TU Home
Diese Publikationsliste wurde automatisch aus den Publikationsdaten der TU Wien erstellt. Wenn Sie komplexere Suchabfragen vornehmen wollen, rufen Sie bitte die Seite "Publikationen der Fakultät" direkt auf, oder verwenden Sie die globale Suchfunktion der Publikationsdatenbank der Technischen Universität Wien!


Publikationsdatenbank Home  

Publikationsliste für
Andreas Bartl
als Autorin / Autor bzw. wesentlich beteiligte Person

232 Datensätze (1996 - 2021)

Die Publikationen der TU Wien sind erst ab dem Jahr 2002 vollzählig in der Publikationsdatenbank enthalten. Publikationen aus den Jahren vor 2002 können, müssen aber nicht in der Datenbank vorhanden sein.


Zeitschriftenartikel


A. Bartl:
"Barriers towards achieving a zero waste society";
Waste Management, 31 (2011), 12; S. 2369 - 2370.

A. Bartl:
"Fibers from transport for transport";
MobileTex, 5 (2010), 11; S. 11.

A. Bartl:
"Fibers from Transport for Transport";
The International Textile Magazine, 80 (2011), S. 44 - 46.

A. Bartl:
"Fibres en Provenance du Transport Destinées au Transport";
The International Textile Magazine (Franz. Ausgabe), 80 (2011), S. 40 - 41.

A. Bartl:
"From Fluff to Stuff : An Economic Solution?";
Waste Management World, 12 (2011), S. 14 - 18.

A. Bartl:
"Ist die Europäische Abfallwirtschaft auf dem Weg zur Kreislaufwirtschaft?";
Österreichische Ingenieur- und Architekten-Zeitschrift (ÖIAZ), 161 (2016), 1-12; S. 37 - 48.

A. Bartl:
"Moving from recycling to waste prevention: A review of barriers and enables";
Waste Management & Research, 32 (2014), 9, Suppl.; S. 3 - 18.

A. Bartl:
"Recuperacion de fibras procedentes de prendas de vestir";
Revista de la Industria Textil, 464 (2009), 1; S. 50 - 55.

A. Bartl:
"Recycling und Wiederverwendung von Fasern aus Abfällen";
Österreichische Wasser- und Abfallwirtschaft, 61 (2009), 5-6; S. 71 - 76.

A. Bartl:
"Recycling von speziellen Abfallfasern";
Technische Textilien, 55 (2012), 1; S. 18 - 19.

A. Bartl:
"Textile Waste: Dealing with the Problem";
D-Waste Ultimate Report, (2013), S. 1 - 49.

A. Bartl:
"The Circular Economy Package of the European Union: Are new Paths being taken or is it an old Story?";
Detritus, 12 (2020), S. 12 - 17.

A. Bartl:
"Trash Talking : Recycling 2035 - Evolution not Revolution";
Waste Management World, 14 (2013), S. 23.

A. Bartl:
"Ways and entanglements of the waste hierarchy";
Waste Management, 34 (2014), S. 1 - 2.

A. Bartl:
"Weg mit den Fasern";
Recycling Technology, 1 (2009), 4; S. 34 - 35.

A. Bartl, S. Bohr, R. Haubner, B. Lux:
"A Comparison of Low-Pressure CVD Synthesis of Diamond and c-BN";
International Journal of Refractory Metals & Hard Materials, 14 (1996), S. 145 - 157.

A. Bartl, An. Hackl, B. Mihalyi, M. Wistuba, I. Marini:
"Recyling of Fibre Materials";
Trans IChemE, Part B, 83 (2005), S. 351 - 358.

A. Bartl, A. Haner:
"Fiber Recovery from End-of-Life Apparel";
Chemical Engineering Transactions, 18 (2009), S. 875 - 880.

A. Bartl, W. Ipsmiller:
"Textilrecycling mittels Enzymen - Das Recycling von Mischgeweben durch enzymatische Hydrolyse";
GIT Labor-Fachzeitschrift, 64 (2020), 6; S. 19 - 21.

