Publikationsliste für
Stefan Biffl
als Autorin / Autor bzw. wesentlich beteiligte Person
441 Datensätze (2000 - 2021)
Die Publikationen der TU Wien sind erst ab dem Jahr 2002 vollzählig in der Publikationsdatenbank enthalten. Publikationen aus den Jahren vor 2002 können, müssen aber nicht in der Datenbank vorhanden sein.
Bücher und Buch-Herausgaben
S. Biffl:
"Software Inspection Techniques to support Project and Quality Management";
Shaker Verlag,
Aachen, Germany,
2001,
ISBN: 3-8265-8512-7;
142 S.
S. Biffl, A. Aurum, B. Boehm, H. Erdogmus, P. Grünbacher (Hrg.):
"Value-Based Software Engineering";
Springer,
Berlin Heidelberg,
2005,
ISBN: 3-540-25993-7.
S. Biffl, M. Eckhart, A. Lüder, E. Weippl (Hrg.):
"Security and Quality in Cyber-Physical Systems Engineering";
Springer International Publishing,
Switzerland,
2019,
ISBN: 978-3-030-25311-0;
519 S.
Zusätzliche Informationen
S. Biffl, A. Lüder, D. Gerhard (Hrg.):
"Multi-Disciplinary Engineering for Cyber-Physical Production Systems";
Springer International Publishing,
2017,
ISBN: 978-3-319-56344-2;
472 S.
S. Biffl, R. Sabou (Hrg.):
"Semantic Web Technologies for Intelligent Engineering Applications";
Springer International Publishing Switzerland,
2016,
ISBN: 978-3-319-41488-1;
405 S.
S. Biffl, D. Winkler, J. Bergsmann (Hrg.):
"Software Quality: Process Automation in Software Development; Proceedings of the 4th International Conference, SWQD 2012";
Springer-Verlag Berlin Heidelberg,
2012,
ISBN: 978-3-642-27212-7;
229 S.
P. Grünbacher, S. Biffl, R Höhn, A. Tjoa:
"Stakeholder-Orientierung beim Einsatz von Vorgehensmodellen";
in Buchreihe "Festschrift zum 65. Geburtstag von o. Univ.-Prof.Dr. Gerhard Chroust",
Buchreihen-Herausgeber: C. Hoyer, P. Grünbacher, N. Seyff;
herausgegeben von: Österreichische Computer Gesellschaft;
Österreichische Computer Gesellschaft,
1080 Wien, Piaristengasse 19,
2006,
ISBN: 3-85403-208-0,
141 S.
Zusätzliche Informationen
A. Schatten, M. Demolsky, D. Winkler, S. Biffl, E. Gostischa-Franta, T. Östreicher:
"Best Practice Software-Engineering";
Spektrum Akademischer Verlag Heidelberg,
Heidelberg, Germany,
2010,
ISBN: 978-3-8274-2486-0;
440 S.
A. Tjoa, L. Bellatreche, S. Biffl, J. van Leeuwen, J. Wiedermann (Hrg.):
"SOFSEM 2018: Theory and Practice of Computer Science - 44th International Conference on Current Trends in Theory and Practice of Computer Science, Proceedings";
Springer LNCS,
2018,
ISBN: 978-3-319-73116-2;
698 S.
D. Winkler, J. Bergsmann, S. Biffl (Hrg.):
"Software Quality. Model driven approaches for advanced software engineering - Proceedings of the 6th Software Quality Days";
Springer,
Berlin, Heidelberg,
2014,
ISBN: 978-3-319-03601-4;
245 S.
D. Winkler, J. Bergsmann, S. Biffl (Hrg.):
"Software Quality. Software and Systems Quality in Distributed and Mobile Environments - Proceedings of the 7th Software Quality Days, Scientific Program, Lecture Notes in Business Information Processing, LNBIP (200)";
Springer International Publishing Switzerland,
2015,
ISBN: 978-3-319-13250-1;
133 S.
D. Winkler, S. Biffl, J. Bergsmann (Hrg.):
"'Software Quality. The Future of Systems and Software Development', Proceedings of the 8th Software Quality Days, Scientific Program, Lecture Notes in Business Information Processing";
Springer International Publishing,
2016,
ISBN: 978-3-319-27032-6;
229 S.
D. Winkler, S. Biffl, J. Bergsmann (Hrg.):
"Software Quality. Complexity and Challenges of Software Engineering in Emerging Technologies. Proceedings of the 9th Software Quality Days, Scientific Program, Lecture Notes in Business Information Processing, LNBIP, Volume 269";
Springer International Publishing,
Switzerland,
2017,
ISBN: 978-3-319-49420-3;
189 S.
D. Winkler, S. Biffl, J. Bergsmann (Hrg.):
"Software Quality. Increasing Value in Software and Systems Development - 5th International Conference, SWQD 2013, Vienna, Austria, January 15-17, 2013. Proceedings. Lecture Notes in Business Information Processing 133";
Springer,
Berlin Heidelberg,
2013,
ISBN: 978-3-642-35701-5;
259 S.
D. Winkler, S. Biffl, J. Bergsmann (Hrg.):
"Software Quality. Methods and Tools for better Software and Systems. Proceedings of the 10th Software Quality Days, Scientific Program, Lecture Notes in Business Information Processing, LNBIP, Volume 302";
Springer International Publishing,
Cham, Switzerland,
2018,
ISBN: 978-3-319-71439-4;
191 S.
D. Winkler, S. Biffl, J. Bergsmann (Hrg.):
"Software Quality. The complexity and challenges of Software Engineering and Software Quality in the Cloud";
Springer Nature Switzerland AG,
Switzerland,
2019,
ISBN: 978-3-030-05766-4;
171 S.
D. Winkler, S. Biffl, D. Méndez Fernández, J. Bergsmann (Hrg.):
"Proceedings of the 12th Software Quality Days, Scientific Program, Lecture Notes in Business Information Processing, LNBIP, Volume 371";
Springer,
2020,
ISBN: 978-3-030-35509-8;
138 S.
D. Winkler, S. Biffl, D. Méndez Fernández, M. Wimmer, J. Bergsmann (Hrg.):
"Software Quality: Future Perspectives on Software Engineering Quality, Proceedings of the 13th Software Quality Days, Scientific Program, Lecture Notes in Business Information Processing, LNBIP, Volume 404";
Springer,
Schweiz,
2021,
ISBN: 978-3-030-65853-3;
159 S.
W. Zuser, S. Biffl, T. Grechenig, M. Köhle:
"Software Engineering mit UML und dem Unified Process";
Pearson Studium,
München,
2001,
ISBN: 3-8273-7027-2;
377 S.
Zeitschriftenartikel
D. Ameller, X. Franch, C. Gómez, S. Martínez-Fernández, J. Araujo, S. Biffl, J. Cabot, V. Cortellessa, D. Méndez Fernández, A. Moreira, H. Muccini, A. Vallecillo, M. Wimmer, V. Amaral, W. Böhm, H. Brunelière, L. Burgueño, M. Goulão, S. Teufl, L. Berardinelli:
"Dealing with Non-Functional Requirements in Model-Driven Development: A Survey";
IEEE Transactions on Software Engineering,
(*)
(2019).
Zusätzliche Informationen
M. Auer, A Trendowicz, B. Graser, S. Biffl, E Haunschmid:
"Optimal Project Feature Weights in Analogy-Based Cost Estimation: Improvement and Limitations";
IEEE Transactions on Software Engineering,
32
(2006),
2;
S. 83
- 92.
Zusätzliche Informationen
M. Babar, H. Shen, S. Biffl, D. Winkler:
"An Empirical Study of the Effectiveness of Software Architecture Evaluation Meetings";
IEEE Access,
7
(2019),
S. 79069
- 79084.
Zusätzliche Informationen
M. Barth, S. Biffl, R. Drath, A. Fay, D. Winkler:
"Bewertung der Offenheit von Engineering-Tools";
Open Automation,
4
(2013),
S. 12
- 15.
L. Berardinelli, S. Biffl, A. Lüder, E. Mätzler, T. Mayerhofer, M. Wimmer, S. Wolny:
"Cross-disciplinary Engineering with AutomationML and SysML";
at - Automatisierungstechnik,
64
(2016),
4;
S. 253
- 269.
Zusätzliche Informationen
S. Biffl:
"Evaluating defect estimation models with major defects";
Journal of Systems and Software,
65
(2003),
S. 13
- 29.
S. Biffl:
"Guest Editorial for the Special Section on the Euromicro 2011 Conference on Software Engineering and Advanced Applications (SEAA)";
Information and Software Technology,
55
(2013),
S. 1063.
S. Biffl:
"Lesetechniken für die Inspektion von Software-Anforderungsdokumenten";
Informatik - Forschung und Entwicklung,
September 2001
(2001).
S. Biffl:
"Using Inspection Data for Defect Estimation";
IEEE Software,
Special Issue on recent project estimation methods
(2000).
S. Biffl:
"Weg von den Software-Werkzeuginseln - Lücken beim parallelen Engineering industrieller Anlagen schließen";
ke NEXT,
6
(2013),
S. 88
- 90.
Zusätzliche Informationen
S. Biffl, P. Grünbacher, M. Halling:
"A Family of Experiments to Investigate the Effects of Groupware for Software Inspection";
Journal of Automated Software Engineering,
13
(2006),
3;
S. 373
- 394.
Zusätzliche Informationen
S. Biffl, W. Gutjahr:
"Using a Reliability Growth Model to Control Software Inspection";
Empirical Software Engineering,
7
(2002),
S. 257
- 284.
S. Biffl, M. Halling:
"Investigation the defect detection effectiveness and cost benefit of nominal inspection teams";
IEEE Transactions on Software Engineering,
29
(2003),
5;
S. 385
- 397.
S. Biffl, R. Mordinyi, T Moser:
"Anforderungsanalyse für das integrierte Engineering - Mechanismen und Bedarfe aus der Praxis";
atp edition,
5
(2012),
S. 28
- 35.
Zusätzliche Informationen
S. Biffl, R. Mordinyi, T Moser:
"Integriertes Engineering mit Automation Service Bus - Paralleles Engineering mit heterogenen Werkzeugen";
atp edition,
12
(2012),
S. 36
- 43.
Zusätzliche Informationen
S. Biffl, T Moser, R. Mordinyi:
"Alle auf "einer" Spur";
Computer & AUTOMATION,
6
(2012),
S. 41
- 44.
S. Biffl, T Moser, D. Winkler:
"Risk Assessment In Multi-Disciplinary (Software+) Engineering Projects";
International Journal of Software Engineering and Knowledge Engineering,
Special Issue: Software Risk Assessment (Volume 21)
(2011),
2;
S. 211
- 236.
Zusätzliche Informationen
S. Biffl, A. Zoitl, H. Steininger:
"Integration ist alles";
IEE Elektrische Automatisierung + Antriebstechnik,
56
(2011),
11;
S. 42
- 44.
S. Biffl, A. Zoitl, H. Steininger:
"Kollaboratives Engineering vereinfachen";
all-electronics.de,
1
(2011).
T. Bures, D. Weyns, C. Berger, S. Biffl, M. Daun, T. Gabor, D. Garlan, I. Gerostathopoulos, C. Julien, F. Krikava, R. Mordinyi, N. Pronios:
"Software Engineering for Smart Cyber-Physical Systems -- Towards a Research Agenda: Report on the First International Workshop on Software Engineering for Smart CPS.";
ACM SIGSOFT Software Engineering Notes,
40
(2015),
6;
S. 28
- 32.
Zusätzliche Informationen
M. Ciolkowski, O. Laitenberger, S. Biffl:
"Software reviews: The state of the practice";
IEEE Software,
20
(2003),
6;
S. 46
- 51.
F. Ekaputra, R. Sabou, E. Kiesling, E. Serral Asensio, S. Biffl:
"Ontology Based Data Integration in Multi-Disciplinary Engineering Environments: A Review";
Open Journal of Information Systems,
4
(2017),
1;
26 S.
Zusätzliche Informationen
P. Grünbacher, M. Halling, S. Biffl, H. Kitapci, B. Boehm:
"Integrating Collaborative Processes and Quality Assurance Techniques: An Example from Requirements Negotiation";
Journal of Management Information Systems,
20
(2004),
4;
S. 9
- 30.
M. Halling, S. Biffl:
"Investigating the influence of software inspection process parameters on inspection meeting performance";
IEE Proceedings - Software,
149
(2002),
5;
S. 115
- 121.
M. Halling, S. Biffl, P. Grünbacher:
"An Economic Approach for Improving Requirements Negotiation Models with Inspection";
Requirements Engineering,
8
(2003),
S. 236
- 247.
M. Kalinowski, S. Biffl, R. Spinola, S. Reinehr:
"From project-oriented to service-oriented software development: an industrial experience guided by a service reference model";
Journal of Software Engineering Research and Development,
2
(2014),
23 S.
Zusätzliche Informationen
T. Kremmel, J. Kubalik, S. Biffl:
"Software Project Portofolio Optimization with Advanced Multiobjective Evolutionary Algorithms";
Applied Soft Computing,
11
(2011),
1;
S. 1416
- 1426.
Zusätzliche Informationen
M. Kuhrmann, P. Tell, R. Hebig, J. Klünder, J. Münch, O. Linssen, D. Pfahl, M. Felderer, C. Prause, S. MacDonell, J. Nakatumba-Nabende, D. Raffo, S. Beecham, E. Tüzün, G. Lopez, N. Paez, D. Fontdevila, S. Licorish, S. Küpper, G. Ruhe, E. Knauss, Ö. Özcan-Top, P. Clarke, F. McCaffery, M. Genero, A. Vizcaino, M. Piattini, M. Kalinowski, T. Conte, R. Prikladnicki, S. Krusche, A. Coskuncay, E. Scott, F. Calefato, S. Pimonova, R. Pfeiffer, U. Pagh Schultz, R. Heldal, M. Fazal-Bacqaie, C. Anslow, M. Nayebi, K. Schneider, S. Sauer, D. Winkler, S. Biffl, M. Bastarrica, I. Richardson:
"What Makes Agile Software Development Agile?";
IEEE Transactions on Software Engineering,
1
(2021),
16 S.
Zusätzliche Informationen
A. Lüder, N. Schmidt, T. Petzold, H. Steininger, S. Biffl:
"Anforderungen an Engineeringketten";
ETZ elektrotechnik & automation,
9
(2013),
S. 18
- 22.
A. Lüder, H. Steininger, S. Biffl, N. Schmidt, T. Petzold:
"Quo vadis Softwarewerkzeuge - Studienergebnis zum Thema Entwicklungswerkzeuge";
SPS Magazin,
7
(2013),
S. 43
- 45.
M. Merdan, T Moser, W. Sunindyo, S. Biffl, P. Vrba:
"Workflow scheduling using multi-agent systems in a dynamically changing environment";
Journal of Simulation,
0
(2012),
15 S.
Zusätzliche Informationen
M. Merdan, T Moser, P. Vrba, S. Biffl:
"Investigating the Robustness of Re-Scheduling Policies with Multi-Agent System Simulation";
International Journal Of Advanced Manufacturing Technology,
55
(2011),
1-4;
S. 355
- 367.
Zusätzliche Informationen
T Moser, S. Biffl, W. Sunindyo, D. Winkler:
"Integrating Production Automation Expert Knowledge Across Engineering Domains";
International Journal of Distributed Systems and Technologies (IJDST),
Special Issue: Current Methods in Resource Integration, Allocation and Scheduling
(2010),
S. 88
- 103.
Zusätzliche Informationen
T. Neubauer, S. Biffl:
"Geschäftsprozessmanagement -Eine empirische Studie zum Status quo in Österreich, der Schweiz und Deutschland";
OCG Journal,
5
(2005),
S. 9
- 10.
Zusätzliche Informationen
I. Rus, M. Halling, S. Biffl:
"Supporting Decision-Making in Software Engineering with Process Simulation and Empirical Studies";
International Journal of Software Engineering and Knowledge Engineering,
13
(2003),
5;
S. 531
- 545.
M. Sabou, S. Biffl, A. Einfalt, L. Krammer, W. Kastner, F. Ekaputra:
"Semantics for Cyber-Physical Systems: A Cross-Domain Perspective";
Semantic Web,
11
(2020),
1;
S. 115
- 124.
K. Schmid, S. Biffl:
"Systematic Management of Software Product Lines";
Software Process Improvement and Practice,
10
(2005),
S. 61
- 76.
D. Wahyudin, K. Mustofa, A. Schatten, A. Tjoa, S. Biffl:
"Monitoring "Health" Status of Open Source Web Engineering Projects";
International Journal of Web Information System,
1/2
(2007),
3;
S. 116
- 139.
Zusätzliche Informationen
D. Winkler, S. Biffl:
"Guest editorial: special section on software quality assurance and quality management";
Software Quality Journal,
22
(2014),
S. 467
- 468.
D. Winkler, S. Biffl, H. Steininger:
"Integration von heterogenen Engineering Daten mit AutomationML und dem AML.hub: Konsistente Daten über Fachbereichsgrenzen hinweg";
develop3 systems engineering,
3
(2015),
S. 62
- 64.
Zusätzliche Informationen
D. Winkler, M. Kalinowski, R. Sabou, S. Petrovic, S. Biffl:
"Investigating a Distributed and Scalable Model Review Process";
Centro Latinoamericano de Estudios en Informatica (CLEI) (eingeladen),
21
(2018),
13 S.
Zusätzliche Informationen
Editorials in wiss. Zeitschriften
A. Mazak, A. Lüder, S. Wolny, M. Wimmer, D. Winkler, R. Rosendahl, H. Bayanifar, S. Biffl:
"Model-Based Generation of Runt-Time Data Collection Systems Exploiting AutomationML";
at - Automatisierungstechnik,
66
(2018),
S. 819
- 833.
Zusätzliche Informationen
B. Vogel-Heuser, S. Biffl:
"Cross-discipline modeling and its contribution to automation";
at - Automatisierungstechnik,
64
(2016),
3;
S. 165
- 167.
Buchbeiträge
S. Biffl, M. Ciolkowski, F. Shull:
"A Family of Experiments to Investigate the Influence of Context on the Effect of Inspection Techniques";
in: "Proceedings of the Empirical Assessment in Software Engineering",
IEE,
2002.
S. Biffl, M. Eckhart, A. Lüder, E. Weippl:
"Conclusion and Outlook on Security & Quality of Complex Cyber-Physical Systems Engineering";
in: "Security and Quality in Cyber-Physical Systems Engineering",
Springer International Publishing,
Switzerland,
2019,
ISBN: 978-3-030-25311-0.
Zusätzliche Informationen
S. Biffl, M. Eckhart, A. Lüder, E. Weippl:
"Introduction to Security & Quality Improvement in Complex Cyber-Physical Systems Engineering";
in: "Security and Quality in Cyber-Physical Systems Engineering",
Springer International Publishing,
Switzerland,
2019,
ISBN: 978-3-030-25311-0.
Zusätzliche Informationen
S. Biffl, D. Gerhard, A. Lüder:
"Conclusions and Outlook on Research for Multi-Disciplinary Engineering for Cyber-Physical Production Systems";
in: "Multi-Disciplinary Engineering of Cyber-Physical Production Systems",
S. Biffl, A. Lüder, D. Gerhard (Hrg.);
Springer,
Switzerland,
2017,
ISBN: 978-3-319-56344-2,
S. 459
- 468.
S. Biffl, D. Gerhard, A. Lüder:
"Introduction to the Multi-Disciplinary Engineering of Cyber-Physical Production Systems";
in: "Multi-Disciplinary Engineering of Cyber-Physical Production Systems",
S. Biffl, A. Lüder, D. Gerhard (Hrg.);
Springer,
Switzerland,
2017,
ISBN: 978-3-319-56344-2,
S. 1
- 24.
Zusätzliche Informationen
S. Biffl, M. Halling:
"Investigating the influence of inspector capability factors with four inspection techniques on inspection performance";
in: "Proceedings of the IEEE Software Metrics Symposium 2002",
IEEE Computer Society Press,
2002,
ISBN: 0-7695-1339-5,
S. 107
- 117.
S. Biffl, M. Halling:
"Managing Software Inspection Knowledge for Decision Support of Inspection Planing";
in: "Managing Software Engineering Knowledge",
herausgegeben von: Aurum A., Jeffery R., Wohlin C., Handzic M.;
Springer,
2003,
ISBN: 3-540-00370-3,
S. 231
- 249.
S. Biffl, M. Halling, S. Köszegi:
"Investigating the accuracy of defect estimation models for individuals and teams based on inspection data";
in: "Empirical Software Engineering, 2003. ISESE 2003. Proceedings. 2003 International Symposium on , 30 Sept. - 1 Oct. 2003",
herausgegeben von: IEEE;
IEEE Computer Society Press,
2003,
ISBN: 0-7695-2002-2,
S. 232
- 244.
S. Biffl, A. Lüder, F. Rinker, L. Waltersdorfer, D. Winkler:
"Engineering Data Logistics for Agile Automation Systems Engineering";
in: "Security and Quality in Cyber-Physical Systems Engineering",
Springer International Publishing,
Switzerland,
2019,
ISBN: 978-3-030-25311-0.
Zusätzliche Informationen
S. Biffl, A. Lüder, D. Winkler:
"Multi-Disciplinary Engineering for Industrie 4.0: Semantic Challenges and Needs";
in: "Semantic Web Technologies for Intelligent Engineering Applications",
Springer International Publishing Switzerland,
2016,
ISBN: 978-3-319-41488-1,
S. 17
- 51.
Zusätzliche Informationen
S. Biffl, R. Mordinyi, H. Steininger, D. Winkler:
"Integrationsplattform für anlagenmodellorientiertes Engineering: Bedarfe und Lösungsansätze";
in: "Handbuch Industrie 4.0",
Springer-Verlag Berlin Heidelberg,
2016,
ISBN: 978-3-662-45537-1,
S. 189
- 212.
Zusätzliche Informationen
S. Biffl, R. Mordinyi, H. Steininger, D. Winkler:
"Integrationsplattform für anlagenmodellorientiertes Engineering: Bedarfe und Lösungsansätze";
in: "Handbuch Industrie 4.0",
2;
B. Vogel-Heuser, T. Bauernhansl, M. ten Hompel (Hrg.);
Springer-Verlag,
Deutschland,
2017,
ISBN: 978-3-662-53247-8,
S. 189
- 212.
