Publication list for
Heinz E. Pettermann
E317 - Institute for Lightweight Design and Structural Biomechanics
as author or essentially involved person
318 records (1991 - 2022)
Books and Book Editorships
H. E. Pettermann:
"Derivation and Finite Element Implementation of Constitutive Material Laws for Multiphase Composites Based on Mori-Tanaka Approaches";
VDI Verlag GmbH,
Düsseldorf,
1997,
ISBN: 3-18-321718-x;
116 pages.
Publications in Scientific Journals
P. Hoffmann, S. Moser, C. Kofler, M. Nelhiebel, D. Tscharnuter, B. Karunamurthy, H. E. Pettermann, M. Todt:
"Thermomechanical fatigue damage modeling and material parameter calibration for thin film metallizations";
International Journal of Fatigue,
155
(2022),
106627.
B. Werner, O. Červinek, D. Koutný, A.G. Reisinger, H. E. Pettermann, M. Todt:
"Numerical and experimental study on the collapse of a triangular cell under compression";
International Journal of Solids and Structures,
236-237
(2022),
111295.
J. Kaul, H. E. Pettermann:
"A constitutive model for fiber reinforced polymer plies - Implicit anisotropic evolution of damage and plasticity based on effective strengths";
Composites Part C: Open Access,
4
(2021),
100097.
M. Springer, A. Turon, H. E. Pettermann:
"A thermo-mechanical cyclic cohesive zone model for variable amplitude loading and mixed-mode behavior";
International Journal of Solids and Structures,
159
(2019),
257
- 271.
B. Werner, M. Todt, H. E. Pettermann:
"Nonlinear Finite Element Study of Beams with Elasto‐Plastic Damage Behavior in the Post‐Buckling Regime";
PAMM,
19
(2019),
1;
2 pages.
H. E. Pettermann, A. DeSimone:
"An anisotropic linear thermo-viscoelastic constitutive law";
Mechanics of Time-Dependent Materials,
22
(2018),
4;
421
- 433.
M. Schwab, M. Todt, H. E. Pettermann:
"A multiscale approach for modelling impact on woven composites under consideration of the fabric topology";
Journal of Composite Materials,
52
(2018),
21;
2859
- 2874.
M. Schwab, M. Todt, J Tauchner, D. Schlie, H. E. Pettermann:
"Modeling, simulation, and experiments of high velocity impact on laminated composites";
Composite Structures,
205
(2018),
42
- 48.
M. Springer, H. E. Pettermann:
"Fatigue life predictions of metal structures based on a low-cycle, multiaxial fatigue damage model";
International Journal of Fatigue,
116
(2018),
355
- 365.
M. Schwab, H. E. Pettermann:
"Modeling and Simulation of Damage and Failure in Large Composite Components Subjected to Impact Loads";
Composite Structures,
158
(2016),
208
- 216.
M. Schwab, M. Todt, M. Wolfahrt, H. E. Pettermann:
"Failure Mechanism Based Modelling of Impact on Fabric Reinforced Composite Laminates Based on Shell Elements";
Composites Science and Technology,
128
(2016),
131
- 137.
M. Springer, M. Nelhiebel, H. E. Pettermann:
"Combined Simulation of Fatigue Crack Nucleation and Propagation Based on a Damage Indicator";
Frattura ed Integrità Strutturale,
38
(2016),
155
- 161.
J. Gager, H. E. Pettermann:
"FEM Modeling of Multilayered Textile Composites Based on Shell Elements";
Composites - Part B: Engineering,
77
(2015),
46
- 51.
T. Flatscher, C. Schuecker, H. E. Pettermann:
"A Constitutive Ply Model for Stiffness Degradation and Plastic Strain Accumulation: Its Application to the Third World Wide Failure Exercise (Part A)";
Journal of Composite Materials,
47
(2013),
2575
- 2593.
T. Flatscher, M. Wolfahrt, G. Pinter, H. E. Pettermann:
"Simulations and Experiments of Open Hole Tension Tests - Assessement of Intra-Ply Plasticity, Damage and Localization";
Composites Science and Technology,
72
(2012),
10;
1090
- 1095.
J. Gager, H. E. Pettermann:
"Numerical Homogenization of Textile Composites Based on Shell Element Discretization";
Composites Science and Technology,
72
(2012),
7;
806
- 812.
H. E. Pettermann, J. Hüsing:
"Modeling and Simulation of Relaxation in Viscoelastic Open Cell Materials and Structures";
International Journal of Solids and Structures,
49
(2012),
2848
- 2853.
D. Duschlbauer, H. J. Böhm, H. E. Pettermann:
"Modeling Interfacial Effects on the Thermal Conduction Behavior of Short Fiber Reinforced Composites";
International Journal of Materials Research,
2011
(2011),
6;
717
- 726.
T. Flatscher, H. E. Pettermann:
"A Constitutive Model for Fiber-Reinforced Polymer Plies Accounting for Plasticity and Brittle Damage Including Softening - Implementation for Implicit FEM";
Composite Structures,
93
(2011),
9;
2241
- 2249.
H. E. Pettermann, C.O. Huber, M.H. Luxner, S. Nogales, H. J. Böhm:
"An Incremental Mori-Tanaka Homogenization Scheme for Finite Strain Thermoelastoplasticity of MMCs";
Materials,
3
(2010),
1;
434
- 451.
H. J. Böhm, D. Duschlbauer, H. E. Pettermann, J. Segurado, A. F. Plankensteiner:
"Modeling of the Densification of Porous Molybdenum by a Unit Cell Approach";
Journal of the Mechanical Behavior of Materials,
19
(2009),
5;
289
- 296.
T. Flatscher, C. Schuecker, H. E. Pettermann:
"A Constitutive Model for Continuous Fiber Reinforced Polymer Plies";
PAMM,
9
(2009),
23
- 26.
T. Flatscher, C. Schuecker, H. E. Pettermann:
"Prediction of Plastic Strain Accumulation in Continuous Fiber Reinforced Laminates by a Constitutive Ply Model";
International Journal of Fracture,
158
(2009),
2;
145
- 156.
M.H. Luxner, J. Stampfl, H. E. Pettermann:
"Nonlinear Simulations on the Interaction of Disorder and Defects in Open Cell Structures";
Computational Materials Science,
47
(2009),
2;
418
- 428.
M.H. Luxner, A. Woesz, J. Stampfl, P. Fratzl, H. E. Pettermann:
"A Finite Element Study on the Effects of Disorder in Cellular Structures";
Acta Biomaterialia,
5
(2009),
381
- 390.
G. Wimmer, W. Kitzmüller, G. Pinter, T. Wettemann, H. E. Pettermann:
"Computational and Experimental Investigation of Delamination in L-Shaped Laminated Composite Components";
Engineering Fracture Mechanics,
76
(2009),
18;
2810
- 2820.
G. Wimmer, H. E. Pettermann:
"Prediction of Delamination Growth in Laminated Structures Loaded by Quasi-Static and Cyclic Loads";
Journal of Composite Materials,
43
(2009),
12;
3303
- 3324.
G. Wimmer, C. Schuecker, H. E. Pettermann:
"Numerical Simulation of Delamination in Laminated Composite Components - A Combination of a Strength Criterion and Fracture Mechanics";
Composites - Part B: Engineering,
40
(2009),
2;
158
- 165.
H. E. Pettermann:
"Theorie und Anwendung von nichtlinearen Konstitutivgesetzen für Verbundwerkstoffe im Rahmen von FEM Analysen";
NAFEMS Magazin,
http://www.nafems.org/downloads/magazin/
(2008),
10;
8 pages.
C. Schuecker, H. E. Pettermann:
"Constitutive Ply Damage Modeling, FEM Implementation, and Analysis of Laminated Structures";
Computers and Structures,
86
(2008),
9;
908
- 918.
C. Schuecker, H. E. Pettermann:
"Fiber Reinforced Laminates: Progressive Damage Modeling Based on Failure Mechanisms";
Archives of Computational Methods in Engineering,
15
(2008),
2;
163
- 184.
G. Wimmer, H. E. Pettermann:
"A Semi-Analytical Model for the Simulation of Delamination in Laminated Composites";
Composites Science and Technology,
68
(2008),
12;
2332
- 2339.
M.H. Luxner, J. Stampfl, H. E. Pettermann:
"Numerical simulations of 3D open cell structures - Influence of structural irregularities on elasto-plasticity and deformation localization";
International Journal of Solids and Structures,
44
(2007),
2990
- 3003.
D. Duschlbauer, H. J. Böhm, H. E. Pettermann:
"Computational Simulation of Composites Reinforced by Planar Random Fibers: Homogenization and Localization by Unit Cell and Mean Field Approaches";
Journal of Composite Materials,
40
(2006),
24;
2217
- 2234.
C. Schuecker, D. H. Pahr, H. E. Pettermann:
"Accounting for Residual Stresses in FEM Analyses of Laminated Structures Using the Puck Criterion for Three-Axial Stress States";
Composites Science and Technology,
66
(2006),
13;
2054
- 2062.
C. Schuecker, H. E. Pettermann:
"A Continuum Damage Model for Fiber Reinforced Laminates Based on Ply Failure Mechanisms";
Composite Structures,
76
(2006),
1-2;
162
- 173.
J. Stampfl, M.H. Luxner, H. E. Pettermann:
"Zellulare Werkstoffe mit frei wählbarer Zellgeometrie - Herstellung, Modellierung der mechanischen Eigenschaften und Anwendungen";
Lignovisionen,
14
(2006),
55
- 60.
G. Wimmer, C. Schuecker, H. E. Pettermann:
"Numerical Simulation of Delamination Onset and Growth in Laminated Composites";
The e-Journal of Nondestructive Testing,
11
(2006),
12;
10 pages.
M.H. Luxner, J. Stampfl, H. E. Pettermann:
"Finite Element Modeling Concepts and Linear Analyses of 3D Regular Open Cell Structures";
Journal of Materials Science,
40
(2005),
22;
5859
- 5866.
I. Sabirov, D. Duschlbauer, H. E. Pettermann, O. Kolednik:
"The Determination of the Local Conditions for Void Initiation in Front of a Crack Tip for Materials with Second Phase Particles";
Materials Science and Engineering A,
393
(2005),
275
- 285.
D. H. Pahr, C. Schuecker, F. G. Rammerstorfer, H. E. Pettermann:
"Numerical Investigations of Perforated Laminates in the Presence of Residual Ply Stresses";
Journal of Composite Materials,
38
(2004),
22;
1977
- 1991.
T. Daxner, F. G. Rammerstorfer, J. Segurado, H. E. Pettermann:
"Numerical Simulations of the Creep Deformation of MMCs in 4-Point Bending Mode";
Journal of Engineering Materials and Technology,
125
(2003),
1;
50
- 55.
D. Duschlbauer, H. J. Böhm, H. E. Pettermann:
"Numerical Simulation of Thermal Conductivity of MMCs: Effect of Thermal Interface Resistance";
Materials Science and Technology,
19
(2003),
8;
1107
- 1114.
D. Duschlbauer, H. E. Pettermann, H. J. Böhm:
"Heat Conduction of a Spheroidal Inhomogeneity with Imperfectly Bonded Interface";
Journal of Applied Physics,
94
(2003),
3;
1539
- 1549.
D. Duschlbauer, H. E. Pettermann, H. J. Böhm:
"Mori-Tanaka Based Evaluation of Inclusion Stresses in Composites with Nonaligned Reinforcements";
Scripta Materialia,
48
(2003),
3;
223
- 228.
E. Neubauer, C. Eisenmenger-Sittner, H. Bangert, D. Duschelbauer, H. E. Pettermann, G. Korb:
"Tailored Interfaces In Cu-C composite Materials Using Coated Fibers And Hot Pressing Methods";
Mat. Tech & Adv. Perf. Mat.,
18
(2003),
3;
144
- 149.
