Publikationsliste für Angehörige von
E302 - Institut für Energietechnik und Thermodynamik
E302-02 Strömungsmaschinen
als Autorinnen / Autoren bzw. wesentlich beteiligte Personen
Vorträge und Posterpräsentationen (mit Tagungsband-Eintrag)
183 Datensätze (1993 - 2020)
Die Publikationen der Fakultät für Maschinenwesen und Betriebswissenschaften sind erst ab dem Jahr 2002 vollzählig in der Publikationsdatenbank enthalten. Publikationen aus den Jahren vor 2002 können, müssen aber nicht in der Datenbank vorhanden sein.
Vorträge und Posterpräsentationen (mit Tagungsband-Eintrag)
B. Adjassoho, E. Kozeschnik, C. Lechner, F. Bleicher, S. Gössinger, C. Bauer:
"Induction of residual stresses and increase of surface hardness by Machine Hammer Peening technology";
Vortrag: 23rd International DAAAM Symposium,
Zadar, Kroazien;
24.10.2012
- 27.10.2012; in: "Annals of DAAAM for 2012&Proceeding of the 23rd International DAAAM Symposium",
B. Katalinic (Hrg.);
Annals of DAAAM for 2012 & Proceeding of the 23rd International DAAAM Symposium/DAAAM International Vienna,
23/1
(2012),
ISSN: 2304-1382;
S. 697
- 702.
P. Angerer:
"Systematic Optimisation of Maintenance and Refurbishment";
Vortrag: 12.Internationales Seminar Wasserkraftanlagen,
Wien, Österreich;
27.09.2002
- 29.09.2002; in: "Tagungsband 12.Internationales Seminar Wasserkraftanlagen",
E. Doujak, H. Matthias (Hrg.);
(2002),
ISBN: 3-85028-357-7;
S. 73
- 81.
S. aus der Wiesche, M. Passmann, R. Willinger:
"Reduction of Turbine Blade Tip Leakage Losses and Excitation Forces by Passive Tip Injection";
Vortrag: ASME 2015 International Mechnical Engineering Congress & Exposition (IMECE),
Houston, Texas, USA;
13.11.2015
- 19.11.2015; in: "Proceedings of the ASME 2015 International Mechanical Engineering Congress & Exposition",
(2015),
Paper-Nr. IMECE2015-50120,
9 S.
I. Bajracharya, C. Bauer, E. Doujak:
"Assessment of run-of-river hydro potential of the Sunkosi river using geographoc information system (GIS)";
Vortrag: 18th International Seminar on Hydropower Plants,
Laxenburg;
26.11.2014
- 28.11.2014; in: "18. International Seminar on Hydropower Plants - Innovations and Development Needs for Sustainable Growth of Hydropower",
(2014),
ISBN: 978-3-9501937-9-4;
S. 857
- 866.
T. Bajracharya, S. Shakya, A. Nakarmi, B. Ale, R. Shrestha, C. Bauer, E. Doujak, S. Gössinger:
"Energy Systems Planning and Analysis in Terms of Nepal";
Vortrag: 18th International Seminar on Hydropower Plants,
Laxenburg;
26.11.2014
- 28.11.2014; in: "18. International Seminar on Hydropower Plants - Innovations and Development Needs for Sustainable Growth of Hydropower",
(2014),
ISBN: 978-3-9501937-9-4;
S. 31
- 46.
S. Bauinger, B. Lindenthaler, R. Willinger, A. Marn, F. Heitmeir:
"Impact of Different Shroud Configurations on Leakage Flow of a LP Rotor";
Vortrag: 12th European Conference on Turbomachinery - Fluid Dynamics and Thermodynamics,
Stockholm;
03.04.2017
- 07.04.2017; in: "Proceedings of 12th European Conference on Turbomachinery - Fluid Dynamics and Thermodynamics",
(2017),
Paper-Nr. ETC2017-117,
12 S.
W. Beer, R. Willinger:
"Numerical Optimisation of a HP Steam Turbine Blade Using a Genetic Algorithm";
Vortrag: Conference on Modelling Fluid Flow (CMFF'06),
Budapest;
06.09.2006
- 09.09.2006; in: "Conference Proceedings (Volume II)",
(2006),
ISBN: 9630603829;
S. 1039
- 1046.
A. Benoni, R. Willinger:
"Design Modification of a Passive Tip-Leakage Control Method For Axial Turbines: Linear Cascade Wind Tunnel Results";
Vortrag: ASME 2013 Turbine Blade Tip Technical Symposium and Course Week,
Hamburg;
30.09.2013
- 03.10.2013; in: "ASME 2013 Turbine Blade Tip Technical Symposium and Course Week",
(2013),
Paper-Nr. TBTS2013-2056,
10 S.
A. Benoni, R. Willinger:
"Numerical Simulation of Passive Tip-Leakage Flow Control Method for Axial Turbines";
Vortrag: ECCOMAS 2012 (European Congress on Computational Methods in Applied Sciences and Engineering,
Wien;
10.09.2012
- 14.09.2012; in: "CD-ROM Proceedings",
(2012),
ISBN: 978-3-9502481-9-7;
Paper-Nr. 5429,
13 S.
N. Bhattarai, C. Bauer, E. Doujak:
"Residential Sector Energy Demand Projection and Analysis of Nepal for Sustainable Utilization of Local Hydropower Resources";
Vortrag: 18th International Seminar on Hydropower Plants,
Laxenburg;
26.11.2014
- 28.11.2014; in: "18. International Seminar on Hydropower Plants - Innovations and Development Needs for Sustainable Growth of Hydropower",
(2014),
ISBN: 978-3-9501937-9-4;
S. 845
- 866.
G. Bischelmaier, A. Benoni, R. Willinger:
"Computation of Leaf Seal Flow Using a Porous Medium Approach";
Vortrag: 9th European Conference on Turbomachinery - Fluid Dynamics and Thermodynamics,
Istanbul, Turkey;
21.03.2011
- 25.03.2011; in: "Conference Proceedings",
(2011),
ISBN: 978-975-561-389-5;
S. 57
- 66.
H. Böck, O. Promper, M. Schneeberger:
"2010 - Wendepunkt der Energiepolitik?";
Vortrag: EnInnov,
TU Graz;
10.02.2010
- 12.02.2010; in: "11. Symposium Energieinnovation",
Graz
(2010),
S. 1
- 12.
G. Canon Falla, R. Willinger:
"Numerical Investigation of Flow Interference Effects in Tandem Compressor Cascades";
Vortrag: ISABE2005 - 17th International Symposium on Airbreathing Engines,
Munich, Germany;
04.09.2005
- 09.09.2005; in: "Proceedings of ISABE2005",
(2005),
Paper-Nr. ISABE-2005-1053,
9 S.
E. Doujak:
"A New Method for the Evaluation of the Condition of Weirs and Gates";
Vortrag: 12.Internationales Seminar Wasserkraftanlagen,
Wien, Österreich;
27.11.2002
- 29.11.2002; in: "Tagungsband 12.Internationales Seminar Wasserkraftanlagen",
E. Doujak, H. Matthias (Hrg.);
(2002),
ISBN: 3-85028-357-7;
S. 163
- 172.
E. Doujak:
"Cost Structure and Cost Optimisation of Electromechanical Components of Hydropower Plants";
Vortrag: Hidroenergia 2002 - International Conference & Exhibition,
Mulhouse, France;
03.07.2002
- 06.07.2002; in: "Conference Proceedings Hidroenergia 2002",
Edition SHF,
(2002),
S. 43
- 50.
E. Doujak:
"Development, simulation and stress analysis of a rope trash rake machine for Small Hydropower plants";
Vortrag: Hidrogenia 06,
Crieff, Schottland;
06/2006; in: "Hidrogenia 06",
(2006),
13 S.
E. Doujak:
"Effects of Increased Renewable Energy Supply";
Vortrag: HydroVision 2014,
Nashville, Tennessee;
22.07.2014
- 25.07.2014; in: "Hydrovision 2014",
(2014),
6 S.
E. Doujak:
"Feasibility study of a small hydropower station in Austria";
Vortrag: Hidroenergia 04,
Falkenberg,Schweden;
17.06.2004
- 19.06.2004; in: "Hidroenergia 04",
(2004).
E. Doujak:
"Is it possible to lear managment decision by playing a game";
Vortrag: HydroVision 2004,
Quebec Kanada;
16.08.2004
- 20.08.2004; in: "HydroVision 2004",
HCI Publications,
(2004).
E. Doujak:
"Numerical calculation of the flow- and load- coefficient for the design of weirs and gates";
Vortrag: 15. Internationales Seminar Wasserkraftanlagen,
Wien Laxenburg (eingeladen);
26.11.2008
- 28.11.2008; in: "15. Internationales Seminar Wasserkraft",
(2008),
ISBN: 978-3-9501937-4-9;
S. 161
- 183.
E. Doujak:
"Online simulation - a tool for the future?";
Vortrag: 13. Internationales Seminar Wasserkraftanlagen,
Wien, Österreich;
24.11.2004
- 26.11.2004; in: "13. Internationales Seminar Wasserkraftmaschinen",
(2004),
ISBN: 3-9501937-0-7;
S. 43
- 55.
