TU Home
Diese Publikationsliste wurde automatisch aus den Publikationsdaten der Fakultät für Maschinenwesen und Betriebswissenschaften erstellt. Wenn Sie komplexere Suchabfragen vornehmen wollen, rufen Sie bitte die Seite "Publikationen der Fakultät" direkt auf, oder verwenden Sie die globale Suchfunktion der Publikationsdatenbank der Technischen Universität Wien!


Publikationsdatenbank Home  

Publikationsliste für
Heinz E. Pettermann
E317 - Institut für Leichtbau und Struktur-Biomechanik
als Autorin / Autor bzw. wesentlich beteiligte Person

318 Datensätze (1991 - 2022)


Bücher und Buch-Herausgaben


H. E. Pettermann:
"Derivation and Finite Element Implementation of Constitutive Material Laws for Multiphase Composites Based on Mori-Tanaka Approaches";
VDI Verlag GmbH, Düsseldorf, 1997, ISBN: 3-18-321718-x; 116 S.


Zeitschriftenartikel


P. Hoffmann, S. Moser, C. Kofler, M. Nelhiebel, D. Tscharnuter, B. Karunamurthy, H. E. Pettermann, M. Todt:
"Thermomechanical fatigue damage modeling and material parameter calibration for thin film metallizations";
International Journal of Fatigue, 155 (2022), S. 106627.

B. Werner, O. Červinek, D. Koutný, A.G. Reisinger, H. E. Pettermann, M. Todt:
"Numerical and experimental study on the collapse of a triangular cell under compression";
International Journal of Solids and Structures, 236-237 (2022), S. 111295.

J. Kaul, H. E. Pettermann:
"A constitutive model for fiber reinforced polymer plies - Implicit anisotropic evolution of damage and plasticity based on effective strengths";
Composites Part C: Open Access, 4 (2021), S. 100097.

M. Springer, A. Turon, H. E. Pettermann:
"A thermo-mechanical cyclic cohesive zone model for variable amplitude loading and mixed-mode behavior";
International Journal of Solids and Structures, 159 (2019), S. 257 - 271.

B. Werner, M. Todt, H. E. Pettermann:
"Nonlinear Finite Element Study of Beams with Elasto‐Plastic Damage Behavior in the Post‐Buckling Regime";
PAMM, 19 (2019), 1; 2 S.

H. E. Pettermann, A. DeSimone:
"An anisotropic linear thermo-viscoelastic constitutive law";
Mechanics of Time-Dependent Materials, 22 (2018), 4; S. 421 - 433.

M. Schwab, M. Todt, H. E. Pettermann:
"A multiscale approach for modelling impact on woven composites under consideration of the fabric topology";
Journal of Composite Materials, 52 (2018), 21; S. 2859 - 2874.

M. Schwab, M. Todt, J Tauchner, D. Schlie, H. E. Pettermann:
"Modeling, simulation, and experiments of high velocity impact on laminated composites";
Composite Structures, 205 (2018), S. 42 - 48.

M. Springer, H. E. Pettermann:
"Fatigue life predictions of metal structures based on a low-cycle, multiaxial fatigue damage model";
International Journal of Fatigue, 116 (2018), S. 355 - 365.

M. Schwab, H. E. Pettermann:
"Modeling and Simulation of Damage and Failure in Large Composite Components Subjected to Impact Loads";
Composite Structures, 158 (2016), S. 208 - 216.

M. Schwab, M. Todt, M. Wolfahrt, H. E. Pettermann:
"Failure Mechanism Based Modelling of Impact on Fabric Reinforced Composite Laminates Based on Shell Elements";
Composites Science and Technology, 128 (2016), S. 131 - 137.

M. Springer, M. Nelhiebel, H. E. Pettermann:
"Combined Simulation of Fatigue Crack Nucleation and Propagation Based on a Damage Indicator";
Frattura ed Integrità Strutturale, 38 (2016), S. 155 - 161.

J. Gager, H. E. Pettermann:
"FEM Modeling of Multilayered Textile Composites Based on Shell Elements";
Composites - Part B: Engineering, 77 (2015), S. 46 - 51.

T. Flatscher, C. Schuecker, H. E. Pettermann:
"A Constitutive Ply Model for Stiffness Degradation and Plastic Strain Accumulation: Its Application to the Third World Wide Failure Exercise (Part A)";
Journal of Composite Materials, 47 (2013), S. 2575 - 2593.

T. Flatscher, M. Wolfahrt, G. Pinter, H. E. Pettermann:
"Simulations and Experiments of Open Hole Tension Tests - Assessement of Intra-Ply Plasticity, Damage and Localization";
Composites Science and Technology, 72 (2012), 10; S. 1090 - 1095.

J. Gager, H. E. Pettermann:
"Numerical Homogenization of Textile Composites Based on Shell Element Discretization";
Composites Science and Technology, 72 (2012), 7; S. 806 - 812.

H. E. Pettermann, J. Hüsing:
"Modeling and Simulation of Relaxation in Viscoelastic Open Cell Materials and Structures";
International Journal of Solids and Structures, 49 (2012), S. 2848 - 2853.

D. Duschlbauer, H. J. Böhm, H. E. Pettermann:
"Modeling Interfacial Effects on the Thermal Conduction Behavior of Short Fiber Reinforced Composites";
International Journal of Materials Research, 2011 (2011), 6; S. 717 - 726.

T. Flatscher, H. E. Pettermann:
"A Constitutive Model for Fiber-Reinforced Polymer Plies Accounting for Plasticity and Brittle Damage Including Softening - Implementation for Implicit FEM";
Composite Structures, 93 (2011), 9; S. 2241 - 2249.

H. E. Pettermann, C.O. Huber, M.H. Luxner, S. Nogales, H. J. Böhm:
"An Incremental Mori-Tanaka Homogenization Scheme for Finite Strain Thermoelastoplasticity of MMCs";
Materials, 3 (2010), 1; S. 434 - 451.

H. J. Böhm, D. Duschlbauer, H. E. Pettermann, J. Segurado, A. F. Plankensteiner:
"Modeling of the Densification of Porous Molybdenum by a Unit Cell Approach";
Journal of the Mechanical Behavior of Materials, 19 (2009), 5; S. 289 - 296.

T. Flatscher, C. Schuecker, H. E. Pettermann:
"A Constitutive Model for Continuous Fiber Reinforced Polymer Plies";
PAMM, 9 (2009), S. 23 - 26.

T. Flatscher, C. Schuecker, H. E. Pettermann:
"Prediction of Plastic Strain Accumulation in Continuous Fiber Reinforced Laminates by a Constitutive Ply Model";
International Journal of Fracture, 158 (2009), 2; S. 145 - 156.

M.H. Luxner, J. Stampfl, H. E. Pettermann:
"Nonlinear Simulations on the Interaction of Disorder and Defects in Open Cell Structures";
Computational Materials Science, 47 (2009), 2; S. 418 - 428.

M.H. Luxner, A. Woesz, J. Stampfl, P. Fratzl, H. E. Pettermann:
"A Finite Element Study on the Effects of Disorder in Cellular Structures";
Acta Biomaterialia, 5 (2009), S. 381 - 390.

G. Wimmer, W. Kitzmüller, G. Pinter, T. Wettemann, H. E. Pettermann:
"Computational and Experimental Investigation of Delamination in L-Shaped Laminated Composite Components";
Engineering Fracture Mechanics, 76 (2009), 18; S. 2810 - 2820.

G. Wimmer, H. E. Pettermann:
"Prediction of Delamination Growth in Laminated Structures Loaded by Quasi-Static and Cyclic Loads";
Journal of Composite Materials, 43 (2009), 12; S. 3303 - 3324.

G. Wimmer, C. Schuecker, H. E. Pettermann:
"Numerical Simulation of Delamination in Laminated Composite Components - A Combination of a Strength Criterion and Fracture Mechanics";
Composites - Part B: Engineering, 40 (2009), 2; S. 158 - 165.

H. E. Pettermann:
"Theorie und Anwendung von nichtlinearen Konstitutivgesetzen für Verbundwerkstoffe im Rahmen von FEM Analysen";
NAFEMS Magazin, http://www.nafems.org/downloads/magazin/ (2008), 10; 8 S.

C. Schuecker, H. E. Pettermann:
"Constitutive Ply Damage Modeling, FEM Implementation, and Analysis of Laminated Structures";
Computers and Structures, 86 (2008), 9; S. 908 - 918.

C. Schuecker, H. E. Pettermann:
"Fiber Reinforced Laminates: Progressive Damage Modeling Based on Failure Mechanisms";
Archives of Computational Methods in Engineering, 15 (2008), 2; S. 163 - 184.

G. Wimmer, H. E. Pettermann:
"A Semi-Analytical Model for the Simulation of Delamination in Laminated Composites";
Composites Science and Technology, 68 (2008), 12; S. 2332 - 2339.

M.H. Luxner, J. Stampfl, H. E. Pettermann:
"Numerical simulations of 3D open cell structures - Influence of structural irregularities on elasto-plasticity and deformation localization";
International Journal of Solids and Structures, 44 (2007), S. 2990 - 3003.

D. Duschlbauer, H. J. Böhm, H. E. Pettermann:
"Computational Simulation of Composites Reinforced by Planar Random Fibers: Homogenization and Localization by Unit Cell and Mean Field Approaches";
Journal of Composite Materials, 40 (2006), 24; S. 2217 - 2234.

C. Schuecker, D. H. Pahr, H. E. Pettermann:
"Accounting for Residual Stresses in FEM Analyses of Laminated Structures Using the Puck Criterion for Three-Axial Stress States";
Composites Science and Technology, 66 (2006), 13; S. 2054 - 2062.

C. Schuecker, H. E. Pettermann:
"A Continuum Damage Model for Fiber Reinforced Laminates Based on Ply Failure Mechanisms";
Composite Structures, 76 (2006), 1-2; S. 162 - 173.

J. Stampfl, M.H. Luxner, H. E. Pettermann:
"Zellulare Werkstoffe mit frei wählbarer Zellgeometrie - Herstellung, Modellierung der mechanischen Eigenschaften und Anwendungen";
Lignovisionen, 14 (2006), S. 55 - 60.

G. Wimmer, C. Schuecker, H. E. Pettermann:
"Numerical Simulation of Delamination Onset and Growth in Laminated Composites";
The e-Journal of Nondestructive Testing, 11 (2006), 12; 10 S.

M.H. Luxner, J. Stampfl, H. E. Pettermann:
"Finite Element Modeling Concepts and Linear Analyses of 3D Regular Open Cell Structures";
Journal of Materials Science, 40 (2005), 22; S. 5859 - 5866.

I. Sabirov, D. Duschlbauer, H. E. Pettermann, O. Kolednik:
"The Determination of the Local Conditions for Void Initiation in Front of a Crack Tip for Materials with Second Phase Particles";
Materials Science and Engineering A, 393 (2005), S. 275 - 285.

D. H. Pahr, C. Schuecker, F. G. Rammerstorfer, H. E. Pettermann:
"Numerical Investigations of Perforated Laminates in the Presence of Residual Ply Stresses";
Journal of Composite Materials, 38 (2004), 22; S. 1977 - 1991.

T. Daxner, F. G. Rammerstorfer, J. Segurado, H. E. Pettermann:
"Numerical Simulations of the Creep Deformation of MMCs in 4-Point Bending Mode";
Journal of Engineering Materials and Technology, 125 (2003), 1; S. 50 - 55.

D. Duschlbauer, H. J. Böhm, H. E. Pettermann:
"Numerical Simulation of Thermal Conductivity of MMCs: Effect of Thermal Interface Resistance";
Materials Science and Technology, 19 (2003), 8; S. 1107 - 1114.

D. Duschlbauer, H. E. Pettermann, H. J. Böhm:
"Heat Conduction of a Spheroidal Inhomogeneity with Imperfectly Bonded Interface";
Journal of Applied Physics, 94 (2003), 3; S. 1539 - 1549.

D. Duschlbauer, H. E. Pettermann, H. J. Böhm:
"Mori-Tanaka Based Evaluation of Inclusion Stresses in Composites with Nonaligned Reinforcements";
Scripta Materialia, 48 (2003), 3; S. 223 - 228.

E. Neubauer, C. Eisenmenger-Sittner, H. Bangert, D. Duschelbauer, H. E. Pettermann, G. Korb:
"Tailored Interfaces In Cu-C composite Materials Using Coated Fibers And Hot Pressing Methods";
Mat. Tech & Adv. Perf. Mat., 18 (2003), 3; S. 144 - 149.