E. Neubauer, C. Eisenmenger-Sittner, H. Bangert, D. Duschlbauer, H. E. Pettermann, G. Korb:
"Tailored Interfaces in Cu-C Composite Materials Using Coated Fibers and Hot Pressing Methods";
Materials Technology,
18
(2003),
3;
144
- 149.
H. E. Pettermann, H. J. Böhm, J. Alcalá:
"Normalized Diagrams for Micro-Mechanical Estimates of the Elastic Response of Composite Materials";
Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science,
33A
(2002),
10;
3187
- 3199.
H. E. Pettermann:
"Numerical simulations of a compositionally graded structure using a hierarchical approach";
Materials Science and Engineering A,
276
(2000),
1-2;
277
- 282.
A. Saigal, A.E. Giannakopoulos, S. Suresh, H. E. Pettermann:
"Electrical Response during Indentation of a 1-3 Piezoelectric Ceramic-Polymer Composite";
Journal of Applied Physics,
86
(1999),
1;
603
- 606.
A. F. Plankensteiner, H. J. Böhm, F. G. Rammerstorfer, H. E. Pettermann:
"Multiscale Modeling of Highly Heterogeneous Particulate MMCs";
Journal de Physique,
8
(1998),
301
- 308.
H. E. Pettermann, H. J. Böhm, F. G. Rammerstorfer:
"Some Direction Dependent Properties of Matrix-Inclusion Type Composites with Given Reinforcement Orientation Distributions";
Composites - Part B: Engineering,
28B
(1997),
3;
253
- 265.
H. E. Pettermann, T.J. Reiter, F. G. Rammerstorfer:
"Computational Simulation of Internal Bone Remodeling";
Archives of Computational Methods in Engineering,
4
(1997),
295
- 323.
E. Weissenbek, H. E. Pettermann, S. Suresh:
"Elasto-Plastic Deformation in Compositionally Graded Metal-Ceramic Structures";
Acta Materialia,
45
(1997),
8;
3401
- 3417.
H. E. Pettermann, H. J. Böhm:
"Effective Thermoelastic Behavior of Composites with a Given Orientation Distribution of Inclusions";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik,
75
(1995),
Supplement 1;
161
- 162.
H. E. Pettermann, T.J. Reiter, F. G. Rammerstorfer:
"Ein Simulationsalgorithmus der natürlichen Anpassung des orthotropen Knochenmaterials";
Biomedizinische Technik,
40
(1995),
E2;
127
- 129.
G. Mailath-Pokorny, H. E. Pettermann, H. J. Böhm, D. Scheidle, W. Lill, G. Watzek:
"Zur Biomechanik der transdentalen Fixation";
Zeitschrift für zahnärztliche Implantologie,
7
(1991),
138
- 143.
Contributions to Books
H. E. Pettermann, C. Schuecker:
"Damage and Failure in Layered Composite Structures";
in: "Encyclopedia of Continuum Mechanics",
H. Altenbach, A. Öchsner (ed.);
Springer,
Berlin, Heidelberg,
2020,
ISBN: 978-3-662-55771-6,
11 pages.
H. J. Böhm, H. E. Pettermann, S. Nogales:
"Continuum Modeling of Diffusive Transport in Inhomogeneous Solids";
in: "Heat Transfer in Multi-Phase Materials",
A. Öchsner, G.E. Murch (ed.);
Springer-Verlag,
Berlin,
2011,
ISBN: 978-3642044021,
3
- 32.
J. Stampfl, H. E. Pettermann, R. Liska:
"Bioinspired Cellular Structures: Additive Manufacturing and Mechanical Properties";
in: "Biomimetics - Materials, Structures and Processes",
P. Gruber, D. Bruckner, Ch. Hellmich, H. Schmiedmayer, H. Stachelberger, I. Gebeshuber (ed.);
Springer-Verlag,
Berlin,
2011,
ISBN: 978-3642119330,
105
- 123.
J. Stampfl, H. E. Pettermann, M.H. Luxner:
"Fabrication and Characterization in the Micro-Nano Range";
in: "Fabrication and Characterization in the Micro/Nano Range",
F. Lasagni, A. Lasagni (ed.);
Springer-Verlag,
Berlin,
2011,
ISBN: 978-3-642-17781-1,
95
- 117.
C. Schuecker, H. E. Pettermann:
"Combining Elastic Brittle Damage with Plasticity to Model the Non-Linear Behavior of Fiber Reinforced Laminates";
in: "Mechanical Response of Composites",
P.P. Camanho, C.G. Dávila, S.T. Pinho, J.J.C. Remmers (ed.);
Springer-Verlag,
Berlin,
2008,
ISBN: 978-1-4020-8583-3,
99
- 117.
Contributions to Proceedings
M.H. Luxner, H. E. Pettermann:
"Modeling and Simulation of Highly Porous Open Cell Structures: Elasto-Plasticity and Localization Versus Disorder and Defects";
in: "IUTAM Symposium on Mechanical Properties of Cellular Materials",
H. Zhao, N. A. Fleck (ed.);
issued by: IUTAM;
Springer-Verlag,
Berlin,
2009,
ISBN: 978-1-4020-9403-3,
125
- 134.
G. Wimmer, H. E. Pettermann:
"Numerical Simulation of Progressive Growth of Delaminations with Curved Fronts";
in: "Proceedings of Composites 2009",
issued by: ECCOMAS;
Imperial College,
London,
2009,
6 pages.
H. E. Pettermann:
"Theory and Application of Non-Linear Constitutive Laws for Composite Materials within the Framework of FEM Structural Analyses";
in: "Simulating Composite: Materials and Structures",
issued by: NAFEMS;
NAFEMS Deutschland, Österreich, Schweiz,
Grafing,
2007,
ISBN: 978-1-874376-28-6.
M.H. Luxner, J. Stampfl, A. Woesz, P. Fratzl, H. E. Pettermann:
"Influence of Structural Disorder on the Performance of 3D Open Cell Structures";
in: "Proceedings of the III European Conference on Computational Solids and Structural Mechanics",
issued by: ECCOMAS;
Associção Portuguesa de Mecânica Teórica, Aplicada e Computacional,
Lisboa,
2006,
Paper ID 1752,
15 pages.
C. Schuecker, H. E. Pettermann:
"Constitutive Ply Damage Modeling, FEM Implementation, and Analyses of Laminated Structures";
in: "Proceedings of the III European Conference on Computational Solids and Structural Mechanics",
issued by: ECCOMAS;
Associção Portuguesa de Mecânica Teórica, Aplicada e Computacional,
Lisboa,
2006,
Paper ID 1759,
11 pages.
C. Schuecker, H. E. Pettermann:
"A Mechanism Based Damage Meso-Model for Fiber Reinforced Laminates";
in: "Fifteenth International Conference on Composite Materials (ICCM-15) - Extended Abstracts and Papers",
V.E. Verijenko, S. Adali, E. Morosov, C.J. von Klemperer (ed.);
issued by: International Committee on Composite Materials;
University of KwaZulu-Natal,
Durban,
2005,
ISBN: 1-86840-589-3,
Paper ID 07d,
10 pages.
D. H. Pahr, C. Schuecker, F. G. Rammerstorfer, H. E. Pettermann:
"Investigations of Perforated Laminates in the Presence of Residual Stress";
in: "Proceedings of the 11th European Conference on Composite Materials",
European Society of Composite Materials,
London,
2004,
Paper ID C151,
10 pages.
C. Schuecker, D. H. Pahr, H. E. Pettermann:
"Numerical Simulation of Composite Structures - First Ply Failure under Non-Proportional Loading";
in: "Multiscaling in Applied Science and Emerging Technology",
G.C. Sih, T.B. Kermanidis, S.G. Pantelakis (ed.);
Laboratory of Technology and Strength of Materials, University of Patras,
Patras,
2004,
280
- 286.
J. Stampfl, M. Seyr, M.H. Luxner, H. E. Pettermann, A. Wöss, P. Fratzl:
"Regular, Low Density Cellular Structures-Rapid Prototyping, Numerical Simulation, Mechanical Testing";
in: "Biological and Bioinspired Materials and Devices (Mater. Res. Soc. Symp. Proc. 823)",
J. Aizenberg, W.J. Landis, C. Orme, R. Wang (ed.);
issued by: MRS;
Materials Research Society,
Warrendale, PA,
2004,
ISBN: 1-55899-773-3,
Paper ID W8.8,
6 pages.
D. Duschlbauer, H. E. Pettermann:
"Numerical Simulation of Composite Materials by Multi-Fiber Unit Cells";
in: "Proceedings of the 21st CAD-FEM User's Meeting 2003",
CADFEM GmbH,
Grafing,
2003,
ISBN: 3-937523-00-6,
6 pages.
D. Duschlbauer, H. E. Pettermann, H. J. Böhm:
"Rechnerische Simulation der Wärmeleitungseigenschaften von MMCs mit spezieller Berücksichtigung eines thermischen Widerstandes am Interface";
in: "Verbundwerkstoffe",
H.P. Degischer (ed.);
issued by: DGM;
Wiley-VCH,
Weinheim,
2003,
ISBN: 3-527-30762-1,
555
- 562.
I. Sabirov, D. Duschlbauer, H. E. Pettermann, O. Kolednik:
"The Void Initiation near the Crack Tip in Aluminum Based Metal Matrix Composites;";
in: "Verbundwerkstoffe",
H.P. Degischer (ed.);
issued by: DGM;
Wiley-VCH,
Weinheim,
2003,
ISBN: 3-527-30762-1,
127
- 133.
H. J. Böhm, C.M. Chimani, H. E. Pettermann, A.F. Plankensteiner, F. G. Rammerstorfer:
"Multiscale Treatment of Inhomogeneous Materials by Finite Elements";
in: "Discretization Methods in Structural Mechanics",
H.A. Mang, F. G. Rammerstorfer (ed.);
Kluwer Academic Publishers,
Dordrecht,
1999,
ISBN: 978-0-7923-5591-5,
257
- 264.
H. E. Pettermann, E. Weissenbek, S. Suresh:
"Simulation of the Elasto-Plastic Deformation in Compositionally Graded Metal-Ceramic Structures: Mean-Field and Unit-Cell Approaches";
in: "Functionally Graded Materials",
M. Miyamoto, I. Shiota (ed.);
Elsevier,
Amsterdam,
1997,
74
- 80.
Talks and Poster Presentations (with Proceedings-Entry)
K. Anam, M. Todt, H. E. Pettermann:
"Computationally Efficient Modeling Of Delamination Behavior In Laminated Composites";
Talk: 8th ECCOMAS Thematic Conference on the Mechanical Response of Composites,
Göteborg;
09-22-2021
- 09-24-2021; in: "Proceedings of the 8th ECCOMAS Thematic Conference on the Mechanical Response of Composites",
M. Fagerström, G. Catalanotti (ed.);
CT02 - Delamination II
(2021),
1
- 12.
T. Ceglar, H. E. Pettermann:
"Homogenization Of Fiber Reinforced Elastomer Laminates";
Talk: 8th ECCOMAS Thematic Conference on the Mechanical Response of Composites,
Göteborg;
09-22-2021
- 09-24-2021; in: "Proceedings of the 8th ECCOMAS Thematic Conference on the Mechanical Response of Composites",
M. Fagerström, G. Catalanotti (ed.);
CT10 - Multi-Scale Modelling IV
(2021),
1
- 7.
P. Hoffmann, M. Nelhiebel, B. Karunamurthy, H. E. Pettermann, M. Todt:
"Simulation of Fatigue Damage in Clusters of DMOS Cells Subjected to Non-Uniform Transient Thermo-Mechnical Loading";
Talk: 21st International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE),
Virtuell;
07-06-2020
- 07-27-2020; in: "2020 21st International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE)",
IEEE Xplore,
(2020),
1
- 9.