E. Doujak:
"Pumped storage powerplants with special reference to variable speed turbines and generators and its necessity in harnessing renewable energy sources";
Vortrag: International Seminar Hydro Power & Sustainable development,
Bhubaneswar, Odisha, Indien (eingeladen);
21.02.2013
- 22.02.2013; in: "Hydro Power & Sustainable Development",
(2013),
7 S.
E. Doujak:
"Rehabilitation of Small Hydrpower Plants in Austria with Special Consideration of the Ecology";
Poster: Hidroenergia 2002 - International Conference & Exhibition,
Mulhouse, France;
03.07.2002
- 06.07.2002; in: "Hidroenergia 2002 Conference Proceedings",
Edition SHF,
(2002),
S. 207.
E. Doujak, G. Edinger, G. Holzmann:
"The usage of strongly swirling flow for pressure pipe desilting in a hydropower plant";
Vortrag: 14th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery,
Honolulu, Hawai, USA;
27.02.2012
- 02.03.2012; in: "14th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery",
Technische Universität Darmstadt,
(2012),
8 S.
E. Doujak, M. Eichhorn:
"An Approach to Evaluate the Lifetime of a High Head Francis Runner";
Vortrag: ISROMAC 2016,
Honolulu, USA;
10.04.2016
- 15.04.2016; in: "ISROMAC 2016 International Symposium on Transport Phenomena and Dynamics of Rotating Machinery",
(2016),
10 S.
E. Doujak, M. Eichhorn:
"Impact of volatile electricity generation to the partial load behaviour of hydraulic machines";
Vortrag: HydroVision 2016,
Minneapolis, USA;
26.07.2016
- 29.07.2016; in: "Proceedings HydroVision 2016",
(2016),
12 S.
E. Doujak, S. Gössinger:
"Analysis of hydraulic facilities for combining pumped storage power systems and wind power in Austria";
Vortrag: Hidroenergia 2010,
Lausanne Schweiz;
16.06.2010
- 19.06.2010; in: "Hidroenergia 2010 - Lausanne",
(2010),
6 S.
E. Doujak, H. Götsch:
"Entwicklung eines Axialzyklons zur Triebwasserentsandung - Ein erster Ansatz";
Vortrag: 13. Internationales Anwenderforum Kleinwasserkraftwerke,
Kempten;
23.09.2010
- 24.09.2010; in: "13. Internationales Anwenderforum Kleinwasserkraftwerke",
(2010),
ISBN: 978-3-941785-32-8;
S. 54
- 60.
E. Doujak, H. Götsch:
"Pressure pipe desilting by an axial hydro cyclone - a first approach";
Vortrag: Hydro 2010,
Lissabon;
27.09.2010
- 29.09.2010; in: "HYDRO 2010 Meeting Demands for Changing World",
(2010),
8 S.
E. Doujak, H. Götsch:
"Usage of an Axial Hydro Cyclone as Sediment Separator";
Vortrag: 16. Internationales Seminar Wasserkraftanlagen,
Laxenburg;
24.11.2010
- 26.11.2010; in: "16. Internationales Seminar Wasserkraftanlagen",
(2010),
ISBN: 978-3-9501937-6-3;
S. 87
- 95.
E. Doujak, M. Latif:
"Lessons learned by playing the "Hydropower Plant Simulator - HPPS"";
Vortrag: HydroVision 2006,
Portland;
31.07.2006
- 04.08.2006; in: "HydroVision 2006",
(2006),
15 S.
E. Doujak, S. Naipal:
"The Gran-olo Mini Hydropower plant as local source for energy supply in the remote aera of Suriname- Preparation for implementation of high voltage transmission line";
Vortrag: 15. Internationales Seminar Wasserkraftanlagen,
Wien Laxenburg (eingeladen);
26.11.2008
- 28.11.2008; in: "15. Internationales Seminar Wasserkraft",
(2008),
ISBN: 978-3-9501937-4-9;
S. 625
- 632.
E. Doujak, S. Naipal:
"The Gran-olo-sula projekt: MHP implementation in the hinterland of surinam";
Vortrag: Hidroenergia 2008,
Bled Slowenien (eingeladen);
12.06.2008
- 13.06.2008; in: "Hidroenergia 2008",
(2008),
Paper-Nr. 6A3,
10 S.
E. Doujak, J. Nicolle:
"Basic Numerical Simulation of a Moody Draft Tube";
Vortrag: HydroVision 2008,
Sacramento (eingeladen);
14.07.2008
- 18.07.2008; in: "HydroVision 2008",
HCI Publications Inc,
(2008),
Paper-Nr. 219,
17 S.
E. Doujak, J. Nicolle:
"Numerical simulation and refurbishment options for a moody draft tube";
Vortrag: 17th International Conference on Hydropower Plants,
Laxenburg;
21.11.2012
- 23.11.2012; in: "Pumped storage in the context of renewable energy supply",
(2012),
ISBN: 978-3-9501937-8-7;
S. 505
- 515.
E. Doujak, P. Unterberger, C. Bauer:
"Decentralized Pump Storage Systems - A New Modular Small Hydro Concept";
Vortrag: HydroVision 2012,
Louisville, KY, USA;
17.07.2012
- 20.07.2012; in: "HydroVision 2012",
(2012),
14 S.
E. Doujak, P. Unterberger, C. Bauer:
"Design concept of a modular multistage pump-turbine";
Vortrag: Hydro 2012,
Bilbao;
29.10.2012
- 31.10.2012; in: "Innovative Approaches to Global Challenges",
(2012),
10 S.
E. Doujak, P. Unterberger, C. Bauer:
"Numerical Simulation of Multistage Pump-Turbine Components";
Vortrag: Hydroturbo 2012,
Brno;
25.09.2012
- 27.09.2012; in: "Hydroturbo 2012",
(2012),
S. 3
- 13.
E. Doujak, P. Unterberger, C. Bauer, M. Samonig:
"Development of a modular pumped turbine concept for decentralized power production";
Vortrag: Hidroenergia 2012,
Wroclaw, Polen;
23.05.2012
- 26.05.2012; in: "Hidroenergia 2012",
Wroclaw, Poland
(2012),
12 S.
E. Doujak, P. Unterberger, C. Bauer, M. Samonig:
"Modular Concept for Decentraliced Pump Storage Systems A Small Hydro Approach";
Vortrag: 14th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery,
Honolulu, Hawai, USA;
27.02.2012
- 02.03.2012; in: "14th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery",
Technische Universität Darmstadt,
(2012),
8 S.
E. Doujak, P. Unterberger, P. Steiner, C. Bauer:
"Numerical Investigation on the spiral case of a fully variable speed multistage pump turbine";
Vortrag: ISROMAC 15,
Honolulu, Hawaii, USA;
24.02.2014
- 28.02.2014; in: "15th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery",
(2014),
10 S.
E. Doujak, P. Unterberger, M. Weltzl, C. Bauer:
"Numerical investigation of the refeeding channel of a multistage high-head pump-turbine";
Vortrag: Conference on Modelling Fluid Flow (CMFF'12),
Budapest;
04.09.2012
- 07.09.2012; in: "Conference Proceedings",
(2012),
S. 772
- 779.
E. Doujak, J. Unterluggauer:
"Fluid-structure interaction of Francis turbines at different load steps";
Vortrag: FIV2018,
Toronto;
08.07.2018
- 11.07.2018; in: "Proceedings of the 9th International Symposium on Fluid-Structure Interactions, Flow-Sound Interaction, Flow-induced Vibration & Noise",
(2018),
7 S.
H. Ecker, H. Springer, H. Haselbacher:
"Dynamic Response of a Rotor Bearing System due to Bearing Failure";
Vortrag: IFToMM 4th Int. Conf. on Rotor Dynamics,
Chicago, USA;
07.09.1994
- 09.09.1994; in: "Proceedings of the 4th Inf. Conf. on Rotor Dynamics",
(1994).
G. Edinger, C. Bauer, J. Gaschl, R. Mack:
"Investigations on jet brake systems in pelton turbines";
Vortrag: 16. Internationales Seminar Wasserkraftanlagen,
Laxenburg bei Wien;
24.11.2010
- 26.11.2010; in: "16. Internationales Seminar Wasserkraftanlagen",
(2010),
ISBN: 978-3-9501937-6-3;
S. 153
- 163.
G. Edinger, S. Erne, E. Doujak, C. Bauer:
"Flow determination of a pump-turbine at zero discharge";
Vortrag: 27th IAHR Symposium,
Montreal, Canada;
22.09.2014
- 26.09.2014; in: "27th IAHR Symposium on Hydraulic Nachinery and Systems",
(2014),
11 S.
M. Eichhorn, E. Doujak:
"Impact of different operating conditions on the dynamic excitation of a high head Francis turbine";
Vortrag: ASME 2016 International Mechanical Engineering Congress and Exposition IMECE2016,
2016, Phoenix, Arizona, USA;
11.11.2016
- 17.11.2016; in: "Proceedings of the ASME 2016 International Mechanical Engineering Congress & Exposition",
(2016),
10 S.
M. Eichhorn, E. Doujak, A. Schübl:
"Cavitation MEasurement in Hydraulic Machines by using accelerometers";
Vortrag: 18th International Seminar on Hydropower Plants,
Laxenburg;
26.11.2014
- 28.11.2014; in: "18. International Seminar on Hydropower Plants - Innovations and Development Needs for Sustainable Growth of Hydropower",
(2014),
ISBN: 978-3-9501937-9-4;
S. 713
- 722.
