Publikationsliste für
Paul Heinz Mayrhofer
als Autorin / Autor bzw. wesentlich beteiligte Person
504 Datensätze (2012 - 2022)
Bücher und Buch-Herausgaben
D. Holec, L. Zhou, R. Rachbauer, P.H. Mayrhofer:
"Alloy-based design of materials from first principles: An application to functional hard coatings";
in Buchreihe "Density Functional Theory",
Buchreihen-Herausgeber: J. Morin, J. Pelletier;
Nova Science Publishers, Inc,
New York,
2013,
ISBN: 978-1-62417-955-6,
26 S.
Zeitschriftenartikel
H. Asanuma, F. Klimashin, P. Polcik, S. Koloszvári, H. Riedl, P.H. Mayrhofer:
"Thermomechanical properties and oxidation resistance of Ce-Si alloyed Ti-Al-N thin films";
Vacuum,
166
(2019),
0042-207X;
S. 231
- 238.
Zusätzliche Informationen
H. Asanuma, F. Klimashin, P. Polcik, S. Kolozsvári, H. Riedl, P.H. Mayrhofer:
"Hard Ti-Al-N endowed with high heat-resistance through alloying with Ta and Ce";
Surface & Coatings Technology,
372
(2019),
0257-8972;
S. 26
- 33.
Zusätzliche Informationen
H. Asanuma, F. Klimashin, P. Polcik, S. Kolozsvári, H. Riedl, P.H. Mayrhofer:
"Impact of lanthanum and boron on the growth, thermomechanical properties and oxidation resistance of Ti-Al-N thin films";
Thin Solid Films,
688
(2019),
137239;
S. 1
- 8.
Zusätzliche Informationen
H. Asanuma, P. Polcik, S. Kolozsvári, F. Klimashin, H. Riedl, P.H. Mayrhofer:
"Cerium doping of Ti-Al-N coatings for excellent thermal stability and oxidation resistance";
Surface & Coatings Technology,
Part A
(2017),
326;
S. 165
- 172.
Zusätzliche Informationen
E. Aschauer, M. Bartosik, H. Bolvardi, M. Arndt, P. Polcik, A Davydok, C. Krywka, H. Riedl, P.H. Mayrhofer:
"Strain and stress analyses on thermally annealed Ti-Al-N/Mo-Si-B multilayer coatings by synchrotron X-ray diffraction";
Surface & Coatings Technology,
361
(2019),
0257-8972;
S. 364
- 370.
Zusätzliche Informationen
E. Aschauer, H. Riedl, C.M. Koller, H. Bolvardi, M. Arndt, P. Polcik, P.H. Mayrhofer:
"Adhesive wear formation on PVD coated tools applied in hot forming of Al-Si coated steel sheets";
Wear,
430-431
(2019),
0043-1648;
S. 309
- 316.
Zusätzliche Informationen
E. Aschauer, S. Sackl, T. Schachinger, H. Bolvardi, M. Arndt, P. Polcik, H. Riedl, P.H. Mayrhofer:
"Atomic scale investigations of thermally treated nano-structured Ti-Al-N/ Mo-Si-B multilayers";
Surface & Coatings Technology,
349
(2018),
S. 480
- 487.
Zusätzliche Informationen
E. Aschauer, S. Sackl, T. Schachinger, T. Wojcik, H. Bolvardi, M. Arndt, P. Polcik, H. Riedl, P.H. Mayrhofer:
"Nano-structural investigation of Ti-Al-N/Mo-Si-B multilayer coatings: A comparative study by APT and HR-TEM";
Vacuum,
157
(2018),
S. 173
- 179.
Zusätzliche Informationen
E. Aschauer, T. Wojcik, P. Polcik, O Hunold, M. Arndt, V. Dalbauer, P.H. Mayrhofer, P. Felfer, H. Riedl:
"Ultra-High Oxidation Resistance of Nano Structured Thin Films";
SSRN,
1
(2020),
1;
35 S.
Zusätzliche Informationen
E. Aschauer, T. Wojcik, P. Polcik, O Hunold, M. Arndt, V. Dalbauer, P.H. Mayrhofer, P. Felfer, H. Riedl:
"Ultra-high oxidation resistance of nano-structured thin films";
Materials & Design,
201
(2021),
109499;
S. 1
- 11.
Zusätzliche Informationen
A. Azizpour, R Hahn, F. Klimashin, T. Wojcik, E. Poursaeidi, P.H. Mayrhofer:
"Deformation and Cracking Mechanism in CrN/TiN Multilayer Coatings";
Coatings,
9
(2019),
363;
17 S.
Zusätzliche Informationen
M. Bartosik, M. Arndt, R. Rachbauer, C. Krywka, C.M. Koller, J. Keckes, P.H. Mayrhofer:
"Cross-sectional X-ray nano-diffraction and -reflectivity analysis of multilayered AlTiN-TiSiN thin films: Correlation between residual strain and bi-layer period";
Scripta Materialia,
107
(2015),
S. 153
- 156.
Zusätzliche Informationen
M. Bartosik, H. J. Böhm, C. Krywka, Z. Zhang, P.H. Mayrhofer:
"Influence of Phase Transformation on the Damage Tolerance of Ti-Al-N Coatings";
Vacuum,
155
(2018),
S. 153
- 157.
Zusätzliche Informationen
M. Bartosik, R. Daniel, C. Mitterer, I. Matko, M. Burghammer, P.H. Mayrhofer, J. Keckes:
"Cross-sectional X-ray nanobeam diffraction analysis of a compositionally graded CrNx thin film";
Thin Solid Films,
542
(2013),
S. 1
- 4.
Zusätzliche Informationen
M. Bartosik, R Hahn, Z. Zhang, I. Ivanov, M. Arndt, P. Polcik, P.H. Mayrhofer:
"Fracture toughness of Ti-Si-N thin films";
International Journal of Refractory Metals & Hard Materials,
72
(2018),
S. 78
- 82.
M. Bartosik, D. Holec, D. Apel, M. Klaus, C. Genzel, J. Keckes, M. Arndt, P. Polcik, C.M. Koller, P.H. Mayrhofer:
"Thermal expansion of Ti-Al-N and Cr-Al-N coatings";
Scripta Materialia,
127
(2017),
S. 182
- 185.
Zusätzliche Informationen
M. Bartosik, J. Keckes, P.O.A. Persson, H. Riedl, P.H. Mayrhofer:
"Interface controlled microstructure evolution in nanolayered thin films";
Scripta Materialia,
123
(2016),
123;
S. 13
- 16.
Zusätzliche Informationen
M. Bartosik, C. Rumeau, R Hahn, Z. Zhang, P.H. Mayrhofer:
"Fracture toughness and structural evolution in the TiAlN system upon annealing";
Scientific Reports,
7
(2017),
16476;
S. 1
- 9.
Zusätzliche Informationen
M. Bartosik, M. Todt, D. Holec, J. Todt, Z. Zhang, L. Zhou, H. Riedl, H. J. Böhm, F. G. Rammerstorfer, P.H. Mayrhofer:
"Thermal Expansion of Rock-Salt Cubic AlN";
Applied Physics Letters,
107
(2015),
071602.
Zusätzliche Informationen
A. Blutmager, T Spahn, M. Varga, W Friesenbichler, H. Riedl, P.H. Mayrhofer:
"Processing Fiber‐Reinforced Polymers: Specific Wear Phenomena Caused by Filler Materials";
Polymer Engineering and Science,
60
(2020),
1;
S. 78
- 85.
Zusätzliche Informationen
J. Buchinger, N. Koutná, Z. Chen, Z. Zhang, P.H. Mayrhofer, D. Holec, M. Bartosik:
"Toughness enhancement in TiN/WN superlattice thin films";
Acta Materialia,
172
(2019),
S. 18
- 29.
Zusätzliche Informationen
J. Buchinger, L. Löfler, J. Ast, A. Wagner, Z. Chen, J. Michler, Z. Zhang, P.H. Mayrhofer, D. Holec, M. Bartosik:
"Fracture properties of thin film TiN at elevated temperatures";
Materials & Design,
194
(2020),
108885.
Zusätzliche Informationen
J. Buchinger, A. Wagner, Z. Chen, Z. Zhang, D. Holec, P.H. Mayrhofer, M. Bartosik:
"Fracture toughness trends of modulus-matched TiN/(Cr,Al)N thin film superlattices";
Acta Materialia,
202
(2021),
S. 376
- 386.
Zusätzliche Informationen
A. Cakara, M. Bonta, H. Riedl, P.H. Mayrhofer, A. Limbeck:
"Development of a multi-variate calibration approach for quantitative analysis of oxidation resistant Mo-Si-B coatings using laser ablation inductively coupled plasma mass spectrometry";
Spectrochimica Acta Part B,
120
(2016),
S. 57
- 62.
Zusätzliche Informationen
V. Chawla, D. Holec, P.H. Mayrhofer:
"Stabilization criteria for cubic AlN in TiN/AlN and CrN/AlN bi-layer systems";
Journal of Physics D: Applied Physics,
46
(2013),
045305;
S. 1
- 8.
V. Chawla, D. Holec, P.H. Mayrhofer:
"The effect of interlayer composition and thickness on the stabilization of cubic AlN in AlN/Ti-Al-N superlattices";
Thin Solid Films,
565
(2014),
S. 94
- 100.
Z. Chen, D. Holec, M. Bartosik, P.H. Mayrhofer, Z. Zhang:
"Crystallographic orientation dependent maximum layer thickness of cubic AlN in CrN/AlN multilayers";
Acta Materialia,
168
(2019),
S. 190
- 202.
Zusätzliche Informationen
Z. Chen, Q. Shao, M. Bartosik, P.H. Mayrhofer, H. Chen, Z. Zhang:
"Growth-twins in CrN/AlN multilayers induced by hetero-phase interfaces";
Acta Materialia,
185
(2020),
S. 157
- 170.
A.V. Chernogor, F. Klimashin, A.O. Volkhonskii, I.V. Blinkov, P.H. Mayrhofer:
"The impact of Ni and Mo on growth-morphology and mechanical properties of arc evapo-rated Ti-Cr-N hard coatings";
Surface & Coatings Technology,
377
(2019),
S. 124917-1
- 124917-8.
V. Dalbauer, S. Kolozsvári, J. Ramm, C.M. Koller, P.H. Mayrhofer:
"In-situ XRD studies of arc evaporated Al-Cr-O coatings during oxidation";
Surface & Coatings Technology,
358
(2019),
S. 934
- 941.
Zusätzliche Informationen
V. Dalbauer, S. Kolozsvári, J. Ramm, C.M. Koller, P.H. Mayrhofer:
"On the oxidation behaviour of cathodic arc evaporated AleCr and Al-Cr-O coatings";
Vacuum,
163
(2019),
S. 1
- 9.
Zusätzliche Informationen
V. Dalbauer, J. Ramm, S. Kolozsvári, C.M. Koller, P.H. Mayrhofer:
"On the phase evolution of arc evaporated Al-Cr-based intermetallics and oxides";
Thin Solid Films,
644
(2017),
Volume 644;
S. 120
- 128.
Zusätzliche Informationen
V. Dalbauer, J. Ramm, S. Kolozsvári, V. Paneta, C.M. Koller, P.H. Mayrhofer:
"...On the phase formation of cathodic arc evaporated Al1−xCrx-based intermetallic coatings and substoichiometric oxides";
Surface & Coatings Technology,
352
(2018),
352;
S. 392
- 398.
H. Euchner, P.H. Mayrhofer:
"Designing thin film materials - ternary borides from first principles";
Thin Solid Films,
583
(2015),
S. 46
- 49.
H. Euchner, P.H. Mayrhofer:
"Vacancy dependent stability of cubic and wurtzite Ti1-xAlxN";
Surface & Coatings Technology,
275
(2015),
S. 214
- 218.
H. Euchner, P.H. Mayrhofer, H. Riedl, F. Klimashin, A. Limbeck, P. Polcik, S. Kolozsvári:
"Solid solution hardening of vacancy stabilized TixW1−xB2";
Acta Materialia,
101
(2015),
S. 55
- 61.
M. Fallmann, Z. Chen, Z. Zhang, P.H. Mayrhofer, M. Bartosik:
"Mechanical properties and epitaxial growth of TiN/AlN superlattices";
Surface & Coatings Technology,
375
(2019),
S. 1
- 7.
Zusätzliche Informationen
S. Fritze, C.M. Koller, L. von Fieandt, P. Malinovskis, K. Johansson, E. Lewin, P.H. Mayrhofer, U Jansson:
"Influence of deposition temperature on the phase evolution of HfNbTiVZr high-entropy thin films";
Materials,
12
(2019),
587;
S. 01
- 08.
C. Fuger, V. Moraes, R Hahn, H. Bolvardi, P. Polcik, H. Riedl, P.H. Mayrhofer:
"Influence of Tantalum on phase stability and mechanical properties of WB2";
MRS Communications,
9
(2019),
1;
S. 375
- 380.
Zusätzliche Informationen
C. Fuger, B Schwartz, T. Wojcik, V. Moraes, M. Weiss, A. Limbeck, C Macauley, O Hunold, P. Polcik, D. Primetzhofer, P. Felfer, P.H. Mayrhofer, H. Riedl:
"Influence of Ta on the oxidation resistance of WB2-z coatings";
Journal of Alloys and Compounds,
864
(2021),
158121;
S. 1
- 9.
Zusätzliche Informationen
F Giuliani, C. Ciurea, V. Bhakhri, M Werchota, L.J. Vandeperre, P.H. Mayrhofer:
"Deformation behaviour of TiN and Ti-Al-N coatings at 295 to 573K";
Thin Solid Films,
688
(2019),
137363;
S. 01
- 07.
S.A. Glatz, H. Bolvardi, S. Kolozsvári, C.M. Koller, H. Riedl, P.H. Mayrhofer:
"Arc evaporated W-alloyed Ti-Al-N coatings for improved thermal stability, mechanical, and tribological properties";
Surface & Coatings Technology,
(2017),
SCT-22634;
S. 1.
S.A. Glatz, R. Hollerweger, P. Polcik, R. Rachbauer, J. Paulitsch, P.H. Mayrhofer:
"Thermal stability and mechanical properties of arc evaporated Ti-Al-Zr-N hard coatings";
Surface & Coatings Technology,
266
(2015),
S. 1
- 9.
Zusätzliche Informationen
S.A. Glatz, C.M. Koller, H. Bolvardi, S. Koloszvári, H. Riedl, P.H. Mayrhofer:
"Influence of Mo on the structure and the tribomechanical properties of arc evaporated Ti-Al-N";
Surface & Coatings Technology,
311
(2017),
S. 330
- 336.
Zusätzliche Informationen
S.A. Glatz, V. Moraes, C.M. Koller, H. Riedl, H. Bolvardi, S. Kolozsvári, P.H. Mayrhofer:
"Effect of Mo on the thermal stability, oxidation resistance, and tribo-mechanical properties of arc evaporated Ti-Al-N coatings";
Journal of Vacuum Science & Technology A,
35
(2017),
6;
S. 061515.
T. Glechner, R Hahn, T. Wojcik, D. Holec, S. Kolozsvári, H Zaid, S. Kodambaka, P.H. Mayrhofer, H. Riedl:
"Assessment of ductile character in superhard Ta-C-N thin films";
Acta Materialia,
179
(2019),
1359-6454;
S. 17
- 25.
Zusätzliche Informationen
T. Glechner, P.H. Mayrhofer, D. Holec, S. Fritze, E. Lewin, V. Paneta, D. Primetzhofer, S. Koloszvári, H. Riedl:
"Tuning structure and mechanical properties of Ta-C coatings by N-alloying and vacancy population";
Scientific Reports,
8
(2018),
1;
S. 17669
- 17679.
Zusätzliche Informationen
X. Gu, Z. Zhang, M. Bartosik, P.H. Mayrhofer, H. Duan:
"Dislocation densities and alternating strain fields in CrN/AlN nanolayers";
Thin Solid Films,
638
(2017),
S. 189
- 200.
R Hahn, M. Bartosik, M. Arndt, P. Polcik, P.H. Mayrhofer:
"Annealing effect on the fracture toughness of CrN/TiN superlattices";
International Journal of Refractory Metals & Hard Materials,
71
(2018),
S. 352
- 356.
Zusätzliche Informationen
R Hahn, M. Bartosik, R. Soler, C. Kirchlechner, G. Dehm, P.H. Mayrhofer:
"Superlattice effect for enhanced fracture toughness of hard coatings";
Scripta Materialia,
124
(2016),
S. 67
- 70.
R Hahn, A Kirnbauer, M. Bartosik, S. Kolozsvári, P.H. Mayrhofer:
"Toughness of Si alloyed high-entropy nitride coatings";
Materials Letters,
251
(2019),
S. 238
- 240.
R Hahn, N. Koutná, T. Wojcik, A Davydok, S. Koloszvári, C. Krywka, D. Holec, M. Bartosik, P.H. Mayrhofer:
"Mechanistic study of superlattice-enabled high toughness and hardness in MoN/TaN coatings";
Communications Materials,
1
(2020),
62;
S. 01
- 10.
R Hahn, V. Moraes, A. Limbeck, P. Polcik, P.H. Mayrhofer, H. Euchner:
"Electron-configuration stabilized (W,Al)B2 solid solutions";
Acta Materialia,
174
(2019),
S. 398
- 405.
Zusätzliche Informationen
R Hahn, A. Tymoszuk, T. Wojcik, A Kirnbauer, T Kozák, J Capek, M. Sauer, A. Foelske-Schmitz, O Hunold, P. Polcik, P.H. Mayrhofer, H. Riedl:
"Phase formation and mechanical properties of reactively and non-reactively sputtered Ti-B-N hard coatings";
Surface & Coatings Technology,
420
(2021),
127327;
S. 1
- 11.
Zusätzliche Informationen
D. Holec, F. Tasnadi, P. Wagner, M. Friak, J. Neugebauer, P.H. Mayrhofer, J. Keckes:
"Macroscopic elastic properties of textured ZrN-AlN polycrystalline aggregates: From ab initio calculations to grain-scale interactions";
Physical Review B,
90
(2014),
S. 184106-1
- 184106-9.
D. Holec, L. Zhou, R. Rachbauer, P.H. Mayrhofer:
"Alloying-related trends from first principles: An application to the Ti-Al-X-N system";
Journal of Applied Physics,
13
(2013),
113510;
S. 1
- 8.
R. Hollerweger, D. Holec, J. Paulitsch, M. Bartosik, R. Daniel, R. Rachbauer, P. Polcik, J. Keckes, C. Krywka, H. Euchner, P.H. Mayrhofer:
"Complementary ab initio and X-ray nanodiffraction studies of Ta2O5";
Acta Materialia,
83
(2015),
S. 276
- 284.
Zusätzliche Informationen
R. Hollerweger, D. Holec, J. Paulitsch, R. Rachbauer, P. Polcik, P.H. Mayrhofer:
"Magnetic field strength influence on the reactive magnetron sputter deposition of Ta2O5";
Journal of Physics D: Applied Physics,
46
(2013),
335203.
R. Hollerweger, H. Riedl, M. Arndt, S. Kolozsvári, S. Primig, P.H. Mayrhofer:
"Guidelines for increasing the oxidation resistance of Ti-Al-N based coatings";
Thin Solid Films,
688
(2019),
137290;
S. 1
- 7.
Zusätzliche Informationen
R. Hollerweger, H. Riedl, J. Paulitsch, M. Arndt, R. Rachbauer, P. Polcik, S. Primig, P.H. Mayrhofer:
"Origin of High Temperature Oxidation Resistance of Ti-Al-Ta-N Coatings";
Surface & Coatings Technology,
257
(2014),
19256;
S. 78
- 86.
Zusätzliche Informationen
J. Jílek Jr., M. Jílek, F. Mendez Martin, P.H. Mayrhofer, S. Veprek:
"High-rate deposition of AlTiN and related coatings with dense morphology by central cylindrical direct current magnetron sputtering";
Thin Solid Films,
556
(2014),
S. 361
- 368.
I. Jouanny, J. Palisaitis, C. Ngo, P.H. Mayrhofer, L. Hultman, P.O.A. Persson, S. Kodambaka:
"In situ Transmission Electron Microscopy Studies of the Kinetics of Pt-Mo alloy Diffusion in ZrB2 Thin Films";
Applied Physics Letters,
103
(2013),
121601;
S. 1
- 3.
S. Kagerer, O Hudak, M. Schloffer, H. Riedl, P.H. Mayrhofer:
"TGO formation and oxygen diffusion in Al-rich gamma-TiAl PVD-coatings on TNM alloys";
Scripta Materialia,
210
(2022),
114455;
S. 1
- 5.
Zusätzliche Informationen
S. Kagerer, L. Zauner, T. Wojcik, S. Koloszvári, T Kozák, J Capek, P Zeman, H. Riedl, P.H. Mayrhofer:
"Reactive HiPIMS deposition of Al-oxide thin films using W-alloyed Al targets";
Surface & Coatings Technology,
422
(2021),
127467;
S. 1
- 10.
Zusätzliche Informationen
A Kirnbauer, V. Dalbauer, P Kutrowatz, S. Kolozsvári, J. Ramm, C.M. Koller, P.H. Mayrhofer:
"Oxygen dependent morphology and mechanical properties of Al Cr (Fe)-based coatings";
Surface & Coatings Technology,
349
(2018),
249;
S. 103
- 110.
Zusätzliche Informationen
A Kirnbauer, A. Kretschmer, C.M. Koller, T. Wojcik, V. Paneta, M. Hans, J.M. Schneider, P. Polcik, P.H. Mayrhofer:
"Mechanical properties and thermal stability of reactively sputtered multi- principal-metal Hf-Ta-Ti-V-Zr nitrides";
Surface & Coatings Technology,
389
(2020),
125674.
Zusätzliche Informationen
A Kirnbauer, C. Spadt, C. Koller, S. Kolozsvári, P.H. Mayrhofer:
"High-entropy oxide thin films based on Al-Cr-Nb-Ta-Ti";
Vacuum,
168
(2019).
