Publication list for
Markus Lukacevic
E202 - Institute for Mechanics of Materials and Structures
as author or essentially involved person
94 records (2009 - 2022)
Publications in Scientific Journals
S. Pech, M. Lukacevic, J. Füssl:
"A Hybrid Multi-Phase Field Model to Describe Cohesive Failure in Orthotropic Materials, Assessed by Modeling Failure Mechanisms in Wood";
Engineering Fracture Mechanics,
271
(2022),
108591;
1
- 19.
C. Vida, M. Lukacevic, J. Eberhardsteiner, J. Füssl:
"Modeling Approach to Estimate the Bending Strength and Failure Mechanisms of Glued Laminated Timber Beams";
Engineering Structures,
255
(2022),
113862.
M. Autengruber, M. Lukacevic, C. Gröstlinger, J. Eberhardsteiner, J. Füssl:
"Numerical Assessment of Wood Moisture Content-Based Assignments to Service Classes in EC5 and a Prediction Concept of Moisture-Induced Stresses Solely Using Relative Humidity Data";
Engineering Structures,
245
(2021),
112849.
M. Autengruber, M. Lukacevic, C. Gröstlinger, J. Füssl:
"Finite-Element-Based Prediction of Moisture-Induced Crack Patterns for Cross Sections of Solid Wood and Glued Laminated Ttmber Exposed to a Realistic Climate Condition";
Construction and Building Materials,
271
(2021),
121775.
More information
M. Autengruber, M. Lukacevic, G. Wenighofer, R. Mauritz, J. Füssl:
"Finite-element-based concept to predict stiffness, strength, and failure of wood composite I-joist beams under various loads and climatic conditions";
Engineering Structures,
245
(2021),
112908;
1
- 22.
More information
M. Lukacevic, M. Autengruber, T. Raimer, J. Eberhardsteiner, J. Füssl:
"Effect of Cast-In-Place Concrete Application on Moisture Distribution in Timber-Concrete Composite Floors with Notched Connections, Investigated Via Finite Element Simulations";
Journal of Building Engineering,
42
(2021),
103005.
S. Pech, M. Lukacevic, J. Füssl:
"A Robust Multisurface Return-Mapping Algorithm and Its Implementation in Abaqus";
Finite Elements in Analysis and Design,
190
(2021),
103531;
1
- 9.
M. Autengruber, M. Lukacevic, J. Füssl:
"Finite-Element-Based Moisture Transport Model for Wood Including Free Water Above the Fiber Saturation Point";
International Journal of Heat and Mass Transfer,
161
(2020),
120228.
More information
M. Li, J. Füssl, M. Lukacevic, J. Eberhardsteiner, C. Martin:
"An Algorithm for Adaptive Introduction and Arrangement of Velocity Discontinuities within 3D Finite-Element-Based Upper Bound Limit Analysis Approaches";
Computer Methods in Applied Mechanics and Engineering,
348
(2019),
875
- 911.
M. Li, J. Füssl, M. Lukacevic, C. Martin, J. Eberhardsteiner:
"Bending Strength Predictions of Cross-Laminated Timber Plates Subjected to Concentrated Loading Using 3D Finite-Element-Based Limit Analysis Approaches";
Composite Structures,
220
(2019),
912
- 925.
M. Lukacevic, G. Kandler, M. Hu, A. Olsson, J. Füssl:
"A 3D Model for Knots and Related Fiber Deviations in Sawn Timber for Prediction of Mechanical Properties of Boards";
Materials & Design,
166
(2019),
107617.
S. Pech, G. Kandler, M. Lukacevic, J. Füssl:
"Metamodel Assisted Optimization of Glued Laminated Timber Beams by Using Metaheuristic Algorithms";
Engineering Applications of Artificial Intelligence,
79
(2019),
129
- 141.
