N.U Pucher, K. Cicha, A. Ajami, W. Husinsky, A. Rosspeintner, E. Vauthey, G. Gescheidt, J. Stampfl, R. Liska:
"Several novel aromatic ketone-based initiators for two-photon polymerization";
Poster: RadTech Europe 2011,
Basel, CH;
18.10.2011
- 20.10.2011; in: "RadTech Europe 2011 - Abstract Book",
(2011),
S. 126.
H. Lichtenegger, C. Fritscher, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"3D-Templating of hierarchical ceramics";
Vortrag: MRS Spring Meeting 2004,
San Francisco, USA;
12.04.2004
- 16.04.2004; in: "MRS Spring Meeting 2004, Abstracts",
MRS,
(2004),
S. 368.
S. Ligon, S. Baudis, F. Nehl, A. Mautner, B. Husar, M. Schwentenwein, A. Wilke, J. Stampfl, G. Russmüller, R. Liska:
"Biocompatible monomers for photo-based additive manufacturing technologies";
Poster: Materials Science and Engineering 2012,
Darmstadt;
25.09.2012
- 27.09.2012; in: "MSE Programme",
(2012),
S. 62.
S. Ligon, S. Baudis, K. Seidler, C. Grasl, H. Schima, H. Bergmeister, R. Liska:
"Mechanically flexible and controllably degradable electrospun thermoplastic polyurethanes for vascular prostheses";
Vortrag: E-MRS 2012 FALL MEETING (European Materials research Society),
Warschau;
17.09.2012
- 21.09.2012; in: "E-Mrs 2012 Fall Meeting",
(2012).
S. Ligon, S. Baudis, K. Seidler, C. Grasl, H. Schima, H. Bergmeister, G. Weigel, D. Bernhard, R. Liska:
"Assessment of Aliphatic Thermoplastic Polyurethanes for Narrow Diameter Vascular Grafts";
Vortrag: 4th Joint ESAO IFAO Congress,
Porto, P;
09.10.2011
- 12.10.2011; in: "The International Journal of Artificial Organs",
Wichtig Editore,
Milano
(2011),
ISSN: 0391-3988;
S. 645.
S. Ligon, C. Dworak, S. Baudis, F. Nehl, H. Wilhelm, H. Bergmeister, D. Bernhard, J. Stampfl, R. Liska:
"Tailor-made Biomaterials for Vascular Tissue Regeneration printed by Additive Manufacturing Technologies";
Poster: Frontiers in Biomedical Polymers 2011,
Funchal, P;
09.05.2011
- 12.05.2011; in: "Ninth International Symposium on Frontiers in Biomedical Polymers",
(2011),
S. 87
- 88.
S. Ligon, C. Dworak, T. Koch, F. Varga, R. Liska:
"Photopolymerizable biocompatible polymers based on phosphorous containing vinyl esters and vinyl carbamates";
Poster: Frontiers in Biomedical Polymers 2011,
Funchal, P;
09.05.2011
- 12.05.2011; in: "Ninth International Symposium on Frontiers in Biomedical Polymers",
(2011),
S. 63.
S. Ligon, C. Heller, M. Schwentenwein, J. Stampfl, F. Varga, G. Russmüller, R. Liska:
"Rapid Prototyping of Bioabsorbalbe Polyvinylesters for Tissue Engineering";
Poster: ESAO - ASAIO Winter School 2011,
Semmering;
26.01.2011
- 29.01.2011; in: "ESAO-ASAIO Winter School",
(2011),
S. 51.
S. Ligon, B. Husar, S. Baudis, K. Seidler, G. Weigel, C. Grasl, H. Bergmeister, R. Liska:
"Ester based thermoplastic polyurethanes for electrospun vascular prostheses";
Poster: The 3rd TERMIS World Congress 2012,
Vienna;
05.09.2012
- 08.09.2012; in: "Journal of Tissue Engineering and Regenerative Medicine 2012",
John Wiley & Sons, Ltd.,
6/Supplement s1/
(2012),
ISSN: 1932-7005;
S. 146.
S. Ligon, B. Husar, A. Mautner, C. Heller, M. Schwentenwein, A. Wilke, G. Russmüller, J. Stampfl, R. Liska:
"Biocompatible monomers for photo-based additive manufacturing technologies";
Poster: MSE 2012 Darmstadt,
Darmstadt, Germany;
25.09.2012
- 27.09.2012; in: "MSE 2012 Darmstadt",
(2012),
S. 380.
S. Ligon, B. Husar, H. Wutzel, H. Hoffmann, J. Torgersen, R. Liska:
"An overview of anti-oxygen inhibition strategies for LED-based wood coatings";
Vortrag: RadTech Asia 2013,
Shanghai;
20.05.2013
- 24.05.2013; in: "Guide Book",
(2013).
S. Ligon, B. Husar, H. Wutzel, H. Hoffmann, J. Torgersen, R. Liska:
"Assessing anti-oxygen inhibition strategies for LED-based wood coatings by FTIR";
Vortrag: European Symposium of Photopolymer Science - ESPS 2012,
Torino;
04.09.2012
- 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts",
(2012).
S. Ligon, B. Husar, H. Wutzel, J. Torgersen, R. Liska:
"Developing anti-oxygen inhibition strategies for LED-based wood coatings";
Poster: RadTech Europe 2013,
Basel;
15.10.2013
- 17.10.2013; in: "Abstract Book",
(2013),
S. 118.
S. Ligon, M. Kellner, P. Radovanovic, J. Matovic, R. Liska:
"Photocurable Poly-AMPS-Based Proton Exchange Membranes For Fuel Cells";
Vortrag: RadTech Europe 2013,
Basel;
15.10.2013
- 17.10.2013; in: "Abstract Book",
(2013),
S. 88.
S. Ligon, J. Kumpfmüller, Z. Li, K. Stadlmann, K. Cicha, A. Ovsianikov, A. Ajami, W. Husinsky, A. Rosspeintner, J. Stampfl, R. Liska:
"Real 3D writing by two photon induced polymerization";
Vortrag: RadTech Europe 2011,
Basel, CH;
18.10.2011
- 20.10.2011; in: "RadTech Europe 2011 - Abstract Book",
(2011),
S. 78.
K. Lisak, R. Liska, S. Knaus, J. Wendrinsky:
"Photochemical Surface Modification of Polyfines";
Poster: XIXth IUPAC Symposium on Photochemistry,
Budapest, Hungary;
14.07.2002
- 19.07.2002; in: "XIXth IUPAC Symposium on Photochemistry Book of Abstracts",
(2002),
ISBN: 9639319228;
S. 311.
K. Lisak, R. Liska, S. Knaus, J. Wendrinsky:
"Photochemical Surface Modification of Polypropylene";
Vortrag: 10th"Tihany" Symposium on Radiation Chemistry,
Sopron, Hungary;
31.08.2002
- 05.09.2002; in: "10th"Tihani" Symposium on Radiation Chemistry - Program and Abstracts",
(2002).
A. Liska, H. Wölfle, R. Liska, S. Knaus:
"Photopolymerization of Maleimide-1,3-Diketones";
Poster: RadTech Europe 2003,
Berlin, Germany;
03.11.2003
- 05.11.2003; in: "RadTech Europe 2003 Conference Proceedings",
(2003),
ISBN: 3-87870-152-7;
S. 939
- 944.
R. Liska:
"3D Photopolymerization";
Hauptvortrag: 10th Austrian Polymer Meeting and 2nd Joint Austrian-Slovenian Polymer Meeting 2010,
Leoben (eingeladen);
08.09.2010
- 10.09.2010; in: "Book of Abstracts",
(2010),
S. 28.
R. Liska:
"Advanced Applications of Photopolymerization: 3D Printing of Biomaterials";
Vortrag: 24. Lecture Conference on Photochemistry,
Köln (eingeladen);
29.09.2014
- 01.10.2014; in: "24. Lecture Conference of Photochemistry",
(2014),
S. 50.
R. Liska:
"Advanced Applications of Storage Stable Thiol-Ene Formulations";
Vortrag: Photopolymerization Fundamentals 2013,
Jackson Hole;
22.09.2013
- 25.09.2013; in: "Book of Abstracts",
(2013).
R. Liska:
"Advanced photoinitiators for coatings, biomaterials and 3D printing";
Vortrag: 5th European Symposium of Photopolymer Science,
Mulhouse, France (eingeladen);
03.09.2018
- 06.09.2018; in: "5th European Symposium of Photopolymer Science",
5th European Symposium of Photopolymer Science,
(2018),
S. 9.
R. Liska:
"Advanced techniques for Photocuring of Hydrogels";
Vortrag: 4th European Symposium of Photopolymer Science,
Leipzig (eingeladen);
11.09.2016
- 14.09.2016; in: "ESPS 2016",
(2016),
S. IL-3.
R. Liska:
"Dramatic Enhancement in Sensitizers Effects for Free Radical Photoinitiators";
Poster: RadTech Europe 2003,
Berlin, Germany;
03.11.2003
- 05.11.2003; in: "RadTech Europe 2003 Conference Proceedings",
(2003),
ISBN: 3-87870-152-7;
S. 947
- 952.
R. Liska:
"Photopolymerization and additive manufacturing technologies";
Hauptvortrag: 4th Bratislava Young Polymer Scientists workshop,
Bratislava (eingeladen);
01.10.2012
- 05.10.2012; in: "4th Bratislava Young Polymer Scientists workshop",
(2012),
ISBN: 978-80-970923-2-0;
S. 25.
R. Liska:
"Photopolymerization goes 3D";
Vortrag: European Symposium of Photopolymer Science,
Mulhouse, France (eingeladen);
28.11.2010
- 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book",
(2010),
S. 13.
R. Liska:
"Photopolymerization in Biomedical Applications";
Vortrag: 4. Wiener Biomaterialsymposium: Von der Werkstoffentwicklung bis zur klinischen Anwendung,
TU Wien, Wien (eingeladen);
15.11.2010
- 17.11.2010; in: "Tagungsband",
(2010),
S. 53.
R. Liska:
"Thiol-ene polymerization of biocompatible monomers in additive manufactoring technology";
Hauptvortrag: Austrian - Slovenian Polymer Meeting - ASPM 2013,
Bled (eingeladen);
03.04.2013
- 05.04.2013; in: "The Proceedings of the Austrian - Slovenian Polymer Meeting - ASPM 2013",
M. Zigon, T. Rajsp (Hrg.);
(2013),
ISBN: 978-961-269-992-5;
S. 7
- 8.
R. Liska:
"Thiol-ene polymerization of biocompatible photopolymers";
Hauptvortrag: European Symposium of Photopolymer Science - ESPS 2012,
Torino (eingeladen);
04.09.2012
- 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts",
(2012).
R. Liska, H. Bergmeister, S. Baudis, C. Dworak, C. Heller, N. Moszner, M. Porodec, N.U Pucher, G. Russmüller, V. Schmidt, M. Schulz-Siegmund, M. Schwentenwein, J. Stampfl, F. Varga, G. Weigel:
"Monomers and Photoinitiators for Biomedical Applications";
Vortrag: RadTech Europe 2009,
Nizza, FR;
14.10.2009
- 15.10.2009; in: "Radtech Europe 2009, Proceedings",
(2009),
8 S.
R. Liska, N. Fuß, D. Herzog, B. Seidl, G. Grabner:
"New chromophores for photoinitiators";
Vortrag: 6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium,
Vienna, Austria;
15.09.2003
- 17.09.2003; in: "6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium ",
(2003),
S. 90.
R. Liska, B. Ganster, M. Höfer, C. Heller, S. Kopeinig, E. Hummer-Koppendorfer, N. Moszner:
"Photoinitiators with bathochromic shift";
Vortrag: RadTech Europe 2007,
Vienna, A (eingeladen);
13.11.2007
- 15.11.2007; in: "RadTech Europe 2007 Conference Proceedings",
(2007),
7 S.
R. Liska, C. Gorsche, A. Gugg, J. Stampfl, N. Moszner:
"Future Perspectives of photopolymerization";
Vortrag: 5th Biomaterialsymposium,
Vienna;
19.11.2012
- 21.11.2012; in: "Abstracts",
J. Stampfl (Hrg.);
(2012),
S. 129.
R. Liska, C. Heller, S. Baudis, M. Schuster, C. Turecek, H. Bergmeister, G. Weigel, M. Schulz, J. Stampfl, F. Varga:
"Biocompatible and biodegradable Photopolymers for Rapid Prototyping";
Vortrag: International Workshop on Biomacromolecules 2008,
Stockholm, S;
01.06.2008
- 04.06.2008; in: "International Workshop on Biomacromolecules 2008, Book of Abstracts",
(2008).
R. Liska, D. Herzog, B. Seidl, N. Fuß:
"New Chromophors for alpha-Cleavage Photoinitiators in Free Radical Polymerization";
Poster: XIXth IUPAC Symposium on Photochemistry,
Budapest, Hungary;
14.07.2002
- 19.07.2002; in: "XIXth IUPAC Symposium on Photochemistry Book of Abstracts",
(2002),
ISBN: 9639319228;
S. 312
- 313.
R. Liska, K. Kalinyaprak-Icten, B. Seidl:
"New insights into the photochemistry of cross-conjugates photoinitiators";
Poster: 7th Austrian Polymer Meeting,
Graz, Österreich;
04.07.2005
- 06.07.2005; in: "7th Austrian Polymer Meeting - Final Program",
(2005),
S. 71.
R. Liska, K. Lisak, B. Seidl, N. Fuß:
"Hydroxyalkylphenone Based Ynones as New alpha-Cleavable Photoinitiators in Free Radical Polymerization";
Poster: 10th"Tihany" Symposium on Radiation Chemistry,
Sopron, Hungary;
31.08.2002
- 05.09.2002; in: "10th"Tihani" Symposium on Radiation Chemistry - Program and Abstracts",
(2002).
R. Liska, N.U Pucher, C. Heller, M. Schwentenwein, R. Inführ, V. Satzinger, G. Gescheidt, V. Schmidt, F. Varga, J. Stampfl:
"Materials for Stereolithography of Optical and Medical Devices";
Vortrag: EPF 2009, European Polymer Congress,
Graz, A;
12.07.2009
- 17.07.2009; in: "EPF'09, Book of Abstracts",
(2009),
S. 192.
R. Liska, M. Schuster, C. Heller, S. Baudis, N.U Pucher, C. Turecek, V. Schmidt, H. Bergmeister, J. Stampfl, F. Varga, G. Weigel:
"New concepts of biocompatible and biodegradable photopolymers";
Vortrag: European Coatings Conference: "MEDICAL COATINGS AND ADHESIVES",
Berlin, D (eingeladen);
10.04.2008
- 11.04.2008; in: "European Coatings Conference: "MEDICAL COATINGS AND ADHESIVES" Proceedings",
(2008),
S. 117
- 127.
R. Liska, M. Schuster, R. Inführ, C. Turecek, F. Varga, H. Lichtenegger, J. Stampfl:
"Photopolymers for Rapid Prototyping of cellular Biomaterials";
Vortrag: 7th Austrian Polymer Meeting,
Graz, Österreich;
04.07.2005
- 06.07.2005; in: "7th Austrian Polymer Meeting - Final Program",
(2005),
S. 40.
R. Liska, F. Schwager, R. Cano Vives, J. Stampfl:
"New photopolymers for Rapid Prototyping of cellular structures";
Poster: 228th ACS National Meeting,
Philadelphia, USA;
22.08.2004
- 26.08.2004; in: "228th ACS Natinal Meeting Meeting Abstract",
(2004),
S. POLY-327.
R. Liska, F. Schwager, H. Gruber, A. Wöß, A. Pisaipan, J. Stampfl, S. Seidler:
"A new Route for the Fabrication of Biomimetic Cellular Materials";
Vortrag: RadTech Europe 2003,
Berlin, Germany;
03.11.2003
- 05.11.2003; in: "RadTech Europe 2003 Conference Proceedings",
(2003),
ISBN: 3-87870-152-7;
S. 195
- 201.
R. Liska, M. Schwentenwein, S. Baudis, S. Ligon, A. Mautner, A. Gugg, Z. Li, C. Gorsche, N.U Pucher, J. Torgersen, F. Nehl, H. Bergmeister, K. Macfelda, T. Koch, G. Russmüller, J. Stampfl:
"3D-Printing of Advanced Biomaterials by Additive Manufacturing Technologies";
Vortrag: UPAC 9th International Conference on Advanced Polymers via Macromolecular Engineering (APME 2011),
Cappadocia, TR (eingeladen);
05.09.2011
- 08.09.2011; in: "IUPAC 9th International Conference on Advanced Polymers via Macromolecular Engineering (APME 2011) - Program and Abstract Book",
(2011),
S. 101.
R. Liska, M. Schwentenwein, C. Heller, J. Stampfl, G. Russmüller:
"Low toxic monomers based on vinylesters and carbonates for additive manufacturing technology";
Vortrag: Frontiers in Biomedical Polymers 2011,
Funchal, P;
09.05.2011
- 12.05.2011; in: "Ninth International Symposium on Frontiers in Biomedical Polymers",
(2011),
S. 47.
R. Liska, M. Schwentenwein, C. Heller, J. Stampfl, G. Russmüller:
"Printing of a New Generation of Low Toxicity Polymers by Additive Manufacturing Technology for Bone Tissue Engineering";
Vortrag: 4th Joint ESAO IFAO Congress,
Porto, P;
09.10.2011
- 12.10.2011; in: "The International Journal of Artificial Organs",
Wichtig Editore,
Milano
(2011),
ISSN: 0391-3988;
S. 634.
R. Liska, B. Seidl:
"1,5-Diphenyl-1,4-diyn-3-one, a new and highly efficient Photoinitiator";
Vortrag: 228th ACS National Meeting,
Philadelphia, USA (eingeladen);
22.08.2004
- 26.08.2004; in: "228th ACS Natinal Meeting Meeting Abstract",
(2004),
S. POLY-284.
R. Liska, B. Seidl, G. Grabner:
"Laser Flash Photolysis investigations of pyridine ketones";
Poster: 228th ACS National Meeting,
Philadelphia, USA;
22.08.2004
- 26.08.2004; in: "228th ACS Natinal Meeting Meeting Abstract",
(2004),
S. POLY-326.
R. Liska, J. Stampfl:
"Hot Lithography: The Bright Fututre of Cationic Photopolymerization";
Vortrag: The 6th (virtual) European Symposium of Photopolymer Science,
Wien;
15.06.2021
- 17.06.2021; in: "vESPS 2021",
(2021),
ISBN: 978-3-9504809-3-1;
S. 51.
R. Liska, G. Ullrich, D. Herzog, P. Burtscher, N. Moszner:
"Activated camphorquinones as photoinitiators";
Poster: 228th ACS National Meeting,
Philadelphia, USA;
22.08.2004
- 26.08.2004; in: "228th ACS Natinal Meeting Meeting Abstract",
(2004),
S. POLY-323.
O. Liske, P. Dorfinger, R. Gmeiner, S. Baudis, J. Stampfl, R. Liska, S. Knaus:
"Modification of Wheat Straw Soda Lignin for Light-Induced Radical Polymerization Process";
Vortrag: Bypos Workshop 2017,
Zemplínská Sírava, Slovakia;
12.06.2017
- 16.06.2017; in: "Bypos Workshop Book 2017",
(2017),
S. 55.
O. Liske, P. Dorfinger, R. Gmeiner, S. Baudis, J. Stampfl, R. Liska, S. Knaus:
"UV curable materials for 3D printing based on renewable resources";
Vortrag: RadTech Europe Conference & Exhibition 2017,
Prag;
17.10.2017
- 19.10.2017; in: "RadTech Europe Conference & Exhibition 2017",
(2017),
S. 71.
O. Liske, P. Dorfinger, R. Gmeiner, S. Baudis, J. Stampfl, R. Liska, S. Knaus:
"UV Curable Materials from Tailored Lignin (Meth)Acrylates";
Poster: Danube Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017",
Book of Abstracts.com,
(2017),
ISBN: 978-3-9504017-6-9;
S. PO-19.
M. Lunzer, P. Gruber, K. Hölzl, M. Tromayer, M. Markovic, D. Ossipov, A. Ovsianikov, R. Liska:
"Advances in Two-Photon Initiation Based 3D Printing for Biological Applications";
Vortrag: RadTech Europe Conference & Exhibition 2017,
Prag;
17.10.2017
- 19.10.2017; in: "RadTech EuropeConference & Exhibition 2017",
(2017),
S. 40.
M. Lunzer, B. Holzer, D. Lumpi, E. Horkel, R. Liska, J. Fröhlich:
"Synthesis of Novel Cap-Linker-Cap Structures as Potential Initiators For Two-Photon-Induced Polymerization";
Poster: 15th Blue Danube Symposium on Heterocyclic Chemistry, Sept. 1-5, 2013, Olomouc, Czech Republic,
Olomouc;
01.09.2013
- 05.09.2013; in: "Book of Abstracts",
(2013),
ISBN: 978-80-263-0502-6;
S. P45.
M. Lunzer, B. Holzer, M. Tromayer, D. Lumpi, E. Horkel, R. Liska, J. Fröhlich:
"Synthesis And Characterization Of Novel Cap-Linker-Cap Type Structures As Two-Photon Absorption Photoinitiators";
Poster: 3rd European Symposium of Photopolymer Science,
Vienna;
09.09.2014
- 12.09.2014; in: "3rd European Symposium of Photopolymer Science - Abstract Book",
(2014),
ISBN: 978-3-9502992-9-8;
S. PO-55.
M. Lunzer, D. Ossipov, P. Gruber, K. Hölzl, M. Markovic, A. Ovsianikov, R. Liska:
"Micropatterning of Hydrogels by Sensitized Two-Photon Cleavage of o-Nitrobenzyl Crosslinkages";
Vortrag: Danube Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017",
Book of Abstracts.com,
(2017),
ISBN: 978-3-9504017-6-9;
S. OP-33.
M. Lunzer, D. Ossipov, J. Hilborn, P. Gruber, K. Hölzl, M. Markovic, J. Stampfl, R. Liska, A. Ovsianikov:
"Two-photon degradation of a hyaluronic acid based hydrogel using a two-photon initiator as photosensitizer";
Vortrag: 10th World Biomaterials Congress,
Montreal, Canada;
17.05.2016
- 22.05.2016; in: "Front. Bioeng. Biotechnol. Conference Abstract: 10th World Biomaterials Congress.",
Conference Abstract: 10th World Biomaterials Congress/Frontiers,
(2016).
M. Lunzer, D. Ossipov, J. Hilborn, P. Gruber, K. Hölzl, M. Markovic, M. Tromayer, J. Stampfl, R. Liska, A. Ovsianikov:
"Promoted two-photon induced cleavage of o-nitrobenzyl linkages in a hyaluronic acid based hydrogel by a two-photon initiator";
Vortrag: TERMIS-EU 2016 conference,
Uppsala, Sweden;
28.06.2016
- 01.07.2016; in: "TERMIS-EU 2016 Conference",
European Cells&Materials Journal,
Vol. 31. Suppl. 1, 2016
(2016),
ISSN: 1473-2262;
S. 42.
M. Lunzer, A. Rosspeintner, B. Holzer, D. Lumpi, M. Tromayer, P. Gruber, E. Horkel, A. Ovsianikov, E. Vauthey, R. Liska, J. Fröhlich:
"Triarylamine based Materials as Two Photon Absorption Photoinitiators - Adjustment of Molecular Properties";
Poster: RadTech Europe 2015 Conference,
Prague;
13.10.2015
- 15.10.2015; in: "Abstract Book",
(2015),
S. 84.
M. Lunzer, L. Shi, O.G. Andriotis, P. Gruber, M. Markovic, P.J. Thurner, D. Ossipov, R. Liska, A. Ovsianikov:
"Micromechanical Analysis Of Photolabile Hydrogels Micropatterned By Multiphoton Lithography";
Vortrag: 25th Congress of the European Society of Biomechanics,
Vienna;
07.07.2019
- 10.07.2019; in: "Book of Abstracts of the 25th Congress of the European Society of Biomechanics",
TU Verlag,
(2019),
ISBN: 978-3-903024-96-0;
S. 32.
M. Lunzer, L. Shi, O.G. Andriotis, P. Gruber, M. Markovic, P.J. Thurner, D. Ossipov, R. Liska, A. Ovsianikov:
"Two-Photon Micropatterning of a Photolabile Hydrogel Using a Two-Photon Sensitizer";
Poster: Symposium 'BSTE 2018: Next Generation Tissue Engineering',
Ghent, Belgien;
21.11.2018
- 23.11.2018; in: "BSTE 2018: Next Generation Tissue Engineering",
(2018),
S. PO18.
M. Lunzer, L. Shi, P. Gruber, M. Markovic, D. Ossipov, R. Liska, A. Ovsianikov:
"A Modular Approach to Sensitized Two-Photon Micropatterning of Photolabile Hydrogels";
Poster: 682. WE-Heraeus-Seminar,
Bad Honnef;
25.11.2018
- 28.11.2018; in: "Micro- and Nanostructured Biointerfaces",
(2018),
S. PO17.
M. Lunzer, L. Shi, P. Gruber, M. Markovic, D. Ossipov, R. Liska, A. Ovsianikov:
"Sensitized Two-Photon Micropatterning in Presence of Cells";
Poster: International Conference of Biofabricaton 2018,
Würzburg;
28.10.2018
- 31.10.2018; in: "International Conference of Biofabricaton 2018 Würzburg",
(2018),
S. 42.
M. Lunzer, L. Shi, P. Gruber, M. Markovic, D. Ossipov, A. Ovsianikov, R. Liska:
"Promoted two-photon micropatterning of biocompatible material";
Poster: 5th European Symposium of Photopolymer Science,
Mulhouse, France;
03.09.2018
- 06.09.2018; in: "5th European Symposium of Photopolymer Science",
5th European Symposium of Photopolymer Science,
(2018),
S. P23.
D. Mandt, P. Gruber, M. Markovic, M. Tromayer, M. Rothbauer, S. Kratz, J. Van Hoorick, P. Dubruel, S. van Vlierberghe, P. Ertl, R. Liska, A. Ovsianikov:
"3D Printed Hydrogels for microfluidici Barrier Models";
Poster: Donau Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Donau Vltava Sava Polymer Meeting 2017",
Book of Abstract,
(2017),
S. PO-20.
M. Markovic, J. Van Hoorick, K. Hölzl, M. Tromayer, S. van Vlierberghe, P. Dubruel, R. Liska, A. Ovsianikov:
"Encapsulation oh Human Adipose-Derived Stem Cells in Gelatin-Methacrylate Based Hydrogel for Tissue Engineering Applications";
Poster: Donau Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Donau Vltava Sava Polymer Meeting 2017",
M. Markovic, J. Van Hoorick, K. Hölzl, M. Tromayer, S. Van Vlierberghe, P. Dubruel, R. Liska, A. Ovsianikov (Hrg.);
Book of Abstract,
(2017),
S. PO-21.
A. Mautner, S. Ligon, B. Husar, T. Koch, J. Stampfl, R. Liska:
"Vinyl Esters With Improved Reactivity And Toughness";
Vortrag: ESPS 2014,
Vienna;
09.09.2014
- 12.09.2014; in: "3rd European Symposium of Photopolymer Science",
A. Mautner, S. Ligon, B. Husar, T. Koch, J. Stampfl, R. Liska (Hrg.);
(2014),
ISBN: 978-3-9502992-9-8;
S. 71.
A. Mautner, X.H. Qin, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"Efficient curing of vinyl esters and vinyl carbonates by thiol-ene polymerization";
Vortrag: RadTech Europe 2011,
Basel, CH;
18.10.2011
- 20.10.2011; in: "RadTech Europe 2011 - Abstract Book",
(2011).
A. Mautner, J. Stampfl, R. Liska:
"Influence of various additives onto the rheological and mechanical behavior of photopolymers";
Poster: European Symposium of Photopolymer Science,
Mulhouse, France;
28.11.2010
- 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book",
(2010).
