TU Home
Diese Publikationsliste wurde automatisch aus den Publikationsdaten der TU Wien erstellt. Wenn Sie komplexere Suchabfragen vornehmen wollen, rufen Sie bitte die Seite "Publikationen der Fakultät" direkt auf, oder verwenden Sie die globale Suchfunktion der Publikationsdatenbank der Technischen Universität Wien!


Publikationsdatenbank Home  

Publikationsliste für
Branko Katalinic
als Autorin / Autor bzw. wesentlich beteiligte Person

245 Datensätze (1979 - 2019)

Die Publikationen der TU Wien sind erst ab dem Jahr 2002 vollzählig in der Publikationsdatenbank enthalten. Publikationen aus den Jahren vor 2002 können, müssen aber nicht in der Datenbank vorhanden sein.


Bücher und Buch-Herausgaben


J. Duda, I. Kuric, B. Katalinic (Hrg.):
"Proceedings of the 5th DAAAM International Workshop "CA Systems and Technologies", ";
DAAAM International Vienna, Vienna, 2000, ISBN: 3-901509-16-x.

B. Katalinic (Hrg.):
"Annals of DAAAM for 2003 & Proceedings ";
DAAAM International Vienna, Wien, 2003, ISBN: 3-901-509-34-8; 564 S.

B. Katalinic (Hrg.):
"Annals of DAAAM for 2004 & Proceedings of the 15th International Manufacturing & Automation: Globalisation- Technology - Men - Nature";
DAAAM International Vienna, Wien, 2004, ISBN: 3-901509-42-9; 518 S.

B. Katalinic (Hrg.):
"Annals of DAAAM for 2005 & Proceedings";
DAAAM International Vienna, Vienna, 2005, ISBN: 3-901509-46-1; 414 S.

B. Katalinic (Hrg.):
"Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, practice and Education"";
DAAAM International Vienna, Wien, 2009, ISBN: 978-3-901509-70-4; 2060 S.

B. Katalinic:
"Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions""";
in Buchreihe "Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions"", Buchreihen-Herausgeber: B. Katalinic; herausgegeben von: DAAAM International Vienna; DAAAM International Vienna, Wien, 2010, ISBN: 978-3-901509-73-5, 1694 S.

B. Katalinic (Hrg.):
"Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: Power of Knowledge and Creativity"";
DAAAM International Vienna, Wien, 2011, ISBN: 978-3-901509-83-4; 1782 S.

B. Katalinic (Hrg.):
"Annals of DAAAM for 2012 & Proceedings of the 23rd International DAAAM Symposium "Make Harmony between Technology and Nature, and Your Mind will Fly as a BIrd"";
DAAAM International Vienna, Wien, 2012, ISBN: 978-3-901509-91-9; 1183 S.

B. Katalinic (Hrg.):
"Annals of DAAAM International for 1998 & Proceedings of the 9th International DAAAM Symposium, 22-24th October 1998, Cluj-Napoca, Romania";
DAAAM International Vienna, Vienna, 1998, ISBN: 3-901509-08-9; 595 S.

B. Katalinic (Hrg.):
"Annals of DAAAM International for 1999 & Proceedings of the 10th International DAAAM Symposium, 21-23rd October 1999, Vienna, Austria";
DAAAM International Vienna, Vienna, 1999, ISBN: 3-901509-10-0; 636 S.

B. Katalinic (Hrg.):
"Annals of DAAAM International for 2000 & Proceedings of the 11th International DAAAM Symposium, 19-21st October 2000, Opatija, Croatia";
DAAAM International Vienna, Vienna, 2000, ISBN: 3-901509-13-5; 548 S.

B. Katalinic (Hrg.):
"Annals of DAAAM International for 2001 & Proceedings of the 12th International DAAAM Symposium, 24-27th October 2001, Jena, Germany";
DAAAM International Vienna, Vienna, 2001, ISBN: 3-901509-19-4; 578 S.

B. Katalinic (Hrg.):
"Annals of DAAAM International for 2002 & Proceedings of the 13th International Symposium "Intelligent Manufacturing & Automation"";
DAAAM International Vienna, Vienna, 2002, ISBN: 3-901509-29-1; 676 S.

B. Katalinic:
"Covic D.: Invention of Team";
DAAAM International Vienna & Universtiy of Mostar, Vienna - Mostar, 2003, 3-901-509-25-4; 240 S.

B. Katalinic (Hrg.):
"DAAAM International Scientific Book 2002";
DAAAM International Vienna, Vienna, 2002, ISBN: 3-901509-30-5; 713 S.

B. Katalinic (Hrg.):
"DAAAM International Scientific Book 2003";
DAAAM International Vienna, Wien, 2003, ISBN: 3-901-509-36-4; 646 S.

B. Katalinic (Hrg.):
"DAAAM International Scientific Book 2004";
DAAAM International Vienna, Wien, 2004, ISBN: 3-901509-38-0; 722 S.

B. Katalinic (Hrg.):
"DAAAM International Scientific Book 2005";
DAAAM International Vienna, Vienna, 2005, ISBN: 3-901509-43-7; 720 S.

B. Katalinic:
"DAAAM International Scientific Book 2009";
in Buchreihe "DAAAM Internations Scientific Book 2009", Buchreihen-Herausgeber: B. Katalinic; herausgegeben von: DAAAM International Vienna; DAAAM International Vienna, Wien, 2009, ISBN: 978-3-901509-69-8, 1004 S.

B. Katalinic (Hrg.):
"DAAAM International Scientific Book 2010";
DAAAM International Vienna, Wien, 2010, ISBN: 978-3-901509-74-2; 808 S.

B. Katalinic (Hrg.):
"DAAAM International Scientific Book 2011";
DAAAM International Vienna, Wien, 2011, ISBN: 978-3-901509-84-1; 642 S.

B. Katalinic (Hrg.):
"Decision Making under Risk";
DAAAM International Vienna, Wien, 2004, ISBN: 3-901509-44-5; 86 S.

B. Katalinic:
"Industrieroboter und flexible Fertigungssysteme für Drehteile";
VDI Verlag GmbH, Düsseldorf, 1990, ISBN: 3-18-401027-9; 182 S.

B. Katalinic:
"International Journal of Advanced Robotic Systems Volume 1, Number 1";
in Buchreihe "International Journal of Advanced Robotic Systems", Buchreihen-Herausgeber: B. Katalinic; herausgegeben von: Wien; DAAAM International Vienna, Wien, 2004, (eingeladen), 57 S.

B. Katalinic (Hrg.):
"Proceedings of 7th DAAAM International Symposium "Product & Manufacturing: Integration, Flexibility, Intelligence", 17-19th October 1996";
DAAAM International Vienna, Vienna, 1996, ISBN: 3-901509-02-x; 526 S.

B. Katalinic (Hrg.):
"Proceedings of 8th DAAAM International Symposium "Intelligent Manufacturing & Automation, 23-25th October 1997, Dubrovnik, Croatia";
DAAAM International Vienna, Vienna, 1997, ISBN: 3-901509-04-6; 412 S.

B. Katalinic (Hrg.):
"Proceedings of International Symposium "Automation and Metrology", 5th November 1990, Vienna, Austria";
DAAAM International Vienna, Vienna, 1990, 159 S.

B. Katalinic (Hrg.):
"Proceedings of International Symposium "Flexible and Intelligent Automation", 4-6th November 1992, Budapest, Hungary";
DAAAM International Vienna, Vienna, 1992, 211 S.

B. Katalinic, B. Buchmeister:
"International Journal of Simulation Modelling";
in Buchreihe "International Journal of Simulation Modelling IJSIMM", Buchreihen-Herausgeber: B. Katalinic; herausgegeben von: Wien; DAAAM International Vienna, Wien, 2019, ISSN: 1726-4529, 199 S.

B. Katalinic, B. Buchmeister:
"International Journal of Simulation Modelling Volume 4 Number 1";
in Buchreihe "International Journal of Simulation Modelling IJSIMM", Buchreihen-Herausgeber: B. Katalinic; herausgegeben von: Wien; DAAAM International Vienna, Wien, 2005, 47 S.

B. Katalinic, M. Kljajin (Hrg.):
"Proceedings of the 1st DAAAM International Conference: Advanced Technologies for the Developing Countries - ATDC-02";
DAAAM International Vienna & Strossmayer University of Osijek - Faculty of Mechanical Engineering, Slavonski Brod, Vienna, 2002, ISBN: 3-901509-32-1; 548 S.

B. Katalinic, M. Kljajin, I Budic (Hrg.):
"Proceedings of the 4th DAAAM International Conference on Advanced Technologies for Developing Countries";
DAAAM International Vienna, Slavonski Brod, 2005, ISBN: 953-6048-29-9; 701 S.

B. Katalinic, H. Osanna (Hrg.):
"Proceedings of International Symposium "Man, Technique, Enviroment", 16-18th September 1993, Brno, Czech Republic";
DAAAM International Vienna, Vienna, 1993, 408 S.

B. Katalinic, H. Osanna, J. Balic, F. Cus (Hrg.):
"Proceedings of 5th DAAAM International Symposium "Automation und Metrology: Challange and Chance", 26-29th October 1994, Maribor, Slovenia";
DAAAM International Vienna, Vienna, 1994, 535 S.

B. Katalinic, P.H. Osanna, J. Gawlik (Hrg.):
"Proceedings of 6th DAAAM International Symposium "Intelligent Manufacturing Systems", Oktober 26-28, 1995, Krakow, Poland";
DAAAM International Vienna, Vienna, 1995, ISBN: 3-901509-01-1; 404 S.

B. Katalinic, D. Tufekcic, R. Selo (Hrg.):
"Proceedings of the 2nd DAAAM Internationa Conference on Advanced Technologies for Developing Countries";
DAAAM International Vienna & University of Tuzla, Vienna, 2003, ISBN: 3-901-509-35-6; 463 S.

B. Katalinic, I. VEza, B. Bilic (Hrg.):
"Proceedings of the 3rd DAAAM International Conference on Advanced Technologies for Development Countries";
DAAAM International Vienna & University of Split, Vienna-Split, 2004, ISBN: 953-6114-68-2; 442 S.

B. Katalinic, E. Wessely (Hrg.):
"Proceedings of the 4th Workshop "Human Factor and Environmentalist", 5th December 2002, Kosice, Slovakia";
DAAAM International Vienna, Vienna, 2002, ISBN: 3-901509-37-2; 122 S.

I. Kuric, B. Katalinic (Hrg.):
"Proceedings of the 4th DAAAM International Workshop "CA Systems and Technologies: Advanced Methodology of Process Planning"", 12-13th October 1999, Zilina, Slovak Republic";
DAAAM International Vienna, Vienna, 1999, ISBN: 3-901509-12-7.