Zusätzliche Informationen
S. Biffl, R. Mordinyi, H. Steininger, D. Winkler:
"Prozessunterstützung durch eine Integrationsplattform für anlagenmodellorientiertes Engineering - Bedarfe und Lösungsansätze";
in: "Handbuch Industrie 4.0",
Springer,
2017.
Zusätzliche Informationen
S. Biffl, R. Sabou:
"Introduction";
in: "Semantic Web Technologies for Intelligent Engineering Applications",
Springer International Publishing Switzerland,
2016,
ISBN: 978-3-319-41488-1,
S. 1
- 13.
Zusätzliche Informationen
S. Biffl, D. Winkler, L. Kathrein, F. Rinker, R. Mordinyi, H. Steininger:
"Prozessunterstützung für modellorientiertes Engineering von CPPS von der Konzeptphase bis zur virtuellen Inbetriebnahme: Bedarfe und Lösungsansätze";
in: "Handbuch Industrie 4.0",
3;
Springer,
Berlin, Heidelberg,
2020,
ISBN: 978-3-662-45537-1,
S. 1
- 39.
Zusätzliche Informationen
M. Ciolkowski, O. Laitenberger, S. Vegas, S. Biffl:
"Practical Experiences in the Design and Conduct of Surveys in Empirical Software Engineering";
in: "Empirical Methods and Studies in Software Engineering - Experiences from ESERNET",
R. Conradi, A. Wang (Hrg.);
herausgegeben von: ESERNET;
Springer,
2003,
ISBN: 3540406727,
S. 104
- 128.
D. Dhungana, I. Groher, E. Schludermann, S. Biffl:
"Guiding principles of natural ecosystems and their applicability to software ecosystems";
in: "Software Ecosystems, Analyzing and Managing Business Networks in th Software Industry",
Edward Elgar Publishing Ltd.,
2013,
ISBN: 9781781955635,
S. 43
- 58.
A. Egyed, P. Grünbacher, M. Heindl, S. Biffl:
"Value-Based Requirements Traceability: Lessons Learned";
in: "Design Requirements Engineering: A Ten-Year Perspective",
K. Lyytinen, P. Loucopoulos, J. Mylopoulos, W. Robinson (Hrg.);
Springer,
Germany,
2009,
ISBN: 978-3-540-92965-9,
S. 240
- 257.
Zusätzliche Informationen
S. Fladischer, S. Biffl:
"Objektorientierte Softwareprodukte mit RUP und UML";
in: "Das V-Modell XT: Grundlagen, Methodik und Anwendungen",
herausgegeben von: Reinhard Höhn, Stephan Höppner, A. Rausch, M. Broy;
Springer,
Heidelberg,
2008,
ISBN: 978-3540302490,
S. 276
- 298.
Zusätzliche Informationen
P. Grünbacher, M. Halling, S. Biffl:
"An empirical study on groupware support for software inspection meetings";
in: "Automated Software Engineering, 2003. Proceedings. 18th IEEE International Conference on , 6-10 Oct. 2003 ",
herausgegeben von: IEEE;
IEEE Computer Society Press,
2003,
ISBN: 0-7695-2035-9,
S. 4
- 11.
P. Grünbacher, M. Halling, S. Biffl, H. Kitapci, B. Boehm:
"Repeatable quality assurance techniques for requirements negotiations";
in: "36th annual Hawaii international conference on system sciences",
IEEE Computer Society Press,
2003,
ISBN: 0-7695-1874-5,
S. 23
- 31.
P. Grünbacher, S. Köszegi, S. Biffl:
"Stakeholder Value Proposition Elicitation and Reconciliation";
in: "Value-Based Software Engineering",
Springer,
Berlin Heidelberg,
2005,
ISBN: 3-540-25993-7,
S. 133
- 154.
P. Grünbacher, S. Köszegi, S. Biffl:
"Stakeholder Value Proposition Elicitation and Reconciliation";
in: "Value-Based Software Engineering",
Springer-Verlag,
Berlin-Heidelberg,
2006,
ISBN: 3-540-25993-7,
S. 133
- 154.
M. Halling, S. Biffl:
" Investigating the influence of software inspection process parameters on inspection meeting performance";
in: "Proceedings of the Conference on Empirical Assessment in Software Engineering 2002",
herausgegeben von: Conference on Empirical Assessment in Software Engineering;
IEE,
GB,
2002,
5,
S. 115
- 121.
M. Halling, S. Biffl, P. Grünbacher:
"A Groupware-Supported Inspection Process for Active Inspection Management";
in: "Proceedings of the Euromicro Conference 2002",
IEEE Computer Society Press,
2002,
S. 251
- 258.
M. Halling, S. Biffl, P. Grünbacher:
"An experiment family to investigate the defect detection effect of tool-support for requirements inspection";
in: "Software Metrics Symposium, 2003. Proceedings. Ninth International , Sept. 3-5, 2003 ",
herausgegeben von: IEEE;
IEEE Computer Society Press,
2003,
ISBN: 0-7695-1987-3,
S. 278
- 285.
M. Halling, S. Biffl, P. Grünbacher:
"The Role of Valuation in Value-Based Software Engineering";
in: "6th International Workshop on Economics-Driven Software Engineering Research Proceedings",
herausgegeben von: icse conference series;
IEE,
2004,
ISBN: 0-86341-424-9,
S. 7
- 10.
M. Halling, W. Zuser, M. Köhle, S. Biffl:
"Teaching the Unified Process to Undergraduate Students";
in: "Proceedings of the IEEE Conference on SE Education and Training",
IEEE Computer Society Press,
2002,
ISBN: 0769515150,
S. 148
- 159.
Zusätzliche Informationen
L. Kathrein, A. Lüder, K. Meixner, D. Winkler, S. Biffl:
"Product/ion-Aware Analysis of Collaborative Systems Engineering Processes";
in: "Security and Quality in Cyber-Physical Systems Engineering",
Springer International Publishing,
Switzerland,
2019,
ISBN: 978-3-030-25311-0.
Zusätzliche Informationen
H. Kitapci, B. Boehm, P. Grünbacher, M. Halling, S. Biffl:
"Formalizing informal stakeholder requirements inputs";
in: "13th annual INCOSE Symposium, July 1-3, 2003 ",
herausgegeben von: Int. Council on Systems Engineering;
International Council on Systems Engineering,
2003,
ISBN: 0-9720562-1-1,
S. 447
- 459.
M. Klemen, S. Biffl:
"Economic Aspects and Needs in IT-Security Risk Management for SMEs";
in: "6th International Workshop on Economics-Driven Software Engineering Research Proceedings",
herausgegeben von: icse conference series;
IEE,
2004,
ISBN: 0-86341-424-9,
S. 43
- 47.
A. Lüder, S. Biffl, F. Rinker, A. Behnert:
"Engineering Data Logistics based on AutomationML";
in: "AutomationML - The Industrial Cookbook",
DeGruyter,
2021,
ISBN: 3110745925,
S. 579
- 602.
M. Merdan, M. Vallee, T Moser, S. Biffl:
"A Layered Manufacturing System Architecture Supported with Semantic Agent Capabilities";
in: "Semantic Agent Systems: Foundations and Applications",
A. Elci, M. Kone, M. Orgun (Hrg.);
Springer-Verlag,
2011,
ISBN: 978-3-642-18307-2,
S. 1
- 29.
T Moser, R. Mordinyi, A. Mikula, S. Biffl:
"Efficient Integration of Complex Information Systems in the ATM Domain with Explicit Expert Knowledge Models";
in: "Complex Intelligent Systems and Their Applications",
Springer-Verlag,
New York,
2010,
ISBN: 978-1-4419-1635-8,
S. 1
- 19.
Zusätzliche Informationen
T Moser, R. Mordinyi, W. Sunindyo, S. Biffl:
"Semantic Service Matchmaking in the ATM Domain Considering Infrastructure Capability Constraints";
in: "Canadian Semantic Web: Technologies and Applications",
W. Du, F. Ensan (Hrg.);
Springer-Verlag,
University of New Brunswick, Canada,
2010,
ISBN: 978-1-4419-7334-4,
S. 133
- 157.
Zusätzliche Informationen
J. Musil, A. Musil, S. Biffl:
"Introduction and Challenges of Environment Architectures for Collective Intelligence Systems";
in: "Agent Environments for Multi-Agent Systems IV",
Springer International Publishing,
2015,
ISBN: 978-3-319-23849-4,
S. 76
- 94.
Zusätzliche Informationen
P. Novak, P. Kadera, V. Jirkovsky, P. Vrba, S. Biffl:
"Engineering of Coupled Simulation Models for Mechatronic Systems";
in: "Service Orientation in Holonic and Multi-agent Manufacturing, Studies in Computational Intelligence",
Springer,
2015,
ISBN: 978-3-319-15158-8,
S. 3
- 11.
Zusätzliche Informationen
I. Omoronyia, G. Sindre, S. Biffl, T. Stalhane:
"Understanding Architectural Elements from Requirements Traceability Networks";
in: "Relating Software Requirements and Architectures",
P. Avgeriou, J. Grundy, J. Hall, P. Lago, I. Mistrík (Hrg.);
Springer-Verlag Berlin Heidelberg,
Berlin Heidelberg,
2011,
ISBN: 978-3-642-21000-6,
S. 61
- 83.
Zusätzliche Informationen
R. Ramler, S. Biffl, P. Grünbacher:
"Value-Based Management of Software Testing";
in: "Value-Based Software Engineering",
Springer,
Berlin Heidelberg,
2005,
ISBN: 3-540-25993-7,
S. 225
- 244.
R. Sabou, F. Ekaputra, S. Biffl:
"Semantic Web Technologies for Data Integration in Multi-Disciplinary Engineering";
in: "Multi-Disciplinary Engineering of Cyber-Physical Production Systems",
S. Biffl, A. Lüder, D. Gerhard (Hrg.);
Springer,
Switzerland,
2017,
ISBN: 978-3-319-56344-2,
S. 301
- 329.
Zusätzliche Informationen
R. Sabou, O. Kovalenko, F. Ekaputra, S. Biffl:
"Beiträge des Semantic Web zum Engineering für Industrie 4.0";
in: "Handbuch Industrie 4.0",
Springer,
2015.
Zusätzliche Informationen
R. Sabou, O. Kovalenko, F. Ekaputra, S. Biffl:
"Semantic Web Solutions in Engineering";
in: "Semantic Web for Intelligent Engineering Applications",
Springer International Publishing Switzerland,
2016,
ISBN: 978-3-319-41488-1,
S. 281
- 296.
Zusätzliche Informationen
R. Sabou, D. Winkler, S. Biffl:
"Human Computation Method in Empirical Software Engineering";
in: "Contemporary Empirical Methods in Software Engineering",
Springer International Publishing,
Switzerland,
2020,
ISBN: 978-3-030-32488-9,
S. 173
- 215.
Zusätzliche Informationen
A. Schatten, S. Biffl:
"Towards an Event-Driven Workplace for Knowledge Integration";
in: "Euromicro Conference, 2004. Proceedings. 30th , Aug. 31 - Sept. 3, 2004",
IEEE,
2004,
ISBN: 0-7695-2199-1,
S. 437
- 446.
A. Schatten, S. Biffl, A. Tjoa:
"Closing the gap: from nescience to knowledge management";
in: "Euromicro Conference, 2003. Proceedings. 29th , Sept 1-6, 2003",
IEEE Computer Society Press,
2003,
ISBN: 0-7695-1996-2,
S. 327
- 335.
W. Sunindyo, T Moser, D. Winkler, R. Mordinyi, S. Biffl:
"Workflow Validation Framework in Collaborative Engineering Environments";
in: "Distributed Computing Innovations for Business, Engineering and Science",
herausgegeben von: Alfred Waising Loo;
Information Science Reference,
2013,
ISBN: 978-1-4666-2533-4,
S. 285
- 299.
Zusätzliche Informationen
A. Tjoa, S. Biffl, P. Grünbacher, R Höhn:
"Stakeholder-Orientierung beim Einsatz von Vorgehensmodellen";
in: "Festschrift zum 65. Geburtstag von o.Univ.-Prof. Dr. Gerhard Chroust",
herausgegeben von: OCG;
OCG Schriftenreihe, Österreichische Arbeitsgemeinschaft für Mustererkennung,
Wien,
2006,
ISBN: 3-85403-208-0,
S. 141
- 148.
D. Winkler, S. Biffl:
"Das ISO 9000:2000 Regelwerk - Ansätze zur Integration des VM XT mit einem Qualitätsmanagementsystem";
in: "Das V-Modell XT: Grundlagen, Methodik und Anwendungen",
herausgegeben von: Reinhard Höhn, Stephan Höppner, A. Rausch, M. Broy;
Springer,
Heidelberg,
2008,
ISBN: 978-3540302490,
S. 481
- 509.
Zusätzliche Informationen
D. Winkler, S. Biffl:
"Improving Quality Assurance in Automation Systems Development Projects";
in: "Quality Assurance and Management",
herausgegeben von: Prof. Mehment Savsar;
InTech,
2012,
ISBN: 979-953-307-494-7,
S. 379
- 398.
D. Winkler, M. Halling, S. Biffl:
"Investigating the Effect of Expert Ranking of Use Cases for Design Inspection";
in: "Euromicro Conference, 2004. Proceedings. 30th , Aug. 31 - Sept. 3, 2004",
IEEE,
2004,
ISBN: 0-7695-2199-1,
S. 362
- 371.
D. Winkler, K. Meixner, R. Mordinyi, S. Biffl:
"Modell-unterstützte Qualitätssicherung für das Engineering industrieller Produktionssysteme";
in: "Handbuch Industrie 4.0",
3;
Springer,
Berlin, Heidelberg,
2020,
ISBN: 978-3-662-45537-1,
S. 1
- 33.
Zusätzliche Informationen
D. Winkler, R. Mordinyi, S. Biffl:
"Qualitätssicherung in heterogenen und verteilten Entwicklungsumgebungen für industrielle Produktionssysteme";
in: "Handbuch Industrie 4.0",
B. Vogel-Heuser, T. Bauernhansl, M. ten Hompel (Hrg.);
Springer-Verlag Berlin Heidelberg,
2016,
ISBN: 978-3-662-53247-8,
S. 259
- 278.
Zusätzliche Informationen
D. Winkler, R. Sabou, S. Biffl:
"Improving Quality Assurance in Multi-Disciplinary Engineering Environments with Semantic Technologies";
in: "Quality Control and Assurance - An Ancient Greek Term ReMastered",
InTech,
2017,
ISBN: 978-953-51-2921-9,
S. 177
- 200.
Zusätzliche Informationen
D. Winkler, M. Wimmer, L. Berardinelli, S. Biffl:
"Towards Model Quality Assurance for Multi-Disciplinary Engineering";
in: "Multi-Disciplinary Engineering for CPPS",
TBD;
herausgegeben von: Springer;
Springer,
2017,
ISBN: 978-3-319-56344-2,
S. 433
- 457.
Zusätzliche Informationen
Beiträge in Tagungsbänden
M. Auer, S. Biffl:
"Fast and Flexible Libor Model Pricing: Two-Stage Monte Carlo and On-the-Fly Payoff Processing";
in: "Computational Finance and Its Applications III",
C.A. Brebbia, M. Constantino, M. Larran (Hrg.);
herausgegeben von: Wessex Institute;
Wessex Institute Press,
2008,
ISBN: 978-1-84564-111-5,
S. 1
- 11.
Zusätzliche Informationen
M. Auer, S. Biffl:
"Increasing the Accuracy and Reliability of Analogy-Based Cost Estimation with Extensive Project Feature Dimension Weighting";
in: "Proc. of International Symposium on Empirical Software Engineering (ISESE 2004)",
herausgegeben von: IEEE;
IEEE,
2004,
ISBN: 0-7695-2165-7,
S. 147
- 155.
Zusätzliche Informationen
M. Auer, B. Graser, S. Biffl:
"An Approach to Visualizing Empirical Software Project Portfolio Data Using Multidimensional Scaling";
in: "Proc. of IEEE International Conference on Information Reuse and Integration (IRI 2003)",
IEEE Computer Society Press,
2003,
ISBN: 0-7803-8242-0,
S. 504
- 512.
Zusätzliche Informationen
M. Auer, B. Graser, S. Biffl:
"Survey on the fitness of commercial software metric tools for service in heterogeneous environments:common pitfalls";
in: "Proc. of 9th International Software Metrics Symposium (METRICS 2003)",
herausgegeben von: IEEE;
IEEE Computer Society Press,
2003,
ISBN: 0-7695-1987-3,
S. 144
- 152.
Zusätzliche Informationen
M. Auer, B. Graser, S. Biffl:
"Visualizing Software Project Analogies to Support Cost Estimation";
in: "Proc. of 6th IEEE International Conference on Enterprise Information Systems (ICEIS 2004)",
herausgegeben von: IEEE;
IEEE,
Los Alamitos,
2004,
ISBN: 972-8865-00-7,
S. 61
- 68.
Zusätzliche Informationen
M. Auer, L. Meyer, S. Biffl:
"Explorative UML Modeling - Comparing the Usability of UML Tools";
in: "Proceedings of the 9th International Conference on Enterprise Information Systems (ICEIS 2007)",
herausgegeben von: ICEIS;
INSTICC Press,
2007,
ISBN: 978-972-8865-90-0,
S. 466
- 474.
M. Auer, A. Rauber, S. Biffl, C. Becker:
"Implicit Analogy-Based Cost Estimation Using Textual Use Case Similarities";
in: "Proc. of 2nd International Conference of Intelligent Computing and Information Systems (ICICIS 2005)",
ACM Press,
2005,
ISBN: 977-237-172-3,
S. 369
- 376.
Zusätzliche Informationen
M. Auer, T. Tschurtschenthaler, S. Biffl:
"A flyweight UML modelling tool for software development in heterogeneous environments";
in: "Proc. of Euromicro (EUROMICRO 2003)",
IEEE Computer Society Press,
2003,
ISBN: 0-7695-1996-2,
S. 267
- 272.
Zusätzliche Informationen
S. Biffl, M. Heindl, M. Auer, M. Halling:
"Tool Support for a Risk Management Process - an Empirical Study on Effectiveness and Efficiency";
in: "Proc. of IASTED International Conference on Software Engineering (SE 2004)",
herausgegeben von: M. H. Hamza;
ACTA Press,
2004,
ISBN: 0-88986-410-1,
S. 575
- 580.
F. Ekaputra, M. Sabou, E. Serral Asensio, S. Biffl:
"Supporting Information Sharing for Reuse and Analysis of Scientific Research Publication Data";
in: "Proceedings of the 4th Workshop on Semantic Publishing (Sepublica), co-located with the 11th Extended Semantic Web Conference (ESWC), Volume 1155",
CEUR,
Aachen,
2014,
ISSN: 1613-0073,
Paper-Nr. 06,
12 S.
Zusätzliche Informationen
R. Hametner, D. Winkler, T. Östreicher, N. Surnic, S. Biffl:
"Selecting UML Models for Test-Driven Development along the Automation Systems Engineering Process";
in: "Proceedings IEEE Emerging Technologies and Factory Automation (ETFA 2010)",
IEEE Press,
2010,
ISBN: 978-1-4244-6849-2,
4 S.
A. Lüder, L. Hundt, S. Biffl:
"On the Suitability of Modeling Approaches For Engineering Distributed Control Systems";
in: "7th IEEE International Conference on Industrial Informatics (INDIN 2009)",
herausgegeben von: IEEE;
IEEE Computer Society Press,
2009,
ISBN: 978-1-4244-3760-3,
S. 440
- 445.
Zusätzliche Informationen
F. Rinker, L. Waltersdorfer, M. Schüller, S. Biffl, D. Winkler:
"A Multi-Model Reviewing Approach for Production Systems Engineering Models";
in: "Model-Driven Engineering and Software Development. MODELSWARD 2020. Communications in Computer and Information Science, vol 1361",
Springer,
Schweiz,
2021,
ISBN: 978-3-030-67444-1,
S. 121
- 146.
Zusätzliche Informationen
D. Winkler, R. Hametner, T. Östreicher, S. Biffl:
"A Framework for Automated Testing of Automation Systems";
in: "Proceedings IEEE Emerging Technologies and Factory Automation (ETFA 2010)",
IEEE Press,
2010,
ISBN: 978-1-4244-6849-2,
4 S.
Vorträge und Posterpräsentationen (mit Tagungsband-Eintrag)
R. Abe, M. Beinhart, S. Biffl, E. Kühn, M. Ly, B. Thurnher:
"Need for Rigorous Methods and Tools in Collaborative Mobile Software Solutions - a Use Case Study on a "Travel Service Application"";
Poster: 1st International Symposium on Leveraging Applications of Formal Methods (ISoLA'04),
Cyprus;
30.10.2004
- 02.11.2004; in: "Preliminary Proceedings of the 1st International Symposium on Leveraging Applications of Formal Methods(ISOLA 2004)",
Department of Computer Science, University Cyprus,
TR-2004-6
(2004),
S. 42
- 43.
W. Aigner, S. Miksch, B. Thurnher, S. Biffl:
"PlanningLines: Novel Glyphs for Representing Temporal Uncertainties and their Evaluation";
Vortrag: 9th International Conference on Information Visualisation (IV05),
London, UK;
06.07.2005
- 08.07.2005; in: "Proceedings of the 9th International Conference on Information Visualisation (IV05)",
IEEE Computer Society Press,
(2005),
ISBN: 0-7695-2397-8;
S. 457
- 463.
Zusätzliche Informationen
M. Ali Babar, S. Biffl:
"Eliciting Better Quality Architecture Evaluation Scenarios: A Controlled Experiment On Top-Down vs. Bottom-Up";
Vortrag: ACM-IEEE International Symposium on Empirical Software Engineering,
Rio de Janeiro;
21.09.2006
- 22.09.2006; in: "The International Symposium on Empirical Software Engineering (ISESE) 2006",
ACM Press,
(2006),
ISBN: 1-59593-218-6;
S. 307
- 315.
Zusätzliche Informationen
D. Ameller, X. Franch, C. Gómez, J. Araujo, R. Berntsson Svensson, S. Biffl, J. Cabot, V. Cortellessa, M. Daneva, D. Méndez Fernández, A. Moreira, H. Muccini, A. Vallecillo, M. Wimmer, V. Amaral, H. Brunelière, L. Burgueño, M. Goulão, B. Schätz, S. Teufl:
"Handling Non-functional Requirements in Model-Driven Development: An Ongoing Industrial Survey";
Vortrag: 23rd IEEE International Requirements Engineering Conference (RE 2015),
Ottawa, Canada;
24.08.2015
- 28.08.2015; in: "Proceedings of the 23rd IEEE International Requirements Engineering Conference (RE 2015)",
IEEE Computer Society,
(2015),
S. 1
- 6.