E. Neubauer, C. Eisenmenger-Sittner, H. Bangert, D. Duschlbauer, H. E. Pettermann, G. Korb:
"Tailored Interfaces in Cu-C Composite Materials Using Coated Fibers and Hot Pressing Methods";
Materials Technology, 18 (2003), 3; S. 144 - 149.

H. E. Pettermann, H. J. Böhm, J. Alcalá:
"Normalized Diagrams for Micro-Mechanical Estimates of the Elastic Response of Composite Materials";
Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 33A (2002), 10; S. 3187 - 3199.

H. E. Pettermann:
"Numerical simulations of a compositionally graded structure using a hierarchical approach";
Materials Science and Engineering A, 276 (2000), 1-2; S. 277 - 282.

A. Saigal, A.E. Giannakopoulos, S. Suresh, H. E. Pettermann:
"Electrical Response during Indentation of a 1-3 Piezoelectric Ceramic-Polymer Composite";
Journal of Applied Physics, 86 (1999), 1; S. 603 - 606.

A. F. Plankensteiner, H. J. Böhm, F. G. Rammerstorfer, H. E. Pettermann:
"Multiscale Modeling of Highly Heterogeneous Particulate MMCs";
Journal de Physique, 8 (1998), S. 301 - 308.

H. E. Pettermann, H. J. Böhm, F. G. Rammerstorfer:
"Some Direction Dependent Properties of Matrix-Inclusion Type Composites with Given Reinforcement Orientation Distributions";
Composites - Part B: Engineering, 28B (1997), 3; S. 253 - 265.

H. E. Pettermann, T.J. Reiter, F. G. Rammerstorfer:
"Computational Simulation of Internal Bone Remodeling";
Archives of Computational Methods in Engineering, 4 (1997), S. 295 - 323.

E. Weissenbek, H. E. Pettermann, S. Suresh:
"Elasto-Plastic Deformation in Compositionally Graded Metal-Ceramic Structures";
Acta Materialia, 45 (1997), 8; S. 3401 - 3417.

H. E. Pettermann, H. J. Böhm:
"Effective Thermoelastic Behavior of Composites with a Given Orientation Distribution of Inclusions";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, 75 (1995), Supplement 1; S. 161 - 162.

H. E. Pettermann, T.J. Reiter, F. G. Rammerstorfer:
"Ein Simulationsalgorithmus der natürlichen Anpassung des orthotropen Knochenmaterials";
Biomedizinische Technik, 40 (1995), E2; S. 127 - 129.

G. Mailath-Pokorny, H. E. Pettermann, H. J. Böhm, D. Scheidle, W. Lill, G. Watzek:
"Zur Biomechanik der transdentalen Fixation";
Zeitschrift für zahnärztliche Implantologie, 7 (1991), S. 138 - 143.


Buchbeiträge


H. E. Pettermann, C. Schuecker:
"Damage and Failure in Layered Composite Structures";
in: "Encyclopedia of Continuum Mechanics", H. Altenbach, A. Öchsner (Hrg.); Springer, Berlin, Heidelberg, 2020, ISBN: 978-3-662-55771-6, 11 S.

H. J. Böhm, H. E. Pettermann, S. Nogales:
"Continuum Modeling of Diffusive Transport in Inhomogeneous Solids";
in: "Heat Transfer in Multi-Phase Materials", A. Öchsner, G.E. Murch (Hrg.); Springer-Verlag, Berlin, 2011, ISBN: 978-3642044021, S. 3 - 32.

J. Stampfl, H. E. Pettermann, R. Liska:
"Bioinspired Cellular Structures: Additive Manufacturing and Mechanical Properties";
in: "Biomimetics - Materials, Structures and Processes", P. Gruber, D. Bruckner, Ch. Hellmich, H. Schmiedmayer, H. Stachelberger, I. Gebeshuber (Hrg.); Springer-Verlag, Berlin, 2011, ISBN: 978-3642119330, S. 105 - 123.

J. Stampfl, H. E. Pettermann, M.H. Luxner:
"Fabrication and Characterization in the Micro-Nano Range";
in: "Fabrication and Characterization in the Micro/Nano Range", F. Lasagni, A. Lasagni (Hrg.); Springer-Verlag, Berlin, 2011, ISBN: 978-3-642-17781-1, S. 95 - 117.

C. Schuecker, H. E. Pettermann:
"Combining Elastic Brittle Damage with Plasticity to Model the Non-Linear Behavior of Fiber Reinforced Laminates";
in: "Mechanical Response of Composites", P.P. Camanho, C.G. Dávila, S.T. Pinho, J.J.C. Remmers (Hrg.); Springer-Verlag, Berlin, 2008, ISBN: 978-1-4020-8583-3, S. 99 - 117.


Beiträge in Tagungsbänden


M.H. Luxner, H. E. Pettermann:
"Modeling and Simulation of Highly Porous Open Cell Structures: Elasto-Plasticity and Localization Versus Disorder and Defects";
in: "IUTAM Symposium on Mechanical Properties of Cellular Materials", H. Zhao, N. A. Fleck (Hrg.); herausgegeben von: IUTAM; Springer-Verlag, Berlin, 2009, ISBN: 978-1-4020-9403-3, S. 125 - 134.

G. Wimmer, H. E. Pettermann:
"Numerical Simulation of Progressive Growth of Delaminations with Curved Fronts";
in: "Proceedings of Composites 2009", herausgegeben von: ECCOMAS; Imperial College, London, 2009, 6 S.

H. E. Pettermann:
"Theory and Application of Non-Linear Constitutive Laws for Composite Materials within the Framework of FEM Structural Analyses";
in: "Simulating Composite: Materials and Structures", herausgegeben von: NAFEMS; NAFEMS Deutschland, Österreich, Schweiz, Grafing, 2007, ISBN: 978-1-874376-28-6.

M.H. Luxner, J. Stampfl, A. Woesz, P. Fratzl, H. E. Pettermann:
"Influence of Structural Disorder on the Performance of 3D Open Cell Structures";
in: "Proceedings of the III European Conference on Computational Solids and Structural Mechanics", herausgegeben von: ECCOMAS; Associção Portuguesa de Mecânica Teórica, Aplicada e Computacional, Lisboa, 2006, Paper-Nr. 1752, 15 S.

C. Schuecker, H. E. Pettermann:
"Constitutive Ply Damage Modeling, FEM Implementation, and Analyses of Laminated Structures";
in: "Proceedings of the III European Conference on Computational Solids and Structural Mechanics", herausgegeben von: ECCOMAS; Associção Portuguesa de Mecânica Teórica, Aplicada e Computacional, Lisboa, 2006, Paper-Nr. 1759, 11 S.

C. Schuecker, H. E. Pettermann:
"A Mechanism Based Damage Meso-Model for Fiber Reinforced Laminates";
in: "Fifteenth International Conference on Composite Materials (ICCM-15) - Extended Abstracts and Papers", V.E. Verijenko, S. Adali, E. Morosov, C.J. von Klemperer (Hrg.); herausgegeben von: International Committee on Composite Materials; University of KwaZulu-Natal, Durban, 2005, ISBN: 1-86840-589-3, Paper-Nr. 07d, 10 S.

D. H. Pahr, C. Schuecker, F. G. Rammerstorfer, H. E. Pettermann:
"Investigations of Perforated Laminates in the Presence of Residual Stress";
in: "Proceedings of the 11th European Conference on Composite Materials", European Society of Composite Materials, London, 2004, Paper-Nr. C151, 10 S.

C. Schuecker, D. H. Pahr, H. E. Pettermann:
"Numerical Simulation of Composite Structures - First Ply Failure under Non-Proportional Loading";
in: "Multiscaling in Applied Science and Emerging Technology", G.C. Sih, T.B. Kermanidis, S.G. Pantelakis (Hrg.); Laboratory of Technology and Strength of Materials, University of Patras, Patras, 2004, S. 280 - 286.

J. Stampfl, M. Seyr, M.H. Luxner, H. E. Pettermann, A. Wöss, P. Fratzl:
"Regular, Low Density Cellular Structures-Rapid Prototyping, Numerical Simulation, Mechanical Testing";
in: "Biological and Bioinspired Materials and Devices (Mater. Res. Soc. Symp. Proc. 823)", J. Aizenberg, W.J. Landis, C. Orme, R. Wang (Hrg.); herausgegeben von: MRS; Materials Research Society, Warrendale, PA, 2004, ISBN: 1-55899-773-3, Paper-Nr. W8.8, 6 S.

D. Duschlbauer, H. E. Pettermann:
"Numerical Simulation of Composite Materials by Multi-Fiber Unit Cells";
in: "Proceedings of the 21st CAD-FEM User's Meeting 2003", CADFEM GmbH, Grafing, 2003, ISBN: 3-937523-00-6, 6 S.

D. Duschlbauer, H. E. Pettermann, H. J. Böhm:
"Rechnerische Simulation der Wärmeleitungseigenschaften von MMCs mit spezieller Berücksichtigung eines thermischen Widerstandes am Interface";
in: "Verbundwerkstoffe", H.P. Degischer (Hrg.); herausgegeben von: DGM; Wiley-VCH, Weinheim, 2003, ISBN: 3-527-30762-1, S. 555 - 562.

I. Sabirov, D. Duschlbauer, H. E. Pettermann, O. Kolednik:
"The Void Initiation near the Crack Tip in Aluminum Based Metal Matrix Composites;";
in: "Verbundwerkstoffe", H.P. Degischer (Hrg.); herausgegeben von: DGM; Wiley-VCH, Weinheim, 2003, ISBN: 3-527-30762-1, S. 127 - 133.

H. J. Böhm, C.M. Chimani, H. E. Pettermann, A.F. Plankensteiner, F. G. Rammerstorfer:
"Multiscale Treatment of Inhomogeneous Materials by Finite Elements";
in: "Discretization Methods in Structural Mechanics", H.A. Mang, F. G. Rammerstorfer (Hrg.); Kluwer Academic Publishers, Dordrecht, 1999, ISBN: 978-0-7923-5591-5, S. 257 - 264.

H. E. Pettermann, E. Weissenbek, S. Suresh:
"Simulation of the Elasto-Plastic Deformation in Compositionally Graded Metal-Ceramic Structures: Mean-Field and Unit-Cell Approaches";
in: "Functionally Graded Materials", M. Miyamoto, I. Shiota (Hrg.); Elsevier, Amsterdam, 1997, S. 74 - 80.


Vorträge und Posterpräsentationen (mit Tagungsband-Eintrag)


K. Anam, M. Todt, H. E. Pettermann:
"Computationally Efficient Modeling Of Delamination Behavior In Laminated Composites";
Vortrag: 8th ECCOMAS Thematic Conference on the Mechanical Response of Composites, Göteborg; 22.09.2021 - 24.09.2021; in: "Proceedings of the 8th ECCOMAS Thematic Conference on the Mechanical Response of Composites", M. Fagerström, G. Catalanotti (Hrg.); CT02 - Delamination II (2021), S. 1 - 12.

T. Ceglar, H. E. Pettermann:
"Homogenization Of Fiber Reinforced Elastomer Laminates";
Vortrag: 8th ECCOMAS Thematic Conference on the Mechanical Response of Composites, Göteborg; 22.09.2021 - 24.09.2021; in: "Proceedings of the 8th ECCOMAS Thematic Conference on the Mechanical Response of Composites", M. Fagerström, G. Catalanotti (Hrg.); CT10 - Multi-Scale Modelling IV (2021), S. 1 - 7.

P. Hoffmann, M. Nelhiebel, B. Karunamurthy, H. E. Pettermann, M. Todt:
"Simulation of Fatigue Damage in Clusters of DMOS Cells Subjected to Non-Uniform Transient Thermo-Mechnical Loading";
Vortrag: 21st International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), Virtuell; 06.07.2020 - 27.07.2020; in: "2020 21st International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE)", IEEE Xplore, (2020), S. 1 - 9.

J. Kaul, H. E. Pettermann:
"A Constitutive Model For Fiber Reinforced Polymer Plies - Plastic Yielding With Kinematic Hardening Behavior";
Vortrag: 7th ECCOMAS Thematic Conference on the Mechanical Response of Composites, Girona, Spain; 18.09.2019 - 20.09.2019; in: "Proceedings of the 7th ECCOMAS Thematic Conference on the Mechanical Response of Composites", A. Turon, P. Maimí, M. Fagerström (Hrg.); (2019), S. 141 - 152.

