TU Home
This publication list has been generated automatically from the publication data of the Faculty of Mechanical and Industrial Engineering. Please invoke the page "Publications of the Faculty" directly for more complex searches and queries, or use the global search function of the Publication Database of the Vienna University of Technology!


Publication Database Home  

Publication list for members of
E307 - Institute of Engineering Design and Product Development
as authors or essentially involved persons

865 records (1989 - 2019)

The complete list of publications of the Faculty of Mechanical and Industrial Engineering is available from the publication database beginning with the publication year 2002. The database may but need not necessarily contain publications dated earlier than 2002.


Books and Book Editorships


  1. Authors: Stefan Biffl, E194-01; Arndt Lüder; Detlef Gerhard, E307-5

    S. Biffl, A. Lüder, D. Gerhard (ed.):
    "Multi-Disciplinary Engineering for Cyber-Physical Production Systems";
    Springer International Publishing, 2017, ISBN: 978-3-319-56344-2; 472 pages.

  2. Author: Bruno Grösel, E307-1

    B. Grösel (ed.):
    "200 Jahre Fachrichtung Maschinenbau - Chronik von 1815 bis 2015";
    Fakultät für Maschinenwesen und Betriebswissenschaften, Wien, 2015, ISBN: 978-3-200-04045-8; 98 pages.

  3. Author: Bruno Grösel, E307-1

    B. Grösel:
    "Bühnentechnik";
    R. Oldenbourg Verlag, Wien, 2007, ISBN: 978-3-7029-0555-2; 325 pages.

  4. Author: Bruno Grösel, E307-1

    B. Grösel:
    "Bühnentechnik";
    Walter de Gruyter GmbH, Berlin, 2015, ISBN: 978-3-11-035172-9; 398 pages.

  5. Author: Bruno Grösel, E307-1

    B. Grösel:
    "Bühnentechnik - Mechanische Einrichtungen";
    R. Oldenbourg Verlag, Wien, 2002, ISBN: 3-7029-0455-7; 286 pages.

    More information

  6. Authors: Klaus Hoffmann, E307-1; Erhard Krenn; Gerhard Stanker

    K. Hoffmann, E. Krenn, G. Stanker:
    "Fördertechnik 1";
    Oldenbourg, Wien, 2005, ISBN: 3-7029-0791-2; 240 pages.

  7. Authors: Klaus Hoffmann, E307-1; Erhard Krenn; Gerhard Stanker

    K. Hoffmann, E. Krenn, G. Stanker:
    "Fördertechnik 2";
    Oldenbourg, Wien, 2004, ISBN: 3-7029-0787-4; 320 pages.

  8. Authors: Christine Jasch, IÖW; Barbara Hammerl, Joanneum Research; Mark Hammer, SERI; Rainer Pamminger, E307-2; Ingrid Kaltenegger, Joanneum Research; Fritz Hinterberger, SERI

    C. Jasch, B. Hammerl, M. Hammer, R. Pamminger, I. Kaltenegger, F. Hinterberger:
    "Produkte und Dienstleistungen von morgen Nachhaltige Innovationen für Firmen und KonsumentInnen, Band 1, Ernährung. Wohnen. Mobilität. Energie";
    Books on Demand GmbH, Norderstedt, 2006, ISBN: 3-8334-5341-9; 523 pages.

    More information

  9. Authors: Christine Jasch, IÖW; Barbara Hammerl, Joanneum Research; Mark Hammer, SERI; Rainer Pamminger, E307-2; Ingrid Kaltenegger, Joanneum Research; Fritz Hinterberger, SERI

    C. Jasch, B. Hammerl, M. Hammer, R. Pamminger, I. Kaltenegger, F. Hinterberger:
    "Produkte und Dienstleistungen von morgen Nachhaltige Innovationen für Firmen und KonsumentInnen, Band 2: Chemie, Reinigung, Maschinen, Recycling";
    Books on Demand GmbH, Norderstedt, 2006, ISBN: 978-3-8334-6173-6; 477 pages.

    More information

  10. Author: Hesamedin Ostad Ahmad Ghorabi, E307-2

    H. Ostad Ahmad Ghorabi (ed.):
    "A New Approach in Design - Sustainable Product Development and Ecodesign (in Farsi language only - with CD-ROM )";
    Jahade Daneshgahi Publications, Teheran, 2008, ISBN: 978-964-2940-29-5; 192 pages.

  11. Author: Hesamedin Ostad Ahmad Ghorabi, E307-2

    H. Ostad Ahmad Ghorabi:
    "Parametric Ecodesign - Development of a Framework for the integration of Life Cycle Assessment into Computer Aided Design";
    SVH - Südwestdeutscher Verlag für Hochschulschriften, 2010, ISBN: 978-3-8381-1789-8; 199 pages.

    More information

  12. Authors: Hesamedin Ostad Ahmad Ghorabi, E307-2; Maria Huber, E307-2; Rainer Pamminger, E307-2
    Other persons involved: Anca Barsan; Lucian Barsan; Richard Morris; Maria Paralika; Wolfgang Wimmer, E307-2

    H. Ostad Ahmad Ghorabi, M. Huber, R. Pamminger:
    "Ecodesign for Sustainable Development - Volume 4 - Product Development (with CD ROM)";
    in series "Ecodesign for Sustainable Development", series editor: A. Barsan, L. Barsan, R. Morris, M. Paralika, W. Wimmer; issued by: Transilvania University of Brasov; Transilvania University of Brasov, Brasov, 2007, ISBN: 978-973-598-107-5, 186 pages.

  13. Author: Franz Rauscher, E307-6

    F. Rauscher:
    "Pressure Test and Acoustic Emission Examination";
    Shaker Verlag GmbH, Aachen, 2005, ISBN: 3-8322-4375-5; 195 pages.

    More information

  14. Authors: Wolfgang Wimmer, E307-2; Kun-Mo LEE; John Polak; Ferdinand Quella

    W. Wimmer, K.-M. LEE, J. Polak, F. Quella:
    "Ecodesign the competetive advantage";
    Springer-Verlag, Labuan, 2011, ISBN: 978-986-02-9527-6; 343 pages.

  15. Authors: Wolfgang Wimmer, E307-2; Kun-Mo LEE; Ferdinand Quella; John Polak

    W. Wimmer, K.-M. LEE, F. Quella, J. Polak:
    "ECODESIGN The Competetive Advantgage";
    Springer-Verlag, 2010, ISBN: 978-90-481-9126-0; 156 pages.

  16. Authors: Wolfgang Wimmer, E307-2; Rainer Züst

    W. Wimmer, R. Züst:
    "ECODESIGN Pilot, Product Investigation, Learning and Optimization Tool for Sustainable Product Development, with CD-ROM";
    Kluwer Academic Publishers, Dordrecht, The Netherlands, 2003, ISBN: 1-4020-1090-7.

  17. Authors: Wolfgang Wimmer, E307-2; Rainer Züst

    W. Wimmer, R. Züst (ed.):
    "ECODESIGN Pilot, Produkt-Innovations-,Lern- und Optimierungs-Tool für umweltgerechte Produktgestaltung mit deutsch/englischer CD-ROM";
    Verlag Industrielle Organisation, Zürich, 2001, ISBN: 3-85743-707-3.

  18. Authors: Wolfgang Wimmer, E307-2; Rainer Züst; Kun-Mo LEE

    W. Wimmer, R. Züst, K.-M. LEE:
    "Ecodesign Implementation";
    Springer-Verlag, Labuan, 2011, ISBN: 978-986-02-9268-8; 223 pages.

  19. Authors: Wolfgang Wimmer, E307-2; Rainer Züst; Kun-Mo LEE

    W. Wimmer, R. Züst, K.-M. LEE:
    "ECODESIGN Implementation - A Systematic Guidance on Integrating Environmental Considerations into Product Development";
    Springer-Verlag, 2004, ISBN: 1-4020-3070-3; 140 pages.

  20. Author: Josef Zeman, E307-6

    J. Zeman (ed.):
    "Tenth International Conference on Pressure Vessels Technology";
    Tagungsband, Österreichische Gesellschaft für Schweißtechnik, 2003, ISBN: 3-9501528-1-4; 673 pages.

    More information

  21. Authors: Josef Zeman, E307-6; Franz Rauscher, E307-6; Sebastian Schindler, E307-6

    J. Zeman, F. Rauscher, S. Schindler:
    "Pressure Vessel Design: The Direct Route";
    Elsevier, UK, 2006, ISBN: 0-08-044950-6; 320 pages.

    More information


Publications in Scientific Journals


  1. Authors: Michael Abramovici; Detlef Gerhard, E307-5

    M Abramovici, D. Gerhard:
    "Engineering Daten Management (EDM) - Anspruch, Wirklichkeit und Zukunftsperspektiven";
    Industriemanagement, 5 (1996).

  2. Authors: Michael Abramovici; Detlef Gerhard, E307-5; Lars Langenberg

    M Abramovici, D. Gerhard, L. Langenberg:
    "Werkzeuge, Methoden und Standards für die Unterstützung verteilter Entwicklungsprozesse durch EDM/PDM";
    Industriemanagement, 3 (1998), 20 - 23.

  3. Authors: Hanns Amri, E325-5; Roland Feil, TU München; Manfred Hajek, TU München; Michael Weigand, E307-3

    H. Amri, R. Feil, M. Hajek, M. Weigand:
    "Possibilities and difficulties for rotorcraft using variable transmission drive trains";
    CEAS Aeronautical Journal, 7 (2016), 2; 335 - 346.

    More information

  4. Author: Thomas Angeli, E307-3

    T. Angeli:
    "Entwicklung eines trainings-therapeutischen Ruderergometers für Paraplegiker zum Zwecke des Muskel- und Knochenaufbaus";
    Brüggemann & Morey-Klapsing, DVS Band 135 (2003), 30 - 35.

  5. Author: Thomas Angeli, E307-3

    T. Angeli:
    "Leistungssteigerung bei Fahrradantrieben";
    Biomedical Engineering, 41 (1996), 92 - 93.

  6. Authors: Thomas Angeli, E307-3; Thomas Bochdansky

    T. Angeli, T. Bochdansky:
    "Der Einfluss der Antagonisten auf die Bewegungsoptimierung am Beispiel des Radsprints.";
    Österreichische Zeitschrift für Physikalische Medizin und Rehabilitation, 7 (1997), 42 - 45.

  7. Authors: Thomas Angeli, E307-3; C. Bürger; H. Zehetgruber; A Giurea

    T. Angeli, C. Bürger, H. Zehetgruber, A. Giurea:
    "Intraoperative, retropatellare Druckmessungen vor, während und nach der Implantation einer Knietotalendoprothese";
    Brüggemann & Morey-Klapsing, DVS Band 135 (2003), 67 - 73.

  8. Authors: Thomas Angeli, E307-3; Margit Gföhler, E307-3; Thomas Eberharter, E307; Laurenz Rinder, E307-3

    T. Angeli, M. Gföhler, T. Eberharter, L. Rinder:
    "Tricycle for paraplegics using Functional Electrostimulation.";
    Medical & Biological Engineering & Computing, 37 (1999), 326 - 327.

  9. Authors: Thomas Angeli, E307-3; Roland Pawlik

    T. Angeli, R. Pawlik:
    "Der Einfluss der Sprunggelenksbewegung des Radrennfahrers auf sein Leistungsvermögen. Simulations- und Messergebnisse.";
    Österreichische Zeitschrift für Physikalische Medizin und Rehabilitation, 7 (1997), 131 - 134.

  10. Authors: Thomas Angeli, E307-3; S. Salzgeber

    T. Angeli, S. Salzgeber:
    "Therapeutisches Wintersportgerät für Cerebrag-Paretiker";
    Brüggemann & Morey-Klapsing, DVS Band 135 (2003), 24 - 29.

  11. Authors: Martin Apolin; Thomas Angeli, E307-3

    M. Apolin, T. Angeli:
    "Phänomene konzentrischer und exzentrischer Muskelarbeit physikalisch erklärt";
    Biomedical Engineering, 41 (1996), 94 - 95.

  12. Author: Mulu Bayray, E307-6

    M Bayray:
    "Investigation of Acoustic Emission Waveforms on a Pressure Vessel";
    Journal of Acoustic Emission, 19 (2001), 241 - 257.

    More information

  13. Authors: Mulu Bayray, E307-6; Franz Rauscher, E307-6

    M Bayray, F. Rauscher:
    "WAVELET TRANSFORM ANALYSIS OF EXPERIMENTAL AE WAVEFORMS ON STEEL PRESSURE VESSEL";
    Journal of Acoustic Emission, 24 (2006), 22 - 43.

    More information

  14. Authors: Simon Bettscheider; Carsten Gachot, E307-3; Andreas Rosenkranz

    S. Bettscheider, C. Gachot, A. Rosenkranz:
    "How to measure the real contact area? A simple marker and relocation foot-printing approach";
    Tribology International, 103 (2016), 167 - 175.

  15. Authors: Daniel Collado-Ruiz, TU Valencia; Hesamedin Ostad Ahmad Ghorabi, E307-2

    D. Collado-Ruiz, H. Ostad Ahmad Ghorabi:
    "Comparing LCA results out of competing products - Developing reference ranges from a product family approach";
    Journal of Cleaner Production, 18 (2010), 4; 355 - 364.

    More information

  16. Authors: Daniel Collado-Ruiz, TU Valencia; Hesamedin Ostad Ahmad Ghorabi, E307-2

    D. Collado-Ruiz, H. Ostad Ahmad Ghorabi:
    "Fuon theory: Standardizing Functional Units for Product Design";
    Resources, Conservation and Recycling, 54 (2010), 683 - 691.

    More information

  17. Authors: Daniel Collado-Ruiz, TU Valencia; Hesamedin Ostad Ahmad Ghorabi, E307-2

    D. Collado-Ruiz, H. Ostad Ahmad Ghorabi:
    "Influence of environmental information on creativity";
    Design Studies, 31 (2010), 5; 479 - 498.

    More information

  18. Authors: Klaus Decker, E307-1; Martin Egger, E307-1; Alexander Haber, E307-1; Christoph Pillichshammer

    K. Decker, M. Egger, A. Haber, C. Pillichshammer:
    "Drive Power of a Discharge Belt Conveyor - Comparison of Calculation, Simulation and Measurement";
    FME Transactions, Volum 44 (2016), 2; 272 - 277.

  19. Authors: Klaus Decker, E307-1; Bruno Grösel, E307-1

    K. Decker, B. Grösel:
    "Erforderlicher Technischer Durchsatz von Materialflusssystemen zur Erreichung eines Solldurchsatzes - ermittelt durch Simulation mit Iterationsalgorithmus";
    Logistics Journal, http://www.logistics-journal.de/archive/2008/5/1404/decker_de.pdf (2008).

  20. Authors: Gaele Ducher; Briony Hill; Thomas Angeli, E307-3; Shona Bass; Prisca Eser, Univ. of Melbourne

    G. Ducher, B.L. Hill, T. Angeli, S.L. Bass, P. Eser:
    "Comparison of pQCT parameters between ulna and radius in retired elite gymnasts: the skeletal benefits associated with long-term gymnastics are bone- and site-specific";
    Journal of Musculoskeletal & Neuronal Interactions, 9 (2009), 4; 247 - 255.

  21. Authors: Christian Dullinger, E325-5; Walter Struckl, E307-2; Martin Kozek, E325-5

    C. Dullinger, W. Struckl, M. Kozek:
    "A general approach for mixed-integer predictive control of HVAC systems using MILP";
    Applied Thermal Engineering, 128 (2018), 128; 1646 - 1659.

    More information

  22. Authors: Christian Dullinger, E325-5; Walter Struckl, E307-2; Martin Kozek, E325-5

    C. Dullinger, W. Struckl, M. Kozek:
    "A modular thermal simulation tool for computing energy consumption of HVAC units in rail vehicles";
    Applied Thermal Engineering, 78 (2015), 616 - 629.

    More information

  23. Authors: Christian Dullinger, E325-5; Walter Struckl, E307-2; Martin Kozek, E325-5

    C. Dullinger, W. Struckl, M. Kozek:
    "Holistic energy simulation and optimization tool for urban rail vehicles";
    Energy Conversion and Management, 174 (2018), 174; 101 - 111.

    More information

  24. Authors: Christian Dullinger, E325-5; Walter Struckl, E307-2; Martin Kozek, E325-5

    C. Dullinger, W. Struckl, M. Kozek:
    "Simulation-based multi-objective system optimization of train traction systems";
    Simulation Modelling Practice and Theory, 72 (2017), 72; 104 - 117.

    More information

  25. Author: Michael Eder, E307-1

    M. Eder:
    "An analytical approach for a performance calculation of shuttle-based storage and retrieval systems";
    Production & Manufacturing Research, Vol. 7 (2019), 1; 15 pages.

    More information

  26. Authors: Michael Eder, E307-1; Georg Kartnig, E307-1

    M. Eder, G. Kartnig:
    "Calculation Method of Determine the Throughput and the Energy Consumption of S/R Shuttle Systems";
    FME Transactions, 2018 (2018), 46; 4 pages.

  27. Authors: Michael Eder, E307-1; Georg Kartnig, E307-1

    M. Eder, G. Kartnig:
    "Durchsatzoptimierung von Shuttle-Systemene mithilfe eines analytischen Berechnungsmodells";
    Logistics Journal, 2016 (2016), 1 - 7.

    More information

  28. Authors: Michael Eder, E307-1; Georg Kartnig, E307-1

    M. Eder, G. Kartnig:
    "Throughput Analysis of S/R Shuttle Systems and Ideal Geometry for High Performance";
    FME Transactions, Volume 44 (2016), 2; 174 - 179.

  29. Authors: Stefan J. Eder, AC˛T research GmbH; Ulrike Cihak; Carsten Gachot, E307-3; Manel Rodriguez Ripoll

    S. J. Eder, U. Cihak, C. Gachot, M. Ripoll:
    "Interfacial Microstructure Evolution due to Strain Path Changes in Sliding Contacts";
    ACS Applied Materials & Interfaces, 10 (2018), 28; 24288 - 24301.

  30. Authors: Martin Egger, E307-1; Shi Dongyan; Klaus Hoffmann, E307-1

    M. Egger, S. Dongyan, K. Hoffmann:
    "Strain Gauges Applied to Conveyor Belts";
    bulk solids handling, Volume 22 (2002), 1; 42 - 45.

  31. Authors: Martin Egger, E307-1; Alexander Haber, E307-1; Klaus Decker, E307-1

    M. Egger, A. Haber, K. Decker:
    "Entwicklungswerkzeuge in der Schüttguttechnik - Klassische Analyse versus numerische Simulation";
    Schüttgut, 5/2016 Vol. 22 (2016), 5; 52 - 56.

  32. Authors: Martin Egger, E307-1; Alexander Haber, E307-1; Klaus Decker, E307-1

    M. Egger, A. Haber, K. Decker:
    "Entwicklungswerkzeuge in der Schüttguttechnik - Simulation im Praxistest";
    Schüttgut, 6/2016 Vol. 22 (2016), 6; 56 - 60.

  33. Authors: Martin Egger; Klaus Hoffmann, E307-1

    M. Egger, K. Hoffmann:
    "Bandführung beim Flachriemenbetrieb";
    ant Journal, 2 (2013), 10 - 13.

  34. Authors: Martin Egger, E307-1; Klaus Hoffmann, E307-1

    M. Egger, K. Hoffmann:
    "Tracking of Flat Belts";
    Journal of Mechanics Engineering and Automation, 2 (2012), 1; 27 - 36.

  35. Authors: Martin Egger; Anton Pirko; Klaus Hoffmann, E307-1

    M. Egger, A. Pirko, K. Hoffmann:
    "Simulation of Flat Belt Running";
    Steel Research International, Vol. 78 (2007), 4; 364 - 368.

  36. Authors: Martin Egger; Anton Pirko, E307-1; Klaus Hoffmann, E307-1; Christoph Haase

    M. Egger, A. Pirko, K. Hoffmann, C. Haase:
    "Simulationsmodell zur Bandlaufoptimierung";
    stahl und eisen, 125 (2005), 12/2005; 35 - 42.

  37. Authors: Martin Entacher; Gerhard Winter; Thomas Bumberger; Klaus Decker, E307-1; Istvan Godor; Robert Galler

    M. Entacher, G. Winter, T. Bumberger, K. Decker, I. Godor, R. Galler:
    "Cutter force measurement on tunnel boring machines - System design";
    Tunnelling And Underground Space Technology, 31 (2012), 97 - 106.

  38. Authors: Shiqi Fang; Luis Llanes; Stefan Klein; Dirk Bähre; Carsten Gachot, E307-3; Andreas Rosenkranz; Frank Mücklich

    S. Fang, L. Llanes, S. Klein, D. Bähre, C. Gachot, A. Rosenkranz, F. Mücklich:
    "Frictional Performance Assessment of Cemented Carbide Surfaces Textured by Laser";
    IOP Conference Series: Materials Science and Engineering, 258 (2017), 1; 012006.

  39. Author: Carsten Gachot, E307-3

    C. Gachot:
    "Wie neuartige Oberflächen tribologische Eigenschaften von Materialien beeinflussen können";
    Dialog Materialwissenschaft und Werkstofftechnik, 1 (2017), 128 - 132.

  40. Authors: Carsten Gachot, E307-3; Philipp Grützmacher, Universität Saarland; Andreas Rosenkranz

    C. Gachot, P. Grützmacher, A. Rosenkranz:
    "Laser Surface Texturing of TiAl Multilayer Films-Effects of Microstructure and Topography on Friction and Wear";
    Lubricants, 6 (2018), 2; 36.

  41. Authors: Carsten Gachot, E307-3; Andreas Rosenkranz; Stephen Hsu; Henara Lilian Costa

    C. Gachot, A. Rosenkranz, S. Hsu, H. Costa:
    "A critical assessment of surface texturing for friction and wear improvement";
    Wear, 372 (2017), 21 - 41.

  42. Authors: Wancheng GE; Anton Pirko, E307-1

    W. GE, A. Pirko:
    "Real-Time Position Control System for Test Stand Using Matlab/Simulink R 14";
    Journal of Tongji University, 34 (2006), 1; 126 - 128.

    More information

  43. Author: Detlef Gerhard, E307-5

    D. Gerhard:
    "Einrichtung eines Rechnerlabors für Virtuelle Produktentwicklung";
    ZIDline, Informationen des zentralen Informatikdienstes der TU Wien, 1 (2006), 15; 30 - 33.

    More information

  44. Authors: Detlef Gerhard, E307-5; Christoph Lutz, E307

    D. Gerhard, C. Lutz:
    "Rechnerunterstütztes Konfigurieren und Auslegen kundenindividueller Produkte";
    ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 3 (2011), 103 - 104.

    More information

  45. Authors: Detlef Gerhard, E307-5; Gert Reinauer, E307; Alexander Krumböck; Richard Ljuhar

    D. Gerhard, G. Reinauer, A. Krumböck, R. Ljuhar:
    "Information management in product development workflows - a novel approach on the basis of pseudonymization of product information";
    Procedia CIRP, 21 (2014), ISSN: 2212-8271; 467 - 472.

    More information

  46. Authors: Margit Gföhler, E307-3; Thomas Angeli, E307-3; Peter Lugner, E325-1

    M. Gföhler, T. Angeli, P. Lugner:
    "Modeling of Artificially Activated Muscle and Application to FES Cycling";
    Journal of Mechanics in Medicine and Biology, 4 (2004), 1 - 16.

  47. Authors: Margit Gföhler, E307-3; Peter Lugner, E325-1

    M. Gföhler, P. Lugner:
    "Dynamic simulation of FES-cycling: influence of individual parameters.";
    IEEE Transactions on Neural Systems and Rehabilitation Engineering TNSRE, 12 (2004), 398 - 405.

  48. Authors: Margit Gföhler, E307-3; Christian Peham

    M. Gföhler, C. Peham:
    "What can finite element analysis tell us?";
    Equine Veterinary Journal (invited), 45 (2013), 3; 265 - 266.

    More information

  49. Authors: Margit Gföhler, E307-3; Werner Reichenfelser, E307-3

    M. Gföhler, W. Reichenfelser et al.:
    "Functional and usability assessment of a robotic exoskeleton arm to support activities of daily life";
    Robotica, 32 (2014), 8; 1213 - 1224.

    More information

  50. Author: Manfred Grafinger, E307-5

    M. Grafinger:
    "Finite-Elemente-Berechnungsprogramm für Bowdenzüge: Beschreibung und Umsetzung.";
    Konstruktion, 9 (2001), 64 - 69.

    More information

  51. Author: Manfred Grafinger, E307-5

    M. Grafinger:
    "OneSpace Designer versus CATIA, Ein Softwarevergleich im Rahmen der CAD-Ausbildung im Maschinenbau.";
    ZIDline, Informationen des zentralen Informatikdienstes der TU Wien, 11 (2004), 35 - 38.

    More information

  52. Author: Manfred Grafinger, E307-5

    M. Grafinger:
    "Verformungen und Belastungen von Bowdenzughüllen: Einfluss verschiedener Einspannbedingungen auf Kräfte und Momente.";
    Konstruktion, 10 (2001), 67 - 71.

    More information

  53. Author: Bruno Grösel, E307-1

    B. Grösel:
    "Bühnentechnik - Eine Hightech Sparte";
    Bühnentechnische Rundschau, Sonderband (2007), 52 - 55.

  54. Author: Bruno Grösel, E307-1

    B. Grösel:
    "Der Einzug der industriellen Produktion";
    Bühnentechnische Rundschau, Sonderheft (2001), 31 - 34.

  55. Author: Bruno Grösel, E307-1

    B. Grösel:
    "Verfügbarkeit bei redundanten Förderanlagen und deren Einfluss auf den erforderlichen technischen Durchsatz";
    Schüttgut, 9 (2003), 6; 409 - 413.

  56. Authors: Martin Grösel, E307; Margit Gföhler, E307-3; Christian Peham

    M. Grösel, M. Gföhler, C. Peham:
    "Alternative solution of virtual biomodeling based on CT-scans.";
    Journal of Biomechanics, 42 (2009), 2006 - 2009.

    More information

  57. Authors: Martin Grösel, E307; Rr Zsoldos; Alexander Kotschwar; Margit Gföhler, E307-3; Christian Peham

    M. Grösel, Rr Zsoldos, A Kotschwar, M. Gföhler, C. Peham:
    "A preliminary model study of the equine back including activity of longissimus dorsi muscle";
    Equine Veterinary Journal, 42 (2010), 401 - 406.

    More information

  58. Authors: Philipp Grützmacher, Universität Saarland; Andreas Rosenkranz; Emre Atalay; Adam Szurdak; Carsten Gachot, E307-3; Gerhard Hirt; Frank Mücklich

    P. Grützmacher, A. Rosenkranz, E. Atalay, A. Szurdak, C. Gachot, G. Hirt, F. Mücklich:
    "Guiding lubricant on stainless steel surfaces by channel-like structures fabricated by roller-and micro-coining";
    Physica A: Statistical Mechanics and its Applications, 505 (2018), 1; 482 - 489.

  59. Authors: Philipp Grützmacher, Universität Saarland; Andreas Rosenkranz; Sebastian Rammacher; Carsten Gachot, E307-3; Frank Mücklich

    P. Grützmacher, A. Rosenkranz, S. Rammacher, C. Gachot, F. Mücklich:
    "The influence of centrifugal forces on friction and wear in rotational sliding";
    Tribology International, 116 (2017), 256 - 263.

  60. Authors: Philipp Grützmacher, Universität Saarland; Andreas Rosenkranz; Adam Szurdak; Carsten Gachot, E307-3; Gerhard Hirt; Frank Mücklich

    P. Grützmacher, A. Rosenkranz, A. Szurdak, C. Gachot, G. Hirt, F. Mücklich:
    "Effects of Multi‐Scale Patterning on the Run‐In Behavior of Steel-Alumina Pairings under Lubricated Conditions";
    Advanced Engineering Materials, 20 (2018), 1; 1700521 - 1700529.

  61. Authors: Philipp Grützmacher, Universität Saarland; Andreas Rosenkranz; Adam Szurdak; Carsten Gachot, E307-3; Gerhard Hirt; Frank Mücklich

    P. Grützmacher, A. Rosenkranz, A. Szurdak, C. Gachot, G. Hirt, F. Mücklich:
    "Lubricant migration on stainless steel induced by bio-inspired multi-scale surface patterns";
    Materials & Design, 150 (2018), 1; 55 - 63.

  62. Authors: Liang Guo; Carsten Gachot, E307-3; Patrick Wong

    L. Guo, C. Gachot, P. Wong:
    "Facilitating the Study of the Texturing Effect on Hydrodynamic Lubrication";
    Lubricants, 6 (2018), 1; 1 - 8.

  63. Authors: Alexander Haber, E307-1; Georg Kartnig, E307-1

    A. Haber, G. Kartnig:
    "Ansätze zur Berücksichtigung der zeit-und ortsabhängigen Eigenschaften von Festkörperbrücken in DEM-Simulation";
    Logistics Journal, 2018 (2018), 2018; 1 - 6.

  64. Authors: Alexander Haber, E307-1; Halilovic Seid; Martin Egger, E307-1

    A. Haber, H. Seid, M. Egger:
    "Filling and Emptying State of Silos Above Discharge Devices";
    FME Transactions, 2018 (2018), 46; 6 pages.

  65. Authors: Reinhard Hainisch, E307-3; Margit Gföhler, E307-3; Zubayer Karim, E307-3; Marcus Pandy

    R. Hainisch, M. Gföhler, Z. Karim, MG Pandy:
    "Method for determining musculotendon parameters in subject-specific musculoskeletal models of children developed from MRI data";
    Multibody System Dynamics, 1-2 (2012), 28; 143 - 156.

    More information

  66. Authors: Michael Harasek, E166-02-2; Bahram Haddadi, E166-02-2; Christian Jordan, E166-02-2; Margit Gföhler, E307-3; Christoph Janeczek, E307-3; Alen Karabegovic, E307-3; Livia Futter, E307; Claus-Georg Krenn, CCORE Techn. GmbH; Susanna Neudl, MedUni Wien; Robert Ullrich, CCORE Techn. GmbH

    M. Harasek, B. Haddadi, C. Jordan, M. Gföhler, C. Janeczek, A. Karabegovic, L. Futter, C. Krenn, S. Neudl, R. Ullrich:
    "Intracorporeal Membrane Catheter for CO2 Reduction in a Blood-Membrane Contactor";
    International Journal of Artificial Organs, 40 (2017), 8; 414.

  67. Authors: Georg Havlicek, E307-1; Georg Kartnig, E307-1

    G. Havlicek, G. Kartnig:
    "Ermittlung des Längsschlupfes eines angetriebenen Kranrades bei bombieten Schienenkopf";
    Logistics Journal, 2017 (2017), 1 - 10.

    More information

  68. Authors: Georg Havlicek, E307-1; Georg Kartnig, E307-1; Georg Klapper, Künz GmbH

    G. Havlicek, G. Kartnig, G. Klapper:
    "Kombination von Eigenspannungen und betrieblichen Spannungen in einem Kranlaufrad";
    Logistics Journal, 2018 (2018), 2018; 1 - 10.

  69. Authors: Martin Hennig, E307-5; Gerhard Reisinger, E330-02 [FHA, GB PL]; Thomas Trautner, E311-01-3; Philipp Hold, E330-02 [FhA, GB PL]; Detlef Gerhard, E307-5; Alexandra Mazak, E194-03

    M. Hennig, G. Reisinger, T. Trautner, P. Hold, D. Gerhard, A. Mazak:
    "TU Wien Pilot Factory Industry 4.0";
    Procedia Manufacturing, 31 (2019), 200 - 205.

    More information

  70. Author: Klaus Hoffmann, E307-1

    K. Hoffmann:
    "Oscillation Effects of Ropeways Caused by Cross-Wind and Other Influences";
    FME Transactions, Volume 37 (2009), No. 4; 175 - 184.

  71. Author: Klaus Hoffmann, E307-1

    K. Hoffmann:
    "Recent Developments in Cable-Drawn Urban Transport Systems";
    FME Transactions, Volume 34 (2006), 4; 205 - 212.

  72. Authors: Klaus Hoffmann, E307-1; Martin Egger, E307-1; Gabriel Isac

    K. Hoffmann, M. Egger, G. Isac:
    "Influence of the Measuring Sheet on the Accuracy of Pressure Measurements";
    Acta Technica Napocensis, Machines Constructions Materials (2003), 46; 31 - 34.

  73. Authors: Klaus Hoffmann, E307-1; Thomas Gabmayer, E307-1; G. Huber

    K. Hoffmann, T. Gabmayer, G. Huber:
    "Measurement of oscillation effects on ropeways and chairlifts";
    ÖIAZ, 153 (2008), 10-12/2008; 435 - 438.

  74. Authors: Klaus Hoffmann, E307-1; Robert Liehl

    K. Hoffmann, R. Liehl:
    "Querschwingungen von ZUB-Fahrzeugen";
    Internationale Seilbahn-Rundschau, 8 (2004), 14 - 16.

  75. Authors: Klaus Hoffmann, E307-1; Radostina Petrova

    K. Hoffmann, R. Petrova:
    "Simulation of Vortex Excited Vibrations of a Bicable Ropeway";
    Engineering Review, Vol.29 (2009), 1; 11 - 23.

  76. Authors: Klaus Hoffmann, E307-1; Christoph Pillichshammer

    K. Hoffmann, C. Pillichshammer:
    "Discharge Screw Coveyors - Driving Power aund Design Optimisation";
    bulk solids handling, Vol. 30 (2010), 1; 24 - 28.

  77. Authors: Klaus Hoffmann, E307-1; Christoph Pillichshammer

    K. Hoffmann, C. Pillichshammer:
    "Schnecken auf dem Prüfstand";
    Process, 17 (2010), 3; 22 - 25.

  78. Authors: Klaus Hoffmann, E307-1; Christoph Pillichshammer

    K. Hoffmann, C. Pillichshammer:
    "Schnecken auf dem Prüfstand";
    Schüttgut, Vol. 16 (2010), 3; 154 - 156.

  79. Authors: Chia Jui Hsu, E307-3; Andreas Stratmann; Andreas Rosenkranz; Carsten Gachot, E307-3

    C. Hsu, A. Stratmann, A. Rosenkranz, C. Gachot:
    "Enhanced Growth of ZDDP-Based Tribofilms on Laser-Interference Patterned Cylinder Roller Bearings";
    Lubricants, 5 (2017), 4; 39.

  80. Authors: Maria Huber, E307-2; Wolfgang Wimmer, E307-2

    M. Huber, W. Wimmer:
    "Ecodesign - Nachhaltige Produktgestaltung";
    zuschnitt - Zeitschrift über Holz als Werkstoff und Werke in Holz, vorläufig nachhaltig (2006), 24; 26 - 27.

    More information

  81. Authors: Christoph Janeczek, E307-3; Benjamin Lukitsch, E166-02-2; Florentine Huber-Dangl, E307-3; Alen Karabegovic, E307-3; Christian Jordan, E166-02-2; Bahram Haddadi, E166-02-2; Roman Ullrich; Claus G. Krenn; Margit Gföhler, E307-3; Michael Harasek, E166-02-2

    C. Janeczek, B. Lukitsch, F. Huber-Dangl, A. Karabegovic, C. Jordan, B. Haddadi, R. Ullrich, C. Krenn, M. Gföhler, M. Harasek:
    "Basic Performance Tests of the MILL Intravascular CO2 Removal Catheter";
    Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 40 (2018), 1506 - 1509.

    More information

  82. Authors: Alen Karabegovic, E307-3; Markus Hinteregger, E307-3; Christoph Janeczek, E307-3; Werner Mohl, MedUni Wien; Margit Gföhler, E307-3

    A. Karabegovic, M. Hinteregger, C. Janeczek, W. Mohl, M. Gföhler:
    "Closed-loop helium circulation system for actuation of a continuously operating heart catheter pump";
    International Journal of Artificial Organs, 40 (2017), 6; 272 - 281.

  83. Author: Georg Kartnig, E307-1

    G. Kartnig:
    "Structure and Methods in the Field of Technical Logistics";
    FME Transactions, Volume 37 (2009), No. 4; 193 - 202.

  84. Authors: Georg Kartnig, E307-1; Bruno Grösel, E307-1; Nenad Zrnic

    G. Kartnig, B. Grösel, N. Zrnic:
    "Past, State-of-the-Art and Future of Intralogistics in Relation to Megatrends";
    FME Transactions, 40 (2012), 4; 193 - 200.

  85. Authors: Haytam Kasem; Ori Stav; Philipp Grützmacher, Universität Saarland; Carsten Gachot, E307-3

    H. Kasem, O. Stav, P. Grützmacher, C. Gachot:
    "Effect of Low Depth Surface Texturing on Friction Reduction in Lubricated Sliding Contact";
    Lubricants, 6 (2018), 3; 62.

  86. Author: Peter Kral, E307-3

    P. Kral:
    "Das Leben einer Rolltreppe";
    MFS-News - Fachzeitschrift für Maintenance und Facility Management, 3 (2008), 9.

  87. Authors: Peter Kral, E307-3; Stefan Pausch

    P. Kral, S. Pausch:
    "Comparison of Empirical Methods and Measurements for the Determination of Wear of Worm Gears";
    Tribotest Journal, 10 (2003), 163 - 175.

  88. Authors: Martin Kuchler, E307-3; Margit Gföhler, E307-3

    M. Kuchler, M. Gföhler:
    "Mechanical modeling and simulation of the human movement on a rowing ergometer.";
    Simulation News Europe, 40 (2004), ISSN 0929-2268; 10 - 19.

  89. Authors: Andrés Lasagni; Carsten Gachot, E307-3; Kim Trinh; Michael Hans; Andreas Rosenkranz; Teja Roch; Sebastian Eckhard; Tim Kunze; Matthias Bieda; Denise Günther; Valentin Lang; Frank Mücklich

    A. Lasagni, C. Gachot, K. Trinh, M. Hans, A. Rosenkranz, T. Roch, S. Eckhard, T. Kunze, M. Bieda, D. Günther, V. Lang, F. Mücklich:
    "Direct laser interference patterning, 20 years of development: From the basics to industrial applications";
    Proceeding of SPIE, 10092 (2017), 1009211 - 1009215.

  90. Authors: Anssi Laukkanen; Kenneth Holmberg; Helena Ronkainen; Gwidon Stachowiak; Pawel Podsiadlo; Marcin Wolski; Carsten Gachot, E307-3; Lawrence Li; Mark Gee

    A. Laukkanen, K. Holmberg, H. Ronkainen, G. Stachowiak, P. Podsiadlo, M. Wolski, C. Gachot, L. Li, M. Gee:
    "Topographical orientation effects on surface stresses influencing on wear in sliding DLC contacts, Part 2: Modelling and simulations";
    accepted for publication in Wear 1 (2017).

  91. Authors: Yc Lin; Margit Gföhler, E307-3; Marcus Pandy

    Y. Lin, M. Gföhler, MG Pandy:
    ". Quantitative evaluation of the major determinants of human gait.";
    Journal of Biomechanics, 47 (2014), 6; 1324 - 1331.

    More information

  92. Authors: Mathias Linz; Manel Rodriguez Ripoll; Carsten Gachot, E307-3; Christoph Pauly; Friedrich Franek, E307-3; Frank Mücklich

    M. Linz, M. Ripoll, C. Gachot, C. Pauly, F. Franek, F. Mücklich:
    "On the competition between plastic deformation and material detachment in ferritic/pearlitic steel under boundary lubrication";
    Wear, 376 (2017), 813 - 821.

  93. Authors: Mathias Linz, AC2T; Manel Rodriguez Ripoll, AC2T; Christoph Pauly, Uni Saarbrücken; Johannes Bernardi, E057B; Andreas Steiger-Thirsfeld, E057B; Friedrich Franek, E307-3; Frank Mücklich, Univ. Saarland; Carsten Gachot, E307-3

    M. Linz, M. Ripoll, C. Pauly, J. Bernardi, A. Steiger-Thirsfeld, F. Franek, F Mücklich, C. Gachot:
    "Heterogeneous Strain Distribution and Saturation of Geometrically Necessary Dislocations in a Ferritic-Pearlitic Steel during Lubricated Sliding";
    Advanced Engineering Materials, 20 (2018), 4; 1 - 11.

    More information

  94. Authors: Werner Mohl, MedUni Wien; Margit Gföhler, E307-3; Christoph Janeczek, E307-3; Alen Karabegovic, E307-3; Reinhard Willinger, E302-02

    W. Mohl, M. Gföhler, C. Janeczek, A. Karabegovic, R. Willinger:
    "Intraventricular flow accelerator LVFA";
    EACTS Daily News, 1 (2014), 18 - 19.

  95. Author: Hesamedin Ostad Ahmad Ghorabi, E307-2

    H. Ostad Ahmad Ghorabi:
    "Ecodesign - A New Dimension in Product Development";
    Mechanical Engineering, Vol. 13 (2005), No. 39; 17 - 20.

  96. Author: Hesamedin Ostad Ahmad Ghorabi, E307-2

    H. Ostad Ahmad Ghorabi:
    "EcoDesign ABCs - How to Develop a Sustainable Product Design";
    Production & Operations Monthly (POM) (invited), 2 (2007), 1.

  97. Author: Hesamedin Ostad Ahmad Ghorabi, E307-2

    H. Ostad Ahmad Ghorabi:
    "Ecodesign als Schlüssel zur Nachhaltigkeit";
    Studio!Sus - Der Studienführer zum Thema Nachhaltigkeit (invited), November (2008), 11; 3 pages.

  98. Author: Hesamedin Ostad Ahmad Ghorabi, E307-2

    H. Ostad Ahmad Ghorabi:
    "Introduction of Life Cycle Assessment and Ecodesign for Product Improvement";
    Mechanical Engineering, Vol. 15 (2006), 48; 50 - 53.

  99. Authors: Hesamedin Ostad Ahmad Ghorabi, E307-2; Daniel Collado-Ruiz, TU Valencia

    H. Ostad Ahmad Ghorabi, D. Collado-Ruiz:
    "Tool for the Environmental Assessment of Cranes Based on Parameterization";
    International Journal Of Life Cycle Assessment, 16 (2011), 5; 392 - 400.

    More information

  100. Authors: Hesamedin Ostad Ahmad Ghorabi, E307-2; Jutta Jerlich, E061

    H. Ostad Ahmad Ghorabi, Jutta Jerlich:
    "Ecodesign - mehr als nur Technik - Ökointelligente Produkte im Vormarsch";
    Soziale Technik, 4 (2007), 6 - 9.

    More information

  101. Authors: Hesamedin Ostad Ahmad Ghorabi, E307-2; Wolfgang Wimmer, E307-2

    H. Ostad Ahmad Ghorabi, W. Wimmer:
    "Best Practice Beispiele für Ecodesign in Österreich";
    Energy - Zeitschrift der österreichischen Energieagentur (invited), Dezember (2009), 1; 3 pages.

  102. Authors: Hesamedin Ostad Ahmad Ghorabi, E307-2; Wolfgang Wimmer, E307-2

    H. Ostad Ahmad Ghorabi, W. Wimmer:
    "Tools and Approaches for Innovation Through Ecodesign - Sustainable Product Development";
    Journal of Mechanical Engineering Design (invited), 8 (2005), 2; 6 - 13.

  103. Authors: Rainer Pamminger, E307-2; Wolfgang Wimmer, E307-2; Hesamedin Ostad Ahmad Ghorabi, E307-2

    R. Pamminger, W. Wimmer, H. Ostad Ahmad Ghorabi:
    "Ecodesign leicht gemacht - In sechs Schritten zum umweltgerechten Produkt";
    Elektronik ecodesign - Fachmagazin für Grüne Elektronik (invited), September (2006), 40 - 44.

  104. Authors: Christof Partl; Georg Kartnig, E307-1; Bruno Grösel, E307-1

    C. Partl, G. Kartnig, B. Grösel:
    "Stoppkategorie 0 - den Not-Halt simulieren";
    Bühnentechnische Rundschau, Sonderband 2016 (2016), 4716; 80 - 83.

  105. Authors: Christof Partl; Georg Kartnig, E307-1; F Oberlehner; E Papst; Bruno Grösel, E307-1

    C. Partl, G. Kartnig, F. Oberlehner, E. Papst, B. Grösel:
    "Untersuchungen der Lasten an Bühnenwinden bei Not-Halt";
    Prospect, 2 (2016), 2; 29 - 31.

  106. Authors: Pierre Paschinger, E307-3; Michael Weigand, E307-3

    P. Paschinger, M. Weigand:
    "Study on possible solutions of a Compound-Split transmission system for the UH-60 helicopter";
    Mechanism and Machine Theory, 129 (2018), 17 - 35.

    More information

  107. Authors: Franz Paulischin, E307-1; Georg Kartnig, E307-1

    F. Paulischin, G. Kartnig:
    "Das laterale Laufverhalten von Stahlprozesssbändern - Erweiterung der Betrachtungen auf Bänder mit geringe Bandspannung";
    Logistics Journal, 2018 (2018), 2018; 1 - 10.

  108. Authors: Alessandra Pedrocchi; Margit Gföhler, E307-3; Werner Reichenfelser, E307-3; Jakob Karner, E307-3

    A. Pedrocchi, M. Gföhler, W. Reichenfelser, J Karner et al.:
    "MUNDUS project: MUltimodal Neuroprosthesis for daily Upper limb Support";
    Journal of NeuroEngineering and Rehabilitation, 10 (2013), 1; 1 - 20.

    More information

  109. Authors: Radostina Petrova; Klaus Hoffmann, E307-1; Robert Liehl

    R. Petrova, K. Hoffmann, R. Liehl:
    "Modelling and simulation of bicable ropeways under cross-wind influence";
    Mathematical and Computer Modelling of Dynamical Systems, Vol. 13 (2007), 1; 63 - 81.

  110. Author: Anton Pirko, E307-1

    A. Pirko:
    "Experience with a Real-time Control System for a Test Stand using a MATLAB/Simulink R14 Toolbox xPC Target";
    Simulation News Europe, 41/42 (2004), 26 - 27.

  111. Authors: Daniel Pohselt, DiePresse; Margit Gföhler, E307-3; Markus Puchinger, E307-3

    D. Pohselt, M. Gföhler, M. Puchinger:
    "Ein Stützarm aus dem 3-D-Drucker";
    Die Presse, 14/07 (2018).

    More information

  112. Authors: Walter Raab; Michael Weigand, E307-3; Armin Renneisen; Volker Günther

    W. Raab, M. Weigand, A. Renneisen, V. Günther:
    "Beanspruchungen in Paßfederverbindungen. Teil I: Paßfederverbindungen unter Torsionsbelastung";
    Antriebstechnik, 31 (1992), 6; 69 - 73.

