Publication list for members of
E311 - Institute of Production Engineering and Photonic Technologies
as authors or essentially involved persons
2335 records (1979 - 2022)
The complete list of publications of the Faculty of Mechanical and Industrial Engineering is available from the publication database beginning with the publication year 2002. The database may but need not necessarily contain publications dated earlier than 2002.
Books and Book Editorships
-
S. Adamczak, P.H. Osanna (ed.):
"SCIENCE REPORT Computer-Aided Systems for Manufacture and Measurement of Machine Elements";
Wydawnictwo,
Kielce, PL,
2003,
ISBN: 83-88906-30-5;
320 pages.
-
S. Adamczak, P.H. Osanna (ed.):
"SCIENCE REPORT Measuring Technology in Advanced Machine Manufacturing Systems";
Wydawnictwo,
Kielce, PL,
2004,
ISBN: 83-88906-65-8;
252 pages.
-
A. Afjehi-Sadat, M.N. Durakbasa, P.H. Osanna (ed.):
"Proceedings of III. International Congress of Precision Machining - ICPM 2005";
Abteilung für Austauschbau und Messtechnik, TU Wien,
Wien,
2005,
ISBN: 3-901-888-31-4;
372 pages.
-
G. Altmütter:
"Beschreibung der Werkzeug-Sammlung des k.k. polytechnischen Institutes";
in series "Neuauflage des Originals von 1825",
series editor: F. Bleicher;
issued by: Bleicher Friedrich;
new academic press Wien,
Wien,
2016,
ISBN: 978-3-7003-1977-1,
282 pages.
-
T. Bednar, F. Bleicher, F. Dür, K. Eder, T. Flatz, B. Heinzl, W. Kastner, K. Kiesel, I. Kovacic, I. Leobner, K. Orehounig, K. Ponweiser, L. Waltenberger, D. Wiegand, S. Emrich:
"Roadmap für Energieeffiziente Fertigungsbetriebe";
Konsortium Projekt INFO,
Wien,
2013,
66 pages.
More information
-
F. Bleicher (ed.):
"Adaptive and Smart Manufacturing";
new academie press,
Wien,
2016,
ISBN: 978-3-7003-1976-4;
220 pages.
-
F. Bleicher:
"Parallelkinematische Werkzeugmaschinen";
Neuer wissenschaftlicher Verlag,
Wien,
2003,
ISBN: 3-7083-0118-8;
318 pages.
-
F. Bleicher, J. Kopac, L.W. Meyer, V. Stich (ed.):
"HPM - High Performance Manufacturing";
accepted by Institut für Fertigungstechnik
Wien,
2008,
ISBN: 978-3-200-01355-1;
256 pages.
-
F. Bleicher, K. Lammer (ed.):
"Industrie 4.0 - die intelligente Fabrik der Zukunft";
Klein Publishing GmbH,
Wien,
2014,
ISBN: 978-3-903015-00-5;
432 pages.
-
F. Bleicher, M. Obermair (ed.):
"Die Zukunft der Fertigungstechnik - Tagungsband Wiener Produktionstechnik Kongress 2012";
Neuer Wissenschaftlicher Verlag GmbH Nfg KG,
Wien - Graz,
2012,
ISBN: 978-3-7083-0872-2;
123 pages.
-
F.J. Brunner, K. Wagner, K. Matyas, P.H. Osanna:
"Taschenbuch Qualitätsmanagement";
Carl Hanser Verlag,
München,
1999,
ISBN: 3-446-21118-7;
323 pages.
-
I. Budak, J. Hodolic, I. Besic, D. Vukelic, P.H. Osanna, M.N. Durakbasa (ed.):
"Coordinate Measuring Machines And Cad-Inspection - Koordinatne Merne Masine I Cad Inspekcia";
Fakultet tehnickih nauka,
Novi Sad,
2009,
ISBN: 978-86-7892-195-7;
144 pages.
-
L. Crisan, M.N. Durakbasa, M. Tripa, G. Pop (ed.):
"SpecificaŢii Geometrice Ale Produselor -Geometrical Product Specifications-";
U.T. Press,
Cluj-Napoca,
2019,
ISBN: 978-606-737-399-8;
135 pages.
-
J. Duda, I. Kuric, B. Katalinic (ed.):
"Proceedings of the 5th DAAAM International Workshop "CA Systems and Technologies", ";
DAAAM International Vienna,
Vienna,
2000,
ISBN: 3-901509-16-x.
-
M.N. Durakbasa, G. Gencyilmaz (ed.):
"Digital Conversion on the Way to Industry 4.0, Selected Papers from ISPR2020, September 24-26, 2020, Turkey";
Springer International Publishing,
Cham, Switzerland, ISSN 2195-4356,
2021,
ISBN: 978-3-030-62783-6;
1018 pages.
-
M.N. Durakbasa, G. Gencyilmaz (ed.):
"Digitizing Production Systems - Selected Papers from ISPR2021, October 07-09, 2021";
Springer Nature Switzerland AG,
Cham, Switzerland,
2022,
ISSN: 2195-4356;
893 pages.
-
M.N. Durakbasa, G. Gencyilmaz (ed.):
"Proceedings of the International Symposium for Production Research 2018";
Springer International Publishing AG,
2019,
ISBN: 978-3-319-92266-9;
963 pages.
-
M.N. Durakbasa, G. Gencyilmaz (ed.):
"Proceedings of the International Symposium for Production Research 2019, Part of the Lecture Notes Mechanical Engineering book series (LNME) ISSN: 2195-4356";
Springer Nature Switzerland AG,
Springer Nature Switzerland AG, Cham,
2019,
ISBN: 978-3-030-31342-5;
853 pages.
More information
-
M.N. Durakbasa, P.H. Osanna, A. Afjehi-Sadat (ed.):
"XVI IMEKO WORLD CONGRESS IMEKO 2000 PROCEEDINGS VOLUME I Abstracts and Plenary Papers";
Abteilung Austauschbau und Messtechnik,
Wien,
2000,
ISBN: 3-901888-03-9;
442 pages.
-
M.N. Durakbasa, P.H. Osanna et al. (ed.):
"XVI IMEKO WORLD CONGRESS IMEKO 2000 PROCEEDINGS Vol. 8: Topic 14: Measurement of geometrical quantities, Topic 25: Quality management";
IMEKO,
Abteilung Austauschbau und Messtechnik, Wien,
2000,
ISBN: 3-901888-10-1.
-
M.N. Durakbasa, P.H. Osanna, W. Wehrmann, A. Afjehi-Sadat (ed.):
"XVI IMEKO WORLD CONGRESS IMEKO 2000 PROCEEDINGS VOLUME IV Topic 4 - Measurement of Electrical Quantities";
Abteilung für Austauschbau und Messtechnik, TU Wien,
Wien,
2000,
ISBN: 3-901888-06-3;
340 pages.
-
Ch. Habersohn:
"Einlegegerät für Drehmaschinen; Auslegung, Konstruktion und Berechnung";
VDM Verlag,
Deutschland,
2010,
ISBN: 978-3-8364-5388-2;
96 pages.
-
G. Humenberger:
"Anwendung des Laserhobelns zur Gesenkreparatur von Druckgussformen";
AV Akademikerverlag,
Deutschland,
2013,
ISBN: 978-3-639-48970-5;
114 pages.
More information
-
B. Katalinic (ed.):
"Annals of DAAAM for 2003 & Proceedings ";
DAAAM International Vienna,
Wien,
2003,
ISBN: 3-901-509-34-8;
564 pages.
-
B. Katalinic (ed.):
"Annals of DAAAM for 2004 & Proceedings of the 15th International Manufacturing & Automation: Globalisation- Technology - Men - Nature";
DAAAM International Vienna,
Wien,
2004,
ISBN: 3-901509-42-9;
518 pages.
-
B. Katalinic (ed.):
"Annals of DAAAM for 2005 & Proceedings";
DAAAM International Vienna,
Vienna,
2005,
ISBN: 3-901509-46-1;
414 pages.
-
B. Katalinic (ed.):
"Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, practice and Education"";
DAAAM International Vienna,
Wien,
2009,
ISBN: 978-3-901509-70-4;
2060 pages.
-
B. Katalinic:
"Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions""";
in series "Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions"",
series editor: B. Katalinic;
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2010,
ISBN: 978-3-901509-73-5,
1694 pages.
-
B. Katalinic (ed.):
"Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: Power of Knowledge and Creativity"";
DAAAM International Vienna,
Wien,
2011,
ISBN: 978-3-901509-83-4;
1782 pages.
-
B. Katalinic (ed.):
"Annals of DAAAM for 2012 & Proceedings of the 23rd International DAAAM Symposium "Make Harmony between Technology and Nature, and Your Mind will Fly as a BIrd"";
DAAAM International Vienna,
Wien,
2012,
ISBN: 978-3-901509-91-9;
1183 pages.
-
B. Katalinic (ed.):
"Annals of DAAAM International for 1998 & Proceedings of the 9th International DAAAM Symposium, 22-24th October 1998, Cluj-Napoca, Romania";
DAAAM International Vienna,
Vienna,
1998,
ISBN: 3-901509-08-9;
595 pages.
-
B. Katalinic (ed.):
"Annals of DAAAM International for 1999 & Proceedings of the 10th International DAAAM Symposium, 21-23rd October 1999, Vienna, Austria";
DAAAM International Vienna,
Vienna,
1999,
ISBN: 3-901509-10-0;
636 pages.
-
B. Katalinic (ed.):
"Annals of DAAAM International for 2000 & Proceedings of the 11th International DAAAM Symposium, 19-21st October 2000, Opatija, Croatia";
DAAAM International Vienna,
Vienna,
2000,
ISBN: 3-901509-13-5;
548 pages.
-
B. Katalinic (ed.):
"Annals of DAAAM International for 2001 & Proceedings of the 12th International DAAAM Symposium, 24-27th October 2001, Jena, Germany";
DAAAM International Vienna,
Vienna,
2001,
ISBN: 3-901509-19-4;
578 pages.
-
B. Katalinic (ed.):
"Annals of DAAAM International for 2002 & Proceedings of the 13th International Symposium "Intelligent Manufacturing & Automation"";
DAAAM International Vienna,
Vienna,
2002,
ISBN: 3-901509-29-1;
676 pages.
-
B. Katalinic:
"Covic D.: Invention of Team";
DAAAM International Vienna & Universtiy of Mostar,
Vienna - Mostar,
2003,
3-901-509-25-4;
240 pages.
-
B. Katalinic (ed.):
"DAAAM International Scientific Book 2002";
DAAAM International Vienna,
Vienna,
2002,
ISBN: 3-901509-30-5;
713 pages.
-
B. Katalinic (ed.):
"DAAAM International Scientific Book 2003";
DAAAM International Vienna,
Wien,
2003,
ISBN: 3-901-509-36-4;
646 pages.
-
B. Katalinic (ed.):
"DAAAM International Scientific Book 2004";
DAAAM International Vienna,
Wien,
2004,
ISBN: 3-901509-38-0;
722 pages.
-
B. Katalinic (ed.):
"DAAAM International Scientific Book 2005";
DAAAM International Vienna,
Vienna,
2005,
ISBN: 3-901509-43-7;
720 pages.
-
B. Katalinic:
"DAAAM International Scientific Book 2009";
in series "DAAAM Internations Scientific Book 2009",
series editor: B. Katalinic;
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2009,
ISBN: 978-3-901509-69-8,
1004 pages.
-
B. Katalinic (ed.):
"DAAAM International Scientific Book 2010";
DAAAM International Vienna,
Wien,
2010,
ISBN: 978-3-901509-74-2;
808 pages.
-
B. Katalinic (ed.):
"DAAAM International Scientific Book 2011";
DAAAM International Vienna,
Wien,
2011,
ISBN: 978-3-901509-84-1;
642 pages.
-
B. Katalinic (ed.):
"Decision Making under Risk";
DAAAM International Vienna,
Wien,
2004,
ISBN: 3-901509-44-5;
86 pages.
-
B. Katalinic:
"Industrieroboter und flexible Fertigungssysteme für Drehteile";
VDI Verlag GmbH,
Düsseldorf,
1990,
ISBN: 3-18-401027-9;
182 pages.
-
B. Katalinic:
"International Journal of Advanced Robotic Systems Volume 1, Number 1";
in series "International Journal of Advanced Robotic Systems",
series editor: B. Katalinic;
issued by: Wien;
DAAAM International Vienna,
Wien,
2004, (invited),
57 pages.
-
B. Katalinic (ed.):
"Proceedings of 7th DAAAM International Symposium "Product & Manufacturing: Integration, Flexibility, Intelligence", 17-19th October 1996";
DAAAM International Vienna,
Vienna,
1996,
ISBN: 3-901509-02-x;
526 pages.
-
B. Katalinic (ed.):
"Proceedings of 8th DAAAM International Symposium "Intelligent Manufacturing & Automation, 23-25th October 1997, Dubrovnik, Croatia";
DAAAM International Vienna,
Vienna,
1997,
ISBN: 3-901509-04-6;
412 pages.
-
B. Katalinic (ed.):
"Proceedings of International Symposium "Automation and Metrology", 5th November 1990, Vienna, Austria";
DAAAM International Vienna,
Vienna,
1990,
159 pages.
-
B. Katalinic (ed.):
"Proceedings of International Symposium "Flexible and Intelligent Automation", 4-6th November 1992, Budapest, Hungary";
DAAAM International Vienna,
Vienna,
1992,
211 pages.
-
B. Katalinic, B. Buchmeister:
"International Journal of Simulation Modelling";
in series "International Journal of Simulation Modelling IJSIMM",
series editor: B. Katalinic;
issued by: Wien;
DAAAM International Vienna,
Wien,
2019,
ISSN: 1726-4529,
199 pages.
-
B. Katalinic, B. Buchmeister:
"International Journal of Simulation Modelling Volume 4 Number 1";
in series "International Journal of Simulation Modelling IJSIMM",
series editor: B. Katalinic;
issued by: Wien;
DAAAM International Vienna,
Wien,
2005,
47 pages.
-
B. Katalinic, M. Kljajin (ed.):
"Proceedings of the 1st DAAAM International Conference: Advanced Technologies for the Developing Countries - ATDC-02";
DAAAM International Vienna & Strossmayer University of Osijek - Faculty of Mechanical Engineering, Slavonski Brod,
Vienna,
2002,
ISBN: 3-901509-32-1;
548 pages.
-
B. Katalinic, M. Kljajin, I Budic (ed.):
"Proceedings of the 4th DAAAM International Conference on Advanced Technologies for Developing Countries";
DAAAM International Vienna,
Slavonski Brod,
2005,
ISBN: 953-6048-29-9;
701 pages.
-
B. Katalinic, H. Osanna (ed.):
"Proceedings of International Symposium "Man, Technique, Enviroment", 16-18th September 1993, Brno, Czech Republic";
DAAAM International Vienna,
Vienna,
1993,
408 pages.
-
B. Katalinic, H. Osanna, J. Balic, F. Cus (ed.):
"Proceedings of 5th DAAAM International Symposium "Automation und Metrology: Challange and Chance", 26-29th October 1994, Maribor, Slovenia";
DAAAM International Vienna,
Vienna,
1994,
535 pages.
-
B. Katalinic, P.H. Osanna, J. Gawlik (ed.):
"Proceedings of 6th DAAAM International Symposium "Intelligent Manufacturing Systems", Oktober 26-28, 1995, Krakow, Poland";
DAAAM International Vienna,
Vienna,
1995,
ISBN: 3-901509-01-1;
404 pages.
-
B. Katalinic, D. Tufekcic, R. Selo (ed.):
"Proceedings of the 2nd DAAAM Internationa Conference on Advanced Technologies for Developing Countries";
DAAAM International Vienna & University of Tuzla,
Vienna,
2003,
ISBN: 3-901-509-35-6;
463 pages.
-
B. Katalinic, I. VEza, B. Bilic (ed.):
"Proceedings of the 3rd DAAAM International Conference on Advanced Technologies for Development Countries";
DAAAM International Vienna & University of Split,
Vienna-Split,
2004,
ISBN: 953-6114-68-2;
442 pages.
-
B. Katalinic, E. Wessely (ed.):
"Proceedings of the 4th Workshop "Human Factor and Environmentalist", 5th December 2002, Kosice, Slovakia";
DAAAM International Vienna,
Vienna,
2002,
ISBN: 3-901509-37-2;
122 pages.
-
I. Kuric, B. Katalinic (ed.):
"Proceedings of the 4th DAAAM International Workshop "CA Systems and Technologies: Advanced Methodology of Process Planning"", 12-13th October 1999, Zilina, Slovak Republic";
DAAAM International Vienna,
Vienna,
1999,
ISBN: 3-901509-12-7.
-
I. Kuric, B. Katalinic (ed.):
"Proceedings of the 6th DAAAM International Workshop "CA Systems and Technologies", 25-26th September 2001, Sulov, Slovak Republic";
DAAAM International Vienna,
Vienna,
2001,
ISBN: 3-901509-27-5.
-
V. Majstorovic, M.N. Durakbasa (ed.):
"Proceedings of the 12th International Conference on Measurement and Quality Control - Cyber Physical Issue IMEKO TC 14 2019 - Part of the Lecture Notes in Mechanical Engineering book series (LNME)";
Springer International Publishing,
Cham : Springer International Publishing Springer Nature Switzerland AG,
2019,
ISBN: 978--3-030-18176-5;
342 pages.
-
V. Majstorovic, B. Katalinic, D. Covic, V. Visekruna (ed.):
"Proceedings of the 2nd International Conference Business Systems Management - UPS 2001, University of Mostar, Mostar, 2002-05-31 2002-06-02";
DAAAM International Vienna & Universtiy of Mostar,
Vienna,
2001,
ISBN: 3-901509-26-7;
333 pages.
-
V. Majstorovic, B. Katalinic, D. Covic, V. Visekruna (ed.):
"Proceedings of the 3rd International Conference UPS 2004 Business Systems Management";
DAAAM International Vienna & Universtiy of Mostar,
Vienna - Mostar,
2004,
ISBN: 3-901509-24-0;
303 pages.
-
P.H. Osanna, M.N. Durakbasa, A. Afjehi-Sadat (ed.):
"Quality in Industry";
Abteilung für Austauschbau und Messtechnik, TU Wien,
Wien,
2004,
ISBN: 3-901888-23-3;
147 pages.
-
P.H. Osanna, M.N. Durakbasa et al. (ed.):
"CIM Ein Schlagwort unter der Lupe";
WUV Universitätsverlag,
Wien,
1991,
ISBN: 3851140648;
258 pages.
-
J. Papstel, B. Katalinic (ed.):
"Proceedings of the 1st International Conference of DAAAM National Estonia, 25 - 27th September 1997, Tallinn Technical University, Estonia";
DAAAM International Vienna,
Vienna,
1997,
ISBN: 3-901509-07-0.
-
J. Papstel, B. Katalinic (ed.):
"Proceedings of the 2nd International Conference of DAAAM National Estonia " Industrial Engineering - Activities Targeted to SME";
Tallinn Technical University,
Tallinn,
2000,
ISBN: 9985-894-21-9.
-
J. Papstel, B. Katalinic (ed.):
"Proceedings of the 3rd International Conference of DAAAM National Estonia "Industrial Engineering - New Challenges to SME";
DAAAM National Estonia & Tallinn Technical University,
Tallinn,
2002,
ISBN: 9985-59-272-7;
267 pages.
-
J. Papstel, B. Katalinic (ed.):
"Proceedings of the 4th International Conference Industrial Engineering - New Challenges to SME";
DAAAM International Vienna & DAAAM National Estonia,
Tallinn,
2004,
ISBN: 9985-894-59-6;
301 pages.
-
F. Puschitz:
"Kalibrieren von Werkzeugmaschinen mit Parallelkinematik";
SVH - Südwestdeutscher Verlag für Hochschulschriften,
Saarbrücken,
2011,
ISBN: 978-3-8381-2354-7;
207 pages.
More information
-
B. Ullmann, G. Artner, I. Hahn, P. Hans, H. Krebs, P. Eder-Neuhauser, R. Zemann (ed.):
"Proceedings VSS 2016 - Vienna young Scientists Symposium";
Book of Abstracts, Dipl.Ing. Heinz A. Krebs,
2352 Gumpoldskirchen,
2016,
ISBN: 978-3-9504017-2-1;
128 pages.
More information
-
K. Velisek, B. Katalinic (ed.):
"VÝROBNÉ SYSTÉMY I.";
Slovenská Technická Univerzita v Bratislave,
Bratislava,
2004,
ISBN: 80-227-2009-7;
209 pages.
-
E. Wessely, B. Katalinic (ed.):
"Proceedings of the 2nd Workshop "Intelligent Manufacturing Systems", Technical University of Kosice, Slovakia, 2001-11-29";
DAAAM International Vienna,
Vienna,
2001,
ISBN: 3-901509-18-6;
93 pages.
-
R. Zemann, A. Grill, I. Hahn, H. Krebs, A. Mayr, P. Eder-Neuhauser, B. Ullmann (ed.):
"Proceedings VSS 2015 - Vienna young Scientists Symposium";
Book of Abstracts, Dipl.Ing. Heinz A. Krebs,
2352 Gumpoldskirchen,
2015,
ISBN: 978-3-9504017-07;
182 pages.
Publications in Scientific Journals
-
S. Adamczak, J. Świderski, T. Dobrowo, M.N. Durakbasa:
"Application of MSA analysis for the evaluation of instruments for measuring the surface texture / Zastosowanie analizy MSA do oceny przyrządów do pomiaru struktury geometrycznej powierzchni /";
Mechanik,
1
(2018),
5-6;
434
- 436.
More information
-
S. Adamczak, M. Wrzochal, M.N. Durakbasa:
"Evaluation of a Non-Contact Method for Measuring Vibration of Rolling Bearings in Industrial Conditions";
Mechanik,
Vol. 93
(2020),
2;
8
- 11.
More information
-
A. Afjehi-Sadat, M.N. Durakbasa, P.H. Osanna, Y. D. Samarawickrama, K.J. Stout:
"Quality Control in bio-medicine and bio-engineering through application of sophisticated production metrology";
Elektronika,
I
(2005),
10;
46
- 50.
-
V. Agrez, F. Bammer, B. Podobnik, R. Petkovsek:
"Influence of the retardation of the multiplexing element in a dual channel Q-switched laser";
Applied Physics B - Lasers and Optics,
112
(2013),
1;
73
- 81.
More information
-
F. Akhavei, F. Bleicher, G. Pöchgraber:
"Chefsache Industrie 4.0: Jedem zweiten Unternehmen fehlt Digitalisierungsstrategie";
Wirtschaftszeit (invited),
22. Mai 2017
(2017).
-
F. Akhavei, F. Bleicher, G. Pöchgraber:
"Digitalisierung: Jedem zweiten Unternehmen fehlt Strategie";
trend.at,
22. Mai 2017
(2017),
8155970.
-
F. Akhavei, F. Bleicher, G. Pöchgraber:
"Hälfte der österreichischen Unternehmen fehlt digitaler Masterplan";
CASH (invited),
23. Mai 2017
(2017),
economie.
-
F. Akhavei, F. Bleicher, G. Pöchgraber:
"Lieferkette mit digitalen Lücken";
DiePresse.com (invited),
21. Mai 20107
(2017),
5220755.
-
F. Akhavei, F. Bleicher, G. Pöchgraber:
"Lieferketten nicht bereit für Industrie 4.0";
monitor.at (invited),
16. Mai 2017
(2017),
17274.
-
F. Akhavei, F. Bleicher, G. Pöchgraber:
"Studie der TU Wien: Jedem zweiten Unternehmen fehlt Digitalisierungsstrategie";
Computerwelt (invited),
1
(2017),
120820;
1 pages.
-
F. Akhavei, F. Bleicher, G. Pöchgraber:
"TU-Studie: Österreichs Industrie fehlt Digitalisierungsstrategie";
ots.at (invited),
22. Mai 2017
(2017),
20170522_OTS0040.
-
R. Alcoberro, M.N. Durakbasa, J.M. Bauer, P. Kopacek:
"A low-cost integrated concept for the hybridisation and electric conversion of cars and other mechatronic vehicles";
Elsevier ScienceDirect IFAC-PapersOnLine,
1
(2021),
Volume 54, Issue 13;
511
- 516.
More information
-
S. Ates, M.N. Durakbasa:
"Advanced Quality Approach For Energy Management";
Research Journal of Economics, Business and ICT,
Research Journal of Economics, Business and ICT
(2011),
Volume 4.
-
S. Ates, M.N. Durakbasa:
"Evaluation of corporate energy management practices of energy intensive industries in Turkey";
Energy,
1
(2012),
##.
-
R. Aydin, A. Akdogan, M.N. Durakbasa, S. Vanli:
"Castability Of Steering Knuckle From Aluminium Alloy By Low Pressure Die Casting Replacing Sand Casting Of Cast Iron";
ACTA TECHNICA NAPOCENSIS, Applied Mathematics and Mechanics,
1
(2022),
Vol 64, No 4s;
579
- 589.
More information
-
F. Badjgholi, B. Kittl:
"Prototyp zur Selektion der optimalen Werkzeuge bei spanabhebender Bearbeitung prismatischer Teile";
ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb,
4
(2002),
167
- 172.
More information
-
B. Balta, O. Erk, H.A. Solak, M.N. Durakbasa:
"Pareto Optimization of Heavy Duty Truck Rear Underrun Protection Design for Regulative Load Cases";
SAE International Journal of Commercial Vehicles,
1
(2014),
7(2);
726
- 735.
-
B. Balta, H.A. Solak, O. Erk, M.N. Durakbasa:
"A response surface approach to heavy duty truck rear underrun protection device beam optimisation";
International Journal of Vehicle Design,
1
(2016),
Volume 71, Issue 1;
3
- 30.
More information
-
F. Bammer, B. Holzinger:
"Time-multiplexing generates a diode laser beam with high beam quality";
Optics and Laser Technology,
39
(2007),
39;
1002
- 1007.
More information
-
F. Bammer, B. Holzinger, T. Schumi:
"Time multiplexing of high power laser diodes with single crystal photo-elastic modulators";
Optics Express,
14
(2006),
8;
9 pages.
More information
-
F. Bammer, R. Petkovsek:
"Q-switching of a fiber laser with a single crystal photoelastic modulator";
Optics Express,
15
(2007),
10;
6 pages.
More information
-
F. Bammer, R. Petkovsek, J. Petelin, J. Mozina:
"Fast ellipsometric measurements based on a single crystal photo-elastic modulator";
Optics Express,
18
(2010),
20;
21410
- 21418.
More information
-
F. Bammer, R. Petkovsek, D. Schuöcker, J. Mozina:
"Dual-mode single-crystal photoelastic modulator and possible applications";
Applied Optics,
48
(2008),
7;
86
- 91.
More information
-
F. Bammer, T. Schumi, A. Otto, D. Schuöcker:
"Laser Assisted Bedning for Efficient Light-Weight-Production";
Tehnicki Vjesnik-Technical Gazette,
18
(2011),
ISSN: 1330-3651;
571
- 576.
More information
-
F. Bammer, D. Schuöcker, T. Schumi, B. Holzinger, G. Humenberger:
"A Diode-Laser-System for Laser-Assisted Bending of Brittle";
Advances in Optical Technologies,
2011
(2011),
4 pages.
More information
-
C. F. Barbatti, J. Garcia, G. Liedl, A. Pyzalla:
"Joining of cemented carbides to steel by laser beam welding";
Materialwissenschaft und Werkstofftechnik,
38
(2007),
11;
908
- 914.
More information
-
G. Bas, M.N. Durakbasa, J.M. Bauer, G. Poszvek:
"Characterization and Utilization of the Intelligent Decision Making Methodology to Improve Quality and Precision in the Machining Process";
Key Engineering Materials,
Precision Machining VIII
(2016),
Vol. 686;
87
- 92.
-
G. Bas, L. Stoev, M.N. Durakbasa:
"Assessment of the Production Quality in Machining by Integrating a System of High Precision Measurement";
Procedia Engineering,
100
(2015),
1616
- 1624.
More information
-
J.M. Bauer, G. Bas, M.N. Durakbasa, P. Kopacek:
"Development Trends in Automation and Metrology";
Elsevier ScienceDirect IFAC-PapersOnLine,
Volume 48
(2015),
Issue 24;
168
- 172.
More information
-
J.M. Bauer, M.N. Durakbasa, G. Bas:
"Multi Functional Intelligent Measurement Robot, As a Part of a Global Quality Management System for Collaboration Between Small, Medium and Large Scale Enterprises";
Quality-Access to Success,
Vol.13, S5, November 2012
(2012),
ISSN: 1582-2559;
67
- 72.
More information
-
J.M. Bauer, M.N. Durakbasa, G. Bas, E. Güclü, P. Kopacek:
"Telepresence in Education";
Elsevier ScienceDirect IFAC-PapersOnLine,
Volume 48
(2015),
Issue 24;
178
- 182.
More information
-
J.M. Bauer, P. Kopacek, F. d Apolito, L. Kräuter, I. Dorna:
"Cost Oriented (humanoid) robots";
Elsevier ScienceDirect IFAC-PapersOnLine,
Volume 48
(2015),
Issue 24;
173
- 177.
More information
-
R. Bernerstätter, T. Nemeth, R. Glawar, Ch. Habersohn, H. Biedermann:
"Instandhaltung 4.0 - Sicherung der Produktqualität und Anlagenverfügbarkeit durch einen echtzeitbasierten Instandhaltungsleitstand";
WINGbusiness,
49. Jahrgang
(2016),
1;
25
- 28.
-
J. Bernreiter, C. Einspieler, D. Steindl, C. Buchner:
"Volumenbestimmung von E1-Gewichtsstücken; Automatische Prüfanlage zur Bestimmung des Volumens von Festkörpern";
WägeRaum (invited),
4
(2006),
19;
8
- 10.
More information
-
R. Bielak, F. Bammer, A. Otto, C. Stiglbrunner, C. Colasse, S. Murzin:
"Simulation of forming processes with local heating of dual phase steels with use of laser beam shaping systems";
Journal of Computer Optics,
40
(2016),
5;
659
- 667.
More information
-
D. Biermann, C. Rautert, T. Bathe, F. Bleicher, R. Zemann, J. Sacherl:
"Verfahrensvergleich bei der Bearbeitung von Faser-Kunststoff-Verbunden";
VDI-Z,
II
(2014),
22
- 24.
-
F. Bleicher:
"Grüne Produktion durch Balanced Manufacturing";
TU Bulletin,
09.01.2014
(2014),
3 pages.
-
F. Bleicher:
"Industry 4.0: A Vision Affects Manufacturing in Austria";
bridges-magazine (invited),
Volume 42
(2015).
-
F. Bleicher:
"The human factor";
Hoerbiger@motion,
Feature: Industry 4.0 - November 2014
(2014),
16
- 19.
-
F. Bleicher:
"Wie viel ist Innovation Wert?";
Industriemagazin Verlag GmbH - Factory (invited),
1
(2016),
10;
6
- 9.
-
F. Bleicher:
"Wissen schaft!";
MegaTech Das Österreichische Technikmagazin (invited),
7
(2006),
46.
More information
-
F. Bleicher, J. Bernreiter:
"Hybridbearbeitung von keramischen Werkstoffen";
MC-report (invited),
2/2010
(2010),
2;
9.
-
F. Bleicher, J. Bernreiter, C. Einspieler:
"Gesteuertes Einlippen-Tieflochbohren";
MegaTech Das Österreichische Technikmagazin (invited),
6
(2006),
64
- 65.
More information
-
F. Bleicher, F. Dür, I. Leobner, I. Kovacic, B. Heinzl, W. Kastner:
"Co-simulation environment for optimizing energy efficiency in production systems";
CIRP Annals-Manufacturing Technology,
63
(2014),
1;
441
- 444.
More information
-
F. Bleicher, F. Haas, A. Otto, K. Zeman:
"Production Systems";
ÖWGP - New Deal in Production (invited),
July
(2021),
July;
18
- 25.
-
F. Bleicher, H. Hunschofsky:
"Patience you must learn, patience";
AUTlook (invited),
jaenner
(2020),
1;
27.
-
F. Bleicher, H. Hunschofsky:
"Zurück zur Natur, hinauf auf die Bäume";
AUTlook (invited),
März
(2021),
3;
22
- 23.
-
F. Bleicher, G. Mauthner:
"Das Innovationsherz vieler Unternehmen muss begeistert schlagen";
iv - positionen (invited),
Juli/August
(2021),
12.
-
F. Bleicher, G. Mauthner:
"Von der Arbeitsvorbereitung zur virtuellen Fertigung";
AUTlook (invited),
2020
(2020),
6;
12
- 15.
-
F. Bleicher, G. Mauthner, P. Schaubmayr:
"Perfekt beim ersten Mal";
Hi!Tech (invited),
5. Mai
(2021),
5 pages.
-
F. Bleicher, F. Puschitz, C. Dorn:
"Wer kann, der CAM!";
MegaTech Das Österreichische Technikmagazin,
12
(2006),
30
- 37.
More information
-
F. Bleicher, F. Puschitz, C. Dorn, H. Caudr:
"Kleben für Fortgeschrittene";
MegaTech Das Österreichische Technikmagazin,
12
(2006),
12;
20
- 21.
More information
-
F. Bleicher, U. Renger, H. Lang:
"Lastkollektiverfassung als Voraussetzung für TCO-Modelle";
ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb (invited),
105
(2010),
277
- 281.
-
F. Bleicher, P. Schörghofer, Ch. Habersohn:
"In-Process Control With A Sensory Tool Holder To Avoid Chatter";
Journal of Machine Engineering (invited),
3
(2018),
18.
-
F. Bleicher, T. Trautner, A. Agovic, T. Neuhauser:
"Neue Möglichkeiten durch Automatisierung im Formenbau";
KC-Aktuell (invited),
3-2021
(2021),
3;
14
- 15.
-
I. Bogrekci, M.N. Durakbasa, P. Demircioglu:
"Comparison between 3D Digital and Optical Microscopes for the Surface Measurement by Computer Vision.";
at - Automatisierungstechnik,
61
(2013),
Heft 3;
195
- 202.
-
J. Brier, F. Bleicher:
"Design of a contactless powered and piezoelectric-actuated toolfor non-resonant low-frequency vibration-assisted machiningof brittle-hard materials";
The International Journal of Advanced Manufacturing Technology (invited),
Jänner 2021
(2021).
-
M. Buttazzoni, C. Zenz, A. Otto, R. Gómez Vázquez, G. Liedl, J. Arias:
"A Numerical Investigation of Laser Beam Welding of Stainless Steel Sheets with a Gap";
Applied Sciences (invited),
11
(2021),
6.
More information
-
M. Cakmakci, M.N. Durakbasa, M. Karasu, G. Bas, U. Gurel:
"The importance of quality control within the relationship between the quality engineering and Taguchi methodology";
Key Engineering Materials,
1
(2015),
Vol. 637;
27
- 35.
-
M. Cakmakci, N. Ortabas-Demirel, M.N. Durakbasa, G. Bas, A. Hornikova:
"Interaction Between Capability Indices and Skewness of Non-Normal Processes Using Quantile Based Estimation and Johnson Transformation";
Quality-Access to Success,
Vol. 13, S5, November 2012
(2012),
79
- 86.
More information
-
I. Cavusoglu, M.N. Durakbasa, M. Cakir:
"Analysis of Surface Modification of GFRP and Influence on the Drilled Part Delamination";
Acta Physica Polonica A,
Vol. 131
(2017),
3;
423
- 427.
More information
-
I. Cavusoglu, M.N. Durakbasa, M. Cakir:
"The Effects of Drilling Operation on the Surface Roughness of Modified GFRP Composites";
Acta Physica Polonica A,
1
(2018),
Vol. 134;
339
- 341.
More information
-
D. Coskun, P. Demircioglu, I. Bogrekci, M.N. Durakbasa:
"Electrodynamical considerations in r-t measurements of high Tc bulk superconductivity: an inexpensive set up design";
Quality-Access to Success,
Vol.13, S5, November 2012
(2012),
325
- 332.
More information
-
C. Davutoglu, M.N. Durakbasa, G. Bas, E. Güclü:
"Improved Quality and Reliability in Telecommunication Network Testing by means of a Remote Online Test System";
International Journal of Online Engineering (iJOE),
Vol.10, No.4
(2014),
ISSN: 1868-1646;
66
- 69.
More information
-
P. Demircioglu, I. Bogrekci, M.N. Durakbasa:
"Micro scale surface texture characterization of technical structures by computer vision";
Measurement,
Volume 46
(2013),
Issue 6;
2022
- 2028.
-
P. Demircioglu, M.N. Durakbasa:
"Investigations on machined metal surfaces through the stylus type and optical 3D instruments and their mathematical modeling with the help of statistical techniques";
Measurement,
44
(2011),
611
- 619.
-
P. Demircioglu, M.N. Durakbasa, O. Tan:
"A Comparison Between Contact Type Profilometer and Different D Optical Techniques: A Case Study in Characterization of Machined Surface Structures";
Quality-Access to Success,
Vol.13, S5, November 2012
(2012),
117
- 122.
More information
-
J. Diebold, G. Wiesinger, F. Bleicher:
"Horizontal bandsawing of Inconel 718: The influence of parameter variations and wear on bandsawing deviations";
Materials Today (invited),
62
(2022),
5;
2617
- 2623.
More information
-
C. Dorn:
"Ein Planet - zwei Welten";
Industriemagazin,
11/09
(2009),
11/09;
94.
-
C. Dorn, N. Herzig, J. Trebels:
"Dem internationalen Wettbewerb durch neue Produktionsstrategien begegnen";
UdZ - FIR-Zeitschrift für Betriebsorganisation und Unternehmensentwicklung,
2
(2008),
2;
15
- 17.
-
C. Dorn, I. Kovacic, F. Bleicher, C. Achammer, M. Honsig:
"Energie sparen im großen Stil";
Hi!Tech,
3/2010
(2010),
52
- 53.
-
F. Dür:
"Clusterland Award 2013 Preisträger";
Online - ecoplus.at,
19,12,13
(2013),
1 pages.
-
F. Dür, T. Flatz:
""eco2production" erhält Clusterland Award 2013";
TU Bulletin,
20.06.13
(2013),
2 pages.
-
F. Dür, T. Flatz, B. Losert:
"EU Projekt "eco2-cut" geht in die nächste Runde";
MC-report,
2
(2012),
14.
-
F. Dür, R. Holzer:
"Optimierung durch Energiemonitoring";
www.industrieweb.at (invited),
17.09.2015
(2015),
2 pages.
-
M.N. Durakbasa:
"Development Of Improved Techniques For New Levels Of Manufacturing Precision With The Micro- And Nano-Components";
International Journal Advanced Quality,
Vol. 43
(2015),
1;
1
- 4.
More information
-
M.N. Durakbasa:
"Dynamification of testing intervals for measuring instrument confirmation";
e&i,
1
(1999),
116;
270
- 274.
-
M.N. Durakbasa:
"Koordinatenmesstechnik für biomedizinische Anwendungen";
e&i,
117
(2000),
4;
269
- 272.
-
M.N. Durakbasa:
"Messtechnik und Rückverfolgbarkeit in der Qualitätssicherung";
E&I Elektrotechnik & Informationstechnik (ISSN 092-383X),
111
(1994),
4;
185
- 186.
-
M.N. Durakbasa:
"Micro- and nano-scale manufacturing development through precision metrology";
The TQM Journal (invited),
1
(2016),
Volume 28 Issue 5;
685
- 703.
-
M.N. Durakbasa:
"Produktdatenaustausch mit Koordinatenmeßgeräten in der intelligenten Fertigungsumgebung";
e&i,
1
(1997),
114 Nr.4;
200
- 203.
-
M.N. Durakbasa:
"Prüfmittelüberwachung und Qualitätssicherung in der rechnerintegrierten Produktion";
E&I Elektrotechnik & Informationstechnik (ISSN 092-383X),
1
(1993),
Heft 3;
158
- 164.
More information
-
M.N. Durakbasa:
"Total Quality Management (TQM) und Meßtechnik in der rechnerintegrierten Produktion";
e&i Elektrotechnik und Informationstechnik,
112. Jg.
(1995),
H. 4;
180
- 182.
-
M.N. Durakbasa:
"Überwachung, Verwaltung und Fähigkeitsuntersuchungen von Prüfmitteln";
Elektrotechnik & Informationstechnik,
113. Jg.
(1996),
H. 4;
286
- 287.
-
M.N. Durakbasa, A. Afjehi-Sadat, N. Nomak Akdogan:
"Dimensional And Geometrical Measurements And Interpretation Of Measuring Results On The Basis Of The Skin-Model";
Measurement Science Review,
1
(2001),
1;
89
- 92.
-
M.N. Durakbasa, A. Akdogan, S. Vanli, A. Günay:
"Surface Roughness Modeling with Edge Radius and End Milling Parameters on Al 7075 Alloy Using Taguchi and Regression Methods";
Acta Imeko,
Volume 3
(2014),
4;
46
- 51.
-
M.N. Durakbasa, A. Akdogan, S. Vanli, A. Gunay Bulutsuz:
"Optimization of end milling parameters and determination of the effects of edge profile for high surface quality of AISI H13 steel by using precise and fast measurements";
Measurement,
1
(2015),
Volume 68;
92
- 99.
More information
-
M.N. Durakbasa, G. Bas:
"From Nano- to Pico- to Femto-: Future Challenges for Cost-Oriented Manufacturing";
Elsevier ScienceDirect IFAC-PapersOnLine,
1
(2019),
Volume 52, Issue 25;
382
- 386.
More information
-
M.N. Durakbasa, G. Bas:
"Key Metrology Roadmap in Advanced Manufacturing Technology of Micro-components and Nano-structures";
International Journal of Mechanical Engineering and Automation,
Volume 1
(2014),
6;
347
- 353.
More information
-
M.N. Durakbasa, G. Bas, J.M. Bauer:
"Implementing Education Vision in the Context of Industry 4.0";
IOP Conference Series: Materials Science and Engineering (invited),
1
(2018),
448 012045;
1
- 6.
More information
-
M.N. Durakbasa, G. Bas, J.M. Bauer, L. Kräuter:
"Ein intelligentes, vernetztes präzisionsmesstechnisches Konzept als strategischer Ansatz im Forschungs- und Industriebereich";
TM - Technisches Messen,
82
(2015),
Heft 1;
7
- 15.
-
M.N. Durakbasa, G. Bas, J.M. Bauer, G. Poszvek:
"Intelligent Design and Advanced Metrology as Strategic Approaches to Efficiency and Quality Improvement in Smart Manufacturing";
International Journal of Advanced Quality,
Vol.41
(2013),
1;
17
- 22.
More information
-
M.N. Durakbasa, G. Bas, J.M. Bauer, G. Poszvek:
"Trends In Precision Manufacturing Based On Intelligent Design And Advanced Metrology";
Key Engineering Materials,
Trans Tech Publications, Switzerland
(2014),
Vol.581;
417
- 422.
More information
-
M.N. Durakbasa, G. Bas, J.M. Bauer, D. Riepl:
"A Model of Global Cooperation to Enable Intelligent Metrology Applications by Means of an Integrated Teleoperation System";
International Journal of Online Engineering (iJOE),
1
(2015),
Vol 11 No 3;
14
- 19.
More information
-
M.N. Durakbasa, G. Bas, Z. Özkan:
"A New Strategy for Energy - A Proposal of an Energy Management Implementation Model for Productivity Enhancement within the Integrated Management Systems";
Journal of the Institute of Management Services,
1
(2011),
Volume 55 Number 2;
28
- 30.
-
M.N. Durakbasa, G. Bas, P.H. Osanna, J.M. Bauer:
"Sustainable Management Systems of Quality, Energy and Environment in Industry / Sisteme durabile de management al calitãtii, energiei si mediului în industrie";
Quality - access to success,
Anul 12
(2011),
4;
21
- 25.
-
M.N. Durakbasa, J.M. Bauer, R. Alcoberro, E. Capuano:
"A Computer-Simulated Environment for Modeling and Dynamic- Behavior-Analysis of Special Brushless Motors for Mechatronic Mobile Robotics Systems";
Elsevier ScienceDirect IFAC-PapersOnLine,
Volume 49
(2016),
Issue 29.
More information
-
M.N. Durakbasa, J.M. Bauer, G. Bas, L. Kräuter:
"Novel Trends in the Development of Autonomation and Robotics in Metrology for Production in the Future";
Elsevier ScienceDirect IFAC-PapersOnLine,
Volume 49
(2016),
Issue 29.
More information
-
M.N. Durakbasa, J.M. Bauer, G. Bas, L. Kräuter:
"Towards a sophisticated approach to cost oriented automation and intelligent metrology in the advanced manufacturing";
Elsevier ScienceDirect IFAC-PapersOnLine,
1
(2018),
51-30;
54
- 59.
More information
-
M.N. Durakbasa, J.M. Bauer, G. Bas, D. Riepl:
"Telepresence and Teleoperation in Work Concept of Multifunctional Intelligent Factories: Experience of Telepresence in the Micro and Nano Metrology Laboratory AuM-TU-Wien";
Quality-Access to Success,
Vol.13, S5, November 2012
(2012),
131
- 136.
More information
-
M.N. Durakbasa, J.M. Bauer, C. Verrastro, D. Riepl, E. Ferradas:
"Robot Autónomo Especial MFI-MR, en el Marco de Sistemas Globales de Gestión de la Calidad y Entornos de de Colaboración entre Pequeñas y Medianas Empresas";
Anales de la JII 2011 8º Jornada de Informática Industrial,
1
(2011),
159
- 173.
-
M.N. Durakbasa, I. Bogrekci, P. Demircioglu, G. Bas, A. Günay:
"Surface characterization by accurate measurement and image processing systems on machined surfaces of precision cutting tools";
JAMRIS - Journal of Automation, Mobile Robotics & Intelligent Systems,
Volume 6
(2012),
03;
51
- 56.
-
M.N. Durakbasa, P. Demircioglu, I. Bogrekci, G. Bas, A. Gunay Bulutsuz:
"Assessment of machining with uncoated and coated end mills and determining surface topography using 2D fast Fourier transform";
International Journal of Nanomanufacturing,
Vol.8
(2012),
5/6;
493
- 507.
More information
-
M.N. Durakbasa et al.:
"Advanced Metrology and Intelligent Quality Automation for Industry 4.0-Based Precision Manufacturing Systems";
Solid State Phenomena Trans Tech Publications,
1
(2017),
261;
432
- 438.
More information
-
M.N. Durakbasa, P.H. Osanna:
"Intelligent Design and Metrology for Higher Quality, Accuracy and Improving Production Efficiency";
Acta Mechanica Slovaca,
Volume 15
(2011),
1/2011;
6
- 10.
-
M.N. Durakbasa, P.H. Osanna:
"Intelligent Tolerancing And Advanced Metrology To Support Total Quality Management And Modern Industrial Fabrication";
International Journal "Total Quality Management & Excellence",
1, Vol.39
(2011),
UDK 658.5;
27
- 31.
-
M.N. Durakbasa, P.H. Osanna:
"Koordinatenmesstechnik und Werkstük-Mikrogeometrie";
F & M. Feinwerktechnik, Mikrotechnik, Messtechnik,
95
(1987),
8;
526
- 530.
-
M.N. Durakbasa, P.H. Osanna:
"Lageabweichungen bestimmen die Werkstückgenauigkeit";
WT Werkstatttechnik,
79
(1989),
3;
141
- 145.
-
M.N. Durakbasa, P.H. Osanna:
"Micro and Nano Metrology to Support Developmentsin Technology, Sustainability and Biomedicine.";
Academic Journal of Manufacturing Engineering,
1
(2003),
2;
6
- 12.
-
M.N. Durakbasa, P.H. Osanna:
"Prüfmittelüberwachung und -verwaltung im Qualitäitsmanagement- leistungsfähig und flexibel durch Rechnereinsatz";
Elektrotechnik & Informationstechnik,
1
(1998),
Heft 4;
207
- 212.
More information
-
M.N. Durakbasa, P.H. Osanna:
"Utilization of Co-ordinate Measurement Technique in Biomedicine to Evaluate the Shape of Non-Technical Structures";
Measurement,
33
(2003),
N.2;
157
- 161.
-
M.N. Durakbasa, P.H. Osanna, A. Afjehi-Sadat:
"A general approach to workpiece characterization in the frame of GPS (Geometrical Product Specification and Verification";
International Journal of Machine Tools & Manufacture,
41
(2001),
2147
- 2151.
More information
-
M.N. Durakbasa, P.H. Osanna, A. Afjehi-Sadat, Y. D. Samarawickrama, A. Krsek:
"Application of Sophisticated Production Metrology Nanometrology for Quality Control in Bio-Engineering";
Measurement Science Review,
Section 2
(2005),
Volume 5;
1
- 10.
-
M.N. Durakbasa, P.H. Osanna, G. Bas:
"Advanced Management Systems for Quality, Energy and Environment for Efficiency Enhancement of Modern Manufacturing Industries";
International Journal Advanced Quality,
Vol.40/2/Belgrade
(2012),
UDC 658.5;
11
- 19.
-
M.N. Durakbasa, P.H. Osanna, G. Bas:
"Intelligent Design and Advanced Metrology to Support and Improve Integrated Management Systems for Quality, Environment and Energy in Production Engineering";
Quality-Access to Success,
Vol.13, S5, November 2012
(2012),
17
- 22.
More information
-
M.N. Durakbasa, P.H. Osanna, G. Bas, P. Demircioglu, M. Cakmakci, A. Hornikova:
"Novel Developments in Dimensional Nanometrology in the Context of Geometrical Product Specifications and Verification (GPS)";
JAMRIS - Journal of Automation, Mobile Robotics & Intelligent Systems,
Volume 6
(2012),
02;
22
- 25.
-
M.N. Durakbasa, P.H. Osanna, J.M. Bauer, G. Bas:
"Innovation In Production Metrology For Precision Engineering And To Support Sustainability And Improvement Of Process And Product Quality In Modern Manufacturing Industry";
MSD Journal,
Volume 4
(2012),
1;
5
- 11.
-
M.N. Durakbasa, P.H. Osanna, M. Cakmakci, R. Oberländer, G. Waczek:
"Flexible Messzelle";
e&i,
I
(1991),
6;
257
- 261.
-
M.N. Durakbasa, P.H. Osanna, L. Crisan, L. Kräuter:
"The Analytic Description and Design of Workpiece Geometry for Mechanical Engineering";
Journal for Technology of Plasticity,
Volume 33
(2008),
UDK 621.7;
13
- 21.
-
M.N. Durakbasa, P.H. Osanna, P. Demircioglu:
"The Factors Affecting Surface Roughness Measurements of the Machined Flat and Spherical Surface Structures - The Geometry and the Precision of the Surface";
Measurement,
Volume 44
(2011),
Issue 10;
1986
- 1999.
-
M.N. Durakbasa, P.H. Osanna, R. Oberländer:
"Datacommunication for Quality Assurance and Quality Management in Computer Intagrated Industry";
Elsevier ScienceDirect IFAC-PapersOnLine,
1
(1992),
Volume 25, Issue 8;
165
- 172.
More information
-
M.N. Durakbasa, K.J. Stout, P.H. Osanna, M.E. Yurci:
"Function Dependent Quality Assurance in Modern Production Engineering";
Manufactoring Engineering,
VI
(2007),
4;
88
- 90.
-
M.N. Durakbasa, M.E. Yurci, A. Akdogan, S.B. Yildirim:
"Surface Roughness Measurement Uncertainties Both in Tactile and Optical Instruments";
Quality-Access to Success,
Vol.13, S5, November 2012
(2012),
137
- 140.
More information
-
C. Edtmaier, J. Segl, E. Rosenberg, G. Liedl, R. Pospichal, A. Steiger-Thirsfeld:
"Microstructural characterization and quantitative analysis of the interfacial carbides in Al(Si)/diamond composites";
Journal of Materials Science,
53
(2018),
22;
15514
- 15529.
-
C. Einspieler, J. Bernreiter, C. Buchner, D. Steindl:
"Entwicklung eines Handlingsystems für Gewichte von 1 mg bis 10 g zur Bestückung hochpräziser Waagen";
WDM - wägen dosieren mischen,
5
(2007),
16
- 19.
-
C. Einspieler, J. Bernreiter, C. Buchner, D. Steindl:
"Realisierung eines vollautomatischen Masselabors durch drei "Wägeroboter"";
WDM - wägen dosieren mischen,
6
(2007),
18
- 23.
-
C. Einspieler, J. Bernreiter, D. Steindl, C. Buchner:
"Entwicklung und Fertigung eines Robotersystems für Gewichte von 1 mg bis 10 g";
WägeRaum,
1
(2007),
20;
16
- 19.
More information
-
C. Einspieler, C. Buchner:
"Volumenbestimmung von E1-Gewichtsstücken";
BTE Informationen zum Eichwesen (invited),
2
(2006),
17
- 18.
More information
-
C. Einspieler, C. Buchner, D. Steindl:
"Entwicklung und Fertigung einer Prüfanlage zur Dichtebestimmung";
WägeRaum (invited),
1
(2006),
16;
23
- 26.
More information
-
T. Flatz, F. Dür, B. Losert:
"Erfolgreiches EU-Projekt - eco2cut Industrie spart Energie und Ressourcen";
Factory,
10
(2012).
-
R Fürbacher, G. Liedl, S. Murzin:
"Experimental study of spatial frequency transition of laser induced periodic surface structures";
Journal of Physics: Conference Series,
1745
(2021),
7 pages.
More information
-
B. Geringer, D. Klawatsch, J. Graf, H.-P. Lenz, G. Liedl, D. Schuöcker, W.F. Piock, M. Jetzinger, P. Kapus:
"Laserzündung - Ein neuer Weg für den Ottomotor";
Motortechnische Zeitschrift (MTZ) (invited),
65 Jahrgang
(2004),
3;
214
- 219.
More information
-
A. Gören, M.N. Durakbasa, H. Göcerler:
"Verification of Product and Production Precision Using Surface Roughness and Coordinate Measuring Machines";
Endüstri ve Otomasyon - Industry and Automation,
I
(2007),
126;
24
- 29.
-
S. Gössinger, C. Bauer, C. Lechner:
"Using Machine Hammer to Reduce Friction in Turbulent Fluid Flows";
Wasserwirtschaft,
105
(2015),
1;
120
- 124.
-
A. Günay, M.N. Durakbasa, A. B. Katipoglu:
"Evaluation of Modifications of Implant Surfaces Created by Means of Sandblasting and Acid Etching Techniques Applied on the Pure Titanium Implants G4 (Grade 4) Used in the Dental Implantology With the Consideration of the Manufacturing Stages (DENTAL İMPLANTOLOJİDE KULLANILAN G4 SAF TİTANYUM İMPLANTLARIN KUMLAMA VE ASİTLEME TEKNİKLERİYLE OLUŞTURULAN YÜZEY MODİFİKASYONLARININ İMALAT AŞAMALARINI ELE ALARAK DEĞERLENDİRİLMESİ)";
Mühendis ve Makina,
54
(2013),
641;
36
- 43.
More information
-
A. Günay Bulutsuz, P. Demircioglu, I. Bogrekci, M.N. Durakbasa, A. B. Katipoglu:
"Measurement and image processing evaluation of surface modifications of dental implants G4 pure titanium created by different techniques";
AIP Conference Proceedings - American Institute of Physics,
1653 (1)
(2015),
020024;
1
- 8.
More information
-
A. Günay Bulutsuz, K. Yetilmezsoy, M.N. Durakbasa:
"Application of fuzzy logic methodology for predicting dynamic measurement errors related to process parameters of coordinate measuring machines";
Journal of Intelligent & Fuzzy Systems,
1
(2015),
Preprint;
1
- 15.
More information
-
A. Günay Bulutsuz, M.E. Yurci, M.N. Durakbasa:
"Optimization Process Parameters of Equal Angular Channel Pressing According to the Measurement Results of Microstructural Homogeneity";
Materials Research-Ibero-American Journal Of Materials,
1
(2018),
Vol.21 no.6;
1
- 9.
More information
-
J. Gumpinger, S. Felber, G. Liedl:
"Mechanisch-technologische Eigenschaften der Titanlegierung Ti-6Al-4V hergestellt mit Selective Laser Melting (SLM)";
Schweiss-&Prüftechnik,
11/12
(2013),
184
- 190.
More information
-
A. Gunay Bulutsuz, S. Fank, T. Gulmez, M.N. Durakbasa:
"Calculation of measurement uncertainty for plastic (ABS) material in flexural testing";
International Journal of Metrology and Quality Engineering,
1
(2013),
Volume 4, Issue 01;
29
- 33.
-
A. Gunay Bulutsuz, B. Sagbas, M.N. Durakbasa:
"Importance of Measurement Parameters for the Dental Implant Surface Characterization";
Acta Physica Polonica A,
1, Volume 125
(2014),
2;
484
- 487.
-
M. Hacksteiner:
"Datenrucksack für den "Industrie 4.0" - Weg";
Austromatisierung (invited),
5
(2015),
52;
14
- 17.
-
M. Hacksteiner:
"Den Energiefressern auf der Spur";
MC_Report (invited),
April
(2015),
1;
8.
-
M. Hacksteiner:
"Energie messen, Produktivität erhöhen";
Chemiereport (invited),
07
(2015),
43
- 46.
-
M. Hacksteiner:
"Messen, analysieren und Geld sparen";
MC_Report (invited),
03
(2015),
11.
-
M. Hacksteiner, F. Dür, B. Losert:
"Auf Null-Invest folgt höherer Gewinn";
Produktiver durch Energie-Effizienz - 5 Clusterprojekte zeigen den Weg (invited),
1
(2016),
26
- 27.
-
M. Hacksteiner, F. Dür, B. Losert:
"Eine Frage der Balance";
Produktiver durch Energie-Effizienz - 5 Clusterprojekte zeigen den Weg (invited),
1
(2016),
18
- 21.
-
M. Hacksteiner, F. Dür, B. Losert:
"Etappen am Weg zur Energieeffizienz";
Produktiver durch Energie-Effizienz - 5 Clusterprojekte zeigen den Weg (invited),
1
(2016),
6
- 9.
-
M. Hacksteiner, F. Dür, B. Losert:
"Monitoring deckt Energie-Fresser auf";
Produktiver durch Energie-Effizienz - 5 Clusterprojekte zeigen den Weg (invited),
1
(2016),
10
- 13.
-
M. Hacksteiner, F. Dür, B. Losert:
"Potenziale im Produktions-Prozess";
Produktiver durch Energie-Effizienz - 5 Clusterprojekte zeigen den Weg (invited),
1
(2016),
14
- 17.
-
M. Hacksteiner, F. Dür, B. Losert, F. Bleicher:
"Der Gesetzgeber weist den Weg";
Produktiver durch Energie-Effizienz - 5 Clusterprojekte zeigen den Weg (invited),
1
(2016),
3
- 5.
-
K. Hammerl, F. Bleicher:
"DNC in verteilten Fertigungsleitsystemen";
Maschinenmarkt,
46/2001
(2001),
38
- 42.
-
M. Hennig, G. Reisinger, T. Trautner, P. Hold, D. Gerhard, A. Mazak:
"TU Wien Pilot Factory Industry 4.0";
Procedia Manufacturing,
31
(2019),
200
- 205.
More information
-
A. Hornikova, M.N. Durakbasa:
"Industrial Engineering and Technology Development Supported by Statistical Methods";
Economics and Informatics,
1
(2013),
XI;
32
- 46.
More information
-
Y. Hui, S. Felber, F. Bleicher:
"Chipping mechanism and material removal rate of diamond and core drilling";
Diamond & Abrasives Engineering,
4
(2013),
1
- 6.
-
C. Janner, F. Bleicher:
"Sicherheitsaspekte beim Einsatz von Teleservices in Automatisierungsanlagen";
MegaTech Das Österreichische Technikmagazin,
5/01
(2001).
-
L. Kandrac, I. Mankova, M. Vrabel, J. Beno, J. Stahovec, M.N. Durakbasa, G. Bas:
"Statistical Analysis of Cutting Force, Temperature and Power of FEM Modeling when Machining Titanium Alloy";
Applied Mechanics and Materials Trans Tech Publications,
1
(2014),
Vol. 693;
358
- 363.
-
A. Kaplan, G. Liedl et al.:
"Laser dispersing of TiC-Powder into Al-Substrates";
Lasers in Engineering,
7
(1998),
3-4;
165
- 178.
-
B. Katalinic:
"Bionic Assembly Systems: Selforganizing Complex Flexible Assembly System";
Acta Mechanica Slovaca,
Vol. 6
(2002),
No. 2/2002;
15
- 20.
-
B. Katalinic, V. Pryanichnikov, K. Ueda, P. Cesarec, I. Kukushkin, R. Kettler:
"Bionic Assembly System: working modes, control and scheduling";
International Journal of Industrial Engineering and Management,
Vol 3
(2012),
3;
121
- 131.
-
J. Ketterer, F. Bleicher:
"Zerspaner werden digital - wenn es sich rechnet";
MM Maschinen Markt (invited),
1
(2019),
1;
42
- 45.
-
R. Kienberger, E. Goulielmakis, M. Uiberacker, A. Baltuska, V. Yakovlev, F. Bammer, A. Scrinzi, Th. Westerwalbesloh, U. Kleineberg, U. Heinzmann, M. Drescher, F. Krausz:
"Atomic transient recorder";
Nature,
427
(2004),
817
- 821.
-
B. Kittl:
"Datenbankgestützte Verwaltung von Betriebsmitteln senkt Kosten";
Maschinenmarkt,
34
(2001),
30
- 33.
-
I. Kovacic, K. Orehounig, A. Mahdavi, F. Bleicher, A. Dimitrou, L. Waltenberger:
"Energy Efficient Production - Interdisciplinary, Systemic Approach through Integrated Simulation";
Strojarstvo (invited),
55
(2013),
1;
17
- 34.
More information
-
A. Koyun, M.E. Yurci, B. Sagbas, M.N. Durakbasa:
"Evaluation of temperature rise within articulating surfaces of artificial hip joint materials";
Quality-Access to Success,
Vol.13, S5, November 2012
(2012),
379
- 384.
More information
-
L. Kräuter, P.H. Osanna:
"PRECISION FOR THE ALIGNMENT OF A PARTICLE COLLIDER AT A TEMPERATURE OF 1.9 K";
Academic Journal of Manufacturing Engineering,
2
(2004),
1;
15
- 20.
-
S. Krall, C. Baumann, H. Agiwal, F. Bleicher, F. Pfefferkorn:
"Investigation Of Multilayer Coating Of En Aw 6060 - T66 Using Friction Surfacing";
Journal of Machine Engineering (invited),
Vol 22 (2391-8071)
(2022).
-
C. Krenn, T. Weichbold, G. Korp, E. Meixner, H. Stockner, D. Berger, J. Bernreiter, F. Bleicher, G. Geiger, J. Fresner:
"Qualitative and quantitative modelling to build a conceptual framework to identify energy saving options: case study of a wire producing";
Journal of Cleaner Production (invited),
Volume 95
(2015),
212
- 222.
-
S. Krenn, G. Vorlaufer, B. Scheichl, E. Haberda, A. Grafl:
"Modellierung und FEM-Simulation derr Hydrodynamik in Kurbeltrieb-Gleitlagers / Modelling and FEM simulation of the hydrodynamics in crank mechanism journal bearings";
Tribologie und Schmierungstechnik (invited),
60. Jg.
(2013),
3;
15
- 22.
-
D. Kumar, G. Liedl, S. Gururaja:
"Formation of sub-wavelength laser induced periodic surface structure and wettability transformation of CFRP laminates using ultra-fast laser";
Materials Letters,
276
(2020).
More information
-
D. Kumar, G. Liedl, A. Otto, W. Artner:
"Insights into the Correlation between Residual Stresses, Phase Transformation, and Wettability of Femtosecond Laser-Irradiated Ductile Iron";
Nanomaterials,
12
(2022),
1271;
11 pages.
More information
-
D. Kumar, M. Sauer, K. Kroechert Ching, G. Kalss, A. dos Santos, G. Ramer, A. Foelske-Schmitz, B. Lendl, G. Liedl, A. Otto:
"Wettability transition of femtosecond laser patterned nodular cast iron (NCI) substrate";
Applied Surface Science,
559
(2021),
149897.
More information
-
F. Lackner, W. Riegler, P.H. Osanna, M.N. Durakbasa:
"High Precision Strain Gauge Based Sensor for Monitoring Suspension Forces at CERN";
Measurement Science Review,
Volume 8
(2008),
2;
46
- 49.
-
M. Lamprecht, E. Kocbay, M. Leonhartsberger, Y. Vetyukov, F. Bleicher:
"Nonlinearmechanicalmodel of the shaft of a roll forming mill and parameter identification";
The International Journal of Advanced Manufacturing Technology (invited),
Jänner 2021
(2021),
3363
- 3375.
More information
-
M. Lamprecht, M. Leonhartsberger:
"Tool Stiffness Calculation In Roll Forming";
International Journal of Simulation Modelling (invited),
03-2021
(2021),
40
- 51.
More information
-
P. Lang, M. Lang, A. Falahati, E. Kozeschnik:
"The Effect of Si on the Precipitation Behaviour in Al-Mg-Si Alloys Studied by Thermo-kinetic Simulation and DSC Experiments";
Berg- und Hüttenmännische Monatshefte (BHM),
159
(2013),
3;
116
- 121.
More information
-
N. Lasemi, Ch. Rentenberger, G. Liedl, D. Eder:
"The influence of fluid nature on femtosecond laser ablation properties of SiO2/Si target and synthesis of ultrafine-grained Si nanoparticles";
Nanoscale Advances,
2
(2020),
3991
- 4002.
More information
-
N. Lasemi, Ch. Rentenberger, R. Pospichal, A. Cherevan, M. Pfaffeneder-Kmen, G. Liedl, D. Eder:
"Femtosecond laser-assisted synthesis of Ni/Au BONs in various alcoholic solvents";
Applied Physics A: Materials Science & Processing,
125
(2019),
8.
More information
-
N. Lasemi, G. Rupprechter, G. Liedl, D. Eder:
"Near-Infrared Femtosecond Laser Ablation of Au-Coated Ni: Effect of Organic Fluids andWater on Crater Morphology, Ablation Efficiency and Hydrodynamic Properties of NiAu Nanoparticles";
Materials,
14
(2021),
5544.
More information
-
C. Lechner, S. Krall:
"Maschinelles Oberflächenhämmern";
maschinenbau - Das Schweizer Industriemagazin. Seit 1972,
10
(2015),
74
- 75.
-
K. Leitz, H. Koch, A. Otto et al.:
"Numerical simulation of process dynamics during laser beam drilling with short pulses";
Applied Physics A: Materials Science & Processing,
Volume 105
(2011),
4;
7 pages.
More information
-
K. Leitz, B. Redlingshöfer, Y. Reg, A. Otto, M Schmidt:
"Metal Ablation with Short and Ultrashort Laser Pulses";
Physics Procedia,
Part 2
(2011),
ISSN: 1875-3892;
230
- 238.
More information
-
G. Liedl:
"Das Institut für Spanlose Fertigung und Hochleistungslasertechnik der TU Wien";
Schweiss-&Prüftechnik (invited),
12
(2002),
196
- 198.
More information
-
G. Liedl, R. Bielak et al.:
"Joining of Aluminum and Steel in Car Body Manufacturing";
Physics Procedia,
Amsterdam
(2011),
ISSN: 1875-3892;
150
- 156.
More information
-
G. Liedl, R. Gómez Vázquez, S. Murzin:
"Joining of aluminium alloy and steel by laser assisted reactive wetting";
Lasers in Manufacturing and Materials Processing,
5
(2017),
1;
1
- 15.
More information
-
G. Liedl, A. Kratky:
"Leichtes Umformen mit Laserlicht";
Automotive Materials (invited),
02
(2007),
26
- 28.
-
G. Liedl, R. Pospichal, S. Murzin:
"Features of Changes in the Nanostructure and Colorizing of Copper during Scanning with a Femtosecond Laser Beam";
Journal of Computer Optics,
41
(2017),
4;
504
- 509.
More information
-
G. Liedl, K. Schröder et al.:
"Excimer Laser Processing of Ferrite Video Heads";
Applied Surface Science,
106
(1996),
374
- 378.
-
B. Ljoljic, B. Katalinic, K. Stuja:
"Optimisation of Flexible Assembly System Using Simulation";
International Journal of Simulation Modelling,
Vol. 1
(2002),
No 1/2002;
16
- 22.
-
B. Ljoljic, B. Katalinic, K. Stuja, V. Kordic:
"Simulation of Complex Flexible Assembly System";
Acta Mechanica Slovaca,
Vol.6
(2002),
2/2002;
117
- 122.
-
D. Majstorovic, S. Stojadinovic, M.N. Durakbasa:
"Path Planning For Inspection Prismatic Parts On Cmm As A Part Of Cyber - Physical Manufacturing Metrology Model";
Journal Proceedings in Manufacturing Systems [Proc in MS],
1
(2016),
Volume 11 Issue 1;
3
- 8.
More information
-
M. Marek, M. Novak, F. Holesovský, M.N. Durakbasa, E. Walcher:
"The Effect of Changes to Nickel Coating Machine on Surface Integrity and Microstructure after Grinding";
Manufacturing Technology,
1
(2017),
Vol. 17, No. 6;
906
- 912.
More information
-
M. Marek, M. Novak, T. Rytina, M.N. Durakbasa:
"Process and Equipment Improvement for Nickel Brush Plating Applications";
Manufacturing Technology,
1
(2017),
Vol. 17, No.4;
503
- 507.
-
T. Muhic, L Kosec, G. Liedl et al.:
"Assessment of the Effect of Nd:YAG Laser Pulse Operating Parameters on the Metallurgical Characteristics of Different Tool Steels using DOE Software";
METALURGIJA,
50
(2011),
2;
101
- 105.
More information
-
S. Murzin, V. Balyakin, G. Liedl, A. Melnikov, R Fürbacher:
"Improving Tribological Properties of Stainless Steel Surfaces by Femtosecond Laser Irradiation";
Coatings (invited),
10
(2020),
7.
More information
-
S. Murzin, R. Bielak, G. Liedl:
"Algorithm for calculation of the power density distribution of the laser beam to create a desired thermal effect on technological objects";
Journal of Computer Optics,
40
(2016),
5;
679
- 684.
More information
-
S. Murzin, N. Kazanskiy, C. Stiglbrunner:
"Analysis of the Advantages of Laser Processing of Aerospace Materials Using Diffractive Optics";
Metals,
11
(2021),
6;
21 pages.
More information
-
S. Murzin, G. Liedl:
"Laser welding of dissimilar metallic materials with use of diffractive optical elements";
Computer Optics,
41
(2017),
6;
848
- 855.
More information
-
S. Murzin, G. Liedl, R. Pospichal:
"Coloration of a copper surface by nanostructuring with femtosecond laser pulses";
Optics and Laser Technology,
119
(2019).
More information
-
N. Nomak Akdogan, M.N. Durakbasa:
"Thermal Cycling Experiments for Glass Moulds Surface Texture Lifetime Prediction - Evaluation with the Help of Statistical Techniques";
Measurement,
I
(2008),
41/6;
697
- 703.
-
P.H. Osanna:
"Argentinisch-Österreichische Tage der Industrie-Technologie-Universitätszusammenarbeit";
e&i,
1
(2005),
4;
a31
- a32.
-
P.H. Osanna:
"The Importance of Intelligent Quality Technology and Production Metrology for Advanced Manufacturing Engineering";
Academic Journal of Manufacturing Engineering (invited),
1
(2003),
4;
5
- 6.
-
P.H. Osanna, M.N. Durakbasa:
"Trends in Metrology";
Problems of Engineering Cybernetics and Robotics,
1
(2002),
53;
15
- 24.
-
P.H. Osanna, M.N. Durakbasa, A. Afjehi-Sadat:
"LIFE CYCLE ASSESSMENT AND MODERN METROLOGY FOR QUALITY MANAGEMENT SYSTEMS IN INDUSTRY";
International Journal of Production Engineering and Computers,
6
(2004),
7;
29
- 38.
-
P.H. Osanna, M.N. Durakbasa, A. Afjehi-Sadat:
"Structure Measurement of Workpiece Surfaces at High Precision Machining";
Manufacturing Technology,
IV
(2004),
IV;
68
- 74.
-
P.H. Osanna, M.N. Durakbasa, M. Cakmakci, R. Oberländer:
"Cylindricity - A Well Known Problem and New Solutions";
International Journal of Machine Tools & Manufacture,
32
(1992),
1/2;
91
- 97.
-
P.H. Osanna, M.N. Durakbasa, L. Crisan, J.M. Bauer:
"The Management And Exchange Of Knowledge And Innovation In Environments Of Collaborating Small And Medium Sized Enterprises";
Communications of the IBIMA (CIBIMA), Official journal of the International Business Information Management Association,
I
(2009),
Vol.7;
130
- 136.
-
P.H. Osanna, M.N. Durakbasa, L. Kräuter:
"Industrial Metrology and Interchangeable Manufacturing under the Viewpoint of Nanotechnology and Nanometrology";
Problems of Engineering Cybernetics and Robotics,
I
(2008),
59;
60
- 73.
-
P.H. Osanna, M.N. Durakbasa, L. Kräuter:
"Industrial Metrology of the Viewpoint of Nanotechnology and Nanometrology";
Tehnika,
3
(2009),
Vol.9;
9
- 16.
-
P.H. Osanna, M.N. Durakbasa, L. Kräuter:
"Modern Industrial Fabrication and Manufacturing on Basis of Computer Aided Economic Design, Construction, Production, Metrology and Quality Management";
Academic Journal of Manufacturing Engineering,
Volume 6
(2008),
4/2008;
97
- 101.
-
P.H. Osanna, M.N. Durakbasa, H. Tahirova:
"Intelligent Flexible Dissassembly and Recycling of Used Products to SupportTotal Quality Management and Sustainability in European Indusry";
International Journal Total Quality Management & Excellence,
I
(2005),
3 Vol. 33;
1
- 4.
-
P.H. Osanna, M.N. Durakbasa, G. Vagszegi:
"Laser optical roughness measurement";
Measurement,
1
(1988),
Volume 6, Issue 1;
33
- 36.
-
P.H. Osanna, K. Rezaie, M.N. Durakbasa, C.p. Heiss:
"Form measurements - A bridge between production metrology and biomechanics";
International Journal of Machine Tools & Manufacture,
Vol.35
(1995),
165
- 168.
-
P.H. Osanna, E. Sarigül, M.N. Durakbasa, R. Oberländer:
"Tasterwechselsysteme für Koordinatenmessgeräte";
F & M. Feinwerktechnik, Mikrotechnik, Messtechnik,
1, Vol. 101
(1993),
10;
385
- 390.
-
P.H. Osanna, E. Sarigül, M.N. Durakbasa, A. Osanna:
"The Role Of Databanks For Artificial Intelligence Based Measurement And Control In Computer Integrated Production";
WIT Transactions on Information and Communication Technologies,
Volume 6
(1994),
471
- 478.
More information
-
P.H. Osanna, G. Slanar, M.N. Durakbasa:
"Messtechnik als Grundlage für die Steigerung der Qualität und Umweltverträglichkeit technischer Produkte und Anlagen";
e&i,
1
(2003),
N.5;
143
- 148.
-
A. Otto, R. Ebert:
"Simulationsgestützte Analyse des Übergangs zwischen Laser-strahlschweißen und -abtragsschneiden";
Journal of the University of Applied Sciences Mittweida (invited),
4
(2015),
56
- 59.
More information
-
A. Otto, R. Gómez Vázquez, U. Hartel:
"Insight into the Process: Analysis of laser beam welding by means of multiphysical process simulations";
Laser Technik Journal (invited),
AKL'18 International Laser Technology Congress
(2018),
15/2;
40
- 45.
More information
-
A. Otto, H. Koch et al.:
"Numerical Simulation - A Versatile Approach for Better Understanding Dynamics in Laser Material Processing";
Physics Procedia (invited),
Part 2
(2011),
ISSN: 1875-3892;
11
- 20.
More information
-
A. Otto, A. Patschger, M. Seiler:
"Numerical and Experimental Investigations of Humping Phenomena in Laser Micro Welding";
Physics Procedia,
83
(2016),
1415
- 1423.
More information
-
H. Pasic, M. Pudar, N. Enzinger, J. Ivanova, J. Bruckner, S. Hampel, G. Liedl, W. Karner, G. Figner, T. Weirather, A. Leitner:
"Einsatz unterschiedlicher Schweißverfahren zum Verbinden von Stahl mit Aluminium im Karosseriebau";
Schweiss-&Prüftechnik,
Sonderband
(2009),
25
- 27.
More information
-
R. Petkovsek, V. Novak, F. Bammer, J. Mozina, B. Podobnik:
"Power scaling of AOM-switched lasers with SCPEM-based time-multiplexing";
Optics Express,
19
(2011),
21;
19855
- 19860.
More information
-
R. Petkovsek, J. Saby, F. Salin, T. Schumi, F. Bammer:
"SCPEM-Q-switching of a fiber-rod-laser";
Optics Express,
20
(2012),
7;
7415
- 7421.
More information
-
K. Pfadenhauer, B. Kittl:
"Prozessmanagement in serviceorientierten Architekturen";
ERP Management (invited),
1
(2006),
1;
40
- 42.
More information
-
D. Pohselt, C. Dorn, I. Kovacic, C. Achammer, F. Bleicher:
"Genen den Strom";
Industriemagazin (invited),
04/10
(2010),
4;
44
- 47.
More information
-
G. Pop, L. Crisan, M. Tripa, M.N. Durakbasa:
"Iso Checker, An Android Application For Fit Calculation According To The Latest Iso Gps Standards";
Acta Technica Napocensis,
1
(2018),
Vol. 61, Issue IV;
781
- 786.
More information
-
R. Pospichal, R. Bielak, G. Liedl:
"SCWTEX - Simultaneous Cutting And Welding Of Textiles";
ACTA TECHNICA CORVINIENSIS - Bulletin of Engineering,
1
(2012),
117
- 121.
More information
-
R. Pospichal, G. Liedl:
"Laser ablation of polyethylene terephthalate non-woven fabrics";
Annals Of Faculty Engineering Hunedoara - International Journal Of Engineering,
1
(2014),
12;
63
- 68.
More information
-
R. Pospichal, G. Liedl:
"Simulation of periodic nanostructures fabricated by multi-beam interference of an ultra-short pulse laser";
Tehnicki Vjesnik-Technical Gazette,
20
(2013),
1;
131
- 136.
More information
-
R. Pospichal, G. Liedl:
"Simulation Of The Resulting Intensity Distribution By Multi‐beam Interference Of An Ultra‐short Pulse Laser";
ACTA TECHNICA CORVINIENSIS - Bulletin of Engineering,
5
(2012),
4;
85
- 90.
More information
-
W. Prähauser, F. Bleicher:
"Innovation meets Education 2012";
Online - zerspanungstechnik.com,
11.03.2013
(2013),
2 pages.
-
V. Pryanichnikov, B. Katalinic, A. Platonov:
"Application of autonomius mobile robots AMUR for modelling of elements of selforganising systems";
Intelligent and Adoptive Robots (invited),
Vol.6
(2011),
1-2;
8
- 18.
-
F. Puschitz, F. Bleicher:
"Auf der Pole-Position";
Inspect,
06
(2009),
42
- 43.
-
F. Puschitz, F. Bleicher:
"Bestimmung des Bearbeitungsgrats";
Quality Engineering,
05
(2009),
22.
-
F. Puschitz, F. Bleicher:
"Maschinenabnahme einer Anlage zum elektrochemischen Fräsen mit Hilfe Nexiv VMR 3020";
Industrial Quality,
01
(2011),
28
- 29.
More information
-
F. Puschitz, F. Bleicher:
"Mit Linse und Laser";
Quality Engineering,
7-8
(2008),
72
- 73.
More information
-
F. Puschitz, F. Bleicher, T. Mikats:
"CNC-Lösung Made by B&R";
Automotion,
11
(2009),
54
- 57.
More information
-
R. Rao, D. Singh, F. Bleicher, C. Dorn:
"Weighted Euclidean distance-based approach as a multiple attribute decision making method for manufacturing situations";
International Journal of Multicriteria Decision Making (invited),
International Journal of Multicriteria Decision Making
(2012),
3;
225
- 240.
-
K. Rezaie, P.H. Osanna, M.N. Durakbasa:
"Anwendung der Koordinatenmesstechnik bei der Erfassung, Berechnung und Optimierung der Form von Endoprothesen";
Elektrotechnik & Informationstechnik,
111. Jg.
(1994),
H. 4;
187
- 188.
-
M. Ripoll, F. Heindl, C. Lechner, V. Totolin, M. Jech, F. Bleicher:
"Enhanced Sliding Wear Resistance of Technical Alloys by Hard Particle Reinforcement Using Machine Hammer Peening";
Tribology Transactions (invited),
May
(2016).
-
M. Rodríguez Ripoll, F. Heindl, C. Lechner, Ch. Habersohn, M. Jech, F. Bleicher:
"Improving the wear resistance of functional surfaces using the machine hammer peening technique";
Tribology - Materials, Surfaces & Interfaces (invited),
Volume 8
(2014),
1;
21
- 26.
-
C. Rösner, F. Steiner:
"Beinbruch macht erfinderisch";
Wiener Zeitung,
02.01.2014
(2014),
1 pages.
-
B. Sagbas, M.N. Durakbasa:
"Effect of surface patterning on frictional heating of vitamin E blended UHMWPE";
Wear,
Issues 1-2
(2013),
Volume 303;
313
- 320.
More information
-
B. Sagbas, M.N. Durakbasa:
"Evaluating Frictional Temperature Rise in Sliding Surface of Artificial Hip Joint Materials with Different Loading Conditions";
Acta Physica Polonica A,
Vol. 123 (2013)
(2013),
2;
453
- 455.
-
B. Sagbas, M.N. Durakbasa:
"Measurement of Wear in Orthopedic Prosthesis";
Acta Physica Polonica A,
1
(2012),
Vol. 121, No. 1;
4 pages.
-
B. Sagbas, M.N. Durakbasa:
"Modelling and optimization of biotribological testing parameters on frictional heating of vitamin E blended UHMWPE with the help of statistical techniques";
Measurement,
Volume 54
(2014),
249
- 255.
-
B. Sagbas, M.N. Durakbasa:
"Surface Texturing of Vitamin E Blended UHMWPE for Reduction of Wear";
Acta Physica Polonica A,
1, Volume 125
(2014),
2;
481
- 483.
-
B. Sagbas, M.N. Durakbasa:
"Third-Body Wear Behavior of Orthopedic Biopolymers";
International Journal of Mining, Materials and Metallurgical Engineering (IJMMME),
1
(2016),
Volume 2;
1
- 7.
More information
-
G. Scharinger-Urschitz, H. Walter, J. Brier:
"Experimental investigation on bimetallic tube compositions for the use in latent heat thermal energy storage units";
Energy Conversion and Management,
125
(2016),
368
- 378.
-
P. Schörghofer, N. Leder, F. Bleicher, H.-C. Möhring, G. Sachs:
"Werkzeug "Mit Gefühl"";
Im Mittelpunkt (invited),
x
(2018).
-
K. Schröder, G. Liedl et al.:
"Measurement and Modelling of Ozone and NOx Emissions during CO2 Laser Beam Welding";
Lasers in Engineering,
5
(1997),
313
- 328.
-
A. Scrinzi, V. Yakovlev, O. Smirnova, F. Bammer:
"Attosecond streaking measurements";
Journal of Modern Optics (invited),
Vol 52
(2005),
2-3;
395
- 410.
More information
-
P. Sejc, R. Bielak et al.:
"Computer simulation of heat affected zone during MIG brazing of zinc-coated steel sheets";
Kovove Materialy - Metallic Materials,
44
(2006),
225
- 234.
-
P. Smolek, I. Leobner, G. Gourlis, B. Mörzinger, B. Heinzl, K. Ponweiser:
"Hybrid Building Performance Simulation Models for Industrial Energy Efficiency Applications";
Journal of Sustainable Development of Energy, Water and Environment Systems,
In Press
(2017),
1
- 13.
More information
-
R. Spietschka, F. Bleicher:
"Strömungssimulation in der Reinraumtechnik";
GIT ReinRaum Technik,
3/01
(2001),
14
- 16.
-
D. Stehle, A. Schmid, M. Oechsner, F. Bleicher, T. Flatz:
"Strukturieren von Stahlproben zur Steigerung der Haftfestigkeit einer thermisch gespritzten Kupferbasislegierung zur Untersuchung der Einsatzpotenziale an lagerschalenlosen Pleuelstangen";
Thermal Spray Bulletin (invited),
2
(2013),
110
- 116.