H. Hengl, W. Kluger-Eigl, M. Lukacevic, R. Blab, J. Füssl:
"Horizontal Deformation Resistance of Paving Block Superstructures - Influence of Paving Block Type, Laying Pattern, and Joint Behaviour";
International Journal of Pavement Research and Technology,
11
(2018),
846
- 860.
G. Kandler, M. Lukacevic, J. Füssl:
"Experimental Study on Glued Laminated Timber Beams with Well-Known Knot Morphology";
European Journal of Wood and Wood Products,
76
(2018),
1435
- 1452.
More information
G. Kandler, M. Lukacevic, S. Wolff, J. Füssl:
"Stochastic Engineering Framework for Timber Structural Elements";
Beton- und Stahlbetonbau,
113
(2018),
96
- 102.
G. Kandler, M. Lukacevic, C. Zechmeister, S. Wolff, J. Füssl:
"Stochastic Engineering Framework for Timber Structural Elements and Its Application to Glued Laminated Timber Beams";
Construction and Building Materials,
190
(2018),
573
- 592.
M. Li, J. Füssl, M. Lukacevic, J. Eberhardsteiner, C. Martin:
"A Numerical Upper Bound Formulation with Sensibly-Arranged Velocity Discontinuities and Orthotropic Material Strength Behaviour";
Journal of Theoretical and Applied Mechanics,
56
(2018),
2;
417
- 433.
M. Li, J. Füssl, M. Lukacevic, J. Eberhardsteiner, C. Martin:
"Strength Predictions of Clear Wood at Multiple Scales Using Numerical Limit Analysis Approaches";
Computers and Structures,
196
(2018),
200
- 216.
J. Füssl, M. Li, M. Lukacevic, J. Eberhardsteiner, C. Martin:
"Comparison of Unit Cell-Based Computational Methods for Predicting the Strength of Wood";
Engineering Structures,
141
(2017),
427
- 443.
G. Kandler, M. Lukacevic, J. Füssl:
"Ein Algorithmus zur Rekonstruktion von 3D Astgeometrien und die Einbettung dieser Information in stochastische Konzepte für Brettschichtholz";
ÖIAZ - Österreichische Ingenieur- und Architektenzeitschrift,
162
(2017),
105
- 112.
T. Kiefer, H. Kariem, M. Lukacevic, J. Füssl:
"The Compressive Strength of Vertically Perforated Clay Block Masonry Predicted by Means of a Unit-Cell Type Numerical Simulation Tool Taking Discrete Cracking into Account";
Construction and Building Materials,
150
(2017),
24
- 34.
M. Lukacevic, J. Füssl, J. Eberhardsteiner:
"Eine numerische Methode zur Beschreibung von Holzversagen - von der Holzzelle bis zu Holzprodukten";
ÖIAZ - Österreichische Ingenieur- und Architektenzeitschrift,
162
(2017),
17
- 24.
M. Lukacevic, W. Lederer, J. Füssl:
"A Microstructure-Based Multisurface Failure Criterion for the Description of Brittle and Ductile Failure Mechanisms of Clear-Wood";
Engineering Fracture Mechanics,
176
(2017),
83
- 99.
G. Kandler, M. Lukacevic, J. Füssl:
"An Algorithm for the Geometric Reconstruction of Knots within Timber Boards Based on Fibre Angle Measurements";
Construction and Building Materials,
124
(2016),
945
- 960.
M. Lukacevic, J. Füssl:
"Application of a Multisurface Discrete Crack Model for Clear Wood Taking into Account the Inherent Microstructural Characteristics of Wood Cells";
Holzforschung,
70
(2016),
9;
845
- 853.
M. Lukacevic, J. Füssl, J. Eberhardsteiner:
"Discussion of Common and New Indicating Properties for the Strength grading of Wooden Boards";
Wood Science and Technology,
49
(2015),
551
- 576.
M. Lukacevic, J. Füssl, R. Lampert:
"Failure Mechanisms of Clear Wood Identified at Wood Cell Level by an Approach Based on the Extended Finite Element Method";
Engineering Fracture Mechanics,
144
(2015),
158
- 175.
