TU Home
Diese Publikationsliste wurde automatisch aus den Publikationsdaten der Fakultät für Bauingenieurwesen erstellt. Wenn Sie komplexere Suchabfragen vornehmen wollen, rufen Sie bitte die Seite "Publikationen der Fakultät" direkt auf, oder verwenden Sie die globale Suchfunktion der Publikationsdatenbank der Technischen Universität Wien!


Publikationsdatenbank Home  

Publikationsliste für
Giuseppe Balduzzi
E202 - Institut für Mechanik der Werkstoffe und Strukturen
als Autorin / Autor bzw. wesentlich beteiligte Person

63 Datensätze (2016 - 2021)


Zeitschriftenartikel


  1. M. Aminbaghai, J. Murin, G. Balduzzi, J. Hrabovsky, G. Hochreiner, H.A. Mang:
    "Second-Order Torsional Warping Theory Considering the Secondary Torsion-Moment Deformation-Effect";
    Engineering Structures, 147 (2017), S. 724 - 739.

  2. G. Balduzzi, M. Aminbaghai, F. Auricchio, J. Füssl:
    "Planar Timoshenko-Like Model for Multilayer Non-Prismatic Beams";
    International Journal of Mechanics and Materials in Design, 14 (2018), S. 51 - 70.

  3. G. Balduzzi, M. Aminbaghai, E. Sacco, J. Füssl, J. Eberhardsteiner, F. Auricchio:
    "Non-Prismatic Beams: a Simple and Effective Timoshenko-Like Model";
    International Journal of Solids and Structures, 90 (2016), S. 236 - 250.

  4. G. Balduzzi, G. Hochreiner, J. Füssl:
    "Stress Recovery from One Dimensional Models for Tapered Bi-Symmetric Thin-Walled I Beams: Deficiencies in Modern Engineering Tools and Procedures";
    Thin-Walled Structures, 119 (2017), S. 934 - 945.

  5. G. Balduzzi, G. Hochreiner, J. Füssl, F. Auricchio:
    "Serviceability Analysis of Non-Prismatic Timber Beams: Derivation and Validation of New and Effective Straightforward Formulas";
    Open Journal of Civil Engineering, 7 (2017), S. 32 - 62.

  6. G. Balduzzi, S. Morganti, F. Auricchio, A. Reali:
    "Non-Prismatic Timoshenko-Like Beam Model: Numerical Solution via Isogeometric Collocation";
    Computers and Mathematics with Applications, 74 (2017), S. 1531 - 1541.

  7. G. Balduzzi, S. Morganti, J. Füssl, M. Aminbaghai, A. Reali, F. Auricchio:
    "Modeling the Non-Trival Behavior of Anisotropic Beams: A Simple Timoshenko Beam with Enhanced Stress Recovery and Constitutive Relations";
    Composite Structures, 229 (2019), S. 111265.

  8. G. Balduzzi, L. Zelaya-Lainez, G. Hochreiner, Ch. Hellmich:
    "Dog-Bone Samples may not Provide Direct Access to the Longitudinal Tensile Strength of Clear-Wood";
    The Open Civil Engineering Journal, 15 (2021), S. 1 - 12.

  9. V. Mercuri, G. Balduzzi, D. Asprone, F. Auricchio:
    "Structural Analysis of Non-Prismatic Beams: Critical Issues, Accurate Stress Recovery, and Analytical Definition of the Finite Element (FE) Stiffness Matrix";
    Engineering Structures, 213 (2020), 110252.

  10. J. Murin, M. Aminbaghai, J. Hrabovsky, G. Balduzzi, M. Dorn, H.A. Mang:
    "Torsional Warping Eigenmodes of FGM Beams with Longitudinally Varying Material Properties";
    Engineering Structures, 175 (2018), S. 912 - 925.

  11. L. Zelaya-Lainez, G. Balduzzi, O. Lahayne, N. Ikeda, F. Raible, C. Herzig, W. Nischkauer, A. Limbeck, Ch. Hellmich:
    "Jaws of Platynereis dumerilii: Miniature Biogenic Structures with Hardness Properties Similar to Those of Crystalline Metals";
    JOM, 73 (2021), S. 2390 - 2402.