J. Kaul, H. E. Pettermann:
"A Constitutive Model For Fiber Reinforced Polymer Plies - Plastic Yielding With Kinematic Hardening Behavior";
Talk: 7th ECCOMAS Thematic Conference on the Mechanical Response of Composites,
Girona, Spain;
09-18-2019
- 09-20-2019; in: "Proceedings of the 7th ECCOMAS Thematic Conference on the Mechanical Response of Composites",
A. Turon, P. Maimí, M. Fagerström (ed.);
(2019),
141
- 152.
H. E. Pettermann, C. Cheyrou, A. DeSimone:
"An Anisotropic Linear Viscoelastic Constitutive Law - Direction Dependent Time Temperature Shift Functions";
Keynote Lecture: 7th ECCOMAS Thematic Conference on the Mechanical Response of Composites,
Girona (invited);
09-18-2019
- 09-20-2019; in: "Proceedings of the 7th ECCOMAS Thematic Conference on the Mechanical Response of Composites",
A. Turon, P. Maimí, M. Fagerström (ed.);
(2019),
35
- 44.
M. Springer, A. Turon, H. E. Pettermann:
"A Cyclic Cohesive Zone Model Accounting for Changes in the Fatigue Crack Growth Rate Caused by Variable Amplitude Loading and Pre-damaged Interfaces";
Talk: 19th International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics (42nd National Symposium on Fatigue and Fracture Mechanics),
Denver, Colorado, USA;
05-15-2019
- 05-17-2019; in: "Proceedings of the 19th International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics (42nd National Symposium on Fatigue and Fracture Mechanics)",
(2019),
1
- 6.
J. Kaul, R. Duy, H. E. Pettermann:
"Multi-Hierarchical Fem Simulations Of A Fabric Laminated Structure Taking Into Account Anisotropic Plasticity And Damage";
Talk: 12th International Conference on Composite Science and Technology (ICCST 12),
Sorrento, Italy;
05-08-2019
- 05-10-2019; in: "Proceedings of the 12th International Conference on Composite Science and Technology",
(2019),
1
- 2.
P.F. Fuchs, M.R. Mansouri, T. Ceglar, J. Beter, B. Schrittesser, H. E. Pettermann:
"Berechnung von Lastkopplungen in verstärkten Elastomeren";
Talk: 28.Leobener K unststoff-Kolloquium: Simulation in der Kunststofftechnik,
Leoben;
04-25-2019
- 04-26-2019; in: "28.Leobener K unststoff-Kolloquium: Simulation in der Kunststofftechnik",
Eigenverlag Lehrstuhl für Konstruieren in Kunst- und Verbundstoffen, Department Kunststofftechnik, Montanuniversität Leoben,
Schriftenreihe Kunststofftechnik Leoben / 9 / Leoben
(2019),
ISBN: 978-3-9503248-9-1;
44
- 50.
J. Kaul, H. E. Pettermann:
"A constitutive model for fiber reinforced polymer plies - coupling of plastic and elasto-damage mechanisms";
Talk: 6th European Conference on Computational Mechanics (Solids, Structures and Coupled Problems) (ECCM 6),
Glasgow, UK;
06-11-2018
- 06-15-2018; in: "Proceedings of the 6th European Conference on Computational Mechanics (ECCM 6)",
R. de Borst, J. Reese, C. Pearce (ed.);
(2018),
12 pages.
M. Springer, H. E. Pettermann:
"A Thermo-Mechanical Fatigue Damage Modeling Methodology for Power Semiconductor Robustness Validation Studies";
Talk: 19 th Annual International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE 2018),
Toulouse, France;
04-15-2018
- 04-18-2018; in: "Proceedings of the 19 th Annual International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems",
W.D. Van Driel, P. Rodgers, Ch. Bailey, B. Vandevelde, O. de Saint Leger, G.Q. Zhang (ed.);
(2018),
ISBN: 978-1-5386-2358-9;
8 pages.
T. Ceglar, M. Schwab, H. E. Pettermann:
"DCB and ENF Multi-Scale Simulations";
Talk: 6th ECCOMAS Thematic Conference on the Mechanical Response of Composites: COMPOSITES 2017,
Eindhoven;
09-20-2017
- 09-22-2017; in: "6th ECCOMAS Thematic Conference on the Mechanical Response of Composites: COMPOSITES 2017",
J.J.C. Remmers, A. Turon (ed.);
TU EIndhoven,
(2017),
13
- 23.
M. Springer, A. Turon, H. E. Pettermann:
"A Cyclic Cohesive Zone Model for Variable Amplitude Loading and Mixed Mode Behavior";
Talk: 6th ECCOMAS Thematic Conference on the Mechanical Response of Composites: COMPOSITES 2017,
Eindhoven;
09-20-2017
- 09-22-2017; in: "6th ECCOMAS Thematic Conference on the Mechanical Response of Composites: COMPOSITES 2017",
J.J.C. Remmers, A. Turon (ed.);
TU Eindhoven,
(2017),
48
- 59.
H. E. Pettermann, A. De Simone:
"A Linear Thermo-Viscoelastic Orthotropic Constitutve Law - Application to Composites";
Talk: ECCM17 - 17th European Conference on Composite Materials,
München;
06-26-2016
- 06-30-2016; in: "ECCM17 - 17th European Conference on Composite Materials",
K. Drechsler (ed.);
European Society for Composite Materials,
(2016),
ISBN: 978-3-00-053387-7;
Paper ID TUE-1_BUD_3.05-1,
8 pages.
M. Schwab, H. E. Pettermann:
"Prediction of the Energy Absorption Behaviour of Large Composite Components Subjected to Impact Loads - Assessment of Individual Mechanisms at Ply Scale";
Talk: ECCM17 - 17th European Conference on Composite Materials,
München;
06-26-2016
- 06-30-2016; in: "ECCM17 - 17th European Conference on Composite Materials",
K. Drechsler (ed.);
European Society for Composite Materials,
(2016),
ISBN: 978-3-00-053387-7;
Paper ID TUE-2_BIA_3.11-22,
7 pages.
M. Springer, M. Nelhiebel, H. E. Pettermann:
"Combined Simulation of Fatigue Crack Nucleation and Propagation Based on a Damage Indicator";
Talk: ICMFF11, 11th International Conference on Multiaxial Fatigue and Fracture,
Sevilla;
06-01-2016
- 06-03-2016; in: "Proceedings of the 11th International Conference on Multiaxial Fatigue and Fracture",
ETSI, Universidad de Sevilla,
Sevilla
(2016),
Paper ID 00100-0098,
8 pages.
M. Springer, M. Nelhiebel, H. E. Pettermann:
"Fatigue Crack Growth Modeling in the Metallization of Power Semiconductors under Cyclic Thermo-Mechanical Loading";
Talk: 17th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE),
Montpellier;
04-17-2016
- 04-20-2016; in: "Proceedings of the 7th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE)",
IEEE,
CFP16566-USB
(2016),
ISBN: 978-1-5090-2120-8.
M. Schwab, M. Todt, H. E. Pettermann:
"A Multiscale Modelling Approach for Simulating Impact Damage in Woven Composite Laminates";
Talk: 5th ECCOMAS Thematic Conference on the Mechanical Response of Composites (COMPOSITES 2015),
Bristol;
09-07-2015
- 09-09-2015; in: "Proceedings of the 5th ECCOMAS Thematic Conference on the Mechanical Response of Composites",
S.R. Hallett, J.J.C. Remmers (ed.);
Bristol University,
(2015),
12 pages.
M. Schwab, M. Todt, H. E. Pettermann:
"Simulation of the Intermediate Velocity Impact Behavior of Woven Composite Laminate Applying Progressive Damage Models for Plies and Interfaces";
Talk: 20th International Conference on Composite Materials (ICCM-20),
Kopenhagen;
07-19-2015
- 07-24-2015; in: "Proceedings of the 20th International Conference on Composite Materials (ICCM-20)",
O.T. Thomsen, C. Berggreen, B.F. Sørensen (ed.);
(2015),
Paper ID 4417-4,
11 pages.
G. Kravchenko, H. E. Pettermann:
"A Cyclic Cohesive Zone Model for Transient Thermomechanical Loading";
Talk: 11th World Congress on Compuational Mechanics (WCCM XI),
Barcelona;
07-20-2014
- 07-25-2014; in: "Proceedings of the 11th World Congress on Compuational Mechanics",
E. Oñate, X. Oliver, A. Huerta (ed.);
CIMNE,
Barcelona
(2014),
ISBN: 978-84-942844-7-2;
1778
- 1789.
H. E. Pettermann, J. Broger, J. Gager:
"Nonlinear Predictions in Laminated Composites and Structures";
Talk: 11th World Congress on Compuational Mechanics (WCCM XI),
Barcelona;
07-20-2014
- 07-25-2014; in: "Proceedings of the 11th World Congress on Compuational Mechanics",
E. Oñate, X. Oliver, A. Huerta (ed.);
CIMNE,
Barcelona
(2014),
ISBN: 978-84-942844-7-2;
3727
- 3733.
M. Schwab, J. Gager, H. E. Pettermann:
"Assessing Material Nonlinearities in Large Composite Structures by Predicting Energy Dissipations at the Mesoscale";
Talk: 11th World Congress on Compuational Mechanics (WCCM XI),
Barcelona;
07-20-2014
- 07-25-2014; in: "Proceedings of the 11th World Congress on Compuational Mechanics",
E. Oñate, X. Oliver, A. Huerta (ed.);
CIMNE,
Barcelona
(2014),
ISBN: 978-84-942844-7-2;
3691
- 3702.
G. Kravchenko, B. Karunamurthy, H. E. Pettermann:
"FEM Study of Fatigue Crack Growth in a Power Semiconductor Chip Subjected to Transient Thermal Loading";
Talk: 20th European Conference on Fracture,
Trondheim;
06-30-2014
- 07-04-2014; in: "Proceedings of the ECF20",
Procedia Materials Science,
3
(2014),
ISSN: 2211-8128;
63
- 70.
M. Schwab, M. Todt, H. E. Pettermann:
"Simulation of Ply Damage and Delamination in Laminated Composites Under Impact Loading";
Talk: 8th Workshop on Dynamic Behaviour of Materials and its Applications in Industrial Processes,
Warschau;
06-25-2014
- 06-27-2014; in: "Dynamic Behaviour of Materials and its Applications in Industrial Processes",
(2014),
23
- 24.
J. Gager, H. E. Pettermann:
"Numerical Predictions of the Nonlinear Behavior of Bi-Axial Braidings";
Talk: 16th European Conference on Composite Materials (ECCM16),
Sevilla;
06-22-2014
- 06-26-2014; in: "Proceedings of the 16th European Conference on Composite Materials",
University of Seville,
Paper 0171
(2014),
1
- 10.
H. E. Pettermann, E. Rama Lista, J. Gager:
"Delamination Induced Ply Damage - Nonlinear Simulations Accounting for Degradation of Layer and Interface Properties Simultaneously";
Talk: Composites 2013,
San Miguel, Azores;
09-25-2013
- 09-27-2013; in: "COMPOSITES 2013",
A. Suleman, P.P. Camanho (ed.);
IDMEC,
Lisboa
(2013),
Paper ID 31,
9 pages.
J. Gager, M. Meindlhumer, M. Schwab, H. E. Pettermann:
"Numerically Predicted Damage and Failure Envelopes of Composites Featuring Nonlinear Material Behavior";
Talk: 19th International Conference on Composite Materials,
Montréal;
07-28-2013
- 08-02-2013; in: "Proceedings of the 19th International Conference on Composite Materials",
S.V. Hoa, P. Hubert (ed.);
Byte Press,
Toronto, ON
(2013),
9 pages.
G. Kravchenko, B. Karunamurthy, M. Nelhiebel, H. E. Pettermann:
"Finite Element Analysis of Fatigue cracks Formation in Power Metallization of a Semiconductor Device Subjected to Active Cycling";
Talk: 14th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems,
Wroclaw;
04-15-2013
- 04-17-2013; in: "Proceedings of the 14th Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems",
IEEE, Piscataway, NJ,
(2013),
ISBN: 978-1-4673-6137-8;
Paper ID 91,
6 pages.
