Publikationsliste für
Sabine Seidler
als Autorin / Autor bzw. wesentlich beteiligte Person
219 Datensätze (2002 - 2015)
Bücher und Buch-Herausgaben
H. Danninger, P. Weinberger:
"Technik für Menschen";
in Buchreihe "Technik für Menschen - 200 Jahre Technische Universität Wien",
Buchreihen-Herausgeber: S. Seidler;
Böhlau Verlag,
Wien - Köln - Weimar,
2015,
ISBN: 978-3-205-20117-5,
156 S.
Zusätzliche Informationen
W. Grellmann, S. Seidler (Hrg.):
"Kunststoffprüfung";
Carl Hanser Verlag,
München, Wien,
2005,
ISBN: 3-446-22086-0;
738 S.
W. Grellmann, S. Seidler:
"Landolt-Börnstein, Volume 6 Polymers, Subvolume A Polymer Solids and Polymer Melts, Part 3 Mechanical and Thermomechanical Properties of Polymers";
in Buchreihe "Landolt-Börnstein",
Buchreihen-Herausgeber: K. Arndt, M. Lechner;
herausgegeben von: Springer;
Springer,
Berlin,
2014,
ISBN: 978-3-642-55165-9,
524 S.
W. Grellmann, S. Seidler (Hrg.):
"Polymer Testing";
Carl Hanser Verlag,
München,
2007,
ISBN: 978-3-446-40900-2;
674 S.
R. Schneider-Lauscher, J. Eberhardsteiner:
"Die Fakultät für Bauingeneiurwesen/The Faculty of Civil Engineering: Zukunft gestalten - Bestand erhalten/Shaping the Future - Conserving the Present, Band 6";
in Buchreihe "Technik für Menschen - 200 Jahre Technische Universität Wien",
Buchreihen-Herausgeber: S. Seidler;
Böhlau Verlag,
2015,
ISBN: 978-3-205-20112-0,
156 S.
Zeitschriftenartikel
V. Archodoulaki, T. Koch, A. Rodriguez, S. Seidler:
"Influence of different sterilization procedures on the morphological parameters and mechanical properties of ultra-high-molecular-weight polyethylene";
Journal of Applied Polymer Science,
120
(2011),
4;
S. 1875
- 1884.
Zusätzliche Informationen
V. Archodoulaki, S. Lüftl, T. Koch, S. Seidler:
"Property changes in polyoxymethylene (POM) resulting from processing, ageing and recycling";
Polymer Degradation and Stability,
Vol. 92
(2007),
12;
S. 2181
- 2189.
Zusätzliche Informationen
V. Archodoulaki, S. Lüftl, S. Seidler:
"Degradation Behavior of Polyoxymethylene: Influence of Different Stabilizer Packages";
Journal of Applied Polymer Science,
Vol. 105
(2007),
6;
S. 3679
- 3688.
Zusätzliche Informationen
V. Archodoulaki, S. Lüftl, S. Seidler:
"Effects of Coloration on the Physical and Mechanical Properties and on the Thermal Stability of Polyoxymethylene";
Advances in Polymer Technology,
25
(2006),
1;
S. 63
- 72.
V. Archodoulaki, S. Lüftl, S. Seidler:
"Oxidation induction time studies on the thermal degradation behaviour of polyoxymethylene";
Polymer Testing,
25
(2006),
S. 83
- 90.
V. Archodoulaki, S. Lüftl, S. Seidler:
"Stabiliser consumption of polyoxymethylene investigated by means of the pressure oxidative induction time method";
Polymer Testing,
27/2
(2007),
S. 234
- 242.
V. Archodoulaki, S. Lüftl, S. Seidler:
"Thermal degredation behaviour of poly(oxymethylene): 1. Degradation and stabilizer consumption";
Polymer Degradation and Stability,
86
(2004),
S. 75
- 83.
P. Bohaty, B. Vlach, S. Seidler, T. Koch, E. Nezbedov:
"Essential Work of Fracture and the Phase Transformation in β-IPP";
Journal of Macromolecular Science,
Part B - Physics
(2002),
Vol. B41, Nos. 4-6;
S. 657
- 669.
M.M. Bruno, N.G. Cotella, M.C. Miras, T. Koch, S. Seidler, C Barbero:
"Characterization of monolithic porous carbon prepared from resorcinol/formaldehyde gels with cationic surfactant";
Colloids and Surfaces, A: Physicochemical and Engineering Aspects,
358
(2010),
1-3;
S. 13
- 20.
Zusätzliche Informationen
Ch. Fritscher, N. Hüsing, S. Bernstorff, D. Brandhuber, T. Koch, S. Seidler, H. Lichtenegger:
"In-situ SAXS study on cationic and non-ionic surfactant liquid crystals using synchrotron radiation.";
Journal of Synchrotron Radiation,
12
(2005),
S. 717
- 720.
Zusätzliche Informationen
S. Gäbler, J. Stampfl, T. Koch, S. Seidler, G. Schüller, H. Redl, V. Juras, S. Trattnig, R. Weidisch:
"Determination of the viscoelastic properties of hydrogels based on polyethylene glycol diacrylate (PEG-DA) and human articular cartilage";
International Journal of Materials Engineering Innovation,
1
(2009),
1;
S. 3
- 20.
Zusätzliche Informationen
W. Grellmann, R. Lach, S. Seidler:
"Experimental Determination of Geometry-Independent Fracture Mechanics Values J, CTOD and K for Polymers";
International Journal of Fracture, Letters in Fracture and Micromechanics,
118
(2002),
1;
S. 9
- 14.
C. Hollinsky, S. Sandberg, T. Koch, S. Seidler:
"Biomechanical properties of lightweight versus heavyweight meshes for laparoscopic inguinal hernia repair and their impact on recurrence rates";
Surgical Endoscopy and other Interventional Techniques,
22
(2008),
12;
S. 2679
- 2685.
A. Joseph, T. Koch, S. Seidler, S. Thomas, K. Joseph:
"Crystallization behaviour and spherulite growth rate of isotactic polypropylene in isotactic polypropylene/natural rubber based thermoplastic elastomers";
Journal of Applied Polymer Science,
109
(2008),
3;
S. 1714
- 1721.
A. Joseph, S. Lüftl, S. Seidler, S. Thomas, J. Kuruvilla:
"Nonisothermal thermophysical evaluation of polypropylenen/natural rubber based TPEs: Effect of blend ratio and dynamic vulcanization";
Polymer Engineering and Science,
49
(2009),
7;
S. 1332
- 1339.
Zusätzliche Informationen
T. Koch, F.R. Kogler, U. Schubert, S. Seidler:
"Mechanical Properties of Organic-Inorganic Hybrid Materials Determined by Indentation Techniques";
Monatshefte für Chemie,
138
(2007),
S. 293
- 299.
Zusätzliche Informationen
T. Koch, D. Salaberger, A Zankel, H Reingruber, A. Steiger-Thirsfeld, Y Voronko, S. Seidler:
"Methods for Characterizing the 3-D Morphology of Polymer Composites";
Macromolecular Symposia,
315
(2012),
S. 115
- 124.
Zusätzliche Informationen
T. Koch, S. Seidler:
"Applications of instrumented indentation testing for the characterization of polypropylene materials";
Proceedings of the Institution of Mechanical Engineers Part C - Journal of Mechanical Engineering Science,
226
(2012),
2;
S. 385
- 393.
T. Koch, S. Seidler:
"Correlations between indentation hardness and yield stress in thermoplastic polymers";
Strain,
45
(2009),
1;
S. 26
- 33.
T. Koch, S. Seidler, E. Halwax, S. Bernstorff:
"Microhardness of quenched and annealed isotactic polypropylene";
Journal of Materials Science,
42
(2007),
S. 5318
- 5326.
F.R. Kogler, T. Koch, H. Peterlik, S. Seidler, U. Schubert:
"Mechanical, thermomechanical, and thermal properties of polystyrene crosslinked with a multifunctional zirconium oxo cluster";
Journal of Polymer Science Part B: Polymer Physics,
45
(2007),
16;
S. 2215
- 2231.
Zusätzliche Informationen
I. Kotter, W. Grellmann, T. Koch, S. Seidler:
"Morphology-Toughness Correlation of Polypropylene/Ethylene-Propylene Rubber Blends";
Journal of Applied Polymer Science,
100
(2006),
S. 3364
- 3371.
R. Lach, S. Seidler, W. Grellmann:
"Resistance against the Intrinsic Rate of Fracture Mechanics Parameters for Polymeric Materials under Moderate Impact Loading";
Mechanics of Time-Dependent Materials,
9
(2005),
2-3;
S. 103
- 119.
S. Lüftl, V. Archodoulaki, M. Glantschnig, S. Seidler:
"Influence of coloration on initial material properties and on thermooxidative ageing of a polyoxymethylene copolymer";
Journal of Materials Science,
42
(2007),
S. 1351
- 1359.
S. Lüftl, V. Archodoulaki, T. Koch, S. Seidler:
"Effects of the additive package on the thermal properties of a commercial polyoxymethylene homopolymer";
Journal of Vinyl & Additive Technology,
14
(2008),
1;
S. 21
- 27.
S. Lüftl, V. Archodoulaki, S. Seidler:
"Thermal-oxidative induced degradation behaviour of polyoxymethylene (POM) copolymer detected by TGA/MS*";
Polymer Degradation and Stability,
91
(2006),
S. 464
- 471.
S. Lüftl, B. Balluch, W. Smetana, S. Seidler:
"Kinetic study of the polymeric binder burnout in green low temperture co-fired ceramic tapes";
Journal of Thermal Analysis and Calorimetry,
103
(2011),
1;
S. 157
- 162.
Zusätzliche Informationen
R. Markut-Kohl, V. Archodoulaki, S. Seidler, G. Skrbensky:
"PE-UHMW in hip implants: Properties of Conventional and Crosslinked Prosthetic Components";
Advanced Engineering Materials,
11
(2009),
10;
S. B148
- B154.