Beiträge in Tagungsbänden


  1. G. Balduzzi, G. Alaimo, M. Aminbaghai, F. Auricchio:
    "A Simple and Effective Timoshenko-Like Model for Beams with Complex Geometry and Variable Infill";
    in: "Abstracts of the Conference on Simulation for Additive Manufacturing", Technische Universität München, Munich, Germany, 2017, S. 165 - 166.

  2. G. Balduzzi, M. Aminbaghai, J. Füssl:
    "Linear Response of a Planar FGM Beam with Non-Linear Variation of the Mechanical Properties";
    in: "Proceedings of the 8th ECCOMAS Thematic Conference on Smart Structures and Materials (SMART 2017)", International Center for Numerical Methods in Engineering (CIMNE), 2017, S. 1285 - 1294.

  3. G. Balduzzi, J. Füssl, F. Auricchio, E. Sacco:
    "Remarks on the Shear Stress Distribution within the Beam Cross-Section in Non-Linear Regime";
    in: "Proceedings of the 6th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2017)", National Technical University of Athens, 2017.

  4. G. Balduzzi, G. Hochreiner, J. Füssl, F. Auricchio:
    "Performance Evaluation of New Straightforward Formulas for the Serviceability Analysis of Cambered Timber Beams";
    in: "CD-ROM Proceedings of the World Conference on Timber Engineering (WCTE 2016)", J. Eberhardsteiner, W. Winter, A. Fadai, M. Pöll (Hrg.); herausgegeben von: Vienna University of Technology; Grafisches Zentrum HTU GmbH, Vienna, 2016, ISBN: 978-3-903039-00-1, Paper-Nr. 821, 8 S.

  5. G. Balduzzi, G. Hochreiner, E. Sacco, F. Auricchio, J. Füssl:
    "Remarks on the Effectiveness of Stress-Distribution Recovery Formulas for Mono-Symmetric Thin Walled Beams";
    in: "Proceedings of the XXVI Giornate Italiane della Costruzione in Acciaio", Collegio Dei Tecnici dell'Acciaio, 2017.

  6. G. Balduzzi, G. Kandler, J. Füssl:
    "Estimation of GLT Beam Stiffness Based on Homogenized Board Mechanical Properties and Composite Beam Theory";
    in: "Proceedings of the 6th European Conference on Computational Mechanics (ECCM6-ECFD7)", The University of Glasgow and The University of Edinburgh, 2018, 12 S.

  7. G. Balduzzi, G. Kandler, J. Füssl:
    "Estimation of the Bending Stiffness of GLT Beams: A Novel Procedure Based on Enhanced Analysis of the Boards' Stiffness and First Order Beam Models";
    in: "Programme & Book of Abstracts on Computational Methods in Wood Mechanics - from Material Properties to Timber Structures (CompWood 2017)", TU Verlag, Wien, 2017, ISBN: 978-3-903024-49-6, S. 93.

  8. G. Balduzzi, S. Morganti, F. Auricchio, A. Reali:
    "Mixed Isogeometric Collocation Method for Non-Prismatic Planar Timoshenko-Like Beam Models";
    in: "Proceedings of the International Conference on Isogeometric Analysis (IGA 2017)", International Center for Numerical Methods in Engineering (CIMNE), 2017, Paper-Nr. 84, 1 S.

  9. G. Balduzzi, S. Morganti, J. Füssl, M. Aminbaghai, A. Reali, F. Auricchio:
    "A Multilayer Anisotropic Beam Model Based on Timoshenko Kinematics, Enhanced Stress Recovery, and Effective Constitutive Relations";
    in: "Book of Abstracts of the 5th ECCOMAS Young Investigators Concerence (YIC 2019)", AKNET-Press, 2019, S. 189 - 190.