H. E. Pettermann, J. Gager, A. Kholkin, M. Fleischmann, M. Wolfahrt, G. Pinter:
"Simulations and Experiments of Three Point Bending Laminates with Ply Failure and Delamination";
Talk: DFC12/SI6 Designing Composite Materials: Avoiding Large Structural Failures,
Cambridge;
04-08-2013
- 04-11-2013; in: "Deformation and Fracture of Composites (DFC-12) & Structural Integrity and Multi-scale Modelling (SI-6)",
University of Sheffield,
(2013),
Paper ID S13T2,
2 pages.
J. Gager, H. E. Pettermann:
"Multi-Layered Textile Composites - A Shell Element Based Homogenization Approach";
Talk: ECCOMAS 2012 (European Congress on Computational Methods in Applied Sciences and Engineering,
Wien (invited);
09-10-2012
- 09-14-2012; in: "CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)",
J. Eberhardsteiner, H. J. Böhm, F. G. Rammerstorfer (ed.);
TU Wien,
Wien
(2012),
ISBN: 978-3-9502481-9-7;
Paper ID 4753,
12 pages.
H. E. Pettermann, J. Gager, E. Rama Lista, T. Flatscher:
"Elasto-Plasto-Damage Modeling of Laminated Composites";
Talk: ECCOMAS 2012 (European Congress on Computational Methods in Applied Sciences and Engineering,
Wien (invited);
09-10-2012
- 09-14-2012; in: "CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)",
J. Eberhardsteiner, H. J. Böhm, F. G. Rammerstorfer (ed.);
TU Wien,
Wien
(2012),
ISBN: 978-3-9502481-9-7;
Paper ID 3717,
7 pages.
J. Gager, H. E. Pettermann:
"Assessing the Operation Load Range of Non-Linear Textile Composites by Means of Stress Envelopes";
Talk: 15th European Conference on Composite Materials (ECCM 15),
Venedig;
06-24-2012
- 06-28-2012; in: "Proceedings of the 15th European Conference on Composite Materials",
ECCM15,
(2012),
ISBN: 978-88-88785-33-2;
Paper ID 1837,
8 pages.
M. Wolfahrt, J. Cichosz, J. Gager, R.T. Hinterhölzl, H. E. Pettermann, S. Frieß, G. Pinter, J. Noisternig:
"Werkstoffcharakterisierung, Materialmodellierung und Simulation von CFK-Geflechtlaminaten";
Talk: 20. Leobner Kunststoffkolloquium Polymerer Leichtbau,
Leoben;
11-10-2011
- 11-11-2011; in: "20. Leobner Kunststoff-Kolloquium",
Montanuniversität Leoben,
(2011),
101
- 110.
J. Gager, T. Flatscher, H. E. Pettermann:
"Elasto-Plasto-Damage Modeling of FRP Fabrics - A Shell Unit Cell Approach";
Talk: 3rd ECCOMAS Thematic Conference on the Mechanical Response of Composites,
Hannover;
09-21-2011
- 09-23-2011; in: "Proceedings of the 3rd ECCOMAS Thematic Conference on the Mechanical Response of Composites",
R. Rolfes, E. Jansen (ed.);
Leibniz Univerisität Hannover,
Hannover
(2011),
ISBN: 978-3-00-035855-5;
279
- 286.
T. Flatscher, H. E. Pettermann:
"A Constitutive Model for Unidirectional Plies: Implementation and Application in Finite Element Analysis";
Talk: 10th International Conference on Computational Structures Theory (CST 2010),
Valencia;
09-14-2010
- 09-17-2010; in: "The Tenth International Conference on Computational Structures Technology",
B.H.V. Topping, J.M. Adam, F.J. Pallarés, R. Bru, M.L. Romero (ed.);
(2010),
ISBN: 978-1-905088-37-9;
Paper ID 70,
10 pages.
J. Gager, B. Karunamurthy, M. Nelhiebel, H. E. Pettermann:
"Finite Element Based Simulations of Interface Cracks in Semiconductor Devices - A Study on Geometry Parameters and Delamination Configurations";
Talk: 18th European Conference on Fracture,
Dresden;
08-30-2010
- 09-03-2010; in: "Fracture of Materials and Structures form Micro to Macro Scales",
ESIS,
(2010),
Paper ID 233,
8 pages.
H. E. Pettermann, C.O. Huber, M.H. Luxner, S. Nogales, H. J. Böhm:
"An Incremental Mori-Tanaka Approach for Finite Strain Elastoplasticity of Particulate MMCs";
Talk: Plasticity '10: The Sixteenth International Symposium on Plasticity and its Current Applications,
St. Kitts;
01-03-2010
- 01-08-2010; in: "Proceedings of Plasticity '10",
A.S. Khan, B. Farrokh (ed.);
NEAT Press, Fulton, MD,
(2010),
ISBN: 0-9659463-2-0;
133
- 135.
G. Wimmer, M. Roldán Galán, H. E. Pettermann:
"A Semi-Analytical Approach for the Simulation of Delamination Growth under Quasi-Static and Cyclic Loading";
Talk: ECCM 13 - 13th European Conference on Composite Materials,
Stockholm;
06-02-2008
- 06-05-2008; in: "Proc. ECCM 13",
(2008),
Paper ID 528,
10 pages.
C. Schuecker, H. E. Pettermann:
"Combining Progressive Damage with Plasticity to Model the Non-linear Behavior of Fiber Reinforced Laminates";
Talk: ECCOMAS Composites 2007,
Porto;
09-12-2007
- 09-14-2007; in: "ECCOMAS Thematic Conference Mechanical Response of Composites",
P.P. Camanho, C.G. Dávila, S.T. Pinho, J.J.C. Remmers (ed.);
ECCOMAS,
Universidade do Porto
(2007),
Paper ID 41,
14 pages.
G. Wimmer, H. E. Pettermann:
"Simulation of Delamination in Laminate Composite Components - A Fracture Mechanics Based Method";
Talk: ECCOMAS Composites 2007,
Porto;
09-12-2007
- 09-14-2007; in: "ECCOMAS Thematic Conference Mechanical Response of Composites",
P.P. Camanho, C.G. Dávila, S.T. Pinho, J.J.C. Remmers (ed.);
ECCOMAS,
Universidade do Porto
(2007),
Paper ID 32,
13 pages.
C.O. Huber, M.H. Luxner, S. Kremmer, S. Nogales, H. J. Böhm, H. E. Pettermann:
"Forming Simulations of MMC Components by a Micromechanics Based Hierarchical FEM Approach";
Talk: NUMIFORM 07,
Porto;
06-17-2007
- 06-21-2007; in: "Numiform 07 - Materials Processing and Design: Modeling, Simulation and Applications",
J.M.A.C. de Sá, A.D. Santos (ed.);
American Institute of Physics,
(2007),
ISBN: 978-0-7354-0416-8;
Paper ID 1351,
6 pages.
J. Stampfl, M. Schuster, R. Inführ, R. Liska, M.H. Luxner, H. E. Pettermann, F. Varga, C. Turecek:
"Rapid Prototyping als Fertigungswerkzeug zur Herstellung zellularer Strukturen";
Talk: 52. Metallkunde Kolloquium,
Lech am Arlberg;
04-19-2006
- 04-21-2006; in: "52. Metallkunde-Kolloquium: Werkstoffforschung für Wirtschaft und Gesellschaft",
(2006),
#.
C.O. Huber, S. Kremmer, H. E. Pettermann:
"Finite Element Simulation of Metal Matrix Composites - Effective Coefficients of Friction and Temperature Fields under Frictional Loading";
Talk: World Tribology Congress III,
Washington, DC;
09-12-2005
- 09-16-2005; in: "Proceedings WTC2005 World Tribology Congress III",
R.S. Cowan, J. Tichy, S. Gunsel, J. Knight (ed.);
ASME,
New York, NY
(2005),
ISBN: 0-7918-3767-x;
Paper ID WTC2005-63272;,
2 pages.
J. Stampfl, M.H. Luxner, H. E. Pettermann, A. Woesz, P. Fratzl:
"Rapid Prototyping and Modelling of cellular solids";
Talk: Euromat 2005,
Prag;
09-05-2005
- 09-08-2005; in: "Euromat 2005 European Congress on Advanced Materials and Processes",
DGM,
http://www.dgm.de/past/2005/euromat2005/programme/
(2005),
Paper ID C12-614,
1 pages.
C. Schuecker, H. E. Pettermann:
"A Mechanism Based Damage Meso-Model for Fiber Reinforced Laminates";
Talk: Fifteenth Internacional Conference on Composite Materials (ICCM-15),
Durban;
06-27-2005
- 07-01-2005; in: "Fifteenth International Conference on Composite Materials - Extended Abstracts",
V.E. Verijenko, S. Adali, E. Morosov, C.J. von Klemperer (ed.);
(2005),
245
- 246.
D. Duschlbauer, H. J. Böhm, H. E. Pettermann:
"Short Fiber Metal Matrix Composites under Temperature Load - Local Stresses and Global Deformations";
Talk: Sixth International Congress on Thermal Stresses,
Wien;
05-26-2005
- 05-29-2005; in: "Thermal Strress 2005: Proceedings of the Sixth International Congress on Thermal Stresses",
F. Ziegler, R. Heuer, C. Adam (ed.);
(2005),
ISBN: 3-901167-12-9;
759
- 762.
M.H. Luxner, J. Stampfl, H. E. Pettermann:
"Linear and Nonlinear Numerical Investigations of Regular Open Cell Structures";
Talk: 2004 ASME International Mechanical Engineering Congress and RD&D Expo,
Anaheim, CA;
11-13-2004
- 11-20-2004; in: "Proceedings of the 2004 ASME International Mechanical Engineering Conference",
ASME, New York,
(2004),
ISBN: 0-7918-4180-4;
Paper ID IMECE2004-62545.
D. Duschlbauer, H. J. Böhm, H. E. Pettermann:
"Composites with planar random fiber arrangements";
Talk: XXI International Congress of Theoretical and Applied Mechanics,
Warschau;
08-15-2004
- 08-21-2004; in: "Proceedings of the XXI International Congress of Theorectical and Applied Mechanics",
W. Gutkowski, T.A. Kowalewski (ed.);
IPPT PAN,
Warschau
(2004),
ISBN: 83-89687-01-1;
Paper ID SM13_12321,
2 pages.
D. H. Pahr, C. Schuecker, F. G. Rammerstorfer, H. E. Pettermann:
"Investigations of Perforated Laminates in the Presence of Residual Stress";
Talk: 11th European Conference on Composite Materials,
Rhodos;
05-31-2004
- 06-03-2004; in: "ECCM11 Book of Abstracts",
C. Galiotis (ed.);
Vol.1
(2004),
352
- 353.
A. F. Plankensteiner, D. Duschlbauer, O. Coube, H. E. Pettermann, H. J. Böhm:
"Numerical and Experimental Analysis of Pore Shape Evolution of Sintered Molybdenum under Triaxial Loading Condition";
Talk: Pm Tec 2003,
Las Vegas, NV;
07-08-2003
- 07-12-2003; in: "Advances in Powder Metallurgy and Particulate Metals - 2003",
MPIF, Princeton, NJ,
(2003),
ISBN: 1-878954-96-2;
108
- 119.
Talks and Poster Presentations (without Proceedings-Entry)
M. Schasching, R. Duy, T. Ceglar, M. Todt, H. E. Pettermann:
"Simulation of The Wrinkling of Thin Hyperelastic Composite Strips under Global Tensile Loading";
Talk: 8th ECCOMAS Thematic Conference on the Mechanical Response of Composites,
Göteborg;
09-22-2021
- 09-24-2021.
M. Todt, R.W. Tomas, T. Koch, H. E. Pettermann:
"Numerical Study of yhe Creep Buckling Response of Laminated Orthotropic Linear Viscoelastic Cylindrical Shells";
Talk: 8th ECCOMAS Thematic Conference on the Mechanical Response of Composites,
Göteborg;
09-22-2021
- 09-24-2021.
