Publikationsliste für Angehörige von
E308 - Institut für Werkstoffwissenschaft und Werkstofftechnologie
als Autorinnen / Autoren bzw. wesentlich beteiligte Personen
3490 Datensätze (1993 - 2022)
Die Publikationen der Fakultät für Maschinenwesen und Betriebswissenschaften sind erst ab dem Jahr 2002 vollzählig in der Publikationsdatenbank enthalten. Publikationen aus den Jahren vor 2002 können, müssen aber nicht in der Datenbank vorhanden sein.
Bücher und Buch-Herausgaben
V. Archodoulaki:
"Eigenschaftsänderungen von Polyoxymethylenen induziert durch Verarbeitung, Alterung und Recycling";
VDI Verlag GmbH,
Düsseldorf,
2005,
ISBN: 3-18-370505-2;
232 S.
F. Berto, B. van Hoorweder, F. Iacoviello, J. Stampfl, L. Susmel, J. Torgersen:
"The second European Conference on the Structural Integrity of Additively Manufactured Materials";
in Buchreihe "Procedia Structural Integrity",
Buchreihen-Herausgeber: F. Iacoviello;
herausgegeben von: ESIS;
Elsevier,
2021,
ISSN: 2452-3216,
274 S.
H.P. Degischer (Hrg.):
"Verbundwerkstoffe";
Wiley-VCH,
Weinheim,
2003,
ISBN: 3-527-30762-1;
959 S.
H.P. Degischer, B. Kriszt (Hrg.):
"Handbook of Cellular Metals";
Wiley-VCH,
Weinheim,
2002,
ISBN: 3-527-30339-1;
373 S.
H.P. Degischer, S. Lüftl (Hrg.):
"Leichtbau - Prinzipien, Werkstoffauswahl und Fertigungsvarianten";
Wiley-VCH,
Weinheim,
2009,
ISBN: 978-3-527-32372-2;
394 S.
K. Ehrmann, H.R.M. Khosravi, G. Artner, P. Hans, H. Krebs, A. Shahabian, D. Wipp (Hrg.):
"Proceedings VSS 2019 - Vienna young Scientists Symposium";
Book of Abstracts, Dipl.Ing. Heinz A. Krebs,
2352 Gumpoldskirchen,
2019,
ISBN: 978-3-9504017-9-0;
222 S.
W. Grellmann, S. Seidler (Hrg.):
"Kunststoffprüfung";
Carl Hanser Verlag,
München, Wien,
2005,
ISBN: 3-446-22086-0;
738 S.
W. Grellmann, S. Seidler:
"Landolt-Börnstein, Volume 6 Polymers, Subvolume A Polymer Solids and Polymer Melts, Part 3 Mechanical and Thermomechanical Properties of Polymers";
in Buchreihe "Landolt-Börnstein",
Buchreihen-Herausgeber: K. Arndt, M. Lechner;
herausgegeben von: Springer;
Springer,
Berlin,
2014,
ISBN: 978-3-642-55165-9,
524 S.
W. Grellmann, S. Seidler (Hrg.):
"Polymer Testing";
Carl Hanser Verlag,
München,
2007,
ISBN: 978-3-446-40900-2;
674 S.
D. Holec, L. Zhou, R. Rachbauer, P.H. Mayrhofer:
"Alloy-based design of materials from first principles: An application to functional hard coatings";
in Buchreihe "Density Functional Theory",
Buchreihen-Herausgeber: J. Morin, J. Pelletier;
Nova Science Publishers, Inc,
New York,
2013,
ISBN: 978-1-62417-955-6,
26 S.
T. Koch:
"Morphologie und Mikrohärte von Polypropylen-Werkstoffen";
Mensch & Buch Verlag,
Berlin,
2005,
ISBN: 3-89820-854-0;
134 S.
E. Kozeschnik:
"Modeling Solid-State Precipitation";
Momentum Press, LLC,
New York,
2013,
ISBN: 978-1-60650-062-0;
464 S.
F. Lasagni:
"The role of Si on the microstructure of Al casting alloys and short fibre composites";
Shaker,
Aachen,
2008,
ISBN: 978-3-8322-6833-6;
152 S.
S. Lüftl (Hrg.):
"Leichtbau: Prinzipien, Werkstoffauswahl und Fertigungsvarianten (Seminarunterlagen zum Seminar Leichtbau, 12.-13-04.2007, Ranshofen)";
Institut für Werkstoffwissenschaft,
2007,
400 S.
A. Ovsianikov, J. Yoo, V. Mironov (Hrg.):
"3D Printing and Biofabrication";
Springer International Publishing,
Switzerland,
2018,
ISBN: 978-3-319-45445-0.
A. Pyzalla, A. Borbély, H.P. Degischer (Hrg.):
"Stress Evaluation in Materials Using Neutrons and Synchrotron Radiation - MECA SENS IV. Materials Science Forum, Volumes 571-572";
Trans Tech Publications Ltd.,
Schweiz,
2008,
ISBN: 978-0-87849-393-7;
432 S.
R. Radis (Hrg.):
"Nickelbasis Superlegierung UDIMET 720 Li - Entstehung Mono- und Multimodaler Ausscheidungsverteilungen von Gamma Strich";
VDM Verlag,
Saarbrücken, Deutschland,
2010,
ISBN: 978-3-639-31252-2;
217 S.
R. Radis:
"Numerical Simulation of the Precipitation Kinetics of Nitrides and Carbides in Microalloyed Steel";
Verlag der Technischen Universität Graz,
Graz,
2010,
ISBN: 978-3-85125-123-4;
157 S.
M. Schöbel (Hrg.):
"Residual Stresses and Thermal Fatigue in Metal Matrix Composites";
SVH - Südwestdeutscher Verlag für Hochschulschriften,
Heinrich-Böcking-Str. 6-8, 66121 Saarbrücken, Deutschland,
2011,
ISBN: 978-3-8381-2899-3;
132 S.
C. Sommitsch, M. Ionescu, B. Mishra, E. Kozeschnik, T. Chandra (Hrg.):
"THERMEC 2016 (Materials Science Forum Vol. 879)";
Trans Tech Publications Ltd.,
2017,
ISBN: 978-3-0357-1129-5;
2720 S.
J. Stampfl, R. Liska, A. Ovsianikov (Hrg.):
"Multiphoton Lithography: Techniques, Materials and Applications";
Wiley-VCH,
Boschstraße 12, 69469 Weinheim Deutschland,
2016,
ISBN: 978-3-527-33717-0;
408 S.
Zeitschriftenartikel
R. Abart, J. Svoboda, P Jerabek, E. Povoden-Karadeniz, G Habler:
"Kinetics of layer growth in a binary system with intermediate solid-solution and interfaces with finite mobility acting as non-ideal sources and sinks for vacancies: thermodynamic model and application to magnesio-aluminate spinel layer growth";
American Journal of Science,
316
(2016),
S. 309
- 328.
M. Ahmadi, M. Rath, E. Povoden-Karadeniz, S. Primig, A. Danninger, M. Stockinger, E. Kozeschnik:
"Modeling of precipitation strengthening in Inconel 718 including non-spherical γ″ precipitates";
Modelling and Simulation in Materials Science and Engineering,
25
(2017),
5, paper 055005;
S. 2
- 17.
M.R. Ahmadi, E. Povoden-Karadeniz, K. Öksüz, A. Falahati, E. Kozeschnik:
"A model for precipitation strengthening in multi-particle systems";
Computational Materials Science,
91
(2014),
S. 173
- 186.
M.R. Ahmadi, E. Povoden-Karadeniz, B. Sonderegger, K. Öksüz, A. Falahati, E. Kozeschnik:
"A model for coherency strengthening of large precipitates";
Scripta Materialia,
84-85
(2014),
S. 47
- 50.
M.R. Ahmadi, E. Povoden-Karadeniz, L.C. Whitmore, M. Stockinger, A. Falahati, E. Kozeschnik:
"Yield strength prediction in Ni-base alloy 718Plus based on thermo-kinetic precipitation simulation";
Materials Science and Engineering A,
608
(2014),
S. 114
- 122.
M.R. Ahmadi, B. Sonderegger, E. Povoden-Karadeniz, A. Falahati, E. Kozeschnik:
"Precipitate strengthening of non-spherical precipitates extended in < 100 > or {100} direction in fcc crystals";
Materials Science and Engineering A,
590
(2014),
S. 262
- 266.
M.R. Ahmadi, L.C. Whitmore, E. Povoden-Karadeniz, M. Stockinger, A. Falahati, E. Kozeschnik:
"Simulation of yield strength in AllvacR 718PlusTM";
Advanced Materials Research,
922
(2014),
S. 7
- 12.
A. Ajami, P. Gruber, M. Tromayer, W. Husinsky, J. Stampfl, R. Liska, A. Ovsianikov:
"Evidence of concentration dependence of the two-photon absorption cross section: Determining the ``true´´ cross section value";
Optical Materials,
47
(2015),
S. 524
- 529.
A. Ajami, W. Husinsky, A. Ovsianikov, R. Liska:
"Dispersive white light continuum single Z-scan for rapid determination of degenerate two-photon absorption spectra";
Applied Physics B - Lasers and Optics,
124 (7)
(2018),
S. 14201
- 14210.
A. Ajami, W. Husinsky, M. Tromayer, P. Gruber, R. Liska, A. Ovsianikov:
"Measurement of degenerate two-photon absorption spectra of a series of developed two-photon initiators using a dispersive white light continuum Z-scan";
Applied Physics Letters,
111
(2017),
S. 0719011
- 0719014.
R. Alessandro, M. Merola, P. Carlone, V. Archodoulaki:
"Tribo-mechanical characterization of reinforced epoxy resin under dry and lubricated contact conditions";
Composites - Part B: Engineering,
79
(2015),
S. 595
- 603.
M. Alimardani, M. Razzaghi-Kashani, T. Koch:
"Crack growth resistance in rubber composites with controlled interface bonding and interphase content";
Journal of Polymer Research,
26
(2019),
47;
S. 1
- 9.
D. Anghelina, R. Kienreich, S. Zamberger, J. Zamberger, E. Kozeschnik, R. Schneider:
"Kinetics and control of scaling for reduced surface decarburization of spring steels";
Metalurgia International,
15
(2010),
S. 5
- 8.
F. Appel, D Herrmann, F.D. Fischer, J. Svoboda, E. Kozeschnik:
"Role of vacancies in work hardening and fatigue of TiAl alloys";
International Journal of Plasticity,
42
(2013),
S. 83
- 100.
V. Archodoulaki, M. Jones:
"Recycling viability: A matter of numbers";
Resources, Conservation and Recycling,
168
(2021),
S. 1
- 2.
V. Archodoulaki, T. Koch, A. Rodriguez, S. Seidler:
"Influence of different sterilization procedures on the morphological parameters and mechanical properties of ultra-high-molecular-weight polyethylene";
Journal of Applied Polymer Science,
120
(2011),
4;
S. 1875
- 1884.
V. Archodoulaki, S. Lüftl, T. Koch, S. Seidler:
"Property changes in polyoxymethylene (POM) resulting from processing, ageing and recycling";
Polymer Degradation and Stability,
Vol. 92
(2007),
12;
S. 2181
- 2189.
V. Archodoulaki, S. Lüftl, S. Seidler:
"Degradation Behavior of Polyoxymethylene: Influence of Different Stabilizer Packages";
Journal of Applied Polymer Science,
Vol. 105
(2007),
6;
S. 3679
- 3688.
V. Archodoulaki, S. Lüftl, S. Seidler:
"Effects of Coloration on the Physical and Mechanical Properties and on the Thermal Stability of Polyoxymethylene";
Advances in Polymer Technology,
25
(2006),
1;
S. 63
- 72.
V. Archodoulaki, S. Lüftl, S. Seidler:
"Oxidation induction time studies on the thermal degradation behaviour of polyoxymethylene";
Polymer Testing,
25
(2006),
S. 83
- 90.
V. Archodoulaki, S. Lüftl, S. Seidler:
"Stabiliser consumption of polyoxymethylene investigated by means of the pressure oxidative induction time method";
Polymer Testing,
27/2
(2007),
S. 234
- 242.
V. Archodoulaki, S. Lüftl, S. Seidler:
"Thermal degredation behaviour of poly(oxymethylene): 1. Degradation and stabilizer consumption";
Polymer Degradation and Stability,
86
(2004),
S. 75
- 83.
A. Arslan, W. Steiger, P. Roose, H. Van den Bergen, P. Gruber, E. Zerobin, F. Gantner, O. Guillaume, A. Ovsianikov, S. van Vlierberghe, P. Dubruel:
"Polymer architecture as key to unprecedented high-resolution 3D-printing performance: The case of biodegradable hexa-functional telechelic urethane-based poly-ε-caprolactone";
Materials Today,
44
(2021),
April;
S. 25
- 39.
A. Arslan, K. Vanmol, A. Dobos, A. Natale, J. Van Hoorick, P. Roose, H. Van den Bergen, T. Chalyan, A. Ovsianikov, S. Baudis, V. Rogiers, T. Vanhaecke, R. Rodrigues, H. Thienpont, J. Van Erps, S. Van Vlierberghe, P. Dubruel:
"Increasing the Microfabrication Performance of Synthetic Hydrogel Precursors through Molecular Design";
Biomacromolecules,
22
(2021),
12;
14 S.
H. Asanuma, F. Klimashin, P. Polcik, S. Koloszvári, H. Riedl, P.H. Mayrhofer:
"Thermomechanical properties and oxidation resistance of Ce-Si alloyed Ti-Al-N thin films";
Vacuum,
166
(2019),
0042-207X;
S. 231
- 238.
H. Asanuma, F. Klimashin, P. Polcik, S. Kolozsvári, H. Riedl, P.H. Mayrhofer:
"Hard Ti-Al-N endowed with high heat-resistance through alloying with Ta and Ce";
Surface & Coatings Technology,
372
(2019),
0257-8972;
S. 26
- 33.
H. Asanuma, F. Klimashin, P. Polcik, S. Kolozsvári, H. Riedl, P.H. Mayrhofer:
"Impact of lanthanum and boron on the growth, thermomechanical properties and oxidation resistance of Ti-Al-N thin films";
Thin Solid Films,
688
(2019),
137239;
S. 1
- 8.
H. Asanuma, P. Polcik, S. Kolozsvári, F. Klimashin, H. Riedl, P.H. Mayrhofer:
"Cerium doping of Ti-Al-N coatings for excellent thermal stability and oxidation resistance";
Surface & Coatings Technology,
Part A
(2017),
326;
S. 165
- 172.
E. Aschauer, M. Bartosik, H. Bolvardi, M. Arndt, P. Polcik, A Davydok, C. Krywka, H. Riedl, P.H. Mayrhofer:
"Strain and stress analyses on thermally annealed Ti-Al-N/Mo-Si-B multilayer coatings by synchrotron X-ray diffraction";
Surface & Coatings Technology,
361
(2019),
0257-8972;
S. 364
- 370.
E. Aschauer, H. Riedl, C.M. Koller, H. Bolvardi, M. Arndt, P. Polcik, P.H. Mayrhofer:
"Adhesive wear formation on PVD coated tools applied in hot forming of Al-Si coated steel sheets";
Wear,
430-431
(2019),
0043-1648;
S. 309
- 316.
E. Aschauer, S. Sackl, T. Schachinger, H. Bolvardi, M. Arndt, P. Polcik, H. Riedl, P.H. Mayrhofer:
"Atomic scale investigations of thermally treated nano-structured Ti-Al-N/ Mo-Si-B multilayers";
Surface & Coatings Technology,
349
(2018),
S. 480
- 487.
E. Aschauer, S. Sackl, T. Schachinger, T. Wojcik, H. Bolvardi, M. Arndt, P. Polcik, H. Riedl, P.H. Mayrhofer:
"Nano-structural investigation of Ti-Al-N/Mo-Si-B multilayer coatings: A comparative study by APT and HR-TEM";
Vacuum,
157
(2018),
S. 173
- 179.
E. Aschauer, T. Wojcik, P. Polcik, O Hunold, M. Arndt, V. Dalbauer, P.H. Mayrhofer, P. Felfer, H. Riedl:
"Ultra-High Oxidation Resistance of Nano Structured Thin Films";
SSRN,
1
(2020),
1;
35 S.
E. Aschauer, T. Wojcik, P. Polcik, O Hunold, M. Arndt, V. Dalbauer, P.H. Mayrhofer, P. Felfer, H. Riedl:
"Ultra-high oxidation resistance of nano-structured thin films";
Materials & Design,
201
(2021),
109499;
S. 1
- 11.
Z. Asghar, G. Requena:
"Three dimensional post-mortem study of damage after compression of cast Al-Si alloys";
Materials Science and Engineering A,
591
(2014),
-;
S. 136
- 143.
Z. Asghar, G. Requena, E. Boller:
"3D interpenetrating hybrid network of rigid phases in an AlSi10Cu5NiFe piston alloy";
Praktische Metallographie - Practical Metallography,
XLVII
(2010),
9;
S. 471
- 486.
Z. Asghar, G. Requena, E. Boller:
"Three-dimensional rigid multiphase networks providing high-temperature strength to cast AlSi10Cu5Ni1-2 piston alloys";
Acta Materialia,
59
(2011),
16;
S. 6420
- 6432.
Z. Asghar, G. Requena, H.P. Degischer, P. Cloetens:
"Three-dimensional study of Ni aluminides in an AlSi12 alloy by means of light optical and synchrotron microtomography";
Acta Materialia,
57
(2009),
S. 4125
- 4132.
Z. Asghar, G. Requena, F. Kubel:
"The role of Ni and Fe aluminides on the elevated temperature strength of an AlSi12 alloys";
Materials Science and Engineering A,
527
(2010),
S. 5691
- 5698.
Z. Asghar, G. Requena, G. Zahid, R. Rafi-Ud-Din:
"Effect of thermally stable Cu- and Mg-rich aluminides on the high temperature strength of an AlSi12CuMgNi alloy";
Materials Characterization,
88
(2014),
S. 80
- 85.
K. Aßmus, W. Hübner, A. Pyzalla, H. Pinto:
"Die Entwicklung des Gefüges in der Verschleißspur bei Gleitverschleiß von FeCrNi-Legierungen";
Tribologie und Schmierungstechnik,
51
(2004),
3;
S. 30
- 33.
A. Azizpour, R Hahn, F. Klimashin, T. Wojcik, E. Poursaeidi, P.H. Mayrhofer:
"Deformation and Cracking Mechanism in CrN/TiN Multilayer Coatings";
Coatings,
9
(2019),
363;
17 S.
N. Babscan, D. Leitlmeier, H.P. Degischer:
"Foamability of Particle Reinforced Aluminium Melts";
Materialwissenschaften und Werkstofftechnik,
34
(2003),
S. 22
- 29.
N. Babscan, D. Leitlmeier, H.P. Degischer, J. Banhart:
"The Role of Oxidation in Blowing Particle-Stabilised Aluminium Foams";
Advanced Materials,
6
(2004),
6;
S. 421
- 428.
A. Bachmaier, G. Rathmayr, M. Bartosik, D. Apel, Z. Zhang, R. Pippan:
"New insights on the formation of supersaturated solid solutions in the Cu-Cr system deformed by high-pressure torsion";
Acta Materialia,
69
(2014),
S. 301
- 313.
M. Bahmani-Oskooee, S. Hossein Nedjad, A. Samadi, E. Kozeschnik:
"Cu-bearing, martensitic stainless steels for applications in biological environments";
Materials & Design,
130
(2017),
S. 442
- 451.
A. Bahr, T. Glechner, T. Wojcik, A Kirnbauer, M. Sauer, A. Foelske-Schmitz, O Hunold, J. Ramm, S. Kolozsvári, E. Ntemou, E. Pitthan, D. Primetzhofer, R Hahn:
"Non-reactive HiPIMS deposition of NbCx thin films: Effect of the target power density on structure-mechanical properties";
Surface & Coatings Technology,
444
(2022),
S. 128674-1
- 128674-10.
M. Balog, J. Nagy, F. Simancik, K. Izdinsky, G. Requena:
"HEAT RESISTANT ULTRA-FINE GRAINED Al PROFILES";
Reviews on Advanced Materials Science,
18
(2008),
S. 415
- 421.
M. Balog, C. Poletti, F. Simancik, M. Walcher, W. Rajner:
"The effect of native Al2O3 skin disruptionon properties of fine Al powder compacts";
Journal of Alloys and Compounds,
509
(2011),
509;
S. 235
- 238.
M. Balog, F. Simancik, O. Bajana, G. Requena:
"ECAP vs. direct extrusion-Techniques for consolidation of ultra-fine Al particles";
Materials Science and Engineering A,
504
(2009),
1-2;
S. 1
- 7.
P. Barriobero Vila, V. Biancardi Oliveira, S. Schwarz, T. Buslaps, G. Requena:
"Tracking the αʺ martensite decomposition during continuous heating of a Ti-6Al-6V-2Sn alloy";
Acta Materialia,
135
(2017),
S. 132
- 143.
P. Barriobero Vila, J. Gussone, J. Haubrich, S. Sandlöbes, J. da Silva, P. Cloetens, N. Schell, G. Requena:
"Inducing Stable α + β Microstructures during Selective Laser Melting of Ti-6Al-4V Using Intensified Intrinsic Heat Treatments";
Materials,
10
(2017),
268;
S. 1
- 15.
P. Barriobero Vila, G. Requena, T. Buslaps, M. Alfeld, U. Boesenberg:
"Role of element partitioning on the α-β phase transformation kinetics of a bi-modal Ti-6Al-6V-2Sn alloy during continuous heating";
Journal of Alloys and Compounds,
626
(2015),
S. 330
- 339.
P. Barriobero Vila, G. Requena, S. Schwarz, F. Warchomicka, T. Buslaps:
"Influence of phase transformation kinetics on the formation of α in a β-quenched Ti-5Al-5Mo-5V-3Cr-1Zr alloy";
Acta Materialia,
95
(2015),
S. 90
- 101.
P. Barriobero Vila, G. Requena, F. Warchomicka, A. Stark, N. Schell, T. Buslaps:
"Phase transformation kinetics during continuous heating of a β-quenched Ti-10V-2Fe-3Al alloy";
Journal of Materials Science,
50
(2015),
3;
S. 1412
- 1426.
M. Bartl, S. Puls, J. Tang, H. Lichtenegger, G. D. Stucky:
"Cubic Mesoporous Frameworks with a Mixed Semiconductor Nanocrystalline Wall Structure and Enhanced Sensitivity to Visible Light";
Angewandte Chemie - International Edition,
43
(2004),
S. 3037
- 3040.
M. Bartosik, M. Arndt, R. Rachbauer, C. Krywka, C.M. Koller, J. Keckes, P.H. Mayrhofer:
"Cross-sectional X-ray nano-diffraction and -reflectivity analysis of multilayered AlTiN-TiSiN thin films: Correlation between residual strain and bi-layer period";
Scripta Materialia,
107
(2015),
S. 153
- 156.
M. Bartosik, H. J. Böhm, C. Krywka, Z. Zhang, P.H. Mayrhofer:
"Influence of Phase Transformation on the Damage Tolerance of Ti-Al-N Coatings";
Vacuum,
155
(2018),
S. 153
- 157.
M. Bartosik, R. Daniel, C. Mitterer, I. Matko, M. Burghammer, P.H. Mayrhofer, J. Keckes:
"Cross-sectional X-ray nanobeam diffraction analysis of a compositionally graded CrNx thin film";
Thin Solid Films,
542
(2013),
S. 1
- 4.
M. Bartosik, R Hahn, Z. Zhang, I. Ivanov, M. Arndt, P. Polcik, P.H. Mayrhofer:
"Fracture toughness of Ti-Si-N thin films";
International Journal of Refractory Metals & Hard Materials,
72
(2018),
S. 78
- 82.
M. Bartosik, D. Holec, D. Apel, M. Klaus, C. Genzel, J. Keckes, M. Arndt, P. Polcik, C.M. Koller, P.H. Mayrhofer:
"Thermal expansion of Ti-Al-N and Cr-Al-N coatings";
Scripta Materialia,
127
(2017),
S. 182
- 185.
M. Bartosik, J. Keckes, P.O.A. Persson, H. Riedl, P.H. Mayrhofer:
"Interface controlled microstructure evolution in nanolayered thin films";
Scripta Materialia,
123
(2016),
123;
S. 13
- 16.
M. Bartosik, C. Rumeau, R Hahn, Z. Zhang, P.H. Mayrhofer:
"Fracture toughness and structural evolution in the TiAlN system upon annealing";
Scientific Reports,
7
(2017),
16476;
S. 1
- 9.
M. Bartosik, M. Todt, D. Holec, J. Todt, Z. Zhang, L. Zhou, H. Riedl, H. J. Böhm, F. G. Rammerstorfer, P.H. Mayrhofer:
"Thermal Expansion of Rock-Salt Cubic AlN";
Applied Physics Letters,
107
(2015),
071602.
S. Baudis, D. Bomze, M. Markovic, P. Gruber, A. Ovsianikov, R. Liska:
"Modular Material System for the Microfabrication of Biocompatible Hydrogels Based on Thiol-Ene-Modified Poly(vinyl alcohol)";
Journal of Polymer Science Part A: Polymer Chemistry,
54
(2016),
13;
S. 2060
- 2070.
S. Baudis, C. Heller, R. Liska, J. Stampfl, H. Bergmeister, G. Weigel:
"(Meth)acrylate-based photoelastomers as tailored biomaterials for artificial vascular grafts";
Journal of Polymer Science Part A: Polymer Chemistry,
47
(2009),
10;
S. 2664
- 2676.
S. Baudis, F. Nehl, S. Ligon, A. Nigisch, H. Bergmeister, D. Bernhard, J. Stampfl, R. Liska:
"Elastomeric degradable biomaterials by photopolymerization-based CAD-CAM for vascular tissue engineering";
Biomedical Materials,
6
(2011),
5.
S. Baudis, B. Steyrer, T. Pulka, H. Wilhelm, G. Weigel, H. Bergmeister, J. Stampfl, R. Liska:
"Photopolymerizable Elastomers for Vascular Tissue Regeneration";
Macromolecular Symposia,
296
(2010),
1;
S. 121
- 126.
S. Baumgartner, R. Gmeiner, J.-A. Schönherr, J. Stampfl:
"Stereolithography-based additive manufacturing of lithium disilicate glass ceramic for dental applications";
Materials Science & Engineering C - Materials for Biological Applications,
Volume 116
(2020),
111180.
S. Benedikt, J. Wang, M. Markovic, N. Moszner, K. Dietliker, A. Ovsianikov, H. Grützmacher, R. Liska:
"Highly efficient water-soluble visible light photoinitiators";
Journal of Polymer Science Part A: Polymer Chemistry,
53
(2015),
24.
H. Berns, A. Pyzalla:
"Microstructure and Residual Stresses of Stainless Steels Case Hardened with Nitrogen";
Surface Engineering,
20
(2004),
6;
S. 459
- 463.
H. Birkedal, R. Khan, N. Slack, C. Broomell, H. Lichtenegger, F. Zok, J.H. Waite:
"Halogenated Veneers: Protein Cross-Linking and Halogenation in the Jaws of Nereis, a Marine Polychaete Worm";
ChemBioChem,
7
(2006),
9;
S. 1392
- 1399.
A. Blutmager, T Spahn, M. Varga, W Friesenbichler, H. Riedl, P.H. Mayrhofer:
"Processing Fiber‐Reinforced Polymers: Specific Wear Phenomena Caused by Filler Materials";
Polymer Engineering and Science,
60
(2020),
1;
S. 78
- 85.
H. J. Böhm, H.P. Degischer, W. Lacom:
"Experimental and Theoretical Study of the Thermal Expansion Behavior of Ceramic Fiber Reinforced Aluminium;";
Composites Engineering,
5
(1995),
1;
S. 37
- 49.
P. Bohaty, B. Vlach, S. Seidler, T. Koch, E. Nezbedov:
"Essential Work of Fracture and the Phase Transformation in β-IPP";
Journal of Macromolecular Science,
Part B - Physics
(2002),
Vol. B41, Nos. 4-6;
S. 657
- 669.
D. Bomze, P. Knaack, T. Koch, H. Jin, R. Liska:
"Radical induced cationic frontal polymerization as a versatile tool for epoxy curing and composite production";
Journal of Polymer Science Part A: Polymer Chemistry,
54
(2016),
23;
S. 3751
- 3759.
A.H. Bork, E. Povoden-Karadeniz, A. Carrillo, J.L.M. Rupp:
"Thermodynamic Assessment of the Solar-to-Fuel Performance of La0.6Sr0.4Mn1-yCryO3-σ Perovskite Solid Solution Series";
Acta Materialia,
178
(2019),
1;
S. 163
- 172.
A.H. Bork, E. Povoden-Karadeniz, J.L.M. Rupp:
"Modeling thermochenmical solar-to-fuel conversion: CALPHAD for thermdynamic assessment studies of perovskite, exemplified for (La,Sr)MnO3";
Advanced Energy Materials,
1601086
(2016).
G. Bruno, H. Pinto:
"Precipitation kinetics of γ´ phase in nickel base superalloy SC16: An in situ neutron diffraction study";
Materials Science and Technology,
19
(2003),
S. 567
- 572.
G. Bruno, G. Schumacher, H. Pinto, C. Schulze:
"Measurement of the Littice Misfit of the Nickel-Base Superalloy SC16 by High-Energy Synchrotron Radiation";
Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science,
34A
(2003),
S. 193
- 197.
M.M. Bruno, N.G. Cotella, M.C. Miras, T. Koch, S. Seidler, C Barbero:
"Characterization of monolithic porous carbon prepared from resorcinol/formaldehyde gels with cationic surfactant";
Colloids and Surfaces, A: Physicochemical and Engineering Aspects,
358
(2010),
1-3;
S. 13
- 20.
J. Buchinger, N. Koutná, Z. Chen, Z. Zhang, P.H. Mayrhofer, D. Holec, M. Bartosik:
"Toughness enhancement in TiN/WN superlattice thin films";
Acta Materialia,
172
(2019),
S. 18
- 29.
J. Buchinger, L. Löfler, J. Ast, A. Wagner, Z. Chen, J. Michler, Z. Zhang, P.H. Mayrhofer, D. Holec, M. Bartosik:
"Fracture properties of thin film TiN at elevated temperatures";
Materials & Design,
194
(2020),
108885.
J. Buchinger, A. Wagner, Z. Chen, Z. Zhang, D. Holec, P.H. Mayrhofer, M. Bartosik:
"Fracture toughness trends of modulus-matched TiN/(Cr,Al)N thin film superlattices";
Acta Materialia,
202
(2021),
S. 376
- 386.
B. Buchmayr, J. Stampfl:
"MAMC 2014: Vienna´s Metal AM Conference reports on progress in a rapidly changing industry";
Metal Additive Manufacturing,
1
(2015),
1;
S. 53
- 60.
K. Bugelnig, F. Sket, H. Germann, T. Steffens, R. Koos, F. Wilde, E. Boller, G. Requena:
"Influence of 3D connectivity of rigid phases on damage evolution during tensile deformation of an AlSi12Cu4Ni2 piston alloy";
Materials Science and Engineering A,
709
(2018),
S. 193
- 202.
K. Bugelnig, F. Sket, H. Germann, T. Steffens, F. Wilde, E. Boller, G. Requena:
"3D microstructure and damage accumulation in a cast AlSi12Cu5Ni2 piston alloy as a function of solution treatment";
e-Journal of NDT,
ICT 2016
(2016),
18783;
8 S.
H. Buken, E. Kozeschnik:
"A Model for Static Recrystallization with Simultaneous Precipitation and Solute Drag";
Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science,
48A
(2017),
6;
S. 2812
- 2818.
H. Buken, E. Kozeschnik:
"State parameter-based modelling of microstructure evolution in micro-alloyed steel during hot forming";
IOP Conference Series: Materials Science and Engineering,
119
(2016),
012023;
7 S.
H. Buken, P. Sherstnev, E. Kozeschnik:
"A state parameter-based model for static recrystallization interacting with precipitation";
Modelling and Simulation in Materials Science and Engineering,
24
(2016),
S. 035006.
P Burgholzer, C Hofer, B Reitinger, A. Mohammed, H.P. Degischer, D Loidl, P. Schulz:
"Non-contact determination of elastic moduli of continuous fiber reinforced metals";
Composites Science and Technology,
65
(2005),
S. 301
- 306.
D. Burzic, J. Zamberger, E. Kozeschnik:
"Non-destructive evaluation of decarburization of spring steel using electromagnetic measurement";
Nondestructive Testing And Evaluation,
43
(2010),
S. 446
- 450.
B. Busetti, B. Steyrer, B. Lutzer, R. Reiter, J. Stampfl:
"A hybrid exposure concept for lithography-based additive manufacturing";
Additive Manufacturing,
Volume 21
(2018),
21;
S. 413
- 421.
E. Cabrol, C. Bellot, P. Lamesle, D. Delagnes, E. Povoden-Karadeniz:
"Experimental investigation and thermodynamic modeling of molybdenum and vanadium-containing carbide hardened iron-based alloys";
Journal of Alloys and Compounds,
556
(2013),
S. 203
- 209.
A. Cakara, M. Bonta, H. Riedl, P.H. Mayrhofer, A. Limbeck:
"Development of a multi-variate calibration approach for quantitative analysis of oxidation resistant Mo-Si-B coatings using laser ablation inductively coupled plasma mass spectrometry";
Spectrochimica Acta Part B,
120
(2016),
S. 57
- 62.
S. Cha, S. Hong, M. Kim, J. Park, W. Jung, M. Rath, E. Kozeschnik:
"CALPHAD-based alloy design for advanced automotive steels - Part II: Compositional and microstructural modification for advanced carburizing steels";
CALPHAD - Computer Coupling of Phase Diagrams and Thermochemistry,
54
(2016),
S. 172
- 180.
V. Chawla, D. Holec, P.H. Mayrhofer:
"Stabilization criteria for cubic AlN in TiN/AlN and CrN/AlN bi-layer systems";
Journal of Physics D: Applied Physics,
46
(2013),
045305;
S. 1
- 8.
V. Chawla, D. Holec, P.H. Mayrhofer:
"The effect of interlayer composition and thickness on the stabilization of cubic AlN in AlN/Ti-Al-N superlattices";
Thin Solid Films,
565
(2014),
S. 94
- 100.
Z. Chen, D. Holec, M. Bartosik, P.H. Mayrhofer, Z. Zhang:
"Crystallographic orientation dependent maximum layer thickness of cubic AlN in CrN/AlN multilayers";
Acta Materialia,
168
(2019),
S. 190
- 202.
Z. Chen, Q. Shao, M. Bartosik, P.H. Mayrhofer, H. Chen, Z. Zhang:
"Growth-twins in CrN/AlN multilayers induced by hetero-phase interfaces";
Acta Materialia,
185
(2020),
S. 157
- 170.
A.V. Chernogor, F. Klimashin, A.O. Volkhonskii, I.V. Blinkov, P.H. Mayrhofer:
"The impact of Ni and Mo on growth-morphology and mechanical properties of arc evapo-rated Ti-Cr-N hard coatings";
Surface & Coatings Technology,
377
(2019),
S. 124917-1
- 124917-8.
K. Cicha, T. Koch, J. Torgersen, L. Zhiquan, R. Liska, J. Stampfl:
"Young´s modulus measurement of two-photon polymerized microcantilevers by using nanoindentation equipment";
Journal of Applied Physics,
112
(2012),
094906.
K. Cicha, Z. Li, K. Stadlmann, A. Ovsianikov, R. Markut-Kohl, R. Liska, J. Stampfl:
"Evaluation of 3D structures fabricated with two-photon-photopolymerization by using FTIR spectroscopy";
Journal of Applied Physics,
110
(2011),
064911;
S. 1
- 5.
P. Colombo, H.P. Degischer:
"Highly porous metals and ceramics";
Materials Science and Technology (eingeladen),
26
(2010),
10;
S. 1145
- 1158.
R. Coppeta, D. Holec, H. Ceric, T. Grasser:
"Evaluation of Dislocation Energy in Thin Films";
Philosophical Magazine,
95
(2015),
2;
S. 186
- 209.
S. Corkovic, A. Pyzalla:
"In-situ Stress Analyses during High Temperature Oxidation of Mild Steel and Grey Cast Iron";
Materials and Corrosion,
55
(2004),
5;
S. 341
- 351.
J. Crespo Casanova, G. Requena, H.P. Degischer, K. Track, D. Tolnai:
"Three-dimensional characterisation of micropores and graphite nodules in ductile cast iron";
International Foundry Research,
65
(2013),
3;
S. 24
- 30.
V. Dalbauer, S. Kolozsvári, J. Ramm, C.M. Koller, P.H. Mayrhofer:
"In-situ XRD studies of arc evaporated Al-Cr-O coatings during oxidation";
Surface & Coatings Technology,
358
(2019),
S. 934
- 941.
V. Dalbauer, S. Kolozsvári, J. Ramm, C.M. Koller, P.H. Mayrhofer:
"On the oxidation behaviour of cathodic arc evaporated AleCr and Al-Cr-O coatings";
Vacuum,
163
(2019),
S. 1
- 9.
V. Dalbauer, J. Ramm, S. Kolozsvári, C.M. Koller, P.H. Mayrhofer:
"On the phase evolution of arc evaporated Al-Cr-based intermetallics and oxides";
Thin Solid Films,
644
(2017),
Volume 644;
S. 120
- 128.
V. Dalbauer, J. Ramm, S. Kolozsvári, V. Paneta, C.M. Koller, P.H. Mayrhofer:
"...On the phase formation of cathodic arc evaporated Al1−xCrx-based intermetallic coatings and substoichiometric oxides";
Surface & Coatings Technology,
352
(2018),
352;
S. 392
- 398.
C. Dall´Argine, A. Hochwallner, N. Klikovits, R. Liska, J. Stampfl, M. Sangermano:
"Hot‐Lithography SLA‐3D Printing of Epoxy Resin";
Macromolecular Materials and Engineering,
305
(2020),
9;
S. 1
- 6.
A. De Blas Romero, M. Pfaffinger, G. Mitteramskogler, M. Schwentenwein, C. Jellinek, J. Homa, A. Diaz Lantada, J. Stampfl:
"Lithography-based additive manufacture of ceramic biodevices with design-controlled surface topographies";
International Journal Of Advanced Manufacturing Technology,
Online
(2016),
S. 1
- 9.
H.P. Degischer, F. Lasagni:
"Enhanced Young's Modulus of Al-Si Alloys and Reinforced Matrices by Co-continuous Structures";
Journal of Composite Materials,
Vol. 44
(2010),
6;
S. 739
- 755.
S. Dépinoy, C. Toffolon-Masclet, S. Urvoy, B. Marini, F. Roch, E. Kozeschnik, A. Gourgues-Lorenzon:
"Carbide Precipitation in 2.25 Cr-1 Mo Bainitic Steel: Effect of Heating and Isothermal Tempering Conditions";
Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science,
48
(2017),
5;
S. 2164
- 2178.
S. Dieter, A. Pyzalla, A. Bauer, N. Schell, J. McCord, K. Seemann, N. Wanderka, W. Reimers:
"Correlation between magnetic properties of CoFe single and CoFe/SiO2 multi-layer thin films and their microstructure, texture and internal stress state";
Zeitschrift für Metallkunde,
95
(2004),
3;
S. 164
- 175.
M. Dikovits, C. Poletti, F. Warchomicka:
"Deformation Mechanisms in the Near-β Titanium Alloy Ti-55531";
Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science,
45
(2014),
3;
S. 1586
- 1596.
A. Dobos, F. Gantner, M. Markovic, J. Van Hoorick, L. Tytgat, S. van Vlierberghe, A. Ovsianikov:
"On-chip high-definition bioprinting of microvascular structures";
Biofabrication,
13
(2021),
1.
A. Dobos, W. Steiger, D Theiner, P. Gruber, M. Lunzer, J. Van Hoorick, S. Van Vlierberghe, A. Ovsianikov:
"Screening of two-photon activated photodynamic therapy sensitizers using a 3D osteosarcoma model";
Analyst,
144
(2019),
S. 3056
- 3063.
A. Dobos, J. Van Hoorick, W. Steiger, P. Gruber, M. Markovic, O.G. Andriotis, A. Rohatschek, P. Dubruel, P.J. Thurner, S. Van Vlierberghe, S. Baudis, A. Ovsianikov:
"Thiol-Gelatin-Norbornene Bioink for Laser-Based High-Definition Bioprinting";
Advanced Healthcare Materials,
9
(2019),
1900752.
M. Dolezal, H.P. Degischer:
"Damping behaviour of cellular aluminium compared to some commercial aluminium alloys";
Internationale Fachzeitschrift Aluminium,
79
(2003),
4;
S. 304
- 310.
B. Duscher, A. Schausberger:
"Influence of processing on the flow properties of long-chain branched polypropylene";
Polymer Engineering and Science,
58
(2018),
9;
S. 1596
- 1603.
C. Dworak, T. Koch, F. Varga, R. Liska:
"Photopolymerization of biocompatible Phosphorus-containing Vinyl esters and Vinyl carbamates";
Journal of Polymer Science Part A: Polymer Chemistry,
13
(2010),
48;
S. 2916
- 2924.
K. Ehrmann, P. Potzmann, C. Dworak, H. Bergmeister, M. Eilenberg, C. Grasl, T. Koch, H. Schima, R. Liska, S. Baudis:
"Hard Block Degradable Polycarbonate Urethanes: Promising Biomaterials for Electrospun Vascular Prostheses";
Biomacromolecules,
21
(2020),
1;
S. 376
- 387.
J. Eßmeister, M. J. Taublaender, T. Koch, D. Cerron Infantes, M. M. Unterlass, T. Konegger:
"High modulus polyimide particle-reinforcement of epoxy composites";
Materials Advances,
2
(2021),
S. 2278
- 2288.
C. Etzlstorfer, A. Leitner, E. Arenholz, E. Kozeschnik:
"Cold roll cladding of carbon steels";
Key Engineering Materials (Web-Version),
809
(2019),
S. 100
- 105.
H. Euchner, M. de Boissieu et al.:
"Lattice dynamics of the icosahedral quasicrystals i-ZnMgSc and i-ZnAgSc and the cubic 1/1-approximant Zn6Sc";
Journal of Physics: Condensed Matter,
26
(2014),
5;
S. 1
- 7.
H. Euchner, M. de Boissieu, T. Yamada et al.:
"Tetrahedron dynamics in the icosahedral quasicrystals i-MgZnSc and i-AgZnSc.";
Journal of Physics: Condensed Matter,
25
(2013),
115405.
H. Euchner, P.H. Mayrhofer:
"Designing thin film materials - ternary borides from first principles";
Thin Solid Films,
583
(2015),
S. 46
- 49.
H. Euchner, P.H. Mayrhofer:
"Vacancy dependent stability of cubic and wurtzite Ti1-xAlxN";
Surface & Coatings Technology,
275
(2015),
S. 214
- 218.
H. Euchner, P.H. Mayrhofer, H. Riedl, F. Klimashin, A. Limbeck, P. Polcik, S. Kolozsvári:
"Solid solution hardening of vacancy stabilized TixW1−xB2";
Acta Materialia,
101
(2015),
S. 55
- 61.
H. Euchner, S. Pailhès, T. Yamada, T. Tamura, I. Ishimasa, S. Rols, H. Schober, M. Mihalkovic, H. Trebin, D. Schopf, S. Paschen et al.:
"Atomic Dynamics in Complex Metallic Alloys";
MRS Proceedings,
1517
(2013).
A. Falahati, W. Jun, P. Lang, M.R. Ahmadi, E. Povoden-Karadeniz, E. Kozeschnik:
"Assessment of parameters for precipitation simulation of heat treatable aluminum alloys using differential scanning calorimetry";
Transactions of Nonferrous Metals Society of China,
24
(2014),
S. 2157
- 2167.
A. Falahati, E. Povoden-Karadeniz, P. Lang, P. Warczok, E. Kozeschnik:
"Thermo-kinetic computer simulation of differential scanning calorimetry curves of AlMgSi alloys";
International Journal of Materials Research,
Vol. 101
(2010),
9;
S. 1089
- 1096.
A. Falahati, S. Wode:
"Two dimensional thermography analysis of temperature distributions of samples in gleeble machine";
MP Materials Testing - Materials and Components, Technology and Application,
51
(2008),
03;
S. 126
- 132.
M. Fallmann, Z. Chen, Z. Zhang, P.H. Mayrhofer, M. Bartosik:
"Mechanical properties and epitaxial growth of TiN/AlN superlattices";
Surface & Coatings Technology,
375
(2019),
S. 1
- 7.
J. Farren, A. Hunter, J. Dupont, C. Robino, E. Kozeschnik, D. Seidman:
"Microstructural Evolution and Mechanical Properties of Simulated Heat-Affected Zones in an Iron-Copper Based Multicomponent Steel";
Welding Journal,
92
(2013),
5;
S. 140
- 147.
J. Farren, A. Hunter, J. Dupont, D. Seidman, C. Robino, E. Kozeschnik:
"Microstructural Evolution and Mechanical Properties of Fusion Welds in an Iron-Copper-Based Multicomponent Steel";
Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science,
43A
(2012),
S. 4155
- 4170.
K. Faure, B. Kriszt:
"Charakterisierung der Zellstruktur von metallischen Schäumen";
Praktische Metallographie - Practical Metallography,
40
(2003),
11;
S. 537
- 555.
B. Feichtenschlager, S Pabisch, J. Svehla, H. Peterlik, M Sajjad, T. Koch, G Kickelbick:
"Epoxy resin nanocomposites: The influence of interface modification on the dispersion structure - A Small-Angle-X-ray-Scattering study";
Surfaces,
3
(2020),
4;
S. 664
- 682.
R. Felzmann, S. Gruber, G. Mitteramskogler, P. Tesavibul, A. Boccaccini, R. Liska, J. Stampfl:
"Lithography-based Additive Manufacturing of Cellular Ceramic Structures";
Advanced Engineering Materials,
14
(2012),
S. 1052
- 1058.
F. Fischer, J. Svoboda, T. Antretter, E. Kozeschnik:
"Relaxation of a precipitate misfit stress state by creep in the matrix";
International Journal of Plasticity,
64
(2015),
S. 164
- 176.
F.D. Fischer, J. Svoboda, T. Antretter, E. Kozeschnik:
"Stress relaxation by power-law creep during growth of a misfitting precipitate";
International Journal of Solids and Structures,
96
(2016),
S. 74
- 80.
F.D. Fischer, J. Svoboda, F. Appel, E. Kozeschnik:
"Modeling of excess vacancy annihilation at different types of sinks";
Acta Materialia,
59
(2011),
9;
S. 3463
- 3472.
F.D. Fischer, J. Svoboda, E. Kozeschnik:
"Interstitial diffusion in systems with multiple sorts of traps";
Modelling and Simulation in Materials Science and Engineering,
21
(2013),
S. 025008
- 025020.
B. Foroughi, H.P. Degischer, A. Kottar:
"Characterization and Simulation of Tensile Deformation of Non-Uniform Cellular Aluminium Until Damage";
Advanced Engineering Materials,
15
(2013),
4;
S. 276
- 286.
A Frank, M Messiha, T. Koch, J Poduska, P Hutar, F. Arbeiter, G. Pinter:
"Correlation of the cyclic cracked round bar test and hydrostatic pressure test for unplasticized polyvinylchloride";
Polymer Testing,
75
(2021),
107125;
S. 1
- 7.
M. Friak, V. Bursíková, N. Pizůrová, J. Pavlů, V. Homola, I. Miháliková, A. Slávik, D. Holec, N. Koutná et al.:
"Elasticity of Phases in Fe-Al-Ti Superalloys: Impact of Atomic Order and Anti-Phase Boundaries";
Crystals,
9
(2019),
S. 1
- 16.
M. Friak, M. Golian, D. Holec, N. Koutná, M. Sob:
"An Ab Initio Study of Magnetism in Disordered Fe-Al Alloys with Thermal Antiphase Boundaries";
Nanomaterials,
10
(2019),
S. 1
- 17.
M. Friak, D. Lago, N. Koutná, D. Holec, T. Rebok, M. Sob:
"Multi-phase ELAStic Aggregates (MELASA) software tool for modeling anisotropic elastic properties of lamellar composites";
Computer Physics Communications,
247
(2019),
S. 1
- 9.
Ch. Fritscher, N. Hüsing, S. Bernstorff, D. Brandhuber, T. Koch, S. Seidler, H. Lichtenegger:
"In-situ SAXS study on cationic and non-ionic surfactant liquid crystals using synchrotron radiation.";
Journal of Synchrotron Radiation,
12
(2005),
S. 717
- 720.
S. Fritze, C.M. Koller, L. von Fieandt, P. Malinovskis, K. Johansson, E. Lewin, P.H. Mayrhofer, U Jansson:
"Influence of deposition temperature on the phase evolution of HfNbTiVZr high-entropy thin films";
Materials,
12
(2019),
587;
S. 01
- 08.
S. Fröhlich, V. Archodoulaki, G. Allmaier, M. Marchetti-Deschmann:
"MALDI-TOF Mass Spectrometry Imaging Reveals Molecular Level Changes in Ultrahigh Molecular Weight Polyethylene Joint Implants in Correlation with Lipid Adsorption";
Analytical Chemistry,
86
(2014),
S. 9723
- 9732.
S. Fröhlich, V. Dorrer, V. Archodoulaki, G. Allmaier, M. Marchetti-Deschmann:
"Synovial Fluid Protein Adsorbtion on Artificial, Polymer-based Hip Joint Material Investigated by MALDI-TOF Mass Spectrometry Imaging";
EuPA Open Proteomics,
4
(2014),
S. 70
- 80.
C. Fuger, R Hahn, A. Hirle, P Kutrowatz, M. Weiss, A. Limbeck, O Hunold, P. Polcik, H. Riedl:
"Revisiting the origins of super-hardness in TiB2+z thin films - Impact of growth conditions and anisotropy";
Surface & Coatings Technology,
446
(2022),
S. 128806-1
- 128806-11.
C. Fuger, R Hahn, L. Zauner, T. Wojcik, M. Weiss, A. Limbeck, O Hunold, P. Polcik, H. Riedl:
"Anisotropic super-hardness of hexagonal WB2±z thin films";
Materials Research Letters,
10
(2022),
2;
S. 70
- 77.
C. Fuger, V. Moraes, R Hahn, H. Bolvardi, P. Polcik, H. Riedl, P.H. Mayrhofer:
"Influence of Tantalum on phase stability and mechanical properties of WB2";
MRS Communications,
9
(2019),
1;
S. 375
- 380.
C. Fuger, B Schwartz, T. Wojcik, V. Moraes, M. Weiss, A. Limbeck, C Macauley, O Hunold, P. Polcik, D. Primetzhofer, P. Felfer, P.H. Mayrhofer, H. Riedl:
"Influence of Ta on the oxidation resistance of WB2-z coatings";
Journal of Alloys and Compounds,
864
(2021),
158121;
S. 1
- 9.
S. Gäbler, J. Stampfl, T. Koch, S. Seidler, G. Schüller, H. Redl, V. Juras, S. Trattnig, R. Weidisch:
"Determination of the viscoelastic properties of hydrogels based on polyethylene glycol diacrylate (PEG-DA) and human articular cartilage";
International Journal of Materials Engineering Innovation,
1
(2009),
1;
S. 3
- 20.
M Gahleitner, C Grein, R Blell, J Wolfschwenger, T. Koch, E Ingolic:
"Sterilization of propylene/ethylene random copolymers: Annealing effects on crystalline structure and transparency as influenced by polymer structure and nucleation";
Express Polymer Letters,
5
(2011),
9;
S. 788
- 798.
R. Gajic, F. Kuchar, R. Meisels, J. Radovanovic, K. Hingerl, J. Zarbakhsh, J. Stampfl, A. Woesz:
"Physical and materials aspects of photonic crystals for microwaves and millimetre waves";
Zeitschrift für Metallkunde,
95
(2004),
7;
S. 618
- 623.
P. Gauss, M. Griesser, M. Markovic, A. Ovsianikov, G. Gescheidt, P. Knaack, R. Liska:
"α-Ketoesters as Nonaromatic Photoinitiators for Radical Polymerization of (Meth)acrylates";
Macromolecules,
52
(2019),
7;
S. 2814
- 2821.
P. Gauss, S. Ligon, M. Griesser, C. Gorsche, H. Svajdlenková, T. Koch, N. Moszner, R. Liska:
"The influence of vinyl activating groups on β-allyl sulfone based chain transfer agents for tough methacrylate networks";
Journal of Polymer Science Part A: Polymer Chemistry,
54
(2016),
10;
S. 1417
- 1427.
T. Georges, C. Hackmair, H. Mayer, A. Pyzalla, H. Porzner, P. Duranton:
"Modeling Induction Heat Treating of Crankshafts";
Industrial Heating,
http://www.industrialheating.com/CDA/Archives
(2004),
August.
W. Gindl, H. Gupta, T. Schöberl, H. Lichtenegger, P. Fratzl:
"Mechanical properties of spruce wood cell walls by nanoindentation";
Applied Physics A: Materials Science & Processing,
79
(2004),
S. 2069
- 2073.
S. Gittard, B. Chen, H. Xu, A. Ovsianikov, B. Chichkov, N. Monteiro-Riviere, R. Narayan:
"The effects of geometry on skin penetration and failure of polymer microneedles";
Journal of Adhesion Science and Technology,
27
(2013),
3;
S. 227
- 243.
F Giuliani, C. Ciurea, V. Bhakhri, M Werchota, L.J. Vandeperre, P.H. Mayrhofer:
"Deformation behaviour of TiN and Ti-Al-N coatings at 295 to 573K";
Thin Solid Films,
688
(2019),
137363;
S. 01
- 07.
S.A. Glatz, H. Bolvardi, S. Kolozsvári, C.M. Koller, H. Riedl, P.H. Mayrhofer:
"Arc evaporated W-alloyed Ti-Al-N coatings for improved thermal stability, mechanical, and tribological properties";
Surface & Coatings Technology,
(2017),
SCT-22634;
S. 1.
S.A. Glatz, R. Hollerweger, P. Polcik, R. Rachbauer, J. Paulitsch, P.H. Mayrhofer:
"Thermal stability and mechanical properties of arc evaporated Ti-Al-Zr-N hard coatings";
Surface & Coatings Technology,
266
(2015),
S. 1
- 9.
S.A. Glatz, C.M. Koller, H. Bolvardi, S. Koloszvári, H. Riedl, P.H. Mayrhofer:
"Influence of Mo on the structure and the tribomechanical properties of arc evaporated Ti-Al-N";
Surface & Coatings Technology,
311
(2017),
S. 330
- 336.
S.A. Glatz, V. Moraes, C.M. Koller, H. Riedl, H. Bolvardi, S. Kolozsvári, P.H. Mayrhofer:
"Effect of Mo on the thermal stability, oxidation resistance, and tribo-mechanical properties of arc evaporated Ti-Al-N coatings";
Journal of Vacuum Science & Technology A,
35
(2017),
6;
S. 061515.
T. Glechner, A. Bahr, R Hahn, T. Wojcik, M. Heller, A Kirnbauer, J. Ramm, S. Kolozsvári, P. Felfer, H. Riedl:
"High temperature oxidation resistance of physical vapor deposited Hf-Si-B2±z thin films";
Corrosion Science,
205
(2022),
S. 110413-1
- 110413-10.
T. Glechner, R Hahn, T. Wojcik, D. Holec, S. Kolozsvári, H Zaid, S. Kodambaka, P.H. Mayrhofer, H. Riedl:
"Assessment of ductile character in superhard Ta-C-N thin films";
Acta Materialia,
179
(2019),
1359-6454;
S. 17
- 25.
T. Glechner, R Hahn, L. Zauner, S. Rißlegger, A Kirnbauer, P. Polcik, H. Riedl:
"Structure and mechanical properties of reactive and non-reactive sputter deposited WC based coatings";
Journal of Alloys and Compounds,
885
(2021),
161129;
S. 1
- 9.
T. Glechner, O Hudak, T. Wojcik, L. Haager, F. Bohrn, H. Hutter, O Hunold, J. Ramm, S. Kolozsvári, E. Pitthan, D. Primetzhofer, H. Riedl:
"Influence of the non-metal species on the oxidation kinetics of Hf, HfN, HfC, and HfB2 coatings";
Materials & Design,
211
(2021),
110136;
S. 1
- 12.
T. Glechner, S Lang, R Hahn, M Alfreider, V. Moraes, D. Primetzhofer, J. Ramm, S. Kolozsvári, D. Kiener, H. Riedl:
"Correlation between fracture characteristics and valence electron concentration of sputtered Hf-C-N based thin films";
Surface & Coatings Technology,
399
(2020),
126212;
S. 1
- 8.
T. Glechner, P.H. Mayrhofer, D. Holec, S. Fritze, E. Lewin, V. Paneta, D. Primetzhofer, S. Koloszvári, H. Riedl:
"Tuning structure and mechanical properties of Ta-C coatings by N-alloying and vacancy population";
Scientific Reports,
8
(2018),
1;
S. 17669
- 17679.
T. Glechner, H. Ömer, T. Wojcik, M. Weiss, A. Limbeck, J. Ramm, P. Polcik, H. Riedl:
"Influence of Si on the oxidation behavior of TM-Si-B2±z coatings (TM = Ti, Cr, Hf, Ta, W)";
Surface & Coatings Technology,
434
(2022),
128178;
S. 1
- 11.
T. Glechner, C. Tomastik, E. Badisch, P. Polcik, H. Riedl:
"Influence of WC/C target composition and bias potential on the structure-mechanical properties of non-reactively sputtered WC coatings";
Surface & Coatings Technology,
432
(2022),
128036;
S. 1
- 8.
R. Gmeiner, U. Deisinger, J.-A. Schönherr, B. Lechner, R. Detsch, A. Boccaccini, J. Stampfl:
"Additive Manufacturing of Bioactive Glasses and Silicate Bioceramics";
Journal of Ceramic Science and Technology,
6
(2015),
2;
S. 75
- 86.
R. Gmeiner, G. Mitteramskogler, J. Stampfl, A. Boccaccini:
"Stereolithographic Ceramic Manufacturing of High Strength Bioactive Glass";
International Journal of Applied Ceramic Technology,
12
(2015),
1;
S. 38
- 45.
U. Göbel, G. Lefranc, H.P. Degischer:
"Non-destructive Investigation of AlSi7Mg/SiC70p MMCs by means of Acoustic Scanning Microscopy, X-Ray and Neutron Diffraction";
Materialwissenschaften und Werkstofftechnik,
34
(2003),
4;
S. 375
- 380.
C. Gorsche, T. Koch, N. Moszner, R. Liska:
"Exploring the benefits of β-allyl sulfones for more homogeneous dimethacrylate photopolymer networks";
Polymer Chemistry,
6
(2015),
S. 2038
- 2047.
C. Gorsche, C. Schnöll, T. Koch, N. Moszner, R. Liska:
"Debonding on Demand with Highly Cross-Linked Photopolymers: A Combination of Network Regulation and Thermally Induced Gas Formation";
Macromolecules,
51
(2018),
3;
S. 660
- 669.
C. Gorsche, K. Seidler, P. Knaack, P. Dorfinger, T. Koch, J. Stampfl, N. Moszner, R. Liska:
"Rapid formation of regulated methacrylate networks yielding tough materials for lithography-based 3D printing";
Polymer Chemistry,
7
(2016),
11;
S. 2009
- 2014.
C. Gorsche, K. Seidler, H. Reghunathan, M. Kury, T. Koch, N. Moszner, R. Liska:
"Difunctional vinyl sulfonate esters for the fabrication of tough methacrylate-based photopolymer networks";
Polymer,
158
(2018),
S. 149
- 157.
W. Grellmann, R. Lach, S. Seidler:
"Experimental Determination of Geometry-Independent Fracture Mechanics Values J, CTOD and K for Polymers";
International Journal of Fracture, Letters in Fracture and Micromechanics,
118
(2002),
1;
S. 9
- 14.
S. Großeiber, S. Ilie, C. Poletti, B. Harrer, H.P. Degischer:
"Influence of Strain Rate on Hot Ductility of a V-Microalloyed Steel Slab";
Steel Research International,
83
(2012),
5;
S. 445
- 455.
C. Gruber, P. Raninger, A. Stanojevic, F. Godor, M. Rath, E. Kozeschnik, M. Stockinger:
"Simulation of Dynamic and Meta-Dynamic Recrystallization Behavior of Forged Alloy 718 Parts Using a Multi-Class Grain Size Model";
Materials,
14
(2021),
1, 111;
S. 1
- 15.
D. Grunenberg, K. Ehrmann, C. Gorsche, B. Steyrer, T. Koch, J. Stampfl, R. Liska:
"Heterotelechelic poly(propylene oxide) as migration-inhibited toughening agent in hot lithography based additive manufacturing";
Polymer Chemistry,
12
(2021),
9;
S. 1260
- 1272.
X. Gu, Z. Zhang, M. Bartosik, P.H. Mayrhofer, H. Duan:
"Dislocation densities and alternating strain fields in CrN/AlN nanolayers";
Thin Solid Films,
638
(2017),
S. 189
- 200.
O. Guillaume, B. Pérez‑Köhler, B. Schädl, C. Keibl, N. Saxenhuber, P. Heimel, E. Priglinger, S. Wolbank, H. Redl, A. Petter‑Puchner, R. Fortelny:
"Stromal vascular fraction cells as biologic coating of mesh for hernia repair";
Hernia,
24
(2020),
S. 1233
- 1243.
R. Haas, H.P. Degischer, P. Pongratz, H. Knoblich:
"Verformungs-Martensit in Violinsaiten aus rostfreiem Stahl ";
Praktische Metallographie - Practical Metallography,
41
(2004),
S. 354
- 366.
R. Haas, H.P. Degischer, P. Pongratz, A. Pyzalla:
"Microstructure and properties of violin strings made of metastable austenitic steel";
International Journal of Materials Research,
100
(2009),
11;
S. 1557
- 1565.
E.J. Haberland, T. Koch, S. Burkert, A. Klemenz:
"Nanoindentation on the surface of embedded and cut human auditory ossicles";
European Archives of Oto-Rhino-Laryngology,
262
(2005),
8;
S. 681.
E.J. Haberland, T. Koch, S. Burkert, A. Klemenz:
"Oberflächenuntersuchungen an Gehörknöchelchen-Hartschnitten mit dem Nanoindentor (Abstract)";
HNO-Informationen,
29
(2004),
2;
S. 106.
R Hahn, M. Bartosik, M. Arndt, P. Polcik, P.H. Mayrhofer:
"Annealing effect on the fracture toughness of CrN/TiN superlattices";
International Journal of Refractory Metals & Hard Materials,
71
(2018),
S. 352
- 356.
R Hahn, M. Bartosik, R. Soler, C. Kirchlechner, G. Dehm, P.H. Mayrhofer:
"Superlattice effect for enhanced fracture toughness of hard coatings";
Scripta Materialia,
124
(2016),
S. 67
- 70.
R Hahn, A Kirnbauer, M. Bartosik, S. Kolozsvári, P.H. Mayrhofer:
"Toughness of Si alloyed high-entropy nitride coatings";
Materials Letters,
251
(2019),
S. 238
- 240.
R Hahn, N. Koutná, T. Wojcik, A Davydok, S. Koloszvári, C. Krywka, D. Holec, M. Bartosik, P.H. Mayrhofer:
"Mechanistic study of superlattice-enabled high toughness and hardness in MoN/TaN coatings";
Communications Materials,
1
(2020),
62;
S. 01
- 10.
R Hahn, V. Moraes, A. Limbeck, P. Polcik, P.H. Mayrhofer, H. Euchner:
"Electron-configuration stabilized (W,Al)B2 solid solutions";
Acta Materialia,
174
(2019),
S. 398
- 405.
R Hahn, A. Tymoszuk, T. Wojcik, A Kirnbauer, T Kozák, J Capek, M. Sauer, A. Foelske-Schmitz, O Hunold, P. Polcik, P.H. Mayrhofer, H. Riedl:
"Phase formation and mechanical properties of reactively and non-reactively sputtered Ti-B-N hard coatings";
Surface & Coatings Technology,
420
(2021),
127327;
S. 1
- 11.
A. Hajian, M. Brehl, T. Koch, Ch. Zellner, S. Schwarz, T. Konegger, D. de Ligny, U. Schmid:
"Wet-chemical porosification of LTCC substrates: Dissolution mechanism and mechanical properties";
Microporous and Mesoporous Materials,
288
(2019),
S. 1
- 10.
G Halat, L Negrin, T. Koch, J. Erhart, P. Platzer, S Hajdu, J Streicher:
"Biomechanical characteristics of suture anchor implants for flexor digitorum profundus repair";
Journal of Hand Surgery - American Volume,
39
(2014),
2;
S. 256
- 261.
G Halat, L Negrin, E. Unger, T. Koch, J Streicher, J. Erhart, P. Platzer, S Hajdu:
"Introduction of a new repair technique in bony avulsion of the FDP tendon: A biomechanical study";
Scientific Reports,
8
(2018),
9906;
S. 1
- 8.
B.P. Harsha, A. Patnaik, M.K. Banerjee, E. Kozeschnik:
"Assessment of microstructural characterization and Thermo-Kinetic simulations for producing strengthened and toughened martensitic steels";
Materials Today: Proceedings,
44
(2021),
6;
S. 4903
- 4907.
St. Hartl, A. Schulz, H. Sima, T. Koch, M. Kaltenbacher:
"A Static Burst Test for Composite Flywheel Rotors";
Applied Composite Materials,
23
(2016),
3;
S. 271
- 288.
M. Hartmann, M. Pfaffinger, J. Stampfl:
"The role of solvents in Lithography-based Ceramic Manufacturing of lithium disilicate";
Materials,
14
(2021),
4;
S. 1045
- 1063.
C. Heller, N.U Pucher, B. Seidl, K. Kalinyaprak-Icten, G. Ullrich, L. Kuna, V. Satzinger, V. Schmidt, H. Lichtenegger, J. Stampfl, R. Liska:
"One- and two-photon activity of cross-conjugated photoinitiators with bathochromic shift";
Journal of Polymer Science Part A: Polymer Chemistry,
45
(2007),
S. 3280
- 3291.
C. Heller, M. Schwentenwein, G. Russmüller, T. Koch, D. Moser, C. Schopper, F. Varga, J. Stampfl, R. Liska:
"Vinylcarbonates and Vinylcarbamates: Biocompatible Monomers for Radical Photopolymerization";
Journal of Polymer Science Part A: Polymer Chemistry,
49
(2011),
3;
S. 650
- 661.
C. Heller, M. Schwentenwein, G. Russmüller, F. Varga, J. Stampfl, R. Liska:
"Vinyl Esters: Low Cytotoxicity Monomers for the Fabrication of Biocompatible 3D Scaffolds by Lithography Based Additive Manufacturing";
Journal of Polymer Science Part A: Polymer Chemistry,
47
(2009),
S. 6941
- 6954.
B. Hinterndorfer, G. Schneeweiss, S. Felber:
"The Temperature Dependence of the Fracture Stress of Notched Tensile Specimens";
Steel Research International,
Vol. 80
(2009),
No. 4, April;
S. 288
- 297.
M. Hochegger, B. Harrer, H.P. Degischer, S. Ilie:
"Röntgen-Computertomografie der Verformungsporen in Warmzugproben aus Baustahlbrammen";
Fortschritte in der Metallographie,
Sonderbände der Praktischen Metallographie
(2008),
40;
S. 197
- 202.
K. Hölzl, M. Fürsatz, H. Göcerler, B. Schädl, S. Zigon-Branc, M. Markovic, C. Gahleitner, J. Van Hoorick, S. van Vlierberghe, A. Kleiner, S. Baudis, A. Pauschitz, H. Redl, A. Ovsianikov, S. Nürnberger:
"Gelatin methacryloyl as environment for chondrocytes and cell delivery to superficial cartilage defects";
Journal of Tissue Engineering and Regenerative Medicine,
16
(2021),
2;
S. 207
- 222.
K. Hölzl, S. Lin, L. Tytgat, S. Van Vlierberghe, L. Gu, A. Ovsianikov:
"Bioink properties before, during and after 3D bioprinting";
Biofabrication,
8
(2016),
20 S.
A. Hofecker, P. Knaack, P. Steinbauer, M. Markovic, A. Ovsianikov, R. Liska:
"Novel synthesis routes for the preparation of low toxic vinyl ester and vinyl carbonate monomers";
Synthetic Communications,
50
(2020),
23;
S. 3629
- 3641.
C. Hofstetter, S. Orman, S. Baudis, J. Stampfl:
"Combining cure depth and cure degree, a new way to fully characterize novel photopolymers";
Additive Manufacturing,
24
(2018),
S. 166
- 172.
J. Hofstetter, E. Martinelli, S Pogatscher, P. Schmutz, E. Povoden-Karadeniz et al.:
"Influence of trace impurities on the in vitro and in vivo degradation of biodegradable Mg-5Zn-0.3Ca alloys";
Acta Biomaterialia,
23
(2015),
S. 347
- 353.
J. Hofstetter, S. Rüedi, I. Baumgartner, H. Kilian, B. Mingler, E. Povoden-Karadeniz et al.:
"Processing and microstructure-property relations of high-strength low-alloy (HSLA) Mg-Zn-Ca alloys";
Acta Materialia,
98
(2015),
S. 423
- 432.
D. Holec, F. Tasnadi, P. Wagner, M. Friak, J. Neugebauer, P.H. Mayrhofer, J. Keckes:
"Macroscopic elastic properties of textured ZrN-AlN polycrystalline aggregates: From ab initio calculations to grain-scale interactions";
Physical Review B,
90
(2014),
S. 184106-1
- 184106-9.
D. Holec, L. Zhou, R. Rachbauer, P.H. Mayrhofer:
"Alloying-related trends from first principles: An application to the Ti-Al-X-N system";
Journal of Applied Physics,
13
(2013),
113510;
S. 1
- 8.
R. Hollerweger, D. Holec, J. Paulitsch, M. Bartosik, R. Daniel, R. Rachbauer, P. Polcik, J. Keckes, C. Krywka, H. Euchner, P.H. Mayrhofer:
"Complementary ab initio and X-ray nanodiffraction studies of Ta2O5";
Acta Materialia,
83
(2015),
S. 276
- 284.
R. Hollerweger, D. Holec, J. Paulitsch, R. Rachbauer, P. Polcik, P.H. Mayrhofer:
"Magnetic field strength influence on the reactive magnetron sputter deposition of Ta2O5";
Journal of Physics D: Applied Physics,
46
(2013),
335203.
R. Hollerweger, H. Riedl, M. Arndt, S. Kolozsvári, S. Primig, P.H. Mayrhofer:
"Guidelines for increasing the oxidation resistance of Ti-Al-N based coatings";
Thin Solid Films,
688
(2019),
137290;
S. 1
- 7.
R. Hollerweger, H. Riedl, J. Paulitsch, M. Arndt, R. Rachbauer, P. Polcik, S. Primig, P.H. Mayrhofer:
"Origin of High Temperature Oxidation Resistance of Ti-Al-Ta-N Coatings";
Surface & Coatings Technology,
257
(2014),
19256;
S. 78
- 86.
C. Hollinsky, T Kolbe, I Walter, A. Joachim, S. Sandberg, T. Koch, T Rülicke:
"Comparison of a new self-gripping mesh with other fixation methods for laparoscopic hernia repair in a rat model";
Journal of the American College of Surgeons,
208
(2009),
6;
S. 1107
- 1114.
C. Hollinsky, T Kolbe, I Walter, A. Joachim, S. Sandberg, T. Koch, T Rülicke, A Tuchmann:
"Tensile strength and adhesion formation of mesh fixation systems used in laparoscopic incisional hernia repair";
Surgical Endoscopy and other Interventional Techniques,
24
(2010),
6;
S. 1318
- 1324.
C. Hollinsky, S. Sandberg, T. Koch, S. Seidler:
"Biomechanical properties of lightweight versus heavyweight meshes for laparoscopic inguinal hernia repair and their impact on recurrence rates";
Surgical Endoscopy and other Interventional Techniques,
22
(2008),
12;
S. 2679
- 2685.
S. Holly, P. Haslberger, D. Zügner, R. Schnitzer, E. Kozeschnik:
"Development of high-strength welding consumables using calculations and microstructural characterisation";
Welding in the World,
62
(2018),
S. 451
- 458.
B. Holzer, M. Lunzer, A. Rosspeintner, G. Licari, M. Tromayer, S. Naumov, D. Lumpi, E. Horkel, C. Hametner, A. Ovsianikov, R. Liska, E. Vauthey, J. Fröhlich:
"Towards efficient initiators for two-photon induced polymerization: fine tuning of the donor/acceptor properties";
Molecular Systems Design & Engineering,
4
(2019),
2;
S. 437
- 448.
I. Holzer, E. Kozeschnik:
"Computer simulation of the yield strength evolution in Cu-precipitation strengthened ferritic steel";
Materials Science and Engineering A,
527
(2010),
S. 3546
- 3551.
I. Holzer, E. Kozeschnik:
"Predicted precipitate back-stress and creep rupture strength of the advanced 9-12 % Cr steel COST E2";
International Journal of Materials Research,
99
(2008),
4;
S. 416
- 421.
I. Holzer, E. Kozeschnik:
"Simulation of copper precipitation in fe-cu alloys";
Materials Science Forum,
638-642
(2010),
S. 2579
- 2584.
I. Holzer, E. Kozeschnik, H. Cerjak:
"New approach to predict the long-term creep behaviour and evolution of precipitate back-stress of 9-12% chromium steels";
Transactions Of The Indian Institute Of Metals,
63
(2010),
S. 137
- 143.
J. Homa, S. Zellhofer, J. Stampfl:
"Solid free form fabrication of silicon carbide cross flow filters";
Journal of Ceramic Processing Research,
10
(2009),
1;
S. 25
- 32.
M. Huber, V. Archodoulaki, E. Pomakhina, B. Pukanszky, E. Zinöcker, M Gahleitner:
"Environmental degradation and formation of secondary microplastics from packaging material: A polypropylene film case study";
Polymer Degradation and Stability,
195
(2022),
109794.
T. Huber, H.P. Degischer, G. Lefranc, T. Schmitt:
"Thermal expansion studies on aluminium-matrix composites with different reinforcement architecture of SiC particles";
Composites Science and Technology,
66
(2006),
S. 2206
- 2217.
T. Huber, H. Knoblich, H.P. Degischer:
"Charakterisierung des Gefüges von Al-SiCp-Metall-Matrix-Verbundwerkstoffen";
Praktische Metallographie - Practical Metallography,
XL
(2003),
9;
S. 432
- 442.
W. Hübner, A. Pyzalla, K. Aßmus, E. Wild, T. Wroblewski:
"Phase stability of AISI 304 stainless steel during sliding wear at extremely low temperatures";
Wear,
255
(2003),
S. 476
- 480.
B. Husar, C. Heller, M. Schwentenwein, A. Mautner, F. Varga, T. Koch, J. Stampfl, R. Liska:
"Biomaterials Based on Low Cytotoxic Vinyl Esters for Bone Replacement Application";
Journal of Polymer Science Part A: Polymer Chemistry,
49
(2011),
S. 4927
- 4934.
B. Husar, A. Mautner, C. Heller, M. Schwentenwein, F. Varga, T. Koch, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"Utilization of photopolymerization of new low toxic vinyl monomers in bone tissue engineering";
Journal of Tissue Engineering and Regenerative Medicine,
6/Supplement s1/
(2012),
S. 370.
F. Imtiaz, E. Kozeschnik:
"Investigation of Austenite-to-Ferrite Transformation in Ultralow and Low-Carbon Steel Using High-Speed Quenching Dilatometry and Thermokinetic Simulation";
Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science,
48
(2017),
7;
S. 3193
- 3204.
R. Inführ, N. Pucher, C. Heller, H. Lichtenegger, R. Liska, V. Schmidt, L. Kuna, A. Haase, J. Stampfl:
"Functional polymers by two-photon 3D lithography";
Applied Surface Science,
254
(2007),
4;
S. 836
- 840.
S. Ivanovici, C. Rill, T. Koch, M. Puchberger, G. Kickelbick:
"Solvent effects in the formation of hybrid materials based on titanium alkoxide-polysiloxane precursors";
New Journal of Chemistry,
32
(2008),
7;
S. 1243
- 1252.
T. Ivas, A. Grundy, E. Povoden-Karadeniz, L.J. Gauckler:
"Phase diagram of CeO2-CoO for nano sized powders";
CALPHAD - Computer Coupling of Phase Diagrams and Thermochemistry,
36
(2012),
S. 57
- 64.
T. Ivas, A. Grundy, E. Povoden-Karadeniz, S. Zeljkovic, L.J. Gauckler:
"Experimental phase diagram determination and thermodynamic assessment of the Gd2O3-CoO system";
Acta Materialia,
58
(2010),
12;
S. 4077
- 4087.
T. Ivas, E. Povoden-Karadeniz, A. Grundy, E. Jud-Sierra, J. Grässlin, L.J. Gauckler:
"Experimental phase diagram determination and thermodynamic assessment of the CeO2-Gd2O3-CoO system";
Journal of the American Ceramic Society,
96
(2012),
2;
S. 613
- 626.
A. Jacob, C. Domain, G. Adjanor, P. Todeschini, E. Povoden-Karadeniz:
"Thermodynamic modeling of G-phase and assessment of phase stabilities in reactor pressure vessel steels and cast duplex stainless steels";
Journal of Nuclear Materials,
533
(2020).
A. Jacob, E. Povoden-Karadeniz:
"Predictive computations of intermetallic σ phase evolution in duplex steel. I) Thermodynamic modeling of σ phase in the Fe-Cr-Mn-Mo-Ni system";
CALPHAD - Computer Coupling of Phase Diagrams and Thermochemistry,
71
(2020).
A. Jacob, E. Povoden-Karadeniz:
"Predictive computations of intermetallic σ phase evolution in duplex steel. II) Thermo-kinetic simulation in duplex and hyper duplex stainless steels";
CALPHAD - Computer Coupling of Phase Diagrams and Thermochemistry,
71
(2020).
A. Jacob, E. Povoden-Karadeniz, E. Kozeschnik:
"Revised thermodynamic description of the Fe-Cr system based on an improved sublattice model of the σ phase";
CALPHAD - Computer Coupling of Phase Diagrams and Thermochemistry,
60
(2018),
60;
S. 16
- 28.
A. Jacob, E. Povoden-Karadeniz, E. Kozeschnik:
"The Cr-Nb-Si system: Improved thermodynamic modelling and its use in simulation of Laves phase in steel";
CALPHAD - Computer Coupling of Phase Diagrams and Thermochemistry,
56
(2017),
56;
S. 80
- 91.
Jacob, C. Schmetterer, A. Khvan, A. Kondratiec, Ivanov, Hallstedt et al.:
"Liquidus projection and thermodynamic modeling of the Cr-Fe-Nb ternary system";
CALPHAD - Computer Coupling of Phase Diagrams and Thermochemistry,
54
(2016),
S. 1
- 15.
M. Jenni, L. Schimmer, R. Zauner, J. Stampfl, J. Morris:
"Quantitative study of powder binder separation of feedstocks";
Powder Injection Moulding International,
2
(2008),
4;
S. 50
- 55.
J. Jílek Jr., M. Jílek, F. Mendez Martin, P.H. Mayrhofer, S. Veprek:
"High-rate deposition of AlTiN and related coatings with dense morphology by central cylindrical direct current magnetron sputtering";
Thin Solid Films,
556
(2014),
S. 361
- 368.
M. Jones, V. Archodoulaki, B. Köck:
"The power of good decisions: Promoting eco-informed design attitudes in plastic selection and use";
Resources, Conservation and Recycling,
182
(2022),
106324;
9 S.
L. Jonusauskas, M. Lau, P. Gruber, B. Gökce, M. Malinauskas, A. Ovsianikov:
"Plasmon assisted 3D microstructuring of gold nanoparticle-doped polymers";
Nanotechnology,
27
(2016),
S. 1.
A. Joseph, T. Koch, S. Seidler, S. Thomas, K. Joseph:
"Crystallization behaviour and spherulite growth rate of isotactic polypropylene in isotactic polypropylene/natural rubber based thermoplastic elastomers";
Journal of Applied Polymer Science,
109
(2008),
3;
S. 1714
- 1721.
A. Joseph, S. Lüftl, S. Seidler, S. Thomas, J. Kuruvilla:
"Nonisothermal thermophysical evaluation of polypropylenen/natural rubber based TPEs: Effect of blend ratio and dynamic vulcanization";
Polymer Engineering and Science,
49
(2009),
7;
S. 1332
- 1339.
I. Jouanny, J. Palisaitis, C. Ngo, P.H. Mayrhofer, L. Hultman, P.O.A. Persson, S. Kodambaka:
"In situ Transmission Electron Microscopy Studies of the Kinetics of Pt-Mo alloy Diffusion in ZrB2 Thin Films";
Applied Physics Letters,
103
(2013),
121601;
S. 1
- 3.
J. Jung, E. Kozeschnik, S. Han, B. De Cooman:
"Analysis of the Mechanical Properties of N-Added CMn Structural Steel by the Impulse Internal Friction Technique";
Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science,
43A
(2012),
S. 4587
- 4600.
V. Juras, M. Bittsansky, Z. Majdisova, P. Szomolany, I. Sulzbacher, S. Gäbler, J. Stampfl, G. Schüller, S. Trattnig:
"In vitro determination of biomechanical properties of human articular cartilage in osteoarthritis using multi-parametric MRI";
Journal of Magnetic Resonance,
197
(2009),
1;
S. 40
- 47.
S. Kagerer, O Hudak, M. Schloffer, H. Riedl, P.H. Mayrhofer:
"TGO formation and oxygen diffusion in Al-rich gamma-TiAl PVD-coatings on TNM alloys";
Scripta Materialia,
210
(2022),
114455;
S. 1
- 5.
S. Kagerer, L. Zauner, T. Wojcik, S. Koloszvári, T Kozák, J Capek, P Zeman, H. Riedl, P.H. Mayrhofer:
"Reactive HiPIMS deposition of Al-oxide thin films using W-alloyed Al targets";
Surface & Coatings Technology,
422
(2021),
127467;
S. 1
- 10.
L. Kain, O.G. Andriotis, P. Gruber, M. Frank, M. Markovic, D. Grech, V. Nedelkovski, M. Stolz, A. Ovsianikov, P.J. Thurner:
"Calibration of colloidal probes with atomic force microscopy for micromechanical assessment";
Journal of the Mechanical Behavior of Biomedical Materials,
85
(2018),
S. 225
- 236.
F. Kamleitner, B. Duscher, T. Koch, S. Knaus, V. Archodoulaki:
"Long chain branching as an innovative up-cycling process of polypropylene post-consumer waste - Possibilities and limitations";
Waste Management,
68
(2017),
S. 32
- 37.
F. Kamleitner, B. Duscher, T. Koch, S. Knaus, V. Archodoulaki:
"Upcycling of polypropylene-the influence of polyethylene impurities";
Polymer Engineering and Science,
57
(2017),
12;
S. 1374
- 1381.
F. Kamleitner, B. Duscher, T. Koch, S. Knaus, K. Schmid, V. Archodoulaki:
"Influence of the Molar Mass on Long-Chain-Branching of Polypropylene";
Polymers,
9
(2017),
9.
E. Karaagac, M. Jones, T. Koch, V. Archodoulaki:
"Polypropylene Contamination in Post-Consumer Polyolefin Waste: Characterisation, Consequences and Compatibilisation";
Polymers,
13
(2021),
16;
S. 1
- 12.
E. Karaagac, T. Koch, V. Archodoulaki:
"Choosing an Effective Compatibilizer for a Virgin HDPE Rich-HDPE/PP Model Blend";
Polymers,
13
(2021),
20;
S. 1
- 17.
E. Karaagac, T. Koch, V. Archodoulaki:
"The effect of PP contamination in recycled high-density polyethylene (rPE-HD) from post-consumer bottle waste and their compatibilization with olefin block copolymer (OBC)";
Waste Management,
119
(2021),
1;
S. 285
- 294.
M. Karlsohn, S. Weber, S.R. Alavi Zaree, S. Müller, W. Theisen, W. Reimers, A. Pyzalla:
"Manufacturing, microstructure and wear resistance of novel hot extruded Fe based metal matrix composites";
Powder Metallurgy,
51
(2008),
1;
S. 31
- 37.
J. Kastner, B. Harrer, H.P. Degischer:
"High resolution cone beam X-ray computed tomography of";
Materials Characterization,
62
(2011),
S. 99
- 107.
J. Kastner, B. Harrer, G. Requena:
"A comparative study of high resolution cone beam X-ray tomography and synchrotron tomography applied to Fe- and Al-alloys";
NDT and E International,
43
(2010),
7;
S. 599
- 605.
J. Kastner, B. Plank, G. Requena:
"Non-destructive characterisation of polymers and Al-alloys by polychromatic cone-beam phase contrast tomography";
Materials Characterization,
64
(2012),
1;
S. 79
- 87.
M. Kerber, F. Spieckermann, R. Schuster, C. von Baeckmann, T. Fischer, N. Schell, T. Waitz, E. Schafler:
"In Situ Synchrotron X-Ray Diffraction during High-Pressure Torsion Deformation of Ni and NiTi";
Advanced Engineering Materials,
23
(2021),
11.
A Kirnbauer, V. Dalbauer, P Kutrowatz, S. Kolozsvári, J. Ramm, C.M. Koller, P.H. Mayrhofer:
"Oxygen dependent morphology and mechanical properties of Al Cr (Fe)-based coatings";
Surface & Coatings Technology,
349
(2018),
249;
S. 103
- 110.
A Kirnbauer, A. Kretschmer, C.M. Koller, T. Wojcik, V. Paneta, M. Hans, J.M. Schneider, P. Polcik, P.H. Mayrhofer:
"Mechanical properties and thermal stability of reactively sputtered multi- principal-metal Hf-Ta-Ti-V-Zr nitrides";
Surface & Coatings Technology,
389
(2020),
125674.
A Kirnbauer, C. Spadt, C. Koller, S. Kolozsvári, P.H. Mayrhofer:
"High-entropy oxide thin films based on Al-Cr-Nb-Ta-Ti";
Vacuum,
168
(2019).
A Kirnbauer, A. Wagner, V. Moraes, D. Primetzhofer, M. Hans, J.M. Schneider, P. Polcik, P.H. Mayrhofer:
"Thermal stability and mechanical properties of sputtered (Hf,Ta,V,W,Zr)-diborides";
Acta Materialia,
200
(2020),
S. 559
- 569.
P. Kiss, J. Glinz, W. Stadlbauer, C. Burgstaller, V. Archodoulaki:
"The effect of thermally desized carbon fibre reinforcement on the flexural and impact properties of PA6, PPS and PEEK composite laminates: A comparative study";
Composites - Part B: Engineering,
215
(2021),
S. 1
- 13.
P. Kiss, J. Schoefer, W. Stadlbauer, C. Burgstaller, V. Archodoulaki:
"An experimental study of glass fibre roving sizings and yarn finishes in high-performance GF-PA6 and GF-PPS composite laminates";
Composites - Part B: Engineering,
204
(2021),
108487;
S. 1
- 13.
P. Kiss, W. Stadlbauer, C. Burgstaller, V. Archodoulaki:
"Development of high-performance glass fibre-polypropylene composite laminates: Effect of fibre sizing type and coupling agent concentration on mechanical properties";
Composites Part A: Applied Science and Manufacturing,
138
(2020),
106056;
S. 1
- 11.
P. Kiss, W. Stadlbauer, C. Burgstaller, H. Stadler, S. Fehringer, F. Haeuserer, V. Archodoulaki:
"In-house recycling of carbon- and glass fibre-reinforced thermoplastic composite laminate waste into high-performance sheet materials";
Composites Part A: Applied Science and Manufacturing,
139
(2020),
S. 106110
- 106121.
Y. Kiyan, A. Limbourg, R. Kiyan, S. Tkachuk, F. Limbourg, A. Ovsianikov, B. Chichkov, H. Haller, I. Dumler:
"Urokinase receptor associates with myocardin to control vascular smooth muscle cells phenotype in vascular disease";
Arteriosclerosis, Thrombosis, and Vascular Biology,
32
(2012),
S. 110
- 122.
T. Klein, C. Hofer, M. Lukas, T. Wojcik, R. Schnitzer, M. Galler, G. Ressel:
"Formation of "carbide-free zones" resulting from the interplay of C redistribution and carbide precipitation during bainitic transformation";
Materialia,
7
(2019),
100380;
S. 1
- 5.
A. Kleinbichler, M. Bartosik, B. Völker, M.J. Cordill:
"Thin Film Adhesion of Flexible Electronics Influenced by Interlayers";
Advanced Engineering Materials,
#
(2016),
S. 1
- 7.
N. Klikovits, L. Sinawehl, P. Knaack, T. Koch, J. Stampfl, C. Gorsche, R. Liska:
"UV-Induced Cationic Ring-Opening Polymerization of 2-Oxazolines for Hot Lithograph";
ACS Macro Letters,
9
(2020),
4;
S. 546
- 551.
F. Klimashin, H. Euchner, P.H. Mayrhofer:
"Computational and experimental studies on structure and mechanical properties of Mo-Al-N";
Acta Materialia,
107
(2016),
S. 273
- 278.
F. Klimashin, N. Koutná, H. Euchner, D. Holec, P.H. Mayrhofer:
"The impact of nitrogen content and vacancies on structure and mechanical properties of Mo-N thin films";
Journal of Applied Physics,
120
(2016),
185301;
S. 1
- 10.
F. Klimashin, L. Lobmaier, N. Koutná, D. Holec, P.H. Mayrhofer:
"The MoN-TaN system: Role of vacancies in phase stability and mechanical properties";
Materials & Design,
202
(2021),
109568;
S. 1
- 12.
F. Klimashin, P.H. Mayrhofer:
"Ab initio-guided development of super-hard Mo-Al-Cr-N coatings";
Scripta Materialia,
140
(2017),
S. 27
- 30.
F. Klimashin, H. Riedl, D. Primetzhofer, J. Paulitsch, P.H. Mayrhofer:
"Composition driven phase evolution and mechanical properties of Mo-Cr-N hard coatings";
Journal of Applied Physics,
118
(2015),
025305;
S. 1
- 7.
M Knausz, G Oreski, G Eder, Y Voronko, B. Duscher, T. Koch, G. Pinter, K Berger:
"Degradation of photovoltaic backsheets: Comparison of the aging induced changes on module and component level";
Journal of Applied Polymer Science,
132
(2015),
42093;
S. 1
- 8.
M Knausz, G Oreski, M Schmidt, P Guttmann, K Berger, Y Voronko, G Eder, T. Koch, G. Pinter:
"Thermal expansion behavior of solar cell encapsulation materials";
Polymer Testing,
44
(2015),
S. 160
- 167.
T. Koch, M Evaristo, A. Pauschitz, M. Roy, A Cavaleiro:
"Nanoindentation and nanoscratch behaviour of reactive sputtered deposited W-S-C film";
Thin Solid Films,
518
(2009),
S. 185
- 193.
T. Koch, F.R. Kogler, U. Schubert, S. Seidler:
"Mechanical Properties of Organic-Inorganic Hybrid Materials Determined by Indentation Techniques";
Monatshefte für Chemie,
138
(2007),
S. 293
- 299.
T. Koch, D. Machl:
"Evaluation of scratch resistance in multiphase PP blends";
Polymer Testing,
26
(2007),
7;
S. 927
- 936.
T. Koch, D. Salaberger, A Zankel, H Reingruber, A. Steiger-Thirsfeld, Y Voronko, S. Seidler:
"Methods for Characterizing the 3-D Morphology of Polymer Composites";
Macromolecular Symposia,
315
(2012),
S. 115
- 124.
T. Koch, S. Seidler:
"Applications of instrumented indentation testing for the characterization of polypropylene materials";
Proceedings of the Institution of Mechanical Engineers Part C - Journal of Mechanical Engineering Science,
226
(2012),
2;
S. 385
- 393.
T. Koch, S. Seidler:
"Correlations between indentation hardness and yield stress in thermoplastic polymers";
Strain,
45
(2009),
1;
S. 26
- 33.
T. Koch, S. Seidler, E. Halwax, S. Bernstorff:
"Microhardness of quenched and annealed isotactic polypropylene";
Journal of Materials Science,
42
(2007),
S. 5318
- 5326.
S. Kodambaka, C. Ngo, J. Palisaitis, P.H. Mayrhofer, L. Hultman, P.O.A. Persson:
"Kinetics of Ga Droplet Decay on Thin Carbon Films";
Applied Physics Letters,
102
(2013),
161601;
S. 1
- 4.
F.R. Kogler, T. Koch, H. Peterlik, S. Seidler, U. Schubert:
"Mechanical, thermomechanical, and thermal properties of polystyrene crosslinked with a multifunctional zirconium oxo cluster";
Journal of Polymer Science Part B: Polymer Physics,
45
(2007),
16;
S. 2215
- 2231.
B. Kohlhauser, H. Riedl, C.M. Koller, V. Paneta, S. Kolozsvári, P.H. Mayrhofer:
"How microalloying of the Al target can improve process and film characteristics of sputtered alumina";
Surface & Coatings Technology,
393
(2020),
125762;
S. 1
- 9.
B. Kohlhauser, M. Ripoll Rodríguez, H. Riedl, C.M. Koller, N. Koutná, A. Amsüss, H. Hutter, G Ramirez, C. Gachot, A. Erdemir, P.H. Mayrhofer:
"How to get noWear? - A new take on the design of in-situ formed high performing low-friction tribofilms";
Materials & Design,
190
(2020),
108519;
S. 1
- 8.
C.M. Koller, V. Dalbauer, A Kirnbauer, S. Löffler, S. Kolozsvári, J. Ramm, P.H. Mayrhofer:
"Selective phase formation in substoichiometric Al-Cr-based oxides";
Scripta Materialia,
139
(2017),
139;
S. 144
- 147.
C.M. Koller, V. Dalbauer, A Kirnbauer, M. Sauer, S. Kolozsvári, J. Ramm, P.H. Mayrhofer:
"Impact of Si and B on the phase stability of cathodic arc evaporated Al0.70Cr0.30-based oxides";
Scripta Materialia,
152
(2018),
152;
S. 107
- 111.
C.M. Koller, V. Dalbauer, S. Kolozsvári, J. Ramm, P.H. Mayrhofer:
"Microstructure and phase evolution of gradually-structured arc evaporated Al0.25Cr0.75-based oxide coatings";
Vacuum,
155
(2018),
155;
S. 645
- 649.
C.M. Koller, V. Dalbauer, A Schmelz, R. Raab, P. Polcik, J. Ramm, P.H. Mayrhofer:
"Structure, mechanical properties, and thermal stability of arc evaporated (Al1-xCrx)2O3 coatings";
Surface & Coatings Technology,
342
(2018),
342;
S. 37
- 47.
C.M. Koller, S.A. Glatz, S. Koloszvári, H. Bolvardi, P.H. Mayrhofer:
"Thermal stability and oxidation resistance of architecturally designed Ti-Al-N and Ti-Al-Ta-N-based coatings";
Surface & Coatings Technology,
385
(2020),
125444;
S. 01
- 11.
C.M. Koller, S.A. Glatz, S. Koloszvári, J. Ramm, P.H. Mayrhofer:
"Influence of substrate bias on structure and mechanical properties of arc evaporated (Al,Cr)2O3 and (Al,Cr,Fe)2O3 coatings";
Surface & Coatings Technology,
319
(2017),
319;
S. 389
- 393.
C.M. Koller, S.A. Glatz, H. Riedl, S. Kolozsvári, P. Polcik, H. Bolvardi, P.H. Mayrhofer:
"Structure and mechanical properties of architecturally designed Ti-Al-N and Ti-Al-Ta-N-based multilayers";
Surface & Coatings Technology,
385
(2020),
125355;
S. 1
- 10.
C.M. Koller, R Hahn, J. Ramm, S. Kolozsvári, P.H. Mayrhofer:
"Microstructural modifications in powder-metallurgically produced Al0.675Cr0.275Fe0.05 targets during cathodic arc evaporation";
Journal of Vacuum Science & Technology A,
A34
(2016),
A34;
S. 1
- 8.
C.M. Koller, R Hahn, B. Widrig, J. Ramm, S. Kolozsvári, J. Paulitsch, P.H. Mayrhofer:
"Triggering the Phase Evolution Within (Al,Cr)2O3-based Coatings by Alloying and Microstructural Concepts";
Berg- und Hüttenmännische Monatshefte (BHM),
191
(2016),
Volume 161 Issue 7;
S. 325
- 329.
C.M. Koller, R. Hollerweger, R. Rachbauer, S. Kolozsvári, J. Paulitsch, P.H. Mayrhofer:
"Annealing studies and oxidation tests of a hybrid multilayer arrangement of cathodic arc evaporated Ti-Al-N and reactively sputtered Ta-Al-N coatings";
Surface & Coatings Technology,
283
(2015),
S. 89
- 95.
C.M. Koller, R. Hollerweger, C. Sabitzer, R. Rachbauer, P. Polcik, J. Paulitsch, P.H. Mayrhofer:
"Thermal Stability and Oxidation Resistance of Arc Evaporated TiAlN, TaAlN, TiAlTaN, and TiAlN/TaAlN Coatings";
Surface & Coatings Technology,
Volume 259, Part C
(2014),
259;
S. 599
- 607.
C.M. Koller, A Kirnbauer, V. Dalbauer, S. Koloszvári, J. Ramm, P.H. Mayrhofer:
"On the oxidation behaviour of cathodic arc evaporated Al-Cr-Fe and Al-Cr-Fe-O coatings part I";
Journal of Vacuum Science & Technology A (eingeladen),
37
(2019),
041503;
S. 01
- 10.
C.M. Koller, A Kirnbauer, R Hahn, B. Widrig, S. Koloszvári, J. Ramm, P.H. Mayrhofer:
"Oxidation behavior of intermetallic Al-Cr and Al-Cr-Fe macroparticles";
Journal of Vacuum Science & Technology A,
35
(2017),
6;
S. 06160101
- 06160110.
C.M. Koller, A Kirnbauer, S. Koloszvári, J. Ramm, P.H. Mayrhofer:
"On the oxidation behaviour of cathodic arc evaporated Al-Cr-Fe and Al-Cr-Fe-O coatings part II: TEM in-vestigations of Al0.675Cr0.275Fe0.05-based films";
Journal of Vacuum Science & Technology A (eingeladen),
37
(2019),
041504;
S. 01
- 09.
C.M. Koller, A Kirnbauer, S. Kolozsvári, J. Ramm, P.H. Mayrhofer:
"Impact of morphology and phase composition on mechanical properties of α-structured (Cr,Al)2O3/(Al,Cr,X)2O3 multilayers";
Scripta Materialia,
146
(2018),
146;
S. 208
- 212.
C.M. Koller, A Kirnbauer, R. Rachbauer, S. Kolozsvári, P.H. Mayrhofer:
"Thermally-induced phase transformation sequence of arc evaporated Ta-Al-N coatings";
Scripta Materialia,
113
(2016),
S. 75
- 78.
C.M. Koller, H Marihart, H. Bolvardi, S. Kolozsvári, P.H. Mayrhofer:
"Structure, phase evolution, and mechanical properties of DC, pulsed DC, and high power impulse magnetron sputtered Ta-N films";
Surface & Coatings Technology,
347
(2018),
347;
S. 304
- 312.
C.M. Koller, J. Ramm, S. Kolozsvári, F. Munnik, J. Paulitsch, P.H. Mayrhofer:
"Corundum-type Fe-doped cathodic arc evaporated Al-Cr-O coatings";
Scripta Materialia,
Volume 97
(2015),
S. 49
- 52.
C.M. Koller, J. Ramm, S. Kolozsvári, J. Paulitsch, P.H. Mayrhofer:
"Role of droplets and iron on the phase formation of arc evaporated Al-Cr-oxide coatings";
Surface & Coatings Technology,
Volume 276
(2015),
S. 735
- 742.
C.M. Koller, M. Stüber, P.H. Mayrhofer:
"Progress in the synthesis of Al- and Cr-based sesquioxide coatings for protective applications";
Journal of Vacuum Science & Technology A (eingeladen),
37
(2019),
060802;
S. 01
- 23.
S. Konovalov, U. Prahl, R. Kohlmann, E. Kozeschnik, W. Bleck:
"Precipitation development simulation of high-temperature carburization along the process chain";
HTM Journal of Heat Treatment and Materials,
66
(2011),
4;
S. 217
- 229.
I. Kotter, W. Grellmann, T. Koch, S. Seidler:
"Morphology-Toughness Correlation of Polypropylene/Ethylene-Propylene Rubber Blends";
Journal of Applied Polymer Science,
100
(2006),
S. 3364
- 3371.
N. Koutná, P. Řehák, Z. Chen, M. Bartosik, M. Fallmann, M. Černý, Z. Zhang, M. Friak, M. Sob, P.H. Mayrhofer, D. Holec:
"Correlating structural and mechanical properties of AlN/TiN superlattice films";
Scripta Materialia,
165
(2019),
S. 159
- 163.
N. Koutná, A. Brenner, D. Holec, P.H. Mayrhofer:
"High-throughput first-principles search for ceramic superlattices with improved ductility and fracture resistance";
Acta Materialia,
206
(2021),
116615;
S. 1
- 10.
N. Koutná, P. Erdely, S. Zöhrer, R. Franz, Y. Du, S. Liu, P.H. Mayrhofer, D. Holec:
"Experimental chemistry and structural stability of AlNb3 enabled by antisite defects formation";
Materials,
12
(2019),
1104;
S. 1
- 11.
N. Koutná, R Hahn, J. Zálesák, M. Friak, M. Bartosik, J. Keckes, M. Sob, P.H. Mayrhofer, D. Holec:
"Point-defect engineering of MoN/TaN superlattice films: A first-principles and experimental study";
Materials & Design,
186
(2020),
S. 1
- 11.
N. Koutná, D. Holec, M. Friak, P.H. Mayrhofer et al.:
"Stability and elasticity of metastable solid solutions and superlattices in the MoN--TaN system: First-principles calculations";
Materials & Design,
144
(2018),
S. 310
- 322.
N. Koutná, D. Holec, O. Svoboda, F. Klimashin, P.H. Mayrhofer:
"Point defects stabilise cubic Mo-N and Ta-N";
Journal of Physics D: Applied Physics,
49
(2016),
375303;
S. 1
- 8.
E. Kozeschnik:
"Thermodynamic prediction of the equilibrium chemical composition of critical nuclei: Bcc Cu precipitation in alpha-Fe";
Scripta Materialia,
59
(2008),
S. 1018
- 1021.
E. Kozeschnik, J. Svoboda, R. Radis, F.D. Fischer:
"Mean-Field Model for the Growth and Coarsening of Stoichiometric Precipitates at Grain Boundaries";
Modelling and Simulation in Materials Science and Engineering,
18
(2010),
015011;
S. 1
- 19.
A. Kretschmer, D. Holec, K. Yalamanchili, H. Rudigier, M. Hans, J.M. Schneider, P.H. Mayrhofer:
"Strain-stabilized Al-containing high-entropy sublattice nitrides";
Acta Materialia,
224
(2022),
S. 117483.
A. Kretschmer, A Kirnbauer, V. Moraes, D. Primetzhofer, K. Yalamanchili, H. Rudigier, P.H. Mayrhofer:
"Improving phase stability, hardness, and oxidation resistance of reactively magnetron sputtered (Al,Cr,Nb,Ta,Ti)N thin films by Si-alloying";
Surface & Coatings Technology,
416
(2021),
127162.
A. Kretschmer, T. Wojcik, R. Schuster, K. Yalamanchili, H. Rudigier, P.H. Mayrhofer:
"Tuning of structure, grain orientation and mechanical properties in reactively sputtered (Al,Mo,Ta,V,W)N";
Materials & Design,
213
(2021),
S. 110346.
J. Kreyca, E. Kozeschnik:
"Analysis of the Temperature and Strain-Rate Dependences of Strain Hardening";
Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science,
49
(2018),
1;
S. 18
- 21.
J. Kreyca, E. Kozeschnik:
"Dissolution of hardening phases during deformation in an A6061 Aluminium alloy";
Procedia Engineering,
207
(2017),
S. 37
- 41.
J. Kreyca, E. Kozeschnik:
"Flow Stress Modelling and Microstructure Development during Deformation of Metallic Materials";
Materials Science Forum,
892
(2017),
S. 44
- 49.
J. Kreyca, E. Kozeschnik:
"State parameter-based constitutive modelling of stress strain curves in Al-Mg solid solutions";
International Journal of Plasticity,
103
(2018),
103;
S. 67
- 80.
J. Kreyca, E. Kozeschnik:
"Temperature-dependent strain hardening, precipitation and deformationinduced microstructure evolution in AA 6061";
Materials Science and Engineering A,
708
(2017),
S. 411
- 418.
B. Kriszt:
"Innovation zellulare Metalle - Potenziale und Perspektiven";
Berg- und Hüttenmännische Monatshefte (BHM),
149
(2004),
5;
S. 181
- 186.
B. Kriszt, C. Kolbeck, A. Kottar, S. Figoutz, W. Pelzer:
"Characterization of open cell iron based cellular material";
Steel Grips, Jounal of steel and related materials,
1
(2003),
No. 5;
S. 374
- 379.
S. Krivec, N. Matsko, V. Satzinger, N.U Pucher, N. Galler, T. Koch, V. Schmidt, W. Grogger, R. Liska, H. Lichtenegger:
"Silica-Based, Organically Modified Host Material for Waveguide Structuring by Two-Photon-Induced Photopolymerization";
Advanced Functional Materials,
20
(2010),
S. 1
- 9.
P. Kürnsteiner, M. B. Wilm, A. Weisheit, P. Barriobero Vila, E. A. Jägle, D. Raabe:
"Massive nanoprecipitation in an Fe-19Ni-xAl maraging steel triggered by the intrinsic heat treatment during laser metal deposition";
Acta Materialia,
-
(2017),
129;
S. 52
- 60.
S. Kumar, S. Krisam, A. Jacob, E. Povoden-Karadeniz:
"Microstructures and element distributions in an aged hyper duplex stainless steel and corresponding hardness variation";
Materials & Design,
194
(2020),
108951.
S. Kumar, S. Rajput, S. Nath:
"Understanding Hot Workability and Flow Stress Prediction through Processing Map with Microstructural Correlation for HY85 Steel";
Materials Performance and Characterisation,
9
(2020),
2;
S. 134
- 149.
J. Kumpfmüller, K. Stadlmann, V. Satzinger, L. Zhiquan, J. Stampfl, R. Liska:
"Two-photon-induced Microfabrication of Flexible Optical Waveguides";
Journal of Laser Micro Nanoengineering,
6
(2011),
3;
S. 195
- 198.
J. Kupfmüller, Z. Li, V. Satzinger, J. Stampfl, R. Liska:
"Two-photon-induced thiol-ene polymerization as a fabrication tool for flexible optical waveguides";
Designed Monomers and Polymers,
(2013),
S. 1
- 11.
J. Kupfmüller, K. Stadlmann, Z. Li, V. Satzinger, J. Stampfl, R. Liska:
"Flexible optical interconnects via thiol-ene two-photon-induced polymerization";
MRS Online Proceedings Library,
1438 Optical Interconnects
(2013),
S. 1438.
D. Kurumlu, E Payton, M. Young, M. Schöbel, G. Requena, G. Eggeler:
"High-temperature strength and damage evolution in short fiber reinforced aluminum alloys studied by miniature creep testing and synchrotron microtomography";
Acta Materialia,
60
(2012),
1;
S. 67
- 78.
R. Lach, W. Grellmann:
"Time- and Temperature-Dependent Fracture Mechanics of Polymers: General Aspects at Monotonic Quasi-Static and Impact Loading Conditions";
Macromolecular Materials and Engineering,
293
(2008),
7;
S. 555
- 567.
R. Lach, P Hutar, P. Vesely, E. Nezbedova, Z Knesl, T. Koch, C. Bierögel, W. Grellmann:
"Assessment with indentation techniques of the local mechanical behavior of joints in polymer parts";
Polimery,
58
(2013),
11-12;
S. 900
- 905.
R. Lach, S. Seidler, W. Grellmann:
"Resistance against the Intrinsic Rate of Fracture Mechanics Parameters for Polymeric Materials under Moderate Impact Loading";
Mechanics of Time-Dependent Materials,
9
(2005),
2-3;
S. 103
- 119.
D. Lang, E. Povoden-Karadeniz et al.:
"On the chemistry of the carbides in a molybdenum base Mo-Hf-C alloy produced by powder metallurgy";
Journal of Alloys and Compounds,
654
(2016),
S. 445
- 454.
D. Lang, E. Povoden-Karadeniz, J. Schatte, W. Knabl, H. Clemens, S. Primig:
"Thermodynamic evaluation of the Mo-rich corner of the Mo-Hf-C system including O impurities";
Journal of Alloys and Compounds,
695
(2017),
S. 372
- 381.
P. Lang, E. Kozeschnik:
"Modellierung und Simulation zur Qualitätsverbesserung und Effizienzsteigerung";
AluReport,
02.2013
(2013),
S. 8
- 9.
P. Lang, M. Lang, A. Falahati, E. Kozeschnik:
"The Effect of Si on the Precipitation Behaviour in Al-Mg-Si Alloys Studied by Thermo-kinetic Simulation and DSC Experiments";
Berg- und Hüttenmännische Monatshefte (BHM),
159
(2013),
3;
S. 116
- 121.
P. Lang, E. Povoden-Karadeniz, A. Falahati, E. Kozeschnik:
"Simulation of the effect of composition on the precipitation in 6xxx Al alloys during continuous-heating DSC";
Journal of Alloys and Compounds,
612
(2014),
S. 443
- 449.
P. Lang, M. Rath, E. Kozeschnik, P. Rivera-Diaz-Del-Castillo:
"Modelling the influence of austenitisation temperature on hydrogen trapping in Nb containing martensitic steels";
Scripta Materialia,
101
(2015),
101;
S. 60
- 63.
P. Lang, Y.V. Shan, E. Kozeschnik:
"The life-time of structural vacancies in the presence of solute trapping";
Materials Science Forum,
794 - 796
(2014),
S. 963
- 970.
P. Lang, T. Weisz, M.R. Ahmadi, E. Povoden-Karadeniz, A. Falahati, E. Kozeschnik:
"Thermo-kinetic simulation of the yield strength evolution of AA7075 during natural aging";
Advanced Materials Research,
922
(2014),
S. 406
- 411.
P. Lang, T. Wojcik, E. Povoden-Karadeniz, A. Falahati, E. Kozeschnik:
"Thermo-kinetic prediction of metastable and stable phase precipitation in Al-Zn-Mg series aluminium alloys during non-isothermal DSC analysis";
Journal of Alloys and Compounds,
609
(2014),
S. 129
- 136.
P. Lang, T. Wojcik, E. Povoden-Karadeniz, E. Kozeschnik et al.:
"Crystal structure and free energy of Ti2Ni3 precipitates in Ti-Ni alloys from first principles";
Computational Materials Science,
93
(2014),
S. 46
- 49.
F. Lasagni, H.P. Degischer, M. Papakyriacou:
"Influence of Solution Treatment, Sr-Modification and Short Fibre Reinforcement on the Eutectic Morphology of Al-Si Alloys";
Praktische Metallographie - Practical Metallography,
43
(2006),
10;
S. 505
- 519.
F. Lasagni, H.P. Degischer, M. Papakyriacou:
"Morphological changes of Si in Al-Si alloys and a short fibre composite";
Kovove Materialy - Metallic Materials,
44
(2006),
S. 65
- 73.
F. Lasagni, M. Dumont, C. Salamida, J. Acuna, H.P. Degischer:
"Dilatometry revealing Si precipitation in Al-Si-alloys";
International Journal of Materials Research,
100
(2009),
7;
S. 1005
- 1013.
F. Lasagni, A. Falahati, H. Mohammadian, H.P. Degischer:
"Precipitation of Si revealed by dilatometry in Al-Si-Cu/Mg alloys";
Kovove Materialy - Metallic Materials,
46
(2008),
1;
S. 1
- 6.
F. Lasagni, A. Lasagni, C. Holzapfel, F. Mücklich, H.P. Degischer:
"Three Dimensional Characterization of Unmodified and Sr-Modified Al-Si Eutectics by FIB and FIB EDX Tomography";
Advanced Materials,
8
(2006),
8;
S. 719
- 723.
F. Lasagni, A. Lasagni, E. Marks, C. Holzapfel, F. Mücklich, H.P. Degischer:
"Three dimensional characterization of "as cast" and solution treated AlSi12(Sr) alloys by high resolution FIB tomography";
Acta Materialia,
55
(2007),
11;
S. 3875
- 3882.
F. Lasagni, B. Mingler, M. Dumont, H.P. Degischer:
"Precipitation kinetics of Si in aluminium alloys";
Materials Science and Engineering A,
480
(2008),
S. 383
- 391.
F. Lasagni, G. Requena, E. Soppa:
"In Situ Measurements of Local Strain in Heterogeneous Materials";
Advanced Engineering Materials,
10
(2008),
1-2;
S. 73
- 78.
H. Lasfargues, T. Glechner, C.M. Koller, V. Paneta, D. Primetzhofer, S. Kolozsvári, D. Holec, H. Riedl, P.H. Mayrhofer:
"Non-reactively sputtered ultra-high temperature Hf-C and Ta-C coatings";
Surface & Coatings Technology,
309
(2017),
S. 436
- 444.
A. Laska, V. Archodoulaki, B. Duscher:
"Failure analysis of retrieved PE-UHMW acetabular liners";
Journal of the Mechanical Behavior of Biomedical Materials,
61
(2016),
S. 70
- 78.
P. Lazar, R. Podloucky, E. Kozeschnik, J. Redinger:
"Density functional theory study of ternary V-Cr-N compounds";
Physical Review B,
78
(2008),
S. 1342021
- 1342028.
C. Ledermüller, E. Kozeschnik, R. Webster, S. Primig:
"Advanced thermo-mechanical process for homogenous hierarchical microstructures in HSLA steels";
Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science,
49
(2019),
12;
S. 5800
- 5815.
D. Leitlmeier, H.P. Degischer, H. Flankl:
"Development of a Foaming Process for Particulate Reinforced Aluminium Melts";
Advanced Materials,
Vol. 4
(2002),
No. 10;
S. 735
- 740.
D. Leitlmeier, H.P. Degischer, H. Flankl:
"Metallurgical prerequisites for the production of cellular aluminium castings direct from the melt";
Casting Plant and Technology International,
19
(2003),
1;
S. 20
- 30.
D. Leitlmeier, H.P. Degischer, H. Flankl:
"Metallurgische Voraussetzungen für die Herstellung von Aluminium-Schaumformteilen aus der Schmelze";
Giesserei,
89
(2002),
11;
S. 33
- 40.
D. Leitlmeier, H.P. Degischer, H. Flankl:
"Voraussetzungen für die Herstellung von Al-Schaumformteilen aus der Schmelze";
It´s Time,
2
(2002),
2;
S. 39
- 47.
K. Leitner, D. Scheiber, S. Jakob, S. Primig, H. Clemens, E. Povoden-Karadeniz, L. Romaner:
"How grain boundary chemistry controls the fracture mode of molybdenum";
Materials & Design,
142
(2018),
S. 36
- 43.
T. Leitner, S. Sackl, B. Völker, H. Riedl, H. Clemens, R. Pippan, A. Hohenwarter:
"Crack path identification in a nanostructured pearlitic steel using atom probe tomography";
Scripta Materialia,
142
(2018),
S. 66
- 69.
D. Li, D. Anghelina, D. Burzic, W. Krieger, E. Kozeschnik:
"Investigation of Decarburization in Spring Steel Production Process - Part II: Simulation";
Steel Research International,
80
(2009),
4;
S. 304
- 310.
D. Li, D. Anghelina, D. Burzic, J. Zamberger, R. Kienreich, H. Schifferl, W. Krieger, E. Kozeschnik:
"Investigation of Decarburization in Spring Steel Production Process - Part I: Experiments";
Steel Research International,
80
(2009),
4;
S. 298
- 303.
Z. Li, A. Ajami, E. Stankevičius, W. Husinsky, G. Račiukaitis, J. Stampfl, R. Liska, A. Ovsianikov:
"3D photografting with aromatic azides: A comparison between three-photon and two-photon case";
Optical Materials,
35
(2013),
S. 1846
- 1851.
Z. Li, N.U Pucher, K. Cicha, J. Torgersen, S. Ligon, A. Ajami, W. Husinsky, A. Rosspeintner, E. Vauthey, S. Naumov, T. Scherzer, J. Stampfl, R. Liska:
"Straightforward Synthesis and Structure-Activity Relationship of Highly Efficient Initiators for Two-Photon Polymerization";
Macromolecules,
46
(2013),
2;
S. 352
- 361.
Z. Li, M. Siklos, N.U Pucher, K. Cicha, A. Ajami, W. Husinsky, A. Rosspeintner, E. Vauthey, G. Gscheidt, J. Stampfl, R. Liska:
"Synthesis and Structure-Activity Relationship of Several Aromatic Ketone-Based Two-Photon Initiators";
Journal of Polymer Science Part A: Polymer Chemistry,
49
(2011),
S. 3688
- 3699.
Z. Li, E. Stankevičius, A. Ajami, G. Račiukaitis, W. Husinsky, A. Ovsianikov, J. Stampfl, R. Liska:
"3D alkyne-azide cycloaddition: spatiotemporally controlled by combination of aryl azide photochemistry and two-photon grafting";
Chemical Communications,
49
(2013),
S. 7635
- 7637.
Z. Li, J. Torgersen, A. Ajami, S. Mühleder, X.H. Qin, W. Husinsky, W. Holnthoner, A. Ovsianikov, J. Stampfl, R. Liska:
"Initiation efficiency and cytotoxicity of novel water-soluble two-photon photoinitiators for direct 3D microfabrication of hydrogels";
RSC Advances,
36
(2013),
S. 15939
- 15946.
H. Lichtenegger, H. Birkedal, D. Casa, J. Cross, S. M. Heald, J.H. Waite, G. D. Stucky:
"Distribution and role of trace metals in copper-mineralized Glycera worm jaw";
Chemistry of Materials,
17
(2005),
S. 2927
- 2931.
H. Lichtenegger, T. Schöberl, M. Bartl, J.H. Waite, G. D. Stucky:
"Response to Comment on: High abrasion resistance with sparse mineralization: copper biomineral in worm jaws";
Science,
301
(2003),
S. 1049b.
H. Lichtenegger, T. Schöberl, J. Ruokolainen, J. Cross, S. M. Heald, H. Birkedal, J.H. Waite, G. D. Stucky:
"Zinc and mechanical prowess in the jaws of Nereis, a sediment worm";
PNAS - Proceedings of the National Academy of Sciences of the United States of America,
100
(2003),
16;
S. 9144
- 9149.
S. Ligon, S. Baudis, F. Nehl, H. Bergmeister, A. Nigisch, J. Stampfl, R. Liska, B. Husar:
"Improved elastomeric materials for CAD/CAM generation of vascular structures in soft tissue replacement therapies";
Journal of Tissue Engineering and Regenerative Medicine,
6
(2012),
Supplement 1;
S. 301.
S. Ligon, R. Liska, J. Stampfl, M. Gurr, R. Mulhaupt:
"Polymers for 3D Printing and Customized Additive Manufacturing";
Chemical Reviews,
117
(2017),
15;
S. 10212
- 10290.
S. Ligon, M. Schwentenwein, C. Gorsche, J. Stampfl, R. Liska:
"Toughening of photo-curable polymer networks: a review";
Polymer Chemistry,
7
(2016),
S. 257
- 286.
E. Lima, A. Pyzalla, W. Reimers, J. Kuo, D. Raabe:
"Mosaic size distributions in an aluminum bi-crystal deformed by channel die plain strain compression";
Journal of Neutron Research,
11
(2003),
S. 209
- 214.
E. Lima, J. Wegener, C. Dalle Donne, G. Goerigk, T. Wroblewski, T. Buslaps, A. Pyzalla, W. Reimers:
"Dependence of the microstructure, residual stresses and texture of AA 6013 friction stir welds on the welding proces";
Zeitschrift für Metallkunde,
94
(2003),
8;
S. 908
- 915.
R. Liska, M. Schuster, R. Inführ, C. Turecek, C. Fritscher, B. Seidl, V. Schmidt, L. Kuna, A. Haase, F. Varga, H. Lichtenegger, J. Stampfl:
"Photopolymers for rapid prototyping";
Journal of Coating Technology and Research,
4
(2007),
4;
S. 505
- 510.
R. Liska, F. Schwager, R. Cano Vives, C. Maier, J. Stampfl:
"Water-soluble photopolymers for rapid prototyping of cellular materials";
Journal of Applied Polymer Science,
97
(2005),
S. 2286
- 2298.
R. Liska, F. Schwager, R. Cano Vives, J. Stampfl:
"New photopolymers for rapid prototyping of cellular structures";
Polymer Preprints,
45
(2004),
S. 77
- 78.
Y Liu, F. Meirer, J. Wang, G. Requena et al.:
"3D elemental sensitive imaging using transmission X-ray microscopy";
Analytical and Bioanalytical Chemistry,
404
(2012),
5;
S. 1297
- 1301.
M. Lückl, O. Caliskanoglu, S. Ilie, J. Six, E. Kozeschnik:
"Impact of Surface Structure Control Cooling during Continuous Casting on Hot Ductility of Microallyed Steel";
Steel Research International,
87
(2016),
S. 871
- 879.
M. Lückl, T. Wojcik, E. Povoden-Karadeniz, S. Zamberger, E. Kozeschnik:
"Co-Precipitation Behavior of MnS and AlN in a Low-Carbon Steel";
Steel Research International,
89
(2018),
3;
S. 1700342
- 1700350.