I. Kuric, B. Katalinic (Hrg.):
"Proceedings of the 6th DAAAM International Workshop "CA Systems and Technologies", 25-26th September 2001, Sulov, Slovak Republic";
DAAAM International Vienna, Vienna, 2001, ISBN: 3-901509-27-5.

V. Majstorovic, B. Katalinic, D. Covic, V. Visekruna (Hrg.):
"Proceedings of the 2nd International Conference Business Systems Management - UPS 2001, University of Mostar, Mostar, 2002-05-31 2002-06-02";
DAAAM International Vienna & Universtiy of Mostar, Vienna, 2001, ISBN: 3-901509-26-7; 333 S.

V. Majstorovic, B. Katalinic, D. Covic, V. Visekruna (Hrg.):
"Proceedings of the 3rd International Conference UPS 2004 Business Systems Management";
DAAAM International Vienna & Universtiy of Mostar, Vienna - Mostar, 2004, ISBN: 3-901509-24-0; 303 S.

J. Papstel, B. Katalinic (Hrg.):
"Proceedings of the 1st International Conference of DAAAM National Estonia, 25 - 27th September 1997, Tallinn Technical University, Estonia";
DAAAM International Vienna, Vienna, 1997, ISBN: 3-901509-07-0.

J. Papstel, B. Katalinic (Hrg.):
"Proceedings of the 2nd International Conference of DAAAM National Estonia " Industrial Engineering - Activities Targeted to SME";
Tallinn Technical University, Tallinn, 2000, ISBN: 9985-894-21-9.

J. Papstel, B. Katalinic (Hrg.):
"Proceedings of the 3rd International Conference of DAAAM National Estonia "Industrial Engineering - New Challenges to SME";
DAAAM National Estonia & Tallinn Technical University, Tallinn, 2002, ISBN: 9985-59-272-7; 267 S.

J. Papstel, B. Katalinic (Hrg.):
"Proceedings of the 4th International Conference Industrial Engineering - New Challenges to SME";
DAAAM International Vienna & DAAAM National Estonia, Tallinn, 2004, ISBN: 9985-894-59-6; 301 S.

K. Velisek, B. Katalinic (Hrg.):
"VÝROBNÉ SYSTÉMY I.";
Slovenská Technická Univerzita v Bratislave, Bratislava, 2004, ISBN: 80-227-2009-7; 209 S.

E. Wessely, B. Katalinic (Hrg.):
"Proceedings of the 2nd Workshop "Intelligent Manufacturing Systems", Technical University of Kosice, Slovakia, 2001-11-29";
DAAAM International Vienna, Vienna, 2001, ISBN: 3-901509-18-6; 93 S.


Zeitschriftenartikel


B. Katalinic:
"Bionic Assembly Systems: Selforganizing Complex Flexible Assembly System";
Acta Mechanica Slovaca, Vol. 6 (2002), No. 2/2002; S. 15 - 20.

B. Katalinic, V. Pryanichnikov, K. Ueda, P. Cesarec, I. Kukushkin, R. Kettler:
"Bionic Assembly System: working modes, control and scheduling";
International Journal of Industrial Engineering and Management, Vol 3 (2012), 3; S. 121 - 131.

B. Ljoljic, B. Katalinic, K. Stuja:
"Optimisation of Flexible Assembly System Using Simulation";
International Journal of Simulation Modelling, Vol. 1 (2002), No 1/2002; S. 16 - 22.

B. Ljoljic, B. Katalinic, K. Stuja, V. Kordic:
"Simulation of Complex Flexible Assembly System";
Acta Mechanica Slovaca, Vol.6 (2002), 2/2002; S. 117 - 122.

V. Pryanichnikov, B. Katalinic, A. Platonov:
"Application of autonomius mobile robots AMUR for modelling of elements of selforganising systems";
Intelligent and Adoptive Robots (eingeladen), Vol.6 (2011), 1-2; S. 8 - 18.


Buchbeiträge


K. Hrubina, A. Jadlovska, B. Katalinic, E. Wessely:
"Optimal Control Problems for Systems Solved by Algorithms of Algebraic Methods";
in: "DAAAM International Scientific Book 2004", B. Katalinic (Hrg.); herausgegeben von: Wien; DAAAM International Vienna, Wien, 2004, (eingeladen), ISBN: 3-901509-38-0, S. 283 - 294.

K. Hrubina, J Novak-Marcincin, A. Jadlovska, B. Katalinic:
"Optimal control of complex processes and vector optimalization";
in: "DAAAM International Scientific Book 2005", herausgegeben von: DAAAM International Vienna; DAAAM International Vienna, Vienna, 2005, (eingeladen), ISBN: 3-901509-43-7, S. 225 - 252.

A. Jadlovska, K. Hrubina, J Novak-Marcincin, B. Katalinic:
"Algorithms for optimal decision making and processes control";
in: "DAAAM International Scientific Book 2005", herausgegeben von: DAAAM International Vienna; DAAAM International Vienna, Vienna, 2005, (eingeladen), ISBN: 3-901509-43-7, S. 253 - 290.

B. Katalinic:
"Design and Scheduling of Next Generation of Self-organising Assembly Systems";
in: "DAAAM International Scientific Book 2002", B. Katalinic (Hrg.); DAAAM International Vienna, Vienna, 2002, ISBN: 3-901509-30-5, S. 299 - 314.

B. Katalinic:
"Foreword";
in: "DAAAM International Scientific Book 2003", B. Katalinic (Hrg.); herausgegeben von: DAAAM International Vienna; DAAAM International Vienna, Vienna, 2003, ISBN: 3-901-509-36-4, S. 3 - 4.

B. Katalinic:
"Foreword";
in: "DAAAM International Scientific Book 2005", herausgegeben von: DAAAM Internaitonal Vienna; DAAAM International Vienna, Vienna, 2005, (eingeladen), ISBN: 3-901509-43-7, S. 3.

B. Katalinic, P. Cesarec, R. Kettler:
"Integration of Subordination and self Organisation in working Scenarios of Bionic Assembly System";
in: "Concurrent Product and Technology Development", CEEPUS Network CII-HR-0108, Rijeka, 2009, ISBN: 978-953-968999-3, S. 305 - 320.

B. Katalinic, V. Kordic:
"Integration of Subordination and Self Organisation in Working Scenarios of Bionic Assembly System";
in: "DAAAM International Scientific Book 2003", B. Katalinic (Hrg.); herausgegeben von: DAAAM International Vienna; DAAAM International Vienna, Wien, 2003, (eingeladen), ISBN: 3-901-509-36-4, S. 319 - 330.

B. Katalinic, A. Lazinica:
"Autonomous mobile robots in assembly applications";
in: "DAAAM International Scientific Book 2005", herausgegeben von: DAAAM Internaitonal Vienna; DAAAM International Vienna, Vienna, 2005, (eingeladen), ISBN: 3-901509-43-7, S. 323 - 332.

V. Kordic, B. Katalinic, B. Ljoljic, K. Stuja:
"Toward Autonomous Agent Design Concept";
in: "DAAAM International Scientific Book 2002", herausgegeben von: B. Katalinic; DAAAM International Vienna, Vienna, 2002, ISBN: 3-901509-30-5, S. 315 - 323.

Z Kremljak, B. Katalinic:
"Preface";
in: "Decision Making Under Risk", B. Katalinic (Hrg.); herausgegeben von: Wien; DAAAM International Vienna, Wien, 2004, (eingeladen), ISBN: 3-901509-44-5, S. 4.

B. Ljoljic, B. Katalinic, V. Kordic, K. Stuja:
"Strategical Planning for a Manufacturing Company";
in: "DAAAM International Scientific Book 2002", B. Katalinic (Hrg.); herausgegeben von: B. Katalinic; DAAAM International Vienna, Vienna, 2002, ISBN: 3-901509-30-5, S. 343 - 349.

M. Stopper, B. Katalinic, K. Stuja:
"The advanced concept for planning of flexible manufacturing system for motor gears";
in: "DAAAM International Scientific Book 2005", herausgegeben von: DAAAM International Vienna; DAAAM International Vienna, Vienna, 2005, (eingeladen), ISBN: 3-901509-43-7, S. 627 - 636.

K. Stuja, B. Katalinic, B. Ljoljic, V. Kordic:
"Scheduling of Flexible Manufacturing Systems for Rotational Parts in a Case of Limited Production Means";
in: "DAAAM International Scientific Book 2002", herausgegeben von: B. Katalinic; DAAAM International, Vienna, 2002, ISBN: 3-901509-30-5, S. 555 - 564.


Beiträge in Tagungsbänden


B. Angerer, B. Katalinic, A. Omicini:
"A Semantic Escience Portal for International Scientific and Academic Cooperation";
in: "Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education"", B. Katalinic (Hrg.); herausgegeben von: DAAAM International Vienna; DAAAM International Vienna, Wien, 2009, ISBN: 978-3-901509-70-4, S. 1727 - 1728.

I. Bogovic, B. Barisic, B. Katalinic, M. Krsulja, Z. Car:
"Digitizing System Atos - Measuring Turbo Compressor Housing";
in: "Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: "Power of Knowledge and Creativity"", B. Katalinic (Hrg.); herausgegeben von: DAAAM International Vienna; DAAAM International Vienna, Wien, 2011, ISBN: 978-3-901509-83-4, S. 1367 - 1368.

V. Despot, B. Barisic, B. Katalinic, M. Krsulja, Z. Car:
"Radioscopic Measurement on Fuel Filter Support: Inspection for Health of Material";
in: "Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: "Power of Knowledge and Creativity"", B. Katalinic (Hrg.); herausgegeben von: DAAAM International Vienna; DAAAM International Vienna, Wien, 2011, ISBN: 978-3-901509-83-4, S. 1359 - 1360.

B. Gastermann, F. Luftensteiner, M. Stopper, B. Katalinic:
"Multiple Stage Production Planning in Plain Manufacturing Environments";
in: "Annals of DAAAM for 2012 & Proceedings of the 23rd International DAAAM Symposium: "Make Harmony between Technology and Nature, and Your Mind will Fly Free as a Bird"", B. Katalinic (Hrg.); herausgegeben von: DAAAM Vienna International; DAAAM International Vienna, Wien, 2012, ISBN: 978-3-901509-91-9, Paper-Nr. Volume 23, No.1 CDRom Version, 4 S.

B. Gastermann, M. Stopper, B. Katalinic:
"Apects of the Production Control System Conwip in Small and Medium Sized Industrial Companies";
in: "Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: "Power of Knowledge and Creativity"", B. Katalinic (Hrg.); herausgegeben von: DAAAM International Vienna; DAAAM International Vienna, Wien, 2011, ISBN: 978-3-901509-83-4, S. 0621 - 0622.

B. Gastermann, M. Stopper, B. Katalinic:
"Outline of an Autonomous Control Concept for Continuous Flow Production Using RFID and Agend-based Services";
in: "Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions"", B. Katalinic (Hrg.); herausgegeben von: DAAAM International Vienna; DAAAM International Vienna, Wien, 2010, ISBN: 978-3-901509-73-5, S. 863 - 864.