  113. Authors: Walter Raab; Michael Weigand, E307-3; Armin Renneisen; Volker Günther

    W. Raab, M. Weigand, A. Renneisen, V. Günther:
    "Beanspruchungen in Paßfederverbindungen. Teil II: Paßfederverbindungen unter Biegebelastung";
    Antriebstechnik, 31 (1992), 7; 55 - 59.

  114. Authors: Walter Raab; Michael Weigand, E307-3; Armin Renneisen; Stefan Hörl

    W. Raab, M. Weigand, A. Renneisen, S. Hörl:
    "Modeling Technique To Simulate Thermally-Induced Stress In An Assembly Consisting Of Components Of Different Materials";
    Experimental Techniques, May/June (1991).

  115. Authors: John Rasmussen; Soren Christensen; Margit Gföhler, E307-3; Michael Damsgaard; Thomas Angeli, E307-3

    J Rasmussen, ST Christensen, M. Gföhler, M Damsgaard, T. Angeli:
    "Design optimization of a pedaling mechanism for paraplegics.";
    Structural and Multidisciplinary Optimization, 26 (2004), 132 - 138.

  116. Author: Franz Rauscher, E307-6

    F. Rauscher:
    "Acoustic Emission Event Identification With Similar Transfer Functions";
    Journal of Acoustic Emission, Vol. 28 (2010), 28; 155 - 162.

    More information

  117. Author: Franz Rauscher, E307-6

    F. Rauscher:
    "DEFECT DETECTION BY ACOUSTIC EMISSION EXAMINATION OF METALLIC PRESSURE VESSELS";
    Journal of Acoustic Emission, 22 (2004), 49 - 58.

    More information

  118. Author: Franz Rauscher, E307-6

    F. Rauscher:
    "Design by Analysis: Direct Route for Cases With Pressure and Thermal Action";
    Journal of Pressure Vessel Technology, Volume 130, Issue 1 (2008), 011201; 011201-1 - 011201-9.

    More information

  119. Author: Franz Rauscher, E307-6

    F. Rauscher:
    "Fatigue of non-welded pressure vessels made of high strength steel";
    International Journal of Pressure Vessels and Piping, 80 (2003), 3; 197 - 204.

    More information

  120. Author: Franz Rauscher, E307-6

    F. Rauscher:
    "Identifying Acoustic Emission Events with Similar Transfer Functions";
    e-Journal of NDT, 2010 (2010), 8 pages.

    More information

  121. Author: Franz Rauscher, E307-6

    F. Rauscher:
    "Using X22-Correlation for Subclustering and Relative Location of Acoustic Amission Signals";
    e-Journal of NDT, 2012 (2012), 14 pages.

    More information

  122. Author: Franz Rauscher, E307-6

    F. Rauscher:
    "Zyklische Ermüdung von Behältern mit eingeschraubten ebenen Böden oder Deckeln";
    Technische Überwachung (TÜ), Springer VDI - Verlag, 42 (2001), 9; 11 - 14.

    More information

  123. Author: Franz Rauscher, E307-6

    F. Rauscher:
    "Zyklische Ermüdung von Gasflaschen";
    Technische Überwachung (TÜ), Springer VDI - Verlag, 42 (2001), 27 - 30.

    More information

  124. Authors: Franz Rauscher, E307-6; Mulu Bayray, E307-6

    F. Rauscher, M Bayray:
    "Acoustic Emission Measurements on Shell Structures with Directly Attached Piezo-Ceramic";
    Journal of Acoustic Emission, 20 (2002), 188 - 193.

    More information

  125. Authors: Franz Rauscher, E307-6; Florian Neugebauer, E307-04

    F. Rauscher, F. Neugebauer:
    "Creep design according to EN13445-3 Annex B";
    International Journal of Pressure Vessels and Piping, 2019 (2019), 172; 272 - 282.

    More information

  126. Authors: Christian Redl; Margit Gföhler, E307-3; Marcus Pandy

    Ch. Redl, M. Gföhler, MG Pandy:
    "SENSITIVITY OF MUSCLE FORCE ESTIMATES TO VARIATIONS IN MUSCLE-TENDON PROPERTIES";
    Human Movement Science, 26 (2007), 2; 306 - 319.

  127. Authors: Werner Reichenfelser, E307-3; Margit Gföhler, E307-3; Thomas Angeli, E307-3

    W. Reichenfelser, M. Gföhler, T. Angeli:
    "Design of a test and training tricycle fpr subjects with paraplegia";
    Technology and Disability, 17 (2005), 2; 93 - 101.

  128. Authors: Werner Reichenfelser, E307-3; Harald Hackl, E307-3; Josef Hufgard, AUVA; Josef Kastner, FIOT; Karin Gstaltner, AUVA; Margit Gföhler, E307-3

    W. Reichenfelser, H. Hackl, J. Hufgard, J. Kastner, K. Gstaltner, M. Gföhler:
    "Monitoring Of Spasticity And Functional Ability In Individuals With Incomplete Spinal Injury With A Functional Electrical Stimulation Cycling System";
    Journal Of Rehabilitation Medicine, Vol. 44. No. 5 (2012), 444 - 449.

  129. Authors: Werner Reichenfelser, E307-3; Jakob Karner, E307-3; Margit Gföhler, E307-3

    W. Reichenfelser, J Karner, M. Gföhler et al.:
    "Feedback control of arm movements using Neuro-Muscular Electrical Stimulation (NMES) combined with a lockable, passive exoskeleton for gravity compensation.";
    Frontiers in Neuroscience, 8 (2014), 1 - 16.

    More information

  130. Authors: Leander Reinert; Federico Lasserre; Carsten Gachot, E307-3; Philipp Grützmacher, Universität Saarland; Timothy MacLucas; Nicolas Souza; Frank Mücklich; Sebastián Suarez

    L. Reinert, F. Lasserre, C. Gachot, P. Grützmacher, T. MacLucas, N. Souza, F. Mücklich, S. Suarez:
    "Long-lasting solid lubrication by CNT-coated patterned surfaces";
    Scientific Reports, 7 (2017), 1 - 10.

  131. Author: Laurenz Rinder, E307-3

    L. Rinder:
    "Entwicklung, Beurteilung und Optimierung von Rotorprofilen mit der Profilsteigungsfunktion";
    VDI-Berichte, Schraubenmaschinen 2002, VDI-Bericht (2002), VDI-Bericht.

    More information

  132. Authors: Laurenz Rinder, E307-3; Manfred Grafinger, E307-5

    L. Rinder, M. Grafinger:
    "Die einheitliche analytische Darstellung allgemeiner Rotorverzahnungen für Schraubenmaschinen";
    KI Luft- und Kältetechnik, 10 (2002), 10.

    More information

  133. Authors: Laurenz Rinder, E307-3; Manfred Grafinger, E307-5

    L. Rinder, M. Grafinger:
    "Lagerung von Schraubenverdichterrotoren mit nur einem einseitigen Kegelrollenlager auf der Druckseite";
    Schraubenmaschinen, 9 (2001), 87 - 92.

    More information

  134. Authors: Laurenz Rinder, E307-3; Manfred Grafinger, E307-5

    L. Rinder, M. Grafinger:
    "Verzahnungsgeometrie und möglicher Vorzeichenwechsel beim Drehmoment und Achsschub am Nebenrotor von Schraubenkompressoren";
    Schraubenmaschinen, 7 (1999), 49 - 60.

    More information

  135. Authors: Laurenz Rinder, E307-3; Harald Hackl, E307-3

    L. Rinder, H. Hackl:
    "Entwicklung eines Startluftkompressors mit einer einstufigen Hochdruckschraube und vergleichende Bewertung mit einem Kolbenkompressor gleicher Leistung";
    Schraubenmaschinen, 14 (2011), 1; 5 - 17.

  136. Authors: Laurenz Rinder, E307-3; Martin Kuchler, E307-3; Harald Hackl, E307-3

    L. Rinder, M. Kuchler, H. Hackl:
    "Wassereinspritzung oder Öleinspritzung für Schraubenkompressoren im Vergleich - Water-Injection and Oil-Injection for Screw-Compressors in Comparison";
    Schraubenmaschinen, 12 (2004), ISSN 0945-1870; 65 - 74.

    More information

  137. Authors: Laurenz Rinder, E307-3; Jaromir Svigler; Bernhard Schlor; M Pasek

    L. Rinder, J. Svigler, B. Schlor, M. Pasek:
    "Analyse der Lärmabstrahlung einer dünnen Platte";
    Konstruktion, 6 (2002), 6; 75 - 79.

    More information

  138. Authors: Manel Ripoll Rodríguez; Mathias Linz; Carsten Gachot, E307-3

    M. Ripoll Rodríguez, M. Linz, C. Gachot:
    "Transient softening in lubricated sliding contacts due to strain path changes";
    Wear, 376 (2017), 1728 - 1738.

  139. Authors: Andreas Rosenkranz; Saad Ahmed Khan; Adam Szurdak; Gerhard Hirt; Carsten Gachot, E307-3

    A. Rosenkranz, S. Khan, A. Szurdak, G. Hirt, C. Gachot:
    "Wear behavior of micro-coined steel surfaces under mixed lubrication";
    accepted for publication in Industrial Lubrication and Tribology 1 (2017), 1 - 10.

  140. Authors: Andreas Rosenkranz; Joris Pangraz; Carsten Gachot, E307-3; Frank Mücklich

    A. Rosenkranz, J. Pangraz, C. Gachot, F. Mücklich:
    "Load-dependent run-in and wear behaviour of line-like surface patterns produced by direct laser interference patterning";
    Wear, 368 (2016), 350 - 357.

  141. Authors: Sebastian Schindler, E307-6; Josef Zeman, E307-6

    S. Schindler, J. Zeman:
    "Das Problem der Aufdachung im Druckgerätebau";
    Schweiss-&Prüftechnik, 03 (2005), 38 - 39.

    More information

  142. Authors: Sebastian Schindler, E307-6; Josef Zeman, E307-6

    S. Schindler, J. Zeman:
    "Stress concentration factors of nozzle-sphere connections";
    International Journal of Pressure Vessels and Piping, 80 (2003), 2; 87 - 95.

    More information

  143. Authors: Andreas Stratmann; Georg Jacobs; Chia Jui Hsu, E307-3; Carsten Gachot, E307-3; Gero Burghardt

    A. Stratmann, G. Jacobs, C. Hsu, C. Gachot, G. Burghardt:
    "Antiwear tribofilm growth in rolling bearings under boundary lubrication conditions";
    Tribology International, 113 (2017), 43 - 49.

  144. Authors: Walter Struckl, E307-2; Anton Stribersky; Walter Gunselmann; Günter Kristen

    W. Struckl, A. Stribersky, W. Gunselmann, G. Kristen:
    "Energieeffizienz für Metro-Fahrzeuge";
    Eisenbahntechnische Rundschau, 9 (2006), 646 - 652.

  145. Authors: Hosein Tafaghodi, E307-5; Manfred Grafinger, E307-5

    H. Tafaghodi, M. Grafinger:
    "The precision of FEM simulation results compared with theoretical composite layup calculation";
    Composites - Part B: Engineering, 95 (2016), 282 - 292.

    More information

  146. Authors: Roman Talla, E307-3; Mary Galea, Univ. of Melbourne; Noel Lythgo, Univ. of Melbourne; Thomas Angeli, E307-3; Prisca Eser, Univ. of Melbourne

    R Talla, M. Galea, L. Lythgo, T. Angeli, P. Eser:
    "Contralateral comparison of bone geometry, BMD and muscle function in the lower leg and forearm after stroke";
    Journal of Musculoskeletal & Neuronal Interactions, 4 (2011), 306 - 313.

    More information

  147. Authors: Florian Thürk, E354-03; Martin Elenkov, E307-3; Andreas Waldmann; Stefan Böhme; C Braun; Andy Adler; Eugenijus Kaniusas, E354-03

    F. Thürk, M. Elenkov, A. Waldmann, S. Böhme, C. Braun, A. Adler, E. Kaniusas:
    "Influence of reconstruction settings in electrical impedance tomography on figures of merit and physiological parameters";
    Physiological Measurement, 2019 May 24 (2019), 1 - 27.

  148. Authors: Hector Torres; Sebastian Slawik; Carsten Gachot, E307-3; Braham Prakash; Manel Rodriguez Ripoll

    H. Torres, S. Slawik, C. Gachot, B. Prakash, M. Ripoll:
    "Microstructural design of self-lubricating laser claddings for use in high temperature sliding applications";
    Surface & Coatings Technology, 337 (2018), 1; 24 - 34.

  149. Authors: Hector Torres; Todor Vuchkov; Sebastian Slawik; Carsten Gachot, E307-3; Braham Prakash; Manel Rodriguez Ripoll

    H. Torres, T. Vuchkov, S. Slawik, C. Gachot, B. Prakash, M. Ripoll:
    "Self-lubricating laser claddings for reducing friction and wear from room temperature to 600° C";
    Wear, 408-409 (2018), 1; 22 - 33.

  150. Authors: Arthur van Soest; Margit Gföhler, E307-3; Richard Casius

    AJK van Soest, M. Gföhler, R Casius:
    "Consequences of ankle joint fixation on FES cycling power output; a simulation study.";
    Medicine & Science in Sports & Exercise, 01/2005 (2005), 797 - 806.

  151. Author: Michael Weigand, E307-3

    M. Weigand:
    "Moderne Hubschraubergetriebe";
    Wehrtechnischer Report "Luftbeweglichkeit des Heeres", (2005), Januar.

  152. Authors: Michael Weigand, E307-3; Klaus Ehrlenspiel

    M. Weigand, K. Ehrlenspiel:
    "Progettare Riduttori Minimizzando I Costi";
    Organi di Trasmissione, (1997), 1 - Gennaio; 52 - 59.

  153. Author: Wolfgang Wimmer, E307-2

    W. Wimmer:
    "Wettbewerbsvorteile durch ökologische Produkte";
    Ökologisches Wirtschaften, 1 (2007), 39 - 42.

  154. Authors: Wolfgang Wimmer, E307-2; Hesamedin Ostad Ahmad Ghorabi, E307-2; Rainer Pamminger, E307-2; Maria Huber, E307-2

    W. Wimmer, H. Ostad Ahmad Ghorabi, R. Pamminger, M. Huber:
    "Product innovation through ecodesign";
    International Journal of Sustainable Design (invited), 1 (2008), 1; 75 - 92.

  155. Authors: Marcin Wolski; Pawel Podsiadlo; Gwidon Stachowiak; Kenneth Holmberg; Anssi Laukkanen; Helena Ronkainen; Mark Gee; John Nunn; Carsten Gachot, E307-3; Lawrence Li

    M. Wolski, P. Podsiadlo, G. Stachowiak, K. Holmberg, A. Laukkanen, H. Ronkainen, M. Gee, J. Nunn, C. Gachot, L. Li:
    "Multiscale characterisation of 3D surface topography of DLC coated and uncoated surfaces by directional blanket covering (DBC) method";
    accepted for publication in Wear 1 (2017).

  156. Author: Josef Zeman, E307-6

    J. Zeman:
    "A note on stresses in fatigue design checks of welded structures";
    International Journal of Pressure Vessels and Piping, 81 (2004), 83 - 85.

    More information

  157. Author: Josef Zeman, E307-6

    J. Zeman:
    "Anmerkungen zum Prüfdruck";
    TÜV TIMES, 2004 (2004), 04; 10 - 11.

    More information

  158. Author: Josef Zeman, E307-6

    J. Zeman:
    "Comments on the test pressure";
    TÜV TIMES Supplement, 2004 (2004), 04; 10 - 11.

    More information

  159. Author: Josef Zeman, E307-6

    J. Zeman:
    "Ermüdung bei Druckgeräten: Alte Probleme, neue Pflichten";
    TÜV TIMES, 2001 (2001), 03; 10 - 11.

    More information

  160. Author: Josef Zeman, E307-6

    J. Zeman:
    "Neue spezifische Bestimmungen für zyklisch beanspruchte Druckgeräte";
    Schweiss-&Prüftechnik, 2001 (2001), 08; 124 - 125.

    More information

  161. Author: Josef Zeman, E307-6

    J. Zeman:
    "Pressure Equipment Industry: a global perspective";
    Australasian Welding Journal, 48 (2003), First Quarter; 2 - 3.

    More information

  162. Authors: Nenad Zrnic; S.M. Bosnjak; Klaus Hoffmann, E307-1

    N. Zrnic, S. Bosnjak, K. Hoffmann:
    "Parameter sensitivity analysis of non-dimensional models of quayside container cranes";
    Mathematical and Computer Modelling of Dynamical Systems, 16 (2010), 2; 145 - 160.

  163. Authors: Nenad Zrnic; Klaus Hoffmann, E307-1

    N. Zrnic, K. Hoffmann:
    "History of moving people: Lifting and conveying equipment";
    International Journal of Terraspace Science and Engineering, 5 (2012), 55 - 71.

  164. Authors: Nenad Zrnic; Klaus Hoffmann, E307-1

    N. Zrnic, K. Hoffmann:
    "Ship-to-Shore container cranes: from the beginning up to now (1959-2009)";
    ÖIAZ, 154 (2009), 7-12; 267 - 276.

  165. Authors: Nenad Zrnic; Klaus Hoffmann, E307-1; S.M. Bosnjak

    N. Zrnic, K. Hoffmann, S. Bosnjak:
    "Modelling of dynamic interaction between structure and trolley for mega container cranes";
    Mathematical and Computer Modelling of Dynamical Systems, Vol. 15 (2009), 3; 295 - 311.


Editorials in Scientific Journals


  1. Authors: Nithin Babu Rajendra Kurup, E307-3; Markus Puchinger, E307-3; Margit Gföhler, E307-3

    N. Babu Rajendra Kurup, M. Puchinger, M. Gföhler:
    "Forward dynamic optimization of handle path and muscle activity for handle based isokinetic wheelchair propulsion: A simulation study";
    Computer Methods in Biomechanics and Biomedical Engineering, 21 (2018), 9 pages.

    More information


Contributions to Books


  1. Author: Thomas Angeli, E307-3

    T. Angeli:
    "Ein besserer Fahrradantrieb";
    in: "Aspekte der Sportwissenschaft", Österreichische Sportwissenschaftliche Gesellschaft, Salzburg, 1996, 223 - 232.

  2. Author: Thomas Angeli, E307-3

    T. Angeli:
    "Simulation and measurement results of knee extension activated physiologically and by means of functional electrical stimulation";
    in: "Computer Methods in Biomechanics und Biomedical Engineering - 4", Gordon and Breach Science Publishers, 2003, ##.

  3. Authors: Thomas Angeli, E307-3; Margit Gföhler, E307-3; Thomas Eberharter, E307; Peter Lugner, E325-1; Laurenz Rinder, E307-3

    T. Angeli, M. Gföhler, T. Eberharter, P. Lugner, L. Rinder:
    "Optimiziation of the pedal path for cycling powered by lower extremity muscles activated by Functional Electrical Stimulation.";
    in: "Computer Methods in Biomechanics und Biomedical Engineering - 3", Gordon and Breach Science Publishers, 2001, ISBN: 90-5699-321-6, 263 - 268.

  4. Authors: Stefan Biffl, E194-01; Detlef Gerhard, E307-5; Arndt Lüder, Otto-von-Guericke U.
    Other persons involved: Stefan Biffl, E194-01; Arndt Lüder, Otto-von-Guericke U.; Detlef Gerhard, E307-5

    S. Biffl, D. Gerhard, A. Lüder:
    "Conclusions and Outlook on Research for Multi-Disciplinary Engineering for Cyber-Physical Production Systems";
    in: "Multi-Disciplinary Engineering of Cyber-Physical Production Systems", S. Biffl, A. Lüder, D. Gerhard (ed.); Springer, Switzerland, 2017, ISBN: 978-3-319-56344-2, 459 - 468.

  5. Authors: Stefan Biffl, E194-01; Detlef Gerhard, E307-5; Arndt Lüder, Otto-von-Guericke U.
    Other persons involved: Stefan Biffl, E194-01; Arndt Lüder, Otto-von-Guericke U.; Detlef Gerhard, E307-5

    S. Biffl, D. Gerhard, A. Lüder:
    "Introduction to the Multi-Disciplinary Engineering of Cyber-Physical Production Systems";
    in: "Multi-Disciplinary Engineering of Cyber-Physical Production Systems", S. Biffl, A. Lüder, D. Gerhard (ed.); Springer, Switzerland, 2017, ISBN: 978-3-319-56344-2, 1 - 24.

    More information

  6. Authors: Daniel Collado-Ruiz, TU Valencia; Hesamedin Ostad Ahmad Ghorabi, E307-2
    Other persons involved: Toshiharu Taura; Yukari Nagai

    D. Collado-Ruiz, H. Ostad Ahmad Ghorabi:
    "Influence of Environmental Information on Expert-perceived Creativity of Ideas";
    in: "Design Creativity 2010", T. Taura, Y. Nagai (ed.); issued by: T. Taura, Y. Nagai; Springer-Verlag, London, 2011, ISBN: 978-0-85729-223-0, 71 - 78.

    More information

  7. Author: Detlef Gerhard, E307-5
    Other person involved: Udo Lindemann

    D. Gerhard:
    "Daten- und Informationsmanagement PDM/PLM";
    in: "Handbuch Produktentwicklung", U. Lindemann (ed.); Carl Hanser Verlag, 2016, ISBN: 978-3-446-44518-5, 215 - 246.

  8. Author: Detlef Gerhard, E307-5
    Other person involved: Madjid Fathi

    D. Gerhard:
    "Integrating Electric Energy Demand of Machine Tool Processes as Resource for Production Planning Software";
    in: "Integrated Systems: Innovations and Applications", M. Fathi (ed.); Springer, Berlin Heidelberg, 2015, ISBN: 978-3-319-15897-6, 29 - 38.

    More information

  9. Author: Detlef Gerhard, E307-5
    Other persons involved: Stefan Biffl, E194-01; Arndt Lüder; Detlef Gerhard, E307-5

    D. Gerhard:
    "Product Lifecycle Management Challenges of CPPS";
    in: "Multi-Disciplinary Engineering for Cyber-Physical Production Systems", 1; S. Biffl, A. Lüder, D. Gerhard (ed.); Springer, 2017, ISBN: 978-3-319-56344-2, 89 - 110.

    More information

  10. Author: Detlef Gerhard, E307-5
    Other person involved: Madjid Fathi

    D. Gerhard:
    "The Role of Semantic Technologies in Future PLM";
    in: "Integration of Practice-Oriented Knowledge Technology: Trends and Prospectives", M. Fathi (ed.); Springer-Verlag, Berlin Heidelberg, 2012, ISBN: 978-3-642-34470-1, 157 - 170.

    More information

  11. Authors: Detlef Gerhard, E307-5; Andrea Denger; Michael Kaiser
    Other persons involved: Michael Abramovici; Rainer Stark

    D. Gerhard, A. Denger, M. Kaiser:
    "Implications of Open Innovation Approaches on Future PLM";
    in: "Proceedings of the 23rd CIRP Design Conference, Bochum, Germany, March 11th - 13th, 2013", M Abramovici, R. Stark (ed.); Springer-Verlag, Berlin Heidelberg, 2013, ISBN: 978-3-642-30816-1, 71 - 81.

    More information

  12. Author: Margit Gföhler, E307-3
    Other persons involved: Petra Gruber, E253-5; Dietmar Bruckner, E384; Christian Hellmich, E202-01; Heinz-Bodo Schmiedmayer, E325-1; Herbert Stachelberger, E166-06; I.C. Gebeshuber, E134-03

    M. Gföhler:
    "Technical Rebuilding of Movement Function Using Functional Electrical Stimulation";
    in: "Biomimetics - Materials, Structures and Processes. Series: Biological and Medical Physics, Biomedical Engineering", P. Gruber, D. Bruckner, Ch. Hellmich, H. Schmiedmayer, H. Stachelberger, I. Gebeshuber (ed.); issued by: Springer; Springer-Verlag, Berlin Heidelberg, 2011, (invited), ISBN: 978-3-642-11933-0, 219 - 244.

  13. Authors: Christoph Müller, E253-4; Manfred Berthold, E253-4; Margit Gföhler, E307-3

    Christoph Müller, Manfred Berthold, M. Gföhler:
    "Bewegende Architektur";
    in: "querschnitt", issued by: Fakultät für Architektur und Raumplanung Technische Universität Wien; Publikation zum Forschungstag 2016/17 der Fakultät für Architektur und Raumplanung, Wegweisungen 19, Wien, 2017, ISBN: 978-3-902707-32-1, 198 - 199.

  14. Authors: Hesamedin Ostad Ahmad Ghorabi, E307-2; Touba Rahmani, E307-5; Detlef Gerhard, E307-5
    Other persons involved: Michael Abramovici; Rainer Stark

    H. Ostad Ahmad Ghorabi, T. Rahmani, D. Gerhard:
    "Forecasting Environmental Profiles in the Early Stages of Product Development by Using an Ontological Approach";
    in: "Proceedings of the 23rd CIRP Design Conference, Bochum, Germany, March 11th - 13th, 2013", M Abramovici, R. Stark (ed.); Springer-Verlag, Berlin Heidelberg, 2013, ISBN: 978-3-642-30816-1, 715 - 724.

    More information

  15. Authors: Rainer Pamminger, E307-2; Erik Sehnal, E307-2; Wolfgang Wimmer, E307-2
    Other persons involved: Frances Gardiner, iSmithers; Eleanor Garmson, iSmithers

    R. Pamminger, E. Sehnal, W. Wimmer:
    "Energy efficiency labelling and criteria development for communicating energy efficiency of plastic processing machines";
    in: "Plastics and the Environment", F. Gardiner, E. Garmson (ed.); issued by: F. Gardiner, E. Garmson; Smithers Rapra, Shawbury, Shewsbury, Shropshire, 2010, (invited), ISBN: 978-1-84735-556-0, 39 - 57.

    More information

  16. Author: Wolfgang Wimmer, E307-2

    W. Wimmer:
    "Der ECODESIGN PILOT - Produkt-, Innovations-,Lern- und Optimierungstool für umweltgerechte Produktgestaltung";
    in: "Umweltgerechte Produktentwicklung, ein Leitfaden für Entwicklung und Konstruktion", issued by: DIN Deutsches Institut für Normung e.V.; BEUTH Verlag, Berlin, Wien, Zürich, 2002, (invited), ISBN: 3-410-14512-5, 1 - 12.

  17. Author: Wolfgang Wimmer, E307-2
    Other person involved: Mahendra S. Hundal

    W. Wimmer:
    "The Ecodesign Checklist Method - Design Assessment and Improvements";
    in: "Mechanical Life Cycle Handbook", M. S. Hundal (ed.); issued by: University of Vermont; Marcel Dekker, 2002, ISBN: 0-8247-0572-6, 199 - 216.

  18. Authors: Wolfgang Wimmer, E307-2; Robert Attwenger, E307-2; Maria Huber, E307-2

    W. Wimmer, R. Attwenger, M. Huber:
    "Umweltgerechte Produktgestaltung";
    in: "Nachhaltigkeit in der Elekro(nik)industrie, KERP Kompetenzzentrum", issued by: Düsseldorf; Fortschritt-Berichte VDI, Düsseldorf, 2006, ISBN: 3-18-317916-4, 79 - 91.

    More information


Contributions to Proceedings


  1. Authors: Zeeshan Ahmed; Detlef Gerhard, E307-5

    Z. Ahmed, D. Gerhard:
    "Contributions of PDM Systems in Organizational Technical Data Management";
    in: "The First IEEE International Conference On Computer, Control & Communication (IEEE-IC4 2007), Organized by Pakistan Navel Engineering College (PNEC), Karachi, in collaboration with IEEE and Higher Education Commission (HEC), Pakistan", The First International Conference On Computer, Control & Communication, Karachi, PAKISTAN, 2007, 26 - 30.

    More information

  2. Authors: Zeeshan Ahmed; Detlef Gerhard, E307-5

    Z. Ahmed, D. Gerhard:
    "Design Implementation of I-SOAS IPM for Advanced Product Data Management";
    in: "Second IEEE International Conference On Computer, Control & Communication (IEEE-IC4 2009), Organized by Pakistan Navel Engineering College (PNEC), In collaboration with IEEE and Higher Education Commission (HEC)", issued by: IEEE-IC4; IEEE, KARACHI, Pakistan, 2009, ISBN: 978-1-4244-3314-8, 18 - 23.

  3. Authors: Zeeshan Ahmed; Detlef Gerhard, E307-5

    Z. Ahmed, D. Gerhard:
    "Design Implementation of Semantic Oriented Agent and Knowledge based approach for Intelligent Human Machine Data Manipulation";
    in: "4th Virtual International Conference on Innovative Production Machines and Systems (IPROMS 2008), Manufacturing Engineering Centre Cardiff University", issued by: IPROMS; IPROMS 2008, Cardiff, UK, 2008.

    More information

  4. Authors: Zeeshan Ahmed; Detlef Gerhard, E307-5

    Z. Ahmed, D. Gerhard:
    "Designing a Dynamic Components and Agent based Approach for Semantic Information Retrieval";
    in: "6th CIIT Workshop on Research in Computing (CWRC Fall 2007) COMSATS Institute of Information Technology", COMSATS Institute of Information Technology, Abbottabad PAKISTAN, 2007.

    More information

  5. Authors: Zeeshan Ahmed; Detlef Gerhard, E307-5

    Z. Ahmed, D. Gerhard:
    "How does Ontology Contribute in Semantic Web Development ?";
    in: "6th CIIT Workshop on Research in Computing (CWRC Fall 2007) COMSATS Institute of Information Technology", COMSATS Institute of Information Technology, Abbottabad PAKISTAN, 2007.

    More information

  6. Authors: Zeeshan Ahmed; Detlef Gerhard, E307-5

    Z. Ahmed, D. Gerhard:
    "Information Engineering and Knowledge Management based approach towards Intelligent E-Learning Systems Development";
    in: "4th Virtual International Conference on Innovative Production Machines and Systems (IPROMS), by European Commission", issued by: IPROMS; IPROMS 2008, Cardiff UK, 2008, ISBN: 978-1904445-81-4, Paper ID 69, 3 pages.

  7. Authors: Zeeshan Ahmed; Detlef Gerhard, E307-5

    Z. Ahmed, D. Gerhard:
    "Semantic Oriented Agent based Approach towards Engineering Data Management, Web Information Retrieval and User System Communication Problems";
    in: "3rd International Conference for Internet Technology and Secured Transactions, Dublin Institute of Technology", ICITST, Dublin, IRELAND, 2008, ISBN: 0-9546628-2-2.

    More information

  8. Authors: Zeeshan Ahmed; Detlef Gerhard, E307-5

    Z. Ahmed, D. Gerhard:
    "Web to Semantic Web & Role of Ontology";
    in: "National Conference on Information and Communication Technologies (NCICT 2007),", National Conference on Information and Communication Technologies (NCICT 2007), Bannu PAKISTAN, 2007.

    More information

  9. Authors: Thomas Angeli, E307-3; Bernhard Gmeiner, E307-3; Christoph Kumpf, E307-3; Norbert Barta, E307-3; Roman Talla, E307-3

    T. Angeli, B. Gmeiner, C. Kumpf, N. Barta, R Talla:
    "Load On Tibia During Seated Execution Of Ordinary Calf Raises On The Multifunctional Dynamometer For Application In Space (mds)";
    in: "IAC 2015 Jerusalem", IAC 2015, 2015, 3 pages.

  10. Authors: Mulu Bayray, E307-6; Franz Rauscher, E307-6
    Other person involved: Pavel Mazal

    M Bayray, F. Rauscher:
    "Window Fourier Transform and Wavelet Transform in Acoustic Emission Signal Analysis";
    in: "EWGAE 2002 25th European Conference on Acoustic Emission Testing, Proceedings Vol. I", P. Mazal (ed.); issued by: Brno University of Technology; Czech Society for Non-destructive Testing, Prag, 2002, ISBN: 80-214-2174-6, 37 - 44.

    More information

  11. Authors: Irina Celades; Cristina Rocha; David Camocho; Kirsten Schmidt; Rainer Pamminger, E307-2; Stephan Schmidt, E307-2; Maria Kalleitner-Huber; Sabrina Veral; Teresa Ros

    I. Celades, C. Rocha, D. Camocho, K. Schmidt, R. Pamminger, St. Schmidt, M. Kalleitner-Huber, S. Veral, T. Ros:
    "KATCH_e: Introducing Circular Economy into higher-education design curricula - Overview of the training needs, state of the art, trends and policies";
    in: "Proceedings of the 18th European Roundtable on Sustainable Consumption and Production - Towards a Greener Challenge & Evolution in the Framework of the Circular Economy", Grafima Publications, Thessaloniki, 2017, ISBN: 978-618-5271-24-4, 887 - 896.

  12. Authors: Jullius Nde Cho, E307-5; Thomas Vosgien; Detlef Gerhard, E307-5

    J. Cho, T. Vosgien, D. Gerhard:
    "Engineering Knowledge Extraction for Semantic Interoperability between CAD, KBE and PLM Systems";
    accepted for publication in: "14th IFIP International Conference on Product Lifecycle Management (PLM17), July 9-12, 2016, Seville, ES", issued by: IFIP; Springer International Publishing, Springer International Publishing, 2017.

    More information

  13. Authors: Jullius Nde Cho, E307-5; Thomas Vosgien; Thorsten Prante; Detlef Gerhard, E307-5

    J. Cho, T. Vosgien, T. Prante, D. Gerhard:
    "KBE-PLM Integration Schema for Engineering Knowledge Re-use and Design Automation";
    in: "13th IFIP International Conference on Product Lifecycle Management (PLM16), July 11-13, 2016, Columbia, SC (USA)", 492; issued by: IFIP; Springer International Publishing, Springer International Publishing, 2016, ISBN: 978-3-319-54659-9, 43 - 55.

    More information

  14. Authors: Detlef Gerhard, E307-5; Sebastien Bougain, E307-5; Christian Nigischer, E307-5; Sinan Ugurlu, E307-5

    D. Gerhard, S. Bougain, C. Nigischer, S. Ugurlu:
    "Towards energy management in production planning software based on energy consumption as a planning resource";
    in: "12th Global Conference on Sustainable Manufacturing", 26; issued by: Procedia CIRP 26 ( 2015 ); Procedia CIRP 26 ( 2015 ), Procedia CIRP 26 ( 2015 ), 2015, 6 pages.

    More information

  15. Authors: Detlef Gerhard, E307-5; Sebastien Bougain, E307-5; Christian Nigischer, E307-5; Sinan Ugurlu, E307-5

    D. Gerhard, S. Bougain, C. Nigischer, S. Ugurlu et al.:
    "Integrating Energy Demand of Manufacturing Resources in Production Planning";
    in: "2014 International Conference on Production Research - Africa, Europe and Middle East", issued by: TU Cluj-Napoca; TU Cluj-Napoca, TU Cluj-Napoca, 2014, Paper ID 17, 5 pages.

    More information

  16. Authors: Detlef Gerhard, E307-5; Christoph Lutz, E307

    D. Gerhard, C. Lutz:
    "Implementation of practice-orientated IT-Systems for knowledge based configuration and design of customised products.";
    in: "Proceedings of The 43th CIRP International Conference on Manufacturing Systems - CIRP ICMS 2010", issued by: Cirp Icms 2010; Neuer wissenschaftlicher Verlag, Wien, 2010, ISBN: 978-3-7083-0686-5, 1060 - 1069.

    More information

  17. Authors: Detlef Gerhard, E307-5; Touba Rahmani, E307-5; Sebastien Bougain, E307-5

    D. Gerhard, T. Rahmani, S. Bougain:
    "Ontology-based integration of heterogeneous material data resources in Product Lifecycle Management";
    in: "Proceedings of 2013 IEEE International Conference on Systems, Man, and Cybernetics", IEEE Computer Society Press, 2013, ISBN: 978-1-4799-0652-9, 4589 - 4594.

    More information

  18. Author: Peter Kral, E307-3

    P. Kral:
    "Measurement Of Wear In Worm Gears; Impact Of Worm Geometry On Wear And Temperatures";
    in: "24th Danubia-Adria Symposium on Developments in Experimental Machanics", issued by: Universitatea "Lucian Blaga" din Sibiu. Facultatea de Inginerie, Asociaţia Română de Tensometrie (ARTENS); Universitatea "Lucian Blaga" din Sibiu. Facultatea de Inginerie, Asociaţia Română de Tensometrie (ARTENS), 2007, ISBN: 978-973-739-456-9, 171 - 172.

  19. Authors: Peter Kral, E307-3; Stefan Pausch
    Other persons involved: Mark Hadfield; Ying Wang

    P. Kral, S. Pausch:
    "Theories of Roughness and Wear - Verification and Comparison by Using Empirical Models";
    in: "2nd International Conference on Tribology in Environmental Design 2003; The Characteristics of Interfacing Surfaces - A Key Factor in Sustainable and Economic Products ", M. Hadfield, Y. Wang (ed.); Professional Engineering Publishing Limited, Suffolk, 2003, ISBN: 1860584152, 371 - 380.

  20. Authors: Christoph Lutz, E307; Detlef Gerhard, E307-5
    Other persons involved: T. J. Howard; W Chen; Tim C. McAloone; B.J. Hicks; S.J Culley

    C. Lutz, D. Gerhard:
    "IT-Based Configuration and Dimensioning of Customer Specific Products";
    in: "Proceedings of the 18th International Conference on Engineering Design (ICED11), Vol. 6", T. Howard, W. Chen, T. McAloone, B. Hicks, S. Culley (ed.); issued by: Design Society; Design Society, 2011, ISBN: 978-1-904670-26-1, 192 - 199.

    More information

  21. Authors: Helmut Mad, E307-3; Werner Mohl, MedUni Wien; Margit Gföhler, E307-3
    Other person involved: Serge van Sint Jan

    H. Mad, W. Mohl, M. Gföhler:
    "Prototype of a pneumatically operated heart catheter pump.";
    in: "Proc. 23rd Congress of the International Society of Biomechanics ISB 2011", S. van Sint Jan et al. (ed.); issued by: International Society of Biomechanics; Vrije Universiteit Brussel, Brussel, 2011, Paper ID 545, 2 pages.

  22. Authors: Christian Nigischer, E307-5; Detlef Gerhard, E307-5

    C. Nigischer, D. Gerhard:
    "Detailed Concept of the SysML Lightweight Visualization in PDM Systems";
    in: "Proceedings of the DESIGN 2018 15th International Design Conference", Design Society, 2018, ISBN: 978-953-7738-59-4, 2925 - 2936.

    More information

  23. Authors: Christian Nigischer, E307-5; Detlef Gerhard, E307-5

    C. Nigischer, D. Gerhard:
    "Lightweight visualization of SysML models in PDM systems";
    in: "Proceedings of the 21st International Conference on Engineering Design (ICED 17) Vol 3: Product, Services and Systems Design, Vancouver, Canada, 21-25.08.2017", issued by: Design Society; Design Society, 2017, ISBN: 978-1-904670-91-9, 9 pages.

    More information

  24. Authors: Hesamedin Ostad Ahmad Ghorabi, E307-2; Thomas Schäfer, E138-01; A. Spielauer; Gerold Aschinger, E134-01; D. Collado-Ruiz

    H. Ostad Ahmad Ghorabi, T. Schäfer, A. Spielauer, G. Aschinger, D. Collado-Ruiz:
    "Development of the Digital Storage Fuon";
    in: "Proceedings of the 19th International Conference on Engineering Design (ICED13), Design for Harmonies.", The Design Society, 2013, ISBN: 978-1-904670-45-2, 133 - 142.

  25. Authors: Rainer Pamminger, E307-2; Maria Kalleitner-Huber; Stephan Schmidt, E307-2; Cristina Rocha; David Camocho; Irina Celades; Kirsten Schmidt; Stig Hirsbak; Oihana Hernaez

    R. Pamminger, M. Kalleitner-Huber, St. Schmidt, C. Rocha, D. Camocho, I. Celades, K. Schmidt, S. Hirsbak, O. Hernaez:
    "Developing and testing a "Design for Sustainability (DfS)" - curriculum for vocational and education training (VET) in Austria";
    in: "Proceedings of the 18th European Roundtable on Sustainable Consumption and Production - Towards a Greener Challenge & Evolution in the Framework of the Circular Economy", Grafima Publications, Thessaloniki, 2017, ISBN: 978-618-5271-24-4, 897 - 905.

  26. Authors: Franz Rauscher, E307-6; Mulu Bayray, E307-6
    Other person involved: Pavel Mazal

    F. Rauscher, M Bayray:
    "Acoustic Emission Measurements on Shell Structures with Directly Attached Piezo Ceramic";
    in: "EWGAE 2002, 25th European Conference on Acoustic Emission Testing, Proceedings Vol. II", P. Mazal (ed.); issued by: Brno University of Technology; Czech Society for Non-destructive Testing, Prag, 2002, ISBN: 80-214-2174-6, 119 - 124.

    More information

  27. Authors: Werner Reichenfelser, E307-3; Harald Hackl, E307-3; Julia Wiedner, AUVA; Josef Hufgard, AUVA; Karin Gstaltner, AUVA; Stefan Mina, ARC; Sten Hanke, ARC; Margit Gföhler, E307-3

    W. Reichenfelser, H. Hackl, J. Wiedner, J. Hufgard, K. Gstaltner, S. Mina, S. Hanke, M. Gföhler:
    "Influence of FES cycling on spasticity in subjects with incomplete spastic paraplegia";
    in: "" Rehabilitation: Mobility, Exercise & Sports"", Assistive Technology Research Series, Vol.26, IOS Press, 2010, ISBN: 978-1-60750-080-3, 317 - 319.

    More information

  28. Authors: Laurenz Rinder, E307-3; Manfred Grafinger, E307-5

    L. Rinder, M. Grafinger:
    "Entwicklung, Beurteilung und Optimierung von Rotorprofilen mit der Profilsteigungsfunktion";
    in: "VDI-Berichte Schraubenmaschinen", Springer-Verlag, 2002.

  29. Authors: Laurenz Rinder, E307-3; Jaromir Svigler; L Rehounek; Martin Kuchler, E307-3

    L. Rinder, J. Svigler, L. Rehounek, M. Kuchler:
    "Temperaturdeforamtion der Rotoren bei nass laufenden Schraubenkompressoren";
    in: "Temperaturdeformation der Rotoren bei nass laufenden Schraubenkompressoren", issued by: Universität Dortmund - FEM; Universität Dortmund, Universität Dortmund, Heft 13, 2005, ISSN: 0945-1870, 17.

    More information

  30. Authors: Gert Schönnenbeck; Manfred Siefert; Michael Weigand, E307-3

    G. Schönnenbeck, M. Siefert, M. Weigand:
    "State Of The Art Development In A New Range Of Standard Reduction Gear Boxes From P.I.V. Reimers";
    in: "International Congress Gear Transmissions", Proceedingsof International Congress Gear Transmissions, Sofia, 1995.

  31. Authors: Harald Tschan, UNI Wien; Ramon Baron, Uni Wien; Inesa Benediktovna Kozlovskaya; Thomas Angeli, E307-3; Norbert Barta, E307-3; Georg Adamcik, E307-3; Roman Talla, E307-3; Norbert Bachl, UNI Wien

    H Tschan, R. Baron, I.B. Kozlovskaya, T. Angeli, N. Barta, G. Adamcik, R Talla, N Bachl:
    "Muscle strength in microgravity - implications for exercise countermeasures in space and their earth benefits";
    in: "Sports Medcon 2009 New Delhi", Sports Medcon, New Delhi, 2009, 49.

  32. Authors: Harald Tschan, UNI Wien; Ramon Baron, Uni Wien; Babara Wessner, Uni Wien; Thomas Angeli, E307-3; Norbert Barta, E307-3; Georg Adamcik, E307-3; Roman Talla, E307-3; Aleksey Netreba; Aleksey Shpakov; Elena Tomilovskaya; Inesa Benediktovna Kozlovskaya; Norbert Bachl, UNI Wien
    Other person involved: Dusan Hamar

    H Tschan, R. Baron, B Wessner, T. Angeli, N. Barta, G. Adamcik, R Talla, Al Netreba, A Shpakov, E Tomilovskaya, I.B. Kozlovskaya, N Bachl:
    "Resistance Exercise Training to Counteract Muscle Atrophy and Strength Loss in Long Term Spaceflight";
    in: "7th International Conference on Strength Training - Book of Abstracts", D Hamar (ed.); issued by: Dusan Hamar; 7th International Conference on Strength Training - Book of Abstracts, Bratislava, 2010, 48 - 50.

  33. Authors: Sinan Ugurlu, E307-5; Detlef Gerhard, E307-5; Sebastien Bougain, E307-5; Christian Nigischer, E307-5

    S. Ugurlu, D. Gerhard, S. Bougain, C. Nigischer:
    "Application Of Model Based Systems Engineering In Austrian Vocational Schools";
    in: "Proceedings of the 18th International Conference on Engineering and Product Design Education (E&PDE16), Design Education: Collaboration and Cross-Disciplinarity, Aalborg, Denmark, 8th-9th September 2016", 83; issued by: Design Society; Design Society, Design Society (2016), 2016, ISBN: 978-1-904670-62-9, 89 - 94.

    More information

  34. Author: Michael Weigand, E307-3

    M. Weigand:
    "Kühlwasserfiltration";
    in: "Seminar: Betrieb von Turbinenkondensatoren", VGB Power Tech e.V., Essen, 2001.

  35. Authors: Michael Weigand, E307-3; Klaus Ehrlenspiel

    M. Weigand, K. Ehrlenspiel:
    "Design to Cost in Gearing";
    in: "International Conference on Gears (VDI-Berichte 1230)", issued by: VDI-Gesellschaft Entwicklung-Konstruktion-Vertrieb; VDI Verlag GmbH, Düsseldorf, 1996, ISBN: 3-18-091230-8, 97 - 113.

  36. Authors: Michael Weigand, E307-3; Klaus Ehrlenspiel

    M. Weigand, K. Ehrlenspiel:
    "Design to Cost in Gearing (Deutsche Übersetzung)";
    in: "International Conference on Gears (VDI-Berichte 1230)", issued by: VDI-Gesellschaft Entwicklung-Konstruktion-Vertrieb; VDI Verlag GmbH, Düsseldorf, 1996, ISBN: 3-18-091230-8, 97 - 113.