A. Bartl, B. Mihalyi, I. Marini:
"Applications of Renewable Fibrous Materials";
Chemical and Biochemical Engineering Quarterly, 18 (2004), 1; S. 21 - 28.

A. Bartl, D. Pico:
"Characterization of Short Fibers";
Chemical Engineering Transactions, 17 (2009), S. 741 - 746.

A. Bartl, D. Pico:
"Revolutionary high-performance fiber based on basaltic rock";
Chemical Fibers International, 58 (2008), S. 240 - 241.

A. Bartl, D. Pico:
"Revolutionary high-performance fiber based on basaltic rock";
Melliand China, 37 (2009), 5; S. 7 - 10.

A. Bartl, D. Pico:
"Revolutionary high-performance fiber based on basaltic rock";
Man-Made Fiber Year Book 2009, 59 (2009), S. 43 - 44.

A. Bartl, A. Tkaczyk, A. Amato, F. Beolchini, V. Lapkovskis, M. Petranikova:
"Supply and Substitution Options for Selected Critical Raw Materials: Cobalt, Niobium, Tungsten, Yttrium and Rare Earths Elements";
Detritus, 3 (2018), S. 37 - 42.

An. Hackl, B. Mihalyi, A. Bartl, I. Marini:
"Grasfasern als Porosierungsmittel in der Ziegelindustrie";
Ziegelindustrie International, 12 (2004), S. 59 - 64.

W. Ipsmiller, A. Bartl:
"An Optical Method for the Analysis of Gel Particles in Viscose";
Chemical Engineering Transactions, 57 (2017), S. 841 - 846.

W. Ipsmiller, B. Piribauer, S. Vecchiato, A. Bartl, G. Gübitz, G. Ruppert:
"Circular economy solution for flame-retardant protective clothing";
Technische Textilien, 62 (2019), 3; S. 185 - 188.

W. Ipsmiller, B. Piribauer, S. Vecchiato, A. Bartl, G. Gübitz, G. Ruppert:
"Circular-Economy-Lösung für flammhemmende Schutzbekleidung";
Technische Textilien, 62 (2019), 4; S. 268 - 271.

M. Petranikova, A. Tkaczyk, A. Bartl, A. Amato, V. Lapkovskis, C. Tunsu:
"Vanadium sustainability in the context of innovative recycling and sourcing development";
Waste Management, 113 (2020), S. 521 - 544.

B. Piribauer, A. Bartl:
"Textile recycling processes, state of the art and current developments: A mini review";
Waste Management & Research, 37 (2019), 2; S. 112 - 119.

B. Piribauer, A. Bartl, W. Ipsmiller:
"Enzymatic textile recycling - best practices and outlook";
Waste Management & Research, 39 (2021), 10; S. 1277 - 1290.

B. Piribauer, U. Jenull-Halver, F. Quartinello, W. Ipsmiller, T. Laminger, D. Koch, A. Bartl:
"TEX2MAT - Next Level Textile Recycling with Biocatalysts";
Detritus, 13 (2020), S. 78 - 86.

B. Piribauer, T. Laminger, W. Ipsmiller, D. Koch, A. Bartl:
"Assessment of microplastics in the environment - fibres: the disregarded twin?";
Detritus, 9 (2020), S. 201 - 212.

A. Tkaczyk, A. Bartl, A. Amato, V. Lapkovskis, M. Petranikova:
"Sustainability evaluation of essential critical raw materials: cobalt, niobium, tungsten and rare earth elements";
Journal of Physics D: Applied Physics, 50 (2018), 20; 26 S.

B. Zeiler, A. Bartl, W.D. Schubert:
"Recycling of tungsten: Current share, economic limitations, technologies and future potential";
International Journal of Refractory Metals & Hard Materials, 98 (2021).

B. Zeiler, W.D. Schubert, A. Bartl:
"Recycling of Tungsten - Current share, economic limitations and future potential";
Tungsten Newsletter, May (2018), S. 1 - 18.

Zusätzliche Informationen


Editorials in wiss. Zeitschriften


A. Bartl:
"The EU Circular Economy Package: A genius programme or an old hat?";
Waste Management & Research, 36 (2018), 4; S. 309 - 310.