Zusätzliche Informationen
M. Auer, J. Poelz, S. Biffl:
"End-User Development in a Graphical User Interface Setting";
Vortrag: 11th International Conference on Enterprise Information Systems, ICEIS 2009,
Milan, Italy;
06.05.2009
- 10.05.2009; in: "Proceedings of the 11th International Conference on Enterprise Information Systems",
J. Cordeiro, J. Filipe (Hrg.);
Springer,
LNBIP 24
(2009),
ISBN: 978-3-642-01346-1;
S. 5
- 14.
Zusätzliche Informationen
L. Berardinelli, S. Biffl, E. Mätzler, T. Mayerhofer, M. Wimmer:
"Model-Based Co-Evolution of Production Systems and their Libraries with AutomationML";
Vortrag: 20th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2015),
Luxembourg;
08.09.2015
- 11.09.2015; in: "Proceedings of the 20th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2015)",
IEEE,
(2015),
ISBN: 978-1-4673-7929-8;
S. 1
- 8.
Zusätzliche Informationen
S. Biffl:
"Analysis of the Impact of Reading Technique and Inspector Capability on Individual Inspection Performance";
Vortrag: APSEC 2000 Asia-Pacific Software Engineering Conference,
Singapore;
12/2000; in: "Proc. of APSEC 2000 Asia-Pacific Software Engineering Conference",
IEEE Computer Society,
(2000).
S. Biffl:
"Hierarchical Economic Planning of the Inspection Process";
Vortrag: International Conference on Software Engineering (ICSE),
Toronto, Canada;
05/2001; in: "Proc. of the 3rd Int. Workshop on Economics Driven Software Engineering Research (EDSER-3)",
May 2001/Toronto, Canada
(2001).
S. Biffl, M. Ali Babar, D. Winkler:
"Impact of Experience and Team Size on the Quality of Scenarios for Architecture Evaluation";
Vortrag: Conference on Evaluation and Assessment in Software Engineering (EASE),
Bari, Italy;
26.06.2008
- 27.06.2008; in: "Proceedings of the 12th International Conference on Evaluation and Assessment in Software Engineering (EASE)",
G. Visaggio, M. Baldassarre, S. Linkman, M. Turner (Hrg.);
(2008),
S. 1
- 10.
Zusätzliche Informationen
S. Biffl, L. Berardinelli, E. Mätzler, M. Wimmer, A. Lüder, N. Schmidt:
"Model-Based Risk Assessment in Multi-Disciplinary Systems Engineering";
Vortrag: 41st Euromicro Conference Software Engineering and Advanced Applications (SEAA 2015),
Madeira, Portugal;
26.08.2015
- 28.08.2015; in: "Proceedings of the 41st Euromicro Conference Software Engineering and Advanced Applications (SEAA 2015)",
IEEE,
(2015),
ISBN: 978-1-4673-7585-6;
S. 438
- 445.
Zusätzliche Informationen
S. Biffl, F. Ekaputra, A. Lüder, J. Pauly, F. Rinker, L. Waltersdorfer, D. Winkler:
"Technical Debt Analysis in Parallel Multi-Disciplinary Systems Engineering";
Vortrag: 45th Euromicro Conference on Software Engineering and Advanced Applications (SEAA 2019),
Kallithea, Chalkidiki, Greece;
28.08.2019
- 30.08.2019; in: "2019 45th Euromicro Conference on Software Engineering and Advanced Applications (SEAA)",
IEEE,
(2019).
Zusätzliche Informationen
S. Biffl, C. Ferstl, C. Höllwieser, T Moser:
"Evaluation of CASE Tool Methods and Processes - An Analysis of Eight Open-source CASE Tools";
Vortrag: 11th International Conference on Enterprise Information Systems, ICEIS 2009,
Milan, Italy;
06.05.2009
- 10.05.2009; in: "Proceedings of the 11th International Conference on Enterprise Information Systems",
J. Cordeiro, J. Filipe (Hrg.);
Springer,
LNBIP 24
(2009),
ISBN: 978-3-642-01346-1.
Zusätzliche Informationen
S. Biffl, B. Freimut, O. Laitenberger:
"Investigating the Cost-Effectiveness of Reinspections in Software Development";
Vortrag: International Conference on Software Engineering (ICSE),
Toronto, Canada;
05/2001; in: "Proc. of ACM/IEEE International Conference on Software Engineering",
IEEE Comp. Soc. Press,
(2001).
S. Biffl, W. Grossmann:
"Evaluating the Accuracy of Objective Estimation Models Based on Inspection Data From Multiple Inspection Cycles";
Vortrag: International Conference on Software Engineering (ICSE),
Toronto, Canada;
05/2001; in: "Proc. of ACM/IEEE International Conference on Software Engineering",
IEEE Comp. Soc. Press,
(2001).
S. Biffl, W. Gutjahr:
"Influence of Team Size and Defect Detection Methods on Inspection Effectiveness";
Vortrag: IEEE Int. Software Metrics Symposium,
London;
04/2001; in: "Proc. of IEEE Int. Software Metrics Symposium",
IEEE Computer Society,
(2001).
S. Biffl, M. Halling:
"A Value-Based Framework for the Cost-Benefit Evaluation of Software Inspection Processes";
Vortrag: Workshop on Inspection in Software Engineering WISE'01,
Paris, France;
07/2001; in: "Proc. of Workshop on Inspection in Sofware Engineering WISE´01 ( http://www.cas.mcmaster.ca/wise)",
July 2001/Paris, France
(2001).
S. Biffl, M. Halling:
"Investigating Reinspection Decision Accuracy regarding Product-Quality and Cost-Benefit Estimates";
Vortrag: International Computer Software and Applications Conference (COMPSAC),
Chicago, Ill;
10/2001; in: "Proc. of Compsac'01",
IEEE Comp. Soc. Press,
October 2001/Chicago
(2001).
S. Biffl, M. Halling:
"Investigating the Impact of Defect Content Estimation on Reinspection Decision Accuracy";
Vortrag: International Conference on Quality Software (QSIC),
Pittsburgh, US;
10/2001; in: "Proc. of the Int. Conf. on Software Quality",
(2001).
S. Biffl, M. Halling:
"Software Product Improvement with Inspection";
Vortrag: Euromicro 2000 Track on Software Product and Process Improvement,
Maastricht;
09/2000; in: "Proc. of Euromicro 2000 Track on Software Product and Process Improvement",
IEEE Computer Society,
Sept 2000/Maastricht
(2000).
S. Biffl, M. Halling, P. Grünbacher:
"Economic Risk-Based Management in Software Engineering: The Hermes Initiative";
Poster: International Conference on Software Engineering (ICSE),
Portland, Oregon;
05/2003; in: "Proc. of the 5th Int. Workshop on Economics Driven Software Engineering Research (EDSER-5)",
(2003).
S. Biffl, M. Halling, S. Köszegi:
"Investigating the Accuracy of Defect Estimation Models for Individuals and Teams Based on Inspection Data";
Vortrag: ISESE Conference in Rome,
Rome;
30.09.2003
- 01.10.2003; in: "Proceedings of the ISESE Conference in Rome",
Los Alamitos,
(2003),
ISBN: 0-7695-2002-2;
12 S.
S. Biffl, M. Kalinowski, F. Ekaputra, A. Neto, T. Conte, D. Winkler:
"Towards a Semantic Knowledge Base on Threats to Validity and Control Actions in Controlled Experiments";
Vortrag: 8th International Symposium on Empirical Software Engineering and Measurement (ESEM 2014),
Torino, Italien;
18.09.2014
- 19.09.2014; in: "Proceedings of the 8th International Symposium on Empirical Software Engineering and Measurement (ESEM)",
ACM,
(2014),
ISBN: 978-1-4503-2774-9.
Zusätzliche Informationen
S. Biffl, M. Kalinowski, F. Ekaputra, E. Serral Asensio, D. Winkler:
"Building Empirical Software Engineering Bodies of Knowledge with Systematic Knowledge Engineering";
Vortrag: 26th International Conference on Software Engineering and Knowledge Engineering (SEKE 2014),
Vancouver, Canada;
01.07.2014
- 02.07.2014; in: "Proceedings of the 26th International Conference on Software Engineering and Knowledge Engineering (SEKE)",
Knowledge Systems Institute Graduate School,
(2014),
ISBN: 1-891706-35-7;
S. 552
- 559.
Zusätzliche Informationen
S. Biffl, M. Kalinowski, D. Winkler:
"Towards an Experiment Line on Software Inspection with Human Computation";
Vortrag: 6th International Workshop on Conducting Empirical Studies in Industry (CESI),
Gothenburg, Sweden;
28.05.2018; in: "Proceedings of the 6th International Workshop on Conducting Empirical Studies in Industry (CESI), in conjunction with the 40th International Conference on Software Engineering (ICSE)",
IEEE,
(2018),
ISBN: 978-1-4503-5736-4;
S. 21
- 24.
Zusätzliche Informationen
S. Biffl, L. Kathrein, A. Lüder, K. Meixner, R. Sabou, L. Waltersdorfer, D. Winkler:
""Software Engineering Risks from Technical Debt in the Representation of Product/ion Knowledge "";
Vortrag: 31st International Conference on Software Engineering & Knowledge Engineering (SEKE 2019),
Lisbon, Portugal;
10.07.2019
- 12.07.2019; in: "Proceedings SEKE 2019",
KSI Research Inc. and Knowledge Systems Institute Graduate School,
(2019),
ISBN: 1-891706-48-9.
Zusätzliche Informationen
S. Biffl, O. Kovalenko, A. Lüder, N. Schmidt, R. Rosendahl:
"Semantic Mapping Support for Mechatronic Objects in AutomationML";
Vortrag: AutomationML User Conference,
Blomberg, Germany;
07.10.2014
- 08.10.2014; in: "Proceedings of the AutomationML User Conference",
(2014),
13 S.
Zusätzliche Informationen
S. Biffl, O. Kovalenko, A. Lüder, N. Schmidt, R. Rosendahl:
"Semantic Mapping Support in AutomationML";
Vortrag: 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA),
Barcelona, Spain;
16.09.2014
- 19.09.2014; in: "Proceedings of the 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)",
IEEE,
(2014),
ISBN: 978-1-4799-4845-1.
Zusätzliche Informationen
S. Biffl, A. Lüder, E. Mätzler, N. Schmidt, M. Wimmer:
"Linking and Versioning Support for AutomationML: A Model‐Driven Engineering Perspective";
Vortrag: 2015 IEEE International Conference on Industrial Informatics (INDIN 2015),
Cambridge;
22.07.2015
- 24.07.2015; in: "Proceedings of 2015 IEEE International Conference on Industrial Informatics (INDIN 2015)",
IEEE,
(2015),
ISBN: 978-1-4799-6649-3;
S. 499
- 506.
Zusätzliche Informationen
S. Biffl, A. Lüder, K. Meixner, F. Rinker, M. Eckhart, D. Winkler:
"Multi-View Model Risk Assessment in Cyber-Physical Production Systems Engineering";
Vortrag: 9th International Conference on Model-Driven Engineering and Software Development (MODELSWARD 2021) - Online Conference,
Vienna, Austria;
08.02.2021
- 10.02.2021; in: "Proceedings of the 9th International Conference on Model-Driven Engineering and Software Development, Modelswards, Volume 1, MODELSWARD",
SCITEPRESS,
(2021),
ISBN: 978-989-758-487-9.
Zusätzliche Informationen
S. Biffl, A. Lüder, F. Rinker, L. Waltersdorfer:
"Efficient Engineering Data Echange in Multi-Disciplinary Systems Engineering";
Vortrag: CAISE 2019,
Rom, Italien;
03.06.2019
- 07.06.2019; in: "Advanced Information Systems Engineering",
Springer,
(2019),
ISBN: 978-3-030-21289-6;
S. 17
- 31.
Zusätzliche Informationen
S. Biffl, A. Lüder, F. Rinker, L. Waltersdorfer, D. Winkler:
"Quality Risks in the Data Exchange Process for Collaborative CPPS Engineering";
Vortrag: 17th IEEE International Conference on Industrial Informatics (INDIN 2019),
Helsinki, Finland;
22.07.2019
- 25.07.2019; in: "Proceedings of INDIN 2019",
IEEE,
(2019).
Zusätzliche Informationen
S. Biffl, A. Lüder, N. Schmidt, D. Winkler:
"Early and Efficient Quality Assurance of Risky Technical Parameters in a Mechatronic Design Process";
Vortrag: 40th Annual Conference of the IEEE Industrial Electronics Society (IECON 2014),
Dallas, Texas;
28.10.2014
- 01.11.2014; in: "Proceedings of the 40th Annual Conference of the IEEE Industrial Electronics Society (IECON 2014)",
IEEE,
(2014).
Zusätzliche Informationen
S. Biffl, K. Meixner, D. Winkler, A. Lüder:
"Towards Efficient Asset-Based Configuration Management with a PPR Asset Directory";
Vortrag: 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA),
Västerås, Sweden;
07.09.2021
- 10.09.2021; in: "Proceedings 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)",
(2021),
ISBN: 978-1-6654-2478-3.
Zusätzliche Informationen
S. Biffl, R. Mordinyi, T Moser:
"Automated Derivation of Configurations for the Integration of Software(+) Engineering Environments";
Vortrag: 1st International Workshop on Automated Configuration and Tailoring of Applications (ACoTA 2010),
Antwerp Belgium;
20.09.2010; in: "Proc. 1st International Workshop on Automated Configuration and Tailoring of Applications (ACoTA 2010)",
(2010),
S. 6
- 13.
Zusätzliche Informationen
S. Biffl, R. Mordinyi, T Moser, D. Wahyudin:
"Ontology-supported quality assurance for component-based systems configuration";
Vortrag: 6th international Workshop on Software Quality,
Leipzig, Germany;
10.05.2008
- 18.05.2008; in: "Proceedings of 6th international Workshop on Software Quality",
B. Wong (Hrg.);
ACM,
New York
(2008),
ISBN: 978-1-60558-023-4;
S. 59
- 64.
Zusätzliche Informationen
S. Biffl, R. Mordinyi, G. Raidl, H. Steininger, D. Winkler:
"An SME Transition from Plan-Driven to Hybrid Project Management with Agile Software Development Methods";
Vortrag: 21th EuroSPI Conference on Systems Software and Service Process Improvement, Industrial Track,
Luxembourg, Luxemburg;
25.06.2014
- 27.06.2014; in: "Proceedings of the 21th EuroSPI Conference on Systems Software and Service Process Improvement, Industrial Track",
Delta,
(2014),
ISBN: 978-87-7398-157-3.
Zusätzliche Informationen
S. Biffl, R. Mordinyi, A. Schatten:
"A Model-Driven Architecture Approach Using Explicit Stakeholder Quality Requirement Models for Building Dependable Information Systems";
Vortrag: Workshop on Software Quality,
Minneapolis, MN, USA;
20.05.2007
- 26.05.2007; in: "Fifth International Workshop on Software Quality (WoSQ'07: ICSE Workshops 2007)",
IEEE Computer Society,
Los Alamitos, CA, USA
(2007),
ISBN: 0-7695-2959-3.
Zusätzliche Informationen
S. Biffl, J. Musil, A. Musil, K. Meixner, A. Lüder, F. Rinker, D. Weyns, D. Winkler:
"An Industry 4.0 Asset-Based Coordination Artifact for Production Systems Engineering";
Vortrag: 23rd IEEE International Conference on Business Informatics,
Dolomites, South Tyrol;
01.09.2021
- 03.09.2021; in: "IEEE International Conference on Business Informatics (CBI)",
IEEE,
(2021),
ISBN: 978-1-6654-2069-3;
S. 92
- 101.
Zusätzliche Informationen
S. Biffl, J. Musil, E. Serral Asensio, D. Winkler:
"A Semantic Directory for Content and Partner Discovery in Empirical Software Engineering Research";
Vortrag: 39th Euromicro Conference on Software Engineering and Advanced Applications (SEAA),
Santander, Spain;
04.09.2013
- 06.09.2013; in: "Proceedings of the Work in Progress Session",
SEA-Publications,
(2013),
ISBN: 978-3-902457-387;
S. 17
- 18.
S. Biffl, A. Schatten:
"A Platform for Service-Oriented Integration of Software Engineering Environments";
Hauptvortrag: 8th International Conference on Software Methodologies, Tools and Techniques (SOMET 09),
Prague, Czech Republic;
23.09.2009
- 25.09.2009; in: "Proceedings of the 8th International Conference on Software Methodologies, Tools and Techniques (SOMET 09)",
Proceedings of the 8th International Conference on Software Methodologies, Tools and Techniques (SOMET 09),
(2009),
ISSN: 0922-6389;
S. 75
- 92.
Zusätzliche Informationen
S. Biffl, A. Schatten, A. Zoitl:
"Integration of Heterogeneous Engineering Environments for the Automation Systems Lifecycle";
Vortrag: IEEE International Conference on Industrial Informatics (INDIN),
Cardiff, UK;
24.06.2009
- 26.06.2009; in: "INDIN 2009 7th International Conference on Industrial Informatics",
IEEE,
(2009),
ISBN: 978-1-4244-3760-3;
6 S.
S. Biffl, E. Serral Asensio, D. Winkler, O. Dieste, N. Juristo, N. Condori-Fernández:
"Replication Data Management: Needs and Solutions - An initial evaluation of conceptual approaches for integrating heterogeneous replication study data";
Vortrag: 7th International Symposium on Empirical Software Engineering and Measurement,
Baltimore, Maryland, USA;
10.10.2013
- 11.10.2013; in: "ACM / IEEE International Symposium on Empirical Software Engineering and Measurement, 2013",
IEEE,
(2013),
ISBN: 978-0-7695-5056-5;
S. 233
- 242.
Zusätzliche Informationen
S. Biffl, W. Sunindyo, T Moser:
"A Project Monitoring Cockpit Based On Integrating Data Sources in Open Source Software Development";
Vortrag: Twenty-Second International Conference on Software Engineering and Knowledge Engineering (SEKE 2010),
San Fransisco Bay, USA;
01.07.2010
- 03.07.2010; in: "Proc. Twenty-Second International Conference on Software Engineering and Knowledge Engineering (SEKE 2010)",
(2010),
ISBN: 1-891706-26-8;
S. 620
- 627.
Zusätzliche Informationen
S. Biffl, W. Sunindyo, T Moser:
"Bridging Semantic Gaps Between Stakeholders in the Production Automation Domain with Ontology Areas";
Vortrag: 21st International Conference on Software Engineering & Knowledege Engineering,
Hyatt Harborside Hotel, Boston, Massachusetts, USA;
01.07.2009
- 03.07.2009; in: "Proceedings The 21st International Conference on Software Engineering & Knowledge Engineering (SEKE 2009)",
USA
(2009),
ISBN: 1-891706-24-1;
S. 233
- 239.
S. Biffl, W. Sunindyo, T Moser:
"Semantic Integration of Heterogeneous Data Sources for Monitoring Frequent-Release Software Projects";
Vortrag: 4th International Conference on Complex, Intelligent and Software Intensive Systems (CISIS 2010),
Krakow, Poland;
15.02.2010
- 18.02.2010; in: "Proceedings of the 4th International Conference on Complex, Intelligent and Software Intensive Systems (CISIS 2010)",
L. Barolli, F. Xhafa, S. Vitabile, H. Hsu (Hrg.);
IEEE Computer Society,
(2010),
ISBN: 978-0-7695-3967-6;
8 S.
Zusätzliche Informationen
S. Biffl, B. Thurnher, G. Goluch, D. Winkler, W. Aigner, S. Miksch:
"An Empirical Investigation on the Visualization of Temporal Uncertainties in Software Engineering Project Planning";
Vortrag: 2005 International Symposium on Empirical Software Engineering,
Australia;
17.11.2005
- 18.11.2005; in: "Empirical Software Engineering, 2005",
IEEE Society Press,
(2005),
ISBN: 0-7803-9508-5;
S. 437
- 446.
S. Biffl, D. Winkler, R Höhn, H Wetzel:
"Software Process Improvement in Europe: Potential of the new V-Model XT and Research Issues";
Vortrag: EuroSPI 2005 Experience Session,
Budapest, Hungary;
09.11.2005
- 11.11.2005; in: "Proceeding of EuroSPI 2005 Experience Sessions",
M. Biro, R. Messnarz, J. von Neumann (Hrg.);
Computer Society,
11
(2006),
ISBN: 963-8431-94-6;
S. 9
- 19.
Zusätzliche Informationen
S. Biffl, D. Winkler, R. Mordinyi, S. Scheiber, G. Holl:
"Efficient Monitoring of Constraints in a Multi-Disciplinary Engineering Project with Semantic Data Integration in the Multi-Model Dashboard Process";
Vortrag: 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA),
Barcelona, Spain;
16.09.2014
- 19.09.2014; in: "Proceedings of the 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)",
IEEE,
(2014),
ISBN: 978-1-4799-4845-1;
S. 1
- 10.
Zusätzliche Informationen
G. Carneiro, R. Laigner, M. Kalinowski, D. Winkler, S. Biffl:
"Investigating the Influence of Inspector Learning Styles on Design Inspections: Findings of a Quasi-Experiment";
Vortrag: 20th Ibero-American Conference on Software Engineering, Experimental Software Engineering (ESELAW) Track,
Buenos Aires, Argentina;
22.05.2017
- 23.05.2017; in: "Proceedings of the 20th Ibero-American Conference on Software Engineering, Experimental Software Engineering (ESELAW) Track",
IEEE,
(2017),
ISBN: 978-987-3806-98-8;
S. 222
- 235.
Zusätzliche Informationen
O. Daramola, T Moser, G. Sindre, S. Biffl:
"Managing Implicit Requirements Using Semantic Case-Based Reasoning Research Preview";
Vortrag: 18th International Working Conference (REFSQ 2012),
Essen, Germany;
19.03.2012
- 22.03.2012; in: "Requirements Engineering: Foundation for Software Quality - 18th International Working Conference, REFSQ 2012, Essen, Germany, March 19-22, 2012. Proceedings",
Springer,
(2012),
ISBN: 978-3-642-28713-8;
S. 172
- 178.