  37. Authors: Laurenz Weilguny; Detlef Gerhard, E307-5

    L. Weilguny, D. Gerhard:
    "Applied Feature Technology - Review of Developing a generic Solution facilitating Data-Consistency and enabling Knowledge-based Engineering";
    in: "CIRP Design Conference 2008: Design Synthesis", issued by: CIRP; CIRP 2008, 2008, ISBN: 978-90-365-2634-0, 6 pages.

    More information

  38. Authors: Laurenz Weilguny; Detlef Gerhard, E307-5

    L. Weilguny, D. Gerhard:
    "Feature Technology For The Automotive Industry- A Knowledge Based Engineering Solution On The Basis Of Userdefined Festures In Pro/Engineer";
    in: "Nantes, France 22-24 October 2008", Proceedings of DET2008 5th International Conference on Digital Enterprise Technology, 2008, ISBN: 9782748345988, 8 pages.

    More information

  39. Author: Josef Zeman, E307-6

    J. Zeman:
    "Comparative Study EN 13445/ASME Section VIII Div. 1& 2";
    in: "Pressure Vessel and Piping Codes and Standards", issued by: Vol. 480; ASME, 2004, ISBN: 0-7918-4675-x, 285.

    More information

  40. Author: Josef Zeman, E307-6

    J. Zeman:
    "Design by Analysis (DBA)";
    in: "Pressure Equipment in Europe Unfired Pressure Vessels - The new standards", issued by: CEN - Comité Européen de Normalisation; CEN - Comité Européen de Normalisation, Brüssel, 2002, (invited), Tagungsband, 1 - 11.

    More information

  41. Author: Josef Zeman, E307-6

    J. Zeman:
    "The European Approach to Design by Analysis";
    in: "Pressure Vessel and Piping Codes and Standards", ASME, Vol. 439, 2002, 31 - 37.

    More information

  42. Authors: Rainer Züst; Wolfgang Wimmer, E307-2

    R. Züst, W. Wimmer:
    "Evaluation of Effective Improvement Strategies and Successful Measures for Sustainable Product Design";
    in: "Proceedings of the 1st International Conference for Design and Manufacture for Sustainable Development", 1st International Conference for Design and Manufacture for Sustainable Development, Liverpool, UK, 2002, 216 - 229.

    More information


Talks and Poster Presentations (with Proceedings-Entry)


  1. Authors: Michael Abramovici; Detlef Gerhard, E307-5

    M Abramovici, D. Gerhard:
    "A Flexible Web-Based PDM Approach to Support Virtual Engineering Cooperation";
    Talk: IEEE Computer Society 2000, Hawaii; 2000; in: "Proceedings of the 33 Annual Hawaii International Conference on System Sciences HICSS", (2000).

  2. Authors: Michael Abramovici; Detlef Gerhard, E307-5

    M Abramovici, D. Gerhard:
    "Flexible Management of Distributed Engineering Information Resources with PDM";
    Talk: 12th international Conference on Engineering Design ICED, München; 1999-08-24 - 1999-08-26; in: "Flexible Management of Distributed Engineering Information Resources with PDM", WDK 26, Volume 3 (1999), 1425 - 1430.

  3. Authors: Michael Abramovici; Detlef Gerhard, E307-5

    M Abramovici, D. Gerhard:
    "Use of PDM in Improving Design Processes - Stateof the Art, Potentials and User Perspectives";
    Talk: 11th international Conference on Engineering Design ICED, Tampere; 1997-08-19 - 1997-08-21; in: "Schriftenreihe WDK 25", Volume 3 (1997), 317 - 322.

  4. Authors: Michael Abramovici; Detlef Gerhard, E307-5; Lars Langenberg

    M Abramovici, D. Gerhard, L. Langenberg:
    "Application of PDM technology for Product Life Cycle Management";
    Talk: 4th CIRP International Seminar of Life Cycle Engineering, Berlin; 1997-06-26 - 1997-06-27; in: "Life Cycle Networks", (1997), 17 - 31.

  5. Authors: Michael Abramovici; Detlef Gerhard, E307-5; Lars Langenberg

    M Abramovici, D. Gerhard, L. Langenberg:
    "Application of Product Data Management Technology for Enterprise-Wide Distributed Produ";
    Talk: 10th International IFIP WG 5.2/5.3 Conference PROLAMAT 98, Trento; 1998-09-09 - 1998-09-12; in: "Globalization of Manufacturing in the Digital Communications Era 21st Century", (1998).

  6. Authors: Michael Abramovici; Detlef Gerhard, E307-5; Lars Langenberg

    M Abramovici, D. Gerhard, L. Langenberg:
    "Supporting Distributed Product Development Processes with PDM";
    Talk: CIRP Seminar STC Design, Berlin; 1998-05-14 - 1998-05-15; in: "New Tools and Workflows for Product Development", Fraunhofer, (1998).

  7. Authors: Michael Abramovici; Detlef Gerhard, E307-5; Lars Langenberg

    M Abramovici, D. Gerhard, L. Langenberg:
    "Unterstützung verteilter Entwicklungsprozesse durch EDM/PDM";
    Talk: VDI-EKV Tagung München 98, München; 1998-10-20 - 1998-10-21; in: "Informationsverarbeitung in der Konstruktion 98", VDI-Verlag, 1435 (1998), 69 - 86.

  8. Authors: Georg Adamcik, E307-3; Norbert Barta, E307-3; Roman Talla, E307-3; Inesa Benediktovna Kozlovskaya; Anatoli Grigoriev; Harald Tschan, UNI Wien; Norbert Bachl, UNI Wien; Thomas Angeli, E307-3

    G. Adamcik, N. Barta, R Talla, I.B. Kozlovskaya, A Grigoriev, H Tschan, N Bachl, T. Angeli:
    "Multifunctional Dynamometer for Application in Space";
    Poster: 10th ESA Life Sciences Symposium, Anger; 2008-06-22 - 2008-06-27; in: "Life In Space For Life On Earth", (2008).

  9. Authors: Zeeshan Ahmed; Detlef Gerhard, E307-5

    Z. Ahmed, D. Gerhard:
    "An Agent based Approach towards Metadata Extraction, Modelling and Information Retrieval over the Web";
    Poster: 6th International Semantic Web Conference and the 2nd Asian Semantic Web Conference 2007, Busan KOREA; 2007-11-12 - 2007-11-15; in: "First International Workshop on Cultural Heritage on the Semantic Web in conjunction with the 6th International Semantic Web Conference and the 2nd Asian Semantic Web Conference 2007", (2007), 2 pages.

    More information

  10. Authors: Zeeshan Ahmed; Detlef Gerhard, E307-5

    Z. Ahmed, D. Gerhard:
    "Personal Assistant towards Semantic Information Retrieval";
    Poster: 13th International Conference on Artificial Intelligence in Education (AIED 2007), Los Angeles USA; 2007-07-09 - 2007-07-13; in: "Fifth International Workshop on Ontologies and Semantic Web for E-Learning (SWEL'07)", (2007), 2 pages.

    More information

  11. Authors: Zeeshan Ahmed; Detlef Gerhard, E307-5

    Z. Ahmed, D. Gerhard:
    "Role of Ontology in Semantic Web Development";
    Poster: First International Workshop on Cultural Heritage on the Semantic Web in conjunction with the 6th International Semantic Web Conference and the 2nd Asian Semantic Web Conference 2007, Busan KOREA; 2007-11-11 - 2007-11-15; in: "First International Workshop on Cultural Heritage on the Semantic Web in conjunction with the 6th International Semantic Web Conference and the 2nd Asian Semantic Web Conference 2007", (2007), 2 pages.

    More information

  12. Authors: Emilia Ambrosini; Simona Ferrante; Margit Gföhler, E307-3; Werner Reichenfelser, E307-3; Jakob Karner, E307-3; Thomas Schauer; Christian Klauer; Giancarlo Ferrigno; Alessandra Pedrocchi

    E. Ambrosini, S. Ferrante, M. Gföhler, W. Reichenfelser, J Karner, T. Schauer, C. Klauer, G. Ferrigno, A. Pedrocchi:
    "A hybrid assistive system to support daily upper limb activities.";
    Poster: IFESS 2012, Banff, Canada; 2012-09-09 - 2012-09-12; in: "Proc. of 17th Annual International FES Society Conference", (2012), 4 pages.

  13. Authors: Emilia Ambrosini; Margit Gföhler, E307-3; Markus Puchinger, E307-3
    Other person involved: IEEE

    E. Ambrosini, M. Gföhler, M. Puchinger et al.:
    "The combined action of a passive exoskeleton and an EMG-controlled neuroprosthesis for upper limb stroke rehabilitation: First results of the RETRAINER project.";
    Poster: 15th IEEE Conference on Rehabilitation Robotics (ICORR 2017), London; 2017-07-17 - 2017-07-20; in: "IEEE Int Conf Rehabil Robot. 2017", IEEE (ed.); IEEE, 2017 (2017), ISSN: 1945-7901; 56 - 61.

  14. Authors: Hanns Amri, E325-5; Roland Feil, TU München; Manfred Hajek, TU München; Michael Weigand, E307-3

    H. Amri, R. Feil, M. Hajek, M. Weigand:
    "übersetzungsvariable Getriebe Für Drehflügler";
    Talk: 63. Deutscher Luft- und Raumfahrt Kongress 2014, Augsburg; 2014-09-16 - 2014-09-18; in: "63. Deutscher Luft- und Raumfahrt Kongress 2014", (2014), Paper ID 0225, 14 pages.

    More information

  15. Authors: Hanns Amri, E325-5; Willem Garre, TU München; Pflumm Tobias, TU - München; Pierre Paschinger, E307-3; Marco Mileti, TU- München; Manfred Hajek, TU München; Michael Weigand, E307-3

    H. Amri, W. Garre, P. Tobias, P. Paschinger, M. Mileti, M. Hajek, M. Weigand:
    "Helicopter Configurations And Drive Train Concepts For Optimal Variable Rotor-Speed Utilization";
    Talk: Deutscher Luft- und Raumfahrtkongress 2016, Braunschweig, Deutschland; 2016-09-13 - 2016-09-15; in: "Deutscher Luft- und Raumfahrtkongress 2016", (2016), Paper ID DGLRK2016_0103, 13 pages.

    More information

  16. Authors: Hanns Amri, E325-5; Katharina Hartenthaler, E307-3; Michael Weigand, E307-3
    Other persons involved: Hanns Amri, E325-5; Katharina Hartenthaler, E307-3; Michael Weigand, E307-3

    H. Amri, Kathi Hartenthaler, M. Weigand:
    "Mass and Kinematic Analysis of Compound Split with Simulation of the Shifting Process for Variable Rotor Speed";
    Talk: 74th Forum of then American Helicopter Society, Phoenix; 2018-05-21 - 2018-05-25; in: "74th Forum of then American Helicopter Society", H. Amri, Kathi Hartenthaler, M. Weigand (ed.); (2018), 15 pages.

    More information

  17. Authors: Hanns Amri, E325-5; Pierre Paschinger, E307-3; Michael Weigand, E307-3

    H. Amri, P. Paschinger, M. Weigand et al.:
    "Possible Technologies For A Variable Rotor Speed Rotorcraft Drive Train";
    Talk: 42nd European Rotorcraft Forum 2016, Lille, France; 2016-09-03 - 2016-09-05; in: "42nd European Rotorcraft Forum 2016", (2016), Paper ID ERF2016_108, 15 pages.

    More information

  18. Author: Thomas Angeli, E307-3

    T. Angeli:
    "Benefits der funktionellen Elektrostimulation für Rollstuhlfahrer";
    Talk: Deutschsprachige Medizinische Gesellschaft für Paraplegie, Zürich, Schweiz; 2004-09-29 - 2004-10-02; in: "Evidence-Based Medicine bei Querschnittlähmung", (2004), 1 pages.

  19. Author: Thomas Angeli, E307-3

    T. Angeli:
    "Erkenntnisse über Mechanismen, die zu Wirbelsäulenbeschwerden führen";
    Talk: 20. Ärztetage Grado 2011, Grado; 2011-05-29 - 2011-06-04; in: "20. Ärztetage Grado 2011", (2011), 2 - 35.

  20. Author: Thomas Angeli, E307-3

    T. Angeli:
    "Neue Strategien in der Rehabilitation und Prävention von Wirbelsäulenbeschwerden";
    Talk: 20. Ärztetage Grado 2011, Grado; 2011-05-29 - 2011-06-04; in: "20. Ärztetage Grado 2011", (2011), 36 - 48.

  21. Author: Thomas Angeli, E307-3

    T. Angeli:
    "Simulation of Functional Electrical Stimulated Rowing";
    Talk: Proceedings of the 2nd European Medical and Biological Engineering Conference, Vienna 4.-8, Dezember, Wien; 2002-09-19 - 2002-09-20; in: "IFMBE Proceedings 2002", (2002), 1234 - 1235.

  22. Authors: Thomas Angeli, E307-3; Norbert Barta, E307-3; Georg Adamcik, E307-3; Roman Talla, E307-3

    T. Angeli, N. Barta, G. Adamcik, R Talla:
    "Prototyp eines multifunktionellen Dynamometers für die Anwendung in der Schwerelosigkeit";
    Talk: 5. Ranshofener Leichtmetalltage 2008, Geinberg (invited); 2008-05-28 - 2008-05-29; in: "Zukunft Leichtmetalle, von der Forschung in die Anwendung", (2008), ISBN: 978-3-902092-05-2; 149 - 157.

  23. Authors: Thomas Angeli, E307-3; Margit Gföhler, E307-3; A. Karg

    T. Angeli, M. Gföhler, A. Karg:
    "Force-Length-Relationship for electrical stimulated Muscles";
    Poster: International Society of Biomechanics XIXth Congress, Dunendin, New Zealand; 2003-07-06 - 2003-07-11; in: "Proceedings", (2003), 1 pages.

  24. Authors: Thomas Angeli, E307-3; Margit Gföhler, E307-3; A. Karg

    T. Angeli, M. Gföhler, A. Karg:
    "Radfahren mit Paraplegikern";
    Keynote Lecture: 13. Internationales Symposiums für "Adapted Physical Activity" 2001, Wien; 2003; in: "Kongressbericht des 13. Internationalen Symposiums für "Adapted Physical Activity" 2001", (2003), 457 - 461.

  25. Authors: Thomas Angeli, E307-3; Margit Gföhler, E307-3; Peter Lugner, E325-1; Laurenz Rinder, E307-3

    T. Angeli, M. Gföhler, P. Lugner, L. Rinder:
    ""Radfahren mit Paraplegikern"";
    Talk: Adapted Physical Activity, Wien; 2003; in: "Kongressbericht des 13. Internationalen Symposiums für "Adapted Physical Activity" 2001", (2003), 457 - 461.

  26. Authors: Thomas Angeli, E307-3; Bernhard Gmeiner, E307-3; Christoph Kumpf, E307-3

    T. Angeli, B. Gmeiner, C. Kumpf:
    "Load On The Tibia During The Seated Execution Of Ordinary Calf Raises On The Multifunctional Dynamometer For Application In Space";
    Talk: 66th International Astronautical Congress 2015, Jerusalem; 2015-10-12 - 2015-10-16; in: "IAC 2015 Jerusalem", (2015), 1 pages.

  27. Authors: Thomas Angeli, E307-3; Bernhard Gmeiner, E307-3; Georg Wagenleitner, E307-3; Norbert Barta, E307-3; Georg Adamcik, E307-3; Roman Talla, E307-3

    T. Angeli, B. Gmeiner, G. Wagenleitner, N. Barta, G. Adamcik, R Talla:
    "Target-Oriented Loading Of The Lower Limb On A Leg Press In Microgravity";
    Talk: Life in Space for Life on Earth, Waterloo, Canada; 2014-06-15 - 2014-06-20; in: "Life in Space for Life on Earth", (2014), 29.

  28. Authors: Thomas Angeli, E307-3; Christoph Kumpf, E307-3; Bernhard Gmeiner, E307-3; Norbert Barta, E307-3; Georg Adamcik, E307-3; Roman Talla, E307-3

    T. Angeli, C. Kumpf, B. Gmeiner, N. Barta, G. Adamcik, R Talla:
    "Calculated forces on tibia and femur during Leg Press and seated execution of ordinary Calf Raise exercise due to ground reaction forces on the Multifunctional Dynamometer for Application in Space";
    Talk: ESA / ISGP / CNES Joint Life Sciences Meeting 2016 'Life in Space for Life on Earth´, Toulouse; France; 2016-06-05 - 2016-06-10; in: "Joint Life Science Meeting 'Life in Space for Life on Earth´", International Society for Gravitational Physiology (ISGP), (2016), 181 - 182.

  29. Authors: Thomas Angeli, E307-3; Roman Talla, E307-3; Elena Fomina; Norbert Barta, E307-3; Georg Adamcik, E307-3; Harald Tschan, UNI Wien; Norbert Bachl, UNI Wien; Inesa Benediktovna Kozlovskaya

    T. Angeli, R Talla, E. Fomina, N. Barta, G. Adamcik, H Tschan, N Bachl, I.B. Kozlovskaya:
    "A study on the force gain of Multifunctional Dynamometer for Application in Space for 70 days compared with whole isolation time of 520 days during the "Mars 500" Isolation Project";
    Poster: INTERNATIONAL Society for Gravitational Physiology. Annual Meeting (36; 2015; Ljubljana), Ljubljana; 2015-06-07 - 2015-06-12; in: "Book of abstracts / International Society for Gravitational Physiology, 36th Annual Meeting, June 7-12, 2015, Ljubljana, Slovenia ; Igor B. Mekjavic (ed). - Ljubljana: Studio print, 2015", (2015), ISBN: 978-961-93848-0-0; 94.

  30. Authors: Thomas Angeli, E307-3; Roman Talla, E307-3; Elena Fomina; Norbert Barta, E307-3; Georg Adamcik, E307-3; Harald Tschan, UNI Wien; Norbert Bachl, UNI Wien; Inesa Benediktovna Kozlovskaya

    T. Angeli, R Talla, E. Fomina, N. Barta, G. Adamcik, H Tschan, N Bachl, I.B. Kozlovskaya:
    "Diagnostic Data Of The Exercise Bench Press, Leg Press And Calf Raises During The Training On The Multifunctional Dynamometer For Application In Space Compared With The Results Of The Whole Isolation Time During The .Mars 500. Project";
    Talk: 65th International Astronautical Congress, Toronto, Canada; 2014-09-29 - 2014-10-03; in: "65th International Astronautical Congress", (2014), Paper ID IAC-14.A1.2.8, 3 pages.

  31. Authors: Thomas Angeli, E307-3; Roman Talla, E307-3; Elena Fomina; Norbert Barta, E307-3; Georg Adamcik, E307-3; Harald Tschan, UNI Wien; Norbert Bachl, UNI Wien; Inesa Benediktovna Kozlovskaya

    T. Angeli, R Talla, E. Fomina, N. Barta, G. Adamcik, H Tschan, N Bachl, I.B. Kozlovskaya:
    "Gain Or Loss Of Muscle Force During The "Mars 500" Project - Diagnostic Data Of The Whole Isolation Time During The "Mars 500" Project Measured On The Multifunctional Dynamometer For Application In Space";
    Poster: Life in Space for Life on Earth, Waterloo, Canada; 2014-06-15 - 2014-06-20; in: "Life in Space for Life on Earth", (2014), 96.

  32. Authors: Thomas Angeli, E307-3; Roman Talla, E307-3; Elena Fomina; Norbert Barta, E307-3; Harald Tschan, UNI Wien; Norbert Bachl, UNI Wien; Inesa Benediktovna Kozlovskaya

    T. Angeli, R Talla, E. Fomina, N. Barta, H Tschan, N Bachl, I.B. Kozlovskaya:
    "Mars 500: Training and Diagnostic with a Multifunctional Dynamometer for Application in Space";
    Talk: Life in Space for Life on Earth Symposium 2012, Aberdeen, United Kingdom; 2012-06-18 - 2012-06-22; in: "Life in Space for Life on Earth Symposium 2012", (2012), 65 - 66.

    More information

  33. Authors: Nithin Babu Rajendra Kurup, E307-3; Margit Gföhler, E307-3

    N. Babu Rajendra Kurup, M. Gföhler:
    "A Computational Optimization of a Continuous Handle Path";
    Talk: 10th International Conference on Advanced Computational Engineering and Experimenting, Split, Croatia; 2016-07-03 - 2016-07-06; in: "Acex2016 - Abstract Book", (2016), 120.

  34. Authors: Nithin Babu Rajendra Kurup, E307-3; Margit Gföhler, E307-3

    N. Babu Rajendra Kurup, M. Gföhler:
    "A preliminary study on the influence of cadence on path optimized handle-based propulsion for wheelchairs";
    Talk: The 14th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Tel Aviv, Israel; 2016-09-20 - 2016-09-22; in: "CMBBE2016 book of abstracts", (2016), 76.

  35. Authors: Nithin Babu Rajendra Kurup, E307-3; Markus Puchinger, E307-3; Margit Gföhler, E307-3
    Other persons involved: Nithin Babu Rajendra Kurup, E307-3; Markus Puchinger, E307-3; Margit Gföhler, E307-3

    N. Babu Rajendra Kurup, M. Puchinger, M. Gföhler:
    "Dynamically Optimized Muscle Activity Patterns From A Novel Handle Based Propulsion Movement For A Wheelchair";
    Talk: 35th Conference of the International Society of Biomechanics in Sports, Köln; 2017-06-14 - 2017-06-18; in: "International Society of Biomechanics Conference Proceedings", N. Babu Rajendra Kurup, M. Puchinger, M. Gföhler (ed.); International Society of Biomechanics in Sports (ISBS), German Sport University Cologne, Köln (Cologne) (2017), Paper ID 35, 4 pages.

    More information

  36. Authors: Nithin Babu Rajendra Kurup, E307-3; Markus Puchinger, E307-3; Margit Gföhler, E307-3

    N. Babu Rajendra Kurup, M. Puchinger, M. Gföhler:
    "Preliminary analysis of kinematics and muscle activity on a novel handle based wheelchair propulsion mechanism";
    Talk: 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and 3rd Conference on Imaging and Visualization, CMBBE 2018, Lisbon; 2018-03-26 - 2018-03-29; in: "15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering", (2018), 1 pages.

    More information

  37. Authors: Nithin Babu Rajendra Kurup, E307-3; Markus Puchinger, E307-3; Thomas Keck, E307-3; Margit Gföhler, E307-3

    N. Babu Rajendra Kurup, M. Puchinger, T. Keck, M. Gföhler:
    "Wrist kinematics and kinetics during wheelchair propulsion with a novel handle-based propulsion mechanism";
    Talk: 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, Honolulu; 2018-07-17 - 2018-07-21; in: "Conference Proceedings: 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society", (2018), 9 pages.

    More information

  38. Authors: Norbert Barta, E307-3; Georg Adamcik, E307-3; Roman Talla, E307-3; Inesa Benediktovna Kozlovskaya; Harald Tschan, UNI Wien; Norbert Bachl, UNI Wien; Thomas Angeli, E307-3

    N. Barta, G. Adamcik, R Talla, I.B. Kozlovskaya, H Tschan, N Bachl, T. Angeli:
    "Eccentric Resistance Training As Countermeasure In Microgravity.";
    Talk: ELGRA Symposium: "In the Footsteps of Columbus", Bonn; 2009-09-01 - 2009-09-04; in: "ELGRA Biennial Symposium and General Assembly "In the Footsteps of Columbus"", (2009), 128.

  39. Authors: Nikola Bojanic; Margit Gföhler, E307-3; Marcus Pandy; Manfred Grafinger, E307-5; Claudia Kronnerwetter
    Other persons involved: John Middleton; Nigel Shrive

    N Bojanic, M. Gföhler, MG Pandy, M. Grafinger, C. Kronnerwetter:
    "MR-based Lower-limb Musculoskeletal Model of a Child";
    Talk: 7th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, CMBBE2006, Antibes, France (invited); 2006-03-22 - 2006-03-25; in: "Computer Methods in Biomechanics and Biomedical Engineering", J. Middleton, N.G. Shrive (ed.); First Numerics Ltd., (2006), ISBN: 0-9549670-2-x; Paper ID 240 MAS, 6 pages.

  40. Authors: Maria Bulgheroni; Margit Gföhler, E307-3

    M. Bulgheroni, M. Gföhler et al.:
    "REACHING AND GRASPING TRAINING BASED ON ROBOTIC HYBRID ASSISTANCE FOR NEUROLOGICAL PATIENTS Telehealth and Assistive Technology / 847: Intelligent Systems and Robotics (TAT 2016)";
    Talk: IASTED International Conference on Intelligent Systems and Robotics, Zürich, CH; 2016-10-06 - 2016-10-08; in: "Telehealth and Assistive Technology / 847: Intelligent Systems and Robotics (TAT 2016)", ACTA press, 847 (2016), 1 - 8.

  41. Authors: Maria Bulgheroni; Margit Gföhler, E307-3; Markus Puchinger, E307-3

    M. Bulgheroni, M. Gföhler, M. Puchinger et al.:
    "Reaching And Grasping Training Based On Robotic Hybrid Assistance For Neurological Patients";
    Talk: 12th Vienna International Workshop on FES, Wien; 2016-09-08 - 2016-09-09; in: "12th Vienna International Workshop on FES", (2016), 21 - 24.

  42. Authors: Daniel Collado-Ruiz, TU Valencia; Hesamedin Ostad Ahmad Ghorabi, E307-2

    D. Collado-Ruiz, H. Ostad Ahmad Ghorabi:
    "LCA within design: not a matter of "just doing it";
    Talk: XIV International Congress on Project Engineeering, Madrid, Spain; 2010-06-30 - 2010-07-02; in: "XIV International Congress on Project Engineeering", (2010), ISBN: 978-84-614-2607-2; Paper ID 08-024, 10 pages.

    More information

  43. Authors: Stefano Dalla Gasperina, Polimi; Marta Gandolla, Polimi; Markus Puchinger, E307-3; Margit Gföhler, E307-3; Alessandra Pedrocchi, Polimi

    S. Dalla Gasperina, M. Gandolla, M. Puchinger, M. Gföhler, A. Pedrocchi et al.:
    "Multi-modal human-machine control interfaces of upper limb motorized exoskeletons for severely impaired patients";
    Poster: 2018 7th IEEE International Conference on Biomedical Robotics and Biomechatronics (BIOROB), Enschede; 2018-08-26 - 2018-08-29; in: "2018 7th IEEE International Conference on Biomedical Robotics and Biomechatronics (Biorob)", (2018), 6 pages.

    More information

  44. Authors: Klaus Decker, E307-1; Martin Egger, E307-1; Alexander Haber, E307-1; Christoph Pillichshammer

    K. Decker, M. Egger, A. Haber, C. Pillichshammer:
    "Drive power of discharge belt conveyor - comparison of calculation simulation and measurement";
    Talk: MHCL '15, Wien; 2015-09-23 - 2015-09-25; in: "XXI International conference on material handling, constructions and logistics", (2015), ISBN: 978-86-7083-863-5; 117 - 122.

  45. Authors: Klaus Decker, E307-1; Thomas Gabmayer, E307-1; Klaus Hoffmann, E307-1

    K. Decker, T. Gabmayer, K. Hoffmann:
    "Determination of the Stresses in a Metal Band of a Conveyor with a Skewed Cylindrical Tail Pulley";
    Poster: 26th Danubia-Adria Symposium, Leoben; 2009-09-23 - 2009-09-26; in: "26th Symposium on Advances in Experimental Mechanics", (2009), ISBN: 978-3-902544-02-5; 35 - 36.

  46. Authors: Adriana Diaz, ECODESIGN company; Rainer Pamminger, E307-2; Wolfgang Wimmer, E307-2
    Other person involved: Rebeka Kovačič Lukman

    A. Diaz, R. Pamminger, W. Wimmer:
    "Ecodesign methodology for textile coverings used in the European construction and transport industry";
    Talk: ERSCP 2014 14-16 October 2014 Portoroz, Slovenia, Portoroz, Slovenia; 2014-10-14 - 2014-10-16; in: "ERSCP 2014 14-16 October 2014 Portoroz, Slovenia", R. Kovačič Lukman et al. (ed.); Nigrad d.d., Maribor, 2014, (2014), ISBN: 978-961-93738-1-1; 926 - 935.

    More information

  47. Authors: Paul Ecker, E166-02-2; Benjamin Lukitsch, E166-02-2; Christoph Janeczek, E307-3; Martin Elenkov, E307-3; Bahram Haddadi, E166-02-2; Christian Jordan, E166-02-2; Margit Gföhler, E307-3; Michael Harasek, E166-02-2

    P. Ecker, B. Lukitsch, C. Janeczek, M. Elenkov, B. Haddadi, C. Jordan, M. Gföhler, M. Harasek:
    "Prediction of Hemolysis in a Rotary Blood Pump using CFD";
    Talk: 15th Minisymposium Verfahrenstechnik, Leoben; 2019-04-29 - 2019-04-30; in: "Conference Proceedings", (2019), ISBN: 978-3-200-06348-8; 42 - 45.

  48. Authors: Michael Eder, E307-1; Georg Kartnig, E307-1

    M. Eder, G. Kartnig:
    "Calcuation method to dertermine the throughput and the energy consumption of S/R shuttle systems";
    Talk: MHCL 2017, Belgrad; 2017-10-04 - 2017-10-06; in: "XXII International conference on material handling, constructions and logistics", (2017), 201 - 206.

  49. Authors: Michael Eder, E307-1; Georg Kartnig, E307-1

    M. Eder, G. Kartnig:
    "Durchsatzoptimierung von Shuttle-Systemen mithilfe eines analytischen Berechnungsmodells";
    Talk: WGTL, Stuttgart, Deutschland; 2016-09-28 - 2016-09-29; in: "Tagungsband zum 12. Fachkolloquium der Wissenschaftlichen Gesellschaft f. Techn. Logistik", (2016), 171 - 177.

  50. Authors: Michael Eder, E307-1; Georg Kartnig, E307-1

    M. Eder, G. Kartnig:
    "Geometrieoptimierung von Shuttle-Systemen mit Hilfe eines analytischen Berechnungsmodells";
    Talk: 25. Deutscher Materialfluss-Kongress, München; 2016-03-17 - 2016-03-18; in: "25. Deutscher Materialfluss-Kongress", VDI Verlag, 2016 (2016), ISBN: 978-3-18-092275-1; 113 - 126.

  51. Authors: Michael Eder, E307-1; Georg Kartnig, E307-1

    M. Eder, G. Kartnig:
    "Throughput analysis of S/R shuttle systems and ideal geometry for high performance";
    Talk: MHCL '15, Wien; 2015-09-23 - 2015-09-25; in: "XXI International conference on material handling, constructions and logistics", (2015), ISBN: 978-86-7083-863-5; 193 - 198.

  52. Authors: Martin Egger, E307-1; Klaus Decker, E307-1
    Other persons involved: Willibald Günthner; Friedrich Krause; Andre Katterfeld

    M. Egger, K. Decker:
    "Horizontallastverhältnis - Gegenüberstellung von Theorie, Messung und Numerischer Simulation";
    Talk: Fachtagung Schüttgutfördertechnik 2014, München; 2014-09-17 - 2014-09-18; in: "Fachtagung Schüttgutfördertechnik 2014 - Innovationen in der Schüttguttechnik", W. Günthner, F. Krause, A. Katterfeld (ed.); (2014).

  53. Authors: Martin Egger; Klaus Hoffmann, E307-1

    M. Egger, K. Hoffmann:
    "Flat Belt Conveyor";
    Talk: The First Cappadocia Mechanical Engineering Symposium, Cappadocia; 2004-07-14 - 2004-07-16; in: "Proceedings of the First Cappadocia International Mechanical Engineering Symposium", (2004), 6 pages.

  54. Authors: Martin Egger; Klaus Hoffmann, E307-1

    M. Egger, K. Hoffmann:
    "Lateral Running of flat belts: The Angled, Conical Pulley";
    Talk: 12th IFToMM World Congress, Besancon; 2007-06-18 - 2007-06-21; in: "Tagungsband 12th IFToMM World Congress", (2007), 1 - 4.

  55. Authors: Martin Egger; Klaus Hoffmann, E307-1

    M. Egger, K. Hoffmann:
    "On Centring Effects on Flat Conveyor Belts";
    Talk: 4th International Conference for Conveying and Handling of Particulate Solids, Budapest; 2003-05-27 - 2003-05-30; in: "The 4th International conference for Conveying and Handling of Particulate Solids - Proceedings", (2003), 14.53 - 14.58.

  56. Authors: Martin Egger; Klaus Hoffmann, E307-1

    M. Egger, K. Hoffmann:
    "Tracking of Flat Belts";
    Talk: 6th international Conference for Conveying and Handling of Particulate Solids, Brisbane; 2009-08-03 - 2009-08-07; in: "Proceedings of CHoPS+ICBMH", Engineers Australia, Australia (2009), ISBN: 978-0858259065; 332 - 337.

  57. Authors: Martin Egger; Klaus Hoffmann, E307-1

    M. Egger, K. Hoffmann:
    "Tracking of Flat Belts by Skewing Pulley Axis";
    Talk: 13 th World congress in Mechanism and Machine Science, Guanajuato; 2011-06-19 - 2011-06-25; in: "13 th World Congress in Mechanism and Machine Science", (2011), Paper ID A9 329, 6 pages.

  58. Authors: Prisca Eser, Univ. of Melbourne; Thomas Angeli, E307-3; Angela Frotzler, SPZ; Hans Schiessl

    P. Eser, T. Angeli, A. Frotzler, H. Schiessl:
    "Changes in bone proportionality and muscle-bone relationship of the paralysed extremities after spinal cord injury: a cross-sectional study employing peripheral quantitative computed tomography. International Society of Musculoskeletal and Neuronal Interactions";
    Talk: International Society for Musculoskeletal and Neuronal Interactions, Bad Liebenzell, Deutschland; 2005-05-05 - 2005-05-08; in: "2. Black Forest Forum for Musculoskeletal Interactions", (2005).

  59. Authors: Dörte Freisleben; Bernd Wenge; Detlef Gerhard, E307-5

    D. Freisleben, B. Wenge, D. Gerhard:
    "Einführung eines EDM/PDM-Systems in einem Unternehmen des öffentlichen Personennahverkehrs (ÖPNV)";
    Talk: VDI-EKV Tagung München 99, München; 1999-10-19 - 1999-10-20; in: "Informationsverarbeitung in der Konstruktion 99", VDI-Verlag, 1497 (1999), 187 - 206.

  60. Authors: Angela Frotzler, SPZ; Yvonne Zehnder; Prisca Eser, Univ. of Melbourne; Thomas Angeli, E307-3; Hans Knecht

    A. Frotzler, Y. Zehnder, P. Eser, T. Angeli, H. Knecht:
    "Veränderung der Knochenparameter bei langjährig querschnitt-gelähmten Patienten mittels pQCT";
    Talk: Osteologie 2005, Basel; 2005; in: "Osteologie 2005", (2005), ##.

  61. Authors: Thomas Gabmayer, E307-1; Klaus Hoffmann, E307-1; Klaus Decker, E307-1

    T. Gabmayer, K. Hoffmann, K. Decker:
    "Optical measuring system to acquire and control the position of running metal bands";
    Poster: 24th DANUBIA-ADRIA Symposium on Developments in Experimental Mechanics, Sibiu; 2007-09-19 - 2007-09-22; in: "24th DANUBIA-ADRIA Symposium on Developments in Experimental Mechanics", (2007), ISBN: 978-973-739-456-9; 67 - 68.

  62. Author: Carsten Gachot, E307-3

    C. Gachot:
    "Maßgeschneiderte Materialoberflächen und deren Potenzial in der Tribologie";
    Talk: ATK 2017, Aachen; 2017-03-07 - 2017-03-08; in: "Antriebstechnisches Kolloquium 2017", (2017), ISBN: 9783743148970.

  63. Authors: Marta Gandolla; Margit Gföhler, E307-3; Markus Puchinger, E307-3
    Other person involved: IEEE

    M. Gandolla, M. Gföhler, M. Puchinger et al.:
    "BRIDGE - Behavioural reaching interfaces during daily antigravity activities through upper limb exoskeleton: Preliminary results.";
    Poster: 15th IEEE Conference on Rehabilitation Robotics (ICORR 2017), London; 2017-07-17 - 2017-07-20; in: "The 15th IEEE Conference on Rehabilitation Robotics (ICORR 2017)", IEEE (ed.); IEEE, 2017 (2017), ISSN: 1945-7901; 1007 - 1012.

  64. Authors: Marta Gandolla; Margit Gföhler, E307-3; Markus Puchinger, E307-3
    Other person involved: Pulsus

    M. Gandolla, M. Gföhler, M. Puchinger et al.:
    "Upper limb assistive devices for muscular dystrophy patients: Proposed approaches";
    Talk: Neuromuscular Diseases 2017 Conference, Rome (invited); 2017-07-24 - 2017-07-26; in: "J Spine 2017", Pulsus (ed.); J Spine, 6/4 (2017), ISSN: 2165-7939; 71.

    More information

  65. Author: Detlef Gerhard, E307-5

    D. Gerhard:
    "Erfolgsstrategien für effiziente IT-Unterstützung im Sondermaschinen- und Anlagenbau aus Sicht eines KMU";
    Talk: Digital Engineering Forum 2004, Bochum; 2004; in: "Festschrift 10 Jahre Lehrstuhl Maschinenbauinformatik der Ruhr-Universität Bochum", (2004).

  66. Author: Detlef Gerhard, E307-5

    D. Gerhard:
    "Semantic Technologies in PLM - Vision, Requirements, Approaches";
    Keynote Lecture: 17. Internationales Hochtechnologiesymposium - Technologische Innovationen in der Produktentwicklung, Piracicaba (invited); 2012-10-01 - 2012-10-05; in: "Tagungsband 17. Internationales Hochtechnologiesymposium - Technologische Innovationen in der Produktentwicklung", (2012), 11 pages.

    More information

  67. Author: Detlef Gerhard, E307-5

    D. Gerhard:
    "Using a Product Data Management System as Basis for Multi-disciplinary Education in Engineering Design";
    Talk: ConnectED 2007 International Conference on Design Education, Sydney, Australien; 2007-07-09 - 2007-07-12; in: "Proceedings of ConnectED 2007 International Conference on Design Education", (2007), Paper ID 231, 4 pages.

    More information

  68. Authors: Detlef Gerhard, E307-5; Manfred Grafinger, E307-5

    D. Gerhard, M. Grafinger:
    "Integrative Engineering Design Using Product Data Management Systems In Education";
    Talk: 11th International Conference on Engineering and Product Design Education, Brighton; 2009-09-10 - 2009-09-11; in: "11th International Conference on Engineering and Product Design Education", (2009), 6 pages.

    More information

  69. Authors: Detlef Gerhard, E307-5; Touba Rahmani, E307-5

    D. Gerhard, T. Rahmani:
    "PDM based Lifecycle Analysis - A Case Study";
    Talk: Entwerfen - Entwickeln - Erleben EEE2012, Dresden; 2012-06-14; in: "Entwerfen Entwickeln Erleben: Methoden und Werkzeuge in der Produktentwicklung", TUDpress, (2012), ISBN: 978-3-942710-80-0; Paper ID 205, 7 pages.

    More information

  70. Authors: Detlef Gerhard, E307-5; Sinan Ugurlu, E307-5

    D. Gerhard, S. Ugurlu:
    "Integrative Product Creation - Results from a New Course in a Learning Factory";
    Talk: E&PDE 2014 16th International conference on Engineering and Product Design, University of Twente, The Netherlands, Enschede; 2014-09-04 - 2014-09-05; in: "16th International Conference on Engineering and Product Design Education", Design Society, DS 78 (2014), ISBN: 978-1-904670-56-8; 543 - 548.

    More information

  71. Authors: Detlef Gerhard, E307-5; Laurenz Weilguny

    D. Gerhard, L. Weilguny:
    "Implementation of a Knowledge-Based Engineering Concept using Feature Technolog at an Automotive OEM";
    Talk: 17th International Conference on Engineering Design ICED09, Stanford, California, USA; 2009-08-24 - 2009-08-27; in: "Proceedings of the 17th International Conference on Engineering Design (ICED'09), Vol. 7", (2009), ISBN: 9-781904-670117; Paper ID 7-69, 12 pages.

    More information

  72. Authors: Detlef Gerhard, E307-5; Laurenz Weilguny

    D. Gerhard, L. Weilguny:
    "Review on the Implementation of a KBE Concept using Feature Technology at an automotive OEM";
    Talk: 3rd International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2009), Munich, Germany; 2009-10-05 - 2009-10-07; in: "3rd International Conference on Changeable, Agile, Reconfigurable and Virtual Production", (2009), 10 pages.

    More information

  73. Authors: Margit Gföhler, E307-3; Thomas Angeli, E307-3; Peter Lugner, E325-1

    M. Gföhler, T. Angeli, P. Lugner:
    "Adjustment of Individual Stimulation Parameters for FES Cycling.";
    Poster: 4th World Congress on Biomechanics, Calgary; 2002-08-03 - 2002-08-08; in: "Proc. 4th World Congress on Biomechanics", (2002), 1 - 2.

  74. Authors: Margit Gföhler, E307-3; Thomas Angeli, E307-3; Peter Lugner, E325-1

    M. Gföhler, T. Angeli, P. Lugner:
    "Cycling by Means of FES - Simulation and Practical Application. ";
    Talk: 4th World Congress on Biomechanics, Calgary (invited); 2002-08-03 - 2002-08-08; in: "Proc. 4th World Congress on Biomechanics, ", (2002), 1 - 2.

  75. Authors: Margit Gföhler, E307-3; Thomas Angeli, E307-3; Peter Lugner, E325-1

    M. Gföhler, T. Angeli, P. Lugner:
    "Modeling of Artificially Activated Muscle and Application to FES Cycling";
    Talk: 12th International Conference on Mechanics in Medicine and Biology, Greece; 2002-09-09 - 2002-09-13; in: "International Conference on Mechanics in Medicine and Biology", Greece (2002), 93 - 99.

  76. Authors: Margit Gföhler, E307-3; Thomas Angeli, E307-3; J Weiss

    M. Gföhler, T. Angeli, J. Weiss:
    "Measurements on the Effect of Taiji Training on Muscle Coordination für Maintaining Balance";
    Poster: 7. Symposium der dvs-Sektion Biomechanik, Köln; 2003-03-13 - 2003-03-15; in: "Biologische Systeme", Schriften der Deutschen Vereinigung für Sportwissenschaft, DVS Band 135 (2003), ISSN: 1430-2225; 12 - 17.

  77. Authors: Margit Gföhler, E307-3; Christoph Janeczek, E307-3; Alen Karabegovic, E307-3; Livia Futter, E307; Michael Harasek, E166-02-2; Bahram Haddadi, E166-02-2; Christian Jordan, E166-02-2; Claus G. Krenn; Susanna Neudl, Meduni Wien; Roman Ullrich

    M. Gföhler, C. Janeczek, A. Karabegovic, L. Futter, M. Harasek, B. Haddadi, C. Jordan, C. Krenn, S. Neudl, R. Ullrich:
    "Intracorporeal Membrane Catheter for CO2 Reduction in the Blood - Drive Unit and Control System";
    Poster: 44th ESAO and 7th IFAO Congress, Vienna; 2017-09-06 - 2017-09-09; in: "International Journal of Artificial Organs", Wichtig Publishing, Volume 40 Number 8 August (2017), ISSN: 0391-3988; 458.

    More information

  78. Authors: Margit Gföhler, E307-3; AJK van Soest AJK; LJR Casius

    M. Gföhler, A. van Soest AJK, L. Casius:
    "Can FES cycling be improved by releasing the ankle joint?";
    Talk: IX Internatinal Symposium on Computer Simulation in Biomechanics, Sydney, Australia; 2003-07-01 - 2003-07-04; in: "Computer Simulation in Biomechanics", (2003).

  79. Authors: Margit Gföhler, E307-3; Arthur van Soest; Richard Casius

    M. Gföhler, AJK van Soest, R Casius:
    "Effects of releasing the ankle joint on FES cycling.";
    Talk: 3rd International Congress on Restoration of (wheeled) Mobility in SCI Rehabilitation: State of the Art III, Amsterdam; 2004-04-19 - 2004-04-21; in: "Journal of Rehabilitation Research & Development", Journal of Rehabilitation Research & Development JRRD, 41 (2004), ISSN: 0748-7711; 31.

  80. Authors: Margit Gföhler, E307-3; Arthur van Soest; Richard Casius
    Other persons involved: John Middleton; Nigel Shrive; M Jones

    M. Gföhler, AJK van Soest, R Casius:
    "Influence of muscle strength and pedal position on the performance of paraplegic cycling with released ankle joint";
    Talk: Computer Methods in Biomechanics and Biomechanical Engineering, Madrid; 2004-02-25 - 2004-02-28; in: "Computer Methods in Biomechanics & Biomedical Engineering - 5", J. Middleton, N.G. Shrive, M.L. Jones (ed.); FIRST Numerics Ltd, (2004), 6 pages.

  81. Authors: Margit Gföhler, E307-3; Johann Wassermann, E325-4; Tanja Kakebeeke; Helga Lechner; Werner Reichenfelser, E307-3; Thomas Angeli, E307-3
    Other persons involved: Peter Milburn; Barry Wilson; Toshimasa Yanai

    M. Gföhler, J. Wassermann, T. Kakebeeke, H. Lechner, W. Reichenfelser, T. Angeli:
    "Muscle behavior in artificially activated muscle - Measurements on neurologically intact and paraplegic subjects";
    Talk: International Society of Biomechanics XIXth Congress, Dunedin, NZ; 2003-07-06 - 2003-07-11; in: "Proceedings", P. Milburn, B. Wilson, T. Yanai (ed.); (2003), 5 pages.

  82. Authors: Christian Gierl-Mayer, E164-03-3; Erich Neuwirth; Matthias Müllner, E134-05; Jakob Reifeltshammer; Franz Rauscher, E307-6; Andreas Werner, E302-1

    C. Gierl-Mayer, E. Neuwirth, M. Müllner, J. Reifeltshammer, F. Rauscher, A. Werner:
    "Hydrogen Storage Alloy As Material Compound In Practice";
    Poster: WorldPM2016 Congress and Exhibition, Hamburg; 2016-10-09 - 2016-10-13; in: "Developing the Powder Metallurgy Future", European Powder Metallurgy Association, Shrewsbury UK (2016), ISBN: 978-1-899072-48-4; Paper ID 3296850, 6 pages.

