TU Home
Diese Publikationsliste wurde automatisch aus den Publikationsdaten der Fakultät für Bauingenieurwesen erstellt. Wenn Sie komplexere Suchabfragen vornehmen wollen, rufen Sie bitte die Seite "Publikationen der Fakultät" direkt auf, oder verwenden Sie die globale Suchfunktion der Publikationsdatenbank der Technischen Universität Wien!


Publikationsdatenbank Home  

Publikationsliste für
Markus Lukacevic
E202 - Institut für Mechanik der Werkstoffe und Strukturen
als Autorin / Autor bzw. wesentlich beteiligte Person

91 Datensätze (2009 - 2022)


Zeitschriftenartikel


C. Vida, M. Lukacevic, J. Eberhardsteiner, J. Füssl:
"Modeling Approach to Estimate the Bending Strength and Failure Mechanisms of Glued Laminated Timber Beams";
Engineering Structures, 255 (2022), 113862.

M. Autengruber, M. Lukacevic, C. Gröstlinger, J. Eberhardsteiner, J. Füssl:
"Numerical Assessment of Wood Moisture Content-Based Assignments to Service Classes in EC5 and a Prediction Concept of Moisture-Induced Stresses Solely Using Relative Humidity Data";
Engineering Structures, 245 (2021), 112849.

M. Autengruber, M. Lukacevic, C. Gröstlinger, J. Füssl:
"Finite-Element-Based Prediction of Moisture-Induced Crack Patterns for Cross Sections of Solid Wood and Glued Laminated Ttmber Exposed to a Realistic Climate Condition";
Construction and Building Materials, 271 (2021), 121775.

Zusätzliche Informationen

M. Autengruber, M. Lukacevic, G. Wenighofer, R. Mauritz, J. Füssl:
"Finite-element-based concept to predict stiffness, strength, and failure of wood composite I-joist beams under various loads and climatic conditions";
Engineering Structures, 245 (2021), 112908; S. 1 - 22.

Zusätzliche Informationen

M. Lukacevic, M. Autengruber, T. Raimer, J. Eberhardsteiner, J. Füssl:
"Effect of Cast-In-Place Concrete Application on Moisture Distribution in Timber-Concrete Composite Floors with Notched Connections, Investigated Via Finite Element Simulations";
Journal of Building Engineering, 42 (2021), 103005.

S. Pech, M. Lukacevic, J. Füssl:
"A Robust Multisurface Return-Mapping Algorithm and Its Implementation in Abaqus";
Finite Elements in Analysis and Design, 190 (2021), 103531; S. 1 - 9.

M. Autengruber, M. Lukacevic, J. Füssl:
"Finite-Element-Based Moisture Transport Model for Wood Including Free Water Above the Fiber Saturation Point";
International Journal of Heat and Mass Transfer, 161 (2020), 120228.

Zusätzliche Informationen

M. Li, J. Füssl, M. Lukacevic, J. Eberhardsteiner, C. Martin:
"An Algorithm for Adaptive Introduction and Arrangement of Velocity Discontinuities within 3D Finite-Element-Based Upper Bound Limit Analysis Approaches";
Computer Methods in Applied Mechanics and Engineering, 348 (2019), S. 875 - 911.

M. Li, J. Füssl, M. Lukacevic, C. Martin, J. Eberhardsteiner:
"Bending Strength Predictions of Cross-Laminated Timber Plates Subjected to Concentrated Loading Using 3D Finite-Element-Based Limit Analysis Approaches";
Composite Structures, 220 (2019), S. 912 - 925.

M. Lukacevic, G. Kandler, M. Hu, A. Olsson, J. Füssl:
"A 3D Model for Knots and Related Fiber Deviations in Sawn Timber for Prediction of Mechanical Properties of Boards";
Materials & Design, 166 (2019), S. 107617.