M. Lückl, S. Zamberger, E. Kozeschnik:
"Kinetics Simulation of MnS Precipitation in Electrical Steel";
Steel Research International,
87
(2016),
S. 271
- 275.
S. Lüftl, V. Archodoulaki, M. Glantschnig, S. Seidler:
"Influence of coloration on initial material properties and on thermooxidative ageing of a polyoxymethylene copolymer";
Journal of Materials Science,
42
(2007),
S. 1351
- 1359.
S. Lüftl, V. Archodoulaki, T. Koch, S. Seidler:
"Effects of the additive package on the thermal properties of a commercial polyoxymethylene homopolymer";
Journal of Vinyl & Additive Technology,
14
(2008),
1;
S. 21
- 27.
S. Lüftl, V. Archodoulaki, S. Seidler:
"Thermal-oxidative induced degradation behaviour of polyoxymethylene (POM) copolymer detected by TGA/MS*";
Polymer Degradation and Stability,
91
(2006),
S. 464
- 471.
S. Lüftl, B. Balluch, W. Smetana, S. Seidler:
"Kinetic study of the polymeric binder burnout in green low temperture co-fired ceramic tapes";
Journal of Thermal Analysis and Calorimetry,
103
(2011),
1;
S. 157
- 162.
M. Lunzer, L. Shi, O.G. Andriotis, P. Gruber, M. Markovic, P.J. Thurner, D. Ossipov, R. Liska, A. Ovsianikov:
"A Modular Approach to Sensitized Two-Photon Patterning of Photodegradable Hydrogels";
Angewandte Chemie,
130
(2018),
46;
S. 15342
- 15347.
M. Lunzer, L. Shi, O.G. Andriotis, P. Gruber, M. Markovic, P.J. Thurner, D. Ossipov, R. Liska, A. Ovsianikov:
"A Modular Approach to Sensitized Two-Photon Patterning of Photodegradable Hydrogels";
Angewandte Chemie International Edition,
57
(2018),
46;
S. 15122
- 15127.
M.H. Luxner, J. Stampfl, H. E. Pettermann:
"Finite Element Modeling Concepts and Linear Analyses of 3D Regular Open Cell Structures";
Journal of Materials Science,
40
(2005),
22;
S. 5859
- 5866.
M.H. Luxner, J. Stampfl, H. E. Pettermann:
"Nonlinear Simulations on the Interaction of Disorder and Defects in Open Cell Structures";
Computational Materials Science,
47
(2009),
2;
S. 418
- 428.
M.H. Luxner, J. Stampfl, H. E. Pettermann:
"Numerical simulations of 3D open cell structures - Influence of structural irregularities on elasto-plasticity and deformation localization";
International Journal of Solids and Structures,
44
(2007),
S. 2990
- 3003.
M.H. Luxner, A. Woesz, J. Stampfl, P. Fratzl, H. E. Pettermann:
"A Finite Element Study on the Effects of Disorder in Cellular Structures";
Acta Biomaterialia,
5
(2009),
S. 381
- 390.
M. Maalekian, E. Kozeschnik:
"A thermodynamic model for carbon trapping in lattice defects";
CALPHAD - Computer Coupling of Phase Diagrams and Thermochemistry,
32
(2008),
S. 650
- 654.
M. Maalekian, E. Kozeschnik:
"Modeling mechanical effects on promotion and retardation of martensitic transformation";
Materials Science and Engineering A,
528
(2010),
S. 1318
- 1325.
M. Maalekian, E. Kozeschnik:
"Modeling the effect of stress and plastic strain on martensite transformation";
Materials Science Forum,
638-642
(2010),
S. 2634
- 2639.
M. Maalekian, R. Radis, M. Militzer, A. Moreau, W. Poole:
"In situ measurement and modelling of austenite grain growth in a Ti/Nb microalloyed steel";
Acta Materialia,
60
(2012),
3;
S. 1015
- 1026.
C. Maier, S. Lüftl, E. Kozeschnik:
"Study of molten metal droplet adhesion to organic anti-spatter coatings";
Science and Technology of Welding and Joining,
19
(2014),
8;
S. 638
- 645.
D. Mandt, P. Gruber, M. Markovic, M. Tromayer, M. Rothbauer, S. Kratz, S. Ali, J. Van Hoorick, W. Halnthoner, S Mühleder, P. Dubruel, S. van Vlierberghe, P. Ertl, R. Liska, A. Ovsianikov:
"Fabrication of placental barrier structures within a microfluidic device utilizing two-photon polymerization";
International Journal of Bioprinting,
4
(2018),
S. 1
- 12.
I. Manjubala, A. Woesz, I. Pilz, M. Rumpler, N. Fratzl-Zelman, P. Roschger, J. Stampfl, P. Fratzl:
"Biomimetic mineral-organic composite scaffolds with controlled internal architecture";
Journal of Materials Science-Materials in Medicine,
16
(2005),
12;
S. 1111
- 1119.
W. Marketz, C. Poletti, H.P. Degischer:
"Ti-Matrix Composites for Future High Performance Applications";
Berg- und Hüttenmännische Monatshefte (BHM),
148
(2003),
9;
S. 376
- 379.
M. Markovic, J. Van Hoorick, K. Hölzl, M. Tromayer, P. Gruber, S. Nürnberger, P. Dubruel, S. Van Vlierberghe, R. Liska, A. Ovsianikov:
"Hybrid Tissue Engineering Scaffolds by Combination of Three-Dimensional Printing and Cell Photoencapsulation";
J. Nanotechnol. Eng. Med,
6
(2015),
2;
S. 021001
- 021008.
E. Marks, G. Requena, H.P. Degischer, E. Boller:
"Microtomography and creep modeling of a short fiber reinforced aluminum piston alloy";
Advanced Engineering Materials,
13
(2011),
3;
S. 199
- 207.
R. Markut-Kohl, V. Archodoulaki, S. Seidler, G. Skrbensky:
"PE-UHMW in hip implants: Properties of Conventional and Crosslinked Prosthetic Components";
Advanced Engineering Materials,
11
(2009),
10;
S. B148
- B154.
R. Martins, L. Lienert, L. Margulies, A. Pyzalla:
"Determination of the radial crystallite microstrain distribution within an AlMg3 torsion sample using monochromatic synchrotron radiation";
Materials Science and Engineering A,
402
(2005),
S. 278
- 287.
A. Mautner, X.H. Qin, B. Kapeller, G. Russmüller, T. Koch, J. Stampfl, R. Liska:
"Efficient Curing of Vinyl Carbonates by Thiol-Ene Polymerization";
Macromolecular Rapid Communications,
33
(2012),
23;
S. 2046
- 2052.
A. Mautner, X.H. Qin, H. Wutzel, B. Kapeller, D. Moser, G. Russmüller, J. Stampfl, R. Liska:
"Thiol-Ene Photopolymerization for Efficient Curing of Vinyl Esters";
Journal of Polymer Science Part A: Polymer Chemistry,
51
(2012),
1;
S. 203
- 212.
A. Mautner, B. Steinbauer, S. Orman, G. Russmüller, K. Macfelda, T. Koch, J. Stampfl, R. Liska:
"Tough photopolymers based on vinyl esters for biomedical applications";
Journal of Polymer Science Part A: Polymer Chemistry,
54
(2016),
13;
S. 1987
- 1997.
A. Mautner, B. Steinbauer, G. Russmüller, R. Lieber, T. Koch, J. Stampfl, R. Liska:
"Vinyl carbonate photopolymers with improved mechanical properties for biomedical applications";
Designed Monomers and Polymers,
19
(2016),
5;
S. 437
- 444.
P.H. Mayrhofer, A Kirnbauer, Ph Ertelthaler, C.M. Koller:
"High-entropy ceramic thin films; A case study on transition metal diborides";
Scripta Materialia,
149
(2018),
149;
S. 93
- 97.
P.H. Mayrhofer, D. Sonnleitner, M. Bartosik, D. Holec:
"Structural and mechanical evolution of reactively and non-reactively sputtered Zr-Al-N thin films during annealing";
Surface & Coatings Technology,
244
(2014),
S. 52
- 56.
P.M. Mayrhofer, C. Eisenmenger-Sittner, H. Euchner, A. Bittner, U. Schmid:
"Influence of c-axis orientation and scandium concentration on infrared active modes of magnetron sputtered ScxAl1-xN thin films";
Applied Physics Letters,
103
(2013).
P.M. Mayrhofer, C. Eisenmenger-Sittner, M. Stöger-Pollach, H. Euchner, A. Bittner, U. Schmid:
"The impact of argon admixture on the c-axis oriented growth of direct current magnetron sputtered ScxAl1xN thin films";
Journal of Applied Physics,
115
(2014),
19; 193505;
S. 1
- 9.
P.M. Mayrhofer, H. Euchner, A. Bittner, U. Schmid:
"Circular test structure for the determination of piezoelectric constants of ScxAl1−xN thin films applying Laser Doppler Vibrometry and FEM simulations";
Sensors and Actuators A: Physical,
222
(2015),
S. 301
- 308.
P.M. Mayrhofer, H. Riedl, H. Euchner, M. Stöger-Pollach, P.H. Mayrhofer, A. Bittner, U. Schmid:
"Microstructure and piezoelectric response of YxAl1−xN thin films";
Acta Materialia,
100
(2015),
S. 81
- 89.
M Messiha, A Frank, T. Koch, F. Arbeiter, G. Pinter:
"Effect of polyethylene and polypropylene cross-contamination on slow crack growth resistance";
International Journal of Polymer Analysis and Characterization,
25
(2020),
8;
S. 649
- 666.
I. Miháliková, M. Friak, N. Koutná, D. Holec, M. Sob:
"An Ab Initio Study of Vacancies in Disordered Magnetic Systems: A Case Study of Fe-Rich Fe-Al Phases";
Materials,
12
(2019),
9, 1430;
S. 1
- 16.
K. Milos, H. Danninger, G. Jangg, H.P. Degischer:
"Mechanical properties and dry sliding wear behaviour of extruded Al-Al2O3 PM composites";
Powder Metall. Progress,
9
(2009),
4;
S. 191
- 204.
S. Mirzaei, M. Alishahi, P. Souček, J. Zenísek, D. Holec, N. Koutná et al.:
"The effect of chemical composition on the structure, chemistry and mechanical properties of magnetron sputtered W-B-C coatings: Modeling and experiments";
Surface & Coatings Technology,
383
(2019),
125274;
S. 1
- 12.
G. Mitteramskogler, R. Gmeiner, R. Felzmann, C. Hofstetter, S. Gruber, J. Stampfl, Ebert, W. Wachter, J. Laubersheimer:
"Light curing strategies for lithography-based additive manufacturing of customized ceramics";
Additive Manufacturing,
1
(2014),
1;
S. 110
- 118.
M. Mitterbauer, P. Knaack, S. Naumov, M. Markovic, A. Ovsianikov, N. Moszner, R. Liska:
"Acylstannane: Spaltbare und hochreaktive Photoinitiatoren für radikalische Photopolymerisationen bei Wellenlängen über 500 nm mit exzellentem Photobleaching";
Angewandte Chemie,
130
(2018),
37;
S. 12323
- 12327.
M. Mitterbauer, P. Knaack, S. Naumov, M. Markovic, A. Ovsianikov, N. Moszner, R. Liska:
"Acylstannanes: Cleavable and Highly Reactive Photoinitiators for Radical Photopolymerization at Wavelengths above 500 nm with Excellent Photobleaching Behavior";
Angewandte Chemie - International Edition,
57
(2018),
37;
S. 12146
- 12150.
A. Monfared, G. Mitteramskogler, S. Gruber, K. Salisbury, J. Stampfl, N. Blevins:
"High-Fidelity, Inexpensive Surgical Middle Ear Simulator";
Otology & Neurotology,
33
(2012),
9;
S. 1573
- 1577.
V. Moraes, H. Bolvardi, S. Koloszvári, H. Riedl, P.H. Mayrhofer:
"Thermal stability and mechanical properties of Ti-Al-B-N thin films";
International Journal of Refractory Metals & Hard Materials,
71
(2018),
S. 320
- 324.
V. Moraes, C. Fuger, V. Paneta, D. Primetzhofer, P. Polcik, H. Bolvardi, M. Arndt, H. Riedl, P.H. Mayrhofer:
"Substoichiometry and tantalum dependent thermal stability of α-structured W-Ta-B";
Scripta Materialia,
155
(2018),
S. 5
- 10.
V. Moraes, H. Riedl, C. Fuger, P. Polcik, H. Bolvardi, D. Holec, P.H. Mayrhofer:
"Ab initio inspired design of ternary boride thin films";
Scientific Reports,
8
(2018),
9288;
S. 1
- 9.
V. Moraes, H. Riedl, R. Rachbauer, S. Kolozsvari, M. Ikeda, L. Prochaska, S. Paschen, P.H. Mayrhofer:
"Thermal conductivity and mechanical properties of AlN-based thin films";
Journal of Applied Physics,
119
(2016),
S. 225304-1
- 225304-10.
V. Moraes, L. Zauner, T. Wojcik, M. Arndt, P. Polcik, H. Riedl, P.H. Mayrhofer:
"Thermally stable superhard diborides: An ab initio guided case study for V-W-diboride thin films";
Acta Materialia,
186
(2020),
186;
S. 487
- 493.
P.J. Morais, B Gomes, P. Santos, M. Gomes, R. Gradinger, M. Schnall, S. Bozorgi, T. Klein, D. Fleischhacker, P. Warczok, A. Falahati:
"Characterisation of a High-Performance Al-Zn-Mg-Cu Alloy Designed for Wire Arc Additive Manufacturing";
Materials,
13
(2020),
7, 1610.
F Moszner, E. Povoden-Karadeniz, S Pogatscher, P.J. Uggowitzer, Y. Estrin, Ssa Gerstl, E. Kozeschnik, Jf Löffler:
"Reverse alpha' -> gamma transformation mechanisms of martensitic Fe-Mn and age-hardenable Fe-Mn-Pd alloys upon fast and slow continuous heating";
Acta Materialia,
72
(2014),
S. 99
- 109.
S. Muehleder, A. Ovsianikov, J. Zipperle, H. Redl, W Holnthoner:
"Connections matter: channeled hydrogels to improve vascularization";
Frontiers in Bioengineering and Biotechnology,
2
(2014),
S. #.
T.H. Nam, G. Requena, H.P. Degischer:
"Modelling and Numerical Computation of Thermal Expansion of Aluminium Matrix Composite with Densely Packed SiC Particles";
Technische Mechanik,
28
(2008),
Heft 3-4;
S. 259
- 267.
T.H. Nam, G. Requena, H.P. Degischer:
"Thermal expansion behaviour of aluminum matrix composites with densely packed SiC particles";
Composites Part A: Applied Science and Manufacturing,
39
(2008),
5;
S. 856
- 865.
V. Nedelkovski, R Hahn, P.H. Mayrhofer, A. Steiger-Thirsfeld, J. Bernardi, P.J. Thurner:
"Influence of experimental constraints on micromechanical assessment of micromachined hard-tissue samples";
Journal of the Mechanical Behavior of Biomedical Materials,
106
(2020),
103741.
M. Nöhrer, W. Mayer, S. Primig, S. Zamberger, E. Kozeschnik, H. Leitner:
"Influence of Deformation on the Precipitation Behavior of Nb(CN) in Austenite and Ferrite";
Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science,
45A
(2014),
Sept;
S. 4210
- 4219.
M. Nöhrer, W. Mayer, S. Zamberger, E. Kozeschnik, H. Leitner:
"Precipitation Behavior of Strain- Induced V Precipitates in Ferrite at Different Temperatures in a 0.2 wt% Carbon Steel";
Steel Research International,
85
(2014),
4;
S. 679
- 688.
A. Örs-Ünsal, V. Archodoulaki:
"Comparison of In-Vivo Performance Characteristics of First- Generation and Second-Generation Cross-Linked and Conventional Explants";
Journal Of Arthroplasty.,
xxx
(2020),
S. 1
- 8.
S. Orman, C. Hofstetter, A. Aksu, F. Reinauer, R. Liska, S. Baudis:
"Toughness enhancers for bone scaffold materials based on biocompatible photopolymers";
Journal of Polymer Science Part A: Polymer Chemistry,
56
(2018),
24;
S. 110
- 119.
A. Ovsianikov, Z. Li, A. Ajami, J. Torgersen, W. Husinsky, J. Stampfl, R. Liska:
"3D grafting via three-photon induced photolysis of aromatic azides";
Applied Physics A: Materials Science & Processing,
108
(2012),
1;
S. 29
- 34.
A. Ovsianikov, Z. Li, J. Torgersen, J. Stampfl, R. Liska:
"Selective Functionalization of 3D Matrices Via Multiphoton Grafting and Subsequent Click Chemsitry";
Advanced Functional Materials,
22
(2012),
16;
S. 3429
- 3433.
A. Ovsianikov, V. Mironov, J. Stampfl, R. Liska:
"Engineering 3D cell-culture matrices: multiphoton processing technologies for biological and tissue engineering applications";
Expert Review of Medical Devices (eingeladen),
9
(2012),
6;
S. 613
- 633.
A. Ovsianikov, S Mühleder, J. Torgersen, X.H. Qin, L. Zhiquan, S. Van Vlierberghe, P. Dubruel, W Holnthoner, H. Redl, R. Liska, J. Stampfl:
"Laser Photofabrication of Cell-Containing Hydrogel Constructs";
Langmuir,
30
(2014),
13;
7 S.
S. Pailhes, H. Euchner, V. Giordano, R. Debord, A. Assy, S. Gomes, A. Bosak, D. Machon, S. Paschen, M. de Boissieu:
"Localization of Propagative Phonons in a Perfectly Crystalline Solid";
Physical Review Letters,
113
(2014),
2.
M Palmstingl, T. Koch, D. Salaberger, T. Paier:
"Morphological impact on the fatigue behaviour of short fibre reinforced polypropylene";
Materials Science Forum,
825 - 826
(2015),
S. 830
- 837.
I. Panaitescu, T. Koch, V. Archodoulaki:
"Accelerated aging of a glass fiber/polyurethane composite for automotive applications";
Polymer Testing,
74
(2019),
S. 245
- 256.
I. Panaitescu, T. Koch, V. Archodoulaki:
"Effects of Temperature, Humidity and Automotive Fluids Exposure on Glass Fiber/Polyurethane Composites";
Polymer Composites,
40
(2019),
6;
S. 2357
- 2367.
J. Paulitsch, R. Rachbauer, J. Ramm, P. Polcik, P.H. Mayrhofer:
"Influence of Si on the target oxide poisoning during reactive arc evaporation of (Al,Cr)2O3 coatings";
Vacuum,
100
(2014),
S. 29
- 32.
A. Pauschitz, S Kvasnica, R Jisa, J. Bernardi, T. Koch, M. Roy:
"Tribological behaviour of Ti containing nanocomposite DLC film under milli-Newton load range";
Diamond and Related Materials,
17
(2008),
12;
S. 2010
- 2018.
A. Pauschitz, J. Schalko, T. Koch, C. Eisenmenger-Sittner, S. Kvasnica, M. Roy:
"Nanoindentation and AFM studies of PECVD DLC and reactively sputtered Ti containing carbon films";
Bulletin of Materials Science,
26
(2003),
6;
S. 585
- 591.
G. Peer, P. Dorfinger, T. Koch, J. Stampfl, C. Gorsche, R. Liska:
"Photopolymerization of Cyclopolymerizable Monomers and Their Application in Hot Lithography";
Macromolecules,
51
(2018),
22;
S. 9344
- 9353.
B. Pérez-Köhler, G Pascual, S. Benito-Martínez, J. Manuel Bellón, D. Eglin, O. Guillaume:
"Thermo‐Responsive Antimicrobial Hydrogel for the In‐Situ Coating of Mesh Materials for Hernia Repair";
Polymers,
12
(2020),
S. 1425
- 1440.
M. Petrica, B. Duscher, T. Koch, V. Archodoulaki:
"Impact of surface roughness and contact pressure on wear behaviour of PEEK, POM, and PE-UHMW";
International Journal Of Surface Science And Engineering,
11 (1)
(2017),
S. 65
- 84.
M. Petrica, B. Duscher, T. Koch, V. Archodoulaki:
"Studies on tribological behavior of PEEK and PE-UHMW";
AIP Conference Proceedings - American Institute of Physics,
1779
(2016),
1;
5 S.
M. Petrica, B. Duscher, T. Koch, V. Archodoulaki:
"Tribological investigations on virgin and accelerated aged PE-UHMW";
Tribology International,
87
(2015),
S. 151
- 159.
P. Petrochenko, J. Torgersen, P. Gruber, L. Hicks, J. Zheng, G. Kumar, R. Narayan, P. Goering, R. Liska, J. Stampfl, A. Ovsianikov:
"Laser 3D Printing with Sub‐Microscale Resolution of Porous Elastomeric Scaffolds for Supporting Human Bone Stem Cells";
Advanced Healthcare Materials,
#
(2014),
#;
S. #.
M. Pfaffinger, M. Hartmann, M. Schwentenwein, J. Stampfl:
"Stabilization of tricalcium phosphate slurries against sedimentation for stereolithographic additive manufacturing and influence on the final mechanical properties";
International Journal of Applied Ceramic Technology,
14
(2017),
4;
S. 499
- 506.
M. Pfeiler-Deutschmann, P.H. Mayrhofer, K. Chladil, M. Penoy, C. Michotte, M. Kathrein, C. Mitterer:
"Effect of wavelength modulation of arc evaporated Ti-Al-N/Ti-Al-V-N multilayer coatings on microstructure and mechanical/tribological properties";
Thin Solid Films,
581
(2015),
S. 20
- 24.
H. Pinto, G. Bruno:
"Formation and Relaxation of Coherency Strain in the Nickel-base Superalloy SC16 ";
Journal of Synchrotron Radiation,
10
(2003),
S. 148
- 153.
H. Pinto, A. Pyzalla, K. Assmus, W. Hübner, R. Büscher, A. Fischer:
"The Effect of Hydrogen on the Deterioration of Austenitic Steels during Wear at Cryogenic Temperature";
Wear,
259
(2005),
S. 424
- 431.
H. Pinto, A. Pyzalla, W. Hübner, K. Assmus:
"Influence of environment, temperature and chemical composition on the microstructural deterioration of CrNi steels during friction";
Materialwissenschaft und Werkstofftechnik,
35
(2004),
10/11;
S. 716
- 721.
H. Pinto, A. Pyzalla, W. Reimers, T. Buslaps, V. Honkimäki, L. Zhang, Y. Dabin:
"Investigation of Synchrotron Radiation induced Damage in Thermal Aluminium Absorbers";
Materials Science and Technology,
21
(2005),
S. 19
- 26.
H. Pinto, A. Pyzalla, W. Reimers, T. Buslaps, V. Honkimäki, L. Zhang, Y. Dabin:
"Microstructural Damage in Thermal Absorbers induced by High Energy Synchrotron Light Irradiation";
Journal of Neutron Research,
12
(2004),
S. 189
- 194.
J. Pörnbacher, H. Leitner, P. Angerer, T. Wojcik, S. Marsoner, G. Ressel:
"TiC-(Ti,M)C core-rim structures in solid-state manufactured steel-based MMCs";
Materials Characterization,
156
(2019),
109880;
S. 1
- 8.
S Pogatscher, E. Kozeschnik, H. Antrekowitsch, M. Werinos, Ssa Gerstl, Jf Löffler, P.J. Uggowitzer:
"Process-controlled suppression of natural aging in an Al-Mg-Si alloy";
Scripta Materialia,
89
(2014),
S. 53
- 56.
C. Poletti, B. Balog, T. Schubert, V. Liedtke, C. Edtmaier:
"Production of titanium matrix composites reinforced with SiC particles";
Composites Science and Technology,
Volume 68
(2008),
Issue 9;
S. 2171
- 2177.
C. Poletti, M. Balog, F. Simancik, H.P. Degischer:
"High-temperature strength of compacted sub-micrometer";
Acta Materialia,
58
(2010),
10;
S. 3781
- 3789.
C. Poletti, H.P. Degischer, S. Kremmer, W. Marketz:
"Processing maps of Ti662 unreinforced and reinforced with TiC particles according to dynamic models";
Materials Science and Engineering A,
486
(2008),
1-2;
S. 127
- 137.
C. Poletti, H. Dieringa, F. Warchomicka:
"Local deformation and processing maps of as-cast AZ31 alloy";
Materials Science and Engineering A,
516
(2009),
1-2;
S. 138
- 147.
C. Poletti, G. Hoeltl:
"Mechanical properties of particle reinforced titanium and titanium alloys";
Kovove Materialy - Metallic Materials,
48
(2010),
2;
S. 87
- 95.
C. Poletti, A. Merstallinger, T. Schubert, W. Marketz, H.P. Degischer:
"Wear and Friction Coefficient of Particle Reinforcd Ti-alloys";
Materialwissenschaft und Werkstofftechnik,
35
(2004),
10/11;
S. 741
- 749.
C. Poletti, G. Requena, D. Tolnai, P. Cloetens, A. Steiger-Thirsfeld:
"Characterization of the microstructure and damage mechanisms in a Ti6Al4V alloy modified with 1 wt.% B";
Journal of Materials Research,
101
(2010),
S. 1151
- 1157.
C. Poletti, M. Rodríguez-Hortalá, M. Hauser, C. Sommitsch:
"Microstructure development in hot deformed AA6082";
Materials Science and Engineering A,
A
(2010),
528;
S. 2413
- 2430.
C. Poletti, F. Warchomicka, H.P. Degischer:
"Local deformation of Ti6Al4V modified 1 wt% B and 0.1 wt% C";
Materials Science and Engineering A,
527
(2010),
4-6;
S. 1109
- 1116.
C. Poletti, F. Warchomicka, R. Okruch, H. Knoblich:
"Microstructural features of AZ31 deformed at high temperatures";
Praktische Metallographie - Practical Metallography,
47
(2010),
10;
S. 3781
- 3789.
C. Poletti, T. Wojcik, C. Sommitsch:
"Hot Deformation of AA6082 Containing Fine Intermetallic Particles";
Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science,
online first
(2012),
S. 1
- 10.
R. Popp, S. Haas, F. Scherm, A. Redermeier, E. Povoden-Karadeniz, T. Göhler, U. Glatzel:
"Determination of solubility limits of refractory elements in TCP phases of the Ni-Mo-Cr ternary system using multiples";
Journal of Alloys and Compounds,
788
(2019),
5;
S. 67
- 74.
A. Porabka, V. Archodoulaki, W. Molnar, J. Laska:
"Wear behaviour of polyurethane composites with respect to the other mechanical properties";
World Journal of Engineering,
11
(2014),
2;
S. 139
- 146.
E. Povoden-Karadeniz, M. Chen, T. Ivas, A. Grundy, L.J. Gauckler:
"Thermodynamic modeling of La2O3-SrO-Mn2O3-Cr2O3 for solid oxide fuel cell applications";
Journal of Materials Research,
27
(2012),
15;
S. 1915
- 1926.
E. Povoden-Karadeniz, D. Cirstea, P. Lang, T. Wojcik, E. Kozeschnik:
"Thermodynamics of Ti-Ni shape memory alloys";
CALPHAD - Computer Coupling of Phase Diagrams and Thermochemistry,
41
(2013),
10;
S. 128
- 139.
E. Povoden-Karadeniz, E. Eidenberger, P. Lang, G. Stechauner, H. Leitner, E. Kozeschnik:
"Simulation of precipitate evolution in Fe-25 Co-15 Mo with Si addition based on computational thermodynamics";
Journal of Alloys and Compounds,
587
(2014),
S. 158
- 170.
E. Povoden-Karadeniz, E. Kozeschnik:
"Simulation of Precipitation Kinetics and Precipitation Strengthening of B2-precipitates in Martensitic PH 13-8 Mo Steel";
ISIJ International,
52
(2012),
4;
S. 610
- 615.
E. Povoden-Karadeniz, P. Lang, F Moszner, S Pogatscher, A. Ruban, P.J. Uggowitzer, E. Kozeschnik:
"Thermodynamics of Pd-Mn phases and extension to the Fe-Mn-Pd system";
CALPHAD - Computer Coupling of Phase Diagrams and Thermochemistry,
51
(2015),
S. 314
- 333.
E. Povoden-Karadeniz, P. Lang, P. Warczok, A. Falahati, W. Jun, E. Kozeschnik:
"CALPHAD modeling of metastable phases in the Al-Mg-Si system";
CALPHAD - Computer Coupling of Phase Diagrams and Thermochemistry,
43
(2013),
12;
S. 94
- 104.
S. Primig, H. Leitner, E. Kozeschnik:
"Early Stages of Precipitation: Experiments and Modelling";
Berg- und Hüttenmännische Monatshefte (BHM),
159
(2014),
1;
S. 5
- 11.
S. Primig, G. Stechauner, E. Kozeschnik:
"Early Stages of Cu Precipitation in 15 - 5 PH Maraging Steel Revisited - Part I: Experimental Analysis";
Steel Research International,
88
(2017),
1;
S. 1
- 10.
N.U Pucher, A. Rosspeintner, V. Satzinger, V. Schmidt, G. Gescheidt, J. Stampfl, R. Liska:
"Structure-Activity Relationship in D-π-A-π-D-Based Photoinitiators for the Two-Photon-Induced Photopolymerization Process";
Macromolecules,
42
(2009),
S. 6519
- 6528.
N.U Pucher, M. Siklos, A. Rosspeintner, A. Ajami, K. Cicha, G. Gscheidt, W. Husinsky, J. Stampfl, R. Liska:
"Optimization of feature resolution, processing window & structuring time for the two-photon polymerization (2PP) process by the use of novel initiators";
Proc. of LPM2010 - the 11th International Symposium on Laser Precision Microfabrication,
-
(2010),
S. 1
- 6.
M. Pudar, S. Zamberger, K. Spiradek-Hahn, R. Radis, E. Kozeschnik:
"Computational Analysis of Precipitation during Continuous Casting of Microalloyed Steel";
Steel Research International,
81
(2010),
5;
S. 372
- 380.
A. Pyzalla, B. Camin, T. Buslaps, M. Di Michiel, H. Kaminski, A. Kottar, A. Pernack, W. Reimers:
"Simultaneous Tomography and Diffraction Analysis of Creep Damage";
Science,
308
(2005),
S. 92
- 95.
A. Pyzalla, B. Camin, T. Buslaps, M. Di Michiel, H. Kaminski, A. Kottar, A. Pernack, W. Reimers:
"Tomography and Diffraction Analysis of Creep in a Multiphase Brass (Simultaneous Tomography and Diffraction Analysis of Creep Damage) - Supporting Online Material: Materials and Methods; Figs. S1 to S6; Movies S1 and S2";
Science (Online Issue),
http://www.sciencemag.org/cgi/content/full/308/571
(2005),
5718;
11 S.
A. Pyzalla, B. Reetz, A. Jaques, J. Feiereisen, O. Ferry, T. Buslaps, W. Reimers:
"In-situ Investigation of Stress Relaxation in Al/Si - MMCs using High Energy Synchrotron Radiation";
Zeitschrift für Metallkunde,
95
(2004),
7;
S. 624
- 629.
A. Pyzalla, B. Reetz, A. Jaques, J. Feiereisen, O. Ferry, T. Buslaps, W. Reimers:
"Relaxation of Phase Specific Elastic Strains/Stresses During Deformation of Al/Si - MMCs";
Journal of Neutron Research,
12
(2004),
S. 135
- 140.
A. Pyzalla, W. Reimers:
"Kriechschädigung dreidimensional sichtbar gemacht";
Physik in unserer Zeit,
36
(2005),
4;
S. 155
- 156.
L. Qin, C. Dellago, E. Kozeschnik:
"An efficient method to reconstruct free energy profiles for diffusive processes in transition interface sampling and forward flux sampling simulations";
Journal of Chemical Physics,
150
(2019),
150, 094114;
S. 1
- 11.
L. Qin, A. Redermeier, C. Dellago, E. Kozeschnik, C. Karner:
"Rigid-lattice Monte Carlo study of nucleation kinetics in dilute bcc Fe- Cu alloys using statistical sampling techniques";
Acta Materialia,
159
(2018),
S. 429
- 438.
X.H. Qin, P. Gruber, M. Markovic, B. Plochberger, E. Klotzsch, J. Stampfl, A. Ovsianikov, R. Liska:
"Enzymatic synthesis of hyaluronic acid vinyl esters for two-photon microfabrication of biocompatible and biodegradable hydrogel constructs";
Polymer Chemistry,
5
(2014),
22;
S. 6523
- 6533.
X.H. Qin, A. Ovsianikov, J. Stampfl, R. Liska:
"Additive manufacturing of photosensitive hydrogels for tissue engineering applications";
BioNanoMaterials,
15
(2014),
3-4;
S. 49
- 70.
X.H. Qin, J. Torgersen, R. Saf, S. Mühleder, N.U Pucher, S. Ligon, W. Holnthoner, H. Redl, A. Ovsianikov, J. Stampfl, R. Liska:
"Three-Dimensional Microfabrication of Protein Hydrogels via Two-Photon-Excited Thiol-Vinyl Ester Photopolymerization";
Journal of Polymer Science Part A: Polymer Chemistry,
51
(2013),
S. 4799
- 4810.
R. Raab, C.M. Koller, S. Koloszvári, J. Ramm, P.H. Mayrhofer:
"Thermal stability of arc evaporated Al-Cr-O-N coatings";
Surface & Coatings Technology,
356
(2018),
356;
S. 64
- 71.
R. Raab, C.M. Koller, S. Kolozsvári, J. Ramm, P.H. Mayrhofer:
"Thermal stability of arc evaporated Al-Cr-O and Al-Cr-O/ Al-Cr-N multilayer coatings";
Surface & Coatings Technology,
352
(2018),
352;
S. 213
- 221.
R. Raab, C.M. Koller, H. Riedl, S. Kolozsvári, J. Ramm, P.H. Mayrhofer:
"The influence of synthetic air flow on the properties of arc evaporated Al-Cr-O-N coatings";
Thin Solid Films,
688
(2019),
137252;
S. 1
- 8.
N. Radic, B. Pivac, F. Meinardi, T. Koch:
"Raman study of carbon clusters in W-D thin films";
Materials Science and Engineering A,
396
(2005),
S. 290
- 295.
R. Radis, E. Kozeschnik:
"Concurrent Precipitation of AlN and VN in Microalloyed Steel";
Steel Research International,
81
(2010),
8;
S. 681
- 685.
R. Radis, E. Kozeschnik:
"Kinetics of AlN Precipitation in Microalloyed Steel";
Modelling and Simulation in Materials Science and Engineering,
18
(2010),
055003;
S. 1
- 16.
R. Radis, E. Kozeschnik:
"Numerical simulation of NbC precipitation in microalloyed steel";
Modelling and Simulation in Materials Science and Engineering,
20
(2012),
S. 055010
- 055024.
R. Radis, E. Kozeschnik:
"Precipitation Kinetics of Aluminium Nitride in Austenite in Microalloyed HSLA Steels";
Materials Science Forum,
636-637
(2010),
S. 605
- 611.
R. Radis, M. Schaffer, M. Albu, G. Kothleitner, P. Pölt, E. Kozeschnik:
"Multimodal size distributions of γ' precipitates during continuous cooling of UDIMET 720 Li";
Acta Materialia,
57
(2009),
19;
S. 5739
- 5747.
R. Radis, C. Schlacher, E. Kozeschnik, P. Mayr, N. Enzinger, H. Schröttner, C. Sommitsch:
"Loss of Ductility Caused by AlN Precipitation in Hadfield Steel";
Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science,
43A
(2012),
S. 1132
- 1139.
R. Radis, S. Schwarz, S. Zamberger, E. Kozeschnik:
"AlN Precipitation During Isothermal Annealing of Ultra Low Carbon Steel";
Steel Research International,
82
(2011),
8;
S. 905
- 910.
R. Radis, G. Zickler, M. Stockinger, C. Sommitsch, E. Kozeschnik:
"Interaction of the Precipitation Kinetics of Delta and Gamma' Phases in Nickel-Base Superalloy ATI Allvac 718 Plus";
Materials Science Forum,
638-642
(2010),
S. 2712
- 2717.
P. Radovanovic, M. Kellner, J. Matovic, R. Liska, T. Koch:
"Asymmetric membranes with interpenetrating proton-conducting morphology made by a combination of immersion precipitation and photopolymerization";
Journal of Membrane Science,
401-402
(2012),
S. 254
- 261.
S. Rajput, M. Dikovits, G. Chaudhari, C. Poletti, F. Warchomicka, S. Pancholi:
"Physical simulation of hot deformation and microstructural evolution of AISI 1016 steel using processing maps";
Materials Science and Engineering A,
587
(2013),
S. 291
- 300.
T. Rath, O. Martl, B. Steyrer, K. Seidler, R. Addison, E. Holzhausen, J. Stampfl:
"Developing an ivory-like material for stereolithography-based additive manufacturing";
Applied Materials Today,
23
(2021),
101016.
S. Reisinger, E. Kozeschnik, G. Ressel, J. Keckes, A. Stark, S. Marsoner, R. Ebner:
"Strain energy contributions on the bainitic phase transformation in a CrMoV steel during continuous cooling";
Materials & Design,
155
(2018),
155;
S. 475
- 484.
T Ren, W. Steiger, P. Chen, A. Ovsianikov, U. Demirci:
"Enhancing cell packing in buckyballs by acoustofluidic activation";
Biofabrication,
12
(2020).
G. Requena:
"Sub-micrometer holotomography of multiphase metals";
ESRF Highlights (eingeladen),
1
(2010),
-;
S. 112
- 114.
G. Requena, B. Bauer, H.P. Degischer, M. Lieblich:
"The effect of ball milling and wet blending on the creep behaviour of a particle reinforced 2124 Al-alloy";
International Journal of Materials Research,
102
(2011),
8;
S. 982
- 992.
G. Requena, D. Canelo Yubero, J. Corrochano:
"Stress relaxation during thermal cycling of particle reinforced aluminium matrix composites";
Composites Part A: Applied Science and Manufacturing,
43
(2012),
S. 1981
- 1988.
G. Requena, P. Cloetens, W. Altendorfer, C. Poletti, D. Tolnai, F. Warchomicka, H.P. Degischer:
"Sub-micrometer synchrotron tomography of multiphase metals using Kirkpatrick-Baez optics";
Scripta Materialia,
61
(2009),
7;
S. 760
- 763.
G. Requena, H.P. Degischer:
"Creep behavior of unreinforced and short fibre reinforced AlSi12CuMgNi piston alloy";
Materials Science and Engineering A,
420
(2006),
S. 265
- 275.
G. Requena, H.P. Degischer:
"Effects of particle reinforcement on creep behaviour of AlSi1MgCu";
Zeitschrift für Metallkunde,
96
(2005),
7;
S. 805
- 811.
G. Requena, H.P. Degischer:
"Three-Dimensional Architecture of Engineering Multiphase Metals";
Annual Review of Materials Research (eingeladen),
42
(2012),
S. 151
- 161.
G. Requena, H.P. Degischer, E. Marks, E. Boller:
"Entwicklung der Konnektivität der Phasen in einer kurzfaserverstärkten Aluminium-Kolbenlegierung unter Kriechbelastung (Developing connectivity of the phases in a short fibre reinforced aluminium piston alloy subjected to creep)";
Materialwissenschaft und Werkstofftechnik,
38
(2007),
11;
S. 885
- 893.
G. Requena, H.P. Degischer, E. Marks, E. Boller:
"Microtomographic study of the evolution of microstructure during creep of an AlSi12CuMgNi alloy reinforced with Al2O3 short fibres";
Materials Science and Engineering A,
487
(2008),
Issue 1-2;
S. 99
- 107.
G. Requena, G. Fiedler, B. Seiser, H.P. Degischer, M. di Michiel, T. Buslaps:
"3D-Quantification of the distribution of continuous fibres in unidirectionally reinforced composites";
Composites Part A: Applied Science and Manufacturing,
40
(2009),
2;
S. 152
- 163.
G. Requena, G. Garces, Z. Asghar, E. Marks, P. Staron, P. Cloetens:
"The effect of the connectivity of rigid phases on strength of Al-Si alloys";
Advanced Engineering Materials,
13
(2011),
8;
S. 674
- 684.
G. Requena, G. Garces, S. Danko, T. Pirling, E. Boller:
"The effect of eutectic Si on the strength of short fibre reinforced Al";
Acta Materialia,
57
(2009),
11;
S. 3199
- 3210.
G. Requena, G. Garces, M. Rodriguez, T. Pirling, P. Cloetens:
"3D Architecture and load partition in eutectic Al-Si alloys";
Advanced Engineering Materials,
11
(2009),
12;
S. 1007
- 1014.
G. Requena, E. Maire, C. Leguen, S. Thuillier:
"Separation of nucleation and growth of voids during tensile deformation of a dual phase steel using synchrotron microtomography";
Materials Science and Engineering A,
589
(2014),
-;
S. 242
- 251.
G. Requena, D. Telfser, C. Hörist, H.P. Degischer:
"Creep behaviour of AA 6061 alloy and AA 6061 metal matrix composite";
Materials Science and Technology,
Vol. 18
(2002),
S. 515
- 521.
P. Retzl, E. Kozeschnik, W. Mayer, D. Krizan:
"Simulation of Carbo‐Nitride Precipitation in the Multi‐Phase Microstructure of Micro‐Alloyed Transformation‐Induced Plasticity Steel";
Steel Research International,
92
(2021),
2000197.
P. Retzl, E. Kozeschnik, S. Zamberger:
"Computational analysis of austenite film thickness and C-redistribution in carbide-free bainite";
Materials Research Express,
8
(2021),
076502.
R. Rezende, F. Pereira, V. Kasyanov, A. Ovsianikov, J. Torgersen, P. Gruber, J. Stampfl, K. Brakke, J. Nogueiraa, V. Mironov, J. da Silva:
"Design, physical prototyping and initial characterisation of `lockyballs´";
Virtual and Physical Prototyping,
7
(2012),
S. 287
- 301.
H. Riedl, E. Aschauer, C.M. Koller, P. Polcik, M. Arndt, P.H. Mayrhofer:
"Ti-Al-N/Mo-Si-B multilayers: An architectural arrangement for high temperature oxidation resistant hard coatings";
Surface & Coatings Technology,
328
(2017),
S. 80
- 88.
H. Riedl, T. Glechner, T. Wojcik, N. Koutná, S. Kolozsvári, V. Paneta, D. Holec, D. Primetzhofer, P.H. Mayrhofer:
"Influence of carbon deficiency on phase formation and thermal stability of super-hard TaCy thin films";
Scripta Materialia,
149
(2018),
149;
S. 150
- 154.
H. Riedl, D. Holec, R. Rachbauer, P. Polcik, R. Hollerweger, J. Paulitsch, P.H. Mayrhofer:
"Phase stability, mechanical properties and thermal stability of Y alloyed Ti-Al-N coatings";
Surface & Coatings Technology,
235
(2013),
0;
S. 174
- 180.
H. Riedl, C.M. Koller, A. Limbeck, J Kalas, P. Polcik, P.H. Mayrhofer:
"Oxidation behavior and tribological properties of multilayered Ti-Al-N/Mo-Si-B thin films";
Journal of Vacuum Science & Technology A,
33
(2015),
5;
S. 05E129-1
- 05E129-9.
H. Riedl, C.M. Koller, F. Munnik, H. Hutter, F. Mendez Martin, R. Rachbauer, S. Kolozsvári, M. Bartosik, P.H. Mayrhofer:
"Influence of oxygen impurities on growth morphology, structure and mechanical properties of Ti-Al-N thin films";
Thin Solid Films,
603
(2016),
S. 39
- 49.
H. Riedl, A. Vieweg, A. Limbeck, J Kalas, M. Arndt, P. Polcik, H. Euchner, M. Bartosik, P.H. Mayrhofer:
"Thermal stability and mechanical properties of boron enhanced Mo-Si coatings";
Surface & Coatings Technology,
280
(2015),
S. 282
- 290.
H. Riedl, J. Zálesák, M. Arndt, P. Polcik, D. Holec, P.H. Mayrhofer:
"Ab initio studies on the adsorption and implantation of Al and Fe to nitride materials";
Journal of Applied Physics,
118
(2015),
12;
S. 125306-1
- 125306-8.
F. Riedlsperger, B. Gsellmann, E. Povoden-Karadeniz, O. Tasso, S. Matera, M. Domankova, F. Kauffmann, E. Kozeschnik, B. Sonderegger:
"Thermodynamic Modelling and Microstructural Study of Z-Phase Formation in a Ta-Alloyed Martensitic Steel";
Materials,
14
(2021),
6;
S. ##.
N. Ritter, R. Sowa, J. Schauer, D. Gruber, T. Göhler, R. Rettig, E. Povoden-Karadeniz et al.:
"Effects of solid solution strengthening elements Mo, Re, Ru, and W on transition temperatures in nickel-based superalloys with high gamma´-volume fraction: comparison of experiment and calphad calculations";
Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science,
49
(2018),
8;
S. 3206
- 3216.
M. Rosenauer, E. Weber, J. Stampfl, M. Vellekoop:
"Optofluidische Komponenten in der Flüssigkeitssensorik";
TM - Technisches Messen,
77
(2010),
2;
S. 89
- 94.
S. Rotman, T. Moriarty, B. Nottelet, D. Grijpma, D. Eglin, O. Guillaume:
"Poly(Aspartic Acid) Functionalized Poly(ϵ-Caprolactone) Microspheres with Enhanced Hydroxyapatite Affinity as Bone Targeting Antibiotic Carriers";
Pharmaceutics,
12
(2020),
S. 885.
M. Roy, S Ghodbane, T. Koch, A. Pauschitz, D. Steinmüller-Nethl, A Tomala, C Tomastik, F. Franek:
"Tribological investigation of nanocrystalline diamond films at low load under different tribosystems";
Diamond and Related Materials,
20
(2011),
4;
S. 573
- 583.
M. Roy, T. Koch, A. Pauschitz:
"The influence of sputtering procedure on nanoindentation and nanoscratch behaviour of W-S-C film";
Applied Surface Science,
256
(2010),
22;
S. 6850
- 6858.
M. Roy, A. Pauschitz, J. Bernardi, T. Koch, F. Franek:
"Microstructure and mechanical properties of HVOF sprayed nanocrystalline Cr3C2-25 (Ni20Cr) coating";
Journal of Thermal Spray Technology,
15
(2006),
3;
S. 372
- 381.
L. Ruppitsch, G. Peer, K. Ehrmann, T. Koch, R. Liska:
"Photopolymerization of difunctional cyclopolymerizable monomers with low shrinkage behavior";
Journal of Polymer Science Part A: Polymer Chemistry,
59
(2021),
6;
S. 519
- 531.
G. Russmüller, R. Liska, J. Stampfl, C. Heller, A. Mautner et al.:
"3D Printable Biophotopolymers for in vivo Bone Regeneration";
Materials,
8
(2015),
S. 3685
- 3700.
J. Rybnicek, R. Lach, M. Lapcikova, J. Steidl, Z. Krulis, W. Grellmann, M. Slouf:
"Increasing Recyclability of PC, ABS and PMMA: Morphology and Fracture Behavior of Binary and Ternary Blends";
Journal of Applied Polymer Science,
109
(2008),
5;
S. 3210
- 3223.
C. Sabitzer, J. Paulitsch, S. Kolozsvári, R. Rachbauer, P.H. Mayrhofer:
"Influence of bias potential and layer arrangement on structure and mechanical properties of arc evaporated Al-Cr-N coatings";
Vacuum,
106
(2014),
S. 49
- 52.
C. Sabitzer, C. Steinkellner, C.M. Koller, P. Polcik, R. Rachbauer, P.H. Mayrhofer:
"Diffusion behavior of C, Cr, and Fe in arc evaporated TiN- and CrN-based coatings and their influence on thermal stability and hardness";
Surface & Coatings Technology,
275
(2015),
275;
S. 185
- 192.
M Sajjad, B. Feichtenschlager, S Pabisch, J. Svehla, T. Koch, S. Seidler, H. Peterlik, G. Kickelbick:
"Study of the effect of the concentration, size and surface chemistry of zirconia and silica nanoparticle fillers within an epoxy resin on the bulk properties of the resulting nanocomposites";
Polymer International,
61
(2012),
2;
S. 274
- 285.
S. Sakhawat, A. Falahati, M. Domankova:
"Study of Microstructural Evolution of X4CrNiSiTi14-7 During Thermal Aging";
Praktische Metallographie - Practical Metallography,
47
(2010),
9;
S. 500
- 516.
D. Salaberger, M Jerabek, T. Koch, J. Kastner:
"Consideration of accuracy of quantitative X-ray CT analyses for short-glass-fibre-reinforced polymers";
Materials Science Forum,
825 - 826
(2015),
S. 907
- 913.
M. Schlögl, J. Keckes, C. Kirchlechner, J. Paulitsch, P.H. Mayrhofer:
"Effects of structure and interfaces on fracture toughness of CrN/AlN multilayer coatings";
Scripta Materialia,
68
(2013),
S. 917
- 920.
M. Schlögl, B. Mayer, J. Paulitsch, P.H. Mayrhofer:
"Influence of CrN and AlN layer thicknesses on structure and mechanical properties of CrN/AlN superlattices";
Thin Solid Films,
545
(2013),
S. 375
- 379.
M. Schlögl, J. Paulitsch, J. Keckes, P.H. Mayrhofer:
"Influence of AlN Layers on Mechanical Properties and Thermal Stability of Cr-Based Nitride Coatings";
Thin Solid Films,
531
(2013),
S. 113
- 118.
M. Schlögl, J. Paulitsch, P.H. Mayrhofer:
"Thermal stability of CrN/AlN superlattice coatings";
Surface & Coatings Technology,
240
(2014),
S. 250
- 254.
M. Schmidtchen, A. Rimnac, P. Warczok, E. Kozeschnik, C. Bernhard, S. Bragin, R. Kawalla, B. Linzer:
"Investigation of the influence of the chemical composition of HSLA steel grades on the microstructure homogeneity during hot rolling in continuous rolling mills using a fast layer model";
IOP Conference Series: Materials Science and Engineering,
119
(2016),
012001;
8 S.
A. Schnabl, H.P. Degischer:
"Thermomechanical fatigue of short fibre reinforced aluminium matrix piston alloy";
Materials Science and Technology,
19
(2003),
S. 1115
- 1118.
A. Schnabl, H.P. Degischer:
"Thermozyklisches Kriechen einer kurzfaserverstärkten Aluminium-Kolbenlegierung";
Zeitschrift für Metallkunde,
94
(2003),
6;
S. 743
- 748.
R. Schnitzer, R. Radis, M. Nöhrer, M. Schober, R. Hochfellner, S. Zinner, E. Povoden-Karadeniz, E. Kozeschnik, H. Leitner:
"Reverted Austenite in PH 13-8 Mo Maraging Steels";
Materials Chemistry and Physics,
122
(2010),
S. 138
- 145.
R. Schnitzer, D. Zügner, P. Haslberger, W. Ernst, E. Kozeschnik:
"Influence of alloying elements on the mechanical properties of high-strength weld metal";
Science and Technology of Welding and Joining,
Volume 22
(2017),
6;
S. 536
- 543.
C. Schoberleitner, V. Archodoulaki, T. Koch, S. Lüftl, L. Mateos, M. Vincze, M. Werderitsch, G. Kuschnig:
"Development of a sealing material and robot for automatic socket rehabilitation of grey cast iron pipes in drinking water supply systems";
Water Science & Technology: Water Supply,
4
(2013),
S. 924
- 931.
C. Schoberleitner, V. Archodoulaki, T. Koch, S. Lüftl, M. Werderitsch, G. Kuschnig:
"Developing a Sealing Material: Effect of Epoxy Modification on Specific Physical and Mechanical Properties";
Materials,
6
(2013),
12;
S. 5490
- 5501.
M. Schöbel, W. Altendorfer, H.P. Degischer, S. Vaucher, T. Buslaps, M. Di Michiel, M. Hofmann:
"Internal stresses and voids in SiC particle reinforced aluminium composites for heat sink applications";
Composites Science and Technology,
71
(2011),
5;
S. 724
- 733.
M. Schöbel, H.P. Degischer, A. Brendel, B. Harrer, M. Di Michiel:
"3D Characterization of Thermal Fatigue Damage in Monofilament Reinforced Copper for Heat Sink Applications in Fusion Reactor Systems";
Praktische Metallographie - Practical Metallography,
49
(2012),
S. 278
- 289.
M. Schöbel, H.P. Degischer, S. Vaucher, M. Hofmann, P. Cloetens:
"Reinforcement architectures and thermal fatigue in diamond particle reinforced aluminum";
Acta Materialia,
58
(2010),
S. 6421
- 6430.
M. Schöbel, S. Großeiber, J. Jonke, R. Wimpory, S. Ilie, G. Requena:
"Residual Stresses in Continuously Cast Steel Slabs";
Berg- und Hüttenmännische Monatshefte (BHM),
158
(2013),
11;
S. 475
- 476.
M. Schöbel, J. Jonke, H.P. Degischer, A. Herrmann, R. Wimpory, T. Buslaps:
"Thermal cycling stresses in W-monofilament reinforced copper";
Advanced Engineering Materials,
13
(2011),
8;
S. 742
- 746.
M. Schöbel, J. Jonke, H.P. Degischer, V. Paffenholz, R. Wimpory, M. Di Michiel:
"Thermal fatigue damage in monofilament reinforced copper for heat sink applications in divertor elements";
Journal of Nuclear Materials,
409
(2011),
3;
S. 225
- 234.
M. Schöbel, P. Pongratz, H.P. Degischer:
"Coherency loss of Al3(Sc,Zr) precipitates by deformation of an Al-Zn-Mg alloy";
Acta Materialia,
60
(2012),
10;
S. 4247
- 4254.
M. Schöbel, G. Requena, H.P. Degischer, H. Kaminski, T. Buslaps, M. Di Michiel:
"Residual stresses and void kinetics in AlSiC MMCs during thermal cycling";
Materials Science Forum,
571-572
(2008),
S. 413
- 418.
M. Schöbel, G. Requena, H.P. Degischer, H. Kaminski, T. Buslaps, M. Di Michiel:
"Thermische Ausdehnung, innere Spannungen und Porenverteilung in AlSiCp Metallmatrixverbundwerkstoffe (Thermal expansion, internal stresses and porosity distribution in AlSiCp MMC)";
Materialwissenschaft und Werkstofftechnik,
38
(2007),
11;
S. 927
- 933.
D. Schopf, H. Euchner, H. Trebin:
"Effective potentials for simulations of the thermal conductivity of type-I semiconductor clathrate systems";
Physical Review B,
89
(2014),
214306;
S. 21
- 21430611.
M. Schuster, R. Inführ, C. Turecek, J. Stampfl, A. Varga, R. Liska:
"Photopolymers for Rapid Prototyping of Soluble Mold Materials and Molding of Cellular Biomaterials";
Monatshefte für Chemie,
137
(2006),
S. 843
- 853.
M. Schuster, C. Turecek, B. Kaiser, J. Stampfl, R. Liska, F. Varga:
"Evaluation of Biocompatible Photopolymers I: Photoreactivity and Mechanical Properties of Reactive Diluents";
Journal of Macromolecular Science Part A - Pure and Applied Chemistry,
44
(2007),
5;
S. 547
- 557.
M. Schuster, C. Turecek, A. Mateos, J. Stampfl, R. Liska, F. Varga:
"Evaluation of Biocompatible Photopolymers II: Further Reactive Diluents";
Monatshefte für Chemie,
138
(2007),
4;
S. 261
- 268.
M. Schuster, C. Turecek, F. Varga, H. Lichtenegger, J. Stampfl, R. Liska:
"3D-shaping of biodegradable photopolymers for hard tissue replacement";
Applied Surface Science,
254
(2007),
S. 1131
- 1134.
M. Schuster, C. Turecek, G. Weigel, R. Saf, J. Stampfl, F. Varga, R. Liska:
"Gelatin-Based Photopolymers for Bone Replacement Materials";
Journal of Polymer Science Part A: Polymer Chemistry,
47
(2009),
S. 7078
- 7089.
R. Schuster, G Habler, E. Schafler, R. Abart:
"Intragranular deformation mechanisms in calcite deformed by high-pressure torsion at room temperature";
Mineralogy and Petrology,
114
(2020),
S. 105
- 118.
S. Seichter, V. Archodoulaki, T. Koch, W. Fidi, A. Holzner, S. Robin:
"Survey of the crack growth approach for the fatigue life estimation of application-relevant rubbers";
AIP Conference Proceedings - American Institute of Physics,
1779
(2016),
1;
5 S.
S. Seichter, V. Archodoulaki, T. Koch, A. Holzner, A. Wondracek:
"Ermüdungsverhalten technischer Gummimischungen - Der Einfluss verschiedener Parameter am Beispiel eines anwendungsrelevanten Belastungsfalls";
GAK - Gummi Fasern Kunststoffe,
70
(2017),
4;
S. 234
- 239.
S. Seichter, V. Archodoulaki, T. Koch, A. Holzner, A. Wondracek:
"Investigation of different influences on the fatigue behaviour of industrial rubbers";
Polymer Testing,
59
(2017),
S. 99
- 106.
W. Seidl, M. Bartosik, S. Kolozsvári, H. Bolvardi, P.H. Mayrhofer:
"Improved mechanical properties, thermal stabilities, and oxidation resistance of arc evaporated Ti-Al-N coatings through alloying with Ta";
Surface & Coatings Technology,
344
(2018),
S. 244
- 249.
W. Seidl, M. Bartosik, S. Kolozsvári, H. Bolvardi, P.H. Mayrhofer:
"Influence of coating thickness and substrate on stresses and mechanical properties of (Ti,Al,Ta)N/(Al,Cr)N multilayers";
Surface & Coatings Technology,
347
(2018),
2018;
S. 92
- 98.
W. Seidl, M. Bartosik, S. Kolozsvári, H. Bolvardi, P.H. Mayrhofer:
"Influence of Ta on the fracture toughness of arc evaporated Ti-Al-N";
Vacuum,
150
(2018),
S. 24
- 28.
W. Seidl, M. Bartosik, S. Kolozsvári, H. Bolvardi, P.H. Mayrhofer:
"Mechanical properties and oxidation resistance of Al-Cr-N/Ti-Al-Ta-N multilayer coatings";
Surface & Coatings Technology,
347
(2018),
S. 427
- 433.
K. Seidler, K. Ehrmann, P. Steinbauer, A. Rohatschek, O.G. Andriotis, C. Dworak, T. Koch, H. Bergmeister, C. Grasl, H. Schima, P.J. Thurner, R. Liska, S. Baudis:
"A structural reconsideration: Linear aliphatic or alicyclic hard segments for biodegradable thermoplastic polyurethanes?";
Journal of Polymer Science Part A: Polymer Chemistry,
56
(2018),
19;
S. 2214
- 2224.
K. Seidler, M. Griesser, M. Kury, H. Reghunathan, P. Dorfinger, T. Koch, A. Svirkova, M. Marchetti-Deschmann, J. Stampfl, N. Moszner, C. Gorsche, R. Liska:
"Vinyl Sulfonate Esters: Efficient Chain Transfer Agents for the 3D Printing of Tough Photopolymers without Retardation";
Angewandte Chemie - International Edition,
57
(2018),
29;
S. 9165
- 9169.
S. Seidler, T. Koch:
"Determination of Local Mechanical Properties of α-and β-PP by means of Microhardness Measurements";
Journal of Macromolecular Science,
Part B - Physics
(2002),
Vol. B41, Nos. 4-6;
S. 851
- 861.
S. Seidler, T. Koch:
"Morphology - Property Correlations of PP materials by Means of Microhardness";
Macromolecular Symposia,
217
(2004),
S. 329
- 342.
M. Seier, S. Stanic, T. Koch, V. Archodoulaki:
"Effect of Different Compatibilization Systems on the Rheological, Mechanical and Morphological Properties of Polypropylene/Polystyrene Blends";
Polymers,
12
(2020),
2335;
S. 1
- 20.
M. Seitzberger, F. G. Rammerstorfer, H.P. Degischer, R. Gradinger:
"Crushing of Axially Compressed Steel Tubes Filled with Aluminium Foam";
Acta Mechanica,
125
(1997),
1-4;
S. 93
- 105.
M. Seitzberger, F. G. Rammerstorfer, R. Gradinger, H.P. Degischer, M. Blaimschein, C. Walch:
"Experimental Studies on the Quasi-Static Axial Crushing of Steel Columns Filled with Aluminium Foam";
International Journal of Solids and Structures,
37
(2000),
30;
S. 4125
- 4147.
D. Shakhvorostov, H. Pinto, A. Pyzalla, S. Enders, K. Pöhlmann, M. Scherge:
"Mechanical properties of tribologically modified nano-layers";
TriboTest,
11
(2004),
S. 95
- 102.
D. Shakhvorostov, H. Pinto, A. Pyzalla, S. Enders, K. Pöhlmann, M. Scherge:
"Mechanical properties of tribologically modified nano-layers";
TriboTest,
Vol. 11
(2006),
Issue 2;
S. 95
- 102.
D. Shakhvorostov, H. Pinto, A. Pyzalla, S. Enders, K. Pöhlmann, M. Scherge:
"Structure, hardness and stress state analysis on metal-metal tribocontacts with oil lubrication";
Materialwissenschaft und Werkstofftechnik,
35
(2004),
10/11;
S. 614
- 619.
Y.V. Shan, M. Soliman, H. Palkowski, E. Kozeschnik:
"Modeling of Bake Hardening Kinetics and Carbon Redistribution in Dual-Phase Steels";
Steel Research International,
92
(2021),
1, 2000307.
Y.V. Shan, J. Svoboda, F.D. Fischer, E. Kozeschnik:
"Determination of Substitutional-Interstitial Interaction from Chemical";
Advanced Materials Research,
Vol 922
(2014),
922;
S. 645
- 650.
L. Shi, H. Carstensen, K. Hölzl, M. Lunzer, L. Hao, J. Hilborn, A. Ovsianikov, D. Ossipov:
"Dynamic Coordination Chemistry Enables Free Directional Printing of Biopolymer Hydrogel";
Chemistry of Materials,
29
(2017),
14;
S. 5816
- 5823.
J. Shim, E. Kozeschnik, W. Jung, S. Lee, D. Kim, J. Suh, Y. Lee, Y. Cho:
"Numerical simulation of long-term precipitate evolution in austenitic heat-resistant steels";
CALPHAD - Computer Coupling of Phase Diagrams and Thermochemistry,
34
(2010),
S. 105
- 112.
J. Shim, E. Povoden-Karadeniz, E. Kozeschnik, B. Wirth:
"Modeling precipitation thermodynamics and kinetics in type 316 austenitic stainless steels with varying composition as an initial step toward predicting phase stability during irradiation";
Journal of Nuclear Materials,
462
(2015),
S. 250
- 257.
K. Silva, R. Rezende, F. Pereira, P. Gruber, M. Stuart, A. Ovsianikov, K. Brakke, V. Kasyanov, J. da Silva, J. Granjeiro, L. Baptista, V. Mironov:
"Delivery of Human Adipose Stem Cells Spheroids into Lockyballs";
PLoS ONE,
11
(2016).
G. Siroky, E. Kraker, D. Kieslinger, E. Kozeschnik, W. Ecker:
"Micromechanics-based damage model for liquid-assisted healing";
International Journal of Damage Mechanics,
30
(2021),
1;
S. 123
- 144.
G. Siroky, E. Kraker, D. Kieslinger, L. Romaner, E. Kozeschnik, W. Ecker:
"Modelling of Void Collapse with Molecular Dynamics in Pure Sn";
Proceedings,
56
(2020),
1, 29;
S. 1
- 3.
G. Siroky, E. Kraker, J. Magnien, D. Melinc, D. Kieslinger, E. Kozeschnik, W. Ecker:
"Effect of solder joint size and composition on liquid-assisted healing";
Microelectronics Reliability,
119
(2021),
114066;
S. 1
- 10.
G. Siroky, E. Kraker, J. Rosc, D. Kieslinger, R. Brunner, S. van der Zwaag, E. Kozeschnik, W. Ecker:
"Analysis of Sn-Bi Solders: X-ray Micro Computed Tomography Imaging and Microstructure Characterization in Relation to Properties and Liquid Phase Healing Potential";
Materials,
14
(2021),
1, 153;
S. 1
- 22.
G. Siroky, J. Magnien, D. Melinc, E. Kozeschnik, D. Kieslinger, E. Kraker, W. Ecker:
"Lap shear test for solder materials: Local stress states and their effect on deformation and damage";
Microelectronics Reliability,
109
(2020),
113655;
S. 1
- 11.
W. Smetana, B. Balluch, G. Stangl, S. Lüftl, S. Seidler:
"Processing procedures for the realization of fine structured channel arrays and bridging elements by LTCC-Technology";
Microelectronics Reliability,
49
(2009),
6;
S. 592
- 599.
M. Soliman, Y.V. Shan, F. Mendez Martin, E. Kozeschnik, H. Palkowski:
"Strain aging characterization and physical modelling of over-aging in dual phase steel";
Materials Science and Engineering A,
788
(2020),
139595;
S. 1
- 13.
B. Sonderegger, I. Holzer, E. Kozeschnik:
"Calculation of energies of coherent interfaces and application to the nucleation, growth and coarsening of precipitates";
Materials Science Forum,
638-642
(2010),
S. 2730
- 2735.
B. Sonderegger, I. Holzer, E. Kozeschnik, C. Sommitsch:
"Particle distance distributions and their effect on precipitation strengthening";
Computer Methods in Materials Science,
11
(2011),
1;
S. 148
- 153.
B. Sonderegger, E. Kozeschnik:
"Generalized nearest-neighbor broken-bond analysis of randomly oriented interfaces in multi-component fcc and bcc structures";
Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science,
40
(2009),
3;
S. 499
- 510.
B. Sonderegger, E. Kozeschnik:
"Interfacial energy of diffuse phase boundaries in the generalized broken-bond approach";
Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science,
41
(2010),
S. 3262
- 3269.
B. Sonderegger, E. Kozeschnik:
"Particle strengthening in fcc crystals with prolate and oblate precipitates";
Scripta Materialia,
66
(2012),
S. 52
- 55.
B. Sonderegger, E. Kozeschnik:
"Size dependence of the interfacial energy in the generalized nearest-neighbor broken-bond approach";
Scripta Materialia,
60
(2009),
6;
S. 635
- 638.
B. Sonderegger, E. Kozeschnik, H. Leitner, H. Clemens, J. Svoboda, F. Fischer:
"Computational analysis of the precipitation kinetics in a complex tool steel";
International Journal of Materials Research,
99
(2008),
4;
S. 410
- 415.
B. Sonderegger, E. Kozeschnik, H. Leitner, H. Clemens, J. Svoboda, F. Fischer, P. Staron:
"Kinetics of Precipitation in a Complex Hot-Work Tool Steel";
Steel Research International,
81
(2010),
S. 64
- 73.
M. Sperr, Z. Zhang, Y.P. Ivanov, P.H. Mayrhofer, M. Bartosik:
"Correlating elemental distribution with mechanical properties of TiN/SiNx nanocomposite coatings";
Scripta Materialia,
170
(2019),
S. 20
- 23.
F. Stadlbauer, T. Koch, V. Archodoulaki, F. Planitzer, W. Fidi, A. Holzner:
"Influence of Experimental Parameters on Fatigue Crack Growth and Heat Build-Up in Rubber";
Materials,
6
(2013),
12;
S. 5502
- 5516.
F. Stadlbauer, T. Koch, F. Planitzer, W. Fidi, V. Archodoulaki:
"Einfluss des Rußfüllgrades von Elastomeren auf Aspekte der Ermüdung in Zug-Druck-Belastung";
Kgk-Kautschuk Gummi Kunststoffe,
66
(2013),
7-8;
S. 37
- 42.
F. Stadlbauer, T. Koch, F. Planitzer, W. Fidi, V. Archodoulaki:
"Setup for evaluation of fatigue crack growth in rubber: Pure shear sample geometries tested in tension-compression mode";
Polymer Testing,
32
(2013),
6;
S. 1045
- 1051.
J. Stampfl, S. Baudis, C. Heller, R. Liska, A. Neumeister, R. Kling, A. Ostendorf, M. Spitzbart:
"Photopolymers with tunable mechanical properties processed by laser based high-resolution stereolithography";
Journal of Micromechanics and Microengineering,
18
(2008),
125014.
J. Stampfl, H. Fouad, S. Seidler, R. Liska, F. Schwager, A. Woesz, P. Fratzl:
"Fabrication and moulding of cellular materials by rapid prototyping";
International Journal of Materials and Product Technology,
21
(2004),
4;
S. 285
- 296.
J. Stampfl, R. Liska:
"New materials for rapid prototyping applications";
Macromolecular Chemistry and Physics,
206
(2005),
S. 1253
- 1256.
J. Stampfl, H. Liu, S. Nam, K. Sakamoto, H. Tsuru, S. Kang, A. Cooper, A. Nickel, F. Prinz:
"Rapid prototyping and manufacturing by gelcasting of metallic and ceramic slurries";
Materials Science and Engineering A,
334
(2002),
S. 187
- 192.
J. Stampfl, M.H. Luxner, H. E. Pettermann:
"Zellulare Werkstoffe mit frei wählbarer Zellgeometrie - Herstellung, Modellierung der mechanischen Eigenschaften und Anwendungen";
Lignovisionen,
14
(2006),
S. 55
- 60.
J. Stampfl, A. Wöß, O. Kolednik, P. Fratzl:
"Object reconstruction and object construction: Applications in materials science";
Recent Research Development in Applied Physics,
5
(2002),
S. 89
- 106.
J. Stampfl, A. Wöß, S. Seidler, H. Fouad, A. Pisaipan, F. Schwager, R. Liska:
"Water Soluble, Photocurable Resins for Rapid Prototyping Applications";
Macromolecular Symposia,
217
(2004),
1;
S. 99
- 107.
S. Stanic, G. Gottlieb, T. Koch, L. Göpperl, K. Schmid, S. Knaus, V. Archodoulaki:
"Influence of Different Types of Peroxides on the Long-Chain Branching of PP via Reactive Extrusion";
Polymers,
12
(2020),
886;
S. 1
- 18.
S. Stanic, T. Koch, V. Archodoulaki:
"Improving Rheological and Mechanical Properties of Various Virgin and Recycled Polypropylenes by Blending with Long-Chain Branched Polypropylene";
Polymers,
13
(2021),
7;
S. 1
- 19.
S. Stanic, T. Koch, K. Schmid, S. Knaus, V. Archodoulaki:
"Upcycling of polypropylene with various concentrations of peroxydicarbonate and dilauroyl peroxide and two processing steps";
Journal of Applied Polymer Science,
138
(2021),
28: e50659;
S. 1
- 20.
G. Stechauner, E. Kozeschnik:
"Assessment of substitutional self-diffusion along short-circuit paths in Al, Fe and Ni";
CALPHAD - Computer Coupling of Phase Diagrams and Thermochemistry,
47
(2014),
S. 92
- 99.
G. Stechauner, E. Kozeschnik:
"Self-Diffusion in Grain Boundaries and Dislocation Pipes in Al, Fe, and Ni and Application to AlN Precipitation in Steel";
Journal of Materials Engineering and Performance,
23
(2014),
5;
S. 1576
- 1579.
G. Stechauner, E. Kozeschnik:
"Thermo-kinetic modeling of Cu precipitation in α-Fe";
Acta Materialia,
100
(2015),
S. 135
- 146.
G. Stechauner, S. Primig, E. Kozeschnik:
"Early Stages of Cu Precipitation in 15-5 PH Maraging Steel Revisited - Part II: Thermokinetic Simulation";
Steel Research International,
88
(2017),
1, 1600085.
J. Steindl, T. Koch, N. Moszner, C. Gorsche:
"Silane-Acrylate Chemistry for Regulating Network Formation in Radical Photopolymerization";
Macromolecules,
50
(2017),
19;
S. 7448
- 7457.
R. Steinlechner, R. Calderon, T. Koch, P. Linhardt, W.D. Schubert:
"A study on WC-Ni cemented carbides: Constitution, alloy compositions and properties, including corrosion behaviour";
International Journal of Refractory Metals & Hard Materials,
103
(2022),
105750.
B. Steyrer:
"PLA/PHA Blend for 3D printing";
Bioplastics Magazine,
9
(2014),
S. 22.
B. Steyrer, B. Busetti, G. Harakaly, R. Liska, J. Stampfl:
"Hot Lithography vs. room temperature DLP 3D-printing of a dimethacrylate";
Additive Manufacturing,
21
(2018),
S. 209
- 214.
B. Steyrer, P. Neubauer, R. Liska, J. Stampfl:
"Visible Light Photoinitiator for 3D-Printing of Tough Methacrylate Resins";
Materials,
10
(2017),
12;
11 S.
J. Stögerer, S. Baumgartner, A. Hochwallner, J. Stampfl:
"Bio-inspired toughening of composites in 3D-printing";
Materials,
13
(2020),
21, 4714.
M. Stopher, P. Lang, E. Kozeschnik, P. Rivera-Diaz-Del-Castillo:
"Modelling hydrogen migration and trapping in steels";
Materials & Design,
106
(2016),
S. 205
- 215.
H. Straube, J. Kullmann:
"Untersuchungen für eine verbesserte Wärmebehandlung von Duplex-Stählen";
Berg- und Hüttenmännische Monatshefte (BHM),
148 Jg.
(2003),
5;
S. 163
- 171.
M. Stüber, H. Riedl, T. Wojcik, S. Ulrich, H. Leiste, P.H. Mayrhofer:
"Microstructure of Al-containing magnetron sputtered TiB2 thin films";
Thin Solid Films,
688
(2019),
137361;
S. 1
- 12.
R. Supplit, T. Koch, U. Schubert:
"Evaluation of the anti-corrosive effect of acid pickling and sol-gel coating on magnesium AZ31 alloy";
Corrosion Science,
49
(2007),
S. 3015
- 3023.
M. Susec, S. Ligon, J. Stampfl, R. Liska, P. Krajnc:
"Hierarchically Porous Materials from Layer-by-Layer Photopolymerization of High Internal Phase Emulsions";
Macromolecular Rapid Communications,
34
(2013),
S. 938
- 943.
H. Svajdlenková, A. Kleinova, O. Sausa, J. Rusnak, A.D. Tran, T. Koch, P. Knaack:
"Microstructural study of epoxy-based thermosets prepared by "classical" and cationic frontal polymerization";
RSC Advances,
10
(2020),
10;
S. 41098
- 41109.
H. Svajdlenková, O. Sausa, I. Matko, T. Koch, C. Gorsche:
"Investigating the Free‐Volume Characteristics of Regulated Dimethacrylate Networks Below and Above Glass Transition Temperature";
Macromolecular Chemistry and Physics,
07
(2018),
S. 1
- 6.
H. Svajdlenková, O. Sausa, J. Steindl, T. Koch, C. Gorsche:
"Microstructural PALS study of regulated dimethacrylates: Thiol- versus β-allyl sulfone-based networks";
Journal of Polymer Science Part B: Polymer Physics,
54
(2016),
23;
S. 2476
- 2484.
J. Svoboda, F.D. Fischer, H. Riedel, E. Kozeschnik:
"Precipitate growth in multi-component systems with stress relaxation by diffusion and creep";
International Journal of Plasticity,
82
(2016),
S. 112
- 126.
J. Svoboda, E. Gamsjaeger, F.D. Fischer, Y. Liu, E. Kozeschnik:
"Diffusion processes in a migrating interface: The thick-interface model";
Acta Materialia,
59
(2011),
12;
S. 4775
- 4786.
J. Svoboda, Y.V. Shan, F.D. Fischer:
"A new self-consistent model for thermodynamics of binary solutions";
Scripta Materialia,
108
(2015),
S. 27
- 30.
J. Svoboda, Y.V. Shan, E. Kozeschnik, F.D. Fischer:
"A thermokinetic model for Mg-Si couple formation in Al-Mg-Si alloys";
Modelling and Simulation in Materials Science and Engineering,
24
(2016),
S. 1
- 16.
J. Svoboda, Y.V. Shan, E. Kozeschnik, F.D. Fischer:
"Couples and pairs formation-thermodynamic and kinetic modelling applied to Al-Mg-Si";
Modelling and Simulation in Materials Science and Engineering,
25
(2017),
6;
S. 1
- 15.
J. Svoboda, Y.V. Shan, E. Kozeschnik, F.D. Fischer:
"Determination of depths of multiple traps for interstitials and their influence on diffusion kinetics";
Modelling and Simulation in Materials Science and Engineering,
22
(2014),
6;
S. 1
- 16.
J. Svoboda, Y.V. Shan, E. Kozeschnik, F.D. Fischer:
"Determination of depths of traps for interstitials from thermodynamic data: a new view on carbon trapping and diffusion";
Modelling and Simulation in Materials Science and Engineering,
21
(2013),
6;
S. 065012
- 065026.
J. Svoboda, Y.V. Shan, E. Kozeschnik, F.D. Fischer:
"Influence of misfit stress relaxation by power-law creep and plasticity on kinetics of coarsening of precipitates";
Scripta Materialia,
168
(2019),
S. 81
- 85.
J. Svoboda, Y.V. Shan, G. Zickler, E. Kozeschnik, F.D. Fischer:
"Local approach for coarsening of precipitates";
Scripta Materialia,
178
(2020),
S. 232
- 235.
J. Svoboda, G. Zickler, E. Kozeschnik, F.D. Fischer:
"Kinetics of interstitial segregation in Cottrell atmospheres and grain boundaries";
Philosophical Magazine Letters,
Vol 95, No. 9
(2015),
9;
S. 458
- 465.
L. Székely, G. Sáfrán, V. Kis, Z. Horváth, P.H. Mayrhofer, M. Moser, G. Radnóczi, F. Misják, P. Barna:
"Crossover of texture and morphology in (Ti1-xAlx)1-yYyN alloy films and the pathway of structure evolution";
Surface & Coatings Technology,
257
(2014),
S. 3
- 14.
P. Tesavibul, R. Felzmann, S. Gruber, R. Liska, I. Thompson, A. Boccaccini, J. Stampfl:
"Processing of 45S5 Bioglass by lithography-based additive manufacturing";
Materials Letters,
74
(2012),
S. 81
- 84.
S. Theis, I. Iturmendi, C. Gorsche, M. Orthofer, M. Lunzer, S. Baudis, A. Ovsianikov, R. Liska, U. Monkowius, I. Teasdale:
"Durch sichtbares Licht und Nahinfrarotstrahlung abbaubare supramolekulare Metallo-Gele";
Angewandte Chemie,
129
(2017),
50;
S. 16071
- 16075.
S. Theis, I. Iturmendi, C. Gorsche, M. Orthofer, M. Lunzer, S. Baudis, A. Ovsianikov, R. Liska, U. Monkowius, I. Teasdale:
"Metallo-Supramolecular Photocleavable Gels Sensitive to Visible and Near Infrared Irradiation";
Angewandte Chemie International Edition,
56
(2017),
50;
S. 15857
- 15860.
T. Tiefenböck, L. Hirtler, M Winnisch, H. Binder, T. Koch, M. Komjati, M. Hofbauer, R. Ostermann:
"The buried knot technique for all inside graft link preparation leads to superior biomechanical graft link stability";
Scientific Reports,
9
(2019),
1488;
S. 1
- 8.
T. Tiefenböck, L. Hirtler, M Winnisch, J. Jöstl, T. Koch, M. Komjati, M. Hofbauer, R. Ostermann:
"A bigger suture diameter for anterior cruciate ligament allinside graft link preparation leads to better graft stability: An anatomical specimen study";
Knee,
25
(2018),
3;
S. 427
- 433.
T. Tiefenböck, S Payr, O Bajenov, T Dangl, T. Koch, M. Komjati, K Sarahrudi:
"Different storage times and their effect on the bending load to failure testing of murine bone tissue";
Scientific Reports,
10
(2020),
8 S.
T. Tiefenböck, S Payr, O Bajenov, T. Koch, M. Komjati, K Sarahrudi:
"Effect of two (short-term) storage methods on load to failure testing of murine bone tissue";
Scientific Reports,
9
(2019),
7 S.
A. Timoshenkov, P. Warczok, M. Albu, J. Klarner, E. Kozeschnik, R. Bureau, C. Sommitsch:
"Modelling the dynamic recrystallization in C-Mn micro-alloyed steel during thermo-mechanical treatment using cellular automata";
Computational Materials Science,
94
(2014),
S. 85
- 94.
A. Timoshenkov, P. Warczok, M. Albu, J. Klarner, E. Kozeschnik, G. Gruber, C. Sommitsch:
"Influence of deformation on phase transformation and precipitation of steels for oil country tubular goods";
Steel Research International,
85
(2014),
6;
S. 954
- 967.
J. Todt, C. Krywka, Z. Zhang, P.H. Mayrhofer, J. Keckes, M. Bartosik:
"Indentation response of a superlattice thin film revealed by in-situ scanning X-ray nanodiffraction";
Acta Materialia,
195
(2020),
S. 425
- 432.
D. Tolnai, H.P. Degischer, J. Lendvai:
"Characterization of phasesin an Al casting alloy by synchrotron tomography";
Physica Status Solidi A,
206
(2009),
8;
S. 1850
- 1854.
D. Tolnai, G. Requena, P. Cloetens, J. Lendvai, H.P. Degischer:
"Effect of solution heat treatment on the internal architecture and compressive strength of an AlMg4.7Si8 alloy";
Materials Science and Engineering A,
585
(2013),
-;
S. 480
- 487.
D. Tolnai, G. Requena, P. Cloetens, J. Lendvai, H.P. Degischer:
"Sub-micrometre holotomographic characterisation of the effects of solution heat treatment on an AlMg7.3Si3.5 alloy";
Materials Science and Engineering A,
550
(2012),
S. 214
- 221.
D. Tolnai, G. Szakacs, G. Requena, A. Stark, N. Schell, K. Kainer, N. Hort:
"Study of the solidification of AS alloys combining in situ synchrotron diffraction and differential scanning calorimetry";
Materials Science Forum,
765
(2013),
-;
S. 286
- 290.
D. Tolnai, P. Townsend, G. Requena, L. Salvo, J. Lendvai, H.P. Degischer:
"In situ synchrotron tomographic investigation of the solidification of an AlMg4.7Si8 alloy";
Acta Materialia,
60
(2012),
S. 2568
- 2577.
J. Torgersen, A. Ovsianikov, V. Mironov, N.U Pucher, X.H. Qin, Z. Li, K. Cicha, T. Machacek, V. Jantsch-Plunger, R. Liska, J. Stampfl:
"Photo-sensitive hydrogels for threedimensional laser microfabrication in the presence of whole organisms";
Journal of Biomedical Optics,
17
(2012),
10;
S. 1
- 10.
J. Torgersen, X.H. Qin, Z. Li, A. Ovsianikov, R. Liska, J. Stampfl:
"Hydrogels for Two-Photon Polymerization: A Toolbox for Mimicking the Extracellular Matrix";
Advanced Functional Materials,
10
(2013),
6.
A.D. Tran, T. Koch, P. Knaack, R. Liska:
"Radical induced cationic frontal polymerization for preparation of epoxy composites";
Composites Part A: Applied Science and Manufacturing,
132
(2020),
May;
S. 1
- 8.
A.D. Tran, T. Koch, R. Liska, P. Knaack:
"Radical-induced cationic frontal polymerisation for prepreg technology";
Monatshefte für Chemie,
152
(2021),
S. 151
- 165.
M. Tromayer, A. Dobos, P. Gruber, A. Ajami, R. Dedic, A. Ovsianikov, R. Liska:
"A biocompatible diazosulfonate initiator for direct encapsulation of human stem cells via two-photon polymerization";
Polymer Chemistry,
9
(2018),
22;
S. 3108
- 3117.
M. Tromayer, P. Gruber, M. Markovic, A. Rosspeintner, E. Vauthey, H. Redl, A. Ovsianikov, R. Liska:
"A biocompatible macromolecular two-photon initiator based on hyaluronan";
Polymer Chemistry,
8
(2017),
2;
S. 451
- 460.
M. Tromayer, P. Gruber, A. Rosspeintner, A. Ajami, W. Husinsky, F. Plasser, L. Gonzalez, E. Vauthey, A. Ovsianikov, R. Liska:
"Wavelength-optimized Two-Photon Polymerization Using Initiators Based on Multipolar Aminostyryl-1,3,5-triazines";
Scientific Reports,
8
(2018),
S. 1727301
- 1727311.
J. Troufflard, G. Requena, S. Thuillier, E. Maire:
"Ductile damage in tension and bending for DP980 steel sheets";
Key Engineering Materials,
554-557
(2013),
-;
S. 110
- 117.
C. Turecek, M. Schuster, F. Varga, R. Liska, B. Kaiser, J. Stampfl, K. Klaushofer:
"Evaluation and influence of photopolymers, capable for rapid prototyping on proliferation and morphologiy of osteoblasts";
Calcified Tissue International,
78
(2006),
S. 71 P127.
M. Turnsek, P. Krajnc, R. Liska, T. Koch:
"Macroporous alumina with cellular interconnected morphology from emulsion templated polymer composite precursors";
Journal of the European Ceramic Society,
36
(2016),
S. 1045
- 1051.
L. Tytgat, A. Dobos, M. Markovic, L. Van Damme, J. Van Hoorick, F. Bray, H Thienpont, H. Ottevaere, P. Dubruel, A. Ovsianikov, S. van Vlierberghe:
"High-Resolution 3D Bioprinting of Photo-Cross-linkable Recombinant Collagen to Serve Tissue Engineering Applications";
Biomacromolecules,
21
(2020),
10;
S. 3997
- 4007.
L. Tytgat, M. Markovic, T.H Qazi, M. Vagenende, F. Bray, J.C. Martins, C. Rolando, H Thienpont, H. Ottevaere, A. Ovsianikov, P. Dubruel, S. van Vlierberghe:
"Photo-crosslinkable recombinant collagen mimics for tissue engineering applications";
Journal of Materials Chemistry B,
7
(2019),
S. 3100
- 3108.
J. Van Hoorick, A. Dobos, M. Markovic, T. Gheysens, L. Van Damme, P. Gruber, L. Tytgat, J Van Erps, H Thienpont, P. Dubruel, A. Ovsianikov, S. van Vlierberghe:
"Thiol-norbornene gelatin hydrogels: influence of thiolated crosslinker on network properties and high definition 3D printing";
Biofabrication,
13
(2021),
015017.
J. Van Hoorick, P. Gruber, M. Markovic, M. Rollot, G. Graulus, M. Vagenende, M. Tromayer, J Van Erps, H Thienpont, J. Martins, S. Baudis, A. Ovsianikov, P. Dubruel, S. Van Vlierberghe:
"Highly Reactive Thiol‐Norbornene Photo‐Click Hydrogels: Toward Improved Processability";
Macromolecular Rapid Communications,
39
(2018),
14, paper 1800181;
S. #.
J. Van Hoorick, P. Gruber, M. Markovic, M. Tromayer, J. Van Erps, H. Thienpont, R. Liska, A. Ovsianikov, P. Dubruel, S. Van Vlierberghe:
"Cross-Linkable Gelatins with Superior Mechanical Properties Through Carboxylic Acid Modification: Increasing the Two-Photon Polymerization Potential Quick View Other Sources";
Biomacromolecules,
18
(2017),
10;
S. 3260
- 3272.
J. Van Hoorick, L. Tytgat, A. Dobos, H. Ottevaere, J Van Erps, H Thienpont, A. Ovsianikov, P. Dubruel, S. van Vlierberghe:
"(Photo-)crosslinkable Gelatin Derivatives for Biofabrication Applications";
Acta Biomaterialia,
97
(2019),
S. 46
- 73.
K Varga, M. F. Noisternig, U. J. Griesser, L. Aljaz, T. Koch:
"Thermal and sorption studies of flame-resistant fibers";
Lenzinger Berichte,
89
(2011),
S. 50
- 59.
B. Viernstein, E. Kozeschnik:
"Integrated Physical-Constitutive Computational Framework for Plastic Deformation Modeling";
Metals,
10
(2020),
7, paper 869;
14 S.
A. Vieweg, E. Povoden-Karadeniz, G. Ressel, P. Prevedel, T. Wojcik, F. Mendez-Martin, A. Stark, J. Keckes, E. Kozeschnik:
"Phase evolution and carbon redistribution during continuous tempering of martensite studied with high resolution techniques";
Materials & Design,
136
(2017),
S. 214
- 222.
M. Vogric, E. Povoden-Karadeniz:
"A multiscale mean field model for elastic properties of hypereutectoid pearlitic steels with different microstructures";
International Journal of Materials Research,
112
(2021),
5;
S. 348
- 358.
Y Voronko, B. Chernev, G Eder:
"Spectroscopic investigations on thin adhesive layers in multi-material laminates";
Applied Spectroscopy,
68
(2014),
5;
S. 584
- 592.
Y Voronko, G Eder, M Knausz, G Oreski, T. Koch, K Berger:
"Correlation of the loss in photovoltaic module performance with the ageing behaviour of the backsheets used";
Progress in Photovoltaics,
23
(2015),
11;
S. 1501
- 1515.
M. Vratnica, Z. Cvijovic, H.P. Degischer, G. Requena, G. Rumplmair, M. Rakin:
"Crack Growth Resistance of Overaged Al-Zn-Mg-Cu Alloys";
Materials Science Forum,
494
(2005),
S. 217
- 222.
A. Wagner, D. Holec, P.H. Mayrhofer, M. Bartosik:
"Enhanced fracture toughness in ceramic superlattice thin films: On the role of coherency stresses and misfit dislocations";
Materials & Design,
202
(2021),
109517.
J.H. Waite, H. Lichtenegger, G. D. Stucky, P. Hansma:
"Exploring Molecular and Mechanical Gradients in Structural Bioscaffolds";
Biochemistry (eingeladen),
43
(2004),
24;
S. 7653
- 7662.
J. Wang, S. Stanic, A. Altun, K. Dietliker, M. Schwentenwein, L. Jin, J. Stampfl, S. Baudis, R. Liska, H. Grützmacher:
"A highly efficient waterborne photoinitiator for visible-light-induced three-dimensional printing of hydrogels";
Chemical Communications,
54
(2018),
S. 920
- 923.
L. Wang, A. Pyzalla, W. Stadlbauer, E. Werner:
"Microstructure features on rolling surfaces of railway rails subjected to heavy loading";
Materials Science and Engineering A,
359
(2003),
S. 31
- 43.
F. Warchomicka, C. Poletti, M. Stockinger:
"Study of the hot deformation behaviour in Ti-5Al-5Mo-5V-3Cr-1Zr";
Materials Science and Engineering A,
528
(2011),
28;
S. 8277
- 8285.
F. Warchomicka, M. Stockinger, H.P. Degischer:
"Quantitative analysis of the microstructure of near β titanium alloy during compression tests";
Journal of Materials Processing Technology,
177
(2006),
S. 473
- 477.
P. Warczok, D. Reith, M. Schober, H. Leitner, R. Podloucky, E. Kozeschnik:
"Investigation of Cu precipitation in bcc-Fe - Comparison of numerical analysis with experiment";
International Journal of Materials Research,
102
(2011),
6;
S. 709
- 716.
P. Warczok, J. Zenisek, E. Kozeschnik:
"Atomistic and continuums modeling of cluster migration and coagulation in precipitation reactions";
Computational Materials Science,
60
(2012),
S. 59
- 65.
W.W. Wei, P. Retzl, E. Kozeschnik, E. Povoden-Karadeniz:
"A semi-physical α-β model on bainite transformation kinetics and carbon partitioning";
Acta Materialia,
207
(2021),
116701.
G. Weisgrab, O. Guillaume, Z. Guo, P. Heimel, P. Slezak, A. Poot, D. Grijpma, A. Ovsianikov:
"3D Printing of large-scale and highly porous biodegradable tissue engineering scaffolds from poly(trimethylene-carbonate) using two-photon-polymerization";
Biofabrication,
12
(2020),
4;
S. 045036.
G. Weisgrab, A. Ovsianikov, P Costa:
"Functional 3D Printing for Microfluidic Chips";
Advanced Materials Technologies,
4
(2019),
1900275.
M. Weiss, T. Glechner, V. Weiss, H. Riedl, A. Limbeck:
"Quantitative Depth Profiling Using Online-Laser Ablation of Solid Samples in Liquid (LASIL) to Investigate the Oxidation Behavior of Transition Metal Borides";
Molecules,
27
(2022),
3221;
S. 1
- 12.
M. Weiss, H. Riedl, V. Moraes, P.H. Mayrhofer, A. Limbeck:
"Laser based analysis of transition metal boride thin films using liquid standards";
Microchemical Journal,
152
(2020),
104449;
S. 1
- 7.
L.C. Whitmore, M.R. Ahmadi, L Guetaz, H. Leitner, E. Povoden-Karadeniz, M. Stockinger, E. Kozeschnik:
"The microstructure of heat-treated nickel-based superalloy 718Plus";
Materials Science and Engineering A,
610
(2014),
S. 39
- 45.
L.C. Whitmore, M.R. Ahmadi, M. Stockinger, E. Povoden-Karadeniz, E. Kozeschnik, H. Leitner:
"Microstructural investigation of thermally aged nickel-based superalloy 718Plus";
Materials Science and Engineering A,
594
(2014),
S. 253
- 259.
L.C. Whitmore, H. Leitner, E. Povoden-Karadeniz, R. Radis, M. Stockinger et al.:
"Transmission electron microscopy of single and double aged 718Plus superalloy";
Materials Science and Engineering A,
534
(2012),
S. 413
- 423.
E. Wild, L. Wang, B. Hasse, T. Wroblewski, G. Goerigk, A. Pyzalla:
"Microstructure alterarations at the surface of a heavily corrugated rail with strong ripple formation ";
Wear,
254
(2003),
S. 876
- 883.
R. Wimmer, B. Steyrer, J. Woess, T. Koddenberg, N. Mundigler:
"3D Printing and Wood";
Pro Ligno,
11
(2015),
4;
S. 144
- 149.
A. Woesz, M. Rumpler, J. Stampfl, F. Varga, N. Fratzl-Zelman, P. Roschger, P. Fratzl, K. Klaushofer:
"Towards bone replacement materials from calcium phosphates via rapid prototyping and ceramic gelcasting";
Materials Science & Engineering C - Biomimetic and Supramolecular Systems,
25
(2005),
S. 181
- 186.
A. Woesz, J. Stampfl, P. Fratzl:
"Cellular Solids beyond the Apparent Density - an Experimental Assessment of Mechanical Properties";
Advanced Materials,
6
(2004),
3;
S. 134
- 138.
T. Wojcik, V. Ott, S. Özbilen, H. Leiste, S. Ulrich, P.H. Mayrhofer, H. Riedl, M. Stüber:
"Magnetron sputtered NiAl/TiBx multilayer thin films";
Journal of Vacuum Science & Technology A,
40
(2022),
033410;
S. 1
- 21.
T. Wojcik, M. Rath, E. Kozeschnik:
"Characterisation of secondary phases in Ni-base superalloy Rene 65";
Materials Science and Technology,
34
(2018),
13;
S. 1558
- 1564.
Y. Xu, H. Riedl, D. Holec, L. Chen, Y. Du, P.H. Mayrhofer:
"Thermal stability and oxidation resistance of sputtered TiAlCrN hard coatings";
Surface & Coatings Technology,
Supplement C
(2017),
324;
S. 48
- 56.
Z. Xu, Z. Zhang, M. Bartosik, Y. Zhang, P.H. Mayrhofer, Y. He:
"Insight into the structural evolution during TiN film growth via atomic resolution TEM";
Journal of Alloys and Compounds,
754
(2018),
S. 257
- 267.
T. Yamada, H. Euchner, M. de Boissieu, R. Tamura, H. Takakura, C. Gomez:
"Short and long-range ordering during the phase transition of the Zn6Sc 1/1 cubic approximant";
Journal of Physics: Condensed Matter,
25
(2013),
205405.
B. Yang, H.P. Degischer, H. Presslinger, G. Xia, P. Reisinger:
"Influence of Chemical Composition on High Temperature Tensile Properties of Carbon Steels";
Berg- und Hüttenmännische Monatshefte (BHM),
150
(2005),
9;
S. 313
- 320.
B. Yang, H.P. Degischer, G. Xia, H. Presslinger:
"Hot Toughness of Continuously Cast Steel Slabs during Reheating";
Steel Research International,
78
(2007),
6;
S. 482
- 491.
Q. Yang, W. Lengauer, T. Koch, M. Scheerer, I. Smid:
"Hardness and Elastic Properties of Ti(CxN1‑x), Zr(CxN1-x) and Hf(CxN1-x)";
Journal of Alloys and Compounds,
309
(2000),
S. 5
- 9.
J. Zalesak, M. Bartosik, R. Daniel, C. Mitterer, C. Krywka, D. Kiener, P.H. Mayrhofer, J. Keckes:
"Cross-sectional structure-property relationship in a graded nanocrystalline Ti1-xAlxN thin film";
Acta Materialia,
102
(2016),
S. 212
- 219.
S. Zamberger, P. Lang, G. Klösch, J. Klarner, E. Kozeschnik:
"Long-range diffusion of H in the presence of traps in a microalloyed steel";
Computational Materials Science,
113
(2016),
S. 266
- 274.
S. Zamberger, M. Pudar, K. Spiradek-Hahn, M. Reischl, E. Kozeschnik:
"Numerical simulation of the evolution of primary and secondary Nb(CN), Ti(CN) and AlN in Nb-microalloyed steel during continuous casting";
International Journal of Materials Research,
103
(2012),
6;
S. 680
- 687.
S. Zamberger, L.C. Whitmore, S. Krisam, T. Wojcik, E. Kozeschnik:
"Experimental and computational study of cementite precipitation in tempered martensite";
Modelling and Simulation in Materials Science and Engineering,
23
(2015),
Number 5, Paper 055012.
S. Zamberger, T. Wojcik, J. Klarner, G. Klösch, H. Schifferl, E. Kozeschnik:
"Computational and Experimental Analysis of Carbo-Nitride Precipitation in Tempered Martensite";
Steel Research International,
84
(2013),
1;
S. 20
- 30.
L. Zauner, A. Bahr, T Kozák, J Capek, T. Wojcik, O Hunold, S. Kolozsvári, P Zeman, P.H. Mayrhofer, H. Riedl:
"Time-averaged and time-resolved ion fluxes related to reactive HiPIMS deposition of Ti-Al-N films";
Surface & Coatings Technology,
424
(2021),
127638;
S. 1
- 12.
L. Zauner, Ph Ertelthaler, T. Wojcik, H. Bolvardi, S. Kolozsvári, P.H. Mayrhofer, H. Riedl:
"Reactive HiPIMS deposition of Ti-Al-N: Influence of the deposition parameters on the cubic to hexagonal phase transition";
Surface & Coatings Technology,
382
(2020),
125007;
S. 1
- 12.
L. Zauner, R Hahn, E. Aschauer, T. Wojcik, A. Davydok, O Hunold, P. Polcik, H. Riedl:
"Assessing the fracture and fatigue resistance of nanostructured thin films";
Acta Materialia,
239
(2022),
S. 118246-1
- 118246-11.
J. Zenisek, E. Kozeschnik, J. Svoboda, F. Fischer:
"A combined cluster dynamic/kinetic Monte Carlo model for precipitate nucleation in interstitial/substitutional alloys";
Modelling and Simulation in Materials Science and Engineering,
16
(2008),
7.
J. Zenisek, E. Kozeschnik, J. Svoboda, F.D. Fischer:
"Modelling the role of compositional fluctuations in nucleation kinetics";
Acta Materialia,
91
(2015),
91;
S. 365
- 376.
E. Zerobin, M. Markovic, Z. Tomasikova, X.H. Qin, D. Ret, P. Steinbauer, J. Kitzmüller, W. Steiger, P. Gruber, A. Ovsianikov, R. Liska, S. Baudis:
"Hyaluronic acid vinyl esters: A toolbox toward controlling mechanical properties of hydrogels for 3D microfabrication";
Journal of Polymer Science Part A: Polymer Chemistry,
58
(2020),
8;
S. 1288
- 1298.
J. Zhang, Cann, S.B. Maisel, K. Qu, E. Plancher, H. Springer, E. Povoden-Karadeniz et al.:
"Design of a V-Ti-Ni alloy with superelastic nano-precipitates";
Acta Materialia,
196
(2020),
S. 710
- 722.
W. Zhang, P.V. Hendriksen, E. Povoden-Karadeniz, M. Chen:
"Thermodynamic modeling of the Sr-Co-Fe-O system";
Solid State Ionics,
292
(2016),
S. 88
- 97.
W. Zhang, E. Povoden-Karadeniz, H. Xu, M. Chen:
"Thermodynamic modeling of the La-Co-O system";
Journal Of Phase Equilibria And Diffusion,
40
(2019),
2;
S. 219
- 234.
Z. Zhang, Z. Chen, D. Holec, C.H. Liebscher, N. Koutná, M. Bartosik, Y. Zheng, G Dehm, P.H. Mayrhofer:
"Mapping the mechanical properties in nitride coatings at the nanometer scale";
Acta Materialia,
194
(2020),
S. 343
- 353.
Z. Zhang, A. Ghasemi, N. Koutná, Z. Xu, T. Grünstäudl, K. Song, D. Holec, Y. He, P.H. Mayrhofer, M. Bartosik:
"Correlating point defects with mechanical properties in nanocrystalline TiN thin films";
Materials & Design,
207
(2021),
109844;
S. 1
- 10.
Z. Zhang, X. Gu, D. Holec, M. Bartosik, P.H. Mayrhofer, H. Duan:
"Superlattice-induced oscillations of interplanar distances and strain effects in the CrN/AlN system";
Physical Review B,
95
(2017),
S. 155305-1
- 155305-7.
L. Zhou, D. Holec, P.H. Mayrhofer:
"Ab initio study of the alloying effect of transition metals on structure, stability and toughness of CrN";
Journal of Physics D: Applied Physics,
46
(2013),
365301;
S. 1
- 7.
L. Zhou, D. Holec, P.H. Mayrhofer:
"First-principles study of elastic properties of Cr-Al-N";
Journal of Applied Physics,
113
(2013),
043511;
S. 1
- 8.
L. Zhou, F. Klimashin, D. Holec, P.H. Mayrhofer:
"Structural and mechanical properties of nitrogen-deficient cubic Cr-Mo-N and Cr-W-N systems";
Scripta Materialia,
123
(2016),
S. 34
- 37.
L. Zhou, F. Körmann, D. Holec, M. Bartosik, B. Grabowski, J. Neugebauer, P.H. Mayrhofer:
"Structural stability and thermodynamics of CrN magnetic phases from ab initio calculations and experiment";
Physical Review B,
90
(2014),
S. 184102-1
- 184102-12.
G. Zickler, R. Radis, R. Schnitzer, E. Kozeschnik, M. Stockinger, H. Leitner:
"The Precipitation Behavior of Superalloy ATI Allvac®718Plus";
Advanced Engineering Materials,
12
(2010),
S. 176
- 183.
G. Zickler, R. Schnitzer, R. Radis, R. Hochfellner, R. Schweins, M. Stockinger, H. Leitner:
"Microstructure and Mechanical Properties of the Superalloy ATI Allvac 718Plus";
Materials Science and Engineering A,
523
(2009),
1-2;
S. 295
- 303.
S. Zigon-Branc, M. Markovic, J. Van Hoorick, S. Van Vlierberghe, P. Dubruel, E. Zerobin, S. Baudis, A. Ovsianikov:
"Impact of hydrogel stiffness on differentiation of human adipose-derived stem cell microspheroids";
Tissue Engineering, Parts A, B, & C,
5
(2019),
1;
S. 1369
- 1381.
S. Zöhrer, M. Golizadeh, N. Koutná, D. Holec, R. Franz:
"Erosion and cathodic arc plasma of Nb-Al cathodes: composite vs. intermetallic";
Plasma Sources Science and Technology,
29
(2020),
S. 025022-1
- 025022.14.
D. Zügner, S. Zamberger, N. Yigit, G. Rupprechter, E. Kozeschnik:
"Thermal desorption spectra of H in an Fe-C-Nb alloy evaluated by diffusion simulation";
Steel Research International,
91
(2020),
S. 2000240.
Editorials in wiss. Zeitschriften
P. Colombo, H.P. Degischer:
"Highly Porous Metals and Ceramics";
Advanced Engineering Materials,
14
(2012),
12;
S. 1051.
Buchbeiträge
V. Archodoulaki:
"Rezyklieren von unverstärkten und faserverstärkten Kunststoffen";
in: "Leichtbau: Prinzipien, Werkstoffauswahl und Fertigungsvarianten",
H.P. Degischer, S. Lüftl (Hrg.);
Wiley-VCH,
2009,
ISBN: 978-3-527-32372-2,
S. 302
- 315.
V. Archodoulaki, S. Lüftl:
"Thermal Properties and Flammability of Polyoxymethylene";
in: "Polyoxymethylene Handbook",
herausgegeben von: S. Lüftl, Visakh P.M., S. Chandran; Wiley;
Scrivener Publishing, Wiley,
Beverly, MA,
2014,
ISBN: 978-1-118-38511-1,
S. 257
- 275.
V. Archodoulaki, S. Lüftl, S. Seidler:
"Charakterisierung des Abbauverhaltens von POM am Beispiel von Kfz-Teilen";
in: "Anwenderseminar Thermische Analyse in der Automobilindustrie",
W. Kunze (Hrg.);
TA Instruments,
Alzenau,
2002,
S. 75
- 88.
F. Beckmann, T. Lippmann, K.-D. Liß, R. Martins, J. Metge, A. Pyzalla, A. Schreyer:
"High Energy Materials Science";
in: "A Low Emittance Synchrotron Radiation Source, Technical Design Report, Materials Science Beamline",
Hasylab,
Hamburg,
2004,
S. 287
- 302.
C. Bierögel, I. Kotter, B. Langer, R. Lach, K. Reincke, V. Archodoulaki, T. Koch:
"Landolt-Börnstein, Volume 6 Polymers, Subvolume A Polymer Solids and Polymer Melts, Part 3 Mechanical and Thermomechanical Properties of Polymers";
in: "Landolt-Börnstein, Volume 6 Polymers, Subvolume A Polymer Solids and Polymer Melts, Part 3 Mechanical and Thermomechanical Properties of Polymers",
Springer,
Berlin,
2014,
ISBN: 978-3-642-55165-9,
S. 34
- 61.
C. Bierögel, S. Seidler, W. Grellmann:
"Hybride Verfahren der Kunststoffdiagnostik";
in: "Kunststoffprüfung",
W. Grellmann, S. Seidler (Hrg.);
Carl Hanser Verlag,
München, Wien,
2005,
ISBN: 3-446-22086-0,
S. 521
- 536.
A. Borbély, E. Maire, P. Cloetens, G. Requena:
"Submicron tomography using high energy synchrotron radiation";
in: "Fabrication and Cheracterization in the Micro-Nano Range",
A. Lasagni, F. Lasagni (Hrg.);
Springer-Verlag,
Berlin,
2011,
ISBN: 978-3-642-17781-1,
S. 151
- 170.
H.P. Degischer:
"Allgemeine Einleitung";
in: "Leichtbau: Prinzipien, Werkstoffauswahl und Fertigungsvarianten",
H.P. Degischer, S. Lüftl (Hrg.);
Wiley-VCH,
2009,
ISBN: 978-3-527-32372-2,
S. XI
- XIV.
H.P. Degischer:
"Kapitel 15: Werkstoffe - Leistungspotenziale nutzen";
in: "Maschinenbau. Ein Lehrbuch für das ganze Bachelor-Studium",
W. Skolaut (Hrg.);
Springer Vieweg,
Wiesbaden, Berlin, Heidelberg,
2014, (eingeladen),
ISBN: 978-3-8274-2553-9,
S. 359
- 512.
H.P. Degischer:
"Kapitel 16: Legierungstechnologie - Werkstoffe an Anforderungen anpassen";
in: "Maschinenbau. Ein Lehrbuch für das ganze Bachelor-Studium",
W. Skolaut (Hrg.);
Springer Vieweg,
Wiesbaden, Berlin, Heidelberg,
2014, (eingeladen),
ISBN: 978-3-8274-2553-9,
S. 513
- 545.
H.P. Degischer:
"Kapitel 33: Nachhaltige Produktion - Emissionen vermeiden und Ressourcen schonen";
in: "Maschinenbau. Ein Lehrbuch für das ganze Bachelor-Studium",
W. Skolaut (Hrg.);
Springer Vieweg,
Wiesbaden, Berlin, Heidelberg,
2014, (eingeladen),
ISBN: 978-3-8274-2553-9,
S. 1141
- 1158.
H.P. Degischer:
"Material Definitions, Processing, and Recycling";
in: "Handbook of Cellular Metals",
H.P. Degischer, B. Kriszt (Hrg.);
Wiley-VCH,
Weinheim,
2002,
ISBN: 3-527-30339-1,
S. 5
- 7.
H.P. Degischer:
"Preface - Metal Matrix Composites";
in: "Metal Matrix Composites in Industry; An Introduction and a Survey",
A. Evans, C. San Marchi, A. Mortensen (Hrg.);
Kluwer,
2003,
ISBN: 1-4020-7521-9,
S. 7
- 10.
H.P. Degischer:
"Recycling of Cellular Metals";
in: "Handbook of Cellular Metals",
H.P. Degischer, B. Kriszt (Hrg.);
Wiley-VCH,
Weinheim,
2002,
ISBN: 3-527-30339-1,
S. 28
- 33.
H.P. Degischer:
"Strengths, Weakness, and Opportunities";
in: "Handbook of Cellular Metals",
H.P. Degischer, B. Kriszt (Hrg.);
Wiley-VCH,
Weinheim,
2002,
ISBN: 3-527-30339-1,
S. 355
- 363.
H.P. Degischer:
"Werkstoffe";
in: "Leichtbau: Prinzipien, Werkstoffauswahl und Fertigungsvarianten",
H.P. Degischer, S. Lüftl (Hrg.);
Wiley-VCH,
2009,
ISBN: 978-3-527-32372-2,
S. 77
- 105.
H.P. Degischer, B. Foroughi, A. Kottar:
"Tomography Based Material Model and Simulation of Deformation";
in: "Metal Foams",
N. Dukhan (Hrg.);
DEStech Publications, Inc.,
2013, (eingeladen),
ISBN: 978-1-60595-014-3,
S. 97
- 130.
H.P. Degischer, A. Kottar:
"Considerations on Quality Features";
in: "Handbook of Cellular Metals",
H.P. Degischer, B. Kriszt (Hrg.);
Wiley-VCH,
Weinheim,
2002,
ISBN: 3-527-30339-1,
S. 156
- 178.
B. Foroughi, B. Kriszt, H.P. Degischer:
"Mesomodel of Real Cellular Structures";
in: "Handbook of Cellular Metals",
H.P. Degischer, B. Kriszt (Hrg.);
Wiley-VCH,
Weinheim,
2002,
ISBN: 3-527-30339-1,
S. 281
- 297.
J. Garcia, W. Lengauer, J. Vivas, K. Dreyer, H. van den Berg, H. Daub, D. Kassel:
"Functionally graded hardmetal substrates for coated cutting tools";
in: "Metal Cutting and High Speed Machining",
D. Dudzinski, A. Molinari, H. Schulz (Hrg.);
Kluwer,
2002,
ISBN: 0306467259,
S. 311
- 318.
W. Grellmann, R. Lach, S. Seidler:
"Determination of Geometry - Independent Fracture Mechanics Values of Polymers";
in: "From Charpy to Present Impact Testing; Proceedings of Charpy Centenary Conference 2001",
D. Francois, A. Pineau (Hrg.);
herausgegeben von: ESIS;
Elsevier,
2002,
S. 145
- 154.
W. Grellmann, S. Seidler:
"Einleitung";
in: "Kunststoffprüfung",
W. Grellmann, S. Seidler (Hrg.);
Carl Hanser Verlag,
München, Wien,
2005,
ISBN: 3-446-22086-0,
S. 1
- 14.
W. Grellmann, S. Seidler:
"Zähigkeitsbewertung mit bruchmechanischen Methoden";
in: "Kunststoffprüfung",
W. Grellmann, S. Seidler (Hrg.);
Carl Hanser Verlag,
München, Wien,
2005,
ISBN: 3-446-22086-0,
S. 243
- 298.
B. Husar, M. Hatzenbichler, V. Mironov, R. Liska, J. Stampfl, A. Ovsianikov:
"Photopolymerization-based additive manufacturing for the development of 3D porous scaffolds";
in: "Biomaterials for Bone Regeneration",
herausgegeben von: P. Dubruel and S. V. Vlierberghe;
Elsevier Science Ltd.,
2014,
ISBN: 978-0-85709-804-7,
S. 149
- 201.
J. Keckes, I. Burgert, H. Lichtenegger, A. Reiterer, S. Stanzl-Tschegg, P. Fratzl:
"Microfibril angle in wood - Characterization using X-ray scattering and influence on mechanical properties";
in: "Wood Fibre Cell Walls: Methods to study their formation, structure and Properties. COST Action E20",
herausgegeben von: COST;
Swedisch University of Agricultural Sciences,
Uppsala, Sweden,
2004,
ISBN: 91-576-6803-5,
S. 189
- 202.
M. Kettner, H.P. Degischer:
"Rezyklieren metallischer Werkstoffe";
in: "Leichtbau: Prinzipien, Werkstoffauswahl und Fertigungsvarianten",
H.P. Degischer, S. Lüftl (Hrg.);
Wiley-VCH,
2009,
ISBN: 978-3-527-32372-2,
S. 279
- 301.
T. Koch, S. Seidler:
"Mechanical Properties of Micro-Injection Moulded Components";
in: "Chemical and Physical Aspect of Polymer Science and Engineering",
K. Lederer, N. Aust (Hrg.);
Wiley-VCH,
Weinheim,
2002,
ISBN: 3-527-30471-1,
S. 499
- 506.
B. Kriszt:
"Characterization of Cellular Metals";
in: "Handbook of Cellular Metals",
H.P. Degischer, B. Kriszt (Hrg.);
Wiley-VCH,
Weinheim,
2002,
ISBN: 3-527-30339-1,
S. 127
- 129.
B. Kriszt, U. Martin, U. Mosler:
"Characterization of Cellular and Foamed Metals";
in: "Handbook of Cellular Metals",
H.P. Degischer, B. Kriszt (Hrg.);
Wiley-VCH,
Weinheim,
2002,
ISBN: 3-527-30339-1,
S. 130
- 145.
S. Kumar:
"Isothermal transformation behavior and microstructural evolution of Micro alloyed steel";
in: "Engineering Steels and High Entropy-Alloys",
IntechOpen,
London UK,
2019,
ISBN: 978-1-78985-948-5,
12 S.
S. Ligon, J. Kumpfmüller, N.U Pucher, J. Stampfl, R. Liska:
"Fabrication ofWaveguides and Other Optical Elements by Multiphoton Lithography";
in: "Multiphoton Lithography",
Wiley-VCH,
Weinheim,
2016,
ISBN: 978-3-527-33717-0,
S. 267
- 296.
R. Liska, J. Stampfl:
"Photopolymers for rapid prototyping";
in: "Basics and Applications of Photopolymerization Reactions",
J.P. Fouassier, X. Allonas (Hrg.);
Research Signpost,
Kerala, India,
2010,
ISBN: 978-81-308-0430-9,
S. 147
- 173.
P.H. Mayrhofer, R. Rachbauer, D. Holec, F. Rovere, J.M. Schneider:
"Protective Transition Metal Nitride Coatings";
in: "Comprehensive Materials Processing, Volume 4: Films and Coatings: Technology and Recent Development",
Elsevier,
2014, (eingeladen),
S. 355
- 388.
C. Motz, R. Pippan, B. Kriszt:
"Mechanical Properties and Determination";
in: "Handbook of Cellular Metals",
H.P. Degischer, B. Kriszt (Hrg.);
Wiley-VCH,
Weinheim,
2002,
ISBN: 3-527-30339-1,
S. 183
- 202.
A. Neumeister, S. Passinger, S. Duziak, J. Stampfl, A. Ostendorf:
"Micro- and Nanoparts generated by laser-based Solid Freeform Fabrication (SFF) technologies";
in: "Advances in laser materials processing technology: Technology, research and application",
J. Lawrence, J. Pou, D. Low, E. Toyserkani (Hrg.);
Woodhead Publishing Limited,
Cambridge, UK,
2010,
ISBN: 1845694740,
S. 340
- 389.
M Palmstingl, D. Salaberger, T. Koch:
"Morphology and fatigue behaviour of short-glass fibre-reinforced polypropylene";
in: "Deformation and fracture behaviour of polymer materials",
247;
W. Grellmann, B. Langer (Hrg.);
herausgegeben von: Springer Series in Materials Science;
Springer International Publishing AG,
Cham,
2017,
ISBN: 978-3-319-41877-3,
S. 315
- 334.
C. Poletti, H.P. Degischer:
"Werkstoffauswahl";
in: "Leichtbau. Prinzipien, Werkstoffauswahl und Werkstoffvarianten",
H.P. Degischer, S. Lüftl (Hrg.);
Wiley-VCH,
2009,
ISBN: 978-3-527-32372-2,
S. 138
- 170.
A. Pyzalla, W. Reimers:
"Study of stress gradients using synchrotron X-raydiffraction";
in: "Analysis of Residual Stress by Diffraction using Neutron and Synchrotron Radiation",
M. Fitzpatrick, A. Lodini (Hrg.);
Taylor & Francis Group,
New York, USA,
2003,
ISBN: 0-415-30397-4,
S. 219
- 232.
A. Pyzalla, J. Wegener, R. Martins, W. Reimers:
"Experimentelle Analysen der Gefüge-, Textur- und Eigenspannungsentwicklung umgeformter mehrphasiger Werkstoffe";
in: "Abschlußbericht zum DFG-Schwerpunktprogramm 1074: Erweiterung der Formgebungsgrenzen bei Umformprozessen",
herausgegeben von: DFG Deutsche Forschungsgemeinschaft;
Verlagshaus Mainz GmbH,
2005,
ISBN: 3-86130-416-3,
S. 210
- 217.
G. Requena, G. Garces, R. Fernández, M. Schöbel:
"Determination of Internal Stresses in Lightweight Metal Matrix Composites";
in: "Neutron Diffraction",
herausgegeben von: I. Khidirov;
InTech,
2012,
ISBN: 978-953-51-0307-3,
S. 257
- 286.
C. Schoberleitner, T. Koch, V. Archodoulaki:
"Epoxy modifications - A novel sealing material for rehabilitation of pipe joints";
in: "Deformation and fracture behaviour of polymer materials",
247;
W. Grellmann, B. Langer (Hrg.);
herausgegeben von: Springer Series in Materials Science;
Springer,
Cham Switzerland,
2017,
ISBN: 978-3-319-41877-3,
S. 243
- 253.
M. Schöbel, G. Fiedler, H.P. Degischer, W. Altendorfer, S. Vaucher:
"The effects of different architectures on thermal fatigue in particle reinforced MMC for heat sink applications";
in: "Advanced Materials Research Vol. 59",
C. Linsmeier, M. Reinelt (Hrg.);
Trans Tech Publications Ltd.,
2009,
S. 177
- 181.
S. Seidler, W. Grellmann:
"Härteprüfverfahren";
in: "Kunststoffprüfung",
W. Grellmann, S. Seidler (Hrg.);
Carl Hanser Verlag,
München, Wien,
2005,
ISBN: 3-446-22086-0,
S. 192
- 214.
S. Seidler, W. Grellmann:
"Schlagartige Beanspruchung";
in: "Kunststoffprüfung",
W. Grellmann, S. Seidler (Hrg.);
Carl Hanser Verlag,
München,
2005,
ISBN: 3-446-22086-0,
S. 156
- 169.
S. Seidler, W. Grellmann:
"Thermische Eigenschaften";
in: "Kunststoffprüfung",
W. Grellmann, S. Seidler (Hrg.);
Carl Hanser Verlag,
München, Wien,
2005,
ISBN: 3-446-22086-0,
S. 299
- 317.
S. Seidler, W. Grellmann:
"Wärmeformbeständigkeit";
in: "Kunststoffprüfung",
W. Grellmann, S. Seidler (Hrg.);
Carl Hanser Verlag,
München, Wien,
2005,
ISBN: 3-446-22086-0,
S. 591
- 599.
J. Stampfl, R. Gmeiner:
"Additive Fertigung in der digitalen Zahnmedizin";
in: "Werkstoffkunde in der Zahnmedizin",
M. Rosentritt et al. (Hrg.);
Georg Thieme Verlag KG,
2018,
ISBN: 978-3-13-240108-2,
S. 448
- 454.
J. Stampfl, R. Liska:
"Polymerizable Hydrogels for Rapid Prototyping: Chemistry, Photolithography, and Mechanical Properties";
in: "Stereolithography",
P. Bartolo (Hrg.);
Springer-Verlag,
New York,
2011,
ISBN: 978-0-387-92903-3,
S. 161
- 182.
J. Stampfl, H. E. Pettermann, R. Liska:
"Bioinspired Cellular Structures: Additive Manufacturing and Mechanical Properties";
in: "Biomimetics - Materials, Structures and Processes",
P. Gruber, D. Bruckner, Ch. Hellmich, H. Schmiedmayer, H. Stachelberger, I. Gebeshuber (Hrg.);
Springer-Verlag,
Berlin,
2011,
ISBN: 978-3642119330,
S. 105
- 123.
J. Stampfl, H. E. Pettermann, M.H. Luxner:
"Fabrication and Characterization in the Micro-Nano Range";
in: "Fabrication and Characterization in the Micro/Nano Range",
F. Lasagni, A. Lasagni (Hrg.);
Springer-Verlag,
Berlin,
2011,
ISBN: 978-3-642-17781-1,
S. 95
- 117.