  83. Authors: Bernhard Gmeiner, E307-3; Christoph Kumpf, E307-3; Norbert Barta, E307-3; Roman Talla, E307-3; Georg Adamcik, E307-3; Thomas Angeli, E307-3

    B. Gmeiner, C. Kumpf, N. Barta, R Talla, G. Adamcik, T. Angeli:
    "High-intensity resistance training on an isokinetic dynamometer for spaceflight";
    Poster: INTERNATIONAL Society for Gravitational Physiology. Annual Meeting (36; 2015; Ljubljana), Ljubljana; 2015-06-07 - 2015-06-12; in: "Book of abstracts / International Society for Gravitational Physiology, 36th Annual Meeting, June 7-12, 2015, Ljubljana, Slovenia ; Igor B. Mekjavic (ed). - Ljubljana: Studio print, 2015", 978-961-93848-0-0, (2015), 88.

  84. Author: Manfred Grafinger, E307-5
    Other person involved: VDI Wissensforum GmbH

    M. Grafinger:
    "Entwurf und Berechnung von Rotorprofilen mit der Profilsteigungsfunktion und dem Computerprogramm SV_Win";
    Talk: VDI Tagung, TU Dortmund (invited); 2010-10-05 - 2010-10-06; in: "Schraubenmaschinen 2010", VDI Wissensforum GmbH (ed.); VDI-Berichte, 2101 (2010), ISBN: 978-3-18-092101-3; 357 - 372.

    More information

  85. Authors: Manfred Grafinger, E307-5; Gernot Woitsch, TUW Racing Team

    M. Grafinger, G. Woitsch:
    "EDGE - Vom virtuellen Produkt zum realen Rennfahrzeug";
    Talk: SIMPEP 2009, Veitshöchheim bei Würzburg (invited); 2009-06-18 - 2009-06-19; in: "Kongress zur Simulation im Produktentstehungsprozess", (2009), 521 - 530.

    More information

  86. Authors: Manfred Grafinger, E307-5; Gernot Woitsch, TUW Racing Team; Michael Weigand, E307-3; Detlef Gerhard, E307-5

    M. Grafinger, G. Woitsch, M. Weigand, D. Gerhard:
    "EDGE - Vom virtuellen Produkt zum realen Rennfahrzeug";
    Talk: SIMPEP - Kongress zur Simulation im Produktentstehungsprozess, Würzburg; 2009-06-18 - 2009-06-19; in: "SIMPEP - Kongress zur Simulation im Produktentstehungsprozess", FVA - Forschungsvereinigung Antriebstechnik, Frankfurt am Main, Frankfurt am Main (2009), 521 - 552.

    More information

  87. Authors: Martin Grösel, E307; Rr Zsoldos; Alexander Kotschwar; Margit Gföhler, E307-3; Tf Licka; Christian Peham

    M. Grösel, Rr Zsoldos, A Kotschwar, M. Gföhler, Tf Licka, C. Peham:
    "Validation of a biomechanical model of the equine back using three different skin marker sets for Inverse Kinematics";
    Talk: 6th World Congress of Biomechanics (WCB 2010), Singapore; 2010-08-01 - 2010-08-10; in: "6th World Congress of Biomechanics", Springer, (2010), ISBN: 978-3-642-14514-8; 205 - 206.

  88. Authors: Alexander Haber, E307-1; Martin Egger, E307-1; Seid Halilovic

    A. Haber, M. Egger, S. Halilovic:
    "Filling and empyting state of silos above discharge devices";
    Talk: MHCL 2017, Belgrad; 2017-10-04 - 2017-10-06; in: "MCHL 2017", (2017), 95 - 100.

  89. Authors: Alexander Haber, E307-1; Georg Kartnig, E307-1

    A. Haber, G. Kartnig:
    "Ansätze zur Berücksichtigung der zeit- und ortsabhängigen Eigenschaften von Festkörperbrücken in DEM-Simulationen";
    Poster: WGTL Tagung, Wien; 2018-09-26 - 2018-09-27; in: "Tagunsband zum 14. Fachkolloquium der Wissenschaftlichen Gesellschaft für Technische Logistik", (2018), 241 - 246.

  90. Authors: Reinhard Hainisch, E307-3; Margit Gföhler, E307-3; Zubayer Karim, E307-3; Marcus Pandy

    R. Hainisch, M. Gföhler, Z. Karim, MG Pandy:
    "Comparison Of Musculoskelettal Parameters In Healthy Children And Children With Cerebral Palsy";
    Talk: XIII International Symposium on Computer Simulation in Biomechanics - ISB Technical Group on Computer Simulation, Leuven, Belgium; 2011-06-30 - 2011-07-02; in: "TGCS Symposium 2011", (2011), 2 pages.

  91. Authors: Reinhard Hainisch, E307-3; Margit Gföhler, E307-3; Zubayer Karim, E307-3; Marcus Pandy

    R. Hainisch, M. Gföhler, Z. Karim, MG Pandy:
    "Method for the determination of musculotendon parameters in subject specific musculoskeletal models based on MRI‐data";
    Talk: EUROMECH Colloquium 511 on Biomechanics of Human Motion, Ponta Delgada, Azores, Portugal; 2011-03-09 - 2011-03-12; in: "Euromech Colloquium 511 - Biomechanic of Human Motion. New Frontiers of Multibody Techniques for Clinical Applications", (2011), 36.

    More information

  92. Authors: Reinhard Hainisch, E307-3; Margit Gföhler, E307-3; Andreas Kranzl; Marcus Pandy

    R. Hainisch, M. Gföhler, A. Kranzl, MG Pandy:
    "Pre- And Post Operative Muscle Function In Crouched Gait - A Case Study Using Mri-Based Musculoskeletal Models";
    Poster: " Proc. XXIV Congress of the International Society of Biomechanics ISB 2013, Natal, Brasilien; 2013-08-04 - 2013-08-09; in: "Proc. XXIV Congress of the International Society of Biomechanics ISB 2013", (2013), 2 pages.

  93. Authors: Reinhard Hainisch, E307-3; Margit Gföhler, E307-3; Marcus Pandy

    R. Hainisch, M. Gföhler, MG Pandy:
    "Computational Simulation of Muscle Function in Crouched Gait in Children with Spastic Cerebral Palsy";
    Talk: 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), University of Vienna; 2012-09-10 - 2012-09-14; in: "CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), September 10-14, 2012, Vienna, Austria", (2012), ISBN: 978-3-9502481-9-7; Paper ID 2809, 2 pages.

    More information

  94. Authors: Reinhard Hainisch, E307-3; Zubayer Karim, E307-3; Andreas Kranzl; Margit Gföhler, E307-3; Marcus Pandy

    R. Hainisch, Z. Karim, A. Kranzl, M. Gföhler, MG Pandy:
    "Joint Moments in Children with Cerebral Palsy based on Biomechanical Models";
    Talk: ESMAC 2011 Europ. Soc. of Gait Analysis for Adults & Children, Vienna; 2011-09-15 - 2011-09-17; in: "20th Annual Meeting of ESMAC", (2011), 44.

    More information

  95. Authors: Reinhard Hainisch, E307-3; Zubayer Karim, E307-3; Andreas Kranzl; Margit Gföhler, E307-3; Marcus Pandy

    R. Hainisch, Z. Karim, A. Kranzl, M. Gföhler, MG Pandy:
    "Modelling and analysis of muscle function in cerebral palsy gait";
    Talk: Iutam 2010 : Iutam Symposium On Human Movement Analysis And Simulation, Leuven, Belgium (invited); 2010-09-13 - 2010-09-15; in: "Iutam 2010 : Iutam Symposium On Human Movement Analysis And Simulation", (2010), ISBN: 978-94-6018-247-1; 3 pages.

  96. Authors: Reinhard Hainisch, E307-3; Zubayer Karim, E307-3; Andreas Kranzl; Margit Gföhler, E307-3; Marcus Pandy

    R. Hainisch, Z. Karim, A. Kranzl, M. Gföhler, MG Pandy:
    "Scaling Of Biomechanical Models: A Comparison Of Motion-Tracking Markers And Anatomical Landmarks From Mri";
    Talk: 9th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, CMBBE2010, Valencia, Spain (invited); 2010-02-24 - 2010-02-27; in: "9th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, CMBBE2010", Arup, Solihull, UK, (2010), ISBN: 978-0-9562121-3-9; 6 pages.

  97. Authors: Reinhard Hainisch, E307-3; Marcus Pandy; Margit Gföhler, E307-3

    R. Hainisch, MG Pandy, M. Gföhler:
    "Muscle function in crouched gait of children with cerebral palsy";
    Talk: 12th International Symposium on Comupter Methods in Biomechanics and Biomedical Engineering, CMBBE 2014, Amsterdam; 2014-10-13 - 2014-10-14; in: "CMBBE 2014", (2014), 2 pages.

  98. Authors: Michael Harasek, E166-02-2; Martin Elenkov, E307-3; Benjamin Lukitsch, E166-02-2; Paul Ecker, E166-02-2; Christoph Janeczek, E307-3; Margit Gföhler, E307-3

    M. Harasek, M. Elenkov, B. Lukitsch, P. Ecker, C. Janeczek, M. Gföhler:
    "Design of Control Strategies for the CO2 Removal from Blood with an Intracorporeal Membrane Device";
    Talk: BMEiCON 2018, Chaing Mai, Thailand; 2018-11-21 - 2018-11-24; in: "e-Proceedings", (2018), 4 pages.

  99. Authors: Georg Havlicek, E307-1; Georg Kartnig, E307-1

    G. Havlicek, G. Kartnig:
    "Ermittlung des Längsschlupfes eines angetriebenen Kranrades bei bombiertem Schienenkopf";
    Talk: WGTL Tagung, Graz; 2017-09-20 - 2017-09-21; in: "Tagungsband zum 13. Fachkolloquium der Wissenschaftlichen Gesellschaft für Technische Logistik", (2017), 25 - 33.

  100. Authors: Georg Havlicek, E307-1; Georg Kartnig, E307-1

    G. Havlicek, G. Kartnig:
    "Kombination von Eigenspannungen und betrieblichen Spannungen in einem Kranlaufrad";
    Talk: 14. Fachkolloquium der Wissenschaftlichen Gesellschaft für Technische Logistik, Wien; 2018-09-26 - 2018-09-27; in: "Tagunsband zum 14. Fachkolloquium der Wissenschaftlichen Gesellschaft für Technische Logistik", (2018), 9 - 18.

  101. Authors: Georg Havlicek, E307-1; Stefan Krenn; Georg Kartnig, E307-1

    G. Havlicek, S. Krenn, G. Kartnig:
    "Determination of the longitudinal creep of a driven crane wheel on a crowned rail";
    Talk: MHCL 2017, Belgrad; 2017-10-04 - 2017-10-06; in: "XXII International conference on material handling, constructions and logistics", (2017), 35 - 42.

  102. Authors: Markus Hinteregger, E307-3; Christoph Janeczek, E307-3; Alen Karabegovic, E307-3; Helmut Mad, E307-3; Harald Hackl, E307-3; Margit Gföhler, E307-3; Reinhard Willinger, E302-02; Werner Mohl, MedUni Wien

    M. Hinteregger, C. Janeczek, A. Karabegovic, H. Mad, H. Hackl, M. Gföhler, R. Willinger, W. Mohl:
    "First results in the development of a pneumatically driven temporary left ventricle assist device";
    Poster: 42nd Annual Meeting of the German Society for Cardiovascular and Thoracic Surgery, Freiburg im Breisgau; 2013-02-17 - 2013-02-20; in: "Thorac cardiovasc Surg 2013", Thieme, 61 (2013).

    More information

  103. Authors: Markus Hinteregger, E307-3; Christoph Janeczek, E307-3; Reinhard Willinger, E302-02; Helmut Mad, E307-3; Harald Hackl, E307-3; Werner Mohl, MedUni Wien; Margit Gföhler, E307-3

    M. Hinteregger, C. Janeczek, R. Willinger, H. Mad, H. Hackl, W. Mohl, M. Gföhler:
    "Development of a pneumatic driven left ventricular assistant device (LVAD) - preliminary results";
    Poster: " Proc. XXIV Congress of the International Society of Biomechanics ISB 2013, Natal, Brasilien; 2013-08-04 - 2013-08-09; in: "" Proc. XXIV Congress of the International Society of Biomechanics ISB 2013", (2013), Paper ID ps2-22k, 2 pages.

  104. Author: Klaus Hoffmann, E307-1

    K. Hoffmann:
    "Cooperation between Industry and Vienna University of Technology";
    Talk: IFME 2007 - The 2nd International Forum of Mechanical Engineering, Dornbirn (invited); 2007-11-29; in: "IFME 2007", (2007), 6 pages.

  105. Author: Klaus Hoffmann, E307-1

    K. Hoffmann:
    "Measurements and Simulation of Guiding Effects with Flat Belt Conveyors";
    Talk: XVII IMEKO WORLD CONGRESS Metrology in the 3rd Millenium, Dubrovnik; 2003-06-22 - 2003-06-27; in: "XVII IMEKO World Congress - Proceedings", (2003), ISBN: 953-7124-00-2; 1939 - 1942.

  106. Author: Klaus Hoffmann, E307-1

    K. Hoffmann:
    "Recent Developments in Cable-Drawn Urban Transport Systems";
    Keynote Lecture: XVIII International Conference on MATERIAL HANDLING, CONSTRUCTIONS AND LOGISTICS, Belgrad (invited); 2006-10-19 - 2006-10-20; in: "XVIII International Conference on MATERIAL HANDLING, CONSTRUCTIONS AND LOGISTICS", (2006), ISBN: 86-7083-571-1; 43 - 50.

  107. Author: Klaus Hoffmann, E307-1

    K. Hoffmann:
    "Recent investigations of Ropeway Oscillations caused by Cross-Wind and other Influences";
    Talk: MHCL 09, Belgrad; 2009-10-15 - 2009-10-16; in: "MHCL 09", (2009), ISBN: 978-86-7083-672-3; 12 pages.

  108. Author: Klaus Hoffmann, E307-1

    K. Hoffmann:
    "Ropecon - A New Long Distance Conveyor based on Ropeway Technology";
    Talk: The 5th International Conference for Conveying and Handling of Particulate Solids, Sorrento; 2006-08-27 - 2006-08-31; in: "The 5th International Conference for Conveying and Handling of Particulate Solids", (2006), 6 pages.

  109. Author: Klaus Hoffmann, E307-1

    K. Hoffmann:
    "Ropeways from their origins up to the 3rd millennium";
    Talk: XX Triennial International Conference MHCL 2012 Material Handling, Constructions and Logistics, Belgrad (invited); 2012-10-03 - 2012-10-05; in: "XX International Conference on "Material Handling, Constructions and Logistics"", (2012), ISBN: 978-86-7083-763-8; 13 - 24.

  110. Author: Klaus Hoffmann, E307-1

    K. Hoffmann:
    "Vienna University of Technology and the Bologna Process";
    Talk: IFME 2007 - The 2nd International Forum of Mechanical Engineering, Dornbirn (invited); 2007-11-29; in: "IFME 2007", (2007), 7 pages.

  111. Authors: Klaus Hoffmann, E307-1; Klaus Decker, E307-1

    K. Hoffmann, K. Decker:
    "Inaccuracies in measurement of contact stresses due to the measuring grid of a foil sensor";
    Talk: 1st International Conference on Sensing Technology, Palmerston North, New Zealand (invited); 2005-11-21 - 2005-11-23; in: "Proceedings of the First International Conference on Sensing Technology", (2005), ISBN: 0-473-10504-7; 696 - 699.

  112. Authors: Klaus Hoffmann, E307-1; Klaus Decker, E307-1

    K. Hoffmann, K. Decker:
    "Influence of the Measuring Grid of a Foil Sensor on the Accuracy of Pressure Measurements";
    Talk: 20th Danubia-Adria Symposium on Experimental Methods in Solid Mechanics, Györ; 2003-09-24 - 2003-09-27; in: "Abstracts of the 20th Danubia-Adria Symposium on Experimental Methods in Solid Mechanics", (2003), ISBN: 9639058203; 78 - 79.

  113. Authors: Klaus Hoffmann, E307-1; Klaus Decker, E307-1; Christoffer Pölz

    K. Hoffmann, K. Decker, Ch. Pölz:
    "Errors in Measurement of Contact Pressure affected by Calibration Method and Properties of Contacting Bodies";
    Poster: 23rd DANUBIA - ADRIA Symposium on Experimental Methods in Solid Mechanics, Podbanske - Zilina; 2006-09-26 - 2006-09-29; in: "23rd DANUBIA-ADRIA Symposium on Experimental Methods in Solid Mechanics", (2006), ISBN: 80-8070-589-5; 51 - 52.

  114. Authors: Klaus Hoffmann, E307-1; Thomas Gabmayer, E307-1; Klaus Decker, E307-1

    K. Hoffmann, T. Gabmayer, K. Decker:
    "Remote Control of Long-Term Measurements on Wind Turbines using Umts Technology";
    Talk: 27 th Danubia Adria Symposium on Advances in Experimental Mechanics, Wroclaw; 2010-09-22 - 2010-09-25; in: "27th Symposium on Advances in Experimental Mechanics", (2010), ISBN: 978-83-87982-59-1; 73 - 74.

  115. Authors: Klaus Hoffmann, E307-1; Thomas Gabmayer, E307-1; G. Huber

    K. Hoffmann, T. Gabmayer, G. Huber:
    "Measurement of oscillation effects on ropeways and chairlifts";
    Talk: 24th DANUBIA-ADRIA Symposium on Developments in Experimental Mechanics, Sibiu; 2007-09-19 - 2007-09-22; in: "24th DANUBIA-ADRIA Symposium on Developments in Experimental Mechanics", (2007), ISBN: 978-973-739-456-9; 15 - 16.

  116. Authors: Klaus Hoffmann, E307-1; Robert Liehl

    K. Hoffmann, R. Liehl:
    "Cable-drawn urban transport systems";
    Talk: 11th International Conference on Urban Transport and the Environment in the 21st Century, Algarve; 2005-04-12 - 2005-04-14; in: "Urban Transport XI", WIT Press, Southampton (2005), ISBN: 1-84564-008-x; 25 - 36.

  117. Authors: Klaus Hoffmann, E307-1; Robert Liehl

    K. Hoffmann, R. Liehl:
    "Measurement of Cross-Oscillation Effects at a Detachable Bicable Ropeway";
    Poster: 20th Danubia-Adria Symposium on Experimental Methods in Solid Mechanics, Györ; 2003-09-24 - 2003-09-27; in: "Abstracts of the 20th Danubia-Adria Symposium on Experimental Methods in Solid Mechanics", (2003), ISBN: 9639058203; 178 - 179.

  118. Authors: Klaus Hoffmann, E307-1; Robert Liehl; Gregor Maurer

    K. Hoffmann, R. Liehl, G. Maurer:
    "Mobile Measuring System for the Characterisation of the Crosswind Stability of Ropeways";
    Poster: 19th Danubia-Adria Symposium, Polanica Zdroj, Poland; 2002-09-25 - 2002-09-28; in: "Abstracts of 19th Danubia-Adria Symposium on Experimental Methods in Solid Mechanics", (2002), 90 - 91.

  119. Authors: Klaus Hoffmann, E307-1; Christoph Pillichshammer
    Other person involved: Peter Wypych

    K. Hoffmann, C. Pillichshammer:
    "Comparison of a New Belt Conveyor (Ropecon) and the Conventional Type";
    Talk: 8th International Conference on Bulk Materials Storage, Handling and Transportation, Wollongong, Australia (invited); 2004-07-05 - 2004-07-08; in: "Proceedings of 8th International Conference on Bulk Materials Storage, Handling and Transportation", P. Wypych (ed.); (2004), ISBN: 0858257955; 268 - 272.

  120. Authors: Klaus Hoffmann, E307-1; Christoph Pillichshammer

    K. Hoffmann, C. Pillichshammer:
    "Investigations on Discharge Screw Conveyors";
    Talk: 6th international Conference for Conveying and Handling of Particulate Solids, Brisbane; 2009-08-03 - 2009-08-07; in: "Proceedings of CHoPS +ICBMH f", Engineers Australia, Australia (2009), ISBN: 978-0858259065; 354 - 359.

  121. Authors: Klaus Hoffmann, E307-1; Anton Pirko, E307-1; Hans-Christian Grosz
    Other persons involved: Stjepan Jecic; Damir Semenski

    K. Hoffmann, A. Pirko, H. Grosz:
    "Enhancement of Belt Conveyer Test Stand";
    Talk: 21st Danubia-Adria Symposium on Experimental Methods in Solid Mechanics, Brijuni/Pula, Croatia (invited); 2004-09-29 - 2004-10-02; in: "Abstracts of 21st Danubia-Adria Symposium on Experimental Methods in Solid Mechanics", S. Jecic, D. Semenski (ed.); (2004), ISBN: 953-96243-6-3; 84 - 85.

  122. Authors: Klaus Hoffmann, E307-1; Nenad Zrnic

    K. Hoffmann, N. Zrnic:
    "A Contribution on the History of Ropeways";
    Talk: International Symposium on the History of Machines and Mechanisms 2012, Amsterdam; 2012-05-07 - 2012-05-11; in: "Explorations in the History of Machines and Mechanisms", Springer, 15 (2012), ISBN: 978-94-007-4131-7; 381 - 394.

  123. Authors: Maria Huber, E307-2; Rainer Pamminger, E307-2; Wolfgang Wimmer, E307-2

    M. Huber, R. Pamminger, W. Wimmer:
    "Ecodesign in a life cycle perspective, Waste prevention of products - a question of design and consumer patterns";
    Poster: 2nd Boku Waste Conference, Universität für Bodenkultur, Wien; 2007-04-17 - 2007-04-19; in: "Waste matters. Integrating views", Facultas.wuv, Wien (2007), ISBN: 978-3-7089-0060-5; 315 - 324.

    More information

  124. Authors: Maria Huber, E307-2; Rainer Pamminger, E307-2; Wolfgang Wimmer, E307-2

    M. Huber, R. Pamminger, W. Wimmer:
    "ECODESIGN Toolbox for the Development of Green Product Concepts - Applied examples from industry";
    Talk: 2nd International Conference ECO-X Sustainable Recycling Management & Recycling Network Centrope, Tech Gate, Wien; 2007-05-09 - 2007-05-11; in: "Proceedings of ECO-X 2007", Wien (2007), ISBN: 978-3-200-00920-2; 253 - 262.

    More information

  125. Authors: Maria Huber, E307-2; Wolfgang Wimmer, E307-2
    Other person involved: Alfred Teischinger

    M. Huber, W. Wimmer:
    "Internet data base presenting material characteristics as basis for optimized and sustainable use of Austrian large dimensioned softwood";
    Poster: Lignovisionen - Proceedings of the COST Action E40 Conference, Biel; 2005-12-05 - 2005-12-06; in: "Lignovisionen - Proceedings of the COST Action E40 Conference", A. Teischinger (ed.); 13 (2006), ISSN: 1681-2808; 83 - 86.

  126. Authors: Christoph Janeczek, E307-3; Livia Futter, E307; Susanna Neudl, E165-01; Alen Karabegovic, E307-3; Roksana Suszek, E307-3; Michael Harasek, E166-02-2; Roman Ullrich; Claus G. Krenn; Margit Gföhler, E307-3

    C. Janeczek, L. Futter, S. Neudl, A. Karabegovic, R. Suszek, M. Harasek, R. Ullrich, C. Krenn, M. Gföhler:
    "Test circuit for quantification of gas exchange between blood and a sweep fluid in an intravascular membrane catheter";
    Poster: The 14th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Tel Aviv; 2016-09-20 - 2016-09-22; in: "CMBBE2016 book of abstracts", (2016).

  127. Authors: Christoph Janeczek, E307-3; Margit Gföhler, E307-3; Michael Harasek, E166-02-2; Werner Mohl, Med Uni Wien

    C. Janeczek, M. Gföhler, M. Harasek, W. Mohl:
    "Evaluation of Hemolysis Caused by a Miniature Heart Catheter Pump";
    Talk: BMEiCON 2018, Chaing Mai, Thailand; 2018-11-21 - 2018-11-24; in: "e-Proceedings", (2018), 5 pages.

  128. Authors: Christoph Janeczek, E307-3; Markus Hinteregger, E307-3; Alen Karabegovic, E307-3; Reinhard Willinger, E302-02; Werner Mohl, MedUni Wien; Vincenzo Soragnese, MedUni Wien; Margit Gföhler, E307-3

    C. Janeczek, M. Hinteregger, A. Karabegovic, R. Willinger, W. Mohl, V. Soragnese, M. Gföhler:
    "Minimally Invasive, Pneumatically Operated Left Ventricular Assist Device - Design And First In-Vitro Results";
    Poster: 21st Congresss of the European Society of Biomechanics (ESB 2015), Prague (invited); 2015-07-05 - 2015-07-08; in: "21st Congress of the European Society of Biomechanics", (2015).

  129. Authors: Christoph Janeczek, E307-3; Alen Karabegovic, E307-3; Markus Hinteregger, E307-3; Reinhard Willinger, E302-02; Margit Gföhler, E307-3

    C. Janeczek, A. Karabegovic, M. Hinteregger, R. Willinger, M. Gföhler:
    "Static And Dynamic Characteristics Of A Minimally Invasive Heart Catheter Pump";
    Poster: XLIII Annual ESAO Congress, Warschau; 2016-09-14 - 2016-09-17; in: "Int J Artif Organs", Wichtig Publishing, 39(7):358 (2016), ISSN: 0391-3988; 360.

  130. Authors: Christoph Janeczek, E307-3; Benjamin Lukitsch, E166-02-2; Florentine Huber-Dangl, E307-3; Alen Karabegovic, E307-3; Christian Jordan, E166-02-2; Bahram Haddadi, E166-02-2; Roman Ullrich; Claus G. Krenn; Margit Gföhler, E307-3; Michael Harasek, E166-02-2

    C. Janeczek, B. Lukitsch, F. Huber-Dangl, A. Karabegovic, C. Jordan, B. Haddadi, R. Ullrich, C. Krenn, M. Gföhler, M. Harasek:
    "Basic Performance Tests of the MILL Intravascular CO2 Removal Catheter";
    Talk: 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 18, Honolulu; 2018-07-17 - 2018-07-21; in: "2018 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC)", IEEE Engineering in Medicine and Biology Society, 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) (2018), ISSN: 1558-4615; Paper ID 18227008, 4 pages.

  131. Authors: Jutta Jerlich, E061; Hesamedin Ostad Ahmad Ghorabi, E307-2; Franz Reichl, E061-02
    Other persons involved: Lazlo Szentirmai; Tibor Gyula Szarka

    Jutta Jerlich, H. Ostad Ahmad Ghorabi, F. Reichl:
    "Ecodesign Education - A value-based approach for sustainable product development as an answer to upcoming global challenges";
    Talk: SEFI and IGIP Joint Annual Conference 2007, Miskolc, Ungarn; 2007-07-01 - 2007-07-04; in: "Joining Forces in Engineering Education towards Excellence", L. Szentirmai, T. Szarka (ed.); University of Miskolc, (2007), ISBN: 978-963-661-772-1; 99 - 104.

    More information

  132. Authors: Peter Judmaier, E307-2; Maria Huber, E307-2; Margit Pohl, E193-05; Markus Rester, E193-05; Daniela Leopold, University of Vienna

    P. Judmaier, M. Huber, M. Pohl, M. Rester, D. Leopold:
    "Sustainable Living - A Multiplayer Educational Game Based on Ecodesign";
    Talk: Engineering and Product Design Education International Conference, Barcelona, Spain; 2008-09-04 - 2008-09-05; in: "New Perspectives in Design Education - Proc. 10th Intl. Conf. on Engineering and Product Design Education", (2008), 1-904670-03-02; 734 - 740.

    More information

  133. Authors: Alen Karabegovic, E307-3; Harald Hackl, E307-3; Markus Hinteregger, E307-3; Christoph Janeczek, E307-3; Werner Mohl, MedUni Wien; Margit Gföhler, E307-3

    A. Karabegovic, H. Hackl, M. Hinteregger, C. Janeczek, W. Mohl, M. Gföhler:
    "Development of a Mock Circulation for In-Vitro Testing of a Left Ventricular Assist Device - Preliminary Results";
    Talk: Automed 2013, Dresden; 2013-10-09 - 2013-10-11; in: "Automed 2013", (2013), ISBN: 978-3-943356-82-3; 32 - 33.

  134. Authors: Alen Karabegovic, E307-3; Markus Hinteregger, E307-3; Christoph Janeczek, E307-3; Werner Reichenfelser, E307-3; Margit Gföhler, E307-3
    Other person involved: Alen Karabegovic, E307-3

    A. Karabegovic, M. Hinteregger, C. Janeczek, W. Reichenfelser, M. Gföhler:
    "A Systemic Mock Circulation for In-Vitro Testing of a Pneumatically Operated Left Ventricular Assist Device";
    Talk: 19th IFAC World Congress, Cape Town, South Africa; 2014-08-24 - 2014-08-29; in: "Proceedings of the 19th IFAC World Congress, 2014", A. Karabegovic (ed.); (2014), ISBN: 978-3-902823-62-5; 8409 - 8414.

    More information

  135. Authors: Alen Karabegovic, E307-3; Christoph Janeczek, E307-3; Markus Hinteregger, E307-3; Margit Gföhler, E307-3

    A. Karabegovic, C. Janeczek, M. Hinteregger, M. Gföhler:
    "Results Of In-Vitro Tests On A 1:1 Prototype Of A Percutaneous Ventricular Assist Device";
    Poster: XLIII Annual ESAO Congress, Warsaw; 2016-09-14 - 2016-09-17; in: "The International Journal of Artificial Organs", Int J Artif Organs, Wichtig Publishing, 39(7):358 (2016), ISSN: 0391-3988; 360.

  136. Authors: Alen Karabegovic, E307-3; Christoph Janeczek, E307-3; Markus Hinteregger, E307-3; Margit Gföhler, E307-3

    A. Karabegovic, C. Janeczek, M. Hinteregger, M. Gföhler:
    "Results of in-vitro tests on a 2:1 prototype of a percutaneous ventricular assist device";
    Talk: The 14th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Tel Aviv; 2016-09-20 - 2016-09-22; in: "CMBBE2016 book of abstracts", (2016).

    More information

  137. Authors: Alen Karabegovic, E307-3; Benjamin Lukitsch, E166-02-2; Christoph Janeczek, E307-3; Florentine Huber-Dangl, E307-3; Paul Ecker, E166-02-2; Michael Harasek, E166-02-2; Margit Gföhler, E307-3

    A. Karabegovic, B. Lukitsch, C. Janeczek, F. Huber-Dangl, P. Ecker, M. Harasek, M. Gföhler:
    "Problem of Controlling Blood Flow through an Intravascular Membrane Catheter";
    Poster: 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 18, Honolulu; 2018-07-17 - 2018-07-21; in: "2018 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC)", (2018).

  138. Authors: Zubayer Karim, E307-3; Reinhard Hainisch, E307-3; Andreas Kranzl; Margit Gföhler, E307-3; Marcus Pandy
    Other persons involved: Vander Sloten; Verdonck; Nyssen; Haueisen

    Z. Karim, R. Hainisch, A. Kranzl, M. Gföhler, MG Pandy:
    "Comparing the biomechanics of crouch gait in children with cerebral palsy to that of age-matched controls and young healthy adults";
    Talk: 4th european congress for medical and biomedical engineering 2008, antwerp, belgium; 2008-11-23 - 2008-11-27; in: "IFMBE Proceedings Vol 22", Vander Sloten, Verdonck, Nyssen, Haueisen (ed.); Springer Verlag, 22 (2008), ISSN: 1680-0737; Paper ID 1332, 4 pages.

  139. Authors: Zubayer Karim, E307-3; Reinhard Hainisch, E307-3; Christoph Stingeder, E307-3; Andreas Kranzl; Margit Gföhler, E307-3; Marcus Pandy
    Other persons involved: Duarte Araújo; Jan Cabri; Joao Barreiros

    Z. Karim, R. Hainisch, C Stingeder, A. Kranzl, M. Gföhler, MG Pandy:
    "Lower-Limb Muscle Architecture in Children with Cerebral Palsy";
    Talk: EWOMS 2009, Lisboa; 2009-06-04 - 2009-06-06; in: "EWOMS 2009", D. Araújo, J. Cabri, J. Barreiros (ed.); (2009), ISBN: 9789727351640; 70 pages.

  140. Authors: Zubayer Karim, E307-3; Andreas Kranzl; Margit Gföhler, E307-3; Marcus Pandy
    Other persons involved: Bernhard Schrefler; Umberto Perego

    Z. Karim, A. Kranzl, M. Gföhler, MG Pandy:
    "Biomechanics of a crouched gait caused by spastic cerebral palsy in children";
    Talk: 5th european congress on computational methods in applied sciences and engineering, venice, italy (invited); 2008-06-30 - 2008-07-04; in: "Wccm8 Eccomas 2008", B. Schrefler, U. Perego (ed.); CIMNE, (2008), Paper ID a2603, 2 pages.

  141. Authors: Jakob Karner, E307-3; Werner Reichenfelser, E307-3; Margit Gföhler, E307-3

    J Karner, W. Reichenfelser, M. Gföhler:
    "Estimation of Requirements for an Upper Extremity Support Using Inverse Dynamics and Motion Analysis";
    Talk: ESMAC 2011 Europ. Soc. of Gait Analysis for Adults & Children, Vienna; 2011-09-15 - 2011-09-17; in: "Proceedings of the 20th Annual Meeting of the European Society of Movement Analysis for Adults and Children", (2011), 3 - 4.

    More information

  142. Authors: Jakob Karner, E307-3; Werner Reichenfelser, E307-3; Margit Gföhler, E307-3

    J Karner, W. Reichenfelser, M. Gföhler:
    "Kinematic and Kinetic Analysis of Human Motion as Design Input for an Upper Extremity Bracing System";
    Talk: Biomedical Engineering (BioMed 2012), Innsbruck; 2012-02-15 - 2012-02-17; in: "Proceedings of the IASTED International Conference", ACTA Press Proceedings, Doi: 10.2316/p.2012.764-105 (2012), Paper ID 764-105, 8 pages.

    More information

  143. Author: Georg Kartnig, E307-1

    G. Kartnig:
    "Methods and trends in the field of Technical Logistics";
    Talk: MHCL 09, Belgrad; 2009-10-15 - 2009-10-16; in: "MHCL 09", (2009), ISBN: 978-86-7083-672-3; 10 pages.

  144. Authors: Georg Kartnig, E307-1; Klaus Decker, E307-1

    G. Kartnig, K. Decker:
    "Calculation of drive pulleys for belt conveyors";
    Talk: MHCL 09, Belgrad; 2009-10-15 - 2009-10-16; in: "MHCL 09", (2009), ISBN: 978-86-7083-672-3; 5 pages.

  145. Authors: Georg Kartnig, E307-1; Klaus Decker, E307-1; Georg Havlicek, E307-1

    G. Kartnig, K. Decker, G. Havlicek:
    "Studies on the discharging process of a bucket elevator of a testing plant using the discrete element method (DEM)";
    Talk: XX Triennial International Conference MHCL 2012 Material Handling, Constructions and Logistics, Belgrad; 2012-10-03 - 2012-10-05; in: "XX International Conference on "Material Handling, Constructions and Logistics"", (2012), ISBN: 978-86-7083-763-8; 55 - 60.

  146. Authors: Georg Kartnig, E307-1; Michael Eder, E307-1

    G. Kartnig, M. Eder:
    "Spielzeitberechnung von Shuttle-Systemen";
    Talk: 24. Deutscher Materialfluss-Kongress, München; 2015-03-26 - 2015-03-27; in: "24. Deutscher Materialfluss-Kongress", VDI Verlag GmbH, Düsseldorf (2015), ISBN: 978-3-18-092234-8; 203 - 212.

  147. Authors: Georg Kartnig, E307-1; Bruno Grösel, E307-1; Nenad Zrnic

    G. Kartnig, B. Grösel, N. Zrnic:
    "Past, state of the art and future of intralogistics";
    Talk: XX Triennial International Conference MHCL 2012 Material Handling, Constructions and Logistics, Belgrad (invited); 2012-10-03 - 2012-10-05; in: "XX International Conference on "Material Handling, Constructions and Logistics"", (2012), ISBN: 978-86-7083-763-8; 401 - 408.

  148. Authors: Georg Kartnig, E307-1; Jörg Oser
    Other person involved: Mark Hanna

    G. Kartnig, J. Oser:
    "System Design and Operation of a Small Size Container Terminal";
    Talk: 20th Annual Conference of the Production and Operations Management Society, Orlando; 2009-05-01 - 2009-05-04; in: "POM 2009", M. Hanna (ed.); (2009), 17 pages.

  149. Authors: Georg Kartnig, E307-1; Jörg Oser

    G. Kartnig, J. Oser:
    "Throughput Analysis of S/R Shuttle Systems";
    Talk: IMHRC 2014, Cincinnati; 2014-06-23 - 2014-06-27; in: "International Material Handling Research Colloquium 2014", (2014), 978-1-882780-18-3; 1 - 20.

  150. Authors: Christian Klauer; Thomas Schauer; Jakob Karner, E307-3; Werner Reichenfelser, E307-3; Emilia Ambrosini; Simona Ferrante; Jörg Raisch

    C. Klauer, T. Schauer, J Karner, W. Reichenfelser, E. Ambrosini, S. Ferrante, J. Raisch:
    "Design of feedback control strategies for an arm neuroprothesis combined with an exoskeleton.";
    Talk: ICNR 2012, Toledo; 2012-11-14 - 2012-11-16; in: "Converging Clinical and Engineering Reseach on Neurorehabilitation - Part II", Springer, Part II (2012), 1189 - 1193.

    More information

  151. Authors: Martin Kozek, E325-5; Walter Struckl, E307-2
    Other person involved: Norbert Ostermann, E230-02

    M. Kozek, W. Struckl:
    "EcoTram - Energieeffizienz und thermischer Komfort in Straßenbahnen";
    Talk: 12. Wiener Eisenbahnkolloquium, Wien (invited); 2014-03-13 - 2014-03-14; in: "Technisch-wirtschaftliche Optimierungspotentiale für den Nahverkehr", N. Ostermann (ed.); OVE-Schriftenreihe, Band 74 (2014), ISBN: 978-3-85133-080-9; 135 - 141.

    More information

  152. Author: Peter Kral, E307-3

    P. Kral:
    "Influence of Constructional Parameters Of Small Reciprocating Compressors on Sound Power Emissions";
    Poster: Acoustics 08, Paris; 2008-06-29 - 2008-07-04; in: "Proceedings of the Acoustics 08 Paris", (2008), ISBN: 978-2-9521105-7-0; Paper ID 190, 6 pages.

  153. Author: Peter Kral, E307-3

    P. Kral:
    "Measurement and Analysis of Sound Power radiated by small reciprocating compressors considering operating conditions and further influencing factors";
    Talk: 5th European Conference on Noise Control, Naples, Italy; 2003-05-19 - 2003-05-21; in: "Proceedings of the 5th European Conference on Noise Control", (2003), ISBN: 88-88942-00-9; 184/1 - 184/6.

  154. Author: Peter Kral, E307-3

    P. Kral:
    "On Sound Power Emission Of Small Reciprocating Compressors";
    Poster: Forum Acusticum, Budapest; 2005-08-29 - 2005-09-02; in: "Proceedings of the Forum Acusticum Budapest", OPAKFI Tudomanyos Egyesület, (2005), ISBN: 9638241683; Paper ID 4860, 6 pages.

  155. Author: Peter Kral, E307-3

    P. Kral:
    "Resulting Noise Emissions of Reciprocating Compressors by varying Valve Design Parameters";
    Poster: 6th European Conference on Noise Control, EURONOISE 2006, Tampere, Finnland; 2006-05-30 - 2006-06-01; in: "Proceedings of the 6th European Conference on Noise Control", (2006), Paper ID ss33-255, 6 pages.

  156. Authors: Peter Kral, E307-3; Harald Hackl, E307-3

    P. Kral, H. Hackl:
    "Determination of Sound caused by Compressor Valves using Time Signal Analysis";
    Poster: XVII IMEKO WORLD CONGRESS Metrology in the 3rd Millenium, Dubrovnik, Croatia; 2003-06-22 - 2003-06-27; in: "Proceedings of the 17th IMEKO World Congress, Metrology in the 3rd Millenium", International Measurement Confederation, (2003), ISBN: 953-7124-00-2; 1 - 4.

  157. Authors: Peter Kral, E307-3; Stefan Pausch

    P. Kral, S. Pausch:
    "An advanced statistical model to describe the contact between rough surfaces";
    Talk: 10th Nordic Symposium on Tribology, Stockholm; 2002-06-09 - 2002-06-12; in: "Proceedings of the 10th Nordic Symposium on Tribology", Royal Institute of Technology, Keynotes and Abstracts, inkl. CD-ROM (10 Seiten) (2002), 126.

  158. Authors: Peter Kral, E307-3; Stefan Pausch

    P. Kral, S. Pausch:
    "Comparison of empirical methods and measurements for determination of wear";
    Talk: 3rd AIMETA International Tribology Conference, Salerno; 2002-09-18 - 2002-09-20; in: "Proceedings of the 3rd AIMETA International Tribology Conference", University of Salerno, Abstracts of Papers, inkl. CD-ROM (10 Seiten) (2002), 16.

  159. Authors: Peter Kral, E307-3; Stefan Pausch
    Other person involved: Wilfried J. Bartz

    P. Kral, S. Pausch:
    "Ein Verschleißmodell für Schneckengetriebe";
    Talk: 13.Int.Colloquium Tribology d. Techn. Akademie Esslingen, Esslingen; 2002-01-15 - 2002-01-17; in: "Proceedings of the 13th International Colloquium Tribology, Lubricants, Materials and Lubrication Engineering", W.J. Bartz (ed.); Technische Akademie Esslingen, Volume I (2002), ISBN: 3-924813-48-5; 449 - 457.

  160. Authors: Florian Krautzer, E307; Rainer Pamminger, E307-2; Carl Diver, CDAMC; Wolfgang Wimmer, E307-2

    F. Krautzer, R. Pamminger, C. Diver, W. Wimmer:
    "Assessing the environmental performance of machine tools - Case studies applying the `LCA to go´ Webtool";
    Talk: 22nd CIRP Conference on Life Cycle Engineering 2015, Sydney; 2015-04-07 - 2015-04-09; in: "22nd CIRP Conference on Life Cycle Engineering 2015", Elsevier Procedia, Procedia CIRP Volume 29 (2015), ISBN: 9781510804593; 502 - 508.

    More information

  161. Authors: Martin Kuchler, E307-3; Margit Gföhler, E307-3

    M. Kuchler, M. Gföhler:
    "A biomechanical model to simulate the human movement on a rowing ergometer - The inverse dynamic problem for the lower extremity";
    Poster: 2nd European Medical and Biological Engineering Conference - EMBEC, Vienna, Austria; 2002-12-04 - 2002-12-08; in: "IFMBE Proceedings of the 2nd European Medical and Biological Engineering Conference", (2002), 276 - 277.

  162. Authors: Martin Kuchler, E307-3; Margit Gföhler, E307-3

    M. Kuchler, M. Gföhler:
    "Development of a biomechanical model of the human body including the upper and the lower extremities used to simulate the motion on a rowing ergometer - The inverse dynamic problem";
    Poster: International Society of Biomechanics XIXth Congress, Dunedin, New Zealand; 2003-07-06 - 2003-07-11; in: "Congress Handbook and Book of Abstracts of the International Society of Biomechanics XIXth Congress - The Human Body in Motion, including long abstract on CD-ROM - Abstracts and Proceedings, 4 pages", (2003), 122.

  163. Authors: Martin Kuchler, E307-3; Margit Gföhler, E307-3

    M. Kuchler, M. Gföhler:
    "Development of an FES rowing machine - numerical simulation and design";
    Talk: Fifth World Congress of Biomechanics, München; 2006-07-29 - 2006-08-04; in: "Journal of Biomechanics, Abstracts of the 5th World Congress of Biomechanics", Elsevier, 39/1 (2006), ISSN: 0021-9290; 183 - 184.

  164. Authors: Barbara Lechner, TU Wien; Oliver Majcher, TU Wien; Hesamedin Ostad Ahmad Ghorabi, E307-2; Daniel Collado-Ruiz, TU Valencia
    Other persons involved: Hans Kaiser; Raimund Kirner, E191-01

    B. Lechner, O. Majcher, H. Ostad Ahmad Ghorabi, D. Collado-Ruiz:
    "The Evolution of Aspects and Tendencies in Sustainable Development in European Planning and Urbansim";
    Poster: Junior Scientist Conference 2010, Vienna University of Technology; 2010-04-07 - 2010-04-09; in: "Proceedings of the Junior Scientist Conference 2010", H. Kaiser, R. Kirner (ed.); (2010), ISBN: 978-3-200-01797-9; 435 - 436.

    More information

  165. Authors: Robert Liehl; Klaus Hoffmann, E307-1
    Other persons involved: Stjepan Jecic; Damir Semenski

    R. Liehl, K. Hoffmann:
    "Additional Analysis of Cross Oscillation Effects at Ropeways during calm Wind Conditions";
    Talk: 21st Danubia-Adria Symposium on Experimental Methods in Solid Mechanics, Brijuni/Pula, Croatia (invited); 2004-09-29 - 2004-10-02; in: "Abstracts of 21st Danubia-Adria Symposium on Experimental Methods in Solid Mechanics", S. Jecic, D. Semenski (ed.); (2004), ISBN: 953-96243-6-3; 10 - 11.

  166. Authors: Robert Liehl; Klaus Hoffmann, E307-1

    R. Liehl, K. Hoffmann:
    "Measuring System for Characterisation of the Interaction between Crosswind and Gondola Inclination of Ropeways";
    Poster: XVII IMEKO WORLD CONGRESS Metrology in the 3rd Millenium, Dubrovnik; 2003-06-22 - 2003-06-27; in: "XVII IMEKO World Congress - Proceedings", (2003), ISBN: 953-7124-00-2; 1973 - 1976.