Zusätzliche Informationen
O. Daramola, T. Stalhane, T Moser, S. Biffl:
"A Conceptual Framework for Semantic Case-based Safety Analysis";
Vortrag: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011),
Toulouse, France;
05.09.2011
- 09.09.2011; in: "Proceeding of 16th IEEE International Conference on Emerging Technologies and Factory Automation",
Z. Mammeri (Hrg.);
(2011),
ISBN: 978-1-4577-0018-7;
S. 1
- 8.
Zusätzliche Informationen
D. Dhungana, I. Groher, E. Schludermann, S. Biffl:
"Software Ecosystems vs. Natural Ecosystems: Learning from the Ingenious Mind of Nature";
Vortrag: Second Workshop on Software Ecosystems,
Copenhagen, Denmark;
23.08.2010
- 26.08.2010; in: "Proc. Second Workshop on Software Ecosystems",
I. Gorton, C. Cuesta, M. Ali Babar (Hrg.);
ACM,
(2010),
ISBN: 978-1-4503-0179-4;
S. 96
- 102.
Zusätzliche Informationen
S. Dösinger, R. Mordinyi, S. Biffl:
"Communicating Continuous Integration Servers for Increasing Effectiveness of Automated Testing";
Vortrag: IEEE/ACM International Conference on Automated Software Engineering,
Essen, Germany;
03.09.2012
- 07.09.2012; in: "Proceedings of 27th IEEE/ACM International Conference on Automated Software Engineering (ASE)",
(2012),
S. 374
- 377.
Zusätzliche Informationen
M. Eckhart, A. Ekelhart, A. Lüder, S. Biffl, E. Weippl:
"Security Development Lifecycle for Cyber-Physical Production Systems";
Vortrag: 45th Annual Conference of the IEEE Industrial Electronics Society (IECON 2019),
Lisbon, Portugal, Portugal;
14.10.2019
- 18.10.2019; in: "IEEE",
IEEE,
(2019),
ISBN: 978-1-7281-4878-6.
Zusätzliche Informationen
A. Egyed, S. Biffl, M. Heindl, P. Grünbacher:
"A Value-Based Approach for Understanding Cost-Benefit Trade-Offs During Automated Software Traceability";
Vortrag: The 3rd ACM International Workshop on Traceability in Emerging Forms of Software Engineering (TEFSE 2005),
Long Beach, California;
08.11.2005; in: "The Proceedings of the 3rd ACM International Workshop on Traceability in Emerging Forms of Software Engineering",
ACM Press,
(2005),
ISBN: 1-59593-243-7;
S. 2
- 7.
A. Egyed, S. Biffl, M. Heindl, P. Grünbacher:
"Determining the Cost-Quality Trade-Off for Automated Software Traceability";
Vortrag: The 20th IEEE/ACM International Conference on Automated Software Engineering,
Long Beach, California;
07.11.2005
- 11.11.2005; in: "The 20th IEEE/ACM International Conference on Automated Software Engineering",
ACM Press,
(2005),
ISBN: 1-58113-993-4;
S. 360
- 363.
A. Egyed, P. Grünbacher, S. Biffl:
"Value-Based Requirements Traceability: Lessons Learned";
Vortrag: Joint International Requirements Engineering Conference (RE),
New Delhi India;
15.10.2007
- 19.10.2007; in: "RE'07: 15th IEEE International Requirements Engineering Conference",
IEEE,
New Delhi
(2007),
ISSN: 1090-705x;
S. 266
- 274.
Zusätzliche Informationen
F. Ekaputra, R. Sabou, E. Serral Asensio, S. Biffl:
"Collaborative Exchange of Systematic Literature Review Results: The Case of Empirical Software Engineering";
Poster: 24th International Conference on World Wide Web, WWW 2015,
Florence;
18.05.2015
- 22.05.2015; in: "Proceeding WWW '15 Companion Proceedings of the 24th International Conference on World Wide Web",
ACM,
(2015),
ISBN: 978-1-4503-3473-0;
S. 1055
- 1056.
Zusätzliche Informationen
F. Ekaputra, R. Sabou, E. Serral Asensio, S. Biffl:
"Knowledge Change Management and Analysis for Multi-Disciplinary Engineering Environments";
Poster: CEUR,
Wien;
15.09.2015
- 17.09.2015; in: "CEUR Workshop Proceedings",
CEUR,
(2015),
ISSN: 1613-0073;
S. 13
- 17.
Zusätzliche Informationen
F. Ekaputra, E. Serral Asensio, S. Biffl:
"Building an Empirical Software Engineering Research Knowledge Base from Heterogeneous Data Sources";
Vortrag: 14th International Conference on Knowledge Technologies and Data-Driven Business (I-KNOW),
Graz;
16.09.2014
- 19.09.2014; in: "Proceedings of the 14th International Conference on Knowledge Technologies and Data-Driven Business (I-KNOW)",
ACM,
(2014),
ISBN: 978-1-4503-2769-5.
Zusätzliche Informationen
F. Ekaputra, E. Serral Asensio, D. Winkler, S. Biffl:
"An analysis framework for ontology querying tools";
Vortrag: 9th International Conference on Semantic Systems (I-SEMANTICS 2013),
Graz;
04.09.2013
- 06.09.2013; in: "Proceedings of the 9th International Conference on Semantic Systems, I-SEMANTICS 2013",
ACM,
(2013),
ISBN: 978-1-4503-1972-0;
S. 1
- 8.
Zusätzliche Informationen
A. Fay, S. Biffl, D. Winkler, R. Drath, M. Barth:
"A method to evaluate the openness of automation tools for increased interoperability";
Vortrag: 39th Annual Conference of the IEEE Industrial Electronics Society (IECON),
Vienna;
10.11.2013
- 13.11.2013; in: "Proceedings of the 39th Annual Conference of the IEEE Industrial Electronics Society (IECON)",
IEEE,
(2013),
ISBN: 978-1-4799-0223-1;
S. 6842
- 6847.
Zusätzliche Informationen
K. Feichtinger, K. Meixner, R. Rabiser, S. Biffl:
"A Systematic Study as Foundation for a Variability Modeling Body of Knowledge";
Vortrag: 47th Euromicro Conference on Software Engineering and Advanced Applications (SEAA),
Palermo, Italy;
01.09.2021
- 03.09.2021; in: "2021 47th Euromicro Conference on Software Engineering and Advanced Applications (SEAA)",
IEEE,
(2021),
ISBN: 978-1-6654-2705-0.
Zusätzliche Informationen
K. Feichtinger, K. Meixner, R. Rabiser, S. Biffl:
"Variability Transformation from Industrial Engineering Artifacts: An Example in the Cyber-Physical Production Systems Domain";
Vortrag: Online Conference 24th ACM International Systems and Software Product Line Conference (SPLC 2020),
Montreal, Canada;
19.10.2020
- 23.10.2020; in: "Proceedings of the 24th ACM International Systems and Software Product Line Conference - Volume B, Doctoral Symposium",
ACM,
(2020),
ISBN: 978-1-4503-7570-2;
S. 65
- 73.
Zusätzliche Informationen
M. Felderer, D. Winkler, S. Biffl:
"Hybrid Software and System Development in Practice: Initial Results from Austria";
Vortrag: 18th International Conference on Product-Focused Software Process Improvement (PROFES), 2nd Workshop on Hybrid Development Approaches in Software Systems Development (HELENA),
Innsbruck;
29.11.2017
- 01.12.2017; in: "Proceedings of the 18th International Conference of Product-Focused Software Process Improvement, Lecture Notes in Computer Science, LNCS, Volume 10611",
Springer,
10611
(2017),
ISBN: 978-3-319-69925-7;
S. 435
- 442.
Zusätzliche Informationen
B. Freimut, O. Laitenberger, S. Biffl:
"Investigating the Impact of Reading Techniques on the Accuracy of Different Defect Content Estimation Techniques";
Vortrag: IEEE Int. Software Metrics Symposium,
London, UK;
04/2001; in: "Proc. of IEEE Int. Software Metrics Symposium",
IEEE Comp. Soc. Press,
(2001).
C. Frühwirth, S. Biffl, A. Schatten, S. Schrittwieser, E. Weippl, W. Sunindyo:
"Research Challenges in the Security Design and Evaluation of an Engineering Service Bus Platform";
Vortrag: 36th EUROMICRO Conference on Software Engineering and Advanced Applications (SEAA) - Work in Progress Session,
Lille, France;
01.09.2010
- 03.09.2010; in: "Proc. 36th EUROMICRO Conference on Software Engineering and Advanced Applications (SEAA) - Work in Progress Session",
E. Grosspietsch, K. Klöckner (Hrg.);
(2010),
ISBN: 978-3-902457-27-1;
S. 1
- 2.
C. Frühwirth, S. Biffl, A. Schatten, D. Winkler, W. Sunindyo:
"Quantitative Software Security Measurement in an Engineering Service Bus Platform";
Poster: 4th International Symposium on Empirical Software Engineering and Measurement (ESEM 2010) - Poster Sessions,
Bolzano-Bozen, Italy;
15.09.2010
- 17.09.2010; in: "Proc. 4th International Symposium on Empirical Software Engineering and Measurement (ESEM 2010) - Poster Sessions",
G. Succi, M. Morisio, N. Nagappan (Hrg.);
(2010),
ISBN: 978-1-4503-0039-1;
S. 1
- 2.
Zusätzliche Informationen
C. Frühwirth, S. Biffl, M. Tabatabai Irani, E. Weippl:
"Addressing Misalignment Between Information Security Metrics and Business-Driven Security Objectives";
Vortrag: International Workshop on Security Measurement and Metrics (MetriSec),
Bolzano-Bozen, Italy;
15.09.2010; in: "Proc. International Workshop on Security Measurement and Metrics (MetriSec)",
G. Succi, M. Morisio, N. Nagappan (Hrg.);
(2010),
ISBN: 978-1-4503-0039-1;
S. 1
- 7.
Zusätzliche Informationen
C. Frühwirth, R. Mordinyi, S. Biffl:
"Quality Needs Structure: Industrial Experiences in Systematically Defining Software Security Requirements";
Vortrag: Software Quality Days 2012,
Vienna, Austria;
17.01.2012
- 19.01.2012; in: "Lecture Notes in Business Information Processing, Software Quality. Process Automation in Software Development",
Springer-Verlag Berlin Heidelberg,
(2012),
ISBN: 978-3-642-27212-7;
S. 217
- 229.
Zusätzliche Informationen
A. Grünwald, D. Winkler, M. Sabou, S. Biffl:
"The Semantic Model Editor: Efficient Data Modeling and Integration based on OWL Ontologies";
Vortrag: 10th International Semantic Systems (SEMANTIC),
Leipzig, Germany;
04.09.2014
- 05.09.2014; in: "Proceedings of the 10th International Semantic Systems (SEMANTIC)",
ACM,
(2014),
ISBN: 978-1-4503-2927-9.
Zusätzliche Informationen
A. Grünwald, D. Winkler, E. Serral Asensio, S. Biffl:
"Semantic Technologies to Accelerate Model-Driven Development";
Vortrag: 39th Euromicro Conference on Software Engineering and Advanced Applications (SEAA),
Santander, Spain;
04.09.2013
- 06.09.2013; in: "Proceedings of the Work in Progress Session",
SEA-Publications,
(2013),
ISBN: 978-3-902457-387;
S. 15
- 16.
M. Halling, P. Grünbacher, S. Biffl:
"Groupware Support for Software Requirements Inspection";
Vortrag: Workshop on Inspection in Software Engineering WISE'01,
Paris, France;
07/2001; in: "Proc. of Workshop on Inspection in Sofware Engineering WISE´01 ( http://www.cas.mcmaster.ca/wise)",
July 2001/Paris, France
(2001).
M. Halling, P. Grünbacher, S. Biffl:
"Tailoring a COTS Group Support System for Software Requirements Inspection";
Vortrag: IEEE International Conference on Automated Software Engineering (ASE),
San Diego, CA;
2001; in: "Proc of the ACM/IEEE Conf. on Automated Software Engineering '01",
IEEE Computer Society,
(2001).
R. Hametner, D. Winkler, T. Östreicher, S. Biffl, A. Zoitl:
"The Adaption of Test-Driven Software Processes to Industrial Automation Engineering";
Vortrag: IEEE International Conference on Industrial Informatics (INDIN),
Osaka, Japan;
13.07.2010
- 16.07.2010; in: "Proceedings INDIN 2010 - 8th IEEE International Conference on Industrial Informatics",
(2010),
ISBN: 978-1-4244-7299-4;
7 S.
M. Heindl, S. Biffl:
"A Case Study on Value-Based Requirements Tracing";
Vortrag: 10th European Software Engineering Conference,
Lisbon, Portugal;
05.09.2005
- 09.09.2005; in: "Proceedings of the 10th European Software Engineering Conference",
ACM,
(2005),
ISBN: 1-59593-014-0;
S. 60
- 69.
M. Heindl, S. Biffl:
"A Framework to Balance Tracing Agility and Formalism";
Vortrag: IFIP CEE Software Engineering Techniques Conference,
Poznan Poland;
10.10.2007
- 14.10.2007; in: "Proceeding of CEE-SET 2007",
Springer,
Poznan
(2007),
S. 259
- 270.
Zusätzliche Informationen
M. Heindl, S. Biffl:
"Risk Management with Enhanced Tracing of Requirements Rationale in Highly Distributed Projects";
Vortrag: International Conference on Software Engineering (ICSE),
Shanghai;
20.05.2006
- 28.05.2006; in: "First International Workshop on Global Software Development for the Practitioner at the Int. Conf. on Software Engineering",
ACM,
NY
(2006),
ISBN: 1-59593-375-1;
S. 20
- 26.
Zusätzliche Informationen
M. Heindl, S. Biffl, A. Egyed:
"The Impact of Trace Correctness on Requirements Tracing Cost-Benefit - An Evaluation Concept";
Vortrag: ACM-IEEE International Symposium on Empirical Software Engineering,
Rio de Janeiro;
21.09.2006
- 22.09.2006; in: "5th ACM-IEEE International Symposium on Empirical Software Engineering",
ACM Press,
Vol 2, NY
(2006),
ISBN: 1-59593-218-6;
S. 51
- 53.
Zusätzliche Informationen
M. Heindl, S. Biffl, A. Egyed:
"Value-Based Selection of Requirements Engineering Tool Support";
Vortrag: Euromicro International Conference,
Dubrovnik, Croatia;
29.08.2006
- 01.09.2006; in: "Software Engineering and Advanced Applications,2006, 32nd EUROMICRO Conference",
IEEE Computer Society,
California, USA
(2006),
ISBN: 0-7695-2594-6;
S. 266
- 273.
Zusätzliche Informationen
M. Heindl, F Reinisch, S. Biffl:
"Requirements Management Infrastructures in Global Software Development - Towards Application Lifecycle Management with Role-based In-time Notification";
Vortrag: International Conference of Global Software Engineering (ICGSE),
Munich;
27.08.2007
- 30.08.2007; in: "International Conference on Global Software Engineering (ICGSE), Workshop on Tool-Supported Requirements Management in Distributed Projects (REMIDI)",
REMIDI, ICGSE,
Munich
(2007),
S. #
- #.
Zusätzliche Informationen
K. John, D. Winkler, S. Biffl:
"Improving Company Processes by applying a Light-weight Process Approach based on the SPICE Maturity Model";
Vortrag: 16th Interdisciplinary Information Management Talks,
Jidrichuv Hradec (Neuhaus), Czech Republic;
10.09.2008
- 12.09.2008; in: "Proceedings of the 16th Interdisciplinary Information Management Talks",
Trauner Verlag,
(2008),
ISBN: 978-3-85499-448-0;
S. 223
- 236.
Zusätzliche Informationen
L. Kathrein, A. Lüder, K. Meixner, D. Winkler, S. Biffl:
"Efficient Production System Resource Exploration Considering Product/ion Requirements";
Vortrag: 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2019),
Zaragoza, Spain;
10.09.2019
- 13.09.2019; in: "Proceedings of the 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2019)",
IEEE,
(2019),
ISBN: 978-1-7281-0304-4.
Zusätzliche Informationen
L. Kathrein, A. Lüder, K. Meixner, D. Winkler, S. Biffl:
"Extending the Formal Process Description towards Consistency in Product/ion-Aware Modeling";
Vortrag: 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2019),
Zaragoza, Spain;
10.09.2019
- 13.09.2019; in: "Proceedings of the 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2019)",
IEEE,
(2019),
ISBN: 978-1-7281-0304-4.
Zusätzliche Informationen
L. Kathrein, A. Lüder, K. Meixner, D. Winkler, S. Biffl:
"Product/ion-Aware Analysis of Multi-Disciplinary Systems Engineering Processes";
Vortrag: 21st International Conference on Enterprise Information System, ICEIS 2019,
Heraklion, Greece;
03.05.2019
- 05.05.2019; in: "Proceedings of the 21st International Conference on Enterprise Information Systems",
SciTePress,
(2019),
ISBN: 978-989-758-372-8;
S. 48
- 60.
Zusätzliche Informationen
L. Kathrein, A. Lüder, K. Meixner, D. Winkler, S. Biffl:
"Product/ion-Aware Modeling Approaches that Support Tracing Design Decisions";
Vortrag: 17th IEEE International Conference on Industrial Informatics (INDIN 2019),
Helsinki, Finland;
22.07.2019
- 25.07.2019; in: "Proceedings of INDIN 2019",
IEEE,
(2019).
Zusätzliche Informationen
L. Kathrein, K. Meixner, D. Winkler, A. Lüder, S. Biffl:
"A Meta-Model for Representing Consistency as Extension to the Formal Process Description";
Vortrag: 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2019),
Zaragoza, Spain;
10.09.2019
- 13.09.2019; in: "Proceedings of the 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2019)",
IEEE,
(2019),
ISBN: 978-1-7281-0304-4;
S. 1653
- 1656.
Zusätzliche Informationen
G. Kiechle, K. Dörner, S. Biffl:
"Strategies to Support Ambulance Scheduling with Efficient Routing Services";
Vortrag: Business Informatics Conference,
Vienna;
25.02.2009
- 27.02.2009; in: "Proceedings of Business Informatics Conference",
(2009),
S. 1
- 10.
Zusätzliche Informationen
O. Kovalenko, C. Debruyne, E. Serral Asensio, S. Biffl:
"Evaluation of Technologies for Mapping Representation in Ontologies";
Vortrag: On The Move 2013 (OTM 2013),
Graz;
09.09.2013
- 13.09.2013; in: "On the Move to Meaningful Internet Systems: OTM 2013 Conferences",
Springer Berlin Heidelberg,
(2013),
ISBN: 978-3-642-41029-1;
S. 564
- 571.
Zusätzliche Informationen
O. Kovalenko, E. Serral Asensio, S. Biffl:
"Towards evaluation and comparison of tools for ontology population from spreadsheet data";
Vortrag: 9th International Conference on Semantic Systems (I-SEMANTICS 2013),
Graz;
04.09.2013
- 06.09.2013; in: "Proceedings of the 9th International Conference on Semantic Systems, I-SEMANTICS 2013",
ACM,
(2013),
ISBN: 978-1-4503-1972-0;
S. 57
- 64.
Zusätzliche Informationen
O. Kovalenko, E. Serral Asensio, M. Sabou, F. Ekaputra, D. Winkler, S. Biffl:
"Automating Cross-Disciplinary Defect Detection in Multi-Disciplinary Engineering Environments";
Vortrag: 19th Conference on Knowledge Engineering and Knowledge Management (EKAW),
Linköping,Sweden;
24.11.2014
- 28.11.2014; in: "Knowledge Engineering and Knowledge Management",
Springer,
(2014),
ISBN: 978-3-319-13703-2.
Zusätzliche Informationen
O. Kovalenko, M. Wimmer, R. Sabou, A. Lüder, F. Ekaputra, S. Biffl:
"Modeling AutomationML: Semantic Web Technologies vs. Model-Driven Engineering";
Vortrag: 20th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2015),
Luxembourg;
08.09.2015
- 11.09.2015; in: "Proceedings of the 20th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2015)",
IEEE,
(2015),
ISBN: 978-1-4673-7929-8;
S. 1
- 4.
Zusätzliche Informationen
O. Kovalenko, D. Winkler, M. Kalinowski, E. Serral Asensio, S. Biffl:
"Engineering Process Improvement in Heterogeneous Multi-Disciplinary Environments with the Defect Causal Analysis";
Vortrag: 21th EuroSPI Conference on Systems Software and Service Process Improvement, Industrial Track,
Luxembourg, Luxemburg;
25.06.2014
- 27.06.2014; in: "Proceedings of the 21th EuroSPI Conference on Systems Software and Service Process Improvement, Communication in Computer and Information Science",
Springer,
(2014),
ISBN: 978-3-662-43895-4;
S. 73
- 85.
Zusätzliche Informationen
T. Kremmel, J. Kubalik, S. Biffl:
"Multiobjective Evolutionary Algorithm for Software Project Portofolio Optimization";
Vortrag: Proc. Genetic and Evolutionary Computation Conference (Gecco 2010) - Poster Session,
Portland, Oregon;
07.07.2010
- 11.07.2010; in: "Proc. Genetic and Evolutionary Computation Conference (Gecco 2010) - Poster Session",
(2010),
S. 1
- 2.
Zusätzliche Informationen
S. Kropatschek, T. Steuer, E. Kiesling, K. Meixner, T. Frühwirth, P. Sommer, D. Schachinger, S. Biffl:
"Towards the Representation of Cross-Domain Quality Knowledge for Efficient Data Analytics";
Vortrag: 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA),
Västerås, Sweden;
07.09.2021
- 10.09.2021; in: "Proceedings 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)",
(2021),
ISBN: 978-1-6654-2478-3.
Zusätzliche Informationen
J. Kubalik, R. Mordinyi, S. Biffl:
"Multiobjective Prototype Optimization with Evolved Improvement Steps";
Vortrag: 8th European Conference, EvoCOP 2008,
Naples, Italy;
26.03.2008
- 28.03.2008; in: "Evolutionary Computation in Combinatorial Optimization",
LNCS/Springer Berlin,
4972/2008/ Heidelberg
(2008),
ISSN: 0302-9743;
S. 218
- 229.
Zusätzliche Informationen
A. Lüder, L. Baumann, A. Behnert, F. Rinker, S. Biffl:
"Paving Pathways for Digitalization in Engineering: Common Concepts in Engineering Chains";
Vortrag: 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA),
Vienna, Austria;
08.09.2020
- 11.09.2020; in: "Proceedings of 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)",
(2020),
S. 1401
- 1404.