S. Pech, G. Kandler, M. Lukacevic, J. Füssl:
"Metamodel Assisted Optimization of Glued Laminated Timber Beams by Using Metaheuristic Algorithms";
Engineering Applications of Artificial Intelligence, 79 (2019), S. 129 - 141.

H. Hengl, W. Kluger-Eigl, M. Lukacevic, R. Blab, J. Füssl:
"Horizontal Deformation Resistance of Paving Block Superstructures - Influence of Paving Block Type, Laying Pattern, and Joint Behaviour";
International Journal of Pavement Research and Technology, 11 (2018), S. 846 - 860.

G. Kandler, M. Lukacevic, J. Füssl:
"Experimental Study on Glued Laminated Timber Beams with Well-Known Knot Morphology";
European Journal of Wood and Wood Products, 76 (2018), S. 1435 - 1452.

Zusätzliche Informationen

G. Kandler, M. Lukacevic, S. Wolff, J. Füssl:
"Stochastic Engineering Framework for Timber Structural Elements";
Beton- und Stahlbetonbau, 113 (2018), S. 96 - 102.

G. Kandler, M. Lukacevic, C. Zechmeister, S. Wolff, J. Füssl:
"Stochastic Engineering Framework for Timber Structural Elements and Its Application to Glued Laminated Timber Beams";
Construction and Building Materials, 190 (2018), S. 573 - 592.

M. Li, J. Füssl, M. Lukacevic, J. Eberhardsteiner, C. Martin:
"A Numerical Upper Bound Formulation with Sensibly-Arranged Velocity Discontinuities and Orthotropic Material Strength Behaviour";
Journal of Theoretical and Applied Mechanics, 56 (2018), 2; S. 417 - 433.

M. Li, J. Füssl, M. Lukacevic, J. Eberhardsteiner, C. Martin:
"Strength Predictions of Clear Wood at Multiple Scales Using Numerical Limit Analysis Approaches";
Computers and Structures, 196 (2018), S. 200 - 216.

J. Füssl, M. Li, M. Lukacevic, J. Eberhardsteiner, C. Martin:
"Comparison of Unit Cell-Based Computational Methods for Predicting the Strength of Wood";
Engineering Structures, 141 (2017), S. 427 - 443.

G. Kandler, M. Lukacevic, J. Füssl:
"Ein Algorithmus zur Rekonstruktion von 3D Astgeometrien und die Einbettung dieser Information in stochastische Konzepte für Brettschichtholz";
ÖIAZ - Österreichische Ingenieur- und Architektenzeitschrift, 162 (2017), S. 105 - 112.

T. Kiefer, H. Kariem, M. Lukacevic, J. Füssl:
"The Compressive Strength of Vertically Perforated Clay Block Masonry Predicted by Means of a Unit-Cell Type Numerical Simulation Tool Taking Discrete Cracking into Account";
Construction and Building Materials, 150 (2017), S. 24 - 34.

M. Lukacevic, J. Füssl, J. Eberhardsteiner:
"Eine numerische Methode zur Beschreibung von Holzversagen - von der Holzzelle bis zu Holzprodukten";
ÖIAZ - Österreichische Ingenieur- und Architektenzeitschrift, 162 (2017), S. 17 - 24.

M. Lukacevic, W. Lederer, J. Füssl:
"A Microstructure-Based Multisurface Failure Criterion for the Description of Brittle and Ductile Failure Mechanisms of Clear-Wood";
Engineering Fracture Mechanics, 176 (2017), S. 83 - 99.

G. Kandler, M. Lukacevic, J. Füssl:
"An Algorithm for the Geometric Reconstruction of Knots within Timber Boards Based on Fibre Angle Measurements";
Construction and Building Materials, 124 (2016), S. 945 - 960.

M. Lukacevic, J. Füssl:
"Application of a Multisurface Discrete Crack Model for Clear Wood Taking into Account the Inherent Microstructural Characteristics of Wood Cells";
Holzforschung, 70 (2016), 9; S. 845 - 853.