  167. Authors: Victor Lo; Wolfgang Wimmer, E307-2

    V. Lo, W. Wimmer:
    "Environmentally sound product improvements of consumer products";
    Talk: Proceedings of the DESIGN 2002, 7th International Design Conference, Cavtat - Dubrovnik - Croatia; 2002-05-14 - 2002-05-17; in: "Proceedings of the 7th International Design Conference DESIGN 2002", (2002), ISBN: 953-6313-47-9; 1339 - 1344.

    More information

  168. Authors: Christoph Makovec; Werner Reichenfelser, E307-3; Harald Hackl, E307-3; Margit Gföhler, E307-3

    Ch. Makovec, W. Reichenfelser, H. Hackl, M. Gföhler:
    "Wheelchair Exercise Device";
    Talk: TAR 2009, Berlin (invited); 2009-03-18 - 2009-03-19; in: "Proc. 2 nd European Conference for Technically Assisted Rehabilitation", (2009), ISSN: 1862-4871; 4 pages.

    More information

  169. Author: Thomas Mitterlehner, E307-01

    T. Mitterlehner:
    "DEM-Modellierung von Be- und Entladezyklen in Festbett-Wärmespeichern";
    Talk: solution day - "update" Logistikwerkstatt Graz 2019, Graz; 2019-05-22; in: "solution day - "update", Logistik Werkstatt Graz 2019", Verlag der Technischen Universität Graz, (2019), ISBN: 978-3-85125-673-4; 155 - 174.

  170. Author: Hesamedin Ostad Ahmad Ghorabi, E307-2
    Other person involved: Ali Sanayei

    H. Ostad Ahmad Ghorabi:
    "Ecodesign Strategies as a Basis for Green Development and Environmental Management in Organizations";
    Keynote Lecture: 1st International Conference on Industry Safety, Occupational Health and Safety in Organizations, Isfahan, Iran (invited); 2008-05-18 - 2008-05-19; in: "Proceedings of the 1st International Conference on Industry Safety, Occupational Health and Safety in Organizations", A. Sanayei (ed.); http://www.iransafety.org/ArticleList.php, (2008), 7 pages.

  171. Author: Hesamedin Ostad Ahmad Ghorabi, E307-2
    Other person involved: LCAinfo Schweiz

    H. Ostad Ahmad Ghorabi:
    "Firmennormen zu Ecodesign";
    Talk: 31st Discussion Forum on Life Cycle Assessment and Ecodesign, ETH, Zürich, Schweiz (invited); 2007-05-10; in: "31st Discussion Forum: Life Cycle Assessment and Ecodesign", LCAinfo Schweiz (ed.); www.lcainfo.ch/df (2007), 5 pages.

  172. Authors: Hesamedin Ostad Ahmad Ghorabi, E307-2; Mohammad Abed-Navandi
    Other person involved: Ali Sanayei

    H. Ostad Ahmad Ghorabi, M. Abed-Navandi:
    "Establishing a "Just Culture" for Work Safety and Environmental Protection";
    Talk: 1st International Conference on Industry Safety, Occupational Health and Safety in Organizations, Isfahan, Iran; 2008-05-18 - 2008-05-19; in: "Proceedings of the 1st International Conference on Industry Safety, Occupational health and Environment in Organizations", A. Sanayei (ed.); http://www.iransafety.org/ArticleList.php, (2008), 5 pages.

  173. Authors: Hesamedin Ostad Ahmad Ghorabi, E307-2; Niki Bey; Wolfgang Wimmer, E307-2
    Other person involved: Dorian Marjanovic

    H. Ostad Ahmad Ghorabi, N. Bey, W. Wimmer:
    "Parametric Ecodesign - An Integrative Approach for Implementing Ecodesign into Decisive Early Design stages";
    Talk: Design 2008 - 10th International Design Conference, Dubrovnik; 2008-05-19 - 2008-05-22; in: "Proceedings of the Design 2008 - 10th International Design Conference", D. Marjanovic (ed.); (2008), ISBN: 978-953-6313-89-1; 1327 - 1334.

    More information

  174. Authors: Hesamedin Ostad Ahmad Ghorabi, E307-2; Daniel Collado-Ruiz, TU Valencia; Wolfgang Wimmer, E307-2
    Other persons involved: Margareta Norell; Martin Grimheden; Philipp Skogstad

    H. Ostad Ahmad Ghorabi, D. Collado-Ruiz, W. Wimmer:
    "Towards Integrating LCA into CAD";
    Talk: 17th International Conference on Engineering Design, ICED09, Stanford, California, USA; 2009-08-24 - 2009-08-27; in: "Proceedings of the International Conference on Engineering Design", M. Norell, M. Grimheden, P. Skogstad (ed.); 7 (2009), ISBN: 9781904670117; 301 - 310.

    More information

  175. Authors: Hesamedin Ostad Ahmad Ghorabi, E307-2; Jutta Jerlich, E061
    Other person involved: Ali Sanayei

    H. Ostad Ahmad Ghorabi, Jutta Jerlich:
    "Value Based Life Cycle Analysis for Occupational, Environmental and Legal Compliance in Organizations";
    Poster: 1st International Conference on Industry Safety, Occupational Health and Safety in Organizations, Isfahan, Iran; 2008-05-18 - 2008-05-19; in: "Proceedings of the 1st International Conference on Industry Safety, Occupational Health and Environment in Organizations", A. Sanayei (ed.); http://www.iransafety.org/ArticleList.php, (2008), 4 pages.

  176. Authors: Hesamedin Ostad Ahmad Ghorabi, E307-2; Touba Rahmani, E307-5; Detlef Gerhard, E307-5
    Other person involved: Amaresh Chakrabarti

    H. Ostad Ahmad Ghorabi, T. Rahmani, D. Gerhard:
    "An Ontological Approach for the Integration of Life Cycle Assessment into Product Data Management Systems";
    Talk: 22nd CIRP Design Conference (CIRP Design 2012), Bangalore; 2012-03-28 - 2012-03-30; in: "Proceedings of the 22nd CIRP Design Conference (CIRP Design 2012)", A. Chakrabarti (ed.); Springer, (2012), ISBN: 978-1-4471-4506-6; 249 - 256.

    More information

  177. Authors: Hesamedin Ostad Ahmad Ghorabi, E307-2; Touba Rahmani, E307-5; Detlef Gerhard, E307-5

    H. Ostad Ahmad Ghorabi, T. Rahmani, D. Gerhard:
    "Implementing PDM Systems in Design Education to Enhance Design Collaboration";
    Talk: 14th INTERNATIONAL CONFERENCE ON ENGINEERING AND PRODUCT DESIGN EDUCATION E&PDE 2012, Antwerpen; 2012-09-06 - 2012-09-07; in: "Proceedings of E&PDE 2012", (2012), Paper ID 5153, 7 pages.

    More information

  178. Authors: Hesamedin Ostad Ahmad Ghorabi, E307-2; Touba Rahmani, E307-5; Detlef Gerhard, E307-5

    H. Ostad Ahmad Ghorabi, T. Rahmani, D. Gerhard:
    "Integrating LCA into PDM for Ecodesign";
    Talk: International Conference on Information and Knowledge Engineering (ICIKE 11), Singapore; 2011-09-28 - 2011-09-30; in: "World Academy of Science, Engineering and Technology", World Academy of Science, Engineering and Technology, Year 7, Issue 81, September 2011 (2011), ISSN: 2010-376x; 223 - 228.

    More information

  179. Authors: Hesamedin Ostad Ahmad Ghorabi, E307-2; Cosima Strasser, FUB
    Other person involved: Klaus Hug, Academia Engelberg

    H. Ostad Ahmad Ghorabi, C. Strasser:
    "Regional Energy Outlook for Europe";
    Talk: ACADEMIA ENGELBERG, Engelberg (invited); 2006-10-09 - 2006-10-11; in: "5th Dialogue on Science - Rethinking our Energy Future - Smart, Sustainable and Secure", K. Hug (ed.); (2006).

  180. Authors: Hesamedin Ostad Ahmad Ghorabi, E307-2; Wolfgang Wimmer, E307-2
    Other persons involved: Wilfried Elmenreich, E191-01; Hans Kaiser

    H. Ostad Ahmad Ghorabi, W. Wimmer:
    "Ecodesign Decision Boxes for Environmentally Sound Product Development";
    Poster: Junior Scientist Conference 2006, Wien; 2006-04-19 - 2006-04-21; in: "Proceedings of the Junior Scientist Conference 2006", W. Elmenreich, H. Kaiser (ed.); (2006), ISBN: 3-902463-05-8; 257 - 258.

    More information

  181. Authors: Hesamedin Ostad Ahmad Ghorabi, E307-2; Wolfgang Wimmer, E307-2; Niki Bey
    Other person involved: Dorian Marjanovic

    H. Ostad Ahmad Ghorabi, W. Wimmer, N. Bey:
    "ECODESIGN DECISION BOXES - A SYSTEMATIC TOOL FOR INTEGRATING ENVIRONMENTAL CONSIDERATIONS INTO PRODUCT DEVELOPMENT";
    Talk: DESIGN 2006, 9th International Design Conference, Dubrovnik; 2006-05-15 - 2006-05-18; in: "Proceedings of the 9th International Design Conference - DESIGN 2006", D. Marjanovic (ed.); (2006), ISBN: 953-6313-78-2; 1399 - 1404.

    More information

  182. Author: Rainer Pamminger, E307-2

    R. Pamminger:
    "Integration von Umweltaspekten in den Entwicklungsprozess von Straßenbahnen";
    Talk: II. Internationales Fachysmposium Moderne Straßenbahnsysteme, Berlin; 2010-03-25 - 2010-03-26; in: "Strassenbahn", Interdisziplinärer Forschungsverbund Bahntechnik e.V.,, Band 26/2010 (2010), ISBN: 978-3-940727-19-0; 91 - 101.

    More information

  183. Authors: Rainer Pamminger, E307-2; Adriana Diaz, ECODESIGN company; Wolfgang Wimmer, E307-2; Martin Hennig, E307-5
    Other person involved: Bernd Kopacek

    R. Pamminger, A. Diaz, W. Wimmer, M. Hennig:
    "ECODESIGN+ A webbased tool for assessing the carbon footprint of products";
    Poster: Going Green Care Innovation, Wien; 2014-11-17 - 2014-11-20; in: "Going Green Care Innovation - Proceedings", B. Kopacek (ed.); SAT, (2014), 1 pages.

    More information

  184. Authors: Rainer Pamminger, E307-2; Sandra Gottschall, E307-2; Wolfgang Wimmer, E307-2
    Other persons involved: Srichand Hinduja; Lin Li

    R. Pamminger, S. Gottschall, W. Wimmer:
    ""LCA to go" -Environmental Assessment of Machine Tools according to Requirements of Small and Medium-sized Enterprises (SMEs) - Development of the Methodological Concept";
    Talk: 37th International Matador Conference, Manchester; 2012-08-24 - 2012-08-27; in: "Proceedings of the 37th International MATADOR Conference", S. Hinduja, L. Li (ed.); Springer Verlag, (2012), ISBN: 978-1-4471-4479-3; 113 - 116.

    More information

  185. Authors: Rainer Pamminger, E307-2; Maria Huber, E307-2; Wolfgang Wimmer, E307-2

    R. Pamminger, M. Huber, W. Wimmer:
    "ECODESIGN Toolbox for the Development of Green Product Concepts - Case study digital voice recorder";
    Poster: 16th International Conference on Engineering Design, Paris (invited); 2007-08-28 - 2007-08-30; in: "Design for Society Knowledge, innovation and sustainability", (2007), ISBN: 1-904670-01-6; Paper ID 437, 10 pages.

    More information

  186. Authors: Rainer Pamminger, E307-2; Maria Huber, E307-2; Wolfgang Wimmer, E307-2

    R. Pamminger, M. Huber, W. Wimmer:
    "The Use of the Electric and Electronic Equipment-PILOT in the ECODESIGN Toolbox for the Development of Green Product Concepts";
    Talk: Ecology in Electronics, 4th Science & Technology Conference, Warsaw, Warschau (invited); 2006-06-05 - 2006-06-06; in: "PRACE - Przemyslawego Instytutu Elektroniki", (2006), ISSN: 0509-7053; 11 - 19.

    More information

  187. Authors: Rainer Pamminger, E307-2; Florian Krautzer, E307; Wolfgang Wimmer, E307-2; Karsten Schischke, Fraunhofer IZM

    R. Pamminger, F. Krautzer, W. Wimmer, K. Schischke:
    ""LCA to go" -Environmental Assessment of Machine Tools according to Requirements of Small and Medium-sized Enterprises (SMEs) - Development of the Methodological Concept";
    Talk: 20th CIRP International Conference on Life Cycle Engineering, Singapore; 2013-04-17 - 2013-04-19; in: "Re-engineering Manufacturing for Sustainability", Springer, Singapore (2013), ISBN: 978-981-4451-47-5; 481 - 486.

    More information

  188. Authors: Rainer Pamminger, E307-2; Stefan Kuso, E307-2; Wolfgang Wimmer, E307-2; Gerhard Podhradsky

    R. Pamminger, S. Kuso, W. Wimmer, G. Podhradsky:
    "Re-design of a Digital Voice Recorder to meet the needs of Circular Economy - Status Analysis";
    Talk: Electronics Goes Green 2016+, Berlin; 2016-09-07 - 2016-09-09; in: "Proceedings of International Congress Electronics Goes Green 2016+", (2016), ISBN: 978-3-00-053763-9; 1 - 10.

    More information

  189. Authors: Rainer Pamminger, E307-2; Wolfgang Wimmer, E307-2; Helmut Adamek, Bombardier

    R. Pamminger, W. Wimmer, H. Adamek:
    "Integration of environmental aspects into the product development process of Light Rail Vehicles";
    Talk: SETAC Europe Annual Meeting 2010, Seville; 2010-05-23 - 2010-05-27; in: "Abstract book SETAC Europe Annual Meeting 2010 Seville", SETAC Europe, (2010).

    More information

  190. Authors: Rainer Pamminger, E307-2; Wolfgang Wimmer, E307-2; Helmut Adamek, Bombardier

    R. Pamminger, W. Wimmer, H. Adamek:
    "Integration von Umweltaspekten in den Produktentwicklungsprozess von Straßenbahnen";
    Talk: 39. Tagung Moderne Schienenfahrzeuge, Technische Universität Graz; 2010-04-11 - 2010-04-14; in: "ZEVrail, Sonderheft Tagungsband, Moderne Schienenfahrzeuge", Georg Siemens Verlag GmbH & Co.KG, 39. Tagung Moderne Schienenfahrzeuge (2010), ISSN: 1618-8330; 150 - 156.

    More information

  191. Authors: Rainer Pamminger, E307-2; Wolfgang Wimmer, E307-2; Maria Huber, E307-2; Michael Bauer, Engel Austria GmbH
    Other person involved: VDI Wissensforum GmbH

    R. Pamminger, W. Wimmer, M. Huber, M. Bauer:
    "Die ökointelligente Spritzgießmaschine- Wettbewerbsvorteile durch umweltgerechte Produktentwicklung/ECODESIGN";
    Talk: VDI Tagung, Baden Baden, D; 2008-01-29 - 2008-01-30; in: "Spritzgie0en 2008 - Innovation und Produktivität", VDI Wissensforum GmbH (ed.); VDI Kunststofftechnik, (2008), ISBN: 978-3-18-234288-5; 13 - 25.

    More information

  192. Authors: Rainer Pamminger, E307-2; Wolfgang Wimmer, E307-2; Maria Huber, E307-2; Michael Bauer, Engel Austria GmbH

    R. Pamminger, W. Wimmer, M. Huber, M. Bauer:
    "ECODESIGN Toolbox for the Development of Green Product Concepts - Case study injection moulding machine";
    Talk: 5th International Symposium on Environmentally Conscious Design and Inverse Manufacturing, ECODESIGN 2007, Tokyo (invited); 2007-12-10 - 2007-12-12; in: "Integration of social system design, business strategies, and Technologies by the EcoDesign approach under the global energy crisis era", (2007), Paper ID B2-1-2F, 8 pages.

    More information

  193. Authors: Rainer Pamminger, E307-2; Wolfgang Wimmer, E307-2; Maria Huber, E307-2; Hesamedin Ostad Ahmad Ghorabi, E307-2

    R. Pamminger, W. Wimmer, M. Huber, H. Ostad Ahmad Ghorabi:
    "THE ECODESIGN TOOLBOX FOR THE DEVELOPMENT OF GREEN PRODUCT CONCEPTS - FIRST STEPS FOR PRODUCT IMPROVEMENT";
    Talk: Care Innovation 2006, Wien (invited); 2006-11-13 - 2006-11-16; in: "Going Green CARE INNOVATION 2006, Proceedings", Special Issue of IJAA, (2006).

  194. Authors: Marcus Pandy; Margit Gföhler, E307-3; Richard Baker
    Other persons involved: John Middleton; Nigel Shrive; M Jones

    MG Pandy, M. Gföhler, R Baker:
    "Contribution of Gait Determinants to the Pathway of the Center of Mass in Normal Walking";
    Talk: Computer Methods in Biomechanics and Biomechanical Engineering, Madrid; 2004-02-25 - 2004-02-28; in: "Computer Methods in Biomechanics & Biomedical Engineering - 5", J. Middleton, N.G. Shrive, M.L. Jones (ed.); FIRST Numerics Ltd, (2004), 6 pages.

  195. Authors: Pierre Paschinger, E307-3; Hanns Amri, E325-5; Katharina Hartentahler, E307-3; Michael Weigand, E307-3

    P. Paschinger, H. Amri, K. Hartentahler, M. Weigand:
    "Compound-Split Drivetrains For Rotorcraft";
    Talk: 43rd European Rotorcraft Forum 2017, Milan, Italy; 2017-09-12 - 2017-09-15; in: "43rd European Rotorcraft Forum 2017", (2017), ERF2017_58.

    More information

  196. Authors: Pierre Paschinger, E307-3; Michael Weigand, E307-3

    P. Paschinger, M. Weigand:
    "Simulation Of A Compound-Split Transmission For The Uh-60";
    Talk: 44th European Rotorcraft Forum, Delft; 2018-09-18 - 2018-09-20; in: "44th European rotorcraft Forum", (2018), 11 pages.

    More information

  197. Authors: Franz Paulischin; Georg Kartnig, E307-1

    F. Paulischin, G. Kartnig:
    "Das laterale Laufverhalten von Stahlprozessbändern - Erweiterung der Betrachtungen auf Bänder mit geringer Bandspannung";
    Talk: 14. Fachkolloquium der Wissenschaftlichen Gesellschaft für Technische Logistik, Wien; 2018-09-26 - 2018-09-27; in: "14. Fachkolloquium", (2018), 105 - 115.

  198. Authors: Anton Pirko, E307-1; Martin Egger; Klaus Hoffmann, E307-1

    A. Pirko, M. Egger, K. Hoffmann:
    "Flat Steel Belt Guiding Mechanism";
    Poster: 5th International Conference an Advanced Engineering Design, Prag; 2006-06-11 - 2006-06-14; in: "AED 2006 - Advanced Engineering Design", (2006), ISBN: 80-86059-44-8; 7 pages.

  199. Authors: Anton Pirko, E307-1; Klaus Hoffmann, E307-1

    A. Pirko, K. Hoffmann:
    "Measurements on Belt Conveyor Test Stand";
    Poster: 23rd DANUBIA - ADRIA Symposium on Experimental Methods in Solid Mechanics, Podbanske - Zilina; 2006-09-26 - 2006-09-29; in: "23rd DANUBIA - ADRIA Symposium on Experimental Methods in Solid Mechanics", (2006), ISBN: 80-8070-589-5; 53 - 54.

  200. Authors: Anton Pirko, E307-1; Klaus Hoffmann, E307-1

    A. Pirko, K. Hoffmann:
    "New Steering Concept of Belt Conveyor Test Stand";
    Poster: 22nd DANUBIA-ADRIA Symposium on Experimental Methods in Solid Mechanics, Parma; 2005-09-28 - 2005-10-01; in: "Proceedings of DAS-2005", (2005), ISBN: 3-9501554-3-0; Paper ID 119, 2 pages.

  201. Authors: Margit Pohl, E193-05; Markus Rester, E193-05; Peter Judmaier, E307-2; Daniela Leopold, University of Vienna

    M. Pohl, M. Rester, P. Judmaier, D. Leopold:
    "Designing Game Based Learning - a Participatory Approach";
    Talk: World Conference on Educational Multimedia, Hypermedia and Telecommunications (EDMEDIA), Vienna; 2008-06-30 - 2008-07-04; in: "Proceedings of World Conference on Educational Multimedia, Hypermedia and Telecommunications 2008", (2008), ISBN: 1-880094-62-2; 1317 - 1322.

    More information

  202. Authors: Markus Puchinger, E307-3; Nithin Babu Rajendra Kurup, E307-3; Margit Gföhler, E307-3

    M. Puchinger, N. Babu Rajendra Kurup, M. Gföhler:
    "A Novel Device for Manual Wheelchair Propulsion - first experimental results";
    Talk: 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and 3rd Conference on Imaging and Visualization, CMBBE 2018, Lisbon; 2018-03-26 - 2018-03-29; in: "15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering", (2018), 1 pages.

    More information

  203. Authors: Markus Puchinger, E307-3; Nithin Babu Rajendra Kurup, E307-3; Margit Gföhler, E307-3
    Other persons involved: Markus Puchinger, E307-3; Nithin Babu Rajendra Kurup, E307-3; Margit Gföhler, E307-3

    M. Puchinger, N. Babu Rajendra Kurup, M. Gföhler:
    "A Test Rig for Investigating Manual Wheelchair Propulsion Devices";
    Talk: Technically Assisted Rehabilitation 2017, Berlin; 2017-03-09 - 2017-03-10; in: "Current Directions in Biomedical Engineering", M. Puchinger, N. Babu Rajendra Kurup, M. Gföhler (ed.); De Gruyter, Current Directions in Biomedical Engineering - Abstracts - TAR-Conference 2017 - Berlin, March 9-10 (2017), ISSN: 1862-4871; 12.

    More information

  204. Authors: Markus Puchinger, E307-3; Nithin Babu Rajendra Kurup, E307-3; Margit Gföhler, E307-3

    M. Puchinger, N. Babu Rajendra Kurup, M. Gföhler:
    "Passive light-weight arm exoskeleton: possible applications";
    Talk: 4th International Conference on Neurorehabilitation 2018 (ICNR 2018), Pisa; 2018-10-16 - 2018-10-20; in: "Converging Clinical and Engineering Research on Neurorehabilitation III", Springer, (2018), 21 - 25.

    More information

  205. Authors: Markus Puchinger, E307-3; Nithin Babu Rajendra Kurup, E307-3; Margit Gföhler, E307-3

    M. Puchinger, N. Babu Rajendra Kurup, M. Gföhler:
    "Performance of a manual wheelchair propulsion device optimized for the musculoskeletal system of the upper limbs - preliminary results";
    Talk: 8th World Congress of Biomechanics, WCB 2018, Dublin; 2018-07-08 - 2018-07-12; in: "8th World Congress of Biomechanics", (2018), 1 pages.

    More information

  206. Authors: Markus Puchinger, E307-3; Nithin Babu Rajendra Kurup, E307-3; Thomas Keck, E307-3; Johannes Zajc, OBH; Michael Russold, OBH; Margit Gföhler, E307-3

    M. Puchinger, N. Babu Rajendra Kurup, T. Keck, J. Zajc, M. Russold, M. Gföhler:
    "The RETRAINER Light-Weight Arm Exoskeleton: Effect of Adjustable Gravity Compensation on Muscle Activations and Forces";
    Poster: 2018 7th IEEE International Conference on Biomedical Robotics and Biomechatronics (BIOROB), Enschede; 2018-08-26 - 2018-08-29; in: "2018 7th IEEE International Conference on Biomedical Robotics and Biomechatronics (Biorob)", (2018), 6 pages.

    More information

  207. Authors: Markus Puchinger, E307-3; Margit Gföhler, E307-3

    M. Puchinger, M. Gföhler et al.:
    "The ReTrainer arm exoskeleton - a modular lightweight device that combines adjustable gravity compensation, lockable joints and neuromuscular electrical stimulation.";
    Talk: 12th Vienna International Workshop on FES, Wien; 2016-09-08 - 2016-09-09; in: "12th Vienna International Workshop on FES", (2016), 11 - 14.

  208. Authors: John Rasmussen; Soren Christensen; Margit Gföhler, E307-3; Michael Damsgaard; Thomas Angeli, E307-3

    J Rasmussen, ST Christensen, M. Gföhler, M Damsgaard, T. Angeli:
    "AnyBody - Development of assistive devices by means of computer simulation";
    Talk: Nordic Assistive Technology Conference - Assistive Technology and Equal Opportunities, Copenhagen (invited); 2003 - 2003; in: "Nordic Assistive Technology Conference - Assistive Technology and Equal Opportunities", (2003).

  209. Author: Franz Rauscher, E307-6

    F. Rauscher:
    "Acoustic Emission during Fatigue Testing of Pressure Vessels";
    Talk: 27th European Conference on Acoustic Emission Testing, Cardiff, Wales, UK; 2006-09-20 - 2006-09-22; in: "Acoustic Emission Testing", Trans Tech Publications Ltd, (2006), ISBN: 0-87849-420-0; 147 - 152.

    More information

  210. Author: Franz Rauscher, E307-6
    Other person involved: DGZfP

    F. Rauscher:
    "Application of X22-Correlation to Some Types of Acoustic Emission Signals";
    Talk: 31st Conference of the European Working Group on Acoustic Emission (EWGAE), Dresden; 2014-09-03 - 2014-09-05; in: "31st Conference of the European Working Group on Acoustic Emission (EWGAE)", DGZfP (ed.); DGZfP-Proceedings BB 149 - CD / DGZfP, Dresden (2014), ISBN: 978-3-940283-63-4; Paper ID We.3.B.3, 9 pages.

    More information

  211. Author: Franz Rauscher, E307-6

    F. Rauscher:
    "Charakterisierung der Druckprüfung und der Schallemissionsuntersuchung im Vergleich zu anderen zerstörungsfreien Prüfungen";
    Talk: DACH Jahrestagung 2004, Berichtsband 89-CD, Salzburg; 2004-05-17 - 2004-05-19; in: "Jahrestagung 2004", (2004), ISBN: 3-931381-55-2.

    More information

  212. Author: Franz Rauscher, E307-6

    F. Rauscher:
    "Defect Detection by Acoustic Emission Examination of Metallic Pressure Vessels";
    Talk: 26th European Conference on Acoustic Emission Testing, Berlin, Germany; 2004-09-15 - 2004-09-17; in: "26th European Conference on Acoustic Emission Testing", Deutsche Gesellschaft für Zerstörungsfreie Prüfung e.V., Berichtsband 90, Band 1, Band 2 und CD (2004), ISBN: 3-931381-58-7; 83 - 90.

    More information

  213. Author: Franz Rauscher, E307-6

    F. Rauscher:
    "Design by Analysis: Direct Route for Cases with Pressure and Thermal Action";
    Talk: 11th International Conference on Pressure Vessel Technology-2006, Vancouver, Canada; 2006-07-23 - 2006-07-27; in: "CD", (2006), ISBN: 0-7918-3782-3.

    More information

  214. Author: Franz Rauscher, E307-6
    Other person involved: . ASME

    F. Rauscher:
    "Fatigue Design For Non-Welded Regions According To New European And American Pressure Vessel Standards";
    Talk: ASME 2009 Pressure Vessels and Piping Division Conference (PVP2009), Prague; 2009-07-26 - 2009-07-30; in: "ASME 2009 Pressure Vessels and Piping Division Conference (PVP2009)", .. ASME (ed.); ASME, Order No. 1821CD (2009), ISBN: 978-0-7918-3854-9; Paper ID PVP2009-77741, 8 pages.

    More information

  215. Author: Franz Rauscher, E307-6

    F. Rauscher:
    "Gas cylinders with longitudinal cracks - cyclic fatigue life time after a pressure test";
    Talk: 10th International Conference on Pressure Vessel Technology, Vienna University of Technology; 2003-07-07 - 2003-07-10; in: "Pressure Vessel Technology 2003", Österreichische Gesellschaft für Schweißtechnik, Wien (2003), ISBN: 3-9501528-1-4; 475 - 480.

    More information

  216. Author: Franz Rauscher, E307-6
    Other person involved: Peter Tscheliesnig, TÜV Austria

    F. Rauscher:
    "Identifying Acoustic Emission Events with Similar Transfer Functions";
    Talk: 29th European Conference on Acoustic Emission Testing, Wien; 2010-09-08 - 2010-09-10; in: "Proceedings of the 29th European Conference on Acoustic Emission Testing, EWGAE Vienna, September 2010", P Tscheliesnig (ed.); NDT.net - The Open Access NDT Database, Kirchwald, Germany (2010), ISBN: 978-3-200-01956-0; Paper ID 52, 8 pages.

    More information

  217. Author: Franz Rauscher, E307-6

    F. Rauscher:
    "Laboratory Experiments For Assessing The Detectability Of Specific Defects By Acoustic Emission Testing";
    Talk: EWGAE - Krakow 2008, Krakow; 2008-09-17 - 2008-09-19; in: "Proceedings of The 28-th European Conference on Acoustic Emission Testing", European Working Group on Acoustic Emission (EWGAE) and Cracow University of Technology, Krakow, Poland, Krakow (2008), ISBN: 978-83-7242-478-5; 31 - 36.

    More information

  218. Author: Franz Rauscher, E307-6

    F. Rauscher:
    "The effect of pressure tests on cyclic life";
    Talk: 10th International Conference on Pressure Vessel Technology, Vienna University of Technology; 2003-07-07 - 2003-07-10; in: "Pressure Vessel Technology 2003", Österreichische Gesellschaft für Schweißtechnik, Wien (2003), ISBN: 3-9501528-1-4; 459 - 464.

    More information

  219. Author: Franz Rauscher, E307-6
    Other person involved: Antolino Gallego

    F. Rauscher:
    "Using X22-Correlation for Sub-clustering and Relative Location of Acoustic Emission Signals";
    Talk: 30th European Conference on Acoustic Emission Testing & 7th International Conference on Acoustic Emission, Granada; 2012-09-12 - 2012-09-15; in: "Proceedings of the 30th European Conference on Acoustic Emission Testing & 7th International Conference on Acoustic Emission", A Gallego (ed.); NDT.net - The Open Access NDT Database, Germany (2012), ISBN: 978-84-615-9941-7; Paper ID 69, 14 pages.

    More information

  220. Authors: Franz Rauscher, E307-6; Sebastian Schindler, E307-6

    F. Rauscher, S. Schindler:
    "Design Check against Global Plastic Deformation - Determination of the Maximum Allowable Pressure by FEA";
    Talk: WCCM V, Wien; 2002-07-07 - 2002-07-12; in: "WCCM Fifth World Congrss on Computational Mechanics Vol. II", Vienna University of Technology, Vol II / Vienna (2002), ISBN: 3-9501554-2-2.

    More information

  221. Authors: Christian Redl; Margit Gföhler, E307-3; Marcus Pandy

    Ch. Redl, M. Gföhler, MG Pandy:
    "Sensitivity of muscle force estimates in human gait to variations in muscle-tendon properties";
    Talk: Fifth World Congress of Biomechanics, München; 2006-07-29 - 2006-08-04; in: "Journal of Biomechanics, Abstracts of the 5th World Congress of Biomechanics", Elsevier, 39/1 (2006), ISSN: 0021-9290; 51.

  222. Authors: Christian Redl; Margit Gföhler, E307-3; Marcus Pandy

    Ch. Redl, M. Gföhler, MG Pandy:
    "Sensitivity of Muscle Force Estimates to Changes in Muscle Properties";
    Talk: Proc. European Workshop On Movement Science 2005, Wien; 2005-06-02 - 2005-06-04; in: "Proc. European Workshop on Movement Science", (2005), 54 - 55.

  223. Authors: Werner Reichenfelser, E307-3; Margit Gföhler, E307-3; Thomas Angeli, E307-3

    W. Reichenfelser, M. Gföhler, T. Angeli:
    "Design of a test- and trainings- tricycle for paraplegics.";
    Talk: 3rd International Congress on Restoration of (wheeled) Mobility in SCI Rehabilitation: State of the Art III, Amsterdam; 2004-04-19 - 2004-04-21; in: "Journal of Rehabilitation Research & Development", Journal of Rehabilitation Research & Development JRRD, 41 (2004), 28 - 29.

  224. Authors: Werner Reichenfelser, E307-3; Margit Gföhler, E307-3

    W. Reichenfelser, M. Gföhler et al.:
    "Hybrid Assistive Device with Gravity Compensation and Feedback Controlled NMES to Support Daily Upper Limb Activities";
    Talk: Automed 2013, Dresden; 2013-10-09 - 2013-10-11; in: "Hybrid Assistive Device with Gravity Compensation and Feedback Controlled NMES to Support Daily Upper Limb Activities", (2013), ISBN: 978-3-943356-82-3; 62 - 63.

  225. Authors: Werner Reichenfelser, E307-3; Margit Gföhler, E307-3; Tanja Kakebeeke; Peter Lugner, E325-1; Gunter Feik, E325-4

    W. Reichenfelser, M. Gföhler, T. Kakebeeke, P. Lugner, G. Feik:
    "Determination of efficient stimulation patterns for FES - cycling";
    Talk: EMBEC`05, Prague; 2005-11-20 - 2005-11-25; in: "IFMBE Proc.", (2005).

    More information

  226. Authors: Werner Reichenfelser, E307-3; Margit Gföhler, E307-3; Tanja Kakebeeke; Peter Lugner, E325-1; Gunter Feik, E325-4

    W. Reichenfelser, M. Gföhler, T. Kakebeeke, P. Lugner, G. Feik:
    "Optimierung der Stimulationsbereiche für das FES- Radfahren";
    Talk: ÖGBMT Jahrestagung, Hall; 2005-11-10 - 2005-11-12; in: "Proc. CD", (2005).

    More information

  227. Authors: Werner Reichenfelser, E307-3; Margit Gföhler, E307-3; Stefan Mina, ARC; Sten Hanke, ARC; Harald Hackl, E307-3; Tanja Kakebeeke; Peter Lugner, E325-1; Andreas Hochgatterer

    W. Reichenfelser, M. Gföhler, S. Mina, S. Hanke, H. Hackl, T. Kakebeeke, P. Lugner, A. Hochgatterer:
    "FES-Fahrradtrainingssystem für Paraplegiker";
    Talk: 20. Jahrestagung der DMGP, Wien; 2007-05-09 - 2007-05-12; in: "20. Jahrestagung der DMGP - der thorakolumbale Übergang", (2007).

  228. Authors: Werner Reichenfelser, E307-3; Harald Hackl, E307-3; Josef Hufgard, AUVA; Karin Gstaltner, AUVA; Margit Gföhler, E307-3

    W. Reichenfelser, H. Hackl, J. Hufgard, K. Gstaltner, M. Gföhler:
    "Effect of FES Cycling Training on Spasticity in Spinal Cord Injured Subjects";
    Talk: International Conference on Biomechanics and Biomedical Engineering, Kuala Lumpur; 2013-02-14 - 2013-02-15; in: "World Academy of Science, Engineering and Technology", World Academy of Science, Engineering and Technology, 74 (2013), ISSN: 2010-3778; 227 - 230.

  229. Authors: Werner Reichenfelser, E307-3; Harald Hackl, E307-3; Josef Hufgard, AUVA; Karin Gstaltner, AUVA; Margit Gföhler, E307-3
    Other person involved: International Spinal Cord Soci

    W. Reichenfelser, H. Hackl, J. Hufgard, K. Gstaltner, M. Gföhler:
    "Quantification of spasticity in incomplete SCI subjects during a pedaling movement and influence of training with FES";
    Talk: ISCOS 2009, 48th Annual Scientific Meeting, Florence; 2009-10-21 - 2009-10-24; in: "ISCOS 2009", International Spinal Cord Soci (ed.); (2009), 154 - 155.

  230. Authors: Werner Reichenfelser, E307-3; Harald Hackl, E307-3; Josef Hufgard, AUVA; Karin Gstaltner, AUVA; Josef Kastner, FIOT; Margit Gföhler, E307-3

    W. Reichenfelser, H. Hackl, J. Hufgard, K. Gstaltner, J. Kastner, M. Gföhler:
    "Monitoring of the rehabilitation progress of subjects with incomplete spinal cord injury";
    Talk: 24. Jahrestagung der Deutschsprachigen Medizinischen Gesellschaft für Paraplegie, Bad Wildbad; 2011-05-25 - 2011-05-28; in: "Berufliche Rehabilitation Querschnittgelähmter: ein entscheidender Schritt zur gesellschaftlichen Teilhabe", (2011), 42 - 43.

  231. Authors: Werner Reichenfelser, E307-3; Harald Hackl, E307-3; Stefan Mina, ARC; Sten Hanke, ARC; Peter Lugner, E325-1; Margit Gföhler, E307-3

    W. Reichenfelser, H. Hackl, S. Mina, S. Hanke, P. Lugner, M. Gföhler:
    "Trainings- and Measurement- System for FES-Cycling";
    Poster: 13th Annual Conf. of the International Functional Electrical Stimulation Society, Freiburg, Germany; 2008-09-21 - 2008-09-25; in: "IFESS 2008- from movement to mind", Biomedizinische Technik, Vol. 53 Suppl.1, Berlin, New York (2008), ISSN: 0939-4990; 265 - 267.

    More information

  232. Authors: Werner Reichenfelser, E307-3; Jakob Karner, E307-3; Margit Gföhler, E307-3

    W. Reichenfelser, J Karner, M. Gföhler:
    "Arm Exoskeleton with Gravity Compensation for Application with NMES";
    Talk: International Conference on NeuroRehabilitation, Toledo, Spanien; 2012-11-14 - 2012-11-16; in: "Converging Clinical and Engineering Research on Neurorehabilitation", Springer-Verlag, (2012), ISSN: 2195-3562; 1159 - 1163.

  233. Authors: Werner Reichenfelser, E307-3; Jakob Karner, E307-3; Margit Gföhler, E307-3

    W. Reichenfelser, J Karner, M. Gföhler:
    "Design Concept for a Mobile Arm Support";
    Poster: ESMAC 2011 Europ. Soc. of Gait Analysis for Adults & Children, Vienna; 2011-09-15 - 2011-09-17; in: "Proceedings of the 20th Annual Meeting of the European Society of Movement Analysis for Adults and Children", (2011), 162 - 163.

    More information

  234. Authors: Werner Reichenfelser, E307-3; Jakob Karner, E307-3; Margit Gföhler, E307-3

    W. Reichenfelser, J Karner, M. Gföhler:
    "Modular arm orthosis with weight support: mechanical concept";
    Poster: International Neurorehabilitation Symposium - INRS 2011, Zürich; 2011-06-27 - 2011-06-28; in: "Rehab Week Zürich 2011", (2011), 51.

    More information

  235. Author: Laurenz Rinder, E307-3

    L. Rinder:
    "Entwicklung, Beurteilung und Optimierung";
    Talk: VDI-Tagung, Universität Dortmund, Universität Dortmund; 2002-09-25 - 2002-09-27; in: "Entwicklung, Beurteilung und Optimierung von Rotorprofilen mit der Profilsteigungsfunktion", (2002).

    More information

  236. Authors: Laurenz Rinder, E307-3; Peter Kral, E307-3; Stefan Pausch

    L. Rinder, P. Kral, S. Pausch:
    "Vergleichende Untersuchungen an Rolltreppengetrieben";
    Talk: 13.Int.Colloquium Tribology d. Techn. Akademie Esslingen, Techn. Akademie Esslingen; 2002-01-14 - 2002-01-18; in: "13.Int. Colloquium Tribology d. Techn. Akademie Esslingen", 1 (2002).

    More information

  237. Authors: Patrick Rosenberger, E307-5; Detlef Gerhard, E307-5

    P. Rosenberger, D. Gerhard:
    "Context-awareness in industrial applications: definition, classification and use case";
    Talk: Cirp Cms 2018, Stockholm; 2018-05-16 - 2018-05-18; in: "Procedia CIRP", Procedia CIRP, 72 (2018), ISSN: 2212-8271; 1172 - 1177.

    More information

  238. Authors: Patrick Rosenberger, E307-5; Detlef Gerhard, E307-5

    P. Rosenberger, D. Gerhard:
    "Evaluating context-aware systems: State-of-the-art analysis and introduction of a customized framework";
    Talk: 48th International Conference on Computers and Industrial Engineering, CIE 2018, Auckland, New Zealand; 2018-12-02 - 2018-12-05; in: "Proceedings of International Conference on Computers and Industrial Engineering, CIE", Proceedings of International Conference on Computers and Industrial Engineering, CIE, Volume 2018 (2018), ISSN: 2164-8689.

    More information

  239. Authors: Patrick Rosenberger, E307-5; Detlef Gerhard, E307-5; Stefan Dumss, E307-5

    P. Rosenberger, D. Gerhard, S. Dumss:
    "Modelling the Behaviour of Context-aware Systems: State-of-the-Art Analysis and Introduction of a Customized UML Profile";
    Talk: MODELSWARD 2019, Prague, Czech Republic; 2019-02-20 - 2019-02-22; in: "Proceedings of the 7th International Conference on Model-Driven Engineering and Software Development", Proceedings of the 7th International Conference on Model-Driven Engineering and Software Development, Volume 1 (2019), ISBN: 978-989-758-358-2; 521 - 528.

    More information

  240. Authors: Patrick Rosenberger, E307-5; Detlef Gerhard, E307-5

    P. Rosenberger, D. Gerhard et al.:
    "Context-Aware System Analysis: Introduction of a Process Model for Industrial Applications";
    Talk: 2018 International Conference on Enterprise Information Systems (ICEIS), Madeira; 2018-03-21 - 2018-03-24; in: "roceedings of the 20th International Conference on Enterprise Information Systems - Volume 2", Proceedings of the 20th International Conference on Enterprise Information Systems, Volume 2 (2018), ISBN: 978-989-758-298-1; 368 - 375.

    More information

  241. Authors: Thomas Schauer; Christian Klauer; Jakob Karner, E307-3; Werner Reichenfelser, E307-3; Margit Gföhler, E307-3; Emilia Ambrosini; Simona Ferrante; Sven Zwicker; Alessandra Pedrocchi

    T. Schauer, C. Klauer, J Karner, W. Reichenfelser, M. Gföhler, E. Ambrosini, S. Ferrante, S. Zwicker, A. Pedrocchi:
    "Feedback control of arm movements for a hybrid assistive system to support daily upper limb activities.";
    Talk: Technically Assisted Rehabilitation, Berlin; 2013-03-14 - 2013-03-15; in: "Proc. TAR 2013", (2013), 4 pages.

    More information

  242. Author: Sebastian Schindler, E307-6

    S. Schindler:
    "Stress concentrations in cylindrical shells with geometric imperfections under external pressure";
    Talk: 10th International Conference on Pressure Vessel Technology, Vienna University of Technology; 2003-07-07 - 2003-07-10; in: "Pressure Vessel Technology 2003", Österreichische Gesellschaft für Schweißtechnik, Wien (2003), ISBN: 3-9501528-1-4; 121 - 126.

    More information

  243. Authors: Wilfried Sihn, E330-02 [FHA, GB PL]; Fritz Bleicher, E311-01; Detlef Gerhard, E307-5
    Other persons involved: Wilfried Sihn, E330-02 [FHA, GB PL]; Andreas Jäger, E330-02-1 [FHA, GB PL]

    W. Sihn, F. Bleicher, D. Gerhard:
    "Vision and implementation of the Learning and Innovation Factory of the Vienna University of Technology";
    Talk: 2nd Conference on Learning Factories, Wien; 2012-05-10; in: "Competitive production in Europe through education and training", W. Sihn, A. Jäger (ed.); (2012), 160 - 177.

  244. Authors: Christoph Strasser, E307-2; Bruno Grösel, E307-1

    C. Strasser, B. Grösel:
    "A Landscape of Methods - A Practical Approach to Support Method Use in Industry";
    Talk: DESIGN 2004, 8th International Design Conference, Dubrovnik - Croatia;; 2004-08-18 - 2004-08-21; in: "Proceedings of the DESIGN 2004, 8th International Design Conference", (2004), ISBN: 953-6313-59-6; 1167 - 1172.

  245. Authors: Christoph Strasser, E307-2; Wolfgang Wimmer, E307-2

    C. Strasser, W. Wimmer:
    "Eco-Innovation, Combining ECODESIGN and TRIZ for Environmentally Sound Product Development";
    Talk: 14th International Conference on Engineering Design, Stockholm, Sweden; 2003-08-19 - 2003-08-21; in: "Proceedings of ICED 03", (2003), ISBN: 1-904670-00-8.

    More information

  246. Authors: Christoph Strasser, E307-2; Wolfgang Wimmer, E307-2

    C. Strasser, W. Wimmer:
    "Supporting Customer Driven Eco-Solutions - Implementing Ecodesign in the Daily Work of Product Developers";
    Talk: EcoDesign 2003, 3rd International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Tokyo, Japan; 2003-12-08 - 2003-12-11; in: "Proceedings of EcoDesign 2003", (2003), ISBN: 0-7695-2048-0.

    More information

  247. Author: Walter Struckl, E307-2

    W. Struckl:
    "Umweltgerechte Metrofahrzeugentwicklung auf Basis von Ökobilanz-Daten";
    Talk: Netzwerk Lebenszyklus-Daten, Bad Urach; 2006-06-22 - 2006-06-23; in: "Netzwerk Lebenszyklusdaten Ökobilanz-Werkstatt 2006", (2006).

  248. Authors: Walter Struckl, E307-2; Wolfgang Wimmer, E307-2
    Other persons involved: Shozo Takata; Yasushi Umeda

    W. Struckl, W. Wimmer:
    "Green Line - strategies for environmentally improved railway vehicles";
    Talk: 14th CIRP Conference on Life Cycle Engineering, Tokyo; 2007-06-11 - 2007-06-13; in: "Advances in Life Cycle Engineering for Sustainable Manufacturing Businesses", S. Takata, Y. Umeda (ed.); Springer Verlag, (2007), ISBN: 978-1-84628-934-7; 77 - 82.