M. Todt, R.W. Tomas, T. Koch, H. E. Pettermann:
"Simulation of the Mechanical Response of Composite Components Under Consideration of Their Orthotropic Viscoelastic Material Behavior";
Talk: 14th World Congress on Computational Mechanics (WCCM 2020, Paris),
Paris;
01-11-2021
- 01-15-2021.
H. E. Pettermann:
"Modeling and Simulation of Composite Materials and Components";
Talk: SSD Seminar Series WS 2019/2020, School for Simulation and Data Science, RWTH Aachen,
Aachen (invited);
02-13-2020.
J. Kaul, H. E. Pettermann:
"Modellierung und Simulation von Plastizität und Schädigung in Faserverbundlaminaten";
Poster: CU-Forum "CARBON COMPOSITES AUSTRIA" 2019,
Spielberg;
11-12-2019.
M. Todt, R.W. Tomas, T. Koch, H. E. Pettermann:
"Numerische Vorhersage der linear viskoelastischen Materialeigenschaften von Faserverbundlaminaten";
Talk: CU-Forum "CARBON COMPOSITES AUSTRIA" 2019,
Spielberg;
11-12-2019.
H. E. Pettermann:
"Non-linear modeling and simulation of the performance of composite structures --- impact on fabric ply laminates";
Talk: CCeV-Thementag "Ermüdung und strukturelle Integrität von Composties",
St. Valentin (invited);
04-04-2019.
T. Ceglar, H. E. Pettermann:
"Finite element simulations and nonlinear homogenization of fibre reinforced elastomer composite";
Talk: 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019),
Vienna;
02-18-2019
- 02-22-2019.
P. Hoffmann, M. Springer, M. Todt, B. Karunamurthy, M. Nelhiebel, H. E. Pettermann:
"Simulation of fatigue damage in power semiconductors subjected to transient thermo-mechanical loading";
Talk: 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019),
Vienna;
02-18-2019
- 02-22-2019.
J. Kaul, H. E. Pettermann:
"A constitutive model for fiber reinforced polymer plies - transition from hardening to softening behavior during anisotropic damage evolution";
Talk: 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019),
Vienna;
02-18-2019
- 02-22-2019.
R.W. Tomas, M. Todt, T. Koch, H. E. Pettermann:
"Numerical prediction of the homogenized orthotropic linear viscoelastic material properties of composite plies and laminated composites";
Talk: 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019),
Vienna;
02-18-2019
- 02-22-2019.
B. Werner, M. Todt, H. E. Pettermann:
"Nonlinear finite element study of beams with elasto-plastic damage behavior in the post-buckling regime";
Talk: 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019),
Vienna;
02-18-2019
- 02-22-2019.
M. Schwab, M. Todt, J Tauchner, H. E. Pettermann:
"FEM simulations of high velocity impact discerning various ply and interface damage mechanisms";
Talk: International Conference on Composite Structures ICCS21,
Bologna, Italy;
09-04-2018
- 09-07-2018.
T. Ceglar, H. E. Pettermann:
"Finite Element Simulations and Nonlinear Homogenization of Hyperelastic Fibre Reinforced Elastomer Composites";
Talk: 10th European Solid Mechanics Conference, Bologna,
Bologna;
07-02-2018
- 07-06-2018.
T. Ceglar, M. Schwab, A. Wagner, H. E. Pettermann:
"Nonlinear Multi-Scale Simulations of Fabric Laminate Components";
Talk: ECCOMAS Thematic Conference on Computational Modeling of Complex Materials Across the Scales,
Paris;
11-07-2017
- 11-09-2017.
M.M. Schasching, M. Todt, M. Humer, P. Hoffmann, M. Schwab, H. E. Pettermann:
"Simulating Ply Damage and Delamination in Laminated Composites - An Extended Shell-Based Ply-Level Approach";
Talk: 20th International Conference on Composite Structures (ICCS20),
Paris;
09-04-2017
- 09-07-2017.
J. Kaul, B. Dohnál, H. E. Pettermann:
"A Constitutive Law for Modeling Elasto-Plasto-Damage Mechanisms in UD-Plies: Damage Evolution under Multiaxial Strain States";
Talk: CFRAC 2017 - Fifth International Conference on Computational Modeling of Fracture and Failure of Materials and Structures,
Nantes;
06-14-2017
- 06-16-2017.
H. E. Pettermann:
"Modellierung und Simulation von Schädigung und Versagen von Faserverbund-Bauteilen";
Talk: PCCL Symposium Juni 2017,
Leoben (invited);
06-01-2017
- 06-02-2017.
M. Todt, M. Schwab, M. Humer, F. G. Rammerstorfer, H. E. Pettermann:
"Accounting for Transverse Shear in Shell-Based Ply-Level Models of Layered Composites";
Talk: 88th Annual Meeting of GAMM,
Ilmenau/Weimar, Germany;
03-06-2017
- 03-10-2017.
M. Todt, M. Schwab, M. Humer, F. G. Rammerstorfer, H. E. Pettermann:
"Shell-Based Ply-Level Models of Layered Composites";
Poster: 88th Annual Meeting of GAMM,
Ilmenau/Weimar, Germany;
03-06-2017
- 03-10-2017.
M. Springer, H. E. Pettermann:
"Fatigue Damage Modeling of Power Semiconductor Devices";
Talk: Vortragsreihe der Arbeitsgruppe AMADE, Universitat de Girona,
Girona (invited);
09-22-2016.
M. Schwab, H. E. Pettermann:
"Modelling Laminated Fabric Composites under Impact Loads";
Talk: 24th International Congress of Theoretical and Applied Mechanics,
Monreal, PQ;
08-21-2016
- 08-26-2016.
M. Schwab, A. Grabos, H. E. Pettermann:
"Nonlinear FEM Simulations of a Laminated Textile Composite Component - A Multi Scale Embedding Approach";
Talk: mechcomp 2016 - 2nd International Conference on Mechanics of Compositesmechcomp 2016,
Porto;
07-11-2016
- 07-14-2016.
M. Springer, H. E. Pettermann, M. Nelhiebel, B. Karunamurthy:
"FEM - Fatigue Modeling Approach for Damage Propagation and Lifetime Estimation";
Poster: Campeon Innovation Week 2015,
München;
11-09-2015
- 11-13-2015.
H. E. Pettermann:
"Linear Thermo-Viscoelastic Orthotropic Plane Stress Constitutive Law in the Time Domain";
Talk: SISSA MathLab Seminar,
Triest;
09-24-2015.
M. Todt, M. Schwab, H. E. Pettermann:
"Accounting for Transverse Shear in Stacked-Shell Models of Layered Composite Structures";
Talk: 9th European Solid Mecahnics Conference (ESMC 2015),
Madrid;
07-06-2015
- 07-10-2015.
M. Springer, M. Schwab, H. E. Pettermann:
"Simulation of Ply Damage and Delamination in Multilayer Composites to Predict the Residual Compressive Strength after Impact Loading";
Talk: IV International Conference on Computational Modeling of Fracture and Failure of Materials and Structure (CFRAC 2015),
Cachan;
06-03-2015
- 06-05-2015.
M. Springer, H. E. Pettermann, M. Nelhiebel, B. Karunamurthy:
"Damage Mechanics for Reliability: FEM-Predictions of Material Degradation in Cu Power Metallization";
Poster: Infineon Innovation Days 2015,
Villach;
05-05-2015.
G. Wimmer, H. E. Pettermann, P. Oberhuber:
"A Numerically Efficient Approach for Cooling Stack Design using Orthotropic Shell Elements with Homogenized Effective Properties";
Talk: SIMULIA Austria Regional User's Meeting 2014,
Graz;
11-10-2014
- 11-11-2014.
H. E. Pettermann, J. Gager, M. Meindlhumer, M. Schwab:
"Damage Evolution Predictions in Large Laminated Composite Structures";
Keynote Lecture: CFRAC 2013 - Third International Conference on Modeling of Fracture and Failure of Materials and Structures,
Prag (invited);
06-05-2013
- 06-07-2013.
H. E. Pettermann, J. Gager, T. Flatscher, E. Rama Lista:
"The Mechanical Performance of Laminated Structures - A Simulation Concept Integrating Ply and Interface Non-Linearities";
Talk: Faser-Verbund-Werkstoff - Simulationstag beim CCeV,
Augsburg;
10-25-2012.
G. Kravchenko, H. E. Pettermann:
"Submodelling-based analysis of thermally induced stresses in power metallization of a MOSFET device subjected to active cycling";
Talk: 1st Infineon Simulation Symposium - Advances in Thermomechanical and Thermoelectrical Simulation,
Neubiberg;
10-24-2012.
J. Gager, J. Cichosz, M. Wolfahrt, R.T. Hinterhölzl, H. E. Pettermann, M. Fleischmann, M. Schubert:
"Materialmodellierung von kohlenstofffaserverstärkten Geflechtlaminaten";
Talk: PCCL Symposium Oktober 2012 "10 Jahre PCCL",
Leoben;
10-04-2012
- 10-05-2012.
J. Gager, H. E. Pettermann:
"Shell Element Based Homogenization of Textile Composites";
Talk: 8th European Solid Mechanics Conference (ESMC 2012),
Graz;
07-09-2012
- 07-13-2012.
G. Kravchenko, H. E. Pettermann, B. Karunamurthy, M. Nelhiebel, S. Wöhlert:
"Numerical Simulation of Crack Problems in Semiconductor Devices";
Poster: Infineon Innovation Day 2012,
Villach;
07-05-2012.
G. Wimmer, H. E. Pettermann:
"Computational Methods for the Prediction of Emergence and Growth of Delaminations in Laminated Composite Components";
Talk: IUTAM 2012 Symposium on Fracture Phenomena in Nature and Technology,
Brescia;
07-01-2012
- 07-05-2012.
J. Gager, H. E. Pettermann:
"The Mechanical Performance of Laminated Structures - A Simulation Concept Integrating Ply and Interface";
Talk: FACC Technical Colloquium "Advances in Composites",
Salzburg;
06-05-2012
- 06-06-2012.
J. Gager, J. Cichosz, M. Wolfahrt, H. E. Pettermann, R.T. Hinterhölzl, G. Pinter, J. Noisternig:
"Werkstoffcharakterisierung, Materialmodellierung und Simulation am Beispiel von kohlenstofffaserverstärkten Geflechtlaminaten";
Talk: PCCL Symposium Mai 2012,
Leoben;
05-19-2012
- 05-20-2012.
J. Gager, H. E. Pettermann:
"FEM Homogenization of Textile Composites Based on Shell Element Discretization";
Talk: ICCS16, 16th International Conference on Composite Structures,
Porto;
06-28-2011
- 06-30-2011.
T. Flatscher, H. E. Pettermann:
"A Constitutive Ply Model for Non-Linear Implicit FEM Analyses of Laminated Composite Structures";
Talk: Sixth M.I.T. Conference on Computational Fluid and Solid Mechanics,
Cambridge, MA;
06-15-2011
- 06-17-2011.
T. Flatscher, J. Gager, H. E. Pettermann:
"Constitutive Ply Modeling of Plasticity, Brittle Damage, and Softening Applied to Failure Analyses of Laminated Composite Structures";
Keynote Lecture: CFRAC 2011 - International Conference on Computational Modeling of Fracture and Failure of Materials and Structures,
Barcelona;
06-06-2011
- 06-08-2011.
H. E. Pettermann:
"Elasto-Plastic-Damage Modeling of Laminated Composites";
Talk: Seminar of the Structural Mechanics and Concepts Branch, NASA Langley Research Center,
Hampton, VA (invited);
05-16-2011.
H. E. Pettermann, M.H. Luxner, J. Hüsing, C. Gaßner:
"Modeling and Simulation of Relaxation and Damping in Viscoplastic Open Cell Materials and Structures";
Talk: IUTAM Symposium: Mechanics of Liquid and Solid Foams,
Austin, TX (invited);
05-08-2011
- 05-13-2011.