M. Hodak, B. Barisic, B. Katalinic, M. Krsulja, Z. Car:
"Flatness of mechanical Interface of housing filter: Comparing Methods";
in: "Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: "Power of Knowledge and Creativity"", B. Katalinic (Hrg.); herausgegeben von: DAAAM International Vienna; DAAAM International Vienna, Wien, 2011, ISBN: 978-3-901509-83-4, S. 1381 - 1382.

M. Jurjevic, B. Barisic, B. Katalinic, M. Krsulja, Z. Car:
"Suitable Devices for Measuring Roughness on Oil Filter Housing";
in: "Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: "Power of Knowledge and Creativity"", B. Katalinic (Hrg.); herausgegeben von: DAAAM International Vienna; DAAAM International Vienna, Wien, 2011, ISBN: 978-3-901509-83-4, S. 1351 - 1352.

M. Jurjevic, M. Krsulja, B. Katalinic, Z. Car, L. Sikulec:
"Automatic Measurement of Rotational Speed and Lathe Maintenance";
in: "Annals of DAAAM for 2012 & Proceedings of the 23rd International DAAAM Symposium: "Make Harmony between Technology and Nature, and Your Mind will Fly Free as a Bird"", B. Katalinic (Hrg.); herausgegeben von: DAAAM International Vienna; DAAAM International Vienna, Wien, 2012, ISBN: 978-3-901509-91-9, Paper-Nr. Volume 23, No.1 CDRom Version, 4 S.

B. Katalinic:
"DAAAM International Network: Background, History, Aims, Structure, Activities & Future";
in: "Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education"", B. Katalinic (Hrg.); herausgegeben von: DAAAM International Vienna; DAAAM International Vienna, Wien, 2009, ISBN: 978-3-901509-70-4, S. 14 - 48.

B. Katalinic:
"Engineers for knowledge based Society";
in: "Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions"", B. Katalinic (Hrg.); herausgegeben von: DAAAM International Vienna; DAAAM International Vienna, Wien, 2010, ISBN: 978-3-901509-73-5, S. 1 - 2.

B. Katalinic:
"Preface";
in: "Proceedings of the 4th DAAAM International Conference on Advanced Technologies for Developing Countries", herausgegeben von: Josip Juraj Sotrssmayer University of Osijek; DAAAM International Vienna, Slavonski Brod, 2005, (eingeladen), ISBN: 953-6048-29-9, S. 1.

B. Katalinic:
"The 20th DAAAM World Symposium";
in: "Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education"", B. Katalinic (Hrg.); herausgegeben von: DAAAM International Vienna; DAAAM International Vienna, Wien, 2009, ISBN: 978-3-901509-70-4, S. 3 - 4.

B. Katalinic:
"The 21st DAAAM World Symposium";
in: "Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions"", B. Katalinic (Hrg.); herausgegeben von: DAAAM International Vienna; DAAAM International Vienna, Wien, 2010, ISBN: 978-3-901509-73-5, S. 3 - 4.

B. Katalinic:
"Welcome to 22nd DAAAM World Symposium";
in: "Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: "Power of Knowledge and Creativity"", B. Katalinic (Hrg.); DAAAM International Vienna, Wien, 2011, (eingeladen), ISBN: 978-3-901509-83-4, S. 3 - 4.

B. Katalinic, B. Angerer:
""Automation transition concerning the virtual organization"";
in: "Annals of DAAAM for 2004 & Proceedings of 15th International DAAAM Symposium", B. Katalinic (Hrg.); herausgegeben von: DAAAM International Vienna; DAAAM International Vienna, Wien, 2004, (eingeladen), ISBN: 3-901509-42-9, S. 013 - 014.

B. Katalinic, P. Cesarec, M. Stopper, R. Kettler:
"Self-Organizing Systems in Nature and Technology";
in: "Proceedings of the 7th International Conferencf DAAAM Baltic Indsutrial Engineering", R Kyttner (Hrg.); herausgegeben von: DAAAM International Vienna & BALTECH Consortium; DAAAM International Vienna, Wien, 2010, (eingeladen), S. 346 - 351.

B. Katalinic, A. Jadlovska, K. Hrubina, E. Wessely:
"Optimal control of complex processes";
in: "Annals of DAAAM for 2004 & Proceedings of 15th International DAAAM Symposium", B. Katalinic (Hrg.); herausgegeben von: DAAAM International Vienna; DAAAM International Vienna, Wien, 2004, (eingeladen), ISBN: 3-901509-42-9, S. 177 - 178.

B. Katalinic, A. Javorova:
"Flexible assembly workstation";
in: "Annals of DAAAM for 2004 & Proceedings of 15th International DAAAM Symposium", B. Katalinic (Hrg.); herausgegeben von: DAAAM International Vienna; DAAAM International Vienna, Wien, 2004, (eingeladen), ISBN: 3-901509-42-9, S. 191 - 192.

B. Katalinic, V. Kordic:
"Reconfigurable Assembly Systems Based on Reactive Autonomous Robots";
in: "Proceedings of the 3rd International Conference UPS 2004 Business Systems Management", V. Majstorovic, B. Katalinic, D. Covic, V. Visekruna (Hrg.); herausgegeben von: Mostar; DAAAM International Vienna & Universtiy of Mostar, Vienna - Mostar, 2004, (eingeladen), ISBN: 3-901509-24-0, S. 99 - 104.

B. Katalinic, V. Kordic:
"Self-Organizing Assembly System";
in: "Proceedings of the 3rd DAAAM International Conference on Advanced Technologies for Developing Countries", B. Katalinic, I. VEza, B. Bilic (Hrg.); herausgegeben von: Split; DAAAM International Vienna & University of Split, Vienna - Split, 2004, (eingeladen), ISBN: 953-6114-68-2, S. 137 - 145.

B. Katalinic, N. Majdandzic:
"Preface";
in: "Proceedings of the 1st DAAAM International Conference: Advanced Technologies for the Developing Countries - ATDC 02", B. Katalinic, M. Kljajin (Hrg.); DAAAM International Vienna & Strossmayer University of Osijek - Faculty of Mechanical Engineering, Slavonski Brod, 2002, (eingeladen), ISBN: 3-901509-32-1, S. 3.

B. Katalinic, J. Papstel:
"Preface";
in: "Proceedings of the 3rd International Conference of DAAAM National Estonia "Industrial Engineering - New Challenges to SME", J. Papstel, B. Katalinic (Hrg.); DAAAM National Estonia & Tallinn Technical University, 2002, ISBN: 9985-59-272-7, S. 4.

B. Katalinic, P. Post, A. Eliseev, K. Ueda, S. Takakuwa:
"Contents";
in: "Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education"", B. Katalinic (Hrg.); herausgegeben von: DAAAM International Vienna; DAAAM International Vienna, Wien, 2009, ISBN: 978-3-901509-70-4, S. 49 - 77.

B. Katalinic, D. Tufekcic:
"Preface";
in: "Proceedings of the 2nd DAAAM International Conference on Advanced Technologies for Developing Countries", B. Katalinic, D. Tufekcic, R. Selo (Hrg.); herausgegeben von: DAAAM International Vienna; DAAAM International Vienna & University of Tuzla, Vienna - Tuzla, 2003, ISBN: 3-901-509-35-6, S. 3 - 4.

R. Kettler, P. Cesarec, B. Katalinic:
"Cleaning of Metal Wires by using Rotating Thermal Plasma";
in: "Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education"", B. Katalinic (Hrg.); herausgegeben von: DAAAM International Vienna; DAAAM International Vienna, Wien, 2009, ISBN: 978-3-901509-70-4, S. 0025 - 0026.

T. Komenda, X. Feng, B. Katalinic:
"Optimum Drive-Train Design of an Industrial Robot Family";
in: "Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education"", B. Katalinic (Hrg.); herausgegeben von: DAAAM International Vienna; DAAAM International Vienna, Wien, 2009, ISBN: 978-3-901509-70-4, S. 1435 - 1436.

I. Kukushkin, B. Katalinic, P. Cesarec, R. Kettler:
"Reconfiguration in Self-Organizing Systems";
in: "Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: "Power of Knowledge and Creativity"", B. Katalinic (Hrg.); herausgegeben von: DAAAM International Vienna; DAAAM International Vienna, Wien, 2011, ISBN: 978-3-901509-83-4, S. 0641 - 0642.

I. Kukushkin, B. Katalinic, P. Cesarec, D. Zdyb, R. Kettler:
"Modeling of Mobile Robot Behavior for Line-Less Bionic Assembly System";
in: "Annals of DAAAM for 2012 & Proceedings of the 23rd International DAAAM Symposium: "Make Harmony between Technology and Nature, and Your Mind will Fly Free as a Bird"", B. Katalinic (Hrg.); herausgegeben von: DAAAM International Vienna; DAAAM International Vienna, Wien, 2012, ISBN: 978-3-901509-91-9, Paper-Nr. Volume 23, No.1 CDRom Version, 6 S.

V. Majstorovic, B. Katalinic:
"Foreward";
in: "Proceedings of the 3rd International Conference UPS 2004 Business Systems Management", V. Majstorovic, B. Katalinic, V. Visekruna, D. Covic (Hrg.); herausgegeben von: Mostar; DAAAM International Vienna & Universtiy of Mostar, Vienna - Mostar, 2004, (eingeladen), ISBN: 3-901509-24-0, S. 3.

H. Orsolits, D. Sirkett, B. Katalinic:
"New Magnetic Gearbox Concept: Prototype Design and Construction";
in: "Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education"", B. Katalinic (Hrg.); herausgegeben von: DAAAM International Vienna; DAAAM International Vienna, Wien, 2009, ISBN: 978-3-901509-70-4, S. 0457 - 0458.

J. Papstel, B. Katalinic:
"Preface";
in: "Proceedings of the 4th International Conference Industrial Engineering - New Challenges to SME", B. Katalinic, J. Papstel (Hrg.); herausgegeben von: DAAAM International Vienna; DAAAM International Vienna & DAAAM National Estonia, Vienna-Tallinn, 2004, (eingeladen), ISBN: 9985-894-59-6, S. 4.

M. Radosevic, B. Katalinic, P. Cesarec, S. Stimac, B. Barisic:
"Making Device for Torque Initiation which is applied in Torque Wrench Calibration";
in: "Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions"", B. Katalinic (Hrg.); herausgegeben von: DAAAM International Vienna; DAAAM International Vienna, Wien, 2010, ISBN: 978-3-901509-73-5, S. 1521 - 1522.

S. Stimac, B. Katalinic, P. Cesarec, M. Radosevic, B. Barisic:
"Measurement of the Closing Force on the Medical Bottles";
in: "Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions"", B. Katalinic (Hrg.); herausgegeben von: DAAAM International Vienna; DAAAM International Vienna, Wien, 2010, ISBN: 978-3-901509-73-5, S. 1523 - 1524.