  249. Authors: Roman Talla, E307-3; Georg Adamcik, E307-3; Norbert Barta, E307-3; Inesa Benediktovna Kozlovskaya; Anatoli Grigoriev; Harald Tschan, UNI Wien; Norbert Bachl, UNI Wien; Thomas Angeli, E307-3

    R Talla, G. Adamcik, N. Barta, I.B. Kozlovskaya, A Grigoriev, H Tschan, N Bachl, T. Angeli:
    "Multifunctional Dynamometer for Application in Space. Training and Diagnostic in Microgravity.";
    Talk: 17th IAA Humans in Space Symposium, 17th IAA Humans in Space Symposium; 2009-06-07 - 2009-06-11; in: "17th IAA Humans in Space Symposium", (2009), ISBN: 978-5-902119-09-8; 131.

  250. Authors: Roman Talla, E307-3; Georg Adamcik, E307-3; Norbert Barta, E307-3; Inesa Benediktovna Kozlovskaya; Harald Tschan, UNI Wien; Norbert Bachl, UNI Wien; Thomas Angeli, E307-3

    R Talla, G. Adamcik, N. Barta, I.B. Kozlovskaya, H Tschan, N Bachl, T. Angeli:
    "New Training and Diagnostic Strategies to Counteract Muscle and Bone Loss in Microgravity";
    Poster: Life in Space for Life on Earth Symposium 2012, Aberdeen, United Kingdom; 2012-06-18 - 2012-06-22; in: "Life in Space for Life on Earth Symposium 2012", (2012), 126.

    More information

  251. Authors: Roman Talla, E307-3; Thomas Angeli, E307-3; Norbert Barta, E307-3; Georg Adamcik, E307-3; Harald Tschan, UNI Wien; Norbert Bachl, UNI Wien

    R Talla, T. Angeli, N. Barta, G. Adamcik, H Tschan, N Bachl:
    "Training in Space for Life on Earth";
    Talk: 10th ESA Life Sciences Symposium, Anger; 2008-06-22 - 2008-06-27; in: "Life in Space for Life on Earth", (2008).

  252. Authors: Roman Talla; Angela Frotzler, SPZ; Thomas Angeli, E307-3; Noel Lythgo, Univ. of Melbourne; Mary Galea, Univ. of Melbourne; Prisca Eser, Univ. of Melbourne

    R. Talla, A. Frotzler, T. Angeli, L. Lythgo, M. Galea, P. Eser:
    "Bone status after stroke and spinal cord injury";
    Talk: 4. Black Forest Forum for Musculoskeletal Interactions, Bad Liebenzell; 2007-05-10 - 2007-05-13; in: "4. Black Forest Forum for Musculoskeletal Interactions", (2007), 16 - 18.

    More information

  253. Authors: Arthur van Soest; Margit Gföhler, E307-3; Richard Casius

    AJK van Soest, M. Gföhler, R Casius:
    "Can releasing the ankle joint improve power output of paraplegic FES cycling? A simulation study.";
    Talk: 14th Conference of the European Society of Biomechanics, Den Bosch (invited); 2004; in: "Proc. 14th Conference of the European Society of Biomechanics", (2004).

  254. Authors: Johann Wassermann, E325-4; Manfred Schneeberger, E325-4; Franz Höftberger; Klaus Hoffmann, E307-1; Anton Pirko, E307-1; Klaus Decker, E307-1; Markus Schneider, E307-1

    J. Wassermann, M. Schneeberger, F. Höftberger, K. Hoffmann, A. Pirko, K. Decker, M. Schneider:
    "Wireless Data Transfer System for Rotating Machinery - Very Robust Against Electromagnetic Interference";
    Talk: 1st International Conference on Sensing Technology, Palmerston North, New Zealand (invited); 2005-11-21 - 2005-11-23; in: "Proceedings of the First International Conference on Sensing Technology", (2005), ISBN: 0-473-10504-7; 647 - 651.

  255. Author: Michael Weigand, E307-3
    Other persons involved: Hans-Peter Degischer, E308-D; Sigrid Lüftl, E308-S

    M. Weigand:
    "Luftfahrtgetriebe - Leistungsübertragung leichtgemacht";
    Talk: Tagungsband, Wien; 2009-09-24 - 2009-09-25; in: "Prinzipien, Werkstoffauswahl und Fertigungsvarianten in der Luftfahrt", H.P. Degischer, S. Lüftl (ed.); (2009).

    More information

  256. Author: Wolfgang Wimmer, E307-2

    W. Wimmer:
    "Ecodesign - opportunities and challenges for sustainable product development";
    Talk: MHCL '15, Wien (invited); 2015-09-23 - 2015-09-25; in: "XXI International conference on material handling, constructions and logistics", (2015), ISBN: 978-86-7083-863-5; 33 - 38.

  257. Author: Wolfgang Wimmer, E307-2

    W. Wimmer:
    "Following the path from sustainable consumption to ECODESIGN in companies; experiences made so far";
    Talk: The Second International Workshop on "Sustainable Consumption", Tokyo (invited); 2003-12-12 - 2003-12-13; in: "Proceedings", (2003), 116 - 121.

  258. Authors: Wolfgang Wimmer, E307-2; Robert Attwenger, E307-2; Peter Judmaier, E307-2

    W. Wimmer, R. Attwenger, P. Judmaier:
    "Stimulating ECODESIGN in companies - The development of an e-learning shell for training the way to environmentally sound products";
    Talk: Proceedings of the Fourth International Symposium on Eco-Efficiency and the Drive Towards Sustainability: Concespts for the Electr(on)ics & Automotive Industry CARE INNOVATIN 2002, Wien; 2002-11-25 - 2002-11-28; in: "Proceedings of the Fourth International Symposium on Eco-Efficiency and the Drive Towards Sustainability: Concespts for the Electr(on)ics & Automotive Industry CARE INNOVATIN 2002", (2002), 316 - 321.

    More information

  259. Authors: Wolfgang Wimmer, E307-2; Niki Bey
    Other person involved: Dorian Marjanovic

    W. Wimmer, N. Bey:
    "The Way to do Ecodesign in Companies - Installing a Continuous Improvement Process";
    Talk: International Design Conference - DESIGN 2004, Dubrovnik (invited); 2004-05-18 - 2004-05-21; in: "Proceedings of the DESIGN 2004 - 8th International Design Conference ", D. Marjanovic (ed.); Faculty of Mechanical Engineering and Naval Architecture, Volume 3 (2004), ISBN: 953-6313-62-6; 1565 - 1570.

  260. Author: Wolfgang Wimmer, E307-2

    W. Wimmer et al.:
    "An integrated approach for introducing ECODESIGN into an industrial company; from customer demands to an Environmental Product Declaration";
    Poster: 14th International Conference on Engineering Design, Stockholm; 2003-08-19 - 2003-08-21; in: "Research for Practice", (2003).

  261. Authors: Wolfgang Wimmer, E307-2; Peter Judmaier, E307-2

    W. Wimmer, P. Judmaier:
    "Learning and Understanding ECODESIGN - Preparing the Complex Environmental Relations of Products for Straightforward Application in Companies";
    Talk: 3rd International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Tokyo; 2003-12-08 - 2003-12-11; in: "EcoDesign 2003", (2003).

  262. Authors: Wolfgang Wimmer, E307-2; Kun-Mo LEE; In-Tae JEONG; John-Hee HONG

    W. Wimmer, K.-M. LEE, I. JEONG, J. HONG:
    "ECODESIGN IN TWELVE STEPS - PROVIDING SYSTEMATIC GUIDANCE FOR CONSIDERING ENVIRONMENTAL ASPECTS AND STAKEHOLDER REQUIREMENTS IN PRODUCT DESIGN AND DEVELOPMENT";
    Talk: 15th International Conference on Engineering Design, Melbourne; 2005-08-15 - 2005-08-18; in: "Engineering Design and the Global Economy", (2005), ISBN: 0-85825-788-2; Paper ID 342.43, 11 pages.

  263. Authors: Wolfgang Wimmer, E307-2; Hesamedin Ostad Ahmad Ghorabi, E307-2

    W. Wimmer, H. Ostad Ahmad Ghorabi:
    "Ecodesign of Alpine Skis and other Sport Equipment-Considering Environmental Issues in Product Design and Development";
    Keynote Lecture: 3 rd Asia-Pacific Congress on Sport Technology, Singapore (invited); 2007-09-23 - 2007-09-26; in: "The Impact of Technology on Sport II", Taylor & Francis Group, (2007), ISBN: 978-0-415-45695-1; 15 - 23.

  264. Authors: Wolfgang Wimmer, E307-2; Rainer Pamminger, E307-2; Marek Stachura

    W. Wimmer, R. Pamminger, M. Stachura:
    "Der ECODESIGN EEG-PILOT, eine Anpassung des Produkt- Innovations-, Lern- und Optimierungs-Tool zur Entwicklung umweltgerechter Elektro- und Elektronikgeräte";
    Talk: eco-X: ecology and economy in electroniX 2005, Wien; 2005-06-08 - 2005-06-10; in: "Proceedings of eco-X ecology and economy in electroniX 2005", (2005), 343 - 355.

  265. Authors: Wolfgang Wimmer, E307-2; Rainer Pamminger, E307-2; Marek Stachura; Ratko Grab

    W. Wimmer, R. Pamminger, M. Stachura, R. Grab:
    "ECODESIGN in the electronics industry - achieving legal compliance with the EU-directives and environmentally improving products by using the new EEE-Pilot";
    Talk: 4th International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Tokyo; 2005-12-12 - 2005-12-14; in: "EcoDesign 2005", (2005), ISBN: 1-4244-0082-1; Paper ID 3B-2-3F, 7 pages.

  266. Authors: Wolfgang Wimmer, E307-2; Christoph Strasser, E307-2; Rainer Pamminger, E307-2

    W. Wimmer, C. Strasser, R. Pamminger:
    "Integrating environmental customer demands in product development - Combining Quality Function Deployment (QFD) and the ECODESIGN Product-Investigation-, Learning- and Optimization- Tool (PILOT)";
    Talk: 10th CIRP Seminar on Life Cycle Engineering, Copenhagen, Denmark; 2003-05-21 - 2003-05-22; in: "Proceedings of the 10th CIRP Seminar on Life Cycle Engineering", (2003), ISBN: 87-91035-01-5.

    More information

  267. Authors: Wolfgang Wimmer, E307-2; Rainer Züst; Christoph Strasser, E307-2

    W. Wimmer, R. Züst, C. Strasser:
    "The Application of the ECODESIGN PILOT and Methodical Suppoprt for the Implementation of ECODESIGN in Products";
    Talk: Proceedings of the DESIGN 2002, 7th International Design Conference, Cavtat - Dubrovnik - Croatia; 2002-05-14 - 2002-05-17; in: "7th International Design Conference - DESIGN 2002", (2002), ISBN: 953-6313-46-4; 1357 - 1364.

    More information

  268. Authors: Alfred Wondracek; Georg Kartnig, E307-1

    A. Wondracek, G. Kartnig:
    "Creation of a program to dimension hopper and belt feeder";
    Talk: Junior Scientist Conference 2010, Wien; 2010-04-07 - 2010-04-09; in: "Proceedings of the Junior Scientist Conference 2010", (2010), ISBN: 978-3-200-01797-9; 27 - 28.

  269. Authors: Johannes Zajc, OBH; Markus Puchinger, E307-3; Michael Russold, OBH; Margit Gföhler, E307-3

    J. Zajc, M. Puchinger, M. Russold, M. Gföhler:
    "Comparison of Three Control Strategies for an Upper Arm Rehabilitation Device";
    Talk: 4th International Conference on Neurorehabilitation 2018 (ICNR 2018), Pisa; 2018-10-16 - 2018-10-20; in: "Converging Clinical and Engineering Research on Neurorehabilitation III", Springer, (2018), 162 - 166.

    More information

  270. Authors: H. Zehetgruber; C. Bürger; Thomas Angeli, E307-3

    H. Zehetgruber, C. Bürger, T. Angeli:
    "Intraoperative Measurement of Retropatellar Contact - Ressure During Total Knee Arthroplasty";
    Talk: 3rd annual international conference, Havanna, Cuba; 2004; in: "3rd annual international conference", (2004), 346.

  271. Authors: H. Zehetgruber; C. Bürger; Thomas Angeli, E307-3

    H. Zehetgruber, C. Bürger, T. Angeli:
    "Intraoperative Measurement of Retropatellar Contact - Ressure During Total Knee Arthroplasty";
    Poster: 2005 Annual Meeting, American Academy of Orthopaedic Surgeons, Washington, DC; 2005-02-23 - 2005-02-27; in: "American Academy of Orthopaedic Surgeons", (2005), 1 pages.

    More information

  272. Author: Josef Zeman, E307-6

    J. Zeman:
    "FATIGUE DESIGN CHECK OF WELDED REGIONS: A PROPOSAL FOR COMBINING EN 13445 AND ASME DIVISION VIII SECTION 2 REWRITE CONCEPTS";
    Talk: 11th International Conference on Pressure Vessel Technology-2006, Vancouver, Canada; 2006-07-23 - 2006-07-27; in: "CD", (2006), ISBN: 0-7918-3782-3.

    More information

  273. Authors: Nenad Zrnic; S.M. Bosnjak; Klaus Hoffmann, E307-1

    N. Zrnic, S. Bosnjak, K. Hoffmann:
    "Application of Non-Dimensional Models in Dynamic Structural Analysis of Cranes under Moving Concentrated Load";
    Talk: 6th Vienna Conference on Mathematical Modelling, Wien; 2009-02-11 - 2009-02-13; in: "ARGESIM Report no. 35", (2009), ISBN: 978-3-901608-35-3; 327 - 336.

  274. Authors: Nenad Zrnic; Klaus Hoffmann, E307-1
    Other person involved: Marco Ceccarelli

    N. Zrnic, K. Hoffmann:
    "Development of Design of Ship-To-Shore Container Cranes: 1959-2004";
    Talk: International Symposium on History of Machines and Mechanisms, Cassino (invited); 2004-05-12 - 2004-05-15; in: "International Symposium on History of Machines and Mechanisms", M. Ceccarelli (ed.); Kluwer Academic Publishers, (2004), ISBN: 1-4020-2203-4; 229 - 242.

  275. Authors: Nenad Zrnic; Klaus Hoffmann, E307-1; S.M. Bosnjak

    N. Zrnic, K. Hoffmann, S. Bosnjak:
    "A note on the history of handling in ports: from ancient to medieval cranes";
    Talk: 12th IFToMM World Congress, Besancon; 2007-06-18 - 2007-06-21; in: "Tagungsband 12th IFToMM World Congress", (2007), 1 - 6.

  276. Authors: Rainer Züst; Wolfgang Wimmer, E307-2

    R. Züst, W. Wimmer:
    "Multimedia ECODESIGN PILOT - Training Course based on Print Media, CD-ROM and Internet for Learning and practical application in industry";
    Talk: 9th International Seminar on Life Cycle Engineering, Erlangen, Germany; 2002-04-09 - 2002-04-10; in: "Proceedings of the 9th International Seminar on Life Cycle Engineering", (2002), ISBN: 3-87525-167-9; 129 - 134.

    More information

  277. Authors: Rainer Züst; Wolfgang Wimmer, E307-2; Daniel Kammerer

    R. Züst, W. Wimmer, D. Kammerer:
    "The Creating Sustainable Solutions - New Planning and Decision Making Tools and Modified Organisational Structures";
    Talk: 36th CIRP-International Seminar on Manufacturing Systems, Saarbrücken; 2003-06-03; in: "Proceedings of the 36th CIRP-International Seminar on Manufacturing Systems", (2003), 1 - 9.


Talks and Poster Presentations (without Proceedings-Entry)


  1. Authors: Johann Ableitinger; Klaus Decker, E307-1; Fritz Binder; S Dallinger

    J. Ableitinger, K. Decker, F. Binder, S. Dallinger:
    "In-situt Dehnungsmessungen von Schrauben an einem Fahrbahnübergang zur Ermittlung der Vorspann- und Betriebskräft";
    Talk: Innovation Messtechnik, Wien; 2017-05-11.

  2. Author: Thomas Angeli, E307-3

    T. Angeli:
    "Belastung des Herz-Kreislauf-Systems durch Sport";
    Talk: 18. Ärztetage Grado, Grado; 2009-05-17 - 2009-05-23.

  3. Author: Thomas Angeli, E307-3

    T. Angeli:
    "Belastung des muskulo-skelettären Systems durch Sport";
    Talk: 18. Ärztetage Grado, Grado; 2009-05-17 - 2009-05-23.

  4. Author: Thomas Angeli, E307-3

    T. Angeli:
    "Der Einfluss des Sports auf den Knochenstoffwechsel und die Knochen";
    Talk: Österreichische Akademie der Ärzte, Grado, Italien; 2004-05-16 - 2004-05-22.

  5. Author: Thomas Angeli, E307-3

    T. Angeli:
    "Einsatz unterschiedlicher Trainingsformen in der Rehabilitation - Training im "Mars 500 - Projekt" und die Erkenntnisse für Rehabilitation und Sport";
    Talk: 19. Ärztetage Grado, Grado; 2010-05-30 - 2010-06-05.

  6. Author: Thomas Angeli, E307-3

    T. Angeli:
    "Elektrostimulation im Sport und der Rehabilitation";
    Talk: Österreichische Akademie der Ärzte, Grado, Italien; 2004-05-16 - 2004-05-22.

  7. Author: Thomas Angeli, E307-3

    T. Angeli:
    "Hüftschmerz im mittleren Alter: Zu alt für Dysplasie, zu jung für Athrose - Hüftimpingement?";
    Talk: 21. Ärztetage Grado 2012, Grado, Italien; 2012-06-03 - 2012-06-09.

  8. Author: Thomas Angeli, E307-3

    T. Angeli:
    "Interaktion zwischen Knochen und Muskulatur";
    Talk: Ärztetage Grado 2008, Grado; 2008-05-18 - 2008-05-24.

  9. Author: Thomas Angeli, E307-3

    T. Angeli:
    "Interaktion zwischen Muskulatur und Knochen";
    Talk: Ärztetage Grado 2006, Grado; 2006-05-21 - 2006-05-27.

    More information

  10. Author: Thomas Angeli, E307-3

    T. Angeli:
    "Knochenstoffwechsel";
    Talk: Ärztetage Grado 2005, Grado; 2005-05-22 - 2005-05-28.

  11. Author: Thomas Angeli, E307-3

    T. Angeli:
    "MUSKEL-Knochen-Interaktion; Knochen: Auswirkungen "richtiger / falscher" Belastung aus der Sicht der Biomechanik, Knochenaufbau";
    Talk: 25 Jahre Ärztetage Grado, Grado, Italien; 2016-05-22 - 2016-05-28.

  12. Author: Thomas Angeli, E307-3

    T. Angeli:
    "MUSKEL-Knochen-Interaktion; Muskulatur: Biomechanik der Muskulatur, Muskelaufbau";
    Talk: 25 Jahre Ärztetage Grado, Grado, Italien; 2016-05-22 - 2016-05-28.

  13. Author: Thomas Angeli, E307-3

    T. Angeli:
    "Optimierung biomechanischer Bewegungsabläufe mittels Simulation";
    Talk: Österr. Ingenieur- und Architektenverein (ÖIAV), Wien (invited); 2005-10-20.

  14. Author: Thomas Angeli, E307-3

    T. Angeli:
    "STRETCHING - Dehnen, aber richtig";
    Talk: 24. Ärztetage GRADO 2015, Grado; 2015-05-31 - 2015-06-06.

  15. Author: Thomas Angeli, E307-3

    T. Angeli:
    "STRETCHING - Fakten versus Legenden";
    Talk: 24. Ärztetage GRADO 2015, Grado; 2015-05-31 - 2015-06-06.

  16. Author: Thomas Angeli, E307-3

    T. Angeli:
    "Sturzprävention durch Gleichgewichts- und Jongliertraining";
    Talk: 23. Ärztetage Grado, Grado; 2014-05-25 - 2014-05-31.

  17. Author: Thomas Angeli, E307-3

    T. Angeli:
    "Totale Endoprothese des Hüftgelenks - Warum haben viele Sportler im höherem Alter eine Hüft-TEP?";
    Talk: 21. Ärztetage Grado 2012, Gado, Italien; 2012-06-03 - 2012-06-09.

  18. Author: Thomas Angeli, E307-3

    T. Angeli:
    "Trainingseinflüsse auf den alternden Knochen";
    Talk: Österreichische Akademie der Ärzte, Grado 2003; 2003-05-25 - 2003-05-31.

  19. Author: Thomas Angeli, E307-3

    T. Angeli:
    "Trainingsgeräte für Fitness, Leistungssport und Rehabilitation - Ausdauer- und Koordinationstraining";
    Talk: 26. Ärztetage - Grado, Grado, Italien; 2017-05-21 - 2017-05-27.

  20. Author: Thomas Angeli, E307-3

    T. Angeli:
    "Trainingsgeräte für Fitness, Leistungssport und Rehabilitation - Muskelaufbau";
    Talk: 26. Ärztetage - Grado, Grado, Italien; 2017-05-21 - 2017-05-27.

  21. Author: Thomas Angeli, E307-3

    T. Angeli:
    "TRAININGSGERÄTE im Test - In den Medien angepriesene Trainingsgeräte: Geräte für Ausdauer- und Koordinationstraining";
    Talk: 22. Ärztetage, Grado, Italien; 2013-05-26 - 2013-06-01.

  22. Author: Thomas Angeli, E307-3

    T. Angeli:
    "TRAININGSGERÄTE im Test - In den Medien angepriesene Trainingsgeräte: Geräte für das Krafttraining";
    Talk: 22. Ärztetage, Grado, Italien; 2013-05-26 - 2013-06-01.

  23. Author: Thomas Angeli, E307-3

    T. Angeli:
    "Vorteile des exzentrischen Trainings im Sport - Training im "Mars 500 - Projekt" und die Erkenntnisse für Rehabilitation und Sport";
    Talk: 19. Ärztetage Grado, Grado; 2010-05-30 - 2010-06-05.

  24. Author: Thomas Angeli, E307-3

    T. Angeli:
    "Was ist im Alter biologisch wirklich anders";
    Talk: SPORTUNION Kongress "Sport für Einsteiger", Faak am See, Österreich; 2003-09-07 - 2003-09-09.

  25. Authors: Thomas Angeli, E307-3; Norbert Bachl; Krista Herzog; Werner Schwarz

    T. Angeli, N. Bachl, K. Herzog, W. Schwarz:
    "Seminar: Erleben altersbedingter Einschränkungen mittels Verwendung einer "Age-Simulator-Einheit"";
    Talk: Österreichische Akademie der Ärzte, Grado, Italien; 2003-05-25 - 2003-05-31.

  26. Authors: Thomas Angeli, E307-3; Bernhard Gmeiner, E307-3; Christoph Kumpf, E307-3; Norbert Barta, E307-3; Georg Adamcik, E307-3; Roman Talla, E307-3

    T. Angeli, B. Gmeiner, C. Kumpf, N. Barta, G. Adamcik, R Talla:
    "The Benefits Of Lower Extremity Loading In Space Due To The Seated Execution Of Ordinary Calf Raises And The Leg Press On Human Subjects";
    Talk: 68th International Astronautical Congress (IAC), Adelaide, Australia; 2017-09-25 - 2017-09-29.

    More information

  27. Author: Mulu Bayray, E307-6

    M Bayray:
    "Identification of Early Fatigue Crack Growth in a Pressure Vessel Utilising Acoustic Emission (AE) Technique";
    Talk: AEGW 45, Evanston IL, USA; 2002-08-19 - 2002-08-21.

    More information

  28. Authors: Martin Egger, E307-1; Alexander Haber, E307-1; Klaus Decker, E307-1

    M. Egger, A. Haber, K. Decker:
    "Antriebsleistung eines Abzugförderbandes";
    Talk: 21. Fachtagung Schüttgutfördertechnik 2016, München; 2016-10-12 - 2016-10-13.

  29. Author: Thomas Gabmayer, E307-1

    T. Gabmayer:
    "Einsatz drucksensitiver Prescale-Folien zur Ermittlung der Flächenpressung in Komponenten des Maschinenbaus";
    Talk: Innovation Messtechnik, Wien (invited); 2011-05-10.

  30. Author: Carsten Gachot, E307-3

    C. Gachot:
    ""How to tailor surfaces?",";
    Keynote Lecture: 1. Györer Tribologie Tagung, Györ, Ungarn (invited); 2010-09-18.

  31. Author: Carsten Gachot, E307-3

    C. Gachot:
    "A critical assessment of surface texturing for friction and wear improvement - Quo Vadis?";
    Keynote Lecture: International COnference on Energy and Advanced Materials, Melakka, Malaysia (invited); 2017-10-16 - 2017-10-19.

  32. Author: Carsten Gachot, E307-3

    C. Gachot:
    "Chemische Reaktionen an der Oberfläche? Die Welt der Tribo-Schichten";
    Keynote Lecture: VResearch Expertenseminar, Feldkirch Vorarlberg (invited); 2017-06-26 - 2017-06-27.

  33. Author: Carsten Gachot, E307-3

    C. Gachot:
    "Direct Laser Interference Patterning - Pros and Cons in Tribology";
    Keynote Lecture: 6th World Tribology Congress WTC, Beijing China (invited); 2017-09-19 - 2017-09-23.

  34. Author: Carsten Gachot, E307-3

    C. Gachot:
    "Integrated Tribo-Design, Faculty of Mechanical Engineering";
    Talk: Symposium, Belgrade (invited); 2018-05-24.

  35. Author: Carsten Gachot, E307-3

    C. Gachot:
    "Novel Laser-based Coating for Forming Processes";
    Talk: 45th International Conference on Metallurgical Coatings and Thin Films (ICMCTF) 2018, San Diego, CA; 2018-04-23 - 2018-04-27.

  36. Author: Carsten Gachot, E307-3

    C. Gachot:
    "The importance of lubricants in machine elements";
    Talk: Materials Science and Engineering - MSE 2018, Darmstadt (invited); 2018-09-26 - 2018-09-28.

  37. Author: Detlef Gerhard, E307-5

    D. Gerhard:
    "Auf dem Weg zur praxisorientierten Kompetenz: Cross-Teaching TU-HTL und interfakultäre Kooperation";
    Talk: TU Wien E-Learning Tag 2008: E-Learning abseits des Mainstreams, Wien; 2008-11-20.

  38. Author: Detlef Gerhard, E307-5

    D. Gerhard:
    "Die Bedeutung der Wissensplattform PDM aus universitärer Sicht";
    Keynote Lecture: PTC Anwender- & Innovationsforum, Steyregg, Schloss (invited); 2007-06-14.

    More information

  39. Author: Detlef Gerhard, E307-5

    D. Gerhard:
    "PLM - ein Managementansatz für die Industrie";
    Keynote Lecture: CSC PLM Expertengespräch, Wien (invited); 2007-03-31.

    More information

  40. Author: Detlef Gerhard, E307-5

    D. Gerhard:
    "PLM Impulsreferat Integrated Architecture";
    Talk: CSC PLM Expertengespräch, Linz (invited); 2011-10-20.

    More information

  41. Author: Detlef Gerhard, E307-5

    D. Gerhard:
    "Semantic Web Technologien und Produktdatenmanagement";
    Talk: Contact Automotive Symposium, München (invited); 2008-11-20.

  42. Authors: Detlef Gerhard, E307-5; Touba Rahmani, E307-5

    D. Gerhard, T. Rahmani:
    "Konzept zur Wissensrepräsentation von Produktstrukturen mit Hilfe von Ontologien";
    Talk: DFX-Symposium 2012, Bamberg; 2012-10-04 - 2012-10-05.

    More information

  43. Author: Margit Gföhler, E307-3

    M. Gföhler:
    "Biomechanical Modeling & Simulation of Human Movement in the Context of Rehabilitation";
    Talk: Symposium On Musculoskeletal Biomechanics, Technische Universität Wien; 2012-06-29.

  44. Author: Margit Gföhler, E307-3

    M. Gföhler:
    "Elektrostimuliertes Fahrradfahren als Therapieform für Personen mit Paraplegie";
    Talk: AUVA Rehabilitationszentrum Weisser Hof, AUVA Rehabilitationszentrum Weisser Hof (invited); 2009-03-02.

  45. Author: Margit Gföhler, E307-3

    M. Gföhler:
    "Musculoskeletal Modeling & Simulation of Human Movement - Applications in Rehabilitation";
    Talk: IMEMP Seminar, Cardiff School of Engineering Cardiff University (invited); 2012-12-12.

    More information

  46. Author: Manfred Grafinger, E307-5

    M. Grafinger:
    "CATIA FEM Effiziente Simulationen im Produktentwicklungsprozess";
    Talk: PLM Forum 2008, Steyregg, Linz (invited); 2008-09-24 - 2008-09-25.

    More information

  47. Author: Manfred Grafinger, E307-5

    M. Grafinger:
    "Nichtlineare Finite Elemente Simulation mit dem neuen CATIA V5 ANL - Modul";
    Talk: PLM Forum 2010, Mannheim (invited); 2010-06-16 - 2010-06-17.

  48. Author: Manfred Grafinger, E307-5

    M. Grafinger:
    "PLM-Produkte an der TU-Wien";
    Talk: IBM PLM-Forum 2006, Wien (invited); 2006-09-07.

    More information

  49. Author: Bruno Grösel, E307-1

    B. Grösel:
    "Erforderlicher Technischer Durchsatz von Materialflusssystemen zur Erreichung eines Solldurchsatzes";
    Talk: Universität Nis - Tagung Transport und Logistik, Nis; 2006-05-17 - 2006-05-19.

  50. Author: Bruno Grösel, E307-1

    B. Grösel:
    "Mechanical stage equipment - modern developments";
    Talk: OISTAT - Technology Commission - Meeting in Antwerp, Antwerpen (invited); 2004-12-02 - 2004-12-06.

  51. Author: Bruno Grösel, E307-1

    B. Grösel:
    "Semperbauten und Bühnentechnik - Die Revolution der Bühnentechnik in der Zeit Sempers bis zum Ersten Weltkrieg";
    Talk: Bühnentechnisches Kolloquium, Dresden; 2003-11-21 - 2003-11-23.

  52. Author: Bruno Grösel, E307-1

    B. Grösel:
    "Technologietransfer von der Universität in die Industrie dargestellt an Hand des Projektes - Vienna Rail Research Initiative";
    Talk: Forum Alpbach, Alpbach (invited); 2005-08-24.

  53. Author: Bruno Grösel, E307-1

    B. Grösel:
    "Zuverlässigkeit und Verfügbarkeit von Maschinen und Anlagen";
    Talk: The First Serbian Seminar with International Participation - Transport and Logistics, Nis (invited); 2004-05-27 - 2004-05-28.

  54. Authors: Alexander Haber, E307-1; Martin Egger, E307-1

    A. Haber, M. Egger:
    "Caking mechanisms during the production process";
    Talk: CFDEM-Conference, Linz; 2017-09-14 - 2017-09-15.

  55. Authors: Reinhard Hainisch, E307-3; Margit Gföhler, E307-3; Zubayer Karim, E307-3; Andreas Kranzl; Marcus Pandy

    R. Hainisch, M. Gföhler, Z. Karim, A. Kranzl, MG Pandy:
    "Computational Modeling of Crouch Gait in Children with Cerebral Palsy";
    Talk: Dreiländertagung 2011 der ÖGMP, DGMP und SGSMP, Wien; 2011-09-28 - 2011-10-01.

    More information

  56. Authors: Michael Harasek, E166-02-2; Margit Gföhler, E307-3; Benjamin Lukitsch, E166-02-2; Christoph Janeczek, E307-3; Alen Karabegovic, E307-3; Florentine Huber-Dangl, E307-3; Claus G. Krenn; Roman Ullrich

    M. Harasek, M. Gföhler, B. Lukitsch, C. Janeczek, A. Karabegovic, F. Huber-Dangl, C. Krenn, R. Ullrich:
    "Simulation of an Intracorporeal Membrane Catheter for CO2 Reduction in Blood";
    Talk: 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and 3rd Conference on Imaging and Visualization, CMBBE 2018, Lisbon; 2018-03-26 - 2018-03-29.

  57. Authors: Michael Harasek, E166-02-2; Bahram Haddadi, E166-02-2; Christian Jordan, E166-02-2; Verena Halmschlager; Margit Gföhler, E307-3; Christoph Janeczek, E307-3; Alen Karabegovic, E307-3; Livia Futter, E307; Claus-Georg Krenn, CCORE Techn. GmbH; Susanna Neudl, MedUni Wien; Robert Ullrich, CCORE Techn. GmbH

    M. Harasek, B. Haddadi, C. Jordan, V. Halmschlager, M. Gföhler, C. Janeczek, A. Karabegovic, L. Futter, C. Krenn, S. Neudl, R. Ullrich:
    "Intracorporeal Membrane Catheter for CO2 Reduction in a Blood-Membrane Contactor";
    Talk: ESAO 2017 - 44th Annual Congress of the European Society for Artificial Organs, Wien; 2017-09-05 - 2017-09-09.

  58. Authors: Michael Harasek, E166-02-2; Benjamin Lukitsch, E166-02-2; Margit Gföhler, E307-3; Christoph Janeczek, E307-3; Alen Karabegovic, E307-3; Florentine Huber-Dangl, E307-3; Claus G. Krenn; Roman Ullrich

    M. Harasek, B. Lukitsch, M. Gföhler, C. Janeczek, A. Karabegovic, F. Huber-Dangl, C. Krenn, R. Ullrich:
    "CFD Simulation of blood gas transport in a hollowfiber membrane packing for design optimization of intracorporal CO2 removal catheters";
    Poster: 8th World Congress of Biomechanics, WCB 2018, Dublin; 2018-07-08 - 2018-07-12.

  59. Authors: Martin Hennig, E307-5; Gerhard Reisinger, E330-02 [FHA, GB PL]; Thomas Trautner, E311-01-3; Philipp Hold, E330-02 [FhA, GB PL]; Detlef Gerhard, E307-5; Alexandra Mazak, E194-03

    M. Hennig, G. Reisinger, T. Trautner, P. Hold, D. Gerhard, A. Mazak:
    "TU Wien Pilot Factory Industry 4.0";
    Talk: 9th Conference on Learning Factories 2019, Braunschweig; 2019-03-26 - 2019-03-28.

    More information

  60. Author: Klaus Hoffmann, E307-1

    K. Hoffmann:
    "Flächenpressungsmessung";
    Talk: OVE Akademie, Wien (invited); 2002-10-29.

  61. Author: Klaus Hoffmann, E307-1

    K. Hoffmann:
    "Neue Entwicklungen bei Gurtbandförderern";
    Talk: Hungarian University of Transylvania, Targo Mures (invited); 2004-05-20.

  62. Author: Klaus Hoffmann, E307-1

    K. Hoffmann:
    "Neue Entwicklungen bei Gurtbandförderern";
    Talk: University of Zilina, Zilina (invited); 2004-05-25.

  63. Author: Klaus Hoffmann, E307-1

    K. Hoffmann:
    "Some new Developments and Research in Belt Conveyors";
    Talk: Transsilvania University of Brasov, Brasov; 2004-05-18.

  64. Authors: Christoph Janeczek, E307-3; Paul Ecker, E166-02-2; Florentine Huber-Dangl, E307-3; Alen Karabegovic, E307-3; Benjamin Lukitsch, E166-02-2; Michael Harasek, E166-02-2; Christian Jordan, E166-02-2; Roman Ullrich; Margit Gföhler, E307-3

    C. Janeczek, P. Ecker, F. Huber-Dangl, A. Karabegovic, B. Lukitsch, M. Harasek, C. Jordan, R. Ullrich, M. Gföhler:
    "The Minimally Invasive Liquid Lung Catheter: In-Vitro Results in a Model Environment";
    Talk: ESAO 2018 - 45th Annual Congress of the European Society for Artificial Organs, Madrid; 2018-09-12 - 2018-09-15.

  65. Authors: Christoph Janeczek, E307-3; Alen Karabegovic, E307-3; Florentine Huber-Dangl, E307-3; Michael Harasek, E166-02-2; Benjamin Lukitsch, E166-02-2; Claus G. Krenn; Roman Ullrich; Reinhard Willinger, E302-02; Margit Gföhler, E307-3

    C. Janeczek, A. Karabegovic, F. Huber-Dangl, M. Harasek, B. Lukitsch, C. Krenn, R. Ullrich, R. Willinger, M. Gföhler:
    "Intravascular Membrane Catehter for CO2 Reduction: In Vitro Tests and First Results";
    Poster: 8th World Congress of Biomechanics, WCB 2018, Dublin; 2018-07-08 - 2018-07-12.

  66. Author: Georg Kartnig, E307-1

    G. Kartnig:
    "DIN EN 13001 vs. DIN 15018 Ein Rechenbeispiel";
    Talk: Austrian Standards Seminar Aktuelle Regelwerke im Bereich Kran und Hebezeuge, Wien; 2013-10-01.

  67. Author: Georg Kartnig, E307-1

    G. Kartnig:
    "Struktur und Methoden der technischen Logistik anhand von drei Fallbeispielen";
    Talk: Aktuelles Know-How der TU Wien für Logistik und Distribution, Wien; 2009-10-21.

  68. Author: Georg Kartnig, E307-1

    G. Kartnig:
    "Technische Logistik: Vom Gabelstapler zum Internet der Dinge";
    Talk: Veranstaltung des Rotary Clubs Graz - Zeughaus, Graz (invited); 2011-06-22.

  69. Authors: Bernhard Kohlhauser, E308-GrMayrh; Helmut Riedl, E308-GrMayrh; Manel Ripoll Rodríguez; Carsten Gachot, E307-3; Paul Heinz Mayrhofer, E308-GrMayrh

    B. Kohlhauser, H. Riedl, M. Ripoll Rodríguez, C. Gachot, P.H. Mayrhofer:
    "In-situ solid lubricant formation on W or Mo based carbide and nitride coatings in lubricated tribo contacts";
    Talk: Spring Meeting of the European Materials Research Society 2018, Strasbourg; 2018-06-18 - 2018-06-22.

    More information

  70. Authors: Bernhard Kohlhauser, E308-GrMayrh; Manel Ripoll Rodríguez; Helmut Riedl, E308-GrMayrh; Carsten Gachot, E307-3; Paul Heinz Mayrhofer, E308-GrMayrh

    B. Kohlhauser, M. Ripoll Rodríguez, H. Riedl, C. Gachot, P.H. Mayrhofer:
    "Interaction of EP additives with W or Mo based carbide and nitride coatings and their in-situ related formation of a low friction tribofilm.";
    Talk: 6th World Tribology Congress WTC, Beijing, China; 2017-09-17 - 2017-09-23.

  71. Authors: Bernhard Kohlhauser, E308-GrMayrh; Manel Ripoll Rodríguez; Helmut Riedl, E308-GrMayrh; Carsten Gachot, E307-3; Giovanni Ramirez, ANL; Ali Erdemir, ANL; Paul Heinz Mayrhofer, E308-GrMayrh

    B. Kohlhauser, M. Ripoll Rodríguez, H. Riedl, C. Gachot, G Ramirez, A. Erdemir, P.H. Mayrhofer:
    "Generation of a low friction tribofilm on Mo- and W-containing surfaces and coatings";
    Talk: The 7th International Conference on the Internet of Things (IoT 2017), Linz, Austria; 2017-10-22 - 2017-10-25.

  72. Authors: Florian Krautzer, E307; Rainer Pamminger, E307-2; Carl Diver, CDAMC; Wolfgang Wimmer, E307-2; Karsten Schischke, Fraunhofer IZM

    F. Krautzer, R. Pamminger, C. Diver, W. Wimmer, K. Schischke:
    "Environmental Assessment Of Industrial Machines - A New Web-Based Concept Applied To The Edm Process";
    Talk: IMC30 Conference, University College Dublin; 2013-09-03 - 2013-09-04.

    More information

  73. Authors: Benjamin Lukitsch, E166-02-2; Margit Gföhler, E307-3; Christoph Janeczek, E307-3; Paul Ecker, E166-02-2; Alen Karabegovic, E307-3; Florentine Huber-Dangl, E307-3; Claus-Georg Krenn, CCORE Techn. GmbH; Robert Ullrich, CCORE Techn. GmbH; Michael Harasek, E166-02-2

    B. Lukitsch, M. Gföhler, C. Janeczek, P. Ecker, A. Karabegovic, F. Huber-Dangl, C. Krenn, R. Ullrich, M. Harasek:
    "CFD Simulation of Blood Gas Transport in a Hollow Fiber Membrane Packing for Design Optimization of an Intracorporeal Membrane Oxygenator";
    Talk: ESAO 2018 - 45th Annual Congress of the European Society for Artificial Organs, Madrid, Spanien; 2018-09-12 - 2018-09-15.

  74. Authors: Benjamin Lukitsch, E166-02-2; Bahram Haddadi, E166-02-2; Paul Ecker, E166-02-2; Christian Jordan, E166-02-2; Margit Gföhler, E307-3; Christoph Janeczek, E307-3; Susanna Neudl, MedUni Wien; Robert Ullrich, CCORE Techn. GmbH; Michael Harasek, E166-02-2

    B. Lukitsch, B. Haddadi, P. Ecker, C. Jordan, M. Gföhler, C. Janeczek, S. Neudl, R. Ullrich, M. Harasek:
    "Challenges in Simulation of Blood Gas Transport in Hollow Fiber Membrane Oxygenators";
    Talk: PFAU 17: Palaver on Foam - Austrian Users "Stammtisch", Wien; 2018-11-15.

  75. Authors: Benjamin Lukitsch, E166-02-2; Bahram Haddadi, E166-02-2; Christian Jordan, E166-02-2; Verena Halmschlager; Margit Gföhler, E307-3; Christoph Janeczek, E307-3; Alen Karabegovic, E307-3; Florentine Huber-Dangl, E307-3; Claus-Georg Krenn, CCORE Techn. GmbH; Robert Ullrich, CCORE Techn. GmbH; Michael Harasek, E166-02-2

    B. Lukitsch, B. Haddadi, C. Jordan, V. Halmschlager, M. Gföhler, C. Janeczek, A. Karabegovic, F. Huber-Dangl, C. Krenn, R. Ullrich, M. Harasek:
    "Challenges in Simulation of Blood Gas Transport in Hollow Fiber Membrane Oxygenators";
    Talk: PFAU 16: Palaver on Foam - Austrian Users "Stammtisch", Linz; 2018-07-09.

  76. Author: Hesamedin Ostad Ahmad Ghorabi, E307-2

    H. Ostad Ahmad Ghorabi:
    "Ecodesign - Sustainable Product Development";
    Keynote Lecture: Vortrag an der Michigan Technological University, Week of Business 2006, Houghton, Michigan, USA (invited); 2006-10-31 - 2006-11-09.

  77. Author: Hesamedin Ostad Ahmad Ghorabi, E307-2

    H. Ostad Ahmad Ghorabi:
    "Improve Your Products, Lower Your Costs, Care for Your World: Ecodesign";
    Keynote Lecture: Vortrag an der Tecnologico de Monterrey, ENTORNO 2006, Guadalajara, Jalisco, Mexiko (invited); 2006-10-26 - 2006-10-28.

  78. Author: Hesamedin Ostad Ahmad Ghorabi, E307-2

    H. Ostad Ahmad Ghorabi:
    "Innovative Products through ECODESIGN - A Six Step Approach for Green Products";
    Poster: Student Summit for Sustainability, Tokyo, Japan (invited); 2007-03-05 - 2007-03-09.

  79. Author: Hesamedin Ostad Ahmad Ghorabi, E307-2

    H. Ostad Ahmad Ghorabi:
    "Sustainability and Design - How to do Ecodesgin";
    Talk: Vortrag an der Tehran University, Teheran, Iran (invited); 2007-09-27.

  80. Author: Hesamedin Ostad Ahmad Ghorabi, E307-2

    H. Ostad Ahmad Ghorabi:
    "Sustainable Product Design - A Path Towards Innovative Products";
    Talk: Vortrag an der Azad University of Semnan, Semnan, Iran (invited); 2007-09-22.

  81. Author: Rainer Pamminger, E307-2

    R. Pamminger:
    "EEG-Pilot - Tool for WEEE/RoHS conformity";
    Talk: 2nd VIDA Conference, Virtual Design and Automation - New Trends in Collaborative Product Design, Poznan, Polen (invited); 2005-11-27 - 2005-11-29.

  82. Authors: Rainer Pamminger, E307-2; Carl Diver, CDAMC

    R. Pamminger, C. Diver:
    "LCA to Go: Deriving improvement potentials of industrial machines using Environmental Assessment";
    Talk: TEMPO Seminar, Cork, Ireland; 2013-07-25.

    More information

  83. Authors: Rainer Pamminger, E307-2; Wolfgang Wimmer, E307-2

    R. Pamminger, W. Wimmer:
    "ECODESIGN in 12 steps - a systematic approach to integrate environmental considerations into product design and development";
    Talk: 2nd VIDA Conference, Virtual Design and Automation - New Trends in Collaborative Product Design, Poznan, Polen (invited); 2005-11-27 - 2005-11-29.

  84. Author: Anton Pirko, E307-1

    A. Pirko:
    "Beiträge zur digitalen Produktentwicklung am Beispiel des Neubaus eines Bandprüfstands";
    Talk: Chinesisch-Deutsches Hochschulkolleg der Tongji Universität, Shanghai (invited); 2006-05-31.

  85. Author: Franz Rauscher, E307-6

    F. Rauscher:
    "Druckgeräte - Analytischer Zulässigkeitsnachweis - Direkte Methode";
    Talk: ANSYS Conference & 3. CADFEM Austria Users' Meeting, InterCityHotel Wien; 2008-04-24 - 2008-04-25.

    More information

  86. Author: Franz Rauscher, E307-6

    F. Rauscher:
    "Tresca's or Mises' Yield Condition in Pressure Vessel Design";
    Talk: FENet TECHNOLOGY WORKSHOPS, Budapest, Hungary; 2005-02-24 - 2005-02-25.

    More information

  87. Authors: Laurenz Rinder, E307-3; Martin Kuchler, E307-3; Harald Hackl, E307-3

    L. Rinder, M. Kuchler, H. Hackl:
    "Water-Injection or Oil-Injection for Screw-Compressors - A Comparison";
    Talk: Vortrag, University of West Bohemia, Pilsen, Czech Republic (invited); 2004-10-25 - 2004-10-27.

    More information

  88. Author: Christoph Strasser, E307-2

    C. Strasser:
    "Der ECODESIGN-PILOT: Ein praxisbezogenes Werkzeug für umweltgerechte Produktgestaltung";
    Talk: 12. Oö. PREPARE-Roundtable, Altheim, Oberösterreich (invited); 2003-05-27.