S. Zigon-Branc, A. Barlic, M. Jeras:
"In vitro Cell-Based Assays for Potency Testing of Anti-TNF-α Biological Drugs";
in: "Tumor necrosis factor",
IntechOpen,
2019,
S. 1
- 18.
Beiträge in Tagungsbänden
W. Allertshammer:
"Spannungsrisskorrosion bei Messing";
in: "Korrosion und Korrosionsschutz in Trinkwasser-Installationen",
herausgegeben von: Bundesanstalt für Materialforschung und -prüfung;
GfKORR - Gesellschaft für Korrosionsschutz e. V.,
Frankfurt am Main,
2004,
S. 60
- 71.
K. Aßmus, W. Hübner, A. Pyzalla, H. Pinto:
"Die Entwicklung des Gefüges in der Verschleißspur bei Gleitverschleiß von FeCrNi- Legierungen";
in: "Reibung, Schierung und Verschleiß Forschung und praktische Anwendung",
herausgegeben von: Deutsche Wissenschaftliche Gesellschaft für Erdöl, Erdgas und Kohle e.V.;
GfT Gesellschaft für Tribologie e.V.,
Göttingen Deutschland,
2003,
ISBN: 3-00-003404-8,
S. 6/1
- 6/8.
N. Babscan, S. Beke, P. Makk, P. Soki, G. Szamel, H.P. Degischer, R. Mokso:
"Aluhab - The Superior Aluminium Foam";
in: "13th International Conference on Aluminum Alloys (ICAA 13)",
H. Weiland, A Rollett, W. Cassada (Hrg.);
herausgegeben von: TMS (The Minerals, Metals & Materials Society);
Springer International Publishing,
2012,
ISBN: 978-3-319-48761-8,
S. 1005
- 1010.
H. Buken, P. Sherstnev, E. Kozeschnik:
"Simultaneous precipitation and recrystallization during hot deformation of Ti, Nb and V microalloyed steel";
in: "THERMEC 2016",
Trans Tech Publications Ltd.,
2016,
S. 2463
- 2467.
P Burgholzer, C Hofer, B Reitinger, A. Mohammed, H.P. Degischer, D Loidl, P. Schulz, R. Nuster, G. Paltauf:
"Laser ultrasonics for non-contact determination of material properties of continous fiber reinforced or layered materials";
in: "9th European Conference on NDT (DGZfP Berichtsband BB 103 - Cd)",
herausgegeben von: Deutsche Gesellschaft für zerstörungsfreie Prüfung;
DGZfP,
2006,
Paper-Nr. Th.4.7.2,
10 S.
D. Cirstea, E. Povoden-Karadeniz, E. Kozeschnik, M. Lungu, P. Lang, A. Balagurov, V. Cirstea:
"Thermokinetic simulation of precipitation in NiTi shape memory alloys";
in: "IOP Conference Series: Materials Science and Engineering. International Conference on Innovative Research - ICIR EUROINVENT 2017",
209;
IOP Publishing,
UK,
2017,
Paper-Nr. 012057,
8 S.
H.P. Degischer, A. Kottar, B. Foroughi et al.:
"Tensile Deformation and Cracking Sequence of Foamed AlSi10 with Skin";
in: "MetFoam 2007 - Porous Metals and Metallic Foams",
DEStech Publications, Inc.,
2008,
ISBN: 978-1-932078-28-2,
S. 39
- 42.
H.P. Degischer, F. G. Rammerstorfer, O. Beffort:
"Design Rules for Selective Reinforcement of Mg Castings by MMC Inserts";
in: "Magnesium Alloys and their Applications",
K. Kainer (Hrg.);
Wiley-VCH,
Weinheim,
2000,
ISBN: 97-83527309-75-7,
S. 207
- 214.
H. Euchner, M. de Boissieu, T. Yamada et al.:
"Atomic Dynamics in Complex Metallic Alloys";
in: "MRS Proceedings",
herausgegeben von: Cambridge Journals Online;
Cambridge Journals,
2013, (eingeladen).
A. Falahati, P. Lang, M. Ahmadi, P. Warczok, E. Povoden-Karadeniz, E. Kozeschnik:
"Computer Simulationen der Ausscheidungs-Mikrostruktur- und Festigkeitsentwicklung von Al-Mg-Si Legierungen in mehrstufigen Wärmebehandlungen";
in: "MOBILITÄT IM WANDEL: Anforderungen an modernen Leichtbau und Leicchtmetalle",
LKR-Verlag,
5282 Ranshofen, Österreich,
2010,
ISBN: 978-3-902092-06-9,
S. 61
- 75.
M. Franz, K. Makarovic, S. Lüftl, A. Maric, I. Atassi, M. Hrovat, N. V. Blaz, G. Radosavljevic:
"Characterization and Binder Burnout Studies of Ferrite LTCC Tapes";
in: "Proceedings of the 2013 36th International Spring Seminar on Electronics Technology",
IEEE Xplore,
2013,
ISBN: 978-1-4799-0036-7,
S. 17
- 23.
R. Gradinger, M. Seitzberger, F. G. Rammerstorfer, H.P. Degischer, M. Blaimschein, C. Walch:
"Aluminium Foam Filled Steel Tubes as Composite Shock Absorbers";
in: "Metal Foams and Porous Metal Structures",
J. Banhart, M.F. Ashby, N. A. Fleck (Hrg.);
Verlag MIT Publishing,
Bremen,
1999,
S. 313
- 316.
R. Haas, P. Pongratz, H.P. Degischer:
"Microstructure and Phases in Stainless Steel Violin Strings";
in: "Microscopy and Microanalys6th Multinational Congress on Microscopy - European Extension",
Croatian Society for Electron Mircoscopy,
Zagreb, Croatia,
2003,
ISBN: 953-99339-0-0,
S. 412
- 413.
M. Hartmann, J. Stampfl:
"Additive Fertigung in der digitalen Zahnheilkunde";
in: "BHM Berg- und Hüttenmännische Monatshefte",
164;
E. Podhovnik (Hrg.);
herausgegeben von: Austrian Society for Metallurgy and Metals;
Springer,
Wien New York,
2019,
ISSN: 1613-7531,
S. 141
- 146.
A. Hatab, A. Falahati, A. Danninger:
"Contribution Of Individual Hardening Process Parameters On Mechanical Properties Of 6061 Aluminum Alloy - Taguchi Approach";
in: "Proceedings of METAL 2014",
TANGER Ltd.,
2014,
ISBN: 978-80-87294-52-9,
7 S.
M. Hochegger, B. Harrer, S. Ilie, H.P. Degischer:
"Darstellung von Schädigungsmechanismen in Baustahlbrammen mittels Röntgen-Computertomografie";
in: "Industrielle Computertomografie Tagung",
Shaker Verlag GmbH,
2010,
ISBN: 978-3-8322-9418-2,
S. 93
- 98.
R. Inführ, R. Liska, H. Lichtenegger, Ch. Fritscher, J. Stampfl, N. Hüsing:
"3D Lithography of Organo-Soluble Mold Materials for Sol-Gel Nanocomposites";
in: "RadTech Europe 2005 Conference Proceedings Volume II",
Rad Tech Europe Association,
2005,
ISBN: 3-87870-330-9,
S. 487
- 494.
R. Jancek, A. Kottar, B. Kriszt, H.P. Degischer:
"Strain-hardening and damage of foamed aluminium during tensile deformation";
in: "Cellular Metals and Polymers - CMaP, Proceedings of the Symposium on Cellular Metals and Polymers",
Trans Tech Publications Ltd.,
Zürich (Switzerland),
2005,
ISBN: 0-87849-491-x,
S. 107
- 110.
T. Koch, S. Seidler, E. Halwax, S. Bernstoff:
"Microhardness of quenched iPP";
in: "11th International Conference Polymeric Materials",
herausgegeben von: Prof. Dr. Georg Michler, Martin-Luther-Universität Halle Wittenberg, Institut für Werkstoffwissenschaften, 06099 Halle;
Druck-Zuck,
Halle,
2004,
ISBN: 3-928466-68-2,
S. 13.
S. Krisam, E. Povoden-Karadeniz:
"Optimierte Probenpräparation und Nassätzverfahren von thermomechanisch behandelten Inconel 718 und Rene65 Nickelbasis- Superlegierungsproben";
in: "Fortschritte in der Metallographie",
20;
G Petzow, F. Mücklich (Hrg.);
herausgegeben von: DGM;
DGM / MATINFO Werkstoff-Informationsgesellschaft,
St. Augustin,
2020,
ISBN: 978-3-88355-422-8,
S. 106
- 111.
P. Lang, A. Falahati, M.R. Ahmadi, P. Warczok, E. Povoden-Karadeniz, R. Radis, E. Kozeschnik:
"Modeling the influence of cooling rate on the precipitate evolution in Al-Mg-Si (Cu) alloys";
in: "Materials Science and Technology 2011",
Materials Science and Technology 2011,
Columbus; Ohio; USA,
2011,
S. 284
- 291.
F. Lasagni, G. Requena, H.P. Degischer, B. Mingler, M. Papakyriacou:
"Entmischung und Einformung des Si in Al-Si-Legierungen";
in: "Fortschritte in der Metallographie. Sonderbände der Praktischen Metallographie 36",
DGM / MATINFO Werkstoff-Informationsgesellschaft,
Frankfurt,
2004,
ISBN: 3-88355-336-0,
S. 443
- 448.
R. Liska, M. Schuster, B. Seidl, R. Inführ, C. Fritscher, J. Stampfl, H. Lichtenegger, C. Turecek, F. Varga, V. Schmidt, L. Kuna, A. Haase:
"New Photopolymers for Rapid Prototyping";
in: "Radcure Coatings and Inks: Cost & Performance",
PRA Coatings Technology Centre,
Hamton, Middlesex, UK,
2006,
ISBN: 0-9551317-3-1,
S. 1
- 8.
M.H. Luxner, J. Stampfl, A. Woesz, P. Fratzl, H. E. Pettermann:
"Influence of Structural Disorder on the Performance of 3D Open Cell Structures";
in: "Proceedings of the III European Conference on Computational Solids and Structural Mechanics",
herausgegeben von: ECCOMAS;
Associção Portuguesa de Mecânica Teórica, Aplicada e Computacional,
Lisboa,
2006,
Paper-Nr. 1752,
15 S.
S. Müller, I. Denks, K. Müller, A. Pyzalla:
"Extrusion of Magnesium Profiles and Microstructure Characterization";
in: "Magnesium Proceedings of the 6th International Conference Magnesium Alloys and Their Applications",
K. Kainer (Hrg.);
Wiley-VCH,
Weinheim Deutschland,
2003,
ISBN: 3-527-30975-6,
S. 254
- 259.
P. Peterko, Ch. Habersohn, C. Lechner, H. Kaminski, M. Jech, F. Bleicher:
"Untersuchung des Einflusses des Schlagverdichtens auf die tribologischen Eigenschaften von Metalloberflächen";
in: "Proceedings of the ÖTG Symposium 2011",
F. Franek (Hrg.);
herausgegeben von: Österreichische Tribologie Gesellschaft;
Österreichische Tribologie Gesellschaft,
Wiener Neustadt,
2011, (eingeladen),
ISBN: 978-3-901657-40-5,
S. 49
- 56.
E. Povoden-Karadeniz, D. Cirstea, E. Kozeschnik:
"Prediction of precipitate evolution and martensite transformation in Ti-Ni-Cu shape memory alloys by computational thermodynamics";
in: "IOP Conference Series: Materials Science and Engineering (ic-cmtp3: 3rd International Conference on Competitive Materials and Technology Processes, 2014, Miskolc)",
Volume 123;
IOP Publishing,
UK,
2016,
Paper-Nr. 012038,
7 S.
N.U Pucher, V. Satzinger, A. Rosspeintner, C. Heller, G. Gescheidt, V. Schmidt, J. Stampfl, R. Liska:
"Novel Highly Potential Initiators for the Two-Photon-Induced Photopolymerization Process";
in: "Mater. Res. Soc. Symp. Proc.",
herausgegeben von: Materials Research Society;
Material Research Society,
Warrendale, PA, USA,
2009, (eingeladen),
6 S.
M. Rath, E. Kozeschnik:
"Coupled grain growth and precipitation modeling in multi-phase systems";
in: "Recrystallization and Grain Growth V. Materials Science Forum, Volume 753",
Trans Tech Publications Ltd.,
2013,
ISBN: 978-3-03785-688-8,
S. 357
- 360.
G. Reinisch, R. Markut, S. Seidler:
"Tribological Aspects and Nanoindentation Measurements of the "Viennese Cross-Linked Hip Retrievals"";
in: "COST 533 biotribology - Materials for improved wear resistance of total artificial joints",
herausgegeben von: Tekniker research alliance;
Tekniker - research alliance,
2007,
ISBN: 978-84-932064-4-4,
S. 13
- 25.
M. Santos, M. Spitzbart, M. Weinlich, T. Leitner, D. Laner, O. Cencic, H. Rechberger:
"MoveRec: On-line Tool for Estimating the Material Composition of WEEE Input Streams";
in: "Electronics Goes Green 2012+",
herausgegeben von: Fraunhofer IZM;
Fraunhofer IZM,
Berlin,
2012,
S. 1
- 5.
J.-A. Schönherr, M. Müller, B. Glasmacher:
"Concept, design and construction of an active supporting foot prosthesis";
in: "Proceedings BMT 2014",
herausgegeben von: DGBMT;
De Gruyter,
Berlin,
2014,
ISSN: 0013-5585,
S. S1165
- S1168.
J. Stampfl, M. Seyr, M.H. Luxner, H. E. Pettermann, A. Wöss, P. Fratzl:
"Regular, Low Density Cellular Structures-Rapid Prototyping, Numerical Simulation, Mechanical Testing";
in: "Biological and Bioinspired Materials and Devices (Mater. Res. Soc. Symp. Proc. 823)",
J. Aizenberg, W.J. Landis, C. Orme, R. Wang (Hrg.);
herausgegeben von: MRS;
Materials Research Society,
Warrendale, PA,
2004,
ISBN: 1-55899-773-3,
Paper-Nr. W8.8,
6 S.
G. Stechauner, E. Kozeschnik:
"Simulation of Cu precipitation in the Fe-Cu binary system";
in: "Advanced Materials Reasearch Vol. 922",
Trans Tech Publications Ltd.,
2014,
S. 728
- 733.
M. Stefenelli, A. Riedl, J. Todt, M. Bartosik, R. Daniel, C. Mitterer, J. Keckes:
"Macroscopic fracture behaviour of CrN hard coatings evaluated by X-ray diffraction coupled with four-point bending";
in: "Materials Science Forum",
Trans Tech Publications Ltd.,
2014,
S. 272
- 279.
T. Weisz, P. Warczok, T. Ebner, A. Falahati, E. Kozeschnik:
"Simulation of Natural Aging in Al-Mg-Si alloys";
in: "Materials Science Forum - Proceedings LMT2015",
Vols. 828-829;
Trans Tech Publications,
2015,
S. 468
- 473.
R. Wimmer, B. Steyrer, J. Woess, T. Koddenberg, N. Mundigler:
"3D Printing and Wood";
in: "Wood Science and Engineering in the third Millenium",
10;
herausgegeben von: Transilvania University;
Transilvania University of Brasov,
Brasov, Romania,
2015,
ISSN: 1843-2689,
S. 145
- 150.
A. Woesz, M. Rumpler, I. Manjubala, I. Pilz, F. Varga, J. Stampfl, P. Fratzl:
"The influence of the thermal treatment of hydroxylapatite scaffolds on the physical properties and the bone cell ingrowth behaviour";
in: "Structure and Mechanical Behavior of Biological Materials",
P. Fratzl et al. (Hrg.);
herausgegeben von: Symp.Proc. Vol 874;
Materials Research Society,
Warrendale, PA,
2005,
S. L7.9.1.
B. Yang, C. Zaruba, H. Knoblich, H.P. Degischer, G. Xia, H. Preßlinger, P. Reisinger, K. Spiradek-Hahn, J. Wosik:
"Gefüge und Zähigkeit von Stahlbrammen bei erhöhter Temperatur";
in: "Fortschritte in der Metallographie. Sonderbände der Praktischen Metallographie; 36",
DGM / MATINFO Werkstoff-Informationsgesellschaft,
Frankfurt,
2004,
ISBN: 3-88355-336-0,
S. 479
- 484.
D. Zügner, S. Holly, W. Ernst, R. Schnitzer, E. Kozeschnik:
"Computational analysis of the yield stress of ultra-high strength all-weld metals";
in: "Mathematical Modelling of Weld Phenomena 12",
C. Sommitsch, N. Enzinger, P. Mayr (Hrg.);
Verlag der Technischen Universität Graz,
2019,
ISBN: 978-3-85125-615-4,
S. 199
- 217.
Vorträge und Posterpräsentationen (mit Tagungsband-Eintrag)
B. Adjassoho, E. Kozeschnik, C. Lechner, F. Bleicher, S. Gössinger, C. Bauer:
"Induction of residual stresses and increase of surface hardness by Machine Hammer Peening technology";
Vortrag: 23rd International DAAAM Symposium,
Zadar, Kroazien;
24.10.2012
- 27.10.2012; in: "Annals of DAAAM for 2012&Proceeding of the 23rd International DAAAM Symposium",
B. Katalinic (Hrg.);
Annals of DAAAM for 2012 & Proceeding of the 23rd International DAAAM Symposium/DAAAM International Vienna,
23/1
(2012),
ISSN: 2304-1382;
S. 697
- 702.
V. Archodoulaki:
"Degradation and Stabiliser consumption of thermoplastics";
Hauptvortrag: Polymertec16,
Merseburg (eingeladen);
14.06.2016
- 17.06.2016; in: "Polymertec16",
B. Langer, P. Michel (Hrg.);
(2016),
S. 80.
V. Archodoulaki, B. Duscher, A. Laska:
"Evaluation Of Structural Modification Of Conventional And Crosslinked Pe-Uhmw Acetabular Liners After In-Vivo Use";
Poster: Modest 2016, 9th International Conference on Modification Degradation and Stabilisation of Polymers,
Krakau;
04.09.2016
- 09.09.2016; in: "Modest 2016, 9th International Conference on Modification Degradation and Stabilisation of Polymers",
(2016),
S. 183.
V. Archodoulaki, T. Koch, S. Lüftl:
"Effects of blending polyamide, polypropylene or polyolefin platomer with polyoxymethylene homopolymer on thermal degradation properties";
Poster: MoDeSt (international conference on Modification, Degradation and Stabilisation of polymers),
Prag;
02.09.2012
- 06.09.2012; in: "7th MoDeSt Conference Book of Abstracts",
Academy of Science of the Czech Republic,
Prag
(2012),
ISBN: 978-80-85009-74-3;
2 S.
V. Archodoulaki, T. Koch, S. Lüftl, S. Seidler:
"Auswirkungen von Verarbeitung, Alterung und Rezyklierung auf die Eigenschaften von Polyoxymethylen";
Poster: 11. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Merseburg/ Germany;
20.06.2007
- 22.06.2007; in: "11. Problemseminar Deformations- und Bruchverhalten von Kunststoffen",
(2007),
5 S.
V. Archodoulaki, T. Koch, S. Lüftl, S. Seidler:
"Oxidationsinduktionszeit/-temperatur Versuche an Polyoxymethylen (POM) zur Untersuchung der thermooxidativen Alterung";
Vortrag: 13. International Conference Polymeric Materials 2008,
Halle;
24.09.2008
- 26.09.2008; in: "Polymeric Materials 2008",
(2008),
ISBN: 978-3-940744-17-3;
S. C22.
V. Archodoulaki, G. Kuschnig, S. Lüftl, M. Werderitsch:
"Silane modified polyether sealant failure in drinking water pipes";
Vortrag: 6th international conference on Modification, Stabilization and Degradation of Polymers,
Athen;
05.09.2010
- 09.09.2010; in: "MoDeSt2010, Athens, Greece, Proceedings",
MoDeSt Hellenic Organizing Committee,
(2010),
ISBN: 978-960-99362-0-0;
2 S.
V. Archodoulaki, A. Laska, A. Kolb:
"PE-UHMW für Hüftprothesen";
Vortrag: polymertec14,
Merseburg Deutschland;
25.06.2014
- 27.06.2014; in: "polymertec14",
(2014),
S. 55
- 61.
V. Archodoulaki, A. Laska, A. Ors Unsal, B. Duscher:
"Evaluation Of Structural Modification Of Conventional And Crosslinked Pe-Uhmw Acetabular Liners After In Vivo Use";
Poster: EUROMAT 2017,
THESSALONIKI;
17.09.2017
- 22.09.2017; in: "EUROMAT 2017",
EUROMAT 2017,
(2017),
Paper-Nr. F4-P-TUE-P1-5,
1 S.
V. Archodoulaki, S. Lüftl, T. Koch, S. Seidler, R. Stoiber:
"Correlation between molar mass and thermal/mechanical properties of polyoxymethylene (POM) copolymers";
Poster: 6th international conference on Modification, Stabilization and Degradation of Polymers,
Athen, Griechenland;
05.09.2010
- 09.09.2010; in: "MoDeSt2010, Athens, Greece, Proceedings",
MoDeSt Hellenic Organizing Committee,
(2010),
ISBN: 978-960-99362-0-0;
2 S.
V. Archodoulaki, S. Lüftl, S. Seidler:
"Effects of Processing, Ageing and Recycling on the Properties of Polyoxymethylene (POM)";
Poster: 8th Austrian Polymer Meeting,
Linz, Austria;
20.09.2006
- 22.09.2006; in: "8th Austrian Polymer Meeting. The Chain of Knowledge - From Catalyst to Application",
(2006),
S. 48.
V. Archodoulaki, S. Lüftl, S. Seidler:
"Influence of coloration on the thermal degredation behaviour of artificially aged Polyoxymethylene (POM)";
Poster: Third International Conference on Polymer Modification, Degradation and Stabilisation (MoDeSt 3),
Lyon, France;
29.08.2004
- 02.09.2004; in: "MoDeSt 3. Third International Conference on Polymer Modification, Degradation and Stabilisation",
(2004),
4 S.
V. Archodoulaki, S. Lüftl, S. Seidler:
"Photooxidative Degradation of Polyoxymethylene (POM)";
Poster: 11. Internationale Fachtagung Polymerwerkstoffe 2004,
Halle/Saale;
29.09.2004
- 01.10.2004; in: "Polymeric Materials 2004. Abstracts",
G. H. Michler (Hrg.);
(2004),
ISBN: 3-928466-68-2;
S. PI-73.
V. Archodoulaki, S. Lüftl, S. Seidler:
"Property changes of polyoxymethylene (POM) by means of processing, ageing and recycling";
Vortrag: Fourth International Conference on Polymer Modification, Degradation and Stabilization (M2o06 DeSt),
San Sebastian, Spain;
10.09.2006
- 14.09.2006; in: "Fourth International Conference on Polymer Modification, Degradation and Stabilization - Book of Abstracts",
(2006),
S. 93.
V. Archodoulaki, S. Lüftl, S. Seidler:
"Thermal-oxidative induced degradation behaviour of Polyoxymethylene (POM) copolymer detected by TGA/MS";
Vortrag: Third International Conference on Polymer Modification, Degradation and Stabilisation (MoDeSt 3),
Lyon, France;
29.08.2004
- 02.09.2004; in: "MoDeSt 3. Third International Conference on Polymer Modification, Degradation and Stabilisation",
(2004),
4 S.
V. Archodoulaki, S. Lüftl, M. Spitzbart, S. Seidler:
"Determination of Oxidation Induction Time and Oxidation Induction Temperature (OIT) for Polyoxymethylene";
Vortrag: 6th Austrian Polymer Meeting, Wien (Austria),
Wien (Austria);
15.09.2003
- 17.09.2003; in: "6th Austrian Polymer Meeting, Wien (Aurstria)",
Wien (Austria)
(2003),
S. 72.
V. Archodoulaki, S. Lüftl, M. Spitzbart, S. Seidler:
"What You Should Avoid in the Application of Polymer Thermal Analysis (A Day in a Thermoanalytic Laboratory)";
Poster: 6th Austrian Polymer Meeting, Wien (Austria),
Wien (Austria);
15.09.2003
- 17.09.2003; in: "6th Austrian Polymer Meeting, Wien (Austria)",
Wien (Austria)
(2003),
S. 167.
V. Archodoulaki, R. Markut-Kohl, T. Koch, S. Seidler:
"Characterisation of the fracture behaviour and determination of micro-hardness of medical grade ultra high molecular weight polyethylene (PE-UHMW)";
Vortrag: 6th international conference on Modification, Stabilization and Degradation of Polymers,
Athen, Griechenland;
05.09.2010
- 09.09.2010; in: "MoDeSt2010, Athens, Greece, Proceedings",
MoDeSt Hellenic Organizing Committee,
(2010),
ISBN: 978-960-99362-0-0;
2 S.
V. Archodoulaki, M. Merola, D. Kastanis, T. Koch, P. Carlone:
"Influence of the impregnation velocity on impregnation quality and mechanical properties of Vacuum Assisted Resin Transfer Moulding (VARTM) Materials";
Vortrag: 20. Symposium Verbundwerkstoffe und Werkstoffverbunde 2015,
Wien;
01.07.2015
- 03.07.2015; in: "20th Symposium on Composites",
C. Edtmaier, G. Requena (Hrg.);
Materials Science Forum,
Vol. 825-826
(2015),
ISBN: 978-3-03835-515-1;
S. 36
- 43.
H. Asanuma, P. Polcik, S. Kolozsvári, F. Klimashin, H. Riedl, P.H. Mayrhofer:
"Cerium doping of Ti-Al-N coatings for excellent thermal stability and oxidation resistance";
Vortrag: Plansee Seminar 2017,
Reutte;
29.05.2017
- 02.06.2017; in: "Plansee Seminar 2017",
(2017),
S. 50.
H. Asanuma, P. Polcik, S. Kolozsvári, F. Klimashin, H. Riedl, P.H. Mayrhofer:
"Cerium Doping of Ti-Al-N Coatings for Excellent Thermal Stability and Oxidation Resistance";
Poster: 44th International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego;
24.04.2017
- 28.04.2017; in: "ICMCTF 2017",
(2017).
H. Asanuma, P. Polcik, S. Kolozsvári, F. Klimashin, H. Riedl, P.H. Mayrhofer:
"Improved mechanical properties and thermal stability of Ti-Al-N through alloying with La-borides";
Vortrag: 45th International Conference on Metallurgical Coatings and Thin Films 2018,
San Diego, CA;
23.04.2018
- 27.04.2018; in: "Book of Abstracts 45th ICMCTF 2018",
(2018),
S. 9.
E. Aschauer, M. Bartosik, S. Kolozsvári, H. Bolvardi, H. Riedl, P.H. Mayrhofer:
"Stress evolution in high-temperature oxidation resistant Mo1-x-ySixBy/Ti1-xAlxN multilayer coatings";
Vortrag: Stress 2016,
Chicago;
02.10.2016
- 05.10.2016; in: "Stress Evolution in Thin Films and Coatings: from Fundamental Understanding to Control",
(2016),
S. 24.
E. Aschauer, H. Riedl, H. Bolvardi, P. Polcik, P.H. Mayrhofer:
"Influence of Ti on the Phase Stability of Magnetron Sputtered Mo-Si-B Thin Films";
Poster: 45th International Conference on Metallurgical Coatings and Thin Films (ICMCTF) 2018,
San Diego, CA;
23.04.2018
- 27.04.2018; in: "45th ICMCTF",
(2018),
S. 93
- 94.
Z. Asghar, G. Requena, H.P. Degischer:
"Improving the thermomechanical properties of cast Al-Si alloys by the addition of Ni and Fe aluminides";
Poster: Junior Scientist Conference JSC 2010,
Vienna, Austria;
07.04.2010
- 09.04.2010; in: "Junior Scientist Conference JSC 2010",
(2010),
ISBN: 978-3-200-01797-9;
S. 189
- 190.
Z. Asghar, G. Requena, H.P. Degischer, E. Boller:
"Influence of internal architectures of cast AlSi10Cu5Ni1-2 on high temperature strength";
Vortrag: The 12th International Conference on Aluminium Alloys,
Yokohama, Japan;
05.09.2010
- 09.09.2010; in: "ICAA 12",
(2010),
S. 1285
- 1290.
K. Aßmus, S. Binkowski, W. Hübner, D. Klaffke, S. Benemann, C. Neumann, A. Pyzalla, H. Pinto:
"Verformung und Gefügetransformation bei Schwingungsverschleiß von austenitischen FeCrNi-Legierungen";
Vortrag: 37. Metallographie-Tagung 2003,
Berlin (Deutschland);
17.09.2003
- 19.09.2003; in: "Fortschritte in der Metallographie. Sonderbände der Praktischen Metallographie 35",
Werkstoffinformationsgesellschaft,
Band 35
(2003),
ISBN: 3-88355-322-0;
S. 207
- 212.
K. Aßmus, W. Hübner, J. Bohse, H. Pinto, A. Pyzalla:
"Untersuchungsmethoden für die Austenitstabilität bei tribologischer Beanspruchung von FeCrNi-Legierungen";
Vortrag: 14. Kolloquium Schallemission,
Berlin-Adlershof;
27.03.2003
- 28.03.2003; in: "Statusberichte zur Entwicklung und Anwendung der Schallemissionsanalyse",
DGZfP-Deutsche Gesellschaft für Zerstörungsfreie Prüfung E.V.,
DGZFP-Berichtsband BB 82-CD
(2003),
ISBN: 3-931381-41-2;
S. 89
- 102.
K. Assmus, W. Hübner, A. Pyzalla, H. Pinto:
"Structure Transformations in CrNi Steels under Tribological Stressing at Low Temperatures";
Vortrag: 14th International Colloquium Tribology,
Ostfildern;
13.01.2004
- 15.01.2004; in: "Tribology and Lubrication Engineering, Volume 2",
W.J. Bartz (Hrg.);
Technische Akademie Esslingen,
(2004),
ISBN: 3-924813-54-x;
S. 1047
- 1054.
N. Babscan, D. Leitlmeier, H.P. Degischer, H. Flankl:
"Foamability of Particle Reinforced Aluminium Melts";
Vortrag: Eurofoam 2002,
Manchester;
07.07.2002
- 10.07.2002; in: "Eurofoam 2002 - Programme and Book of Abstracts",
(2002),
S. P47.
N. Babscan, D. Leitlmeier, H.P. Degischer, H. Flankl:
"Particle stabilised liquid-aluminium foams and the role of the oxide skin";
Vortrag: International Conference on Cellular Metals and Metal Foaming Technology,
Berlin, D;
23.06.2003
- 25.06.2003; in: "Cellular Metals: Manufacture properties applications",
J. Banhart, N. A. Fleck, A. Mortensen (Hrg.);
Verlag Metall Innovation Technologie MIT,
(2003),
ISBN: 3-935538-12-x;
S. 101
- 106.
B. Balluch, S. Lüftl, S. Seidler, W. Smetana:
"Binder Burnout Studies of LTCC Tapes by Means of Thermal Analyses";
Poster: International Conference of IMAPS Poland Chapter,
Pultusk, Poland;
21.09.2008
- 24.09.2008; in: "Abstracts Proceedings of the XXXII International Conference of IMAPS Poland Chapter",
(2008),
ISBN: 978-83-917701-6-0;
1 S.
P. Barriobero Vila:
"Phase transformation kinetics in Ti-10V-2Fe-3Al";
Vortrag: Slovak University of Technology in Bratislava,
Trnava;
15.11.2012
- 16.11.2012; in: "7th Seminar for Central European PhD Students",
P. Barriobero Vila (Hrg.);
(2012).
P. Barriobero Vila, F. Warchomicka, G. Requena, T. Buslaps:
"Phase transformation kinetics in a near-β titanium alloy";
Vortrag: HI Temp 2012,
Hamburg;
11.09.2012
- 13.09.2012; in: "HI TEMP 2012 Conference Proceedings",
P. Barriobero Vila (Hrg.);
(2012).
P. Barriobero Vila, F. Warchomicka, G. Requena, A. Stark, N. Schell, T. Buslaps, M. Stockinger:
"Influence of the initial microstructure on the phase transformation of Ti-10V-2Fe-3Al";
Poster: Deutsches Elektronen-Synchrotron-DESY,
Hamburg;
25.01.2012
- 27.01.2012; in: "European XFEL/HASYLAB User's Meeting 2012",
P. Barriobero Vila (Hrg.);
(2012),
S. 15.
M. Bartosik, R Hahn, M. Arndt, P. Polcik, P.H. Mayrhofer:
"Fracture toughness of Ti-Si-N nanocomposite thin films";
Vortrag: Plansee Seminar 2017,
Reutte;
29.05.2017
- 02.06.2017; in: ""19th Plansee Seminar 2017"",
Plansee Seminar 2017 Proceedings,
(2017),
Paper-Nr. HM 23,
8 S.
M. Bartosik, R Hahn, P.H. Mayrhofer:
"Mechanical properties of superlattice thin films";
Poster: 15th International Conference on Plasma Surface Engineering,
Garmisch-Partenkirchen;
12.09.2016
- 16.09.2016; in: "Book of Abstracts",
(2016),
S. 299.
M. Bartosik, D. Holec, M. Todt, F. G. Rammerstorfer, P.H. Mayrhofer:
"Thermal Expansion and Elasticity of Metastable Cubic B1-AlN";
Poster: 41st International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego, CA;
28.04.2014
- 02.05.2014; in: "Book of abstracts",
(2014).
M. Bartosik, J. Keckes, R. Daniel, C. Mitterer, M. Burghammer, L. Zhou, D. Holec, P.H. Mayrhofer:
"Cross-Sectional X-ray Nanodiffractionon a Graded Multiphase Cr-N Thin Film";
Vortrag: International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2013,
San Diego;
29.04.2013
- 03.05.2013; in: "Book of abstracts",
(2013).
M. Bartosik, R. Rachbauer, C. Krywka, J. Bernardi, J. Keckes, P.H. Mayrhofer:
"Synchrotron Nanodiffraction and X-TEM on Al-Ti-N based Hard Coatings with different Morphologies";
Vortrag: 41st International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego, CA;
28.04.2014
- 02.05.2014; in: "Book of abstracts",
(2014).
M. Bartosik, H. Riedl, C.M. Koller, P.H. Mayrhofer:
"Interface controlled properties of nanolayered thin films";
Vortrag: 43rd International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego (USA);
25.04.2016
- 29.04.2016; in: "Book of abstracts",
(2016),
S. 44.
M. Bartosik, M. Todt, H. Riedl, C.M. Koller, R. Rachbauer, H. J. Böhm, P.H. Mayrhofer:
"Thermo-mechanically Optimized Multilayer Thin Films";
Vortrag: 42nd International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego, CA;
20.04.2015
- 24.04.2015; in: "Book of abstracts",
(2015),
S. 82.
S. Baudis, D. Bomze, M. Lunzer, J. Stampfl, A. Ovsianikov, R. Liska:
"Poly(vinyl alcohol) based hydrogels for 3D biomaterial constructs";
Poster: 10th World Biomaterials Congress,
Montreal, Canada;
17.05.2016
- 22.05.2016; in: "Book of Abstracts",
(2016),
S. 2693.
S. Baudis, R. Gmeiner:
"3DFabBio - Maßgeschneiderte 3D gefertigte Produkte aus bio-basierten erneuerbaren Rohstoffen";
Vortrag: Stakeholderdialog: Biobased Industry,
Wien (eingeladen);
04.12.2017; in: "Stakeholderdialog: Biobased Industry",
(2017),
1 S.
S. Baudis, C. Grasl, H. Bergmeister, H. Schima, J. Stampfl, R. Liska:
"(Bio)abbaubare Urethan-Elastomere für Elektroversponnene Blutgefäßersatzmaterialien";
Poster: 4. Wiener Biomaterialsymposium: Von der Werkstoffentwicklung bis zur klinischen Anwendung,
TU Wien, Wien;
15.11.2010
- 17.11.2010; in: "Tagungsband",
(2010),
S. 7.
S. Baudis, F. Nehl, S. Ligon, H. Wutzel, A. Nigisch, H. Bergmeister, D. Bernhard, J. Stampfl, R. Liska:
"Urethane-based photoelastomers with defined cellular struchture for scaffold-based vascular tissue engineering";
Poster: UPAC 9th International Conference on Advanced Polymers via Macromolecular Engineering (APME 2011),
Cappadocia, TR;
05.09.2011
- 08.09.2011; in: "IUPAC 9th International Conference on Advanced Polymers via Macromolecular Engineering (APME 2011) - Program and Abstract Book",
(2011),
S. 148.
S. Baudis, A. Ovsianikov, J. Stampfl, R. Liska:
"3D Printed Biocompatible Polymers";
Vortrag: Danube Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017",
Book of Abstracts.com,
(2017),
ISBN: 978-3-9504017-6-9;
S. OP-30.
S. Baudis, M. Schuster, C. Heller, C. Turecek, F. Varga, H. Bergmeister, G. Weigel, J. Stampfl, R. Liska:
"Flexible, Biocompatible Photopolymers as Artificial Vascular Grafts";
Poster: 9th Austrian Polymer Meeting,
Graz, A;
26.03.2008
- 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts",
(2008),
S. 61.
S. Baudis, M. Schuster, C. Heller, C. Turecek, F. Varga, H. Bergmeister, G. Weigel, J. Stampfl, R. Liska:
"Flexible, biocompatible Photopolymers as Synthetic Vascular Replacement Materials";
Poster: RadTech Europe 2007 - Europe´s event for UV/EB curing, Vienna 13-15 Nov 2007,
Wien;
13.11.2007
- 15.11.2007; in: "RadTech Europe 2007 - Conference Proceedings",
(2007),
6 S.
S. Baudis, M. Schuster, C. Heller, C. Turecek, F. Varga, H. Bergmeister, G. Weigel, J. Stampfl, R. Liska:
"Photoelastomere als biokompatible Blutgefäßersatzmaterialien";
Poster: 3. Wiener Biomaterialsymposium,
Wien;
19.11.2008
- 21.11.2008; in: "3. Wiener Biomaterialsymposium - Tagungsband",
(2008),
S. 41.
S. Baudis, M. Schuster, C. Heller, C. Turecek, F. Varga, H. Bergmeister, G. Weigel, J. Stampfl, R. Liska:
"Tailored Photoelastomers as Biocompatible Blood Vessel Substitutes";
Poster: International Workshop on Biomacromolecules 2008,
Stockholm, S;
01.06.2008
- 04.06.2008; in: "International Workshop on Biomacromolecules 2008, Book of Abstracts",
(2008).
S. Baudis, M. Schuster, C. Turecek, H. Bergmeister, G. Weigel, J. Stampfl, F. Varga, R. Liska:
"Development of flexible biocompatible photopolymers as artificial vascular replacement materials";
Vortrag: XXXIV ESAO Congress,
Krems, A;
05.09.2007
- 08.09.2007; in: "The International Journal of Artificial Organs, Abstracts of the XXXIV ESAO Congress",
D. Falkenhagen (Hrg.);
The International Journal of Artificial Organs,
30 (8)
(2007),
ISSN: 0391-3988;
S. 705.
S. Baudis, M. Schwentenwein, T. Pulka, B. Steyrer, H. Wilhelm, G. Weigel, H. Bergmeister, J. Stampfl, R. Liska:
"Studies on the mechanical behaviour of Photoelastomers for Vascular Tissue Regeneration.";
Vortrag: RadTech Europe 2009,
Nizza, FR;
14.10.2009
- 15.10.2009; in: "Radtech Europe 2009, Proceedings",
(2009),
6 S.
S. Baudis, B. Steyrer, T. Pulka, H. Wilhelm, G. Weigel, H. Bergmeister, J. Stampfl, R. Liska:
"Photopolymerizable Elastomers for Vascular Tissue Regeneration";
Poster: EPF 2009, European Polymer Congress,
Graz, A;
12.07.2009
- 17.07.2009; in: "EPF'09, Book of Abstracts",
(2009),
S. 130.
S. Baudis, Z. Tomasikova, P. Knaack, X.H. Qin, J. Stampfl, A. Ovsianikov, R. Liska:
"A Thiol-Ene based Modular Material System with Hyaluronic Acid Building Blocks";
Poster: Photopolymerization Fundamentals 2015,
Boulder;
13.09.2015
- 16.09.2015; in: "Abstract USB",
(2015).
S. Baudis, Z. Tomasikova, E. Zerobin, X.H. Qin, P. Gruber, M. Markovic, J. Stampfl, A. Ovsianikov, R. Liska:
"Additive Manufactured, Biocompatible Hydrogels based on Hyaluronic Acid";
Poster: 10th World Biomaterials Congress,
Montreal, Canada;
17.05.2016
- 22.05.2016; in: "Book of Abstracts",
(2016),
S. 2728.
S. Baudis, Z. Tomasikova, E. Zerobin, X.H. Qin, M. Markovic, P. Gruber, J. Stampfl, A. Ovsianikov, R. Liska:
"Laser-microfabricated, biocompatible hydrogels based on hyaluronan";
Poster: TERMIS-EU 2016 conference,
Uppsala, Sweden;
28.06.2016
- 01.07.2016; in: "European Cells&Materials Journal",
European Cells&Materials Journal,
Vol. 31. Suppl. 1, 2016, page P454
(2016),
ISSN: 1473-2262;
S. 454.
S. Baudis, H. Wilhelm, H. Bergmeister, J. Stampfl, R. Liska:
"Additive Manufactured Photoelastomers as Tailor-made Biomaterials for Vascular Tissue Restoration";
Vortrag: European Symposium of Photopolymer Science,
Mulhouse, France;
28.11.2010
- 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book",
(2010).
S. Baudis, H. Wilhelm, H. Bergmeister, J. Stampfl, R. Liska:
"Generativ gefertigte Photoelastomere als maßgeschneiderte Biomaterialien für vaskuläre Geweberegeneration";
Vortrag: 4. Wiener Biomaterialsymposium,
Wien;
15.11.2010
- 17.11.2010; in: "Tagungsband",
J. Stampfl (Hrg.);
(2010),
S. 6.
S. Baudis, E. Zerobin, M. Lunzer, Z. Tomasikova, X.H. Qin, M. Markovic, P. Gruber, J. Stampfl, A. Ovsianikov, R. Liska:
"Microfabricated Biocompatible Hydrogels";
Vortrag: VSS 2017 - Vienna young Scientists Symposium,
Wien;
01.06.2017
- 02.06.2017; in: "VSS 2017",
(2017),
ISBN: 978-3-9504017-5-2;
S. 11.
S. Baudis, E. Zerobin, M. Lunzer, M. Tromayer, M. Markovic, P. Gruber, J. Stampfl, A. Ovsianikov, R. Liska:
"Controlling the Micro-Environment of Cells by Exploitation of Macromolecular Photochemistry";
Vortrag: 12th International Conference on Advanced Polymers via Macromolecular Engineering,
Ghent;
21.05.2017
- 25.05.2017; in: "Advanced Polymers via Macromolecular Engineering",
(2017),
S. 91.
S. Baudis, E. Zerobin, M. Lunzer, M. Tromayer, M. Markovic, P. Gruber, J. Stampfl, A. Ovsianikov, R. Liska:
"Macromolecular Photochemistry: A Toolbox to Control the Micro-Environment of Cells";
Vortrag: 17. Österreichische Chemietage 2017,
Salzburg;
25.09.2017
- 28.09.2017; in: "17. Österreichische Chemietage 2017",
(2017),
S. OP-29.
B. Bauer, G. Requena:
"Creep Resistance depending on Particle Reinforcement Size of Al-Alloys produced by Powder Metallurgy";
Vortrag: International Conference on Powder Metallurgy and Particulate Materials - POWDERMET2009,
Las Vegas - USA;
28.06.2009
- 01.07.2009; in: "International Conference on Powder Metallurgy and Particualte materials",
(2009),
ISBN: 978-0-9819496-1-1;
S. 1
- 13.
B. Bauer, G. Requena, M. Lieblich:
"Enhancement of Creep Resistance of Al-Alloys by Particle Reinforcement";
Vortrag: International Conference on Aluminium Alloys (ICAA11),
Aachen, Germany;
22.09.2008
- 28.09.2008; in: "Aluminium Alloys",
Wiley-VCH,
Volume 2
(2008),
ISBN: 978-3-527-32367-8;
S. 2251
- 2256.
S. Baumgartner, B. Busetti, M. Pfaffinger, J. Stampfl:
"Comparison of dynamic mask- and vector-based ceramic stereolithography";
Vortrag: 41st International Conference on Advanced Ceramics and Composites,
Daytona Beach, FL;
22.01.2017
- 27.01.2017; in: "Proceedings of the 41st International Conference on Advanced Ceramics and Composites",
Ceramic Engineering and Science Proceedings/ Wiley,
Volume 38, Issue 3
(2018),
ISBN: 9781119474746;
Paper-Nr. 16,
9 S.
S. Baumgartner, M. Pfaffinger, J. Stampfl:
"Lithography based additive manufacturing of structural and functional ceramics";
Vortrag: 6th International Congress on Ceramics,
Dresden;
21.08.2016
- 25.08.2016; in: "From Lab to Fab - Abstracts Lectures&Posters",
(2016),
S. 49.
S. Baumgartner, J.-A. Schönherr, A. Schedle, J. Stampfl:
"Precision of Stereolithography-based additive manufactured ceramic parts";
Vortrag: 6th International Conference on Additive Technologies iCAT 2016,
Nürnberg;
29.11.2016
- 30.11.2016; in: "6th International Conference on Additive Technologies iCAT 2016",
(2016),
S. 412
- 414.
S. Baumgartner, J. Stampfl:
"Digital Materials: A Hybrid 3d-Printing System";
Vortrag: Vienna Young Scientists Symposium VSS 2018,
Wien;
07.06.2018
- 08.06.2018; in: "Proceedings VSS 2018",
(2018),
ISBN: 978-3-9504017-8-3;
S. 78
- 79.
S. Benedikt, J. Wang, M. Markovic, N. Moszner, K. Dietliker, A. Ovsianikov, H. Grützmacher, K. Hölzl, R. Liska:
"Highly Efficient Cleavable Photoinitiators for Visible Light curing of Aqueous Formulations";
Vortrag: RadTech Europe 2015 Conference,
Prague;
13.10.2015
- 15.10.2015; in: "Abstract Book",
(2015),
S. 18.
A Berg, Markus Pfleger, T. Koch, J. Stampfl:
"Erfassung mechanischer Eigenschaften von Kunststoff-Materialien für den Medizinischen Einsatz mit Methoden der Magnetresonanzbildgebeung";
Poster: 3. Wiener Biomaterialsymposium,
Wien;
19.11.2008
- 21.11.2008; in: "3. Wiener Biomaterialsymposium, Tagungsband",
(2008),
ISBN: 978-3-200-01613-2;
S. 43.
A. Berg, B. Koch, A. Hochwallner, J. Stampfl, C. Grasl, F. Moscato:
"Magnetic resonance microscopy for the non-destructive analysis of polymer micro structures produced using additive manufacturing";
Vortrag: Microscopy Conference 2021,
Wien;
22.08.2021
- 26.08.2021; in: "Microscopy Conference 2021",
(2021),
S. 413
- 414.
U. Beyer, I. Neubauer, J. Kreyca, E. Kozeschnik:
"Virtual Joining Factory - Integration of microstructure evolution in the manufacturing process chain simulation";
Vortrag: 18th International ESAFORM Conference on Material Forming,
Graz;
15.04.2015
- 17.04.2015; in: "Material Forming ESAFORM 2015",
(2015),
S. 1325
- 1330.
U. Beyer, M. Rath, E. Kozeschnik:
"Virtuelle Fabrik - Integration von Mikrostruktureigenschaften in die Umformsimulation zur Herstellung von Werkstoffverbunden";
Vortrag: MEFORM 2014,
Altenberg;
26.03.2014
- 27.03.2014; in: "MEFORM 2014: Production and Processing of Cladded Materials and Metal Matrix Composites",
TU Bergakad.,
(2014),
ISBN: 9783860124819;
S. 70
- 80.
H. Birkedal, C. Broomell, R. Khan, N. Slack, H. Lichtenegger, F. Zok, G. D. Stucky, J.H. Waite:
"The Jaws of Nereis: Microstructure and Mechanical Properties";
Vortrag: 2005 MRS Spring Meeting,
San Francisco, USA;
28.03.2005
- 01.04.2005; in: "Structure and Mechanical Behavior of Biological Materials (Mater. Res. Soc. Symp. Proc. 874, Warrendale, PA, 2005)",
P. Fratzl et al. (Hrg.);
paper L2.8-K2.8
(2005).
F. Bleicher, C. Lechner, Ch. Habersohn, E. Kozeschnik, B. Adjassoho, H. Kaminski:
"Mechanism of surface modification using machine hammer peening technology";
Vortrag: CIRP - 62nd General Assembly,
Hong Kong (eingeladen);
19.08.2012
- 25.08.2012; in: "CIRP Annals-Manufacturing Technology",
CIRP Annals-Manufacturing Technology,
61
(2012),
ISSN: 0007-8506;
S. 375
- 378.
D. Bomze, B. Husar, P. Gruber, M. Markovic, A. Ovsianikov, R. Liska:
"Modified Poly(Vinyl Alcohol) based Hydrogels for Tissue Engineering via Thiol-Ene-Crosslinking";
Poster: Photopolymerization Fundamentals 2015,
Boulder;
13.09.2015
- 16.09.2015; in: "Abstract USB",
(2015).
D. Bomze, B. Husar, P. Gruber, M. Markovic, A. Ovsianikov, R. Liska:
"Norbornen Modified Poly(vinyl Alcohol) Based Hydrogels For Tissue Engineering Via Thiol-Ene Crosslinking";
Poster: ESPS 2014,
Vienna;
09.09.2014
- 12.09.2014; in: "3rd European Symposium of Photopolymer Science",
(2014),
S. 147.
D. Bomze, B. Husar, M. Markovic, A. Ovsianikov, R. Liska:
"Novel Low-Toxic Poly(vinyl Alcohol) Based Hydrogels For Tissue Engineering Via Thiol-Ene Crosslinking";
Vortrag: ESPS 2014,
Vienna;
09.09.2014
- 12.09.2014; in: "3rd European Symposium of Photopolymer Science",
(2014),
ISBN: 978-3-9502992-9-8;
S. 132.
D. Bomze, B. Husar, M. Markovic, A. Ovsianikov, R. Liska:
"Novel low-toxic poly(vinyl alcohol) based hydrogels for tissue engineering via thiol-ene crosslinking";
Vortrag: 5th Bratislava Young Polymer Scientists Workshop BYPoS,
Zázrivá;
16.06.2014
- 20.06.2014; in: "BYPoS workshop book",
book of abstracts,
(2014),
ISBN: 978-80-970923-5-1;
S. 57.
M. Bonta, A. Cakara, P.H. Mayrhofer, A. Limbeck:
"Quantitative analysis of Mo, Si and B in oxidation resistant coatings";
Vortrag: 18. Tagung Festkörperanalytik,
Wien;
06.07.2015
- 08.07.2015; in: "Kurzfassungen",
(2015),
S. 51.
S. Brkic, E. Bovo, P. Gruber, M. Markovic, O. Doriana, T. Flora, M. Asthana, G. Roberto, P. Abhay, J. Rodriguez-Cabello, R. Liska, A. Ovsianikov, A. Banfi:
"Photo-grafting of VEGF protein gradients into elastin-like polymer hydrogels for improved vascularization";
Vortrag: TERMIS-EU 2017: Personalised Therapies for Regenerative Medicine,
Davos;
26.06.2017
- 30.06.2017; in: "eCM Meeting Abstracts 2017, Collection 2; TERMIS-EU 2017 Conference",
eCM Conferences Open Access online periodical,
(2017),
ISSN: 2522-235x;
Paper-Nr. 0141,
1 S.
G. Bruno, H. Pinto:
"The kinetics of the γ´-phase and its strain in the Nickel Base Superalloy SC16 studied by in-situ neutron and synchrotron radiation diffraction";
Vortrag: 10th International Symposium on Superalloys,
Seven Springs Mountain Resort, Pennsylvania, USA;
19.09.2004
- 23.09.2004; in: "Superalloys 2004",
TMS,
(2004),
ISBN: 0-87339-576-x;
S. 837
- 846.
H. Buken, P. Sherstnev, E. Kozeschnik:
"Modeling The Interaction Between Precipitation And Static Recrystallization In Micro-Alloyed Steel";
Hauptvortrag: PTM 2015 Solid-Solid Phase Transformation in Inorganic Materials,
Whistler (eingeladen);
28.06.2015
- 03.07.2015; in: "Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015",
(2015),
ISBN: 978-0-692-43736-0;
S. 913
- 914.
H. Buken, S. Zamberger, E. Kozeschnik:
"A model for the influence of micro-alloying elements on static recrystallization of austenite";
Vortrag: 6th International Conference on Recrystallization and Grain Growth,
Pittsburgh, USA;
17.07.2016
- 21.07.2016; in: "Proceedings of the 6th International Conference on Recrystallization and Grain Growth (ReX&GG 2016)",
E. Holm, S. Farjami, P. Manohar, G. Rohrer, A Rollett, D. Srolovitz, H. Weiland (Hrg.);
Wiley,
(2017),
ISBN: 978-1-119-32879-7;
S. 113
- 118.
P Burgholzer, C Hofer, B Reitinger, G. Paltauf, A. Mohammed, H.P. Degischer, D Loidl, P. Schulz:
"Laser Ultrasonics for Non-Destructive Evaluation of Metal Matrix Composites";
Vortrag: 16th World Conference on Nondestructive Testing,
Montreal, Kanada;
30.08.2004
- 03.09.2004; in: "Proc. 16.World Conference on NDT",
(2004),
Paper-Nr. TS3.13.2,
8 S.
B. Busetti, B. Lutzer, J. Stampfl:
"Development of a hybrid exposure system for lithography-based additive manufacturing technologies";
Vortrag: SPIE Photonics West - LASE,
San Francisco;
27.01.2018
- 01.02.2018; in: "SPIE Proceedings Vol. 10523: Laser 3D Manufacturing V",
SPIE Digital Library,
1052305
(2018),
ISBN: 9781510615311;
S. 1
- 13.
A. Cakara, M. Bonta, P.H. Mayrhofer, A. Limbeck:
"Development of a LA-ICP-MS method for the quantitative analysis of Mo, Si and B in oxidation resistant coatings";
Poster: 2015 Euopean Winter Conference on Plasma Spectrochemistry,
Münster, Germany;
22.02.2015
- 26.02.2015; in: "Book of Abstracts",
(2015),
1 S.
D. Canelo Yubero, G. Requena, H.P. Degischer, T. Buslaps:
"In situ study of internal stresses during thermal cycling of particle and short fibre reinforced aluminium alloys";
Vortrag: 18. DGM Symposium Verbundwerkstoffe und Werkstoffverbunde,
Chemnitz;
30.03.2011
- 01.04.2011; in: "18. Symposium Verbundwerkstoffe und Werkstoffverbunde in Chemnitz 2011",
Eigenverlag, Chemnitz,
Band 41
(2011),
ISBN: 978-3-00-033801-4;
S. 26
- 32.
D. Canelo Yubero, G. Requena, C. Poletti, F. Warchomicka, H.P. Degischer:
"Load partition and microstructural evolution during hot deformation of Ti-alloys";
Vortrag: Euromat 2011,
Montpellier;
12.09.2011
- 15.09.2011; in: "European Congress on Advanced Materials and Processes",
(2011),
Paper-Nr. D11-O-2-4,
1 S.
V. Chawla, J. Wheeler, J Zechner, H. Riedl, P.H. Mayrhofer, I. Utke, J. Michler:
"High temperature mechanical behaviour of epitaxial TiN/AlN nanomultilayers";
Vortrag: 14th International Conference on Plasma Surface Engineering,
Garmisch-Partenkirchen;
15.09.2014
- 19.09.2014; in: "Book of Abstracts",
(2014),
S. 97.
K. Cicha, Z. Li, A. Mautner, K. Stadlmann, J. Torgersen, N.U Pucher, R. Markut-Kohl, R. Liska, J. Stampfl:
"Fabrication and evaluation of 3D-micro-structures produced using two-photon-induced photopolymerization (TPIP or 2PP) by means of optical assessment and FTIR-spectroscopy";
Vortrag: Euromat 2011,
Montpellier, France;
12.09.2011
- 15.09.2011; in: "Conference Proceeding Euromat 2011",
(2011),
S. 0453.
R. Coppeta, H. Ceric, D. Holec, T. Grasser:
"Critical thickness for GaN thin film on AlN substrate";
Vortrag: IEEE International Reliability Workshop (IIRW),
South Lake Tahoe, USA;
13.10.2013
- 17.10.2013; in: "Final Report of the IEEE International Integrated Reliability Workshop (IIRW)",
(2013),
ISBN: 978-1-4799-0350-4;
S. 133
- 136.
M.J. Cordill, J. Berger, V. Maier, J. Paulitsch:
"Effect of Deposition on the Mechanical Behavior of Cr films on Polyimde";
Vortrag: Materials Science & Technology 2013,
Montreal;
27.10.2013
- 31.10.2013; in: "Book of Abstracts",
(2013),
ISBN: 978-0-87339-762-9.
E. Cornelis, H.P. Degischer, B. Kriszt, A. Kottar:
"Microtomographic Investigation of Ti-rich Particles in AlSi1 Foam ";
Poster: EMC 2004 - 13th European Microscopy Congress,
Antwerpen (Belgien);
22.08.2004
- 27.08.2004; in: "EMC 2004 - 13th European Microscopy Congress. Proceedings (CD)",
(2004),
2 S.
E. Cornelis, A. Kottar, H.P. Degischer:
"Charakterisierung kohlenstofffaserverstärkter Metalle und Polymere mittels Röntgen-Computertomographie";
Vortrag: 15. DGM-Symposium Verbundwerkstoffe und Werkstoffverbunde,
Kassel (Germany);
06.04.2005
- 08.04.2005; in: "Verbundwerkstoffe und Werkstoffverbunde",
M. Schlimmer (Hrg.);
(2005),
ISBN: 3-88355-340-9;
S. 415
- 420.
E. Cornelis, A. Kottar, H.P. Degischer:
"X-Ray Computed Tomography characterising Carbon Fibre Reinforced Composites";
Vortrag: 11th European Conference on Composite Materials (ECCM11),
Rhodes (Greece);
31.05.2004
- 03.06.2004; in: "ECCM11. Proceedings (CD)",
ESCM European Society for Composite Materials,
(2004),
Paper-Nr. C036,
11 S.
E. Cornelis, A. Kottar, A. Mohammed, H.P. Degischer:
"X-Ray Computed Tomography characterising Carbon Fibre Reinforced Composites";
Vortrag: 14th International Conference on Composite Materials (ICCM-14),
San Diego, California USA;
14.07.2003
- 18.07.2003; in: "ICCM-14 ",
(2003),
ISBN: 0-87263-685-2;
10 S.
J. Crespo Casanova, H.P. Degischer, C. Landron, E. Maire, K. Track, B. Harrer:
"In-situ Zugversuche an Sphärogussproben im Synchrotron-Strahl";
Vortrag: Industrielle Computertomografie Tagung,
Wels;
27.09.2010
- 29.09.2010; in: "Proceedings - Industrielle Computertomografie",
(2010),
ISBN: 978-3-8322-9418-2;
S. 101
- 105.
J. Crespo Casanova, H.P. Degischer, K. Track, E. Maire, C. Landron, B. Harrer:
"Rissfortschritt in Sphäroguss mit unterschiedlicher Graphitverteilung bei in-situ Zugversuchen im Synchrotron-Strahl";
Vortrag: 45. Metallographie Tagung 2011,
Karlsruhe;
13.09.2011
- 16.09.2011; in: "Sonderbände der Praktischen Metallografie",
(2011),
ISBN: 978-3-88355-387-0;
S. 147
- 152.
J. Crespo Casanova, H.P. Degischer, K. Track, E. Maire, C. Landron, B. Harrer:
"Rissfortschritt in Sphärogussproben bei in-situ Zugversuchen im Synchrotron-Strah";
Vortrag: DGM Werkstoffprüfungtagung 2010,
Neu-Ulm;
02.12.2010
- 03.12.2010; in: "DGM Tagung Werkstoffprüfung 2010",
(2010),
ISBN: 9783514007789;
S. 191
- 195.
V. Dalbauer, C.M. Koller, J. Ramm, S. Kolozsvári, P.H. Mayrhofer:
"Phase Formation of Cathodic Arc Evaporated AlxCr1-x and AlxCr1-xOδ Thin Films";
Vortrag: AVS 63rd Symposium & Exhibition,
Nashville, TN, USA;
06.11.2016
- 11.11.2016; in: "Book of Abstracts",
(2016),
S. 125.
V. Dalbauer, J. Ramm, S. Koloszvári, C.M. Koller, P.H. Mayrhofer:
"Adjusting the Oxidation Behaviour of arc evaporated Al1-xCrx Intermetallics and Substoichiometric Oxides";
Poster: 45th International Conference on Metallurgical Coatings and Thin Films (ICMCTF) 2018,
San Diego, CA;
23.04.2018
- 27.04.2018; in: "45th ICMCTF",
(2018),
S. 108.
V. Dalbauer, J. Ramm, S. Koloszvári, C.M. Koller, P.H. Mayrhofer:
"On the Thermal Stability of cathodic arc evaporated (Al1-xCrx)2O3 thin films";
Vortrag: 45th International Conference on Metallurgical Coatings and Thin Films (ICMCTF) 2018,
San Diego, CA;
23.04.2018
- 27.04.2018; in: "45th ICMCTF",
(2018),
S. 68.
H.P. Degischer:
"Heterogene Metalle - ultraleicht und meganano";
Vortrag: 3. Ranshofener Leichtmetalltage 2004,
Geinberg (Österreich) (eingeladen);
23.06.2004
- 25.06.2004; in: "Vom Werkstoff zum Bauteilsystem - 3. Ranshofener Leichtmetalltage",
H. Kaufmann, P. Uggowither (Hrg.);
LKR Verlag,
(2004),
ISBN: 3-902092-02-5;
S. 183
- 195.
H.P. Degischer:
"Heterogeneous Metals Designed for Structural Applications";
Vortrag: International Conference Advanced Metallic Materials,
Smolenice Castle, SK;
05.11.2003
- 07.11.2003; in: "Proceedings of the International Conference Advanced Metallic Materials",
J. Jerz, P. Sebo, M. Zemankova (Hrg.);
Institute of Materials & Machine Mechanics,
(2003),
ISBN: 80-969011-7-6;
S. 40
- 47.
H.P. Degischer:
"Heterogeneous metals designed for strucural applications";
Vortrag: International Conference Advanced Metallic Materials 2003,
Smolenice Castle (Slovakia);
05.11.2003
- 07.11.2003; in: "Advanced Metallic Materials",
J. Jerz, P. Sebo, M. Zemankova (Hrg.);
(2003),
ISBN: 80-969011-7-6;
S. 40
- 47.
H.P. Degischer:
"Modernes Werkstoffangebot";
Vortrag: ALWS-Austrian Light Weight Structures, Seminar Leichtbau, 12./13.April 2007,
Ranshofen;
12.04.2007
- 13.04.2007; in: "Leichtbau: Prinzipien, Werkstoffauswahl und Fertigungsvarianten (Seminarunterlagen)",
Kapitel 2
(2007).
H.P. Degischer:
"Schaumstabilisierung bei Metallen";
Vortrag: DECHEMA/VCI-GVC-Symposium: Schäume - Grundlagen und Anwendungen,
Baden-Baden (Deutschland) (eingeladen);
16.11.2004
- 17.11.2004; in: "DECHEMA/VCI-GVC-Symposium: Schäume - Grundlagen und Anwendungen. Tagungsband",
DECHEMA,
(2004),
S. 25.
H.P. Degischer, M. Hersam et al.:
"Applications: High-performance structural materials";
Vortrag: US - EU Workshop on Long-term Impacts and Future Opportunities for Nanotechnology,
Hamburg;
23.06.2010
- 24.06.2010; in: "International Study of the Long-term Impacts and Future Opportunities for Nanoscale Science and Engineering",
(2010),
17 S.
H.P. Degischer, T. Huber, T. Schmitt, G. Lefranc:
"Metallmatrix-Verbundwerkstoffe für Kühlplatten in der Leistungselektronik";
Vortrag: Forum für Metallurgie und Werkstofftechnik,
Leoben (Österreich);
18.05.2004
- 19.05.2004; in: "Tagungsunterlagen Forum für Metallurgie und Werkstofftechnik",
ASMET The Austrian Society for Metallurgy and Materials,
Leoben
(2004),
S. 40
- 41.
H.P. Degischer, H. Knoblich, J. Knoblich, E. Maire, L. Salvo, M. Suery:
"Solidification Structures in Cast Al-Mg-Si Alloys";
Vortrag: 12. Internationale Metallographie-Tagung,
Leoben, Österreich;
27.09.2006
- 29.09.2006; in: "Fortschritte in der Metallographie. Sonderbände der Praktischen Metallographie",
Band 38
(2006),
S. 67
- 74.
H.P. Degischer, A. Kottar, E. Cornelis:
"Quantitative, Multi-Scale 3D-Characterisation of Heterogeneous Metallic Materials by X-Ray Computed Tomography";
Vortrag: FH Science Day, FH Oberösterreich,
Steyr (Österreich) (eingeladen);
20.09.2005; in: "Proceedings FH Science Day",
(2005),
ISBN: 3-8322-4400-x;
S. 181
- 188.
H.P. Degischer, A. Kottar, B. Foroughi, E. Maire, N. Godin, R. Florek:
"Testing and Simulation of Tensile Deformation of Foamed AlSi10 with Skin";
Vortrag: International Conference on Aluminium Alloys (ICAA11),
Aachen, Germany;
22.09.2008
- 28.09.2008; in: "Aluminium Alloys",
Wiley-Vch Gmbh,
Volume 2
(2008),
ISBN: 978-3-527-32367-8;
S. 2207
- 2214.
H.P. Degischer, F. Lasagni, C. Poletti, T. Huber:
"Microstructural instabilities revealed by dilatometry";
Hauptvortrag: 2nd International Ligth Metals Technology Conference 2005,
St. Wolfgang, Austria (eingeladen);
08.06.2005
- 10.06.2005; in: "Proceedings of the 2nd International Light Metals Technology Conference 2005",
H. Kaufmann (Hrg.);
(2005),
ISBN: 3-902092-03-3;
S. 27
- 32.
H.P. Degischer, F. Lasagni, M. Schöbel, T. Huber, M. Aly:
"Thermal Expansion of Aluminum and Magnesium Matrix Composites";
Vortrag: International Conf. on Advanced Materials and Composites (ICAMC 2007),
Thiruvananthapuram, India (eingeladen);
24.10.2007
- 26.10.2007; in: "Int.Conf.on Advanced Materials and Composites - ICAMC 2007 Proceedings",
(2007),
Paper-Nr. I-1,
11 S.
H.P. Degischer, F. Lasagni, M. Schöbel, T. Huber, M. Aly, G. Requena:
"Thermal Expansion of Aluminum and Magnesium Matrix Composites";
Vortrag: 16th International Conference on Composite Materials,
Kyoto, Japan;
09.07.2007
- 12.07.2007; in: "Proceedings of the 16th International Conference on Composite Materials",
(2007),
S. 1
- 2.
H.P. Degischer, F. Lasagni, M. Suery, L. Salvo, E. Maire:
"3D-Visualisation of the Phases in Cast Al-Mg-Si Alloys";
Vortrag: Journées Annuelles de la SF2M 2007,
Saint Etienne/France (eingeladen);
30.05.2007
- 01.06.2007; in: "Journées Annuelles de la SF2M 2007 - Programme et Résumés étendus des Communications",
(2007).
H.P. Degischer, F. Lasagni, D. Tolnai:
"3D-Visualisierung eutektischer Gefüge in einer AlMg5Si8 Legierung";
Vortrag: Industrielle Computertomographie Tagung,
Wels/OÖ;
27.02.2008
- 28.02.2008; in: "Proceedings - Industrielle Computertomographie",
Shaker Verlag GmbH, Aachen,
(2008),
ISBN: 978-3-8322-6949-4;
S. 97
- 101.
H.P. Degischer, F. Lasagni, D. Tolnai, A. Lasagni, F. Mücklich, E. Boller:
"3D Study of the Eutectics in Al-Si and Al-Si-Mg Alloys";
Vortrag: International Conference on Aluminium Alloys (ICAA11),
Aachen, Germany;
22.09.2008
- 28.09.2008; in: "Aluminium Alloys",
Wiley-VCH,
Volume 1
(2008),
ISBN: 978-3-527-32367-8;
S. 757
- 762.
S. Dieter, A. Pyzalla, B. Seemann, N. Wanderka, J. McCord, W. Reimers:
"Correleation of Microstructure and Magnetic Properties of CoFe single and CoFe/SiO{2}- mulitlayers";
Poster: 11. Jahrestagung der Deutschen Gesellschaft für Kristallographie (DGK),
Berlin;
10.03.2003
- 15.03.2003; in: "Humboldt-Universität zu Berlin 11. Jahrestagung der Deutschen Gesellschaft für Kristallographie (DGK) vom 10. bis 13. März 2003 in Berlin",
Oldenbourg Verlag,
München
(2003),
S. 95.
A. Dobos:
"On-Chip 3D Printing of a Blood-Brain Barrier Mode";
Vortrag: International Conference on Biofabrication (Biofabrication 2019),
Columbus, Ohio, USA;
20.10.2019
- 22.10.2019; in: "Abstract Book",
(2019).
A. Dobos, P. Gruber, W. Steiger, G. Fülöp, E. Sevcsik, G. Schütz, A. Ovsianikov:
"High resolution 3D printing of biomimetic microenvironments to study T-cell activation";
Vortrag: 682. WE-Heraeus-Seminar,
Heraeus;
25.08.2018
- 28.08.2018; in: "Abstract Book",
G. Fülöp (Hrg.);
(2018),
S. ##.
A. Dobos, P. Gruber, M. Tromayer, W. Steiger, J. Van Hoorick, S. van Vlierberghe, R. Liska, A. Ovsianikov:
"Laser-based 3D printing of hydrogels: a versatille appoach for accurate 3D cellular modles";
Vortrag: TERMIS World Congress 2018,
Kyoto;
04.09.2018
- 07.09.2018; in: "Abstract Book",
(2018),
S. 261.
A. Dobos, P. Gruber, J. Van Hoorick, S. Muehleder, W Holnthoner, S. van Vlierberghe, A. Ovsianikov:
"On-Chip Two Photon Polymerization of Vasculatr Structures";
Vortrag: The International Conference on Biofabrication 2018,
Würzburg;
28.10.2018
- 31.10.2018; in: "The International Conference on Biofabrication 2018",
Abstract book,
(2018),
S. O38.
A. Dobos, M. Tromayer, P. Gruber, J. Van Hoorick, S. van Vlierberghe, P. Dubruel, R. Liska, A. Ovsianikov:
"Comparason of the effect of photoinitiator P2CK and AS7 on the Viablitiy of Encapsulated Human Adipose-Derivet Stem Cells via Two-Photon Polymerization";
Poster: Donau Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Donau Vltava Sava Polymer Meeting 2017",
Book of Abstract,
(2017),
S. PO-5.
A. Dobos, J. Van Hoorick, P. Gruber, W. Steiger, S. Van Vlierberghe, A. Ovsianikov:
"Laser-based 3D printing of cell-containing thiol-ene hydrogels";
Vortrag: 30th Annual Conference of the European Society for Biomaterials,
Dresden;
09.09.2019
- 13.09.2019; in: "ESB 2019 Abstract Booklets",
(2019),
S. 1113.
M. Dolezal, S. Seidler, H.P. Degischer:
"Mechanical Damping Performance of Different Materials";
Vortrag: Materials Week 2002,
München;
30.09.2002
- 02.10.2002; in: "Materials Week 2002",
Werkstoff-Informationsges.m.b.H.,
Frankfurt
(2002),
ISBN: 3-88355-314-x.
P. Dorfinger:
"Toughening of Photopolymers with Core-Shell Particles for Stereolithography";
Poster: 4th European Symposium of Photopolymer Science,
Leipzig;
11.09.2016
- 14.09.2016; in: "4th European Symposium of Photopolymer Science ESPS 2016",
P. Dorfinger, R. Liska, J. Stampfl (Hrg.);
(2016),
S. P49.
P. Dorfinger, R. Liska, J. Stampfl:
"Toughening of Photopolymers for SLA";
Vortrag: 20. Symposium Verbundwerkstoffe und Werkstoffverbunde 2015,
Wien;
01.07.2015
- 03.07.2015; in: "20th Symposium on Composites",
Materials Science Forum,
Volumes 825-826
(2015),
ISBN: 978-3-03835-515-1;
S. 53
- 59.
P. Dorfinger, J. Stampfl, R. Liska:
"Toughening Of Photopolymers For Stereolithography (sl)";
Poster: 3rd European Symposium of Photopolymer Science,
Vienna;
09.09.2014
- 12.09.2014; in: "3rd European Symposium of Photopolymer Science",
ESPS 2014,
1
(2014),
ISBN: 978-3-9502992-9-8;
S. 25
- 26.
B. Duscher, V. Archodoulaki, A. Laska, S. Seichter, A. Örs Ünsal:
"Bestimmung struktureller Änderungen in Hüftgelenkinlays aus konventionellem und vernetztem PE-UHMW nach in vivo-Gebrauch";
Poster: Tagung Werkstoffprüfung 2015,
Bad Neuenahr;
02.12.2015
- 04.12.2015; in: "Fortschritte in der Werkstoffprüfung für Forschung und Praxis",
Verlag Stahleisen,
Düsseldorf
(2015),
ISBN: 978-3-514-00816-8;
S. 285
- 290.
B. Duscher, A. Schausberger:
"Influence of processing on blends of linear and long-chain branched polypropylene and its reversibility";
Poster: Polychar 22,
Stellenbosch;
08.04.2014
- 11.04.2014; in: "Polychar 22",
(2014).
B. Duscher, A. Schausberger:
"Influence of processing on the flow properties of long-chain branched polypropylene blends and its reversibilty";
Vortrag: Internationale wissenschaftliche Tagung Polymerwerkstoffe, Polymertec 2014,
Merseburg;
25.06.2014
- 27.06.2014; in: "Internationale wissenschaftliche Tagung, Polymertec 2014",
(2014),
195 S.
C. Dworak, T. Koch, F. Varga, R. Liska:
"Biocompatible phosphorus-containing Polymers for Radical Photopolymerization";
Vortrag: 10th Austrian Polymer Meeting and 2nd Joint Austrian-Slovenian Polymer Meeting 2010,
Leoben;
08.09.2010
- 10.09.2010; in: "Book of Abstracts",
(2010),
S. 76
- 77.
C. Dworak, T. Koch, F. Varga, R. Liska:
"Biocompatible phosphorus-containing Polymers for Radical Photopolymerization";
Poster: European Symposium of Photopolymer Science,
Mulhouse, France;
28.11.2010
- 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book",
(2010).
G Eder, Y Voronko, M Knausz, G Oreski, T. Koch, K Berger:
"Correlation of the loss in PV module performance with the charcteristics and ageing behaviour of the used backsheets";
Vortrag: 29th European Photovoltaic Solar Energy Conference and Exhibition,
Amsterdam;
22.09.2014
- 26.09.2014; in: "EU PVSEC Proceedings",
(2014),
ISBN: 3-936338-34-5;
Paper-Nr. 5DO.10.4.
K. Ehrmann, K. Seidler, P. Potzmann, C. Dworak, T. Koch, H. Bergmeister, C. Grasl, H. Schima, R. Liska, B. Podesser, S. Baudis:
"Thermopastic Polyurethanes and their Application as Electrospun Biodegradable Soft Tissue Medical Prosthesis";
Vortrag: VSS 2018 - Vienna Young Scientists Symposium,
Wien;
07.06.2018
- 08.06.2018; in: "VSS 2018",
Book-of-Abstracts.com,
(2018),
ISBN: 978-3-9504017-8-3;
S. 110
- 111.
P. Esfandiari, L. Spoljaric-Lukacic, T. Koch, A. Limbeck, W.S.M. Werner, S. Knaus:
"Surface Photografting and Metalization of Polypropylene";
Poster: RadTech Europe 2007 - Europe´s event for UV/EB curing, Vienna 13-15 Nov 2007,
Wien;
13.11.2007
- 15.11.2007; in: "Conference Proceedings",
(2007),
7 S.
P. Estermann, J. Six, S. Ilie, E. Kozeschnik:
"Simulation and validation of the mechanism responsible for the right flank of the second ductility minimum";
Vortrag: 10th ECCC European Conference on Continuous Casting,
Bari, Italien;
20.10.2021
- 22.10.2021; in: "proceedings of the 10th european conference on continuous casting",
(2021),
10 S.
H. Euchner:
"Tetrahedron dynamics in Tsai-type quasicrystals and their approximants";
Hauptvortrag: 12th International Conference on Quasicrystals,
Krakau (eingeladen);
01.09.2013
- 06.09.2013; in: "Book of abstracts",
(2013).
A. Falahati, M. Ahmadi, P. Lang, E. Povoden-Karadeniz, P. Warczok, E. Kozeschnik:
"Thermo-kinetic computer simulation of precipitation and age-hardening effect in Al-Mg-Si alloys with arbitrary heat treatment";
Hauptvortrag: Materials Science and Technology 2011,
Columbus, Ohio, USA;
17.10.2010
- 21.10.2010; in: "MS&T´11",
(2011),
ISBN: 978-0-87339-758-2;
8 S.
A. Falahati, M. Kumar, M. Just:
"Prediction of yield strength at room temperature for squeeze cast A226";
Vortrag: ICAA14,
Trondheim, Norway;
15.06.2014
- 19.06.2014; in: "Prediction of yield strength at room temperature for squeeze cast A226",
Trans Tech Publications Ltd,
794-796 Switzerland
(2014),
ISSN: 0255-5476;
S. 658
- 663.
A. Falahati, P. Lang, E. Kozeschnik:
"Precipitation in Al-alloy 6016 - the role of excess vacancies";
Vortrag: THERMEC´2011,
Quebec, Canada;
01.08.2011
- 05.08.2011; in: "THERMEC 2011",
Materials Science Forum,
Vol. 706 - 709
(2011),
ISSN: 1662-9752;
S. 317
- 322.
A. Falahati, E. Povoden-Karadeniz, P. Lang, P. Warczok, E. Kozeschnik:
"Thermo-kinetic Computer Simulation of Differential Scanning Calorimetry Curves of AlMgSi Alloys";
Vortrag: ICAA 12,
Japan, Yokohama;
05.09.2010
- 09.09.2010; in: "Proceedings of the 12th International Conference on Aluminium Alloys",
The Japan Institute of Light Metals,
1
(2010),
ISBN: 978-4-905829-11-9;
Paper-Nr. 3B-13 - P.1077-1082,
6 S.
A. Falahati, G. Requena, F. Lasagni, H. Mohammadian, H.P. Degischer:
"Precipitation kinetics of Si in Al-Si alloys revealed by dilatometry";
Vortrag: International Conference on Aluminium Alloys (ICAA11),
Aachen, Germany;
22.09.2008
- 28.09.2008; in: "Aluminium Alloys",
Wiley-Vch Gmbh,
Volume 1
(2008),
ISBN: 978-3-527-32367-8;
S. 732
- 738.
A. Falahati, S. Sakhawat, K. Spiradek-Hahn, A. Kottar:
"Characterization of the Heat Affected Zone of a Precipitation Hardening Martensitic Stainless Steel";
Vortrag: Praktischen Metallographie,
Jena Deutschland;
17.09.2008
- 19.09.2008; in: "Fortschritte in der Metallographie",
Mat Info / Werstoff-Informationsgesselschaft,
40
(2008),
ISBN: 3-88355-370-0;
S. 153
- 158.
B. Feichtenschlager, G. Kickelbick, T. Koch, C. Lomoschitz, S. Pabisch, H. Peterlik, M Sajjad:
"Ordering Phenomena Of Organic Moieties On Nanoparticle Surfaces And Their Influence On The Dispersibility In Organic Media";
Poster: 13. Österreichische Chemietage,
Wien;
24.08.2009
- 27.08.2009; in: "13. Österreichische Chemietage",
(2009),
ISBN: 978-3-900554-66-8;
1 S.
B. Feichtenschlager, G. Kickelbick, T. Koch, S. Pabisch, H. Peterlik, M Sajjad:
"Chemical tailoring of nanoparticle surfaces: How do nanoscopic properties affect macroscopic properties in inorganic-organic nanocomposites?";
Poster: 3rd EuCheMS Chemistry Congress,
Nürnberg;
29.08.2010
- 02.09.2010; in: "Programme - Abstracts",
(2010),
1 S.
B. Feichtenschlager, G. Kickelbick, T. Koch, S. Pabisch, H. Peterlik, M Sajjad:
"Inorganic-Organic Nanocomposites: Chemical Tailoring of Nanoparticle Surfaces for Optimum Homogeneity";
Vortrag: Minisymposium: From Molecules to Materials,
Saarbrücken, Deutschland;
10.09.2009
- 11.09.2009; in: "From Molecules to Materials",
(2009).
B. Feichtenschlager, G. Kickelbick, T. Koch, S. Pabisch, H. Peterlik, M Sajjad:
"New Silane-Capping-Agents Based on Flexible Chains for Dispersibility Enhancement of Inorganic Particles in Organic Media";
Poster: 5th European Silicon Days 2009,
Wien;
20.09.2009
- 22.09.2009; in: "5th European Silicon Days - Programme, Abstracts and List of Participants",
(2009),
S. 114.
B. Feichtenschlager, S. Pabisch, H. Peterlik, M Sajjad, T. Koch, G. Kickelbick:
"Generation Of Light Weight Engineering Materials - Better Inorganic-Organic Nanocomposites Through Interface Design";
Vortrag: International Conference on "Topical Issues of Rational Use of Natural Resources",
St. Petersburg, Russia (eingeladen);
21.04.2010
- 23.04.2010; in: "Abstracts Part 2",
(2010),
ISBN: 978-5-94211-447-3;
S. 132
- 133.
B. Feichtenschlager, S. Pabisch, H. Peterlik, M Sajjad, T. Koch, G. Kickelbick:
"Ordering Phenomena of Organic Moieties on Nanoscopic Surfaces: Tailoring the Interface in Organic-Inorganic Nanocomposites";
Poster: Junior Scientist Conference 2010,
Vienna;
07.04.2010
- 09.04.2010; in: "Proceedings",
(2010),
ISBN: 978-3-200-01797-9;
S. 221
- 222.
R. Felzmann, S. Gruber, G. Mitteramskogler, M. Pastrama, A. Boccaccini, J. Stampfl:
"Lithography-Based Additive Manufacturing Of Customized Bioceramic Parts For Medical Applications";
Poster: Biomed 2013,
Innsbruck;
15.02.2012
- 17.02.2012; in: "Biomed 2013",
ACTA Press Proceedings,
Doi: 10.2316/p.2012.764-105
(2012),
ISBN: 978-0-88986-953-0.
K. Fizor, K. Kalinyaprak-Icten, S. Knaus, T. Koch:
"Synthesis and Characterization of Graft Copolymers of Tapioca Starch";
Poster: EPF 2009, European Polymer Congress,
Graz, A;
12.07.2009
- 17.07.2009; in: "EPF'09, Book of Abstracts",
(2009),
S. 128.
C. Fleischberger, V. Archodoulaki, I. Steiner:
"Active food packaging materials containing citric acid and sorbic acid";
Poster: 5th International Symposium on Food Packaging,
Berlin;
14.11.2012
- 16.11.2012; in: "Food Packaging - Scientific Developments Supporting Safety and Innovation",
ILSI Europe (Hrg.);
(2012),
S. 122.
C. Fleischberger, V. Archodoulaki, I. Steiner:
"Influence Of Active Packaging Materials On Microorganisms Of Selected Food Stuffs";
Poster: Eurofoodchem Xvii,
Istanbul;
07.05.2013
- 10.05.2013; in: "Eurofoodchem Xvii - Book of Abstracts",
H. Köksel (Hrg.);
(2013),
ISBN: 978-605-63935-0-1;
S. 695.
C. Fleischberger, V. Archodoulaki, I. Steiner:
"Mikrobiologisch wirksame Substanzen in "aktiven" Lebensmittel-Verpackungsfolien";
Vortrag: Österreichische Lebensmittelchemikertage 2012,
Linz;
25.04.2012
- 27.04.2012; in: "Haltbarkeit von Lebensmitteln",
F. Bauer (Hrg.);
Gesellschaft Österreichischer Chemiker, 1010 Wien,
Tagungsband der Österreichischen Lebensmittelchemikertage 2012
(2012),
ISBN: 978-3-900554-705;
S. 12
- 17.
A. Frank, I Berger, G Dreiling, N. Schuler, J.-M. Storheil, E. Mayrbäurl, C Smith, F. Krause, L. Niemöller, P. Gabriels, Y.S. Deshmukh, T. Koch, F. Arbeiter, G. Pinter:
"Fractue mechanical characterization of non-virgin pipe materials";
Vortrag: ANTEC 2018,
Orlando;
07.05.2018
- 10.05.2018; in: "Proceedings ANTEC 2018",
(2018),
7 S.
A. Frank, I Berger, M Messiha, C.-G. Ek, N. Schuler, J.-M. Storheil, E. Mayrbäurl, S. Heeley, F. Krause, L. Niemöller, P. Gabriels, Y.S. Deshmukh, F. Arbeiter, T. Koch, G. Pinter:
"Slow crack growth resistance of non-virgin polymers";
Vortrag: Plastic Pipes XIX,
Las Vegas;
24.09.2018
- 26.09.2018; in: "Proceedings of the 19th Plastic Pipes Conference PPXIX",
Plastic Pipes Conference Association,
(2018),
Paper-Nr. ID192,
11 S.
M. Franz, S. Lüftl, A. Maric, I. Atassi, N. V. Blaz, M. Hrovat, K. Makarovic, G. Radosavljevic:
"Characterization of Ferrite LTCC Tapes";
Poster: 36th International Spring Seminar on Electronics Technology - ISSE 2013,
Alba Iulia, Romania;
08.05.2013
- 12.05.2013; in: "Book of Abstracts",
(2013),
ISBN: 978-606-613-064-6;
S. 14
- 15.
C. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska:
"TEMPLATING OF ORGANIC/INORGANIC HYBRID MATERIALS";
Poster: E-MRS 2005 Spring Meeting,
Strasbourg, France;
31.05.2005
- 03.06.2005; in: "E-MRS 2005 Spring Meeting",
(2005),
S. I - 28/54.
C. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, R. Inführ, T. Koch, S. Seidler:
"Hierarchisch strukturiertes Siliziumdioxid und seine mechanischen Eigenschaften";
Vortrag: 2. Wiener Biomaterialsymposium,
TU Wien;
22.11.2006
- 24.11.2006; in: "2. Wiener Biomaterialsysmposium",
(2006),
9 S.
C. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"Fabrication of Bio-inspired Silica Composites";
Hauptvortrag: MRS Fall Meeting 2004,
Boston (USA);
29.11.2004
- 03.12.2004; in: "2004 MRS Fall Meeting",
MRS,
http://lucy.mrs.org/meetings/fall2004/abstracts/f04_abstract_ee.pdf
(2004),
Paper-Nr. EE 9.15,
1 S.
C. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"NANOSTRUCTURED SILICA/POLYMER-MONOLITHS";
Poster: ISOS XIV, 14th International Symposium on Organosilicon Chemistry; 3rd European Organosilicon Days,
Würzburg, Germany;
31.07.2005
- 05.08.2005; in: "ISOS XIV, 14th International Symposium on Organosilicon Chemistry",
(2005),
S. 158.
Ch. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, R. Inführ, T. Koch, S. Seidler:
"3-Dimensional Mesoporous Silica Monoliths and their Structural and Mechanical Properties";
Vortrag: Polymerwerkstoffe 2006,
Halle/Saale, Deutschland;
27.09.2006
- 29.09.2006; in: "Polymerwerkstoffe 2006 - Abstracts",
(2006),
ISBN: 3-86010-856-5;
S. 34.
Ch. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, R. Inführ, S. Seidler:
"Templating of organic/inorganic hybrid materials";
Poster: EMRS Spring Meeting 2005,
Strasbourg, France;
31.05.2005
- 03.06.2005; in: "European Materials Research Society Spring Meeting E-MRS 2005 - Scienific Programme",
(2005),
S. I -28/54.
Ch. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"Fabrication of Bio-inspired Silica Composites";
Poster: MRS Fall Meeting,
Boston, USA;
29.11.2004
- 03.12.2004; in: "MRS Fall Meeting 2004 - Program & Exhibit Guide",
(2004),
S. 729.
Ch. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"Nonostructured silica/polymer-monoliths";
Poster: ISOSXIV 3rd European Organosilicon Days,
Würzburg, Deutschland;
31.07.2006
- 02.08.2006; in: "ISOSXIV 3rd European Organosilicon Days - Abstracts",
(2006),
S. P071.
S. Fröhlich, V. Archodoulaki, G. Allmaier, M. Marchetti-Deschmann:
"Protein adsorption on ultra-high molecular weight polyethylene joint - Proteomics correlated to MALDI imaging mass spectrometry data";
Poster: EUPA/BSPR Proteomics Meeting 2012,
Glasgow, UK;
09.07.2012
- 12.07.2012; in: "EUPA/BSPR Proteomic Meeting 2012 - Book of Abstracts",
(2012),
S. P147.
S. Fröhlich, L. Dekker, O. Belgacem, A. Barnes, T. Luider, V. Archodoulaki, G. Allmaier, M. Marchetti-Deschmann:
"Correlating surface changes of UHMW-PE hip joint explants to time-dependent biomolecule adsorption by MALDI-TOF imaging mass spectrometry";
Vortrag: 60th ASMS conference,
Vancouver, CAN;
20.05.2012
- 24.05.2012; in: "Proceedings of the 60th American Society of Mass Spectrometry Conference",
American Society of Mass Spectrometry,
(2012),
Paper-Nr. WOF 8:30 am, 254.
S. Fröhlich, M. Kennedy, V. Archodoulaki, G. Allmaier, M. Marchetti-Deschmann:
"Lipid adsorption and diffusion correlated with UHMW-PE modifications investigated by MALDI mass spectrometry imaging, ion mobility separation and CID";
Vortrag: 31th Informal Meeting on Mass Spectrometry (IMMS2013),
Palermo, Italien;
05.05.2013
- 08.05.2013; in: "Book of Abstract",
(2013),
ISBN: 978-88-907388-2-1;
S. 38.
S. Gäbler, T. Koch, J. Stampfl, S. Seidler, H. Redl, S. Trattnig, R. Weidisch:
"Bestimmung der viskoelastischen Eigenschaften von Hydrogelen basierend auf Polyethylenglykol-Diacrylat und humanem Gelenkknorpel";
Poster: 3. Wiener Biomaterialsymposium,
Wien;
19.11.2008
- 21.11.2008; in: "3. Wiener Biomaterialsymposium, Tagungsband",
(2008),
ISBN: 978-3-200-01613-2;
S. 47.
J. Gahler, M. Marchetti-Deschmann, R. Markut-Kohl, V. Archodoulaki, G. Allmaier:
"Imaging mass spectrometry of ultr high molecular weight polyethylene explantates";
Vortrag: 4. Wiener Biomaterialsymposium: Von der Werkstoffentwicklung bis zur klinischen Anwendung,
TU Wien, Wien (eingeladen);
15.11.2010
- 17.11.2010; in: "4. Wiener Biomaterialsymposium - Abstractbuch",
(2010),
S. 55.
F. Gantner, P. Gruber, M. Lunzer, W. Steiger, A. Ovsianikov:
"Fabrication Of High-Volume 3d 2-Photon Polymerizationmicrostructures";
Vortrag: Vienna young Scientists Symposium VSS 2019,
Wien;
13.06.2019
- 14.06.2019; in: "Vienna young Scientists Symposium",
K. Ehrmann, H. Mansouri Khosravi et al. (Hrg.);
(2019),
ISBN: 978-3-9504017-9-0;
S. 118
- 119.
P. Gauss, C. Gorsche, M. Griesser, T. Koch, J. Stampfl, N. Moszner, R. Liska:
"Basic Investigation of Addition Fragmentation Chain Transfer Agents in Photopolymerization of Methacrylic Monomers";
Vortrag: RadTech Europe 2015 Conference,
Prague;
13.10.2015
- 15.10.2015; in: "Abstract Book",
(2015),
S. 16.
P. Gauss, K. Seidler, H. Reghunathan, M. Kury, A. Svirkova, M. Marchetti-Deschmann, P. Dorfinger, T. Koch, J. Stampfl, N. Moszner, C. Gorsche, R. Liska:
"Tailored Photopolymer Networks Using Addition Fragmentation Chain Transfer";
Vortrag: XXII. Bratislava International Conference on Macromolecules,
Bratislava;
06.09.2016
- 09.09.2016; in: "BIMac 2016 Programme Book and Book of Abstracts",
(2016),
ISBN: 978-80-89841-01-1;
S. 12.
C. Genzel, W. Schneider, A. Pyzalla, W. Reimers:
"Complementary Diffraction Analysis of Residual Stress and Microstructure- From Surface to Volume";
Poster: 11. Jahrestagung der Deutschen Gesellschaft für Kristallographie (DGK),
Berlin;
10.03.2003
- 13.03.2003; in: "Humboldt-Universität zu Berlin 11. Jahrestagung der Deutschen Gesellschaft für Kristallographie (DGK) vom 10. bis 13. März 2003 in Berlin",
Oldenbourg Verlag,
München
(2003),
S. 70.
S. Glatz, R. Hollerweger, S. Kolozsvári, R. Rachbauer, J. Paulitsch, P.H. Mayrhofer:
"Influence of Zirconium on thermal stability and mechanical properties of arc evaporated Ti-Al-N hard coatings";
Poster: 42nd International Conference on Metallurgical Coatings and Thin Films,
San Diego;
20.04.2015
- 24.04.2015; in: "Book of Abstracts",
(2015),
S. 97.
S.A. Glatz, R. Hollerweger, S. Kolozsvári, R. Rachbauer, J. Paulitsch, P.H. Mayrhofer:
"Influence of Zirconium on thermal stability and mechanical properties of arc evaporated Ti-Al-N hard coatings";
Poster: 14th International Conference on Plasma Surface Engineering,
Garmisch-Partenkirchen;
15.09.2014
- 19.09.2014; in: "Book of Abstracts",
(2014),
S. 1.
S.A. Glatz, C.M. Koller, H. Bolvardi, S. Kolozsvári, H. Riedl, P.H. Mayrhofer:
"The effect of alloying molybdenum to cathodic arc evaporated Ti-Al-N coatings on their mechanical properties and thermal stability";
Poster: 15th International Conference on Plasma Surface Engineering,
Garmisch-Partenkirchen;
12.09.2016
- 16.09.2016; in: "Book of Abstracts",
(2016),
S. 111.
S.A. Glatz, C.M. Koller, R. Rachbauer, S. Kolozsvári, H. Riedl, P.H. Mayrhofer:
"Increasing mechanical and tribological properties of cathodic arc evaporated Ti-Al-N coatings by Mo- and W-alloying";
Vortrag: 43rd International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego (USA);
25.04.2016
- 29.04.2016; in: "Book of Abstracts",
(2016),
S. 74.
S.A. Glatz, C.M. Koller, R. Rachbauer, S. Kolozsvári, H. Riedl, P.H. Mayrhofer:
"The effect of alloying molybdenum to cathodic arc evaporated Ti-Al-N coatings on their mechanical properties and thermal stability";
Poster: 43rd International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego (USA);
25.04.2016
- 29.04.2016; in: "Book of Abstracts",
(2016),
S. 96.
S.A. Glatz, C.M. Koller, H. Riedl, R. Rachbauer, S. Kolozsvári, P.H. Mayrhofer:
"The influence of Mo content and bias potential on the structure, mechanical properties, and tribological behaviour of cathodic arc evaporated Ti-Al-N hard coatings";
Poster: AVS 62nd International Symposium & Exhibition,
San Jose, USA;
18.10.2015
- 23.10.2015; in: "Book of Abstracts",
(2015),
S. 147.
S.A. Glatz, J. Paulitsch, H. Riedl, R. Hollerweger, R. Rachbauer, S. Kolozsvári, P.H. Mayrhofer:
"Tribological Behavior of Cathodic Arc Evaporated Ti-Al-N Based Hard Coatings";
Vortrag: 42nd International Conference on Metallurgical Coatings and Thin Films,
San Diego;
20.04.2015
- 24.04.2015; in: "Book of Abstracts",
(2015),
S. 24.
S.A. Glatz, J. Paulitsch, H. Riedl, R. Hollerweger, R. Rachbauer, S. Kolozsvári, P.H. Mayrhofer:
"Tribological Behavior of Cathodic Arc Evaporated Ti-Al-N Based Hard Coatings";
Vortrag: Symposium 2015 der Österreichischen Tribologischen Gesellschaft (ÖTG),
Technologie- und Forschungszentrum, Wiener Neustadt;
25.11.2015; in: "Tribology in Industry and Research - Proceedings",
(2015),
ISBN: 978-3-901657-51-1;
S. 125
- 126.
S.A. Glatz, J. Paulitsch, H. Riedl, R. Rachbauer, S. Kolozsvári, P.H. Mayrhofer:
"Tribological behaviour of cathodic arc evaporated Ti-Al-N, Ti-Al-Zr-N, and Ti-Al-Mo-N hard coatings";
Poster: 20th International Conference on Wear of Materials,
Toronto;
12.04.2015
- 16.04.2015; in: "Book of Abstracts",
(2015),
1 S.
R. Gmeiner, E. Fantino, B. Steyrer, A. Samusjew, B. Husar, R. Liska, J. Stampfl:
"Additive Manufacturing of Filled and Unfilled Bio-Photopolymers";
Poster: Jahrestagung der Deutschen Gesellschaft für Biomaterialien 2013,
Erlangen;
26.09.2013
- 28.09.2013; in: "Bionano-Materials",
Bionanomaterials/de Gruyter,
2013/volume 14/number S1
(2013),
ISSN: 2193-0651;
S. 46.
R. Gmeiner, G. Mitteramskogler, M. Pfaffinger, J.-A. Schönherr, J. Ebert, J. Laubersheimer, J. Stampfl:
"Lithography-Based Additive Manufacturing of High Performance Ceramics";
Vortrag: 3rd European Symposium of Photopolymer Science,
Vienna;
09.09.2014
- 12.09.2014; in: "3rd European Symposium of Photopolymer Science",
Book-of-Abstracts.com,
(2014),
ISBN: 978-3-9502992-9-8;
S. OP-49.
U. Göbel, G. Lefranc, A. Pyzalla, H.P. Degischer:
"Zerstörungsfreie Untersuchung von Eigenspannungen in AlSiMg/SiC/70p Metall-Matrix-Verbundwerkstoffen mit Hilfe von Röntgen- und Neutronenbeugung";
Vortrag: 14. DGM Symposium Verbundwerkstoffe und Werkstoffverbunde,
Wien;
02.07.2003
- 04.07.2003; in: "Verbundwerkstoffe ",
H.P. Degischer (Hrg.);
Wiley-VCH Verlag,
Weinheim
(2003),
ISBN: 3-527-30762-1;
S. 230
- 235.
C. Gorsche, P. Knaack, D. Bomze, K. Seidler, P. Gauss, M. Griesser, I. Krossing, T. Koch, N. Moszner, R. Liska:
"Toughening of Radical Photopolymer Networks and Advances in Cationic Photopolymerization";
Vortrag: Noblelight UV Technical Seminar 2016,
Tokio;
22.04.2016; in: "21st Noblelight UV Technical Seminar",
21st Noblelight UV Technical Seminar-proceedings,
(2016),
S. 05.
C. Gorsche, T. Koch, N. Moszner, J. Stampfl, R. Liska:
"Allyl Sulfone / Dimethacrylate Networks: Homogeneous And Tough Photopolymer Networks For Biomedical Applications";
Vortrag: ESPS 2014,
Vienna;
09.09.2014
- 12.09.2014; in: "3rd European Symposium of Photopolymer Science",
(2014),
ISBN: 978-3-9502992-9-8;
S. 73.
C. Gorsche, R. Liska, S. Ligon, B. Husar, A. Mautner, M. Schwentenwein, C. Heller, J. Stampfl, G. Russmüller:
"A new Generation of low toxic Monomers for Additive Manufacturing Technology";
Vortrag: E-MRS 2012 FALL MEETING (European Materials research Society),
Warschau;
17.09.2012
- 21.09.2012; in: "E-MRS 2012 Fall Meeting",
(2012).
C. Gorsche, A. Mautner, A. Gugg, X.H. Qin, N. Moszner, J. Stampfl, K. Macfelda, G. Russmüller, R. Liska:
"UV-Initiated Frontal Polymerization and Other New Advances in Radical Photopolymerization";
Vortrag: 18th Fusion UV Seminar 2012,
Osaka, Tokio (eingeladen);
21.02.2012
- 23.02.2012; in: "18th Fusion UV Seminar 2012 - Proceedings",
(2012),
S. 2-1.
C. Gorsche, A. Ovsianikov, J. Stampfl, R. Liska:
"Photopolymerization: providing A triangle for material design, Biomaterials, and 3D printing";
Vortrag: VSS 2015,
Vienna;
25.06.2015
- 26.06.2015; in: "Book of Abstracts",
Richard Zemann,
(2015),
ISBN: 978-3-9504017-0-7;
S. 138
- 139.
C. Gorsche, K. Seidler, P. Gauss, M. Griesser, T. Koch, G. Gescheidt, N. Moszner, R. Liska:
"Efficient tuning of (meth)acrylate polymer network architecture for 3D Printing";
Vortrag: P2M Lacanau,
Lacanau (eingeladen);
26.05.2015
- 29.05.2015; in: "Abstracts",
(2015).
C. Gorsche, K. Seidler, P. Gauss, M. Griesser, T. Koch, N. Moszner, R. Liska:
"Addition Fragmentation Chain Transfer Reagents With Various Activating And Leaving Groups And Their Potential As Network Modifiers";
Poster: Photopolymerization Fundamentals 2015,
Boulder;
13.09.2015
- 16.09.2015; in: "Abstract USB",
(2015).
C. Gorsche, K. Seidler, P. Gauss, G. Harakaly, M. Griesser, T. Koch, J. Stampfl, N. Moszner, R. Liska:
"Tough And Low Shrinkage Photopolymers For 3d-Printing";
Vortrag: Photopolymerization Fundamentals 2015,
Boulder;
13.09.2015
- 16.09.2015; in: "Abstract USB",
(2015).
C. Gorsche, K. Seidler, M. Griesser, T. Koch, N. Moszner, R. Liska:
"Using Addition Fragmentation Chain Transfer For Tough Methacrylate-Based Networks With Low Shrinkage Stress";
Poster: Photopolymerization Fundamentals 2015,
Boulder;
13.09.2015
- 16.09.2015; in: "Abstract USB",
(2015).
C. Gorsche, K. Seidler, M. Kury, J. Steindl, P. Dorfinger, J. Stampfl, N. Moszner, R. Liska:
"The power of chain transfer in the field of photopolymer applications";
Poster: 12th International Conference on Advanced Polymers via Macromolecular Engineering,
Ghent;
21.05.2017
- 25.05.2017; in: "Advanced Polymers via Macromolecular Engineering",
Advanced Polymers via Macromolecular Engineering,
Nr.12, Ghent, Belgium
(2017),
S. 143.
C. Gorsche, K. Seidler, H. Reghunathan, P. Gauss, M. Kury, P. Dorfinger, T. Koch, J. Stampfl, N. Moszner, R. Liska:
"Addition fragmentation chain transfer: Enriching the field of photopolymer applications";
Vortrag: 4th European Symposium of Photopolymer Science,
Leipzig;
11.09.2016
- 14.09.2016; in: "ESPS 2016",
(2016),
S. O-7.
C. Gorsche, J. Stampfl, R. Liska:
"Photopolymerization: A powerful technique for the fabrication and 3D printing of biomaterials";
Vortrag: ISBPPB 2015,
Orlando (eingeladen);
08.07.2015
- 10.07.2015; in: "Abstracts",
(2015).
C. Gorsche, M. Tromayer, Z. Li, J. Torgersen, A. Ajami, A. Rosspeintner, S. Naumov, T. Scherzer, A. Ovsianikov, R. Liska:
"Efficent synthesis of two-photon initiators via one step aldol condensation";
Poster: Photopolymerization Fundamentals 2013,
Jackson Hole;
22.09.2013
- 25.09.2013; in: "Book of Abstracts",
(2013).
W. Grellmann, I. Kotter, S. Seidler, T. Koch:
"Zähigkeitscharakterisierung von EPR-modifizierten Polypropylenwerkstoffen";
Poster: Werkstoffprüfung 2003,
Bad Neuenahr, Germany;
04.12.2003
- 05.12.2003; in: "Herausforderung durch den industriellen Fortschritt",
O. Buchholz, S. Geisler (Hrg.);
(2003),
ISBN: 3-514-00703-9;
S. 344
- 350.
W. Grellmann, I. Kotter, S. Seidler, T. Koch:
"Zähigkeitscharakterisierung von EPR-modifizierten Polypropylenwerkstoffen";
Poster: 11. Internationale Fachtagung Polymerwerkstoffe 2004,
Halle/Saale;
29.09.2004
- 01.10.2004; in: "Polymeric Materials 2004. Abstracts",
G. H. Michler (Hrg.);
(2004),
ISBN: 3-928466-68-2;
S. PI-16.
W. Grellmann, R. Lach, S. Seidler:
"Requirements on the Specimen Geometry to Determine Intrisic Fracture Mechanics Values of Polymer Materials";
Poster: 14th Bienniel Conference on Fracture - ECF 14,
Cracow, Polen;
08.09.2002
- 13.09.2002; in: "ECF 14 Fracture Mechanics Beyond 2000, Vol. I/III",
A. Neimitz, I. Rokach, D. Kocanda, K. Golos (Hrg.);
(2002),
S. 631
- 638.
W. Grellmann, S. Seidler, R. Lach:
"Geometry-Independent Fracture Mechanics Values of Polymers- Structural Interpretation for Geometrical Requirements";
Poster: 9. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Martin-Luther-Univ. Halle-Wittenberg Merseburg (D);
25.06.2003
- 27.06.2003; in: "9. Problemseminar Deformations- und Bruchverhalten von Kunststoffen",
CD-ROM,
(2003),
ISBN: 3-86010-710-0;
S. 360
- 363.
W. Grellmann, S. Seidler, R. Lach:
"Geometry-independet Fracture Mechanics Values - Precondition for Characterizing the Toughness of Polymers";
Poster: Polymerwerkstoffe 2002,
Halle (Saale);
25.09.2002
- 27.09.2002; in: "Polymerwekstoffe 2002",
(2002),
S. 98
- 99.
N. Große-Heilmann, I. Zylla, E. Kozeschnik, A. Peters:
"High Strength TRIP Steels processed by Two-step Quenching & Partitioning";
Vortrag: 4th International Conference on Steels in Cars and Trucks,
Braunschweig;
15.06.2014
- 19.06.2014; in: "4th International Conference on Steels in Cars and Trucks",
(2014),
S. 731
- 737.
N. Große-Heilmann, I. Zylla, E. Kozeschnik, A. Peters:
"One-Step Q\&P of seamless tubes made from 42SiCrB";
Vortrag: Materials Science & Technology 2012,
Pittsburgh, PA;
07.10.2012
- 11.10.2012; in: "MS&T '12: Materials Science & Technology 2012 Conference & Exhibition (Conference Proceedings)",
Wiley,
(2012),
ISBN: 978-0-87339-761-2;
S. 929
- 936.
N. Große-Heilmann, I. Zylla, E. Kozeschnik, A. Peters:
"Two-Step Quenching & Partitioning of 42SiCrB Steel";
Vortrag: THERMEC 2013,
Las Vegas;
02.12.2013
- 06.12.2013; in: "THERMEC 2013",
Materials Science Forum,
Volumes 783 - 786
(2014),
S. 738
- 743.
S. Großeiber, C. Gusenbauer, S. Ilie, E. Kozeschnik, G. Requena:
"Damage initiation during hot deformation of a continuously cast steel";
Vortrag: iCT 2014,
Wels;
25.02.2014
- 28.02.2014; in: "Proceedings of Conference on Industrial Computed Tomography (iCT 2014))",
(2014),
S. 139
- 140.
S. Großeiber, C. Gusenbauer, S. Ilie, G. Requena, E. Kozeschnik:
"Relevance of hot ductility tests to crack sensitivity during continuous casting of steel";
Poster: THERMEC 2013,
Las Vegas;
02.12.2013
- 06.12.2013; in: "Processing and Manufacturing of Advanced Materials - Proceedings to THERMEC 2013",
Advanced Materials Research,
Vol. 922
(2014),
S. 201
- 206.
S. Großeiber, M. Rath, E. Kozeschnik:
"Modeling of the interaction between precipitate formation and forming - A thermo-kinetic approach";
Vortrag: MEFORM 2013,
Altenberg;
20.03.2013
- 22.03.2013; in: "Simulation von Umformprozessen - MEFORM 2013",
(2013),
S. 69
- 78.
S. Großeiber, G. Requena, E. Kozeschnik, C. Gusenbauer, S. Ilie:
"Correlation Between Hot Ductility and Damage in Microalloyed Steel Slabs";
Vortrag: iCT 2012 Wels,
Wels;
19.09.2012
- 21.09.2012; in: "Proceedings of Conference on Industrial Computed Tomography (iCT 2012)",
(2012).
P. Gruber, M. Markovic, K. Hölzl, M. Tromayer, S. Van Vlierberghe, P. Dubruel, R. Liska, J. Stampfl, A. Ovsianikov:
"Laser photofabrication of 3D cell-containing hydrogel constructs";
Poster: 2014 Tissue Engineering and Regenerative Medicine International Society-Asia Pacific Meeting (TERMIS-AP 2014),
Daegu, S. Korea;
24.09.2014
- 27.09.2014; in: "2",
(2014).
P. Gruber, M. Markovic, K. Hölzl, M. Tromayer, S. Van Vlierberghe, P. Dubruel, R. Liska, J. Stampfl, A. Ovsianikov:
"Laser photofabrication of 3D cell-containing hydrogel constructs";
Vortrag: ICB 2014,
Pohang, S. Korea;
28.09.2014
- 01.10.2014; in: "International Conference on Biofabrication",
(2014).
P. Gruber, M. Markovic, K. Hölzl, M. Tromayer, S. Van Vlierberghe, P. Dubruel, R. Liska, J. Stampfl, A. Ovsianikov:
"Laser Photofabrication of Cell-Containing Hydrogel Constructs";
Poster: LPM 2014,
Vilnius;
17.06.2014
- 20.06.2014; in: "LPM 2014 Program & Technical Digest",
(2014),
S. 263.
P. Gruber, M. Markovic, K. Hölzl, M. Tromayer, S. Van Vlierberghe, P. Dubruel, R. Liska, J. Stampfl, A. Ovsianikov:
"Laser Photofabrication of Cell-Containing Hydrogel Constructs";
Poster: 3rd European Symposium of Photopolymer Science,
Vienna;
09.09.2014
- 12.09.2014; in: "3rd European Symposium of Photopolymer Science",
(2014),
S. 167.
P. Gruber, M. Markovic, L. Kain, O.G. Andriotis, M. Tromayer, P. Dubruel, S. van Vlierberghe, P.J. Thurner, R. Liska, A. Ovsianikov:
"Stiffness Guided Cell Migration in 3D Hydrogels via Multiphoton Grafting";
Poster: Donau Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Donau Vltava Sava Polymer Meeting 2017",
Book of Abstract,
(2017),
S. PO-8.
P. Gruber, M. Markovic, M. Tromayer, S Mühleder, J. Van Hoorick, K. Hölzl, W Holnthoner, H. Redl, P. Dubruel, R. Liska, S. Van Vlierberghe, A. Ovsianikov:
"Laser photofabrication of 3D hydrogel structures within microfluidic channels";
Vortrag: International Conference on Biofabrication 2016,
Winston-Salem, North Carolina, USA;
29.10.2016
- 31.10.2016; in: "Biofabrication 2016",
elsevier,
(2016),
S. OP-16.
P. Gruber, J. Van Hoorick, M. Tromayer, P. Dubruel, S. Van Vlierberghe, A. Ovsianikov:
"Laser photofabrication of gelatin hydrogel constructs with high degree of functionalization";
Poster: 10th World Biomaterials Congress,
Montreal;
17.05.2016
- 22.05.2016; in: "Front. Bioeng. Biotechnol. Conference Abstract: 10th World Biomaterials Congress",
(2016).
S. Gruber, R. Felzmann, G. Mitteramskogler, R. Liska, J. Stampfl:
"Generation of ceramic parts via lithography-based AMT";
Vortrag: Materials Science and Engineering 2012,
Darmstadt;
25.09.2012
- 27.09.2012; in: "MSE Programme",
(2012),
S. 37.
S. Gruber, G. Mitteramskogler, R. Felzmann, P. Tesavibul, R. Liska, J. Stampfl:
"Generative Erzeugung von biokeramischen Bauteilen";
Vortrag: Rapid.Tech 2012,
Erfurt;
08.05.2012
- 09.05.2012; in: "Fachmesse und Anwendertagung für Rapid-Technologie",
(2012),
ISBN: 978-3-932875-34-2;
S. 88 (105).
S. Gruber, A. Monfared, N. Blevins, K. Salisbury, J. Stampfl:
"Multi-material middle-ear simulator - generative manufacturing technology for medical applications";
Poster: 4. Wiener Biomaterialsymposium,
Wien;
15.11.2010
- 17.11.2010; in: "Tagungsband",
J. Stampfl (Hrg.);
(2010),
S. 54.
S. Gruber, J. Torgersen, A. Neumeister, R. Felzmann, R. Liska, J. Stampfl:
"Advanced Photopolymer-based Additive Manufacturing Systems Using High Performance Light Sources";
Vortrag: 7th International Symposium on Emerging and Industrial DLP® Applications,
Frankfurt;
30.10.2012; in: "7th International Symposium on Emerging and Industrial DLP® Applications",
(2012).
D. Grunenberg, C. Gorsche, M. Griesser, T. Koch, P. Dorfinger, J. Stampfl, N. Moszner, R. Liska:
"Tough Dimethacrylate Networks with Low Shrinkage Stress: Benefiting from β-Allyl Sulfones as Addition-Fragmentation Chain Transfer Agents";
Poster: BPS 2015,
Bayreuth;
20.09.2015
- 22.09.2015; in: "Book of Abstracts",
(2015).
O. Guillaume:
"How cells isolated from fat could help to better heal hernia defects";
Vortrag: European Hernia Society,
Hamburg, Germany;
11.09.2019
- 14.09.2019; in: "European Hernia Society",
Final Program,
(2019).
O. Guillaume, A. Arlan, P. Dubruel, S. van Vlierberghe, A. Ovsianikov:
"Building Macro-Tissue Assemblies Using A Synergetic Tissue Engineering Strategy";
Vortrag: Termis - 6th World Congress 2021,
Maastricht;
15.11.2021
- 19.11.2021; in: "Termis - 6th World Congress 2021",
(2021),
S. 2035.
O. Guillaume, A. Ovsianikov, A. Arlan, G. Weisgrab, O. Kopinski-Grünwald, P. Dubruel, S. Van Vlierberghe:
"Biodegradable microscaffolds made by 2PP as novel armamentum for tissue engineering";
Vortrag: EUROMAT 2021,
Online;
13.09.2021; in: "Report of Abstracts",
(2021),
1 S.
O. Guillaume, G. Weisgrab, A. Arslan, P. Dubruel, S. Vlierberghe, A. Ovsianikov:
"Scaffold-reinforced spheroids as a new kid on the block";
Vortrag: 11th World Biomaterials Congress,
Virtual;
11.12.2020
- 15.12.2020; in: "Programme",
(2020).
O. Guillaume, G. Weisgrab, A. Arslan, S. van Vlierberghe, A. Ovsianikov:
"Two-photon polymerization for producing cellularized building blocks: new opportunities for orthopaedic repair";
Vortrag: 2021 eCM XX: Biofabrication for Orthopaedics,
Davos;
03.12.2021
- 05.12.2021; in: "eCM Online Periodical Abstracts 2021, Collection 3",
(2021),
S. 38.
R. Haas, H.P. Degischer, P. Pongratz:
"Werkstoffcharakterisierung von Drähten aus korrosionsbeständigem Stahl";
Vortrag: XXIV. Verformungskundliches Kolloquium,
Planneralm, Österreich;
26.02.2005
- 05.03.2005; in: "XXIV. Verformungskundliches Kolloquium - Tagungsband",
B. Buchmayr (Hrg.);
Montanuniversität Leoben, Lehrstuhl für Umformtechnik,
(2005),
ISBN: 3-902078-06-5;
S. 97
- 102.
R. Haas, H.P. Degischer, P. Pongratz, H. Knoblich:
"Verformungs-Martensit in Violinsatien aus rostfreiem Stahl";
Vortrag: 11. Internationale Metallographie-Tagung,
Leoben;
11.09.2002
- 13.09.2002; in: "Fortschritte in der Metallographie",
A. Kneissl, F. Jeglitsch (Hrg.);
Werkstoff-Informationsgesellschaft,
Sonderbände der Praktischen Metallographie - 34
(2003),
ISBN: 3-88355-313-1;
S. 51
- 58.
R. Haas, H.P. Degischer, P. Pongratz, A. Pyzalla, W. Reimers:
"Gefüge und Eigenschaften kaltverformter Cr Ni Stahldrähte";
Vortrag: 52. Metallkunde Kolloquium,
Lech am Arlberg, Österreich;
19.04.2006
- 21.04.2006; in: "52. Metallkunde-Kolloquium: Werkstoffforschung für Wirtschaft und Gesellschaft.",
(2006).
R. Haas, P. Pongratz, H.P. Degischer:
"Microstructure and Phases in Stainless Steel Violin Strings";
Poster: 1st Stanislaw Gorcyca Summer School on Advanced Transmission Electron Microscopy,
Krakau (Polen);
30.06.2003
- 05.07.2003; in: "1st Stanislaw Gorczyca Summer School on Advanced Transmission Electron Microscopy; Part I: Advanced sample preparation techniques for TEM",
A. Czyrska-Filemonowicz, B. Dubiel (Hrg.);
(2003),
ISBN: 83-7108-118-9;
S. 51
- 52.
E.J. Haberland, T. Koch, S. Burkert, A. Klemenz, S. Seidler:
"Nanoindentation Pilot Study on Embedded and Cut Human Auditory Ossicles";
Vortrag: 11. Internationale Fachtagung Polymerwerkstoffe 2004,
Halle/ Saale;
29.09.2004
- 01.10.2004; in: "Polymeric Materials 2004. Abstracts",
G. H. Michler (Hrg.);
(2004),
ISBN: 3-928466-68-2;
S. D09.
R Hahn, M. Bartosik, M. Arndt, P. Polcik, P.H. Mayrhofer:
"Annealing effect on the fracture toughness of CrN/TiN superlattices";
Vortrag: Plansee Seminar 2017,
Reutte;
29.05.2017
- 02.06.2017; in: "Proceedings of the 19th Plansee Seminar",
Plansee Seminar 2017 Proceedings,
(2017),
Paper-Nr. HM 38/1,
10 S.
R Hahn, M. Bartosik, M. Arndt, P. Polcik, P.H. Mayrhofer:
"X-Ray nanodiffraction pointing out formation limitations of c-AlN in nanolayered thin films";
Poster: NESY - Workshop: Future Possible Use of Neutron and Synchrotron Sources by the Austrian User Community,
Graz;
15.09.2016
- 16.09.2016; in: "Abstract Booklet: Future Possible Use of Neutron and Synchrotron Sources by the Austrian User Community",
(2016),
S. 42.
R Hahn, M. Bartosik, H. Riedl, H. Bolvardi, S. Koloszvári, P.H. Mayrhofer:
"X-ray nano-diffraction demonstrating microstructural evolution and formation limits of CrN/AlN superlattice thin films";
Vortrag: 63. Metallkunde Kolloquium,
Lech am Arlberg;
18.04.2017
- 21.04.2017; in: "63. Metallkunde Kolloquium - Book of Abstracts",
(2017),
S. 30.
R Hahn, M. Bartosik, R. Soler, C. Kirchlechner, G Dehm, P.H. Mayrhofer:
"Superlattice Effect for Enhanced Fracture Toughness of Hard Coatings";
Vortrag: Stress 2016,
Chicago;
02.10.2016
- 05.10.2016; in: "Stress Evolution in Thin Films and Coatings: From Fundamental Understanding to Control",
(2016),
S. 17.
R Hahn, M. Bartosik, A. Tymoszuk, P. Polcik, M. Arndt, P.H. Mayrhofer:
"Effect of Boron on the Mechanical Properties, especially Fracture Toughness, of TiN";
Vortrag: 45th International Conference on Metallurgical Coatings and Thin Films (ICMCTF) 2018,
San Diego, CA;
23.04.2018
- 27.04.2018; in: "International Conference on Metallurgical Coatings Thin Films - Book of Abstracts",
(2018),
S. 2.
S. Haider, M. Markovic, A. Ovsianikov, J. Van Hoorick, S. van Vlierberghe, G. Meinhardt, L. Saleh, M. Knöfler:
"Interaction of first trimester villous cytotrophoblasts and stromal cells in a 3D-organoid and 2D-hydrogel model";
Vortrag: International Federation of Placenta Associations (IFPA),
Amstardam;
30.08.2021
- 02.09.2021; in: "Abstracts/Placenta",
Placenta,
112
(2021),
S. e6.
G. Harakaly, C. Gorsche, K. Seidler, H. Reghunathan, P. Dorfinger, T. Koch, J. Stampfl, N. Moszner, R. Liska:
"Formation of tough photopolymer networks using addition fragmentation chain transfer: A viable concept for lithography based 3D printing";
Poster: 4th European Symposium of Photopolymer Science,
Leipzig;
11.09.2016
- 14.09.2016; in: "ESPS 2016",
(2016),
S. P-55.
G. Harakaly, K. Seidler, M. Griesser, C. Gorsche, J. Stampfl, R. Liska:
"α-Sulfonoxy acrylate chain transfer agents for 3D printing of tough photopolymers";
Poster: RadTech Europe 2015 Conference,
Prague;
13.10.2015
- 15.10.2015; in: "Abstract Book",
(2015),
S. 85.
B. Harrer, H.P. Degischer, J. Kastner:
"Microfocus Computed X-Ray Tomography of Segregations in High Strength Aluminium Alloys";
Vortrag: 10th European Conference on Non-Destructive Testing,
Moscow, Russia;
07.06.2010
- 11.06.2010; in: "10th European Conference on Non-Destructive Testing",
(2010),
Paper-Nr. 1.9.16,
8 S.
B. Harrer, J. Kastner, A. Kottar, H.P. Degischer:
"Charakterisierung von Inhomogenitäten in metallischen Gusswerkstoffen mittels 3D-Röntgen-Computertomographie";
Vortrag: DGZfP-Jahrestagung 2007,
Fürth/ Deutschland;
14.05.2007
- 16.05.2007; in: "ZfP in Forschung, Entwicklung und Anwendung",
Deutsche Gesellschaft für Zerstörungsfreie Prüfung e.V.,
(2007),
ISBN: 978-3-931381-98-1;
Paper-Nr. 94,
11 S.
B. Harrer, B. Plank, D. Moore, J. Kastner, H.P. Degischer:
"Röntgen-Computertomographie von Heterogenitäten in Eisenwerkstoffen";
Vortrag: Industrielle Computertomographie Tagung,
Wels/OÖ;
27.02.2008
- 28.02.2008; in: "Proceedings - Industrielle Computertomographie",
Shaker,
(2008),
ISBN: 978-3-8322-6949-4;
S. 89
- 95.