-
F. Steiner:
""Start-up-Steckbrief": Vom Beinbruch zum Start-up - Clever Contour";
DiePresse.com,
vom 03.02.15
(2015),
2 pages.
-
F. Steiner:
"Erfinder für flexible Fertigung";
report.at,
03.05.2013
(2013),
3 pages.
-
F. Steiner:
"Vom Beinbruch zum Patienten";
A plus B Academia plus Business - Leistungsbericht 2013,
05
(2014),
27.
-
F. Steiner, F. Bleicher:
"Freiformen im sphärischenn Biegekopf - Ein thermoplastisches Umformverfahren erweitert die Designfreiheit um ein Vielfaches";
Kunststoffe,
106. Jahrgang
(2016),
1;
56
- 59.
-
A. Stockinger, E. Gütl, S. Rath, D. Strasser, M. Bicher, A. Körner, H. Ecker:
"Direct Implementation of ARGESIM Benchmark C7 'Constrained Pendulum' in MATLAB and EXCEL";
Simulation Notes Europe,
29
(2019),
2;
105
- 110.
More information
-
S. Stojadinovic, M.N. Durakbasa, S.T. Zivanovic:
"An Optimized and Virtual on-Machine Measurement Planning Model";
FME Transactions,
1
(2020),
48;
745
- 752.
More information
-
S. Stojadinovic, V. Majstorovic, M.N. Durakbasa:
"Toward a cyber-physical manufacturing metrology model for industry 4.0";
Ai Edam-Artificial Intelligence For Engineering Design Analysis And Manufacturing,
1
(2020),
1
- 17.
More information
-
S. Stojadinovic, V. Majstorovic, M.N. Durakbasa, T. Sibalija:
"Towards an Intelligent Approach for CMM Inspection Planning of Prismatic Parts";
Measurement,
1
(2016),
##.
More information
-
S. Stojadinovic, V. Majstorovic, M.N. Durakbasa, V. Sibalija:
"Ants Colony Optimisation Of A Measuring Path Of Prismatic Parts On A Cmm";
Metrology And Measurement Systems,
23
(2016),
1;
119
- 132.
More information
-
S. Stojadinovic, V. Majstorovic, A. Gaska, J. Sładek, M.N. Durakbasa:
"Development of a Coordinate Measuring Machine-Based Inspection Planning System for Industry 4.0";
Applied Sciences,
1
(2021),
11(18), 8411;
1
- 18.
More information
-
S. Stojadinovic, S.T. Zivanovic, N. Slavkovic, M.N. Durakbasa:
"Digital measurement twin for CMM inspection based on step-NC";
International Journal of Computer Integrated Manufacturing,
1
(2021),
VOL. 34, NO. 12;
1327
- 1347.
More information
-
K.J. Stout, M.N. Durakbasa, P.H. Osanna:
"Quality assurance - Have we specified it the wrong way around?";
Wear,
5/6
(2009),
266;
511
- 514.
-
S. Tatra, R. Gómez Vázquez, C. Stiglbrunner, A. Otto:
"Numerical Simulation of Laser Ablation with Short and Ultra-short Pulses for Metals and Semiconductors";
Physics Procedia,
83
(2016),
1339
- 1346.
More information
-
Y. Tsai, K. Leitz, A. Otto et al.:
"Parallel optical trap assisted nanopatterning on rough surfaces";
Nanotechnology,
1
(2012),
23;
1
- 5.
More information
-
S. Vanli, A. Akdogan, M.N. Durakbasa:
"Process Optimization and Surface Modification of Die Casting AZ91 Magnesium Alloy Products";
Acta Physica Polonica A,
1
(2018),
Vol. 134;
32
- 36.
More information
-
S. Vanli, A. Akdogan, K. Kerber, S. Özbek, M.N. Durakbasa:
"Smart Die Casting Foundry According To Industrial Revolution 4.0";
Acta Technica Napocensis (invited),
1
(2018),
Vol. 61, Issue IV;
787
- 792.
More information
-
S. Vanli, A. Günay, A. Akdogan, M.N. Durakbasa:
"Optimum Process Parameters During End Milling Operation Of Aisi H13 Steel For High Surface Quality";
Academic Journal of Science,
03
(2014),
02;
233
- 240.
-
M. Vrabel, M.N. Durakbasa, P. Kovac, I. Mankova:
"Contribution to the FEM simulation of Ti6Al4V Machining";
Acta Mechanica Slovaca,
1
(2017),
Volume 21 No.1/2017;
54
- 60.
-
M. Vrabel, I. Mankova, M.N. Durakbasa:
"Effect of Honing Parameters on Generated Surface Quality of Cylinder Liner within Automotive Engine Production";
Solid State Phenomena Trans Tech Publications,
1
(2017),
261;
189
- 194.
More information
-
K. Wichart, J. Ivanova, J. Bruckner, N. Enzinger, G. Figner, G. Liedl, H. Basalka, A. Leitner:
"Einsatz von Bimetallen für Hybridverbindungen";
Schweiss-&Prüftechnik,
Sonderband
(2009),
28
- 31.
More information
-
M. Wiesauer, Ch. Habersohn, F. Bleicher:
"Validation of a Coupled Simulation for Machine Tool Dynamics Using a Linear Drive Actuator";
JMMP (invited),
Volume 5/ISSUE1
(2020).
-
G. Wiesinger, C. Baumann, M. Krystian:
"Impact of Equal Channel Angular Pressing (ECAP) on the machinability of an aluminium alloy (EN AW-6082)";
Materials Today: Proceedings (invited),
5
(2017),
13;
26654
- 26660.
-
C. Yurci, A. Akdogan, M.N. Durakbasa:
"Investigation of Effects (Welding Sequence, Fixturing, Welding Points) on Distortions after Spot Welding for Determining Individual and Cumulative Tolerances";
Elsevier ScienceDirect IFAC-PapersOnLine,
Volume 49
(2016),
Issue 29.
More information
-
C. Yurci, A. Gunay Bulutsuz, M.N. Durakbasa:
"Performance Determination and Calibration of CMMs on the Basis of GPS Standards";
Quality-Access to Success,
Vol.13, S5, November 2012
(2012),
291
- 298.
More information
-
C. Zauner, F. Hengstberger, B. Mörzinger, R. Hofmann, H. Walter:
"Experimental characterization and simulation of a hybrid sensibile-latent heat storage";
Applied Energy,
189
(2017),
506
- 519.
-
R. Zemann:
""Federn lassen" mit Carbon";
Technikreport (invited),
11
(2013),
58.
-
R. Zemann:
"Aufbohrbedarf gesucht";
Factory (invited),
06/2014
(2014),
22
- 24.
-
R. Zemann:
"Benchmark 2014 der TU Wien - Werkzeuge für Verbundmaterialien im Test";
MAV Innovationen der spanenden Fertigung (invited),
04
(2015),
2 pages.
-
R. Zemann:
"Faserwerkstoffe: Federleicht";
Online - innovationsreport.de,
18.11.13
(2013),
2 pages.
-
R. Zemann:
"Federherstellung aus leichten Faserwerkstoffen";
www.derStandard.at,
18.11.13
(2013).
-
R. Zemann:
"Federleicht - Masseeinsparung ist ein wichtiges Thema";
Österreich Journal,
125
(2013),
1 pages.
-
R. Zemann:
"Federleicht - Weg mit überflüssigen Kilos";
TU Bulletin,
18.02.13
(2013),
97;
2 pages.
-
R. Zemann:
"Federleichte Federn aus Karbon offenbar ohne jede Ermüdung";
Online - ingenieur.de,
19.11.13
(2013),
2 pages.
-
R. Zemann:
"Federn aus Faser-Kunststoff statt aus Stahl";
Online - futurezone.at,
18.11.13
(2013),
2 pages.
-
R. Zemann:
"Federung - Federleichte Federn";
konstruktionspraxis.vogel.de,
11.12.13
(2013),
2 pages.
-
R. Zemann:
"Fotostrecke Fibrecut: Die besten Zerspaner bei FKV";
Online factorynet.at (invited),
20.06.2014
(2014),
1 pages.
-
R. Zemann:
"Herstellungsverfahren für Federn aus Fasern entwickelt";
Online - science.apa.at,
18.11.13
(2013),
1 pages.
-
R. Zemann:
"Leicht, leichter, Fibrecut!";
Technik Report (invited),
Technik Report - Band 6
(2013),
6;
22
- 23.
-
R. Zemann:
"Leichte Werkstoffe, schwere Aufgaben";
Österreichische Betriebstechnik,
3/4
(2014),
46
- 47.
-
R. Zemann:
"Leichte Werkstoffe, schwere Aufgaben";
Online - innovationsreport.de,
20.02.2014
(2014),
2 pages.
-
R. Zemann:
"Leichte Werkstoffe, schwere Aufgaben";
Online - myScience.at,
19.02.2014
(2014),
3 pages.
-
R. Zemann:
"Leichte Werkstoffe, schwere Aufgaben";
TU Wien Presseaussendung,
19.02.2014
(2014),
1
- 4.
-
R. Zemann:
"Leichte Werkstoffe, schwere Aufgaben";
Online - WorldNews (WN),
19.02.2014
(2014),
1 pages.
-
R. Zemann:
"Leichte Werkstoffe, schwere Aufgaben";
Österreich Journal,
128/27.02.14
(2014),
2 pages.
-
R. Zemann:
"Produktion_Federleicht";
Factory,
Dez.-Jän. 2013-2014
(2013),
121.
-
R. Zemann:
"Spezielle Bearbeitungsmethoden der TU Wien für Faserverbundmaterialien";
VDWF im Dialog (invited),
1
(2014),
1 pages.
-
R. Zemann:
"Technologietransfer zum gegenseitigen Nutzen - Messeguide zur TUday14";
Der Standard (invited),
Promotionsbeilage zur Tageszeitung
(2014),
49
- 50.
-
R. Zemann:
"TU Wien testet die besten Zerspaner";
Werk & Technik (invited),
3-4
(2015),
12.
-
R. Zemann, F. Bleicher, R. Zisser-Pfeifer:
"Praxiserfahrungen mit der Technologie der elektrochemischen Mikrobearbeitung mit ultrakurzen Pulsen";
Galvanotechnik,
103
(2012),
4;
722
- 725.
-
R. Zemann, R. Hufschmied:
"Auf der Suche nach der Benchmark";
Carbon Composites Magazin,
2
(2013),
37.
Editorials in Scientific Journals
-
D. Majstorovic, M.N. Durakbasa:
"The TQM Journal";
The TQM Journal,
1
(2016),
Vol. 28 Iss: 5.
More information
-
M. Reiter, F. Bleicher:
"Affectation of chip formation in single-lip deep hole drilling at small diameters by application of low-frequency vibration support";
MM Science Journal (invited),
2019-045
(2019),
3107
- 3113.
Contributions to Books
-
A. Afjehi-Sadat, M.N. Durakbasa, P.H. Osanna:
"Design and manufacture of measuring instruments (chapter 6)";
in: "Measurement in Technology - Volume I",
issued by: Vienna University of Technology;
TU Wien,
2005,
ISBN: 80-89112-05-6,
153
- 167.
-
A. Afjehi-Sadat, M.N. Durakbasa, K.J. Stout, P.H. Osanna, J.M. Ruiz:
"Measurement of surface roughness, waviness and the primary profile (chapter 13)";
in: "Measurement in Technology - Volume II",
issued by: Vienna University of Technology;
TU Wien,
2005,
ISBN: 80-89112-05-6,
382
- 403.
-
A. Afjehi-Sadat, P.H. Osanna:
"Importance of Standardization for Successful Development of Nanotechnology";
in: "Production Process in Mechanical Engineering",
W. Zebala, J. Beno (ed.);
Cracow University of Technology - Technical University of Kosice,
Cracow,
2007,
ISBN: 978-83-7242-428-0,
43
- 46.
-
A. Afjehi-Sadat, P.H. Osanna, J. Kundrak, V. Bana:
"Evaluation of 3D Surface Topography of Hard Turned and Ground Gear's Bore Holes";
in: "Production Process in Mechanical Engineering Research Reports",
issued by: Cracow University of Technology - Technical University of Kosice;
Cracow University of Technology - Technical University of Kosice,
Slovakia,
2006,
ISBN: 80-8073-568-9,
141
- 146.
-
A. Akdogan, S. Vanli, M.N. Durakbasa:
"Re-engineering of Manufacturing Parts by Computed Tomography Data";
in: "Proceedings of the 12th International Conference on Measurement and Quality Control - Cyber Physical Issue, IMEKO TC 14 2019 - Part of the Lecture Notes in Mechanical Engineering book series (LNME)",
V. Majstorovic, M.N. Durakbasa (ed.);
Springer International Publishing AG,
2019,
ISBN: 978-3-030-18176-5,
1
- 11.
More information
-
F. Akhavei, P. Kreuzer:
"An Approach to Increase the Agility in Single-Item Production Systems";
in: "Daaam International Scientific Book 2016",
B. Katalinic (ed.);
issued by: DAAAM;
DAAAM International Vienna,
Wien,
2016, (invited),
ISSN: 1726-9687,
77
- 92.
-
I. Ayatollahi, M. Hackhofer, B. Kittl, F. Pauker:
"New approach for oee calculation of Cnc machines based on OPC UA";
in: "DAAAM International Scientific Book 2013",
DAAAM International Vienna,
Wien,
2013,
ISBN: 978-3-901509-94-0,
895
- 902.
-
H. Bagci, B. Sagbas, M.N. Durakbasa:
"Effect of Direct Metal Laser Sintering Process Parameters on Dimensional Accuracy of AlSi10Mg Parts";
in: "DAAAM International Scientific Book 2020, Chapter 13, ISSN 1726-9687",
1;
B. Katalinic (ed.);
DAAAM International Vienna,
Wien,
2020,
ISBN: 978-3-902734-27-3,
171
- 180.
More information
-
F. Bammer:
"Single Crystal Photo-Elastic Modulators";
in: "High-Power and Femtosecond Lasers: Properties, Materials and Applications",
F. Columbus (ed.);
issued by: Paul-Henri Barret, Michael Palmer;
Nova Science Publishers, Inc,
2009,
ISBN: 978-1-60741-009-6,
71
- 123.
More information
-
F. Bammer, T. Schumi, J. Carballido Souto, J. Bachmair, D. Feitl, I. Gerschenson, M. Paul, A. Nessmann:
"Q-Switching with Single Crystal Photo-Elastic Modulators";
in: "Laser Systems for Applications",
InTech,
2011,
ISBN: 978-953-307-429-0,
14 pages.
More information
-
G. Bas, W. Pirker, L. Kräuter, E. Güclü, L. Durakbasa:
"Developments in Biomedical Techniques Through Digital Transformation of Industry 4.0 - Applications in Tissue and Dental Implants";
in: "Proceedings of the International Symposium for Production Research 2018",
Springer,
2018,
ISBN: 978-3-319-92267-6,
391
- 401.
More information
-
A. Bauer, G. Bas, M.N. Durakbasa, L. Kräuter, G. Ugur-Tüncer:
"Measurement Technology & Quality & Justicia in Industry 4.0";
in: "Proceedings of the International Symposium for Production Research 2018",
Springer,
2018,
ISBN: 978-3-319-92267-6,
438
- 450.
More information
-
D. Berger:
"Bearbeitung faserverstärkter Materialien";
in: "HPM - High Performance Manufacturing",
F. Bleicher, J. Kopac, L. Meyer, V. Stich (ed.);
issued by: Institut für Fertigungstechnik;
Institut für Fertigungstechnik,
Wien,
2008,
ISBN: 978-3-200-01355-1,
169
- 184.
-
D. Berger, F. Bleicher, C. Dorn, F. Puschitz:
"Optimised Machining of fibre reinforced materials";
in: "DAAAM International Scientific Book 2008",
B. Katalinic (ed.);
issued by: Publisher DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2008,
ISBN: 3-901509-69-0.
-
J. Bernreiter, C. Dorn, I. Ibrishimov, R. Zisser-Pfeifer, N. Herzig:
"Optimierung des Tieflochbohrprozesses von hochlegierten Stählen";
in: "HPM - High Performance Manufacturing",
F. Bleicher, J. Kopac, L. Meyer, V. Stich (ed.);
issued by: Institut für Fertigungstechnik;
Institut für Fertigungstechnik,
Wien,
2008,
ISBN: 978-3-200-01355-1,
142
- 168.
-
P. Blecha, M.N. Durakbasa, M. Holub:
"Digitized Production - Its Potentials and Hazards";
in: "Proceedings of the International Symposium for Production Research 2018",
Springer,
2018,
ISBN: 978-3-319-92267-6,
402
- 411.
More information
-
F. Bleicher:
"Werkzeugmaschinen mit parallelkinematischen Strukturen";
in: "Taschenbuch der Werkzeugmaschinen",
K.-J. Conrad (ed.);
Carl Hanser Verlag,
2002,
ISBN: 3-446-21859-9,
787
- 792.
-
F. Bleicher, C. Dorn, M. Stark:
"Performance analysis of machine tools";
in: "Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education"",
B. Katalinic (ed.);
issued by: DAAAM international Vienna;
DAAAM International Vienna,
Vienna,
2009,
ISBN: 978-3-901509-70-4,
1793
- 1794.
More information
-
F. Bleicher, N. Herzig:
"Zusammenhang zwischen dynamischen Werkstoffkennwerten und spezifischer Schnittkraft";
in: "HPM - High Performance Manufacturing",
F. Bleicher, J. Kopac, L. Meyer, V. Stich (ed.);
issued by: Institut für Fertigungstechnik;
Institut für Fertigungstechnik,
Wien,
2008,
ISBN: 978-3-200-01355-1,
68
- 89.
-
F. Bleicher, B. Kittl:
"Manufacturing Execution Systems für die spanende Fertigung";
in: "Spanende Fertigung",
D. Biermann (ed.);
Vulkan-Verlag,
Essen,
2012,
ISBN: 978-3-8027-2965-2,
412
- 418.
-
F. Bleicher, C. Kumpf:
"Schwingungsunterstützte Zerspanung";
in: "Spanende Fertigung",
7. Auflage;
issued by: Dirk Biermann;
Vulkan Verlag,
2017, (invited),
ISBN: 9783802729898,
37
- 47.
-
F. Bleicher, G. Wiesinger, C. Kumpf, D. Finkeldei, C. Baumann, C. Lechner:
"Vibration assisted drilling of CFRP/metal stacks at low frequencies and high amplitudes";
in: "Production Engineering Research and Development",
Springer-Verlag,
2018, (invited),
ISSN: 0944-6524.
-
O. Bodur, G. Poszvek, E. Walcher, M.N. Durakbasa, J.M. Bauer:
"Intelligent Design and Advanced Precision Metrology on the Geometrical Structure of Medical Needles Based on GPS and ISO Standards";
in: "Digital Conversion on the Way to Industry 4.0 - Lecture Notes in Mechanical Engineering",
1;
M.N. Durakbasa, G. Gencyilmaz (ed.);
issued by: Springer Nature Switzerland AG;
Springer Nature Switzerland AG,
Cham, Switzerland,
2020,
ISSN: 2195-4364,
346
- 362.
More information
-
O. Bodur, E. Walcher, M.N. Durakbasa, D. Sterca:
"Implementation Of An Eco-Design Process To Minimize Negative Environmental Impacts - Case Study";
in: "DAAAM International Scientific Book 2021",
ISSN: 1726-9687;
B. Katalinic (ed.);
issued by: Daaam International Vienna;
DAAAM International,
Wien,
2021,
ISBN: 978-3-902734-31-0,
117
- 130.
More information
-
I. Bögrekci, P. Demircioglu, H. Sucuoglu, E. Guven, N. Demir, M.N. Durakbasa:
"Structural and Modal Analyses of Naca 66-206 Aircraft Wing Model";
in: "Proceedings of the International Symposium for Production Research 2019, Lecture Notes in Mechanical Engineering (LNME)",
1;
Springer Nature Switzerland AG,
Cham,
2019,
ISBN: 978-3-030-31342-5,
182
- 191.
More information
-
I. Bogrekci, P. Demircioglu, M.N. Durakbasa:
"Comparison between 3D Digital and Optical Microscopes for the Surface Measurement using Image Processing Techniques";
in: "Laser Metrology for Precision Measurement and Inspection in Industry (LMPMI) 2011",
issued by: VDI Berichte Nr. 2156;
VDI Verlag GmbH,
Düsseldorf,
2011,
ISSN: 0083-5560,
39
- 47.
-
I. Bogrekci, P. Demircioglu, H. Sucuoglu, E. Altun, B. Sakar, M.N. Durakbasa:
"Topology Optimization of a Tensile Test Specimen";
in: "Daaam International Scientific Book 2020",
1 ISSN 1726-9687;
B. Katalinic (ed.);
issued by: Daaam International;
DAAAM International,
Wien,
2020,
ISBN: 978-3-902734-27-3,
99
- 112.
More information
-
M. Cassimatis, P.H. Osanna, A. Afjehi-Sadat, J.M. Ruiz:
"Measurement of torque (chapter 20)";
in: "Measurement in Technology - Volume II",
issued by: Vienna university of Technology;
TU Wien,
2005,
ISBN: 80-89112-05-6,
522
- 531.
-
I. Cavusoglu, E. Walcher, G. Ugur Tuncer, M.N. Durakbasa:
"Effects of the Fiber Percentage Rate of the GFPR Composites";
in: "DAAAM Scientific Book 2016",
1;
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Vienna,
2016, (invited),
ISBN: 978-3-902734-09-9,
335
- 342.
-
P. Demircioglu, I. Bögrekci, B. Sevinc, M.N. Durakbasa:
"Improving Manufacturing Process of Mobile Recorder";
in: "Digital Conversion on the Way to Industry 4.0 - Selected Papers from ISPR2020, Lecture Notes in Mechanical Engineering",
ISSN 2195-4356;
Springer Nature Switzerland AG,
Cham, Switzerland,
2021,
ISBN: 978-3-030-62783-6,
504
- 512.
More information
-
P. Demircioglu, I. Bogrekci, M.N. Durakbasa, N. Demir, U. Kose:
"Surface Topological Investigation of Seal Bushing by Using Chromium PlatingProcess";
in: "Proceedings of the 12th International Conference on Measurement and Quality Control - Cyber Physical Issue, IMEKO TC 14 2019 - Lecture Notes in Mechanical Engineering (LNME)",
Springer International Publishing AG,
2019,
ISBN: 978-3-030-18176-5,
98
- 106.
More information
-
P. Demircioglu, I. Bogrekci, S. Gönülcan, M.N. Durakbasa:
"Tensile Test Specimen For Different Test Specimen Geometries";
in: "Daaam International Scientific Book 2021",
ISSN 1726-9687;
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International,
Wien,
2021,
ISBN: 978-3-902734-31-0,
107
- 116.
More information
-
T. Dobra, F. Thajer, G. Wiesinger, D. Vollprecht, R. Pomberger:
"Selective delamination by milling as a first step in the recycling of photovoltaic modules";
in: "Environmental Technology",
issued by: Published by Informa UK Limited, trading as Taylor & Francis Group;
Taylor & Francis Group,
2022, (invited),
9 pages.
-
S. Dönmezer:
"Measurements of a Finished Garment Using 3D Laser Image Processing";
in: "Digital Conversion on the Way to Industry 4.0 - Lecture Notes in Mechanical Engineering",
ISSN 2195-4356;
M.N. Durakbasa, G. Gencyilmaz (ed.);
issued by: Springer Nature Switzerland AG;
Springer Nature Switzerland AG,
Cham, Switzerland,
2021,
ISBN: 978-3-030-62783-6,
162
- 174.
More information
-
C. Dorn:
"Automatisierung von Entgratprozessen";
accepted for publication in: "HPM - High Performance Manufacturing",
F. Bleicher, J. Kopac, L. Meyer, V. Stich (ed.);
issued by: Institut für Fertigungstechnik;
Institut für Fertigungstechnik,
Wien,
2008,
ISBN: 978-3-200-01355-1,
194
- 210.
-
C. Dorn, F. Bleicher, C. Einspieler:
"Verbesserung der Maschinengenauigkeit";
in: "HPM - High Performance Manufacturing",
F. Bleicher, J. Kopac, L. Meyer, V. Stich (ed.);
issued by: Institut für Fertigungstechnik;
Institut für Fertigungstechnik,
Wien,
2008,
ISBN: 978-3-200-01355-1,
128
- 141.
-
Á. Drégelyi-Kiss, M.N. Durakbasa:
"Measurement Error on the Reconstruction Step in Case of Industrial Computed Tomograph";
in: "Proceedings of the International Symposium for Production Research 2018",
1;
M.N. Durakbasa, G. Gencyilmaz (ed.);
issued by: Springer Nature Switzerland AG;
Springer International Publishing AG,
Cham, Switzerland,
2019,
ISBN: 978-3-319-92267-6,
309
- 323.
More information
-
M.N. Durakbasa:
"Accreditation and Certification - Quality Education at the Universities";
in: "Metrology and Statistics in Accreditation and Certification",
1;
Proceedings Metrology and Statistics in Accreditation and Certification / Basic Course on Quality Assurance,
Bratislava,
1999,
ISBN: 80-967558-6-2,
25
- 29.
More information
-
M.N. Durakbasa:
"Geometrical Product Specification";
in: "Proceedings of the 12th International Conference on Measurement and Quality Control - Cyber Physical Issue, IMEKO TC 14 2019 - Lecture Notes in Mechanical Engineering (LNME)",
Springer International Publishing AG,
2018,
10
- 20.
-
M.N. Durakbasa:
"Prüfmitelmanagement und Messtechnik";
in: "Qualitätsmanagement : Leitfaden für Studium und Praxis",
1;
F.J. Brunner, K. Wagner (ed.);
issued by: Carl Hanser Verlag;
Carl Hanser Verlag,
München, Deutschland,
2016,
ISBN: 978-3-446-44712-7,
241
- 270.
-
M.N. Durakbasa:
"Prüfmittelmanagement und Prüfmittelüberwachung in der Koordinatenmesstechnik";
in: "Koordinatenmesstechnik Genauigkeit - Erfahrungen - Innovationen",
issued by: VDI/VDE - Gesellschaft;
VDI Verlag GmbH,
Düsseldorf,
2001,
ISBN: 3-18-091618-4,
157
- 168.
-
M.N. Durakbasa:
"RECHNERUNTERSTÜTZTE INTELLIGENTE PRÜFMITTELVERWALTUNG UND -ÜBERWACHUNG FÜR GEOMETRISCHE GRÖSSEN";
in: "Computer-Aided Systems for Manufacture and Measurement of Machine Elements",
Wydawnictwo,
Kielce, PL,
2003,
ISBN: 83-88906-30-5,
91
- 98.
-
M.N. Durakbasa, A. Afjehi-Sadat, P.H. Osanna:
"Measurement of length, position, dimension (chapter 12)";
in: "Measurement in Technology - Volume II",
issued by: Vienna University of Tecnology;
TU Wien,
2005,
ISBN: 80-89112-05-6,
354
- 381.
-
M.N. Durakbasa, A. Afjehi-Sadat, P.H. Osanna:
"Uncertainty of measurement (chapter 27)";
in: "Measurement in Technology - Volume II",
issued by: Vienna University of Technology;
TU Wien,
2005,
ISBN: 80-89112-05-6,
641
- 662.
-
M.N. Durakbasa, G. Bas, J.M. Bauer:
"Developments in Advanced Production Engineering Enabled By High Precision Metrology";
in: "Development In Machining Technology",
Vol. 6;
Cracow University of Technology,
2016,
ISBN: 978-80-553-2576-7,
144
- 154.
More information
-
M.N. Durakbasa, J.M. Bauer, O. Bodur, G. Poszvek:
"Challenges of Miniaturizing a Precision Gear";
in: "Proceedings of the International Symposium for Production Research 2018",
Springer,
2018,
ISBN: 978-3-319-92267-6,
239
- 253.
More information
-
M.N. Durakbasa, J.M. Bauer, E. Capuano, J. Acosta, J. Diaz:
"The New Paradigm in the Task of Direction-Coordination of Innovative Technological Projects in the Environment of INDUSTRY 4.0";
in: "Proceedings of the International Symposium for Production Research 2019, Lecture Notes in Mechanical Engineering (LNME)",
Springer Nature Switzerland AG,
Cham,
2019,
ISBN: 978-3-030-31342-5,
311
- 318.
More information
-
M.N. Durakbasa, J.M. Bauer, L. Kräuter, G. Bas, G. Poszvek:
"Intelligent Integrated Management and Advanced Metrology for Quality Toward the Factory of the Future";
in: "Proceedings of 3rd International COnference on the Industry 4.0 Model for Advanced Manufacturing",
Springer,
2018,
ISBN: 978-3-319-89563-5,
98
- 108.
More information
-
M.N. Durakbasa, P. Demircioglu, G. Bas:
"Metrological Evaluations at Micro- and Nanoscaled Surface Characteristics via Process Management Approach";
in: "Development of Surface Metrology, Pawel Pawlus (ed.) et al.",
issued by: University of Bielsko-Biala;
Development of Surface Metrology, Pawel Pawlus (ed.) et al.,
Bielsko-Biala, Polen,
2012,
ISBN: 978-83-63713-24-9,
45
- 56.
-
M.N. Durakbasa, P. Demircioglu, J.M. Bauer, I. Bögrekci, G. Bas, O. Bodur, G. Poszvek:
"Additive Miniaturized-Manufactured Gear Parts Validated by Various Measuring Methods";
in: "Proceedings of the 12th International Conference on Measurement and Quality Control - Cyber Physical Issue IMEKO TC 14 2019, Lecture Notes in Mechanical Engineering (LNME)",
Springer International Publishing AG,
2019,
ISBN: 978-3-030-18176-5,
276
- 290.
More information
-
M.N. Durakbasa, P.H. Osanna:
"Developments of Surface Measurement and Evaluation of Biomedical Structures";
in: "Acta Mechanica Slovaca",
F. Trebuna et al. (ed.);
issued by: Faculty of Mechanical Engineering, Technical University in Kosice;
Faculty of Mechanical Engineering, Technical University in Kosice,
Kosice,
2002,
ISSN: 1335-2393,
25
- 29.
-
M.N. Durakbasa, P.H. Osanna, L. Crisan, L. Kräuter:
"Metrologie und Technologie im Nanometer- und Picometer-Bereich";
in: "Science Report",
S. Adamczak, P.H. Osanna (ed.);
issued by: Kielce University of Technology;
Wydawnictwo Politechniki Swietokrzyskiej,
Kielce,
2008,
ISBN: 978-83-88906-57-2,
9
- 19.
-
M.N. Durakbasa, P.H. Osanna, R. Oberländer, G. Kappis:
"The Utilization of CMM's for the Comprehensive Analysis of Macro- and - and Micro-Geometry of Workpieces";
in: "Dimensional Metrology in Production and Quality Control",
T. Pfeifer (ed.);
issued by: Gesellschaft Mess- und Automatisierungstechnik;
VDI Verlag GmbH,
Düsseldorf,
1989,
ISBN: 3-18-090761-4,
119
- 124.
-
M.N. Durakbasa, P.H. Osanna, M.E. Yurci, N. Nomak Akdogan:
"High Precision Measurement and Evaluation of the Fine Mould Surface Structures, in Measurement Technology and Intelligent Instruments";
in: "Measurement Technology and Intelligent Instruments VIII",
E. Armanios, Y. Mai, F. Wöhlbier, M. Golam (ed.);
issued by: Trans Tech Publications Ltd;
Trans Tech Publications Ltd.,
Switzerland,
2008,
ISSN: 1013-9826,
221
- 224.
-
A. Erbul, S. Vanli, A. Akdogan, M.N. Durakbasa:
"Gating System Design And Optimization In Sand Mold Casting Of Cast Irons";
in: "DAAAM International Scientific Book 2017,",
Vol. 16, Chapter 14;
DAAAM International,
2017,
ISSN: 1726-9687,
173
- 190.
More information
-
F. Folkvord, L. Peschke, G. Bas, S. Vitiello, N. Spunda:
"Peer Learning Methodology for Sustainable Energy Usage";
in: "Proceedings of the International Symposium for Production Research 2019, Lecture Notes in Mechanical Engineering book series (LNME)",
M.N. Durakbasa, G. Gencyilmaz (ed.);
Springer Nature Switzerland AG,
Cham, Switzerland,
2019,
ISBN: 978-3-030-31343-2,
62
- 76.
More information
-
G. Geiger, F. Bleicher, F. Puschitz:
"Zerspanungsspezifische Untersuchungen";
accepted for publication in: "HPM - High Performance Manufacturing",
F. Bleicher, J. Kopac, L. Meyer, V. Stich (ed.);
issued by: Institut für Fertigungstechnik;
Institut für Fertigungstechnik,
Wien,
2008,
ISBN: 978-3-200-01355-1,
26
- 41.
-
G. Geiger, C. Dorn, N. Herzig:
"Frässtrategien für Schruppbearbeitung von Stahlguss";
accepted for publication in: "HPM - High Performance Manufacturing",
F. Bleicher, J. Kopac, L. Meyer, V. Stich (ed.);
issued by: Institut für Fertigungstechnik;
Institut für Fertigungstechnik,
Wien,
2008,
ISBN: 978-3-200-01355-1,
114
- 127.
-
G. Geiger, F. Puschitz:
"Verschleiß und Kraftfortschrittsmessung in der Praxis am Beispiel des Stirnplanfräsens";
accepted for publication in: "HPM - High Performance Manufacturing",
F. Bleicher, J. Kopac, L. Meyer, V. Stich (ed.);
issued by: Institut für Fertigungstechnik;
Institut für Fertigungstechnik,
Wien,
2008,
ISBN: 978-3-200-01355-1,
80
- 96.
-
G. Geiger, F. Puschitz, F. Bleicher:
"New approach of determining cutting forces";
accepted for publication in: "DAAAM International Scientific Book 2008",
B. Katalinic (ed.);
issued by: DAAAM International;
DAAAM International Vienna,
Wien,
2008,
ISBN: 3-901509-69-0.
-
Ch. Habersohn:
"Fräsen mit weit auskragendem Werkzeug";
accepted for publication in: "HPM - High Performance Manufacturing",
F. Bleicher, J. Kopac, L. Meyer, V. Stich (ed.);
issued by: Institut für Fertigungstechnik;
Institut für Fertigungstechnik,
Wien,
2008,
ISBN: 978-3-200-01355-1,
185
- 193.
-
Ch. Habersohn, F. Bleicher:
"Controller Concept for a Highly Parallel Machine Tool";
in: "Engineering Transactions",
Polish Academy of Sciences - Institute of Fundamental Technological Research,
Warschau,
2012,
ISSN: 0867-888x,
315
- 332.
-
M. Hasan, J. Svorcan, D. Tanovic, G. Bas, M.N. Durakbasa:
"Conceptual Design and Fluid Structure Interaction Analysis of a Solar Powered High-Altitude Pseudo-Satellite (HAPS) UAV Wing Model";
in: "Digital Conversion on the Way to Industry 4.0 - Selected Papers from ISPR2020, September 24-26, 2020, Lecture Notes in Mechanical Engineering",
ISSN 2195-4364;
Springer Nature Switzerland AG,
Cham, Switzerland,
2020,
ISBN: 978-3-030-62784-3,
13 pages.
More information
-
P. Hergan, C. Lechner, E. Fauster, G. Pilz, R. Schledjewski:
"Minimum invasive production-related SLS specimen manufacturing for interface characterization of hybrid materials made by RTM";
in: "The International Journal of Advanced Manufacturing Technology",
Springer,
2019, (invited),
ISSN: 0268-3768.
-
K. Hrubina, A. Jadlovska, B. Katalinic, E. Wessely:
"Optimal Control Problems for Systems Solved by Algorithms of Algebraic Methods";
in: "DAAAM International Scientific Book 2004",
B. Katalinic (ed.);
issued by: Wien;
DAAAM International Vienna,
Wien,
2004, (invited),
ISBN: 3-901509-38-0,
283
- 294.
-
K. Hrubina, J Novak-Marcincin, A. Jadlovska, B. Katalinic:
"Optimal control of complex processes and vector optimalization";
in: "DAAAM International Scientific Book 2005",
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Vienna,
2005, (invited),
ISBN: 3-901509-43-7,
225
- 252.
-
A. Jadlovska, K. Hrubina, J Novak-Marcincin, B. Katalinic:
"Algorithms for optimal decision making and processes control";
in: "DAAAM International Scientific Book 2005",
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Vienna,
2005, (invited),
ISBN: 3-901509-43-7,
253
- 290.
-
Y. Kahraman, M. Madan, B. Sagbas, M.N. Durakbasa:
"Parametric Design and Modeling of 3D Printed Prosthetic Finger";
in: "Digital Conversion on the Way to Industry 4.0 - Selected Papers from ISPR2020, September 24-26, 2020, Lecture Notes in Mechanical Engineering",
ISSN 2195-4364;
M.N. Durakbasa, G. Gencyilmaz (ed.);
Springer Nature Switzerland AG,
Cham, Switzerland,
2020,
ISBN: 978-3-030-62784-3,
13 pages.
More information
-
L. Kandrac, I. Mankova, M. Vrabel, J. Beno, M.N. Durakbasa, G. Bas:
"Outline Of Cutting Edge Preparation And Model Proposal For Nanometrological Process Management";
in: "Scientific Research Reports "Development in Machining Technology"",
W. Zebala, I. Mankova (ed.);
issued by: Cracow University of Technology;
Development in Machining Technology,
Krakow, Polen,
2013,
ISBN: 978-83-7242-655-0,
62
- 81.
More information
-
L. Kandrac, I. Mankova, M. Vrabel, J. Beno, J. Stahovec, M.N. Durakbasa, G. Bas:
"Application of FEM Analysis to Predict the Effect of Cutting Conditions and Tool Geometry on Temperature and Cutting Forces During Orthogonal Cutting of Ti-6Al-4V";
in: "Scientific Research Reports "Development in Machining Technology"",
issued by: Cracow University of Technology;
Development in Machining Technology,
2014,
ISBN: 9788372427656,
52
- 74.
More information
-
B. Katalinic:
"Design and Scheduling of Next Generation of Self-organising Assembly Systems";
in: "DAAAM International Scientific Book 2002",
B. Katalinic (ed.);
DAAAM International Vienna,
Vienna,
2002,
ISBN: 3-901509-30-5,
299
- 314.
-
B. Katalinic:
"Foreword";
in: "DAAAM International Scientific Book 2003",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Vienna,
2003,
ISBN: 3-901-509-36-4,
3
- 4.
-
B. Katalinic:
"Foreword";
in: "DAAAM International Scientific Book 2005",
issued by: DAAAM Internaitonal Vienna;
DAAAM International Vienna,
Vienna,
2005, (invited),
ISBN: 3-901509-43-7,
3.
-
B. Katalinic, P. Cesarec, R. Kettler:
"Integration of Subordination and self Organisation in working Scenarios of Bionic Assembly System";
in: "Concurrent Product and Technology Development",
CEEPUS Network CII-HR-0108,
Rijeka,
2009,
ISBN: 978-953-968999-3,
305
- 320.
-
B. Katalinic, V. Kordic:
"Integration of Subordination and Self Organisation in Working Scenarios of Bionic Assembly System";
in: "DAAAM International Scientific Book 2003",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2003, (invited),
ISBN: 3-901-509-36-4,
319
- 330.
-
B. Katalinic, A. Lazinica:
"Autonomous mobile robots in assembly applications";
in: "DAAAM International Scientific Book 2005",
issued by: DAAAM Internaitonal Vienna;
DAAAM International Vienna,
Vienna,
2005, (invited),
ISBN: 3-901509-43-7,
323
- 332.
-
B. Kittl, C. Baumann:
"Web based cell control software architecture";
in: "Computer Integrated Manufacturing - Advanced Design and Management",
issued by: Department of Engineering Process Automation and Integrated Manufacturing Systems, Silesian University of Technology;
WNT,
Warschau,
2003,
ISBN: 83-204-2850-5,
265
- 272.
More information
-
V. Kordic, B. Katalinic, B. Ljoljic, K. Stuja:
"Toward Autonomous Agent Design Concept";
in: "DAAAM International Scientific Book 2002",
issued by: B. Katalinic;
DAAAM International Vienna,
Vienna,
2002,
ISBN: 3-901509-30-5,
315
- 323.
-
S. Krall, M. Reiter, F. Bleicher:
"Influence Of MHP-Technology On The Surface Near Material Structure Of Stainless Steel 1.4301";
in: "Materials Today: Proceedings",
Elsevier,
2018, (invited),
ISSN: 2214-7853.
-
S. Krall, M. Reiter, F. Bleicher:
"Influence of the machine hammer peening technology on the surface near material structure of stainless steel X5CrNi18-10";
in: "Materialstoday Proceedings",
Volume 5, Issue 13, Part 2;
Elsevier,
2017, (invited),
26603
- 26608.
-
Z Kremljak, B. Katalinic:
"Preface";
in: "Decision Making Under Risk",
B. Katalinic (ed.);
issued by: Wien;
DAAAM International Vienna,
Wien,
2004, (invited),
ISBN: 3-901509-44-5,
4.
-
M. Lamprecht, M. Leonhartsberger:
"Tool Stiffness Calculation In Roll Forming";
in: "International Journal of Simulation Modelling",
Volume 20;
issued by: DAAAM International Vienna;
DAAAM International Vienna,
2021,
ISSN: 1726-4529,
40
- 51.
-
I. Leobner, M. Obermair:
"Balanced Manufacturing für Industrie 4.0";
in: "Integrale Planung für Industriebau 4.0",
C. Achammer, I. Kovacic (ed.);
Klein Publishing GmbH,
Wien,
2015,
ISBN: 978-3-903015-03-6,
140
- 145.
-
G. Liedl:
"Laser Micromachining";
in: "Lasers in Chemistry",
M. Lackner (ed.);
Wiley-VCH,
2008,
ISBN: 978-3-527-31997-8,
923
- 941.
-
B. Ljoljic, B. Katalinic, V. Kordic, K. Stuja:
"Strategical Planning for a Manufacturing Company";
in: "DAAAM International Scientific Book 2002",
B. Katalinic (ed.);
issued by: B. Katalinic;
DAAAM International Vienna,
Vienna,
2002,
ISBN: 3-901509-30-5,
343
- 349.
-
V. Majstorovic, M.N. Durakbasa, Y. Takaya, S. Stojadinovic:
"Advanced Manufacturing Metrology in Context of Industry 4.0 Model";
in: "Proceedings of the 12th International Conference on Measurement and Quality Control - Cyber Physical Issue, IMEKO TC 14 2019 - Part of the Lecture Notes in Mechanical Engineering book series (LNME)",
1;
V. Majstorovic, M.N. Durakbasa (ed.);
Springer International Publishing AG,
2019,
ISBN: 978-3-030-18176-5,
1
- 11.
More information
-
S. Mansour Fallah:
"Multi Agent Based Control Architectures";
in: "Daaam International Scientific Book 2015",
B. Katalinic (ed.);
issued by: DAAAM;
DAAAM International Vienna,
Wien,
2015, (invited),
ISSN: 1726-9679,
1166
- 1170.
-
M. Obermair:
"Industry and Research Delegation - Booklet";
in: "Industry and Research Delegation",
Office of Science and Technology (OSTA), Austrian Embassy in Washington, DC,
2015, (invited),
15.
-
A. Özcan, A. Akdogan, M.N. Durakbasa:
"Improvements in Manufacturing Processes by Measurement and Evaluation Studies According to the Quality Management System Standard in Automotive Industry";
in: "Digital Conversion on the Way to Industry 4.0 - Selected Papers from ISPR2020, Lecture Notes in Mechanical Engineering",
ISSN 2195-4356;
Springer Nature Switzerland AG,
Cham,
2021,
ISBN: 978-3-030-62783-6,
483
- 492.
More information
-
P.H. Osanna, M.N. Durakbasa:
"Prüfmittelmanagement und Messtechnik";
in: "Taschenbuch Qualitätsmanagement",
Hanser,
München Wien,
2004,
ISBN: 3-446-22830-6,
200
- 224.
-
P.H. Osanna, M.N. Durakbasa, A. Afjehi-Sadat:
"EVALUATION OF NON-TECHNICAL STRUCTURES ON THE BASIS OF SOPHISTICATED PRODUCTION METROLOGY AND INFORMATION TECHNOLOGY";
in: "Production Process in Mechanical Engineering",
W. Zebala, J. Beno (ed.);
issued by: Cracow University of Technology - Technical University of Kosice;
Cracow University of Technology - Technical University of Kosice,
Slovakia,
2006,
ISBN: 80-8073-568-9,
153
- 160.
-
P.H. Osanna, M.N. Durakbasa, A. Afjehi-Sadat:
"Measurement of geometrical properties (chapter 14)";
in: "Measurement in Technology - Volume II",
issued by: Vienna University of Technology;
TU Wien,
2005,
ISBN: 80-89112-05-6,
404
- 422.
-
P.H. Osanna, M.N. Durakbasa, A. Afjehi-Sadat:
"Nano-Metrologie als wissenschaftliche Disziplin in der praktischen Anwendung und im Blickpunkt der europäischen internationalen Standardisierung";
in: "Messtechnik für Mikro- und Nano-Engineering",
issued by: VDI Wissensforum IWB;
VDI Verlag GmbH,
Düsseldorf,
2006,
ISBN: 3-18-091950-7,
12.
-
P.H. Osanna, M.N. Durakbasa, A. Afjehi-Sadat:
"Nanometrologie - Hochgenaue Messtechnik für Maschinenbau, Präzisionstechnik und Bioengineeing";
in: "Measuring Technology in Advanced Machine Manufacturing Systems",
issued by: Kielce University of Technology;
Wydawnictwo,
Kielce, Polen,
2004,
ISBN: 83-88906-65-8,
11
- 19.
-
P.H. Osanna, M.N. Durakbasa, A. Afjehi-Sadat:
"NANOMETROLOGIE - HOCHGENAUE MESSTECHNIK FÜR MASCHINENBAU, PRÄZISIONSTECHNIK UND BIOENGINEERING";
in: "SCIENCE REPORT Measuring Technology in Advanced Machine Manufacturing Systems",
S. Adamczak, P.H. Osanna (ed.);
Wydawnictwo,
Kielce, PL,
2004,
ISBN: 83-88906-65-8,
11
- 20.
-
P.H. Osanna, M.N. Durakbasa, A. Afjehi-Sadat et al.:
"Production Metrology for Quality Control in Biomedical Application - Opportunities, Trends and Future Developments";
in: "Measurement and Quality Control in Production (VDI-Bericht 1680)",
issued by: VDI (Verein Deutscher Ingenieure);
VDI Verlag GmbH,
Düsseldorf, Deutschland,
2004,
ISBN: 3-18-091860-8,
291
- 296.
-
P.H. Osanna, M.N. Durakbasa, J.M. Bauer, H. Tahirova, L. Kräuter:
"Intelligent flexible disassembly and recycling of used products to support sustainability and total quality management in modern manufacturing industry";
in: "Management of Natural Resources, Sustainable Development and Ecological Hazards",
C.A. Brebbia, M.E. Conti, E. Tiezzi (ed.);
issued by: Wessex Institute of Technology;
Wessex Institute of Technology,
Southampton, UK,
2007,
ISBN: 978-184564-048-4,
209
- 215.
-
P.H. Osanna, M.N. Durakbasa, J.M. Bauer, H. Tahirova, L. Kräuter:
"Management of Natural Resources, Sustainable Development and Ecological Hazards";
in: "Management of Natural Resources, Sustainable Development and Ecological Hazards",
WIT Press,
2006,
ISBN: 978-1-84564-048-4.
-
P.H. Osanna, M.N. Durakbasa, L. Kräuter:
"Accurate Workpiece Measurement Technique Develops from Precision Metrology to Nanometrology and Femtometrology";
in: "Production Process in Mechanical Engineering",
I. Mankova, W. Zebala, J. Beno (ed.);
issued by: Cracow University of Technology;
Cracow University of Technology - Technical University of Kosice,
Cracow,
2007,
ISBN: 978-83-7242-428-0,
31
- 42.
-
P.H. Osanna, M.N. Durakbasa, L. Kräuter:
"Moderne Metrologie in Qualitätsmanagementsystemen";
in: "SCIENCE REPORT PROJECT PL-0007 Modern Metrology in Quality Management Systems",
S. Adamczak, P.H. Osanna (ed.);
issued by: Kielce University of Technology;
Science Report,
Kielce,
2006,
ISBN: 978-83-88906-66-4,
11
- 27.
-
P.H. Osanna, M.N. Durakbasa, G. Slanar:
"Entwicklungsstand der Messtechnik am Beginn des 21sten Jahrhunderts";
in: "Computer-Aided Systems for Manufacture and Measurement of Machine Elements",
S. Adamczak, P.H. Osanna (ed.);
Wydawnictwo,
Kielce, PL,
2003,
ISBN: 83-88906-30-5,
11
- 22.
-
P.H. Osanna, M.N. Durakbasa, G. Slanar, L. Kräuter:
"Erhöhung der Qualität und Umwelt-Verträglichkeit von Prozessen und Anlagen in modernen Industrie-Betrieben";
in: "Science Report",
S. Adamczak, P.H. Osanna (ed.);
issued by: Kielce University of Technology;
Wydawnictwo Politechniki Swietokrzyskiej,
Kielce,
2008,
ISBN: 978-83-88906-57-2,
21
- 28.
-
P.H. Osanna, M.N. Durakbasa, M.E. Yurci, J.M. Bauer:
"Enterprise Information Systems for Business Integration in Global International Cooperations of Collaborating Small and Medium Sized Organisations";
in: "Enterprise Information Systems for Business Integration in SMEs Technological, Organizational and Social Dimensions",
M. Cruz-Cunha (ed.);
issued by: Business Science Reference;
Business Science Reference - IGI Global,
Hershey PA - USA,
2009,
ISBN: 978-1-60566-892-5,
175
- 186.
-
P.H. Osanna, J. Raja, A. Afjehi-Sadat:
"Wirtschaftlichkeitsüberlegungen beim Einsatz von Koordinatenmessgeräten";
in: "Koordinatenmesstechnik Genauigkeit - Erfahrungen - Innovationen",
issued by: VDI/VDE-Gesellschaft;
VDI Verlag GmbH,
Düsseldorf,
2001,
ISBN: 3-18-091618-4,
217
- 228.
-
P.H. Osanna, E. Sarigül, M.N. Durakbasa, A. Osanna:
"The Role of Databanks for Artificial Intelligence Based Measurement and Control in Computer Integrated Production";
in: "Applications of Artificial Intelligence in Engineering IX",
R. Adey, G. Rzevski, D. Russel (ed.);
issued by: Wessex Institute of Technology U.K.&G.;
WIT Press,
Ashurst, Southampton SO40 7AA, UK,
1994,
ISSN: 1743-3517,
8 pages.
-
F. Pauker, T. Weiler, I. Ayatollahi, B. Kittl:
"Information Architecture for reconfigurable production systems";
in: "DAAAM International Scientific Book 2013",
DAAAM International Vienna,
Wien,
2013,
ISBN: 978-3-901509-94-0,
873
- 886.
-
G. Poszvek, C. Wiedermann, E. Markl, J.M. Bauer, R. Seemann, M.N. Durakbasa, M. Lackner:
"Fused Filament Fabrication of Ceramic Components for Home Use";
in: "Digital Conversion on the Way to Industry 4.0 - Selected Papers from ISPR2020, September 24-26, 2020, Lecture Notes in Mechanical Engineering",
ISSN 2195-4364;
Springer Nature Switzerland AG,
Cham, Switzerland,
2020,
ISBN: 978-3-030-62784-3,
14 pages.
More information
-
M. Reiter, J. Brier, F. Bleicher:
"Machining of Iron-Carbon Alloys by the Use of Poly-Crystalline Diamond Cutting Inserts with Internal Cooling";
in: "Journal of Manufacturing and Materials Processing",
2(3);
MDPI,
2018, (invited),
ISSN: 2504-4494.
-
B. Sagbas, T. Boyaci, M.N. Durakbasa:
"Precision Metrology for Additive Manufacturing";
in: "Proceedings of the International Symposium for Production Research 2018",
1;
M.N. Durakbasa et al. (ed.);
issued by: Springer Nature Switzerland AG;
Springer International Publishing AG,
2019,
ISBN: 978-3-319-92266-9,
324
- 332.
More information
-
B. Sagbas, M.N. Durakbasa:
"Industrial Computed Tomography for Nondestructive Inspection of Additive Manufactured Parts";
in: "Proceedings of the International Symposium for Production Research 2019, Lecture Notes in Mechanical Engineering (LNME)",
1;
Springer Nature Switzerland AG,
Cham,
2019,
ISBN: 978-3-030-31342-5,
481
- 490.
More information
-
B. Sagbas, M.N. Durakbasa:
"Profile and Areal Surface Characterization of Additive Manufacturing Polymer and Metal Parts";
in: "Proceedings of the 12th International Conference on Measurement and Quality Control - Cyber Physical Issue, IMEKO TC 14 2019 - Part of the Lecture Notes in Mechanical Engineering book series (LNME)",
1;
issued by: Springer Nature Switzerland AG;
Springer International Publishing,
Springer Nature Switzerland AG,
2019,
ISBN: 978-3-030-18176-5,
240
- 246.
More information
-
V. Schulze, F. Bleicher, C. Courbon, M. Gerstenmeyer, L. Meier, J. Philipp, J. Rech, J. Schneider, E. Segebade, A. Steininger, K. Wegener:
"Determination of Constitutive Friction Laws appropriate for Simulation of Cutting Processes";
in: "CIRP Journal of Manufacturing Science and Technology",
Elsevier,
2021, (invited).
-
G. Sen, I. T. Medeni, K. Sen, M.N. Durakbasa, T. Medeni:
"Sensor Based Intelligent Measurement and Blockchain in Food Quality Management";
in: "Digitizing Production Systems LNME",
1;
M.N. Durakbasa, G. Gencyilmaz (ed.);
issued by: Springer Nature Switzerland;
Springer Nature Switzerland AG,
Cham,
2022,
ISBN: 978-3-030-90420-3,
323
- 334.
More information
-
ö. Sen, M.N. Durakbasa, G. Bas, G. Sen, O. Akcatepe:
"An Implementation of Cloud Based Simulation in Production";
in: "Proceedings of the International Symposium for Production Research 2019, Lecture Notes in Mechanical Engineering book series (LNME)",
1;
M.N. Durakbasa, G. Gencyilmaz (ed.);
Springer Nature Switzerland AG,
Cham, Switzerland,
2019,
ISBN: 978-3-030-31343-2,
519
- 524.
More information
-
ö. Sen, M.N. Durakbasa, M. Baysal, G. Sen, G. Bas:
"Smart Factories: A Review of Situation, and Recommendations to Accelerate the Evolution Process";
in: "Proceedings of the International Symposium for Production Research 2018",
Springer,
2018,
ISBN: 978-3-319-92267-6,
464
- 479.
More information
-
ö. Sen, M.N. Durakbasa, H. Erdol, T. Berber, G. Bas, U. Sevik:
"Implementation of Digitalization In Food Industry";
in: "DAAAM International Scientific Book 2017",
1;
B. Katalinic (ed.);
DAAAM International Vienna,
Wien,
2017, (invited),
ISBN: 978-3-902734-12-9,
91
- 104.
More information
-
M. Sokac, Z. Santosi, D. Vukelic, M. Katic, M.N. Durakbasa, I. Budak:
"Enhancement of Images from Industrial X-Ray Computed Tomography Systems by Hybrid Approach";
in: "Proceedings of the International Symposium for Production Research 2019, Lecture Notes in Mechanical Engineering book series (LNME)",
1;
M.N. Durakbasa, G. Gencyilmaz (ed.);
Springer Nature Switzerland AG,
Cham, Switzerland,
2019,
ISBN: 978-3-030-31343-2,
138
- 146.
More information
-
M. Sokac, Z. Santosi, D. Vukelic, M. Katic, M.N. Durakbasa, I. Budak:
"Geometric Tolerancing Analysis of Multi-material Components (MMCs) Obtained by Industrial X-Ray Computed Tomography";
in: "Digital Conversion on the Way to Industry 4.0 - Selected Papers from ISPR2020, Lecture Notes in Mechanical Engineering",
ISSN 2195-4356;
Springer Nature Switzerland AG,
Cham, Switzerland,
2021,
ISBN: 978-3-030-62783-6,
607
- 613.
More information
-
S. Stojadinovic, V. Majstorovic, M.N. Durakbasa:
"An Advanced CAI Model for Inspection Planning on CMM";
in: "Lecture Notes in Mechanical Engineering - Proceedings of 5th International Conference on Advanced Manufacturing Engineering and Technologies",
1;
D. Majstorovic et al. (ed.);
Springer International Publishing AG,
Cham, Switzerland,
2017,
ISBN: 978-3-319-56429-6,
57
- 65.
More information
-
M. Stopper, B. Katalinic, K. Stuja:
"The advanced concept for planning of flexible manufacturing system for motor gears";
in: "DAAAM International Scientific Book 2005",
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Vienna,
2005, (invited),
ISBN: 3-901509-43-7,
627
- 636.
-
K. Stuja, B. Katalinic, B. Ljoljic, V. Kordic:
"Scheduling of Flexible Manufacturing Systems for Rotational Parts in a Case of Limited Production Means";
in: "DAAAM International Scientific Book 2002",
issued by: B. Katalinic;
DAAAM International,
Vienna,
2002,
ISBN: 3-901509-30-5,
555
- 564.
-
K. Stuja, M. Stopper, A. Bunjaku, M. Bruqi:
"A Concept of Scheduling of Flexible Assembly System for Electrical Motors";
in: "DAAAM International Scientific Book 2003",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Vienna,
2003,
ISBN: 3-901-509-36-4,
591
- 598.
-
G. Ugur Tuncer, C. Davutoglu, M.N. Durakbasa:
"Automated Quality Assurance Applications in the Rise of IoT";
in: "Proceedings of the International Symposium for Production Research 2019, Lecture Notes in Mechanical Enghineering",
1;
Springer Nature Switzerland AG,
Cham,
2019,
ISBN: 978-3-030-31342-5,
361
- 370.
More information
-
G. Ugur Tuncer, C. Davutoglu, M.N. Durakbasa:
"Intelligent Test Automation for Improved Software Quality Assurance";
in: "Digital Conversion on the Way to Industry 4.0 - Selected Papers from ISPR2020, Lecture Notes in Mechanical Engineering",
ISSN 2195-4356;
Springer Nature Switzerland AG,
Cham,
2021,
ISBN: 978-3-030-62783-6,
614
- 624.
More information
-
S. Vanli, N. Nomak Akdogan, M.N. Durakbasa:
"Tools of Industry 4.0 on Die Casting Production Systems";
in: "Proceedings of the International Symposium for Production Research 2019, Lecture Notes in Mechanical Engineering (LNME)",
1;
Springer Nature Switzerland AG,
Cham,
2019,
ISBN: 978-3-030-31342-5,
328
- 334.
More information
-
C. Yurci, A. Akdogan, M.N. Durakbasa:
"A Case Study - Resistance Spot Welding Distortions According To Several Welding Sequences";
in: "DAAAM International Scientific Book 2017",
Vol. 16, Chapter 13;
B. Katalinic (ed.);
DAAAM International,
2017,
ISSN: 1726-9687,
155
- 172.
More information
-
C. Yurci, A. Akdogan, M.N. Durakbasa:
"Determination of Resistance Spot Welding Parameters to Guarantee Certain Strength Values Including Regression Analysis";
in: "Proceedings of the 12th International Conference on Measurement and Quality Control - Cyber Physical Issue IMEKO TC 14 2019, Lecture Notes in Mechanical Engineering",
1;
V. Majstorovic, M.N. Durakbasa (ed.);
Springer International Publishing AG,
2019,
ISBN: 978-3-030-18176-5,
62
- 73.
More information
-
C. Yurci, M.N. Durakbasa:
"A Brief General Industrial Virtual Reality Applications Overview Including a Simple Factory VR Simulation";
in: "Digital Conversion on the Way to Industry 4.0 - Selected Papers from ISPR2020, Lecture Notes in Mechanical Engineering",
2195-4356;
Springer Nature Switzerland AG,
Cham,
2021,
ISBN: 978-3-030-62783-6,
723
- 735.
More information
-
C. Yurci, M.N. Durakbasa:
"The Importance of CT in Industry 4.0 by Supplying Quality and GPS Standards for Several Production Methods Such as Additive Manufacturing";
in: "Proceedings of 5th International Conference on the Industry 4.0 Model for Advanced Manufacturing",
ISSN 2195-4356 Lecture Notes in Mechanical Engineering;
issued by: Springer;
Springer Nature Switzerland AG,
Cham, Switzerland,
2020,
ISBN: 978-3-030-46211-6,
80
- 91.
More information
-
R. Zemann:
"Präparation von Klebeflächen an Faserverbundbauteilen";
in: "Jahrbuch Oberflächentechnik 2014",
Eugen G. Leuze Verlag,
Bad Saulgau,
2014,
ISBN: 978-3-87480-285-7,
115
- 124.
-
R. Zemann, F. Bleicher, R. Zisser-Pfeifer:
"Electrochemical Micromachining with ultra short voltage pulses";
in: "The Archive of Mechanical Engineering",
PAN Polish Academy of Sciences - Committee of Machine Design,
Warschau,
2012,
ISSN: 0004-0738,
314
- 327.
-
R. Zemann, P. Reiss, P. Schörghofer, F. Bleicher:
"Some Contributions at the Technology of Electrochemical Micromachining with Ultra Short Voltage Pulses";
in: "Cutting Edge Research in New Technologies",
issued by: Constantin Volosencu;
InTech,
Janeza Trdine 9 , 5100 Rijeka, Croatia,
2012,
ISBN: 978-953-51-0463-6,
3
- 28.
Contributions to Proceedings
-
A. Akdogan, S. Vanli, M.N. Durakbasa:
"Effect Of Gating System Improvements On Production Quality In High Pressure Die Casting";
in: "Proceedings of the 31st DAAAM International Symposium",
ISSN 1726-9679;
B. Katalinic (ed.);
DAAAM International,
Vienna, Austria,
2020,
ISBN: 978-3-902734-29-7,
0459
- 0462.
More information
-
F. Akhavei, P. Kreuzer:
"A Methodology to optimize the Single-Item and small batch Production System";
in: "Adaptive and Smart Manufacturing",
3;
issued by: Friedrich Bleicher;
new academie press,
Wien,
2016, (invited),
ISBN: 978-3-7003-1976-4,
155
- 159.
-
F. Akhavei, P. Kreuzer:
"An Approach For Increasing The Reliability Of Production Planning In Singleitem Production";
in: "Proceedings International Conference on Innovative Technologies IN-TECH 2016",
issued by: Faculty of Engineering University of Rijeka;
TISK AS, s.r.o., Jaroměř, Czech Republic,
Jaroměř, Czech Republic,
2016, (invited),
ISSN: 1849-0662,
31
- 34.
-
B. Angerer, B. Katalinic, A. Omicini:
"A Semantic Escience Portal for International Scientific and Academic Cooperation";
in: "Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education"",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2009,
ISBN: 978-3-901509-70-4,
1727
- 1728.
-
I. Ayatollahi, B. Kittl, F. Pauker, M. Hackhofer:
"Prototype OPC UA Server for Remote Control of Machine Tools";
in: "IN-TECH 2013 Proceedings of International Conference on Innovative Technologies",
Faculty of Engineering University of Rijeka,
2013,
ISBN: 978-953-6326-88-4,
73
- 76.
-
F. Badjgholi, B. Kittl:
"Automated Tool Selection for Machining";
in: "Proceedings of 12th International DAAAM Symposium",
DAAAM International Vienna,
2001,
ISBN: 3-901509-19-4,
11
- 12.
More information
-
F. Bammer, J. Petelin, R. Petkovsek:
"Measurements on a Single Crystal Photo-Elastic Modulator";
in: "CLEO:2011",
OSA The Optical Society,
2011,
ISBN: 978-1-55752-910-7,
Paper ID JTuI80,
2 pages.
More information
-
F. Bammer, R. Petkovsek:
"SCPEM-based polarization modulation ellipsometry in the NIR";
in: "Optical Fabrication, Testing, and Metrology IV",
SPIE,
2011,
ISBN: 9780819487957,
81690O-1
- 81690O-6.
More information
-
F. Bammer, T. Schumi, A. Otto, D. Schuöcker:
"Laser Assisted Bending For Efficient Light-Weight-Production";
in: "MOTSP 2011",
University of Zagreb,
2011,
ISBN: 978-953-7738-10-5,
375
- 380.
More information
-
F. Bammer, T. Schumi, R. Petkovsek:
"A new material for Single Crystal Modulators: BBO";
in: "Diode-Pumped High Energy and High Power Lasers",
SPIE,
2011,
ISBN: 9780819486707,
80800H-1
- 80800H-6.
More information
-
F. Bammer, T. Schumi, D. Schuöcker:
"Some Aspects of Laser-Assisted Bending";
in: "ICTP 2011",
IBF (RWTH Aachen) & IUL (TU Dortmund),
2011,
ISBN: 978-3-514-00784-0,
348
- 351.
More information
-
C. Baumann, B. Kittl:
"Cell Control Software and Web Services";
in: "Proceedings of the 13th International DAAAM Symposium "INTELLIGENT MANUFACTURING & AUTOMATION: LEARNING FROM NATURE"",
DAAAM International Vienna,
2002,
ISBN: 3-901509-29-1,
27
- 28.
More information
-
D. Berger:
"Development of a Discrete Simulation Model for a Light Rail Vehicle Assembly Line";
in: "Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: "Power of Knowledge and Creativity"",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2011,
ISBN: 978-3-901509-83-4,
1423
- 1424.
-
D. Berger, R. Fürbacher:
"Development of Measurement Technique for Cutting Edge Defects in Fiber Reinforced Plastics";
in: "Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: "Power of Knowledge and Creativity"",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2011,
ISBN: 978-3-901509-83-4,
1421
- 1422.
-
J. Bernreiter, F. Bleicher:
"Hybrid Machining of SiC";
in: "Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions"",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2010,
ISBN: 978-3-901509-73-5.
-
R. Bielak, G. Liedl:
"FEM analysis of debonding problems during bi-metal wire joining of aluminum and steel sheets";
in: "Internetový časopis MATERIALS SCIENCE AND TECHNOLOGY",
issued by: Faculty of Materials Science and Technolgy;
Materials Science and Technology,
Trnava,
2011,
ISSN: 1335-9053,
83
- 88.
More information
-
F. Bleicher:
"Optimizing a Three-Axes Machine-Tool with Parallel Kinematic Structure";
in: "Parallel Kinematics Seminar Chemnitz: Development Methods and Application Experience of Parallel Kinematics",
Verlag Wissenschaftliche Scripten Zwickau,
Zwickau,
2002,
ISBN: 3-928921-76-2,
883
- 890.
-
F. Bleicher, J. Bernreiter:
"Mechatronic system for the hybrid machining of brittle hard materials";
in: "Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education"",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2009,
ISBN: 978-3-901509-70-4,
1831
- 1832.
More information
-
F. Bleicher, J. Bernreiter, C. Lechner:
"3D Laser Removal - Optimization for Improving Form Errors";
in: "Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions"",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2010,
ISBN: 978-3-901509-73-5,
845
- 846.
-
F. Bleicher, C. Einspieler, J. Bernreiter, B. Huber, N. Krouzecky:
"Development of a measuring system for the analysis of hydraulic models of the size of 50x16 m by the use of numerical control technology";
in: "Proceedings 25th Danubia-Adria Symposium on Advances in Experimental Mechanics",
DAS,
2008, (invited).
-
F. Bleicher, B. Huber, K. Fuchs, C. Einspieler, J. Bernreiter, N. Krouzecky et al.:
"Comparison of different measuring methods for positioning of a recording device in large models";
in: "Proceedings 26th Danubia-Adria Symposium on Advances in Experimental Mechanics",
Institut für Mechanik, Montanuniversität Leoben,
Leoben, Österreich,
2009, (invited).
-
F. Bleicher, F. Puschitz:
"Automatically operating calibration method for a three-axis parallel kinematic machine";
in: "15th DAAAM International Symposium: "Intelligent Manufacturing & Automation: Globalisation - Technology - Men - Nature",
B. Katalinic (ed.);
issued by: DAAAM International;
DAAAM International,
2004,
ISBN: 3-901509-42-9,
43
- 44.
More information
-
F. Bleicher, F. Puschitz, T. Palatin:
"High Performance Manufacturing (HPM) a System Adapting Cutting Process";
in: "DAAAM International Scientific Book 2007",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2007,
ISBN: 3-901509-60-7.
More information
-
F. Bleicher, F. Puschitz, A. Theiner:
"LASER BASED MEASURMENT SYSTEM FOR CALIBRATING MACHINE TOOLS IN 6 DOF";
in: "DAAAM International Scientific Book 2006",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2006,
ISBN: 3-901509-47-x.
More information
-
F. Bleicher, R. Zisser-Pfeifer, R. Zemann:
"Electrochemical Milling";
in: "Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2010,
ISBN: 978-3-901509-73-5,
843
- 844.
-
O. Bodur, V. Stepanek, E. Walcher, M.N. Durakbasa:
"Precision in Additive Manufacturing, Optimization and Evaluation of the Accuracy of 3D Printer based on GPS System";
in: "Proceedings of the 31st DAAAM International Symposium",
ISSN 1726-9679;
B. Katalinic (ed.);
DAAAM International,
Vienna, Austria,
2020,
ISBN: 978-3-902734-29-7,
0963
- 0972.
More information
-
I. Bogovic, B. Barisic, B. Katalinic, M. Krsulja, Z. Car:
"Digitizing System Atos - Measuring Turbo Compressor Housing";
in: "Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: "Power of Knowledge and Creativity"",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2011,
ISBN: 978-3-901509-83-4,
1367
- 1368.
-
I. Cavusoglu, M. Cakir, M.N. Durakbasa, E. Walcher:
"The Optimization Of Drilling Parameters Of Glass Fiber Reinforced Plastics Via Taguchi Method";
in: "MultiScience - XXX. microCAD International Multidisciplinary Scientific Conference",
1;
issued by: University of Miskolc;
Miskolci Egyetem,
Miskolc, UNGARN,
2016,
ISBN: 978-963-358-113-1,
Paper ID D1-3,
9 pages.
More information
-
I. Cavusoglu, G. Poszvek, M.N. Durakbasa:
""Integration of Manufacturing Processes of New Generation Materials into Industrie 4.0";
in: "INTERNATIONAL SYMPOSIUM FOR PRODUCTION RESEARCH 2017 "Transition to Industry 4."",
1;
Caglayan Kitabevi ve Egitim Cozumleri Ticaret A.S.,
Istanbul, TR,
2017,
ISBN: 978-975-436-100-1,
129
- 138.
-
I. Cavusoglu, E. Walcher:
"The Optimisation of Life Cycle of GFRP Product";
in: "PROCEEDINGS Capturing Dynamics of Production Networks: Combining Agility, Innovation and Quality",
1;
S. Popescu et al. (ed.);
issued by: Technical University Of Cluj-Napoca;
UTPRES,
Cluj-Napoca / Romania,
2016,
ISBN: 978-606-737-180-2,
238
- 244.
-
P. Demircioglu, I. Bogrekci, M.N. Durakbasa:
"Image Processing Techniques for Surface Engineering";
in: "PROCEEDINGS Capturing Dynamics of Production Networks: Combining Agility, Innovation and Quality",
1;
D. Popescu (ed.);
issued by: Technical University of Cluj-Napoca;
UTPRES,
Cluj-Napoca / Romania,
2016,
ISBN: 978-606-737-180-2,
399
- 402.
-
V. Despot, B. Barisic, B. Katalinic, M. Krsulja, Z. Car:
"Radioscopic Measurement on Fuel Filter Support: Inspection for Health of Material";
in: "Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: "Power of Knowledge and Creativity"",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2011,
ISBN: 978-3-901509-83-4,
1359
- 1360.
-
A. Dimitriou, C. Dorn, F. Bleicher:
"A Holistic Approach for Energy Efficient Production Facilities";
in: "Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: "Power of Knowledge and Creativity"",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2011,
ISBN: 978-3-901509-83-4,
1437
- 1438.
-
M.N. Durakbasa:
"Accreditation and certification in Europe and Worldwide";
in: "1st EUROPEAN QUALITY DAYS IN KOSOVA",
E. Hajrizi, P.H. Osanna (ed.);
issued by: Institute for Enterprise Management and Engineering / Vienna University of Twechnology;
Proceedings of the International IEME-Conference,
Prishtina, Kosova,
2002,
ISBN: 3-901888-20-9,
63
- 69.
-
M.N. Durakbasa:
"Artificial Intelligence Based Measurement System Supervision";
in: "Intelligent Systems",
issued by: IEEE;
IEEE,
Sofia,
2002,
ISBN: 0-7803-7601-3,
298
- 301.
-
M.N. Durakbasa:
"Qualitätsmanagement als Schwerpunkt in CIM";
in: "Proceedings 12th International Conference BIAM'94",
1;
issued by: Croatian Society for Communications, Computing, Electronics, Measurement and Control;
KoREMA,
Zagreb,
1994,
ISBN: 953-6037-03-3,
G-1
- G-5.
More information
-
M.N. Durakbasa:
"Rechnerunterstützte Prüfmittelüberwachung in der modernen Produktionstechnik";
in: "Proceedings 13th Conference BIAM '96",
1;
issued by: Croatian Society for Communications, Computing, Electronics, Measurement and Control;
KoREMA,
Zagreb,
1996,
ISBN: 953-6037-12-2,
D-26
- D-31.
-
M.N. Durakbasa, G. Bas, J.M. Bauer, L. Kräuter:
"Development Of An Advanced Metrology And Intelligent Quality Management As A Strategic Approach In Manufacturing Industry";
in: "11th IMEKO TC14 Symposium on Laser Metrology for Precision Measurement and Inspection in Industry",
issued by: Curran Associates, Inc.;
Curran Associates, Inc. e-media,
Red Hook, NY 12571,
2014,
ISBN: 978-1-63266-731-1,
223
- 226.
-
M.N. Durakbasa, G. Bas, E. Güclü, W. Pirker:
"An Innovative Technique for Succesful Clinical Dental Implementation by Means of Quality Control and Surface Characterization Analyse";
in: "The Publications of the MultiScience - XXVIII. microCAD International Multidisciplinary Scientific Conference",
issued by: University of Miskolc;
University of Miskolc,
Miskolc HU,
2014,
ISBN: 978-963-358-051-6,
Paper ID H8,
7 pages.
-
M.N. Durakbasa, P.H. Osanna:
"Development and State of the Art of Production Metrology for the 21st Century - From Micrometrology to Nanometrology and Picometrology";
in: "Modern Technologies in Manufacturing",
issued by: MTeM, Cluj-Napoca;
Proceedings of the 6th International Conference MTeM,
Cluj-Napoca,
2003, (invited),
ISBN: 973-656-490-8,
464
- 474.
-
M.N. Durakbasa, P.H. Osanna:
"Surface Measurement and Evaluation of Non Technical Structures by Co-ordinate Metrology";
in: "HMD 18th Metrology Symposium",
issued by: Croatian Metrology Society;
Symposium Digest,
Zagreb, HR,
2001,
ISBN: 953---96093-5-6,
4 pages.
-
M.N. Durakbasa, P.H. Osanna:
"The Role of Co-ordinate Metrology in the Hierarchical Structure of Metrology and the System for Measurement Instruments Confirmation";
in: "COORDINATE MEASURING TECHNIQUE",
issued by: Vth International Scientific Conference;
Tagung,
Bielsko-Biala,
2002,
55
- 62.
-
M.N. Durakbasa, P.H. Osanna, L. Kräuter:
"The Fundamental Influence of Education, Training and Certification of Persons Working in Metrology for Research and in Industry";
in: "Proceedings of the 7th International Symposium on Tools and Methods of Competitive Engineering",
I. Horvath, Z. Rusak (ed.);
issued by: Delft University of Technology;
Faculty of Industrial Design Engineering, Delft University of Technology,
Eurotech 2 d.o.o., Delft, Netherlands,
2008,
ISBN: 978-90-5155-044-3,
1409
- 1410.
-
A. Fritsche, F. Bleicher:
"Experimental investigation of the heat flux distribution in grinding of titanium alloy";
in: "25th DAAAM International Symposium on Intelligent Manufacturing & Automation",
Elsevier,
2015, (invited),
ISSN: 1877-7058,
987
- 993.
-
M. Fuchs, Ch. Habersohn, Y. Kalkan, C. Lechner, F. Bleicher:
"Metrological investigation of an actuator device for vibration assisted turning";
in: "FME Transactions - Scientific Journal",
Vol.43/2;
issued by: Faculty of Mechanical Engineering;
FME Transactions,
Belgrad,
2015, (invited),
ISSN: 1451-2092,
119
- 122.
-
B. Gastermann, F. Luftensteiner, M. Stopper, B. Katalinic:
"Multiple Stage Production Planning in Plain Manufacturing Environments";
in: "Annals of DAAAM for 2012 & Proceedings of the 23rd International DAAAM Symposium: "Make Harmony between Technology and Nature, and Your Mind will Fly Free as a Bird"",
B. Katalinic (ed.);
issued by: DAAAM Vienna International;
DAAAM International Vienna,
Wien,
2012,
ISBN: 978-3-901509-91-9,
Paper ID Volume 23, No.1 CDRom Version,
4 pages.
-
B. Gastermann, M. Stopper, B. Katalinic:
"Apects of the Production Control System Conwip in Small and Medium Sized Industrial Companies";
in: "Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: "Power of Knowledge and Creativity"",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2011,
ISBN: 978-3-901509-83-4,
0621
- 0622.
-
B. Gastermann, M. Stopper, B. Katalinic:
"Outline of an Autonomous Control Concept for Continuous Flow Production Using RFID and Agend-based Services";
in: "Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions"",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2010,
ISBN: 978-3-901509-73-5,
863
- 864.
-
I. Giouroudi, J. Kosel, D. Andrijasevic, H. Hötzendorfer, H. Pfützner, W. Brenner, F. Bleicher:
"Magnetostrictive Bilayer Sensor for Micro Torque Measurements";
in: "European Magnetic Sensors & Actuators Conference",
issued by: Book of Abstracts EMSA 2006;
Book of Abstracts EMSA 2006,
Bilbao, University of Basque Country,
2006,
153
- 161.
-
Ch. Habersohn, F. Puschitz, F. Bleicher:
"Controller concept for a highly parallel machine tool";
in: "28th Danubia-Adria-Symposium",
L. Borbas (ed.);
issued by: Scientific Society for Mechanical Engineering;
Scientific Society for Mechanical Engineering,
Siofok,
2011, (invited),
ISBN: 978-963-9058-32-3,
227
- 228.
-
M. Hodak, B. Barisic, B. Katalinic, M. Krsulja, Z. Car:
"Flatness of mechanical Interface of housing filter: Comparing Methods";
in: "Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: "Power of Knowledge and Creativity"",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2011,
ISBN: 978-3-901509-83-4,
1381
- 1382.
-
A. Hornikova, M.N. Durakbasa, F. Bleicher:
"Re-Calibration Evaluation Utilizing Data Mining Methods";
in: "ISMQC",
Osaka University,
Osaka,
2010,
##.
-
W. Jakubiec, P.H. Osanna, M.N. Durakbasa, W. Plowucha:
"Educational Objectives of Europeean Course of Coordinate Metrology for Employees of the Machine Industry";
in: "Metrology in Production Engineering",
issued by: Politechnika Lubelska;
XI Krajowa, II Miedzynarodowa Konferencja Naukowo-Techniczna "METROLOGY IN PRODUCTION ENGINEERING",
Lublin,
2005,
ISBN: 83-89246-19-8,
101.
-
M. Jurjevic, B. Barisic, B. Katalinic, M. Krsulja, Z. Car:
"Suitable Devices for Measuring Roughness on Oil Filter Housing";
in: "Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: "Power of Knowledge and Creativity"",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2011,
ISBN: 978-3-901509-83-4,
1351
- 1352.
-
M. Jurjevic, M. Krsulja, B. Katalinic, Z. Car, L. Sikulec:
"Automatic Measurement of Rotational Speed and Lathe Maintenance";
in: "Annals of DAAAM for 2012 & Proceedings of the 23rd International DAAAM Symposium: "Make Harmony between Technology and Nature, and Your Mind will Fly Free as a Bird"",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2012,
ISBN: 978-3-901509-91-9,
Paper ID Volume 23, No.1 CDRom Version,
4 pages.
-
B. Katalinic:
"DAAAM International Network: Background, History, Aims, Structure, Activities & Future";
in: "Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education"",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2009,
ISBN: 978-3-901509-70-4,
14
- 48.
-
B. Katalinic:
"Engineers for knowledge based Society";
in: "Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions"",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2010,
ISBN: 978-3-901509-73-5,
1
- 2.
-
B. Katalinic:
"Preface";
in: "Proceedings of the 4th DAAAM International Conference on Advanced Technologies for Developing Countries",
issued by: Josip Juraj Sotrssmayer University of Osijek;
DAAAM International Vienna,
Slavonski Brod,
2005, (invited),
ISBN: 953-6048-29-9,
1.
-
B. Katalinic:
"The 20th DAAAM World Symposium";
in: "Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education"",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2009,
ISBN: 978-3-901509-70-4,
3
- 4.
-
B. Katalinic:
"The 21st DAAAM World Symposium";
in: "Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions"",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2010,
ISBN: 978-3-901509-73-5,
3
- 4.
-
B. Katalinic:
"Welcome to 22nd DAAAM World Symposium";
in: "Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: "Power of Knowledge and Creativity"",
B. Katalinic (ed.);
DAAAM International Vienna,
Wien,
2011, (invited),
ISBN: 978-3-901509-83-4,
3
- 4.
-
B. Katalinic, B. Angerer:
""Automation transition concerning the virtual organization"";
in: "Annals of DAAAM for 2004 & Proceedings of 15th International DAAAM Symposium",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2004, (invited),
ISBN: 3-901509-42-9,
013
- 014.
-
B. Katalinic, P. Cesarec, M. Stopper, R. Kettler:
"Self-Organizing Systems in Nature and Technology";
in: "Proceedings of the 7th International Conferencf DAAAM Baltic Indsutrial Engineering",
R Kyttner (ed.);
issued by: DAAAM International Vienna & BALTECH Consortium;
DAAAM International Vienna,
Wien,
2010, (invited),
346
- 351.
-
B. Katalinic, A. Jadlovska, K. Hrubina, E. Wessely:
"Optimal control of complex processes";
in: "Annals of DAAAM for 2004 & Proceedings of 15th International DAAAM Symposium",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2004, (invited),
ISBN: 3-901509-42-9,
177
- 178.
-
B. Katalinic, A. Javorova:
"Flexible assembly workstation";
in: "Annals of DAAAM for 2004 & Proceedings of 15th International DAAAM Symposium",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2004, (invited),
ISBN: 3-901509-42-9,
191
- 192.
-
B. Katalinic, V. Kordic:
"Reconfigurable Assembly Systems Based on Reactive Autonomous Robots";
in: "Proceedings of the 3rd International Conference UPS 2004 Business Systems Management",
V. Majstorovic, B. Katalinic, D. Covic, V. Visekruna (ed.);
issued by: Mostar;
DAAAM International Vienna & Universtiy of Mostar,
Vienna - Mostar,
2004, (invited),
ISBN: 3-901509-24-0,
99
- 104.
-
B. Katalinic, V. Kordic:
"Self-Organizing Assembly System";
in: "Proceedings of the 3rd DAAAM International Conference on Advanced Technologies for Developing Countries",
B. Katalinic, I. VEza, B. Bilic (ed.);
issued by: Split;
DAAAM International Vienna & University of Split,
Vienna - Split,
2004, (invited),
ISBN: 953-6114-68-2,
137
- 145.
-
B. Katalinic, N. Majdandzic:
"Preface";
in: "Proceedings of the 1st DAAAM International Conference: Advanced Technologies for the Developing Countries - ATDC 02",
B. Katalinic, M. Kljajin (ed.);
DAAAM International Vienna & Strossmayer University of Osijek - Faculty of Mechanical Engineering, Slavonski Brod,
2002, (invited),
ISBN: 3-901509-32-1,
3.