  89. Authors: Walter Struckl, E307-2; Anton Stribersky; Walter Gunselmann

    W. Struckl, A. Stribersky, W. Gunselmann:
    "Enhancing the environmental performance of rail transport - challenges, good examples, further tasks";
    Talk: Workshop of the Allianz pro Schiene, Berlin; 2006-09-19.

  90. Author: Wolfgang Wimmer, E307-2

    W. Wimmer:
    "Wettbewerbsvorteile durch Umweltgerechte Produktgestaltung";
    Keynote Lecture: 2. Elektronik ecodesign congress, München; 2010-10-12 - 2010-10-13.

  91. Author: Josef Zeman, E307-6

    J. Zeman:
    "Design by Analysis: Present & Future: EN 13445-3 Direct Route";
    Talk: 10th International Conference on Pressure Vessel Technology, Panel, ICPVT-10; 2003-07-07 - 2003-07-10.

    More information

  92. Author: Josef Zeman, E307-6

    J. Zeman:
    "Elevated Temperature Design: Proposal for EN 13445-3";
    Talk: 10th International Conference on Pressure Vessel Technology, Panel, ICPVT-10; 2003-07-07 - 2003-07-10.

    More information

  93. Author: Josef Zeman, E307-6

    J. Zeman:
    "EN 13445-3: Fatigue Design Check: Welded Regions";
    Talk: 11th International Conference on Pressure Vessel Technology-2006, Vancouver, Canada (invited); 2006-07-23 - 2006-07-27.

  94. Author: Josef Zeman, E307-6

    J. Zeman:
    "Fatigue Design acc. to EN 13445-3 Clause 18";
    Talk: 10th International Conference on Pressure Vessel Technology, Panel, ICPVT-10; 2003-07-07 - 2003-07-10.

    More information


Patents


  1. Authors: Michael Harasek, E166-02-2; Margit Gföhler, E307-3

    M. Harasek, M. Gföhler:
    "Regelungsvorrichtung und -verfahren";
    Patent: Österreich, No. A51017/2018; submitted: 2018-11-20.

  2. Authors: Klaus Hoffmann, E307-1; Viktoria Helm; Florian Lackenbauer; Christin Raithel

    K. Hoffmann, V. Helm, F. Lackenbauer, C. Raithel:
    "Pferdelaufband";
    Patent: Österreich, No. 507688; submitted: 2008-11-21, granted: 2012-01-15.

  3. Authors: Klaus Hoffmann, E307-1; Robert Liehl

    K. Hoffmann, R. Liehl:
    "Verfahren zum Messen des Querwindverhaltens von Seilbahnen";
    Patent: Austria, No. A 1426/2002; submitted: 2002-09-23, granted: 2004-01-15.

  4. Authors: Christoph Janeczek, E307-3; Margit Gföhler, E307-3; Michael Harasek, E166-02-2

    C. Janeczek, M. Gföhler, M. Harasek:
    "Stoffaustauschvorrichtung";
    Patent: Österreich, No. At 519916 B1; submitted: 2017-04-20, granted: 2019-02-15.

  5. Authors: Christoph Janeczek, E307-3; Markus Hinteregger, E307-3

    C. Janeczek, M. Hinteregger:
    "Magnetkupplung";
    Patent: Austria, No. A50343/2014; submitted: 2014-05-15.

  6. Authors: Peter Judmaier, E307-2; Christoph Strasser, E307-2

    P. Judmaier, C. Strasser:
    "Verriegelung für ein Feststellmesser";
    Patent: Austria, No. A 1226/2004; submitted: 2004-07-20.

  7. Author: Alen Karabegovic, E307-3

    A. Karabegovic:
    "Gassystem";
    Patent: Austria, No. A50369/2017; submitted: 2017-05-05, granted: 2017-05-06.

  8. Authors: Alen Karabegovic, E307-3; Margit Gföhler, E307-3

    A. Karabegovic, M. Gföhler:
    "Verfahren und System zur Regelung der Austauschrate eines Permeats";
    Patent: Austria, No. A50894/2017; submitted: 2017-10-25, granted: 2017-10-26.

  9. Authors: Werner Mohl, MedUni Wien; Margit Gföhler, E307-3; Reinhard Willinger, E302-02; Christoph Janeczek, E307-3

    W. Mohl, M. Gföhler, R. Willinger, C. Janeczek:
    "Ventricular Assist Device";
    Patent: USA, No. Us 14/324,727; submitted: 2014-07-07.

  10. Author: Markus Puchinger, E307-3

    M. Puchinger:
    "Einrichtung zur Befestigung einer Arm-Stützstruktur";
    Patent: Austria, No. A50460/2016; submitted: 2016-05-18, granted: 2017-05-18.

    More information

  11. Authors: Markus Puchinger, E307-3; Nithin Babu Rajendra Kurup, E307-3; Margit Gföhler, E307-3

    M. Puchinger, N. Babu Rajendra Kurup, M. Gföhler:
    "Gelenksschonender Rollstuhlantrieb";
    Patent: Österreich, No. A50609/2018; submitted: 2018-07-16.

    More information

  12. Authors: Werner Reichenfelser, E307-3; Harald Hackl, E307-3; Margit Gföhler, E307-3; Josef Hufgard, AUVA

    W. Reichenfelser, H. Hackl, M. Gföhler, J. Hufgard:
    "Vorrichtung sowie Verfahren zur Quantifizierung der Spastizität zumindest einer Extremität";
    Patent: Österreich, No. A 434/2009; submitted: 2009-03-18.

    More information

  13. Authors: Werner Reichenfelser, E307-3; Markus Puchinger, E307-3

    W. Reichenfelser, M. Puchinger:
    "Arm-Exoskelett";
    Patent: Austria, No. A 50429/2015; submitted: 2015-05-27, granted: 2016-05-25.

    More information


Habilitation Theses


  1. Author: Margit Gföhler, E307-3

    M. Gföhler:
    "Cycling by Means of Functional Electrical Stimulation";
    TU Wien, 2001.

  2. Author: Manfred Grafinger, E307-5

    M. Grafinger:
    "Die computerunterstützte Entwicklung der Flankenprofile für Sonderverzahnungen von Schraubenkompressoren";
    TU-Wien / Maschinenwesen und Betriebswissenschaften, 2010.

    More information

  3. Author: Franz Rauscher, E307-6

    F. Rauscher:
    "Pressure Test and Acoustic Emission Examination";
    Technische Universität Wien, 2004.

    More information

  4. Author: Wolfgang Wimmer, E307-2

    W. Wimmer:
    "Entwicklung einer Methodik zur Implementierung von umweltgerechter Produktgestaltung in Betrieben";
    Technische Universität Wien/Fakultät für Maschienenbau, 2002.


Doctor's Theses (authored and supervised)


  1. Author: Harald Abersfelder
    Other persons involved: Josef Zeman, E307-6; Peter Lugner, E325-1

    H. Abersfelder:
    "Bemessung von geschlossenen, prismatischen Behältern unter Innendruck";
    Supervisor, Reviewer: J. Zeman, P. Lugner; Institut für Apparate- und Anlagenbau, 2001.

    More information

  2. Author: Georg Adamcik, E307-3
    Other persons involved: Thomas Angeli, E307-3; Heinz-Bodo Schmiedmayer, E325-1

    G. Adamcik:
    "Weiterentwicklung und Analyse eines multifunktionellen Dynamometers mit isokinetischer Diagnostik für die Anwendung in der Schwerelosigkeit";
    Supervisor, Reviewer: T. Angeli, H. Schmiedmayer; E307-3, 2010; oral examination: 2010-10-01.

  3. Author: Ahmed Adel, E302-1
    Other persons involved: Manfred Grafinger, E307-5; Detlef Gerhard, E307-5; Karl Ponweiser, E302-1

    A. Adel:
    "Development of a new generation of parabolic trough collectors to maximize the local content in developing countries - from idea to business";
    Supervisor, Reviewer: M. Grafinger, D. Gerhard, K. Ponweiser; Konstruktionswissenschaften, 2018; oral examination: 2018-11-20.

    More information

  4. Author: Farhang Akhavei, E311-01-3
    Other persons involved: Burkhard Kittl, E311-01-3; Detlef Gerhard, E307-5; Alfred Taudes

    F. Akhavei:
    "Optimierung der Auftragsabwicklung in der Einzel- und Kleinserienfertigung mittels flexibler Produkt- und integrativer Prozessentwicklung am Beispiel des Apparate- und Behälterbaus";
    Supervisor, Reviewer: B. Kittl, D. Gerhard, A. Taudes; E311, 2017; oral examination: 2017-03-29.

  5. Author: Hanns Amri, E325-5
    Other persons involved: Michael Weigand, E307-3; Vladimir Zhuravlev, MAI; Franz Heitmeir, TU Graz

    H. Amri:
    "Variable Rotor Speed Drivetrain Investigation";
    Supervisor, Reviewer: M. Weigand, V. Zhuravlev, F. Heitmeir; Institut für Konstruktionswissenschaften, 2018; oral examination: 2018-11-16.

    More information

  6. Author: Thomas Angeli, E307-3
    Other persons involved: Erich Müller; Thomas Bochdansky

    T. Angeli:
    "Entwicklung eines trainingstherapeutischen Fahrrads für Paraplegiker";
    Supervisor, Reviewer: E. Müller, T. Bochdansky; Interfakultärer Fachbereich Sport- und Bewegungswissenschaft der Universität Salzburg, 2004; oral examination: 2004.

  7. Author: Thomas Angeli, E307-3
    Other persons involved: Laurenz Rinder, E307-3; Peter Lugner, E325-1

    T. Angeli:
    "Leistungssteigerung bei Fahrradantrieben";
    Supervisor, Reviewer: L. Rinder, P. Lugner; E 307-3 Institut für Konstruktionswissenschaften und Technische Logistik, 1996; oral examination: 1996.

  8. Author: Thomas Atz, TU München
    Other persons involved: Willibald Günthner; Georg Kartnig, E307-1

    T. Atz:
    "Eine algorithmenbasierte Methode zur ganzheitlichen Systemplanung automatischer Hochregallager";
    Supervisor, Reviewer: W. Günthner, G. Kartnig; Lehrstuhl für Maschinenwesen, Lehrstuhl für Fördertechnik Materalfluss Logistik, TU München, 2017; oral examination: 2017-11-10.

  9. Author: Norbert Barta, E307-3
    Other persons involved: Thomas Angeli, E307-3; Hanns Peter Jörgl, E325-5

    N. Barta:
    "Detailkonstruktion, Steuerungskonzept und Trainingsvorteile des Kraftdynamometers MDS";
    Supervisor, Reviewer: T. Angeli, H. Jörgl; E 307, 2011; oral examination: 2011-06-20.

    More information

  10. Author: Mulu Bayray, E307-6
    Other persons involved: Josef Zeman, E307-6; Hanns Peter Jörgl, E325-5

    M Bayray:
    "Crack Growth Investigations in Pressure Vessels using Acoustic Emission Technique";
    Supervisor, Reviewer: J. Zeman, H. Jörgl; Institut für Apparate- und Anlagenbau, 2002.

    More information

  11. Author: Franz Bruck, E325-1
    Other persons involved: Peter Lugner, E325-1; Thomas Angeli, E307-3

    F. Bruck:
    "Dynamische Interaktion von Schi und Schnee - Modellbildung und Simulation";
    Supervisor, Reviewer: P. Lugner, T. Angeli; E 325-1 Institut für Mechanik und Mechatronik, 2003; oral examination: 2003.

  12. Author: Ferrario Chiara
    Other persons involved: Ken Hunt; Margit Gföhler, E307-3

    F. Chiara:
    "FES leg cycling exercise in paraplegia: a pilot study for the definition and assessment of exercise testing protocols and efficacy of exercise"";
    Supervisor, Reviewer: K. Hunt, M. Gföhler; University of Glasgow, UK, 2008; oral examination: 2006-05-30.

  13. Author: Valentin Dalbauer, E308-GrMayrh
    Other persons involved: Paul Heinz Mayrhofer, E308-GrMayrh; Michael Stüber, KIT; Carsten Gachot, E307-3

    V. Dalbauer:
    "Phase Formation of Cathodic Arc Evaporated Al-Cr and Al-Cr-O Thin Films";
    Supervisor, Reviewer: P.H. Mayrhofer, M. Stüber, C. Gachot; Werkstoffwissenschaft und Werkstofftechnologie, 2018; oral examination: 2018-08-28.

  14. Author: Klaus Decker, E307-1
    Other persons involved: Bruno Grösel, E307-1; Wolfgang Katzenberger, E330-02-1

    K. Decker:
    "Bestimmung des erforderlichen technischen Durchsatzes von Materialflusselementen mittels diskreter Simulation";
    Supervisor, Reviewer: B. Grösel, W. Katzenberger; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2006.

  15. Author: Susanne Dienst
    Other persons involved: Madjid Fathi; Detlef Gerhard, E307-5

    S. Dienst:
    "Analyse von Maschinendaten zur Entscheidungsunterstützung bei der Produktverbesserung durch die Anwendung eines Feedback Assistenz Systems";
    Supervisor, Reviewer: M. Fathi, D. Gerhard; Universität Siegen - Institut für Wissensbasierte Systeme und Wissensmanagement, 2014; oral examination: 2014-07-25.

    More information

  16. Author: Michael Eder, E307-1
    Other persons involved: Georg Kartnig, E307-1; Thorsten Schmidt, Tu Dresden; Karl Heinz Wehking, TU Stuttgart

    M. Eder:
    "Shuttle-Systeme: Analytische Berechnung der Umschlagleistung und des Energieverbrauches";
    Supervisor, Reviewer: G. Kartnig, T. Schmidt, K. Wehking; E 307 - Konstruktionswissenschaften und Technische Logistik, 2017; oral examination: 2017-12-07.

  17. Author: Nalan Ektas
    Other persons involved: Glen Davis; Margit Gföhler, E307-3

    N. Ektas:
    "Design and Evaluation of an FES-Assisted Rowing System for Individuals with Spinal Cord Injury";
    Supervisor, Reviewer: G. Davis, M. Gföhler et al.; The University of Sydney, 2016; oral examination: 2016-02-22.

  18. Author: Gunter Feik, E325-4
    Other persons involved: Johann Wassermann, E325-4; Klaus Hoffmann, E307-1

    G. Feik:
    "Messeinrichtung zur indirekten Bestimmung dreidimensionaler Belastungen an Fahradpedalen";
    Supervisor, Reviewer: J. Wassermann, K. Hoffmann; Inst. für Mechanik und Mechatronik, 2005; oral examination: 2005-11-10.

    More information

  19. Author: Chiara Ferrario
    Other persons involved: Ken Hunt; Margit Gföhler, E307-3

    C. Ferrario:
    "FES leg cycling exercise in paraplegia: a pilot study for the definition and assessment of exercise testing protocols and efficacy of exercise";
    Supervisor, Reviewer: K. Hunt, M. Gföhler; University of Glasgow, 2006; oral examination: 2006-05-30.

  20. Author: Andreas Fertin, E307-1
    Other persons involved: Georg Kartnig, E307-1; Norbert Ostermann, E230-02

    A. Fertin:
    "All-Electric-Metro";
    Supervisor, Reviewer: G. Kartnig, N. Ostermann; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2014.

  21. Author: Thomas Gabmayer, E307-1
    Other persons involved: Klaus Hoffmann, E307-1; Burkhard Kittl, E311-01-3

    T. Gabmayer:
    "Untersuchung der Effektivität verschiedener Steuereinrichtungen zur Beeinflussung des seitlichen Laufverhaltens von Edelstahlprozessbändern";
    Supervisor, Reviewer: K. Hoffmann, B. Kittl; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2011; oral examination: 2011-06-16.

  22. Author: Detlef Gerhard, E307-5
    Other persons involved: Michael Abramovici; Sandor Vajna

    D. Gerhard:
    "Erweiterung der PDM-Technologie zur Unterstützung verteilter kooperativer Produktentwicklungsprozesse";
    Supervisor, Reviewer: M Abramovici, S. Vajna; Ruhr-Universität Bochum - Institut für Konstruktionstechnik, 2000; oral examination: 2000-07-24.

  23. Author: Hannes Giefing, E307-1
    Other persons involved: Bruno Grösel, E307-1; Bernhard Geringer, E315

    H. Giefing:
    "Ein Beitrag zur Modularisierung und Plattformbildung im Schienenfahrzeugbau";
    Supervisor, Reviewer: B. Grösel, B. Geringer; Institut für Konstruktionswissenschaften und Technische Logistik, 2006.

    More information

  24. Author: Stefan Glatz, E308-GrMayrh
    Other persons involved: Paul Heinz Mayrhofer, E308-GrMayrh; Carsten Gachot, E307-3; Suneel Kodambaka

    S.A. Glatz:
    "Influence of Transition Metals (Zr, Mo, W) on the High Temperature Performance of Arc Evaporated Ti-Al-N Hard Coating";
    Supervisor, Reviewer: P.H. Mayrhofer, C. Gachot, S. Kodambaka; Institut für Werkstoffwissenschaft und Werkstofftechnologie, E308, 2017; oral examination: 2017-06-14.

  25. Author: Ratko Grab
    Other persons involved: Wolfgang Wimmer, E307-2; V.-M. Archodoulaki, E308-S

    R. Grab:
    "Umweltgerechtes Diktiergerät";
    Supervisor, Reviewer: W. Wimmer, V. Archodoulaki; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2010.

  26. Author: Martin Grösel, E307
    Other persons involved: Margit Gföhler, E307-3; Christian Peham

    M. Grösel:
    "Erstellung eines dreidimensionalen biomechanischen Modells der equinen thorakolumbalen Wirbelsäule";
    Supervisor, Reviewer: M. Gföhler, C. Peham; Konstruktionswissenschaften und Technische Logistik, 2011; oral examination: 2011-06-09.

  27. Author: Peter Werner Grundnig, E166-01-1
    Other persons involved: Wilhelm Höflinger, E166-01-1; Klaus Hoffmann, E307-1

    P. Grundnig:
    "Verbesserung der Schüttguthomogenität mittels keilförmiger Siloeinbauten bei Massenflusssilos";
    Supervisor, Reviewer: W. Höflinger, K. Hoffmann; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2007; oral examination: 2007-12-21.

  28. Author: Harald Hackl, E307-3
    Other persons involved: Laurenz Rinder, E307-3; Ernst Pucher, E315

    H. Hackl:
    "Schalltechnische Untersuchungen an Lamellenventilen durch Signalanalyse";
    Supervisor, Reviewer: L. Rinder, E. Pucher; Institut für Maschinenelemente, 2003.

  29. Author: Reinhard Hainisch, E307-3
    Other persons involved: Margit Gföhler, E307-3; Thomas Haslwanter

    R. Hainisch:
    "Analysis Of Muscle Coordination In Crouchgait Of Children With Cerebral Palsy";
    Supervisor, Reviewer: M. Gföhler, T. Haslwanter; Konstruktionswissenschaften und Technische Logistik, 2015; oral examination: 2015-03-11.

  30. Author: Michael Hartl, E302-1
    Other persons involved: Karl Ponweiser, E302-1; Franz Rauscher, E307-6

    M. Hartl:
    "Pneumatisch vorgespannter Solarkonzentrator - theoretische Betrachtungen und praktische Erfahrungen";
    Supervisor, Reviewer: K. Ponweiser, F. Rauscher; Institut für Energietechnik und Thermodynamik, 2010; oral examination: 2010-10-11.

  31. Author: Sascha Hönigsberger
    Other persons involved: Walter Schwaiger, E330-04; Detlef Gerhard, E307-5

    S. Hönigsberger:
    "Bestimmung der betriebswirtschaftlichen Effektivität von Informationssicherheitsmaßnahmen";
    Supervisor, Reviewer: W.S.A. Schwaiger, D. Gerhard; Institut für Managementwissenschaften, 2009; oral examination: 2009-06-16.

  32. Author: Gabriel Isac
    Other persons involved: Klaus Hoffmann, E307-1; Laurenz Rinder, E307-3

    G. Isac:
    "Untersuchung des seitlichen Laufverhaltens von Förderbändern bei leicht konischen Trommeln";
    Supervisor, Reviewer: K. Hoffmann, L. Rinder; Institut für Konstruktionslehre und Fördertechnik, 2002.

  33. Author: Andreas Joppich
    Other persons involved: Hermann Haselbacher, E302-02; Klaus Hoffmann, E307-1

    A. Joppich:
    "Pneumatisches Brennstoffördersystem für direkt holzstaubgefeuerte Gasturbinen";
    Supervisor, Reviewer: H. Haselbacher, K. Hoffmann; Institut für Thermische Turbomaschinen und Energieanlagen, 1999.

  34. Author: Alen Karabegovic, E307-3
    Other persons involved: Margit Gföhler, E307-3; Eugenijus Kaniusas, E354-03; Claus G. Krenn

    A. Karabegovic:
    "Development of a hydraulic circulatory loop and sensorless flow control system for testing a minimally invasive pneumatic heart pump";
    Supervisor, Reviewer: M. Gföhler, E. Kaniusas, C. Krenn; IKL, 2017; oral examination: 2017-06-08.

  35. Author: Mohammad Reza Kariman
    Other persons involved: Reinhard Willinger, E302-02; Manfred Grafinger, E307-5

    M. Kariman:
    "Fluid Dynamic Investigation of an Alternative Extraction Steam Turbine Control Method: Rotary Valve";
    Supervisor, Reviewer: R. Willinger, M. Grafinger; Institut für Energietechnik und Thermodynamik, 2013; oral examination: 2013-04-08.

  36. Author: Jakob Karner, E307-3
    Other persons involved: Margit Gföhler, E307-3; Christian Peham

    J Karner:
    "Theory, Conception, and Design Towards a Passive Upper Limb Exoskeleton";
    Supervisor, Reviewer: M. Gföhler, C. Peham; 307, 2014; oral examination: 2014-09-08.

    More information

  37. Author: Jürgen Karner
    Other persons involved: Klaus Hoffmann, E307-1; Peter Kopacek, E325-6

    J. Karner:
    "Ein Beitrag zur Entwicklung von Sicherheitsbauteilen für Seilaufzüge";
    Supervisor, Reviewer: K. Hoffmann, P. Kopacek; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2006; oral examination: 2006-12-05.

  38. Author: Bernhard Kohlhauser, E308-GrMayrh
    Other persons involved: Paul Heinz Mayrhofer, E308-GrMayrh; Helmut Riedl, E308-GrMayrh; Ali Erdemir, ANL; Carsten Gachot, E307-3

    B. Kohlhauser:
    "Phase transformation derived protective effects of PVD coatings";
    Supervisor, Reviewer: P.H. Mayrhofer, H. Riedl, A. Erdemir, C. Gachot; E308, 2018; oral examination: 2018-12-17.

    More information

  39. Author: Martin Kuchler, E307-3
    Other persons involved: Margit Gföhler, E307-3; Felix Breitenecker, E101-03

    M. Kuchler:
    "Entwicklung eines biomechanischen Ersatzmodells zur Simulation der menschlichen Bewegung auf einem Ruderergometer - Das inverse und dsas direkte dynamische Problem";
    Supervisor, Reviewer: M. Gföhler, F. Breitenecker; E306, 2003.

  40. Author: Thomas Lässer, E325
    Other persons involved: Georg Kartnig, E307-1; Stefan Jakubek, E325-5

    T. Lässer:
    "Das dynamische Verhalten von Seilbahnfahrzeugen in Wechselwirkung mit der Dynamik der Seile";
    Supervisor, Reviewer: G. Kartnig, S. Jakubek; E307, E325, 2016; oral examination: 2016-11-29.

  41. Author: Olaf Lahayne, E202-02
    Other persons involved: Josef Eberhardsteiner, E202-02; Klaus Hoffmann, E307-1

    O. Lahayne:
    "Experimentelle Reibungsuntersuchungen und Modellrechnungen zum Verhalten von Reifenmaterialien";
    Supervisor, Reviewer: J. Eberhardsteiner, K. Hoffmann; Institut für Mechanik der Werkstoffe und Strukturen, 2007; oral examination: 2007-08-21.

  42. Author: Michael Lauermann, E302-1
    Other persons involved: Karl Ponweiser, E302-1; Franz Rauscher, E307-6

    M. Lauermann:
    "Pneumatic prestressed solar concentrator - thermal and optical analyses";
    Supervisor, Reviewer: K. Ponweiser, F. Rauscher; Institut für Energietechnik und Thermodynamik, 2015.

  43. Author: Sebastian Lichtenberger, E311-01-2
    Other persons involved: Burkhard Kittl, E311-01-3; Detlef Gerhard, E307-5

    S. Lichtenberger:
    "Entwicklung eines Modells zur Darstellung von Tracebilitydaten in Abhängigkeit von Tracebilityanwendungsfällen";
    Supervisor, Reviewer: B. Kittl, D. Gerhard; Institut für Fertigungstechnik und Hochleistungslasertechnik, 2016; oral examination: 2016-06-07.

  44. Author: Richard Ljuhar
    Other persons involved: Detlef Gerhard, E307-5; Fritz Bleicher, E311-01; Gert Reinauer, E307

    R. Ljuhar:
    "Informationsschutz in der Produktentwicklung - ein neuer Lösungsansatz auf Basis der Pseudonymisierung";
    Supervisor, Reviewer: D. Gerhard, F. Bleicher, G. Reinauer; E307, 2017; oral examination: 2017-06-29.

    More information

  45. Author: Andrea Lorenz, E325-5
    Other persons involved: Hanns Peter Jörgl, E325-5; Klaus Hoffmann, E307-1

    A. Lorenz:
    "Modellierung von Radlader-Kenngrößen mit Bayes´schen Netzen";
    Supervisor, Reviewer: H. Jörgl, K. Hoffmann; Institut für Mechanik und Mechatronik 325, 2008; oral examination: 2008-04-30.

    More information

  46. Author: Christoph Lutz, E307
    Other persons involved: Detlef Gerhard, E307-5; Sandor Vajna

    C. Lutz:
    "Rechnergestütztes Konfigurieren und Auslegen individualisierter Produkte - Rahmenwerk für die Konzeption und Einführung wissensbasierter Assistenzsysteme in die Konstruktion";
    Supervisor, Reviewer: D. Gerhard, S. Vajna; Institut für Konstruktionswissenschaften und Technische Logistik, 2011; oral examination: 2011-11-28.

    More information

  47. Author: Erich Machu
    Other persons involved: Laurenz Rinder, E307-3; Wladimir Linzer, E302-1

    E. Machu:
    "Ein verbessertes Modell zur Berechnung der Leistungsdaten von Hubkolbenverdichtern";
    Supervisor, Reviewer: L. Rinder, W. Linzer; Institut für allgemeine Maschinenlehre und Fördertechnik, 1989.

  48. Author: Johannes Moser
    Other persons involved: Laurenz Rinder, E307-3; Wladimir Linzer, E302-1

    J. Moser:
    "Die Wirkung des Einspritzöles in nasslaufenden Schraubenkompressoren";
    Supervisor, Reviewer: L. Rinder, W. Linzer; Institut für allgemeine Maschinenlehre und Fördertechnik, 1992.

  49. Author: Christoph Müller, E253-4
    Other persons involved: Manfred Berthold, E253-4; Margit Gföhler, E307-3; Kristina Schinegger, Univ.Prof. Innsbruck

    Christoph Müller:
    "Bewegende Architektur - Entwicklung interaktiver und adaptiver Architektur mittels selbst organisierenden Robotermodule";
    Supervisor, Reviewer: Manfred Berthold, M. Gföhler, Kristina Schinegger; Architektur und Entwerfen, Fakultät für Architektur und Raumplanung (TU Wien), Konstruktionswissenschaften und Technische Logistik, Fakultät für Bauingenieurwesen (TU Wien), Konstruktion und Gestaltung, Fakultät für Architektur (Uni Innsbruck), 2016; oral examination: 2016-12-16.

  50. Author: Hesamedin Ostad Ahmad Ghorabi, E307-2
    Other persons involved: Wolfgang Wimmer, E307-2; Andreas Windsperger, E166

    H. Ostad Ahmad Ghorabi:
    "Parametric Ecodesign - Development of a Framework for the Integration of Life Cycle Assessment into Computer Aided Design";
    Supervisor, Reviewer: W. Wimmer, A. Windsperger; Institut für Konstruktionswissenschaften und technische Logistik, 2010; oral examination: 2010-05-11.

    More information

  51. Author: Rainer Pamminger, E307-2
    Other persons involved: Wolfgang Wimmer, E307-2; Andreas Windsperger, E166

    R. Pamminger:
    "Design for Environment - systematischer Ansatz zur Integration von umweltrelevanten Anforderungen in den Produktentwicklungsprozess am Anwendungsbeispiel der Straßenbahn Valencia";
    Supervisor, Reviewer: W. Wimmer, A. Windsperger; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2011; oral examination: 2011-08-12.

  52. Author: Heimo Pascher, E330-02-1 [FhA, GB PL]
    Other persons involved: Wilfried Sihn, E330-02 [FHA, GB PL]; Georg Kartnig, E307-1; Michael Schenk

    H. Pascher:
    "Entwicklung einer Methode zur Quantifizierung von Kosten und Umweltauswirkungen in der automobilen Distributionslogistik";
    Supervisor, Reviewer: W. Sihn, G. Kartnig, M. Schenk; Inst. f. Managementwissenschaften; Inst. f. Konstruktionswissenschaften u. Technische Logistik; Otto-von Guericke-Universität Magdeburg, 2017; oral examination: 2017-11-06.

  53. Author: Anton Pirko, E307-1
    Other persons involved: Klaus Hoffmann, E307-1; Felix Breitenecker, E101-03

    A. Pirko:
    "Untersuchungen zur Gurtführung mit geregelten Schrägrollen";
    Supervisor, Reviewer: K. Hoffmann, F. Breitenecker; Institut für Konstruktionswissenschaften und Technische Logistik, 2006.

  54. Author: Michael Posch
    Other persons involved: Reinhard Willinger, E302-02; Klaus Hoffmann, E307-1

    M. Posch:
    "Numerische Untersuchung der Zweiphasenströmung in einem Gutaufgabeinjektor";
    Supervisor, Reviewer: R. Willinger, K. Hoffmann; Institut für Thermodynamik und Energiewandlung, 2006.

  55. Author: Gerhard Pramhas
    Other persons involved: Klaus Hoffmann, E307-1; Anke Pyzalla, E308-P

    G. Pramhas:
    "Betriebsfestigkeitsrechnung von kaltgeformten Bauteilen als Kombination von FKM-Methode und dem Konzept der wahren Spannungen in der Fördertechnik";
    Supervisor, Reviewer: K. Hoffmann, A. Pyzalla; Institut für Konstruktionswissenschaften und Technische Logistik, 2006.

  56. Author: Touba Rahmani, E307-5
    Other persons involved: Detlef Gerhard, E307-5; Madjid Fathi

    T. Rahmani:
    "Semantisches Wissensmanagement im Produktentstehungsprozess am Beispiel umweltgerechter Produktentwicklung";
    Supervisor, Reviewer: D. Gerhard, M. Fathi; Institut für Konstruktionswissenschaften und Technische Logistik, 2014; oral examination: 2014-10-20.

    More information

  57. Author: Werner Reichenfelser, E307-3
    Other persons involved: Margit Gföhler, E307-3; Peter Lugner, E325-1

    W. Reichenfelser:
    "Test- und Trainingsfahrrad für Personen mit Querschnittlähmung";
    Supervisor, Reviewer: M. Gföhler, P. Lugner; Institut f. Konstruktionswissenschaften und Technische Logistik, 2005.

    More information

  58. Author: Klemens Gregor Schulmeister, E325-5
    Other persons involved: Hanns Peter Jörgl, E325-5; Klaus Hoffmann, E307-1

    K Schulmeister:
    "Modellierung und Regelung des lateralen Laufverhaltens von Stahlprozessbändern";
    Supervisor, Reviewer: H. Jörgl, K. Hoffmann; 325A5, 2009; oral examination: 2009-06-08.

  59. Author: Zhen Shi
    Other persons involved: Carsten Gachot, E307-3; Lawrence Li

    Z. Shi:
    "Fabrication of Robust Hydrophobic Cerium Oxide Coatings by Magnetron Sputtering Technique";
    Supervisor, Reviewer: C. Gachot, L. Li; CityU Hong Kong, 2017; oral examination: 2017-08-09.

  60. Author: Thomas Sobottka, E330-02-1 [FHA, GB PL]
    Other persons involved: Wilfried Sihn, E330-02 [FHA, GB PL]; Detlef Gerhard, E307-5; Egon Müller, TU Chemnitz

    T. Sobottka:
    "Eine anwendungsorientierte simulationsbasierte Methode, unter Berücksichtigung von Energieeffizienz, in der optimierenden Planung von Produktion und Logistik";
    Supervisor, Reviewer: W. Sihn, D. Gerhard, E. Müller; Inst. f. Managementwissenschaften; Inst. f. Konstruktionswissenschaften u. Technische Logistik; TU Chemnitz, 2017; oral examination: 2017-12-18.

  61. Author: Tobias Clemens Staab, TU München
    Other persons involved: Johannes Fottner, TU München; Georg Kartnig, E307-1

    T. Staab:
    "Eine exakte Planungsmethode f. manuell bediente Lagersysteme m. mehereren Lagerbereichen";
    Supervisor, Reviewer: J. Fottner, G. Kartnig; Lehrstuhl f. Fördertechnik Materialfluss Logistik, 2019; oral examination: 2019-08-01.

  62. Author: Thomas Stöhr, TU Graz
    Other persons involved: Christian Landschützer; Georg Kartnig, E307-1

    T. Stöhr:
    "Steigerung der Energieeffizienz von Stückgutstetigförderern durch optimierte Antriebssytemauswahl";
    Supervisor, Reviewer: C. Landschützer, G. Kartnig; Institut f. Technische Logistik, TU Graz, 2018; oral examination: 2018-12-17.

  63. Author: Christoph Strasser, E307-2
    Other person involved: Bruno Grösel, E307-1

    C. Strasser:
    "Einsatz von Methoden in der Produktentwicklung - Ein Beitrag zur praxisgerechten Auswahl und Anwendung";
    Supervisor, Reviewer: B. Grösel; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2004.

  64. Author: Walter Struckl, E307-2
    Other persons involved: Wolfgang Wimmer, E307-2; Anton Stribersky, E307-1

    W. Struckl:
    "Green Line - Umweltgerechte Produktentwicklungsstrategien für Schienenfahrzeuge auf Basis der Lebenszyklusanalyse des Metrofahrzeuges Oslo";
    Supervisor, Reviewer: W. Wimmer, A. Stribersky; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2007; oral examination: 2007-11-23.

  65. Author: Roman Talla
    Other persons involved: Thomas Angeli, E307-3; Norbert Bachl

    R. Talla:
    "The influence of mechanical loading on bone after stroke and spinal cord injury";
    Supervisor, Reviewer: T. Angeli, N. Bachl; Institut für Sportwissenschaft der Universität Wien, 2007; oral examination: 2007-11-26.

  66. Author: Christoph Tmej
    Other persons involved: Hermann Haselbacher, E302-02; Klaus Hoffmann, E307-1

    C. Tmej:
    "Betriebsverhalten eines Brennstoffördersystems für direkt-holzstaubgefeuerte Gasturbinen";
    Supervisor, Reviewer: H. Haselbacher, K. Hoffmann; Institut für Thermische Turbomaschinen und Energieanlagen, 2001.

  67. Author: Dzemal Vazda, E307-6
    Other persons involved: Josef Zeman, E307-6; Karl Ponweiser, E302-1

    D. Vazda:
    "Instationäre Wärmespannungen in Rohren durch periodisch schwankenden Flüssigkeitsspiegel";
    Supervisor, Reviewer: J. Zeman, K. Ponweiser; Institut für Apparate- und Anlagenbau, 2002.

    More information

  68. Author: Wilhelm Wahler, E307-1
    Other persons involved: Bruno Grösel, E307-1; Felix Breitenecker, E101-03

    W. Wahler:
    "Reibschwingungen in Hubspindelgetrieben";
    Supervisor, Reviewer: B. Grösel, F. Breitenecker; Institut für Konstruktionslehre und Fördertechnik, 2002.

  69. Author: Michael Weigand, E307-3
    Other persons involved: Walter Raab; Karl-Heinz Kloos

    M. Weigand:
    "Untersuchung der Beanspruchungen von Paßfederverbindungen bei umlaufender Biegebelastung";
    Supervisor, Reviewer: W. Raab, K.-H. Kloos; Technische Hochschule Darmstadt, Fachgebiet Maschinenelemente und Mechanik, 1991.

    More information

  70. Author: Laurenz Weilguny
    Other persons involved: Detlef Gerhard, E307-5; Burkhard Kittl, E311-01-3

    L. Weilguny:
    "Fertigungsgerechte Produktgestaltung mittels integrierter Produkt- und Prozess-Features - Knowledge-based Engineering unter Einsatz von Feature-Technologie in der Automobilindustrie";
    Supervisor, Reviewer: D. Gerhard, B. Kittl; Institut für Konstruktionswissenschaften und Technische Logistik, 2009; oral examination: 2009-12-17.

    More information

  71. Author: Wolfgang Wimmer, E307-2
    Other persons involved: Bruno Grösel, E307-1; Gerold Patzak, E330-02-1

    W. Wimmer:
    "ECODESIGN Checklisten Methode";
    Supervisor, Reviewer: B. Grösel, G. Patzak; Betriebswissenschaften, Arbeitswissenschaft und Betriebswirtschaftslehre, 1999.

  72. Author: Franz Winter, E315
    Other persons involved: Ernst Pucher, E315; Laurenz Rinder, E307-3

    F. Winter:
    "Ein Beitrag zur Messung und objektiven Bewertung von Fahrkomfortkriterien in Personenkraftwagen";
    Supervisor, Reviewer: E. Pucher, L. Rinder; E315 Institut für Verbrennungskraftmaschinen und Kraftfahrzeugbau, 2003.

  73. Author: Christoph Zauner, AIT
    Other persons involved: René Hofmann, E302-01-2; Markus Haider, E302-1; Franz Rauscher, E307-6

    C. Zauner:
    "Development of Latent Heat Storages using Polymers as Phase Change Material for Applications in Industry, Solar Energy and Heat Networks";
    Supervisor, Reviewer: R. Hofmann, M. Haider, F. Rauscher; E302 - Institut für Energietechnik und Thermodynamik, 2019; oral examination: 2019-06-28.


Diploma and Master Theses (authored and supervised)


  1. Author: Georg Adamcik, E307-3
    Other person involved: Thomas Angeli, E307-3

    G. Adamcik:
    "Konzept, mechanische Konstruktion und Dimensionierung eines multifunktionellen Dynamometers, für die Anwendung in der Schwerelosigkeit";
    Supervisor: T. Angeli; 307/3, 2007; final examination: 2007.

    More information

  2. Author: Robert Attwenger, E307-2
    Other persons involved: Bruno Grösel, E307-1; Wolfgang Wimmer, E307-2

    R. Attwenger:
    "Der Assistent zum ECODESIGN PILOT Entwicklung eines Software-Tools für die zielgerichtete Empfehlung von ECODESIGN Strategien zur Produktverbesserung";
    Supervisor: B. Grösel, W. Wimmer; Institut für Konstruktionslehre und Fördertechnik, 2002.

  3. Author: Norbert Barta, E307-3
    Other person involved: Thomas Angeli, E307-3

    N. Barta:
    "eines Propriozeptionstrainingsgeräts für Rehabilitation und Leistungssport";
    Supervisor: T. Angeli; E 307-3, Institut für Konstruktionswissenschaften und Technische Logistik, 2006; final examination: 2006.

  4. Author: Mathias Bartl
    Other person involved: Georg Kartnig, E307-1

    M. Bartl:
    "Entwicklung eines Produktkonfigurators für die Statikberechnung von Hochregallagern";
    Supervisor: G. Kartnig; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2012; final examination: 2012-08-06.

  5. Author: Emir Benca
    Other person involved: Thomas Angeli, E307-3

    E. Benca:
    "Evaluierung von Labrum-Ref ixat ions techniken beim femoroacetabulären Impingement : Bio-FASTak® vs . PushLockTM";
    Supervisor: T. Angeli; E 307, 2011; final examination: 2011-05-25.

    More information

  6. Author: Aron Böhler
    Other person involved: Klaus Hoffmann, E307-1

    A. Böhler:
    "Intelligente Segmentaufteilung von Seilbahnstützen + CAD-Einbindung";
    Supervisor: K. Hoffmann; Institut für Konstruktionslehre und Fördertechnik, 2002.

  7. Author: Nikola Bojanic
    Other person involved: Margit Gföhler, E307-3

    N Bojanic:
    "Erstellung eines 3D-CAD Modells der unteren Extremitäten eines Kindes basierend auf Magnetresonanzaufnahmen";
    Supervisor: M. Gföhler; Maschinenelemente, 2004.

  8. Author: Christian Breuer-Ruesch, E307-3
    Other person involved: Thomas Angeli, E307-3

    C. Breuer-Ruesch:
    "Entwicklung eines chirurgischen Bohrwerkzeugs";
    Supervisor: T. Angeli; 307-3, 2008; final examination: 2008-11-25.

  9. Author: Michael Canori
    Other person involved: Bruno Grösel, E307-1

    M. Canori:
    "Eco Tram - Handlungsmaßnahmen zur Energieverbrauchssenkung für den Betrieb der Heiz-, Kühl- und Lüftungsgeräte am Straßenbahnfahrzeug ULF";
    Supervisor: B. Grösel; Institut für Konstruktionswissenschaften und Techgnische Logistik E 307, 2010; final examination: 2010-12-20.

  10. Author: Antoni Castells
    Other person involved: Georg Kartnig, E307-1

    A. Castells:
    "Simulation of cycle times and throughput of Shuttle Storage Systems";
    Supervisor: G. Kartnig; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2013.

  11. Author: Juan Antonio Castells Ramón, E307-3
    Other person involved: Margit Gföhler, E307-3

    J. Castells Ramón:
    "OBTAINING A 3D MODEL OF ATLAS AND THE THORAXICAL COLUMN IN HORSES";
    Supervisor: M. Gföhler; Konstruktionswissenschaften, 2005.

  12. Author: Viktor Clemens
    Other person involved: Georg Kartnig, E307-1

    V. Clemens:
    "Untersuchung der Methode METUS hinsichtlich des sinnvollen Einsatzes bei der Firma BLUM";
    Supervisor: G. Kartnig; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2011; final examination: 2011-10-12.

  13. Author: Klaus Decker
    Other person involved: Klaus Hoffmann, E307-1

    K. Decker:
    "Vergleichende Untersuchungen mit FUJI - Druckmessfolien und dem Tekscan - System zur Messung von Flächenpressungen an Seilrollen";
    Supervisor: K. Hoffmann; Institut für Konstruktionslehre und Fördertechnik, 2002.

  14. Author: Martin Dlabac, E307
    Other persons involved: Peter Hofmann, E315; Georg Klinglmayr, E315 [TU Wien]

    M Dlabac:
    "Experimentelle Untersuchung und Bewertung von Maßnahmen zur Steigerung des Wirkungsgrades eines Miller-Ottomotors";
    Supervisor: P. Hofmann, G. Klinglmayr; Forschungsbereich Maschinenbauinformatik und Virtuelle Produktentwicklung | Institut für Fahrzeugantriebe und Automobiltechnik, 2019; final examination: 2019-06-13.

    More information

  15. Author: Hannes Dragsits
    Other person involved: Klaus Hoffmann, E307-1

    H. Dragsits:
    "Untersuchung des Schwingungsverhaltens der Fahrbetriebsmittel einer Seilbahn - Anwendung genetischer Optimierungsverfahren";
    Supervisor: K. Hoffmann; Institut für Konstruktionslehre und Fördertechnik, 2002.

  16. Author: Florian Eder
    Other person involved: Margit Gföhler, E307-3

    F. Eder:
    "Hydrauliksysteme zur Dämpfung von Orthesen-Kniegelenken";
    Supervisor: M. Gföhler; Konstruktionswissenschaften und Technische Logistik, 2008; final examination: 2008.

  17. Author: Marko Emrich
    Other person involved: Georg Kartnig, E307-1

    M. Emrich:
    "Ermittlung des Reibwertes in der Trennfuge von Schraubverbindungen";
    Supervisor: G. Kartnig; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2012; final examination: 2012-03-26.

  18. Author: Christoph Erlacher
    Other persons involved: Klaus Hoffmann, E307-1; Klaus Decker, E307-1

    Ch. Erlacher:
    "Kurvengängige Gurtbandförderer - Berechnung des Bandverlaufes in der Kurve";
    Supervisor: K. Hoffmann, K. Decker; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2006.

  19. Author: Luis Fartaria
    Other persons involved: Georg Kartnig, E307-1; Andreas Fertin, E307-1; Thomas Gabmayer, E307-1

    L. Fartaria:
    "Energy systems for transportation technologies";
    Supervisor: G. Kartnig, A. Fertin, T. Gabmayer; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2011.

  20. Author: Thomas Feilmair
    Other persons involved: Michael Weigand, E307-3; Johannes Edelmann, E325-1

    T. Feilmair:
    "Lastdatengenerierung für die Auslegung von elektrischen PKW-Antrieben";
    Supervisor: M. Weigand, J. Edelmann; Institut für Konstruktionswissenschaften und Technische Logistik E307, 2017.

  21. Author: Reinhard Ferner
    Other person involved: Georg Kartnig, E307-1

    R. Ferner:
    "Entwicklung einer Seilbahnstütze aus Holz";
    Supervisor: G. Kartnig; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2013; final examination: 2013-04-30.

  22. Author: Martin Fuchs
    Other person involved: Margit Gföhler, E307-3

    M. Fuchs:
    "Osteochondrosis dissecans im Pferdesprunggelenk: eine Finite-Elemente Analyse";
    Supervisor: M. Gföhler; 307, 2014; final examination: 2014-12-10.

    More information

  23. Author: Livia Futter, E307
    Other persons involved: Margit Gföhler, E307-3; Christoph Janeczek, E307-3

    L. Futter:
    "Entwicklung einer Membran für einen intravenösen Katheter zur Kohlenstoffdioxidreduktion";
    Supervisor: M. Gföhler, C. Janeczek; 307, 2016; final examination: 2016-11-17.