M Sajjad, B. Feichtenschlager, S Pabisch, J. Svehla, T. Koch, S. Seidler, H. Peterlik, G. Kickelbick:
"Study of the effect of the concentration, size and surface chemistry of zirconia and silica nanoparticle fillers within an epoxy resin on the bulk properties of the resulting nanocomposites";
Polymer International,
61
(2012),
2;
S. 274
- 285.
S. Seidler, T. Koch:
"Determination of Local Mechanical Properties of α-and β-PP by means of Microhardness Measurements";
Journal of Macromolecular Science,
Part B - Physics
(2002),
Vol. B41, Nos. 4-6;
S. 851
- 861.
S. Seidler, T. Koch:
"Morphology - Property Correlations of PP materials by Means of Microhardness";
Macromolecular Symposia,
217
(2004),
S. 329
- 342.
W. Smetana, B. Balluch, G. Stangl, S. Lüftl, S. Seidler:
"Processing procedures for the realization of fine structured channel arrays and bridging elements by LTCC-Technology";
Microelectronics Reliability,
49
(2009),
6;
S. 592
- 599.
Zusätzliche Informationen
J. Stampfl, H. Fouad, S. Seidler, R. Liska, F. Schwager, A. Woesz, P. Fratzl:
"Fabrication and moulding of cellular materials by rapid prototyping";
International Journal of Materials and Product Technology,
21
(2004),
4;
S. 285
- 296.
Zusätzliche Informationen
J. Stampfl, A. Wöß, S. Seidler, H. Fouad, A. Pisaipan, F. Schwager, R. Liska:
"Water Soluble, Photocurable Resins for Rapid Prototyping Applications";
Macromolecular Symposia,
217
(2004),
1;
S. 99
- 107.
Buchbeiträge
V. Archodoulaki, S. Lüftl, S. Seidler:
"Charakterisierung des Abbauverhaltens von POM am Beispiel von Kfz-Teilen";
in: "Anwenderseminar Thermische Analyse in der Automobilindustrie",
W. Kunze (Hrg.);
TA Instruments,
Alzenau,
2002,
S. 75
- 88.
C. Bierögel, S. Seidler, W. Grellmann:
"Hybride Verfahren der Kunststoffdiagnostik";
in: "Kunststoffprüfung",
W. Grellmann, S. Seidler (Hrg.);
Carl Hanser Verlag,
München, Wien,
2005,
ISBN: 3-446-22086-0,
S. 521
- 536.
W. Grellmann, R. Lach, S. Seidler:
"Determination of Geometry - Independent Fracture Mechanics Values of Polymers";
in: "From Charpy to Present Impact Testing; Proceedings of Charpy Centenary Conference 2001",
D. Francois, A. Pineau (Hrg.);
herausgegeben von: ESIS;
Elsevier,
2002,
S. 145
- 154.
W. Grellmann, S. Seidler:
"Einleitung";
in: "Kunststoffprüfung",
W. Grellmann, S. Seidler (Hrg.);
Carl Hanser Verlag,
München, Wien,
2005,
ISBN: 3-446-22086-0,
S. 1
- 14.
W. Grellmann, S. Seidler:
"Zähigkeitsbewertung mit bruchmechanischen Methoden";
in: "Kunststoffprüfung",
W. Grellmann, S. Seidler (Hrg.);
Carl Hanser Verlag,
München, Wien,
2005,
ISBN: 3-446-22086-0,
S. 243
- 298.
T. Koch, S. Seidler:
"Mechanical Properties of Micro-Injection Moulded Components";
in: "Chemical and Physical Aspect of Polymer Science and Engineering",
K. Lederer, N. Aust (Hrg.);
Wiley-VCH,
Weinheim,
2002,
ISBN: 3-527-30471-1,
S. 499
- 506.
S. Seidler, G. Brauner:
"Energie - Umwelt - Wirtschaft: Gegensätze oder drei Teile eines Ganzen";
in: "energy2121 - Bilder zur Energiezukunft",
herausgegeben von: Klima- und Energiefonds;
Omninum,
2014,
ISBN: 978-3-99031-014-4,
S. 170
- 176.
S. Seidler, W. Grellmann:
"Härteprüfverfahren";
in: "Kunststoffprüfung",
W. Grellmann, S. Seidler (Hrg.);
Carl Hanser Verlag,
München, Wien,
2005,
ISBN: 3-446-22086-0,
S. 192
- 214.
S. Seidler, W. Grellmann:
"Schlagartige Beanspruchung";
in: "Kunststoffprüfung",
W. Grellmann, S. Seidler (Hrg.);
Carl Hanser Verlag,
München,
2005,
ISBN: 3-446-22086-0,
S. 156
- 169.
S. Seidler, W. Grellmann:
"Thermische Eigenschaften";
in: "Kunststoffprüfung",
W. Grellmann, S. Seidler (Hrg.);
Carl Hanser Verlag,
München, Wien,
2005,
ISBN: 3-446-22086-0,
S. 299
- 317.
S. Seidler, W. Grellmann:
"Wärmeformbeständigkeit";
in: "Kunststoffprüfung",
W. Grellmann, S. Seidler (Hrg.);
Carl Hanser Verlag,
München, Wien,
2005,
ISBN: 3-446-22086-0,
S. 591
- 599.
Beiträge in Tagungsbänden
T. Koch, S. Seidler, E. Halwax, S. Bernstoff:
"Microhardness of quenched iPP";
in: "11th International Conference Polymeric Materials",
herausgegeben von: Prof. Dr. Georg Michler, Martin-Luther-Universität Halle Wittenberg, Institut für Werkstoffwissenschaften, 06099 Halle;
Druck-Zuck,
Halle,
2004,
ISBN: 3-928466-68-2,
S. 13.
G. Reinisch, R. Markut, S. Seidler:
"Tribological Aspects and Nanoindentation Measurements of the "Viennese Cross-Linked Hip Retrievals"";
in: "COST 533 biotribology - Materials for improved wear resistance of total artificial joints",
herausgegeben von: Tekniker research alliance;
Tekniker - research alliance,
2007,
ISBN: 978-84-932064-4-4,
S. 13
- 25.
Zusätzliche Informationen
Vorträge und Posterpräsentationen (mit Tagungsband-Eintrag)
V. Archodoulaki, T. Koch, S. Lüftl, S. Seidler:
"Auswirkungen von Verarbeitung, Alterung und Rezyklierung auf die Eigenschaften von Polyoxymethylen";
Poster: 11. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Merseburg/ Germany;
20.06.2007
- 22.06.2007; in: "11. Problemseminar Deformations- und Bruchverhalten von Kunststoffen",
(2007),
5 S.
V. Archodoulaki, T. Koch, S. Lüftl, S. Seidler:
"Oxidationsinduktionszeit/-temperatur Versuche an Polyoxymethylen (POM) zur Untersuchung der thermooxidativen Alterung";
Vortrag: 13. International Conference Polymeric Materials 2008,
Halle;
24.09.2008
- 26.09.2008; in: "Polymeric Materials 2008",
(2008),
ISBN: 978-3-940744-17-3;
S. C22.
V. Archodoulaki, S. Lüftl, T. Koch, S. Seidler, R. Stoiber:
"Correlation between molar mass and thermal/mechanical properties of polyoxymethylene (POM) copolymers";
Poster: 6th international conference on Modification, Stabilization and Degradation of Polymers,
Athen, Griechenland;
05.09.2010
- 09.09.2010; in: "MoDeSt2010, Athens, Greece, Proceedings",
MoDeSt Hellenic Organizing Committee,
(2010),
ISBN: 978-960-99362-0-0;
2 S.
Zusätzliche Informationen
V. Archodoulaki, S. Lüftl, S. Seidler:
"Effects of Processing, Ageing and Recycling on the Properties of Polyoxymethylene (POM)";
Poster: 8th Austrian Polymer Meeting,
Linz, Austria;
20.09.2006
- 22.09.2006; in: "8th Austrian Polymer Meeting. The Chain of Knowledge - From Catalyst to Application",
(2006),
S. 48.
V. Archodoulaki, S. Lüftl, S. Seidler:
"Influence of coloration on the thermal degredation behaviour of artificially aged Polyoxymethylene (POM)";
Poster: Third International Conference on Polymer Modification, Degradation and Stabilisation (MoDeSt 3),
Lyon, France;
29.08.2004
- 02.09.2004; in: "MoDeSt 3. Third International Conference on Polymer Modification, Degradation and Stabilisation",
(2004),
4 S.
V. Archodoulaki, S. Lüftl, S. Seidler:
"Photooxidative Degradation of Polyoxymethylene (POM)";
Poster: 11. Internationale Fachtagung Polymerwerkstoffe 2004,
Halle/Saale;
29.09.2004
- 01.10.2004; in: "Polymeric Materials 2004. Abstracts",
G. H. Michler (Hrg.);
(2004),
ISBN: 3-928466-68-2;
S. PI-73.
V. Archodoulaki, S. Lüftl, S. Seidler:
"Property changes of polyoxymethylene (POM) by means of processing, ageing and recycling";
Vortrag: Fourth International Conference on Polymer Modification, Degradation and Stabilization (M2o06 DeSt),
San Sebastian, Spain;
10.09.2006
- 14.09.2006; in: "Fourth International Conference on Polymer Modification, Degradation and Stabilization - Book of Abstracts",
(2006),
S. 93.
V. Archodoulaki, S. Lüftl, S. Seidler:
"Thermal-oxidative induced degradation behaviour of Polyoxymethylene (POM) copolymer detected by TGA/MS";
Vortrag: Third International Conference on Polymer Modification, Degradation and Stabilisation (MoDeSt 3),
Lyon, France;
29.08.2004
- 02.09.2004; in: "MoDeSt 3. Third International Conference on Polymer Modification, Degradation and Stabilisation",