B. Harrer, W. Winkler, E. Pissenberger, J. Kastner, H.P. Degischer:
"Röntgen-Computertomographie zur Charakterisierung von Inhomogenitäten in Gussgefügen von Aluminium und Stahl";
Vortrag: 41. Metallographie- Tagung 2007,
Bremen/ Deutschland;
19.09.2007
- 21.09.2007; in: "Sonderbände der Praktischen Metallographie 39, Fortschritte in der Metallographie",
G Petzow (Hrg.);
(2007),
ISBN: 978-3-88355-362-7;
S. 131
- 136.
M. Hartmann, M. Pfaffinger, J. Stampfl:
"Lithography-Based Ceramic Manufacturing (LCM) for Dental Applications";
Vortrag: International Conference on Advanced Manufacturing and Materials,
Tokyo;
11.06.2018
- 13.06.2018; in: "Advanced Manufacturing and Materials",
Scientific.Net,
Materials Science Forum Volume 939
(2018),
ISBN: 978-3-0357-1404-3;
S. 95
- 103.
M. Hatzenbichler, R. Felzmann, S. Gruber, G. Mitteramskogler, P. Tesavibul, J. Stampfl, R. Liska:
"Additive Manufacturing of high performance ceramic structures";
Hauptvortrag: 4m 2012,
Wien;
09.10.2012
- 11.10.2012; in: "Multi-material Micro Manufacture",
H. Noll, N. Adamovic, S. Dimov (Hrg.);
Research Publishing,
(2012),
ISBN: 978-98107-3353-7;
S. 16
- 19.
M. Hatzenbichler, M. Geppert, S. Gruber, E. Ipp, R. Almedal, J. Stampfl:
"DLP based light engines for additive manufacturing of ceramic parts";
Vortrag: Proceedings of SPIE,
San Francisco;
23.01.2012
- 25.01.2012; in: "Emerging Digital Micromirror Based Systems and Applications IV",
M. Douglass, P. Oden (Hrg.);
SPIE,
8254
(2012),
S. 1
- 10.
C. Heller, X.H. Qin, M. Schwentenwein, G. Russmüller, F. Varga, R. Liska, J. Stampfl:
"3D-Photopolymere auf Basis vonPolyvinylalkohol: Von der Synthese zur in-vivo-Anwendung";
Vortrag: 4. Wiener Biomaterialsymposium,
Wien;
15.11.2010
- 17.11.2010; in: "Tagungsband",
J. Stampfl (Hrg.);
(2010),
S. 3.
C. Heller, M. Schuster, S. Baudis, C. Turecek, F. Varga, H. Bergmeister, G. Weigel, J. Stampfl, R. Liska:
"3d-Fabrication of Photopolymers as Scaffolds for Tissue Engineering using Rapid Prototyping";
Vortrag: 9th Austrian Polymer Meeting,
Graz, A;
26.03.2008
- 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts",
(2008),
S. 10.
C. Heller, M. Schuster, S. Baudis, C. Turecek, F. Varga, H. Bergmeister, G. Weigel, J. Stampfl, R. Liska:
"New Materials for 3D-Scaffolds for Tissue Engineering Applications";
Vortrag: TERMIS-EU 2008 Meeting,
Porto, P;
22.06.2008
- 28.06.2008; in: "Abstracts from TERMIS-EU 2008 Meeting",
Tissue Engineering, Part A,
Vol. 14 / No. 5
(2008),
ISSN: 1937-3341;
S. 761.
C. Heller, M. Schwentenwein, S. Baudis, R. Thaler, F. Varga, J. Stampfl, R. Liska:
"3D Fabrication of new poly(vinyl alcohol) based Scaffolds for Tissue Engineering";
Vortrag: RadTech Europe 2009,
Nizza, FR;
14.10.2009
- 15.10.2009; in: "Radtech Europe 2009, Proceedings",
(2009),
7 S.
C. Heller, M. Schwentenwein, S. Baudis, C. Turecek, F. Varga, J. Stampfl, R. Liska:
"3D Fabrication of new poly(vinyl alcohol) based scaffolds for Tissue Engineering and Regeneration";
Poster: International Workshop on Biomacromolecules 2008,
Stockholm, S;
01.06.2008
- 04.06.2008; in: "International Workshop on Biomacromolecules 2008, Book of Abstracts",
(2008).
C. Heller, M. Schwentenwein, S. Baudis, C. Turecek, F. Varga, J. Stampfl, R. Liska:
"Polyvinylalkohol basierende Photopolymere für die generative Fertigung von Gerüststrukturen für Tissue Engineering";
Vortrag: 3. Wiener Biomaterialsymposium,
Wien;
19.11.2008
- 21.11.2008; in: "3. Wiener Biomaterialsymposium - Tagungsband",
(2008),
ISBN: 978-3-200-01613-2;
S. 3.
C. Heller, M. Schwentenwein, R. Liska, J. Stampfl, F. Varga, M. Porodec, M. Schulz-Siegmund, G. Russmüller:
"New 3D-Biophotopolymers with Selective Surface-cell Interactions for Regnerative Medicine";
Vortrag: MRS Fall Meeting 2009,
Boston, MA, USA;
30.11.2009
- 03.12.2009; in: "E-MRS 2008 spring meeting",
(2009).
C. Heller, M. Schwentenwein, M. Porodec, M. Schulz-Siegmund, J. Stampfl, F. Varga, R. Liska:
"Poly(vinyl alcohol) based monomers for lithography-based 3D fabrication";
Vortrag: World Congress on Medical Physics and Biomedical Engineering,
München (eingeladen);
07.09.2009
- 12.09.2009; in: "IFMBE Proceedings",
O. Dössel, W. Schlegel (Hrg.);
25
(2009),
ISBN: 978-3-642-03897-6;
4 S.
C. Heller, M. Schwentenwein, N.U Pucher, K. Stadlmann, T. Koch, F. Varga, J. Stampfl, R. Liska:
"3D fabrication of new poly(vinyl alcohol) based Scaffolds for Tissue Engineering";
Poster: Radtech Europe Conference 2009,
Nizza;
14.10.2009
- 15.10.2009; in: "UV/EB- Sustainable Technology",
D. Helsby (Hrg.);
(2009).
C. Heller, M. Schwentenwein, F. Varga, R. Liska, J. Stampfl:
"Biocompatible and biodegradable photopolymers for microstereolithography";
Vortrag: 5th International Congress on Laser Advanced Materials Processing,
Kyoto (eingeladen);
29.06.2009
- 02.07.2009; in: "Proceedings of LAMP2009",
I. Miyamoto (Hrg.);
Japan Laser Processing Society,
Osaka
(2009),
Paper-Nr. #09-092,
5 S.
C. Heller, M. Schwentenwein, F. Varga, G. Russmüller, J. Stampfl, R. Liska:
"3D Fabrication of Poly(vinyl alcohol) based monomers";
Vortrag: 13. Österreichische Chemietage,
Wien;
24.08.2009
- 27.08.2009; in: "13. Österreichische Chemietage",
(2009),
ISBN: 978-3-900554-66-8.
M. Hochegger, H.P. Degischer, S. Ilie, P. Parteder:
"Hot Tensile Testing of plain C-Steels";
Vortrag: International Doctoral Seminar - Faculty of Materials Science and Technology STU in Trnava (TU Bratislava),
Smolenice/ Czech. Republic;
13.05.2007
- 16.05.2007; in: "Proceedings of International Doctoral Seminar 2007",
Trvana: Alumni Press,
(2007),
ISBN: 978-80-8096-011-7;
8 S.
M. Hochegger, J. Six, H.P. Degischer, S. Ilie, B. Harrer:
"Deformation of continuously cast Carbon Steels in the Range of γ-α Transformation";
Vortrag: 3rd International Conference on Thermomechanical Processing of Steels,
Padua;
10.09.2008
- 12.09.2008; in: "Thermomechanical Processing of Steels",
AIM (Hrg.);
(2008),
ISBN: 88-85298-66-4;
10 S.
F. Höller, A. Ovsianikov, J. Torgersen, T. Koch, D. Dekel, S. Levenberg, S. Nürnberger, H. Redl, R. Liska, J. Stampfl:
"Laser microfabrication of elastic 3D scaffolds";
Poster: 5. Wiener Biomaterialsymposium,
Wien;
19.11.2012
- 21.11.2012; in: "Abstracts 5th Biomaterialsymposium Vienna",
(2012),
S. 107
- 108.
K. Hölzl, M. Markovic, P. Gruber, J. Van Hoorick, S. Van Vlierberghe, P. Dubruel, R. Liska, A. Ovsianikov:
"Photosensitive gelatine-methacrylamide as engineered extracellular matrix for three-dimensional cell culture";
Poster: TERMIS-EU 2016 Conference,
Uppsala;
28.06.2016
- 01.07.2016; in: "Towards Future Regenerative Therapies",
European Cells and Materials Journal,
31
(2016),
ISSN: 1473-2262;
S. 215.
K. Hölzl, J. Van Hoorick, S. van Vlierberghe, P. Dubruel, R. Liska, H. Redl, S. Nürnberger, A. Ovsianikov:
"Photosensitive Gelatin-Methacrylamide in 3D cell culture";
Poster: Donau Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Donau Vltava Sava Polymer Meeting 2017",
Book of Abstract,
(2017),
S. PO-13.
A. Hofecker, P. Knaack, M. Markovic, T. Koch, A. Ovsianikov, R. Liska:
"New Approaches for the Synthesis of low toxic Monomers";
Poster: 5th European Symposium of Photopolymer Science,
Mulhouse, France;
03.09.2018
- 06.09.2018; in: "5th European Symposium of Photopolymer Science",
5th European Symposium of Photopolymer Science,
(2018),
S. PO12.
M. Hohlrieder, K. Cicha, A. Teuschl, M. van Griensven, H. Redl, J. Stampfl:
"Bioreactor and scaffold design for the mechanical stimulation of silk based anterior cruciate ligament grafts";
Poster: World Congress on Medical Physics and Biomedical Engineering,
München;
07.09.2009
- 12.09.2009; in: "IFMBE Proceedings",
O. Dössel, W. Schlegel (Hrg.);
25
(2009),
ISBN: 978-3-642-03897-6;
3 S.
M. Hohlrieder, J. Stampfl:
"Dauerfestigkeitsversuche mit künstlichen Bandmaterialien";
Poster: 3. Wiener Biomaterialsymposium,
Wien;
19.11.2008
- 21.11.2008; in: "3. Wiener Biomaterialsymposium - Tagungsband",
(2008),
ISBN: 978-3-200-01613-2;
S. 51.
D. Holec:
"Alloying trends from first principles - A case study of ternary and multinary nitrides";
Vortrag: 3rd International Conference on Nanotek and Expo,
Las Vegas (eingeladen);
02.12.2013
- 04.12.2013; in: "Book of Abstracts",
(2013).
D. Holec, M.A. Hartmann, O. Paris, P.H. Mayrhofer:
"Surface energy of carbon fullerenes and nanotubes; A multi-method density functional theory and monte carlo study";
Vortrag: 84th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM),
Novi Sad (eingeladen);
18.03.2013
- 22.03.2013; in: "Book of Abstracts",
(2013).
D. Holec, J. Keckes, P. Wagner, F. Tasnadi, M. Friak, P.H. Mayrhofer:
"Texture dependent elastic constants of polycrystalline Zr-Al-N predicted by Ab Initio calculations";
Vortrag: International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2013,
San Diego;
29.04.2013
- 03.05.2013; in: "Book of Abstracts",
(2013).
D. Holec, N. Koutná, F. Klimashin, P.H. Mayrhofer:
"Stabilisation of Cubic MoN and TaN Systems: The Role Point Defects";
Vortrag: 44th International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego;
24.04.2017
- 28.04.2017; in: "ICMCTF 2017",
(2017).
D. Holec, S. Zhang, W. Fu, C. Humphreys, P.H. Mayrhofer, M. Moram:
"Ab initio evaluation of the potential use of Sc-based III-nitrides in optoelectronics";
Vortrag: 41st International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego, CA;
28.04.2014
- 02.05.2014; in: "Book of abstracts",
(2014).
D. Holec, L. Zhou, P.H. Mayrhofer:
"Predictive power of electron energy los spectra modelled by first principles";
Poster: 41st International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego, CA;
28.04.2014
- 02.05.2014; in: "Book of abstracts",
(2014).
D. Holec, L. Zhou, R. Rachbauer, P.H. Mayrhofer:
"First principles study of alloying trends in Ti-Al-N and Cr-Al-N systems";
Poster: International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2013,
San Diego;
29.04.2013
- 03.05.2013; in: "Book of Abstracts",
(2013).
K. Holler, B. Reetz, K.B. Müller, A. Pyzalla, W. Reimers:
"Microstructure and Properties of Hot Extruded Brass CuZn40Pb2";
Vortrag: Thermec 2003,
Madrid-Leganes (eingeladen);
07.07.2003
- 11.07.2003; in: "Materials Science Forum",
Vols. 426 - 432
(2003),
ISSN: 0255-5476;
S. 3667
- 3672.
R. Hollerweger, M. Bartosik, M. Arndt, R. Rachbauer, P. Polcik, J. Paulitsch, D. Holec, P.H. Mayrhofer:
"On the structure and growth of reactive magnetron sputtered Ta2O5";
Vortrag: International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2013,
San Diego;
29.04.2013
- 03.05.2013; in: "Book of Abstracts ICMCTF 2013",
(2013).
R. Hollerweger, D. Holec, M. Arndt, R. Rachbauer, P. Polcik, J. Paulitsch, P.H. Mayrhofer:
"Chemical and Structural Design Concepts for Increasing the Oxidation Resistance of Ti-Al-N based Coatings";
Vortrag: International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2014,
San Diego, CA, USA;
27.04.2014
- 02.05.2014; in: "Abstract Book ICMCTF 2014",
(2014).
R. Hollerweger, H. Riedl, M. Arndt, R. Rachbauer, P. Polcik, J. Paulitsch, P.H. Mayrhofer:
"Oxide phase stabilization and high temperature oxidation resistance of Zr and Ta alloyed Ti-Al-N coatings";
Vortrag: 38th International Conference and Exposition on Advanced Ceramics and Composites,
Daytona Beach, Florida, USA;
27.01.2014
- 31.01.2014; in: "Abstratct Book of ICACC 2014",
Abstracts of the 38th International Conference and Exposition on Advanced Ceramics and Composites,
(2014).
R. Hollerweger, H. Riedl, M. Arndt, R. Rachbauer, P. Polcik, J. Paulitsch, P.H. Mayrhofer:
"Phase stability, thermal stability and oxidation resistance of arc-evaporated Ti-Al-Ta-N coatings";
Poster: International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2013,
San Diego;
29.04.2013
- 03.05.2013; in: "Book of Abstracts ICMCTF 2013",
(2013).
R. Hollerweger, H. Riedl, M. Arndt, R. Rachbauer, P. Polcik, J. Paulitsch, P.H. Mayrhofer:
"Phase stability, thermal stability and oxidation resistance of arc-evaporated Ti-Al-Ta-N coatings";
Poster: Plansee Seminar 2013,
Reutte;
03.06.2013
- 07.06.2013; in: "Proceedings of the 18th Plansee Seminar 2013",
(2013),
S. 2041
- 2048.
R. Hollerweger, L. Zhou, D. Holec, R. Rachbauer, P. Polcik, P.H. Mayrhofer:
"Structure and Mechanical Properties of Ta alloyed Cr-Al-N coatings";
Poster: International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2014,
San Diego, CA, USA;
27.04.2014
- 02.05.2014; in: "Abstract Book ICMCTF 2014",
(2014).
B. Holzer, D. Lumpi, M. Tromayer, P. Gruber, E. Horkel, A. Ovsianikov, R. Liska, J. Fröhlich:
"Initiators For Two Photon Induced Polymerization Based On A Novel Cap-Linker-Cap System";
Poster: 3rd European Symposium of Photopolymer Science,
Vienna;
09.09.2014
- 12.09.2014; in: "European Symposium of Photopolymer Science - Abstract Book",
(2014),
ISBN: 978-3-9502992-9-8;
S. PO-37.
B. Holzer, M. Tromayer, D. Lumpi, A. Ajami, E. Horkel, W. Husinsky, A. Ovsianikov, R. Liska, J. Fröhlich:
"Cap-Linker-Cap Systems as Initiators for Two-Photon Induced-Polymerization";
Poster: LPM 2014,
Vilnius;
17.06.2014
- 20.06.2014; in: "LPM 2014 Program & Technical Digest",
(2014),
S. 260.
I. Holzer, E. Kozeschnik, H. Cerjak:
"A numerical approach to predict the long-term creep behaviour and precipitate back-stress evolution of 9-12% Cr steels";
Vortrag: Liege Conference: Materials for Advanced Power Engineering 2010,
Liege, Belgium;
27.09.2010
- 29.09.2010; in: "Materials for Advanced Power Engineering",
(2010),
S. 1077
- 1087.
I. Holzer, E. Kozeschnik, H. Cerjak:
"Computational Modeling Of The Strength Evolution During Processing And Service Of 9-12% Cr Steels";
Vortrag: Proc. Fifth Int. Conf. Mathematical Modeling and Computer Simulation of Material Technology,
Ariel, Israel;
08.09.2008
- 12.09.2008; in: "Proc. Fifth Int. Conf. Mathematical Modeling and Computer Simulation of Material Technology",
(2008),
S. 14
- 22.
I. Holzer, P. Mayr, B. Sonderegger, E. Kozeschnik, H. Cerjak:
"Simulation And Validation Of The Evolution Of Precipitates During Production And Fabrication Of A Complex Martensitic 9 Wt.% Cr Steel";
Vortrag: 17th International Conference "Computer Technology in Welding and Manufacturing",
Cranfield, UK;
18.06.2008
- 19.06.2008; in: "17th International Conference "Computer Technology in Welding and Manufacturing"",
(2008),
Paper-Nr. Session 1A, paper 11,
10 S.
J. Homa, J. Stampfl:
"Fabrication of Cellular Ceramic Structures by Gelcasting and Rapid Prototyping";
Poster: Junior Scientist Conference 2006,
Wien;
19.04.2006
- 21.04.2006; in: "Junior Scientist Conference 2006. Proceedings",
(2006),
ISBN: 3-902463-05-8;
S. 129
- 130.
J. Homa, J. Stampfl:
"Fabrication of Ceramic Cross Flow Filters with Solid Freeform Fabrication";
Vortrag: 2nd International Conference on Additive Technologies,
Ptuj, Slowenien;
17.09.2008
- 19.09.2008; in: "Proceedings of the 2nd International Conference on Additive Technologies",
DAAM International,
Vienna
(2008),
ISBN: 390150972-0;
2 S.
J. Homa, S. Zellhofer, A. Liersch, J. Stampfl:
"R-SiC for Novel Gel-cast Cross Flow Filter";
Vortrag: 32nd International Conference & Exposition on Advanced Ceramics & Composites,
Daytona Beach, Fl, USA;
27.01.2008
- 01.02.2008; in: "Proceedings of the 32nd International Conference & Exposition on Advanced Ceramics & Composites",
(2008),
ISBN: 978-0-470-40833-9;
13 S.
J. Homa, S. Zellhofer, A. Liersch, J. Stampfl:
"Solid Freeform Fabrication Of Monolithic Cross Flow Filters For Diesel Particulate Filtration";
Vortrag: 2nd International Congress On Ceramics,
Verona;
29.06.2008
- 04.07.2008; in: "2nd International Congress On Ceramics Global Roadmap For Ceramics Icc2 Proceedings",
ISTEC-CNR, Institute of Science and Technology for Ceramics,
(2008),
ISBN: 978-88-8080-084-2;
Paper-Nr. 5-O13-ID 268,
6 S.
J. Homa, S. Zellhofer, J. Stampfl:
"Novel Fabrication Technique for Ceramic Filters";
Vortrag: 10th International Conference of the European Ceramic Society,
Berlin, Deutschland;
17.06.2007
- 21.06.2007; in: "Proceedings of the 10th International Conference of the European Ceramic Society",
Göller Verlag GmbH,
Baden-Baden
(2007),
ISBN: 3-87264-022-4;
6 S.
P. Homporova, C. Poletti, M. Stockinger, F. Warchomicka:
"Dynamic phase evolution in titanium alloy Ti-6Al-4V";
Vortrag: Ti-2011 The 12th World Conference on Titanium,
Beijing - China;
19.06.2011
- 24.06.2011; in: "Ti-2011",
(2011).
P. Homporova, C. Poletti, F. Warchomicka, M. Stockinger:
"Isotherme Entwicklung der Morfologie der Phasen α+β in Ti 6Al 4V";
Vortrag: 43. Metallographie-Tagung 2009 Materialographie,
Deutschland;
16.08.2009
- 18.08.2009; in: "Metallographie-Tagung 2009",
(2009),
S. 305
- 310.
E. Horkel, B. Holzer, M. Lunzer, D. Lumpi, M. Tromayer, P. Gruber, A. Ovsianikov, R. Liska, J. Fröhlich:
"Cap-Linker-Cap Systems As Initiators For Two-Photon Induced Polymerization: A Theoretical Approach";
Poster: 3rd European Symposium of Photopolymer Science,
Vienna;
09.09.2014
- 12.09.2014; in: "3rd European Symposium of Photopolymer Science - Abstract Book",
(2014),
ISBN: 978-3-9502992-9-8;
S. PO-38.
T. Huber, H.P. Degischer:
"Bestimmung der elastischen Konstanten von Al-SiCp Metall-Matrix-Verbundwerkstoffen mittels dynamischer Messverfahren";
Vortrag: Werkstoffprüfung 2002,
Bad Nauheim;
05.12.2002
- 06.12.2002; in: "Kennwertermittlung für die Praxis",
H. Frenz, A. Wehrstedt (Hrg.);
Wiley-VCH,
Weinheim
(2002),
S. 293
- 299.
T. Huber, H.P. Degischer, G. Lefranc, T. Schmitt:
"Thermisches Ausdehungsverhalten von Al-SiC#{p} Metall-Matrix-Verbundwerkstoffen für Trägerplatten elektronischer Bauteile";
Vortrag: 14. DGM Symposium Verbundwerkstoffe und Werkstoffverbunde,
Wien;
02.07.2003
- 04.07.2003; in: "Verbundwerkstoffe",
H.P. Degischer (Hrg.);
Wiley-VCH Verlag,
Weinheim
(2003),
ISBN: 3-527-30762-1;
S. 834
- 839.
T. Huber, H.P. Degischer, T. Schmitt, G. Lefranc:
"Thermal Expansion Behavior of Aluminum-Matrix Composites with SiC Particulates for Electronic Packaging";
Vortrag: 10th U.S.-Japan Conference on Composite Materials,
Stanford;
16.09.2002
- 18.09.2002; in: "Proceedings of the tenth U.S.-Japan Conference on Composite Materials",
C. Fu-Kuo (Hrg.);
(2002),
S. 596
- 606.
W. Hübner, K. Aßmus, A. Pyzalla, H. Pinto:
"Das Gefüge austenitischer FeCrNi-Legierungen nach tribologischer Beanspruchung bei tiefen Temperaturen";
Vortrag: 37. Metallographie-Tagung 2003,
Berlin (Deutschland);
17.09.2003
- 19.09.2003; in: "Fortschritte in der Metallographie. Sonderbände der Praktischen Metallographie 35",
Werkstoff-Informationsgesellschaft,
Band 35
(2003),
ISBN: 3-88355-322-0;
S. 399
- 404.
W. Hübner, K. Assmus, A. Pyzalla, H. Pinto:
"Hydrogen uptake in stainless steels at low temperatures";
Vortrag: HYPOTHESIS V, Hydrogen Power Theoretical and Engineering Solutions Int. Symp.,
Porto Conte, Italy;
07.09.2003
- 10.09.2003; in: "Proceedings of HYPOTHESIS V",
(2003),
ISBN: 88-86281-90-0;
8 S.
W. Hübner, T. Gradt, K. Assmus, A. Pyzalla, H. Pinto, S. Stuke:
"Hydrogen Absorption by Steels during Friction";
Vortrag: Hydrogen and Fuel Cells 2003 Conference and Trade Show,
Vancouver, Canada;
08.06.2003
- 11.06.2003; in: "Proceedings of the Hydrogen and Fuel Cells 2003 Conference and Trade Show",
(2003),
11 S.
B. Husar, A. Mautner, C. Heller, P. Esfandiari, F. Varga, J. Stampfl, R. Liska:
"Low toxic alternatives to (meth)acrylates: Vinyl esters, vinyl carbonates, and vinyl carbamates";
Vortrag: RadTech Asia 2013,
Shanghai;
20.05.2013
- 24.05.2013; in: "Guide Book",
(2013).
B. Husar, A. Mautner, C. Heller, M. Schwentenwein, F. Varga, T. Koch, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"3D scaffolds from low toxic vinyl carbonates";
Poster: 5th Biomaterialsymposium,
Vienna;
19.11.2012
- 21.11.2012; in: "Abstracts",
J. Stampfl (Hrg.);
(2012),
S. 105.
B. Husar, A. Mautner, C. Heller, F. Varga, T. Koch, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"Biodegradable Bone Replacement Material From Low Cytotoxic Monomers";
Poster: TERMIS-EU 2013,
Istanbul;
17.06.2013
- 20.06.2013; in: "Abstracts",
(2013),
S. 244.
B. Husar, A. Mautner, C. Heller, F. Varga, T. Koch, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"Vinyl Carbonates and Vinyl Esters: From Synthesis to In Vivo Testing of Bone Replacement Material";
Vortrag: 25th European Conference on Biomaterials,
Madrid;
08.09.2013
- 12.09.2013; in: "Book of contributions",
(2013),
ISBN: 978-84-695-7831-5.
B. Husar, A. Samusjew, T. Koch, J. Stampfl, R. Liska:
"3D fabrication of scaffolds from low cytotoxic vinylester and thiols";
Poster: TERMIS/EU 2014,
Genova;
10.06.2014
- 13.06.2014; in: "Meeting Abstracts",
J Tissue Eng Regen Med,
8 (Suppl. 1)
(2013),
ISSN: 1932-7005;
S. 447.
B. Husar, A. Samusjew, A. Mautner, C. Heller, F. Varga, T. Koch, K. Macfelda, G. Russmüller:
"Bone replacement material based on low toxic alternatives to meth(acrylates)";
Vortrag: Perviy Natzionalniy Kongress Po Regenerativnoy Meditzine,
Moskau (eingeladen);
04.12.2013
- 06.12.2013; in: "Materialy Kongressa / Материалы Конгресса / Congress Materials",
MEDI Ekspo,
(2013),
ISBN: 978-5-906484-05-5;
S. 3.
B. Husar, M. Schwentenwein, C. Heller, A. Mautner, F. Varga, G. Russmüller, J. Stampfl, R. Liska:
"Biocompatible and biodegradable photopolymers from low cytotoxic vinyl esters";
Poster: RadTech Europe 2011,
Basel, CH;
18.10.2011
- 20.10.2011; in: "RadTech Europe 2011 - Abstract Book",
(2011),
S. 118.
B. Husar, M. Schwentenwein, C. Heller, F. Varga, G. Russmüller, J. Stampfl, R. Liska:
"Biomaterials based on low cytotoxicity vinyl esters for bone replacement application";
Poster: 4. Wiener Biomaterialsymposium: Von der Werkstoffentwicklung bis zur klinischen Anwendung,
TU Wien, Wien;
15.11.2010
- 17.11.2010; in: "Tagungsband",
(2010),
S. 57.
B. Husar, M. Schwentenwein, C. Heller, F. Varga, G. Russmüller, J. Stampfl, R. Liska:
"Vinyl carbonates as low cytotoxicity monomers for fabrication of biocompatible 3d scaffolds";
Poster: European Symposium of Photopolymer Science,
Mulhouse, France;
28.11.2010
- 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book",
(2010).
B. Illerhaus, E. Jasiuniene, A. Kottar:
"3D Micro Tomography (µCT) of Cellular Metals using an up to 320 kV X-ray Tube ";
Vortrag: Processing and Properties of Lightweight Cellular Metals and Structures,
Seattle, WA. (USA);
17.02.2002
- 21.02.2002; in: "Processing and Properties of Lightweight Cellular Metals and Structures",
TMS,
(2002),
ISBN: 0-87339-527-1;
S. 271
- 280.
F. Imtiaz, E. Kozeschnik:
"Experimental and Theoretical Analysis of Isothermal Austenite Decomposition in Low and Ultra-Low Carbon Steel";
Vortrag: 10. Werkstofftagung TU GRAZ,
IWS, TU Graz, Graz;
28.02.2008; in: "Verarbeitungs-und Gebrauchseigenschaften von Werkstoffen-Heute and Morgen",
(2008),
ISBN: 978-3-85125-001-5;
S. 95
- 96.
R. Inführ, C. Fritscher, R. Liska, H. Lichtenegger, J. Stampfl, N. Hüsing:
"Fabrication of Bio-Inspired Ceramic Composites Using Soluble Photopolymers asMmold Materials";
Poster: Euromat 2005,
Prag;
05.09.2005
- 08.09.2005; in: "Euromat 2005 European Congress on Advanced Materials and Processes",
http://www.dgm.de/past/2005/euromat2005/programme/
(2005),
Paper-Nr. P618,
1 S.
R. Inführ, C. Fritscher, V. Schmidt, L. Kuna, R. Liska, H. Lichtenegger, J. Stampfl:
"Structuring methods capable of building 3D parts with feature resolutions from 50 µm to 100 nm";
Poster: Junior Scientist Conference 2006,
Wien;
19.04.2006
- 21.04.2006; in: "Junior Scientist Conference 2006. Proceedings",
(2006),
ISBN: 3-902463-05-8;
S. 131
- 132.
R. Inführ, H. Lichtenegger, C. Fritscher, J. Stampfl, R. Liska:
"3D Lithography of organo-soluble mold materials";
Poster: 7th Austrian Polymer Meeting,
Graz, Austria;
04.07.2005
- 06.07.2005; in: "7th Austrian Polymer Meeting - Final Program",
(2005),
S. 67.
R. Inführ, H. Lichtenegger, J. Stampfl, R. Liska, C. Fritscher, N. Hüsing:
"3D Microstereolithography of soluble mold materials";
Vortrag: 31st International Conference on Micro- and Nano-Engineering 2005,
Vienna;
19.09.2005
- 22.09.2005; in: "31st International Conference on Micro- and Nano-Engineering 2005 - Abstracts",
(2005),
S. 9D_04.
R. Inführ, R. Liska, H. Lichtenegger, C. Fritscher, J. Stampfl, N. Hüsing:
"3D Lithography of Organo-Soluble Mold Materials for Sol-Gel Nanocomposites";
Poster: Radtech Europe 2005: Exhibition and Conference,
Barcelona;
18.10.2005
- 20.10.2005; in: "RadTech Europe 2005 Conference Proceedings Volume II",
Radtech Europe Association,
(2005),
ISBN: 3-87870-330-9;
S. 487
- 492.
R. Inführ, N. Pucher, C. Heller, H. Lichtenegger, V. Schmidt, V. Satzinger, L. Kuna, A. Haase, J. Stampfl, R. Liska:
"Refractive Index Patterning of Polymeric Waveguide Materials";
Poster: RadTech Europe 2007 - Europe´s event for UV/EB curing, Vienna 13-15 Nov 2007,
Wien;
13.11.2007
- 15.11.2007; in: "RadTech Europe 2007 - Conference Proceedings",
(2007),
7 S.
R. Inführ, N.U Pucher, H. Lichtenegger, R. Liska, V. Schmidt, V. Satzinger, N. Galler, K. Stadlmann, J. Stampfl:
"Refractive Index Patterning of Flexible Waveguide Materials by Means of Two‑Photon 3D Lithography";
Poster: Viennano'09 - 3rd Vienna International Conference Nano-Technology,
Vienna;
18.03.2009
- 20.03.2009; in: "Nano-Technology",
W.J. Bartz (Hrg.);
(2009),
ISBN: 978-3-901657-32-0;
S. 503
- 508.
R. Inführ, J. Stampfl, S. Krivec, R. Liska, H. Lichtenegger, V. Satzinger, V. Schmidt, N. Matsko, W. Grogger:
"3D-structuring of optical waveguides with two photon polymerization";
Vortrag: 2009 MRS Spring Meeting,
San Francisco, USA;
14.04.2009
- 17.04.2009; in: "Material Systems and Processes for Three-Dimensional Micro- and Nanoscale Fabrication and Lithography",
S. Kuebler, V. Milam (Hrg.);
1179E
(2009),
Paper-Nr. 1179-BB01-07,
7 S.
R. Jancek, A. Kottar, H.P. Degischer:
"Cellular aluminium for passive crash protection";
Vortrag: International Conference on Cellular Metals and Metal Foaming Technology,
Berlin, D;
23.06.2003
- 25.06.2003; in: "Cellular Metals: Manufacture properties applications",
J. Banhart, N. A. Fleck, A. Mortensen (Hrg.);
Verlag Metall Innovation Technologie MIT,
(2003),
ISBN: 3-935538-12-x;
S. 19
- 24.
R. Jancek, A. Kottar, B. Kriszt, H.P. Degischer:
"Cellular Aluminium Foam Panels under Tensile Loading ";
Vortrag: International Conference Advanced Metallic Materials 2003,
Smolenice Castle (Slovakia);
05.11.2003
- 07.11.2003; in: "Proc. of the Int. Conference Advanced Metallic Materials",
Institute of Materials & Machine Mechanics, Slovak Academy of Sience,
(2003),
ISBN: 80-969011-7-6;
S. 132
- 134.
R. Jancek, A. Kottar, B. Kriszt, H.P. Degischer:
"Damage and strain hardening during tensile loading of foamed aluminium ";
Poster: DECHEMA/VCI-GVC-Symposium: Schäume - Grundlagen und Anwendungen,
Baden-Baden;
16.11.2004
- 17.11.2004; in: "DECHEMA/VDI-GVC-Symposium: Schäume-Grundlagen und Anwendungen. Tagungsband",
DECHEMA Gesellschaft für chemische Technik und Biotechnologie e.V.,
(2004),
S. 51.
M. Jenni, R. Zauner, J. Stampfl, J. Morris:
"Quantitative study of process and material parameters on flow behavior and powder binder separation of feedstocks: Experimental design, 3D simulation model and balance model for separation in suspensions";
Vortrag: 2008 World Congress on Powder Metallurgy & Particulate Materials,
Washington;
08.06.2008
- 12.06.2008; in: "Advances in Powder Metallurgy & Particulate Materials",
(2008),
ISBN: 978-0-9793488-9-1;
Paper-Nr. 1-169,
10 S.
J. Jung, E. Kozeschnik, S. Han, B. de Cooman:
"Static Strain Aging in Fe-Mn-N Alloys Investigated by Impulse Excitation Internal Friction Analysis";
Vortrag: 16th International Conference on Internal Friction and Mechanical Spectroscopy (ICIFMS-16),
Lausanne;
03.07.2011
- 08.07.2011; in: "Internal Friction And Mechanical Spectroscopy",
Solid State Phenomena,
184
(2012),
ISSN: 1012-0394;
S. 203
- 208.
K. Kalinyaprak-Icten, S. Knaus, T. Koch:
"Gelatinization Properties and Surface Morphology of Hydrophobically Modified Tapioca Starch";
Poster: 9th Austrian Polymer Meeting,
Graz, A;
26.03.2008
- 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts",
(2008),
S. 110.
S. Kaltmann, A. Schnabl, M. Seitzberger, H.P. Degischer:
"Bestimmung der Materialeigenschaften in der Wärmeausbreitungszone S355J2 und AlMgSi 0.6";
Vortrag: JOIN-EX 2008 - Internationaler Fachkongress der Schweiss- und Verbindungstechnik,
Congress Center Wien;
09.10.2008
- 10.10.2008; in: "Proceedings JOIN-EX 2008",
(2008).
S. Kaltmann, A. Schnabl, M. Seitzberger, H.P. Degischer:
"Strain fields of tensile and shear loaded weldments of AlMgSi0.6 extrusions";
Vortrag: Int. Conf. on Safety and Reliability of Welded Components in Energy and Processing Industry,
Graz;
10.07.2008
- 11.07.2008; in: "Safety and Reliability of Welded Components in Energy and Processing Industry - Proceedings of the IIW International Conference, 10-11 July 2008",
(2008),
ISBN: 978-3-85125-019-0;
S. 567
- 570.
F. Kamleitner, B. Duscher, T. Koch, V. Archodoulaki:
"Successive self-nucleation and annealing as smart tool for characterization of chemical- and mechanical modified polypropylenes";
Poster: DVSPM 2015,
Gmunden;
11.05.2015
- 13.05.2015; in: "Danube Vltava Sava Polymer Meeting - DVSPM 2015",
Trauner Verlag,
(2015),
ISBN: 9783990334911;
S. 107.
F. Kamleitner, B. Duscher, T. Koch, V. Archodoulaki:
"Upcycling of polypropylene - the influence of polymeric impurities on the mechanical properties";
Vortrag: Modest 2016, 9th International Conference on Modification Degradation and Stabilisation of Polymers,
Krakau;
04.09.2016
- 09.09.2016; in: "Modest 2016, 9th International Conference on Modification Degradation and Stabilisation of Polymers",
(2016),
ISBN: 9788392562733;
S. 129.
F. Kamleitner, B. Duscher, T. Koch, S. Knaus, V. Archodoulaki:
"Chemical modification of polypropylene post-consumer waste by reactive extrusion as an innovative upocycling process";
Vortrag: Polymer Processing Society Conference 2015,
Graz;
21.09.2015
- 25.09.2015; in: "Regional Conference Polymer Processing Society Graz 2015",
Graz
(2015),
S. 333.
F. Kamleitner, B. Duscher, T. Koch, S. Knaus, V. Archodoulaki:
"Innovative upcycling of polypropylene";
Vortrag: Polymertec16,
Merseburg;
14.06.2016
- 17.06.2016; in: "Polymertec16",
(2016),
S. 28.
F. Kamleitner, B. Duscher, T. Koch, S. Knaus, V. Archodoulaki:
"Long Chain Branching as an innovative tool for the up-cycling of Polypropylene post-consumer waste";
Poster: DVSPM 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017 DVSPM",
Austria
(2017),
ISBN: 978-3-9504017-6-9;
S. PO-2.
F. Kamleitner, B. Duscher, T. Koch, S. Knaus, V. Archodoulaki:
"Melt functionalisation of polypropylene as an innovative up-cycling process";
Poster: EUROMAT 2017,
THESSALONIKI;
17.09.2017
- 22.09.2017; in: "EUROMAT 2017",
EUROMAT 2017,
(2017),
Paper-Nr. A3-P-TUE-P1-5,
1 S.
E. Karaagac, V. Archodoulaki, B. Duscher:
"Rheological Studies Of Pp/pe Layers And Pp/pe Blends With Compatibilisizers";
Poster: DVSPM 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017 DVSPM",
Austria
(2017),
ISBN: 978-3-9504017-6-9;
S. PO-38.
F. Klimashin, M. Arndt, P. Polcik, H. Euchner, N. Koutná, D. Holec, P.H. Mayrhofer:
"Hard nitrides based on the refractory Mo and W";
Poster: Plansee Seminar 2017,
Reutte;
29.05.2017
- 02.06.2017; in: "Plansee Seminar 2017",
(2017),
S. 81.
F. Klimashin, M. Arndt, P. Polcik, H. Euchner, N. Koutná, D. Holec, P.H. Mayrhofer:
"Improvement of Thermal Stability and Oxidation Resistance of Molybdenum Nitride";
Vortrag: 44th International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego;
24.04.2017
- 28.04.2017; in: "ICMCTF 2017",
(2017).
F. Klimashin, M. Arndt, P. Polcik, N. Koutná, H. Riedl, C.M. Koller, H. Euchner, D. Holec, P.H. Mayrhofer:
"The Power Of Vacancies In Transition Metal Nitrides";
Vortrag: VEIT 2017,
Sosopol, Bulgarien (eingeladen);
25.09.2017
- 29.09.2017; in: "Twentieth International Summer School On Vacuum, Electron And Ion Technologies",
(2017),
S. 53.
F. Klimashin, M. Arndt, P. Polcik, L. Lobmaier, N. Koutná, D. Holec, P.H. Mayrhofer:
"Vacancies in MONTAN - a mechanism for tuning hardness-toughness relationship";
Poster: 44th International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego;
24.04.2017
- 28.04.2017; in: "ICMCTF 2017",
(2017).
F. Klimashin, H. Euchner, P.H. Mayrhofer:
"Nitrogen vacancies - a key factor in synthesis of Mo-Al-N hard coatings";
Vortrag: 43rd International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego (USA);
25.04.2016
- 29.04.2016; in: "ICMCTF 2016",
(2016),
S. 25.
F. Klimashin, H. Euchner, P.H. Mayrhofer:
"Synthesis of super-hard Mo-Al-Cr-N coatings: ab initio guided empirical approach";
Vortrag: 15th International Conference on Plasma Surface Engineering,
Garmisch-Partenkirchen;
12.09.2016
- 16.09.2016; in: "15th International Conference on Plasma Surface Engineering",
(2016),
S. 21.
F. Klimashin, H. Riedl, J. Paulitsch, P.H. Mayrhofer:
"Impact of molybdenum on structure, mechanical and tribological properties and thermal stability of Cr1-xAlxN coatings";
Poster: 14th International Conference on Plasma Surface Engineering,
Garmisch-Partenkirchen;
16.09.2014
- 19.09.2014; in: "Book of Abstracts",
(2014),
S. 100.
M Knausz, G Oreski, K Berger, G Eder, Y Voronko, T. Koch, G. Pinter:
"Reliability testing of backsheets: comparison between module and free aged films";
Poster: 29th European Photovoltaic Solar Energy Conference and Exhibition,
Amsterdam;
22.09.2014
- 26.09.2014; in: "EU PVSEC Proceedings",
(2014),
ISBN: 3-936338-34-5;
Paper-Nr. 5BV.4.4.
T. Koch, C. Hollinsky, S. Sandberg, K. Hollinsky, S. Seidler:
"Mechanical behaviour of meshes used in hernia surgery";
Poster: 1st Joint Austrian & Slovenian Polymer Meeting ASPM 2008 and 9th Austrian Polymer Meeting,
Graz;
26.03.2008
- 28.03.2008; in: "ASPM 2008 - 9th Austrian Polymer Meeting",
(2008),
S. 64.
T. Koch, C. Hollinsky, S. Sandberg, K. Hollinsky, S. Seidler:
"Mechanisches Verhalten von Netzen für die Hernienchirurgie";
Poster: 3. Wiener Biomaterialsymposium,
Wien;
19.11.2008
- 21.11.2008; in: "3. Wiener Biomaterialsymposium, Tagungsband",
(2008),
ISBN: 978-3-200-01613-2;
S. 53.
T. Koch, F. R. Kogler, R. Potzmann, U. Schubert, S. Krivec, R. Liska, H. Lichtenegger, S. Seidler:
"Charakterisierung des mechanischen Verhaltens von organisch-anorganischen Hybridwerkstoffen mittels Eindruckprüfungen";
Vortrag: 13. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Halle-Merseburg;
29.06.2011
- 01.07.2011; in: "13. Problemseminar Deformation und Bruchverhalten von Kunststoffen",
(2011),
5 S.
T. Koch, F.R. Kogler, U. Schubert, S. Seidler:
"Characterization of Organic-Inorganic Hybrid Materials by Indentation Techniques";
Vortrag: Polymerwerkstoffe 2006,
Martin-Luther-Universität, Halle-Wittenberg, Deutschland;
27.09.2006
- 29.09.2006; in: "Polymerwerkstoffe 2006",
(2006),
S. 29.
T. Koch, F.R. Kogler, U. Schubert, S. Seidler:
"Mechanical and thermal properties of polystyrene crosslinked with a multifunctional zirkonium oxo cluster";
Vortrag: Chemical Congress 2008 "Chemistry for Sustainable Development",
Kathmandu, Nepal (eingeladen);
23.05.2008
- 25.05.2008; in: "Chemical Congress 2008",
(2008),
ISBN: 978-9937-2-0535-1;
S. 84.
T. Koch, F.R. Kogler, U. Schubert, S. Seidler:
"Mechanical Properties of Organic-Inorganic Hybrid Materials Determined by Indentation Techniques";
Vortrag: 8th Austrian Polymer Meeting,
Johannes Kepler University Linz, Austria;
20.09.2006
- 22.09.2006; in: "The Chain of Knowlegde - From Catalyst to Application",
K. Vincze-Minya, A. Schausberger (Hrg.);
(2006).
T. Koch, R. Lach, S. Seidler:
"About the possibilities to reduce the necessary material mass in Essential Work of Fracture of polymers";
Vortrag: 12th International Conference on Fracture,
Ottawa;
12.07.2009
- 17.07.2009; in: "Proceedings",
(2009),
Paper-Nr. T37.011,
9 S.
T. Koch, R. Lach, S. Seidler:
"Influence of the Specimen Geometry on the Essential Work of Fracture of Polypropylene Materials";
Poster: 5th Intern. Conf. on Fracture of Polymers, Composites and Adhesives,
Les Diablerets;
07.09.2008
- 11.09.2008; in: "5th Intern. Conf. on Fracture of Polymers, Composites and Adhesives",
European Structural Integrity Society,
Les Diablerets
(2008).
T. Koch, R. Lach, S. Seidler:
"Möglichkeiten zur Reduzierung der eingesetzten Werkstoffmenge für die EWF-Methode";
Poster: 12. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Merseburg;
24.06.2009
- 26.06.2009; in: "Tagungsband 12. Problemseminar",
(2009),
6 S.
T. Koch, M Palmstingl, D. Salaberger, M. Arikan, R. Klawatsch, P. Fischer, J. Karigl, T. Paier:
"Fatigue behaviour of short-fibre reinforced polypropylene described by experiment and simulation";
Poster: Polychar 22,
Stellenbosch;
08.04.2014
- 11.04.2014; in: "Polychar 22",
(2014),
S. 25.
T. Koch, M Palmstingl, D. Salaberger, M. Arikan, R. Klawatsch, P. Fischer, J. Karigl, T. Paier:
"Fatigue behaviour of short-fibre reinforced polypropylene described by experiment and simulation";
Vortrag: Internationale wissenschaftliche Tagung Polymerwerkstoffe, Polymertec 2014,
Merseburg;
25.06.2014
- 27.06.2014; in: "Polymertec 14",
(2014),
4 S.
T. Koch, D. Salaberger, M Palmstingl, M Schoßig:
"Deformation of short fibre reinforced polymers: Correlation between results obtained by acoustic emission and X-ray computed tomography";
Poster: Polymeric Materials 2012,
Halle (Saale);
12.09.2012
- 14.09.2012; in: "Abstracts",
(2012),
ISBN: 978-3-86829-517-7;
S. 135.
T. Koch, D. Salaberger, M Palmstingl, M Schoßig:
"Deformation of short fibre reinforced polypropylene: correlation between acoustic emission and X-‐ray computed tomography";
Poster: Austrian - Slovenian Polymer Meeting - ASPM 2013,
Bled;
03.04.2013
- 05.04.2013; in: "The Proceedings of the Austrian - Slovenian Polymer Meeting - ASPM 2013",
(2013),
ISBN: 978-961-269-992-5;
2 S.
T. Koch, S. Seidler:
"Application of instrumented micro and nano indentation testing in the field of polymer research";
Vortrag: Indo-Austrian Symposium on Advanced Materials Engineering IASAME 2010,
Hyderabad (eingeladen);
08.12.2010
- 09.12.2010; in: "IASAME 2010",
(2010),
S. 37
- 38.
T. Koch, S. Seidler:
"Correlations of Indentation Hardness and Yield Stress in Polymers";
Vortrag: 13th International Conference on Experimental Mechanics,
Alexandroupolis, Greece (eingeladen);
01.07.2007
- 06.07.2007; in: "Experimental Analysis of Nano and Engineering Materials and Structures",
E.E. Gdoutos (Hrg.);
(2007),
ISBN: 978-1-4020-6238-4;
6 S.
T. Koch, S. Seidler:
"Härte-Fließspannungs-Zusammenhänge in Kunststoffen";
Vortrag: 11. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Merseburg;
20.06.2007
- 22.06.2007; in: "11. Problemseminar "Deformation und Bruchverhalten von Kunststoffen"",
(2007),
6 S.
T. Koch, S. Seidler:
"Influence of crystallization conditions on micro hardness and indentation modulus of PP/PE-HD blends";
Vortrag: 13. International Conference Polymeric Materials 2008,
Halle;
24.09.2008
- 26.09.2008; in: "Polymeric Materials 2008",
(2008),
ISBN: 978-3-940744-17-3;
S. A09.
T. Koch, S. Seidler:
"Influence of crystallization temperature and annealing on the microhardness of alpha - and ß - phases of iPP and E/P-copolymer";
Poster: 6th Austrian Polymer Meeting,
Wien (Austria);
15.09.2003
- 17.09.2003; in: "6th Austrian Polymer Meeting, Wien (Austria)",
(2003),
S. 162.
T. Koch, S. Seidler:
"Influence of Crystallization Temperature and Annealing on the Microhardness of alpha - and ß - Phases of iPP and E/P-Copolymer";
Poster: Polymer Crystallization and Structure Formation in Pocessing - 20 Years of Fundamental and Applied Research in Linz (PC2003),
Linz (Austria);
19.09.2003
- 20.09.2003; in: "Polymer Crystallization and Structure Formation in Processing - 20 Years of Fundamental and Applied Research in Linz (PC2003)",
Linz (Austria)
(2003),
S. 1
- 9.
T. Koch, S. Seidler:
"Korrelationen von Eindringhärte und Fließspannung in Kunststoffen";
Poster: Werkstoffprüfung 2005,
Berlin (Germany);
01.12.2005
- 02.12.2005; in: "Tagungsband Werkstoffprüfung 2005: Herausforderungen neuer Werkstoffe an die Forschung und Werkstoffprüfung (DVM Bericht 641)",
W. Grellmann (Hrg.);
DVM,
(2005),
ISSN: 1861-8154;
S. 333
- 338.
T. Koch, S. Seidler:
"Morphologie und Mikrohärte von statistischen Ethylen/Propylen Copolymeren";
Vortrag: Polymerwerkstoffe 2002,
Halle (Saale);
25.09.2002
- 27.09.2002; in: "Polymerwekstoffe 2002",
(2002),
S. 354
- 357.
T. Koch, S. Seidler:
"Zusammenhang von Eindringhärte und Streck- und Druckfließspannung am Beispiel von PP/PE-Blends";
Vortrag: Werkstoffprüfung 2004,
Neu-Ulm (Deutschland);
25.11.2004
- 26.11.2004; in: "Tagungsband Werkstoffprüfung. Konstruktion, Qualitätssicherung und Schadensanalyse",
(2004),
S. 119
- 122.
T. Koch, S. Seidler, S. Bernstoff, E. Halwax:
"Microhardness of quenched Polypropylene";
Vortrag: Austrian Polymer Meeting,
Wien;
15.09.2003
- 17.09.2003; in: "6th Austrian Polymer Meeting",
(2003).
T. Koch, S. Seidler, S. Bernstorff, E. Halwax:
"Microhardness of quenched Polypropylene";
Vortrag: 6th Austrian Polymer Meeting,
Wien;
15.09.2003
- 17.09.2003; in: "6th Austrian Polymer Meeting, Wien (Austria)",
(2003),
S. 82.
T. Koch, S. Seidler, E. Halwax, S. Bernstorff:
"Microhardness of Quenched iPP";
Poster: 11. Internationale Fachtagung Polymerwerkstoffe 2004,
Halle/Saale;
29.09.2004
- 01.10.2004; in: "Polymeric Materials 2004. Abstracts",
G. H. Michler (Hrg.);
(2004),
ISBN: 3-928466-68-2;
S. PI-13.
T. Koch, S. Seidler, E. Halwax, S. Bernstorff:
"Microhardness of quenched iPP";
Poster: 10. Problemseminar Deformations- und Bruchverhalten von Kunststoffen,
Merseburg (Germany);
15.06.2005
- 17.06.2005; in: "10. Problemseminar Deformations- und Bruchverhalten von Kunststoffen",
(2005),
2 S.
T. Koch, A. Steiger-Thirsfeld, A Zankel, H Reingruber, D. Salaberger, S. Seidler:
"Morphology characterization of particle filled polymers by tomographic methods";
Poster: 14th International Conference Polymeric Materials,
Halle (Saale);
15.09.2010
- 17.09.2010; in: "Proceedings Polymeric Materials 2010",
(2010),
ISBN: 978-3-86829-282-4;
Paper-Nr. P P12,
4 S.
T. Koch, A. Steiger-Thirsfeld, A Zankel, H Reingruber, D. Salaberger, S. Seidler:
"Morphology characterization of particle filled polymers by tomographic methods";
Poster: 10th Austrian Polymer Meeting and 2nd Austrian-Slowenian Polymer Meeting,
Leoben;
08.09.2010
- 10.09.2010; in: "Book of Abstracts",
(2010),
S. 133.
T. Koch, A Zankel, H Reingruber, D. Salaberger, A. Steiger-Thirsfeld, N. Matsko, S. Seidler:
"Methods for characterizing the 3D morphology of polymer composites";
Vortrag: POLYCHAR 19 - World Forum on Advanced Materials,
Kathmandu, Nepal;
20.03.2011
- 24.03.2011; in: "Book of Abstracs",
Nepal Polymer Institute,
(2011),
ISBN: 9937-2-3292-9;
S. 115.
R. Königshofer, A. Liersch, W. Lengauer, T. Koch, M. Scheerer, W. Hohenauer:
"Solid-state properties of binary, ternary and quaternary transition metal carbonitrides";
Vortrag: PM 2004 - Powder Metallurgy World Congress and Exhibition,
Vienna (Austria);
17.10.2004
- 21.10.2004; in: "Euro PM 2004. Conference Proceedings, Vol. 3",
European Powder Metallurgy Association,
(2004),
ISBN: 1899072152;
S. 593
- 598.
B. Kohlhauser, H. Riedl, C.M. Koller, S. Koloszvári, V. Paneta, D. Primetzhofer, H. Hutter, P.H. Mayrhofer:
"Influence of transition metal dopants on the reactive sputtering process of Al2O3 thin films and their oxidation resistance";
Vortrag: 44th International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego;
18.04.2017
- 23.04.2017; in: "44th ICMCTF",
(2017),
S. 53.
B. Kohlhauser, M. Ripoll Rodríguez, H. Riedl, P.H. Mayrhofer:
"WC-based PVD coatings and their interaction with EP additives in lubricated contacts";
Poster: 21st International Conference on Wear of Materials,
Long Beach, CA;
26.03.2017
- 30.03.2017; in: "21st International Conference on Wear of Materials",
(2017),
S. 114.
D. Kojic, Y. Mete, P. Knaack, K. Ehrmann, J. Stampfl, R. Liska:
"Expanding Spirocyclic Monomers For Hot Lithography Technology";
Poster: The 6th (virtual) European Symposium of Photopolymer Science,
Wien;
15.06.2021
- 17.06.2021; in: "vESPS 2021",
(2021),
ISBN: 978-3-9504809-3-1;
S. 189.
C.M. Koller, V. Dalbauer, R. Raab, S. Kolozsvári, J. Ramm, M. Bartosik, P.H. Mayrhofer:
"On the phase evolution of Al-Cr intermetallics and oxides formed by cathodic arc evaporation";
Vortrag: 44th International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego (USA);
24.04.2017
- 28.04.2017; in: "Book of Abstracts",
(2017),
S. 54.
C.M. Koller, V. Dalbauer, B. Widrig, S. Kolozsvári, J. Ramm, P.H. Mayrhofer:
"On the phase evolution of Al-Cr intermetallics and (Al,Cr)2O3 formed by cathodic arc evaporation";
Vortrag: 62. Metallkunde Kolloquium,
Lech am Arlberg;
11.04.2016
- 13.04.2016; in: "Book of Abstracts",
(2016).
C.M. Koller, R Hahn, J. Ramm, S. Kolozsvári, P.H. Mayrhofer:
"Droplets in Cathodic Arc Evaporated (Al,Cr)2O3-based Coatings and the Nucleation of Dedicated Crystalline Structures";
Vortrag: AVS 62nd International Symposium & Exhibition,
San Jose, USA;
18.10.2015
- 23.10.2015; in: "Book of Abstracts",
(2015),
S. 103.
C.M. Koller, D. Holec, J. Ramm, S. Kolozsvári, J. Paulitsch, P.H. Mayrhofer:
"Alloying Trends of Refractory Metals on the Phase Stability of (Al1-x-yCrxMy)2O3 Coatings";
Vortrag: 72nd IUVSTA Workshop,
Seggau;
07.04.2014
- 11.04.2014; in: "Book of Abstracts",
(2014).
C.M. Koller, D. Holec, J. Ramm, S. Kolozsvári, J. Paulitsch, P.H. Mayrhofer:
"Challenges in Ab Initio Guided Design of Corundum Type (Al,Cr)2O3 Thin Films";
Vortrag: 2nd Austrian-Indian-Symposium on Materials Science and Tribology,
Wiener Neustadt;
26.05.2014
- 28.05.2014; in: "Book of Abstracts",
(2014).
C.M. Koller, D. Holec, J. Ramm, S. Kolozsvári, J. Paulitsch, P.H. Mayrhofer:
"Challenges in Ab Initio Guided Design of Corundum‐type (Al,Cr)2O3 Thin Films";
Vortrag: 41st International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego, CA;
28.04.2014
- 02.05.2014; in: "Book of Abstracts",
(2014).
C.M. Koller, D. Holec, J. Ramm, S. Kolozsvári, J. Paulitsch, P.H. Mayrhofer:
"Computational Materials Science of High Performance Industrially Utilised Oxide Coatings: (Al1-xCrx)2O3";
Poster: 3rd Vienna Scientific Cluster User Workshop,
Neusiedl am See;
24.02.2014
- 25.02.2014; in: "Book of Abstracts",
(2014).
C.M. Koller, D. Holec, J. Ramm, S. Kolozsvári, J. Paulitsch, P.H. Mayrhofer:
"Impact of Point Defects on Stability of (AlxCr1-x)2O3 Phases";
Poster: 41st International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego, CA;
28.04.2014
- 02.05.2014; in: "Book of Abstracts",
(2014).
C.M. Koller, R. Hollerweger, R. Rachbauer, P. Polcik, D. Holec, P.H. Mayrhofer:
"Increasing the thermo-mechanical properties of Ti-Al-N coatings by alloying Ta and modifying the coating architecture";
Vortrag: 7th International Conference on Surface Engineering,
Chengdu, China (eingeladen);
22.10.2016
- 25.10.2016; in: "Book of Abstracts",
(2016),
S. 13.
C.M. Koller, R. Hollerweger, R. Rachbauer, P. Polcik, J. Paulitsch, P.H. Mayrhofer:
"Increasing the thermo-mechanical properties of Ti-Al-N coatings by alloying Ta and modifying the coating architecture";
Vortrag: 16th Joint Vacuum Conference (JVC-16), the 14th European Vacuum Conference (EVC-14) and the 23th Croatian Slovenian International Scientific Meeting on Vacuum Science and Technique,
Portoroz;
06.06.2016
- 10.06.2016; in: "Book of Abstracts",
(2016),
S. 29.
C.M. Koller, R. Hollerweger, R. Rachbauer, P. Polcik, J. Paulitsch, P.H. Mayrhofer:
"Thermal stability and oxidation resistance of TiAlN/TaAlN multilayer coatings";
Poster: Plansee Seminar 2013,
Reutte;
03.06.2013
- 07.06.2013; in: "Proceedings of the 18th Plansee Seminar 2013",
(2013),
S. 2027
- 2040.
C.M. Koller, R. Hollerweger, R. Rachbauer, P. Polcik, J. Paulitsch, P.H. Mayrhofer:
"Thermal stability and oxidation resistance of TiAlN/TaAlN multilayer coatings";
Poster: International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2013,
San Diego;
29.04.2013
- 03.05.2013; in: "Book of Abstracts",
(2013),
S. 88.
C.M. Koller, A Kirnbauer, H. Bolvardi, P. Polcik, P.H. Mayrhofer:
"Increasing the thermo-mechanical properties of Ti-Al-N coatings by alloying Ta and modifying the coating architecture";
Vortrag: AVS 63rd Symposium & Exhibition,
Nashville, TN, USA;
06.11.2016
- 11.11.2016; in: "Book of Abstracts",
(2016),
S. 125.
C.M. Koller, A Kirnbauer, V. Dalbauer, R. Raab, S. Kolozsvári, J. Ramm, P.H. Mayrhofer:
"Challenges and Recent Progress in the Development of Arc Evaporated (Al1-xCrx)2O3";
Vortrag: 45h International Conference on Metallurgical Coatings and Thin FIlms,
San Diego (eingeladen);
22.04.2018
- 27.04.2018; in: "Book of Abstracts",
B4-2-3
(2018),
S. 85.
C.M. Koller, A Kirnbauer, B. Widrig, S. Kolozsvári, J. Ramm, P.H. Mayrhofer:
"On the phase evolution of Al-Cr intermetallics formed by cathodic arc evaporation";
Vortrag: 15th International Conference on Plasma Surface Engineering,
Garmisch-Partenkirchen;
12.09.2016
- 16.09.2016; in: "Book of Abstracts",
(2016),
S. 49.
C.M. Koller, R. Rachbauer, P. Polcik, F. Munnik, J. Paulitsch, P.H. Mayrhofer:
"Influence of B and Fe on the structure and morphology of arc evaporated (Al,Cr)2O3 thin films";
Vortrag: EMRS Spring Meeting 2013,
Straßbourg;
27.05.2013
- 31.05.2013; in: "Book of Abstracts",
(2013).
C.M. Koller, J. Ramm, S. Kolozsvári, M. Bartosik, J. Paulitsch, P.H. Mayrhofer:
"Impact of Fe on the Structural Evolution of Cathodic Arc Evaporated Al-Cr-O Coatings";
Vortrag: 14th International Conference on Plasma Surface Engineering,
Garmisch-Partenkirchen;
15.09.2014
- 19.09.2014; in: "Book of Abstracts",
(2014).
C.M. Koller, J. Ramm, S. Kolozsvári, J. Paulitsch, D. Holec, P.H. Mayrhofer:
"Initiierung von Phasenstrukturen in Al-Cr-basierten Oxiden durch Mikrostruktur- und Legierungskonzepte: Eine experimentelle und computergestützte Studie";
Vortrag: ASMET Forum für Metallurgie und Werkstofftechnik,
Montanuniversität Leoben;
10.05.2016
- 11.05.2016; in: "Book of Abstracts",
(2016),
S. 10.
C.M. Koller, J. Ramm, S. Kolozsvári, J. Paulitsch, P.H. Mayrhofer:
"Role of Droplets in the Phase Formation of Arc Evaporated (Al0.70Cr0.25Fe0.05)2O3 Coatings";
Vortrag: 42nd International Conference on Metallurgical Coatings and Thin Films,
San Diego;
20.04.2015
- 24.04.2015; in: "Book of Abstracts",
(2015),
S. 25.
C.M. Koller, J. Ramm, S. Kolozsvári, J. Paulitsch, P.H. Mayrhofer:
"Structure and Morphology of Cathodic Arc Evaporated (Cr,Al)2O3-based Multilayer Coatings";
Poster: 42nd International Conference on Metallurgical Coatings and Thin Films,
San Diego, CA;
20.04.2015
- 24.04.2015; in: "Book of Abstracts",
(2015),
S. 92.
C.M. Koller, H. Riedl, M. Bartosik, J. Ramm, S. Kolozsvári, P.H. Mayrhofer:
"The Influence of Fe-doping on Mechanical Properties and Thermal Stability of Arc Evaporated Al-Cr-O Coatings";
Vortrag: 43rd International Conference on Metallurgical Coatnigs and Thin Films,
San diego;
25.04.2016
- 29.04.2016; in: "Book of Abstracts",
(2016),
S. 49.
J. Kollmer, P. Dorfinger, G. Mitteramskogler, J. Stampfl:
"Nichtmetallische Hochleistungswerkstoffe für die lithographiebasierte additive Fertigung";
Vortrag: 14th Rapid.Tech Conference,
Erfurt;
20.06.2017
- 22.06.2017; in: "Rapid.Tech - International Trade Show & Conference for Additive Manufacturing",
(2017),
ISBN: 978-3-446-45459-0;
Paper-Nr. 245,
10 S.
I. Kotter, W. Grellmann, T. Koch, S. Seidler:
"Einfluss der Mikrodeformationsprozesse vor der Rissspitze auf das Zähigkeitsverhalten von Polypropylenwerkstoffen";
Poster: 9. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Martin-Luther-Univ. Halle-Wittenberg, Merseburg D-;
25.06.2003
- 27.06.2003; in: "9. Problemseminar Deformations- und Bruchverhalten von Kunststoffen, Merseburg (Germany)",
Merseburg (Germany)
(2003),
ISBN: 3-86010-710-0;
S. 376
- 377.
I. Kotter, W. Grellmann, T. Koch, S. Seidler:
"Zähigkeitscharakterisierung von EPR-modifizierten Polypropylenwerkstoffen";
Poster: 10. Problemseminar Deformations- und Bruchverhalten von Kunststoffen,
Merseburg (Germany);
15.06.2005
- 17.06.2005; in: "10. Problemseminar Deformations- und Bruchverhalten von Kunststoffen",
(2005),
6 S.
I. Kotter, W. Grellmann, S. Seidler, J. Fiebig, M. Gahleitner:
"Morphologie-Zähigkeits-Korrelationen von EPR-modifizierten Polypropylenwerkstoffen";
Vortrag: 9. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Merseburg Germany;
25.06.2003
- 27.06.2003; in: "9. Problemseminar Deformations- und Bruchverhalten von Kunststoffen, Merseburg (Germany)",
R. Martin (Hrg.);
Martin-Luther-Univ. Halle-Wittenberg Merseburg, D-
(2003),
ISBN: 3-86010-710-0;
S. 229
- 240.
E. Kozeschnik, B. Adjassoho, C. Lechner, Ch. Habersohn, F. Bleicher, S. Gössinger, C. Bauer:
"Controlled Surface Treatment With Machine Hammer Peening";
Vortrag: 22nd International Conference on Metallurgy and Materials,
Brno, Tschechien;
15.05.2012
- 17.05.2012; in: "METAL 2013",
(2012),
Paper-Nr. B28,
6 S.
T. Kratochvilla, T. Koch, H. Muschik, H Dragaun:
"Slow crack growth behaviour of PE-pipes. A sequential microscopic study.";
Poster: 11. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Merseburg;
20.06.2007
- 22.06.2007; in: "11. Problemseminar "Deformation und Bruchverhalten von Kunststoffen"",
(2007),
5 S.
T. Kratochvilla, T. Koch, C Zobl, H Dragaun:
"Short time test methods to predict long time slow crack behaviour?";
Poster: 12. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Merseburg;
24.06.2009
- 26.06.2009; in: "Tagungsband 12. Problemseminar",
(2009),
6 S.
J. Kreyca, A. Falahati, E. Kozeschnik:
"Experimental characterisation and modelling of deformation-induced microstructure in an A6061 aluminium alloy";
Vortrag: International Conference on Materials, Processing and Product Engineering 2015,
Leoben;
03.11.2015
- 05.11.2015; in: "Proceedings MPPE 2015",
IOP Conference Series: Materials Science and Engineering,
119
(2016),
S. 1
- 5.
J. Kreyca, A. Falahati, E. Kozeschnik:
"Microstructure and flow stress modelling during plastic deformation of an aluminum alloy type A6061";
Vortrag: Conference MEFORM 2015, Light Metals - Forming Technologies and Further Processing,
Freiberg;
25.03.2015
- 27.03.2015; in: "Conference MEFORM 2015, Light Metals - Forming Technologies and Further Processing",
Materials Today: Proceedings,
Volume 2, Supplement 1
(2015),
ISSN: 2214-7853;
S. 107
- 112.
J. Kreyca, A. Falahati, E. Kozeschnik:
"Modelling microstructure evolution in polycrystalline aluminium - Comparison of one and multi-parameter models with experiment";
Vortrag: 18th International ESAFORM Conference on Material Forming,
Graz;
15.04.2015
- 17.04.2015; in: "Materials Forming ESAFORM 2015",
scientific.net,
Key Engineering Materials (Volumes 651-653)
(2015),
ISSN: 1662-9795;
S. 587
- 591.
J. Kreyca, A. Falahati, E. Kozeschnik:
"Modelling Yield Strength in an A6061 Aluminium Alloy";
Vortrag: THERMEC´2016,
Graz;
29.05.2016
- 03.06.2016; in: "THERMEC 2016",
Trans Tech Publications Inc.,
Materials Science Forum, Volume 879
(2017),
ISBN: 978-3-0357-1129-5;
S. 1014
- 1018.
J. Kreyca, E. Kozeschnik:
"Vorhersage von Fließkurven für Aluminium-Legierungen - Erwartung und Wirklichkeit";
Hauptvortrag: Simufact 16. Roundtable,
Marburg;
19.05.2015
- 21.05.2015; in: "Simufact 16. Roundtable",
(2015),
S. 1
- 5.
S. Krisam, G Habler, T. Wojcik, E. Povoden-Karadeniz:
"Optimierte Probenpräparation von Hyper-Duplex Edelstahl für die EBSD-Analyse";
Vortrag: 53. Metallographietagung im Rahmen der WerkstoffWoche,
Dresden;
18.09.2019
- 20.09.2019; in: "Sonderbände der praktischen Metallographie zur 53. Metallographischen Tagung",
G. Petzow (Hrg.);
Inventum GmbH,
53757 Sankt Augustin, Deutschland
(2019),
ISBN: 978-3-88355-417-4;
S. 47
- 53.
B. Kriszt:
"Innovation zellulare Metalle - Potenziale und Perspektiven";
Vortrag: Forum für Metallurgie und Werkstofftechnik,
Leoben;
18.05.2004
- 19.05.2004; in: "Tagungsunterlagen Forum für Metallurgie und Werkstofftechnik",
(2004),
S. 42
- 43.
B. Kriszt, K. Faure, A. Kottar, R. Jancek:
"Zellulare Metalle - von der Herstellung bis zur Anwendung";
Vortrag: 2. Ranshofener Leichtmetalltage 2002,
Geinberg;
24.04.2002
- 26.04.2002; in: "2. Ranshofener Leitmetalltage 2002 - Vom Werkstoff zum Bauteilsystem",
H. Kaufmann, A. Wahlen, P. Uggowither (Hrg.);
LKR-Verlag,
Ranshofen
(2002),
S. 161
- 171.
S. Krivec, R. Liska, H. Lichtenegger:
"Sol-Gel Materials as Carrier for Polymeric Waveguides";
Poster: 9th Austrian Polymer Meeting,
Graz, A;
26.03.2008
- 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts",
(2008),
S. 83.
A. Krumphals, M. Stockinger, F. Warchomicka, C. Sommitsch:
"Evolution of beta grain size during beta phase processing of Ti-6Al-4V";
Vortrag: Ti-2011 The 12th World Conference on Titanium,
Beijing - China;
19.06.2011
- 24.06.2011; in: "Ti-2011",
(2011).
M. Kumar, C. Poletti, H.P. Degischer:
"Formability of heat treated Al-Mg-Si alloys";
Vortrag: 11th International Aluminium Conference - INALCO 2010,
Amsterdam, The Netherlands;
23.06.2010
- 25.06.2010; in: "11th International Aluminium Conference-'INALCO'2010 "New Frontiers in Light Metals"",
(2010),
ISBN: 978-1-60750-585-3;
S. 251
- 258.
M. Kumar, C. Poletti, H.P. Degischer:
"Precipitation Kinetics in Age Hardening Al-alloys by Dilatometry and Differential Scanning Calorimetry";
Vortrag: ICAA 12,
Yokohama; Japan;
05.09.2010
- 09.09.2010; in: "Proceedings of the 12th International Conference on Aluminium Alloys",
(2010),
ISBN: 978-4-905829-11-9;
S. 1009
- 1014.
M. Kumar, C. Poletti, H.P. Degischer:
"Warm Deformation Behaviour of the AA7020 Alloy";
Vortrag: International Conference on Aluminium Alloys (ICAA11),
Aachen, Germany;
22.09.2008
- 28.09.2008; in: "Aluminium Alloys",
Wiley-VCH,
Volume 2
(2008),
ISBN: 978-3-527-32367-8;
S. 1771
- 1776.
M. Kumar, L.C. Whitmore, C. Poletti, H.P. Degischer:
"TEM of Strengthening Precipitates in AW7020 Alloy";
Vortrag: 13. Internationale Metallographie-Tagung 2010,
Leoben;
29.09.2010
- 01.10.2010; in: "Fortschritte der Metallographie",
Sonderbände der Praktischen Metallographie,
42
(2010),
ISBN: 978-3-88355-382-5;
S. 253
- 258.
S. Kumar, S. Krisam, A. Keplinger, E. Povoden-Karadeniz:
"Analysis of sigma formation mechanisms in aged hyper duplex stainless steel";
Vortrag: MS&T 19,
Portland, Oregon, USA;
29.09.2019
- 03.10.2019; in: "Contributed papers from Materials Science and Technology 2019 (MS&T19)",
(2019),
7 S.
J. Kumpfmüller, R. Inführ, K. Stadlmann, K. Cicha, V. Satzinger, V. Schmidt:
"C4-355 Flexible Optical WaveGuides via Two-Photon Polymerization";
Poster: Materials science and engineering MSE 2010,
Darmstadt;
24.08.2010
- 26.08.2010; in: "Tagungsband Material science and engineering 2010",
(2010),
S. 40.
J. Kumpfmüller, N.U Pucher, K. Stadlmann, J. Stampfl, R. Liska:
"Photo-induced Waveguide formation in Polysiloxanes";
Vortrag: RadTech Europe 2009,
Nizza, FR;
14.10.2009
- 15.10.2009; in: "Radtech Europe 2009, Proceedings",
(2009),
7 S.
J. Kumpfmüller, K. Stadlmann, R. Inführ, N.U Pucher, J. Stampfl, R. Liska:
"Two-Photon-Induced Waveguide Formation In Polysiloxanes";
Poster: 13. Österreichische Chemietage,
Wien;
24.08.2009
- 27.08.2009; in: "13. Österreichische Chemietage",
(2009),
ISBN: 978-3-900554-66-8;
S. 14.
J. Kumpfmüller, K. Stadlmann, Z. Li, G. Schmid, J. Stampfl, R. Liska:
"Two-photon-induced microfabrication of flexible optical waveguides";
Vortrag: The 12th International Symposium on Laser Precision Microfabrication,
Takamatsu, J;
07.06.2011
- 10.06.2011; in: "Program and Technical Digest (LPM2011)",
(2011),
S. 104.
J. Kumpfmüller, K. Stadlmann, V. Satzinger, J. Stampfl, R. Liska:
"Fabrication of flexible optical waveguides via two-photon induced thiol-ene polymerization";
Poster: RadTech Europe 2011,
Basel, CH;
18.10.2011
- 20.10.2011; in: "RadTech Europe 2011 - Abstract Book",
(2011),
S. 124.
M. Kury, C. Gorsche, K. Seidler, P. Gauss, T. Koch, R. Liska:
"Addition-fragmentation chain transfer reagents in photopolymerisation of methacrylic monomers";
Vortrag: 6th Bratislava Young Polymer Scientists Workshop,
High Tatras, Slovakia;
14.03.2016
- 18.03.2016; in: "BYPoS Workshop book",
book of abstracts,
(2016),
ISBN: 978-80-970923-8-2;
S. 95.
M. Kury, T. Koch, C. Gorsche, R. Liska:
"Investigation of diacrylate-based cyclopolymerizable monomers in photopolymerization";
Poster: 5th European Symposium of Photopolymer Science,
Mulhouse, France;
03.09.2018
- 06.09.2018; in: "5th ESPS 2018",
5th European Symposium of Photopolymer Science,
(2018),
S. P19.
M. Kury, G. Peer, K. Seidler, C. Gorsche, P. Gauss, T. Koch, P. Dorfinger, J. Stampfl, R. Liska:
"Toughening photoploymers by means of addition-fragmentation chain transfer reagents for 3D printing";
Poster: European Polymer Congress 2019 (EPF 2019),
Crete, Greece;
09.06.2019
- 14.06.2019; in: "European Polymer Congress 2019 (EPF 2019)",
(2019),
S. 762.
M. Kury, K. Seidler, P. Dorfinger, T. Koch, J. Stampfl, C. Gorsche, R. Liska:
"Toughening of photopolymer Networks using Addition-fragmentation chain transfer Reagents";
Vortrag: RadTech Europe Conference & Exhibition 2017,
Prag;
17.10.2017
- 19.10.2017; in: "Rad Tech Europe Conference & Exhibition 2017",
(2017),
S. 13.
M. Kury, K. Seidler, P. Gauss, P. Dorfinger, T. Koch, J. Stampfl, C. Gorsche, R. Liska:
"Modification of (Meth)Acrylate-Based Photopolymer Networks Using Addition-Fragmentation Chain Transfer Reagents";
Vortrag: Danube Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017",
Book of Abstracts.com,
(2017),
ISBN: 978-3-9504017-6-9;
S. OP-90.
M. Kury, K. Seidler, A. Svirkova, M. Marchetti-Deschmann, T. Koch, C. Gorsche, R. Liska:
"Addition-Fragmentation Chain Transfer Reagents in Photopolymerization of Acrylates";
Poster: 4th European Symposium of Photopolymer Science,
Leipzig;
11.09.2016
- 14.09.2016; in: "ESPS 2016",
(2016),
S. P-57.
R. Lach, W. Grellmann, G. M. Kim, G. H. Michler:
"Indentation Methods for Characterising the Mechanical and Fracture Behaviour of Polymer Nanocomposites";
Vortrag: Chemical Congress 2008: Chemistry for Sustainable Development,
Kathmandu (eingeladen);
23.05.2008
- 25.05.2008; in: "Chemical Congress 2008: Chemistry for Sustainable Deveiopment",
Nepal Chemical Society,
Kathmandu
(2008),
ISBN: 978-9937-2-0535-1;
S. 76.
R. Lach, P Hutar, P Vesely, E. Nezbedova, Z Knesl, T. Koch, C. Bierögel, W. Grellmann:
"Assessment of the local mechanical behaviour of joints in polymer parts";
Poster: 14th International Conference Polymeric Materials,
Halle (Saale);
15.09.2010
- 17.09.2010; in: "Proceedings Polymeric Materials 2010",
(2010),
ISBN: 978-3-86829-282-4;
Paper-Nr. P T63.
R. Lach, P Hutar, P Vesely, E. Nezbedova, Z Knesl, T. Koch, C. Bierögel, W. Grellmann:
"Assessment of the local mechanical behaviour of joints in polymer parts by indentation techniques";
Poster: 13. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Halle-Merseburg;
29.06.2011
- 01.07.2011; in: "13. Problemseminar Deformation und Bruchverhalten von Kunststoffen",
(2011),
5 S.
R. Lach, T. Koch, B. Feichtenschlager, G. Kickelbick, W. Grellmann, S. Seidler:
"Application of improved indentation fracture mechanics approaches on in-situ polymerisized organic-inorganic nanocomposites";
Vortrag: 12th International Conference on Fracture,
Ottawa;
12.07.2009
- 17.07.2009; in: "12th International Conference on Fracture - Proceedings",
(2009),
Paper-Nr. T29.009,
8 S.
R. Lach, T. Koch, S. Seidler:
"Influence of the Geometry on the Essential Work of Fracture of Polypropylene Materials";
Vortrag: 17th European Conference on Fracture: Multilevel Approach to Fracture of Materials, Components and Structures,
Brno;
02.09.2008
- 05.09.2008; in: "17th European Conference on Fracture: Multilevel Approach to Fracture of Materials, Components and Structures",
European Structural Integrity Society,
Brno
(2008),
ISBN: 978-80-214-3692-3;
Paper-Nr. PE170313,
7 S.
R. Lach, S. Seidler, W. Grellmann:
"Crack propagation kinetics of polymers at quasistatic and moderate impact loading";
Vortrag: 11th International Conference on Fracture (ICF 11),
Turin (Italy);
20.03.2005
- 25.03.2005; in: "11th International Conference on Fracture",
(2005),
Paper-Nr. Polymers 5360,
6 S.
R. Lach, S. Seidler, W. Grellmann:
"Crack Propagation Kinetics of Polymers under Moderate Impact Loading";
Poster: 11. Internationale Fachtagung Polymerwerkstoffe 2004,
Halle/Saale;
29.09.2004
- 01.10.2004; in: "Polymeric Materials 2004. Abstracts",
G. H. Michler (Hrg.);
(2004),
ISBN: 3-928466-68-2;
S. PI-69.
R. Lach, S. Seidler, W. Grellmann:
"Crack Propagation Kinetics of Polymers under Moderate Impact Loading";
Poster: 10. Problemseminar Deformations- und Bruchverhalten von Kunststoffen,
Merseburg (Germany);
15.06.2005
- 17.06.2005; in: "10. Problemseminar Deformations- und Bruchverhalten von Kunststoffen",
W. Grellmann (Hrg.);
(2005),
1 S.
R. Lach, S. Seidler, W. Grellmann:
"Resistance against the Intrinsic Rate of Fracture Mechanics Parameters for Polymeric Materials under Moderate Impact Loading";
Poster: 12th International Conference on Deformation Yield and Fracture of Polymers, Cambridge (UK),
Churchill College Cambridge, UK;
07.04.2003
- 10.04.2003; in: "12th International Conference on Deformation Yield and Fracture of Polymers",
IOM communications,
(2003),
ISBN: 1-86125-158-0;
S. 313
- 316.
R. Lach, S. Seidler, W. Grellmann:
"Resistance against the Intrinsic Rate of Fracture Mechanics Parameters for Polymeric Materials under Moderate Impact Loading";
Poster: 9. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Martin-Luther-Univ. Halle-Wittenberg Merseburg, D-;
25.06.2003
- 27.06.2003; in: "9. Problemseminar Deformations- und Bruchverhalten von Kunststoffen",
CD-ROM,
(2003),
ISBN: 3-86010-710-0;
S. 386
- 389.
R. Lach, S. Seidler, W. Grellmann:
"Time-changeable Fracture Mechanics Parameters for Polymers under Impact Loading";
Vortrag: 14th Bienniel Conference on Fracture - ECF 14,
Cracow, Poland;
08.09.2002
- 13.09.2002; in: "ECF 14 Fracture Mechanics Beyond 2000",
A. Neimitz, I. Rokach, D. Kocanda, K. Golos (Hrg.);
Vol. II/III
(2002),
S. 285
- 292.
R. Lach, S. Seidler, W. Grellmann:
"Zeitabhängiges Bruchverhalten von Polymerwerkstoffen unter schlagartiger Beanspruchung";
Vortrag: 9. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Martin-Luther Univ. Halle Wittenberg Merseburg D-;
25.06.2003
- 27.06.2003; in: "9. Problemseminar Deformation und Bruchverhalten von Kunststoffen, Merseburg (Germany)",
S. Seidler (Hrg.);
9. Problemseminar Deformations- und Bruchverhalten von Kunststoffen,
Martin-Luther-Univ. Halle Wittenberg Merseburg, D-
(2003),
ISBN: 3-86010-710-0;
S. 162
- 169.
P. Lang, A. Falahati, E. Povoden-Karadeniz, M. Ahmadi, P. Warczok, E. Kozeschnik:
"Modeling of the Yield Strength Evolution in Al-Mg-Si Alloys";
Vortrag: ICAA 12,
Yokohama; Japan;
05.09.2010
- 09.09.2010; in: "Proceedings - The 12th Internatinal Conference on Aluminium Alloys",
(2010),
ISBN: 978-4-905829-11-9;
S. 1443
- 1448.
P. Lang, A. Falahati, E. Povoden-Karadeniz, O. Nodin, P. Warczok, E. Kozeschnik:
"Simulation of precipitation sequences of metastable and stable phases in Al-Mg-Si alloys";
Poster: JSC 2010,
Wien;
07.04.2010
- 09.04.2010; in: "Junior Scientist Conference",
(2010),
ISBN: 978-3-200-01797-9;
S. 111
- 112.
P. Lang, P. Mohn, A. Falahati, E. Kozeschnik:
"Ab initio simulations of vacancy-solute clusters in Al-Mg-Si and Al-Zn-mg alloys";
Vortrag: ICAA13,
Pittsburgh, Pennsylvania, USA;
03.06.2012
- 07.06.2012; in: "13th International Conference on Aluminium Alloys",
Wiley,
Conference Proceedings, Pittsburgh/Pennsylvania/USA
(2012),
ISBN: 978-1-118-45804-4;
S. 273
- 277.
P. Lang, E. Povoden-Karadeniz, W. Mayer, A. Falahati, E. Kozeschnik:
"The bustling nature of vacancies in Al alloys";
Poster: PRICM-8: Pacific Rim International Congress on Advanced Materials and Processing 2013,
Waikoloa, USA;
04.08.2013
- 09.08.2013; in: "The 8th Pacific Rim International Congress on Advanced Materials and Processing",
Wiley,
(2013),
ISBN: 978-0-470-94309-0;
S. 3181
- 3188.
F. Lasagni, H.P. Degischer:
"FIB EDX Tomography - 3D Characterization of Al-Si eutectics";
Poster: Junior Scientist Conference 2006,
TU Wien;
19.04.2006
- 21.04.2006; in: "Junior Scientist Conference 2006, Proceedings",
(2006),
ISBN: 3-902463-05-8;
S. 149
- 150.
F. Lasagni, A. Lasagni, C. Holzapfel, H.P. Degischer, F. Mücklich:
"3D Study of the eutectic microstructure in AlSi12 and AlSi8.4Mg4.9 aooloys by FIB Tomography";
Vortrag: 41. Metallographie- Tagung 2007,
Bremen;
19.09.2007
- 21.09.2007; in: "Fortschritte in der Metallographie. Sonderbände der Praktischen Metallographie 39",
39
(2007),
ISBN: 978-3-88355-362-7;
S. 67
- 71.
F. Lasagni, A. Lasagni, C. Holzapfel, F. Mücklich, H.P. Degischer:
"Análisis 3D del Si eutéctico en Aleaciones Aluminio-Silicio y Materiales Compuestos";
Vortrag: IX Congreso Nacional de Materiales,
Vigo, Spain;
20.06.2006
- 22.06.2006; in: "Perspectiva de la investigación sobre materiales en España en el siglo XXI . IX Congreso Nacional de Materiales",
Servizo de Publicacións da Universidade de Vigo,
(2006),
ISBN: 84-8158-325-1;
S. 555
- 558.
F. Lasagni, A. Lasagni, C. Holzapfel, F. Mücklich, H.P. Degischer:
"Three Dimensional Study of Si-eutectic Structures in unreinforced and Short Fibre Reinforced Al-Alloys";
Vortrag: 12. Internationale Metallographie-Tagung,
Leoben, Österreich;
27.09.2006
- 29.09.2006; in: "Fortschritte in der Metallographie. Sonderbände der Praktischen Metallographie",
A. Kneissl (Hrg.);
Werkstoff-Informationsgesellschaft mbH,
Sonderbände der Praktischen Metallographie Band 38
(2006),
ISBN: 3-88355-354-9;
S. 177
- 183.
F. Lasagni, H. Mohammadian, A. Falahati, H.P. Degischer:
"Volume change of Si-containing Al-alloys during ageing";
Vortrag: 15th IFHTSE and SMT 20,
Wien;
25.09.2006
- 29.09.2006; in: "15th IFHTSE and SMT 20",
(2006),
Paper-Nr. HT6,
6 S.
F. Lasagni, G. Requena, H.P. Degischer, B. Mingler, M. Papakyriacou:
"Precipitation and Spheroidization of Si in AlSi Alloys and AlSi7/Al2O3/20s";
Vortrag: Euromat 2005,
Prague, Czech Republic;
05.09.2005
- 08.09.2005; in: "http://www.dgm.de/past/2005/euromat2005/programme/index.htm",
(2005),
1 S.
F. Lasagni, G. Requena, H.P. Degischer, M. Papakyriacou:
"Influence of Al2O3 short fibres and Si on the hardness of heat treated cast Al alloys";
Vortrag: 15. DGM-Symposium Verbundwerkstoffe und Werkstoffverbunde,
Kassel;
06.04.2005
- 08.04.2005; in: "Verbundwerkstoffe und Werkstoffverbunde",
M. Schlimmer (Hrg.);
(2005),
ISBN: 3-88355-340-9;
S. 57
- 62.
F. Lasagni, G. Requena, J. Garcia, J. Vivas, H.P. Degischer:
"In Situ measurement of local deformation in discontinuously reinforced aluminium matrix composites";
Vortrag: JORNADAS SAM-CONAMET-SIMPOSIO MATERIA 2003,
Bariloche;
17.11.2003
- 21.11.2003; in: "Jornadas SAM - Congreso Conamet - Simposio Materia 2003",
(2003),
ISBN: 987-20975-0-x;
S. 983
- 986.
F. Lasagni, G. Requena, E. Soppa:
"Local Deformation in Multiphase Materials during Tensile Tests";
Vortrag: AES - ATEMA´ 2007, International Conference on Advances and Trends in Engineering Materials and their Applications,
Montreal, Canada;
06.08.2007
- 10.08.2007; in: "Proceedings, AES - ATEMA 2007",
(2007),
S. 387
- 395.
H. Lasfargues, T. Glechner, C.M. Koller, V. Paneta, D. Primetzhofer, S. Kolozsvári, D. Holec, H. Riedl, P.H. Mayrhofer:
"Thermal stability and mechanical properties of Ta1-xHfxCy coatings for ultra-high temperature applications";
Vortrag: 15th International Conference on Plasma Surface Engineering,
Garmisch-Partenkirchen;
12.09.2016
- 16.09.2016; in: "Book of Abstracts",
OR0905
(2016),
S. 69.
A. Laska, A. Kolb, V. Archodoulaki:
"Studies of the in-vivo use on the physical and mechanical properties of conventional and crosslinked UHMWPE";
Vortrag: 5. Wiener Biomaterialsymposium,
Wien;
19.11.2012
- 21.11.2012; in: "5th Vienna Biomaterialsymposium Abstracts",
(2012),
S. 47.
D. Leitlmeier, H.P. Degischer, N. Babscan, H. Frankl:
"Development of a Melt Foaming Process with Particulate Reinforced Aluminum Alloys";
Vortrag: International Symposium on Enabling Technologies for Light Metals and Composite Materials and Their End-Products,
Québec, Canada;
11.08.2002
- 14.08.2002; in: "Light Metals 2002",
(2002),
S. 575
- 588.
D. Leitlmeier, H.P. Degischer, H. Flankl:
"Metallurgische Voraussetzungen für die Herstellung von Aluminium-Schaumformteilen aus der Schmelze";
Vortrag: 2. Ranshofener Leichtmetalltage 2002,
Geinberg;
24.04.2002
- 26.04.2002; in: "2. Ranshofener Leitmetalltage 2002 - Vom Werkstoff zum Bauteilsystem",
H. Kaufmann, A. Wahlen, P. Uggowither (Hrg.);
LKR-Verlag,
Ranshofen
(2002),
S. 185
- 199.
Z. Li, K. Cicha, A. Ajami, A. Rosspeintner, S. Naumov, T. Scherzer, J. Stampfl, R. Liska:
"A facial preparation and structure property relationship of novel photoinitiators for two -photon photopolymerization";
Vortrag: 4th Bratislava Young Polymer Scientists workshop,
Bratislava;
01.10.2012
- 05.10.2012; in: "4th Bratislava Young Polymer Scientists workshop",
(2012),
ISBN: 978-80-970923-2-0;
S. 83.
Z. Li, K. Cicha, A. Ajami, A. Rosspeintner, S. Naumov, T. Scherzer, J. Stampfl, R. Liska:
"A Straightforward Synthesis and Structure-Property Relationship of Highly Efficient Two-photon Photoinitiators for 3D microfabrication";
Poster: European Symposium of Photopolymer Science - ESPS 2012,
Torino;
04.09.2012
- 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts",
(2012),
S. 24.
Z. Li, A. Ovsianikov, J. Torgersen, J. Stampfl, R. Liska:
"3D site-specific functionalization of matrices via multi-photon grafting and subsequent click reaction";
Poster: International Symposium on NanoPhotonics 2012,
Beijing;
12.02.2012
- 14.02.2012; in: "International Symposium on NanoPhotonics 2012",
(2012).
Z. Li, X.H. Qin, A. Ovsianikov, J. Torgersen, A. Ajami, W. Husinsky, S. Mühleder, W. Holnthoner, J. Stampfl, R. Liska:
"Novel water soluble two-photon initiators for 3D scaffold microfabrication";
Vortrag: 5th Biomaterialsymposium,
Vienna;
19.11.2012
- 21.11.2012; in: "5th Vienna Biomaterialsymposium 19.11.-21.11.2012",
J. Stampfl (Hrg.);
(2012),
S. 95.
Z. Li, X.H. Qin, A. Ovsianikov, J. Torgersen, A. Ajami, W. Husinsky, S. Mühleder, W. Holnthoner, J. Stampfl, R. Liska:
"Water Soluble Initiators for Two-photon Polymerization";
Poster: The 3rd TERMIS World Congress 2012,
Vienna;
05.09.2012
- 08.09.2012; in: "Journal of Tissue Engineering and Regenerative Medicine 2012",
John Wiley & Sons, Ltd.,
6/Supplement s1
(2012),
ISSN: 1932-7005;
S. 369.
Z. Li, X.H. Qin, A. Ovsianikov, J. Torgersen, A. Ajami, J. Stampfl, R. Liska:
"3D site-specific functionalization of matrices via multi-photon grafting and subsequent click reaction";
Poster: European Symposium of Photopolymer Science - ESPS 2012,
Torino;
04.09.2012
- 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts",
(2012),
S. 25.
Z. Li, X.H. Qin, A. Ovsianikov, J. Torgersen, S. Mühleder, W. Holnthoner, A. Ajami, W. Husinsky, J. Stampfl, R. Liska:
"Water Soluble Initiators for Two-photon Polymerization";
Poster: European Symposium of Photopolymer Science - ESPS 2012,
Torino;
04.09.2012
- 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts",
(2012),
S. 26.
Z. Li, M. Siklos, K. Cicha, A. Ajami, W. Husinsky, J. Stampfl, R. Liska:
"C4-303 Synthesis and Structure-Activity Relationship of Several Novel Two-Photon Initiators based on a D-pi-A-pi-D Chromophor";
Poster: Materials science and engineering MSE 2010,
Darmstadt;
24.08.2010
- 26.08.2010; in: "Tagungsband Material science and engineering 2010",
(2010),
S. 40.
Z. Li, M. Siklos, N.U Pucher, K. Cicha, A. Ajami, W. Husinsky, A. Rosspeintner, E. Vauthey, G. Gescheidt, J. Stampfl, R. Liska:
"Several novel aromatic ketone-based initiators for two-photon polymerization";
Poster: RadTech Europe 2011,
Basel, CH;
18.10.2011
- 20.10.2011; in: "RadTech Europe 2011 - Abstract Book",
(2011),
S. 126.
H. Lichtenegger:
"Biomineralization and self-assembled nanostructures - structure determination and material properties";
Vortrag: 23rd European Crystallography Meeting,
Leuven/ Belgien (eingeladen);
06.08.2006
- 11.08.2006; in: "Acta Crystallographica A",
Volume A62, Supplement
(2006),
S. s39.
H. Lichtenegger:
"Heavy metal containing worm teeth and self-assembled materials from the lab - nanostructure determination with synchrotron radiation techniques";
Vortrag: 13th International Conference on Biological Inorganic Chemistry (ICBIC13),
Wien (eingeladen);
15.07.2007
- 20.07.2007; in: "Journal of Biological Inorganic Chemistry",
Springer,
Vol. 12, Supplement 1
(2007),
S. 207.
H. Lichtenegger:
"Microbeam Fluorescence, Diffraction, and SAXS Imaging of Worm Jaws";
Vortrag: NSLS User Meeting,
Brookhaven National Laboratory, NY, U.S.A. (eingeladen);
23.05.2005
- 25.05.2005; in: "NSLS User Meeting",
http://www.nsls.bnl.gov/users/meeting/2005/workshops/workshop2.htm
(2005),
1 S.
H. Lichtenegger:
"SYNCHROTRON MICRO-SAXS AND MICRO-DIFFRACTION SCANNING TECHNIQUES FOR THE STUDY OF COMPLEX (BIO-)MATERIALS";
Vortrag: E-MRS 2005 Spring Meeting,
Strasbourg, France;
31.05.2005
- 03.06.2005; in: "E-MRS 2005 Spring Meeting",
(2005),
Paper-Nr. O-V.02,
1 S.
H. Lichtenegger, C. Fritscher, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"3D-Templating of hierarchical ceramics";
Vortrag: MRS Spring Meeting 2004,
San Francisco, USA;
12.04.2004
- 16.04.2004; in: "MRS Spring Meeting 2004, Abstracts",
MRS,
(2004),
S. 368.
S. Ligon, S. Baudis, F. Nehl, A. Mautner, B. Husar, M. Schwentenwein, A. Wilke, J. Stampfl, G. Russmüller, R. Liska:
"Biocompatible monomers for photo-based additive manufacturing technologies";
Poster: Materials Science and Engineering 2012,
Darmstadt;
25.09.2012
- 27.09.2012; in: "MSE Programme",
(2012),
S. 62.
S. Ligon, C. Dworak, S. Baudis, F. Nehl, H. Wilhelm, H. Bergmeister, D. Bernhard, J. Stampfl, R. Liska:
"Tailor-made Biomaterials for Vascular Tissue Regeneration printed by Additive Manufacturing Technologies";
Poster: Frontiers in Biomedical Polymers 2011,
Funchal, P;
09.05.2011
- 12.05.2011; in: "Ninth International Symposium on Frontiers in Biomedical Polymers",
(2011),
S. 87
- 88.
S. Ligon, C. Dworak, T. Koch, F. Varga, R. Liska:
"Photopolymerizable biocompatible polymers based on phosphorous containing vinyl esters and vinyl carbamates";
Poster: Frontiers in Biomedical Polymers 2011,
Funchal, P;
09.05.2011
- 12.05.2011; in: "Ninth International Symposium on Frontiers in Biomedical Polymers",
(2011),
S. 63.
S. Ligon, C. Heller, M. Schwentenwein, J. Stampfl, F. Varga, G. Russmüller, R. Liska:
"Rapid Prototyping of Bioabsorbalbe Polyvinylesters for Tissue Engineering";
Poster: ESAO - ASAIO Winter School 2011,
Semmering;
26.01.2011
- 29.01.2011; in: "ESAO-ASAIO Winter School",
(2011),
S. 51.
S. Ligon, B. Husar, A. Mautner, C. Heller, M. Schwentenwein, A. Wilke, G. Russmüller, J. Stampfl, R. Liska:
"Biocompatible monomers for photo-based additive manufacturing technologies";
Poster: MSE 2012 Darmstadt,
Darmstadt, Germany;
25.09.2012
- 27.09.2012; in: "MSE 2012 Darmstadt",
(2012),
S. 380.
S. Ligon, B. Husar, H. Wutzel, H. Hoffmann, J. Torgersen, R. Liska:
"An overview of anti-oxygen inhibition strategies for LED-based wood coatings";
Vortrag: RadTech Asia 2013,
Shanghai;
20.05.2013
- 24.05.2013; in: "Guide Book",
(2013).
S. Ligon, B. Husar, H. Wutzel, H. Hoffmann, J. Torgersen, R. Liska:
"Assessing anti-oxygen inhibition strategies for LED-based wood coatings by FTIR";
Vortrag: European Symposium of Photopolymer Science - ESPS 2012,
Torino;
04.09.2012
- 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts",
(2012).
S. Ligon, B. Husar, H. Wutzel, J. Torgersen, R. Liska:
"Developing anti-oxygen inhibition strategies for LED-based wood coatings";
Poster: RadTech Europe 2013,
Basel;
15.10.2013
- 17.10.2013; in: "Abstract Book",
(2013),
S. 118.
S. Ligon, J. Kumpfmüller, Z. Li, K. Stadlmann, K. Cicha, A. Ovsianikov, A. Ajami, W. Husinsky, A. Rosspeintner, J. Stampfl, R. Liska:
"Real 3D writing by two photon induced polymerization";
Vortrag: RadTech Europe 2011,
Basel, CH;
18.10.2011
- 20.10.2011; in: "RadTech Europe 2011 - Abstract Book",
(2011),
S. 78.
A. Limbeck, M. Weiss, H. Riedl, P.H. Mayrhofer:
"Development of laser based procedures for stoichiometry analysis of ternary boride thin films";
Vortrag: 2019 European Winter Conference on Plasma Spectrochemistry,
Pau, France;
03.02.2019
- 08.02.2019; in: "Programme",
(2019).
R. Liska, H. Bergmeister, S. Baudis, C. Dworak, C. Heller, N. Moszner, M. Porodec, N.U Pucher, G. Russmüller, V. Schmidt, M. Schulz-Siegmund, M. Schwentenwein, J. Stampfl, F. Varga, G. Weigel:
"Monomers and Photoinitiators for Biomedical Applications";
Vortrag: RadTech Europe 2009,
Nizza, FR;
14.10.2009
- 15.10.2009; in: "Radtech Europe 2009, Proceedings",
(2009),
8 S.
R. Liska, C. Gorsche, A. Gugg, J. Stampfl, N. Moszner:
"Future Perspectives of photopolymerization";
Vortrag: 5th Biomaterialsymposium,
Vienna;
19.11.2012
- 21.11.2012; in: "Abstracts",
J. Stampfl (Hrg.);
(2012),
S. 129.
R. Liska, C. Heller, S. Baudis, M. Schuster, C. Turecek, H. Bergmeister, G. Weigel, M. Schulz, J. Stampfl, F. Varga:
"Biocompatible and biodegradable Photopolymers for Rapid Prototyping";
Vortrag: International Workshop on Biomacromolecules 2008,
Stockholm, S;
01.06.2008
- 04.06.2008; in: "International Workshop on Biomacromolecules 2008, Book of Abstracts",
(2008).
R. Liska, N.U Pucher, C. Heller, M. Schwentenwein, R. Inführ, V. Satzinger, G. Gescheidt, V. Schmidt, F. Varga, J. Stampfl:
"Materials for Stereolithography of Optical and Medical Devices";
Vortrag: EPF 2009, European Polymer Congress,
Graz, A;
12.07.2009
- 17.07.2009; in: "EPF'09, Book of Abstracts",
(2009),
S. 192.
R. Liska, M. Schuster, C. Heller, S. Baudis, N.U Pucher, C. Turecek, V. Schmidt, H. Bergmeister, J. Stampfl, F. Varga, G. Weigel:
"New concepts of biocompatible and biodegradable photopolymers";
Vortrag: European Coatings Conference: "MEDICAL COATINGS AND ADHESIVES",
Berlin, D (eingeladen);
10.04.2008
- 11.04.2008; in: "European Coatings Conference: "MEDICAL COATINGS AND ADHESIVES" Proceedings",
(2008),
S. 117
- 127.
R. Liska, M. Schuster, R. Inführ, C. Turecek, F. Varga, H. Lichtenegger, J. Stampfl:
"Photopolymers for Rapid Prototyping of cellular Biomaterials";
Vortrag: 7th Austrian Polymer Meeting,
Graz, Österreich;
04.07.2005
- 06.07.2005; in: "7th Austrian Polymer Meeting - Final Program",
(2005),
S. 40.
R. Liska, F. Schwager, R. Cano Vives, J. Stampfl:
"New photopolymers for Rapid Prototyping of cellular structures";
Poster: 228th ACS National Meeting,
Philadelphia, USA;
22.08.2004
- 26.08.2004; in: "228th ACS Natinal Meeting Meeting Abstract",
(2004),
S. POLY-327.
R. Liska, F. Schwager, H. Gruber, A. Wöß, A. Pisaipan, J. Stampfl, S. Seidler:
"A new Route for the Fabrication of Biomimetic Cellular Materials";
Vortrag: RadTech Europe 2003,
Berlin, Germany;
03.11.2003
- 05.11.2003; in: "RadTech Europe 2003 Conference Proceedings",
(2003),
ISBN: 3-87870-152-7;
S. 195
- 201.
R. Liska, M. Schwentenwein, S. Baudis, S. Ligon, A. Mautner, A. Gugg, Z. Li, C. Gorsche, N.U Pucher, J. Torgersen, F. Nehl, H. Bergmeister, K. Macfelda, T. Koch, G. Russmüller, J. Stampfl:
"3D-Printing of Advanced Biomaterials by Additive Manufacturing Technologies";
Vortrag: UPAC 9th International Conference on Advanced Polymers via Macromolecular Engineering (APME 2011),
Cappadocia, TR (eingeladen);
05.09.2011
- 08.09.2011; in: "IUPAC 9th International Conference on Advanced Polymers via Macromolecular Engineering (APME 2011) - Program and Abstract Book",
(2011),
S. 101.
R. Liska, M. Schwentenwein, C. Heller, J. Stampfl, G. Russmüller:
"Low toxic monomers based on vinylesters and carbonates for additive manufacturing technology";
Vortrag: Frontiers in Biomedical Polymers 2011,
Funchal, P;
09.05.2011
- 12.05.2011; in: "Ninth International Symposium on Frontiers in Biomedical Polymers",
(2011),
S. 47.
R. Liska, M. Schwentenwein, C. Heller, J. Stampfl, G. Russmüller:
"Printing of a New Generation of Low Toxicity Polymers by Additive Manufacturing Technology for Bone Tissue Engineering";
Vortrag: 4th Joint ESAO IFAO Congress,
Porto, P;
09.10.2011
- 12.10.2011; in: "The International Journal of Artificial Organs",
Wichtig Editore,
Milano
(2011),
ISSN: 0391-3988;
S. 634.
R. Liska, J. Stampfl:
"Hot Lithography: The Bright Fututre of Cationic Photopolymerization";
Vortrag: The 6th (virtual) European Symposium of Photopolymer Science,
Wien;
15.06.2021
- 17.06.2021; in: "vESPS 2021",
(2021),
ISBN: 978-3-9504809-3-1;
S. 51.
O. Liske, P. Dorfinger, R. Gmeiner, S. Baudis, J. Stampfl, R. Liska, S. Knaus:
"Modification of Wheat Straw Soda Lignin for Light-Induced Radical Polymerization Process";
Vortrag: Bypos Workshop 2017,
Zemplínská Sírava, Slovakia;
12.06.2017
- 16.06.2017; in: "Bypos Workshop Book 2017",
(2017),
S. 55.
O. Liske, P. Dorfinger, R. Gmeiner, S. Baudis, J. Stampfl, R. Liska, S. Knaus:
"UV curable materials for 3D printing based on renewable resources";
Vortrag: RadTech Europe Conference & Exhibition 2017,
Prag;
17.10.2017
- 19.10.2017; in: "RadTech Europe Conference & Exhibition 2017",
(2017),
S. 71.
O. Liske, P. Dorfinger, R. Gmeiner, S. Baudis, J. Stampfl, R. Liska, S. Knaus:
"UV Curable Materials from Tailored Lignin (Meth)Acrylates";
Poster: Danube Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017",
Book of Abstracts.com,
(2017),
ISBN: 978-3-9504017-6-9;
S. PO-19.
H. Liu, S. Kang, F. Prinz, J. Stampfl:
"Fabrication of ceramic components for micro gas turbine engines";
Vortrag: 26th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures: B,
Florida;
13.01.2002
- 18.01.2002; in: "Ceramic Engineering & Science Proceedings",
H. Lin, M. Singh (Hrg.);
The American Ceramic Socety,
4
(2002),
S. 43
- 50.
M. Lückl, S. Ilie, J. Six, E. Kozeschnik:
"Surface Microstructure Control Cooling at Continuous Casting";
Vortrag: International Conference on Advances in Metallurgy of Long and Forged Products,
Vail, Colorado, USA;
12.07.2015
- 15.07.2015; in: "Advances in Metallurgy of Long and Forged Products",
AIST,
(2015),
S. 367
- 373.
M. Lückl, S. Ilie, J. Six, E. Kozeschnik:
"Surface Microstructure Control during Continuous Casting of Micro-Alloyed Steel";
Vortrag: Materials Science & Technology 2013,
Montreal;
27.10.2013
- 31.10.2013; in: "Materials Science & Technology 2013 (CDROM)",
(2013),
ISBN: 978-0-87339-762-9;
S. 433
- 438.
S. Lüftl, V. Archodoulaki, T. Koch, S. Seidler:
"Correlation between molar mass and thermal properties of polyoxymethylene (POM) homopolymers";
Poster: Polymeric Materials 2012,
Halle (Saale);
12.09.2012
- 14.09.2012; in: "Abstracts",
(2012),
ISBN: 978-3-86829-517-7;
S. 113.
S. Lüftl, V. Archodoulaki, S. Seidler:
"Ageing Behaviour of Multiple Processed Poly(oxymethylene)";
Poster: Polymerwerkstoffe 2002,
Halle (Saale);
25.09.2002
- 27.09.2002; in: "Polymerwekstoffe 2002",
(2002),
S. 118.
S. Lüftl, V. Archodoulaki, S. Seidler:
"Einfluss der Stabilisierung auf die thermischen eigenschaften von Polyoxymethylen (POM)";
Poster: Werkstoffprüfung 2005,
Berlin (Germany);
01.12.2005
- 02.12.2005; in: "Tagungsband Werkstoffprüfung 2005: Herausforderungen neuer Werkstoffe an die Forschung und Werkstoffprüfung (DVM Bericht 641)",
W. Grellmann (Hrg.);
DVM,
(2005),
ISSN: 1861-8154;
S. 305
- 310.
S. Lüftl, V. Archodoulaki, S. Seidler:
"Thermal-Oxidative Induced Degradation Behaviour of Polyoxymethylene (POM) Detected by TGA-MS";
Vortrag: 2nd International Conference on Polymer Modification, Degraddation and Stabilisation,
Budapest;
30.06.2002
- 04.07.2002; in: "MoDeSt 2002 - Second Int. Conference on Polymer Modifiaction, Degraddation and Stabilisation",
CD
(2002).
S. Lüftl, V. Archodoulaki, S. Seidler, M. Glantschnig:
"Charakterisierung des Einflusses von Farbmasterbatches auf die thermischen und mechanischen Eigenschaften von Bauteilen aus einem Polyoxymethylen(POM)-Copolymer";
Vortrag: 11. Internationale Fachtagung Polymerwerkstoffe 2004,
Halle/Saale;
29.09.2004
- 01.10.2004; in: "Polymeric Materials 2004. Abstracts.",
G. H. Michler (Hrg.);
(2004),
ISBN: 3-928466-68-2;
S. C25.
S. Lüftl, V. Archodoulaki, S. Seidler, M. Glantschnig:
"Influence of Coloration on Photo- and Photooxidative Degradation of Polyoxymethylene (POM)";
Vortrag: 6th Austrian Polymer Meeting,
Wien (Austria);
15.09.2003
- 17.09.2003; in: "6th Austrian Polymer Meeting, Wien (Austria)",
(2003),
S. 71.
S. Lüftl, V. Archodoulaki, S. Seidler, M. Glantschnig:
"Influence of the Specimen Shape on Physical Testing Results of Polyoxymethylene (POM) Exposed to Thermooxidative Stresses";
Poster: 6th Austrian Polymer Meeting, Wien (Austria),
Wien (Austria);
15.09.2003
- 17.09.2003; in: "6th Austrian Polymer Meeting",
(2003),
S. 159.
S. Lüftl, V. Archodoulaki, S. Seidler, M. Glantschnig:
"Influence of the Specimen Shape on Physical Testing Results of Polyoxymethylene (POM) Exposed to Thermooxidative Stresses";
Vortrag: 18th Bratislava International Conference on Modified Polymers (ModPol 2003),
Stara Lesna (Slovakia);
05.10.2003
- 08.10.2003; in: "18th Bratislava International Conference on Modified Polymers (ModPol 2003)",
Stara Lesna (Slovakia)
(2003),
ISBN: 80-968433-2-x;
S. 31.
S. Lüftl, V. Archodoulaki, S. Seidler, T. Koch:
"Effects of the additive package on the thermal properties of a commercial Polyoxymethylene (POM) homopolymer";
Poster: 10. Problemseminar Deformations- und Bruchverhalten von Kunststoffen,
Merseburg (Germany);
15.06.2005
- 17.06.2005; in: "10. Problemseminar Deformations- und Bruchverhalten von Kunststoffen",
(2005),
1 S.
S. Lüftl, V. Archodoulaki, S. Seidler, T. Koch:
"Effects of the additive package on the thermal properties of a commercial Polyoxymethylene (POM) homopolymer";
Vortrag: 7th Austrian Polymer Meeting,
Graz, Austria;
04.07.2005
- 06.07.2005; in: "7th Austrian Polymer Meeting",
Institute for Chemistry and Technology of Organic Materials, Graz University of Technology,
(2005),
S. 53.
M. Lunzer, P. Gruber, K. Hölzl, M. Tromayer, M. Markovic, D. Ossipov, A. Ovsianikov, R. Liska:
"Advances in Two-Photon Initiation Based 3D Printing for Biological Applications";
Vortrag: RadTech Europe Conference & Exhibition 2017,
Prag;
17.10.2017
- 19.10.2017; in: "RadTech EuropeConference & Exhibition 2017",
(2017),
S. 40.
M. Lunzer, D. Ossipov, P. Gruber, K. Hölzl, M. Markovic, A. Ovsianikov, R. Liska:
"Micropatterning of Hydrogels by Sensitized Two-Photon Cleavage of o-Nitrobenzyl Crosslinkages";
Vortrag: Danube Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017",
Book of Abstracts.com,
(2017),
ISBN: 978-3-9504017-6-9;
S. OP-33.
M. Lunzer, D. Ossipov, J. Hilborn, P. Gruber, K. Hölzl, M. Markovic, J. Stampfl, R. Liska, A. Ovsianikov:
"Two-photon degradation of a hyaluronic acid based hydrogel using a two-photon initiator as photosensitizer";
Vortrag: 10th World Biomaterials Congress,
Montreal, Canada;
17.05.2016
- 22.05.2016; in: "Front. Bioeng. Biotechnol. Conference Abstract: 10th World Biomaterials Congress.",
Conference Abstract: 10th World Biomaterials Congress/Frontiers,
(2016).
M. Lunzer, D. Ossipov, J. Hilborn, P. Gruber, K. Hölzl, M. Markovic, M. Tromayer, J. Stampfl, R. Liska, A. Ovsianikov:
"Promoted two-photon induced cleavage of o-nitrobenzyl linkages in a hyaluronic acid based hydrogel by a two-photon initiator";
Vortrag: TERMIS-EU 2016 conference,
Uppsala, Sweden;
28.06.2016
- 01.07.2016; in: "TERMIS-EU 2016 Conference",
European Cells&Materials Journal,
Vol. 31. Suppl. 1, 2016
(2016),
ISSN: 1473-2262;
S. 42.
M. Lunzer, A. Rosspeintner, B. Holzer, D. Lumpi, M. Tromayer, P. Gruber, E. Horkel, A. Ovsianikov, E. Vauthey, R. Liska, J. Fröhlich:
"Triarylamine based Materials as Two Photon Absorption Photoinitiators - Adjustment of Molecular Properties";
Poster: RadTech Europe 2015 Conference,
Prague;
13.10.2015
- 15.10.2015; in: "Abstract Book",
(2015),
S. 84.
M. Lunzer, L. Shi, O.G. Andriotis, P. Gruber, M. Markovic, P.J. Thurner, D. Ossipov, R. Liska, A. Ovsianikov:
"Micromechanical Analysis Of Photolabile Hydrogels Micropatterned By Multiphoton Lithography";
Vortrag: 25th Congress of the European Society of Biomechanics,
Vienna;
07.07.2019
- 10.07.2019; in: "Book of Abstracts of the 25th Congress of the European Society of Biomechanics",
TU Verlag,
(2019),
ISBN: 978-3-903024-96-0;
S. 32.
M. Lunzer, L. Shi, O.G. Andriotis, P. Gruber, M. Markovic, P.J. Thurner, D. Ossipov, R. Liska, A. Ovsianikov:
"Two-Photon Micropatterning of a Photolabile Hydrogel Using a Two-Photon Sensitizer";
Poster: Symposium 'BSTE 2018: Next Generation Tissue Engineering',
Ghent, Belgien;
21.11.2018
- 23.11.2018; in: "BSTE 2018: Next Generation Tissue Engineering",
(2018),
S. PO18.
M. Lunzer, L. Shi, P. Gruber, M. Markovic, D. Ossipov, R. Liska, A. Ovsianikov:
"A Modular Approach to Sensitized Two-Photon Micropatterning of Photolabile Hydrogels";
Poster: 682. WE-Heraeus-Seminar,
Bad Honnef;
25.11.2018
- 28.11.2018; in: "Micro- and Nanostructured Biointerfaces",
(2018),
S. PO17.
M. Lunzer, L. Shi, P. Gruber, M. Markovic, D. Ossipov, R. Liska, A. Ovsianikov:
"Sensitized Two-Photon Micropatterning in Presence of Cells";
Poster: International Conference of Biofabricaton 2018,
Würzburg;
28.10.2018
- 31.10.2018; in: "International Conference of Biofabricaton 2018 Würzburg",
(2018),
S. 42.
M. Lunzer, L. Shi, P. Gruber, M. Markovic, D. Ossipov, A. Ovsianikov, R. Liska:
"Promoted two-photon micropatterning of biocompatible material";
Poster: 5th European Symposium of Photopolymer Science,
Mulhouse, France;
03.09.2018
- 06.09.2018; in: "5th European Symposium of Photopolymer Science",
5th European Symposium of Photopolymer Science,
(2018),
S. P23.
M.H. Luxner, J. Stampfl, H. E. Pettermann:
"Linear and Nonlinear Numerical Investigations of Regular Open Cell Structures";
Vortrag: 2004 ASME International Mechanical Engineering Congress and RD&D Expo,
Anaheim, CA;
13.11.2004
- 20.11.2004; in: "Proceedings of the 2004 ASME International Mechanical Engineering Conference",
ASME, New York,
(2004),
ISBN: 0-7918-4180-4;
Paper-Nr. IMECE2004-62545.
P. Macioł, R. Bureau, C. Poletti, C. Sommitsch, P. Warczok, E. Kozeschnik:
"Agile multiscale modelling of the thermo-mechanical processing of an aluminium alloy";
Vortrag: Buchpräsentation,
Graz;
15.04.2015
- 17.04.2015; in: "Material Forming ESAFORM 2015",
A. Ofenheimer, C. Poletti, D. Schalk-Kitting, C. Sommitsch (Hrg.);
Trans Tech Publications,
Volumes 651-653
(2015),
ISBN: 978-3-03835-471-0.