H. E. Pettermann, C. Cheyrou, A. DeSimone:
"An Anisotropic Linear Viscoelastic Constitutive Law - Direction Dependent Time Temperature Shift Functions";
Hauptvortrag: 7th ECCOMAS Thematic Conference on the Mechanical Response of Composites, Girona (eingeladen); 18.09.2019 - 20.09.2019; in: "Proceedings of the 7th ECCOMAS Thematic Conference on the Mechanical Response of Composites", A. Turon, P. Maimí, M. Fagerström (Hrg.); (2019), S. 35 - 44.

M. Springer, A. Turon, H. E. Pettermann:
"A Cyclic Cohesive Zone Model Accounting for Changes in the Fatigue Crack Growth Rate Caused by Variable Amplitude Loading and Pre-damaged Interfaces";
Vortrag: 19th International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics (42nd National Symposium on Fatigue and Fracture Mechanics), Denver, Colorado, USA; 15.05.2019 - 17.05.2019; in: "Proceedings of the 19th International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics (42nd National Symposium on Fatigue and Fracture Mechanics)", (2019), S. 1 - 6.

J. Kaul, R. Duy, H. E. Pettermann:
"Multi-Hierarchical Fem Simulations Of A Fabric Laminated Structure Taking Into Account Anisotropic Plasticity And Damage";
Vortrag: 12th International Conference on Composite Science and Technology (ICCST 12), Sorrento, Italy; 08.05.2019 - 10.05.2019; in: "Proceedings of the 12th International Conference on Composite Science and Technology", (2019), S. 1 - 2.

P.F. Fuchs, M.R. Mansouri, T. Ceglar, J. Beter, B. Schrittesser, H. E. Pettermann:
"Berechnung von Lastkopplungen in verstärkten Elastomeren";
Vortrag: 28.Leobener K unststoff-Kolloquium: Simulation in der Kunststofftechnik, Leoben; 25.04.2019 - 26.04.2019; in: "28.Leobener K unststoff-Kolloquium: Simulation in der Kunststofftechnik", Eigenverlag Lehrstuhl für Konstruieren in Kunst- und Verbundstoffen, Department Kunststofftechnik, Montanuniversität Leoben, Schriftenreihe Kunststofftechnik Leoben / 9 / Leoben (2019), ISBN: 978-3-9503248-9-1; S. 44 - 50.

J. Kaul, H. E. Pettermann:
"A constitutive model for fiber reinforced polymer plies - coupling of plastic and elasto-damage mechanisms";
Vortrag: 6th European Conference on Computational Mechanics (Solids, Structures and Coupled Problems) (ECCM 6), Glasgow, UK; 11.06.2018 - 15.06.2018; in: "Proceedings of the 6th European Conference on Computational Mechanics (ECCM 6)", R. de Borst, J. Reese, C. Pearce (Hrg.); (2018), 12 S.

M. Springer, H. E. Pettermann:
"A Thermo-Mechanical Fatigue Damage Modeling Methodology for Power Semiconductor Robustness Validation Studies";
Vortrag: 19 th Annual International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE 2018), Toulouse, France; 15.04.2018 - 18.04.2018; in: "Proceedings of the 19 th Annual International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems", W.D. Van Driel, P. Rodgers, Ch. Bailey, B. Vandevelde, O. de Saint Leger, G.Q. Zhang (Hrg.); (2018), ISBN: 978-1-5386-2358-9; 8 S.

T. Ceglar, M. Schwab, H. E. Pettermann:
"DCB and ENF Multi-Scale Simulations";
Vortrag: 6th ECCOMAS Thematic Conference on the Mechanical Response of Composites: COMPOSITES 2017, Eindhoven; 20.09.2017 - 22.09.2017; in: "6th ECCOMAS Thematic Conference on the Mechanical Response of Composites: COMPOSITES 2017", J.J.C. Remmers, A. Turon (Hrg.); TU EIndhoven, (2017), S. 13 - 23.

M. Springer, A. Turon, H. E. Pettermann:
"A Cyclic Cohesive Zone Model for Variable Amplitude Loading and Mixed Mode Behavior";
Vortrag: 6th ECCOMAS Thematic Conference on the Mechanical Response of Composites: COMPOSITES 2017, Eindhoven; 20.09.2017 - 22.09.2017; in: "6th ECCOMAS Thematic Conference on the Mechanical Response of Composites: COMPOSITES 2017", J.J.C. Remmers, A. Turon (Hrg.); TU Eindhoven, (2017), S. 48 - 59.

H. E. Pettermann, A. De Simone:
"A Linear Thermo-Viscoelastic Orthotropic Constitutve Law - Application to Composites";
Vortrag: ECCM17 - 17th European Conference on Composite Materials, München; 26.06.2016 - 30.06.2016; in: "ECCM17 - 17th European Conference on Composite Materials", K. Drechsler (Hrg.); European Society for Composite Materials, (2016), ISBN: 978-3-00-053387-7; Paper-Nr. TUE-1_BUD_3.05-1, 8 S.

M. Schwab, H. E. Pettermann:
"Prediction of the Energy Absorption Behaviour of Large Composite Components Subjected to Impact Loads - Assessment of Individual Mechanisms at Ply Scale";
Vortrag: ECCM17 - 17th European Conference on Composite Materials, München; 26.06.2016 - 30.06.2016; in: "ECCM17 - 17th European Conference on Composite Materials", K. Drechsler (Hrg.); European Society for Composite Materials, (2016), ISBN: 978-3-00-053387-7; Paper-Nr. TUE-2_BIA_3.11-22, 7 S.

M. Springer, M. Nelhiebel, H. E. Pettermann:
"Combined Simulation of Fatigue Crack Nucleation and Propagation Based on a Damage Indicator";
Vortrag: ICMFF11, 11th International Conference on Multiaxial Fatigue and Fracture, Sevilla; 01.06.2016 - 03.06.2016; in: "Proceedings of the 11th International Conference on Multiaxial Fatigue and Fracture", ETSI, Universidad de Sevilla, Sevilla (2016), Paper-Nr. 00100-0098, 8 S.

M. Springer, M. Nelhiebel, H. E. Pettermann:
"Fatigue Crack Growth Modeling in the Metallization of Power Semiconductors under Cyclic Thermo-Mechanical Loading";
Vortrag: 17th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), Montpellier; 17.04.2016 - 20.04.2016; in: "Proceedings of the 7th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE)", IEEE, CFP16566-USB (2016), ISBN: 978-1-5090-2120-8.

M. Schwab, M. Todt, H. E. Pettermann:
"A Multiscale Modelling Approach for Simulating Impact Damage in Woven Composite Laminates";
Vortrag: 5th ECCOMAS Thematic Conference on the Mechanical Response of Composites (COMPOSITES 2015), Bristol; 07.09.2015 - 09.09.2015; in: "Proceedings of the 5th ECCOMAS Thematic Conference on the Mechanical Response of Composites", S.R. Hallett, J.J.C. Remmers (Hrg.); Bristol University, (2015), 12 S.

M. Schwab, M. Todt, H. E. Pettermann:
"Simulation of the Intermediate Velocity Impact Behavior of Woven Composite Laminate Applying Progressive Damage Models for Plies and Interfaces";
Vortrag: 20th International Conference on Composite Materials (ICCM-20), Kopenhagen; 19.07.2015 - 24.07.2015; in: "Proceedings of the 20th International Conference on Composite Materials (ICCM-20)", O.T. Thomsen, C. Berggreen, B.F. Sørensen (Hrg.); (2015), Paper-Nr. 4417-4, 11 S.

G. Kravchenko, H. E. Pettermann:
"A Cyclic Cohesive Zone Model for Transient Thermomechanical Loading";
Vortrag: 11th World Congress on Compuational Mechanics (WCCM XI), Barcelona; 20.07.2014 - 25.07.2014; in: "Proceedings of the 11th World Congress on Compuational Mechanics", E. Oñate, X. Oliver, A. Huerta (Hrg.); CIMNE, Barcelona (2014), ISBN: 978-84-942844-7-2; S. 1778 - 1789.

H. E. Pettermann, J. Broger, J. Gager:
"Nonlinear Predictions in Laminated Composites and Structures";
Vortrag: 11th World Congress on Compuational Mechanics (WCCM XI), Barcelona; 20.07.2014 - 25.07.2014; in: "Proceedings of the 11th World Congress on Compuational Mechanics", E. Oñate, X. Oliver, A. Huerta (Hrg.); CIMNE, Barcelona (2014), ISBN: 978-84-942844-7-2; S. 3727 - 3733.

M. Schwab, J. Gager, H. E. Pettermann:
"Assessing Material Nonlinearities in Large Composite Structures by Predicting Energy Dissipations at the Mesoscale";
Vortrag: 11th World Congress on Compuational Mechanics (WCCM XI), Barcelona; 20.07.2014 - 25.07.2014; in: "Proceedings of the 11th World Congress on Compuational Mechanics", E. Oñate, X. Oliver, A. Huerta (Hrg.); CIMNE, Barcelona (2014), ISBN: 978-84-942844-7-2; S. 3691 - 3702.

G. Kravchenko, B. Karunamurthy, H. E. Pettermann:
"FEM Study of Fatigue Crack Growth in a Power Semiconductor Chip Subjected to Transient Thermal Loading";
Vortrag: 20th European Conference on Fracture, Trondheim; 30.06.2014 - 04.07.2014; in: "Proceedings of the ECF20", Procedia Materials Science, 3 (2014), ISSN: 2211-8128; S. 63 - 70.

M. Schwab, M. Todt, H. E. Pettermann:
"Simulation of Ply Damage and Delamination in Laminated Composites Under Impact Loading";
Vortrag: 8th Workshop on Dynamic Behaviour of Materials and its Applications in Industrial Processes, Warschau; 25.06.2014 - 27.06.2014; in: "Dynamic Behaviour of Materials and its Applications in Industrial Processes", (2014), S. 23 - 24.

J. Gager, H. E. Pettermann:
"Numerical Predictions of the Nonlinear Behavior of Bi-Axial Braidings";
Vortrag: 16th European Conference on Composite Materials (ECCM16), Sevilla; 22.06.2014 - 26.06.2014; in: "Proceedings of the 16th European Conference on Composite Materials", University of Seville, Paper 0171 (2014), S. 1 - 10.

H. E. Pettermann, E. Rama Lista, J. Gager:
"Delamination Induced Ply Damage - Nonlinear Simulations Accounting for Degradation of Layer and Interface Properties Simultaneously";
Vortrag: Composites 2013, San Miguel, Azores; 25.09.2013 - 27.09.2013; in: "COMPOSITES 2013", A. Suleman, P.P. Camanho (Hrg.); IDMEC, Lisboa (2013), Paper-Nr. 31, 9 S.

J. Gager, M. Meindlhumer, M. Schwab, H. E. Pettermann:
"Numerically Predicted Damage and Failure Envelopes of Composites Featuring Nonlinear Material Behavior";
Vortrag: 19th International Conference on Composite Materials, Montréal; 28.07.2013 - 02.08.2013; in: "Proceedings of the 19th International Conference on Composite Materials", S.V. Hoa, P. Hubert (Hrg.); Byte Press, Toronto, ON (2013), 9 S.

G. Kravchenko, B. Karunamurthy, M. Nelhiebel, H. E. Pettermann:
"Finite Element Analysis of Fatigue cracks Formation in Power Metallization of a Semiconductor Device Subjected to Active Cycling";
Vortrag: 14th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, Wroclaw; 15.04.2013 - 17.04.2013; in: "Proceedings of the 14th Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems", IEEE, Piscataway, NJ, (2013), ISBN: 978-1-4673-6137-8; Paper-Nr. 91, 6 S.

H. E. Pettermann, J. Gager, A. Kholkin, M. Fleischmann, M. Wolfahrt, G. Pinter:
"Simulations and Experiments of Three Point Bending Laminates with Ply Failure and Delamination";
Vortrag: DFC12/SI6 Designing Composite Materials: Avoiding Large Structural Failures, Cambridge; 08.04.2013 - 11.04.2013; in: "Deformation and Fracture of Composites (DFC-12) & Structural Integrity and Multi-scale Modelling (SI-6)", University of Sheffield, (2013), Paper-Nr. S13T2, 2 S.