Zusätzliche Informationen
A Kirnbauer, A. Wagner, V. Moraes, D. Primetzhofer, M. Hans, J.M. Schneider, P. Polcik, P.H. Mayrhofer:
"Thermal stability and mechanical properties of sputtered (Hf,Ta,V,W,Zr)-diborides";
Acta Materialia,
200
(2020),
S. 559
- 569.
Zusätzliche Informationen
F. Klimashin, H. Euchner, P.H. Mayrhofer:
"Computational and experimental studies on structure and mechanical properties of Mo-Al-N";
Acta Materialia,
107
(2016),
S. 273
- 278.
Zusätzliche Informationen
F. Klimashin, N. Koutná, H. Euchner, D. Holec, P.H. Mayrhofer:
"The impact of nitrogen content and vacancies on structure and mechanical properties of Mo-N thin films";
Journal of Applied Physics,
120
(2016),
185301;
S. 1
- 10.
Zusätzliche Informationen
F. Klimashin, L. Lobmaier, N. Koutná, D. Holec, P.H. Mayrhofer:
"The MoN-TaN system: Role of vacancies in phase stability and mechanical properties";
Materials & Design,
202
(2021),
109568;
S. 1
- 12.
F. Klimashin, P.H. Mayrhofer:
"Ab initio-guided development of super-hard Mo-Al-Cr-N coatings";
Scripta Materialia,
140
(2017),
S. 27
- 30.
Zusätzliche Informationen
F. Klimashin, H. Riedl, D. Primetzhofer, J. Paulitsch, P.H. Mayrhofer:
"Composition driven phase evolution and mechanical properties of Mo-Cr-N hard coatings";
Journal of Applied Physics,
118
(2015),
025305;
S. 1
- 7.
S. Kodambaka, C. Ngo, J. Palisaitis, P.H. Mayrhofer, L. Hultman, P.O.A. Persson:
"Kinetics of Ga Droplet Decay on Thin Carbon Films";
Applied Physics Letters,
102
(2013),
161601;
S. 1
- 4.
B. Kohlhauser, H. Riedl, C.M. Koller, V. Paneta, S. Kolozsvári, P.H. Mayrhofer:
"How microalloying of the Al target can improve process and film characteristics of sputtered alumina";
Surface & Coatings Technology,
393
(2020),
125762;
S. 1
- 9.
Zusätzliche Informationen
B. Kohlhauser, M. Ripoll Rodríguez, H. Riedl, C.M. Koller, N. Koutná, A. Amsüss, H. Hutter, G Ramirez, C. Gachot, A. Erdemir, P.H. Mayrhofer:
"How to get noWear? - A new take on the design of in-situ formed high performing low-friction tribofilms";
Materials & Design,
190
(2020),
108519;
S. 1
- 8.
Zusätzliche Informationen
C.M. Koller, V. Dalbauer, A Kirnbauer, S. Löffler, S. Kolozsvári, J. Ramm, P.H. Mayrhofer:
"Selective phase formation in substoichiometric Al-Cr-based oxides";
Scripta Materialia,
139
(2017),
139;
S. 144
- 147.
Zusätzliche Informationen
C.M. Koller, V. Dalbauer, A Kirnbauer, M. Sauer, S. Kolozsvári, J. Ramm, P.H. Mayrhofer:
"Impact of Si and B on the phase stability of cathodic arc evaporated Al0.70Cr0.30-based oxides";
Scripta Materialia,
152
(2018),
152;
S. 107
- 111.
C.M. Koller, V. Dalbauer, S. Kolozsvári, J. Ramm, P.H. Mayrhofer:
"Microstructure and phase evolution of gradually-structured arc evaporated Al0.25Cr0.75-based oxide coatings";
Vacuum,
155
(2018),
155;
S. 645
- 649.
C.M. Koller, V. Dalbauer, A Schmelz, R. Raab, P. Polcik, J. Ramm, P.H. Mayrhofer:
"Structure, mechanical properties, and thermal stability of arc evaporated (Al1-xCrx)2O3 coatings";
Surface & Coatings Technology,
342
(2018),
342;
S. 37
- 47.
C.M. Koller, S.A. Glatz, S. Koloszvári, H. Bolvardi, P.H. Mayrhofer:
"Thermal stability and oxidation resistance of architecturally designed Ti-Al-N and Ti-Al-Ta-N-based coatings";
Surface & Coatings Technology,
385
(2020),
125444;
S. 01
- 11.
C.M. Koller, S.A. Glatz, S. Koloszvári, J. Ramm, P.H. Mayrhofer:
"Influence of substrate bias on structure and mechanical properties of arc evaporated (Al,Cr)2O3 and (Al,Cr,Fe)2O3 coatings";
Surface & Coatings Technology,
319
(2017),
319;
S. 389
- 393.
C.M. Koller, S.A. Glatz, H. Riedl, S. Kolozsvári, P. Polcik, H. Bolvardi, P.H. Mayrhofer:
"Structure and mechanical properties of architecturally designed Ti-Al-N and Ti-Al-Ta-N-based multilayers";
Surface & Coatings Technology,
385
(2020),
125355;
S. 1
- 10.
Zusätzliche Informationen
C.M. Koller, R Hahn, J. Ramm, S. Kolozsvári, P.H. Mayrhofer:
"Microstructural modifications in powder-metallurgically produced Al0.675Cr0.275Fe0.05 targets during cathodic arc evaporation";
Journal of Vacuum Science & Technology A,
A34
(2016),
A34;
S. 1
- 8.
C.M. Koller, R Hahn, B. Widrig, J. Ramm, S. Kolozsvári, J. Paulitsch, P.H. Mayrhofer:
"Triggering the Phase Evolution Within (Al,Cr)2O3-based Coatings by Alloying and Microstructural Concepts";
Berg- und Hüttenmännische Monatshefte (BHM),
191
(2016),
Volume 161 Issue 7;
S. 325
- 329.
C.M. Koller, R. Hollerweger, R. Rachbauer, S. Kolozsvári, J. Paulitsch, P.H. Mayrhofer:
"Annealing studies and oxidation tests of a hybrid multilayer arrangement of cathodic arc evaporated Ti-Al-N and reactively sputtered Ta-Al-N coatings";
Surface & Coatings Technology,
283
(2015),
S. 89
- 95.
Zusätzliche Informationen
C.M. Koller, R. Hollerweger, C. Sabitzer, R. Rachbauer, P. Polcik, J. Paulitsch, P.H. Mayrhofer:
"Thermal Stability and Oxidation Resistance of Arc Evaporated TiAlN, TaAlN, TiAlTaN, and TiAlN/TaAlN Coatings";
Surface & Coatings Technology,
Volume 259, Part C
(2014),
259;
S. 599
- 607.
Zusätzliche Informationen
C.M. Koller, A Kirnbauer, V. Dalbauer, S. Koloszvári, J. Ramm, P.H. Mayrhofer:
"On the oxidation behaviour of cathodic arc evaporated Al-Cr-Fe and Al-Cr-Fe-O coatings part I";
Journal of Vacuum Science & Technology A (eingeladen),
37
(2019),
041503;
S. 01
- 10.
C.M. Koller, A Kirnbauer, R Hahn, B. Widrig, S. Koloszvári, J. Ramm, P.H. Mayrhofer:
"Oxidation behavior of intermetallic Al-Cr and Al-Cr-Fe macroparticles";
Journal of Vacuum Science & Technology A,
35
(2017),
6;
S. 06160101
- 06160110.
C.M. Koller, A Kirnbauer, S. Koloszvári, J. Ramm, P.H. Mayrhofer:
"On the oxidation behaviour of cathodic arc evaporated Al-Cr-Fe and Al-Cr-Fe-O coatings part II: TEM in-vestigations of Al0.675Cr0.275Fe0.05-based films";
Journal of Vacuum Science & Technology A (eingeladen),
37
(2019),
041504;
S. 01
- 09.
C.M. Koller, A Kirnbauer, S. Kolozsvári, J. Ramm, P.H. Mayrhofer:
"Impact of morphology and phase composition on mechanical properties of α-structured (Cr,Al)2O3/(Al,Cr,X)2O3 multilayers";
Scripta Materialia,
146
(2018),
146;
S. 208
- 212.
C.M. Koller, A Kirnbauer, R. Rachbauer, S. Kolozsvári, P.H. Mayrhofer:
"Thermally-induced phase transformation sequence of arc evaporated Ta-Al-N coatings";
Scripta Materialia,
113
(2016),
S. 75
- 78.
C.M. Koller, H Marihart, H. Bolvardi, S. Kolozsvári, P.H. Mayrhofer:
"Structure, phase evolution, and mechanical properties of DC, pulsed DC, and high power impulse magnetron sputtered Ta-N films";
Surface & Coatings Technology,
347
(2018),
347;
S. 304
- 312.
C.M. Koller, J. Ramm, S. Kolozsvári, F. Munnik, J. Paulitsch, P.H. Mayrhofer:
"Corundum-type Fe-doped cathodic arc evaporated Al-Cr-O coatings";
Scripta Materialia,
Volume 97
(2015),
S. 49
- 52.
Zusätzliche Informationen
C.M. Koller, J. Ramm, S. Kolozsvári, J. Paulitsch, P.H. Mayrhofer:
"Role of droplets and iron on the phase formation of arc evaporated Al-Cr-oxide coatings";
Surface & Coatings Technology,
Volume 276
(2015),
S. 735
- 742.
Zusätzliche Informationen
C.M. Koller, M. Stüber, P.H. Mayrhofer:
"Progress in the synthesis of Al- and Cr-based sesquioxide coatings for protective applications";
Journal of Vacuum Science & Technology A (eingeladen),
37
(2019),
060802;
S. 01
- 23.
N. Koutná, P. Řehák, Z. Chen, M. Bartosik, M. Fallmann, M. Černý, Z. Zhang, M. Friak, M. Sob, P.H. Mayrhofer, D. Holec:
"Correlating structural and mechanical properties of AlN/TiN superlattice films";
Scripta Materialia,
165
(2019),
S. 159
- 163.
Zusätzliche Informationen
N. Koutná, A. Brenner, D. Holec, P.H. Mayrhofer:
"High-throughput first-principles search for ceramic superlattices with improved ductility and fracture resistance";
Acta Materialia,
206
(2021),
116615;
S. 1
- 10.
N. Koutná, P. Erdely, S. Zöhrer, R. Franz, Y. Du, S. Liu, P.H. Mayrhofer, D. Holec:
"Experimental chemistry and structural stability of AlNb3 enabled by antisite defects formation";
Materials,
12
(2019),
1104;
S. 1
- 11.
N. Koutná, R Hahn, J. Zálesák, M. Friak, M. Bartosik, J. Keckes, M. Sob, P.H. Mayrhofer, D. Holec:
"Point-defect engineering of MoN/TaN superlattice films: A first-principles and experimental study";
Materials & Design,
186
(2020),
S. 1
- 11.
N. Koutná, D. Holec, M. Friak, P.H. Mayrhofer et al.:
"Stability and elasticity of metastable solid solutions and superlattices in the MoN--TaN system: First-principles calculations";
Materials & Design,
144
(2018),
S. 310
- 322.
Zusätzliche Informationen
N. Koutná, D. Holec, O. Svoboda, F. Klimashin, P.H. Mayrhofer:
"Point defects stabilise cubic Mo-N and Ta-N";
Journal of Physics D: Applied Physics,
49
(2016),
375303;
S. 1
- 8.
Zusätzliche Informationen
A. Kretschmer, D. Holec, K. Yalamanchili, H. Rudigier, M. Hans, J.M. Schneider, P.H. Mayrhofer:
"Strain-stabilized Al-containing high-entropy sublattice nitrides";
Acta Materialia,
224
(2022),
S. 117483.
Zusätzliche Informationen
A. Kretschmer, A Kirnbauer, V. Moraes, D. Primetzhofer, K. Yalamanchili, H. Rudigier, P.H. Mayrhofer:
"Improving phase stability, hardness, and oxidation resistance of reactively magnetron sputtered (Al,Cr,Nb,Ta,Ti)N thin films by Si-alloying";
Surface & Coatings Technology,
416
(2021),
127162.
Zusätzliche Informationen
A. Kretschmer, T. Wojcik, R. Schuster, K. Yalamanchili, H. Rudigier, P.H. Mayrhofer:
"Tuning of structure, grain orientation and mechanical properties in reactively sputtered (Al,Mo,Ta,V,W)N";
Materials & Design,
213
(2021),
S. 110346.
Zusätzliche Informationen
H. Lasfargues, T. Glechner, C.M. Koller, V. Paneta, D. Primetzhofer, S. Kolozsvári, D. Holec, H. Riedl, P.H. Mayrhofer:
"Non-reactively sputtered ultra-high temperature Hf-C and Ta-C coatings";
Surface & Coatings Technology,
309
(2017),
S. 436
- 444.
Zusätzliche Informationen
P.H. Mayrhofer, A Kirnbauer, Ph Ertelthaler, C.M. Koller:
"High-entropy ceramic thin films; A case study on transition metal diborides";
Scripta Materialia,
149
(2018),
149;
S. 93
- 97.
P.H. Mayrhofer, D. Sonnleitner, M. Bartosik, D. Holec:
"Structural and mechanical evolution of reactively and non-reactively sputtered Zr-Al-N thin films during annealing";
Surface & Coatings Technology,
244
(2014),
S. 52
- 56.
P.M. Mayrhofer, H. Riedl, H. Euchner, M. Stöger-Pollach, P.H. Mayrhofer, A. Bittner, U. Schmid:
"Microstructure and piezoelectric response of YxAl1−xN thin films";
Acta Materialia,
100
(2015),
S. 81
- 89.
Zusätzliche Informationen
V. Moraes, H. Bolvardi, S. Koloszvári, H. Riedl, P.H. Mayrhofer:
"Thermal stability and mechanical properties of Ti-Al-B-N thin films";
International Journal of Refractory Metals & Hard Materials,
71
(2018),
S. 320
- 324.
Zusätzliche Informationen
V. Moraes, C. Fuger, V. Paneta, D. Primetzhofer, P. Polcik, H. Bolvardi, M. Arndt, H. Riedl, P.H. Mayrhofer:
"Substoichiometry and tantalum dependent thermal stability of α-structured W-Ta-B";
Scripta Materialia,
155
(2018),
S. 5
- 10.
V. Moraes, H. Riedl, C. Fuger, P. Polcik, H. Bolvardi, D. Holec, P.H. Mayrhofer:
"Ab initio inspired design of ternary boride thin films";
Scientific Reports,
8
(2018),
9288;
S. 1
- 9.
Zusätzliche Informationen
V. Moraes, H. Riedl, R. Rachbauer, S. Kolozsvari, M. Ikeda, L. Prochaska, S. Paschen, P.H. Mayrhofer:
"Thermal conductivity and mechanical properties of AlN-based thin films";
Journal of Applied Physics,
119
(2016),
S. 225304-1
- 225304-10.
Zusätzliche Informationen
V. Moraes, L. Zauner, T. Wojcik, M. Arndt, P. Polcik, H. Riedl, P.H. Mayrhofer:
"Thermally stable superhard diborides: An ab initio guided case study for V-W-diboride thin films";
Acta Materialia,
186
(2020),
186;
S. 487
- 493.
Zusätzliche Informationen
V. Nedelkovski, R Hahn, P.H. Mayrhofer, A. Steiger-Thirsfeld, J. Bernardi, P.J. Thurner:
"Influence of experimental constraints on micromechanical assessment of micromachined hard-tissue samples";
Journal of the Mechanical Behavior of Biomedical Materials,
106
(2020),
103741.
J. Paulitsch, R. Rachbauer, J. Ramm, P. Polcik, P.H. Mayrhofer:
"Influence of Si on the target oxide poisoning during reactive arc evaporation of (Al,Cr)2O3 coatings";
Vacuum,
100
(2014),
S. 29
- 32.
M. Pfeiler-Deutschmann, P.H. Mayrhofer, K. Chladil, M. Penoy, C. Michotte, M. Kathrein, C. Mitterer:
"Effect of wavelength modulation of arc evaporated Ti-Al-N/Ti-Al-V-N multilayer coatings on microstructure and mechanical/tribological properties";
Thin Solid Films,
581
(2015),
S. 20
- 24.
R. Raab, C.M. Koller, S. Koloszvári, J. Ramm, P.H. Mayrhofer:
"Thermal stability of arc evaporated Al-Cr-O-N coatings";
Surface & Coatings Technology,
356
(2018),
356;
S. 64
- 71.
R. Raab, C.M. Koller, S. Kolozsvári, J. Ramm, P.H. Mayrhofer:
"Thermal stability of arc evaporated Al-Cr-O and Al-Cr-O/ Al-Cr-N multilayer coatings";
Surface & Coatings Technology,
352
(2018),
352;
S. 213
- 221.
R. Raab, C.M. Koller, H. Riedl, S. Kolozsvári, J. Ramm, P.H. Mayrhofer:
"The influence of synthetic air flow on the properties of arc evaporated Al-Cr-O-N coatings";
Thin Solid Films,
688
(2019),
137252;
S. 1
- 8.
Zusätzliche Informationen
H. Riedl, E. Aschauer, C.M. Koller, P. Polcik, M. Arndt, P.H. Mayrhofer:
"Ti-Al-N/Mo-Si-B multilayers: An architectural arrangement for high temperature oxidation resistant hard coatings";
Surface & Coatings Technology,
328
(2017),
S. 80
- 88.
Zusätzliche Informationen
H. Riedl, T. Glechner, T. Wojcik, N. Koutná, S. Kolozsvári, V. Paneta, D. Holec, D. Primetzhofer, P.H. Mayrhofer:
"Influence of carbon deficiency on phase formation and thermal stability of super-hard TaCy thin films";
Scripta Materialia,
149
(2018),
149;
S. 150
- 154.
Zusätzliche Informationen
H. Riedl, D. Holec, R. Rachbauer, P. Polcik, R. Hollerweger, J. Paulitsch, P.H. Mayrhofer:
"Phase stability, mechanical properties and thermal stability of Y alloyed Ti-Al-N coatings";
Surface & Coatings Technology,
235
(2013),
0;
S. 174
- 180.
Zusätzliche Informationen
H. Riedl, C.M. Koller, A. Limbeck, J Kalas, P. Polcik, P.H. Mayrhofer:
"Oxidation behavior and tribological properties of multilayered Ti-Al-N/Mo-Si-B thin films";
Journal of Vacuum Science & Technology A,
33
(2015),
5;
S. 05E129-1
- 05E129-9.
Zusätzliche Informationen
H. Riedl, C.M. Koller, F. Munnik, H. Hutter, F. Mendez Martin, R. Rachbauer, S. Kolozsvári, M. Bartosik, P.H. Mayrhofer:
"Influence of oxygen impurities on growth morphology, structure and mechanical properties of Ti-Al-N thin films";
Thin Solid Films,
603
(2016),
S. 39
- 49.
Zusätzliche Informationen
H. Riedl, A. Vieweg, A. Limbeck, J Kalas, M. Arndt, P. Polcik, H. Euchner, M. Bartosik, P.H. Mayrhofer:
"Thermal stability and mechanical properties of boron enhanced Mo-Si coatings";
Surface & Coatings Technology,
280
(2015),
S. 282
- 290.
Zusätzliche Informationen
H. Riedl, J. Zálesák, M. Arndt, P. Polcik, D. Holec, P.H. Mayrhofer:
"Ab initio studies on the adsorption and implantation of Al and Fe to nitride materials";
Journal of Applied Physics,
118
(2015),
12;
S. 125306-1
- 125306-8.
Zusätzliche Informationen
C. Sabitzer, J. Paulitsch, S. Kolozsvári, R. Rachbauer, P.H. Mayrhofer:
"Influence of bias potential and layer arrangement on structure and mechanical properties of arc evaporated Al-Cr-N coatings";
Vacuum,
106
(2014),
S. 49
- 52.
C. Sabitzer, C. Steinkellner, C.M. Koller, P. Polcik, R. Rachbauer, P.H. Mayrhofer:
"Diffusion behavior of C, Cr, and Fe in arc evaporated TiN- and CrN-based coatings and their influence on thermal stability and hardness";
Surface & Coatings Technology,
275
(2015),
275;
S. 185
- 192.
Zusätzliche Informationen
M. Schlögl, J. Keckes, C. Kirchlechner, J. Paulitsch, P.H. Mayrhofer:
"Effects of structure and interfaces on fracture toughness of CrN/AlN multilayer coatings";
Scripta Materialia,
68
(2013),
S. 917
- 920.
M. Schlögl, B. Mayer, J. Paulitsch, P.H. Mayrhofer:
"Influence of CrN and AlN layer thicknesses on structure and mechanical properties of CrN/AlN superlattices";
Thin Solid Films,
545
(2013),
S. 375
- 379.
M. Schlögl, J. Paulitsch, J. Keckes, P.H. Mayrhofer:
"Influence of AlN Layers on Mechanical Properties and Thermal Stability of Cr-Based Nitride Coatings";
Thin Solid Films,
531
(2013),
S. 113
- 118.
Zusätzliche Informationen
M. Schlögl, J. Paulitsch, P.H. Mayrhofer:
"Thermal stability of CrN/AlN superlattice coatings";
Surface & Coatings Technology,
240
(2014),
S. 250
- 254.
W. Seidl, M. Bartosik, S. Kolozsvári, H. Bolvardi, P.H. Mayrhofer:
"Improved mechanical properties, thermal stabilities, and oxidation resistance of arc evaporated Ti-Al-N coatings through alloying with Ta";
Surface & Coatings Technology,
344
(2018),
S. 244
- 249.
W. Seidl, M. Bartosik, S. Kolozsvári, H. Bolvardi, P.H. Mayrhofer:
"Influence of coating thickness and substrate on stresses and mechanical properties of (Ti,Al,Ta)N/(Al,Cr)N multilayers";
Surface & Coatings Technology,
347
(2018),
2018;
S. 92
- 98.
W. Seidl, M. Bartosik, S. Kolozsvári, H. Bolvardi, P.H. Mayrhofer:
"Influence of Ta on the fracture toughness of arc evaporated Ti-Al-N";
Vacuum,
150
(2018),
S. 24
- 28.