D. Mandt, P. Gruber, M. Markovic, M. Tromayer, M. Rothbauer, S. Kratz, J. Van Hoorick, P. Dubruel, S. van Vlierberghe, P. Ertl, R. Liska, A. Ovsianikov:
"3D Printed Hydrogels for microfluidici Barrier Models";
Poster: Donau Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Donau Vltava Sava Polymer Meeting 2017",
Book of Abstract,
(2017),
S. PO-20.
M. Marchetti-Deschmann, J. Gahler, V. Archodoulaki, G. Allmaier:
"Ultra-high Molecular Weight Polyethylene (PE-UHMW) Joint Implants - Choosing the Most Valuable Desorption Process (i/vMALDI and DESI) for Imaging MS";
Poster: 58th ASMS Conference on Mass Spectrometry and Allied Topics,
Salt Lake City, UT, USA;
23.05.2010
- 28.05.2010; in: "Proceedings of the 58th ASMS Conference on Mass Spectrometry and Allied Topics",
(2010),
Paper-Nr. TP23 534 (1482),
1 S.
M. Markovic, A. Ovsianikov, V. Mironov:
"Hydrogels for 3D cell culture";
Vortrag: TERMIS-EU 2017: Personalised Therapies for Regenerative Medicine,
Davos;
26.06.2017
- 30.06.2017; in: "eCM Meeting Abstracts 2017, Collection 2: TERMIS-EU 2017 Conference",
eCM Conferences Open Access online periodical,
(2017),
ISSN: 2522-235x;
Paper-Nr. 0055,
1 S.
M. Markovic, J. Van Hoorick, K. Hölzl, M. Tromayer, S. van Vlierberghe, P. Dubruel, R. Liska, A. Ovsianikov:
"Encapsulation oh Human Adipose-Derived Stem Cells in Gelatin-Methacrylate Based Hydrogel for Tissue Engineering Applications";
Poster: Donau Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Donau Vltava Sava Polymer Meeting 2017",
M. Markovic, J. Van Hoorick, K. Hölzl, M. Tromayer, S. Van Vlierberghe, P. Dubruel, R. Liska, A. Ovsianikov (Hrg.);
Book of Abstract,
(2017),
S. PO-21.
M. Markovic, J. Van Hoorick, S. Van Vlierberghe, T. Fowler, O. Hoffmann, P. Dubruel, A. Ovsianikov:
"Seeding 3D CAD scaffolds with photopolymerizable cellhydrogel suspension";
Vortrag: 2014 Tissue Engineering and Regenerative Medicine International Society-Asia Pacific Meeting (TERMIS-AP 2014),
Daegu, S. Korea;
24.09.2014
- 27.09.2014; in: "2014 Tissue Engineering and Regenerative Medicine International Society-Asia Pacific Meeting (TERMIS-AP 2014)",
(2014),
S. #.
E. Marks, G. Requena, H.P. Degischer, T. Buslaps, M. Di Michiel, P. Staron:
"International stresses in a short fiber reinforced Al-Si alloy during thermal cycling and after long isothermal creep";
Vortrag: MECA SENS IV - Conference on Stress Evaluation,
Wien;
24.09.2007
- 26.09.2007; in: "MECA SENS IV - Conference on stress evaluation on materials by neutron or synchrotron radiation (Abstracts)",
(2007),
S. 45.
R. Markut, V. Archodoulaki, S. Seidler:
"PE-UHMW in Hip Implants: Non-Crosslinked and Highly Crosslinked Prosthetic Components";
Vortrag: 1st Joint Austrian & Slovenian Polymer Meeting ASPM 2008 and 9th Austrian Polymer Meeting,
Graz (eingeladen);
26.03.2008
- 28.03.2008; in: "ASPM 2008 - 9th Austrian Polymer Meeting",
(2008),
S. 37.
R. Markut, V. Archodoulaki, S. Seidler:
"PE-UHMWP in hip implants: The influence of crosslinking on structural parameters and micro-mechanical properties";
Poster: 13. International Conference Polymeric Materials 2008,
Halle;
24.09.2008
- 26.09.2008; in: "Polymeric Materials 2008",
(2008),
ISBN: 978-3-940744-17-3;
S. PI-18.
R. Markut, A. Rodriguez, V. Archodoulaki, S. Seidler:
"Werkstoffcharakterisierung und Schadensanalyse von Implantaten aus PE-UHMW";
Vortrag: 11. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Merseburg;
20.06.2007
- 22.06.2007; in: ""11. Problemseminar Deformations- und Bruchverhalten von Kunststoffen"",
(2007),
8 S.
R. Markut-Kohl, V. Archodoulaki, T. Koch, S. Seidler:
"The effect of the consolidation process on structural parameters and micromechanical properties of PE-UHMW";
Poster: 4th International Meeting - UHMWPE for arthroplasty: from powder to debris,
Torino, Italy;
16.09.2009
- 17.09.2009; in: "4th International Meeting - UHMWPE for arthroplasty: from powder to debris;",
(2009).
R. Markut-Kohl, V. Archodoulaki, S. Seidler:
"Eigenschaften vernetzter und konventioneller PE-UHMW Werkstoffe für die orthopädische Anwendung";
Vortrag: 12. Problemseminar Deformation und Bruch,
Merseburg;
24.06.2009
- 26.06.2009; in: "tagungsband_12_Problemseminar",
(2009),
8 S.
R. Markut-Kohl, V. Archodoulaki, S. Seidler:
"Influence of the consolidation and crosslinking processes on the properties of orthopaedic grade PE-UHMW";
Vortrag: European Polymer Congress 2009,
Graz;
12.07.2009
- 17.07.2009; in: "epf´09 european polymer congress",
(2009),
S. 112.
R. Markut-Kohl, V. Archodoulaki, S. Seidler:
"PE-UHMW IN IMPLANTS: Influence of processing on the chemical and physical structure";
Vortrag: 2nd Workshop Biotribology - Bridging Engineering and Medicine; Final Meeting COST 533 Action,
Guimarães, Portugal;
25.05.2009
- 27.05.2009; in: "Biotribology - Bridging Engineering and Medicine",
(2009),
S. 16.
R. Markut-Kohl, V. Archodoulaki, S. Seidler, G. Skrbensky:
"PE-UHMW in der Endoprothetik: Eigenschaften vernetzter und nicht vernetzter Implantatteile";
Vortrag: 3. Wiener Biomaterialsymposium,
Wien;
19.11.2008
- 21.11.2008; in: "3. Wiener Biomaterialsymposium, 19.-21.11.2008",
(2008),
ISBN: 978-3-200-01613-2;
S. 32.
R. Markut-Kohl, T. Koch, V. Archodoulaki, S. Seidler:
"PE-UHMW in hip implants: The influence of crosslinking on structural parameters and micro-mechanical properties";
Poster: Cost 533 Training School,
Paris;
04.05.2009
- 08.05.2009; in: "Cost 533 Training School - Biotribology. Basis And Trends In Medicine And Engineering And Its Societal Impact",
(2009),
1 S.
R. Markut-Kohl, T. Koch, V. Archodoulaki, S. Seidler:
"PE-UHMW in hip implants: The influence of crosslinking on structural parameters and mirco-mechanical properties";
Poster: Junior Scientist Conference,
Wien;
16.11.2008
- 18.11.2008; in: "Junior Scientist Conference 2008: Proceedings",
(2008),
ISBN: 978-3-200-01612-5;
S. 209
- 210.
R. Markut-Kohl, M. Mosbeck, V. Archodoulaki, T. Koch, S. Seidler:
"Hüftpfanneneinsätze aus PE-UHMW: Morphologie und Mechanische Eigenschaften";
Vortrag: 4. Wiener Biomaterialsymposium,
Wien;
15.11.2010
- 17.11.2010; in: "Tagungsband - 4. Wiener Biomaterialsymposium",
(2010),
S. 19.
R. Markut-Kohl, M. Mosbeck, V. Archodoulaki, S. Seidler:
"Charakterisierung des mechanischen Verhaltens von Hüftpfannen aus PE-UHMW";
Vortrag: 13. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Halle-Merseburg;
29.06.2011
- 01.07.2011; in: "13. Problemseminar Deformation und Bruchverhalten von Kunststoffen",
(2011),
6 S.
R. Markut-Kohl, C. Schoberleitner, V. Archodoulaki, S. Seidler, G. Reinisch, A. Kolb:
"Chemical and morphological parameters in crosslinked PE-UHMW: influence of manufacturing and in vivo use on hip implants";
Vortrag: 10th Austrian Polymer Meeting and 2nd Austrian-Slowenian Polymer Meeting,
Leoben;
08.09.2010
- 10.09.2010; in: "ASPM2010 Austrian-Slovenian Polymer Meeting, Leoben 2010: Book of Abstracts",
(2010),
S. 78
- 79.
R. Markut-Kohl, C. Schoberleitner, V. Archodoulaki, S. Seidler, G. Reinisch, A. Kolb:
"Crosslinked PE-UHMW in hip implants: influence of manufacturing and use on structural parameters";
Vortrag: 14th International Conference Polymeric Materials,
Halle (Saale);
15.09.2010
- 17.09.2010; in: "14th International Conference Polymeric Materials",
(2010),
ISBN: 978-3-86829-282-4;
S. 45.
F. Mas, Y.V. Shan, C. Tassin, E. Kozeschnik, F. Roch, P. Todeschini, Y. Brechet:
"Coupled carbon diffusion and precipitation in a dissimilar steel weld: Modelling and Characterization";
Vortrag: TMS 2014,
San Diego USA;
16.02.2014
- 20.02.2014; in: "TMS 2014 143rd Annual Meeting & Exhibition, Annual Meeting Supplemental Proceedings",
Wiley,
(2014),
ISBN: 978-1-118-88972-5.
A. Mautner, S. Ligon, B. Husar, T. Koch, J. Stampfl, R. Liska:
"Vinyl Esters With Improved Reactivity And Toughness";
Vortrag: ESPS 2014,
Vienna;
09.09.2014
- 12.09.2014; in: "3rd European Symposium of Photopolymer Science",
A. Mautner, S. Ligon, B. Husar, T. Koch, J. Stampfl, R. Liska (Hrg.);
(2014),
ISBN: 978-3-9502992-9-8;
S. 71.
A. Mautner, L. Nguyen Pham Duy, S. Knaus, T. Koch:
"Epoxy-Functionalization Of Hd-Pe By Peroxide-Initiated Radical Grafting In Solution And By Reactive Polymer Processing";
Poster: Advances in Polymer Science and Technology 1,
Linz;
08.07.2009
- 10.07.2009; in: "Proceedings of a Conference on Polyolefins and Polymelamines",
Trauner Verlag,
Linz
(2009),
ISBN: 978-3-85499-632-3;
S. 156.
A. Mautner, L. Nguyen Pham Duy, S. Knaus, T. Koch:
"Epoxy-Functionalization of HDPE by Peroxide-Initiated Radical Grafting in Solution and by Reactive Polymer Processing";
Poster: EPF 2009, European Polymer Congress,
Graz, A;
12.07.2009
- 17.07.2009; in: "EPF'09, Book of Abstracts",
(2009),
S. 102.
A. Mautner, X.H. Qin, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"Efficient curing of vinyl esters and vinyl carbonates by thiol-ene polymerization";
Vortrag: RadTech Europe 2011,
Basel, CH;
18.10.2011
- 20.10.2011; in: "RadTech Europe 2011 - Abstract Book",
(2011).
A. Mautner, J. Stampfl, R. Liska:
"Influence of various additives onto the rheological and mechanical behavior of photopolymers";
Poster: European Symposium of Photopolymer Science,
Mulhouse, France;
28.11.2010
- 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book",
(2010).
A. Mautner, J. Stampfl, R. Liska:
"Rheological and mechanical behavior of photopolymers with different additives";
Poster: 10th Austrian Polymer Meeting and 2nd Joint Austrian-Slovenian Polymer Meeting 2010,
Leoben;
08.09.2010
- 10.09.2010; in: "Book of Abstracts",
(2010),
S. 190.
W. Mayer, S. Sackl, Y.V. Shan, S. Primig, E. Kozeschnik:
"Evolution of precipitates and martensite substructure during continuous heat treatment";
Poster: International Conference on Martensitic Transformations,
Bilbao, Spain;
06.07.2014
- 11.07.2014; in: "Materials Today: Proceedings",
Materials Today: Proceedings (2015),
Volume 2, Supplement 3
(2015),
S. 619
- 622.
W. Mayer, Y.V. Shan, E. Povoden-Karadeniz, E. Kozeschnik:
"A model for the disorder → order transformation during Fe3C precipitation in martensite";
Vortrag: PTM 2015 Solid-Solid Phase Transformation in Inorganic Materials,
Whistler;
28.06.2015
- 03.07.2015; in: "Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015",
(2015),
ISBN: 978-0-692-43736-0;
S. 283
- 284.
P.H. Mayrhofer:
"Advances in Design and Architecture of TM-Al-N Coatings for Severe Applications";
Vortrag: 41st International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego, CA (eingeladen);
28.04.2014
- 02.05.2014; in: "Book of abstracts",
(2014).
P.H. Mayrhofer:
"Advances in Ti-Al-N and other Nanocomposite Coatings for Severe Applications";
Vortrag: 13th International Ceramics Congress,
Montecatini (eingeladen);
18.06.2014
- 20.06.2014; in: "Book of Abstracts",
(2014).
P.H. Mayrhofer:
"Advances in Ti-Al-N and related Nanocomposite Coatings for Severe Applications";
Vortrag: 2nd ISTS (International Surface Treatment Symposium),
Istanbul (eingeladen);
25.06.2014
- 27.06.2014; in: "Book of Abstracts",
(2014).
P.H. Mayrhofer:
"Innovative Ceramic-Like Coatings for Tooling, Machining, Aerospace, Energy and Automotive Industry";
Vortrag: 37th International Conference and Exposition on Advanced Ceramics and Composites,
Daytona (eingeladen);
27.01.2013
- 01.02.2013; in: "Book of Abstracts",
(2013).
P.H. Mayrhofer:
"Innovative Hard Coatings for Machining and Wear Protection through Age Hardening and Improved Oxidation Resistance";
Hauptvortrag: Euro PM2013 Congress & Exhibition,
Gothenburg (eingeladen);
15.09.2013
- 18.09.2013; in: "Book of Abstracts",
(2013),
S. 65.
P.H. Mayrhofer:
"Innovative Materials Design for Improved Tribological Performance of Hard Coatings, ÖTG Symposium 2020";
Vortrag: ÖTG Symposium 2020,
Wr. Neustadt (eingeladen);
19.11.2020; in: "TRIBOLOGIE IN INDUSTRIE UND FORSCHUNG - Effizienter durch Kooperation",
(2020),
S. 01
- 02.
P.H. Mayrhofer:
"Microstructural Design and Architecture of Hard Coatings for Severe Applications: An Experimental and Ab Initio Study";
Hauptvortrag: 2nd Austrian-Indian-Symposium on Materials Science and Tribology,
Wiener Neustadt (eingeladen);
26.05.2014
- 29.05.2014; in: "Book of Abstracts",
(2014).
P.H. Mayrhofer:
"Nanostructured Multi-Component Thin Film";
Vortrag: XII International Conference on Nanostructured Materials (NANO 2014),
Moscow (eingeladen);
13.07.2014
- 18.07.2014; in: "Book of Abstracts",
(2014).
P.H. Mayrhofer:
"Physical Vapor Deposition";
Vortrag: Short Course on Hardmetals in Vienna organized by Euro PM,
Vienna (eingeladen);
09.04.2014
- 11.04.2014; in: "Book of Abstracts",
(2014).
P.H. Mayrhofer:
"Strategien für die Entwicklung harter, zäher und stabiler PVD-Hartstoffschichten für Schneidwerkzeuge";
Hauptvortrag: 37. Hagener Symposium mit Fachausstellung,
Hagen (eingeladen);
29.11.2018
- 30.11.2018; in: "Pulvermetallurgie - Neue Herausforderungen und neue Wege",
H. Danninger, L Sigl, Ch Broeckmann (Hrg.);
Heimdall Verlag,
Pulvermetallurgie in Wissenschaft und Praxis, Band 34
(2018),
ISBN: 978-3-946537-54-0;
S. 157
- 188.
P.H. Mayrhofer, D. Holec, M. Bartosik, J. Paulitsch, C. Sabitzer:
"Compositional, structural and mechanical evolution of reactively and non-reactively prepared Zr-Al-N thin films";
Vortrag: 14th International Conference on Plasma Surface Engineering,
Garmisch-Partenkirchen;
15.09.2014
- 19.09.2014; in: "Book of abstracts",
(2014).
P.H. Mayrhofer, D. Holec, F. Klimashin, N. Koutná:
"Nitrides and the Impact of Entropy on their Phase Stability";
Vortrag: 44th International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego;
24.04.2017
- 28.04.2017; in: "ICMCTF 2017",
(2017).
P.H. Mayrhofer, F. Klimashin, N. Koutná, H. Euchner, D. Holec:
"Vacancies as the Key to Excellent Properties Within Mo-Cr-N";
Vortrag: 43rd International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego (USA);
25.04.2016
- 29.04.2016; in: "ICMCTF 2016",
(2016),
S. 25.
P.H. Mayrhofer, D. Sonnleitner, J. Paulitsch, D. Holec:
"Structure, mechanical properties and thermal stability of non-reactively and reactively prepared Zr-Al-N hard coatings";
Vortrag: International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2013,
San Diego;
29.04.2013
- 03.05.2013; in: "Book of Abstracts",
(2013).
P.M. Mayrhofer, H. Euchner, A. Bittner, U. Schmid:
"Circular Patterned Test Structures for Precise Determination of Piezoelectric Thin Film Constants: Application to ScxAl1-xN";
Poster: EUROSENSORS 2014 - 28th European Conference on Solid-State Transducers,
Brescia, I;
07.09.2014
- 10.09.2014; in: "Procedia Engineering",
Elsevier,
87
(2014),
ISSN: 1877-7058;
S. 112
- 115.
Y. Mete, D. Grunenberg, B. Steyrer, J. Stampfl, C. Gorsche, R. Liska:
"A Heterotelechelic Oligomer for Tough Photopolymersvia Hot Lithography";
Poster: 5th European Symposium of Photopolymer Science,
Mulhouse, France;
03.09.2018
- 06.09.2018; in: "5th European Symposium of Photopolymer Science",
5th European Symposium of Photopolymer Science,
(2018),
S. P26.
M. Mitterbauer, P. Knaack, S. Naumov, M. Markovic, A. Ovsianikov, N. Moszner, R. Liska:
"A novel highly reactive Sn-based Type I photoinitiator with excellent photobleaching behavior for long wavelength curing applications";
Poster: 5th European Symposium of Photopolymer Science,
Mulhouse, France;
03.09.2018
- 06.09.2018; in: "5th European Symposium of Photopolymer Science",
5th European Symposium of Photopolymer Science,
(2018),
S. P28.
H. Mohammadian, A. Falahati, H.P. Degischer:
"Investigation of Precipitation Kinetics in Al-Ge-Si by Calorimetry and Dilatometry";
Vortrag: International Doctoral Seminar - Faculty of Materials Science and Technology STU in Trnava (TU Bratislava),
Smolenice Castle, Slovakia;
13.05.2007
- 16.05.2007; in: "Proceedings of International Doctoral Seminar",
Trvana: Alumni Press,
(2007),
ISBN: 978-80-8096-011-7;
8 S.
A. Mohammed, H. Knoblich, A. Kottar, H.P. Degischer, E. Cornelis, P. Schulz, A. Langkamp:
"Continous Carbon Fibre Alignment in Aluminium and Magnesium Matrix Composites";
Vortrag: 11. Internationale Metallographie-Tagung,
Leoben;
11.09.2002
- 13.09.2002; in: "Fortschritte in der Metallographie",
A. Kneissl, F. Jeglitsch (Hrg.);
Werkstoff-Informationsges.m.b.H.,
34
(2003),
ISBN: 3-88355-313-1;
S. 475
- 482.
V. Moraes, H. Bolvardi, S. Kolozsvári, H. Riedl, P.H. Mayrhofer:
"Thermal stability and mechanical properties of Ti-Al-B-N thin films";
Vortrag: Plansee Seminar 2017,
Reutte;
29.05.2017
- 02.06.2017; in: "19th Plansee Seminar 2017",
Plansee Seminar 2017 Proceedings,
(2017),
Paper-Nr. HM 51,
11 S.
V. Moraes, D. Holec, H. Bolvardi, P. Polcik, H. Riedl, P.H. Mayrhofer:
"Ab initio inspired design of ternary boride thin films";
Vortrag: 45th International Conference on Metallurgical Coatings and Thin films,
San Diego;
18.04.2018
- 27.04.2018; in: "Conference Book",
(2018),
S. 50.
V. Moraes, H. Riedl, H. Bolvardi, S. Koloszvári, M. Ikeda, L. Prochaska, S. Paschen, P.H. Mayrhofer:
"Thermal Conductivity and Mechanical Properties of AlN-based Thin Films";
Vortrag: AVS 63rd Symposium & Exhibition,
Nashville, TN, USA;
06.11.2016
- 11.11.2016; in: "AVS 63rd International Symposium & Exhibition",
225304
(2016),
S. 1
- 10.
V. Moraes, H. Riedl, R. Rachbauer, S. Koloszvári, M. Ikeda, L. Prochaska, S. Paschen, P.H. Mayrhofer:
"Thermal conductivity of nitride based thin films";
Poster: 15th International Conference on Plasma Surface Engineering,
Garmisch-Partenkirchen;
12.09.2016
- 16.09.2016; in: "Fifteenth International Conference on Plasma Surface Engineering",
(2016),
S. 110.
V. Moraes, H. Riedl, R. Rachbauer, S. Kolozsvári, M. Ikeda, P.H. Mayrhofer:
"Thermal conductivity of nitride based thin films";
Vortrag: VSS Vienna Young Scientists Symposium 2015,
Wien;
25.06.2015
- 26.06.2015; in: "Book of Abstracts",
Book-of-abstracts.com,
(2015),
ISBN: 978-3-9504017-0-7;
S. 120
- 121.
T. Nam, G. Requena, H.P. Degischer:
"Modelling and numerical computation of thermal expansion of aluminium matrix composite with densely packed SiC particles";
Vortrag: International Conference on Material Theory and Nonlinear Dynamics, Hanoi,
Hanoi/ Vietnam (eingeladen);
24.09.2007
- 26.09.2007; in: "Proceedings of the International Conf. on Material Theory on Nonlinear Dynamics",
(2007),
S. 1
- 9.
T. Nam, G. Requena, H.P. Degischer:
"Numerical Modeling of Thermal Expansion of Al-Based Metal Matrix composites reinforced with SiC particles";
Vortrag: 6th International EUROSIM Congress,
Ljubljana (Laibach)/ Slovenia (eingeladen);
09.09.2007
- 13.09.2007; in: "Proc. EUROSIM 2007",
(2007),
ISBN: 978-3-901608-32-2;
S. 1
- 8.
F. Nehl, S. Baudis, H. Wilhelm, H. Bergmeister, J. Stampfl, R. Liska:
"Mechanical Characterisation of Photoelastomers for Vascular Tissue Regeneration";
Poster: European Symposium of Photopolymer Science,
Mulhouse, France;
28.11.2010
- 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book",
(2010).
F. Nehl, H. Wilhelm, H. Bergmeister, J. Stampfl, R. Liska:
"Mechanical Characteriszation of Photoelastomers for Vascular Tissue Regeneration";
Poster: ESAO - ASAIO Winter School 2011,
Semmering;
26.01.2011
- 29.01.2011; in: "ESAO-ASAIO Winter School",
(2011),
S. 56
- 57.
S. Nestelberger, M Gahleitner, S Piccarolo, Z Kiflie, S Lidauer, T. Koch:
"Polymorphic crystallization of β-nucleated polypropylene in pipe extrusion - comparison between simulation and experiment";
Vortrag: PPS-24, The Polymer Processing 24th Annual Meeting,
Salerno;
15.06.2008
- 19.06.2008; in: "PPS-24, The Polymer Processing Society 24th Meeting, Extended Abstracts",
(2008),
S. S09-161.
E. Neubauer, I. Smid, G. Requena, H.P. Degischer, P. Angerer:
"Thermophysical Properties of Copper Composites Reinforced with Negative CTE fillers";
Vortrag: Proceedings of the 2006 International Conference On Powder Metallurgy & Particulate Materials,
San Diego/ California/ USA;
18.06.2006
- 21.06.2006; in: "Proceedings of the 2006 International Conference On Powder Metallurgy & Particulate Materials",
http://www.mpif.org/Pubs/2006conts.asp?linkid=87,
(2006),
ISBN: 0-9762057-6-9;
S. 9-37
- 9-43.
A. Örs Ünsal, M. Petrica, V. Archodoulaki:
"Effect of Progressive Accelerated Aging on PE-UHMW used in Medical Applications";
Poster: Modest 2016, 9th International Conference on Modification Degradation and Stabilisation of Polymers,
Krakau;
04.09.2016
- 08.09.2016; in: "Modest 2016, 9th International Conference on Modification Degradation and Stabilisation of Polymers",
(2016),
S. 133.
S. Orman, C. Gorsche, C. Hofstetter, S. Baudis, J. Stampfl, R. Liska:
"Biocompatible Photopolymers with Improved Impact Resistance for Additive Manufacturing";
Vortrag: Bypos Workshop 2017,
Zemplínská Sírava, Slovakia;
12.06.2017
- 16.06.2017; in: "Bypos Workshop Book 2017",
(2017),
S. 53.
S. Orman, C. Gorsche, C. Hofstetter, S. Baudis, J. Stampfl, R. Liska:
"Photorheometer with RT-FTIR Coupling as Innovativ Tool to Assess Photopolymers for 3D Printing";
Poster: Danube Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017",
Book of Abstracts,
(2017),
ISBN: 978-3-9504017-6-9;
S. PO 44.
S. Orman, C. Hofstetter, F. Reinauer, A. Aksu, R. Liska, S. Baudis:
"PCL based toughness enhancers for photopolymer based bone substitutes";
Vortrag: 5th European Symposium of Photopolymer Science,
Mulhouse, France;
03.09.2018
- 06.09.2018; in: "5th European Symposium of Photopolymer Science",
5th European Symposium of Photopolymer Science,
(2018),
S. 10.
S. Orman, P. Potzmann, A. Samusjew, B. Husar, M. Schwentenwein, T. Koch, J. Stampfl, R. Liska:
"Photopolymerization Of Biocompatible Composites";
Poster: Photopolymerization Fundamentals 2015,
Boulder;
13.09.2015
- 16.09.2015; in: "Abstract USB",
(2015).
S. Orman, A. Samusjew, B. Husar, T. Koch, J. Stampfl, R. Liska:
"Application Of Thiol-Ene Click Chemistry For Potential Bone Replacement Materials";
Poster: ESPS 2014,
Vienna;
09.09.2014
- 12.09.2014; in: "3rd European Symposium of Photopolymer Science",
(2014),
ISBN: 978-3-9502992-9-8;
S. 196.
A. Ors Unsal, B. Duscher, V. Archodoulaki:
"Characterisation of conventional and crosslinked UHMWPE used in hip joint endoprothesis";
Vortrag: DVSPM 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017 DVSPM",
Austria
(2017),
ISBN: 978-3-9504017-6-9;
S. OP-66.
A. Ovsianikov:
"3D Photoinduced Laser Micropatterning of Polymers for Biomedical Applications";
Vortrag: Biofuture 2011,
Ghent;
16.11.2011
- 18.11.2011; in: "Biofuture 2011",
(2011),
S. 89.
A. Ovsianikov:
"3D Printing and bioprinting with high spatial resolution, challenges and perspectives";
Hauptvortrag: 29th Annual Meeting of the European Society for Biomaterials,
Maastricht (eingeladen);
09.09.2018
- 13.09.2018; in: "EB 2018 Abstract Proceedings",
(2018).
A. Ovsianikov:
"Biomedical applications of multiphoton processing";
Vortrag: SPIE Photonics West 2018,
San Francisco, USA (eingeladen);
29.01.2018
- 30.01.2018; in: "Abstract Book",
(2018),
S. 259.
A. Ovsianikov:
"Engineered cellular microenvironments by two-photon polymerization technique";
Vortrag: 4. Wiener Biomaterialsymposium,
Wien;
15.11.2010
- 17.11.2010; in: "Tagungsband",
J. Stampfl (Hrg.);
(2010),
S. 5.
A. Ovsianikov:
"High Definition 3D Printing of Photopolymers for Biomedical Applications";
Hauptvortrag: 30th Annual Conference of the European Society for Biomaterials,
Dresden (eingeladen);
09.09.2019
- 13.09.2019; in: "ESB 2019 Abstract Booklet",
(2019),
1 S.
A. Ovsianikov:
"High definition bioprinting - An enabling technology for TERM";
Vortrag: TERMIS European Chapter Meeting 2019,
Rhodes Greece (eingeladen);
27.05.2019
- 31.05.2019; in: "TERMIS EU 2019 Conference Book",
(2019),
S. 552.
A. Ovsianikov:
"High Resolution 3D printing for microfluidic and organ-on-chip applications";
Vortrag: SelectBio Biofabrication & Biomanufacturing,
Rotterdam, Holland (eingeladen);
18.06.2019
- 19.06.2019; in: "SelectBio Lab-on-a-Chip & Microfluidics",
(2019),
1 S.
A. Ovsianikov:
"High-Definition Bioprinting Enabled By Light";
Vortrag: Termis - 6th World Congress 2021,
Maastricht Virtual (eingeladen);
15.11.2021
- 19.11.2021; in: "Termis - 6th World Congress 2021",
(2021),
S. 50.
A. Ovsianikov:
"Laser Microfabrication Of 3d Cad Structures From Photosensitive Hydrogel Precursors";
Vortrag: 3rd European Symposium of Photopolymer Science,
Vienna (eingeladen);
09.09.2014
- 12.09.2014; in: ""3rd European Symposium of Photopolymer Science", (2014)",
A. Ovsianikov (Hrg.);
(2014).
A. Ovsianikov:
"Laser photofabrication for biological and tissue engineering applications";
Vortrag: AMBA2014,
Ghent, Belgium;
18.11.2014
- 21.11.2014; in: "Advanced Materials for Biomedical Applications",
(2014).
A. Ovsianikov:
"Laser-based High Resolution 3D Printing";
Hauptvortrag: SelectBio Biofabrication & Biomanufacturing,
Rotterdam, Holland (eingeladen);
20.06.2019
- 21.06.2019; in: "SelecBio Biofabrication & Biomanufacturing",
(2019).
A. Ovsianikov:
"Multiphoton processing - a versatile technology platform for the development of standard biomimetic microenvironments for 3D cell culture";
Vortrag: IBC2014,
SIngapore (eingeladen);
24.07.2014
- 25.07.2014; in: "International Bioprinting Congress",
(2014).
A. Ovsianikov:
"Multiphoton processing technologies for applications in biology and tissue engineering";
Vortrag: Donau Vltava Sava Polymer Meeting 2017,
Wien (eingeladen);
05.09.2017
- 08.09.2017; in: "Donau Vltava Sava Polymer Meeting 2017",
2017 DVSPM,
(2017),
S. IL-28.
A. Ovsianikov:
"Multiphoton processing technologies for biomedical applications: perspective for the next decade";
Vortrag: 15th International Symposium on Laser Precision Microfabrication,
Vilnius;
17.06.2014
- 20.06.2014; in: "15th International Symposium on Laser Precision Microfabrication",
(2014),
S. #.
A. Ovsianikov:
"Structuring Bioinks with Subcellular Resolution";
Poster: International Conference on Biofabrication (Biofabrication 2019),
Columbus, Ohio, USA;
20.10.2019
- 22.10.2019; in: "Abstract Book",
(2019).
A. Ovsianikov, D. Dado-Rosenfeld, S. Nürnberger, S. Levenberg, H. Redl, R. Liska, J. Stampfl:
"Laser fabrication of multi-scale elastic 3D scaffolds";
Vortrag: 3rd TERMIS World Congress,
Wien;
05.09.2012
- 08.09.2012; in: "Journal of Tissue Engineering and Regenerative Medicine",
Wiley,
(2012),
S. 366.
A. Ovsianikov, A. Deiwick, S. Van Vlierberghe, P. Dubruel, J. Stampfl, B. Chichkov:
"Laser fabrication of 3D CAD scaffolds for applications in tissue engineering";
Poster: BioNanoMed 2010,
Krems a.d. Donau;
02.11.2010
- 03.11.2010; in: "BioNanoMed 2010",
M. Malatschnig (Hrg.);
(2010).
A. Ovsianikov et al.:
"Multiphoton processing technologies for engineering of 3D cell-culture matrices";
Hauptvortrag: International Joint Symposium on Advanced Medical and Human Assist Systems and on Technology in Arthroplasty for Floor-Sitting Life Style,
Japan (eingeladen);
08.03.2013; in: "International Joint Symposium on AMHS and on TAFS",
(2013),
S. 137.
A. Ovsianikov, K. Haslinger, X.H. Qin, Z. Li, P. Gruber, J. Torgersen, S. Van Vlierberghe, P. Dubruel, R. Liska, J. Stampfl:
"Laser microfabrication of 3D CAD structures from photosensitive hydrogel precursors";
Vortrag: International Conference on Materials for Advanced Technologies,
Singapore;
30.06.2013
- 05.07.2013; in: "ICMAT 2013 - 7th International Conference on Materials for Advanced Technologies",
(2013),
S. 218.
A. Ovsianikov, F. Nehl, S. Baudis, B. Steyrer, R. Liska, J. Stampfl:
"Microenvironments for the Generation of Bioartificial Tissues";
Vortrag: 24th European Conference on Biomaterials,
Dublin;
04.09.2011
- 08.09.2011; in: "24th European Conference on Biomaterials",
(2011),
S. 97.
A. Ovsianikov, S. Nürnberger, J. Torgersen, Z. Li, H. Redl, R. Liska, J. Stampfl:
"Fabrication of elastic 3D scaffolds by two-photon polymerization";
Vortrag: Materials Science and Engineering 2012,
Darmstadt, Deutschland;
25.09.2012
- 27.09.2012; in: "MSE Programme",
(2012),
S. 37.
A. Ovsianikov, J. Torgersen, Z. Li, J. Stampfl:
"3D photofabrication by femtosecond laser pulses and its applications in biomedicine";
Vortrag: Laser Precision Microfabrication 2011,
Takamatsu, Kagawa, Japan;
07.06.2011
- 10.06.2011; in: "Tagungsband Laser Precision Microfabrication 2011",
(2011),
S. 121.
A. Ovsianikov, J. Torgersen, R. Liska, J. Stampfl:
"3D photofabrication by femtosecond laser pulses and its applications in biomedicine";
Vortrag: 4th European Conference on Applications of Femtosecond Lasers in Materials Science FemtoMat & Nano and Photonics,
Mauterndorf;
14.03.2011
- 18.03.2011; in: "4th European Conference on Applications of Femtosecond Lasers in Materials Science- Femto Mat",
(2011),
S. 4.
A. Ovsianikov, J. Torgersen, X.H. Qin, Z. Li, S Mühleder, W Holnthoner, R. Liska, J. Stampfl:
"Engineering 3D cell-culture matrices with femtosecond laserinduced photochemistry";
Hauptvortrag: 5. Wiener Biomaterialsymposium,
Wien (eingeladen);
19.11.2012
- 21.11.2012; in: "Abstracts 5th Biomaterialsymposium Vienna",
(2012),
S. 15
- 16.
A. Ovsianikov, M. Tromayer, A. Dobos, P. Gruber, M. Markovic, A. Rosspeintner, E. Vauthey, H. Redl, R. Liska:
"Micropattering of Hydrogels by Means of Multiphoton Lithography";
Vortrag: International Symposium on SSS Laser Processing (3S-LP),
Keio University, Yokohama, Japan (eingeladen);
27.02.2019
- 01.03.2019; in: "International Symposium on SSS Laser Processing",
Abstract book,
(2019).
S. Pabisch, B. Feichtenschlager, G. Kickelbick, T. Koch, S. Seidler, H. Peterlik, M Sajjad:
"Structural characterization of surface-functionalized nanoparticles and nanocomposites by SAXS";
Poster: Annual Meeting of The Austrian Physical Society,
Innsbruck;
02.09.2009
- 04.09.2009; in: "Joint Annual Meeting of the Austrian Physical Society",
(2009),
S. 94 (253).
M Palmstingl, D. Salaberger, M Schoßig, T. Koch:
"Acoustic emission and X-Ray computed tomography of short fibre reinforced polypropylene";
Poster: Internationale wissenschaftliche Tagung Polymerwerkstoffe, Polymertec 2014,
Merseburg;
25.06.2014
- 27.06.2014; in: "Internationale wissenschaftliche Tagung Polymerwerkstoffe, Polymertec 2014",
(2014),
4 S.
I. Panaitescu, T. Koch, V. Archodoulaki:
"The Effects Of Temperature, Humidity And Automotive Fluids Exposure On A Glass Fibre/polyurethane Composite";
Poster: DVSPM 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017 DVSPM",
Austria
(2017),
ISBN: 978-3-9504017-6-9;
S. PO-46.
M. Papakyriacou, H. Knoblich:
"Präparationsmethoden und Gefügecharakterisierung von leichten Verbundwerkstoffen vor und nach korrosiver Einwirkung";
Vortrag: 11. Internationale Metallographie-Tagung,
Leoben;
11.09.2002
- 13.09.2002; in: "Fortschritte in der Metallographie",
A. Kneissl, F. Jeglitsch (Hrg.);
Werkstoff-Informationsges.m.b.H.,
34
(2003),
ISBN: 3-88355-313-1;
S. 483
- 490.
J. Pariona Lartiga, T. Koch, S. Seidler:
"Einfluss der Prüfkörperdicke auf die mittels EWF-Methode ermittelten Kennwerte.";
Poster: 11. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Merseburg;
20.06.2007
- 22.06.2007; in: "11. Problemseminar "Deformation und Bruchverhalten von Kunststoffen"",
(2007),
2 S.
J. Paulitsch, C.M. Koller, R. Rachbauer, J. Ramm, P. Polcik, D. Holec, P.H. Mayrhofer:
"Synthesis-structure-property relations of Al-oxide-based coatings";
Vortrag: 41st International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego, CA (eingeladen);
28.04.2014
- 02.05.2014; in: "Book of abstracts",
(2014).
J. Paulitsch, R. Rachbauer, J. Ramm, P. Polcik, P.H. Mayrhofer:
"Influence of Si on the arc evaporation behaviour of Al-Cr targets and structural evolution of (Al0.7Cr0.3)2O3 oxide coatings";
Vortrag: Plansee Seminar 2013,
Reutte;
03.06.2013
- 07.06.2013; in: "Book of Abstracts",
(2013).
J. Paulitsch, R. Rachbauer, J. Ramm, P. Polcik, P.H. Mayrhofer:
"Investigations of arc-evaporated (Al0.7Cr0.3)2O3 coatings from Al-Cr-Si and Al-Cr-Fe targets";
Vortrag: International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2013,
San Diego;
29.04.2013
- 03.05.2013; in: "Book of Abstracts",
(2013),
S. 12.
J. Paulitsch, M. Schlögl, J. Keckes, C. Kirchlechner, M.J. Cordill, P.H. Mayrhofer:
"In-situ studies on crack resistance of CrN-based hard coatings";
Vortrag: EUROMAT 2013,
Sevilla;
08.09.2013
- 13.09.2013; in: "Book of Abstracts",
(2013).
J. Paulitsch, M. Schlögl, C. Kirchlechner, M.J. Cordill, J. Keckes, P.H. Mayrhofer:
"Influence of the Cr to Al ratio on the mechanical properties and thermal stability of CrN-based/AlN multilayer coatings";
Vortrag: THERMEC 2013,
Las Vegas (eingeladen);
02.12.2013
- 06.12.2013; in: "Book of Abstracts Thermec 2013",
(2013).
G. Peer, T. Koch, C. Gorsche, R. Liska:
"New monomers for photopolymerization based on radical cyclopolymerization";
Vortrag: 5th European Symposium of Photopolymer Science,
Mulhouse, France;
03.09.2018
- 06.09.2018; in: "5th European Symposium of Photopolymer Science",
5th European Symposium of Photopolymer Science,
(2018),
S. 13.
P. Peter, A. Pyzalla, W. Reimers:
"Simulation and Exprimental Determination of Deformation Textures and Residual Stress of Cubic and Hexagonal Metals";
Poster: 11. Jahrestagung der Deutschen Gesellschaft für Kristallographie (DGK),
Berlin;
10.03.2003
- 13.03.2003; in: "Humboldt-Universität zu Berlin 11. Jahrestagung der Deutschen Gesellschaft für Kristallographie (DGK) vom 10. bis 13. März 2003 in Berlin",
Oldenbourg Verlag,
München
(2003),
S. 99.
M. Petrica, J. Schenkyr, A. Örs Ünsal, T. Koch, V. Archodoulaki:
"The influence of morphological changes induced by different cooling rates on the wear behaviour of thermoplastics";
Poster: Polymertec16,
Merseburg;
14.06.2016
- 17.06.2016; in: "Polymertec16",
B. Langer, P. Michel (Hrg.);
(2016),
S. 135.
P. Petrochenko, R. Narayan, P. Goering, A. Ovsianikov:
"Laser 3D printing with nanoscale resolution: improving biocompatibility and mitigating toxicity from photoinitiators";
Vortrag: Symposium on Toxicity Associated with Nanomaterials,
USA;
16.12.2013; in: "Symposium on Toxicity Associated with Nanomaterials",
(2013).
M. Pfaffinger, G. Mitteramskogler, R. Gmeiner, J. Stampfl:
"Thermal Debinding of Ceramic-filled Photopolymers";
Poster: 20. Symposium Verbundwerkstoffe und Werkstoffverbunde 2015,
Wien;
01.07.2015
- 03.07.2015; in: "20th Symposium on Composites",
C. Edtmaier, G. Requena (Hrg.);
Materials Science Forum,
Vols. 825-826
(2015),
ISBN: 978-3-03835-515-1;
S. 75
- 81.
M. Pfleger, A. Berg, T. Koch, J. Stampfl:
"Korrelation des MR-Parameters T2* und den mechanischen Messgrößen Eindringhärte und Eindringmodul";
Poster: 2. Wiener Biomaterialsymposium,
TU Wien;
22.11.2006
- 24.11.2006; in: "2. Wiener Biomaterialsymposium",
(2006),
1 S.
H. Pinto, S. Stuke, A. Pyzalla, W. Hübner, K. Aßmus:
"Vergleich der Verformungsmechanismen beim Tieftemperaturverschleiß der austenitischen Stähle 1.4301 und 1.4439";
Vortrag: 44. Tribologie-Fachtagung 22. bis 24. September 2003 in Göttingen Reibung, Schmierung und Verschleiß Forschung und praktische Anwendung Band I,
Göttingen Deutschland;
22.09.2003
- 24.09.2003; in: "Reibung, Schmierung und Verschleiß Forschung und praktische Anwendung",
1 / Göttingen Deutschland
(2003),
ISBN: 3-00-003404-8;
S. 7/1
- 7/9.
E. Pippel, J. Woltersdorf, M. Doktor, H.P. Degischer:
"Structure, composition, and properties of interlayers in carbon fiber reinforced aluminum wires";
Vortrag: 7th Conference of the European Ceramic Society,
Brügge;
09.09.2001
- 13.09.2001; in: "Key Engineering Materials",
Trans Tech Publications Ltd,
Vols. 206-213
(2002),
S. 625
- 628.
C. Poletti:
"Ti und Ti-Legierungen mit Teilchenverstärkung";
Vortrag: Materialica 2007,
München;
17.10.2007
- 18.10.2007; in: "Materialica 2007. Light Metal",
(2007),
27 S.
C. Poletti:
"Werkstoffauswahl für Leichtbau";
Vortrag: ASMET Seminar Leichtbau,
Wien;
24.09.2009
- 25.09.2009; in: "Seminar Leichtbau",
(2009),
31 S.
C. Poletti, H.P. Degischer:
"Characterization of Ti-6Al-4V modified with B";
Poster: EUCOMAS 2009,
Augsburg, Deutschland;
01.07.2009
- 02.07.2009; in: "European Conference on Materials in Aerospace 2009",
VDI Wissensforum GmbH (Hrg.);
(2009),
S. 1
- 6.
C. Poletti, H.P. Degischer:
"Werkstoffauswahl";
Vortrag: ALWS-Austrian Light Weight Structures, Seminar Leichtbau, 12./13.April 2007,
Ranshofen;
12.04.2007
- 13.04.2007; in: "Leichtbau: Prinzipien, Werkstoffauswahl und Fertigungsvarianten (Seminarunterlagen)",
Kapitel 4
(2007),
S. 1
- 15.
C. Poletti, S. Kremmer:
"Hot Formability of Particle reinforced Ti-Alloys";
Poster: 12th European Conference on Composite Materials,
Biarritz, France;
29.08.2006
- 01.09.2006; in: "Proceedings of the 12th European Conference on Composite Materials",
(2006),
9 S.
C. Poletti, S. Kremmer, H.P. Degischer:
"Hot deformation studies on discontinuously reinforced Ti-Alloys";
Vortrag: Titanium 2006 Conference,
San Diego, California;
01.10.2006
- 03.10.2006; in: "Proceedings of the Titanium 2006 Conference",
(2006),
8 S.
C. Poletti, W. Marketz, H.P. Degischer:
"Fließverhalten teilchenverstärkter Ti-Legierungen bei erhöhten Temperaturen";
Vortrag: 15. DGM-Symposium Verbundwerkstoffe und Werkstoffverbunde,
Kassel (Germany);
06.04.2005
- 08.04.2005; in: "Verbundwerkstoffe und Werkstoffverbunde",
M. Schlimmer (Hrg.);
(2005),
ISBN: 3-88355-340-9;
S. 63
- 68.
C. Poletti, W. Marketz, H.P. Degischer:
"Hot Formability of a Particle Reinforced Ti-Alloy";
Vortrag: Ti-2003 - 10th World Conference on Titanium,
Hamburg;
13.07.2003
- 18.07.2003; in: "Ti-2003 Science and Technology",
G. Lütjering, J. Albrecht (Hrg.);
Wiley-VCH,
Weinheim, Germany
(2004),
ISBN: 3-527-30306-5;
S. 2531
- 2538.
C. Poletti, W. Marketz, H.P. Degischer:
"Processing maps and flow stability criterion for Ti-Matrix Composites";
Vortrag: Euromat 2005,
Prague (Czech Republic);
05.09.2005
- 08.09.2005; in: "http://www.dgm.de/past/2005/euromat2005/programme/index.htm",
(2005),
1 S.
C. Poletti, P. Sherstnev, M. Schöbel, C. Sommitsch:
"Substructure Development of AA6082 During Hot Deformation";
Vortrag: International Conference on Aluminium Alloys (ICAA11),
Aachen, Germany;
22.09.2008
- 28.09.2008; in: "Aluminium Alloys",
Wiley-VCH,
Volume 1
(2008),
ISBN: 978-3-527-32367-8;
S. 691
- 697.
C. Poletti, F. Warchomicka, S. Kremmer, M. Stockinger, H.P. Degischer:
"Local deformation of Ti alloys and Ti matrix composites";
Vortrag: 11 th World Conference on Titanium,
Kyoto/ Japan;
03.06.2007
- 07.06.2007; in: "Proceeding of Ti-2007, The 11th World Conference on Titanum",
(2007),
S. 595
- 598.
A. Porabka, K. Jurkowski, J. Laska, F. Stadlbauer, V. Archodoulaki:
"Determination of the Influence of Fly Ash Particles on the Properties of Low-Density Polyethylene";
Poster: ICSAAM 2013,
Island of Kos Greece;
23.09.2013
- 26.09.2013; in: "ICSAAM 2013, Conference Proceedings",
(2013),
2 S.
M. Porodec, C. Heller, R. Liska, J. Stampfl, M. Hacker:
"Covalent modification of photo-cross-linkable polymers for bone tissue engineering using a model protein";
Poster: International Workshop on Biomacromolecules 2008,
Stockholm, S;
01.06.2008
- 04.06.2008; in: "International Workshop on Biomacromolecules 2008, Book of Abstracts",
(2008).
M. Porodec, C. Heller, R. Liska, J. Stampfl, M. Hacker, M. Schulz-Siegmund:
"Surface Immobilization of model protein onto new photo cross-linkable materials";
Poster: 3. Wiener Biomaterialsymposium,
Wien;
19.11.2008
- 21.11.2008; in: "3. Wiener Biomaterialsymposium - Tagungsband",
(2008),
ISBN: 978-3-200-01613-2;
S. 60.
P. Potzmann, X.H. Qin, S. Mühleder, W. Holnthoner, H. Redl, J. Stampfl, A. Ovsianikov, R. Liska:
"Development of a novel photocurable hydrogel precursor";
Poster: RadTech Europe 2013,
Basel;
15.10.2013
- 17.10.2013; in: "Abstract Book",
(2013),
S. 121.
P. Potzmann, X.H. Qin, N.U Pucher, J. Torgersen, S. Mühleder, W. Holnthoner, H. Redl, J. Stampfl, A. Ovsianikov, R. Liska:
"High-precision manufacturing of 3D hydrogel scaffolds via two-photon polymerization";
Poster: RadTech Europe 2013,
Basel;
15.10.2013
- 17.10.2013; in: "Abstract Book",
(2013),
S. 117.
P. Potzmann, X.H. Qin, N.U Pucher, J. Torgersen, S. Mühleder, W. Holnthoner, H. Redl, J. Stampfl, A. Ovsianikov, R. Liska:
"Micrometer-scale precise 3D hydrogel scaffolds prepared by two-photon polymerization";
Poster: Photopolymerization Fundamentals 2013,
Jackson Hole;
22.09.2013
- 25.09.2013; in: "Book of Abstracts",
(2013).
P. Potzmann, K. Seidler, S. Ligon, T. Koch, J. Stampfl, R. Liska:
"New building blocks for thermoplastic polyurethane elastomers for soft tissue engineering";
Poster: The 3rd TERMIS World Congress 2012,
Vienna;
05.09.2012
- 08.09.2012; in: "Journal of Tissue Engineering and Regenerative Medicine 2012",
John Wiley & Sons, Ltd.,
6/Supplement s1/
(2012),
ISSN: 1932-7005;
S. 215.
P. Potzmann, K. Seidler, S. Ligon, T. Koch, J. Stampfl, B. Messner, C. Grasl, H. Bergmeister, H. Schima, R. Liska:
"Thermoplastic polyurethane elastomers derived from new building blocks for vascular tissue engineering";
Vortrag: Austrian - Slovenian Polymer Meeting - ASPM 2013,
Bled;
03.04.2013
- 05.04.2013; in: "The Proceedings of the Austrian - Slovenian Polymer Meeting - ASPM 2013",
M. Zigon, T. Rajsp (Hrg.);
(2013),
ISBN: 978-961-269-992-5;
S. 37
- 38.
R. Potzmann, X.H. Qin, S. Mühleder, W. Holnthoner, H. Redl, J. Stampfl, A. Ovsianikov, R. Liska:
"Hyaluron vinyl esters as novel precursors for photocurable hydrogels";
Poster: Photopolymerization Fundamentals 2013,
Jackson Hole;
22.09.2013
- 25.09.2013; in: "Book of Abstracts",
(2013).
E. Povoden-Karadeniz, E. Kozeschnik:
"Coupling of computational thermodynamics with kinetic models for predictive simulations of materials properties";
Vortrag: THERMEC´2016,
Graz (eingeladen);
29.05.2016
- 03.06.2016; in: "Thermec 2016",
C. Sommitsch et al. (Hrg.);
Trans Tech Publications Inc.,
Materials Science Forum, Volume 879
(2017),
ISBN: 978-3-0357-1129-5;
S. 1513
- 1518.
E. Povoden-Karadeniz, P. Lang, K. Öksüz, W. Jun, S. Rafiezadeh, A. Falahati, E. Kozeschnik:
"Thermodynamics-integrated simulation of precipitate evolution in Al-alloys";
Vortrag: 6th international Light Metals Technology Conference (LMT 2013),
Old Windsor, UK;
24.07.2013
- 26.07.2013; in: "Light Metals Technology 2013",
I. Stone, B. McKay (Hrg.);
Materials Science Forum,
765
(2013),
ISSN: 1662-9752;
S. 476
- 480.
N. Pucher, C. Heller, B. Seidl, R. Inführ, L. Kuna, A. Haase, V. Schmidt, H. Lichtenegger, J. Stampfl, R. Liska:
"Two Photon Initiated Polymerization by Inones";
Poster: RadTech Europe 2007 - Europe´s event for UV/EB curing, Vienna 13-15 Nov 2007,
Wien;
13.11.2007
- 15.11.2007; in: "RadTech Europe 2007 - Conference Proceedings",
(2007),
7 S.
N. Pucher, C. Heller, B. Seidl, L. Kuna, A. Haase, V. Schmidt, H. Lichtenegger, J. Stampfl, R. Liska:
"New Initiators for Two-Photon Photopolymerization";
Poster: 8th Austrian Polymer Meeting,
Linz;
20.09.2006
- 22.09.2006; in: "8th Austrian Polymer Meeting - The Chain of Knowledge - From Catalyst to Application",
(2006).
N.U Pucher, S. Baudis, C. Heller, M. Schuster, V. Satzinger, V. Schmidt, H. Lichtenegger, J. Stampfl, R. Liska:
"Fabrication of Biocompatible and Cellular Polymers with Sub-Micrometer Feature Resolution by means of Two-Photon Induced Photopolymerization";
Poster: International Workshop on Biomacromolecules 2008,
Stockholm, S;
01.06.2008
- 04.06.2008; in: "International Workshop on Biomacromolecules 2008, Book of Abstracts",
(2008).
N.U Pucher, R. Inführ, S. Bashir, V. Satzinger, V. Schmidt, W. Husinsky, H. Lichtenegger, J. Stampfl, R. Liska:
"Two-Photon Induced Photopolymerization - A Powerful Tool for Precise 3D Submicrofabrication";
Vortrag: 9th Austrian Polymer Meeting,
Graz, A;
26.03.2008
- 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts",
(2008),
S. 11.
N.U Pucher, S. Krivec, N. Matsko, N. Galler, T. Koch, V. Satzinger, V. Schmidt, W. Grogger, H. Lichtenegger, R. Liska:
"Photopolymerizable Waveguides in Flexible Sol-Gel Cladding Materials";
Vortrag: RadTech Europe 2009,
Nizza, FR;
14.10.2009
- 15.10.2009; in: "Radtech Europe 2009, Proceedings",
(2009),
6 S.
N.U Pucher, A. Rosspeintner, S. Kontur, A. Ajami, W. Husinsky, G. Gescheidt, J. Stampfl, R. Liska:
"Photochemistry and Photophysics of Two-Photon Initiators";
Vortrag: RadTech Europe 2009,
Nizza, FR;
14.10.2009
- 15.10.2009; in: "Radtech Europe 2009, Proceedings",
(2009),
6 S.
N.U Pucher, A. Rosspeintner, V. Satzinger, V. Schmidt, G. Gescheidt, J. Stampfl, R. Liska:
"Evaluation of Triple Bond Containing Photoinitiators for the Two-Photon Induced Photopolymerization Process";
Vortrag: RadTech Europe 2009,
Nizza, FR;
14.10.2009
- 15.10.2009; in: "Radtech Europe 2009, Proceedings",
(2009),
6 S.
A. Pyzalla:
"New Possibilities in Stress and Strain Analyses with Synchrotron Radiation and Neutrons";
Vortrag: 22nd European Crystallographic Meeting, ECM22,
Budapest, Ungarn (eingeladen);
27.08.2004; in: "Acta Crystallographica",
A60
(2004),
ISSN: 0108-7673;
S. 73.
A. Pyzalla, B. Camin, T. Buslaps, M. Di Michiel, B. Lehrer, M. Wichert, W. Reimers:
"Synchrotronstrahlung zur Charakterisierung von Metallmatrix-Verbundwerkstoffen";
Vortrag: 15. DGM-Symposium Verbundwerkstoffe und Werkstoffverbunde,
Kassel (eingeladen);
06.04.2005
- 08.04.2005; in: "Verbundwerkstoffe und Werkstoffverbunde",
M. Schlimmer (Hrg.);
MATINFO Werkstoffinformationsgesellschaft,
Frankfurt
(2005),
S. 409
- 414.
A. Pyzalla, M. Dumont, N. Zöger, C. Streli, P. Wobrauschek, M. Sander:
"Synchrotron XRF analysis of element distribution in fossilized sauropod dinosaur bones";
Vortrag: Denver X-Ray Conference,
Denver Colorado;
04.08.2008
- 08.08.2008; in: "Proceedings of the 57th Annual Conference on Applications of X-ray Analysis (Denver X-ray Conference) and the 8th International Conference on Residual Stresses (ICRS-8)",
Advances in X-ray Analysis,
52
(2008),
ISSN: 1097-0002;
S. 120
- 128.
A. Pyzalla et al.:
"Mechanical Stress in Tribo-Layers";
Vortrag: 14th International Colloquium Tribology,
Ostfildern (eingeladen);
13.01.2004
- 15.01.2004; in: "Tribology and Lubrication Engineering, Volume 1",
W.J. Bartz (Hrg.);
Technische Akademie Esslingen,
(2004),
ISBN: 3-924813-54-x;
S. 85
- 89.
L. Qin, A. Redermeier, E. Kozeschnik:
"A statistical methodology to reconstruct nucleation pathways in the Fe-Cu system";
Vortrag: THERMEC´2016,
Graz;
29.05.2016
- 03.06.2016; in: "THERMEC 2016",
Trans Tech Publications Inc.,
Materials Science Forum, Volume 879
(2017),
ISBN: 978-3-0357-1129-5;
S. 1529
- 1534.
X.H. Qin, P. Esfandiari, S. Ligon, A. Ovsianikov, R. Liska:
"Storage Stable Thiol-Ene Formulations and advances applications thereof";
Vortrag: RadTech Europe 2013,
Basel (eingeladen);
15.10.2013
- 17.10.2013; in: "Abstract Book",
(2013),
S. 14.
X.H. Qin, B. Husar, J. Torgersen, S. Mühleder, W. Holnthoner, H. Redl, J. Stampfl, A. Ovsianikov, R. Liska:
"Biodegradable 3D Hydrogels Scaffold by Two-Photon Polymerization";
Poster: 25th European Conference on Biomaterials,
Madrid;
08.09.2013
- 12.09.2013; in: "Book of contributions",
(2013),
ISBN: 978-84-695-7831-5.
X.H. Qin, B. Husar, J. Torgersen, S. Mühleder, W. Holnthoner, H. Redl, J. Stampfl, A. Ovsianikov, R. Liska:
"Gelatin/Albumin-Based Hydrogels Scaffolds By Two-Photon Polymerization";
Vortrag: TERMIS-EU 2013,
Istanbul;
17.06.2013
- 20.06.2013; in: "Abstracts",
(2013),
S. 195.
X.H. Qin, Z. Li, S. Ligon, J. Torgersen, A. Ovsianikov, S. Mühleder, W. Holnthoner, J. Stampfl, R. Liska:
"Biodegradable 3D Hydrogel Scaffolds: Synthesis and Two-photon Polymerization";
Poster: E-MRS 2012 FALL MEETING (European Materials research Society),
Warschau;
17.09.2012
- 21.09.2012; in: "E-Mrs 2012 Fall Meeting",
(2012).
X.H. Qin, Z. Li, A. Ovsianikov, J. Torgersen, S. Mühleder, W. Holnthoner, J. Stampfl, R. Liska:
"Developing biodegradable 3D hydrogel scaffolds: from synthesis to two-photon polymerization";
Poster: European Symposium of Photopolymer Science - ESPS 2012,
Torino;
04.09.2012
- 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts",
(2012),
S. 19.
X.H. Qin, Z. Li, J. Torgersen, A. Ovsianikov, S. Mühleder, W. Holnthoner, J. Stampfl, R. Liska:
"Developing Biodegradable 3D Hydrogels Scaffolds: From Synthesis to Two-photon Polymerization";
Poster: The 3rd TERMIS World Congress 2012,
Vienna;
05.09.2012
- 08.09.2012; in: "Journal of Tissue Engineering and Regenerative Medicine 2012",
John Wiley & Sons, Ltd.,
6/Supplement s1/
(2012),
ISSN: 1932-7005;
S. 369.
X.H. Qin, Z. Li, J. Torgersen, A. Ovsianikov, S. Mühleder, W. Holnthoner, J. Stampfl, R. Liska:
"Development of biocompatible 3D hydrogel scaffolds: From synthesis to two-photon-polymerization";
Poster: 5th Biomaterialsymposium,
Vienna;
19.11.2012
- 21.11.2012; in: "Abstracts",
J. Stampfl (Hrg.);
(2012),
S. 65.
X.H. Qin, S. Mühleder, P. Gruber, A. Ovsianikov, H. Redl, R. Liska:
"Design and Synthesis of a Novel Hydrogel Precursor: hyaluronate vinyl esters";
Poster: Advances in Tissue Regeneration 2013,
Lattrop;
14.11.2013
- 15.11.2013; in: "Advances in Tissue Regeneration 2013",
(2013).
X.H. Qin, S. Mühleder, J. Torgersen, A. Ovsianikov, H. Redl, J. Stampfl, R. Liska:
"3D construction of artifical ECM hydrogels by two-photon-induced polymerization";
Vortrag: Advances in Tissue Regeneration 2013,
Lattrop;
14.11.2013
- 15.11.2013; in: "Advances in Tissue Regeneration 2013",
(2013).
X.H. Qin, A. Ovsianikov, H. Redl, R. Liska:
"Development of a novel cytocompatible and photopolymerizable hydrogel precursor: hyaluronate vinyl ester";
Poster: 19th Swiss Conference on Biomaterials,
Davos;
25.06.2013
- 26.06.2013; in: "Program & Abstract",
D. Eglin, M. D´Este, D. Schraner (Hrg.);
(2013),
S. 19.
X.H. Qin, Z. Tomasikova, P. Gruber, B. Plochberger, M. Markovic, A. Ovsianikov, J. Stampfl, R. Liska:
"Two-Photon Microfabrication Of Biomimetic Hydrogel Constructs For Tissue Regeneration";
Vortrag: ESPS 2014,
Vienna;
09.09.2014
- 12.09.2014; in: "3rd European Symposium of Photopolymer Science",
(2014),
ISBN: 978-3-9502992-9-8;
S. 129.
X.H. Qin, J. Torgersen, C. Heller, M. Schwentenwein, G. Russmüller, J. Stampfl, R. Liska:
"Two-photon induced Polymerization for 3D Microfabrication of Biocompatible and Biodegradable Hydrogels";
Poster: European Symposium of Photopolymer Science,
Mulhouse, France;
28.11.2010
- 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book",
(2010).
X.H. Qin, J. Torgersen, S. Mühleder, W. Holnthoner, A. Ovsianikov, J. Stampfl, H. Redl, R. Liska:
"Two-photon microfabrication of artificial ECM hydrogel via thiol-ene chemistry";
Vortrag: 19th Swiss Conference on Biomaterials,
Davos;
25.06.2013
- 26.06.2013; in: "Program & Abstract",
D. Eglin, M. D´Este, D. Schraner (Hrg.);
(2013),
S. 19.
X.H. Qin, J. Torgersen, N.U Pucher, A. Mautner, Z. Li, A. Ovsianikov, J. Stampfl:
"Multiphoton Fabrication of Protein Hydrogels in 3-dimensions via Thiol-ene Photo-click Reactions";
Vortrag: The 9th World Biomaterials Congress,
Chengdu, China;
01.06.2012
- 05.06.2012; in: "9th World Biomaterials Congress",
(2012),
S. 1.
X.H. Qin, J. Torgersen, L. Zhiquan, A. Ovsianikov, C. Heller, M. Schwentenwein, G. Russmüller, J. Stampfl, R. Liska:
"Two-photon induced polymerization for 3D fabrication of Biocompatible and Biodegradable hydrogels";
Poster: 4. Wiener Biomaterialsymposium: Von der Werkstoffentwicklung bis zur klinischen Anwendung,
TU Wien, Wien;
15.11.2010
- 17.11.2010; in: "Tagungsband",
(2010),
S. 56.
R. Raab, S. Kolozsvári, R. Rachbauer, P.H. Mayrhofer:
"Influence of multilayer arrangement on structure and mechanical properties of arc evaporated oxide, nitride, and oxide/nitride coatings within the systems Al-Cr-N and Al-Cr-O";
Vortrag: 43rd International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego (USA);
25.04.2016
- 29.04.2016; in: "43rd ICMCTF International Conference on Metallurgical Coatings and Thin Films",
(2016),
S. 49.
R. Raab, C. Sabitzer, S. Kolozsvári, R. Rachbauer, P.H. Mayrhofer:
"MULTILAYER ARRENGEMENT OF OXIDE AND NITRIDE CAOTINGS WITHIN THE SYSTEM Al-Cr-N AND Al-Cr-O";
Vortrag: VSS Vienna Young Scientists Symposium 2015,
Wien;
25.06.2015
- 26.06.2015; in: "VSS Vienna Young Scientists Symposium",
Book-of-abstracts.com,
(2015),
ISBN: 978-3-9504017-0-7;
S. 150
- 151.
R. Rachbauer, D. Kurapov, M. Arndt, M. Bartosik, P.H. Mayrhofer:
"Impact of structure and morphology on thermal properties of AlTiN based hard coatings";
Vortrag: 14th International Conference on Plasma Surface Engineering,
Garmisch-Partenkirchen;
15.09.2014
- 19.09.2014; in: "Book of Abstracts",
(2014).
R. Radis, E. Kozeschnik:
"Die Ausscheidungskinetik von Aluminiumnitrid in Austenit in mikrolegierten Stählen";
Vortrag: 10. Werkstofftagung: Verarbeitungs- und Gebrauchseigenschaften von Werkstoffen - Heute und Morgen,
TU Graz;
28.03.2008; in: "10. Werkstofftagung: Verarbeitungs- und Gebrauchseigenschaften von Werkstoffen - Heute und Morgen",
(2008),
S. 89
- 91.
R. Radis, E. Kozeschnik:
"Kinetics of AlN Precipitation in the Ferrite Phase Field of Microalloyed (HSLA) Steels";
Poster: TMS Meeting,
Seattle, USA;
13.02.2010
- 18.02.2010; in: "Proceedings of 139th Annual Meeting & Exhibition TMS, Vol. 2: Materials Characterization, Computation, Modeling and Energy",
(2010),
S. 341
- 348.
R. Radis, E. Kozeschnik:
"Numerical analysis of AlN precipitation kinetics in microalloyed austenite";
Vortrag: Asia Steel 2009,
Busan;
24.05.2009
- 27.05.2009; in: "Proc. Asia Steel 2009",
(2009),
S. S13-24.
R. Radis, E. Kozeschnik:
"Precipitation Kinetics of Aluminium Nitride in Austenite in Microalloyed HSLA Steels";
Vortrag: The V International Materials Symposium,
Lissabon, Portugal;
05.04.2009
- 08.04.2009; in: "Proceedings of the V International Symposium - Materias 2009",
(2009),
Paper-Nr. 224,
6 S.
R. Radis, E. Kozeschnik:
"Simulation of Concurrent AlN and VN Precipitation During Thermal Treatment of Microalloyed Steels";
Vortrag: 3rd International Conference on Simulation and Modelling of Metallurgical Processes in Steelmaking STEELSIM,
Leoben;
08.11.2009
- 10.11.2009; in: "Proceedings of 3rd STEELSIM Conference",
(2009),
S. 326
- 331.
R. Radis, M. Schaffer, M. Albu, G. Kothleitner, P. Pölt, E. Kozeschnik:
"Evolution of Size and Morphology of Gamma´ Precipitates in UDIMET 720 Li During Continuous Cooling";
Poster: 11th International Symposium on Superalloys,
Seven Springs Mountain Resort, Pennsylvania, USA;
14.11.2008
- 18.11.2008; in: "SUPERALLOYS 2008",
(2008),
ISBN: 978-0-87339-728-5;
S. 829
- 836.
R. Radis, G. Zickler, M. Stockinger, C. Sommitsch, E. Kozeschnik:
"Interaction of the Precipitation Kinetics of Delta and Gamma Prime Phases in Nickel-Base Superalloy ATI Allvac 718 Plus";
Vortrag: International Conference on Processing & Manufacturing of Advanced Materials - THERMEC 2009,
Berlin, Germany;
24.08.2009
- 29.08.2009; in: "THERMEC ´2009 - International Conference on Processing & Manufacturing of Advanced Materials",
(2009),
6 S.
R. Radis, G. Zickler, M. Stockinger, C. Sommitsch, E. Kozeschnik:
"Numerical Simulation of the Simultaneous Precipitation of Delta and Gamma Prime Phases in the Ni-Base Superalloy ATI Allvac 718 Plus";
Vortrag: 7th International Symposium on Superalloy 718 and Derivatives,
Pittsburgh, USA;
09.10.2010
- 13.10.2010; in: "Proceedings of the 7th International Symposium on Superalloy 718 and Derivatives",
Wiley,
New Jersey, USA
(2010),
ISBN: 978-0-47094-316-8;
10 S.
B. Raeisinia, T. Piroteala, E. Kozeschnik, P. Warczok, P. Nolan:
"Bringing the science of precipitation in aluminum alloys to the shop floor";
Vortrag: TMS 2015,
Orlando, Florida;
15.05.2015
- 19.05.2015; in: "TMS 2015 Supplement Proceedings",
Wiley,
(2015),
ISBN: 978-1-119-08241-5.
M. Rath, E. Povoden-Karadeniz, E. Kozeschnik:
"Precipitation kinetic modeling of the new eta-phase Ni6AlNb in Ni-base superalloys";
Poster: 13th International Symposium on Superalloys,
Seven Springs, Pennsylvania;
11.09.2016
- 15.09.2016; in: "Superalloys 2016: Proceedings of the 13th International Symposium on Superalloys",
TMS (The Minerals, Metals & Materials Society),
(2016),
S. 97
- 105.
T. Rath, B. Steyrer, R. Addison, E. Holzhausen, J. Stampfl:
"Developing a new Substitute for Ivory using Lithography-based Additive Manufacturing";
Vortrag: Vienna young Scientists Symposium VSS 2019,
Wien;
13.06.2019
- 14.06.2019; in: "VSS Vienna young Scientists Symposium",
H.A. Krebs (Hrg.);
(2019),
ISBN: 978-3-9504017-9-0;
S. 154
- 155.
A. Redermeier, E. Kozeschnik:
"Bridging the Gap between Ab Initio and Large Scale Studies - A Monte Carlo Study of Cu Precipitation in Fe";
Vortrag: THERMEC´2016,
Graz;
29.05.2016
- 03.06.2016; in: "Thermec 2016",
Trans Tech Publications Inc.,
Materials Science Forum, Volume 879
(2017),
ISBN: 978-3-0357-1129-5;
S. 1564
- 1569.
R. Reichsöllner, S. Orman, C. Hofstetter, M. Schwentenwein, G. Russmüller, J. Stampfl, R. Liska, S. Baudis:
"3D-printed, tough and biocompatible photopolymers for in vivo bone tissue regeneration";
Poster: Termis Eu 2019,
Rhodes, Greece;
27.05.2019
- 31.05.2019; in: "Termis EU 2019",
(2019),
S. 1625.
G. Requena, P. Cloetens, W. Altendorfer, C. Poletti, D. Tolnai, F. Warchomicka, H.P. Degischer:
"Sub-micrometer holotomography of multiphase metals";
Vortrag: ESRF Users' Meeting,
Grenoble - Frankreich;
09.02.2010
- 12.02.2010; in: "Science with X-ray Nano-beams",
-,
-
(2010),
S. 34.
G. Requena, H.P. Degischer, E. Marks, E. Boller:
"Evolution of the 3D Microstructure of a short fibre reinforced Al-Si alloy during creep";
Vortrag: 16th International Conference on Composite Materials,
Kyoto/ Japan;
08.07.2007
- 13.07.2007; in: "Proceedings of the 16th International Conference on Composite Materials",
(2007),
S. 1
- 10.
G. Requena, F. Lasagni, H.P. Degischer:
"Lokale Verformung in diskontinuierlich verstärktem Aluminium";
Vortrag: 14. DGM Symposium Verbundwerkstoffe und Werkstoffverbunde,
Wien;
02.07.2003
- 04.07.2003; in: "Verbundwerkstoffe",
H.P. Degischer (Hrg.);
Wiley-VCH Verlag,
Weinheim
(2003),
ISBN: 3-527-30762-1;
S. 171
- 176.
G. Requena, V. Mutafov, H.P. Degischer:
"Creep behaviour of unreinforced and SiC particle reinforced Al4Cu alloys";
Vortrag: Euromat 2005,
Prague (Czech Republic);
05.09.2005
- 08.09.2005; in: "http://www.dgm.de/past/2005/euromat2005/programme/index.htm",
(2005),
1 S.
G. Requena, A. Schnabl, H.P. Degischer:
"Isotherme und thermozyklische Kriechbeständigkeit von diskontinuierliche verstärktem Aluminium";
Vortrag: 14. DGM Symposium Verbundwerkstoffe und Werkstoffverbunde,
Wien;
02.07.2003
- 04.07.2003; in: "Verbundwerkstoffe",
H.P. Degischer (Hrg.);
Wiley-VCH Verlag,
Weinheim
(2003),
ISBN: 3-527-30762-1;
S. 139
- 144.
H. Riedl, M. Arndt, P. Polcik, P.H. Mayrhofer:
"Mechanical and tribological properties of arc evaporated Ti1-xAlxN/Mo1-x-ySixBy multilayer coatings";
Poster: 20th International Conference on Wear of Materials,
Toronto, Kanada;
12.04.2015
- 16.04.2015; in: "Book of Abstracts",
(2015).
H. Riedl, E. Aschauer, C.M. Koller, P. Polcik, M. Arndt, P.H. Mayrhofer:
"Ti-Al-N/Mo-Si-B multilayers: An architectural design for high temperature oxidation resistant hard coatings";
Vortrag: Plansee Seminar 2017,
Reutte;
29.05.2017
- 02.06.2017; in: "19th Plansee Seminar 2017",
Plansee Seminar 2017 Proceedings,
(2017),
Paper-Nr. RM 14,
14 S.
H. Riedl, R. Hollerweger, D. Holec, R. Rachbauer, P. Polcik, J. Paulitsch, P.H. Mayrhofer:
"Impact of Yttrium on mechanical properties, thermal stability and oxidation resistance of Ti-Al-N coatings";
Poster: Plansee Seminar 2013,
Reutte;
03.06.2013
- 07.06.2013; in: "Proceedings of the 18th Plansee Seminar 2013",
(2013),
S. 2014
- 2026.
H. Riedl, C.M. Koller, M. Bartosik, S. Kolozsvári, M. Arndt, A. Limbeck, P.H. Mayrhofer:
"Oxidation mechanism in Mo-Si-B/Ti-Al-N multilayer coatings";
Vortrag: 43rd International Conference on Metallurgical Coatnigs and Thin Films,
San Diego (USA);
25.04.2016
- 29.04.2016; in: "Book of Abstracts",
(2016),
S. 12.
H. Riedl, C.M. Koller, R. Rachbauer, S. Kolozsvári, F. Mendez Martin, P.H. Mayrhofer:
"Oxygen impurity related hardening mechanisms of Ti-Al-N thin films";
Poster: 14th International Conference on Plasma Surface Engineering,
Garmisch Partenkirchen;
15.09.2014
- 19.09.2014; in: "Book of Abstracts",
(2014),
S. 102.
H. Riedl, H. Lasfargues, S. Kolozsvári, A. Limbeck, D. Primetzhofer, P.H. Mayrhofer:
"Thermal stability and mechanical properties of Ta1-xHfxCy coatings for ultra-high temperature applications";
Vortrag: 16th Joint Vacuum Conference (JVC-16), the 14th European Vacuum Conference (EVC-14) and the 23th Croatian Slovenian International Scientific Meeting on Vacuum Science and Technique,
Portoroz;
06.06.2016
- 10.06.2016; in: "Book of abstracts",
(2016),
S. 117.
H. Riedl, V. Moraes, C. Fuger, H. Euchner, R Hahn, T. Wojcik, H. Bolvardi, P. Polcik, P.H. Mayrhofer:
"Synthesis of W1-xMxB2 based ternary diborides: Challenges and Possibilities";
Vortrag: 83rd IUVSTA Workshop,
Vadstena (eingeladen);
02.09.2018
- 06.09.2018; in: "Book of Abstract 83rd IUVSTA Workshop",
(2018),
S. 13.
H. Riedl, P. Polcik, M. Arndt, M. Sobiech, D. Holec, J. Paulitsch, P.H. Mayrhofer:
"Application oriented coating development for hot stamping processes: A combined first principles and experimental study";
Vortrag: EMRS Spring Meeting 2013,
Straßbourg;
27.05.2013
- 31.05.2013; in: "Book of Abstracts EMRS Spring Meeting 2013",
(2013).
H. Riedl, R. Rachbauer, S. Kolozsvári, P.H. Mayrhofer:
"Grain Size Induced Effects on the Decomposition Process of Ti-Al-N Thin Films";
Poster: 42nd International Conference on Metallurgical Coatings and Thin Films,
San Diego;
20.04.2015
- 24.04.2015; in: "Book of Abstracts",
(2015),
S. 97.
H. Riedl, A. Vieweg, R. Rachbauer, P. Polcik, P.H. Mayrhofer:
"High temperature oxidation behaviour and mechanical properties of PVD sputtered Mo-Si-B coatings";
Vortrag: 14th International Conference on Plasma Surface Engineering,
Garmisch-Partenkirchen;
15.09.2014
- 19.09.2014; in: "Book of Abstracts",
(2014),
S. 64.
H. Riedl, A Vlasova, R. Rachbauer, S. Kolozsvári, J. Paulitsch, P.H. Mayrhofer:
"Influence of oxygen impurities on structural, mechanical properties and age hardening of Ti-Al-N";
Vortrag: 41st International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego, CA;
28.04.2014
- 02.05.2014; in: "Book of Abstracts",
(2014),
S. 45.
H. Riedl, J. Zalesak, R. Rachbauer, P. Polcik, D. Holec, P.H. Mayrhofer:
"Ab initio studies on the Adsorption and Adhesive Transfer of Al and Fe to Nitride Coating Materials";
Poster: 3rd Vienna Scientific Cluster User Workshop,
Neusiedk am See;
24.02.2014
- 25.02.2014; in: "Book of Abstracts",
(2014).
H. Riedl, J. Zalesak, M. Sobiech, P. Polcik, D. Holec, P.H. Mayrhofer:
"Ab initio studies on the Adsorption and Adhesive Transfer of Al and Fe to Nitride Coating Materials";
Vortrag: 2nd Austrian-Indian-Symposium on Materials Science and Tribology,
Wiener Neustadt;
26.05.2014
- 28.05.2014; in: "Book of Abstracts",
(2014).
H. Riedl, J. Zalesak, M. Sobiech, P. Polcik, D. Holec, P.H. Mayrhofer:
"Ab initio studies on the Adsorption and Adhesive Transfer of Al and Fe to Nitride Coating Materials";
Poster: 41st International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego, CA;
28.04.2014
- 02.05.2014; in: "Book of Abstracts",
(2014),
S. 98.
H. Riedl, L. Zauner, Ph Ertelthaler, T. Wojcik, H. Bolvardi, S. Kolozsvári, P.H. Mayrhofer:
"Reactive HiPIMS deposition of Ti-Al-N: How to adjust the cubic to wurtzite transition";
Vortrag: 45th International Conference on Metallurgical Coatings and Thin Films (ICMCTF) 2018,
San Diego, CA;
23.04.2018
- 27.04.2018; in: "Abstract Book 45th ICMCTF 2018",
(2018),
S. 45.
M. Rodríguez-Hortalá, J. Hatzmann, H.P. Degischer:
"Structural characterisation of defects in CFRP laminates produced with different epoxy resin systems and their influence on the mechanical properties";
Vortrag: 15th European Conference on Composite Materials (ECCM 15),
Venedig;
24.06.2012
- 28.06.2012; in: "Proceedings of the 15th European Conference on Composite Materials",
M. Quaresimin et al. (Hrg.);
ECCM15,
Venezia
(2012),
ISBN: 978-88-88785-33-2;
Paper-Nr. 2000,
8 S.
M. Rodríguez-Hortalá, G. Requena, B. Seiser, H.P. Degischer, M. Di Michiel, T. Buslaps:
"3D-Characterization of continoues reinforced composites";
Vortrag: 17th International Conference on Composite Materials,
Edinburgh, Scotland, UK;
27.07.2009
- 31.07.2009; in: "17th International Conference on Composite Materials",
(2009),
S. 1
- 9.
M. Rodríguez-Hortalá, G. Requena, F. Sket, J. Molina-Aldareguia, E. Maire, L. Salvo, M. Scheel:
"In-situ synchrotron microtomography during tensile deformation of a multidirectional carbon fibre reinforced epoxy laminate";
Vortrag: 3D Microstructure Meeting 2011,
Saarbrücken (Deutschland);
02.11.2011
- 04.11.2011; in: "3D Microstructure Meeting 2011",
MatInfo Werkstoffinformationsgesellschaft mbH,
Frankfurt
(2011),
ISBN: 978-3-88355-388-7;
S. 14
- 15.
M. Rodríguez-Hortalá, D. Salaberger, P. Dobron, M. Holzmeier, H.P. Degischer:
"Charakterisierung der Schädigung in CFK-Verbundwerkstoffen mittels Computertomographie und in-situ Schallemission Messungen";
Vortrag: Tagung Werkstoffprüfung 2011,
Berlin (Deutschland);
01.12.2011
- 02.12.2011; in: "DVM Bericht 643 Tagung Werkstoffprüfung 2011",
W. Grellmann (Hrg.);
DVM,
(2011),
ISBN: 978-3-9814516-1-0;
S. 207
- 212.
M. Rodríguez-Hortalá, D. Salaberger, S. Hernández, M. Holzmeier, H.P. Degischer, J. Kastner:
"Characterisation of defects in carbon fibre reinforced polymers (CFRP)";
Vortrag: 18. DGM Symposium Verbundwerkstoffe und Werkstoffverbunde,
Chemnitz (Deutschland);
30.03.2011
- 01.04.2011; in: "Tagungsband zum 18. Symposium Verbundwerkstoffe und Werkstoffverbunde",
TU Chemnitz,
Schriftenreihe Werkstoffe und Werkstofftechnische Anwendungen, Band 41
(2011),
ISBN: 978-3-00-033801-4;
S. 208
- 215.
J. Roitner, V. Archodoulaki:
"Betrachtung des Degradationsverhaltens von Polyethylenen im mechanischen Recycling";
Vortrag: Polymertec 2021,
Merseburg;
09.06.2021
- 11.06.2021; in: "Internationale wissenschaftliche Tagung Polymertec 2021digital",
(2021),
ISBN: 978-3-00-069372-4;
S. 78.
A. Rom, S. Lüftl:
"Rissbedingtes Versagen von Exhaustleitungen aus Polypropylen";
Poster: 13. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Halle-Merseburg;
29.06.2011
- 01.07.2011; in: "Tagungsband 13. Problemseminar "Deformation und Bruchverhalten von Kunststoffen"",
(2011),
4 S.
M. Rosenauer, J. Stampfl, M. Vellekoop:
"A novel optofluidic evanescent waveguide sensor system for fluorescence spectroscopy fabricated by micro-stereolithography";
Vortrag: The 15th International Conference on Solid-State Sensors, Actuators & Microsystems - Transducers 2009,
Denver, Colorado, USA;
21.06.2009
- 25.06.2009; in: "Conference Proceedings Transducers 2009",
(2009),
ISBN: 978-1-4244-4193-8;
S. 718
- 721.
M. Roy, T. Koch, D. Steinmüller-Nethl, A. Pauschitz:
"Nanoindentation response of nanocrystalline diamond film";
Vortrag: Viennano'09 - 3rd Vienna International Conference Nano-Technology,
Vienna;
18.03.2009
- 20.03.2009; in: "Viennano'09 - 3rd Vienna International Conference Nano-Technology",
(2009),
ISBN: 978-3-901657-32-0;
S. 143
- 147.
J. Rupp, A. Bork, M. Kubicek, E. Povoden-Karadeniz, A. Carrillo:
"Solar-to-Fuel Conversion based on Redox-Active Perovskites";
Vortrag: Solid State Ionics 21st International Conference,
Padua;
18.06.2017
- 23.06.2017; in: "Solid State Ionics",
(2017),
S. 177.
L. Ruppitsch, G. Peer, K. Ehrmann, T. Koch, R. Liska:
"Difunctional Low Shrinkage Monomers performing Light-Induced Cyclopolymerization";
Vortrag: Polymer Meeting 14,
Graz;
30.08.2021
- 02.09.2021; in: "Polymer Meeting 14 Book of Abstracts",
Verlag der Technischen Universität Graz,
(2021),
ISBN: 978-3-85125-844-8;
S. 62.
G. Russmüller, R. Liska, D. Moser, J. Stampfl, C. Schopper, R. Ewers:
"Knochenregeneration mittels Photopolymeren - erste in-vivo-Ergebnisse";
Vortrag: 4. Wiener Biomaterialsymposium,
Wien;
15.11.2010
- 17.11.2010; in: "Tagungsband",
J. Stampfl (Hrg.);
(2010),
S. 16.
C. Sabitzer, S. Kolozsvári, M. Arndt, R. Rachbauer, J. Paulitsch, P.H. Mayrhofer:
"Reactive and non-reactive deposition of Al-Cr-N coatings using metallic, intermetallic, and ceramic target material";
Poster: International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2014,
San Diego, CA, USA;
27.04.2014
- 02.05.2014; in: "Abstract Book ICMCTF 2014",
(2014),
1 S.
C. Sabitzer, J. Paulitsch, P. Polcik, M. Arndt, R. Rachbauer, P.H. Mayrhofer:
"Architectural design of Al-rich cubic coating materials within the AlN-CrN system";
Vortrag: International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2013,
San Diego;
29.04.2013
- 03.05.2013; in: "Book of Abstracts ICMCTF 2013",
(2013).
C. Sabitzer, J. Paulitsch, P. Polcik, M. Arndt, R. Rachbauer, P.H. Mayrhofer:
"Reactive and non-reactive sputter deposition of metallic, intermetallic and ceramic target materials to prepare Al-Cr-N coatings";
Poster: International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2013,
San Diego;
29.04.2013
- 03.05.2013; in: "Book of Abstracts ICMCTF 2013",
(2013).
C. Sabitzer, J. Paulitsch, P. Polcik, M. Arndt, R. Rachbauer, P.H. Mayrhofer:
"Reactive and non-reactive sputter deposition of metallic, intermetallic and ceramic target materials to prepare Al-Cr-N coatings";
Poster: Plansee Seminar 2013,
Reutte;
03.06.2013
- 07.06.2013; in: "Proceedings of the 18th Plansee Seminar 2013",
(2013),
S. 1998
- 2005.
C. Sabitzer, C. Steinkellner, P. Polcik, M. Arndt, R. Rachbauer, J. Paulitsch, P.H. Mayrhofer:
"Investigation on the diffusion behaviour of Fe, Cr, and C in arc evaporated TiN- and CrN-based coatings and their influence on the thermal and mechanical properties";
Vortrag: International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2014,
San Diego, CA, USA;
27.04.2014
- 02.05.2014; in: "Abstract Book ICMCTF 2014",
(2014),
1 S.
C. Sabitzer, C. Steinkellner, P. Polcik, M. Arndt, R. Rachbauer, J. Paulitsch, P.H. Mayrhofer:
"Investigation on the diffusion behaviour of Fe, Cr, and C in arc evaporated TiN- and CrN-based coatings and their influence on the thermal and mechanical properties";
Vortrag: 15th Joint Vacuum Conference,
Vienna;
15.06.2014
- 20.06.2014; in: "Book of Abstracts, JVC",
(2014),
1 S.
C. Sabitzer, C. Steinkellner, P. Polcik, M. Arndt, R. Rachbauer, J. Paulitsch, P.H. Mayrhofer:
"Investigation on the diffusion behaviour of Fe, Cr, and C in arc evaporated TiN- and CrN-based coatings and their influence on the thermal and mechanical properties";
Poster: 14th International Conference on Plasma Surface Engineering,
Garmisch-Partenkirchen;
15.09.2014
- 19.09.2014; in: "Book of Abstracts",
(2014),
1 S.
M Sajjad, B. Feichtenschlager, S Pabisch, T. Koch, S. Seidler, H. Peterlik, G. Kickelbick:
"Effect of surface modification of silica nanoparticles on the thermomechanical properties of epoxy nanocomposites";
Poster: COST Action MP0701 Workshop,
Novi Sad;
23.09.2010
- 24.09.2010; in: "Book of Abstracts",
(2010),
S. 30.
M Sajjad, B. Feichtenschlager, S Pabisch, T. Koch, S. Seidler, H. Peterlik, G. Kickelbick:
"Epoxy nanocomposites with surface functionalized silica nanocomposites";
Poster: 10th Austrian Polymer Meeting and 2nd Austrian-Slowenian Polymer Meeting,
Leoben;
08.09.2010
- 10.09.2010; in: "ASPM2010 Austrian-Solenian Polymer Meeting, Leoben 2010: Book of Abstracts",
(2010),
S. 151.
M Sajjad, B. Feichtenschlager, S Pabisch, T. Koch, S. Seidler, H. Peterlik, G. Kickelbick:
"Properties of Epoxy/SiO2 - and Epoxy/ZrO2 - Nanocomposites";
Poster: 14th International Conference Polymeric Materials,
Halle (Saale);
15.09.2010
- 17.09.2010; in: "Proceedings Polymeric Materials 2010",
(2010),
ISBN: 978-3-86829-282-4;
Paper-Nr. P T41,
4 S.
M Sajjad, T. Koch, S. Seidler, B. Feichtenschlager, G. Kickelbick, H. Peterlik, S Pabisch:
"Effects of incorporation of silica and zirconia nanoparticles on the thermal and thermomechanical properties of polymer nanocomposites";
Poster: European Polymer Congress 2009,
Graz;
12.07.2009
- 17.07.2009; in: "EPF 09 - book of abstracts",
(2009),
S. 92.
M Sajjad, T. Koch, S. Seidler, B. Feichtenschlager, G. Kickelbick, H. Peterlik, S Pabisch:
"Effects of incorporation of silica and zirconia nanoparticles on the thermal and thermomechanical properties of polymer nanocomposites";
Poster: 12. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Merseburg;
24.06.2009
- 26.06.2009; in: "Tagungsband 12. Problemseminar",
(2009),
1 S.
M Sajjad, S. Seidler, B. Feichtenschlager, S Pabisch, T. Koch, H. Peterlik, G. Kickelbick:
"Thermo-mechanical properties of PMMA nanocomposites using functionalized silica nanoparticles";
Poster: 13. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Halle-Merseburg;
29.06.2011
- 01.07.2011; in: "13. Problemseminar Deformation und Bruchverhalten von Kunststoffen",
(2011),
4 S.
S. Sakhawat, A. Falahati, K. Spiradek-Hahn, H.P. Degischer:
"Hydrogen Embrittlement In Heat Affected Zone Of A Welded Sheet Of Precipitation Hardening Martensitic Stainless Steel";
Vortrag: International Doctoral Seminar 2009,
Smolenice Castle;
17.05.2009
- 19.05.2009; in: "Proceedings of International Doctoral Seminar 2009",
(2009),
S. 307
- 315.
D. Salaberger, T. Koch, Y Voronko, S. Seidler, J. Kastner:
"Comparison of particle size distributions derived from 2D and 3D analysis for particle filled polymers";
Vortrag: Polychar 20, World Forum on Advanced Materials,
Dubrovnik;
26.03.2012
- 30.03.2012; in: "Book of Abstracts",
(2012),
ISBN: 978-953-6470-57-0;
S. 95.
D. Salaberger, S Oberpeilsteiner, J. Kastner, T. Koch, M Palmstingl:
"Modellierung von Schädigungsmechanismen von kurzfaserverstärkten Polymeren mit Hilfe von Computertomografie";
Vortrag: Tagung Werkstoffprüfung 2013,
Neu-Ulm;
28.11.2013
- 29.11.2013; in: "Fortschritte in der Werkstoffprüfung für Forschung und Praxis",
Verlag Stahleisen GmbH,
(2013),
ISBN: 978-3-514-00806-9;
6 S.
V. Satzinger, V. Schmidt, L. Kuna, C. Palfinger, R. Inführ, R. Liska, J. R. Krenn:
"Rapid prototyping of micro-optics on organic light emitting diodes and organic photo cells by means of two-photon 3D lithography and nano-imprint lithography";
Poster: Photonics Europe 2008 (SPIE),
Strasbourg, Frankreich;
07.04.2008
- 10.04.2008; in: "Proc. of SPIE Vol. 6992",
(2008),
S. 699217-1
- 699217-10.
S. Schandl, K. Ehrmann, P. Knaack, J. Stampfl, R. Liska:
"Polycarbonates 3D-printed via Hot Lithography";
Poster: The 6th (virtual) European Symposium of Photopolymer Science,
Wien;
15.06.2021
- 17.06.2021; in: "vESPS 2021",
(2021),
ISBN: 978-3-9504809-3-1;
S. 168.
M. Schlögl, B. Mayer, J. Paulitsch, J. Keckes, C. Kirchlechner, P.H. Mayrhofer:
"Mechanical properties, fracture toughness, and thermal stability of CrN/AlN superlattice and multilayer thin films";
Vortrag: AVS 59th International Symposium,
Tampa;
28.10.2012
- 02.11.2012; in: "Book of Abstracts",
(2012).
M. Schlögl, J. Paulitsch, C. Kirchlechner, M.J. Cordill, J. Keckes, P.H. Mayrhofer:
"In-situ micro-fracture-test investigations on the influence of structure and phase transformation of CrN/AlN multilayer coatings";
Vortrag: International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2013,
San Diego;
29.04.2013
- 03.05.2013; in: "Book of Abstracts",
(2013).
C. Schnöll, C. Gorsche, T. Koch, N. Moszner, R. Liska:
"Debonding on demand: irreversible approach via thermally induced gas formation & network regulation";
Vortrag: RadTech Europe Conference & Exhibition 2017,
Prag;
17.10.2017
- 19.10.2017; in: "RadTech Europe Conference & Exhibition 2017",
(2017),
S. 51.
C. Schnöll, C. Gorsche, T. Koch, N. Moszner, R. Liska:
"Introducing Debonding on Demand within highly Cross-Linked Photopolymers";
Poster: 5th European Symposium of Photopolymer Science,
Mulhouse, France;
03.09.2018
- 06.09.2018; in: "5th European Symposium of Photopolymer Science",
5th European Symposium of Photopolymer Science,
(2018),
S. PO42.
C. Schnöll, C. Gorsche, T. Koch, N. Moszner, R. Liska:
"Introducing Highly Crosslinked Photopolymers with Debonding on Demand Properties";
Vortrag: Danube Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017",
Book of Abstracts.com,
(2017),
ISBN: 978-3-9504017-6-9;
S. OP-6.
C. Schoberleitner, V. Archodoulaki, T. Koch, S. Lüftl, G. Kuschnig, M. Werderitsch:
"Evaluation of polymer based sealing materials for socket rehabilitation";
Poster: Polymeric Materials 2012,
Halle (Saale);
12.09.2012
- 14.09.2012; in: "Polymeric Materials 2012",
(2012),
7 S.
C. Schoberleitner, V. Archodoulaki, T. Koch, S. Lüftl, L. Mateos, M. Vincze, G. Kuschnig, M. Werderitsch:
"Lead joint socket rehabilitation of grey cast iron pipes in drinking water supply systems";
Vortrag: Water Loss Europe 2012,
Ferrara;
23.05.2012
- 25.05.2012; in: "Water Loss Europe 2012",
(2012),
Paper-Nr. 68,
10 S.
C. Schoberleitner, V. Archodoulaki, T. Koch, S. Lüftl, M. Werderitsch, G. Kuschnig:
"Developing a Sealing Material: Effect of Epoxy Modification on the Specific Physical and Mechanical Properties";
Vortrag: 5th International Conference on Structural Analysis of Advanced Materials,
Kos, Griechenland;
23.09.2013
- 26.09.2013; in: "ICSAAM 2013, Conference Proceedings",
(2013),
12 S.
C. Schoberleitner, T. Koch, V. Archodoulaki:
"Modifizierte Epoxidharze für die Sanierung von Trinkwasserrohren";
Vortrag: Internationale wissenschaftliche Tagung Polymerwerkstoffe, Polymertec 2014,
Merseburg, Deutschland;
25.06.2014
- 27.06.2014; in: "Internationale wissenschaftliche Tagung Polymerwerkstoffe, Polymertec 2014",
(2014),
8 S.
C. Schoberleitner, M. Werderitsch, V. Archodoulaki, T. Koch, G. Kuschnig, S. Lüftl, L. Mateos, M. Vincze:
"Developing Water Loss Prevention - Entwicklung eines Dichtungswerkstoffes / Roboter für die automatisierte Muffensanierung von Graugussrohren im Trinkwasserbereich";
Vortrag: ÖGL Symposium Grabenlos 2012,
Kitzbühel;
16.10.2012
- 17.10.2012; in: "ÖGL Symposium Grabenlos 2012",
(2012),
S. 110
- 122.
M. Schöbel, H.P. Degischer, A. Brendel, B. Harrer, M. Di Michiel:
"3D characterization of thermal fatigue damage in monofilament reinforced copper for heat sink applications in fusion reactor systems";
Vortrag: 13. Internationale Metallographie-Tagung 2010,
Leoben;
29.09.2010
- 30.09.2010; in: "Fortschritte der Metallografie",
Sonderbände der Praktischen Metallographie,
42
(2010),
ISBN: 978-3-88355-382-5;
S. 183
- 188.
M. Schöbel, B. Harrer, H.P. Degischer:
"Multiskalare Tomografie von Diamant verstärkten Metallmatrix Verbundwerkstoffen für Kühlungszwecke";
Vortrag: Metallografie Tagung Jena 2008,
Jena;
17.09.2008
- 19.09.2008; in: "Fortschritt in der Metallografie",
Praktische Metallografie,
40
(2008),
S. 337
- 342.
U. Schubert, F.R. Kogler, Y. Gao, H. Peterlik, T. Koch, S. Seidler:
"Inorganic-organic hybrid polymers from metal oxide clusters as nanosized building blocks";
Vortrag: MC8: Advancing Materials by Chemical Design,
London;
02.07.2007
- 05.07.2007; in: "Advancing Materials by Chemical Design",
(2007),
S. 122.
M. Schuster, S. Chen, R. Liska, M. Rumpler, C. Turecek, F. Varga, J. Stampfl:
"Development of Biodegradable Photopolymers for Bone Tissue Engineering";
Poster: Radtech Europe 2005: Exhibition and Conference,
Barcelona;
18.10.2005
- 20.10.2005; in: "RadTech Europe 2005 Conference Proceedings Volume II",
(2005),
S. 365
- 372.
M. Schuster, S. Chen, R. Liska, C. Turecek, F. Varga, J. Stampfl:
"Photopolymerizable Biopolymers for Rapid Prototyping of Cellular Bone Replacement Materials";
Poster: Radtech Europe 2005: Exhibition and Conference,
Barcelona;
18.10.2005
- 20.10.2005; in: "RadTech Europe 2005 Conference Proceedings Volume II",
(2005),
S. 479
- 486.
M. Schuster, C. Turecek, C. Heller, F. Varga, J. Stampfl, R. Liska:
"3D-Structuring of Gelatine based Photopolymers";
Poster: RadTech Europe 2007 - Europe´s event for UV/EB curing, Vienna 13-15 Nov 2007,
Wien;
13.11.2007
- 15.11.2007; in: "RadTech Europe 2007 - Conference Proceedings",
(2007),
6 S.
M. Schuster, C. Turecek, B. Kaiser, F. Varga, J. Stampfl, R. Liska:
"Biophotopolymers for Rapid Prototyping of Cellular Bone Replacement Materials";
Poster: Junior Scientist Conference,
Wien;
19.04.2006
- 21.04.2006; in: "Junior Scientist Conference 2006 - Proceedings",
(2006),
ISBN: 3-902463-05-8;
S. 173
- 174.
M. Schuster, C. Turecek, A. Mateos, J. Stampfl, F. Varga, R. Liska:
"Evaluation of biocompatible Photopolymers for Rapid Prototyping of Bone Substitutes";
Poster: 2nd Stipomat Workshop,
Seggau, Austria;
23.10.2006
- 25.10.2006; in: "2nd Stipomat Workshop - Book of Abstracts",
(2006),
S. P17.
M. Schuster, C. Turecek, M. Rumpler, F. Varga, R. Liska, J. Stampfl:
"Development of Photopolymerizable Biopolymers for Rapid Prototyping of Cellular Bone Replacement Materials";
Poster: EuroMat 2005,
Prag, Tschechien;
05.09.2005
- 06.09.2005; in: "Euromat 2005 European Congress on Advanced Materials and Processes http.//www.Euromat2005.fems.org",
(2005),
1 S.
M. Schuster, C. Turecek, J. Stampfl, F. Varga, R. Liska:
"Biofunctional Photopolymers for Micro-Stereolithography";
Vortrag: 8th International Symposium on Laser Precision Microfabrication, LPM 2007,
Vienna, A;
24.04.2007
- 28.04.2007; in: "Proceedings of LPM2007",
(2007),
Paper-Nr. 07-72,
5 S.
M. Schuster, C. Turecek, J. Stampfl, F. Varga, R. Liska:
"Biophotopolymers for hard tissue replacement";
Poster: XXXIV ESAO Congress,
Krems, A;
05.09.2007
- 08.09.2007; in: "The International Journal of Artificial Organs, Abstracts of the XXXIV ESAO Congress",
D. Falkenhagen (Hrg.);
The International Journal of Artificial Organs,
30 (8)
(2007),
ISSN: 0391-3988;
S. 705.
M. Schuster, C. Turecek, F. Varga, H. Lichtenegger, J. Stampfl, R. Liska:
"Biodegradable photopolymers for bone tissue engeneering";
Vortrag: 8th Austrian Polymer Meeting,
Linz, Austria;
20.09.2006
- 22.09.2006; in: "8th Austrian Polymer Meeting - Abstracts",
(2006).
M. Schuster, C. Turecek, F. Varga, J. Stampfl, R. Liska:
"Acrylamide-based Biophotopolymers for Bone Tissue Engineering";
Poster: 7th Austrian Polymer Meeting,
Graz, Österreich;
04.07.2005
- 06.07.2005; in: "7th Austrian Polymer Meeting - Final Program",
(2005),
S. 69.
M. Schuster, C. Turecek, F. Varga, G. Weigel, J. Stampfl, R. Inführ, C. Heller, S. Baudis, R. Liska:
"Fundamental investigations towards a new bone replacement material containing gelatin photopolymers";
Poster: International Workshop on Biomacromolecules 2008,
Stockholm, S;
01.06.2008
- 04.06.2008; in: "International Workshop on Biomacromolecules 2008, Book of Abstracts",
(2008).
M. Schuster, C. Turecek, T. Verdianz, J. Stampfl, F. Varga, R. Liska:
"Development of Biodegradable Photopolymers";
Poster: 2nd Stipomat Workshop,
Seggau, Austria;
23.10.2006
- 25.10.2006; in: "2nd Stipomat Workshop - Book of Abstracts",
(2006),
S. P16.
S. Schwarz, R. Radis, E. Kozeschnik, G. Rumplmair:
"TEM investigations of the precipitation kinetics of Mn(Cu)S and AlN in microalloyed steel";
Poster: Microscopy Conference Graz, Dreiländertagung,
Graz;
30.08.2009
- 04.09.2009; in: "MC Graz 2009",
Facultas Verlag,
(2009),
ISBN: 978-3-85125-062-6;
S. 253
- 254.
M. Schwentenwein, S. Baudis, F. Nehl, S. Ligon, A. Nigisch, H. Bergmeister, A. Blümel, W. Grogger, D. Bernhard, J. Stampfl, R. Liska:
"Elastomeric Photopolymers by Thiol-ene Polymerization for Vascular Tissue Engineering";
Poster: 4th Joint ESAO IFAO Congress,
Porto, P;
09.10.2011
- 12.10.2011; in: "The International Journal of Artificial Organs",
Wichtig Editore,
Milano
(2011),
ISSN: 0391-3988;
S. 679.
M. Schwentenwein, C. Heller, J. Stampfl, R. Liska:
"Rapid Prototyping of Biocompatible and Biodegradable monomers";
Vortrag: RadTech Europe 2009,
Nizza, FR;
14.10.2009
- 15.10.2009; in: "Radtech Europe 2009, Proceedings",
(2009),
8 S.
M. Schwentenwein, C. Heller, J. Stampfl, F. Varga, R. Liska:
"Biocompatible and Biodegradable monomers based on Oligoethylene glycols with different polymerizable groups";
Vortrag: RadTech Europe 2009,
Nizza, FR;
14.10.2009
- 15.10.2009; in: "Radtech Europe 2009, Proceedings",
(2009),
6 S.
M. Schwentenwein, C. Heller, J. Stampfl, F. Varga, R. Liska:
"Biocompatible and Biodegradable monomers with different polymerizable groups";
Poster: EPF 2009, European Polymer Congress,
Graz, A;
12.07.2009
- 17.07.2009; in: "EPF'09, Book of Abstracts",
(2009),
S. 208.
M. Schwentenwein, C. Heller, J. Stampfl, F. Varga, G. Russmüller, R. Liska:
"New Types of Photopolymers for Regenerative Medicine";
Poster: ESAO - ASAIO Winter School 2011,
Semmering, A;
26.01.2010
- 29.01.2010; in: "ESAO-ASAIO Winter School",
(2011),
S. 66.
M. Schwentenwein, C. Heller, F. Varga, G. Russmüller, J. Stampfl, R. Liska:
"3D fabrication of poly(vinyl alcohol)-based photopolymers for biomedical applications";
Poster: European Symposium of Photopolymer Science,
Mulhouse, France;
28.11.2010
- 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book",
(2010).
M. Schwentenwein, C. Heller, F. Varga, G. Russmüller, J. Stampfl, R. Liska:
"3d-Fabrication Of Biodegradable Poly(vinyl Alcohol)-Based";
Vortrag: 19th Annual Meeting of the BioEnvironmental Polymer Society (BEPS),
Wien;
28.09.2011
- 30.09.2011; in: "19th Annual Meeting of the BioEnvironmental Polymer Society",
(2011),
ISBN: 978-3-9502992-3-6;
S. OP-10.
M. Schwentenwein, F. Nehl, H. Wilhelm, H. Bergmeister, D. Bernhard, J. Stampfl, R. Liska:
"Photoelastomers based on thiol-ene polymerization";
Vortrag: RadTech Europe 2011,
Basel, CH;
18.10.2011
- 20.10.2011; in: "RadTech Europe 2011 - Abstract Book",
(2011),
S. 90.
M. Schwentenwein, J. Stampfl, C. Heller, F. Varga, G. Russmüller, R. Liska:
"3D-Structuring of Poly(vinyl alcohol)-based Photopolymers";
Vortrag: Termis Eu 2011,
Granada, E;
07.06.2011
- 10.06.2011; in: "TERMIS EU 2011 Annual Meeting",
(2011).
S. Seichter, V. Archodoulaki, T. Koch:
"Measurement set-up to investigate the crack nucleation and crack growth approach for the estimation of the fatigue life of rubber";
Vortrag: DVSPM 2015,
Gmunden;
11.05.2015
- 13.05.2015; in: "Danube Vltava Sava Polymer Meeting - DVSPM 2015, Proceedings of a Conference on Polymer Science",
M. List, C. Paulik, Z. Major, I. Teasdale, O. Brüggemann (Hrg.);
Trauner Verlag,
Linz
(2015),
ISBN: 978-3-99033-491-1;
S. 81.
S. Seichter, V. Archodoulaki, T. Koch, W. Fidi, A. Holzner:
"The experimentally survey of the crack growth approach for the fatigue life estimation of application-relevant rubbers";
Vortrag: Polymer Processing Society Conference 2015,
Graz;
21.09.2015
- 25.09.2015; in: "Regional Conference Polymer Processing Society Graz 2015",
C. Holzer, S. Laske, M. Payer (Hrg.);
Graz
(2015),
S. 208.
S. Seichter, V. Archodoulaki, T. Koch, W. Fidi, A. Holzner, S. Robin:
"Einfluss der Temperatur auf die Ermüdung von Elastomeren";
Vortrag: Tagung Werkstoffprüfung 2015,
Bad Neuenahr, Deutschland;
02.12.2015
- 04.12.2015; in: "Fortschritte in der Werkstoffprüfung für Forschung und Praxis",
M. Borsutzki, G. Moninger (Hrg.);
Verlag Stahleisen,
Düsseldorf
(2015),
ISBN: 978-3-514-00816-8;
S. 61
- 66.
S. Seichter, V. Archodoulaki, T. Koch, W. Fidi, A. Holzner, S. Robin:
"Experimental survey of approaches to estimate the uniaxial fatigue life of industrial rubbers";
Vortrag: 9th European Conference on Constitutive Models for Rubbers,
Prag, Tschechien;
01.09.2015
- 04.09.2015; in: "Constitutive Models for Rubber IX",
B. Marvalová, I. Petríková (Hrg.);
CRC Press,
London
(2015),
ISBN: 978-1-138-02873-9;
S. 433
- 438.
S. Seichter, V. Archodoulaki, T. Koch, A. Holzner, A. Wondracek:
"A Study On The Fatigue Behaviour Of Industrial Rubbers And Rubber Composites";
Vortrag: 12th Fall Rubber Colloquium KHK,
Hannover, Deutschland;
22.11.2016
- 24.11.2016; in: "12. Kautschuk-Herbst Kolloquium - 12th Fall Rubber Colloquium",
(2016),
S. 65.
S. Seichter, V. Archodoulaki, T. Koch, A. Holzner, A. Wondracek:
"Fatigue Behaviour of Industrial Rubber Blends and Rubber-Textile Composites";
Poster: EUROMAT 2017,
THESSALONIKI;
17.09.2017
- 22.09.2017; in: "EUROMAT 2017",
EUROMAT 2017,
(2017),
Paper-Nr. B10-P-TUE-P1-5,
1 S.
S. Seichter, V. Archodoulaki, T. Koch, A. Holzner, A. Wondracek:
"Fatigue Behaviour of Industrial Rubber Blends and Rubber-Textile Composites";
Poster: DVSPM 2017,
Wien;
17.09.2017
- 22.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017 DVSPM",
DVSPM 2017,
Austria
(2017),
ISBN: 978-3-9504017-6-9;
S. PO-32.
S. Seichter, V. Archodoulaki, T. Koch, A. Holzner, A. Wondracek:
"Investigation of different influences on the fatigue behaviour of industrial rubber blends";
Vortrag: Polymertec16,
Merseburg;
15.06.2016
- 17.06.2016; in: "Internationale wissenschaftliche Tagung Polymerwerkstoff Polymertec16",
B. Langer, P. Michel (Hrg.);
(2016),
S. 20.
W. Seidl, M. Bartosik, H. Bolvardi, S. Kolozsvári, P.H. Mayrhofer:
"Stress-Design in TiAlTaN/AlCrN Multilayer Coatings";
Vortrag: Stress 2016,
Chicago;
02.10.2016
- 05.10.2016; in: "Stress Evolution in Thin Films and Coatings: From Fundamental Understanding to Control",
(2016),
S. 20.
W. Seidl, S.A. Glatz, S. Kolozsvári, M. Arndt, P.H. Mayrhofer:
"Stress-Design in Multilayer Coatings - Architectural concepts and resulting properties";
Vortrag: AVS 62nd International Symposium & Exhibition,
San Jose, USA;
18.10.2015
- 23.10.2015; in: "Technical and Exhibitor Program",
(2015),
S. 5.
W. Seidl, S.A. Glatz, R. Rachbauer, M. Arndt, S. Kolozsvári, P.H. Mayrhofer:
"Structure, Mechanical and Thermal Properties of TiAlTaN/AlCrN-Multilayer Coatings";
Poster: Vienna Young Scientists Symposium (VSS) 2015,
Wien;
25.06.2015
- 26.06.2015; in: "Book of Abstract",
Book-of-Abstracts.com,
(2015),
ISBN: 978-3-9504017-0-7;
S. 160
- 161.
K. Seidler, P. Gauss, M. Kury, G. Harakaly, M. Griesser, T. Koch, J. Stampfl, C. Gorsche, N. Moszner, R. Liska:
"Tough and low shrinkage photopolymers";
Vortrag: European Coatings Show and Conference 2017,
Nürnberg (eingeladen);
02.04.2017
- 06.04.2017; in: "European Coatings Journal 04-2017",
Vincentz Network GmbH & Co. KG, Hannover (Deutschland),
04/2017
(2017),
ISSN: 0930-3847;
S. 96.
K. Seidler, C. Gorsche, T. Koch, N. Moszner, R. Liska:
"The influence of addition-fragmentation-chain-transfer on mechanical properties of methacrylate networks";
Vortrag: DVSPM 2015,
Gmunden;
11.05.2015
- 13.05.2015; in: "Proceedings of a Conference on Polymer Science",
(2015),
ISBN: 978-3-99033-491-1;
S. 65.
K. Seidler, C. Gorsche, M. Kury, H. Reghunathan, T. Koch, N. Moszner, R. Liska:
"Toughening of Methacrylate Networks through Addition-Fragmentation Chain Transfer";
Vortrag: RadTech Europe 2015 Conference,
Prague;
13.10.2015
- 15.10.2015; in: "Abstract Book",
(2015),
S. 17.
K. Seidler, S. Ligon, S. Baudis, T. Koch, J. Stampfl, R. Liska:
"Biodegradable Thermoplastic Polyurethanes: Synthesis and Characterization of Improved TPUs";
Poster: 4th Joint ESAO IFAO Congress,
Porto, P;
09.10.2011
- 12.10.2011; in: "The International Journal of Artificial Organs",
Wichtig Editore,
Milano
(2011),
ISSN: 0391-3988;
S. 692.
S. Seidler:
"Bionik - Was können wir aus der Bionik lernen?";
Vortrag: 41. Int. Chemiefasertagung,
Dornbirn;
18.09.2002
- 20.09.2002; in: "41. Internationale Chemiefasertagung",
CD
(2002).
S. Seidler:
"Macro - Micro - Nano: Scaling Problems in Polymer Characteriszation and Testing";
Vortrag: POLYCHAR - World Forum on Advanced Materials,
Nara , Japan (eingeladen);
17.04.2006
- 22.04.2006; in: "POLYCHAR - World Forum on Advanced Materials",
(2006),
S. 22.
S. Seidler:
"Materialien von gestern - Werkstoffe von heute: Trends in der Kunststoffentwicklung";
Hauptvortrag: 3. Werkstoffkongress "Neu gegen Alt",
Leoben, Österreich (eingeladen);
03.11.2005
- 04.11.2005; in: "Neu gegen Alt: die richtige Anwendung traditioneller und neuer Werkstoffe",
(2005).
S. Seidler:
"Morphology - Mechanicl Property Correlations in Polymer Blends in Terms of Macromechanical and Micromechanical Testing Methods";
Hauptvortrag: International Conference on Advances in Polymer Blends, Composites, IPNs and Gels: Macro to Nano Scales (ICBC-2005),
Mahatma Gandhi University, Kottayam (India) (eingeladen);
21.03.2005
- 23.03.2005; in: "ICBC -2005",
(2005).
S. Seidler:
"Morphology-Property-Correlations by Means of Microhardness Measurements";
Vortrag: 6th Austrian Polymer Meeting,
Wien (Austria);
15.09.2003
- 17.09.2003; in: "6th Austrian Polymer Meeting, Wien (Austria)",
XXIst International H.F. Mark - Symposium,
(2003),
S. 33.
S. Seidler:
"Thermoanalytische Messmethoden - methodische Aussagefähigkeit und industrielle Aspekte";
Hauptvortrag: Werkstoffprüfung 2005,
Berlin (Germany) (eingeladen);
01.12.2005
- 02.12.2005; in: "Tagungsband Werkstoffprüfung 2005: Herausforderungen neuer Werkstoffe an die Forschung und Werkstoffprüfung (DVM Bericht 641)",
W. Grellmann (Hrg.);
DVM,
(2005),
ISSN: 1861-8154;
S. 247
- 256.
S. Seidler, T. Koch, R. Kogler, U. Schubert:
"Effectiveness of Zr6 clusters as cross-link agents for polystyrene";
Vortrag: Symposium on Functional Polymer Based Materials,
Jena/Deutschland;
03.04.2007
- 04.04.2007; in: "Proceedings - Symposium on Functional Polymer Based Materials - April 2007",
(2007),
S. 13
- 15.
S. Seidler, T. Koch, I. Kotter, W. Grellmann:
"Rissspitzendeformationsprozesse in Kunststoffen am Beispiel von Polypropylen";
Vortrag: 34. Tagung des DVM-Arbeitskreises Bruchvorgänge,
Freiberg;
19.02.2002
- 20.02.2002; in: "Fortschritte der Bruch- und Schädigungsmechnik",
DVM-Bericht 234
(2002),
S. 197
- 206.
S. Seidler, T. Koch, I. Kotter, W. Grellmann:
"Rissspitzendeformationsprozesse in Kunststoffen am Beispiel von Polypropylen";
Vortrag: Polymerwerkstoffe 2002,
Halle (Saale);
25.09.2002
- 27.09.2002; in: "Polymerwekstoffe 2002",
(2002),
S. 346
- 349.
M. Seier, V. Archodoulaki:
"Challenges in mechanical recycling of single-use plastics and possibilities of new concepts";
Poster: EUROMAT 2021,
Online;
13.09.2021
- 17.09.2021; in: "European Congress And Exhibition On Advanced Materials And Processes - Euromat 2021",
(2021).
M. Seier, V. Archodoulaki:
"Herausforderungen im mechanischen Recycling von Einweg-Kunststoffen und Möglichkeiten neuer Konzepte";
Vortrag: Polymertec 2021,
Merseburg;
09.06.2021
- 11.06.2021; in: "Internationale wissenschaftliche Tagung Polymertec 2021digital",
(2021),
ISBN: 978-3-00-069372-4;
S. 44.
F. Seifried, H. Riedl, S. Baumgärtner, H. Leiste, R. Schwaiger, S. Ulrich, H. Seifert, P.H. Mayrhofer, M. Stüber:
"Magnetron Sputtering of Refractory Metal Thin Films on NiTi Shape Memory Alloy Sheets";
Vortrag: 45th International Conference on Metallurgical Coatings and Thin Films 2018,
San Diego, CA;
23.04.2018
- 27.04.2018; in: "Book of Abstracts 45th ICMCTF 2018",
(2018),
S. 12.
D. Shakhvorostov, K. Pöhlmann, M. Scherge, H. Pinto, A. Pyzalla, S. Enders:
"Mechanical Properties of Tribologically Modified Nanolayers";
Vortrag: 14th International Colloquium Tribology,
Ostfildern;
13.01.2004
- 15.01.2004; in: "Tribology and Lubrication Engineering, Volume 1",
W.J. Bartz (Hrg.);
Technische Akademie Esslingen,
(2004),
ISBN: 3-924813-54-x;
S. 59
- 62.
Y.V. Shan, J. Svoboda, F.D. Fischer, E. Kozeschnik:
"Determination of Substitutional-Interstitial Interaction from Chemical Potentials of Interstitials in the Steel Matrix";
Poster: THERMEC 2013,
Las Vegas, USA;
02.12.2013
- 06.12.2013; in: "Advanced Materials Research",
Advanced Materials Research,
THERMEC 2013 Supplement / Volume 922
(2013),
ISSN: 1662-8985;
S. 645
- 650.
Y.V. Shan, J. Svoboda, F.D. Fischer, E. Kozeschnik:
"Thermo-kinetic modeling of Mg-Si couple formation as a precursor to precipitation in Al-Mg-Si";
Vortrag: PTM 2015 Solid-Solid Phase Transformation in Inorganic Materials,
Whistler;
28.06.2015
- 03.07.2015; in: "Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015",
(2015),
ISBN: 978-0-692-43736-0;
S. 883
- 884.
P. Sherstnev, P. Lang, E. Kozeschnik:
"Treatment of simultaneous deformation and solid-state precipitation in thermo-kinetic calculations";
Vortrag: 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012),
University of Vienna;
10.09.2012
- 14.09.2012; in: "CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), September 10-14, 2012, Vienna, Austria",
(2012),
8 S.
J. Shim, E. Kozeschnik, W. Jung, Y. Cho:
"Prediction of long-term precipitate evolution in austenitic heat-resistant steels";
Vortrag: Liege Conference: Materials for Advanced Power Engineering 2010,
Liege, Belgium;
27.09.2010
- 29.09.2010; in: "Materials for Advanced Power Engineering 2010",
(2010),
S. 198
- 207.
M. Siklos, Z. Li, N.U Pucher, R. Liska, J. Stampfl:
"New Initiators for Two-Photon Photopolymerisation";
Poster: Junior Scientist Conference 2010,
Vienna;
07.04.2010
- 09.04.2010; in: "Proceedings",
(2010),
ISBN: 978-3-200-01797-9;
S. 211
- 212.
M. Siklos, N.U Pucher, Z. Li, K. Cicha, A. Rosspeintner, A. Ajami, G. Gescheidt, W. Husinsky, J. Stampfl, R. Liska:
"Structure optimization of novel initiators for two-photon polymerization (2PP) process";
Vortrag: 11th International Symposium on Laser Precision Microfabrication, LPM 2010,
Stuttgart, D;
07.06.2010
- 10.06.2010; in: "Book of Abstracts",
(2010).
E. Silva, L. Batista, B. Callegari, I. Feierabend, R. Buzolin, R. Coelho, F. Warchomicka, G. Requena, H. Pinto:
"Casting in the Semi-Solid State of ZK60 Magnesium Alloy Modified with Rare Earth Addition";
Vortrag: THERMEC 2013,
Las Vegas;
02.12.2013
- 06.12.2013; in: "THERMEC 2013",
(2013).
E. Silva, L. Batista, B. Callegari, V. Ferrinho, R. Buzolin, R. Coelho, F. Warchomicka, G. Requena, A. Ramirez, H. Pinto:
"Microstructure and Residual Stress Formation during Friction-Stir Welding of Semi-Solid Cast ZK60-RE Magnesium Alloy";
Vortrag: THERMEC 2013,
Las Vegas;
02.12.2013
- 06.12.2013; in: "THERMEC 2013",
(2013).