J. Füssl, M. Lukacevic, G. Kandler, J. Eberhardsteiner:
"A Comprehensive Mechanical Modeling Approach for the Design of Wood-based Products";
IACM Expressions,
35
(2014),
8
- 12.
C. Hackspiel, K. de Borst, M. Lukacevic:
"A Numerical Simulation Tool for Wood Grading Model Development";
Wood Science and Technology,
48
(2014),
3;
633
- 649.
C. Hackspiel, K. de Borst, M. Lukacevic:
"A Numerical Simulation Tool for Wood grading: Model Validation and Parameter Studies";
Wood Science and Technology,
48
(2014),
3;
651
- 669.
M. Lukacevic, J. Füssl:
"Numerical Simulation Tool for Wooden boards with a Physically Based Approach to Identify Structural Failure";
European Journal of Wood and Wood Products,
72
(2014),
4;
497
- 508.
M. Lukacevic, J. Füssl, M. Griessner, J. Eberhardsteiner:
"Performance Assessment of a Numerical Simulation Tool for Wooden Boards with Knots by Means of Full-Field Deformation Measurements";
Strain,
50
(2014),
301
- 317.
Contributions to Books
J. Füssl, M. Lukacevic, S. Pillwein, H. Pottmann:
"Computational Mechanical Modelling of Wood - From Microstructural Characteristics Over Wood-Based Products to Advanced Timber Structures";
in: "Digital Wood Design, Lecture Notes in Civil Engineering",
Springer,
Cham,
2019,
ISBN: 978-3-030-03675-1,
639
- 673.
Contributions to Proceedings
F. Brandstätter, M. Autengruber, M. Lukacevic, J. Füssl:
"Numerical Simulation of Moisture-Induced Cracking in Wood exposed to Indoor Climate Conditions";
in: "Proceedings of the 8th European Concress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2022)",
International Center for Numerical Methods in Engineering (CIMNE),
2022,
Paper ID 536,
1 pages.
R. Reismüller, M. Lukacevic, T. Kiefer, J. Füssl:
"A Finite-Element-Based Unit Cell Approach for Simulating Vertically Perforated Clay Block Masonry";
in: "Proceedings of the 8th European Concress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2022)",
International Center for Numerical Methods in Engineering (CIMNE),
2022,
Paper ID 846,
1 pages.
M. Autengruber, M. Lukacevic, J. Füssl:
"Heat and Mass Transfer Model for Wood Under Real Climate Conditions";
in: "Book of Abstracts of the International Conference on Computational Methods in Wood Mechanics - from Material Properties to Timber Structures (CompWood 2019)",
Linnaeus University,
2019,
ISBN: 978-91-88898-64-7.
S. Pech, G. Kandler, M. Lukacevic, J. Füssl:
"Metamodel Assisted Optimization of Glued Laminated Timber Beams by Using Metaheuristic Algorithms";
in: "Book of Abstracts of the 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019)",
J. Eberhardsteiner, J. Schöberl (ed.);
TU Verlag,
2019,
ISBN: 978-3-903024-84-7,
438.
S. Pech, M. Lukacevic, J. Füssl:
"Phase Field Method-Based Modeling of Fracture in Wood";
in: "Programme & Proceedings of the China-Austria Forum for Postgraduates of Civil Engineering",
J. Zhang, B. Pichler (ed.);
Vienna University of Technology,
2019,
98
- 101.
S. Pech, M. Lukacevic, J. Füssl:
"Phase Field Method-Based Modeling of Fracture in Wood";
in: "Book of Abstracts of the International Conference on Computational Methods in Wood Mechanics - from Material Properties to Timber Structures (CompWood 2019)",
Linnaeus University,
2019,
ISBN: 978-91-88898-64-7,
17.