A. Bartl:
"Withdrawal of the circular economy package: A wasted opportunity or a new challenge?";
Waste Management, 44 (2015), S. 1 - 2.


Buchbeiträge


A. Bartl:
"An innovative concept for fiber recovery from shredder";
in: "Sardinia Symposium 30th Anniversary Book", R. Cossu, R. Stegmann (Hrg.); CISA Publisher, Padua, Italien, 2017, ISBN: 9788862650113, S. 253 - 262.

A. Bartl:
"Bedeutung von Recycling für Anwendungsgebiete technischer Textilien";
in: "Technical Textiles 2018/2019 - Innovations, Trends, Markets", Deutscher Fachverlag GmbH, Frankfurt am Main, 2018, ISBN: 978-3-86641-883-7, S. 72 - 77.

A. Bartl:
"End-of- Life Textiles";
in: "Waste - A Handbook for Management", Elsevier Inc., 2019, ISBN: 978-0-12-815060-3, S. 323 - 336.

A. Bartl:
"Textile Waste";
in: "Waste: A Handbook for Management", Elsevier Inc., 2011, ISBN: 978-0-12-381475-3, S. 167 - 179.

A. Bartl:
"Textile Waste";
in: "CEC4Europe Factbook", Circular Economy Coalition for Europe, 2018, 11 S.

A. Bartl:
"Textiles production and end-oflife management options";
in: "Plastic Waste and Recycling - Environmental Impact, Societal Issues, Prevention, and Solutions", T. Letcher (Hrg.); Academic Press, Elsevier, London. UK, 2020, ISBN: 978-0-12-817880-5, S. 251 - 279.

A. Bartl:
"The importance of recycling for the areas of application of technical textiles";
in: "Technical Textiles 2018/2019 - Innovations, Trends, Markets", Deutscher Fachverlag GmbH, Frankfurt am Main, 2018, ISBN: 978-3-86641-884-4, S. 72 - 77.

A. Bartl, An. Hackl, B. Mihalyi, M. Wistuba, I. Marini:
"Recycling Of Fiber Materials";
in: "Process Safety and Environmental Protection", Institution of Chemical Engineers, 2005, S. 351 - 358.

A. Bartl, B. Mihalyi, L. Madtha, I. Marini:
"Recycled Fibers as Viscosity Modifiers";
in: "Chemical Industry and Environment V Volume II", Ferdinand Berger & Söhne GmbH, 2006, ISBN: 3900554579, S. 1104 - 1111.


Beiträge in Tagungsbänden


A. Bartl:
"An innovative concept for fiber recovery from shredder light fraction";
in: "XII International Waste Management and Landfill Symposium - Proceedings - Executive Summaries", herausgegeben von: iwwg - International waste working group; CISA Publisher, Padua, Italien, 2009, (eingeladen), ISBN: 978-88-6265-007-6, S. 773 - 774.

A. Bartl, An. Hackl, B. Mihalyi, M. Wistuba, I. Marini:
"Recycling of Fiber Materials";
in: "Proceedings of the 7th World Congress of Chemical Engineering", European Federation of Chemical Engineering, 2005, 10 S.

A. Haner, A. Bartl:
"How to Turn Textile Waste into Valuable Fibers";
in: "ISWA World Congress 2009 -Book of Abstracts", herausgegeben von: ISWA (International Solid Waste Association); ISWA, Lissabon, Portugal, 2009, ISBN: 978-989-96421-1-9, S. 112 - 113.

D. Pico, A. Bartl:
"Characteristics of Composite Materials in thermal Waste Treatment";
in: "XII International Waste Management and Landfill Symposium - Proceedings - Executive Summaries", herausgegeben von: iwwg - International waste working group; CISA Publisher, Padua, Italien, 2009, (eingeladen), ISBN: 978-88-6265-007-6, S. 343 - 344.


Vorträge und Posterpräsentationen (mit Tagungsband-Eintrag)


A. Bartl:
"An Economic Solution for Recycling Fluff from Shredder Light Fraction";
Vortrag: ISWA World Congress 2010, Hamburg, Deutschland; 15.11.2010 - 18.11.2010; in: "Papers and Proceedings", (2010), 10 S.