J. Gager, H. E. Pettermann:
"Multi-Layered Textile Composites - A Shell Element Based Homogenization Approach";
Vortrag: ECCOMAS 2012 (European Congress on Computational Methods in Applied Sciences and Engineering, Wien (eingeladen); 10.09.2012 - 14.09.2012; in: "CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)", J. Eberhardsteiner, H. J. Böhm, F. G. Rammerstorfer (Hrg.); TU Wien, Wien (2012), ISBN: 978-3-9502481-9-7; Paper-Nr. 4753, 12 S.

H. E. Pettermann, J. Gager, E. Rama Lista, T. Flatscher:
"Elasto-Plasto-Damage Modeling of Laminated Composites";
Vortrag: ECCOMAS 2012 (European Congress on Computational Methods in Applied Sciences and Engineering, Wien (eingeladen); 10.09.2012 - 14.09.2012; in: "CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)", J. Eberhardsteiner, H. J. Böhm, F. G. Rammerstorfer (Hrg.); TU Wien, Wien (2012), ISBN: 978-3-9502481-9-7; Paper-Nr. 3717, 7 S.

J. Gager, H. E. Pettermann:
"Assessing the Operation Load Range of Non-Linear Textile Composites by Means of Stress Envelopes";
Vortrag: 15th European Conference on Composite Materials (ECCM 15), Venedig; 24.06.2012 - 28.06.2012; in: "Proceedings of the 15th European Conference on Composite Materials", ECCM15, (2012), ISBN: 978-88-88785-33-2; Paper-Nr. 1837, 8 S.

M. Wolfahrt, J. Cichosz, J. Gager, R.T. Hinterhölzl, H. E. Pettermann, S. Frieß, G. Pinter, J. Noisternig:
"Werkstoffcharakterisierung, Materialmodellierung und Simulation von CFK-Geflechtlaminaten";
Vortrag: 20. Leobner Kunststoffkolloquium Polymerer Leichtbau, Leoben; 10.11.2011 - 11.11.2011; in: "20. Leobner Kunststoff-Kolloquium", Montanuniversität Leoben, (2011), S. 101 - 110.

J. Gager, T. Flatscher, H. E. Pettermann:
"Elasto-Plasto-Damage Modeling of FRP Fabrics - A Shell Unit Cell Approach";
Vortrag: 3rd ECCOMAS Thematic Conference on the Mechanical Response of Composites, Hannover; 21.09.2011 - 23.09.2011; in: "Proceedings of the 3rd ECCOMAS Thematic Conference on the Mechanical Response of Composites", R. Rolfes, E. Jansen (Hrg.); Leibniz Univerisität Hannover, Hannover (2011), ISBN: 978-3-00-035855-5; S. 279 - 286.

T. Flatscher, H. E. Pettermann:
"A Constitutive Model for Unidirectional Plies: Implementation and Application in Finite Element Analysis";
Vortrag: 10th International Conference on Computational Structures Theory (CST 2010), Valencia; 14.09.2010 - 17.09.2010; in: "The Tenth International Conference on Computational Structures Technology", B.H.V. Topping, J.M. Adam, F.J. Pallarés, R. Bru, M.L. Romero (Hrg.); (2010), ISBN: 978-1-905088-37-9; Paper-Nr. 70, 10 S.

J. Gager, B. Karunamurthy, M. Nelhiebel, H. E. Pettermann:
"Finite Element Based Simulations of Interface Cracks in Semiconductor Devices - A Study on Geometry Parameters and Delamination Configurations";
Vortrag: 18th European Conference on Fracture, Dresden; 30.08.2010 - 03.09.2010; in: "Fracture of Materials and Structures form Micro to Macro Scales", ESIS, (2010), Paper-Nr. 233, 8 S.

H. E. Pettermann, C.O. Huber, M.H. Luxner, S. Nogales, H. J. Böhm:
"An Incremental Mori-Tanaka Approach for Finite Strain Elastoplasticity of Particulate MMCs";
Vortrag: Plasticity '10: The Sixteenth International Symposium on Plasticity and its Current Applications, St. Kitts; 03.01.2010 - 08.01.2010; in: "Proceedings of Plasticity '10", A.S. Khan, B. Farrokh (Hrg.); NEAT Press, Fulton, MD, (2010), ISBN: 0-9659463-2-0; S. 133 - 135.

G. Wimmer, M. Roldán Galán, H. E. Pettermann:
"A Semi-Analytical Approach for the Simulation of Delamination Growth under Quasi-Static and Cyclic Loading";
Vortrag: ECCM 13 - 13th European Conference on Composite Materials, Stockholm; 02.06.2008 - 05.06.2008; in: "Proc. ECCM 13", (2008), Paper-Nr. 528, 10 S.

C. Schuecker, H. E. Pettermann:
"Combining Progressive Damage with Plasticity to Model the Non-linear Behavior of Fiber Reinforced Laminates";
Vortrag: ECCOMAS Composites 2007, Porto; 12.09.2007 - 14.09.2007; in: "ECCOMAS Thematic Conference Mechanical Response of Composites", P.P. Camanho, C.G. Dávila, S.T. Pinho, J.J.C. Remmers (Hrg.); ECCOMAS, Universidade do Porto (2007), Paper-Nr. 41, 14 S.

G. Wimmer, H. E. Pettermann:
"Simulation of Delamination in Laminate Composite Components - A Fracture Mechanics Based Method";
Vortrag: ECCOMAS Composites 2007, Porto; 12.09.2007 - 14.09.2007; in: "ECCOMAS Thematic Conference Mechanical Response of Composites", P.P. Camanho, C.G. Dávila, S.T. Pinho, J.J.C. Remmers (Hrg.); ECCOMAS, Universidade do Porto (2007), Paper-Nr. 32, 13 S.

C.O. Huber, M.H. Luxner, S. Kremmer, S. Nogales, H. J. Böhm, H. E. Pettermann:
"Forming Simulations of MMC Components by a Micromechanics Based Hierarchical FEM Approach";
Vortrag: NUMIFORM 07, Porto; 17.06.2007 - 21.06.2007; in: "Numiform 07 - Materials Processing and Design: Modeling, Simulation and Applications", J.M.A.C. de Sá, A.D. Santos (Hrg.); American Institute of Physics, (2007), ISBN: 978-0-7354-0416-8; Paper-Nr. 1351, 6 S.

J. Stampfl, M. Schuster, R. Inführ, R. Liska, M.H. Luxner, H. E. Pettermann, F. Varga, C. Turecek:
"Rapid Prototyping als Fertigungswerkzeug zur Herstellung zellularer Strukturen";
Vortrag: 52. Metallkunde Kolloquium, Lech am Arlberg; 19.04.2006 - 21.04.2006; in: "52. Metallkunde-Kolloquium: Werkstoffforschung für Wirtschaft und Gesellschaft", (2006), S. #.

C.O. Huber, S. Kremmer, H. E. Pettermann:
"Finite Element Simulation of Metal Matrix Composites - Effective Coefficients of Friction and Temperature Fields under Frictional Loading";
Vortrag: World Tribology Congress III, Washington, DC; 12.09.2005 - 16.09.2005; in: "Proceedings WTC2005 World Tribology Congress III", R.S. Cowan, J. Tichy, S. Gunsel, J. Knight (Hrg.); ASME, New York, NY (2005), ISBN: 0-7918-3767-x; Paper-Nr. WTC2005-63272;, 2 S.

J. Stampfl, M.H. Luxner, H. E. Pettermann, A. Woesz, P. Fratzl:
"Rapid Prototyping and Modelling of cellular solids";
Vortrag: Euromat 2005, Prag; 05.09.2005 - 08.09.2005; in: "Euromat 2005 European Congress on Advanced Materials and Processes", DGM, http://www.dgm.de/past/2005/euromat2005/programme/ (2005), Paper-Nr. C12-614, 1 S.

C. Schuecker, H. E. Pettermann:
"A Mechanism Based Damage Meso-Model for Fiber Reinforced Laminates";
Vortrag: Fifteenth Internacional Conference on Composite Materials (ICCM-15), Durban; 27.06.2005 - 01.07.2005; in: "Fifteenth International Conference on Composite Materials - Extended Abstracts", V.E. Verijenko, S. Adali, E. Morosov, C.J. von Klemperer (Hrg.); (2005), S. 245 - 246.

D. Duschlbauer, H. J. Böhm, H. E. Pettermann:
"Short Fiber Metal Matrix Composites under Temperature Load - Local Stresses and Global Deformations";
Vortrag: Sixth International Congress on Thermal Stresses, Wien; 26.05.2005 - 29.05.2005; in: "Thermal Strress 2005: Proceedings of the Sixth International Congress on Thermal Stresses", F. Ziegler, R. Heuer, C. Adam (Hrg.); (2005), ISBN: 3-901167-12-9; S. 759 - 762.

M.H. Luxner, J. Stampfl, H. E. Pettermann:
"Linear and Nonlinear Numerical Investigations of Regular Open Cell Structures";
Vortrag: 2004 ASME International Mechanical Engineering Congress and RD&D Expo, Anaheim, CA; 13.11.2004 - 20.11.2004; in: "Proceedings of the 2004 ASME International Mechanical Engineering Conference", ASME, New York, (2004), ISBN: 0-7918-4180-4; Paper-Nr. IMECE2004-62545.

D. Duschlbauer, H. J. Böhm, H. E. Pettermann:
"Composites with planar random fiber arrangements";
Vortrag: XXI International Congress of Theoretical and Applied Mechanics, Warschau; 15.08.2004 - 21.08.2004; in: "Proceedings of the XXI International Congress of Theorectical and Applied Mechanics", W. Gutkowski, T.A. Kowalewski (Hrg.); IPPT PAN, Warschau (2004), ISBN: 83-89687-01-1; Paper-Nr. SM13_12321, 2 S.

D. H. Pahr, C. Schuecker, F. G. Rammerstorfer, H. E. Pettermann:
"Investigations of Perforated Laminates in the Presence of Residual Stress";
Vortrag: 11th European Conference on Composite Materials, Rhodos; 31.05.2004 - 03.06.2004; in: "ECCM11 Book of Abstracts", C. Galiotis (Hrg.); Vol.1 (2004), S. 352 - 353.

A. F. Plankensteiner, D. Duschlbauer, O. Coube, H. E. Pettermann, H. J. Böhm:
"Numerical and Experimental Analysis of Pore Shape Evolution of Sintered Molybdenum under Triaxial Loading Condition";
Vortrag: Pm Tec 2003, Las Vegas, NV; 08.07.2003 - 12.07.2003; in: "Advances in Powder Metallurgy and Particulate Metals - 2003", MPIF, Princeton, NJ, (2003), ISBN: 1-878954-96-2; S. 108 - 119.


Vorträge und Posterpräsentationen (ohne Tagungsband-Eintrag)


M. Schasching, R. Duy, T. Ceglar, M. Todt, H. E. Pettermann:
"Simulation of The Wrinkling of Thin Hyperelastic Composite Strips under Global Tensile Loading";
Vortrag: 8th ECCOMAS Thematic Conference on the Mechanical Response of Composites, Göteborg; 22.09.2021 - 24.09.2021.

M. Todt, R.W. Tomas, T. Koch, H. E. Pettermann:
"Numerical Study of yhe Creep Buckling Response of Laminated Orthotropic Linear Viscoelastic Cylindrical Shells";
Vortrag: 8th ECCOMAS Thematic Conference on the Mechanical Response of Composites, Göteborg; 22.09.2021 - 24.09.2021.

M. Todt, R.W. Tomas, T. Koch, H. E. Pettermann:
"Simulation of the Mechanical Response of Composite Components Under Consideration of Their Orthotropic Viscoelastic Material Behavior";
Vortrag: 14th World Congress on Computational Mechanics (WCCM 2020, Paris), Paris; 11.01.2021 - 15.01.2021.

H. E. Pettermann:
"Modeling and Simulation of Composite Materials and Components";
Vortrag: SSD Seminar Series WS 2019/2020, School for Simulation and Data Science, RWTH Aachen, Aachen (eingeladen); 13.02.2020.

J. Kaul, H. E. Pettermann:
"Modellierung und Simulation von Plastizität und Schädigung in Faserverbundlaminaten";
Poster: CU-Forum "CARBON COMPOSITES AUSTRIA" 2019, Spielberg; 12.11.2019.

M. Todt, R.W. Tomas, T. Koch, H. E. Pettermann:
"Numerische Vorhersage der linear viskoelastischen Materialeigenschaften von Faserverbundlaminaten";
Vortrag: CU-Forum "CARBON COMPOSITES AUSTRIA" 2019, Spielberg; 12.11.2019.