G. Siroky, E. Kraker, J. Magnien, E. Kozeschnik, D. Kieslinger, W. Ecker:
"Numerical study on local effects of composition and geometry in self-healing solders";
Vortrag: 20th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems,
Hannover;
24.03.2019
- 27.03.2019; in: "20th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems",
(2019),
ISBN: 978-1-5386-8040-7;
S. 21
- 37.
G. Siroky, D. Melinc, J. Magnien, E. Kozeschnik, D. Kieslinger, E. Kraker, W. Ecker:
"Healing solders: A numerical investigation of damage-healing experiments";
Hauptvortrag: 21st International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE),
Virtuell;
05.07.2020
- 08.07.2020; in: "2020 21st International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE)",
(2020),
ISBN: 978-1-7281-6049-8;
S. 1
- 7.
J. Six, A. Göksenli, S. Ilie, E. Kozeschnik:
"Investigation of the Hot Ductility Trough of Nb-Containing Low Alloy Steel";
Vortrag: Materials Science & Technology 2010,
Houston, Texas, USA;
17.10.2010
- 21.10.2010; in: "Proceedings MS&T 2010",
(2010),
10 S.
J. Six, S. Schwarz, S. Ilie, E. Kozeschnik:
"Analyse korngrenzennaher NbC-Ausscheidungen mittels Replica-Methode und Korrelation zum 2. Duktilitätsminimum";
Vortrag: 13. Internationale Metallographie-Tagung 2010,
Leoben;
29.09.2010
- 01.10.2010; in: "Fortschritte in der Metallographie",
G Petzow (Hrg.);
Sonderbände der Praktischen Metallographie,
42
(2010),
ISBN: 978-3-88355-382-5;
S. 57
- 62.
J. Six, S. Schwarz, T. Wojcik, S. Ilie, E. Kozeschnik:
"Simulation of the precipitation kinetics in low-carbon Nb-micro-alloyed steels";
Vortrag: 4th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking,
Düsseldorf;
27.06.2011
- 01.07.2011; in: "Proceedings",
(2011),
8 S.
B. Skandera, A. Samoilov, H.P. Degischer, P. Stiaszny:
"Development of V-based microalloyed high strength hot rolled strip";
Vortrag: Metal 2004 - 13th International Metallurgical and Meterials Conference,
Hradec nad Moravici (Czech Republic);
2004; in: "Metal 2004. Proceedings of the 13th International Metallurgical and Materials Conference",
TANGER, spol. sr.o.,
(2004),
ISBN: 80-85988-95-x;
Paper-Nr. 150,
8 S.
F. Sket, J. Garcia, D. Eyidi, A. Pyzalla:
"The microstructure of Co and Ni binder phases in graded hard metals and its inuence on corrosion resistance";
Poster: 55. Jahrestagung der österreichischen physikalischen Gesellschaft 2005,
Vienna University of Technology, Austria;
27.09.2005
- 29.09.2005; in: "55. Jahrestagung der österreichischen physikalischen Gesellschaft",
ÖPG,
(2005),
S. P-FKP87.
W. Smetana, G. Radosavljevic, M. Unger, L. Zivanov, T. Koch:
"A Capacitive Temperature Sensor Concept Realized in LTCCTechnology";
Poster: Smart Systems Integration 2009 (SSI),
Brussels, Belgium;
10.03.2009
- 11.03.2009; in: "Smart Systems Integration 2009 Proceedings",
(2009),
ISBN: 978-3-89838-616-6;
S. 1
- 4.
E. Sobotka, J. Kreyca, E. Povoden-Karadeniz:
"Recrystallization simulation and double-hit compression tests of microalloyed steel";
Vortrag: Online Conference STEELSIM 2021,
Vienna;
05.10.2021
- 07.10.2021; in: "The 9th International Conference on Modeling and Simulation of Metallurgical Processes in Steelmaking",
(2021),
ISBN: 978-3-200-07994-6;
S. 522
- 529.
B. Sonderegger, M Hacksteiner, F Mendez-Martin, I. Holzer, E. Kozeschnik:
"Calculation of phase boundary energies and application in multi-component steels";
Vortrag: Liege Conference: Materials for Advanced Power Engineering 2010,
Liege, Belgium;
27.09.2010
- 29.09.2010; in: "Materials for Advanced Power Engineering 2010",
(2010),
S. 320
- 329.
B. Sonderegger, E. Kozeschnik, C. Sommitsch:
"Modeling particle distances of prolate- and oblate shaped precipitates";
Hauptvortrag: THERMEC 2011, International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS Processing, Fabrication, Properties, Applications,
Quebec - Canada;
01.08.2011
- 05.08.2011; in: "THERMEC 2011",
Materials Science Forum / Trans Tech Publications,
706-709
(2012),
ISSN: 1662-9752;
S. 1521
- 1526.
L. Spoljaric-Lukacic, P. Esfandiari, T. Koch, A. Limbeck, W.S.M. Werner, S. Knaus:
"Diketone and Dioxime Functionalized Polypropylene: Surface Photograting and Electroless Metalization";
Vortrag: 9th Austrian Polymer Meeting,
Graz, A;
26.03.2008
- 28.03.2008; in: "9th Austrian Polymer Meeting, Book of Abstracts",
(2008),
S. 6.
F. Stadlbauer, T. Koch, V. Archodoulaki:
"Approach to Measure the Influence of Experimental Parameters on Fatigue Crack Growth and Heat Build-Up in Rubber";
Vortrag: 5th International Conference on Structural Analysis of Advanced Materials,
Kos, Griechenland;
23.09.2013
- 26.09.2013; in: "ICSAAM 2013, Conference Proceedings",
(2013),
15 S.
F. Stadlbauer, T. Koch, V. Archodoulaki:
"Optimierung der Mess- und Auswertemethodik zur Charakterisierung des Ermüdungsverhaltens von Elastomeren";
Vortrag: Tagung Werkstoffprüfung 2013,
Neu-Ulm;
28.11.2013
- 29.11.2013; in: "Fortschritte in der Werkstoffprüfung für Forschung und Praxis",
H. Christ (Hrg.);
Verlag Stahleisen GmbH,
(2013),
ISBN: 978-3-514-00806-9;
S. 151
- 156.
F. Stadlbauer, T. Koch, F. Planitzer, W. Fidi, V. Archodoulaki:
"Advanced evaluation of the influence of material parameters and sample geometries on the crack growth in rubber";
Vortrag: Polymeric Materials 2012,
Halle (Saale);
12.09.2012
- 14.09.2012; in: "Polymeric Materials 2012",
(2012),
6 S.
F. Stadlbauer, T. Koch, F. Planitzer, W. Fidi, V. Archodoulaki:
"Advanced setup for the evaluation of crack growth in rubber: influence of sample geometry and filler content tested in tension-compression mode";
Vortrag: 10th Fall Rubber Colloquium,
Hannover;
07.11.2012
- 09.11.2012; in: "10th Fall Rubber Colloquium",
(2012),
9 S.
K. Stadlmann, K. Cicha, J. Kumpfmüller, R. Liska, J. Stampfl, U. Hinze, B. Chichkov:
"Development of a two Photon Polymerization setup for Structuring optical Waveguides with High Throughput";
Vortrag: Materials science and engineering MSE 2010,
Darmstadt;
24.08.2010
- 26.08.2010; in: "Tagungsband Material science and engineering 2010",
(2010),
S. 32.
K. Stadlmann, K. Cicha, J. Kumpfmüller, V. Schmidt, V. Satzinger, R. Liska, J. Stampfl:
"Fabrication of Optical Interconnects with Two Photon Polymerization";
Vortrag: 11th International Symposium on Laser Precision Microfabrication, LPM 2010,
Stuttgart, D;
07.06.2010
- 10.06.2010; in: "Proceedings of LPM2010",
K. Sugioka (Hrg.);
(2010),
S. #10-15.
J. Stampfl:
"3D-printing of ceramics: Translation to industrial processes";
Hauptvortrag: AMPT 2015,
Madrid;
14.12.2015
- 17.12.2015; in: "Advances in Material & Processing Technologies",
J. Torralba (Hrg.);
(2015),
S. 202.
J. Stampfl:
"Fracture mechanical aspects related to the lithography based additive manufacturing of metals, ceramics and polymers";
Vortrag: 5th Metal Additive Manufacturing Conference 2020,
Leoben;
30.09.2020
- 02.10.2020; in: "Metal Additive Manufacturing Conference",
(2020).
J. Stampfl:
"Fracture mechanical design of new photopolymers for Additive Manufacturing";
Hauptvortrag: 14th Polymer Meeting PM14,
Graz (eingeladen);
30.08.2021
- 02.09.2021; in: "Polymer Meeting 14",
Verlag der TU Graz,
(2021),
ISBN: 978-3-85125-844-8;
S. 54.
J. Stampfl:
"Functional photopolymers for two-photon-lithography";
Vortrag: Femtomat 2013,
Mauterndorf (eingeladen);
18.03.2013
- 20.03.2013; in: "5th European Conference on Applications of Femtosecond Lasers in Materials Science",
W. Kautek (Hrg.);
(2013),
S. 20.
J. Stampfl:
"Lithography-based Additive Manufacturing of high-performance ceramics";
Vortrag: Metal Additive Manufacturing Conference 2014,
Wien;
20.11.2014
- 21.11.2014; in: "Meet the future of industrial manufacturing now",
(2014),
S. 22.
J. Stampfl:
"Schlagzähe Photopolymere für die lithographiebasierte Additive Fertigung";
Vortrag: Polymertec18,
Merseburg;
13.06.2018
- 15.06.2018; in: "Internationale wissenschaftliche Tagung Polymerwerkstoffe",
B. Langer, P. Michel, R. Lach (Hrg.);
Selbstverlag Hochschule Merseburg,
(2018),
ISBN: 978-3-942703-91-8;
S. 75
- 76.
J. Stampfl, R. Cano Vives, S. Seidler, R. Liska, F. Schwager, H. Gruber, A. Wöß, P. Fratzl:
"Rapid Prototyping - A Route for the Fabrication of Biomimetic Cellular Materials";
Vortrag: 1st International Conference on Advanced Reserch in Virtual and Rapid Prototyping, Leira (Portugal),
Leira (Portugal);
01.10.2003
- 04.10.2003; in: "1st International Conference on Advanced Research in Virtual and Rapid Prototyping, Leira (Portugal)",
Leira (Portugal)
(2003),
ISBN: 972-99023-0-5;
S. 659
- 666.
J. Stampfl, P. Dorfinger, R. Gmeiner, R. Liska:
"Materials development for lithography-based 3D-printing";
Vortrag: Makromolekulares Kolloquium,
Freiburg;
24.02.2016
- 26.02.2016; in: "Macromolecular Chemistry and Physics",
Wiley-VCH,
2
(2016),
S. 90.
J. Stampfl, S. Gruber, R. Felzmann, S. Springer, R. Liska:
"Lithographiebasierte Fertigung keramischer Bauteile";
Vortrag: RapidTech 2011,
Erfurt;
24.05.2011
- 25.05.2011; in: "Fachmesse und Anwendertagung für Rapid-Technologie",
A. Gebhardt (Hrg.);
(2011),
Paper-Nr. Anwendertagung 5/2,
4 S.
J. Stampfl, C. Heller, M. Schuster, S. Baudis, J. Homa, R. Liska:
"Biofunktionelle Photopolymere für die generative Fertigung";
Vortrag: Rapidtech,
Erfurt/Deutschland;
27.05.2008
- 28.05.2008; in: "Tagungsband",
(2008),
Paper-Nr. AT-Session5-V2,
4 S.
J. Stampfl, C. Heller, M. Schwentenwein, S. Baudis, F. Varga, R. Liska:
"Entwicklung nicht-toxischer Biophotopolymere für die generative Fertigung";
Vortrag: 12. Problemseminar Deformation und Bruch,
Merseburg;
24.06.2009
- 26.06.2009; in: "Tagungsband Deformation und Bruch",
W. Grellmann (Hrg.);
(2009),
4 S.
J. Stampfl, C. Heller, M. Schwentenwein, G. Russmüller, F. Varga, R. Liska:
"Biophotopolymers for stereolithography and two-photon lithography";
Hauptvortrag: World conference on regenerative medicine,
Leipzig (eingeladen);
29.10.2009
- 31.10.2009; in: "Regenerative Medicine",
F. Emmrich (Hrg.);
Future Medicine,
4 (6)
(2009),
ISSN: 1746-0751;
S. S58
- S59.
J. Stampfl, C. Heller, M. Schwentenwein, F. Varga, R. Liska:
"Biocompatible and biodegradeable photopolymers for lithography based solid freeform fabrication";
Vortrag: European Polymer Congress 2009,
Graz;
12.07.2009
- 17.07.2009; in: "Book of Abstracts",
F. Stelzer (Hrg.);
(2009),
S. 208.
J. Stampfl, J. Homa, R. Liska:
"Lithography based Additive Manufacturing - Materials and Processes";
Vortrag: ChinaNANO 2015,
Beijing;
03.09.2015
- 05.09.2015; in: "The 6th International Conference on Nanoscience & Technology",
(2015),
S. 179.
J. Stampfl, R. Inführ, B. Seidl, H. Lichtenegger, R. Liska, V. Schmidt, L. Kuna, A. Haase:
"Two-Photon-3D-lithography of Functional Polymers";
Vortrag: Polymerwerkstoffe 2006,
Halle/Saale, Deutschland;
27.09.2006
- 29.09.2006; in: "Polymerwerkstoffe 2006 -Abstracts",
(2006),
ISBN: 3-86010-856-5;
S. 36.
J. Stampfl, R. Inführ, K. Stadlmann, N.U Pucher, H. Lichtenegger, V. Schmidt, R. Liska:
"Materials for the fabrication of optical waveguides with two photon photopolymerization";
Vortrag: Fifth International WLT Conference on Lasers in Manufacturing,
München (eingeladen);
15.06.2009
- 18.06.2009; in: "Lasers in Manufacturing 2009",
A. Ostendorf (Hrg.);
AT Fachverlag GmbH,
Stuttgart
(2009),
S. P1
- P4.
J. Stampfl, J. Kollmer, G. Mitteramskogler:
"Lithographiebasierte Additive Fertigung: Werkstoffe - Anwendungen - Zukunftstrends";
Vortrag: 27. Leobner Kunststoffkolloquium,
Leoben;
19.04.2018
- 20.04.2018; in: "Print&Coat: Polymere in Druck- und Beschichtungstechnologien",
W. Kern (Hrg.);
8
(2018),
ISBN: 978-3-9503248-8-4;
S. 13
- 18.
J. Stampfl, M.H. Luxner, H. E. Pettermann, A. Woesz, P. Fratzl:
"Rapid Prototyping and Modelling of cellular solids";
Vortrag: Euromat 2005,
Prag;
05.09.2005
- 08.09.2005; in: "Euromat 2005 European Congress on Advanced Materials and Processes",
DGM,
http://www.dgm.de/past/2005/euromat2005/programme/
(2005),
Paper-Nr. C12-614,
1 S.
J. Stampfl, G. Mitteramskogler, S. Springer, S. Gruber, A. Ovsianikov, R. Liska:
"Lithography-based Additive Manufacturing of Cellular Ceramic and Composite Structures";
Vortrag: Euromat 2011,
Montpellier;
12.09.2011
- 15.09.2011; in: "Euromat 2011",
(2011),
Paper-Nr. B33-O21H,
1 S.
J. Stampfl, M. Schuster, S. Baudis, H. Lichtenegger, R. Liska, C. Turecek, F. Varga:
"Biodegradable stereolithography resins with defined mechanical properties";
Vortrag: 3rd International conference on virtual and rapid prototyping (VRAP),
Leiria, Portugal;
24.09.2007
- 29.09.2007; in: "Virtual and Rapid Manufacturing",
P. Bartolo (Hrg.);
Taylor and Francis,
(2007),
ISBN: 978-0-415-41602-3;
S. 283
- 288.
J. Stampfl, M. Schuster, C. Heller, R. Liska, C. Turecek, F. Varga:
"Entwicklung und mechanische Charakterisierung bioabbaubarer Photopolymere";
Vortrag: 11. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Merseburg, Deutschland;
20.06.2007
- 22.06.2007; in: "Tagungsband",
(2007),
6 S.
J. Stampfl, M. Schuster, R. Inführ, R. Liska, M.H. Luxner, H. E. Pettermann, F. Varga, C. Turecek:
"Rapid Prototyping als Fertigungswerkzeug zur Herstellung zellularer Strukturen";
Vortrag: 52. Metallkunde Kolloquium,
Lech am Arlberg;
19.04.2006
- 21.04.2006; in: "52. Metallkunde-Kolloquium: Werkstoffforschung für Wirtschaft und Gesellschaft",
(2006),
S. #.
J. Stampfl, J. Torgersen:
"Two Photon Lithography for the Three-dimensional Micro-fabrication of Extracellular Environments";
Vortrag: SME- Medical Manufacturing Innovations,
Mineapolis (eingeladen);
16.04.2013
- 17.04.2013; in: "SME Medical Manufacturing Innovations Eventbrochure",
(2013),
S. 7.
J. Stampfl, J. Torgersen, A. Ovsianikov, X.H. Qin, Z. Li, S Mühleder, W Holnthoner, R. Liska:
"Photo-stimulation of low-toxicity biopolymers in additive manufacturing";
Vortrag: Materials Science and Engineering 2012,
Darmstadt, Deutschland;
25.09.2012
- 27.09.2012; in: "MSE Programme",
(2012),
S. 22.
J. Stampfl, A. Wöß, P. Fratzl, S. Seidler:
"Rapid Prototyping of Ceramic and Polymer Cellular Materials";
Vortrag: 2nd European Medical and Biological Engineering Conference - EMBEC,
Wien;
04.12.2002
- 08.12.2002; in: "IFMBE Proceedings 2002",
(2002),
S. 172
- 173.
J. Stampfl, A. Wöß, S. Seidler:
"Mechanische Eigenschaften von durch Rapid Prototyping hergestellten zellularen Materialien";
Vortrag: 9. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Merseburg;
25.06.2003
- 27.06.2003; in: "Deformation und Bruchverhalten von Kunststoffen",
W. Grellmann (Hrg.);
CD-Rom,
(2003),
ISBN: 3-86010-710-0.
J. Stampfl, A. Wöß, S. Seidler:
"Rapid Prototyping zellularer Materialien";
Poster: Polymerwerkstoffe 2002,
Halle (Saale);
25.09.2002
- 27.09.2002; in: "Polymerwekstoffe 2002",
(2002),
S. 5.
J. Stampfl, A. Wöss, S. Seidler:
"Rapid Prototyping zellularer Materialien";
Poster: 9. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Merseburg (Germany);
25.06.2003
- 27.06.2003; in: "9. Problemseminar Deformation und Bruchverhalten von Kunststoffen, Merseburg (Germany)",
Merseburg (Deutschland)
(2003),
ISBN: 3-86010-710-0;
S. 423
- 424.
J. Stampfl, A. Wöß, S. Seidler, F. Schwager, R. Liska, H. Gruber:
"Water soluble photocurable resins for rapid prototyping applications";
Vortrag: 6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium,
Vienna, Austria;
15.09.2003
- 17.09.2003; in: "6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium ",
(2003),
S. 70.
S. Stanic, A. Altun, D. Reicharlzeder, M. Schwentenwein, S. Baudis, J. Stampfl, R. Liska:
"Highly Filled Hydrogels as Biocomposites and Ceramic Precursors for 3D Printing Aplications";
Poster: Danube Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017",
Book of Abstracts.com,
(2017),
ISBN: 978-3-9504017-6-9;
S. PO-24.
S. Stanic, S. Baudis, M. Schwentenwein, R. Liska:
"3D printing of filled hydrogels as ceramic precursors and biocomposites";
Vortrag: Bypos Workshop 2017,
Zemplínská Sírava, Slovakia;
12.06.2017
- 16.06.2017; in: "Bypos Workshop Book 2017",
(2017),
S. 31.
W. Steiger, P. Gruber, M. Tromayer, A. Dobos, M. Lunzer, R. Liska, A. Ovsianikov:
"Fully automated z-scan setup based on a tunable fs-oscillator";
Vortrag: SPIE Photonics West 2018,
San Francisco, USA;
29.01.2018
- 30.01.2018; in: "Proceedings of SPIE Vol. 10492",
SPI Digital Library,
1049203
(2018).
W. Steiger, P. Gruber, M. Tromayer, M. Lunzer, A. Ajami, W. Husinsky, R. Liska, A. Ovsianikov:
"Fully Automated Z-scan Setup Based on a Tunable FS-Oscillator";
Vortrag: Danube Vltava Sava Polymer meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting",
(2017),
S. OP-102.
P. Steinbauer, S. Orman, C. Hofstetter, M. Schwentenwein, G. Russmüller, J. Stampfl, R. Liska, S. Baudis:
"Biocompatible photopolymer scaffolds tailored for patient specific solutions for bone tissue regeneration";
Poster: 11th World Biomaterials Congress,
Hampshire, United Kingdom, online;
11.12.2020
- 15.12.2020; in: "11th World Biomaterials Congress",
WBC2020VIR-4577
(2020),
1 S.
P. Steinbauer, S. Orman, C. Hofstetter, M. Schwentenwein, G. Russmüller, J. Stampfl, R. Liska, S. Baudis:
"Patient-specific biocompatible polymer scaffolds for bone tissue regeneration";
Poster: 2020 TERMIS EU Abstracts,
Manchester, online;
26.05.2020
- 29.05.2020; in: "2020 TERMIS EU Abstracts",
e Cells und Materials,
2020, Collection 1
(2020),
ISSN: 1473-2262;
S. 308.
J. Steindl, K. Ehrmann, C. Gorsche, C. Huang, T. Koch, P. Steinbauer, A. Rohatschek, O.G. Andriotis, P.J. Thurner, J. Stampfl, R. Liska:
"Maleimide-Styrene-Butadiene Terpolymers As Tough Photopolymers For Additive Manufacturing";
Vortrag: The 6th (virtual) European Symposium of Photopolymer Science,
Wien;
15.06.2021
- 17.06.2021; in: "vESPS 2021",
(2021),
ISBN: 978-3-9504809-3-1;
S. 92.
J. Steindl, T. Koch, N. Moszner, C. Gorsche:
"Silane-Ene-Chemistry: An approach towards regulated photopolymer networks";
Poster: 4th European Symposium of Photopolymer Science,
Leipzig;
11.09.2016
- 14.09.2016; in: "ESPS 2016",
(2016),
S. P-33.
J. Steindl, T. Koch, N. Moszner, C. Gorsche:
"Silanes as promising chain transfer agents for vinyl ester-based photopolymer networks";
Poster: 5th European Symposium of Photopolymer Science,
Mulhouse, France;
03.09.2018
- 06.09.2018; in: "5th European Symposium of Photopolymer Science",
5th European Symposium of Photopolymer Science,
(2018),
S. P45.
J. Steindl, A. Svirkova, T. Koch, M. Marchetti-Deschmann, N. Moszner, C. Gorsche:
"Regulated Photopolymer Networks via Silane-Acrylate Chemistry";
Vortrag: Danube Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017",
Book of Abstracts.com,
(2017),
ISBN: 978-3-9504017-6-9;
S. OP-3.
J. Steindl, A. Svirkova, T. Koch, M. Marchetti-Deschmann, N. Moszner, C. Gorsche:
"Silanes as promising chain transfer agents for radical photopolymerization";
Vortrag: RadTech Europe Conference & Exhibition 2017,
Prag;
17.10.2017
- 19.10.2017; in: "RadTech Europe Conference & Exhibition 2017",
(2017),
S. 15.
M. Stempniewicz, P. Hinkel, S. Weiss, A. Denker, M. Sander, A. Pyzalla:
"Anwendung präparativer Methoden aus der Werkstoffkunde zur Untersuchung von Sauropodenknochen";
Vortrag: 38. Metallographie-Tagung 2004,
Bochum (Deutschland);
29.09.2004
- 01.10.2004; in: "Fortschritte in der Metallographie. Sonderbände der Praktischen Metallographie 36",
DGM / Werkstoff-Informationsgesellschaft,
Band 36
(2004),
ISBN: 3-88355-336-0;
S. 217
- 221.
M. Stempniewicz, A. Pyzalla, B. Hasse, A. Günther, H. Brockmeier:
"Phase and Texture Analyses of Fossil Bone Mineral using Synchrotron Radiation and Neutrons";
Poster: 11. Jahrestagung der Deutschen Gesellschaft für Kristallographie (DGK),
Berlin;
10.03.2003
- 15.03.2003; in: "Humboldt-Universität zu Berlin 11. Jahrestagung der Deutschen Gesellschaft für Kristallographie (DGK) vom 10. bis 13. März 2003 in Berlin",
Oldenbourg Verlag,
München
(2003),
S. 22.
B. Steyrer, R. Liska, J. Stampfl:
"Thermoplasts as Toughening Agent for 3D-Printable Photopolymers";
Vortrag: DVSPM 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017 DVSPM",
Book-of-Abstracts.com,
Gumpoldskirchen-Austria
(2017),
ISBN: 978-3-9504017-6-9;
S. OP-4.
C. Stocker, R. Sonnleitner, G. Nauer, C. Poletti, A. Afjehi-Sadat:
"Ionenätzen zur metallographischen Präparation von Metallen";
Vortrag: 39. Metallographie-Tagung 2005,
Erlangen;
14.09.2005
- 16.09.2005; in: "Fortschritte in der Metallographie. Sonderbände d. prakt. Metallographie, Band 37",
M. Göken (Hrg.);
(2005),
ISBN: 3-88355-343-3;
S. 161
- 166.
M. Susec, S. Ligon, J. Stampfl, R. Liska, P. Krajnc:
"Stereolithography with hierarchical polymers based on high internal phase emulsions";
Poster: European Symposium of Photopolymer Science - ESPS 2012,
Torino;
04.09.2012
- 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts",
(2012),
S. 20.
H. Svajdlenková, O. Sausa, M. Selvek, T. Koch, C. Gorsche, R. Liska:
"Free Volume Study of Dimethacrylates by PALS";
Vortrag: Danube Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017",
Book of Abstracts.com,
(2017),
ISBN: 978-3-9504017-6-9;
S. OP-73.
P. Tesavibul, J. Patzer, R. Felzmann, R. Liska, J. Stampfl:
"Customized ceramic implants made by lithography based additive manufacturing";
Poster: 4. Wiener Biomaterialsymposium,
Wien;
15.11.2010
- 17.11.2010; in: "Tagungsband",
J. Stampfl (Hrg.);
(2010),
S. 25.
A. Teuschl, M. Hohlrieder, J. Stampfl, K. Cicha, M. Griensven, H. Redl:
"Silk scaffolds for the replacement of the anterior cruciate ligament";
Vortrag: 4. Wiener Biomaterialsymposium,
Wien;
15.11.2010
- 17.11.2010; in: "Tagungsband",
J. Stampfl (Hrg.);
(2010),
S. 15.
T. Tiefenböck, L. Hirtler, M Winnisch, J. Jöstl, T. Koch, M. Komjati, M. Hofbauer:
"Biomechanischer Vergleich zweier Unterschiedlicher Bandpräparationstechniken für die Rekonstruktion des vorderen Kreuzbandes - eine anatomische Studie";
Poster: 34. AGA Kongress,
München;
07.09.2017
- 09.09.2017; in: "34. AGA Kongress - Abstracts",
(2017),
Paper-Nr. P02-109,
1 S.
A. Tireira, G. Requena, H. Klocker, A. Borbély:
"3d Study Of Crack Propagation During Tensile Test In Alsi12 Cast Alloy Reinforced With Complex Shape Of Intermetallics";
Vortrag: PhotoMechanics 2013,
Montpellier, France;
27.05.2013
- 29.05.2013; in: "International conference on full-field measurement techniques and their applications in experimental solid mechanics",
(2013).
D. Tolnai, P. Townsend, G. Requena, L. Salvo, J. Lendvai, H.P. Degischer:
"In situ tomographic investigation of the solidification of AlMgSi alloys";
Vortrag: 3D Microstructure Meeting 2011,
Saarbrücken (Deutschland);
02.11.2011
- 04.11.2011; in: "3D Microstructure Meeting 2011",
MatInfo Werkstoffinformationsgesellschaft mbH,
Frankfurt
(2011),
ISBN: 978-3-88355-388-7;
S. 78
- 79.
Z. Tomasikova, B. Husar, X.H. Qin, P. Gruber, M. Markovic, A. Ovsianikov, R. Liska:
"Hyaluronic acid based hydrogels for two photon lithography";
Vortrag: DVSPM 2015,
Gmunden;
11.05.2015
- 13.05.2015; in: "Proceedings of a Conference on Polymer Science",
(2015),
ISBN: 978-3-99033-491-1;
S. 59.
Z. Tomasikova, X.H. Qin, B. Husar, P. Gruber, B. Plochberger, M. Markovic, A. Ovsianikov, J. Stampfl, R. Liska:
"Hyaluronic Acid-Based Hydrogels For Two-Photon Polymerisation Applications";
Poster: ESPS 2014,
Vienna;
09.09.2014
- 12.09.2014; in: "3rd European Symposium of Photopolymer Science",
(2014),
ISBN: 978-3-9502992-9-8;
S. 219.
Z. Tomasikova, X.H. Qin, B. Husar, P. Gruber, B. Plochberger, M. Markovic, A. Ovsianikov, J. Stampfl, R. Liska:
"Two-photon polymerisation of hyaluronic acid-based hydrogels for tissue engineering";
Vortrag: 5th Bratislava Young Polymer Scientists Workshop BYPoS,
Zázrivá;
16.06.2014
- 20.06.2014; in: "BYPoS workshop book",
book of abstracts,
(2014),
ISBN: 978-80-970923-5-1;
S. 91.
B. Tomic, B. Harrer, A. Kottar, H.P. Degischer, L. Zeipper, J. Kastner:
"Charakterisierung der Graphitverteilung in Sphäroguss";
Vortrag: 12. Internationale Metallographie-Tagung,
Leoben, Österreich;
27.09.2006
- 29.09.2006; in: "Fortschritte in der Metallographie. Sonderbände der Praktischen Metallographie",
Band 38
(2006),
S. 113
- 120.
J. Torgersen, A. Baudrimont, N.U Pucher, K. Stadlmann, K. Cicha, C. Heller, R. Liska, J. Stampfl:
"In Vivo Nanostructuring of Biocompatible Materials";
Poster: BioNanoMed 2010,
Krems a.d. Donau;
02.11.2010
- 03.11.2010; in: "BioNanoMed 2010",
(2010),
S. 12.
J. Torgersen, A. Baudrimont, N.U Pucher, K. Stadlmann, K. Cicha, C. Heller, R. Liska, J. Stampfl:
"In Vivo Scaffold Fabrication";
Poster: ESAO-ASAIO Winter School 2011,
Semmering;
26.01.2011
- 29.01.2011; in: "Advancing Roles: Biomaterials in Artificial Organs and Regenerative Medicine",
D. Falkenhagen, E. F. Leonard, S. Mikhalovsky (Hrg.);
(2011),
S. 70.
J. Torgersen, A. Baudrimont, N.U Pucher, K. Stadlmann, K. Cicha, C. Heller, R. Liska, J. Stampfl:
"In Vivo Writing using Two-Photon-Polymerization";
Vortrag: 11th International Symposium on Laser Precision Microfabrication, LPM 2010,
Stuttgart, D;
07.06.2010
- 10.06.2010; in: "Proceedings of LPM2010",
K. Sugioka (Hrg.);
(2010),
S. #10-42.
J. Torgersen, A. Baudrimont, N.U Pucher, K. Stadlmann, K. Cicha, C. Heller, R. Liska, J. Stampfl:
"In-Vivo-Writing mittels Zweiphotonenlithographie";
Vortrag: 4. Wiener Biomaterialsymposium,
Wien;
15.11.2010
- 17.11.2010; in: "Tagungsband- 4. Wiener Biomaterialsymposium",
(2010),
S. 24.
J. Torgersen, A. Baudrimont, N.U Pucher, K. Stadlmann, K. Cicha, C. Heller, J. Stampfl, R. Liska:
"Poster F5-64 In-Vivo Writing using Two-Photon-Polymerization as Enabling Technology for Making Use of Bio-inspired Structures";
Poster: Materials science and engineering MSE 2010,
Darmstadt;
24.08.2010
- 26.08.2010; in: "Tagungsband Material science and engineering 2010",
(2010),
S. 45.
J. Torgersen, A. Baudrimont, N.U Pucher, K. Stadlmann, C. Heller, R. Liska, J. Stampfl:
"Biocompatible Materials structured in-vivo using high-resolution AMT";
Vortrag: Euro Biomat,
Jena;
13.04.2011
- 14.04.2011; in: "Euro Biomat - European Symposium on Biomaterials and Related Areas",
22
(2011),
S. 18.
J. Torgersen, A. Ovsianikov, V. Mironov, N.U Pucher, X.H. Qin, K. Cicha, Z. Li, T. Machacek, V. Jantsch-Plunger, R. Liska, J. Stampfl:
"Biocompatible Hydrogels for the Three-dimensional Micro-fabrication of Extracellular Environments";
Vortrag: Bio-inspired Materials,
Potsdam;
20.03.2012
- 23.03.2012; in: "Bio-inspired Materials International School and Conference on Biological Materials Science",
DGM Programme,
(2012),
S. 20.
M. Tromayer, P. Gruber, A. Ajami, A. Rosspeintner, S. Naumov, A. Ovsianikov, J. Stampfl, R. Liska:
"Synthesis And Characterization Of Aminostyryl-1,3,5-Triazines As Initiators For Two-Photon Induced Polymerization";
Poster: ESPS 2014,
Vienna;
09.09.2014
- 12.09.2014; in: "3rd European Symposium of Photopolymer Science",
(2014),
ISBN: 978-3-9502992-9-8;
S. 220.
M. Tromayer, P. Gruber, K. Hölzl, M. Markovic, S. Vlierberghe, A. Ovsianikov, P. Dubruel, J. Stampfl, R. Liska:
"Hyaluronan-Based Two-Photon Initiator with Enhanced Biocompatibility";
Poster: 10th World Biomaterials Congress,
Montreal, Canada;
17.05.2016
- 22.05.2016; in: "Book of Abstracts",
(2016),
S. 1807.
M. Tromayer, Z. Li, J. Torgersen, A. Ajami, A. Rosspeintner, S. Naumov, R. Liska:
"Preparation and characterization of novel type I/ type II photoinitiators for two-photon submicro-stereolithography";
Poster: Austrian - Slovenian Polymer Meeting - ASPM 2013,
Bled;
03.05.2013
- 05.05.2013; in: "The Proceedings of the Austrian - Slovenian Polymer Meeting - ASPM 2013",
M. Zigon, T. Rajsp (Hrg.);
(2013),
978‐961‐269‐992‐5;
307 S.
M. Tromayer, Z. Li, J. Torgersen, A. Ajami, A. Rosspeintner, S. Naumov, T. Scherzer, A. Ovsianikov, R. Liska:
"Novel Highly Efficient Initiators For Two-Photon Induced Photopolimerization";
Vortrag: RadTech Europe 2013,
Basel;
15.10.2013
- 17.10.2013; in: "Abstract Book",
(2013),
S. 40.
M. Tromayer, M. Markovic, P. Gruber, K. Hölzl, W. Steiger, S. Naumov, T. Scherzer, J. Stampfl, A. Ovsianikov, R. Liska:
"Novel Two-Photon Initiators Based on Cleavable Diazosulfones";
Poster: 4th European Symposium of Photopolymer Science,
Leipzig;
11.09.2016
- 14.09.2016; in: "ESPS 2016",
(2016),
S. P-21.
M. Tromayer, M. Markovic, P. Gruber, K. Hölzl, P. Vlierberghe, P. Dubruel, J. Stampfl, A. Ovsianikov, R. Liska:
"Novel biocompatible two-photon initiator based on hyaluronan";
Poster: TERMIS-EU 2016 conference,
Uppsala, Sweden;
28.06.2016
- 01.07.2016; in: "TERMIS-EU 2016 conference",
European Cells&Materials Journal,
Vol. 31. Suppl. 1, 2016
(2016),
ISSN: 1473-2262;
S. 481.
M. Tromayer, M. Markovic, P. Gruber, K. Hölzl, S. Vlierberghe, P. Dubruel, J. Stampfl, A. Ovsianikov, R. Liska:
"Biocompatible Two-Photon Initiator with Hyaluronan Backbone";
Poster: 4th European Symposium of Photopolymer Science,
Leipzig;
11.09.2016
- 14.09.2016; in: "ESPS 2016",
(2016),
S. P-37.
M. Tromayer, A. Mautner, B. Husar, C. Heller, F. Varga, T. Koch, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"Vinyl carbonates with improved mechanical properties";
Poster: RadTech Europe 2013,
Basel;
15.10.2013
- 17.10.2013; in: "Abstract Book",
(2013),
S. 120.
M. Tromayer, L. Zhiquan, E. Stankevicius, P. Gruber, A. Ajami, W. Husinsky, G. Račiukaitis:
"High-resolution 3D patterning via multi-photon grafting with aromatic azides";
Poster: LPM 2014,
Vilnius;
17.06.2014
- 20.06.2014; in: "LPM 2014 Program & Technical Digest",
(2014),
S. 262.
C. Turecek, M. Schuster, S. Baudis, R. Liska, J. Stampfl, F. Varga:
"Evaluation of biophotopolymers for bone replacement materials capabe for rapid prototyping";
Poster: XXXIV ESAO Congress,
Krems, A;
05.09.2007
- 08.09.2007; in: "The International Journal of Artificial Organs, Abstracts of the XXXIV ESAO Congress",
D. Falkenhagen (Hrg.);
The International Journal of Artificial Organs,
30 (8)
(2007),
ISSN: 0391-3988;
S. 723.
K. Umlaub, S. Reichelt, M. Schmidtchen, E. Kozeschnik:
"Herstellung von Schweißverbindungen mittels Bimetallstreifen";
Vortrag: MEFORM 2014,
Altenberg;
26.03.2014
- 27.03.2014; in: "MEFORM 2014: production and processing of clad materials and metal matrix composites",
TU Bergakad.,
(2014),
ISBN: 9783860124819.
M. Unger, G. Radosavljevic, W. Smetana, L. Zivanov, T. Koch:
"Parameters Governing the Sensor Characteristic of Capacitive Temperature Sensors built up in LTCC-Technology";
Poster: 32nd International Spring Seminar on Electronics Technology (ISSE),
Brno, Czech Republic;
13.05.2009
- 17.05.2009; in: "ISSE 2009 Conference Proceedings",
(2009),
ISBN: 978-1-4244-4260-7;
S. 112
- 113.
M. Unger, W. Smetana, G. Radosavljevic, L. Zivanov, A. Maric, T. Koch, J. Fleig, M. Ahrens:
"High temperature characteristics of various LTCC-tapes";
Vortrag: Second ReClMiCo Workshop: New Trends in Integrated Microsystems and Components,
Novi Sad, Serbia;
05.03.2010
- 06.03.2010; in: "New Trends in Integrated Microsystems and Components",
University of Novi Sad, Faculty of Technical Science,
(2010),
ISBN: 978-86-7892-287-9;
S. 16
- 21.
L. Van Damme, J. Van Hoorick, P. Blondeel, P. Dubruel, A. Ovsianikov, S. van Vlierberghe:
"Crosslinkable gelatins - From Innovative Chemistry and Valorization of Bioinks towards Human Trials: Utopia or Reality?";
Vortrag: 31st Annual Conference of the European Society for Biomaterials (ESB 2021),
Porto, Portugal;
05.09.2021
- 09.09.2021; in: "Abstract booklet",
(2021),
Paper-Nr. S10-KL01, page 679,
1 S.
J. Van Hoorick, A. Dobos, M. Markovic, L. Tytgat, P. Gruber, J Van Erps, H Thienpont, A. Ovsianikov, P. Dubruel, S. van Vlierberghe:
"Tunable Thiol/Ene Gelatin Hydrogels via Crosslinker Variation To Optimize Laser-Based Biofabrication";
Vortrag: 11th World Biomaterials Congress,
UK;
11.12.2020
- 15.12.2020; in: "Programme",
(2020).
J. Van Hoorick, A. Dobos, M. Markovic, L. Van Damme, T. Gheysens, P. Gruber, J Van Erps, H Thienpont, P. Dubruel, A. Ovsianikov, S. Van Vlierberghe:
"Influence of thiolated crosslinker on gel-NB hydrogels: From additive to subtractive manufacturing";
Vortrag: 31st Annual Conference of the European Society for Biomaterials (ESB 2021),
Porto, Portugal;
05.09.2021
- 09.09.2021; in: "ESB 2021 Abstract Booklet",
(2021),
Paper-Nr. S-04, S. 537,
1 S.
J. Van Hoorick, A. Dobos, M. Markovic, L. Van Damme, L. Tytgat, P. Dubruel, B. Van den Bogerd, A. Ovsianikov, S. van Vlierberghe:
"Tailoring Gelatin Via A Chemical Platform For Versatility In Tissue Engineering And Biofabrication";
Vortrag: Termis - 6th World Congress 2021,
Maastricht Virtual;
15.11.2021
- 19.11.2021; in: "Termis - 6th World Congress 2021",
(2021),
S. 394.
J. Van Hoorick, P. Gruber, K. Hölzl, M. Markovic, M. Tromayer, J Van Erps, A. Ovsianikov, H Thienpont, P. Dubruel, S. Van Vlierberghe:
"Two-photon polymerization of gelatin hydrogels: carboxylic acid modification as the key to success";
Poster: 10th World Biomaterials Congress,
Montreal;
17.05.2016
- 22.05.2016; in: "Book of Abstracts",
(2016),
S. 2638.
J. Van Hoorick, P. Gruber, M. Markovic, J. Zegwaar, M. Tromayer, J Van Erps, H. Thienpont, A. Ovsianikov, P. Dubruel, S. Vlierberghe:
"A range of gelatin derivatization strategies lead to biofabrication versatility";
Poster: TERMIS-EU 2017: Personalised Therapies for Regenerative Medicine,
Davos;
24.06.2017
- 30.06.2017; in: "eCM Meeting Abstracts 2017, Collection 2; TERMIS-EU 2017 Conference",
eCM Conferences Open Access online periodical,
(2017),
ISSN: 2522-235x;
Paper-Nr. P027,
1 S.
J. Van Hoorick, M. Markovic, P. Gruber, L. Tytgat, J Van Erps, H Thienpont, A. Ovsianikov, P. Dubruel, S. Van Vlierberghe:
"Thiolated Crosslinker effect on Physico-Chemical properties and Laser-Based Processing of Gelatin Thiol-ene Hydrogels";
Vortrag: The International Conference on Biofabrication 2018,
Würzburg;
28.10.2018
- 31.10.2018; in: "The International Conference on Biofabrication 2018",
Abstract book,
(2018),
S. O14.
J. Van Hoorick, A. Ovsianikov, H. Declerq, M. Cornelissen, J Van Erps, P. Dubruel, S. Van Vlierberghe:
"Additive manufacturing of 3D gelatin scaffolds: direct versus indirect printing";
Poster: 10th World Biomaterials Congress,
Montreal;
17.05.2016
- 22.05.2016; in: "Book of Abstracts",
(2016).
K Varga, R. N. Ibbett, T. Koch, K. Föttinger, K.C. Schuster:
"Hydrated structure of natural and man-made cellulosic fibres characterised by thermal and spectroscopic techniques";
Vortrag: Polymer Fibres 2008. The International Polymer Fibre Conference.,
Manchester;
09.07.2008
- 11.07.2008; in: "Polymer Fibres 2008",
(2008),
1 S.
K Varga, U Schädel, T. Koch, M Abu-Rous, K.C. Schuster:
"Calorimetric investigation of of thermoregulating properties of textiles containing Tencel(R), PES and phase change materials.";
Vortrag: AUTEX 2007, 7th Annual Textile Conference by Autex,
Tampere;
26.06.2007
- 28.06.2007; in: "Proceedings AUTEX 2007 "From Emerging Innovations to Global Business"",
(2007),
ISBN: 978-952-15-1794-5;
9 S.
K Varga, U Schädel, T. Koch, K. Föttinger, H. Vinek, M Abu-Rous, K.C. Schuster:
"Thermal methods in physiological characterisation of man-made cellulosic fibers.";
Poster: 2nd EPNoE PhD Students Meeting,
Jena;
02.04.2007
- 04.04.2007; in: "2nd EPNoE PhD Students Meeting",
(2007).
T. Verdianz, M. Schuster, M. Rumpler, C. Turecek, F. Varga, J. Stampfl, R. Liska:
"Biophotopolymers for rapid prototyping of cellular bone replacement materials";
Poster: European Polymer Congress 2005,
Moskau, Russland;
27.06.2005
- 01.07.2005; in: "CD European Polymer Congress 2005",
(2005),
Paper-Nr. P4.4.18 Ref.2290,
2 S.
B. Viernstein, E. Kozeschnik:
"Computational analysis of deformation maps";
Vortrag: MEFORM 2020,
Freiberg;
18.03.2021
- 19.03.2021; in: "The Metal Forming Conference MEFORM 2020",
TU Bergakademie Freiberg,
(2021),
ISBN: 978-3-86012-632-5;
S. 34
- 36.
B. Viernstein, P. Schumacher, B. Milkereit, E. Kozeschnik:
"State Parameter-Based Simulation of Temperature- and Strain Rate Dependent Flow Curves of Al-Alloys";
Vortrag: TMS Annual Meeting & Exhibition 2020,
San Diego;
23.02.2020
- 27.02.2020; in: "Light Metals 2020",
Springer,
(2020),
ISBN: 978-3-030-36408-3;
S. 267
- 271.
Y Voronko, G Eder, B. Chernev, M Knausz, G Oreski, T. Koch, K Berger:
"Analytical evaluation of the ageing induced changes of the adhesive within photovoltaic backsheets";
Poster: 28th European Photovoltaic Solar Energy Conference and Exhibition,
Paris;
30.09.2013
- 04.10.2013; in: "EU PVSEC Proceedings",
(2013),
ISBN: 3-936338-33-7;
Paper-Nr. 4AV.4.10,
6 S.
Y Voronko, G Eder, M Knausz, G Oreski, T. Koch, K Berger:
"Influence of environmental factors on the ageing behaviour of photovoltaic backsheets";
Vortrag: 6th European Weathering Symposium Natural and Artificial Ageing of Polymers,
Bratislava;
11.09.2013
- 13.09.2013; in: "6th European Weathering Symposium Natural and Artificial Ageing of Polymers",
Gesellschaft für Umweltsimulation,
(2013),
ISBN: 978-3-9813136-8-0;
S. 1
- 9.
Y Voronko, G Eder, M Weiss, M Knausz, G Oreski, T. Koch, K Berger:
"Long Term Performance of PV Modules: System Optimization through the Application of Innovative Non-Destructive Characterization Methods";
Poster: 27th European Photovoltaic Solar Energy Conference and Exhibition,
Frankfurt;
24.09.2012
- 28.09.2012; in: "Proceedings",
(2012),
ISBN: 3-936338-28-0;
6 S.
Y Voronko, G Eder, M Weiss, M Knausz, G Oreski, T. Koch, K Berger:
"Long Term Performance of PV Modules: System Optimization through the Application of Innovative Non-Destructive Characterization Methods";
Poster: 10. Österreichische Photovoltaik Tagung,
Laxenburg;
18.10.2012
- 19.10.2012; in: "Publikationen",
(2012),
1 S.
K. Wallisch, B. Mrozek, T. Koch, S. Knaus:
"Bulk Modification Of Pp By Peroxide-Initiated Radical Grafting Of Epoxy-Functional Maleimides And Methacrylates";
Poster: Advances in Polymer Science and Technology 1,
Linz;
08.07.2009
- 10.07.2009; in: "Proceedings of a Conference on Polyolefins and Polymelamines",
Trauner Verlag,
Linz
(2009),
ISBN: 978-3-85499-632-3;
S. 36.
K. Wallisch, B. Mrozek, T. Koch, S. Knaus:
"Epoxy-Functionalization of PP by Peroxide-Initiated Radical Grafting";
Poster: EPF 2009, European Polymer Congress,
Graz, A;
12.07.2009
- 17.07.2009; in: "EPF'09, Book of Abstracts",
(2009),
S. 102.
F. Warchomicka, C. Poletti, M. Stockinger:
"Microstructural characterization of hot deformed Ti-6Al-4V";
Vortrag: Ti-2011 The 12th World Conference on Titanium,
Beijing - China;
19.06.2011
- 24.06.2011; in: "Ti-2011",
(2011).
F. Warchomicka, C. Poletti, M. Stockinger, H.P. Degischer:
"Determination of the mechanism of restoration in subtransus hot deformation of Ti-6Al-4V";
Vortrag: THERMEC 2011, International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS Processing, Fabrication, Properties, Applications,
Quebec - Canada;
01.08.2011
- 05.08.2011; in: "THERMEC 2011",
Materials Science Forum / Trans Tech Publications,
706-709
(2012),
ISSN: 1662-9752;
S. 252
- 257.
F. Warchomicka, C. Poletti, M. Stockinger, T. Henke:
"Microstructure evolution during hot deformation of Ti-6Al-4V double cones specimens";
Vortrag: Esaform,
Brescia - Italy;
07.04.2010
- 09.04.2010; in: "International Journal of Material Forming",
International Journal of Material Forming,
Volume 3 supplement 1
(2010),
ISSN: 1960-6206;
S. 215
- 218.
F. Warchomicka, M. Stockinger, H.P. Degischer:
"Effect of the hot deformation on the microstructure of Ti-10V-2Fe-3Al";
Vortrag: 12. Internationale Metallographie-Tagung,
Leoben, Österreich;
27.09.2006
- 29.09.2006; in: "Fortschritte in der Metallographie",
A. Kneissl (Hrg.);
Werkstoff-Informationsgesellschaft mbH,
Sonderbände der Praktischen Metallographie 38
(2006),
ISBN: 3-88355-354-9;
S. 223
- 230.
F. Warchomicka, M. Stockinger, H.P. Degischer:
"Flow behaviour and microstructure during hot deformation of Ti-5Al-5Mo-5V-3Cr-1Zr";
Poster: 11 th World Conference on Titanium,
Kyoto/ Japan;
03.06.2007
- 07.06.2007; in: "Proceedings of Ti-2007, The 11th World Conference on Titanum",
(2007),
ISBN: 978-4-88903-406-6;
S. 511
- 514.
F. Warchomicka, M. Stockinger, C. Poletti:
"Characterization of the microstructure evolution of near beta titanium alloys during hot deformation";
Vortrag: Praktischen Metallographie,
Jena, Deutschland;
17.09.2008
- 19.09.2008; in: "Sonderbände der Praktischen Metallographie",
G Petzow (Hrg.);
"Fortschritte in der Metallographie", Mat Info / Werstoff-Informationsgesselschaft,
40
(2008),
ISBN: 3-88355-370-0;
S. 249
- 254.
P. Warczok, Y. Shan, E. Kozeschnik:
"Monte-Carlo study of coherent bcc-Cu precipitation in alpha-iron";
Vortrag: Asia Steel 2009,
Busan;
24.05.2009
- 27.05.2009; in: "Proc. Asia Steel 2009",
(2009),
S. S13-29.
P. Warczok, Y. Shan, M. Schober, H. Leitner, E. Kozeschnik:
"Analysis of clustering characteristics during early stages of Cu precipitation in bcc-Fe";
Vortrag: PTM 2010 Solid-Solid Phase Transformation in Inorganic Materials,
Avignon;
06.06.2010
- 11.06.2010; in: "Proceedings of «PTM 2010»",
Solid State Phenomena,
172-174
(2011),
ISSN: 1012-0394;
S. 309
- 314.
W.W. Wei, E. Povoden-Karadeniz, E. Kozeschnik:
"Study of growth kinetics of deformation twins in AZ31 magnesium alloy";
Vortrag: THERMEC´2016,
Graz;
29.05.2016
- 03.06.2016; in: "Thermec 2016",
C. Sommitsch et al. (Hrg.);
Trans Tech Publications Inc.,
Materials Science Forum, Volume 879
(2017),
ISBN: 978-3-0357-1129-5;
S. 2084
- 2087.
G. Weisgrab, O. Guillaume, Z. Guo, A. Poot, D. Grijpma, A. Ovsianikov:
"Fabrication of high-resolution poly(trimethylene)-based scaffolds using 2-photon polymerization";
Vortrag: 30th Annual Conference of the European Society for Biomaterials,
Dresden;
09.09.2019
- 13.09.2019; in: "ESB 2019 Abstract Booklet",
(2019),
S. 20
- 21.
G. Weisgrab, O. Guillaume, A. Ovsianikov:
"Upscaling Modular Tissue Engineering";
Vortrag: 11th World Biomaterials Congress,
UK;
11.12.2020
- 15.12.2020; in: "Programme",
(2020).
G. Weisgrab, O. Guillaume, A. Ovsianikov:
"Upscaling Modular Tissue Engineering";
Poster: 733rd WE-Heraeus-Seminar for Nanobiotechnology for Cell Interfaces,
Virtual;
17.03.2021
- 18.03.2021; in: "Nanobiotechnology for Cell Interfaces",
(2021),
1 S.
M. Weiss, C. Riedl, H. Riedl, J. Frank, P.H. Mayrhofer, J. Fleig, A. Limbeck:
"Online Laser Ablation of solids in Liquids (LASIL) as a versatile tool for quantitative thin film analysis";
Vortrag: AOFKA - Applied Surface and Solid State Analytics,
Freiberg;
06.10.2021
- 08.10.2021; in: "Scientific program - Abstracts",
(2021),
S. 27.
M. Weiss, H. Riedl, P.H. Mayrhofer, J. Fleig, A. Limbeck:
"Laser based elemental analysis of multilayer systems";
Vortrag: 20. Tagung Festkörperanalytik - 20th Conference on Solid State Analysis,
Wien;
01.07.2019
- 03.07.2019; in: "Abstracts",
(2019).
M. Weiss, H. Riedl, P.H. Mayrhofer, A. Limbeck:
"Determination of the stochiometric composition of ternary boride thin films via LA-ICP-MS and LIBS";
Vortrag: ANAKON 2019,
Münster, Germany;
25.03.2019
- 28.03.2019; in: "Programm",
(2019),
S. 100.
M. Weiss, H. Riedl, P.H. Mayrhofer, A. Limbeck:
"Quantification strategies for stoichiometry determination of thin films via LA‐ICP‐MS";
Poster: 30th MassSpec-Forum Vienna,
Vienna;
19.02.2019
- 20.02.2019; in: "Book of Abstracts",
(2019),
S. 54.
M. Weiss, D. Wipp, E. Povoden-Karadeniz, A. Limbeck:
"LA-ICP-MS depth profiling of micro-alloyed steels";
Poster: 20. Tagung Festkörperanalytik - 20th Conference on Solid State Analysis,
Wien;
01.07.2019
- 03.07.2019; in: "Abstracts",
(2019).
T. Weisz, H. Buken, D. Lukavsky, A. Falahati, T. Ebner, E. Kozeschnik:
"Rekristallisation in 6xxx Legierungen: Experiment und Modellierung";
Vortrag: 9. Ranshofener Leichtmetalltage,
Bad Ischl;
09.11.2016
- 10.11.2016; in: "Tagungsband 9. Ranshofener Leichtmetalltage",
Ranshofen
(2016),
ISBN: 978-3-902092-09-0;
S. 89
- 98.
L.C. Whitmore, T. Koch, S. Abermann, K. Whitmore, A. Steiger-Thirsfeld:
"Transmission electron microscopy of indented and scratched titanium-alumina layers on silicon";
Poster: Microscopy Conference Graz, Dreiländertagung,
Graz;
30.08.2009
- 04.09.2009; in: "MC Graz 2009",
Facultas Verlag,
(2009),
ISBN: 978-3-85125-062-6;
S. 459
- 460.
E. Wild, M. Hohlrieder, H. Redl, A. Teuschl, J. Stampfl:
"Fixierungssysteme für ein künstliches vorderes Kreuzband";
Vortrag: 4. Wiener Biomaterialsymposium,
Wien;
15.11.2010
- 17.11.2010; in: "Tagungsband",
J. Stampfl (Hrg.);
(2010),
S. 22.
A. Wilke, S. Baudis, H. Wilhelm, H. Bergmeister, F. Nehl, R. Liska, J. Stampfl:
"Additive Manufactured Photoelastomers as Tailor-made Biomaterials for Vascular Tissue Restoration";
Vortrag: Euromat 2011,
Montpellier;
12.09.2011
- 15.09.2011; in: "Euromat 2011 Montpellier",
(2011),
S. 0264-1-1.
A. Wöß, J. Stampfl, P. Fratzl:
"Rapid Prototyping biomimetisch gestalteter Materialien";
Vortrag: 14. DGM Symposium Verbundwerkstoffe und Werkstoffverbunde,
Wien;
02.07.2003
- 04.07.2003; in: "Verbundwerkstoffe",
H.P. Degischer (Hrg.);
Wiley-VCH,
Weinheim
(2003),
ISBN: 3-527-30762-1;
S. 785
- 789.
T. Wojcik, E. Kozeschnik:
"Influence of NbC-Precipitation on Hot Ductility in Microalloyed Steel - TEM study and thermokinetic modeling";
Vortrag: THERMEC´2016,
Graz;
29.05.2016
- 03.06.2016; in: "THERMEC 2016",
Trans Tech Publications Inc.,
Materials Science Forum, Volume 879
(2017),
ISBN: 978-3-0357-1129-5;
S. 2107
- 2112.
T. Wojcik, E. Kozeschnik:
"Shell-wise growth of (Nb,Ti)(C,N) precipitates during cyclic cooling of microalloyed steel";
Poster: 18th International Microscopy Congress,
Prag;
07.09.2014
- 12.09.2014; in: "18th International Microscopy Congress",
(2014),
ISBN: 978-80-260-6720-7;
S. 2877.
H. Wutzel, J. Kumpfmüller, K. Stadlmann, Z. Li, J. Stampfl, R. Liska:
"Silicon-based waveguides via two-photon induced thiol-ene polymerization";
Vortrag: European Symposium of Photopolymer Science - ESPS 2012,
Torino;
04.09.2012
- 07.09.2012; in: "European Symposium of Photopolymer Science",
(2012).
H. Wutzel, A. Mautner, X.H. Qin, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"New monomers based on vinylcarbonates for biomedical applications";
Poster: European Symposium of Photopolymer Science - ESPS 2012,
Torino;
04.09.2012
- 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts",
(2012),
S. 23.
B. Yang, H. Knoblich, H.P. Degischer, G. Xia, A. Niedermayr:
"Quantifizierung der Oszillationsmarken auf Stranggussbrammen";
Vortrag: 11. Internationale Metallographie-Tagung,
Leoben;
11.09.2002
- 13.09.2002; in: "Fortschritte in der Metallographie",
A. Kneissl, F. Jeglitsch (Hrg.);
Werkstoff-Informationsges.m.b.H.,
34
(2003),
ISBN: 3-88355-313-1;
S. 365
- 372.
J. Zalesak, M. Bartosik, P.H. Mayrhofer, J. Keckes:
"Multi-Scale Mechanical Properties of Nanocrystalline Coatings Revealed by Micro- and Nano-Mechanical Tests";
Vortrag: 41st International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego, CA;
28.04.2014
- 02.05.2014; in: "Book of abstracts",
(2014).
S. Zamberger, E. Kozeschnik:
"Precipitation in Tempered Martensite - Simulation and Experiment";
Vortrag: THERMEC 2011, International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS Processing, Fabrication, Properties, Applications,
Quebec - Canada;
01.08.2011
- 05.08.2011; in: "THERMEC 2011",
Materials Science Forum / Trans Tech Publications,
706-709
(2012),
ISSN: 1662-9752;
S. 1586
- 1591.
S. Zamberger, P. Lang, E. Kozeschnik:
"Modeling the influence of atomic traps on H diffusion and solubility in steel";
Vortrag: 11th International Seminar "Numerical Analysis of Weldability",
Graz (eingeladen);
27.09.2015
- 30.09.2015; in: "Proc. 11th Int. Seminar on Numerical Analysis of Weldability",
(2016),
ISBN: 978-3-85125-490-7;
S. 423
- 433.
T Zandrini, S. Sayer, M. Markovic, J. Van Hoorick, O.G. Andriotis, P.J. Thurner, S. Van Vlierberghe, A. Ovsianikov:
"Guided cell migration and vascular sprouts formation through high-definition laser grafting";
Vortrag: TERMIS,
Virtual;
15.11.2021
- 19.11.2021; in: "Abstract book",
(2021),
S. 969.
T Zandrini, S. Sayer, M. Markovic, J. Van Hoorick, S. van Vlierberghe, A. Ovsianikov:
"Guided cell migration through laser-induced grafting in a gelatin hydrogel";
Vortrag: EUROMAT 2021,
Online;
13.09.2021
- 17.09.2021; in: "Report of Abstracts",
(2021),
Paper-Nr. 1313,
1 S.
T Zandrini, K. Watanabe, M. Markovic, M. Lunzer, J. Van Hoorick, A. Dobos, S. van Vlierberghe, R. Sudo, A. Ovsianikov:
"Microstructured gel engineering of vascular network inside a microfluidic chip";
Vortrag: 11th World Biomaterials Congress,
UK;
11.12.2020
- 15.12.2020; in: "Programme",
(2020).
E. Zerobin, S. Baudis, Z. Tomasikova, X.H. Qin, M. Markovic, P. Gruber, J. Stampfl, A. Ovsianikov, R. Liska:
"High Resolved Biocompatible Hydrogel Constructs based on Hyaluronic Acid";
Poster: 4th European Symposium of Photopolymer Science,
Leipzig;
11.09.2016
- 14.09.2016; in: "ESPS 2016",
(2016),
S. P-34.
E. Zerobin, S. Baudis, Z. Tomasikova, X.H. Qin, M. Markovic, P. Gruber, J. Stampfl, A. Ovsianikov, R. Liska:
"Micro fabrication of hydrogels based on hyaluronic acid";
Vortrag: 6th Bratislava Young Polymer Scientists Workshop,
High Tatras, Slovakia;
14.03.2016
- 18.03.2016; in: "BYPoS Workshop book",
book of abstracts,
(2016),
ISBN: 978-80-970923-8-2;
S. 107.
E. Zerobin, W. Steiger, M. Markovic, S. Baudis, A. Ovsianikov, R. Liska:
"Molecular Design Towards Novel Photo-Initiators with Increased Two-Photon Absorption Cross Section";
Vortrag: VSS 2018 - Vienna Young Scientists Symposium,
Wien;
07.06.2018
- 08.06.2018; in: "VSS 2018",
Book-of-Abstracts.com,
(2018),
ISBN: 978-3-9504017-8-3;
S. 106
- 107.
E. Zerobin, M. Tromayer, A. Dobos, W. Steiger, M. Markovic, S. Baudis, A. Ovsianikov, R. Liska:
"Molecular Design towards Two-Photon Initiators with Reduced Phototoxicity";
Poster: 5th European Symposium of Photopolymer Science,
Mulhouse, France;
03.09.2018
- 06.09.2018; in: "5th European Symposium of Photopolymer Science",
5th European Symposium of Photopolymer Science,
(2018),
S. P50.
E. Zerobin, M. Tromayer, A. Dobos, W. Steiger, M. Markovic, S. Baudis, A. Ovsianikov, R. Liska:
"Promoting Initiation-Efficiency and Biocompatibility of Two-Photon Initiators by the Introduction of Photolabile Moieties";
Poster: Symposium 'BSTE 2018: Next Generation Tissue Engineering',
Ghent, Belgien;
21.11.2018
- 23.11.2018; in: "BSTE 2018: Next Generation Tissue Engineering",
(2018),
S. PO43.
E. Zerobin, M. Tromayer, P. Gruber, M. Markovic, S. Baudis, J. Stampfl, A. Ovsianikov, R. Liska:
"Newly Developed Hydrogel Precursors and Two-Photon Initiators Based on Hyaluronic Acid";
Vortrag: AMBA 2017, Advanced Materials for Biomedical Applications,
Ghent, Belgium;
27.09.2017
- 29.09.2017; in: "AMBA 2017, Advanced Materials for Biomedical Applications",
(2017),
S. 62.
E. Zerobin, M. Tromayer, P. Gruber, M. Markovic, S. Baudis, J. Stampfl, A. Ovsianikov, R. Liska:
"Two-Photon Initiator Development and Hydrogel Networks Based on Hyaluronic Acid";
Vortrag: Danube Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017",
Book of Abstracts.com,
(2017),
ISBN: 978-3-9504017-6-9;
S. OP-32.
Z. Zhang, R. Rachbauer, D. Holec, P.H. Mayrhofer:
"Impact of Al on structure and mechanical properties of NbN and TaN";
Vortrag: Plansee Seminar 2013,
Reutte;
03.06.2013
- 07.06.2013; in: "Book of Abstracts",
(2013).
L. Zhiquan, M. Siklos, N.U Pucher, K. Cicha, A. Ajami, W. Husinsky, J. Stampfl, R. Liska:
"Synthesis and structure-activity relationship of serveral keton-based two-photon initiators";
Poster: European Symposium of Photopolymer Science,
Mulhouse, France;
28.11.2010
- 01.12.2010; in: "European Symposium of Photopolymer Science - Abstract Book",
(2010).
L. Zhou, D. Holec, P.H. Mayrhofer:
"First-principles study of electronic, elastic and thermodynamic properties of CrN";
Vortrag: International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2013,
San Diego;
29.04.2013
- 03.05.2013; in: "Book of Abstracts",
(2013).
L. Zhou, D. Holec, P.H. Mayrhofer:
"Phase stability, structural and elastic properties of ternary Cr1-xTMxN: An ab-initio study";
Poster: International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2013,
San Diego;
29.04.2013
- 03.05.2013; in: "Book of Abstracts",
(2013).
K. Ziehenberger, R. Schnöll, H.P. Degischer:
"Gefügecharakterisierung hochlegierter, karbidreicher Gußwerkstoffe an einem automatisch arbeitenden Bildanalysesystem unter Zuhilfenahme eines kontrastreichen Ätzverfahrens";
Vortrag: 11. Internationale Metallographie-Tagung,
Leoben;
11.09.2002
- 13.09.2002; in: "Fortschritte in der Metallographie",
A. Kneissl, F. Jeglitsch (Hrg.);
Werkstoff-Informationsges.m.b.H.,
34
(2003),
ISBN: 3-88355-313-1;
S. 187
- 193.
S. Zigon-Branc, M. Markovic, J. Van Hoorick, O.G. Andriotis, E. Zerobin, S. Baudis, P.J. Thurner, P. Dubruel, S. Van Vlierberghe, A. Ovsianikov:
"3D Differentiation of human Adipose-derived stem cells/hTERT in Methacrylate Gelatin Hydrogels with Different Stiffness";
Poster: TERMIS World Congress 2018,
Kyoto;
04.09.2018
- 07.09.2018; in: "Abstract Book",
(2018),
S. 603.
S. Zigon-Branc, M. Markovic, J. Van Hoorick, S. Van Vlierberghe, P. Dubruel, E. Zerobin, S. Baudis, A. Ovsianikov:
"Impact of hydrogel stiffness on differentiation of human adipose-derived stem cell microspheroids";
Poster: TERMIS European Chapter Meeting 2019,
Rhodes Greece;
27.05.2019
- 31.05.2019; in: "TERMIS EU 2019 Conference Book",
(2019),
S. 1414.
N. Zwirchmayr, P. Potzmann, C. Grasl, T. Koch, H. Bergmeister, R. Liska:
"Segmented linear thermoplastic urethane elastomers with novel building blocks for electrospinning of vascular grafts";
Vortrag: 5th Bratislava Young Polymer Scientists Workshop BYPoS,
Zázrivá;
16.06.2014
- 20.06.2014; in: "BYPoS workshop book",
book of abstracts,
(2014),
ISBN: 978-80-970923-5-1;
S. 93.
Vorträge und Posterpräsentationen (ohne Tagungsband-Eintrag)
B. Adjassoho, E. Kozeschnik, C. Lechner, Ch. Habersohn, F. Bleicher, S. Gössinger, C. Bauer, F. Heindl, M. Rodríguez Ripoll, C Tomastik:
"Controlled surfaces treatment with MAchine Hammer Peening";
Vortrag: METAL 2013,
Brno;
15.05.2013
- 17.05.2013.
M. Ahmadi, O.G. Andriotis, A. Hochwallner, P.J. Thurner, J. Stampfl:
"Phase Separation in (Meth)acrylate-based Photopolymers";
Vortrag: ESIAM,
Vienna;
09.09.2019
- 11.09.2019.
M. Ahmadi, A. Hochwallner, O.G. Andriotis, P.J. Thurner, J. Stampfl:
"Characterization of Phase-Separated (Meth)acrylate Photopolymers";
Poster: EUROMAT 2021,
Wien;
13.09.2021
- 17.09.2021.
M.R. Ahmadi, A. Falahati, E. Kozeschnik:
"A model for precipitation strengthening in multi-particle systems";
Vortrag: 17th International Conference on the Strength of Materials (ICSMA 17),
Brno (eingeladen);
09.08.2015
- 14.08.2015.
M.R. Ahmadi, A. Falahati, E. Kozeschnik:
"Modified equations for precipitation strengthening in Al- Cu alloys taking into account precipitate shape";
Vortrag: Euro LightMAT Conference 2013,
Bremen, Germany (eingeladen);
03.09.2013
- 05.09.2013.
M.R. Ahmadi, A. Falahati, E. Kozeschnik:
"Modified equations for precipitation strengthening in Al- Cu-(Mg) alloys (taking into account precipitate shape)";
Vortrag: MSE Conference 2012,
Darmstadt, Germany (eingeladen);
25.09.2012
- 27.09.2012.
M.R. Ahmadi, E. Kozeschnik, A. Falahati:
"Strengthening simulation in Al-Mg-Si (Cu) alloys based on modified strengthening equations considering precipitate shapes";
Vortrag: European Conference on Aluminium Alloys - ECAA 2011,
Bremen, Germany (eingeladen);
05.10.2011
- 07.10.2011.
M.R. Ahmadi, L.C. Whitmore, E. Povoden-Karadeniz, M. Stockinger, A. Falahati, E. Kozeschnik:
"Precipitation strengthening in multi-phase systems - Modeling and application to superalloy 718Plus";
Vortrag: THERMEC 2013,
Las Vegas;
02.12.2013
- 06.12.2013.
A. Ajami, Z. Li, A. Ovsianikov, J. Torgersen, J. Stampfl, W. Husinsky:
"Effect of Concentration of Chromophores on Two-photon Absorption Cross Section";
Poster: 50 years of nonlinear optics, NLO 50 International Symposium,
Barcelona/Spain;
08.10.2012
- 10.10.2012.
S.R. Alavi Zaree:
"Characterization of the extruded particle reinforcement tool steel";
Vortrag: Seminar Research in progress on metallic materials,
Bratislava;
02.10.2008
- 03.10.2008.
W. Altendorfer, M. Schöbel, E. Gröller, H.P. Degischer:
"Bildregistrierung für 3D-Darstellung von Poren in Metallmatrixverbundwerkstoffen";
Vortrag: Sitzung des DGM-Fachausschusses "Metallische Verbundwerkstoffe und zellulare Metalle",
Fürth, Deutschland;
11.11.2008.
W. Altendorfer, M. Schöbel, E. Gröller, H.P. Degischer:
"Void Tracking in SiC Particle Reinforced Al by Means of 3D Image Registration Based on Mutual Information";
Poster: Junioreuromat 2008,
Lausanne;
14.07.2008
- 17.07.2008.
W. Altendorfer, M. Schöbel, E. Gröller, H.P. Degischer:
"Void Tracking in SiC Reinforced Al";
Vortrag: Sitzung des Arbeitskreises Tomographie im Fachausschuss Materialographie der DGM,
Wien;
02/2008.
V. Archodoulaki:
"Technische Herausforderungen beim Kunststoffrecycling";
Vortrag: e·nova 2020 - internationale Konferenz - 26./27. November 2020,
FH Burgenland;
26.11.2020
- 27.11.2020.
V. Archodoulaki, M. Huber, M Gahleitner:
"Occurrence of microplastics in the aquatic environment";
Poster: CIS 2019,
Italien;
28.08.2019
- 30.08.2019.
V. Archodoulaki, T. Koch, S. Lüftl, C. Schoberleitner:
"Werkstoffauswahl";
Vortrag: Pressekonferenz,
Bratislava, Slowakei;
28.07.2010.
E. Aschauer, M. Bartosik, P. Polcik, M. Arndt, H. Riedl, P.H. Mayrhofer:
"Nano beam X-ray diffraction analysis of stress and strain in high-temperature oxidation resistant Ti1-xAlxN/Mo-Si-B multilayer coatings";
Vortrag: EUROMAT 2017,
THESSALONIKI;
17.09.2017
- 22.09.2017.
E. Aschauer, P. Felfer, M. Arndt, P. Polcik, H. Riedl, P.H. Mayrhofer:
"Oxygen Diffusion Pathways in High Temperature Oxidation Resistant Ti-Al-N/Mo-Si-B Multilayer Coating";
Vortrag: 45th International Conference on Metallurgical Coatings and Thin Films 2018,
San Diego;
23.04.2018
- 27.04.2018.
E. Aschauer, P. Felfer, H. Bolvardi, M. Arndt, P. Polcik, P.H. Mayrhofer, H. Riedl:
"Fundamental study of oxygen induced decomposition pathways in PVD deposited TiAlN/Mo-Si-B multilayer coatings";
Vortrag: EMRS Spring Meeting 2019,
Nizza;
27.05.2019
- 31.05.2019.
E. Aschauer, P. Felfer, C Macauley, M. Arndt, H. Bolvardi, P. Polcik, P.H. Mayrhofer, H. Riedl:
"Influence of Ti on the phase evolution of magnetron sputtered PVD deposited Mo-Si-B coatings";
Poster: EMRS Spring Meeting 2019,
Nizza;
27.05.2019
- 31.05.2019.
E. Aschauer, S. Sackl, M. Bartosik, T. Schachinger, M. Arndt, P. Polcik, H. Riedl, P.H. Mayrhofer:
"Atomic scale investigations of thermally treated MoSiB/TiAlN nano-multilayers";
Vortrag: Metallkunde Kolloquium Lech Arlberg,
Lech;
18.04.2017
- 21.04.2017.
E. Aschauer, S. Sackl, C.M. Koller, T. Schachinger, M. Arndt, P. Polcik, H. Riedl, P.H. Mayrhofer:
"Atomic scale investigations of thermally treated MoSiB/TiAlN nano-multilayers";
Vortrag: EMRS Spring Meeting 2017,
Straßburg;
22.05.2017
- 26.05.2017.
E. Aschauer, T. Wojcik, P. Polcik, O Hunold, M. Arndt, V. Dalbauer, P.H. Mayrhofer, P. Felfer, H. Riedl:
"Ultra high oxidation resistance of nano-structured thin films";
Poster: AVS 2020 International Twitter Poster Competition,
Online;
06.07.2020.
Z. Asghar:
"Effect of Ni-intermetallics on the strength of an AlSi12 alloy";
Vortrag: Seminar Research in progress on metallic materials,
Bratislava;
02.10.2008
- 03.10.2008.
Z. Asghar, G. Requena, H.P. Degischer, E. Boller:
"The effect of 3D networks formed by aluminides and eutectic Si on the high temperature strength of cast Al-Si piston alloys";
Vortrag: Materials science and engineering MSE 2010,
Darmstadt, Deutschland;
24.08.2010
- 26.08.2010.
P. Barriobero Vila:
"Influence of the initial microstructure on the phase transformation of Ti-10V-2Fe-3Al";
Vortrag: ESRF and HASYLAB User's meeting 2012,
Grenoble (France), Hamburg (Germany);
07.02.2013
- 08.02.2013.
P. Barriobero Vila:
"Phase transformation kinetics of a β metastable Ti-alloy";
Vortrag: ALBA User meeting 2013,
Cerdanyola del Vallès (Barcelona);
03.09.2013
- 06.09.2013.
M. Bartosik, R Hahn, Z. Zhang, P.H. Mayrhofer:
"Micro-fracture experiments on nanocomposite hard coatings";
Poster: (17AN) Nanomechanical Testing VI,
Dubrovnik, Croatia;
01.10.2017
- 05.10.2017.
M. Bartosik, V. Moraes, H. Riedl, P.H. Mayrhofer:
"Thermo-mechanically optimized thin films";
Vortrag: Metallkunde Kolloquium Lech Arlberg,
Lech;
15.04.2015
- 17.04.2015.
M. Bartosik, J. Paulitsch, P.H. Mayrhofer:
"Synthesize-structure-properties Relations of AlN-based Protective coatings";
Vortrag: Materials Science & Technology 2014,
Pittsburgh, Pennsylvania USA (eingeladen);
12.10.2014
- 16.10.2014.
S. Baudis, S. Orman, A. Mautner, M. Schwentenwein, G. Russmüller, J. Stampfl, R. Liska:
"Biocompatible, tough photopolymers as 3D printed constructs for bone regeneration";
Poster: 1st TERMIS-EU WORKSHOP in collaboration with ISBF "3D Printing in Musculoskeletal Tissue Engineering",
Poland, Warsaw;
22.03.2018
- 23.03.2018.
S. Baudis, T. Pulka, B. Steyrer, H. Wilhelm, G. Weigel, H. Bergmeister, J. Stampfl, R. Liska:
"3D-printing of Urethane-based Photoelastomers for Vascular Tissue Regeneration";
Vortrag: MRS Fall Meeting 2009,
Boston, MA, USA;
30.11.2009
- 03.12.2009.
S. Baudis, Z. Tomasikova, X.H. Qin, P. Gruber, M. Markovic, J. Stampfl, A. Ovsianikov, R. Liska:
"Cell Encapsulation by Microfabrication with Hyaluronic Acid based Hydrogel Precursors";
Poster: International Conference on Biofabrication 2015,
Domplein 29, 3512 JE Utrecht;
07.11.2015
- 09.11.2015.
B. Bauer:
"Creep resistance depending on particle reinforcement of Al-Alloys";
Vortrag: Seminar "Heterogeneous Materials",
Wien;
04.03.2008
- 05.03.2008.
B. Bauer:
"Creep testing of particle reinforced Al-alloys";
Vortrag: 2nd Seminar on MODERN LIGHT METALS for doctoral students of Charles University Praha and University of Technology Vienna/IMST,
TU Wien;
11.01.2007
- 13.01.2007.
B. Bauer:
"News on characterisation of particle reinforced Al Alloys";
Vortrag: Seminar "Heterogeneous Materials",
Budapest;
22.05.2008
- 23.05.2008.
B. Bauer, G. Requena:
"Vergleich der Kriechbeständigkeit von partikelverstärkten Al-Matrix Verbundwerkstoffen";
Vortrag: 16. DGM-Symposium Verbundwerkstoffe und Werkstoffverbunde,
Bremen;
14.03.2007
- 16.03.2007.
B. Bauer, G. Requena, M. Lieblich:
"Enhancement of Creep Resistance of Al-Alloys by Particle Reinforcement";
Poster: Junioreuromat 2008,
Schweiz, Lausanne;
14.07.2008
- 17.07.2008.
B. Bauer, G. Requena, M. Lieblich:
"Erhöhung der Kriechbeständigkeit mit sinkender Partikelgröße von Al-Legierungen mit SiC-Partikel";
Vortrag: Metallkunde Kolloquium Lech Arlberg,
Lech;
14.04.2008
- 17.04.2008.
B. Bauer, G. Requena, M. Lieblich, H.P. Degischer:
"Creep resistance of Al-alloys reinforced with different SiC particle sizes";
Vortrag: TU Budapest,
Budapest;
22.05.2008
- 24.05.2008.
B. Bauer, G. Requena, M. Lieblich, H.P. Degischer:
"Kriechbeständigkeit von PM hergestellten Al-Legierungen in Abhängigkeit von der Größe der Verstärkungspartikel";
Vortrag: Kriechen von PM - PRMs,
Deutschland, Chemnitz (eingeladen);
11.12.2008.
S. Baumgartner:
"Ausbildung in Additiver Fertigung - von Universität bis Industrie";
Hauptvortrag: Austrian 3D-Printing Forum,
Wien (eingeladen);
22.10.2020.
S. Baumgartner:
"Development of a 3D-printing process for colored dental ceramics and selective modification of polymers";
Vortrag: ViCEM - Vienna Center for Engineering in Medicine Biennial Meeting 2019,
Wien;
14.11.2019
- 15.11.2019.
S. Baumgartner, R. Gmeiner, J. Stampfl:
"Stereolithography-based Additive Manufacturing of Dental Glass Ceramics";
Vortrag: Euromat 2019,
Stockholm;
01.09.2019
- 05.09.2019.
S. Baumgartner, M. Grubhofer, J. Stampfl:
"Nacre-like toughening of photopolymers";
Vortrag: Radtech Europe 2017: Conference and Exhibition,
Prag;
17.10.2017
- 19.10.2017.
S. Baumgartner, A. Ovsianikov, P. Gruber, M. Markovic, M. Oubaha, B. Duffy, J. Stampfl:
"High-Resolution Laser-Based 3D Printing of Organic-Inorganic Hybrids";
Poster: Polymer Processing Society Conference 2015,
Graz;
21.09.2015
- 25.09.2015.
S. Baumgartner, J.-A. Schönherr, A. Schedle, J. Stampfl:
"Lithography‐based Ceramic Manufacturing in Digital Dentistry";
Poster: 1st Vienna Polymer-Group Symposium,
Wien;
27.02.2018.
S. Baumgartner, J.-A. Schönherr, A. Schedle, J. Stampfl:
"Lithography-based Ceramic Manufacturing in Digital Dentistry";
Poster: ViCEM - Vienna Center for Engineering in Medicine Inaugural Meeting 2017,
Wien;
09.11.2017
- 10.11.2017.
S. Baumgartner, J. Stampfl:
"Additive Manufacturing of dental glass ceramics";
Vortrag: ViCEM - Vienna Center for Engineering in Medicine Biennial Meeting 2019,
Wien;
14.11.2019
- 15.11.2019.
S. Baumgartner, J. Stampfl:
"Digital Materials: A combination of Inkjet and Stereolithography";
Vortrag: TheIJC USA 2018,
Chicago;
12.04.2018
- 13.04.2018.
S. Baumgartner, J. Stampfl:
"Digital Materials: Selective modification of material properties";
Vortrag: Euromat 2019,
Stockholm;
01.09.2019
- 05.09.2019.
S. Baumgartner, J. Stampfl:
"Digital Toughening: Miming nacre-like structures via 3D-printing";
Vortrag: 5th Bioinspired Materials 2020,
Irsee/Online;
16.03.2020
- 19.03.2020.
S. Baumgartner, J. Stampfl:
"Nacre-inspired toughening of photopolymers by 3D-printing";
Vortrag: Bio-inspired Materials 2018,
Potsdam;
19.03.2018
- 22.03.2018.
S. Baumgartner, J. Stampfl et al.:
"Lithography based additive manufacturing of structural and functional ceramics";
Vortrag: 1st Vienna Polymer-Group Symposium,
Wien;
27.02.2018.
S. Beke, N. Babscan, H.P. Degischer:
"Model experiments on scillation assisted metal foaming";
Poster: MetFoam 2009,
Bratislava;
01.09.2009
- 04.09.2009.
S. Benedikt, K. Dietliker, H. Grützmacher, M. Markovic, N. Moszner, A. Ovsianikov, R. Liska:
"Characterization and Comparison of Next Generation Water-Soluble Photoinitiators";
Poster: International Conference on Biofabrication 2015,
Utrecht, Netherlands;
07.11.2015
- 09.11.2015.
D. Bomze, V. Schwarz, B. Husar, X.H. Qin, P. Gruber, A. Ovsianikov, J. Stampfl, R. Liska:
"Novel low-toxic PVA based hydrogel precursors for tissue engineering based on thiol-ene crosslinking";
Poster: P2M Winter School,
Zakopane;
13.01.2014
- 17.01.2014.
M. Bonta, S. Fröhlich, M. Hafner, E. Pittenauer, V. Archodoulaki, G. Allmaier, M. Marchetti-Deschmann:
"MALDI-RTOF mass spectrometric analysis of lipid compounds in synovial fluid separated by 2D thin layer chromatography";
Poster: 2nd Graz Lipid Mass Spec Meeting,
Graz;
06.03.2012
- 07.03.2012.
M. Bonta, S. Fröhlich, M. Hafner, E. Pittenauer, V. Archodoulaki, G. Allmaier, M. Marchetti-Deschmann:
"MALDI-RTOF-MS analysis of lipid compounds in synovial fluid separated by two-dimensional thin layer chromatography";
Vortrag: MassSpec-Forum-Vienna-2012,
Wien;
21.02.2012
- 22.02.2012.
M. Borchert, G. Mori, E. Kozeschnik, E. Povoden-Karadeniz, M. Bischof, A. Tomandl:
"Corrosion behavior influenced by quenching contitions of HTGN martensitic stainless steel";
Vortrag: 24th International Conference on Materials and Technology,
Portoroz;
28.09.2016
- 30.09.2016.
A.H. Bork, E. Povoden-Karadeniz, J.L.M. Rupp:
"Two-step thermochemical solar-to-fuel efficiency CALPHAD computation for strontium and chromium doped lanthanum manganite perovskite oxides";
Poster: Calphad XlV,
Awaji Island, Hyogo, Japan;
29.05.2016
- 03.06.2016.
A.H. Bork, E. Povoden-Karadeniz, S Schweiger, J.L.M. Rupp:
"Thermochemical solar to fuel conversion efficiency based on CALPHAD data for lanthanum manganite perovskites dobed with strontium and chromium";
Poster: 2016 MRS Spring Meeting & Exhibit,
Phoenix, Arizona;
28.03.2016
- 01.04.2016.
J. Buchinger, N. Koutná, Z. Chen, Z. Zhang, P.H. Mayrhofer, D. Holec, M. Bartosik:
"Toughness Enhanced Transition Metal Nitride Thin Films";
Vortrag: MSMF9,
Brno;
26.06.2019
- 28.06.2019.
J. Buchinger, N. Koutná, Z. Chen, Z. Zhang, P.H. Mayrhofer, D. Holec, M. Bartosik:
"Toughness Enhancement in Transition Metal Nitride Thin Film Superlattices";
Vortrag: Euromat 2019,
Stockholm;
01.09.2019
- 05.09.2019.
J. Buchinger, N. Koutná, P.H. Mayrhofer, D. Holec, M. Bartosik:
"TiN/WN Superlattice Coatings for Enhanced Toughness";
Poster: METAL 2018,
Brno;
23.05.2018
- 25.05.2018.
J. Buchinger, N. Koutná, P.H. Mayrhofer, D. Holec, M. Bartosik:
"Toughness Enhancement in Superlattice TiN/WN Coatings";
Vortrag: Materials Science and Engineering - MSE 2018,
Darmstadt;
26.09.2018
- 28.09.2018.
K. Bugelnig, H. Germann, T. Steffens, F. Wilde, E. Boller, G. Requena:
"Damage mechanisms and evolution during thermomechanical fatigue of cast near eutectic Al-Si piston alloys";
Poster: EUROMAT 2017,
THESSALONIKI;
17.09.2017
- 22.09.2017.
H. Buken, E. Kozeschnik:
"Modelling the thermo-mechanical processing of micro-alloyed steel";
Vortrag: EUROMAT 2017,
THESSALONIKI;
17.09.2017
- 22.09.2017.
H. Buken, E. Kozeschnik:
"Recrystallization in Al- Mg alloys - A new modelling approach";
Hauptvortrag: Metaldeform 2017,
Samara, Russland (eingeladen);
04.07.2017
- 07.07.2017.
H. Buken, E. Kozeschnik:
"State parameter-based modelling of microstructure evolution in micro-alloyed steel during hot forming";
Hauptvortrag: Workshop des COMET-K2 Kompetenzzentrums MPPE,
Leoben (eingeladen);
03.11.2015
- 05.11.2015.
H. Buken, J. Svoboda, E. Kozeschnik:
"A Multi-class Approach for the Description of Static and Dynamic Recrystallization in Steel";
Vortrag: 6th International Conference on Recrystallization and Grain Growth,
Pittsburgh;
17.07.2016
- 21.07.2016.
P Burgholzer, C Hofer, B Reitinger, A. Mohammed, H.P. Degischer, D Loidl, P. Schulz, R. Nuster, G. Paltauf:
"Laser ultrasonics for non-contact determination of material properties of continous fiber reinforced or layered materials";
Vortrag: 9th European NDT Conference (ECNDT) to DGZfP,
Berlin;
25.09.2006
- 29.09.2006.
D. Burzic:
"Oxidation and decarburisation of high Si-steels";
Vortrag: Seminar Research in progress on metallic materials,
Bratislava;
02.10.2008
- 03.10.2008.
D. Burzic, H. Schröttner, B. Chernev, E. Kozeschnik:
"Characterization of Oxide Scale Formation on High Silicon Spring Steel";
Vortrag: Materials Science and Engineering - MSE 2008,
Nürnberg;
01.04.2008
- 04.04.2008.
D. Burzic, J. Zamberger, E. Kozeschnik:
"Nondestructive Evaluation of the Decarburization Depth of Spring Steel with Electromagnetic Measurement Methods";
Vortrag: Materials Science & Technology 2009,
Pittsburgh (USA);
25.10.2009
- 29.10.2009.
B. Busetti, S. Baumgartner, W. Steiger, J. Stampfl:
"DLP versus Laser";
Vortrag: AM Ceramics,
Wien;
11.09.2017
- 12.09.2017.
B. Busetti, J. Stampfl:
"DLP + Laser: A throughput improved lithography based Additive Manufacturing Technologies (AMT) system with hybrid exposure concept";
Vortrag: 12th International Symposium on Emerging and Industrial Texas Instruments DLP® Technology Applications,
Hanau;
09.11.2017.
B. Busetti, J. Stampfl:
"Kalibrierung des Arbeitsfeldes für ein 3D-Drucksystem";
Vortrag: Kalibrierung des 2D- und 3D-Arbeitsfeldes von Laser-Scan-Systemen,
Nürnberg;
31.05.2017.
B. Busetti, B. Steyrer, J. Stampfl:
"Toolless Manufacturing of Complex Structures";
Poster: Vienna Polymer-Group Symposium,
Universität Wien;
21.02.2018.
D. Canelo Yubero, C. Poletti, F. Warchomicka, G. Requena:
"Load partitioning and microstructural evolution in Ti-alloys during hot tensile tests";
Poster: Symposium: "Research at European Neutron and Synchrotron facilities by Austrian researchers",
Wien;
11.11.2013
- 12.11.2013.
D. Canelo Yubero, G. Requena, C. Poletti, F. Warchomicka, H.P. Degischer:
"Load partition and microstructural evolution during hot deformation of Ti-alloys";
Vortrag: Metallkunde Kolloquium Lech Arlberg,
Lech;
11.04.2011
- 13.04.2011.
D. Canelo Yubero, G. Requena, C. Poletti, F. Warchomicka, H.P. Degischer, J. Daniels:
"Load partitioning between the phases in Ti-alloys";
Vortrag: 5th Seminar for PhD students "Research in progress on metallic materials",
Graz;
08.11.2010
- 09.11.2010.
T. Ceglar, M. Schwab, A. Wagner, H. E. Pettermann:
"Nonlinear Multi-Scale Simulations of Fabric Laminate Components";
Vortrag: ECCOMAS Thematic Conference on Computational Modeling of Complex Materials Across the Scales,
Paris;
07.11.2017
- 09.11.2017.
F. Chalupa-Gantner, M. Woletz, S. Mohammadi, Z. Nagy, C. Windischberger, A. Ovsianikov:
"Large-Volume 2PP Structures as Ground Truth Phantoms for Diffusion-Weighted Magnetic Resonance Imaging";
Vortrag: EUROMAT 2021,
Graz;
13.09.2021
- 17.09.2021.
K. Cicha, Z. Li, K. Stadlmann, J. Torgersen, R. Markut-Kohl, R. Liska, J. Stampfl:
"Fabrication and evaluation of 3D-micro-structures produced using two-photon-induced photopolymerization (TPIP or 2PP) by means of optical assessment and FTIR-spectroscopy";
Vortrag: 16. Tagung Festkörperanalytik,
Wien;
04.07.2011
- 06.07.2011.
D. Cirstea, E. Kozeschnik, P Lang, E. Povoden-Karadeniz:
"Calphad-based thermokinetics of precipitation in ti-ni shape memory alloys";
Poster: MSE 2016,
Darmstadt;
26.09.2016
- 29.09.2016.
S. Corkovic, A. Pyzalla, B. Hasse, T. Wroblewski:
"Microstructure of Rat Teeth";
Poster: Hasylab User Meeting,
Hamburg;
31.01.2003.
E. Cornelis, A. Kottar, H.P. Degischer:
"Microtomographic investigation of Ti-rich particles in foamed aluminium";
Poster: Symposium Cellular Metals and Polymers,
Fürth (Deutschland);
12.10.2004
- 14.10.2004.
P. Cornuault, C. Verdu, E. Maire, D. Tolnai, H.P. Degischer:
"Structural and local mechanical characterization of A 25MNCRSIV5 forged steel: Anisotropy due to MNS inclusions";
Vortrag: EUROMAT 2009,
Glasgow;
07.09.2009
- 10.09.2009.
J. Crespo Casanova:
"In-situ Tensile Test of Nodular Cast-Iron GJS700 at ID15 (ERSF)";
Vortrag: 3rd Scientia Materiarum Symposium,
San Sebastián (eingeladen);
21.10.2009
- 23.10.2009.
C. Czernin, S. Zellhofer, H.P. Degischer:
"Aufschäumen von Aluminium in komplexen Formen";
Poster: Symposium Cellular Metals and Polymers,
Fürth (Deutschland);
12.10.2004
- 14.10.2004.
C. Czernin, S. Zellhofer, G. Kern, H.P. Degischer:
"Artistic statue of foamed aluminum";
Poster: MetFoam 2009,
Bratislava;
01.09.2009
- 04.09.2009.
V. Dalbauer, A Kirnbauer, J. Ramm, S. Kolozsvári, C.M. Koller, P.H. Mayrhofer:
"Phase formation and oxidation behaviour of cathodic arc evaporated Al1-x-yCrxFe{y} and Al1-x-yCrxFe{y}Oδ thin films";
Vortrag: EUROMAT 2017,
THESSALONIKI;
17.09.2017
- 22.09.2017.
V. Dalbauer, J. Ramm, S. Kolozsvári, C.M. Koller, P.H. Mayrhofer:
"Phase formation and oxidation behaviour of cathodic arc evaporated AlxCr1-x and AlxCr1-xOδ thin films";
Poster: EMRS Spring Meeting 2017,
Straßburg;
22.05.2017
- 26.05.2017.
A. Danninger, A. Kottar:
"Mechanische Prüfung von zellulären Werkstoffen am Institut für Werkstoffwissenschaft und Werkstofftechnologie";
Vortrag: 1. Arbeitsgruppentreffen Normung Druckversuch für Zellulare Metalle,
Universität Siegen, Germany (eingeladen);
30.11.2005.
H.P. Degischer:
"3D-Strukturen in mehrphasigen Legierung";
Vortrag: 11. Werkstofftagung TU Graz,
TU Graz, Institut für Werkstoffkunde und Schweißtechnik (eingeladen);
05.05.2011.
H.P. Degischer:
"Al/Cu MMCs reinforced with Diamonds";
Vortrag: Extremat, Thun,
Thun/ Schweiz;
07.05.2007
- 09.05.2007.
H.P. Degischer:
"Attraktivität der Eigenschaftsprofile von Metallmatrix-Nanoverbundwerkstoffe";
Vortrag: Sitzung des ASMET-Fachausschusses für MMC-Verbunde und zellulare Metalle,
Graz;
13.10.2010.
H.P. Degischer:
"Ausscheidungskinetik in Al-Si-Legierungen und Matrixverbundwerkstoffen";
Vortrag: EADS Deutschland,
München (eingeladen);
18.08.2005.
H.P. Degischer:
"Caracterizacion de materiales estructurales";
Vortrag: Austrian Cuban School on Material Science,
Havanna - Kuba (eingeladen);
18.11.2009
- 21.11.2009.
H.P. Degischer:
"Evaluation of critical defects and structures by insitu and high resolution tomography";
Vortrag: Industrielle Computertomografie Tagung,
Wels;
28.09.2010.
H.P. Degischer:
"Heterogenitäten in Metallischen Gußstrukturen";
Vortrag: Projektmeeting Voestalpine,
Linz;
18.05.2009.
H.P. Degischer:
"Heterogenitäten in Metallischen Gußstrukturen";
Vortrag: Projektmeeting Georg Fischer ++,
Herzogenburg;
05.06.2009.
H.P. Degischer:
"Hot compression of Ti alloys and influence of discontinuous reinforcements";
Vortrag: Ecole Nationale Supérieur des Mines, Séminaires du Centre SMS,
Saint-Etienne;
07.04.2006.
H.P. Degischer:
"Metallische Werkstoffe und Werkstoffauswahl";
Vortrag: Weiterbildungskurs am BFI-Tirol,
Innsbruck;
17.02.2009.
H.P. Degischer:
"Morphology of eutectic structures in Al-alloys";
Vortrag: HETMAT Seminar,
Le Castelet (eingeladen);
27.03.2006
- 28.03.2006.
H.P. Degischer:
"Multiscale Tomographies Of Heterogeneous Metals";
Vortrag: Seminar Laboratoire SIMAP,
Grenoble, France;
26.11.2008.
H.P. Degischer:
"Non-destructive testing and defect evaluation in engineering materials";
Vortrag: Industrielle Computertomografie Tagung,
Wels;
28.09.2010.
H.P. Degischer:
"Opportunities of Metal Matrix Composites for Transport Application";
Vortrag: Symposium "Light Metals for Future Vehicle Concepts" (Helmholz-Zentrum Geesthacht),
Hamburg (eingeladen);
18.10.2013.
H.P. Degischer:
"Precipitation kinetics and spheroidisation of Si in AlSi alloys";
Vortrag: Journees de "Genese des microstructures-thermodynamique et cinetique" de FEDERAMS,
INSA-Lyon (eingeladen);
13.07.2005.
H.P. Degischer:
"Reinforcement of Al-Foams and Metallic Cellular Structures";
Vortrag: Syntactic and Composite Foams,
Banff (Canada) (eingeladen);
01.08.2004
- 05.08.2004.
H.P. Degischer:
"Size scales in the micro-structure of metalic structural materials";
Vortrag: Materials Science in the age of nano,
Havanna - Kuba (eingeladen);
23.11.2009
- 28.11.2009.
H.P. Degischer:
"Thermische Ausdehnung, innere Spannungen und Porenverteilung in AlSiCp Metallmatrixverbundwerkstoffe";
Vortrag: 16. DGM-Symposium Verbundwerkstoffe und Werkstoffverbunde,
Bremen/ Deutschland;
14.03.2007
- 16.03.2007.
H.P. Degischer:
"Tomographie Investigations of IMST";
Vortrag: Sitzung des Arbeitskreises Tomographie im Fachausschuss Materialographie der DGM,
Wien;
29.02.2008.
H.P. Degischer:
"Verformung von Zugproben aus Alulight AlSi10 bis zur Rissbildung";
Vortrag: Sitzung des DGM-Fachausschusses "Metallische Verbundwerkstoffe und zellulare Metalle",
Köln;
05.05.2008
- 06.05.2008.
H.P. Degischer:
"Verstärkung von Al-Profilen mit Kohlenstofffasern";
Vortrag: Workshop Fa. THÖNI Automotive Components GmbH,
Telfs;
10.07.2009.
H.P. Degischer:
"Werkstoffangebot";
Vortrag: ASMET Seminar Leichtbau,
Wien;
24.09.2009
- 25.09.2009.
H.P. Degischer:
"Werkstoffwissenschaftliche Expertise und Methoden des Institutes für Werkstoffwissenschaft und Werktofftechnologie der TU Wien";
Vortrag: LKR Fachrunde,
Leichtmetallkompetenzzentrum Ranshofen (eingeladen);
10.05.2005.
H.P. Degischer:
"Zerstörungsfreie Prüfung und Bewertung kritischer Fehlergrößen in Werkstoffen";
Vortrag: Eröffnung des K-Projektes "Zerstörungsfreie Prüfung und Tomografie",
Wels;
04.02.2010.
H.P. Degischer:
"Zerstörungsfreie Prüfung und Bewertung kritischer Fehlergrößen in Werkstoffen";
Vortrag: Board-Meeting HPD "Heterogenities in metallic cast structures",
Wels;
04.02.2010.
H.P. Degischer, E. Cornelis, A. Kottar, A. Mohammed:
"Röntgen-Compter-Tomografie der Kohlenstrofffaserverteilung in Leichtmetallmatrix-Verbundwerkstoffen";
Poster: 14. DGM Symposium Verbundwerkstoffe und Werkstoffverbunde,
Wien;
02.07.2003
- 04.07.2003.
H.P. Degischer, A. Falahati, G. Requena, H. Mohammadian:
"Precipitation Kinetics in Al-Alloys Revealed by Dilatometry";
Vortrag: Materials Science and Engineering - MSE 2008,
Nürnberg;
01.09.2008
- 04.09.2008.
H.P. Degischer, T. Huber:
"Thermal expansion of Al-SiC composites";
Vortrag: Seminar on "Modern Light Metals",
Charles University Prague;
04.03.2004
- 05.03.2004.
H.P. Degischer, A. Kottar:
"Computertomografie an zellulären Metallen und Verbundwerkstoffen";
Vortrag: Erster industrieller Computertomograf Österreichs,
Fachhochschule Wels (eingeladen);
01.12.2004.
H.P. Degischer, A. Kottar:
"Mikroradiographie und Röntgen-Computer-Tomographie an heterogenen Werkstoffen";
Vortrag: HITRANS Netzwerksprojekt Rissprüfung, ARC systems research GmbH,
Wien (Österreich) (eingeladen);
06.04.2005.
H.P. Degischer, A. Kottar, B. Foroughi:
"Tensile deformation and cracking sequence of foamed AlSi10 with skin";
Vortrag: Metfoam 2007 / Canada,
Montreal/ Canada;
05.09.2007
- 07.09.2007.
H.P. Degischer, A. Kottar, B. Foroughi, E. Maire, N. Godin, V. Carmona, S. Deschanel, F. Simancik:
"Tensile deformation and cracking sequence of foamed AlSi10 with skin";
Vortrag: HETMAT Seminar,
Wien;
06.03.2008
- 07.03.2008.
H.P. Degischer, B. Kriszt, A. Kottar, C. Kolbeck, S. Figoritz, W. Pelze:
"Open-all iron based cellular material";
Vortrag: Cellular Metals,
Miskolc, H;
18.10.2003.
H.P. Degischer, F. Lasagni:
"3D-Visualisation of Phases in cast AlMg5Si8 alloy";
Vortrag: CENIM,
Madrid;
28.01.2008.
H.P. Degischer, F. Lasagni:
"3D-visualisation of the phases in cast Al-Mg-Si alloys";
Vortrag: Indian Institute of Science and Technology, Bangalore,
Bangalore, India (eingeladen);
30.10.2007.
H.P. Degischer, C. Poletti:
"Seleccion de materiales de ingeneria";
Vortrag: Austrian Cuban School on Material Science,
Havanna - Kuba (eingeladen);
18.11.2009
- 21.11.2009.
H.P. Degischer, G. Requena, M. Schöbel, D. Tolnai, B. Harrer, A. Kottar, B. Foroughi, F. Lasagni, Z. Asghar, F. Warchomicka, M. Hochegger, G. Fiedler, W. Altendorfer:
"Tomographic methods revealing the three-dimensional structure of materials";
Hauptvortrag: Materials Science and Engineering - MSE 2008,
Nürnberg, Deutschland (eingeladen);
01.09.2008
- 04.09.2008.
H.P. Degischer, M. Schöbel, H. J. Böhm, S. Nogales, C. Edtmaier:
"MMC-characterisation and Modelling";
Vortrag: Extremat-Meeting,
Saclay;
20.10.2008
- 22.10.2008.
H.P. Degischer, D. Tolnai, F. Lasagni, E. Boller:
"Multi-scale tomography of the phases in a cast AlSi8Mg5 alloy";
Vortrag: 1st Conference on 3D-Imaging of Materials and Systems 2008,
Carcans-Maubuisson - near Bordeaux;
08.09.2008
- 12.09.2008.
S. Dépinoy, C. Toffolon-Masclet, A. Gourgues-Lorenzon, E. Kozeschnik:
"Experimental determination and modeling of Austenite grain growth in 2.25 Cr-1Mo steel";
Poster: Calphad XlII,
San Sebastian, Spanien;
26.05.2013
- 31.05.2013.
S. Dépinoy, C. Toffolon-Masclet, A. Gourgues-Lorenzon, E. Kozeschnik, B. Marini, F. Roch:
"Experimental determination and modeling of carbide precipitation sequences in a 2.25Cr - 1Mo bainitic steel during tempering";
Vortrag: TMS 2015,
Orlando, Florida;
15.05.2015
- 19.05.2015.
S. Dépinoy, C. Toffolon-Masclet, A. Gourgues-Lorenzon, E. Kozeschnik, B. Marini, F. Roch:
"Experimental study and thermokinetic modelling of carbides precipitation sequences in 2,25Cr-1Mo bainitic steel";
Vortrag: THERMEC´2016,
Graz (eingeladen);
29.05.2016
- 03.06.2016.
M. Dikovits, C. Poletti, F. Warchomicka:
"Hot deformation and processing maps of a β-Ti alloy";
Poster: Euromat 2011,
Montpellier;
12.09.2011
- 15.09.2011.
A. Dobos:
"Directed cell growth and alignment in 3D printed hydrogels";
Vortrag: ViCEM - Vienna Center for Engineering in Medicine Inaugural Meeting 2017,
Wien;
09.11.2017
- 10.11.2017.
P. Dorfinger, R. Liska, J. Stampfl:
"Toughening of Photopolymers for Stereolithography (SL)";
Vortrag: Polymer Processing Society Conference 2015,
Graz;
21.09.2015
- 25.09.2015.
B. Duscher, A. Laska, A. Örs Ünsal, V. Archodoulaki:
"Structural Modification of Conventional and Crosslinked PE-UHMW Acetabular Liners due to in vivo Time and Load";
Vortrag: FBPS '15 - 11th Symposium on Frontiers in Biomedical Polymers,
Riva del Garda, Idataly;
08.07.2015
- 11.07.2015.
B. Duscher, A. Zisser, F. Kamleitner, T. Koch, V. Archodoulaki:
"Evaluation of stabilizer and additive content of post-consumer-polypropylene waste and their influence on new concepts of polypropylene-upcycling";
Poster: Polymer Processing Society Conference 2015,
Graz;
21.09.2015
- 25.09.2015.
N. Eder:
"Bauschinger effect in high strength steels. How to determine residual stresses?";
Vortrag: Seminar "Heterogeneous Materials",
Budapest;
22.05.2008
- 23.05.2008.
Gaku Eguchi, A. Hariki, M. Ikeda, P. Tomes, N. Barisic, J. Kunes, M. Baitinger, H. Nguyen, M. Mihalkovic, P. Popcevic, A. Smontara, C. Allio, C. Krellner, P. Lory, M. Boissieu, S. Pailhès, V. Giordano, H. Euchner, Y. Grin, S. Paschen:
"Pronounced transport anisotropy in the type-I clathrate Ba8Au6-xGe40+x";
Vortrag: 17th European Conference on Thermoelectrics,
Limassol, Cyprus;
23.09.2019
- 25.09.2019.
P. Estermann:
"Necessity is the Mother of Invention: Creative Approaches with a 40 year old Gleeble to Better Understand Continuous Casting of Steel";
Vortrag: Gleeble Webinar Series, Episode 44,
Online (eingeladen);
23.09.2021.
P. Estermann, Y.V. Shan, E. Kozeschnik:
"Modelling grain boundary segregation in polycrystalline materials";
Vortrag: THERMEC 2021,
Online;
10.05.2021
- 14.05.2021.
H. Euchner, P.H. Mayrhofer, J. Paulitsch:
"A computational approach to designing boron based coatings";
Vortrag: 41st International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego, CA;
28.04.2014
- 02.05.2014.
A. Falahati:
"Ageing of Cu containing Cr-Steels";
Vortrag: Seminar "Heterogeneous Materials",
Budapest;
22.05.2008
- 23.05.2008.
A. Falahati:
"Volume change of Si-containing Al-alloys during ageing";
Vortrag: 2nd Seminar on MODERN LIGHT METALS for doctoral students of Charles University Praha and University of Technology Vienna/IMST,
TU Wien;
11.01.2007
- 13.01.2007.
A. Falahati, P. Lang, M.R. Ahmadi, A. Danninger, E. Kozeschnik:
"Influence of Natural Aging and Pre-deformation on Precipitation Kinetics and Tensile Properties of Artificially Aged Al-Mg-Si-(Cu) Alloys";
Vortrag: 6th international Light Metals Technology Conference (LMT 2013),
Old Windsor, UK;
24.07.2013
- 26.07.2013.
A. Falahati, J. Wu, P. Lang, M.R. Ahmadi, E. Povoden-Karadeniz, E. Kozeschnik:
"Assessment of parameters for precipitation simulation of heat treatable aluminum alloys using differential scanning calorimetry";
Vortrag: The first Asian Conference on Aluminum Alloys (ACAA-2013),
Beijing, China (eingeladen);
13.10.2013
- 17.10.2013.
R. Fernández Gutiérrez:
"Thermomechanical characterization of cast Al-alloys for cylinder heads";
Vortrag: 7th Seminar for Central European PhD Students,
Trnava;
15.11.2012
- 16.11.2012.
R. Fernández Gutiérrez, G. Requena, B. Stauder, E. Maire, A. Isaac:
"3D-CHARACTERIZATION OF AlCu4.5Mg0.3 AND AlCu7 ALLOYS";
Poster: Symposium: "Research at European Neutron and Synchrotron facilities by Austrian researchers",
Wien;
11.11.2013
- 12.11.2013.
R. Fernández Gutiérrez, G. Requena, B. Stauder, E. Maire, A. Isaac, E. Boller, M. Scheel, I. Manke:
"3D-CHARACTERIZATION OF AlCu4.5Mg0.3 AND AlCu7 ALLOYS";
Vortrag: 1st International Conference on Tomography and Materials and Structures,
Ghent;
01.07.2013
- 05.07.2013.
R. Fernández Gutiérrez, G. Requena, B. Stauder, E. Maire, A. Isaac, M. Scheel, I. Manke:
"3D-CHARACTERIZATION OF AlCu4.5Mg0.3 AND AlCu7 ALLOYS";
Vortrag: Aluminium 2000 World Congress,
Mailand;
14.05.2013
- 18.05.2013.
R. Fernández Gutiérrez, G. Requena, B. Stauder, F. Sket, E. Maire, A. Isaac, M. Scheel, E. Boller, I. Manke:
"3D-Characterization of AlCu4.5Mg0.3 and AlCu7 alloys after solution heat treatment and during in situ tensile tests";
Vortrag: EUROMAT 2013,
Sevilla;
08.09.2013
- 13.09.2013.
R. Ferreyro, A. Pyzalla, Nina Cernohlawek, C. Jokubonis, C. Streli, P. Wobrauschek, M. Sander:
"Determination of the Element Distribution in Sauropod Bones By Micro-XRF";
Poster: 54th Denver X-ray Conference,
Denver (USA);
01.08.2005
- 05.08.2005.
R. Ferreyro, M. Stempniewicz, M. Sander, S. Weiss, A. Denker, G. Goerigk, C. Streli, P. Wobrauschek, A. Pyzalla:
"Untersuchung von Sauropodenknochen mit Elektronenmiskroskopie, PIXE und Synchrotronstrahlung";
Vortrag: Jahrestreffen der DFG-Forschergruppe Sauropoden, Museum für Naturkunde der Humboldt-Unversität,
Bonn;
15.11.2004.
H. Fillunger, R. Maix, A. Danninger:
"Axial Compression Test on ITER-TFMC Conductors at Room Temperature";
Poster: SOFT 2008,
Rostock, Deutschland;
15.09.2008
- 19.09.2008.
F.D. Fischer, E. Kozeschnik, G. Mori, J. Svoboda:
"Hydrogen diffusion in pipe(line) steels revisited";
Vortrag: 59. Metallkunde-Kolloquium,
Lech am Arlberg;
15.04.2013
- 17.04.2013.
F.D. Fischer, E. Kozeschnik, G. Mori, J. Svoboda:
"The influence of traps on the diffusion of interstitial";
Vortrag: Colloquium Material Modelling IMWF,
Stuttgart;
22.05.2014.
B. Foroughi, A. Kottar, H.P. Degischer:
"Simulation of deformation and damage of non-uniform cellular aluminium";
Vortrag: MetFoam 2009,
Bratislava;
01.09.2009
- 04.09.2009.
W. Fragner, H. Antrekowitsch, E. Kozeschnik, G. Mori, S Pogatscher, C. Sommitsch, P.J. Uggowitzer:
"Multi-institutional collaboration of industry and university along the processing chain as a means to holistically optimize material characteristics of aluminum products";
Vortrag: THERMEC´2016,
Graz (eingeladen);
29.05.2016
- 03.06.2016.
C. Fritscher:
"Sol-Gel-Synthese: ein Weg zu bioinspirierten Materialien";
Vortrag: 1. Wiener Biomaterialsymposium,
Wien;
04.11.2004
- 05.11.2004.
C. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"Fabrication of bio-inspired ceramic composites";
Poster: Junior Euromat 2004,
Lausanne, Switzerland;
06.09.2004
- 09.09.2004.
C. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"Fabrication of bio-inspired ceramic composites";
Poster: Micro-mechanical properties of biomaterials, ECI-Conference,
Tomar, Portugal;
26.09.2004
- 30.09.2004.
Ch. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"Fabrication of bio-inspired ceramic composites";
Poster: Micro-Mechanical Properties of Biomaterials,
Tomar, Portugal;
26.09.2004
- 30.09.2004.
S. Fröhlich, E. Claude, M. Kennedy, V. Archodoulaki, G. Allmaier, M. Marchetti-Deschmann:
"Correlating UHMW-PE cross-linking with biomolecular induced material modifications by means of MALDI-RTOF imaging mass spectrometry";
Poster: Ourence Conference on Imaging Mass Spectrometry,
Ourence, Spain;
03.09.2012
- 05.09.2012.
S. Fröhlich, M. Kennedy, V. Archodoulaki, G. Allmaier, M. Marchetti-Deschmann:
"Correlating UHMW-PE degradation and modification with biomolecular adsorption by means of MALDI imaging mass spectrometry";
Poster: 5th Vienna Biomaterialsymposium,
Wien;
19.11.2012
- 21.11.2012.
S. Fröhlich, T. Luider, V. Archodoulaki, G. Allmaier, M. Marchetti-Deschmann:
"MALDI-TOF mass spectrometry imaging - A tool to investigate time-dependent biomolecule adsorption in correlation to induced polymer changes on UHMW-PE hip joints";
Vortrag: 5th Vienna Biomaterialsymposium,
Vienna;
19.11.2012
- 21.11.2012.
S. Fröhlich, R. Markut-Kohl, V. Archodoulaki, D. Kerjaschki, G. Allmaier, M. Marchetti-Deschmann:
"UHMWPE joint implants - investigating simulated synovial compound adsorption by MALDI imaging mass spectrometry";
Vortrag: 9th Austrian Proteomics Research Symposium - Special focus on clinical proteomics,
Wien (eingeladen);
08.11.2011
- 09.11.2011.
S. Fröhlich, S. Schrottshammer, E. Claude, M. Kennedy, V. Archodoulaki, G. Allmaier, M. Marchetti-Deschmann:
"Time dependent in vitro adsorption of synovial compounds on ultra-high molecular weight polyethylene investigated by MALDI imaging mass spectrometry";
Poster: 10th Austrian Proteomic Research Symposium,
Graz;
24.09.2012
- 26.09.2012.
C. Fuger, R Hahn, T. Wojcik, O Hunold, P. Polcik, P. Felfer, P.H. Mayrhofer, H. Riedl:
"Ternary transition metal diborides - Next generation protective coating materials";
Hauptvortrag: 17th International Conference on Plasma Surface Engineering,
Erfurt, Deutschland (eingeladen);
07.09.2020
- 10.09.2020.
C. Fuger, A. Hirle, R Hahn, M. Arndt, O Hunold, S. Kolozsvári, P. Polcik, H. Riedl:
"Structure related investigations and fracture resistance of TiMoB2 thin films";
Vortrag: AVS 67 Virtual Symposium,
Charlotte;
25.10.2021
- 28.10.2021.
C. Fuger, D. Holec, H. Bolvardi, H. Riedl:
"Fracture resistance characterized by bonding nature via ab initio calculations";
Poster: 47th International Conference on Metallurgical Coatings and Thin Films, ICMCTF,
San Diego (USA);
26.04.2021
- 30.04.2021.
C. Fuger, V. Moraes, R Hahn, H. Bolvardi, P. Polcik, P.H. Mayrhofer, H. Riedl:
"Thermomechanical properties and oxidation resistance of ternary W1-xTaxB2-z coatings";
Vortrag: 47th International Conference on Metallurgical Coatings and Thin Films, ICMCTF,
San Diego (USA);
26.04.2021
- 30.04.2021.
C. Fuger, V. Moraes, R Hahn, H. Bolvardi, P. Polcik, H. Riedl, P.H. Mayrhofer:
"Influence of Ta on phase stability and mechanical properties of WB 2 thin films";
Vortrag: EMRS Spring Meeting 2019,
Nizza;
27.05.2019
- 31.05.2019.
C. Fuger, V. Moraes, R Hahn, O Hunold, M. Arndt, P. Polcik, P.H. Mayrhofer, H. Riedl:
"Thermomechanical Properties and Oxidation Resistance of Ternary W1-xTaxB2-z coatings";
Vortrag: ÖGV- Seminar 2021,
Wien;
24.09.2021.
C. Fuger, V. Moraes, R Hahn, P. Polcik, H. Bolvardi, H. Riedl, P.H. Mayrhofer:
"Influence of Ta on phase stability and mechanical properties of WB 2 thin films";
Vortrag: Vienna young Scientists Symposium VSS 2019,
Wien;
13.06.2019
- 14.06.2019.
C. Fuger, B Schwartz, T. Wojcik, V. Moraes, M. Weiss, A. Limbeck, C Macauley, O Hunold, P. Polcik, D. Primetzhofer, P. Felfer, P.H. Mayrhofer, H. Riedl:
"Oxidation resistance of Ta doped WB2-z coatings";
Poster: 17th International Conference on Plasma Surface Engineering,
Erfurt, Deutschland;
07.09.2020
- 10.09.2020.
C. Fuger, B Schwartz, T. Wojcik, V. Moraes, M. Weiss, C Macauley, O Hunold, P. Polcik, D. Primetzhofer, P. Felfer, P.H. Mayrhofer, H. Riedl:
"Influence of Ta on the oxidation resistance of WB2-z coatings";
Poster: AVS 2020 International Twitter Poster Competition,
Twitter;
06.07.2020.
S. Gäbler, T. Koch, J. Stampfl, S. Seidler, C. Heller, S. Baudis, R. Liska, R. Weidisch:
"Determination of the Viscoelastic Properties of Hydrogels based on Polyethylene Glycol Diacrylate (PEG-DA)";
Poster: Materials Science and Engineering - MSE 2008,
Nürnberg;
01.09.2008
- 04.09.2008.
F. Gantner, M. Woletz, B. Hager, Z. Nagy, C. Windischberger, A. Ovsianikov, S. Mohammadi:
"High-Volume 2PP Structures as Ground Truth Phantoms for Diffusion Magnetic Resonance Imaging";
Vortrag: 21st International Symposium on Laser Precision Microfabrication 2020,
Dresden;
23.06.2020
- 26.06.2020.
J. Garcia:
"ADEMAT Network: von der Projektidee zum fertigen EU-Projektantrag";
Vortrag: Auslandsbürotagung 2002,
Wien;
05.09.2002.
J. Garcia:
"ALFA II Ademat Network - Projektpräsentation";
Vortrag: EU-Lateinamerika Hochschultag,
Wien;
15.05.2003.
J. Garcia:
"Entwicklung des Forschungsnetzwerkes EDUMAT";
Vortrag: Jahrestagung der ARGE: Österreichische Lateinamerika-Forschung,
Strobl (A);
24.05.2002.
J. Garcia:
"Formation of functionally graded surfaces in (Ti,W)(C,N)-Co based cutting tools";
Vortrag: Il Jornadas Internacionales de Ingenieria de Superficie - JIFI 2002,
Caracas, Venezuela;
25.11.2002
- 29.11.2002.
S.A. Glatz, H. Bolvardi, S. Koloszvári, C.M. Koller, H. Riedl, P.H. Mayrhofer:
"Arc evaporated W-alloyed Ti-Al-N coatings for improved thermal stability, mechanical, and tribological properties";
Poster: Plansee Seminar 2017,
Reutte;
29.05.2017
- 02.06.2017.
S.A. Glatz, H. Bolvardi, S. Kolozsvári, C.M. Koller, H. Riedl, P.H. Mayrhofer:
"Arc evaporated Mo- and W-alloyed Ti-Al-N hard coatings for improved high temperature (wear) performance in (metal-) machining industry";
Vortrag: XI. Seminar for CE PhD Students in Materials Science,
TU Wien;
09.11.2017
- 10.11.2017.
S.A. Glatz, H. Bolvardi, S. Kolozsvári, C.M. Koller, H. Riedl, P.H. Mayrhofer:
"Arc evaporated W-alloyed Ti-Al-N coatings for improved thermal stability, mechanical, and tribological properties";
Poster: 44th International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego;
18.04.2017
- 23.04.2017.