M. Eichhorn, E. Doujak, L. Waldner:
"Investigation of the fluid-structure interaction of a high head Francis turbine using OpenFOAM and Code_ASTER";
Vortrag: 28th IAHR Symposium on Hydraulic Machines and Systems,
Grenoble;
04.07.2016
- 08.07.2016; in: "Proceedings of the 28th IAHR Symposium on Hydraulic Machines and Systems",
(2016),
ISBN: 979-10-93567-11-2;
10 S.
M. Eichhorn, L. Waldner, C. Bauer:
"Fatigue analysis of a medium head Francis runner at low-load operation using numerical investigations";
Vortrag: 19th International Seminar on Hydropower Plants,
Laxenburg;
09.11.2016
- 11.11.2016; in: "19th International Seminar on Hydropower Plants - Flexible Operation of Hydropower Plants in the Energy System",
(2016),
ISBN: 978-3-9504338-0-7;
S. 655
- 664.
H. El Batsh, H. Haselbacher:
"Effect of Gas and Surface Temperatures on Particle Deposition on Turbine Blades";
Vortrag: 4th European Conference on Turbomachinery - Fluid Dynamics and Thermodynamics,
Florence, Italy;
20.03.2001
- 23.03.2001; in: "Proceedings",
(2001),
ISBN: 88-86281-57-9;
S. 273
- 282.
H. El Batsh, H. Haselbacher:
"Effect of Turbulence Modeling on Particle Dispersion and Deposition on Compressor and Turbine Blade Surfaces";
Vortrag: ASME TURBO EXPO 2000,
Munich, Germany;
08.05.2000
- 11.05.2000; in: "ASME PAPER 2000-GT-519",
(2000).
H. El Batsh, H. Haselbacher:
"Numerical Investigation of the Effect of Ash Particle Deposition on the Flow Field Through Turbine Cascades";
Vortrag: ASME TURBO EXPO 2002,
Amsterdam, The Netherlands;
03.06.2002
- 06.06.2002; in: "Proceedings of ASME TURBO EXPO 2002",
(2002).
S. Erne, G. Edinger, C. Bauer:
"A Porous Media Approach for the Flow Resistance of a Tube-Bundle Flow Stabilizer";
Poster: Open Source CFD International Conference,
Paris-Chantilly;
03.11.2011
- 04.11.2011; in: "Open Source CFD International Conference",
(2011),
11 S.
S. Erne, G. Edinger, E. Doujak, C. Bauer:
"Numerical and Experimental Investigation on Unsteady Inflow Conditions of a Pump-Turbine";
Vortrag: FEDSM 2014 - 4th Joint US-European Fluid Engineering Division Summer Meeting,
Chicago, USA;
03.08.2014
- 07.08.2014; in: "Proceedings of the ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting",
(2014),
9 S.
S. Erne, G. Edinger, E. Doujak, C. Bauer, B. List, J. Gaschl:
"CFD validation of inlet flow of a pump-turbine in pump mode, operating at part load";
Vortrag: Hydro 2013,
Innsbruck;
07.10.2013
- 09.10.2013; in: "Conference papers of Hydro 2013 - Promoting the Versatile Role of Hydro",
Aqua-Media International,
(2013),
7 S.
S. Erne, M. Lenarcic, C. Bauer, S. Kyriacou:
"Shape optimization of a flow around circular diffuser in a turbulent incompressible flow";
Vortrag: ECCOMAS 2012 (European Congress on Computational Methods in Applied Sciences and Engineering,
Wien;
10.09.2012
- 14.09.2012; in: "Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering",
TU Wien,
Wien
(2012),
ISBN: 978-3-9502481-9-7;
Paper-Nr. 5427,
19 S.
A. Fischer, H. Frutschi, H. Haselbacher:
"Augmentation of Gas Turbine Power Output by Steam Injection";
Vortrag: ASME TURBO EXPO 2001,
New Orleans, USA;
04.06.2001
- 06.06.2001; in: "ASME Paper 2001-GT-0107",
(2001).
A. Fischer, H. Haselbacher:
"Realisierung von Gasturbinen-Kraftwerken mit Wasser/Dampf-Eindüsung mittels Kombination von Standardgasturbinen und Turboexpandern";
Vortrag: VDI Tagung,
Stuttgart;
11.03.2003
- 12.03.2003; in: "VDI-Berichte 1746",
(2003),
ISBN: 3-18-091746-6;
S. 93
- 106.
P. Ghaffari, S. Bauinger, R. Willinger, A. Marn:
"Impact of Passive Tip-Injection on Tip-Leakage Flow in Axial Low Pressure Turbine Stage";
Vortrag: ASME Turbo Expo 2015,
Montreal, Kanada;
15.06.2015
- 19.06.2015; in: "Proceedings of ASME Turbo Expo 2015",
(2015),
Paper-Nr. GT2015-42226,
11 S.
P. Ghaffari, R. Willinger:
"Impact of Passive Tip-Injection on the Performance of Partially Shrouded Turbines: Basic Concept and Preliminary Results";
Vortrag: ASME 2013 Turbine Blade Tip Technical Symposium and Course Week,
Hamburg;
30.09.2013
- 03.10.2013; in: "ASME 2013 Turbine Blade Tip Technical Symposium and Course Week",
(2013),
Paper-Nr. TBTS2013-2038,
11 S.
P. Ghaffari, R. Willinger:
"On the Impact of Passive Tip-Injection on the Downstream Flow Field of a Shrouded LP-Turbine: CFD and Experimental Results";
Vortrag: ASME Turbo Expo 2016,
Seoul, South Korea;
13.06.2016
- 17.06.2016; in: "Proceedings of ASME Turbo Expo 2016: Turbine Technical Conference and Exposition",
(2016),
Paper-Nr. GT2016-56196,
12 S.
P. Ghaffari, R. Willinger:
"Preliminary Investigation of Passive Tip-Injection in a Linear Turbine Cascade with Shrouded Blades";
Vortrag: 11th European Conference on Turbomachinery - Fluid Dynamics and Thermodynamics,
Madrid;
23.03.2015
- 26.03.2015; in: "Proceedings of 11th European Conference on Turbomachinery - Fluid Dynamics and Thermodynamics",
(2015),
ISSN: 2410-4833;
Paper-Nr. ETC2015-205,
12 S.
S. Gössinger, C. Bauer, C. Lechner:
"Using machine hammer peening to realize defined surface structure in order to reduce friction in turbulent fluid flows - part 2";
Vortrag: 18th International Seminar on Hydropower Plants,
Laxenburg;
26.11.2014
- 28.11.2014; in: "18. International Seminar on Hydropower Plants - Innovations and Development Needs for Sustainable Growth of Hydropower",
(2014),
ISBN: 978-3-9501937-9-4;
S. 751
- 764.
S. Gössinger, C. Bauer, C. Lechner, F. Bleicher:
"Using Machine Hammer Peening to Realize Defined Surface Structures in Order to Reduce Friction in Turbulent Fluid Flows";
Vortrag: 17th International Conference on Hydropower Plants,
Laxenburg;
21.11.2012
- 23.11.2012; in: "Pumped storage in the context of renewable energy supply",
(2012),
ISBN: 978-3-9501937-8-7;
S. 379
- 388.
H. Götsch, M. Linser, K. Käfer:
"The selection of a francis turbine as a direct drive for a centrifugal pump: from the idea to the design";
Vortrag: 15. Internationales Seminar Wasserkraftanlagen,
Wien Laxenburg (eingeladen);
26.11.2008
- 28.11.2008; in: "15. Internationales Seminar Wasserkraftanlagen",
(2008),
ISBN: 978-3-9501937-4-9;
S. 239
- 246.
M. Gonzalez, R. Padilla, R. Willinger:
"Combined Heat and Power Technologies: Application Studies of Options Including Micro Gas Turbines";
Vortrag: ASME TURBO EXPO 2004,
Vienna;
14.06.2004
- 17.06.2004; in: "Proceedings of ASME TURBO EXPO 2004",
(2004),
Paper-Nr. GT2004-53909,
10 S.
M. Gonzalez, R. Willinger:
"Technical and Economic Assessment of Small to Medium Scale Bio-Ethanol Distilleries with Cogeneration Systems";
Vortrag: ASME TURBO EXPO 2007,
Montreal, Kanada;
14.05.2007
- 17.05.2007; in: "Proceedings of ASME TURBO EXPO 2007",
(2007),
Paper-Nr. GT2007-28240,
12 S.
M. Hämmerle, M. Haider, R. Willinger, K. Schwaiger, R. Eisl, K. Schenzel:
"Saline cavern adiabatic compressed air energy storage using sand as heat storage material";
Vortrag: 10th Conference on Sustainable Development of Energy, Water and Environment Systems,
Dubrovnik, Croatia;
27.09.2015
- 02.10.2015; in: "Proceedings of the 10th Conference on Sustainable Development of Energy, Water and Environment Systems",
(2015),
S. 0583-1
- 0583-14.