(2004),
4 S.
V. Archodoulaki, S. Lüftl, M. Spitzbart, S. Seidler:
"Determination of Oxidation Induction Time and Oxidation Induction Temperature (OIT) for Polyoxymethylene";
Vortrag: 6th Austrian Polymer Meeting, Wien (Austria),
Wien (Austria);
15.09.2003
- 17.09.2003; in: "6th Austrian Polymer Meeting, Wien (Aurstria)",
Wien (Austria)
(2003),
S. 72.
V. Archodoulaki, S. Lüftl, M. Spitzbart, S. Seidler:
"What You Should Avoid in the Application of Polymer Thermal Analysis (A Day in a Thermoanalytic Laboratory)";
Poster: 6th Austrian Polymer Meeting, Wien (Austria),
Wien (Austria);
15.09.2003
- 17.09.2003; in: "6th Austrian Polymer Meeting, Wien (Austria)",
Wien (Austria)
(2003),
S. 167.
V. Archodoulaki, R. Markut-Kohl, T. Koch, S. Seidler:
"Characterisation of the fracture behaviour and determination of micro-hardness of medical grade ultra high molecular weight polyethylene (PE-UHMW)";
Vortrag: 6th international conference on Modification, Stabilization and Degradation of Polymers,
Athen, Griechenland;
05.09.2010
- 09.09.2010; in: "MoDeSt2010, Athens, Greece, Proceedings",
MoDeSt Hellenic Organizing Committee,
(2010),
ISBN: 978-960-99362-0-0;
2 S.
Zusätzliche Informationen
B. Balluch, S. Lüftl, S. Seidler, W. Smetana:
"Binder Burnout Studies of LTCC Tapes by Means of Thermal Analyses";
Poster: International Conference of IMAPS Poland Chapter,
Pultusk, Poland;
21.09.2008
- 24.09.2008; in: "Abstracts Proceedings of the XXXII International Conference of IMAPS Poland Chapter",
(2008),
ISBN: 978-83-917701-6-0;
1 S.
M. Dolezal, S. Seidler, H.P. Degischer:
"Mechanical Damping Performance of Different Materials";
Vortrag: Materials Week 2002,
München;
30.09.2002
- 02.10.2002; in: "Materials Week 2002",
Werkstoff-Informationsges.m.b.H.,
Frankfurt
(2002),
ISBN: 3-88355-314-x.
C. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, R. Inführ, T. Koch, S. Seidler:
"Hierarchisch strukturiertes Siliziumdioxid und seine mechanischen Eigenschaften";
Vortrag: 2. Wiener Biomaterialsymposium,
TU Wien;
22.11.2006
- 24.11.2006; in: "2. Wiener Biomaterialsysmposium",
(2006),
9 S.
C. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"Fabrication of Bio-inspired Silica Composites";
Hauptvortrag: MRS Fall Meeting 2004,
Boston (USA);
29.11.2004
- 03.12.2004; in: "2004 MRS Fall Meeting",
MRS,
http://lucy.mrs.org/meetings/fall2004/abstracts/f04_abstract_ee.pdf
(2004),
Paper-Nr. EE 9.15,
1 S.
C. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"NANOSTRUCTURED SILICA/POLYMER-MONOLITHS";
Poster: ISOS XIV, 14th International Symposium on Organosilicon Chemistry; 3rd European Organosilicon Days,
Würzburg, Germany;
31.07.2005
- 05.08.2005; in: "ISOS XIV, 14th International Symposium on Organosilicon Chemistry",
(2005),
S. 158.
Ch. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, R. Inführ, T. Koch, S. Seidler:
"3-Dimensional Mesoporous Silica Monoliths and their Structural and Mechanical Properties";
Vortrag: Polymerwerkstoffe 2006,
Halle/Saale, Deutschland;
27.09.2006
- 29.09.2006; in: "Polymerwerkstoffe 2006 - Abstracts",
(2006),
ISBN: 3-86010-856-5;
S. 34.
Ch. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, R. Inführ, S. Seidler:
"Templating of organic/inorganic hybrid materials";
Poster: EMRS Spring Meeting 2005,
Strasbourg, France;
31.05.2005
- 03.06.2005; in: "European Materials Research Society Spring Meeting E-MRS 2005 - Scienific Programme",
(2005),
S. I -28/54.
Ch. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"Fabrication of Bio-inspired Silica Composites";
Poster: MRS Fall Meeting,
Boston, USA;
29.11.2004
- 03.12.2004; in: "MRS Fall Meeting 2004 - Program & Exhibit Guide",
(2004),
S. 729.
Ch. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"Nonostructured silica/polymer-monoliths";
Poster: ISOSXIV 3rd European Organosilicon Days,
Würzburg, Deutschland;
31.07.2006
- 02.08.2006; in: "ISOSXIV 3rd European Organosilicon Days - Abstracts",
(2006),
S. P071.
S. Gäbler, T. Koch, J. Stampfl, S. Seidler, H. Redl, S. Trattnig, R. Weidisch:
"Bestimmung der viskoelastischen Eigenschaften von Hydrogelen basierend auf Polyethylenglykol-Diacrylat und humanem Gelenkknorpel";
Poster: 3. Wiener Biomaterialsymposium,
Wien;
19.11.2008
- 21.11.2008; in: "3. Wiener Biomaterialsymposium, Tagungsband",
(2008),
ISBN: 978-3-200-01613-2;
S. 47.
W. Grellmann, I. Kotter, S. Seidler, T. Koch:
"Zähigkeitscharakterisierung von EPR-modifizierten Polypropylenwerkstoffen";
Poster: Werkstoffprüfung 2003,
Bad Neuenahr, Germany;
04.12.2003
- 05.12.2003; in: "Herausforderung durch den industriellen Fortschritt",
O. Buchholz, S. Geisler (Hrg.);
(2003),
ISBN: 3-514-00703-9;
S. 344
- 350.
W. Grellmann, I. Kotter, S. Seidler, T. Koch:
"Zähigkeitscharakterisierung von EPR-modifizierten Polypropylenwerkstoffen";
Poster: 11. Internationale Fachtagung Polymerwerkstoffe 2004,
Halle/Saale;
29.09.2004
- 01.10.2004; in: "Polymeric Materials 2004. Abstracts",
G. H. Michler (Hrg.);
(2004),
ISBN: 3-928466-68-2;
S. PI-16.
W. Grellmann, R. Lach, S. Seidler:
"Requirements on the Specimen Geometry to Determine Intrisic Fracture Mechanics Values of Polymer Materials";
Poster: 14th Bienniel Conference on Fracture - ECF 14,
Cracow, Polen;
08.09.2002
- 13.09.2002; in: "ECF 14 Fracture Mechanics Beyond 2000, Vol. I/III",
A. Neimitz, I. Rokach, D. Kocanda, K. Golos (Hrg.);
(2002),
S. 631
- 638.
W. Grellmann, S. Seidler, R. Lach:
"Geometry-Independent Fracture Mechanics Values of Polymers- Structural Interpretation for Geometrical Requirements";
Poster: 9. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Martin-Luther-Univ. Halle-Wittenberg Merseburg (D);
25.06.2003
- 27.06.2003; in: "9. Problemseminar Deformations- und Bruchverhalten von Kunststoffen",
CD-ROM,
(2003),
ISBN: 3-86010-710-0;
S. 360
- 363.
W. Grellmann, S. Seidler, R. Lach:
"Geometry-independet Fracture Mechanics Values - Precondition for Characterizing the Toughness of Polymers";
Poster: Polymerwerkstoffe 2002,
Halle (Saale);
25.09.2002
- 27.09.2002; in: "Polymerwekstoffe 2002",
(2002),
S. 98
- 99.
E.J. Haberland, T. Koch, S. Burkert, A. Klemenz, S. Seidler:
"Nanoindentation Pilot Study on Embedded and Cut Human Auditory Ossicles";
Vortrag: 11. Internationale Fachtagung Polymerwerkstoffe 2004,
Halle/ Saale;
29.09.2004
- 01.10.2004; in: "Polymeric Materials 2004. Abstracts",
G. H. Michler (Hrg.);
(2004),
ISBN: 3-928466-68-2;
S. D09.
T. Koch, C. Hollinsky, S. Sandberg, K. Hollinsky, S. Seidler:
"Mechanical behaviour of meshes used in hernia surgery";
Poster: 1st Joint Austrian & Slovenian Polymer Meeting ASPM 2008 and 9th Austrian Polymer Meeting,
Graz;
26.03.2008
- 28.03.2008; in: "ASPM 2008 - 9th Austrian Polymer Meeting",
(2008),
S. 64.
T. Koch, C. Hollinsky, S. Sandberg, K. Hollinsky, S. Seidler:
"Mechanisches Verhalten von Netzen für die Hernienchirurgie";
Poster: 3. Wiener Biomaterialsymposium,
Wien;
19.11.2008
- 21.11.2008; in: "3. Wiener Biomaterialsymposium, Tagungsband",
(2008),
ISBN: 978-3-200-01613-2;
S. 53.
T. Koch, F. R. Kogler, R. Potzmann, U. Schubert, S. Krivec, R. Liska, H. Lichtenegger, S. Seidler:
"Charakterisierung des mechanischen Verhaltens von organisch-anorganischen Hybridwerkstoffen mittels Eindruckprüfungen";
Vortrag: 13. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Halle-Merseburg;
29.06.2011
- 01.07.2011; in: "13. Problemseminar Deformation und Bruchverhalten von Kunststoffen",
(2011),
5 S.
T. Koch, F.R. Kogler, U. Schubert, S. Seidler:
"Characterization of Organic-Inorganic Hybrid Materials by Indentation Techniques";
Vortrag: Polymerwerkstoffe 2006,
Martin-Luther-Universität, Halle-Wittenberg, Deutschland;
27.09.2006
- 29.09.2006; in: "Polymerwerkstoffe 2006",
(2006),
S. 29.
Zusätzliche Informationen
T. Koch, F.R. Kogler, U. Schubert, S. Seidler:
"Mechanical and thermal properties of polystyrene crosslinked with a multifunctional zirkonium oxo cluster";
Vortrag: Chemical Congress 2008 "Chemistry for Sustainable Development",
Kathmandu, Nepal (eingeladen);
23.05.2008
- 25.05.2008; in: "Chemical Congress 2008",
(2008),
ISBN: 978-9937-2-0535-1;
S. 84.
T. Koch, F.R. Kogler, U. Schubert, S. Seidler:
"Mechanical Properties of Organic-Inorganic Hybrid Materials Determined by Indentation Techniques";
Vortrag: 8th Austrian Polymer Meeting,
Johannes Kepler University Linz, Austria;
20.09.2006
- 22.09.2006; in: "The Chain of Knowlegde - From Catalyst to Application",
K. Vincze-Minya, A. Schausberger (Hrg.);
(2006).