W. Seidl, M. Bartosik, S. Kolozsvári, H. Bolvardi, P.H. Mayrhofer:
"Mechanical properties and oxidation resistance of Al-Cr-N/Ti-Al-Ta-N multilayer coatings";
Surface & Coatings Technology,
347
(2018),
S. 427
- 433.
M. Sperr, Z. Zhang, Y.P. Ivanov, P.H. Mayrhofer, M. Bartosik:
"Correlating elemental distribution with mechanical properties of TiN/SiNx nanocomposite coatings";
Scripta Materialia,
170
(2019),
S. 20
- 23.
Zusätzliche Informationen
M. Stüber, H. Riedl, T. Wojcik, S. Ulrich, H. Leiste, P.H. Mayrhofer:
"Microstructure of Al-containing magnetron sputtered TiB2 thin films";
Thin Solid Films,
688
(2019),
137361;
S. 1
- 12.
Zusätzliche Informationen
L. Székely, G. Sáfrán, V. Kis, Z. Horváth, P.H. Mayrhofer, M. Moser, G. Radnóczi, F. Misják, P. Barna:
"Crossover of texture and morphology in (Ti1-xAlx)1-yYyN alloy films and the pathway of structure evolution";
Surface & Coatings Technology,
257
(2014),
S. 3
- 14.
J. Todt, C. Krywka, Z. Zhang, P.H. Mayrhofer, J. Keckes, M. Bartosik:
"Indentation response of a superlattice thin film revealed by in-situ scanning X-ray nanodiffraction";
Acta Materialia,
195
(2020),
S. 425
- 432.
A. Wagner, D. Holec, P.H. Mayrhofer, M. Bartosik:
"Enhanced fracture toughness in ceramic superlattice thin films: On the role of coherency stresses and misfit dislocations";
Materials & Design,
202
(2021),
109517.
Zusätzliche Informationen
M. Weiss, H. Riedl, V. Moraes, P.H. Mayrhofer, A. Limbeck:
"Laser based analysis of transition metal boride thin films using liquid standards";
Microchemical Journal,
152
(2020),
104449;
S. 1
- 7.
Zusätzliche Informationen
T. Wojcik, V. Ott, S. Özbilen, H. Leiste, S. Ulrich, P.H. Mayrhofer, H. Riedl, M. Stüber:
"Magnetron sputtered NiAl/TiBx multilayer thin films";
Journal of Vacuum Science & Technology A,
40
(2022),
033410;
S. 1
- 21.
Y. Xu, H. Riedl, D. Holec, L. Chen, Y. Du, P.H. Mayrhofer:
"Thermal stability and oxidation resistance of sputtered TiAlCrN hard coatings";
Surface & Coatings Technology,
Supplement C
(2017),
324;
S. 48
- 56.
Zusätzliche Informationen
Z. Xu, Z. Zhang, M. Bartosik, Y. Zhang, P.H. Mayrhofer, Y. He:
"Insight into the structural evolution during TiN film growth via atomic resolution TEM";
Journal of Alloys and Compounds,
754
(2018),
S. 257
- 267.
J. Zalesak, M. Bartosik, R. Daniel, C. Mitterer, C. Krywka, D. Kiener, P.H. Mayrhofer, J. Keckes:
"Cross-sectional structure-property relationship in a graded nanocrystalline Ti1-xAlxN thin film";
Acta Materialia,
102
(2016),
S. 212
- 219.
Zusätzliche Informationen
L. Zauner, A. Bahr, T Kozák, J Capek, T. Wojcik, O Hunold, S. Kolozsvári, P Zeman, P.H. Mayrhofer, H. Riedl:
"Time-averaged and time-resolved ion fluxes related to reactive HiPIMS deposition of Ti-Al-N films";
Surface & Coatings Technology,
424
(2021),
127638;
S. 1
- 12.
Zusätzliche Informationen
L. Zauner, Ph Ertelthaler, T. Wojcik, H. Bolvardi, S. Kolozsvári, P.H. Mayrhofer, H. Riedl:
"Reactive HiPIMS deposition of Ti-Al-N: Influence of the deposition parameters on the cubic to hexagonal phase transition";
Surface & Coatings Technology,
382
(2020),
125007;
S. 1
- 12.
Zusätzliche Informationen
Z. Zhang, Z. Chen, D. Holec, C.H. Liebscher, N. Koutná, M. Bartosik, Y. Zheng, G Dehm, P.H. Mayrhofer:
"Mapping the mechanical properties in nitride coatings at the nanometer scale";
Acta Materialia,
194
(2020),
S. 343
- 353.
Z. Zhang, A. Ghasemi, N. Koutná, Z. Xu, T. Grünstäudl, K. Song, D. Holec, Y. He, P.H. Mayrhofer, M. Bartosik:
"Correlating point defects with mechanical properties in nanocrystalline TiN thin films";
Materials & Design,
207
(2021),
109844;
S. 1
- 10.
Z. Zhang, X. Gu, D. Holec, M. Bartosik, P.H. Mayrhofer, H. Duan:
"Superlattice-induced oscillations of interplanar distances and strain effects in the CrN/AlN system";
Physical Review B,
95
(2017),
S. 155305-1
- 155305-7.
L. Zhou, D. Holec, P.H. Mayrhofer:
"Ab initio study of the alloying effect of transition metals on structure, stability and toughness of CrN";
Journal of Physics D: Applied Physics,
46
(2013),
365301;
S. 1
- 7.
L. Zhou, D. Holec, P.H. Mayrhofer:
"First-principles study of elastic properties of Cr-Al-N";
Journal of Applied Physics,
113
(2013),
043511;
S. 1
- 8.
L. Zhou, F. Klimashin, D. Holec, P.H. Mayrhofer:
"Structural and mechanical properties of nitrogen-deficient cubic Cr-Mo-N and Cr-W-N systems";
Scripta Materialia,
123
(2016),
S. 34
- 37.
Zusätzliche Informationen
L. Zhou, F. Körmann, D. Holec, M. Bartosik, B. Grabowski, J. Neugebauer, P.H. Mayrhofer:
"Structural stability and thermodynamics of CrN magnetic phases from ab initio calculations and experiment";
Physical Review B,
90
(2014),
S. 184102-1
- 184102-12.
Buchbeiträge
P.H. Mayrhofer, R. Rachbauer, D. Holec, F. Rovere, J.M. Schneider:
"Protective Transition Metal Nitride Coatings";
in: "Comprehensive Materials Processing, Volume 4: Films and Coatings: Technology and Recent Development",
Elsevier,
2014, (eingeladen),
S. 355
- 388.
Zusätzliche Informationen
Vorträge und Posterpräsentationen (mit Tagungsband-Eintrag)
H. Asanuma, P. Polcik, S. Kolozsvári, F. Klimashin, H. Riedl, P.H. Mayrhofer:
"Cerium doping of Ti-Al-N coatings for excellent thermal stability and oxidation resistance";
Vortrag: Plansee Seminar 2017,
Reutte;
29.05.2017
- 02.06.2017; in: "Plansee Seminar 2017",
(2017),
S. 50.
Zusätzliche Informationen
H. Asanuma, P. Polcik, S. Kolozsvári, F. Klimashin, H. Riedl, P.H. Mayrhofer:
"Cerium Doping of Ti-Al-N Coatings for Excellent Thermal Stability and Oxidation Resistance";
Poster: 44th International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego;
24.04.2017
- 28.04.2017; in: "ICMCTF 2017",
(2017).
H. Asanuma, P. Polcik, S. Kolozsvári, F. Klimashin, H. Riedl, P.H. Mayrhofer:
"Improved mechanical properties and thermal stability of Ti-Al-N through alloying with La-borides";
Vortrag: 45th International Conference on Metallurgical Coatings and Thin Films 2018,
San Diego, CA;
23.04.2018
- 27.04.2018; in: "Book of Abstracts 45th ICMCTF 2018",
(2018),
S. 9.
Zusätzliche Informationen
E. Aschauer, M. Bartosik, S. Kolozsvári, H. Bolvardi, H. Riedl, P.H. Mayrhofer:
"Stress evolution in high-temperature oxidation resistant Mo1-x-ySixBy/Ti1-xAlxN multilayer coatings";
Vortrag: Stress 2016,
Chicago;
02.10.2016
- 05.10.2016; in: "Stress Evolution in Thin Films and Coatings: from Fundamental Understanding to Control",
(2016),
S. 24.
Zusätzliche Informationen
E. Aschauer, H. Riedl, H. Bolvardi, P. Polcik, P.H. Mayrhofer:
"Influence of Ti on the Phase Stability of Magnetron Sputtered Mo-Si-B Thin Films";
Poster: 45th International Conference on Metallurgical Coatings and Thin Films (ICMCTF) 2018,
San Diego, CA;
23.04.2018
- 27.04.2018; in: "45th ICMCTF",
(2018),
S. 93
- 94.
Zusätzliche Informationen
M. Bartosik, R Hahn, M. Arndt, P. Polcik, P.H. Mayrhofer:
"Fracture toughness of Ti-Si-N nanocomposite thin films";
Vortrag: Plansee Seminar 2017,
Reutte;
29.05.2017
- 02.06.2017; in: ""19th Plansee Seminar 2017"",
Plansee Seminar 2017 Proceedings,
(2017),
Paper-Nr. HM 23,
8 S.
M. Bartosik, R Hahn, P.H. Mayrhofer:
"Mechanical properties of superlattice thin films";
Poster: 15th International Conference on Plasma Surface Engineering,
Garmisch-Partenkirchen;
12.09.2016
- 16.09.2016; in: "Book of Abstracts",
(2016),
S. 299.
M. Bartosik, D. Holec, M. Todt, F. G. Rammerstorfer, P.H. Mayrhofer:
"Thermal Expansion and Elasticity of Metastable Cubic B1-AlN";
Poster: 41st International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego, CA;
28.04.2014
- 02.05.2014; in: "Book of abstracts",
(2014).
M. Bartosik, J. Keckes, R. Daniel, C. Mitterer, M. Burghammer, L. Zhou, D. Holec, P.H. Mayrhofer:
"Cross-Sectional X-ray Nanodiffractionon a Graded Multiphase Cr-N Thin Film";
Vortrag: International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2013,
San Diego;
29.04.2013
- 03.05.2013; in: "Book of abstracts",
(2013).
M. Bartosik, R. Rachbauer, C. Krywka, J. Bernardi, J. Keckes, P.H. Mayrhofer:
"Synchrotron Nanodiffraction and X-TEM on Al-Ti-N based Hard Coatings with different Morphologies";
Vortrag: 41st International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego, CA;
28.04.2014
- 02.05.2014; in: "Book of abstracts",
(2014).
M. Bartosik, H. Riedl, C.M. Koller, P.H. Mayrhofer:
"Interface controlled properties of nanolayered thin films";
Vortrag: 43rd International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego (USA);
25.04.2016
- 29.04.2016; in: "Book of abstracts",
(2016),
S. 44.
M. Bartosik, M. Todt, H. Riedl, C.M. Koller, R. Rachbauer, H. J. Böhm, P.H. Mayrhofer:
"Thermo-mechanically Optimized Multilayer Thin Films";
Vortrag: 42nd International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego, CA;
20.04.2015
- 24.04.2015; in: "Book of abstracts",
(2015),
S. 82.
Zusätzliche Informationen
M. Bonta, A. Cakara, P.H. Mayrhofer, A. Limbeck:
"Quantitative analysis of Mo, Si and B in oxidation resistant coatings";
Vortrag: 18. Tagung Festkörperanalytik,
Wien;
06.07.2015
- 08.07.2015; in: "Kurzfassungen",
(2015),
S. 51.
Zusätzliche Informationen
A. Cakara, M. Bonta, P.H. Mayrhofer, A. Limbeck:
"Development of a LA-ICP-MS method for the quantitative analysis of Mo, Si and B in oxidation resistant coatings";
Poster: 2015 Euopean Winter Conference on Plasma Spectrochemistry,
Münster, Germany;
22.02.2015
- 26.02.2015; in: "Book of Abstracts",
(2015),
1 S.
Zusätzliche Informationen
V. Chawla, J. Wheeler, J Zechner, H. Riedl, P.H. Mayrhofer, I. Utke, J. Michler:
"High temperature mechanical behaviour of epitaxial TiN/AlN nanomultilayers";
Vortrag: 14th International Conference on Plasma Surface Engineering,
Garmisch-Partenkirchen;
15.09.2014
- 19.09.2014; in: "Book of Abstracts",
(2014),
S. 97.
V. Dalbauer, C.M. Koller, J. Ramm, S. Kolozsvári, P.H. Mayrhofer:
"Phase Formation of Cathodic Arc Evaporated AlxCr1-x and AlxCr1-xOδ Thin Films";
Vortrag: AVS 63rd Symposium & Exhibition,
Nashville, TN, USA;
06.11.2016
- 11.11.2016; in: "Book of Abstracts",
(2016),
S. 125.
Zusätzliche Informationen
V. Dalbauer, J. Ramm, S. Koloszvári, C.M. Koller, P.H. Mayrhofer:
"Adjusting the Oxidation Behaviour of arc evaporated Al1-xCrx Intermetallics and Substoichiometric Oxides";
Poster: 45th International Conference on Metallurgical Coatings and Thin Films (ICMCTF) 2018,
San Diego, CA;
23.04.2018
- 27.04.2018; in: "45th ICMCTF",
(2018),
S. 108.
Zusätzliche Informationen
V. Dalbauer, J. Ramm, S. Koloszvári, C.M. Koller, P.H. Mayrhofer:
"On the Thermal Stability of cathodic arc evaporated (Al1-xCrx)2O3 thin films";
Vortrag: 45th International Conference on Metallurgical Coatings and Thin Films (ICMCTF) 2018,
San Diego, CA;
23.04.2018
- 27.04.2018; in: "45th ICMCTF",
(2018),
S. 68.
Zusätzliche Informationen
S. Glatz, R. Hollerweger, S. Kolozsvári, R. Rachbauer, J. Paulitsch, P.H. Mayrhofer:
"Influence of Zirconium on thermal stability and mechanical properties of arc evaporated Ti-Al-N hard coatings";
Poster: 42nd International Conference on Metallurgical Coatings and Thin Films,
San Diego;
20.04.2015
- 24.04.2015; in: "Book of Abstracts",
(2015),
S. 97.
S.A. Glatz, R. Hollerweger, S. Kolozsvári, R. Rachbauer, J. Paulitsch, P.H. Mayrhofer:
"Influence of Zirconium on thermal stability and mechanical properties of arc evaporated Ti-Al-N hard coatings";
Poster: 14th International Conference on Plasma Surface Engineering,
Garmisch-Partenkirchen;
15.09.2014
- 19.09.2014; in: "Book of Abstracts",
(2014),
S. 1.
S.A. Glatz, C.M. Koller, H. Bolvardi, S. Kolozsvári, H. Riedl, P.H. Mayrhofer:
"The effect of alloying molybdenum to cathodic arc evaporated Ti-Al-N coatings on their mechanical properties and thermal stability";
Poster: 15th International Conference on Plasma Surface Engineering,
Garmisch-Partenkirchen;
12.09.2016
- 16.09.2016; in: "Book of Abstracts",
(2016),
S. 111.
Zusätzliche Informationen
S.A. Glatz, C.M. Koller, R. Rachbauer, S. Kolozsvári, H. Riedl, P.H. Mayrhofer:
"Increasing mechanical and tribological properties of cathodic arc evaporated Ti-Al-N coatings by Mo- and W-alloying";
Vortrag: 43rd International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego (USA);
25.04.2016
- 29.04.2016; in: "Book of Abstracts",
(2016),
S. 74.
Zusätzliche Informationen
S.A. Glatz, C.M. Koller, R. Rachbauer, S. Kolozsvári, H. Riedl, P.H. Mayrhofer:
"The effect of alloying molybdenum to cathodic arc evaporated Ti-Al-N coatings on their mechanical properties and thermal stability";
Poster: 43rd International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego (USA);
25.04.2016
- 29.04.2016; in: "Book of Abstracts",
(2016),
S. 96.
Zusätzliche Informationen
S.A. Glatz, C.M. Koller, H. Riedl, R. Rachbauer, S. Kolozsvári, P.H. Mayrhofer:
"The influence of Mo content and bias potential on the structure, mechanical properties, and tribological behaviour of cathodic arc evaporated Ti-Al-N hard coatings";
Poster: AVS 62nd International Symposium & Exhibition,
San Jose, USA;
18.10.2015
- 23.10.2015; in: "Book of Abstracts",
(2015),
S. 147.
Zusätzliche Informationen
S.A. Glatz, J. Paulitsch, H. Riedl, R. Hollerweger, R. Rachbauer, S. Kolozsvári, P.H. Mayrhofer:
"Tribological Behavior of Cathodic Arc Evaporated Ti-Al-N Based Hard Coatings";
Vortrag: 42nd International Conference on Metallurgical Coatings and Thin Films,
San Diego;
20.04.2015
- 24.04.2015; in: "Book of Abstracts",
(2015),
S. 24.
S.A. Glatz, J. Paulitsch, H. Riedl, R. Hollerweger, R. Rachbauer, S. Kolozsvári, P.H. Mayrhofer:
"Tribological Behavior of Cathodic Arc Evaporated Ti-Al-N Based Hard Coatings";
Vortrag: Symposium 2015 der Österreichischen Tribologischen Gesellschaft (ÖTG),
Technologie- und Forschungszentrum, Wiener Neustadt;
25.11.2015; in: "Tribology in Industry and Research - Proceedings",
(2015),
ISBN: 978-3-901657-51-1;
S. 125
- 126.
S.A. Glatz, J. Paulitsch, H. Riedl, R. Rachbauer, S. Kolozsvári, P.H. Mayrhofer:
"Tribological behaviour of cathodic arc evaporated Ti-Al-N, Ti-Al-Zr-N, and Ti-Al-Mo-N hard coatings";
Poster: 20th International Conference on Wear of Materials,
Toronto;
12.04.2015
- 16.04.2015; in: "Book of Abstracts",
(2015),
1 S.
R Hahn, M. Bartosik, M. Arndt, P. Polcik, P.H. Mayrhofer:
"Annealing effect on the fracture toughness of CrN/TiN superlattices";
Vortrag: Plansee Seminar 2017,
Reutte;
29.05.2017
- 02.06.2017; in: "Proceedings of the 19th Plansee Seminar",
Plansee Seminar 2017 Proceedings,
(2017),
Paper-Nr. HM 38/1,
10 S.
Zusätzliche Informationen
R Hahn, M. Bartosik, M. Arndt, P. Polcik, P.H. Mayrhofer:
"X-Ray nanodiffraction pointing out formation limitations of c-AlN in nanolayered thin films";
Poster: NESY - Workshop: Future Possible Use of Neutron and Synchrotron Sources by the Austrian User Community,
Graz;
15.09.2016
- 16.09.2016; in: "Abstract Booklet: Future Possible Use of Neutron and Synchrotron Sources by the Austrian User Community",
(2016),
S. 42.
Zusätzliche Informationen
R Hahn, M. Bartosik, H. Riedl, H. Bolvardi, S. Koloszvári, P.H. Mayrhofer:
"X-ray nano-diffraction demonstrating microstructural evolution and formation limits of CrN/AlN superlattice thin films";
Vortrag: 63. Metallkunde Kolloquium,
Lech am Arlberg;
18.04.2017
- 21.04.2017; in: "63. Metallkunde Kolloquium - Book of Abstracts",
(2017),
S. 30.
Zusätzliche Informationen
R Hahn, M. Bartosik, R. Soler, C. Kirchlechner, G Dehm, P.H. Mayrhofer:
"Superlattice Effect for Enhanced Fracture Toughness of Hard Coatings";
Vortrag: Stress 2016,
Chicago;
02.10.2016
- 05.10.2016; in: "Stress Evolution in Thin Films and Coatings: From Fundamental Understanding to Control",
(2016),
S. 17.
Zusätzliche Informationen
R Hahn, M. Bartosik, A. Tymoszuk, P. Polcik, M. Arndt, P.H. Mayrhofer:
"Effect of Boron on the Mechanical Properties, especially Fracture Toughness, of TiN";
Vortrag: 45th International Conference on Metallurgical Coatings and Thin Films (ICMCTF) 2018,
San Diego, CA;
23.04.2018
- 27.04.2018; in: "International Conference on Metallurgical Coatings Thin Films - Book of Abstracts",
(2018),
S. 2.
Zusätzliche Informationen
D. Holec, M.A. Hartmann, O. Paris, P.H. Mayrhofer:
"Surface energy of carbon fullerenes and nanotubes; A multi-method density functional theory and monte carlo study";
Vortrag: 84th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM),
Novi Sad (eingeladen);
18.03.2013
- 22.03.2013; in: "Book of Abstracts",
(2013).
D. Holec, J. Keckes, P. Wagner, F. Tasnadi, M. Friak, P.H. Mayrhofer:
"Texture dependent elastic constants of polycrystalline Zr-Al-N predicted by Ab Initio calculations";
Vortrag: International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2013,
San Diego;
29.04.2013
- 03.05.2013; in: "Book of Abstracts",
(2013).
D. Holec, N. Koutná, F. Klimashin, P.H. Mayrhofer:
"Stabilisation of Cubic MoN and TaN Systems: The Role Point Defects";
Vortrag: 44th International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego;
24.04.2017
- 28.04.2017; in: "ICMCTF 2017",
(2017).
D. Holec, S. Zhang, W. Fu, C. Humphreys, P.H. Mayrhofer, M. Moram:
"Ab initio evaluation of the potential use of Sc-based III-nitrides in optoelectronics";
Vortrag: 41st International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego, CA;
28.04.2014
- 02.05.2014; in: "Book of abstracts",
(2014).
D. Holec, L. Zhou, P.H. Mayrhofer:
"Predictive power of electron energy los spectra modelled by first principles";
Poster: 41st International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego, CA;
28.04.2014
- 02.05.2014; in: "Book of abstracts",
(2014).
D. Holec, L. Zhou, R. Rachbauer, P.H. Mayrhofer:
"First principles study of alloying trends in Ti-Al-N and Cr-Al-N systems";
Poster: International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2013,
San Diego;
29.04.2013
- 03.05.2013; in: "Book of Abstracts",
(2013).