-
B. Katalinic, J. Papstel:
"Preface";
in: "Proceedings of the 3rd International Conference of DAAAM National Estonia "Industrial Engineering - New Challenges to SME",
J. Papstel, B. Katalinic (ed.);
DAAAM National Estonia & Tallinn Technical University,
2002,
ISBN: 9985-59-272-7,
4.
-
B. Katalinic, P. Post, A. Eliseev, K. Ueda, S. Takakuwa:
"Contents";
in: "Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education"",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2009,
ISBN: 978-3-901509-70-4,
49
- 77.
-
B. Katalinic, D. Tufekcic:
"Preface";
in: "Proceedings of the 2nd DAAAM International Conference on Advanced Technologies for Developing Countries",
B. Katalinic, D. Tufekcic, R. Selo (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna & University of Tuzla,
Vienna - Tuzla,
2003,
ISBN: 3-901-509-35-6,
3
- 4.
-
A. Kedir Biadgligne, K. Matyas, K. Pfadenhauer:
"INTEGRATED MRP HEURISTICS FOR DETERMINING RAW MATERIAL PURCHASING LOT IN MANUFACTURING ENTERPRISES";
in: "Annals of DAAM for 2004 & Proceedings",
B. Katalinic (ed.);
issued by: DAAM International Vienna;
Danube Adria Association for Automation and Manufacturing,
Wien,
2004,
ISBN: 3-901509-42-9,
205
- 206.
-
R. Kettler, P. Cesarec, B. Katalinic:
"Cleaning of Metal Wires by using Rotating Thermal Plasma";
in: "Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education"",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2009,
ISBN: 978-3-901509-70-4,
0025
- 0026.
-
B. Kittl, C. Baumann:
"Job Shop Communication Based on Simple Object Access Protocol (SOAP)";
in: "Proceedings of 6th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" TMT 2000",
Faculty of Mechanical Engineering Zenica,
2002,
ISBN: 9958-617-11-0,
635
- 638.
More information
-
B. Kittl, C. Baumann:
"XML Based Manufacturing Data Exchange";
in: "Proceedings oft 12th International DAAAM Symposium",
DAAAM International Vienna,
2001,
ISBN: 3-901509-19-4,
225
- 226.
More information
-
B. Kittl, T. Weiler, K. Pfadenhauer:
"Plant Connectivity: Integration of Machine Tool Control with Manufacturing Operations Management";
in: "Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium",
B. Katalinic (ed.);
issued by: DAAAM International Vienna; DAAAM International Vienna;
DAAAM International,
Wien,
2010,
ISBN: 978-3-901509-73-5,
405
- 406.
-
T. Komenda, X. Feng, B. Katalinic:
"Optimum Drive-Train Design of an Industrial Robot Family";
in: "Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education"",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2009,
ISBN: 978-3-901509-70-4,
1435
- 1436.
-
P. Kopacek, T. Magyar, L. Silberbauer:
"Humi - A mobile robot for Landmine Detection";
in: "10th IFAC Symposium on Robot Control",
issued by: IFAC;
Elsevier Science Publishers B.V.,
2012,
828
- 833.
More information
-
M. Kralik, M. Bachraty, M. Pokusova, M.N. Durakbasa:
"Measuring of Friction Factor of Cutting Environment";
in: "Proceedings of the 28th DAAAM International Symposium,",
B. Katalinic (ed.);
DAAAM International,
2017,
ISSN: 1726-9679,
118
- 123.
More information
-
S. Krall, R. Zemann:
"Investigation of the dynamic behavior of cfrp leaf springs";
in: "25th DAAAM International Symposium on Intelligent Manufacturing & Automation",
Elsevier,
2015, (invited),
ISSN: 1877-7058,
646
- 655.
-
I. Kukushkin, B. Katalinic, P. Cesarec, R. Kettler:
"Reconfiguration in Self-Organizing Systems";
in: "Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: "Power of Knowledge and Creativity"",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2011,
ISBN: 978-3-901509-83-4,
0641
- 0642.
-
I. Kukushkin, B. Katalinic, P. Cesarec, D. Zdyb, R. Kettler:
"Modeling of Mobile Robot Behavior for Line-Less Bionic Assembly System";
in: "Annals of DAAAM for 2012 & Proceedings of the 23rd International DAAAM Symposium: "Make Harmony between Technology and Nature, and Your Mind will Fly Free as a Bird"",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2012,
ISBN: 978-3-901509-91-9,
Paper ID Volume 23, No.1 CDRom Version,
6 pages.
-
D. Kumar, K. Kroechert Ching, G. Kalss, G. Liedl:
"Femtosecond laser structuring of nodular cast iron for anticorrosion and thermally stable superhydrophobic surface";
in: "Lasers in Manufacturing Conference",
issued by: WLT;
WLT - Wissenschaftliche Gesellschaft Lasertechnik e.V.,
2021,
6 pages.
More information
-
M. Lackner, M. Schwarzott, G. Liedl et al.:
"Heat transfer to a single plastic resin particle - Experimental investigations by flames and laer pulses";
in: "3rd European Combustion Meeting ECM 2007",
issued by: MediterraneanAgronomic Institute of Chania, Greece;
European Combustion Meeting 2007,
Chania, Greece,
2007,
Paper ID 16-12,
6 pages.
More information
-
B. Lauwers, F. Bleicher, P. Ten Haaf, M. Vanparys, J. Bernreiter, T. Jacobs, J. Loenders:
"Investigation of the Process-Material Interaction in Ultrasonic Assisted Grinding of ZrO2 based Ceramic Materials";
in: "4th CIRP International Conference on High Performance Cutting 2010",
issued by: Pisa;
CIRP,
2010,
50
- 51.
More information
-
J. Lewandowski, B. Kittl:
"IT Applications for Manufacturing Operations and Control";
in: "Annals of DAAAM for 2008 & Proceedings of the 19th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Next Generation of Intelligent Systems and Solutions"",
B. Katalinic (ed.);
DAAAM International Vienna,
2008,
ISBN: 978-3-901509-68-1,
751
- 752.
-
F. Lienert, M. Gerstenmayer, S. Krall, C. Lechner, D. Trauth, F. Bleicher, V. Schulze:
"Experimental Study on Comparing Intensities of Burnishing and Machine Hammer Peening Processes";
in: "Procedia CIRP",
3rd CIRP Conference on Surface Integrity,
2016, (invited),
ISSN: 2212-8271,
371
- 374.
-
V. Majstorovic, B. Katalinic:
"Foreward";
in: "Proceedings of the 3rd International Conference UPS 2004 Business Systems Management",
V. Majstorovic, B. Katalinic, V. Visekruna, D. Covic (ed.);
issued by: Mostar;
DAAAM International Vienna & Universtiy of Mostar,
Vienna - Mostar,
2004, (invited),
ISBN: 3-901509-24-0,
3.
-
H.-C. Möhring, P. Kersting, J.A. Yagüe-Fabra, F. Bleicher:
"A testpart for interdisciplinary analyses in micro production engineering";
in: "3rd CIRP Global Web Conference on Production Engineering Research",
Procedia CIRP,
2015,
ISSN: 2212-8271,
106
- 112.
-
S. Murzin, N. Kazanskiy, G. Liedl, G. Humenberger:
"Testing of diffractive optical element as part of specific CO2 laser equipment for metallic materials modification";
in: "Journal of Physics: Conference Series",
1368;
issued by: IOPScience;
IOP Publishing,
2019.
More information
-
S. Murzin, N. Kazanskiy, C. Stiglbrunner:
"Development of technologies of laser material processing with use of diffractive optics";
in: "2021 International Conference on Information Technology and Nanotechnology (ITNT)",
issued by: IEEE;
IEEE,
2021,
6 pages.
More information
-
S. Murzin, G. Liedl, R. Bielak:
"Redistribution of the laser beam power using diffractive optical elements";
in: "Proceedings of SPIE - Optical Technologies for Telecommunications, vol. 10342",
103420G;
V. Andreev, A. Bourdine, V. Burdin, O. Morozov, A. Sultanov (ed.);
issued by: SPIE;
SPIE,
Pellingham, Washington, USA,
2017,
ISBN: 9781510611337,
45
- 52.
More information
-
S. Murzin, G. Liedl, R. Bielak, A. Melnikov:
"Conditions improving of laser heating for forming of materials with a ferritic-martensitic structure";
in: "Journal of Physics: Conference Series",
1368;
issued by: IOPScience;
IOP Publishing,
2019.
More information
-
S. Murzin, G. Liedl, R. Pospichal:
"Colorization of copper surfaces by nanostructure modifications with ultrashort laser pulses";
in: "Journal of Physics: Conference Series",
1368;
issued by: IOPScience;
IOP Publishing,
2019.
More information
-
T. Nichol, F. Puschitz, F. Bleicher:
"Piezoelectic Controlled Sub-Micrometer Machining Station";
in: "Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education"",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2009,
ISBN: 978-3-901509-70-4,
1769
- 1770.
More information
-
H. Orsolits, D. Sirkett, B. Katalinic:
"New Magnetic Gearbox Concept: Prototype Design and Construction";
in: "Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education"",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2009,
ISBN: 978-3-901509-70-4,
0457
- 0458.
-
P.H. Osanna:
"Environmental Management Systems as Important Factor in European Developments";
in: "1st EUROPEAN QUALITY DAYS IN KOSOVA",
E. Hajrizi, P.H. Osanna (ed.);
issued by: Institute for Enterprise Management and Engineering (IEME) / Vienna University of Technology;
Proceedings of the International IEME-Conference,
2002,
ISBN: 3-901888-20-9,
97
- 100.
-
P.H. Osanna:
"The "Quality Road" to Build-Up Social, Economic and Scientific Bridges within Europe";
in: "1st EUROPEAN QUALITY DAYS IN KOSOVA",
E. Hajrizi, P.H. Osanna (ed.);
issued by: Institute for Enterprise Management and Engineering (IEME) / Vienna University of Technology;
Proceedings of the International IEME-Conference,
Prishtina, Kososva,
2002,
ISBN: 3-901888-20-9,
18
- 21.
-
P.H. Osanna, M.N. Durakbasa:
"Evaluation and Virtual Realisation of Non-technical Structures using by Co-ordinate Metrology";
in: "COORDINATE MEASURING TECHNIQUE",
issued by: VIth International Scientific Conference;
Tagungsband,
Bielsko-Biala,
2004,
203
- 212.
-
P.H. Osanna, M.N. Durakbasa:
"Fertigungsmesstechnik aus Sicht der ISO Normen";
in: "Messtechnik für die Qualitätskontrolle",
issued by: Tschechisch-Metrologische Gesellschaft;
Tagungsband,
Plzen,
2003,
158
- 168.
-
P.H. Osanna, M.N. Durakbasa, A. Afjehi-Sadat:
"Measurement Evaluation of Non-Technical Structures Based on Sophisticated Metrology and Modern Information Technology";
in: "Metrology and Properties of Enginieering Surfaces",
issued by: Ecole Nationale d'Ingénieurs de Saint-Etienne;
Publications de I'Universite de Saint-Etienne,
Saint-Etienne, France,
2005,
ISBN: 2-86272-389-4,
183
- 190.
-
P.H. Osanna, M.N. Durakbasa, A. Afjehi-Sadat:
"Metrology in Micro- and Nanotechnology";
in: "Proceedings Kongres Metrologii, KM 2004 ",
issued by: Politechnika Wroclawska, Wroclaw, PL;
Politechnika Wroclawska,
Wroclaw, PL,
2004,
ISBN: 83-921260-0-9,
9 pages.
-
P.H. Osanna, M.N. Durakbasa, A. Afjehi-Sadat:
"Structure Measurement of Workpiece Surfaces at High Precision Machining";
in: "2nd International Congres of Precision Machining",
issued by: Department of Manufacturing Technology;
CVUT,
Prag,
2003,
ISBN: 80-01-02795-3,
50
- 59.
-
P.H. Osanna, M.N. Durakbasa, A. Afjehi-Sadat:
"The Application of Sophisticated Production Metrology and Nanometrology to Achieve Efficient Quality Control in Bio-Engineering and Bio-Medicine";
in: "Intelligent Processing and Manufacturing of Materials",
issued by: J.A. Meech (Canada), J.F. Maguire (USA), Y. Kawazoe (JApan);
IPMM 2005,
Monterey, USA,
2005,
6 pages.
-
P.H. Osanna, M.N. Durakbasa, G. Kahsay, A. Afjehi-Sadat:
"Quality Management Practices and Challenges of Manufacturing Industries of Least Developing Countries";
in: "ICPM 2005 Proceedings",
issued by: TU Wien;
Abteilung für Austauschbau und Messtechnik, TU Wien,
Wien,
2005,
ISBN: 3-901-888-31-4,
251
- 256.
-
P.H. Osanna, M.N. Durakbasa, N. Nomak Akdogan, H. Tahirova:
"Artificial Intelligence Based Supervision and Confirmation of Complex Measurement Systems and Interaction to the Hierarchical Metrological Structure";
in: "Metrology in Production Engineering",
issued by: Politechnika Lubelska;
XI Krajowa, II Miedzynarodowa Konferencja Naukowo-Techniczna "METROLOGY IN PRODUCTION ENGINEERING",
Lublin,
2005,
ISBN: 83-89246-19-8,
25
- 30.
-
P.H. Osanna, M.N. Durakbasa, H. Tahirova:
"INTELLIGENT FLEXIBLE DISASSEMBLY AND RECYCLING OF USED PRODUCTS TO SUPPORT TOTAL QUALITY MANAGEMENT AND SUSTAIABILITY IN EUROPEAN INDUSTRY";
in: "Proceedings of Third International Working Conference",
International Working Conference Total Quality Management - Advanced and Intelligent Approaches,
Belgrade,
2005,
ISBN: 86-7083-514-2,
1
- 4.
-
P.H. Osanna, M.N. Durakbasa, H. Tahirova, A. Afjehi-Sadat:
"Implementation of Life-Cycle Assessment (LCA) for better waste management in countries of Europe, Caucasus and central Asia";
in: "ICPM 2005 Proceedings",
issued by: Wien;
Abteilung für Austauschbau und Messtechnik, TU Wien,
2005,
ISBN: 3-901-888-31-4,
257
- 264.
-
P.H. Osanna, M.N. Durakbasa, K. Yaghmaei, L. Kräuter:
"Quality Control And Nanometrology For Micro/nano Surface Modification Of Orthopaedic/dental Implants";
in: "MEASUREMENT 2009",
M. Tysler et al. (ed.);
issued by: Institute of Measurement Science, SAS;
Komprint s.r.o.,
Bratislava,
2009,
ISBN: 978-80-969672-1-6,
167
- 172.
-
P.H. Osanna, R. Oberländer, M.N. Durakbasa:
"Entwicklungstendenzen bei CAQ/CAT";
in: "Automatisierungstechnik im Wandel",
issued by: TU Wien;
TU Wien,
Wien,
1992,
1
- 10.
-
P.H. Osanna, E. Sarigül, M.N. Durakbasa, A. Osanna:
"The Role of Databanks for Artificial Intelligence Based Measurement and Control in Computer Integrated Production";
in: "G Rzevski; R A Adey; D W Russell",
G. Rzevski, R. Adey, D. Russel (ed.);
issued by: Southampton ; Boston : Computational Mechanics Publications;
Southampton ; Boston : Computational Mechanics Publications,
Southampton,
1994,
ISBN: 1-85312-284-x,
471
- 478.
-
J. Papstel, B. Katalinic:
"Preface";
in: "Proceedings of the 4th International Conference Industrial Engineering - New Challenges to SME",
B. Katalinic, J. Papstel (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna & DAAAM National Estonia,
Vienna-Tallinn,
2004, (invited),
ISBN: 9985-894-59-6,
4.
-
F. Pauker, I. Ayatollahi, B. Kittl:
"Service orchestration for flexible manufacturing systems using sequential functional charts and OPC UA";
in: "International Conference on Innovative Technologies In-Tech 2015",
issued by: Faculty of Engineering, University of Rijeka;
Faculty of Engineering, University of Rijeka,
Rijeka, Kroatien,
2015, (invited),
ISSN: 1849-0662,
138
- 141.
-
P. Peterko, Ch. Habersohn, C. Lechner, H. Kaminski, M. Jech, F. Bleicher:
"Untersuchung des Einflusses des Schlagverdichtens auf die tribologischen Eigenschaften von Metalloberflächen";
in: "Proceedings of the ÖTG Symposium 2011",
F. Franek (ed.);
issued by: Österreichische Tribologie Gesellschaft;
Österreichische Tribologie Gesellschaft,
Wiener Neustadt,
2011, (invited),
ISBN: 978-3-901657-40-5,
49
- 56.
-
K. Pfadenhauer, B. Kittl:
"Reactive Scheduling for Batch Processors";
in: "Annals of DAAAM for 2003 & Proceedings of the 14th International DAAAM Symposium",
B. Katalinic (ed.);
DAAAM International Vienna,
Vienna,
2003,
ISBN: 3-901509-34-8,
357
- 358.
More information
-
K. Pfadenhauer, B. Kittl:
"Why modeling tools and methodologies for a service oriented shop floor architecture are needed";
in: "7th International Conference on Computer Integrated Manufacturing",
Scientific Fascicles of the Department of Engineering Process Automation and Integrated Manufacturing Systems, Silesian University of Technology,
Gliwice,
2005,
ISBN: 83-915011-3-2,
183
- 187.
More information
-
K. Pfadenhauer, B. Kittl:
"With a system approach towards a model driven service architecture for the shop floor";
in: "Proceedings of the 2004 International Research Conference on Innovations in Information Technology (IIT2004)",
College of Information Technology, UAE University,
Dubai,
2004,
8 pages.
More information
-
F. Puschitz, F. Bleicher, T. Mikats, T. Nichol:
"NC-Controller Strategy For The Novel Machine Tool "X-Cut"";
in: "Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education"",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2009,
ISBN: 978-3-901509-70-4,
1691
- 1692.
More information
-
M. Radosevic, B. Katalinic, P. Cesarec, S. Stimac, B. Barisic:
"Making Device for Torque Initiation which is applied in Torque Wrench Calibration";
in: "Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions"",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2010,
ISBN: 978-3-901509-73-5,
1521
- 1522.
-
M. Rahmani, F. Bleicher:
"Experimental investigation of over determination in machine tools linear guides";
in: "32nd Danubia-Adria Symposium on Advances in Experimental Mechanics",
32nd Danubia-Adria Symposium on Advances in Experimental Mechanics,
Faculty of Mechanical Engineering, University of Zilna, Slovakia,
2015, (invited),
ISBN: 978-80-554-1094-4,
112
- 113.
-
M. Rahmani, S. Krall, F. Bleicher:
"Experimental investigations on stick-slip phenomenon and friction characteristics of linear guides";
in: "25th DAAAM International Symposium on Intelligent Manufacturing & Automation",
Elsevier,
2015, (invited),
ISSN: 1877-7058,
1023
- 1031.
-
B. Sagbas, M.N. Durakbasa:
"Polimer Esasli Kalça Protezlerinin Yüzeylerinde Sürtünmeye Baglı Olusan Sıcaklık Artışının Belirlenmesi - DETERMINING FRICTIONAL TEMPERATURE RISE ON POLYMER BASED HIP PROSTHESIS SURFACES";
in: "1. Ulusal Plastik Teknolojilerİ Sempozyumu - Upts 2015",
1;
issued by: Yildiz Technical University;
YTÜ,
ISTANBUL,
2015,
189
- 198.
More information
-
A. Siller, A. Steininger, F. Bleicher:
"Heat dissipation in turning operations by means of internal cooling";
in: "25th DAAAM International Symposium on Intelligent Manufacturing & Automation",
Elsevier,
2015, (invited),
ISSN: 1877-7058,
1116
- 1123.
-
A. Steininger, A. Siller, F. Bleicher:
"Investigations regarding process stability aspects in thread tapping Al-Si alloys";
in: "25th DAAAM International Symposium on Intelligent Manufacturing & Automation",
Elsevier,
2015, (invited),
ISSN: 1877-7058,
1124
- 1132.
-
S. Stimac, B. Katalinic, P. Cesarec, M. Radosevic, B. Barisic:
"Measurement of the Closing Force on the Medical Bottles";
in: "Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions"",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2010,
ISBN: 978-3-901509-73-5,
1523
- 1524.
-
Z. Tekic, I Cosic, B. Katalinic:
"Framing Knowledge in Business Context";
in: "Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions"",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2010,
ISBN: 978-3-901509-73-5,
555
- 556.
-
Z. Tekic, I Cosic, B. Katalinic:
"Innovation and Knowledge Creation Mechanisms";
in: "Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: "Power of Knowledge and Creativity"",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2011,
ISBN: 978-3-901509-83-4,
0419
- 0420.
-
Z. Tekic, I Cosic, B. Katalinic:
"The Missing Link - Knowledge Creation and Innovation";
in: "Annals of DAAAM for 2012 & Proceedings of the 23rd International DAAAM Symposium: "Make Harmony between Technology and Nature, and Your Mind will Fly Free as a Bird"",
B. Katalinic (ed.);
issued by: DAAAM Vienna International;
DAAAM International Vienna,
Wien,
2012,
ISBN: 978-3-901509-91-9,
Paper ID Volume 23, No.1 CDRom Version,
4 pages.
-
Z. Tekic, B. Katalinic, I Cosic:
"Key Characteristics of Knowledge";
in: "Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education"",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2009,
ISBN: 978-3-901509-70-4,
1747
- 1748.
-
T. Trautner, F. Pauker, B. Kittl:
"Advanced MTConnect Asset Management (AMAM)";
in: "International Conference on Innovative Technologies IN-TECH 2016",
issued by: Faculty of Engineering University of Rijeka;
TISK AS, s.r.o., Jaroměř, Czech Republic,
Jaroměř, Czech Republic,
2016, (invited),
ISSN: 1849-0662,
59
- 62.
-
S. Vanli, A. Akdogan, M.N. Durakbasa:
"Integrated Die Casting Manufacturing System For Sustainable High Quality Of Magnesium Alloy Products";
in: "PROCEEDINGS Capturing Dynamics of Production Networks: Combining Agility, Innovation and Quality",
1;
D. Popescu et al. (ed.);
issued by: Technical University Of Cluj-Napoca;
Technical University Of Cluj-Napoca,
Cluj-Napoca, Romania,
2016,
ISBN: 978-606-737-180-2,
43
- 46.
-
I. VEza, B. Katalinic:
"Preface";
in: "Proceedings of the 3rd DAAAM International Conference on Advanced Technologies for Developing Countries",
B. Katalinic, I. VEza, B. Bilic (ed.);
issued by: Split;
DAAAM International Vienna & University of Split,
Vienna - Split,
2004, (invited),
ISBN: 953-6114-68-2,
3.
-
E. Wessely, B. Katalinic:
"Preface";
in: "Proceedings of the 3rd Workshop 'Intelligent Manufacturing Systems'",
B. Katalinic, E. Wessely (ed.);
issued by: DAAAM Slovakia;
DAAAM International Vienna,
Vienna,
2001,
ISBN: 3-901509-31-3,
5.
-
R. Zemann, F. Bleicher, F. Puschitz, R. Zisser-Pfeifer, Ch. Habersohn:
"Electrochemical Micromachining of Tungsten";
in: "Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: "Power of Knowledge and Creativity"",
B. Katalinic (ed.);
issued by: DAAAM International Vienna;
DAAAM International Vienna,
Wien,
2011,
ISBN: 978-3-901509-83-4,
0927
- 0928.
-
R. Zemann, F. Bleicher, R. Zisser-Pfeifer:
"Some practical contributions of the technology of electrochemical micromaching with ultra short pulses";
in: "Insect 2011",
Mollay, Lohrengel (ed.);
issued by: Centre of Electrochemical Surface Technology;
CEST,
Wiener Neustadt,
2011, (invited),
ISBN: 978-3-00-036247-7,
62
- 67.
-
R. Zemann, J. Sacherl, W. Hake, F. Bleicher:
"New measurement processes to define the quality of machined fibre reinforced polymers";
in: "25th DAAAM International Symposium on Intelligent Manufacturing & Automation",
Elsevier,
2015, (invited),
ISSN: 1877-7058,
636
- 645.
Talks and Poster Presentations (with Proceedings-Entry)
-
B. Adjassoho, E. Kozeschnik, C. Lechner, F. Bleicher, S. Gössinger, C. Bauer:
"Induction of residual stresses and increase of surface hardness by Machine Hammer Peening technology";
Talk: 23rd International DAAAM Symposium,
Zadar, Kroazien;
2012-10-24
- 2012-10-27; in: "Annals of DAAAM for 2012&Proceeding of the 23rd International DAAAM Symposium",
B. Katalinic (ed.);
Annals of DAAAM for 2012 & Proceeding of the 23rd International DAAAM Symposium/DAAAM International Vienna,
23/1
(2012),
ISSN: 2304-1382;
697
- 702.
More information
-
A. Afjehi-Sadat:
"Machine Design and Metrology in Nanotechnology and Need for Standardization";
Talk: International Scientific Conference, DMC 2007,
Kosice, Slowakei (invited);
2007-10-15
- 2007-10-16; in: "Development of Metal Cutting DMC 2007",
(2007),
ISBN: 978-80-8073-858-7;
277
- 280.
-
A. Afjehi-Sadat:
"Nanotechnologies and Nanometrology for Precision Production";
Talk: 12th International Conference on Tools - ICT2007,
Miskolc, Ungarn (invited);
2007-09-06
- 2007-09-08; in: "Proceedings of the 12th International Conference on Tools",
H. University of Miskolc (ed.);
(2007),
ISSN: 1215-0851;
353
- 360.
-
A. Afjehi-Sadat:
"Nanotechnologiy and Nanometrology Outlook with Consideration of Standardization";
Talk: 8th International Conference - Modern Technologies in Manufacturing - MTeM2007,
Cluj-Napoca (invited);
2007-10-04
- 2007-10-05; in: "Proceedings of the 8th International Conference - Modern Technologies in Manufacturing",
(2007),
ISBN: 973-9087-83-3;
7
- 10.
-
A. Afjehi-Sadat:
"Nanotechnology and Nanometrology in Modern Production";
Keynote Lecture: IV. International Congress on Precision Machining - ICPM 2007,
Sandomierz - Kielce, Polen (invited);
2007-09-25
- 2007-09-28; in: "International Congress on Precision Machining - ICPM 2007 Proceedings",
(2007),
ISBN: 978-83-88906-91-6;
35
- 39.
-
A. Afjehi-Sadat, P.H. Osanna et al.:
"Investigation of 3D Topography of Surface Measurement after Hard Turning and Grinding";
Talk: International Scientific Conference MicroCAD 2006,
Miskolc, Ungarn (invited);
2006-03-16
- 2006-03-17; in: "MicroCAD 2006",
(2006),
ISBN: 9636617007;
211
- 217.
-
F. Akhavei, F. Bleicher:
"Predictive Modeling to Increase the Reliability of Production Planning in Single-item Production";
Talk: World Congress on Engineering and Computer Science 2016 (WCECS 2016),
San Francisco, UC Berkeley (invited);
2016-10-19
- 2016-10-21; in: "Proceedings of the World Congress on Engineering and Computer Science 2016 Vol II WCECS 2016, October 19-21, 2016",
IAENG,
(2016),
ISBN: 978-988-14048-2-4;
806
- 811.
-
F. Akhavei, F. Bleicher, A. Khallaghi:
"An Approach for Optimizing the Preparation and Production Planning Process in Single Item Production";
Talk: The 6th International Conference on Changeable, Agile, Reconfigurable and Virtual Production,
Bath England (invited);
2016-09-04
- 2016-09-06; in: "Procedia CIRP 52 (2016)",
ELSEVIER,
(2016),
ISSN: 2212-8271;
96
- 101.
-
F. Akhavei, A. Khallaghi, F. Bleicher:
"Development of a knowledge-based predictive model to estimate the welding process time in single part production systems";
Talk: 5th CIRP Global Web Conference Research and Innovation for Future Production,
Patras 26500 - Greece (invited);
2016-10-04
- 2016-10-06; in: "Procedia CIRP 55 (2016)",
(2016),
ISSN: 2212-8271;
212
- 217.
-
F. Akhavei, G. Pöchgraber:
"Optimierung Der Auftragsplanung In Der Einzel- Und Kleinserienfertigung Mittels Digitaler Produktund Interativen Prozessentwicklung";
Talk: 20. IFF-Wissenschaftstage,
Fraunhofer-Institut; Deutschland (invited);
2017-06-21
- 2017-06-22; in: "Digital Engineering Technischer Systeme - Der Weg Zur Smart Factory",
(2017),
ISSN: 2196-7601;
77
- 85.
-
G. Artner, R. Langwieser, R. Zemann, C. Mecklenbräuker:
"Carbon Fiber Reinforced Polymer Integrated Antenna Module";
Talk: 2016 IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications (APWC),
Cairns;
2016-09-19
- 2016-09-23; in: "Proceedings of the 2016 IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications (APWC)",
(2016),
59
- 62.
More information
-
I. Ayatollahi, J. Brier, B. Mörzinger, M. Heger, F. Bleicher:
"SOA on smart manufacturing utilities for identification, data access and control";
Talk: 11th CIRP Conference on Intelligent Computation in Manufacturing Engineering - CIRP ICME '17,
Iscia, Italien (invited);
2017-07-19
- 2017-07-21; in: "Cirp Icme 17",
(2017),
ISSN: 2212-8271.
-
J. Bachmair, R. Gómez Vázquez, F. Bammer:
"A simple pulsed laser design for high harmonics generation";
Talk: XIX International Symposium on High-Power Laser Systems and Applications 2012,
Istanbul;
2012-09-10
- 2012-09-14; in: "SPIE Proceedings",
SPIE Proceedings,
8677 / 86771A (January 30, 2013)
(2013),
4 pages.
-
F. Badjgholi, B. Kittl, M. Stumptner:
"Automated Toolset Selection for Feature Manufacturing";
Talk: 7th International Conference on Artificial Intelligence in Design,
Cambridge, UK;
2002-07-15
- 2002-07-17; in: "Proceedings of Seventh International Conference on Artificial Intelligence in Design",
Kluwer Scientific Publisher,
(2002),
ISBN: 1-4020-0716-7.
More information
-
F. Badjgholi, B. Kittl, L. Wieser:
"A Knowledge Based Approach for the Design of Pressing Dies";
Talk: 15th International DAAAM Symposium,
Vienna;
2004-11-03
- 2004-11-06; in: "Annals of DAAAM for 2004 & Proceedings of the 15th International DAAAM Symposium",
B. Katalinic (ed.);
DAAAM International Vienna,
(2004),
ISBN: 3-901509-42-9;
23
- 24.
More information
-
J. Balic, F. Cus, M. Prasnicki, B. Katalinic:
"Computer-Aided Engineering System for Die/Mold Design and Manufacture";
Talk: 3rd International Conference on Automation Technology,
Taipei, Taiwan;
1994-07-06
- 1994-07-09; in: "Proc. 3rd International Conference on Automation Technology",
(1994),
45
- 47.
-
F. Bammer:
"A new concept for a high brilliance high power diode laser";
Talk: CLEO/Europe-EQEC 2003,
München;
2003-06-23
- 2003-06-26; in: "Lasers and Electro-Optics (CLEO Europe), 2003 Conference on",
IEEE,
(2003),
ISBN: 0-7803-7734-6;
159.
More information
-
F. Bammer:
"A New Concept for a High Power Diode Laser and Possible Applications";
Talk: M4PL17,
Igls/Tirol;
2004-01-21
- 2004-01-23; in: "Proceedings M4PL17",
A. Kaplan (ed.);
(2004),
21 pages.
More information
-
F. Bammer:
"New developments in the field of diode lasers";
Talk: GCL HPL 2006,
Gmunden (invited);
2006-09-04
- 2006-09-08; in: "Proceedings of GCL 06, XVI International Symposium on Gas Flow, Chemical Lasers and High-Power Lasers",
D. Schuöcker (ed.);
SPIE,
6346
(2007),
ISBN: 978-0-8194-6430-9;
63460T-1
- 63460T-6.
More information
-
F. Bammer:
"Q-switching with photo-elastic modulators";
Talk: GCL HPL 2006,
Gmunden;
2006-09-04
- 2006-09-08; in: "Proceedings of GCL 06, XVI International Symposium on Gas Flow, Chemical Lasers and High-Power Lasers",
D. Schuöcker (ed.);
SPIE,
6346
(2007),
ISSN: 0277-786x;
634611-1
- 634611-5.
More information
-
F. Bammer, R. Bielak, B. Holzinger, A. Kratky, G. Liedl, M. Kaltenbrunner, D. Schuöcker:
"New Developments in Lasers Assisted Forming";
Talk: ICONO/LAT Conference 2005,
St. Petersburg Russia (invited);
2005-05-11
- 2005-05-15; in: "Icono/Lat 2005",
(2005).
More information
-
F. Bammer, B. Holzinger:
"A compact high brilliance diode laser";
Talk: Photonics West 2006,
San Jose, Kalifornien, USA;
2006-01-21
- 2006-01-26; in: "Proceedings of SPIE, High-Power Diode Laser Technology and Applications IV",
SPIE,
6104
(2006),
ISSN: 0277-786x.
More information
-
F. Bammer, B. Holzinger:
"A new compact high brilliance diode laser type";
Talk: 2nd International Conference on Advanced Optoelectronics and Lasers,
Yalta, Krim, Ukraine;
2005-09-12
- 2005-09-17; in: "Second International Conference on Advanced Optoelectronics and Lasers",
I.A. Sukhoivanov, V.A. Svich, Y.S. Shmaliy (ed.);
Proceedings of SPIE,
7009
(2008).
More information
-
F. Bammer, B. Holzinger:
"Possibilities of time-multiplexing with diode lasers";
Poster: LANE 2004,
Erlangen;
2004-09-21
- 2004-09-24; in: "Laser Assisted Net Shape Engineering 4, Vol 2",
Meisenbach-Verlag Bamberg,
Volume 2
(2004),
ISBN: 3-87525-202-0;
1235
- 1242.
More information
-
F. Bammer, B. Holzinger:
"Realization of time-multiplexing for high power diode lasers";
Talk: GCL/HPL 2004,
Prague;
2004-08-30
- 2004-09-03; in: "XV International Symposium on Gas Flow, Chemical Lasers and High-Power Lasers",
Proceedings of SPIE,
5777
(2004),
ISBN: 0-8194-5760-4;
394
- 397.
More information
-
F. Bammer, B. Holzinger:
"Time-multiplexing of high power laser diodes yields a high brilliance laser beam";
Talk: 2nd International Conference on Advanced Optoelectronics and Lasers,
Yalta;
2005-09-12
- 2005-09-17; in: "Proceedings CAOL 2005",
IEEE,
CN 05TH8809
(2005),
ISBN: 0-7803-9130-6;
240
- 242.
-
F. Bammer, B. Holzinger, T. Schumi:
"A single crystal photo-elastic modulator";
Talk: Photonics West 2007,
San Jose, Kalifornien, USA;
2007-01-22
- 2007-01-24; in: "Proceedings of SPIE, Optical Components and Materials IV",
S. Jiang, M. Digonnet (ed.);
SPIE,
6469
(2007),
ISSN: 0277-786x;
64690O-1
- 64690O-8.
More information
-
F. Bammer, R. Petkovsek, H. Dominguez, G. Liedl:
"Nd:YAG-Laser-Q-switching with a Photo-Elastic Modulator and Applications";
Talk: Photonics Europe 2010,
Brüssel;
2010-04-12
- 2010-04-16; in: "Proceedings of SPIE, Solid State Lasers and Amüplifiers IV, and High-Power Lasers",
SPIE Proceedings,
Vol. 7721
(2010),
ISBN: 978-0-8194-8194-8;
77210Y-1
- 77210Y-6.
More information
-
F. Bammer, R. Petkovsek, M. Frede, B. Schulz:
"Q-switching with a Dual Mode Single Crystal Photo-Elastic Modulator";
Talk: GCL/HPL 2008,
Lissabon;
2008-09-15
- 2008-09-19; in: "Proceedings of GCL 08, XVII International Symposium on Gas Flow, Chemical Lasers and High-Power Lasers",
SPIE Proc.,
7131
(2008),
ISBN: 9780819473653;
7131H-1
- 7131H-4.
More information
-
F. Bammer, R. Petkovsek, J. Mozina, J. Petelin:
"A Small and Fast SCPEM-Based Ellipsometer";
Poster: Photonics West 2010,
San Francisco, USA;
2010-01-26
- 2010-01-28; in: "Proceedings of SPIE, Optical Components and Materials VII",
SPIE-Proceedings,
Vol. 7598
(2010),
ISBN: 9780819479945;
75981T-1
- 75981T-8.
More information
-
F. Bammer, R. Petkovsek, J. Mozina, D. Schuöcker:
"Q-switching a fiber laser with a dual mode single crystal photo-elastic modulator";
Talk: Photonics Europe 2008 (SPIE),
Straßburg;
2008-04-07
- 2008-04-10; in: "Solid State Lasers and Amplifiers III",
T. Graf, J. Terry, H. Jelinkova (ed.);
SPIE,
6998
(2008),
ISSN: 0277-786x;
1
- 8.
More information
-
F. Bammer, T. Schumi, D. Schuöcker:
"Hot Bending with a Fiber Coupled Solid State Laser";
Talk: GCL/HPL 2010,
Sofia;
2010-08-30
- 2010-09-03; in: "XVIII International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers",
SPIE,
7751
(2010),
775122-1
- 775122-6.
More information
-
G. Bas, P. Demircioglu, M.N. Durakbasa, P.H. Osanna:
"A nanometrological management approach to assess the profile and the surface characteristics of the end milling tools by multi-measurement analysis";
Talk: IMEKO XX World Congress International Measurement Confederation,
Busan, Korea;
2012-09-09
- 2012-09-14; in: "Proceedings of XX IMEKO World Congress International Measurement Confederation",
(2012),
ISBN: 978-89-950000-5-2;
6 pages.
More information
-
G. Bas, M.N. Durakbasa, I. Mankova, J. Beno:
"Application of Nanometrology for Assessing the Machining Tool Geometry and Analysis of the Micro/Nano Structure of the End Milling Tool Surfaces";
Talk: 9th International Conference on Measurement,
Smolenice, Slowakei;
2013-05-27
- 2013-05-30; in: "Proceedings of the 9th International Conference on Measurement",
J. Manka, M. Tysler, M. Witkowsky, i. Frollo (ed.);
VEDA Publishing House of the Slovak Academy of Sciences,
1
(2013),
ISBN: 978-80-969-672-5-4;
223
- 226.
More information
-
J. Bernreiter, F. Bleicher:
"FEM Simulation von Zerspanungsprozessen";
Talk: Abaqus Austria Regional User´s Meeting 2007,
Salzburg;
2007-11-12
- 2007-11-13; in: "Abaqus Austria User´s Conference 2007",
(2007),
29 pages.
-
J. Bernreiter, F. Bleicher:
"Hybridbearbeitung";
Talk: KC-Fachtagung NÖ,
Wirtschaftkammer NÖ;
2010-01-27; in: "Kunststoff- Cluster: Fachtagung - Spritzgießwerkzeuge",
(2010),
1
- 21.
-
R. Bielak, F. Bammer, G Schuöcker, G. Liedl, A. Kratky:
"Virtual age in education and training";
Poster: LANE 2004,
Erlangen;
2004-09-21
- 2004-09-24; in: "Proceedings of the 4th LANE",
Meisenbach Bamberg,
(2004),
ISBN: 3-87525-202-0;
1221
- 1226.
-
R. Bielak, G. Liedl, M. Behúlová:
"Contribution to the lightweight alloy warm tube hydroforming";
Talk: Comec 2010 : VI Conferencia Cientifica Internacional de Ingeniería Mecánica,
Villa Clara, Cuba;
2010-11-02
- 2010-11-04; in: "COMEC 2010",
(2010),
ISBN: 978-959-250-602-2.
-
R. Bielak, G. Liedl, R. Pospichal:
"FEM simulation of technical textiles laser cuting";
Talk: 12th International Conference Technology,
Bratislava;
2011-09-13; in: "Technology 2011",
Slovak University of Technology,
Bratislava
(2011),
ISBN: 978-80-227-3545-2;
371
- 376.
More information
-
R. Bielak, S. Murzin, G. Liedl, A. Otto et al.:
"Modelling of temperature fields in DP1000 steel during laser treatment using diffractive optical elements";
Talk: 2020 International Conference on Information Technology and Nanotechnology (ITNT),
Samara;
2020-05-26
- 2020-05-29; in: "Journal of Physics: Conference Series",
IOP,
1745
(2020),
ISBN: 978-1-7281-7041-1;
Paper ID 012016,
8 pages.
More information
-
D. Biermann, F. Bleicher, U. Heisel, F. Klocke, H.-C. Möhring, A. Shih:
"Deep Hole Drilling";
Talk: 68th CIRP General Assembly,
Tokyo; Japan (invited);
2018-08-19
- 2018-08-25; in: "CIRP Annals Manufacturing Technology",
Elsevier,
(2018).
-
R. Binder, M. Wiesauer:
"Analyzing the Impact of Different Drive Concepts on Machine Tool Dynamics Using Mechatronic System Simulation";
Talk: NAFEMS World Congress 2021,
online (invited);
2021-10-25
- 2021-10-29; in: "Proceedings: NWC2021",
(2021),
22.
-
F. Bleicher:
"Automatically Operating Calibration Method for a Three-Axis Parallel Kinematic Machine";
Talk: The 4th Chemnitz Parallel Kinematics Seminar,
Chemnitz;
2004-04-20
- 2004-04-21; in: "Parallel Kinematic Machines in Research and Practice",
R. Neugebauer (ed.);
Verlag Wissenschaftliche Scripten,
Volume 24/Zwickau
(2004),
ISBN: 3-937524-05-3;
165
- 181.
-
F. Bleicher:
"Calibration of three-axes machine tool based on parallel kinematics";
Talk: 12th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Focus on Precision Engineering,
Vienna;
2001-10-24
- 2001-10-27; in: "Intelligent Manufacturing & Automation",
(2001),
ISBN: 3-901509-19-4;
23
- 24.
-
F. Bleicher:
"Hybrid Machining";
Keynote Lecture: 16th International Scientific Conference on Production Engineering,
Zadar, Kroatien (invited);
2017-06-08
- 2017-06-10; in: "Proceedings of the CIM 2017",
(2017),
ISBN: 978-953-7689-04-9.
-
F. Bleicher:
"Neue Technologien in spanenden Werkzeugmaschinen";
Talk: Fertigungstechnisches Kolloquium Magdeburg 2014,
Magdeburg (invited);
2014-12-02
- 2014-12-03; in: "Moderne Fertigungstechnologien zur Steigerung von Leistung, Qualität und Effizienz",
Kongress: Fertigungstechnisches Kolloquium: Möhring, Hans-Christian; Karpuschewski, Bernhard; Bähr, Rüdiger,
Magdeburg
(2014),
ISBN: 978-3-944722-20-7;
34
- 47.
-
F. Bleicher:
"Neue Werkzeugmaschinenkonzepte auf Basis von Parallelkinematiken";
Talk: 2. Österreichische Technologie-Transfer-Tage,
Leoben (invited);
2001-03-22
- 2001-03-23; in: "2. Österreichische Technologie-Transfer-Tage",
(2001).
More information
-
F. Bleicher:
"WPK 2014 Industrie 4.0 - die intelligente Fabrik der Zukunft";
Talk: Wiener Produktionstechnik Kongress 2014,
Wien;
2014-05-07
- 2014-05-08; in: "Industrie 4.0 - die intelligente Fabrik der Zukunft",
Klein Publishing GmbH,
Wien
(2014),
ISBN: 978-3-903015-00-5;
3
- 4.
-
F. Bleicher, C. Baumann, S. Krall, S. Mates, S. Herzig:
"Considering the influence of heating rate, complex hardening and dynamic strain aging in AISI 1045 machining: experiments and simulations";
Keynote Lecture: CIRP General Assembly,
virtual conference (invited);
2021-08-23
- 2021-08-28; in: "CIRP Annals - Manufacturing Technology",
Elsevier,
(2021),
ISSN: 0007-8506;
49
- 52.
-
F. Bleicher, J. Bernreiter:
"Hybrid-Machining Of Brittle-Hard Materials";
Poster: 27th Symposium on advances in experimental machanics,
Wroclaw;
2010-09-22
- 2010-09-25; in: "27th Symposium on advances in experimental machanics",
(2010),
ISBN: 978-83-87982-59-1;
11
- 12.
-
F. Bleicher, J. Bernreiter:
"Hybridbearbeitung von SiC - Optimierung der spanenden Bearbeitung durch Ultraschallanregung";
Talk: Zerspanen im modernen Produktionsprozess,
Dortmund;
2010-09-14
- 2010-09-15; in: "Zerspanen im modernen Produktionsprozess",
D. Biermann (ed.);
Vulkan Verlag,
Dortmund
(2010),
ISBN: 978-3-8027-8755-3;
47
- 55.
More information
-
F. Bleicher, J. Bernreiter:
"Interaktion Maschine - Prozess durch Mechatronik";
Keynote Lecture: Icmc 2012 / 2. Eniprod-Kolloquium,
Chemnitz (invited);
2012-04-17
- 2012-04-18; in: "Ressourceneffiziente Technologien für den Powertrain",
Verlag Wissenschaftliche Scripten,
(2012),
ISBN: 978-3-942267-40-3;
195
- 211.
-
F. Bleicher, J. Bernreiter:
"Machine and Process Interaction by Mechatronics";
Keynote Lecture: 9th International Conference on Machine Tools, Automation, Technology and Robotics,
Prag;
2012-09-12
- 2012-09-14; in: "Matar 2012",
MM Science Journal,
Special Issue
(2012),
ISSN: 1803-1269;
1
- 6.
-
F. Bleicher, J. Bernreiter:
"Mechanische Oberflächenmodifikation und Strukturierung als Technologie für den Werkzeugbau";
Talk: KC-Fachtagung,
Wirtschaftkammer NÖ (invited);
2010-01-27; in: "Kunststoff- Cluster: Fachtagung - Spritzgießwerkzeuge",
(2010),
18.
-
F. Bleicher, J. Bernreiter, M. Heger, R. Prenner, S. Wallner, N. Krouzecky:
"Digital Scale Modelling of rough Boundaries in Spillway Conduits";
Poster: 27th Symposium on advances in experimental machanics,
Wroclaw;
2010-09-22
- 2010-09-25; in: "27th Symposium on advances in experimental machanics",
(2010),
ISBN: 978-83-87982-59-1;
13
- 14.
-
F. Bleicher, J. Bernreiter, M. Obermair:
"Trends in der Fertigungstechnik";
Talk: Wiener Produktionstechnik Kongress 2012,
Wien;
2012-10-10
- 2012-10-11; in: "Die Zukunft der Fertigungstechnik - Tagungsband Wiener Produktionstechnik Kongress 2012",
F. Bleicher, M. Obermair (ed.);
Neuer Wissenschaftlicher Verlag GmbH Nfg KG,
Wien - Graz
(2012),
ISBN: 978-3-7083-0872-2;
17
- 32.
-
F. Bleicher, J. Brier, C. Baumann, S. Krall, J. Sacherl, K. Yamazaki:
"Design concept of a long-stroke vibration-assisted actuator";
Talk: MTTRF Annual Meeting 2020,
USA (invited);
2020-07-01
- 2020-07-03; in: "The Proceedings of MTTRF 2020 Meetings",
(2020),
131
- 136.
-
F. Bleicher, J. Brier, S. Krall, D. Nikolaev, M. Reiter, A. Steininger:
"Investigation of the Dynamic Behavior in Drilling with Indexable Insert Drills and Influence of the Contact Energy on Surface Modification by Machine Hammer Peening";
Talk: MTTRF 2017,
San Francisco (invited);
2017-07-05
- 2017-07-07; in: "MTTRF Annual Meeting 2017",
(2017).
More information
-
F. Bleicher, J. Brier, A. Siller:
"Simultaneous machining of a material combination with an internally and externally cooled cutting insert";
Talk: 7th HPC 2016 - CIRP Conference on High Performance Cutting,
University Of British Columbia, Vancouver, B.C. Canada (invited);
2016-05-31
- 2016-06-02; in: "Procedia CIRP 46 (2016)",
ELSEVIER,
(2016),
ISSN: 2212-8271;
15
- 18.
-
F. Bleicher, A. Fritsche:
"Dynamic grinding hub monitoring during a high performance grinding process with ceramic CBN on cold work steel";
Talk: 12th HSM 2015 International Conference on High Speed Machining,
Nanjing, China (invited);
2015-10-18
- 2015-10-20; in: "Materials Science Forum",
Trans Tech Publications Ltd., CH,
836-837
(2015),
ISSN: 0255-5476;
545
- 551.
-
F. Bleicher, Ch. Habersohn, M. Fuchs:
"Computer integrated manufacturing and high speed machining";
Talk: CIM 2015 - 15th International Scientific Conference on Production Engineering,
Vodice, Kroatien (invited);
2015-06-10
- 2015-06-13; in: "CIM 2015 - 15th International Scientific Conference on Production Engineering",
Hrvatska Udruga Proizvodnog Strojarstva, Zagreb,
(2015),
ISBN: 978-953-7689-03-2;
19
- 31.
-
F. Bleicher, F. Holy:
"Entwicklung von der EMO - Maschine zur Serienlösung des Quicksteps";
Talk: Fertigungstechnisches Kolloquium Stuttgart,
Stuttgart (invited);
2000-09-26
- 2000-09-27; in: "Stuttgarter Impulse - Technologien für die Zukunft",
Springer-Verlag Berlin Heidelberg New York,
(2000),
ISBN: 3-540-67984-7;
334
- 341.
More information
-
F. Bleicher, S. Krall, J. Brier, J. Diebold:
"Application of low and high frequency vibration in grinding and surface structuring";
Talk: Mttrf/iam-Cnc Annual Meeting 2019,
San Francisco (invited);
2019-06-27
- 2019-06-29; in: "MTTRF 2019",
(2019).
-
F. Bleicher, C. Lechner:
"Surface improvement in mold and die production by machine hammer peening";
Talk: MTTRF Annual Meeting 2014,
San Francisco (invited);
2014-06-25
- 2014-06-27; in: "The Proceedings of MTTRF 2014 Annual Meeting",
Machine Tool Technologies Research Foundation,
(2014),
223
- 238.
-
F. Bleicher, C. Lechner, Ch. Habersohn, E. Kozeschnik, B. Adjassoho, H. Kaminski:
"Mechanism of surface modification using machine hammer peening technology";
Talk: CIRP - 62nd General Assembly,
Hong Kong (invited);
2012-08-19
- 2012-08-25; in: "CIRP Annals-Manufacturing Technology",
CIRP Annals-Manufacturing Technology,
61
(2012),
ISSN: 0007-8506;
375
- 378.
-
F. Bleicher, C. Lechner, Ch. Habersohn, M. Obermair, F. Heindl, M. Rodríguez Ripoll:
"Improving the tribological characteristics of tool and mould surfaces by machine hammer peening";
Talk: Cirp 2013 - 63rd General Assembly,
Copenhagen (invited);
2013-08-18
- 2013-08-24; in: "Cirp Annals - ManufacturingTechnology",
Science Direct,
62/1
(2013),
ISSN: 0007-8506;
239
- 242.
-
F. Bleicher, C. Lechner, M. Obermair, S. Krall:
"Improvement of die casting life time by machine hammer peening";
Keynote Lecture: HSM 2014 11th Conference Hig Speed Machining,
Prag (invited);
2014-09-11
- 2014-09-12; in: "Proceedings of the 11th International Conference on High Speed Machining",
Czech Machine Tool Society CMTS,
(2014),
ISBN: 978-80-904077-7-0;
7
- 13.
-
F. Bleicher, T. Mikats:
"Next Generation of Machine Tools - Flexible, Versatile und Highly Productive";
Talk: 14th International Scientific Conference on Production Engineering,
Biograd (invited);
2013-06-19
- 2013-06-22; in: "CIM 2013 Computer Integrated Manufacturing and High Speed Machining",
Croatian Association of Production Engineering,
Zagreb
(2013),
ISBN: 978-953-7689-02-5;
13
- 23.
-
F. Bleicher, C. Pollak, J. Brier, A. Siller:
"Reduction of built-up edge formation in machining Al- and cast iron hybrid components by internal cooling of cutting inserts";
Talk: CIRP,
Guimaraes - Portugal (invited);
2016-08-21
- 2016-08-27; in: "CIRP ANNALS 2016 Manufacturing Technology",
CIRP,
65/1
(2016),
ISSN: 0007-8506;
97
- 98.
-
F. Bleicher, C. Pollak, A. Siller:
"Precision machining of aluminium and cast iron material combination with a long overhanging boring tool";
Talk: MTTRF and iAM-CNC Annual Meeting 2015,
San Francisco (invited);
2015-06-30
- 2015-07-02; in: "The proceedings of MTTRF 2015 Meeting",
(2015),
239
- 244.
-
F. Bleicher, F. Puschitz, A. Theiner:
"Laser Based Measurement System for Calibrating Machine Tools in 6 DOF";
Talk: The 5th Chemnitz Parallel Kinematics Seminar,
Chemnitz;
2006-04-25
- 2006-04-26; in: "Parallel Kinematic Machines in Research and Practice",
R. Neugebauer (ed.);
Verlag Wissenschaftlicher Scripten,
Zeickau
(2006),
ISBN: 3-937524-40-1;
617
- 634.
More information
-
F. Bleicher, C. Ramsauer, M. Leonhartsberger, M. Lamprecht, P. Stadler, D. Strasser, C. Wiedermann:
"Tooling systems with integrated sensors enabling data based process optimization";
Keynote Lecture: 32nd CIRP Sponsored Conference on Supervising and Diagnostics of Machining Systems,
Web-Meeting (invited);
2021-06-28; in: "Journal of Machine Engineering",
Vol. 21 Nr1
(2021),
ISSN: 1895-7595;
5
- 21.
More information
-
F. Bleicher, C. Ramsauer, R. Oswald, N. Leder, P. Schörghofer:
"Method for determining edge chipping in milling based on tool holder vibration measurements";
Keynote Lecture: CIRP General Assembly,
virtual conference (invited);
2021-08-23
- 2021-08-28; in: "CIRP Annals - Manufacturing Technology",
Elsevier,
Vol. 69 Nr1
(2021),
ISSN: 0007-8506;
101
- 104.
-
F. Bleicher, C. Ramsauer, R. Oswald, M. Wiesauer, S. Krall, C. Baumann, K. Yamazaki:
"Machine diagnostics by means of a low-cost sensor integrated into the tooling system";
Talk: MTTRF Annual Meeting 2020,
USA (invited);
2020-07-01
- 2020-07-03; in: "The Proceedings of MTTRF 2020 Meetings",
(2020),
45
- 54.
-
F. Bleicher, C. Reichl, F. Linhardt, P. Wimberger, Ch. Habersohn, S. Krall:
"Investigation of Noise Transmission of a Machine Tool Enclosure";
Talk: CIRP Sponsored Conference on Supervising and Diagnostics of Machining Systems,
KARPACZ, Polen (invited);
2019-03-10
- 2019-03-14; in: "Journal of Machine Engineering",
Volume 19, Nr. 3
(2019),
ISSN: 2391-8071;
5
- 16.
-
F. Bleicher, M. Reiter:
"Wear reduction on cutting inserts by additional internal cooling of the cutting edge";
Talk: 15th Global Conference on Sustainable Manufacturing,
Haifa, Israel (invited);
2017-09-25
- 2017-09-27; in: "Procedia Manufacturing",
Elsevier,
(2018),
ISSN: 2351-9789;
518
- 524.
-
F. Bleicher, M. Reiter, J. Brier:
"Increase of chip removal rate in single-lip deep hole drilling at small diameters by low-frequency vibration support";
Talk: CIRP General Assembly 2019,
Birmingham (invited);
2019-08-18
- 2019-08-24; in: "CIRP Annals - Manufacturing Technology",
Elsevier,
Vol 68
(2019),
ISSN: 0007-8506;
93
- 96.
-
F. Bleicher, M. Reiter, J. Brier:
"Machining of iron-carbon alloys by the use of poly-crystalline diamond cutting inserts with internal cooling";
Talk: MTTRF 2018,
San Francisco; USA (invited);
2018-07-01
- 2018-07-03; in: "MTTRF Annual Meeting 2018",
(2018),
ISSN: 2504-4494.
-
F. Bleicher, P. Schörghofer:
"Intelligente Werkzeug-und Prozesslösungen für eine vernetzte Produktion";
Talk: "KMU 4.0" Intelligente Fertigungstechnologie für kleine und mittelständische Unternehmen,
Magdeburg (invited);
2016-03-09
- 2016-03-10; in: "FKM",
(2016).
-
F. Bleicher, P. Schörghofer, N. Leder, C. Ramsauer, R. Oswald, S. Krall:
"Cognitive machining by sensor integration in tooling systems";
Talk: Mttrf/iam-Cnc Annual Meeting 2019,
San Francisco (invited);
2019-06-27
- 2019-06-29; in: "MTTRF 2019",
(2019).
-
F. Bleicher, W. Schwanzer, A. Wolf:
"Quickstep - Vorstellung eines parallelen Maschinenkonzepts mit drei Freiheitsgraden";
Talk: 2. Chemnitzer Parallelkinematik-Seminar,
Chemnitz;
2000-04-12
- 2000-04-13; in: "Working Accuracy of Parallel Kinematics",
Verlag Wissenschaftliche Scripten,
(2000),
ISBN: 3-928921-54-1;
283
- 290.
More information
-
F. Bleicher, A. Steininger:
"Influencing the process stability for tapping through and blind holes by taps with radial lubricant supply";
Talk: 38th International Conference on Advanced Manufacturing MATADOR,
Taiwan, Yunlin;
2015-03-28
- 2015-03-30; in: "Proc. 38th International MATADOR conference",
(2015),
128
- 131.
-
F. Bleicher, A. Steininger:
"Investigation of the Dynamic Behavior in Drilling with Indexable Insert Drills and Influence of the Contact Energy on Surface Modification by MHP";
Talk: MTTRF 2017,
San Francisco (invited);
2017-07-05
- 2017-07-07; in: "Machine Tool Technologies Research Foundation Annual Meeting 2017",
(2017).
-
F. Bleicher, A. Steininger, D. Finkeldei:
"Determination of coefficients of friction using an inverse pin-on-disc-test setup implemented on a machining center";
Talk: MTTRF 2018,
San Francisco; USA (invited);
2018-07-01
- 2018-07-03; in: "MTTRF Annual Meeting 2018",
(2018),
ISSN: 2504-4494.
-
F. Bleicher, M. Trappl:
"Machining of Curved Holes by Actuated EDM Tool Head with Integrated Sensors for In-process Control";
Talk: CIRP General Assembly 2019,
Birmingham (invited);
2019-08-18
- 2019-08-24; in: "CIRP Annals - Manufacturing Technology",
(2019),
ISSN: 0007-8506.
-
F. Bleicher, H. Weseslindtner:
"Produktionstechnik als Wettbewerbsfaktor der Zukunft";
Talk: 2. Tiroler Innovationstag,
Innsbruck (invited);
2004-10-12; in: "2. Tiroler Innovationstag",
2
(2004),
1
- 35.
More information
-
I. Bogrekci, P. Demircioglu, Y. Cerci, C. Deniz, M.N. Durakbasa:
"Roughness measurement verification of the surface structures produced by different manufacturing techniques by wavelet transform";
Talk: ISMQC - International Symposium on Measurement and Quality Control,
Krakow-Kielce, Polen;
2013-09-11
- 2013-09-13; in: "Proceedings of the 11th International Symposium on Measurement and Quality Control",
Osaka University,
(2013).
More information
-
C. Buchner, Z. Zelenka, T. Mikats, F. Bleicher:
"Determination of forces from 10 N up to 250 kN using two full automatical dead weight machines developed by the BEV";
Talk: IMEKO XX World Congress International Measurement Confederation,
Busan, Korea;
2012-09-09
- 2012-09-14; in: "IMEKO XX World Congress International Measurement Confederation",
(2012),
##.
-
U. Buyuk, A. Akdogan, S. Vanli, M.N. Durakbasa:
"Minimizing Coating Process Sourced Hydrogen Embrittlement Of Fasteners";
Talk: 32nd International DAAAM Virtual Symposium,
Wien, Österreich;
2021-10-28
- 2021-10-29; in: "Intelligent Manufacturing & Automation",
B. Katalinic (ed.);
Proceedings of the 32nd International DAAAM Virtual Symposium / DAAAM International, Vienna, Austria, EU, 2021,
Volume 32, No.1 ISSN 1726-9679, ISBN 978-3-902734-33-4
(2021),
ISSN: 1726-9679;
508
- 513.
More information
-
M. Cakmakci, M.N. Durakbasa, M. Karasu, G. Bas:
"The relationship between the quality engineering and Taguchi methodology";
Talk: ISMQC - International Symposium on Measurement and Quality Control,
Krakow-Kielce, Polen;
2013-09-11
- 2013-09-13; in: "Proceedings of the 11th International Symposium on Measurement and Quality Control",
Osaka University,
(2013),
4 pages.
More information
-
M. Cakmakci, N. Ortabas-Demirel, M.N. Durakbasa, G. Bas, A. Hornikova:
"Interaction Between Capability Indices and Skewness of Non-Normal Processes Using Quantile Based Estimation and Johnson Transformation";
Talk: QIEM 2nd International Conference on Quality and Innovation in Engineering and Management,
Cluj-Napoca, RO;
2012-11-22
- 2012-11-24; in: "Quality Access to Success - QIEM 2nd International Conference on Quality and Innovation in Engineering and Management",
Quality-Access to Success,
Vol.13, S5, November 2012
(2012),
ISSN: 1582-2559;
8 pages.
More information
-
I. Cavusoglu, M.N. Durakbasa:
"Internal Customer Satisfaction Via Precaution of Occupational Health and Safety Being Accurately Accomplished While Manufacturing End Product Made of Glass Fiber Reinforced Polymer by Means of Integrated Management";
Talk: The 23rd International Conference on Production Research,
Manila, Philippinen (invited);
2015-08-02
- 2015-08-06; in: "ICPR23 Full Paper",
(2015),
Paper ID 1133,
7 pages.
More information
-
I. Cavusoglu, M.N. Durakbasa:
"The Quality Improvement Process Through Application Of Multi-Vari Chart In An Automotive Supplier";
Talk: Proceedings of ICPR-AEM and QIEM 2014 Conference,
Cluj-Napoca, Rumänien;
2014-07-01
- 2014-07-05; in: "2014 INTERNATIONAL CONFERENCE ON PRODUCTION RESEARCH - REGIONAL CONFERENCE AFRICA, EUROPE AND THE MIDDLE EAST and 3rd INTERNATIONAL CONFERENCE ON QUALITY AND INNOVATION IN ENGINEERING AND MANAGEMENT",
Technical University of Cluj- Napoca
(2014),
ISBN: 978-973-662-978-5;
4 pages.
More information
-
I. Cavusoglu, M.N. Durakbasa:
"TOTAL QUALITY MANAGEMENT (TQM) AND PROCESS IMPROVEMENT METHODS IN THE MODERN MANUFACTURING SYSTEMS";
Poster: ICPM 2005 Proceedings,
Wien;
2005-10-18
- 2005-10-19; in: "III. INTERNATIONAL CONGRESS OF PRECISION MACHINING",
A. Afjehi-Sadat, M.N. Durakbasa, P.H. Osanna (ed.);
(2005),
ISBN: 3-901-888-31-4;
89
- 94.
-
I. Cavusoglu, M.N. Durakbasa, P.H. Osanna:
"PROCESS PERFORMANCE EVALUATION AND IMPROVEMENT FOR THE QUALITY PROGRESS IN THE INDUSTRIAL MANUFACTURING SYSTEMS";
Poster: IMEKO XVIII World Congress,
Rio de Janeiro;
2006-09-17
- 2006-09-22; in: "METROLOGY FOR A SUSTAINABLE DEVELOPMENT",
LETRA CAPITAL EDITORA,
Rio de Janeiro, B
(2006),
#.
-
Y. Cerci, P. Demircioglu, I. Bogrekci, C. Deniz, M.N. Durakbasa:
"Case study in thermal and wear analyses for cutting tools";
Talk: ISMQC - International Symposium on Measurement and Quality Control,
Krakow-Kielce, Polen;
2013-09-11
- 2013-09-13; in: "Proceedings of the 11th International Symposium on Measurement and Quality Control",
Osaka University,
(2013),
4 pages.
More information
-
D. Coskun, P. Demircioglu, I. Bogrekci, M.N. Durakbasa:
"Electrodynamical considerations in r-t measurements of high Tc bulk superconductivity: an inexpensive set up design";
Talk: QIEM 2nd International Conference on Quality and Innovation in Engineering and Management,
Cluj-Napoca, RO;
2012-11-22
- 2012-11-24; in: "Quality Access to Success - QIEM 2nd International Conference on Quality and Innovation in Engineering and Management",
Quality-Access to Success,
Vol.13, S5, November 2012
(2012),
ISSN: 1582-2559;
8 pages.
More information
-
C. Davutoglu, C. Tepeköylü, E. Güclü, G. Bas:
"INTACT - Intelligent Test Automation System to Achieve Improved Quality";
Talk: International Business Information Management Association Conference (IBIMA),
Wien, Österreich;
2013-06-27
- 2013-06-28; in: "Vision 2020: Innovation, Development Sustainability, and Economic Growth, Proceedings of the 21st International Business Information Management Association Conference (IBIMA)",
(2013),
ISBN: 978-0-9860419-0-7;
Paper ID 1481-1486,
6 pages.
More information
-
P. Demircioglu, I. Bogrekci, Y. Cerci, C. Deniz, G. Bas, M.N. Durakbasa:
"Assessment of cylinder liners using computer vision andnumerical thermal analyses";
Talk: ISMQC - International Symposium on Measurement and Quality Control,
Krakow-Kielce, Polen;
2013-09-11
- 2013-09-13; in: "Proceedings of he 11th International Symposium on Measurement and Quality Control",
Osaka University,
(2013).
More information
-
P. Demircioglu, M.N. Durakbasa, P.H. Osanna, I. Bogrekci:
"Surface roughness assessment of machined metal surfaces using image processing techniques";
Talk: 10th International Symposium on Measurement Technology and Intelligent Instruments,
KAIST, Daejeon, Korea;
2011-06-29
- 2011-07-02; in: "ISMTII 2011",
1
(2011),
1
- 4.
-
P. Demircioglu, M.N. Durakbasa, O. Tan:
"A Comparison Between Contact Type Profilometer and Different D Optical Techniques: A Case Study in Characterization of Machined Surface Structures";
Talk: QIEM 2nd International Conference on Quality and Innovation in Engineering and Management,
Cluj-Napoca, RO;
2012-11-22
- 2012-11-24; in: "Quality Access to Success - QIEM 2nd International Conference on Quality and Innovation in Engineering and Management",
Quality-Access to Success,
Vol.13, S5, November 2012
(2012),
ISSN: 1582-2559;
117 pages.
More information
-
P. Demircioglu, A. Gunay Bulutsuz, B. Sagbas, I. Bogrekci, M.N. Durakbasa:
"Surface Topographical Investigations of the Machining Effects on Turning with Coated lnserts for Different Materials";
Talk: 7th International Conference and Exhibition on Design and Production of Machines and Dies/Molds,
Antalya;
2013-06-20
- 2013-06-23; in: "Design and Production of Machines and Dies/Molds",
M. Akkök, E. Budak, M. Firat, B. Kaftanoglu (ed.);
Atilim University Publications,
46,
(2013),
ISBN: 978-975-6707-38-8;
285
- 288.
-
J. Diebold, G. Wiesinger, F. Bleicher:
"Cutting Deviations In Bandsawing Of Cylindrical Metal Parts";
Talk: 37th Danubia-Adria Symposium on Advances in Experimental Mechanics,
Johannes Kepler University, Linz, (invited);
2021-09-21
- 2021-09-24; in: "Book of Abstracts",
(2021),
ISBN: 978-3-9504997-0-4;
186
- 187.
-
C. Dorn, F. Bleicher:
"Untersuchung zur Energieeffizienz von Werkzeugmaschinen unter Berücksichtigung der kinematischen Struktur und der Prozesskräfte";
Keynote Lecture: Industrielles Symposium Mechatronik,
Linz (invited);
2010-11-18; in: "Smart Production",
(2010).
More information
-
C. Dorn, I. Kovacic, K. Orehounig, U. Renger, F. Bleicher, A. Mahdavi, S. Brandstetter, A. Dimitriou:
"Energy Efficient Production - Interdisciplinary, Systemic Approach Through Integrated Simulation";
Talk: The 6th Dubrobnik Conference on Sustainable Development of Energy, Water, an Environment Systems,
Dubrovnik;
2011-09-25
- 2011-09-29; in: "Sustainable Development Of Energy, Water And Environment Systems / 2011 / Croatia",
Z. Bogdan et al. (ed.);
Zagreb, Croatia
(2011),
ISBN: 978-953-7738-12-9;
307
- 320.
More information
-
C. Dorn, M. Stark, F. Bleicher, J. Bernreiter:
"Analyse Of Load Profile Of A Vertical And Horizontal Machining Center";
Poster: 27th Symposium on advances in experimental machanics,
Wroclaw;
2010-09-22
- 2010-09-25; in: "27th Symposium on advances in experimental mechanics",
(2010),
ISBN: 978-83-87982-59-1;
47
- 48.
More information
-
P. Drobniak, A. Otto, R. Gómez Vázquez, R. Arias, J. Arias:
"Simulation of keyhole laser welding of stainless steel plates with a gap";
Talk: 11th CIRP Conference on Photonic Technologies [LANE 2020],
Online;
2020-09-07
- 2020-09-10; in: "Procedia CIRP 94",
M. Schmidt, F. Vollertsen, E. Govekar (ed.);
Elsevier,
(2020),
ISSN: 2212-8271;
731
- 736.
More information
-
S. Dumss, M. Weber, C. Schwaiger, C. Sulz, P. Rosenberger, M. Grafinger, M. Weigold:
"EuProGigant - A Concept Towards an Industrial System Architecture for Data-Driven Production Systems";
Talk: 54th CIRP Conference on Manufacturing Systems, 2021,
Athen (invited);
2021-09-22
- 2021-09-24; in: "Procedia CIRP 104",
Elsevier B.V.,
104C
(2021),
324
- 329.
-
M.N. Durakbasa:
"A Modern Scheme for Education, Training and Certification of Quality Personnel and Persons Working in Metrology and Engineering";
Keynote Lecture: 2nd INTERNATIONAL 6th NATIONAL VOCATIONAL SCHOOLS SYMPOSIUM 2011,
Aydin TR (invited);
2011-05-25
- 2011-05-27; in: "UMYOS'2011",
1, AYDIN
(2011),
8 pages.
-
M.N. Durakbasa:
"Advanced Industrial Manufacturing Systems on Basis of Intelligent Precision Metrology";
Keynote Lecture: Turkish National Comitee of Automatic Control 2011 National Meeting,
Izmir (invited);
2011-09-14
- 2011-09-16; in: "TOK 2011",
(2011),
xxiii
- xxx.
-
M.N. Durakbasa:
"Fertigungsmesstechnik aus der Sicht der Internationalen Normung";
Talk: Kvalita a GPS 2005,
Brno, CZ;
2005-09-20
- 2005-09-21; in: "Kvalita a GPS 2005",
(2005),
ISBN: 80-214-3033-8;
41
- 48.
-
M.N. Durakbasa:
"Industrie 4.0: Integrated Solutions using Advanced Production and Metrology Technologies";
Keynote Lecture: 39. Operations Research / Industrial Engineering National Congress - YAEM 2019 (39. Yöneylem Arastirmasi ve Endüstri Mühendisligi (YA/EM) Ulusal Kongresi),
Ankara, Türkei (invited);
2019-06-12
- 2019-06-14; in: "39. Operations Research / Industrial Engineering National Congress - Operations Research and Industrial Engineering in Healthcare Systems",
1
(2019),
7
- 8.
More information
-
M.N. Durakbasa:
"Nanometrologia a nanotechnologie v strojarstve";
Talk: 41. Forum metrologov,
Gerlachov - SK (invited);
2011-11-21
- 2011-11-22; in: "Metrologicke Listy",
Rocnik XXXIV METROLOGICKE LISTY c. 2/2011
(2011),
46
- 54.
-
M.N. Durakbasa, A. Afjehi-Sadat, P.H. Osanna:
"Metrology of the Structure of High Precision Machined Workpiece Surfaces";
Talk: International Scientific Conference MicroCAD 2006,
Miskolc, Ungarn (invited);
2006-03-16
- 2006-03-17; in: "MicroCAD 2006",
(2006),
ISBN: 9636617007;
193
- 202.
-
M.N. Durakbasa, A. Akdogan, S. Vanli, A. Günay:
"Determination of Cutting Tool Geometries with High Precise Measurement Techniques and Investigation of Their Effects on Workpiece Surface Properties";
Talk: 12th IMEKO TC10 Workshop on Technical Diagnostics,
Florence;
2013-06-06
- 2013-06-07; in: "New Perspectives in Measurements, Tools and Techniques for Industrial Applications",
IMEKO - International Measurement Confederation, University of Florence,
(2013),
ISBN: 978-88-903149-8-8;
106
- 111.
-
M.N. Durakbasa, P. Aksoy:
"Characterization and Analysis of High-Precise Surface Structures by Contact and Non-Contact Methods";
Talk: Proceedings of the 1st International Conference for Young Reasarchers and PhD. Students,
Bratislava;
2007-04-25
- 2007-04-26; in: "ERIN 2007 PROCEEDINGS",
(2007),
ISBN: 978-80-227-2636-8;
61.
-
M.N. Durakbasa, G. Bas:
"An Analysis Of The Metrology Techniques To Improve Quality And Accuracy";
Talk: XXIX. microCAD International Multidisciplinary Scientific Conference,
Ungarn;
2015-04-09
- 2015-04-10; in: "MultiScience - XXIX. microCAD International Multidisciplinary Scientific Conference",
ITTC Innovation and Technology Transfer Centre,
University of Miskolc
(2015),
ISBN: 978-963-358-061-5;
Paper ID D1-1,
7 pages.
More information
-
M.N. Durakbasa, G. Bas:
"Modeling Efficiency Improvement in Industry Through Implementation of Energy Management Systems";
Talk: Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems,
Dubrovnik, Kroatien;
2011-09-25
- 2011-09-29; in: "Proceedings of the 6th Conference",
(2011),
ISBN: 978-953-7738-12-9;
1
- 7.
-
M.N. Durakbasa, G. Bas:
"Surface Roughness Investigation of the Cutting Edge Of The High Precision Cutting Tools Enabled By Micro and Nanometrological Measurements";
Talk: XXVII. microCAD International Scientific Conference,
Miskolc, Ungarn;
2013-03-21
- 2013-03-22; in: "Proceedings of the XXVII. microCAD International Scientific Conference",
(2013),
ISBN: 978-963-358-018-9;
5 pages.
More information
-
M.N. Durakbasa, G. Bas:
"The Integration Of Energy And Environmental Management System To A Model Of Industrial Plant";
Talk: XXV, microCAD International Scientific Conference,
Miskolc, Ungarn;
2011-03-31
- 2011-04-01; in: "XXV, microCAD International Scientific Conference",
ITTC Innovation and Technology Transfer Centre,
ME.Tu-162
(2011),
ISBN: 978-963-661-954-1;
27
- 32.
-
M.N. Durakbasa, G. Bas, J.M. Bauer:
"A Holistic And Integrated Strategy To Improve Energy Efficiency In Industry By Target-Setting Modeling";
Talk: ELAEE 2013, Latin American Meeting on Energy Economics,
Montevideo, Uruguay;
2013-04-08
- 2013-04-09; in: "Proceedings of the ELAEE 2013 Conference, 4th Latin American Meeting on Energy Economics",
(2013),
5 pages.
More information
-
M.N. Durakbasa, G. Bas, J.M. Bauer, L. Kräuter:
"Development of an advanced metrology and intelligent quality management as a strategic approach in manufacturing industry";
Keynote Lecture: ISMQC - International Symposium on Measurement and Quality Control,
Krakow-Kielce, Polen;
2013-09-11
- 2013-09-13; in: "Proceedings of the 11th International Symposium on Measurement and Quality Control",
Osaka University,
(2013),
4 pages.
More information
-
M.N. Durakbasa, G. Bas, J.M. Bauer, G. Poszvek:
"Intelligent Design and Advanced Metrology as Strategic Approaches to Efficiency and Quality Improvement in Smart Manufacturing";
Keynote Lecture: Total Quality Management-Advanced and Intelligent Approaches (TQM) 2013,
Belgrad, Serbien (invited);
2013-06-03
- 2013-06-07; in: "The 7th International Working Conference "Total Quality Management - Advanced and Intelligent Approaches"",
(2013),
ISBN: 978-86-7083-791-1;
Paper ID 17-22,
6 pages.
More information
-
M.N. Durakbasa, G. Bas, P. Demircioglu:
"A nanometrological process management model to assess the end milling tools in the machining industry";
Talk: 13th International Conference on Tools ICT 2012,
Miskolc, Ungarn;
2012-03-27
- 2012-03-28; in: "Proceedings of the 13th International Conference on Tools ICT 2012",
(2012),
ISBN: 978-963-9988-35-4;
271
- 276.
More information
-
M.N. Durakbasa, G. Bas, L. Kräuter, G. Poszvek:
"The Assessment of Industrial Manufacturing Systems Towards Advanced Operations by Means of Integrated Modeling Approach";
Talk: International Business Information Management Association Conference (IBIMA),
Wien, Österreich;
2013-06-27
- 2013-06-28; in: "Vision 2020: Innovation, Development Sustainability, and Economic Growth, Proceedings of the 21st International Business Information Management Association Conference (IBIMA",
(2013),
ISBN: 978-0-9860419-0-7;
Paper ID 1418-1426,
9 pages.
More information
-
M.N. Durakbasa, G. Bas, Z. Özkan:
"A Proposal Of Methodology For The Strategy And Implementation Of Energy Management Within The Integrated Management Systems";
Talk: 16th World Productivity Congress and European Productivity Conference,
Antalya, Türkei;
2010-11-02
- 2010-11-05; in: "16th World Productivity Congress and European Productivity Conference",
MPM National Productivity Centre of Türkiye - WCPS World Confederation of Productivity Science,
(2010),
5 pages.
-
M.N. Durakbasa, G. Bas, P.H. Osanna, J.M. Bauer:
"Sustainable Management Systems of Quality, Energy and Environment in Industry";
Talk: 1st International Conference Quality and Innovation in Engineering and Management,
Cluj-Napoca, RO;
2011-03-17
- 2011-03-19; in: "QIEM",
U.T. Press,
1, Cluj - Napoca
(2011),
ISBN: 978-973-662-614-2;
67
- 70.
-
M.N. Durakbasa, G. Bas, D. Riepl, J.M. Bauer:
"An Innovative Educational Concept of Teleworking in the High Precision Metrology Laboratory to Develop a Model of Implementation in the Advanced Manufacturing Industry";
Talk: 2015 12th International Conference on Remote Engineering and Virtual Instrumentation (REV),
Bangkok, Thailand;
2015-02-25
- 2015-02-28; in: "IEEE Conference Publications",
IEEE,
(2015),
ISBN: 978-1-4799-7838-0;
Paper ID DOI: 10.1109/REV.2015.7087288,
7 pages.
More information
-
M.N. Durakbasa, J.M. Bauer, G. Bas:
"A Sophisticated Approach to Advanced Production Engineering - Integrated Management for Sustainable Development";
Keynote Lecture: Proceedings of ICPR-AEM and QIEM 2014 Conference,
Cluj-Napoca, Rumänien (invited);
2014-07-01
- 2014-07-05; in: "2014 INTERNATIONAL CONFERENCE ON PRODUCTION RESEARCH - REGIONAL CONFERENCE AFRICA, EUROPE AND THE MIDDLE EAST and 3rd INTERNATIONAL CONFERENCE ON QUALITY AND INNOVATION IN ENGINEERING AND MANAGEMENT",
Technical University of Cluj- Napoca
(2014),
ISBN: 978-973-662-978-5;
5 pages.
More information
-
M.N. Durakbasa, J.M. Bauer, G. Bas:
"Developments in High Precision Metrology for Advanced Manufacturing";
Keynote Lecture: Manufacturing Engineering and Management,
Presov, Slovak Republic (invited);
2012-12-05
- 2012-12-07; in: "Proceedings of 2nd International Conference on MANUFACTURING ENGINEERING & MANAGEMENT 2012",
S. Hloch et al. (ed.);
FVT TU in Kosice with a seat in Presov, STEVEPRESS, Ltd.,
Presov, Slovak Republic
(2012),
978‐80‐553‐1216‐3;
210
- 215.
More information
-
M.N. Durakbasa, J.M. Bauer, G. Bas, G. Poszvek:
"Novel Trends In The Development Of Micro- And Nano- Manufacturing Based On Integrated Management Systems";
Keynote Lecture: The Third International Conference "MECHANICAL ENGINEERING IN XXI CENTURY",
Nis, Serbia (invited);
2015-09-17
- 2015-09-18; in: "Mechanical Engineering in XXI Century",
V. Nikolic, D. Milcic (ed.);
Unigraf,
(2015),
327
- 330.
-
M.N. Durakbasa, J.M. Bauer, L. Kräuter, G. Bas:
"Novel Developments In Advanced Manufacturing And Multi Functional Intelligent Factories (mfif) Towards Production In The Future - Challenges Of Autonomation In Industry 4.0";
Keynote Lecture: 2016 INTERNATIONAL CONFERENCE ON PRODUCTION RESEARCH REGIONAL CONFERENCE AFRICA, EUROPE AND THE MIDDLE EAST and 4th INTERNATIONAL CONFERENCE ON QUALITY AND INNOVATION IN ENGINEERING AND MANAGEMENT,
Cluj Napoca, Rumänien (invited);
2016-07-25
- 2016-07-30; in: "PROCEEDINGS Capturing Dynamics of Production Networks: Combining Agility, Innovation and Quality",
D. Popescu et al. (ed.);
Technical University Of Cluj-Napoca,
1 / Cluj-Napoca, Romania
(2016),
ISBN: 978-606-737-180-2;
388
- 394.
-
M.N. Durakbasa, E. Beken:
"A Proposed Implementation Process For Total-Quality-Management With Integration Of Sustainability Elements Of The International Standards Iso 14001 And Iso 50001";
Talk: Proceedings of ICPR-AEM and QIEM 2014 Conference,
Cluj-Napoca, Rumänien;
2014-07-01
- 2014-07-05; in: "2014 INTERNATIONAL CONFERENCE ON PRODUCTION RESEARCH - REGIONAL CONFERENCE AFRICA, EUROPE AND THE MIDDLE EAST and 3rd INTERNATIONAL CONFERENCE ON QUALITY AND INNOVATION IN ENGINEERING AND MANAGEMENT",
Technical University of Cluj- Napoca
(2014),
ISBN: 978-973-662-978-5;
6 pages.
More information
-
M.N. Durakbasa, I. Bogrekci, P. Demircioglu, G. Bas, A. Günay:
"Characterization Of The Surface Roughness By Precision Measurements And Image Processing On Machined Metal Surfaces Of Milling Cutters";
Talk: Metrology in Production Engineering,
Warschau - Pultusk, PL;
2011-09-12
- 2011-09-14; in: "Metrology in Production Engineering",
(2011),
52
- 57.
-
M.N. Durakbasa, I. Cavusoglu:
"Product and Process Improvement for Automative Suppliers in the Modern Quality Management Systems";
Talk: Proceedings 11th International Symposium on QFD,
Kusadasi;
2005-09-26
- 2005-09-30; in: "Proceedings 11th International Symposium on Quality Function Deployment",
(2005),
129
- 139.
-
M.N. Durakbasa, I. Cavusoglu, P.H. Osanna:
"Six Sigma: Quality Approaches in the Defect-free Production systems - Altı Sigma: Üretim Proseslerinde Neredeyse Hatasız Üretimin Gerçekleştirildiği Kalite Girişimleri";
Talk: II Ulusal Kalite Fonksiyon Göcerimi Sempozyumu,
Izmir;
2008-03-18
- 2008-03-20; in: "Kalite Fonksiyon Göcerimi - Quality Function Deployment",
(2008),
10 pages.
-
M.N. Durakbasa, P. Demircioglu, G. Bas:
"High-Accuracy Measurement And Evaluation Of The Surface Structures Machined In Micro/nano Scale By Tactile And 3d Optical Systems";
Keynote Lecture: 10th International Scientific Conference "Coordinate Measuring Technique CMT",
Bielsko Biala (invited);
2012-04-23
- 2012-04-25; in: "10th International Scientific Conference "Coordinate Measuring Technique CMT"",
Bielsko Biala,
1
(2012),
12 pages.