Zusätzliche Informationen
A. Lüder, A. Behnert, F. Rinker, S. Biffl:
"Generating Industry 4.0 Asset Administration Shells with Data from Engineering Data Logistics";
Vortrag: 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA),
Vienna, Austria;
08.09.2020
- 11.09.2020; in: "Proceedings of the 25th International Conference on Emerging Technologies and Factory Automation (ETFA)",
IEEE,
(2020),
S. 867
- 874.
Zusätzliche Informationen
A. Lüder, K. Kirchheim, J. Pauly, S. Biffl, F. Rinker, L. Waltersdorfer:
"Supporting the Data Model Integrator in an Engineering Network by Automating Data Integration";
Vortrag: 17th IEEE International Conference on Industrial Informatics (INDIN 2019),
Helsinki, Finland;
22.07.2019
- 25.07.2019; in: "Proceedings of INDIN 2019",
IEEE,
(2019).
Zusätzliche Informationen
A. Lüder, K. Meixner, A. Behnert, S. Biffl:
"Modelling Engineered Object Dependencies in AutomationML-based Tool Chain";
Vortrag: 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA),
Västerås, Sweden;
07.09.2021
- 10.09.2021; in: "Proceedings 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)",
(2021),
ISBN: 978-1-6654-2478-3.
Zusätzliche Informationen
A. Lüder, J. Pauly, F. Rinker, S. Biffl:
"Data Exchange Logistics in Engineering Networks Exploiting Automated Data Integration";
Vortrag: 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2019),
Zaragoza, Spain;
10.09.2019
- 13.09.2019; in: "24th IEEE International Conference on Emerging Technologies and Factory Automation",
IEEE,
(2019),
ISBN: 978-1-7281-0304-4.
Zusätzliche Informationen
A. Lüder, J. Pauly, R. Rosendahl, F. Rinker, S. Biffl:
"Support for Engineering Chain Migration Towards Integrated Multi-Disciplinary Engineering Chains";
Vortrag: CASE 2018 - 14th IEEE International Conference on Automation Science and Engineering,
Munich, Germany;
20.08.2018
- 24.08.2018; in: "2018 IEEE 14th International Conference on Automation Science and Engineering (CASE)",
IEEE,
(2018).
Zusätzliche Informationen
A. Lüder, N. Schmidt, H. Steininger, S. Biffl:
"Analyse von Anforderungen an Software-Systeme zum Steuerungsentwurf";
Vortrag: 13. Fachtagung für den Entwurf Komplexer Automatisierungssysteme (EKA),
Magdeburg, Deutschland;
14.05.2014
- 15.05.2014; in: "Tagungsband der 13. Fachtagung für den Entwurf Komplexer Automatisierungssysteme (EKA)",
IFAK,
(2014),
14 S.
Zusätzliche Informationen
K. Matousek, D. Wahyudin, S. Biffl:
"Model-Driven Development of Intelligent Mass Customization Systems";
Vortrag: European Meetings on Cybernetics and Systems Research EMCSR 2008,
Vienna;
25.03.2008
- 28.03.2008; in: "European Meetings on Cybernetics and Systems Research Vol 2",
The Austrian Society for Cybernetic Studies,
Volume 2/ Vienna
(2008),
ISBN: 9783-85206-175-7;
S. 573
- 579.
Zusätzliche Informationen
K. Meixner, J. Decker, H. Marcher, A. Lüder, S. Biffl:
"Towards a Domain-Specific Language for Product-Process-Resource Constraints";
Vortrag: 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA),
Vienna, Austria;
08.09.2020
- 11.09.2020; in: "Proceedings of 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)",
IEEE,
(2020),
S. 1405
- 1408.
Zusätzliche Informationen
K. Meixner, K. Feichtinger, R. Rabiser, S. Biffl:
"A Reusabe Set of Real-World Product Line Case STudies for Comparing Variability Models in REsearch and Practice";
Vortrag: 25th ACM International Systems and Software Product Line Conference (SPLC 2021),
Leicester, UK;
06.09.2021
- 11.09.2021; in: "SPLC '21: Proceedings of the 25th ACM International Systems and Software Product Line Conference - Volume B",
ACM,
(2021),
ISBN: 978-1-4503-8470-4.
Zusätzliche Informationen
K. Meixner, L. Kathrein, D. Winkler, A. Lüder, S. Biffl:
"Efficient Test Case Generation from Product and Process Model Properties and Preconditions";
Vortrag: 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA),
Vienna, Austria;
08.09.2020
- 11.09.2020; in: "Proceedings of the 25th International Conference on Emerging Technologies and Factory Automation (ETFA)",
IEEE,
(2020),
S. 859
- 866.
Zusätzliche Informationen
K. Meixner, A. Lüder, J. Herzog, H. Röpke, S. Biffl:
"Modeling Expert Knowledge for Optimal CPPS Resource Selection for a Product Portfolio";
Vortrag: 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA),
Vienna, Austria;
08.09.2020
- 11.09.2020; in: "Proceedings of the 25th International Conference on Emerging Technologies and Factory Automation (ETFA)",
IEEE,
(2020),
S. 1687
- 1694.
Zusätzliche Informationen
K. Meixner, A. Lüder, J. Herzog, D. Winkler, S. Biffl:
"Patterns for Reuse in Production Systems Engineering";
Vortrag: 33rd International Conference on Software Engineering & Knowledge Engineering (SEKE),
Pittsburgh, USA;
01.07.2021
- 10.07.2021; in: "Proceedings of the 33th International Conference on Software Engineering and Knowledge Engineering (SEKE)",
IEEE,
(2021),
ISBN: 1-891706-52-7;
S. 37
- 44.
Zusätzliche Informationen
K. Meixner, R. Rabiser, S. Biffl:
"Feature Identification for Engineering Model Variants in Cyber-Physical Production Systems Engineering";
Vortrag: 14th International Working Conference on Variability Modelling of Software-Intensive Systems (VAMOS 2020),
Magdeburg, Deutschland;
05.02.2020
- 07.02.2020; in: "Proceedings of the 14th International Working Conference on Variability Modelling of Software-Intensive Systems",
ACM,
(2020),
ISBN: 978-1-4503-7501-6.
Zusätzliche Informationen
K. Meixner, R. Rabiser, S. Biffl:
"Towards Modeling Variability of Products, Processes, and Resources in CPPS";
Vortrag: Second International Workshop on Variability and Evolution of Software-Intensive Systems (VariVolution 2019),
Paris, France;
09.09.2019
- 13.09.2019; in: "Second International Workshop on Variability and Evolution of Software-Intensive Systems (VariVolution 2019)",
ACM,
(2019).
Zusätzliche Informationen
K. Meixner, F. Rinker, H. Marcher, J. Decker, S. Biffl:
"A Domain-Specific Language for Product-Process-Resource Modeling";
Vortrag: 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA),
Västerås, Sweden;
07.09.2021
- 10.09.2021; in: "Proceedings 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)",
(2021),
ISBN: 978-1-6654-2478-3.
Zusätzliche Informationen
K. Meixner, D. Winkler, S. Biffl:
"Supporting Domain Experts by using Model-Based Equivalence Class Partitioning for Efficient Test Data Generation";
Vortrag: 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2019),
Zaragoza, Spain;
10.09.2019
- 13.09.2019; in: "Proceedings of the 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2019)",
IEEE,
(2019),
ISBN: 978-1-7281-0304-4.
Zusätzliche Informationen
K. Meixner, D. Winkler, S. Biffl:
"Towards Combined Process & Tool Variability Management in Software Testing";
Vortrag: 13th International Workshop on Variability Modelling of Software-Intensive Systems (VAMOS 2019),
Leuven, Beldium;
06.02.2019
- 08.02.2019; in: "Vamos '19: Proceedings of the 13th International Workshop on Variability Modelling of Software-Intensive Systems",
ACM,
(2019),
ISBN: 978-1-4503-6648-9.
Zusätzliche Informationen
K. Meixner, D. Winkler, P. Novak, S. Biffl:
"Towards Model-driven Verification of Robot Control Code using Abstract Syntax Trees in Production Systems Engineering";
Vortrag: 7th International Conference on Model-Driven Engineering and Software Development 2019 (Modelsward 2019),
Prague, Czech Republik;
20.02.2019
- 22.02.2019; in: "Proceedings of the 7th International Conference on Model-Driven Engineering and Software Development 2019",
SciTePress,
(2019),
ISBN: 978-989-758-358-2;
S. 404
- 411.
Zusätzliche Informationen
K. Meixner, D. Winkler, M. Wapp, R. Rosendahl, S. Biffl:
"Investigating the Performance of selected Data Storage Concepts for AutomationML Models";
Vortrag: 45th Annual Conference of the IEEE Industrial Electronics Society (IECON 2019),
Lisbon, Portugal, Portugal;
14.10.2019
- 18.10.2019; in: "IEEE",
IEEE,
(2019),
ISBN: 978-1-7281-4878-6.
Zusätzliche Informationen
M. Melik-Merkumians, T Moser, A. Schatten, A. Zoitl, S. Biffl:
"Knowledge-based Runtime Failure Detection for Industrial Automation Systems";
Poster: 13th International Conference on Model Driven Engineering Languages and Systems (MODELS 2010),
Oslo, Norwegen;
05.10.2010; in: "Proceedings of the 5th Workshop on Models@run.time at the ACM/IEEE 13th International Conference on Model Driven Engineering Languages and Systems",
(2010),
12 S.
M. Merdan, T Moser, D. Wahyudin, S. Biffl:
"Performance Evaluation of Workflow Scheduling Strategies Considering Transportation Times and Conveyor Failures";
Vortrag: IEEE International Conference on Industrial Engineering and Engineering Management,
Singapore;
08.12.2008
- 11.12.2008; in: "Proceedings IEEM 2008",
(2008),
ISBN: 978-14244-2630-0;
6 S.
M. Merdan, T Moser, D. Wahyudin, S. Biffl, P. Vrba:
"Simulation of Workflow Scheduling Strategies using the MAST Test Management System";
Vortrag: 10th International Conference on Control, Automation, Robotics and Vision,
Hanoi, Vietnam;
17.12.2008
- 20.12.2008; in: "Proceedings 10th International Conference on Control, Automation, Robotics and Vision",
(2008),
ISBN: 978-1-4244-2287-6;
6 S.
Zusätzliche Informationen
R. Mordinyi, S. Biffl:
"Exploring Traceability Links via Issues for Detailed Requirements Coverage Reports";
Vortrag: 25th International Requirements Engineering Conference Workshops (REW),
Lisbon, Portugal;
04.09.2017
- 08.09.2017; in: "2017 IEEE 25th International Requirements Engineering Conference Workshops (REW) (2017)",
IEEE,
(2017),
ISBN: 978-1-5386-3488-2;
S. 359
- 366.
Zusätzliche Informationen
R. Mordinyi, S. Biffl:
"Versioning in Cyber-physical Production System Engineering--Best-Practice and Research Agenda";
Vortrag: 1st International Workshop on Software Engineering for Smart Cyber-Physical Systems (SEsCPS), 2015 IEEE/ACM,
Florence, Italy;
16.05.2015
- 24.05.2015; in: "Software Engineering for Smart Cyber-Physical Systems (SEsCPS), 2015 IEEE/ACM 1st International Workshop on",
IEEE,
(2015),
ISBN: 978-1-4673-7088-2;
S. 75
- 79.
Zusätzliche Informationen
R. Mordinyi, T Moser, S. Biffl:
"Model-based Validation of Integrated Automation Systems Engineering Environments";
Vortrag: 7th Vienna International Conference on Mathematical Modelling (MATHMOD'12),
Vienna;
15.02.2012
- 17.02.2012; in: "Proceedings of 7th Vienna International Conference on Mathematical Modelling (MATHMOD'12) - Modelling and Model Transformation in Automation Technologies",
(2012).
Zusätzliche Informationen
R. Mordinyi, T Moser, S. Biffl, D. Dhungana:
"Flexible Support for Adaptable Software and Systems Engineering Processes";
Vortrag: 23rd International Conference on Software Engineering and Knowledge Engineering (SEKE 2011),
Eden Roc Renaissance Hotel Miami Beach, USA;
07.07.2011
- 09.07.2011; in: "Proceedings of 23rd International Conference on Software Engineering and Knowledge Engineering (SEKE 2011)",
(2011),
ISBN: 1-891706-29-2;
S. 608
- 612.
Zusätzliche Informationen
R. Mordinyi, T Moser, E. Kühn, S. Biffl, A. Mikula:
"Foundations for a Model-Driven Integration of Business Services in a Safety-critical Application Domain";
Vortrag: 35th Euromicro Conference on Software Engineering and Advanced Applications (SEAA 2009),
Patras, Greece;
27.08.2009
- 29.08.2009; in: "Proceedings of the 35th Euromicro Conference on Software Engineering and Advanced Applications (SEAA 2009)",
IEEE Computer Society,
(2009),
ISBN: 978-0-7695-3784-9;
S. 267
- 274.
Zusätzliche Informationen
R. Mordinyi, T Moser, M. Murth, E. Kühn, S. Biffl:
"RDF Containers - A Framework for the Integration of Distributed and Heterogeneous Applications";
Vortrag: 3rd International Workshop on Ambient Data Integration,
Kreta;
16.10.2010
- 21.10.2010; in: "Proc. 3rd International Workshop on Ambient Data Integration",
(2010),
S. 90
- 99.
Zusätzliche Informationen
R. Mordinyi, T Moser, D. Winkler, S. Biffl:
"Navigating between Tools in Heterogeneous Automation Systems Engineering Landscapes";
Vortrag: 38th Annual Conference of the IEEE Industrial Electronics Society (IECON),
Montreal, Canada;
25.10.2012
- 28.10.2012; in: "Proceedings of the IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society",
(2012),
S. 6182
- 6188.
Zusätzliche Informationen
R. Mordinyi, A. Pacha, S. Biffl:
"Quality Assurance for Data from Low-Tech Participants in Distributed Automation Engineering Environments";
Vortrag: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011),
Toulouse, France;
05.09.2011
- 09.09.2011; in: "Proceeding of 16th IEEE International Conference on Emerging Technologies and Factory Automation",
Z. Mammeri (Hrg.);
(2011),
ISBN: 978-1-4577-0018-7;
S. 1
- 4.
Zusätzliche Informationen
R. Mordinyi, C. Prybila, D. Winkler, S. Biffl:
"Communication in Multi-discipline Engineering Projects using Local Data Point References";
Vortrag: 39th Annual Conference of the IEEE Industrial Electronics Society (IECON),
Vienna;
10.11.2013
- 13.11.2013; in: "Proceedings of the 39th Annual Conference of the IEEE Industrial Electronics Society (IECON)",
IEEE,
(2013),
ISBN: 978-1-4799-0223-1;
S. 6848
- 6855.
Zusätzliche Informationen
R. Mordinyi, P. Schindler, S. Biffl:
"Evaluation of NoSQL graph databases for querying and versioning of engineering data in multi-disciplinary engineering environments";
Vortrag: 20th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2015),
Luxembourg;
08.09.2015
- 11.09.2015; in: "Proceedings of the 20th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2015)",
IEEE,
(2015).
Zusätzliche Informationen
R. Mordinyi, E. Serral Asensio, D. Winkler, S. Biffl:
"Evaluating Software Architectures using Ontologies for Storing and Versioning of Engineering Data in Heterogeneous Systems Engineering Environments";
Vortrag: 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA),
Barcelona, Spain;
16.09.2014
- 19.09.2014; in: "Proceedings of the 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)",
IEEE,
(2014),
ISBN: 978-1-4799-4845-1.
Zusätzliche Informationen
R. Mordinyi, D. Winkler, F. Ekaputra, M. Wimmer, S. Biffl:
"Investigating Model Slicing Capabilities on Integrated Plant Models with AutomationML";
Vortrag: 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016),
Berlin, Germany;
06.09.2016
- 09.09.2016; in: "Proceedings of the 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016)",
IEEE,
(2016),
ISBN: 978-1-5090-1314-2;
S. 1
- 8.
Zusätzliche Informationen
R. Mordinyi, D. Winkler, F. Waltersdorfer, S. Scheiber, S. Biffl:
"Integrating Heterogeneous Engineering Tools and Data Models: A Roadmap for Developing Architecture Variants";
Vortrag: 7th Software Quality Days,
Wien;
20.01.2015
- 23.01.2015; in: "Proceedings of the 7th Software Quality Days",
Springer,
(2015),
ISBN: 978-3-319-13250-1;
S. 89
- 107.
Zusätzliche Informationen
T Moser, S. Biffl:
"Semantic Tool Interoperability for Engineering Manufacturing Systems";
Vortrag: 15th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Work in Progress Session,
Bilbao, Spain;
13.09.2010
- 16.09.2010; in: "Proc. 15th IEEE International Conference on Emerging Techonologies and Factory Automation (ETFA 2010)",
(2010),
ISBN: 978-1-4244-6848-5;
S. 47
- 50.
Zusätzliche Informationen
T Moser, S. Biffl:
"SemTrace: Semantic Requirements Tracing Using Explicit Requirement Knowledge";
Vortrag: 10th International Conference on Ontologies, Databases, and Applications of Semantics (ODBASE 2011),
Crete, Greece;
18.10.2011
- 20.10.2011; in: "Proceedings of 10th International Conference on Ontologies, Databases, and Applications of Semantics (ODBASE 2011)",
(2011),
S. 1
- 15.
Zusätzliche Informationen
T Moser, S. Biffl, W. Sunindyo, D. Winkler:
"Integrating Production Automation Expert Knowledge Across Engineering Stakeholder Domains";
Vortrag: 4th International Conference on Complex, Intelligent and Software Intensive Systems (CISIS 2010),
Krakow, Poland;
15.02.2010
- 18.02.2010; in: "Proceedings of the 4th International Conference on Complex, Intelligent and Software Intensive Systems (CISIS 2010)",
L. Barolli, F. Xhafa, S. Vitabile, H. Hsu (Hrg.);
IEEE Computer Society,
(2010),
ISBN: 978-0-7695-3967-6;
S. 352
- 359.
Zusätzliche Informationen
T Moser, S. Biffl, D. Winkler:
"Process-Driven Feature Modeling for Variability Management of Project Environment Configurations";
Vortrag: 11th International Conference on Product Focused Software Development and Process Improvement (PROFES 2010) - Short Paper Track,
Limerick, Ireland;
21.06.2010
- 23.06.2010; in: "Proc. 11th International Conference on Product Focused Software Development and Process Improvement (PROFES 2010) - Short Paper Track",
M. Ali Babar, M. Vierimaa, M. Oivo (Hrg.);
(2010),
ISBN: 978-3-642-13791-4;
S. 1
- 4.
Zusätzliche Informationen
T Moser, G. Dürr, S. Biffl:
"Ontology-Based Test Case Generation For Simulating Complex Production Automation Systems";
Vortrag: Twenty-Second International Conference on Software Engineering and Knowledge Engineering (SEKE 2010),
San Fransisco Bay, USA;
01.07.2010
- 03.07.2010; in: "Proc. Twenty-Second International Conference on Software Engineering and Knowledge Engineering (SEKE 2010)",
Knowledge Systems Institute,
(2010),
ISBN: 1-891706-26-8;
S. 478
- 482.
Zusätzliche Informationen
T Moser, M. Merdan, S. Biffl:
"A Pattern-Based Coordination and Test Framework for Multi-Agent Simulation of Production Automation Systems";
Vortrag: 4th International Conference on Complex, Intelligent and Software Intensive Systems (CISIS 2010),
Krakow, Poland;
15.02.2010
- 18.02.2010; in: "Proceedings of the 4th International Conference on Complex, Intelligent and Software Intensive Systems (CISIS 2010)",
IEEE Computer Society,
(2010),
ISBN: 978-0-7695-3967-6;
8 S.
Zusätzliche Informationen
T Moser, R. Mordinyi, S. Biffl, A. Mikula:
"Efficient System Integration Using Semantic Requirements and Capability Models - An Approach for Integrating Heterogeneous Business Services";
Vortrag: 11th International Conference on Enterprise Information Systems, ICEIS 2009,
Milan, Italy;
06.05.2009
- 10.05.2009; in: "Proceedings of the 11th International Conference on Enterprise Information Systems",
J. Cordeiro, J. Filipe (Hrg.);
Springer,
LNBIP 24
(2009),
ISBN: 978-989-8111-84-5;
S. 56
- 63.
Zusätzliche Informationen
T Moser, R. Mordinyi, A. Mikula, S. Biffl:
"Making Expert Knowledge Explicit to Facilitate Tool Support for Integrating Complex Information Systems in the ATM Domain";
Vortrag: Intl. Conf. on Complex, Intelligent and Software Intensive Systems (CISIS 2009),
Fukuoka, Japan;
16.03.2009
- 19.03.2009; in: "Intl. Conf. on Complex, Intelligent and Software Intensive Systems (CISIS 2009)",
(2009),
ISBN: 978-0-7695-3575-3;
S. 90
- 97.
Zusätzliche Informationen
T Moser, R. Mordinyi, W. Sunindyo, S. Biffl:
"Semantic Service Matchmaking in the ATM Domain Considering Infrastructure Capability Constraint";
Vortrag: 21st International Conference on Software Engineering & Knowledege Engineering,
Hyatt Harborside Hotel, Boston, Massachusetts, USA;
01.07.2009
- 03.07.2009; in: "Proceedings The 21st International Conference on Software Engineering & Knowledge Engineering (SEKE 2009)",
USA
(2009),
ISBN: 1-891706-24-1;
S. 222
- 227.
T Moser, R. Mordinyi, D. Winkler, S. Biffl:
"Engineering Project Management Using The Engineering Cockpit";
Vortrag: IEEE 9th International Conference on. Industrial Informatics (INDIN'2011),
Caparica, Lisbon, Portugal;
26.07.2011
- 29.07.2011; in: "Proceedings of IEEE 9th International Conference on. Industrial Informatics (INDIN'2011)",
(2011),
S. 579
- 584.
Zusätzliche Informationen
T Moser, R. Mordinyi, D. Winkler, S. Biffl:
"Extending Mechatronic Objects for Automation Systems Engineering in Heterogeneous Engineering Environments";
Vortrag: 17th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA),
Krakow, Poland;
17.09.2012
- 21.09.2012; in: "Proceedings of the 17th IEEE International Conference on Emerging Technologies & Factory Automation (ETFA)",
(2012).