A. Mautner, J. Stampfl, R. Liska:
"Rheological and mechanical behavior of photopolymers with different additives";
Poster: 10th Austrian Polymer Meeting and 2nd Joint Austrian-Slovenian Polymer Meeting 2010,
Leoben;
08.09.2010
- 10.09.2010; in: "Book of Abstracts",
(2010),
S. 190.
Y. Mete, D. Grunenberg, B. Steyrer, J. Stampfl, C. Gorsche, R. Liska:
"A Heterotelechelic Oligomer for Tough Photopolymersvia Hot Lithography";
Poster: 5th European Symposium of Photopolymer Science,
Mulhouse, France;
03.09.2018
- 06.09.2018; in: "5th European Symposium of Photopolymer Science",
5th European Symposium of Photopolymer Science,
(2018),
S. P26.
Y. Mete, P. Knaack, M. Schwentenwein, B. Strehmel, R. Liska:
"NIR-Initiated Photopolymerisation in Filled Systems";
Vortrag: Bypos Workshop 2017,
Zemplínská Sírava, Slovakia;
12.06.2017
- 16.06.2017; in: "Bypos Workshop Book 2017",
book of abstracts,
(2017),
S. 57.
Y. Mete, P. Knaack, M. Schwentenwein, B. Strehmel, R. Liska:
"NIR-initiated photopolymerization for lithography-based ceramic manufacturing";
Poster: Danube Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017",
Book of Abstracts.com,
(2017),
ISBN: 978-3-9504017-6-9;
S. PO-75.
Y. Mete, P. Knaack, M. Schwentenwein, B. Strehmel, R. Liska:
"NIR-initiated photopolymerization for lithography-based ceramic manufacturing";
Poster: RadTech Europe Conference & Exhibition 2017,
Prag;
17.10.2017
- 19.10.2017; in: "RadTech Europe Conference & Exhibition 2017",
(2017),
S. 88.
Y. Mete, A.D. Tran, N. Klikovits, D. Bomze, P. Knaack, R. Liska:
"Cationic Photopolymerization - Innovative Photoinitiators and their application for Bio-based Monomers and Frontal Polymerization";
Vortrag: European Polymer Congress 2019 (EPF 2019),
Crete, Greece;
09.06.2019
- 14.06.2019; in: "European Polymer Congress 2019 (EPF 2019)",
(2019),
S. 114.
Y. Mete, A.D. Tran, N. Klikovits, P. Knaack, R. Liska:
"UV-Induced Bulk Curing of Epoxy Composites";
Vortrag: RadTech Europe 2019,
München, Deutschland;
15.10.2019
- 16.10.2019; in: "RadTech Europe 2019",
(2019),
S. 11.
M. Mitterbauer, D. Bomze, N. Klikovits, A.D. Tran, P. Knaack, R. Liska:
"A novel cationic photoinitiator and its application in frontal polymerization";
Vortrag: International Symposium of Photopolymer Science 2018,
Wuxi, China;
23.04.2018
- 25.04.2018; in: "ISPS 2018",
International Symposium of Photopolymer Science,
(2018),
S. 18.
M. Mitterbauer, M. Haas, H. Stüger, N. Moszner, R. Liska:
"Visible light photoinitiators based on silicon for the curing of dental formulations";
Poster: 4th European Symposium of Photopolymer Science,
Leipzig;
11.09.2016
- 14.09.2016; in: "ESPS 2016",
(2016),
S. P-14.
M. Mitterbauer, P. Knaack, M. Haas, H. Stüger, N. Moszner, R. Liska:
"Tetrakis(2,4,6-trimethylbenzoyl)silane as photoinitiator in visible light dental curing";
Poster: Danube Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017",
Book of Abstracts.com,
(2017),
ISBN: 978-3-9504017-6-9;
S. PO-76.
M. Mitterbauer, P. Knaack, S. Naumov, M. Markovic, A. Ovsianikov, N. Moszner, R. Liska:
"A novel highly reactive Sn-based Type I photoinitiator with excellent photobleaching behavior for long wavelength curing applications";
Poster: 5th European Symposium of Photopolymer Science,
Mulhouse, France;
03.09.2018
- 06.09.2018; in: "5th European Symposium of Photopolymer Science",
5th European Symposium of Photopolymer Science,
(2018),
S. P28.
M. Mitterbauer, N. Moszner, R. Liska:
"Synthesis of novel si-based long wavelength photoinitiators for dental applications";
Vortrag: 6th Bratislava Young Polymer Scientists Workshop,
High Tatras, Slovakia;
14.03.2016
- 18.03.2016; in: "BYPoS Workshop book",
book of abstracts,
(2016),
ISBN: 978-80-970923-8-2;
S. 71.
F. Nehl, S. Baudis, H. Wilhelm, H. Bergmeister, J. Stampfl, R. Liska:
"Mechanical Characterisation of Photoelastomers for Vascular Tissue Regeneration";
Poster: European Symposium of Photopolymer Science,
Mulhouse, France;
28.11.2010
- 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book",
(2010).
F. Nehl, H. Wilhelm, H. Bergmeister, J. Stampfl, R. Liska:
"Mechanical Characteriszation of Photoelastomers for Vascular Tissue Regeneration";
Poster: ESAO - ASAIO Winter School 2011,
Semmering;
26.01.2011
- 29.01.2011; in: "ESAO-ASAIO Winter School",
(2011),
S. 56
- 57.
S. Orman, C. Gorsche, C. Hofstetter, S. Baudis, J. Stampfl, R. Liska:
"Biocompatible Photopolymers with Improved Impact Resistance for Additive Manufacturing";
Vortrag: Bypos Workshop 2017,
Zemplínská Sírava, Slovakia;
12.06.2017
- 16.06.2017; in: "Bypos Workshop Book 2017",
(2017),
S. 53.
S. Orman, C. Gorsche, C. Hofstetter, S. Baudis, J. Stampfl, R. Liska:
"Photorheometer with RT-FTIR Coupling as Innovativ Tool to Assess Photopolymers for 3D Printing";
Poster: Danube Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017",
Book of Abstracts,
(2017),
ISBN: 978-3-9504017-6-9;
S. PO 44.
S. Orman, C. Hofstetter, F. Reinauer, A. Aksu, R. Liska, S. Baudis:
"PCL based toughness enhancers for photopolymer based bone substitutes";
Vortrag: 5th European Symposium of Photopolymer Science,
Mulhouse, France;
03.09.2018
- 06.09.2018; in: "5th European Symposium of Photopolymer Science",
5th European Symposium of Photopolymer Science,
(2018),
S. 10.
S. Orman, B. Husar, M. Schwentenwein, R. Liska:
"Biocompativle photopolymer composites for potential bon replacements";
Vortrag: DVSPM 2015,
Gmunden;
11.05.2015
- 13.05.2015; in: "Proceedings of a Conference on Polymer Science",
(2015),
ISBN: 978-3-99033-491-1;
S. 22.
S. Orman, A. Mautner, S. Baudis, G. Russmüller, M. Schwentenwein, R. Liska:
"Additive Manufactured Vinyl Ester-based Photopolymers with Improved Impact Resistance";
Poster: 4th European Symposium of Photopolymer Science,
Leipzig;
11.09.2016
- 14.09.2016; in: "ESPS 2016",
(2016),
S. P-42.
S. Orman, P. Potzmann, A. Samusjew, B. Husar, M. Schwentenwein, T. Koch, J. Stampfl, R. Liska:
"Photopolymerization Of Biocompatible Composites";
Poster: Photopolymerization Fundamentals 2015,
Boulder;
13.09.2015
- 16.09.2015; in: "Abstract USB",
(2015).
S. Orman, A. Samusjew, B. Husar, T. Koch, J. Stampfl, R. Liska:
"Application Of Thiol-Ene Click Chemistry For Potential Bone Replacement Materials";
Poster: ESPS 2014,
Vienna;
09.09.2014
- 12.09.2014; in: "3rd European Symposium of Photopolymer Science",
(2014),
ISBN: 978-3-9502992-9-8;
S. 196.
A. Ovsianikov, D. Dado-Rosenfeld, S. Nürnberger, S. Levenberg, H. Redl, R. Liska, J. Stampfl:
"Laser fabrication of multi-scale elastic 3D scaffolds";
Vortrag: 3rd TERMIS World Congress,
Wien;
05.09.2012
- 08.09.2012; in: "Journal of Tissue Engineering and Regenerative Medicine",
Wiley,
(2012),
S. 366.
A. Ovsianikov, K. Haslinger, X.H. Qin, Z. Li, P. Gruber, J. Torgersen, S. Van Vlierberghe, P. Dubruel, R. Liska, J. Stampfl:
"Laser microfabrication of 3D CAD structures from photosensitive hydrogel precursors";
Vortrag: International Conference on Materials for Advanced Technologies,
Singapore;
30.06.2013
- 05.07.2013; in: "ICMAT 2013 - 7th International Conference on Materials for Advanced Technologies",
(2013),
S. 218.
A. Ovsianikov, F. Nehl, S. Baudis, B. Steyrer, R. Liska, J. Stampfl:
"Microenvironments for the Generation of Bioartificial Tissues";
Vortrag: 24th European Conference on Biomaterials,
Dublin;
04.09.2011
- 08.09.2011; in: "24th European Conference on Biomaterials",
(2011),
S. 97.
A. Ovsianikov, S. Nürnberger, J. Torgersen, Z. Li, H. Redl, R. Liska, J. Stampfl:
"Fabrication of elastic 3D scaffolds by two-photon polymerization";
Vortrag: Materials Science and Engineering 2012,
Darmstadt, Deutschland;
25.09.2012
- 27.09.2012; in: "MSE Programme",
(2012),
S. 37.
A. Ovsianikov, J. Torgersen, R. Liska, J. Stampfl:
"3D photofabrication by femtosecond laser pulses and its applications in biomedicine";
Vortrag: 4th European Conference on Applications of Femtosecond Lasers in Materials Science FemtoMat & Nano and Photonics,
Mauterndorf;
14.03.2011
- 18.03.2011; in: "4th European Conference on Applications of Femtosecond Lasers in Materials Science- Femto Mat",
(2011),
S. 4.
A. Ovsianikov, J. Torgersen, X.H. Qin, Z. Li, S Mühleder, W Holnthoner, R. Liska, J. Stampfl:
"Engineering 3D cell-culture matrices with femtosecond laserinduced photochemistry";
Hauptvortrag: 5. Wiener Biomaterialsymposium,
Wien (eingeladen);
19.11.2012
- 21.11.2012; in: "Abstracts 5th Biomaterialsymposium Vienna",
(2012),
S. 15
- 16.
A. Ovsianikov, M. Tromayer, A. Dobos, P. Gruber, M. Markovic, A. Rosspeintner, E. Vauthey, H. Redl, R. Liska:
"Micropattering of Hydrogels by Means of Multiphoton Lithography";
Vortrag: International Symposium on SSS Laser Processing (3S-LP),
Keio University, Yokohama, Japan (eingeladen);
27.02.2019
- 01.03.2019; in: "International Symposium on SSS Laser Processing",
Abstract book,
(2019).
G. Peer, A. Eibel, C. Gorsche, Y. Catel, G. Gescheidt, N. Moszner, R. Liska:
"Network regulation of dimethacrylates via ester-activated vinyl ethers";
Vortrag: RadTech Europe 2019,
München, Deutschland;
15.10.2019
- 16.10.2019; in: "Radtech Europe 2019",
(2019),
S. 68.
G. Peer, T. Koch, C. Gorsche, R. Liska:
"New monomers for photopolymerization based on radical cyclopolymerization";
Vortrag: 5th European Symposium of Photopolymer Science,
Mulhouse, France;
03.09.2018
- 06.09.2018; in: "5th European Symposium of Photopolymer Science",
5th European Symposium of Photopolymer Science,
(2018),
S. 13.
M. Porodec, C. Heller, R. Liska, J. Stampfl, M. Hacker:
"Covalent modification of photo-cross-linkable polymers for bone tissue engineering using a model protein";
Poster: International Workshop on Biomacromolecules 2008,
Stockholm, S;
01.06.2008
- 04.06.2008; in: "International Workshop on Biomacromolecules 2008, Book of Abstracts",
(2008).
M. Porodec, C. Heller, R. Liska, J. Stampfl, M. Hacker, M. Schulz-Siegmund:
"Surface Immobilization of model protein onto new photo cross-linkable materials";
Poster: 3. Wiener Biomaterialsymposium,
Wien;
19.11.2008
- 21.11.2008; in: "3. Wiener Biomaterialsymposium - Tagungsband",
(2008),
ISBN: 978-3-200-01613-2;
S. 60.
P. Potzmann, S. Baudis, C. Dworak, H. Bergmeister, H. Schima, R. Liska:
"Thermoplastic Polyurethane Elastomers";
Vortrag: 79PMM,
Prague;
28.06.2015
- 02.07.2015; in: "79th Prague Meeting on Macromolecules",
(2015),
ISBN: 978-80-85009-82-8.
P. Potzmann, F. Lopez Villanueva, R. Liska:
"Investigation Of Bubble Free, UV Initiated Frontal Polymerization In Aqueous Conditions";
Poster: Photopolymerization Fundamentals 2015,
Boulder;
13.09.2015
- 16.09.2015; in: "Abstract USB",
(2015).
P. Potzmann, F. Lopez Villanueva, R. Liska:
"UV Initiated Bubble Free Frontal Polymerization in Aqueos Conditions";
Vortrag: RadTech Europe 2015 Conference,
Prague;
13.10.2015
- 15.10.2015; in: "Abstract Book",
(2015),
S. 36.
P. Potzmann, X.H. Qin, S. Mühleder, W. Holnthoner, H. Redl, J. Stampfl, A. Ovsianikov, R. Liska:
"Development of a novel photocurable hydrogel precursor";
Poster: RadTech Europe 2013,
Basel;
15.10.2013
- 17.10.2013; in: "Abstract Book",
(2013),
S. 121.
P. Potzmann, X.H. Qin, N.U Pucher, J. Torgersen, S. Mühleder, W. Holnthoner, H. Redl, J. Stampfl, A. Ovsianikov, R. Liska:
"High-precision manufacturing of 3D hydrogel scaffolds via two-photon polymerization";
Poster: RadTech Europe 2013,
Basel;
15.10.2013
- 17.10.2013; in: "Abstract Book",
(2013),
S. 117.
P. Potzmann, X.H. Qin, N.U Pucher, J. Torgersen, S. Mühleder, W. Holnthoner, H. Redl, J. Stampfl, A. Ovsianikov, R. Liska:
"Micrometer-scale precise 3D hydrogel scaffolds prepared by two-photon polymerization";
Poster: Photopolymerization Fundamentals 2013,
Jackson Hole;
22.09.2013
- 25.09.2013; in: "Book of Abstracts",
(2013).
P. Potzmann, K. Seidler, S. Ligon, T. Koch, J. Stampfl, R. Liska:
"New building blocks for thermoplastic polyurethane elastomers for soft tissue engineering";
Poster: The 3rd TERMIS World Congress 2012,
Vienna;
05.09.2012
- 08.09.2012; in: "Journal of Tissue Engineering and Regenerative Medicine 2012",
John Wiley & Sons, Ltd.,
6/Supplement s1/
(2012),
ISSN: 1932-7005;
S. 215.
P. Potzmann, K. Seidler, S. Ligon, T. Koch, J. Stampfl, B. Messner, C. Grasl, H. Bergmeister, H. Schima, R. Liska:
"Thermoplastic polyurethane elastomers derived from new building blocks for vascular tissue engineering";
Vortrag: Austrian - Slovenian Polymer Meeting - ASPM 2013,
Bled;
03.04.2013
- 05.04.2013; in: "The Proceedings of the Austrian - Slovenian Polymer Meeting - ASPM 2013",
M. Zigon, T. Rajsp (Hrg.);
(2013),
ISBN: 978-961-269-992-5;
S. 37
- 38.
R. Potzmann, X.H. Qin, S. Mühleder, W. Holnthoner, H. Redl, J. Stampfl, A. Ovsianikov, R. Liska:
"Hyaluron vinyl esters as novel precursors for photocurable hydrogels";
Poster: Photopolymerization Fundamentals 2013,
Jackson Hole;
22.09.2013
- 25.09.2013; in: "Book of Abstracts",
(2013).
N. Pucher, C. Heller, B. Seidl, R. Inführ, L. Kuna, A. Haase, V. Schmidt, H. Lichtenegger, J. Stampfl, R. Liska:
"Two Photon Initiated Polymerization by Inones";
Poster: RadTech Europe 2007 - Europe´s event for UV/EB curing, Vienna 13-15 Nov 2007,
Wien;
13.11.2007
- 15.11.2007; in: "RadTech Europe 2007 - Conference Proceedings",
(2007),
7 S.
N. Pucher, C. Heller, B. Seidl, L. Kuna, A. Haase, V. Schmidt, H. Lichtenegger, J. Stampfl, R. Liska:
"New Initiators for Two-Photon Photopolymerization";
Poster: 8th Austrian Polymer Meeting,
Linz;
20.09.2006
- 22.09.2006; in: "8th Austrian Polymer Meeting - The Chain of Knowledge - From Catalyst to Application",
(2006).
N.U Pucher, S. Baudis, C. Heller, M. Schuster, V. Satzinger, V. Schmidt, H. Lichtenegger, J. Stampfl, R. Liska:
"Fabrication of Biocompatible and Cellular Polymers with Sub-Micrometer Feature Resolution by means of Two-Photon Induced Photopolymerization";
Poster: International Workshop on Biomacromolecules 2008,
Stockholm, S;
01.06.2008
- 04.06.2008; in: "International Workshop on Biomacromolecules 2008, Book of Abstracts",
(2008).
N.U Pucher, R. Inführ, S. Bashir, V. Satzinger, V. Schmidt, W. Husinsky, H. Lichtenegger, J. Stampfl, R. Liska:
"Two-Photon Induced Photopolymerization - A Powerful Tool for Precise 3D Submicrofabrication";
Vortrag: 9th Austrian Polymer Meeting,
Graz, A;
26.03.2008
- 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts",
(2008),
S. 11.
N.U Pucher, S. Krivec, N. Matsko, N. Galler, T. Koch, V. Satzinger, V. Schmidt, W. Grogger, H. Lichtenegger, R. Liska:
"Photopolymerizable Waveguides in Flexible Sol-Gel Cladding Materials";
Vortrag: RadTech Europe 2009,
Nizza, FR;
14.10.2009
- 15.10.2009; in: "Radtech Europe 2009, Proceedings",
(2009),
6 S.
N.U Pucher, A. Rosspeintner, S. Kontur, A. Ajami, W. Husinsky, G. Gescheidt, J. Stampfl, R. Liska:
"Photochemistry and Photophysics of Two-Photon Initiators";
Vortrag: RadTech Europe 2009,
Nizza, FR;
14.10.2009
- 15.10.2009; in: "Radtech Europe 2009, Proceedings",
(2009),
6 S.
N.U Pucher, A. Rosspeintner, V. Satzinger, V. Schmidt, G. Gescheidt, J. Stampfl, R. Liska:
"Evaluation of Triple Bond Containing Photoinitiators for the Two-Photon Induced Photopolymerization Process";
Vortrag: RadTech Europe 2009,
Nizza, FR;
14.10.2009
- 15.10.2009; in: "Radtech Europe 2009, Proceedings",
(2009),
6 S.
X.H. Qin, P. Esfandiari, S. Ligon, A. Ovsianikov, R. Liska:
"Storage Stable Thiol-Ene Formulations and advances applications thereof";
Vortrag: RadTech Europe 2013,
Basel (eingeladen);
15.10.2013
- 17.10.2013; in: "Abstract Book",
(2013),
S. 14.
X.H. Qin, B. Husar, J. Torgersen, S. Mühleder, W. Holnthoner, H. Redl, J. Stampfl, A. Ovsianikov, R. Liska:
"Biodegradable 3D Hydrogels Scaffold by Two-Photon Polymerization";
Poster: 25th European Conference on Biomaterials,
Madrid;
08.09.2013
- 12.09.2013; in: "Book of contributions",
(2013),
ISBN: 978-84-695-7831-5.
X.H. Qin, B. Husar, J. Torgersen, S. Mühleder, W. Holnthoner, H. Redl, J. Stampfl, A. Ovsianikov, R. Liska:
"Gelatin/Albumin-Based Hydrogels Scaffolds By Two-Photon Polymerization";
Vortrag: TERMIS-EU 2013,
Istanbul;
17.06.2013
- 20.06.2013; in: "Abstracts",
(2013),
S. 195.
X.H. Qin, K. Labuda, D. Bomze, A. Khadem, P. Slezak, R. Liska, H. Redl:
"ENGINEERED PHOTOCURABLE BIOMATERIALS TO HALT BLEEDINGApplication Of Thiol-Ene Click Chemistry For Potential Bone Replacement Materials";
Poster: ESPS 2014,
Vienna;
09.09.2014
- 12.09.2014; in: "3rd European Symposium of Photopolymer Science",
(2014),
ISBN: 978-3-9502992-9-8;
S. 188.
X.H. Qin, Z. Li, S. Ligon, J. Torgersen, A. Ovsianikov, S. Mühleder, W. Holnthoner, J. Stampfl, R. Liska:
"Biodegradable 3D Hydrogel Scaffolds: Synthesis and Two-photon Polymerization";
Poster: E-MRS 2012 FALL MEETING (European Materials research Society),
Warschau;
17.09.2012
- 21.09.2012; in: "E-Mrs 2012 Fall Meeting",
(2012).
X.H. Qin, Z. Li, A. Ovsianikov, J. Torgersen, S. Mühleder, W. Holnthoner, J. Stampfl, R. Liska:
"Developing biodegradable 3D hydrogel scaffolds: from synthesis to two-photon polymerization";
Poster: European Symposium of Photopolymer Science - ESPS 2012,
Torino;
04.09.2012
- 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts",
(2012),
S. 19.
X.H. Qin, Z. Li, J. Torgersen, A. Ovsianikov, S. Mühleder, W. Holnthoner, J. Stampfl, R. Liska:
"Developing Biodegradable 3D Hydrogels Scaffolds: From Synthesis to Two-photon Polymerization";
Poster: The 3rd TERMIS World Congress 2012,
Vienna;
05.09.2012
- 08.09.2012; in: "Journal of Tissue Engineering and Regenerative Medicine 2012",
John Wiley & Sons, Ltd.,
6/Supplement s1/
(2012),
ISSN: 1932-7005;
S. 369.
X.H. Qin, Z. Li, J. Torgersen, A. Ovsianikov, S. Mühleder, W. Holnthoner, J. Stampfl, R. Liska:
"Development of biocompatible 3D hydrogel scaffolds: From synthesis to two-photon-polymerization";
Poster: 5th Biomaterialsymposium,
Vienna;
19.11.2012
- 21.11.2012; in: "Abstracts",
J. Stampfl (Hrg.);
(2012),
S. 65.
X.H. Qin, S. Mühleder, P. Gruber, A. Ovsianikov, H. Redl, R. Liska:
"Design and Synthesis of a Novel Hydrogel Precursor: hyaluronate vinyl esters";
Poster: Advances in Tissue Regeneration 2013,
Lattrop;
14.11.2013
- 15.11.2013; in: "Advances in Tissue Regeneration 2013",
(2013).
X.H. Qin, S. Mühleder, J. Torgersen, A. Ovsianikov, H. Redl, J. Stampfl, R. Liska:
"3D construction of artifical ECM hydrogels by two-photon-induced polymerization";
Vortrag: Advances in Tissue Regeneration 2013,
Lattrop;
14.11.2013
- 15.11.2013; in: "Advances in Tissue Regeneration 2013",
(2013).
X.H. Qin, A. Ovsianikov, H. Redl, R. Liska:
"Development of a novel cytocompatible and photopolymerizable hydrogel precursor: hyaluronate vinyl ester";
Poster: 19th Swiss Conference on Biomaterials,
Davos;
25.06.2013
- 26.06.2013; in: "Program & Abstract",
D. Eglin, M. D´Este, D. Schraner (Hrg.);
(2013),
S. 19.
X.H. Qin, Z. Tomasikova, P. Gruber, B. Plochberger, M. Markovic, A. Ovsianikov, J. Stampfl, R. Liska:
"Two-Photon Microfabrication Of Biomimetic Hydrogel Constructs For Tissue Regeneration";
Vortrag: ESPS 2014,
Vienna;
09.09.2014
- 12.09.2014; in: "3rd European Symposium of Photopolymer Science",
(2014),
ISBN: 978-3-9502992-9-8;
S. 129.
X.H. Qin, J. Torgersen, C. Heller, M. Schwentenwein, G. Russmüller, J. Stampfl, R. Liska:
"Two-photon induced Polymerization for 3D Microfabrication of Biocompatible and Biodegradable Hydrogels";
Poster: European Symposium of Photopolymer Science,
Mulhouse, France;
28.11.2010
- 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book",
(2010).
X.H. Qin, J. Torgersen, S. Mühleder, W. Holnthoner, A. Ovsianikov, J. Stampfl, H. Redl, R. Liska:
"Two-photon microfabrication of artificial ECM hydrogel via thiol-ene chemistry";
Vortrag: 19th Swiss Conference on Biomaterials,
Davos;
25.06.2013
- 26.06.2013; in: "Program & Abstract",
D. Eglin, M. D´Este, D. Schraner (Hrg.);
(2013),
S. 19.
X.H. Qin, J. Torgersen, L. Zhiquan, A. Ovsianikov, C. Heller, M. Schwentenwein, G. Russmüller, J. Stampfl, R. Liska:
"Two-photon induced polymerization for 3D fabrication of Biocompatible and Biodegradable hydrogels";
Poster: 4. Wiener Biomaterialsymposium: Von der Werkstoffentwicklung bis zur klinischen Anwendung,
TU Wien, Wien;
15.11.2010
- 17.11.2010; in: "Tagungsband",
(2010),
S. 56.
P. Radovanovic, M. Kellner, J. Matovic, R. Liska:
"Asymmetric proton-conducting membrane made by photopolymerization";
Poster: RadTech Europe 2011,
Basel, CH;
18.10.2011
- 20.10.2011; in: "RadTech Europe 2011 - Abstract Book",
(2011),
S. 129.
P. Radovanovic, M. Kellner, J. Matovic, R. Liska:
"Novel asymmetric interpenetrating proton-conducting membrane";
Poster: ICOM 2011 - International Congress on Membranes and Membrane Processes,
Amsterdam, Niederlande;
23.07.2011
- 29.07.2011; in: "ICOM 2011",
(2011),
S. 642.
Ph Radovanovic, M. Kellner, J. Matovic, R. Liska:
"Asymmetric Sol-gel Proton-conducting Membrane";
Poster: 4M 2011 - 8th International Conference on Multi-Material Micro Manufacture,
Stuttgart, D;
08.11.2011
- 10.11.2011; in: "4M 2011 - Proceedings of the 8th International Conference on Multi-Material Micro Manufacture",
Research Publishing,
(2011),
ISBN: 978-981-07-0319-6;
S. 230
- 233.
R. Reichsöllner, S. Orman, C. Hofstetter, M. Schwentenwein, G. Russmüller, J. Stampfl, R. Liska, S. Baudis:
"3D-printed, tough and biocompatible photopolymers for in vivo bone tissue regeneration";
Poster: Termis Eu 2019,
Rhodes, Greece;
27.05.2019
- 31.05.2019; in: "Termis EU 2019",
(2019),
S. 1625.
R. Reichsöllner, X.H. Qin, K. Labuda, J. Chen, V. Hruschka, A. Khadem, S. Baudis, R. Liska, H. Redl, P. Slezak:
"Novel, Bio-Compatible Peptide-Conjugates for Hemostasis";
Poster: Danube Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017",
Book of Abstracts.com,
(2017),
ISBN: 978-3-9504017-6-9;
S. PO-89.
A. Ricke, B. Dellago, K. Ehrmann, R. Liska, S. Baudis:
"Photopolymerizable And Degradable Biomaterials Based On Acetal Moieties";
Vortrag: The 6th (virtual) European Symposium of Photopolymer Science,
Wien;
15.06.2021
- 17.06.2021; in: "vESPS 2021",
(2021),
ISBN: 978-3-9504809-3-1;
S. 151.
A. Rosspeintner, N.U Pucher, M. Griesser, R. Liska, G. Gescheidt:
"Mechanistic Investigation on Novel Two-Photon Absorbing Photoinitiators";
Poster: XXIV International Conference on Photochemistry,
Toledo;
19.07.2009
- 24.07.2009; in: "Book of Abstracts",
(2009),
S. 483.
L. Ruppitsch, G. Peer, K. Ehrmann, B. Koch, R. Liska:
"Difunctional Cyclopolymerizable Monomers For Reduced Shrinkage Of Photopolymerizable Networks";
Vortrag: The 6th (virtual) European Symposium of Photopolymer Science,
Wien;
15.06.2021
- 17.06.2021; in: "vESPS 2021",
(2021),
ISBN: 978-3-9504809-3-1;
S. 142.
L. Ruppitsch, G. Peer, K. Ehrmann, T. Koch, R. Liska:
"Difunctional Low Shrinkage Monomers performing Light-Induced Cyclopolymerization";
Vortrag: Polymer Meeting 14,
Graz;
30.08.2021
- 02.09.2021; in: "Polymer Meeting 14 Book of Abstracts",
Verlag der Technischen Universität Graz,
(2021),
ISBN: 978-3-85125-844-8;
S. 62.
G. Russmüller, R. Liska, D. Moser, J. Stampfl, C. Schopper, R. Ewers:
"Knochenregeneration mittels Photopolymeren - erste in-vivo-Ergebnisse";
Vortrag: 4. Wiener Biomaterialsymposium,
Wien;
15.11.2010
- 17.11.2010; in: "Tagungsband",
J. Stampfl (Hrg.);
(2010),
S. 16.
M. Sandholzer, M. Schuster, R. Liska, C. Turecek, F. Varga, C. Slugovc:
"ROMP Based Macroinitiator-Coinitiator Systems With Improved Migration Stability";
Poster: 9th Austrian Polymer Meeting,
Graz, A;
26.03.2008
- 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts",
(2008),
S. 106.
M. Sandholzer, M. Schuster, R. Liska, C. Turecek, F. Varga, F. Stelzer, C. Slugovc:
"Ring opening metathesis polymers as macroinitiator-coinitiator systems for the photopolymerization of acrylates";
Vortrag: 234th ACS National Meeting,
Boston, USA;
19.08.2007
- 23.08.2007; in: "Abstracts of Papers",
(2007),
2 S.
M. Sangermano, R. Liska, N. Klikovits:
"Successful UV-Curing of epoxy composites";
Vortrag: 255th ACS National Meeting & Exposition,
New Orleans, LA, United States;
18.03.2018
- 22.03.2018; in: "255th ACS National Meeting & Exposition",
American Chemical Society Washington, D. C,
(2018),
S. POLY-40.
V. Satzinger, V. Schmidt, L. Kuna, R. Inführ, R. Liska, J. Krenn:
"Rapid prototyping of micro-optics on organic light emitting diodes and organic photo cells by means of two-photon 3D lithography and nano-imprint lithography";
Poster: SPIE Photonics Europe 2008,
Strasbourg, F;
07.04.2008
- 11.04.2008; in: "Proceedings of SPIE",
(2008).
V. Satzinger, V. Schmidt, L. Kuna, C. Palfinger, R. Inführ, R. Liska, J. R. Krenn:
"Rapid prototyping of micro-optics on organic light emitting diodes and organic photo cells by means of two-photon 3D lithography and nano-imprint lithography";
Poster: Photonics Europe 2008 (SPIE),
Strasbourg, Frankreich;
07.04.2008
- 10.04.2008; in: "Proc. of SPIE Vol. 6992",
(2008),
S. 699217-1
- 699217-10.