T. Glechner, E. Aschauer, R Hahn, D. Holec, J. Ramm, S. Kolozsvári, H. Riedl:
"Enhancing the oxidation resistance of period VI carbides and borides: A joint theoretical and experimental study";
Poster: 47th International Conference on Metallurgical Coatings and Thin Films, ICMCTF,
San Diego (USA);
26.04.2021
- 30.04.2021.
T. Glechner, S. Fritze, E. Lewin, V. Paneta, D. Primetzhofer, S. Kolozsvári, D. Holec, P.H. Mayrhofer, H. Riedl:
"Novel ultra-high temperature Ta-C and Ta-C-N coatings: From ab initio calculations to PVD depositions";
Vortrag: 2017 MRS Fall Meeting,
Boston;
26.11.2017
- 01.12.2017.
T. Glechner, S. Fritze, E. Lewin, V. Paneta, D. Primetzhofer, S. Kolozsvári, D. Holec, P.H. Mayrhofer, H. Riedl:
"Novel ultra-high temperature Ta-C and Ta-C-N coatings: From ab initio calculations to PVD depositions";
Vortrag: 64. Metallkunde Kolloquium,
Lech am Arlberg;
18.04.2017
- 21.04.2017.
T. Glechner, R Hahn, A. Bahr, T. Wojcik, M. Weiss, J. Ramm, O Hunold, S. Kolozsvári, H. Riedl:
"Alloying of period VI transition metal boride-based coatings for ultra-high temperature oxidation protection";
Vortrag: AVS 67 Virtual Symposium,
Charlotte;
25.10.2021
- 28.10.2021.
T. Glechner, R Hahn, D. Primetzhofer, H Zaid, S. Kodambaka, D. Holec, P.H. Mayrhofer, S. Kolozsvári, J. Ramm, H. Riedl:
"Tuning fracture characteristics of superhard TM carbide coatings by nitrogen alloying";
Vortrag: 47th International Conference on Metallurgical Coatings and Thin Films, ICMCTF,
San Diego;
26.04.2021
- 30.04.2021.
T. Glechner, A Kirnbauer, C. Tomastik, E. Badisch, P. Polcik, P.H. Mayrhofer, H. Riedl:
"Controlling structure and morphology of WC based thin films";
Poster: 17th International Conference on Plasma Surface Engineering,
Erfurt, Deutschland;
07.09.2020
- 10.09.2020.
T. Glechner, S Lang, V. Moraes, D. Primetzhofer, J. Ramm, S. Kolozsvári, H. Riedl:
"Synthesis and thermomechanical properties of Hf-C-N coatings";
Vortrag: 47th International Conference on Metallurgical Coatings and Thin Films, ICMCTF,
San Diego (USA);
26.04.2021
- 30.04.2021.
T. Glechner, P.H. Mayrhofer, R Hahn, T. Wojcik, D. Holec, S. Fritze, D. Primetzhofer, H. Bolvardi, S. Kolozsvári, H Zaid, S. Kodambaka, H. Riedl:
"Tuning structure and mechanical properties of Ta-C coatings by N-alloying and vacancy population";
Vortrag: EMRS Spring Meeting 2019,
Nizza;
27.05.2019
- 31.05.2019.
T. Glechner, P.H. Mayrhofer, R Hahn, T. Wojcik, D. Holec, S. Fritze, D. Primetzhofer, H. Bolvardi, S. Kolozsvári, H Zaid, S. Kodambaka, H. Riedl:
"Tuning structure and mechanical properties of Ta-C coatings by N-alloying and vacancy population";
Poster: Vienna young Scientists Symposium VSS 2019,
Wien;
13.06.2019
- 14.06.2019.
R. Gmeiner, I. Panaitescu, G. Mitteramskogler, J. Wojak, J. Stampfl, A. Boccaccini:
"Lithography-Based Additive Manufacturing of Bioactive Glass Ceramics";
Poster: MSE 2014,
Darmstadt;
23.09.2014
- 25.09.2014.
R. Gmeiner, M. Pfaffinger, J. Stampfl:
"Dental ceramic restorations fabricated by lithography-based additive manufacturing";
Vortrag: 23rd European Dental Materials Conference,
Nürnberg, Deutschland (eingeladen);
27.08.2015
- 28.08.2015.
R. Gmeiner, B. Steyrer, A. Samusjew, A. Mautner, R. Liska, J. Stampfl:
"Stereolithographic Manufacturing of Biodegradable Photopolymers";
Poster: Polymer Processing Society Conference 2015,
Graz;
21.09.2015
- 25.09.2015.
S. Gössinger, C. Lechner, B. Adjassoho:
"PROF4 - Application orientated investigations";
Vortrag: 4th Project Forum Densified Surfaces,
Wien;
20.03.2012.
S. Gössinger, C. Lechner, B. Adjassoho:
"PROF5 - Summary Working Plan Hydro";
Vortrag: 5th Project Forum - Densified Surfaces,
Innsbruck;
05.12.2012.
C. Gorsche, M. Griesser, T. Koch, N. Moszner, R. Liska:
"The potential of β-allyl sulfone-based dimethacrylate networks";
Poster: ESF Research Networking Programme on Precision Polymer Materials (P2M), Lacanau,
Lacanau;
26.05.2015
- 29.05.2015.
C. Grohs, M. Seitzberger, S. Kaltmann, H. J. Böhm:
"FEM-Aided Evaluation of Parameters for Ductile Damage Modeling";
Vortrag: 6th International Conference on Fracture and Damage Mechanics,
Funchal, Madeira;
17.07.2007
- 19.07.2007.
P. Gruber, A. Dobos, M. Tromayer, M. Lunzer, M. Markovic, D. Mandt, A. Ovsianikov:
"High-Resolution 3D Bioprinting by Means of Multiphoton Processing";
Hauptvortrag: II International Symposium Of Medicinal Chemistry And Regenerative Medicine,
Araraquara, Brazil (eingeladen);
22.11.2017
- 24.11.2017.
P. Gruber, M. Markovic, K. Hölzl, M. Tromayer, S. van Vlierberghe, P. Dubruel, R. Liska, J. Stampfl, A. Ovsianikov:
"Laser Photofabrication of Cell-Containing Hydrogel Constructs";
Poster: 3rd European Symposium of Photopolymer Science,
Vienna;
09.09.2014
- 12.09.2014.
O. Guillaume:
"Design and biological response of patient specific implant for craniomaxillofacial bone repair";
Vortrag: 2nd INTERREG - 7th TERMIS Winterschool 2019,
Radstat (eingeladen);
13.01.2019
- 16.01.2019.
R. Haas:
"Violinsaiten - Nanostrukturiertes und heterogenes Stahlgefüge";
Vortrag: Sitzung des ASMET-Unterausschusses Metallographie,
Montanuniversität Leoben;
22.11.2004.
R. Haas, H.P. Degischer, P. Pongratz, J. Wassermann, A. Pyzalla:
"Violinsaiten: Nanostrukturiertes und Heterogenes Stahlgefüge";
Vortrag: 50. Metallkunde-Kolloquium,
Lech am Arlberg, Österreich;
14.04.2004
- 16.04.2004.
R. Haas, H.P. Degischer, A. Pyzalla, P. Pongratz:
"Charakterisierung von korrosionsbeständigen Stahldrähten für Geigensaiten";
Poster: Junior-DGM-Tag,
Hanau (Germany);
18.05.2005.
R. Haas, H.P. Degischer, A. Pyzalla, P. Pongratz:
"Martensitische Phasentransformation und Mikrodehnungen in Geigensaiten aus metastabilen austenitischen Stählen";
Poster: Junior-DGM-Tag,
Hanau/ Deutschland;
18.05.2005.
R. Haas, P. Pongratz, H.P. Degischer:
"Microstructure and Phases in Stainless Steel Violin Strings";
Poster: 6th Multinational Congress on Microscopy - European Extension,
Pula, Kroatien;
01.06.2003
- 05.06.2003.
R. Haas, P. Pongratz, H.P. Degischer, W. Reimers, A. Pyzalla:
"Martensitische Phasentransformation und Mikrodehnungen in Geigensaiten aus metastabilen austenitischen Stählen";
Vortrag: Sitzung des FA 13 Eigenspannungen der AWT,
Geesthacht/ Deutschland;
22.11.2005
- 23.11.2005.
R. Haas, P. Pongratz, H.P. Degischer, W. Steiner:
"Miocrostructure and phases of stainless steel violin strings";
Poster: 17. Workshop on Novel Materials and Superconductivity,
Planneralm, Steiermark;
24.02.2002
- 02.03.2002.
E.J. Haberland, T. Koch, S. Burkert, A. Klemenz:
"Oberflächenuntersuchungen an Gehörknöchelchen-Hartschnitten mit dem Nanoindentor";
Vortrag: 75. Jahresversammlung der Deutschen Gesellschaft für Hals-Nasen-Ohren-Heilkunde, Kopf- und Hals-Chirurgie,
Bad Reichenhall;
19.05.2004
- 23.05.2004.
E.J. Haberland, T. Koch, S. Burkert, A. Klemenz, S. Seidler:
"Pilotstudie zur Nanoindentation an Gehörknöchelchen-Hartschnitten";
Poster: 3rd Symposium Micro- and Nanostructures of Biological Systems,
Halle;
07.06.2004
- 08.06.2004.
R Hahn, M. Bartosik, M. Arndt, P. Polcik, P.H. Mayrhofer:
"Annealing Effect on the Fracture Toughness of CrN/TiN Superlattice Systems";
Poster: (17AN) Nanomechanical Testing VI,
Dubrovnik, Croatia;
01.10.2017
- 06.10.2017.
R Hahn, M. Bartosik, S. Koloszvári, H. Bolvardi, P.H. Mayrhofer:
"Fracture toughness enhancement of epitaxially grown CrN/TiN superlattice thin films";
Vortrag: 2017 MRS Fall Meeting,
Boston;
26.11.2017
- 01.12.2017.
R Hahn, M. Bartosik, P.H. Mayrhofer:
"Superlattice effect for enhanced Fracture Toughness of Hard Coatings and its Intrinsic Origins";
Vortrag: XI. Seminar for CE PhD Students in Materials Science,
Wien;
09.11.2017
- 10.11.2017.
R Hahn, M. Bartosik, H. Riedl, H. Bolvardi, S. Kolozsvári, P.H. Mayrhofer:
"Fracture toughness enhancement in superlattice hard coatings";
Vortrag: 46th International Conference on Metallurgical Coatings and Thin Films,
San Diego;
19.05.2019
- 24.05.2019.
R Hahn, A. Berer, T. Glechner, J. Ramm, O Hunold, S. Kolozsvári, H. Riedl:
"Influence of the deposition parameters on the structural evolution and thermo-mechanical properties of HiPIMS sputtered Transition metal carbides coatings";
Poster: 17th International Conference on Plasma Surface Engineering,
Erfurt, Deutschland;
07.09.2020
- 10.09.2020.
R Hahn, C. Fuger, G Habler, H. Bolvardi, P. Polcik, P.H. Mayrhofer, H. Riedl:
"Fracture-Microstructure Relations of W-diboride Thin Films";
Vortrag: 47th International Conference on Metallurgical Coatings and Thin Films, ICMCTF,
San Diego, CA, USA;
26.04.2021
- 30.04.2021.
R Hahn, C. Fuger, G Habler, H. Bolvardi, P. Polcik, P.H. Mayrhofer, H. Riedl:
"Influence of the microstructure on the fracture characteristics of WB2-z based thin films";
als Vortrag angenommen für: Materials Science Colloquium,
Lech;
19.04.2020
- 22.04.2020.
R Hahn, C. Fuger, V. Moraes, H. Bolvardi, P. Polcik, P.H. Mayrhofer, H. Riedl:
"Influence of alloying elements on the mechanical properties, especially fracture toughness, of the WB2-z base system";
Poster: Nanomechanical Testing In Materials Research And Development Vii,
Malaga;
29.09.2019
- 04.10.2019.
R Hahn, C. Fuger, V. Moraes, O Hunold, P. Polcik, P.H. Mayrhofer, H. Riedl:
"Influence of alloying elements on the mechanical properties of the WB2-z base system";
Poster: AVS 2020 International Twitter Poster Competition,
Twitter Poster Competition;
06.07.2020.
R Hahn, S. Rosenecker, T. Wojcik, O Hunold, S. Kolozsvári, H. Riedl:
"Influence of microstructure and defects on the fracture properties of protective CrN coatings";
Vortrag: 2020 MRS Virtual Spring/Fall Meeting,
Boston, MA, USA;
27.11.2020
- 04.12.2020.
R Hahn, S. Rosenecker, T. Wojcik, O Hunold, S. Kolozsvári, H. Riedl:
"Microstructural influences on the fracture properties of CrN coatings";
Poster: 47th International Conference on Metallurgical Coatings and Thin Films, ICMCTF,
San Diego, CA, USA;
26.04.2021
- 30.04.2021.
G. Harakaly, M. Kury, C. Gorsche, K. Seidler, H. Reghunathan, P. Dorfinger, T. Koch, J. Stampfl, N. Moszner, R. Liska:
"Addition fragmentation chain transfer agents for formation of tough photopolymer network in 3D printing applications";
Poster: Workshop Additive manufacturing as a tool to create life in 3D,
Brno;
26.07.2017
- 27.07.2017.
C. Heller, M. Schwentenwein, J. Stampfl, F. Varga, R. Liska, M. Porodec, M. Schulz-Siegmund, G. Russmüller:
"Additive Manufacturing Technologies for the 3D Fabrication of Biocompatible and Biodegradable Photopolymers.";
Vortrag: MRS Fall Meeting 2009,
Boston, MA, USA;
30.11.2009
- 03.12.2009.
A. Hochwallner, J. Stampfl:
"Molecular Dynamics Simulation of the Dynamic Mechanical Response of Photopolymerized Methacrylate Networks";
Vortrag: virtual European Symposium of Photopolymer Sciences,
Online;
15.06.2021
- 17.06.2021.
A. Hochwallner, J. Stampfl:
"Molecular Dynamics Simulation of the Mechanical Properties of Photopolymers used in 3D-Printing";
Vortrag: ESIAM21 Virtual Conference,
Vienna;
08.09.2021
- 10.09.2021.
A. Hochwallner, J. Stampfl:
"Watching Polymer Networks Form: Molecular Dynamics Simulation of the Chain Growth Polymerization of Photopolymers";
Vortrag: EUROMAT 2021,
Graz;
13.09.2021
- 17.09.2021.
K. Hölzl:
"Photosensitive Gelatin-Methacrylamide in 3D cell culture";
Poster: ViCEM - Vienna Center for Engineering in Medicine Inaugural Meeting 2017,
Wien;
09.11.2017
- 10.11.2017.
M. Hohlrieder, K. Cicha, J. Stampfl, A. Teuschl, H. Redl:
"Bioreactor for the biaxial mechanical stimulation of silk based cruciate ligament grafts";
Poster: 22nd European Conference on Biomaterials,
Lausanne, Schweiz;
07.09.2009
- 11.09.2009.
D. Holec, M. Friak, Z. Zhang, M. Bartosik, P.H. Mayrhofer:
"Mechanical and structural properties of CrN/AlN superlattices";
Poster: 44th International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego;
18.04.2017
- 23.04.2017.
D. Holec, J. Keckes, P.H. Mayrhofer:
"Impact of a thin film texture on mechanical properties";
Vortrag: MSE 2014,
Darmstadt;
23.09.2014
- 25.09.2014.
J. Homa:
"Funktionelle Photopolymere - Anwendungen für Rapid Manufacturing";
Vortrag: Innovative Technologien vom Design zum komplexen Prototypen,
Purkersdorf (eingeladen);
13.06.2007.
J. Homa:
"Rapid Tooling für die Verarbeitung pulverbasierter Werkstoffe";
Vortrag: Junior-DGM-Tag,
Berlin, D;
07.06.2006.
J. Homa, J. Stampfl:
"Direct and Indirect Fabrication of Ceramic Prototypes Using Rapid Prototyping";
Vortrag: Euromat 2007,
Nürnberg, Deutschland;
09.09.2007
- 13.09.2007.
J. Homa, J. Stampfl:
"Fabrication of Cellular Ceramics Structures by Gel-Casting and Rapid Prototyping";
Poster: Junior Euromat 2006,
Lausanne, CH;
04.09.2006
- 08.09.2006.
J. Homa, S. Zellhofer, J. Stampfl:
"Material Properties Of Gel-cast Rsic For Cross Flow Diesel Particulate Filters";
Vortrag: Materials Science and Engineering,
Nürnberg, Deutschland;
01.09.2008
- 04.09.2008.
P. Homporova:
"Phase evolution in titanium alloy Ti 6Al-4V";
Vortrag: PhD seminar Prag,
Prag;
02.11.2009
- 05.11.2009.
T. Huber, H.P. Degischer:
"Thermisches Ausdehnungsverhalten von Al-SiCp Metall-Matrix-Verbundwerkstoffen für Trägerplatten elektronischer Bauteile";
Vortrag: 49. Metallkundekolloquium: Werkstoffe - Einsatz und Entwicklungstendenzen,
Leoben;
07.04.2003
- 09.04.2003.
T. Huber, H.P. Degischer, G. Lefranc, T. Schmitt:
"Thermal expansion behaviour of Aluminium-Matrix-Composites with SiC particulates";
Vortrag: EUROMAT 2003,
Lausanne, CH;
01.09.2003
- 05.09.2003.
T. Huber, A. Mohammed, H.P. Degischer:
"Thermal Expansion Behavior of Metal-Matrix Composites";
Vortrag: Composites Testing and Model Identification, CompTest 2003,
Chalons-en-Champagne (F);
28.01.2003
- 30.01.2003.
O Hudak, E. Aschauer, V. Dalbauer, O Hunold, M. Arndt, P. Polcik, P. Felfer, H. Riedl:
"Corrosion induced diffusion pathways in thin film materials investigated by atom probe tomography";
Poster: 47th International Conference on Metallurgical Coatings and Thin Films, ICMCTF,
San Diego, CA, USA;
26.04.2021
- 30.04.2021.
O Hudak, E. Aschauer, V. Dalbauer, O Hunold, M. Arndt, P. Polcik, P. Felfer, H. Riedl:
"Corrosion induced diffusion pathways in thin film materials investigated by atom probe tomography";
Vortrag: AVS 67 Virtual Symposium,
Virtual Symposium;
25.10.2021
- 28.10.2021.
B. Husar, A. Mautner, C. Heller, M. Schwentenwein, F. Varga, T. Koch, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"Utilization of photopolymerization of new low toxic vinyl monomers in bone tissue engineering";
Poster: The 3rd TERMIS World Congress 2012,
Vienna;
05.09.2012
- 08.09.2012.
B. Husar, A. Mautner, C. Heller, M. Schwentenwein, F. Varga, T. Koch, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"Vinyl esters and vinyl carbonates: low cytotoxic alternatives to (meth)acrylates";
Poster: ESF Research Networking Programme on Precision Polymer Materials (P2M),
San Feliu de Guixols;
24.09.2012
- 28.09.2012.
B. Husar, A. Mautner, F. Varga, J. Stampfl, R. Liska:
"An overview on low cytotoxic alternatives to (meth)acrylates: vinyl esters and vinyl carbonates";
Vortrag: RadTech USA 2014,
Chicago (Rosemont);
12.05.2014
- 14.05.2014.
M. Ikeda, X. Yan, H. Euchner, A. Prokofiev, L. Prochaska, R. Svagera, G. Lientschnig, S. Paschen:
"Phonon Thermal Conductivity of Filled Cage Compounds";
Vortrag: 2014 MRS Fall Meeting,
Boston, USA;
30.11.2014
- 05.12.2014.
F. Imtiaz, E. Kozeschnik:
"Isothermal Austenite Decomposition in Low to Ultra-low Carbon Steels";
Poster: THERMEC 2009,
Berlin, GERMANY;
25.08.2009
- 29.08.2009.
R. Inführ, C. Fritscher, V. Schmidt, L. Kuna, R. Liska, H. Lichtenegger, J. Stampfl:
"Structuring Methods Capable of Building 3D Parts with Feature Resolutions from 50 µm to 100 nm";
Poster: Junior Euromat 2006,
Lausanne, Switzerland;
04.09.2006
- 06.09.2006.
R. Inführ, Ch. Fritscher, V. Schmidt, L. Kuna, R. Liska, H. Lichtenegger, J. Stampfl:
"Structuring Methods Capable of Building 3D Parts with Feature Resolutions from 50 µm to 100 nm";
Poster: Junior Euromat,
Lausanne, Switzerland;
04.09.2006
- 08.09.2006.
R. Inführ, R. Liska, H. Lichtenegger, Ch. Fritscher, J. Stampfl, N. Hüsing:
"3D Lithography of Organo-Soluble Mold Materials for Sol-Gel Nanocomposites";
Poster: RadTech Europe 2005,
Barcelona, Spain;
18.10.2005
- 20.10.2005.
R. Inführ, N.U Pucher, C. Heller, H. Lichtenegger, R. Liska, V. Schmidt, L. Kuna, A. Haase, J. Stampfl:
"Functional Polymers Structured by Two Photon Lithography";
Vortrag: EMRS Spring Meeting 2007,
Strasbourg, France;
28.05.2007
- 01.06.2007.
R. Inführ, N.U Pucher, H. Lichtenegger, R. Liska, V. Schmidt, V. Satzinger, J. Stampfl:
"Refractive Index Patterning of Flexible Waveguide Materials by Two-Photon Polymerization";
Poster: Materials Science and Engineering - MSE 2008,
Nürnberg;
01.09.2008
- 04.09.2008.
R. Inführ, J. Stampfl, N. Pucher, H. Lichtenegger, R. Liska, V. Schmidt, L. Kuna, A. Haase:
"Functional Polymers Structured by Two Photon Lithography";
Vortrag: E-MRS European Materials Research Society - Spring Meeting 2007,
Strasbourg/ France;
28.05.2007
- 01.06.2007.
S. Ivanovici, C. Rill, C. Feldgitscher, M. Puchberger, T. Koch, G. Kickelbick:
"Hybrid nanocomposites based on metal oxides and polysiloxanes with controlled morphology";
Poster: MRS Spring Meeting,
San Francisco;
09.04.2007
- 13.04.2007.
T. Ivas, A. Grundy, E. Povoden-Karadeniz, L.J. Gauckler:
"Thermodynamic modeling and applications of Ce-Gd-Co-O system";
Vortrag: Thermo-Calc Anwendertreffen,
Aachen;
09.09.2010
- 10.09.2010.
A. Jacob, E. Povoden-Karadeniz:
"Applied Calphad modeling of MX phases in thermokinetic simulations towards predictive microstructural modeling of microalloyed steels";
Poster: Calphad XLVIII,
Singapur;
02.06.2019
- 07.06.2019.
A. Jacob, E. Povoden-Karadeniz:
"Thermokinetic simulation of σ phase in duplex steels";
Vortrag: ESSC & Expo 2019,
Wien;
30.09.2019
- 02.10.2019.
A. Jacob, E. Povoden-Karadeniz:
"Thermokinetic simulation of Laves phases precipitation in high Cr steels";
Vortrag: International Workshop on Laves phases,
Düsseldorf;
14.01.2019
- 15.01.2019.
A. Jacob, E. Povoden-Karadeniz, E. Kozeschnik:
"Thermodynamic modeling of Fe-Cr-Ni and its implication for the calculation of multicomponent system";
Poster: 46. Calphad International Conference,
St. Malo;
11.06.2017
- 16.06.2017.
A. Jacob, E. Povoden-Karadeniz, E. Kozeschnik, C. Domain, G. Adjanor, P. Todeschini:
"Thermodynamic modeling of G-phase for applied Calphad in Fe-based alloys";
Vortrag: Calphad XLVIII,
Singapur;
02.06.2019
- 07.06.2019.
A. Jacob, R. Schuster, E. Povoden-Karadeniz:
"Understanding the formation mechanism of σ phase in hyper duplex steels: experiments and computation";
Vortrag: Intermetallics 2021,
Germany;
04.10.2021
- 08.10.2021.
A. Jacob, M. Talik, J. Lopez, B. Kuhn, E. Povoden-Karadeniz, E. Kozeschnik:
"Thermodynamic and kinetic modeling of Laves phase containing systems for the development of high Cr ferritic steels";
Vortrag: CALPHADXLIV,
Japan;
29.05.2016
- 03.06.2016.
R. Jancek, A. Kottar, B. Kriszt, H.P. Degischer:
"Strain-hardening and damage of foamed aluminium during tensile deformation";
Vortrag: Symposium Cellular Metals and Polymers,
Fürth (Deutschland);
12.10.2004
- 14.10.2004.
B. Jóni, N. Eder, T. Ungár, H.P. Degischer:
"Dislocation density in plastically deformed ferritic steel determined by high-resolution X-ray line profile analysis";
Poster: 5th Seminar for PhD students "Research in progress on metallic materials",
TU Graz;
08.11.2010
- 09.11.2010.
E. Kabliman, C. Schlögl, J. Kronsteiner, E. Kozeschnik:
"Integrated Modeling of Materials Microstructure during Thermo-Mechanical Processing: a DYNACalc Material Model";
Vortrag: EUROMAT 2017,
THESSALONIKI;
17.09.2017
- 22.09.2017.
S. Kaltmann:
"Vienna Rail Research Initiative "Crash Weld"";
Vortrag: Crash Weld,
Wien;
08.06.2006
- 08.06.2006.
J. Kastner, S. Baumgartner, B. Plank, B. Harrer, C. Gusenbauer, G. Requena, G. Garces:
"Microstructure characterization of thermomechanically treated Al- and Mg-alloys by high resolution X-ray computed tomography";
Vortrag: EUROMAT 2013,
Sevilla;
08.09.2013
- 13.09.2013.
A Kirnbauer, S. Kagerer, P. Polcik, P.H. Mayrhofer:
"Improved Ti-Al-Ta-N coatings by doping with LaB6 and CeSi2";
Vortrag: 47th International Conference on Metallurgical Coatings and Thin Films, ICMCTF,
San Diego;
26.04.2021
- 30.04.2021.
A Kirnbauer, C. Koller, S. Kolozsvári, P.H. Mayrhofer:
"Multielement rutile-structured AlCrNbTaTi-oxide coatings synthesised by reactive magnetron sputtering";
Poster: 46th International Conference on Metallurgical Coatings and Thin Films,
San Diego;
19.05.2019
- 24.05.2019.
A Kirnbauer, C. Koller, P. Polcik, P.H. Mayrhofer:
"Structure, mechanical properties and thermal stability of magnetron sputtered HfTaVWZr high-entropy boride coatings";
Vortrag: 46th International Conference on Metallurgical Coatings and Thin Films,
San Diego;
19.05.2019
- 24.05.2019.
A Kirnbauer, C.M. Koller, S. Koloszvári, P.H. Mayrhofer:
"Structure, mechanical properties and thermal stability of reactively sputtered AlTaTiVZr high-entropy nitride coatings";
Vortrag: 16th International Conference on Plasma Surface Engineering,
Garmisch;
17.09.2018.
A Kirnbauer, C.M. Koller, S. Koloszvári, P.H. Mayrhofer:
"Thermal stability of reactively sputtered HfTaTiVZr high-entropy nitride coatings";
Vortrag: Spring Meeting of the European Materials Research Society 2018,
Strasbourg;
18.06.2018
- 22.06.2018.
A Kirnbauer, A. Kretschmer, C.M. Koller, T. Wojcik, M. Hans, J.M. Schneider, P. Polcik, P.H. Mayrhofer:
"Mechanical properties and thermal stability of reactively sputtered multicomponent Hf-Ta-Ti-V-Zr nitrides";
Hauptvortrag: 17th International Conference on Plasma Surface Engineering,
Erfurt, Deutschland;
07.09.2020
- 10.09.2020.
A Kirnbauer, P.H. Mayrhofer:
"High-entropy ceramic thin films synthesized by magnetron sputtering";
Vortrag: Materials Research Society- Fall Meeting 2019 (MRS 2019),
Boston, MA, USA;
01.12.2019
- 06.12.2019.
A Kirnbauer, P. Polcik, P.H. Mayrhofer:
"Phase formation and thermal stability of reactively and non-reactively sputtered high-entropy metal-sublattice carbides";
Hauptvortrag: AVS 67 Virtual Symposium,
Charlotte, NC, USA;
25.10.2021
- 28.10.2021.
F. Klimashin, H. Euchner, D. Holec, P.H. Mayrhofer:
"Supersaturated intermetallic phases within the ternary Mo-Cr-N system";
Vortrag: Intermetallics 2015,
Bad Staffelstein;
28.09.2015
- 02.10.2015.
F. Klimashin, H. Euchner, P.H. Mayrhofer:
"Composition driven phase evolution and mechanical properties of sputtered Mo-Al-N hard coatings";
Poster: 42nd International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego (USA);
20.04.2015
- 24.04.2015.
F. Klimashin, H. Euchner, P.H. Mayrhofer:
"Composition driven phase evolution in Mo-Cr-N and Mo-Al-N hard coatings";
Vortrag: Oorgandagarna,
Visby, Schweden;
15.06.2015
- 17.06.2015.
F. Klimashin, H. Euchner, P.H. Mayrhofer:
"Experimental and computational studies on Mo-N";
Vortrag: TACT 2015,
Tainan;
15.11.2015
- 18.11.2015.
F. Klimashin, H. Euchner, P.H. Mayrhofer:
"Phase evolution, microstructure, and mechanical properties of Mo-Cr-N hard coatings";
Vortrag: Vienna Young Scientists Symposium (VSS) 2015,
Wien;
25.06.2015
- 26.06.2015.
F. Klimashin, H. Euchner, P.H. Mayrhofer:
"Structure and mechanical properties of Mo-Cr-N hard coatings";
Vortrag: 42nd International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego (USA);
20.04.2015
- 24.04.2015.
F. Klimashin, N. Koutná, L. Lobmaier, D. Holec, P.H. Mayrhofer:
"Tuning the hardness-toughness relationship by combining MoN with TaN";
Vortrag: 46th International Conference on Metallurgical Coatings and Thin Films,
San Diego, CA, USA;
20.05.2019
- 24.05.2019.
F. Klimashin, P.H. Mayrhofer:
"The Role of Vacancies in the W-N System";
Poster: 46th International Conference on Metallurgical Coatings and Thin Films,
San Diego (USA);
20.05.2019
- 24.05.2019.
B. Koch, A. Hochwallner, R. Liska, J. Stampfl:
"Ink development for the fabrication of digital materials with increased fracture toughness";
Vortrag: ESIAM,
Online;
08.09.2021
- 10.09.2021.
T. Koch, S. Seidler:
"Einfluss der Zusammensetzung und Abkühlgeschwindigkeit auf die Mikrohärte von PP/HDPE-Blends";
Vortrag: Werkstoffwoche 2004,
München;
21.09.2004
- 23.09.2004.
B. Kohlhauser, H. Riedl, M. Ripoll Rodríguez, C. Gachot, P.H. Mayrhofer:
"In-situ solid lubricant formation on W or Mo based carbide and nitride coatings in lubricated tribo contacts";
Vortrag: Spring Meeting of the European Materials Research Society 2018,
Strasbourg;
18.06.2018
- 22.06.2018.
B. Kohlhauser, H. Riedl, M. Ripoll Rodríguez, P.H. Mayrhofer:
"Influence of EP Additive Containing Lubricants on the in-situ Formation of Low Friction Tribofilms on Tungsten Based Coatings";
Poster: 44th International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego;
18.04.2017
- 23.04.2017.
B. Kohlhauser, M. Ripoll, H. Riedl, C.M. Koller, N. Koutná, G Ramirez, A. Erdemir, C. Gachot, P.H. Mayrhofer:
"On the In-situ Formation of Transition Metal Disulphides in Lubricated WN or WC Coating Contacts";
Vortrag: 46th International Conference on Metallurgical Coatings and Thin Films,
San Diego;
19.05.2019
- 24.05.2019.
B. Kohlhauser, M. Ripoll Rodríguez, H. Riedl, C. Gachot, P.H. Mayrhofer:
"Interaction of EP additives with W or Mo based carbide and nitride coatings and their in-situ related formation of a low friction tribofilm.";
Vortrag: 6th World Tribology Congress WTC,
Beijing, China;
17.09.2017
- 23.09.2017.
B. Kohlhauser, M. Ripoll Rodríguez, H. Riedl, C. Gachot, G Ramirez, A. Erdemir, P.H. Mayrhofer:
"Generation of a low friction tribofilm on Mo- and W-containing surfaces and coatings";
Vortrag: The 7th International Conference on the Internet of Things (IoT 2017),
Linz, Austria;
22.10.2017
- 25.10.2017.
B. Kohlhauser, M. Ripoll Rodríguez, H. Riedl, D. Primetzhofer, A. Erdemir, P.H. Mayrhofer:
"Phase evolution and triblogical properties of molybdenum- and tungsten carbide coatings";
Poster: 16th International Conference on Plasma Surface Engineering,
Garmisch;
17.09.2018.
C.M. Koller, D. Holec, S. Kolozsvári, J. Paulitsch, P.H. Mayrhofer:
"Addressing Phase Stability of Physical Vapour Deposited (Al,Cr,X)2O3 Coatings by Density Functional Theory";
Vortrag: 2nd German-Austrian Workshop on Computational Materials Science,
Kirchdorf i. Tirol;
19.01.2015
- 23.01.2015.
C.M. Koller, J. Ramm, S. Kolozsvári, J. Paulitsch, P.H. Mayrhofer:
"Structure and Morphology of Cathodic Arc Evaporated (Cr,Al)2O3-based Multilayer Coatings";
Poster: 11. Gefüge und Bruch Tagung,
Leoben;
08.04.2015
- 10.04.2015.
J. Kollmer, P. Dorfinger, C. Gorsche, R. Liska, J. Stampfl:
"Toughening and coloring of photopolymers for lithography-based 3D-printing";
Vortrag: 6th International Conference on Additive Technologies iCAT 2016,
Nürnberg;
29.11.2016
- 30.11.2016.
J. Kollmer, D. Grunenberg, C. Gorsche, R. Liska, J. Stampfl:
"Lithographiebasierte GF für die Prozessierung hochviskoser Photopolymere";
Poster: Internationale Messe & Konferenz für additive Technologien,
Erfurt;
05.06.2017
- 07.06.2017.
R. Koos, Z. Asghar, G. Requena:
"Effect of 3D Networks Formed by Ni, Cu and Fe Aluminides on the Strength of Al-Si Piston Alloys";
Vortrag: ICAA13,
Pittsburgh;
03.06.2012
- 07.06.2012.
R. Koos, Z. Asghar, G. Requena:
"Effect of 3D Networks Formed by Ni, Cu and Fe Aluminides on the Strength of Al-Si Piston Alloys";
Vortrag: 7th Seminar for Central European PhD Students,
Trnava;
15.11.2012
- 16.11.2012.
R. Koos, Z. Asghar, G. Requena:
"Effect of 3D Networks Formed by Ni, Cu and Fe Aluminides on the Strength of Al-Si Piston Alloys";
Vortrag: Archimat 2012,
Prag;
11.10.2012
- 12.10.2012.
R. Koos, G. Requena:
"X-ray CT for microstructure characterization of light metals";
Vortrag: Industrial CT Scanning,
München (eingeladen);
23.10.2013
- 25.10.2013.
R. Koos, G. Requena, E. Boller:
"Correlation between the internal architecture and the thermo-mechanical behaviour of near-eutectic and hypereutectic Al-Si alloys";
Vortrag: EUROMAT 2013,
Sevilla;
08.09.2013
- 13.09.2013.
R. Koos, G. Requena, E. Boller:
"Thermo-mechanical behaviour and internal architecture of near-eutectic and hypereutectic Al-Si alloys";
Vortrag: LightMAT 2013,
Bremen;
03.09.2013
- 05.09.2013.
A. Kottar, A. Mohammed, H.P. Degischer:
"Röntgen-Computer-Tomografie an Kohlenstrofffaser-verstärkten Leichtmetallen";
Poster: 14. DGM Symposium Verbundwerkstoffe und Werkstoffverbunde,
Wien;
02.07.2003
- 04.07.2003.
N. Koutná, P. Řehák, Z. Zhang, M. Černý, M. Bartosik, M. Friak, M. Sob, P.H. Mayrhofer, D. Holec:
"Peculiar oscillations in nano-scale AlN/TiN and other nitride-based superlattices";
Vortrag: 46th International Conference on Metallurgical Coatings and Thin Films,
San Diego;
19.05.2019
- 24.05.2019.
N. Koutná, J. Buchinger, R Hahn, J. Zálesák, M. Bartosik, M. Friak, M. Sob, D. Holec, P.H. Mayrhofer:
"Probing defected layers of MoN/TaN and TiN/WN superlattices";
Poster: 46th International Conference on Metallurgical Coatings and Thin Films,
San Diego;
19.05.2019
- 24.05.2019.
N. Koutná, R Hahn, J. Buchinger, M. Friak, M. Bartosik, M. Sob, P.H. Mayrhofer, D. Holec:
"Understanding relationship between structural and mechanical properties of metastable superlattices";
Vortrag: MSMF9,
Brno;
26.06.2019
- 28.06.2019.
N. Koutná, R Hahn, J. Buchinger, J. Zálesák, J. Keckes, M. Bartosik, M. Friak, D. Holec, P.H. Mayrhofer:
"Vacancies as a key mechanism for tuning thermodynamic stability and mechanical properties of nitride-based superlattices";
Vortrag: Materials Science and Engineering - MSE 2018,
Darmstadt;
26.09.2018
- 28.09.2018.
N. Koutná, D. Holec, R Hahn, M. Friak, P.H. Mayrhofer:
"Vacancies-driven energetics and elasticity of MoN/TaN superlattices";
Poster: ViCoM,
Vienna;
04.04.2018
- 06.04.2018.
N. Koutná, S. Zöhrer, P. Erdely, R. Franz, Y. Du, P.H. Mayrhofer, D. Holec:
"Experimental chemistry and structural stability of AlNb 3 clarified by a formation of ordered antisite defects";
Vortrag: Euromat 2019,
Stockholm;
01.09.2019
- 05.09.2019.
E. Kozeschnik:
"Aluminium-Hybridlegierungen 2xxx, 6xxx, 7xxx";
Vortrag: AMAG Beirat,
Ranshofen;
03.05.2017.
E. Kozeschnik:
"Ausscheidungsmodellierung am IWS: Wie es begann und wohin der Weg führt";
Vortrag: 12. IWS Werkstofftagung,
Graz (eingeladen);
03.12.2015.
E. Kozeschnik:
"From state parameter-based microstructure modeling to temperature and strain rate-dependent yield stress";
Vortrag: 9th International Conference on Multiscale Materials Modeling,
Osaka (eingeladen);
28.10.2018
- 02.11.2018.
E. Kozeschnik:
"MatCalc - Ein Werkzeug zur Simulation metallurgischer Prozesse";
Vortrag: TU Clausthal Metallurgie-Kolloquium 2016,
Clausthal-Zellerfeld (eingeladen);
03.11.2016
- 04.11.2016.
E. Kozeschnik:
"MatCalc - The Materials Calculator. Functionality and applications";
Vortrag: Thermodynamic Workshop Austria,
Kapfenberg (eingeladen);
29.10.2015.
E. Kozeschnik:
"Mg - vacancy binding in fcc Al";
Vortrag: European Aluminium Technology Platform - Working Group 5: Predictive Modelling,
Aachen, Germany;
01.12.2011.
E. Kozeschnik:
"Modeling phase transformations with MatCalc";
Vortrag: Höganäs Chair Seminar,
Vienna (eingeladen);
18.09.2009.
E. Kozeschnik:
"Modeling precipitation in primary solidification microstructures - accounting for microsegregation and heterogeneous nucleation";
Vortrag: SinoGerman Workshop,
Bochum;
17.06.2013
- 21.06.2013.
E. Kozeschnik:
"Modeling solid-state phase transitions on atomistic and continuums scale";
Vortrag: Workshop "Novel materials and superconductors",
Planneralm;
20.02.2010
- 28.02.2010.
E. Kozeschnik:
"Modeling solid-state precipitation on different scales";
Vortrag: Workshop CompMat 2009,
Schlaining;
01.10.2009
- 02.10.2009.
E. Kozeschnik:
"Modeling the early stages of solid-state precipitation - Monte Carlo study and continuums simulations";
Vortrag: 3rd Sino-German Symposium on Computational Thermodynamics and Kinetics and their applications to Solidification and Solid-state Phase Transformation,
Xian, China (eingeladen);
20.06.2011
- 25.06.2011.
E. Kozeschnik:
"Modellierung und Simulation des Potenzials zur Ausscheidungs-Verfestigung bei der Wärmebehandlung von 6xxx Al-Legierungen";
Vortrag: MEFORM 2018,
Freiberg;
21.03.2018
- 23.03.2018.
E. Kozeschnik:
"Modelling of the Material Steel - Basics, Limits, Trends";
Vortrag: voestalpine Synergieplattform,
voestalpine Stahlwelt Linz, Austria;
04.10.2011.
E. Kozeschnik:
"Multiscale simulations of multi-component phases";
Vortrag: 5th ViCoM Workshop,
Schlaining;
12.11.2013
- 13.11.2013.
E. Kozeschnik:
"Physikalische Metallurgie: Was kann die Alu-Welt von der Stahlwelt lernen?";
Vortrag: AMAG Beirat,
Grundlsee (eingeladen);
08.05.2018
- 09.05.2018.
E. Kozeschnik:
"Predictive simulation of multi-component precipitation - Where are we, and where are we going?";
Vortrag: ETH Seminar,
Zürich;
16.10.2013.
E. Kozeschnik:
"Predictive simulation of multi-component precipitation - Where are we, and where are we going?";
Vortrag: "OMD 2014". The fundamental problems. Innovative Materials and Technologies,
Moskau (eingeladen);
14.04.2014
- 17.04.2014.
E. Kozeschnik:
"Simultaneous evolution microstructure and precipitation - State of the art in modeling with MatCalc";
Vortrag: Werkstoffkundliches Seminar Institut für Materialprüfung, Werkstoffkunde und Festigkeitslehre (IMWF),
Stuttgart (eingeladen);
22.01.2015.
E. Kozeschnik:
"Simultaneous evolution of microstructure and precipitation - State of the art in modeling with MatCalc";
Vortrag: ICAMS Advanced Discussions,
Bochum (eingeladen);
08.07.2014.
E. Kozeschnik:
"Simultaneous evolution of microstructure and precipitation - State of the art in modeling with MatCalc";
Vortrag: Seminar TU Chemnitz,
Chemnitz (eingeladen);
10.02.2015
- 11.02.2015.
E. Kozeschnik:
"Simultaneous evolution of microstructure and precipitation - State of the art in modeling with MatCalc";
Vortrag: Seminar Saarbrücken,
Saarbrücken;
17.10.2017.
E. Kozeschnik:
"Thermo-kinetic modeling of multi-component multi-phase multi-particle precipitation";
Hauptvortrag: International Conference on Physical and Numerical Simulation of Materials Processing,
Guilin, China (eingeladen);
15.11.2010
- 19.11.2010.
E. Kozeschnik:
"Thermo-kinetics based materials modeling with MatCalc - Functionality and integration";
Vortrag: 1st International Workshop on Software Solutions for ICME,
Rolduc (eingeladen);
24.06.2014
- 27.06.2014.
E. Kozeschnik:
"Through process modelling of precipitation reactions";
Vortrag: ISAB,
Cambridge (eingeladen);
11.02.2014
- 12.02.2014.
E. Kozeschnik, J. Kreyca, H. Buken, J. Svoboda, H. Riedel, F.D. Fischer:
"Temperature and strain rate effects on strengthening of metallic materials";
Hauptvortrag: THERMEC´2016,
Graz (eingeladen);
29.05.2016
- 03.06.2016.
E. Kozeschnik, H. Leitner:
"Christian Doppler Labor Early Stages of Precipitation";
Hauptvortrag: 20 Jahre Christian Doppler Forschungsgesellschaft - Wissen schafft Wert,
Wien (eingeladen);
13.10.2015.
E. Kozeschnik, E. Povoden-Karadeniz:
"Modellierung und Simulation metallischer Werkstoffe für medizinische Anwendungen";
Vortrag: Bio-meets-materials,
Semmering (eingeladen);
29.09.2016
- 30.09.2016.
E. Kozeschnik, S. Primig, H. Leitner:
"Early Stages of Precipitation - Experiments and Modelling";
Hauptvortrag: 60. Metallkunde-Jubiläumskolloquium,
Lech am Arlberg;
23.04.2014
- 25.04.2014.
E. Kozeschnik, A. Redermeier, D. Reith, T. Kerschner, R. Podloucky:
"Monte Carlo study of Cu precipitation in Fe - From temperature-dependent cluster expansion to local chemical environment potentials";
Vortrag: ICAMS Advanced Discussions,
Bochum (eingeladen);
15.06.2015
- 16.06.2015.
E. Kozeschnik, Y.V. Shan, F.D. Fischer, J. Svoboda:
"Thermo-kinetics of Mg-Si couples as a precursor to precipitation in Al-Mg-Si alloys";
Vortrag: EUROMAT 2015,
Warszawa (eingeladen);
20.09.2015
- 24.09.2015.
E. Kozeschnik, B. Sonderegger:
"Nb(C,N) precipitation and its interaction with recrystallization during hot deformation of steel";
Vortrag: TMS 2017,
San Diego;
26.02.2017
- 02.03.2017.
E. Kozeschnik, B. Sonderegger:
"Precipitate nucleation in highly supersaturated solid solutions";
Vortrag: EUROMAT 2017,
THESSALONIKI;
17.09.2017
- 22.09.2017.
E. Kozeschnik, B. Sonderegger:
"TEM characterization and precipitation simulation of secondary phases in Ni-base superalloy Rene 65";
Vortrag: FIMPART,
Bordeaux;
09.07.2017
- 12.07.2017.
E. Kozeschnik, J. Svoboda, F. Fischer:
"Application of the thermodynamic extremal principle to solid-state precipitation";
Vortrag: Workshop Mechanics of Materials ELACTAM,
Havanna (eingeladen);
22.02.2016
- 24.02.2016.
E. Kozeschnik, J. Svoboda, R. Radis, F. Fischer:
"Modeling precipitation of AlN at austenite grain boundaries";
Vortrag: THERMEC 2009,
Berlin;
25.08.2009
- 29.08.2009.
E. Kozeschnik, P. Warczok, Y. Shan, R. Radis, I. Holzer, B. Sonderegger, J. Svoboda, F. Fischer:
"Modeling solid-state precipitation on different length scales";
Vortrag: 1st International Conference on Material Modelling,
Dortmund;
14.09.2009
- 18.09.2009.
E. Kozeschnik, P. Warczok, J. Zenisek:
"Diffusion und Koagulation von Ausscheidungs-Clustern - Simulation auf atomistischer und Kontinuums-Skala";
Vortrag: 57. Metallkunde Kolloquium,
Lech am Arlberg;
11.04.2011
- 13.04.2011.
A. Kretschmer, V. Moraes, D. Primetzhofer, K. Yalamanchili, H. Rudigier, P.H. Mayrhofer:
"Improving phase stability, hardness and oxidation resistance of reactive magnetron sputtered (AlvCrwNbxTayTiz)N thin films by Si-alloying";
Vortrag: 17th International Conference on Plasma Surface Engineering,
Erfurt, Deutschland;
07.09.2020
- 10.09.2020.
J. Kreyca, A. Falahati, E. Kozeschnik:
"Strain hardening of a 6000 series aluminium alloy";
Poster: 62. Metallkunde Kolloquium,
Lech am Arlberg;
11.04.2016
- 13.04.2016.
J. Kreyca, E. Kozeschnik:
"Flow stress modeling and microstructure development during deformation of metallic materials";
Vortrag: MEFORM 2017,
Freiberg;
15.03.2017
- 16.03.2017.
J. Kreyca, E. Kozeschnik:
"Modeling the stress-strain curve of poly-crystalline metals using a state parameter-based approach";
Hauptvortrag: PLASTICITY 2015,
Hilton Rose Hall Resort & Spa, Montego Bay, Jamaica, (eingeladen);
04.01.2015
- 09.01.2015.
J. Kreyca, E. Kozeschnik:
"Thermally activated strain hardening in Al-alloys";
Vortrag: 63. Metallkunde Kolloquium,
Lech am Arlberg;
18.04.2017
- 21.04.2017.
J. Kreyca, B. Viernstein, E. Kozeschnik:
"State parameter-based modeling of the strain rate and temperature dependent yield stress";
Hauptvortrag: THERMEC 2018,
Paris, Frankreich (eingeladen);
08.07.2018
- 13.07.2018.
S. Krisam, Z. Silvayeh, E. Povoden-Karadeniz, F. Kiraly, J. Domitner:
"Evaluation and validation of thermodynamics and diffusion kinetics in aluminum-iron base systems for advanced modelling of aluminum-steel welding";
Vortrag: Euromat 2019,
Stockholm;
01.09.2019
- 05.09.2019.
B. Kriszt, H.P. Degischer:
"Versagen zellularer Metalle durch Verformungslokalisierung";
Vortrag: Gefüge und Bruch,
Leoben;
10.04.2002
- 12.04.2002.
M. Kumar:
"Hot tensile testing of AA7020";
Vortrag: 2nd Seminar on MODERN LIGHT METALS for doctoral students of Charles University Praha and University of Technology Vienna/IMST,
TU Wien;
11.01.2007
- 13.01.2007.
M. Kumar:
"Increasing ductility of age hardening Al-Alloys";
Vortrag: Seminar "Heterogeneous Materials",
Wien;
04.03.2008
- 05.03.2008.
M. Kumar, C. Poletti, H.P. Degischer:
"Effect of thermomechanical treatments on age hardenable aluminum alloys";
Vortrag: Seminar for PhD Students "Research in progress on metallic materials", Charles University Prague,
Czech Republic;
02.11.2009
- 03.11.2009.
M. Kumar, C. Poletti, H.P. Degischer:
"Warm deformation behaviour of precipitation hardened AA6016 alloys";
Poster: Junior Euromat 2008,
Lausanne, Switzerland;
14.07.2008
- 18.07.2008.
S. Kumar, S. Krisam, F. Kiraly, R. Abart, A. Keplinger, E. Povoden-Karadeniz:
"Experimental study on distribution of alloying elements in hyper duplex stainless steel steel by means of EMPA";
Vortrag: Euromat 2019,
Stockholm;
01.09.2019
- 05.09.2019.
S. Kumar, R. Schuster, T. Wojcik, A. Keplinger, E. Povoden-Karadeniz:
"Orientation relationships between secondary and primary phases in aged hyper duplex steel";
Vortrag: THERMEC 2021,
Online;
01.06.2021
- 05.06.2021.
J. Kumpfmüller, R. Inführ, K. Stadlmann, K. Cicha, V. Satzinger, J. Stampfl, R. Liska:
"Flexible Optical WaveGuides via Two-Photon Polymerization";
Poster: Materials Science and Engineering,
Darmstadt, Germany;
24.08.2010
- 26.08.2010.
A. Kutsch, S. Baumgartner, J. Stampfl:
"Concepts for toughening 3D-printable polymers and ceramics";
Vortrag: THERMEC 2021,
Online;
01.06.2021
- 05.06.2021.
A. Kutsch, C. Hofstetter, S. Baudis, M. Schwentenwein, J. Stampfl:
"Investigations on the rheology and deagglomeration of digital light processing based vat polymerisation of Si3N4 slurries containing different dispersing additives";
Vortrag: ESIAM,
Online;
08.09.2021
- 10.09.2021.
A. Kutsch, C. Hofstetter, M. Schwentenwein, J. Stampfl:
"Lithography-Based Additive Manufacturing Of Alumina";
Poster: virtual European Symposium of Photopolymer Sciences,
Online;
15.06.2021
- 17.06.2021.
A. Kutsch, C. Hofstetter, J. Stampfl:
"Optimization of rheological properties of 3D printable ceramic inks for biomedical applications";
Vortrag: Austrian Cluster for Tissue Regeneration Annual Meeting,
Wien;
30.08.2021
- 31.08.2021.
A. Kutsch, M. Schwentenwein, C. Hofstetter, J. Stampfl:
"Lithography-based additive manufacturing advancements of alumina";
Poster: Young Ceramists Additive Manufacturing Forum,
Online;
28.10.2020
- 30.10.2020.
A. Kutsch, M. Schwentenwein, C. Hofstetter, J. Stampfl:
"Lithography-based additive manufacturing of alumina";
Vortrag: EUROMAT 2021,
Online;
13.09.2021
- 17.09.2021.
P. Lang:
"Simulation of the Precipitation sequence in Al-Mg-Si systems with the software package MatCalc";
Vortrag: PhD Seminar 2009 "Research in progress on metallic materials",
Department of Physics of Materials, Faculty of Mathematics and Physics, Charles University in Prague;
02.11.2009
- 03.11.2009.
P. Lang:
"Thermo-kinetic quantitative prediction of the metastable and stable phases in 7xxx series aluminium alloys II";
Vortrag: 2. Sitzung des wissenschaftlich-technologischen Beirats der AMAG 2012,
Ranshofen;
06.11.2012.
P. Lang et al.:
"Atomistic and Ab Initio Calculations" - Fundamentals and Applications in Material Science";
Vortrag: 5th Seminar for PhD students "Research in progress on metallic materials",
Graz;
08.11.2010
- 09.11.2010.
P. Lang et al.:
"Vacancy-solute clusters in Al-alloys; Ab initio studies";
Vortrag: EATP; Grenoble Institute of Technology,
Grenoble; France;
10.07.2012.
P. Lang, A. Falahati:
"Thermo-kinetic quantitative prediction of the metastable and stable phases in 7xxx series aluminium alloys";
Vortrag: 1. Sitzung des wissenschaftlich-technologischen Beirats der AMAG 2012,
Ranshofen;
26.06.2012.
P. Lang, E. Povoden-Karadeniz, M.R. Ahmadi, A. Falahati, E. Kozeschnik:
"Through-process precipitation modeling in Al alloys";
Poster: Vienna_tec 2012 / Join Ex,
Wien;
09.10.2012
- 12.10.2012.
P. Lang, Y.V. Shan, E. Kozeschnik:
"The life-time of structural vacancies in the presence of solute trapping";
Vortrag: ICAA14,
Trondheim, Norway;
15.06.2014
- 19.06.2014.
F. Lasagni:
"Caracterización 3D de Aleaciones Al-Si y Al-Si-Mg por tomografía FIB-EDX";
Vortrag: Jornadas de Investigadores Ibero-americanos,
Alicante, Spain (eingeladen);
23.05.2007
- 25.05.2007.
F. Lasagni:
"Characterization of 3D heterogeneities in Al-alloys by FIB-SEM Tomography";
Vortrag: HetMat meeting,
Université Catholique de Louvain (UCL), Louvain La Neuve, Belgium;
19.04.2007
- 20.04.2007.
F. Lasagni:
"Influence of Si Spheroidization and Solution Treatment on Thermal Expansion in Al-Si-Alloys";
Vortrag: 2nd Meeting ADEMAT Network,
London;
01.07.2004
- 03.07.2004.
F. Lasagni, J. Acuna, H.P. Degischer:
"The influence of the Si content on the mechanical properties of short fiber reinforced Al-composites";
Vortrag: 16. DGM-Symposium Verbundwerkstoffe und Werkstoffverbunde,
Bremen, Deutschland;
14.03.2007
- 16.03.2007.
F. Lasagni, H.P. Degischer, M. Papakyriacou:
"Influence of Si Spheroidization on Thermal Expansion in Al-Si-Alloys";
Poster: 13th annual Conference of Doctoral Students - Week of Doctoral Studies 2004,
Prag (Tschechische Republik);
15.06.2004
- 18.06.2004.
F. Lasagni, H.P. Degischer, M. Papakyriacou:
"Precipitation and Spheroidization of Si in Al-Si-Alloys Effect Thermal Expansion";
Poster: Junior Euromat 2004,
Lausanne;
06.09.2004
- 09.09.2004.
F. Lasagni, A. Lasagni, M. Engstler, H.P. Degischer, F. Mücklich:
"3D-Characterization of Al-Si and Al-Si-Mg-alloys by high resolution FIB-SEI-Tomography";
Vortrag: Euromat 2007,
Nürnberg;
10.11.2007
- 13.11.2007.
F. Lasagni, A. Lasagni, M. Engstler, H.P. Degischer, F. Mücklich:
"3D-Characterization of Al-Si and Al-Si-Mg-alloys by high resolution FIB-SEI-Tomography";
Poster: Euromat 2007,
Nürnberg;
10.11.2007
- 13.11.2007.
F. Lasagni, H. Mohammadian, A. Falahati, H.P. Degischer, P. Schulz, M. Papakyriacou, B. Mingler:
"Si Precipitation Kinetics in AlSi(Mg) Alloys";
Vortrag: Aluminium Congress 2006,
Essen, Germany;
21.09.2006
- 22.09.2006.
F. Lasagni, H. Mohammadian, A. Falahati, H.P. Degischer, P. Schulz, M. Papakyriacou, B. Mingler:
"Si Precipitation Kinetics in AlSi(Mg) Alloys";
Poster: Aluminium Congress 2006,
Essen, Germany;
21.09.2006
- 22.09.2006.
F. Lasagni, G. Requena, H.P. Degischer, B. Mingler, M. Papakyriacou:
"Entmischung in Al-Si-Legierungen";
Vortrag: 38. Metallographie-Tagung 2004,
Bochum (Deutschland);
29.09.2004
- 01.10.2004.
H. Lasfargues, T. Glechner, C.M. Koller, V. Paneta, D. Primetzhofer, S. Koloszvári, D. Holec, H. Riedl, P.H. Mayrhofer:
"Non-reactively Sputtered Ultra-High Temperature Hf-C and Ta-C Coatings";
Vortrag: 44th International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego (USA);
23.04.2017
- 28.04.2017.
C. Lechner, S. Gössinger, B. Adjassoho:
"Forschungsschwerpunkt Schlagverdichten - Überblick über aktuelle und zukünftige Forschungstätigkeiten";
Vortrag: 1. Fachforum Festklopfen,
Darmstadt;
11.10.2012.
L. Lederová, A. Orendáčová, R. Tarasenko, M. Bartosik, V. Tkáč, P.H. Mayrhofer, M. Orendáč, V. Sechovský, A. Feher:
"Thermodynamic properties of the two-dimensional quantum magnet Cu(tn)Cl2";
Vortrag: The 21st International Conference on Solid Compound of Transition Elements,
Vienna;
25.03.2018
- 29.03.2018.
D. Leitlmeier, H.P. Degischer, N. Babscan, H. Flankl:
"From continuous casting to extrusion of AZ31 - a portrait of process management, structure and properties";
Vortrag: 2nd Workshop on Cold and Hot Forging of Light Weight Materials,
Delft;
28.05.2002.
Z. Li, M. Siklos, N.U Pucher, K. Cicha, A. Ajami, W. Husinsky, J. Stampfl, R. Liska:
"Synthesis and Structure-Activity Relationship of Several Novel Two-Photon Initiators based on a D-pi-A-pi-D Chromophore";
Poster: Materials Science and Engineering,
Darmstadt, Germany;
24.08.2010
- 26.08.2010.
H. Lichtenegger:
"Biomineralisation in Natur und Labor: Kupferzähne von Würmern und nanostrukturiertes Silikat";
Vortrag: 2. Berichtskolloquium, DFG, Prizipien der Biomineralisation,
Bonn-Röttgen, Deutschland (eingeladen);
30.08.2004
- 01.09.2004.
H. Lichtenegger:
"Biomineralisation in Natur und Labor: Kupferzähne von Würmern und nanostrukturiertes Silikat";
Vortrag: Institut für Materialphysik, Universität Wien,
Wien (eingeladen);
10.11.2004.
H. Lichtenegger:
"Biomineralisation und bio-inspirierte Nanoverbundwerkstoffe";
Vortrag: Aktuelle Probleme aus der Materialwissenschaft II, Universität für Bodenkultur,
Wien (eingeladen);
08.06.2004.
H. Lichtenegger:
"Bissig mit Kupfer und Zink - die Nanostruktur von Meereswurmzähnen untersucht mit Synchrotronstrahlung";
Vortrag: Institut für Biophysik und Röntgenstrukturforschung, ÖAW,
Graz (eingeladen);
30.06.2004.
H. Lichtenegger:
"Bissig mit Kupfer und Zink - die Struktur von Meereswurmzähnen untersucht mit Synchrotronstrahlung";
Vortrag: Physikalisches Kolloquium, Universität Dortmund,
Dortmund/ Deutschland (eingeladen);
30.05.2006.
H. Lichtenegger:
"Biting with zinc and copper: on the nanostructure of marine worm jaws studied with SAXS, XRD and x-ray absorption spectroscopy";
Vortrag: Wilhelm und Elise Heraeus Seminar,
Bad Honnef (Deutschland) (eingeladen);
09.05.2004
- 12.05.2004.
H. Lichtenegger:
"Copper and zinc in worm teeth: hardening of tissues by transition metals";
Vortrag: Institutskolloqium des Max Planck Instituts für Kolloid- und Grenzflächenforschung,
Golm (Deutschland) (eingeladen);
18.11.2003.
H. Lichtenegger:
"Hierarchically structured silica nanocomposites";
Vortrag: 6th ELBA - Max Planck Forum on nanoscale Science and Technology,
Portoconte (Italien) (eingeladen);
09.09.2004
- 11.09.2004.
H. Lichtenegger:
"Metall in den Zähnen von Meereswürmern, ein alternatives mechanisches Konzept";
Vortrag: Erich-Schmid-Kolloquium, Erich Schmid Institut, ÖAW,
Leoben (eingeladen);
22.01.2004.
H. Lichtenegger:
"Modern methods for the study of complex materials";
Vortrag: Physikalisches Kolloqium (Christian-Albrechts-Universität Kiel),
Sehlendorf (Deutschland) (eingeladen);
10.09.2003
- 12.09.2003.
H. Lichtenegger:
"Nanostrukturierte Materialien-Verbundwerkstoffe nach biologischem Vorbild";
Vortrag: Organisch-Technologisches Kolloquium, Institut für Chemische Technologie organischer Stoffe,
TU Graz (eingeladen);
08.03.2005.
H. Lichtenegger, Ch. Fritscher, J. Stampfl, S. Seidler, N. Hüsing, R. Liska:
"3-D templating of hierarchical materials";
Vortrag: MRS Spring Meeting,
San Francisco;
12.04.2004
- 16.04.2004.
H. Lichtenegger, R. Liska, J. Stampfl:
"STRUCMAT- Materialien für die Strukturierung mit 2-Photonenlithographie (TPA)";
Vortrag: ISOTEC-Kickoff-Meeting,
Reinischkogel, Österreich;
16.06.2005
- 18.06.2005.
H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"Fabrication of bio-inspired ceramic composites";
Poster: EUROMAT 2004,
Lausanne, Schweiz;
06.09.2004
- 09.09.2004.
S. Ligon, B. Husar, S. Baudis, F. Nehl, A. Nigisch, H. Bergmeister, D. Bernhard, J. Stampfl, R. Liska:
"Improved elastomeric materials for CAD/CAM generation of vascular structures in soft tissue replacement therapies";
Poster: The 3rd TERMIS World Congress 2012,
Vienna;
05.09.2012
- 08.09.2012.
S. Ligon, X.H. Qin, P. Esfandiari, Z. Tomasikova, P. Gruber, A. Ovsianikov, R. Liska:
"Advanced Applications of Thiol-Ene Formulations";
Vortrag: RadTech USA 2014,
Chicago (Rosemont);
12.05.2014
- 14.05.2014.
S. Ligon, M. Tromayer, Z. Li, J. Torgersen, A. Ajami, A. Rosspeintner, S. Naumov, T. Scherzer, J. Stampfl, R. Liska:
"New Developments in Initiators for Two-Photon Polymerization";
Vortrag: RadTech USA 2014,
Chicago (Rosemont);
12.05.2014
- 14.05.2014.
R. Liska, M. Schuster, R. Inführ, C. Turecek, N.U Pucher, C. Heller, B. Seidl, C. Fritscher, L. Kuna, A. Haase, V. Schmidt, H. Lichtenegger, F. Varga, J. Stampfl:
"Single- and Two-Photon Initiated Polymerization in Rapid Prototyping";
Vortrag: 2007 MRS Spring Meeting,
San Francisco, USA (eingeladen);
09.04.2007
- 13.04.2007.
O. Liske, P. Dorfinger, B. Steyrer, C. Gorsche, R. Gmeiner, J. Stampfl, R. Liska, S. Baudis, S. Knaus:
"Tailor-made 3D Manufactured Products from Bio-based Renewable Raw Materials";
Poster: Blickpunkt Forschung: Materialinnovationen @ TU Wien,
Wien;
19.09.2018.
L. Löfler, D. Holec, M. Bartosik, P.H. Mayrhofer:
"Mechanical properties of CrN/TiN superlattices from ab initio calculations";
Poster: Materials Science and Engineering - MSE 2018,
Darmstadt;
26.09.2018
- 28.09.2018.
L. Löfler, D. Holec, P.H. Mayrhofer:
"Multi-method study of (semi-) coherent stabilisation of alumina on Al-Cr droplets";
Poster: ViCoM,
Wien;
04.04.2018
- 06.04.2018.
M. Lückl, O. Caliskanoglu, G. Arth:
"Thermomechanical Modelling of Continuous Casting";
Vortrag: K1MET - Scientific Exchange Day 2014,
Leoben;
10.03.2014.
M. Lückl, S. Ilie, J. Six, E. Kozeschnik:
"The Influence of Surface Microstructure Control Cooling on the Hot Ductility of Microalloyed Steel";
Vortrag: MSE 2014,
Darmstadt;
23.09.2014
- 25.09.2014.
M. Lückl, T. Wojcik, J. Wucher, S. Zamberger, E. Kozeschnik:
"Effect of AlN Precipitates on the Hot Ductility of Microalloyed Steel";
Vortrag: 61. Metallkunde-Kolloquium,
Lech am Arlberg;
15.04.2015
- 17.04.2015.
S. Lüftl:
"Development of a postgraduate course on light weight design with modern materials";
Vortrag: ALWS Subproj. I,
Braunau;
04.04.2006.
S. Lüftl:
"Development of a postgraduate course on light weight design with modern materials";
Vortrag: ALWS Subproj. I,
Braunau;
14.11.2006.
S. Lüftl:
"Development of a postgraduate course on light weight design with modern materials";
Poster: ALWS Subproj. I,
Ranshofen/Braunau;
12.04.2007
- 13.04.2007.
S. Lüftl:
"Development of a postgraduate course on light weight design with modern materials";
Vortrag: ALWS Subproj. I,
Braunau;
28.11.2007.
S. Lüftl:
"Development of a postgraduate course on light weight design with modern materials";
Vortrag: ALWS Subproj. I, 10.4.2007,
Braunau;
10.04.2007.
M. Lunzer, D. Ossipov, P. Gruber, K. Hölzl, M. Markovic, R. Liska, A. Ovsianikov:
"Biocompatible Micropatterning of o-Nitrobenzyl Crosslinked Hydrogels by Sensitised Two-Photon Cleavage";
Poster: Workshop Additive manufacturing as a tool to create life in 3D,
Brno;
26.07.2017
- 27.07.2017.
M. Lunzer, D. Ossipov, P. Gruber, K. Hölzl, M. Markovic, R. Liska, A. Ovsianikov:
"Biocompatible Micropatterning of o-Nitrobenzyl Crosslinked Hydrogels by Sensitized Two- Photon Cleavage";
Poster: 1st Vienna Polymer-Group Symposium,
Wien;
27.02.2018.
M. Lunzer, D. Ossipov, K. Hölzl, M. Markovic, R. Liska, A. Ovsianikov:
"Photo-grafting of VEGF protein gradients into elastin-like polymer hydrogels for improved vascularization";
Poster: ViCEM - Vienna Center for Engineering in Medicine Inaugural Meeting 2017,
Wien;
09.11.2017
- 10.11.2017.
M.H. Luxner, J. Stampfl, H. E. Pettermann:
"Disordered Open Cell Structures: Elasto-Plastic Behavior and Defect Sensitivity";
Vortrag: McMAT 2007 - ASME Applied Mechanics and Materials Conference,
Austin, TX;
03.06.2007
- 07.06.2007.
M.H. Luxner, J. Stampfl, H. E. Pettermann:
"Nichtlineare Simulation dreidimensionaler offenzelliger Strukturen mit regelmäßigen und gestörten Geometrien";
Vortrag: Workshop Simulation von Schaumstoffen mit stark nichtlinearem Verhalten,
Hohenwart, Deutschland;
15.09.2005
- 16.09.2005.
M.H. Luxner, J. Stampfl, H. E. Pettermann:
"Nonlinear Behavior of 3D Regular and Irregular Open Cell Structures";
Vortrag: Third M.I.T. Conference on Computational Fluid and Solid Mechanics,
Cambridge, MA (eingeladen);
14.06.2005
- 17.06.2005.
M.H. Luxner, J. Stampfl, H. E. Pettermann:
"Nonlinear Behavior of Regular and Irregular Open Cell Structures";
Vortrag: Euromech Colloquium 466 "Computational and Experimental Mechanics of Advanced Materials",
Loughborough;
20.07.2005
- 22.07.2005.
M.H. Luxner, J. Stampfl, A. Woesz, P. Fratzl, H. E. Pettermann:
"Influence of Defects and Perturbations on the Performance of 3D Open Cell Structures";
Vortrag: 3rd European Conference on Computational Mechanics (ECCM 2006),
Lissabon;
05.06.2006
- 09.06.2006.
E. Maire, C. Landron, B. Harrer, W. Altendorfer, H.P. Degischer, K. Track, J. Crespo Casanova:
"In-situ Zugversuche an Sphärogussproben im Synchrotron-Strahl";
Vortrag: 56. Metallkunde Kolloquium,
Lech;
12.04.2010
- 14.04.2010.
D. Mandt, P. Gruber, M. Markovic, M. Tromayer, M. Rothbauer, S. Kratz, J. Van Hoorick, P. Dubruel, S. van Vlierberghe, P. Ertl, R. Liska, A. Ovsianikov:
"Laser Based 3D Printing of Hydrogel Barrier Models for Microfluidic Applications";
Poster: ViCEM - Vienna Center for Engineering in Medicine Inaugural Meeting 2017,
Wien;
09.11.2017
- 10.11.2017.
D. Mandt, P. Gruber, M. Markovic, M. Tromayer, M. Rothbauer, S. Kratz, J. Van Hoorick, P. Dubruel, S. Van Vlierberghe, P. Ertl, R. Liska, A. Ovsianikov:
"Laser-Based 3d Printing Of Hydrogel Barrier Models For Microfluidic Applications";
Poster: Biofabrication for Hierarchical in vitro Tissue Models,
Herstein;
05.06.2017
- 09.06.2017.
D. Mandt, P. Gruber, M. Markovic, M. Tromayer, M. Rothbauer, S. Kratz, J. Van Hoorick, P. Dubruel, S. van Vlierberghe, P. Ertl, R. Liska, A. Ovsianikov:
"Laser-based 3D Printing of Hydrogel Barrier Models for Microfluidic Applications";
Poster: 1st Vienna Polymer-Group Symposium,
Wien;
27.02.2018.
M. Marchetti-Deschmann, J. Galehr, P. Rigger, V. Archodoulaki, G. Allmaier:
"Imaging mass spectrometry of ultrahigh molecular weight polyethylene (UHMW-PE) joint explants";
Vortrag: MassSpecForum Vienna 2011,
Wien;
22.02.2011
- 23.02.2011.
M. Markovic:
"Investigation of Vascularization Strategies for 3D Tissue Engineering";
Vortrag: Online Conference Joint Meeting on Vascular Biology, Inflammation and Thrombosis,
Vienna;
13.05.2020
- 14.05.2020.
M. Markovic:
"Two Photon Polymerization of Vessels-on-Chip";
Vortrag: Joint Meeting on Vascular Biology, Inflammation and Thrombosis 2019,
Vienna;
06.07.2019
- 07.07.2019.
E. Marks:
"3D Simulation of stiffness of short fiber reinforced Al-Si";
Vortrag: Seminar "Heterogeneous Materials",
Wien;
04.03.2008
- 05.03.2008.
E. Marks:
"Tomography and modelling of short fiber reinforced AlSi12-alloy";
Vortrag: 2nd Seminar on MODERN LIGHT METALS for doctoral students of Charles University Praha and University of Technology Vienna/IMST,
TU Wien;
11.01.2007
- 13.01.2007.
E. Marks, G. Requena, H.P. Degischer, E. Boller:
"Microtomography and creep modelling of a short fibre reinforced aluminium alloy";
Vortrag: 1st Conference on 3D-Imaging of Materials and Systems 2008,
Carcans-Maubuisson - near Bordeaux;
08.09.2008
- 12.09.2008.
R. Markut, S. Seidler:
"Nanoindentation of the Second Viennese Cross-Linked Hip Retrieval";
Vortrag: Materials for Improved Wear Resistance of Total Artificial Joints, COST Action 533 Biotrobology, 29.-31.10.2007,
Eibar/ Spain;
29.10.2007.
R. Markut-Kohl, S. Seidler, I. Carpentieri, L. Costa:
"Oxidation of PE-UHMW investigated with FTIR methods used in current research";
Vortrag: COST Action 533 "Materials for Improved Wear Resistance of Total Artificial Joints" , Workshop - 06.-08. Oct, 2008 in Athens, Greece (GR),
Athen;
06.10.2008
- 08.10.2008.
A. Mautner, X.H. Qin, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
"Vinyl carbonates, a new generation of low toxic monomers";
Poster: 1st P2M Networking Conference,
Obernai, F;
11.11.2011
- 14.11.2011.
W. Mayer:
"Fundamental Properties of Vacancies";
Vortrag: CDL - ESOP Meeting,
Böhler Stahl - Kapfenberg;
05.12.2011.
W. Mayer, E. Kozeschnik, D. Krizan:
"Simulation of carbo-nitride precipitation in the multi-phase microstructure of low-carbon steel";
Vortrag: EUROMAT 2013,
Sevilla;
08.09.2013
- 13.09.2013.
W. Mayer, D. Krizan, E. Kozeschnik:
"Simulation of carbo-nitride precipitation in the multi-phase microstructure";
Vortrag: 8th Seminar of Central European PhD Students: Research in Material Science,
Eötvös Lorand University, Budapest;
13.01.2014
- 14.01.2014.
W. Mayer, Y.V. Shan, E. Kozeschnik:
"A dislocation trapping-based model for tempering of martensite";
Hauptvortrag: OPTIMOM 2014,
Pembroke College Oxford;
14.09.2014
- 16.09.2014.
P.H. Mayrhofer:
"Atomistic Guided Development of Hard Coatings for Severe Applications";
Vortrag: AVS 62nd International Symposium,
San Jose (eingeladen);
18.10.2015
- 23.10.2015.
P.H. Mayrhofer:
"Atomistic Guided Development of Hard Thin Films for Severe Applications";
Hauptvortrag: TACT 2015,
Tainan (eingeladen);
15.11.2015
- 18.11.2015.
P.H. Mayrhofer:
"Impact of alloying and interfaces on fracture toughness of transition metal nitrides and borides";
Hauptvortrag: Euromat 2019,
Stockholm (eingeladen);
01.09.2019
- 05.09.2019.
P.H. Mayrhofer:
"Impact of alloying and interfaces on fracture toughness of transition metal nitrides and borides";
Hauptvortrag: TMS 2019,
San Antonio (USA) (eingeladen);
11.03.2019
- 15.03.2019.
P.H. Mayrhofer:
"Impact of alloying and interfaces on fracture toughness of transition metal nitrides and borides";
Hauptvortrag: International Conference from Nanoparticles and Nano-materials to Nanodevices and Nanosystems, 6th IC4N,
Corfu (eingeladen);
30.06.2019
- 03.07.2019.
P.H. Mayrhofer:
"Innovative Materials Design for Improved Tribological Performance of Hard Coatings";
Hauptvortrag: New Challenges in Tribology, IET Birmingham,
Birmingham (eingeladen);
14.03.2018
- 15.03.2018.
P.H. Mayrhofer:
"Interface and interphase controlled properties of transition metal borides: The beauty of imperfections";
Hauptvortrag: 83rd IUVSTA Workshop,
Vadstena (eingeladen);
02.09.2018
- 06.09.2018.
P.H. Mayrhofer:
"Interface and interphase controlled properties of transition metal borides: The BEAUTY of IMPERFECTIONS";
Vortrag: 64. Metallkunde Kolloquium,
Lech am Arlberg;
09.04.2018
- 11.04.2018.
P.H. Mayrhofer:
"Materials Design Guidelines for improved Strength, Ductility, and Stability";
Hauptvortrag: 45th International Conference on Metallurgical Coatings and Thin Films (ICMCTF) 2018,
San Diego, CA (eingeladen);
23.04.2018
- 27.04.2018.
P.H. Mayrhofer:
"Microstructural Design and Architecture of Hard Coatings for Severe Applications: An Experimental and Ab Initio Study";
Hauptvortrag: Solids4Fun,
Wien (eingeladen);
15.11.2013.
P.H. Mayrhofer:
"Microstructural Design and Architecture of Hard Coatings for Severe Applications: An Experimental and Ab Initio Study";
Hauptvortrag: TU Bergakademie Freiberg,
TU Bergakademie Freiberg;
30.06.2014.
P.H. Mayrhofer:
"Protective TM-Al-N Coatings";
Vortrag: Workshop on Protective TM-Al-N Coatings,
Werkstoffchemie, RWTH Aachen, Aachen, Deutschland (eingeladen);
04.12.2012.
P.H. Mayrhofer:
"PVD Coatings: Yesterday, Today, Tomorrow";
Hauptvortrag: Technology Briefing "Innovative, funktionelle Beschichtungen",
Thun, Swiss (eingeladen);
14.11.2018.
P.H. Mayrhofer:
"Quantum Chemistry guided Materials Design Concepts for improved Strength, Ductility, and Stability of Thin Films";
Hauptvortrag: Plasma diagnostics & modelling, towards the industrial applications of plasma-based processes (EFDS workshop),
Mons (eingeladen);
07.02.2018
- 08.02.2018.
P.H. Mayrhofer:
"Spinodal Decomposition of TM-Al-N and Precipitation of AlN";
Vortrag: ILSB Seminar,
Wien (eingeladen);
13.06.2013.
P.H. Mayrhofer:
"Strategies for developing hard coatings for demanding application";
Hauptvortrag: 14th International Ceramics Congress, CIMTEC 2018,
Perugia (eingeladen);
04.06.2018
- 08.06.2018.
P.H. Mayrhofer:
"Strategies for developing strong, tough and stable hard materials, a case study on hard coatings";
Hauptvortrag: 13th International Conference on Solid State Chemistry,
Pardubice (eingeladen);
16.09.2018
- 21.09.2018.
P.H. Mayrhofer, J. Buchinger, C. Fuger, R Hahn, A Kirnbauer, H. Asanuma:
"Progress in developing robust ceramic thin film materials";
Vortrag: VEBLEO Webinar on Materials Science, Engineering and Technology,
Webinar (eingeladen);
17.11.2020
- 20.11.2020.
P.H. Mayrhofer, D. Holec:
"Impact of Al on structure and mechanical properties of NbN and TaN";
Vortrag: 42nd International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego (USA);
20.04.2015
- 24.04.2015.
P.H. Mayrhofer, F. Klimashin, N. Koutná, L. Lobmaier, D. Holec:
"The MoN-TaN system: Coatings for increased performance by tuning their vacancy configuration";
Vortrag: 65. Metallkunde-Kolloquium,
Lech;
24.04.2019
- 26.04.2019.
P.H. Mayrhofer, H Marihart, C.M. Koller, D. Holec:
"Designing the structure and mechanical properties of TaN; An experimental and ab initio study";
Vortrag: 61. Metallkunde-Kolloquium,
Lech am Arlberg;
15.04.2015
- 17.04.2015.
Pj. Mendes Cerveira, H. Schuh, L. Plank, R. Haas, U. Schreiber, T. Klügel, H. Velikoseltsev, A. Brzezinski:
"The apparent diurnal motion of the instantaneous rotation axis from VLBI and the Wettzell "G" ring laser";
Vortrag: Egu 2008,
Vienna;
13.04.2008
- 18.04.2008.
B. Miesenberger, E. Kozeschnik, B. Milkereit, E. Povoden-Karadeniz:
"Computational simulation of precipitation during continuous cooling of 6xxx Al-alloys";
Poster: TMS Annual Meeting & Exhibition 2020,
San Diego;
23.02.2020
- 27.02.2020.
B. Miesenberger, E. Kozeschnik, E. Povoden-Karadeniz, A. Pasching:
"Simulation of precipitation in 6xxx aluminium alloys during continuous cooling DSC";
Vortrag: LightMAT 2019,
Manchester;
05.11.2019
- 07.11.2019.
B. Miesenberger, A. Pasching, E. Kozeschnik, E. Povoden-Karadeniz:
"Characterization and modelling of interactions between Mg-Si precipitates and AlFeSi-based dispersoids during homogenization of 6xxx aluminium alloy";
Vortrag: Euromat 2019,
Stockholm;
01.09.2019
- 05.09.2019.
G. Mitteramskogler, R. Felzmann, S. Gruber, J. Stampfl, Ebert, W. Wachter, J. Laubersheimer:
"Light Curing Strategies for Lithography-Based Additive Manufacturing of Customized Ceramics";
Vortrag: EUROMAT 2013,
Sevilla;
08.09.2013
- 13.09.2013.
G. Mitteramskogler, R. Gmeiner, M. Pfaffinger, J. Stampfl:
"Lithography-based Additive Manufacturing of Parts Made of Zirconia";
Vortrag: MSE 2014,
Darmstadt;
25.09.2012
- 27.09.2012.
H. Mohammadian:
"Dilatometry and calorimetry of Al-Ge(-Si) alloys";
Vortrag: 2nd Seminar on MODERN LIGHT METALS for doctoral students of Charles University Praha and University of Technology Vienna/IMST,
TU Wien;
11.01.2007
- 13.01.2007.
H. Mohammadian:
"Precipitation Kinetics in Al-Alloys Observed by Dilatometry";
Vortrag: Seminar for PhD Students "Research in progress on metallic materials", Charles University Prague,
Prague;
02.11.2009
- 03.11.2009.
H. Mohammadian:
"Precipitation studies in Al-Alloys by Dilatometry";
Vortrag: Seminar "Heterogeneous Materials",
Wien;
04.03.2008
- 05.03.2008.
A. Mohammed, H.P. Degischer, P. Schulz, A. Langkamp:
"Anisotropy of Carbon Fibre Reinforced Aluminium and Magnesium";
Poster: 14. DGM Symposium Verbundwerkstoffe und Werkstoffverbunde,
Wien;
02.07.2003
- 04.07.2003.
A. Mohammed, T. Huber, H.P. Degischer:
"Thermal expansion of metal matrix composites depending on thermal history";
Vortrag: Werkstoffwoche 2004,
München;
21.09.2004
- 23.09.2004.
V. Moraes, C. Fuger, R Hahn, T. Wojcik, M. Arndt, P. Polcik, P.H. Mayrhofer, H. Riedl:
"Ternary diboride based thin films from scratch: Is WB2-z a proper base system for future concepts?";
Vortrag: 65. Metallkunde-Kolloquium,
Lech;
24.04.2019
- 26.04.2019.
V. Moraes, C. Fuger, L. Zauner, R Hahn, H. Bolvardi, P. Polcik, H. Riedl, P.H. Mayrhofer:
"Transition Metal Diborides: Combining Computational And Experimental Materials Science";
Hauptvortrag: International Conference On Mining, Material, And Metallurgical Engineering,
Lisbon;
15.08.2019
- 17.08.2019.
V. Moraes, C. Fuger, L. Zauner, R Hahn, D. Primetzhofer, P. Polcik, H. Riedl, P.H. Mayrhofer:
"2020 ASED Awards Ceremony";
Vortrag: 2020 ASED Awards Ceremony,
Online;
14.12.2020
- 16.12.2020.
V. Moraes, R Hahn, M. Bartosik, H. Riedl, H. Euchner, D. Holec, P.H. Mayrhofer:
"Ab initio guided development of ternary borides: A case study of Ti-B-N, Ti-Zr-B, Ti-W-B, Ta-W-B, and V-W-B systems";
Vortrag: AVS 65th International Symposium,
Long Beach;
21.10.2018
- 26.10.2018.
V. Moraes, D. Holec, H. Bolvardi, P. Polcik, H. Riedl, P.H. Mayrhofer:
"Designing novel boride materials from scratch";
Vortrag: 2017 MRS Fall Meeting,
Boston;
26.11.2017
- 01.12.2017.
M. Nagler, A. Wagner, M. Bartosik, M. Todt, H. J. Böhm:
"Analytical and Numerical Simulation of Residual Stresses in Multilayer Coatings";
Vortrag: Vienna Young Scientists Symposium VSS 2017,
Wien;
01.06.2017
- 02.06.2017.
M. Nalbach, N. Motoi, F. Chalupa-Gantner, O.G. Andriotis, A. Ovsianikov, G. Schitter, P.J. Thurner:
"Tensile viscoelasticity of individual collagen fibrils";
Vortrag: 2021 NanoScientific Forum Europe (NSFE2021),
Freiburg;
15.09.2021
- 17.09.2021.
M. Nalbach, N. Motoi, F. Gantner, O.G. Andriotis, L. Battle, A. Docaj, A. Ovsianikov, G. Schitter, A. Carriero, P.J. Thurner:
"Osteogenesis Imperfecta: Brittle Bones From Stronger Collagen Fibrils";
Vortrag: 26th Congress of the European Society of Biomechanics - ESBiomech,
Mailand;
11.07.2021
- 14.07.2021.
M. Nalbach, N. Motoi, F. Gantner, F.C. Spörl, O.G. Andriotis, A. Ovsianikov, G. Schitter, P.J. Thurner:
"Novel instrument for rapid and force controlled tensile testing of single collagen fibrils";
Vortrag: Scientific Meeting of the Austrian Chapter of ESB,
online / Zoom;
30.11.2020.
T.H. Nam, G. Requena, H.P. Degischer:
"Thermal Expansion study of AlSi7Mg matrix composites with high content SiC particles";
Vortrag: CSM2008 - The International Conference on Computational Solid Mechanics,
Hochiminh City, Vietnam;
27.11.2008
- 30.11.2008.
V. Nedelkovski, O.G. Andriotis, R Hahn, P.H. Mayrhofer, P.J. Thurner:
"AFM-based microbeam bending of human cortical bone lamellae from the femur midshaft";
Vortrag: 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019),
Vienna;
18.02.2019
- 22.02.2019.
K. Öksüz:
"01/12. Sitzung des wissenschaftlich-technologischen Beirats";
Vortrag: 1. Sitzung des wissenschaftlich-technologischen Beirats der AMAG 2012,
Ranshofen (eingeladen);
26.06.2012.
K. Öksüz:
"02/12. Sitzung des wissenschaftlich-technologischen Beirats";
Vortrag: 2. Sitzung des wissenschaftlich-technologischen Beirats der AMAG 2012,
Ranshofen (eingeladen);
06.11.2012.
K. Öksüz:
"7th Seminar for Central European PhD Students";
Vortrag: 7th Seminar for Central European PhD Students,
Trnava (eingeladen);
15.11.2012
- 16.11.2012.
K. Öksüz:
"Hot compression of AA6082";
Vortrag: 2nd Seminar on MODERN LIGHT METALS for doctoral students of Charles University Praha and University of Technology Vienna/IMST,
TU Wien;
11.01.2007
- 13.01.2007.
K. Öksüz, M.R. Ahmadi:
"TMS 2013 Conference";
Vortrag: TMS2013,
Texas, USA (eingeladen);
03.03.2013
- 07.03.2013.
A. Ovsianikov:
"3D Bioprinting";
Vortrag: First INTERREG - 6th TERMIS Winterschool 2018,
Radstadt;
18.01.2018.
A. Ovsianikov:
"3D printing and biofabrication";
Vortrag: ViCEM - Vienna Center for Engineering in Medicine Inaugural Meeting 2017,
Wien;
09.11.2017
- 10.11.2017.
A. Ovsianikov:
"Direct Laser Writing: Biomedical Applications";
Vortrag: FastDot Summer School "Photonics meets Biology",
Hersonissos, Greece;
15.09.2011
- 18.09.2011.
A. Ovsianikov:
"High Resolution 3D Printing for Biomedical Applications";
Vortrag: Bioprinting & 3D-Printing in the Life Sciences EU 2018,
Rotterdam (eingeladen);
07.06.2018
- 09.06.2018.
A. Ovsianikov:
"High resolution two photon printing";
Vortrag: Utrecht Summer School,
Utrecht (eingeladen);
12.07.2021
- 15.07.2021.
A. Ovsianikov:
"Multiphoton Lithography (MLP) for Biomedical Applications";
Vortrag: PhoenixD colloquium,
Hannover (eingeladen);
01.02.2021.
A. Ovsianikov:
"Multiphoton Lithography - Laser-based 3D-Printing with high spatial resolution";
Vortrag: 2017 International Forum on Innovation and Emerging Industries Development (IEID 2017),
Shanghai;
07.11.2017
- 09.11.2017.
A. Ovsianikov:
"Multiphoton Lithography for Biomedical Applications";
Vortrag: Lithuanian National Physics Conference,
Vilnius;
06.10.2021
- 08.10.2021.
A. Ovsianikov:
"Recent progress on hydrogel cell culture and high resolution 3D printing";
Vortrag: Austrian Cluster for Tissue Regeneration Annual Meeting,
Wien;
12.03.2017
- 13.03.2017.
A. Ovsianikov, V. Mironov:
"Tissue Spheroids Encaged into Rigid Microscaffolds - The Third Strategy in Tissue Engineering";
Hauptvortrag: Bayreuth Polymer Symposium,
Bayreuth (eingeladen);
20.09.2015
- 22.09.2015.
A. Ovsianikov, J. Torgersen, X.H. Qin, Z. Li, S Mühleder, W Holnthoner, H. Redl, R. Liska, J. Stampfl:
"Laser fabrication of cell-containing hydrogel constructs";
Vortrag: International Conference on Biofabrication,
Manchester;
29.10.2012
- 31.10.2012.
T. Papst, S. Seidler:
"Untersuchungen zur Realisierbarkeit eines Aluminium-CFK-Verbundträgers";
Poster: 14. DGM Symposium Verbundwerkstoffe und Werkstoffverbunde,
Wien;
02.07.2003
- 04.07.2003.
G. Peer, M. Mitterbauer, P. Knaack, S. Naumov, M. Markovic, A. Ovsianikov, N. Moszner, R. Liska:
"Tetraacylstannnane as Highly Reactive Type I Photoinitiators for Long Wavelength Curing Applications";
Poster: RadTech USA 2019,
Monterey - CA, USA;
15.09.2019
- 18.09.2019.
M. Petrica, B. Duscher, T. Koch, V. Archodoulaki:
"Studies on Tribological Behavior of PEEK and PE-UHMW";
Poster: Polymer Processing Society Conference 2015,
Graz;
21.09.2015
- 25.09.2015.
H. E. Pettermann, D. García Vallejo, J. Stampfl, M.H. Luxner, J. Domínguez:
"Viscoelastic Properties of Open Cell Kelvin Foams";
Vortrag: Ictam 2008,
Adelaide;
24.08.2008
- 29.08.2008.
H. E. Pettermann, D. García Vallejo, J. Stampfl, M.H. Luxner, J. Domínguez:
"Viskoelastische Eigenschaften von zellulären Strukturen";
Vortrag: 3. Wiener Biomaterialsymposium,
Wien;
19.11.2008
- 21.11.2008.
H. E. Pettermann, M.H. Luxner, J. Stampfl:
"Architecture-Property Correlation of Open Cell Materials by Nonlinear FEM Simulations";
Vortrag: EUROMAT 2009,
Glasgow (eingeladen);
07.09.2009
- 10.09.2009.
H. E. Pettermann, M.H. Luxner, A. Woesz, P. Fratzl, J. Stampfl:
"Modellierung und Simulation offenzelliger biomimetischer Strukturen - Elasto-Plastizität und Kollaps versus Unordnung und Defekte";
Vortrag: 2. Wiener Biomaterialsymposium,
Wien;
22.11.2006
- 24.11.2006.
M. Pfaffinger, G. Mitteramskogler, Ö. Kaslioglu, J. Stampfl:
"Stereolithographic Additive Manufacturing of Tricalcium Phosphate";
Vortrag: EURO BioMAT 2015,
Weimar;
21.04.2015
- 22.04.2015.
M. Pfaffinger, J. Stampfl:
"Optimized Tricalcium Phosphate Slurry for Stereolithographic Additive Manufacturing";
Vortrag: MSE 2016,
Darmstadt;
26.09.2016
- 29.09.2016.
H. Pinto:
"Characterization of Material and Component Deterioration using X-rays and Synchrotron Radiation";
Vortrag: Kolloquium, Max-Planck-Institut für Eisenforschung,
Düsseldorf, Germany (eingeladen);
02.11.2005.
H. Pinto:
"Mikrostruktur und Eigenspannungen in teilkristallisierten Li2O-2SiO2 Glaskeramiken";
Vortrag: Sitzung des FA 13 "Eigenspannungen" der AWT,
Geesthacht, Germany;
22.11.2005
- 23.11.2005.
H. Pinto:
"Verformungsmechanismen und Eigenspannung nach Verschleiß von 1.4301 und 1.4439 in tiefkalten Medien";
Vortrag: Sitzung des FA13 "Eigenspannungen" der AWT, 6. und 7. Nov. 2003,
Wien;
06.11.2003
- 07.11.2003.
H. Pinto, A. Pyzalla, K. Assmus, W. Hübner:
"Analyses of Wear at Cryogenic Temperatures";
Poster: Hasylab User Meeting,
Hamburg;
28.01.2005.
H. Pinto, A. Pyzalla, K. Assmus, W. Hübner:
"Microstructural Changes during Friction at Cryogenic Temperatures";
Poster: Hasylab User Meeting,
Hamburg;
30.01.2004.
H. Pinto, A. Pyzalla, K. Assmus, W. Hübner:
"Microstructural Changes during Friction at Cryogenic Temperatures";
Poster: NESY-Symposium, Österreichische Akademie der Wissenschaften,
Wien;
15.04.2004.
H. Pinto, A. Pyzalla, K. Aßmus, W. Hübner, W. Reimers:
"Microstructure Changes at Cryogenic Temperatures";
Poster: Hasylab User Meeting,
Hamburg;
31.01.2003.
H. Pinto, A. Pyzalla, W. Hübner, K. Assmus:
"Influence of environment, temperature and chemical composition on the microstructural deterioration of CrNi steels during friction";
Vortrag: DGM-Tagung Reibung und Verschleiß,
Fürth (Deutschland);
10.03.2004
- 12.03.2004.
C. Poletti:
"Beispiele über Rekristallisation";
Vortrag: Umformung von Metallen, 2. Seminar. Institut für Umformtechnik und Hochleistungslasertechnik (IFLT) und TU-Wien/Inst.f. Werkstofftechnik u. Werkstofftechnologie (IMST),
Wien;
2007.
C. Poletti:
"Hot deformation studies on discontinously reinforced ti-alloys";
Vortrag: Charakterisierung von Titan Matrix Composites,
Kapfenberg;
17.10.2006.
C. Poletti:
"Hot formability of particle reinforced Ti.alloys";
Vortrag: Seminar on "Modern Light Metals",
Charles University Prague;
04.03.2004
- 05.03.2004.
C. Poletti:
"How to determine enthalpies in Al-Alloys quantitatively from DSC thermograms?";
Vortrag: Seminar "Heterogeneous Materials",
Budapest;
22.05.2008
- 23.05.2008.
C. Poletti:
"Local deformation maps of Ti-PRM at high temperatures";
Vortrag: HETMAT Seminar,
Louvain-la-Neuve/ Belgien;
19.04.2007
- 20.04.2007.
C. Poletti, H.P. Degischer, M. Balog, F. Simancik:
"Compacted sub-μm Al grains yielding high temperature strength by a 3D oxide film network";
Vortrag: Materials science and engineering MSE 2010,
Darmstadt;
26.08.2010.
C. Poletti, H.P. Degischer, M. Balog, F. Simancik:
"Compacted sub-μm Al grains yielding high temperature strength by a 3D oxide film network";
Poster: Materials science and engineering MSE 2010,
Darmstadt;
24.06.2010.
C. Poletti, G. Hoeltl, S. Kremmer:
"Mechanische Eigenschaften von Teilchen verstärkt Titanmatrixverbundwerkstoffe";
Vortrag: 16. DGM-Symposium Verbundwerkstoffe und Werkstoffverbunde,
Bremen/ Germany;
14.03.2007
- 16.03.2007.
C. Poletti, S. Kremmer, W. Marketz, H.P. Degischer:
"Studium der Mechanischen Eigenschaften und Mikrostruktur von Titan- und Keramisch-verstärkten (PRTi) Titanlegierungen";
Vortrag: Sitzung der Austrian Aerospace Research, Projekt-Evaluierung,
Wien (Österreich);
21.06.2005.
C. Poletti, W. Marketz, H.P. Degischer:
"Compression and Microstructure of Particle Reinforced Ti-alloys";
Poster: 13th annual Conference of Doctoral Students - Week of Doctoral Studies 2004,
Prag (Tschechische Republik);
15.06.2004
- 18.06.2004.
C. Poletti, W. Marketz, H.P. Degischer:
"Hot Compression of Ti-alloys and Titanium Matrix Composites";
Poster: Junior Euromat 2002,
Lausanne, Schweiz;
06.09.2004
- 09.09.2004.
C. Poletti, W. Marketz, H.P. Degischer:
"TiC-Partikel verstärkte Ti-Legierung";
Poster: 14. DGM Symposium Verbundwerkstoffe und Werkstoffverbunde,
Wien;
02.07.2003
- 04.07.2003.
C. Poletti, A. Merstallinger, T. Schubert, W. Marketz, H.P. Degischer:
"Wear and Friction Coefficient of Particle Reinforced";
Vortrag: DGM-Tagung Reibung und Verschleiß,
Fürth (Deutschland);
10.03.2004
- 12.03.2004.
P. Pongratz, M. Schöbel, H.P. Degischer:
"TEM Analysis of Al3 (Sc,Zr) Precipitation Kinetics in Highly Deformed 7010 Aluminium Alloys";
Vortrag: EUROMAT 2007,
Nürnberg, Deutschland;
10.09.2007
- 13.09.2007.
M. Porodec, C. Heller, R. Liska, J. Stampfl, M. Hacker, M. Schulz-Siegmund:
"Covalent Modification of Photo-cross-linkable Polymers for Bone Tissue Engineering Using a Model Protein";
Poster: International Workshop on Biomacromolecules 2008 - Renewable, Degradable and Biomedical Polymers,
Stockholm/ Schweden;
01.06.2008
- 04.06.2008.
E. Povoden-Karadeniz:
"CALPHAD modeling - Fundamentals and applications";
Vortrag: Physik-Seminar,
TU Wien, Seminarraum 138C, Wiedner Hstr. 8-10, Wien;
16.11.2009.
E. Povoden-Karadeniz:
"Physics-based computational thermokinetic modeling of initial precipitation stages in AA6xxx";
Vortrag: LightMAT 2019,
Manchester;
05.11.2019
- 07.11.2019.
E. Povoden-Karadeniz:
"Realisation of predictive defect chemistry evolution of complex functional oxide materials for solar fuel production";
Vortrag: European advanced energy materials and technology congress,
Stockholm (eingeladen);
25.03.2018
- 28.03.2018.
E. Povoden-Karadeniz:
"Simulation of precipitation in alloys based on computational thermodynamics and physical modeling";
Vortrag: Group Seminar,
ETH Zürich (eingeladen);
19.12.2013.
E. Povoden-Karadeniz:
"Thermodynamic modeling of materials for solid oxide fuel cells";
Vortrag: Seminar des Instituts für Werkstoffwissenschaft und Werkstofftechnologie,
TU Wien, Zemanek-Sem.Raum;
11.02.2009.
E. Povoden-Karadeniz, D. Cirstea, P. Lang, E. Kozeschnik:
"Thermodynamic modeling of metastable phases for precipitation simulation in NiTi shape memory alloys";
Poster: Calphad XLI,
Berkley, USA;
03.06.2012
- 08.06.2012.
E. Povoden-Karadeniz, E. Eidenberger, H. Leitner, E. Kozeschnik:
"Thermodynamics of the Fe-Co-Mo system and modeling of early precipitation in Fe-25 at.% Co-9 at.% Mo alloy";
Vortrag: Calphad XL,
Rio de Janeiro;
22.05.2011
- 27.05.2011.
E. Povoden-Karadeniz, S. Hadke, E. Kozeschnik:
"Thermodynamic modeling and precipitation simulations of detrimental phases for long-term applications of austenitic stainless steel";
Vortrag: 8th European Stainless Steel Conference,
Graz;
27.04.2015
- 30.04.2015.
E. Povoden-Karadeniz, S. Hadke, E. Kozeschnik:
"Thermodynamic modelling and precipitation simulation in austenitic stainless steel";
Vortrag: TOFA 2014,
Brno, Tschechien;
07.09.2014
- 11.09.2014.
E. Povoden-Karadeniz, A. Jacob:
"Computation of competitive precipitation of eta carbonitride phase, Z-phase nitride, and intermetallic G-phase at varying nitrogen contents in Nb- and Si-alloyed austenitic stainless steel";
Vortrag: ESSC & Duplex 2019,
Wien;
30.09.2019
- 02.10.2019.
E. Povoden-Karadeniz, E. Kozeschnik:
"Simulation of precipitation kinetics and precipitation strengthening of B2-precipitates in martensitic PH 13-8 Mo steel";
Vortrag: MS&T 2012,
Pittsburgh, Pennsilvania, USA;
07.10.2012
- 11.10.2012.
E. Povoden-Karadeniz, E. Kozeschnik:
"Thermodynamic modeling of the Mo-Hf-C system and simulation of precipitate evolution in Mo-2Hf-0.2C alloy";
Vortrag: MS&T 2012,
Pittsburgh, Pennsilvania, USA (eingeladen);
07.10.2012
- 11.10.2012.
E. Povoden-Karadeniz, E. Kozeschnik:
"Thermokinetic simulation of gamma´-phase precipitation and evolution of yield strength in superalloy PWA1480";
Poster: 15th international conference on high temperature materials chemistry,
Orleans;
29.03.2016
- 01.04.2016.
E. Povoden-Karadeniz, E. Kozeschnik:
"Thermokinetics of phase transformations in AlTiNbV light-weight refractory HEA";
Vortrag: Euromat 2019,
Stockholm;
01.09.2019
- 05.09.2019.
E. Povoden-Karadeniz, M. Kozeschnik, E. Kozeschnik:
"Energy of coherent gamma/gamma´ phase boundaries close to the solution temperature in the Ni-base superalloy PWA1480";
Poster: Calphad XlII,
San Sebastian, Spanien;
26.05.2013
- 31.05.2013.
E. Povoden-Karadeniz, M. Kozeschnik, E. Kozeschnik:
"Investigation of gamma´ precipitation in Ni-base superalloy PWA1480 by interrupted cooling coupled with thermo-kinetic simulation";
Poster: 2nd world congress of integrated computational materials engineering, ICME 2013,
Salt Lake City, Utah, USA;
07.07.2013
- 11.07.2013.
E. Povoden-Karadeniz, M. Kozeschnik, T. Wojcik, E. Kozeschnik:
"Investigation of γ´ precipitation in Ni-base superalloy PWA1480";
Vortrag: 5th ASEM Workshop "Advanced Electron Microscopy",
MedUni Graz;
07.05.2015
- 08.05.2015.
E. Povoden-Karadeniz, M. Kozeschnik, T. Wojcik, E. Kozeschnik:
"TEM-Analysis of γ´ precipitates in Ni-base superalloy PWA1480";
Vortrag: X. seminar of Central European PhD students in Material Science,
Slovakia;
04.04.2016
- 06.04.2016.
E. Povoden-Karadeniz, P. Lang, D. Cirstea, T. Wojcik, E. Kozeschnik:
"Thermodynamics of Ti-Ni-based shape memory alloys extended by Cu-addition";
Vortrag: IC-CMTP 3,
Miskolc, Ungarn;
06.10.2014
- 10.10.2014.
E. Povoden-Karadeniz, P. Lang, E. Kozeschnik:
"Assessment of thermodynamic data assisted by physically-based thermokinetic modeling";
Vortrag: 2nd world congress of integrated computational materials engineering, ICME 2013,
Salt Lake City, Utah, USA;
07.07.2013
- 11.07.2013.
E. Povoden-Karadeniz, W. Mayer, E. Kozeschnik:
"Thermodynamic modeling of carbon clusters in martensite";
Poster: CALPHADXLIV,
Loano;
31.05.2015
- 05.06.2015.
E. Povoden-Karadeniz, F Moszner, P. Lang, S Pogatscher, P.J. Uggowitzer, E. Kozeschnik:
"Thermodynamics of the Pd-Mn system and phase stability of L10-base Pd1-xMn1-yFex+y";
Vortrag: Calphad XLIII,
Changsha, VR China;
02.06.2014
- 06.06.2014.
E. Povoden-Karadeniz, F Moszner, S Pogatscher, P.J. Uggowitzer, E. Kozeschnik:
"Kinetic simulation of the reverse martensite (alpha`) to austenite (gamma) transformation (alpha`-->gamma) in Fe-Mn-Pd";
Vortrag: MSE 2014,
Darmstadt;
23.09.2014
- 25.09.2014.
E. Povoden-Karadeniz, M. Rath, A. Redermeier, E. Kozeschnik:
"Prediction of eta-phase Ni6AlNb evolution in Ni-base superalloys by computational thermokinetics";
Vortrag: Modelling and Simulation of Superalloys 2017,
Ruhr-Universität Bochum;
29.03.2017
- 31.03.2017.
E. Povoden-Karadeniz, A. Redermeier, E. Kozeschnik:
"Hcp-structured delta phase in new generation single crystal Ni-base superalloys - predicted stability by thermodynamic modeling";
Poster: Modelling and Simulation of Superalloys 2017,
Bochum, Deutschland;
29.03.2017
- 31.03.2017.
E. Povoden-Karadeniz, S. Vujic, S. Hadke, E. Kozeschnik:
"Thermodynamic modeling and simulation of TTP diagrams in stainless steel";
Vortrag: Calphad XlII,
San Sebastian, Spanien;
26.05.2013
- 31.05.2013.
E. Povoden-Karadeniz, P. Warczok, P. Lang, A. Falahati, M. Ahmadi, E. Kozeschnik:
"Thermodynamic Modeling of Guinier-Preston-zones in the Al-Mg-Si System";
Vortrag: ISMANAM 2010, 17th International Symposium on Metastable, Amorphous and Nanostructured Materials,
Zürich;
04.07.2010
- 09.07.2010.
E. Povoden-Karadeniz, P. Warczok, P. Lang, A. Falahati, M. Ahmadi, E. Kozeschnik:
"Thermodynamic modeling of metastable phases in Al-Cu-Mg-Si and applications to precipitation kinetics simulations";
Vortrag: Calphad XL,
Rio de Janeiro;
22.05.2011
- 27.05.2011.
E. Povoden-Karadeniz, P. Warczok, P. Lang, A. Falahati, E. Kozeschnik:
"A thermodynamic model of Guinier-Preston-zones in the Al-Mg-Si system";
Vortrag: Calphad XXXIX,
Jeju, Südkorea;
23.05.2010
- 28.05.2010.
E. Povoden-Karadeniz, S. Zamberger, E. Kozeschnik:
"Impacts of thermodynamic and kinetic model parameterisation on precipitation simulations - Case study of NbC precipitation in microalloyed steel";
Vortrag: 46. Calphad International Conference,
St. Malo;
11.06.2017
- 16.06.2017.
S. Primig, G. Stechauner, E. Kozeschnik:
"Early stages of Cu precipitation in 15-5 PH maraging steel revisited - Experiments and Modelling";
Vortrag: PTM 2015 Solid-Solid Phase Transformation in Inorganic Materials,
Whistler;
28.06.2015
- 03.07.2015.
N.U Pucher, C. Heller, B. Seidl, R. Inführ, L. Kuna, A. Haase, V. Schmidt, H. Lichtenegger, J. Stampfl, R. Liska:
"New alkyne-based initiators for single- ad two-photon-induced photopolymerization";
Poster: 2007 MRS Spring Meeting,
San Francisco;
09.04.2007
- 13.04.2007.
A. Pyzalla:
"A User`s Experience regarding Materials Science with Neutrons and Photons at GKSS Research Center Geesthacht";
Vortrag: Pre-review des Photonen-Neutronen-Ionen-Programms der Helmholtzgesellschaft,
Bonn (eingeladen);
13.02.2004.
A. Pyzalla:
"Future Topics in Materials Science";
Vortrag: TU Delft,
Delft (eingeladen);
05.11.2004.
A. Pyzalla:
"In-situ determination of strain and microstructure changes using synchrotron radiation";
Vortrag: FaME38 workshop,
Grenoble, France (eingeladen);
13.09.2004.
A. Pyzalla:
"In-situ experiments using synchrotron radiation and neutrons";
Vortrag: 1st ANSWER Workshop University of Tennessee, Knoxville,
Tennessee, USA;
18.11.2003.
A. Pyzalla:
"Introduction to Polycrystalline Materials";
Vortrag: Neutron School (Los Alamos National Laboratory),
Los Alamos;
03.03.2005.
A. Pyzalla:
"Material Science: Strain and Texture";
Vortrag: Workshop on Petra-Upgrade, Hasylab,DESY,Hamburg,
Hamburg;
26.05.2003.
A. Pyzalla:
"Mikrostruktur- und Eigenspannungsanalysen mit Röntgen-, Synchrotron-Röntgenstrahlen und Neutronen";
Vortrag: Seminar des Fachgebiets Metallkunde der Montanuniversität Leoben,
Leoben (eingeladen);
11.03.2004.
A. Pyzalla:
"Mikrostrukturanalyse an Ingenieurwerkstoffen mittels Synchrotronstrahlung";
Vortrag: Seminar "Moderne Analytische Chemie", Institut für chemische Technologien und Analytik,
TU Wien (eingeladen);
12.11.2004.
A. Pyzalla:
"Moderne Methoden der Mikrostrukturanalyse";
Vortrag: Werkstofftag,
TU Berlin;
09.05.2003.
A. Pyzalla:
"Neue Methoden in der Eigenspannungsanalyse mit Synchrotron-Röntgenstrahlen und Neutronen";
Vortrag: Seminar der Abteilung Materialforschung des Max-Planck-Instituts für Plasmaphysik,
Garching, Deutschland (eingeladen);
06.05.2004.
A. Pyzalla:
"Neue Möglichkeiten bei der Mikrostruktur- und Eigenspannungsanalyse mit Synchrotronstrahlung";
Vortrag: Kolloquium über Werkstoffmodellierung,
Universität Stuttgart (eingeladen);
13.01.2005.
A. Pyzalla:
"Neue Möglichkeiten in der zerstörungsfreien Werkstoffprüfung mit Röntgenstrahlen";
Vortrag: Researcher Round Table der Voest Alpine Industrieanlagenbau,
Linz, Österreich (eingeladen);
04.06.2004.
A. Pyzalla:
"Neutron Diffractometers for Strain/stress Analyses in Germany";
Vortrag: 1st ANSWER Workshop University of Tennessee, Knoxville,
Tennessee, USA;
17.11.2003.
A. Pyzalla:
"Neutrons in Material Science";
Vortrag: DPG-Tagung,
Berlin (eingeladen);
08.03.2005.
A. Pyzalla:
"Stress and Texture Studies";
Vortrag: NESY Winterschool,
Planneralm, Österreich (eingeladen);
10.03.2005.
A. Pyzalla:
"Synchrotron Radiation: New Perspectives in Material Science and Technology";
Vortrag: Max-Planck-Institut für Eisenforschung,
Düsseldorf (eingeladen);
03.12.2004.
A. Pyzalla:
"Synchrotronstrahlung und Neutronen: Neue Möglichkeiten zur Mikrostruktur-, Textur- und Eigenspannungsanalyse in Werkstoffen und Bauteilen";
Vortrag: Kolloquium der chemisch-physikalischen Gesellschaft, Universität Wien,
Universität Wien;
02.12.2003.
A. Pyzalla:
"Werkstoffcharakterisierung mit Neutronen und Synchrotronstrahlung";
Vortrag: Atominstitut der österreichischen Universitäten,
Wien (eingeladen);
29.04.2005.
A. Pyzalla, B. Camin, H. Kaminski, A. Pernack, T. Buslaps, M. Di Michiel, W. Reimers:
"In-situ Untersuchung vom Kriechschädigungen durch µ-Tomographie und Diffraktion mit Synchrotronstrahlung";
Vortrag: DPG-Tagung,
Berlin;
08.03.2005.
A. Pyzalla, B. Camin, H. Kaminski, A. Pernack, T. Buslaps, M. Di Michiel, W. Reimers:
"In-situ Untersuchung von Kriechvorgängen in mehrphasigen Werkstoffen mit gleichzeitiger Tomographie und Diffraktion";
Vortrag: Tagung des AWT-Fachausschuß 13,
Fraunhofer-Institut IWS Dresden;
01.12.2004.
A. Pyzalla, S. Corkovic:
"In-situ Stress Analysis in Thin Oxide Layers on Fe-Base Materials";
Vortrag: AWT FA Eigenspannungen,
Hamburg, Deutschland;
08.04.2003.
A. Pyzalla, R. Ferreyro, M. Stempniewicz, S. Yi, A. Günther, H.-G. Brokmeier:
"Neutron texture analyses in sauropod bones";
Vortrag: TMS Meeting,
San Francisco (eingeladen);
15.02.2005.
A. Pyzalla, E. Lima, W. Reimers, J. Kuo, D. Raabe:
"Mosaic size distributions in an aluminium bi-crystal deformed by channel die compression";
Vortrag: MECASENS II,
Manchester;
09.09.2003.
A. Pyzalla, H. Pinto:
"Internal stresses in MIG, WIG and CMT-welded steels and aluminum alloys";
Vortrag: IIW-Meeting,
Wels (eingeladen);
18.02.2005.
A. Pyzalla, H. Pinto, W. Reimers, T. Buslaps, V. Honkimäki, L. Zhang, Y. Dabin:
"Microstructural Damage in Thermal Absorbers induced by High Energy Synchrotron Light Irradiation";
Vortrag: MECASENS II,
Manchester;
09.09.2003.
A. Pyzalla, H. Pinto, M. Stempniewicz, U. Göbel, R. Haas, C. Poletti, A. Mohammed, H.P. Degischer:
"Mikrostruktur und Eigenspannungen komplexer Werkstoffe";
Vortrag: Seminar des Instituts für Werkstoffforschung, GKSS Geesthacht,
Geesthacht, Deutschland (eingeladen);
03.02.2004.
A. Pyzalla, H. Pinto, E. Wild, T. Poeste, B. Camin, W. Reimers, D. Shakhvorostov, M. Scherge:
"Mikrostruktur, Textur und Eigenspannungen verschlissener Oberflächen";
Vortrag: Erich-Schmid-Kolloquium, Erich Schmid Institut, ÖAW,
Leoben, Österreich (eingeladen);
24.06.2004.
A. Pyzalla, B. Reetz, A. Jaques, J. Feiereisen, O. Ferry, T. Buslaps, W. Reimers:
"Relaxation of Phase Specific Elastic Strains/Stresses During Deformation of AI/Si- MMCs at Elevated Temperatures";
Vortrag: MECASENS II,
Manchester;
09.09.2003.
A. Pyzalla, W. Reimers, C. Bohne, B. Camin, H. Pinto, L. Wang, A. Fischer, M. Heitkemper, K. Aßmus, W. Hübner:
"Mikrostruktur, Textur und Eigenspannungen verschlissener Oberfläche";
Vortrag: Kolloquium der BAM und des GfT - Arbeitskreises Berlin - Brandenburg,
Berlin;
07.01.2003.
A. Pyzalla, W. Reimers, H.P. Degischer, U. Göbel, S. Dieter, B. Reetz, K. Zimnik, T. Buslaps, A. Jaques:
"Optimisation of Material Microstructure and Component Properties using Synchrotron Radiation";
Vortrag: NESY-Symposium, Österreichische Akademie der Wissenschaften,
Wien;
15.03.2004.
A. Pyzalla, W. Reimers, M. Stempniewicz, B. Reetz, E. Lima, T. Buslaps, A. Jaques:
"Analyses of Strain and Stress in Engineering Materials and Small Components using HESR";
Vortrag: International Workshop "Texture and Strain Analyses using High Energy Synchrotron Radiation",
Hasylab Hamburg;
10.04.2003.
A. Pyzalla, K. Zimnik, H.P. Degischer, W. Reimers, B. Camin, T. Buslaps, M. Di Michiel, R. Martins, H.-G. Brokmeier, A. Günther, U. Göbel:
"In-situ Determination of Materials Behaviour using HESR";
Vortrag: High-Energy-Workshop, APS, Argonne National Lab.,
Argonne, USA (eingeladen);
04.08.2004.
A. Pyzalla, K. Zimnik, M. Stempniewicz, W. Reimers, B. Camin, B. Reetz, E. Wild, T. Buslaps, A. Hansen, A. Jaques:
"Microstructure and Strain/Stress Analyses using Synchrotron Radiation";
Vortrag: 50. Metallkunde-Kolloquium,
Lech am Arlberg (eingeladen);
13.04.2004
- 15.04.2004.
L. Qin:
"A computational study of early-stage precipitation in the Fe-Cu system based on Rare Event Sampling techniques";
Vortrag: X. seminar of Central European PhD students in Material Science,
Kosice;
04.04.2016
- 06.04.2016.
L. Qin:
"Shape analysis of critical copper nucleus in dilute Fe-Cu alloys";
Vortrag: ViCoM Spring Workshop 2017,
Graz;
20.04.2017
- 21.04.2017.
L. Qin, E. Kozeschnik:
"Reconstructing Nucleation Free Energy in Forward Flux Sampling";
Vortrag: ViCoM Workshop Fall 2017,
Schlaining;
19.10.2017
- 20.10.2017.
L. Qin, A. Redermeier:
"Nucleation in ternary solid solution phases";
Vortrag: 8th ViCom Workshop,
Schlaining;
08.04.2015
- 10.04.2015.
L. Qin, A. Redermeier:
"Study of nucleation kinetics in the Fe-Cu system with Forward Flux Sampling";
Vortrag: ViCoM Young Researchers Meeting,
Wien;
22.09.2016
- 23.09.2016.
L. Qin, A. Redermeier:
"Transition rate calculation of early-stage precipitation in Fe-Cu system";
Poster: ViCoM Workshop Oct 2015,
Vienna;
15.10.2015
- 16.10.2015.
L. Qin, A. Redermeier, E. Kozeschnik:
"A computational study of early-stage precipitation in the Fe-Cu system based on Rare Event Sampling techniques";
Vortrag: ViCoM Spring Workshop 2016,
Stadtschlaining;
30.03.2016
- 31.03.2016.
L. Qin, A. Redermeier, E. Kozeschnik:
"Analysis of composition and shape of critical copper nuclei in dilute Fe-Cu alloys from atomistic simulations";
Vortrag: EUROMAT 2017,
THESSALONIKI;
17.09.2017
- 22.09.2017.
X.H. Qin, C. Heller, M. Schwentenwein, F. Varga, G. Russmüller, J. Stampfl, R. Liska:
"New Bio-photopolymers with good biocompatibility for Tissue Engineering";
Poster: Materials Science and Engineering,
Darmstadt, Germany;
24.08.2010
- 26.08.2010.
X.H. Qin, B. Husar, J. Torgersen, S. Mühleder, H. Redl, W. Holnthoner, J. Stampfl, A. Ovsianikov, R. Liska:
"Two-photon polymerization for biodegradable 3D hydrogels scaffolds";
Poster: RadTech Asia 2013,
Shanghai;
20.05.2013
- 24.05.2013.
R. Raab, S. Kolozsvári, R. Rachbauer, P.H. Mayrhofer:
"Influence of multilayer arrangement on structure and mechanical properties of arc evaporated oxide, nitride, and oxide/nitride coatings within the systems Al-Cr-N and Al-Cr-O";
Poster: 15th International Conference on Plasma Surface Engineering,
Garmisch-Partenkirchen;
12.09.2016
- 16.09.2016.
R. Raab, C. Sabitzer, S. Kolozsvári, R. Rachbauer, P.H. Mayrhofer:
"Architectural design of oxide and nitride coatings within the system Al-Cr-N and Al-Cr-O";
Poster: 11. Gefüge und Bruch Tagung,
Leoben;
08.04.2015
- 10.04.2015.
R. Radis, E. Kozeschnik:
"Aluminium nitride precipitation at austenite grain boundaries in microalloyed HSLA steels";
Vortrag: MatCalc Workshop,
TU Wien;
24.11.2008
- 26.11.2008.
R. Radis, E. Kozeschnik:
"Kinetics of AlN and VN Precipitation in Microalloyed Steel";
Vortrag: Evaluierung Christian Doppler Laboratory - Early Stages of Precipitation,
Wien;
04.09.2009.
R. Radis, E. Kozeschnik:
"Modelling and Simulation of Second Phase Precipitation in (HSLA) Microalloyed Steels";
Vortrag: Christian Doppler Laboratory - Workshop,
Semmering;
02.10.2009
- 03.10.2009.
R. Radis, E. Kozeschnik:
"Numerical Simulations of the Precipitation Kinetics of gamma' in UDIMET 720 Li using the Thermo-Kinetic Software MatCalc";
Vortrag: Modeling Seminar UBC,
University of British Columbia, Vancouver, Kanada;
31.03.2010.