-
M.N. Durakbasa, P. Demircioglu, G. Bas, W. Pirker:
"Micro-examination of Dental Samples to Enable the Quality Characteristics Required by the Clinical Experience using Biomedical Metrology";
Talk: XXVI. microCAD International Scientific Conference,
Miskolc, Hungary;
2012-03-29
- 2012-03-30; in: "The Publications of the XXVI. microCAD",
(2012),
ISBN: 978-963-661-773-8;
7 pages.
More information
-
M.N. Durakbasa, P. Demircioglu, M. Cakmakci, A. Hornikova:
"Nanometrology, Evaluation Techniques and Quality Control for High Accuracy Surface Measurement";
Talk: 6th Nanoscience and Nanotechnology Conference,
Izmir;
2010-06-15
- 2010-06-18; in: "Nano Tr - Vi",
Izmir Institute of Technology - IZTECH,
(2010),
154.
-
M.N. Durakbasa, G. Kahsay, P.H. Osanna:
"Analysis of Conventionally Machined Surfaces Using Contact Stylus and Optical Measurement Systems";
Talk: Proceedings ICPM 2007 - IV. International Congress on Precision Machining,
Kielce, PL;
2007-09-25
- 2007-09-27; in: "ICPM 2007",
S. Adamczak et al. (ed.);
Kielce University of Technology,
(2007),
ISBN: 978-83-88906-91-6;
119
- 123.
-
M.N. Durakbasa, L. Mukhametzianova, G. Bas, E. Güclü:
"The Role of MMS in an Integrated Management for Improving Production Efficiency and Quality. M.N. Durakbasa";
Talk: International Business Information Management Association Conference (IBIMA),
Wien;
2013-06-27
- 2013-06-28; in: "Vision 2020: Innovation, Development Sustainability, and Economic Growth, Proceedings of the 21st International Business Information Management Association Conference (IBIMA)",
(2013),
ISBN: 978-0-9860419-0-7;
Paper ID 1385-1393,
9 pages.
More information
-
M.N. Durakbasa, N. Nomak Akdogan:
"Ölcme Belirsizliginin Süreclere olan Etkileri ve Ölcme Belirsizliginin Degerlendirilmesi (Influences and Evaluation of Measurement Uncertainty on Manufacturing Processes)";
Talk: VI. Ulusal Ölcümbilim Kongresi,
Eskisehir, TR;
2005-11-17
- 2005-11-18; in: "VI. ÖLCÜMBILIM KONGRESI",
MMO,
E/2005/394
(2005),
ISBN: 975-395-976-1;
111
- 115.
-
M.N. Durakbasa, P.H. Osanna:
"Intelligent supervision of coordinate measuring machines and the estimation of the uncertainty of measurements with CMMS on the basis of ISO standards";
Keynote Lecture: VIIth International Scientific Conference Coordinate Measuring Technique,
Bielsko Biala, PL;
2006-04-03
- 2006-04-05; in: "COORDINATE MEASURING TECHNIQUE",
e. Tokarz et al. (ed.);
Prasa Beskidzka,
7/22/Bielsko Biala
(2006),
ISSN: 1644-0269;
45
- 54.
-
M.N. Durakbasa, P.H. Osanna:
"Intelligent Tolerancing And Advanced Metrology To Support Total Quality Management And Modern Industrial Fabrication";
Keynote Lecture: The Sixth International Working Conference,
Belgrade, Serbia (invited);
2011-06-06
- 2011-06-10; in: "Total Quality Management - Advanced and Intelligent Approaches",
V. Majstorovic (ed.);
COBISS.SR-ID 183755276,
Belgrade, SERBIA
(2011),
ISBN: 978-86-7083-727-0;
29
- 33.
-
M.N. Durakbasa, P.H. Osanna, A. Afjehi-Sadat et al.:
"Surface Assessment Related to Biomedicine - Possibilities, Opportunities and Future Developments";
Talk: 9th International Conference on Metrology and Properties of Engineering Surfaces,
Halmstad;
2004-09-10
- 2004-09-11; in: "Metrology and Properties of Engineering Surfaces",
Halmstad University,
(2004),
ISBN: 91-631-5455-2;
271 pages.
-
M.N. Durakbasa, P.H. Osanna, P. Aksoy, A. Bauer, L. Kräuter:
"Comparision of Contact and Optical Non-Contact Methods for the Analysis and Characterization of Surfaces of Precise Workpieces";
Talk: VIIIth International Science Conference Coordinate Measuring Technique,
Bielsko-Biala - Ustron / PL;
2008-03-31
- 2008-04-02; in: "Coordinate Measuring Technique Problems and Implementations",
(2008),
ISBN: 978-83-60714-40-9;
303
- 314.
-
M.N. Durakbasa, P.H. Osanna, P. Aksoy, L. Kräuter:
"Contact and Non-contact Measurement and Analysis of the Surface of High Precision Workpieces";
Talk: 12th International Conference on Metrology and Properties of Engineering Surfaces,
Rzeszow;
2009-07-08
- 2009-07-10; in: "Metrology and Properties of Engineering Surfaces",
P. Pawlus et al. (ed.);
Rzeszow University of Technology,
(2009),
ISBN: 978-83-7199-545-3;
111
- 116.
-
M.N. Durakbasa, P.H. Osanna, G. Bas:
"Advanced Management Systems for Quality, Energy and Environment for Efficiency Enhancement of Modern Manufacturing Industries";
Keynote Lecture: International Convention On Quality 2012 With The Motto Quality For European And World Integrations,
Belgrade (invited);
2012-06-05
- 2012-06-07; in: "International Convention On Quality 2012",
V. Majstorovic (ed.);
UASQ United Association of Serbia for Quality,
1
(2012),
ISBN: 978-86903197-9-4;
Paper ID rad03,
8 pages.
-
M.N. Durakbasa, P.H. Osanna, L. Crisan, J.M. Bauer, L. Kräuter:
"Intelligent Tolerancing and Coordinate Metrology as Basis for Competetive Global and Accurate Economic Industrial Manufacturing";
Talk: 5. KOBI'ler ve Verimlilik Kongresi - 5th Congress on SMEs and Efficiency,
Istanbul;
2008-11-25
- 2008-11-26; in: "Global Dynamics and SMEs",
(2008).
-
M.N. Durakbasa, P.H. Osanna, L. Crisan, L. Kräuter:
"Competetive Global And Accurate Economic Industrial Production On Basis Of Intelligent Tolerancing And Coordinate Metrology";
Talk: XXIII. microCAD International Scientific Conference,
Miskolc, Ungarn;
2009-03-19
- 2009-03-20; in: "Production Engineering and Manufacturing Systems",
ITTC Innovation and Technology Transfer Centre,
ME.Tu-116
(2009),
ISBN: 978-963-661-878-0;
263
- 268.
-
M.N. Durakbasa, P.H. Osanna, P. Demircioglu:
"The Factors Affecting Surface Roughness Measurements of the Machined Flat and Spherical Surface Structures - The Geometry and the Precision of the Surface";
Talk: ISMQC - International Symposium on Measurement and Quality Control,
Osaka - Japan;
2010-09-05
- 2010-09-09; in: "ISMQC 2010",
Osaka University,
(2010),
ISBN: 978-49905119-1-3;
1
- 4.
-
M.N. Durakbasa, P.H. Osanna, P. Demircioglu, I. Bogrekci:
"Parameters and measurands in precision nanometrology";
Talk: 10th International Symposium on Measurement Technology and Intelligent Instruments,
KAIST, Daejeon, Korea;
2011-06-29
- 2011-07-02; in: "ISMTII 2011",
Vol. X , No. X, A5-5
(2011),
1
- 6.
-
M.N. Durakbasa, P.H. Osanna, P. Demircioglu, L. Crisan:
"Surface Measurement And Evaluation Methods Of High Precision Technical Structures";
Talk: XXIV. microCAD International Scientific Conference,
Miskolc;
2010-03-18
- 2010-03-20; in: "microCAD",
ITTC Innovation and Technology Transfer Centre,
N
(2010),
ISBN: 978-963-661-918-3;
193
- 198.
-
M.N. Durakbasa, P.H. Osanna, A. Hornikova, M. Cakmakci, G. Bas, P. Demircioglu:
"Production Engineering On The Basis Of Precision Metrology And Intelligent Tolerancing";
Keynote Lecture: Metrology in Production Engineering,
Warschau - Pultusk, PL (invited);
2011-09-12
- 2011-09-14; in: "Metrology in Production Engineering",
(2011),
46
- 51.
-
M.N. Durakbasa, P.H. Osanna, L. Kräuter:
"Development Tendencies in Precision Engineering and Industrial Nanometrology";
Keynote Lecture: International Journal - Yusq-United Association Of Serbia For Quality,
Belgrad;
2010-05-31
- 2010-06-03; in: "Total Quality Management & Excellence",
V. Majstorovic (ed.);
UASQ - United Association of Serbia for Quality,
38, UDK 658.5, Belgrade, Serbia
(2010),
ISSN: 1452-0680;
7
- 12.
-
M.N. Durakbasa, P.H. Osanna, L. Kräuter:
"Modern Industrial Manufacturing And Fabrication To Achieve High Accuracy And High Economy";
Talk: Xxxii Conference On Production Engineering,
Novi Sad;
2008-09-18
- 2008-09-20; in: "Proceedings 32. Conference on Production Engineering of Serbia with International Participants",
Faculty of Technical Sciences,
(2008),
ISBN: 978-86-7892-131-5;
591
- 594.
-
M.N. Durakbasa, P.H. Osanna, L. Kräuter:
"Research and Education in Engineering and Business with Special Consideration on Geometrical Product Specifications and Verification - GPS";
Keynote Lecture: Proceedings of Balkan Region Conference on Engineering and Business Education & International Conference on Engineering and Business Education,
Sibiu, Romania (invited);
2009-10-15
- 2009-10-17; in: "Balkan Region Conference on Engineering and Business Education & International Conference on Engineering and Business Education",
C. Oprean, N. Grünwald, C. Kifor (ed.);
Lucian Blaga University of Sibiu,
I/Sibiu
(2009),
ISBN: 978-973-739-848-2;
14
- 18.
-
M.N. Durakbasa, P.H. Osanna, L. Kräuter, J.M. Bauer:
"The Improvement of Product and Process Quality in the Industry of the 21st Century, by Application of Nanotechnology for Every-Day-Life and for Bio-Medicine";
Talk: 7mo. Simposio INTERNACIONAL,
La Habana, Cuba;
2008-05-27
- 2008-05-29; in: "Metrologia 2008",
(2008),
978-959-282-073-7.
-
M.N. Durakbasa, P.H. Osanna, N. Nomak Akdogan:
"Supervision And Confirmation Of Complex Measurement Systems By Using Of Intelligent Technologies";
Talk: XVII IMEKO WORLD CONGRESS Metrology in the 3rd Millenium,
Cavtat;
2003-06-22
- 2003-06-27; in: "Metrology in the 3rd Millennium",
(2003),
Paper ID TC14 -005,
4 pages.
-
M.N. Durakbasa, P.H. Osanna, N. Nomak Akdogan, J.M. Bauer, L. Kräuter:
"The Influence of Ecology and TQM in European Industrial Production under the Pre-supposition of Intelligent flexible Dissassembly and Recycling of Used Products";
Keynote Lecture: 5th International IFAC Wokshop DECOM-TT 2007,
Izmir, TR;
2007-05-17
- 2007-05-20; in: "A Proceedings Volume from the 5th IFAC Workshop DECOM-TT 2007",
G. Dimirovski (ed.);
DEU Press and TOK,
Izmir
(2007),
ISBN: 978-975-01864-1-7;
257
- 260.
-
M.N. Durakbasa, P.H. Osanna, B. Sagbas, A. Hornikova:
"High Precision Production Metrology for Quality Improvement in Biomedical Applications";
Talk: 8th International Conference on Measurement,
Smolenice, Slovakia;
2011-04-27
- 2011-04-30; in: "Measurement 2011",
VEDA,
Bratislava, Slovakia
(2011),
ISBN: 978-80-969-672-4-7;
135
- 140.
-
M.N. Durakbasa, P.H. Osanna, K.J. Stout:
"Alternative Ideas for Quality Assurance Based on Function Dependence";
Talk: Proceedings KOBI' 07,
Istanbul, TR;
2007-12-07
- 2007-12-08; in: "4th Congress of the SMEs and Efficiencies - 4. KOBI'ler ve Verimlilik Kongresi",
G. Gencyilmaz et al. (ed.);
Golden Media,
70
(2007),
ISBN: 978-975-6957-71-4;
623
- 629.
-
M.N. Durakbasa, P.H. Osanna, M.E. Yurci, P. Aksoy:
"Contact And Contactless Investigations Of Manufactured High-Precise Surface Structures";
Talk: IMEKO XIX World Congress,
Lisbon;
2009-09-06
- 2009-09-11; in: "Fundamental and Applied Metrology",
(2009),
ISBN: 978-963-88410-0-1;
Paper ID 680,
4 pages.
-
M.N. Durakbasa, P.H. Osanna, M.E. Yurci, N. Nomak Akdogan:
"High Precision Measurement and Evaluation of the Fine Mould Surface Structures";
Talk: PROCEEDINGS OF ISMTII 2007,
Sendai, Japan;
2007-09-24
- 2007-09-27; in: "ISMTII 2007",
TOHOKU UNIV SENDAI,
(2007),
371
- 374.
-
M.N. Durakbasa, P.H. Osanna, M.E. Yurci, N. Nomak Akdogan:
"Surface Treatment, Modification, Precision Measurement and Raughness Evaluation of Fine Moulded Surface Structures";
Talk: Proceedings of the 12th International Conference on Tools,
Miskolc, Hungary;
2007-09-06
- 2007-09-08; in: "International Conference of Tools - ICT 2007",
I. Dudas et al. (ed.);
(2007),
ISSN: 1215-0851;
21
- 26.
-
M.N. Durakbasa, W. Pirker, P.H. Osanna, P. Demircioglu, G. Bas, B. Gültekin:
"Application Of Advanced Production Metrology For Quality Improvements In Biomedical Engineering - Analysis And Evaluation Of Surface Structures Of Dental Implants";
Talk: 14 Joint International IMEKO TC1+TC7 TC13 th + Symposium,
Jena, Germany;
2011-08-31
- 2011-09-02; in: "Intelligent Quality Measurements - Theory, Education and Training",
(2011),
Paper ID urn:nbn:de:gbv:ilm1-2011imeko-085:3,
5 pages.
-
M.N. Durakbasa, G. Poszvek, G. Bas, J.M. Bauer:
"Developments In Precision Engineering: High Precision Metrology Applications To Improve Efficiency And Quality";
Talk: XXI IMEKO World Congress,
Prague;
2015-08-30
- 2015-09-04; in: "XXI IMEKOO World Congress - Full Papers",
1
(2015),
ISBN: 978-80-01-05793-3;
4 pages.
More information
-
M.N. Durakbasa, K.J. Stout, P.H. Osanna, M.E. Yurci:
"Function Dependent Quality Assurance in Modern Production Engineering";
Keynote Lecture: TSO 07 Proceedings,
Presov;
2007-11-21
- 2007-11-23; in: "TSO Technology System Opretaion 2007",
S. Hloch, Z. Urbanova, J. Dobransky, I. Orlovsky (ed.);
FVT TU,
Kosice
(2007),
ISBN: 978-80-8073-900-3;
7
- 10.
-
M.N. Durakbasa, A. Weckenmann, G. Bas:
"An Integrated and Systematic Method of Metrology for Efficiency, Quality and Functionality Improvement in Precision Manufacturing";
Talk: 8th International Conference and Exhibition on Design and Production of Machines and Dies/Molds,
Aydin TR (invited);
2015-06-18
- 2015-06-21; in: "Diemold 2015",
M. Akkök, E. Budak, M. Firat, B. Kaftanoglu (ed.);
Mechanical Design and Production Society (MATIM),
(2015),
Paper ID MF 3 (DM 39),
8 pages.
More information
-
M.N. Durakbasa, M.E. Yurci, P.H. Osanna, N. Nomak Akdogan:
"The Structure of Fine Mould Surfaces and Their Accurate Mesurement and Evaluation";
Talk: Annals of MTeM for 2007 and Proceedings of the 8th Internatinal Conference in Manufacturing,
Cluj-Napoca, RO;
2007-10-04
- 2007-10-05; in: "MTeM 2007",
C. Gyenge (ed.);
(2007),
ISBN: 973-9087-83-3;
481
- 483.
-
C. Einspieler, F. Bleicher:
"Unsicherheitsbeiträge zur Signalerfassung der Prozess-Verschleissbestimmung beim Tiefbohren";
Talk: 8. VDI-Fachtagung Messunsicherheit,
Erfurt (invited);
2007-11-15
- 2007-11-16; in: "VDI-Bericht 2319",
(2007),
ISBN: 978-3-18-092319-2;
181
- 196.
-
C. Einspieler, F. Bleicher:
"Unsicherheitsbeiträge zur Signalerfassung der Prozess-Verschleissbestimmung beim Tiefbohren";
Talk: VDI-Fachtagung Messunsicherheit 2017,
Erfurt (invited);
2017-11-15
- 2017-11-16; in: "VDI-Bericht 2319",
(2017),
ISBN: 978-3-18-092319-2;
181
- 196.
-
M. Erol, M. Yurddaskal, S. Yildirim, O. Mermer, G. Bas, M. Cakmakci, M.N. Durakbasa, E. Celik:
"Nanometric measurement of the pre nano scale tio2 powders via flame spray pyrolysis: synthesis, properties and photocatalytical decomposition of methylen blue";
Talk: IMEKO XX World Congress International Measurement Confederation,
Busan, Korea;
2012-09-09
- 2012-09-14; in: "IMEKO XX World Congress International Measurement Confederatio",
(2012),
ISBN: 978-89-950000-5-2;
6 pages.
More information
-
D. Finkeldei, F. Bleicher:
"Investigation Of Coolants In Machining Of Titanium Aluminides";
Poster: 26th DAAAM International Symposium 2015,
Zadar (invited);
2015-10-21
- 2015-10-24; in: "26th Daaam International Symposium On Intelligent Manufacturing And Automation",
B. Katalinic (ed.);
(2016),
ISBN: 978-3-902734-07-5;
825
- 833.
-
D. Finkeldei, J. Brier, F. Bleicher:
"Investigation of tool geometry and cutting speed in machining of difficult to cut materials";
Talk: WPK 2018,
Wien; Hofburg (invited);
2018-09-26
- 2018-09-27; in: "Efficiency, Flexibility, Integration",
F. Bleicher (ed.);
4
(2018),
ISBN: 978-3-7003-2086-9;
131
- 140.
-
D. Finkeldei, M. Sexauer, F. Bleicher:
"End milling of Inconel 718 using solid Si3N4 ceramic cutting tools";
Talk: 52nd CIRP sponsored Conference on Manufacturing Systems (CMS) 2019,
Ljubljana (invited);
2019-06-12
- 2019-06-14; in: "Procedia CIRP",
Elsevier,
Volume 81
(2019),
ISSN: 2212-8271;
1131
- 1135.
-
A. Fritsche, F. Bleicher:
"Analysis of the thermal impact on gamma titanium aluminide by grinding with internal coolant supply based on experimental investigation and transient thermal investigation";
Talk: 15th CIRP Conference on Modelling of Machining Operations - CMMO,
Karlsruhe (invited);
2015-06-11
- 2015-06-12; in: "Procedia Cirp",
elsevier,
31
(2015),
ISSN: 2212-8271;
154
- 159.
-
A. Fritsche, F. Bleicher:
"Comparison of two state of the art grinding cooling technologies";
Poster: 31st Danubia-Adria Symposium on Advances in Experimental Mechanics,
Kempten (invited);
2014-09-24
- 2014-09-27; in: "31st Danubia-Adria Symposium on Advances in Experimental Mechanics",
VDI Verein Deutscher Ingenieure e.V.,
Düsseldorf
(2014),
ISBN: 978-3-00-046740-0;
50
- 51.
-
A. Fritsche, F. Bleicher:
"Evaluating and Influencing Dressing Results by Changing the Grain Size Distribution on Statistical Experimental Investigations";
Talk: GCSM - 12th Global Conference on Sustainable Manufacturing 2014,
Johor Bahru, Malaysia (invited);
2014-09-22
- 2014-09-24; in: "GCSM - 12th Global Conference on Sustainable Manufacturing 2014",
GCSM - 12th Global Conference on Sustainable Manufacturing 2014,
(2014),
ISSN: 2212-8271;
718
- 723.
-
T. Frühwirth, F. Pauker, A. Fernbach, I. Ayatollahi, W. Kastner, B. Kittl:
"Guarded state machines in OPC UA";
Talk: 41st Annual Conference of the IEEE Industrial Electronics Society (IECON 2015),
Yokohama, Japan;
2015-11-09
- 2015-11-12; in: "Proceedings of the 41st Annual Conference of the IEEE Industrial Electronics Society (IECON)",
(2015),
6 pages.
More information
-
M. Fuchs, Ch. Habersohn, Y. Kalkan, C. Lechner, F. Bleicher:
"Metrological Investigation of an actuator device for vibration-assisted turning";
Poster: 31st Danubia-Adria Symposium on Advances in Experimental Mechanics,
Kempten (invited);
2014-09-24
- 2014-09-27; in: "31st Danubia-Adria Symposium on Advances in Experimental Mechanics",
VDI Verein Deutscher Ingenieure e.V., Düsseldorf,
(2014),
ISBN: 978-3-00-046740-0;
98
- 99.
-
R Fürbacher, G. Liedl:
"Investigations on the wetting and deicing behavior of laser treated hydrophobic steel surfaces";
Keynote Lecture: Laser-based Micro- and Nanoprocessing,
online only (invited);
2021-03-05; in: "Proceedings SPIE",
SPIE,
11674
(2021),
Paper ID 1167417,
10 pages.
More information
-
B. Geringer, J. Graf, D. Klawatsch, H.-P. Lenz, G. Liedl, D. Schuöcker, W.F. Piock, M. Jetzinger, P. Kapus:
"Direkteinspritzender Ottomotor und Laserzündung";
Talk: 5. Dresdner Motorenkolloquium,
Dresden (invited);
2003-06-05
- 2003-06-06; in: "5. Dresdner Motorenkolloquium ",
(2003),
ISSN: 1433-4135;
15
- 23.
More information
-
B. Geringer, J. Graf, D. Klawatsch, H.-P. Lenz, G. Liedl, D. Schuöcker, W.F. Piock, M. Jetzinger, P. Kapus:
"Laserinduzierte Zündung an einem Otto-DI-Brennverfahren der zweiten Generation";
Talk: 24. Internationales Wiener Motorensymposium,
Wien (invited);
2003-05-15
- 2003-05-16; in: "24. Internationales Wiener Motorensymposium 15.- 16. Mai 2003",
H.-P. Lenz (ed.);
VDI Verlag GmbH,
Düsseldorf
(2003),
ISBN: 3-18-353912-8;
87
- 109.
More information
-
S. Gössinger, C. Bauer, C. Lechner:
"Using machine hammer peening to realize defined surface structure in order to reduce friction in turbulent fluid flows - part 2";
Talk: 18th International Seminar on Hydropower Plants,
Laxenburg;
2014-11-26
- 2014-11-28; in: "18. International Seminar on Hydropower Plants - Innovations and Development Needs for Sustainable Growth of Hydropower",
(2014),
ISBN: 978-3-9501937-9-4;
751
- 764.
-
S. Gössinger, C. Bauer, C. Lechner, F. Bleicher:
"Using Machine Hammer Peening to Realize Defined Surface Structures in Order to Reduce Friction in Turbulent Fluid Flows";
Talk: 17th International Conference on Hydropower Plants,
Laxenburg;
2012-11-21
- 2012-11-23; in: "Pumped storage in the context of renewable energy supply",
(2012),
ISBN: 978-3-9501937-8-7;
379
- 388.
-
S. Gössinger, P. Unterberger, F. Bleicher:
"High Performance Flywheel Technology for Electric Energy Storage using Magnetic Bearings";
Poster: 34th Danubia-Adria Symposium on Advances in Experimental Mechanics,
University of Trieste, Italy (invited);
2017-09-19
- 2017-09-22; in: "DAS2017",
(2017),
ISBN: 978-88-8303-863-1.
-
R. Gómez Vázquez, H. Koch, A. Otto:
"Multi-physical Simulation of Laser Welding";
Talk: LANE 2014,
Fürth (Deutschland);
2014-09-08
- 2014-09-11; in: "8th International Conference on Laser Assisted Net Shape Engineering LANE 2014",
Physics Procedia / Elsevier,
Volume 56
(2014),
ISSN: 1875-3892;
9 pages.
More information
-
R. Gómez Vázquez, A. Otto, G. Liedl, R. Feichtenschlager:
"Simulation of Laser Welding of Dissimilar Metals";
Talk: Lasers in Manufacturing 2015,
München;
2015-06-22
- 2015-06-25; in: "Lasers in Manufacturing 2015",
(2015),
8 pages.
More information
-
R. Gómez Vázquez, A. Otto, G. Liedl, R. Feichtenschlager, C. Stiglbrunner:
"Simulation of laser welding aluminum-to-steel";
Keynote Lecture: 11th International Seminar "Numerical Analysis of Weldability",
Graz - Castle Seggau;
2015-09-27
- 2015-09-30; in: "Mathematical Modelling of Weld Phenomena 11",
Verlag der Technischen Universität Graz,
11
(2016),
ISBN: 978-3-85125-490-7;
99
- 108.
More information
-
R. Gómez Vázquez, A. Otto, J. Peternel:
"Recent Advances in the Multiphysical Simulation of Laser Assisted Manufacturing Processes";
Talk: LiM - Lasers in Manufacturing 2017,
München (invited);
2017-06-26
- 2017-06-29; in: "Proceedings of the LiM 2017",
(2017),
Paper ID 181,
12 pages.
More information
-
M. Gronalt, B. Katalinic, M. Schmid:
"Engpaßanalyse eines flexiblen Fertigungssystems mit Hilfe von Computersimulation";
Talk: 2nd International Symposium Danubia-Adria Association for Automation and Metrology,
Strbske Pleso, Slovakia;
1991-12-09
- 1991-12-11; in: "Proc. of 2nd International Symposium Danubia-Adria Association for Automation and Metrology",
House of Technology, Bratislava,
(1991),
ISBN: 80-233-0225-6;
118
- 119.
-
A. Günay Bulutsuz, M.E. Yurci, M.N. Durakbasa:
"Investigation Cmm Measurement Parameters Effect To The Measurement Error";
Talk: XXI IMEKO World Congress,
Prague;
2015-08-30
- 2015-09-04; in: "XXI Imeko World Congress - Full Papers",
Issue 1
(2015),
ISBN: 978-80-01-05793-3;
Paper ID IMEKO-WC-2015-TC14-290,
5 pages.
More information
-
A. Gunay Bulutsuz, S. Fank, T. Gulmez, M.N. Durakbasa:
"Calculation of measurement uncertainty for plastic (abs) material in flexural testing";
Poster: IMEKO XX World Congress International Measurement Confederation,
Busan, Korea;
2012-09-09
- 2012-09-14; in: "Proceedings of XX IMEKO World Congress International Measurement Confederation",
(2012),
ISBN: 978-89-950000-5-2;
4 pages.
More information
-
Ch. Habersohn, F. Puschitz, F. Bleicher:
"Development Of A Virtual Model For An Over-Determined Parallel Kinematics Structure";
Poster: 27th Symposium on advances in experimental machanics,
Wroclaw;
2010-09-22
- 2010-09-25; in: "27th Symposium on advances in experimental machanics",
(2010),
ISBN: 978-83-87982-59-1;
69
- 70.
-
M. Hacksteiner, F. Dür, D. Finkeldei, M. Obermair, F. Bleicher:
"Monitoring of process power and energy during machining";
Talk: 13th International Conference on High Speed Machining - Progress in Productivity and Quality,
Metz (invited);
2016-10-04
- 2016-10-05; in: "Thirteenth International Conference on HIGH SPEED MACHINING 2016",
(2016).
-
M. Hacksteiner, G. Fuchs, F. Bleicher:
"Strategic Energy Management In Mechanical Series Production";
Talk: 16th Global Conference on Sustainable Manufacturing to be held,
Lexington; Kentucky (invited);
2018-10-02
- 2018-10-04; in: "Procedia Manufacturing",
Elsevier,
(2018).
-
M. Hacksteiner, H. Peherstorfer, F. Bleicher:
"Energy efficiency of state-of-the-art grinding processes";
Talk: 15th Global Conference on Sustainable Manufacturing,
Haifa, Israel (invited);
2017-09-25
- 2017-09-27; in: "Cirp Gcsm 17",
Elsevier,
(2017),
ISSN: 2351-9789.
-
E. Hajrizi, S Shabani, B. Katalinic:
"Computer Based Optimal Design of Asynchronous Devices";
Talk: 8th International DAAAm Symposium,
Dubrovnik;
1997-10-23
- 1997-10-25; in: "Proceedings of 8th International DAAAm Symposium",
(1997),
107
- 108.
-
B. Heinzl, I. Hafner, P. Smolek, I. Leobner, G. Gourlis, M. Obermair, N. Popper, W. Kastner:
"Towards a Common Description of Interdisciplinary Aspects Relevant for Holistic Energy Analysis of Production Facilities";
Talk: Workshop der ASIM/GI-Fachgruppen STS/GMMS,
Fachhochschule Stralsund, Deutschland;
2015-06-18
- 2015-06-19; in: "Workshop der ASIM/GI-Fachgruppen STS/GMMS",
(2015),
2 pages.
More information
-
B. Heinzl, W. Kastner, I. Leobner, F. Dür, F. Bleicher, I. Kovacic:
"Using coupled simulation for planning of energy efficient production facilities";
Talk: Workshop on Modeling and Simulation of Cyber-Physical Energy Systems (MSCPES),
Berlin, Germany;
2014-04-14; in: "Proceedings Workshop on Modeling and Simulation of Cyber-Physical Energy Systems (MSCPES)",
(2014),
21
- 26.
More information
-
B. Heinzl, W. Kastner, M. Rößler, F. Bleicher, F. Dür, I. Kovacic, I. Leobner, N. Popper:
"Interdisziplinäre Optimierung der Energieeffizienz in Fertigungsbetrieben mittels Co-Simulation";
Talk: ASIM-Workshop der STS/GMMS 2014,
Robert Bosch Zentrum für Leistungselektronik, Reutlingen-Rommelsbach;
2014-02-20
- 2014-02-21; in: "ASIM-Workshop der STS/GMMS 2014",
J. Scheible, I. Bausch-Gall, C. Deatcu (ed.);
ARGESIM Verlag Wien,
1/1/Wien
(2014),
ISBN: 978-3-901608-43-8;
Paper ID 38,
4 pages.
More information
-
B. Heinzl, M. Landsiedl, N. Popper, A. Dimitriou, F. Dür, F. Bleicher, C. Reinisch, F. Breitenecker:
"Object-oriented Multi-domain Modelling of Machine Tools: A Case Study";
Talk: European Modeling and Simulation Symposium,
Wien;
2012-09-19
- 2012-09-21; in: "Proceedings of the European Modeling and Simulation Symposium, 2012",
(2012),
ISBN: 978-88-97999-01-0;
471
- 476.
More information
-
B. Heinzl, M. Rößler, N. Popper, M. Landsiedl, C. Dorn, S. Brandstetter, F. Bleicher, A. Dimitriou:
"Studies on Multi-Domain Modelling and Thermal Coupling of a Machine Tool";
Talk: ASIM 2011,
Winterthur, Schweiz;
2011-09-07
- 2011-09-09; in: "Tagungsband Abstracts und Fullpapers",
ZHAW School of Engineering,
(2011),
ISBN: 978-3-905745-44-3.
More information
-
B. Heinzl, M. Rößler, N. Popper, I. Leobner, K. Ponweiser, W. Kastner, F. Dür, F. Bleicher, F. Breitenecker:
"Interdisciplinary Strategies for Simulation-Based Optimization of Energy Efficiency in Production Facilities";
Talk: Computer Modelling and Simulation (UKSim),
Cambridge, United Kingdom;
2013-04-10
- 2013-04-12; in: "Computer Modelling and Simulation (UKSim)",
(2013),
304
- 309.
More information
-
N. Herzig, F. Bleicher, L. Meyer, T. Halle:
"Zusammenhänge zwischen werkstoffbedingten Skalierungseffekten und der spezifischen Spankraft";
Talk: DFG Schwerpunktsprogramm 1138 Modellierung von Größeneinflüssen bei Fertigungsprozessen,
Chemnitz (invited);
2008-05-08
- 2008-05-09; in: "Modellierung von Größeneinflüssen bei Fertigungsprozessen",
Eigenverlag, Chemnitz,
(2008),
ISSN: 1860-8698.
More information
-
N. Herzig, F. Bleicher, F. Puschitz, C. Dorn et al.:
"Collective Research for High Performance Manufacturing";
Talk: 15th International Working Seminar on Production Economics,
Innsbruck;
2008-03-03
- 2008-03-07; in: "15th International Working Seminar on Production Economic",
(2008),
163
- 172.
More information
-
N. Herzig, L. Meyer, T. Halle, F. Bleicher, F. Puschitz, C. Dorn:
"A material based approach of modeling specific cutting force during machining operations including scaling effects";
Talk: 12th CIRP Conference on Modelling of Machining Operations,
San Sebastian;
2009-05-07
- 2009-05-08; in: "Conference on Modelling of Machining Operations",
Band 1
(2009),
ISBN: 978-84-608-0865-7;
229
- 236.
More information
-
M. Hirschmanner, S. Gross, B. Krenn, F. Neubarth, M. Trappl, M. Zillich, M. Vincze:
"Extension of the Action Verb Corpus for Supervised Learning";
Poster: Austrian Robotics Workshop 2018,
Klagenfurt;
2018-05
- 2018-05-18; in: "Proceedings of the Austrian Robotics Workshop 2018",
(2018),
3 pages.
-
R. Holzer, F. Dür:
"Praktische Potentiale durch Industrie 4.0 in der Produktion am Beispiel energetischer Messungen";
Talk: Zweiter Fachkongress Industrie 4.0,
Wien (invited);
2015-09-15; in: "Zweiter Fachkongress Industrie 4.0",
Web-Tagungsband - www.industrieweb.at,
(2015),
##.
-
A. Hornikova, G. Bas, B. Sagbas, M.N. Durakbasa:
"Contributing With Design Of Experiment Theory To Quality";
Talk: 1st International Conference Quality and Innovation in Engineering and Management,
Cluj-Napoca, RO;
2011-03-17
- 2011-03-19; in: "QIEM",
S. Popescu, S. Brad, D. Popescu (ed.);
U.T. Press,
1, Cluj - Napoca
(2011),
ISBN: 978-973-662-614-2;
95
- 100.
-
A. Hornikova, M.N. Durakbasa:
"Monograph about Data Mining/ Monograph d'Exploration de données";
Talk: CAFMET 2010,
Cairo, EGYPT;
2010-04-18
- 2010-04-23; in: "CAFMET 2010",
CAFMET,
(2010),
Paper ID S6-3 PA-101,
8 pages.
-
A. Hornikova, M.N. Durakbasa, E. Güclü, G. Bas:
"Data Mining - Novel Statistical Method";
Talk: 8th International Conference on Measurement,
Smolenice, Slovakia;
2011-04-27
- 2011-04-30; in: "Measurement 2011",
VEDA,
Bratislava, Slovakia
(2011),
ISBN: 978-80-969-672-4-7;
12
- 15.
-
A. Hornikova, M.N. Durakbasa, P.H. Osanna:
"Biomedical Application of Form Measurement and Coordinate Metrology";
Talk: 2011 IEEE International Symposium on Medical Measurements and Applications (MeMaA 2011),
Bari, ITALY;
2011-05-30
- 2011-05-31; in: "2011 IEEE International Symposium on Medical Measurements and Applications (MeMeA 2011) Proceedings",
IEEE,
CFP11MEA-CDR
(2011),
ISBN: 978-1-4244-9337-1;
5 pages.
-
G. Humenberger, G. Liedl, M. Ferrari, F. Bammer:
"Polarisation measurement of the emitted thermal radiation during laser material processing";
Talk: 29th DAAAM International Symposium,
Zadar;
2018-10-24
- 2018-10-27; in: "Proceedings of the 29th International DAAAM Symposium "Intelligent Manufacturing & Automation"",
B. Katalinic (ed.);
Danube Adria Association for Automation and Manufacturing, DAAAM,
Volume 29/1/Zadar
(2018),
ISSN: 1726-9679;
922
- 930.
More information
-
G. Humenberger, G. Liedl, S. Heidlmayr:
"Measurement of the Emitted Thermal Radiation During CO2-Laser Cutting";
Talk: MOTSP 2014,
Bol, Kroatien;
2014-06-11
- 2014-06-13; in: "MOTSP 2014 Conference Proceedings",
Croatian Association for PLM,
(2014),
ISSN: 1848-9591;
8 pages.
More information
-
G. Jäggle, W. Lepuschitz, C. Girvan, L. Schuster, I. Ayatollahi, M. Vincze:
"Overview and Evaluation of a Workshop Series for Fostering the Interest in Entrepreneurship and STEM";
Talk: ICEED International Conference on Engineering Education,
Malaysia;
2018-11-08
- 2018-11-09; in: "IEEE 10th International Conference on Engineering Education (ICEED)",
(2018),
6 pages.
-
G. Kahsay, P.H. Osanna, M.N. Durakbasa:
"EMPIRICAL INVESTIGATION OF TOTAL QUALITY MANAGEMENT (TQM) IN MEDIUM AND LARGE SCALE MANUFACTURING INDUSTRIES";
Talk: Proceedings 11th International scientific conference - SI 2007,
Bratislava, SK;
2007-11-29
- 2007-11-30; in: "Mechanical Engineering 2007",
(2007),
ISBN: 978-80-227-2768-6;
8 pages.
-
G. Kahsay, P.H. Osanna, M.N. Durakbasa:
"Six Sigma: A Virtually Defect Free Quality Initiative";
Talk: Tagungsband TOP 2007,
Senec, SK;
2007-06-26
- 2007-06-28; in: "TOP 2007",
STU - Publishing House of Slvak University of Technology,
(2007),
ISBN: 978-80-227-2693-1;
143
- 152.
-
M. Kaltenbrunner, G. Liedl, A. Kratky, R. Bielak:
"LAWD - Laser assisted wire drawing";
Talk: LANE 2004,
Erlangen;
2004-09-21
- 2004-09-24; in: "Proceedings of the 4th LANE",
Meisenbach Bamberg,
(2004),
ISBN: 3-87525-202-0;
1175
- 1181.
-
A. Kaplan, M. Bögl, G. Liedl, D. Schuöcker:
"TiC/Al-Metal-Matrix-Composites produced by Laser Surface Treatment";
Talk: Adva´nces in Automotive and Transportation Technology and Practice for the 21th Century,
Wien/Austria;
1999-06-14
- 1999-06-18; in: "ISATA - Materials for Energy Efficient Vehicules",
(1999),
305
- 312.
-
A. Kaplan, G. Liedl et al.:
"Analysis of laser dispersing of TiC-Powder into Aluminium alloys";
Talk: ECLAT,
Hannover;
1998-09-22
- 1999-09-23; in: "Proceedings ECLAT",
(1998),
ISBN: 3-88355-263-1;
215
- 220.
-
J. Karandikar, C. Ramsauer, D. Leitner, T. Schmitz, F. Bleicher:
"Remote Bayesian Updating For Milling Stability";
Talk: American Society for Precision Engineering: ASPE Annual Meeting,
Minneapolis, Minnesota, United States of America (invited);
2021-11-01
- 2021-11-05; in: "Proceedings 36th ASPE Annual Meeting",
(2021),
266
- 270.
-
B. Katalinic:
"20 Basic Characteristics of Doctor of Technical Sciences and Way how to Develop them";
Talk: 23rd International DAAAM Symposium,
Zadar;
2012-10-24
- 2012-10-27; in: "Annals of DAAAM for 2012 & Proceedings of the 23rd International DAAAM Symposium: "Make Harmony between Technology and Nature, and Your Mind will Fly Free as a Bird"",
B. Katalinic (ed.);
Annals of DAAAM for 2012 & Proceeding of the 23rd International DAAAM Symposium/DAAAM International Vienna,
23/1
(2012),
ISSN: 2304-1382;
Paper ID Volume 23, No.1 CDRom Version,
1 pages.
More information
-
B. Katalinic:
"Ablaufplanung für komplexe flexible Fertigungssysteme";
Talk: 4th Symposium "MMA`90",
Novi Sad;
1990-09-25
- 1990-09-27; in: "Proc. 4th Symposium "MMA`90"",
(1990),
381
- 394.
-
B. Katalinic:
"Aktueller Stand und Entwicklungstendenzen von Produktionssystemen";
Talk: 1st International Conference Business System Management,
Mostar;
1997-09-26
- 1997-09-27; in: "Proceedings of 1st International Conference Business System Management",
(1997),
123
- 130.
-
B. Katalinic:
"Analiza, sinteza i optimiranje logistike vodjenja kompleksnih fleksibilnih sustava";
Talk: 10th International Symposium BIAM`90,
Zagreb;
1989-06-30; in: "Proc. 10th International Symposium BIAM`90",
(1989),
#.
-
B. Katalinic:
"Auslegung und Steuerung von flexiblen Montagesystemen";
Talk: 4. Internationales DAAAM Symposium "Automation und Metrologie: Mensch, Technik, Umwelt",
Brno, Tschechien;
1993-09-16
- 1993-09-18; in: "4. Internationales DAAAM Symposium "Automation und Metrologie: Mensch, Technik, Umwelt",
(1993),
145
- 146.
-
B. Katalinic:
"Auslegung und Steuerung von flexiblen Montagesystemen of die Montage von Geräteelektromotoren";
Talk: 2nd International Conference on Production Engineering,
Zagreb;
1993-11-18
- 1993-11-21; in: "2nd International Conference on Production Engineering",
(1993),
35
- 37.
-
B. Katalinic:
"Berechnung der Roboter -Trägheitsmatrizen";
Talk: Internationale Tagung "Moderne Fertigung und Fertigungs-Meßtechnik",
Wien;
1986-04-02
- 1986-04-04; in: "Proc. Internationale Tagung "Moderne Fertigung und Fertigungs-Meßtechnik"",
(1986),
41
- 52.
-
B. Katalinic:
"Berechnung der Trägheitsmatrizen des Knickarmroboters Prototyp 1 & 2 der Fa. Voest-Alpine AG";
Talk: Final Report, Forschungsinstitut "Advanced Robotics", Institut Nr. 311, TU-Wien,,
Wien;
1985; in: " Final Report, Forschungsinstitut "Advanced Robotics", Institut Nr. 311, TU-Wien, ",
(1985),
#
- #.
-
B. Katalinic:
"Berechnung dynamischer Koeffizienten bei der Konstruktion von Industrierobotern";
Talk: 8th International Conference "BIAM'86",
Zagreb;
1986-06-16
- 1986-06-18; in: "Proc. 8th International Conference "BIAM'86"",
(1986),
180
- 184.
-
B. Katalinic:
"BIONIC ASSEMBLY SYSTEMS : Concept design and scheduling of next generation of self-organizing flexible assembly system in CIM environment";
Talk: 1st DAAAM International Conference on Advanced Technologies for Developing Countries,
Slavonski Brod (invited);
2002-09-12
- 2002-09-14; in: "PROCEEDINGS of the 1st DAAAM International Conference on Advanced Technologies for Developing Countries",
B. Katalinic, M. Kljajin (ed.);
(2002),
459
- 470.
-
B. Katalinic:
"Bionic Assembly Systems: Design and Scheduling of Next Generation of Self-organizing Complex Flexible Assembly Systems";
Talk: 2nd International Conference "Business Systems Management"- UPS 2001,
Mostar;
2001-05-31
- 2001-06-02; in: "Proceedings of the 2nd International Conference "Business Systems Management"- UPS 2001",
V. Majstorovic, B. Katalinic, D. Covic, V. Visekruna (ed.);
DAAAM International Vienna & University of Mostar,
Mostar & Vienna
(2001),
ISBN: 3-901509-26-7;
101
- 108.
-
B. Katalinic:
"Bionic Assembly Systems: Next Generation of Self-Organizing Complex Flexible Assembly Systems";
Talk: 3rd International Conference of DAAAM National Estonia "Industrial Engineering - New Challenges to SME,
Tallinn, Estonia (invited);
2002-04-25
- 2002-04-27; in: "Proceedings of the 3rd International Conference "Industrial Engineering - New Challenges to SME"",
J. Papstel, B. Katalinic (ed.);
DAAAM National Estonia & Tallinn Technical University,
Tallinn
(2002),
ISBN: 9985-59-272-7;
96
- 99.
-
B. Katalinic:
"Characteristics of Modern Industrial Robots and their Applications";
Talk: 6th International Conference "BIAM'82",
Zagreb;
1982-06-14
- 1982-06-16; in: "Proc. 6th International Conference "BIAM'82"",
(1982),
57
- 76.
-
B. Katalinic:
"CIM - Present State and Development Trends";
Talk: 2nd International Conference on Production Engineering,
Zagreb (invited);
1993-11-18
- 1993-11-21; in: "2nd International Conference on Production Engineering",
(1993),
26
- 27.
-
B. Katalinic:
"Complex Flexible Manufacturing Systems - Design of Control Structures and Scheduling Strategies";
Talk: 25th CIRP International Seminar,
Bled, Slovenia;
1993-04-22
- 1993-04-23; in: "25th CIRP International Seminar",
(1993),
25
- 26.
-
B. Katalinic:
"Control Structure and Scheduling Strategies for flexibel Assembly System - ATB";
Talk: Vienna University of Technology,
Vienna, Austria;
1993-02-21
- 1993-02-24; in: "Final Repot , Vienna University of Technology",
(1993),
12
- 13.
-
B. Katalinic:
"DAAAM International Vienna: Background, History, Aims, Structure, Activities & Future";
Talk: 14th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Focus on Reconstruction and Development',
Sarajevo (invited);
2003-10-22
- 2003-10-25; in: "Annals of DAAAM for 2003 & Proceedings of the 14th International DAAAM Symposium",
B. Katalinic (ed.);
DAAAM International Vienna,
Vienna
(2003),
ISBN: 3-901-509-34-8;
8
- 26.
-
B. Katalinic:
"Demonstration Board for the Simulation of Digital Control Units";
Talk: 27th International Conference "JUREMA'82",
Zagreb;
1982; in: "Proc. 27th International Conference "JUREMA'82"",
(1982),
17
- 20.
-
B. Katalinic:
"Design of Scheduling Structures and Strategies for Complex Flexible Manufacturing Systems";
Talk: International Conference on Computer Integrated Manufacturing, CIM 96,
Zakopane, Poland;
1996-05-14
- 1996-05-17; in: "Proceedings of International Conference on Computer Integrated Manufacturing",
(1996),
145
- 152.
-
B. Katalinic:
"Design and Scheduling of Next Generation Self-organizing Complex Flexible Assembly System Called Biologic Assembly Systems";
Talk: 2nd Asian Symposium on Industrial Automation and Robotics - ASIAR 2001,
Bangkok, Thailand (invited);
2001-05-17
- 2001-05-18; in: "Proceedings of the 2nd Asian Symposium on Industrial Automation and Robotics - ASIAR 2001",
N. Afzulpukar (ed.);
Asian Institute of Technology,
Bangkok
(2001),
ISBN: 974-8208-34-6;
310
- 316.
-
B. Katalinic:
"Design Methodology of Scheduling Strategies and Scenarios of Complex Flexible Systems";
Talk: 29th CIRP International Seminar on Manufacturing Systems,
Osaka, Japan (invited);
1997-05-11
- 1997-05-13; in: "Proceedings of the 29th CIRP International Seminar on Manufacturing Systems",
(1997),
179
- 184.
-
B. Katalinic:
"Design Methodology of Scheduling Strategies and Scenarios of Complex Flexible Systems";
Talk: Publischer Scientific and Scientific and Technical Association of Mechanical Engineering,
Sofia (invited);
1997-11-30; in: "Scientific Reports, Year 4, No. 8",
(1997),
5
- 10.
-
B. Katalinic:
"Design of Control Structures and Strategies for Complex Flexible Manufacturing Systems";
Talk: International Conference on Production Engineering,
Zagreb, Croatia;
1992-06-12
- 1992-06-15; in: "Proc. International Conference on Production Engineering",
(1992),
24
- 26.
-
B. Katalinic:
"Design of Control Structures and Strategies for Complex FMS";
Talk: 3rd DAAAM International Symposium "Flexible and Intelligent Automation",
Budapest, Hungary;
1992-11-05
- 1992-11-06; in: "Proc. of 3rd DAAAM International Symposium "Flexible and Intelligent Automation"",
(1992),
93
- 94.
-
B. Katalinic:
"Design of Control Structures and Strategies of Complex Flexible Manufacturing Systems";
Talk: CSFR National Conference,
Kosice;
1992-09-09
- 1992-09-11; in: "Prof. CSFR National Conference",
(1992),
15
- 16.
-
B. Katalinic:
"Design of Control Structures for Complex Flexible Manufacturing Systems";
Talk: IFAC Workshop on Automatic Control Structures for Complex Flexible Manufacturing Systems,
Istanbul;
1992-06-03
- 1992-06-05; in: "IFAC Workshop on Automatic Control for Quality and Productivity "ACQP'92"",
(1992),
26
- 33.
-
B. Katalinic:
"Development and Applications of Industrial Robots";
Talk: Conference "Implementation of Electronic in Mechanical Engineering",
Fojnica;
1983-02-17
- 1983-02-19; in: "Proc. Conference "Implementation of Electronic in Mechanical Engineering"",
(1983),
191
- 198.
-
B. Katalinic:
"Development Trends in mechanical Robotics";
Keynote Lecture: International Youth Conference,
St. Petersburg (invited);
2011-09-06
- 2011-09-08; in: "Mechatronics and Robotics",
V. Lopota (ed.);
(2011),
ISBN: 978-5-905-18389-8;
5
- 6.
-
B. Katalinic:
"Eröffnungsvortrag - DAAAM International Network: Past - Present - Future";
Keynote Lecture: 22nd International DAAAM Symposium,
Wien (invited);
2011-11-23
- 2011-11-26; in: "Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: "Power of Knowledge and Creativity"",
B. Katalinic (ed.);
DAAAM International Vienna,
(2011),
ISBN: 978-3-901509-83-4;
55
- 56.
-
B. Katalinic:
"Flexibles Montagesystem für die Montage von Geräteelektromotoren - Auslegung und Steuerung";
Talk: Zeitschrift des Österreichischen Verbandes für Elektrotechnik,
Wien / New York;
1994-02-03; in: "Zeitschrift des Österreichischen Verbandes für Elektrotechnik",
(1994),
257
- 261.
-
B. Katalinic:
"Globalisation and Technology: New Possibilities and Risk Factors";
Talk: 14 th DAAAM International Symposium,
Sarajevo (invited);
2003-10-22
- 2003-10-25; in: "Annals of DAAAM for 2003 & Proceedings of the 14th International DAAAM Symposium",
B. Katalinic (ed.);
DAAAM International Vienna,
Vienna
(2003),
ISBN: 3-901-509-34-8;
205
- 210.
-
B. Katalinic:
"Industrial Robots and FMS - state of art and development trends";
Talk: International Conference KoREMA´92,
Zagreb, Croatia;
1992-04-26
- 1992-04-29; in: "Proc. International Conference KoREMA'92",
(1992),
14
- 16.
-
B. Katalinic:
"Intelligent Manufacturing Systems als logisches Ergebnis der Evolution von Produktionsystemen";
Talk: 13th International Conference BIAM´96,
Zagreb;
1996-06-18
- 1996-06-21; in: "Proceedings of the 13th International Conference BIAM´96",
(1996),
A-1
- A-4.
-
B. Katalinic:
"Intelligent Scheduling of Robotized Flexible Assembly System";
Talk: International Conference ISMCR-93,
Torino, Italy;
1993-09-21
- 1993-09-24; in: "Proc. International Conference ISMCR-93",
(1993),
126
- 127.
-
B. Katalinic:
"Kinematical Characteristics of Industrial Robot's Trajectories";
Talk: 5th International Conference "BIAM'80",
Zagreb;
1980-06-09
- 1980-06-11; in: "Proc. 5th International Conference "BIAM'80"",
(1980),
6
- 44.
-
B. Katalinic:
"Kinematical Structures of Nowadays Industrial Robots";
Talk: 7th International Conference "BIAM'84",
Zagreb;
1984-06-30; in: "Proc. 7th International Conference "BIAM'84"",
(1984),
35
- 46.
-
B. Katalinic:
"Megatrends in der Automatisierung der Produktion, Elektrotechnik und Informationstechnik";
Talk: Zeitschrift des Österreichischen Verbandes für Elektrotechnik,
Wien / New York;
1996; in: "Zeitschrift des Österreichischen Verbandes für Elektrotechnik",
(1996),
169
- 171.
-
B. Katalinic:
"Meßtechnik zur Optimierung bzw. Rationalisierung bei der Planung von Robotern und bei deren Steuerung und Überwachung";
Talk: 4. Österreichisches Kolloquium für Experimentelle Dehnungs- und Spannungsanalyse,
St.Wolfgang;
1987-10-22
- 1987-10-24; in: "Proc. "4. Österreichisches Kolloquium für Experimentelle Dehnungs- und Spannungsanalyse"",
(1987),
#.
-
B. Katalinic:
"New Engineers for the Future: Action Balanced between Intelligence, Wisdom and Ethics";
Talk: 10th Losinj Days of Bioethics,
Mali Losinj (invited);
2011-05-15
- 2011-05-18; in: "10th Losinj Days of Bioethics",
A. Covic (ed.);
(2011),
39
- 42.
-
B. Katalinic:
"Optimierung der Abläufe eines komplexen FFS durch heuristische Vorgangsweise zur Lösung von Konfliktsituationen, 175-Jahre Vienna University of Technology";
Talk: Internationales Symposium "Automatisation und Meßtechnik",
Wien;
1990-11-05; in: "Proc. Internationales Symposium "Automatisation und Meßtechnik"",
(1990),
65
- 66.
-
B. Katalinic:
"Optimierung der Maschinenbelegung in flexiblen Fertigungssystemen unter Berücksichtigung der im System vorhandenen Engpässe";
Talk: XI. Werkzeugmaschinen Kolloquium, Wissenschaftlicher Verein für Maschinenbau,
Budapest;
1988; in: "Proc. XI. Werkzeugmaschinen Kolloquium, Wissenschaftlicher Verein für Maschinenbau",
(1988),
#.
-
B. Katalinic:
"Optimierung der Maschinenbelegung in flexiblen Fertigungssystemen unter Berücksichtigung der Systemengpässe";
Talk: 9th International Symposium BIAM`88,
Zagreb;
1988-06-13
- 1988-06-15; in: "Proc. 9th International Symposium BIAM`88",
(1988),
211
- 214.
-
B. Katalinic:
"Optimisation of Use and Management of Production Resources in Complex FMS";
Talk: Workshop: Manufacturing Resource Planning,
Brussels, Belgium;
1993-05-10
- 1993-05-11; in: "Proceedings of Workshop: Manufacturing Resource Planning",
(1993),
ISBN: 2-87352-009-4;
14
- 17.
-
B. Katalinic:
"Organisation and Scheduling of Transport System for Böhler Plant";
Talk: Vienna University of Technology, Institut No. 311 & Interuniversitäry Center for CIM,
Wien;
1991-11-30; in: "Final Report, Vienna University of Technology, Institut No. 311 & Interuniversitäry Center for CIM",
(1991).
-
B. Katalinic:
"Robotics - Short List of Terms and Definitions";
Talk: Supported by the COMETT Programme of the Commission of the EUROPEAN Communities,
Aachen, Germany;
1993-10-11
- 1993-11-06; in: "Supported by the COMETT Programme of the Commission of the EUROPEAN Communities",
(1993),
45
- 46.
-
B. Katalinic:
"Robots in Modern Industry";
Talk: 8th International Conference - Society of Plastics and Rubber Engineers,
Zagreb;
1988-03-07
- 1988-03-11; in: "Proc. 8th International Conference - Society of Plastics and Rubber Engineers",
(1988),
1
- 8.
-
B. Katalinic:
"Simulation of FMS for New Sling Factory, Just-in-Time Concept, Kone Sowitsch Company";
Talk: Institut für Fertigungstechnik & Forschungsinstitut "Advanced Robotics", Institut Nr. 311, TU-Wien,
Wien;
1991-06-30; in: "Final Report, Institut für Fertigungstechnik & Forschungsinstitut "Advanced Robotics"",
(1991).
-
B. Katalinic:
"Simulation und FMS";
Talk: 2nd International Symposium Danubia-Adria Association for Automation and Metrology,
Strbske Pleso, Slovakia;
1991-12-09
- 1991-12-11; in: "5. Proc. of 2nd International Symposium Danubia-Adria Association for Automation and Metrology",
(1991),
ISBN: 80-233-0225-6;
72
- 73.
-
B. Katalinic:
"Speech by Prof. Dr. Branko Katalinic";
Talk: Dies Academicus - Doctor honoris causa Speech,
Mostar (invited);
2003-12-15; in: "Prof. dr. sc. Branko Katalinic",
University of Mostar,
(2003),
24
- 29.
-
B. Katalinic:
"Stability Tests of Systems by Using Bode's or Nichols' Diagrams and a Digital Computer";
Talk: 27th International Conference "JUREMA'82",
Zagreb;
1982; in: "Proc. 27th International Conference JUREMA'82",
(1982),
21
- 24.
-
B. Katalinic:
"Technical Product as a Materialisation of Engineers Idea and Design Strategy of Nature";
Talk: 4th Workshop "Human Factor and Environmntalist",
Kosice, Slovakia (invited);
2002-12-05
- 2002-12-05; in: "Proceedings of the 4th Workshop "Human Factor and Environmentalist"",
B. Katalinic, E. Wessely (ed.);
DAAAM International Vienna,
(2002),
ISBN: 3-901509-37-2;
9
- 12.
-
B. Katalinic:
"Technical Product as Materialisation of Engineers Idea and Design Strategies of Natuer";
Talk: 1st International Textile, Clothing & Design Conference - Magic World of Textile - ITC&DC,
Dubrovnik (invited);
2002-10-06
- 2002-10-09; in: "Proceedings of the 1st International Textile, Clothing & Design Conference - Magic World of Textile, ITC&DC",
Z. Dragicevic (ed.);
University of Zagreb, Faculty of Textile Technologies,
(2002),
ISBN: 953-96408-8-1;
3
- 7.
-
B. Katalinic:
"Trends, Definitions, Population and Welding Applications of Modern Industrial Robots";
Talk: International Conference "Mechanization, Automation, Robotics and Computer Application in Welding",
Wien;
1987-10-01
- 1987-10-03; in: "Proc. International Conference "Mechanization, Automation, Robotics and Computer Application in Welding"",
(1987),
159
- 170.
-
B. Katalinic, J. Balic, I. Pahole:
"Scheduling of Complex Flexible Manufacturing Systems- Methodology Design";
Talk: Journal of Mechanical Engineering,
Ljubljana;
1998-05-30
- 1998-06-30; in: "Journal of Mechanical Engineering (44) No. 5-6",
(1998),
168
- 174.
-
B. Katalinic, S. Celar:
"Computersimulation für die Auslegung und Steuerung von FFS";
Talk: 7th International DAAAM Symposium,
Wien;
1996-10-17
- 1996-10-19; in: "Proceedings of the 7th International DAAAM Symposium",
(1996),
203
- 204.
-
B. Katalinic, S. Celar:
"Discrete-event Based Computer Simulation of Complex Flexible Manufacturing Systems";
Talk: 13th International Conference BIAM´96,
Zagreb;
1996-06-18
- 1996-06-21; in: "Proceedings of the 13th International Conference BIAM´96",
(1996),
J-1
- J-4.
-
B. Katalinic, S. Celar:
"Simulation als Werkzeug bei der Auslegung und Steuerung des FFS für Blechbearbeitung";
Talk: 12th International Conference BIAM'94,
Zagreb;
1994-06-23
- 1994-06-24; in: "Proceedings of the 12th International Conference BIAM’94",
(1994),
9
- 12.
-
B. Katalinic, I Cosic, V. Katic, Z. Tekic:
"Engineers for knowledge based Society";
Talk: 17th Conference an Development Trends,
Kopaonik (invited);
2011-03-07
- 2011-03-10; in: "Europe 2020: Knowledge based Society",
V. Katic (ed.);
(2011),
13
- 21.
-
B. Katalinic, A. Divic:
"Auslegung einer robotisierten Zelle für die Kommissionierung von Teilen vor der Montage";
Talk: 4. Internationales DAAAM Symposium "Automation und Metrologie: Mensch, Technik, Umwelt",
Brno, Tschechien;
1993-09-16
- 1993-09-18; in: "4. Internationales DAAAM Symposium "Automation und Metrologie: Mensch, Technik, Umwelt"",
(1993),
147
- 148.
-
B. Katalinic, S. Egorov:
"Subordination and Selforganisation in the Bionic Assembly Systems";
Talk: 13th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Learning from Nature',
Vienna;
2002-10-23
- 2002-10-26; in: "Annals of DAAAM for 2002 & Proceedings of the 13th International DAAAM Symposium",
B. Katalinic (ed.);
DAAAM International Vienna,
Vienna
(2002),
ISBN: 3-901509-29-1;
253
- 254.
-
B. Katalinic, E Fabian:
"Automatische Identifikation als Baustein der CIM-Lösungen in Produktionbetrieben";
Talk: 13th International Conference BIAM´96,
Zagreb;
1996-06-18
- 1996-06-21; in: "Proceedings of the 13th International Conference BIAM´96",
(1996),
F-1
- F-4.
-
B. Katalinic, E Fabian:
"Konzept eines sophistieziertes Manipulationssystems für komplexe logistische Aufgaben";
Talk: 7th International DAAAM Symposium,
Vienna;
1996-10-17
- 1996-10-19; in: "Proceedings of the 7th International DAAAM Symposium",
(1996),
205
- 206.
-
B. Katalinic, E. Hajrizi:
"Comparison of Working Scenarios by "GA - Optimizer" - an Intelligent Software Modul for Optimization of Complex FMS Scheduling";
Talk: 11the International DAAAM Symposium,
Opatija;
2000-10-19
- 2000-10-21; in: " Annals of DAAAM for 2000 & Proceedings of the 11the International DAAAM Symposium, Opatija",
B. Katalinic (ed.);
(2000),
ISBN: 3-901509-13-5;
8S
- 9S.
-
B. Katalinic, E. Hajrizi:
"Die Struktur eines intelligenten Moduls für Leitstandsoftware komplexer FFS";
Talk: 8th International Scientific Conference Co-Mat-Tech,
Trnava;
2000-10-19
- 2000-10-20; in: "Proceedings of the 8th International Scientific Conference Co-Mat-Tech 2000",
(2000),
ISBN: 80-227-1413-5;
127
- 132.
-
B. Katalinic, A. Kavaz:
"Scheduling Algorithm of Sequence of Orders in a Linear Assembly Line with Limited Buffers";
Talk: 14th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Focus on Reconstruction and Development',
Sarajevo (invited);
2003-10-22
- 2003-10-25; in: "Annals of DAAAM for 2003 & Proceedings of the 14th International DAAAM Symposium",
B. Katalinic (ed.);
DAAAM International Vienna,
Vienna
(2003),
ISBN: 3-901-509-34-8;
213
- 214.
-
B. Katalinic, V. Kordic:
"Bionic Assembly System: Concept, Structure and Function";
accepted as talk for: 5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering,
Bath, United Kingdom (invited);
2004-04-05
- 2004-04-07; in: "Proceedings of 5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering",
(2004).
-
B. Katalinic, V. Kordic:
"Bionic Assembly Systems: Autonomous Agents in Self Organising Complex Flexible Assembly System in CIM Environment";
Talk: 4th International Workshop on Emergent Synthesis - IWES`02,
Kobe, Japan (invited);
2002-05-09
- 2002-05-10; in: "Proceedings of 4th International Workshop on Emergent Synthesis",
K. Ueda (ed.);
Kobe University,
(2002),
3
- 12.
-
B. Katalinic, V. Kordic:
"Control System of Transport Class Assembly Units of Biologic Assembly System";
Talk: 14 th DAAAM International Symposium,
Sarajevo, Bosnia and Hezegovina;
2003-10-22
- 2003-10-25; in: "Annals of DAAAM for 2003 & Proceedings of the 14 th DAAAM International Symposium",
B. Katalinic (ed.);
DAAAM International Vienna,
Vienna
(2003),
ISBN: 3-901509-34-8;
213
- 214.
-
B. Katalinic, V. Kordic:
"Reconfigurable assembly by reactive autonomous robots";
accepted as talk for: International Symposium on Robotics and Automation - ISRA 2004,
Queretaro, Mexico;
2004-08-25
- 2004-08-27; in: "Proceedings of International Symposium on Robotics and Automation - ISRA 2004",
(2004).
-
B. Katalinic, V. Kordic:
"Simple reactive robots in assembly domain";
accepted as talk for: 8th International Conference on Mechatronics Technology,
Hanoi, Vietnam;
2004-11-08
- 2004-11-12; in: "Proceedings of 8th International Conference on Mechatronics Technology",
(2004).
-
B. Katalinic, V. Kordic, I Cosic:
"Bionic Assembly System";
Talk: HIPNEF 2004,
Vrnjacka Banja (invited);
2004-05-19
- 2004-05-21; in: "29th Scientific-Expert Conference Proceedings",
M Stojiljkovic et al. (ed.);
Mechanical Faculty, University of Nis,
29
(2004),
ISBN: 86-80587-31-1;
35
- 42.
-
B. Katalinic, V. Kordic, M. Stopper:
"Interaction of Subordination and Self-Organisation in Working Scenarios of Bionic Assembly System";
Talk: The 3rd Asian Conference on Automation and Robotics - ASIAR 03,
Bangkok, Thailand (invited);
2003-05-08
- 2003-05-09; in: "Proceedings of the 3rd Asian Conference on Automation and Robotics - ASIAR 03",
Asian Institute of Technology,
Bangkok, Thailand
(2003),
ISBN: 974-229-467-4;
136
- 141.
-
B. Katalinic, A. Lazinica:
"Design of Autonomous Mobile Robots in Bionic Assembly System: Project Concept";
Talk: 14th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Focus on Reconstruction and Development',
Sarajevo (invited);
2003-10-22
- 2003-10-25; in: "Annals of DAAAM for 2003 & Proceedings of the 14th International DAAAM Symposium",
B. Katalinic (ed.);
DAAAM International Vienna,
Vienna
(2003),
ISBN: 3-901-509-34-8;
215
- 216.
-
B. Katalinic, A. Lazinica, M. Merdan:
"Bionic Assembly System and Evolutionary Robotics: Research Project Concept";
Talk: 6th International Conference Modern Technologies in Manufacturing,
Cluj-Napoca (invited);
2003-10-02
- 2003-10-04; in: "Annals of MTeM for 2003 & Proceedings of 6th International Conferece Modern Technologies in Manufacturing",
C. Gyenge (ed.);
Technical University of Cluj-Napoca,
(2003),
267
- 270.
-
B. Katalinic, B. Ljoljic:
"Optimal Variant Determination of Wall - Unit Housing";
Talk: 11the International DAAAM Symposium,
Opatija;
2000-10-19
- 2000-10-21; in: "Annals of DAAAM for 2000 & Proceedings of the 11the International DAAAM Symposium",
B. Katalinic (ed.);
(2000),
ISBN: 3-901509-13-5;
215
- 216.
-
B. Katalinic, B. Ljoljic:
"Warehousing System as Component Reduction of Business Expenditures";
Talk: 2nd International Conference "Business Systems Management"- UPS 2001,
Mostar;
2001-05-31
- 2001-06-02; in: "Proceedings of the 2nd International Conference "Business Systems Management"- UPS 2001",
V. Majstorovic, B. Katalinic, D. Covic, V. Visekruna (ed.);
DAAAM International Vienna & University of Mostar,
Mostar & Vienna
(2001),
ISBN: 3-901509-26-7;
109
- 111.
-
B. Katalinic, M. Merdan, A. Lazinica:
"An Algorithm for Solving Assembly Station Overloading in Bionic Assembly System";
Talk: 14th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Focus on Reconstruction and Development',
Sarajevo (invited);
2003-10-22
- 2003-10-25; in: "Annals of DAAAM for 2003 & Proceedings of the 14th International DAAAM Symposium",
B. Katalinic (ed.);
DAAAM International Vienna,
Vienna
(2003),
ISBN: 3-901-509-34-8;
217
- 218.
-
B. Katalinic, J. Nanasi:
"Effizienzerhöhung von FFS durch Intelligente Vernetzung";
Talk: 7th International DAAAM Symposium,
Wien;
1996-10-17
- 1996-10-19; in: "Proceedings of the 7th International DAAAM Symposium",
(1996),
207
- 208.
-
B. Katalinic, J. Nanasi:
"Ein Expertensystem für die Planung auf dem FFS- Leitstand";
Talk: Proceedings of International Conference on Computer Integrated Manufacturing,
Zakopane, Poland;
1996-05-14
- 1996-05-17; in: "Proceedings of International Conference on Computer Integrated Manufacturing , CIM 96, Volume II",
(1996),
153
- 158.
-
B. Katalinic, J. Nanasi:
"Expertensysteme bei der intelligenten Steuerung von komplexen flexiblen Systemen";
Talk: 12th International Conference BIAM'94,
Zagreb, Kroatien;
1994-06-23
- 1994-06-24; in: "Proceedings of the 12th International Conference BIAM'94",
(1994),
ISBN: 953-6037-03-3;
57
- 60.
-
B. Katalinic, Z. Sarson:
"A Practical Example of Industrial Robot's Application";
Talk: 5th International Conference "BIAM'80",
Zagreb;
1980-06-09
- 1980-06-11; in: "Proc. 5th International Conference BIAM'80",
(1980),
6
- 95.
-
B. Katalinic, K. Stuja, S. Pllana:
"Arena: Enterprise Wide Modeling and Simulation";
Talk: 2nd DAAAM International Workshop "Intelligent Manufacturing Systems",
Kosice;
2000-11-30
- 2000-11-30; in: "Proceedings of the 2nd DAAAM International Workshop "Intelligent Manufacturing Systems"",
B. Katalinic (ed.);
(2000),
ISBN: 3-901509-18-6;
37
- 38.
-
B. Katalinic, T. Surina:
"Inertial Load by Industrial Robots";
Talk: International Conference "Informatica '79",
Bled;
1979; in: "Proc. International Conference "Informatica '79"",
(1979),
6
- 107.
-
B. Katalinic, T. Udiljak:
"Comlex Flexible Manufacturnig Systems: Design Methodology of Working Scenarios and Schedulig Strategies";
Talk: IASTED International Conference "Robotics and Manufacturing",
Banff, Canada;
1998-07-26
- 1998-07-29; in: "Proceedings of the IASTED International Conference "Robotics and Manufacturing"",
(1998),
81
- 88.
-
B. Katalinic, T. Udiljak:
"Production Systems and Automation: Actual State and Development Trends (in Croatien)";
Talk: Journal of Textile Technology, Vol 48 br. 1,
Zagreb;
1999-01-31; in: "Journal of Textile Technology, Vol 48 br. 1",
(1999),
1
- 7.
-
B. Katalinic, T. Udiljak, H. Park:
"Design Methodology of Scheduling Strategies and Scenarios of Complex Flexible Systems";
Talk: 10th International Conference on Flexible Automation and Intelligent Manufacturing,
University of Maryland at College Park,Maryland;
2000-06-26
- 2000-06-28; in: "Proceedings of the 10th International Conference on Flexible Automation and Intelligent Manufacturing",
(2000),
ISBN: 0-9701053-0-4;
215
- 223.
-
B. Katalinic, V. Visekruna, V. Kordic:
"Bionic Assembly System: Design and Scheduling of Next Generation of Self Organising Complex Flexible Assembly System in CIM Environment";
Talk: 35th CIRP International Seminar on Manufacturing Systems "Manufacturing Technology in the Information Age",
Seoul, Korea;
2002-05-13
- 2002-05-15; in: "Proceeding of 35th CIRP International Seminar on Manufacturing Systems - Manufacturing Technology in the Information Age",
K. Lee et al. (ed.);
Seoul National University,
(2002),
155
- 162.
-
M. Klingenbrunner, J. Platzer, F. Bleicher:
"Determining thr emissivity factor of thermoplastic materials for a thermoplastic bending process";
Talk: 35th Danubia-Adria Symposium on Advances in Experimental Mechanics,
Romania (invited);
2018-09-25; in: "The Romanian Association for Stress Analysis and Materials Testing - ARTENS",
(2018),
ISBN: 978-606-23-0874-2.
-
H. Koch, R. Gómez Vázquez, A. Otto:
"A multiphysical simulation model for laser based manufacturing";
Talk: ECCOMAS 2012 (European Congress on Computational Methods in Applied Sciences and Engineering,
Wien;
2012-09-10
- 2012-09-14; in: "Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering",
TU Wien,
Wien
(2012),
ISBN: 978-3-9502481-9-7;
14 pages.
-
H. Koch, R. Gómez Vázquez, A. Otto:
"Analysis of Distortion Effects on Weld Pool Dynamics in Laser Beam Welding";
Talk: IWOTE 2014,
Bremen (Deutschland);
2014-04-09
- 2014-04-10; in: "Proceedings of the IWOTE 2014: International Workshop on Thermal Forming and Welding Distortion",
Strahltechnik / BIAS Verlag,
Volume 54 / 2014 / Bremmen
(2014),
ISBN: 978-3-933762-48-1;
165
- 172.
More information
-
H. Koch, R. Gómez Vázquez, A. Otto:
"Multiphysical Simulation of Laser Material Processing";
Talk: Lane 2012,
Erlangen, BRD (invited);
2012-11-12
- 2012-11-15; in: "Physics Proceedia",
A. Otto (ed.);
Elsevier,
Volume 39
(2012),
Paper ID 1875-3892,
9 pages.
More information
-
V. Kordic, B. Katalinic:
"Agent Environment Interaction and Specialisation";
Talk: 3rd DAAAM International Workshop "Intelligent Manufacturing Systems",
Kosice, Slovak Republic;
2001-11-29; in: "Proceeding of 3rd DAAAM International Workshop - Intelligent Manufacturing Systems",
(2001),
ISBN: 3-901509-31-3;
37
- 38.
-
V. Kordic, B. Katalinic, B. Ljoljic:
"Agent Based Manufacturing";
Talk: 4th Workshop "Human Factor and Environmentalist",
Kosice, Slovaki;
2002-11-05; in: "Proceedings of the 4th Workshop 'Human Factor and Environmentalist'",
B. Katalinic, E. Wessely (ed.);
DAAAM International Vienna,
Vienna
(2002),
ISBN: 3-901509-37-2;
53
- 54.
-
V. Kordic, B. Katalinic, B. Ljoljic:
"Toward Autonomous Agent Design Concept";
Talk: 3rd International Conference of DAAAM National Estonia "Industrial Engineering - New Challenges to SME,
Tallin, Estonia;
2002-04-25
- 2002-04-27; in: "Proceedings of 3rd International Conference Industrial Engineering",
(2002),
ISBN: 9985-59-272-7;
100
- 103.
-
V. Kordic, B. Katalinic, K. Stuja:
"Requierements for Complete Agents";
Talk: 12th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Focus on Precision Engineering,
Jena, Germany;
2001-10-24
- 2001-10-27; in: "Proceeding of 12th DAAAM International Symposium - Intelligent Manufacturing & Automation - Focus on Precision Engineering",
B. Katalinic (ed.);
DAAAM International Vienna,
Vienna
(2001),
ISBN: 3-901509-19-4;
243
- 244.
-
V. Kordic, B. Ljoljic, K. Stuja:
"Synthesis of Autonomous Agent";
Talk: 13th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Learning from Nature',
Vienna;
2002-10-23
- 2002-10-26; in: "Annals of DAAAM for 2002 & Proceedings of the 13th International DAAAM Symposium",
B. Katalinic (ed.);
DAAAM International Vienna,
Vienna
(2002),
ISBN: 3-901509-29-1;
275
- 276.
-
P. Kostal, B. Katalinic, J. Bindas:
"Application of Ultrasound by Grinding";
Talk: 13th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Learning from Nature',
Vienna;
2002-10-23
- 2002-10-26; in: "Annals of DAAAM for 2002 & Proceedings of the 13th International DAAAM Symposium",
B. Katalinic (ed.);
DAAAM International Vienna,
Vienna
(2002),
ISBN: 3-901509-29-1;
281
- 282.
-
P. Kostal, B. Katalinic, M. Matusova:
"Analysing of Positioning and Clamping Cases";
Talk: 12th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Focus on Precision Engineering,
Jena, Germany;
2001-10-24
- 2001-10-27; in: "Annals of DAAAM for 2001 & Proceedings of the 12the International DAAAM Symposium",
B. Katalinic (ed.);
DAAAM International Vienna,
Vienna
(2001),
ISBN: 3-901509-19-4;
247
- 248.
-
I. Kovacic, K. Orehounig, U. Renger, L. Oberwinter, C. Dorn, F. Bleicher, A. Mahdavi:
"A holistic model for an energy efficient production facility";
Talk: 1st International Conference On Sustainable Intelligent Manufacturing,
Leiria, Portugal;
2011-06-28
- 2011-07-01; in: "1st International Conference On Sustainable Intelligent Manufacturing",
J. Bartolo et al. (ed.);
eigene Publikation - Conference,
1
(2011).
More information
-
E. Kozeschnik, B. Adjassoho, C. Lechner, Ch. Habersohn, F. Bleicher, S. Gössinger, C. Bauer:
"Controlled Surface Treatment With Machine Hammer Peening";
Talk: 22nd International Conference on Metallurgy and Materials,
Brno, Tschechien;
2012-05-15
- 2012-05-17; in: "METAL 2013",
(2012),
Paper ID B28,
6 pages.
More information
-
L. Kräuter, M.N. Durakbasa, P.H. Osanna:
"Interrelation of Metrology and Nanotechnology with intellectual Property Rights";
Talk: The 9th International Symposium on Measurement Technology and Intelligent Instruments,
St. Petersburg;
2009-06-29
- 2009-07-02; in: "Proceedings of ISMTII-2009",
D.S. Rozhdestvensky Optical Society,
I/Russia
(2009),
167
- 171.
-
L. Kräuter, M.N. Durakbasa, P.H. Osanna:
"Metrology and Nanotechnology in Interrelation with Intellectual Property Rights";
Talk: 7th International Conference on Measurement,
Congress Centre of SAS, Smolenice Castle, Slovakia;
2009-05-20
- 2009-05-23; in: "MEASUREMENT 2009",
M. Tysler et al. (ed.);
Institute of Measurement Science, SAS,
Bratislava
(2009),
ISBN: 978-80-969672-1-6;
173
- 177.
-
L. Kräuter, P.H. Osanna, M.N. Durakbasa:
"Quality Assurance and Metrology for Change Management Process under Socio-Economic Human Aspects - Investigation and Results";
Talk: Proceedings Measurement 2007 Institute of Measurement Science,
Smolenice, Slovakia;
2007-05-20
- 2007-05-24; in: "Proceedings Measurement 2007",
i. Frollo et al. (ed.);
Institute of Measurement Science, SAS,
Bratislava
(2007),
ISBN: 978-80-969672-0-9;
371
- 375.
-
S. Krall:
"MHP - actuator concepts and applications";
Talk: 7. WMHP,
RWTH Aachen (invited);
2018-11-13; in: "7th Workshop Machine Hammer Peening",
(2018),
ISBN: 978-3-86359-666-8;
85
- 100.
-
S. Krall, C. Lechner, M. Nirtl, F. Bleicher:
"Robot based machine hammer peening using an electromagnetic driven hammer device";
Talk: 26th DAAAM International Symposium 2015,
Zadar (invited);
2015-10-21
- 2015-10-24; in: "26th DAAAM International Symposium 2015",
(2015).
-
S. Krall, M. Reiter, F. Bleicher:
"Influence Of Mhp-Technology On The Surface Near Material Structure Of Stainless Steel 1.4301";
Poster: 34th Danubia-Adria Symposium on Advances in Experimental Mechanics,
University of Trieste, Italy (invited);
2017-09-19
- 2017-09-22; in: "DAS2017",
(2017),
ISBN: 978-88-8303-863-1.
-
A. Kratky, F. Bammer, D. Schuöcker:
"Recent Progress in Laser Assisted Forming";
Keynote Lecture: 5th Lane 2007,
Erlangen Germany (invited);
2007-09-25
- 2007-09-28; in: "Laser Assisted Net Shape Engineering 5",
Laser Assisted Net Shape Engingeering 5,
1
(2007),
ISBN: 978-3-87525-261-3;
53
- 61.
More information
-
A. Kratky, G. Liedl, R. Bielak:
"LADD - Laser assisted deep drawing";
Talk: LANE 2004,
Erlangen;
2004-09-21
- 2004-09-24; in: "Proceedings of the 4th LANE",
Meisenbach Bamberg,
(2004),
ISBN: 3-87525-202-0;
1125
- 1134.
More information
-
A. Kratky, D. Schuöcker, G. Liedl:
"Processing with kW fibre lasers - advantages and limits";
Talk: GCL/HPL,
Lissabon (invited);
2008-09-15
- 2008-09-19; in: "Proceedings",
SPIE,
(2008),
1
- 11.
More information
-
J. Kundrak, P.H. Osanna, A. Afjehi-Sadat, V. Bana:
"Surface Quality of Hard Turned Holes";
Talk: IMEKO XVIII World Congress,
Rio de Janeiro, Brasilien;
2006-09-17
- 2006-09-22; in: "IMEKO XVIII World Congress Metrologia",
(2006),
Paper ID #,
6 pages.
-
F. Lackner, R. Riegler, P.H. Osanna, M.N. Durakbasa:
"High Precision Strain Gage Based Sensor for Monitoring Suspension Forces at CERN";
Talk: Proceedings Measurement 2007 Institute of Measurement Science,
Smolenice, SK;
2007-05-20
- 2007-05-24; in: "Measurement 2007",
i. Frollo et al. (ed.);
Institute of Measurement Science, SAS,
Bratislava
(2007),
ISBN: 978-80-969672-0-9;
366
- 370.
-
M. Lackner, M. Schwarzott, G. Liedl et al.:
"Heat transfer to a single plastic resin particle - Experimental investigations by flames and laser pulses";
Poster: 3rd European Combustion Meeting ECM 2007,
Chania, Crete;
2007-04-11
- 2007-04-13; in: "Proceedings ECM2007",
(2007).
-
M. Lamprecht, M. Leonhartsberger, S. Krall, F. Bleicher:
"Influence parameters on shaft deflection of a roll forming mill";
Talk: 37th Danubia-Adria Symposium on Advances in Experimental Mechanics,
Johannes Kepler University, Linz, (invited);
2021-09-21
- 2021-09-24; in: "Book of Abstracts",
(2021),
ISBN: 978-3-9504997-0-4.
-
A. Lazinica, B. Katalinic:
"Assembly Station Robot In Bionic Assembly System";
Talk: 13th International Conference "Industrial Systems",
Herceg Novi, Serbia&Montenegro (invited);
2005-09-07
- 2005-09-09; in: "Proceedings of 13th International Conference "Industrial Systems"",
(2005),
273
- 278.
-
A. Lazinica, B. Katalinic:
"Behavior of Transport Mobile Robot in Bionic Assembly System";
Talk: IEEE International Conference on Mechatronics - ICM 2005,
Taipei, Taiwan (invited);
2005-07-10
- 2005-07-12; in: "Proceedings of IEEE International Conference on Mechatronics - ICM 2005",
(2005),
ISBN: 0-7803-8999-9;
220
- 225.
-
A. Lazinica, B. Katalinic:
"Design of Transport Mobile Robot Behavior in Self-Organising Assembly System";
Talk: 2005 IEEE/ASME International Conference on Advanced Intelligent Mechatronics - AIM 2005,
Monterey, California, USA (invited);
2005-07-24
- 2005-07-28; in: "Proceedings of 2005 IEEE/ASME International Conference on Advanced Intelligent Mechatronics - AIM 2005",
(2005),
ISBN: 0-7803-9046-6;
100
- 105.
