Publikationsliste für
Maximilian Autengruber
E202 - Institut für Mechanik der Werkstoffe und Strukturen
als Autorin / Autor bzw. wesentlich beteiligte Person
22 Datensätze (2016 - 2022)
Zeitschriftenartikel
M. Autengruber, M. Lukacevic, C. Gröstlinger, J. Eberhardsteiner, J. Füssl:
"Numerical Assessment of Wood Moisture Content-Based Assignments to Service Classes in EC5 and a Prediction Concept of Moisture-Induced Stresses Solely Using Relative Humidity Data";
Engineering Structures,
245
(2021),
112849.
M. Autengruber, M. Lukacevic, C. Gröstlinger, J. Füssl:
"Finite-Element-Based Prediction of Moisture-Induced Crack Patterns for Cross Sections of Solid Wood and Glued Laminated Ttmber Exposed to a Realistic Climate Condition";
Construction and Building Materials,
271
(2021),
121775.
Zusätzliche Informationen
M. Autengruber, M. Lukacevic, G. Wenighofer, R. Mauritz, J. Füssl:
"Finite-element-based concept to predict stiffness, strength, and failure of wood composite I-joist beams under various loads and climatic conditions";
Engineering Structures,
245
(2021),
112908;
S. 1
- 22.
Zusätzliche Informationen
M. Lukacevic, M. Autengruber, T. Raimer, J. Eberhardsteiner, J. Füssl:
"Effect of Cast-In-Place Concrete Application on Moisture Distribution in Timber-Concrete Composite Floors with Notched Connections, Investigated Via Finite Element Simulations";
Journal of Building Engineering,
42
(2021),
103005.
M. Autengruber, M. Lukacevic, J. Füssl:
"Finite-Element-Based Moisture Transport Model for Wood Including Free Water Above the Fiber Saturation Point";
International Journal of Heat and Mass Transfer,
161
(2020),
120228.
Zusätzliche Informationen
Beiträge in Tagungsbänden
F. Brandstätter, M. Autengruber, M. Lukacevic, J. Füssl:
"Numerical Simulation of Moisture-Induced Cracking in Wood exposed to Indoor Climate Conditions";
in: "Proceedings of the 8th European Concress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2022)",
International Center for Numerical Methods in Engineering (CIMNE),
2022,
Paper-Nr. 536,
1 S.
M. Autengruber, M. Lukacevic, J. Füssl:
"Heat and Mass Transfer Model for Wood Under Real Climate Conditions";
in: "Book of Abstracts of the International Conference on Computational Methods in Wood Mechanics - from Material Properties to Timber Structures (CompWood 2019)",
Linnaeus University,
2019,
ISBN: 978-91-88898-64-7.
M. Autengruber, M. Lukacevic, J. Eberhardsteiner, J. Füssl:
"A Numerical Simulation Tool for Coupled Heat and Mass Transfer in Wood";
in: "Programme & Book of Abstracts on Computational Methods in Wood Mechanics - from Material Properties to Timber Structures (CompWood 2017)",
TU Verlag,
Wien,
2017,
ISBN: 978-3-903024-49-6,
S. 62.
M. Autengruber, M. Lukacevic, J. Eberhardsteiner, J. Füssl:
"A Numerical Simulation Tool for Coupled Heat and Mass Transfer in Wood";
in: "Book of Abstracts of the XXI. St. Inter-Institute Seminar for Young Researchers",
Department of Structural Mechanics, Budapest University of Technology and Economics,
2017,
S. 6.
Vorträge und Posterpräsentationen (mit Tagungsband-Eintrag)
M. Autengruber, M. Lukacevic, C. Vida, S. Pech, J. Füssl:
"Computergestützte Modellierung im Holzbau - Herausforderungen und Möglichkeiten";
Vortrag: 25. Dresdner Baustatik-Seminar "Realität - Modellierung - Tragwerksplanung",
Dresden (Deutschland);
15.10.2021; in: "25. Dresdner Baustatik-Seminar: Realität - Modellierung - Tragwerksplanung",
TU-Dresden (Hrg.);
(2021),
ISSN: 1615-9705;
S. 131
- 160.