Zusätzliche Informationen
T Moser, R. Mordinyi, D. Winkler, M. Melik-Merkumians, S. Biffl:
"Efficient Automation Systems Engineering Process Support Based on Semantic Integration of Engineering Knowledge";
Vortrag: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011),
Toulouse, France;
05.09.2011
- 09.09.2011; in: "Proceeding of 16th IEEE International Conference on Emerging Technologies and Factory Automation",
Z. Mammeri, R. Zurawski (Hrg.);
(2011),
ISBN: 978-1-4577-0016-3;
S. 1
- 8.
Zusätzliche Informationen
T Moser, H. Roth, S. Rozsnyai, R. Mordinyi, S. Biffl:
"Semantic Event Correlation Using Ontologies";
Vortrag: 8th International Conference on Ontologies, DataBases, and Applications of Semantics (ODBASE) 2009,
Algarve, Portugal;
01.11.2009
- 06.11.2009; in: "Proceedings of the 8th International Conference on Ontologies, DataBases, and Applications of Semantics (ODBASE) 2009",
Springer,
(2009),
ISBN: 978-3-642-05150-0;
S. 1087
- 1094.
Zusätzliche Informationen
T Moser, W. Sunindyo, M. Merdan, S. Biffl:
"Supporting Runtime Decision Making in the Production Automation Domain Using Design Time Engineering Knowledge";
Vortrag: 1st International Workshop on Ontology and Semantic Web for Manufacturing (OSEMA 2011),
Heraklion, Greece;
29.05.2011; in: "Proceedings of 1st International Workshop on Ontology and Semantic Web for Manufacturing (OSEMA 2011)",
A. Garcia, C. Toro, L. Ramos, L. Schröder (Hrg.);
(2011),
ISSN: 1613-0073;
S. 9
- 22.
Zusätzliche Informationen
T Moser, F. Waltersdorfer, D. Winkler, S. Biffl:
"Version Management and Conflict Detection across Tools in a (Software+) Engineering Environment";
Vortrag: Software Quality Days 2011,
Vienna;
18.01.2011
- 20.01.2011; in: "Proceedings of the Software Quality Days 2011",
(2011),
S. 1
- 4.
Zusätzliche Informationen
T Moser, D. Winkler, M. Heindl, S. Biffl:
"Automating the Detection of Complex Semantic Conflicts between Software Requirements";
Vortrag: 23rd International Conference on Software Engineering and Knowledge Engineering (SEKE 2011),
Eden Roc Renaissance Hotel Miami Beach, USA;
07.07.2011
- 09.07.2011; in: "Proceedings of 23rd International Conference on Software Engineering and Knowledge Engineering (SEKE 2011)",
M. Sadjadi (Hrg.);
(2011),
ISBN: 1-891706-29-2;
S. 729
- 735.
Zusätzliche Informationen
T Moser, D. Winkler, M. Heindl, S. Biffl:
"Requirements Management with Semantic Technology: An Empirical Study on Automated Requirements Categorization and Conflict Analysis";
Vortrag: Advanced Information Systems Engineering 23rd International Conference (CAiSE 2011),
London, United Kingdom;
20.06.2011
- 24.06.2011; in: "Proceedings of 23rd International Conference on Advanced Information Systems Engineering (CAiSE'11)",
Springer,
LNCS 6741
(2011),
ISBN: 978-3-642-21639-8;
S. 3
- 17.
Zusätzliche Informationen
M. Murth, D. Winkler, S. Biffl, E. Kühn, T Moser:
"Performance Testing of Semantic Publish/Subscribe Systems";
Poster: 9th International Conference on Ontologies, Databases, and Applications of Semantics (ODBASE) - Poster Session,
Crete, Greece;
25.10.2010
- 29.10.2010; in: "Proc. 9th International Conference on Ontologies, Databases, and Applications of Semantics (ODBASE) - Poster Session",
(2010),
ISSN: 0302-9743;
S. 45
- 46.
Zusätzliche Informationen
A. Musil, J. Musil, S. Biffl:
"Major Variants of the SIS Architecture Pattern for Collective Intelligence Systems";
Vortrag: 21st European Conference on Pattern Languages of Programs (EuroPLoP 2016),
Kaufbeuren, Germany;
06.07.2016
- 10.07.2016; in: "Proceedings of the 21st European Conference on Pattern Languages of Programs (EuroPLoP 2016)",
ACM,
(2016),
ISBN: 978-1-4503-4074-8.
Zusätzliche Informationen
A. Musil, J. Musil, S. Biffl:
"Towards Collective Intelligence System Architectures for Supporting Multi-Disciplinary Engineering of Cyber-Physical Production Systems";
Vortrag: CPPS Workshop,
Wien;
12.04.2016; in: "Proceedings of the CPPS Workshop",
IEEE,
(2016),
ISBN: 978-1-5090-1156-8.
Zusätzliche Informationen
A. Musil, J. Musil, D. Weyns, S. Biffl:
"Continuous Adaptation Management in Collective Intelligence Systems";
Vortrag: 13th European Conference on Software Architecture (ECSA 2019),
Paris, France;
09.09.2019
- 13.09.2019; in: "Software Architecture",
Springer,
(2019),
ISBN: 978-3-030-29982-8;
S. 109
- 125.
Zusätzliche Informationen
J. Musil, F. Ekaputra, R. Sabou, T. Ionescu, D. Schall, A. Musil, S. Biffl:
"Continuous Architectural Knowledge Integration: Making Heterogeneous Architectural Knowledge Available in Large-Scale Organizations";
Vortrag: 1st IEEE International Conference on Software Architecture (ICSA 2017),
Gothenburg, Sweden;
03.04.2017
- 07.04.2017; in: "Proceedings of the 1st IEEE International Conference on Software Architecture (ICSA 2017)",
IEEE,
(2017),
ISBN: 978-1-5090-5729-0;
S. 189
- 192.
Zusätzliche Informationen
J. Musil, A. Musil, S. Biffl:
"Elements of software ecosystem early-stage design for collective intelligence systems";
Vortrag: The 1st International Workshop on Software Ecosystem Architectures (WEA 2013),
Saint Petersburg, Russia;
19.08.2013; in: "WEA 2013 Proceedings of the 2013 International Workshop on Ecosystem Architectures",
ACM,
(2013),
ISBN: 978-1-4503-2314-7;
S. 21
- 25.
Zusätzliche Informationen
J. Musil, A. Musil, S. Biffl:
"SIS: An Architecture Pattern for Collective Intelligence Systems";
Vortrag: 20th European Conference on Pattern Languages of Programs (EuroPLoP '15),
Germany;
08.07.2015
- 12.07.2015; in: "Proceedings of the 20th European Conference on Pattern Languages of Programs (EuroPLoP '15)",
ACM,
(2015),
ISBN: 978-1-4503-3847-9.
Zusätzliche Informationen
J. Musil, A. Musil, S. Biffl:
"Towards a Coordination-Centric Architecture Metamodel for Social Web Applications";
Vortrag: 8th European Conference on Software Architecture (ECSA),
Wien;
25.08.2014
- 29.08.2014; in: "Proceedings of the 8th European Conference on Software Architecture (ECSA)",
Springer,
(2014),
ISBN: 978-3319099699.
Zusätzliche Informationen
J. Musil, A. Musil, D. Weyns, S. Biffl:
"An Architecture Framework for Collective Intelligence Systems";
Vortrag: 12th Working IEEE/IFIP Conference on Software Architecture (WICSA'15),
Montreal, Canada;
04.05.2015
- 07.05.2015; in: "Proceedings of the 12th Working IEEE/IFIP Conference on Software Architecture (WICSA'15)",
IEEE,
(2015),
ISBN: 978-1-4799-1922-2;
S. 21
- 30.
Zusätzliche Informationen
J. Musil, A. Musil, D. Weyns, S. Biffl:
"Society-Level Software Governance: A Challenging Scenario";
Vortrag: Online Conference 42nd International Conference on Software Engineering Workshops (ICSEW´20),
SEoul, Südkorea;
27.06.2020
- 19.07.2020; in: "42nd International Conference on Software Engineering Workshops",
(2020),
ISBN: 9781450379632;
S. 307
- 308.
Zusätzliche Informationen
J. Musil, A. Musil, D. Winkler, S. Biffl:
"A First Account on Stigmergic Information Systems and their Impact on Platform Development";
Vortrag: Nordic Symposium on Cloud Computing and Internet Technology,
Helsinki, Finland;
20.08.2012
- 24.08.2012; in: "Proceedings of the WICSA/ECSA 2012",
(2012),
S. 69
- 73.
Zusätzliche Informationen
J. Musil, A. Schweda, D. Winkler, S. Biffl:
"Improving Video Game Development: Facilitating Heterogeneous Team Collaboration Through Flexible Software Processes";
Vortrag: 17th European Systems and Software Process Improvement and Innovation Conference (EuroSPI 2010),
Grenoble, France;
01.09.2010
- 03.09.2010; in: "Proc. 17th European Systems and Software Process Improvement and Innovation Conference (EuroSPI 2010)",
A. Riel, R. O´Connor, S. Tickiewitch, R. Messnarz (Hrg.);
Springer,
(2010),
ISSN: 1865-0929;
S. 83
- 94.
J. Musil, A. Schweda, D. Winkler, S. Biffl:
"Synthesized Essence: What Game Jams Teach About Prototyping of New Software Products";
Vortrag: 32nd International Conference on Software Engineering (ICSE), New Ideas and Emerging Results (NIER) Track,
Cape Town, South Africa;
01.05.2010
- 08.05.2010; in: "Proc. 32nd International Conference on Software Engineering (ICSE), New Ideas and Emerging Results (NIER) Track",
(2010),
ISBN: 978-1-60558-719-6;
S. 183
- 186.
Zusätzliche Informationen
A. Neto, M. Kalinowski, A. Garcia, D. Winkler, S. Biffl:
"A Preliminary Comparison of Using Variability Modeling Approaches to Represent Experiment Families";
Vortrag: EASE 2019- Evaluation and Assessment in Software Engineering,
Copenhagen, Denmark;
14.04.2019
- 17.04.2019; in: "Proceedings of the Evaluation and Assessment on Software Engineering",
ACM,
(2019),
ISBN: 978-1-4503-7145-2;
S. 333
- 338.
Zusätzliche Informationen
C. Neto, A. Neto, M. Kalinowski, D. De Oliveira, R. Sabou, D. Winkler, S. Biffl:
"Using Model Scoping with Expected Model Elements to Support Software Model Inspections: Results of a Controlled Experiment";
Vortrag: 21st International Conference on Enterprise Information System, ICEIS 2019,
Heraklion, Greece;
03.05.2019
- 05.05.2019; in: "Proceedings of the 21st International Conference on Enterprise Information Systems",
SciTePress,
(2019),
ISBN: 978-989-758-372-8;
S. 107
- 118.
Zusätzliche Informationen
T. Neubauer, M. Klemen, S. Biffl:
"Business process-based valuation of IT-Security";
Vortrag: 7th International Workshop on Economics-Driven Software Engineering Research EDSER '05,
St. Louis, Missouri;
15.05.2005; in: "Proceedings of the 7th International Workshop on Economics-Driven Software Engineering Research EDSER '05, Volume 30 Issue 4",
ACM Press,
(2005),
ISBN: 1-59593-118-x;
S. 1
- 5.
Zusätzliche Informationen
T. Neubauer, M. Klemen, S. Biffl:
"Secure Business Process Management: A Roadmap";
Vortrag: First International Proceeding Conference on Availability, Reliability and Security (ARES'06),
Vienna;
20.04.2006
- 22.04.2006; in: "First International Conference on Availability, Reliability and Security (ARES'06)",
IEEE Computer Society,
California, USA
(2006),
ISBN: 0-7695-2567-9;
S. 457
- 464.
Zusätzliche Informationen
T. Neubauer, E. Weippl, S. Biffl:
"Digital Signatures with Familiar Appearance for e-Government Documents: Authentic PDF";
Vortrag: First International Conference on Availability, Reliability and Security (ARES'06),
Vienna;
20.04.2006
- 22.04.2006; in: "First International Conference on Availability, Reliability and Security (ARES'06)",
IEEE Computer Society,
California, USA
(2006),
ISBN: 0-7695-2567-9;
S. 723
- 731.
Zusätzliche Informationen
P. Novak, F. Ekaputra, S. Biffl:
""Generation of Simulation Models in MATLAB-Simulink Based on AutomationML Plant Description"";
Vortrag: 20th IFAC World Congress,
Toulouse, France;
09.07.2017
- 14.07.2017; in: "IFAC PapersOnline",
Elsevier Ltd.,
50
(2017),
ISSN: 2405-8963;
S. 7613
- 7620.
Zusätzliche Informationen
I. Omoronyia, G. Sindre, T. Stalhane, S. Biffl, T Moser, W. Sunindyo:
"A Domain Ontology Building Process for Guiding Requirements Elicitation";
Vortrag: 16th International Working Conference on Requirements Engineering (RefsQ 2010),
Essen, Germany;
30.06.2010
- 02.07.2010; in: "Proc. 16th International Working Conference on Requirements Engineering (RefsQ 2010)",
R. Wieringa, A. Persson (Hrg.);
Springer,
(2010),
ISSN: 0302-9743;
S. 188
- 202.
Zusätzliche Informationen
N. Oza, S. Biffl, C. Frühwirth, Y. Selioukova, R. Sarapisto:
"Reducing the Risk of Misalignment between Software Process Improvement Initiatives and Stakeholder Values";
Vortrag: European Systems & Software Process Improvement and Innovation (EuroSPI 2008),
Dublin, Ireland;
04.09.2008
- 05.09.2008; in: "Proceedings of the European Systems & Software Process Improvement and Innovation (EuroSPI 2008)",
Springer,
(2008),
ISBN: 9783540859345;
1 S.
Zusätzliche Informationen
A. Pieber, S. Biffl:
"Flexible Engineering Environment Integration for (Software+) Engineering Teams";
Poster: Junior Scientist Conference 2010,
Vienna;
07.04.2010
- 09.04.2010; in: "Proceedings of the Junior Scientist Conference 2010",
H. Kaiser, R. Kirner (Hrg.);
Vienna University of Technology,
(2010),
ISBN: 978-3-200-01797-9;
S. 49
- 50.
Zusätzliche Informationen
D. Port, M. Halling, R. Kazman, S. Biffl:
"Strategic Quality Assurance Planning";
Vortrag: International Conference on Software Engineering (ICSE),
Orlando, Florida;
05/2002; in: "Proc. of the 4th Int. Workshop on Economics Driven Software Engineering Research (EDSER-4)",
May 2002/Orlando, Florida
(2002).
D. Proenca, G Antunes, J. Borbinha, A. Caetano, S. Biffl, D. Winkler, C. Becker:
"Longevity as an Information Systems Design Concern";
Poster: CAiSE'13 Forum at the 25th International Conference on Advanced Information Systems Engineering (CAiSE),
Valencia, Spain;
20.06.2013; in: "Proceedings of the CAiSE'13 Forum at the 25th International Conference on Advanced Information Systems Engineering (CAiSE)",
(2013),
ISSN: 1613-0073;
S. 73
- 80.
Zusätzliche Informationen
F. Rinker, K. Meixner, L. Waltersdorfer, D. Winkler, A. Lüder, S. Biffl:
"Towards Efficient Generation of a Multi-Domain Engineering Graph with Common Concepts";
Vortrag: 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA),
Västerås, Sweden;
07.09.2021
- 10.09.2021; in: "Proceedings 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)",
(2021),
ISBN: 978-1-6654-2478-3.
Zusätzliche Informationen
F. Rinker, L. Waltersdorfer, S. Biffl:
"Towards Test-Driven Model Development in Production Systems Engineering";
Vortrag: Online Conference 22nd International Conference on Enterprise Information Systems (ICEIS 2020),
Online;
05.05.2020
- 07.05.2020; in: "Proceedings of the 22nd International Conference on Enterprise Information Systems - Volume 1: ICEIS",
ScitePress,
(2020),
ISBN: 978-989-758-423-7;
S. 213
- 219.
Zusätzliche Informationen
F. Rinker, L. Waltersdorfer, K. Meixner, S. Biffl:
"Towards Support of Global Views on Common Concepts employing Local Views";
Vortrag: 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2019),
Zaragoza, Spain;
10.09.2019
- 13.09.2019; in: "Proceedings of the 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2019)",
IEEE,
(2019),
ISBN: 978-1-7281-0304-4;
S. 1686
- 1689.
Zusätzliche Informationen
F. Rinker, L. Waltersdorfer, K. Meixner, D. Winkler, A. Lüder, S. Biffl:
"Continuous Integration in Multi-View Modeling: A Model Transformation Pipeline Architecture for Production Systems Engineering";
Vortrag: 9th International Conference on Model-Driven Engineering and Software Development (MODELSWARD 2021) - Online Conference,
Vienna, Austria;
08.02.2021
- 10.02.2021; in: "Proceedings of the 9th International Conference on Model-Driven Engineering and Software Development, Modelswards, Volume 1, MODELSWARD",
SCITEPRESS,
(2021),
ISBN: 978-989-758-487-9;
S. 286
- 293.
Zusätzliche Informationen
M. Rönkkö, C. Frühwirth, S. Biffl:
"Integrating Value and Utility Concepts into a Value Decomposition Model for Value-Based Software Engineering";
Vortrag: 10th International Conference on Product Focused Software Development and Process Improvement,
Oulu, Finland;
15.06.2009
- 17.06.2009; in: "Proceeding of the 10th International Conference on Product Focused Software Development and Process Improvement (PROFES)",
Springer,
(2009),
ISBN: 978-3-642-02151-0;
S. 362
- 374.
Zusätzliche Informationen
I. Rus, S. Biffl, M. Halling:
"Systematically Combining Process Simulation and Empirical Data in Support of Decision Analysis in Software Development";
Vortrag: International Conference on Software Engineering and Knowledge Engineering (SEKE),
Ottawa;
07/2002; in: "Proc. Int. Conf. On Software and Knowledge Engineering (SEKE02): Workshop on Software Engineering Decision Support (SEDECS)",
IEEE Comp. Soc. Press,
July 2002/Ottawa
(2002).
R. Sabou, F. Ekaputra, T. Ionescu, J. Musil, D. Schall, K. Haller, A. Friedl, S. Biffl:
"Exploring Enterprise Knowledge Graphs: a Use Case in Software Engineering";
Vortrag: ESWC 2018,
Heraklion, Greece;
03.06.2018
- 07.06.2018; in: "ESWC 2018",
Springer LNCS,
(2018),
ISBN: 978-3-319-93416-7;
S. 560
- 575.
Zusätzliche Informationen
R. Sabou, K. Käsznar, M. Zlabinger, S. Biffl, D. Winkler:
"Verifying Extended Entity Relationship Diagrams with Open Tasks";
Vortrag: 8th AAAI Conference on Human Computation and Crowdsourcing, HCOMP,
Hilversum, Netherlands;
25.10.2020
- 29.10.2020; in: "Proceedings of the 8th AAAI Conference on Human Computation and Crowdsourcing, HCOMP",
(2020),
S. 132
- 140.
Zusätzliche Informationen
R. Sabou, A. Musil, J. Musil, S. Biffl:
"Collective Intelligence Aspects of Cyber-Physical Social Systems: Results of a Systematic Mapping Study";
Poster: Collective Intelligence 2018,
Zurich, Switzerland;
07.07.2018
- 08.07.2018; in: "Collective Intelligence 2018",
ACM,
(2018).
R. Sabou, D. Winkler, P. Penzerstadler, S. Biffl:
"Verifying Conceptual Domain Models with Human Computation: A Case Study in Software Engineering";
Vortrag: 6th AAAI Conference on Human Computation and Crowdsourcing (HCOMP),
Zurich, Switzerland;
05.07.2018
- 08.07.2018; in: "Proceedings of the 6th AAAI Conference on Human Computation and Crowdsourcing (HCOMP)",
AAAI,
(2018),
ISBN: 978-1-57735-799-5;
S. 164
- 173.
Zusätzliche Informationen
M. Sarna, K. Meixner, S. Biffl, A. Lüder:
"Reducing Risk in Industrial Bin Picking With PPRS Configuration and Dependency Management";
Vortrag: 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA),
Västerås, Sweden;
07.09.2021
- 10.09.2021; in: "Proceedings 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)",
(2021),
ISBN: 978-1-6654-2478-3.
Zusätzliche Informationen
A. Schatten, K. Mustofa, S. Biffl, A. Tjoa, D. Wahyudin:
"Introducing "Health" Perspective in Open Source Web-Engineering Software Projects, Based on Project Data Analysis";
Vortrag: IIWAS International Conference on Information Integration, Web-Applications and Services,
Yogyakarta Indonesien;
04.12.2006
- 06.12.2006; in: "Proceedings of the International Conference on Information Integration, Web-Applications and Services",
Austrian Computer Society,
(2006).
Zusätzliche Informationen
N. Schmidt, A. Lüder, S. Biffl, H. Steininger:
"Analyzing requirements on software tools according to functional engineering phase in the Technical Systems Engineering Process";
Vortrag: 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA),
Barcelona, Spain;
16.09.2014
- 19.09.2014; in: "Proceedings of the 19th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)",
IEEE,
(2014),
ISBN: 978-1-4799-4845-1.
Zusätzliche Informationen
N. Schmidt, A. Lüder, H. Steininger, S. Biffl:
"AutomationML for User Requirements fulfillment related to Engineering Process Efficiency";
Vortrag: 40th Annual Conference of the IEEE Industrial Electronics Society (IECON 2014),
Dallas, Texas;
28.10.2014
- 01.11.2014; in: "Proceedings of the 40th Annual Conference of the IEEE Industrial Electronics Society (IECON 2014)",
IEEE,
(2014).
Zusätzliche Informationen
E. Serral Asensio, O. Kovalenko, T Moser, S. Biffl:
"A Systematic Comparison of Semantic Integration Data Storage Architectures for Multidisciplinary Systems";
Vortrag: 1st International Conference on Model-Driven Engineering and Software Development (MODELSWARD 2013),
Sevilla, Spain;
02.09.2013
- 04.09.2013; in: "MODELSWARD 2013",
SciTePress,
(2013),
ISBN: 978-989-8565-42-6;
S. 190
- 197.