Zusätzliche Informationen
T. Koch, R. Lach, S. Seidler:
"About the possibilities to reduce the necessary material mass in Essential Work of Fracture of polymers";
Vortrag: 12th International Conference on Fracture,
Ottawa;
12.07.2009
- 17.07.2009; in: "Proceedings",
(2009),
Paper-Nr. T37.011,
9 S.
T. Koch, R. Lach, S. Seidler:
"Influence of the Specimen Geometry on the Essential Work of Fracture of Polypropylene Materials";
Poster: 5th Intern. Conf. on Fracture of Polymers, Composites and Adhesives,
Les Diablerets;
07.09.2008
- 11.09.2008; in: "5th Intern. Conf. on Fracture of Polymers, Composites and Adhesives",
European Structural Integrity Society,
Les Diablerets
(2008).
Zusätzliche Informationen
T. Koch, R. Lach, S. Seidler:
"Möglichkeiten zur Reduzierung der eingesetzten Werkstoffmenge für die EWF-Methode";
Poster: 12. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Merseburg;
24.06.2009
- 26.06.2009; in: "Tagungsband 12. Problemseminar",
(2009),
6 S.
T. Koch, S. Seidler:
"Application of instrumented micro and nano indentation testing in the field of polymer research";
Vortrag: Indo-Austrian Symposium on Advanced Materials Engineering IASAME 2010,
Hyderabad (eingeladen);
08.12.2010
- 09.12.2010; in: "IASAME 2010",
(2010),
S. 37
- 38.
T. Koch, S. Seidler:
"Correlations of Indentation Hardness and Yield Stress in Polymers";
Vortrag: 13th International Conference on Experimental Mechanics,
Alexandroupolis, Greece (eingeladen);
01.07.2007
- 06.07.2007; in: "Experimental Analysis of Nano and Engineering Materials and Structures",
E.E. Gdoutos (Hrg.);
(2007),
ISBN: 978-1-4020-6238-4;
6 S.
T. Koch, S. Seidler:
"Härte-Fließspannungs-Zusammenhänge in Kunststoffen";
Vortrag: 11. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Merseburg;
20.06.2007
- 22.06.2007; in: "11. Problemseminar "Deformation und Bruchverhalten von Kunststoffen"",
(2007),
6 S.
T. Koch, S. Seidler:
"Influence of crystallization conditions on micro hardness and indentation modulus of PP/PE-HD blends";
Vortrag: 13. International Conference Polymeric Materials 2008,
Halle;
24.09.2008
- 26.09.2008; in: "Polymeric Materials 2008",
(2008),
ISBN: 978-3-940744-17-3;
S. A09.
T. Koch, S. Seidler:
"Influence of crystallization temperature and annealing on the microhardness of alpha - and ß - phases of iPP and E/P-copolymer";
Poster: 6th Austrian Polymer Meeting,
Wien (Austria);
15.09.2003
- 17.09.2003; in: "6th Austrian Polymer Meeting, Wien (Austria)",
(2003),
S. 162.
T. Koch, S. Seidler:
"Influence of Crystallization Temperature and Annealing on the Microhardness of alpha - and ß - Phases of iPP and E/P-Copolymer";
Poster: Polymer Crystallization and Structure Formation in Pocessing - 20 Years of Fundamental and Applied Research in Linz (PC2003),
Linz (Austria);
19.09.2003
- 20.09.2003; in: "Polymer Crystallization and Structure Formation in Processing - 20 Years of Fundamental and Applied Research in Linz (PC2003)",
Linz (Austria)
(2003),
S. 1
- 9.
T. Koch, S. Seidler:
"Korrelationen von Eindringhärte und Fließspannung in Kunststoffen";
Poster: Werkstoffprüfung 2005,
Berlin (Germany);
01.12.2005
- 02.12.2005; in: "Tagungsband Werkstoffprüfung 2005: Herausforderungen neuer Werkstoffe an die Forschung und Werkstoffprüfung (DVM Bericht 641)",
W. Grellmann (Hrg.);
DVM,
(2005),
ISSN: 1861-8154;
S. 333
- 338.
T. Koch, S. Seidler:
"Morphologie und Mikrohärte von statistischen Ethylen/Propylen Copolymeren";
Vortrag: Polymerwerkstoffe 2002,
Halle (Saale);
25.09.2002
- 27.09.2002; in: "Polymerwekstoffe 2002",
(2002),
S. 354
- 357.
T. Koch, S. Seidler:
"Zusammenhang von Eindringhärte und Streck- und Druckfließspannung am Beispiel von PP/PE-Blends";
Vortrag: Werkstoffprüfung 2004,
Neu-Ulm (Deutschland);
25.11.2004
- 26.11.2004; in: "Tagungsband Werkstoffprüfung. Konstruktion, Qualitätssicherung und Schadensanalyse",
(2004),
S. 119
- 122.
T. Koch, S. Seidler, S. Bernstoff, E. Halwax:
"Microhardness of quenched Polypropylene";
Vortrag: Austrian Polymer Meeting,
Wien;
15.09.2003
- 17.09.2003; in: "6th Austrian Polymer Meeting",
(2003).
T. Koch, S. Seidler, S. Bernstorff, E. Halwax:
"Microhardness of quenched Polypropylene";
Vortrag: 6th Austrian Polymer Meeting,
Wien;
15.09.2003
- 17.09.2003; in: "6th Austrian Polymer Meeting, Wien (Austria)",
(2003),
S. 82.
T. Koch, S. Seidler, E. Halwax, S. Bernstorff:
"Microhardness of Quenched iPP";
Poster: 11. Internationale Fachtagung Polymerwerkstoffe 2004,
Halle/Saale;
29.09.2004
- 01.10.2004; in: "Polymeric Materials 2004. Abstracts",
G. H. Michler (Hrg.);
(2004),
ISBN: 3-928466-68-2;
S. PI-13.
T. Koch, S. Seidler, E. Halwax, S. Bernstorff:
"Microhardness of quenched iPP";
Poster: 10. Problemseminar Deformations- und Bruchverhalten von Kunststoffen,
Merseburg (Germany);
15.06.2005
- 17.06.2005; in: "10. Problemseminar Deformations- und Bruchverhalten von Kunststoffen",
(2005),
2 S.
T. Koch, A. Steiger-Thirsfeld, A Zankel, H Reingruber, D. Salaberger, S. Seidler:
"Morphology characterization of particle filled polymers by tomographic methods";
Poster: 14th International Conference Polymeric Materials,
Halle (Saale);
15.09.2010
- 17.09.2010; in: "Proceedings Polymeric Materials 2010",
(2010),
ISBN: 978-3-86829-282-4;
Paper-Nr. P P12,
4 S.
T. Koch, A. Steiger-Thirsfeld, A Zankel, H Reingruber, D. Salaberger, S. Seidler:
"Morphology characterization of particle filled polymers by tomographic methods";
Poster: 10th Austrian Polymer Meeting and 2nd Austrian-Slowenian Polymer Meeting,
Leoben;
08.09.2010
- 10.09.2010; in: "Book of Abstracts",
(2010),
S. 133.
T. Koch, A Zankel, H Reingruber, D. Salaberger, A. Steiger-Thirsfeld, N. Matsko, S. Seidler:
"Methods for characterizing the 3D morphology of polymer composites";
Vortrag: POLYCHAR 19 - World Forum on Advanced Materials,
Kathmandu, Nepal;
20.03.2011
- 24.03.2011; in: "Book of Abstracs",
Nepal Polymer Institute,
(2011),
ISBN: 9937-2-3292-9;
S. 115.
I. Kotter, W. Grellmann, T. Koch, S. Seidler:
"Einfluss der Mikrodeformationsprozesse vor der Rissspitze auf das Zähigkeitsverhalten von Polypropylenwerkstoffen";
Poster: 9. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Martin-Luther-Univ. Halle-Wittenberg, Merseburg D-;
25.06.2003
- 27.06.2003; in: "9. Problemseminar Deformations- und Bruchverhalten von Kunststoffen, Merseburg (Germany)",
Merseburg (Germany)
(2003),
ISBN: 3-86010-710-0;
S. 376
- 377.
I. Kotter, W. Grellmann, T. Koch, S. Seidler:
"Zähigkeitscharakterisierung von EPR-modifizierten Polypropylenwerkstoffen";
Poster: 10. Problemseminar Deformations- und Bruchverhalten von Kunststoffen,
Merseburg (Germany);
15.06.2005
- 17.06.2005; in: "10. Problemseminar Deformations- und Bruchverhalten von Kunststoffen",
(2005),
6 S.
I. Kotter, W. Grellmann, S. Seidler, J. Fiebig, M. Gahleitner:
"Morphologie-Zähigkeits-Korrelationen von EPR-modifizierten Polypropylenwerkstoffen";
Vortrag: 9. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Merseburg Germany;
25.06.2003
- 27.06.2003; in: "9. Problemseminar Deformations- und Bruchverhalten von Kunststoffen, Merseburg (Germany)",
R. Martin (Hrg.);
Martin-Luther-Univ. Halle-Wittenberg Merseburg, D-
(2003),
ISBN: 3-86010-710-0;
S. 229
- 240.