R. Hollerweger, M. Bartosik, M. Arndt, R. Rachbauer, P. Polcik, J. Paulitsch, D. Holec, P.H. Mayrhofer:
"On the structure and growth of reactive magnetron sputtered Ta2O5";
Vortrag: International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2013,
San Diego;
29.04.2013
- 03.05.2013; in: "Book of Abstracts ICMCTF 2013",
(2013).
R. Hollerweger, D. Holec, M. Arndt, R. Rachbauer, P. Polcik, J. Paulitsch, P.H. Mayrhofer:
"Chemical and Structural Design Concepts for Increasing the Oxidation Resistance of Ti-Al-N based Coatings";
Vortrag: International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2014,
San Diego, CA, USA;
27.04.2014
- 02.05.2014; in: "Abstract Book ICMCTF 2014",
(2014).
Zusätzliche Informationen
R. Hollerweger, H. Riedl, M. Arndt, R. Rachbauer, P. Polcik, J. Paulitsch, P.H. Mayrhofer:
"Oxide phase stabilization and high temperature oxidation resistance of Zr and Ta alloyed Ti-Al-N coatings";
Vortrag: 38th International Conference and Exposition on Advanced Ceramics and Composites,
Daytona Beach, Florida, USA;
27.01.2014
- 31.01.2014; in: "Abstratct Book of ICACC 2014",
Abstracts of the 38th International Conference and Exposition on Advanced Ceramics and Composites,
(2014).
R. Hollerweger, H. Riedl, M. Arndt, R. Rachbauer, P. Polcik, J. Paulitsch, P.H. Mayrhofer:
"Phase stability, thermal stability and oxidation resistance of arc-evaporated Ti-Al-Ta-N coatings";
Poster: International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2013,
San Diego;
29.04.2013
- 03.05.2013; in: "Book of Abstracts ICMCTF 2013",
(2013).
R. Hollerweger, H. Riedl, M. Arndt, R. Rachbauer, P. Polcik, J. Paulitsch, P.H. Mayrhofer:
"Phase stability, thermal stability and oxidation resistance of arc-evaporated Ti-Al-Ta-N coatings";
Poster: Plansee Seminar 2013,
Reutte;
03.06.2013
- 07.06.2013; in: "Proceedings of the 18th Plansee Seminar 2013",
(2013),
S. 2041
- 2048.
F. Klimashin, M. Arndt, P. Polcik, H. Euchner, N. Koutná, D. Holec, P.H. Mayrhofer:
"Hard nitrides based on the refractory Mo and W";
Poster: Plansee Seminar 2017,
Reutte;
29.05.2017
- 02.06.2017; in: "Plansee Seminar 2017",
(2017),
S. 81.
Zusätzliche Informationen
F. Klimashin, M. Arndt, P. Polcik, H. Euchner, N. Koutná, D. Holec, P.H. Mayrhofer:
"Improvement of Thermal Stability and Oxidation Resistance of Molybdenum Nitride";
Vortrag: 44th International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego;
24.04.2017
- 28.04.2017; in: "ICMCTF 2017",
(2017).
Zusätzliche Informationen
F. Klimashin, M. Arndt, P. Polcik, N. Koutná, H. Riedl, C.M. Koller, H. Euchner, D. Holec, P.H. Mayrhofer:
"The Power Of Vacancies In Transition Metal Nitrides";
Vortrag: VEIT 2017,
Sosopol, Bulgarien (eingeladen);
25.09.2017
- 29.09.2017; in: "Twentieth International Summer School On Vacuum, Electron And Ion Technologies",
(2017),
S. 53.
Zusätzliche Informationen
F. Klimashin, M. Arndt, P. Polcik, L. Lobmaier, N. Koutná, D. Holec, P.H. Mayrhofer:
"Vacancies in MONTAN - a mechanism for tuning hardness-toughness relationship";
Poster: 44th International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego;
24.04.2017
- 28.04.2017; in: "ICMCTF 2017",
(2017).
Zusätzliche Informationen
F. Klimashin, H. Euchner, P.H. Mayrhofer:
"Nitrogen vacancies - a key factor in synthesis of Mo-Al-N hard coatings";
Vortrag: 43rd International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego (USA);
25.04.2016
- 29.04.2016; in: "ICMCTF 2016",
(2016),
S. 25.
Zusätzliche Informationen
F. Klimashin, H. Euchner, P.H. Mayrhofer:
"Synthesis of super-hard Mo-Al-Cr-N coatings: ab initio guided empirical approach";
Vortrag: 15th International Conference on Plasma Surface Engineering,
Garmisch-Partenkirchen;
12.09.2016
- 16.09.2016; in: "15th International Conference on Plasma Surface Engineering",
(2016),
S. 21.
Zusätzliche Informationen
F. Klimashin, H. Riedl, J. Paulitsch, P.H. Mayrhofer:
"Impact of molybdenum on structure, mechanical and tribological properties and thermal stability of Cr1-xAlxN coatings";
Poster: 14th International Conference on Plasma Surface Engineering,
Garmisch-Partenkirchen;
16.09.2014
- 19.09.2014; in: "Book of Abstracts",
(2014),
S. 100.
B. Kohlhauser, H. Riedl, C.M. Koller, S. Koloszvári, V. Paneta, D. Primetzhofer, H. Hutter, P.H. Mayrhofer:
"Influence of transition metal dopants on the reactive sputtering process of Al2O3 thin films and their oxidation resistance";
Vortrag: 44th International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego;
18.04.2017
- 23.04.2017; in: "44th ICMCTF",
(2017),
S. 53.
B. Kohlhauser, M. Ripoll Rodríguez, H. Riedl, P.H. Mayrhofer:
"WC-based PVD coatings and their interaction with EP additives in lubricated contacts";
Poster: 21st International Conference on Wear of Materials,
Long Beach, CA;
26.03.2017
- 30.03.2017; in: "21st International Conference on Wear of Materials",
(2017),
S. 114.
C.M. Koller, V. Dalbauer, R. Raab, S. Kolozsvári, J. Ramm, M. Bartosik, P.H. Mayrhofer:
"On the phase evolution of Al-Cr intermetallics and oxides formed by cathodic arc evaporation";
Vortrag: 44th International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego (USA);
24.04.2017
- 28.04.2017; in: "Book of Abstracts",
(2017),
S. 54.
Zusätzliche Informationen
C.M. Koller, V. Dalbauer, B. Widrig, S. Kolozsvári, J. Ramm, P.H. Mayrhofer:
"On the phase evolution of Al-Cr intermetallics and (Al,Cr)2O3 formed by cathodic arc evaporation";
Vortrag: 62. Metallkunde Kolloquium,
Lech am Arlberg;
11.04.2016
- 13.04.2016; in: "Book of Abstracts",
(2016).
Zusätzliche Informationen
C.M. Koller, R Hahn, J. Ramm, S. Kolozsvári, P.H. Mayrhofer:
"Droplets in Cathodic Arc Evaporated (Al,Cr)2O3-based Coatings and the Nucleation of Dedicated Crystalline Structures";
Vortrag: AVS 62nd International Symposium & Exhibition,
San Jose, USA;
18.10.2015
- 23.10.2015; in: "Book of Abstracts",
(2015),
S. 103.
Zusätzliche Informationen
C.M. Koller, D. Holec, J. Ramm, S. Kolozsvári, J. Paulitsch, P.H. Mayrhofer:
"Alloying Trends of Refractory Metals on the Phase Stability of (Al1-x-yCrxMy)2O3 Coatings";
Vortrag: 72nd IUVSTA Workshop,
Seggau;
07.04.2014
- 11.04.2014; in: "Book of Abstracts",
(2014).
Zusätzliche Informationen
C.M. Koller, D. Holec, J. Ramm, S. Kolozsvári, J. Paulitsch, P.H. Mayrhofer:
"Challenges in Ab Initio Guided Design of Corundum Type (Al,Cr)2O3 Thin Films";
Vortrag: 2nd Austrian-Indian-Symposium on Materials Science and Tribology,
Wiener Neustadt;
26.05.2014
- 28.05.2014; in: "Book of Abstracts",
(2014).
Zusätzliche Informationen
C.M. Koller, D. Holec, J. Ramm, S. Kolozsvári, J. Paulitsch, P.H. Mayrhofer:
"Challenges in Ab Initio Guided Design of Corundum‐type (Al,Cr)2O3 Thin Films";
Vortrag: 41st International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego, CA;
28.04.2014
- 02.05.2014; in: "Book of Abstracts",
(2014).
Zusätzliche Informationen
C.M. Koller, D. Holec, J. Ramm, S. Kolozsvári, J. Paulitsch, P.H. Mayrhofer:
"Computational Materials Science of High Performance Industrially Utilised Oxide Coatings: (Al1-xCrx)2O3";
Poster: 3rd Vienna Scientific Cluster User Workshop,
Neusiedl am See;
24.02.2014
- 25.02.2014; in: "Book of Abstracts",
(2014).
Zusätzliche Informationen
C.M. Koller, D. Holec, J. Ramm, S. Kolozsvári, J. Paulitsch, P.H. Mayrhofer:
"Impact of Point Defects on Stability of (AlxCr1-x)2O3 Phases";
Poster: 41st International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego, CA;
28.04.2014
- 02.05.2014; in: "Book of Abstracts",
(2014).
Zusätzliche Informationen
C.M. Koller, R. Hollerweger, R. Rachbauer, P. Polcik, D. Holec, P.H. Mayrhofer:
"Increasing the thermo-mechanical properties of Ti-Al-N coatings by alloying Ta and modifying the coating architecture";
Vortrag: 7th International Conference on Surface Engineering,
Chengdu, China (eingeladen);
22.10.2016
- 25.10.2016; in: "Book of Abstracts",
(2016),
S. 13.
C.M. Koller, R. Hollerweger, R. Rachbauer, P. Polcik, J. Paulitsch, P.H. Mayrhofer:
"Increasing the thermo-mechanical properties of Ti-Al-N coatings by alloying Ta and modifying the coating architecture";
Vortrag: 16th Joint Vacuum Conference (JVC-16), the 14th European Vacuum Conference (EVC-14) and the 23th Croatian Slovenian International Scientific Meeting on Vacuum Science and Technique,
Portoroz;
06.06.2016
- 10.06.2016; in: "Book of Abstracts",
(2016),
S. 29.
C.M. Koller, R. Hollerweger, R. Rachbauer, P. Polcik, J. Paulitsch, P.H. Mayrhofer:
"Thermal stability and oxidation resistance of TiAlN/TaAlN multilayer coatings";
Poster: Plansee Seminar 2013,
Reutte;
03.06.2013
- 07.06.2013; in: "Proceedings of the 18th Plansee Seminar 2013",
(2013),
S. 2027
- 2040.
Zusätzliche Informationen
C.M. Koller, R. Hollerweger, R. Rachbauer, P. Polcik, J. Paulitsch, P.H. Mayrhofer:
"Thermal stability and oxidation resistance of TiAlN/TaAlN multilayer coatings";
Poster: International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2013,
San Diego;
29.04.2013
- 03.05.2013; in: "Book of Abstracts",
(2013),
S. 88.
Zusätzliche Informationen
C.M. Koller, A Kirnbauer, H. Bolvardi, P. Polcik, P.H. Mayrhofer:
"Increasing the thermo-mechanical properties of Ti-Al-N coatings by alloying Ta and modifying the coating architecture";
Vortrag: AVS 63rd Symposium & Exhibition,
Nashville, TN, USA;
06.11.2016
- 11.11.2016; in: "Book of Abstracts",
(2016),
S. 125.
C.M. Koller, A Kirnbauer, V. Dalbauer, R. Raab, S. Kolozsvári, J. Ramm, P.H. Mayrhofer:
"Challenges and Recent Progress in the Development of Arc Evaporated (Al1-xCrx)2O3";
Vortrag: 45h International Conference on Metallurgical Coatings and Thin FIlms,
San Diego (eingeladen);
22.04.2018
- 27.04.2018; in: "Book of Abstracts",
B4-2-3
(2018),
S. 85.
Zusätzliche Informationen
C.M. Koller, A Kirnbauer, B. Widrig, S. Kolozsvári, J. Ramm, P.H. Mayrhofer:
"On the phase evolution of Al-Cr intermetallics formed by cathodic arc evaporation";
Vortrag: 15th International Conference on Plasma Surface Engineering,
Garmisch-Partenkirchen;
12.09.2016
- 16.09.2016; in: "Book of Abstracts",
(2016),
S. 49.
C.M. Koller, R. Rachbauer, P. Polcik, F. Munnik, J. Paulitsch, P.H. Mayrhofer:
"Influence of B and Fe on the structure and morphology of arc evaporated (Al,Cr)2O3 thin films";
Vortrag: EMRS Spring Meeting 2013,
Straßbourg;
27.05.2013
- 31.05.2013; in: "Book of Abstracts",
(2013).
Zusätzliche Informationen
C.M. Koller, J. Ramm, S. Kolozsvári, M. Bartosik, J. Paulitsch, P.H. Mayrhofer:
"Impact of Fe on the Structural Evolution of Cathodic Arc Evaporated Al-Cr-O Coatings";
Vortrag: 14th International Conference on Plasma Surface Engineering,
Garmisch-Partenkirchen;
15.09.2014
- 19.09.2014; in: "Book of Abstracts",
(2014).
Zusätzliche Informationen
C.M. Koller, J. Ramm, S. Kolozsvári, J. Paulitsch, D. Holec, P.H. Mayrhofer:
"Initiierung von Phasenstrukturen in Al-Cr-basierten Oxiden durch Mikrostruktur- und Legierungskonzepte: Eine experimentelle und computergestützte Studie";
Vortrag: ASMET Forum für Metallurgie und Werkstofftechnik,
Montanuniversität Leoben;
10.05.2016
- 11.05.2016; in: "Book of Abstracts",
(2016),
S. 10.
C.M. Koller, J. Ramm, S. Kolozsvári, J. Paulitsch, P.H. Mayrhofer:
"Role of Droplets in the Phase Formation of Arc Evaporated (Al0.70Cr0.25Fe0.05)2O3 Coatings";
Vortrag: 42nd International Conference on Metallurgical Coatings and Thin Films,
San Diego;
20.04.2015
- 24.04.2015; in: "Book of Abstracts",
(2015),
S. 25.
Zusätzliche Informationen
C.M. Koller, J. Ramm, S. Kolozsvári, J. Paulitsch, P.H. Mayrhofer:
"Structure and Morphology of Cathodic Arc Evaporated (Cr,Al)2O3-based Multilayer Coatings";
Poster: 42nd International Conference on Metallurgical Coatings and Thin Films,
San Diego, CA;
20.04.2015
- 24.04.2015; in: "Book of Abstracts",
(2015),
S. 92.
Zusätzliche Informationen
C.M. Koller, H. Riedl, M. Bartosik, J. Ramm, S. Kolozsvári, P.H. Mayrhofer:
"The Influence of Fe-doping on Mechanical Properties and Thermal Stability of Arc Evaporated Al-Cr-O Coatings";
Vortrag: 43rd International Conference on Metallurgical Coatnigs and Thin Films,
San diego;
25.04.2016
- 29.04.2016; in: "Book of Abstracts",
(2016),
S. 49.
H. Lasfargues, T. Glechner, C.M. Koller, V. Paneta, D. Primetzhofer, S. Kolozsvári, D. Holec, H. Riedl, P.H. Mayrhofer:
"Thermal stability and mechanical properties of Ta1-xHfxCy coatings for ultra-high temperature applications";
Vortrag: 15th International Conference on Plasma Surface Engineering,
Garmisch-Partenkirchen;
12.09.2016
- 16.09.2016; in: "Book of Abstracts",
OR0905
(2016),
S. 69.
A. Limbeck, M. Weiss, H. Riedl, P.H. Mayrhofer:
"Development of laser based procedures for stoichiometry analysis of ternary boride thin films";
Vortrag: 2019 European Winter Conference on Plasma Spectrochemistry,
Pau, France;
03.02.2019
- 08.02.2019; in: "Programme",
(2019).
Zusätzliche Informationen
P.H. Mayrhofer:
"Advances in Design and Architecture of TM-Al-N Coatings for Severe Applications";
Vortrag: 41st International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego, CA (eingeladen);
28.04.2014
- 02.05.2014; in: "Book of abstracts",
(2014).
P.H. Mayrhofer:
"Advances in Ti-Al-N and other Nanocomposite Coatings for Severe Applications";
Vortrag: 13th International Ceramics Congress,
Montecatini (eingeladen);
18.06.2014
- 20.06.2014; in: "Book of Abstracts",
(2014).
P.H. Mayrhofer:
"Advances in Ti-Al-N and related Nanocomposite Coatings for Severe Applications";
Vortrag: 2nd ISTS (International Surface Treatment Symposium),
Istanbul (eingeladen);
25.06.2014
- 27.06.2014; in: "Book of Abstracts",
(2014).
P.H. Mayrhofer:
"Innovative Ceramic-Like Coatings for Tooling, Machining, Aerospace, Energy and Automotive Industry";
Vortrag: 37th International Conference and Exposition on Advanced Ceramics and Composites,
Daytona (eingeladen);
27.01.2013
- 01.02.2013; in: "Book of Abstracts",
(2013).
P.H. Mayrhofer:
"Innovative Hard Coatings for Machining and Wear Protection through Age Hardening and Improved Oxidation Resistance";
Hauptvortrag: Euro PM2013 Congress & Exhibition,
Gothenburg (eingeladen);
15.09.2013
- 18.09.2013; in: "Book of Abstracts",
(2013),
S. 65.
P.H. Mayrhofer:
"Innovative Materials Design for Improved Tribological Performance of Hard Coatings, ÖTG Symposium 2020";
Vortrag: ÖTG Symposium 2020,
Wr. Neustadt (eingeladen);
19.11.2020; in: "TRIBOLOGIE IN INDUSTRIE UND FORSCHUNG - Effizienter durch Kooperation",
(2020),
S. 01
- 02.
P.H. Mayrhofer:
"Microstructural Design and Architecture of Hard Coatings for Severe Applications: An Experimental and Ab Initio Study";
Hauptvortrag: 2nd Austrian-Indian-Symposium on Materials Science and Tribology,
Wiener Neustadt (eingeladen);
26.05.2014
- 29.05.2014; in: "Book of Abstracts",
(2014).
P.H. Mayrhofer:
"Nanostructured Multi-Component Thin Film";
Vortrag: XII International Conference on Nanostructured Materials (NANO 2014),
Moscow (eingeladen);
13.07.2014
- 18.07.2014; in: "Book of Abstracts",
(2014).
P.H. Mayrhofer:
"Physical Vapor Deposition";
Vortrag: Short Course on Hardmetals in Vienna organized by Euro PM,
Vienna (eingeladen);
09.04.2014
- 11.04.2014; in: "Book of Abstracts",
(2014).
P.H. Mayrhofer:
"Strategien für die Entwicklung harter, zäher und stabiler PVD-Hartstoffschichten für Schneidwerkzeuge";
Hauptvortrag: 37. Hagener Symposium mit Fachausstellung,
Hagen (eingeladen);
29.11.2018
- 30.11.2018; in: "Pulvermetallurgie - Neue Herausforderungen und neue Wege",
H. Danninger, L Sigl, Ch Broeckmann (Hrg.);
Heimdall Verlag,
Pulvermetallurgie in Wissenschaft und Praxis, Band 34
(2018),
ISBN: 978-3-946537-54-0;
S. 157
- 188.
P.H. Mayrhofer, D. Holec, M. Bartosik, J. Paulitsch, C. Sabitzer:
"Compositional, structural and mechanical evolution of reactively and non-reactively prepared Zr-Al-N thin films";
Vortrag: 14th International Conference on Plasma Surface Engineering,
Garmisch-Partenkirchen;
15.09.2014
- 19.09.2014; in: "Book of abstracts",
(2014).
P.H. Mayrhofer, D. Holec, F. Klimashin, N. Koutná:
"Nitrides and the Impact of Entropy on their Phase Stability";
Vortrag: 44th International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego;
24.04.2017
- 28.04.2017; in: "ICMCTF 2017",
(2017).
P.H. Mayrhofer, F. Klimashin, N. Koutná, H. Euchner, D. Holec:
"Vacancies as the Key to Excellent Properties Within Mo-Cr-N";
Vortrag: 43rd International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego (USA);
25.04.2016
- 29.04.2016; in: "ICMCTF 2016",
(2016),
S. 25.
Zusätzliche Informationen
P.H. Mayrhofer, D. Sonnleitner, J. Paulitsch, D. Holec:
"Structure, mechanical properties and thermal stability of non-reactively and reactively prepared Zr-Al-N hard coatings";
Vortrag: International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2013,
San Diego;
29.04.2013
- 03.05.2013; in: "Book of Abstracts",
(2013).
V. Moraes, H. Bolvardi, S. Kolozsvári, H. Riedl, P.H. Mayrhofer:
"Thermal stability and mechanical properties of Ti-Al-B-N thin films";
Vortrag: Plansee Seminar 2017,
Reutte;
29.05.2017
- 02.06.2017; in: "19th Plansee Seminar 2017",
Plansee Seminar 2017 Proceedings,
(2017),
Paper-Nr. HM 51,
11 S.
Zusätzliche Informationen
V. Moraes, D. Holec, H. Bolvardi, P. Polcik, H. Riedl, P.H. Mayrhofer:
"Ab initio inspired design of ternary boride thin films";
Vortrag: 45th International Conference on Metallurgical Coatings and Thin films,
San Diego;
18.04.2018
- 27.04.2018; in: "Conference Book",
(2018),
S. 50.
V. Moraes, H. Riedl, H. Bolvardi, S. Koloszvári, M. Ikeda, L. Prochaska, S. Paschen, P.H. Mayrhofer:
"Thermal Conductivity and Mechanical Properties of AlN-based Thin Films";
Vortrag: AVS 63rd Symposium & Exhibition,
Nashville, TN, USA;
06.11.2016
- 11.11.2016; in: "AVS 63rd International Symposium & Exhibition",
225304
(2016),
S. 1
- 10.