M. Lukacevic, J. Füssl, J. Eberhardsteiner:
"Discussion of Common and New Indicating Properties for the Strength grading of Wooden Boards";
Wood Science and Technology, 49 (2015), S. 551 - 576.

M. Lukacevic, J. Füssl, R. Lampert:
"Failure Mechanisms of Clear Wood Identified at Wood Cell Level by an Approach Based on the Extended Finite Element Method";
Engineering Fracture Mechanics, 144 (2015), S. 158 - 175.

J. Füssl, M. Lukacevic, G. Kandler, J. Eberhardsteiner:
"A Comprehensive Mechanical Modeling Approach for the Design of Wood-based Products";
IACM Expressions, 35 (2014), S. 8 - 12.

C. Hackspiel, K. de Borst, M. Lukacevic:
"A Numerical Simulation Tool for Wood Grading Model Development";
Wood Science and Technology, 48 (2014), 3; S. 633 - 649.

C. Hackspiel, K. de Borst, M. Lukacevic:
"A Numerical Simulation Tool for Wood grading: Model Validation and Parameter Studies";
Wood Science and Technology, 48 (2014), 3; S. 651 - 669.

M. Lukacevic, J. Füssl:
"Numerical Simulation Tool for Wooden boards with a Physically Based Approach to Identify Structural Failure";
European Journal of Wood and Wood Products, 72 (2014), 4; S. 497 - 508.

M. Lukacevic, J. Füssl, M. Griessner, J. Eberhardsteiner:
"Performance Assessment of a Numerical Simulation Tool for Wooden Boards with Knots by Means of Full-Field Deformation Measurements";
Strain, 50 (2014), S. 301 - 317.


Buchbeiträge


J. Füssl, M. Lukacevic, S. Pillwein, H. Pottmann:
"Computational Mechanical Modelling of Wood - From Microstructural Characteristics Over Wood-Based Products to Advanced Timber Structures";
in: "Digital Wood Design, Lecture Notes in Civil Engineering", Springer, Cham, 2019, ISBN: 978-3-030-03675-1, S. 639 - 673.


Beiträge in Tagungsbänden


M. Autengruber, M. Lukacevic, J. Füssl:
"Heat and Mass Transfer Model for Wood Under Real Climate Conditions";
in: "Book of Abstracts of the International Conference on Computational Methods in Wood Mechanics - from Material Properties to Timber Structures (CompWood 2019)", Linnaeus University, 2019, ISBN: 978-91-88898-64-7.

S. Pech, G. Kandler, M. Lukacevic, J. Füssl:
"Metamodel Assisted Optimization of Glued Laminated Timber Beams by Using Metaheuristic Algorithms";
in: "Book of Abstracts of the 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019)", J. Eberhardsteiner, J. Schöberl (Hrg.); TU Verlag, 2019, ISBN: 978-3-903024-84-7, S. 438.

S. Pech, M. Lukacevic, J. Füssl:
"Phase Field Method-Based Modeling of Fracture in Wood";
in: "Programme & Proceedings of the China-Austria Forum for Postgraduates of Civil Engineering", J. Zhang, B. Pichler (Hrg.); Vienna University of Technology, 2019, S. 98 - 101.

S. Pech, M. Lukacevic, J. Füssl:
"Phase Field Method-Based Modeling of Fracture in Wood";
in: "Book of Abstracts of the International Conference on Computational Methods in Wood Mechanics - from Material Properties to Timber Structures (CompWood 2019)", Linnaeus University, 2019, ISBN: 978-91-88898-64-7, S. 17.

M. Lukacevic, J. Füssl, J. Eberhardsteiner:
"Simulating Failure Mechanisms in Wooden Boards with Knots by Means of a Microstructure-Based Multisurface Failure Criterion";
in: "Proceedings of the 2018 World Conference on Timber Engineering (WCTE 2018)", The Korean Society of Wood Science Technology, 2018, 8 S.