H. E. Pettermann:
"Non-linear modeling and simulation of the performance of composite structures --- impact on fabric ply laminates";
Vortrag: CCeV-Thementag "Ermüdung und strukturelle Integrität von Composties", St. Valentin (eingeladen); 04.04.2019.

T. Ceglar, H. E. Pettermann:
"Finite element simulations and nonlinear homogenization of fibre reinforced elastomer composite";
Vortrag: 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019), Vienna; 18.02.2019 - 22.02.2019.

P. Hoffmann, M. Springer, M. Todt, B. Karunamurthy, M. Nelhiebel, H. E. Pettermann:
"Simulation of fatigue damage in power semiconductors subjected to transient thermo-mechanical loading";
Vortrag: 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019), Vienna; 18.02.2019 - 22.02.2019.

J. Kaul, H. E. Pettermann:
"A constitutive model for fiber reinforced polymer plies - transition from hardening to softening behavior during anisotropic damage evolution";
Vortrag: 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019), Vienna; 18.02.2019 - 22.02.2019.

R.W. Tomas, M. Todt, T. Koch, H. E. Pettermann:
"Numerical prediction of the homogenized orthotropic linear viscoelastic material properties of composite plies and laminated composites";
Vortrag: 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019), Vienna; 18.02.2019 - 22.02.2019.

B. Werner, M. Todt, H. E. Pettermann:
"Nonlinear finite element study of beams with elasto-plastic damage behavior in the post-buckling regime";
Vortrag: 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019), Vienna; 18.02.2019 - 22.02.2019.

M. Schwab, M. Todt, J Tauchner, H. E. Pettermann:
"FEM simulations of high velocity impact discerning various ply and interface damage mechanisms";
Vortrag: International Conference on Composite Structures ICCS21, Bologna, Italy; 04.09.2018 - 07.09.2018.

T. Ceglar, H. E. Pettermann:
"Finite Element Simulations and Nonlinear Homogenization of Hyperelastic Fibre Reinforced Elastomer Composites";
Vortrag: 10th European Solid Mechanics Conference, Bologna, Bologna; 02.07.2018 - 06.07.2018.

T. Ceglar, M. Schwab, A. Wagner, H. E. Pettermann:
"Nonlinear Multi-Scale Simulations of Fabric Laminate Components";
Vortrag: ECCOMAS Thematic Conference on Computational Modeling of Complex Materials Across the Scales, Paris; 07.11.2017 - 09.11.2017.

M.M. Schasching, M. Todt, M. Humer, P. Hoffmann, M. Schwab, H. E. Pettermann:
"Simulating Ply Damage and Delamination in Laminated Composites - An Extended Shell-Based Ply-Level Approach";
Vortrag: 20th International Conference on Composite Structures (ICCS20), Paris; 04.09.2017 - 07.09.2017.

J. Kaul, B. Dohnál, H. E. Pettermann:
"A Constitutive Law for Modeling Elasto-Plasto-Damage Mechanisms in UD-Plies: Damage Evolution under Multiaxial Strain States";
Vortrag: CFRAC 2017 - Fifth International Conference on Computational Modeling of Fracture and Failure of Materials and Structures, Nantes; 14.06.2017 - 16.06.2017.

H. E. Pettermann:
"Modellierung und Simulation von Schädigung und Versagen von Faserverbund-Bauteilen";
Vortrag: PCCL Symposium Juni 2017, Leoben (eingeladen); 01.06.2017 - 02.06.2017.

M. Todt, M. Schwab, M. Humer, F. G. Rammerstorfer, H. E. Pettermann:
"Accounting for Transverse Shear in Shell-Based Ply-Level Models of Layered Composites";
Vortrag: 88th Annual Meeting of GAMM, Ilmenau/Weimar, Germany; 06.03.2017 - 10.03.2017.

M. Todt, M. Schwab, M. Humer, F. G. Rammerstorfer, H. E. Pettermann:
"Shell-Based Ply-Level Models of Layered Composites";
Poster: 88th Annual Meeting of GAMM, Ilmenau/Weimar, Germany; 06.03.2017 - 10.03.2017.

M. Springer, H. E. Pettermann:
"Fatigue Damage Modeling of Power Semiconductor Devices";
Vortrag: Vortragsreihe der Arbeitsgruppe AMADE, Universitat de Girona, Girona (eingeladen); 22.09.2016.

M. Schwab, H. E. Pettermann:
"Modelling Laminated Fabric Composites under Impact Loads";
Vortrag: 24th International Congress of Theoretical and Applied Mechanics, Monreal, PQ; 21.08.2016 - 26.08.2016.

M. Schwab, A. Grabos, H. E. Pettermann:
"Nonlinear FEM Simulations of a Laminated Textile Composite Component - A Multi Scale Embedding Approach";
Vortrag: mechcomp 2016 - 2nd International Conference on Mechanics of Compositesmechcomp 2016, Porto; 11.07.2016 - 14.07.2016.

M. Springer, H. E. Pettermann, M. Nelhiebel, B. Karunamurthy:
"FEM - Fatigue Modeling Approach for Damage Propagation and Lifetime Estimation";
Poster: Campeon Innovation Week 2015, München; 09.11.2015 - 13.11.2015.

H. E. Pettermann:
"Linear Thermo-Viscoelastic Orthotropic Plane Stress Constitutive Law in the Time Domain";
Vortrag: SISSA MathLab Seminar, Triest; 24.09.2015.

M. Todt, M. Schwab, H. E. Pettermann:
"Accounting for Transverse Shear in Stacked-Shell Models of Layered Composite Structures";
Vortrag: 9th European Solid Mecahnics Conference (ESMC 2015), Madrid; 06.07.2015 - 10.07.2015.

M. Springer, M. Schwab, H. E. Pettermann:
"Simulation of Ply Damage and Delamination in Multilayer Composites to Predict the Residual Compressive Strength after Impact Loading";
Vortrag: IV International Conference on Computational Modeling of Fracture and Failure of Materials and Structure (CFRAC 2015), Cachan; 03.06.2015 - 05.06.2015.

M. Springer, H. E. Pettermann, M. Nelhiebel, B. Karunamurthy:
"Damage Mechanics for Reliability: FEM-Predictions of Material Degradation in Cu Power Metallization";
Poster: Infineon Innovation Days 2015, Villach; 05.05.2015.

G. Wimmer, H. E. Pettermann, P. Oberhuber:
"A Numerically Efficient Approach for Cooling Stack Design using Orthotropic Shell Elements with Homogenized Effective Properties";
Vortrag: SIMULIA Austria Regional User's Meeting 2014, Graz; 10.11.2014 - 11.11.2014.

H. E. Pettermann, J. Gager, M. Meindlhumer, M. Schwab:
"Damage Evolution Predictions in Large Laminated Composite Structures";
Hauptvortrag: CFRAC 2013 - Third International Conference on Modeling of Fracture and Failure of Materials and Structures, Prag (eingeladen); 05.06.2013 - 07.06.2013.

H. E. Pettermann, J. Gager, T. Flatscher, E. Rama Lista:
"The Mechanical Performance of Laminated Structures - A Simulation Concept Integrating Ply and Interface Non-Linearities";
Vortrag: Faser-Verbund-Werkstoff - Simulationstag beim CCeV, Augsburg; 25.10.2012.

G. Kravchenko, H. E. Pettermann:
"Submodelling-based analysis of thermally induced stresses in power metallization of a MOSFET device subjected to active cycling";
Vortrag: 1st Infineon Simulation Symposium - Advances in Thermomechanical and Thermoelectrical Simulation, Neubiberg; 24.10.2012.

J. Gager, J. Cichosz, M. Wolfahrt, R.T. Hinterhölzl, H. E. Pettermann, M. Fleischmann, M. Schubert:
"Materialmodellierung von kohlenstofffaserverstärkten Geflechtlaminaten";
Vortrag: PCCL Symposium Oktober 2012 "10 Jahre PCCL", Leoben; 04.10.2012 - 05.10.2012.

J. Gager, H. E. Pettermann:
"Shell Element Based Homogenization of Textile Composites";
Vortrag: 8th European Solid Mechanics Conference (ESMC 2012), Graz; 09.07.2012 - 13.07.2012.

G. Kravchenko, H. E. Pettermann, B. Karunamurthy, M. Nelhiebel, S. Wöhlert:
"Numerical Simulation of Crack Problems in Semiconductor Devices";
Poster: Infineon Innovation Day 2012, Villach; 05.07.2012.

G. Wimmer, H. E. Pettermann:
"Computational Methods for the Prediction of Emergence and Growth of Delaminations in Laminated Composite Components";
Vortrag: IUTAM 2012 Symposium on Fracture Phenomena in Nature and Technology, Brescia; 01.07.2012 - 05.07.2012.

J. Gager, H. E. Pettermann:
"The Mechanical Performance of Laminated Structures - A Simulation Concept Integrating Ply and Interface";
Vortrag: FACC Technical Colloquium "Advances in Composites", Salzburg; 05.06.2012 - 06.06.2012.

J. Gager, J. Cichosz, M. Wolfahrt, H. E. Pettermann, R.T. Hinterhölzl, G. Pinter, J. Noisternig:
"Werkstoffcharakterisierung, Materialmodellierung und Simulation am Beispiel von kohlenstofffaserverstärkten Geflechtlaminaten";
Vortrag: PCCL Symposium Mai 2012, Leoben; 19.05.2012 - 20.05.2012.

J. Gager, H. E. Pettermann:
"FEM Homogenization of Textile Composites Based on Shell Element Discretization";
Vortrag: ICCS16, 16th International Conference on Composite Structures, Porto; 28.06.2011 - 30.06.2011.

T. Flatscher, H. E. Pettermann:
"A Constitutive Ply Model for Non-Linear Implicit FEM Analyses of Laminated Composite Structures";
Vortrag: Sixth M.I.T. Conference on Computational Fluid and Solid Mechanics, Cambridge, MA; 15.06.2011 - 17.06.2011.

T. Flatscher, J. Gager, H. E. Pettermann:
"Constitutive Ply Modeling of Plasticity, Brittle Damage, and Softening Applied to Failure Analyses of Laminated Composite Structures";
Hauptvortrag: CFRAC 2011 - International Conference on Computational Modeling of Fracture and Failure of Materials and Structures, Barcelona; 06.06.2011 - 08.06.2011.

H. E. Pettermann:
"Elasto-Plastic-Damage Modeling of Laminated Composites";
Vortrag: Seminar of the Structural Mechanics and Concepts Branch, NASA Langley Research Center, Hampton, VA (eingeladen); 16.05.2011.

H. E. Pettermann, M.H. Luxner, J. Hüsing, C. Gaßner:
"Modeling and Simulation of Relaxation and Damping in Viscoplastic Open Cell Materials and Structures";
Vortrag: IUTAM Symposium: Mechanics of Liquid and Solid Foams, Austin, TX (eingeladen); 08.05.2011 - 13.05.2011.

T. Flatscher, M. Wolfahrt, G. Pinter, H. E. Pettermann:
"Simulations and Experiments of Laminated Open Hole Tension Tests - Assessment of Intraply Plasticity, Damage, and Localization";
Vortrag: Dfc-11 & Si-5, Cambridge, UK; 12.04.2011 - 15.04.2011.

H. E. Pettermann:
"Verbundwerkstoffe: Von der Materialmodellierung zur Bauteilberechnung";
Vortrag: innovmat, Wien; 05.04.2011.

J. Gager, H. E. Pettermann:
"Numerical Simulation of Damage Triggered Delamination in Composite Structures";
Poster: Aerodays 2011, Madrid; 30.03.2011 - 01.04.2011.

H. E. Pettermann, C.O. Huber, M.H. Luxner, S. Nogales, H. J. Böhm:
"Multiskalenmodellierung von MMC-Komponenten unter großen Verzerrungen";
Vortrag: Werkstoffkongress 2010, Leoben (eingeladen); 04.11.2010 - 05.11.2010.

H. E. Pettermann, M.H. Luxner, J. Stampfl:
"Architecture-Property Correlation of Open Cell Materials by Nonlinear FEM Simulations";
Vortrag: EUROMAT 2009, Glasgow (eingeladen); 07.09.2009 - 10.09.2009.