  24. Author: Lukas Gammer, Studierender
    Other persons involved: Michael Weigand, E307-3; Peter Kral, E307-3

    L. Gammer:
    "Erprobung eines neuartigen Schmiersystems für Hubschrauber";
    Supervisor: M. Weigand, P. Kral; Institut für Konstruktionswissenschaften und Technische Logistik, 2016; final examination: 2016-10-03.

  25. Author: Florian Geschl, Studierender
    Other persons involved: Michael Weigand, E307-3; Peter Kral, E307-3

    F. Geschl:
    "Schraubenkräfte im Mehrschraubenverbund";
    Supervisor: M. Weigand, P. Kral; Institut für Konstruktionswissenschaften und Technische Logistik, 2009; final examination: 2009-07-13.

  26. Author: Margit Gföhler, E307-3
    Other person involved: Alfred Kluwick, E322

    M. Gföhler:
    "Pulsierende turbulente Rohrströmungen";
    Supervisor: A. Kluwick; Institut für Strömungslehre und Wärmeübertragung, 1991.

  27. Author: Martin Grösel, E307
    Other person involved: Margit Gföhler, E307-3

    M. Grösel:
    "Dreidimensionale Modellierung einer Pferdewirbelsäule basierend auf CT Scans";
    Supervisor: M. Gföhler; Konstruktionswissenschaften und Technische Logistik, 2008; final examination: 2008.

  28. Author: Peter Grohmann
    Other persons involved: Klaus Hoffmann, E307-1; Christoph Pillichshammer

    P. Grohmann:
    "Berechnung der Antriebsleistung sowie Optimierung von Bunkeraustragsschnecken";
    Supervisor: K. Hoffmann, C. Pillichshammer; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2009; final examination: 2009-09-28.

  29. Author: Hans-Christian Grosz
    Other person involved: Klaus Hoffmann, E307-1

    H. Grosz:
    "Adaptierung eines Bandförderprüfstandes für Messung mit räumlich verstellbarer Schrägrolle";
    Supervisor: K. Hoffmann; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2004.

  30. Author: Ingrid Hauer
    Other persons involved: Margit Gföhler, E307-3; Werner Reichenfelser, E307-3

    I. Hauer:
    "Instrumentierter Ruderergometer für Anwendung in Sport und Rehabilitation";
    Supervisor: M. Gföhler, W. Reichenfelser; Konstruktionswisenschaften und Technische Logistik, 2007; final examination: 2007-05.

  31. Author: Georg Havlicek
    Other persons involved: Georg Kartnig, E307-1; Andreas Fertin, E307-1

    G. Havlicek:
    "Untersuchung und Bewertung von innovativen Sekundärfederungskonzepten für Metrofahrzeuge";
    Supervisor: G. Kartnig, A. Fertin; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2012; final examination: 2012-02-15.

  32. Author: Markus Hinteregger, E307-3
    Other person involved: Reinhard Willinger, E302-02

    M. Hinteregger:
    "Numerische Simulation der Strömung in einem Gleichdruckturbinengitter";
    Supervisor: R. Willinger; Institut für Energietechnik und Thermodynamik, 2011; final examination: 2011-12-06.

  33. Author: Gisela Höflinger
    Other person involved: Margit Gföhler, E307-3

    G. Höflinger:
    "A sensitivity analysis of muscle forces and body mass accelerations during gait to changes of muscle parameters";
    Supervisor: M. Gföhler; Konstruktionswissenschaften und Technische Logistik, 2008; final examination: 2008.

  34. Author: Thomas Hofmann, E307-3
    Other persons involved: Margit Gföhler, E307-3; Heinz-Bodo Schmiedmayer, E325-1

    T. Hofmann:
    "Implementierung eines 3D-CAD-Modells einer Armorthese in die Biomechanik-Simulationssoftware OpenSim";
    Supervisor: M. Gföhler, H. Schmiedmayer; 307, 2013; final examination: 2013-01-28.

  35. Author: Sylvia Holzinger
    Other person involved: Georg Kartnig, E307-1

    S. Holzinger:
    "Durchführung des Wertanalyse-Projektes an der Sirocco Tunnelabluftklappe TRD";
    Supervisor: G. Kartnig; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2011; final examination: 2011-06-22.

  36. Author: Gerd Huber
    Other person involved: Klaus Hoffmann, E307-1

    G. Huber:
    "Adaptierung und Einsatz eines mobilen Messsystems zur Untersuchung des Schwingungsverhaltens an kuppelbaren Sesselbahnen";
    Supervisor: K. Hoffmann; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2008; final examination: 2008-03-26.

  37. Author: Maria Huber, E307-2
    Other person involved: Wolfgang Wimmer, E307-2

    M. Huber:
    "Ökologische Produktauszeichnung und ihr Einfluss auf nachhaltigen Konsum - Erarbeitung von Kriterien für umweltverträgliche Produkte als Bewertungsgrundlage und als Entscheidungshilfe für Konsumenten";
    Supervisor: W. Wimmer; Institut für Konstruktionswissenschaften und Technische Logistik, 2003.

  38. Author: Florentine Huber-Dangl, E307-3
    Other persons involved: Margit Gföhler, E307-3; Christoph Janeczek, E307-3

    F. Huber-Dangl:
    "Modification of the prototype production process of an intravascular gas exchange membrane catheter";
    Supervisor: M. Gföhler, C. Janeczek; 307/3, 2018; final examination: 2018-10-25.

  39. Author: Alexander Jagric
    Other person involved: Wolfgang Wimmer, E307-2

    A. Jagric:
    "Development of a method for the assessment of parts` resusability";
    Supervisor: W. Wimmer; Institut für Konstruktionswissenschaften und Technische lLgistik E 307, 2010.

  40. Author: Christoph Janeczek, E307-3
    Other persons involved: Margit Gföhler, E307-3; Reinhard Willinger, E302-02

    C. Janeczek:
    "Entwicklung der Fördereinheit einer Herzkatheterpumpe zur Unterstützung des linken Herzventrikels";
    Supervisor: M. Gföhler, R. Willinger; Konstruktionswissenschaften und Technische Logistik, 2012; final examination: 2012-11-09.

  41. Author: Markus Kahofer
    Other persons involved: Klaus Hoffmann, E307-1; Klaus Decker, E307-1; Thomas Gabmayer, E307-1

    M. Kahofer:
    "Entwicklung eines optischen Messsystems für einen Bandprüfstand";
    Supervisor: K. Hoffmann, K. Decker, T. Gabmayer; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2007; final examination: 2008-01-14.

  42. Author: Yusuf Kalkan
    Other person involved: Georg Kartnig, E307-1

    Y. Kalkan:
    "Entwicklung einer Versuchsanlage zur Kalibrierung von DEM-Modellen für Schüttgüter in der Fördertechnik";
    Supervisor: G. Kartnig; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2013; final examination: 2013-12-02.

  43. Author: Yakup Kalkan
    Other person involved: Georg Kartnig, E307-1

    Y. Kalkan:
    "Entwicklung und Inbetriebnahme eines Prüfstandes zur Messung von Seilbahnschwingungen";
    Supervisor: G. Kartnig; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2013; final examination: 2013-12-02.

  44. Author: Andreas Kampenhuber, E307-2
    Other persons involved: Wolfgang Wimmer, E307-2; Walter Struckl, E307-2

    A. Kampenhuber:
    "Entwicklung eines Entsorgungskonzeptes für Schienenfahrzeuge am Beispiel der Metro Oslo";
    Supervisor: W. Wimmer, W. Struckl; Institut für Konstruktionswissenschaften und Technische Logistik, 2006.

  45. Author: Jakob Karner, E307-3
    Other person involved: Margit Gföhler, E307-3

    J Karner:
    "Entwicklung eines kapazitiven Daumensensors zur Detektion taktiler Signale der Michelangelo 03 Handprothese";
    Supervisor: M. Gföhler; Konstruktionswissenschaften und Technische Logistik, 2009.

  46. Author: Karl Norbert Kiniger
    Other persons involved: Klaus Hoffmann, E307-1; Klaus Decker, E307-1

    K. Kiniger:
    "Normgerechte Bemessung von Aluminiumleichtkransystemen";
    Supervisor: K. Hoffmann, K. Decker; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2009; final examination: 2009-04-28.

  47. Author: Ludwig H. Kleiser
    Other person involved: Bruno Grösel, E307-1

    L. Kleiser:
    "Entwicklung einer klappbaren Reisegitarre - von der Idee zum Prototyp";
    Supervisor: B. Grösel; Institut für Konstruktionslehre und Fördertechnik, 2003.

  48. Author: Carina Klimitsch
    Other person involved: Margit Gföhler, E307-3

    C. Klimitsch:
    "Validierung Einer Automatischen, Computerunterstützten 4-Marker-Ganganalyse";
    Supervisor: M. Gföhler; 307/3, 2018; final examination: 2018-03-09.

  49. Author: Andreas Koller
    Other person involved: Georg Kartnig, E307-1

    A. Koller:
    "Konzipierung eines mobilen Container-Umsetzers: Hubsystem und Containeraufnahme";
    Supervisor: G. Kartnig; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2012; final examination: 2012-09-27.

  50. Author: Joachim Kornauth
    Other person involved: Georg Kartnig, E307-1

    J. Kornauth:
    "Entwicklung von korrosionsgeschützten Radiallagerungen für die Klappenblätter einer Tunnelabluftklappe";
    Supervisor: G. Kartnig; Institut für Konstruktionswissenschaften und Technische logistik E 307, 2010; final examination: 2010-10-29.

  51. Author: Martin Kuchler, E307-3
    Other person involved: Klaus Hoffmann, E307-1

    M. Kuchler:
    "Untersuchungen zum dynamischen Verhalten des Antriebsstranges eines Schmiedemanipulators";
    Supervisor: K. Hoffmann; Institut für Konstruktionslehre und Fördertechnik, 2001.

  52. Author: Florian Lackenbauer
    Other person involved: Klaus Hoffmann, E307-1

    F. Lackenbauer:
    "Entwicklung eines Weideschritt-Simulators für Pferde";
    Supervisor: K. Hoffmann; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2008; final examination: 2008-04-16.

  53. Author: Alexander Lang
    Other person involved: Georg Kartnig, E307-1

    A. Lang:
    "Konzipierung eines mobilen Container-Umsetzers: Führungssystem und Schlitten";
    Supervisor: G. Kartnig; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2012; final examination: 2012-11-28.

  54. Author: Cornelia Lawall
    Other person involved: Margit Gföhler, E307-3

    C. Lawall:
    "Entwicklung eines Programms zur Berechnung der grundlegenden Gangparameter mittels kinematischer Daten aus einer 4-Marker Ganganalyse";
    Supervisor: M. Gföhler; Institut für Konstruktionswissenschaften und Technische Logistik, 2014; final examination: 2014-01-28.

    More information

  55. Author: Christioph Lechleitner
    Other person involved: Klaus Hoffmann, E307-1

    C. Lechleitner:
    "Druckverlaufs- und Positionsmessungen an Kompressionsschnecken";
    Supervisor: K. Hoffmann; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2009; final examination: 2009-07-15.

  56. Author: Christian Lejhanec
    Other person involved: Georg Kartnig, E307-1

    C. Lejhanec:
    "Konstruktion eines Sicherungsgerätes für Kletterhallen";
    Supervisor: G. Kartnig; Institut für konstruktionswissenschaften und Technische Logistik E 307, 2011.

  57. Author: Markus Lombardini
    Other person involved: Thomas Angeli, E307-3

    M. Lombardini:
    "Zu Ursachen und Quantifizierung der Knieachseninstabilität beim Laufen";
    Supervisor: T. Angeli; UNI Wien, 2008; final examination: 2008-11-18.

  58. Author: Kilian Ludwiczek
    Other person involved: Georg Kartnig, E307-1

    K. Ludwiczek:
    "Konzepte für zukünftige Mittelarmlehnen im PKW-Interieur";
    Supervisor: G. Kartnig; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2012; final examination: 2012-06-27.

  59. Author: Helmut Mad, E307-3
    Other person involved: Margit Gföhler, E307-3

    H. Mad:
    "Zusammenhang zwischen Massenschwerpunkt und Angriffspunkt der resultierenden Bodenreaktionskraft beim Gehen im medizinischen Kontext";
    Supervisor: M. Gföhler; Konstruktionswissenschaften und Technische Logistik, 2007; final examination: 2007-11-21.

  60. Author: Christoph Makovec
    Other persons involved: Margit Gföhler, E307-3; Werner Reichenfelser, E307-3

    Ch. Makovec:
    "Rollstuhl-Trainingsgerät für Querschnittgelähmte";
    Supervisor: M. Gföhler, W. Reichenfelser; Konstruktionswissenschaften und Technische Logistik, 2009.

  61. Author: Inko Marcaide
    Other person involved: Margit Gföhler, E307-3

    I Marcaide:
    "Design of a FES Rowing Ergometer";
    Supervisor: M. Gföhler; 307/3, 2005.

  62. Author: Gregor Maurer
    Other person involved: Klaus Hoffmann, E307-1

    G. Maurer:
    "Labortest und Feldeinsatz eines mobilen Messsystems zur Beurteilung des Querwindverhaltens von Zweiseilumlaufbahnen";
    Supervisor: K. Hoffmann; Institut für Konstruktionslehre und Fördertechnik, 2002.

  63. Author: Stephan Mayr
    Other person involved: Klaus Hoffmann, E307-1

    S. Mayr:
    "Verteilung der Seitenkräfte (Windkräfte) aus den angrenzenden Spannfeldern auf die Seilrollen der Rollenbatterien von Einseilumlaufbahnen";
    Supervisor: K. Hoffmann; Institut für Konstruktionslehre und Fördertechnik, 2003.

  64. Author: Christoph Messner
    Other person involved: Margit Gföhler, E307-3

    C. Messner:
    "Development of a Hand Exoskeleton";
    Supervisor: M. Gföhler; Konstruktionswissenschaften und Technische Logistik, 2011; final examination: 2011-06-22.

  65. Authors: Mario Metzler; Stefan Kaindlbauer
    Other person involved: Georg Kartnig, E307-1

    M. Metzler, S. Kaindlbauer:
    "Entwicklung eines Mehrweggebindes für Statorstäbe";
    Supervisor: G. Kartnig; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2010.

  66. Author: Thomas Miltner
    Other person involved: Wolfgang Wimmer, E307-2

    T. Miltner:
    "Ermittlung des Potentials zur Steigerung der Energieeffizienz eines Metro-Schienenfahrzeuges durch Optimierung der Wärmedämmungseigenschaften des Wagenkastens";
    Supervisor: W. Wimmer; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2009; final examination: 2009-04-16.

  67. Author: Thomas Moser
    Other person involved: Bruno Grösel, E307-1

    Th. Moser:
    "Behälterumschlagsysteme des Kombinierten Verkehrs am Knotenpunkt Schiene/Straße und Schiene/Schiene";
    Supervisor: B. Grösel; Institut für Konstruktionslehre und Fördertechnik, 2002.

  68. Author: Clemens Ortmayr, Studierender
    Other persons involved: Michael Weigand, E307-3; Peter Kral, E307-3

    C. Ortmayr:
    "Entwicklung eines Prüfstands für Freiläufe";
    Supervisor: M. Weigand, P. Kral; Institut für Konstruktionswissenschaften und Technische Logistik, 2016; final examination: 2016-06-09.

  69. Author: Hesamedin Ostad Ahmad Ghorabi, E307-2
    Other person involved: Wolfgang Wimmer, E307-2

    H. Ostad Ahmad Ghorabi:
    "Ecodesign- Decision- Boxes for a Systematic Integration of Environmental Considerations into the Product Development";
    Supervisor: W. Wimmer; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2005.

    More information

  70. Author: Rainer Pamminger, E307-2
    Other persons involved: Bruno Grösel, E307-1; Wolfgang Wimmer, E307-2

    R. Pamminger:
    "ECODESIGN-QFD-PILOT - Systematischer Ansatz zur kundenorientierten Entwicklung umwelt- und marktgerechter Produkte";
    Supervisor: B. Grösel, W. Wimmer; Institut für Konstruktionslehre und Fördertechnik, 2003.

  71. Author: Alexander Papay
    Other person involved: Thomas Angeli, E307-3

    A. Papay:
    "Vergleich von Leistungssportlern und Leistungsportlerinnen anhand von ausgewählten biomechanischen Parametern mit Hilfe eines optoelektronischen Messverfahrens in Kombination mit einer Mehrkomponenten Messplattform";
    Supervisor: T. Angeli; Institut für Sportwissenschaft der Universität Wien, 2007; final examination: 2007-11-28.

  72. Author: Pierre Paschinger, E307-3
    Other person involved: Roland Feil, TU München

    P. Paschinger:
    "Analyse der Betriebsfestigkeit von Getriebestrukturen eines koaxialen Ultraleicht-Hubschraubers mit variabler Rotordrehzahl";
    Supervisor: R. Feil; Lehrstuhl für Hubschraubertechnologie, 2015; final examination: 2015-09-28.

    More information

  73. Author: Michal Peceny
    Other person involved: Klaus Hoffmann, E307-1

    M. Peceny:
    "Rechnerischer Nachweis der Standsicherheit von Seitenstaplern";
    Supervisor: K. Hoffmann; Institut für Konstruktionswissenschaften und Technische Logistik, 2006.

  74. Author: Thomas Piff
    Other person involved: Georg Kartnig, E307-1

    T. Piff:
    "Durchführung einer CE-Zertifizierung und Belastungstests an einem neu entwickelten Transportgebinde";
    Supervisor: G. Kartnig; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2011; final examination: 2011-11-22.

  75. Author: Mathias Wolfgang Pleyer, Studierender
    Other persons involved: Peter Kral, E307-3; Michael Jirout

    M. Pleyer:
    "Analyse verschiedener Wischerarme für Züge";
    Supervisor: P. Kral, M. Jirout; Konstruktionswissenschaften und Technische Logistik, 2016; final examination: 2016-12-14.

  76. Author: Christoffer Pölz
    Other persons involved: Klaus Hoffmann, E307-1; Klaus Decker, E307-1

    Ch. Pölz:
    "Vergleichende Genauigkeitsuntersuchungen zur Kalibrierung des Tekscan - Sensors";
    Supervisor: K. Hoffmann, K. Decker; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2006.

  77. Author: Vasil Popov
    Other persons involved: Zeeshan Ahmed; Detlef Gerhard, E307-5

    V. Popov:
    "Advanced User Interface Technology for Intelligent Semantic Oriented Agent Based Search (I-SOAS)";
    Supervisor: Z. Ahmed, D. Gerhard; Institute for Engineering Design and Logistic Engineering Vienna University of Technology, and Technical University-Sofia, Bulgaria, 2009.

  78. Author: Markus Puchinger, E307-3
    Other persons involved: Margit Gföhler, E307-3; Werner Reichenfelser, E307-3

    M. Puchinger:
    "Entwicklung eines mobilen motorisierten Arm-Exoskeletts";
    Supervisor: M. Gföhler, W. Reichenfelser; Konstruktionswissenschaften und Technische Logistik, 2015; final examination: 2015-04-16.

  79. Author: Gjelbrim Qafleshi
    Other person involved: Wolfgang Wimmer, E307-2

    G. Qafleshi:
    "Optimierung der Luftführung eines Gerätes zur Bekämpfung der Varroamilbe durch Hyperthermie";
    Supervisor: W. Wimmer; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2011; final examination: 2011-07-11.

  80. Author: Christian Redl
    Other person involved: Margit Gföhler, E307-3

    Ch. Redl:
    "Eine Sensitivitätsanalyse von Muskelkräften in einem Inversen Gangmodell";
    Supervisor: M. Gföhler; Konstruktionswissenschaften, 2005.

  81. Author: Stephan Reinthaler
    Other person involved: Klaus Hoffmann, E307-1

    S. Reinthaler:
    "Einfluss der Fördergurtherstellung auf den Geradlauf des Stahlseil-Fördergurtes";
    Supervisor: K. Hoffmann; Institut für konstruktionswissenschaften und Technische Logistik E 307, 2010; final examination: 2010-03-24.

  82. Author: Jakob Reuther
    Other person involved: Margit Gföhler, E307-3

    J. Reuther:
    "Application of Circuit Theory on Modeling of Lower Leg Muscles";
    Supervisor: M. Gföhler; Konstruktionswissenschaften und Technische Logistik, 2014; final examination: 2014-02-28.

    More information

  83. Author: Holger Riebling
    Other person involved: Wolfgang Wimmer, E307-2

    H. Riebling:
    "Vorschläge zur Reduzierung des Standby-Stromverbrauchs von externen Netz- und Ladeteilen unter Berücksichtigung ausgewählter Patente";
    Supervisor: W. Wimmer; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2007; final examination: 2008-01-14.

  84. Author: Evgueni Savov
    Other person involved: Klaus Hoffmann, E307-1

    E. Savov:
    "Ermittlung von auftretenden Axialkräften in Kompressionschnecken in Abhängigkeit von Schneckendesign und Antriebsmoment";
    Supervisor: K. Hoffmann; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2004.

  85. Author: Stefan Schamberger
    Other person involved: Georg Kartnig, E307-1

    S. Schamberger:
    "Die Wirkung von Sand auf den Reibwert zwischen Rad und Schiene";
    Supervisor: G. Kartnig; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2013; final examination: 2013-06-13.

  86. Author: Marko Schefberger, E164-03-1
    Other persons involved: Christian Edtmaier, E164-03-1; Carsten Gachot, E307-3

    M. Schefberger:
    "Ortsaufgelöste Untersuchung der Abbaumechanismen beim Hammerbohren auf Armierungsstahl";
    Supervisor: C. Edtmaier, C. Gachot; Institut für Chemische Technologien und Analytik, 2019; final examination: 2019-04-29.

  87. Author: Dieter Schmid
    Other person involved: Georg Kartnig, E307-1

    D. Schmid:
    "Projektierung und Durchführung einer Wertanalyse";
    Supervisor: G. Kartnig; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2012; final examination: 2012-10-22.

  88. Author: Maria-Elisabeth Schmidt, E307-3
    Other persons involved: Margit Gföhler, E307-3; Werner Reichenfelser, E307-3

    M. Schmidt:
    "Überlegungen zur Entwicklung eines magnetorheologischen Dämpfers für eine Ellbogenorthese";
    Supervisor: M. Gföhler, W. Reichenfelser; 307, 2010; final examination: 2010-08-02.

  89. Author: Stefan Schmollgruber
    Other persons involved: Michael Weigand, E307-3; Peter Kral, E307-3

    S. Schmollgruber:
    "Standarderstellung im Konstruktionsprozess sowie in Auslegungs- und Berechnungsmodellen von diversen Bauteilen/Bauteilgruppen bis hin zur Entwicklung von KTM-Normen";
    Supervisor: M. Weigand, P. Kral; Institut für Konstruktionswissenschaften und Technische Logistik, 2008; final examination: 2008.

    More information

  90. Author: Matthias Schwendinger
    Other person involved: Klaus Hoffmann, E307-1

    M. Schwendinger:
    "Zentrierung der Transportebenen einer Fahrtreppe";
    Supervisor: K. Hoffmann; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2006; final examination: 2006-11-30.

  91. Author: Florian Stadler, E307-3
    Other persons involved: Margit Gföhler, E307-3; Markus Puchinger, E307-3

    F. Stadler:
    "Entwicklung eines Sensorgriffes zur Erfassung der auftretenden Kräfte an der Hand bei der Benutzung eines alternativen Rollstuhlantriebssystems";
    Supervisor: M. Gföhler, M. Puchinger; Konstruktionswissenschaften und Technische Logistik, 2015; final examination: 2015-01-29.

  92. Author: Klaus Stadlmann
    Other persons involved: Margit Gföhler, E307-3; Werner Reichenfelser, E307-3

    K. Stadlmann:
    "Entwicklung einer Orthese zur Unterstützung und Messung des Momentenverlaufes des Sprunggelenkes in der Rehabilitation";
    Supervisor: M. Gföhler, W. Reichenfelser; Konstruktionswissenschaften und Technische Logistik, 2008; final examination: 2008.

  93. Author: Florian Stallforth, E315
    Other persons involved: Michael Weigand, E307-3; Peter Kral, E307-3

    F. Stallforth:
    "Entwurf eines innovativen Lastschaltgetriebes";
    Supervisor: M. Weigand, P. Kral; Konstruktionswissenschaften und Technische Logistik, 2008; final examination: 2008.

    More information

  94. Author: Michael Steinböck
    Other person involved: Georg Kartnig, E307-1

    M. Steinböck:
    "Vergleichende Analyse der Schweißnahtberechnung am Beispiel ausgewählter Schweißkonstruktionen in Papiermaschinen";
    Supervisor: G. Kartnig; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2011; final examination: 2011-06-22.

  95. Author: Lorenz Steinwender
    Other person involved: Bruno Grösel, E307-1

    L. Steinwender:
    "A Systematic Approach to Logistics Simulations of Rolling Plants by use of the Software Package ProModel TM";
    Supervisor: B. Grösel; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2006.

  96. Author: Christoph Stingeder, E307-3
    Other person involved: Margit Gföhler, E307-3

    C Stingeder:
    "3 dimensional modelling of the lower limb from children with cerebral palsy and healthy children based on MRI - data";
    Supervisor: M. Gföhler; Konstruktionswissenschaften und Technische Logistik, 2009.

  97. Author: Thomas Stojanovic, E307
    Other persons involved: Margit Gföhler, E307-3; Markus Puchinger, E307-3

    T. Stojanovic:
    "Entwicklung universeller Montage- und Sperrmöglichkeiten einer Armorthese";
    Supervisor: M. Gföhler, M. Puchinger; 307, 2016; final examination: 2016-02-25.

  98. Author: Walter Struckl, E307-2
    Other person involved: Wolfgang Wimmer, E307-2

    W. Struckl:
    "ECODESIGN Metro Pilot - Anpassung des Ecodesign Software Tools zur umweltgerechten Produktgestaltung von Metrofahrzeugen";
    Supervisor: W. Wimmer; Institut f. Konstruktionswissenschaften und Technische Logistik E 307, 2004.

  99. Author: Roksana Suszek, E307-3
    Other persons involved: Margit Gföhler, E307-3; Christoph Janeczek, E307-3

    R. Suszek:
    "Entwicklung einer Mikroturbine als Antriebseinheit in einem intravenösen Katheter";
    Supervisor: M. Gföhler, C. Janeczek; 307, 2016; final examination: 2016-10-25.

  100. Author: Brigitte Swoboda, E307
    Other persons involved: Margit Gföhler, E307-3; Jakob Karner, E307-3

    B. Swoboda:
    "Gewichtskompensierende Armorthese";
    Supervisor: M. Gföhler, J Karner; Konstruktionswissenschaften und Technische Logistik, 2011; final examination: 2011-06-20.

  101. Author: Franz Szecsenyi
    Other person involved: Klaus Hoffmann, E307-1

    F. Szecsenyi:
    "Bunkeraustrag mittels Förderschnecken - Praxisgerechte Berechnung der Antriebsleistung für Bunkeraustragschnecken";
    Supervisor: K. Hoffmann; Institut für Konstruktionswissenschaften und Technische Logistik E307, 2008; final examination: 2008-07-07.

  102. Author: Stefan Tober
    Other persons involved: Klaus Hoffmann, E307-1; Roland Himmelbauer, E307-1

    St. Tober:
    "Möglichkeiten und Grenzen der Infrarot-Thermografie bei der Untersuchung des Rad- Schiene- Kontakts";
    Supervisor: K. Hoffmann, R. Himmelbauer; Institut für Konstruktionswissenschaften und Technische Logistik, 2006.

  103. Author: Michael Trully
    Other person involved: Georg Kartnig, E307-1

    M. Trully:
    "Konzipierung eines mobilen Container-Umsetzers: Trägerantrieb, Niveauregulierung und Gesamtkonzept";
    Supervisor: G. Kartnig; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2012; final examination: 2012-11-28.

  104. Author: Tamás Varga
    Other person involved: Klaus Hoffmann, E307-1

    T. Varga:
    "Auslegung von luftgestützten Förderbändern";
    Supervisor: K. Hoffmann; Institut für Konstruktionslehre und Fördertechnik, 2003.

  105. Author: Wilfried Wieser
    Other person involved: Klaus Hoffmann, E307-1

    W. Wieser:
    "Untersuchung der Längsdynamik der Fahrzeuge beim Durchfahren der Beschleunigungs-/Verzögerungsstrecke von kuppelbaren Zweiseilumlaufbahnen mittels MKS Programm ADAMS";
    Supervisor: K. Hoffmann; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2005.

  106. Author: Franz Winkler
    Other persons involved: Margit Gföhler, E307-3; Harald Hackl

    F. Winkler:
    "Messung des EMG-Signals an Beinmuskeln während der Elektrostimulation";
    Supervisor: M. Gföhler, H. Hackl; Institut für Konstruktionswissenschaften und Technische Logistik, 2006; final examination: 2006-04-28.

  107. Author: Roland Erich Winkler
    Other person involved: Klaus Hoffmann, E307-1

    R. Winkler:
    "Simulation von Bunkeraustragschnecken mit Diskreter Elemente Methode (DEM)";
    Supervisor: K. Hoffmann; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2010; final examination: 2010-11-25.

  108. Author: Alfred Wondracek
    Other person involved: Georg Kartnig, E307-1

    A. Wondracek:
    "Erstellung eines Programms zur Dimensionierung von Bunker und Abzugsband";
    Supervisor: G. Kartnig; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2010.

  109. Author: Bernhard Zak
    Other person involved: Thomas Angeli, E307-3

    B. Zak:
    "Evaluierung verschiedener Operationsmethoden zur Rekonstruktion des vorderen Kreuzbandes";
    Supervisor: T. Angeli; 307/3, 2007; final examination: 2007.

  110. Author: Michael Zbieszczyk
    Other person involved: Klaus Hoffmann, E307-1

    M. Zbieszczyk:
    "Die Längsdynamik von Pendelbahnen bei Tragseilbremsung";
    Supervisor: K. Hoffmann; Institut für Konstruktionswissenschaften und Technische Logistik E 307, 2009; final examination: 2009-04-22.


Scientific Reports


  1. Authors: Thomas Angeli, E307-3; Norbert Barta, E307-3; Georg Adamcik, E307-3

    T. Angeli, N. Barta, G. Adamcik:
    "Einmal Mars und zurück?";
    Report for Bulletin; 2007; 3 pages.

    More information

  2. Author: Klaus Decker, E307-1

    K. Decker:
    "Alternative Konzepte zum bestehenden Doka DekLift";
    Report for Doka Industrie GmbH; 2010; 12 pages.

  3. Author: Klaus Decker, E307-1

    K. Decker:
    "Festigkeitsanalyse eines Geschwindigkeitsbegrenzers und einer Spannvorrichtung eines Personenaufzuges";
    2011; 23 pages.

  4. Author: Klaus Decker, E307-1

    K. Decker:
    "Festigkeitsnachweis einer Bremsfangvorrichtung";
    Report for Wittur GmbH; 2010; 40 pages.

  5. Author: Klaus Decker, E307-1

    K. Decker:
    "Statische Analyse einer Pusherkonstruktion";
    Report for MVA Metallverarbeitung GmbH; 2010; 28 pages.

  6. Author: Klaus Decker, E307-1

    K. Decker:
    "Statische Festigkeitsanalyse einer Fangvorrichtung und der dazugehörigen Synchronisationeinheit für einen Personenaufzug";
    2011; 68 pages.

  7. Authors: Klaus Decker, E307-1; Thomas Gabmayer, E307-1

    K. Decker, T. Gabmayer:
    "Ermittlung von Kalibrierkurven für FUJI-Druckmessfolien unter langer Belastungsdauer";
    Report for ALSTOM Hydro (Switzerland) Ltd; 2010; 15 pages.

  8. Authors: Klaus Decker, E307-1; Thomas Gabmayer, E307-1; Markus Schneider, E307-1

    K. Decker, T. Gabmayer, M. Schneider:
    "Bestimmung der Zugscherfestigkeiten von Überlappungsklebungen gemäß DIN EN 1465";
    Report for Frey Wille GmbH & Co. KG; 2010; 17 pages.

  9. Authors: Klaus Decker, E307-1; Thomas Gabmayer, E307-1; Markus Schneider, E307-1

    K. Decker, T. Gabmayer, M. Schneider:
    "Messung der Flächenpressung in einem Versuchsblock eines Hydrogenerators";
    Report for ALSTOM Hydro (Switzerland) Ltd; 2010; 31 pages.

  10. Authors: Klaus Decker, E307-1; Klaus Hoffmann, E307-1

    K. Decker, K. Hoffmann:
    "Wittur Guideline Safety Factor - Calculation Examples";
    Report for Wittur Holding GmbH; 2010; 423 pages.

  11. Authors: Klaus Decker, E307-1; Klaus Hoffmann, E307-1

    K. Decker, K. Hoffmann:
    "Wittur Guideline Safety Factor - Indroduction";
    Report for Wittur Holding GmbH; 2008; 30 pages.

  12. Authors: Klaus Decker, E307-1; Klemens Gregor Schulmeister, E325-5

    K. Decker, K Schulmeister:
    "Statische Analyse des Verschub- und Auflagerahmens der Anlage WS04";
    Report for Integral-Montage Anlagen- und Rohrtechnik GmbH; 2010; 28 pages.

  13. Authors: Thomas Gabmayer, E307-1; Markus Schneider, E307-1

    T. Gabmayer, M. Schneider:
    "Messungen der Flächenpressung in einem Rotor-Blechpaket eines Hydrogenerators I";
    Report for ALSTOM Hydro (Switzerland) Ltd.; 2010; 105 pages.

  14. Authors: Thomas Gabmayer, E307-1; Markus Schneider, E307-1

    T. Gabmayer, M. Schneider:
    "Messungen der Flächenpressung in einem Rotor-Blechpaket eines Hydrogenerators II";
    Report for ALSTOM Hydro (Switzerland) Ltd.; 2010; 105 pages.

  15. Authors: Bruno Grösel, E307-1; Klaus Decker, E307-1

    B. Grösel, K. Decker:
    "Machbarkeitsuntersuchung zur automatischen KFZ-Verladung";
    Report for ÖBB-Personenverkehr AG; 2007; 36 pages.

  16. Author: Harald Hackl, E307-3

    H. Hackl:
    "Optimierung des Antriebsstrangs (Getriebe und Antriebswellen) von Hubschrauber- / UAV- Drohnen (UAV = Unmanned Aerial Vehicle)";
    Report for Wirtschaftskammer Wien - Endbericht Wirtschaftskammerpreis 2010; 2011; 5 pages.

    More information

  17. Authors: Klaus Hoffmann, E307-1; Klaus Decker, E307-1; Thomas Gabmayer, E307-1

    K. Hoffmann, K. Decker, T. Gabmayer:
    "Untersuchung des Mülleintragsystems";
    Report for INTEGRAL Engineering und Umwelttechnik GmbH; 2007; 62 pages.

  18. Authors: Klaus Hoffmann, E307-1; Klaus Decker, E307-1; Thomas Gabmayer, E307-1; Klemens Gregor Schulmeister, E325-5; Martin Kozek, E325-5

    K. Hoffmann, K. Decker, T. Gabmayer, K Schulmeister, M. Kozek:
    "Laufverhalten und Regelung von Edelstahl-Prozessbändern";
    Report for Österreichische Forschungsförderungsgesellschaft mbH, Sensengasse 1, 1090 Wien; Report No. 1, 2007; 11 pages.

  19. Authors: Klaus Hoffmann, E307-1; Thomas Gabmayer, E307-1; Markus Schneider, E307-1

    K. Hoffmann, T. Gabmayer, M. Schneider:
    "Messungen der Verformungen zwischen Stahlkonstruktion und Fundament an der Windkraftanlage V13975";
    Report for Windpark Mönchhof GmbH; 2008; 45 pages.

  20. Authors: Klaus Hoffmann, E307-1; Thomas Gabmayer, E307-1; Markus Schneider, E307-1

    K. Hoffmann, T. Gabmayer, M. Schneider:
    "Messungen der Verformungen zwischen Stahlkonstruktion und fundament an der Windkraftanlage V17303";
    Report for Windpark Simonsfeld GmbH & CoKG; 2008; 47 pages.

  21. Authors: Klaus Hoffmann, E307-1; Thomas Gabmayer, E307-1; Markus Schneider, E307-1

    K. Hoffmann, T. Gabmayer, M. Schneider:
    "Messungen der Verformungen zwischen Stahlkonstruktion und Fundament an der windkraftanlage V17687";
    Report for Raiffeisen Windpark GmbH; 2009; 50 pages.

  22. Authors: Klaus Hoffmann, E307-1; Thomas Gabmayer, E307-1; Markus Schneider, E307-1

    K. Hoffmann, T. Gabmayer, M. Schneider:
    "Messungen der Verformungen zwischen Stahlkonstruktion und Fundament an der Windkraftanlage V17690";
    Report for Raiffeisen Windpark GmbH; 2010; 47 pages.

  23. Authors: Klaus Hoffmann, E307-1; Thomas Gabmayer, E307-1; Markus Schneider, E307-1

    K. Hoffmann, T. Gabmayer, M. Schneider:
    "Messungen der Verformungen zwischen Stahlkonstruktion und Fundament an der Windkraftanlage V17961";
    Report for Windpark Gols GmbH; 2008; 47 pages.

  24. Authors: Klaus Hoffmann, E307-1; Thomas Gabmayer, E307-1; Markus Schneider, E307-1

    K. Hoffmann, T. Gabmayer, M. Schneider:
    "Radlastmessungen an der Zahnraddampflokomotive Z12 der Schafbergbahn";
    Report for Salzburg AG; 2008; 155 pages.

  25. Authors: Christine Jasch, IÖW; Barbara Hammerl, Joanneum Research; Mark Hammer, SERI; Rainer Pamminger, E307-2; Ingrid Kaltenegger, Joanneum Research; Fritz Hinterberger, SERI; Wolfgang Wimmer, E307-2; G Hrauda, IÖW

    C. Jasch, B. Hammerl, M. Hammer, R. Pamminger, I. Kaltenegger, F. Hinterberger, W. Wimmer, G. Hrauda:
    "Leuchttürme für industrielle Produkt-Dienstleistungssysteme - Potentialerhebung in Europa und Anwendbarkeit in Österreich";
    Report No. 15/2006, 2006; 175 pages.

    More information

  26. Authors: Georg Kartnig, E307-1; Michael Weigand, E307-3; Thomas Gabmayer, E307-1; Thomas Radler, E307-1; Markus Schneider, E307-1

    G. Kartnig, M. Weigand, T. Gabmayer, T. Radler, M. Schneider:
    "Überprüfung des an der Antriebstrommel angreifenden Moments eines Pipe-Conveyors";
    Report for FLSmidth Koch GmbH; 2010; 24 pages.

  27. Authors: Peter Kral, E307-3; Harald Hackl, E307-3

    P. Kral, H. Hackl:
    "Assessment of two 15kW Straight Bevel Gears";
    Report for Schindler Fahrtreppen International GmbH, R&D-MEC-CT; Report No. 2016/1, 2016; 21 pages.

  28. Authors: Peter Kral, E307-3; Harald Hackl, E307-3; Laurenz Rinder, E307-3

    P. Kral, H. Hackl, L. Rinder:
    "Beurteilung und Vergleich der relevanten Leistungsdaten von drei bauähnlichen Schneckengetrieben am Prüfstand im Laborversuch";
    Report for Firma Schindler, Aufzüge und Fahrtreppen AG; 2006; 32 pages.

  29. Authors: Peter Kral, E307-3; Harald Hackl, E307-3; Laurenz Rinder, E307-3

    P. Kral, H. Hackl, L. Rinder:
    "Beurteilung und Vergleich der relevanten Leistungsdaten von drei bauähnlichen Schneckengetrieben am Prüfstand im Laborversuch";
    Report for Schindler Fahrtreppen International GmbH, Quality Management Escalators and Moving Walks; Report No. 3, 2008; 32 pages.

  30. Authors: Peter Kral, E307-3; Harald Hackl, E307-3; Laurenz Rinder, E307-3

    P. Kral, H. Hackl, L. Rinder:
    "Schalluntersuchungen an einem Hubkolbenkompressor mit Lamellenventilen";
    Report for Firma Hörbiger; 2004.

  31. Authors: Peter Kral, E307-3; Harald Hackl, E307-3; Michael Weigand, E307-3

    P. Kral, H. Hackl, M. Weigand:
    "Assessment and Comparison of a 22-kW Straight Bevel Gear at two different lubricating conditions";
    Report for Schindler Fahrtreppen International GmbH, Quality Management Escalators and Moving Walks; 2011; 18 pages.

    More information

  32. Authors: Peter Kral, E307-3; Harald Hackl, E307-3; Michael Weigand, E307-3

    P. Kral, H. Hackl, M. Weigand:
    "Assessment and Comparison of three Straight Bevel Gears";
    Report for Schindler Fahrtreppen International GmbH, Quality Management Escalators and Moving Walks; 2011; 19 pages.

    More information

  33. Authors: Peter Kral, E307-3; Harald Hackl, E307-3; Michael Weigand, E307-3

    P. Kral, H. Hackl, M. Weigand:
    "Assessment and Comparison of two similar Straight Bevel Gears";
    Report for Schindler Fahrtreppen International GmbH, Quality Management Escalators and Moving Walks; 2011; 18 pages.

    More information

  34. Authors: Peter Kral, E307-3; Harald Hackl, E307-3; Michael Weigand, E307-3

    P. Kral, H. Hackl, M. Weigand:
    "Assessment of a 7,5 kW Strait Bevel Gear";
    Report for Schindler Fahrtreppen International GmbH, Quality Management Escalators and Moving Walks; 2012; 15 pages.

    More information

  35. Authors: Peter Kral, E307-3; Harald Hackl, E307-3; Michael Weigand, E307-3

    P. Kral, H. Hackl, M. Weigand:
    "Fracture Test on a 22 kW Straight Bevel Gear";
    Report for Schindler Fahrtreppen International GmbH, Quality Management Escalators and Moving Walks; 2011; 8 pages.

    More information

  36. Authors: Peter Kral, E307-3; Harald Hackl, E307-3; Michael Weigand, E307-3

    P. Kral, H. Hackl, M. Weigand:
    "Fracture Tests on Straight Bevel Gears";
    Report for Schindler Fahrtreppen International GmbH, Quality Management Escalators and Moving Walks; 2011; 10 pages.

    More information

  37. Authors: Peter Kral, E307-3; Michael Weigand, E307-3

    P. Kral, M. Weigand:
    "Bearing design of the drive shafts of four 15 kW, 2-stage Bevel-Helical Gearboxes";
    Report for Schindler Eskalatory Dunajska Streda, Quality Management Escalators and Moving Walks SED; 2015; 9 pages.

    More information

  38. Authors: Rainer Pamminger, E307-2; Wolfgang Wimmer, E307-2; Roland Winkler, E307-2

    R. Pamminger, W. Wimmer, R. Winkler:
    "Entwicklung von Kriterien zur Kommunikation der Energieeffizienz von Kunststoff verarbeitenden Maschinen";
    Report No. 5/2010, 2010; 138 pages.

    More information

  39. Authors: Franz Rauscher, E307-6; Mulu Bayray, E307-6

    F. Rauscher, M Bayray:
    "Weld Defect in a Pressure Vessel Investigation of Acoustic Emission during Pressure Tests and Pressure Cycling";
    2005; 78 pages.

    More information

  40. Authors: Laurenz Rinder, E307-3; Harald Hackl, E307-3; Christian Thalhammer; Martin Kuchler, E307-3; Rudolf Berger, E307-3

    L. Rinder, H. Hackl, C. Thalhammer, M. Kuchler, R. Berger:
    "Versuchsläufe mit einem einstufigen Kältemittel-Schraubenverdichter für den Einsatz als Hochdruck-Startluftverdichter";
    Report for AVL List GmbH; 2001.

  41. Authors: Laurenz Rinder, E307-3; Martin Kuchler, E307-3

    L. Rinder, M. Kuchler:
    "Wärmedehnungsmessungen an Schraubenkompressorrotoren";
    Report for WTZ-Österreich-Tschechien Projekt Nr. 2004/11 zwischen der Westböhmischen Universität Pilsen und der Technischen Universität Wien; 2005.

  42. Authors: Laurenz Rinder, E307-3; Martin Kuchler, E307-3; Harald Hackl, E307-3

    L. Rinder, M. Kuchler, H. Hackl:
    "Versuchsläufe mit einem Schneckengetriebe in Hinblick auf Wirkungsgrad, Verschleiß und Temperaturen";
    Report for Schindler Aufzüge und Fahrtreppen AG; 2002.

  43. Authors: Michael Weigand, E307-3; Armin Renneisen

    M. Weigand, A. Renneisen:
    "Paßfederbeanspruchungen";
    Report for Forschungsvereinigung Antriebstechnik (FVA), Frankfurt am Main; Report No. 317, 1990.

  44. Authors: Wolfgang Wimmer, E307-2; Maria Huber, E307-2; Carina Novotny, E307-2; Lorant Pinter, E307-2

    W. Wimmer, M. Huber, C. Novotny, L. Pinter:
    "Sustainable Product Report Austria 2009 - Entwicklung von Kriterien zur Quantifizierung  ökonomischer und sozialer Auswirkungen  von Produkten ";
    2010; 66 pages.

    More information

  45. Authors: Wolfgang Wimmer, E307-2; Peter Judmaier, E307-2; Maria Huber, E307-2; Rainer Pamminger, E307-2

    W. Wimmer, P. Judmaier, M. Huber, R. Pamminger et al.:
    "Konzeption eines ECODESIGN Lernspiels für Schulen und Jugendorganisationen";
    Report No. 43/2008, 2008; 183 pages.

    More information

  46. Authors: Wolfgang Wimmer, E307-2; Rainer Pamminger, E307-2; Roland Winkler, E307-2

    W. Wimmer, R. Pamminger, R. Winkler:
    "Energiedienstleistung zur Steigerung der Energieeffizienz von Spritzgießmaschinen im Kunststoffbereich";
    Report No. 55/2010, 2009; 110 pages.

    More information


Participations in Exhibitions without Catalogue


  1. Authors: Manfred Berthold, E253-4; Margit Gföhler, E307-3; Christoph Müller, E253-4

    Manfred Berthold, M. Gföhler, Christoph Müller:
    "Bewegende Architektur";
    Group exhibition; organised by: experimonde | Die Welt des Experiments, Seidengasse 18, Wien, 2016-12-16 - 2016-12-21.