R. Lach, T. Koch, B. Feichtenschlager, G. Kickelbick, W. Grellmann, S. Seidler:
"Application of improved indentation fracture mechanics approaches on in-situ polymerisized organic-inorganic nanocomposites";
Vortrag: 12th International Conference on Fracture,
Ottawa;
12.07.2009
- 17.07.2009; in: "12th International Conference on Fracture - Proceedings",
(2009),
Paper-Nr. T29.009,
8 S.
R. Lach, T. Koch, S. Seidler:
"Influence of the Geometry on the Essential Work of Fracture of Polypropylene Materials";
Vortrag: 17th European Conference on Fracture: Multilevel Approach to Fracture of Materials, Components and Structures,
Brno;
02.09.2008
- 05.09.2008; in: "17th European Conference on Fracture: Multilevel Approach to Fracture of Materials, Components and Structures",
European Structural Integrity Society,
Brno
(2008),
ISBN: 978-80-214-3692-3;
Paper-Nr. PE170313,
7 S.
Zusätzliche Informationen
R. Lach, S. Seidler, W. Grellmann:
"Crack propagation kinetics of polymers at quasistatic and moderate impact loading";
Vortrag: 11th International Conference on Fracture (ICF 11),
Turin (Italy);
20.03.2005
- 25.03.2005; in: "11th International Conference on Fracture",
(2005),
Paper-Nr. Polymers 5360,
6 S.
R. Lach, S. Seidler, W. Grellmann:
"Crack Propagation Kinetics of Polymers under Moderate Impact Loading";
Poster: 11. Internationale Fachtagung Polymerwerkstoffe 2004,
Halle/Saale;
29.09.2004
- 01.10.2004; in: "Polymeric Materials 2004. Abstracts",
G. H. Michler (Hrg.);
(2004),
ISBN: 3-928466-68-2;
S. PI-69.
R. Lach, S. Seidler, W. Grellmann:
"Crack Propagation Kinetics of Polymers under Moderate Impact Loading";
Poster: 10. Problemseminar Deformations- und Bruchverhalten von Kunststoffen,
Merseburg (Germany);
15.06.2005
- 17.06.2005; in: "10. Problemseminar Deformations- und Bruchverhalten von Kunststoffen",
W. Grellmann (Hrg.);
(2005),
1 S.
R. Lach, S. Seidler, W. Grellmann:
"Resistance against the Intrinsic Rate of Fracture Mechanics Parameters for Polymeric Materials under Moderate Impact Loading";
Poster: 12th International Conference on Deformation Yield and Fracture of Polymers, Cambridge (UK),
Churchill College Cambridge, UK;
07.04.2003
- 10.04.2003; in: "12th International Conference on Deformation Yield and Fracture of Polymers",
IOM communications,
(2003),
ISBN: 1-86125-158-0;
S. 313
- 316.
R. Lach, S. Seidler, W. Grellmann:
"Resistance against the Intrinsic Rate of Fracture Mechanics Parameters for Polymeric Materials under Moderate Impact Loading";
Poster: 9. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Martin-Luther-Univ. Halle-Wittenberg Merseburg, D-;
25.06.2003
- 27.06.2003; in: "9. Problemseminar Deformations- und Bruchverhalten von Kunststoffen",
CD-ROM,
(2003),
ISBN: 3-86010-710-0;
S. 386
- 389.
R. Lach, S. Seidler, W. Grellmann:
"Time-changeable Fracture Mechanics Parameters for Polymers under Impact Loading";
Vortrag: 14th Bienniel Conference on Fracture - ECF 14,
Cracow, Poland;
08.09.2002
- 13.09.2002; in: "ECF 14 Fracture Mechanics Beyond 2000",
A. Neimitz, I. Rokach, D. Kocanda, K. Golos (Hrg.);
Vol. II/III
(2002),
S. 285
- 292.
R. Lach, S. Seidler, W. Grellmann:
"Zeitabhängiges Bruchverhalten von Polymerwerkstoffen unter schlagartiger Beanspruchung";
Vortrag: 9. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Martin-Luther Univ. Halle Wittenberg Merseburg D-;
25.06.2003
- 27.06.2003; in: "9. Problemseminar Deformation und Bruchverhalten von Kunststoffen, Merseburg (Germany)",
S. Seidler (Hrg.);
9. Problemseminar Deformations- und Bruchverhalten von Kunststoffen,
Martin-Luther-Univ. Halle Wittenberg Merseburg, D-
(2003),
ISBN: 3-86010-710-0;
S. 162
- 169.
H. Lichtenegger, C. Fritscher, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"3D-Templating of hierarchical ceramics";
Vortrag: MRS Spring Meeting 2004,
San Francisco, USA;
12.04.2004
- 16.04.2004; in: "MRS Spring Meeting 2004, Abstracts",
MRS,
(2004),
S. 368.
R. Liska, F. Schwager, H. Gruber, A. Wöß, A. Pisaipan, J. Stampfl, S. Seidler:
"A new Route for the Fabrication of Biomimetic Cellular Materials";
Vortrag: RadTech Europe 2003,
Berlin, Germany;
03.11.2003
- 05.11.2003; in: "RadTech Europe 2003 Conference Proceedings",
(2003),
ISBN: 3-87870-152-7;
S. 195
- 201.
S. Lüftl, V. Archodoulaki, T. Koch, S. Seidler:
"Correlation between molar mass and thermal properties of polyoxymethylene (POM) homopolymers";
Poster: Polymeric Materials 2012,
Halle (Saale);
12.09.2012
- 14.09.2012; in: "Abstracts",
(2012),
ISBN: 978-3-86829-517-7;
S. 113.
S. Lüftl, V. Archodoulaki, S. Seidler:
"Ageing Behaviour of Multiple Processed Poly(oxymethylene)";
Poster: Polymerwerkstoffe 2002,
Halle (Saale);
25.09.2002
- 27.09.2002; in: "Polymerwekstoffe 2002",
(2002),
S. 118.
S. Lüftl, V. Archodoulaki, S. Seidler:
"Einfluss der Stabilisierung auf die thermischen eigenschaften von Polyoxymethylen (POM)";
Poster: Werkstoffprüfung 2005,
Berlin (Germany);
01.12.2005
- 02.12.2005; in: "Tagungsband Werkstoffprüfung 2005: Herausforderungen neuer Werkstoffe an die Forschung und Werkstoffprüfung (DVM Bericht 641)",
W. Grellmann (Hrg.);
DVM,
(2005),
ISSN: 1861-8154;
S. 305
- 310.
S. Lüftl, V. Archodoulaki, S. Seidler:
"Thermal-Oxidative Induced Degradation Behaviour of Polyoxymethylene (POM) Detected by TGA-MS";
Vortrag: 2nd International Conference on Polymer Modification, Degraddation and Stabilisation,
Budapest;
30.06.2002
- 04.07.2002; in: "MoDeSt 2002 - Second Int. Conference on Polymer Modifiaction, Degraddation and Stabilisation",
CD
(2002).
S. Lüftl, V. Archodoulaki, S. Seidler, M. Glantschnig:
"Charakterisierung des Einflusses von Farbmasterbatches auf die thermischen und mechanischen Eigenschaften von Bauteilen aus einem Polyoxymethylen(POM)-Copolymer";
Vortrag: 11. Internationale Fachtagung Polymerwerkstoffe 2004,
Halle/Saale;
29.09.2004
- 01.10.2004; in: "Polymeric Materials 2004. Abstracts.",
G. H. Michler (Hrg.);
(2004),
ISBN: 3-928466-68-2;
S. C25.
S. Lüftl, V. Archodoulaki, S. Seidler, M. Glantschnig:
"Influence of Coloration on Photo- and Photooxidative Degradation of Polyoxymethylene (POM)";
Vortrag: 6th Austrian Polymer Meeting,
Wien (Austria);
15.09.2003
- 17.09.2003; in: "6th Austrian Polymer Meeting, Wien (Austria)",
(2003),
S. 71.
S. Lüftl, V. Archodoulaki, S. Seidler, M. Glantschnig:
"Influence of the Specimen Shape on Physical Testing Results of Polyoxymethylene (POM) Exposed to Thermooxidative Stresses";
Poster: 6th Austrian Polymer Meeting, Wien (Austria),
Wien (Austria);
15.09.2003
- 17.09.2003; in: "6th Austrian Polymer Meeting",
(2003),
S. 159.
S. Lüftl, V. Archodoulaki, S. Seidler, M. Glantschnig:
"Influence of the Specimen Shape on Physical Testing Results of Polyoxymethylene (POM) Exposed to Thermooxidative Stresses";
Vortrag: 18th Bratislava International Conference on Modified Polymers (ModPol 2003),
Stara Lesna (Slovakia);
05.10.2003
- 08.10.2003; in: "18th Bratislava International Conference on Modified Polymers (ModPol 2003)",
Stara Lesna (Slovakia)
(2003),
ISBN: 80-968433-2-x;
S. 31.
S. Lüftl, V. Archodoulaki, S. Seidler, T. Koch:
"Effects of the additive package on the thermal properties of a commercial Polyoxymethylene (POM) homopolymer";
Poster: 10. Problemseminar Deformations- und Bruchverhalten von Kunststoffen,
Merseburg (Germany);
15.06.2005
- 17.06.2005; in: "10. Problemseminar Deformations- und Bruchverhalten von Kunststoffen",