  10. G. Balduzzi, S. Morganti, J. Füssl, M. Aminbaghai, A. Reali, F. Auricchio:
    "Evidences of the Non-Negligible Effects of the Orientation of Material Principal Directions on the Structural Response of a Planar Anisotropic Beam";
    in: "Book of Abstracts of the 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019)", TU Verlag, 2019, ISBN: 978-3-903024-84-7, S. 183 - 184.

  11. G. Balduzzi, S. Morganti, J. Füssl, M. Aminbaghai, A. Reali, F. Auricchio:
    "Timoshenko Beam with Enhanced Stress Recovery and Constitutive Relations Describing the Effects of Variable Grain Direction on the Behavior of a GLT Beam";
    in: "Book of Abstracts of the International Conference on Computational Methods in Wood Mechanics - From Material Properties to Timber Structures", Linnaeus University, 2019, ISBN: 978-91-88898-64-7, S. 75.

  12. G. Balduzzi, S. Morganti, J. Füssl, A. Reali, F. Auricchio:
    "Anisotropic Beams with Variable Fiber Directions: Analystical Modeling and Isogeometric Collocation";
    in: "Book of Abstracts of the 14th World Congress in Computational Mechanics and ECCOMAS Congress (virtual)", International Center for Numerical Methods in Engineering (CIMNE), 2021, 1 S.

  13. G. Balduzzi, S. Morganti, J. Füssl, A. Reali, F. Auricchio:
    "Beams with Variable Mechanical Properties: Planar Timoshenko-like Model and Numerical Solution Via Iso-Geometric Collocation";
    in: "Book of Abstracts of the 13th World Congress in Computational Mechanics (WCCM 2018)", International Association for Computational Mechanics (IACM), 2018, 1 S.

  14. G. Balduzzi, S. Morganti, E. Sacco, F. Auricchio, J. Füssl, A. Reali:
    "Multilayer Beam Model: Numerical Solution Via Isogeometric Collocation Method";
    in: "Abstracts and Programme of the 6th ECCOMAS Thematic Conference on the Mechanical Response of Composites (COMPOSITES 2017)", Eindhoven University of Technology, 2017, ISBN: 978-90-386-4366-3, Paper-Nr. 65, 1 S.

  15. G. Balduzzi, E. Sacco, F. Auricchio, J. Füssl:
    "Non-Prismatic Thin-Walled Beams: Critical Issues and Effective Modeling";
    in: "Proceedings of the XXIII Conference of the Italian Association of Theoretical and Applied Mechanics", Universita' Degli Studi di Salerno, 2017, ISBN: 978-889-42484-7-0, S. 301 - 308.

  16. G. Balduzzi, E. Sacco, F. Auricchio, J. Füssl:
    "Tapered Mono-Symmetri Thin Walled Beams: Critial Issues in the Evaluation of Cross-Section Resistance";
    in: "Proceedings of the 10th European Solid Mechanics Conference (ESMC 2018)", European Mechanics Society (EUROMECH), 2018, Paper-Nr. 1300, 1 S.

  17. G. Balduzzi, L. Zelaya-Lainez, G. Hochreiner, Ch. Hellmich:
    "Dog-Bone Specimens May not Provide Direct Access to Clear Wood Tensile Strength Parallel to Grain: Analyticial and Numerical Evidences";
    in: "Book of Abstracts of the 37th Danubia Adria Symposium on Advances in Experimental Mechanics", Johannes Kepler University, 2021, ISBN: 978-3-9504997-0-4, S. 133 - 134.

  18. G. Balduzzi, L. Zelaya-Lainez, N. Ikeda, F. Raible, Ch. Hellmich:
    "Mechanical Analysis of Platynereis Dumerilii Chaetae: Preliminary Consideration Based on Kinematics";
    in: "Book of Abstracts of the 25th Congress of the European Society of Biomechanics", TU Verlag, 2019, ISBN: 978-3-903024-96-0, S. 24.