M. Autengruber, M. Lukacevic, J. Eberhardsteiner, J. Füssl:
"A Numerical Simulation Tool for Coupled Heat and Mass Transfer in Wood";
in: "Programme & Book of Abstracts on Computational Methods in Wood Mechanics - from Material Properties to Timber Structures (CompWood 2017)", TU Verlag, Wien, 2017, ISBN: 978-3-903024-49-6, S. 62.

M. Autengruber, M. Lukacevic, J. Eberhardsteiner, J. Füssl:
"A Numerical Simulation Tool for Coupled Heat and Mass Transfer in Wood";
in: "Book of Abstracts of the XXI. St. Inter-Institute Seminar for Young Researchers", Department of Structural Mechanics, Budapest University of Technology and Economics, 2017, S. 6.

G. Kandler, M. Lukacevic, J. Füssl:
"Experimental and Numerical Investigations on the Mechanical Behavior of Glued Laminated Timber";
in: "Programme & Book of Abstracts on Computational Methods in Wood Mechanics - from Material Properties to Timber Structures (CompWood 2017)", TU Verlag, Wien, 2017, ISBN: 978-3-903024-49-6, S. 36.

M. Li, J. Füssl, M. Lukacevic, J. Eberhardsteiner:
"Numerical Limit Analysis Approaches for Strength Predictions of Cross-Laminated Timber Plates";
in: "Programme & Book of Abstracts on Computational Methods in Wood Mechanics - from Material Properties to Timber Structures (CompWood 2017)", TU Verlag, Wien, 2017, ISBN: 978-3-903024-49-6, S. 90.

M. Lukacevic, J. Füssl, J. Eberhardsteiner:
"A Microstructure-Based Multisurface Failure Criterion for the Description of Brittle and Ductile Failure Mechanisms of Clear-Wood";
in: "Programme & Book of Abstracts on Computational Methods in Wood Mechanics - from Material Properties to Timber Structures (CompWood 2017)", TU Verlag, Wien, 2017, ISBN: 978-3-903024-49-6, S. 28.

J. Füssl, M. Li, M. Lukacevic, J. Eberhardsteiner, C. Martin:
"Three Different Methods for Predicting the Strength Behavior of Clear Wood - A Performance Comparison and Basis for a Combined Approach";
in: "CD-ROM Proceedings of the World Conference on Timber Engineering (WCTE 2016)", J. Eberhardsteiner, W. Winter, A. Fadai, M. Pöll (Hrg.); herausgegeben von: Vienna University of Technology; Grafisches Zentrum HTU GmbH, Vienna, 2016, ISBN: 978-3-903039-00-1, Paper-Nr. 863, 10 S.

G. Kandler, M. Lukacevic, J. Füssl:
"From the Knot Morphology of Individual Timber Baords to the Mechanical Properties of Glued Laminated Timber";
in: "CD-ROM Proceedings of the World Conference on Timber Engineering (WCTE 2016)", J. Eberhardsteiner, W. Winter, A. Fadai, M. Pöll (Hrg.); herausgegeben von: Vienna University of Technology; Grafisches Zentrum HTU GmbH, Vienna, 2016, ISBN: 978-3-903039-00-1, Paper-Nr. 879, 10 S.

M. Li, J. Füssl, M. Lukacevic, J. Eberhardsteiner, C. Martin:
"A Number Limit Analysis Approach for Predicting Strength of Clear Wood";
in: "CD-ROM Proceedings of the World Conference on Timber Engineering (WCTE 2016)", J. Eberhardsteiner, W. Winter, A. Fadai, M. Pöll (Hrg.); herausgegeben von: Vienna University of Technology; Grafisches Zentrum HTU GmbH, Vienna, 2016, ISBN: 978-3-903039-00-1, Paper-Nr. 90, 10 S.