Zusätzliche Informationen
E. Serral Asensio, R. Mordinyi, O. Kovalenko, D. Winkler, S. Biffl:
"Evaluation of Semantic Data Storages for Integrating Heterogeneous Disciplines in Automation Systems Engineering";
Vortrag: 39th Annual Conference of the IEEE Industrial Electronics Society (IECON),
Vienna;
10.11.2013
- 13.11.2013; in: "Proceedings of the 39th Annual Conference of the IEEE Industrial Electronics Society (IECON)",
IEEE,
(2013),
ISBN: 978-1-4799-0223-1;
S. 6856
- 6863.
Zusätzliche Informationen
W. Sunindyo, S. Biffl:
"Bridging Semantic Heterogeneities in Open Source Software Development Projects with Semantic Web Technologies";
Poster: Junior Scientist Conference 2010,
Vienna;
07.04.2010
- 09.04.2010; in: "Proceedings of the Junior Scientist Conference 2010",
H. Kaiser, R. Kirner (Hrg.);
Vienna University of Technology,
(2010),
ISBN: 978-3-200-01797-9;
S. 285
- 286.
Zusätzliche Informationen
W. Sunindyo, S. Biffl, C. Frühwirth, R. Mordinyi, T Moser, A. Schatten, S. Schrittwieser, E. Weippl, D. Winkler:
"Defect Detection Using Event-Based Process Analysis in (Software+) Engineering Projects";
Vortrag: 36th Euromicro Conference Software Engineering and Advanced Applications (SEAA 2010) - Work in Progress,
Lille, France;
01.09.2010
- 03.09.2010; in: "Proc. 36th Euromicro Conference Software Engineering and Advanced Applications (SEAA 2010) - Work in Progress Session",
E. Grosspietsch, K. Klöckner (Hrg.);
COREP Vauban,
Lille
(2010),
ISBN: 978-3-902457-27-1;
S. 1
- 2.
W. Sunindyo, S. Biffl, R. Mordinyi, T Moser, A. Schatten, M. Tabatabai Irani, D. Wahyudin, E. Weippl, D. Winkler:
"An Event-Based Empirical Process Analysis Framework";
Poster: 4th International Symposium on Empirical Software Engineering and Measurement (ESEM 2010) - Poster Sessions,
Bolzano-Bozen, Italy;
15.09.2010
- 17.09.2010; in: "Proc. 4th International Symposium on Empirical Software Engineering and Measurement (ESEM 2010) - Poster Sessions",
(2010),
S. 1
- 2.
Zusätzliche Informationen
W. Sunindyo, M. Melik-Merkumians, T Moser, S. Biffl:
"Enforcing Safety Requirements for Industrial Automation System at Runtime - Position Paper";
Vortrag: 2nd International Workshop on Requirements@Run.Time (RE@RunTime 2011),
Trento, Italy;
30.08.2011; in: "Proceedings of 2nd International Workshop on Requirements@Run.Time (RE@RunTime 2011)",
(2011),
ISBN: 978-1-4577-0944-9;
S. 37
- 42.
Zusätzliche Informationen
W. Sunindyo, T Moser, D. Winkler, S. Biffl:
"A Process Model Discovery Approach for Enabling Model Interoperability in Signal Engineering";
Vortrag: First International Workshop on Model-Driven Interoperability (MDI 2010),
Oslo, Norway;
03.10.2010
- 05.10.2010; in: "Proceedings of the First International Workshop on Model-Driven Interoperability (MDI 2010)",
J. Bezivin, R. Soley, A. Vallecillo (Hrg.);
ACM Press,
(2010),
ISBN: 978-1-4503-0292-0;
S. 15
- 21.
Zusätzliche Informationen
W. Sunindyo, T Moser, D. Winkler, S. Biffl:
"Foundations for Event-Based Process Analysis in Heterogeneous Software Engineering Environments";
Vortrag: 36th EUROMICRO Conference on Software Engineering and Advanced Applications (SEAA 2010),
Lille, France;
01.09.2010
- 03.09.2010; in: "Proc. 36th EUROMICRO Conference on Software Engineering and Advanced Applications (SEAA 2010)",
(2010),
ISBN: 978-0-7695-4170-9;
S. 313
- 322.
Zusätzliche Informationen
W. Sunindyo, T Moser, D. Winkler, R. Mordinyi, S. Biffl:
"Workflow Validation Framework in Distributed Engineering Environments";
Vortrag: 3rd International Workshop on Information Systems in Distributed Environment (ISDE'11),
Crete, Greece;
19.10.2011
- 21.10.2011; in: "Proceedings of 3rd International Workshop on Information Systems in Distributed Environment (ISDE'11)",
(2011),
S. 236
- 245.
Zusätzliche Informationen
F. Thillen, R. Mordinyi, S. Biffl:
"Isolated Testing of Software Components in Distributed Software Systems";
Vortrag: 6th Software Quality Days,
Wien;
14.01.2014
- 16.01.2014; in: "Proceedings of the 6th Software Quality Days, Lecture Notes in Business Information Processing",
Springer,
(2014),
ISBN: 978-3-319-03601-4;
S. 170
- 184.
Zusätzliche Informationen
D. Wahyudin, M. Heindl, S. Biffl, A. Schatten, Ronald Berger:
"In-Time Project Status Notification for All Team Members in Global Software Development as Part of Their work environments";
Vortrag: International Conference on Global Software Engineering (ICGSE), Workshop on Measurement-based Cockpits for Distributed Software and Systems Engineering Pro-jects (SOFTPIT),
Munich;
10.08.2007
- 13.08.2007; in: "Proceeding of SOFPIT Workshop 2007",
SOFPIT/ICGSE,
Munich
(2007),
S. 20
- 25.
Zusätzliche Informationen
D. Wahyudin, M. Heindl, B. Eckhard, A. Schatten, S. Biffl:
"In-time role-specific notification as formal means to balance agile practices in global software development settings";
Vortrag: IFIP CEE Software Engineering Techniques Conference,
Poznan Poland;
10.10.2007
- 14.10.2007; in: "Proceeding of CEE-SET 2007",
Springer Lecture Note on Computer Sciences,
Poznan
(2007),
ISBN: 978-3-540-85278-0;
S. 197
- 211.
Zusätzliche Informationen
D. Wahyudin, R. Ramler, S. Biffl:
"A Framework for Defect Prediction in Specific Software Project Contexts";
Vortrag: IFIP CEE Software Engineering Techniques Conference,
Brno, Czech Republic;
13.10.2008
- 15.10.2008; in: "Proceedings of the 3rd IFIP TC2 Central and East European Conference on Software Engineering Techniques CEE-SET 2008",
Z Huzar, J.R. Nawrocki, J. Zendulka (Hrg.);
Springer LNCS,
(2008),
S. 295
- 308.
Zusätzliche Informationen
D. Wahyudin, A. Schatten, S. Biffl, D. Winkler:
"Aspects of Software Quality Assurance in Open Source Software Projects: Two Case Studies from Apache Projects";
Vortrag: Euromicro International Conference,
Lübeck Germany;
27.08.2007
- 31.08.2007; in: "33 rd Euromicro SEAA 2007",
IEEE,
07/germany
(2007),
ISSN: 1089-6503;
S. 229
- 236.
Zusätzliche Informationen
D. Wahyudin, A. Schatten, D. Winkler, A. Tjoa, S. Biffl:
"Defect Prediction using Combined Product and Project Metrics: A Case Study from the Open Source "Apache" MyFaces Project Family";
Vortrag: Euromicro International Conference,
Parma, Italy;
03.09.2008
- 05.09.2008; in: "Proceedings of the Software Engineering and Advanced Applications, 2008. SEAA '08. 34th Euromicro Conference",
IEEE Computer Society,
(2008),
ISBN: 978-0-7695-3276-9;
S. 207
- 215.
Zusätzliche Informationen
F. Waltersdorfer, T Moser, A. Zoitl, S. Biffl:
"Version Management and Conflict Detection Across Heterogeneous Engineering Data Models";
Vortrag: IEEE International Conference on Industrial Informatics (INDIN),
Osaka, Japan;
13.07.2010
- 16.07.2010; in: "Proceedings INDIN 2010 - 8th IEEE International Conference on Industrial Informatics",
(2010),
ISBN: 978-1-4244-7299-4;
8 S.
L. Waltersdorfer, F. Rinker, L. Kathrein, S. Biffl:
"Experiences with Technical Debt and Management Strategies in Production Systems Engineering";
Vortrag: International Conference on Technical Debt 2020 (TechDebt 2020),
Seoul; Südkorea;
28.06.2020
- 30.06.2020; in: "Proceedings of the 3rd International Conference Technical Debt Conference (TechDebt)",
ACM,
(2020),
ISBN: 978-1-4503-7960-1;
S. 41
- 50.
Zusätzliche Informationen
R. Willmann, S. Biffl, E. Serral Asensio:
"Determining Qualified Production Processes for New Product Ramp-up using Semantic Web Technologies";
Vortrag: 14th International Conference on Knowledge Technologies and Data-Driven Business (I-KNOW),
Graz;
16.09.2014
- 19.09.2014; in: "Proceedings of the 14th International Conference on Knowledge Technologies and Data-Driven Business (I-KNOW)",
ACM,
(2014),
ISBN: 978-1-4503-2769-5.
Zusätzliche Informationen
R. Willmann, E. Serral Asensio, W. Kastner, S. Biffl:
"Shortening of product ramp-up by using a centralized knowledge base";
Vortrag: 11th IEEE International Conference on Industrial Informatics (INDIN),
Bochum, Germany;
29.07.2013
- 31.07.2013; in: "11th IEEE International Conference on Industrial Informatics (INDIN)",
IEEE,
(2013),
ISBN: 978-1-4799-0752-6;
S. 516
- 522.
Zusätzliche Informationen
D. Winkler, S. Biffl:
"An Empirical Study on Design Quality Improvement from Best-Practice Inspection and Pair Programming";
Vortrag: 7th International Conference on Product Focused Software Process Improvement (Profes),
Amsterdam, Netherland;
12.06.2006
- 14.06.2006; in: "7th International Conference on Product Focused Software Process Improvement (Profes)",
Springer,
Amsterdam
(2006),
ISBN: 3-54034-682-1;
S. 319
- 333.
Zusätzliche Informationen
D. Winkler, S. Biffl:
"Angepasste Testverfahren für automatisches Testen von Automatisierungssystemen";
Vortrag: Software & Systems Engineering Essentials (SEE-2011),
Frankfurt, Germany;
09.05.2011
- 10.05.2011; in: "Proceedings of Software & Systems Engineering Essentials (SEE-2011)",
(2011),
S. 357
- 369.
Zusätzliche Informationen
D. Winkler, S. Biffl:
"Christian Doppler Laboratory on Security and Quality Improvement in the Production Systems Life Cycle";
Poster: Software Engineering 2020,
Innsbruck;
24.02.2020
- 28.02.2020; in: "GI Edition Proceedings Band 300 "Software Engineering 2020"",
GI,
(2020),
ISBN: 978-3-88579-694-7;
S. 221
- 223.
Zusätzliche Informationen
D. Winkler, S. Biffl:
"Evaluierung von Werkzeugen für Distributed Pair Programming: Eine Fallstudie";
Vortrag: Conference on Software & Systems Engineering Essentials (SEE 2009),
Berlin, Germany;
25.05.2009
- 27.05.2009; in: "Proceedings of Conference on Software & Systems Engineering Essentials (SEE 2009)",
TU Clausthal, Germany,
(2009),
ISSN: 1860-8477;
S. 111
- 122.
Zusätzliche Informationen
D. Winkler, S. Biffl:
"Focused Inspections to Support Defect Detection in Multi-Disciplinary Engineering Environments";
Vortrag: 16th International Conference on Product-Focused Software Process Improvement (PROFES),
Bozen, Italy;
02.12.2015
- 04.12.2015; in: "Proceedings of the 16th International Conference on Product-Focused Software Process Improvement (PROFES)",
Springer,
(2015),
ISBN: 978-3-319-26843-9;
S. 372
- 379.
Zusätzliche Informationen
D. Winkler, S. Biffl:
"Integration von Software-Werkzeugen für die Entwicklung von Automatisierungssystemen mit dem "Engineering Service Bus"";
Vortrag: Software and Systems Engineering Essentials,
Cologne, Germany;
03.05.2010
- 04.05.2010; in: "Proc. Software and Systems Engineering Essentials",
(2010),
S. 165
- 176.
Zusätzliche Informationen
D. Winkler, S. Biffl:
"Interdisziplinäre Systementwicklungsprojekte: Änderungsmanagement über Werkzeuggrenzen hinweg";
Vortrag: Software & Systems Engineering Essentials (SEE-2011),
Frankfurt, Germany;
09.05.2011
- 10.05.2011; in: "Proceedings of Software & Systems Engineering Essentials (SEE-2011)",
(2011),
S. 65
- 77.
Zusätzliche Informationen
D. Winkler, S. Biffl, M. Ali Babar:
"An Empirical Investigation of Scenarios Gained and Lost in Architecture Evaluation Meetings";
Vortrag: 2nd International Symposium on Empirical Software Engineering and Measurement (ESEM),
Kaiserlautern, Germany;
09.10.2008
- 10.10.2008; in: "Proceedings of the 2nd International Symposium on Empirical Software Engineering and Measurement",
IEEE Computer Society,
(2008),
ISBN: 978-1-59593-971-5;
348 S.
Zusätzliche Informationen
D. Winkler, S. Biffl, K. Faderl:
"Investigating the Temporal Behavior of Defect Detection in Software Inspection and Inspection-Based Testing";
Vortrag: 11th International Conference on Product Focused Software Development and Process Improvement (PROFES 2010) - Short Paper Track,
Limerick, Ireland;
21.06.2010
- 23.06.2010; in: "Product-Focused Software Process Improvement",
Springer,
(2010),
ISBN: 978-3-642-13791-4;
S. 17
- 31.
Zusätzliche Informationen
D. Winkler, S. Biffl, A. Kaltenbach:
"Evaluating Tools that Support Pair Programming in a Distributed Engineering Environment";
Vortrag: Proc. Conference on Evaluation and Assessment in Software Engineering (EASE),
Keele, Great Britain;
12.04.2010
- 13.04.2010; in: "Proc. Conference on Evaluation and Assessment in Software Engineering (EASE)",
(2010),
S. 1
- 10.
Zusätzliche Informationen
D. Winkler, S. Biffl, T. Östreicher:
"Test-Driven Automation - Adopting Test-First Development to Improve Automation Systems Engineering Processes";
Vortrag: 16th EuroSPI Conference,
Alcala de Henares, Madrid, Spain;
02.09.2009
- 04.09.2009; in: "Proceedings of the 16th EuroSPI Conference",
(2009),
S. 1
- 13.
Zusätzliche Informationen
D. Winkler, S. Biffl, C. Seemann:
"A Controlled Experiment on Team Meeting Style in Software Architecture Evaluation";
Vortrag: Proc. Conference on Evaluation and Assessment in Software Engineering (EASE),
Keele, Great Britain;
12.04.2010
- 13.04.2010; in: "Proceedings of the 14th Conference on Evaluation and Assessment in Software Engineering (EASE 2010)",
(2010),
Paper-Nr. 3,
10 S.
Zusätzliche Informationen
D. Winkler, S. Biffl, B. Thurnher:
"Investigating the Impact of Active Guidance on Design Inspection";
Vortrag: 6th International Conference, PROFES 2005,
Oulu, Finland;
13.06.2005
- 15.06.2005; in: "Product Focused Software Process Improvement",
Springer,
Lecture Notes in Computer Science, Vol. 3547
(2005),
ISBN: 3-540-26200-8;
S. 458
- 473.
D. Winkler, C. Denger, F. Elberzhager, S. Biffl:
"QATAM: ein Szenario-basierter Ansatz zur Evaluierung von Qualitätsstrategien";
Vortrag: 2nd Conference on Software & Systems Engineering Essentials,
Bern, Schweiz;
28.04.2008
- 30.04.2008; in: "Proceedings of the 2nd Conference on Software & Systems Engineering Essentials",
J. Friedrich, A. Rausch, M. Sihling (Hrg.);
Insitut für Informatik, Technische Universität Clausthal, Germany,
(2008),
ISSN: 1860-8477;
S. 241
- 252.
Zusätzliche Informationen
D. Winkler, F. Ekaputra, S. Biffl:
"AutomationML Review Support in Multi-Disciplinary Engineering Environments";
Vortrag: 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016),
Berlin, Germany;
06.09.2016
- 09.09.2016; in: "Proceedings of the 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)",
IEEE,
(2016),
ISBN: 978-1-5090-1314-2;
S. 1
- 8.
Zusätzliche Informationen
D. Winkler, F. Ekaputra, E. Serral Asensio, S. Biffl:
"Efficient Data Integration and Communication Issues in Distributed Engineering Projects and Project Consortia";
Vortrag: 14th International Conference on Knowledge Technologies and Data-Driven Business (I-KNOW),
Graz;
16.09.2014
- 19.09.2014; in: "Proceedings of the 14th International Conference on Knowledge Technologies and Data-Driven Business (I-KNOW)",
ACM,
(2014),
ISBN: 978-1-4503-2769-5.
Zusätzliche Informationen
D. Winkler, F. Elberzhager, S. Biffl, R. Eschbach:
"Software Process Improvement Initiatives based on Quality Assurance Strategies: A QATAM Pilot Application";
Vortrag: 17th European Systems & Software Process Improvement and Innovation (EuroSPI),
Grenoble, France;
01.09.2010
- 03.09.2010; in: "Proc. 17th European Systems & Software Process Improvement and Innovation (EuroSPI)",
(2010),
ISBN: 978-3-642-15666-3;
S. 71
- 82.
D. Winkler, R. Hametner, S. Biffl:
"Automation Component Aspects for Efficient Unit Testing";
Vortrag: IEEE International Conference on Emerging Technologies and Factory Automation (ETFA),
Mallorca;
22.09.2009
- 26.09.2009; in: "2009 IEEE Conference on Emerging Technologies & Factory Automation",
(2009),
978-1-4244-2728-4/1946-0759;
8 S.
D. Winkler, L. Kathrein, K. Meixner, S. Biffl:
"Towards a Hybrid Process Model Approach in Production Systems Engineering";
Vortrag: 26th EuroSPI Conference,
Edinburgh, UK;
18.09.2019
- 20.09.2019; in: "Systems, Software and Services Process Improvement",
Springer,
(2019),
ISBN: 978-3-030-28005-5;
S. 339
- 354.
Zusätzliche Informationen
D. Winkler, M. Kitzler, C. Steindl, S. Biffl:
"Investigating the Impact of Experience and Solo/Pair Programming on Coding Efficiency: Results and Experiences from Coding Contests";
Vortrag: 14th International Conference, XP 2013,
Vienna;
03.06.2013
- 07.06.2013; in: "Agile Processes in Software Engineering and Extreme Programming",
Springer,
(2013),
ISBN: 978-3-642-38313-7;
S. 106
- 120.
Zusätzliche Informationen
D. Winkler, A. Korobeinykov, P. Novak, A. Lüder, S. Biffl:
"Big Data Needs and Challenges in Smart Manufacturing: An Industry-Academia Survey";
Vortrag: 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA),
Västerås, Sweden;
07.09.2021
- 10.09.2021; in: "Proceedings of the 26th International Conference on Emerging Technologies and Factory Automation (ETFA)",
(2021),
ISBN: 978-1-6654-2478-3.
Zusätzliche Informationen
D. Winkler, A. Lüder, K. Meixner, F. Rinker, S. Biffl:
"Towards Model Consistency Representations in a Multi-Disciplinary Engineering Network";
Vortrag: 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA),
Vienna, Austria;
08.09.2020
- 11.09.2020; in: "Proceedings of 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)",
(2020),
S. 1413
- 1416.
Zusätzliche Informationen
D. Winkler, K. Meixner, S. Biffl:
"Towards Flexible and Automated Testing in Production Systems Engineering Projects";
Vortrag: 23rd International Conference on Emerging Technologies and Factory Automation (ETFA),
Torino, Italy;
04.09.2018
- 07.09.2018; in: "Proceedings of the 23rd International Conference on Emerging Technologies and Factory Automation",
IEEE,
(2018),
ISBN: 978-1-5386-7108-5;
S. 169
- 176.
Zusätzliche Informationen
D. Winkler, K. Meixner, D. Lehner, S. Biffl:
"Test Reporting at a Large-Scale Austrian Logistics Organization: Lessons Learned and Improvement";
Vortrag: Profes 2019,
Barcelona, Spain;
27.11.2019
- 29.11.2019; in: "Product-Focused Software Process Improvement",
Springer,
(2019),
ISBN: 978-3-030-35333-9;
S. 53
- 69.
Zusätzliche Informationen
D. Winkler, R. Mordinyi, S. Biffl:
"Research Prototypes versus Products: Lessons Learned from Software Development Processes in Research Projects";
Vortrag: 20th European Conference, EuroSPI 2013,
Dundalk, Ireland;
25.06.2013
- 27.06.2013; in: "Systems, Software and Services Process Improvement",
Springer,
(2013),
ISBN: 978-3-642-39178-1;
S. 48
- 59.
Zusätzliche Informationen
D. Winkler, T Moser, R. Mordinyi, W. Sunindyo, S. Biffl:
"Engineering Object Change Management Process Observation in Distributed Automation Systems Projects";
Vortrag: 18th European System & Software Process Improvement and Innovation (EuroSPI 2011),
Roskilde University, Denmark;
27.06.2011
- 29.06.2011; in: "Proceedings of 18th European System & Software Process Improvement and Innovation (EuroSPI 2011)",
(2011),
S. 1
- 12.
Zusätzliche Informationen
D. Winkler, J. Musil, A. Musil, S. Biffl:
"Collective Intelligence-Based Quality Assurance: Combining Inspection and Risk Assessment to Support Process Improvement in Multi-Disciplinary Engineering";
Vortrag: 23rd EuroSPI Conference,
Graz;
14.09.2016
- 16.09.2016; in: "Proceedings of the 23rd EuroSPI Conference, Communications in Computer and Information Science",
Springer,
(2016),
ISBN: 978-3-319-44816-9;
S. 163
- 175.
Zusätzliche Informationen
D. Winkler, P. Novak, K. Meixner, J. Vyskocil, F. Rinker, S. Biffl:
"Product-Process-Resource Asset Networks as Foundation for Improving CPPS Engineering";
Vortrag: 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA),
Västerås, Sweden;
07.09.2021
- 10.09.2021; in: "Proceedings 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)",
(2021),
ISBN: 978-1-6654-2478-3.