A. Bartl:
"An innovative concept for fiber recovery from shredder light fraction";
Vortrag: XII International Waste Management and Landfill Symposium, Cagliari, Italien; 05.10.2009 - 09.10.2009; in: "XII International Waste Management and Landfill Symposium - Proceedings", (2009), ISBN: 978-88-6265-007-6; 10 S.

A. Bartl:
"Apparel Recycling: State-of-the-Art and Future Potentials";
Vortrag: Waste In Social Environment, Linz; 10.05.2009 - 15.05.2009; in: "WISE TC 5 - Biogas, Energy supply (CDR)", (2009), 1 S.

A. Bartl:
"Are Recycling Rates Appropriate Means to Move Towards a Circular Economy?";
Vortrag: sardinia_2017 - 16th International Waste Management and Landfill Symposium, S. Margherita di Pula, Italien; 02.10.2017 - 06.10.2017; in: "Full Symposium Proceedings", (2017), ISBN: 978-88-6265-010-6; 10 S.

A. Bartl:
"Barriers and Limits for Recycling and Moving Towards "Zero Waste"";
Vortrag: The ISWA World Solid Waste Congress 2012, Florenz, Italien; 17.09.2012 - 19.09.2012; in: "The ISWA World Solid Waste Congress 2012", (2012), 10 S.

A. Bartl:
"Barriers and Limits to Reach "Zero Waste" (Obstaculos y Limites para Llegar a Basura Cero)";
Vortrag: XII Congreso Internacional Disposicion Final de Residuos y Perspectivas Ambientales, Armenia, Kolumbien (eingeladen); 26.09.2012 - 28.09.2012; in: "XII Congreso Internacional Disposicion Final de Residuos y Perspectivas Ambientales", (2012), 30 S.

A. Bartl:
"Challenges for the recycling and recovery of end-of-use textiles";
Vortrag: International Symposium "Science to support Circular Economy", Wien; 19.09.2018; in: "Science to support Circular Economy", (2018), S. 17 - 20.

A. Bartl:
"Circular economy- a concept to tackle the issue of critical raw materials";
Vortrag: 11th NanoTrust Conference, Wien; 30.10.2018; in: "Abstracts", (2018), S. 8.

A. Bartl:
"Das EU-Kreislaufwirtschaftspaket - Ein Geniestreich oder ein alter Hut?";
Vortrag: Recy & DepoTech 2018, Leoben, Montanuniversität; 07.11.2018 - 09.11.2018; in: "Recy & DepoTech 2018", (2018), ISBN: 978-3-200-05874-3; S. 309 - 314.

A. Bartl:
"Das neue Kreislaufwirtschaft-Paket: Geniestreich oder heiße Luft?";
Vortrag: 13. Recy & DepoTech 2016, Leoben; 08.11.2016 - 11.11.2016; in: "Tagungsband zur 13. Recy & DepoTech-Konferenz", (2016), ISBN: 978-3-200-04777-8; S. 287 - 292.

A. Bartl:
"Does "Zero Waste" Mean No Waste?";
Vortrag: ISWA World Congress 2013, Wien; 07.10.2013 - 11.10.2013; in: "Proceedings", (2013), 10 S.

A. Bartl:
"End-of-life textiles: A challenging type of waste with a large potential";
Vortrag: ISWA World Congress 2016, Novi Sad, Serbien; 19.09.2016 - 21.09.2016; in: "Proceedings", (2016), ISBN: 978-86-7892-837-6; 15 S.

A. Bartl:
"Facts and Myths of Niobium Recycling";
Vortrag: TIME 2018 Technological Innovation in Metals Engineering, Haifa, Israel; 30.05.2018 - 31.05.2018; in: "Abstracts", (2018), S. 36 - 37.

A. Bartl:
"Fallbeispiele zum Recycling von speziellen Abfallfasern";
Vortrag: 10. STFI-Kolloquium "recycling for textiles", Chemnitz, Deutschland; 30.11.2011 - 01.12.2011; in: "recycling for textiles", (2011), S. 15 - 17.