(2005),
1 S.
S. Lüftl, V. Archodoulaki, S. Seidler, T. Koch:
"Effects of the additive package on the thermal properties of a commercial Polyoxymethylene (POM) homopolymer";
Vortrag: 7th Austrian Polymer Meeting,
Graz, Austria;
04.07.2005
- 06.07.2005; in: "7th Austrian Polymer Meeting",
Institute for Chemistry and Technology of Organic Materials, Graz University of Technology,
(2005),
S. 53.
R. Markut, V. Archodoulaki, S. Seidler:
"PE-UHMW in Hip Implants: Non-Crosslinked and Highly Crosslinked Prosthetic Components";
Vortrag: 1st Joint Austrian & Slovenian Polymer Meeting ASPM 2008 and 9th Austrian Polymer Meeting,
Graz (eingeladen);
26.03.2008
- 28.03.2008; in: "ASPM 2008 - 9th Austrian Polymer Meeting",
(2008),
S. 37.
R. Markut, V. Archodoulaki, S. Seidler:
"PE-UHMWP in hip implants: The influence of crosslinking on structural parameters and micro-mechanical properties";
Poster: 13. International Conference Polymeric Materials 2008,
Halle;
24.09.2008
- 26.09.2008; in: "Polymeric Materials 2008",
(2008),
ISBN: 978-3-940744-17-3;
S. PI-18.
R. Markut, A. Rodriguez, V. Archodoulaki, S. Seidler:
"Werkstoffcharakterisierung und Schadensanalyse von Implantaten aus PE-UHMW";
Vortrag: 11. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Merseburg;
20.06.2007
- 22.06.2007; in: ""11. Problemseminar Deformations- und Bruchverhalten von Kunststoffen"",
(2007),
8 S.
R. Markut-Kohl, V. Archodoulaki, T. Koch, S. Seidler:
"The effect of the consolidation process on structural parameters and micromechanical properties of PE-UHMW";
Poster: 4th International Meeting - UHMWPE for arthroplasty: from powder to debris,
Torino, Italy;
16.09.2009
- 17.09.2009; in: "4th International Meeting - UHMWPE for arthroplasty: from powder to debris;",
(2009).
R. Markut-Kohl, V. Archodoulaki, S. Seidler:
"Eigenschaften vernetzter und konventioneller PE-UHMW Werkstoffe für die orthopädische Anwendung";
Vortrag: 12. Problemseminar Deformation und Bruch,
Merseburg;
24.06.2009
- 26.06.2009; in: "tagungsband_12_Problemseminar",
(2009),
8 S.
R. Markut-Kohl, V. Archodoulaki, S. Seidler:
"Influence of the consolidation and crosslinking processes on the properties of orthopaedic grade PE-UHMW";
Vortrag: European Polymer Congress 2009,
Graz;
12.07.2009
- 17.07.2009; in: "epf´09 european polymer congress",
(2009),
S. 112.
R. Markut-Kohl, V. Archodoulaki, S. Seidler:
"PE-UHMW IN IMPLANTS: Influence of processing on the chemical and physical structure";
Vortrag: 2nd Workshop Biotribology - Bridging Engineering and Medicine; Final Meeting COST 533 Action,
Guimarães, Portugal;
25.05.2009
- 27.05.2009; in: "Biotribology - Bridging Engineering and Medicine",
(2009),
S. 16.
R. Markut-Kohl, V. Archodoulaki, S. Seidler, G. Skrbensky:
"PE-UHMW in der Endoprothetik: Eigenschaften vernetzter und nicht vernetzter Implantatteile";
Vortrag: 3. Wiener Biomaterialsymposium,
Wien;
19.11.2008
- 21.11.2008; in: "3. Wiener Biomaterialsymposium, 19.-21.11.2008",
(2008),
ISBN: 978-3-200-01613-2;
S. 32.
R. Markut-Kohl, T. Koch, V. Archodoulaki, S. Seidler:
"PE-UHMW in hip implants: The influence of crosslinking on structural parameters and micro-mechanical properties";
Poster: Cost 533 Training School,
Paris;
04.05.2009
- 08.05.2009; in: "Cost 533 Training School - Biotribology. Basis And Trends In Medicine And Engineering And Its Societal Impact",
(2009),
1 S.
R. Markut-Kohl, T. Koch, V. Archodoulaki, S. Seidler:
"PE-UHMW in hip implants: The influence of crosslinking on structural parameters and mirco-mechanical properties";
Poster: Junior Scientist Conference,
Wien;
16.11.2008
- 18.11.2008; in: "Junior Scientist Conference 2008: Proceedings",
(2008),
ISBN: 978-3-200-01612-5;
S. 209
- 210.
R. Markut-Kohl, M. Mosbeck, V. Archodoulaki, T. Koch, S. Seidler:
"Hüftpfanneneinsätze aus PE-UHMW: Morphologie und Mechanische Eigenschaften";
Vortrag: 4. Wiener Biomaterialsymposium,
Wien;
15.11.2010
- 17.11.2010; in: "Tagungsband - 4. Wiener Biomaterialsymposium",
(2010),
S. 19.
R. Markut-Kohl, M. Mosbeck, V. Archodoulaki, S. Seidler:
"Charakterisierung des mechanischen Verhaltens von Hüftpfannen aus PE-UHMW";
Vortrag: 13. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Halle-Merseburg;
29.06.2011
- 01.07.2011; in: "13. Problemseminar Deformation und Bruchverhalten von Kunststoffen",
(2011),
6 S.
R. Markut-Kohl, C. Schoberleitner, V. Archodoulaki, S. Seidler, G. Reinisch, A. Kolb:
"Chemical and morphological parameters in crosslinked PE-UHMW: influence of manufacturing and in vivo use on hip implants";
Vortrag: 10th Austrian Polymer Meeting and 2nd Austrian-Slowenian Polymer Meeting,
Leoben;
08.09.2010
- 10.09.2010; in: "ASPM2010 Austrian-Slovenian Polymer Meeting, Leoben 2010: Book of Abstracts",
(2010),
S. 78
- 79.
R. Markut-Kohl, C. Schoberleitner, V. Archodoulaki, S. Seidler, G. Reinisch, A. Kolb:
"Crosslinked PE-UHMW in hip implants: influence of manufacturing and use on structural parameters";
Vortrag: 14th International Conference Polymeric Materials,
Halle (Saale);
15.09.2010
- 17.09.2010; in: "14th International Conference Polymeric Materials",
(2010),
ISBN: 978-3-86829-282-4;
S. 45.
S. Pabisch, B. Feichtenschlager, G. Kickelbick, T. Koch, S. Seidler, H. Peterlik, M Sajjad:
"Structural characterization of surface-functionalized nanoparticles and nanocomposites by SAXS";
Poster: Annual Meeting of The Austrian Physical Society,
Innsbruck;
02.09.2009
- 04.09.2009; in: "Joint Annual Meeting of the Austrian Physical Society",
(2009),
S. 94 (253).
J. Pariona Lartiga, T. Koch, S. Seidler:
"Einfluss der Prüfkörperdicke auf die mittels EWF-Methode ermittelten Kennwerte.";
Poster: 11. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Merseburg;
20.06.2007
- 22.06.2007; in: "11. Problemseminar "Deformation und Bruchverhalten von Kunststoffen"",
(2007),
2 S.
M Sajjad, B. Feichtenschlager, S Pabisch, T. Koch, S. Seidler, H. Peterlik, G. Kickelbick:
"Effect of surface modification of silica nanoparticles on the thermomechanical properties of epoxy nanocomposites";
Poster: COST Action MP0701 Workshop,
Novi Sad;
23.09.2010
- 24.09.2010; in: "Book of Abstracts",
(2010),
S. 30.
M Sajjad, B. Feichtenschlager, S Pabisch, T. Koch, S. Seidler, H. Peterlik, G. Kickelbick:
"Epoxy nanocomposites with surface functionalized silica nanocomposites";
Poster: 10th Austrian Polymer Meeting and 2nd Austrian-Slowenian Polymer Meeting,
Leoben;
08.09.2010
- 10.09.2010; in: "ASPM2010 Austrian-Solenian Polymer Meeting, Leoben 2010: Book of Abstracts",
(2010),
S. 151.
M Sajjad, B. Feichtenschlager, S Pabisch, T. Koch, S. Seidler, H. Peterlik, G. Kickelbick:
"Properties of Epoxy/SiO2 - and Epoxy/ZrO2 - Nanocomposites";
Poster: 14th International Conference Polymeric Materials,
Halle (Saale);
15.09.2010
- 17.09.2010; in: "Proceedings Polymeric Materials 2010",
(2010),
ISBN: 978-3-86829-282-4;
Paper-Nr. P T41,
4 S.
M Sajjad, T. Koch, S. Seidler, B. Feichtenschlager, G. Kickelbick, H. Peterlik, S Pabisch:
"Effects of incorporation of silica and zirconia nanoparticles on the thermal and thermomechanical properties of polymer nanocomposites";
Poster: European Polymer Congress 2009,
Graz;
12.07.2009
- 17.07.2009; in: "EPF 09 - book of abstracts",
(2009),
S. 92.
M Sajjad, T. Koch, S. Seidler, B. Feichtenschlager, G. Kickelbick, H. Peterlik, S Pabisch:
"Effects of incorporation of silica and zirconia nanoparticles on the thermal and thermomechanical properties of polymer nanocomposites";
Poster: 12. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Merseburg;
24.06.2009
- 26.06.2009; in: "Tagungsband 12. Problemseminar",
(2009),
1 S.
M Sajjad, S. Seidler, B. Feichtenschlager, S Pabisch, T. Koch, H. Peterlik, G. Kickelbick:
"Thermo-mechanical properties of PMMA nanocomposites using functionalized silica nanoparticles";
Poster: 13. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Halle-Merseburg;
29.06.2011
- 01.07.2011; in: "13. Problemseminar Deformation und Bruchverhalten von Kunststoffen",
(2011),
4 S.
D. Salaberger, T. Koch, Y Voronko, S. Seidler, J. Kastner:
"Comparison of particle size distributions derived from 2D and 3D analysis for particle filled polymers";
Vortrag: Polychar 20, World Forum on Advanced Materials,
Dubrovnik;
26.03.2012
- 30.03.2012; in: "Book of Abstracts",
(2012),
ISBN: 978-953-6470-57-0;
S. 95.
Zusätzliche Informationen
U. Schubert, F.R. Kogler, Y. Gao, H. Peterlik, T. Koch, S. Seidler:
"Inorganic-organic hybrid polymers from metal oxide clusters as nanosized building blocks";
Vortrag: MC8: Advancing Materials by Chemical Design,
London;
02.07.2007
- 05.07.2007; in: "Advancing Materials by Chemical Design",
(2007),
S. 122.
S. Seidler:
"Bionik - Was können wir aus der Bionik lernen?";
Vortrag: 41. Int. Chemiefasertagung,
Dornbirn;
18.09.2002
- 20.09.2002; in: "41. Internationale Chemiefasertagung",
CD
(2002).