Z. Tekic, I Cosic, B. Katalinic:
"Framing Knowledge in Business Context";
in: "Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions"", B. Katalinic (Hrg.); herausgegeben von: DAAAM International Vienna; DAAAM International Vienna, Wien, 2010, ISBN: 978-3-901509-73-5, S. 555 - 556.

Z. Tekic, I Cosic, B. Katalinic:
"Innovation and Knowledge Creation Mechanisms";
in: "Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: "Power of Knowledge and Creativity"", B. Katalinic (Hrg.); herausgegeben von: DAAAM International Vienna; DAAAM International Vienna, Wien, 2011, ISBN: 978-3-901509-83-4, S. 0419 - 0420.

Z. Tekic, I Cosic, B. Katalinic:
"The Missing Link - Knowledge Creation and Innovation";
in: "Annals of DAAAM for 2012 & Proceedings of the 23rd International DAAAM Symposium: "Make Harmony between Technology and Nature, and Your Mind will Fly Free as a Bird"", B. Katalinic (Hrg.); herausgegeben von: DAAAM Vienna International; DAAAM International Vienna, Wien, 2012, ISBN: 978-3-901509-91-9, Paper-Nr. Volume 23, No.1 CDRom Version, 4 S.

Z. Tekic, B. Katalinic, I Cosic:
"Key Characteristics of Knowledge";
in: "Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education"", B. Katalinic (Hrg.); herausgegeben von: DAAAM International Vienna; DAAAM International Vienna, Wien, 2009, ISBN: 978-3-901509-70-4, S. 1747 - 1748.

I. VEza, B. Katalinic:
"Preface";
in: "Proceedings of the 3rd DAAAM International Conference on Advanced Technologies for Developing Countries", B. Katalinic, I. VEza, B. Bilic (Hrg.); herausgegeben von: Split; DAAAM International Vienna & University of Split, Vienna - Split, 2004, (eingeladen), ISBN: 953-6114-68-2, S. 3.

E. Wessely, B. Katalinic:
"Preface";
in: "Proceedings of the 3rd Workshop 'Intelligent Manufacturing Systems'", B. Katalinic, E. Wessely (Hrg.); herausgegeben von: DAAAM Slovakia; DAAAM International Vienna, Vienna, 2001, ISBN: 3-901509-31-3, S. 5.


Vorträge und Posterpräsentationen (mit Tagungsband-Eintrag)


J. Balic, F. Cus, M. Prasnicki, B. Katalinic:
"Computer-Aided Engineering System for Die/Mold Design and Manufacture";
Vortrag: 3rd International Conference on Automation Technology, Taipei, Taiwan; 06.07.1994 - 09.07.1994; in: "Proc. 3rd International Conference on Automation Technology", (1994), S. 45 - 47.

M. Gronalt, B. Katalinic, M. Schmid:
"Engpaßanalyse eines flexiblen Fertigungssystems mit Hilfe von Computersimulation";
Vortrag: 2nd International Symposium Danubia-Adria Association for Automation and Metrology, Strbske Pleso, Slovakia; 09.12.1991 - 11.12.1991; in: "Proc. of 2nd International Symposium Danubia-Adria Association for Automation and Metrology", House of Technology, Bratislava, (1991), ISBN: 80-233-0225-6; S. 118 - 119.

E. Hajrizi, S Shabani, B. Katalinic:
"Computer Based Optimal Design of Asynchronous Devices";
Vortrag: 8th International DAAAm Symposium, Dubrovnik; 23.10.1997 - 25.10.1997; in: "Proceedings of 8th International DAAAm Symposium", (1997), S. 107 - 108.

B. Katalinic:
"20 Basic Characteristics of Doctor of Technical Sciences and Way how to Develop them";
Vortrag: 23rd International DAAAM Symposium, Zadar; 24.10.2012 - 27.10.2012; in: "Annals of DAAAM for 2012 & Proceedings of the 23rd International DAAAM Symposium: "Make Harmony between Technology and Nature, and Your Mind will Fly Free as a Bird"", B. Katalinic (Hrg.); Annals of DAAAM for 2012 & Proceeding of the 23rd International DAAAM Symposium/DAAAM International Vienna, 23/1 (2012), ISSN: 2304-1382; Paper-Nr. Volume 23, No.1 CDRom Version, 1 S.

Zusätzliche Informationen

B. Katalinic:
"Ablaufplanung für komplexe flexible Fertigungssysteme";
Vortrag: 4th Symposium "MMA`90", Novi Sad; 25.09.1990 - 27.09.1990; in: "Proc. 4th Symposium "MMA`90"", (1990), S. 381 - 394.

B. Katalinic:
"Aktueller Stand und Entwicklungstendenzen von Produktionssystemen";
Vortrag: 1st International Conference Business System Management, Mostar; 26.09.1997 - 27.09.1997; in: "Proceedings of 1st International Conference Business System Management", (1997), S. 123 - 130.

B. Katalinic:
"Analiza, sinteza i optimiranje logistike vodjenja kompleksnih fleksibilnih sustava";
Vortrag: 10th International Symposium BIAM`90, Zagreb; 30.06.1989; in: "Proc. 10th International Symposium BIAM`90", (1989), S. #.

B. Katalinic:
"Auslegung und Steuerung von flexiblen Montagesystemen";
Vortrag: 4. Internationales DAAAM Symposium "Automation und Metrologie: Mensch, Technik, Umwelt", Brno, Tschechien; 16.09.1993 - 18.09.1993; in: "4. Internationales DAAAM Symposium "Automation und Metrologie: Mensch, Technik, Umwelt", (1993), S. 145 - 146.

B. Katalinic:
"Auslegung und Steuerung von flexiblen Montagesystemen of die Montage von Geräteelektromotoren";
Vortrag: 2nd International Conference on Production Engineering, Zagreb; 18.11.1993 - 21.11.1993; in: "2nd International Conference on Production Engineering", (1993), S. 35 - 37.

B. Katalinic:
"Berechnung der Roboter -Trägheitsmatrizen";
Vortrag: Internationale Tagung "Moderne Fertigung und Fertigungs-Meßtechnik", Wien; 02.04.1986 - 04.04.1986; in: "Proc. Internationale Tagung "Moderne Fertigung und Fertigungs-Meßtechnik"", (1986), S. 41 - 52.

B. Katalinic:
"Berechnung der Trägheitsmatrizen des Knickarmroboters Prototyp 1 & 2 der Fa. Voest-Alpine AG";
Vortrag: Final Report, Forschungsinstitut "Advanced Robotics", Institut Nr. 311, TU-Wien,, Wien; 1985; in: " Final Report, Forschungsinstitut "Advanced Robotics", Institut Nr. 311, TU-Wien, ", (1985), S. # - #.

B. Katalinic:
"Berechnung dynamischer Koeffizienten bei der Konstruktion von Industrierobotern";
Vortrag: 8th International Conference "BIAM'86", Zagreb; 16.06.1986 - 18.06.1986; in: "Proc. 8th International Conference "BIAM'86"", (1986), S. 180 - 184.

B. Katalinic:
"BIONIC ASSEMBLY SYSTEMS : Concept design and scheduling of next generation of self-organizing flexible assembly system in CIM environment";
Vortrag: 1st DAAAM International Conference on Advanced Technologies for Developing Countries, Slavonski Brod (eingeladen); 12.09.2002 - 14.09.2002; in: "PROCEEDINGS of the 1st DAAAM International Conference on Advanced Technologies for Developing Countries", B. Katalinic, M. Kljajin (Hrg.); (2002), S. 459 - 470.

B. Katalinic:
"Bionic Assembly Systems: Design and Scheduling of Next Generation of Self-organizing Complex Flexible Assembly Systems";
Vortrag: 2nd International Conference "Business Systems Management"- UPS 2001, Mostar; 31.05.2001 - 02.06.2001; in: "Proceedings of the 2nd International Conference "Business Systems Management"- UPS 2001", V. Majstorovic, B. Katalinic, D. Covic, V. Visekruna (Hrg.); DAAAM International Vienna & University of Mostar, Mostar & Vienna (2001), ISBN: 3-901509-26-7; S. 101 - 108.

B. Katalinic:
"Bionic Assembly Systems: Next Generation of Self-Organizing Complex Flexible Assembly Systems";
Vortrag: 3rd International Conference of DAAAM National Estonia "Industrial Engineering - New Challenges to SME, Tallinn, Estonia (eingeladen); 25.04.2002 - 27.04.2002; in: "Proceedings of the 3rd International Conference "Industrial Engineering - New Challenges to SME"", J. Papstel, B. Katalinic (Hrg.); DAAAM National Estonia & Tallinn Technical University, Tallinn (2002), ISBN: 9985-59-272-7; S. 96 - 99.

B. Katalinic:
"Characteristics of Modern Industrial Robots and their Applications";
Vortrag: 6th International Conference "BIAM'82", Zagreb; 14.06.1982 - 16.06.1982; in: "Proc. 6th International Conference "BIAM'82"", (1982), S. 57 - 76.

B. Katalinic:
"CIM - Present State and Development Trends";
Vortrag: 2nd International Conference on Production Engineering, Zagreb (eingeladen); 18.11.1993 - 21.11.1993; in: "2nd International Conference on Production Engineering", (1993), S. 26 - 27.

B. Katalinic:
"Complex Flexible Manufacturing Systems - Design of Control Structures and Scheduling Strategies";
Vortrag: 25th CIRP International Seminar, Bled, Slovenia; 22.04.1993 - 23.04.1993; in: "25th CIRP International Seminar", (1993), S. 25 - 26.

B. Katalinic:
"Control Structure and Scheduling Strategies for flexibel Assembly System - ATB";
Vortrag: Vienna University of Technology, Vienna, Austria; 21.02.1993 - 24.02.1993; in: "Final Repot , Vienna University of Technology", (1993), S. 12 - 13.

B. Katalinic:
"DAAAM International Vienna: Background, History, Aims, Structure, Activities & Future";
Vortrag: 14th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Focus on Reconstruction and Development', Sarajevo (eingeladen); 22.10.2003 - 25.10.2003; in: "Annals of DAAAM for 2003 & Proceedings of the 14th International DAAAM Symposium", B. Katalinic (Hrg.); DAAAM International Vienna, Vienna (2003), ISBN: 3-901-509-34-8; S. 8 - 26.

B. Katalinic:
"Demonstration Board for the Simulation of Digital Control Units";
Vortrag: 27th International Conference "JUREMA'82", Zagreb; 1982; in: "Proc. 27th International Conference "JUREMA'82"", (1982), S. 17 - 20.

B. Katalinic:
"Design of Scheduling Structures and Strategies for Complex Flexible Manufacturing Systems";
Vortrag: International Conference on Computer Integrated Manufacturing, CIM 96, Zakopane, Poland; 14.05.1996 - 17.05.1996; in: "Proceedings of International Conference on Computer Integrated Manufacturing", (1996), S. 145 - 152.