A. Bartl:
"Fiber Recycling : Potential for Saving Energy and Resources";
Vortrag: ISWA World Congress 2009, Lissabon, Portugal; 12.10.2009 - 15.10.2009; in: "ISWA World Congress 2009 - Proceedings", (2009), 9 S.

A. Bartl:
"Fibers derived from shredder light fraction";
Vortrag: 6th European Meeting on Chemical Industry and Environment (EMChIE 2010), Mechelen, Belgien; 17.05.2010 - 19.05.2010; in: "EMChIE 2010 Conference Proceedings (Vol.1)", (2010), ISBN: 9789081548601; S. 279 - 287.

A. Bartl:
"Fibers from Transport for Transport";
Vortrag: 49th Dornbirn Man-Made Fibers Congress, Dornbirn; 15.09.2010 - 17.09.2010; in: "49th Dornbirn Man-Made Fibers Congress - Lectures", (2010), 22 S.

A. Bartl:
"Muss die Abfallhierarchie entsorgt werden?";
Vortrag: DepoTech 2014, Leoben; 04.11.2014 - 07.11.2014; in: "Abfallwirtschaft, Abfallverwertung und Recycling, Deponietechnik und Altlasten", (2014), ISBN: 978-3-200-03797-7; S. 217 - 222.

A. Bartl:
"Planned Obsolescence and its Impact on the Waste Management Sector";
Vortrag: ISWA Beacon Conference - Waste Prevention & Recycling, Wien; 31.05.2012 - 01.06.2012; in: "ISWA Beacon Conference - Waste Prevention & Recycling", (2012), ISBN: 978-3-902810-45-8.

A. Bartl:
"Reuse of Fibers Derived from Shredder Light Fraction";
Vortrag: 9th International Automobile Recycling Congress, München, Deutschland; 11.03.2009 - 13.03.2009; in: "9th International Automobile Recycling Congress", (2009), 27 S.

A. Bartl:
"Textile Waste : Current Developments towards Resource Management";
Vortrag: ISWA 2011 - World Congress of International Solid Waste Association, Daegu, Korea; 17.10.2011 - 20.10.2011; in: "ISWA 2011 Proceeding", (2011), 10 S.

A. Bartl:
"The EU circular economy package: are new paths being taken or is it an old story?";
Vortrag: sardinia_2019 - 17th International Waste Management and Landfill Symposium, Santa Margherita di Pula, Italien; 30.09.2019 - 04.10.2019; in: "Proceedings", (2019), ISBN: 978-8-862650-14-4; Paper-Nr. 043, 7 S.

A. Bartl:
"Ways and entanglements of the waste hierarchy";
Vortrag: 14th International Waste Management and Landfill Symposium, S. Margherita di Pula, Italien; 30.09.2013 - 04.10.2013; in: "Symposium Proceedings", (2013), ISBN: 9788862650281; 15 S.

A. Bartl:
"Withdrawal of the circular economy package: a wasted opportunity or a new challenge?";
Vortrag: 15th International Waste Management and Landfill Symposium, S. Margherita di Pula, Cagliari, Italien; 05.10.2015 - 09.10.2015; in: "Symposium Proceedings", (2015), ISBN: 9788862650212; Paper-Nr. 124, 12 S.

A. Bartl:
"Zero waste : a desirable goal or empty words?";
Vortrag: XIII International Waste Management and Landfill Symposium, S.Margherita di Pula (Cagliari), Sardinien, Italien; 03.10.2011 - 07.10.2011; in: "Sardinia 2011 Proceedings", (2011), ISBN: 978-88-6265-000-7; 8 S.

A. Bartl, B. Appelqvist:
"Evaluating the recycling efficiency and quality";
Vortrag: 15th International Waste Management and Landfill Symposium, S. Margherita di Pula, Cagliari, Italien; 05.10.2015 - 09.10.2015; in: "Symposium Proceedings", (2015), ISBN: 9788862650212; Paper-Nr. 516, 8 S.