S. Schandl, K. Ehrmann, P. Knaack, J. Stampfl, R. Liska:
"Polycarbonates 3D-printed via Hot Lithography";
Poster: The 6th (virtual) European Symposium of Photopolymer Science,
Wien;
15.06.2021
- 17.06.2021; in: "vESPS 2021",
(2021),
ISBN: 978-3-9504809-3-1;
S. 168.
C. Schnöll, C. Gorsche, T. Koch, N. Moszner, R. Liska:
"Debonding on demand: irreversible approach via thermally induced gas formation & network regulation";
Vortrag: RadTech Europe Conference & Exhibition 2017,
Prag;
17.10.2017
- 19.10.2017; in: "RadTech Europe Conference & Exhibition 2017",
(2017),
S. 51.
C. Schnöll, C. Gorsche, T. Koch, N. Moszner, R. Liska:
"Introducing Debonding on Demand within highly Cross-Linked Photopolymers";
Poster: 5th European Symposium of Photopolymer Science,
Mulhouse, France;
03.09.2018
- 06.09.2018; in: "5th European Symposium of Photopolymer Science",
5th European Symposium of Photopolymer Science,
(2018),
S. PO42.
C. Schnöll, C. Gorsche, T. Koch, N. Moszner, R. Liska:
"Introducing Highly Crosslinked Photopolymers with Debonding on Demand Properties";
Vortrag: Danube Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017",
Book of Abstracts.com,
(2017),
ISBN: 978-3-9504017-6-9;
S. OP-6.
C. Schnöll, C. Gorsche, N. Moszner, R. Liska:
"Debonding on Demand (DoD) via thermally induced gas formation using blocked isocyanates";
Poster: 4th European Symposium of Photopolymer Science,
Leipzig;
11.09.2016
- 14.09.2016; in: "ESPS 2016",
(2016),
S. P-43.
S. Schörpf, Y. Catel, N. Moszner, C. Gorsche, R. Liska:
"Reduction of polymerization-induced shrinkage stress via combination of radical ring opening and addition fragmentation chain transfer";
Vortrag: 5th European Symposium of Photopolymer Science,
Mulhouse, France;
03.09.2018
- 06.09.2018; in: "5th European Symposium of Photopolymer Science",
5th European Symposium of Photopolymer Science,
(2018),
S. 13.
S. Schörpf, Y. Catel, N. Moszner, C. Gorsche, R. Liska:
"Shrinkage stress reduction of polymerizing networksvia combination of vinylcyclopropanes withaddition fragmentation chain transfer";
Vortrag: RadTech Europe 2019,
München, Deutschland;
15.10.2019
- 16.10.2019; in: "RadTech Europe 2019",
(2019),
S. 70.
S. Schörpf, C. Gorsche, Y. Catel, N. Moszner, R. Liska:
"Urethane-based vinylcyclopropanes (VCPs) for low shrinkage dental composites";
Poster: Danube Vltava Sava Polymer Meeting 2017 DVSPM,
Wien;
05.09.2017
- 08.09.2017; in: "DVSPM 2017",
(2017),
ISBN: 978-3-9504017-6-9;
S. PO66.
M. Schuster, S. Chen, R. Liska, M. Rumpler, C. Turecek, F. Varga, J. Stampfl:
"Development of Biodegradable Photopolymers for Bone Tissue Engineering";
Poster: Radtech Europe 2005: Exhibition and Conference,
Barcelona;
18.10.2005
- 20.10.2005; in: "RadTech Europe 2005 Conference Proceedings Volume II",
(2005),
S. 365
- 372.
M. Schuster, S. Chen, R. Liska, C. Turecek, F. Varga, J. Stampfl:
"Photopolymerizable Biopolymers for Rapid Prototyping of Cellular Bone Replacement Materials";
Poster: Radtech Europe 2005: Exhibition and Conference,
Barcelona;
18.10.2005
- 20.10.2005; in: "RadTech Europe 2005 Conference Proceedings Volume II",
(2005),
S. 479
- 486.
M. Schuster, R. Liska, F. Varga, C. Turecek:
"Gelatin-based Biophotopolymers";
Vortrag: 2. Wiener Biomaterialsymposium,
Wien, Österreich;
22.11.2006
- 24.11.2006; in: "2. Wiener Biomaterialsymposium - CD",
(2006),
7 S.
M. Schuster, M. Sandholzer, C. Turecek, F. Varga, C. Slugovc, R. Liska:
"Synthesis and Evaluation of Eosin-based Photoinitiators with Improved Migration Stability";
Vortrag: RadTech Europe 2007,
Vienna, A (eingeladen);
13.11.2007
- 15.11.2007; in: "RadTech Europe 2007 Conference Proceedings",
(2007),
7 S.
M. Schuster, C. Turecek, C. Heller, F. Varga, J. Stampfl, R. Liska:
"3D-Structuring of Gelatine based Photopolymers";
Poster: RadTech Europe 2007 - Europe´s event for UV/EB curing, Vienna 13-15 Nov 2007,
Wien;
13.11.2007
- 15.11.2007; in: "RadTech Europe 2007 - Conference Proceedings",
(2007),
6 S.
M. Schuster, C. Turecek, B. Kaiser, F. Varga, J. Stampfl, R. Liska:
"Biophotopolymers for Rapid Prototyping of Cellular Bone Replacement Materials";
Poster: Junior Scientist Conference,
Wien;
19.04.2006
- 21.04.2006; in: "Junior Scientist Conference 2006 - Proceedings",
(2006),
ISBN: 3-902463-05-8;
S. 173
- 174.
M. Schuster, C. Turecek, A. Mateos, J. Stampfl, F. Varga, R. Liska:
"Evaluation of biocompatible Photopolymers for Rapid Prototyping of Bone Substitutes";
Poster: 2nd Stipomat Workshop,
Seggau, Austria;
23.10.2006
- 25.10.2006; in: "2nd Stipomat Workshop - Book of Abstracts",
(2006),
S. P17.
M. Schuster, C. Turecek, M. Rumpler, F. Varga, R. Liska, J. Stampfl:
"Development of Photopolymerizable Biopolymers for Rapid Prototyping of Cellular Bone Replacement Materials";
Poster: EuroMat 2005,
Prag, Tschechien;
05.09.2005
- 06.09.2005; in: "Euromat 2005 European Congress on Advanced Materials and Processes http.//www.Euromat2005.fems.org",
(2005),
1 S.
M. Schuster, C. Turecek, J. Stampfl, F. Varga, R. Liska:
"Biofunctional Photopolymers for Micro-Stereolithography";
Vortrag: 8th International Symposium on Laser Precision Microfabrication, LPM 2007,
Vienna, A;
24.04.2007
- 28.04.2007; in: "Proceedings of LPM2007",
(2007),
Paper-Nr. 07-72,
5 S.
M. Schuster, C. Turecek, J. Stampfl, F. Varga, R. Liska:
"Biophotopolymers for hard tissue replacement";
Poster: XXXIV ESAO Congress,
Krems, A;
05.09.2007
- 08.09.2007; in: "The International Journal of Artificial Organs, Abstracts of the XXXIV ESAO Congress",
D. Falkenhagen (Hrg.);
The International Journal of Artificial Organs,
30 (8)
(2007),
ISSN: 0391-3988;
S. 705.
M. Schuster, C. Turecek, F. Varga, H. Lichtenegger, J. Stampfl, R. Liska:
"Biodegradable photopolymers for bone tissue engeneering";
Vortrag: 8th Austrian Polymer Meeting,
Linz, Austria;
20.09.2006
- 22.09.2006; in: "8th Austrian Polymer Meeting - Abstracts",
(2006).
M. Schuster, C. Turecek, F. Varga, J. Stampfl, R. Liska:
"Acrylamide-based Biophotopolymers for Bone Tissue Engineering";
Poster: 7th Austrian Polymer Meeting,
Graz, Österreich;
04.07.2005
- 06.07.2005; in: "7th Austrian Polymer Meeting - Final Program",
(2005),
S. 69.
M. Schuster, C. Turecek, F. Varga, G. Weigel, J. Stampfl, R. Inführ, C. Heller, S. Baudis, R. Liska:
"Fundamental investigations towards a new bone replacement material containing gelatin photopolymers";
Poster: International Workshop on Biomacromolecules 2008,
Stockholm, S;
01.06.2008
- 04.06.2008; in: "International Workshop on Biomacromolecules 2008, Book of Abstracts",
(2008).
M. Schuster, C. Turecek, T. Verdianz, J. Stampfl, F. Varga, R. Liska:
"Development of Biodegradable Photopolymers";
Poster: 2nd Stipomat Workshop,
Seggau, Austria;
23.10.2006
- 25.10.2006; in: "2nd Stipomat Workshop - Book of Abstracts",
(2006),
S. P16.
P. Schwarzl, K. Ehrmann, C. Grasl, H. Bergmeister, H. Schima, B. Podesser, R. Liska, S. Baudis:
"Enhanced Mechanical Properties of Hard-Block Degradable Thermoplastic Polyurethanes for Vascular Tissue Regeneration";
Vortrag: TERMIS 6th World Congress,
Maastricht, Niederlande;
15.11.2021
- 19.11.2021; in: "Book of Abstract",
(2021).
M. Schwentenwein, S. Baudis, F. Nehl, S. Ligon, A. Nigisch, H. Bergmeister, A. Blümel, W. Grogger, D. Bernhard, J. Stampfl, R. Liska:
"Elastomeric Photopolymers by Thiol-ene Polymerization for Vascular Tissue Engineering";
Poster: 4th Joint ESAO IFAO Congress,
Porto, P;
09.10.2011
- 12.10.2011; in: "The International Journal of Artificial Organs",
Wichtig Editore,
Milano
(2011),
ISSN: 0391-3988;
S. 679.
M. Schwentenwein, C. Heller, J. Stampfl, R. Liska:
"Rapid Prototyping of Biocompatible and Biodegradable monomers";
Vortrag: RadTech Europe 2009,
Nizza, FR;
14.10.2009
- 15.10.2009; in: "Radtech Europe 2009, Proceedings",
(2009),
8 S.
M. Schwentenwein, C. Heller, J. Stampfl, F. Varga, R. Liska:
"Biocompatible and Biodegradable monomers based on Oligoethylene glycols with different polymerizable groups";
Vortrag: RadTech Europe 2009,
Nizza, FR;
14.10.2009
- 15.10.2009; in: "Radtech Europe 2009, Proceedings",
(2009),
6 S.
M. Schwentenwein, C. Heller, J. Stampfl, F. Varga, R. Liska:
"Biocompatible and Biodegradable monomers with different polymerizable groups";
Poster: EPF 2009, European Polymer Congress,
Graz, A;
12.07.2009
- 17.07.2009; in: "EPF'09, Book of Abstracts",
(2009),
S. 208.
M. Schwentenwein, C. Heller, J. Stampfl, F. Varga, G. Russmüller, R. Liska:
"New Types of Photopolymers for Regenerative Medicine";
Poster: ESAO - ASAIO Winter School 2011,
Semmering, A;
26.01.2010
- 29.01.2010; in: "ESAO-ASAIO Winter School",
(2011),
S. 66.
M. Schwentenwein, C. Heller, F. Varga, G. Russmüller, J. Stampfl, R. Liska:
"3D fabrication of poly(vinyl alcohol)-based photopolymers for biomedical applications";
Poster: European Symposium of Photopolymer Science,
Mulhouse, France;
28.11.2010
- 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book",
(2010).
M. Schwentenwein, C. Heller, F. Varga, G. Russmüller, J. Stampfl, R. Liska:
"3d-Fabrication Of Biodegradable Poly(vinyl Alcohol)-Based";
Vortrag: 19th Annual Meeting of the BioEnvironmental Polymer Society (BEPS),
Wien;
28.09.2011
- 30.09.2011; in: "19th Annual Meeting of the BioEnvironmental Polymer Society",
(2011),
ISBN: 978-3-9502992-3-6;
S. OP-10.
M. Schwentenwein, F. Nehl, H. Wilhelm, H. Bergmeister, D. Bernhard, J. Stampfl, R. Liska:
"Photoelastomers based on thiol-ene polymerization";
Vortrag: RadTech Europe 2011,
Basel, CH;
18.10.2011
- 20.10.2011; in: "RadTech Europe 2011 - Abstract Book",
(2011),
S. 90.
M. Schwentenwein, J. Stampfl, C. Heller, F. Varga, G. Russmüller, R. Liska:
"3D-Structuring of Poly(vinyl alcohol)-based Photopolymers";
Vortrag: Termis Eu 2011,
Granada, E;
07.06.2011
- 10.06.2011; in: "TERMIS EU 2011 Annual Meeting",
(2011).
B. Seidl, D. Herzog, G. Grabner, R. Liska:
"A Cleavable Photoinitiators with Reduced Oxygen Sensitivity";
Poster: RadTech Europe 2003,
Berlin, Germany;
03.11.2003
- 05.11.2003; in: "RadTech Europe 2003 Conference Proceedings",
(2003),
ISBN: 3-87870-152-7;
S. 1011
- 1016.
B. Seidl, D. Herzog, G. Grabner, R. Liska:
"Photochemistry and photophysics of heterocyclic ketones";
Poster: 10th Blue Danube Symposium on Heterocyclic Chemistry,
Vienna, Austria;
03.09.2003
- 06.09.2003; in: "10th Blue Danube Symposium on Heterocyclic Chemistry",
(2003),
ISBN: 80-227-1938-2;
S. PO-163.
B. Seidl, R. Liska:
"New Coinitiator-free Benzophenone Derived Photoinitiator";
Poster: RadTech Europe 2003,
Berlin, Germany;
03.11.2003
- 05.11.2003; in: "RadTech Europe 2003 Conference Proceedings",
(2003),
ISBN: 3-87870-152-7;
S. 1001
- 1007.
B. Seidl, R. Liska, H. Gruber:
"Benzophenone based Ynones as photoinitiators";
Poster: 6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium,
Vienna, Austria;
15.09.2003
- 17.09.2003; in: "6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium ",
(2003),
S. 125.
B. Seidl, R. Liska, H. Gruber, G. Grabner:
"Laser flash photolysis of pyridine ketones";
Poster: 6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium,
Vienna, Austria;
15.09.2003
- 17.09.2003; in: "6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium ",
(2003),
S. 126.
K. Seidler, P. Gauss, M. Kury, G. Harakaly, M. Griesser, T. Koch, J. Stampfl, C. Gorsche, N. Moszner, R. Liska:
"Tough and low shrinkage photopolymers";
Vortrag: European Coatings Show and Conference 2017,
Nürnberg (eingeladen);
02.04.2017
- 06.04.2017; in: "European Coatings Journal 04-2017",
Vincentz Network GmbH & Co. KG, Hannover (Deutschland),
04/2017
(2017),
ISSN: 0930-3847;
S. 96.
K. Seidler, C. Gorsche, T. Koch, N. Moszner, R. Liska:
"The influence of addition-fragmentation-chain-transfer on mechanical properties of methacrylate networks";
Vortrag: DVSPM 2015,
Gmunden;
11.05.2015
- 13.05.2015; in: "Proceedings of a Conference on Polymer Science",
(2015),
ISBN: 978-3-99033-491-1;
S. 65.
K. Seidler, C. Gorsche, M. Kury, H. Reghunathan, T. Koch, N. Moszner, R. Liska:
"Toughening of Methacrylate Networks through Addition-Fragmentation Chain Transfer";
Vortrag: RadTech Europe 2015 Conference,
Prague;
13.10.2015
- 15.10.2015; in: "Abstract Book",
(2015),
S. 17.
K. Seidler, C. Gorsche, N. Moszner, R. Liska:
"The Effect Of Leaving Groups Of Chain Transfer Agents";
Poster: ESPS 2014,
Vienna;
09.09.2014
- 12.09.2014; in: "3rd European Symposium of Photopolymer Science",
(2014),
ISBN: 978-3-9502992-9-8;
S. 211.
K. Seidler, S. Ligon, S. Baudis, T. Koch, J. Stampfl, R. Liska:
"Biodegradable Thermoplastic Polyurethanes: Synthesis and Characterization of Improved TPUs";
Poster: 4th Joint ESAO IFAO Congress,
Porto, P;
09.10.2011
- 12.10.2011; in: "The International Journal of Artificial Organs",
Wichtig Editore,
Milano
(2011),
ISSN: 0391-3988;
S. 692.
N. Seyidova, C. Grasl, M. Stoiber, C. Schreiber, I. Walter, K. Seidler, S. Ligon, S. Baudis, R. Liska, D. Bernhard, H. Schima, H. Bergmeister:
"Biocompatibility evaluation of bioresorbable substitutes";
Poster: ISACB´S Biennal Meeting 2012,
London, UK;
12.09.2012
- 15.09.2012; in: "ISACB´S Biennal Meeting 2012 - Programm",
(2012),
S. 49.
N. Seyidova, C. Grasl, M. Stoiber, C. Schreiber, I. Walter, K. Seidler, S. Ligon, S. Baudis, R. Liska, D. Bernhard, H. Schima, H. Bergmeister:
"Elastomeric, nanostructured, biodegradable vascular grafts for small-diamter vascular replacement";
Poster: BioNanoMed 2012,
Krems;
01.03.2012
- 02.03.2012; in: "BioNanoMed 2012",
(2012).
M. Siklos, Z. Li, N.U Pucher, R. Liska, J. Stampfl:
"New Initiators for Two-Photon Photopolymerisation";
Poster: Junior Scientist Conference 2010,
Vienna;
07.04.2010
- 09.04.2010; in: "Proceedings",
(2010),
ISBN: 978-3-200-01797-9;
S. 211
- 212.
M. Siklos, N.U Pucher, Z. Li, K. Cicha, A. Rosspeintner, A. Ajami, G. Gescheidt, W. Husinsky, J. Stampfl, R. Liska:
"Structure optimization of novel initiators for two-photon polymerization (2PP) process";
Vortrag: 11th International Symposium on Laser Precision Microfabrication, LPM 2010,
Stuttgart, D;
07.06.2010
- 10.06.2010; in: "Book of Abstracts",
(2010).
C. Slugovc, M. Sandholzer, M. Schuster, F. Varga, R. Liska:
"A Romp-based photoinitiator-coinitiator system with improved migration stability";
Poster: International Workshop on Biomacromolecules 2008,
Stockholm, S;
01.06.2008
- 04.06.2008; in: "International Workshop on Biomacromolecules 2008, Book of Abstracts",
(2008).
L. Spoljaric-Lukacic, R. Saf, R. Liska, S. Knaus:
"Peroxide-initiated grafting of maleimides onto hydrocarbon substrates";
Vortrag: European Polymer Congress 2005,
Moskau, Russland;
27.06.2005
- 01.07.2005; in: "CD European Polymer Congress 2005",
(2005),
Paper-Nr. o.1.3.1 Ref.1946,
3 S.
K. Stadlmann, K. Cicha, J. Kumpfmüller, R. Liska, J. Stampfl, U. Hinze, B. Chichkov:
"Development of a two Photon Polymerization setup for Structuring optical Waveguides with High Throughput";
Vortrag: Materials science and engineering MSE 2010,
Darmstadt;
24.08.2010
- 26.08.2010; in: "Tagungsband Material science and engineering 2010",
(2010),
S. 32.
K. Stadlmann, K. Cicha, J. Kumpfmüller, V. Schmidt, V. Satzinger, R. Liska, J. Stampfl:
"Fabrication of Optical Interconnects with Two Photon Polymerization";
Vortrag: 11th International Symposium on Laser Precision Microfabrication, LPM 2010,
Stuttgart, D;
07.06.2010
- 10.06.2010; in: "Proceedings of LPM2010",
K. Sugioka (Hrg.);
(2010),
S. #10-15.
J. Stampfl, R. Cano Vives, S. Seidler, R. Liska, F. Schwager, H. Gruber, A. Wöß, P. Fratzl:
"Rapid Prototyping - A Route for the Fabrication of Biomimetic Cellular Materials";
Vortrag: 1st International Conference on Advanced Reserch in Virtual and Rapid Prototyping, Leira (Portugal),
Leira (Portugal);
01.10.2003
- 04.10.2003; in: "1st International Conference on Advanced Research in Virtual and Rapid Prototyping, Leira (Portugal)",
Leira (Portugal)
(2003),
ISBN: 972-99023-0-5;
S. 659
- 666.
J. Stampfl, P. Dorfinger, R. Gmeiner, R. Liska:
"Materials development for lithography-based 3D-printing";
Vortrag: Makromolekulares Kolloquium,
Freiburg;
24.02.2016
- 26.02.2016; in: "Macromolecular Chemistry and Physics",
Wiley-VCH,
2
(2016),
S. 90.
J. Stampfl, S. Gruber, R. Felzmann, S. Springer, R. Liska:
"Lithographiebasierte Fertigung keramischer Bauteile";
Vortrag: RapidTech 2011,
Erfurt;
24.05.2011
- 25.05.2011; in: "Fachmesse und Anwendertagung für Rapid-Technologie",
A. Gebhardt (Hrg.);
(2011),
Paper-Nr. Anwendertagung 5/2,
4 S.
J. Stampfl, C. Heller, M. Schuster, S. Baudis, J. Homa, R. Liska:
"Biofunktionelle Photopolymere für die generative Fertigung";
Vortrag: Rapidtech,
Erfurt/Deutschland;
27.05.2008
- 28.05.2008; in: "Tagungsband",
(2008),
Paper-Nr. AT-Session5-V2,
4 S.
J. Stampfl, C. Heller, M. Schwentenwein, S. Baudis, F. Varga, R. Liska:
"Entwicklung nicht-toxischer Biophotopolymere für die generative Fertigung";
Vortrag: 12. Problemseminar Deformation und Bruch,
Merseburg;
24.06.2009
- 26.06.2009; in: "Tagungsband Deformation und Bruch",
W. Grellmann (Hrg.);
(2009),
4 S.
J. Stampfl, C. Heller, M. Schwentenwein, G. Russmüller, F. Varga, R. Liska:
"Biophotopolymers for stereolithography and two-photon lithography";
Hauptvortrag: World conference on regenerative medicine,
Leipzig (eingeladen);
29.10.2009
- 31.10.2009; in: "Regenerative Medicine",
F. Emmrich (Hrg.);
Future Medicine,
4 (6)
(2009),
ISSN: 1746-0751;
S. S58
- S59.
J. Stampfl, C. Heller, M. Schwentenwein, F. Varga, R. Liska:
"Biocompatible and biodegradeable photopolymers for lithography based solid freeform fabrication";
Vortrag: European Polymer Congress 2009,
Graz;
12.07.2009
- 17.07.2009; in: "Book of Abstracts",
F. Stelzer (Hrg.);
(2009),
S. 208.
J. Stampfl, J. Homa, R. Liska:
"Lithography based Additive Manufacturing - Materials and Processes";
Vortrag: ChinaNANO 2015,
Beijing;
03.09.2015
- 05.09.2015; in: "The 6th International Conference on Nanoscience & Technology",
(2015),
S. 179.
J. Stampfl, R. Inführ, B. Seidl, H. Lichtenegger, R. Liska, V. Schmidt, L. Kuna, A. Haase:
"Two-Photon-3D-lithography of Functional Polymers";
Vortrag: Polymerwerkstoffe 2006,
Halle/Saale, Deutschland;
27.09.2006
- 29.09.2006; in: "Polymerwerkstoffe 2006 -Abstracts",
(2006),
ISBN: 3-86010-856-5;
S. 36.
J. Stampfl, R. Inführ, K. Stadlmann, N.U Pucher, H. Lichtenegger, V. Schmidt, R. Liska:
"Materials for the fabrication of optical waveguides with two photon photopolymerization";
Vortrag: Fifth International WLT Conference on Lasers in Manufacturing,
München (eingeladen);
15.06.2009
- 18.06.2009; in: "Lasers in Manufacturing 2009",
A. Ostendorf (Hrg.);
AT Fachverlag GmbH,
Stuttgart
(2009),
S. P1
- P4.
J. Stampfl, G. Mitteramskogler, S. Springer, S. Gruber, A. Ovsianikov, R. Liska:
"Lithography-based Additive Manufacturing of Cellular Ceramic and Composite Structures";
Vortrag: Euromat 2011,
Montpellier;
12.09.2011
- 15.09.2011; in: "Euromat 2011",
(2011),
Paper-Nr. B33-O21H,
1 S.
J. Stampfl, M. Schuster, S. Baudis, H. Lichtenegger, R. Liska, C. Turecek, F. Varga:
"Biodegradable stereolithography resins with defined mechanical properties";
Vortrag: 3rd International conference on virtual and rapid prototyping (VRAP),
Leiria, Portugal;
24.09.2007
- 29.09.2007; in: "Virtual and Rapid Manufacturing",
P. Bartolo (Hrg.);
Taylor and Francis,
(2007),
ISBN: 978-0-415-41602-3;
S. 283
- 288.
J. Stampfl, M. Schuster, C. Heller, R. Liska, C. Turecek, F. Varga:
"Entwicklung und mechanische Charakterisierung bioabbaubarer Photopolymere";
Vortrag: 11. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Merseburg, Deutschland;
20.06.2007
- 22.06.2007; in: "Tagungsband",
(2007),
6 S.
J. Stampfl, M. Schuster, R. Inführ, R. Liska, M.H. Luxner, H. E. Pettermann, F. Varga, C. Turecek:
"Rapid Prototyping als Fertigungswerkzeug zur Herstellung zellularer Strukturen";
Vortrag: 52. Metallkunde Kolloquium,
Lech am Arlberg;
19.04.2006
- 21.04.2006; in: "52. Metallkunde-Kolloquium: Werkstoffforschung für Wirtschaft und Gesellschaft",
(2006),
S. #.
J. Stampfl, J. Torgersen, A. Ovsianikov, X.H. Qin, Z. Li, S Mühleder, W Holnthoner, R. Liska:
"Photo-stimulation of low-toxicity biopolymers in additive manufacturing";
Vortrag: Materials Science and Engineering 2012,
Darmstadt, Deutschland;
25.09.2012
- 27.09.2012; in: "MSE Programme",
(2012),
S. 22.
J. Stampfl, A. Wöß, S. Seidler, F. Schwager, R. Liska, H. Gruber:
"Water soluble photocurable resins for rapid prototyping applications";
Vortrag: 6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium,
Vienna, Austria;
15.09.2003
- 17.09.2003; in: "6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium ",
(2003),
S. 70.
S. Stanic, A. Altun, D. Reicharlzeder, M. Schwentenwein, S. Baudis, J. Stampfl, R. Liska:
"Highly Filled Hydrogels as Biocomposites and Ceramic Precursors for 3D Printing Aplications";
Poster: Danube Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017",
Book of Abstracts.com,
(2017),
ISBN: 978-3-9504017-6-9;
S. PO-24.
S. Stanic, S. Baudis, M. Schwentenwein, R. Liska:
"3D printing of filled hydrogels as ceramic precursors and biocomposites";
Vortrag: Bypos Workshop 2017,
Zemplínská Sírava, Slovakia;
12.06.2017
- 16.06.2017; in: "Bypos Workshop Book 2017",
(2017),
S. 31.
W. Steiger, P. Gruber, M. Tromayer, A. Dobos, M. Lunzer, R. Liska, A. Ovsianikov:
"Fully automated z-scan setup based on a tunable fs-oscillator";
Vortrag: SPIE Photonics West 2018,
San Francisco, USA;
29.01.2018
- 30.01.2018; in: "Proceedings of SPIE Vol. 10492",
SPI Digital Library,
1049203
(2018).
W. Steiger, P. Gruber, M. Tromayer, M. Lunzer, A. Ajami, W. Husinsky, R. Liska, A. Ovsianikov:
"Fully Automated Z-scan Setup Based on a Tunable FS-Oscillator";
Vortrag: Danube Vltava Sava Polymer meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting",
(2017),
S. OP-102.
P. Steinbauer, C. Dworak, P.J. Thurner, O.G. Andriotis, R. Liska:
"Phosporus-Based Raft Polymers for Bio Adhesion";
Poster: Danube Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017",
Book of Abstracts.com,
(2017),
ISBN: 978-3-9504017-6-9;
S. PO-25.
P. Steinbauer, J. Kotmel, A. Rohatschek, O.G. Andriotis, R. Liska, P.J. Thurner, S. Baudis:
"Single-Molecule Force Spectroscopy Measurement of natural and biomimetic Adhesion Motifs";
Vortrag: ICBBA 2021 - 4th International Conference on Biological and Biomimetic Adhesives,
Aveiro Portugal;
18.02.2021
- 19.02.2021; in: "4th International Conference on Biological and Biomimetic Adhesives",
(2021),
S. 66.
P. Steinbauer, S. Orman, C. Hofstetter, M. Schwentenwein, G. Russmüller, J. Stampfl, R. Liska, S. Baudis:
"Biocompatible photopolymer scaffolds tailored for patient specific solutions for bone tissue regeneration";
Poster: 11th World Biomaterials Congress,
Hampshire, United Kingdom, online;
11.12.2020
- 15.12.2020; in: "11th World Biomaterials Congress",
WBC2020VIR-4577
(2020),
1 S.
P. Steinbauer, S. Orman, C. Hofstetter, M. Schwentenwein, G. Russmüller, J. Stampfl, R. Liska, S. Baudis:
"Patient-specific biocompatible polymer scaffolds for bone tissue regeneration";
Poster: 2020 TERMIS EU Abstracts,
Manchester, online;
26.05.2020
- 29.05.2020; in: "2020 TERMIS EU Abstracts",
e Cells und Materials,
2020, Collection 1
(2020),
ISSN: 1473-2262;
S. 308.
P. Steinbauer, A. Rohatschek, O.G. Andriotis, S. Baudis, P.J. Thurner, R. Liska:
"Raft Polymers as Adhesion Motifs for Bone Glue Applications";
Vortrag: VSS 2018 - Vienna Young Scientists Symposium,
Wien;
07.06.2018
- 08.06.2018; in: "VSS 2018",
Book-of-Abstracts.com,
(2018),
ISBN: 978-3-9504017-8-3;
S. 108
- 109.