M. Lukacevic, J. Füssl, J. Eberhardsteiner:
"Simulating Failure Mechanisms in Wooden Boards with Knots by Means of a Microstructure-Based Multisurface Failure Criterion";
in: "Proceedings of the 2018 World Conference on Timber Engineering (WCTE 2018)",
The Korean Society of Wood Science Technology,
2018,
8 pages.
M. Autengruber, M. Lukacevic, J. Eberhardsteiner, J. Füssl:
"A Numerical Simulation Tool for Coupled Heat and Mass Transfer in Wood";
in: "Programme & Book of Abstracts on Computational Methods in Wood Mechanics - from Material Properties to Timber Structures (CompWood 2017)",
TU Verlag,
Wien,
2017,
ISBN: 978-3-903024-49-6,
62.
M. Autengruber, M. Lukacevic, J. Eberhardsteiner, J. Füssl:
"A Numerical Simulation Tool for Coupled Heat and Mass Transfer in Wood";
in: "Book of Abstracts of the XXI. St. Inter-Institute Seminar for Young Researchers",
Department of Structural Mechanics, Budapest University of Technology and Economics,
2017,
6.
G. Kandler, M. Lukacevic, J. Füssl:
"Experimental and Numerical Investigations on the Mechanical Behavior of Glued Laminated Timber";
in: "Programme & Book of Abstracts on Computational Methods in Wood Mechanics - from Material Properties to Timber Structures (CompWood 2017)",
TU Verlag,
Wien,
2017,
ISBN: 978-3-903024-49-6,
36.
M. Li, J. Füssl, M. Lukacevic, J. Eberhardsteiner:
"Numerical Limit Analysis Approaches for Strength Predictions of Cross-Laminated Timber Plates";
in: "Programme & Book of Abstracts on Computational Methods in Wood Mechanics - from Material Properties to Timber Structures (CompWood 2017)",
TU Verlag,
Wien,
2017,
ISBN: 978-3-903024-49-6,
90.
M. Lukacevic, J. Füssl, J. Eberhardsteiner:
"A Microstructure-Based Multisurface Failure Criterion for the Description of Brittle and Ductile Failure Mechanisms of Clear-Wood";
in: "Programme & Book of Abstracts on Computational Methods in Wood Mechanics - from Material Properties to Timber Structures (CompWood 2017)",
TU Verlag,
Wien,
2017,
ISBN: 978-3-903024-49-6,
28.
J. Füssl, M. Li, M. Lukacevic, J. Eberhardsteiner, C. Martin:
"Three Different Methods for Predicting the Strength Behavior of Clear Wood - A Performance Comparison and Basis for a Combined Approach";
in: "CD-ROM Proceedings of the World Conference on Timber Engineering (WCTE 2016)",
J. Eberhardsteiner, W. Winter, A. Fadai, M. Pöll (ed.);
issued by: Vienna University of Technology;
Grafisches Zentrum HTU GmbH,
Vienna,
2016,
ISBN: 978-3-903039-00-1,
Paper ID 863,
10 pages.
G. Kandler, M. Lukacevic, J. Füssl:
"From the Knot Morphology of Individual Timber Baords to the Mechanical Properties of Glued Laminated Timber";
in: "CD-ROM Proceedings of the World Conference on Timber Engineering (WCTE 2016)",
J. Eberhardsteiner, W. Winter, A. Fadai, M. Pöll (ed.);
issued by: Vienna University of Technology;
Grafisches Zentrum HTU GmbH,
Vienna,
2016,
ISBN: 978-3-903039-00-1,
Paper ID 879,
10 pages.
M. Li, J. Füssl, M. Lukacevic, J. Eberhardsteiner, C. Martin:
"A Number Limit Analysis Approach for Predicting Strength of Clear Wood";
in: "CD-ROM Proceedings of the World Conference on Timber Engineering (WCTE 2016)",
J. Eberhardsteiner, W. Winter, A. Fadai, M. Pöll (ed.);
issued by: Vienna University of Technology;
Grafisches Zentrum HTU GmbH,
Vienna,
2016,
ISBN: 978-3-903039-00-1,
Paper ID 90,
10 pages.