H. E. Pettermann, C.O. Huber, M.H. Luxner, S. Nogales, H. J. Böhm:
"MMC Parts under Finite Elastoplasticity - Mean Field and Unit Cell Simulations";
Vortrag: 3. GAMM-Seminar on Multiscale Material Modelling, Karlsruhe; 26.06.2009 - 27.06.2009.

S. Nogales, D. Duschlbauer, H. E. Pettermann, H. J. Böhm:
"Analytical and Numerical Modelling of Composites Containing Reinforcements with Finite Interfacial Conductances";
Vortrag: 5th International Conference on Diffusion in Solids and Liquids (DSL 2009), Rom (eingeladen); 24.06.2009 - 26.06.2009.

T. Flatscher, H. E. Pettermann:
"Plasticity, Damage, and Failure Predictions in Laminated Composites";
Vortrag: 15th International Conference on Composite Structures (ICCCS15), Porto; 15.06.2009 - 17.06.2009.

G. Wimmer, H. E. Pettermann:
"Numerical Simulation of Progressive Growth of Delaminations with Curved Fronts";
Vortrag: Composites 2009, London; 01.04.2009 - 03.04.2009.

T. Flatscher, C. Schuecker, H. E. Pettermann:
"A Constitutive Model for Continuous Fiber Reinforced Polymer Plies";
Vortrag: 80th Annual Meeting of the GAMM, Gdansk; 09.02.2009 - 13.02.2009.

H. E. Pettermann:
"Modellierung und Simulation von Verbundwerkstoffen und Bauteilen";
Vortrag: Zukunft der Faserverbundwerkstoffe in der österreichischen Luftfahrtindustrie und -forschung, Wien; 01.12.2008.

H. E. Pettermann, D. García Vallejo, J. Stampfl, M.H. Luxner, J. Domínguez:
"Viskoelastische Eigenschaften von zellulären Strukturen";
Vortrag: 3. Wiener Biomaterialsymposium, Wien; 19.11.2008 - 21.11.2008.

H. E. Pettermann, D. García Vallejo, J. Stampfl, M.H. Luxner, J. Domínguez:
"Viscoelastic Properties of Open Cell Kelvin Foams";
Vortrag: Ictam 2008, Adelaide; 24.08.2008 - 29.08.2008.

T. Flatscher, C. Schuecker, H. E. Pettermann:
"An Elasto-Plasto-Damage Constitutive Ply Model for FEM-Analyses of Laminated Composite Structures";
Vortrag: 8th World Congress on Computational Mechanics (WCCM8) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), Lido di Venezia; 30.06.2008 - 04.07.2008.

H. E. Pettermann, S. Nogales, C.O. Huber, M.H. Luxner, H. J. Böhm:
"Micromechanics Based Structural Analysis of MMC Components under Finite Strains";
Vortrag: 8th World Congress on Computational Mechanics (WCCM8) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), Lido di Venezia; 30.06.2008 - 04.07.2008.

H. E. Pettermann:
"Modeling and Simulation of Open Cell Structures";
Vortrag: Seminar des Max-Planck-Institute for Colloid and Interface Research, Potsdam (eingeladen); 06.06.2008.

H. E. Pettermann:
"Theorie und Anwendung von nichtlinearen Konstitutivgesetzen für Verbundwerkstoffe im Rahmen von FEM-Strukturanalyse";
Vortrag: NAFEMS Seminar "Simulation von Verbunden: Material und Strukturen", Bad Kissingen; 06.11.2007 - 07.11.2007.

M.H. Luxner, H. E. Pettermann:
"Modeling and Simulation of Highly Porous Open Cell Structures - Elasto-Plasticity and Localization versus Disorder and Defects";
Vortrag: IUTAM Symposium on Mechanical Properties of Cellular Materials, Paris; 17.09.2007 - 21.09.2007.

H. E. Pettermann:
"Numerical Simulation of Damage Processes in Composite Aircraft Components";
Vortrag: 4th FACC Technical Colloquium, Salzburg (eingeladen); 21.06.2007.

M.H. Luxner, J. Stampfl, H. E. Pettermann:
"Disordered Open Cell Structures: Elasto-Plastic Behavior and Defect Sensitivity";
Vortrag: McMAT 2007 - ASME Applied Mechanics and Materials Conference, Austin, TX; 03.06.2007 - 07.06.2007.

G. Wimmer, C. Schuecker, H. E. Pettermann:
"Delamination Growth in a Laminated Composite Component, A Fracture Mechanics Based Method";
Vortrag: Deformation and Fracture of Composites Conference (DFC9), Sheffield, UK (eingeladen); 11.04.2007 - 13.04.2007.

H. E. Pettermann:
"Modeling and Simulation of Open Cell Biomimetic Structures";
Vortrag: DIMM Seminar, ETS, Universidad de Sevilla; 27.03.2007.

H. J. Böhm, S. Nogales, H. E. Pettermann:
"Comparisons of Mori-Tanaka and Unit Cell Predictions for the Thermoelastic and Thermal Conduction Behavior of Discontinuously Reinforced Composites";
Vortrag: 19th International Workshop "Research in Mechanics of Composites", Bad Herrenalb; 26.11.2006 - 29.11.2006.

H. E. Pettermann, M.H. Luxner, A. Woesz, P. Fratzl, J. Stampfl:
"Modellierung und Simulation offenzelliger biomimetischer Strukturen - Elasto-Plastizität und Kollaps versus Unordnung und Defekte";
Vortrag: 2. Wiener Biomaterialsymposium, Wien; 22.11.2006 - 24.11.2006.

G. Wimmer, C. Schuecker, H. E. Pettermann:
"Numerical Simulation of Onset and Growth of Delamination in Laminated Composites";
Vortrag: Conference on Damage in Composite Materials 2006 (CDCM2006), Stuttgart; 18.09.2006 - 19.09.2006.

H. E. Pettermann, C.O. Huber, M.H. Luxner, S. Nogales, H. J. Böhm:
"Finite Elastic-Plastic Deformations of MMC Components - Multiscale Mean Field and Unit Cell Simulations";
Vortrag: 35th Solid Mechanics Conference, Krakau; 04.09.2006 - 08.09.2006.

C.O. Huber, S. Kremmer, A. Merstallinger, H. E. Pettermann:
"Numerical Simulation of Composites - Thermoelastic Friction Analysis and Its Limitation Due to Thermoelastic Instability";
Vortrag: 6th European Solid Mechanics Conference, Budapest; 28.08.2006 - 01.09.2006.

H. J. Böhm, S. Nogales, D. Duschlbauer, H. E. Pettermann:
"Numerically Based Modeling of Thermal Conduction in Discontinuosly Reinforced Composites";
Vortrag: 7th World Congress on Computational Mechanics (WCCM-7), Los Angeles, CA; 16.07.2006 - 22.07.2006.

G. Wimmer, C. Schuecker, H. E. Pettermann:
"Numerical Simulation of the Damage Process of Fiber Reinforced Aircraft Components";
Poster: Aeronautics Days 2006, Wien; 19.06.2006 - 21.06.2006.

M.H. Luxner, J. Stampfl, A. Woesz, P. Fratzl, H. E. Pettermann:
"Influence of Defects and Perturbations on the Performance of 3D Open Cell Structures";
Vortrag: 3rd European Conference on Computational Mechanics (ECCM 2006), Lissabon; 05.06.2006 - 09.06.2006.

C. Schuecker, H. E. Pettermann:
"Constitutive Ply Damage Modeling, FEM Implementation, and Analysis of Laminated Structures";
Vortrag: 3rd European Conference on Computational Mechanics (ECCM 2006), Lissabon; 05.06.2006 - 09.06.2006.

H. E. Pettermann:
"Continuum Micromechanics of Heterogeneous Materials";
Vortrag: 3rd Arctic-Mediterranean Post Graduate Workshop on Intelligent Machines and Transport Systems, Sevilla; 13.11.2005 - 20.11.2005.

H. E. Pettermann:
"Continuum Mechanics Modelling of Composite Materials";
Vortrag: Seminar der Kroatischen Gesellschaft für Mechanik, Zagreb (eingeladen); 20.10.2005.

M.H. Luxner, J. Stampfl, H. E. Pettermann:
"Nichtlineare Simulation dreidimensionaler offenzelliger Strukturen mit regelmäßigen und gestörten Geometrien";
Vortrag: Workshop Simulation von Schaumstoffen mit stark nichtlinearem Verhalten, Hohenwart, Deutschland; 15.09.2005 - 16.09.2005.

H. J. Böhm, T. Drabek, D. Duschlbauer, A. Eckschlager, W. Han, C.O. Huber, H. E. Pettermann:
"Unit Cell and Mean Field Models of Continuously Reinforced Composites";
Hauptvortrag: Micromechanics and Microstructure Evolution: Modeling Simulation and Experiments, Madrid (eingeladen); 12.09.2005 - 16.09.2005.

M.H. Luxner, J. Stampfl, H. E. Pettermann:
"Nonlinear Behavior of Regular and Irregular Open Cell Structures";
Vortrag: Euromech Colloquium 466 "Computational and Experimental Mechanics of Advanced Materials", Loughborough; 20.07.2005 - 22.07.2005.

M.H. Luxner, J. Stampfl, H. E. Pettermann:
"Nonlinear Behavior of 3D Regular and Irregular Open Cell Structures";
Vortrag: Third M.I.T. Conference on Computational Fluid and Solid Mechanics, Cambridge, MA (eingeladen); 14.06.2005 - 17.06.2005.

H. E. Pettermann:
"Modeling and Simulation of Failure and Progressive Damage in Laminated Composites";
Vortrag: MATELCOMP Minisymposium and Final Workshop, Leoben (eingeladen); 18.04.2005 - 19.04.2005.

C. Schuecker, H. E. Pettermann:
"Failure Prediction of Layered Fiber Reinforced Composites in the Presence of Residual Stresses";
Poster: Einsteins in the City, New York, NY; 11.04.2005 - 12.04.2005.

H. E. Pettermann, C. Schuecker, D. H. Pahr, F. G. Rammerstorfer:
"Modeling and Simulation of Aircraft Structures - Stiffness, Damage, and Failure Prediction for Laminated Composites";
Vortrag: 4th FENet Annual Industry Meeting, Lissabon; 02.12.2004 - 03.12.2004.

M.H. Luxner, H. E. Pettermann:
"Linear and Nonlinear Simulations of Highly Porous Materials";
Vortrag: Euromech Colloquium 459 "Mechanical Behavior of Cellular Solids", Nancy (eingeladen); 07.06.2004 - 10.06.2004.

C. Schuecker, D. H. Pahr, H. E. Pettermann:
"Numerical Simulation of Composite Structures - First Ply Failure under Non-Proportional Loading";
Vortrag: 6th International Conference for Mesomechanics, Patras; 31.05.2004 - 04.06.2004.

D. Duschlbauer, H. E. Pettermann:
"Numerical Simulation of Composite Materials by Multi-Fiber Unit Cells";
Vortrag: 21st CAD-FEM User's Meeting, Potsdam; 12.11.2003 - 14.11.2003.

H. E. Pettermann:
"Modeling of Cellular Solids";
Vortrag: Kolloquium des Max-Planck-Instituts für Kolloid- und Grenzflächenforschung, Potsdam (eingeladen); 11.11.2003.

H. E. Pettermann:
"Kontinuumsmechanische Modellierung von Verbundwerkstoffen";
Vortrag: Habilitationsvortrag, Wien; 17.10.2003.

H. E. Pettermann, C. Schuecker, D. H. Pahr:
"Simulation und Modellierung mechanischer Eigenschaften von Laminaten";
Vortrag: Wissenschaftliches Evaluierungsseminar des Austrian Aeronautics Research Network, Wien; 13.10.2003.

H. J. Böhm, J. Segurado, D. Duschlbauer, H. E. Pettermann, A. F. Plankensteiner:
"Modeling of the Densification of Porous Molybdenum by a Unit Cell Approach";
Vortrag: 5th Euromech Solid Mechanics Conference ESMC-5, Thessaloniki; 17.08.2003 - 22.08.2003.

C. Schuecker, D. H. Pahr, H. E. Pettermann:
"Numerical Simulation of Failure in Layered Fiber Reinforced Composites in the Presence of Residual Stresses";
Vortrag: 5th Euromech Solid Mechanics Conference ESMC-5, Thessaloniki; 17.08.2003 - 22.08.2003.

D. Duschlbauer, H. E. Pettermann, H. J. Böhm:
"Rechnerische Simulation der Wärmeleitungseigenschaften von MMCs mit spezieller Berücksichtigung eines thermischen Widerstandes am Interface";
Vortrag: 14. DGM Symposium Verbundwerkstoffe und Werkstoffverbunde, Wien; 02.07.2003 - 04.07.2003.