-
A. Lazinica, B. Katalinic:
"Multi-robot system for assembly applications";
Talk: 36th Internaitonal Symposium on Robotics,
Tokyo, Japan (invited);
2005-11-29
- 2005-12-01; in: "Proceedings of 36th International Symposium on Robotics",
(2005),
ISBN: 4-9902717-0-x;
42
- 47.
-
A. Lazinica, B. Katalinic:
"Navigation of Transport Mobile Robot in Bionic Assembly System";
Talk: Proceedings of 4th Asian Conference on Industrial Automation and Robotics - ACIAR 2005,
Bangkok, Thailand (invited);
2005-05-11
- 2005-05-13; in: "Proceedings of 4th Asian Conference on Industrial Automation and Robotics - ACIAR 2005",
(2005),
ISBN: 974-8208-58-3;
27
- 31.
-
A. Lazinica, B. Katalinic:
"Reconfiguration of transport mobile robot queues in Bionic Assembly System";
Talk: Annals & Proceedings of 16th DAAAM Internaitonal Symposium,
Opatija, Croatia (invited);
2005-10-19
- 2005-10-22; in: "Annals & Proceedings of 16th DAAAM International Symposium",
DAAAM International Vienna,
(2005),
ISBN: 3-901509-46-1;
221
- 222.
-
C. Lechner, F. Bleicher, Ch. Habersohn, C. Bauer, S. Gössinger:
"The use of Machine Hammer Peening technology for smoothening and structuring of surfaces";
Talk: 23rd International DAAAM Symposium,
Zadar, Kroatien;
2012-10-24
- 2012-10-27; in: "Annals of DAAAM for 2012 & Proceedings of the 23rd International DAAAM Symposium",
DAAAM International Vienna, Austria, EU, 2012,
23/1
(2012),
ISSN: 2304-1382;
331
- 337.
-
C. Lechner, Ch. Habersohn, Y. Kalkan, F. Bleicher:
"Investigation of the influence of workpiece clamping depended virbration on machine hammer peened surfaces";
Poster: 31st Danubia-Adria Symposium on Advances in Experimental Mechanics,
Kempten (invited);
2014-09-24
- 2014-09-27; in: "31st Danubia-Adria Symposium on Advances in Experimental Mechanics",
VDI Verein Deutscher Ingenieure e.V.,
(2014),
ISBN: 978-3-00-046740-0;
46
- 47.
-
K. Leitz, H. Koch, A. Otto et al.:
"Numerical Simulation of Drilling with Pulsed Beams";
Talk: Lane 2012,
Erlangen, BRD;
2012-11-12
- 2012-11-15; in: "Physics Procedia",
Elsevier,
Volume 39
(2012),
9 pages.
More information
-
I. Leobner, W. Kastner, I. Kovacic, B. Heinzl, M. Rößler, F. Dür, T. Flatz, K. Ponweiser, F. Bleicher:
"Interdisziplinäre Optimierungsstrategien zu Energieeffizienz in Produktionsbetrieben";
Talk: 8. Internationale Energiewirtschaftstagung,
Wien;
2013-02-13
- 2013-02-15; in: "8. Internationale Energiewirtschaftstagung an der TU Wien",
(2013),
1
- 11.
More information
-
I. Leobner, K. Ponweiser, C. Dorn, F. Bleicher:
"Monitoring of Energy Flows and Optimization of Energy Efficiency in a Production Facility";
Talk: Proceedings of the 5th International Conference on Energy and Development - Environment - Biomedicine 2011 (EDEB '11),
Corfu Island, Greece;
2011-07-14
- 2011-07-16; in: "RECENT RESEARCHES in GEOGRAPHY, GEOLOGY, ENERGY, ENVIRONMENT and BIOMEDICINE",
(2011),
ISBN: 978-1-61804-022-0;
Paper ID 303-269,
5 pages.
-
I. Leobner, P. Smolek, B. Heinzl, I. Kovacic, F. Dür, K. Ponweiser, W. Kastner:
"Balanced Manufacturing - a Methodology for Energy Efficient Production Plant operation";
Talk: 10th Conference on Sustainable Development of Energy, Water and Environment Systems,
Dubrovnik, Croatia;
2015-09-27
- 2015-10-02; in: "Proceedings of the 10th Conference on Sustainable Development of Energy, Water and Environment Systems",
(2015),
10 pages.
More information
-
M. Leonhartsberger, M. Lamprecht, F. Bleicher:
"Influence Parameters On Tool Deflections In Roll Forming";
Talk: 31st Daaam International Symposium On Intelligent Manufacturing And Automation,
Online-Meeting Mostar (invited);
2020-10-21
- 2020-10-24; in: "DAAAM Proceedings",
(2020),
ISBN: 9783902734297;
0701
- 0707.
-
W. Lepuschitz, T. Trautner, M. Mayerhofer, S. Mansour-Duschet, I. Ayatollahi, M. Merdan:
"Applying Ontologies in a Cloud Manufacturing System";
Talk: IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society,
Lisbon, Portugal;
2019-10-14
- 2019-10-17; in: "IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society",
IEEE,
(2019),
ISBN: 978-1-7281-4878-6;
2928
- 2933.
-
J. Lewandowski, M. Buhl, B. Kittl:
"IT Applications in Production Planning and Control";
Talk: ICETE 2008 International Joint Conference on e-Business and Telecommunications,
Porto/Portugal;
2008-07-26
- 2008-07-29; in: "ICE-B 2008, Proceedings of the International Conference on e-Business",
(2008),
ISBN: 978-989-8111-58-6;
285
- 291.
-
G. Liedl et al.:
"Carbon dioxide laser and diode laser dispersing of TiC-Powder into aluminium substrates";
Talk: CLEO/IQEC,
Nice/France;
2000-09-10
- 2000-09-15; in: "Proceedings CLEO/IQEC",
(2000).
More information
-
G. Liedl et al.:
"Excimer Laser Alloying of TiC Layer with the Steel Plate, ";
Talk: Laser Material Processing,
Opatija/Croatia;
1995-06-01
- 1996-06-03; in: "Proceedings Int. Conf. on Laser Material Processing",
(1995),
953-946459-0-5;
183
- 195.
-
G. Liedl et al.:
"Laser Assisted Joining of Dissimilar Materials";
Talk: IQCMEA-ICF - Processing, Performance and Failure Analysis of Engineering Materials,
Luxor, Egypt;
2011-11-14
- 2011-11-17; in: "Proceedings IQCMEA-ICF - Processing, Performance and Failure Analysis of Engineering Materials",
A. El-Batahgy, M. Waly (ed.);
(2011),
22
- 31.
More information
-
G. Liedl, H. Koch, A. Otto:
"Fügen mit Laserstrahlung";
Talk: Fügetechnik in Österreich,
Graz (invited);
2013-04-10; in: "Fügetechnik in Österreich",
N. Enzinger (ed.);
Schweiss- und Prüftechnik,
(2013),
36
- 40.
More information
-
G. Liedl, A. Kratky, D. Schuöcker:
"Laser assisted shaping of metallic sheets and wires - a promising new application of high power lasers";
Talk: SPIE Conf. on High Power Laser Ablation IV-HPLA,
Taos, New Mexico/USA (invited);
2002-04-22
- 2002-04-26; in: "High Power Laser Ablation IV Vol. 4760",
4760
(2002),
ISBN: 0-8194-4524-x;
633
- 644.
More information
-
G. Liedl, R. Pospichal:
"FE-simulation of laser assisted joining of aluminum-steel";
Talk: High Power Laser Systems & Applications,
Istanbul, Turkey;
2012-09-10
- 2012-09-14; in: "XIX International Symposium on High-Power Laser Systems and Applications 2012",
K. Allakhverdiev (ed.);
SPIE,
8677
(2012).
More information
-
G. Liedl, R. Pospichal:
"Simulation of laser multi-beam interference patterns for nanostructuring of materials";
Talk: COMEC 2012,
Cayo Santa Maria, Cuba;
2012-11-05
- 2012-11-08; in: "COMEC VII Conferencia Internacional de Ingenieria Mechánica",
(2012),
ISBN: 978-959-250-757-9;
10 pages.
More information
-
G. Liedl, D. Schuöcker:
"Dieless wire drawing with lasers";
Talk: International Conference on Lasers, Applications, and Technologies 2007,
Minsk, Belarus;
2007-05-28
- 2007-06-01; in: "Proceedings SPIE",
SPIE,
6735
(2007),
ISSN: 0277-786x;
444
- 450.
More information
-
G. Liedl, D. Schuöcker et al.:
"Laser induced ignition of gasoline direct injection engines";
Talk: GCL/HPL,
Prague (invited);
2004-08-30
- 2004-09-03; in: "Proceedings SPIE",
SPIE,
5777
(2004),
ISBN: 0-8194-5760-4;
955
- 960.
More information
-
G. Liedl, D. Schuöcker, B. Geringer, J. Graf et al.:
"Laser induced ignition";
Talk: GCL/HPL,
Gmunden, Austria (invited);
2006-09-04
- 2006-09-08; in: "Proceedings SPIE",
SPIE,
(2006),
1
- 6.
More information
-
G. Liedl, D. Schuöcker, E. Kny:
"Rapid Prototyping with Lasers using Metal Powder Jets";
Talk: Proceedings of SPIE,
Moskau (invited);
2002-06-22
- 2002-06-28; in: "Laser Processing of Advanced Materials and Laser Microtechnologies",
SPIE,
5121
(2002),
ISBN: 0-8194-4981-4;
399
- 405.
More information
-
B. Ljoljic, B. Buchmeister, B. Katalinic:
"Strategic Planning as a Factor of Success in a Competitive Environment";
Talk: 14th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Focus on Reconstruction and Development',
Sarajevo (invited);
2003-10-22
- 2003-10-25; in: "DAAAM International Scientific Book 2003",
B. Katalinic (ed.);
DAAAM International Vienna,
Vienna
(2003),
ISBN: 3-901-509-36-4;
359
- 366.
-
B. Ljoljic, B. Katalinic, V. Kordic:
"Choices and Phases in Strategic Management";
Talk: 3rd DAAAM International Workshop "Intelligent Manufacturing Systems",
Kosice, Slovak Republic;
2001-11-29; in: "Proceeding of 3rd DAAAM International Workshop - Intelligent Manufacuring Systems",
DAAAM International Vienna,
Vienna
(2001),
ISBN: 3-901509-31-3;
45
- 46.
-
B. Ljoljic, B. Katalinic, V. Kordic:
"Strategical Planning as a Factor for Seccessful Business";
Talk: 12th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Focus on Precision Engineering,
Jena, Germany;
2001-10-24
- 2001-10-27; in: "Proceeding of 12th DAAAM International Symposium - Intelligent Manufacturing & Automation: Focus on Precision Engineering",
B. Katalinic (ed.);
DAAAM International Vienna,
Vienna
(2001),
ISBN: 3-901509-19-4;
273
- 274.
-
B. Ljoljic, B. Katalinic, K. Stuja, V. Kordic:
"Simulation of Flexible Assembly System for Electrical Motors";
Talk: 3rd International Conference of DAAAM National Estonia "Industrial Engineering - New Challenges to SME,
Tallin, Estonia;
2002-04-25
- 2002-04-27; in: "Proceedings of 3rd International Conference: Industrial Engineering - New Challanges to SME",
J. Papstel et al. (ed.);
(2002),
ISBN: 9985-59-272-7;
108
- 111.
-
B. Ljoljic, B. Katalinic, K. Stuja, V. Kordic, M. Stopper:
"Performance Evaluation of Flexible Assembly System for Electrical Motors";
Talk: 13th DAAAM International Symposium,
Vienna, Austria;
2002-10-23
- 2002-10-26; in: "Proceeding of 13th DAAAM International Symposium",
B. Katalinic (ed.);
DAAAM International Vienna,
Vienna
(2002),
ISBN: 3-901509-19-4;
317
- 318.
-
B. Ljoljic, B. Katalinic, K. Stuja, M. Stopper:
"Evaluation of Performance of Compley Flexible Assembly System";
Talk: 4th Workshop "Human Factor and Environmentalist",
Kosice, Slovakia;
2002-11-05; in: "Proceedings of the 4th Workshop 'Human Factor and Environmentalist'",
B. Katalinic, E. Wessely (ed.);
DAAAM International Vienna,
Vienna
(2002),
ISBN: 3-901509-37-2;
63
- 64.
-
V. Malisa, B. Katalinic:
"Next Generation of Production Systems: Original Concept of Selforganizing Production Systems";
Talk: Eight International Conference on Manufacturing & Management,
Gold Coast, Queensland, Australia (invited);
2004-12-08
- 2004-12-10; in: "Eight International Conference on Manufacturing Management Proceedings",
(2004),
ISBN: 0-9578296-1-2;
1
- 14.
-
S. Mansour Fallah, S. Wolny, M. Wimmer:
"Towards model-integrated service-oriented manufacturing execution system";
Talk: 1st International Workshop on Cyber-Physical Production Systems (CPPS),
Vienna;
2016-04-12; in: "Proceedings of the 1st International Workshop on Cyber-Physical Production Systems (CPPS)",
(2016),
1
- 5.
More information
-
S. Mansour, T. Trautner, F. Pauker:
"Integrated tool lifecycle";
Talk: 12th CIRP Conference on Intelligent Computation in Manufacturing Engineering,
Italien (invited);
2018-07-18
- 2018-07-20; in: "Procedia CIRP",
Elsevier,
(2018).
-
P Masset, F. Bleicher, L. Bortolotto, G. Geiger:
"Improvement of the Resistance of Titanium Aluminides to Environmental Embrittlement";
Talk: PRIME 2012, 222nd Meeting of ECS,
Honolulu (invited);
2012-10-07
- 2012-10-12; in: "222nd Meeting of ECS",
(2012).
-
M. Messner, G. Mauthner, F. Pauker, T. Frühwirth, J. Mangler:
"Closed Loop Cycle Time Feedback to Optimize High-Mix / Low-Volume Production Planning";
Talk: 52nd CIRP Conference on Manufacturing Systems,
Ljubljana, Slovenia;
2019-06-12
- 2019-06-14; in: "Proceedings of the 52nd CIRP Conference on Manufacturing Systems (CIRP-CMS 2019)",
(2019),
689
- 694.
More information
-
M. Meunier, A. Otto, R. Gómez Vázquez, J. Arias, R. Fernández, G. Pallier, P. Jian, O. Pinel, G. Labroille:
"Freeform Beam Shaping with Multi-Plane Light Conversion for 1.07µm Ultra-High Throughput Laser-Based Material Macroprocessing";
Talk: International Congress on Applications of Lasers & Electro-Optics ICALEO 2019,
Orlando, USA;
2019-10-07
- 2019-10-10; in: "Proceedings of ICALEO 2019",
(2019),
Paper ID # 0339_0501_000175,
8 pages.
-
T. Mierer, F. Bleicher:
"Partikelmessung und Reinraumsimulation";
Talk: Reinraumtechniktag 2008,
Austria Trend Hotel "Savoyen";
2008-10-09
- 2009-10-09; in: "Reinraumtechniktag 2008",
F. Bleicher (ed.);
(2008).
More information
-
T. Mikats, S. Krall, F. Bleicher:
"Experimental Investigation of Material Damping in Polymer Concrete and Welded Steel Parts for Machine Tool Quills";
Poster: 30th DAS Symposium on Advances in Experimental Mechanics,
Primosten (invited);
2013-09-25
- 2013-09-28; in: "30th DAS Symposium on Advances in Experimental Mechanics",
Croation Society of Mechanics,
Zagreb
(2013),
ISBN: 978953753917-7;
230
- 231.
-
H.-C. Möhring, C. Brecher, E. Abele, J. Fleischer, F. Bleicher:
"Materials in machine tool structures";
Keynote Lecture: 65th The International Academy for Production Engineering General Assembly,
Cape Town, SA;
2015-08-23
- 2015-08-29; in: "65th CIRP Proceedings",
(2015),
725
- 749.
-
B. Mörzinger, C. Loschan, F. Kloibhofer, F. Bleicher:
"A modular, holistic optimization approach for industrial appliances";
Talk: 12th CIRP Conference on Intelligent Computation in Manufacturing Engineering,
Italien (invited);
2018-07-18
- 2018-07-20; in: "Procedia CIRP",
Elsevier,
(2018),
551
- 556.
-
B. Mörzinger, M. Obermair, I. Leobner, P. Smolek, B. Heinzl, A. Wittmann, F. Bleicher:
"Data-Based Modelling, Simulation And Optimization Of The Operation Of Production Plants";
Poster: 2nd Vienna young Scientists Symposium,
Wien (invited);
2016-06-09
- 2016-06-10; in: "VSS",
H. Krebs (ed.);
(2016),
ISBN: 978-3-9504017-2-1;
86
- 87.
More information
-
B. Mörzinger, T. Weiler, T. Trautner, I. Ayatollahi, B. Angerer, B. Kittl:
"A large-scale Framework for Storage, Access and Analysis of Time Series Data in the Manufacturing Domain";
Talk: 11th CIRP Conference on Intelligent Computation in Manufacturing Engineering - CIRP ICME '17,
Iscia, Italien (invited);
2017-07-19
- 2017-07-21; in: "Cirp Icme 17",
(2017),
ISSN: 2212-8271.
-
S. Murzin, N. Kazanskiy, G. Liedl, R. Bielak, A. Melnikov, S Osipov:
"Study of structure of dual phase steel after laser heat treatment using moving distributed surface heat sources";
Talk: 2020 International Conference on Information Technology and Nanotechnology (ITNT),
Samara;
2020-05-26
- 2020-05-29; in: "Proceedings",
IEEE (ed.);
IEEE,
(2020),
ISBN: 978-1-7281-7041-1.
More information
-
S. Murzin, N. Kazanskiy, G. Liedl, A. Otto, R. Bielak:
"Laser beam shaping for modification of materials with ferritic-martenistic structure";
Talk: 3rd International Conference Information Technology and Nanotechnology, ITNT,
Samara, RF;
2017-04-25
- 2017-04-27; in: "Procedia Engineering",
Elsevier,
201
(2017),
164
- 168.
More information
-
S. Murzin, G. Liedl, R. Pospichal, A. Melnikov:
"Study of the action of a femtosecond laser beam on samples of a Cu-Zn alloy";
Talk: The IV International Conference on Information Technology and Nanotechnology,
Samara;
2018-04-24
- 2018-04-27; in: "The IV International Conference on Information Technology and Nanotechnology",
Journal of Physics: Conference Series IOP,
1096
(2018),
Paper ID 012138,
6 pages.
More information
-
C. Neamtu, L. Crisan, D. Popescu, M.N. Durakbasa:
"Modern Instruments for Teaching Coordinate Metrology";
Talk: IXth INTERNATIONAL SCIENTIFIC CONFERENCE Coordinate Measuring Technique,
Ustron;
2010-04-14
- 2010-04-16; in: "Advances in Coordinate Metrology",
Wydawnictwo Akademii Techniczno-Humanistycznej W Bielsku-Bialej,
I Bielsko-Biala
(2010),
ISBN: 978-83-62292-56-1;
349
- 358.
-
M. Nirtl, J. Hauck, F. Bleicher:
"Motion Deviations of a Rotational Positioning Table induced by Thermal Effects";
Poster: 34th Danubia-Adria Symposium on Advances in Experimental Mechanics,
University of Trieste, Italy (invited);
2017-09-19
- 2017-09-22; in: "DAS2017",
(2017),
ISBN: 978-88-8303-863-1.
-
N. Nomak Akdogan, M.N. Durakbasa, P.H. Osanna, M.E. Yurci:
"HIGH PRECISION DETERMINATION AND STATISTICAL EVALUATION OF SURFACE ROUGHNESS ALTERATIONS OF SELECTED MATERIALS";
Talk: IMEKO XVIII World Congress,
Rio de Janeiro;
2006-09-17
- 2006-09-22; in: "METROLOGY FOR A SUSTAINABLE DEVELOPMENT",
LETRA CAPITAL EDITORA,
Rio de Janeiro, Brasilien
(2006),
#.
-
N. Nomak Akdogan, M.N. Durakbasa, P.H. Osanna, M.E. Yurci:
"Identifying Mould Surface Texture Parameters Experimentally with the Help of Precision Measurement Techniques";
Talk: ICPM 2005 Proceedings,
Wien;
2005-10-18
- 2005-10-19; in: "III. INTERNATIONAL CONGRESS OF PRECISION MACHINING",
A. Afjehi-Sadat, M.N. Durakbasa, P.H. Osanna (ed.);
(2005),
ISBN: 3-901-888-31-4;
49
- 55.
-
M. Obermair, A. Steininger, F. Bleicher:
"Experimental Determination of Cutting Forces in Hard Tuning Operations";
Poster: 30th DAS Symposium on Advances in Experimental Mechanics,
Primosten (invited);
2013-09-25
- 2013-09-28; in: "30th DAS Symposium on Advances in Experimental Mechanics",
Croation Society of Mechanics,
Zagreb
(2013),
ISBN: 978953753917-7;
209
- 210.
-
K. Orehounig, A. Mahdavi, I. Kovacic, A. Dimitriou, C. Dorn, F. Bleicher:
"Concurrent consideration of production processes and building properties for the design of energy-efficient industrial facilities";
Talk: IBPC 2012 - 5th International Building Physics Conference,
Kyoto, Japan;
2012-05-28
- 2012-05-31; in: "Proceedings of the 5th Internaltional Building Physics Conference",
IBPC organizing committee (ed.);
Organizing Committee of the 5th IBPC.,
1/1/Kyoto, Japan
(2012),
875
- 881.
More information
-
P.H. Osanna:
"Geometrische Produktspezifikation und Verifikation, Toleranzen, Messgeräte, Werkstükmesstechnik";
Keynote Lecture: Kvalita a GPS 2005,
Brno, CZ;
2005-09-20
- 2005-09-21; in: "Kvalita a GPS 2005",
(2005),
ISBN: 80-214-3033-8;
9
- 12.
-
P.H. Osanna:
"The Fundamental Influence of Education, Training and Certification of Persons Working in Metrology in Industry";
Keynote Lecture: Metrology in Production Engineering,
Augustow, PL;
2007-09-19
- 2007-09-21; in: "METROLOGIA W TECHNIKACH WYTWARZANIA",
(2007),
143
- 151.
-
P.H. Osanna, M.N. Durakbasa:
"Artificial Intelligence based Measurement Systems Monitoring and Supervision";
Talk: Symposium Digest,
Cavtat, HR;
2001-10-08
- 2001-10-10; in: "HMD 18th Metrology Symposium",
(2001),
ISBN: 953-96093-5-6;
4 pages.
-
P.H. Osanna, M.N. Durakbasa:
"Concept for Computer Aided Non-contact Laser Roughness Evaluation of Engineering Surfaces";
Talk: Tagung,
Novosibirsk;
2002-09-12
- 2002-09-17; in: "Laser Metrology Applied to Science, Industry and Everyday Life - LM-2002",
SPIE Proceedings, Volume 4900,
1
(2002),
ISBN: 0-8194-4686-6;
708
- 714.
-
P.H. Osanna, M.N. Durakbasa:
"Geometrical Product Specification and Verification (GPS) for the Analytical Description and Evaluation of Technical Structures of any Kind";
Talk: ISO TC 4 Symposium,
Wien;
2008-09-09; in: "Rolling bearings TC 4 meets GPS TC 213",
H. Wiesner (ed.);
Austrian Standards plus Publishing ON-V,
1/41/Wien
(2008),
ISBN: 978-3-85402-167-4;
49
- 55.
-
P.H. Osanna, M.N. Durakbasa:
"Improvements of Process and Product Quality in Modern Industry, for Every-Day-Life and Bio-Medicine on Basisi of Nanometrology and Nanotechnology";
Keynote Lecture: Proceedings ICPM 2007 - IV. International Congress on Precision Machining,
Sandomierz, PL;
2007-09-25
- 2007-09-27; in: "ICPM 2007",
S. Adamczak et al. (ed.);
Kielce University of Technology,
Kielce, Poland
(2007),
ISBN: 978-83-88906-91-6;
13
- 21.
-
P.H. Osanna, M.N. Durakbasa:
"Nano metrology as sophisticated metrology in research laboratories and in future industrial quality control laboratories";
Keynote Lecture: Proceedings CAMET-JM 2006,
Casablanca, Marocco;
2006-04-04
- 2006-04-06; in: "Proceedings CAMET-JM 2006",
(2006).
-
P.H. Osanna, M.N. Durakbasa:
"Teaching in Quality Science and High Quality Teaching Processes for Higher Education";
Talk: Graficke Studio,
Bratislava, SK;
2001-03-08; in: "Metrological Aspects of the Quality Assurance - Accreditation and Certification in New Millenium",
(2001),
ISBN: 80-968449-6-2;
117
- 121.
-
P.H. Osanna, M.N. Durakbasa:
"THE IMPORTANCE OF NANOMETROLOGY FOR IMPROVING THE PRODUCT QUALITY IN MODERN INDUSTRY";
Keynote Lecture: Middle East Measurement and Instrumentation 2006,
Bahrain;
2006-05-29
- 2006-05-31; in: "3rd Middle East Metrology Conference and Exhibition",
(2006),
1
- 15.
-
P.H. Osanna, M.N. Durakbasa, A. Afjehi-Sadat:
"Modern Production Metrology as Basis of Quality Control and Quality Assurance for the Industry of the 21st Century";
Talk: Tagungsband,
Krakow;
2003-09-25
- 2003-09-27; in: "Metrology in Production Engineering",
II / Krakow
(2003),
ISBN: 83-7242-270-2;
457
- 474.
-
P.H. Osanna, M.N. Durakbasa, A. Afjehi-Sadat:
"Nanotechnologie und Nanometrologie in Maschinenbau und Biomedizin";
Talk: ÖVE - Schriftenreihe,
Wien;
2003; in: "BEITRÄGE DER INFORMATIONSTAGUNG MIKROELEKTRONIK 2003",
Eigenverlag des Österreichischen Verbandes für Elektrotechnik,
33
(2003),
ISBN: 3-85133-030-7;
19
- 27.
-
P.H. Osanna, M.N. Durakbasa, A. Afjehi-Sadat:
"The Role of Life Cycle Engineering and Modern Metrology for Quality Management Systems in Industry";
Talk: 11th International CIRP Life Cycle Engineering Seminar ",
Beograd;
2004-06-20
- 2004-06-22; in: "Product Life Cycle - Quality Management Issues",
(2004),
ISBN: 86-903197-4-3;
10 pages.
-
P.H. Osanna, M.N. Durakbasa, A. Afjehi-Sadat, J.M. Bauer:
"Artificial Intelligence and Information Technology to Support Measurement Technique in Modern Production Plants";
Talk: First International IEEE Symposium,
Varna;
2002-09-10
- 2002-09-12; in: "Intelligent Systems",
IEEE,
Volume 1
(2002),
ISBN: 0-7803-7134-8;
17
- 23.
More information
-
P.H. Osanna, M.N. Durakbasa, J.M. Bauer, L. Kräuter:
"Global International Cooperation of Collaborating Small and Medium Sized Enterprises to Achieve Total Quality Management";
Talk: Proceedings Fourth International Working Conference,
Belgrad;
2007-05-27
- 2007-05-30; in: "Total Quality Management - Advanced and Intelligent Approaches",
V. Majstorovic (ed.);
(2007),
ISBN: 978-86-7083-594-8;
1
- 6.
-
P.H. Osanna, M.N. Durakbasa, M. Blaim:
"Quality Management at the University";
Talk: Proceedings of The 4th International Seminar on the Quality Management in Higher Education,
Sinaia, Romania;
2006-06-09
- 2006-06-10; in: "QUALITY MANAGEMENT IN HIGHER EDUCATION",
Performantica 2006,
Iasi
(2006),
ISBN: 973-730-225-7;
135
- 140.
-
P.H. Osanna, M.N. Durakbasa, L. Kräuter:
"Developments in Technology, Sustainability and Medical Engineering on the Basis of Precision and Nano Metrology";
Talk: The 1st Korean-Austrian Automation Day,
Changwon, Korea;
2006-05-11
- 2006-05-13; in: "Automation and Mechatronics",
(2006),
111
- 152.
-
P.H. Osanna, M.N. Durakbasa, L. Kräuter:
"Education of Metrologists as Qualified Personnel in Austria";
Talk: Tagungsband Zhromeadenia KZ SR,
Strbske Pleso;
2006-10-16
- 2006-10-17; in: "Sammelwerk der XXV. Tagung für Metrologie",
(2006),
39
- 45.
-
P.H. Osanna, M.N. Durakbasa, L. Kräuter:
"Entwicklungstendenzen in der Längenmesstechnik für die Qualitätskontrolle";
Keynote Lecture: 18. mezinarodni seminar,
Plzen - Czech Republic;
2009-03-18
- 2009-03-19; in: "Merici technika pro kontrolu jakosti",
Ceska metrologicka spolecnost,
Ko 417-09, Plzen
(2009),
97
- 113.
-
P.H. Osanna, M.N. Durakbasa, L. Kräuter:
"Produktionsmesstechnik und Qualitätsmanagement - Messung der Qualität - Qualität der Messung";
Keynote Lecture: Tagungsband,
Plzen;
2007-03-13
- 2007-03-14; in: "MERICI TECHNIKA PRO KONTROLU JAKOSTI",
Technicky Tydenik,
S 380 - 07, Praha
(2007),
139
- 144.
-
P.H. Osanna, M.N. Durakbasa, L. Kräuter:
"PRODUKTIONSMESSTECHNIK VOM BLICKPUNKT DER INTERNATIONALEN QUALITÄTSMANAGEMENTNORMEN EN/ISO 9000:2000 AUS GESEHEN";
Keynote Lecture: MERICI TECHNIKA PRO KONTROLU JAKOSTI,
PLZEN;
2006-03-01
- 2006-03-02; in: "Proceedings",
(2006),
7
- 22.
-
P.H. Osanna, M.N. Durakbasa, L. Kräuter:
"Quality and Quality Assurance in European Higher Education";
Keynote Lecture: International Conference on QUALITY - INNOVATION - EUROPEAN INTEGRATION,
Sibiu, RO;
2008-09-18
- 2008-09-20; in: "QIEI 2008",
I. Rosca, A. Weckenmann, P.H. Osanna, S. Popescu, M. Olaru, C. Paunescu (ed.);
(2008),
3 901888 41 3.
-
P.H. Osanna, M.N. Durakbasa, L. Kräuter:
"VZDELAVANIE METROLOGOV AKO KVALIFIKOV ANEHO PERSONALU RAKUSKU";
Talk: XXV. ZHROMAZDENIA KZ SR,
Strbske Pleso, SK;
2006-10-16
- 2006-10-17; in: "ZBORNIK PREDNASOK ZO SEMINARA",
(2006),
46
- 52.
-
P.H. Osanna, M.N. Durakbasa, L. Kräuter, E. Güclü:
"A Modern Scheme for Education, Training and Certification";
Keynote Lecture: MEASUREMENT SCIENCE REVIEW,
SK;
2007-05-20
- 2007-05-24; in: "MEASUREMENT SCIENCE REVIEW 2007",
(2007),
ISBN: 978-80-969672-0-9;
3
- 9.
-
P.H. Osanna, M.N. Durakbasa, N. Nomak Akdogan, A. Bauer, L. Kräuter:
"Intelligent Metrology and total Quality Management for the Realisation of Advanced Flexible Disassembly and Recyling of Used Goods for Everyday Life";
Keynote Lecture: Tagungsband,
Senec, SK;
2007-06-26
- 2007-06-28; in: "TOP 2007 - ENGINEERING OF ENVIRONMENT PROTECTION",
Publishing House of Slovak University of Technology,
Bratislava, Slovak Republic
(2007),
ISBN: 978-80-227-2693-1;
257
- 262.
-
P.H. Osanna, M.N. Durakbasa, D. Prostrednik:
"Qualitätsmanagement zur Verbesserung der Qualität der universitären Ausbildung";
Talk: Quality Management "95",
Brno;
1995-06-15; in: "Quality Management "95"",
A. Fiala (ed.);
Nadace NEJ - EQF Brno,
Brno
(1995),
70
- 74.
-
P.H. Osanna, M.N. Durakbasa, H. Tahirova:
"END OF LIFE MANAGEMENT AND RECYCLING IN THE CAR INDUSTRIES";
Talk: IN-TECH-ED 2005,
Baku;
2005-06-01
- 2005-06-03; in: "PROCEEDINGS OF THE EIGHT BAKU INTERNATIONAL CONGRESS "ENERGY, ECOLOGY, ECONOMY"",
(2005),
673
- 677.
More information
-
P.H. Osanna, M.N. Durakbasa, H. Tahirova:
"TQM and Environmental Management Supported by Semi Automated Disassembly";
Talk: International Conference Modern Technologies in Manufacturing,
Cluj-Napoca, RO;
2005-10-06
- 2005-10-08; in: "ANNALS OF MTeM FOR 2005 & PROCEEDINGS",
(2005),
ISBN: 973-9087-83-3;
313
- 316.
-
P.H. Osanna, M.N. Durakbasa, H. Tahirova, I. Cavusoglu:
"END OF LIFE MANAGEMENT AND RECYCLING IOF USED PRODUCTS IN THE EUROPEAN INDUSTRIES";
Keynote Lecture: Tagungsband TOP 2005,
Casta Papiernicka - SK;
2005-06-30
- 2005-07-01; in: "TOP 2005",
(2005),
ISBN: 80-227-2249-9;
II-1
- II-7.
-
P.H. Osanna, M.N. Durakbasa, K. Yaghmaei, A. Afjehi-Sadat:
"NANOMETROLOGY - TODAY IN SCIENTIFIC HIGH TECHNOLOGY DEVELOPMENT AND RESEARCH LABORATORIES - TOMORROW IN QUALITY CONTROL DEPARTMENTS OF MODERN PRODUCTION PLANTS";
Talk: Proceedings of the IMEKO TC 11 Metrological Infrastructure,
Opatija, Kroatien;
2005-09-26
- 2005-09-28; in: "19th International Metrology Symposium",
Metrology Consulting,
450916045/Zagreb
(2005),
ISBN: 953-95179-0-7;
149
- 155.
-
P.H. Osanna, H. Weseslindtner, M.N. Durakbasa, A. Afjehi-Sadat:
"Intelligent Metrology, Quality Assurance and Quality Management as Basis for Technical Diagnostics in Global Competitive Production";
Talk: Proceedings of the 10th IMEKO TC10 International Conference,
Budapest, Hungary;
2005-06-09
- 2005-06-10; in: "10th IMEKO TC10 International Conference on Technical Diagnostics",
(2005),
ISBN: 9638658649;
81
- 86.
-
P.H. Osanna, H. Weseslindtner, M.N. Durakbasa, H. Tahirova, A. Afjehi-Sadat:
"TQM, LCA and Sustainability in European Industry Supported by Intelligent Flexible Disassembly and Recycling of Used Products";
Talk: IN-TECH-ED 2005,
Budapest;
2005-09-08
- 2005-09-09; in: "Innovation-Technics-Education",
BUDAPEST TECH,
(2005),
ISBN: 9639397067;
312
- 318.
-
A. Otto, R. Gómez Vázquez:
"Fluid Dynamical Simulation of High Speed Micro Welding";
Talk: ICALEO 2017,
Atlanta, USA (invited);
2017-10-26
- 2017-10-27; in: "2017 ICALEO Conference Proceedings (online)",
Journal of Laser Applications,
30/032411
(2018),
ISBN: 9781940168142;
Paper ID M601,
9 pages.
More information
-
A. Otto, R. Gómez Vázquez, U. Hartel, S. Mosbah:
"Numerical analysis of process dynamics in laser welding of Al and Cu";
Talk: 10th CIRP Conference on Photonic Technologies [LANE 2018],
Fürth, Germany;
2018-09-03
- 2018-09-06; in: "Procedia CIRP",
Procedia CIRP /,
74
(2018),
ISSN: 2212-8271;
691
- 695.
More information
-
A. Otto, H. Koch, R. Gómez Vázquez et al.:
"Multiphysical Simulation of ns-Laser Ablation of Multi-material LED-structures";
Talk: LANE 2014,
Fürth (Deutschland);
2014-09-08
- 2014-09-11; in: "8th International Conference on Laser Assisted Net Shape Engineering LANE 2014",
Physics Procedia / Elsevier,
Volume 56
(2014),
ISSN: 1875-3892;
10 pages.
More information
-
F. Pauker, I. Ayatollahi, B. Kittl:
"OPC UA for machine tending industrial robots";
Talk: 2nd International Conference On Advances In Robotics Engineering - AMRE 2014,
Zürich (invited);
2014-10-25
- 2014-10-26; in: "Proc. of the 2nd Intl. Conf. on Advances In Robotics Engineering",
(2014),
ISBN: 978-1-63248-031-6;
79
- 83.
-
F. Pauker, T. Frühwirth, B. Kittl, W. Kastner:
"A systematic approach to OPC UA information model design";
Talk: 49th CIRP Conference on Manufacturing Systems,
Stuttgart (invited);
2016-05-25
- 2016-05-27; in: "Procedia CIRP",
ELSEVIER,
(2016).
-
F. Pauker, S. Wolny, S. Mansour Fallah, M. Wimmer:
"UML2OPC-UA - Transforming UML class diagrams to OPC UA information models";
Talk: 11th CIRP Conference on Intelligent Computation in Manufacturing Engineering,
Gulf of Naples, Italy;
2017-07-19
- 2017-07-21; in: "Proceedings of 11th CIRP Conference on Conference on Intelligent Computation in Manufacturing Engineering",
Proceedings of the 11th CIRP Conference on Intelligent Computation in Manufacturing Engineering,
(2017),
ISSN: 2212-8271;
1
- 6.
-
R. Petkovsek, V. Agrez, F. Bammer:
"Gain-Switching of a Fiber Laser: Experiment and a Simple Theoretic Model";
Talk: Photonics Europe 2010,
Brüssel;
2010-04-12
- 2010-04-16; in: "Solid State Lasers and Amplifiers IV, and High-Power Lasers",
SPIE Proceedings,
Vol. 7721
(2010),
ISBN: 978-0-8194-8194-8;
77210L-1
- 77210L-6.
More information
-
K. Pfadenhauer, S. Dustdar, B. Kittl:
"Challenges and Solutions for Model Driven Web Service Composition";
Talk: 3rd International Workshop on Distributed and Mobile Collaboration (DMC),
Linköping, Schweden;
2005-06-13
- 2005-06-15; in: "3rd International Workshop on Distributed and Mobile collaboration (DMC)",
IEEE Computer Society,
(2005).
More information
-
K. Pfadenhauer, S. Dustdar, B. Kittl:
"Comparison of Two Distinctive Model Driven Web Service Orchestration Proposals";
Talk: Seventh IEEE International Conference on E-Commerce Technology Workshops,
München (invited);
2005-07-19; in: "Workshops of CEC 2005 Seventh IEEE International Conference on E-Commerce Technology Workshops",
IEEE Computer Society Press,
(2005),
ISBN: 0-7695-2384-6;
29
- 36.
More information
-
K. Pfadenhauer, B. Kittl:
"Flexibility in the Shop Floor by Means of a Model Driven Architecture";
Talk: 15th International DAAAM Symposium,
Vienna;
2004-11-03
- 2004-11-06; in: "Annals of DAAAM for 2004 & Proceedings of the 15th International DAAAM Symposium",
B. Katalinic (ed.);
DAAAM Inernational Vienna,
(2004),
ISBN: 3-901509-42-9;
353
- 354.
More information
-
K. Pfadenhauer, B. Kittl:
"Modeling the shop floor for a SOA with UML";
Talk: 1st International Conference on Enterprise Systems and Accounting,
Thessaloniki;
2004-09-03
- 2004-09-04; in: "Proceedings of the 1st International Conference on Enterprise Systems and Accountimg",
(2004),
17 pages.
More information
-
K. Pfadenhauer, B. Kittl:
"Why model driven service orientation is the future of shop floor integration";
Talk: Comment 2005 Worldwide Congress on Materials and Manufacturing Engineering and Technology,
Gliwice (invited);
2005-05-16
- 2005-05-19; in: "Comment 2005 Worldwide Congress on Materials and Manufacturing Engineering and Technology",
(2005),
4 pages.
More information
-
K. Pfadenhauer, B. Kittl, S. Dustdar:
"Shop Floor Information Management and SOA";
Talk: BPM 2006,
Wien, Österreich;
2006-09-04; in: "Business Process Management Workshops",
S. Dustdar, J. Eder (ed.);
Springer,
LNCS 4103
(2006),
ISBN: 3-540-38444-8;
237
- 248.
More information
-
K. Placko, B. Katalinic:
"Position or Speed Control of Hydraulic Actuators of Industrial Robots";
Talk: 2nd Yugoslav Symposium on Applied Robotics,
Portoroz;
1981-06-15
- 1981-06-17; in: "Proc. 2nd Yugoslav Symposium on Applied Robotics",
(1981),
309
- 311.
-
M. Plancak, D. Movrin, Z. Car, M.N. Durakbasa, D. Vilotic:
"Orbital Forging of Cross Joint Component";
Keynote Lecture: International Conference on Innovative Technologies,
Budapest;
2013-09-10
- 2013-09-13; in: "IN-TECH2013",
Z. Car, J. Kudlacek, T. Szalay (ed.);
Tiskara Susak d.o.o.,
1
(2013),
ISBN: 978-953-6326-88-4;
265
- 268.
-
M. Plancak, D. Movrin, I. Kacmarcik, A. Ivanisevic, M. Tolnay, M.N. Durakbasa:
"Manufacturing Of Vital Parts By Rotary Forging";
Talk: 2nd International Conference "NEW TECHNOLOGIES NT-2015" Development and Application,
Mostar - Bosnien und Herzegowina;
2015-04-24
- 2015-04-25; in: "Proceedings - Zbornik New Technologies "NT-2015"",
Society for Robotics of Bosnia and Herzegovina,
1
(2015),
ISSN: 2303-5668;
104
- 108.
More information
-
P. Pongratz, G. Liedl et al.:
"TEM and SIMS study of silicon implanted with phosphorus and boron";
Talk: Proc. of the Royal Microscopical Society Conference,
Bristol/UK;
1989; in: "Proc. of the Royal Microscopical Society Conference",
(1989),
513
- 518.
-
R. Pospichal, R. Bielak, G. Liedl:
"SCWTEX - Simultaneous Cutting and Welding of Textiles";
Talk: MOTSP 2011,
Bol, Island Brac;
2011-06-08
- 2011-06-10; in: "Proceedings of the 3rd International Scientific Conference Management of Technology Step to Sustainable Production",
(2011),
ISBN: 978-953-7738-10-5;
368
- 374.
More information
-
R. Pospichal, G. Liedl:
"Fabrication of Periodic Nanostructures by Multi-Beam Interference Using an Ultra-Short Pulse Laser";
Talk: MOTSP 2012,
Zadar, Kroatien;
2012-06-14
- 2012-06-16; in: "MOTSP 2012 - Proceedings of the 4th International Scientific Conference Management of Technology Step to Sustainable Production",
Croatian Association for PLM,
4
(2012),
ISSN: 1847-6880;
328
- 335.
More information
-
R. Pospichal, G. Liedl:
"Laser Processing Of Non-Woven Fabrics";
Talk: Management of Technology - Step to Sustainable Production: MOTSP2013,
Novi Vinodolski, Croatia;
2013-05-29
- 2013-05-31; in: "MOTSP 2013 - Conference Proceedings",
Croatian Association for PLM,
Zagreb, Croatia
(2013),
ISSN: 1848-9591;
Paper ID 169,
8 pages.
More information
-
R. Pospichal, G. Liedl, J. Kremser, A. Bonilla:
"Possibilities And Limitations Of Weld Seam Tracking In Laser Welding";
Talk: 7th International Scientific Conference Management of Technology - Step to Sustainable Production,
Brela, Makarska, Croatia;
2015-06-10
- 2015-06-12; in: "Conference Proceedings - 7th International Scientific Conference Management of Technology - Step to Sustainable Production",
Croatian Association for PLM,
(2015),
ISSN: 1849-7586;
Paper ID 169,
9 pages.
More information
-
M. Prießnitz:
"Symposium Mechanical Surface Treatment 2019";
Talk: Symposium Mechanical Surface Treatment 2019,
Karlsruhe (invited);
2019-10-22
- 2019-10-23; in: "8th Workshop Machine Hammer Peening",
(2019),
122
- 134.
More information
-
M. Rahmani, F. Bleicher:
"Experimental and Analytical Investigations on Normal and Angular Stiffness of linear guides in manufacturing systems";
Talk: 48th Conference on Manufacturing Systems,
Neapel (invited);
2015-06-23
- 2015-06-26; in: "48th Conference on Manufacturing Systems",
Procedia Cirp - Journal,
(2015),
ISSN: 2212-8271;
4 pages.
-
M. Rahmani, F. Bleicher:
"Experimental and numerical studies of the influence of geometric deviations in the performance of machine tools linear guides";
Talk: 48th Conference on Manufacturing Systems,
Neapel (invited);
2015-06-23
- 2015-06-26; in: "48th Conference on Manufacturing Systems",
Procedia Cirp - Journal,
(2015),
ISSN: 2212-8271;
4 pages.
-
M. Rahmani, S. Krall:
"Numerical investigations on the static stiffness of industrial ball bearing linear guides";
Poster: 26th DAAAM International Symposium 2015,
Zadar;
2015-10-21
- 2015-10-24; in: "26th DAAAM International Symposium 2015",
(2015),
#.
-
M. Rahmani, R. Zisser-Pfeifer, S. Krall, F. Bleicher:
"Experimental Investigation of static stiffness and friction behavior of ball bearing linear motion guides";
Poster: 31st Danubia-Adria Symposium on Advances in Experimental Mechanics,
Kempten (invited);
2014-09-24
- 2014-09-27; in: "31st Danubia-Adria Symposium on Advances in Experimental Mechanics",
VDI Verein Deutscher Ingenieure e.V.,
(2014),
ISBN: 978-3-00-046740-0;
207
- 208.
-
C. Ramsauer, F. Bleicher:
"New method for determining single cutting edge breakage of a multi-tooth milling tool based on acceleration measurements of an instrumented tool holder";
Talk: 32nd CIRP Sponsored Conference on Supervising and Diagnostics of Machining Systems,
Web-Meeting (invited);
2021-06-28; in: "Journal of Machine Engineering",
Vol. 21 Nr1
(2021),
ISSN: 1895-7595;
67
- 77.
-
A. Raschendorfer, B. Mörzinger, E. Steinberger, P. Pelzmann, R. Oswald, M. Stadler, F. Bleicher:
"On IOTA as a potential enabler for an M2M economy in manufacturing";
Talk: 12th CIRP Conference on Intelligent Computation in Manufacturing Engineering,
Italien (invited);
2018-07-18
- 2018-07-20; in: "Procedia CIRP",
Elsevier,
(2018).
-
M. Reiter, F. Bleicher:
"Relevante SOPs in Apotheken";
Talk: Reinraumtechniktag 2008,
Austria Trend Hotel "Savoyen" (invited);
2008-10-09; in: "Reinraumtechniktag 2008",
F. Bleicher (ed.);
(2008).
More information
-
M. Reiter, S. Krall, F. Bleicher:
"Mechanical functionalisation of cutting inserts by machine hammer peening";
Talk: 28th DAAAM International Symposium on Intelligent Manufacturing & Automation,
Zadar, Kroatien (invited);
2017-11-09
- 2017-11-10; in: "Proceedings of the 28th DAAAM International Symposium (2017)",
Procedia Engineering,
(2017),
ISSN: 1726-9679;
767
- 772.
-
M. Rößler, M. Landsiedl, F. Bleicher, C. Salvatori, W. Kastner, F. Breitenecker:
"Studies on the Thermodynamical Coupling of a Machine Tool and its Environment using the Object-oriented Modelling Approach of Modelica";
Talk: European Modeling and Simulation Symposium,
Wien;
2012-09-19
- 2012-09-21; in: "Proceedings of the European Modeling and Simulation Symposium",
(2012),
ISBN: 978-88-97999-01-0;
434
- 439.
More information
-
B. Sagbas, M.N. Durakbasa:
"Determining frictional behavior of vitamin e blended Uhmwpe";
Talk: IMEKO XX World Congress International Measurement Confederation,
Busan, Korea;
2012-09-09
- 2012-09-14; in: "Proceedings of XX IMEKO World Congress International Measurement Confederation",
(2012),
ISBN: 978-89-950000-5-2;
6 pages.
More information
-
B. Sagbas, M.N. Durakbasa:
"Optimization of Frictional Heating Parameters of Artificial Joint Materials by Taguchi Approach";
Talk: 12th IMEKO TC10 Workshop on Technical Diagnostics,
Florence;
2013-06-06
- 2013-06-07; in: "New Perspectives in Measurements, Tools and Techniques for Industrial Applications",
IMEKO - International Measurement Confederation, University of Florence,
(2013),
ISBN: 978-88-903149-8-8;
96
- 101.
-
B. Sagbas, M.N. Durakbasa:
"Third - Body Wear Behavior of Orthop a edic Biopolymers";
Talk: World Congress on Mechanical, Chemical, and Material Engineering (MCM'15),
Barcelona, Spain (invited);
2015-07-21
- 2015-07-22; in: "Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering",
(2015),
Paper ID 363,
8 pages.
-
G. Scharinger-Urschitz, J. Brier, H. Walter, R. Mertz, F. Bleicher, M. Haider:
"New design of a bimetallic finned tube for the use in latent heat thermal energy storage units";
Talk: ASME 2015 Power and Energy,
San Diego, Kalifornien, USA;
2015-06-28
- 2015-07-02; in: "ASME 2015 9th International Conference on Energy Sustainability",
(2015),
Paper ID PowerEnergy2015-49143,
13 pages.
More information
-
G. Scharinger-Urschitz, H. Walter, J. Brier:
"Experimental Investigation on Compositions and Materials for Finned Bimetal Tubes for the use in Latent Heat Thermal Energy Storage Units";
Talk: 10th Conference on Sustainable Development of Energy, Water and Environment Systems,
Dubrovnik, Croatia;
2015-09-27
- 2015-10-02; in: "Proceedings of the 10th Conference on Sustainable Development of Energy, Water and Environment Systems",
(2015),
0565-1
- 0565-14.
-
P. Schörghofer, F. Bleicher, T. Weiler, Ch. Habersohn:
"Chatter Detection and Avoidance using a Sensory Tool Holder";
Poster: 34th Danubia-Adria Symposium on Advances in Experimental Mechanics,
University of Trieste, Italy (invited);
2017-09-19
- 2017-09-22; in: "DAS2017",
(2017),
ISBN: 978-88-8303-863-1.
-
K. Schröder, K. Schulmeister, G. Liedl:
"UV-radiation induced ozone and nitrogen oxide emission during CO2 laser welding";
Talk: Laser Safety Forum,
Copenhagen;
1995; in: "Proc. of the Int. Laser Safety Forum 95",
(1995),
305
- 311.
-
K. Schulmeister, C. Schmitzer, K. Duftschmid, G. Liedl et al.:
"Hazardous Ultraviolet an Blue-Light Emissions of CO2 Laser Beam Welding";
Talk: Proceedings Laser Safety,
Orlando/USA;
1997; in: "Proceedings International. Laser Safety",
(1997).
-
K. Schulmeister, C. Schmitzer, K. Duftschmid, G. Liedl, K. Schröder, D. Schuöcker:
"Secondary Hazards of High Power Laser Beam Welding";
Talk: Proceedings Portoroz,
Portoroz (invited);
1995; in: "Proceedings Portoroz",
(1995).
More information
-
T. Schumi, F. Bammer, D. Schuöcker, G. Humenberger:
"Laser-Assisted Bending: A Tool For Brittle Materials";
Talk: UMTIK 2010: 14th International Conference on Machine Design and Production,
Güzelyurt, Zypern;
2010-06-29
- 2010-07-02; in: "Proceeding UMTIK 2010",
METU-Ankara,
Vol. 2, Ankara
(2010),
ISBN: 978-975-429-282-4;
743
- 753.
More information
-
T. Schumi, F. Bammer, D. Schuöcker, G. Humenberger, B. Holzinger:
"Integration of high power lasers in bending tools";
Talk: Laser Assisted Net Shape Engineering,
Erlangen (invited);
2010-09-21
- 2010-09-24; in: "Proceedings of the LANE 2010",
Elsevier,
Physics Procedia Vol.5, Part 2
(2010),
ISSN: 1875-3892;
205
- 209.
More information
-
D. Schuöcker, F. Bammer, R. Bielak, G Schuöcker:
"Virtual Experiments, a Promising Application of Theoretical Modelling";
Talk: 1st Pacific International Conference on Applications of Lasers and Optics,
Melbourne/Australia;
2004-04-19
- 2004-04-21; in: "Proceedings PICALO",
LIA,
(2004),
ISBN: 0-912035-76-5.
More information
-
D. Schuöcker, F. Bammer, T. Schumi, B. Holzinger:
"Forming of Brittle Materials - A New and Valuable Application of Diode Lasers";
Talk: International Symposium on High Power Laser Ablation 2010,
Santa Fee, New Mexico, USA (invited);
2010-04-18
- 2010-04-22; in: "International Symposium on High Power Laser Ablation 2010",
C.R. Phipps (ed.);
INTERNATIONAL SYMPOSIUM ON HIGH POWER LASER ABLATION 2010. AIP Conference Proceedings,
Volume 1278
(2010),
ISBN: 978-0-8194-7207-6;
881
- 890.
More information
-
D. Schuöcker, A. Kaplan, G. Liedl et al.:
"Experimental and Theoretical Studies of Laser Welding";
Talk: Adva´nces in Automotive and Transportation Technology and Practice for the 21th Century,
Wien/Austria;
1999-06-14
- 1999-06-18; in: "Materials for Energy-Efficient Vehicles",
(1999),
399
- 407.
-
D. Schuöcker, A. Kratky, F. Bammer, G. Liedl, B. Holzinger:
"Laser Assisted Forming";
Talk: ICALEO 2003 - Int. Congress on Applications of Lasers & Electro-Optics,
Jacksonville;
2003-10-13
- 2003-10-16; in: "Proceedings",
(2003).
More information
-
D. Schuöcker, A. Kratky, F. Bammer, G. Liedl, B. Holzinger:
"New and Forthcoming Application of High Power Lasers: LASER ASSISTED FORMING";
Talk: LTLA - Int. Conf. Laser Technology and Laser Application,
St. Petersburg (invited);
2003; in: "Laser Technology and Laser Applications",
(2003).
-
D. Schuöcker, G. Liedl, A. Kratky:
"Laser assisted forming - a promising new application of high power lasers";
Talk: Proceedings M4PL16,
Igls/Austria;
2003-01-22
- 2003-01-24; in: "Proc. of the 16th neeting on modelling - simulation virtuality in high power laser technology",
(2003).
-
G Schuöcker, R. Bielak:
"Laser Ablation and Competitive Technologies in Paint Stripping of heavy anti-corrosion Coatings";
accepted as poster for: GCL/HPL,
Gmunden, Austria;
2006-09-23
- 2006-09-27; in: "Proceedings SPIE",
(2006).
-
C. Schwaiger, M. Hacksteiner:
"Assessment of grinding wheel wear via monitoring of process power";
Talk: 35th Danubia-Adria Symposium on Advances in Experimental Mechanics,
Romania (invited);
2018-09-25
- 2018-09-29; in: "35th DANUBIA ADRIA SYMPOSIUM ON ADVANCES IN EXPERIMENTA MECHANICS",
(2018),
ISBN: 978-606-23-0874-2.
-
J. Segl, C. Edtmaier, G. Liedl, R. Pospichal:
"Preparation of the diamond-metal interface in Al-diamond MMCs";
Talk: Topical Issues of Subsoil Usage,
St. Petersburg;
2017-04-19
- 2017-04-21; in: "International Forum of Young Researchers: Topical Issues of Subsoil Usage",
St. Petersburg Mining University,
St. Petersburg
(2017),
ISBN: 978-5-94211-780-1;
173
- 175.
-
F. Sienel, F. Bleicher:
"Neues im GAMP5";
Talk: Reinraumtechniktag 2008,
Austria Trend Hotel "Savoyen";
2008-10-09; in: "Reinraumtechniktag 2008",
F. Bleicher (ed.);
(2008).
More information
-
W. Sihn, F. Bleicher, D. Gerhard:
"Vision and implementation of the Learning and Innovation Factory of the Vienna University of Technology";
Talk: 2nd Conference on Learning Factories,
Wien;
2012-05-10; in: "Competitive production in Europe through education and training",
W. Sihn, A. Jäger (ed.);
(2012),
160
- 177.
-
A. Siller, C. Pollak, A. Steininger, F. Bleicher, N. Jochum:
"Interdependence of the coolant quality and the formation of a tribochemical reaction in the processing of parallel composite materials in continuous cutting";
Keynote Lecture: 31st Danubia-Adria Symposium on Advances in Experimental Mechanics,
Kempten (invited);
2014-09-24
- 2014-09-27; in: "31st Danubia-Adria Symposium on Advances in Experimental Mechanics",
VDI Verein Deutscher Ingenieure e.V.,
Düsseldorf
(2014),
ISBN: 978-3-00-046740-0;
39
- 40.
-
P. Smolek, G. Gourlis, B. Mörzinger, I. Leobner, K. Ponweiser:
"Thermal Building Simulation of an Industrial Production Facility using the Balanced Manufacturing Approach";
Talk: 12th Conference on Sustainable Development of Energy, Water and Environment Systems (SDEWES 2017),
Dubrovnik;
2017-10-04
- 2017-10-08; in: "Proceedings of the 12th Conference on Sustainable Development of Energy, Water and Environment Systems",
(2017),
ISSN: 1847-7178;
Paper ID 166,
11 pages.
More information
-
P. Smolek, I. Leobner, G. Gourlis, B. Mörzinger, B. Heinzl, K. Ponweiser:
"Hybrid Building Performance Simulation Models for Industrial Energy Efficiency Applications";
Talk: 11th Conference on Sustainable Development of Energy, Water and Environment Systems (SDEWES 2016),
Lissabon;
2016-09-04
- 2016-09-09; in: "Proceedings of the 11th Conference on Sustainable Development of Energy, Water and Environment Systems",
Faculty of Mechanical Engineering and Naval Architecture, Zagreb,
(2016),
ISSN: 1847-7178;
Paper ID SDEWES2016.0134,
12 pages.
More information
-
M. Stadler, P. Pelzmann, F. Bleicher:
"Design And Implementation Of An Inexpensive, High Resolution Displacement And Velocity Sensor";
Poster: 36th Danubia-Adria Symposium on Advances in Experimental Mechanics,
Plzeň, Czech Republic (invited);
2019-09-24
- 2019-09-27; in: "Danubia Adria Symposium",
(2019),
ISBN: 978-80-261-0876-4;
53
- 54.
-
M. Stark, C. Dorn, F. Bleicher:
"Energetic Comparison of Machine Tools";
Talk: Junior Scientist Conference 2010,
Vienna University of Technology;
2010-04-07
- 2010-04-09; in: "Proceedings of the Junior Scientist Conference 2010",
(2010),
ISBN: 978-3-200-01797-9.
-
F. Steiner, F. Bleicher:
"Head flow analysis for a bending process";
Poster: 32nd Danubia-Adria Symposium on Advances in Experimental Mechanics,
Stary Smokovec, Slowakei;
2015-09-22
- 2015-09-25; in: "32nd Danubia-Adria symposium on advances in experimental mechanics",
Faculty of Mechanical Engineering, University of Zilna, Slovakia,
(2015),
ISBN: 978-80-554-1094-4.
-
C. Stocker, R. Sonnleitner, G. Nauer, C. Poletti, A. Afjehi-Sadat:
"Ionenätzen zur metallographischen Präparation von Metallen";
Talk: 39. Metallographie-Tagung 2005,
Erlangen;
2005-09-14
- 2005-09-16; in: "Fortschritte in der Metallographie. Sonderbände d. prakt. Metallographie, Band 37",
M. Göken (ed.);
(2005),
ISBN: 3-88355-343-3;
161
- 166.
-
S. Stojadinovic, V. Majstorovic, M.N. Durakbasa:
"A Feature - Based Path Planning for Inspection Prismatic Parts on CMM";
Talk: XXI IMEKO World Congress,
Prague;
2015-08-30
- 2015-09-04; in: "XXI Imeko World Congress - Full Papers",
Issue 1
(2015),
ISBN: 978-80-01-05793-3;
Paper ID IMEKO-WC-2015-TC14-315,
6 pages.
More information
-
F. Stoop, J. Mayr, C. Sulz, F. Bleicher, K. Wegener:
"Fleet learning of thermal error compensation in machine tools";
Talk: 2021 26th IEE IES International Conference on Emerging Technologies and Factory Automation,
Vienna, Austria (invited);
2020-09-08
- 2020-09-11; in: "Procedia CIRP",
IEEE,
(2020),
ISBN: 978-1-7281-8956-7.
-
M. Stopper, B. Ljoljic, K. Stuja:
"Basic for an Interactive Desktop Training System (IDTS) in the Field of Mechatronic";
Talk: 13th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Learning from Nature',
Vienna;
2002-10-23
- 2002-10-26; in: "Annals of DAAAM for 2002 & Proceedings of the 13th International DAAAM Symposium",
B. Katalinic (ed.);
DAAAM International Vienna,
Vienna
(2002),
ISBN: 3-901509-29-1;
543
- 544.
-
K.J. Stout, M.N. Durakbasa, P.H. Osanna:
"Quality Assurance - Have We Specified it the Wrong Way Round?";
Talk: Proceedings of the 11th International Conference on Metrology & Properties of Engineering Surfaces,
Huddersfield, UK;
2007-07-17
- 2007-07-20; in: "Metrology & Properties of Engineering Surfaces",
L. Blunt, B. Rosen, T. Thomas, D. Whitehouse (ed.);
The University of Huddersfield,
Huddersfield
(2007),
ISBN: 978-1-86218-057-4;
##
- ##.
-
D. Strutzenberger, T. Frühwirth, T. Trautner, R. Hinterbichler, F. Pauker:
"Communication interface specification in OPC UA";
Talk: 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2019),
Zaragoza, Spain;
2019-09-10
- 2019-09-13; in: "Proceedings of the 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2019)",
IEEE,
(2019),
ISBN: 978-1-7281-0304-4;
1329
- 1332.
More information
-
K. Stuja:
"Die Optimierung von Fertigungsabläufen innerhalb eines flexiblen Fertigungssystems für Drehteile bei beschränkter Anzahl der Fertigungsmittel ";
Talk: Institut für Fertigungstechnik,
Wien;
2002-06-12; in: "Dissertation",
(2002),
1
- 138.
-
K. Stuja, B. Katalinic, S. Pllana, V. Kordic:
"FMSIM: An Integrated Environment for Scheduling of a Complex FMS";
Talk: 12 International DAAAM Symposium, Jena, Germany, 24-27 October 2001,
Jena, Germany;
2001-10-24
- 2001-10-27; in: "Annals of DAAAM for 2001 & Proceedings of 12th DAAAM International Symposium",
B. Katalinic (ed.);
DAAAM International Vienna,
(2001),
ISBN: 3-901509-19-4;
465
- 466.
-
C. Sulz, J. Brier, A. Agovic, F. Bleicher:
"Investigation of the Thermal Compensation Behaviour of Zero-Point Clamping Systems";
Keynote Lecture: CIRP ICME´20 Virtual Conference,
Online Meeting Italien;
2020-07-15
- 2020-07-17; in: "Procedia CIRP",
Elsevier,
(2020),
ISSN: 2212-8271;
69
- 74.
More information
-
S. Tatra, A. Otto, R. Gómez Vázquez:
"Computational Study on the Effect of the Pulse Length on Laser Ablation Processes";
Talk: Lasers in Manufacturing 2015,
München;
2015-06-22
- 2015-06-25; in: "Lasers in Manufacturing 2015",
(2015),
8 pages.
More information
-
S. Thalmann, J. Mangler, T. Schreck, C. Huemer, M Streit, F. Pauker, G. Weichhart, S. Schulte, C. Kittl, C. Pollak, M. Vukovic, G. Kappel, M. Gashi, S. Rinderle-Ma, J. Suschnigg, N. Jekic, S. Lindstaedt:
"Data Analytics for Industrial Process Improvement - A Vision Paper";
Talk: 2018 IEEE 20th Conference on Business Informatics (CBI),
Vienna;
2018-07-11
- 2018-07-14; in: "2018 IEEE 20th Conference on Business Informatics (CBI)",
IEEE Computer Society,
(2018),
ISBN: 978-1-5386-7016-3;
92
- 96.
More information
-
T. Trautner, I. Ayatollahi, D. Strutzenberger, T. Frühwirth, F. Pauker, B. Kittl:
"Behavioral modeling of manufacturing skills in OPC UA for automated execution by an independent cell controller";
Talk: 14th CIRP Conference on Intelligent Computation in Manufacturing Engineering,
Online Meeting Italien;
2020-07-15
- 2020-07-17; in: "Procedia CIRP 99",
(2020),
633
- 638.
-
T. Udiljak, B. Katalinic:
"monitoring and Diagnostics of Machinig Systems and Machining Processes ";
Talk: 14th European Maintenance Conference "Euromaintenance '98",
Dubrovnik;
1998-10-05
- 1998-10-07; in: "Proceedings of 14th European Maintenance Conference "Euromaintenance '98"",
(1998),
451
- 461.
-
T. Udiljak, B. Katalinic:
"Monitorizacion y diagnostico de sistemas de mecanizado y procesos de mecanizado";
Talk: Gestion de activos industriales, Vol 3,
Madrid;
1999; in: "Gestion de activos industriales, Vol 3",
(1999),
69
- 76.
-
K. Velisek, B. Katalinic:
"Design Methodology of Scheduling Strategies and Scenarios of Complex Flexible Systems";
Talk: MTF Trnava of Slovak Technical University Bratislava,
Trnava;
1997; in: "Scientific Works of MTF Trnava of Slovak Technical University Bratislava",
(1997),
71
- 80.
-
K. Velisek, B. Katalinic, E Hruskova:
"The Base Conditions of Mulitspindle Head Design";
Talk: 14th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Focus on Reconstruction and Development',
Sarajevo (invited);
2003-10-22
- 2003-10-25; in: "Annals of DAAAM for 2003 & Proceedings of the 14th International DAAAM Symposium",
B. Katalinic (ed.);
DAAAM International Vienna,
Vienna
(2003),
ISBN: 3-901-509-34-8;
481
- 482.
-
K. Velisek, B. Katalinic, P. Kostal:
"Structure of Information for technological Parameters";
Talk: DAAAM for 1998& Proceedings of 9th International DAAAM Symposium,
Cluj-Napoca;
1998-10-22
- 1998-10-24; in: "Annals of DAAAM for 1998& Proceedings of 9th International DAAAM Symposium",
(1998),
491
- 492.
-
B. Wallner, T. Trautner, F. Pauker, B. Kittl:
"Evaluation of Process Control Architectures for Agile Manufacturing Systems";
Talk: 14th CIRP Conference on Intelligent Computation in Manufacturing Engineering,
Online Meeting Italien (invited);
2020-07-15
- 2020-07-17; in: "Procedia CIRP",
Elsevier,
(2020).
-
A. Weckenmann, M.N. Durakbasa, P.H. Osanna:
"Ausbildung in der Koordinatenmesstechnik";
Talk: Kvalita a GPS 2005,
Brno, CZ;
2005-09-20
- 2005-09-21; in: "Kvalita a GPS 2005",
(2005),
ISBN: 80-214-3033-8;
35
- 40.
-
K. Wegener, F. Bleicher, U. Heisel, H. Hoffmeister, H.-C. Möhring:
"Noise and vibrations in machine tools";
Keynote Lecture: CIRP General Assembly,
virtual conference (invited);
2021-08-23
- 2021-08-28; in: "CIRP Annals - Manufacturing Technology",
Elsevier,
(2021),
ISSN: 0007-8506;
1
- 23.
-
K. Wegener, F. Bleicher, P. Krajnik, H. Hoffmeister, C. Brecher:
"Recent Developments in Grinding Machines";
Keynote Lecture: 67th General Assembly of CIRP,
Lugano, Italien (invited);
2017-08-20
- 2017-08-26; in: "Cirp Annals 2017",
Elsevier,
(2017),
ISSN: 0007-8506;
778
- 802.
More information
-
M. Wiesauer, F. Bleicher:
"Parameterization method for non-linear friction models of machine tool feed drives";
Talk: 18th CIRP Conference on Modeling of Machining Operations,
Ljubljana, Slovenia (invited);
2021-06-15
- 2021-06-17; in: "Procedia CIRP 102",
(2021),
ISSN: 2212-8271;
399
- 404.
-
G. Wiesinger, C. Baumann, M. Krystian:
"Impact Of The Ecap Process On The Machinability Of Aluminium (EN AW-6082)";
Poster: 34th Danubia-Adria Symposium on Advances in Experimental Mechanics,
University of Trieste, Italy (invited);
2017-09-19
- 2017-09-22; in: "DAS2017",
(2017),
ISBN: 978-88-8303-863-1.
-
K. Yaghmaei, G. Bas, M.N. Durakbasa:
"Computational Modeling Of Mechanical Properties Carbon Nanotubereinforced Hydroxyapatite Nanocomposite By Means Of Mechanical Nanometrology";
Talk: IMEKO XXI World Congress,
Prague;
2015-08-30
- 2015-09-04; in: "XXI IMEKO World Congress - Full Papers",
Issue 1
(2015),
ISBN: 978-80-01-05793-3;
5 pages.
More information
-
V. Yakovlev, F. Bammer, O. Smirnova, A. Scrinzi:
"Direct reconstruction of electron release dynamics from attosecond streaking measurement";
Talk: 13th International Laser Physics Workshop,
Trieste, Italy;
2004-07-12
- 2004-07-16; in: "Book of Abstracts",
(2004),
78.
-
R. Yigit, I. Birlik, N. Ak Azem, O. Bardakcioglu, M.N. Durakbasa, E. Celik:
"Investigation Of The Minimum Quantity Lubrication Grinding Using Nanofluids";
Talk: Proceedings of ICPR-AEM and QIEM 2014 Conference,
Cluj-Napoca, Rumänien;
2014-07-01
- 2014-07-05; in: "2014 INTERNATIONAL CONFERENCE ON PRODUCTION RESEARCH - REGIONAL CONFERENCE AFRICA, EUROPE AND THE MIDDLE EAST and 3rd INTERNATIONAL CONFERENCE ON QUALITY AND INNOVATION IN ENGINEERING AND MANAGEMENT",
Technical University of Cluj- Napoca
(2014),
ISBN: 978-973-662-978-5;
4 pages.
More information
-
R. Zemann:
"Practical Results to the Long Term Behavior of Fibre Reinforced Polymers under Constant Load";
Talk: 20th Symposium on Composites,
Wien (invited);
2015-07-01
- 2015-07-03; in: "20th Symposium on Composites",
C. Edtmaier, G. Requena (ed.);
Trans Tech Publicationa,
Part 2
(2015),
ISBN: 978-3-03835-515-1;
952
- 959.
-
R. Zemann:
"Weight-loss potential of composite spring elements";
Talk: Transportation weight loss diet conference 2013,
Stuttgart (invited);
2013-06-05
- 2013-06-06; in: "Transportation weight loss diet conference 2013",
UKIP Media Events Ltd,
Dorking, Surrey
(2013),
100.
-
R. Zemann, F. Bleicher:
"Challenges in the field of machining fibre reinforced polymers";
Talk: VSS Vienna Young Scientists Symposium 2015,
Wien (invited);
2015-06-25
- 2015-06-26; in: "VSS Vienna young Scientists Symposium 2015",
Book-of-abstracts.com,
(2015),
ISBN: 978-3-9504017-0-7;
164
- 165.
-
R. Zemann, F. Bleicher:
"Helical Composite Springs";
Talk: 29th Danubia-Adria-Symposium on Advances in Experimental Mechanics,
Belgrad;
2012-09-26
- 2012-09-29; in: "Proceedings of the 29th Danubia-Adria-Symposium",
Planeta-Print,
29
(2012),
ISBN: 978-86-7083-762-1;
10
- 11.
-
R. Zemann, F. Bleicher:
"Manufacturing of threads in a carbon fibre reinforced polymer";
Poster: 32nd Danubia-Adria Symposium on Advances in Experimental Mechanics,
Stary Smokovec, Slowakei (invited);
2015-09-22
- 2015-09-25; in: "32nd Danubia-Adria symposium on advances in experimental mechanics",
Faculty of Mechanical Engineering, University of Zilna, Slovakia,
(2015),
ISBN: 978-80-554-1094-4;
42
- 43.
-
R. Zemann, F. Bleicher, F. Puschitz, R. Zisser-Pfeifer:
"Electrochemical Micromilling";
Poster: 28th Danunbia-Adria-Symposium,
Siofok;
2011-09-28
- 2011-10-01; in: "Danubia-Adria-Symposium",
(2011),
ISBN: 978-963-9058-32-3;
287
- 288.
More information
-
R. Zemann, R. Fürbacher, F. Bleicher:
"A Measurement Technology to define the quality of machined FRP";
Poster: 30th DAS Symposium on Advances in Experimental Mechanics,
Primosten (invited);
2013-09-25
- 2013-09-28; in: "30th DAS Symposium on Advances in Experimental Mechanics",
Croation Society of Mechanics,
Zagreb
(2013),
ISBN: 978953753917-7;
298
- 299.
-
R. Zemann, L. Kain, F. Bleicher:
"Vibration Assisted Machining of Carbon Fibre Reinforced Polymers";
Talk: 24th DAAAM International Symposium,
Zadar (invited);
2013-10-23
- 2013-10-26; in: "Annals of DAAAM for 2013 & Proceedings of 24th International DAAAM Symposium",
Procedia Engineering, Elsevier Ltd.,
Volume 69, 2014
(2013),
ISBN: 978-3-901509-971;
536
- 543.
-
R. Zemann, J. Sacherl, W. Hake, F. Bleicher:
"Tool Life Experimente and Vibration Assistance in Regard to the Machining of CFRP";
Talk: 20th Symposium on Composites,
Wien (invited);
2015-07-01
- 2015-07-03; in: "20th Symposium on Composites",
C. Edtmaier, G. Requena (ed.);
Trans Tech Publicationa,
Part 1
(2015),
ISBN: 978-3-03835-515-1;
707
- 708.
-
R. Zemann, M. Zillner, G. Koch:
"Impact of the EcapProcess on the Machinability of Copper";
Talk: 33rd Danubia Adria Symposium on Advances in Experimental Mechanics,
Portoroz, Slovenia (invited);
2016-09-20
- 2016-09-23; in: "DAS 2016",
(2016),
46
- 47.
-
M. Zillner, R. Zemann:
"Impact of the ECAP process on the machinability of pure titanium";
Talk: VSS Vienna Young Scientists Symposium 2015,
Wien (invited);
2015-06-25
- 2015-06-26; in: "VSS Vienna Young Scientists Symposium 2015",
Book-of-abstracts.com,
(2015),
ISBN: 978-3-9504017-0-7;
158
- 159.
-
R. Zisser-Pfeifer, R. Prahl:
"Model for the Reduction of components of deviations for coordinate measuring machines";
Talk: 29th Danubia-Adria-Symposium on Advances in Experimental Mechanics,
Belgrad;
2012-09-26
- 2012-09-29; in: "29th Danubia-Adria-Symposium on Advances in Experimental Mechanics",
Planeta-Print,
29
(2012),
ISBN: 978-86-7083-762-1;
14
- 15.
Talks and Poster Presentations (without Proceedings-Entry)
-
B. Adjassoho, E. Kozeschnik, C. Lechner, Ch. Habersohn, F. Bleicher, S. Gössinger, C. Bauer, F. Heindl, M. Rodríguez Ripoll, C Tomastik:
"Controlled surfaces treatment with MAchine Hammer Peening";
Talk: METAL 2013,
Brno;
2013-05-15
- 2013-05-17.
-
A. Afjehi-Sadat:
"Nanometrology and Nanotechnology for Mechanical Engineering and Biomedical Application";
Talk: First Nano Partnering Day,
WIFI, Wien;
2002-05-29.
-
F. Akhavei:
"Digitaler Transfer in der Prozesskette";
Talk: Chefsache Industrie 4.0,
AspernIQ Pilotfabrik (invited);
2017-05-11.
-
F. Akhavei, F. Bleicher:
"Advanced Manufactury in Einzel- und Kleinserienfertigung";
Talk: Intertool-Messe 2016,
Messe Wien (invited);
2016-05-12.
-
F. Akhavei, F. Bleicher:
"Industrie 4.0 - für Einzel- und Kleinserienfertigung";
Talk: Innovative Fertigungsautomation,
ARS-Akademie (invited);
2016-04-28.
-
F. Akhavei, F. Bleicher:
"Industrie 4.0 in der Praxis";
Talk: Industrie 4.0 in der Praxis-Seminar,
Knowledge Academy International (invited);
2016-01-28
- 2016-01-29.
-
F. Akhavei, F. Bleicher:
"Moderne Fertigungsmethoden - Industrie 4.0";
Talk: Workshop - Moderne Fertigungsmethoden,
Management Center Innsbruck (invited);
2015-06-05
- 2015-06-06.
-
F. Akhavei, F. Bleicher, P. Kreuzer:
"Effiziente Produktion in Einzel- und Kleinserienfertigung";
Talk: Workshop - Effiziente Produktion,
Kresta-Anlagenbauer G.m.b.H. (invited);
2016-01-07.
-
F. Akhavei, P. Kreuzer, F. Bleicher:
"Anlagenbau der Zukunft";
Talk: Workshop - Anlagenbau der Zukunft,
Kresta-Anlagenbauer G.m.b.H. (invited);
2015-04-07.
-
F. Akhavei, F. Pauker:
"Vertical integration of decenttralized system in production networks";
Talk: WPK 2016,
Wien (invited);
2016-09-28
- 2016-09-29.
-
I. Ayatollahi:
"Cyber-physische Spannvorrichtung";
Talk: e-Day:18,
WKO (invited);
2018-04-12.
-
I. Ayatollahi:
"OPC-UA";
Talk: INNOVATIONSTAG - intelligente vernetzte Spanntechnik,
TEC-Lab Objekt221; Wien (invited);
2019-06-14.
-
I. Ayatollahi, F. Bleicher:
"Einsatz von SemanticWeb Technologien in der Industrie 4.0";
Talk: 2. Seminar Energieeffizienz - Intelligente und energieeffiziente Produktion,
Messe Wien (invited);
2016-05-11.
-
F. Bammer:
"A new Concept for a High Power Diode Laser";
Talk: Argelas Generalversammlung,
Wien (invited);
2003-03-04.
-
F. Bammer:
"A new concept for a High Power Diode Laser";
Talk: Laser Seminar/Mauterndorf,
Mauterndorf/Austria (invited);
2003-01-17
- 2003-01-21.
-
F. Bammer:
"A Virtual Diode Laser";
Talk: Proceedings M4PL16,
Igls/Austria (invited);
2003-01-20
- 2003-01-24.
-
F. Bammer:
"Dioden- u. Festkörperlaser";
Talk: Seminar für AUVA "Laser und Sicherheit",
Wien (invited);
2004-06-24
- 2004-06-25.
-
F. Bammer, B. Holzinger:
"A new compact high brilliance diode laser type";
Talk: 9th International EULASNET Meeting,
TU Wien, Inst. 345;
2005-12-14.
-
F. Bammer, B. Holzinger:
"Ein neues Konzept für einen Hochleistungsdiodenlaser";
Talk: Argelas Generalversammlung,
Wien (invited);
2004-03-11.
-
F. Bammer, B. Holzinger:
"Realization of Time-Multiplexing for High Power Diode Lasers";
Talk: M4PL18,
Igls/Tirol;
2005-01-19
- 2005-01-21.
-
F. Bammer, B. Holzinger:
"Time-Multiplexing with Diode Lasers";
Talk: Anwendertreffen Laserverbund Berlin-Brandenburg,
Wien (invited);
2004-10-22.
More information
-
F. Bammer, B. Holzinger, T. Schumi:
"Zeitmultiplexing von Hochleistungslaserdioden";
Talk: Freitagskolloquium,
Ferdinand Braun Institut für Höchstfrequenztechnik, Berlin (invited);
2006-11-24.
More information
-
F. Bammer, A. Kratky, D. Schuöcker et al.:
"Umformen mit dem Laserstrahl";
Talk: Laser Optics Berlin,
Berlin;
2008-03-17
- 2008-03-19.
More information
-
F. Bammer, D. Schuöcker, R. Petkovsek, J. Mozina:
"Dual mode single crystal photo-elastic modulator and possible applications";
Poster: 10th School on Acousto-Optics and Applications,
Danzig;
2008-05-12
- 2008-05-15.
More information
-
C. F. Barbatti, J. Garcia, G. Liedl, H. Pinto, A. Pyzalla:
"Joining of Hardmetal to Steel by Laser Beam Welding";
Talk: 16. DGM-Symposium Verbundwerkstoffe und Werkstoffverbunde,
Bremen;
2007-03-14
- 2007-03-16.
More information
-
J.M. Bauer, M.N. Durakbasa, G. Bas:
"Multi Functional Intelligent Measurement Robot, As a Part of a Global Quality Management System for Collaboration Between Small, Medium and Large Scale Enterprises";
Talk: QIEM 2nd International Conference on Quality and Innovation in Engineering and Management,
Cluj-Napoca;
2012-11-22
- 2012-11-24.
More information
-
C. Baumann:
"2. Quarterly Meeting - MCC";
Talk: Quarterly Meeting - MCC Face milling - Buderus,
Österreich (invited);
2020-04-22.
-
C. Baumann:
"2D - Modellierung des Orthogonalschnittes u. Vorstellung des Orthogonalschnittversuchs";
Talk: AfA Jahresabschluss 2020,
Webmeeting; Institut für Fertigungstechnik und Photonische Technologien der TU Wien TEC-Lab Labor für Fertigungstechnik, Franz Grill Straße 4, Objekt 221, 1030 Wien (invited);
2020-11-25.
-
C. Baumann:
"3. Quarterly Meeting - MCC";
Talk: Quarterly Meeting - MCC Face milling - Buderus,
Österreich (invited);
2020-08-19.
-
C. Baumann:
"4. Quarterly Meeting - MCC";
Talk: Quarterly Meeting - Abschlussbericht MCC Face milling - Buderus,
Österreich (invited);
2020-12-07.
-
C. Baumann:
"5. Quarterly Meeting - MCC";
Talk: Quarterly Meeting - MCC voestalpine BÖHLER Bleche Tool comparison Walter tools/Six Sigma tools,
Mürzzuschlag (invited);
2021-04-15.
-
C. Baumann:
"Quarterly Meeting - MCC Face milling - Buderus";
Talk: 1. Quarterly Meeting - MCC,
TEC-Labor, Franz Grill Straße 4, Obj. OA, 1030 Wien;
2019-12-03.
-
C. Baumann:
"Vibration-assisted drilling of multilayer CFRP / Ti/ Al stacks";
Talk: AfA Jahresabschluss 2018,
Institut für Fertigungstechnik und Hochleistungslasertechnik der TU Wien TEC-Lab Labor für Fertigungstechnik, Franz Grill Straße 4, Objekt 221, 1030 Wien (invited);
2018-11-21.
-
C. Baumann, S. Biegl, S. Krall:
"Abschlussprojektmeeting, voestalpine BÖHLER Bleche GmbH & Co KG";
Talk: Abschlussbericht voestalpine BÖHLER Bleche Tool comparison Boehlerit/TCM,
Mürzzuschlag (invited);
2021-10-22.
-
C. Baumann, M. Lamprecht, S. Biegl, S. Krall:
"Abschlussbesprechung Fertigungsparameter Leichtbaustahl";
Talk: Abschlussbericht Rheinmetall Waffe Munition GmbH - Werkstoffqualifizierung eines Leichtbaustahls,
Deutschland (invited);
2021-04-23.
-
C. Baumann, S. Maier, S. Krall:
"6. Quarterly Meeting - MCC";
Talk: Quarterly Meeting - Abschlussbericht voestalpine BÖHLER Bleche Tool comparison Walter tools/Six Sigma tools,
Mürzzuschlag (invited);
2021-09-10.
-
C. Baumann, S. Maier, S. Krall:
"F&E-Besprechung";
Talk: Abschlussbericht voestalpine BÖHLER Bleche Tool comparison Walter tools/Six Sigma tools,
Mürzzuschlag (invited);
2021-09-27.