  19. N. Ikeda, L. Zelaya-Lainez, G. Balduzzi, Ch. Hellmich, F. Raible:
    "Genetic and Cell Biological Control of 3D Printing in the Marine Organism Platynereis Dumeriili";
    in: "Book of Abstracts of the 25th Congress of the European Society of Biomechanics", TU Verlag, 2019, ISBN: 978-3-903024-96-0, S. 672.

  20. V. Mercuri, G. Balduzzi, D. Asprone, F. Auricchio:
    "2D Non-Prismatic Beam Model for Stiffness Matrix Evaluation";
    in: "CD-ROM Proceedings of the World Conference on Timber Engineering (WCTE 2016)", J. Eberhardsteiner, W. Winter, A. Fadai, M. Pöll (Hrg.); herausgegeben von: Vienna University of Technology; Grafisches Zentrum HTU GmbH, Vienna, 2016, ISBN: 978-3-903039-00-1, Paper-Nr. 889, 8 S.

  21. L. Zelaya-Lainez, G. Balduzzi, N. Ikeda, F. Raible, Ch. Hellmich:
    "Deciphering the Mechanical Function of the Bristles from Platynereis Dumerilii Larvae: A Kinematic Approach";
    in: "Book of Abstract of the Engineering Mechanics Institute 2019 Conference", ASCE, 2019, S. 317.

  22. L. Zelaya-Lainez, G. Balduzzi, N. Ikeda, F. Raible, Ch. Hellmich:
    "Platynereis Dumerilii Chaetae: Mechanical Loading Estimation from Kinematics in Larva Stage";
    in: "Book of Extended Abstracts of the 36th Danubia Adria Symposium on Advances in Experimental Mechanics", University of West Bohemia, 2019, ISBN: 978-80-261-0876-4, S. 159 - 160.

  23. L. Zelaya-Lainez, G. Balduzzi, O. Lahayne, N. Ikeda, F. Raible, C. Herzig, W. Nischkauer, A. Limbeck, Ch. Hellmich:
    "Jaws of Platynereis dumerilii: Miniature Biogenic 3D Printed Structures with Hardness Properties Similar to Those of Crystalline Metals";
    in: "Book of Abstracts of the 37th Danubia Adria Symposium on Advances in Experimental Mechanics", Johannes Kepler University, 2021, ISBN: 978-3-9504997-0-4, S. 146 - 147.

  24. L. Zelaya-Lainez, O. Lahayne, G. Balduzzi, Ch. Hellmich:
    "Micromechanics of Non-Embedded Spruce Wood: Novel Polishing and Indentation Protocol";
    in: "Book of Extended Abstracts of the 36th Danubia Adria Symposium on Advances in Experimental Mechanics", University of West Bohemia, 2019, ISBN: 978-80-261-0876-4, S. 157 - 158.


Editorials in Tagungsbänden


  1. G. Balduzzi, E. Sacco, F. Auricchio, J. Füssl:
    "Non-Prismatic Multi-Layered Planar Beams: Critical Issues and Effective Modelling Approaches";
    in: "Proceedings of the 3rd International Conference on Mechanics of Composites", Universita Di Bologna, 2017, ISBN: 978-88-93850292, Paper-Nr. 296, 1 S.


Vorträge und Posterpräsentationen (ohne Tagungsband-Eintrag)


  1. G. Balduzzi:
    "A Multilayer Anisotropic Beam Model Based on Timoshenko Kinematics, Enhanced Stress Recovery, and Effective Constitutive Relations";
    Vortrag: The 5th ECCOMAS Young Investigators Conference (YIC 2019), Krakow, Poland; 01.09.2019 - 06.09.2019.

  2. G. Balduzzi:
    "A Simple and Effective Timoshenko-Like Model for Beams with Complex Geometry and Variable Infill";
    Vortrag: 1st International Conference on Simulation for Additive Manufacturing, Munich, Germany; 11.10.2017 - 13.10.2017.

  3. G. Balduzzi:
    "Anisotropic Beams with Variable Fiber Directions: Analystical Modeling and Isogeometric Collocation";
    Vortrag: 14th World Congress on Computational Mechanics (WCCM) - ECCOMAS Congress 2020 (online), Paris, France; 11.01.2021 - 15.01.2021.