D. Duschlbauer, H. E. Pettermann, H. J. Böhm:
"Heat Conduction of Spheroidal Inhomogeneities with Imperfect Interfaces";
Vortrag: 2003 ASME Mechanics and Materials Conference, Scottsdale, AZ; 17.06.2003 - 20.06.2003.

H. E. Pettermann, S. Suresh:
"Finite Element Unit Cell Predictions of the Entire Overall Elastic, Piezoelectric and Dielectric Behavior of 1-3 Composites";
Vortrag: 7th European Mechanics of Materials Conference (EMMC7), Frejus; 18.05.2003 - 23.05.2003.

D. Duschlbauer, H. J. Böhm, H. E. Pettermann:
"Die Berechnung von Faserspannungen in Composites mit nicht ausgerichteten Fasern basierend auf der Mori-Tanaka Methode";
Vortrag: Workshop AG Composite 2002, Berlin; 18.11.2002 - 20.11.2002.


Habilitationsschriften


H. E. Pettermann:
"Continuum Mechanics Modeling of Composite Materials";
TU Wien, Fakultät für Maschinenbau, 2003.


Dissertationen (eigene und begutachtete)


J. Scheidl:
"Mixed kinematic modelling and simulation of slack belt drives using structural theories of rods and shells";
Betreuer/in(nen), Begutachter/in(nen): Y. Vetyukov, M. Krommer, H. E. Pettermann; Institut für Mechanik und Mechatronik, 2021; Rigorosum: 15.09.2021.

R. Riegler:
"Methodik zur Auslegung von gewickelten Rotoren für permanenterregte Axialflussmaschinen";
Betreuer/in(nen), Begutachter/in(nen): M. Grafinger, H. E. Pettermann, M. Leitner; Inst. für Konstruktionwissenschaften und Produktentwicklung, 2021; Rigorosum: 07.07.2021.

T. Ceglar:
"Modelling and simulation concepts for fibre reinforced polymers";
Betreuer/in(nen), Begutachter/in(nen): H. E. Pettermann, M. Todt, C. Schuecker, T. Antretter; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2021; Rigorosum: 30.04.2021.

J. Kaul:
"A constitutive model for fiber reinforced plies - Anisotropic evolution of damage and plasticity";
Betreuer/in(nen), Begutachter/in(nen): H. E. Pettermann, C. Schuecker, T. Antretter; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2020; Rigorosum: 28.08.2020.

M. Springer:
"Modeling and Simulation of Fatigue Damage in Power Semiconductors";
Betreuer/in(nen), Begutachter/in(nen): H. E. Pettermann, A. Turon, H.P. Gänser; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2017; Rigorosum: 14.12.2017.

S. Eisner:
"An extension to Nitsche-type mortaring for non-conforming finite elements";
Betreuer/in(nen), Begutachter/in(nen): M. Kaltenbacher, H. E. Pettermann; Mechanik und Mechatronik, 2016; Rigorosum: 06.07.2016.

M. Schwab:
"Modelling and Simulation of the Impact Behaviour of Fibre Reinforced Laminates and Components";
Betreuer/in(nen), Begutachter/in(nen): H. E. Pettermann, C. Schuecker, T. Antretter; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2016.

T. Pélisset:
"Degradation Analysis of Thin Die-Attach Layer under Cyclic Thermal Load in Microelectronics Packaging";
Betreuer/in(nen), Begutachter/in(nen): T. Antretter, H. E. Pettermann; Institut für Mechanik, Montanuniversität Leoben, 2015; Rigorosum: 15.06.2015.

G. Kravchenko:
"Numerical Simulations of Fatigue Crack Problems in Semiconductor Devices Subjected to Thermomechanical Loading";
Betreuer/in(nen), Begutachter/in(nen): H. E. Pettermann, M. Kaltenbacher; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2014; Rigorosum: 27.11.2014.

J. Gager:
"Modeling and Simulation Concepts for Advanced Braided Composites";
Betreuer/in(nen), Begutachter/in(nen): H. E. Pettermann, G. Pinter; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2013; Rigorosum: 08.11.2013.

S. Badshah:
"Identification of vibration and elastic properties of aluminium foam using modal testing and analysis";
Betreuer/in(nen), Begutachter/in(nen): J. Wassermann, H. E. Pettermann; Mechanik und Mechatronik, 2011; Rigorosum: 29.11.2011.

T. Flatscher:
"A Constitutive Model for the Elasto-Plasto-Damage Ply Behavior in Laminated FRP Composites: Its Development, Implementation, and Application in FEM Simulations";
Betreuer/in(nen), Begutachter/in(nen): H. E. Pettermann, G. Pinter; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2010; Rigorosum: 30.03.2010.

G. Wimmer:
"Computational Methods for the Prediction of Emergence and Growth of Delaminations in Laminated Composite Components";
Betreuer/in(nen), Begutachter/in(nen): H. E. Pettermann, O. Kolednik; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2009; Rigorosum: 28.01.2009.

M.M. Jan:
"Application of Damage Tolerant Design in Mechanical Engineering";
Betreuer/in(nen), Begutachter/in(nen): W. Eichlseder, H. E. Pettermann; Montanuniversität Leoben, 2008; Rigorosum: 28.11.2008.

C.O. Huber:
"Numerical Simulations of Metal Matrix Composites - Tribological Behavior and Finite Strain Response on Different Length Scales";
Betreuer/in(nen), Begutachter/in(nen): H. E. Pettermann, T. Antretter; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2008; Rigorosum: 21.02.2008.

M.H. Luxner:
"Modeling and Simualtion of Highly Porous Open Cell Structures - Elasto Plasticity and Localization versus Disorder and Defects";
Betreuer/in(nen), Begutachter/in(nen): H. E. Pettermann, J. Stampfl; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2006.

C. Schuecker:
"Mechanism Based Modeling of Damage and Failure in Fiber Reinforced Polymer Laminates";
Betreuer/in(nen), Begutachter/in(nen): H. E. Pettermann, S. Seidler; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2005.

H. E. Pettermann:
"Derivation and Finite Element Implementation of Constitutive Material Laws for Multiphase Composites Based on Mori-Tanaka Approaches";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, H.P. Degischer; Institut für Leichtbau und Flugzeugbau, TU Wien, 1997.


Diplom- und Master-Arbeiten (eigene und betreute)


Ch. Kalteis:
"Experimentelle Charakterisierung und Simulation von Dünnschichtverklebungen";
Betreuer/in(nen): M. Todt, H. E. Pettermann; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2021; Abschlussprüfung: 15.12.2021.

E. Sindhuber:
"Simulation von Schweißverzügen bei der Schienenfahrzeug-Fertigung";
Betreuer/in(nen): H. E. Pettermann; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2021; Abschlussprüfung: 15.04.2021.

A. Juen:
"Thermo-visko-elastische Simulationen von Metallpartikel-verstärkten Polymeren";
Betreuer/in(nen): H. E. Pettermann; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2020; Abschlussprüfung: 10/2020.

L. Huber:
"Modelling of time-temperature shifts of viscoelastic composites";
Betreuer/in(nen): H. E. Pettermann, M. Todt; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2020; Abschlussprüfung: 09/2020.

A. Wagner:
"Development of an Elasto-Damage Constitutive Law for Implicit Finite Element Methods";
Betreuer/in(nen): H. E. Pettermann; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2020; Abschlussprüfung: 09/2020.

S. Trummer:
"Klebverbindungen - Simulation und Experiment";
Betreuer/in(nen): M. Todt, T. Koch, H. E. Pettermann; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2020; Abschlussprüfung: 26.02.2020.

C. Kölbl:
"Untersuchung der strukturellen Stabilität und des Nachbeulverhaltens einer seilverspannten Gitterstruktur";
Betreuer/in(nen): M. Todt, H. E. Pettermann; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2019; Abschlussprüfung: 20.11.2019.

B. Jordanov:
"Finite Elemente Simulationen einer Composite-Geflechtstruktur";
Betreuer/in(nen): H. E. Pettermann, J. Kaul; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2019; Abschlussprüfung: 25.09.2019.

M. Huber:
"Implementierung eines Post-Processing-Tools zur Bestimmung des lokalen Spannungsvektors an Materialgrenzen";
Betreuer/in(nen): M. Todt, H. E. Pettermann; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2019; Abschlussprüfung: 09.05.2019.

C. Reichel:
"Bruchmechanische Simulation von Indentierungsversuchen in Gallium Nitrid";
Betreuer/in(nen): H. E. Pettermann; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2018; Abschlussprüfung: 20.06.2021.

V. Unger:
"Non-linear finite element simulations of nanoindentation in Gallium Nitride considering fracture mechanics and plasticity";
Betreuer/in(nen): H. E. Pettermann; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2018; Abschlussprüfung: 24.10.2018.

P. Hoffmann:
"Elasto-Plastic Finite Element Simulations of Nanoindentation Problems Utilizing Hill's Potential";
Betreuer/in(nen): H. E. Pettermann; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2018; Abschlussprüfung: 22.03.2018.

B. Kóbor:
"Finite Elemente Simulationen einer Lochplatte aus Faserverbund-Laminat";
Betreuer/in(nen): H. E. Pettermann, J. Kaul; Institute of Lightweight Design and Structural Biomechanics, 2018; Abschlussprüfung: 21.03.2018.

V. Björklund:
"Simulation of Delamination Migration in Laminated Composite Structures";
Betreuer/in(nen): R. Denzer, H. E. Pettermann, J. Kaul; Division of Solid Mechanics, Lund University, 2018.

M.M. Schasching:
"Finite Elemente Simulationen einer Composite-Struktur - Interaktion von Schichtschädigung und Delamination";
Betreuer/in(nen): H. E. Pettermann; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2017; Abschlussprüfung: 21.06.2017.

T. Ceglar:
"Finite Element Method Simulations of the Delamination in Laminated Composite Structures";
Betreuer/in(nen): H. E. Pettermann; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2017.

C. Riener:
"Entwicklung eines nichtlinearen Finite Elemente Simulationsmodells zur Nachbildung des Crash-Verhaltens von gewebeverstärkten CFK/Epoxid-Laminaten";
Betreuer/in(nen): H. E. Pettermann, M. Schwab; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2016; Abschlussprüfung: 12.04.2016.

M. Lamprecht:
"Schraubenrutschen unter dynamischer Belastung und Berechnung der effektiven Schnittigkeit einer querkraftbelasteten Schraubenverbindung";
Betreuer/in(nen): H. E. Pettermann; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2016.

S. Aigner:
"Berechnung, Bewertung und Dimensionierung eines LKW-Bauteils aus faserverstärkten Kunststoffen";
Betreuer/in(nen): H. E. Pettermann; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2015; Abschlussprüfung: 30.09.2015.

A. Blum:
"Finite Element Simulation of Uniaxial Periodic Structures";
Betreuer/in(nen): H. E. Pettermann, M. Schwab; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2015; Abschlussprüfung: 30.09.2015.

A. Salcher:
"FEM-Auslegung einer Kohlefaser-Geflechtstruktur";
Betreuer/in(nen): H. E. Pettermann, M. Schwab; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2015; Abschlussprüfung: 20.05.2015.

A. Bellés Meseguer:
"Numerical Simulations of the Crack Behavior of Brittle Cellular Materials";
Betreuer/in(nen): H. E. Pettermann; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2015; Abschlussprüfung: 26.03.2015.

J. Regueiro Penado:
"Linear Viscoelastic UMAT Development in the Frequency Domain";
Betreuer/in(nen): H. E. Pettermann; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2015.

M. Springer:
"Nichtlineare Finite Elemente Simulation der Schädigungsmechanismen sowie der Resttragfähigkeit von schlagbeanspruchten Kohlenstofffaser-Epoxidharz-Verbunden";
Betreuer/in(nen): H. E. Pettermann, M. Schwab; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2014; Abschlussprüfung: 18.09.2014.

J. Broger:
"Adaptation of an Elasto-Plasto-Damage Model from ABAQUS/Standard to ABAQUS/Explicit and its Application to Laminated FRP";
Betreuer/in(nen): H. E. Pettermann; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2014; Abschlussprüfung: 26.02.2014.

M. Gächter:
"Strukturoptimierung von Automobilkomponenten auf Basis von Ermüdungssimulationen";
Betreuer/in(nen): H. E. Pettermann; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2014.