-
C. Baumann, G. Wiesinger:
"Ergebnisse der Drehversuche (Titanlegierung + Aluminium)";
Talk: 8. Projektmeeting "inForm" (AIT),
Wr. Neustadt (invited);
2017-02-21.
-
D. Berger, F. Bleicher:
"Eco2 - Cut";
Talk: Ökoprofit Klub - Workshop,
Graz;
2008-12-11.
-
D. Berger, G. Geiger, F. Bleicher:
"Jahresabschlussbericht 2009 Forschungsgemeinschaft Straßenbahn SP2";
Talk: Jahresabschlussmeeting Forschungsgemeinschaft Straßenbahn alle SP,
Wien (invited);
2009-12-11.
-
J. Bernreiter, F. Bleicher:
"Aktuelle Entwicklungen im Projekt "UAG"";
Talk: CORNET - User Comittee Meeting,
Eibiswald;
2008-09-30.
-
J. Bernreiter, F. Bleicher:
"Hybridbearbeitung";
Talk: AFA - Ausschuss für Arbeitstechnik - Zerspanung,
TU Wien (invited);
2009-12-04.
More information
-
J. Bernreiter, F. Bleicher:
"Neue Technologie für den Formenbau um Oberflächengüten zu verbessern und die Härte zu erhöhen.";
Talk: Zerspanungstage Judenburg,
Judenburg (invited);
2010-11-10
- 2010-11-11.
More information
-
J. Bernreiter, F. Bleicher:
"Ultrasonic Assisted Grinding - UAG";
Talk: Informationsveranstaltung des Kunststoffcluster NÖ,
Wirtschaftskammer Eisenstadt;
2007-09-12.
More information
-
J. Bernreiter, F. Bleicher:
"Zerspanungssimulation mit Abaqus";
Keynote Lecture: AFA - Ausschuss für Arbeitstechnik - Zerspanung,
TU-Wien;
2007-11-14.
-
J. Bernreiter, F. Bleicher, T. Gröger:
"Ultrasonic Assisted Grinding - Projektzwischenbericht";
Talk: CORNET - User Comittee Meeting,
Wien;
2009-02-25.
-
R. Bielak:
"E-learning in laser technology with user interaction";
Talk: Anwendertreffen Laserverbund Berlin-Brandenburg,
Wien/Austria (invited);
2004-10-22.
-
R. Bielak, C. Stiglbrunner:
"Virtuela - Virtual Eurolaser Laboratory";
Talk: 8th International Conference Technology 2003,
Bratisalava/Slowakei;
2003-09-09
- 2003-09-10.
-
F. Bleicher:
"A machine tool application based on parallel kinematics in comparison with serial concepts";
Talk: RAAD - 10th International Workshop on Robotics in Alpe-Adria-Danube Region,
Wien;
2001-05-16
- 2001-05-18.
-
F. Bleicher:
"Advanced Machining Systems";
Talk: Manufuture Austria,
Wien (invited);
2007-11-21.
More information
-
F. Bleicher:
"Advanced Manufacturing Systems";
Talk: Impulsvortrag PdZ,
Wien;
2014-05-12.
-
F. Bleicher:
"Aktuelle Trends aus Forschung, Entwicklung, Business";
Talk: Forum: Virtuelle Inbetriebnahme,
Wien (invited);
2014-11-19.
-
F. Bleicher:
"Allgemeine Trends in der Zerspanung";
Talk: Roadshow 2011,
Klaus, Gnadenwald, Fuschlsee, St. Ulrich bei Steyr, Graz, Vösendorf, St. Pölten (invited);
2011-10-10
- 2011-10-19.
-
F. Bleicher:
"Auf dem Weg zu Industrie 4.0";
Keynote Lecture: Walter Technologietagung 2015,
Linz (invited);
2015-10-28.
-
F. Bleicher:
"Auf dem Weg zur Produktion von morgen";
Talk: WKO Roadshow 2014, Neue Trends, Neue Märkte, Neue Wege,
Wien (invited);
2014-11-11.
-
F. Bleicher:
"Auswirkungen und Trends der Digitalisierung auf die Produktion";
Talk: 2. Enterprise 4.0 Forum,
Wien (invited);
2017-12-04.
-
F. Bleicher:
"By detail integration towards the "system of systems"";
Talk: EPLAN Veranstaltung in der Industrie 4.0 Fabrik,
Wien; Aspern IQ (invited);
2018-01-25.
-
F. Bleicher:
"CFK im modernen Werkzeugmaschinenbau";
Talk: AFA - Ausschuss für Arbeitstechnik - Zerspanung,
Kapfenberg (invited);
2001-03-28.
More information
-
F. Bleicher:
"Co-Simulationsumgebung für die Optimierung der Energieeffizienz von Produktionssystemen";
Keynote Lecture: 17. Dresdner Werkzeugmaschinen-Fachseminar "Intelligenz und Vernetzung in der Entwicklung und beim Betrieb von Werkzeugmaschinen",
Dresden (invited);
2015-12-07
- 2015-12-08.
-
F. Bleicher:
"Current research topics at the IFT";
Talk: AfA Jahresabschluss 2018,
Institut für Fertigungstechnik und Hochleistungslasertechnik der TU Wien TEC-Lab Labor für Fertigungstechnik, Franz Grill Straße 4, Objekt 221, 1030 Wien;
2018-11-21.
-
F. Bleicher:
"Das Produktionssystem der Zukunft";
Talk: Workshop Digitrans,
Flughafen Wien Schwechat (invited);
2017-06-06.
-
F. Bleicher:
"Dezentrale Steuerungslösungen im Sondermaschinenbau";
Talk: Branchentag Automation,
Vösendorf (invited);
2000-06-15.
More information
-
F. Bleicher:
"Die 4. industrielle Revolution - Auswirkungen auf Wertschöpfungsnetzwerke und Supply Chains";
Talk: 5. BMÖ-Expertendialog Einkauf 4.0,
Haus der Industrie (Wien) (invited);
2019-05-09.
-
F. Bleicher:
"Die Kunst der Herstellung nicht gerader Bohrungen";
Talk: PRÄZISIONSWERKZEUGE für die spanende Fertigung,
Stuttgart-Nürtingen (invited);
2019-02-26
- 2019-02-27.
-
F. Bleicher:
"Die Werkzeugmaschine der Zukunft - wandlungsfähig und agil";
Talk: Forum Maschinenbau 2012,
Hagenberg im Mühlkreis (invited);
2012-01-31.
-
F. Bleicher:
"Durch Digitalisierung zur energieeffizienten Produktion von morgen";
Talk: Energiegespräche,
Technisches Museum Wien (invited);
2018-11-27.
-
F. Bleicher:
"Durch innovative Detaillösungen zum Produktionssystem der Zukunft";
Talk: e-Day:18,
WKO (invited);
2018-04-12.
-
F. Bleicher:
"Einfluss der Topologie der Wendeschneidplatte";
Talk: Fohnsdorfer Zerspanungstage,
Fohnsdorf (invited);
2006-11-22.
More information
-
F. Bleicher:
"Einfluss des Spanwinkels auf den Zerspanungsprozess";
Talk: Fohnsdorfer Zerspanungstage,
Fohnsdorf (invited);
2006-11-23.
More information
-
F. Bleicher:
"Einfluss des Spanwinkels auf die Hochgeschwindigkeitsbearbeitung";
Keynote Lecture: AFA - Ausschuss für Arbeitstechnik - Zerspanung,
TU Wien;
2006-11-29.
More information
-
F. Bleicher:
"Einleitung & Projekt BAMA";
Talk: AfA-Webinar zum Thema "Energieeffiziente Zerspanung",
Online als Webinar (invited);
2021-03-24.
-
F. Bleicher:
"Energie und Qualität - Zusammenhänge die man nicht vermutet";
Talk: Jubiläumsforum Weidmüller 10 Jahre Mitglied im MC,
Wiener Neudorf (invited);
2014-02-21.
-
F. Bleicher:
"Energieeffiziente Fertigung";
Talk: Technologie Workshop des Umweltclusters der Wirtschaftsagentur Wien,
Wien (invited);
2013-06-06.
-
F. Bleicher:
"Energieeffiziente Produktion - Potentiale für die Zukunft";
Talk: Seminar Energieeffizienz,
TU Wien;
2015-05-28.
-
F. Bleicher:
"Energieeffiziente Produktion -Potentiale für die Zukunft";
Talk: Energieeffiziente Produktion -Potentiale für die Zukunft,
Wien;
2015-05-28.
-
F. Bleicher:
"Enhancedmachining by sensor and actuator integration";
Talk: EMO - Hannover,
Hannover (invited);
2008-04-21
- 2008-04-23.
-
F. Bleicher:
"Entwicklung einer parallelkinematischen Bohr- und Fräseinheit für den flexiblen Einsatz in automatisierten Anlagen";
Talk: AFA - Ausschuss für Arbeitstechnik - Zerspanung,
Wien (invited);
2001-12-12.
More information
-
F. Bleicher:
"Fabrik 4.0 - Herausforderungen und Chancenpotentiale für Unternehmen durch optimierte Prozessketten";
Talk: Österreichisches Einkaufsforum 2014,
Wien (invited);
2014-10-09
- 2014-10-10.
-
F. Bleicher:
"Factory of the Future -Towards system of systems";
Keynote Lecture: Future Factory Conference,
Helsinki, Finland (invited);
2017-11-14.
-
F. Bleicher:
"Finishing of Weight-optimized Connecting Rods";
Talk: 13th Powertrain Manufacturing Conference 2013,
Darmstadt (invited);
2013-09-26
- 2013-09-27.
-
F. Bleicher:
"From innovation to real product: mi-factory Demonstration and innovation factory at TU Wien";
Talk: CIRP Winter Meeting 2015,
Paris (invited);
2015-02-18
- 2015-02-20.
-
F. Bleicher:
"FTI - Strategie Advanced Manufacturing 4.0";
Talk: 9. Sitzung des Arbeitskreises "Wettbewerbsfähigkeit der NÖ Industrie",
Wien (invited);
2014-03-13.
-
F. Bleicher:
"Funktionalisieren von Werkzeug-Oberflächen durch die Technologie des Schlagverdichtens";
Talk: Forum Stanztechnik,
Fellbach bei Stuttgart (invited);
2011-11-08
- 2011-11-09.
-
F. Bleicher:
"Future of Production";
Keynote Lecture: Hörbiger Production Conference 2014,
Stuttgart (invited);
2014-06-01
- 2014-06-04.
-
F. Bleicher:
"Future technologies and new machine tool research activities";
Keynote Lecture: IMT 2010 - Tschechisch - Österreichisches Werkzeugmaschinenkolloquium,
Brünn;
2010-09-16.
More information
-
F. Bleicher:
"Geometrische Produktspezifikation in den Produktionsprozessen der Zukunft";
Talk: Workshop Industrievermessung,
Research Group Engineering Geodesy (invited);
2018-11-08.
-
F. Bleicher:
"Hochdynamische Vorgänge im Zerspanungsprozess";
Poster: AFA - Ausschuss für Arbeitstechnik - Zerspanung,
TU Wien;
2005-12-07.
More information
-
F. Bleicher:
"Hybridbearbeitung von sprödharten Werkstoffen";
Talk: Tooling Days 2012,
Kapfenberg (invited);
2012-06-13
- 2012-06-14.
-
F. Bleicher:
"Impulse aus Wirtschaft und Forschung";
Talk: Intelligente Produktion,
Wien (invited);
2011-06-01.
-
F. Bleicher:
"Industrial Internet ofThings: Potential, Märkte, Zukunft der Produktion";
Talk: Webinar,
WKO;
2018-11-28.
-
F. Bleicher:
"Industrie 4.0";
Keynote Lecture: TechwomenTalk 2015,
Wien;
2015-10-13.
-
F. Bleicher:
"Industrie 4.0 - Die intelligente Fabrik der Zukunft";
Talk: 26. Leobener Kunststoff-Kolloquium,
Leoben (invited);
2017-04-20.
-
F. Bleicher:
"Industrie 4.0 Auf dem Weg zur Produktion von morgen";
Keynote Lecture: e-Day 2015,
Wien (invited);
2015-03-05.
-
F. Bleicher:
"Industrie 4.0 in der Kunststoffbranche";
Keynote Lecture: KC-Jahrestagung 2015 - Kunststoff - gestern, heute, morgen,
Neuhofen/Ybbs;
2015-06-23.
-
F. Bleicher:
"Industrie 4.0 in Theorie und Praxis";
Keynote Lecture: Chefsache Industrie 4.0,
Wien (invited);
2015-12-01.
-
F. Bleicher:
"Industrie 4.0, neue Fertigungsverfahren und -maschinen";
Talk: Technologieforum Mostviertel,
Amstetten (invited);
2014-09-23.
-
F. Bleicher:
"Innovation in der Produktionstechnik";
Talk: Tagung des Vorstands der Industriellenvereinigung,
Wien (invited);
2007-11-29.
More information
-
F. Bleicher:
"Innovationen in der Fertigungstechnik";
accepted as talk for: Round Table des Mechatronic Clusters,
Linz;
2010-11-09.
-
F. Bleicher:
"Innovationen und Trends in der spanenden Fertigung";
Talk: Berufungsvortrag,
Technische Univserität Graz (invited);
2008-10-15.
More information
-
F. Bleicher:
"Innovative Detaillösungen für das Produktionssystem der Zukunft";
Talk: Wirtschaft 4.0-Regionalveranstaltung,
Eggersdorfer Str. 29, 3300 Amstetten (invited);
2018-05-17.
-
F. Bleicher:
"Innovative Fertigungstechnologien - Bausteine für den wirtschaftlichen Erfolg eines Unternehmens";
Talk: eDay:16,
Wien (invited);
2016-03-03.
-
F. Bleicher:
"Innovative Fertigungsverfahren - Bausteine für den wirtschaftlichen Erfolg eines Unternehmens";
Talk: Impulsforum AfA-Mitgliederversammlung,
METZLER GmbH & Co KG (invited);
2016-04-06.
-
F. Bleicher:
"Interaktion Maschine - Prozess - Einführung";
Talk: MC-Workshop 2012,
Linz (invited);
2012-05-08.
-
F. Bleicher:
"Ist eine radikale Prozess-innovation mit Industrie 4.0 möglich?";
Talk: 12. Forum Innovation,
Perchtoldsdorf (invited);
2015-04-23.
-
F. Bleicher:
"Klassifizierung rostfreier Werkstoffe in der Industrie für die spanende Bearbeitung";
accepted as talk for: Zerspanungstage Judenburg,
Judenburg;
2010-11-10
- 2010-11-11.
-
F. Bleicher:
"Kottingbrunn";
Keynote Lecture: MacroPower Days 2015,
Kottingbrunn (invited);
2015-04-22
- 2015-04-23.
-
F. Bleicher:
"Kühlschmierstoffe: Produktivitäts- oder Kostenfaktor";
Talk: TIM Praxisforum Zerspanung,
Wels (invited);
2013-10-01.
-
F. Bleicher:
"Maschinenkonzepte";
Talk: MC-Workshop 2012,
Linz (invited);
2012-05-08.
-
F. Bleicher:
"Maschinenkonzepte der Zukunft";
Talk: Laser Tech Day 2013,
Pasching (invited);
2013-01-31.
-
F. Bleicher:
"Mikro-Umformen, Oberflächen-Funktionalisieren";
Talk: Technologieforum Mostviertel,
Amstetten (invited);
2014-09-23.
-
F. Bleicher:
"Moderne Verfahren in der Produktionstechnik";
Talk: Landesinnung Wien der Mechatroniker,
Wien;
2008-10-07.
More information
-
F. Bleicher:
"Neue Technologien in spanenden Werkzeugmaschinen";
Keynote Lecture: ISCAR Technologietagung 2015,
Steyr;
2015-06-09.
-
F. Bleicher:
"Next Technologies: Interaction of Mechatronics in Manufacturing Systems";
Talk: 23rd International DAAAM Symposium,
Zadar (invited);
2012-10-24
- 2012-10-27.
-
F. Bleicher:
"Parallelkinematische Werkzeugmaschinen";
Talk: Buchpräsentation,
Wien, Technische Universität;
2003-05-27.
More information
-
F. Bleicher:
"Pilot factory -the challenge of technology transfer to real economy";
Talk: Austrian-Korean-Forum,
Tech Gate Vienna (invited);
2016-03-16.
-
F. Bleicher:
"Pilot Factory 4.0";
Talk: Vortrag ATOS-VOEST,
voestalpine Stahlwelt Linz, Austria (invited);
2016-10-24.
-
F. Bleicher:
"PilotfabrikIndustrie4.0";
Talk: Industrie 4.0,
Vamp (invited);
2018-04-06.
-
F. Bleicher:
"Präzisionsbearbeitung im Maschinenbau";
Talk: ASMET FU-Sitzung Thermisch Spritzen,
Schwaz (invited);
2011-05-25.
-
F. Bleicher:
"Produktion heute: Auf dem Weg zur vierten industriellen Revolution";
Talk: Fachtagung Schaeffler Austria "Wegweisende Innovationen und Produktionslösungen",
Berndorf (invited);
2014-06-17.
-
F. Bleicher:
"Produktion und Handwerk der Zukunft";
Talk: ZUKUNFTSKONGRESS 2016,
St. Pölten (invited);
2016-06-25.
-
F. Bleicher:
"Produktion von morgen - Herausforderung variantenreiche Fertigung";
Keynote Lecture: IndustryTech 2015,
Zell am See (invited);
2015-09-22
- 2015-09-23.
-
F. Bleicher:
"Produktionstechnisches Innovations- und Applikationszentrum (PIA) in der Seestadt Aspern";
Talk: Aspern Seestadt - Meet the Pioneers,
Wien (invited);
2012-04-26.
-
F. Bleicher:
"Prozess - Werkzeug - Maschine im Kommunikationssystem "Fertigungstechnik der Zukunft"";
Talk: 13. Schmalkalder Werzeugtagung,
Schmalkalden (invited);
2018-11-14
- 2018-11-15.
-
F. Bleicher:
"Reinraumtechnik - Ein Überblick";
Keynote Lecture: Reinraumtechniktag 2007,
Wien;
2007-10-04.
More information
-
F. Bleicher:
"Research on Cutting Technologies at the Institute of Production Engineering, Vienna University of Technology";
Talk: ISCAR´s International Technical Training Seminar,
ISCAR Tefen Industrial Zone (invited);
2008-06-30
- 2008-07-03.
More information
-
F. Bleicher:
"Round Table -AnsysKonferenz";
Talk: CADFEM,
Linz (invited);
2016-04-22.
-
F. Bleicher:
"Schneidstoffe - Beschichtung - Werkzeuggeometrie: Möglichkeiten der Zerspanungsoptimierung";
Talk: Schneidstoffe - Technologische Trends,
St. Pölten (invited);
2009-09-17.
More information
-
F. Bleicher:
"Sensorik und Aktuatorikim System Werkzeug -Maschine -Prozess";
Keynote Lecture: WorkshopreiheFertigungstechnik/Maschinenbau - In-Prozess -Qualitätssicherung in Bearbeitungsmaschinen,
Schmalkalden;
2015-06-17.
-
F. Bleicher:
"Sensorische Werkzeugaufnahme zur In-Prozess-Regelung bei Zerspanungsvorgängen";
Talk: Fertigungstechnisches Kolloquium ETH-Zürich,
Hauptgebäude ETH Zürich, Hörsaal HG D1.2, Rämistrasse 101, 8092 Zürich (invited);
2019-10-02.
-
F. Bleicher:
"smart - factory Laboratory for High Tech Manufacturing";
Talk: Eröffnung des researchTUb Labors,
Wien, Aspern (invited);
2012-10-31.
-
F. Bleicher:
"Smarte Produktion; flexibel, wandlungsfähig und autonom";
Keynote Lecture: DBT - Digital Bussines Trends,
Haus der Musik (Wien) (invited);
2019-01-31.
-
F. Bleicher:
"Surface Modification by Machine Hammer Peening";
Talk: International Symposium on Process Signatures 2018,
Bremen (invited);
2018-11-13
- 2018-11-14.
-
F. Bleicher:
"System of systems for machining by standardized integration";
Talk: 2017 International Conference on Sustainable Manufacturing,
Shanghai (invited);
2017-10-27.
-
F. Bleicher:
"System of systems for machining by standardized integration";
Talk: Industrie 4.0,
Fa. Berndorf (invited);
2018-03-14.
-
F. Bleicher:
"Technologieentwicklung ";
Talk: AFA - Ausschuss für Arbeitstechnik - Zerspanung,
Wien;
2004-12-07.
More information
-
F. Bleicher:
"Transferzentrum - Entwicklung und Einsatzmöglichkeiten in der Automobilindustrie";
Talk: 4. Internationale Walter AG Automobiltage,
Tübingen (invited);
2010-11-23
- 2010-11-24.
-
F. Bleicher:
"Versuchsprogramm am LPT";
Talk: AFA - Ausschuss für Arbeitstechnik - Zerspanung,
Wien;
2007-06-25.
More information
-
F. Bleicher:
"Vom Zerspanungslabor zur Pilotfabrik "Industrie 4.0"";
Talk: OeCG,
Seestadt Aspern (invited);
2016-06-08.
-
F. Bleicher:
"Wettbewerbsfaktor Automatisierung";
Keynote Lecture: Ausseninstitut-Technologietransfer,
TU Wien (invited);
2006-05-30.
More information
-
F. Bleicher:
"Workshop Fibrecut - Institutsvorstellung";
Talk: 2. Workshop Fibrecut,
Wien;
2014-10-16.
-
F. Bleicher:
"Zerspanung von keramischen Werkstoffen mit mehrachsiger Schwingungsunterstützung";
Talk: Moderne Werkstoffe spanend bearbeiten,
Dortmund (invited);
2011-10-05
- 2011-10-06.
-
F. Bleicher, F. Akhavei:
"Digitaler Wandel in der Produktionstechnik";
Talk: Seminar - Industrie 4.0,
Althofen (invited);
2017-04-04.
-
F. Bleicher, F. Akhavei, G. Pöchgraber:
"Studie Supply Chain 4.0";
Talk: Seminar - Industrie 4.0,
Althofen (invited);
2017-04-04.
-
F. Bleicher, D. Berger:
"Methoden und Vorgehensweise bei F&E-Kooperationen am LPT";
Talk: Innovation in der Produktionstechnik,
TU Wien (invited);
2006-09-27.
More information
-
F. Bleicher, J. Bernreiter:
"HPC Bearbeitung - Leistungssteigerung im ELB-Tieflochbohren";
Talk: AFA - Ausschuss für Arbeitstechnik - Zerspanung,
TU Wien; Prechtl-Saal;
2008-11-12.
-
F. Bleicher, J. Bernreiter:
"Optimization of Cutting Processes by Multiaxial-Vibration Assisted Machining";
Talk: 61st CIRP General Assembly,
Budapest (invited);
2011-08-21
- 2011-08-27.
-
F. Bleicher, J. Bernreiter:
"Tribological effects of structured and intensified surfaces";
Talk: AFA - Ausschuss für Arbeitstechnik - Zerspanung,
TU Wien (invited);
2009-12-04.
-
F. Bleicher, J. Bernreiter, C. Einspieler:
"Comparison Of Different Measuring Methods For Positioning Of A Recording Device In Large Models";
Poster: ASMET Austrian Society for Metallurgy and Materials,
Leoben;
2009-09-23
- 2009-09-25.
More information
-
F. Bleicher, J. Bernreiter, T. Gröger:
"US-Actuator - Tests and Results";
Talk: CORNET Steering Committee Meeting,
Deggendorf (invited);
2009-06-18
- 2009-06-19.
-
F. Bleicher, J. Bernreiter, T. Gröger:
"US-Actuator -Practical und theoretical Approach";
Talk: CORNET Steering Committee Meeting,
Leuven (invited);
2009-02-11.
-
F. Bleicher, J. Bernreiter, M. Heger, H. Hulak, T. Gröger:
"Ultrasonic assisted machining";
Talk: CORNET Steering Committee Meeting,
Wien (invited);
2009-11-09
- 2009-11-10.
-
F. Bleicher, J. Bernreiter, B. Lauwers, P. Ten Haaf:
"Investigation of the Tool Life and the Process-Material Interaction in Ultrasonic Assisted Grinding of Si-SiC Ceramic Materials";
Talk: CIRP-2011 -HybP-1 Collaborative Working Group on Hybrid Processes,
Paris (invited);
2011-01-26.
-
F. Bleicher, S. Brandstetter, C. Dorn:
"Energie- und Condition Monitoring";
Talk: Condition Monitoring Forum 2012,
Köln (invited);
2012-01-24
- 2012-01-25.
-
F. Bleicher, S. Brandstetter, C. Dorn:
"Energiemonitoring für Zustandsbeurteilung aus Effizienzsicht";
Talk: Condition Monitoring Forum 2012,
Köln (invited);
2012-01-24
- 2012-01-25.
-
F. Bleicher, J. Brier:
"Schwingungsunterstützte Schleifbearbeitung";
Talk: Schweizer Schleif-Symposium 2016,
Zürich (invited);
2016-01-19
- 2016-01-20.
-
F. Bleicher, F. Dür, A. Dimitriou:
"Analyse Fa. Hörbiger Ventilwerke";
Talk: Vortrag bei der Fa. Hörbiger Ventilwerke,
Wien;
2012-05-02.
-
F. Bleicher, F. Dür, T. Flatz:
"5th User Group Meeting - Progress Report";
Talk: 5th User Group Meeting,
Wien;
2012-05-15.
-
F. Bleicher, F. Dür, T. Flatz:
"6th Steering Commitee Meeting - Progress Report";
Talk: 6th Steering Commitee Meeting,
Belgien;
2012-02-13
- 2012-02-14.
-
F. Bleicher, F. Dür, T. Flatz:
"7th Steering Commitee Meeting - Progress Report User Group Austria";
Talk: 7th Steering Commitee Meeting,
Aachen;
2012-05-23.
-
F. Bleicher, F. Dür, T. Flatz:
"Analyse der Blockdurchwärmung bei der Firma Worthington";
Talk: Vortrag bei der Firma Worthington,
Kienberg bei Gaming;
2012-09-06.
-
F. Bleicher, F. Dür, T. Flatz:
"Analyse des Heizenergiebedarfs der Shedhalle bei der Firma Flowserve";
Talk: Vortrag bei der Firma Flowserve,
Brunn/Gebirge;
2012-04-13.
-
F. Bleicher, F. Dür, T. Flatz:
"ECO²CUT - Ein ganzheitlicher Ansatz zur Energieoptimierung in Fertigungsbetrieben";
Talk: ECO²CUT - Ein ganzheitlicher Ansatz zur Energieoptimierung in Fertigungsbetrieben,
Wien;
2012-11-13.
-
F. Bleicher, F. Dür, T. Flatz:
"Energie-/Klimaziele - Herausforderung für Wirtschaft und Wissenschaft";
Talk: MC - Jahrestagung 2012,
St. Pölten (invited);
2012-06-25.
-
F. Bleicher, F. Dür, T. Flatz:
"Energieeffiziente Werkzeugmaschine";
Talk: MC-Workshop 2012,
Linz;
2012-05-08.
-
F. Bleicher, F. Dür, T. Flatz:
"Energietische Vermessung der Herbold Rohrmühle - Typ SMR 120/80 H12-3";
Talk: Vortrag in der Herbold Rohrmühle,
Traiskirchen;
2012-10-30.
-
F. Bleicher, F. Dür, T. Flatz:
"Messungen bei ACTech GmbH";
Talk: Vortrag für die Firma ACTech GmbH,
Wien;
2012-10-17.
-
F. Bleicher, F. Dür, T. Flatz, C. Salvatori:
"Vergleich verschiedener Linearantriebstechnologien";
Talk: Vortrag - Labor für Produktionstechnik,
Wien;
2012-11-05.
-
F. Bleicher, F. Dür, M. Hacksteiner:
"Energiemonitoring - Messung, Analyse & Optimierung";
Talk: Technologie-Workshop "Energieeffizienz - von der Pflicht zur Chance",
Wien (invited);
2015-03-19.
-
F. Bleicher, F. Dür, I. Leobner, I. Kovacic, B. Heinzl, W. Kastner:
"Co-simulation environment for optimizing energy efficiency in production systems";
Talk: 64th CIRP General Asembly,
Nantes (invited);
2014-08-24
- 2014-08-30.
More information
-
F. Bleicher, F. Dür, M. Stark:
"Energy Footprint Großblasanlage BA34.2/69";
Talk: Vortrag bei der Firma BEKUM Maschinenfabrik Traismauer GesmbH,
Traismauer;
2012-11-16.
-
F. Bleicher, C. Einspieler:
"Messtechnische Analyse von Zerspanungsprozessen";
Talk: AFA - Ausschuss für Arbeitstechnik - Zerspanung,
Wien;
2004-01-21.
More information
-
F. Bleicher, C. Einspieler, J. Bernreiter, B. Huber, N. Krouzecky:
"Development of a measuring system for analysis of hydraulic models in dimensions of 50 x 16m using the technology of numerical control";
Poster: 25th Danubia-Adria Symposium on Advances in Experimental Mechanics,
Budweis, Czech Republic (invited);
2008-09-24
- 2008-09-27.
More information
-
F. Bleicher, C. Einspieler, J. Bernreiter, B. Huber, N. Krouzecky:
"Development of a measuring system for the analysis of hydraulic models of the size of 50x16 m by the use of numerical control technology";
Poster: 25th Danubia-Adria Symposium on Advances in Experimental Mechanics,
Budweis and Krumlov (invited);
2008-09-24
- 2008-09-27.
-
F. Bleicher, T. Flatz, F. Dür, M. Stark:
"Analyse der Messung bei Schrenk GmbH";
Talk: Vortrag bei der Firma Schrenk GmbH,
Vitis;
2012-02-28.
-
F. Bleicher, P. Furtner:
"Reinraumtechnik - Aktuelle Trends";
Talk: Round Table Reinraumtechnik,
Villach (invited);
2006-09-28.
More information
-
F. Bleicher, Ch. Habersohn:
"Modellierung und Simulation einer Maschine";
Talk: MC-Workshop 2012,
Linz (invited);
2012-05-08.
-
F. Bleicher, Ch. Habersohn, M. Fuchs:
"Vibration Assisted Machining";
Keynote Lecture: 15. International Scientific Conference on Production Engineering - Computer Integrated Manufacturing and High Speed Maschining,
Vodice, Kroatien;
2015-06-10
- 2015-06-13.
-
F. Bleicher, M. Hienzsch, T. Kühn, M. Obermair, A. Raschendorfer:
"TEC_Sustainable Competitiveness through Network Collaboration";
Talk: Cornet Monitoring Meeting Warschau,
Warschau (invited);
2014-11-18.
-
F. Bleicher, B. Huber, K. Fuchs, C. Einspieler, J. Bernreiter, N. Krouzecky et al.:
"Comparison of different measuring methods for positioning of a recording device in large models";
Talk: 26th Danubia-Adria Symposium on Advances in Experimental Mechanics,
Leoben, Österreich (invited);
2009-09-23
- 2009-09-26.
-
F. Bleicher, H. Hunschofsky:
"A Chance for Reindustrialization?";
Talk: WU-Vortragsreiche-Industrie 4.0,
Wien (invited);
2019-10-23.
-
F. Bleicher, H. Hunschofsky, M. Hackhofer, F. Pauker, G. Mauthner:
"Hoerbiger 1-1-1";
Talk: Industry of Things World USA,
San Diego (invited);
2016-02-25
- 2016-02-26.
-
F. Bleicher, I. Kovac:
"Adaptive manufacturing with machinery system integration";
Talk: IMT 2010 - Tschechisch - Österreichisches Werkzeugmaschinenkolloquium,
Brünn (invited);
2010-09-16.
More information
-
F. Bleicher, S. Krall:
"Oberflächenmodifikation durch Machine Hammer Peening";
Talk: DGM-Fachausschüsse,
TU-Wien (invited);
2019-04-09
- 2019-04-10.
-
F. Bleicher, S. Krall, S. Gössinger, P. Schaubmayr, D. Nikolaev, M. Hoffmann, S. Maier, G. Mauthner:
"Hybride Fertigung mittels durchgängiger CAD/CAM Systemkette";
Talk: Austrian 3D-Printing Forum,
Tech Gate Vienna (invited);
2022-04-07.
-
F. Bleicher, C. Lechner:
"The use of MHP for modification and functionalization of surfaces";
Talk: 53. DGM - Fachausschuss Mechanische Oberflächenbehandlung,
Rastatt (invited);
2013-04-18.
-
F. Bleicher, C. Lechner, C. Kumpf:
"Vibration Assisted Machining";
Talk: 10th International Conference on Industrial Tools and Advanced Processing Technologies,
Ljubljana, Slovenia (invited);
2017-04-25.
-
F. Bleicher, C. Lechner, M. Obermair, Ch. Habersohn:
"Improving the over-all efficiency of mold and dies by functionalizing surfaces";
Keynote Lecture: MIT & SLIM 2013 - 12th International Conference on Management of Innovative Technologies,
Fiesa, Slowenien (invited);
2013-09-22
- 2013-09-24.
-
F. Bleicher, C. Lechner, R. Zemann, J. Sacherl:
"Investigation of the machining quality in processing FRP";
Talk: 65th The International Academy for Production Engineering General Assembly,
Cape Town, SA;
2015-08-23
- 2015-08-29.
-
F. Bleicher, N. Leder, P. Schörghofer:
"Sensorische Werkzeugaufnahme für die adaptive Steuerung von Zerspanungsprozessen";
Talk: PRÄZISIONSWERKZEUGE für die spanende Fertigung,
Stuttgart-Nürtingen (invited);
2019-02-26
- 2019-02-27.
-
F. Bleicher, N. Leder, P. Schörghofer, M. Brunnbauer:
"Adaptive und hybride Fertigungseinrichtungen";
Talk: DMG MORI bei HEITEC,
HEITEC Systemtechnik GmbH Betriebsgebiet Nord 47 3300 Ardagger-Stift (invited);
2019-06-26.
-
F. Bleicher, G. Mauthner:
"Digital Production - from material models ti circular economy";
Talk: European Forum Alpach 2021,
Alpach (invited);
2021-08-25.
-
F. Bleicher, T. Mikats, M. Heger, M. Fuchs, I. Ibrishimov, J. Gaschl:
"Fertigungssystem Mantis - Voith";
Talk: Vortrag für die Fa. Voith,
Heidenheim;
2012-11-22.
-
F. Bleicher, M. Obermair:
"IFT-Institute for Production Engineering and Laser Technology";
Talk: Institutsvorstellung,
VoestAlpine AG (invited);
2016-08-19.
-
F. Bleicher, M. Obermair, F. Dür, M. Hacksteiner:
"Balanced Manufacturing";
Talk: BAMA Konsortialmeeting,
Wien;
2014-11-27.
-
F. Bleicher, M. Obermair, F. Dür, M. Hacksteiner:
"eco2production - Engergiemanagement in Unternehmen";
Talk: Umwelttechnik - Tagung 2014,
Linz (invited);
2014-11-13.
-
F. Bleicher, M. Obermair, F. Dür, I. Leobner:
"BaMa - Balanced Manufacturing";
Talk: BaMa - Kickoff Meeting,
Wien;
2014-01-09.
-
F. Bleicher, M. Obermair, M. Hienzsch, T. Kühn:
"TEC -Total Efficiency Control: Kick-Off Meeting des Steuerungs-Komitees";
Talk: Kickoff-Meeting des Steuerungs-Komitees,
Aachen (invited);
2012-03-28.
-
F. Bleicher, C. Pollak:
"Vom Zerspanungslabor zur Pilotfabrik "industrie 4.0"";
Talk: Imagine 16 Die Zeit der großen Ideen,
Innsbruck (invited);
2016-06-08.
-
F. Bleicher, K. Ponweiser, T. Magyar, K. Orehounig, I. Leobner, F. Dür, T. Flatz, C. Reinisch, B. Heinzl, M. Rößler, W. Kastner:
"Interdisziplinäre Forschung zur Energieoptimierung in Fertigungsbetrieben - Ergebnisse 2011/12";
Talk: Konsortialmeeting 2012,
Wien;
2012-06-27.
More information
-
F. Bleicher, B. Schinkowitsch:
"Pilot & Innovations Fabrik für Industrie 4.0";
Talk: ProSTEP iViP Symposium 2016,
Stuttgart (invited);
2016-04-20
- 2016-04-21.
-
F. Bleicher, P. Schörghofer:
"Intelligente Werkzeug-und Prozesslösungen für eine vernetzte Produktion";
Talk: METAV 2016,
Düsseldorf (invited);
2016-02-23
- 2016-02-27.
-
F. Bleicher, W. Sihn:
"Integrated, scalable Concept of a Learning Factory";
Talk: Learning Factories Cooperation for excellence in teaching in the field of production technology,
Darmstadt (invited);
2011-05-20.
-
F. Bleicher, A. Siller:
"Zerspanung von Werkstoffverbunden in der Bearbeitung von Motorkomponenten unter Einsatz innengekühlter Werkzeuge";
Talk: PRÄZISIONSWERKZEUGE für die spanende Fertigung,
Stuttgart-Nürtingen (invited);
2017-02-21
- 2017-02-22.
-
F. Bleicher, A. Steininger:
"Additive Prozesskette zur Herstellung von optimierten Zerspan-Werkzeugen";
Talk: 3D-Printing-Forum,
Wien (invited);
2019-05-07.
-
F. Bleicher, A. Steininger:
"Aktive Beeinflussung von Tiefbohrprozessen zur Reduktion des Bohrungsmittenverlaufes";
Talk: VDI-Fachtagung Präzisions- und Tiefbohren aktuell 2017,
Stuttgart (invited);
2017-03-22
- 2017-03-23.
-
F. Bleicher, A. Steininger:
"Machining of material combinations using internally cooled cutting inserts";
Talk: MTTRF 2016,
San Francisco (invited);
2016-07-05
- 2016-07-07.
-
F. Bleicher, R. Stonawski, J. Platzer, P. Travnicek:
"Inkrementelles Freiformbiegen von Thermoplasten";
Talk: SKZ-Fachtagung,
Würzburg (invited);
2019-04-02
- 2019-04-03.
-
F. Bleicher, H. Weseslindtner:
"Fertigungstechnik der Zukunft";
Talk: AFA - Ausschuss für Arbeitstechnik - Zerspanung,
Wien;
2004-12-07.
More information
-
F. Bleicher, G. Wiesinger, C. Kumpf, D. Finkeldei, C. Baumann, C. Lechner:
"Schwingungsunterstützte Bearbeitung von CFK/Stahl-Hybridwerkstoffen";
Talk: AfA-Exkursion-Pöttinger,
PÖTTINGER Landtechnik GmbH: Industriegelände 1; 4710 Grieskirchen (invited);
2018-06-12.
-
F. Bleicher, G. Wiesinger, C. Sulz, F. Singer, C. Schwaiger:
"Vorstellung des Projektkonzeptes";
Talk: Kick off Meeting CDP MFP 32 Behringer AVK,
Wien;
2019-10-23.
-
J. Brier:
"Möglichkeiten der Zerspanung sprödharter Werkstoffe durch die Finite ElementeTheorie";
Talk: AfA-Jahresabschluss 2017,
Technologiezentrum aspern IQ / Pilotfabrik (invited);
2017-11-15.
-
C. Davutoglu, M.N. Durakbasa, E. Güclü, G. Bas:
"Improved Quality and Reliability in Telecommunication Network Testing by means of a Remote Online Test System";
Talk: 11th International Conference on Remote Engineering and Virtual Instrumentation REV2014,
Porto, Portugal;
2014-02-26
- 2014-02-28.
More information
-
J. Diebold:
"Bandsawing Workshop MCC";
Talk: Bandsawing Workshop MCC,
Kapfenberg (invited);
2020-10-01.
-
J. Diebold:
"Bandsawing Workshop MCC Bandsawing";
Talk: Sägeworkshop 2. Präsentation,
Kapfenberg (invited);
2021-12-06.
-
J. Diebold:
"Quarterly Meeting MCC Bandsawing";
Talk: Quartery Meeting 4 MCC Bandsawing,
Online Meeting (invited);
2020-12-07.
-
J. Diebold:
"Quarterly Meeting MCC Bandsawing 5";
Talk: Quarterly Meeting 5 MCC Bandsawing,
Online Meeting (invited);
2021-04-15.
-
J. Diebold:
"Quarterly Meeting MCC Bandsawing 6";
Talk: Quarterly Meeting MCC Bandsawing 6,
Wien;
2021-09-10.
-
J. Diebold, S. Bauer:
"Quartalsmeeting 2. Sägen";
Talk: Quarterly Meeting 2 MCC Bandsawing,
Online Meeting (invited);
2020-04-22.
-
J. Diebold, R. Gansberger, L. Weber, S. Bauer:
"Quarterly Meeting - MCC Bandsawing";
Talk: Quarterly Meeting - MCC Bandsawing,
TU-Wien;
2019-12-03.
-
J. Diebold, L. Pickel, L. Weber, S. Bauer, R. Gansberger:
"Workshop Bandsawing - MCC Bandsawing";
Talk: Workshop Bandsawing - MCC Bandsawing,
TU-Wien;
2019-09-23.
-
J. Diebold, G. Wiesinger, S. Krall:
"Quartalsmeeting 3. Sägen";
Talk: Quarterly Meeting 3 MCC Bandsawing,
Online Meeting (invited);
2020-08-19.
-
C. Dorn, F. Bleicher:
"Entgraten von Federbeinen - Endpräsentation";
Talk: Endpräsentation Entgraten von Federbeinen,
Wien (invited);
2010-05-05.
-
C. Dorn, F. Bleicher:
"Trockenbohren von Al-Druckgussteilen";
Talk: AFA - Ausschuss für Arbeitstechnik - Zerspanung,
Wien (invited);
2009-12-03.
-
C. Dorn, F. Bleicher, U. Renger, C. Salvatori, A. Dimitriou, J. Bernreiter:
"Energieeffiziente Produktion und Prozessoptimierung";
Talk: Workshop "Ressourceneffiziente Produktion",
Wien (invited);
2010-09-29.
-
C. Dorn, F. Bleicher, M. Stark:
"Energieoptimierter Einsatz in der Produktion";
Talk: AFA - Ausschuss für Arbeitstechnik - Zerspanung,
Wien (invited);
2009-10-14.
-
C. Dorn, I. Kovacic, I. Leobner, F. Bleicher, C. Achammer, K. Ponweiser:
"Interdisziplinäre Forschung zur Energieoptimierung in Fertigungsbetrieben";
Talk: sciencebrunch #1: Energieeffizienz in Industrie und Gewerbe,
Wien (invited);
2010-09-29.
-
F. Dür:
"Abschlussmeeting Projekt INFO";
Talk: Abschlussmeeting Projekt INFO,
Wien;
2013-06-10.
-
F. Dür:
"AP2 Implementierung E-Monitoring bei Firmenpartnern";
Talk: Cornet Eco2Produktion_Projekt-Team-Meeting,
Wien (invited);
2013-10-10
- 2013-10-11.
-
F. Dür:
"AP3 Forschungsstand Maschinen-/Prozessbenchmark";
Talk: Cornet Eco2Produktion_Projekt-Team-Meeting,
Wien (invited);
2013-10-10
- 2013-10-11.
-
F. Dür:
"AP4 Simulation und Energieplanung";
Talk: Eco2Production Projekt Team Meeting,
Wien (invited);
2013-10-10.
-
F. Dür:
"eco2production-Poster TUWin4.0";
Poster: Infoveranstaltung TUWin4.0,
Wien (invited);
2013-11-06.
-
F. Dür, F. Bleicher:
"Effizienzsteigerung durch Energiemonitoring";
Talk: 2. Seminar Energieeffizienz - Intelligente und energieeffiziente Produktion,
Messe Wien (invited);
2016-05-11.
-
F. Dür, M. Hacksteiner:
"Bearbeitungszentren HCX BA1173 und BA 1157 Energetischer Footprint";
Talk: Cornet Eco2Production_User Committee Meeting,
Korneuburg (invited);
2014-09-18.
-
F. Dür, M. Hacksteiner:
"eco2production - User Group Meeting";
Talk: Eco2Production - User Group Meeting,
Aachen (invited);
2014-05-15.
-
F. Dür, M. Hacksteiner:
"Energieeffizienz in der Produktion";
Talk: Ressourcen Initiative: Energieeffizienz=Produktionseffizienz,
St. Pölten (invited);
2014-09-11.
-
F. Dür, M. Hacksteiner:
"Energieeffizienz in der Produktion";
Talk: WKNOE Ressourcen Initiative: Energieeffizienz=Produktionseffizienz,
Amstetten (invited);
2014-11-20.
-
F. Dür, M. Hacksteiner:
"Fachvortrag Energieeffizienz in der Produktion";
Talk: AFA Exkursion zu Starlim//Sterner,
Marchtrenk (invited);
2014-09-24.
-
F. Dür, M. Hacksteiner:
"Lastganganalyse und Energiemonitoring";
Talk: Cornet Eco2Production_User Committee Meeting,
Korneuburg (invited);
2014-09-18.
-
F. Dür, M. Hacksteiner:
"Maschinenbenchmark EMCO Maxxturn 45";
Talk: Eco2Production - Steering Committee Meeting,
Wien (invited);
2014-10-21.
-
F. Dür, M. Hacksteiner:
"PT-Meeting";
Talk: Eco2Production - Steering Committee Meeting,
Aachen (invited);
2014-05-14.
-
F. Dür, M. Hacksteiner:
"Simulation von Produktionslinien unter Berücksichtigung energetischer Aspekte";
Talk: Cornet Eco2Production_User Committee Meeting,
Korneuburg (invited);
2014-09-18.
-
F. Dür, M. Hacksteiner, F. Bleicher:
"Energetische Analyse Feinbearbeitung AF 60A Krause Mauser PS Invers³ 0390.80";
Talk: Energetische Evaluierung von Werkzeugmaschinen - VW Werk,
Salzgitter (invited);
2014-11-06.
-
F. Dür, M. Hacksteiner, M. Lechner:
"Energetische Simulation von Produktionslinien";
Talk: Eco2Production - Steering Committee Meeting,
Wien (invited);
2014-10-21.
-
F. Dür, M. Hacksteiner, M. Obermair:
"Effizienzsteigerung durch Energiemonitoring";
Talk: Seminar Energieeffizienz,
TU Wien;
2015-05-28.
-
F. Dür, I. Leobner:
"Energieeinsparung durch effiziente Produktion und Infrastruktur";
Poster: Mehr Energieeffizienz! Zwischen EU-Richtlinie und Umsetzung - Impulse aus der Forschung,
TU Wien (invited);
2013-10-15.
-
F. Dür, B. Losert:
"Cornet Eco2Production";
Talk: Cornet Eco2Production_User Committee Meeting,
St. Pölten (invited);
2013-09-24.
-
F. Dür, B. Losert:
"Inhalte IFT Cornet Eco2Production";
Talk: Cornet Eco2Produktion_Projekt-Team-Meeting,
Wien (invited);
2013-10-10
- 2013-10-11.
-
F. Dür, M. Obermair, F. Akhavei, I. Leobner:
"Forschungsschwerpunkt Energieeffizienz";
Poster: Intertool - Internationale Fachmesse für Fertigungstechnik,
Wien;
2014-05-06
- 2014-05-09.
-
M.N. Durakbasa:
"Advanced 3D Metrology of microcomponents and nano-structures - challenges in the nextgeneration manufacturing industry";
Keynote Lecture: XIth International Scientific Conference "Coordinate Measuring Technique CMT",
Bielsko Biala (invited);
2014-04-02
- 2014-04-04.
-
M.N. Durakbasa:
"Advanced Integrated Systems In The Product Life Cycle For The Next Generation Of Factories In The Age Of Industry 4.0";
Keynote Lecture: 14th Internationale Logistics and Supply Chain Congress,
Izmir / TR (invited);
2016-12-01
- 2016-12-02.
-
M.N. Durakbasa:
"Advanced production and measurement technologies for quality based on integrated management systems on the way to the factory of the future";
Keynote Lecture: QIEM-ICNcT 2021 Joint conference "Quality and Innovation & Nonconventional Technologies in the post-pandemic world",
Online (invited);
2021-11-18
- 2021-11-19.
-
M.N. Durakbasa:
"Developments in Precision and Nano Metrology to Support and Improve Integrated Management Systems for Quality, Environment and Energy";
Keynote Lecture: CEO/CTO/NGO - PNU Pusan National University, School of Mechanical Engineering and the LINC,
Busan - Südkorea (invited);
2012-09-11.
-
M.N. Durakbasa:
"End-of-Life Management für die Nachhaltigkeit moderner Fertigungsprozesse";
Talk: Info-Veranstaltung: Innovationen für die "Fabrik der Zukunft",
Wien;
2008-04-03.
-
M.N. Durakbasa:
"Innovation and Sophisticated Metrology for Advanced Production Engineering - Integrated Management for Sustainabie Development";
Keynote Lecture: International Business Information Management Association Conference (IBIMA),
Wien;
2013-06-27
- 2013-06-28.
-
M.N. Durakbasa:
"Micro - Nano Manufacturing Metrology As A Part Of Advanced Manufacturing";
Keynote Lecture: International Conference Advanced Manufacturing as the Foundation for a Successful Society - Challenges and Opportunities for Advanced-industrialization of Serbia / Horizon 2020/2030 INDUSTRY 4.0.0 Serbian Program,
Belgrad, SERBIA (invited);
2016-05-31
- 2016-06-02.
More information
-
M.N. Durakbasa:
"Nano Teknolojİ Ve Nano Metrolojİ - Modern Hassas İmalat MühendİslİĞİnde İlerİ Teknolojİler";
Keynote Lecture: I Ulusal Kompozit Malzemeler Sempozyumu,
Izmir (invited);
2011-11-17
- 2011-11-19.
-
M.N. Durakbasa:
"Novel Trends in Advanced Production Systems and Multi Functional Intelligent Factories of the Future";
Keynote Lecture: MultiScience - XXXI. microCAD International Multidisciplinary Scientific Conference,
Miskolc, Hungary (invited);
2017-04-20
- 2017-04-21.
-
M.N. Durakbasa, J.M. Bauer:
"Developments in Sophisticated Precision Metrology and the Importance of Nanotechnology for Advanced Industrial and Manufacturing Systems";
Keynote Lecture: Iii Caim 2012 Tercer Congreso Argentino De Ingenieria Mecanica,
Buenos Aires - Argentinien (invited);
2012-10-02
- 2012-10-05.
-
M.N. Durakbasa, J.M. Bauer, G. Bas, D. Riepl:
"Micro And Nanometrology Laboratory Applications In Industry And Education By Telepresence And Teleoperation Remotely In The Global Village";
Talk: 11th International Conference on Remote Engineering and Virtual Instrumentation REV2014,
Porto, Portugal;
2014-02-26
- 2014-02-28.
More information
-
M.N. Durakbasa, J.M. Bauer, G. Bas, D. Riepl:
"Telepresence and Teleoperation in Work Concept of Multifunctional Intelligent Factories: Experience of Telepresence in the Micro and Nano Metrology Laboratory AuM-TU-Wien";
Talk: QIEM 2nd International Conference on Quality and Innovation in Engineering and Management,
Cluj-Napoca, RO;
2012-11-22
- 2012-11-24.
More information
-
M.N. Durakbasa, P.H. Osanna, G. Bas:
"Intelligent Design and Advanced Metrology to Support and Improve Integrated Management Systems for Quality, Environment and Energy in Production Engineering";
Keynote Lecture: QIEM 2nd International Conference on Quality and Innovation in Engineering and Management,
Cluj-Napoca, RO (invited);
2012-11-22
- 2012-11-24.
-
M.N. Durakbasa, P.H. Osanna, M.E. Yurci, J.M. Bauer:
"The Achievement Of Total Quality Management With Global International Cooperation Of Collaborating Small And Medium Sized Companies";
Keynote Lecture: 2nd INTERNATIONAL CONGRESS ON ENTREPRENEURSHIP,
Bishkek;
2008-05-07
- 2008-05-10.
-
M.N. Durakbasa, M.E. Yurci, A. Akdogan, S.B. Yildirim:
"Surface Roughness Measurement Uncertainties Both in Tactile and Optical Instruments";
Talk: QIEM 2nd International Conference on Quality and Innovation in Engineering and Management,
Cluj-Napoca, RO;
2012-11-22
- 2012-11-24.
More information
-
C. Einspieler:
"Entwicklung einer Messbrücke für die Untersuchung von Gerinnemodellen bis 50 x 16 Meter unter Einsatz der Numeric Control - Technik";
Talk: LabVIEW User Group Meeting,
Institut für Festkörperelektronik; Floragasse 7, 1040 Wien (invited);
2008-10-16.
More information
-
C. Einspieler, F. Bleicher:
"Messtechnische Analyse von Zerspanungsprozessen";
Talk: Ausschuss für Arbeitstechnik,
Wien (invited);
2004-01-21.
-
M. Fahrngruber, G. Wiesinger:
"Ergebnisse der Bohrversuche (Titanlegierung + Aluminium)";
Talk: 8. Projektmeeting "inForm" (AIT),
Wr. Neustadt (invited);
2017-02-21.
-
D. Finkeldei:
"Bearbeitung von schwer zerspanbarenWerkstoffen mit innovativen Werkzeugtechnologien";
Talk: Afa-Zerspanungsausschuß - Vorarlberg,
Vorarlberg, Wolfurth (invited);
2016-06-15.
-
D. Finkeldei:
"Bestimmung der spezifischen Schnittkräfte über eine mathematische Modellbildung";
Talk: AfA-Zerspanungsausschuß - Wien,
Meidling (invited);
2016-11-23.
-
D. Finkeldei:
"EP-Additivierung mit Wolframdisulfid (WS2)";
Talk: AfA-Jahresabschluss 2017,
Technologiezentrum aspern IQ / Pilotfabrik (invited);
2017-11-15.
-
D. Finkeldei:
"Zerspanung von Hochleistungswerkstoffen mit Keramikwerkzeugen";
Talk: AfA-Zerspanungsausschuß,
Wien Aspern (invited);
2015-11-25.
-
D. Finkeldei, F. Bleicher:
"Analysis of chip formationin machining nickel based and gamma titanium alloys";
Talk: Titanium USA 2018 Konferenz,
Las Vegas (invited);
2018-10-07
- 2018-10-10.
-
D. Finkeldei, F. Bleicher:
"Messsystematik mit rotatorischenKraftmessdynamometern";
Talk: AfA-Zerspanungsausschuß,
Wien Aspern (invited);
2015-11-25.
-
D. Finkeldei, G. Wiesinger, F. Bleicher:
"Results of the 3rdFiberCutBenchmark";
Talk: AfA Jahresabschluss 2018,
Institut für Fertigungstechnik und Hochleistungslasertechnik der TU Wien TEC-Lab Labor für Fertigungstechnik, Franz Grill Straße 4, Objekt 221, 1030 Wien (invited);
2018-11-21.
-
A. Fritsche, F. Bleicher:
"Dynamische Temperatur-Überwachung mittels eines neu konzipierten Messsystems unter Hochleistungsschleifbedingungen";
Talk: Schweizer Schleif-Symposium 2016,
Zürich (invited);
2016-01-19
- 2016-01-20.
-
J. Fröhlich, F. Bleicher:
"INDUSTRIE 4.0 an der TUW";
Talk: Bundesländerdialog 2016,
BMWFW im Palais Harrach (invited);
2016-03-15.
-
T. Frühwirth, I. Ayatollahi, F. Pauker, W. Kastner, B. Kittl, T. Trautner, G. Gridling:
"DigiTrans Modul3 - Praxistag 1: Integration";
Talk: DigiTrans 4.0 - Innovationslehrgang im Themenfeld Industrie 4.0,
Wien;
2016-09-01
- 2018-08-30.
More information
-
T. Frühwirth, I. Ayatollahi, F. Pauker, W. Kastner, B. Kittl, T. Trautner, G. Gridling:
"DigiTrans Modul3 - Praxistag 2: Automatisierungstechnik und automatisierte Fertigungssysteme";
Talk: DigiTrans 4.0 - Innovationslehrgang im Themenfeld Industrie 4.0,
Wien;
2016-09-01
- 2018-08-30.
More information
-
T. Frühwirth, I. Ayatollahi, F. Pauker, W. Kastner, B. Kittl, T. Trautner, G. Gridling:
"DigiTrans Modul3 - Praxistag 3: OPC Unified Architecture";
Talk: DigiTrans 4.0 - Innovationslehrgang im Themenfeld Industrie 4.0,
Wien;
2016-09-01
- 2018-08-30.
More information
-
T. Frühwirth, I. Ayatollahi, F. Pauker, W. Kastner, B. Kittl, T. Trautner, G. Gridling, C. Kudera, M. Kammerstetter:
"DigiTrans Modul3 - Praxistag 4: Security";
Talk: DigiTrans 4.0 - Innovationslehrgang im Themenfeld Industrie 4.0,
Wien;
2016-09-01
- 2018-08-30.
More information
-
R. Fürbacher, R. Zemann:
"Verfahren zur Vermessung und Qualitätsbewertung nach der Zerspanung von FKV";
Talk: Workshop FIBRECUT 2013,
Wien;
2013-11-13.
-
I. Gebeshuber, C. Dorninger, G. Liedl, A. Kaspar, T. Myerscough:
"HTL Spengergasse - Quo vadis (Podiumsdiskussion)";
Talk: Festakt 260 Jahre Spengergasse,
Wirtschaftskammer Wien;
2018-01-11.
-
G. Geiger:
"ACETAL Meeting ATZ-Entwicklungszentrum - Fortschrittsbericht";
Talk: ACETAL Meeting ATZ-Entwicklungszentrum,
Sulzbach-Rosenberg;
2012-01-31.
-
G. Geiger:
"ACETAL Meeting TU-Vienna - Abschlussbericht";
Talk: ACETAL Meeting TU-Vienna,
Wien;
2012-05-10.
-
G. Geiger:
"FFG Meeting Projekt Nanotool - Fortschrittsbericht";
Talk: FFG Meeting Projekt Nanotool,
Wien;
2012-03-21.
-
G. Geiger:
"Nanotool Meeting Celje";
Talk: Nanotool Meeting Celje,
Celje;
2012-05-22
- 2012-05-23.
-
G. Geiger:
"Nanotool Meeting Vienna - Fortschrittsbericht";
Talk: Nanotool Meeting Vienna,
Wien;
2012-10-02
- 2012-10-03.
-
G. Geiger, F. Bleicher:
"Optische 3D-Geometriemessung an Schneidwerkzeugen mit Infinite Focusam Beispiel von Drehversuchen";
Talk: AFA - Ausschuss für Arbeitstechnik - Zerspanung,
Wien (invited);
2009-12-03.
-
S. Gössinger, C. Lechner, B. Adjassoho:
"PROF4 - Application orientated investigations";
Talk: 4th Project Forum Densified Surfaces,
Wien;
2012-03-20.
-
S. Gössinger, C. Lechner, B. Adjassoho:
"PROF5 - Summary Working Plan Hydro";
Talk: 5th Project Forum - Densified Surfaces,
Innsbruck;
2012-12-05.
-
S. Gössinger, L. Pickel, F. Singer, T. Trautner:
"EIT-Manufacturing Project ideas";
Talk: voestalpine BÖHLER Profil GmbH,
TU-Wien Videovortrag (invited);
2020-03-03.
-
R. Gómez Vázquez, A. Otto:
"Improving Laser Manufacturing Processes B y Means of Multiphysics Simulations";
Talk: International Symposium for Production Research,
Vienna (invited);
2017-09-13
- 2018-09-15.
More information
-
R. Gómez Vázquez, A. Otto, G. Liedl, R. Feichtenschlager, C. Stiglbrunner, S. Tatra:
"Simulation of the Dissimilar Joining Process of Aluminum and Steel by Laser Assisted Wetting";
Talk: 12th International Conference on Numerical Methods in Industrial Forming Processes NUMIFORM 2016,
University of Technology of Troyes, Troyes (France);
2016-07-04
- 2016-07-07.
More information
-
T. Gratzer, E. Neckhaim, B. Mörzinger:
"Energiemonitoring, -simulation und -optimierung";
Talk: Bickpunkt Forschung,
TU-Wien (invited);
2017-09-20.
-
T. Gröger, F. Bleicher, J. Bernreiter, C. Schopf:
"Ultrasonic assisted grinding of brittle hard materials";
Talk: CORNET Monitoring Meeting,
Frankfurt (invited);
2009-12-09.
-
Ch. Habersohn:
"Aktuatorik im Spannsystem";
Talk: INNOVATIONSTAG - intelligente vernetzte Spanntechnik,
TEC-Lab Objekt221; Wien (invited);
2019-06-14.
-
Ch. Habersohn:
"Analytische Betrachtung des Hämmerprozesses mit Rückprall und der Einfluss von Systemparametern";
Talk: 3. Workshop MHP Aachen,
Aachen (invited);
2014-11-28.
-
Ch. Habersohn:
"cleanAIR - Cost effective, mobile air cleaner, which can additionally aerolise disinfectant, for public and private use";
Talk: EIT Manufacturing,
Slovenia online (invited);
2021-12-16.
-
Ch. Habersohn:
"Development of a Hammering Device";
Talk: 1st Project Forum - Densified Surfaces,
Wien (invited);
2010-12-02.
-
Ch. Habersohn:
"Elektromagnetisches Aktuatorsystem (accurapuls)";
Talk: Workshop Machine Hammer Peening 2013,
Wien;
2013-10-16.
-
Ch. Habersohn:
"InQCIM - Usermeeting";
Talk: InQCIM - Usermeeting,
TU-Wien (invited);
2021-11-24.
-
Ch. Habersohn:
"PROF4 - Hammering device investigations";
Talk: 4th Project Forum Densified Surfaces,
Wien;
2012-03-20.
-
Ch. Habersohn:
"The Machine Hammer Peening Hammering Device";
Talk: 2nd Project Forum - Densified Surfaces,
Wien (invited);
2011-04-15.
-
Ch. Habersohn, C. Lechner:
"PROF5 - Investigation of system parameter influence";
Talk: 5th Project Forum - Densified Surfaces,
Innsbruck;
2012-12-05.
-
M. Hacksteiner:
"Anwendung der mobilen Messtechnik";
Poster: Blickpunkt Forschung: Energie@TU Wien,
Wien (invited);
2015-09-28.
-
M. Hacksteiner:
"eco2production - ecological and economical production";
Talk: Blickpunkt Forschung: Energie@TU Wien,
Wien (invited);
2015-09-28.
-
M. Hacksteiner:
"Effizienzsteigerung durch Energiemonitoring";
Talk: enova 2015 Internationaler Knogress: Nachhaltige Gebäude,
Pinkafeld (invited);
2015-11-26
- 2015-11-27.
-
M. Hacksteiner:
"Energetische Analyse von Produktionssystemen";
Poster: Blickpunkt Forschung: Energie@TU Wien,
Wien (invited);
2015-09-28.
-
M. Hacksteiner:
"Energiemonitoring - Messung, Analyse, Optimierung";
Talk: Grundlagenvorlesung - Energieeffizienz,
TU Wien;
2015-04-16.
-
M. Hacksteiner:
"IFT Institute profile and TU Vienna research & transfer support";
Talk: GP Korea 2016,
Seoul, South Korea (invited);
2016-11-15
- 2016-11-16.
-
M. Hacksteiner:
"Industrial Energy Efficiency";
Poster: B2B Meetings/Eureka Innovation Event,
Basel (invited);
2014-11-19.
-
M. Hacksteiner, F. Bleicher:
"Condition Monitoring in der Pilotfabrik Automatische - Bewertungder Energieeffizienzund Produktivitätvon Werkzeugmaschinen";
Talk: 2. Seminar Energieeffizienz - Intelligente und energieeffiziente Produktion,
Messe Wien (invited);
2016-05-11.
-
M. Hacksteiner, R. Holzer:
"Praktische Potentiale durch Industrie 4.0 in der Produktion";
Talk: Smart Automation Linz,
Linz (invited);
2015-05-19
- 2015-05-21.
-
W. Hake, R. Zemann:
"Erkenntnisse aus Parameterversuchen bei der CFK-Zerspanung";
Talk: 2. Workshop Fibrecut,
Wien;
2014-10-16.
-
W. Hake, R. Zemann, F. Bleicher:
"Personen- und Maschinenschutz bei der Zerspanung von FKV";
Talk: Workshop FIBRECUT 2013,
Wien;
2013-11-13.
-
F. Heindl, M. Rodríguez Ripoll, M. Jech, C. Lechner, F. Bleicher:
"Tribological Properties of Different Materials treated with Machine Hammer Peening Technology for Incorporation of Hard Particles";
Talk: 19th International Colloquium Tribology,
Stuttgart, Ostfildern;
2014-01-21
- 2014-01-23.
-
M. Hennig, G. Reisinger, T. Trautner, P. Hold, D. Gerhard, A. Mazak:
"TU Wien Pilot Factory Industry 4.0";
Talk: 9th Conference on Learning Factories 2019,
Braunschweig;
2019-03-26
- 2019-03-28.
More information
-
R. Holzer, M. Hacksteiner:
"Praktische Potentiale durch Industrie 4.0 in der Produktion am Beispiel engergetischer Analysen";
Talk: Strategie-Forum Industrie 4.0,
Wien (invited);
2015-04-27.
-
R. Karl, F. Bleicher:
"Strahlschneideverfahren Schwerpunkt: Wasserstrahlschneiden";
Talk: Ausschuss für Arbeitstechnik,
Wien (invited);
2004-01-21.
-
B. Katalinic:
"Advanced Technologies for Developing Countries: Globalisation, Chances and Risks";
Talk: 2nd DAAAM International Conference Advanced Technologies for Developing Countries,
Tuzla (invited);
2003-06-26
- 2003-06-28.
-
B. Katalinic:
"Advanced Topics in History and Trends of Technology";
Talk: CEEPUS Project A-104 Intelligent Manufacturing & Automation,
Technical University, Cluj-Napoca, Romania (invited);
2002-02-27.
-
B. Katalinic:
"Applied Robotics";
Talk: CEEPUS Project A-104 Intelligent Manufacturing & Automation,
Technical University, Cluj-Napoca, Romania (invited);
2002-02-26.
-
B. Katalinic:
"Bionic Assembly Systems";
Talk: CEEPUS Project A-104 Intelligent Manufacturing & Automation,
MBA-EPF, Univ. of Maribor, Slovenia (invited);
2002-06-06.
-
B. Katalinic:
"Globalisation: New Possibilities and Risk Factors";
Talk: 1st European-Pacific Congress on Globalisation,
Vladivostok (invited);
2003-09-23
- 2003-09-26.
-
B. Katalinic:
"Intelligent Automation in the Manufacturing";
Talk: CEEPUS Project A-104 Intelligent Manufacturing & Automation,
Faculty of Mechanical Engineering, Brod, Croatia (invited);
2002-05-27
- 2002-05-31.
-
B. Katalinic:
"Intelligent Manufacturing and Automation";
Talk: CEEPUS Project A-104 Intelligent Manufacturing & Automation,
Faculty of Engineering, Rijeka, Croatia (invited);
2002-12-16
- 2002-12-20.
-
B. Katalinic:
"Intelligent Manufacturing Systems";
Talk: CEEPUS Project A-104 Intelligent Manufacturing & Automation,
Technical University, Cluj-Napoca, Romania (invited);
2002-02-27.
-
B. Katalinic:
"Intelligent Manufacturing Systems";
Talk: CEEPUS Project A-104 Intelligent Manufacturing & Automation,
MBA-EFP, Univ. of Maribor, Slovenia (invited);
2002-06-05.
-
B. Katalinic:
"Intelligent Manufacturing Systems: Actuale State and Developing Trends";
Talk: CEEPUS Project A-104 Intelligent Manufacturing & Automation,
MTF Trnava (Slovak Technical Universtiy), Slovakia (invited);
2002-12-10.
-
B. Katalinic:
"Intelligent Manufacturing Systems: Learning from Nature";
Talk: CEEPUS Project A-104 Intelligent Manufacturing & Automation,
Faculty of Engineering, Rijeka, Croatia (invited);
2002-04-22
- 2002-04-26.
-
B. Katalinic:
"International Scientific and Academic Cooperation in the Framework of DAAAM International: Past - Present - Future, Plenary Section - Key Note Lecture";
Talk: 13th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Learning from Nature',
Vienna, Austria (invited);
2002-10-23
- 2002-10-26.
-
B. Katalinic:
"Mechatronik / Robotik: Aktuelle Stand und Entwicklungstendenzen";
Talk: Science Week,
Wien (invited);
2003-05-16.
-
B. Katalinic:
"Megatrends in the Development of Technology and their Influence on the Relation on Man-Technology-Nature";
Talk: Dies Academicus - Tallinn Technical University - Doctor honoris causa speech,
Tallinn Estonia (invited);
2003-09-17.
-
B. Katalinic:
"Modelling Simulation and Calcualtion of Industrial Robots";
Talk: CEEPUS Project A-104 Intelligent Manufacturing & Automation,
Technical University, Cluj-Napoca, Romania (invited);
2002-02-26.
-
B. Katalinic:
"Robotics in Education";
Talk: 2nd International Conference on Robotics in Education,
Wien (invited);
2011-09-15
- 2011-09-16.
-
B. Katalinic:
"Technical Product as Materialisation of Engineers Idea and Design Strategy of Nature - Plenary Session - Key Note Lecture";
Talk: 12 International DAAAM Symposium, Jena, Germany, 24-27 October 2001,
Jena;
2002-10-24
- 2002-10-27.
-
B. Kittl:
"EDV-gestütztes Fertigungsmanagement";
Keynote Lecture: AFA - Ausschuss für Arbeitstechnik - Zerspanung,
Kapfenberg (invited);
2010-06-16.
-
B. Kittl:
"Entwicklung der IT in der Produktion";
Talk: Technologie und Gründerforum RIZ Waidhofen,
Waidhofen/Ybbs;
2007-04-19.
-
B. Kittl:
"Manufacturing Execution Systems";
Talk: Modellierung und Simulation für die Produktion - Aktuelles Know-How der TU Wien für Produktentwicklung, Fertigungstechnik und Prozesstechnik,
Technische Universität Wien (invited);
2008-11-06.
-
B. Kittl, J. Lewandowski, M. Buhl:
"Einsatz von ERP-Systemen in KMUs";
Talk: Pressefrühstück: Präsentation einer Studie über den Einsatz von ERP-Systemen in KMUs,
Wien;
2008-01-28.
-
B. Kittl, K. Matyas:
"EDV unterstützte Logistikplanung - Welche Arbeitserleichterungen bieten EDV Systeme";
Talk: Seminar Innerbetriebliche. flexible Logistikabläufe planen und umsetzen, Institute for International Research,
Wien (invited);
2003-10-20
- 2003-10-24.
-
B. Kittl, T. Trautner, W. Kastner, T. Frühwirth:
"Digital Transformation Manager (DTM) Course II Modul 7: Industrie 4.0 / IoT";
Talk: Digital Transformation Manager (DTM) Course,
Pilotfabrik Seestadt Aspern;
2019-10-18.
More information
-
B. Kittl, T. Trautner, W. Kastner, T. Frühwirth:
"Digital Transformation Manager (DTM) Course Modul 7: Industrie 4.0 / IoT";
Talk: Digital Transformation Manager (DTM) Course,
Pilotfabrik Seestadt Aspern;
2019-05-24.
More information
-
H. Koch, C. Kägler, A. Otto, M Schmidt:
"Analysis of Welding Zinc Coated Steel Sheets in Zero Gap Gonfiguration by 3D Simulations and High Speed Imaging";
Talk: IV International WLT Conference on Lasers in Manufacturing,
Munich;
2011-05-23
- 2011-05-26.
More information
-
I. Kovac, F. Bleicher:
"Sustainable Production with Machinery System Integration";
Talk: 6th-CSM-Forum-Finnland,
Tempere (invited);
2012-06-08.
-
I. Kovacic, I. Leobner, C. Reinisch, F. Dür, A. Dimitriou:
"Projekt INFO - Energy Efficient Production";
Talk: CEEMUT Cooperation Meeting 2012,
Wien;
2012-05-31
- 2012-06-02.
-
A. Koyun, M.E. Yurci, B. Sagbas, M.N. Durakbasa:
"Evaluation of temperature rise within articulating surfaces of artificial hip joint materials";
Talk: QIEM 2nd International Conference on Quality and Innovation in Engineering and Management,
Cluj-Napoca, RO;
2012-11-22
- 2012-11-24.
More information
-
S. Krall:
"Funktionalisieren von Oberflächen durch Mikrobearbeitung";
Talk: AfA-Jahresabschluss 2017,
Technologiezentrum aspern IQ / Pilotfabrik (invited);
2017-11-15.
-
S. Krall:
"Influence of machine hammer peening on the surface near material structure of stainless steel X5CrNi18-10";
Talk: 6. Workshop MHP,
TU-Wien (invited);
2017-11-22.
-
S. Krall:
"Robot Based Machine Hammer Peening";
Talk: 5. Workshop MHP,
Darmstadt (invited);
2016-11-02
- 2016-11-03.
-
S. Krall:
"Roboterbasiertes Machine Hammer Peening zur Oberflächenstrukturierung";
Talk: AfA-Ausschuss für Arbeitstechnik,
Wolfurt (invited);
2016-06-15.
-
S. Krall, U. Groza, Ch. Habersohn, F. Bleicher:
"Robot Based Machine Hammer Peening To Generate Defined Surface Structures";
Talk: 13th High Speed Machining Conference (HSM 2016),
Metz, Frankreich (invited);
2016-10-04
- 2016-10-05.
-
S. Krall, F. Pusavec:
"Kryogene Minimalmengenkühlschmierung";
Talk: AfA-Jahresabschluss 2021,
Online als Webinar (invited);
2021-11-24.
-
H. Lang, S. Lichtenberger:
"Fähige Prozesse in Verbindung mit Traceability zur Risikominimierung";
Talk: Business Forum Qualität,
Aachen;
2015-09-18.
-
N. Lasemi, G. Rupprechter, G. Liedl, D. Eder:
"Ultrashort laser ablation of Au-coated Ni foil and SiO2/Si targets in liquids: analysis of synthesized nanoparticles and ablation craters";
Talk: International Online Conference on Functional Materials,
Online;
2021-09-06
- 2021-09-08.
-
C. Lechner:
"Anwendungsspezifische Optimierung und Klassifizierung der maschinellen MHP-Oberflächenbehandlung";
Talk: AFA Exkursion zu SKF Österreich AG,
Steyr (invited);
2014-06-18.
-
C. Lechner:
"Fibre reinforced polymers as engineering materials";
Talk: AfA Jahresabschluss 2018,
Institut für Fertigungstechnik und Hochleistungslasertechnik der TU Wien TEC-Lab Labor für Fertigungstechnik, Franz Grill Straße 4, Objekt 221, 1030 Wien;
2018-11-21.
-
C. Lechner:
"Improving the functional characteristics of surfaces by machine hammer peening";
Talk: Wiener Produktionstechnik Kongress 2014,
Wien (invited);
2014-05-07
- 2014-05-08.
-
C. Lechner:
"Mechanismus der Oberflächenmodifikation durch Schlagverdichten";
Talk: AFA - Ausschuss für Arbeitstechnik - Zerspanung,
Wien (invited);
2011-11-23.
-
C. Lechner:
"Neueste Anwendungsgebiete für Laserabtragen, ECM elektrochemisches Erodieren, Funkenerosives Fräsen im Mikrobereich";
Talk: Neue Fertigungstechnologien am Markteintritt,
Wiener Neustadt;
2012-07-10.
-
C. Lechner:
"Oberflächenmodifikation durch die Technologie des Schlagverdichtens";
Talk: Technologietag Zum Thema "Verdichtungsklopfen",
Aflenz;
2012-05-15.
-
C. Lechner:
"Oberflächenmodifikation unter Einsatz der Technologie des Machine Hammer Peenings";
Talk: 3. Workshop MHP Aachen,
Aachen (invited);
2014-11-28.
-
C. Lechner:
"Potentiale und Anwendungsfelder der mechanischen MHP-Oberflächenbehandlung";
Talk: Workshop Machine Hammer Peening 2013,
Wien;
2013-10-16.
-
C. Lechner:
"PROF4 - Actual status of the project";
Talk: 4th Project Forum Densified Surfaces,
Wien;
2012-03-20.
-
C. Lechner:
"PROF4 - Surface topography";
Talk: 4th Project Forum Densified Surfaces,
Wien;
2012-03-20.
-
C. Lechner:
"PROF5 - Classification of machine hammer peening";
Talk: 5th Project Forum - Densified Surfaces,
Innsbruck;
2012-12-05.
-
C. Lechner:
"PROF5 - Embedding of coating materials - producibility and surface topography";
Talk: 5th Project Forum - Densified Surfaces,
Innsbruck;
2012-12-05.
-
C. Lechner:
"PROF5 - Structure and overview";
Talk: 5th Project Forum - Densified Surfaces,
Innsbruck;
2012-12-05.
-
C. Lechner:
"PROF_Work Package 2 "Hammering Process"";
Talk: PROF6_Project Forum Densified Surfaces,
Wien (invited);
2013-05-14.
-
C. Lechner:
"PROF_WP2 Hammering Process";
Talk: PROF7_Project Forum Densified Surfaces,
Wr. Neustadt (invited);
2013-09-24.
-
C. Lechner:
"The Machine Hammer Peening process";
Talk: 2nd Project Forum - Densified Surfaces,
Wien (invited);
2011-04-15.
-
C. Lechner, S. Gössinger:
"PROF5 - Mechanism of surface modification";
Talk: 5th Project Forum - Densified Surfaces,
Innsbruck;
2012-12-05.
-
C. Lechner, S. Gössinger, B. Adjassoho:
"Forschungsschwerpunkt Schlagverdichten - Überblick über aktuelle und zukünftige Forschungstätigkeiten";
Talk: 1. Fachforum Festklopfen,
Darmstadt;
2012-10-11.
-
K. Leitz, B. Redlingshöfer, Y. Reg, A. Otto et al.:
"Metal Ablation with Short and Ultrashort Laser Pulses";
Talk: 6th International WLT Conference on Lasers in Manufacturing,
München (invited);
2011-05-23
- 2011-05-26.
More information
-
I. Leobner, F. Dür, A. Werner:
"Energieeinsparung durch effiziente Produktion und Infrastruktur";
Talk: Mehr Energieeffizienz! Zwischen EU-Richtlinie und Umsetzung - Impulse aus der Forschung,
TU Wien (invited);
2013-10-15.
-
I. Leobner, C. Reinisch, F. Dür, K. Ponweiser, W. Kastner, F. Bleicher:
"INFO-Interdisziplinäre Forschung zur Energieoptimierung in Fertigungsbetrieben";
Talk: Science Brunch: Integrierte Energiesysteme,
Linz;
2012-06-03.
More information
-
J. Lewandowski, M. Buhl, B. Kittl:
"Einsatz von integrierter Software im Österreichischen Mittelstand";
Talk: Forum Metall,
Linz (invited);
2008-04-02.
-
S. Lichtenberger:
"Anforderungen an Traceability im Maschinenbau";
Talk: ERFA - Track and Trace - Nutzen für den Maschinen und Anlagenbau, VDMA Baden-Württemberg,
Denkendorf bei Stuttgart (invited);
2013-10-15.
-
S. Lichtenberger:
"Traceability";
Talk: Industrie- und Handelskammer Reutlingen - Netzwerk Logistik und Materialwirtschaft,
Rottenburg (invited);
2015-10-08.
-
S. Lichtenberger:
"Traceability - Qualitätsmanagement beim Zulieferer";
Talk: Management Circle,
München (invited);
2015-07-07.
-
S. Lichtenberger, A. Schloske:
"Qualitätsmanagement - Traceability und Rückrufmanagement";
Talk: Lehrveranstaltung Qualitätsmanagement,
Stuttgart;
2015-02-06.
-
G. Liedl:
"European System of Vocational Training in Laser Technology";
Talk: 8th International Conference Technology 2003,
Bratislava (invited);
2003-09-09
- 2003-09-10.
-
G. Liedl:
"Laser Ignition";
Talk: Laser Seminar/Mauterndorf,
Mauterndorf/Austria (invited);
2003-03-17
- 2003-03-21.
-
G. Liedl:
"Laseranwendungen in Wissenschaft und Technik";
Talk: HSC-Net,
Wien/Austria (invited);
2004-05-13.
-
G. Liedl:
"Laserzündung von direkteinspritzenden Ottomotoren";
Talk: Anwendertreffen Laserverbund Berlin-Brandenburg,
Wien/Austria (invited);
2004-10-22.
-
G. Liedl:
"Laserzündung von Motoren";
Talk: Argelas Generalversammlung,
Wien (invited);
2004-03-11.
-
G. Liedl, R. Bielak et al.:
"Joining of Aluminum and Steel in Car Body Manufacturing";
Talk: 6th International WLT Conference on Lasers in Manufacturing,
München;
2011-05-23
- 2011-05-26.
More information
-
G. Liedl, J. Bruckner, N. Enzinger, J. Ivanova, M. Pudar et al.:
"Laserschweißen von Stahl und Aluminium";
Talk: Hochleistungslaser-Forum,
Gmunden (invited);
2009-12-11.
More information
-
G. Liedl, G. Humenberger:
"Usage of emitted thermal radiation during laser processing of materials for quality control";
Keynote Lecture: Welding and Failure Analysis of Engineering Materials - WAFA 2018,
Aswan (invited);
2018-11-19
- 2018-11-22.
More information
-
G. Liedl, M. Mayr, K. Whitmore:
"Laser assisted joining of aluminum-copper";
Keynote Lecture: International Conference on Photonics Research (Interphotonics 2018),
Antalya (invited);
2018-10-08
- 2018-10-12.
More information
-
Z. Lin, J. Kleinert, S. Tatra, R. Gómez Vázquez, R. Bielak, A. Otto:
"3D Numerical Modeling of Short Pulsed Laser Micromachining Applications";
Talk: ICALEO 2017,
Atlanta, USA;
2017-10-26
- 2017-10-27.
More information
-
B. Mörzinger:
"Balanced Manufacturing";
Talk: Innovationsforum Energieeffiziente Produktion,
Linz (invited);
2017-11-13.
-
B. Mörzinger, F. Bleicher:
"Balanced Manufacturing: Datenbasierte - ModellbildungmittelsMachine Learning";
Talk: 2. Seminar Energieeffizienz - Intelligente und energieeffiziente Produktion,
Messe Wien (invited);
2016-05-11.
-
B. Mörzinger, F. Bleicher:
"Modeling, Simulation and Optimization of the Operation of Electric Chillers";
Talk: 6th International Symposium on Energy Challenges and Mechanics,
Inverness (invited);
2016-08-15
- 2016-08-17.
-
M. Obermair:
"Advanced Manufacturing Technologies for Aerospace";
Talk: U.S. - Austria Aerospace and Security S & T Conference,
Washington D.C. (invited);
2015-03-16
- 2015-03-19.
-
M. Obermair:
"Grüne Produktion durch Balanced Manufacturing";
Talk: Energie- und Ressourceneffizienz in der Lebensmittelbranche entlang der Wertschöpfungskette,
Linz (invited);
2015-02-24.
-
M. Obermair:
"Industrie 4.0 - Forschungs- und Tätigkeitsfelder des IFT";
Talk: BRP-Powertrain Kooperationsgespäch zu 4.0,
Gunskirchen (invited);
2015-04-24.
-
M. Obermair:
"Maßnahmen zur Ertragssteigerung durch Anwendung neuester Erkenntnisse aus der Produktionsforschung";
Talk: MC-Jahrestagung 2014 Mit Kompetenz in die Zukunft,
St. Pölten (invited);
2014-06-26.
-
M. Obermair:
"Moderne Fertigungsmethoden";
Talk: MCI Management Center Innsbruck - Technologie Workshop,
Innsbruck (invited);
2014-05-16.
-
M. Obermair:
"TEC - Total Efficiency Control";
Talk: AFA Exkursion zu BRP Powertrain,
Gunskirchen (invited);
2013-03-06.
-
M. Obermair:
"TEC Abschlusspräsentation";
Talk: 5. UC Meeting - TEC Abschlussmeeting,
Frankfurt;
2014-05-13.
-
M. Obermair, F. Dür:
"Forschungs- und Tätitigkeitsfelder";
Talk: Schaeffler Austria Kooperationsgespräch,
Wien;
2015-03-24.