M. Lukacevic, J. Füssl, J. Eberhardsteiner:
"A Numerical Approach to Describe Failure of Wood - From the Wood Cell Level Up to Wood-Based Products";
in: "CD-ROM Proceedings of the World Conference on Timber Engineering (WCTE 2016)",
J. Eberhardsteiner, W. Winter, A. Fadai, M. Pöll (ed.);
issued by: Vienna University of Technology;
Grafisches Zentrum HTU GmbH,
Vienna,
2016,
ISBN: 978-3-903039-00-1,
Paper ID 306,
9 pages.
J. Füssl, M. Lukacevic, G. Kandler, J. Eberhardsteiner:
"A Comprehensive Mechanical Modeling Approach for the Optimization of Wood-Based Products";
in: "Proceedings of the EUROMECH Colloquium 556 on Theoretical, Numerical, and Experimental Analyses in Wood Mechanics",
TU Dresden,
2015,
ISBN: 978-3-00-049643-1,
40
- 41.
M. Lukacevic, J. Füssl, J. Eberhardsteiner:
"A Numerical Approach to Describe Failure of Wood - From the Wood Cell Level up to Wood-Based Products";
in: "Proceedings of the 2015 Conference of the ASCE Engineering Mechanics Institute (EMI 2015)",
American Society of Civil Engineers (ASCE),
2015.
M. Lukacevic, J. Füssl, J. Eberhardsteiner:
"Influence of Knot Groups on Effective Mechanical Properties of Solid - Wood Based Products Determined by Means of 3D Finite - Element Simulations";
in: "Proceedings of the XII. International Conference on Computational Plasticity (COMPLAS XII)",
International Center for Numerical Methods in Engineering (CIMNE),
2013,
ISBN: 978-84-941531-5-0,
1 pages.
M. Lukacevic, K. de Borst, J. Füssl, J. Eberhardsteiner:
"Influence of Different Knot Groups on Effective Mechanical Properties of Solid-Wood Based Products Determined by Means of 3D Finite-Element Simulations";
in: "Book of Abstracts - 8th European Solid Mechanics Conference (ESMC 2012)",
issued by: TU Graz;
TU Graz,
2012,
ISBN: 978-3-85125-223-1,
2 pages.
M. Lukacevic, J. Füssl:
"A Criterion for the Effective Bending Strength of Wooden Boards with Knots Derived by a 3 D Finite-Element Tool";
in: "Forschungskolloquium Holzbau "Forschung und Praxis"",
Universität Stuttgart,
Stuttgart,
2012.
C. Hackspiel, M. Lukacevic, K. Hofstetter:
"Modeling of Growth Features for Future";
in: "Proceedings of the International Conference on Grading of Timber and Engineered Wood Products",
WoodWisdom-Net,
Helsinki,
2011, (invited),
84
- 89.
C. Hackspiel, K. Hofstetter, M. Lukacevic, J. Eberhardsteiner:
"A Numerical Simulation Tool for Wood Grading";
in: "Proceeding of the IV European Conference on Computational Mechanics (ECCM 2010)",
ECCOMAS,
2010,
2 pages.
C. Hackspiel, K. Hofstetter, M. Lukacevic, J. Eberhardsteiner:
"Computational Analysis of the Strength Reducing Effect of Knots in Timber";
in: "Proceedings of the 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics - Abstracts",
Centre for Infrastructure Engineering and Safety,
Sydney, Australia,
2010,
ISBN: 978-0-9808244-0-7,
1 pages.