B. Katalinic:
"Design and Scheduling of Next Generation Self-organizing Complex Flexible Assembly System Called Biologic Assembly Systems";
Vortrag: 2nd Asian Symposium on Industrial Automation and Robotics - ASIAR 2001, Bangkok, Thailand (eingeladen); 17.05.2001 - 18.05.2001; in: "Proceedings of the 2nd Asian Symposium on Industrial Automation and Robotics - ASIAR 2001", N. Afzulpukar (Hrg.); Asian Institute of Technology, Bangkok (2001), ISBN: 974-8208-34-6; S. 310 - 316.

B. Katalinic:
"Design Methodology of Scheduling Strategies and Scenarios of Complex Flexible Systems";
Vortrag: 29th CIRP International Seminar on Manufacturing Systems, Osaka, Japan (eingeladen); 11.05.1997 - 13.05.1997; in: "Proceedings of the 29th CIRP International Seminar on Manufacturing Systems", (1997), S. 179 - 184.

B. Katalinic:
"Design Methodology of Scheduling Strategies and Scenarios of Complex Flexible Systems";
Vortrag: Publischer Scientific and Scientific and Technical Association of Mechanical Engineering, Sofia (eingeladen); 30.11.1997; in: "Scientific Reports, Year 4, No. 8", (1997), S. 5 - 10.

B. Katalinic:
"Design of Control Structures and Strategies for Complex Flexible Manufacturing Systems";
Vortrag: International Conference on Production Engineering, Zagreb, Croatia; 12.06.1992 - 15.06.1992; in: "Proc. International Conference on Production Engineering", (1992), S. 24 - 26.

B. Katalinic:
"Design of Control Structures and Strategies for Complex FMS";
Vortrag: 3rd DAAAM International Symposium "Flexible and Intelligent Automation", Budapest, Hungary; 05.11.1992 - 06.11.1992; in: "Proc. of 3rd DAAAM International Symposium "Flexible and Intelligent Automation"", (1992), S. 93 - 94.

B. Katalinic:
"Design of Control Structures and Strategies of Complex Flexible Manufacturing Systems";
Vortrag: CSFR National Conference, Kosice; 09.09.1992 - 11.09.1992; in: "Prof. CSFR National Conference", (1992), S. 15 - 16.

B. Katalinic:
"Design of Control Structures for Complex Flexible Manufacturing Systems";
Vortrag: IFAC Workshop on Automatic Control Structures for Complex Flexible Manufacturing Systems, Istanbul; 03.06.1992 - 05.06.1992; in: "IFAC Workshop on Automatic Control for Quality and Productivity "ACQP'92"", (1992), S. 26 - 33.

B. Katalinic:
"Development and Applications of Industrial Robots";
Vortrag: Conference "Implementation of Electronic in Mechanical Engineering", Fojnica; 17.02.1983 - 19.02.1983; in: "Proc. Conference "Implementation of Electronic in Mechanical Engineering"", (1983), S. 191 - 198.

B. Katalinic:
"Development Trends in mechanical Robotics";
Hauptvortrag: International Youth Conference, St. Petersburg (eingeladen); 06.09.2011 - 08.09.2011; in: "Mechatronics and Robotics", V. Lopota (Hrg.); (2011), ISBN: 978-5-905-18389-8; S. 5 - 6.

B. Katalinic:
"Eröffnungsvortrag - DAAAM International Network: Past - Present - Future";
Hauptvortrag: 22nd International DAAAM Symposium, Wien (eingeladen); 23.11.2011 - 26.11.2011; in: "Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: "Power of Knowledge and Creativity"", B. Katalinic (Hrg.); DAAAM International Vienna, (2011), ISBN: 978-3-901509-83-4; S. 55 - 56.

B. Katalinic:
"Flexibles Montagesystem für die Montage von Geräteelektromotoren - Auslegung und Steuerung";
Vortrag: Zeitschrift des Österreichischen Verbandes für Elektrotechnik, Wien / New York; 03.02.1994; in: "Zeitschrift des Österreichischen Verbandes für Elektrotechnik", (1994), S. 257 - 261.

B. Katalinic:
"Globalisation and Technology: New Possibilities and Risk Factors";
Vortrag: 14 th DAAAM International Symposium, Sarajevo (eingeladen); 22.10.2003 - 25.10.2003; in: "Annals of DAAAM for 2003 & Proceedings of the 14th International DAAAM Symposium", B. Katalinic (Hrg.); DAAAM International Vienna, Vienna (2003), ISBN: 3-901-509-34-8; S. 205 - 210.

B. Katalinic:
"Industrial Robots and FMS - state of art and development trends";
Vortrag: International Conference KoREMA´92, Zagreb, Croatia; 26.04.1992 - 29.04.1992; in: "Proc. International Conference KoREMA'92", (1992), S. 14 - 16.

B. Katalinic:
"Intelligent Manufacturing Systems als logisches Ergebnis der Evolution von Produktionsystemen";
Vortrag: 13th International Conference BIAM´96, Zagreb; 18.06.1996 - 21.06.1996; in: "Proceedings of the 13th International Conference BIAM´96", (1996), S. A-1 - A-4.

B. Katalinic:
"Intelligent Scheduling of Robotized Flexible Assembly System";
Vortrag: International Conference ISMCR-93, Torino, Italy; 21.09.1993 - 24.09.1993; in: "Proc. International Conference ISMCR-93", (1993), S. 126 - 127.

B. Katalinic:
"Kinematical Characteristics of Industrial Robot's Trajectories";
Vortrag: 5th International Conference "BIAM'80", Zagreb; 09.06.1980 - 11.06.1980; in: "Proc. 5th International Conference "BIAM'80"", (1980), S. 6 - 44.

B. Katalinic:
"Kinematical Structures of Nowadays Industrial Robots";
Vortrag: 7th International Conference "BIAM'84", Zagreb; 30.06.1984; in: "Proc. 7th International Conference "BIAM'84"", (1984), S. 35 - 46.

B. Katalinic:
"Megatrends in der Automatisierung der Produktion, Elektrotechnik und Informationstechnik";
Vortrag: Zeitschrift des Österreichischen Verbandes für Elektrotechnik, Wien / New York; 1996; in: "Zeitschrift des Österreichischen Verbandes für Elektrotechnik", (1996), S. 169 - 171.

B. Katalinic:
"Meßtechnik zur Optimierung bzw. Rationalisierung bei der Planung von Robotern und bei deren Steuerung und Überwachung";
Vortrag: 4. Österreichisches Kolloquium für Experimentelle Dehnungs- und Spannungsanalyse, St.Wolfgang; 22.10.1987 - 24.10.1987; in: "Proc. "4. Österreichisches Kolloquium für Experimentelle Dehnungs- und Spannungsanalyse"", (1987), S. #.

B. Katalinic:
"New Engineers for the Future: Action Balanced between Intelligence, Wisdom and Ethics";
Vortrag: 10th Losinj Days of Bioethics, Mali Losinj (eingeladen); 15.05.2011 - 18.05.2011; in: "10th Losinj Days of Bioethics", A. Covic (Hrg.); (2011), S. 39 - 42.

B. Katalinic:
"Optimierung der Abläufe eines komplexen FFS durch heuristische Vorgangsweise zur Lösung von Konfliktsituationen, 175-Jahre Vienna University of Technology";
Vortrag: Internationales Symposium "Automatisation und Meßtechnik", Wien; 05.11.1990; in: "Proc. Internationales Symposium "Automatisation und Meßtechnik"", (1990), S. 65 - 66.

B. Katalinic:
"Optimierung der Maschinenbelegung in flexiblen Fertigungssystemen unter Berücksichtigung der im System vorhandenen Engpässe";
Vortrag: XI. Werkzeugmaschinen Kolloquium, Wissenschaftlicher Verein für Maschinenbau, Budapest; 1988; in: "Proc. XI. Werkzeugmaschinen Kolloquium, Wissenschaftlicher Verein für Maschinenbau", (1988), S. #.

B. Katalinic:
"Optimierung der Maschinenbelegung in flexiblen Fertigungssystemen unter Berücksichtigung der Systemengpässe";
Vortrag: 9th International Symposium BIAM`88, Zagreb; 13.06.1988 - 15.06.1988; in: "Proc. 9th International Symposium BIAM`88", (1988), S. 211 - 214.

B. Katalinic:
"Optimisation of Use and Management of Production Resources in Complex FMS";
Vortrag: Workshop: Manufacturing Resource Planning, Brussels, Belgium; 10.05.1993 - 11.05.1993; in: "Proceedings of Workshop: Manufacturing Resource Planning", (1993), ISBN: 2-87352-009-4; S. 14 - 17.

B. Katalinic:
"Organisation and Scheduling of Transport System for Böhler Plant";
Vortrag: Vienna University of Technology, Institut No. 311 & Interuniversitäry Center for CIM, Wien; 30.11.1991; in: "Final Report, Vienna University of Technology, Institut No. 311 & Interuniversitäry Center for CIM", (1991).

B. Katalinic:
"Robotics - Short List of Terms and Definitions";
Vortrag: Supported by the COMETT Programme of the Commission of the EUROPEAN Communities, Aachen, Germany; 11.10.1993 - 06.11.1993; in: "Supported by the COMETT Programme of the Commission of the EUROPEAN Communities", (1993), S. 45 - 46.

B. Katalinic:
"Robots in Modern Industry";
Vortrag: 8th International Conference - Society of Plastics and Rubber Engineers, Zagreb; 07.03.1988 - 11.03.1988; in: "Proc. 8th International Conference - Society of Plastics and Rubber Engineers", (1988), S. 1 - 8.

B. Katalinic:
"Simulation of FMS for New Sling Factory, Just-in-Time Concept, Kone Sowitsch Company";
Vortrag: Institut für Fertigungstechnik & Forschungsinstitut "Advanced Robotics", Institut Nr. 311, TU-Wien, Wien; 30.06.1991; in: "Final Report, Institut für Fertigungstechnik & Forschungsinstitut "Advanced Robotics"", (1991).

B. Katalinic:
"Simulation und FMS";
Vortrag: 2nd International Symposium Danubia-Adria Association for Automation and Metrology, Strbske Pleso, Slovakia; 09.12.1991 - 11.12.1991; in: "5. Proc. of 2nd International Symposium Danubia-Adria Association for Automation and Metrology", (1991), ISBN: 80-233-0225-6; S. 72 - 73.

B. Katalinic:
"Speech by Prof. Dr. Branko Katalinic";
Vortrag: Dies Academicus - Doctor honoris causa Speech, Mostar (eingeladen); 15.12.2003; in: "Prof. dr. sc. Branko Katalinic", University of Mostar, (2003), S. 24 - 29.