-
M. Obermair, I. Leobner:
"BaMa für Industrie 4.0 - Virtualisierung der Produktion: Energiemonitoring, Simulation und Optimierung";
Talk: Industriebauseminar 2015,
TU Wien (invited);
2015-07-01
- 2015-07-03.
-
M. Obermair, S. Schmid:
"2. SC_Meeting_Präsentation";
Talk: TEC_2. Steuerungskomitee Meeting,
Wien;
2012-07-03.
-
M. Obermair, S. Schmid:
"TEC_UC1_Kickoff_Präsentation";
Talk: TEC_UC1_Kickoff_Meeting Wien,
Wien;
2012-05-10.
-
M. Obermair, S. Schmid, M. Hienzsch, T. Kühn:
"TEC_3. UC Präsentation";
Talk: 3. UC Meeting - Aachen,
Aachen;
2015-03-20.
-
M. Obermair, S. Schmid, M. Hienzsch, T. Kühn:
"TEC_Präsentation_2.UC Meeting";
Talk: TEC_2. UC Meeting,
Frankfurt (invited);
2012-10-31.
-
M. Obermair, S. Schmid, M. Hienzsch, T. Kühn:
"TEC_Präsentation_SC_Meeting";
Talk: TEC_3. Steuerungskomitee Meeting,
Frankfurt/Main (invited);
2012-10-30.
-
M. Obermair, S. Schmid, A. Raschendorfer, M. Hienzsch, T. Kühn:
"TEC_Präsentation 5. SC Meeting";
Talk: TEC_Präsentation 5. SC Meeting,
Wien;
2013-07-26.
-
M. Obermair, S. Schmid, A. Raschendorfer, M. Hienzsch, T. Kühn:
"TEC_UC_SC_Präsentation";
Talk: TEC_UC_SC_Meeting,
Wien;
2013-11-21.
-
P.H. Osanna, M.N. Durakbasa:
"Innovation in Production Metrology for Precision Engineering and to Support Sustainability and Improvement of Process and Product Quality in Modern Manufacturing Industry";
Keynote Lecture: 1st International Conference on Quality and Innovation in Engineering and Management QIEM 2011,
Cluj-Napoca, RO (invited);
2011-03-17
- 2011-03-19.
-
A. Otto:
"Process Simulations for Optimizing and Planning Laser Material Processing";
Talk: Photonics 4 Industrial Production,
Marriott Courtyard, Vienna, Austria (invited);
2018-10-29.
-
A. Otto, R. Gómez Vázquez:
"Fluid dynamical defect mechanisms in laser beam welding";
Talk: LPM2019 - The 20th International Symposium on Laser Precision Microfabrication,
International Conference Center Hiroshima, Japan (invited);
2019-05-21
- 2019-05-24.
-
A. Otto, R. Gómez Vázquez:
"Multiphysical Approach for the Simulation of Powder-based Laser Additive Manufacturing Processes";
Talk: OSA Laser Congress 2019,
Vienna (invited);
2019-09-29
- 2019-10-03.
-
A. Otto, R. Gómez Vázquez et al.:
"Modelling and Simulation of Laser Material Processes - Potentials of Numerical Simulations for Understanding, Planning and Optimizing Laser Welding Processes";
Talk: LASER World of PHOTONICS 2019 - Application Panel "Lasers Materials Processing - Modelling and Simulation of Laser Material Processes",
Munich, Germany (invited);
2019-06-24
- 2019-06-27.
-
A. Otto, H. Koch et al.:
"Numerical Simulation - A Versatile Approach for Better Understanding Dynamics in Laser Material Processing";
Talk: 6th International WLT Conference on Lasers in Manufacturing,
München (invited);
2011-05-23
- 2011-05-26.
More information
-
F. Pauker:
"Industrie 4.0 - Digitale Vernetzung in der Produkion";
Talk: Roundtable Industrie 4.0 - Vision und Wirklichkeit,
FH Joanneum, Graz (invited);
2015-10-15.
-
F. Pauker, F. Bleicher:
"OPC4Factory-OPC UA Kommunikationfür Fertigungszellen";
Talk: 2. Seminar Energieeffizienz - Intelligente und energieeffiziente Produktion,
Messe Wien (invited);
2016-05-11.
-
F. Pauker, T. Frühwirth, R. Hinterbichler, T. Bachmayr:
"OPC4Factory - Flexibel automatisierte Fertigungszellen";
Talk: Blickpunkt Forschung: Energie@TU Wien,
Wien (invited);
2015-09-28.
-
F. Pfefferkorn:
"Towards Multilayered Coatings using Friction Surfacing";
Talk: AfA-Jahresabschluss 2021,
Online als Webinar (invited);
2021-11-24.
-
L. Pickel:
"IN SITU Tool wear measurement";
Talk: The Ideation Connection #2 - EIT Manufacturing East,
TU-Wien Videovortrag (invited);
2021-01-18.
-
L. Pickel, G. Pöchgraber, F. Singer:
"Präsentation der Zwischenergebnisse: Machbarkeitsstudie für die Umsetzung einer 100%-Kontrolle im Kunststoffspritzguss";
Talk: BS-Modelshop GmbH,
TU-Wien Videovortrag (invited);
2019-02-20.
-
L. Pickel, S. Saric, F. Singer, G. Pöchgraber:
"Machbarkeitsstudie zur optischen Inline-Vermessung von geometrischen Merkmalen bei kaltgewalztem Bandstahl";
Talk: voestalpine BÖHLER Profil GmbH,
TU-Wien (invited);
2019-02-07.
-
L. Pickel, F. Singer, G. Pöchgraber:
"Abschlusspräsentation - VBA-Tool zur Aufbereitung von großen Rohdatenmengen";
Talk: voestalpine BÖHLER Profil GmbH,
TU-Wien (invited);
2020-01-31.
-
L. Pickel, F. Singer, G. Pöchgraber:
"Abschlusspräsentation: Machbarkeitsstudie für die Umsetzung einer 100%-Kontrolle im Kunststoffspritzguss";
Talk: BS-Modelshop GmbH,
TU-Wien Videovortrag (invited);
2019-05-27.
-
L. Pickel, F. Singer, G. Pöchgraber:
"EIT manufacturing project initiation: Development of a customizable modular machine vision system using standardized modules";
Talk: Technische Universität Braunschweig, University of Tartu und INESC TEC,
Technische Universität Braunschweig, University of Tartu und INESC TEC (invited);
2020-04-01.
-
L. Pickel, F. Singer, G. Pöchgraber:
"Machbarkeitsstudie: Optische Bauteildetektion als Teil des Materialflussprozesses mittels AGVs";
Talk: Concircle Management Consulting GmbH,
TU-Wien Videovortrag (invited);
2020-05-27.
-
L. Pickel, F. Singer, G. Pöchgraber:
"Umfrage zur Qualitätssicherunug";
Talk: ecoplus,
Online Meeting (invited);
2021-05-19.
-
G. Pöchgraber:
"Projektvorstellung: Coherent virtual representation of production systems";
Talk: Projektvorstellung - Coherent,
Online als Webinar (invited);
2020-03-31.
-
G. Pöchgraber:
"Smarte und souveräne Nutzung von Daten für die Produktion";
Keynote Lecture: Austrian Data Day,
Wien (invited);
2021-06-17.
-
G. Pöchgraber, F. Bleicher:
"Das Institut für Fertigungstechnik und photonische Technologien im Bereich der industriellen Forschung";
Talk: Das Institut für Fertigungstechnik und photonische Technologien im Bereich der industriellen Forschung,
Fa. Lindt Sprüngli. Trufo (invited);
2021-08-20.
-
G. Pöchgraber, F. Bleicher:
"Erstellung einer Zertifizierungsroadmap für smarte Komponenten in der Produktion";
Talk: Expertengespräch TÜV Austria,
TÜV Austria (invited);
2020-01-16.
-
G. Pöchgraber, F. Bleicher:
"Präsentation - Industriedesign";
Talk: Das Institut für Fertigungstechnik und photonische Technologien im Bereich der industriellen Forschung - Präsentation Industriedesign,
Universität für angewandte Kunst (invited);
2021-12-14.
-
G. Pöchgraber, G. Bohaty, J. Himmelbauer:
"Projekt Kick Off: Coherent virtual representation of production systems";
Talk: Projekt Kick Off,
Fa. KLATT/ Fa. Hörmann Logistik (invited);
2020-05-11.
-
G. Pöchgraber, G. Bohaty, J. Himmelbauer:
"Projekt Kick Off: Passagiergerechtes Self Servcie Stationendesign";
Talk: Projekt Kick Off: Passagiergerechtes Self Servcie Stationendesign,
Kunstuniversität Linz (invited);
2021-10-13.
-
G. Pöchgraber, G. Bohaty, J. Himmelbauer:
"Projektvorstellung: Coherent virtual representation of production systems";
Talk: Projektvorstellung: Coherent virtual representation of production systems,
Fa. Concircle (invited);
2021-06-02.
-
G. Pöchgraber, G. Bohaty, J. Himmelbauer:
"Projektvorstellung: Sicherheitskontrolle der Zukunft";
Talk: Projektvorstellung: Sicherheitskontrolle der Zukunft,
Fa. Materna (invited);
2020-07-13.
-
G. Pöchgraber, G. Bohaty, J. Himmelbauer:
"Projektvorstellung: Sicherheitskontrolle der Zukunft";
Talk: Projektvorstellung - Sicherheitskontrolle der Zukunft,
Fa. Hörmann Holding (invited);
2021-12-20.
-
G. Pöchgraber, G. Bohaty, J. Himmelbauer:
"Zwischenpräsentation: Coherent virtual representation of production systems";
Talk: Zwischenpräsentation: Coherent virtual representation of production systems,
Fa. Klatt;
2020-07-13.
-
G. Pöchgraber, F. Singer, L. Pickel:
"Digitalisierung in der Produktion im Zuge von Augmented Reality";
Talk: Digitalisierung in der Produktion im Zuge von Augmented Reality,
ZKW Group (invited);
2021-06-22.
-
G. Pöchgraber, F. Singer, L. Pickel:
"Vortrag: Machine Vision";
Talk: Vortrag: Machine Vision,
Fa. Moon Visin (invited);
2021-03-13.
-
W. Radkowitsch, K. Metzner, F. Bleicher, J. Bernreiter, C. Einspieler:
"Gerichtetes Einlippen Tieflochbohren";
Talk: VDI - Tagung,
Dortmund;
2006-03-16.
More information
-
A. Raschendorfer, F. Bleicher:
"Projektvorstellung "TEC 4.0 - Total Efficiency Control 4.0"";
Talk: 5. Treffen des Werkueugbau-Stammtisches,
Wiener Prater (invited);
2016-01-20.
-
A. Raschendorfer, F. Bleicher:
"Towards Autonomous Machining";
Talk: ICSM 2018,
Anting, Shanghai (invited);
2018-11-02.
-
M. Reiter:
"Mechanical functionalisation of cutting inserts by machine hammer peening";
Talk: 6. Workshop MHP,
TU-Wien (invited);
2017-11-22.
-
M. Reiter, F. Bleicher:
"Affectation of chip formation in single-lip deep hole drilling at small diameters by application of low-frequency vibration support";
Talk: HSM-Konferenz,
Prag (invited);
2019-10-08
- 2019-10-09.
-
M. Rodríguez Ripoll, F. Heindl, M. Jech, C. Lechner, Ch. Habersohn, F. Bleicher, B. Adjassoho, E. Kozeschnik, S. Gössinger, C. Bauer:
"Improving the tribological properties of functional surfaces using machine hammer peening";
Talk: 19th International Colloquium Tribology,
Stuttgart, Ostfildern;
2014-01-21
- 2014-01-23.
-
J. Sacherl, R. Zemann:
"Standzeituntersuchungen bei der Bearbeitung von CFK";
Talk: 2. Workshop Fibrecut,
Wien;
2014-10-16.
-
S. Schmid, M. Obermair, F. Bleicher:
"Generative Fertigungstechnologien";
Talk: Klausur WFL Millturn Technologies,
Bad Leonfelden (invited);
2014-02-10.
-
P. Schörghofer:
"Dyna-Tool -Potentiale sensorischer Werkzeuglösungen für die Zerspanungstechnik";
Talk: AfA-Exkursion-Hörbiger,
Seestadt (invited);
2017-03-08.
-
P. Schörghofer:
"myTool it Telemetrie - Echtzeitfähige Kommunikation";
Talk: INNOVATIONSTAG - intelligente vernetzte Spanntechnik,
TEC-Lab Objekt221; Wien (invited);
2019-06-14.
-
P. Schörghofer:
"Performanceverbesserung durch schwingungsgestützte Technologien";
Talk: INNOVATIONSTAG - intelligente vernetzte Spanntechnik,
TEC-Lab Objekt221; Wien (invited);
2019-06-14.
-
P. Schörghofer:
"Sensorischer Werkzeughalter";
Talk: e-Day:18,
WKO (invited);
2018-04-12.
-
P. Schörghofer, F. Pauker, N. Leder, J. Mangler, C. Ramsauer, F. Bleicher:
"Using Sensory Tool Holder Data for Optimizing Production Processes";
Talk: CIRP Sponsored Conference on Supervising and Diagnostics of Machining Systems,
KARPACZ, Polen;
2019-03-10
- 2019-03-14.
-
P. Schörghofer, C. Ramsauer, C. Wiedermann:
"Mach 4 Zero Defect";
Talk: EIT-M Summit 2020,
Paris (invited);
2020-12-10.
-
P. Schörghofer, C. Ramsauer, C. Wiedermann:
"sensor integrated machining for zero-defects";
Talk: EIT Manufacturing Summit 2021,
Online (invited);
2021-11-30.
-
A. Schütz:
"3D Druck Kompetenzzentrum";
Talk: Austria Printing Forum,
Wien, Novomatic Forum (invited);
2019-05-06
- 2019-05-08.
-
K. Schulmeister, C. Schmitzer, K. Duftschmid, G. Liedl, K. Schröder et al.:
"Secondary optical radiation og high power laser beam welding";
Poster: Proceedings IRPA,
Wien/Austria;
1996-04-14
- 1996-04-19.
-
V. Schulze, F. Bleicher, P. Groche, Y. Guo, Y. Pyune:
"Surface Modification by Machine Hammer Peening and Burnishing";
Keynote Lecture: 66th General Assemblyof CIRP 2016,
Guimaräes, Portugal (invited);
2016-08-21
- 2016-08-27.
More information
-
D. Schuöcker, A. Kratky, R. Bielak, M. Dolibasic, F. Klaas:
"Recent Progress and New Applications of Laser Assisted Metal Forming";
Talk: 5th Int. Conference "Beam Technolgies and Laser Application",
St. Petersburg, Russia;
2006-09-23
- 2006-09-27.
More information
-
D. Schuöcker, C. Stiglbrunner:
"ELARIX - EuroLaser Remote Internet Experiment";
Talk: Eulasnet,
Kopenhagen/Dänemark (invited);
2003-04-07
- 2004-04-08.
-
D. Schuöcker, C. Stiglbrunner:
"Remote CO2 laser cutting controlled via the internet";
Talk: Fachtagung LASTED.net,
Marseille;
2006-04-20.
-
C. Schwaiger:
"Energieeffizienz in der mechanischen Fertigung";
Talk: AfA-Webinar zum Thema "Energieeffiziente Zerspanung",
Online als Webinar (invited);
2021-03-24.
-
C. Schwaiger:
"Energiemessung: Feststellen der Effizienz in Produktionsprozessen und Anlagen";
Talk: AfA-Webinar zum Thema "Energieeffiziente Zerspanung",
Online als Webinar (invited);
2021-03-24.
-
M. Schwaiger, R. Zemann:
"Standzeituntersuchung an Werkzeugen mit geometrisch bestimmten Schneiden nach der Zerspanung von CFK";
Talk: Workshop FIBRECUT 2013,
Wien;
2013-11-13.
-
W. Sihn, F. Bleicher:
"Learning factories in operational application Integrated, scalable concept of a learning factory at the Vienna University of Technology";
Talk: 1st Conference on Learning Factories,
Darmstadt;
2011-05-19.
-
A. Siller:
"Parallele Bearbeitung eines Werkstoffverbundes mittels hybriden Kühlschmiersystems";
Talk: Ö-WPG-Dissertantenseminar,
Graz (invited);
2016-11-04.
-
F. Singer, L. Pickel, G. Pöchgraber:
"Airport Security 4.0 - Concept presentation of an embedded machine vision system";
Talk: Adaptive Vision Sp. z o.o.,
TU-Wien Videovortrag (invited);
2020-08-26.
-
F. Singer, L. Pickel, G. Pöchgraber, F. Bleicher:
"Feasibility study for optical detection of empty and contaminated trays in security checks via deep learning";
Talk: Adaptive Vision Sp. z o.o.,
TU-Wien Videovortrag (invited);
2020-07-06.
-
F. Singer, G. Pöchgraber, L. Pickel:
"Optische Qualitätskontrolle - Prozess- und Maschinenintegration sowie Anbindung via Web-Service";
Talk: Vorstellung IFT Optische QC,
ENGEL AUSTRIA GmbH (invited);
2020-06-30.
-
T. Sprenger, R. Zemann:
"Fibrecut - Benchmark 2014";
Talk: 2. Workshop Fibrecut,
Wien;
2014-10-16.
-
A. Stallforth, R. Zemann:
"Funktionalisieren von Bearbeitungsoberflächen bei Faserverbundbauteilen";
Talk: Workshop FIBRECUT 2013,
Wien;
2013-11-13.
-
F. Steiner, F. Bleicher, R. Vierlinger:
"Software and design concept for thermoplastic bending process in the application architecture";
Talk: 33rd Danubia Adria Symposium on Advances in Experimental Mechanics,
Portoroz, Slovenia (invited);
2016-09-20
- 2016-09-23.
-
A. Steininger:
"Analyse der Energieeffizienz in der spanenden Fertigung von prismatischen Bauteilen";
Talk: Vortrag bei der Firma Opel Wien,
Wien;
2012-03-13.
-
A. Steininger:
"Dynamisches Verhalten von Wendeplattenbohrwerkzeugen";
Talk: AfA-Jahresabschluss 2017,
Technologiezentrum aspern IQ / Pilotfabrik (invited);
2017-11-15.
-
A. Steininger:
"Gewindebohren mit KSS-Volumenstromumlenkung";
Talk: AFA Jahrestagung 2015,
Wien (invited);
2015-11-25.
-
C. Stiglbrunner:
"E-learning in der Lasertechnik";
Talk: Argelas Generalversammlung,
Arsenal, 1030 Wien (invited);
2004.
-
C. Stiglbrunner:
"Online Blick ins Applikationslabor an der TU Wien";
Talk: Fachtagung Wirtschaftkammer,
Wels, OÖ (invited);
2006-03-14.
-
D. Strasser, J. Brier, A. Steininger:
"Grundlagen zur Energieumsetzung in der Zerspanungszone";
Talk: AfA-Webinar zum Thema "Energieeffiziente Zerspanung",
Online als Webinar (invited);
2021-03-24.
-
C. Sulz, F. Stoop:
"Flottenlernen bei thermischer Fehlerkompensation für Werkzeugmaschinen";
Talk: Fertigungstechnisches Kolloquium ETH-Zürich,
Hauptgebäude ETH Zürich, Hörsaal ML, F39 (invited);
2021-12-01.
More information
-
T. Trautner:
"Sensorierung von Spannsystemen";
Talk: INNOVATIONSTAG - intelligente vernetzte Spanntechnik,
TEC-Lab Objekt221; Wien (invited);
2019-06-14.
-
T. Trautner, V. Henrich:
"EuProGigant: Technical Architecture";
Talk: Gaia-X Technical Expert Group,
Ö-Cloud Initiative (invited);
2021-12-13.
-
A. Weckenmann, M.N. Durakbasa:
"Testing for Industrie 4.0: Extended Specification, Advanced Measurement and Enriched Evaluation for Virtual Prediction of Functional Capability";
Keynote Lecture: Icpr-Aem & Qiem 2018,
Cluj Napoca, Rumänien (invited);
2018-07-25
- 2018-07-26.
-
T. Weiler, F. Bleicher:
"Die Fertigungszelle der Zukunft";
Talk: MC-Workshop 2012,
Linz (invited);
2012-05-08.
-
H. Weseslindtner:
"Standzeitkriterien bei der Bearbeitung von Zylinderköpfen bei der Firma BMW";
Talk: AFA - Ausschuß,
Institut für Fertigungstechnik, LPT, 1030 Wien;
2002-12-11.
-
H. Weseslindtner:
"Wissenschaftliche Projekte am Institut für Fertigungstechnik ";
Talk: 25. AWT-Sitzung,
Technische Universität Wien, Prechtlsaal;
2003-03-03.
-
G. Wiesinger, C. Baumann:
"Fibercut Benchmark 2017 / 2018";
Talk: AfA-Jahresabschluss 2017,
Technologiezentrum aspern IQ / Pilotfabrik (invited);
2017-11-15.
-
G. Wiesinger, M. Fahrngruber:
"Ergebnisse der Bohrversuche (Titan + Kupfer)";
Talk: 7. Projekt-Meeting AIT,
2352 Gumpoldskirchen (invited);
2016-10-25.
-
G. Wiesinger, D. Finkeldei, C. Baumann, F. Petzenhammer, F. Bleicher:
"Previous benchmarks at the TU Wien";
Talk: AfA Jahresabschluss 2018,
Institut für Fertigungstechnik und Hochleistungslasertechnik der TU Wien TEC-Lab Labor für Fertigungstechnik, Franz Grill Straße 4, Objekt 221, 1030 Wien (invited);
2018-11-21.
-
A. Wohltan, M. Ionce, N. Neuwirth, P. Widauer, E. Pils, I. Schreiber, R. Gómez Vázquez, C. Stiglbrunner, A. Otto:
"Optimisation of Data Compression of OpenFOAM Simulations Utilising a Newly Developed Approach";
Talk: 12th International Conference on Numerical Methods in Industrial Forming Processes NUMIFORM 2016,
University of Technology of Troyes, Troyes (France);
2016-07-04
- 2016-07-07.
More information
-
C. Yurci, A. Gunay Bulutsuz, M.N. Durakbasa:
"Performance Determination and Calibration of CMMs on the Basis of GPS Standards";
Talk: QIEM 2nd International Conference on Quality and Innovation in Engineering and Management,
Cluj-Napoca, RO;
2012-11-22
- 2012-11-24.
More information
-
R. Zemann:
"Am Anfang war alles leicht";
Talk: OEPG - 64. Jahrestagung,
Pöllau (invited);
2014-09-24
- 2014-09-27.
-
R. Zemann:
"FKV als Konstruktionswerkstoff";
Talk: Workshop FIBRECUT 2013,
Wien;
2013-11-13.
-
R. Zemann:
"Grundlagen zu Zerspanung von Faser-Kunststoff-Verbunden";
Talk: CoroPak 14.2,
Wien (invited);
2014-09-24.
-
R. Zemann:
"Initiative Fibrecut - Einfluss der Faserorientierung bei der Bearbeitung von CFK";
Talk: 2. Workshop Fibrecut,
Wien;
2014-10-16.
-
R. Zemann:
"Initiative Fibrecut - Forschungsbedarf bei der Zerspanung von FKV";
Talk: 2. Workshop Fibrecut,
Wien;
2014-10-16.
-
R. Zemann:
"Initiative Fibrecut - Spanbildung bei der Bearbeitung von CFK";
Talk: 2. Workshop Fibrecut,
Wien;
2014-10-16.
-
R. Zemann:
"Initiative Fibrecut - Zerspanung von Faserverbundstoffen";
Talk: Kunststoff-Cluster-Fachtagung,
Ennshafen/St. Valentin (invited);
2014-06-05.
-
R. Zemann:
"Kryogene Bearbeitung von CFK";
Talk: Workshop FIBRECUT 2013,
Wien;
2013-11-13.
-
R. Zemann:
"Spanende Bearbeitung von Faser-Kunststoff-Verbunden";
Talk: IVK Tagung - Interessensgruppe verstärkter Kunststoffe,
Mürzzuschlag (invited);
2015-10-15
- 2015-10-16.
-
R. Zemann:
"Technische Federn aus Faser-Kunststoff-Verbunden";
Talk: VDI Fachkonferenz - Fahrdynamik und vernetzte Regelsysteme,
Frankfurt (invited);
2014-12-02
- 2014-12-03.
-
R. Zemann:
"Verbesserungsansätze bei der Zerspanung von Faser-Kunststoff-Verbunden";
Talk: Workshop FIBRECUT 2013,
Wien;
2013-11-13.
-
R. Zemann:
"Zerspanung von Faser-Kunststoff-Verbunden";
Talk: PraxisForum+,
Besigheim (invited);
2015-11-12.
-
R. Zemann:
"Zerspanung von Faser-Kunststoff-Verbunden";
Talk: AFA Jahrestagung 2015,
Wien (invited);
2015-11-25.
-
R. Zemann:
"Zerspanung von Faser-Kunststoff-Verbunden";
Talk: Sandvik Workshop,
Wien (invited);
2015-10-21
- 2015-10-22.
-
R. Zemann:
"Zerspanung von Faserverbundwerkstoffen";
Talk: Ö-WPG Tagung,
Leoben (invited);
2014-10-02
- 2014-10-03.
-
R. Zemann:
"Zerspanungsworkshop: Grundlagen zur Zerspanung von Faser-Kunststoff-Verbunden";
Talk: Sandvik Zerspanungsseminar,
Wien (invited);
2014-10-09.
-
R. Zemann, F. Bleicher:
"Schwingungsunterstützte Bearbeitung von CFK";
Talk: Workshop FIBRECUT 2013,
Wien;
2013-11-13.
-
R. Zemann, F. Bleicher, R. Zisser-Pfeifer:
"Some practical contributions of the technology of electrochemical micromachining with ultra short pulses";
Talk: Insect 2011,
Wien (invited);
2011-11-03
- 2011-11-04.
-
R. Zemann, J. Sacherl, F. Bleicher:
"Untersuchung von Werkzeugen für die Zerspanung von FKV - Benchmark 2013";
Talk: Workshop FIBRECUT 2013,
Wien;
2013-11-13.
-
R. Zemann, G. Wiesinger:
"Ergebnisse der Drehversuche (Kupfer)";
Talk: 7. Projekt-Meeting AIT,
2352 Gumpoldskirchen (invited);
2016-10-25.
Patents
-
F. Bammer:
"Photoelastischer Modulator und Anwendungen";
Patent: Österreich,
No. AT 502 413;
submitted: 2006-01-18,
granted: 2007-03-15.
More information
-
F. Bammer:
"Photoelastischer Modulator und Anwendungen";
Patent: PCT,
No. PCT/AT06/000541;
submitted: 2006-12-27,
granted: 2009-01-19.
More information
-
F. Bammer:
"Polarisationsoptische Kombination von zeitlich versetzten, gepulsten Laserdioden zur Leistungssteigerung im Laserbündel";
Patent: PCT,
No. WO 2004/064208 A1 und PCT/AT04/000002;
submitted: 2004-01-12,
granted: 2005-07-12.
More information
-
F. Bammer:
"Verfahren und Vorrichtung zur Schaffung eines Laserstrahls hoher Brillanz";
Patent: EU,
No. EP1588462;
submitted: 2005-06-27,
granted: 2007-08-15.
More information
-
J.M. Bauer, M.N. Durakbasa, L. Kräuter, E. Capuano:
"Spielfreies Getriebe";
Patent: Österreich,
No. A 513/2014 516 423 B1;
submitted: 2014-06-07,
granted: 2016-08-15.
-
J.M. Bauer, M.N. Durakbasa, P.H. Osanna:
"Antrieb für einen Schwenkarm";
Patent: Österreich,
No. At 511 267 B1 2013-06-15;
submitted: 2010-11-05,
granted: 2013-06-15.
-
F. Bleicher:
"Kinematische Vorrichtung zum Bewegen eines Trägers";
Patent: Österreich, Deutschland, Frankreich, England, Italien, Spanien,
submitted: 2002-02-04.
More information
-
F. Bleicher:
"Parallelstabkinematische Anordnung auf Werkzeugmaschinen";
Patent: Österreich,
No. AT 004 741 U1;
submitted: 2000-07-05,
granted: 2001-11-26.
More information
-
F. Bleicher:
"Verfahren zur Herstellung eines Laufrades vom Typ Francis";
Patent: Österreich,
No. (*);
submitted: 2016-03-14,
granted: 2016-04-25.
-
F. Bleicher:
"Vibrationsunterstützte Drehbearbeitung";
Patent: Österreich,
No. A 50106/2012;
submitted: 2012-03-28,
granted: 2015-01-15.
-
F. Bleicher:
"Werkzeugmaschine";
Patent: Österreich,
No. AT 411 445 B;
submitted: 2001-09-03,
granted: 2004-01-26.
More information
-
F. Bleicher:
"Werkzeugmaschine mit stabkinematischer Positionierung einer Plattform";
Patent: Österreich,
submitted: 2002-05-15.
More information
-
F. Bleicher:
"Werkzeugmaschine mit stabkinematischer Positionierung von Werkzeugen und bzw. oder Werkstücken";
Patent: Österreich,
No. AT 410 292 B;
submitted: 1999-01-25,
granted: 2002-08-15.
More information
-
F. Bleicher:
"Werkzeugmaschine zur Schwerzerspanung";
Patent: Deutschlang,
No. DE 102004014912A1;
submitted: 2004-03-26,
granted: 2004-11-04.
More information
-
F. Bleicher, D. Berger:
"Bohr- und Fräsvorrichtung zur Minimierung der Ausfransung und Delamination bei der Bearbeitung von faserverstärkten Materialien";
Patent: Österreich,
No. A 373/2010;
submitted: 2010-03-09,
granted: 2011-01-10.
More information
-
F. Bleicher, D. Berger:
"Vorrichtung zur Bearbeitung eines Werkstücks";
Patent: Österreich,
No. AT509502B1;
submitted: 2011-09-15,
granted: 2013-06-15.
-
F. Bleicher, J. Bernreiter:
"Schwingtisch";
Patent: USA,
No. 14/118440;
submitted: 2012-05-18,
granted: 2016-05-24.
-
F. Bleicher, J. Bernreiter:
"Schwingvorrichtung mit Werkstückaufnahme und Ausgleichsmasse";
Patent: PCT,
No. Wo 2012/167288 A1;
submitted: 2012-05-18,
granted: 2014-09-17.
-
F. Bleicher, J. Bernreiter:
"Vorrichtung und Verfahren zur mechanischen Bearbeitung eines Werkstückes";
Patent: Österreich,
No. A 706/2011;
submitted: 2011-05-18,
granted: 2013-10-15.
-
F. Bleicher, A. Fritsche:
"Schleifscheibe mit Speichenrad";
Patent: Österreich,
No. 2b A 50731/2016-1;
submitted: 2016-11-01,
granted: 2017-06-08.
-
F. Bleicher, A. Fritsche:
"Trägerkörper für Schleifwerkzeuge";
Patent: Österreich,
No. A50731/2016;
submitted: 2016-08-11.
-
F. Bleicher, E. Haberda, F. Puschitz:
"Haarveredelung auf Basis von Klebetechniken";
Patent: Österreich,
submitted: 2004-02-05.
More information
-
F. Bleicher, Ch. Habersohn, M. Fuchs:
"Hauptspindel zur schwingungsunterstützten Bearbeitung mit Trägheitskrafttilgung";
Patent: Deutschen Patentamt,
No. DE 102015101167.0;
submitted: 2014-09-19.
-
F. Bleicher, Ch. Habersohn, M. Fuchs:
"PF Folgeanmeldung "Schwingspindel"";
Patent: Deutschen Patentamt,
No. DE102015101167;
submitted: 2014-09-19,
granted: 2014-09-22.
-
F. Bleicher, Ch. Habersohn, M. Fuchs:
"Spindelanordnung";
Patent: Deutschland,
No. De 10 2015 101 167 A1 2016.07.28;
submitted: 2015-01-27,
granted: 2016-07-28.
-
F. Bleicher, C. Lechner, M. Obermair:
"Oberflächenhämmern von generativ hergestellten metallischen Bauteilen";
Patent: Österreich,
No. TW0703;
submitted: 2015-04-10,
granted: 2018-04-16.
-
F. Bleicher, F. Puschitz:
"System zur Maschinenkalibrierung";
Patent: Österreich,
submitted: 2005-01-26.
More information
-
F. Bleicher, W. Radkowitsch, K. Metzner:
"Bohrer und Verfahren zum Bohren";
Patent: Österreich, Europa, USA, Südkorea, Japan, Indien, ...,
submitted: 2005-01-27,
granted: 2009-08-15.
More information
-
F. Bleicher, H. Weseslindtner:
"Verfahren zur Positionserkennung einer Bearbeitungsstelle eines Werkstücks mit wenigstens einer ebenen Oberfläche, insbesondere einer Platte";
Patent: Österreich,
No. At 406 915 B;
submitted: 1999-03-18,
granted: 2000-02-15.
More information
-
H. Caudr, T. Weiler, F. Bleicher:
"SKS - Aktuator für aktive Sicherheitssysteme an Kreissägen";
Patent: Österreich,
No. (*);
submitted: 2016-12-06,
granted: 2016-12-07.
-
S. Krall, F. Bleicher:
"Veränderung der Oberflächenintegrietät von Werkstoffen zur spanenden Bearbeitung mittels Oberflächenhämmern";
Patent: Österreich,
submitted: 2016-11-14.
-
S. Krall, C. Lechner, F. Bleicher:
"Beeinflussung der Randschichtzustände von Schienenlaufflächen zur Verbesserung der Oberflächenrauheit der Oberflächenhärte sowie der Druckeigenspannungen zur Minimierung von Geräuschemissionen bei gleichzeitiger Erhöhung der Dauer- und Verschleißfestigkeit durch Druckumformen";
Patent: Österreich,
No. MFL_22012018;
submitted: 2018-01-22.
-
S. Krall, C. Lechner, F. Bleicher, H. Watzinger, C. Rudig:
"Vorrichtung zur Nichtabrasiven Härtung von Schienekopfoberflächen";
Patent: PCT,
No. WO2019/227113A1;
submitted: 2019-05-21,
granted: 2019-12-05.
-
S. Krall, M. Prießnitz, F. Bleicher:
"Verfahren zur Bearbeitung eines einen Informationsbereich aufweisenden Bauteils, Bauteil mit einem Informationsbereich und Messsystem";
Patent: Österreich,
No. TW0706P-DE1;
submitted: 2018-11-13.
-
S. Krall, M. Prießnitz, F. Bleicher:
"Verfahren Zur Bearbeitung Eines Einen Informationsbereich Aufweisenden Bauteils, Bauteil Mit Einem Informationsbereich Und Messsystem";
Patent: PCT,
No. EP2019/080589;
submitted: 2019-11-07.
-
S. Krall, T. Weiler, F. Bleicher:
"Reluktanz-Linearaktor und damit ausgeführte Werkzeuge/Antriebe";
Patent: Österreich,
No. TW0705P-WO;
submitted: 2018-11-14.
-
G. Liedl, F. Nöbauer:
"Procedure for fastening a carbide tooth at a saw blade";
Patent: USA,
No. US 6310314 B2;
submitted: 2000-12-22,
granted: 2001-10-30.
More information
-
G. Liedl, F. Nöbauer:
"Verfahren zum Befestigen eines Hartmetallzahnes an einem Sägeblatt";
Patent: Österreich,
No. AT408080B;
submitted: 1999-12-27,
granted: 2001-01-15.
More information
-
F. Steiner:
"Einrichtung und Vefahren zum Biegen eines Profilelements";
Patent: Österreich,
No. AT514954;
submitted: 2014-04-09,
granted: 2015-05-15.
-
T. Weiler, H. Caudr, F. Bleicher:
"Sicherheitssystem für eine Werkzeugmaschine";
Patent: Österreich,
No. 17171966.9-1702;
submitted: 2017-05-19,
granted: 2017-07-12.
-
T. Weiler, H. Caudr, F. Bleicher:
"Verfahren zur Detektion eines Stoffes";
Patent: Österreich,
No. 16167511.1;
submitted: 2016-04-28.
Habilitation Theses
-
A. Afjehi-Sadat:
"Nonotechnology and Nanometrology for Mechanical Engineering Applications";
Technische Universität Wien, Fakultät für Maschinenwesen und Betriebswissenachaft,
2004.
-
F. Bammer:
"Single Crystal Photoe Elastic Modulators";
TU Wien/Fakultät Maschinenbau,
2008.
More information
-
F. Bleicher:
"Entwicklung einer parallelkinematischen Bohr- und Fräseinheit für den flexiblen Einsatz in automatisierten Anlagen";
Technische Universität Wien, Fakultät Maschinenbau,
2001.
More information
-
M.N. Durakbasa:
"Geometrical Product Specifications and Verification for the Analytical Description of Technical and Non-technical Structures";
Technische Universität Wien, Fakultät Maschinenbau,
2003.
-
G. Liedl:
"Laserzündung von Verbrennungsvorgängen";
TU Wien/Fakultät für Maschinenwesen und Betriebswissenschaften,
2006.
Doctor's Theses (authored and supervised)
-
H. Abrahams:
"Untersuchungen zum Führungsleistenverschleiß und zur Prozessdynamik beim BTA-Tiefbohren austenitischer Stähle";
Supervisor, Reviewer: D. Biermann, F. Bleicher;
TU Dortmund,
2016;
oral examination: 2016-11-07.
-
J. Adlmanniner:
"Eine Anwendung von fehlertoleranten vernetzten Rechnersystemen";
Supervisor, Reviewer: P. Kopacek, P.H. Osanna;
Institut für Mechanik und Mechatronik / Abt.6 Intelligente Handhabungs- und Robotertechnik,
2005.
-
F. Adunka:
"Genauigkeitsmindernde lnstallationseffekte in der Wärmeenergiemessung";
Supervisor, Reviewer: P.H. Osanna, E. Pucher;
Institut für Fertigungstechnik,
2005.
-
M. Afrasiabi:
"Thermomechanical Simulation of Manufacturing Processes Using GPU-accelerated Particle Methods";
Supervisor, Reviewer: F. Bleicher;
ETH-Zürich,
2020;
oral examination: 2020-06-04.
-
F. Akhavei:
"Optimierung der Auftragsabwicklung in der Einzel- und Kleinserienfertigung mittels flexibler Produkt- und integrativer Prozessentwicklung am Beispiel des Apparate- und Behälterbaus";
Supervisor, Reviewer: B. Kittl, D. Gerhard, A. Taudes;
E311,
2017;
oral examination: 2017-03-29.
-
B. Angerer:
"Automatic Streaming Service (ASS) – Ein XML basierter Dienst für einen automatisierten, flexiblen und offenen Datenaustausch in der Automatisierung";
Supervisor, Reviewer: B. Kittl;
E311,
2001.
More information
-
M. Ariöz:
"Datengetriebene Modellierung einer Hybridantriebskomponente zur Bestimmung der Degradierung";
Supervisor, Reviewer: E. Pucher, H. Kronberger, M.N. Durakbasa;
Fahrzeugantriebe und Automobiltechnik, E315,
2018.
-
H. Asanuma:
"Hard Ti-Al-N endowed with high heat resistance through alloying with lanthanoids";
Supervisor, Reviewer: P.H. Mayrhofer, F. Bleicher;
E308,
2019;
oral examination: 2019-05-25.
-
S. Ates:
"Empirical analysis of corporate energy management practices in energy intensive industries in Turkey and modeling energy efficiency and CO2 mitigation potential using the LEAP energy planning system";
Supervisor, Reviewer: M.N. Durakbasa, P. Kopacek, K. Matyas;
Fertigungstechnik und Hachleistungslasertechnik,
2011;
oral examination: 2011-12-19.
-
St. Auer:
"Harmonisierte Produktionsplanung in der variantenreichen Fließfertigung am Beispiel Fahrzeugbau";
Supervisor, Reviewer: W. Sihn, B. Kittl;
Institut für Managementwissenschaften; E311,
2016;
oral examination: 2016-02-10.
-
F. Badjgholi:
"Entwicklung eines Expertensystem-Prototypen zur Selektion der optimalen Werkzeuge bei spanabhebender Bearbeitung prismatischer Teile";
Supervisor, Reviewer: B. Kittl;
Institut für Fertigungstechnik,
2001.
-
A. Barth:
"Ein Beitrag zur zustandsorientierten Instandhaltung von Hydrogeräten für moderne Schienenfahrzeuge";
Supervisor, Reviewer: P. Kopacek, P.H. Osanna;
Institut für Mechanik und Mechatronik - Abteilung 6 Intelligente Handhabungs und Robotertechnik,
2007;
oral examination: 2007.
-
G. Bas:
"Energy management based model in advanced manufacturing industry enabled by nanotechnology";
Supervisor, Reviewer: M.N. Durakbasa, P. Kopacek, K. Matyas;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2013;
oral examination: 2013-05.
-
A. Bauer:
"Sicherheit u. Gefahr aus techn. Sicht, ausgehend vom akad. u. medialen Blickpunkt werden singuläre Ordnungsschemata erarbeitet u. Sicherheits-Strategien u. -Methoden beleuchtet u. optimal generiert";
Supervisor, Reviewer: P.H. Osanna, P. Kopacek;
Institut für Fertigungstechnik - Abteilung für Austauschbau und Messtechnik,
2007;
oral examination: 2007.
-
J.M. Bauer:
"Qualitätssicherung und die Erstellung von Qualitätssicherungssystemen an Organisationen für die universitäre Ausbildung von Ingenieurinnen";
Supervisor, Reviewer: P.H. Osanna, P. Kopacek;
311-3,
2003.
-
A.E. Beken:
"Die Umsetzung eines nachhaltigkeitsorientierten Total-Quality-Managements als vorbereitende Maßnahme zur Einführung eines Integrierten Managementsystems bestehend aus den Normen ISO 9001, ISO 14001 und ISO 50001";
Supervisor, Reviewer: M.N. Durakbasa, P. Kopacek, K. Matyas;
311-3,
2014;
oral examination: 2014-12-11.
More information
-
F. Bleicher:
"Untersuchung des Kühlschmierstoffeinsatzes in der Serienfertigung";
Supervisor, Reviewer: H. Weseslindtner, T. Varga;
Institut für Fertigungstechnik,
1996.
-
C. Buchner:
"Konzeptionierung und Validierung eines nationalen Bezugsnormals zur Darstellung der physikalischen Einheit Newton";
Supervisor, Reviewer: F. Bleicher, F.J. Maringer;
Institut für Fertigungtechnik und Hochleistungslasertechnik,
2015;
oral examination: 2015-12-09.
-
M. Buhl:
"Produktionsplanung und -steuerung in mittelständischen Unternehmen unter besonderer Berücksichtigung von Enterprise Resource Planning Systems";
Supervisor, Reviewer: K. Matyas, B. Kittl;
Institut für Fertigungstechnik; E330,
2008.
-
S. Celar:
"Konzept eines intelligenten Moduls für die Optimierung der Abläufe innerhalb des FFS";
Supervisor, Reviewer: B. Katalinic, F. Breitenecker;
Fertigungstechnik,
1997.
-
K. Daichendt:
"Ein modulares Softwaresystem zur Steuerung und Regelung von Demontage-(Montage-)Zellen";
Supervisor, Reviewer: P. Kopacek, P.H. Osanna;
Institut für Handhabungsgeräte und Robotertechnik,
2004.
-
A. Decker:
"Weiterentwicklung und Inbetriebnahme einer automatischen Infrarotentlötanlage für Leiterplatten";
Supervisor, Reviewer: P. Kopacek, P.H. Osanna;
Institut für Mechanik und Mechatronik / Abt.6 Intelligente Handhabungs- und Robotertechnik,
2005.
-
A. Delic:
"Brandschutz von Industriebauten der Papier- und Verpackungsindustrie im EU-Raum";
Supervisor, Reviewer: R. Heuer, F. Bleicher;
E249,
2011;
oral examination: 2011-03-30.
-
M. Drinek:
"Entwicklung eines Bildverarbeitungssystems für die Charakterisierung von bestückten Leiterplatten";
Supervisor, Reviewer: P. Kopacek, H. Osanna;
Institut für Handhabungsgeräte und Robotertechnik,
2003.
-
M. Dugolli:
"Bioclimatic architecture and home automation";
Supervisor, Reviewer: P. Kopacek, M.N. Durakbasa, K. Matyas;
Institut für Mechanik und Mechatronik; Institut für Fertigungstechnik und Hochleistungslasertechnik; E330,
2012;
oral examination: 2012-07-05.
-
G. Edinger:
"Experimentelle Untersuchungen zum tiefen Teillastbetrieb von Pumpturbinen";
Supervisor, Reviewer: C. Bauer, G. Liedl;
Institut für Energietechnik und Thermodynamik - E302,
2014;
oral examination: 2014-08-18.
-
A. Eidmann:
"Fahrzeug zu Infrastruktur (V2I) Echtzeit-Kommunikation für mobile Messsysteme";
Supervisor, Reviewer: E. Pucher, M.N. Durakbasa, P. Kopacek;
Fahrzeugantriebe und Automobiltechnik, E315,
2018.
-
C. Einspieler:
"Entwicklung Einer In-Prozess Werkzeugverschleissbestimmung Beim Tiefbohren In Austenitischen Stählen";
Supervisor, Reviewer: F. Bleicher, F.J. Maringer, J. Wassermann;
E311,
2017;
oral examination: 2017-12-19.
-
G. Fischer:
"Postgraduale Weiterbildung in Engineering Management";
Supervisor, Reviewer: P. Kopacek, P.H. Osanna;
Institut für Handhabungsgeräte und Robotertechnik,
2004.
-
M. Fischer:
"Validierungsstrategien von Laserstrahlschweißprozessen für mechanisch hochbeanspruchte Großbaugruppen in der Schienenfahrzeugindustrie";
Supervisor, Reviewer: G. Liedl, P. Kopacek;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2014;
oral examination: 2014-09-04.
-
A. Fritsche:
"Hub Design for the Reduction of Process Forced Vibrations in High Performance Grinding";
Supervisor, Reviewer: F. Bleicher, K. Wegener, P.H. Mayrhofer;
E311,
2017;
oral examination: 2017-01-09.
-
M. Fuß:
"Entwicklung und Anwendung eines Herstellungsverfahrens von tiefen Bohrungen mit nicht kreisförmigen Querschnitten";
Supervisor, Reviewer: M. Rabe, F. Bleicher;
UNI-Dortmund,
2019;
oral examination: 2019-06-07.
-
T. Gabmayer:
"Untersuchung der Effektivität verschiedener Steuereinrichtungen zur Beeinflussung des seitlichen Laufverhaltens von Edelstahlprozessbändern";
Supervisor, Reviewer: K. Hoffmann, B. Kittl;
Institut für Konstruktionswissenschaften und Technische Logistik E 307,
2011;
oral examination: 2011-06-16.
-
M. Gadjanski:
"Wasserstoff-Brennstoffzellenfahrzeuge im realen österreichischen Straßenverkehr";
Supervisor, Reviewer: E. Pucher, H. Kronberger, M.N. Durakbasa;
Fahrzeugantriebe und Automobiltechnik E315,
2017;
oral examination: 2017-02-13.
-
M. Gerstenmeyer:
"Entwicklung und Analyse eines mechanischen Oberflächenbehandlungsverfahrens unter Verwendung des Zerspanwerkzeuges";
Supervisor, Reviewer: B. Frohnapfel, F. Bleicher;
KIT-Fakultät für Maschinenbau Karlsruhe,
2018;
oral examination: 2018-09-12.
-
M. Gerstenmeyer:
"Entwicklung und Analyse eines mechanischen Oberflächenbehandlungsverfahrens unter Verwendung des Zerspanwerkzeuges";
Supervisor, Reviewer: B. Frohnapfel, F. Bleicher;
KIT-Fakultät für Maschinenbau,
2018;
oral examination: 2018-09-12.
-
R. Glawar:
"Vorgehensmodell zur Integration unterschiedlicher Instandhaltungsstrategien in der autonomen Produktionssteuerung";
Supervisor, Reviewer: K. Matyas, B. Kittl, M. Henke;
Institut für Managementwissenschaften; Inst. f. Fertigungstechnik u. Photonische Technologien; TU Dortmund,
2020;
oral examination: 2020-11-18.
-
S. Gössinger:
"Erweiterte Anwendungsmöglichkeiten von maschinellem Oberfächenhämmern im Kontext hydraulischer Strömungsmaschinen";
Supervisor, Reviewer: C. Bauer, F. Bleicher, B. Scheichl;
Institut für Energietechnik und Thermodynamik,
2014;
oral examination: 2014-12-15.
-
J. Gumpinger:
"Austenitic steels and titanium alloys for implants manufactured by the selective laser melting process";
Supervisor, Reviewer: S. Felber, G. Schneeweiß, G. Liedl;
Institut für Hochbau und Technologie,
2013;
oral examination: 2013-04-18.
-
Y. Guo:
"Sustainable Manufacturing_Energy-efficient Approach for Machining Processes";
Supervisor, Reviewer: B. Lauwers, F. Bleicher et al.;
Institut für Fertigungstechnik,
2017;
oral examination: 2017-01-31.
-
Ch. Habersohn:
"Analytische und simulative Betrachtung eines Oberflächenhämmerprozesses";
Supervisor, Reviewer: F. Bleicher, E. Kozeschnik;
Institut für Fertigungtechnik und Hochleistungslasertechnik,
2015;
oral examination: 2015-12-09.
-
M. Henerichs:
"Bohrbearbeitung von CFK unter besonderer Berücksichtigung der Schneidkantenmikrogeometrie";
Supervisor, Reviewer: K. Wegener, F. Bleicher;
Institut für Fertigungtechnik und Hochleistungslasertechnik,
2015;
oral examination: 2015-04-15.
-
N. Herzig:
"Erfassung und Beschreibung des skalierten Fließ-, Verfestigungs- und Versagensverhaltens ausgewählter metallischer Werkstoffe in einem weiten Bereich von Dehnungsgeschwindigkeiten und Temperaturen";
Supervisor, Reviewer: L. Meyer, F. Bleicher;
Lehrstuhl für Werkstoffe des Maschinenbaus, TU Chemnitz,
2008;
oral examination: 2008-09-26.
More information
-
T. Hrabal:
"Construction Project Management im Engineering Management Programm";
Supervisor, Reviewer: P. Kopacek, P.H. Osanna;
Institut für Mechanik und Mechatronik / Abt.6 Intelligente Handhabungs- und Robotertechnik,
2005.
-
M. Hubl:
"Kernparameter-orientierte Vorbereitung der Einführung von integrierten Standardsoftwaresystemen in mittelständischen Produktionsunternehmen";
Supervisor, Reviewer: B. Kittl;
Institut für Fertigungstechnik,
1999.
-
S. Jaumann:
"Flächiges Aerostatisches Führungssystem für Spanende Werkzeugmaschinen";
Supervisor, Reviewer: K. Wegener, F. Bleicher;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2012.
-
A. Kedir Biadgligne:
"Optimizing MRP Planning Parameters Using Lot Sizing Heuristics in ERP Systems";
Supervisor, Reviewer: K. Matyas, B. Kittl;
E330, E311,
2006;
oral examination: 2006-03-13.
-
G. Kocmann:
"End of life management of flatscreens";
Supervisor, Reviewer: P. Kopacek, P.H. Osanna;
Institut für Mechanik und Mechatronik - Abteilung 6 Intelligente Handhabungs und Robotertechnik,
2007;
oral examination: 2007.
-
V. Kordic:
"Arbeitszenarien und Optimierung von Abläufen und Steuerung von selbstorganisierenden Bionic Assembly System in CIM Umgebung";
Supervisor, Reviewer: B. Katalinic, U. Egly;
Institut für Fertigungstechnik,
2004.
-
L. Kräuter:
"Quality Assurance of Prototypes";
Supervisor, Reviewer: P.H. Osanna, P. Kopacek;
Institut für Handhabungsgeräte und Robotertechnik,
2004.
-
S. Krall:
"Beeinflussung Der Randschicht Durch Diskrete Mikroumformung";
Supervisor, Reviewer: F. Bleicher, K. Wegener, M. Weigand;
E311,
2019;
oral examination: 2019-10-04.
-
G. Kucera:
"Die wesentlichen Prozessparameter zur maschinellen Herstellung von Stampfkontakten für Kohlebürsten";
Supervisor, Reviewer: P. Kopacek, P.H. Osanna;
Institut für Handhabungsgeräte und Robotertechnik,
2004.
-
F. Lackner:
"Design and High Precision Monitoring of Detector Structures at CERN";
Supervisor, Reviewer: P.H. Osanna, P. Kopacek;
Institut für Fertigungstechnik - Abteilung für Austauschbau und Messtechnik,
2007;
oral examination: 2007.
-
N. Lasemi:
"Pulsed laser generation of colloidal nickel, iron, and tungsten-iron-oxide alloy core-shell nanoparticles";
Supervisor, Reviewer: P. Lieberzeit, G. Liedl;
Universität Wien, Fakultät für Chemie, Institut für Physikalische Chemie,
2017;
oral examination: 2017-06-21.
-
C. Lechner:
"Oberflächenmodifikation unter Einsatz der Technologie des Schlagverdichtens (Machine Hammer Peenings)";
Supervisor, Reviewer: F. Bleicher, C. Bauer;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2014.
-
J. Lewandowski:
"Produktionsplanung und -steuerung in mittelständischen Unternehmen unter besonderer Berücksichtigung von Manufacturing Execution Systems";
Supervisor, Reviewer: B. Kittl, K. Matyas;
Institut für Fertigungstechnik und Hochleistungslasertechnik; E330,
2011.
-
S. Lichtenberger:
"Entwicklung eines Modells zur Darstellung von Tracebilitydaten in Abhängigkeit von Tracebilityanwendungsfällen";
Supervisor, Reviewer: B. Kittl, D. Gerhard;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2016;
oral examination: 2016-06-07.
-
Y. Limani:
"A multi-criteria approach for sustainability concept of transport planning";
Supervisor, Reviewer: P. Kopacek, M.N. Durakbasa, K. Matyas;
Institut für Mechanik und Mechatronik; Institut für Fertigungstechnik und Hochleistungslasertechnik; E330,
2012;
oral examination: 2012-07-05.
-
B. List:
"Beitrag zur messtechnischen Beurteilung der hydraulischen Auslegung von Peltonturbinen mit Schwerpunkt auf Particle Image Velocimetry";
Supervisor, Reviewer: H. Matthias, H. Osanna;
Institut für Wasserkraftmaschinen und Pumpen,
2003.
-
B. Ljoljic:
"Kapazitätssteigerung und Durchlaufzeit Optimierung mittels Steuerungsart sowie struktureller Änderung eines komplexen flexiblen Montagesystems";
Supervisor, Reviewer: B. Katalinic, M. Gronalt;
Fertigungstechnik,
2003.
-
R. Ljuhar:
"Informationsschutz in der Produktentwicklung - ein neuer Lösungsansatz auf Basis der Pseudonymisierung";
Supervisor, Reviewer: D. Gerhard, F. Bleicher, G. Reinauer;
E307,
2017;
oral examination: 2017-06-29.
More information
-
D. Lund:
"Leistungssteigerung beim Metallbandsägen durch prozessabhängige Regelung der Sägebandspannung";
Supervisor, Reviewer: H.-C. Möhring, F. Bleicher;
TU-Stuttgart,
2020;
oral examination: 2020-08-19.
-
S. Mansour-Duschet:
"A Multiagent Design Methodology for the Manufacturing Execution System Domain";
Supervisor, Reviewer: B. Kittl, W. Kastner, A. Taudes;
E 311-01,
2020;
oral examination: 2020-12-11.
-
M. Masoumian:
"End-of-Life Management of Photovoltaics";
Supervisor, Reviewer: P. Kopacek, M.N. Durakbasa;
E325,
2014;
oral examination: 2014-05-26.
More information
-
A. Meltsch:
"Implementierung eines Qualitätsmanagementsystems im Lebensmittelhandel unter besonderer Berücksichtigung der HACCP Analyse";
Supervisor, Reviewer: G. Kroyer, P.H. Osanna;
Institut für Verfahrenstechnik, Umwelttechnik und Technische Biowissenschaften,
2008;
oral examination: 2008-11-24.
More information
-
M. Metzger:
"Innekonturieren und Walzen tiefgebohrter Grundbohrungen";
Supervisor, Reviewer: M. Rabe, F. Bleicher;
UNI-Dortmund,
2019;
oral examination: 2019-06-09.
-
G. Mörwald:
"Methodik zur Auslegung einer geometrisch definierten Mechanik zur Regelung von hydrostatischen Lagerungen";
Supervisor, Reviewer: F. Haas, F. Bleicher;
TU-Graz,
2016;
oral examination: 2016-10-03.
-
A. Müller:
"Application Potential of RFID Technology in Disassambly of ICT-Products";
Supervisor, Reviewer: P. Kopacek, P.H. Osanna;
Institut für Mechanik und Mechatronik / Abt.6 Intelligente Handhabungs- und Robotertechnik,
2005.
-
M. Nebenführ:
"Agency and Monitoring System";
Supervisor, Reviewer: B. Kittl;
Institut für Fertigungstechnik,
2000.
-
F. Öztürk:
"Entwicklung und Implementierung von Innovativen integrierten Managementsystemen in der Schienenfahrzeugindustrie - Qualität und Effizienzsteigerung für Unternehmen im Eisenbahnsektor";
Supervisor, Reviewer: M.N. Durakbasa, P. Kopacek, K. Matyas;
311-3,
2015;
oral examination: 2015-07-13.
-
U. Pala:
""Experimental Investigation and Modeling of Diamond Wire Sawing of Single-Crystal Silicon";
Supervisor, Reviewer: D. Kochmann, F. Bleicher;
ETH Zürich,
2019;
oral examination: 2019-10-18.
-
K. Pfadenhauer:
"Model Driven Service Architecture for the Shop Floor";
Supervisor, Reviewer: B. Kittl, S. Dustdar;
E311, E184,
2006;
oral examination: 2006-06-12.
More information
-
F. Puschitz:
"Kalibrieren von Werkzeugmaschinen mit Parallelkinematik - Bestimmung von bis zu sechs Freiheitsgraden einer Werkzeugmaschine mittels Planspiegelinterferometrie";
Supervisor, Reviewer: F. Bleicher, H. Stachel;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2010;
oral examination: 2010-11-26.
More information
-
B. Putz:
"Navigation mobiler, kooperativer Roboter";
Supervisor, Reviewer: P. Kopacek, P.H. Osanna;
Institut für Handhabungsgeräte und Robotertechnik,
2004.
-
M. Rahmani:
"Experimental and Numerical Investigations on Ball Bearing Linear Guides to Predict their Geometric Behaviour";
Supervisor, Reviewer: F. Bleicher, S. Felber, F. Fereshte-Saniee;
E311,
2017;
oral examination: 2017-06-19.
-
M. Reiter:
"Gezielte Beeinflussung der Spanbildung mittels Schwingungsunterstützung für das Einlippentiefbohren mit kleinsten Durchmessern";
Supervisor, Reviewer: F. Bleicher, D. Biermann, P.H. Mayrhofer;
E 311-01,
2020;
oral examination: 2020-10-27.
-
U. Renger:
"Strategischer Betriebsmitteleinsatz auf der Basis von Total Cost of Ownership";
Supervisor, Reviewer: F. Bleicher, K. Matyas;
Institut für Fertigungstechnik und Hochleistungslasertechnik; E330,
2010.
More information
-
M. Riester:
"Entwicklung eines Vorgehensmodells basierend auf Case-based Reasoning für die wissensbasierte Konfiguration von Service-Kits im Maschinen- und Anlagenbau am Beispiel von Gasmotoren";
Supervisor, Reviewer: K. Matyas, B. Kittl, M. Hompel;
Institut für Managementwissenschaften; Inst. f. Fertigungstechnik u. Photonische Technologien; TU Dortmund,
2020;
oral examination: 2020-12-16.
-
N. Schaal:
"Grundlagen der Schlichtbearbeitung mit Wiper-Geometrien";
Supervisor, Reviewer: D. Kochmann, F. Bleicher;
ETH Zürich,
2019;
oral examination: 2019-05-25.
-
J. Schmid:
"Digitalization in the Field of Machine Tools and Tool Management";
Supervisor, Reviewer: F. Haas, F. Bleicher;
TU-Graz,
2021;
oral examination: 2021-06-17.
-
P. Schörghofer:
"Autonome Fertigung durch Funktionen einer instrumentiertenWerkzeugaufnahme";
Supervisor, Reviewer: F. Bleicher, D. Gerhard, B. Kittl;
E 311-01,
2021;
oral examination: 2021-06-09.
-
A. Schumacher:
"Ein Bewertungsmodell für den Digitalisierungs- und Automatisierungsgrad produzierender Unternehmen";
Supervisor, Reviewer: W. Sihn, B. Kittl, T. Bauernhansl;
Institut für Managementwissenschaften; Inst. f. Fertigungstechnik u. Photonische Technologien; Universität Stuttgart;,
2020;
oral examination: 2020-09-28.
-
F. Schwarz:
"Simulation der Wechselwirkung zwischen Prozess und Struktur bei der Drehbearbeitung";
Supervisor, Reviewer: M. Zäh, F. Bleicher;
Institut für Werkzeugmaschinen und Betriebswissenschaften,
2010;
oral examination: 2010-08-06.
-
L. Seeholzer:
"Zerspanung von CFK und CFK/Aluminium-Stacks";
Supervisor, Reviewer: F. Bleicher;
ETH-Zürich,
2021;
oral examination: 2021-09-22.
-
K. Sen:
"Implementation of Sensor Based Intelligent Measurement and Digitalization of Monitoring in Food Production";
Supervisor, Reviewer: M.N. Durakbasa, P. Kopacek, E. Pucher;
Fertigungstechnik und Hochleistungslasertechnik,
2018.
-
A. Siller:
"Parallele Bearbeitung eines Werkstoffverbundes mittels hybriden Kühlschmiersystems";
Supervisor, Reviewer: F. Bleicher, K. Wegener, P.H. Mayrhofer;
E311,
2017;
oral examination: 2017-06-12.
-
G. Sommer:
"Robot Motion Planning with Genetic Algorithms";
Supervisor, Reviewer: P. Kopacek, P.H. Osanna;
Institut für Mechanik und Mechatronik / Abt.6 Intelligente Handhabungs- und Robotertechnik,
2005.
-
T. Sprenger:
"Anwendung des Drehzahlsynchron-Schleifprozesses zur Fertigung definierter Makro- und Mikrogeometrien";
Supervisor, Reviewer: F. Haas, F. Bleicher;
TU-Graz,
2021.
-
M. Stadler:
"Entwicklung eines selbstzentrierenden homopolaren Reluktanzmagnetlagers";
Supervisor, Reviewer: F. Bleicher, M. Haider, W. Drossel;
E 311-01,
2021;
oral examination: 2021-09-01.
-
M. Steffan:
"Machine-Tool for Research in Synchronous Grinding";
Supervisor, Reviewer: F. Haas, F. Bleicher;
TU-Graz,
2017;
oral examination: 2017-12-08.
-
M. Stoll:
"Die Weiterentwicklung von Organisationen u. zugehörigen Managementsystemen mit Förderung des Wissensmanagements durch den Einsatz einer konstruktivistischen organisationalen Lern- u. Wissensplattform";
Supervisor, Reviewer: P.H. Osanna, P. Kopacek;
Institut für Fertigungstechnik - Abteilung für Austauschbau und Messtechnik,
2007;
oral examination: 2007.
-
M. Stopper:
"Component Automation Network (CAN); Eine auf verteilten Komponenten basierende Interoperabilitätsarchitektur für die Automatisierung";
Supervisor, Reviewer: B. Kittl;
Institut für Fertigungstechnik,
2000.
-
K. Stuja:
"Die Optimierung von Fertigungsabläufen innerhalb eines Fertigungssystems für Drehteile bei beschränkter Anzahl der Fertigungsmittel";
Supervisor, Reviewer: B. Katalinic, F. Breitenecker;
E311,
2002.
-
H. Tahirova:
"TQM, LCA und Nachhaltige Entwicklung unterstützt durch intelligente flexible Metrologie und Demontage und Wiederverwertung gebrauchten Produkten in unterschiedlich industrialisierter Umgebung";
Supervisor, Reviewer: P.H. Osanna, P. Kopacek;
Institut für Mechanik und Mechatronik - Abteilung 6 Intelligente Handhabungs- und Robotertechnik,
2006;
oral examination: 2006.
-
Z. Tekic:
"Platforme Znanja Koncept, USLOVI NASTANKA I MODELI";
Supervisor, Reviewer: S. Stankovski, D. Kukolj, D. Spath, B. Katalinic, I Cosic;
Faculty of Technical Sciences, Univ.of Novi Sad,
2012;
oral examination: 2012-09-28.
-
D. Tóth:
"Experimentelle Untersuchung der CO2-Emissionen und limitierten Abgaskomponenten von Erdgasfahrzeugen im realen Straßenverkehr";
Supervisor, Reviewer: E. Pucher, P.H. Osanna;
Institut für Verbrennungskraftmaschinen und Kraftfahrzeugbau,
2009.
More information
-
D. Trauth:
"Tribology of Machine Hammer Peened Tool Surfaces for Deep Drawing";
Supervisor, Reviewer: G. Jacobs, F. Bleicher;
RWTH Aachen,
2016;
oral examination: 2016-01-17.
-
T. Trautner:
"Agile Automatisierung von Fertigungszellen - Semiotische Interoperabilität zustandsbehafteter, deterministischer Anlagenkomponenten";
Supervisor, Reviewer: B. Kittl, W. Kastner, F. Bleicher;
E 311-01,
2021;
oral examination: 2021-04-25.
-
J. Triebs:
"Analyse, Optimierung und Simulation des Energieumsatzes dezentraler Fluidkreisläufe von Werkzeugmaschinen";
Supervisor, Reviewer: C. Brecher, F. Bleicher;
Institut für Fertigungtechnik und Hochleistungslasertechnik,
2014;
oral examination: 2014-12-14.
-
R. Ullah:
"Thresholds for Laser-Induced Thermal Injury of Ex-vivo Bovine Retina Explant";
Supervisor, Reviewer: W. Husinsky, G. Liedl;
Institut für Angewandte Physik (IAP),
2010;
oral examination: 2010-12-17.
-
M. Vanparys:
"Ultrasonic Assisted Grinding Of Ceramic Components";
Supervisor, Reviewer: B. Lauwers, F. Bleicher;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2012.
-
R. Voß:
"Fundamentals of Carbon Fibre Reinforced Polymer (CFRP) Machining";
Supervisor, Reviewer: K. Wegener, F. Bleicher;
ETH Zürich,
2017;
oral examination: 2017-04-17.
-
C. Weidinger:
"Messgüte am Prüfstand für die Motorenentwicklung";
Supervisor, Reviewer: E. Pucher, P.H. Osanna;
E 315 Institut für Verbrennungskraftmaschinen und Kraftfahrzeugbau,
2002.
More information
-
L. Weilguny:
"Fertigungsgerechte Produktgestaltung mittels integrierter Produkt- und Prozess-Features - Knowledge-based Engineering unter Einsatz von Feature-Technologie in der Automobilindustrie";
Supervisor, Reviewer: D. Gerhard, B. Kittl;
Institut für Konstruktionswissenschaften und Technische Logistik,
2009;
oral examination: 2009-12-17.
More information
-
K. Yaghmaei:
"Direct and Indirect Methods for Micro/Nano Characterisation of Dimensional and Functional Properties of Engineering Surfaces";
Supervisor, Reviewer: P.H. Osanna, P. Kopacek;
Institut für Ferigungstechnik,
2005.
-
H. Yu:
"Free cutting of steel reinforced concretes";
Supervisor, Reviewer: S. Felber, F. Bleicher;
Institut für Hochbau und Technologie,
2010;
oral examination: 2010-11-04.
-
N. Zandi:
"Internationale Kooperation zusammenarbeitender Klein- und Mittelbetriebe";
Supervisor, Reviewer: P.H. Osanna, P. Kopacek;
Institut für Fertigungstechnik - Abteilung für Austauschbau und Messtechnik,
2007;
oral examination: 2007.
Diploma and Master Theses (authored and supervised)
-
R. Achleitner:
"Arbeitsplanerstellung durch Programmieren von Logiken anhand des Planungssystems ENGIN (Teilgebiet Fräsen)";
Supervisor: H. Weseslindtner;
E 311 Fertigungstechnik,
2001.
-
J. Aichinger:
"Alternative Methoden der mobilen Schneedichtemessung mittels CO2- und Diodenlaser";
Supervisor: G. Liedl;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2009;
final examination: 2009-10-14.
-
T. Alpay:
"Simulation einer Montagelinie von Straßenbahnen";
Supervisor: F. Bleicher, D. Berger;
Fertigungstechnik und Hochleistungslasertechnik,
2011.
-
M. Amon:
"Betriebsstättenplanung und funktionale Definition der Produktionsprozesse einer automatisierten Pelletieranlage unter Nutzung einer vorgegebenen Wärmeleistung sowie unter Verarbeitung der größtmöglichen Qualitätsbreite von Einsatzrohstoffen";
Supervisor: F. Bleicher;
Institut für Fertigungstechnik,
2006;
final examination: 2006-05-26.
More information
-
M. Anzenberger:
"Erstellung eines dynamischen Simulationsmodells zur Untersuchung des Übertragungsverhaltens eines Vorschubantriebes";
Supervisor: H. Weseslindtner, F. Bleicher;
Institut für Fertigungstechnik,
2000.
More information
-
M. Ariker:
"Messunsicherheit und praktische Anwendungen als Grundvoraussetzungen der Qualitätssicherung in der Produktion";
Supervisor: P.H. Osanna, A. Afjehi-Sadat;
Institut für Fertigungstechnik,
2003.
-
St. Auer, J. Weidenauer:
"MES - Manufacturing Execution Systems, Modellierung und Simulation einer Fertigungszelle in der diskreten Fertigung mit Hilfe einer MES-Software";
Supervisor: B. Kittl;
Institut für Fertigungstechnik,
2007;
final examination: 2007-11-28.
More information
-
I. Ayatollahi:
"Entwicklung eines OPC UA Servers für eine NC-Maschine";
Supervisor: B. Kittl;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2014;
final examination: 2014-04-07.
-
E. Badurek:
"Schichtweise Herstellung von Hartmetallwerkzeugen unter Anwendung des maschinellen Oberflächenhämmerns";
Supervisor: F. Bleicher, S. Krall;
E 311-01,
2021;
final examination: 2021-01-28.
-
F. Bärnthaler:
"Identifikation von stahlfremden Industrien und Prozessen als alternative Rohstoffquellen für Vanadium, Kobalt, Molybdän und Wolfram";
Supervisor: F. Bleicher, G. Wiesinger, J. Müller;
E 311-01,
2022;
final examination: 2022-02-23.
-
H. Bauernfeind:
"Konstruktion eines Holzspritzgießwerkzeuges für die Verarbeitung einer Holzformmasse";
Supervisor: H. Weseslindtner, F. Bleicher;
Institut für Fertigungstechnik,
1997.
More information
-
C. Baumann:
"Einfluss des ECAP-Prozesses auf das Drehen von Titanlegierung und Aluminium";
Supervisor: F. Bleicher, R. Zemann, G. Wiesinger;
E311,
2017;
final examination: 2017-06-26.
-
K. Benrajab:
"Sintergeschmiedete Pleuelstangen Herstellungsverfahren und Wirtschaftlichkeitsanalyse anhand von Zerspanungsversuchen";
Supervisor: F. Bleicher;
Institut für Fertigungstechnik,
2007.
More information
-
J. Berger:
"Steifigkeitsuntersuchung einer Werkzeugmaschine nach dem Prinzip der geschlossenen kinematischen Kette";
Supervisor: H. Weseslindtner, F. Bleicher;
Institut für Fertigungstechnik,
1999.
More information
-
J. Bernreiter:
"Beeinflussung des Bohrungsmittenverlaufes beim Bohren mit Einlippenbohrern";
Supervisor: H. Weseslindtner;
E 311 Fertigunstechnik,
2003.
-
C. Bichl:
"Konzeption und Entwicklung eines PPS-Moduls zur Geräteverwaltung";
Supervisor: B. Kittl;
E311,
2001.
-
M. Binaie:
"Evaluierung und Einführung eines Tool-Management- Systems in einem produzierenden Unternehmen";
Supervisor: F. Bleicher, F. Akhavei;
E311,
2017;
final examination: 2017-06-26.
-
R Bointner:
"Verbinden von Aluminium und Stahl mittels Laserstrahlschweißen";
Supervisor: G. Liedl;
E345 Institut für spanlose Fertigung und Hochleistungslasertechnik,
2006;
final examination: 2007.
-
P. Brandt:
"Schwingungsunterstütztes Bohren von Luftfahrtwerkstoffen";
Supervisor: F. Bleicher, C. Baumann, M. Prießnitz;
E 311-01,
2021;
final examination: 2021-09-24.
-
A. Braun:
"Einführung des ERP-Systems proALPHA im Fertigungstechnischen Labor des Instituts für Fertigungstechnik";
Supervisor: B. Kittl;
E311,
2002.
-
J. Brünner:
"Untersuchung des Werkzeugverschleißes in der Drehbearbeitung durch den Einsatz neuer Hartstoffschichten";
Supervisor: F. Bleicher, S. Krall, C. Baumann;
E 311-01,
2021;
final examination: 2021-01-27.
-
M. Brunnbauer:
"In-Prozess-Überwachung beim Wendeplattenbohren";
Supervisor: F. Bleicher, P. Schörghofer;
E 311-01,
2020;
final examination: 2020-12-17.
-
R. Büchele:
"Fertigungsplanung und Fertigungssteuerung bei Engel Austria - Situationsanalyse und Entwicklungsmöglichkeiten";
Supervisor: B. Kittl;
Institut für Fertigungstechnik,
2008;
final examination: 2008-02-19.
-
H. Candeger:
"Thermochemischer Speicher Planung eines Drehrohrreaktors für Kaltversuche";
Supervisor: A. Werner, J. Widhalm;
Institut für Energietechnik und Thermodynamik,
2017.
More information
-
A. Cocholous:
"Durchführung von Simulationen und idealisierten Schnittversuchen von Werkstoffverbunden";
Supervisor: F. Bleicher, A. Siller;
Institut für Fertigungstechnik und Hochleistungstechnik,
2015;
final examination: 2015-01-14.
-
G. Dachs:
"Einbindung eines Industrieroboters als Schnittstelle im Materialfluß einer flexiblen, automatisierten Fertigung";
Supervisor: H. Weseslindtner, F. Bleicher;
Institut für Fertigungstechnik,
1999.
More information
-
H. De Cillia:
"Versuchsplanung und praktische Anwendungen für die Qualitätssicherung in der Produktion";
Supervisor: P.H. Osanna, A. Afjehi-Sadat;
Institut für Fertigungstechnik,
2004.
-
M. Dinacher:
"Wirtschaftlichkeitsstudie zur Massenproduktion von Holzpellets";
Supervisor: H. Weseslindtner, F. Bleicher;
Institut für Fertigungstechnik,
1997.
More information
-
A. Donado Budino:
"Laser welding of aluminium and steel";
Supervisor: G. Liedl;
Umformtechnik und Hochleistungslasertechnik,
2008.
-
C. Dorn:
"Technische und wirtschaftliche Betrachtung der Automatisierung eines Entgratprozesses";
Supervisor: K. Matyas, F. Bleicher;
Institut für Fertigungstechnik; E330,
2008.
-
C. Dorn:
"Untersuchung des Verschleißverhaltens an Hand von Sägeketten";
Supervisor: H. Weseslindtner;
Institut für Fertigungstechnik,
2005.
-
P. Drobniak:
"Measurement of the state of polarisation of partially linear polarised infrared radiation by means of nematic liquid crystals";
Supervisor: G. Liedl, G. Humenberger;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2016;
final examination: 2016-11-16.
More information
-
P. Ebner:
"Kostenreduktion und Prozessoptimierung im Sonderapparatebau";
Supervisor: B. Kittl;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2011;
final examination: 2011-10-12.
-
W. Ebner:
"Messung ausgewählter Laserparameter sowie Korrelation mit Materialbearbeitung";
Supervisor: G. Liedl;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2009.
-
A. Eder:
"Konzeption eines automatischen Medikamentenlagers für Apotheken und Realisierung der Steuerung ";
Supervisor: H. Weseslindtner;
E 311 Fertigungstechnik,
2001.
-
E. Efler:
"Simulative evaluation of the energy demand for the centralized cooling lubricant supply of a production line for powertrain components";
Supervisor: F. Bleicher, M. Hacksteiner;
E311,
2019;
final examination: 2019-05-23.
-
C. Einspieler:
"Entwicklung und Realisierung einer Windkanalwaage";
Supervisor: A. Kluwick;
Institut für Stöhmungslehre,
2000;
final examination: 2000.
More information
-
S. Engleder:
"Analyse innovativer Produktionsstrategien unter Berücksichtigung der Wirtschaftlichkeit in der Blechfertigung der Firma Trumpf Werkzeugmaschinen GmbH + Co.KG";
Supervisor: H. Weseslindtner;
E 311 Fertigungstechnik,
2002.
-
I. Ereke:
"Verbindungstechnologien im Schienenfahrzeugbau";
Supervisor: F. Bleicher, D. Berger;
Fertigungstechnik und Hochleistungslasertechnik,
2011.
-
M. Fahrngruber:
"Einfluss des ECAP-Prozesses auf das Bohren von reinem Titan, Titanlegierung, Kupfer und Aluminium";
Supervisor: F. Bleicher, R. Zemann, G. Wiesinger;
E311,
2016;
final examination: 2016-12-15.
-
M. Ferrari:
"Aufbau und Test eines Messsystems zur Detektion thermischer Strahlung während der Lasermaterialbearbeitung";
Supervisor: G. Liedl, G. Humenberger;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2018;
final examination: 2018-11-14.
More information
-
N Filep:
"Untersuchungen zur Erfassung der polarisierten Strahlung mit Hilfe eines nematischen Flüssigkristalls und einer NIR-Kamera";
Supervisor: G. Liedl, G. Humenberger;
Institut für Fertigungstechnik und Photonische Technologien,
2019;
final examination: 2019-10-23.
-
K. Freundsberger:
"Analyse und Optimierung von Produktionsprozessen in der Abteilung Anarbeitung der VOEST ALPINE KREMS";
Supervisor: H. Weseslindtner, F. Bleicher;
Institut für Fertigungstechnik,
2001.
More information
-
H. Fritsche:
"Untersuchung der Zerspanbarkeit von Leichtmetall";
Supervisor: H. Weseslindtner, F. Bleicher;
Institut für Fertigungstechnik,
1997.
More information
-
V. Frossard:
"Vergleich von Deep Learning Algorithmen zur Zeitserienvorhersage in der medizinischen Verpackungsproduktion";
Supervisor: A. Friedl, J. Lohninger, B. Mörzinger;
Institut für Verfahrenstechnik, Umwelttechnik und Technische Biowissenschaften,
2020;
final examination: 2020-11-06.
-
R. Fürbacher:
"Erzeugen von Oberflächenstrukturen durch elektrochemische Mikrobearbeitung";
Supervisor: F. Bleicher, M. Nirtl;
E311,
2018;
final examination: 2018-02-27.
More information
-
H. Fuger:
"Projektierung einer wandlungsfähigen PUR-Gießanlage";
Supervisor: B. Kittl;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2014;
final examination: 2014-07-18.
-
P. Furtner:
"Simulation einer mechanischen Fertigung mit Arena 3.0";
Supervisor: H. Weseslindtner, F. Bleicher;
Institut für Fertigungstechnik,
2000.
More information
-
P. Furtner:
"Simulation einer Mechanischen Fertigung mit Arena 30";
Supervisor: H. Weseslindtner;
Fertigungstechnik,
2003.
-
T. Gabmayer:
"Pressenmechanisierung";
Supervisor: B. Kittl;
E311,
2006;
final examination: 2006-06-21.
-
A. Gailhofer:
"Geometrische Erfassung von frei geformten Objekten und deren Beurteilung mittels Koordinatenmesstechnik";
Supervisor: M.N. Durakbasa;
Fertigungstechnik,
2007;
final examination: 2007.
-
M. Gansberger:
"Qualitätsanforderungen und Genauigkeitsuntersuchungen in der Herstellung von hochleistungsfähigen Präzisionswerkzeugen";
Supervisor: M.N. Durakbasa;
Fertigungstechnik,
2008;
final examination: 2008.
-
R. Gansberger:
"Konstruktion eines Sägebandmessstandes zum optischen Messen von Sägebandparametern";
Supervisor: F. Bleicher, G. Wiesinger, J. Diebold;
E 311-01,
2020;
final examination: 2020-05-20.
-
E. Gittenberger:
"Machbarkeitsanalyse zur Automatisierung eines Trennvorganges an einer Stoffschneidemaschine";
Supervisor: K. Wally;
E 311 Fertigungstechnik,
2001.
-
E. Gomez:
"Setup of a cutting fiber laser system";
Supervisor: G. Liedl, A. Kratky;
Umformtechnik und Hochleistungslasertechnik,
2008.
-
R. Gómez Vázquez:
"Diode Laser based Particle Removal System";
Supervisor: G. Liedl;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2009.
-
N. Gonzalez Vila:
"Nitrogen Laser Construction";
Supervisor: G. Liedl;
Umformtechnik und Hochleistungslasertechnik,
2008.
-
C. Graff:
"Konfiguration einer ERP - Software für die TU Lernfabrik";
Supervisor: B. Kittl;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2015;
final examination: 2015-01-28.
-
M. Grill:
"Aufbau einer Faserlaser-Schweißanlage und anschließende Testschweißungen von Magnesium";
Supervisor: G. Liedl;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2011;
final examination: 2011-11-30.
More information
-
I. Guht:
"Produktionsstrategie Elektroantrieb: Gegenüberstellung der dezentralen und zentralen Produktion von Batteriemodulen";
Supervisor: B. Kittl, S. Krall;
E 311-01,
2021;
final examination: 2021-07-13.
-
W. Gutdeutsch:
"Auslegung eines vollautomatischen Fertigungssystems für die Herstellung von Industriekohlebürsten; Simulationsgestützte Auslegung eines flexiblen Fertigungssystems";
Supervisor: F. Bleicher;
Institut für Fertigungstechnik,
2005.
More information
-
E. Gutlederer:
"Werkzeugsoftware – Erstellung eines Anforderungsprofils zur Softwareauswahl. Themenvorschlag";
Supervisor: B. Kittl;
E311,
2001.
-
F. Haas:
"Optimierung eine Waffelbackautomaten";
Supervisor: H. Weseslindtner, F. Bleicher;
Institut für Fertigungstechnik,
1997.
More information
-
M. Hackhofer:
"Prozess Reengineering in einem Automobilzulieferbetrieb";
Supervisor: B. Kittl;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2010;
final examination: 2010-04-22.
-
O. Halik:
"Verbesserung des Einstechverhaltens beim Laserschneiden durch optimierte Ansteuerung einer Laserstrahlschneidanlage";
Supervisor: G. Liedl, G. Humenberger;
Institut für Fertigungstechnik und Photonische Technologien,
2021;
final examination: 2021-09-01.
-
S. Heidlmayr:
"Konstruktion und Aufbau einer Messvorrichtung zur Erfassung der Strahlungsemission beim CO2-Laserschneiden";
Supervisor: G. Liedl, G. Humenberger;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2013.
More information
-
J. Hernandez:
"Friction and wear reduction of cutting parts via surface patterning";
Supervisor: F. Bleicher, C. Lechner;
E311,
2019;
final examination: 2019-09-25.
-
J. Hinterauer:
"Prozess- und Informationsflussanalye";
Supervisor: B. Kittl;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2012;
final examination: 2012-06-20.
-
S. Höhne:
"Weiterentwicklung von Produktionsprozessen zur Herstellung von Magnetschienenbremsen";
Supervisor: B. Kittl;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2015;
final examination: 2015-11-24.
-
F. Hoffer:
"Entwicklung eines intelligenten Spannsystems für den Einsatz in der verteilten Fertigung";
Supervisor: C. Sulz, F. Bleicher;
Institut für Fertigungstechnik und Photonische Technologien,
2021.
More information
-
M. Hoffmann:
"Entwicklung eines Systems zur Feature-basierten Erfassung und Auswertung von Planungs-, Prozess- und Qualitätsdaten bei subtraktiven Bearbeitungen";
Supervisor: F. Bleicher, G. Mauthner;
E 311-01,
2021;
final examination: 2021-12-16.
-
R Hofmann:
"Synchrone Fertigung von Aircraftkomponenten";
Supervisor: F. Bleicher;
E311,
2017;
final examination: 2017-12-21.