F. Hahn, J. Unterluggauer, C. Bauer:
"Performance improvement of a mixed-flow pump by means of multi-objective optimization";
Vortrag: 20. Internationales Seminar Wasserkraftanlagen,
Laxenburg;
14.11.2018
- 16.11.2018; in: "20. Internationales Seminar Wasserkraftanlagen",
(2018),
ISBN: 978-39504338-1-4;
S. 761
- 773.
M. Hamik, R. Willinger:
"An Innovative Passive Tip-Leakage Control Method for Axial Turbines: Basic Concept and Performance Potential";
Vortrag: ISAIF8 - 8th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows,
Lyon;
02.07.2007
- 05.07.2007; in: "Conference Proceedings",
(2007),
S. 53
- 60.
M. Hamik, R. Willinger:
"An Innovative Passive Tip-Leakage Control Method for Axial Turbines: Linear Cascade Wind Tunnel Results";
Vortrag: ASME Turbo Expo 2008,
Berlin;
09.06.2008
- 13.06.2008; in: "Conference Proceedings",
(2008),
ISBN: 0-7918-3824-2;
Paper-Nr. GT2008-50056,
12 S.
A. Hammer, H. Götsch, K. Käfer:
"Creating a hydraulic simulation prgram for hydropower plants in Matlab/Simulink with special interest on the surge tank behaviour and the hydraulic instability of pump turbines";
Vortrag: 17th International Conference on Hydropower Plants,
Laxenburg;
21.11.2012
- 23.11.2012; in: "Pumped storage in the context of renewable energy supply",
E. Doujak, C. Bauer (Hrg.);
(2012),
ISBN: 978-3-9501937-8-7;
S. 695
- 699.
H. Haselbacher:
"Recent Advancements in Gas Turbines, Present Drivers and Their Future Impact";
Hauptvortrag: NATO Advanced Research Workshop: "Advanced Combustion and Aerothermal Technologies: Environmental Protection and Pollution Reductions",
Kiev (eingeladen);
15.05.2006
- 19.05.2006; in: "Proceedings",
(2006).
H. Haselbacher, A. Fischer:
"Turbomachines for Application in LOTHECO Powerplants";
Vortrag: First International Conference on Industrial Gas Turbine Technologies,
Brussels, Belgium;
10.07.2003
- 11.07.2003; in: "Proceedings of the First International Conference on Industrial Gas Turbine Technologies",
(2003),
8 S.
H. Haselbacher, H. Frutschi:
"Efficient District Heat Production by Heat Extraction from Combined Cycle Plants";
Vortrag: ASME TURBO EXPO '96,
Birmingham, England;
10.06.1996
- 13.06.1996; in: "ASME Paper 96-GT-538",
(1996).
M. Hinteregger, C. Janeczek, A. Karabegovic, H. Mad, H. Hackl, M. Gföhler, R. Willinger, W. Mohl:
"First results in the development of a pneumatically driven temporary left ventricle assist device";
Poster: 42nd Annual Meeting of the German Society for Cardiovascular and Thoracic Surgery,
Freiburg im Breisgau;
17.02.2013
- 20.02.2013; in: "Thorac cardiovasc Surg 2013",
Thieme,
61
(2013).
M. Hinteregger, C. Janeczek, R. Willinger, H. Mad, H. Hackl, W. Mohl, M. Gföhler:
"Development of a pneumatic driven left ventricular assistant device (LVAD) - preliminary results";
Poster: " Proc. XXIV Congress of the International Society of Biomechanics ISB 2013,
Natal, Brasilien;
04.08.2013
- 09.08.2013; in: "" Proc. XXIV Congress of the International Society of Biomechanics ISB 2013",
(2013),
Paper-Nr. ps2-22k,
2 S.
K. Hörzer, H. Haselbacher:
"CFD-Analyse einer mit Holzstaub direkt gefeuerten zweistufigen Gasturbinenbrennkammer";
Vortrag: Verbrennung und Feuerungen - 21. Deutscher Flammentag,
Cottbus, Deutschland;
09.09.2003
- 10.09.2003; in: "VDI Berichte Nr. 1750",
(2003),
ISBN: 3-18-091750-4;
S. 281
- 288.
K. Hörzer, H. Haselbacher:
"CFD-Analysis of a Two-Stage Wood-Dust-Fired Gas Turbine Combustion Chamber";
Vortrag: Conference on Modelling Fluid Flow (CMFF'03),
Budapest, Hungary;
03.09.2003
- 06.09.2003; in: "Conference Proceedings",
(2003),
ISBN: 9634207774;
S. 163
- 169.
K. Hörzer, H. Haselbacher:
"CFD-Analysis of the Influence of Modified Tangential Air Inlets on the Combustion Behavior of a Two-Stage Combustion Chamber";
Vortrag: ASME TURBO EXPO 2004,
Vienna;
14.06.2004
- 17.06.2004; in: "Proceedings of ASME TURBO EXPO 2004",
(2004),
Paper-Nr. GT2004-53517,
8 S.
K. Hörzer, N. Syred, A. Griffiths, T. Fraser, H. Haselbacher:
"CFD-Analysis of the Combustion in the Primary Stage of a Two-Stage Combustion Chamber";
Vortrag: ASME TURBO EXPO 2002,
Amsterdam, The Netherlands;
03.06.2002
- 06.06.2002; in: "Proceedings of ASME TURBO EXPO 2002",
(2002).
A. Hofstädter, H. Frutschi, H. Haselbacher:
"Effects of Steam Reheat on Power Plants Consisting of Steam Injected Gas Turbines with Sequential Combustion and Back Pressure Steam Turbine";
Vortrag: ASME TURBO EXPO '98,
Stockholm, Sweden;
02.06.1998
- 05.06.1998; in: "ASME Paper 98-GT-584",
(1998).
A. Hofstädter, H. Frutschi, H. Haselbacher:
"Gas Turbine Cycles with Sequential Combustion and Steam Injection";
Vortrag: ASME IJPGC'97,
Denver, USA;
03.11.1997
- 05.11.1997; in: "Proceedings of ASME IJPGC'97",
(1997).
A. Hofstädter, H. Haselbacher:
"Spezifische Arbeit und thermischer Wirkungsgrad von Gasturbinenanlagen mit sequentieller Verbrennung und Dampfeindüsung";
Vortrag: VGB-Konferenz "Forschung in der Kraftwerkstechnik 1998",
Essen, Deutschland;
11.02.1998
- 12.02.1998; in: "Tagungsband",
(1998).
C. Janeczek, M. Hinteregger, A. Karabegovic, R. Willinger, W. Mohl, V. Soragnese, M. Gföhler:
"Minimally Invasive, Pneumatically Operated Left Ventricular Assist Device - Design And First In-Vitro Results";
Poster: 21st Congresss of the European Society of Biomechanics (ESB 2015),
Prague (eingeladen);
05.07.2015
- 08.07.2015; in: "21st Congress of the European Society of Biomechanics",
(2015).
C. Janeczek, A. Karabegovic, M. Hinteregger, R. Willinger, M. Gföhler:
"Static And Dynamic Characteristics Of A Minimally Invasive Heart Catheter Pump";
Poster: XLIII Annual ESAO Congress,
Warschau;
14.09.2016
- 17.09.2016; in: "Int J Artif Organs",
Wichtig Publishing,
39(7):358
(2016),
ISSN: 0391-3988;
S. 360.
A. Joppich, H. Haselbacher:
"First Experience with a Fuel Feeding System for Wood Particle Fired Gas Turbines with Direct Combustion";
Vortrag: Biomass for Energy and Industry - 10th European Conference and Technology Exhibition,
Würzburg, Germany;
08.06.1998
- 11.06.1998; in: "Tagungsband",
(1998),
S. 1490
- 1493.
A. Joppich, H. Haselbacher:
"Pneumatic Fuel Feed System for a Pressurized Two Stage Combustion Chamber for Pulverized Wood";
Vortrag: Heat Engines and Environmental Protection,
Tata, Hungary;
25.05.1997
- 28.05.1997; in: "Proceedings",
(1997),
S. 58
- 67.
A. Joppich, H. Haselbacher:
"Pneumatic Fuel Feeding of a Directly Wood Particle Fired Gas Turbine Under Special Consideration of Low Conveying Air Ratio";
Vortrag: ASME TURBO EXPO '99,
Indianapolis, USA;
07.06.1999
- 10.06.1999; in: "ASME Paper 99-GT-353",
(1999).
M. Kalva, R. Willinger:
"Application of Aerodynamic Design Limits for Radial Flow Fans to the Cordier-Diagram";
Vortrag: Conference on Modelling Flud Flow - CMFF'18,
Budapest;
04.09.2018
- 07.09.2018; in: "Conference on Modelling Flud Flow - CMFF'18",
J. Vad (Hrg.);
(2018),
ISBN: 978-963313297-5;
Paper-Nr. 50,
8 S.
M. Keding, P. Dudzinski, M. Tajmar, R. Willinger, K. Käfer:
"Development of a μ-Scale Turbine Expander for Energy Recovery";
Vortrag: ASME Turbo Expo 2009,
Orlando;
08.06.2009
- 12.06.2009; in: "Proceedings of ASME Turbo Expo 2009",
(2009),
7 S.
E. Kozeschnik, B. Adjassoho, C. Lechner, Ch. Habersohn, F. Bleicher, S. Gössinger, C. Bauer:
"Controlled Surface Treatment With Machine Hammer Peening";
Vortrag: 22nd International Conference on Metallurgy and Materials,
Brno, Tschechien;
15.05.2012
- 17.05.2012; in: "METAL 2013",
(2012),
Paper-Nr. B28,
6 S.
C. Lechner, F. Bleicher, Ch. Habersohn, C. Bauer, S. Gössinger:
"The use of Machine Hammer Peening technology for smoothening and structuring of surfaces";
Vortrag: 23rd International DAAAM Symposium,
Zadar, Kroatien;
24.10.2012
- 27.10.2012; in: "Annals of DAAAM for 2012 & Proceedings of the 23rd International DAAAM Symposium",
DAAAM International Vienna, Austria, EU, 2012,
23/1
(2012),
ISSN: 2304-1382;
S. 331
- 337.