M. Schwab:
"Prediction of Energy Dissipation due to Material Nonlinearities and its Application to Textile Composites";
Betreuer/in(nen): H. E. Pettermann; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2013; Abschlussprüfung: 25.11.2013.

D. Kremmel:
"FEM und Modellreduktion. Vergleichsstudie des Doorslams mit Kontaktberücksichtigung";
Betreuer/in(nen): H. E. Pettermann; Institut für Leichtbau und Struktur-Biomechanik, 2013.

M. Meindlhumer:
"Schädigungs- und Versagensvorhersage von Gewebelaminaten duch mechanismenbasierte Hüllflächen";
Betreuer/in(nen): H. E. Pettermann; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2013.

C. Pagès Miró:
"Quasi-Static Simulation of Laminated Structures with Explicit Finite Element Methods";
Betreuer/in(nen): H. E. Pettermann; Institut für Leichtbau und Struktur-Biomechanik, TU Wien; UPC Terrassa, 2013.

R. Gmeiner:
"Mechanische Eigenschaften glasfaserverstärkter Biopolymere";
Betreuer/in(nen): J. Stampfl, H. E. Pettermann; Institut für Werkstoffwissenschaft und Werkstofftechnologie, 2012; Abschlussprüfung: 31.05.2012.

A. Kholkin:
"Numerical Simulation of Damage and Failure of Laminated 3-Point Bending Specimens";
Betreuer/in(nen): H. E. Pettermann; Institut für Leichtbau und Struktur-Biomechanik, TU Wien; Universidade de Aveiro, 2012.

J.L. Mandayo Fernández:
"Numerical Simulations of the Crush Behavior of Cellular Structures";
Betreuer/in(nen): H. E. Pettermann; Institut für Leichtbau und Struktur-Biomechanik, TU Wien; Universidade de Vigo, 2012.

E. Rama Lista:
"Finite Element Simulations of Laminated Composites under Consideration of Nonlinear Ply Material and Delamination";
Betreuer/in(nen): H. E. Pettermann; Institut für Leichtbau und Struktur-Biomechanik, TU Wien; Universidade de Vigo, 2012.

A. Fürlinger:
"Entwicklung eines statisch überbestimmten Lastgeschirrs mit flexiblen Lasteinleitungselementen für Flugzeugstrukturversuche";
Betreuer/in(nen): H. E. Pettermann; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2011.

J. Hüsing:
"Numerische Simulation des Relaxationsverhaltens von viskoelastischen zellulären Strukturen";
Betreuer/in(nen): H. E. Pettermann; Institut für Leichtbau und Struktur-Biomechanik, TU Wien; TU Dresden, 2011.

T. Hinterdorfer:
"FE-Modellierung und -Analyse eines Komposit-Flywheel-Rotors und Optimierungsbetrachtungen";
Betreuer/in(nen): H. E. Pettermann; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2010; Abschlussprüfung: 27.10.2010.

J. Gager:
"Numerical Simulations of Delaminations and Cracks in Glued Die-Attach Semiconductor Devices";
Betreuer/in(nen): H. E. Pettermann; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2010; Abschlussprüfung: 09.02.2010.

M. Geiss:
"Mechanische Eigenschaften partikelverstärkter Biopolymere";
Betreuer/in(nen): J. Stampfl, H. E. Pettermann; Institut für Werkstoffwissenschaft und Werkstofftechnologie, 2006; Abschlussprüfung: 22.05.2006.

G. Wimmer:
"Strength Analyse of Composite Components - Implementation of New Procedures";
Betreuer/in(nen): H. E. Pettermann, D. H. Pahr; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2006.

J.F. Winklinger:
"Investigation of Corner Joints of Sandwich Plates";
Betreuer/in(nen): H. E. Pettermann; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2006.

M. Seyr:
"Numerische Simulation von regelmäßigen zellulären Strukturen";
Betreuer/in(nen): H. J. Böhm, H. E. Pettermann; Institut für Leichtbau und Flugzeugbau, TU Wien, 2003.


Wissenschaftliche Berichte


R. Duy, M. Schasching, M. Todt, H. E. Pettermann:
"Wrinkling of hyperelastic sheets in the finite strain regime";
Bericht für Polymer Competence Center Leoben GmbH (PCCL); Berichts-Nr. ILSB-Report 309, 2021; 18 S.

H. E. Pettermann, T. Ceglar:
"Unit Cell Predictions of a [90/0/0/90] FRE Laminate Under Uniaxial Stress in 45◦ Direction";
Bericht für Polymer Competence Center Leoben GmbH (PCCL); Berichts-Nr. ILSB-Report 307, 2021; 6 S.

M. Schasching, R. Duy, M. Todt, H. E. Pettermann:
"Wrinkling of Anisotropic Hyperelastic Sheets in the Finite Strain Regime";
Bericht für Polymer Competence Center Leoben GmbH (PCCL); Berichts-Nr. ILSB-Report 310, 2021; 34 S.

T. Ceglar, H. E. Pettermann:
"Nonlinear homogenisation of a FRE unit cell (confidential)";
Bericht für Polymer Competence Center Leoben GmbH (PCCL); Berichts-Nr. ILSB-Report 304, 2020; 13 S.

T. Ceglar, H. E. Pettermann:
"Preliminary study on Fiber Reinforced Elastomer (FRE) behavior by means of unit cell FEM simulations (confidential)";
Bericht für Polymer Competence Center Leoben GmbH (PCCL); Berichts-Nr. ILSB-Report 306, 2020; 9 S.

T. Ceglar, H. E. Pettermann:
"Wrinkling of thin fibre reinforced elastomer shells under tensile loads (confidential)";
Bericht für Polymer Competence Center Leoben GmbH (PCCL); Berichts-Nr. ILSB-Report 305, 2020; 14 S.

T. Ceglar, H. E. Pettermann:
"Calibration of material parameters for Fung´s and Holzapfel-Gasser-Ogden anisotropic hyperelastic strain energy functions: Application for fibre reinforced elastomers (Confidental)";
Bericht für Polymer Competence Center Leoben GmbH (PCCL); Berichts-Nr. ILSB-Report 303, 2019; 33 S.

T. Ceglar, H. E. Pettermann:
"Work-flow for modelling and simulation of multi-fibre unit cells under tri-axial loading (Confidental)";
Bericht für Polymer Competence Center Leoben GmbH (PCCL); Berichts-Nr. ILSB-Report 302, 2018; 24 S.

H. E. Pettermann:
"Direction Dependent Time-Temperature-Shift Functions and Energy Considerations in Viscoelasticity";
Berichts-Nr. ILSB-Report 301, 2018; 24 S.

T. Ceglar, H. E. Pettermann:
"FEM simulations of fully and nearly incompressible hyperelastic materials: The effects of numerical precision (Confidental)";
Bericht für Polymer Competence Center Leoben GmbH (PCCL); Berichts-Nr. ILSB-Report 300, 2017; 15 S.

C. Cheyrou, H. E. Pettermann:
"FEM Simulation of the Thermo-Viscoelastic Behaviour of Composites";
Bericht für Institut für Leichtbau und Struktur-Biomechanik, TU Wien; Berichts-Nr. ILSB-Report 298, 2016; 49 S.

H. E. Pettermann:
"Linear Thermo-Viscoelastic Orthotropic Plane Stress Constitutive Law in the Time Domain";
Bericht für Institut für Leichtbau und Struktur-Biomechanik; Berichts-Nr. ILSB-Report 297, 2015; 37 S.

M. Todt, M. Schwab, H. E. Pettermann:
"Impact modeling in ABAQUS/Explicit - An introduction";
Bericht für Institut für Leichtbau und Struktur-Biomechanik, TU Wien; Berichts-Nr. ILSB-Report 292, 2014; 18 S.

M. Todt, M. Schwab, H. E. Pettermann:
"Modeling of Transverse Shear in Layered Composite Structures With Cohesive Elements";
Bericht für Institut für Leichtbau und Struktur-Biomechanik, TU Wien; Berichts-Nr. ILSB-Report 293, 2014; 25 S.

T. Flatscher, H. E. Pettermann:
"PCCL Experiments Series III and Combination UMAT-EPD-FRP/CZE";
Bericht für Polymer Compentence Center Leoben (PCCL); Berichts-Nr. 01/2010, 2010; 16 S.

H. E. Pettermann:
"Viscoelastic Mechanical Properties of Cellular Materials and Structures - The Development of an ABAQUS UMAT";
Bericht für Institut für Leichtbau und Struktur-Biomechanik, TU Wien; Berichts-Nr. ILSB Report 252, 2010; 14 S.

C. Schuecker, C.G. Dávila, H. E. Pettermann:
"Modeling the Non-Linear Response of Fiber-Reinforced Laminates Using a Combined Damage/Plasticity Model";
Bericht für National Aeronauticas and Space Administration, Washington, DC; Berichts-Nr. NASA/TM-2008-215314, 2008; 25 S.

H. E. Pettermann, C. Schuecker, C.O. Huber, G. Wimmer:
"AAR-ILSB-Jahresbericht der strategischen Forschung im 5. Projektjahr";
Bericht für Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR); Berichts-Nr. AAR-ILSB 27/2006, 2006; 14 S.

C. Schuecker, H. E. Pettermann:
"Doppelwandiger Tank für kryogene Anwendungen: Vorstudien zur Berechnung der Außenwand unter Druckbelastung";
Bericht für Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR); 2006; 12 S.

C. Schuecker, H. E. Pettermann:
"SHM Tests an Rohrproben: Festigkeitsberechnung bei Raumtemperatur";
Bericht für Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR); Berichts-Nr. AAR-ILSB 26/2006, 2006; 12 S.

H. E. Pettermann, C. Schuecker, C.O. Huber:
"AAR-ILSB-Jahresbericht der strategischen Forschung im 4. Projektjahr";
Bericht für Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR); 2005.

I. Smojver, C. Schuecker, H. E. Pettermann:
"Damage Meso-Model for Fatigue Analysis of Fiber Reinforced Laminates";
Bericht für Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR); 2005.

C.O. Huber, H. E. Pettermann:
"Some Basics on Tribology";
Bericht für Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR); 2004.

H. E. Pettermann, C. Schuecker, C.O. Huber:
"AAR-ILFB-Jahresbericht der strategischen Forschung im 3. Projektjahr";
Bericht für Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR); 2004.

H. E. Pettermann, C. Schuecker, C.O. Huber:
"Arbeitsprogramm des ILSB im Rahmen der strategischen Forschung im 4. Projektjahr";
Bericht für Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe; 2004; 5 S.

C. Schuecker, H. E. Pettermann:
"Kreisplatte unter zentrischer Druckbelastung als Test für interlaminare Schubfestigkeit von Laminaten";
Bericht für Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR); 2004.

C. Schuecker, H. E. Pettermann:
"Kreisplatte unter zentrischer Druckbelastung als Test für interlaminare Schubfestigkeit von Laminaten - Teil II";
Bericht für Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR); 2004.

C. Schuecker, H. E. Pettermann:
"Literature Review - Damage Modeling of Fiber Reinforced Laminates";
Bericht für Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR); 2004.

H. E. Pettermann, C. Schuecker:
"AAR-ILFB-Jahresbericht der strategischen Forschung im 2. Projektjahr";
Bericht für Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR); 2003.

H. E. Pettermann, C. Schuecker:
"Arbeitsprogramm des ILFB im Rahmen der strategischen Forschung im 2. Projektjahr";
Bericht für Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR); 2003.

H. E. Pettermann, C. Schuecker:
"Arbeitsprogramm des ILFB im Rahmen der strategischen Forschung im 3. Projektjahr";
Bericht für Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR); 2003.

T. Daxner, H. E. Pettermann:
"Optimization of Laminates with Genetic Algorithms";
Bericht für Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR); 2002.

D. Duschlbauer, H. E. Pettermann:
"Finite Elemente basierende Parameterstrudie zur Verdichtung von porösem Molybdän unter dreiachsigen Beanspruchungszusändent";
Bericht für Plansee AG; 2002.

H. E. Pettermann:
"Arbeitsprogramm des ILFB im Rahmen der strategischen Forschung";
Bericht für Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR); 2002.

H. E. Pettermann, C. Schuecker:
"AAR-ILFB Jahresbericht der strategischen Forschung";
Bericht für Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR); 2002.

C. Schuecker, H. E. Pettermann:
"Effektive Permeabilität von Laminaten in Dickenrichtung";
Bericht für Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR); 2002.