B. Katalinic:
"Stability Tests of Systems by Using Bode's or Nichols' Diagrams and a Digital Computer";
Vortrag: 27th International Conference "JUREMA'82", Zagreb; 1982; in: "Proc. 27th International Conference JUREMA'82", (1982), S. 21 - 24.

B. Katalinic:
"Technical Product as a Materialisation of Engineers Idea and Design Strategy of Nature";
Vortrag: 4th Workshop "Human Factor and Environmntalist", Kosice, Slovakia (eingeladen); 05.12.2002 - 05.12.2002; in: "Proceedings of the 4th Workshop "Human Factor and Environmentalist"", B. Katalinic, E. Wessely (Hrg.); DAAAM International Vienna, (2002), ISBN: 3-901509-37-2; S. 9 - 12.

B. Katalinic:
"Technical Product as Materialisation of Engineers Idea and Design Strategies of Natuer";
Vortrag: 1st International Textile, Clothing & Design Conference - Magic World of Textile - ITC&DC, Dubrovnik (eingeladen); 06.10.2002 - 09.10.2002; in: "Proceedings of the 1st International Textile, Clothing & Design Conference - Magic World of Textile, ITC&DC", Z. Dragicevic (Hrg.); University of Zagreb, Faculty of Textile Technologies, (2002), ISBN: 953-96408-8-1; S. 3 - 7.

B. Katalinic:
"Trends, Definitions, Population and Welding Applications of Modern Industrial Robots";
Vortrag: International Conference "Mechanization, Automation, Robotics and Computer Application in Welding", Wien; 01.10.1987 - 03.10.1987; in: "Proc. International Conference "Mechanization, Automation, Robotics and Computer Application in Welding"", (1987), S. 159 - 170.

B. Katalinic, J. Balic, I. Pahole:
"Scheduling of Complex Flexible Manufacturing Systems- Methodology Design";
Vortrag: Journal of Mechanical Engineering, Ljubljana; 30.05.1998 - 30.06.1998; in: "Journal of Mechanical Engineering (44) No. 5-6", (1998), S. 168 - 174.

B. Katalinic, S. Celar:
"Computersimulation für die Auslegung und Steuerung von FFS";
Vortrag: 7th International DAAAM Symposium, Wien; 17.10.1996 - 19.10.1996; in: "Proceedings of the 7th International DAAAM Symposium", (1996), S. 203 - 204.

B. Katalinic, S. Celar:
"Discrete-event Based Computer Simulation of Complex Flexible Manufacturing Systems";
Vortrag: 13th International Conference BIAM´96, Zagreb; 18.06.1996 - 21.06.1996; in: "Proceedings of the 13th International Conference BIAM´96", (1996), S. J-1 - J-4.

B. Katalinic, S. Celar:
"Simulation als Werkzeug bei der Auslegung und Steuerung des FFS für Blechbearbeitung";
Vortrag: 12th International Conference BIAM'94, Zagreb; 23.06.1994 - 24.06.1994; in: "Proceedings of the 12th International Conference BIAM’94", (1994), S. 9 - 12.

B. Katalinic, I Cosic, V. Katic, Z. Tekic:
"Engineers for knowledge based Society";
Vortrag: 17th Conference an Development Trends, Kopaonik (eingeladen); 07.03.2011 - 10.03.2011; in: "Europe 2020: Knowledge based Society", V. Katic (Hrg.); (2011), S. 13 - 21.

B. Katalinic, A. Divic:
"Auslegung einer robotisierten Zelle für die Kommissionierung von Teilen vor der Montage";
Vortrag: 4. Internationales DAAAM Symposium "Automation und Metrologie: Mensch, Technik, Umwelt", Brno, Tschechien; 16.09.1993 - 18.09.1993; in: "4. Internationales DAAAM Symposium "Automation und Metrologie: Mensch, Technik, Umwelt"", (1993), S. 147 - 148.

B. Katalinic, S. Egorov:
"Subordination and Selforganisation in the Bionic Assembly Systems";
Vortrag: 13th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Learning from Nature', Vienna; 23.10.2002 - 26.10.2002; in: "Annals of DAAAM for 2002 & Proceedings of the 13th International DAAAM Symposium", B. Katalinic (Hrg.); DAAAM International Vienna, Vienna (2002), ISBN: 3-901509-29-1; S. 253 - 254.

B. Katalinic, E Fabian:
"Automatische Identifikation als Baustein der CIM-Lösungen in Produktionbetrieben";
Vortrag: 13th International Conference BIAM´96, Zagreb; 18.06.1996 - 21.06.1996; in: "Proceedings of the 13th International Conference BIAM´96", (1996), S. F-1 - F-4.

B. Katalinic, E Fabian:
"Konzept eines sophistieziertes Manipulationssystems für komplexe logistische Aufgaben";
Vortrag: 7th International DAAAM Symposium, Vienna; 17.10.1996 - 19.10.1996; in: "Proceedings of the 7th International DAAAM Symposium", (1996), S. 205 - 206.

B. Katalinic, E. Hajrizi:
"Comparison of Working Scenarios by "GA - Optimizer" - an Intelligent Software Modul for Optimization of Complex FMS Scheduling";
Vortrag: 11the International DAAAM Symposium, Opatija; 19.10.2000 - 21.10.2000; in: " Annals of DAAAM for 2000 & Proceedings of the 11the International DAAAM Symposium, Opatija", B. Katalinic (Hrg.); (2000), ISBN: 3-901509-13-5; S. 8S - 9S.

B. Katalinic, E. Hajrizi:
"Die Struktur eines intelligenten Moduls für Leitstandsoftware komplexer FFS";
Vortrag: 8th International Scientific Conference Co-Mat-Tech, Trnava; 19.10.2000 - 20.10.2000; in: "Proceedings of the 8th International Scientific Conference Co-Mat-Tech 2000", (2000), ISBN: 80-227-1413-5; S. 127 - 132.

B. Katalinic, A. Kavaz:
"Scheduling Algorithm of Sequence of Orders in a Linear Assembly Line with Limited Buffers";
Vortrag: 14th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Focus on Reconstruction and Development', Sarajevo (eingeladen); 22.10.2003 - 25.10.2003; in: "Annals of DAAAM for 2003 & Proceedings of the 14th International DAAAM Symposium", B. Katalinic (Hrg.); DAAAM International Vienna, Vienna (2003), ISBN: 3-901-509-34-8; S. 213 - 214.

B. Katalinic, V. Kordic:
"Bionic Assembly System: Concept, Structure and Function";
als Vortrag angenommen für: 5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering, Bath, United Kingdom (eingeladen); 05.04.2004 - 07.04.2004; in: "Proceedings of 5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering", (2004).

B. Katalinic, V. Kordic:
"Bionic Assembly Systems: Autonomous Agents in Self Organising Complex Flexible Assembly System in CIM Environment";
Vortrag: 4th International Workshop on Emergent Synthesis - IWES`02, Kobe, Japan (eingeladen); 09.05.2002 - 10.05.2002; in: "Proceedings of 4th International Workshop on Emergent Synthesis", K. Ueda (Hrg.); Kobe University, (2002), S. 3 - 12.

B. Katalinic, V. Kordic:
"Control System of Transport Class Assembly Units of Biologic Assembly System";
Vortrag: 14 th DAAAM International Symposium, Sarajevo, Bosnia and Hezegovina; 22.10.2003 - 25.10.2003; in: "Annals of DAAAM for 2003 & Proceedings of the 14 th DAAAM International Symposium", B. Katalinic (Hrg.); DAAAM International Vienna, Vienna (2003), ISBN: 3-901509-34-8; S. 213 - 214.

B. Katalinic, V. Kordic:
"Reconfigurable assembly by reactive autonomous robots";
als Vortrag angenommen für: International Symposium on Robotics and Automation - ISRA 2004, Queretaro, Mexico; 25.08.2004 - 27.08.2004; in: "Proceedings of International Symposium on Robotics and Automation - ISRA 2004", (2004).

B. Katalinic, V. Kordic:
"Simple reactive robots in assembly domain";
als Vortrag angenommen für: 8th International Conference on Mechatronics Technology, Hanoi, Vietnam; 08.11.2004 - 12.11.2004; in: "Proceedings of 8th International Conference on Mechatronics Technology", (2004).

B. Katalinic, V. Kordic, I Cosic:
"Bionic Assembly System";
Vortrag: HIPNEF 2004, Vrnjacka Banja (eingeladen); 19.05.2004 - 21.05.2004; in: "29th Scientific-Expert Conference Proceedings", M Stojiljkovic et al. (Hrg.); Mechanical Faculty, University of Nis, 29 (2004), ISBN: 86-80587-31-1; S. 35 - 42.

B. Katalinic, V. Kordic, M. Stopper:
"Interaction of Subordination and Self-Organisation in Working Scenarios of Bionic Assembly System";
Vortrag: The 3rd Asian Conference on Automation and Robotics - ASIAR 03, Bangkok, Thailand (eingeladen); 08.05.2003 - 09.05.2003; in: "Proceedings of the 3rd Asian Conference on Automation and Robotics - ASIAR 03", Asian Institute of Technology, Bangkok, Thailand (2003), ISBN: 974-229-467-4; S. 136 - 141.

B. Katalinic, A. Lazinica:
"Design of Autonomous Mobile Robots in Bionic Assembly System: Project Concept";
Vortrag: 14th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Focus on Reconstruction and Development', Sarajevo (eingeladen); 22.10.2003 - 25.10.2003; in: "Annals of DAAAM for 2003 & Proceedings of the 14th International DAAAM Symposium", B. Katalinic (Hrg.); DAAAM International Vienna, Vienna (2003), ISBN: 3-901-509-34-8; S. 215 - 216.

B. Katalinic, A. Lazinica, M. Merdan:
"Bionic Assembly System and Evolutionary Robotics: Research Project Concept";
Vortrag: 6th International Conference Modern Technologies in Manufacturing, Cluj-Napoca (eingeladen); 02.10.2003 - 04.10.2003; in: "Annals of MTeM for 2003 & Proceedings of 6th International Conferece Modern Technologies in Manufacturing", C. Gyenge (Hrg.); Technical University of Cluj-Napoca, (2003), S. 267 - 270.

B. Katalinic, B. Ljoljic:
"Optimal Variant Determination of Wall - Unit Housing";
Vortrag: 11the International DAAAM Symposium, Opatija; 19.10.2000 - 21.10.2000; in: "Annals of DAAAM for 2000 & Proceedings of the 11the International DAAAM Symposium", B. Katalinic (Hrg.); (2000), ISBN: 3-901509-13-5; S. 215 - 216.