P. Steinbauer, A. Rohatschek, O.G. Andriotis, R. Liska, P.J. Thurner, S. Baudis:
"Adhesion motifs for bone glue applications";
Vortrag: Austrian Bone Conference - ABC 2018,
Wien;
23.11.2018
- 24.11.2018; in: "Austrian Bone Conference - ABC 2018",
Wiener Medizinische Wochenschrift; Springer-Verlag Austria,
November 2018, Volume 168, Supplement 2
(2018),
ISSN: 0043-5341;
S. 454.
P. Steinbauer, A. Rohatschek, O.G. Andriotis, P.J. Thurner, R. Liska, S. Baudis:
"Adhesion Forces of selected Bone-binding Motifs determined via Single Molecule Force Spectroscopy";
Vortrag: Termis Eu 2019,
Rhodes, Greece;
27.05.2019
- 31.05.2019; in: "Termis Eu 2019",
(2019),
S. 1248.
P. Steinbauer, L. Sinawehl, R. Liska, S. Baudis:
"High-performance photocurable adhesives for bone repair";
Vortrag: Polymer Meeting 14,
Graz;
30.08.2021
- 02.09.2021; in: "Polymer Meeting 14 Book of Abstracts",
Verlag der Technischen Universität Graz,
(2021),
ISBN: 978-3-85125-844-8;
S. 57.
P. Steinbauer, L. Sinawehl, R. Liska, S. Baudis:
"Photopolymerizable Adhesives For Bone Fracture Fixation";
Vortrag: The 6th (virtual) European Symposium of Photopolymer Science,
Wien;
15.06.2021
- 17.06.2021; in: "vESPS 2021",
(2021),
ISBN: 978-3-9504809-3-1;
S. 126.
J. Steindl, K. Ehrmann, C. Gorsche, C. Huang, T. Koch, P. Steinbauer, A. Rohatschek, O.G. Andriotis, P.J. Thurner, J. Stampfl, R. Liska:
"Maleimide-Styrene-Butadiene Terpolymers As Tough Photopolymers For Additive Manufacturing";
Vortrag: The 6th (virtual) European Symposium of Photopolymer Science,
Wien;
15.06.2021
- 17.06.2021; in: "vESPS 2021",
(2021),
ISBN: 978-3-9504809-3-1;
S. 92.
B. Steyrer, R. Liska, J. Stampfl:
"Thermoplasts as Toughening Agent for 3D-Printable Photopolymers";
Vortrag: DVSPM 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017 DVSPM",
Book-of-Abstracts.com,
Gumpoldskirchen-Austria
(2017),
ISBN: 978-3-9504017-6-9;
S. OP-4.
M. Susec, S. Ligon, R. Liska, P. Krajnc:
"Acrylate and thiol based highly porous polymers by emulsion templating : lecture at Third International Symposium Frontiers polymer science in association with the journal polymer";
Poster: Third International Symposium Frontiers polymer science in association with the journal polymer,
Sitges;
21.05.2013
- 23.05.2013; in: "Programme Booklet",
(2013).
M. Susec, S. Ligon, R. Liska, P. Krajnc:
"Influence of initiator and solvent on porous structure of biocompatible polymers";
Vortrag: 2nd Conference on Applied Biocatalysis and 7th Meeting of Students and University Professors from Maribor and Zagreb,
Maribor;
07.11.2011
- 08.11.2011; in: "Book of Abstracts",
M. Leitgeb, M. Primozic (Hrg.);
(2011).
M. Susec, S. Ligon, R. Liska, P. Krajnc:
"Photopolymerised microcellular polyesters from high internal phase emulsions";
Poster: Iupac Macro 2012,
Blacksburg;
24.06.2012
- 29.06.2012; in: "Extended Abstracts",
(2012).
M. Susec, S. Ligon, R. Liska, P. Krajnc:
"Photostructured Microcellular Polyesters from High Internal Phase Emulsions";
Vortrag: EUPOC 2012 - Porous PolymerBased Systems: From Design to Application,
Gargnano, Italy;
03.06.2012
- 07.06.2012; in: "EUPOC 2012 - Porous PolymerBased Systems: From Design to Application",
(2012),
S. 9.
M. Susec, S. Ligon, R. Liska, P. Krajnc:
"Preparation of biocompatible porous polymers from multifunctional acrylates";
Vortrag: 1st International Workshop of CoE PoliMat,
Ljubljana;
01.12.2011
- 02.12.2011; in: "Contributions to the working session with the international scientific council",
(2011),
S. 45
- 47.
M. Susec, S. Ligon, J. Stampfl, R. Liska, P. Krajnc:
"Stereolithography with hierarchical polymers based on high internal phase emulsions";
Poster: European Symposium of Photopolymer Science - ESPS 2012,
Torino;
04.09.2012
- 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts",
(2012),
S. 20.
M. Susec, R. Liska, P. Krajnc:
"Priprava biozdruzljivih poroznih polimerov iz multifunkcionalnih akrilatov = Preparation of biocompatible porous polymers from multifunctional acrylates";
Poster: Slovenski kemijski dnevi 2011,
Portoroz;
14.09.2011
- 16.09.2011; in: "Abstracts",
(2011).
M. Susec, R. Liska, P. Krajnc:
"Thiol-ene chemistry and emulsion templating for microcellular open porous polymer preparation";
Poster: Austrian - Slovenian Polymer Meeting - ASPM 2013,
Bled;
03.05.2013
- 05.05.2013; in: "The Proceedings of the Austrian - Slovenian Polymer Meeting - ASPM 2013",
M. Zigon, T. Rajsp (Hrg.);
(2013),
978‐961‐269‐992‐5;
307 S.
M. Susec, R. Liska, S. Ligon, P. Krajnc:
"Hierarchically porous polymers from divinyladipate and thiols via emulsion templating";
Poster: 5th Biomaterialsymposium,
Vienna;
19.11.2012
- 21.11.2012; in: "Abstracts",
J. Stampfl (Hrg.);
(2012),
S. 83.
M. Susec, R. Liska, I. Pulko, P. Krajnc:
"Tiol-en klik polimerizacije v makro emulzijah";
Poster: Slovenski kemijski dnevi 2012,
Portoroz;
12.09.2012
- 14.09.2012; in: "Slovenski kemijski dnevi 2012",
Z. Kravanja, D. Brodnjak-Voncina, M. Bogataj (Hrg.);
(2012),
ISBN: 978-961-248-353-1.
H. Svajdlenková, O. Sausa, C. Gorsche, R. Liska:
"Micro structural pals study of dimethacrylate networks";
Vortrag: DVSPM 2015,
Gmunden;
11.05.2015
- 13.05.2015; in: "Proceedings of a Conference on Polymer Science",
(2015),
ISBN: 978-3-99033-491-1;
S. 75.
H. Svajdlenková, O. Sausa, G. Peer, C. Gorsche, R. Liska:
"Insight into microstructure of photopolymers by means of positron annihilation lifetime spectroscopy (PALS)";
Vortrag: European Polymer Congress 2019 (EPF 2019),
Crete, Greece;
09.06.2019
- 14.06.2019; in: "European Polymer Congress 2019 (EPF 2019)",
(2019),
S. 405.
H. Svajdlenková, O. Sausa, M. Selvek, T. Koch, C. Gorsche, R. Liska:
"Free Volume Study of Dimethacrylates by PALS";
Vortrag: Danube Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017",
Book of Abstracts.com,
(2017),
ISBN: 978-3-9504017-6-9;
S. OP-73.
R. Taschner, P. Gauss, P. Knaack, R. Liska:
"α-Ketoesters as non-aromatic photoinitiators for radical polymerization of (meth)acrylates";
Poster: European Polymer Congress 2019 (EPF 2019),
Crete, Greece;
09.06.2019
- 14.06.2019; in: "European Polymer Congress 2019 (EPF 2019)",
(2019),
S. 468.
R. Taschner, P. Gauss, P. Knaack, R. Liska:
"α-Ketoesters as non-aromatic photoinitiators for radical polymerization of (meth)acrylates";
Vortrag: RadTech Europe 2019,
München, Deutschland;
15.10.2019
- 16.10.2019; in: "RadTech Europe 2019",
(2019),
S. 62.
R. Taschner, P. Knaack, R. Liska:
"Bismuth- and pyrylium-based onium salts as initiators for radical induced cationic frontal polymerization";
Vortrag: Polymer Meeting 14,
Graz;
30.08.2021
- 02.09.2021; in: "Polymer Meeting 14 Book of Abstracts",
Verlag der Technischen Universität Graz,
(2021),
ISBN: 978-3-85125-844-8;
S. 82.
R. Taschner, P. Knaack, R. Liska:
"Radical Induced Cationic Frontal Polymerization Of Epoxides Using Bismuthonium-And Pyrylium-Salts";
Vortrag: The 6th (virtual) European Symposium of Photopolymer Science,
Wien;
15.06.2021
- 17.06.2021; in: "vESPS 2021",
(2021),
ISBN: 978-3-9504809-3-1;
S. 116.
P. Tesavibul, J. Patzer, R. Felzmann, R. Liska, J. Stampfl:
"Customized ceramic implants made by lithography based additive manufacturing";
Poster: 4. Wiener Biomaterialsymposium,
Wien;
15.11.2010
- 17.11.2010; in: "Tagungsband",
J. Stampfl (Hrg.);
(2010),
S. 25.
Z. Tomasikova, B. Husar, X.H. Qin, P. Gruber, M. Markovic, A. Ovsianikov, R. Liska:
"Hyaluronic acid based hydrogels for two photon lithography";
Vortrag: DVSPM 2015,
Gmunden;
11.05.2015
- 13.05.2015; in: "Proceedings of a Conference on Polymer Science",
(2015),
ISBN: 978-3-99033-491-1;
S. 59.
Z. Tomasikova, X.H. Qin, P. Gauss, R. Liska:
"3D Printing of biocompatible hydrogels";
Vortrag: 79PMM,
Prague;
28.06.2015
- 02.07.2015; in: "79th Prague Meeting on Macromolecules",
(2015),
ISBN: 978-80-85009-82-8.
Z. Tomasikova, X.H. Qin, B. Husar, P. Gruber, B. Plochberger, M. Markovic, A. Ovsianikov, J. Stampfl, R. Liska:
"Hyaluronic Acid-Based Hydrogels For Two-Photon Polymerisation Applications";
Poster: ESPS 2014,
Vienna;
09.09.2014
- 12.09.2014; in: "3rd European Symposium of Photopolymer Science",
(2014),
ISBN: 978-3-9502992-9-8;
S. 219.
Z. Tomasikova, X.H. Qin, B. Husar, P. Gruber, B. Plochberger, M. Markovic, A. Ovsianikov, J. Stampfl, R. Liska:
"Two-photon polymerisation of hyaluronic acid-based hydrogels for tissue engineering";
Vortrag: 5th Bratislava Young Polymer Scientists Workshop BYPoS,
Zázrivá;
16.06.2014
- 20.06.2014; in: "BYPoS workshop book",
book of abstracts,
(2014),
ISBN: 978-80-970923-5-1;
S. 91.
J. Torgersen, A. Baudrimont, N.U Pucher, K. Stadlmann, K. Cicha, C. Heller, R. Liska, J. Stampfl:
"In Vivo Nanostructuring of Biocompatible Materials";
Poster: BioNanoMed 2010,
Krems a.d. Donau;
02.11.2010
- 03.11.2010; in: "BioNanoMed 2010",
(2010),
S. 12.
J. Torgersen, A. Baudrimont, N.U Pucher, K. Stadlmann, K. Cicha, C. Heller, R. Liska, J. Stampfl:
"In Vivo Scaffold Fabrication";
Poster: ESAO-ASAIO Winter School 2011,
Semmering;
26.01.2011
- 29.01.2011; in: "Advancing Roles: Biomaterials in Artificial Organs and Regenerative Medicine",
D. Falkenhagen, E. F. Leonard, S. Mikhalovsky (Hrg.);
(2011),
S. 70.
J. Torgersen, A. Baudrimont, N.U Pucher, K. Stadlmann, K. Cicha, C. Heller, R. Liska, J. Stampfl:
"In Vivo Writing using Two-Photon-Polymerization";
Vortrag: 11th International Symposium on Laser Precision Microfabrication, LPM 2010,
Stuttgart, D;
07.06.2010
- 10.06.2010; in: "Proceedings of LPM2010",
K. Sugioka (Hrg.);
(2010),
S. #10-42.
J. Torgersen, A. Baudrimont, N.U Pucher, K. Stadlmann, K. Cicha, C. Heller, R. Liska, J. Stampfl:
"In-Vivo-Writing mittels Zweiphotonenlithographie";
Vortrag: 4. Wiener Biomaterialsymposium,
Wien;
15.11.2010
- 17.11.2010; in: "Tagungsband- 4. Wiener Biomaterialsymposium",
(2010),
S. 24.
J. Torgersen, A. Baudrimont, N.U Pucher, K. Stadlmann, K. Cicha, C. Heller, J. Stampfl, R. Liska:
"Poster F5-64 In-Vivo Writing using Two-Photon-Polymerization as Enabling Technology for Making Use of Bio-inspired Structures";
Poster: Materials science and engineering MSE 2010,
Darmstadt;
24.08.2010
- 26.08.2010; in: "Tagungsband Material science and engineering 2010",
(2010),
S. 45.
J. Torgersen, A. Baudrimont, N.U Pucher, K. Stadlmann, C. Heller, R. Liska, J. Stampfl:
"Biocompatible Materials structured in-vivo using high-resolution AMT";
Vortrag: Euro Biomat,
Jena;
13.04.2011
- 14.04.2011; in: "Euro Biomat - European Symposium on Biomaterials and Related Areas",
22
(2011),
S. 18.
J. Torgersen, A. Ovsianikov, V. Mironov, N.U Pucher, X.H. Qin, K. Cicha, Z. Li, T. Machacek, V. Jantsch-Plunger, R. Liska, J. Stampfl:
"Biocompatible Hydrogels for the Three-dimensional Micro-fabrication of Extracellular Environments";
Vortrag: Bio-inspired Materials,
Potsdam;
20.03.2012
- 23.03.2012; in: "Bio-inspired Materials International School and Conference on Biological Materials Science",
DGM Programme,
(2012),
S. 20.
A.D. Tran, N. Klikovits, P. Knaack, R. Liska:
"Radical induced cationic frontal polymerization for epoxy-composites";
Poster: 5th European Symposium of Photopolymer Science,
Mulhouse, France;
03.09.2018
- 06.09.2018; in: "5th European Symposium of Photopolymer Science",
5th European Symposium of Photopolymer Science,
(2018),
S. PO47.
A.D. Tran, P. Knaack, N. Klikovits, R. Liska:
"Radical Induced Cationic Frontal Polymerization of Epoxy System";
Vortrag: VSS 2019 - Vienna Young Scientists Symposium,
Wien;
13.06.2019
- 14.06.2019; in: "Tagungsband_VSS2019_1906042202",
(2019),
ISBN: 978-3-9504017-9-0;
S. 202
- 203.
A.D. Tran, P. Knaack, N. Klikovits, R. Liska:
"Radical induced cationic frontal polymerizationfor epoxy-composites";
Vortrag: ICCST 12th International Conference on Composite Science and Technology,
Sorrento, Italy;
08.05.2019
- 10.05.2019; in: "ICCST 12th International Conference on Composite Science and Technology",
(2019),
S. 53.
M. Tromayer, P. Gruber, A. Ajami, A. Rosspeintner, S. Naumov, A. Ovsianikov, J. Stampfl, R. Liska:
"Synthesis And Characterization Of Aminostyryl-1,3,5-Triazines As Initiators For Two-Photon Induced Polymerization";
Poster: ESPS 2014,
Vienna;
09.09.2014
- 12.09.2014; in: "3rd European Symposium of Photopolymer Science",
(2014),
ISBN: 978-3-9502992-9-8;
S. 220.
M. Tromayer, P. Gruber, K. Hölzl, M. Markovic, S. Vlierberghe, A. Ovsianikov, P. Dubruel, J. Stampfl, R. Liska:
"Hyaluronan-Based Two-Photon Initiator with Enhanced Biocompatibility";
Poster: 10th World Biomaterials Congress,
Montreal, Canada;
17.05.2016
- 22.05.2016; in: "Book of Abstracts",
(2016),
S. 1807.
M. Tromayer, Z. Li, J. Torgersen, A. Ajami, A. Rosspeintner, S. Naumov, R. Liska:
"Preparation and characterization of novel type I/ type II photoinitiators for two-photon submicro-stereolithography";
Poster: Austrian - Slovenian Polymer Meeting - ASPM 2013,
Bled;
03.05.2013
- 05.05.2013; in: "The Proceedings of the Austrian - Slovenian Polymer Meeting - ASPM 2013",
M. Zigon, T. Rajsp (Hrg.);
(2013),
978‐961‐269‐992‐5;
307 S.
M. Tromayer, Z. Li, J. Torgersen, A. Ajami, A. Rosspeintner, S. Naumov, T. Scherzer, A. Ovsianikov, R. Liska:
"Novel Highly Efficient Initiators For Two-Photon Induced Photopolimerization";
Vortrag: RadTech Europe 2013,
Basel;
15.10.2013
- 17.10.2013; in: "Abstract Book",
(2013),
S. 40.
M. Tromayer, M. Markovic, P. Gruber, K. Hölzl, W. Steiger, S. Naumov, T. Scherzer, J. Stampfl, A. Ovsianikov, R. Liska:
"Novel Two-Photon Initiators Based on Cleavable Diazosulfones";
Poster: 4th European Symposium of Photopolymer Science,
Leipzig;
11.09.2016
- 14.09.2016; in: "ESPS 2016",
(2016),
S. P-21.
M. Tromayer, M. Markovic, P. Gruber, K. Hölzl, P. Vlierberghe, P. Dubruel, J. Stampfl, A. Ovsianikov, R. Liska:
"Novel biocompatible two-photon initiator based on hyaluronan";
Poster: TERMIS-EU 2016 conference,
Uppsala, Sweden;
28.06.2016
- 01.07.2016; in: "TERMIS-EU 2016 conference",
European Cells&Materials Journal,
Vol. 31. Suppl. 1, 2016
(2016),
ISSN: 1473-2262;
S. 481.
M. Tromayer, M. Markovic, P. Gruber, K. Hölzl, S. Vlierberghe, P. Dubruel, J. Stampfl, A. Ovsianikov, R. Liska:
"Biocompatible Two-Photon Initiator with Hyaluronan Backbone";
Poster: 4th European Symposium of Photopolymer Science,
Leipzig;
11.09.2016
- 14.09.2016; in: "ESPS 2016",
(2016),
S. P-37.
M. Tromayer, A. Mautner, B. Husar, C. Heller, F. Varga, T. Koch, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"Vinyl carbonates with improved mechanical properties";
Poster: RadTech Europe 2013,
Basel;
15.10.2013
- 17.10.2013; in: "Abstract Book",
(2013),
S. 120.
C. Turecek, M. Schuster, S. Baudis, R. Liska, J. Stampfl, F. Varga:
"Evaluation of biophotopolymers for bone replacement materials capabe for rapid prototyping";
Poster: XXXIV ESAO Congress,
Krems, A;
05.09.2007
- 08.09.2007; in: "The International Journal of Artificial Organs, Abstracts of the XXXIV ESAO Congress",
D. Falkenhagen (Hrg.);
The International Journal of Artificial Organs,
30 (8)
(2007),
ISSN: 0391-3988;
S. 723.
G. Ullrich, D. Herzog, R. Liska, H. Gruber, P. Burtscher, N. Moszner:
"Synthesis and photoactivity of new camphorquinone derivatives";
Poster: 6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium,
Vienna, Austria;
15.09.2003
- 17.09.2003; in: "6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium ",
(2003),
S. 131.
T. Verdianz, R. Liska, H. Gruber, H. Simburger:
"Surface modification of polyimides for electric motor manufacture";
Poster: 6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium,
Vienna, Austria;
15.09.2003
- 17.09.2003; in: "6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium ",
(2003),
S. 165.
T. Verdianz, M. Schuster, M. Rumpler, C. Turecek, F. Varga, J. Stampfl, R. Liska:
"Biophotopolymers for rapid prototyping of cellular bone replacement materials";
Poster: European Polymer Congress 2005,
Moskau, Russland;
27.06.2005
- 01.07.2005; in: "CD European Polymer Congress 2005",
(2005),
Paper-Nr. P4.4.18 Ref.2290,
2 S.
T. Verdianz, H. Simbürger, H. Gruber, R. Liska:
"Surface modification of polyimides with co-reactive and catalytic groups";
Poster: European Polymer Congress 2005,
Moskau, Russland;
27.06.2005
- 01.07.2005; in: "CD European Polymer Congress 2005",
(2005),
Paper-Nr. P1.2-60 Ref.2295,
2 S.
L. Vojtova, E. Habankova, L. Michlovska, R. Liska, J. Jancar, S. Baudis:
"Hybrid Hydrogel's Network Formed by Photogelation of Thermosensitive Macromonomer in Aquateous Environment";
Poster: Danube Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017",
Book of Abstracts.com,
(2017),
ISBN: 978-3-9504017-6-9;
S. PO-28.
A. Wilke, S. Baudis, H. Wilhelm, H. Bergmeister, F. Nehl, R. Liska, J. Stampfl:
"Additive Manufactured Photoelastomers as Tailor-made Biomaterials for Vascular Tissue Restoration";
Vortrag: Euromat 2011,
Montpellier;
12.09.2011
- 15.09.2011; in: "Euromat 2011 Montpellier",
(2011),
S. 0264-1-1.
R. Wolff, P. Knaack, K. Ehrmann, R. Liska:
"3d Printing Of Pure Phenolic Resins By Hot Lithography";
Vortrag: The 6th (virtual) European Symposium of Photopolymer Science,
Wien;
15.06.2021
- 17.06.2021; in: "vESPS 2021",
(2021),
ISBN: 978-3-9504809-3-1;
S. 97.
R. Wolff, P. Knaack, K. Ehrmann, R. Liska:
"3D printing of pure phenolic resins by hot lithography";
Vortrag: Polymer Meeting 14,
Graz;
30.08.2021
- 02.09.2021; in: "Polymer Meeting 14 Book of Abstracts",
Verlag der Technischen Universität Graz,
(2021),
ISBN: 978-3-85125-844-8;
S. 72.
D. Wottawa, M. Mitterbauer, P. Knaack, R. Liska:
"Thermal initiators for cationic frontal polymerization";
Vortrag: The 6th (virtual) European Symposium of Photopolymer Science,
Wien;
15.06.2021
- 17.06.2021; in: "vESPS 2021",
(2021),
ISBN: 978-3-9504809-3-1;
S. 117.
H. Wutzel, C. Dworak, R. Tiefenthaler, J. Lagref, R. Frantz, Z. Cherkaoui, R. Liska:
"Ionic liquids for radical photopolymerization";
Poster: European Symposium of Photopolymer Science - ESPS 2012,
Torino;
04.09.2012
- 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts",
(2012),
S. 22.
H. Wutzel, A. Gugg, N. Moszner, R. Liska:
"Chain transfer reagents for molecular weight control in radical photo-polymerization";
Poster: UPAC 9th International Conference on Advanced Polymers via Macromolecular Engineering (APME 2011),
Cappadocia, TR;
05.09.2011
- 08.09.2011; in: "IUPAC 9th International Conference on Advanced Polymers via Macromolecular Engineering (APME 2011) - Program and Abstract Book",
(2011),
S. 260.
H. Wutzel, J. Kumpfmüller, K. Stadlmann, Z. Li, J. Stampfl, R. Liska:
"Silicon-based waveguides via two-photon induced thiol-ene polymerization";
Vortrag: European Symposium of Photopolymer Science - ESPS 2012,
Torino;
04.09.2012
- 07.09.2012; in: "European Symposium of Photopolymer Science",
(2012).
H. Wutzel, S. Ligon, B. Husar, C. Dworak, H. Hoffmann, R. Liska:
"Comparison of different chemical strategies to overcome oxygen-inhibition in LED-curing of thin films assessed by IR-spectroscopy";
Poster: UPAC 9th International Conference on Advanced Polymers via Macromolecular Engineering (APME 2011),
Cappadocia, TR;
05.09.2011
- 08.09.2011; in: "IUPAC 9th International Conference on Advanced Polymers via Macromolecular Engineering (APME 2011) - Program and Abstract Book",
(2011),
S. 257.
H. Wutzel, A. Mautner, X.H. Qin, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"New monomers based on vinylcarbonates for biomedical applications";
Poster: European Symposium of Photopolymer Science - ESPS 2012,
Torino;
04.09.2012
- 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts",
(2012),
S. 23.
E. Zerobin, S. Baudis, Z. Tomasikova, X.H. Qin, M. Markovic, P. Gruber, J. Stampfl, A. Ovsianikov, R. Liska:
"High Resolved Biocompatible Hydrogel Constructs based on Hyaluronic Acid";
Poster: 4th European Symposium of Photopolymer Science,
Leipzig;
11.09.2016
- 14.09.2016; in: "ESPS 2016",
(2016),
S. P-34.
E. Zerobin, S. Baudis, Z. Tomasikova, X.H. Qin, M. Markovic, P. Gruber, J. Stampfl, A. Ovsianikov, R. Liska:
"Micro fabrication of hydrogels based on hyaluronic acid";
Vortrag: 6th Bratislava Young Polymer Scientists Workshop,
High Tatras, Slovakia;
14.03.2016
- 18.03.2016; in: "BYPoS Workshop book",
book of abstracts,
(2016),
ISBN: 978-80-970923-8-2;
S. 107.
E. Zerobin, W. Steiger, M. Markovic, S. Baudis, A. Ovsianikov, R. Liska:
"Molecular Design Towards Novel Photo-Initiators with Increased Two-Photon Absorption Cross Section";
Vortrag: VSS 2018 - Vienna Young Scientists Symposium,
Wien;
07.06.2018
- 08.06.2018; in: "VSS 2018",
Book-of-Abstracts.com,
(2018),
ISBN: 978-3-9504017-8-3;
S. 106
- 107.
E. Zerobin, M. Tromayer, A. Dobos, W. Steiger, M. Markovic, S. Baudis, A. Ovsianikov, R. Liska:
"Molecular Design towards Two-Photon Initiators with Reduced Phototoxicity";
Poster: 5th European Symposium of Photopolymer Science,
Mulhouse, France;
03.09.2018
- 06.09.2018; in: "5th European Symposium of Photopolymer Science",
5th European Symposium of Photopolymer Science,
(2018),
S. P50.
E. Zerobin, M. Tromayer, A. Dobos, W. Steiger, M. Markovic, S. Baudis, A. Ovsianikov, R. Liska:
"Promoting Initiation-Efficiency and Biocompatibility of Two-Photon Initiators by the Introduction of Photolabile Moieties";
Poster: Symposium 'BSTE 2018: Next Generation Tissue Engineering',
Ghent, Belgien;
21.11.2018
- 23.11.2018; in: "BSTE 2018: Next Generation Tissue Engineering",
(2018),
S. PO43.
E. Zerobin, M. Tromayer, P. Gruber, M. Markovic, S. Baudis, J. Stampfl, A. Ovsianikov, R. Liska:
"Newly Developed Hydrogel Precursors and Two-Photon Initiators Based on Hyaluronic Acid";
Vortrag: AMBA 2017, Advanced Materials for Biomedical Applications,
Ghent, Belgium;
27.09.2017
- 29.09.2017; in: "AMBA 2017, Advanced Materials for Biomedical Applications",
(2017),
S. 62.
E. Zerobin, M. Tromayer, P. Gruber, M. Markovic, S. Baudis, J. Stampfl, A. Ovsianikov, R. Liska:
"Two-Photon Initiator Development and Hydrogel Networks Based on Hyaluronic Acid";
Vortrag: Danube Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017",
Book of Abstracts.com,
(2017),
ISBN: 978-3-9504017-6-9;
S. OP-32.
L. Zhiquan, M. Siklos, N.U Pucher, K. Cicha, A. Ajami, W. Husinsky, J. Stampfl, R. Liska:
"Synthesis and structure-activity relationship of serveral keton-based two-photon initiators";
Poster: European Symposium of Photopolymer Science,
Mulhouse, France;
28.11.2010
- 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book",
(2010).
N. Zwirchmayr, P. Potzmann, C. Grasl, T. Koch, H. Bergmeister, R. Liska:
"Segmented linear thermoplastic urethane elastomers with novel building blocks for electrospinning of vascular grafts";
Vortrag: 5th Bratislava Young Polymer Scientists Workshop BYPoS,
Zázrivá;
16.06.2014
- 20.06.2014; in: "BYPoS workshop book",
book of abstracts,
(2014),
ISBN: 978-80-970923-5-1;
S. 93.
Vorträge und Posterpräsentationen (ohne Tagungsband-Eintrag)
S. Baudis, R. Liska:
"Advanced Photopolymers for High Resolution Addtive Manufacturing";
Vortrag: ADD+IT 2015,
Linz (eingeladen);
10.09.2015
- 11.09.2015.
S. Baudis, S. Orman, A. Mautner, M. Schwentenwein, G. Russmüller, J. Stampfl, R. Liska:
"Biocompatible, tough photopolymers as 3D printed constructs for bone regeneration";
Poster: 1st TERMIS-EU WORKSHOP in collaboration with ISBF "3D Printing in Musculoskeletal Tissue Engineering",
Poland, Warsaw;
22.03.2018
- 23.03.2018.
S. Baudis, T. Pulka, B. Steyrer, H. Wilhelm, G. Weigel, H. Bergmeister, J. Stampfl, R. Liska:
"3D-printing of Urethane-based Photoelastomers for Vascular Tissue Regeneration";
Vortrag: MRS Fall Meeting 2009,
Boston, MA, USA;
30.11.2009
- 03.12.2009.
S. Baudis, Z. Tomasikova, X.H. Qin, P. Gruber, M. Markovic, J. Stampfl, A. Ovsianikov, R. Liska:
"Cell Encapsulation by Microfabrication with Hyaluronic Acid based Hydrogel Precursors";
Poster: International Conference on Biofabrication 2015,
Domplein 29, 3512 JE Utrecht;
07.11.2015
- 09.11.2015.
S. Benedikt, K. Dietliker, H. Grützmacher, M. Markovic, N. Moszner, A. Ovsianikov, R. Liska:
"Characterization and Comparison of Next Generation Water-Soluble Photoinitiators";
Poster: International Conference on Biofabrication 2015,
Utrecht, Netherlands;
07.11.2015
- 09.11.2015.
D. Bomze, V. Schwarz, B. Husar, X.H. Qin, P. Gruber, A. Ovsianikov, J. Stampfl, R. Liska:
"Novel low-toxic PVA based hydrogel precursors for tissue engineering based on thiol-ene crosslinking";
Poster: P2M Winter School,
Zakopane;
13.01.2014
- 17.01.2014.