Zusätzliche Informationen
V. Moraes, H. Riedl, R. Rachbauer, S. Koloszvári, M. Ikeda, L. Prochaska, S. Paschen, P.H. Mayrhofer:
"Thermal conductivity of nitride based thin films";
Poster: 15th International Conference on Plasma Surface Engineering,
Garmisch-Partenkirchen;
12.09.2016
- 16.09.2016; in: "Fifteenth International Conference on Plasma Surface Engineering",
(2016),
S. 110.
Zusätzliche Informationen
V. Moraes, H. Riedl, R. Rachbauer, S. Kolozsvári, M. Ikeda, P.H. Mayrhofer:
"Thermal conductivity of nitride based thin films";
Vortrag: VSS Vienna Young Scientists Symposium 2015,
Wien;
25.06.2015
- 26.06.2015; in: "Book of Abstracts",
Book-of-abstracts.com,
(2015),
ISBN: 978-3-9504017-0-7;
S. 120
- 121.
J. Paulitsch, C.M. Koller, R. Rachbauer, J. Ramm, P. Polcik, D. Holec, P.H. Mayrhofer:
"Synthesis-structure-property relations of Al-oxide-based coatings";
Vortrag: 41st International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego, CA (eingeladen);
28.04.2014
- 02.05.2014; in: "Book of abstracts",
(2014).
Zusätzliche Informationen
J. Paulitsch, R. Rachbauer, J. Ramm, P. Polcik, P.H. Mayrhofer:
"Influence of Si on the arc evaporation behaviour of Al-Cr targets and structural evolution of (Al0.7Cr0.3)2O3 oxide coatings";
Vortrag: Plansee Seminar 2013,
Reutte;
03.06.2013
- 07.06.2013; in: "Book of Abstracts",
(2013).
J. Paulitsch, R. Rachbauer, J. Ramm, P. Polcik, P.H. Mayrhofer:
"Investigations of arc-evaporated (Al0.7Cr0.3)2O3 coatings from Al-Cr-Si and Al-Cr-Fe targets";
Vortrag: International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2013,
San Diego;
29.04.2013
- 03.05.2013; in: "Book of Abstracts",
(2013),
S. 12.
J. Paulitsch, M. Schlögl, J. Keckes, C. Kirchlechner, M.J. Cordill, P.H. Mayrhofer:
"In-situ studies on crack resistance of CrN-based hard coatings";
Vortrag: EUROMAT 2013,
Sevilla;
08.09.2013
- 13.09.2013; in: "Book of Abstracts",
(2013).
J. Paulitsch, M. Schlögl, C. Kirchlechner, M.J. Cordill, J. Keckes, P.H. Mayrhofer:
"Influence of the Cr to Al ratio on the mechanical properties and thermal stability of CrN-based/AlN multilayer coatings";
Vortrag: THERMEC 2013,
Las Vegas (eingeladen);
02.12.2013
- 06.12.2013; in: "Book of Abstracts Thermec 2013",
(2013).
R. Raab, S. Kolozsvári, R. Rachbauer, P.H. Mayrhofer:
"Influence of multilayer arrangement on structure and mechanical properties of arc evaporated oxide, nitride, and oxide/nitride coatings within the systems Al-Cr-N and Al-Cr-O";
Vortrag: 43rd International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego (USA);
25.04.2016
- 29.04.2016; in: "43rd ICMCTF International Conference on Metallurgical Coatings and Thin Films",
(2016),
S. 49.
Zusätzliche Informationen
R. Raab, C. Sabitzer, S. Kolozsvári, R. Rachbauer, P.H. Mayrhofer:
"MULTILAYER ARRENGEMENT OF OXIDE AND NITRIDE CAOTINGS WITHIN THE SYSTEM Al-Cr-N AND Al-Cr-O";
Vortrag: VSS Vienna Young Scientists Symposium 2015,
Wien;
25.06.2015
- 26.06.2015; in: "VSS Vienna Young Scientists Symposium",
Book-of-abstracts.com,
(2015),
ISBN: 978-3-9504017-0-7;
S. 150
- 151.
R. Rachbauer, D. Kurapov, M. Arndt, M. Bartosik, P.H. Mayrhofer:
"Impact of structure and morphology on thermal properties of AlTiN based hard coatings";
Vortrag: 14th International Conference on Plasma Surface Engineering,
Garmisch-Partenkirchen;
15.09.2014
- 19.09.2014; in: "Book of Abstracts",
(2014).
H. Riedl, M. Arndt, P. Polcik, P.H. Mayrhofer:
"Mechanical and tribological properties of arc evaporated Ti1-xAlxN/Mo1-x-ySixBy multilayer coatings";
Poster: 20th International Conference on Wear of Materials,
Toronto, Kanada;
12.04.2015
- 16.04.2015; in: "Book of Abstracts",
(2015).
Zusätzliche Informationen
H. Riedl, E. Aschauer, C.M. Koller, P. Polcik, M. Arndt, P.H. Mayrhofer:
"Ti-Al-N/Mo-Si-B multilayers: An architectural design for high temperature oxidation resistant hard coatings";
Vortrag: Plansee Seminar 2017,
Reutte;
29.05.2017
- 02.06.2017; in: "19th Plansee Seminar 2017",
Plansee Seminar 2017 Proceedings,
(2017),
Paper-Nr. RM 14,
14 S.
Zusätzliche Informationen
H. Riedl, R. Hollerweger, D. Holec, R. Rachbauer, P. Polcik, J. Paulitsch, P.H. Mayrhofer:
"Impact of Yttrium on mechanical properties, thermal stability and oxidation resistance of Ti-Al-N coatings";
Poster: Plansee Seminar 2013,
Reutte;
03.06.2013
- 07.06.2013; in: "Proceedings of the 18th Plansee Seminar 2013",
(2013),
S. 2014
- 2026.
Zusätzliche Informationen
H. Riedl, C.M. Koller, M. Bartosik, S. Kolozsvári, M. Arndt, A. Limbeck, P.H. Mayrhofer:
"Oxidation mechanism in Mo-Si-B/Ti-Al-N multilayer coatings";
Vortrag: 43rd International Conference on Metallurgical Coatnigs and Thin Films,
San Diego (USA);
25.04.2016
- 29.04.2016; in: "Book of Abstracts",
(2016),
S. 12.
H. Riedl, C.M. Koller, R. Rachbauer, S. Kolozsvári, F. Mendez Martin, P.H. Mayrhofer:
"Oxygen impurity related hardening mechanisms of Ti-Al-N thin films";
Poster: 14th International Conference on Plasma Surface Engineering,
Garmisch Partenkirchen;
15.09.2014
- 19.09.2014; in: "Book of Abstracts",
(2014),
S. 102.
Zusätzliche Informationen
H. Riedl, H. Lasfargues, S. Kolozsvári, A. Limbeck, D. Primetzhofer, P.H. Mayrhofer:
"Thermal stability and mechanical properties of Ta1-xHfxCy coatings for ultra-high temperature applications";
Vortrag: 16th Joint Vacuum Conference (JVC-16), the 14th European Vacuum Conference (EVC-14) and the 23th Croatian Slovenian International Scientific Meeting on Vacuum Science and Technique,
Portoroz;
06.06.2016
- 10.06.2016; in: "Book of abstracts",
(2016),
S. 117.
H. Riedl, V. Moraes, C. Fuger, H. Euchner, R Hahn, T. Wojcik, H. Bolvardi, P. Polcik, P.H. Mayrhofer:
"Synthesis of W1-xMxB2 based ternary diborides: Challenges and Possibilities";
Vortrag: 83rd IUVSTA Workshop,
Vadstena (eingeladen);
02.09.2018
- 06.09.2018; in: "Book of Abstract 83rd IUVSTA Workshop",
(2018),
S. 13.
Zusätzliche Informationen
H. Riedl, P. Polcik, M. Arndt, M. Sobiech, D. Holec, J. Paulitsch, P.H. Mayrhofer:
"Application oriented coating development for hot stamping processes: A combined first principles and experimental study";
Vortrag: EMRS Spring Meeting 2013,
Straßbourg;
27.05.2013
- 31.05.2013; in: "Book of Abstracts EMRS Spring Meeting 2013",
(2013).
Zusätzliche Informationen
H. Riedl, R. Rachbauer, S. Kolozsvári, P.H. Mayrhofer:
"Grain Size Induced Effects on the Decomposition Process of Ti-Al-N Thin Films";
Poster: 42nd International Conference on Metallurgical Coatings and Thin Films,
San Diego;
20.04.2015
- 24.04.2015; in: "Book of Abstracts",
(2015),
S. 97.
Zusätzliche Informationen
H. Riedl, A. Vieweg, R. Rachbauer, P. Polcik, P.H. Mayrhofer:
"High temperature oxidation behaviour and mechanical properties of PVD sputtered Mo-Si-B coatings";
Vortrag: 14th International Conference on Plasma Surface Engineering,
Garmisch-Partenkirchen;
15.09.2014
- 19.09.2014; in: "Book of Abstracts",
(2014),
S. 64.
Zusätzliche Informationen
H. Riedl, A Vlasova, R. Rachbauer, S. Kolozsvári, J. Paulitsch, P.H. Mayrhofer:
"Influence of oxygen impurities on structural, mechanical properties and age hardening of Ti-Al-N";
Vortrag: 41st International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego, CA;
28.04.2014
- 02.05.2014; in: "Book of Abstracts",
(2014),
S. 45.
Zusätzliche Informationen
H. Riedl, J. Zalesak, R. Rachbauer, P. Polcik, D. Holec, P.H. Mayrhofer:
"Ab initio studies on the Adsorption and Adhesive Transfer of Al and Fe to Nitride Coating Materials";
Poster: 3rd Vienna Scientific Cluster User Workshop,
Neusiedk am See;
24.02.2014
- 25.02.2014; in: "Book of Abstracts",
(2014).
Zusätzliche Informationen
H. Riedl, J. Zalesak, M. Sobiech, P. Polcik, D. Holec, P.H. Mayrhofer:
"Ab initio studies on the Adsorption and Adhesive Transfer of Al and Fe to Nitride Coating Materials";
Vortrag: 2nd Austrian-Indian-Symposium on Materials Science and Tribology,
Wiener Neustadt;
26.05.2014
- 28.05.2014; in: "Book of Abstracts",
(2014).
Zusätzliche Informationen
H. Riedl, J. Zalesak, M. Sobiech, P. Polcik, D. Holec, P.H. Mayrhofer:
"Ab initio studies on the Adsorption and Adhesive Transfer of Al and Fe to Nitride Coating Materials";
Poster: 41st International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego, CA;
28.04.2014
- 02.05.2014; in: "Book of Abstracts",
(2014),
S. 98.
Zusätzliche Informationen
H. Riedl, L. Zauner, Ph Ertelthaler, T. Wojcik, H. Bolvardi, S. Kolozsvári, P.H. Mayrhofer:
"Reactive HiPIMS deposition of Ti-Al-N: How to adjust the cubic to wurtzite transition";
Vortrag: 45th International Conference on Metallurgical Coatings and Thin Films (ICMCTF) 2018,
San Diego, CA;
23.04.2018
- 27.04.2018; in: "Abstract Book 45th ICMCTF 2018",
(2018),
S. 45.
Zusätzliche Informationen
C. Sabitzer, S. Kolozsvári, M. Arndt, R. Rachbauer, J. Paulitsch, P.H. Mayrhofer:
"Reactive and non-reactive deposition of Al-Cr-N coatings using metallic, intermetallic, and ceramic target material";
Poster: International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2014,
San Diego, CA, USA;
27.04.2014
- 02.05.2014; in: "Abstract Book ICMCTF 2014",
(2014),
1 S.
C. Sabitzer, J. Paulitsch, P. Polcik, M. Arndt, R. Rachbauer, P.H. Mayrhofer:
"Architectural design of Al-rich cubic coating materials within the AlN-CrN system";
Vortrag: International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2013,
San Diego;
29.04.2013
- 03.05.2013; in: "Book of Abstracts ICMCTF 2013",
(2013).
C. Sabitzer, J. Paulitsch, P. Polcik, M. Arndt, R. Rachbauer, P.H. Mayrhofer:
"Reactive and non-reactive sputter deposition of metallic, intermetallic and ceramic target materials to prepare Al-Cr-N coatings";
Poster: International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2013,
San Diego;
29.04.2013
- 03.05.2013; in: "Book of Abstracts ICMCTF 2013",
(2013).
C. Sabitzer, J. Paulitsch, P. Polcik, M. Arndt, R. Rachbauer, P.H. Mayrhofer:
"Reactive and non-reactive sputter deposition of metallic, intermetallic and ceramic target materials to prepare Al-Cr-N coatings";
Poster: Plansee Seminar 2013,
Reutte;
03.06.2013
- 07.06.2013; in: "Proceedings of the 18th Plansee Seminar 2013",
(2013),
S. 1998
- 2005.
C. Sabitzer, C. Steinkellner, P. Polcik, M. Arndt, R. Rachbauer, J. Paulitsch, P.H. Mayrhofer:
"Investigation on the diffusion behaviour of Fe, Cr, and C in arc evaporated TiN- and CrN-based coatings and their influence on the thermal and mechanical properties";
Vortrag: International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2014,
San Diego, CA, USA;
27.04.2014
- 02.05.2014; in: "Abstract Book ICMCTF 2014",
(2014),
1 S.
C. Sabitzer, C. Steinkellner, P. Polcik, M. Arndt, R. Rachbauer, J. Paulitsch, P.H. Mayrhofer:
"Investigation on the diffusion behaviour of Fe, Cr, and C in arc evaporated TiN- and CrN-based coatings and their influence on the thermal and mechanical properties";
Vortrag: 15th Joint Vacuum Conference,
Vienna;
15.06.2014
- 20.06.2014; in: "Book of Abstracts, JVC",
(2014),
1 S.
C. Sabitzer, C. Steinkellner, P. Polcik, M. Arndt, R. Rachbauer, J. Paulitsch, P.H. Mayrhofer:
"Investigation on the diffusion behaviour of Fe, Cr, and C in arc evaporated TiN- and CrN-based coatings and their influence on the thermal and mechanical properties";
Poster: 14th International Conference on Plasma Surface Engineering,
Garmisch-Partenkirchen;
15.09.2014
- 19.09.2014; in: "Book of Abstracts",
(2014),
1 S.
M. Schlögl, B. Mayer, J. Paulitsch, J. Keckes, C. Kirchlechner, P.H. Mayrhofer:
"Mechanical properties, fracture toughness, and thermal stability of CrN/AlN superlattice and multilayer thin films";
Vortrag: AVS 59th International Symposium,
Tampa;
28.10.2012
- 02.11.2012; in: "Book of Abstracts",
(2012).
Zusätzliche Informationen
M. Schlögl, J. Paulitsch, C. Kirchlechner, M.J. Cordill, J. Keckes, P.H. Mayrhofer:
"In-situ micro-fracture-test investigations on the influence of structure and phase transformation of CrN/AlN multilayer coatings";
Vortrag: International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2013,
San Diego;
29.04.2013
- 03.05.2013; in: "Book of Abstracts",
(2013).
W. Seidl, M. Bartosik, H. Bolvardi, S. Kolozsvári, P.H. Mayrhofer:
"Stress-Design in TiAlTaN/AlCrN Multilayer Coatings";
Vortrag: Stress 2016,
Chicago;
02.10.2016
- 05.10.2016; in: "Stress Evolution in Thin Films and Coatings: From Fundamental Understanding to Control",
(2016),
S. 20.
Zusätzliche Informationen
W. Seidl, S.A. Glatz, S. Kolozsvári, M. Arndt, P.H. Mayrhofer:
"Stress-Design in Multilayer Coatings - Architectural concepts and resulting properties";
Vortrag: AVS 62nd International Symposium & Exhibition,
San Jose, USA;
18.10.2015
- 23.10.2015; in: "Technical and Exhibitor Program",
(2015),
S. 5.
Zusätzliche Informationen
W. Seidl, S.A. Glatz, R. Rachbauer, M. Arndt, S. Kolozsvári, P.H. Mayrhofer:
"Structure, Mechanical and Thermal Properties of TiAlTaN/AlCrN-Multilayer Coatings";
Poster: Vienna Young Scientists Symposium (VSS) 2015,
Wien;
25.06.2015
- 26.06.2015; in: "Book of Abstract",
Book-of-Abstracts.com,
(2015),
ISBN: 978-3-9504017-0-7;
S. 160
- 161.
F. Seifried, H. Riedl, S. Baumgärtner, H. Leiste, R. Schwaiger, S. Ulrich, H. Seifert, P.H. Mayrhofer, M. Stüber:
"Magnetron Sputtering of Refractory Metal Thin Films on NiTi Shape Memory Alloy Sheets";
Vortrag: 45th International Conference on Metallurgical Coatings and Thin Films 2018,
San Diego, CA;
23.04.2018
- 27.04.2018; in: "Book of Abstracts 45th ICMCTF 2018",
(2018),
S. 12.
Zusätzliche Informationen
M. Weiss, C. Riedl, H. Riedl, J. Frank, P.H. Mayrhofer, J. Fleig, A. Limbeck:
"Online Laser Ablation of solids in Liquids (LASIL) as a versatile tool for quantitative thin film analysis";
Vortrag: AOFKA - Applied Surface and Solid State Analytics,
Freiberg;
06.10.2021
- 08.10.2021; in: "Scientific program - Abstracts",
(2021),
S. 27.
Zusätzliche Informationen
M. Weiss, H. Riedl, P.H. Mayrhofer, J. Fleig, A. Limbeck:
"Laser based elemental analysis of multilayer systems";
Vortrag: 20. Tagung Festkörperanalytik - 20th Conference on Solid State Analysis,
Wien;
01.07.2019
- 03.07.2019; in: "Abstracts",
(2019).
Zusätzliche Informationen
M. Weiss, H. Riedl, P.H. Mayrhofer, A. Limbeck:
"Determination of the stochiometric composition of ternary boride thin films via LA-ICP-MS and LIBS";
Vortrag: ANAKON 2019,
Münster, Germany;
25.03.2019
- 28.03.2019; in: "Programm",
(2019),
S. 100.
Zusätzliche Informationen
M. Weiss, H. Riedl, P.H. Mayrhofer, A. Limbeck:
"Quantification strategies for stoichiometry determination of thin films via LA‐ICP‐MS";
Poster: 30th MassSpec-Forum Vienna,
Vienna;
19.02.2019
- 20.02.2019; in: "Book of Abstracts",
(2019),
S. 54.
Zusätzliche Informationen
J. Zalesak, M. Bartosik, P.H. Mayrhofer, J. Keckes:
"Multi-Scale Mechanical Properties of Nanocrystalline Coatings Revealed by Micro- and Nano-Mechanical Tests";
Vortrag: 41st International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego, CA;
28.04.2014
- 02.05.2014; in: "Book of abstracts",
(2014).
Z. Zhang, R. Rachbauer, D. Holec, P.H. Mayrhofer:
"Impact of Al on structure and mechanical properties of NbN and TaN";
Vortrag: Plansee Seminar 2013,
Reutte;
03.06.2013
- 07.06.2013; in: "Book of Abstracts",
(2013).
L. Zhou, D. Holec, P.H. Mayrhofer:
"First-principles study of electronic, elastic and thermodynamic properties of CrN";
Vortrag: International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2013,
San Diego;
29.04.2013
- 03.05.2013; in: "Book of Abstracts",
(2013).
L. Zhou, D. Holec, P.H. Mayrhofer:
"Phase stability, structural and elastic properties of ternary Cr1-xTMxN: An ab-initio study";
Poster: International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2013,
San Diego;
29.04.2013
- 03.05.2013; in: "Book of Abstracts",
(2013).
Vorträge und Posterpräsentationen (ohne Tagungsband-Eintrag)
E. Aschauer, M. Bartosik, P. Polcik, M. Arndt, H. Riedl, P.H. Mayrhofer:
"Nano beam X-ray diffraction analysis of stress and strain in high-temperature oxidation resistant Ti1-xAlxN/Mo-Si-B multilayer coatings";
Vortrag: EUROMAT 2017,
THESSALONIKI;
17.09.2017
- 22.09.2017.
Zusätzliche Informationen
E. Aschauer, P. Felfer, M. Arndt, P. Polcik, H. Riedl, P.H. Mayrhofer:
"Oxygen Diffusion Pathways in High Temperature Oxidation Resistant Ti-Al-N/Mo-Si-B Multilayer Coating";
Vortrag: 45th International Conference on Metallurgical Coatings and Thin Films 2018,
San Diego;
23.04.2018
- 27.04.2018.
Zusätzliche Informationen
E. Aschauer, P. Felfer, H. Bolvardi, M. Arndt, P. Polcik, P.H. Mayrhofer, H. Riedl:
"Fundamental study of oxygen induced decomposition pathways in PVD deposited TiAlN/Mo-Si-B multilayer coatings";
Vortrag: EMRS Spring Meeting 2019,
Nizza;
27.05.2019
- 31.05.2019.
Zusätzliche Informationen
E. Aschauer, P. Felfer, C Macauley, M. Arndt, H. Bolvardi, P. Polcik, P.H. Mayrhofer, H. Riedl:
"Influence of Ti on the phase evolution of magnetron sputtered PVD deposited Mo-Si-B coatings";
Poster: EMRS Spring Meeting 2019,
Nizza;
27.05.2019
- 31.05.2019.
Zusätzliche Informationen
E. Aschauer, S. Sackl, M. Bartosik, T. Schachinger, M. Arndt, P. Polcik, H. Riedl, P.H. Mayrhofer:
"Atomic scale investigations of thermally treated MoSiB/TiAlN nano-multilayers";
Vortrag: Metallkunde Kolloquium Lech Arlberg,
Lech;
18.04.2017
- 21.04.2017.
E. Aschauer, S. Sackl, C.M. Koller, T. Schachinger, M. Arndt, P. Polcik, H. Riedl, P.H. Mayrhofer:
"Atomic scale investigations of thermally treated MoSiB/TiAlN nano-multilayers";
Vortrag: EMRS Spring Meeting 2017,
Straßburg;
22.05.2017
- 26.05.2017.