B. Katalinic, B. Ljoljic:
"Warehousing System as Component Reduction of Business Expenditures";
Vortrag: 2nd International Conference "Business Systems Management"- UPS 2001, Mostar; 31.05.2001 - 02.06.2001; in: "Proceedings of the 2nd International Conference "Business Systems Management"- UPS 2001", V. Majstorovic, B. Katalinic, D. Covic, V. Visekruna (Hrg.); DAAAM International Vienna & University of Mostar, Mostar & Vienna (2001), ISBN: 3-901509-26-7; S. 109 - 111.

B. Katalinic, M. Merdan, A. Lazinica:
"An Algorithm for Solving Assembly Station Overloading in Bionic Assembly System";
Vortrag: 14th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Focus on Reconstruction and Development', Sarajevo (eingeladen); 22.10.2003 - 25.10.2003; in: "Annals of DAAAM for 2003 & Proceedings of the 14th International DAAAM Symposium", B. Katalinic (Hrg.); DAAAM International Vienna, Vienna (2003), ISBN: 3-901-509-34-8; S. 217 - 218.

B. Katalinic, J. Nanasi:
"Effizienzerhöhung von FFS durch Intelligente Vernetzung";
Vortrag: 7th International DAAAM Symposium, Wien; 17.10.1996 - 19.10.1996; in: "Proceedings of the 7th International DAAAM Symposium", (1996), S. 207 - 208.

B. Katalinic, J. Nanasi:
"Ein Expertensystem für die Planung auf dem FFS- Leitstand";
Vortrag: Proceedings of International Conference on Computer Integrated Manufacturing, Zakopane, Poland; 14.05.1996 - 17.05.1996; in: "Proceedings of International Conference on Computer Integrated Manufacturing , CIM 96, Volume II", (1996), S. 153 - 158.

B. Katalinic, J. Nanasi:
"Expertensysteme bei der intelligenten Steuerung von komplexen flexiblen Systemen";
Vortrag: 12th International Conference BIAM'94, Zagreb, Kroatien; 23.06.1994 - 24.06.1994; in: "Proceedings of the 12th International Conference BIAM'94", (1994), ISBN: 953-6037-03-3; S. 57 - 60.

B. Katalinic, Z. Sarson:
"A Practical Example of Industrial Robot's Application";
Vortrag: 5th International Conference "BIAM'80", Zagreb; 09.06.1980 - 11.06.1980; in: "Proc. 5th International Conference BIAM'80", (1980), S. 6 - 95.

B. Katalinic, K. Stuja, S. Pllana:
"Arena: Enterprise Wide Modeling and Simulation";
Vortrag: 2nd DAAAM International Workshop "Intelligent Manufacturing Systems", Kosice; 30.11.2000 - 30.11.2000; in: "Proceedings of the 2nd DAAAM International Workshop "Intelligent Manufacturing Systems"", B. Katalinic (Hrg.); (2000), ISBN: 3-901509-18-6; S. 37 - 38.

B. Katalinic, T. Surina:
"Inertial Load by Industrial Robots";
Vortrag: International Conference "Informatica '79", Bled; 1979; in: "Proc. International Conference "Informatica '79"", (1979), S. 6 - 107.

B. Katalinic, T. Udiljak:
"Comlex Flexible Manufacturnig Systems: Design Methodology of Working Scenarios and Schedulig Strategies";
Vortrag: IASTED International Conference "Robotics and Manufacturing", Banff, Canada; 26.07.1998 - 29.07.1998; in: "Proceedings of the IASTED International Conference "Robotics and Manufacturing"", (1998), S. 81 - 88.

B. Katalinic, T. Udiljak:
"Production Systems and Automation: Actual State and Development Trends (in Croatien)";
Vortrag: Journal of Textile Technology, Vol 48 br. 1, Zagreb; 31.01.1999; in: "Journal of Textile Technology, Vol 48 br. 1", (1999), S. 1 - 7.

B. Katalinic, T. Udiljak, H. Park:
"Design Methodology of Scheduling Strategies and Scenarios of Complex Flexible Systems";
Vortrag: 10th International Conference on Flexible Automation and Intelligent Manufacturing, University of Maryland at College Park,Maryland; 26.06.2000 - 28.06.2000; in: "Proceedings of the 10th International Conference on Flexible Automation and Intelligent Manufacturing", (2000), ISBN: 0-9701053-0-4; S. 215 - 223.

B. Katalinic, V. Visekruna, V. Kordic:
"Bionic Assembly System: Design and Scheduling of Next Generation of Self Organising Complex Flexible Assembly System in CIM Environment";
Vortrag: 35th CIRP International Seminar on Manufacturing Systems "Manufacturing Technology in the Information Age", Seoul, Korea; 13.05.2002 - 15.05.2002; in: "Proceeding of 35th CIRP International Seminar on Manufacturing Systems - Manufacturing Technology in the Information Age", K. Lee et al. (Hrg.); Seoul National University, (2002), S. 155 - 162.

V. Kordic, B. Katalinic:
"Agent Environment Interaction and Specialisation";
Vortrag: 3rd DAAAM International Workshop "Intelligent Manufacturing Systems", Kosice, Slovak Republic; 29.11.2001; in: "Proceeding of 3rd DAAAM International Workshop - Intelligent Manufacturing Systems", (2001), ISBN: 3-901509-31-3; S. 37 - 38.

V. Kordic, B. Katalinic, B. Ljoljic:
"Agent Based Manufacturing";
Vortrag: 4th Workshop "Human Factor and Environmentalist", Kosice, Slovaki; 05.11.2002; in: "Proceedings of the 4th Workshop 'Human Factor and Environmentalist'", B. Katalinic, E. Wessely (Hrg.); DAAAM International Vienna, Vienna (2002), ISBN: 3-901509-37-2; S. 53 - 54.

V. Kordic, B. Katalinic, B. Ljoljic:
"Toward Autonomous Agent Design Concept";
Vortrag: 3rd International Conference of DAAAM National Estonia "Industrial Engineering - New Challenges to SME, Tallin, Estonia; 25.04.2002 - 27.04.2002; in: "Proceedings of 3rd International Conference Industrial Engineering", (2002), ISBN: 9985-59-272-7; S. 100 - 103.

V. Kordic, B. Katalinic, K. Stuja:
"Requierements for Complete Agents";
Vortrag: 12th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Focus on Precision Engineering, Jena, Germany; 24.10.2001 - 27.10.2001; in: "Proceeding of 12th DAAAM International Symposium - Intelligent Manufacturing & Automation - Focus on Precision Engineering", B. Katalinic (Hrg.); DAAAM International Vienna, Vienna (2001), ISBN: 3-901509-19-4; S. 243 - 244.

P. Kostal, B. Katalinic, J. Bindas:
"Application of Ultrasound by Grinding";
Vortrag: 13th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Learning from Nature', Vienna; 23.10.2002 - 26.10.2002; in: "Annals of DAAAM for 2002 & Proceedings of the 13th International DAAAM Symposium", B. Katalinic (Hrg.); DAAAM International Vienna, Vienna (2002), ISBN: 3-901509-29-1; S. 281 - 282.

P. Kostal, B. Katalinic, M. Matusova:
"Analysing of Positioning and Clamping Cases";
Vortrag: 12th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Focus on Precision Engineering, Jena, Germany; 24.10.2001 - 27.10.2001; in: "Annals of DAAAM for 2001 & Proceedings of the 12the International DAAAM Symposium", B. Katalinic (Hrg.); DAAAM International Vienna, Vienna (2001), ISBN: 3-901509-19-4; S. 247 - 248.

A. Lazinica, B. Katalinic:
"Assembly Station Robot In Bionic Assembly System";
Vortrag: 13th International Conference "Industrial Systems", Herceg Novi, Serbia&Montenegro (eingeladen); 07.09.2005 - 09.09.2005; in: "Proceedings of 13th International Conference "Industrial Systems"", (2005), S. 273 - 278.

A. Lazinica, B. Katalinic:
"Behavior of Transport Mobile Robot in Bionic Assembly System";
Vortrag: IEEE International Conference on Mechatronics - ICM 2005, Taipei, Taiwan (eingeladen); 10.07.2005 - 12.07.2005; in: "Proceedings of IEEE International Conference on Mechatronics - ICM 2005", (2005), ISBN: 0-7803-8999-9; S. 220 - 225.

A. Lazinica, B. Katalinic:
"Design of Transport Mobile Robot Behavior in Self-Organising Assembly System";
Vortrag: 2005 IEEE/ASME International Conference on Advanced Intelligent Mechatronics - AIM 2005, Monterey, California, USA (eingeladen); 24.07.2005 - 28.07.2005; in: "Proceedings of 2005 IEEE/ASME International Conference on Advanced Intelligent Mechatronics - AIM 2005", (2005), ISBN: 0-7803-9046-6; S. 100 - 105.

A. Lazinica, B. Katalinic:
"Multi-robot system for assembly applications";
Vortrag: 36th Internaitonal Symposium on Robotics, Tokyo, Japan (eingeladen); 29.11.2005 - 01.12.2005; in: "Proceedings of 36th International Symposium on Robotics", (2005), ISBN: 4-9902717-0-x; S. 42 - 47.

A. Lazinica, B. Katalinic:
"Navigation of Transport Mobile Robot in Bionic Assembly System";
Vortrag: Proceedings of 4th Asian Conference on Industrial Automation and Robotics - ACIAR 2005, Bangkok, Thailand (eingeladen); 11.05.2005 - 13.05.2005; in: "Proceedings of 4th Asian Conference on Industrial Automation and Robotics - ACIAR 2005", (2005), ISBN: 974-8208-58-3; S. 27 - 31.

A. Lazinica, B. Katalinic:
"Reconfiguration of transport mobile robot queues in Bionic Assembly System";
Vortrag: Annals & Proceedings of 16th DAAAM Internaitonal Symposium, Opatija, Croatia (eingeladen); 19.10.2005 - 22.10.2005; in: "Annals & Proceedings of 16th DAAAM International Symposium", DAAAM International Vienna, (2005), ISBN: 3-901509-46-1; S. 221 - 222.

B. Ljoljic, B. Buchmeister, B. Katalinic:
"Strategic Planning as a Factor of Success in a Competitive Environment";
Vortrag: 14th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Focus on Reconstruction and Development', Sarajevo (eingeladen); 22.10.2003 - 25.10.2003; in: "DAAAM International Scientific Book 2003", B. Katalinic (Hrg.); DAAAM International Vienna, Vienna (2003), ISBN: 3-901-509-36-4; S. 359 - 366.

B. Ljoljic, B. Katalinic, V. Kordic:
"Choices and Phases in Strategic Management";
Vortrag: 3rd DAAAM International Workshop "Intelligent Manufacturing Systems", Kosice, Slovak Republic; 29.11.2001; in: "Proceeding of 3rd DAAAM International Workshop - Intelligent Manufacuring Systems", DAAAM International Vienna, Vienna (2001), ISBN: 3-901509-31-3; S. 45 - 46.