K. Cicha, Z. Li, K. Stadlmann, J. Torgersen, R. Markut-Kohl, R. Liska, J. Stampfl:
"Fabrication and evaluation of 3D-micro-structures produced using two-photon-induced photopolymerization (TPIP or 2PP) by means of optical assessment and FTIR-spectroscopy";
Vortrag: 16. Tagung Festkörperanalytik,
Wien;
04.07.2011
- 06.07.2011.
B. Dellago, T. Geyer, R. Liska, S. Baudis:
"Biodegradable photopolymers based on acetal building blocks as artificial bone grafts";
Vortrag: ViCEM - Vienna Center for Engineering in Medicine - Biennial Meeting 2019,
Wien;
14.11.2019
- 15.11.2019.
P. Dorfinger, R. Liska, J. Stampfl:
"Toughening of Photopolymers for Stereolithography (SL)";
Vortrag: Polymer Processing Society Conference 2015,
Graz;
21.09.2015
- 25.09.2015.
K. Ehrmann, C. Dworak, K. Seidler, P. Potzmann, C. Grasl, H. Bergmeister, S. Baudis, B. Podesser, R. Liska:
"Biodegradable Thermoplastic Polyurethane Polymers for their Application as Electrospun Artificial Blood Vessels";
Poster: 1st Vienna Polymer-Group Symposium,
Wien;
27.02.2018.
K. Ehrmann, C. Grasl, H. Bergmeister, H. Schima, B. Podesser, R. Liska, S. Baudis:
"From Building Blocks to a Biodegradable & Stable Vascular Graft";
Vortrag: 43. Seminar der Österreichischen Gesellschaft für Chirurgische Forschung,
Wien;
14.11.2019
- 16.11.2019.
K. Ehrmann, C. Grasl, M. Eilenberg, S. Rohringer, H. Bergmeister, B. Podesser, H. Schima, R. Liska, S. Baudis, P. Schwarzl:
"Development of Thermoplastic Elastomers for Vascular Tissue Regeneration";
Vortrag: ViCEM - Vienna Center for Engineering in Medicine - Biennial Meeting 2019,
Wien;
14.11.2019
- 15.11.2019.
C. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"Fabrication of bio-inspired ceramic composites";
Poster: Junior Euromat 2004,
Lausanne, Switzerland;
06.09.2004
- 09.09.2004.
C. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"Fabrication of bio-inspired ceramic composites";
Poster: Micro-mechanical properties of biomaterials, ECI-Conference,
Tomar, Portugal;
26.09.2004
- 30.09.2004.
Ch. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"Fabrication of bio-inspired ceramic composites";
Poster: Micro-Mechanical Properties of Biomaterials,
Tomar, Portugal;
26.09.2004
- 30.09.2004.
N. Fuß, R. Liska:
"New Enon- and Inon-besed Type I Photoinitiators";
Poster: 5. Österreichische Polymertage,
Leoben;
12.09.2001
- 14.09.2001.
N. Fuß, R. Liska:
"New type I photoinitiators based on ynone derivatives";
Poster: RadTech Europe 2001,
Basel, Schweiz;
08.10.2001
- 10.10.2001.
S. Gäbler, T. Koch, J. Stampfl, S. Seidler, C. Heller, S. Baudis, R. Liska, R. Weidisch:
"Determination of the Viscoelastic Properties of Hydrogels based on Polyethylene Glycol Diacrylate (PEG-DA)";
Poster: Materials Science and Engineering - MSE 2008,
Nürnberg;
01.09.2008
- 04.09.2008.
R. Gmeiner, B. Steyrer, A. Samusjew, A. Mautner, R. Liska, J. Stampfl:
"Stereolithographic Manufacturing of Biodegradable Photopolymers";
Poster: Polymer Processing Society Conference 2015,
Graz;
21.09.2015
- 25.09.2015.
C. Gorsche, M. Griesser, C. Hametner, B. Ganster, N. Moszner, D. Neshchadin, A. Rosspeintner, G. Gescheidt, R. Saf, R. Liska:
"New generation of highly efficient long-wavelength photoinitiators for dental restoratives: From research to application";
Vortrag: RadTech USA 2014,
Chicago (Rosemont);
12.05.2014
- 14.05.2014.
C. Gorsche, M. Griesser, T. Koch, N. Moszner, R. Liska:
"The potential of β-allyl sulfone-based dimethacrylate networks";
Poster: ESF Research Networking Programme on Precision Polymer Materials (P2M), Lacanau,
Lacanau;
26.05.2015
- 29.05.2015.
P. Gruber, M. Markovic, K. Hölzl, M. Tromayer, S. van Vlierberghe, P. Dubruel, R. Liska, J. Stampfl, A. Ovsianikov:
"Laser Photofabrication of Cell-Containing Hydrogel Constructs";
Poster: 3rd European Symposium of Photopolymer Science,
Vienna;
09.09.2014
- 12.09.2014.
A. Gugg, B. Ganster, N. Moszner, R. Liska:
"Dental Composite Materials Based on Visible Light Photopolymerization.";
Poster: MRS Fall Meeting 2009,
Boston, MA, USA;
30.11.2009
- 03.12.2009.
A. Gugg, C. Gorsche, N. Moszner, R. Liska:
"Addition fragmentation chain transfer agents for controlled radical photopolymerization";
Poster: ESF Research Networking Programme on Precision Polymer Materials (P2M),
San Feliu de Guixols;
24.09.2012
- 28.09.2012.
G. Harakaly, M. Kury, C. Gorsche, K. Seidler, H. Reghunathan, P. Dorfinger, T. Koch, J. Stampfl, N. Moszner, R. Liska:
"Addition fragmentation chain transfer agents for formation of tough photopolymer network in 3D printing applications";
Poster: Workshop Additive manufacturing as a tool to create life in 3D,
Brno;
26.07.2017
- 27.07.2017.
S. Helfert, C. Dworak, E. Sevcsik, H. Peterlik, M. Sauer, D. Ret, R. Liska:
"Synthesis and Characterization of Polymer Linker Systems for T-cell Investigations";
Poster: Workshop Additive manufacturing as a tool to create life in 3D,
Brno;
26.07.2017
- 27.07.2017.
C. Heller, C. Dworak, R. Liska, F. Varga:
"Biocompatible Phorphorus-based Monomers for Radical Polymerization";
Poster: MRS Fall Meeting 2009,
Boston, MA, USA;
30.11.2009
- 03.12.2009.
C. Heller, M. Schwentenwein, J. Stampfl, F. Varga, R. Liska, M. Porodec, M. Schulz-Siegmund, G. Russmüller:
"Additive Manufacturing Technologies for the 3D Fabrication of Biocompatible and Biodegradable Photopolymers.";
Vortrag: MRS Fall Meeting 2009,
Boston, MA, USA;
30.11.2009
- 03.12.2009.
D. Herzog, R. Liska:
"Electron poor heterocyclic type I photoinitiators";
Poster: RadTech Europe 2001,
Basel, Schweiz;
08.10.2001
- 10.10.2001.
D. Herzog, R. Liska:
"New concepts for Type I Photoinitiators in Free Radical Polymerization";
Vortrag: 5. Österreichische Polymertage,
Leoben;
12.09.2001
- 14.09.2001.
B. Husar, S. Ligon, H. Wutzel, H. Hoffmann, R. Liska:
"Experimental Comparison of Various Anti-Oxygen Inhibition Strategies in LED Curing";
Vortrag: RadTech USA 2014,
Chicago (Rosemont);
12.05.2014
- 14.05.2014.
B. Husar, A. Mautner, C. Heller, M. Schwentenwein, F. Varga, T. Koch, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"Utilization of photopolymerization of new low toxic vinyl monomers in bone tissue engineering";
Poster: The 3rd TERMIS World Congress 2012,
Vienna;
05.09.2012
- 08.09.2012.
B. Husar, A. Mautner, C. Heller, M. Schwentenwein, F. Varga, T. Koch, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"Vinyl esters and vinyl carbonates: low cytotoxic alternatives to (meth)acrylates";
Poster: ESF Research Networking Programme on Precision Polymer Materials (P2M),
San Feliu de Guixols;
24.09.2012
- 28.09.2012.
B. Husar, A. Mautner, F. Varga, J. Stampfl, R. Liska:
"An overview on low cytotoxic alternatives to (meth)acrylates: vinyl esters and vinyl carbonates";
Vortrag: RadTech USA 2014,
Chicago (Rosemont);
12.05.2014
- 14.05.2014.
R. Inführ, C. Fritscher, V. Schmidt, L. Kuna, R. Liska, H. Lichtenegger, J. Stampfl:
"Structuring Methods Capable of Building 3D Parts with Feature Resolutions from 50 µm to 100 nm";
Poster: Junior Euromat 2006,
Lausanne, Switzerland;
04.09.2006
- 06.09.2006.
R. Inführ, Ch. Fritscher, V. Schmidt, L. Kuna, R. Liska, H. Lichtenegger, J. Stampfl:
"Structuring Methods Capable of Building 3D Parts with Feature Resolutions from 50 µm to 100 nm";
Poster: Junior Euromat,
Lausanne, Switzerland;
04.09.2006
- 08.09.2006.
R. Inführ, R. Liska, H. Lichtenegger, Ch. Fritscher, J. Stampfl, N. Hüsing:
"3D Lithography of Organo-Soluble Mold Materials for Sol-Gel Nanocomposites";
Poster: RadTech Europe 2005,
Barcelona, Spain;
18.10.2005
- 20.10.2005.
R. Inführ, N.U Pucher, C. Heller, H. Lichtenegger, R. Liska, V. Schmidt, L. Kuna, A. Haase, J. Stampfl:
"Functional Polymers Structured by Two Photon Lithography";
Vortrag: EMRS Spring Meeting 2007,
Strasbourg, France;
28.05.2007
- 01.06.2007.
R. Inführ, N.U Pucher, H. Lichtenegger, R. Liska, V. Schmidt, V. Satzinger, J. Stampfl:
"Refractive Index Patterning of Flexible Waveguide Materials by Two-Photon Polymerization";
Poster: Materials Science and Engineering - MSE 2008,
Nürnberg;
01.09.2008
- 04.09.2008.
R. Inführ, J. Stampfl, N. Pucher, H. Lichtenegger, R. Liska, V. Schmidt, L. Kuna, A. Haase:
"Functional Polymers Structured by Two Photon Lithography";
Vortrag: E-MRS European Materials Research Society - Spring Meeting 2007,
Strasbourg/ France;
28.05.2007
- 01.06.2007.
P. Knaack, D. Bomze, N. Klikovits, I. Krossing, R. Liska:
"Radical Induced Cationic Frontal Polymerization";
Vortrag: 3rd International PaCE Christmas Symposium,
University of Vienna;
15.12.2017.
B. Koch, A. Hochwallner, R. Liska, J. Stampfl:
"Ink development for the fabrication of digital materials with increased fracture toughness";
Vortrag: ESIAM,
Online;
08.09.2021
- 10.09.2021.
J. Kollmer, P. Dorfinger, C. Gorsche, R. Liska, J. Stampfl:
"Toughening and coloring of photopolymers for lithography-based 3D-printing";
Vortrag: 6th International Conference on Additive Technologies iCAT 2016,
Nürnberg;
29.11.2016
- 30.11.2016.
J. Kollmer, D. Grunenberg, C. Gorsche, R. Liska, J. Stampfl:
"Lithographiebasierte GF für die Prozessierung hochviskoser Photopolymere";
Poster: Internationale Messe & Konferenz für additive Technologien,
Erfurt;
05.06.2017
- 07.06.2017.
T. Konegger, R. Obmann, G. Mikl, S. Schörpf, R. Liska:
"Freeze casting of porous polysilazane-derived ceramics";
Vortrag: 44th International Conference and Expo on Advanced Ceramics and Composites (ICACC 2020),
Daytona Beach (eingeladen);
26.01.2020
- 31.01.2020.
S. Kopeinig, R. Liska:
"Further Covalently Bonded Photoinitiators";
Poster: RadTech Europe 2005,
Barcelona, Spain;
18.10.2005
- 20.10.2005.
J. Kumpfmüller, R. Inführ, K. Stadlmann, K. Cicha, V. Satzinger, J. Stampfl, R. Liska:
"Flexible Optical WaveGuides via Two-Photon Polymerization";
Poster: Materials Science and Engineering,
Darmstadt, Germany;
24.08.2010
- 26.08.2010.
Z. Li, M. Siklos, N.U Pucher, K. Cicha, A. Ajami, W. Husinsky, J. Stampfl, R. Liska:
"Synthesis and Structure-Activity Relationship of Several Novel Two-Photon Initiators based on a D-pi-A-pi-D Chromophore";
Poster: Materials Science and Engineering,
Darmstadt, Germany;
24.08.2010
- 26.08.2010.
H. Lichtenegger, Ch. Fritscher, J. Stampfl, S. Seidler, N. Hüsing, R. Liska:
"3-D templating of hierarchical materials";
Vortrag: MRS Spring Meeting,
San Francisco;
12.04.2004
- 16.04.2004.
H. Lichtenegger, R. Liska, J. Stampfl:
"STRUCMAT- Materialien für die Strukturierung mit 2-Photonenlithographie (TPA)";
Vortrag: ISOTEC-Kickoff-Meeting,
Reinischkogel, Österreich;
16.06.2005
- 18.06.2005.
H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"Fabrication of bio-inspired ceramic composites";
Poster: EUROMAT 2004,
Lausanne, Schweiz;
06.09.2004
- 09.09.2004.
S. Ligon, M. Griesser, D. Neshchadin, A. Rosspeintner, V. Gorelik, B. Ganster, R. Saf, G. Gescheidt, N. Moszner, R. Liska:
"Advances in long wavelength initiators for photocurable dental adhesives and restoratives";
Poster: RadTech Asia 2013,
Shanghai;
20.05.2013
- 24.05.2013.
S. Ligon, B. Husar, S. Baudis, F. Nehl, A. Nigisch, H. Bergmeister, D. Bernhard, J. Stampfl, R. Liska:
"Improved elastomeric materials for CAD/CAM generation of vascular structures in soft tissue replacement therapies";
Poster: The 3rd TERMIS World Congress 2012,
Vienna;
05.09.2012
- 08.09.2012.
S. Ligon, B. Husar, S. Baudis, K. Seidler, G. Weigel, C. Grasl, H. Bergmeister, R. Liska:
"Electrospun thermoplastic polyurethane vascular grafts with controllable degradation";
Poster: ESF Research Networking Programme on Precision Polymer Materials (P2M),
San Feliu de Guixols;
24.09.2012
- 28.09.2012.
S. Ligon, X.H. Qin, P. Esfandiari, Z. Tomasikova, P. Gruber, A. Ovsianikov, R. Liska:
"Advanced Applications of Thiol-Ene Formulations";
Vortrag: RadTech USA 2014,
Chicago (Rosemont);
12.05.2014
- 14.05.2014.
S. Ligon, M. Tromayer, Z. Li, J. Torgersen, A. Ajami, A. Rosspeintner, S. Naumov, T. Scherzer, J. Stampfl, R. Liska:
"New Developments in Initiators for Two-Photon Polymerization";
Vortrag: RadTech USA 2014,
Chicago (Rosemont);
12.05.2014
- 14.05.2014.
K. Lisak, R. Liska, S. Knaus:
"Photochemical Immobilization of Aryl Azides onto Polypropylene Surfaces";
Vortrag: 5. Österreichische Polymertage,
Leoben;
12.09.2001
- 14.09.2001.
R. Liska:
"3D Printing of a New Generation of Biocompatible and Biodegradable Photopolymers";
Vortrag: Makromolekulares Kolloquium,
Freiburg (eingeladen);
25.02.2015
- 27.02.2015.
R. Liska:
"Advanced Applications of Photopolymerization in the Field of Biomaterials and 3D Printing";
Vortrag: GÖCH Öberösterreich (eingeladen),
Johannes Kepler Universität Linz;
10.05.2016.
R. Liska:
"Advanced Biomaterials for 3D-Photopolymerization";
Vortrag: 1st P2M Networking Conference,
Obernai, F;
11.11.2011
- 14.11.2011.
R. Liska:
"Advanced Monomers and Initiators for radical Photopolymerization";
Vortrag: Institut für Oberflächenmodifizierung,
Leipzig (eingeladen);
26.01.2012.
R. Liska:
"Advanced Photopolymers for Tissue Engineering";
Hauptvortrag: SummerSchool 2015,
Bad Herrenalb (eingeladen);
22.06.2015
- 24.06.2015.
R. Liska:
"Biocompatible Photopolymers";
Vortrag: Firma Objet,
Rehovot, IL;
07.04.2010.
R. Liska:
"Biocompatible Photopolymers for 3D printing";
Hauptvortrag: GDCh Vortrag Hochschule Niederrhein,
Niederrhein;
23.04.2015.
R. Liska:
"Biocompatible Photopolymers: From Synthesis to in Vivo Studies";
Vortrag: University of Maribor,
Maribor (eingeladen);
31.08.2012.
R. Liska:
"Biocompatible polymers in tissue engineering";
Vortrag: Seminar-SoftMatterScience,
Freiburg (eingeladen);
13.05.2014.
R. Liska:
"Biofunctional Photopolymers";
Vortrag: 1. Meeting des erweiterten Clusters für Geweberegeneration 2014,
Vienna;
13.03.2014.
R. Liska:
"Biokompatible Polymere für den 3D‐Druck";
Vortrag: 8. Forschungs‐ & Technologieforum Mostviertel,
Amstetten (eingeladen);
23.09.2014.
R. Liska:
"Biophotopolymere für Rapid Prototyping";
Vortrag: Projektmeeting Fa. ISOTEC,
Reinischkogel, Steiermark;
16.06.2005.
R. Liska:
"Frontal Polymerization and other new concepts in Radical Polymerization";
Vortrag: BASF,
Ludwigshafen, D (eingeladen);
07.08.2012.
R. Liska:
"Frontal Polymerization and other new concepts in Radical Polymerization";
Vortrag: Cytec,
Brüssel (eingeladen);
12.02.2012.
R. Liska:
"Fundamentals in Photopolymerization";
Vortrag: Firma Objet,
Rehovot, IL (eingeladen);
07.04.2011
- 08.04.2011.
R. Liska:
"Fundamentals of Frontal (Photo)polymerization";
Vortrag: PolyComp Annual Meeting 2014,
Leoben (eingeladen);
19.11.2014.
R. Liska:
"Further Projects in the field of Photopolymerization";
Vortrag: Firma Objet,
Rehovot, IL;
07.04.2010.
R. Liska:
"Future Technologies of Polymer Processing: The Chemistry of 3D Printing and Frontal Polymerization";
Vortrag: Slovak Academy of Sciences, Polymer Institute SAS,
Polymer Institute SAS, Bratislava (eingeladen);
03.05.2019.
R. Liska:
"Konzepte und Modifikationen in Typ I und Typ II Photoinitiatoren";
Vortrag: CIBA,
Basel (eingeladen);
21.03.2006.
R. Liska:
"Neue Photopolymere für Rapid Prototyping von zellularen Materialien";
Vortrag: 1. Wiener Biomaterialsymposium,
Wien (eingeladen);
04.11.2004
- 05.11.2004.
R. Liska:
"Neue Polymere für die licht-basierte Generative Fertigung";
Vortrag: Additive Fertigung an der TU Wien-Pilotfabrik Industrie 4.0,
Wien (eingeladen);
22.05.2018.
R. Liska:
"New Concepts in Radical Photopolymerization";
Vortrag: BASF,
Ludwigshafen, D (eingeladen);
15.12.2011.
R. Liska:
"New Monomers and Initiators for Photopolymerisation";
Vortrag: Firma Durst,
Lienz in Osttirol, A (eingeladen);
05.02.2010.
R. Liska:
"New Monomers and Photoinitiators";
Vortrag: Beijing University of Technology,
Beijing, CN (eingeladen);
10.05.2011.
R. Liska:
"Photoinitiatoren mit funktionellen Gruppen";
Vortrag: EMS Chemie,
CH-7013 Domat/Ems (eingeladen);
20.03.2006.
R. Liska:
"Photopolymere - Neue Dentalmaterialien und bioresorbierbarer Knochenersatz";
Vortrag: Informationsveranstaltung: Innovationen für die Medizintechnik,
Tu-Wien, A (eingeladen);
18.04.2007.
R. Liska:
"Photopolymere und ihre Anwendungen";
Vortrag: Technische Universität Graz,
Graz (eingeladen);
08.03.2005.
R. Liska:
"Photopolymerisation mittels Ein- und Zwei Photonen";
Vortrag: Projektmeeting Fa. ISOTEC,
Reinischkogel (eingeladen);
12.07.2007
- 13.07.2007.
R. Liska:
"Photopolymerisation of Biocompatible Materials";
Vortrag: Firma Beiersdorf,
Hamburg, D (eingeladen);
15.04.2010.
R. Liska:
"Photopolymerization and 3D lithography";
Vortrag: ESF Research Networking Programme on Precision Polymer Materials (P2M),
San Feliu de Guixols (eingeladen);
24.09.2012
- 28.09.2012.
R. Liska:
"Photopolymerization and 3D printing";
Vortrag: Slovak Academy of Sciences,
Bratislava (eingeladen);
20.06.2013.
R. Liska:
"Photopolymerization goes 3D";
Vortrag: FoE Advanced Material Science,
Graz;
27.10.2011.
R. Liska:
"Photopolymerization: A long known technique in a modern environment - 3D printing of biomaterials";
Vortrag: 27. Internationales H.F. Mark-Symposium 2013,
Wien (eingeladen);
07.11.2013.
R. Liska:
"Photopolymerization: A long known technique in a modern environment - 3D printing of biomaterials";
Vortrag: Steinhofer-Vorlesung,
Freiburg (eingeladen);
12.05.2014.
R. Liska:
"Photopolymerization: From Biomaterials to 3D Printing";
Vortrag: GDCH Vortrag - Uni Stuttgart 2018,
Stuttgart (eingeladen);
11.01.2018.
R. Liska:
"Photopolymerization: From Biomaterials to 3D Printing";
Vortrag: 7th Meeting on Chemistry and Life 2018,
Brno University of Technology (eingeladen);
12.09.2018
- 14.09.2018.
R. Liska:
"Photopolymers and Rapid Prototyping";
Vortrag: Beijing University of Technology,
Beijing, CN (eingeladen);
10.05.2011.
R. Liska:
"Photopolymers for biomedical applications";
Vortrag: Beijing University of Technology,
Beijing, CN (eingeladen);
10.05.2011.
R. Liska:
"Photopolymers in digital and restorative dentistry";
Vortrag: Christian Doppler Forum,
Bad Blumau (eingeladen);
17.09.2014
- 19.09.2014.
R. Liska:
"Rapid Prototyping von biokompatiblen und bioabbaubaren Kunststoffen für die Geweberegeneration";
Vortrag: VSVA-Symposium,
Wien (eingeladen);
11.11.2013.
R. Liska:
"Recent Advances in Photopolymerisation";
Vortrag: Firma Huntsman,
Basel, CH (eingeladen);
26.11.2009.
R. Liska:
"Recent developments in photoinitiators and photopolymerization";
Vortrag: Universität Mulhouse,
F-68093 Mulhouse (eingeladen);
22.03.2006.
R. Liska:
"Robert Liska, Photoinitiators and Monomers for Medical Applications";
Vortrag: Photopolymerization Fundamentals 2009,
Breckenridge, CO, USA (eingeladen);
21.06.2009
- 24.06.2009.
R. Liska:
"Smart Photopolymers: from 3D printing to biomaterials";
Vortrag: Seminar Series 2017,
CEITEC Brünn (eingeladen);
21.06.2017.
R. Liska:
"Struktur und Reaktivität von Photoinitiatoren mit neuen Chromophoren";
Vortrag: Institut für Nanostrukturierte Materialien und Photonik, Joanneum Research,
Weiz, Österreich (eingeladen);
29.10.2003.
R. Liska:
"Thiol-ene photopolymerization";
Vortrag: 1rst consortium meeting of our ITN project PHOTO-EMULSION,
Mulhouse, France (eingeladen);
15.10.2018
- 19.10.2018.
R. Liska:
"Two Photon induced Polymerization: An excellent tool for precise sub- micrometer fabrication of biocompatible photopolymers";
Vortrag: Summer school P2M,
Ghent (eingeladen);
25.08.2013
- 28.08.2013.
R. Liska:
"Wasserlösliche Polymere für den Einsatz in Rapid Prototyping";
Vortrag: Technische Universität Wien - Institut für Werkstoffkunde und Materialprüfung,
Wien (eingeladen);
27.08.2003.
R. Liska, B. Ganster:
"Neue Konzepte für bathochrom verschobene Photoinitiatoren";
Vortrag: Seminar Fa. Ivoclar,
Wien;
03.11.2005.
R. Liska, C. Haderer:
"Immobilisierte Fluoreszenzsensoren für die extrakorporale Blutreinigung";
Vortrag: Seminar Fa. Ivoclar,
Wien;
03.11.2005.
R. Liska, M. Höfer:
"Reaktionen mit singulett Sauerstoff";
Vortrag: Seminar Fa. Ivoclar,
Wien;
03.11.2005.
R. Liska, S. Kopeinig:
"Neue Photoreaktive Gruppen";
Vortrag: Seminar Fa. NBG Coatings,
Wien;
20.09.2005.
R. Liska, C. Pich:
"Additionsreaktionen an funktionellen Polysiloxanen";
Vortrag: Seminar Fa. NBG Coatings,
Wien;
20.09.2005.
R. Liska, N.U Pucher:
"Materials for Two Photon Absorption Photopolymerization";
Vortrag: Projektmeeting Fa. ISOTEC,
Reinischkogel;
06.07.2006
- 08.07.2006.
R. Liska, M. Schuster, R. Inführ, C. Turecek, N.U Pucher, C. Heller, B. Seidl, C. Fritscher, L. Kuna, A. Haase, V. Schmidt, H. Lichtenegger, F. Varga, J. Stampfl:
"Single- and Two-Photon Initiated Polymerization in Rapid Prototyping";
Vortrag: 2007 MRS Spring Meeting,
San Francisco, USA (eingeladen);
09.04.2007
- 13.04.2007.
O. Liske, P. Dorfinger, B. Steyrer, C. Gorsche, R. Gmeiner, J. Stampfl, R. Liska, S. Baudis, S. Knaus:
"Tailor-made 3D Manufactured Products from Bio-based Renewable Raw Materials";
Poster: Blickpunkt Forschung: Materialinnovationen @ TU Wien,
Wien;
19.09.2018.
M. Lunzer, D. Ossipov, P. Gruber, K. Hölzl, M. Markovic, R. Liska, A. Ovsianikov:
"Biocompatible Micropatterning of o-Nitrobenzyl Crosslinked Hydrogels by Sensitised Two-Photon Cleavage";
Poster: Workshop Additive manufacturing as a tool to create life in 3D,
Brno;
26.07.2017
- 27.07.2017.
M. Lunzer, D. Ossipov, P. Gruber, K. Hölzl, M. Markovic, R. Liska, A. Ovsianikov:
"Biocompatible Micropatterning of o-Nitrobenzyl Crosslinked Hydrogels by Sensitized Two- Photon Cleavage";
Poster: 1st Vienna Polymer-Group Symposium,
Wien;
27.02.2018.
M. Lunzer, D. Ossipov, K. Hölzl, M. Markovic, R. Liska, A. Ovsianikov:
"Photo-grafting of VEGF protein gradients into elastin-like polymer hydrogels for improved vascularization";
Poster: ViCEM - Vienna Center for Engineering in Medicine Inaugural Meeting 2017,
Wien;
09.11.2017
- 10.11.2017.
D. Mandt, P. Gruber, M. Markovic, M. Tromayer, M. Rothbauer, S. Kratz, J. Van Hoorick, P. Dubruel, S. van Vlierberghe, P. Ertl, R. Liska, A. Ovsianikov:
"Laser Based 3D Printing of Hydrogel Barrier Models for Microfluidic Applications";
Poster: ViCEM - Vienna Center for Engineering in Medicine Inaugural Meeting 2017,
Wien;
09.11.2017
- 10.11.2017.
D. Mandt, P. Gruber, M. Markovic, M. Tromayer, M. Rothbauer, S. Kratz, J. Van Hoorick, P. Dubruel, S. Van Vlierberghe, P. Ertl, R. Liska, A. Ovsianikov:
"Laser-Based 3d Printing Of Hydrogel Barrier Models For Microfluidic Applications";
Poster: Biofabrication for Hierarchical in vitro Tissue Models,
Herstein;
05.06.2017
- 09.06.2017.
D. Mandt, P. Gruber, M. Markovic, M. Tromayer, M. Rothbauer, S. Kratz, J. Van Hoorick, P. Dubruel, S. van Vlierberghe, P. Ertl, R. Liska, A. Ovsianikov:
"Laser-based 3D Printing of Hydrogel Barrier Models for Microfluidic Applications";
Poster: 1st Vienna Polymer-Group Symposium,
Wien;
27.02.2018.
A. Mautner, X.H. Qin, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"Vinyl carbonates, a new generation of low toxic monomers";
Poster: 1st P2M Networking Conference,
Obernai, F;
11.11.2011
- 14.11.2011.
G. Mikl, R. Obmann, S. Schörpf, R. Liska, T. Konegger:
"Pore Morphology Tailoring in Polymer-derived Ceramics generated through Photopolymerization-assisted Solidification Templating";
Vortrag: 7. Jahrestagung der Österreichischen Keramischen Gesellschaft (AuCerS) mit Vortragswettbewerb,
Leoben;
05.05.2019.
P. Müller, S. Pantschov, R. Liska, S. Knaus:
"Synthesis and Grafting of Novel Hindered Amine Light Stabilizers onto Polypropylene";
Poster: 5. Österreichische Polymertage,
Leoben;
12.09.2001
- 14.09.2001.