R. Radis, E. Kozeschnik:
"Numerische Simulation der AlN Ausscheidung in Stahl";
Vortrag: 57. Metallkunde Kolloquium,
Lech am Arlberg;
11.04.2011
- 13.04.2011.
R. Radis, E. Kozeschnik:
"The Precipitation Kinetics of Nb(C,N) in Plastically Deformed Microalloyed Steel";
Vortrag: Euromat 2011,
Montpellier;
12.09.2011
- 15.09.2011.
R. Radis, E. Kozeschnik, C. Sommitsch, N. Enzinger, C. Schlacher, P. Mayr:
"Loss of ductility caused by AlN precipitates in Hadfield steel";
Hauptvortrag: THERMEC 2011, International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS Processing, Fabrication, Properties, Applications,
Quebec - Canada;
01.08.2011
- 05.08.2011.
R. Radis, M. Stockinger, M. Hagspiel, C. Sommitsch, E. Kozeschnik:
"The effect of grain size evolution during solution heat treatment on δ-phase precipitation in ATI ALLVAC 718 PLUS";
Vortrag: THERMEC 2013,
Las Vegas;
02.12.2013
- 06.12.2013.
H. Radlwimmer, P. Wiehoff, S. Ilie, J. Six, E. Kozeschnik:
"Computational and experimental analysis of hot ductility during continuous casting of micro-alloyed steel";
Vortrag: THERMEC´2016,
Graz;
29.05.2016
- 03.06.2016.
H. Radlwimmer, P. Wiehoff, T. Wojcik, J. Six, S. Ilie, E. Kozeschnik:
"Influence of different cooling regimes on the hot ductility of continuously cast micro-alloyed steel";
Vortrag: EUROMAT 2017,
THESSALONIKI;
17.09.2017
- 22.09.2017.
S. Rafiezadeh, A. Falahati, E. Kozeschnik:
"Simulation of microstructure evolution during homogenization of electromagnetic cast ingots of 7050 aluminium alloys";
Vortrag: EUROMAT 2015,
Warszawa;
20.09.2015
- 24.09.2015.
M. Rath:
"Modeling approaches for computer simulation of time-temperatur-transformation (TTT) diagrams of steels";
Vortrag: 8th European Doctoral Meeting,
Budapest, Ungarn;
13.01.2014
- 14.01.2014.
M. Rath:
"Modeling of grain boundary precipitation in 718-type Nickel-base superalloys";
Vortrag: X. seminar of Central European PhD students in Material Science,
Kosice;
04.04.2016
- 06.04.2016.
M. Rath, H. Buken, E. Kozeschnik:
"Multi-class modeling of microstructure evolution during high-temperature deformation of Ni-base alloys - Theory and Application";
Vortrag: 62. Metallkunde Kolloquium,
Lech am Arlberg (eingeladen);
11.04.2016
- 13.04.2016.
M. Rath, E. Kozeschnik:
"Coupled grain growth and precipitation modeling in multi-phase systems";
Vortrag: 5th International Conference on Recrystallization and Grain Growth,
Sydney, Australia;
05.05.2013
- 10.05.2013.
M. Rath, A. Krumphals, M. Stockinger, E. Kozeschnik:
"Microstructural Modelling of Thermo-mechanically Processed Ni-base Superalloys";
Vortrag: 6th International Conference on Recrystallization and Grain Growth,
Pittsburgh;
17.07.2016
- 21.07.2016.
M. Rath, E. Povoden-Karadeniz, E. Kozeschnik:
"A thermodynamic description for the new η-phase Ni6AlNb";
Vortrag: EUROMAT 2015,
Warszawa;
20.09.2015
- 24.09.2015.
M. Rath, E. Povoden-Karadeniz, E. Kozeschnik:
"A thermodynamic description for the new η‐phase Ni6AlNb";
Poster: EUROMAT 2015,
Warszawa;
20.09.2015
- 24.09.2015.
T. Rath, K. Seidler, R. Addison, E. Holzhausen, J. Stampfl:
"An ivory-like material for stereolithography based additive manufacturing";
Vortrag: EUROMAT 2021,
Online;
13.09.2021
- 17.09.2021.
T. Rath, K. Seidler, R. Addison, E. Holzhausen, J. Stampfl:
"Substituting Ivory with a 3D-printable Material";
Vortrag: 5th Bioinspired Materials 2020,
Irsee/Online;
16.03.2020
- 19.03.2020.
T. Rath, B. Steyrer, R. Addison, E. Holzhausen, J. Stampfl:
"Developing a new substitute for ivory using lithography based additive manufacturing";
Poster: Euromat 2019,
Stockholm;
01.09.2019
- 05.09.2019.
A. Redermeier:
"Free Energy Calculation From Lattice Monte Carlo";
Vortrag: 4th ViCoM Workshop,
Schlaining;
11.12.2012
- 12.12.2012.
A. Redermeier:
"Interfacial free energies from Monte Carlo simulations";
Vortrag: 5th ViCoM Workshop,
Schlaining;
12.11.2013
- 13.11.2013.
A. Redermeier, T. Ebner, E. Kozeschnik:
"Revised CALPHAD modeling of the cluster phase in Al-Mg-Si alloys";
Poster: International Conference Integrated Computational Materials, Process and Product Engineering 2019,
Leoben;
21.11.2019
- 22.11.2019.
A. Redermeier, E. Kozeschnik:
"Interfacial free energies from Lattice Monte Carlo simulations";
Vortrag: 8th Seminar of Central European PhD Students: Research in Material Science,
Eötvös Lorand University, Budapest;
13.01.2014
- 14.01.2014.
A. Redermeier, E. Kozeschnik:
"Interfacial free energies in the FexCu1-x system from Monte Carlo simulations";
Vortrag: ViCoM Young Researchers Meeting,
Wien;
22.04.2014
- 23.04.2014.
A. Redermeier, E. Povoden-Karadeniz, E. Kozeschnik:
"First principles aided thermodynamic modeling of TCP phases in Ni-base superalloys";
Vortrag: X. seminar of Central European PhD students in Material Science,
Kosice;
04.04.2016
- 06.04.2016.
A. Redermeier, E. Povoden-Karadeniz, E. Kozeschnik:
"Thermodynamic description of TCP phases in commercial Ni-base superalloys";
Vortrag: EUROMAT 2015,
Warszawa;
20.09.2015
- 24.09.2015.
A. Redermeier, E. Povoden-Karadeniz, E. Kozeschnik:
"Thermodynamic description of TCP phases in commercial single crystal Ni-base superalloys with special emphasis on the P-phase";
Vortrag: Modelling and Simulation of Superalloys 2017,
Bochum, Deutschland;
29.03.2017
- 31.03.2017.
A. Redermeier, D. Reith, T. Kerscher, R. Podloucky, E. Kozeschnik:
"Cu precipitation in Fe - From first-principles to cluster properties";
Poster: ViCoM Young Researchers Meeting,
Wien;
22.04.2014
- 23.04.2014.
A. Redermeier, T. Wojcik, T. Ebner, E. Kozeschnik:
"Evolution of meta-stable phases in Al-Mg-Si alloys - Comparison of thermokinetic simulations and experimental findings";
Vortrag: Euromat 2019,
Stockholm;
01.09.2019
- 05.09.2019.
G. Requena:
"Creep tests on particle and short fiber reinforced Al-alloys";
Vortrag: Seminar on "Modern Light Metals",
Charles University Prague;
04.03.2004
- 05.03.2004.
G. Requena:
"Isothermes und thermo-zyklisches Kriechen von teilchenverstärktem Aluminium";
Vortrag: Seminar über Metal Matrix Composites MMC , TU Chemnitz,
Chemnitz/Deutschland (eingeladen);
12/2006.
G. Requena:
"Kriechen von diskontinuierlich verstärkten Al-Legierungen bei isothermen und zyklischen Temperaturbelastungen";
Vortrag: Sitzung des DGM-Fachausschusses "Metallische Verbundwerkstoffe und zellulare Metalle",
Friedrichshafen (Deutschland);
18.11.2004.
G. Requena:
"Kriechen von diskontinuierlich verstärkten Al-Legierungen bei isothermer und zyklischer Temperaturbelastung";
Vortrag: Sitzung des ASMET-Fachausschusses für MMC-Verbunde und zellulare Metalle,
Slowakische Akademie der Wissenschaften Bratislava;
22.11.2004.
G. Requena:
"Linking properties and 3D architecture in multiphase engineering materials";
Hauptvortrag: LCG Seminar,
Ecole des Mines St Etienne (eingeladen);
01.12.2012.
G. Requena:
"Linking properties and 3D architecture in multiphase engineering materials";
Hauptvortrag: Mateis Seminar,
INSA Lyon - France (eingeladen);
29.05.2012.
G. Requena:
"Linking properties and 3D architecture in multiphase engineering materials";
Hauptvortrag: Windmannstättentagung 2012,
Linz (eingeladen);
06.11.2012
- 08.11.2012.
G. Requena:
"Linking properties and architecture in heterogeneous light materials";
Vortrag: Mini Symposium on Rising Star Programm,
Erlangen - Deutschland (eingeladen);
09.06.2009.
G. Requena:
"The effect of the interconnectivity of rigid phases in cast Al-Si alloys";
Vortrag: Sitzung des Fachausschusses für Metallmatrix-Verbundwerkstoffe und zellulare Metalle - ASMET,
Graz;
13.10.2010
- 14.10.2010.
G. Requena:
"Time-resolved studies of engineering materials using hard X-rays";
Hauptvortrag: Materials Science, Imaging and Dynamics at XFEL.EU,
Hamburg - Deutschland (eingeladen);
10.12.2012
- 11.12.2012.
G. Requena:
"Tomography of heterogeneous materials and residual stress measurements by synchrotron and neutron diffraction";
Vortrag: Austrian Cuban School on Material Science,
Havana - Kuba;
18.11.2009
- 21.11.2009.
G. Requena, Z. Asghar, H.P. Degischer, P. Cloetens:
"3D Study of Aluminides in Piston Alloys by Means of Light Optical and Synchrotron Tomography";
Vortrag: 43. Metallographie-Tagung 2009 Materialographie,
Aachen - Deutschland;
16.09.2009
- 18.09.2009.
G. Requena, P. Cloetens, W. Altendorfer, C. Poletti, D. Tolnai, F. Warchomicka, H.P. Degischer:
"Sub-micrometer holotomography of multiphase metals";
Vortrag: Metallkunde Kolloquium Lech Arlberg,
Lech;
12.04.2010
- 14.04.2010.
G. Requena, P. Cloetens, W. Altendorfer, C. Poletti, D. Tolnai, F. Warchomicka, H.P. Degischer:
"Sub-micrometer holotomography of multiphase metals";
Poster: Journées Annuelles de la SF2M 2010,
Paris, Frankreich;
22.06.2010
- 24.06.2010.
G. Requena, P. Cloetens, W. Altendorfer, D. Tolnai, C. Poletti, F. Warchomicka, H.P. Degischer:
"ub-µm synchrotron tomography of multiphase metals using Kirkpatrick-Baez optics";
Hauptvortrag: Materials Science in the age of nano,
Havana - Kuba (eingeladen);
23.11.2009
- 28.11.2009.
G. Requena, H.P. Degischer:
"Isothermal Creep Resistance of Discontinuously Reinforced Al-Alloys";
Vortrag: Werkstoffwoche 2004,
München;
21.09.2004
- 23.09.2004.
G. Requena, F. Lasagni, H.P. Degischer:
"Lokale Verformung in diskontinuierlich verstärktem Aluminium";
Poster: 14. DGM Symposium Verbundwerkstoffe und Werkstoffverbunde,
Wien;
02.07.2003
- 04.07.2003.
G. Requena, E. Marks, E. Boller:
"Evolution of the Connectivity of the Phases in a Short Fibre reinforced Al-piston Alloy during Creep";
Vortrag: European Synchrotron Radiation Facility Users' Day,
Grenoble (eingeladen);
05.02.2008
- 07.02.2008.
G. Requena, E. Marks, E. Boller:
"Evolution of the Connectivity of the Phases in a Short Fibre reinforced Al-piston Alloy during Creep";
Vortrag: ESRF Users' Meeting,
Grenoble - Frankreich (eingeladen);
05.02.2008
- 07.02.2008.
G. Requena, E. Marks, H.P. Degischer:
"Creep resistance of SFR-Al increasing with exposure time";
Vortrag: HETMAT Seminar,
Wien;
06.03.2008
- 07.03.2008.
G. Requena, E. Marks, H.P. Degischer, E. Boller:
"Enhanced Creep Resistance by 3D connectivity of short fibre reinforcement in AlSi alloys";
Vortrag: 5th International Conference on Cree, Fatigue and Creep-Fatigue Interaction,
Kalpakkam, India (eingeladen);
24.09.2008
- 26.09.2008.
G. Requena, M. Schöbel:
"Thermal expansion, internal stress & void formation in AlSiC";
Vortrag: 2nd Seminar on MODERN LIGHT METALS for doctoral students of Charles University Praha and University of Technology Vienna/IMST,
TU Wien;
11.01.2007
- 13.01.2007.
G. Requena, M. Schöbel, E. Marks, B. Seiser, G. Fiedler, W. Altendorfer, H.P. Degischer:
"3-D characterization of composite materials";
Vortrag: Materials Science and Engineering,
Nürnberg, Deutschland;
01.09.2008
- 04.09.2008.
G. Requena, D. Telfser, P. Prader, H.P. Degischer:
"Deformation of Particle Reinforced AA6061 Aluminium Alloy exposed to Tensile Creep and to Thermal Cycling Creep";
Poster: Junior Euromat 2002,
Lausanne (Schweiz);
09/2002.
H. Riedl, T. Glechner, N. Koutná, T. Wojcik, S. Kolozsvári, D. Holec, P. Felfer, P.H. Mayrhofer:
"How to improve the oxidation resistance of ultra-high temperature Ta-C coatings: An ab initio guided approach";
Vortrag: 14th International Ceramic Congress,
Perugia;
04.06.2018
- 08.06.2018.
H. Riedl, T. Glechner, N. Koutná, T. Wojcik, S. Kolozsvári, D. Holec, P. Felfer, P.H. Mayrhofer:
"Oxidation behavior of superhard Ta-X-C coatings: An ab initio guided approach";
Poster: 16th International Conference on Plasma Surface Engineering,
Garmisch-Partenkirchen;
12.09.2016
- 16.09.2016.
H. Riedl, S. Kagerer, L. Zauner, T. Wojcik, S. Kolozsvári, J Capek, T Kozák, P Zeman, P.H. Mayrhofer:
"Influence of transition metal dopants on the reactive HiPIMS deposition of γ-Al2O3 thin films";
Vortrag: PLATHINIUM (Plasma Thin film International Union Meeting),
Antibes;
13.09.2019
- 17.09.2019.
H. Riedl, B. Kohlhauser, V. Paneta, C.M. Koller, S. Kolozsvári, D. Primetzhofer, P.H. Mayrhofer:
"Influence of Transition Metal Dopants on Target Poisoning and Oxidation Mechanism of Reactively Sputtered γ-Al2O3 Thin Films";
Vortrag: AVS 63rd Symposium & Exhibition,
Nashville, TN, USA;
06.11.2016
- 11.11.2016.
H. Riedl, C.M. Koller, M. Bartosik, S. Kolozsvári, M. Arndt, A. Limbeck, P.H. Mayrhofer:
"Oxidation mechanism in Mo-Si-B/Ti-Al-N multilayer coatings";
Vortrag: 62. Metallkunde Kolloquium,
Lech am Arlberg;
11.04.2016
- 13.04.2016.
H. Riedl, C.M. Koller, S.A. Glatz, J Kalas, P. Polcik, P.H. Mayrhofer:
"Mechanical and tribological properties of arc evaporated Ti(1-x)Al(x)N/Mo(1-x-y)Si(x)B(y) multilayer coatings";
Vortrag: 42nd International Conference on Metallurgical Coatings and Thin Films,
San Diego;
20.04.2015
- 24.04.2015.
H. Riedl, C.M. Koller, S.A. Glatz, J Kalas, P. Polcik, P.H. Mayrhofer:
"Mechanical and tribological properties of arc evaporated Ti1-xAlxN/Mo1-x-ySixBy multilayer coatings";
Vortrag: Symposium 2015 der Österreichischen Tribologischen Gesellschaft (ÖTG),
Wiener Neustadt;
23.11.2015
- 25.11.2015.
H. Riedl, H. Lasfargues, T. Glechner, V. Paneta, D. Primetzhofer, S. Kolozsvári, D. Holec, P.H. Mayrhofer:
"Non-reactively sputtered ultra-high temperature Ta-C coatings";
Vortrag: EUROMAT 2017,
THESSALONIKI;
17.09.2017
- 22.09.2017.
H. Riedl, V. Moraes, C. Fuger, H. Euchner, R Hahn, T. Wojcik, M. Arndt, P. Polcik, P.H. Mayrhofer:
"Is WB2-z a proper Base System for designing Ternary Diboride based Thin Films?";
Vortrag: 46th International Conference on Metallurgical Coatings and Thin Films,
San Diego;
19.05.2019
- 24.05.2019.
F. Riedlsberger, E. Povoden-Karadeniz, B. Gsellmann, B. Sonderegger:
"Modeling of Z-phase formation from disordered precursor nitride-phases MX and M2X during heat-treatment and creep exposure of martensitic Z-steel";
Vortrag: Euromat 2019,
Stockholm;
01.09.2019
- 05.09.2019.
M. Rodríguez Ripoll, F. Heindl, M. Jech, C. Lechner, Ch. Habersohn, F. Bleicher, B. Adjassoho, E. Kozeschnik, S. Gössinger, C. Bauer:
"Improving the tribological properties of functional surfaces using machine hammer peening";
Vortrag: 19th International Colloquium Tribology,
Stuttgart, Ostfildern;
21.01.2014
- 23.01.2014.
M. Rodríguez-Hortalá et al.:
"Acoustic emission signals produced during deformation of carbon fibre reinforced polymers (CFRP)";
Vortrag: 5th Seminar for PhD students "Research in progress on metallic materials",
Graz (eingeladen);
08.11.2010
- 09.11.2010.
M. Rodríguez-Hortalá, G. Requena, F. Sket, J. Molina-Aldareguia, E. Maire, L. Salvo, M. Scheel:
"3D Damage characterisation during sequential tensile loading of a multidirectional carbon fibre reinforced epoxy laminate (CFRP)";
Vortrag: European Congress and Exhibition on Advanced Materials and Processes: EUROMAT 2013,
Sevilla (Spanien);
08.09.2013
- 13.09.2013.
M. Rodríguez-Hortalá, G. Requena, F. Sket, J. Molina-Aldareguia, E. Maire, L. Salvo, M. Scheel:
"In-situ synchrotron microtomography during tensile deformation of a ± 45° cross-ply carbon fibre reinforced epoxy laminate";
Poster: Conference on Industrial Computed Tomography,
Wels;
19.09.2012
- 21.09.2012.
M. Rodríguez-Hortalá, D. Salaberger, S. Hernández, H.P. Degischer:
"Mechanical and structural characterisation of defects in CFRP materials";
Poster: Fachtagung für Industrielle Computertomografie,
FHOÖ Campus Wels;
27.09.2010
- 29.09.2010.
M. Roy, T. Koch, A. Pauschitz, A. Cavalairo:
"Nano indentation and nano scratch behaviour of reactive sputtered deposited W-S-C films";
Vortrag: RSD 2007, Symposium on Reactive Sputter Deposition,
Leoben;
06.12.2007
- 07.12.2007.
M. Rumpler, A. Wöß, F. Varga, J. Stampfl, N. Fratzl-Zelman, P. Roschger, P. Fratzl, K. Klaushofer:
"Porous hydroxyapatite scaffolds constructed by microstereolithography are suitable substrates for osteoblasts";
Poster: Progress in Bone and Mineral Reseach 2003,
Wien;
27.11.2003
- 29.11.2003.
S. Sakhawat:
"Mechanical and microstructural characterization of precipitation hardening stainless steel";
Vortrag: Seminar Research in progress on metallic materials,
Bratislava;
02.10.2008
- 03.10.2008.
S. Sakhawat, A. Falahati, H.P. Degischer:
"Microstructural Changes in the Heat Affected Zone of a Precipitation Hardening Cr-Steel";
Vortrag: 43. Metallographie-Tagung 2009 Materialographie,
Aachen;
16.09.2009
- 18.09.2009.
S. Sayer:
"Guiding vascularization via multiphoton lithography";
Vortrag: Online Conference Joint Meeting on Vascular Biology, Inflammation and Thrombosis,
Vienna;
13.05.2020
- 14.05.2020.
S. Sayer, M. Markovic, T Zandrini, M. Lunzer, J. Van Hoorick, S. Van Vlierberghe, A. Ovsianikov, W Holnthoner:
"Guiding vascularization via high-resolution multiphoton lithography";
Vortrag: Online Conference Joint Meeting on Vascular Biology, Inflammation and Thrombosis 2020,
Online;
13.05.2020
- 14.05.2020.
M. Schmidtchen, A. Rimnac, P. Warczok, E. Kozeschnik, C. Bernhard, S. Bragin, R. Kawalla, B. Linzer:
"Investigation of the influence of the chemical composition of C-Mn steel grades on the microstructure homogeneity during hot rolling in continuous rolling mills using a fast layer model";
Vortrag: Workshop des COMET-K2 Kompetenzzentrums MPPE,
Leoben;
03.11.2015
- 05.11.2015.
W. Schneider, T. Poeste, H. Freydank, A. Pyzalla:
"Stress and Strain Analyses: The Refurbishment of the Materials Research Diffractometer E3 at BENSC";
Poster: ECNS 2003,
Montpellier;
03.09.2003
- 06.09.2003.
M. Schöbel:
"Crystallographic orientation of Al3(Sc,Zr) precipitates after ECAP";
Vortrag: 2nd Seminar on MODERN LIGHT METALS for doctoral students of Charles University Praha and University of Technology Vienna/IMST,
TU Wien;
11.01.2007
- 13.01.2007.
M. Schöbel:
"Innere Spannungen und Porenverteilung in AlSiC und AlDi Verbundwerkstoffen";
Vortrag: Metallkunde-Kolloquium,
Lech am Arlberg;
16.04.2007
- 18.04.2007.
M. Schöbel:
"Kohärenz von Al3(ZR,Sc) Ausscheidungen in Al-Zn-Mg Legierung nach hohen Verformungsgraden";
Vortrag: Seminar "Heterogeneous Materials",
Wien;
04.03.2008
- 05.03.2008.
M. Schöbel:
"Residual stress evaluation and texture analysis by x-ray diffraction";
Vortrag: Seminar "Heterogeneous Materials",
Budapest;
22.05.2008
- 23.05.2008.
M. Schöbel:
"Residual stresses and voids in diamond reinforced MMCs";
Vortrag: Extremat Warschau,
Warschau/Polen;
15.10.2007
- 17.10.2007.
M. Schöbel:
"Residual stresses in Al-Diamond based heat sinks";
Vortrag: ExtreMat SP2 Meeting,
Jülich;
23.10.2006
- 26.10.2006.
M. Schöbel:
"The effects of microscopic voids on the thermal expansion behaviour of AlSiC metal matrix composites";
Vortrag: ExtreMat SP2,
Athen;
15.05.2006
- 18.05.2006.
M. Schöbel:
"Thermal expansion, internal stresses & void formation in AlSiCp composites";
Vortrag: Euromat 2007,
Nürnberg/ Deutschland;
10.09.2007
- 13.09.2007.
M. Schöbel:
"Tomography and residual stresses in heat sink MMC";
Vortrag: Seminar Research in progress on metallic materials,
Bratislava;
02.10.2008
- 03.10.2008.
M. Schöbel, W. Altendorfer, H.P. Degischer, T. Buslaps, M. di Michiel:
"Residual stresses and void kinetics in particle reinforced metal matrix composites during thermal cycling";
Poster: Junioreuromat 2008,
Lausanne;
14.07.2008
- 17.07.2008.
M. Schöbel, W. Altendorfer, G. Fiedler, H.P. Degischer, T. Buslaps, M. Hofmann:
"Residual stresses in metal matrix composites for heat sink applications during thermal cycling";
Vortrag: ICRS Conference 2008,
Denver CO;
04.08.2008
- 10.08.2008.
M. Schöbel, W. Altendorfer, J. Jonke, H.P. Degischer:
"Internal stresses and thermal fatigue in MMC for heat sink applications";
Vortrag: Hetmat - Heterogeneous Materials" European Research Group,
Budapest;
28.05.2009
- 29.05.2009.
M. Schöbel, W. Altendorfer, J. Jonke, G. Fiedler, H.P. Degischer:
"Internal stresses and thermal fatigue damage in MMC for heat sink applications";
Vortrag: ExtreMat SP2 Meeting,
Lausanne;
28.06.2009
- 29.06.2009.
M. Schöbel, H. J. Böhm, H.P. Degischer, S. Nogales:
"Particle reinforced materials for heat sink applications interface bonding and conductivity modeling";
Poster: Hannover Messe,
Hannover;
21.04.2008
- 23.04.2008.
M. Schöbel, H.P. Degischer:
"In situ thermal fatigue studies on monofilament reinforced copper composites for heat sink applications at high temperatures";
Vortrag: EUROMAT 2009,
Glasgow;
07.09.2009
- 10.09.2009.
M. Schöbel, H.P. Degischer:
"Orientierungsbeziehungen von Al3(Sc,Zr) Ausscheidungen zu einer stark deformierten Al Matrix";
Vortrag: Metallkunde Kolloquium Lech Arlberg,
Lech;
14.04.2008
- 16.04.2008.
M. Schöbel, H.P. Degischer:
"Synchrotron tomography and neutron diffraction on metal matrix composites for heat sink applications";
Vortrag: International Doctoral Seminar - Faculty of Materials Science and Technology STU in Trnava (TU Bratislava),
Bratislava;
17.09.2008
- 19.09.2008.
M. Schöbel, H.P. Degischer:
"Thermal fatigue of diamond reinforced metals investigated by synchrotron tomography and neutron diffraction";
Vortrag: EUROMAT 2009,
Glasgow;
07.09.2009
- 10.09.2009.
M. Schöbel, H.P. Degischer, W. Altendorfer, T. Buslaps, M. di Michiel:
"Thermal fatigue in particle reinforced composites for heat sink applications";
Vortrag: 2nd Fatigue Symposium Leoben,
Leoben;
23.04.2008
- 24.04.2008.
M. Schöbel, H.P. Degischer, A. Brendel, R. Wimpory, M. Di Michiel:
"Thermal stresses and fatigue damage in monofilament reinforced copper composites for heat sink applications in divertor elements";
Poster: FEMaS (First International Conference on Fusion Energy Materials Science),
Rosenheim;
09.05.2011
- 13.05.2011.
M. Schöbel, H.P. Degischer, A. Brendel, R. Wimpory, M. Di Michiel:
"Thermal stresses and fatigue damage in monofilament reinforced Cu for heat sink applications in fusion reactor systems";
Vortrag: 2nd International Workshop on Thermo-Mechanical Fatigue (TMF),
Berlin;
11.05.2011
- 13.05.2011.
M. Schöbel, H.P. Degischer, P. Dobron, M. Hofmann, R. Wimpory, P. Cloetens:
"Micro stresses and voids in diamond particle reinforced aluminum composites for heat sink applications";
Vortrag: MMC Arbeitskreis,
Karlsruhe (eingeladen);
02.11.2010
- 03.11.2010.
M. Schöbel, H.P. Degischer, G. Fiedler, W. Altendorfer:
"Residual stresses and their effects on thermal fatigue in monofilament reinforced composites for heat sink applications in novel fusion reactor systems";
Poster: NRJ Konference Pettenn NL,
Petten;
16.04.2008
- 18.04.2008.
M. Schöbel, H.P. Degischer, V. Paffenholz, R. Wimpory, M. Di Michiel:
"Innere Spannungen und thermische Ermüdung in Monofilament verstärkten Kupfer Verbundwerkstoffen als Hochleistungswärmeleiter für Fusionsreaktoren";
Vortrag: 18. DGM Symposium Verbundwerkstoffe und Werkstoffverbunde,
Chemnitz;
30.03.2011
- 01.04.2011.
M. Schöbel, H.P. Degischer, V. Paffenholz, R. Wimpory, M. Di Michiel:
"Internal stresses and thermal fatigue damage in monofilament reinforced copper composites for fusion reactor applications";
Vortrag: Materials science and engineering MSE 2010,
Darmstadt;
24.08.2010
- 26.08.2010.
M. Schöbel, H.P. Degischer, G. Requena, W. Altendorfer:
"Void kinetics in AlSiCp and AlCDp MMC during thermal cycling";
Vortrag: Seminar "Heterogeneous Materials",
Wien;
06.03.2008
- 07.03.2008.
M. Schöbel, H.P. Degischer, S. Vaucher, M. Hofmann, P. Cloetens:
"Reinforcement architectures and thermal fatigue in diamond particle reinforced aluminium";
Vortrag: 5th European Conference on Neutron Scattering (ECNS),
Prag;
17.07.2011
- 21.07.2011.
M. Schöbel, H.P. Degischer, R. Wimpory, M. Hofmann, M. di Michiel:
"Internal stresses and thermal fatigue damage in metal matrix composites investigated by neutron and synchrotron radiation";
Vortrag: Mecasens V,
Mito Japan;
10.11.2009
- 13.11.2009.
M. Schöbel, G. Fiedler, M. Hofmann:
"Reinforcement architecture and their effects on thermal fatigue of metal matrix composites for heat sinks investigated by neutron diffraction and synchrotron tomography";
Poster: Deutsche Neutronenstreu Tagung 2008,
Garching;
15.09.2008
- 17.09.2008.
M. Schöbel, G. Fiedler, D. Tolnai, H.P. Degischer, S. Vaucher, L. Salvo:
"Void formation in particle reinforced composites during solidification";
Poster: ESRF Users' Meeting,
Grenoble - Frankreich;
08.02.2011
- 09.02.2011.
M. Schöbel, S. Großeiber, J. Jonke, G. Requena, M. Hofmann, R. Wimpory, S. Ilie:
"Residual Stresses in Continuously Cast Steel Slabs";
Poster: EUROMAT 2013,
Sevilla;
08.09.2013
- 13.09.2013.
M. Schöbel, J. Jonke, V. Paffenholz, M. Di Michiel, M. Peel, R. Wimpory, H.P. Degischer:
"Internal stresses and thermal fatigue in SiC fiber reinforced Cu for heat sink applications in novel fusion reactor systems";
Poster: ESRF user meeting,
Grenoble;
09.02.2010
- 11.02.2010.
M. Schöbel, J. Jonke, V. Paffenholz, A. Herrmann:
"Thermische Ermüdung in SiC-/W-Faser verstärktem Kupfer für Hochleistungswärmeleiter in Fusionsreaktoren";
Vortrag: Metallkunde Kolloquium Lech Arlberg,
Lech;
14.04.2009
- 16.04.2009.
M. Schöbel, G. Requena, W. Altendorfer, H.P. Degischer:
"Internal stresses and voids in SiC particle reinforced Al composites";
Vortrag: Institute Seminar,
Bochum (eingeladen);
02.03.2010.
M. Schöbel, G. Requena, H.P. Degischer, T. Buslaps, M. Di Michiel:
"Residual stresses and void kinetics in AlSiCp MMCs during thermal cycling";
Vortrag: MECA SENS IV - Conference on Stress Evaluation,
Wien;
24.09.2007
- 26.09.2007.
M. Schöbel, G. Requena, H.P. Degischer, T. Buslaps, M. di Michiel:
"Residual stresses and void kinetics in particle reinforced metal matrix composites during thermal cycling";
Poster: ESRF user meeting,
Grenoble;
05.02.2008
- 07.02.2008.
M. Schöbel, D. Tolnai, G. Fiedler, G. Requena, H.P. Degischer, S. Vaucher, L. Salvo:
"In-situ Tomographie der Erstarrung einer AlSi7-Matrix zwischen SiC-Partikeln in Al-SiC";
Vortrag: MMC Arbeitskreis,
Aalen;
15.11.2011.
M. Schöbel, S. Vaucher, P. Cloetens, H.P. Degischer:
"In-situ Tomographie der Erstarrung der AlSi7-Matrix zwischen SiC-Partikeln in AlSiC";
Vortrag: Metallkunde Kolloquium Lech Arlberg,
Lech;
11.04.2011
- 13.04.2011.
M. Schöbel, S. Vaucher, H.P. Degischer:
"Innere Spannungen und Poren in Diamant verstärktem Aluminium untersucht mit Neutronen Diffraktion und Synchrotron Tomografie";
Vortrag: Metallkunde Kolloquium Lech Arlberg,
Lech;
14.04.2009
- 16.04.2009.
M. Schöbel, S. Vaucher, M. Hofmann, T. Buslaps, H.P. Degischer:
"Reinforcement Architecture and their Effects on Thermal Fatigue of Metal Matrix Composites";
Poster: ESRF user meeting,
Grenoble;
04.02.2009.
M. Schöbel, L Weber, P. Dobron, R. Wimpory, H.P. Degischer:
"Diamond reinforced metal matrix composites";
Vortrag: Mecasens,
Hamburg;
05.09.2011
- 09.09.2011.
J.-A. Schönherr, S. Baumgartner, M. Hartmann, J. Stampfl:
"High-precision Lithography-based Ceramic Manufacturing (LCM)";
Vortrag: Materials Science and Engineering - MSE 2018,
Darmstadt;
26.09.2018
- 28.09.2018.
J.-A. Schönherr, S. Baumgartner, J. Stampfl:
"Lithography-based Additive Manufacturing of high-precision ceramic parts";
Vortrag: Jahrestagung der Deutschen Gesellschaft für Biomaterialien,
Würzburg;
09.11.2017
- 11.11.2017.
J.-A. Schönherr, R. Gmeiner, A. R. Boccaccini, J. Stampfl:
"Lithography-based Additive Manufacturing of High Strength Bioactive Glass and Glass Ceramics for Medical Applications";
Poster: EURO BioMAT 2015,
Weimar;
21.04.2015
- 22.04.2015.
J.-A. Schönherr, R. Gmeiner, A. Boccaccini, J. Stampfl:
"Additive Herstellung hochfester Biogläser und Biokeramiken für medizinische Anwendungen";
Vortrag: Rapid.Tech 2015,
Erfurt;
10.06.2015
- 11.06.2015.
J.-A. Schönherr, R. Gmeiner, A. Boccaccini, J. Stampfl:
"Stereolithography-based additive manufacturing of high strength bioactive glass scaffolds";
Vortrag: Vienna Young Scientists Symposium (VSS) 2015,
Wien;
25.06.2015
- 26.06.2015.
J.-A. Schönherr, M. Pfaffinger, R. Gmeiner, A. Boccaccini, J. Stampfl:
"Generative Herstellung hochfester Biogläser und Biokeramiken für medizinische Anwendungen";
Vortrag: Medica,
Düsseldorf;
16.11.2015
- 19.11.2015.
J.-A. Schönherr, J. Stampfl:
"The Additive Manufacturing Teaching Factory: Hands-on Learning Nuggets for Educating a Future Generation of European AM Specialists";
Vortrag: Online Educa Berlin,
Berlin, Deutschland;
30.11.2020
- 04.12.2020.
M. Schuster, S.X. Chen, R. Liska, M. Rumpler, C. Turecek, F. Varga, J. Stampfl:
"Development of Biodegradable Photopolymers for Bone Tissue Engineering";
Poster: RadTech Europe 2005,
Barcelona, Spain;
18.10.2005
- 20.10.2005.
M. Schuster, S.X. Chen, R. Liska, C. Turecek, F. Varga, J. Stampfl:
"Photopolymerizable Biopolymers for Rapid Prototyping of Cellular Bone Repleacement Meterials";
Poster: RadTech Europe 2005,
Barcelona, Spain;
18.10.2005
- 20.10.2005.
M. Schuster, C. Turecek, B. Kaiser, F. Varga, J. Stampfl, R. Liska:
"Biophotopolymers for Rapid Prototyping of Cellular Bone Replacement Materials";
Vortrag: Junior Scientist Conference,
Wien;
19.04.2006
- 21.04.2006.
M. Schuster, C. Turecek, F. Varga, H. Lichtenegger, J. Stampfl, R. Liska:
"Development of bone replacement materials using stereolithography";
Poster: MRS Spring Meeting,
an Francisco;
09.04.2007
- 13.04.2007.
M. Schuster, C. Turecek, F. Varga, J. Stampfl, R. Liska:
"3D-shaping of biodegradable photopolymers for hard tissue replacement";
Vortrag: EMRS Spring Meeting 2007,
Strasbourg, France;
28.05.2007
- 01.06.2007.
R. Schuster, G Habler, L. Tiede, O. Ageeva, R. Abart:
"Influence of the reaction interface orientation on the microstructure and texture of spinel formed by topotactic growth on corundum";
Vortrag: 3rd European Mineralogical Conference,
Online;
29.08.2021
- 02.09.2021.
R. Schuster, T. Wojcik, E. Povoden-Karadeniz:
"Deformation Induced Precipitation in Microalloyed Al-Cu";
Vortrag: Materials Science & Technology 2020 - Online Conference,
Pittsburgh;
02.11.2020
- 06.11.2020.
R. Schuster, T. Wojcik, E. Povoden-Karadeniz:
"Deformation Induced Precipitation in Microalloyed Al-Cu";
Vortrag: Materials Science & Technology 2020,
Online;
02.11.2020
- 06.11.2020.
M. Schwentenwein, C. Heller, X.H. Qin, F. Varga, J. Stampfl, R. Liska:
"Additive Manufacturing Technologies for 3D Fabrication of Biocompatible and Biodegradable Photopolymers";
Vortrag: Materials Science and Engineering,
Darmstadt, Germany;
24.08.2010
- 26.08.2010.
K. Seidler, S. Baudis, S. Ligon, C. Grasl, M. Arras, H. Schima, H. Bergmeister, B. Winter, T. Koch, J. Stampfl, R. Liska:
"Biocompatible and biodegradable thermoplastic urethane Elastomers for electrospinning of vascular grafts";
Poster: 1st P2M Networking Conference,
Obernai, F;
11.11.2011
- 14.11.2011.
S. Seidler:
"Biokompatible Werkstoffe - Möglichkeiten und Grenzen am Beispiel des Kunststoffes Polyethylen";
Vortrag: Seminar des Institutes für Allgemeine Physik,
TU Wien (eingeladen);
22.05.2007.
S. Seidler:
"Hierarchisch strukturierte Materialien";
Vortrag: 1. Wiener Biomaterialsymposium,
Wien;
04.11.2004
- 05.11.2004.
S. Seidler:
"Macro - Micro - Nano: Scaling Problems in Mechanical Testing";
Vortrag: 1st Central European Workshop on Polymer Science and Technology,
Zlin, Czech Republic (eingeladen);
28.06.2006
- 29.06.2006.
S. Seidler:
"Makro - Mikro - Nano: Werkstoffcharakterisierung und Prüfung";
Vortrag: Vortragsreihe Know-how der TU Wien für die Wirtschaft: neue Werkstoffe: Entwicklung - Charakterisierung - Anwendung,
Wirtschaftskammer Wien;
22.06.2005.
D. Shakhvorostov, H. Pinto, A. Pyzalla, S. Enders, K. Pöhlmann, M. Scherge:
"Structure, hardness and stress state analysis on metal-metal tribocontacts with oil lubrication";
Vortrag: DGM-Tagung Reibung und Verschleiß,
Fürth (Deutschland);
10.03.2004
- 12.03.2004.
Y.V. Shan, E. Kozeschnik:
"Monte Carlo Study of Interstitial Diffusion in the Presence of Solute Atom Traps";
Vortrag: EUROMAT 2017,
THESSALONIKI;
17.09.2017
- 22.09.2017.
Y.V. Shan, W. Mayer, E. Kozeschnik:
"Thermodynamics of Carbon Trapping at Dislocations in Martensite";
Poster: Calphad XLIII,
Changsha, VR China;
02.06.2014
- 06.06.2014.
Y.V. Shan, R. Sowa, J. Svoboda, F.D. Fischer, E. Kozeschnik:
"Influence of stress relaxation on the coarsening kinetics of incoherent precipitates";
Vortrag: Euromat 2019,
Stockholm;
01.09.2019
- 05.09.2019.
Y.V. Shan, J. Svoboda, F. Fischer, E. Kozeschnik:
"Diffusion of Interstitial Components in Systems with Traps";
Vortrag: Materials Science and Engineering - MSE 2012,
Darmstadt;
25.09.2012
- 27.09.2012.
J. Shim, W. Jung, J. Suh, B. Wirth, E. Povoden-Karadeniz, E. Kozeschnik:
"Kinetic simulation of long-term precipitate evolution in heat-resistant alloys";
Vortrag: THERMEC´2016,
Graz;
29.05.2016
- 03.06.2016.
J. Six, T. Wojcik, S. Ilie, E. Kozeschnik:
"Correlation between interparticle distance of precipitates and the high-temperature part of the second ductility minimum of micro-alloyed steels";
Vortrag: ISIJ-VDEh-JK-Symposium on Metallurgy,
Osaka;
12.04.2013
- 20.04.2013.
F. Sket, D. Eyidi, J. L. Garcia, A. Pyzalla:
"The Microstructure Of Co And Ni Binder Phases In Graded Hard Metals And Its Influence On Corrosion Resistance";
Poster: 6. Dreiländertagung 2005,
Davos/ Schweiz;
28.08.2005
- 02.09.2005.
R. Soler, R Hahn, M. Bartosik, C. Kirchlechner, G Dehm, P.H. Mayrhofer:
"Can Superlattice Structures Enhance the Fracture Toughness of Hard Coating?";
Poster: Gordon Research Conferences: Thin Film & Small Scale Mechanical Behavior,
Lewiston, ME;
24.07.2016
- 29.07.2016.
M. Soliman, Y.V. Shan:
"Charakterisierung und physikalisch-basierte Modellierung des Bake-Hardening-Effekts in Dualphasen-Stählen";
Vortrag: TU Clausthal Metallurgie-Kolloquium 2016,
Clausthal-Zellerfeld (eingeladen);
03.11.2016
- 04.11.2016.
B. Sonderegger, E. Kozeschnik:
"On the calculation and impact of phase boundary energies on precipitate kinetics in complex alloys at high temperatures";
Vortrag: THERMEC´2016,
Graz (eingeladen);
29.05.2016
- 03.06.2016.
J. Stampfl:
"3D Druck in der Medizin: Von A(bbaubare Biomaterialien) bis Z(weiphotonenlithographie)";
Vortrag: Print3DFuture,
Wien;
27.03.2014.
J. Stampfl:
"3D Druck mit Licht - Materialien und Anwendungen";
Vortrag: Business Treff " 3D-Druck - Additive Fertigung: Produktion im Wandel",
Wien;
22.10.2015.
J. Stampfl:
"3D-Druck in der industriellen Anwendung - Herausforderungen an die Materialwissenschaft";
Hauptvortrag: 11. Internationaler Leobener Logistik Sommer,
Leoben;
19.09.2013
- 20.09.2013.
J. Stampfl:
"3D-Druck mit Licht: Verfahren und Werkstoffe";
Hauptvortrag: Vorarlberger Techniktag 2014,
Dornbirn (eingeladen);
21.01.2014.
J. Stampfl:
"3D-Druck und Medizin: Potenzial & Innovationen bei Kunststoff und Keramik";
Vortrag: Innovationstag Medizintechnik - Symbiose aus Simulation, 3D-Druck und Prüftechnik,
Krems;
21.08.2018.
J. Stampfl:
"3D-printable materials: Design principles for strong and tough polymers, ceramics and metals";
Hauptvortrag: MAMC 2019,
Örebro;
25.11.2019
- 27.11.2019.
J. Stampfl:
"3D-printable photopolymers for applications in electronics, engineering and biomedicine";
Vortrag: virtual European Symposium of Photopolymer Sciences,
Online;
15.06.2021
- 17.06.2021.
J. Stampfl:
"3D-Strukturierung biofunktioneller Photopolymere";
Vortrag: Kolloquium zur Muskuloskeletalen Regeneration,
Berlin;
25.07.2007.
J. Stampfl:
"3D-Techniken in der Materialkunde";
Vortrag: Habilitationskolloquium,
TU Wien;
20.10.2004.
J. Stampfl:
"Additive Fertigung: Technologien, Materialien, Märkte";
Vortrag: 12. Technologieforum Mostviertel,
Waidhofen an der Ybbs;
25.10.2018.
J. Stampfl:
"Additive Manufacturing for digital dentistry";
Hauptvortrag: MAMC,
Wien;
21.11.2018
- 23.11.2018.
J. Stampfl:
"Additive Manufacturing of photopolymer-based scaffolds";
Vortrag: Sino-German Symposium "Multifunctional Biomaterials and polymer-based controlled drug-release systems",
Berlin;
26.10.2011
- 30.10.2011.
J. Stampfl:
"Biofunktionelle Photopolymere für die Stereolithographie";
Vortrag: Werkstoff-Forum der EUROMOLD,
Frankfurt;
06.12.2007
- 07.12.2007.
J. Stampfl:
"Bioprinter (3D-Drucker für Gewebe und Organe) in der Medizin - aktueller Stand";
Vortrag: Symposium Intensivmedizin und Intensivpflege,
Bremen;
24.02.2016
- 26.02.2016.
J. Stampfl:
"Factories of the Future: ToMax";
Vortrag: A journey into European Factories of the Future,
Graz;
01.12.2016.
J. Stampfl:
"Formgebung metallischer und nichtmetallischer Werkstoffe mit Rapid Prototyping";
Vortrag: 5. Materialphysikalisches Symposium,
Seggau;
05.07.2002
- 07.07.2002.
J. Stampfl:
"Generative Fertigung - Entwicklungstrends von A(bbaubaren Werkstoffen für die Medizin) bis Z(weiphotonenlithographie)";
Vortrag: Rapid Prototyping - Vorsprung durch flexible Produktentwicklung,
Hallein (eingeladen);
02.04.2009.
J. Stampfl:
"Generative Fertigung und Werkstoffprüfung von Polymeren und Keramiken für die Biomedizin";
Vortrag: 7. Werkstoffkongress,
Leoben (eingeladen);
03.12.2009
- 04.12.2009.
J. Stampfl:
"Herstellung von optischen Wellenleitern mit 2-Photonenpolymerisation";
Vortrag: Euromold 2008 - Forum Werkstoffe,
Frankfurt am Main;
03.12.2008
- 06.12.2008.
J. Stampfl:
"High performance materials for lithography based additive manufacturing";
Hauptvortrag: Add+It,
Linz (eingeladen);
11.09.2015
- 12.09.2015.
J. Stampfl:
"High Strength and High Quality Ceramic Parts Through Photolithographic Layered Manufacturing";
Vortrag: Next Generation Material Design by Layered Manufacturing Technologies,
Stanford, USA;
13.11.2018
- 14.11.2018.
J. Stampfl:
"Innovative Materialien für die Stereolithographie";
Vortrag: Werkstoff-Forum der EUROMOLD,
Frankfurt, Germany;
29.11.2006
- 01.12.2006.
J. Stampfl:
"Key IP issues of spinning out deep-tech SMEs";
Vortrag: CIP Forum,
Göteborg;
09.12.2021
- 11.12.2021.
J. Stampfl:
"Lithography based additive manufacturing of ceramic parts";
Hauptvortrag: Biobone Workshop,
Erlangen;
23.01.2013
- 25.01.2013.
J. Stampfl:
"Lithography based additive manufacturing of high-performance ceramic parts";
Hauptvortrag: Ajankohtaisseminaari ja 3D-tulostus näyttely,
Helsinki (eingeladen);
22.05.2013.
J. Stampfl:
"Lithography-based 3D-structuring of biomaterials";
Vortrag: 2nd Erlangen Symposium on Biomaterials,
Erlangen;
18.11.2014
- 19.11.2014.
J. Stampfl:
"Materials for lithography-based additive manufacturing technologies";
Vortrag: Erich-Schmid-Kolloquium, Erich Schmid Institut, ÖAW,
Leoben;
07.12.2010.
J. Stampfl:
"Mechanische Eigenschaften und Abbauverhalten von Biophotopolymeren für die generative Fertigung";
Vortrag: 13. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Halle-Merseburg;
29.06.2011
- 01.07.2011.
J. Stampfl:
"Neue Werktoffe für Rapid Prototyping";
Vortrag: Trends und Innovationen am Rapid Prototyping Sektor,
Waidhofen/Ybbs;
11.06.2003.
J. Stampfl:
"Phocam - Impact and exploitation";
Vortrag: Impact Workshop - Factory of the Future,
Brüssel (eingeladen);
24.03.2014
- 25.03.2014.
J. Stampfl:
"Photopolymerizable Hydrogels for Lithography-Based Additive Manufacturing";
Vortrag: 533. WE-Heraeus-Seminar Advanced Functional Polymers for Medicine,
Bad Honnef;
27.05.2013
- 29.05.2013.
J. Stampfl:
"Polymere und Keramiken für die Additive Fertigung - Möglichkeiten und Herausforderungen";
Hauptvortrag: Production Engineering Graz,
Graz;
13.09.2018.
J. Stampfl:
"Rapid Prototyping - aktuelle Anwendungen und Trends";
Vortrag: Technologie und Gründerforum RIZ Waidhofen,
Waidhofen;
03.05.2005.
J. Stampfl:
"Rapid Prototyping - Märkte und Zukunftschancen, Impulsveranstaltung "Fertigungs- und Prozessoptimierung"";
Vortrag: TZS Gmunden,
Gmunden;
01.08.2003.
J. Stampfl:
"Rapid Prototyping of Biomaterials";
Vortrag: National Taiwan University of Science and Technology,
Taipeh (eingeladen);
04.10.2004.
J. Stampfl:
"Rapid Prototyping of cellular materials";
Vortrag: ETH Zürich,
Zürich, CH;
01.11.2003.
J. Stampfl:
"Rapid Prototyping und Modellierung zellularer Materialien";
Vortrag: Seminarvortrag Universität für Bodenkultur,
Wien (eingeladen);
25.05.2004.
J. Stampfl:
"Rapid Prototyping von zellulären Biomaterialien";
Vortrag: 2. Life Science Meeting "Aktuelle Trend in Forschung, Anwendung und Ausbildung",
Krems (eingeladen);
03.06.2004
- 04.06.2004.
J. Stampfl:
"Rapid Prototyping zellularer Materialien";
Vortrag: MPI für Grenzflächen- und Kolloidforschung,
Potsdam, D;
01.11.2003.
J. Stampfl:
"Rapid Prototyping zellularer Materialien";
Vortrag: Seminar Institut für Pharmazeutische Technologie,
Graz;
12.12.2005.
J. Stampfl:
"Rapid Prototyping: 3D-Strukturierung multihierarchischer Nano- und Biomaterialien";
Vortrag: Seminar "Moderne Analytische Chemie", Institut für chemische Technologien und Analytik,
TU Wien (eingeladen);
14.01.2005.
J. Stampfl:
"Solid freeform fabrication of cellular materials - mechanical properties and new photopolymers";
Vortrag: Micro-mechanical properties of biomaterials, ECI-Conference,
Tomar (Portugal);
26.09.2004.
J. Stampfl:
"Status und Anwendungsperspektiven für abbaubare Biophotopolymere und Zweiphotonenlithographie";
Hauptvortrag: 1. Öffentlicher Workshop des Wachstumskernes BASIS,
Erfurt;
23.02.2012
- 24.02.2012.
J. Stampfl:
"Tough photopolymers for 3D-printing: Design principles and digital materials";
Hauptvortrag: ESIAM,
Trondheim (eingeladen);
09.09.2019
- 11.09.2019.
J. Stampfl:
"Über Länge mal Breite hinaus - der Weg zum dreidimensionalen Druck";
Vortrag: 3D-Druck - Motor für die nächste industrielle Revolution,
Linz (eingeladen);
24.06.2013.
J. Stampfl, R. Liska, M. Spitzbart, S. Fischer, H. Noll:
"3D-Mikrostrukurerung funktionaler Materialien";
Vortrag: Mikrotechniktage Dornbirn 2005,
Dornbirn;
22.03.2005
- 23.03.2005.
J. Stampfl, J.-A. Schönherr:
"Analysing the precision of lithography-based additively manufactured glass ceramic parts";
Vortrag: Euromat 2019,
Stockholm;
01.09.2019
- 05.09.2019.
J. Stampfl, S. Seidler, A. Wöß, P. Fratzl:
"Rapid Protoyping zellularer Materialien";
Vortrag: 49. Metallkundekolloquium: Werkstoffe - Einsatz und Entwicklungstendenzen,
Leoben;
07.04.2003
- 09.04.2003.
J. Stampfl, M. Spitzbart, H. Noll, S. Fischer:
"Rapid Prototyping - Fertigungsverfahren der Mikrotechnik";
Vortrag: Kunststoffcluster Niederösterreich - Mikrosystemtechnik,
Wr. Neustadt;
16.06.2005.
J. Stampfl, J. Torgersen, A. Ovsianikov, X.H. Qin, L. Zhiquan, V. Mironov, R. Liska:
"Photo-sensitive Biocompatible Hydrogels Structuring Extracellular Environments by Two Photon Polymerisation";
Poster: 2012 MRS Spring Meeting & Exhibit,
San Francisco;
09.04.2012
- 13.04.2012.
S. Stanic, F. Kamleitner, B. Duscher, T. Koch, S. Knaus, V. Archodoulaki:
"Innovative Upcycling of Polypropylene Post Consumer Waste";
Poster: International Symposium - Science to support circular economy,
TU Wien / Kuppelsaal;
19.09.2018.
G. Stechauner:
"Simulation of precipitates in complex steels";
Vortrag: 7th European Doctoral Meeting,
Trnava, Slovakia;
15.11.2012
- 16.11.2012.
G. Stechauner, E. Kozeschnik:
"Grain boundary and dislocation pipe diffusion in Al, Fe and Ni";
Vortrag: EUROMAT 2013,
Sevilla;
08.09.2013
- 13.09.2013.
G. Stechauner, E. Kozeschnik:
"Investigation of a possible mechanism for the formation of reverted austenite in 13-8 PH steel";
Vortrag: EUROMAT 2015,
Warszawa;
20.09.2015
- 24.09.2015.
G. Stechauner, E. Kozeschnik:
"Simulation of Cu precipitation in Fe-Cu binary system";
Vortrag: 8th European Doctoral Meeting,
Budapest, Ungarn;
13.01.2014
- 14.01.2014.
G. Stechauner, E. Kozeschnik:
"Simulation of precipitation kinetics and strengthening in high-alloyed steel";
Vortrag: MSE 2014,
Darmstadt;
23.09.2014
- 25.09.2014.
G. Stechauner, E. Kozeschnik:
"Tailoring copper precipitates in a 17-4 PH steel by using thermo-kinetic simulation software";
Vortrag: 61. Metallkunde-Kolloquium,
Lech am Arlberg;
15.04.2015
- 17.04.2015.
W. Steiger, P. Gruber, A. Dobos, M. Tromayer, M. Lunzer, R. Liska, A. Ovsianikov:
"Fully Automated Z-scan Setup Based on a Tunable FS-Oscillator";
Poster: AMBA 2017,
Ghent;
28.09.2017.
W. Steiger, P. Gruber, A. Dobos, M. Tromayer, M. Lunzer, R. Liska, A. Ovsianikov:
"Fully Automated Z-Scan Setup based on an tunable FS-Oscillator";
Poster: 1st Vienna Polymer-Group Symposium,
Wien;
27.02.2018.
W. Steiger, P. Gruber, A. Dobos, M. Tromayer, M. Lunzer, R. Liska, A. Ovsianikov:
"Spectral optimization of multiphoton polymerisation for tissue engineering";
Vortrag: ViCEM - Vienna Center for Engineering in Medicine Inaugural Meeting 2017,
Wien;
09.11.2017
- 10.11.2017.
P. Steinbauer, S. Orman, C. Hofstetter, M. Schwentenwein, G. Russmüller, J. Stampfl, R. Liska, S. Baudis:
"Tough photopolymers as customized biocompatible scaffolds for bone tissue regeneration";
Vortrag: New Frontiers in Biofabrication: From Biomolecules to Tissues and Organs,
Leuven, Belgium;
17.09.2019
- 18.09.2019.
P. Steinbauer, S. Orman, C. Hofstetter, M. Schwentenwein, G. Russmüller, J. Stampfl, R. Liska, S. Baudis:
"Tough photopolymers for bone tissue regeneration";
Vortrag: ViCEM - Vienna Center for Engineering in Medicine - Biennial Meeting 2019,
Wien;
14.11.2019
- 15.11.2019.
P. Steinbauer, R. Reichsöllner, B. Dellago, K. Ehrmann, J. Stampfl, R. Liska, S. Baudis:
"Christian Doppler Laboratory for Advanced Polymers for Biomaterials and 3D Printing";
Poster: 2nd Vienna Polymer-Group Symposium,
Universitäts- und Forschungszentrum Tulln;
12.06.2019.
M. Stempniewicz, A. Pyzalla, B. Hasse, T. Wroblewski, G. Goerigk, D. Unwin:
"Analyses of Fossil Bone by Synchrotron Radiation";
Poster: Hasylab User Meeting,
Hamburg;
31.01.2003.
M. Stempniewicz, A. Pyzalla, W. Reimers, A. Günther, H.-G. Brokmeier:
"Microstructure and Texture of Dinosaur Bones";
Poster: Hasylab User Meeting,
Hamburg;
30.01.2004.
M. Stempniewicz, A. Pyzalla, W. Reimers, A. Günther, H.-G. Brokmeier:
"Microstructure and Texture of Dinosaur Bones";
Poster: NESY-Symposium, Österreichische Akademie der Wissenschaften,
Wien;
15.04.2004.
B. Steyrer, C. Gorsche, P. Dorfinger, R. Liska, J. Stampfl:
"Toughening of Photopolymers for Lithography-based Additive Manufacturing";
Vortrag: MSE 2016,
Darmstadt;
26.09.2016
- 29.09.2016.
B. Steyrer, R. Liska, J. Stampfl:
"Printing Photopolymers by Hot Lithography";
Vortrag: Materials Science and Engineering - MSE 2018,
Darmstadt;
26.09.2018
- 28.09.2018.
M. Stockinger, C. Stotter, C. Sommitsch, E. Kozeschnik, R. Radis, D. Huber:
"Numerical Modeling of the Delta Phase Precipitation Kinetic in the Superalloy Allvac718Plus";
Vortrag: Aeromat 2008,
Austin, Texas, USA;
23.06.2008
- 26.06.2008.
J. Stögerer, S. Baumgartner, A. Hochwallner, J. Stampfl:
"Bio-Inspired Toughening of Composites in 3D-Printing";
Vortrag: ESIAM,
Trondheim;
09.09.2019
- 11.09.2019.
J. Stögerer, S. Baumgartner, J. Stampfl:
"Multi-material Toughening of Composites in Polymer 3D-Printing";
Vortrag: EUROMAT 2021,
Wien;
13.09.2021
- 17.09.2021.
J. Stögerer, B. Steyrer, J. Stampfl:
"Silicone acrylates as toughening agents for 3D-printable photopolymers";
Vortrag: 2nd Vienna Polymer-Group Symposium,
Tulln;
12.06.2019.
C. Suarez, G. Requena:
"3D characterisation of the porosity evolution of a short fibre reinforced AlSi alloy during creep";
Vortrag: Seminar Research in progress on metallic materials,
Bratislava;
02.10.2008
- 03.10.2008.
J. Svoboda, Y.V. Shan, E. Kozeschnik, F.D. Fischer:
"Thermodynamic model for Mg-Si dimer formation kinetics in Al-Mg-Si alloys";
Vortrag: 11th International Conference on Diffusion in Solids and liquids,
München (eingeladen);
22.06.2015
- 26.06.2015.
T. Tiefenböck, L. Hirtler, T. Koch, M. Hofbauer, R. Ostermann:
"Beeinflusst die Verwendung eines größeren Durchmessers des Nahtmaterials die die mechanische Stabilität des Sehnenkonstruktes für die Rekonstruktion des vorderen Kreuzbandes - eine biomechanische Studie";
Poster: 55. Jahrestagung der Österreichischen Gesellschaft für Unfallchirurgie,
Salzburg;
03.10.2019
- 05.10.2019.
T. Tiefenböck, T. Koch, L. Hirtler, M. Hofbauer, R. Ostermann:
"Biomechanischer Vergleich zweier unterschiedlicher Bandpräparationstechniken für die Rekonstruktion des vorderen Kreuzbandes - eine anatomische Studie";
Vortrag: 55. Jahrestagung der Österreichischen Gesellschaft für Unfallchirurgie,
Salzburg;
03.10.2019
- 05.10.2019.
M. Todt, M. Bartosik, H. J. Böhm, F. G. Rammerstorfer, P.H. Mayrhofer:
"Influence of Undulations on the Thermo-Mechanical Behavior of Thin Film-Substrate Systems";
Vortrag: Joint Annual Meeting of DMV and GAMM 2016,
Braunschweig;
07.03.2016
- 11.03.2016.
M. Todt, M. Nagler, A. Wagner, M. Bartosik, P.H. Mayrhofer, H. J. Böhm:
"Simulation of the Thermo-Mechanical Behavior of Multi-Layer Thin Film-Substrate Systems";
Vortrag: IEA AMT Executive Committee Meeting,
Wiener Neustadt;
02.06.2017.
M. Todt, M. Schwab, M. Humer, F. G. Rammerstorfer, H. E. Pettermann:
"Accounting for Transverse Shear in Shell-Based Ply-Level Models of Layered Composites";
Vortrag: 88th Annual Meeting of GAMM,
Ilmenau/Weimar, Germany;
06.03.2017
- 10.03.2017.
M. Todt, M. Schwab, M. Humer, F. G. Rammerstorfer, H. E. Pettermann:
"Shell-Based Ply-Level Models of Layered Composites";
Poster: 88th Annual Meeting of GAMM,
Ilmenau/Weimar, Germany;
06.03.2017
- 10.03.2017.
M. Todt, R.W. Tomas, T. Koch, H. E. Pettermann:
"Numerical Study of yhe Creep Buckling Response of Laminated Orthotropic Linear Viscoelastic Cylindrical Shells";
Vortrag: 8th ECCOMAS Thematic Conference on the Mechanical Response of Composites,
Göteborg;
22.09.2021
- 24.09.2021.
M. Todt, R.W. Tomas, T. Koch, H. E. Pettermann:
"Numerische Vorhersage der linear viskoelastischen Materialeigenschaften von Faserverbundlaminaten";
Vortrag: CU-Forum "CARBON COMPOSITES AUSTRIA" 2019,
Spielberg;
12.11.2019.
M. Todt, R.W. Tomas, T. Koch, H. E. Pettermann:
"Simulation of the Mechanical Response of Composite Components Under Consideration of Their Orthotropic Viscoelastic Material Behavior";
Vortrag: 14th World Congress on Computational Mechanics (WCCM 2020, Paris),
Paris;
11.01.2021
- 15.01.2021.
M. Todt, A. Wagner, M. Nagler, M. Bartosik, H. J. Böhm:
"Finite Element Simulation and Analytical Estimation of Eigenstresses in Thin-Film-Substrate Systems";
Vortrag: 89th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM),
München, Germany;
19.03.2018
- 23.03.2018.
D. Tolnai:
"3D characterization of AlSi8Mg5 alloy by synchrotron tomography";
Vortrag: Seminar Research in progress on metallic materials,
Bratislava;
02.10.2008
- 03.10.2008.
D. Tolnai, H.P. Degischer, P. Cloetens, J. Lendvai:
"Tomographic characterization of cast Al-Mg-Si alloys";
Vortrag: EUROMAT 2009,
Glasgow;
07.09.2009
- 10.09.2009.
D. Tolnai, H.P. Degischer, P. Cloetens, J. Lendvai:
"Tomographic characterization of cast Al-Mg-Si alloys";
Vortrag: PhD seminar Prag,
Prag;
02.11.2009
- 05.11.2009.
D. Tolnai, H.P. Degischer, J. Lendvai:
"3D characterization of AlMg5Si8 alloy";
Vortrag: Erasmus school,
Smolenica;
07.05.2008.
D. Tolnai, H.P. Degischer, J. Lendvai:
"3D characterization of AlMg5Si8 alloy";
Vortrag: Inst.Seminar of the Department of Materials Physics,
Bratislava;
16.01.2008.
D. Tolnai, H.P. Degischer, J. Lendvai:
"3D characterization of AlSi8Mg5 alloy by synchrotron tomography";
Vortrag: XTOP 2008,
Linz;
17.09.2008.
D. Tolnai, H.P. Degischer, J. Lendvai:
"3D characterizationof cast AlSi7Mg5 alloy by synchrotron tomography";
Vortrag: AES-ATEMA 2008,
Cesena;
03.09.2008.
D. Tolnai, H.P. Degischer, J. Lendvai:
"Characterization of AlSi8Mg5 alloy by X-ray microtomography";
Vortrag: NSS 2008, Workshop on X-Ray Micro Imaging of Materials, Devices, and Organisms,
Dresden;
24.10.2008.
D. Tolnai, H.P. Degischer, J. Lendvai:
"High resolution tomographic methods in material science";
Vortrag: Institut Seminar, Department of Materials Physics, Eötvös Universität,
Balatonszemes;
19.01.2009
- 21.01.2009.
D. Tolnai, J. Lendvai, H.P. Degischer:
"Characterization of a cast Al alloy by synchrotron tomograpy";
Poster: ESRF Users' Meeting,
Grenoble - Frankreich;
05.02.2009
- 06.02.2009.
D. Tolnai, G. Requena, P. Cloetens, J. Lendvai, H.P. Degischer:
"Sub-micrometer holotomographic characterization of coarsening of microstructure in AlMg7.3Si3.5";
Vortrag: 3DIMS,
Hourtin, France;
06.09.2010
- 10.09.2010.
D. Tolnai, G. Requena, P. Cloetens, J. Lendvai, H.P. Degischer:
"Sub-micrometer holotomographic characterization of coarsening of primary phases in AlMg7.3Si3.5";
Vortrag: HETMAT Seminar,
Montalieu;
15.07.2010
- 16.07.2010.
D. Tolnai, G. Requena, P. Cloetens, J. Lendvai, H.P. Degischer:
"Sub-micrometer holotomographic characterization of Mg2Si in strip cast AlMg7.3Si3.5";
Poster: Junior EUROMAT,
Lausanne, Schwitzerland;
26.07.2010
- 30.07.2010.
D. Tolnai, G. Requena, L. Salvo, P. Cloetens:
"3D characterization of microstructure evolution of cast AlMgSi alloys by synchrotron tomography";
Vortrag: Avizo European User Group Meeting,
Bordeaux - France;
30.05.2012
- 01.06.2012.
D. Tolnai, G. Requena, L. Salvo, J. Lendvai, H.P. Degischer:
"Observation of solidification of Al-based alloys";
Vortrag: HETMAT Seminar,
Budapest;
28.05.2009
- 29.05.2009.
D. Tolnai, G. Requena, A. Stark, N. Hort:
"In situ characterization of solidification by synchrotron radiation";
Vortrag: MagNET Research Network Workshop - Solidification of Magnesium Alloys,
Montreal - Canada;
05.11.2012
- 06.11.2012.
D. Tolnai, P. Townsend, G. Requena, L. Salvo, J. Lendvai, H.P. Degischer:
"In situ synchrotron tomographic investigation on the solidification of AlMg5Si8";
Poster: ESRF Users' Meeting,
Grenoble - Frankreich;
08.02.2011
- 09.02.2011.
D. Tolnai, P. Townsend, G. Requena, L. Salvo, J. Lendvai, H.P. Degischer:
"In situ tomographic investigation of the solidification of AlMg5Si8";
Vortrag: Euromat 2011,
Montpellier;
12.09.2011
- 15.09.2011.
R.W. Tomas, M. Todt, T. Koch, H. E. Pettermann:
"Numerical prediction of the homogenized orthotropic linear viscoelastic material properties of composite plies and laminated composites";
Vortrag: 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019),
Vienna;
18.02.2019
- 22.02.2019.
J. Torgersen:
"High Speed Nano 3D Printing";
Vortrag: TEDx Vienna,
Wien (eingeladen);
03.11.2012.
J. Torgersen, A. Ovsianikov, V. Mironov, N.U Pucher, X.H. Qin, Z. Li, K. Cicha, T. Machacek, V. Jantsch-Plunger, R. Liska, J. Stampfl:
"High Speed 3D laser micro-fabrication of biocompatible hydrogel scaffolds";
Hauptvortrag: CAIM III Tercier Congreso Argentino die Engereía Mécanica,
Buenos Aires (eingeladen);
02.10.2012
- 05.10.2012.
C. Turecek, M. Schuster, F. Varga, R. Liska, B. Kaiser, J. Stampfl, K. Klaushofer:
"Evaluation and influence of photopolymers, capable for rapid prototyping, on the adhesion, proliferation and differentiation of osteoblasts";
Poster: 33rd European Symposium on Calcified Tissues,
Prag;
10.05.2006
- 14.05.2006.
J. Van Hoorick, H Declercq, M. Cornelissen, H Thienpont, A. Ovsianikov, P. Dubruel, S. Van Vlierberghe:
"3D Printing of Crosslinkable Gelatins: Overcoming the Mechanical Boundaries";
Vortrag: European Conference on Biomaterials,
Krakow, Poland;
30.08.2015
- 03.09.2015.
J. Van Hoorick, H Declercq, M. Cornelissen, H Thienpont, A. Ovsianikov, P. Dubruel, S. Van Vlierberghe:
"Crosslinkable Gelatins for 3D Printing: From Material Derivatization Towards Biomedical Application";
Vortrag: International Materials Research Congress,
Cancun, Mexico (eingeladen);
15.08.2015
- 21.08.2015.
J. Van Hoorick, M. Markovic, H Declercq, M. Cornelissen, T. Fowler, O. Hoffmann, A. Ovsianikov, J Van Erps, H Thienpont, P. Dubruel, S. Van Vlierberghe:
"Cryogel-Polyester Combination Scaffolds for Hard Tissue Engineering";
Vortrag: International Materials Research Congress,
Cancun, Mexico (eingeladen);
15.08.2015
- 21.08.2015.
B. Viernstein, E. Kozeschnik:
"Integrated Physical-Constitutive Computational Framework for Plastic Deformation Modeling";
Vortrag: EUROMAT 2021,
Graz;
13.09.2021
- 17.09.2021.
S. Vincent, P. Lang, E. Kozeschnik et al.:
"Optimization of the fabrication process of 6061 aluminum alloys using experiments and thermokinetic simulations";
Poster: Calphad XLI,
Berkley, USA;
03.06.2012
- 08.06.2012.
M. Vogric, R. Abart, E. Kozeschnik, E. Povoden-Karadeniz:
"Coupling of phase field simulation of pearlite formation considering Fe3C1-x cementite and MatCalc thermokinetic input data";
Vortrag: The 4th International Symposium on Phase-Field Modelling in Materials Science,
Bochum;
22.07.2019
- 25.07.2019.
M. Vogric, E. Kozeschnik, E. Povoden-Karadeniz:
"Thermokinetic considerations on the effect of copper on proeutectoid cementite formation in hypereutectoid steels";
Vortrag: Euromat 2019,
Stockholm;
01.09.2019
- 05.09.2019.
M. Vogric, E. Kozeschnik, J. Svoboda, S. Zamberger, E. Povoden-Karadeniz:
"Modelling of grain boundary cementite growth kinetics in hypereutectoid steels by conventional and autocatalytic ledge growth approaches";
Vortrag: EUROMAT 2021,
Graz;
13.09.2021
- 17.09.2021.
M. Vogric, E. Povoden-Karadeniz:
"An Eshelby inclusion based model for cementite variants in hypereutectoid steel";
Poster: Materials Science and Engineering - MSE 2018,
Darmstadt;
26.09.2018
- 28.09.2018.
M. Vogric, E. Povoden-Karadeniz:
"Multiscale homogenization of elastic properties in hypereutectoid steel";
Vortrag: Online Conference STEELSIM 2021,
Wien;
05.10.2021
- 07.10.2021.
A. Wagner, J. Buchinger, M. Todt, D. Holec, P.H. Mayrhofer, M. Bartosik:
"Apparent fracture toughness of TiN coatings with alternating stress fields";
Poster: 46th International Conference on Metallurgical Coatings and Thin Films,
San Diego;
19.05.2019
- 24.05.2019.
A. Wagner, D. Holec, M. Todt, P.H. Mayrhofer, M. Bartosik:
"An analytical study on the role of misfit dislocations in fracture toughness enhancement of superlattice coatings";
Vortrag: 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019),
Vienna;
18.02.2019
- 22.02.2019.
A. Wagner, D. Holec, M. Todt, P.H. Mayrhofer, M. Bartosik:
"Analytical Modelling of Misfit Dislocation Formation in Superlattice Coatings and its Effect on the Fracture Toughness";
Vortrag: 46th International Conference on Metallurgical Coatings and Thin Films,
San Diego;
19.05.2019
- 24.05.2019.
A. Wagner, M. Nagler, M. Bartosik, H. J. Böhm, M. Todt:
"Efficient Numerical And Analytical Modelling Of Residual Stresses In Multilayer Coatings";
Poster: Materials Science and Engineering - MSE 2018,
Darmstadt;
26.09.2018
- 28.09.2018.
F. Warchomicka:
"Alpha/Beta-phase distribution in Ti-alloy";
Vortrag: Seminar "Heterogeneous Materials",
Budapest;
22.05.2008
- 23.05.2008.
F. Warchomicka:
"Metallographic Caracterization and Compression Tests of Lght Alloys";
Vortrag: 2nd Meeting ADEMAT Network,
London;
01.07.2004
- 03.07.2004.
F. Warchomicka:
"Thermomechanical processing in Titanium Alloys";
Vortrag: Indian Institute of Technology - Roorkee,
Roorkee - India;
09.11.2011.
F. Warchomicka, H.P. Degischer, M. Stockinger:
"Hot deformation of near beta titanium alloys";
Vortrag: Grant Holders Meeting ADEMAT Network,
Saarland University, Saarbrücken, Germany (eingeladen);
17.03.2005
- 18.03.2005.
F. Warchomicka, C. Poletti:
"Characterization of Ti alloys and Ti matrix composites";
Vortrag: Hetmat - Heterogeneous Materials" European Research Group,
Budapest;
28.05.2009
- 29.05.2009.
F. Warchomicka, C. Poletti, M. Stockinger, H.P. Degischer:
"Microstructural evolution of titanium base materials during hot deformation";
Vortrag: Materials Science and Engineering,
Darmstadt - Germany;
24.08.2010
- 26.08.2010.
F. Warchomicka, M. Stockinger, H.P. Degischer:
"Hot deformation of near beta titanium alloys";
Vortrag: 4th Meeting ADEMAT Network,
Alicante University, Alicante, Spain (eingeladen);
23.02.2006
- 25.02.2006.
F. Warchomicka, M. Stockinger, H.P. Degischer:
"Hot deformation of near beta titanium alloys";
Vortrag: 2nd Seminar on MODERN LIGHT METALS for doctoral students of Charles University Praha and University of Technology Vienna/IMST,
Wien;
11.01.2007
- 13.01.2007.
F. Warchomicka, M. Stockinger, H.P. Degischer:
"Microstructural changes of β-Ti alloys during hot compression";
Vortrag: 1. Seminar : Umformung von Metallen (insbesonders wissenschaftliche Arbeiten d. Studenten). Monatanauniversität Leoben/CDL Materials Modelling and Simulation. TU-Wien/IMST, 27.3.2007,
Wien;
27.03.2007.
F. Warchomicka, M. Stockinger, H.P. Degischer:
"Near-beta Titanlegierungen Warmumformung";
Vortrag: 2. Seminar "Umformung von Metallen" (insbesonders wissenschaftl. Arbeiten d. Studenten). Institut f. Umformtechnik und Hochleistungslasertechnik/IFLT und TU-Wien/Inst. f. Werkstoffwissenschaft u. Werkstofftechnologie/IMST,
Wien;
16.04.2007.
F. Warchomicka, M. Stockinger, H.P. Degischer:
"Quantitative analysis of the microstructure of near b-titanium alloy during compression tests";
Vortrag: 11th International Conference on Metal Forming 2006,
University of Birmingham, Birmingham, UK;
11.09.2006
- 13.09.2006.
P. Warczok, Y.V. Shan, E. Kozeschnik:
"Lattice Monte Carlo analysis of vacancy diffusion";
Poster: Materials Science and Engineering - MSE 2012,
Darmstadt;
25.09.2012
- 27.09.2012.
P. Warczok, Y.V. Shan, E. Kozeschnik:
"Lattice Monte Carlo analysis of vacancy diffusion in the presence of discrete trapping";
Vortrag: 8th International Conference on Diffusion in Solids and Liquids - DSL-2012,
Istanbul, Türkei;
25.06.2012
- 29.06.2012.
P. Warczok, J. Zenisek, E. Kozeschnik:
"Analysis of the influence of vacancy-solute interaction on diffusion of atomic monomers and clusters";
Hauptvortrag: TMS Meeting,
San Diego, California, USA;
27.02.2011
- 03.03.2011.
G. Weisgrab:
"Our body from the laboratory";
Vortrag: Pint of Science Festival,
Virtual;
17.05.2021
- 19.05.2021.
G. Weisgrab, O. Guillaume, Z. Guo, A. Poot, D. Grijpma, A. Ovsianikov:
"Fabrication of high-resolution scaffolds using 2-photon polymerization";
Vortrag: Biennial Meeting ViCEM - Vienna Center for Engineering in Medicine,
Wien;
14.11.2019
- 15.11.2019.
L.C. Whitmore, T. Koch, S. Abermann:
"Transmission Electron Microscopy of Indented ZrO2 Layers on Silicon Substrates";
Poster: 2008 E-MRS Fall Meeting,
Warsaw University of Technology, Poland;
15.09.2008
- 19.09.2008.
P. Wiehoff, H. Radlwimmer, S. Ilie, G. Requena, E. Kozeschnik:
"The Influence of Cyclic Cooling on the Hot-Ductility of Continuously Cast Micro-Alloyed Steel";
Vortrag: Metallkunde Kolloquium Lech Arlberg,
Lech;
18.04.2017
- 21.04.2017.
P. Wiehoff, H. Radlwimmer, S. Ilie, G. Requena, E. Kozeschnik:
"The Influence of Temperature Oscillations on Hot-Ductility of Continuously Cast Micro-Alloyed Steel";
Vortrag: EUROMAT 2017,
THESSALONIKI;
17.09.2017
- 22.09.2017.
E. Wild, L. Wang, B. Hasse, T. Wroblewski, A. Pyzalla, W. Reimers:
"Microstructure Changes in Train Wheels";
Poster: Hasylab User Meeting,
Hamburg;
31.01.2003.
D. Wipp, L. Volgger, H. Hutter, A. Gramlich, M. Weiss, A. Limbeck, S. Zamberger, M. Galler, E. Povoden-Karadeniz:
"Successful determination of trace element boron in steel by combined high-resolution analytical techniques";
Vortrag: Euromat 2019,
Stockholm;
01.09.2019
- 05.09.2019.
D. Wipp, M. Weiss, A. Limbeck, A. Gramlich, S. Zamberger, M. Galler, E. Povoden-Karadeniz:
"Tracing competitive segregation effects in boron containing micro-alloyed steels";
Vortrag: Materials Science & Technology 2019,
Portland, Oregon;
29.09.2019
- 03.10.2019.
T. Wojcik:
"Nb(C,N) precipitation in microalloyed steel: simulation and TEM analysis";
Vortrag: 7th Seminar for Central European PhD Students,
Trnava;
15.11.2012
- 16.11.2012.
T. Wojcik, E. Kozeschnik:
"Schichtweises Wachstum von (Nb,Ti)(C,N) Ausscheidungen während der zyklischen Abkühlung von mikrolegiertem Stahl";
Vortrag: 59. Metallkunde-Kolloquium,
Lech am Arlberg;
15.04.2013
- 17.04.2013.
T. Wojcik, E. Kozeschnik:
"Shell-wise growth of (Nb,Ti)(C,N) precipitates during cyclic cooling of microalloyed steel";
Vortrag: EUROMAT 2013,
Sevilla;
08.09.2013
- 13.09.2013.
T. Wojcik, E. Kozeschnik:
"Thermo-kinetic simulation of TTP-diagrams for NbC precipitation in austenite";
Vortrag: MS&T 2013,
Montreal, Kanada;
27.10.2013
- 31.10.2013.
T. Wojcik, E. Kozeschnik, M. Lückl:
"Precipitation-Induced Hot Ductility Loss in Microalloyed Steel - A TEM-Study";
Vortrag: EUROMAT 2015,
Warszawa;
20.09.2015
- 24.09.2015.
T. Wojcik, M. Rath, E. Kozeschnik:
"EBSD study on the recrystallization behaviour of the nickel-base superalloy Rene 65";
Vortrag: 19th International Microscopy Congress,
Sydney, Australia;
09.09.2018
- 14.09.2018.
T. Wojcik, M. Rath, E. Kozeschnik:
"TEM-Characterization and Precipitation Simulation of Secondary Phases in Ni-base Superalloy Rene 65";
Vortrag: EUROMAT 2017,
THESSALONIKI;
17.09.2017
- 22.09.2017.
T. Wojcik, A. Redermeier, T. Ebner, E. Kozeschnik:
"Characterization of metastable phases in Al-Mg-Si alloys after interrupted heating experiments";
Vortrag: Euromat 2019,
Stockholm;
01.09.2019
- 05.09.2019.
J. Wu, E. Kozeschnik, A. Falahati:
"Thermo-kinetic computer simulation of DSC curve of Al-Cu-Mg alloys";
Vortrag: Materials Science and Engineering - MSE 2012,
Darmstadt;
25.09.2012
- 27.09.2012.
Z. Xu, Z. Zhang, M. Bartosik, P.H. Mayrhofer, Y. He:
"Insight into the structural evolution of nanocrystalline TiN film and the structure-property relationship";
Vortrag: Materials Science and Engineering - MSE 2018,
Darmstadt;
26.09.2018
- 28.09.2018.
B. Yang, H.P. Degischer, P. Reisinger, H. Presslinger:
"Hochtemperaturzugversuche an austenitisierten Proben aus Stranggussbrammen - Einfluss der Legierungselemente";
Vortrag: 31. Sitzung des ASMET-Unterausschusses "Warmfeste Stähle und Hochtemperaturwerkstoffe",
Linz, Österreich;
06.04.2005.
B. Yang, H.P. Degischer, P. Reisinger, H. Presslinger:
"Zähigkeit von Stahlbrammen bei erhöhter Temperatur";
Vortrag: 51. Metallkunde-Kolloquium,
Lech am Arlberg;
11.04.2005
- 13.04.2005.
B. Yang, C. Zaruba, H. Knoblich, H.P. Degischer, G. Xia, H. Presslinger, P. Reisinger, K. Spiradek-Hahn, J. Wosik:
"Gefüge und Zähigkeit von Stahlbrammen bei erhöhter Temperatur";
Vortrag: 38. Metallographie-Tagung 2004,
Bochum;
29.09.2004
- 01.10.2004.
D. Yubero, S. Windisch:
"Evaluation of neutron diffraction experiments on MMC";
Vortrag: Seminar "Heterogeneous Materials",
Budapest;
22.05.2008
- 23.05.2008.
S. Zamberger, E. Kozeschnik:
"Computational analysis of hydrogen long-range diffusion in steel accounting for the presence of various traps";
Poster: International Hydrogen Conference 2016,
Moran, Wyoming, USA;
11.09.2016
- 14.09.2016.
S. Zamberger, P. Lang, G. Klösch, J. Klarner, G. Mori, E. Kozeschnik:
"Long-range diffusion of H in the presence of traps in a microalloyed steel";
Vortrag: OPTIMOM 2014,
Pembroke College Oxford;
14.09.2014
- 16.09.2014.
S. Zamberger, T. Wojcik, G. Klösch, E. Kozeschnik:
"The influence of nitrogen on the precipitation kinetics in microalloyed medium carbon steel";
Vortrag: THERMEC´2016,
Graz (eingeladen);
29.05.2016
- 03.06.2016.
L. Zauner, A. Bahr, T Kozák, J Capek, T. Wojcik, O Hunold, S. Kolozsvári, P Zeman, P.H. Mayrhofer, H. Riedl:
"Time-averaged and time-resolved ion fluxes related to reactive HiPIMS deposition of Ti-Al-N films";
Vortrag: ÖGV- Seminar 2021,
Wien;
24.09.2021.
L. Zauner, Ph Ertelthaler, T. Wojcik, H. Bolvardi, S. Kolozsvári, P.H. Mayrhofer, H. Riedl:
"Reactive HiPIMS deposition of Ti-Al-N: Influence of the deposition parameters on the cubic to hexagonal phase transition";
Poster: AVS 2020 International Twitter Poster Competition,
New York, NY, USA;
08.07.2020.
L. Zauner, R Hahn, M Alfreider, O Hunold, P. Polcik, D. Kiener, H. Riedl:
"Influence of the Bonding Nature on the Fatigue Resistance of Cr-based Thin Films";
Vortrag: 47th International Conference on Metallurgical Coatings and Thin Films, ICMCTF,
San Diego, CA, USA;
26.04.2021
- 30.04.2021.
L. Zauner, R Hahn, M Alfreider, P. Polcik, O Hunold, D. Kiener, H. Riedl:
"Fatigue testing of protective coatings: New insights on Cr-based ceramics";
Vortrag: 2020 MRS Virtual Spring/Fall Meeting,
Boston, MA, USA;
27.11.2020
- 04.12.2020.
L. Zauner, R Hahn, P. Polcik, O Hunold, D. Kiener, H. Riedl:
"Advances in fatigue testing of protective coatings: A case study on Cr-based ceramics";
Vortrag: AVS 67 Virtual Symposium,
Online;
25.10.2021
- 28.10.2021.
L. Zauner, T. Wojcik, T Kozák, J Capek, H. Bolvardi, S. Koloszvári, P.H. Mayrhofer, H. Riedl:
"Reactive HiPIMS deposition of Ti-Al-N: Influencing the Cubic to Wurtzite phase transition";
Poster: PLATHINIUM (Plasma Thin film International Union Meeting),
Antibes;
23.09.2019
- 27.09.2019.
L. Zauner, T. Wojcik, T Kozák, J Capek, H. Bolvardi, S. Koloszvári, P.H. Mayrhofer, H. Riedl:
"Tuning the cubic to wurtzite phase transition in Ti-Al-N by reactive HiPIMS deposition";
Poster: 46th International Conference on Metallurgical Coatings and Thin Films,
San Diego;
19.05.2019
- 24.05.2019.
L. Zauner, T. Wojcik, T Kozák, J Capek, H. Bolvardi, S. Kolozsvári, P.H. Mayrhofer, H. Riedl:
"Integral and Time-Resolved Ion Distribution Functions in a Reactive Ti-Al HiPIMS Discharge";
Poster: 47th International Conference on Metallurgical Coatings and Thin Films, ICMCTF,
San Diego, CA, USA;
26.04.2021
- 30.04.2021.
L. Zauner, T. Wojcik, T Kozák, J Capek, H. Bolvardi, S. Kolozsvári, P.H. Mayrhofer, H. Riedl:
"Reactive HiPIMS deposition of Ti-Al-N: Influence of the deposition parameters on the cubic to hexagonal phase transition";
Vortrag: 17th International Conference on Plasma Surface Engineering,
Erfurt, Deutschland;
07.09.2020
- 10.09.2020.
J. Zenisek:
"Study of precipitation in Fe-Cr-C alloys";
Vortrag: PhD seminar Prag,
Prag;
02.11.2009
- 05.11.2009.
J. Zenisek, E. Kozeschnik, J. Svoboda, F.D. Fischer:
"Impact of microscopic chemical fluctuations on precipitation in interstitial / substitutional systems";
Poster: PTM 2010 Solid-Solid Phase Transformation in Inorganic Materials,
Avignon;
06.06.2010
- 11.06.2010.
E. Zerobin, S. Baudis, Z. Tomasikova, X.H. Qin, M. Markovic, P. Gruber, J. Stampfl, A. Ovsianikov, R. Liska:
"High Resolved Biocompatible Hydrogel Constructs Based on Hyaluronic Acid";
Poster: Workshop Additive manufacturing as a tool to create life in 3D,
Brno;
26.07.2017
- 27.07.2017.
E. Zerobin, S. Baudis, Z. Tomasikova, X.H. Qin, M. Markovic, P. Gruber, J. Stampfl, A. Ovsianikov, R. Liska:
"Two-Photon Structured Hydrogels based on Hyaluronic Acid for Applications in Tissue Engineering";
Vortrag: Österreichische Gesellschaft für Biomedizinische Technik-Jahrestagung 2017,
Wien (eingeladen);
09.11.2017
- 10.11.2017.
E. Zerobin, M. Tromayer, M. Markovic, P. Gruber, J. Stampfl, A. Ovsianikov, S. Baudis, R. Liska:
"Hyaluronic acid as a basis for the development of hydrogel networks and Two-Photon Initiators";
Vortrag: ViCEM - Vienna Center for Engineering in Medicine Inaugural Meeting 2017,
Wien;
09.11.2017
- 10.11.2017.
E. Zerobin, M. Tromayer, M. Markovic, W. Steiger, P. Gruber, J. Stampfl, A. Ovsianikov, S. Baudis, R. Liska:
"Hyaluronic acid as a basis for the development of hydrogel networks and Two-Photon Initiators";
Poster: 1st Vienna Polymer-Group Symposium,
Wien;
27.02.2018.
L. Zhou, D. Holec, M. Bartosik, F. Körmann, B. Grabowski, J. Neugebauer, P.H. Mayrhofer:
"Structural stability and thermodynamics of CrN magnetic phases from first principles";
Poster: From Electrons to Phase Transitions,
Vienna;
26.02.2014
- 28.02.2014.
K. Zimnik:
"Steel insert in Al-Casting";
Vortrag: ALWS Subproj. A,
Braunau;
14.11.2006.
K. Zimnik, S. Lüftl:
"Development of a postgraduate course on light weight design with modern materials";
Vortrag: Kick Off Meeting ALWS Subproj. I,
Linz;
19.06.2007
- 20.06.2007.
K. Zimnik, A. Pyzalla:
"Analyses of Internal Strains in Stents using Diffraction";
Poster: Hasylab User Meeting,
Hamburg;
28.01.2005.
K. Zimnik, A. Pyzalla, A. Fischer:
"Microstructure and Deformation Behaviour of Coronary Stents during Fatigue";
Poster: Hasylab User Meeting,
Hamburg;
30.01.2004.
K. Zimnik, A. Pyzalla, S. Weiss, A. Fischer:
"Microstructure and Deformation Behaviour of Coronary Stents during Fatigue";
Poster: NESY-Symposium, Österreichische Akademie der Wissenschaften,
Wien;
15.04.2004.
N. Zöger, C. Streli, P. Wobrauschek, G. Pepponi, C. Jokubonis, G. Falkenberg, P. Sanders, R. Ferreyro, A. Pyzalla:
"Synchrotron μ-XRF determination of element distribution in fossilized sauropod bones";
Poster: ICXOM 2005,
Frascati (Italy);
25.09.2005
- 30.09.2005.
D. Zügner, S. Holly, W. Ernst, R. Schnitzer, E. Kozeschnik:
"Computational analysis of the yield stress of ultra-high strength all-weld metals";
Vortrag: 12th International Seminar on Numerical Analysis of Weldability,
Graz - Castle Seggau;
23.09.2018
- 26.09.2018.
D. Zügner, S. Zamberger, G. Rupprechter, N. Yigit, E. Kozeschnik:
"Hydrogen trapping in Fe-Nb-C - Modeling and experiments";
Vortrag: THERMEC 2018,
Paris, Frankreich;
08.07.2018
- 13.07.2018.
Patente
M. Arndt, R. Rachbauer, C. Sabitzer, J. Paulitsch, P. Polcik, P.H. Mayrhofer:
"Produce arc evaporation of metallic, intermetallic and ceramic target materials to Al-Cr-N coatings";
Patent: international, cooperative,
Nr. DE102013006633;
eingereicht: 18.04.2013,
erteilt: 23.10.2014.
S. Baumgartner, R. Gmeiner:
"Method and device for manufacturing an object by stereolithographic 3D printing";
Patent: AT,
eingereicht: 02.10.2020.
L. Chen, W. Lengauer, H. Daub, K. Dreyer, D. Kassel, J. Garcia, G. Korb:
"Hard metal or cermet body and method for producing the same";
Patent: USA,
Nr. US 6,506,226 B1;
eingereicht: 2002,
erteilt: 14.01.2003.
H.P. Degischer, H. Danninger, B. Kriszt, H. Ponemayr, M. Daxelmüller, G. Pöckl, K. Consemüller, B. Hribernik, F. Simancik, K. Izdinsky:
"Metallmatrix-Faserverbundkörper und Verfahren zu dessen Herstellung";
Nr. EP 1 046 724 A2;
eingereicht: 18.04.2000,
erteilt: 25.10.2000.
J. Ebert, W. Wachter, G. Rohner, J. Stampfl:
"Verfahren zum Aufbau eines dreidimensionalen Formkörpers";
Patent: At, Ch/li, F, Gb, I, Nl, Es, De,
Nr. EP2855119;
eingereicht: 04.06.2013,
erteilt: 24.02.2016.
J. Ebert, W. Wachter, G. Rohner, J. Stampfl:
"Verfahren zum Aufbau eines dreidimensionalen Formkörpers";
Patent: Japan,
Nr. JP6122107;
eingereicht: 04.06.2013,
erteilt: 07.04.2017.
S. Gruber, J. Stampfl, J. Ebert:
"Device for processing of photopolymerisable material for building up a moulded body in layers";
Patent: Europa,
Nr. EP2875934;
eingereicht: 22.06.2015,
erteilt: 06.12.2016.
R Hahn, A. Berer, T. Glechner, J. Ramm, O Hunold, S. Kolozsvári, H. Riedl:
"Nb-C coatings and process for producing thereof";
Patent: International,
eingereicht: 04.09.2020.
H. John, J. Ebert, K. Rist, S. Baumgartner, M. Hartmann:
"Verfahren zum generativen Aufbau von Formkörpern durch Stereolithographie";
Patent: EP,
eingereicht: 08.11.2019.
C.M. Koller, R. Rachbauer, P. Polcik, J. Ramm, J. Paulitsch, P.H. Mayrhofer:
"Coating method for producing (Al,Cr)2O3-based coatings with enhanced properties";
Patent: international, cooperative,
Nr. WO2014111264;
eingereicht: 17.01.2014,
erteilt: 24.07.2014.
C.M. Koller, R. Rachbauer, P. Polcik, J. Ramm, J. Paulitsch, P.H. Mayrhofer:
"Coating method for producing (Al,Cr)2O3-based coatings with enhanced properties";
Patent: international, cooperative,
Nr. EP2954091;
eingereicht: 17.01.2014,
erteilt: 16.12.2015.
R. Liska, S. Baudis, M. Schuster, C. Heller, F. Varga, J. Stampfl, H. Bergmeister, G. Weigel:
"Zusammensetzungen zur Herstellung biologisch abbaubarer, bioverträglicher, vernetzter Polymere auf Basis von Polyvinylalkohol";
Patent: Österreich,
Nr. AT19032007;
eingereicht: 30.11.2007.
R. Liska, S. Baudis, M. Schuster, C. Heller, F. Varga, J. Stampfl, H. Bergmeister, G. Weigel:
"Zusammensetzungen zur Herstellung biologisch abbaubarer, bioverträglicher, vernetzter Polymere auf Basis von Polyvinylalkohol";
Patent: Österreich,
Nr. At506168 (b1);
eingereicht: 30.11.2007,
erteilt: 15.02.2012.
R. Liska, S. Baudis, M. Schuster, C. Heller, F. Varga, J. Stampfl, H. Bergmeister, G. Weigel:
"Zusammensetzungen zur Herstellung biologisch abbaubarer, bioverträglicher, vernetzter Polymere auf Basis von Polyvinylalkohol";
Patent: Europa,
Nr. Ep2428235 (b1);
eingereicht: 30.11.2007,
erteilt: 04.06.2014.
R. Liska, S. Baudis, M. Schuster, C. Heller, F. Varga, J. Stampfl, H. Bergmeister, G. Weigel:
"Zusammensetzungen zur Herstellung biologisch abbaubarer, bioverträglicher, vernetzter Polymere auf Basis von Polyvinylalkohol";
Patent: USA,
Nr. Us8999323 (b2);
eingereicht: 30.11.2007,
erteilt: 07.04.2015.
R. Liska, C. Gorsche, G. Harakaly, M. Kury, J. Stampfl, P. Dorfinger, Y. Chen, C. Li, S. Kaza:
"Curable composition for use in a high temperature lithography-based photopolymerization process and method of producing crosslinked polymers therefrom for use in orthodontic appliances";
Patent: EU,
Nr. EP3564282A1;
eingereicht: 06.05.2019.
R. Liska, C. Gorsche, G. Harakaly, M. Kury, J. Stampfl, P. Dorfinger, Y. Chen, C. Li, S. Kaza:
"Curable composition for use in a high temperature lithography-based photopolymerization process and method of producing crosslinked polymers therefrom for use in orthodontic appliances";
Patent: USA,
Nr. WO2019213585A1;US2019338067A1;
eingereicht: 03.05.2019.
R. Liska, R. Inführ, H. Gruber, J. Stampfl, H. Lichtenegger:
"Mit Strahlung härtbare, in organischen Lösungsmitteln lösliche Zusammensetzungen und deren Verwendung für Rapid Prototyping Verfahren";
Patent: WO,
Nr. Wo2007002965 (b1);
eingereicht: 30.06.2005,
erteilt: 19.04.2007.
R. Liska, R. Inführ, H. Gruber, J. Stampfl, H. Lichtenegger:
"Mit Strahlung härtbare, in organischen Lösungsmitteln lösliche Zusammensetzungen und deren Verwendung für Rapid Prototyping Verfahren";
Patent: Österreich,
Nr. A1106 / 05;
eingereicht: 30.06.2005,
erteilt: 15.09.2008.
R. Liska, R. Inführ, H. Gruber, J. Stampfl, H. Lichtenegger:
"Mit Strahlung härtbare, in organischen Lösungsmitteln lösliche Zusammensetzungen und deren Verwendung für Rapid Prototyping Verfahren";
Patent: Österreich,
Nr. At502110 (b1);
eingereicht: 30.06.2005,
erteilt: 15.09.2008.
R. Liska, R. Inführ, H. Gruber, J. Stampfl, H. Lichtenegger:
"Mit Strahlung härtbare, in organischen Lösungsmitteln lösliche Zusammensetzungen und deren Verwendung für Rapid Prototyping Verfahren";
Patent: Europa,
Nr. Ep1907192 (b1);
eingereicht: 30.06.2005,
erteilt: 19.11.2008.
R. Liska, R. Inführ, H. Gruber, J. Stampfl, H. Lichtenegger:
"Mit Strahlung härtbare, in organischen Lösungsmitteln lösliche Zusammensetzungen und deren Verwendung für Rapid Prototyping Verfahren";
Patent: USA,
Nr. Us7815835 (b2);
eingereicht: 30.06.2005,
erteilt: 19.10.2010.
R. Liska, R. Inführ, H. Gruber, J. Stampfl, H. Lichtenegger:
"Mit Strahlung härtbare, in organischen Lösungsmitteln lösliche Zusammensetzungen und deren Verwendung für Rapid Prototyping Verfahren";
Patent: Japan,
Nr. Jp4861413 (b2);
eingereicht: 30.06.2005,
erteilt: 25.01.2012.
R. Liska, M. Schuster, H. Gruber, J. Stampfl, F. Varga:
"Mit Strahlung härtbare, biologisch abbaubare Zusammensetzung und deren Verwendung als polymere Stützmaterialien für den Knochenersatz";
Patent: Österreich,
Nr. AT 501700;
eingereicht: 10.04.2005,
erteilt: 15.03.2011.
R. Liska, M. Schuster, J. Stampfl, H. Gruber, F. Varga:
"Photocurable polymer moldings for prostheses";
Patent: Internationales Patent,
Nr. Wo 2006108202 A8, US erteilt (US 8,022,155 B2 20.8.2011);
eingereicht: 10.04.2006,
erteilt: 20.08.2011.
R. Liska, M. Schuster, J. Stampfl, H. Gruber, F. Varga:
"Photocurable polymer moldings for prostheses";
Patent: Österreich,
Nr. At501700 (b1);
eingereicht: 10.04.2006,
erteilt: 15.03.2011.
R. Liska, M. Schuster, J. Stampfl, H. Gruber, F. Varga:
"Photocurable polymer moldings for prostheses";
Patent: USA,
Nr. Us8022155 (b2);
eingereicht: 10.04.2006,
erteilt: 20.09.2011.
R. Liska, F. Schwager, H. Gruber, J. Stampfl:
"Mit Strahlung härtbare wasserlösliche Zusammensetzung und deren Verwendung für Rapid Prototyping Verfahren";
Patent: Österreich,
Nr. AT 412 399 (2004);
eingereicht: 18.06.2003,
erteilt: 15.07.2005.
R. Liska, J. Stampfl, J. Patzer, W. Wachter, C. Appert:
"Vorrichtung und Verfahren zur Verarbeitung von lichtpolymerisierbarem Material zum schichtweisen Aufbau eines Körpers";
Patent: Europa,
Nr. Ep2337668 (b1);
eingereicht: 20.10.2008,
erteilt: 20.03.2013.
R. Liska, J. Stampfl, J. Patzer, W. Wachter, C. Appert:
"Vorrichtung und Verfahren zur Verarbeitung von lichtpolymerisierbarem Material zum schichtweisen Aufbau eines Körpers";
Patent: USA,
Nr. Us 8741203 (b2);
eingereicht: 20.10.2008,
erteilt: 03.06.2014.
R. Liska, J. Stampfl, F. Varga, H. Gruber, S. Baudis, C. Heller, M. Schuster, H. Bergmeister, G. Weigel, C. Dworak:
"Composition that can be cured by polymerization for the production of biodegradable, biocompatible, cross-linkable polymers on the basis of polyvinyl alcohol";
Patent: WO,
Nr. Wo 2009065162 A2;
eingereicht: 23.11.2007,
erteilt: 28.05.2009.
R. Liska, J. Stampfl, F. Varga, H. Gruber, S. Baudis, C. Heller, M. Schuster, H. Bergmeister, G. Weigel, C. Dworak:
"Composition that can be cured by polymerization for the production of biodegradable, biocompatible, cross-linkable polymers on the basis of polyvinyl alcohol";
Patent: Eu, Usa, Jp, Ca,
Nr. EP2219697;
eingereicht: 21.11.2008,
erteilt: 28.05.2009.
R. Liska, J. Stampfl, F. Varga, H. Gruber, S. Baudis, C. Heller, M. Schuster, H. Bergmeister, G. Weigel, C. Dworak:
"Composition that can be cured by polymerization for the production of biodegradable, biocompatible, cross-linkable polymers on the basis of polyvinyl alcohol";
Patent: Europa,
Nr. Ep2428235 (b1);
eingereicht: 23.11.2007,
erteilt: 04.06.2014.
R. Liska, J. Stampfl, F. Varga, H. Gruber, S. Baudis, C. Heller, M. Schuster, H. Bergmeister, G. Weigel, C. Dworak:
"Composition that can be cured by polymerization for the production of biodegradable, biocompatible, cross-linkable polymers on the basis of polyvinyl alcohol";
Patent: USA,
Nr. Us8999323 (b2);
eingereicht: 23.11.2007,
erteilt: 07.04.2015.
G. Mitic, S. Ramminger, H.P. Degischer, T. Licht:
"Verbundwerkstoff und Bodenplatte";
Patent: Deutschland,
Nr. DE 10 2005 051 269 B3;
eingereicht: 26.10.2005,
erteilt: 31.05.2007.
N. Moszner, W. Wachter, C. Appert, V. Rheinberger, R. Liska, J. Stampfl, J. Patzer:
"Lichthärtende Schlicker für die stereolithographische Herstellung von Dentalkeramiken";
Patent: Europa,
Nr. EP2151214;
eingereicht: 30.07.2008,
erteilt: 23.01.2013.
N. Moszner, W. Wachter, C. Appert, V. Rheinberger, R. Liska, J. Stampfl, J. Patzer:
"Light-curing slips for the stereolithographic preparation of dental ceramics";
Patent: USA,
Nr. US 2010-0029801;
eingereicht: 27.02.2009.
N. Moszner, W. Wachter, C. Appert, V. Rheinberger, R. Liska, J. Stampfl, J. Patzer:
"Photo-curable slip for preparing dental ceramic by three dimensional lithography";
Patent: Japan,
Nr. JP2010031279 (a);
eingereicht: 29.07.2009.
N. Moszner, W. Wachter, C. Appert, V. Rheinberger, R. Liska, J. Stampfl, J. Patzer:
"Photo-curable slip for preparing dental ceramic by three dimensional lithography";
Patent: USA,
Nr. Us7927538 (b2);
eingereicht: 29.07.2009,
erteilt: 19.04.2011.
N. Moszner, W. Wachter, C. Appert, V. Rheinberger, R. Liska, J. Stampfl, J. Patzer:
"Photo-curable slip for preparing dental ceramic by three dimensional lithography";
Patent: Europa,
Nr. Ep2151214 (b1);
eingereicht: 29.07.2009,
erteilt: 23.01.2013.
N. Moszner, W. Wachter, C. Appert, V. Rheinberger, R. Liska, J. Stampfl, J. Patzer:
"Photo-curable slip for preparing dental ceramic by three dimensional lithography";
Patent: Japan,
Nr. Jp5571917 (b2);
eingereicht: 29.07.2009,
erteilt: 13.08.2014.
J. Paulitsch, J. Ramm, R. Rachbauer, P.H. Mayrhofer:
"Arc-deposited Al-Cr-O coatings having enhanced coating properties";
Patent: EU,
Nr. WO2013159870;
eingereicht: 22.04.2012,
erteilt: 12.04.2013.
P. Polcik, S. Koloszvári, H. Riedl, P.H. Mayrhofer:
"Sputter target and method for producing a sputter target";
Patent: USA,
Nr. 16489435;
eingereicht: 10.03.2017,
erteilt: 05.12.2019.
R. Rachbauer, M. Arndt, P.H. Mayrhofer, P. Polcik, A. Vieweg, J Kalas, H. Riedl:
"Mo-Si-B layers and method for the production thereof";
Patent: international, cooperative,
Nr. WO2015181176;
eingereicht: 17.09.2014,
erteilt: 03.12.2015.
R. Rachbauer, R. Hollerweger, C.M. Koller, P.H. Mayrhofer:
"Ti-Al-Ta-based coating exhibiting enhanced thermal stability";
Patent: international, cooperative,
Nr. WO2014037104;
eingereicht: 04.09.2013,
erteilt: 13.03.2014.
R. Rachbauer, R. Hollerweger, C.M. Koller, P.H. Mayrhofer:
"Ti-Al-Ta-based coating exhibiting enhanced thermal stability";
Patent: Liechtenstein,
Nr. US20150259782;
eingereicht: 04.09.2013,
erteilt: 17.09.2015.
R. Rachbauer, J. Ramm, J. Paulitsch, P.H. Mayrhofer:
"Arc-deposited Al-Cr-O coatings having enhanced coating properties";
Patent: international, cooperative,
Nr. WO2013159893;
eingereicht: 22.04.2013,
erteilt: 31.10.2013.
R. Rachbauer, J. Ramm, J. Paulitsch, P.H. Mayrhofer:
"Arc-deposited Al-Cr-O coatings having enhanced coating properties";
Patent: Liechtenstein,
Nr. US20150111795;
eingereicht: 22.04.2013,
erteilt: 23.04.2015.
H. Riedl, M. Arndt, P. Polcik, P.H. Mayrhofer:
"Arc Evaporated Me11-Ame2azi/mo1-B-Csicbbzii Multilayer Coatings";
Patent: World Patent,
Nr. WO2016012600A1;
eingereicht: 24.07.2014,
erteilt: 28.01.2016.
G. Rohner, W. Wachter, C. Appert, J. Patzer, J. Stampfl:
"Device and method for processing light-polymerizable material for building up an object in layers";
Patent: USA,
Nr. Us 8,623,264 B2;
eingereicht: 20.10.2008,
erteilt: 07.01.2014.
G. Rohner, W. Wachter, C. Appert, J. Patzer, J. Stampfl:
"Device and method for processing light-polymerizable material for the layered assembly of molds";
Patent: USA,
Nr. US 9067359 (b2);
eingereicht: 20.10.2008,
erteilt: 30.06.2015.
G. Rohner, W. Wachter, J. Stampfl, J. Patzer, J. Homa:
"Verfahren und Vorrichtung zur generativen Herstellung eines Formkörpers mit non-planaren Schichten";
Patent: Europa,
Nr. EP-09159894;
eingereicht: 11.05.2009.
C. Sabitzer, J. Paulitsch, P. Polcik, P.H. Mayrhofer:
"Arc Deposition Of Metal, Intermetallic, And Ceramic Target Materials In Order To Produce Al-Cr-N Coatings";
Patent: international, cooperative,
Nr. WO2014170003;
eingereicht: 14.04.2014,
erteilt: 23.10.2014.
J. Stampfl, H. Gruber, H. Lichtenegger, R. Liska, R. Inführ:
"Polymerisierte Formkörper";
Patent: Österreich,
Nr. At501700 (b1);
eingereicht: 29.06.2006,
erteilt: 15.10.2006.
J. Stampfl, H. Gruber, H. Lichtenegger, R. Liska, R. Inführ:
"Polymerisierte Formkörper";
Patent: Japan,
Nr. 2008-518556;
eingereicht: 29.06.2006,
erteilt: 11.11.2011.
J. Stampfl, H. Gruber, H. Lichtenegger, R. Liska, R. Inführ:
"Polymerisierte Formkörper";
Patent: USA,
Nr. Us8022155 (b2);
eingereicht: 29.06.2006,
erteilt: 20.09.2011.
J. Stampfl, H. Gruber, H. Lichtenegger, R. Liska, R. Inführ:
"Rapid Prototyping Method and Radiation-Curable Composition for Use Therein";
Patent: Europa,
Nr. Ep-1-907 192 B1;
eingereicht: 29.06.2007,
erteilt: 19.11.2008.
J. Stampfl, H. Gruber, H. Lichtenegger, R. Liska, R. Inführ:
"Rapid Prototyping method and radiation-curable composition for use therein";
Patent: USA,
Nr. Us 7 815 835 B2;
eingereicht: 29.06.2006,
erteilt: 29.10.2010.
J. Stampfl, H. Gruber, H. Lichtenegger, R. Liska, R. Inführ:
"Rapid-Prototyping-Verfahren und Verwendung in diesem Verfahren einer strahlungshärtbaren Zusammensetzung";
Patent: Europa, USA,
Nr. Us 7,815,835 B2 Ep 1 907 192 B1;
eingereicht: 29.06.2006,
erteilt: 19.10.2010.
J. Stampfl, H. Gruber, H. Lichtenegger, R. Liska, R. Inführ:
"Rapid-Prototyping-Verfahren und Verwendung in diesem Verfahren einer strahlungshärtbaren Zusammensetzung";
Patent: USA,
Nr. Us7815835 (b2);
eingereicht: 29.06.2006,
erteilt: 19.10.2010.
J. Stampfl, H. Gruber, H. Lichtenegger, R. Liska, R. Inführ:
"Rapid-Prototyping-Verfahren und Verwendung in diesem Verfahren einer strahlungshärtbaren Zusammensetzung";
Patent: Japan,
Nr. Jp4861413 (b2);
eingereicht: 29.06.2006,
erteilt: 25.01.2012.
J. Stampfl, J. Homa, J. Patzer, G. Mitteramskogler, W. Wachter, J. Ebert, J. Laubersheimer:
"Verfahren zum Aufbau eines Formkörpers";
Patent: Japan,
Nr. JP5971879;
eingereicht: 21.08.2013,
erteilt: 22.07.2016.
J. Stampfl, F. Schwager, R. Liska, S. Seidler, H. Gruber:
"Mit Strahlung härtbare wasserlösliche und/oder schmelzbare Zusammensetzung und deren Verwendung für Rapid Prototyping Verfahren";
Patent: Österreich,
Nr. 412.399;
eingereicht: 18.06.2003,
erteilt: 15.07.2004.
B. Steyrer, J. Stampfl, R. Liska:
"Lichthärtbare Zusammensetzung";
Patent: Österreich,
eingereicht: 28.04.2017.
Habilitationsschriften
V. Archodoulaki:
"Eigenschaftsänderungen von Polyoxymethylenen induziert durch Verarbeitung, Alterung und Recycling";
TU Wien/Fakultät für Maschinenwesen und Betriebswissenschaften,
2005.
H. Lichtenegger:
"Biological and artificial nanostructures - structure and properties";
TU Wien / Fakultät für Maschinenwesen und Betriebswissenschaften,
2005.
G. Requena:
"Linking properties and architecture in heterogeneous lightweight materials";
TU Wien,
2010.
J. Stampfl:
"3D-Techniken in der Materialkunde";
TU Wien / Fakultät für Maschinenwesen und Betriebswissenschaften,
2004.
Dissertationen (eigene und begutachtete)
S.R. Alavi Zaree:
"Microstructure of Particle Reinforced Steels for Mining Industry";
Betreuer/in(nen), Begutachter/in(nen): H.P. Degischer, H. Danninger;
Institut für Werkstoffwissenschaft und Werkstofftechnologie (E308),
2009;
Rigorosum: 28.10.2009.
A. Altenburger:
"Herstellung und thermophysikalische Eigenschaften von Cu Matrixverbundwerkstoffen mit Cu2O";
Betreuer/in(nen), Begutachter/in(nen): H.P. Degischer, H. Danninger;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2008;
Rigorosum: 15.09.2008.
M. Arif:
"In Situ Assessment of Sputter Target Erosion and Poisoning by Laser Reflectometry";
Betreuer/in(nen), Begutachter/in(nen): C. Eisenmenger-Sittner, M. Cekada, P.H. Mayrhofer;
E-138,
2017;
Rigorosum: 09.08.2017.
H. Asanuma:
"Hard Ti-Al-N endowed with high heat resistance through alloying with lanthanoids";
Betreuer/in(nen), Begutachter/in(nen): P.H. Mayrhofer, F. Bleicher;
E308,
2019;
Rigorosum: 25.05.2019.
H. Asanuma:
"Hard Ti-Al-N endowed with high heat-resistance through alloying with lanthanoids";
Betreuer/in(nen), Begutachter/in(nen): P.H. Mayrhofer, H. Riedl;
Institute of Materials Science and Technology/E308-01,
2019;
Rigorosum: 30.04.2019.
E. Aschauer:
"Mo-Si-B based coatings: Compositional and architectural approaches for high temperature environments";
Betreuer/in(nen), Begutachter/in(nen): P.H. Mayrhofer, H. Riedl, C. Eisenmenger-Sittner, P. Felfer;
E308,
2018;
Rigorosum: 12.12.2018.
Z. Asghar:
"Influence of the 3D architecture of rigid phases on the strength of cast Al-Si alloys";
Betreuer/in(nen), Begutachter/in(nen): G. Requena, E. Maire;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2012;
Rigorosum: 19.04.2012.
P. Barriobero Vila:
"Phase transformation kinetics during continuous heating of α+β and metastable β titanium alloys";
Betreuer/in(nen), Begutachter/in(nen): G. Requena, D. Fabregue, P.H. Mayrhofer;
Institute of Materials Science and Technology - E308,
2015;
Rigorosum: 24.07.2015.
S. Baudis:
"Development and Processing of Materials for Vascular Tissue Regeneration";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, J. Stampfl;
Institu für angewandte Synthesechemie,
2011;
Rigorosum: 11.01.2011.
B. Bauer:
"Enhancement of Creep Resistance by Particle Reinforcement";
Betreuer/in(nen), Begutachter/in(nen): H.P. Degischer, H. Biermann;
308,
2009;
Rigorosum: 06.04.2009.
S. Baumgartner:
"Entwicklung eines hybriden 3D-Druck Prozesses zum Einfärben dentaler Glaskeramiken und selektiver Modifikation von Kunststoffbauteilen";
Betreuer/in(nen), Begutachter/in(nen): J. Stampfl, R. Liska, F. Bircher;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2018;
Rigorosum: 29.11.2018.
S. Beke:
"Metal foaming controlled by ultrasonic waves";
Betreuer/in(nen), Begutachter/in(nen): H.P. Degischer, G. Kaptay;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2011;
Rigorosum: 27.07.2011.
S. Benedikt:
"Novel Long-Wavelength Photoinitiators for Dental Applications";
Betreuer/in(nen), Begutachter/in(nen): R. Liska, J. Stampfl;
Institut für Angewandte Synthesechemie,
2015;
Rigorosum: 01.11.2015.
F. Bleicher:
"Untersuchung des Kühlschmierstoffeinsatzes in der Serienfertigung";
Betreuer/in(nen), Begutachter/in(nen): H. Weseslindtner, T. Varga;
Institut für Fertigungstechnik,
1996.
A. Blutmager:
"Verschleißmodelle und Verschleißschutz in der Plastifiziereinheit von Thermoplast-Spritzgießmaschinen";
Betreuer/in(nen), Begutachter/in(nen): W Friesenbichler, P.H. Mayrhofer;
Chair of Injection Moulding of Polymers, Montanuniversität Leoben,
2018;
Rigorosum: 06.11.2018.
L. Bösch:
"Mechanische Eigenschaften von Schweißgutlegierungen aus neuen 13% Cr-Stahlwerkstoffen (Supermartnsite)";
Betreuer/in(nen), Begutachter/in(nen): T. Varga;
Inst. f. Werkstoffkunde und Materialprüfung,
2002.
M Broas:
"Quality, Microstructural Refinement and Stability of Atomic-layer-deposited Aluminum Nitride and Aluminum Oxide Films";
Betreuer/in(nen), Begutachter/in(nen): M Paulasto-Kröckel, P.H. Mayrhofer;
Aalto ELEC Doctoral School,
2018.
J. Buchinger:
"Toughness-Governing Mechanisms in Transition Metal Nitride Thin Films";
Betreuer/in(nen), Begutachter/in(nen): P.H. Mayrhofer, F Giuliani, C. Eisenmenger-Sittner;
Werkstoffwissenschaft und Werkstofftechnologie,
2020;
Rigorosum: 29.09.2020.
K. Bugelnig:
"Effect of local and global connectivity of phases on damage evolution in cast Al-Si alloys";
Betreuer/in(nen), Begutachter/in(nen): G. Requena, C. Edtmaier, S. Pogatscher;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2019;
Rigorosum: 11.12.2019.
D. Burzic:
"Analysis of oxidation and decarburization of spring steel";
Betreuer/in(nen), Begutachter/in(nen): E. Kozeschnik, J. Schenk;
E308,
2010;
Rigorosum: 25.05.2010.
B. Busetti:
"Development of a hybrid system for stereolithography-based additive manufacturing";
Betreuer/in(nen), Begutachter/in(nen): J. Stampfl, R. Liska;
Institut für Werkstofwissenschaft und Werkstofftechnologie,
2018;
Rigorosum: 28.05.2018.
D. Canelo Yubero:
"Load partition and microstructural evolution at high temperature in multiphase lightweight metallic materials";
Betreuer/in(nen), Begutachter/in(nen): G. Requena;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2014;
Rigorosum: 2014.
C.M. Chimani:
"Micro- and Macromechanical Models for Hybrid, Selectively Reinforced Structures";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, H.P. Degischer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1998.
K. Cicha:
"Struktur-Eigenschaftskorrelation von 3D-Mikrostrukturen, hergestellt mit Hilfe von Zweiphotonenpolymerisation";
Betreuer/in(nen), Begutachter/in(nen): J. Stampfl, E. Wintner;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2012;
Rigorosum: 31.05.2012.
S. Cirak:
"Wasserbasierende Isolierlacksysteme";
Betreuer/in(nen), Begutachter/in(nen): S. Knaus, V. Archodoulaki, H. Hoffmann;
Institut für Angewandte Synthesechemie,
2018;
Rigorosum: 19.12.2018.
J. Crespo Casanova:
"Gefügeprognose für Sphäroguss mittels Differenzial-Thermo-Analyse";
Betreuer/in(nen), Begutachter/in(nen): H.P. Degischer, C. Verdu;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2011;
Rigorosum: 01.07.2011.
V. Dalbauer:
"Phase Formation of Cathodic Arc Evaporated Al-Cr and Al-Cr-O Thin Films";
Betreuer/in(nen), Begutachter/in(nen): P.H. Mayrhofer, M. Stüber, C. Gachot;
Werkstoffwissenschaft und Werkstofftechnologie,
2018;
Rigorosum: 28.08.2018.
T. Daxner:
"Multi-Scale Modeling and Simulation of Metallic Foams";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, H.P. Degischer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2002.
D Djuric:
"Untersuchung des ersten Duktilitätsminimums eines Stahles mit einer neu entwickelten Aufschmelz-Heißzugprüfmethode";
Betreuer/in(nen), Begutachter/in(nen): C. Sommitsch, E. Kozeschnik;
Werkstoffkunde und Schweißtechnik, TU Graz,
2012;
Rigorosum: 18.12.2012.
A. Dobos:
"3D Printed Micro-Environments as Biomimetic In Vitro Models";
Betreuer/in(nen), Begutachter/in(nen): H. Redl, A. Ovsianikov, G. Schütz;
E308,
2020;
Rigorosum: 27.04.2020.
M. Dolezal:
"Elastizität und Dämpfung heterogener Werkstoffe";
Betreuer/in(nen), Begutachter/in(nen): H.P. Degisch