-
F. Holzmüller:
"Untersuchungen zur Detektion von Schweißfehlern beim Laserstrahlschweißen von Metallen mit Hilfe einer NIR-Kamera";
Supervisor: G. Liedl, G. Humenberger;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2018;
final examination: 2018-09-26.
More information
-
M. Horvath:
"Der Blown-Powder-Prozess";
Supervisor: G. Liedl;
E345,
2002.
More information
-
G. Humenberger:
"Anwendung des Laserhobeln zur Gesenkreparatur von Druckgussformen";
Supervisor: G. Liedl;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2011;
final examination: 2011-01-26.
-
J. Hykel:
"Optimierung des Auftragsprozesses bei ENGEL Austria - Schwachstellenanalyse und Verbesserungsmöglichkeiten";
Supervisor: B. Kittl;
Institut für Fertigungstechnik,
2009;
final examination: 2009-06-25.
-
I. Ibrahimovic:
"Planung und Realisierung einer Roboter-Montagezelle";
Supervisor: H. Weseslindtner, F. Bleicher;
Institut für Fertigungstechnik,
2000.
More information
-
F. Incal:
"Entwicklung eines Galvanisierungsroboter für Zyanbäder";
Supervisor: B. Kittl;
Institut für Fertigungstechnik,
2001.
-
F. Incal:
"Entwicklung eines Galvano-Roboters";
Supervisor: B. Kittl;
E311,
2001.
-
D. Jaunecker:
"Entwicklung einer Spindeleinheit für das schwingungsunterstützte Mikrotiefbohren";
Supervisor: F. Bleicher, Ch. Habersohn;
E 311-01,
2021;
final examination: 2021-09-03.
-
A. Kärle:
"Entwicklung eines CASE-Tools als Bindeglied zwischen Delphi und Oracle";
Supervisor: B. Kittl;
E311,
2001.
-
M. Kandolf:
"Grundlagen zur Elastokinematik mit Faser-Kunststoff-Verbunden";
Supervisor: F. Bleicher, R. Zemann;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2014.
-
T. Karall:
"Einbindung einer Temperaturregelung in den Blown-Powder-Prozess ";
Supervisor: G. Liedl;
E345,
2002.
More information
-
D. Karl:
"Qualitärsregelkarten versus Precontrol";
Supervisor: P.H. Osanna, M.N. Durakbasa;
Fertigungstechnik,
2006;
final examination: 2006.
-
L. Kathan:
"Simulative Untersuchung des Energiebedarfs unterschiedlicher Hydraulikaggregate für Werkzeugmaschinen";
Supervisor: F. Bleicher, M. Hacksteiner;
E311,
2019;
final examination: 2019-06-12.
-
Z. Keskin:
"Bezüge und Bezugssysteme für geometrische Toleranzen";
Supervisor: M.N. Durakbasa, P.H. Osanna;
Fertigungstechnik,
2008;
final examination: 2008.
-
R. Khadra:
"Einsatz von Präzisionsmessgeräten im Feinstmesslabor";
Supervisor: P.H. Osanna, A. Afjehi-Sadat;
Institut für Fertigungstechnik,
2003.
-
R. Kleinhagauer:
"GPS als Basis für rationelle Prozesse und Produkttionen";
Supervisor: P.H. Osanna, A. Afjehi-Sadat;
E 311 Institut für Fertigungstechnik,
2005.
-
M. Klingenbrunner:
"Thermografie bei inkrementellen Kunststoffumformen - Untersuchung des Wärmeeinflusses auf Verfahrensgrößen";
Supervisor: F. Bleicher, F. Steiner;
Fertigungstechnik und Hochleistungslasertechnik,
2016;
final examination: 2016-10-25.
-
F. Kloibhofer:
"Simulationsbasierte Optimierung der Betriebsstrategie von energietechnischen Anlagen";
Supervisor: F. Bleicher, B. Mörzinger;
E311,
2018;
final examination: 2018-04-26.
-
E. Kocbay:
"Mechanisches Modell zur Ermittlung der Steifigkeit des Wellenaufbaus eines Walzgerüstes";
Supervisor: F. Bleicher, M. Lamprecht, M. Leonhartsberger, Y. Vetyukov, M. Krommer;
E311,
2019;
final examination: 2019-09-27.
-
M. Kornberger:
"Entwicklung und Realisation einer Heuaufbereitungsanlage";
Supervisor: H. Weseslindtner, F. Bleicher;
Institut für Fertigungstechnik,
1997.
More information
-
A. Kratky:
"Untersuchungen von Anwendungen eines Diodenlasers am Beispiel Hartmetallschweißen";
Supervisor: G. Liedl, D. Schuöcker;
E345 IFLT,
1999;
final examination: 1999-06-30.
More information
-
F. Lang:
"Prozessmodellierung für eine flexible Fertigungszelle";
Supervisor: B. Kittl, T. Trautner;
E 311-01,
2020;
final examination: 2020-02-27.
-
C. Lechner:
"Technologie des 3D-Abtragslasern";
Supervisor: F. Bleicher;
Institut f. Fertigungstechnik und Hochleistungslasertechnik,
2011;
final examination: 2011-03-24.
-
S. Lehner:
"Reduzierung des Umkehrspiels eines KUKA KR 500-3 MT Industrieroboters";
Supervisor: F. Bleicher;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2014.
-
W. Leinweber:
"Einsatz von Ultraschall in der industriellen Fertigungstechnik";
Supervisor: H. Weseslindtner;
E 311 Fertigungstechnik,
2002.
-
D. Leitner:
"Erkennung eines instabilen Fräsprozesses mithilfe prozessnaher Beschleunigungsmessung";
Supervisor: F. Bleicher, C. Ramsauer;
E 311-01,
2021;
final examination: 2021-05-19.
-
M. Leonhartsberger:
"Verformungsanalyse von Walzprofiliergerüsten - Reproduzierbare Gerüsteinstellung";
Supervisor: F. Bleicher;
E311,
2018;
final examination: 2018-03-21.
-
S. Lichtenberger:
"Plug and Produce Entwicklung eines OPC UA Servers für einen Palettenmanipulator";
Supervisor: B. Kittl;
E311,
2013;
final examination: 2013-02-11.
-
C. Loschan:
"Market-based Investment Decisions into Generation Capacities as Part of the Austrian Electricity Market";
Supervisor: J. Auer;
E370,
2020;
final examination: 2020-09-24.
-
F. Madl:
"Evaluierung von Produktflusssimulationssoftware mit 3D-Visualisierung anhand einer vollautomatischen Transferanlage";
Supervisor: F. Bleicher;
Institut für Fertigungstechnik,
2005.
More information
-
S. Maier:
"Modellhafte Beschreibung eines diskreten Mikroumformprozesses";
Supervisor: F. Bleicher, S. Krall;
E 311-01,
2020;
final examination: 2020-11-19.
-
R. Mair am Tinkhof:
"ERP-Systeme und SAP R/3 in mittelständischen Unternehmen";
Supervisor: B. Kittl;
E311,
2002.
-
D. Maksimovic:
"Stand der Robotertechnik";
Supervisor: K. Wally;
E 311 Fertigungstechnik,
2001.
-
S. Mansour Fallah:
"Auswahl eines geeigneten Schweißverfahrens zur Integration in einen automatisierten Fertigungsprozess";
Supervisor: B. Kittl;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2014;
final examination: 2014-09-18.
-
S Marquez:
"Dual Beam Laser Welding";
Supervisor: G. Liedl;
E345 Institut für spanlose Fertigung und Hochleistungslasertechnik,
2006;
final examination: 2006.
-
J. Mayr:
"Dynamische Untersuchung einer Maschinenstruktur zur Aufnahme eines Drei-Achs-Positioniersystems";
Supervisor: H. Weseslindtner, F. Bleicher;
Institut für Fertigungstechnik,
2000.
More information
-
M. Mayr:
"Laserstrahlschweißen von Stahl und Aluminium mittels eines Nd:YAG Lasers";
Supervisor: G. Liedl;
Umformtechnik und Hochleistungslasertechnik,
2008;
final examination: 2008-05-14.
More information
-
M. Mayr:
"Untersuchung des intermetallischen Phasenwachstums von lasergeschweißten Stahl-Aluminium Verbindungen";
Supervisor: G. Liedl;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2010;
final examination: 2010-03-30.
More information
-
C. Mödlin:
"Untersuchung des Kühlschmierstoffeinflusses auf die Zerspanung von AlSi9Cu3";
Supervisor: H. Weseslindtner, F. Bleicher;
Institut für Fertigungstechnik,
1997.
More information
-
B. Mörzinger:
"Planung, Aufbau und Untersuchung eines Latentwärmespeichers auf Basis von makroverkapselten Polymeren";
Supervisor: H. Walter, C. Zauner, F. Hengsberger;
Institut für Energietechnik und Thermodynamik,
2015;
final examination: 2015-09-02.
-
D. Murtic:
"Modifikation von Materialien mit einer ferritisch-martensitischen Struktur durch Laserbestrahlung";
Supervisor: G. Liedl, G. Humenberger;
Institut für Fertigungstechnik und Photonische Technologien,
2019;
final examination: 2019-12-12.
More information
-
C. Nenning:
"Untersuchungen zum Einsatz von Kühlschmierstoffen beim Bandsägen von Kaltarbeitsstählen";
Supervisor: F. Bleicher, J. Diebold;
E 311-01,
2021;
final examination: 2021-12-07.
-
G. Neubauer:
"Möglichkeiten zur Erhöhung der Produktivität im NC-Maschinenbereich der Firma Bekum, Werk Traismauer";
Supervisor: H. Weseslindtner;
E 311 Fertigungstechnik,
2003.
-
W. Neumayer:
"Analyse des Verschleissverhaltens an Kettensägen";
Supervisor: H. Weseslindtner;
E 311 Fertigungstechnik,
2001.
-
M. Neumüller:
"Entwicklung eines Spannsystems für dreidimensional geformte Bleche";
Supervisor: F. Bleicher, S. Gössinger;
E311,
2019;
final examination: 2019-08-12.
-
M. Nirtl:
"Moderne Transferstrassen - Entwicklungstendenzen sowie Untersuchung und Qualifizierung von Aufstellelementen";
Supervisor: F. Bleicher;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2013.
-
M. Nirtl:
"Moderne Transferstrassen: Entwicklungstendenzen sowie Untersuchung und Qualifizierung von Aufstellelementen";
Supervisor: H. Weseslindtner, F. Bleicher;
Institut für Fertigungstechnik,
2000.
More information
-
M. Nokhbe Zaeim:
"Minimierung der Ausfransung und Delamination bei der Fräsbearbeitung von faserverstärkten Materialien";
Supervisor: F. Bleicher;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2012.
-
M. Novak:
"Entwicklung eines Datenbanksystems zur gezielten Aufbereitung zerspanungsrelevanter Daten";
Supervisor: F. Bleicher, D. Finkeldei;
E311,
2015;
final examination: 2015-11-04.
-
M. Obermair:
"Planung und ERP-gestützte Organisation der Produktion von Multifunktionsscheinwerfern der Firma Ing. H. Gradwohl GesmbH";
Supervisor: B. Kittl;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2011;
final examination: 2011-09-29.
-
R. Oswald:
"Machine Learning: Identifikation von Prozessinstabilitäten beim Fräsen";
Supervisor: F. Bleicher, P. Schörghofer, N. Leder, C. Ramsauer;
E311,
2019;
final examination: 2019-10-18.
-
T. Palatin:
"Messfehler bei der Messung luftgetragener Partikel in Reinen Räumen";
Supervisor: H. Weseslindtner;
Fertigungstechnik,
2004.
-
M. Palle:
"Methodenbasierte Gestaltung der User Experience zum Einsatz einer instrumentierten Werkzeugaufnahme";
Supervisor: F. Bleicher, P. Schörghofer;
E 311-01,
2022;
final examination: 2022-03-23.
-
T. Pauger:
"Diodenbasierte Prozessüberwachung eines Remote-Schneidprozesses basierend auf einer Polarisationsmessung";
Supervisor: G. Liedl, G. Humenberger;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2014;
final examination: 2014-11-24.
-
F. Pauker, C. Kühlmayer:
"Plug & Produce - Aufbau einer automatisierten Fertigungszelle für die Dreh- und Fräsbearbeitung";
Supervisor: B. Kittl;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2012;
final examination: 2012-05-07.
-
G. Payer:
"Optimierung einer parallelkinematischen Struktur";
Supervisor: F. Bleicher;
Institut für Fertigungstechnik,
2004.
More information
-
T. Paytakov:
"Kontrolle und Auswertung der Formgenauigkeit von zylinderförmigen Formelementen";
Supervisor: M.N. Durakbasa;
Fertigungstechnik,
2008;
final examination: 2008-11.
-
H. Peherstorfer:
"Experimentelle Untersuchung des Einflusses von unterschiedlichen Trägerkörperbauformen auf den Hochleistungs-Außenrundschleifprozess";
Supervisor: F. Bleicher;
E 311-01,
2022;
final examination: 2022-05-24.
-
S. Perc:
"Gestaltung von Feinstmesslabors für die Präzisionsmesstechnik";
Supervisor: P.H. Osanna, A. Afjehi-Sadat;
E 311 Institut für Fertigungstechnik,
2003.
-
G. Pérez Gómez:
"Design and Assembly of a Small Scale Solid State Laser System";
Supervisor: G. Liedl;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2009.
-
J. Perwitz:
"Study on Development of the Selective Laser Melting (SLM) Process Parameters for a Novel Specialized Cr-Ni Steel Powder "AMPO M789"";
Supervisor: F. Bleicher, D. Nikolaev;
E 311-01,
2020;
final examination: 2020-10-16.
-
J. Peternel:
"Model of Powder Deposition and Melting of the Melt Pool Surface";
Supervisor: E. Govekar, A. Otto;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2017;
final examination: 2017-09.
-
K. Pfadenhauer:
"Logistik-Strukturprojekt im Werk Niederdollendorf der RHI AG";
Supervisor: B. Kittl;
E311,
2002.
-
L. Pickel:
"Entwicklung eines modularen Baukastensystems für die Konfiguration industrieller Bildverarbeitungssysteme";
Supervisor: B. Kittl, G. Pöchgraber;
E 311-01,
2019;
final examination: 2019-10-23.
-
G. Pöchgraber:
"Modularisierung der Produktstruktur und Implementierung von Sachmerkmalleisten bei einem Sondermaschinenbauer";
Supervisor: B. Kittl, F. Bleicher;
E311,
2018;
final examination: 2018-04-26.
-
L. Pöppel:
"Total Cost of Ownership für den Bandsägeprozess";
Supervisor: F. Bleicher, J. Diebold;
E 311-01,
2021;
final examination: 2021-08-05.
-
R. Pospichal:
"Nanostrukturierung von Metalloberflächen mittels Ultrakurzpulslaser";
Supervisor: G. Liedl;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2018;
final examination: 2018-10-24.
More information
-
R. Prahl:
"Analyse von Führungsfehlern großer Koordinatenmessgeräte und Erstellung eines Korrekturmodells";
Supervisor: F. Bleicher, R. Zisser-Pfeifer;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2012.
-
M. Prießnitz:
"In-situ Überwachung eines selektiven Laserschmelz-Prozesses";
Supervisor: F. Bleicher, S. Krall;
E 311-01,
2020;
final examination: 2020-11-18.
-
S. Pumberger:
"Untersuchung der Fertigungsmethoden von Trapezblechen in Grossfilteranlagen";
Supervisor: B. Kittl;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2015;
final examination: 2015-08-07.
-
S. Purns:
"Optimierung der Bearbeitung von Refraktärmetallen auf Stanzpressen";
Supervisor: H. Weseslindtner;
E 311 Fertigungstechnik,
2001.
-
F. Puschitz:
"Ermittlung des Verschleissverhaltens an Kettensägen ";
Supervisor: H. Weseslindtner;
E 311 Fertigungstechnik,
2001.
-
F. Puschitz:
"Verschleißverhalten von Kettensägen: Untersuchung am Beispiel der Kappsäge PRINZ 120 und der Sägekette SK 15";
Supervisor: H. Weseslindtner, F. Bleicher;
Institut für Fertigungstechnik,
2001.
More information
-
P. Radey:
"Entwicklung einer Entscheidungsmethodik zur Fertigungsautomatisierung";
Supervisor: F. Bleicher, D. Berger;
Fertigungstechnik und Hochleistungslasertechnik,
2011;
final examination: 2011-12-19.
-
C. Ramsauer:
"Parameteranalyse zur Steuerung komplexer Fräsprozesse";
Supervisor: F. Bleicher, P. Schörghofer, N. Leder, Ch. Habersohn;
E311,
2019;
final examination: 2019-05-23.
-
A. Raschendorfer:
"Potentiale von Machine Hammer Peening im Werkzeug- und Formenbau";
Supervisor: F. Bleicher, M. Obermair;
E311,
2017;
final examination: 2017-05-24.
-
S. Rath:
"Optische Überwachung des Laserstrahlfügens von Kunststoffen mit Metallen";
Supervisor: G. Liedl, G. Humenberger;
Institut für Fertigungstechnik und Photonische Technologien,
2019;
final examination: 2019-05-22.
More information
-
R. Rattay:
"Theoretische und empirische Untersuchung der Schweißbarkeit von Polyurethanseilen";
Supervisor: H. Weseslindtner, F. Bleicher;
Institut für Fertigungstechnik,
2000.
More information
-
M. Reiter:
"Verschleißminimierung an Wendeschneidplatten durch thermische und mechanische Funktionalisierung des Schneidkeils";
Supervisor: F. Bleicher, A. Siller;
E311,
2016;
final examination: 2016-10-25.
-
F. Reuter:
"Auswahlverfahren zur Bewertung von CAQ-Systemen";
Supervisor: B. Kittl;
E311,
2001.
-
M. Rieger:
"Wirtschaftlichkeitsbetrachtung zur Einführung eines Toolmanagementsystems";
Supervisor: B. Kittl;
E311,
2001.
-
G. Rodlauer:
"Evaluierung von Aufstellelementen über die Modalanalyse";
Supervisor: H. Weseslindtner, F. Bleicher;
Institut für Fertigungstechnik,
2000.
More information
-
A Rozsnyai:
"Laser hardening of deep drawing tools for industrial usage";
Supervisor: G. Liedl;
Institut für Fertigungstechnik und Hochleistungslasertechnik),
2018;
final examination: 2018-12-12.
More information
-
B. Saadat:
"Genauigkeit und Präzision in der Koordinatenmesstechnik";
Supervisor: M.N. Durakbasa;
Fertigungstechnik,
2007;
final examination: 2007.
-
J. Sacherl:
"Evaluierung bearbeitungsinduzierter Schadensbilder beim Zerspanen von Faser-Kunststoff-Verbunden mit geometrisch bestimmter Schneide";
Supervisor: F. Bleicher, R. Zemann;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2015;
final examination: 2015-11-03.
-
A Saliger:
"Laserstrahlschweißen von Titan und Aluminium unter Anwendung eines Nd:YAG Festkörperlasers";
Supervisor: G. Liedl;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2010;
final examination: 2010-11-24.
-
M. Satala:
"Analyse der Datenerfassung und -speicherung an einer Extrusionslinie";
Supervisor: F. Bleicher;
E 311-01,
2021;
final examination: 2021-11-17.
-
S. Schebesta:
"Einfluss ausgewählter Druckparameter auf Form und Stabilität beim FDM-Verfahren";
Supervisor: F. Bleicher;
E311,
2017;
final examination: 2017-06-26.
-
R. Schmalhofer:
"Development of a short-time-implementation tool for FMC";
Supervisor: B. Kittl;
Institut für Fertigungstechnik,
2008;
final examination: 2008-06-25.
-
C. Schneider:
"Modellvalidierung und Parametrisierung eines skriptbasierten Finite Elemente Modells eines Walzprofiliergerüstes";
Supervisor: F. Bleicher, M. Lamprecht, M. Leonhartsberger;
E 311-01,
2021;
final examination: 2021-01-27.
-
J. Schober:
"Analyse der optimalen Verarbeitungsparameter bei der spritzgusstechnischen Verarbeitung des biologisch abbaubaren Werkstoff FASAL";
Supervisor: H. Weseslindtner, F. Bleicher;
Institut für Fertigungstechnik,
1997.
More information
-
E. Schriever:
"Setup of a diode laser system including robot calibration and integration into the safety system";
Supervisor: G. Liedl, G. Humenberger;
Institut für Fertigungstechnik und Photonische Technologien,
2019;
final examination: 2019-01-30.
More information
-
K Schulmeister:
"Modellierung eines Teststandes für Laserunterstütztes Drahtziehen";
Supervisor: M. Kozek, G. Liedl;
E325/E345,
2006;
final examination: 2006-11-22.
-
C. Schwaiger:
"Standwegversuche mit Hartmetall-Zerspanungswerkzeugen an CFK";
Supervisor: F. Bleicher, R. Zemann;
E311,
2016;
final examination: 2016-12-15.
-
M. Sexauer:
"Life cycle assessment of rail vehicle production based on manufacturing at the Siemens Mobility facility: Vienna Leberstraße";
Supervisor: F. Bleicher, M. Hacksteiner;
E311,
2019;
final examination: 2019-11-05.
-
T. Siedler:
"Konzeption und Evaluierung der Vernetzung von industriellen Anlagen im IIoT";
Supervisor: B. Kittl, F. Pauker;
E311,
2018;
final examination: 2018-10-05.
-
E. Silveira:
"Green compact laser sintering of hardmetals and cermets";
Supervisor: G. Liedl;
Institut für spanlose Fertigung und Hochleistungslasertechnik,
2003.
-
F. Singer:
"Produktionsauslegung für die effiziente Fertigung feuerfester Schaumkeramik";
Supervisor: B. Kittl, C. Mahr;
E 311-01,
2019;
final examination: 2019-02-28.
-
R. Spietschka:
"Präventive Instandhaltung von vollautomatischen Schraubstationen";
Supervisor: H. Weseslindtner, F. Bleicher;
Institut für Fertigungstechnik,
2000.
More information
-
T. Sprenger:
"Marktanalyse zu Zerspanungswerkzeugen für die Bearbeitung von Faser-Kunststoff-Verbunden";
Supervisor: F. Bleicher, R. Zemann;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2015;
final examination: 2015-02-11.
-
A. Steininger:
"Analyse der Energieeffizienz in der spanenden Fertigung von prismatischen Bauteilen";
Supervisor: F. Bleicher;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2011.
-
M. Straßl:
"Wärmebehandlung feinmechanischer Bauteile mit dem Laser";
Supervisor: G. Liedl;
E345 Institut für spanlose Fertigung und Hochleistungslasertechnik,
2000.
-
F. Sturm:
"Ecoklav - der ökonomische Autoklav";
Supervisor: F. Bleicher, R. Zemann;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2014.
-
M. Supp:
"Studie zum Einsatz von "Smart Tools" in der industriellen Anwendung";
Supervisor: F. Bleicher;
E 311-01,
2020;
final examination: 2020-10-08.
-
M. Tendl:
"Düsenkonzepte für den Blown Powder-Prozess ";
Supervisor: G. Liedl;
E345,
2002.
More information
-
A. Theiner:
"Schwachstellenanalyse der Kalibriereinheit QCM.; Entwurf bzw. Weiterentwicklung einer Mess- und Kalibriereinrichtung für Parallelkinematikwerkzeugmaschinen.";
Supervisor: H. Weseslindtner, F. Bleicher;
Institut für Fertigungstechnik,
2005.
More information
-
M. Trappl:
"Entwicklung eines modularen Werkzeugmaschinenkonzeptes mit höchster Genauigkeit für die Feinverarbeitung";
Supervisor: F. Bleicher;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2013;
final examination: 2013-07-15.
-
C. Vlaschitz:
"Wirtschaftlichkeitsbetrachtung zum Standzeitverhalten von Werkzeugen";
Supervisor: H. Weseslindtner;
Fertigungstechnik,
2003.
-
G. Vogel:
"Entwicklung eines Konzeptes für eine aktive Montageplatte";
Supervisor: H. Weseslindtner, F. Bleicher;
Institut für Fertigungstechnik,
1997.
More information
-
W. Votruba:
"Optimierung von Technologieparametern im NC-Code anhand von Daten eines sensorischen Werkzeughalters und der CNC-Fräsmaschine";
Supervisor: F. Bleicher, G. Mauthner;
E 311-01,
2021;
final examination: 2021-11-17.
-
D. Wachholbinger:
"Modellierung der Positionsregelung von Werkzeugmaschinen";
Supervisor: F. Bleicher;
E 311-01,
2020;
final examination: 2020-07-03.
-
C. Wang:
"Studies for the determination of the process dynamics with Finite Element Method on a BTA deep hole drilling machine";
Supervisor: F. Bleicher;
E311,
2016;
final examination: 2016-10-25.
-
L. Weber:
"Experimentelle Ermittlung der Einflussfaktoren auf das dynamische Verhalten von Sägebändern";
Supervisor: F. Bleicher, G. Wiesinger;
E 311-01,
2021;
final examination: 2021-12-02.
-
M. Weger:
"Fertigungsplanung und Fertigungssteuerung bei ENGEL Austria - Unternehmens-EDV und Leitsysteme";
Supervisor: B. Kittl;
Institut für Fertigungstechnik,
2008;
final examination: 2008-06-25.
-
T. Weiler:
"Losgrößenoptimierung in der mechanischen Bauteilfertigung";
Supervisor: B. Kittl;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2015;
final examination: 2015-10-05.
-
M. Wiesauer:
"Erstellen eines mechatronischen Modells einer Werkzeugmaschine unter Einbezug von Reibungsmechanismen in der Mehrkörpersimulationssoftware RecurDyn®";
Supervisor: F. Bleicher;
E311,
2018;
final examination: 2018-03-09.
-
L. Wieser:
"Wissensbasierter Ansatz für Design u.Fertigung von Pressformen zur Herstellung von Schuhsohlen";
Supervisor: B. Kittl;
Fertigungstechnik,
2004.
-
G. Wiesinger:
"Bestimmung von Materialkennwerten innovativer Naturfaserverbundplatten";
Supervisor: F. Bleicher;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2012.
-
O. Wurdak:
"Entwicklung von Software-Tools zur automatischen Kalibrierung einer Parallelkinematik";
Supervisor: H. Weseslindtner, F. Bleicher;
Institut für Fertigungstechnik,
2003.
More information
-
W. Xander:
"Einbindung eines Industrieroboters als Schnittstelle zwischen Hochregallager und Transportfahrzeug zur Kommissionierung von Montageplatten";
Supervisor: H. Weseslindtner, F. Bleicher;
Institut für Fertigungstechnik,
1997.
More information
-
H. Yavuz:
"Untersuchung der Innenkühlung von Diamantwerkzeugen für die Zerspanung von Eisenbasis-Werkstoffen";
Supervisor: F. Bleicher, M. Reiter;
E311,
2019;
final examination: 2019-04-25.
-
G. Zehethofer:
"Implementierung einer Naßstrahlanlage ";
Supervisor: H. Weseslindtner;
E 311 Fertigungstechnik,
2001.
-
L. Zelinka:
"Strukturoptimierung eines Wendeplattenbohrer - Grundkörpers unter Anwendung des additiven selektiven Laserschmelz -Verfahrens";
Supervisor: F. Bleicher, A. Steininger;
E311,
2019;
final examination: 2019-06-12.
-
O. Zhuravlov:
"Aufbau und Tests eines spektroskopischen Messsystems bei der Lasermaterialbearbeitung";
Supervisor: G. Liedl, G. Humenberger;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2017;
final examination: 2017-01-25.
More information
-
M. Zillner:
"Einfluss des ECAP-Prozesses auf die Zerspanbarkeit von reinem Kupfer und Titan";
Supervisor: F. Bleicher, R. Zemann;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2015.
-
P. Zwirner:
"Analyse der Varianten des Fertigungsablaufes einer Montagelinie mittels Simulation mit Arena";
Supervisor: H. Weseslindtner;
E 311 Fertigungstechnik,
2002.
Scientific Reports
-
J. Aichinger, F. Bammer, B. Holzinger, G. Humenberger, T. Schumi, D. Schuöcker:
"Laserunterstütztes Biegen";
2008;
16 pages.
More information
-
F. Akhavei, F. Bleicher:
"Analysebericht - Lean Factory 07";
Report for KRESTA industries GmbH;
2014;
42 pages.
-
F. Akhavei, F. Bleicher:
"Handbuch - Lean Factory 07";
Report for KRESTA industries GmbH;
2015;
23 pages.
-
F. Akhavei, F. Bleicher:
"Projektendbericht - Lean Factory 07";
Report for KRESTA industries GmbH;
2016;
89 pages.
-
F. Bammer:
"A new type of diode laser with superior beam quality";
Report for Austria Wirtschaftsservice & Innovation Relay Centre Austria;
2004.
More information
-
F. Bammer:
"Analyse von LiNbO3 und Al2O3 als photoelastische Modulatoren für 20 MHz Pulse-Picking";
Report for High Q Laser Production GmbH;
2005;
11 pages.
-
F. Bammer:
"Bericht zum Projekt "Pulse-Picking"";
Report for High Q Laser Production GmbH;
2007;
13 pages.
More information
-
F. Bammer:
"Endbericht zu FWF-Projekt "Pulsed High Power Diode Lasers"";
Report for FWF;
Report No. 4,
2006;
5 pages.
-
F. Bammer:
"Experimentelle Analyse eines LiNbO3-Kristalls als photoelastischer Modulator";
Report for High Q Laser;
Report No. 1,
2006;
5 pages.
-
F. Bammer:
"Grundlegendes zum laserunterstütztes Innenhochdruckumformen";
Report for ElbForm;
2005;
6 pages.
-
F. Bammer:
"Güteschalten mittels eines Torsionsspiegels";
Report for High-Q-Laser;
Report No. 3,
2006;
6 pages.
-
F. Bammer:
"Jahresbericht für FWF-Projekt "Pulsed High Power Diode Lasers";
Report for FWF;
2005;
1 pages.
-
F. Bammer:
"Jahresbericht für FWF-Projekt "Pulsed High Power Diode Lasers"";
Report for FWF;
2004.
-
F. Bammer:
"LASER 2005 World of Photonics";
Report for ARGELAS;
2005;
7 pages.
-
F. Bammer:
"Projekt "Serienreifer Prototyp LUGB mit Diodenlaser"";
Report for Trumpf Maschinen Austria;
2005;
4 pages.
-
F. Bammer:
"Technologieoffert für Diodenlaser";
Report for AWS;
Report No. 1,
2006;
1 pages.
-
F. Bammer, B. Holzinger:
"Zwischenbericht zu "LUGB"";
Report for Trumpf Maschinen Austria;
2005;
6 pages.
-
F. Bammer, B. Holzinger:
"Zwischenbericht zum Bau eines Strahlteiler für Nd:YAG-Laser";
Report for Trumpf Maschinen Austria;
2005;
5 pages.
-
F. Bammer, B. Holzinger, T. Schumi:
"Zeitmultiplexing von Hochleistungslaserdioden";
Report for LIMO Lissotschenko Mikrooptik;
2005;
19 pages.
-
F. Bammer, B. Holzinger, D. Schuöcker:
"Zwischenbericht im Forschungsbereich "Laserunterstützes Umformen"";
Report for Fa. Trumpf Maschinen Austria;
2004.
-
F. Bammer, A. Kratky, G. Liedl, D. Schuöcker:
"Bericht zur Subvention für das Jahr 2007 "KOMPETENZ FASERLASER"";
Report for BMVIT;
2008;
13 pages.
More information
-
F. Bammer, D. Schuöcker:
"Bericht zum Projekt "Kohärente Kopplung von Diodenlasern"";
Report for Bundesministrium für Verkehr, Wissenschaft und Innovationen;
2002.
-
F. Bammer, D. Schuöcker:
"Bericht zur Subvention für das Jahr 2003 "Entwicklung neuartiger Pulsdiodenlaser"";
Report for Bundesministerium für Verkehr, Innovationen und Technologie;
2004.
-
D. Berger, F. Bleicher, I. Ereke, P. Radey:
"Abschlusspräsentation Forschungsgemeinschaft Straßenbahn SP2";
Report for Forschungsgemeinschaft Straßenbahn SP2;
2011.
-
D. Berger, G. Geiger, F. Bleicher:
"Erstbemusterung CMT-Löten für Einsatz im Schienenfahrzeugbau";
Report for Bericht für Forschungsgemeinschaft Straßenbahn SP2;
2009;
14 pages.
-
D. Berger, G. Geiger, F. Bleicher:
"Erstbemusterung Plasmapunktschweißen für Einsatz im Schienenfahrzeugbau";
Report for Bericht für Forschungsgemeinschaft Straßenbahn SP2;
2009;
14 pages.
-
D. Berger, G. Geiger, F. Bleicher:
"Jahresabschlussbericht 2009 Forschungsgemeinschaft Straßenbahn SP2";
Report for Bericht für Forschungsgemeinschaft Straßenbahn SP2;
2009;
76 pages.
-
D. Berger, G. Geiger, F. Bleicher, S. Mieth:
"Prüfspezifikation MIG-Löten für Einsatz im Schienenfahrzeugbau";
Report for Bericht für Forschungsgemeinschaft Straßenbahn SP2;
2009;
48 pages.
-
D. Berger, G. Geiger, I. Ereke, F. Bleicher:
"Bericht MIG-Löten dynamische Zugversuche im Zeitfestigkeitsbereich";
Report for Bericht für Forschungsgemeinschaft Straßenbahn SP2;
2009;
39 pages.
-
D. Berger, G. Geiger, I. Ereke, F. Bleicher:
"Bericht Plasmapunktschweißen statische Zugversuche";
Report for Bericht für Forschungsgemeinschaft Straßenbahn SP2;
2009;
18 pages.
-
D. Berger, G. Geiger, I. Ereke, F. Bleicher:
"Projektabschlussbericht 2008-2011";
Report for Forschungsgemeinschaft Straßenbahn SP2;
2011;
200 pages.
-
D. Berger, G. Wiesinger, F. Bleicher:
"Jahresbericht 2011 NFVP-Trans";
Report for FFG Programmlinie Coin Projekt NFVp-Trans;
2011;
28 pages.
-
D. Berger, G. Wiesinger, F. Steiner, F. Bleicher:
"Jahrespräsentation Projekt NFVP-Trans";
Report for Institut f. Fertigungstechnik und Hochleistungslasertechnik;
2011;
45 pages.
-
J. Bernreiter:
"Inversbearbeitungsmaschine FEM Simulation";
2013;
46 pages.
-
J. Bernreiter:
"Schabotte eines Lufthammers";
Report for Schöller Bleckmann Oilfield Technology;
2009;
24 pages.
-
J. Bernreiter, D. Berger:
"Konzepte Wärmerückgewinnung bei der VATub in Kindberg";
Report for voest alpine Tubulars;
2009;
14 pages.
-
J. Bernreiter, D. Berger:
"Wärmerückgewinnung am Drahtbund";
Report for voestalpine Austria Draht;
Report No. 1,
2008;
9 pages.
More information
-
J. Bernreiter, D. Berger:
"Wertanalyse M10";
Report for Schöller Bleckmann Oilfield Technology;
Report No. 1,
2006;
14 pages.
More information
-
J. Bernreiter, D. Berger:
"Wertstromanalyse und Messstrategie";
Report for Wild GmbH;
Report No. 1,
2009;
40 pages.
-
J. Bernreiter, D. Berger, C. Dorn, G. Geiger, B. Dellinger:
"Wärmerückgewinnung an der Hakenbahn und am Kühlbett";
2009;
9 pages.
-
J. Bernreiter, F. Bleicher:
"Zwischenbericht zu Ultrasonic Assisted Grinding";
Report for CORNET project committee - Kunststoffcluser Niederösterreich;
2008;
15 pages.
More information
-
J. Bernreiter, F. Bleicher, C. Dorn:
"Einlippentieflochbohren in Formenbaustählen";
Report for Böhler Edelstahl;
2008;
32 pages.
More information
-
J. Bernreiter, C. Einspieler:
"Einfluss des Schneidöles beim Einlippentieflochbohren";
Report for Motorex;
2008;
11 pages.
More information
-
J. Bernreiter, C. Einspieler:
"Messbericht Schrägverzahnungsbearbeitung von Getriebewellen";
Report for GM Powertrain - Opel Asparn;
Report No. 1,
2007;
8 pages.
More information
-
R. Bielak:
"Modulation and Simulation of Effects during Laser Material Processing - Proposal of Simplified 2D Simulation Models";
Report for OOeLZ;
2010;
59 pages.
-
R. Bielak, A. Kratky:
"ELB A3 2. Quartalsbericht "Innenhochdruckumformung von aushärtbaren Aluminium- und Magnesiumlegierungen bei hohen Temperaturen (Warmumformung)"";
Report for ELB Form;
Report No. 2,
2007;
19 pages.
More information
-
R. Bielak, G. Liedl:
"Modulation and Simulation of Effects during Laser Material Processing - Proposal of Simplified 2D and 3D Simulation Models";
Report for OOeLZ;
2011;
70 pages.
-
F. Bleicher:
"Basic tests: Effect of cutting insert topology (face angle)";
Report for EU-CORNET Consortium;
2007;
40 pages.
More information
-
F. Bleicher:
"Bohrungsfeinstbearbeitung";
Report for Forschungsförderungsfond der gewerblichen Wirtschaft;
Report No. 806184 / M,
2004;
35 pages.
More information
-
F. Bleicher:
"Entwicklung der Verbindungstechnik zur Herstellung von Industriesieben für die Aufbereitungsindustrie";
Report for Forschungsförderungsfond der Gewerblichen Wirtschaft;
1999;
28 pages.
More information
-
F. Bleicher:
"Entwicklung von Luftlagersystemen";
Report for Fa. Swarovski;
2007;
36 pages.
More information
-
F. Bleicher:
"Gutachten zu Bearbeitungszentrum Hedelius RS 100 KL/50";
Report for Bezirksgericht St. Pölten;
2007;
20 pages.
More information
-
F. Bleicher:
"Optimierung eines Bondingprozesses";
Report for Fa. Hairdreams;
2005;
21 pages.
More information
-
F. Bleicher:
"Optimierung von HSC-Spindel-Dichtsystemen";
Report for Forschungsförderungsfond der gewerblichen Wirtschaft;
Report No. 802995 / 6611 K/Sa,
2001;
72 pages.
More information
-
F. Bleicher:
"Pflichtenheft für die Enwicklung einer Luftlagerung";
Report for Fa. Swarovski;
2008;
3 pages.
More information
-
F. Bleicher:
"Privatgutachten zur Offenlegungsschrift DE 40 33 541 A1";
Report for Patentanwalt Dr. Polte;
2005;
13 pages.
More information
-
F. Bleicher:
"Prüfung von Innengewinden";
Report for Fa. Neumann;
2008;
11 pages.
More information
-
F. Bleicher:
"Stabkinematik";
Report for Forschungsförderungsfond der Gewerblichen Wirtschaft;
2000;
74 pages.
More information
-
F. Bleicher:
"Stabkinematik - Bewegungsgleichungen";
Report for Krauseco Werkzeugmaschinen GmbH;
1998;
19 pages.
More information
-
F. Bleicher:
"Strömungssimulation Inversbearbeitungsmaschine";
Report for Daimler-Chrysler AG, Stuttgart;
2007;
23 pages.
More information
-
F. Bleicher, D. Berger:
"Temperaturmessverfahren und Manipulation der Temperaturverteilung - Strömungsvisualisierung";
Report for AHT Cooling Systems GmbH;
Report No. 1,
2007;
8 pages.
-
F. Bleicher, D. Berger:
"Temperaturmessverfahren und Manipulation der Temperaturverteilung - Testauswertung";
Report for AHT Cooling Systems GmbH;
Report No. 1,
2008;
20 pages.
-
F. Bleicher, D. Berger:
"TRIZ-Methode: Theorie zur Lösung erfinderischer Probleme";
Report for CIRCE Quicknet;
2006;
14 pages.
More information
-
F. Bleicher, J. Bernreiter:
"Development of test equipment";
Report for EU-CORNET Ultrasonic Assisted Grinding;
2008;
8 pages.
More information
-
F. Bleicher, J. Bernreiter:
"FEM-Simulation Inversbearbeitungsmaschine";
Report for Daimler-Chrysler AG, Stuttgart;
2007;
29 pages.
More information
-
F. Bleicher, J. Bernreiter:
"Fundamentauslegung für CMM LS";
Report for Schöller Bleckmann Oilfield Technology;
Report No. 1,
2005;
31 pages.
More information
-
F. Bleicher, J. Bernreiter:
"Genauigkeit von Lasertracker-Systemen";
Report for Schöller Bleckmann Oilfield Technology;
Report No. 1,
2004;
38 pages.
More information
-
F. Bleicher, J. Bernreiter:
"Gun Drilling";
Report for Forschungsförderungsfond der gewerblichen Wirtschaft;
2002;
68 pages.
More information
-
F. Bleicher, J. Bernreiter:
"Konzept für ein Innengeometrie Messsystem";
Report for Schöller Bleckmann Oilfield Technology;
Report No. 1,
2005;
22 pages.
More information
-
F. Bleicher, J. Bernreiter:
"Messen der US-Schwingungen";
Report for National consortium EU-CORNET Ultrasonic Assisted Grinding;
2008;
44 pages.
More information
-
F. Bleicher, J. Bernreiter:
"Schnittversuche mit VHM-Schaftfräser";
Report for Fa. Scheinecker;
2008;
11 pages.
More information
-
F. Bleicher, J. Bernreiter:
"Simulation of Cutting process";
Report for EU-CORNET High Performance Manufacturing;
2007;
10 pages.
More information
-
F. Bleicher, J. Bernreiter:
"Simulation zur Lagerung von Schwerstangen";
Report for Schöller Bleckmann Oilfield Technology;
Report No. 1,
2004;
29 pages.
More information
-
F. Bleicher, J. Bernreiter:
"Ultrasonic Assisted Grinding - Aktuelle Entwicklungen";
Report for Bericht für EU-CORNET Ultrasonic Assisted Grinding;
2008;
18 pages.
-
F. Bleicher, J. Bernreiter:
"Ultrasonic Assisted Grinding - Metrology of US-Vibration";
Report for EU-CORNET Ultrasonic Assisted Grinding;
2008;
14 pages.
More information
-
F. Bleicher, J. Bernreiter:
"Ultrasonic Assisted Grinding - Simulation of US-Vibration";
Report for EU-CORNET Ultrasonic Assisted Grinding;
2008;
21 pages.
More information
-
F. Bleicher, J. Bernreiter, C. Einspieler:
"Applikation zur Volumenbestimmung von E1-Gewichtsstücken";
Report for Sartorius AG;
Report No. 1,
2006;
22 pages.
More information
-
F. Bleicher, J. Bernreiter, C. Einspieler:
"Bericht zu laufenden Projekten";
Report for Schöller Bleckmann Oilfield Technology;
2009;
28 pages.
More information
-
F. Bleicher, J. Bernreiter, C. Einspieler:
"Deep hole drilling";
Report for EU-CORNET High Performance Manufacturing;
2007;
9 pages.
More information
-
F. Bleicher, J. Bernreiter, C. Einspieler, C. Dorn:
"Einsatz eines Servoventils beim gesteuerten Einlippentieflochbohren";
Report for Bosch Rexroth Group;
Report No. 1,
2008;
8 pages.
-
F. Bleicher, J. Bernreiter, C. Einspieler, Ch. Habersohn:
"Konzepte zum gesteuerten BTA-Bohren";
Report for Schöller Bleckmann Oilfield Technology;
2009;
51 pages.
-
F. Bleicher, J. Bernreiter, T. Gröger:
"UAG - FFG Endbericht";
Report for FFG;
2010;
36 pages.
-
F. Bleicher, J. Bernreiter, T. Gröger et al.:
"Cornet UAG - Final Technical Report";
Report for Bericht für EU-Cornet;
2010;
75 pages.
-
F. Bleicher, J. Bernreiter, T. Gröger, M. Heger, H. Hulak et al.:
"Ultrasonic Assisted Grinding -UAG - UC-Projektendbericht";
Report for National consortium EU-CORNET Ultrasonic Assisted Grinding;
2010;
50 pages.
-
F. Bleicher, J. Bernreiter, M. Heger, H. Hulak:
"PKD-Fräsen - Analyse der Spanbildung";
Report for Walter AG, Tübingen;
2009;
29 pages.
More information
-
F. Bleicher, J. Bernreiter, F. Puschitz, C. Dorn:
"Determination of Cutting Forces";
Report for EU-CORNET High Performance Manufacturing;
2008;
22 pages.
More information
-
F. Bleicher, C. Dorn:
"Increase in efficiency of value added chain of production of a levelling valve";
Report for CORNET High Performance Manufacturing;
2008;
19 pages.
More information
-
F. Bleicher, C. Dorn:
"Spanende Bearbeitung von G1.4848";
Report for CORNET High Performance Manufacturing;
2007;
6 pages.
More information
-
F. Bleicher, C. Dorn:
"Trockenbearbeitung";
Report for +GF+ Georg Fischer;
Report No. 1,
2008;
6 pages.
-
F. Bleicher, C. Dorn, G. Bohaty:
"Entgraten von Federbeinen - Entwicklung von Entgratwerkzeugen";
Report for +GF+ Georg Fischer;
Report No. 1,
2008;
7 pages.
-
F. Bleicher, C. Dorn, Ch. Habersohn:
"Langlochfräsen in großer Tiefe";
Report for ACTech;
2009;
33 pages.
More information
-
F. Bleicher, C. Dorn, F. Puschitz:
"Endbericht zu HPM - High Performance Cutting";
Report for Bericht für FFG/ACVR;
Report No. 2,
2008;
18 pages.
-
F. Bleicher, C. Dorn, F. Puschitz:
"Zwischenbericht zu HPM - High Performance Cutting";
Report for Bericht für FFG/ACVR;
Report No. 1,
2008;
12 pages.
-
F. Bleicher, C. Einspieler:
"Messbericht zu Fill Robmill 6400 V2";
Report for Fa. Fill;
2008;
6 pages.
More information
-
F. Bleicher, C. Einspieler:
"Messbericht zu Heid Zentralspindeldrehzentrum CT9";
Report for Fa. Heid;
2008;
11 pages.
More information
-
F. Bleicher, C. Einspieler:
"Messbericht zu Nomotec Bearbeitungsmaschine";
Report for Fa. Nomotec;
2008;
3 pages.
More information
-
F. Bleicher, C. Einspieler:
"Messbericht zu Robomill-Bearbeitungsmaschine";
Report for Fa. Fill;
2007;
10 pages.
More information
-
F. Bleicher et al.:
"Manufuture-JTI - Beurteilung der nationalen Bedeutung einer möglichen Joint Technology Initiative (JTI) im Bereich Produktionstechnologien";
Report for Bundesministerium für Verkehr, Innovation und Technologie;
2008;
32 pages.
More information
-
F. Bleicher, M. Fuchs, T. Mikats:
"WFL - Vibrationsdrehen - Fortschrittsbericht";
2012;
29 pages.
-
F. Bleicher, P. Furtner:
"Clean room in ESO Headquarters Building";
Report for European Organisation for Astronomical Research in the Southern Hemisphere;
2008;
10 pages.
More information
-
F. Bleicher, G. Geiger:
"Analyse der Ventilsitzbearbeitung des Audi V6 3,2l Motors";
Report for Fa. Nemak Slovakia;
2007;
16 pages.
More information
-
F. Bleicher, G. Geiger, D. Berger:
"Flecitiy New Generation - Technologieansätze";
Report for Center of Excellence FOGE STRABE FP2;
2008;
8 pages.
More information
-
F. Bleicher, G. Geiger, D. Berger:
"Testprogramm für MIG-LÖT Verbindungen";
Report for Forschungsgemeinschaft Straßenbahn;
Report No. 1,
2008;
26 pages.
-
F. Bleicher, G. Geiger, Ch. Habersohn:
"Messungen an SEMA Abwälzfräsmaschine";
Report for Sema Maschinenbau GmbH;
Report No. 1,
2010;
26 pages.
-
F. Bleicher, H. Grünberger:
"Steifigkeitsuntersuchungen von CFK-Stäben mit Stahlflansch";
Report for Krauseco Werkzeugmaschinen GmbH;
2000;
15 pages.
More information
-
F. Bleicher, Ch. Habersohn:
"Einspannkraftmessgerät für Spezialspannsatz";
Report for Swarovski;
2009;
10 pages.
-
F. Bleicher, Ch. Habersohn:
"Entwicklung einer Spindel mittels Luftlagerung zum Hochgeschwindigkeitsschleifen";
Report for New Way;
Report No. 1,
2008;
35 pages.
-
F. Bleicher, Ch. Habersohn:
"Entwicklung eines Luftlagersystems";
Report for Swarovski;
2009;
53 pages.
-
F. Bleicher, Ch. Habersohn:
"Entwicklung eines Werkzeugspannsatzes für die Hochgeschwindigkeitsbearbeitung";
Report for Fa. Swarovski;
2008;
35 pages.
More information
-
F. Bleicher, Ch. Habersohn:
"Epoxidharz-Gussversuche";
Report for Fa. Swarovski;
2008.
More information
-
F. Bleicher, Ch. Habersohn:
"Folienschweißen, Ermittlung optimaler Parameter (Endbericht)";
Report for Constantia Teich;
2009;
70 pages.
-
F. Bleicher, Ch. Habersohn:
"Folienschweißen, Ermittlung optimaler Parameter (Erstinformation)";
Report for Constantia Teich;
2009;
25 pages.
-
F. Bleicher, Ch. Habersohn:
"Folienschweißen, Ermittlung optimaler Parameter (Projektzusammenfassung)";
Report for Constantia Teich;
2009;
4 pages.
-
F. Bleicher, Ch. Habersohn:
"Folienschweißen, Ermittlung optimaler Parameter (Zwischenbericht)";
Report for Constantia Teich;
2009;
54 pages.
-
F. Bleicher, Ch. Habersohn:
"Folienschweißungen";
Report for Teich Constantia;
2009;
46 pages.
-
F. Bleicher, Ch. Habersohn:
"Folienschweißungen";
Report for Teich Constantia;
2009;
46 pages.
-
F. Bleicher, Ch. Habersohn:
"Oberflächenuntersuchung: Vergleich: Prägen und Texturwalzen";
Report for Constantia Teich GmbH;
2010;
32 pages.
-
F. Bleicher, Ch. Habersohn:
"Schwachstellenanalyse Ultraschallschweißprozess (Endbericht)";
Report for Constantia Teich;
2009;
46 pages.
-
F. Bleicher, Ch. Habersohn:
"Schwachstellenanalyse Ultraschallschweißprozess (Projektzusammenfassung)";
Report for Constantia Teich;
2009;
5 pages.
-
F. Bleicher, Ch. Habersohn:
"Schwachstellenanalyse Ultraschallschweißprozess (Zwischenbericht)";
Report for Constantia Teich;
2009;
30 pages.
-
F. Bleicher, Ch. Habersohn:
"Sonderspannsatz Schleifspindel, Auslegung technische Daten";
Report for Swarovski;
2009;
27 pages.
-
F. Bleicher, Ch. Habersohn:
"Vermessung Musterteil Valve Cap";
Report for Maini;
2009;
18 pages.
-
F. Bleicher, C. Janner, T. Mader:
"Endbericht zu Maschinenvermessung der Versuchsstation Quickstep";
Report for Krauseco Werkzeugmaschinen GmbH;
1999;
77 pages.
More information
-
F. Bleicher, C. Lechner, Ch. Habersohn, S. Gössinger, C. Bauer, E. Kozeschnik, B. Adjassoho, M. Rodríguez Ripoll, F. Heindl, M. Jech:
"Tribological effects of structured and densified surfaces";
Report for MFP3.6 Densified Surfaces;
Report No. 1,
2013;
64 pages.
-
F. Bleicher, F. Pfefferkorn, T. Schmitz, S. Krall, C. Baumann:
"Zwischenbericht FFG Projekt OMAHA-Project (ACAMS)";
Report for FFG;
Report No. 1,
2020;
20 pages.
-
F. Bleicher, F. Pfefferkorn, T. Schmitz, S. Krall, C. Baumann, C. Ramsauer, D. Leitner:
"Zwischenbericht FFG Projekt OMAHA-Project (ACAMS)";
Report for FFG;
Report No. 2,
2021;
23 pages.
-
F. Bleicher, F. Puschitz, Ch. Habersohn:
"Fertigungsmaschine für Harfensiebe aus Polyurethanummantelten-Drähten";
Report for H&S Industriesiebe GmbH;
Report No. 1,
2010;
37 pages.
-
F. Bleicher, F. Steiner:
"Endbericht - CC: Forschungs- und Entwicklungsvertrag und Angebot für eine Machbarkeitsstudie zur Produkt- und Fertigungsentwicklung einer Schutz- und Stützkonstruktion im Zuge einer FFG-Förderung";
Report for Mag. R. Stonawski;
2012;
16 pages.
-
F. Bleicher, F. Steiner:
"Pflichtenheft: Analgenautomatisierung für Clever Cast- und I Contur";
2012;
12 pages.
-
F. Bleicher, H. Weseslindtner:
"Analysis of Machine Support Systems";
Report for General Motors USA, Detroit;
1999;
34 pages.
More information
-
F. Bleicher, G. Wiesinger:
"Verlaufen der Schnittfuge-Aktive Verlaufskompensation";
Report for Fa. FILL;
2015;
12 pages.
-
F. Bleicher, R. Zisser-Pfeifer, C. Dorn:
"Entgraten von Federbeinen - Entwicklung von Entgratwerkzeugen";
Report for +GF+ Georg Fischer;
Report No. 2,
2008;
10 pages.
-
G. Bohaty, F. Bleicher:
"Bypassversuche";
Report for Hairdreams Haarhandels GmbH;
2016;
8 pages.
-
G. Bohaty, F. Bleicher:
"Manuelles Schröpfen";
Report for Fa. Spinum;
2016;
4 pages.
-
G. Bohaty, F. Bleicher:
"Technologierecherche für das partielle Auftragen von Lack auf strukturierte ABS Grundkörper";
Report for LACberger Ges.m.b.H.;
2015;
7 pages.
-
G. Bohaty, F. Bleicher:
"Umbaumöglichkeiten Walzen";
Report for Hairdreams Haarhandels GmbH;
2016;
8 pages.
-
M. Buhl, J. Lewandowski, B. Kittl, K. Matyas:
"Die Ermittlung des optimalen Einsatzes und Nutzens von MES im Bereich der Produktion in mittleren Unternehmen";
Report for Siemens AG Österreich;
2008.
More information
-
H. Candeger, A. Ernst:
"Zwischenbericht - Flexiebler Backofen - Prototyp II: Löffel Bissen";
Report for waw;
Report No. 9,
2017;
18 pages.
-
C. Dorn, D. Berger, F. Bleicher:
"Entwicklung von Naturfaserverbundplatten mit integrierten Befestigungs- und Spannelementen für Böden von Transportern";
Report for FFG;
2009.
More information
-
C. Dorn, D. Berger, F. Bleicher, J. Bernreiter:
"Eco2Cut Ecological and Economical Machining";
Report for Cornet;
2009;
72 pages.
More information
-
C. Dorn, D. Berger, R. Zisser-Pfeifer, F. Bleicher:
"Interdisziplinäre Forschung zur Energieoptimierung in Fertigungsbetrieben";
Report for FFG,Klimafond;
2009;
85 pages.
More information
-
C. Dorn, F. Bleicher:
"OPTASENS Combination and evaluation of different sensors and measuring methods for the precision form-measurement on optical surfaces";
Report for Cornet;
2009;
55 pages.
More information
-
C. Dorn, F. Bleicher, E. Haunschmid:
"Trockenbearbeitungsversuche - Werkzeuggeometrie";
Report for Georg Fischer Automotive;
2009;
9 pages.
-
C. Dorn, F. Bleicher, E. Haunschmid, B. Dellinger:
"Trockenbearbeitungsversuche - Beschichtungen";
Report for Georg Fischer Automotive;
2009;
10 pages.
-
C. Dorn, M. Stark, F. Bleicher, J. Bernreiter, C. Salvatori, A. Dimitriou:
"Energetische Untersuchung von Werkzeugmaschinen Firma EMCO";
Report for EMCO;
2010;
38 pages.
-
F. Dür, T. Flatz:
"Cornet Eco2Cut - Final Report Complete";
2013;
262 pages.
-
F. Dür, T. Flatz:
"Projekt INFO Endbericht";
2013;
132 pages.
-
F. Dür, T. Flatz, I. Kovacic, L. Waltenberger, D. Wiegand, S. Emrich, I. Leobner, T. Bednar, K. Eder, W. Kastner, B. Heinzl, K. Kiesel:
"INFO - Interdisziplinäre Forschung zur Energieoptimierung in Fertigungsbetrieben";
Report for Klima- und Energiefonds;
2013;
132 pages.
-
F. Dür, M. Hacksteiner:
"Vertikale Produktion in Smart Cities - 2. Fortschrittsbericht: Manner";
2014;
15 pages.
-
F. Dür, M. Hacksteiner:
"Vertikale Produktion in Smart Cities - 3. Fortschrittsbericht: Manner";
2014;
18 pages.
-
F. Dür, M. Hacksteiner:
"Zwischenbericht - Eco2Production";
2014;
22 pages.
-
C. Einspieler, F. Bleicher:
"Messungen an Heid Drehzentrum CT9";
Report for Heid Drehmaschinen AG;
2008;
11 pages.
More information
-
D. Finkeldei, G. Wiesinger:
"FiberCut Toolbenchmark 2017/2018 Cutting Tests Sumitomo";
Report for Sumitomo;
Report No. *,
2019;
38 pages.
-
D. Finkeldei, G. Wiesinger, S. Bauer:
"FiberCut Toolbenchmark 2017/2018 Cutting Tests Gühring";
Report for Gühring;
Report No. *,
2019;
48 pages.
-
D. Finkeldei, G. Wiesinger, S. Bauer:
"FiberCut Toolbenchmark 2017/2018 Cutting Tests Kennametal";
Report for Kennametal;
Report No. *,
2019;
51 pages.
-
D. Finkeldei, G. Wiesinger, S. Bauer:
"FiberCut Toolbenchmark 2017/2018 Cutting Tests Precorp";
Report for Precorp;
Report No. *,
2019;
64 pages.
-
D. Finkeldei, G. Wiesinger, S. Bauer:
"FiberCut Toolbenchmark 2017/2018 Cutting Tests Walter Tools";
Report for Walter Tools;
Report No. *,
2019;
58 pages.
-
D. Finkeldei, G. Wiesinger, S. Bauer:
"FiberCut Toolbenchmark 2017/2018 Cutting Tests WEMA";
Report for WEMA;
Report No. *,
2019;
52 pages.
-
D. Finkeldei, G. Wiesinger, S. Bauer:
"FiberCutToolbenchmark 2017/2018 Cutting tests Mitsubishi";
Report for Mitsubishi;
Report No. *,
2019;
52 pages.
-
M. Fischer, F. Bleicher:
"Durchlaufzeitoptimierung beim Drahtziehen";
Report for OÖ Förderprogramm Innovations-Assistent TMG;
2005;
4 pages.
More information
-
G. Geiger:
"Endbericht ACETAL";
2012;
39 pages.
-
G. Geiger, D. Berger, T. Alpay, F. Bleicher:
"Produktionssimulation";
Report for Forschungsgemeinschaft Straßenbahn SP2;
2009;
19 pages.
-
G. Geiger, J. Bernreiter, T. Mikats, M. Fuchs:
"Projektbericht - Schleppschleifen von VH Fräswerkzeugen";
2012;
24 pages.
-
G. Geiger, F. Bleicher:
"Rohrverbindungsprüfung";
Report for Forschungsgemeinschaft Straßenbahn SP2;
2009;
5 pages.
-
G. Geiger, C. Dorn, F. Bleicher:
"Anlage zum automatisierten Entgraten - Präsentation Konzept";
Report for Fa.Zörkler;
2009;
25 pages.
-
G. Geiger, S. Rötzer:
""ACETAL Einsatz von Alicona Infinite Focus G4 und Alicona EdgeMaster im Projekt" - Abschlussbericht";
2012;
108 pages.
-
G. Geiger, S. Rötzer:
"ACETAL BOHREN VON GAMMATITANALUMIND TI48AL2CR2NB - Abschlussbericht";
2012;
107 pages.
-
S. Gössinger, C. Lechner, B. Adjassoho:
"Interim report Densified surfaces - Application-orientated investigations";
Report for MFP3.6 Densified Surfaces;
2011;
23 pages.
-
S. Gössinger, C. Lechner, B. Adjassoho:
"Zwischenbericht Arbeitsplan Hydro";
Report for MFP3.6 Densified Surfaces;
Report No. 1,
2011;
25 pages.
-
Ch. Habersohn:
"Datenübertagungssysteme für Spannsysteme";
Report for FFG;
Report No. 2,
2021;
17 pages.
-
Ch. Habersohn:
"Entwicklung eines Algorithmus für die inverse Transformation eines ABB IRB120 Roboters";
Report for COMDATA Projekt VERMAC;
2011;
20 pages.
-
Ch. Habersohn:
"Flexibler Backofen - Kick off";
Report for waw;
Report No. 1,
2015;
13 pages.
-
Ch. Habersohn:
"PlanCut TCC - Konzeptpräsentation Optimierung Konstruktion";
Report for Swarovski;
Report No. 1,
2021;
12 pages.
-
Ch. Habersohn:
"PlanCut TCC Messbericht Temperatureinflüsse";
Report for Swarovski;
Report No. 3,
2021;
13 pages.
-
Ch. Habersohn, H. Candeger:
"Zwischenbericht - Flexiebler Backofen";
Report for waw;
Report No. 2,
2015;
28 pages.
-
Ch. Habersohn, H. Candeger:
"Zwischenbericht - Flexiebler Backofen";
Report for waw;
Report No. 3,
2015;
24 pages.
-
Ch. Habersohn, H. Candeger, A. Ernst:
"Endbericht - Flexibler Backofen";
Report for waw;
2018;
11 pages.
-
Ch. Habersohn, H. Candeger, A. Ernst:
"Zwischenbericht - Flexiebler Backofen";
Report for waw;
Report No. 8,
2017;
18 pages.
-
Ch. Habersohn, C. Lechner, B. Adjassoho:
"Interim report Densified surfaces - Impact energy";
Report for MFP3.6 Densified Surfaces;
2011;
41 pages.
-
Ch. Habersohn, D. Stuhl:
"Messbericht - NPS_Topf_Steifigkeitsmessung";
Report for FFG;
Report No. 2,
2021.
-
Ch. Habersohn, D. Stuhl:
"Messbericht - Schnittversuche Nullpunktspannsystem";
Report for FFG;
Report No. 4,
2021;
11 pages.
-
Ch. Habersohn, D. Stuhl:
"Untersuchungsbericht - DMS Schraubstock";
Report for FFG;
Report No. 5,
2021;
31 pages.
-
N. Herzig, F. Bleicher, L. Meyer, T. Halle:
"Zusammenhänge zwischen werkstoffbedingten Skalierungseffekten und der spezifischen Schnittkraft";
Report for Arbeitskreis Werkstoffe und Simulation der DFG;
2008.
-
B. Holzinger, F. Bammer, D. Schuöcker:
"Bericht im Forschungsbereich "Laserunterstützes Umformen";
Report for Fa. Trumpf Maschinen Austria;
2003.
-
D. Jaunecker, Ch. Habersohn:
"PlanCut TCC Messbericht Kraftevaluierung";
Report for Swarovski;
Report No. 2,
2021;
23 pages.
-
B. Kittl, F. Pauker:
"Endbericht - OPC4Factory";
Report for FFG;
2016;
31 pages.
-
B. Kittl, F. Pauker:
"Zwischenbericht OPC4Factory";
Report No. 01.04.-31.03.,
2015;
20 pages.
-
S. Krall:
"Zwischenbericht FFG Projekt CORNET HaPTec";
Report for FFG;
Report No. 1,
2015;
23 pages.
-
S. Krall, T Holzmann:
"Endbericht FFG Projekt CORNET HaPTec";
Report for FFG;
Report No. 2,
2017;
37 pages.
-
S. Krall, C. Lechner:
"Forschungsaktivitäten des IFT im Projekt SEPIM_2";
Report for FFG;
Report No. 2,
2018;
65 pages.
-
S. Krall, C. Lechner:
"Fortschrittsbericht im Projekt 16025_MFL_Machbarkeitsstudie_MHP-Schienenbearbeitung September 2017";
Report for MFL;
Report No. 2,
2017;
10 pages.
-
S. Krall, C. Lechner:
"Fortschrittsbericht im Projekt16025_MFL_Machbarkeitsstudie_MHP-Schienenbearbeitung Dezember 2017";
Report for MFL;
Report No. 3,
2017;
7 pages.
-
S. Krall, C. Lechner:
"Fortschrittsbericht im ProjektMachbarkeitsstudie MHP-Schienenbearbeitung Jänner 2018";
Report for MFL;
Report No. 4,
2018;
28 pages.
-
S. Krall, C. Lechner:
"Interim report May 2017";
Report for MFL;
Report No. 1,
2017;
51 pages.
-
S. Krall, C. Lechner, C. Pollak:
"Abschlussbericht Projekt SEPIM";
Report for FFG;
Report No. 853742,
2019;
19 pages.
-
S. Krall, M. Nirtl:
"Forschungsaktivitäten des IFT im Projekt SEPIM";
Report for FFG;
Report No. 1,
2018;
30 pages.
-
S. Krall, D. Strasser:
"Zwischenbericht FFG Projekt CORNET Wear-0";
Report for FFG;
Report No. 1,
2020;
19 pages.
-
A. Kratky, F. Bammer, W. Ebner, J. Aichinger:
"Hydrodynamisches Umformen mit Laserstrahlung";
Report for STS Formtechnik GmbH & Co KG;
Report No. 1,
2007;
32 pages.
More information
-
A. Kratky, F. Bammer, D. Schuöcker:
"Zwischenbericht: "Hydrodynamisches Umformen mit Laserunterstutzung"";
Report for STS-Formtechnik;
Report No. 1,
2006;
32 pages.
More information
-
A. Kratky, R. Bielak:
"ELB A3 3. Quartalsbericht "Innenhochdruckumformung von aushärtbaren Aluminium- und Magnesiumlegierungen bei hohen Temperaturen (Warmumformung)"";
Report for ELB Form;
Report No. 3,
2007;
37 pages.
More information
-
A. Kratky, R. Bielak:
"ELB A3 4. Quartalsbericht Innenhochdruckumformung von aushärtbaren Aluminium- und Magnesiumlegierungen bei hohen Temperaturen (Warmumformung)";
Report for ELB Form;
Report No. 4,
2007;
46 pages.
More information
-
A. Kratky, R. Bielak, D. Schuöcker:
"ELB A3 1. Quartalsbericht "Innenhochdruckumformung von aushärtbaren Aluminium- und Magnesiumlegierungen bei hohen Temperaturen (Warmumformung)"";
Report for ELB Form;
Report No. 1,
2006;
31 pages.
More information
-
A. Kratky, G. Liedl, R. Bielak, B. Holzinger, G. Humenberger, W. Ebner, K. Schulmeister, D. Schuöcker, M. Kaltenbrunner:
"Tätigkeitsbericht für die Basissubvention 2005";
Report for BMVIT Bundesministerium für Verkehr, Innovation und Technologie Sekt. III/I1;
Report No. GZ. BMVIT-612.005/0001-III/I1/2005,
2006;
108 pages.
-
A. Kratky, G. Liedl, G. Humenberger:
"Machbarkeitsstudie eines IHU Endbeschnitts";
Report for Elb-Form;
2004.
More information
-
A. Kratky, G. Liedl, D. Schuöcker:
"Laserunterstütztes Tiefziehen mit einem Diodenlaser";
Report for BM-VIT;
2004.
More information
-
A. Kratky, D. Schuöcker, R. Bielak:
"Anwendungen des Lasers zur Unterstützung von Umformprozessen unter besonderer Berücksichtigung des Tiefziehens";
2001.
-
A. Kratky, C. Stiglbrunner:
"Optische Schweißnahterkennungssysteme";
Report for Magna Powertrain;
2004.
More information
-
M. Lamprecht, D. Finkeldei:
"Zerspanungstechnische Charakterisierung von NemAlloy HT-200 (AlCu7)";
2017;
51 pages.
-
C. Lechner, S. Gössinger, B. Adjassoho:
"Interim report Densified surfaces - Surface topography";
Report for MFP3.6 Densified Surfaces;
2011;
47 pages.
-
W. Lepuschitz, T. Trautner, R. Hochh:
"COmBINE - Cloud-Based Production Framework for Networked Small and Medium Enterprises";
Report for FFG;
Report No. 2,
2021.
-
G. Liedl:
"Anhang zum Bericht Laserhärten von Blechen";
Report for voestalpine;
2008.
More information
-
G. Liedl:
"Laserglühen";
Report for Magna;
2004.
More information
-
G. Liedl:
"Laserhärten von Blechen";
Report for voest alpine AG;
2005;
46 pages.
-
G. Liedl:
"Laserhärten von Blechen";
Report for voestalpine AG;
2007;
84 pages.
-
G. Liedl:
"Laserhärten von Blechen";
Report for voestalpine;
2008;
27 pages.
More information
-
G. Liedl:
"Laserschneiden von Verbandsstoffen";
Report for Lohmann&Rauscher;
2003.
More information
-
G. Liedl:
"Laserzündung";
Report for AVL GmbH;
2002.
More information
-
G. Liedl:
"Studie über miniaturisierte Festkörperlaser";
Report for BM-VIT;
2004.
-
G. Liedl:
"Studie zum Zünden von Holzpellets mit Hilfe eines Lasers";
Report for Windhager GmbH;
2003.
-
G. Liedl:
"Temperaturmessung beim Laserschweißen";
Report for JOIN - Kompetenzzentrum für Fügetechnik;
2006.
More information
-
G. Liedl:
"Untersuchungen beim Laserschweissen von Directorblechen";
Report for Delphi Automotive GmbH;
2001.
-
G. Liedl:
"Zünden von Verbrennungsmotoren mittels kurzer Laserpulse";
2002.
More information
-
G. Liedl, R. Bielak:
"Simulation der Krafteinwirkung auf ein Bimetallband";
Report for JOIN - Kompetenzzentrum für Fügetechnik;
2006.
More information
-
G. Liedl, R. Bielak:
"Simulation der Krafteinwirkung auf ein Bimetallband";
Report for Projektpartner JOIN;
2007.
More information
-
G. Liedl, R. Bielak, F. Bammer, A. Kratky, W. Ebner, R. Gómez Vázquez:
"Abgasreinigung durch Laserstrahlung";
2009;
45 pages.
-
G. Liedl, D. Schuöcker:
"Marktübersicht Hochleistungdioden- und Festkörperlaser";
Report for BM-VIT;
2001;
39 pages.
-
G. Liedl, C. Stiglbrunner, B. Budde, W. Rhomberg, B. Wepner:
"Potenzialerhebung Lasertechnik";
2014.
-
D. Nikolaev, G. Wiesinger:
"873477 FORTE 2ARMY Zwischenbericht";
Report for FFG;
Report No. 1,
2020;
15 pages.
-
M. Nirtl:
"Basisstudie zur Entwicklung einer idealen modernen Klarinette";
2013;
70 pages.
-
M. Obermair, A. Raschendorfer, M. Hienzsch, T. Kühn:
"TEC_Endbericht_Cornet";
2014;
110 pages.
-
M. Obermair, A. Raschendorfer, C. Pollak:
"TEC_Endbericht_FFG";
2014;
15 pages.
-
V. Parravicini, K. Svardal, E. Walcher:
"Endbericht Laboruntersuchung zur anaeroben Behandlung von Reststoffen der Stärkeproduktion";
2021;
46 pages.
-
P. Peterko, B. Adjassoho, C. Lechner:
"Interim report Densified surfaces - Compressive residual tress Hardness increase and Wear";
Report for MFP3.6 Densified Surfaces;
2011;
38 pages.
-
L. Pickel, G. Pöchgraber, F. Singer:
"Ergebnisbericht: Machbarkeitsstudie für die Umsetzung einer 100%-Kontrolle im Kunststoffspritzguss";
Report for BS-Modelshop GmbH;
2019;
21 pages.
-
L. Pickel, T. Trautner, F. Singer, G. Pöchgraber:
"Flexible orchestration of machine vision services for manufacturing applications in the TU Wien Pilotfabrik Industrie 4.0";
Report for Adaptive Vision Sp. z o.o.;
Report No. 1,
2020;
5 pages.
-
M. Prießnitz, C. Baumann, S. Krall:
"Zwischenbericht FFG Projekt VIPER";
Report for FFG;
Report No. 1,
2020;
18 pages.
-
M. Prießnitz, C. Baumann, S. Krall:
"Zwischenbericht FFG Projekt VIPER";
Report for FFG;
Report No. 2,
2021;
22 pages.
-
F. Puschitz, F. Bleicher:
"Eingleisung einer simulationsgestützten Steuerung einer Fertigungslinie für Kohlebürsten";
Report for WIFI/Schunk;
Report No. 1,
2008;
14 pages.
More information
-
F. Puschitz, F. Bleicher:
"Kleben von Tränenblechen";
2010;
61 pages.
More information
-
F. Puschitz, F. Bleicher:
"Klebstoffe für die Wimpernverlängerung";
Report for WIFI Wien;
Report No. 1,
2008;
5 pages.
More information
-
F. Puschitz, F. Bleicher:
"Projekt Speed Flex";
Report for WIFI/Schunk;
Report No. 1,
2005;
90 pages.
More information
-
F. Puschitz, F. Bleicher:
"Qualitätssicherung Wareneingang";
Report No. 1,
2010;
45 pages.
More information
-
F. Puschitz, F. Bleicher, H. Caudr, R. Zisser-Pfeifer, C. Dorn, T. Palatin:
"Mikrochipgesteuerter Piezo-Tintenstrahlkopf";
Report for FFG/Durst;
Report No. 1,
2007;
77 pages.
More information
-
F. Puschitz, F. Bleicher, C. Dorn:
"CAM-Benchmark";
Report for WIFI/Schiebl;
Report No. 1,
2006;
14 pages.
More information
-
M. Reiter:
"Endbericht Projekt Pleuel bohren";
Report for BMW-Steyer;
2018;
68 pages.
-
M. Reiter:
"Endbericht Projekt Tiefbohren von Kontaktrohren";
Report for Fronius;
2018;
44 pages.
-
M. Reiter:
"Endbericht Projekt Verschleißminimierung";
Report for BMW-Steyr;
2017;
60 pages.
-
U. Schönbaumsfeld, F. Bleicher, D. Berger:
"IMS Innovations-Management-System";
Report for AWS GZ 13378/1/06;
Report No. 3320.0055/07,
2007;
11 pages.
More information
-
P. Schörghofer:
"FFG-Endbericht";
Report for FFG;
Report No. 2,
2017;
36 pages.
-
P. Schörghofer:
"FFG-Zwischenbericht";
Report for FFG;
Report No. 1,
2015;
14 pages.
-
T. Schumi, G. Liedl:
"Laser-Lichtspur für einspurige Fahrzeuge";
2011;
20 pages.
More information
-
D. Schuöcker, F. Bammer:
"Aufbau eines Faserlasers";
Report for BMVIT;
2007;
11 pages.
More information
-
D. Schuöcker, F. Bammer:
"Forschungsförderungsansuchen der ARGELAS";
Report for BMVIT;
Report No. 1,
2006;
18 pages.
-
D. Schuöcker, F. Bammer, B. Holzinger, T. Schumi:
"Laserunterstütztes Biegen";
Report for Trumpf Maschinen Austria;
2007;
14 pages.
More information
-
D. Schuöcker, R. Bielak, F. Bammer:
"Bericht zur Subvention für das Jahr 2002 "Virtuelle Experimente mit Lasern"";
Report for Bundesministerium für Verkehr, Innovationen und Technologie;
2003.
-
G Schuöcker, R. Bielak:
"Delamination of coatings by HF-inductive heat";
Report for HTC Systems;
2004.
-
G Schuöcker, R. Bielak:
"Delamination of coatings by MF-inductive heat";
Report for HTC Systems;
2004.
-
G Schuöcker, R. Bielak:
"Delamination of coatings by MF-inductive heat - Report on modeling";
Report for HTC Systems;
2004.
-
G Schuöcker, R. Bielak:
"Identification of process temperature - thermo gravimetric analysis";
Report for HTC Systems;
2004.
-
G Schuöcker, R. Bielak:
"Influence of fieldconcentrator materials on thermal efficiency";
Report for HTC Systems;
2004.
-
A. Siller:
"Bearbeitung von Werkstoffkombinationen (MixCut)";
2013;
39 pages.
-
A. Siller:
"BMW MixCut - Statusbericht";
2014;
70 pages.
-
A. Siller:
"BurgDesign Fräsversuche - Statusbericht II";
2013;
36 pages.
-
A. Siller:
"BurgDesign Fräsversuche - Statusbericht III Praktische Erprobung";
2013;
108 pages.
-
A. Siller:
"BurgDesign Fräsversuche - Statusbericht IV";
2014;
42 pages.
-
A. Siller:
"Endbericht Projekt Mix-Cut";
Report for BMW-Steyr;
2016;
45 pages.
-
A. Siller:
"MixCut - Optimierung der Bearbeitung von Werkstoffverbunden";
2014;
32 pages.
-
A. Siller:
"Projektbericht MixCut";
2014;
30 pages.
-
F. Singer, L. Pickel, G. Pöchgraber:
"Dynamische optische Gleisbettdetektion und -analyse mittels Deep Learning";
Report for system7 - rail support GmbH;
Report No. 1,
2020;
18 pages.
-
F. Singer, L. Pickel, S. Saric, D. Egkher, G. Pöchgraber:
"Abschlussbericht: Hochfrequente Datenablage und Bewertung von Präzisionsmesswerten einer dynamischen Machine Vision Anwendung am Beispiel kaltgewalzter Endlosprodukte";
Report for voestalpine BÖHLER Profil GmbH;
2021;
19 pages.
-
F. Singer, L. Pickel, S. Saric, G. Pöchgraber:
"Abschlussbericht - Betrieb und Wartung einer dynamischen optischen 100%-Kontrolle von Bandstahl";
Report for voestalpine BÖHLER Profil GmbH;
Report No. 2,
2020;
24 pages.
-
F. Singer, L. Pickel, S. Saric, G. Pöchgraber:
"Abschlussbericht: Betrieb und Wartung einer dynamischen optischen 100%-Kontrolle von Bandstahl - Teil 2";
Report for voestalpine BÖHLER Profil GmbH;
Report No. 3,
2020;
23 pages.
-
F. Singer, L. Pickel, S. Saric, G. Pöchgraber:
"Abschlussbericht: Dynamische Detektion und Analyse von Gleiskörpern mittels Machine-Vision";
Report for system 7 - rail support GmbH;
2021;
78 pages.
-
F. Singer, L. Pickel, S. Saric, G. Pöchgraber:
"Case Study: Modular Machine Vision System - Dynamic Inline Measurement of Cold Rolled Steel";
Report for Adaptive Vision Sp. z o.o.;
2021;
78 pages.
-
F. Singer, G. Pöchgraber:
"Abschlussbericht: Multisensorische Detektion von Freezing of Gate bei Parkinsonpatienten mittels Machine Learning";
Report for Fa: Riha Volc OG;
Report No. 1,
2021;
11 pages.
-
P. Stadler, Ch. Habersohn:
"InQCIM Prozessregler - Projektmeeting 1";
Report for FFG;
Report No. 1,
2020;
32 pages.
-
P. Stadler, Ch. Habersohn:
"InQCIM Prozessregler - Projektmeeting 2";
Report for FFG;
Report No. 2,
2020;
27 pages.
-
P. Stadler, Ch. Habersohn:
"InQCIM Prozessregler - Projektmeeting 3";
Report for FFG;
Report No. 3,
2020;
28 pages.
-
P. Stadler, Ch. Habersohn:
"InQCIM Prozessregler - Projektmeeting 4";
Report for FFG;
Report No. 4,
2021;
24 pages.
-
P. Stadler, Ch. Habersohn:
"Zwischenbericht InQCIM Prozessregler";
Report for FFG;
Report No. 5,
2021;
24 pages.
-
F. Steiner:
"FFG Basis 1 Endbericht_Clever Cast & i-Contur";
2014;
31 pages.
-
F. Steiner:
"FFG Basis 1 Zwischenbericht_Clever Cast & i-Contur";
2013;
10 pages.
-
F. Steiner, F. Bleicher:
"Machbarkeitsstudie zur Produktion- und Fertigugsentwicklung einer Schutz- und Stützkonstruktion";
2012;
24 pages.
-
A. Steininger:
"Entwicklung einer Technologie zum Prozessmonitoring beim BTA-Tiefbohren";
2015;
26 pages.
-
C. Stiglbrunner:
"Laser Technology Educational Network";
2004.
-
C. Stiglbrunner:
"Virtual EuroLaser Academy - Final Report";
2004.
-
D. Stuhl, Ch. Habersohn:
"Workshop Nullpunktspannsystem";
Report for FFG;
Report No. 1,
2021;
16 pages.
-
M. Trappl:
"FEM - Analyse: Gewichtsreduzierte Kinematik";
2013;
75 pages.
-
M. Trappl:
"FEM-Analyse: Vergleiche";
2013;
81 pages.
-
M. Trappl:
"Winkelstellsystem";
2013;
36 pages.
-
M. Trappl, J. Bernreiter, M. Heger:
"Projektzwischenbericht 1 SBOT MWT-Erodieren";
2013;
27 pages.
-
B. Wallner, T. Trautner, F. Knorr, T. Frühwirth, C. Schwaiger:
"Energy Community between Residential and Industrial Sites powered by Gaia-X";
Report for Siemens;
Report No. 1,
2021;
33 pages.
-
H. Walter, G. Scharinger-Urschitz, J. Brier, M. Haider, R. Mertz, F. Bleicher:
"Fertigungstechnologie für ein Bimetall - Längsrippenrohr für die Anwendung in Latentwärmespeichern";
Report for Österreichische Forschungsförderungsgesellschaft mbH (FFG);
2015;
32 pages.
-
H. Weseslindtner, F. Bleicher et al.:
"Rollenmontageautomat";
Report for Fa. Enzesfeld Caro;
2000;
44 pages.
More information
-
G. Wiesinger, G. Bohaty:
"Tool Life Time Tests 3.0 When Machining Cfrp-Components Of Boeing";
Report for Tiro Tool;
Report No. 3,
2017;
17 pages.
-
G. Wiesinger, J. Brier, M. Klingenbrunner, F. Bleicher:
"Zwischenbericht - November 2014 PremiumKerf";
2014;
43 pages.
-
G. Wiesinger, S. Krall, F. Bleicher:
"Bericht_Kickoff Meeting_PremiumKerf: Basisprogramme Competence Headquarter";
2013;
22 pages.
-
G. Wiesinger, S. Krall, F. Bleicher:
"Endbericht 2013_NFVP Trans";
2013;
44 pages.
-
G. Wiesinger, S. Krall, F. Bleicher:
"Präsentation zur Endbesprechung_NFVP Trans";
2013;
31 pages.
-
G. Wiesinger, S. Krall, F. Bleicher:
"Zwischenbericht 2014: Bisherige Ergebnisse Premium Kerf";
2014;
22 pages.
-
G. Wiesinger, S. Krall, Ch. Habersohn, M. Klingenbrunner, C. Barth, F. Bleicher:
"Zwischenmeeting 2014: PremiumKerf";
2014;
77 pages.
-
G. Wiesinger, S. Krall, M. Klingenbrunner, C. Pollak, R. Fürbacher, F. Bleicher:
"Jahresbericht 2014: Projektstatus_PremiumKerf";
2014;
59 pages.
-
G. Wiesinger, J. Sacherl:
"Intelligente Produktion 2. AS, Industrielle Forschung";
Report for FIBRECUT;
Report No. 3,
2017;
17 pages.
-
G. Wiesinger, C. Sulz, A. Grassinger:
"KRUCH_Endbericht_Innovationsscheck";
Report for FFG;
Report No. 01.02.,
2022;
16 pages.
-
R. Zemann, F. Bleicher, R. Hufschmied, A. Frank, M. Hausammann, J. Scheitle:
"Beurteilung der Bauteilqualität nach der trennenden Bearbeitung von faserverstärkten Kunststoffen";
Report for DIN;
Report No. DIN SPEC 25713,
2017;
47 pages.