A. Bartl, J. Cooper:
"Definition of Recycling: A review and a view to the future";
Vortrag: ISWA World Congress 2013, Wien; 07.10.2013 - 11.10.2013; in: "Proceedings", (2013), 11 S.

A. Bartl, An. Hackl, B. Mihalyi, I. Marini:
"Der Einsatz Nachwachsender Faserrohstoffe als Porosierungsadditive in der Ziegelindustrie .";
Vortrag: 4.Internationales Symposium, Erfurt , Deutschland; 11.09.2003 - 12.09.2003; in: "Werkstoffe aus Nachwachsenden Rohstoffen", CD -ROM (2003).

A. Bartl, An. Hackl, B. Mihalyi, I. Marini:
"Wirtschaftliches Recycling von Altreifen";
Vortrag: DEPO TECH 2004, Leoben; 24.11.2004 - 26.11.2004; in: "Konferenzbericht Abfall- und Deponietechnik,Altlasten, Abfallwirtschaft", (2004), ISBN: 3-7739-5993-1; S. 531 - 538.

A. Bartl, An. Hackl, B. Mihalyi, I. Marini, F. Neubacher:
"Zukunftsweisende Altreifenentsorgung";
Vortrag: Abfallforschungstage 2004, Hannover , Deutschland; 14.06.2004 - 16.06.2004; in: "Auf dem Weg in eine nachhaltige Abfallwirtschaft", Cuvillier Verlag, (2004), ISBN: 3-86537-121-3; S. 337 - 355.

A. Bartl, An. Hackl, B. Mihalyi, I. Marini, M. Wistuba:
"Recycling of Fiber Materials";
Vortrag: 7th World Congress of Chemical Engineering, Glasgow, Schottland; 10.07.2005 - 14.07.2005; in: "Book of Abstracts", (2005), 1 S.

A. Bartl, A. Haner:
"Fiber recovery from end-of-life apparel";
Poster: 12th Conference Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, Rom, Italien; 10.05.2009 - 13.05.2009; in: "Pres 09 (cdr)", (2009), 6 S.

A. Bartl, E. Hauser, M. Wistuba:
"End-of-life vehicle recycling: new possibilities for the fiber fraction in asphalt pavements";
Vortrag: 15th International Waste Management and Landfill Symposium, S. Margherita di Pula, Cagliari, Italien; 05.10.2015 - 09.10.2015; in: "Symposium Proceedings", (2015), ISBN: 9788862650212; Paper-Nr. 125, 12 S.

A. Bartl, B. Hofbauer, W. Grimm:
"Nonwovens from Tire Fluff as Premium Oil Adsorbent";
Vortrag: ISWA 2011 - World Congress of International Solid Waste Association, Daegu, Korea; 17.10.2011 - 20.10.2011; in: "ISWA 2011 Proceeding", (2011), 9 S.

A. Bartl, W. Ipsmiller:
"Textile Waste: where is the journey heading?";
Vortrag: Sardinia 2021, 18th International Symposium on Waste Management and Sustainable Landfilling (Hybrid Conference), Santa Margherita di Pula, Sardinien, Italien; 11.10.2021 - 15.10.2021; in: "Proceedings Sardinia 2021", (2021), ISBN: 978-8-8626-5026-7; Paper-Nr. 1448, 6 S.

A. Bartl, W. Ipsmiller:
"The new Waste Framework Directive and its impact on textile waste";
Vortrag: 15. Recy & DepoTech-Konferenz (Online Konferenz), Leoben; 18.11.2020 - 20.11.2020; in: "Recy & DepoTech 2020", (2020), ISBN: 978-3-200-07190-2; S. 539 - 544.

A. Bartl, W. Ipsmiller, B. Piribauer, D. Koch, T. Laminger:
"Microplastics in maritime systems, overview and methods for analysis";
Vortrag: sardinia_2019 - 17th International Waste Management and Landfill Symposium, Santa Margherita di Pula, Italien; 30.09.2019 - 04.10.2019; in: "Proceedings", (2019), ISBN: 978-8-862650-14-4; Paper-Nr. 393, 9 S.