M. Lukacevic, J. Füssl, J. Eberhardsteiner:
"A Numerical Approach to Describe Failure of Wood - From the Wood Cell Level Up to Wood-Based Products";
in: "CD-ROM Proceedings of the World Conference on Timber Engineering (WCTE 2016)", J. Eberhardsteiner, W. Winter, A. Fadai, M. Pöll (Hrg.); herausgegeben von: Vienna University of Technology; Grafisches Zentrum HTU GmbH, Vienna, 2016, ISBN: 978-3-903039-00-1, Paper-Nr. 306, 9 S.

J. Füssl, M. Lukacevic, G. Kandler, J. Eberhardsteiner:
"A Comprehensive Mechanical Modeling Approach for the Optimization of Wood-Based Products";
in: "Proceedings of the EUROMECH Colloquium 556 on Theoretical, Numerical, and Experimental Analyses in Wood Mechanics", TU Dresden, 2015, ISBN: 978-3-00-049643-1, S. 40 - 41.

M. Lukacevic, J. Füssl, J. Eberhardsteiner:
"A Numerical Approach to Describe Failure of Wood - From the Wood Cell Level up to Wood-Based Products";
in: "Proceedings of the 2015 Conference of the ASCE Engineering Mechanics Institute (EMI 2015)", American Society of Civil Engineers (ASCE), 2015.

M. Lukacevic, J. Füssl, J. Eberhardsteiner:
"Influence of Knot Groups on Effective Mechanical Properties of Solid - Wood Based Products Determined by Means of 3D Finite - Element Simulations";
in: "Proceedings of the XII. International Conference on Computational Plasticity (COMPLAS XII)", International Center for Numerical Methods in Engineering (CIMNE), 2013, ISBN: 978-84-941531-5-0, 1 S.

M. Lukacevic, K. de Borst, J. Füssl, J. Eberhardsteiner:
"Influence of Different Knot Groups on Effective Mechanical Properties of Solid-Wood Based Products Determined by Means of 3D Finite-Element Simulations";
in: "Book of Abstracts - 8th European Solid Mechanics Conference (ESMC 2012)", herausgegeben von: TU Graz; TU Graz, 2012, ISBN: 978-3-85125-223-1, 2 S.

M. Lukacevic, J. Füssl:
"A Criterion for the Effective Bending Strength of Wooden Boards with Knots Derived by a 3 D Finite-Element Tool";
in: "Forschungskolloquium Holzbau "Forschung und Praxis"", Universität Stuttgart, Stuttgart, 2012.

C. Hackspiel, M. Lukacevic, K. Hofstetter:
"Modeling of Growth Features for Future";
in: "Proceedings of the International Conference on Grading of Timber and Engineered Wood Products", WoodWisdom-Net, Helsinki, 2011, (eingeladen), S. 84 - 89.

C. Hackspiel, K. Hofstetter, M. Lukacevic, J. Eberhardsteiner:
"A Numerical Simulation Tool for Wood Grading";
in: "Proceeding of the IV European Conference on Computational Mechanics (ECCM 2010)", ECCOMAS, 2010, 2 S.

C. Hackspiel, K. Hofstetter, M. Lukacevic, J. Eberhardsteiner:
"Computational Analysis of the Strength Reducing Effect of Knots in Timber";
in: "Proceedings of the 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics - Abstracts", Centre for Infrastructure Engineering and Safety, Sydney, Australia, 2010, ISBN: 978-0-9808244-0-7, 1 S.


Vorträge und Posterpräsentationen (mit Tagungsband-Eintrag)


M. Autengruber, M. Lukacevic, C. Vida, S. Pech, J. Füssl:
"Computergestützte Modellierung im Holzbau - Herausforderungen und Möglichkeiten";
Vortrag: 25. Dresdner Baustatik-Seminar "Realität - Modellierung - Tragwerksplanung", Dresden (Deutschland); 15.10.2021; in: "25. Dresdner Baustatik-Seminar: Realität - Modellierung - Tragwerksplanung", TU-Dresden (Hrg.); (2021), ISSN: 1615-9705; S. 131 - 160.