T. Flatscher, M. Wolfahrt, G. Pinter, H. E. Pettermann:
"Simulations and Experiments of Laminated Open Hole Tension Tests - Assessment of Intraply Plasticity, Damage, and Localization";
Talk: Dfc-11 & Si-5,
Cambridge, UK;
04-12-2011
- 04-15-2011.
H. E. Pettermann:
"Verbundwerkstoffe: Von der Materialmodellierung zur Bauteilberechnung";
Talk: innovmat,
Wien;
04-05-2011.
J. Gager, H. E. Pettermann:
"Numerical Simulation of Damage Triggered Delamination in Composite Structures";
Poster: Aerodays 2011,
Madrid;
03-30-2011
- 04-01-2011.
H. E. Pettermann, C.O. Huber, M.H. Luxner, S. Nogales, H. J. Böhm:
"Multiskalenmodellierung von MMC-Komponenten unter großen Verzerrungen";
Talk: Werkstoffkongress 2010,
Leoben (invited);
11-04-2010
- 11-05-2010.
H. E. Pettermann, M.H. Luxner, J. Stampfl:
"Architecture-Property Correlation of Open Cell Materials by Nonlinear FEM Simulations";
Talk: EUROMAT 2009,
Glasgow (invited);
09-07-2009
- 09-10-2009.
H. E. Pettermann, C.O. Huber, M.H. Luxner, S. Nogales, H. J. Böhm:
"MMC Parts under Finite Elastoplasticity - Mean Field and Unit Cell Simulations";
Talk: 3. GAMM-Seminar on Multiscale Material Modelling,
Karlsruhe;
06-26-2009
- 06-27-2009.
S. Nogales, D. Duschlbauer, H. E. Pettermann, H. J. Böhm:
"Analytical and Numerical Modelling of Composites Containing Reinforcements with Finite Interfacial Conductances";
Talk: 5th International Conference on Diffusion in Solids and Liquids (DSL 2009),
Rom (invited);
06-24-2009
- 06-26-2009.
T. Flatscher, H. E. Pettermann:
"Plasticity, Damage, and Failure Predictions in Laminated Composites";
Talk: 15th International Conference on Composite Structures (ICCCS15),
Porto;
06-15-2009
- 06-17-2009.
G. Wimmer, H. E. Pettermann:
"Numerical Simulation of Progressive Growth of Delaminations with Curved Fronts";
Talk: Composites 2009,
London;
04-01-2009
- 04-03-2009.
T. Flatscher, C. Schuecker, H. E. Pettermann:
"A Constitutive Model for Continuous Fiber Reinforced Polymer Plies";
Talk: 80th Annual Meeting of the GAMM,
Gdansk;
02-09-2009
- 02-13-2009.
H. E. Pettermann:
"Modellierung und Simulation von Verbundwerkstoffen und Bauteilen";
Talk: Zukunft der Faserverbundwerkstoffe in der österreichischen Luftfahrtindustrie und -forschung,
Wien;
12-01-2008.
H. E. Pettermann, D. García Vallejo, J. Stampfl, M.H. Luxner, J. Domínguez:
"Viskoelastische Eigenschaften von zellulären Strukturen";
Talk: 3. Wiener Biomaterialsymposium,
Wien;
11-19-2008
- 11-21-2008.
H. E. Pettermann, D. García Vallejo, J. Stampfl, M.H. Luxner, J. Domínguez:
"Viscoelastic Properties of Open Cell Kelvin Foams";
Talk: Ictam 2008,
Adelaide;
08-24-2008
- 08-29-2008.
T. Flatscher, C. Schuecker, H. E. Pettermann:
"An Elasto-Plasto-Damage Constitutive Ply Model for FEM-Analyses of Laminated Composite Structures";
Talk: 8th World Congress on Computational Mechanics (WCCM8) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008),
Lido di Venezia;
06-30-2008
- 07-04-2008.
H. E. Pettermann, S. Nogales, C.O. Huber, M.H. Luxner, H. J. Böhm:
"Micromechanics Based Structural Analysis of MMC Components under Finite Strains";
Talk: 8th World Congress on Computational Mechanics (WCCM8) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008),
Lido di Venezia;
06-30-2008
- 07-04-2008.
H. E. Pettermann:
"Modeling and Simulation of Open Cell Structures";
Talk: Seminar des Max-Planck-Institute for Colloid and Interface Research,
Potsdam (invited);
06-06-2008.
H. E. Pettermann:
"Theorie und Anwendung von nichtlinearen Konstitutivgesetzen für Verbundwerkstoffe im Rahmen von FEM-Strukturanalyse";
Talk: NAFEMS Seminar "Simulation von Verbunden: Material und Strukturen",
Bad Kissingen;
11-06-2007
- 11-07-2007.
M.H. Luxner, H. E. Pettermann:
"Modeling and Simulation of Highly Porous Open Cell Structures - Elasto-Plasticity and Localization versus Disorder and Defects";
Talk: IUTAM Symposium on Mechanical Properties of Cellular Materials,
Paris;
09-17-2007
- 09-21-2007.
H. E. Pettermann:
"Numerical Simulation of Damage Processes in Composite Aircraft Components";
Talk: 4th FACC Technical Colloquium,
Salzburg (invited);
06-21-2007.
M.H. Luxner, J. Stampfl, H. E. Pettermann:
"Disordered Open Cell Structures: Elasto-Plastic Behavior and Defect Sensitivity";
Talk: McMAT 2007 - ASME Applied Mechanics and Materials Conference,
Austin, TX;
06-03-2007
- 06-07-2007.
G. Wimmer, C. Schuecker, H. E. Pettermann:
"Delamination Growth in a Laminated Composite Component, A Fracture Mechanics Based Method";
Talk: Deformation and Fracture of Composites Conference (DFC9),
Sheffield, UK (invited);
04-11-2007
- 04-13-2007.
H. E. Pettermann:
"Modeling and Simulation of Open Cell Biomimetic Structures";
Talk: DIMM Seminar,
ETS, Universidad de Sevilla;
03-27-2007.
H. J. Böhm, S. Nogales, H. E. Pettermann:
"Comparisons of Mori-Tanaka and Unit Cell Predictions for the Thermoelastic and Thermal Conduction Behavior of Discontinuously Reinforced Composites";
Talk: 19th International Workshop "Research in Mechanics of Composites",
Bad Herrenalb;
11-26-2006
- 11-29-2006.
H. E. Pettermann, M.H. Luxner, A. Woesz, P. Fratzl, J. Stampfl:
"Modellierung und Simulation offenzelliger biomimetischer Strukturen - Elasto-Plastizität und Kollaps versus Unordnung und Defekte";
Talk: 2. Wiener Biomaterialsymposium,
Wien;
11-22-2006
- 11-24-2006.
G. Wimmer, C. Schuecker, H. E. Pettermann:
"Numerical Simulation of Onset and Growth of Delamination in Laminated Composites";
Talk: Conference on Damage in Composite Materials 2006 (CDCM2006),
Stuttgart;
09-18-2006
- 09-19-2006.
H. E. Pettermann, C.O. Huber, M.H. Luxner, S. Nogales, H. J. Böhm:
"Finite Elastic-Plastic Deformations of MMC Components - Multiscale Mean Field and Unit Cell Simulations";
Talk: 35th Solid Mechanics Conference,
Krakau;
09-04-2006
- 09-08-2006.
C.O. Huber, S. Kremmer, A. Merstallinger, H. E. Pettermann:
"Numerical Simulation of Composites - Thermoelastic Friction Analysis and Its Limitation Due to Thermoelastic Instability";
Talk: 6th European Solid Mechanics Conference,
Budapest;
08-28-2006
- 09-01-2006.
H. J. Böhm, S. Nogales, D. Duschlbauer, H. E. Pettermann:
"Numerically Based Modeling of Thermal Conduction in Discontinuosly Reinforced Composites";
Talk: 7th World Congress on Computational Mechanics (WCCM-7),
Los Angeles, CA;
07-16-2006
- 07-22-2006.
G. Wimmer, C. Schuecker, H. E. Pettermann:
"Numerical Simulation of the Damage Process of Fiber Reinforced Aircraft Components";
Poster: Aeronautics Days 2006,
Wien;
06-19-2006
- 06-21-2006.
M.H. Luxner, J. Stampfl, A. Woesz, P. Fratzl, H. E. Pettermann:
"Influence of Defects and Perturbations on the Performance of 3D Open Cell Structures";
Talk: 3rd European Conference on Computational Mechanics (ECCM 2006),
Lissabon;
06-05-2006
- 06-09-2006.
C. Schuecker, H. E. Pettermann:
"Constitutive Ply Damage Modeling, FEM Implementation, and Analysis of Laminated Structures";
Talk: 3rd European Conference on Computational Mechanics (ECCM 2006),
Lissabon;
06-05-2006
- 06-09-2006.
H. E. Pettermann:
"Continuum Micromechanics of Heterogeneous Materials";
Talk: 3rd Arctic-Mediterranean Post Graduate Workshop on Intelligent Machines and Transport Systems,
Sevilla;
11-13-2005
- 11-20-2005.
H. E. Pettermann:
"Continuum Mechanics Modelling of Composite Materials";
Talk: Seminar der Kroatischen Gesellschaft für Mechanik,
Zagreb (invited);
10-20-2005.
M.H. Luxner, J. Stampfl, H. E. Pettermann:
"Nichtlineare Simulation dreidimensionaler offenzelliger Strukturen mit regelmäßigen und gestörten Geometrien";
Talk: Workshop Simulation von Schaumstoffen mit stark nichtlinearem Verhalten,
Hohenwart, Deutschland;
09-15-2005
- 09-16-2005.
H. J. Böhm, T. Drabek, D. Duschlbauer, A. Eckschlager, W. Han, C.O. Huber, H. E. Pettermann:
"Unit Cell and Mean Field Models of Continuously Reinforced Composites";
Keynote Lecture: Micromechanics and Microstructure Evolution: Modeling Simulation and Experiments,
Madrid (invited);
09-12-2005
- 09-16-2005.
M.H. Luxner, J. Stampfl, H. E. Pettermann:
"Nonlinear Behavior of Regular and Irregular Open Cell Structures";
Talk: Euromech Colloquium 466 "Computational and Experimental Mechanics of Advanced Materials",
Loughborough;
07-20-2005
- 07-22-2005.
M.H. Luxner, J. Stampfl, H. E. Pettermann:
"Nonlinear Behavior of 3D Regular and Irregular Open Cell Structures";
Talk: Third M.I.T. Conference on Computational Fluid and Solid Mechanics,
Cambridge, MA (invited);
06-14-2005
- 06-17-2005.
H. E. Pettermann:
"Modeling and Simulation of Failure and Progressive Damage in Laminated Composites";
Talk: MATELCOMP Minisymposium and Final Workshop,
Leoben (invited);
04-18-2005
- 04-19-2005.
C. Schuecker, H. E. Pettermann:
"Failure Prediction of Layered Fiber Reinforced Composites in the Presence of Residual Stresses";
Poster: Einsteins in the City,
New York, NY;
04-11-2005
- 04-12-2005.
H. E. Pettermann, C. Schuecker, D. H. Pahr, F. G. Rammerstorfer:
"Modeling and Simulation of Aircraft Structures - Stiffness, Damage, and Failure Prediction for Laminated Composites";
Talk: 4th FENet Annual Industry Meeting,
Lissabon;
12-02-2004
- 12-03-2004.
M.H. Luxner, H. E. Pettermann:
"Linear and Nonlinear Simulations of Highly Porous Materials";
Talk: Euromech Colloquium 459 "Mechanical Behavior of Cellular Solids",
Nancy (invited);
06-07-2004
- 06-10-2004.
C. Schuecker, D. H. Pahr, H. E. Pettermann:
"Numerical Simulation of Composite Structures - First Ply Failure under Non-Proportional Loading";
Talk: 6th International Conference for Mesomechanics,
Patras;
05-31-2004
- 06-04-2004.