Talks and Poster Presentations (with Proceedings-Entry)
M. Autengruber, M. Lukacevic, C. Vida, S. Pech, J. Füssl:
"Computergestützte Modellierung im Holzbau - Herausforderungen und Möglichkeiten";
Talk: 25. Dresdner Baustatik-Seminar "Realität - Modellierung - Tragwerksplanung",
Dresden (Deutschland);
10-15-2021; in: "25. Dresdner Baustatik-Seminar: Realität - Modellierung - Tragwerksplanung",
TU-Dresden (ed.);
(2021),
ISSN: 1615-9705;
131
- 160.
More information
M. Lukacevic, J. Füssl, S. Pech, C. Vida, J. Eberhardsteiner:
"Computational Mechanics Concepts for Wood-Based Products and Timber Structural Elements";
Talk: World Conference on Timber Engineering (WCTE2021),
Santiago, Chile;
08-09-2021
- 08-12-2021; in: "Proceedings of WCTE 2021 - World Conference on Timber Engineering",
Santiago, Chile
(2021).
More information
Talks and Poster Presentations (without Proceedings-Entry)
M. Lukacevic:
"Computational Modeling Approach for Wood-Based Products and Timber Structural Elements";
Talk: XVI. International Conference on Computational Plasticity, Fundamentals and Applications ( COMPLAS 2021),
Barcelona, Spain;
09-07-2021
- 09-10-2021.
S. Pech, M. Lukacevic, J. Füssl:
"Phase field method-based modeling of fracture in wood";
Talk: 16. International Conference on Computational Plasticity, Fundamentals and Applications,
Barcelona, Spain;
09-07-2021
- 09-09-2021.
More information
M. Lukacevic:
"Computational Mechanics Concepts for Mass Timber Products";
Talk: Engineering Mechanics Institute Conference and Probabilistic Mechanics & Reliability Conference (EMI/PMC 2021),
USA;
05-25-2021
- 05-28-2021.
M. Lukacevic:
"Computational Mechanics Concepts for Wood-Based Products and Timber Structural Elements";
Talk: 14th World Congress in Computational Mechanics (WCCM) & ECCOMAS Congress 2020,
Virtual Congress;
01-11-2021
- 01-15-2021.
M. Lukacevic:
"Fracture Simulations of Wooden Boards with Knots as a Basis for Timber Engineering Design Concepts";
Talk: XV. International Conference on Computational Plasticity - Fundamentals and Applications (COMPLAS 2019),
Barcelona, Spain;
09-03-2019
- 09-05-2019.
M. Lukacevic, J. Füssl, S. Pech, J. Eberhardsteiner:
"Simulation of Failure Mechanisms in Wooden Boards with Knots as a Basis for Timber Engineering Design Cencepts";
Poster: Engineering Mechanics Institute 2019 Conference,
Pasadena, CA, USA;
06-18-2019
- 06-21-2019.
M. Lukacevic:
"Simulating Failure Mechanisms in Wooden Boards with Knots by Means of a Microstructure-Based Multisurface Failure Criterion";
Talk: World Conference on Timber Engineering (WCTE 2018),
Seoul, Republic of Korea;
08-20-2018
- 08-23-2018.
M. Lukacevic:
"A Microstructure-Based Multisurface Failure Criterion and Its Application to Wooden Boards with Knots";
Talk: 6th European Conference on Computational Fluid Dynamics (ECCM - ECFD 2018),
Glasgow, United Kingdom;
06-11-2018
- 06-15-2018.
M. Lukacevic:
"From the Failure Mechanisms of Individual Wooden Boards to the Mechanical Behavior of Timber Structural Elements";
Talk: Engineering Mechanics Institute Conference 2018 (EMI 2018),
Cambridge, Massachusetts, USA;
05-29-2018
- 06-01-2018.
M. Lukacevic:
"A Microstructure-Based Multisurface Failure Criterion for the Description of Brittle and Ductile Failure Mechanisms of Clear-Wood";
Talk: Conference on Computaional Methods in Wood Mechanics - From Material Properties to Timber Structures (CompWood 2017),
Vienna, Austria;
06-07-2017
- 06-09-2017.