Zusätzliche Informationen
D. Winkler, P. Novak, J. Vyskocil, K. Meixner, S. Biffl:
"Industry 4.0 Asset-Based Risk Mitigation for Production Operation";
Vortrag: 17th IEEE International Conference on Automation Science and Engineering (CASE),
Lyon, France;
23.08.2021
- 27.08.2021; in: "Proceedings of the 17th IEEE International Conference on Automation Science and Engineering (CASE)",
IEEE,
(2021),
ISBN: 978-0-7381-2502-2.
Zusätzliche Informationen
D. Winkler, B. Riedl, S. Biffl:
"Improvement of Design Specification with Inspection and Testing";
Vortrag: 31st EUROMICRO,
Portugal;
30.08.2005
- 03.09.2005; in: "Software Engineering and Advanced Applications",
IEEE Society Press,
(2005),
ISBN: 0-7695-2431-1;
S. 222
- 231.
Zusätzliche Informationen
D. Winkler, R. Sabou, S. Petrovic, G. Carneiro, M. Kalinowski, S. Biffl:
"Improving Model Inspection Processes with Crowdsourcing: Findings from a Controlled Experiment";
Vortrag: 24th European Systems, Software & Service Process Improvement and Innovation (EuroSPI),
Ostrava, Czech Republic;
06.09.2017
- 08.09.2017; in: "Proceedings of the 24th European Systems, Software & Service Process Improvement and Innovation (EuroSPI), CCIS",
Springer,
748
(2017),
ISBN: 978-3-319-64217-8;
S. 125
- 137.
Zusätzliche Informationen
D. Winkler, R. Sabou, S. Petrovic, G. Carneiro, M. Kalinowski, S. Biffl:
"Improving Model Inspection with Crowdsourcing";
Vortrag: 4th Workshop on Crowdsourcing in Software Engineering (CSI-SE), International Conference on Software Engineering (ICSE),
Buenos Aires, Argentina;
22.05.2017; in: "Proceedings of the 4th Workshop on Crowdsourcing in Software Engineering (CSI-SE), International Conference on Software Engineering (ICSE)",
ACM/IEEE,
(2017),
ISBN: 978-1-5386-4041-8;
S. 30
- 34.
Zusätzliche Informationen
D. Winkler, R. Sabou, S. Petrovic, G. Carneiro, M. Kalinowski, S. Biffl:
"Investigating Model Quality Assurance with a Distributed and Scalable Review Process";
Vortrag: 20th Ibero-American Conference on Software Engineering, Experimental Software Engineering (ESELAW) Track,
Buenos Aires, Argentina;
22.05.2017
- 23.05.2017; in: "Proceedings of the 20th Ibero-American Conference on Software Engineering, Experimental Software Engineering (ESELAW) Track",
IEEE,
(2017),
ISBN: 978-987-3806-98-8;
S. 141
- 154.
Zusätzliche Informationen
D. Winkler, M. Schmidt, R. Ramler, S. Biffl:
"Improving Unfamiliar Code with Unit-Tests: An Empirical Investigation on Tool-Supported and Human-Based Testing";
Vortrag: 13th International Conference on Product-Focused Software Development and Process Improvement,
Madrid;
13.06.2012
- 15.06.2012; in: "13th International Conference, PROFES 2012, Madrid, Spain, June 13-15, 2012 Proceedings",
Springer,
(2012),
S. 290
- 304.
Zusätzliche Informationen
D. Winkler, M. Schönbauer, S. Biffl:
"Towards Automated Process and Workflow Management: A Feasibility Study on Tool-Supported and Automated Engineering Process Modeling Approaches";
Vortrag: 40th Euromicro Conferences on Software Engineering and Advanced Applications (SEAA),
Verona, Italy;
27.08.2014
- 29.08.2014; in: "Proceedings of the 40th Euromicro Conferences on Software Engineering and Advanced Applications (SEAA), Software Management Track",
IEEE,
(2014),
ISBN: 978-1-4799-5795-8;
S. 102
- 110.
Zusätzliche Informationen
D. Winkler, B. Thurnher, S. Biffl:
"Early Software Product Improvement with Sequential Inspection Sessions: An Empirical Investigation of Inspector Capability and Learning Effects";
Vortrag: Euromicro International Conference,
Lübeck Germany;
27.08.2007
- 31.08.2007; in: "33rd Euromicro SEAA",
IEEE,
07/germany
(2007),
ISSN: 1089-6503;
S. 245
- 254.
Zusätzliche Informationen
D. Winkler, R Varvaroi, G. Goluch, S. Biffl:
"An Empirical Study On Integrating Analytical Quality Assurance Into Pair Programming";
Vortrag: ACM-IEEE International Symposium on Empirical Software Engineering,
Rio de Janeiro;
21.09.2006
- 22.09.2006; in: "5th ACM-IEEE International Symposium on Empirical Software Engineering",
ACM Press,
Vol. 2, NY
(2006),
ISBN: 1-59593-218-6;
S. 21
- 23.
Zusätzliche Informationen
Vorträge und Posterpräsentationen (ohne Tagungsband-Eintrag)
S. Biffl:
"Value-Based Software Engineering: Overview and Introduction";
Hauptvortrag: Conference on Object-Oriented Programming - Software meets Business,
Munich, Germany;
24.01.2008.
S. Biffl, D. Winkler, T. Thelin, M. Höst, B. Russo, G. Succi:
"Investigating the Effect of V&V and Modern Construction Techniques on Improving Software Quality";
Poster: ACM-IEEE International Symposium on Empirical Software Engineering,
Los Angeles, USA;
08/2004.
M. Heindl, S. Biffl:
"Value-Based Software Process";
Hauptvortrag: VASPO project workshop "Value-Based Software Project Improvement",
TU Helsinki, Finland;
21.08.2007.
R. Willmann, W. Kastner, S. Biffl:
"Semantic Web and its contribution to Industrie 4.0";
Vortrag: 15th European Advanced Process Control and Manufacturing Conference,
Freising, Germany;
13.04.2015
- 15.04.2015.
Dissertationen (eigene und begutachtete)
M. Auer:
"Analogy-Based Cost Estimation: Increasing Explicability, Effectiveness and Efficiency";
Betreuer/in(nen), Begutachter/in(nen): S. Biffl;
Institute of Software Technology and Interactive Systems,
2004;
Rigorosum: 2004.
M. Halling:
"Supporting Management Decisions in the Software Inspection Process";
Betreuer/in(nen), Begutachter/in(nen): S. Biffl;
E188 Softwaretechnik und Interaktive Systeme,
2002.
M. Heindl:
"Managing Dependencies in Complex Global Software Development Projects";
Betreuer/in(nen), Begutachter/in(nen): S. Biffl, P. Grünbacher;
Institut für Softwaretechnik und Interaktive Systeme,
2008;
Rigorosum: 05.05.2008.
Zusätzliche Informationen
R. Mordinyi:
"Managing Complex and Dynamic Software Systems with Space-Based Computing";
Betreuer/in(nen), Begutachter/in(nen): E. Kühn, S. Biffl;
Institut für Computersprachen, Programmiersprachen und Übersetzer,
2010;
Rigorosum: 10.06.2010.
Zusätzliche Informationen
S. Rozsnyai:
"Managing Event Streams for Querying Complex Events and Event Patterns";
Betreuer/in(nen), Begutachter/in(nen): S. Biffl, A. Schatten;
Institut für Softwaretechnik und Interaktive Systeme,
2008;
Rigorosum: 15.04.2008.
Zusätzliche Informationen
A. Schatten:
"Sustainable Web-Based Organisation of Project Related Information and Knowledge";
Betreuer/in(nen), Begutachter/in(nen): A. Tjoa, S. Biffl;
188,
2003.
D. Wahyudin:
"Quality Prediction and Evaluation Models for Products and Processes in Distributed Software Development";
Betreuer/in(nen), Begutachter/in(nen): S. Biffl, A. Tjoa;
Institut für Softwaretechnik und Interaktive Systeme,
2008;
Rigorosum: 05.11.2008.
Zusätzliche Informationen
R. Willmann:
"Ontology matchmaking of product ramp-up knowledge in manufacturing industries - How to transfer a cake-baking recipe between bakeries";
Betreuer/in(nen), Begutachter/in(nen): W. Kastner, S. Biffl, A. Lüder;
Rechnergestützte Automation,
2016;
Rigorosum: 02.12.2016.
Diplom- und Master-Arbeiten (eigene und betreute)
P. Achatschitz:
"Mobile Usability Evaluation within a software project - Workflow Optimization through a Mobile Application";
Betreuer/in(nen): S. Biffl;
E188 - Institut für Softwaretechnik und Interaktive Systeme,
2005.
P. Alexandrow:
"Heterogeneous integration of software-intensive system with Rule-Based Engine Event Correlation Analysis and Generation";
Betreuer/in(nen): S. Biffl, A. Schatten;
Institut für Softwaretechnik und Interaktive Systeme,
2008;
Abschlussprüfung: 08.12.2008.
B. Angerer:
"Fehlermodellierung basierend auf Software- Inspektionen von Anforderungsdokumenten";
Betreuer/in(nen): S. Biffl;
E 188 - Institut für Softwaretechnik und Informationssysteme,
2004.
C. Astl:
"Tool Support for Semantic-Model-Driven Systems Integration";
Betreuer/in(nen): S. Biffl, T Moser;
Institut für Softwaretechnik und Interaktive Systeme,
2008;
Abschlussprüfung: 03.12.2008.
Zusätzliche Informationen
F. Bistricky:
"Charakterisierung der Komplexität öffentlicher Softwareprojekte";
Betreuer/in(nen): S. Biffl;
Institut für Softwaretechnik und Interaktive Systeme,
2006.
C. Chalupa:
"Requirements-based Migration for Complex Financial Simulation Software";
Betreuer/in(nen): S. Biffl;
E188 - Institut für Softwaretechnik und Interaktive Systeme,
2006.
B. Eckhard:
"Context-Aware Notification in Global Software Development";
Betreuer/in(nen): S. Biffl, A. Schatten;
Institut für Softwaretechnik und interaktive Systeme,
2007.
Zusätzliche Informationen
C. Engelbrecht:
"Coordinated Multi-View Graph Analysis and Improvement with Applications in Cyber-Physical Production Systems Engineering";
Betreuer/in(nen): S. Biffl, A. Lüder;
Institut für Information Systems Engineering,
2021.
N. Ersoy:
"DISKUSSION VON ANALYSE- UND VORGEHENSMODELLEN IN SOFTWARE-PROJEKTENDISKUSSION VON ANALYSE- UND VORGEHENSMODELLEN IN SOFTWARE-PROJEKTEN";
Betreuer/in(nen): S. Biffl;
E188 Softwaretechnik und interaktive Systeme,
2004.
D. Frast:
"Test Automation for Commercial Software Applications";
Betreuer/in(nen): S. Biffl;
E188 Softwaretechnik und interaktive Systeme,
2002.
D. Frast:
"Testautomatisierung für kommerzielle Softwaresysteme - eine wiederverwendbare Architektur für Testautomatisierung";
Betreuer/in(nen): S. Biffl;
E 188 - Institut für Softwaretechnik und interaktive Systeme,
2002.
C. Frühwirth:
"Improving Security Incident Management in multi national IT Service Providers";
Betreuer/in(nen): S. Biffl;
Institut für Softwaretechnik und Interaktive Systeme,
2008;
Abschlussprüfung: 21.02.2008.
Zusätzliche Informationen
C. Gondowidjaja:
"Implementation and Coordination of Multi Agent Systems for Production Automation Simulation using Coordination Patterns";
Betreuer/in(nen): S. Biffl, T Moser;
Institut für Softwaretechnik und Interaktive Systeme,
2008;
Abschlussprüfung: 14.10.2008.
Zusätzliche Informationen
B. Graser:
"Visualizing a Software Project Portfolio with Multidimensional Scaling Methods";
Betreuer/in(nen): S. Biffl;
E188 Softwaretechnik und interaktive Systeme,
2003.
L. Gruber:
"Vorgehensmodell zur iterativen Einführung von Workflow-Management: Machbarkeitsstudie an Hand eines Beispiels aus der öffentlichen Verwaltung";
Betreuer/in(nen): S. Biffl;
Institut für Softwaretechnik und Interaktive Systeme,
2004.
E. Güclü:
"Ansätze zu Entwicklung von mobilen, serviceorientierten Software-Applikationen anhand eines Fallbeispiels aus dem Bereich e-Government";
Betreuer/in(nen): S. Biffl;
Institut für Softwaretechnik und Interaktive Systeme,
2004.
F. Güclü:
"Ansätze zur Entwicklung von mobilen, service-orientierten Software-Applikationen anhand eines Fallbeispiels aus dem Bereich e-Government";
Betreuer/in(nen): S. Biffl;
E 188 - Institut für Softwaretechnik und interaktive Systeme,
2004.
F. Günther:
"Total Quality Management and its Interpretation to the Software Industry";
Betreuer/in(nen): S. Biffl;
Institut für Softwaretechnik und Interaktive Systeme,
2004.
M. Halling:
"An Experimental Evaluation of Defect Content Estimation Techniques based on Defect Data from Software Inspection";
Betreuer/in(nen): S. Biffl;
E188 Softwaretechnik und interaktive Systeme,
2000.
M. Heindl:
"Value-based Requirements Tracing";
Betreuer/in(nen): S. Biffl;
E 188 - Institut für Softwaretechnik und interaktive Systeme,
2004.
M. Heindl:
"Value-based Requirements Tracing";
Betreuer/in(nen): S. Biffl;
Institut für Softwaretechnik und Interaktive Systeme,
2004.
O. Hödl:
"A Case Study on Project Management Process Improvement at a Turn-Key Software Solution Company";
Betreuer/in(nen): S. Biffl;
E188 - Institut für Softwaretechnik und Interaktive Systeme,
2005.
I. Hristoforva:
"Towards a Value-Based Usability Process Model in Software Engineering - process model and case study of the mobile technical support dispatching process at a medium -size software service provider";
Betreuer/in(nen): S. Biffl;
E188 - Institut für Softwaretechnik und Interaktive Systeme,
2005.
B. Huber:
"Design und Evaluierung eines grafischen Editors für XML Topic Maps";
Betreuer/in(nen): A. Tjoa, S. Biffl;
E188 Softwaretechnik und interaktive Systeme,
2003.
F. Inselkammer:
"Knowledge Management based on a Question Answering System - Design and Implementation of a Web Based Integrative Prototype in Java Struts";
Betreuer/in(nen): S. Biffl, A. Schatten;
E 188 - Institut für Softwaretechnik und interaktive Systeme,
2004.
A. Kaltenbach:
"Tool Evaluation for Distributed Pair Programming";
Betreuer/in(nen): S. Biffl, D. Winkler;
Institut für Softwaretechnik und Interaktive Systeme,
2008;
Abschlussprüfung: 13.03.2008.
Zusätzliche Informationen
H. Kargl:
"SemSearch - Design und Evaluierung eines Grafischen Browsers für Topic Maps";
Betreuer/in(nen): A. Tjoa, S. Biffl;
E188 Softwaretechnik und interaktive Systeme,
2003.
A. Kern:
"Indexing and Graphical Analysis in a Complex Event Processing Environment";
Betreuer/in(nen): S. Biffl, A. Schatten;
Institut für Softwaretechnik und Interaktive Systeme,
2008;
Abschlussprüfung: 01.12.2008.
A. Korobeinykov:
"Improving Smart Manufacturing Data Analytics with Big Data Concepts - a Case Study on an Industry 4.0 Environment";
Betreuer/in(nen): D. Winkler, S. Biffl;
Institut für Information Systems Engineering,
2021.
T. Kremmel:
"Project Portfolio Decision Support Using Evolutionary Algorithms";
Betreuer/in(nen): S. Biffl;
Institut für Softwaretechnik und Interaktive Systeme,
2008;
Abschlussprüfung: 19.10.2008.
Zusätzliche Informationen
D. Kretz:
"Improving Model Reviewing and Experimentation with Tool Support: A Controlled Experiment";
Betreuer/in(nen): D. Winkler, S. Biffl;
Institut für Information Systems Engineering,
2021.
Meyer:
"Lightweight UML model creation";
Betreuer/in(nen): S. Biffl;
Institut für Softwaretechnik und interaktive Systeme,
2007.
Zusätzliche Informationen
F. Moniakis:
"Qualitätsmanagement im E-Commerce";
Betreuer/in(nen): S. Biffl;
E188 Softwaretechnik und interaktive Systeme,
2003.
M. Opitz:
"A Case Study in the financial Service Sector on Network Performance of Client Server Achritectures";
Betreuer/in(nen): S. Biffl;
E188 - Institut für Softwaretechnik und Interaktive Systeme,
2006.
A. Prock:
"Hybrid Human-Machine Ontology Verification: Identifying Common Errors in Ontologies by Integrating Human Computation with Ontology Reasoners";
Betreuer/in(nen): R. Sabou, S. Biffl;
Institut für Information Systems Engineering,
2021.
C. Radl:
"A systematic literature review on requirements tracing approaches";
Betreuer/in(nen): S. Biffl, M. Heindl;
Institut für Softwaretechnik und interaktive Systeme,
2007.
Zusätzliche Informationen
K. Rammer:
"Angewandtes Risikomanagement für kleine und mittelgroße Unternehmen";
Betreuer/in(nen): S. Biffl, M. Heindl;
Institut für Softwaretechnik und Interaktive Systeme,
2008;
Abschlussprüfung: 09.04.2008.
Zusätzliche Informationen
B. Riedl:
"Empirical Investigation of the Effect of V&V and Agile Software Development on Software Quality Improvement using a Pilot Study";
Betreuer/in(nen): S. Biffl;
E188 - Institut für Softwaretechnik und Interaktive Systeme,
2005.
B. Riedl:
"Empirical Investigation of the Effect of V&V and Agile Software Development on Software Quality Improvement using a Pilot Study";
Betreuer/in(nen): S. Biffl;
Institut für Softwaretechnik und Interaktive Systeme,
2005.
M. Riehs:
"Improving Program Comprehension for Financial Simulation Software - A Case Study with Enhanced UML Activity Diagrams";
Betreuer/in(nen): S. Biffl;
E188 - Institut für Softwaretechnik und Interaktive Systeme,
2005.
W. Rieschl:
"Balancing Quality Assurance Methods along the Project Life Cycle: A Concept for Systematic Quality Assurance Strategy Evaluation";
Betreuer/in(nen): S. Biffl, D. Winkler;
Institut für Softwaretechnik und Interaktive Systeme,
2008;
Abschlussprüfung: 21.10.2008.
Zusätzliche Informationen
G.B. Rosenauer:
"A Standards-Based Approach to Tool Integration Using Java Business Integration: A Redesign of the ToolNet Framework built on Enterprise Integration Standards";
Betreuer/in(nen): S. Biffl, A. Schatten;
Institut für Softwaretechnik und Interaktive Systeme,
2008;
Abschlussprüfung: 22.10.2008.
Zusätzliche Informationen
M. Schedenig:
"Leveraging ESB and SEDA Technologies for Complex Event Correlation: Naiad: A Real-Time Event Correlation framework based on Mule";
Betreuer/in(nen): S. Biffl, A. Schatten;
Institut für Softwaretechnik und Interaktive Systeme,
2008;
Abschlussprüfung: 20.10.2008.
Zusätzliche Informationen
F. Stimpfl:
"Bridging the Gap between Management and Engineering:";
Betreuer/in(nen): S. Biffl, D. Winkler;
Institut für Softwaretechnik und interaktive Systeme,
2007.
Zusätzliche Informationen
G. Szabo:
"Restfehlerschätzung nach der Inspektion von Softwareanforderungsdokumenten";
Betreuer/in(nen): S. Biffl;
E188 Softwaretechnik und interaktive Systeme,
2003.
R. VECERA:
"Efficient Indexing, Search and Analysis of Event Streams";
Betreuer/in(nen): A. Schatten, S. Biffl;
Institut für Softwaretechnik und interaktive Systeme,
2007.
Zusätzliche Informationen
P. Weinhofer:
"A Light-Weight Assessment Framework for Process Maturity Evaluation: Case Study at a Large IT Service Provider";
Betreuer/in(nen): S. Biffl, D. Winkler, K. John;
Institut für Softwaretechnik und Interaktive Systeme,
2008;
Abschlussprüfung: 28.04.2008.
Zusätzliche Informationen
M. Weninger:
"An Empirical Evaluation of Tool-Supported Software Requirements Inspection";
Betreuer/in(nen): S. Biffl;
E 188 - Institut für Softwaretechnik und interaktive Systeme,
2002.
S. Wieninger:
"The Empirical Evaluation of Reading Techniques for the Inspection of Software Requirements";
Betreuer/in(nen): G. Futschek, S. Biffl;
E 188 - Institut für Softwaretechnik und interaktive Systeme,
2001.
D. Winkler:
"Empirical Evaluation of Inspections as a Quality Management Approach for Defect Detection in the Context of Software Engineering";
Betreuer/in(nen): S. Biffl;
E188 Softwaretechnik und interaktive Systeme,
2003.
Wissenschaftliche Berichte
W. Aigner, S. Miksch, B. Thurnher, S. Biffl:
"Improving the Analysis Process of Computerized Protocols and Temporal Data by Integrated Visualization Techniques - Evaluation Aspects";
Bericht für Asgaard-TR-2005-9;
2005;
27 S.
Zusätzliche Informationen
W. Aigner, S. Miksch, B. Thurnher, S. Biffl:
"PlanningLines Usability Studie - User Study zum Vergleich von PlanningLines und PERT Darstellung (in German)";
Bericht für Asgaard-TR-2005-3;
2005;
202 S.
M. Auer, L. Meyer, S. Biffl:
"An approach for testing the usability of UML tools";
Bericht für TU:IFS:QSE;
Berichts-Nr. TU:IFS:QSE 07-001,
2007;
18 S.
S. Biffl, M. Halling, P. Grünbacher, B. Boehm, H. Kitapci:
"Formalizing Informal Stakeholder Requirements Inputs: The Role of Inspections";
2002.
B. Freimut, T. Punter, S. Biffl, M. Ciolkowski:
"Report on the state-of-the-art of Empirical Studies in Software Engineering";
Bericht für Fraunhofer Institute for Experimental Software Engineering;
Berichts-Nr. Technical Report 007/E,
2002.
B. Graser, M. Auer, S. Biffl:
"An Overview on Commercial Software Project Planning and Monitoring Tools (TR TU:IFS:QSE 03-002)";
Bericht für Institute of Software Technology and Interactive Systems;
2003.