D. Duschlbauer, H. E. Pettermann:
"Numerical Simulation of Composite Materials by Multi-Fiber Unit Cells";
Talk: 21st CAD-FEM User's Meeting,
Potsdam;
11-12-2003
- 11-14-2003.
H. E. Pettermann:
"Modeling of Cellular Solids";
Talk: Kolloquium des Max-Planck-Instituts für Kolloid- und Grenzflächenforschung,
Potsdam (invited);
11-11-2003.
H. E. Pettermann:
"Kontinuumsmechanische Modellierung von Verbundwerkstoffen";
Talk: Habilitationsvortrag,
Wien;
10-17-2003.
H. E. Pettermann, C. Schuecker, D. H. Pahr:
"Simulation und Modellierung mechanischer Eigenschaften von Laminaten";
Talk: Wissenschaftliches Evaluierungsseminar des Austrian Aeronautics Research Network,
Wien;
10-13-2003.
H. J. Böhm, J. Segurado, D. Duschlbauer, H. E. Pettermann, A. F. Plankensteiner:
"Modeling of the Densification of Porous Molybdenum by a Unit Cell Approach";
Talk: 5th Euromech Solid Mechanics Conference ESMC-5,
Thessaloniki;
08-17-2003
- 08-22-2003.
C. Schuecker, D. H. Pahr, H. E. Pettermann:
"Numerical Simulation of Failure in Layered Fiber Reinforced Composites in the Presence of Residual Stresses";
Talk: 5th Euromech Solid Mechanics Conference ESMC-5,
Thessaloniki;
08-17-2003
- 08-22-2003.
D. Duschlbauer, H. E. Pettermann, H. J. Böhm:
"Rechnerische Simulation der Wärmeleitungseigenschaften von MMCs mit spezieller Berücksichtigung eines thermischen Widerstandes am Interface";
Talk: 14. DGM Symposium Verbundwerkstoffe und Werkstoffverbunde,
Wien;
07-02-2003
- 07-04-2003.
D. Duschlbauer, H. E. Pettermann, H. J. Böhm:
"Heat Conduction of Spheroidal Inhomogeneities with Imperfect Interfaces";
Talk: 2003 ASME Mechanics and Materials Conference,
Scottsdale, AZ;
06-17-2003
- 06-20-2003.
H. E. Pettermann, S. Suresh:
"Finite Element Unit Cell Predictions of the Entire Overall Elastic, Piezoelectric and Dielectric Behavior of 1-3 Composites";
Talk: 7th European Mechanics of Materials Conference (EMMC7),
Frejus;
05-18-2003
- 05-23-2003.
D. Duschlbauer, H. J. Böhm, H. E. Pettermann:
"Die Berechnung von Faserspannungen in Composites mit nicht ausgerichteten Fasern basierend auf der Mori-Tanaka Methode";
Talk: Workshop AG Composite 2002,
Berlin;
11-18-2002
- 11-20-2002.
Habilitation Theses
H. E. Pettermann:
"Continuum Mechanics Modeling of Composite Materials";
TU Wien, Fakultät für Maschinenbau,
2003.
Doctor's Theses (authored and supervised)
J. Scheidl:
"Mixed kinematic modelling and simulation of slack belt drives using structural theories of rods and shells";
Supervisor, Reviewer: Y. Vetyukov, M. Krommer, H. E. Pettermann;
Institut für Mechanik und Mechatronik,
2021;
oral examination: 09-15-2021.
R. Riegler:
"Methodik zur Auslegung von gewickelten Rotoren für permanenterregte Axialflussmaschinen";
Supervisor, Reviewer: M. Grafinger, H. E. Pettermann, M. Leitner;
Inst. für Konstruktionwissenschaften und Produktentwicklung,
2021;
oral examination: 07-07-2021.
T. Ceglar:
"Modelling and simulation concepts for fibre reinforced polymers";
Supervisor, Reviewer: H. E. Pettermann, M. Todt, C. Schuecker, T. Antretter;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2021;
oral examination: 04-30-2021.
J. Kaul:
"A constitutive model for fiber reinforced plies - Anisotropic evolution of damage and plasticity";
Supervisor, Reviewer: H. E. Pettermann, C. Schuecker, T. Antretter;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2020;
oral examination: 08-28-2020.
M. Springer:
"Modeling and Simulation of Fatigue Damage in Power Semiconductors";
Supervisor, Reviewer: H. E. Pettermann, A. Turon, H.P. Gänser;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2017;
oral examination: 12-14-2017.
S. Eisner:
"An extension to Nitsche-type mortaring for non-conforming finite elements";
Supervisor, Reviewer: M. Kaltenbacher, H. E. Pettermann;
Mechanik und Mechatronik,
2016;
oral examination: 07-06-2016.
M. Schwab:
"Modelling and Simulation of the Impact Behaviour of Fibre Reinforced Laminates and Components";
Supervisor, Reviewer: H. E. Pettermann, C. Schuecker, T. Antretter;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2016.
T. Pélisset:
"Degradation Analysis of Thin Die-Attach Layer under Cyclic Thermal Load in Microelectronics Packaging";
Supervisor, Reviewer: T. Antretter, H. E. Pettermann;
Institut für Mechanik, Montanuniversität Leoben,
2015;
oral examination: 06-15-2015.
G. Kravchenko:
"Numerical Simulations of Fatigue Crack Problems in Semiconductor Devices Subjected to Thermomechanical Loading";
Supervisor, Reviewer: H. E. Pettermann, M. Kaltenbacher;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2014;
oral examination: 11-27-2014.
J. Gager:
"Modeling and Simulation Concepts for Advanced Braided Composites";
Supervisor, Reviewer: H. E. Pettermann, G. Pinter;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2013;
oral examination: 11-08-2013.
S. Badshah:
"Identification of vibration and elastic properties of aluminium foam using modal testing and analysis";
Supervisor, Reviewer: J. Wassermann, H. E. Pettermann;
Mechanik und Mechatronik,
2011;
oral examination: 11-29-2011.
T. Flatscher:
"A Constitutive Model for the Elasto-Plasto-Damage Ply Behavior in Laminated FRP Composites: Its Development, Implementation, and Application in FEM Simulations";
Supervisor, Reviewer: H. E. Pettermann, G. Pinter;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2010;
oral examination: 03-30-2010.
G. Wimmer:
"Computational Methods for the Prediction of Emergence and Growth of Delaminations in Laminated Composite Components";
Supervisor, Reviewer: H. E. Pettermann, O. Kolednik;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2009;
oral examination: 01-28-2009.
M.M. Jan:
"Application of Damage Tolerant Design in Mechanical Engineering";
Supervisor, Reviewer: W. Eichlseder, H. E. Pettermann;
Montanuniversität Leoben,
2008;
oral examination: 11-28-2008.
C.O. Huber:
"Numerical Simulations of Metal Matrix Composites - Tribological Behavior and Finite Strain Response on Different Length Scales";
Supervisor, Reviewer: H. E. Pettermann, T. Antretter;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2008;
oral examination: 02-21-2008.
M.H. Luxner:
"Modeling and Simualtion of Highly Porous Open Cell Structures - Elasto Plasticity and Localization versus Disorder and Defects";
Supervisor, Reviewer: H. E. Pettermann, J. Stampfl;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2006.
C. Schuecker:
"Mechanism Based Modeling of Damage and Failure in Fiber Reinforced Polymer Laminates";
Supervisor, Reviewer: H. E. Pettermann, S. Seidler;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2005.
H. E. Pettermann:
"Derivation and Finite Element Implementation of Constitutive Material Laws for Multiphase Composites Based on Mori-Tanaka Approaches";
Supervisor, Reviewer: F. G. Rammerstorfer, H.P. Degischer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1997.
Diploma and Master Theses (authored and supervised)
Ch. Kalteis:
"Experimentelle Charakterisierung und Simulation von Dünnschichtverklebungen";
Supervisor: M. Todt, H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2021;
final examination: 12-15-2021.
E. Sindhuber:
"Simulation von Schweißverzügen bei der Schienenfahrzeug-Fertigung";
Supervisor: H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2021;
final examination: 04-15-2021.
A. Juen:
"Thermo-visko-elastische Simulationen von Metallpartikel-verstärkten Polymeren";
Supervisor: H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2020;
final examination: 10-2020.
L. Huber:
"Modelling of time-temperature shifts of viscoelastic composites";
Supervisor: H. E. Pettermann, M. Todt;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2020;
final examination: 09-2020.
A. Wagner:
"Development of an Elasto-Damage Constitutive Law for Implicit Finite Element Methods";
Supervisor: H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2020;
final examination: 09-2020.
S. Trummer:
"Klebverbindungen - Simulation und Experiment";
Supervisor: M. Todt, T. Koch, H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2020;
final examination: 02-26-2020.
C. Kölbl:
"Untersuchung der strukturellen Stabilität und des Nachbeulverhaltens einer seilverspannten Gitterstruktur";
Supervisor: M. Todt, H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2019;
final examination: 11-20-2019.
B. Jordanov:
"Finite Elemente Simulationen einer Composite-Geflechtstruktur";
Supervisor: H. E. Pettermann, J. Kaul;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2019;
final examination: 09-25-2019.
M. Huber:
"Implementierung eines Post-Processing-Tools zur Bestimmung des lokalen Spannungsvektors an Materialgrenzen";
Supervisor: M. Todt, H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2019;
final examination: 05-09-2019.
C. Reichel:
"Bruchmechanische Simulation von Indentierungsversuchen in Gallium Nitrid";
Supervisor: H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2018;
final examination: 06-20-2021.
V. Unger:
"Non-linear finite element simulations of nanoindentation in Gallium Nitride considering fracture mechanics and plasticity";
Supervisor: H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2018;
final examination: 10-24-2018.
P. Hoffmann:
"Elasto-Plastic Finite Element Simulations of Nanoindentation Problems Utilizing Hill's Potential";
Supervisor: H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2018;
final examination: 03-22-2018.
B. Kóbor:
"Finite Elemente Simulationen einer Lochplatte aus Faserverbund-Laminat";
Supervisor: H. E. Pettermann, J. Kaul;
Institute of Lightweight Design and Structural Biomechanics,
2018;
final examination: 03-21-2018.
V. Björklund:
"Simulation of Delamination Migration in Laminated Composite Structures";
Supervisor: R. Denzer, H. E. Pettermann, J. Kaul;
Division of Solid Mechanics, Lund University,
2018.
M.M. Schasching:
"Finite Elemente Simulationen einer Composite-Struktur - Interaktion von Schichtschädigung und Delamination";
Supervisor: H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2017;
final examination: 06-21-2017.
T. Ceglar:
"Finite Element Method Simulations of the Delamination in Laminated Composite Structures";
Supervisor: H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2017.
C. Riener:
"Entwicklung eines nichtlinearen Finite Elemente Simulationsmodells zur Nachbildung des Crash-Verhaltens von gewebeverstärkten CFK/Epoxid-Laminaten";
Supervisor: H. E. Pettermann, M. Schwab;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2016;
final examination: 04-12-2016.
M. Lamprecht:
"Schraubenrutschen unter dynamischer Belastung und Berechnung der effektiven Schnittigkeit einer querkraftbelasteten Schraubenverbindung";
Supervisor: H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2016.
S. Aigner:
"Berechnung, Bewertung und Dimensionierung eines LKW-Bauteils aus faserverstärkten Kunststoffen";
Supervisor: H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2015;
final examination: 09-30-2015.
A. Blum:
"Finite Element Simulation of Uniaxial Periodic Structures";
Supervisor: H. E. Pettermann, M. Schwab;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2015;
final examination: 09-30-2015.
A. Salcher:
"FEM-Auslegung einer Kohlefaser-Geflechtstruktur";
Supervisor: H. E. Pettermann, M. Schwab;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2015;
final examination: 05-20-2015.