M. Lukacevic:
"A Numerical Approach to Describe Failure of Wood - From the Wood Cell Level Up to Wood-Based Products";
Talk: World Conference on Timber Engineering (WCTE 2016),
Vienna, Austria;
08-22-2016
- 08-25-2016.
M. Lukacevic:
"A Numerical Approach to Describe Failure of Wood - From the Wood Cell Level up to Wood-Based Products";
Talk: 7th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2016),
Crete Island, Greece;
06-05-2016
- 06-10-2016.
M. Lukacevic:
"A Numerical Approach to Describe Failure of Wood - From the Wood Cell Level up to Wood-Based Products";
Talk: Engineering Mechanics Institute Conference 2016 (EMI 2016),
Nashville, Tennessee, USA;
05-22-2016
- 05-25-2016.
M. Lukacevic:
"A Numerical Approach to Describe Failure of Wood - From the Wood Cell Level up to Wood-Based Products";
Talk: 2015 Conference of the ASCE Engineering Mechanics Institute (EMI 2015),
Stanford, CA, USA;
06-16-2015
- 06-20-2015.
M. Lukacevic:
"Numerical Simulation Tool for Wooden Boards with Knots";
Talk: EMI 2014 Engineering Mechanics Institute Conference,
Hamilton, Canada;
08-05-2014
- 08-08-2014.
M. Lukacevic:
"Numerical Simulation Tool for Wooden Boards with Knots";
Talk: 5th European Conference on Computational Mechanics (ECCM V),
Barcelona, Spain;
07-20-2014
- 07-25-2014.
M. Lukacevic:
"Influence of knot groups on effective mechanical properties of solid-wood based products determined by means of 3D Finite-Element simulations";
Talk: 12th International Conference on Computational Plasticity (COMPLAS XII),
Barcelona, Spain;
09-03-2013
- 09-05-2013.
M. Lukacevic:
"Influence of knot groups on effective mechanical properties of solid-wood based products determined by means of 3D Finite-Element simulations";
Talk: International Conference of the Engineering Mechanics Institute (EMI 2013),
Evanston, IL, USA;
08-04-2013
- 08-07-2013.
M. Lukacevic:
"A Criterion for the Effective Strength of Wooden Boards with Knots Derived by a 3D Finite-Element Tool";
Poster: COST Young Researchers' Forum at the 8th FTP Conference,
Barcelona, Spain;
03-11-2013
- 03-12-2013.
M. Lukacevic:
"Influence of Different Knot Groups on Effective Mechanical Properties of Solid-Wood Based Products Determined by Means of 3D Finite-Element Simulations";
Talk: 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012),
Wien;
09-10-2012
- 09-14-2012.
M. Lukacevic:
"Influence of Knot Configuration on Effective Strength Properties of Wooden Boards Determined";
Talk: Forschungskolloquium Holzbau "Forschung und Praxis",
Stuttgart;
03-12-2012
- 03-13-2012.
Doctor's Theses (authored and supervised)
M. Autengruber:
"Numerical Simulation Concepts for Moisture Transport in Wood and Wood-Based Products, Below and Above the Fiber Saturation Point, to Predict Moisture-Induced Failure Mechanisms";
Supervisor, Reviewer: M. Lukacevic, J. Füssl, S. Fortino, E. Serrano;
Institut für Mechanik der Werkstoffe und Strukturen,
2021;
oral examination: 03-2021.
M. Lukacevic:
"Numerical Simulation of Wooden Boards Considering Morphological Characteristics and Complex Failure Processes";
Supervisor, Reviewer: J. Eberhardsteiner, M. Kaliske;
Institut für Mechanik der Werkstoffe und Strukturen,
2014;
oral examination: 07-29-2014.
Diploma and Master Theses (authored and supervised)
M. Macho:
"Das mechanische Verhalten von Holz-Beton-Verbunddecken, untersucht mittels numerischer Simulationen";
Supervisor: J. Füssl, M. Lukacevic;
Institut für Mechanik der Werkstoffe und Strukturen,
2021;
final examination: 11-26-2021.