S. Seidler:
"Macro - Micro - Nano: Scaling Problems in Polymer Characteriszation and Testing";
Vortrag: POLYCHAR - World Forum on Advanced Materials,
Nara , Japan (eingeladen);
17.04.2006
- 22.04.2006; in: "POLYCHAR - World Forum on Advanced Materials",
(2006),
S. 22.
S. Seidler:
"Materialien von gestern - Werkstoffe von heute: Trends in der Kunststoffentwicklung";
Hauptvortrag: 3. Werkstoffkongress "Neu gegen Alt",
Leoben, Österreich (eingeladen);
03.11.2005
- 04.11.2005; in: "Neu gegen Alt: die richtige Anwendung traditioneller und neuer Werkstoffe",
(2005).
S. Seidler:
"Morphology - Mechanicl Property Correlations in Polymer Blends in Terms of Macromechanical and Micromechanical Testing Methods";
Hauptvortrag: International Conference on Advances in Polymer Blends, Composites, IPNs and Gels: Macro to Nano Scales (ICBC-2005),
Mahatma Gandhi University, Kottayam (India) (eingeladen);
21.03.2005
- 23.03.2005; in: "ICBC -2005",
(2005).
S. Seidler:
"Morphology-Property-Correlations by Means of Microhardness Measurements";
Vortrag: 6th Austrian Polymer Meeting,
Wien (Austria);
15.09.2003
- 17.09.2003; in: "6th Austrian Polymer Meeting, Wien (Austria)",
XXIst International H.F. Mark - Symposium,
(2003),
S. 33.
S. Seidler:
"Thermoanalytische Messmethoden - methodische Aussagefähigkeit und industrielle Aspekte";
Hauptvortrag: Werkstoffprüfung 2005,
Berlin (Germany) (eingeladen);
01.12.2005
- 02.12.2005; in: "Tagungsband Werkstoffprüfung 2005: Herausforderungen neuer Werkstoffe an die Forschung und Werkstoffprüfung (DVM Bericht 641)",
W. Grellmann (Hrg.);
DVM,
(2005),
ISSN: 1861-8154;
S. 247
- 256.
S. Seidler, T. Koch, R. Kogler, U. Schubert:
"Effectiveness of Zr6 clusters as cross-link agents for polystyrene";
Vortrag: Symposium on Functional Polymer Based Materials,
Jena/Deutschland;
03.04.2007
- 04.04.2007; in: "Proceedings - Symposium on Functional Polymer Based Materials - April 2007",
(2007),
S. 13
- 15.
S. Seidler, T. Koch, I. Kotter, W. Grellmann:
"Rissspitzendeformationsprozesse in Kunststoffen am Beispiel von Polypropylen";
Vortrag: 34. Tagung des DVM-Arbeitskreises Bruchvorgänge,
Freiberg;
19.02.2002
- 20.02.2002; in: "Fortschritte der Bruch- und Schädigungsmechnik",
DVM-Bericht 234
(2002),
S. 197
- 206.
S. Seidler, T. Koch, I. Kotter, W. Grellmann:
"Rissspitzendeformationsprozesse in Kunststoffen am Beispiel von Polypropylen";
Vortrag: Polymerwerkstoffe 2002,
Halle (Saale);
25.09.2002
- 27.09.2002; in: "Polymerwekstoffe 2002",
(2002),
S. 346
- 349.
J. Stampfl, R. Cano Vives, S. Seidler, R. Liska, F. Schwager, H. Gruber, A. Wöß, P. Fratzl:
"Rapid Prototyping - A Route for the Fabrication of Biomimetic Cellular Materials";
Vortrag: 1st International Conference on Advanced Reserch in Virtual and Rapid Prototyping, Leira (Portugal),
Leira (Portugal);
01.10.2003
- 04.10.2003; in: "1st International Conference on Advanced Research in Virtual and Rapid Prototyping, Leira (Portugal)",
Leira (Portugal)
(2003),
ISBN: 972-99023-0-5;
S. 659
- 666.
J. Stampfl, A. Wöß, P. Fratzl, S. Seidler:
"Rapid Prototyping of Ceramic and Polymer Cellular Materials";
Vortrag: 2nd European Medical and Biological Engineering Conference - EMBEC,
Wien;
04.12.2002
- 08.12.2002; in: "IFMBE Proceedings 2002",
(2002),
S. 172
- 173.
J. Stampfl, A. Wöß, S. Seidler:
"Mechanische Eigenschaften von durch Rapid Prototyping hergestellten zellularen Materialien";
Vortrag: 9. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Merseburg;
25.06.2003
- 27.06.2003; in: "Deformation und Bruchverhalten von Kunststoffen",
W. Grellmann (Hrg.);
CD-Rom,
(2003),
ISBN: 3-86010-710-0.
J. Stampfl, A. Wöß, S. Seidler:
"Rapid Prototyping zellularer Materialien";
Poster: Polymerwerkstoffe 2002,
Halle (Saale);
25.09.2002
- 27.09.2002; in: "Polymerwekstoffe 2002",
(2002),
S. 5.
J. Stampfl, A. Wöss, S. Seidler:
"Rapid Prototyping zellularer Materialien";
Poster: 9. Problemseminar Deformation und Bruchverhalten von Kunststoffen,
Merseburg (Germany);
25.06.2003
- 27.06.2003; in: "9. Problemseminar Deformation und Bruchverhalten von Kunststoffen, Merseburg (Germany)",
Merseburg (Deutschland)
(2003),
ISBN: 3-86010-710-0;
S. 423
- 424.
J. Stampfl, A. Wöß, S. Seidler, F. Schwager, R. Liska, H. Gruber:
"Water soluble photocurable resins for rapid prototyping applications";
Vortrag: 6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium,
Vienna, Austria;
15.09.2003
- 17.09.2003; in: "6. Austrian Polymer Meeting 21. International H. F. Mark-Symposium ",
(2003),
S. 70.
G. Weinwurm, S. Seidler, B. Neunteufl:
"Energie und Umwelt in der Forschung";
Vortrag: 60th Annual Meeting Austrian Physical Society,
Salzburg;
06.09.2010
- 10.09.2010; in: "60th Annual Meeting Austrian Physical Society",
ÖPG Österr. Physik. Gesellsch. (Hrg.);
Salzburg
(2010),
S. 10
- 11.
Zusätzliche Informationen
Vorträge und Posterpräsentationen (ohne Tagungsband-Eintrag)
C. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"Fabrication of bio-inspired ceramic composites";
Poster: Junior Euromat 2004,
Lausanne, Switzerland;
06.09.2004
- 09.09.2004.
C. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"Fabrication of bio-inspired ceramic composites";
Poster: Micro-mechanical properties of biomaterials, ECI-Conference,
Tomar, Portugal;
26.09.2004
- 30.09.2004.
Ch. Fritscher, H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"Fabrication of bio-inspired ceramic composites";
Poster: Micro-Mechanical Properties of Biomaterials,
Tomar, Portugal;
26.09.2004
- 30.09.2004.
S. Gäbler, T. Koch, J. Stampfl, S. Seidler, C. Heller, S. Baudis, R. Liska, R. Weidisch:
"Determination of the Viscoelastic Properties of Hydrogels based on Polyethylene Glycol Diacrylate (PEG-DA)";
Poster: Materials Science and Engineering - MSE 2008,
Nürnberg;
01.09.2008
- 04.09.2008.
Zusätzliche Informationen
E.J. Haberland, T. Koch, S. Burkert, A. Klemenz, S. Seidler:
"Pilotstudie zur Nanoindentation an Gehörknöchelchen-Hartschnitten";
Poster: 3rd Symposium Micro- and Nanostructures of Biological Systems,
Halle;
07.06.2004
- 08.06.2004.
T. Koch, S. Seidler:
"Einfluss der Zusammensetzung und Abkühlgeschwindigkeit auf die Mikrohärte von PP/HDPE-Blends";
Vortrag: Werkstoffwoche 2004,
München;
21.09.2004
- 23.09.2004.
H. Lichtenegger, Ch. Fritscher, J. Stampfl, S. Seidler, N. Hüsing, R. Liska:
"3-D templating of hierarchical materials";
Vortrag: MRS Spring Meeting,
San Francisco;
12.04.2004
- 16.04.2004.
H. Lichtenegger, J. Stampfl, N. Hüsing, R. Liska, S. Seidler:
"Fabrication of bio-inspired ceramic composites";
Poster: EUROMAT 2004,
Lausanne, Schweiz;
06.09.2004
- 09.09.2004.
R. Markut, S. Seidler:
"Nanoindentation of the Second Viennese Cross-Linked Hip Retrieval";
Vortrag: Materials for Improved Wear Resistance of Total Artificial Joints, COST Action 533 Biotrobology, 29.-31.10.2007,
Eibar/ Spain;
29.10.2007.