Zusätzliche Informationen

M. Lukacevic, J. Füssl, S. Pech, C. Vida, J. Eberhardsteiner:
"Computational Mechanics Concepts for Wood-Based Products and Timber Structural Elements";
Vortrag: World Conference on Timber Engineering (WCTE2021), Santiago, Chile; 09.08.2021 - 12.08.2021; in: "Proceedings of WCTE 2021 - World Conference on Timber Engineering", Santiago, Chile (2021).

Zusätzliche Informationen


Vorträge und Posterpräsentationen (ohne Tagungsband-Eintrag)


M. Lukacevic:
"Computational Modeling Approach for Wood-Based Products and Timber Structural Elements";
Vortrag: XVI. International Conference on Computational Plasticity, Fundamentals and Applications ( COMPLAS 2021), Barcelona, Spain; 07.09.2021 - 10.09.2021.

S. Pech, M. Lukacevic, J. Füssl:
"Phase field method-based modeling of fracture in wood";
Vortrag: 16. International Conference on Computational Plasticity, Fundamentals and Applications, Barcelona, Spain; 07.09.2021 - 09.09.2021.

Zusätzliche Informationen

M. Lukacevic:
"Computational Mechanics Concepts for Mass Timber Products";
Vortrag: Engineering Mechanics Institute Conference and Probabilistic Mechanics & Reliability Conference (EMI/PMC 2021), USA; 25.05.2021 - 28.05.2021.

M. Lukacevic:
"Computational Mechanics Concepts for Wood-Based Products and Timber Structural Elements";
Vortrag: 14th World Congress in Computational Mechanics (WCCM) & ECCOMAS Congress 2020, Virtual Congress; 11.01.2021 - 15.01.2021.

M. Lukacevic:
"Fracture Simulations of Wooden Boards with Knots as a Basis for Timber Engineering Design Concepts";
Vortrag: XV. International Conference on Computational Plasticity - Fundamentals and Applications (COMPLAS 2019), Barcelona, Spain; 03.09.2019 - 05.09.2019.

M. Lukacevic, J. Füssl, S. Pech, J. Eberhardsteiner:
"Simulation of Failure Mechanisms in Wooden Boards with Knots as a Basis for Timber Engineering Design Cencepts";
Poster: Engineering Mechanics Institute 2019 Conference, Pasadena, CA, USA; 18.06.2019 - 21.06.2019.

M. Lukacevic:
"Simulating Failure Mechanisms in Wooden Boards with Knots by Means of a Microstructure-Based Multisurface Failure Criterion";
Vortrag: World Conference on Timber Engineering (WCTE 2018), Seoul, Republic of Korea; 20.08.2018 - 23.08.2018.

M. Lukacevic:
"A Microstructure-Based Multisurface Failure Criterion and Its Application to Wooden Boards with Knots";
Vortrag: 6th European Conference on Computational Fluid Dynamics (ECCM - ECFD 2018), Glasgow, United Kingdom; 11.06.2018 - 15.06.2018.

M. Lukacevic:
"From the Failure Mechanisms of Individual Wooden Boards to the Mechanical Behavior of Timber Structural Elements";
Vortrag: Engineering Mechanics Institute Conference 2018 (EMI 2018), Cambridge, Massachusetts, USA; 29.05.2018 - 01.06.2018.

M. Lukacevic:
"A Microstructure-Based Multisurface Failure Criterion for the Description of Brittle and Ductile Failure Mechanisms of Clear-Wood";
Vortrag: Conference on Computaional Methods in Wood Mechanics - From Material Properties to Timber Structures (CompWood 2017), Vienna, Austria; 07.06.2017 - 09.06.2017.

M. Lukacevic:
"A Numerical Approach to Describe Failure of Wood - From the Wood Cell Level Up to Wood-Based Products";
Vortrag: World Conference on Timber Engineering (WCTE 2016), Vienna, Austria; 22.08.2016 - 25.08.2016.