A. Ovsianikov, J. Torgersen, X.H. Qin, Z. Li, S Mühleder, W Holnthoner, H. Redl, R. Liska, J. Stampfl:
"Laser fabrication of cell-containing hydrogel constructs";
Vortrag: International Conference on Biofabrication,
Manchester;
29.10.2012
- 31.10.2012.
G. Peer, A. Eibel, C. Gorsche, Y. Catel, G. Gescheidt, N. Moszner, R. Liska:
"Regulation of Methacrylate Networks via Ester-Activated Vinyl Ethers as ChainTransfer Agents";
Poster: RadTech USA 2019,
Monterey - CA, USA;
15.09.2019
- 18.09.2019.
G. Peer, M. Mitterbauer, P. Knaack, S. Naumov, M. Markovic, A. Ovsianikov, N. Moszner, R. Liska:
"Tetraacylstannnane as Highly Reactive Type I Photoinitiators for Long Wavelength Curing Applications";
Poster: RadTech USA 2019,
Monterey - CA, USA;
15.09.2019
- 18.09.2019.
M. Porodec, C. Heller, R. Liska, J. Stampfl, M. Hacker, M. Schulz-Siegmund:
"Covalent Modification of Photo-cross-linkable Polymers for Bone Tissue Engineering Using a Model Protein";
Poster: International Workshop on Biomacromolecules 2008 - Renewable, Degradable and Biomedical Polymers,
Stockholm/ Schweden;
01.06.2008
- 04.06.2008.
N.U Pucher, C. Heller, B. Seidl, R. Inführ, L. Kuna, A. Haase, V. Schmidt, H. Lichtenegger, J. Stampfl, R. Liska:
"New alkyne-based initiators for single- ad two-photon-induced photopolymerization";
Poster: 2007 MRS Spring Meeting,
San Francisco;
09.04.2007
- 13.04.2007.
X.H. Qin, C. Heller, M. Schwentenwein, F. Varga, G. Russmüller, J. Stampfl, R. Liska:
"New Bio-photopolymers with good biocompatibility for Tissue Engineering";
Poster: Materials Science and Engineering,
Darmstadt, Germany;
24.08.2010
- 26.08.2010.
X.H. Qin, B. Husar, J. Torgersen, S. Mühleder, H. Redl, W. Holnthoner, J. Stampfl, A. Ovsianikov, R. Liska:
"Two-photon polymerization for biodegradable 3D hydrogels scaffolds";
Poster: RadTech Asia 2013,
Shanghai;
20.05.2013
- 24.05.2013.
S. Schörpf, Y. Catel, N. Moszner, C. Gorsche, R. Liska:
"Reduction of Polymerization-Induced Shrinkage Stress via Combination of Radical Ring Opening and Addition Fragmentation Chain Transfer";
Poster: RadTech USA 2019,
Monterey - CA, USA;
15.09.2019
- 18.09.2019.
S. Schörpf, R. Taschner, P. Gauss, P. Knaack, R. Liska:
"Replacing Aromatic Type II Photoinitiators with α-Ketoesters for Radical Polymerization";
Poster: RadTech USA 2019,
Monterey - CA, USA;
15.09.2019
- 18.09.2019.
C. Schreiber, S. Baudis, C. Grasl, M. Stoiber, I. Walter, R. Plasenzotti, D. Bernhard, R. Liska:
"In-vivo evaluation of new synthetic degradable and non-degradable small diameter vascular grafts";
Vortrag: Vfwf-Universitätsvorlesung,
Vienna (eingeladen);
02.12.2011.
M. Schuster, S.X. Chen, R. Liska, M. Rumpler, C. Turecek, F. Varga, J. Stampfl:
"Development of Biodegradable Photopolymers for Bone Tissue Engineering";
Poster: RadTech Europe 2005,
Barcelona, Spain;
18.10.2005
- 20.10.2005.
M. Schuster, S.X. Chen, R. Liska, C. Turecek, F. Varga, J. Stampfl:
"Photopolymerizable Biopolymers for Rapid Prototyping of Cellular Bone Repleacement Meterials";
Poster: RadTech Europe 2005,
Barcelona, Spain;
18.10.2005
- 20.10.2005.
M. Schuster, C. Turecek, B. Kaiser, F. Varga, J. Stampfl, R. Liska:
"Biophotopolymers for Rapid Prototyping of Cellular Bone Replacement Materials";
Vortrag: Junior Scientist Conference,
Wien;
19.04.2006
- 21.04.2006.
M. Schuster, C. Turecek, F. Varga, H. Lichtenegger, J. Stampfl, R. Liska:
"Development of bone replacement materials using stereolithography";
Poster: MRS Spring Meeting,
an Francisco;
09.04.2007
- 13.04.2007.
M. Schuster, C. Turecek, F. Varga, J. Stampfl, R. Liska:
"3D-shaping of biodegradable photopolymers for hard tissue replacement";
Vortrag: EMRS Spring Meeting 2007,
Strasbourg, France;
28.05.2007
- 01.06.2007.
M. Schwentenwein, C. Heller, X.H. Qin, F. Varga, J. Stampfl, R. Liska:
"Additive Manufacturing Technologies for 3D Fabrication of Biocompatible and Biodegradable Photopolymers";
Vortrag: Materials Science and Engineering,
Darmstadt, Germany;
24.08.2010
- 26.08.2010.
P. Sehnal, K. Harper, A. Rose, D. Anderson, A. Green, B. Husar, M. Griesser, R. Liska:
"Novel Phosphine Oxide Photoinitiators";
Vortrag: RadTech USA 2014,
Chicago (Rosemont);
12.05.2014
- 14.05.2014.
B. Seidl, K. Kalinyaprak-Icten, R. Liska:
"New Insights into 1,5-Diphenyl 1,4-Diynone as Ohotoinitiator";
Vortrag: RadTech Europe 2005,
Barcelona, Spain (eingeladen);
18.10.2005
- 20.10.2005.
B. Seidl, K. Kalinyaprak-Icten, G. Ullrich, R. Liska:
"New Cross-Conjugated Photoinitiators";
Poster: RadTech Europe 2005,
Barcelona, Spain;
18.10.2005
- 20.10.2005.
B. Seidl, R. Liska:
"2-tert-Butylacrylonitrile, a Non-Polymerizable Monomer for the Investigation of Initiation Mechanism";
Poster: RadTech Europe 2005,
Barcelona, Spain;
18.10.2005
- 20.10.2005.
K. Seidler, S. Baudis, S. Ligon, C. Grasl, M. Arras, H. Schima, H. Bergmeister, B. Winter, T. Koch, J. Stampfl, R. Liska:
"Biocompatible and biodegradable thermoplastic urethane Elastomers for electrospinning of vascular grafts";
Poster: 1st P2M Networking Conference,
Obernai, F;
11.11.2011
- 14.11.2011.
L. Spoljaric-Lukacic, R. Saf, R. Liska, S. Knaus:
"Free Radical Grafting of Maleimides onto Polifines: Studie on Model Compounds";
Poster: World Polymer Congress MACRO 2004,
Paris, France;
04.07.2004
- 09.07.2004.
J. Stampfl, R. Liska, M. Spitzbart, S. Fischer, H. Noll:
"3D-Mikrostrukurerung funktionaler Materialien";
Vortrag: Mikrotechniktage Dornbirn 2005,
Dornbirn;
22.03.2005
- 23.03.2005.
J. Stampfl, J. Torgersen, A. Ovsianikov, X.H. Qin, L. Zhiquan, V. Mironov, R. Liska:
"Photo-sensitive Biocompatible Hydrogels Structuring Extracellular Environments by Two Photon Polymerisation";
Poster: 2012 MRS Spring Meeting & Exhibit,
San Francisco;
09.04.2012
- 13.04.2012.
W. Steiger, P. Gruber, A. Dobos, M. Tromayer, M. Lunzer, R. Liska, A. Ovsianikov:
"Fully Automated Z-scan Setup Based on a Tunable FS-Oscillator";
Poster: AMBA 2017,
Ghent;
28.09.2017.
W. Steiger, P. Gruber, A. Dobos, M. Tromayer, M. Lunzer, R. Liska, A. Ovsianikov:
"Fully Automated Z-Scan Setup based on an tunable FS-Oscillator";
Poster: 1st Vienna Polymer-Group Symposium,
Wien;
27.02.2018.
W. Steiger, P. Gruber, A. Dobos, M. Tromayer, M. Lunzer, R. Liska, A. Ovsianikov:
"Spectral optimization of multiphoton polymerisation for tissue engineering";
Vortrag: ViCEM - Vienna Center for Engineering in Medicine Inaugural Meeting 2017,
Wien;
09.11.2017
- 10.11.2017.
P. Steinbauer, C. Dworak, S. Baudis, P.J. Thurner, O.G. Andriotis, R. Liska:
"Phosphorus-based RAFT Polymers for Bio-Adhesion";
Poster: 1st Vienna Polymer-Group Symposium,
Wien;
27.02.2018.
P. Steinbauer, S. Orman, C. Hofstetter, M. Schwentenwein, G. Russmüller, J. Stampfl, R. Liska, S. Baudis:
"Tough photopolymers as customized biocompatible scaffolds for bone tissue regeneration";
Vortrag: New Frontiers in Biofabrication: From Biomolecules to Tissues and Organs,
Leuven, Belgium;
17.09.2019
- 18.09.2019.
P. Steinbauer, S. Orman, C. Hofstetter, M. Schwentenwein, G. Russmüller, J. Stampfl, R. Liska, S. Baudis:
"Tough photopolymers for bone tissue regeneration";
Vortrag: ViCEM - Vienna Center for Engineering in Medicine - Biennial Meeting 2019,
Wien;
14.11.2019
- 15.11.2019.
P. Steinbauer, R. Reichsöllner, B. Dellago, K. Ehrmann, J. Stampfl, R. Liska, S. Baudis:
"Christian Doppler Laboratory for Advanced Polymers for Biomaterials and 3D Printing";
Poster: 2nd Vienna Polymer-Group Symposium,
Universitäts- und Forschungszentrum Tulln;
12.06.2019.
P. Steinbauer, A. Rohatschek, P.J. Thurner, A. Orestis, R. Liska, S. Baudis:
"Adhesion measurement of binding motifs for bone glue applications";
Poster: 2nd INTERREG - 7th TERMIS Winterschool 2019 "Musculoskeletal Tissue Regeneration: From Mechanobiology to in Vitro/in Vivo Models and Advanced Imaging",
Radstadt;
13.01.2019
- 16.01.2019.
B. Steyrer, C. Gorsche, P. Dorfinger, R. Liska, J. Stampfl:
"Toughening of Photopolymers for Lithography-based Additive Manufacturing";
Vortrag: MSE 2016,
Darmstadt;
26.09.2016
- 29.09.2016.
B. Steyrer, R. Liska, J. Stampfl:
"Printing Photopolymers by Hot Lithography";
Vortrag: Materials Science and Engineering - MSE 2018,
Darmstadt;
26.09.2018
- 28.09.2018.
J. Torgersen, A. Ovsianikov, V. Mironov, N.U Pucher, X.H. Qin, Z. Li, K. Cicha, T. Machacek, V. Jantsch-Plunger, R. Liska, J. Stampfl:
"High Speed 3D laser micro-fabrication of biocompatible hydrogel scaffolds";
Hauptvortrag: CAIM III Tercier Congreso Argentino die Engereía Mécanica,
Buenos Aires (eingeladen);
02.10.2012
- 05.10.2012.
C. Turecek, M. Schuster, F. Varga, R. Liska, B. Kaiser, J. Stampfl, K. Klaushofer:
"Evaluation and influence of photopolymers, capable for rapid prototyping, on the adhesion, proliferation and differentiation of osteoblasts";
Poster: 33rd European Symposium on Calcified Tissues,
Prag;
10.05.2006
- 14.05.2006.
G. Ullrich, S. Jauk, R. Liska, P. Burtscher, N. Moszner:
"How to Avoid the Back Electron Transfer in Type II Photoinitiators";
Poster: RadTech Europe 2005,
Barcelona, Spain;
18.10.2005
- 20.10.2005.
G. Ullrich, R. Liska, P. Burtscher, U. Salz, N. Moszner:
"Investigation of Phenylglycine Derivatives as Coinitiators";
Poster: RadTech Europe 2005,
Barcelona, Spain;
18.10.2005
- 20.10.2005.
T. Verdianz, R. Liska:
"Grundlegende Untersuchungen zur Oberflächenmodifizierung von Polyimiden";
Vortrag: VA TECH,
Weiz (eingeladen);
28.01.2003.
E. Zerobin, S. Baudis, Z. Tomasikova, X.H. Qin, M. Markovic, P. Gruber, J. Stampfl, A. Ovsianikov, R. Liska:
"High Resolved Biocompatible Hydrogel Constructs Based on Hyaluronic Acid";
Poster: Workshop Additive manufacturing as a tool to create life in 3D,
Brno;
26.07.2017
- 27.07.2017.
E. Zerobin, S. Baudis, Z. Tomasikova, X.H. Qin, M. Markovic, P. Gruber, J. Stampfl, A. Ovsianikov, R. Liska:
"Two-Photon Structured Hydrogels based on Hyaluronic Acid for Applications in Tissue Engineering";
Vortrag: Österreichische Gesellschaft für Biomedizinische Technik-Jahrestagung 2017,
Wien (eingeladen);
09.11.2017
- 10.11.2017.
E. Zerobin, M. Tromayer, M. Markovic, P. Gruber, J. Stampfl, A. Ovsianikov, S. Baudis, R. Liska:
"Hyaluronic acid as a basis for the development of hydrogel networks and Two-Photon Initiators";
Vortrag: ViCEM - Vienna Center for Engineering in Medicine Inaugural Meeting 2017,
Wien;
09.11.2017
- 10.11.2017.
E. Zerobin, M. Tromayer, M. Markovic, W. Steiger, P. Gruber, J. Stampfl, A. Ovsianikov, S. Baudis, R. Liska:
"Hyaluronic acid as a basis for the development of hydrogel networks and Two-Photon Initiators";
Poster: 1st Vienna Polymer-Group Symposium,
Wien;
27.02.2018.
Patente
K. Ehrmann, S. Baudis, R. Liska:
"Thermoplastic polyurethane urea polyadducts";
Patent: Österreich,
Nr. EP 3932967 A1;
eingereicht: 03.07.2020.
K. Ehrmann, S. Baudis, R. Liska:
"Thermoplastic polyurethane urea polyadducts";
Patent: Österreich,
Nr. WO 2022/003204 A1;
eingereicht: 05.07.2021.
H. Gruber, S. Knaus, S. Jauk, A. Liska, R. Liska, J. Wendrinsky:
"Grafting of polymers for coating with metals";
Patent: Europa,
Nr. EP 1471084 A2;
eingereicht: 31.03.2004,
erteilt: 27.10.2004.
H. Gruber, S. Knaus, A. Liska, R. Liska, P. Sulek, J. Wendrinsky, P. Sattler:
"Polymers for moldings with good surface metalizabilty";
Patent: Europa,
Nr. EP 1443063 A1;
eingereicht: 30.01.2004,
erteilt: 04.08.2004.
S. Jauk, A. Liska, S. Knaus, R. Liska, H. Gruber, J. Wendrinsky:
"Oberflächenmodifizierung von Polymeren mit funktionellen Aziden";
Patent: Österreich,
Nr. AT 20030157;
eingereicht: 01.04.2004,
erteilt: 2005.
I. Lamparth, N. Moszner, R. Liska, C. Gorsche, Y. Catel, G. Peer:
"Dentalmaterialien Auf Basis Von Cyclopolymerisierbaren Vernetzern";
Patent: Österrech,
Nr. EP 3861976 A1;
eingereicht: 05.02.2020.
I. Lamparth, N. Moszner, R. Liska, C. Gorsche, Y. Catel, G. Peer:
"Dentalmaterialien Auf Basis Von Cyclopolymerisierbaren Vernetzern - Dental materials based on cyclopolymerizable crosslinkers";
Patent: USA,
Nr. US 20210236388;
eingereicht: 05.08.2021.
R. Liska, S. Baudis, M. Schuster, C. Heller, F. Varga, J. Stampfl, H. Bergmeister, G. Weigel:
"Zusammensetzungen zur Herstellung biologisch abbaubarer, bioverträglicher, vernetzter Polymere auf Basis von Polyvinylalkohol";
Patent: Österreich,
Nr. AT19032007;
eingereicht: 30.11.2007.
R. Liska, S. Baudis, M. Schuster, C. Heller, F. Varga, J. Stampfl, H. Bergmeister, G. Weigel:
"Zusammensetzungen zur Herstellung biologisch abbaubarer, bioverträglicher, vernetzter Polymere auf Basis von Polyvinylalkohol";
Patent: Österreich,
Nr. At506168 (b1);
eingereicht: 30.11.2007,
erteilt: 15.02.2012.
R. Liska, S. Baudis, M. Schuster, C. Heller, F. Varga, J. Stampfl, H. Bergmeister, G. Weigel:
"Zusammensetzungen zur Herstellung biologisch abbaubarer, bioverträglicher, vernetzter Polymere auf Basis von Polyvinylalkohol";
Patent: Europa,
Nr. Ep2428235 (b1);
eingereicht: 30.11.2007,
erteilt: 04.06.2014.
R. Liska, S. Baudis, M. Schuster, C. Heller, F. Varga, J. Stampfl, H. Bergmeister, G. Weigel:
"Zusammensetzungen zur Herstellung biologisch abbaubarer, bioverträglicher, vernetzter Polymere auf Basis von Polyvinylalkohol";
Patent: USA,
Nr. Us8999323 (b2);
eingereicht: 30.11.2007,
erteilt: 07.04.2015.
R. Liska, D. Bomze, W. Kern:
"Method for frontal polymerization of cationically polymerizable monomers";
Patent: Österreich,
Nr. At 517640 (a2);
eingereicht: 02.09.2015.
R. Liska, D. Bomze, W. Kern, P. Knaack:
"Method for frontal polymerization of cationically polymerizable monomers";
Patent: International,
Nr. Ep3344679 (b1);
eingereicht: 02.09.2015,
erteilt: 09.10.2019.
R. Liska, D. Bomze, W. Kern, P. Knaack:
"Method for frontal polymerization of cationically polymerizable monomers";
Patent: USA,
Nr. US010738146 (b1);
eingereicht: 10.10.2019,
erteilt: 11.08.2020.
R. Liska, P. Esfandiari:
"Stable Curable Thiol-Ene Formulation";
Patent: EU,
Nr. Appl. No. 11159451.1;
eingereicht: 23.03.2011.
R. Liska, C. Gorsche, G. Harakaly, M. Kury, J. Stampfl, P. Dorfinger, Y. Chen, C. Li, S. Kaza:
"Curable composition for use in a high temperature lithography-based photopolymerization process and method of producing crosslinked polymers therefrom for use in orthodontic appliances";
Patent: EU,
Nr. EP3564282A1;
eingereicht: 06.05.2019.
R. Liska, C. Gorsche, G. Harakaly, M. Kury, J. Stampfl, P. Dorfinger, Y. Chen, C. Li, S. Kaza:
"Curable composition for use in a high temperature lithography-based photopolymerization process and method of producing crosslinked polymers therefrom for use in orthodontic appliances";
Patent: USA,
Nr. WO2019213585A1;US2019338067A1;
eingereicht: 03.05.2019.
R. Liska, C. Gorsche, M. Kury, Y. Chen, C. Li, S. Kaza:
"Novel polymerizable monomers and their use as reactive diluents in curable compositions";
Patent: EU,
Nr. EP3564206A1;
eingereicht: 03.05.2019.
R. Liska, C. Gorsche, M. Kury, Y. Chen, C. Li, S. Kaza:
"Novel polymerizable monomers and their use as reactive diluents in curable compositions";
Patent: USA,
Nr. WO2019213588A1;US2019345276A1;
eingereicht: 03.05.2019.
R. Liska, C. Gorsche, K. Seidler, N. Moszner:
"Sulfonsäureester als Regler in radikalischen Polymerisationsreaktionen";
Patent: International,
Nr. Wo2016177677 (a1);
eingereicht: 02.05.2016.
R. Liska, C. Gorsche, K. Seidler, N. Moszner:
"Sulfonsäureester als Regler in radikalischen Polymerisationsreaktionen";
Patent: EU,
Nr. Ep3292157 (b1);
eingereicht: 07.05.2015,
erteilt: 24.04.2019.
R. Liska, R. Inführ, H. Gruber, J. Stampfl, H. Lichtenegger:
"Mit Strahlung härtbare, in organischen Lösungsmitteln lösliche Zusammensetzungen und deren Verwendung für Rapid Prototyping Verfahren";
Patent: WO,
Nr. Wo2007002965 (b1);
eingereicht: 30.06.2005,
erteilt: 19.04.2007.
R. Liska, R. Inführ, H. Gruber, J. Stampfl, H. Lichtenegger:
"Mit Strahlung härtbare, in organischen Lösungsmitteln lösliche Zusammensetzungen und deren Verwendung für Rapid Prototyping Verfahren";
Patent: Österreich,
Nr. A1106 / 05;
eingereicht: 30.06.2005,
erteilt: 15.09.2008.
R. Liska, R. Inführ, H. Gruber, J. Stampfl, H. Lichtenegger:
"Mit Strahlung härtbare, in organischen Lösungsmitteln lösliche Zusammensetzungen und deren Verwendung für Rapid Prototyping Verfahren";
Patent: Österreich,
Nr. At502110 (b1);
eingereicht: 30.06.2005,
erteilt: 15.09.2008.
R. Liska, R. Inführ, H. Gruber, J. Stampfl, H. Lichtenegger:
"Mit Strahlung härtbare, in organischen Lösungsmitteln lösliche Zusammensetzungen und deren Verwendung für Rapid Prototyping Verfahren";
Patent: Europa,
Nr. Ep1907192 (b1);
eingereicht: 30.06.2005,
erteilt: 19.11.2008.
R. Liska, R. Inführ, H. Gruber, J. Stampfl, H. Lichtenegger:
"Mit Strahlung härtbare, in organischen Lösungsmitteln lösliche Zusammensetzungen und deren Verwendung für Rapid Prototyping Verfahren";
Patent: USA,
Nr. Us7815835 (b2);
eingereicht: 30.06.2005,
erteilt: 19.10.2010.
R. Liska, R. Inführ, H. Gruber, J. Stampfl, H. Lichtenegger:
"Mit Strahlung härtbare, in organischen Lösungsmitteln lösliche Zusammensetzungen und deren Verwendung für Rapid Prototyping Verfahren";
Patent: Japan,
Nr. Jp4861413 (b2);
eingereicht: 30.06.2005,
erteilt: 25.01.2012.
R. Liska, S. Jauk, H. Gruber:
"Photopolymerisierbare Mischungen mit Photoinitiatorenauf Basis von Benzophenon und Phenylglycin";
Patent: Österreich,
Nr. AT 501750;
eingereicht: 10.04.2005,
erteilt: 19.10.2006.
R. Liska, S. Jauk, H. Gruber:
"Photopolymerizable mixtures comprising photoinitiators based on benzophenone and phenylglycine";
Patent: Internationales Patent,
Nr. WO 2006/108204 A1;
eingereicht: 10.04.2006.
R. Liska, P. Knaack, D. Bomze, I. Krossing:
"Photoinitiator for cationic polymerization";
Patent: Österreich,
Nr. At517626 (b1);
eingereicht: 02.09.2015,
erteilt: 15.06.2017.
R. Liska, P. Knaack, D. Bomze, I. Krossing:
"Photoinitiator for cationic polymerization";
Patent: EU,
Nr. Ep3300504 (b1);
eingereicht: 02.09.2015,
erteilt: 19.06.2019.
R. Liska, P. Knaack, D. Bomze, I. Krossing:
"Photoinitiator for cationic polymerization";
Patent: USA,
Nr. Us10266643 (b2);
eingereicht: 02.09.2015,
erteilt: 23.04.2019.
R. Liska, P. Knaack, P. Gauss, R. Taschner:
"Photoinitiatoren für lichthärtende Zusammensetzungen";
Patent: Österreich,
Nr. At520240 (a1);
eingereicht: 27.07.2017.
R. Liska, P. Knaack, P. Gauss, R. Taschner:
"Photoinitiatoren für lichthärtende Zusammensetzungen";
Patent: WO,
Nr. Wo2019020805 (a1);
eingereicht: 31.01.2019.
R. Liska, S. Kopeinig, S. Knaus, H. Gruber, E. Hummer-Koppendorfer:
"Acrylamide mit Initiatoreigenschaften";
Patent: Österreich, EU,
Nr. At 504811 B1, Ep1956033 (b1);
eingereicht: 06.02.2007,
erteilt: 15.06.2010.
R. Liska, S. Kopeinig, S. Knaus, H. Gruber, E. Hummer-Koppendorfer:
"Methacrylamid-Derivate von Polysiloxanen";
Patent: EU,
Nr. Ep 1956038 B1;
eingereicht: 06.02.2007,
erteilt: 23.09.2009.
R. Liska, X.H. Qin, A. Mautner:
"Thiol-Ene Polymerization with Vinylesters and Vinylcarbonates";
Patent: WO,
Nr. Wo 2013052328 (A1);
eingereicht: 03.09.2011.
R. Liska, X.H. Qin, A. Mautner:
"Thiol-Ene Polymerization with Vinylesters and Vinylcarbonates";
Patent: EP,
Nr. Ep2764049 (b1);
eingereicht: 03.09.2011,
erteilt: 17.08.2016.
R. Liska, X.H. Qin, A. Mautner:
"Thiol-Ene Polymerization with Vinylesters and Vinylcarbonates";
Patent: Japan,
Nr. Jp6101271 (b2);
eingereicht: 03.09.2011,
erteilt: 22.03.2017.
R. Liska, X.H. Qin, A. Mautner:
"Thiol-Ene Polymerization with Vinylesters and Vinylcarbonates";
Patent: USA,
Nr. Us9623145 (b2);
eingereicht: 03.09.2011,
erteilt: 18.04.2017.
R. Liska, X.H. Qin, A. Mautner:
"Thiol-Ene Polymerization with Vinylesters and Vinylcarbonates";
Patent: EP,
Nr. EP3091050B1;
eingereicht: 20.09.2012,
erteilt: 18.07.2018.
R. Liska, M. Schuster, H. Gruber, J. Stampfl, F. Varga:
"Mit Strahlung härtbare, biologisch abbaubare Zusammensetzung und deren Verwendung als polymere Stützmaterialien für den Knochenersatz";
Patent: Österreich,
Nr. AT 501700;
eingereicht: 10.04.2005,
erteilt: 15.03.2011.
R. Liska, M. Schuster, J. Stampfl, H. Gruber, F. Varga:
"Photocurable polymer moldings for prostheses";
Patent: Internationales Patent,
Nr. Wo 2006108202 A8, US erteilt (US 8,022,155 B2 20.8.2011);
eingereicht: 10.04.2006,
erteilt: 20.08.2011.
R. Liska, M. Schuster, J. Stampfl, H. Gruber, F. Varga:
"Photocurable polymer moldings for prostheses";
Patent: Österreich,
Nr. At501700 (b1);
eingereicht: 10.04.2006,
erteilt: 15.03.2011.
R. Liska, M. Schuster, J. Stampfl, H. Gruber, F. Varga:
"Photocurable polymer moldings for prostheses";
Patent: USA,
Nr. Us8022155 (b2);
eingereicht: 10.04.2006,
erteilt: 20.09.2011.
R. Liska, F. Schwager, H. Gruber, J. Stampfl:
"Mit Strahlung härtbare wasserlösliche Zusammensetzung und deren Verwendung für Rapid Prototyping Verfahren";
Patent: Österreich,
Nr. AT 412 399 (2004);
eingereicht: 18.06.2003,
erteilt: 15.07.2005.
R. Liska, B. Seidl, H. Gruber:
"Photopolymerisable mixtures with photoinitiators based on di-ynone derivates";
Patent: Internationales Patent,
Nr. PCT/AT2005/026840;
eingereicht: 01.09.2004,
erteilt: 24.03.2005.
R. Liska, B. Seidl, H. Gruber:
"Photopolymerisable mixtures with photoinitiators based on di-ynone derivates";
Patent: Österreich,
Nr. At412346 (b);
eingereicht: 01.09.2004,
erteilt: 25.01.2005.
R. Liska, B. Seidl, H. Gruber:
"Photopolymerisierbare Mischungen mit Photoinitiatoren auf Basis von Di-inon-Derivaten";
Patent: Österreich,
Nr. AT 412 346 (2004);
eingereicht: 09.12.2003,
erteilt: 04.11.2004.
R. Liska, J. Stampfl, J. Patzer, W. Wachter, C. Appert:
"Vorrichtung und Verfahren zur Verarbeitung von lichtpolymerisierbarem Material zum schichtweisen Aufbau eines Körpers";
Patent: Europa,
Nr. Ep2337668 (b1);
eingereicht: 20.10.2008,
erteilt: 20.03.2013.
R. Liska, J. Stampfl, J. Patzer, W. Wachter, C. Appert:
"Vorrichtung und Verfahren zur Verarbeitung von lichtpolymerisierbarem Material zum schichtweisen Aufbau eines Körpers";
Patent: USA,
Nr. Us 8741203 (b2);
eingereicht: 20.10.2008,
erteilt: 03.06.2014.
R. Liska, J. Stampfl, F. Varga, H. Gruber, S. Baudis, C. Heller, M. Schuster, H. Bergmeister, G. Weigel, C. Dworak:
"Composition that can be cured by polymerization for the production of biodegradable, biocompatible, cross-linkable polymers on the basis of polyvinyl alcohol";
Patent: WO,
Nr. Wo 2009065162 A2;
eingereicht: 23.11.2007,
erteilt: 28.05.2009.
R. Liska, J. Stampfl, F. Varga, H. Gruber, S. Baudis, C. Heller, M. Schuster, H. Bergmeister, G. Weigel, C. Dworak:
"Composition that can be cured by polymerization for the production of biodegradable, biocompatible, cross-linkable polymers on the basis of polyvinyl alcohol";
Patent: Eu, Usa, Jp, Ca,
Nr. EP2219697;
eingereicht: 21.11.2008,
erteilt: 28.05.2009.