Zusätzliche Informationen
E. Aschauer, T. Wojcik, P. Polcik, O Hunold, M. Arndt, V. Dalbauer, P.H. Mayrhofer, P. Felfer, H. Riedl:
"Ultra high oxidation resistance of nano-structured thin films";
Poster: AVS 2020 International Twitter Poster Competition,
Online;
06.07.2020.
Zusätzliche Informationen
M. Bartosik, R Hahn, Z. Zhang, P.H. Mayrhofer:
"Micro-fracture experiments on nanocomposite hard coatings";
Poster: (17AN) Nanomechanical Testing VI,
Dubrovnik, Croatia;
01.10.2017
- 05.10.2017.
Zusätzliche Informationen
M. Bartosik, V. Moraes, H. Riedl, P.H. Mayrhofer:
"Thermo-mechanically optimized thin films";
Vortrag: Metallkunde Kolloquium Lech Arlberg,
Lech;
15.04.2015
- 17.04.2015.
Zusätzliche Informationen
M. Bartosik, J. Paulitsch, P.H. Mayrhofer:
"Synthesize-structure-properties Relations of AlN-based Protective coatings";
Vortrag: Materials Science & Technology 2014,
Pittsburgh, Pennsylvania USA (eingeladen);
12.10.2014
- 16.10.2014.
J. Buchinger, N. Koutná, Z. Chen, Z. Zhang, P.H. Mayrhofer, D. Holec, M. Bartosik:
"Toughness Enhanced Transition Metal Nitride Thin Films";
Vortrag: MSMF9,
Brno;
26.06.2019
- 28.06.2019.
Zusätzliche Informationen
J. Buchinger, N. Koutná, Z. Chen, Z. Zhang, P.H. Mayrhofer, D. Holec, M. Bartosik:
"Toughness Enhancement in Transition Metal Nitride Thin Film Superlattices";
Vortrag: Euromat 2019,
Stockholm;
01.09.2019
- 05.09.2019.
Zusätzliche Informationen
J. Buchinger, N. Koutná, P.H. Mayrhofer, D. Holec, M. Bartosik:
"TiN/WN Superlattice Coatings for Enhanced Toughness";
Poster: METAL 2018,
Brno;
23.05.2018
- 25.05.2018.
Zusätzliche Informationen
J. Buchinger, N. Koutná, P.H. Mayrhofer, D. Holec, M. Bartosik:
"Toughness Enhancement in Superlattice TiN/WN Coatings";
Vortrag: Materials Science and Engineering - MSE 2018,
Darmstadt;
26.09.2018
- 28.09.2018.
Zusätzliche Informationen
V. Dalbauer, A Kirnbauer, J. Ramm, S. Kolozsvári, C.M. Koller, P.H. Mayrhofer:
"Phase formation and oxidation behaviour of cathodic arc evaporated Al1-x-yCrxFe{y} and Al1-x-yCrxFe{y}Oδ thin films";
Vortrag: EUROMAT 2017,
THESSALONIKI;
17.09.2017
- 22.09.2017.
Zusätzliche Informationen
V. Dalbauer, J. Ramm, S. Kolozsvári, C.M. Koller, P.H. Mayrhofer:
"Phase formation and oxidation behaviour of cathodic arc evaporated AlxCr1-x and AlxCr1-xOδ thin films";
Poster: EMRS Spring Meeting 2017,
Straßburg;
22.05.2017
- 26.05.2017.
Zusätzliche Informationen
H. Euchner, P.H. Mayrhofer, J. Paulitsch:
"A computational approach to designing boron based coatings";
Vortrag: 41st International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego, CA;
28.04.2014
- 02.05.2014.
C. Fuger, R Hahn, T. Wojcik, O Hunold, P. Polcik, P. Felfer, P.H. Mayrhofer, H. Riedl:
"Ternary transition metal diborides - Next generation protective coating materials";
Hauptvortrag: 17th International Conference on Plasma Surface Engineering,
Erfurt, Deutschland (eingeladen);
07.09.2020
- 10.09.2020.
Zusätzliche Informationen
C. Fuger, V. Moraes, R Hahn, H. Bolvardi, P. Polcik, P.H. Mayrhofer, H. Riedl:
"Thermomechanical properties and oxidation resistance of ternary W1-xTaxB2-z coatings";
Vortrag: 47th International Conference on Metallurgical Coatings and Thin Films, ICMCTF,
San Diego (USA);
26.04.2021
- 30.04.2021.
Zusätzliche Informationen
C. Fuger, V. Moraes, R Hahn, H. Bolvardi, P. Polcik, H. Riedl, P.H. Mayrhofer:
"Influence of Ta on phase stability and mechanical properties of WB 2 thin films";
Vortrag: EMRS Spring Meeting 2019,
Nizza;
27.05.2019
- 31.05.2019.
Zusätzliche Informationen
C. Fuger, V. Moraes, R Hahn, O Hunold, M. Arndt, P. Polcik, P.H. Mayrhofer, H. Riedl:
"Thermomechanical Properties and Oxidation Resistance of Ternary W1-xTaxB2-z coatings";
Vortrag: ÖGV- Seminar 2021,
Wien;
24.09.2021.
Zusätzliche Informationen
C. Fuger, V. Moraes, R Hahn, P. Polcik, H. Bolvardi, H. Riedl, P.H. Mayrhofer:
"Influence of Ta on phase stability and mechanical properties of WB 2 thin films";
Vortrag: Vienna young Scientists Symposium VSS 2019,
Wien;
13.06.2019
- 14.06.2019.
Zusätzliche Informationen
C. Fuger, B Schwartz, T. Wojcik, V. Moraes, M. Weiss, A. Limbeck, C Macauley, O Hunold, P. Polcik, D. Primetzhofer, P. Felfer, P.H. Mayrhofer, H. Riedl:
"Oxidation resistance of Ta doped WB2-z coatings";
Poster: 17th International Conference on Plasma Surface Engineering,
Erfurt, Deutschland;
07.09.2020
- 10.09.2020.
Zusätzliche Informationen
C. Fuger, B Schwartz, T. Wojcik, V. Moraes, M. Weiss, C Macauley, O Hunold, P. Polcik, D. Primetzhofer, P. Felfer, P.H. Mayrhofer, H. Riedl:
"Influence of Ta on the oxidation resistance of WB2-z coatings";
Poster: AVS 2020 International Twitter Poster Competition,
Twitter;
06.07.2020.
S.A. Glatz, H. Bolvardi, S. Koloszvári, C.M. Koller, H. Riedl, P.H. Mayrhofer:
"Arc evaporated W-alloyed Ti-Al-N coatings for improved thermal stability, mechanical, and tribological properties";
Poster: Plansee Seminar 2017,
Reutte;
29.05.2017
- 02.06.2017.
S.A. Glatz, H. Bolvardi, S. Kolozsvári, C.M. Koller, H. Riedl, P.H. Mayrhofer:
"Arc evaporated Mo- and W-alloyed Ti-Al-N hard coatings for improved high temperature (wear) performance in (metal-) machining industry";
Vortrag: XI. Seminar for CE PhD Students in Materials Science,
TU Wien;
09.11.2017
- 10.11.2017.
S.A. Glatz, H. Bolvardi, S. Kolozsvári, C.M. Koller, H. Riedl, P.H. Mayrhofer:
"Arc evaporated W-alloyed Ti-Al-N coatings for improved thermal stability, mechanical, and tribological properties";
Poster: 44th International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego;
18.04.2017
- 23.04.2017.
T. Glechner, S. Fritze, E. Lewin, V. Paneta, D. Primetzhofer, S. Kolozsvári, D. Holec, P.H. Mayrhofer, H. Riedl:
"Novel ultra-high temperature Ta-C and Ta-C-N coatings: From ab initio calculations to PVD depositions";
Vortrag: 2017 MRS Fall Meeting,
Boston;
26.11.2017
- 01.12.2017.
Zusätzliche Informationen
T. Glechner, S. Fritze, E. Lewin, V. Paneta, D. Primetzhofer, S. Kolozsvári, D. Holec, P.H. Mayrhofer, H. Riedl:
"Novel ultra-high temperature Ta-C and Ta-C-N coatings: From ab initio calculations to PVD depositions";
Vortrag: 64. Metallkunde Kolloquium,
Lech am Arlberg;
18.04.2017
- 21.04.2017.
Zusätzliche Informationen
T. Glechner, R Hahn, D. Primetzhofer, H Zaid, S. Kodambaka, D. Holec, P.H. Mayrhofer, S. Kolozsvári, J. Ramm, H. Riedl:
"Tuning fracture characteristics of superhard TM carbide coatings by nitrogen alloying";
Vortrag: 47th International Conference on Metallurgical Coatings and Thin Films, ICMCTF,
San Diego;
26.04.2021
- 30.04.2021.
Zusätzliche Informationen
T. Glechner, A Kirnbauer, C. Tomastik, E. Badisch, P. Polcik, P.H. Mayrhofer, H. Riedl:
"Controlling structure and morphology of WC based thin films";
Poster: 17th International Conference on Plasma Surface Engineering,
Erfurt, Deutschland;
07.09.2020
- 10.09.2020.
Zusätzliche Informationen
T. Glechner, P.H. Mayrhofer, R Hahn, T. Wojcik, D. Holec, S. Fritze, D. Primetzhofer, H. Bolvardi, S. Kolozsvári, H Zaid, S. Kodambaka, H. Riedl:
"Tuning structure and mechanical properties of Ta-C coatings by N-alloying and vacancy population";
Vortrag: EMRS Spring Meeting 2019,
Nizza;
27.05.2019
- 31.05.2019.
Zusätzliche Informationen
T. Glechner, P.H. Mayrhofer, R Hahn, T. Wojcik, D. Holec, S. Fritze, D. Primetzhofer, H. Bolvardi, S. Kolozsvári, H Zaid, S. Kodambaka, H. Riedl:
"Tuning structure and mechanical properties of Ta-C coatings by N-alloying and vacancy population";
Poster: Vienna young Scientists Symposium VSS 2019,
Wien;
13.06.2019
- 14.06.2019.
Zusätzliche Informationen
R Hahn, M. Bartosik, M. Arndt, P. Polcik, P.H. Mayrhofer:
"Annealing Effect on the Fracture Toughness of CrN/TiN Superlattice Systems";
Poster: (17AN) Nanomechanical Testing VI,
Dubrovnik, Croatia;
01.10.2017
- 06.10.2017.
Zusätzliche Informationen
R Hahn, M. Bartosik, S. Koloszvári, H. Bolvardi, P.H. Mayrhofer:
"Fracture toughness enhancement of epitaxially grown CrN/TiN superlattice thin films";
Vortrag: 2017 MRS Fall Meeting,
Boston;
26.11.2017
- 01.12.2017.
Zusätzliche Informationen
R Hahn, M. Bartosik, P.H. Mayrhofer:
"Superlattice effect for enhanced Fracture Toughness of Hard Coatings and its Intrinsic Origins";
Vortrag: XI. Seminar for CE PhD Students in Materials Science,
Wien;
09.11.2017
- 10.11.2017.
Zusätzliche Informationen
R Hahn, M. Bartosik, H. Riedl, H. Bolvardi, S. Kolozsvári, P.H. Mayrhofer:
"Fracture toughness enhancement in superlattice hard coatings";
Vortrag: 46th International Conference on Metallurgical Coatings and Thin Films,
San Diego;
19.05.2019
- 24.05.2019.
Zusätzliche Informationen
R Hahn, C. Fuger, G Habler, H. Bolvardi, P. Polcik, P.H. Mayrhofer, H. Riedl:
"Fracture-Microstructure Relations of W-diboride Thin Films";
Vortrag: 47th International Conference on Metallurgical Coatings and Thin Films, ICMCTF,
San Diego, CA, USA;
26.04.2021
- 30.04.2021.
Zusätzliche Informationen
R Hahn, C. Fuger, G Habler, H. Bolvardi, P. Polcik, P.H. Mayrhofer, H. Riedl:
"Influence of the microstructure on the fracture characteristics of WB2-z based thin films";
als Vortrag angenommen für: Materials Science Colloquium,
Lech;
19.04.2020
- 22.04.2020.
Zusätzliche Informationen
R Hahn, C. Fuger, V. Moraes, H. Bolvardi, P. Polcik, P.H. Mayrhofer, H. Riedl:
"Influence of alloying elements on the mechanical properties, especially fracture toughness, of the WB2-z base system";
Poster: Nanomechanical Testing In Materials Research And Development Vii,
Malaga;
29.09.2019
- 04.10.2019.
Zusätzliche Informationen
R Hahn, C. Fuger, V. Moraes, O Hunold, P. Polcik, P.H. Mayrhofer, H. Riedl:
"Influence of alloying elements on the mechanical properties of the WB2-z base system";
Poster: AVS 2020 International Twitter Poster Competition,
Twitter Poster Competition;
06.07.2020.
Zusätzliche Informationen
D. Holec, M. Friak, Z. Zhang, M. Bartosik, P.H. Mayrhofer:
"Mechanical and structural properties of CrN/AlN superlattices";
Poster: 44th International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego;
18.04.2017
- 23.04.2017.
D. Holec, J. Keckes, P.H. Mayrhofer:
"Impact of a thin film texture on mechanical properties";
Vortrag: MSE 2014,
Darmstadt;
23.09.2014
- 25.09.2014.
A Kirnbauer, S. Kagerer, P. Polcik, P.H. Mayrhofer:
"Improved Ti-Al-Ta-N coatings by doping with LaB6 and CeSi2";
Vortrag: 47th International Conference on Metallurgical Coatings and Thin Films, ICMCTF,
San Diego;
26.04.2021
- 30.04.2021.
Zusätzliche Informationen
A Kirnbauer, C. Koller, S. Kolozsvári, P.H. Mayrhofer:
"Multielement rutile-structured AlCrNbTaTi-oxide coatings synthesised by reactive magnetron sputtering";
Poster: 46th International Conference on Metallurgical Coatings and Thin Films,
San Diego;
19.05.2019
- 24.05.2019.
Zusätzliche Informationen
A Kirnbauer, C. Koller, P. Polcik, P.H. Mayrhofer:
"Structure, mechanical properties and thermal stability of magnetron sputtered HfTaVWZr high-entropy boride coatings";
Vortrag: 46th International Conference on Metallurgical Coatings and Thin Films,
San Diego;
19.05.2019
- 24.05.2019.
Zusätzliche Informationen
A Kirnbauer, C.M. Koller, S. Koloszvári, P.H. Mayrhofer:
"Structure, mechanical properties and thermal stability of reactively sputtered AlTaTiVZr high-entropy nitride coatings";
Vortrag: 16th International Conference on Plasma Surface Engineering,
Garmisch;
17.09.2018.
Zusätzliche Informationen
A Kirnbauer, C.M. Koller, S. Koloszvári, P.H. Mayrhofer:
"Thermal stability of reactively sputtered HfTaTiVZr high-entropy nitride coatings";
Vortrag: Spring Meeting of the European Materials Research Society 2018,
Strasbourg;
18.06.2018
- 22.06.2018.
Zusätzliche Informationen
A Kirnbauer, A. Kretschmer, C.M. Koller, T. Wojcik, M. Hans, J.M. Schneider, P. Polcik, P.H. Mayrhofer:
"Mechanical properties and thermal stability of reactively sputtered multicomponent Hf-Ta-Ti-V-Zr nitrides";
Hauptvortrag: 17th International Conference on Plasma Surface Engineering,
Erfurt, Deutschland;
07.09.2020
- 10.09.2020.
Zusätzliche Informationen
A Kirnbauer, P.H. Mayrhofer:
"High-entropy ceramic thin films synthesized by magnetron sputtering";
Vortrag: Materials Research Society- Fall Meeting 2019 (MRS 2019),
Boston, MA, USA;
01.12.2019
- 06.12.2019.
Zusätzliche Informationen
A Kirnbauer, P. Polcik, P.H. Mayrhofer:
"Phase formation and thermal stability of reactively and non-reactively sputtered high-entropy metal-sublattice carbides";
Hauptvortrag: AVS 67 Virtual Symposium,
Charlotte, NC, USA;
25.10.2021
- 28.10.2021.
Zusätzliche Informationen
F. Klimashin, H. Euchner, D. Holec, P.H. Mayrhofer:
"Supersaturated intermetallic phases within the ternary Mo-Cr-N system";
Vortrag: Intermetallics 2015,
Bad Staffelstein;
28.09.2015
- 02.10.2015.
F. Klimashin, H. Euchner, P.H. Mayrhofer:
"Composition driven phase evolution and mechanical properties of sputtered Mo-Al-N hard coatings";
Poster: 42nd International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego (USA);
20.04.2015
- 24.04.2015.
Zusätzliche Informationen
F. Klimashin, H. Euchner, P.H. Mayrhofer:
"Composition driven phase evolution in Mo-Cr-N and Mo-Al-N hard coatings";
Vortrag: Oorgandagarna,
Visby, Schweden;
15.06.2015
- 17.06.2015.
Zusätzliche Informationen
F. Klimashin, H. Euchner, P.H. Mayrhofer:
"Experimental and computational studies on Mo-N";
Vortrag: TACT 2015,
Tainan;
15.11.2015
- 18.11.2015.
Zusätzliche Informationen
F. Klimashin, H. Euchner, P.H. Mayrhofer:
"Phase evolution, microstructure, and mechanical properties of Mo-Cr-N hard coatings";
Vortrag: Vienna Young Scientists Symposium (VSS) 2015,
Wien;
25.06.2015
- 26.06.2015.
Zusätzliche Informationen
F. Klimashin, H. Euchner, P.H. Mayrhofer:
"Structure and mechanical properties of Mo-Cr-N hard coatings";
Vortrag: 42nd International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego (USA);
20.04.2015
- 24.04.2015.
Zusätzliche Informationen
F. Klimashin, N. Koutná, L. Lobmaier, D. Holec, P.H. Mayrhofer:
"Tuning the hardness-toughness relationship by combining MoN with TaN";
Vortrag: 46th International Conference on Metallurgical Coatings and Thin Films,
San Diego, CA, USA;
20.05.2019
- 24.05.2019.
F. Klimashin, P.H. Mayrhofer:
"The Role of Vacancies in the W-N System";
Poster: 46th International Conference on Metallurgical Coatings and Thin Films,
San Diego (USA);
20.05.2019
- 24.05.2019.
B. Kohlhauser, H. Riedl, M. Ripoll Rodríguez, C. Gachot, P.H. Mayrhofer:
"In-situ solid lubricant formation on W or Mo based carbide and nitride coatings in lubricated tribo contacts";
Vortrag: Spring Meeting of the European Materials Research Society 2018,
Strasbourg;
18.06.2018
- 22.06.2018.
Zusätzliche Informationen
B. Kohlhauser, H. Riedl, M. Ripoll Rodríguez, P.H. Mayrhofer:
"Influence of EP Additive Containing Lubricants on the in-situ Formation of Low Friction Tribofilms on Tungsten Based Coatings";
Poster: 44th International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego;
18.04.2017
- 23.04.2017.
B. Kohlhauser, M. Ripoll, H. Riedl, C.M. Koller, N. Koutná, G Ramirez, A. Erdemir, C. Gachot, P.H. Mayrhofer:
"On the In-situ Formation of Transition Metal Disulphides in Lubricated WN or WC Coating Contacts";
Vortrag: 46th International Conference on Metallurgical Coatings and Thin Films,
San Diego;
19.05.2019
- 24.05.2019.
Zusätzliche Informationen
B. Kohlhauser, M. Ripoll Rodríguez, H. Riedl, C. Gachot, P.H. Mayrhofer:
"Interaction of EP additives with W or Mo based carbide and nitride coatings and their in-situ related formation of a low friction tribofilm.";
Vortrag: 6th World Tribology Congress WTC,
Beijing, China;
17.09.2017
- 23.09.2017.
B. Kohlhauser, M. Ripoll Rodríguez, H. Riedl, C. Gachot, G Ramirez, A. Erdemir, P.H. Mayrhofer:
"Generation of a low friction tribofilm on Mo- and W-containing surfaces and coatings";
Vortrag: The 7th International Conference on the Internet of Things (IoT 2017),
Linz, Austria;
22.10.2017
- 25.10.2017.
B. Kohlhauser, M. Ripoll Rodríguez, H. Riedl, D. Primetzhofer, A. Erdemir, P.H. Mayrhofer:
"Phase evolution and triblogical properties of molybdenum- and tungsten carbide coatings";
Poster: 16th International Conference on Plasma Surface Engineering,
Garmisch;
17.09.2018.
C.M. Koller, D. Holec, S. Kolozsvári, J. Paulitsch, P.H. Mayrhofer:
"Addressing Phase Stability of Physical Vapour Deposited (Al,Cr,X)2O3 Coatings by Density Functional Theory";
Vortrag: 2nd German-Austrian Workshop on Computational Materials Science,
Kirchdorf i. Tirol;
19.01.2015
- 23.01.2015.
Zusätzliche Informationen
C.M. Koller, J. Ramm, S. Kolozsvári, J. Paulitsch, P.H. Mayrhofer:
"Structure and Morphology of Cathodic Arc Evaporated (Cr,Al)2O3-based Multilayer Coatings";
Poster: 11. Gefüge und Bruch Tagung,
Leoben;
08.04.2015
- 10.04.2015.
Zusätzliche Informationen
N. Koutná, P. Řehák, Z. Zhang, M. Černý, M. Bartosik, M. Friak, M. Sob, P.H. Mayrhofer, D. Holec:
"Peculiar oscillations in nano-scale AlN/TiN and other nitride-based superlattices";
Vortrag: 46th International Conference on Metallurgical Coatings and Thin Films,
San Diego;
19.05.2019
- 24.05.2019.
N. Koutná, J. Buchinger, R Hahn, J. Zálesák, M. Bartosik, M. Friak, M. Sob, D. Holec, P.H. Mayrhofer:
"Probing defected layers of MoN/TaN and TiN/WN superlattices";
Poster: 46th International Conference on Metallurgical Coatings and Thin Films,
San Diego;
19.05.2019
- 24.05.2019.
N. Koutná, R Hahn, J. Buchinger, M. Friak, M. Bartosik, M. Sob, P.H. Mayrhofer, D. Holec:
"Understanding relationship between structural and mechanical properties of metastable superlattices";
Vortrag: MSMF9,
Brno;
26.06.2019
- 28.06.2019.