M. Lukacevic:
"A Numerical Approach to Describe Failure of Wood - From the Wood Cell Level up to Wood-Based Products";
Vortrag: 7th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2016), Crete Island, Greece; 05.06.2016 - 10.06.2016.

M. Lukacevic:
"A Numerical Approach to Describe Failure of Wood - From the Wood Cell Level up to Wood-Based Products";
Vortrag: Engineering Mechanics Institute Conference 2016 (EMI 2016), Nashville, Tennessee, USA; 22.05.2016 - 25.05.2016.

M. Lukacevic:
"A Numerical Approach to Describe Failure of Wood - From the Wood Cell Level up to Wood-Based Products";
Vortrag: 2015 Conference of the ASCE Engineering Mechanics Institute (EMI 2015), Stanford, CA, USA; 16.06.2015 - 20.06.2015.

M. Lukacevic:
"Numerical Simulation Tool for Wooden Boards with Knots";
Vortrag: EMI 2014 Engineering Mechanics Institute Conference, Hamilton, Canada; 05.08.2014 - 08.08.2014.

M. Lukacevic:
"Numerical Simulation Tool for Wooden Boards with Knots";
Vortrag: 5th European Conference on Computational Mechanics (ECCM V), Barcelona, Spain; 20.07.2014 - 25.07.2014.

M. Lukacevic:
"Influence of knot groups on effective mechanical properties of solid-wood based products determined by means of 3D Finite-Element simulations";
Vortrag: 12th International Conference on Computational Plasticity (COMPLAS XII), Barcelona, Spain; 03.09.2013 - 05.09.2013.

M. Lukacevic:
"Influence of knot groups on effective mechanical properties of solid-wood based products determined by means of 3D Finite-Element simulations";
Vortrag: International Conference of the Engineering Mechanics Institute (EMI 2013), Evanston, IL, USA; 04.08.2013 - 07.08.2013.

M. Lukacevic:
"A Criterion for the Effective Strength of Wooden Boards with Knots Derived by a 3D Finite-Element Tool";
Poster: COST Young Researchers' Forum at the 8th FTP Conference, Barcelona, Spain; 11.03.2013 - 12.03.2013.

M. Lukacevic:
"Influence of Different Knot Groups on Effective Mechanical Properties of Solid-Wood Based Products Determined by Means of 3D Finite-Element Simulations";
Vortrag: 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), Wien; 10.09.2012 - 14.09.2012.

M. Lukacevic:
"Influence of Knot Configuration on Effective Strength Properties of Wooden Boards Determined";
Vortrag: Forschungskolloquium Holzbau "Forschung und Praxis", Stuttgart; 12.03.2012 - 13.03.2012.


Dissertationen (eigene und begutachtete)


M. Autengruber:
"Numerical Simulation Concepts for Moisture Transport in Wood and Wood-Based Products, Below and Above the Fiber Saturation Point, to Predict Moisture-Induced Failure Mechanisms";
Betreuer/in(nen), Begutachter/in(nen): M. Lukacevic, J. Füssl, S. Fortino, E. Serrano; Institut für Mechanik der Werkstoffe und Strukturen, 2021; Rigorosum: 03/2021.

M. Lukacevic:
"Numerical Simulation of Wooden Boards Considering Morphological Characteristics and Complex Failure Processes";
Betreuer/in(nen), Begutachter/in(nen): J. Eberhardsteiner, M. Kaliske; Institut für Mechanik der Werkstoffe und Strukturen, 2014; Rigorosum: 29.07.2014.


Diplom- und Master-Arbeiten (eigene und betreute)


M. Macho:
"Das mechanische Verhalten von Holz-Beton-Verbunddecken, untersucht mittels numerischer Simulationen";
Betreuer/in(nen): J. Füssl, M. Lukacevic; Institut für Mechanik der Werkstoffe und Strukturen, 2021; Abschlussprüfung: 26.11.2021.