R. Liska, J. Stampfl, F. Varga, H. Gruber, S. Baudis, C. Heller, M. Schuster, H. Bergmeister, G. Weigel, C. Dworak:
"Composition that can be cured by polymerization for the production of biodegradable, biocompatible, cross-linkable polymers on the basis of polyvinyl alcohol";
Patent: Europa,
Nr. Ep2428235 (b1);
eingereicht: 23.11.2007,
erteilt: 04.06.2014.
R. Liska, J. Stampfl, F. Varga, H. Gruber, S. Baudis, C. Heller, M. Schuster, H. Bergmeister, G. Weigel, C. Dworak:
"Composition that can be cured by polymerization for the production of biodegradable, biocompatible, cross-linkable polymers on the basis of polyvinyl alcohol";
Patent: USA,
Nr. Us8999323 (b2);
eingereicht: 23.11.2007,
erteilt: 07.04.2015.
R. Liska, T. Verdianz, H. Gruber, H. Simbürger:
"Bonding the surface of polyimides to other resins";
Patent: Österreich,
Nr. At 500472 A1;
eingereicht: 03.09.2003.
R. Liska, T. Verdianz, H. Gruber, H. Simbürger:
"Polymers containing imide groups and bearing immobilized catalysts";
Patent: Österreich,
Nr. At 500471 A1;
eingereicht: 03.09.2003.
N. Moszner, J. Angermann, U. Fischer, I. Lamparth, Y. Catel, R. Liska:
"Polymeric materials with silane-based transmission reagents";
Patent: EU,
Nr. Ep3424983 (b1);
eingereicht: 09.01.2019,
erteilt: 23.10.2019.
N. Moszner, U. Fischer, P. Burtscher, R. Liska, P. Knaack, M. Mitterbauer:
"Polymerizable compositions comprising acyl tin photoinitiators";
Patent: WO,
Nr. WO2018046438A1;
eingereicht: 04.09.2017.
N. Moszner, U. Fischer, P. Burtscher, R. Liska, P. Knaack, M. Mitterbauer:
"Polymerizable compositions having acyl tin photoinitiators";
Patent: Europa,
Nr. Ep3293215 (a1);
eingereicht: 07.09.2016.
N. Moszner, U. Fischer, I. Lamparth, P. Burtscher, R. Liska, C. Gorsche, K. Seidler, P. Gauss:
"Komposite mit gesteuerter Netzwerkstruktur";
Patent: WO,
Nr. Wo2016005534 A1;
eingereicht: 11.07.2014.
N. Moszner, U. Fischer, I. Lamparth, P. Burtscher, R. Liska, C. Gorsche, K. Seidler, P. Gauss:
"Komposite mit gesteuerter Netzwerkstruktur";
Patent: EP,
Nr. EP3166569B1;
eingereicht: 11.07.2014,
erteilt: 28.11.2018.
N. Moszner, I. Lamparth, T. Bock, U. Fischer, U. Salz, V. Rheinberger, R. Liska:
"Dental materials based on monomers having debonding-on-demand properties";
Patent: WO,
Nr. Wo 2013034777 (a2); Wo 2013034777 (a3);
eingereicht: 10.09.2012.
N. Moszner, I. Lamparth, T. Bock, U. Fischer, U. Salz, V. Rheinberger, R. Liska:
"Dental materials based on monomers having debonding-on-demand properties";
Patent: US,
Nr. Us9320686 (b2);
eingereicht: 08.09.2011,
erteilt: 26.04.2016.
N. Moszner, I. Lamparth, T. Bock, U. Fischer, U. Salz, V. Rheinberger, R. Liska:
"Dental materials based on monomers having debonding-on-demand properties";
Patent: Japan,
Nr. Jp6095665 (b2);
eingereicht: 10.09.2012,
erteilt: 15.03.2017.
N. Moszner, I. Lamparth, T. Bock, U. Fischer, U. Salz, V. Rheinberger, R. Liska:
"Dental materials based on monomers having debonding-on-demand properties";
Patent: USA,
Nr. Us9668946 (b2);
eingereicht: 09.08.2011,
erteilt: 06.06.2017.
N. Moszner, I. Lamparth, T. Bock, U. Fischer, U. Salz, V. Rheinberger, R. Liska:
"Dental materials based on monomers having debonding-on-demand properties";
Patent: EP,
Nr. EP3166568B1;
eingereicht: 17.05.2017,
erteilt: 21.11.2018.
N. Moszner, I. Lamparth, Y. Catel, R. Liska, C. Gorsche, G. Peer:
"Polymer Materials With Unsaturated Transfer Reagents";
Patent: USA,
Nr. US201916545138A;
eingereicht: 20.08.2019.
N. Moszner, I. Lamparth, Y. Catel, R. Liska, C. Gorsche, G. Peer:
"Polymerwerkstoffe mit ungesättigten Übertragungsreagenzien";
Patent: Europa,
Nr. EP18194789;
eingereicht: 17.09.2018.
N. Moszner, I. Lamparth, U. Fischer, K. Rist, P. Burtscher, R. Liska, C. Gorsche, K. Seidler:
"Dental materials which can be hardened by chain transfer polymerization";
Patent: Europa,
Nr. EP3090722B1;
eingereicht: 07.05.2015,
erteilt: 09.01.2019.
N. Moszner, I. Lamparth, U. Fischer, K. Rist, P. Burtscher, R. Liska, C. Gorsche, K. Seidler:
"Durch Kettenübertragungspolymerisation härtbare Dentalmaterialien";
Patent: Europa,
Nr. Ep3090722 A1;
eingereicht: 07.05.2015.
N. Moszner, I. Lamparth, U. Fischer, K. Rist, P. Burtscher, R. Liska, C. Gorsche, K. Seidler:
"Durch Kettenübertragungspolymerisation härtbare Dentalmaterialien";
Patent: International,
Nr. Wo 2016177680 (a1);
eingereicht: 02.05.2016.
N. Moszner, V. Rheinberger, U. Salz, H. Gruber, R. Liska, B. Ganster, G. Ullrich:
"Photopolymerizable dental materials with bisacylphosphine oxides as initiators";
Patent: Eu, Usa, Jp,
Nr. Ep 1749513 B1;
eingereicht: 06.01.2005,
erteilt: 03.04.2009.
N. Moszner, V. Rheinberger, U. Salz, H. Gruber, R. Liska, B. Ganster, G. Ullrich:
"Photopolymerizable dental materials with bisacylphosphine oxides as initiators";
Patent: Europa,
Nr. Ep1749513 (b1);
eingereicht: 06.01.2005,
erteilt: 04.03.2009.
N. Moszner, V. Rheinberger, U. Salz, H. Gruber, R. Liska, B. Ganster, G. Ullrich:
"Photopolymerizable dental materials with bisacylphosphine oxides as initiators";
Patent: USA,
Nr. Us7714034 (b2);
eingereicht: 06.01.2005,
erteilt: 11.05.2010.
N. Moszner, K. Rist, I. Lamparth, P. Burtscher, C. Gorsche, R. Liska:
"Dentalmaterialien mit Debonding-on-Demand-Eigenschaften";
Patent: EP,
Nr. EP3166568(B1);
eingereicht: 11.07.2014,
erteilt: 21.11.2018.
N. Moszner, K. Rist, I. Lamparth, P. Burtscher, C. Gorsche, R. Liska:
"Dentalmaterialien mit Debonding-on-Demand-Eigenschaften";
Patent: WO/USA,
Nr. Wo2016005540 A1/US10213367 (B2);
eingereicht: 11.07.2014,
erteilt: 26.02.2019.
N. Moszner, U. Salz, P. Burtscher, R. Liska, A. Gugg, C. Gorsche:
"Polymerizable compositions with improved through-curing depth";
Patent: Ep, Us, Jp,
Nr. Ep2455059 (b1) Jp5661596 (b2);
eingereicht: 19.11.2010,
erteilt: 23.05.2012.
N. Moszner, U. Salz, P. Burtscher, R. Liska, A. Gugg, C. Gorsche:
"Polymerizable compositions with improved through-curing depth";
Patent: USA,
Nr. Us8557888 (b2);
eingereicht: 19.11.2010,
erteilt: 15.10.2013.
N. Moszner, U. Salz, P. Burtscher, R. Liska, A. Gugg, C. Gorsche:
"Polymerizable compositions with improved through-curing depth";
Patent: Europa,
Nr. Ep2455059 (b1);
eingereicht: 19.11.2010,
erteilt: 04.06.2014.
N. Moszner, U. Salz, P. Burtscher, R. Liska, A. Gugg, C. Gorsche:
"Polymerizable compositions with improved through-curing depth";
Patent: Japan,
Nr. Jp5661596 (b2);
eingereicht: 19.11.2010,
erteilt: 28.01.2015.
N. Moszner, U. Salz, U. Fischer, R. Liska, H. Gruber, B. Ganster:
"Photopolymerizable Polymerizable compositions of binder with acylgermane initiators, preparation of moldings and other uses";
Patent: Eu, Usa, Jp,
Nr. Ep 1905415 B1; Us7605190 B2; Jp2008088432;
eingereicht: 27.09.2006,
erteilt: 01.07.2009.
N. Moszner, U. Salz, U. Fischer, R. Liska, H. Gruber, B. Ganster:
"Photopolymerizable Polymerizable compositions of binder with acylgermane initiators, preparation of moldings and other uses";
Patent: USA,
Nr. Us7605190 (b2);
eingereicht: 27.09.2006,
erteilt: 20.10.2009.
N. Moszner, U. Salz, U. Fischer, R. Liska, H. Gruber, B. Ganster:
"Photopolymerizable Polymerizable compositions of binder with acylgermane initiators, preparation of moldings and other uses";
Patent: Japan,
Nr. Jp5097494 (b2);
eingereicht: 27.09.2006,
erteilt: 12.12.2012.
N. Moszner, W. Wachter, C. Appert, V. Rheinberger, R. Liska, J. Stampfl, J. Patzer:
"Lichthärtende Schlicker für die stereolithographische Herstellung von Dentalkeramiken";
Patent: Europa,
Nr. EP2151214;
eingereicht: 30.07.2008,
erteilt: 23.01.2013.
N. Moszner, W. Wachter, C. Appert, V. Rheinberger, R. Liska, J. Stampfl, J. Patzer:
"Light-curing slips for the stereolithographic preparation of dental ceramics";
Patent: USA,
Nr. US 2010-0029801;
eingereicht: 27.02.2009.
N. Moszner, W. Wachter, C. Appert, V. Rheinberger, R. Liska, J. Stampfl, J. Patzer:
"Photo-curable slip for preparing dental ceramic by three dimensional lithography";
Patent: Japan,
Nr. JP2010031279 (a);
eingereicht: 29.07.2009.
N. Moszner, W. Wachter, C. Appert, V. Rheinberger, R. Liska, J. Stampfl, J. Patzer:
"Photo-curable slip for preparing dental ceramic by three dimensional lithography";
Patent: USA,
Nr. Us7927538 (b2);
eingereicht: 29.07.2009,
erteilt: 19.04.2011.
N. Moszner, W. Wachter, C. Appert, V. Rheinberger, R. Liska, J. Stampfl, J. Patzer:
"Photo-curable slip for preparing dental ceramic by three dimensional lithography";
Patent: Europa,
Nr. Ep2151214 (b1);
eingereicht: 29.07.2009,
erteilt: 23.01.2013.
N. Moszner, W. Wachter, C. Appert, V. Rheinberger, R. Liska, J. Stampfl, J. Patzer:
"Photo-curable slip for preparing dental ceramic by three dimensional lithography";
Patent: Japan,
Nr. Jp5571917 (b2);
eingereicht: 29.07.2009,
erteilt: 13.08.2014.
N. Moszner, F. Zeuner, V. Rheinberger, I. Lamparth, U. Fischer, R. Liska:
"Polymerisable compound with multiple germanium atoms containing initiators";
Patent: Eu, Usa, Jp,
Nr. Ep2103297 (b1), Us8829067 (b2), Jp5366602 (b2);
eingereicht: 20.03.2008,
erteilt: 09.09.2014.
P. Radovanovic, J. Matovic, R. Liska, M. Kellner:
"Herstellung asymmetrischer Membranen";
Patent: A,
Nr. At511431 (b1);
eingereicht: 01.06.2011.
C. Schnöll, D. Grunenberg, M. Mitterbauer, P. Knaack, R. Liska:
"Verfahren zur Herstellung von Klebebändern";
Patent: Österrech,
Nr. AT523057B1;
eingereicht: 23.01.2020.
C. Schnöll, D. Grunenberg, M. Mitterbauer, P. Knaack, R. Liska:
"Verfahren zur Herstellung von Klebebändern - Process for producing adhesive tapes or molding compounds";
Patent: WO,
Nr. WO 2021148602;
eingereicht: 22.01.2021.
J. Stampfl, H. Gruber, H. Lichtenegger, R. Liska, R. Inführ:
"Polymerisierte Formkörper";
Patent: Österreich,
Nr. At501700 (b1);
eingereicht: 29.06.2006,
erteilt: 15.10.2006.
J. Stampfl, H. Gruber, H. Lichtenegger, R. Liska, R. Inführ:
"Polymerisierte Formkörper";
Patent: Japan,
Nr. 2008-518556;
eingereicht: 29.06.2006,
erteilt: 11.11.2011.
J. Stampfl, H. Gruber, H. Lichtenegger, R. Liska, R. Inführ:
"Polymerisierte Formkörper";
Patent: USA,
Nr. Us8022155 (b2);
eingereicht: 29.06.2006,
erteilt: 20.09.2011.
J. Stampfl, H. Gruber, H. Lichtenegger, R. Liska, R. Inführ:
"Rapid Prototyping Method and Radiation-Curable Composition for Use Therein";
Patent: Europa,
Nr. Ep-1-907 192 B1;
eingereicht: 29.06.2007,
erteilt: 19.11.2008.
J. Stampfl, H. Gruber, H. Lichtenegger, R. Liska, R. Inführ:
"Rapid Prototyping method and radiation-curable composition for use therein";
Patent: USA,
Nr. Us 7 815 835 B2;
eingereicht: 29.06.2006,
erteilt: 29.10.2010.
J. Stampfl, H. Gruber, H. Lichtenegger, R. Liska, R. Inführ:
"Rapid-Prototyping-Verfahren und Verwendung in diesem Verfahren einer strahlungshärtbaren Zusammensetzung";
Patent: Europa, USA,
Nr. Us 7,815,835 B2 Ep 1 907 192 B1;
eingereicht: 29.06.2006,
erteilt: 19.10.2010.
J. Stampfl, H. Gruber, H. Lichtenegger, R. Liska, R. Inführ:
"Rapid-Prototyping-Verfahren und Verwendung in diesem Verfahren einer strahlungshärtbaren Zusammensetzung";
Patent: USA,
Nr. Us7815835 (b2);
eingereicht: 29.06.2006,
erteilt: 19.10.2010.
J. Stampfl, H. Gruber, H. Lichtenegger, R. Liska, R. Inführ:
"Rapid-Prototyping-Verfahren und Verwendung in diesem Verfahren einer strahlungshärtbaren Zusammensetzung";
Patent: Japan,
Nr. Jp4861413 (b2);
eingereicht: 29.06.2006,
erteilt: 25.01.2012.
J. Stampfl, F. Schwager, R. Liska, S. Seidler, H. Gruber:
"Mit Strahlung härtbare wasserlösliche und/oder schmelzbare Zusammensetzung und deren Verwendung für Rapid Prototyping Verfahren";
Patent: Österreich,
Nr. 412.399;
eingereicht: 18.06.2003,
erteilt: 15.07.2004.
B. Steyrer, J. Stampfl, R. Liska:
"Lichthärtbare Zusammensetzung";
Patent: Österreich,
eingereicht: 28.04.2017.
P. Sulek, S. Knaus, R. Liska, A. Liska, H. Gruber, J. Wendrinsky:
"Neue Polymere bzw. gefertigte Gegenstände, Formkörper od. dgl., Verfahren zu deren Herstellung von metallisierten Gegenständen od. dgl. daraus";
Patent: Österreich,
Nr. AT 20030124;
eingereicht: 31.01.2003.
Habilitationsschriften
R. Liska:
"New concepts in photopolymerization";
Technische Universität Wien / Fakultät für Technische Chemie,
2006.
Dissertationen (eigene und begutachtete)
A. Ajami:
"Two‐photon Modification of materials with ultrashort laser radiation: Z‐scan measurements and 3D‐modification of selected materials";
Betreuer/in(nen), Begutachter/in(nen): W. Husinsky, R. Liska;
Institut für Angewandte Physik (IAP),
2012;
Rigorosum: 27.06.2012.
S. Baudis:
"Development and Processing of Materials for Vascular Tissue Regeneration";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, J. Stampfl;
Institu für angewandte Synthesechemie,
2011;
Rigorosum: 11.01.2011.
S. Baumgartner:
"Entwicklung eines hybriden 3D-Druck Prozesses zum Einfärben dentaler Glaskeramiken und selektiver Modifikation von Kunststoffbauteilen";
Betreuer/in(nen), Begutachter/in(nen): J. Stampfl, R. Liska, F. Bircher;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2018;
Rigorosum: 29.11.2018.
S. Benedikt:
"Novel Long-Wavelength Photoinitiators for Dental Applications";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, J. Stampfl;
Institut für Angewandte Synthesechemie,
2015;
Rigorosum: 01.11.2015.
D. Bomze:
"Radical induced Cationic Frontal Polymerization as a new and versatile Curing Technique for Epoxy Resins";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, P. Knaack;
Institut für Angewandte Sythesechemie,
2016;
Rigorosum: 20.10.2016.
B. Busetti:
"Development of a hybrid system for stereolithography-based additive manufacturing";
Betreuer/in(nen), Begutachter/in(nen): J. Stampfl, R. Liska;
Institut für Werkstofwissenschaft und Werkstofftechnologie,
2018;
Rigorosum: 28.05.2018.
C. Dworak:
"Novel Concepts For Photoinitiating Moieties";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, J. Stampfl;
Institut für angewandte Synthesechemie,
2009;
Rigorosum: 23.11.2009.
K. Ehrmann:
"Development of Thermoplastic Elastomers for Cardiovascular Tissue Regeneration";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, S. Baudis;
Institut für Angewandte Synthesechemie,
2020;
Rigorosum: 24.07.2020.
P. Esfandiari:
"Development of 3-D printable materials";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, J. Stampfl;
Institut für angewandte Synthesechemie,
2011;
Rigorosum: 17.01.2011.
B. Ganster:
"Bathochrom verschobene Photoinitiatoren für Dentalformulierungen";
Betreuer/in(nen), Begutachter/in(nen): R. Liska;
E163, Institut für angewandte Synthesechemie,
2008;
Rigorosum: 14.01.2008.
P. Gauss:
"Advanced additives for radical photopolymerization";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, J. Fleig, V. Archodoulaki;
Institut für Angewandte Synthesechemie,
2019;
Rigorosum: 26.03.2019.
C. Gorsche:
"Synthesis and characterization of monomers and additives for photopolymer-based dental restoratives";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, J. Stampfl;
Institut für angewandte Synthesechemie,
2015;
Rigorosum: 05.03.2015.
S. Gruber:
"Lithography-based additive manufacturing of alumina parts";
Betreuer/in(nen), Begutachter/in(nen): J. Stampfl, R. Liska;
Institut für Werkstffwissenschaft und Werkstofftechnologie,
2013;
Rigorosum: 13.12.2013.
A. Gugg:
"Development of Monomers and Additives for Advanced Dental Formulations";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, J. Stampfl;
Institut für angewandte Synthesechemie,
2011;
Rigorosum: 10.11.2011.
G. Harakaly:
"Tough photopolymers for Hot Lithography application";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, C. Gorsche;
Institut für Angewandte Synthesechemie,
2019;
Rigorosum: 29.08.2019.
M. Hartmann:
"Chemische und technologische Optimierung der Lithografie-basierten Additiven Fertigung von Dentalkeramik";
Betreuer/in(nen), Begutachter/in(nen): J. Stampfl, R. Liska, A. Boccaccini;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2020;
Rigorosum: 16.07.2020.
M. Hatzenbichler:
"Selektives Laserschmelzen zur generativen Herstellung von Bauteilen aus Hochleistungswerkstoffen";
Betreuer/in(nen), Begutachter/in(nen): J. Stampfl, R. Liska;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2014;
Rigorosum: 07.03.2014.
C. Heller:
"Biocompatible and Biodegradable Photopolymers by Additive Manufacturing: From Synthesis to In-Vivo Studies";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, J. Stampfl;
TU Wien,
2010;
Rigorosum: 26.04.2010.
M. Höfer:
"Components for visible curable formulations with low oxygen inhibition";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, J. Stampfl;
Institut für angewandte Synthesechemie,
2010;
Rigorosum: 18.01.2010.
A. Hofecker:
"Novel Synthesis of biocompatible Monomers";
Betreuer/in(nen), Begutachter/in(nen): P. Knaack, R. Liska;
Institut für Angewandte Synthesechemie,
2020;
Rigorosum: 21.10.2020.
C. Hofstetter:
"Entwicklung und medizintechnische Anwendung von Vinylester-basierten, biokompatiblen und bioabbaubaren Photopolymeren";
Betreuer/in(nen), Begutachter/in(nen): J. Stampfl, R. Liska, F. Moscato;
Werkstoffwissenschaften und Werkstofftechnik,
2019;
Rigorosum: 28.02.2019.
R. Inführ:
"Mechanisch flexible Wellenleitermaterialien für die 3D-Strukturierung mit 2-Photonenpolymerisation";
Betreuer/in(nen), Begutachter/in(nen): H. Lichtenegger, R. Liska;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2008;
Rigorosum: 29.10.2008.
S. Jauk:
"Kovalent verbundene Typ II Photoinitiatoren";
Betreuer/in(nen), Begutachter/in(nen): R. Liska;
E163, Institut für angewandte Synthesechemie,
2008;
Rigorosum: 03.04.2008.
M. Kellner:
"Entwicklung neuer Materialien für protonenleitende Membranen in Brennstoffzellen";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, V. Archodoulaki;
Institut für Angewandte Synthesechemie,
2013;
Rigorosum: 30.10.2013.
N. Klikovits:
"Thermally promoted cationic photopolymerization of ring-opening monomers for Hot Lithography";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, P. Knaack;
Institut für Angewandte Synthesechemie,
2020;
Rigorosum: 16.07.2020.
S. Kopeinig:
"Synthese und Untersuchung photopolymerisierbarer Gruppen für Silikonbeschichtungen";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, H. Hutter;
E163,
2007.
J. Kupfmüller:
"Strukturierung Polysiloxan-basierender Wellenleitermaterialien mittels 2-Photonen-induzierter Polymerisation";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, J. Stampfl;
Institut für Angewandte Synthesechemie,
2013;
Rigorosum: 06.03.2013.
M. Kury:
"Tough photopolymers for 3D printing";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, C. Gorsche;
Institut für Angewandte Synthesechemie,
2020;
Rigorosum: 29.06.2020.
Z. Li:
"Novel Organic Materials for Multi-photon Photopolymerization and Photografting: Powerful Tools for Precise Microfabracation and Functionalization in 3D";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, J. Stampfl;
Institut für Angewandte Synthesechemie,
2013;
Rigorosum: 11.11.2013.
R. Markut-Kohl:
"Stucture-properties correlations in PE-UHMW: influence of consolidation, crosslinking, sterilization and in vivo use on hip implants";
Betreuer/in(nen), Begutachter/in(nen): S. Seidler, R. Liska;
Werkstoffwissenschaft und Werkstofftechnologie,
2012;
Rigorosum: 11.10.2012.
A. Mautner:
"Development of low cytotoxic Photopolymers";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, J. Stampfl;
Institut für Angewandte Synthesechemie,
2012;
Rigorosum: 09.08.2012.
Y. Mete:
"Novel initiators and green monomers for ionic photopolymerization";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, P. Knaack;
Institut für Angewandte Sythesechemie,
2021;
Rigorosum: 24.03.2021.
G. Mitteramskogler:
"Selektives Einfärben von 3D-gedruckten Bauteilen aus ZrO2";
Betreuer/in(nen), Begutachter/in(nen): J. Stampfl, R. Liska;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2015;
Rigorosum: 05.03.2015.
M. Mitterbauer:
"Tin-based long wavelength photoinitiators for dental composites";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, J. Stampfl;
Institut für Angewandte Synthesechemie,
2019;
Rigorosum: 21.11.2019.
S. Orman:
"Toughening of Photopolymers for Additive Manufacturing of Bone Replacements";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, J. Stampfl;
Institut für Angewandte Synthesechemie,
2018;
Rigorosum: 20.09.2018.
J. Patzer:
"Generative Fertigung von keramischen Bauteilen für dentale Anwendungen";
Betreuer/in(nen), Begutachter/in(nen): J. Stampfl, R. Liska;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2011;
Rigorosum: 14.04.2011.
G. Peer:
"Strategies for shrinkage stress reduction in photopolymers for dental restoratives";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, J. Stampfl;
Institut für Angewandte Synthesechemie,
2020;
Rigorosum: 05.03.2020.
M. Pfaffinger:
"Entwicklung und Optimierung photopolymerisierbarer Schlicker für den Lithography-based Ceramic Manufacturing (LCM) Prozess";
Betreuer/in(nen), Begutachter/in(nen): J. Stampfl, R. Liska;
Inst. für Werkstoffwissenschaft und Werkstofftechnologie,
2017;
Rigorosum: 30.03.2017.
P. Potzmann:
"Energy Efficient UV Polymerization in Aqueous Systems";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, J. Stampfl;
Institut für angewandte Synthesechemie,
2016;
Rigorosum: 24.05.2016.
N.U Pucher:
"Synthesis and Evaluation of Novel Initiators for the Two-Photon Induced Photopolymerization Process - A Precise Tool for Real 3D Sub-Micrometer Laser Structuring";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, J. Stampfl;
Institut für angewandte Synthesechemie,
2010;
Rigorosum: 14.06.2010.
X.H. Qin:
"3D Construction of Artificial ECM Hydrogels by Two-Photon-Induced Polymerization";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, H. Redl, P. Gärtner;
Institut für angewandte Synthesechemie,
2014;
Rigorosum: 27.05.2014.
C. Schnöll:
"New low shrinkage photopolymers and additives for dental restoratives";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, C. Gorsche;
Institut für Angewandte Synthesechemie,
2020;
Rigorosum: 16.07.2020.
C. Schoberleitner:
"Entwicklung einer Werkstoffformulierung zur Robotersanierung von undichten Muffen in Trinkwasserversorgungsleitungen";
Betreuer/in(nen), Begutachter/in(nen): V. Archodoulaki, R. Liska;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2013;
Rigorosum: 20.11.2013.
J.-A. Schönherr:
"Herstellung dentaler Keramikrestaurationen mit laser- und DLP-basierter additiver Fertigung";
Betreuer/in(nen), Begutachter/in(nen): J. Stampfl, A. Schedle, R. Liska;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2018;
Rigorosum: 12.12.2018.
S. Schörpf:
"Novel Monomers with Stress Relaxing and Shrinkage Reducing Characteristics for Dental Restorations";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, C. Gorsche;
Institut für Angewandte Synthesechemie,
2020;
Rigorosum: 17.08.2020.
M. Schuster:
"Photopolymers for bone tissue engeneering";
Betreuer/in(nen), Begutachter/in(nen): R. Liska;
E163, Institut für angewandte Synthesechemie,
2008;
Rigorosum: 16.06.2008.
M. Schwentenwein:
"Development of Tough Photopolymers for Lithography-based Additive Manufacturing Technologies";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, J. Stampfl;
Institut für Angewandte Synthesechemie,
2012;
Rigorosum: 11.04.2012.
K. Seidler:
"Photopolymer Networks with Homogeneous Polymer Architectures";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, C. Gorsche;
Institut für Angewandte Synthesechemie,
2016;
Rigorosum: 20.10.2016.
K. Stadlmann:
"Herstellung von Lichtwellenleitern mittels Zweiphotonenlithographie";
Betreuer/in(nen), Begutachter/in(nen): J. Stampfl, R. Liska;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2011;
Rigorosum: 10.11.2011.
P. Steinbauer:
"Photopolymerizable Adhesives for Bone Healing";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, S. Baudis;
Institut für Angewandte Sythesechemie,
2021;
Rigorosum: 17.03.2021.
J. Steindl:
"New Monomers for Tough Photopolymers";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, C. Gorsche;
Institut für Angewandte Sythesechemie,
2021;
Rigorosum: 07.04.2021.
B. Steyrer:
"Thermoplastartige Photopolymere für den lithographiebasierten 3D-Druck";
Betreuer/in(nen), Begutachter/in(nen): J. Stampfl, R. Liska;
Institut für Werkstofwissenschaft und Werkstofftechnologie,
2018;
Rigorosum: 28.05.2018.
P. Tesavibul:
"Manufacturing and fixation of oxide-ceramic implants using additive manufacturing and light curing bio-adhesives";
Betreuer/in(nen), Begutachter/in(nen): J. Stampfl, R. Liska;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2012;
Rigorosum: 10.08.2012.
J. Torgersen:
"Novel biocompatible materials for in situ two-photon polymerisation";
Betreuer/in(nen), Begutachter/in(nen): J. Stampfl, R. Liska;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2013;
Rigorosum: 21.03.2013.
A.D. Tran:
"Radical Induced Cationic Frontal Polymerisation for Preparation of Epoxy Composites";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, P. Knaack;
Institut für Angewandte Sythesechemie,
2020;
Rigorosum: 21.12.2020.
M. Tromayer:
"Novel Biocompatible Initiators for Direct Cell Encapsulation via Two-Photon Induced Photopolymerization";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, J. Stampfl;
Institut für Angewandte Synthesechemie,
2018;
Rigorosum: 29.08.2018.
E. Zerobin:
"Two-Photon Initiators and Macromers for Biomedical Applications";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, S. Baudis;
Institut für Angewandte Sythesechemie,
2021;
Rigorosum: 08.03.2021.