A. Bellés Meseguer:
"Numerical Simulations of the Crack Behavior of Brittle Cellular Materials";
Supervisor: H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2015;
final examination: 03-26-2015.
J. Regueiro Penado:
"Linear Viscoelastic UMAT Development in the Frequency Domain";
Supervisor: H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2015.
M. Springer:
"Nichtlineare Finite Elemente Simulation der Schädigungsmechanismen sowie der Resttragfähigkeit von schlagbeanspruchten Kohlenstofffaser-Epoxidharz-Verbunden";
Supervisor: H. E. Pettermann, M. Schwab;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2014;
final examination: 09-18-2014.
J. Broger:
"Adaptation of an Elasto-Plasto-Damage Model from ABAQUS/Standard to ABAQUS/Explicit and its Application to Laminated FRP";
Supervisor: H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2014;
final examination: 02-26-2014.
M. Gächter:
"Strukturoptimierung von Automobilkomponenten auf Basis von Ermüdungssimulationen";
Supervisor: H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2014.
M. Schwab:
"Prediction of Energy Dissipation due to Material Nonlinearities and its Application to Textile Composites";
Supervisor: H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2013;
final examination: 11-25-2013.
D. Kremmel:
"FEM und Modellreduktion. Vergleichsstudie des Doorslams mit Kontaktberücksichtigung";
Supervisor: H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik,
2013.
M. Meindlhumer:
"Schädigungs- und Versagensvorhersage von Gewebelaminaten duch mechanismenbasierte Hüllflächen";
Supervisor: H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2013.
C. Pagès Miró:
"Quasi-Static Simulation of Laminated Structures with Explicit Finite Element Methods";
Supervisor: H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien; UPC Terrassa,
2013.
R. Gmeiner:
"Mechanische Eigenschaften glasfaserverstärkter Biopolymere";
Supervisor: J. Stampfl, H. E. Pettermann;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2012;
final examination: 05-31-2012.
A. Kholkin:
"Numerical Simulation of Damage and Failure of Laminated 3-Point Bending Specimens";
Supervisor: H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien; Universidade de Aveiro,
2012.
J.L. Mandayo Fernández:
"Numerical Simulations of the Crush Behavior of Cellular Structures";
Supervisor: H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien; Universidade de Vigo,
2012.
E. Rama Lista:
"Finite Element Simulations of Laminated Composites under Consideration of Nonlinear Ply Material and Delamination";
Supervisor: H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien; Universidade de Vigo,
2012.
A. Fürlinger:
"Entwicklung eines statisch überbestimmten Lastgeschirrs mit flexiblen Lasteinleitungselementen für Flugzeugstrukturversuche";
Supervisor: H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2011.
J. Hüsing:
"Numerische Simulation des Relaxationsverhaltens von viskoelastischen zellulären Strukturen";
Supervisor: H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien; TU Dresden,
2011.
T. Hinterdorfer:
"FE-Modellierung und -Analyse eines Komposit-Flywheel-Rotors und Optimierungsbetrachtungen";
Supervisor: H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2010;
final examination: 10-27-2010.
J. Gager:
"Numerical Simulations of Delaminations and Cracks in Glued Die-Attach Semiconductor Devices";
Supervisor: H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2010;
final examination: 02-09-2010.
M. Geiss:
"Mechanische Eigenschaften partikelverstärkter Biopolymere";
Supervisor: J. Stampfl, H. E. Pettermann;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2006;
final examination: 05-22-2006.
G. Wimmer:
"Strength Analyse of Composite Components - Implementation of New Procedures";
Supervisor: H. E. Pettermann, D. H. Pahr;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2006.
J.F. Winklinger:
"Investigation of Corner Joints of Sandwich Plates";
Supervisor: H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2006.
M. Seyr:
"Numerische Simulation von regelmäßigen zellulären Strukturen";
Supervisor: H. J. Böhm, H. E. Pettermann;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2003.
Scientific Reports
R. Duy, M. Schasching, M. Todt, H. E. Pettermann:
"Wrinkling of hyperelastic sheets in the finite strain regime";
Report for Polymer Competence Center Leoben GmbH (PCCL);
Report No. ILSB-Report 309,
2021;
18 pages.
H. E. Pettermann, T. Ceglar:
"Unit Cell Predictions of a [90/0/0/90] FRE Laminate Under Uniaxial Stress in 45◦ Direction";
Report for Polymer Competence Center Leoben GmbH (PCCL);
Report No. ILSB-Report 307,
2021;
6 pages.
M. Schasching, R. Duy, M. Todt, H. E. Pettermann:
"Wrinkling of Anisotropic Hyperelastic Sheets in the Finite Strain Regime";
Report for Polymer Competence Center Leoben GmbH (PCCL);
Report No. ILSB-Report 310,
2021;
34 pages.
T. Ceglar, H. E. Pettermann:
"Nonlinear homogenisation of a FRE unit cell (confidential)";
Report for Polymer Competence Center Leoben GmbH (PCCL);
Report No. ILSB-Report 304,
2020;
13 pages.
T. Ceglar, H. E. Pettermann:
"Preliminary study on Fiber Reinforced Elastomer (FRE) behavior by means of unit cell FEM simulations (confidential)";
Report for Polymer Competence Center Leoben GmbH (PCCL);
Report No. ILSB-Report 306,
2020;
9 pages.
T. Ceglar, H. E. Pettermann:
"Wrinkling of thin fibre reinforced elastomer shells under tensile loads (confidential)";
Report for Polymer Competence Center Leoben GmbH (PCCL);
Report No. ILSB-Report 305,
2020;
14 pages.
T. Ceglar, H. E. Pettermann:
"Calibration of material parameters for Fung´s and Holzapfel-Gasser-Ogden anisotropic hyperelastic strain energy functions: Application for fibre reinforced elastomers (Confidental)";
Report for Polymer Competence Center Leoben GmbH (PCCL);
Report No. ILSB-Report 303,
2019;
33 pages.
T. Ceglar, H. E. Pettermann:
"Work-flow for modelling and simulation of multi-fibre unit cells under tri-axial loading (Confidental)";
Report for Polymer Competence Center Leoben GmbH (PCCL);
Report No. ILSB-Report 302,
2018;
24 pages.
H. E. Pettermann:
"Direction Dependent Time-Temperature-Shift Functions and Energy Considerations in Viscoelasticity";
Report No. ILSB-Report 301,
2018;
24 pages.
T. Ceglar, H. E. Pettermann:
"FEM simulations of fully and nearly incompressible hyperelastic materials: The effects of numerical precision (Confidental)";
Report for Polymer Competence Center Leoben GmbH (PCCL);
Report No. ILSB-Report 300,
2017;
15 pages.
C. Cheyrou, H. E. Pettermann:
"FEM Simulation of the Thermo-Viscoelastic Behaviour of Composites";
Report for Institut für Leichtbau und Struktur-Biomechanik, TU Wien;
Report No. ILSB-Report 298,
2016;
49 pages.
H. E. Pettermann:
"Linear Thermo-Viscoelastic Orthotropic Plane Stress Constitutive Law in the Time Domain";
Report for Institut für Leichtbau und Struktur-Biomechanik;
Report No. ILSB-Report 297,
2015;
37 pages.
M. Todt, M. Schwab, H. E. Pettermann:
"Impact modeling in ABAQUS/Explicit - An introduction";
Report for Institut für Leichtbau und Struktur-Biomechanik, TU Wien;
Report No. ILSB-Report 292,
2014;
18 pages.
M. Todt, M. Schwab, H. E. Pettermann:
"Modeling of Transverse Shear in Layered Composite Structures With Cohesive Elements";
Report for Institut für Leichtbau und Struktur-Biomechanik, TU Wien;
Report No. ILSB-Report 293,
2014;
25 pages.
T. Flatscher, H. E. Pettermann:
"PCCL Experiments Series III and Combination UMAT-EPD-FRP/CZE";
Report for Polymer Compentence Center Leoben (PCCL);
Report No. 01/2010,
2010;
16 pages.
H. E. Pettermann:
"Viscoelastic Mechanical Properties of Cellular Materials and Structures - The Development of an ABAQUS UMAT";
Report for Institut für Leichtbau und Struktur-Biomechanik, TU Wien;
Report No. ILSB Report 252,
2010;
14 pages.
C. Schuecker, C.G. Dávila, H. E. Pettermann:
"Modeling the Non-Linear Response of Fiber-Reinforced Laminates Using a Combined Damage/Plasticity Model";
Report for National Aeronauticas and Space Administration, Washington, DC;
Report No. NASA/TM-2008-215314,
2008;
25 pages.
H. E. Pettermann, C. Schuecker, C.O. Huber, G. Wimmer:
"AAR-ILSB-Jahresbericht der strategischen Forschung im 5. Projektjahr";
Report for Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR);
Report No. AAR-ILSB 27/2006,
2006;
14 pages.
C. Schuecker, H. E. Pettermann:
"Doppelwandiger Tank für kryogene Anwendungen: Vorstudien zur Berechnung der Außenwand unter Druckbelastung";
Report for Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR);
2006;
12 pages.
C. Schuecker, H. E. Pettermann:
"SHM Tests an Rohrproben: Festigkeitsberechnung bei Raumtemperatur";
Report for Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR);
Report No. AAR-ILSB 26/2006,
2006;
12 pages.
H. E. Pettermann, C. Schuecker, C.O. Huber:
"AAR-ILSB-Jahresbericht der strategischen Forschung im 4. Projektjahr";
Report for Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR);
2005.
I. Smojver, C. Schuecker, H. E. Pettermann:
"Damage Meso-Model for Fatigue Analysis of Fiber Reinforced Laminates";
Report for Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR);
2005.
C.O. Huber, H. E. Pettermann:
"Some Basics on Tribology";
Report for Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR);
2004.
H. E. Pettermann, C. Schuecker, C.O. Huber:
"AAR-ILFB-Jahresbericht der strategischen Forschung im 3. Projektjahr";
Report for Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR);
2004.
H. E. Pettermann, C. Schuecker, C.O. Huber:
"Arbeitsprogramm des ILSB im Rahmen der strategischen Forschung im 4. Projektjahr";
Report for Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe;
2004;
5 pages.
C. Schuecker, H. E. Pettermann:
"Kreisplatte unter zentrischer Druckbelastung als Test für interlaminare Schubfestigkeit von Laminaten";
Report for Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR);
2004.
C. Schuecker, H. E. Pettermann:
"Kreisplatte unter zentrischer Druckbelastung als Test für interlaminare Schubfestigkeit von Laminaten - Teil II";
Report for Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR);
2004.
C. Schuecker, H. E. Pettermann:
"Literature Review - Damage Modeling of Fiber Reinforced Laminates";
Report for Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR);
2004.
H. E. Pettermann, C. Schuecker:
"AAR-ILFB-Jahresbericht der strategischen Forschung im 2. Projektjahr";
Report for Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR);
2003.
H. E. Pettermann, C. Schuecker:
"Arbeitsprogramm des ILFB im Rahmen der strategischen Forschung im 2. Projektjahr";
Report for Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR);
2003.
H. E. Pettermann, C. Schuecker:
"Arbeitsprogramm des ILFB im Rahmen der strategischen Forschung im 3. Projektjahr";
Report for Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR);
2003.
T. Daxner, H. E. Pettermann:
"Optimization of Laminates with Genetic Algorithms";
Report for Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR);
2002.
D. Duschlbauer, H. E. Pettermann:
"Finite Elemente basierende Parameterstrudie zur Verdichtung von porösem Molybdän unter dreiachsigen Beanspruchungszusändent";
Report for Plansee AG;
2002.
H. E. Pettermann:
"Arbeitsprogramm des ILFB im Rahmen der strategischen Forschung";
Report for Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR);
2002.
H. E. Pettermann, C. Schuecker:
"AAR-ILFB Jahresbericht der strategischen Forschung";
Report for Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR);
2002.
C. Schuecker, H. E. Pettermann:
"Effektive Permeabilität von Laminaten in Dickenrichtung";
Report for Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR);
2002.