M. Senoner:
"3D-Finite-Elemente-Modell zur mechanischen Bewertung eines neuen Fenstermontagesystems unter Verwendung eines multifunktionalen Füllmaterials";
Betreuer/in(nen): J. Füssl, M. Lukacevic; Institut für Mechanik der Werkstoffe und Strukturen, 2021; Abschlussprüfung: 22.10.2021.

P. Hacker:
"3D Finite Element Modeling of a Form Fitting Cross Laminated Timber Connection";
Betreuer/in(nen): J. Füssl, M. Lukacevic; Institut für Mechanik der Werkstoffe und Strukturen, 2020; Abschlussprüfung: 17.12.2020.

F. Brandstätter:
"Numerisches Simulationskonzept zur Bestimmung der Feuchtebeanspruchung und dem resultierenden Rissverhalten in unterschiedlichen Holzquerschnitten in Abhängigkeit des Standortes in Österreich";
Betreuer/in(nen): M. Autengruber, M. Lukacevic, J. Füssl; Institut für Mechanik der Werkstoffe un Strukturen, 2020; Abschlussprüfung: 25.09.2020.

C. Vida:
"Computergestützter Modellierungsansatz zur Bestimmung der Biegefestigkeit von Brettschichtholzträgern unter Berücksichtigung von Astgruppen und quasi-sprödem Materialversagen";
Betreuer/in(nen): M. Lukacevic, S. Pech, J. Füssl; Institut für Mechanik der Werkstoffe un Strukturen, 2020; Abschlussprüfung: 25.09.2020.

T. Raimer:
"Der Einfluss des Aufbringens von Frischbeton auf die Feuchtigkeitsverteilung in Holz-Beton-Verbundkonstruktionen mit Kerven, untersucht mittels numerischer Simulationen";
Betreuer/in(nen): M. Autengruber, M. Lukacevic, J. Füssl; Institut für Mechanik der Werkstoffe un Strukturen, 2020; Abschlussprüfung: 23.04.2020.

C. Gröstlinger:
"Numerische Simulation des feuchteinduzierten Rissverhaltens von Holzquerschnitten unter realer Klimabeanspruchung";
Betreuer/in(nen): M. Autengruber, M. Lukacevic, J. Füssl; Institut für Mechanik der Werkstoffe und Strukturen, 2018; Abschlussprüfung: 19.01.2018.

S. Pillwein:
"Gestaltung von Freiform-Holztragwerken durch elastische Verformung";
Betreuer/in(nen): J. Füssl, M. Lukacevic; Institut für Mechanik der Werkstoffe und Strukturen, 2017; Abschlussprüfung: 24.11.2017.

M. Autengruber:
"Modellierung und numerische Simulation des Feuchte- und Temperaturverhaltens von Holz-Aluminium-Verbundträgern";
Betreuer/in(nen): M. Lukacevic, J. Füssl, J. Eberhardsteiner; Institut für Mechanik der Werkstoffe und Strukturen, 2016; Abschlussprüfung: 17.06.2016.

R. Lampert:
"Failure Modes of Wood Cells Identified by an Approach Based on the Extended Finite Element Method";
Betreuer/in(nen): M. Lukacevic, J. Füssl, J. Eberhardsteiner; Institut für Mechanik der Werkstoffe und Strukturen, 2014; Abschlussprüfung: 2014.

M. Griessner:
"Bending Strength of Wooden Boards with Knots - Evaluation of Experiments Using Full-Field Deformation Measurements as a Basis for the Optimization of a 3D Numerical Simulation Tool";
Betreuer/in(nen): M. Lukacevic, J. Füssl; Institut für Mechanik der Werkstoffe und Strukturen, 2013; Abschlussprüfung: 26.04.2013.

M. Lukacevic:
"Validation and Optimization of a Numerical Simulation Tool for Wood Grading";
Betreuer/in(nen): C. Hackspiel, K. Hofstetter, J. Eberhardsteiner; Institut für Mechanik der Werkstoffe und Strukturen, 2009; Abschlussprüfung: 20.03.2009.