K. Leeb, H. Haselbacher:
"Numerical Prediction and Measurement of the Discharge Coefficient of a Labyrinth Seal - Straight Through Type";
Vortrag: Heat Engines and Environmental Protection,
Tata, Hungary;
25.05.1997
- 28.05.1997; in: "Proceedings",
(1997),
S. 86.
M. Lenarcic, C. Bauer, M. Giese, A. Jung:
"Improvement in the stability of S-shaped characteristics by using misaligned guide vanes";
Vortrag: 19th International Seminar on Hydropower Plants,
Laxenburg;
09.11.2016
- 11.11.2016; in: "19th International Seminar on Hydropower Plants - Flexible Operation of Hydropower Plants in the Energy System",
(2016),
ISBN: 978-3-9504338-0-7;
S. 665
- 674.
M. Lenarcic, C. Bauer, M. Giese, A. Jung:
"Prediction of S-shaped characteristics in reversible pump-turbines using different numerical approaches";
Vortrag: 28th IAHR Symposium on Hydraulic Machines and Systems,
Grenoble;
04.07.2016
- 08.07.2016; in: "Proceedings of the 28th IAHR Symposium on Hydraulic Machines and Systems",
(2016),
ISBN: 979-10-93567-11-2;
10 S.
M. Lenarcic, M. Eichhorn, S. Schoder, C. Bauer:
"Numerical investigation of a high head Francis turbine under steady operating conditions using foam-extend";
Vortrag: Francis-99 Workshop 1 : steady operation of Francis turbines,
Trondheim;
14.12.2014
- 16.12.2014; in: "Journal of Physics : Conference Series 579",
Journal of Physics . Conference Series,
579
(2014),
ISSN: 1742-6596;
Paper-Nr. 012008,
14 S.
M. Lenarcic, S. Erne, C. Bauer:
"Efficiency improvement by performing shape optimization of a circular flow around diffuser in a turbulent incompressible flow";
Vortrag: 17th International Conference on Hydropower Plants,
Laxenburg;
21.11.2012
- 23.11.2012; in: "Pumped storage in the context of renewable energy supply",
(2012),
ISBN: 978-3-9501937-8-7;
S. 527
- 536.
M. Lenarcic, S. Erne, C. Bauer:
"Improvement in performance parameters by shape optimization of a conical flow around diffuser";
Vortrag: ADMOS 2013,
Lissabon;
03.06.2013
- 05.06.2013; in: "Proceedings of the 6th International Conference on Adaptive Modeling and Simulation",
(2013),
ISBN: 978-84-941004-8-2;
S. 423
- 434.
B. List, E. Doujak, K. Käfer:
"Velocity field measurements on Pelton turbines by means of PIV";
Vortrag: 13. Internationales Seminar Wasserkraftanlagen,
Wien Österreich;
24.11.2004
- 26.11.2004; in: "13. Internationales Seminar Wasserkraftanlagen",
(2004),
ISBN: 3-9501937-0-7;
S. 259
- 269.
B. List, J. Prost, B. Sirok, G. Novak:
"Analyzing the flow in the casing of a Pelton turbine using Digital Image-Processing Technique";
Vortrag: 2nd International Symposium on Quantification of Visualized Processes in Fluid Dynamics,
Bled, Slovenia (eingeladen);
04.02.2002
- 05.02.2002; in: "2nd ISQVPFD - CD Rom Proceedings 2nd International Symposium on Quantification of Visualized Processes in Fluid Dynamics",
B. Sirok, M. Hocevar (Hrg.);
(2002),
ISBN: 961-6238-58-2;
S. 1
- 9.
Ch. Maier, W. Gawlik, L. Ruppert:
"Combined Electrical and Hydraulic Model for Dynamic Long-Term Operation of Pumped -Storage in SIMSEN";
Vortrag: 19th International Seminar on Hydropower Plants,
Laxenburg;
09.11.2016
- 11.11.2016; in: "19th International Seminar on Hydropower Plants - Flexible Operation of Hydropower Plants in the Energy System",
(2016),
ISBN: 978-3-9504338-0-7;
S. 719
- 728.
Ch. Maier, W. Gawlik, L. Ruppert:
"Vergleich von drehzahlvariablen Pumpspeichertechnologien in einem dynamischen Modell für Langzeitbetrachtungen";
Vortrag: IEWT Internationale Energiewirtschaftstagung TU Wien,
Wien;
15.02.2017
- 17.02.2017; in: "Klimaziele 2050: Chance für einen Paradigmenwechsel?",
(2017),
S. 1
- 12.
A. Maly, M. Eichhorn, C. Bauer:
"Experimental Investigation of transient pressure effects in the side chambers of a reversible pump turbine model";
Vortrag: 19th International Seminar on Hydropower Plants,
Laxenburg;
09.11.2016
- 11.11.2016; in: "19th International Seminar on Hydropower Plants - Flexible Operation of Hydropower Plants in the Energy System",
(2016),
ISBN: 978-3-9504338-0-7;
S. 675
- 684.
A. Maly, K. Käfer, C. Bauer:
"Flow phenomena in a model pump turbine at synchronous condenser mode - description of test rig";
Vortrag: 20. Internationales Seminar Wasserkraftanlagen,
Laxenburg;
14.11.2018
- 16.11.2018; in: "20. Internationales Seminar Wasserkraftanlagen",
(2018),
ISBN: 978-39504338-1-4;
S. 789
- 798.
A. Matthias, R. Willinger:
"Influence of Rotation and Eccentricity on Labyrinth Seal Leakage";
Vortrag: 8th European Conference on Turbomachinery - Fluid Dynamics and Thermodynamics,
Graz;
23.03.2009
- 27.03.2009; in: "Conference Proceedings",
(2009),
ISBN: 978-3-85125-036-7;
S. 1355
- 1364.
H. Matthias:
"Working and Research Areas of the Institute for Waterpower and Pumps";
Vortrag: 12.Internationales Seminar Wasserkraftanlagen,
Wien, Österreich;
27.09.2002
- 29.09.2002; in: "Tagungsband 12.Internationales Seminar Wasserkraftanlagen",
E. Doujak, H. Matthias (Hrg.);
(2002),
ISBN: 3-85028-357-7;
S. 1
- 8.
H. Matthias, P. Angerer, E. Doujak, B. List:
"Modelling the Influences of Hydro Power Refurbishing Projects";
Vortrag: 15th IFAC World Congress,
Barcelona, Spain;
22.07.2002
- 26.07.2002; in: "Preprints of the 15th Triennial World Congress of the International Federation of Automatic Control",
Pergamon,
(2002),
S. 1482.
H. Matthias, J. Prost:
"Vienna university of technology 100 years anniversary of the institut for watterpower and pumps";
Vortrag: 13. Internationales Seminar Wasserkraftanlagen,
Wien Laxenburg;
24.11.2004
- 26.11.2004; in: "13.Internationales Seminar Wasserkraftanlagen",
(2004),
ISBN: 3-9501937-0-7;
S. 1
- 9.
S. Naipal, E. Doujak:
"LOW HEAD TURBINE IMPLEMENTATION IN SURINAME";
Vortrag: 14. Internationales Seminar Wasserkraftanlagen,
Wien;
22.11.2006
- 24.11.2006; in: "14. Internationales Seminar Wasserkraftanlagen",
(2006),
ISBN: 3-9501937-2-3;
S. 365
- 376.
E. Neubauer, I. Smid, G. Requena, H.P. Degischer, P. Angerer:
"Thermophysical Properties of Copper Composites Reinforced with Negative CTE fillers";
Vortrag: Proceedings of the 2006 International Conference On Powder Metallurgy & Particulate Materials,
San Diego/ California/ USA;
18.06.2006
- 21.06.2006; in: "Proceedings of the 2006 International Conference On Powder Metallurgy & Particulate Materials",
http://www.mpif.org/Pubs/2006conts.asp?linkid=87,
(2006),
ISBN: 0-9762057-6-9;
S. 9-37
- 9-43.