R. Markut-Kohl, S. Seidler, I. Carpentieri, L. Costa:
"Oxidation of PE-UHMW investigated with FTIR methods used in current research";
Vortrag: COST Action 533 "Materials for Improved Wear Resistance of Total Artificial Joints" , Workshop - 06.-08. Oct, 2008 in Athens, Greece (GR),
Athen;
06.10.2008
- 08.10.2008.
T. Papst, S. Seidler:
"Untersuchungen zur Realisierbarkeit eines Aluminium-CFK-Verbundträgers";
Poster: 14. DGM Symposium Verbundwerkstoffe und Werkstoffverbunde,
Wien;
02.07.2003
- 04.07.2003.
S. Seidler:
"Biokompatible Werkstoffe - Möglichkeiten und Grenzen am Beispiel des Kunststoffes Polyethylen";
Vortrag: Seminar des Institutes für Allgemeine Physik,
TU Wien (eingeladen);
22.05.2007.
Zusätzliche Informationen
S. Seidler:
"Hierarchisch strukturierte Materialien";
Vortrag: 1. Wiener Biomaterialsymposium,
Wien;
04.11.2004
- 05.11.2004.
S. Seidler:
"Macro - Micro - Nano: Scaling Problems in Mechanical Testing";
Vortrag: 1st Central European Workshop on Polymer Science and Technology,
Zlin, Czech Republic (eingeladen);
28.06.2006
- 29.06.2006.
S. Seidler:
"Makro - Mikro - Nano: Werkstoffcharakterisierung und Prüfung";
Vortrag: Vortragsreihe Know-how der TU Wien für die Wirtschaft: neue Werkstoffe: Entwicklung - Charakterisierung - Anwendung,
Wirtschaftskammer Wien;
22.06.2005.
J. Stampfl, S. Seidler, A. Wöß, P. Fratzl:
"Rapid Protoyping zellularer Materialien";
Vortrag: 49. Metallkundekolloquium: Werkstoffe - Einsatz und Entwicklungstendenzen,
Leoben;
07.04.2003
- 09.04.2003.
Patente
J. Stampfl, F. Schwager, R. Liska, S. Seidler, H. Gruber:
"Mit Strahlung härtbare wasserlösliche und/oder schmelzbare Zusammensetzung und deren Verwendung für Rapid Prototyping Verfahren";
Patent: Österreich,
Nr. 412.399;
eingereicht: 18.06.2003,
erteilt: 15.07.2004.
Dissertationen (eigene und begutachtete)
M. Dolezal:
"Elastizität und Dämpfung heterogener Werkstoffe";
Betreuer/in(nen), Begutachter/in(nen): H.P. Degischer, S. Seidler;
Inst. f. Werkstoffkunde und Materialprüfung,
2002.
V. Habrova:
"Self-Reinforcement of Polyolefins";
Betreuer/in(nen), Begutachter/in(nen): M. Raab, S. Seidler;
Werkstoffwissenschaft und Werkstofftechnologie,
2006;
Rigorosum: 27.10.2006.
T. Koch:
"Morphologie und Mikrohärte von Polypropylen-Werkstoffen";
Betreuer/in(nen), Begutachter/in(nen): S. Seidler, W. Grellmann;
Inst. f. Werkstoffkunde und Materialprüfung,
2003.
T. R. Kratochvilla:
"Morphological Considerations on Slow Crack Growth in Polyethylenes";
Betreuer/in(nen), Begutachter/in(nen): W. Steiner, S. Seidler, H. Dragaun;
Institut für Festkörperphysik,
2008;
Rigorosum: 23.04.2008.
S. Lüftl:
"Thermische Analyse von Polyoxymethylen (POM) zur Untersuchung der Auswirkungen des stofflichen Recyclings";
Betreuer/in(nen), Begutachter/in(nen): S. Seidler, F. Tataruch;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2005.
Zusätzliche Informationen
R. Markut-Kohl:
"Stucture-properties correlations in PE-UHMW: influence of consolidation, crosslinking, sterilization and in vivo use on hip implants";
Betreuer/in(nen), Begutachter/in(nen): S. Seidler, R. Liska;
Werkstoffwissenschaft und Werkstofftechnologie,
2012;
Rigorosum: 11.10.2012.
Zusätzliche Informationen
D. H. Pahr:
"Experimental and Numerical Investigations of Perforated FRP-Laminates";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, S. Seidler;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2003.
Zusätzliche Informationen
T. Peprnicek:
"Inorganic Filler in Polymer Environment";
Betreuer/in(nen), Begutachter/in(nen): M. Raab, S. Seidler;
Werkstoffwissenschaft und Werkstofftechnologie,
2006;
Rigorosum: 22.09.2006.
J. Rybnicek:
"Deformation and Fracture Behaviour of Recycled PC, ABS, PMMA Blends";
Betreuer/in(nen), Begutachter/in(nen): S. Seidler, R. Lach;
Czech Technical University Prague, Faculty of Mechanical Engineering,
2007;
Rigorosum: 11.09.2007.
M Sajjad:
"Effect of surface modified SiO2 and ZrO2 nanoparticles on the thermal and mechanical behavior of amorphous polymer nanocomposites";
Betreuer/in(nen), Begutachter/in(nen): S. Seidler, E. Nezbedova;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2012;
Rigorosum: 22.05.2012.
C. Schuecker:
"Mechanism Based Modeling of Damage and Failure in Fiber Reinforced Polymer Laminates";
Betreuer/in(nen), Begutachter/in(nen): H. E. Pettermann, S. Seidler;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2005.
Zusätzliche Informationen
G. Schuöcker:
"Innovative Ansätze in der Korrosionsschutzsanierung";
Betreuer/in(nen), Begutachter/in(nen): S. Seidler, E. Beyer;
Werkstoffwissenschaft und Werkstofftechnologie,
2005;
Rigorosum: 12.12.2005.
Diplom- und Master-Arbeiten (eigene und betreute)
R. Engertsberger:
"Prüfmethodenentwicklung zur RTM-Harzotimierung für CFK-Bauteile";
Betreuer/in(nen): S. Seidler;
Institut für Werkstoffkunde und Materialprüfung,
2003.
C. Karg:
"Entwicklung einer Apparatur zur biaxialen Verstreckung von Kunststofffolien";
Betreuer/in(nen): S. Seidler;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2006;
Abschlussprüfung: 09.10.2006.
J. Patzer:
"Entwicklung einer Temperiervorrichtung für eine Kunststoffverstreckapparatur";
Betreuer/in(nen): S. Seidler;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2007;
Abschlussprüfung: 30.08.2007.
T. Staffenberger:
"Prozessoptimirung einer Anlage zum Verkleben von CFK-Tragstrukturen";
Betreuer/in(nen): S. Seidler;
Institut für Werkstoffkunde und Materialprüfung,
2003.
E. Svoboda:
"Vergleichende Untersuchung zur Bestimmung von Materialkennwerten an Feinkorngraphiten hergestellt durch Vibrationsverdichtung, Isostatpressen und Schlickergießen";
Betreuer/in(nen): S. Seidler;
Werkstoffwissenschaft und Werkstofftechnologie,
2013;
Abschlussprüfung: 24.01.2013.
Wissenschaftliche Berichte
S. Seidler:
"Al-Stahl und Mg-Stahl Verbindungen";
Bericht für Magna MEC;
2002.
S. Seidler:
"Anwendung von DOE (Design of Experiments) im Spritzgießprozess von Thermoplasten im Autobil- und Elektroniksektor";
2002.
S. Seidler:
"Bestimmung der Härte nach Mohs an verkratztem Glas";
Bericht für Schreiner Consulting;
2002.
S. Seidler:
"Lichtmikroskopische Untersuchungen zur Gefügehomogenität von Cantilevern für Gurtschlösser";
Bericht für HB-Plastic Ges.m.b.H.;
2002.
S. Seidler:
"Materialanalyse von Dichtungsringen mittels Dynamischer Differenzkalorimetrie (DSC)";
2002.
S. Seidler:
"Materialanalyse von Sikaflex 265 mittels Thermogravimetrischer Analyse gekoppelt mit Massenspektrometrie (TGA-MS)";
2002.
S. Seidler:
"Schadensuntersuchung an PP-Rohren";
Bericht für Ingenieurbüro Strigl;
2002.
S. Seidler:
"Thermische Analyse (DSC und TGA/MS) zur Ermittlung der Schädigungsursache von O-Ringen aus undichten voreinstellbaren Thermostat Adaptern";
2002.
S. Seidler:
"Untersuchungen zum Aushärtungsverhalten von UV-härtendem Klebstoff";
Bericht für Philips Austria GmbH;
2002.
S. Seidler, J. Stampfl:
"Materialanalyse und Fraktographie an einem keramischen Insert für die Hüftendoprothese";
2005.
S. Seidler, C. Zaruba:
"Bruchflächenuntersuchung an Druckfedern aus Hastalloy C4";
2006.
S. Seidler, C. Zaruba:
"Bruchflächenuntertsuchung an einem Schrumpfring";
2006;
12 S.
S. Seidler, C. Zaruba:
"Mikroanalyse der metallischen Beschichtung an zwei Kennzeichenhaltern aus Kunststoff";
2002.
S. Seidler, C. Zaruba:
"Untersuchung an einm Gelenkwagenheber";
2006;
17 S.
S. Seidler, C. Zaruba:
"Untersuchung an Messingventilen als mögliche Ursache des Eintrages von Kupfer in ein Wasserleitungssystem";
2005;
20 S.
S. Seidler, C. Zaruba:
"Untersuchung eines gerissenen flexiblen Panzerschlauches";
2006;
22 S.
S. Seidler, C. Zaruba:
"Zerstörungsfreie metallographische Untersuchung an einem Turm einer Windkraftanlage nach Brandeinwirkung";
2006;
9 S.