M. Senoner:
"3D-Finite-Elemente-Modell zur mechanischen Bewertung eines neuen Fenstermontagesystems unter Verwendung eines multifunktionalen Füllmaterials";
Supervisor: J. Füssl, M. Lukacevic;
Institut für Mechanik der Werkstoffe und Strukturen,
2021;
final examination: 10-22-2021.
P. Hacker:
"3D Finite Element Modeling of a Form Fitting Cross Laminated Timber Connection";
Supervisor: J. Füssl, M. Lukacevic;
Institut für Mechanik der Werkstoffe und Strukturen,
2020;
final examination: 12-17-2020.
F. Brandstätter:
"Numerisches Simulationskonzept zur Bestimmung der Feuchtebeanspruchung und dem resultierenden Rissverhalten in unterschiedlichen Holzquerschnitten in Abhängigkeit des Standortes in Österreich";
Supervisor: M. Autengruber, M. Lukacevic, J. Füssl;
Institut für Mechanik der Werkstoffe un Strukturen,
2020;
final examination: 09-25-2020.
C. Vida:
"Computergestützter Modellierungsansatz zur Bestimmung der Biegefestigkeit von Brettschichtholzträgern unter Berücksichtigung von Astgruppen und quasi-sprödem Materialversagen";
Supervisor: M. Lukacevic, S. Pech, J. Füssl;
Institut für Mechanik der Werkstoffe un Strukturen,
2020;
final examination: 09-25-2020.
T. Raimer:
"Der Einfluss des Aufbringens von Frischbeton auf die Feuchtigkeitsverteilung in Holz-Beton-Verbundkonstruktionen mit Kerven, untersucht mittels numerischer Simulationen";
Supervisor: M. Autengruber, M. Lukacevic, J. Füssl;
Institut für Mechanik der Werkstoffe un Strukturen,
2020;
final examination: 04-23-2020.
C. Gröstlinger:
"Numerische Simulation des feuchteinduzierten Rissverhaltens von Holzquerschnitten unter realer Klimabeanspruchung";
Supervisor: M. Autengruber, M. Lukacevic, J. Füssl;
Institut für Mechanik der Werkstoffe und Strukturen,
2018;
final examination: 01-19-2018.
S. Pillwein:
"Gestaltung von Freiform-Holztragwerken durch elastische Verformung";
Supervisor: J. Füssl, M. Lukacevic;
Institut für Mechanik der Werkstoffe und Strukturen,
2017;
final examination: 11-24-2017.
M. Autengruber:
"Modellierung und numerische Simulation des Feuchte- und Temperaturverhaltens von Holz-Aluminium-Verbundträgern";
Supervisor: M. Lukacevic, J. Füssl, J. Eberhardsteiner;
Institut für Mechanik der Werkstoffe und Strukturen,
2016;
final examination: 06-17-2016.
R. Lampert:
"Failure Modes of Wood Cells Identified by an Approach Based on the Extended Finite Element Method";
Supervisor: M. Lukacevic, J. Füssl, J. Eberhardsteiner;
Institut für Mechanik der Werkstoffe und Strukturen,
2014;
final examination: 2014.
M. Griessner:
"Bending Strength of Wooden Boards with Knots - Evaluation of Experiments Using Full-Field Deformation Measurements as a Basis for the Optimization of a 3D Numerical Simulation Tool";
Supervisor: M. Lukacevic, J. Füssl;
Institut für Mechanik der Werkstoffe und Strukturen,
2013;
final examination: 04-26-2013.
M. Lukacevic:
"Validation and Optimization of a Numerical Simulation Tool for Wood Grading";
Supervisor: C. Hackspiel, K. Hofstetter, J. Eberhardsteiner;
Institut für Mechanik der Werkstoffe und Strukturen,
2009;
final examination: 03-20-2009.