G. Nicht, R. Willinger:
"An Analytical Pressure and Leakage Model for Leaf Seals";
Vortrag: ASME Turbo Expo 2018,
Lilleström;
11.06.2018
- 15.06.2018; in: "Proceedings of ASME Turbo Expo 2018",
(2018),
Paper-Nr. ASME Paper GT2018-76202,
11 S.
C. Öttl, R. Willinger:
"Thermodynamic and Mechanical Design Concept for Micro-Turbojet to Micro-Turboshaft Engine Conversion";
Vortrag: ASME Turbo Expo 2020,
London;
22.06.2020
- 26.06.2020; in: "ASME Turbo Expo 2020",
(2020),
Paper-Nr. ASME Paper GT2020-14498,
11 S.
M. Passmann, S. aus der Wiesche, F. Joos, R. Willinger:
"The Physical Mechanism of Tip Leakage Loss Reduction by Means of Passive Injection in Low Mach Number Flows";
Vortrag: ASME Turbo Expo 2018,
Lilleström;
11.06.2018
- 15.06.2018; in: "Proceedings of ASME Turbo Expo 2018",
(2018),
Paper-Nr. ASME Paper GT2018-76336,
11 S.
M. Pelzmann, H. Haselbacher:
"Combustion Chamber for a Directly Wood Particle Fired Gas Turbine";
Vortrag: ASME TURBO EXPO 2002,
Amsterdam, The Netherlands;
03.06.2002
- 06.06.2002; in: "Proceedings of ASME TURBO EXPO 2002",
(2002).
M. Posch, C. Tmej, H. Haselbacher:
"CFD Simulation of Wood Powder Feeding into a Gas Turbine Combustion Chamber";
Poster: Twelfth European Biomass Conference,
Amsterdam, The Netherlands;
17.06.2002
- 21.06.2002; in: "Proceedings of the Twelfth European Biomass Conference",
(2002),
ISBN: 88-900442-5-x;
S. 840
- 843.
M. Posch, C. Tmej, H. Haselbacher:
"Directly Wood Particle Fired Gas Turbine: Design, Simulation and Testing";
Vortrag: GEPESZET 2002,
Budapest, Hungary;
30.05.2002
- 31.05.2002; in: "Proceedings of the Third Conference on Mechanical Engineering",
(2002),
ISBN: 9636991650;
S. 66
- 71.
O. Promper, H. Böck:
"Can Austria survive without Nuclear Power?";
Vortrag: Nuclear Society of Slovenia,
Slowenien;
10.09.2007
- 13.09.2007; in: "Nuclear Energy for New Europe 2007",
(2007),
ISBN: 978-961-6207-28-7;
S. 013.1
- 013.9.
O. Promper, H. Böck:
"CO2 emissions and supply guarantee- is Austrias power sector able to accomplish this challanges without nuclear power also in the future?";
Vortrag: International Youth Conference on Energetics,
Budapest;
31.05.2007
- 02.06.2007; in: "International Youth Conference on Energetics",
(2007),
ISBN: 978-963-420-908-9;
6 S.
O. Promper, H. Böck:
"Kernkraftwerke der Generation III+";
Poster: 5. Internationale Energiewirtschaftstagung an der TU Wien - IEWT 2007,
Wien;
14.02.2007
- 16.02.2007; in: "Energiesysteme der Zukunft",
(2007),
S. 255
- 256.
J. Prost, N. Böhm, H. Matthias:
"Randbedingungen für das Auftreten von Spannungsrisskorrosion in Armaturen bei erdverlegten Fernwärmenetzen";
Vortrag: XXXIV Kraftwerkstechnisches Kolloquium,
Dresden, Deutschland;
24.09.2002
- 25.09.2002; in: "XXXIV Kraftwerkstechnisches Kolloquium Dresden - Beitragsmanuskripte (Vorträge VT1 bis VT6, VB1 bis VB3, VN1 bis VN4, VK1 bis VK33)",
(2002),
S. 193
- 196.
J. Rejek, S. aus der Wiesche, R. Willinger:
"Blade Tip Leakage Loss Reduction By Means Of Passive Tip Injection: Linear Cascade Wind Tunnel Results";
Vortrag: ASME Turbo Expo 2017,
Charlotte, USA;
26.06.2017
- 30.06.2017; in: "Proceedings of the ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition",
(2017),
Paper-Nr. GT2017-63083,
10 S.
J. Rejek, M. Passmann, K. Hasselmann, F. Reinker, S. aus der Wiesche, L. Mazor, R. Willinger:
"Profile and Mixing Losses of a Turbine Cascade Under the Condition of Low Reynolds Number Flow";
Vortrag: ASME 2016 Fluids Engineering Division Summer Meeting,
Washington, DC, USA;
10.07.2016
- 14.07.2016; in: "Proceedings of the ASME 2016 Fluids Enegineering Division Summer Meeting",
(2016),
Paper-Nr. FEDSM2016-7568,
11 S.
L. Ruppert, K. Käfer, C. Bauer:
"Steady Efficiency Optimization of several hydraulic generating unit systems";
Vortrag: 18th International Seminar on Hydropower Plants,
Laxenburg;
26.11.2014
- 28.11.2014; in: "18. International Seminar on Hydropower Plants - Innovations and Development Needs for Sustainable Growth of Hydropower",
(2014),
ISBN: 978-3-9501937-9-4;
S. 477
- 486.
L. Ruppert, Ch. Maier, C. Bauer:
"Service of Different Pumped-Storage Schemes for an Electrical Grid with increased Renewable Energy Generation";
Vortrag: 19th International Seminar on Hydropower Plants,
Laxenburg;
09.11.2016
- 11.11.2016; in: "19th International Seminar on Hydropower Plants - Flexible Operation of Hydropower Plants in the Energy System",
(2016),
ISBN: 978-3-9504338-0-7;
S. 707
- 717.
L. Ruppert, R. Schürhuber, C. Bauer:
"Technisch-wirtschaftliche Untersuchung verschiedener Großspeicherlösungen";
Poster: 10. Internationale Energiewirtschaftstagung an der TU Wien,
Wien;
15.02.2017
- 17.02.2017; in: "IEWT 2017",
(2017),
S. 444
- 445.
A. Ruprecht, C. Bauer, E. Göde, B. Janetzky, P. LLosa, M. Maihöfer, B. Welzel:
"Strömungseffekte in einem Dreifach - Abzweiger (Trifurkation) - Numerische Analyse und deren Grenzen";
Vortrag: 10. Internationales Seminar Wasserkraftanlagen,
Wien;
10.11.1998
- 12.11.1998; in: "Tagungsband 10. Internationales Seminar Wasserkraftanlagen",
(1998),
S. 397
- 405.
M. Schinnerl, W. Beer, R. Willinger:
"Interpretation of Unexpected Aggregation of Condensate in Shrouded HP-Stages of an Industrial Steam Turbine";
Vortrag: ASME Turbo Expo 2014,
Düsseldorf;
16.06.2014
- 20.06.2014; in: "Proceedings of ASME Turbo Expo 2014",
(2014),
Paper-Nr. GT2014-26083,
10 S.
F. Sengschmied, H. Haselbacher:
"Flow Structure of the Non-Reacting Flow Field of Cyclone Combusters for Wood Fired Gas Turbines";
Vortrag: ASME Cogen Turbo Power'95,
Vienna, Austria;
23.08.1995
- 25.08.1995; in: "ASME Paper 95-CTP-27",
(1995).
F. Sengschmied, H. Haselbacher:
"Performance of a Pressurized Two Stage Low NOx Combustion Chamber for Pulverized Wood";
Vortrag: Heat Engines and Environmental Protection,
Balatonfüred, Hungary;
22.05.1995
- 25.05.1995; in: "Proceedings",
(1995),
ISBN: 9634204635;
S. 11
- 18.
B. Sirok, G. Novak, M. Hocevar, J. Prost:
"Visualization Monitoring of Cavitation in Water Turbines";
Vortrag: 12.Internationales Seminar Wasserkraftanlagen,
Wien, Österreich;
27.09.2002
- 29.09.2002; in: "Tagungsband 12.Internationales Seminar Wasserkraftanlagen",
E. Doujak, H. Matthias (Hrg.);
(2002),
ISBN: 3-85028-357-7;
S. 305
- 314.
H. Springer, H. Ecker, H. Haselbacher:
"A Numerical Case Study of Bearing Failure Mechanisms in Turbomachinery";
Vortrag: ASME Cogen Turbo Power'95,
Vienna, Austria;
23.08.1995
- 25.08.1995; in: "ASME Paper 95-CTP-015",
(1995).
K. Stachel, H. Frutschi, H. Haselbacher:
"Thermodynamic Heating with Various Types of Cogeneration Plants and Heat Pumps";
Vortrag: ASME Cogen Turbo Power'93,
Bournemouth, UK;
21.09.1993
- 23.09.1993; in: "Proceedings of the ASME Cogen Turbo Power'93",
(1993),
ISBN: 0-7918-0685-5;
S. 159
- 169.
B. Steidl, R. Klar, R. Gabi, K. Käfer, C. Bauer:
"Prepare bouyant energy - innovative concept for hydraulic offshore energy storage";
Vortrag: 20. Internationales Seminar Wasserkraftanlagen,
Laxenburg;
14.11.2018
- 16.11.2018; in: "20. Internationales Seminar Wasserkraftanlagen",
(2018),
ISBN: 978-39504338-1-4;
S. 165
- 176.
H. Steinrück, A. Maly:
"Experimental and asymptotic investigation of a rotary wave in a cylindrical container";
Vortrag: 88th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM),
Weimar;
06.03.2017
- 10.03.2017; in: "88th Meeting of the Internatinal Association of Applied Mathematics and Mechanics",
C. Könke, C. Trunk (Hrg.);
Proceedings in Applied Mathematics and Mechanics,
17
(2017),
ISSN: 1617-7061;
S. 667
- 668.