Zusätzliche Informationen
Vorträge und Posterpräsentationen (ohne Tagungsband-Eintrag)
M. Autengruber:
"Numerical Simulation of Moisture Transport in Wood Including Free Water Transport";
Vortrag: 14th World Congress in Computational Mechanics (WCCM) & ECCOMAS Congress 2020,
Paris, France;
11.01.2021
- 15.01.2021.
M. Autengruber:
"Heat and Mass Transfer Model for Wood Under Real Climate Conditions";
Vortrag: XV. International Conference on Computational Plasticity - Fundamentals and Applications (COMPLAS 2019),
Barcelona, Spain;
03.09.2019
- 05.09.2019.
M. Autengruber:
"Heat and Mass Transfer Model for Wood Under Real Climate Conditions";
Vortrag: International Conference on Computational Methods in Wood Mechanics - From Material Properties to Timber Structures (CompWood 2019),
Växjo, Sweden;
17.06.2019
- 19.06.2019.
M. Autengruber:
"Numerical Simulation of Moisture Induced Cracking Behaviour in Wood Cross Sections Under Realclimate Conditions";
Vortrag: 6th European Conference on Computational Fluid Dynamics (ECCM - ECFD 2018),
Glasgow, United Kingdom;
11.06.2018
- 15.06.2018.
M. Autengruber:
"Numerical Simulation of Moisture Induced Cracking Behaviour in Wood Cross Sections Under Realclimate Conditions";
Vortrag: Engineering Mechanics Institute Conference 2018 (EMI 2018),
Cambridge, Massachusetts, USA;
29.05.2018
- 01.06.2018.
M. Autengruber:
"A Numerical Simulation Tool for Coupled Heat and Mass Transfer in Wood";
Vortrag: XXIst. Inter-Institute Seminar for Young Researchers,
Budapest, Hungary;
06.10.2017
- 08.10.2017.
M. Autengruber:
"A Numerical Simulation Tool for Coupled Heat and Mass Transfer in Wood";
Vortrag: Conference on Computaional Methods in Wood Mechanics - From Material Properties to Timber Structures (CompWood 2017),
Vienna, Austria;
07.06.2017
- 09.06.2017.
Dissertationen (eigene und begutachtete)
M. Autengruber:
"Numerical Simulation Concepts for Moisture Transport in Wood and Wood-Based Products, Below and Above the Fiber Saturation Point, to Predict Moisture-Induced Failure Mechanisms";
Betreuer/in(nen), Begutachter/in(nen): M. Lukacevic, J. Füssl, S. Fortino, E. Serrano;
Institut für Mechanik der Werkstoffe und Strukturen,
2021;
Rigorosum: 03/2021.
Diplom- und Master-Arbeiten (eigene und betreute)
F. Brandstätter:
"Numerisches Simulationskonzept zur Bestimmung der Feuchtebeanspruchung und dem resultierenden Rissverhalten in unterschiedlichen Holzquerschnitten in Abhängigkeit des Standortes in Österreich";
Betreuer/in(nen): M. Autengruber, M. Lukacevic, J. Füssl;
Institut für Mechanik der Werkstoffe un Strukturen,
2020;
Abschlussprüfung: 25.09.2020.
T. Raimer:
"Der Einfluss des Aufbringens von Frischbeton auf die Feuchtigkeitsverteilung in Holz-Beton-Verbundkonstruktionen mit Kerven, untersucht mittels numerischer Simulationen";
Betreuer/in(nen): M. Autengruber, M. Lukacevic, J. Füssl;
Institut für Mechanik der Werkstoffe un Strukturen,
2020;
Abschlussprüfung: 23.04.2020.
C. Gröstlinger:
"Numerische Simulation des feuchteinduzierten Rissverhaltens von Holzquerschnitten unter realer Klimabeanspruchung";
Betreuer/in(nen): M. Autengruber, M. Lukacevic, J. Füssl;
Institut für Mechanik der Werkstoffe und Strukturen,
2018;
Abschlussprüfung: 19.01.2018.
M. Autengruber:
"Modellierung und numerische Simulation des Feuchte- und Temperaturverhaltens von Holz-Aluminium-Verbundträgern";
Betreuer/in(nen): M. Lukacevic, J. Füssl, J. Eberhardsteiner;
Institut für Mechanik der Werkstoffe und Strukturen,
2016;
Abschlussprüfung: 17.06.2016.