A. Bartl, I. Marini:
"Altkleiderrecycling";
Vortrag: Abfallforschungstage 2008, Hannover; 04.06.2008 - 05.06.2008; in: "Abfallforschungstage 2008", M. Kühle-Weidermeier (Hrg.); Cuvillier Verlag, (2008), S. 14 - 24.

A. Bartl, I. Marini:
"Faserrecycling";
Vortrag: 47.Chemiefasertagung, Dornbirn; 17.09.2008 - 19.09.2008; in: "Comunicating the Textile Future", (2008).

A. Bartl, I. Marini:
"Möglichkeiten zur Aufbereitung und Wiederverwendung von Altfasern";
Vortrag: Depo Tech 2008, Leoben; 12.11.2008 - 14.11.2008; in: "Depo Tech 2008", K. Lorber, G. Kreindl, P. Müller, D. Sager, K. Wruss (Hrg.); VGE Verlag, (2008), ISBN: 978-3-86797-028-0; S. 195 - 200.

A. Bartl, I. Marini:
"Recycling of Apparel";
Vortrag: Chemical Engineering Transactions, Rom; 11.05.2008 - 14.05.2008; in: "Chemical Engineering Transactions", The Italian Association of Chemical Engineering, 13 (2008), ISBN: 978-88-95608-07-5; S. 327 - 333.

A. Bartl, B. Mihalyi, L. Madtha, I. Marini:
"Novel approach to fibre recycling";
Vortrag: EDANA`s Nonwovens Research Academy, Roubaix (Lille), France; 20.04.2006 - 21.04.2006; in: "Proc.of EDANA`s Nonwovens Research Academy", (2006), 1 S.

A. Bartl, D. Pico:
"Characterization of short fibers";
Vortrag: The Ninth International Conference on Chemical and Process Engineering, Rom, Italien; 10.05.2009 - 13.05.2009; in: "ICheaP-9 (CDR)", (2009), 6 S.

A. Bartl, D. Pico:
"From GFRP to GFRP recycleability of fiber reinforced plastics";
Vortrag: XIII International Waste Management and Landfill Symposium, S.Margherita di Pula (Cagliari), Sardinien, Italien; 03.10.2011 - 07.10.2011; in: "Sardinia 2011 Proceedings", (2011), ISBN: 978-88-6265-000-7; 8 S.

A. Bartl, D. Pico, P. Hartmann:
"Basalt Fibers - Eco-Friendly Alternative to Glass Fibers";
Vortrag: 48th Dornbirn Man-Made Fibers Congress, Dornbirn; 16.09.2009 - 18.09.2009; in: "48th Dornbirn Man-Made Fibers Congress", (2009), 18 S.

A. Bartl, D. Pico, I. Marini:
"Textile Basaltmultifilamente als Werkstoff der Zukunft";
Vortrag: 47.Chemiefasertagung, Dornbirn; 17.09.2008 - 19.09.2008; in: "Comunicating the Textile Future", (2008).

A. Bartl, D. Pico, B. Mihalyi, An. Hackl, I. Marini:
"Inovative Concepts for Recycling Fiber Containing Waste";
Poster: ISWA Annual Congress 2006, Copenhagen, Denmark; 01.10.2006 - 05.10.2006; in: "Waste Site Stories", (2006), 10 S.

A. Bartl, A. Tkaczyk, A. Amato, F. Beolchini, V. Lapkovskis, M. Petranikova:
"Critical raw materials under extreme conditions: a review of niobium";
Vortrag: E-MRS - 2017 Fall Meeting, Warschau, Polen (eingeladen); 18.09.2017 - 21.09.2017; in: "Abstracts", (2017), Paper-Nr. I.2.1, 1 S.

A. Bartl, A. Tkaczyk, A. Amato, F. Beolchini, V. Lapkovskis, M. Petranikova:
"Solutions for Critical Raw Materials under Extreme Conditions: State-of-the-Art of Cobalt, Niobium Tungsten, Yttrium and Rare Earth Elements";
Vortrag: sardinia_2017 - 16th International Waste Management and Landfill Symposium, S. Margherita di Pula, Italien; 02.10.2017 - 06.10.2017; in: "Full Symposium Proceedings", (2017), ISBN: 978-88-6265-010-6; 9 S.