  4. G. Balduzzi:
    "Beams with Variable Mechanial Properties: Planar Tomoshenko-Like Model and Nuemrical Solution via Iso-Geometric Colloation";
    Vortrag: 13th World Congress in Computational Mechanics (WCCM 2018), New York, USA; 22.07.2018 - 27.07.2018.

  5. G. Balduzzi:
    "Estimation of GLT Beam Stiffness Based on Homogenized Board Mechanical Properties and Composite Beam Theory";
    Vortrag: 6th European Conference on Computational Fluid Dynamics (ECCM - ECFD 2018), Glasgow, United Kingdom; 11.06.2018 - 15.06.2018.

  6. G. Balduzzi:
    "Estimation of the Bending Stiffness of GLT Beams: A Novel Procedure Based on Enhanced Analysis of the Boards' Stiffness and First Order Beam Models";
    Vortrag: Conference on Computaional Methods in Wood Mechanics - From Material Properties to Timber Structures (CompWood 2017), Vienna, Austria; 07.06.2017 - 09.06.2017.

  7. G. Balduzzi:
    "Evidences of the Non-Negligible Effects of the Orientation of Material Principal Directions on the Structural Response of a Planar Anisotropic Beam";
    Vortrag: 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019), Vienna, Austria; 18.02.2019 - 22.02.2019.

  8. G. Balduzzi:
    "Influence of Variable Grain Direction on Timber Beam Behavior";
    Vortrag: Engineering Mechanics Institute Conference 2018 (EMI 2018), Cambridge, Massachusetts, USA; 29.05.2018 - 01.06.2018.

  9. G. Balduzzi:
    "Linear Response of a Planar FGM Beam with Non-Linear Variation of the Mechanical Properties";
    Vortrag: 8th ECCOMAS Thematic Conference on Smart Structures and Materials (SMART 2017), Madrid, Spain; 05.06.2017 - 08.06.2017.

  10. G. Balduzzi:
    "Mechanical Analysis of Platynereis Dumerilii Chaetae: Preliminary Consideration Based on Kinematics";
    Vortrag: 25th Congress of the European Society of Biomechanics (ESB 2019), Vienna, Austria; 07.07.2019 - 10.07.2019.

  11. G. Balduzzi:
    "Mixed Isogeometric Collocation Method for Non-Prismatic Planar Timoshenko-Like Beam Models";
    Vortrag: International Conference on Isogeometric Analysis (IGA 2017), Pavia, Italy; 11.09.2017 - 13.09.2017.

  12. G. Balduzzi:
    "Multi-Layer Anisotropic Beam with Variable Fiber Directions: Enhanced Stress Recovery and Numerical Solution Via Isogeometric Collocation";
    Vortrag: International Conference on Isogeometric Analysis (IGA 2019), Munich, Germany; 18.09.2019 - 20.09.2019.

  13. G. Balduzzi:
    "Multiplayer Beam Model: Numerical Solution Via Isogeometric Collocation Method";
    Vortrag: 6th ECCOMAS Thematic Conference on the Mechanical Response of Composites (COMPOSITES 2017), Eindhoven, The Netherlands; 20.09.2017 - 22.09.2017.

  14. G. Balduzzi:
    "Non-prismatic Beam Modeling: Critical Issues and Applications";
    Vortrag: Department of Civil and Mechanical Engineering; University of Cassino and Southern Lazio, Cassino, Italy; 12.01.2017.

  15. G. Balduzzi:
    "Non-Prismatic Multi-Layered Planar Beams: Critical Issues and Effective Modeling Approaches";
    Vortrag: 3rd International Conference on Mechanics of Composites, Bologna, Italy; 04.07.2017 - 07.07.2017.

  16. G. Balduzzi:
    "Non-Prismatic Thin-Walled Beams: Critical Issues and Effective Modeling";
    Vortrag: XXIII th Conference of the Italian Association of Theoretical and Applied Mechanics (AIMETA 2017), Salerno, Italy; 04.09.2017 - 07.09.2017.