Diplom- und Master-Arbeiten (eigene und betreute)
C. Balka:
"Optimierung Zirkonoxidgefüllter Photopolymere für den 3D-Druck";
Betreuer/in(nen): J. Stampfl, R. Liska;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2014;
Abschlussprüfung: 07.03.2014.
S. Baudis:
"Development of biophotopolymers as biocompatible cardiovascular replacement materials";
Betreuer/in(nen): R. Liska, J. Stampfl;
Institut für Angewandte Synthesechemie,
2007;
Abschlussprüfung: 12.11.2007.
S. Baumgartner:
"3D-Printing of therapeutic nano-particles";
Betreuer/in(nen): J. Stampfl, R. Liska;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2015;
Abschlussprüfung: 26.03.2015.
D. Bomze:
"Modication of Poly(vinyl alcohol) for Two Photon Polymerisation via Thiol-Ene Chemistry";
Betreuer/in(nen): R. Liska, J. Stampfl;
Institut für Angewandte Synthesechemie,
2013;
Abschlussprüfung: 28.10.2013.
B. Dellago:
"New cleavable moieties for biodegradable photopolymers";
Betreuer/in(nen): R. Liska, S. Baudis;
Institut für Angewandte Synthesechemie,
2019;
Abschlussprüfung: 09.09.2019.
P. Dorfinger:
"Lithographiebasierte Herstellung metallischer Bauteile";
Betreuer/in(nen): J. Stampfl, R. Liska;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2013;
Abschlussprüfung: 31.01.2013.
B. Feyerabend:
"Alternative Polymerwerkstoffe zum PTFE. Eigenschaftsspezifische und anwendungsorientierte Betrachtungen unter dem Aspekt einer möglichen Werkstoffsubstitution";
Betreuer/in(nen): V. Archodoulaki, R. Liska;
Werkstoffwissenschaft und Werkstofftechnologie,
2013;
Abschlussprüfung: 25.02.2013.
M. Fitzka:
"A systematic study on self-reinforcing thermoplastic urethane/urea elastomers";
Betreuer/in(nen): R. Liska, S. Baudis, K. Ehrmann;
Institut für Angewandte Sythesechemie,
2021;
Abschlussprüfung: 07.09.2021.
N. Fuß:
"Synthese und photochemische Eigenschaften neuer Enon- und Inon-artiger Typ I- Photoinitiatoren";
Betreuer/in(nen): R. Liska;
E163 Institut für Angewandte Synthesechemie,
2004.
B. Ganster:
"Hydrophile Photoinitiatoren für Dentalformulierungen";
Betreuer/in(nen): R. Liska;
E163 Institut für Angewandte Synthesechemie,
2005.
P. Gauss:
"RAFT and AFCT in Debonding on Demand of Dental Materials";
Betreuer/in(nen): R. Liska, J. Stampfl, H. Hutter;
Institut für angewandte Synthesechemie,
2014;
Abschlussprüfung: 25.11.2014.
C. Gorsche:
"UV-initiated Frontal Polymerization in Dental Materials";
Betreuer/in(nen): R. Liska, J. Stampfl, H. Hutter;
Institut für angewandte Synthesechemie,
2011;
Abschlussprüfung: 27.04.2011.
S. Gruber:
"Fabrication and Evaluation of Multi-material structures made by additive manufacturing";
Betreuer/in(nen): J. Stampfl, R. Liska;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2010;
Abschlussprüfung: 13.10.2010.
A. Gugg:
"Photoinitiatoren auf Basis von Halbmetallen";
Betreuer/in(nen): R. Liska;
E163, Institut für angewandte Synthesechemie,
2008;
Abschlussprüfung: 09.06.2008.
C. Haderer:
"Immobilisierte Fluoreszenzsensoren für die extrakorporale Blutreinigung";
Betreuer/in(nen): R. Liska;
E163 Institut für Angewandte Synthesechemie,
2006;
Abschlussprüfung: 07.06.2006.
K. Hager:
"High-Temperature Materials for Hot Lithography";
Betreuer/in(nen): R. Liska, C. Gorsche, K. Seidler;
Institut für Angewandte Synthesechemie,
2020;
Abschlussprüfung: 04.03.2020.
L. Heißenberger:
"Biodegradable thermoplastic polyurethanes for vascular tissue regeneration: synthesis of alternative/new building blocks";
Betreuer/in(nen): R. Liska, C. Dworak;
Institut für Angewandte Synthesechemie E-163,
2015;
Abschlussprüfung: 03.12.2015.
S. Helfert:
"Synthesis and Characterization of Polymer-Linker Systems for T-cell Activation";
Betreuer/in(nen): R. Liska, C. Dworak, E. Sevcsik;
Institut für Angewandte Synthesechemie E-163,
2017;
Abschlussprüfung: 31.03.2017.
C. Heller:
"Synthese und Prüfung neuer Alkin-basierender Photoinitiatoren";
Betreuer/in(nen): R. Liska;
Technische Universität Wien / Fakultät für Technische Chemie,
2007;
Abschlussprüfung: 08.01.2007.
M. Höfer:
"Reaktionen mit Singulettsauerstoff";
Betreuer/in(nen): R. Liska;
E163 Institut für Angewandte Synthesechemie,
2006;
Abschlussprüfung: 24.04.2006.
F. Höller:
"Laser Microfabrication of Elastic 3D Scaffolds";
Betreuer/in(nen): J. Stampfl, R. Liska;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2013;
Abschlussprüfung: 25.06.2013.
C. Hofstetter:
"Prozessoptimierung für lithographiebasierte generative Fertigung";
Betreuer/in(nen): J. Stampfl, R. Liska;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2014;
Abschlussprüfung: 07.03.2014.
R. Inführ:
"Entwicklung von Photopolymeren für Rapid Prototyping zur Herstellung von zellularen organolöslichen Abformmaterialien";
Betreuer/in(nen): R. Liska;
E163 Institut für Angewandte Synthesechemie,
2005.
K. Kalinyaprak-Icten:
"Kreuzkonjugierte Photoinitiatoren";
Betreuer/in(nen): R. Liska;
E163 Institut für Angewandte Synthesechemie,
2005.
N. Klikovits:
"Cationic Photoinitiators based on Aluminium";
Betreuer/in(nen): R. Liska, P. Knaack;
Institut für Angewandte Synthesechemie E-163,
2017;
Abschlussprüfung: 27.03.2017.
B. Koch:
"Tailored urethane methacrylates for tough, thermoplastic-like photopolymers via Hot Lithography";
Betreuer/in(nen): M. Kury, C. Gorsche, R. Liska;
Institut für Angewandte Synthesechemie,
2019;
Abschlussprüfung: 18.06.2019.
S. Kopeinig:
"Photoinitiatoren mit kovalent verknüpften Sensibilisatoren";
Betreuer/in(nen): R. Liska;
E163 Institut für Angewandte Synthesechemie,
2004.
S. Krivec:
"Porous Hybrid Materials as Carrier for Polymeric Waveguides";
Betreuer/in(nen): R. Liska;
E163, Institut für angewandte Synthesechemie,
2008;
Abschlussprüfung: 09.06.2008.
J. Kumpfmüller:
"Strukturierung Polysiloxan-basierender Wellenleitermaterialien mittels 2-Photonen-induzierter Polymerisation";
Betreuer/in(nen): R. Liska, J. Stampfl, H. Hutter;
Institut für angewandte Synthesechemie,
2010;
Abschlussprüfung: 11.01.2010.
M. Kury:
"Mechanistic investigations of chain transfer reagents";
Betreuer/in(nen): R. Liska, C. Gorsche;
Institut für Angewandte Synthesechemie,
2016;
Abschlussprüfung: 18.11.2016.
S. Landertshamer:
"Photoinitiatoren für die kationische Polymerisation von Siliconen";
Betreuer/in(nen): R. Liska;
E163, Institut für angewandte Synthesechemie,
2008;
Abschlussprüfung: 09.06.2008.
J. Leiter:
"Hybrid Photopolymere für Rapid Prototyping";
Betreuer/in(nen): R. Liska, J. Stampfl;
Institut für Angewandte Synthesechemie,
2007;
Abschlussprüfung: 08.01.2007.
M. Leitgeb:
"Herstellung und Charakterisierung flexibler Stempel für R2R-Nanoprägen";
Betreuer/in(nen): R. Liska, J. Stampfl, H. Hutter;
Institut für angewandte Synthesechemie,
2014;
Abschlussprüfung: 06.03.2014.
J. Leitner:
"Hybrid Photopolymere für Rapid Prototyping";
Betreuer/in(nen): R. Liska;
Technische Universität Wien / Fakultät für Technische Chemie,
2007;
Abschlussprüfung: 08.01.2007.
L. Leutgeb:
"Investigation of the influence of different substituents in tetraacylgerman-based photoinitiators";
Betreuer/in(nen): S. Baudis, R. Liska;
Institut für Angewandte Synthesechemie,
2020;
Abschlussprüfung: 04.11.2020.
F. Mayer:
"Interpenetrating polymer networks for 3D printing";
Betreuer/in(nen): R. Liska, K. Ehrmann;
Institut für Angewandte Sythesechemie,
2021;
Abschlussprüfung: 23.09.2021.
Y. Mete:
"Photopolymerization in filled systems";
Betreuer/in(nen): R. Liska, P. Knaack;
Institut für Angewandte Synthesechemie,
2017;
Abschlussprüfung: 27.02.2017.
G. Mitteramskogler:
"Generative Fertigung von Bauteilen aus TCP";
Betreuer/in(nen): J. Stampfl, R. Liska;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2011;
Abschlussprüfung: 23.05.2011.
M. Mitterbauer:
"Synthesis of novel Si-based long wavelength photoinitiators for dental applications";
Betreuer/in(nen): R. Liska;
Institut für Angewandte Synthesechemie,
2016;
Abschlussprüfung: 25.01.2016.
F. Oberleiter:
"Optimierung spritzbarer Biokomposit Materialien";
Betreuer/in(nen): J. Stampfl, R. Liska;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2010;
Abschlussprüfung: 29.03.2010.
S. Orman:
"Biocompatible Composite Photopolymers for 3D Printing";
Betreuer/in(nen): R. Liska, J. Stampfl, H. Hutter;
Institut für angewandte Synthesechemie,
2015;
Abschlussprüfung: 22.04.2015.
G. Peer:
"New monomers for radical photopolymerization";
Betreuer/in(nen): R. Liska, C. Gorsche;
Institut für Angewandte Synthesechemie,
2017;
Abschlussprüfung: 27.01.2017.
C. Pich:
"Sauerstoffinhibierung in Silicone Release Coatings";
Betreuer/in(nen): R. Liska;
E163 Institut für Angewandte Synthesechemie,
2006;
Abschlussprüfung: 24.04.2006.
F. Pieringer:
"Group Transfer Polymerization for dental application";
Betreuer/in(nen): R. Liska, P. Knaack;
Institut für Angewandte Sythesechemie,
2021;
Abschlussprüfung: 07.09.2021.
P. Potzmann:
"New building blocks for thermoplastic polyurethane elastomers for vascular tissue engineering";
Betreuer/in(nen): R. Liska, J. Stampfl;
Institut für Angewandte Synthesechemie,
2013;
Abschlussprüfung: 06.03.2013.
N.U Pucher:
"Synthese neuer Photoinitiatoren für die Zwei-Photonen-induzierte Stereolithographie";
Betreuer/in(nen): R. Liska;
E163 Institut für Angewandte Synthesechemie,
2006;
Abschlussprüfung: 13.11.2006.
M. Redl:
"Lithographic 3D printing of SiC-based ceramics";
Betreuer/in(nen): R. Liska, J. Stampfl;
Institut für Angewandte Synthesechemie,
2019;
Abschlussprüfung: 09.09.2019.
A. Rizk:
"Characterization and development of biocompatible and -degradable photopolymers for lithographybased additive manufacturing";
Betreuer/in(nen): J. Stampfl, R. Liska;
Inst. für Werkstoffwissenschaft und Werkstofftechnologie,
2019;
Abschlussprüfung: 31.01.2019.
L. Ruppitsch:
"Cyclopolymerizable Monomers for Radical Photopolymerization based on Difunctional (Meth)acrylamides";
Betreuer/in(nen): G. Peer, R. Liska;
Institut für Angewandte Synthesechemie,
2020;
Abschlussprüfung: 21.10.2020.
F. Schacherreiter:
"Fertigung von Scaffolds aus Biophotoelastomeren mittels Zweiphotonenpolymerisation";
Betreuer/in(nen): J. Stampfl, R. Liska;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2011;
Abschlussprüfung: 05.12.2011.
C. Schnöll:
"Investigation of various blocked isocyanates for Debonding on Demand";
Betreuer/in(nen): R. Liska, C. Gorsche;
Institut für Angewandte Synthesechemie,
2016;
Abschlussprüfung: 17.03.2016.
M. Schuster:
"Photopolymerisierbare Biopolymere für Knochenersatzmaterialien";
Betreuer/in(nen): R. Liska;
E163 Institut für Angewandte Synthesechemie,
2005.
F. Schwager:
"Wasserlösliche Polymere für Rapid Prototyping Verfahren";
Betreuer/in(nen): R. Liska;
E163 Institut für Angewandte Synthesechemie,
2003.
M. Schwentenwein:
"New monomers for tissue engineering by stereolithography";
Betreuer/in(nen): R. Liska, J. Stampfl;
Institut für Angewandte Synthesechemie,
2008;
Abschlussprüfung: 17.11.2008.
B. Seidl:
"Synthese und Prüfung neuer Inon-artiger Photoinitiatoren";
Betreuer/in(nen): R. Liska;
E163 Institut für Angewandte Synthesechemie,
2002.
K. Seidler:
"Development of biodegradable thermoplastic polyurethane elastomers for electrospinning of vascular grafts";
Betreuer/in(nen): R. Liska, J. Stampfl, H. Hutter;
Institut für Angewandte Synthesechemie,
2012;
Abschlussprüfung: 21.12.2012.
L. Sinawehl:
"Cationic Photopolymerization in Hot Lithography";
Betreuer/in(nen): R. Liska, J. Stampfl;
Institut für Angewandte Synthesechemie,
2019;
Abschlussprüfung: 16.12.2019.
S. Springer:
"Generative Fertigung von Bauteilen aus Al2O3";
Betreuer/in(nen): J. Stampfl, R. Liska;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2011;
Abschlussprüfung: 10.03.2011.
S. Stanic:
"Hochgefüllte Hydrogele als Biokomposite und Keramikpräkursor für 3D Druck Anwendungsbereiche";
Betreuer/in(nen): R. Liska, S. Baudis;
Institut für Angewandte Synthesechemie,
2018;
Abschlussprüfung: 29.01.2018.
P. Steinbauer:
"RAFT Polymers for Tissue Regeneration";
Betreuer/in(nen): R. Liska, S. Baudis;
Institut für Angewandte Synthesechemie,
2018;
Abschlussprüfung: 29.01.2018.
J. Steindl:
"Kettentransferreagenzien auf Basis von Silizium";
Betreuer/in(nen): R. Liska, C. Gorsche;
Institut für Angewandte Synthesechemie,
2016;
Abschlussprüfung: 17.03.2016.
Ch. Straif:
"Novel Coatings Systems for Space Enviromental Protection of High Performance Polymers";
Betreuer/in(nen): R. Liska;
E163 Institut für Angewandte Synthesechemie,
2006;
Abschlussprüfung: 13.11.2006.
T. Swetly:
"Generative Fertigung von Bauteilen aus Siliziumnitrid";
Betreuer/in(nen): J. Stampfl, R. Liska;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2011;
Abschlussprüfung: 21.10.2011.
R. Taschner:
"Biocompatible Photoinitiators based on Poly-α-ketoesters";
Betreuer/in(nen): R. Liska, P. Knaack;
Institut für Angewandte Synthesechemie,
2019;
Abschlussprüfung: 26.02.2019.
T. Theuer:
"Entwicklung 3D-druckbarer Materialien für die Orthodontie";
Betreuer/in(nen): J. Stampfl, R. Liska;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2019;
Abschlussprüfung: 12.06.2019.
Z. Tomasikova:
"Hydrogels for Tissue Engineering";
Betreuer/in(nen): R. Liska, J. Stampfl, H. Redl;
Institut für angewandte Synthesechemie,
2015;
Abschlussprüfung: 22.04.2015.
J. Torgersen:
"In-Vivo-Writing using Two-Photon Lithography";
Betreuer/in(nen): J. Stampfl, R. Liska;
TU Wien,
2010;
Abschlussprüfung: 24.03.2010.
M. Tromayer:
"Novel Multipolar Initiators for Two-Photon Induced Photopolymerization";
Betreuer/in(nen): R. Liska, J. Stampfl, P. Gärtner;
Institut für angewandte Synthesechemie,
2014;
Abschlussprüfung: 06.03.2014.
G. Ullrich:
"Funktionelle Photoinitiatoren für den Einsatz in der Dentaltechnik";
Betreuer/in(nen): R. Liska;
E163 Institut für Angewandte Synthesechemie,
2002.
T. Verdianz:
"Grundlegende Untersuchungen zur Oberflächenmodifizierung von Polyimiden";
Betreuer/in(nen): R. Liska;
E163 Institut für Angewandte Synthesechemie,
2002.
H. Wiesbauer:
"Photochemische Modifizierung von Polymeren mittels funktioneller Maleinimide";
Betreuer/in(nen): R. Liska;
E163 Institut für Angewandte Synthesechemie,
2005.
D. Wottawa:
"Thermal initiators and stabilizers for cationic frontal polymerization";
Betreuer/in(nen): R. Liska, P. Knaack, M. Mitterbauer;
Institut für Angewandte Synthesechemie,
2020;
Abschlussprüfung: 18.06.2020.
E. Zerobin:
"Two-Photon Structured Hydrogels based on Hyaluronic Acid for Applications in Tissue Engineering";
Betreuer/in(nen): R. Liska, S. Baudis;
Institut für Angewandte Synthesechemie,
2017;
Abschlussprüfung: 22.03.2017.
A. Zimmermann:
"Funktionelle Tenside als Temlplate für Sol-Gel-Prozesse";
Betreuer/in(nen): R. Liska;
E163 Institut für Angewandte Synthesechemie,
2006.
N. Zwirchmayr:
"Synthesis of segmented linear thermoplastic urethane elastomers for electrospinning of vascular grafts";
Betreuer/in(nen): R. Liska, W. Linert, H. Hutter;
Institut für angewandte Synthesechemie,
2014;
Abschlussprüfung: 28.07.2014.
Wissenschaftliche Berichte
P. Esfandiari, R. Liska:
"Development of monomer formulation for RP";
Bericht für Huntsman;
2008;
14 S.
P. Esfandiari, R. Liska:
"Evaluation of new Formulations";
Bericht für Huntsman;
2008;
20 S.
P. Esfandiari, R. Liska:
"Interaction of Additives in Photopolymerizable Formulations";
Bericht für Huntsman;
2009;
13 S.
P. Esfandiari, R. Liska:
"Molecular Weight distribution in Photopolymerizable Formulations";
Bericht für Huntsman;
2009;
11 S.
P. Esfandiari, R. Liska:
"Photo-DSC of new Formulations";
Bericht für Huntsman;
2009;
9 S.
P. Esfandiari, R. Liska:
"Rheological Investigations of new Formulations";
Bericht für Huntsman;
2009;
13 S.
P. Esfandiari, R. Liska:
"Screening of additives for RP";
Bericht für Huntsman;
2008;
7 S.
P. Esfandiari, R. Liska:
"State of the art in Rapid prototyping formulations";
Bericht für Huntsman;
2008;
11 S.
P. Esfandiari, R. Liska:
"Synthesis of new components I";
Bericht für Huntsman;
2010;
9 S.
P. Esfandiari, R. Liska:
"Synthesis of new components II";
Bericht für Huntsman;
2010;
12 S.
P. Esfandiari, R. Liska:
"Synthesis of new monomers";
Bericht für Huntsman;
2008;
16 S.
S. Gruber, J. Stampfl, R. Felzmann, S. Springer, R. Liska:
"Lithographiebasierte Fertigung keramischer Bauteile";
Berichts-Nr. ISSN: 1614-0923,
2011.
A. Gugg, R. Liska:
"Acylgermaniumverbindungen";
Bericht für Ivoclar Vivadent AG;
2008;
15 S.
A. Gugg, R. Liska:
"Acylgermaniumverbindungen II";
Bericht für Ivoclar Vivadent AG;
2008;
16 S.
A. Gugg, R. Liska:
"Lagerstabilitätsuntersuchungen für Dentale Füllmaterialien";
Bericht für Ivoclar Vivadent;
2009;
24 S.
A. Gugg, R. Liska:
"Molekulargewichtsbestimmung";
Bericht für Ivoclar Vivadent;
2009;
17 S.
A. Gugg, R. Liska:
"Neue Konzepte für Dentale Füllmaterialien";
Bericht für Ivoclar Vivadent;
2008;
14 S.
A. Gugg, R. Liska:
"Reaktivitäten spezieller Formulierungen";
Bericht für Ivoclar Vivadent;
2010;
35 S.
A. Gugg, R. Liska:
"Reaktivitätsmessungen spezieller Formulierungen";
Bericht für Ivoclar Vivadent;
2009;
19 S.
A. Gugg, R. Liska:
"Synthese neuer Monomere für Dentale Füllmaterialien";
Bericht für Ivoclar Vivadent;
2009;
20 S.
C. Haderer, R. Liska, S. Knaus, H. Gruber:
"Immobilisierte Fluoreszenssensoren für die extrakorporale Blutreinigung";
Bericht für Donau Universität, Krems;
2006;
75 S.
D. Herzog, R. Liska:
"Synthese und Prüfung funktioneller Campherchinone";
Bericht für IVOCLAR AG;
2002.
S. Landertshamer, R. Liska:
"Hydrophobe Komponenten für die Kationische Photopolymerisation von Siliconen";
Bericht für Goldschmidt Evonik;
2008;
17 S.
S. Landertshamer, R. Liska:
"Photoinitiatoren für die Kationische Photopolymerisation von Siliconen";
Bericht für Goldschmidt Evonik;
2008;
14 S.
R. Liska:
"Bericht für FWF: Photoinitiatoren mit kreuz-konjugiertem System - P18623-N17";
Bericht für FWF;
2008;
8 S.
R. Liska:
"Biophotopolymere für Rapid Prototyping";
Bericht für ISOTEC Projekt Meeting;
2005;
10 S.
R. Liska:
"Cross-conjugated Photoinitiators";
Bericht für FWF;
Berichts-Nr. FWF (P18623-N17),
2007;
5 S.
R. Liska:
"Photochemie von Diynonen - Zwischenbericht";
Bericht für FWF;
Berichts-Nr. FWF (Projekt P18623-N17),
2007;
13 S.
R. Liska:
"Photoinitiatoren mit ß-phenyloger Spaltung - P19769-N14";
Bericht für FWF;
2008;
8 S.
R. Liska, B. Ganster:
"Lagerstabilitäts- und Reaktivitätsuntersuchungen neuer Typ I Photoinitiatoren";
Bericht für Ivoclar Vivadent;
2005;
12 S.
R. Liska, B. Ganster:
"Neue Konzepte für bathochrom verschobene Photoinitiatoren";
Bericht für Ivoclar Vivadent;
2005;
29 S.
R. Liska, B. Ganster:
"Photochemie bathochrom verschobener Photoinitiatoren";
Bericht für Ivoclar Vivadent;
2007;
49 S.
R. Liska, B. Ganster:
"Photoinitiatoren mit Absorption im Vis-Bereich";
Bericht für Ivoclar Vivadent;
2006;
25 S.
R. Liska, B. Ganster:
"Photoinitiatoren mit hydrophilen Gruppen";
Bericht für Ivoclar Vivadent;
2005;
15 S.
R. Liska, B. Ganster:
"Photolysestudien an bathochrom verschobenen Photoinitiatoren";
Bericht für Ivoclar Vivadent;
2007;
15 S.
R. Liska, B. Ganster:
"Photoprodukte aus bathochrom verschobenen Photoinitiatoren";
Bericht für Ivoclar Vivadent;
2007;
27 S.
R. Liska, B. Ganster:
"Synthese bathochrom verschobener Photoinitiatoren";
Bericht für Ivoclar Vivadent;
2006;
24 S.
R. Liska, B. Ganster:
"Synthese neuer Typ I Initiatoren für die Photopolymerisation im sichtbaren Lichtbereich";
Bericht für Ivoclar Vivadent;
2004.
R. Liska, B. Ganster, A. Gugg:
"Photoinitiatoren auf Basis von Acylgermaniumverbindungen";
Bericht für Ivoclar Vivadent;
2007;
17 S.
R. Liska, C. Haderer:
"Immobilisierte Fluoreszenzsensoren für die extrakorporale Blutreinigung";
Bericht für Donauuniversität Krems, Center for Biomedical Technology;
2005;
22 S.
R. Liska, C. Haderer:
"Synthese von Fluoreszenzsensoren";
Bericht für Donauuniversität Krems, Center for Biomedical Technology;
2006;
13 S.
R. Liska, M. Höfer:
"Endoperoxide mit singulett Sauerstoff";
Bericht für Ivoclar Vivadent;
2006;
26 S.
R. Liska, M. Höfer:
"Reaktionen mit singulett Sauerstoff";
Bericht für Ivoclar Vivadent;
2005;
19 S.
R. Liska, S. Knaus, H. Gruber:
"Functionalization of PTHF";
Bericht für Elemntis;
2005.
R. Liska, S. Knaus, H. Gruber:
"Viscosity Measurements";
Bericht für Elementis;
2005.
R. Liska, S. Kopeinig:
"Äqulibrierung von Polysiloxanen";
Bericht für NBG;
2005;
13 S.
R. Liska, S. Kopeinig:
"Equilibrierungsreaktionen in Siliconharzen";
Bericht für NBG Coatings;
2006;
29 S.
R. Liska, S. Kopeinig:
"Evaluierung neuer photoreaktiver Gruppen für Siliconharze";
Bericht für NBG Coatings;
2004.
R. Liska, S. Kopeinig:
"Evaluierung neuer photoreaktiver Gruppen für Siliconharze";
Bericht für Ivoclar Vivadent;
2006;
28 S.
R. Liska, S. Kopeinig:
"Modellverbindungen für Polysiloxane";
Bericht für NBG Special Coatings;
2006;
18 S.
R. Liska, S. Kopeinig:
"Neue Photoreaktive Gruppen";
Bericht für NBG Coatings;
2005;
8 S.
R. Liska, S. Kopeinig:
"Synthese modifizierter Polysiloxane";
Bericht für NBG;
2005;
17 S.
R. Liska, S. Landertshamer:
"Synthese neuer Sensitizer für die kationische Polymerisation";
Bericht für Evonik Goldschmidt;
2007;
19 S.
R. Liska, C. Pich:
"Additionsreaktionen an funktionellen Polysiloxanen";
Bericht für NBG Coatings;
2005;
6 S.
R. Liska, C. Pich:
"Analyse von Siliconacrylaten";
Bericht für NBG Coatings;
2004.
R. Liska, C. Pich:
"Neue Photoinitiatoren für Silkonacrylate";
Bericht für NBG;
2005;
26 S.
R. Liska, C. Pich:
"Photoreaktivität von Silkonacrylaten";
Bericht für NBG;
2005;
39 S.
R. Liska, C. Pich:
"Reduktion der Sauerstoffinhibierung in Siliconacrylaten";
Bericht für NBG Coatings;
2004.
R. Liska, G. Ullrich:
"Aromatische Amine und Phenylglycinderivate als Coinitiatoren für Campherchinon";
Bericht für Ivoclar Vivadent;
2003.
R. Liska, G. Ullrich:
"Evaluierung verschiedener Coinitiatoren für Campherchinon in der Photopolymerisation";
Bericht für Ivoclar Vivadent;
2003.
R. Liska, G. Ullrich:
"Evaluierung von Photoinitiatoren in wässrigen Primerformulierungen";
Bericht für Ivoclar Vivadent;
2005;
11 S.
R. Liska, G. Ullrich:
"Photochemisch spaltbare Schutzgruppen für N-Phenylglycine";
Bericht für Ivoclar Vivadent;
2003.
R. Liska, G. Ullrich:
"Prüfung der Lagerstabilität neuer Typ I Initiatoren für die Photopolymerisation";
Bericht für Ivoclar Vivadent;
2005;
12 S.
R. Liska, G. Ullrich:
"Synthese alpha-spaltender Photoinitiatoren";
Bericht für Ivoclar Vivadent;
2004.
R. Liska, G. Ullrich:
"Synthese und Prüfung modifizierter N-Phenylglycinderivate für die Photopolymerisation";
Bericht für Ivoclar Vivadent;
2003.
R. Liska, G. Ullrich:
"Synthese und Prüfung neuer Diinone als Photoinitiatoren";
Bericht für Ivoclar Vivadent;
2004.
R. Liska, G. Ullrich:
"Thiouroniumverbindungen für die Photopolymerisation";
Bericht für Ivoclar Vivadent;
2004.
A. Mautner, R. Liska:
"Evaluierung unterschiedlicher Polymere";
Bericht für Synthes;
2009;
21 S.
A. Mautner, R. Liska:
"Herstellung von Probekörpern";
Bericht für Synthes;
2010;
30 S.
A. Mautner, R. Liska:
"Mechanische Eigenschaften";
Bericht für Synthes;
2010;
64 S.
F. Schwager, R. Liska:
"Wasserlösliche Polymere für Rapid Prototyping biometrischer Werkstoffe";
Bericht für Institut für Werkstoffkunde und Materialprüfung - TU Wien;
2002.
G. Ullrich, R. Liska:
"Struktur/Reaktivitätsuntersuchungen an Photoinitiatoren in der Dentaltechnik";
Bericht für IVOCLAR AG;
2002.
T. Verdianz, R. Liska:
"Grundlegende Untersuchungen zur Oberflächenmodifizierung von Polyimiden";
Bericht für VA TECH;
2003.
T. Verdianz, R. Liska:
"Oberflächenmodifizierung von lackierten Kupferdrähten für verbesserte Härtungs- und Haftungseigenschaften mit der umgebenden Harzmatrix";
Bericht für VA TECH ELIN EBG Motoren;
2002.