H. Steinrück, A. Maly:
"The growth of a gravity wave in a cylindrical container";
Vortrag: 20. Internationales Seminar Wasserkraftanlagen,
Laxenburg;
14.11.2018
- 16.11.2018; in: "20th International Seminar on Hydropower Plants",
E. Doujak, C. Bauer (Hrg.);
(2018),
ISBN: 978-39504338-1-4;
S. 775
- 788.
H. Steinrück, A. Maly, G. Glanz:
"A rotary wave in phase condenser mode";
Vortrag: Conference on Modelling Flud Flow - CMFF'18,
Budapest;
04.09.2018
- 07.09.2018; in: "CMFF 18",
J. Vad (Hrg.);
(2018),
ISBN: 978-963313297-5;
S. 1
- 8.
C. Tmej, H. Haselbacher:
"Development of Wood Powder Feeding into Gas Turbine Combustion Chambers";
Vortrag: First World Conference and Technology Exhibition on Biomass for Energy and Industry,
Sevilla, Spain;
05.06.2000
- 09.06.2000; in: "Proceedings",
(2000),
ISBN: 1902916158;
S. 783
- 786.
C. Tmej, H. Haselbacher:
"Pneumatic Fuel Feeding System of a Directly Wood Particle Fired Gas Turbine";
Vortrag: Heat Engines and Environmental Protection,
Balatonfüred, Hungary;
31.05.1999
- 02.06.1999; in: "Proceedings",
(1999),
ISBN: 963-420-5976;
S. 35
- 43.
P. Unterberger:
"Modulares Pumpturbinenkonzept für Kleinwasserkraftanlagen";
Vortrag: 15. Internationales Anwenderforum Kleinwasserkraftwerke,
Bozen, Italien;
20.09.2012
- 21.09.2012; in: "Kleinwasserkraftwerke",
OTTI e.V.,
(2012),
ISBN: 978-3-943891-00-3;
S. 110
- 115.
P. Unterberger, C. Bauer, J. Gaschl, R. Mack:
"Studies on the free jet of pelton nozzles";
Vortrag: 16. Internationales Seminar Wasserkraftanlagen,
Wien Laxenburg;
24.11.2010
- 26.11.2010; in: "16.Internationales Seminar Wasserkraftanlagen",
(2010),
ISBN: 978-3-9501937-6-3;
S. 131
- 141.
P. Unterberger, E. Doujak, C. Bauer:
"Numerical Investigation on a pumpturbine stage with fully vaned return-channel geometry";
Vortrag: ISROMAC 15,
Honolulu, Hawaii, USA;
24.02.2014
- 28.02.2014; in: "15th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery",
(2014),
8 S.
P. Unterberger, E. Doujak, C. Bauer:
"Small Hydro approach for Pump-Turbines - is a modular concept a possible solution?";
Vortrag: 17th International Conference on Hydropower Plants,
Laxenburg;
21.11.2012
- 23.11.2012; in: "Pumped storage in the context of renewable energy supply",
(2012),
ISBN: 978-3-9501937-8-7;
S. 91
- 103.
J. Unterluggauer, E. Doujak, C. Bauer:
"Experimental and numerical study of a prototype Francis turbine startup";
Vortrag: 2nd IAHR Asia-Symposium on Hydraulic Machinery and Systems,
Busan, Korea;
24.09.2019
- 25.09.2019; in: "Proceedings 2nd IHAR Asia-Symposium",
(2019),
10 S.
J. Unterluggauer, E. Doujak, C. Bauer:
"Fatigue analysis of a prototype Francis turbine based on strain";
Vortrag: 20. Internationales Seminar Wasserkraftanlagen,
Laxenburg;
14.11.2018
- 16.11.2018; in: "20. Internationales Seminar Wasserkraftanlagen",
Wien
(2018),
ISBN: 978-3-9504338-1-4;
S. 707
- 720.
J. Unterluggauer, E. Doujak, C. Bauer:
"Numerical Fatigue Analysis of a Prototype Francis Turbine Runner in Low-Load Operation";
Vortrag: ETC 13 - 13th European Conference on Turbomachinery Fluid Dynamics & Thermodynamics,
Lausanne, Schweiz;
08.04.2019
- 12.04.2019; in: "Proceedings of 13th European Confernce on Turbomachinery Fluid Dynamics $ Thermodynamics",
(2019),
Paper-Nr. ETC2019-123,
13 S.
J. Unterluggauer, M. Eichhorn, E. Doujak:
"Fatigue analysis of Francis turbines with different specific speeds using site measurements";
Vortrag: 19th International Seminar on Hydropower Plants,
Laxenburg;
09.11.2016
- 11.11.2016; in: "19th International Seminar on Hydropower Plants - Flexible Operation of Hydropower Plants in the Energy System",
(2016),
ISBN: 978-3-9504338-0-7;
S. 645
- 654.
R. Willinger:
"A Three-Hole Pressure Probe Exposed to Wall Proximity Effects: Experimental, Numerical and Analytical Investigation";
Vortrag: Conference on Modelling Fluid Flow (CMFF'06),
Budapest;
06.09.2006
- 09.09.2006; in: "Conference Proceedings (Volume I)",
(2006),
ISBN: 9630603616;
S. 537
- 544.
R. Willinger:
"Das CORDIER-Diagramm für Strömungsarbeitsmaschinen - Eine theoretische Begründung mittels Stufenkennlinien";
Vortrag: 6. VDI-Fachtagung Ventilatoren,
Braunschweig;
16.11.2010
- 17.11.2010; in: "Ventilatoren: Entwicklung - Planung - Betrieb",
VDI Verlag GmbH,
VDI Berichte 2112
(2010),
ISBN: 978-3-18-092112-9;
S. 17
- 28.
R. Willinger:
"Grundlagen der Dampfturbinen";
Vortrag: Moderne Auslegungsverfahren für hydraulische und thermische Turbomaschinen,
Erlangen (eingeladen);
28.02.2011
- 03.03.2011; in: "Moderne Auslegungsverfahren für hydraulische und thermische Turbomaschinen",
(2011).
R. Willinger:
"Grundlagen der stationären Gasturbinen";
Vortrag: Moderne Auslegungsverfahren für hydraulische und thermische Turbomaschinen,
Erlangen (eingeladen);
28.02.2011
- 03.03.2011; in: "Moderne Auslegungsverfahren für hydraulische und thermische Turbomaschinen",
(2011).
R. Willinger:
"Influence of Hysteresis Effects on the Calibration Data of a Three-Hole Pressure Probe: Experimental, Numerical and Analytical Investigation";
Vortrag: Conference on Modelling Fluid Flow (CMFF'12),
Budapest;
04.09.2012
- 07.09.2012; in: "Conference Proceedings",
Volume 1
(2012),
ISBN: 978-963-08-4586-1;
S. 285
- 291.
R. Willinger:
"Performance Characteristic of a Single-Blade Pump From the Viewpoint of a Positive Displacement Machine";
Vortrag: 20. Internationales Seminar Wasserkraftanlagen,
Laxenburg;
14.11.2018
- 16.11.2018; in: "20. Internationales Seminar Wasserkraftanlagen",
E. Doujak, C. Bauer (Hrg.);
(2018),
ISBN: 978-39504338-1-4;
S. 129
- 138.
R. Willinger:
"Theoretical Interpretation of the CORDIER-Lines for Squirrel-Cage and Cross-Flow Fans";
Vortrag: ASME Turbo Expo 2012,
Kopenhagen;
11.06.2012
- 15.06.2012; in: "Proceeedings of ASME Turbo Expo 2012",
(2012),
Paper-Nr. GT2012-68186,
10 S.
R. Willinger:
"Two-Dimensional Flow in a Linear Turbine Cascade with a Thick Trailing Edge. Computation and Experiment";
Vortrag: Heat Engines and Environmental Protection,
Balatonfüred, Hungary;
22.05.1995
- 25.05.1995; in: "Proceedings",
(1995),
ISBN: 9634204635;
S. 144
- 151.
R. Willinger, C. Bauer:
"The CORDIER-Diagram for Hydraulic Turbines: A Theoretical Investigation Based on Head Curves";
Vortrag: 16. Internationales Seminar Wasserkraftanlagen,
Laxenburg;
24.11.2010
- 26.11.2010; in: "16. Internationales Seminar Wasserkraftanlagen",
(2010),
ISBN: 978-3-9501937-6-3;
S. 191
- 202.
R. Willinger, H. Haselbacher:
"A Three-Hole Pressure Probe Exposed to Velocity Gradient Effects - Experimental Calibration and Numerical Investigation";
Vortrag: Conference on Modelling Fluid Flow (CMFF'03),
Budapest, Hungary;
03.09.2003
- 06.09.2003; in: "Conference Proceedings",
(2003),
ISBN: 9634207774;
S. 413
- 420.
R. Willinger, H. Haselbacher:
"Axial Turbine Tip-Leakage Losses at Off-Design Incidences";
Vortrag: ASME TURBO EXPO 2004,
Vienna;
14.06.2004
- 17.06.2004; in: "Proceedings of ASME TURBO EXPO 2004",
(2004),
Paper-Nr. GT2004-53039,
10 S.
R. Willinger, H. Haselbacher:
"Berechnung und Messung der ebenen turbulenten Strömung in einem geraden Turbinengitter";
Vortrag: FIDAP-Benutzertreffen,
Wiesbaden, Deutschland;
23.10.1996
- 24.10.1996; in: "Tagungsunterlagen",
(1996).