N. Koutná, R Hahn, J. Buchinger, J. Zálesák, J. Keckes, M. Bartosik, M. Friak, D. Holec, P.H. Mayrhofer:
"Vacancies as a key mechanism for tuning thermodynamic stability and mechanical properties of nitride-based superlattices";
Vortrag: Materials Science and Engineering - MSE 2018,
Darmstadt;
26.09.2018
- 28.09.2018.
N. Koutná, D. Holec, R Hahn, M. Friak, P.H. Mayrhofer:
"Vacancies-driven energetics and elasticity of MoN/TaN superlattices";
Poster: ViCoM,
Vienna;
04.04.2018
- 06.04.2018.
Zusätzliche Informationen
N. Koutná, S. Zöhrer, P. Erdely, R. Franz, Y. Du, P.H. Mayrhofer, D. Holec:
"Experimental chemistry and structural stability of AlNb 3 clarified by a formation of ordered antisite defects";
Vortrag: Euromat 2019,
Stockholm;
01.09.2019
- 05.09.2019.
A. Kretschmer, V. Moraes, D. Primetzhofer, K. Yalamanchili, H. Rudigier, P.H. Mayrhofer:
"Improving phase stability, hardness and oxidation resistance of reactive magnetron sputtered (AlvCrwNbxTayTiz)N thin films by Si-alloying";
Vortrag: 17th International Conference on Plasma Surface Engineering,
Erfurt, Deutschland;
07.09.2020
- 10.09.2020.
Zusätzliche Informationen
H. Lasfargues, T. Glechner, C.M. Koller, V. Paneta, D. Primetzhofer, S. Koloszvári, D. Holec, H. Riedl, P.H. Mayrhofer:
"Non-reactively Sputtered Ultra-High Temperature Hf-C and Ta-C Coatings";
Vortrag: 44th International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego (USA);
23.04.2017
- 28.04.2017.
L. Lederová, A. Orendáčová, R. Tarasenko, M. Bartosik, V. Tkáč, P.H. Mayrhofer, M. Orendáč, V. Sechovský, A. Feher:
"Thermodynamic properties of the two-dimensional quantum magnet Cu(tn)Cl2";
Vortrag: The 21st International Conference on Solid Compound of Transition Elements,
Vienna;
25.03.2018
- 29.03.2018.
Zusätzliche Informationen
L. Löfler, D. Holec, M. Bartosik, P.H. Mayrhofer:
"Mechanical properties of CrN/TiN superlattices from ab initio calculations";
Poster: Materials Science and Engineering - MSE 2018,
Darmstadt;
26.09.2018
- 28.09.2018.
L. Löfler, D. Holec, P.H. Mayrhofer:
"Multi-method study of (semi-) coherent stabilisation of alumina on Al-Cr droplets";
Poster: ViCoM,
Wien;
04.04.2018
- 06.04.2018.
P.H. Mayrhofer:
"Atomistic Guided Development of Hard Coatings for Severe Applications";
Vortrag: AVS 62nd International Symposium,
San Jose (eingeladen);
18.10.2015
- 23.10.2015.
P.H. Mayrhofer:
"Atomistic Guided Development of Hard Thin Films for Severe Applications";
Hauptvortrag: TACT 2015,
Tainan (eingeladen);
15.11.2015
- 18.11.2015.
P.H. Mayrhofer:
"Impact of alloying and interfaces on fracture toughness of transition metal nitrides and borides";
Hauptvortrag: Euromat 2019,
Stockholm (eingeladen);
01.09.2019
- 05.09.2019.
P.H. Mayrhofer:
"Impact of alloying and interfaces on fracture toughness of transition metal nitrides and borides";
Hauptvortrag: TMS 2019,
San Antonio (USA) (eingeladen);
11.03.2019
- 15.03.2019.
P.H. Mayrhofer:
"Impact of alloying and interfaces on fracture toughness of transition metal nitrides and borides";
Hauptvortrag: International Conference from Nanoparticles and Nano-materials to Nanodevices and Nanosystems, 6th IC4N,
Corfu (eingeladen);
30.06.2019
- 03.07.2019.
P.H. Mayrhofer:
"Innovative Materials Design for Improved Tribological Performance of Hard Coatings";
Hauptvortrag: New Challenges in Tribology, IET Birmingham,
Birmingham (eingeladen);
14.03.2018
- 15.03.2018.
P.H. Mayrhofer:
"Interface and interphase controlled properties of transition metal borides: The beauty of imperfections";
Hauptvortrag: 83rd IUVSTA Workshop,
Vadstena (eingeladen);
02.09.2018
- 06.09.2018.
P.H. Mayrhofer:
"Interface and interphase controlled properties of transition metal borides: The BEAUTY of IMPERFECTIONS";
Vortrag: 64. Metallkunde Kolloquium,
Lech am Arlberg;
09.04.2018
- 11.04.2018.
P.H. Mayrhofer:
"Materials Design Guidelines for improved Strength, Ductility, and Stability";
Hauptvortrag: 45th International Conference on Metallurgical Coatings and Thin Films (ICMCTF) 2018,
San Diego, CA (eingeladen);
23.04.2018
- 27.04.2018.
P.H. Mayrhofer:
"Microstructural Design and Architecture of Hard Coatings for Severe Applications: An Experimental and Ab Initio Study";
Hauptvortrag: Solids4Fun,
Wien (eingeladen);
15.11.2013.
P.H. Mayrhofer:
"Microstructural Design and Architecture of Hard Coatings for Severe Applications: An Experimental and Ab Initio Study";
Hauptvortrag: TU Bergakademie Freiberg,
TU Bergakademie Freiberg;
30.06.2014.
P.H. Mayrhofer:
"Protective TM-Al-N Coatings";
Vortrag: Workshop on Protective TM-Al-N Coatings,
Werkstoffchemie, RWTH Aachen, Aachen, Deutschland (eingeladen);
04.12.2012.
Zusätzliche Informationen
P.H. Mayrhofer:
"PVD Coatings: Yesterday, Today, Tomorrow";
Hauptvortrag: Technology Briefing "Innovative, funktionelle Beschichtungen",
Thun, Swiss (eingeladen);
14.11.2018.
P.H. Mayrhofer:
"Quantum Chemistry guided Materials Design Concepts for improved Strength, Ductility, and Stability of Thin Films";
Hauptvortrag: Plasma diagnostics & modelling, towards the industrial applications of plasma-based processes (EFDS workshop),
Mons (eingeladen);
07.02.2018
- 08.02.2018.
P.H. Mayrhofer:
"Spinodal Decomposition of TM-Al-N and Precipitation of AlN";
Vortrag: ILSB Seminar,
Wien (eingeladen);
13.06.2013.
P.H. Mayrhofer:
"Strategies for developing hard coatings for demanding application";
Hauptvortrag: 14th International Ceramics Congress, CIMTEC 2018,
Perugia (eingeladen);
04.06.2018
- 08.06.2018.
P.H. Mayrhofer:
"Strategies for developing strong, tough and stable hard materials, a case study on hard coatings";
Hauptvortrag: 13th International Conference on Solid State Chemistry,
Pardubice (eingeladen);
16.09.2018
- 21.09.2018.
P.H. Mayrhofer, J. Buchinger, C. Fuger, R Hahn, A Kirnbauer, H. Asanuma:
"Progress in developing robust ceramic thin film materials";
Vortrag: VEBLEO Webinar on Materials Science, Engineering and Technology,
Webinar (eingeladen);
17.11.2020
- 20.11.2020.
P.H. Mayrhofer, D. Holec:
"Impact of Al on structure and mechanical properties of NbN and TaN";
Vortrag: 42nd International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego (USA);
20.04.2015
- 24.04.2015.
P.H. Mayrhofer, F. Klimashin, N. Koutná, L. Lobmaier, D. Holec:
"The MoN-TaN system: Coatings for increased performance by tuning their vacancy configuration";
Vortrag: 65. Metallkunde-Kolloquium,
Lech;
24.04.2019
- 26.04.2019.
P.H. Mayrhofer, H Marihart, C.M. Koller, D. Holec:
"Designing the structure and mechanical properties of TaN; An experimental and ab initio study";
Vortrag: 61. Metallkunde-Kolloquium,
Lech am Arlberg;
15.04.2015
- 17.04.2015.
V. Moraes, C. Fuger, R Hahn, T. Wojcik, M. Arndt, P. Polcik, P.H. Mayrhofer, H. Riedl:
"Ternary diboride based thin films from scratch: Is WB2-z a proper base system for future concepts?";
Vortrag: 65. Metallkunde-Kolloquium,
Lech;
24.04.2019
- 26.04.2019.
Zusätzliche Informationen
V. Moraes, C. Fuger, L. Zauner, R Hahn, H. Bolvardi, P. Polcik, H. Riedl, P.H. Mayrhofer:
"Transition Metal Diborides: Combining Computational And Experimental Materials Science";
Hauptvortrag: International Conference On Mining, Material, And Metallurgical Engineering,
Lisbon;
15.08.2019
- 17.08.2019.
Zusätzliche Informationen
V. Moraes, C. Fuger, L. Zauner, R Hahn, D. Primetzhofer, P. Polcik, H. Riedl, P.H. Mayrhofer:
"2020 ASED Awards Ceremony";
Vortrag: 2020 ASED Awards Ceremony,
Online;
14.12.2020
- 16.12.2020.
Zusätzliche Informationen
V. Moraes, R Hahn, M. Bartosik, H. Riedl, H. Euchner, D. Holec, P.H. Mayrhofer:
"Ab initio guided development of ternary borides: A case study of Ti-B-N, Ti-Zr-B, Ti-W-B, Ta-W-B, and V-W-B systems";
Vortrag: AVS 65th International Symposium,
Long Beach;
21.10.2018
- 26.10.2018.
V. Moraes, D. Holec, H. Bolvardi, P. Polcik, H. Riedl, P.H. Mayrhofer:
"Designing novel boride materials from scratch";
Vortrag: 2017 MRS Fall Meeting,
Boston;
26.11.2017
- 01.12.2017.
Zusätzliche Informationen
V. Nedelkovski, O.G. Andriotis, R Hahn, P.H. Mayrhofer, P.J. Thurner:
"AFM-based microbeam bending of human cortical bone lamellae from the femur midshaft";
Vortrag: 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019),
Vienna;
18.02.2019
- 22.02.2019.
Zusätzliche Informationen
R. Raab, S. Kolozsvári, R. Rachbauer, P.H. Mayrhofer:
"Influence of multilayer arrangement on structure and mechanical properties of arc evaporated oxide, nitride, and oxide/nitride coatings within the systems Al-Cr-N and Al-Cr-O";
Poster: 15th International Conference on Plasma Surface Engineering,
Garmisch-Partenkirchen;
12.09.2016
- 16.09.2016.
Zusätzliche Informationen
R. Raab, C. Sabitzer, S. Kolozsvári, R. Rachbauer, P.H. Mayrhofer:
"Architectural design of oxide and nitride coatings within the system Al-Cr-N and Al-Cr-O";
Poster: 11. Gefüge und Bruch Tagung,
Leoben;
08.04.2015
- 10.04.2015.
H. Riedl, T. Glechner, N. Koutná, T. Wojcik, S. Kolozsvári, D. Holec, P. Felfer, P.H. Mayrhofer:
"How to improve the oxidation resistance of ultra-high temperature Ta-C coatings: An ab initio guided approach";
Vortrag: 14th International Ceramic Congress,
Perugia;
04.06.2018
- 08.06.2018.
Zusätzliche Informationen
H. Riedl, T. Glechner, N. Koutná, T. Wojcik, S. Kolozsvári, D. Holec, P. Felfer, P.H. Mayrhofer:
"Oxidation behavior of superhard Ta-X-C coatings: An ab initio guided approach";
Poster: 16th International Conference on Plasma Surface Engineering,
Garmisch-Partenkirchen;
12.09.2016
- 16.09.2016.
Zusätzliche Informationen
H. Riedl, S. Kagerer, L. Zauner, T. Wojcik, S. Kolozsvári, J Capek, T Kozák, P Zeman, P.H. Mayrhofer:
"Influence of transition metal dopants on the reactive HiPIMS deposition of γ-Al2O3 thin films";
Vortrag: PLATHINIUM (Plasma Thin film International Union Meeting),
Antibes;
13.09.2019
- 17.09.2019.
Zusätzliche Informationen
H. Riedl, B. Kohlhauser, V. Paneta, C.M. Koller, S. Kolozsvári, D. Primetzhofer, P.H. Mayrhofer:
"Influence of Transition Metal Dopants on Target Poisoning and Oxidation Mechanism of Reactively Sputtered γ-Al2O3 Thin Films";
Vortrag: AVS 63rd Symposium & Exhibition,
Nashville, TN, USA;
06.11.2016
- 11.11.2016.
H. Riedl, C.M. Koller, M. Bartosik, S. Kolozsvári, M. Arndt, A. Limbeck, P.H. Mayrhofer:
"Oxidation mechanism in Mo-Si-B/Ti-Al-N multilayer coatings";
Vortrag: 62. Metallkunde Kolloquium,
Lech am Arlberg;
11.04.2016
- 13.04.2016.
H. Riedl, C.M. Koller, S.A. Glatz, J Kalas, P. Polcik, P.H. Mayrhofer:
"Mechanical and tribological properties of arc evaporated Ti(1-x)Al(x)N/Mo(1-x-y)Si(x)B(y) multilayer coatings";
Vortrag: 42nd International Conference on Metallurgical Coatings and Thin Films,
San Diego;
20.04.2015
- 24.04.2015.
Zusätzliche Informationen
H. Riedl, C.M. Koller, S.A. Glatz, J Kalas, P. Polcik, P.H. Mayrhofer:
"Mechanical and tribological properties of arc evaporated Ti1-xAlxN/Mo1-x-ySixBy multilayer coatings";
Vortrag: Symposium 2015 der Österreichischen Tribologischen Gesellschaft (ÖTG),
Wiener Neustadt;
23.11.2015
- 25.11.2015.
H. Riedl, H. Lasfargues, T. Glechner, V. Paneta, D. Primetzhofer, S. Kolozsvári, D. Holec, P.H. Mayrhofer:
"Non-reactively sputtered ultra-high temperature Ta-C coatings";
Vortrag: EUROMAT 2017,
THESSALONIKI;
17.09.2017
- 22.09.2017.
Zusätzliche Informationen
H. Riedl, V. Moraes, C. Fuger, H. Euchner, R Hahn, T. Wojcik, M. Arndt, P. Polcik, P.H. Mayrhofer:
"Is WB2-z a proper Base System for designing Ternary Diboride based Thin Films?";
Vortrag: 46th International Conference on Metallurgical Coatings and Thin Films,
San Diego;
19.05.2019
- 24.05.2019.
Zusätzliche Informationen
R. Soler, R Hahn, M. Bartosik, C. Kirchlechner, G Dehm, P.H. Mayrhofer:
"Can Superlattice Structures Enhance the Fracture Toughness of Hard Coating?";
Poster: Gordon Research Conferences: Thin Film & Small Scale Mechanical Behavior,
Lewiston, ME;
24.07.2016
- 29.07.2016.
M. Todt, M. Bartosik, H. J. Böhm, F. G. Rammerstorfer, P.H. Mayrhofer:
"Influence of Undulations on the Thermo-Mechanical Behavior of Thin Film-Substrate Systems";
Vortrag: Joint Annual Meeting of DMV and GAMM 2016,
Braunschweig;
07.03.2016
- 11.03.2016.
M. Todt, M. Nagler, A. Wagner, M. Bartosik, P.H. Mayrhofer, H. J. Böhm:
"Simulation of the Thermo-Mechanical Behavior of Multi-Layer Thin Film-Substrate Systems";
Vortrag: IEA AMT Executive Committee Meeting,
Wiener Neustadt;
02.06.2017.
A. Wagner, J. Buchinger, M. Todt, D. Holec, P.H. Mayrhofer, M. Bartosik:
"Apparent fracture toughness of TiN coatings with alternating stress fields";
Poster: 46th International Conference on Metallurgical Coatings and Thin Films,
San Diego;
19.05.2019
- 24.05.2019.
Zusätzliche Informationen
A. Wagner, D. Holec, M. Todt, P.H. Mayrhofer, M. Bartosik:
"An analytical study on the role of misfit dislocations in fracture toughness enhancement of superlattice coatings";
Vortrag: 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019),
Vienna;
18.02.2019
- 22.02.2019.
Zusätzliche Informationen
A. Wagner, D. Holec, M. Todt, P.H. Mayrhofer, M. Bartosik:
"Analytical Modelling of Misfit Dislocation Formation in Superlattice Coatings and its Effect on the Fracture Toughness";
Vortrag: 46th International Conference on Metallurgical Coatings and Thin Films,
San Diego;
19.05.2019
- 24.05.2019.
Zusätzliche Informationen
Z. Xu, Z. Zhang, M. Bartosik, P.H. Mayrhofer, Y. He:
"Insight into the structural evolution of nanocrystalline TiN film and the structure-property relationship";
Vortrag: Materials Science and Engineering - MSE 2018,
Darmstadt;
26.09.2018
- 28.09.2018.
L. Zauner, A. Bahr, T Kozák, J Capek, T. Wojcik, O Hunold, S. Kolozsvári, P Zeman, P.H. Mayrhofer, H. Riedl:
"Time-averaged and time-resolved ion fluxes related to reactive HiPIMS deposition of Ti-Al-N films";
Vortrag: ÖGV- Seminar 2021,
Wien;
24.09.2021.
Zusätzliche Informationen
L. Zauner, Ph Ertelthaler, T. Wojcik, H. Bolvardi, S. Kolozsvári, P.H. Mayrhofer, H. Riedl:
"Reactive HiPIMS deposition of Ti-Al-N: Influence of the deposition parameters on the cubic to hexagonal phase transition";
Poster: AVS 2020 International Twitter Poster Competition,
New York, NY, USA;
08.07.2020.
Zusätzliche Informationen
L. Zauner, T. Wojcik, T Kozák, J Capek, H. Bolvardi, S. Koloszvári, P.H. Mayrhofer, H. Riedl:
"Reactive HiPIMS deposition of Ti-Al-N: Influencing the Cubic to Wurtzite phase transition";
Poster: PLATHINIUM (Plasma Thin film International Union Meeting),
Antibes;
23.09.2019
- 27.09.2019.
Zusätzliche Informationen
L. Zauner, T. Wojcik, T Kozák, J Capek, H. Bolvardi, S. Koloszvári, P.H. Mayrhofer, H. Riedl:
"Tuning the cubic to wurtzite phase transition in Ti-Al-N by reactive HiPIMS deposition";
Poster: 46th International Conference on Metallurgical Coatings and Thin Films,
San Diego;
19.05.2019
- 24.05.2019.
Zusätzliche Informationen
L. Zauner, T. Wojcik, T Kozák, J Capek, H. Bolvardi, S. Kolozsvári, P.H. Mayrhofer, H. Riedl:
"Integral and Time-Resolved Ion Distribution Functions in a Reactive Ti-Al HiPIMS Discharge";
Poster: 47th International Conference on Metallurgical Coatings and Thin Films, ICMCTF,
San Diego, CA, USA;
26.04.2021
- 30.04.2021.
Zusätzliche Informationen
L. Zauner, T. Wojcik, T Kozák, J Capek, H. Bolvardi, S. Kolozsvári, P.H. Mayrhofer, H. Riedl:
"Reactive HiPIMS deposition of Ti-Al-N: Influence of the deposition parameters on the cubic to hexagonal phase transition";
Vortrag: 17th International Conference on Plasma Surface Engineering,
Erfurt, Deutschland;
07.09.2020
- 10.09.2020.
Zusätzliche Informationen
L. Zhou, D. Holec, M. Bartosik, F. Körmann, B. Grabowski, J. Neugebauer, P.H. Mayrhofer:
"Structural stability and thermodynamics of CrN magnetic phases from first principles";
Poster: From Electrons to Phase Transitions,
Vienna;
26.02.2014
- 28.02.2014.
Patente
M. Arndt, R. Rachbauer, C. Sabitzer, J. Paulitsch, P. Polcik, P.H. Mayrhofer:
"Produce arc evaporation of metallic, intermetallic and ceramic target materials to Al-Cr-N coatings";
Patent: international, cooperative,
Nr. DE102013006633;
eingereicht: 18.04.2013,
erteilt: 23.10.2014.
C.M. Koller, R. Rachbauer, P. Polcik, J. Ramm, J. Paulitsch, P.H. Mayrhofer:
"Coating method for producing (Al,Cr)2O3-based coatings with enhanced properties";
Patent: international, cooperative,
Nr. WO2014111264;
eingereicht: 17.01.2014,
erteilt: 24.07.2014.
Zusätzliche Informationen
C.M. Koller, R. Rachbauer, P. Polcik, J. Ramm, J. Paulitsch, P.H. Mayrhofer:
"Coating method for producing (Al,Cr)2O3-based coatings with enhanced properties";
Patent: international, cooperative,
Nr. EP2954091;
eingereicht: 17.01.2014,
erteilt: 16.12.2015.
Zusätzliche Informationen
J. Paulitsch, J. Ramm, R. Rachbauer, P.H. Mayrhofer:
"Arc-deposited Al-Cr-O coatings having enhanced coating properties";
Patent: EU,
Nr. WO2013159870;
eingereicht: 22.04.2012,
erteilt: 12.04.2013.
P. Polcik, S. Koloszvári, H. Riedl, P.H. Mayrhofer:
"Sputter target and method for producing a sputter target";
Patent: USA,
Nr. 16489435;
eingereicht: 10.03.2017,
erteilt: 05.12.2019.
Zusätzliche Informationen
R. Rachbauer, M. Arndt, P.H. Mayrhofer, P. Polcik, A. Vieweg, J Kalas, H. Riedl:
"Mo-Si-B layers and method for the production thereof";
Patent: international, cooperative,
Nr. WO2015181176;
eingereicht: 17.09.2014,
erteilt: 03.12.2015.