  17. G. Balduzzi:
    "Performance Evaluation of New Straightforward Formulas for the Serviceability Analysis of Cambered Timber Beams";
    Vortrag: World Conference on Timber Engineering (WCTE 2016), Vienna, Austria; 22.08.2016 - 25.08.2016.

  18. G. Balduzzi:
    "Platynereis Dumerilii Chaetae: Mechanical Loading Estimation from Kinematics in Larva Stage";
    Vortrag: 36th Danubia-Adria Symposium on Advanced in Experimental Mechanics, Plzen, Czech Republic; 24.09.2019 - 27.09.2019.

  19. G. Balduzzi:
    "Remarks on the Effectiveness of Stress-Distribution Recovery Formulas for Mono-Symmetric Thin Walled Beams";
    Vortrag: XXVI Giornate Italiane della Costruzione in Acciaio, Venice, Italy; 28.09.2017 - 29.09.2017.

  20. G. Balduzzi:
    "Remarks on the Shear Stress Distribution within the Beam Cross-Section in Non-Linear Regime";
    Vortrag: 6th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2017), Rhodes Island, Greece; 15.06.2017 - 17.06.2017.

  21. G. Balduzzi:
    "Tapered Mono-Symmetric Thin Walled Beams: Critical Issues in the Evaluation of Cross-Section Resistance";
    Vortrag: 10th European Solid Mechanics Conference (ESMC 2018), Bologna, Italy; 02.07.2018 - 06.07.2018.

  22. G. Balduzzi:
    "Timoshenko Beam with Enhanced Stress Recovery and Constitutive Relations Describing the Effects of Variable Grain Direction on the Behavior of a GLT Beam";
    Vortrag: International Conference on Computational Methods in Wood Mechanics - From Material Properties to Timber Structures (CompWood 2019), Växjo, Sweden; 17.06.2019 - 19.06.2019.

  23. G. Balduzzi, L. Zelaya-Lainez, G. Hochreiner, Ch. Hellmich:
    "Dog-Bone Specimens May Not Provide Direct Access to Clear Wood Tensile Strength Parallel to Grain: Analytical and Numerical Evidences";
    Poster: 37th Danubia-Adria Symposium on Advances in Experimental Mechanics, Linz, Austria; 21.09.2021 - 24.09.2021.

  24. N. Ikeda, L. Zelaya-Lainez, G. Balduzzi, Ch. Hellmich, F. Raible:
    "Genetic and Cell Biological Control of 3D Printing in the Marine Organism Platynereis Dumeriili";
    Poster: 25th Congress of the European Society of Biomechanics (ESB 2019), Vienna, Austria; 07.07.2019 - 10.07.2019.

  25. L. Zelaya-Lainez, G. Balduzzi, N. Ikeda, F. Raible, Ch. Hellmich:
    "Platynereis Dumerilii Chaetae: Mechanical Loading Estimation from Kinematics in Larva Stage";
    Poster: 36th Danubia-Adria Symposium on Advanced in Experimental Mechanics, Plzen, Czech Republic; 24.09.2019 - 27.09.2019.

  26. L. Zelaya-Lainez, G. Balduzzi, O. Lahayne, Ch. Hellmich:
    "Micromechanics of Non-Embedded Spruce Wood: Novel Polishing and Indentation Protocol";
    Poster: 36th Danubia-Adria Symposium on Advanced in Experimental Mechanics, Plzen, Czech Republic; 24.09.2019 - 27.09.2019.

  27. L. Zelaya-Lainez, G. Balduzzi, O. Lahayne, N. Ikeda, F. Raible, C. Herzig, W. Nischkauer, A. Limbeck, Ch. Hellmich:
    "Jaws of Platynereis dumerilii: Biologically 3D Printed Miniature Biogenic Structures with Hardness Properties Similar to Those of Crystalline Metals";
    Poster: 37th Danubia-Adria Symposium on Advances in Experimental Mechanics, Linz, Austria; 21.09.2021 - 24.09.2021.