B. Ljoljic, B. Katalinic, V. Kordic:
"Strategical Planning as a Factor for Seccessful Business";
Vortrag: 12th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Focus on Precision Engineering, Jena, Germany; 24.10.2001 - 27.10.2001; in: "Proceeding of 12th DAAAM International Symposium - Intelligent Manufacturing & Automation: Focus on Precision Engineering", B. Katalinic (Hrg.); DAAAM International Vienna, Vienna (2001), ISBN: 3-901509-19-4; S. 273 - 274.

B. Ljoljic, B. Katalinic, K. Stuja, V. Kordic:
"Simulation of Flexible Assembly System for Electrical Motors";
Vortrag: 3rd International Conference of DAAAM National Estonia "Industrial Engineering - New Challenges to SME, Tallin, Estonia; 25.04.2002 - 27.04.2002; in: "Proceedings of 3rd International Conference: Industrial Engineering - New Challanges to SME", J. Papstel et al. (Hrg.); (2002), ISBN: 9985-59-272-7; S. 108 - 111.

B. Ljoljic, B. Katalinic, K. Stuja, V. Kordic, M. Stopper:
"Performance Evaluation of Flexible Assembly System for Electrical Motors";
Vortrag: 13th DAAAM International Symposium, Vienna, Austria; 23.10.2002 - 26.10.2002; in: "Proceeding of 13th DAAAM International Symposium", B. Katalinic (Hrg.); DAAAM International Vienna, Vienna (2002), ISBN: 3-901509-19-4; S. 317 - 318.

B. Ljoljic, B. Katalinic, K. Stuja, M. Stopper:
"Evaluation of Performance of Compley Flexible Assembly System";
Vortrag: 4th Workshop "Human Factor and Environmentalist", Kosice, Slovakia; 05.11.2002; in: "Proceedings of the 4th Workshop 'Human Factor and Environmentalist'", B. Katalinic, E. Wessely (Hrg.); DAAAM International Vienna, Vienna (2002), ISBN: 3-901509-37-2; S. 63 - 64.

V. Malisa, B. Katalinic:
"Next Generation of Production Systems: Original Concept of Selforganizing Production Systems";
Vortrag: Eight International Conference on Manufacturing & Management, Gold Coast, Queensland, Australia (eingeladen); 08.12.2004 - 10.12.2004; in: "Eight International Conference on Manufacturing Management Proceedings", (2004), ISBN: 0-9578296-1-2; S. 1 - 14.

K. Placko, B. Katalinic:
"Position or Speed Control of Hydraulic Actuators of Industrial Robots";
Vortrag: 2nd Yugoslav Symposium on Applied Robotics, Portoroz; 15.06.1981 - 17.06.1981; in: "Proc. 2nd Yugoslav Symposium on Applied Robotics", (1981), S. 309 - 311.

K. Stuja, B. Katalinic, S. Pllana, V. Kordic:
"FMSIM: An Integrated Environment for Scheduling of a Complex FMS";
Vortrag: 12 International DAAAM Symposium, Jena, Germany, 24-27 October 2001, Jena, Germany; 24.10.2001 - 27.10.2001; in: "Annals of DAAAM for 2001 & Proceedings of 12th DAAAM International Symposium", B. Katalinic (Hrg.); DAAAM International Vienna, (2001), ISBN: 3-901509-19-4; S. 465 - 466.

T. Udiljak, B. Katalinic:
"monitoring and Diagnostics of Machinig Systems and Machining Processes ";
Vortrag: 14th European Maintenance Conference "Euromaintenance '98", Dubrovnik; 05.10.1998 - 07.10.1998; in: "Proceedings of 14th European Maintenance Conference "Euromaintenance '98"", (1998), S. 451 - 461.

T. Udiljak, B. Katalinic:
"Monitorizacion y diagnostico de sistemas de mecanizado y procesos de mecanizado";
Vortrag: Gestion de activos industriales, Vol 3, Madrid; 1999; in: "Gestion de activos industriales, Vol 3", (1999), S. 69 - 76.

K. Velisek, B. Katalinic:
"Design Methodology of Scheduling Strategies and Scenarios of Complex Flexible Systems";
Vortrag: MTF Trnava of Slovak Technical University Bratislava, Trnava; 1997; in: "Scientific Works of MTF Trnava of Slovak Technical University Bratislava", (1997), S. 71 - 80.

K. Velisek, B. Katalinic, E Hruskova:
"The Base Conditions of Mulitspindle Head Design";
Vortrag: 14th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Focus on Reconstruction and Development', Sarajevo (eingeladen); 22.10.2003 - 25.10.2003; in: "Annals of DAAAM for 2003 & Proceedings of the 14th International DAAAM Symposium", B. Katalinic (Hrg.); DAAAM International Vienna, Vienna (2003), ISBN: 3-901-509-34-8; S. 481 - 482.

K. Velisek, B. Katalinic, P. Kostal:
"Structure of Information for technological Parameters";
Vortrag: DAAAM for 1998& Proceedings of 9th International DAAAM Symposium, Cluj-Napoca; 22.10.1998 - 24.10.1998; in: "Annals of DAAAM for 1998& Proceedings of 9th International DAAAM Symposium", (1998), S. 491 - 492.


Vorträge und Posterpräsentationen (ohne Tagungsband-Eintrag)


B. Katalinic:
"Advanced Technologies for Developing Countries: Globalisation, Chances and Risks";
Vortrag: 2nd DAAAM International Conference Advanced Technologies for Developing Countries, Tuzla (eingeladen); 26.06.2003 - 28.06.2003.

B. Katalinic:
"Advanced Topics in History and Trends of Technology";
Vortrag: CEEPUS Project A-104 Intelligent Manufacturing & Automation, Technical University, Cluj-Napoca, Romania (eingeladen); 27.02.2002.

B. Katalinic:
"Applied Robotics";
Vortrag: CEEPUS Project A-104 Intelligent Manufacturing & Automation, Technical University, Cluj-Napoca, Romania (eingeladen); 26.02.2002.

B. Katalinic:
"Bionic Assembly Systems";
Vortrag: CEEPUS Project A-104 Intelligent Manufacturing & Automation, MBA-EPF, Univ. of Maribor, Slovenia (eingeladen); 06.06.2002.

B. Katalinic:
"Globalisation: New Possibilities and Risk Factors";
Vortrag: 1st European-Pacific Congress on Globalisation, Vladivostok (eingeladen); 23.09.2003 - 26.09.2003.

B. Katalinic:
"Intelligent Automation in the Manufacturing";
Vortrag: CEEPUS Project A-104 Intelligent Manufacturing & Automation, Faculty of Mechanical Engineering, Brod, Croatia (eingeladen); 27.05.2002 - 31.05.2002.

B. Katalinic:
"Intelligent Manufacturing and Automation";
Vortrag: CEEPUS Project A-104 Intelligent Manufacturing & Automation, Faculty of Engineering, Rijeka, Croatia (eingeladen); 16.12.2002 - 20.12.2002.

B. Katalinic:
"Intelligent Manufacturing Systems";
Vortrag: CEEPUS Project A-104 Intelligent Manufacturing & Automation, Technical University, Cluj-Napoca, Romania (eingeladen); 27.02.2002.

B. Katalinic:
"Intelligent Manufacturing Systems";
Vortrag: CEEPUS Project A-104 Intelligent Manufacturing & Automation, MBA-EFP, Univ. of Maribor, Slovenia (eingeladen); 05.06.2002.

B. Katalinic:
"Intelligent Manufacturing Systems: Actuale State and Developing Trends";
Vortrag: CEEPUS Project A-104 Intelligent Manufacturing & Automation, MTF Trnava (Slovak Technical Universtiy), Slovakia (eingeladen); 10.12.2002.

B. Katalinic:
"Intelligent Manufacturing Systems: Learning from Nature";
Vortrag: CEEPUS Project A-104 Intelligent Manufacturing & Automation, Faculty of Engineering, Rijeka, Croatia (eingeladen); 22.04.2002 - 26.04.2002.

B. Katalinic:
"International Scientific and Academic Cooperation in the Framework of DAAAM International: Past - Present - Future, Plenary Section - Key Note Lecture";
Vortrag: 13th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Learning from Nature', Vienna, Austria (eingeladen); 23.10.2002 - 26.10.2002.

B. Katalinic:
"Mechatronik / Robotik: Aktuelle Stand und Entwicklungstendenzen";
Vortrag: Science Week, Wien (eingeladen); 16.05.2003.

B. Katalinic:
"Megatrends in the Development of Technology and their Influence on the Relation on Man-Technology-Nature";
Vortrag: Dies Academicus - Tallinn Technical University - Doctor honoris causa speech, Tallinn Estonia (eingeladen); 17.09.2003.

B. Katalinic:
"Modelling Simulation and Calcualtion of Industrial Robots";
Vortrag: CEEPUS Project A-104 Intelligent Manufacturing & Automation, Technical University, Cluj-Napoca, Romania (eingeladen); 26.02.2002.

B. Katalinic:
"Robotics in Education";
Vortrag: 2nd International Conference on Robotics in Education, Wien (eingeladen); 15.09.2011 - 16.09.2011.

B. Katalinic:
"Technical Product as Materialisation of Engineers Idea and Design Strategy of Nature - Plenary Session - Key Note Lecture";
Vortrag: 12 International DAAAM Symposium, Jena, Germany, 24-27 October 2001, Jena; 24.10.2002 - 27.10.2002.


Dissertationen (eigene und begutachtete)


S. Celar:
"Konzept eines intelligenten Moduls für die Optimierung der Abläufe innerhalb des FFS";
Betreuer/in(nen), Begutachter/in(nen): B. Katalinic, F. Breitenecker; Fertigungstechnik, 1997.

V. Kordic:
"Arbeitszenarien und Optimierung von Abläufen und Steuerung von selbstorganisierenden Bionic Assembly System in CIM Umgebung";
Betreuer/in(nen), Begutachter/in(nen): B. Katalinic, U. Egly; Institut für Fertigungstechnik, 2004.

B. Ljoljic:
"Kapazitätssteigerung und Durchlaufzeit Optimierung mittels Steuerungsart sowie struktureller Änderung eines komplexen flexiblen Montagesystems";
Betreuer/in(nen), Begutachter/in(nen): B. Katalinic, M. Gronalt; Fertigungstechnik, 2003.

K. Stuja:
"Die Optimierung von Fertigungsabläufen innerhalb eines Fertigungssystems für Drehteile bei beschränkter Anzahl der Fertigungsmittel";
Betreuer/in(nen), Begutachter/in(nen): B. Katalinic, F. Breitenecker; E311, 2002.

Z. Tekic:
"Platforme Znanja Koncept, USLOVI NASTANKA I MODELI";
Betreuer/in(nen), Begutachter/in(nen): S. Stankovski, D. Kukolj, D. Spath, B. Katalinic, I Cosic; Faculty of Technical Sciences, Univ.of Novi Sad, 2012; Rigorosum: 28.09.2012.