Zusätzliche Informationen
R. Rachbauer, R. Hollerweger, C.M. Koller, P.H. Mayrhofer:
"Ti-Al-Ta-based coating exhibiting enhanced thermal stability";
Patent: international, cooperative,
Nr. WO2014037104;
eingereicht: 04.09.2013,
erteilt: 13.03.2014.
Zusätzliche Informationen
R. Rachbauer, R. Hollerweger, C.M. Koller, P.H. Mayrhofer:
"Ti-Al-Ta-based coating exhibiting enhanced thermal stability";
Patent: Liechtenstein,
Nr. US20150259782;
eingereicht: 04.09.2013,
erteilt: 17.09.2015.
Zusätzliche Informationen
R. Rachbauer, J. Ramm, J. Paulitsch, P.H. Mayrhofer:
"Arc-deposited Al-Cr-O coatings having enhanced coating properties";
Patent: international, cooperative,
Nr. WO2013159893;
eingereicht: 22.04.2013,
erteilt: 31.10.2013.
R. Rachbauer, J. Ramm, J. Paulitsch, P.H. Mayrhofer:
"Arc-deposited Al-Cr-O coatings having enhanced coating properties";
Patent: Liechtenstein,
Nr. US20150111795;
eingereicht: 22.04.2013,
erteilt: 23.04.2015.
Zusätzliche Informationen
H. Riedl, M. Arndt, P. Polcik, P.H. Mayrhofer:
"Arc Evaporated Me11-Ame2azi/mo1-B-Csicbbzii Multilayer Coatings";
Patent: World Patent,
Nr. WO2016012600A1;
eingereicht: 24.07.2014,
erteilt: 28.01.2016.
C. Sabitzer, J. Paulitsch, P. Polcik, P.H. Mayrhofer:
"Arc Deposition Of Metal, Intermetallic, And Ceramic Target Materials In Order To Produce Al-Cr-N Coatings";
Patent: international, cooperative,
Nr. WO2014170003;
eingereicht: 14.04.2014,
erteilt: 23.10.2014.
Dissertationen (eigene und begutachtete)
M. Arif:
"In Situ Assessment of Sputter Target Erosion and Poisoning by Laser Reflectometry";
Betreuer/in(nen), Begutachter/in(nen): C. Eisenmenger-Sittner, M. Cekada, P.H. Mayrhofer;
E-138,
2017;
Rigorosum: 09.08.2017.
Zusätzliche Informationen
H. Asanuma:
"Hard Ti-Al-N endowed with high heat resistance through alloying with lanthanoids";
Betreuer/in(nen), Begutachter/in(nen): P.H. Mayrhofer, F. Bleicher;
E308,
2019;
Rigorosum: 25.05.2019.
H. Asanuma:
"Hard Ti-Al-N endowed with high heat-resistance through alloying with lanthanoids";
Betreuer/in(nen), Begutachter/in(nen): P.H. Mayrhofer, H. Riedl;
Institute of Materials Science and Technology/E308-01,
2019;
Rigorosum: 30.04.2019.
Zusätzliche Informationen
E. Aschauer:
"Mo-Si-B based coatings: Compositional and architectural approaches for high temperature environments";
Betreuer/in(nen), Begutachter/in(nen): P.H. Mayrhofer, H. Riedl, C. Eisenmenger-Sittner, P. Felfer;
E308,
2018;
Rigorosum: 12.12.2018.
Zusätzliche Informationen
P. Barriobero Vila:
"Phase transformation kinetics during continuous heating of α+β and metastable β titanium alloys";
Betreuer/in(nen), Begutachter/in(nen): G. Requena, D. Fabregue, P.H. Mayrhofer;
Institute of Materials Science and Technology - E308,
2015;
Rigorosum: 24.07.2015.
Zusätzliche Informationen
A. Blutmager:
"Verschleißmodelle und Verschleißschutz in der Plastifiziereinheit von Thermoplast-Spritzgießmaschinen";
Betreuer/in(nen), Begutachter/in(nen): W Friesenbichler, P.H. Mayrhofer;
Chair of Injection Moulding of Polymers, Montanuniversität Leoben,
2018;
Rigorosum: 06.11.2018.
M Broas:
"Quality, Microstructural Refinement and Stability of Atomic-layer-deposited Aluminum Nitride and Aluminum Oxide Films";
Betreuer/in(nen), Begutachter/in(nen): M Paulasto-Kröckel, P.H. Mayrhofer;
Aalto ELEC Doctoral School,
2018.
J. Buchinger:
"Toughness-Governing Mechanisms in Transition Metal Nitride Thin Films";
Betreuer/in(nen), Begutachter/in(nen): P.H. Mayrhofer, F Giuliani, C. Eisenmenger-Sittner;
Werkstoffwissenschaft und Werkstofftechnologie,
2020;
Rigorosum: 29.09.2020.
V. Dalbauer:
"Phase Formation of Cathodic Arc Evaporated Al-Cr and Al-Cr-O Thin Films";
Betreuer/in(nen), Begutachter/in(nen): P.H. Mayrhofer, M. Stüber, C. Gachot;
Werkstoffwissenschaft und Werkstofftechnologie,
2018;
Rigorosum: 28.08.2018.
A. Eder:
"Beschichtung fragiler Granulate im großen Maßstab - SuperBowl";
Betreuer/in(nen), Begutachter/in(nen): C. Eisenmenger-Sittner, P.H. Mayrhofer, H. Kersten;
E-138,
2017;
Rigorosum: 17.10.2017.
Zusätzliche Informationen
M Folkenant:
"Synthesis and Characterization of Amorphous Carbide-based Thin Films";
Betreuer/in(nen), Begutachter/in(nen): U Jansson, P.H. Mayrhofer;
Uppsala University,
2015.
A. Fritsche:
"Hub Design for the Reduction of Process Forced Vibrations in High Performance Grinding";
Betreuer/in(nen), Begutachter/in(nen): F. Bleicher, K. Wegener, P.H. Mayrhofer;
E311,
2017;
Rigorosum: 09.01.2017.
S.A. Glatz:
"Influence of Transition Metals (Zr, Mo, W) on the High Temperature Performance of Arc Evaporated Ti-Al-N Hard Coating";
Betreuer/in(nen), Begutachter/in(nen): P.H. Mayrhofer, C. Gachot, S. Kodambaka;
Institut für Werkstoffwissenschaft und Werkstofftechnologie, E308,
2017;
Rigorosum: 14.06.2017.
R Hahn:
"Fracture toughness of hard coatings";
Betreuer/in(nen), Begutachter/in(nen): P.H. Mayrhofer, M. Bartosik, D. Kiener, C. Eisenmenger-Sittner;
E308 Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2019;
Rigorosum: 13.06.2019.
Zusätzliche Informationen
R. Hollerweger:
"The Role of Tantalum on Structure, Thermal Stability, and Oxidation Resistance of Ti-Al-N and Cr-Al-N Coatings";
Betreuer/in(nen), Begutachter/in(nen): P.H. Mayrhofer, J.M. Schneider;
E308,
2013;
Rigorosum: 19.11.2013.
Zusätzliche Informationen
O Hunold:
"Synthesis, electronic structure, elastic properties, and interfacial behavior of icosahedral boron-rich solids";
Betreuer/in(nen), Begutachter/in(nen): J.M. Schneider, P.H. Mayrhofer;
RWTH Aachen,
2017;
Rigorosum: 17.02.2017.
H. Kariem:
"Phase Identification in Fired and Biological Ceramics: a combined SEM-EDX, XRD, micro-CT, nanoindentation, and scale transition analysis";
Betreuer/in(nen), Begutachter/in(nen): J. Füssl, Ch. Hellmich, L. Sorelli, P.H. Mayrhofer;
Institut für Mechanik der Werkstoffe und Strukturen,
2018;
Rigorosum: 05.10.2018.
A Kirnbauer:
"The High-Entropy Concept for Ceramic Thin Films";
Betreuer/in(nen), Begutachter/in(nen): P.H. Mayrhofer, J.M. Schneider, R. Franz;
Werkstoffwissenschaft und Werkstofftechnologie,
2020;
Rigorosum: 01.04.2020.
F. Klimashin:
"Molybdenum-based hard nitrides";
Betreuer/in(nen), Begutachter/in(nen): P.H. Mayrhofer, G. Ramanath;
E308,
2016;
Rigorosum: 15.03.2016.
Zusätzliche Informationen
M. Königsberger:
"Multiscale Microstructural Modeling in Cement and Concrete: From Hydration to Poroelasticity, Creep, and Strength";
Betreuer/in(nen), Begutachter/in(nen): Ch. Hellmich, B. Pichler, P.H. Mayrhofer, K. Scrivener;
Institut für Mechanik der Werkstoffe und Strukturen,
2016;
Rigorosum: 21.10.2016.
B. Kohlhauser:
"Phase transformation derived protective effects of PVD coatings";
Betreuer/in(nen), Begutachter/in(nen): P.H. Mayrhofer, H. Riedl, A. Erdemir, C. Gachot;
E308,
2018;
Rigorosum: 17.12.2018.
Zusätzliche Informationen
C.M. Koller:
"Triggering the Phase Evolution within TiAlN- and (Al,Cr)2O3-based Hard Coatings by Alloying and Microstructural Concepts";
Betreuer/in(nen), Begutachter/in(nen): P.H. Mayrhofer, J.M. Schneider;
E308,
2015;
Rigorosum: 13.08.2015.
Zusätzliche Informationen
V. Moraes:
"Ab initio driven design of ternary boride-based thin films";
Betreuer/in(nen), Begutachter/in(nen): P.H. Mayrhofer, H. Riedl, J.M. Schneider, A. Limbeck;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2018;
Rigorosum: 04.07.2018.
Zusätzliche Informationen
M. Reiter:
"Gezielte Beeinflussung der Spanbildung mittels Schwingungsunterstützung für das Einlippentiefbohren mit kleinsten Durchmessern";
Betreuer/in(nen), Begutachter/in(nen): F. Bleicher, D. Biermann, P.H. Mayrhofer;
E 311-01,
2020;
Rigorosum: 27.10.2020.
H. Riedl:
"High Temperature, Oxidation and Wear Resistant Coatings";
Betreuer/in(nen), Begutachter/in(nen): P.H. Mayrhofer, H. Störi;
E308,
2015;
Rigorosum: 22.06.2015.
Zusätzliche Informationen
C. Sabitzer:
"The role of coating architecture and diffusion on phase evolution and mechanical properties of Al-Cr-N and Ti-Al-N based materials";
Betreuer/in(nen), Begutachter/in(nen): P.H. Mayrhofer, C. Eisenmenger-Sittner;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2014;
Rigorosum: 15.12.2014.
Zusätzliche Informationen
D.G. Sangiovanni:
"Transition Metal Nitrides: Alloy Design and Surface Properties using Ab-initio and Clas-sical Computational Methods";
Betreuer/in(nen), Begutachter/in(nen): V Chirita, P.H. Mayrhofer;
Linköping University,
2013.
F. Scagnetto:
"Development of Cermets for Sawblade Cutting";
Betreuer/in(nen), Begutachter/in(nen): W. Lengauer, P.H. Mayrhofer;
Institut für Chemische Technologien und Analytik,
2020;
Rigorosum: 05.03.2020.
M. Schlögl:
"Multilayer Design for Increased Toughness of CrN-based Coatings";
Betreuer/in(nen), Begutachter/in(nen): P.H. Mayrhofer, J. Keckes;
Department Metallkunde und Werkstoffprüfung, Montanuniversität Leoben,
2013;
Rigorosum: 18.01.2013.
Zusätzliche Informationen
F. Seifried:
"Entwicklung metallischer PVD-Schichten für NiTi-Substrate mit großer Verformbarkeit";
Betreuer/in(nen), Begutachter/in(nen): M. Stüber, P.H. Mayrhofer;
Karlsruhe Institut of Technology (KIT),
2019;
Rigorosum: 22.07.2019.
A. Siller:
"Parallele Bearbeitung eines Werkstoffverbundes mittels hybriden Kühlschmiersystems";
Betreuer/in(nen), Begutachter/in(nen): F. Bleicher, K. Wegener, P.H. Mayrhofer;
E311,
2017;
Rigorosum: 12.06.2017.
P Sippola:
"Study of Thermal and Plasma Enhanced Atomic Layer Deposition of AlN and Al2O3/TiO2 Films for Diverse Applications";
Betreuer/in(nen), Begutachter/in(nen): H Lipsanen, P.H. Mayrhofer;
Aalto University School of Electrical Engineering,
2018.
M Stubenrauch:
"Aluminium lightweight compensation elements for cryogenic feed lines in launcher pro-pulsion systems";
Betreuer/in(nen), Begutachter/in(nen): M. Weigand, P.H. Mayrhofer;
Konstruktionswissenschaften und Produktentwicklung,
2019;
Rigorosum: 19.12.2019.
L. Volgger:
"Characterisation of Nickel-Based Metallisations for the Soldering of Microchips";
Betreuer/in(nen), Begutachter/in(nen): H. Hutter, P.H. Mayrhofer;
E164,
2019;
Rigorosum: 09/2019.
A. Wagner:
"Quantification of Residual Stresses and Fracture Toughness of Ceramic Multilayer Thin Films";
Betreuer/in(nen), Begutachter/in(nen): P.H. Mayrhofer, M. Bartosik, T. Antretter, V. Chawla;
Werkstoffwissenschaft und Werkstofftechnologie,
2021;
Rigorosum: 28.01.2021.
L. Zhou:
"First-principles studies of CrN-based materials";
Betreuer/in(nen), Begutachter/in(nen): P.H. Mayrhofer, D. Music;
Inst. für Werkstoffwissenschaft und Werkstofftechnologie,
2015;
Rigorosum: 28.05.2015.
Zusätzliche Informationen
Diplom- und Master-Arbeiten (eigene und betreute)
C. Fuger:
"Influence of Ta content on the phase stability and mechanical proper-ties of W1-xTaxB2-z";
Betreuer/in(nen): P.H. Mayrhofer, V. Moraes;
Werkstoffwissenschaft und Werkstofftechnologie,
2018.
D. Garger:
"Entwicklung von hochtemperaturbeständigen Oxidationsschutzschichten auf Basis von Aluminiumoxid";
Betreuer/in(nen): H. Riedl, P.H. Mayrhofer;
E308,
2016;
Abschlussprüfung: 23.06.2016.
Zusätzliche Informationen
S. Glatz:
"Thermal stability and mechanical properties of TiAlZrN arc evaporated coatings";
Betreuer/in(nen): P.H. Mayrhofer;
Department Metallkunde und Werkstoffprüfung, Montanuniversität Leoben,
2013.
Zusätzliche Informationen
T. Glechner:
"Phase stability and thermomechanical properties of sputter deposited Ta-C-N coatings";
Betreuer/in(nen): H. Riedl, P.H. Mayrhofer;
E308,
2018;
Abschlussprüfung: 19.04.2018.
Zusätzliche Informationen
B. Großmann:
"Einfluss der Targetkorngröße auf die Eigenschaften von Ti-Al-N Hartstoffschichten";
Betreuer/in(nen): P.H. Mayrhofer;
Department Metallkunde und Werkstoffprüfung, Montanuniversität Leoben,
2013.
Zusätzliche Informationen
O Hudak:
"Development of γ-TiAl-based oxidation resistant physical vapor deposited coatings";
Betreuer/in(nen): H. Riedl, P.H. Mayrhofer;
Institute of Materials Science and Technology/E308-01,
2019;
Abschlussprüfung: 01.08.2019.
Zusätzliche Informationen
M Janzen:
"Comparison of the pretreatment processes pre-anodizing and chrome-free passivation with KTL for thin aluminum sheets";
Betreuer/in(nen): P.H. Mayrhofer;
Werkstoffwissenschaft und Werkstofftechnologie,
2019.
V Jaszfi:
"Influence of the chemical composition on the structure and morphology evolution of Al-Cr-N coatings in stripping processes";
Betreuer/in(nen): P.H. Mayrhofer;
Werkstoffwissenschaft und Werkstofftechnologie,
2018.
S. Kagerer:
"Hochtemperaturbeständige Oxidationsschutzschichten auf Basis von Aluminiumoxid und MCrAlY-Legierungen";
Betreuer/in(nen): H. Riedl, P.H. Mayrhofer;
E308,
2018;
Abschlussprüfung: 19.04.2018.
Zusätzliche Informationen
A. Kretschmer:
"Selective stripping of AlCrN-coatings from WC-Co cemented carbides";
Betreuer/in(nen): A. Limbeck, P.H. Mayrhofer;
Institut für Chemische Technologien und Analytik,
2018;
Abschlussprüfung: 21.08.2018.
Zusätzliche Informationen
S Lang:
"Thermomechanical properties of Hf-C-N thin films";
Betreuer/in(nen): H. Riedl, P.H. Mayrhofer;
Institute of Materials Science and Technology/E308-01,
2019;
Abschlussprüfung: 18.07.2019.
Zusätzliche Informationen
H. Lasfargues:
"Einfluss der Leerstellen auf die Struktur, mechanischen Eigenschaften und die thermische Stabilität von Hf-C und Ta-C Hartstoffschichten";
Betreuer/in(nen): H. Riedl, P.H. Mayrhofer;
E308,
2016;
Abschlussprüfung: 12.08.2016.
H Marihart:
"Structure, phase evolution and mechanical properties of HiPIMS, pulsed DC and DC sputtered Ta-N films";
Betreuer/in(nen): P.H. Mayrhofer;
Metallkunde und Werkstoffprüfung/ Montanuniversität Leoben,
2015.
Zusätzliche Informationen
M Mirzaei:
"Investigating the mechanical properties of Ti-Al-N hard coatings as a function of annealing temperature";
Betreuer/in(nen): P.H. Mayrhofer;
Werkstoffwissenschaft und Werkstofftechnologie,
2018.
V. Moraes:
"Thermal conductivity of nitride based thin films";
Betreuer/in(nen): P.H. Mayrhofer;
Inst. für Werkstoffwissenschaft und Werkstofftechnologie,
2015.
Zusätzliche Informationen
L Müllauer:
"Screening for intrinsically hard and tough ceramic-like materials";
Betreuer/in(nen): P.H. Mayrhofer;
Werkstoffwissenschaft und Werkstofftechnologie,
2018.
B Osinger:
"Carbon supersaturated solid solution coatings of refractory metals";
Betreuer/in(nen): U Jansson, P.H. Mayrhofer;
Werkstoffwissenschaft und Werkstofftechnologie,
2019.
M Palir:
"Grenzflächen-Design von lichtbogenverdampften Aluminium-Chromium-basierten Oxynitrid-Schichten";
Betreuer/in(nen): H. Riedl, P.H. Mayrhofer;
Institute of Materials Science and Technology/E308-01,
2019;
Abschlussprüfung: 27.08.2019.
Zusätzliche Informationen
F. Radermacher:
"Development of multilayered Alumina/Mo-Si-B coatings for enhanced oxidation resistance";
Betreuer/in(nen): H. Riedl, P.H. Mayrhofer;
E308,
2018;
Abschlussprüfung: 25.01.2018.
Zusätzliche Informationen
S. Rißlegger:
"Design and construction of an acetylene capable PVD based deposition system";
Betreuer/in(nen): P.H. Mayrhofer, H. Riedl;
Werkstoffwissenschaft und Werkstofftechnologie,
2020;
Abschlussprüfung: 27.03.2020.
S. Rißlegger:
"Konstruktion und Aufbau einer Acetylen-fähigen PVD Beschichtungsanlage";
Betreuer/in(nen): H. Riedl, P.H. Mayrhofer;
E308-01, FOB Werkstoffwissenschaften,
2020;
Abschlussprüfung: 27.03.2020.
Zusätzliche Informationen
T. Ritt:
"Herstellung und Charakterisierung von Eisen-Zink-Phasen";
Betreuer/in(nen): P.H. Mayrhofer;
Department Metallkunde und Werkstoffprüfung, Montanuniversität Leoben,
2013.
B Schwartz:
"Influence of Ta on the oxidation resistance of WB2 based thin films";
Betreuer/in(nen): H. Riedl, P.H. Mayrhofer;
Institute of Materials Science and Technology/E308-01,
2019;
Abschlussprüfung: 18.07.2018.
Zusätzliche Informationen
T Spahn:
"Adhesion improvement of CrN coatings in automotive applications";
Betreuer/in(nen): P.H. Mayrhofer, V. Moraes;
Werkstoffwissenschaft und Werkstofftechnologie,
2020;
Abschlussprüfung: 27.02.2020.
C. Steinkellner:
"Diffusion of Fe, Cr, and C in arc evaporated TiN and TiAlN coatings and the influence on microstructure and hardness";
Betreuer/in(nen): P.H. Mayrhofer, C. Sabitzer;
Inst. für Werkstoffwissenschaft und Werkstofftechnologie,
2014.
Zusätzliche Informationen
A. Vieweg:
"Thermal Stability and Oxidation Behavior of Magnetron Sputtered Mo-Si-B Thin Films";
Betreuer/in(nen): P.H. Mayrhofer, H. Riedl;
Metallkunde und Werkstoffprüfung/ Montanuniversität Leoben,
2014.
Zusätzliche Informationen
A Vlasova:
"Influence of Oxygen Impurities on the Structure and Mechanical Properties of Ti-Al-N Coatings";
Betreuer/in(nen): H. Riedl, P.H. Mayrhofer;
E308, Gr. Mayrhofer,
2016;
Abschlussprüfung: 21.01.2016.
Zusätzliche Informationen
P. Wiehoff:
"Structure and mechanical properties of sputtered AlBN coatings";
Betreuer/in(nen): P.H. Mayrhofer, H. Euchner;
Inst. für Werkstoffwissenschaft und Werkstofftechnologie,
2015.
Zusätzliche Informationen
L. Zauner:
"Reactive HiPIMS deposition of Ti-Al-N: Influence of the deposition parameters on the cubic to hexagonal phase transition";
Betreuer/in(nen): H. Riedl, P.H. Mayrhofer;
Institute of Materials Science and Technology/E308-01,
2019;
Abschlussprüfung: 11.04.2019.
Zusätzliche Informationen
Wissenschaftliche Berichte
P.H. Mayrhofer:
"CD-Labor 2-Jahres Evaluierung";
Bericht für CDG;
2013;
46 S.