R. Willinger, H. Haselbacher:
"Deviation and Profile Losses in a Turbine Cascade at Off-Design Incidences";
Vortrag: SYMKOM'99,
Lodz, Poland;
05.10.1999
- 08.10.1999; in: "Proceedings",
(1999),
S. 431
- 443.
R. Willinger, H. Haselbacher:
"Experimental and Numerical Investigation of the Flow Field in a Linear Turbine Cascade Including Tip Clearance Effects";
Vortrag: IMP'97, Modelling and Design in Fluid-Flow Machinery,
Gdansk, Poland;
18.11.1997
- 21.11.1997; in: "Proceedings",
(1997),
ISBN: 83-907526-4-6;
S. 193
- 201.
R. Willinger, H. Haselbacher:
"Experimental and Numerical Investigation of the Secondary Flow Field in a Linear Turbine Cascade";
Vortrag: Heat Engines and Environmental Protection,
Tata, Hungary;
25.05.1997
- 28.05.1997; in: "Proceedings",
(1997),
S. 94
- 102.
R. Willinger, H. Haselbacher:
"Measurement of the Three-Dimensional Flow Field Downstream of a Linear Turbine Cascade with Tip Gap";
Vortrag: 2nd European Conference on Turbomachinery - Fluid Dynamics and Thermodynamics,
Antwerpen, Belgium;
05.03.1997
- 07.03.1997; in: "Proceedings",
(1997),
ISBN: 90-5204-032-x;
S. 191
- 199.
R. Willinger, H. Haselbacher:
"On the Modelling of Tip Leakage Flow on Axial Turbine Blade Rows";
Vortrag: ASME TURBO EXPO 2000,
Munich, Germany;
08.05.2000
- 11.05.2000; in: "ASME Paper 2000-GT-633",
(2000).
R. Willinger, H. Haselbacher:
"The Role of Rotor Tip Clearance on the Aerodynamic Interaction of a Last Gas Turbine Stage and an Exhaust Diffuser";
Vortrag: ASME TURBO EXPO '98,
Stockholm, Sweden;
02.06.1998
- 05.06.1998; in: "ASME Paper 98-GT-094",
(1998).
R. Willinger, H. Haselbacher:
"Three-Dimensional Flow and Turbulence Structure Downstream of a Linear Turbine Cascade at Off-Design Incidences";
Vortrag: 5th European Conference on Turbomachinery - Fluid Dynamics and Thermodynamics,
Prague, Czech Republic;
17.03.2003
- 22.03.2003; in: "Conference Proceedings",
(2003),
S. 1017
- 1028.
R. Willinger, H. Haselbacher:
"Turbulence in a Tip-Leakage Vortex: A Factor Influencing the Gas Turbine Exhaust Diffuser Flow";
Vortrag: Second International Conference on Industrial Gas Turbine Technologies,
Bled, Slovenia;
29.04.2004
- 30.04.2004; in: "Conference Programme and Abstracts",
(2004),
ISBN: 961-6238-88-4;
9 S.
R. Willinger, H. Haselbacher:
"Vergleich verschiedener aerodynamischer Lastverteilungskonzepte in vielstufigen Axialverdichtern";
Vortrag: Thermische Strömungsmaschinen: Turbokompressoren im industriellen Einsatz,
Hannover, Deutschland;
06.10.1998
- 07.10.1998; in: "VDI Berichte 1425",
(1998),
ISBN: 3-18-091425-4;
S. 121
- 131.
R. Willinger, K. Hörzer, H. Haselbacher:
"Influence of Variable Inlet Guide Vanes on the Operational Behaviour of Multistage Axial Compressors with Various Aerodynamic Load Distrinutions";
Vortrag: 4th European Conference on Turbomachinery - Fluid Dynamics and Thermodynamics,
Florence, Italy;
20.03.2001
- 23.03.2001; in: "Proceedings",
(2001),
ISBN: 88-86281-57-9;
S. 45
- 56.
R. Willinger, M. Köhler:
"Influence of Blade Loading Criteria and Design Limits on the Cordier-Line for Axial Flow Fans";
Vortrag: ASME Turbo Expo 2014,
Düsseldorf;
16.06.2014
- 20.06.2014; in: "Proceedings of ASME Turbo Expo 2014",
(2014),
Paper-Nr. GT2014-25140,
11 S.
R. Willinger, M. Köhler:
"Theoretical Interpretation of the CORDIER-Line for Cross-Flow Turbines";
Vortrag: 17th International Conference on Hydropower Plants,
Laxenburg;
21.11.2012
- 23.11.2012; in: "Pumped storage in the context of renewable energy supply",
(2012),
ISBN: 978-3-9501937-8-7;
S. 495
- 503.
R. Willinger, A. Lashofer:
"Hydropower Screw and Overshot Water Wheel in the Cordier-Diagram";
Vortrag: 18th International Seminar on Hydropower Plants,
Laxenburg;
26.11.2014
- 28.11.2014; in: "18. International Seminar on Hydropower Plants - Innovations and Development Needs for Sustainable Growth of Hydropower",
(2014),
ISBN: 978-3-9501937-9-4;
S. 91
- 102.
R. Willinger, M. Pikbougoum:
"Effect of Partial Admission on the Flow Field in the Wheel Chamber of an Industrial Steam Turbine";
Vortrag: 6th European Conference on Turbomachinery - Fluid Dynamics and Thermodynamics,
Lille, France;
07.03.2005
- 11.03.2005; in: "Conference Proceedings",
(2005),
S. 436
- 448.
F. Wingelhofer:
"Biomasseverstromung mittels direkt gefeuerter Gasturbine zur Nutzung regenerativer Energiequellen";
Vortrag: 5. Internationale Energiewirtschaftstagung an der TU Wien - IEWT 2007,
Wien;
14.02.2007
- 16.02.2007; in: "IEWT 2007",
(2007),
12 S.
F. Wingelhofer:
"Concept and First Operational Experiences of a Directly Wood Particle Fired Gas Turbine";
Vortrag: Days of Combustion 2004,
Brno, Czech Republic;
02.06.2004
- 03.06.2004; in: "Proceedings of the International Conference",
(2004),
ISBN: 80-214-2650-0;
S. 93
- 98.
F. Wingelhofer:
"Die direkt holzstaubgefeuerte Gasturbine als innovatives Konzept zur Nutzung regenerativer Energien";
Poster: 15. Symposium BIOENERGIE - Festbrennstoffe, Flüssigkraftstoffe, Biogas,
Kloster Banz, Bad Staffelstein, Deutschland;
23.11.2006
- 24.11.2006; in: "15. Symposium BIOENERGIE - Festbrennstoffe, Flüssigkraftstoffe, Biogas",
(2006),
ISBN: 3-934681-49-2;
S. 92
- 97.
F. Wingelhofer:
"Directly Wood Particle Fired Gas Turbine Plants: Concept, Experimental Results and Potential Applications for Combined Heat and Power Generation with Moderate Output";
Vortrag: 15th European Biomass Conference,
Berlin;
07.05.2007
- 11.05.2007; in: "Proceedings",
(2007),
ISBN: 3-936338-21-3;
9 S.
F. Wingelhofer:
"Experiences with Wood Particles as Regenerative Fuel for Directly Fired Gas Turbines of the Small Power Range";
Vortrag: CIMAC Congress 2007,
Vienna;
21.05.2007
- 24.05.2007; in: "Proceedings",
(2007),
Paper-Nr. 10,
10 S.
F. Wingelhofer, B. Glöckl:
"A Numerical Simulation of the Dynamic Behaviour of a Directly Wood Particle Fired Gas Turbine";
Vortrag: 5th MATHMOD VIENNA,
Wien;
08.02.2006
- 10.02.2006; in: "Proceedings",
(2006),
ISBN: 3-901608-30-3;
10 S.
F. Wingelhofer, H. Haselbacher:
"New Optimization Criteria for the Design of Three-Dimensional Bladings Applied to Compound Lean Nozzles of an Axial Turbine";
Vortrag: ASME TURBO EXPO 2004,
Vienna;
14.06.2004
- 17.06.2004; in: "Proceedings of ASME TURBO EXPO 2004",
(2004),
Paper-Nr. GT2004-53830,
8 S.
F. Wingelhofer, H. Haselbacher:
"Numerical Comparison of the Flow Through an Axial Turbine Stage with Different Stator Bladings: Cylindrical Nozzles vs. Compound Lean Nozzles";
Vortrag: 5th European Conference on Turbomachinery - Fluid Dynamics and Thermodynamics,
Prague, Czech Republic;
17.03.2003
- 22.03.2003; in: "Conference Proceedings",
(2003),
S. 1039
- 1048.
F. Wingelhofer, H. Haselbacher:
"Numerical Study of the Influence of Compound Lean Nozzles on the Flow Through an Axial Turbine Cascade";
Vortrag: International Conference SYMKOM'02 (Compressor & Turbine Stage Flow Path Theory, Experiment & User Verification),
Lodz, Poland;
23.10.2002
- 25.10.2002; in: "Turbomachinery No. 122",
(2002),
S. 149
- 158.