A. Bartl, A. Tkaczyk, A. Amato, V. Lapkovskis, M. Petranikova:
"Criticality Review On Cobalt, Niobium, Tungsten And Rare Earth Elements";
Vortrag: ISWA World Congress 2018, Kuala Lumpur, Malaysia; 22.10.2018 - 24.10.2018; in: "Book of Proceedings", (2018), 7 S.

E. Boschmeier, A. Bartl, W. Ipsmiller:
"Introduction to system circularity and innovative recycling of textiles (SCIRT)";
Vortrag: Sardinia 2021, 18th International Symposium on Waste Management and Sustainable Landfilling (Hybrid Conference), Santa Margherita di Pula, Sardinien, Italien; 11.10.2021 - 15.10.2021; in: "Proceedings Sardinia 2021", (2021), ISBN: 978-8-8626-5026-7; Paper-Nr. 1698, 2 S.

A. Haner, A. Bartl:
"Closing the Loop in Apparel Recycling";
Poster: 5.Minisymposium Verfahrenstechnik, Wien; 24.06.2009 - 25.06.2009; in: "5.Minisymposium Verfahrenstechnik - Tagungsband", (2009), ISBN: 978-3-9502731-0-6; S. 145 - 149.

A. Haner, A. Bartl:
"How to Turn Textile Waste into Valuable Fibers";
Vortrag: ISWA World Congress 2009, Lissabon, Portugal (eingeladen); 12.10.2009 - 15.10.2009; in: "ISWA World Congress 2009 - Proceedings", (2009), 7 S.

A. Haner, A. Bartl:
"Properties of waste derived fibers";
Vortrag: 6th European Meeting on Chemical Industry and Environment (EMChIE 2010), Mechelen, Belgien; 17.05.2010 - 19.05.2010; in: "EMChIE 2010 Conference Proceedings (Vol.1)", (2010), ISBN: 9789081548601; S. 425 - 431.

A. Haner, A. Bartl:
"Recovery of Apparel Waste";
Vortrag: ISWA World Congress 2010, Hamburg, Deutschland; 15.11.2010 - 18.11.2010; in: "Papers and Proceedings", (2010), 10 S.

A. Haner, A. Bartl:
"Saving Energy and Resources by Apparel Recycling";
Poster: Junior Scientist Conference 2010, Vienna; 07.04.2010 - 09.04.2010; in: "Proceedings", (2010), ISBN: 978-3-200-01797-9; S. 421 - 422.

A. Haner, A. Bartl:
"Waste Minimization through Recycling of Apparel";
Vortrag: XII International Waste Management and Landfill Symposium, Cagliari, Italien; 05.10.2009 - 09.10.2009; in: "XII International Waste Management and Landfill Symposium - Proceedings", (2009), ISBN: 978-88-6265-007-6; 9 S.

W. Ipsmiller, A. Bartl:
"State-of-the-art and future perspectives in textile recycling";
Vortrag: 15. Recy & DepoTech-Konferenz (Online Konferenz), Leoben; 18.11.2020 - 20.11.2020; in: "Recy & DepoTech 2020", (2020), ISBN: 978-3-200-07190-2; S. 545 - 548.

W. Ipsmiller, A. Bartl:
"State-of-the-Art and Future Perspectives of End-of-Life Textiles Management";
Vortrag: sardinia_2017 - 16th International Waste Management and Landfill Symposium, S. Margherita di Pula, Italien; 02.10.2017 - 06.10.2017; in: "Full Symposium Proceedings", (2017), ISBN: 978-88-6265-010-6; 16 S.

W. Ipsmiller, A. Bartl:
"Textile Waste: an inventory of available and emerging recycling technologies";
Vortrag: Sardinia 2021, 18th International Symposium on Waste Management and Sustainable Landfilling (Hybrid Conference), Santa Margherita di Pula, Sardinien, Italien; 11.10.2021 - 15.10.2021; in: "Proceedings Sardinia 2021", (2021), ISBN: 978-8-8626-5026-7; Paper-Nr. 1582, 9 S.

W. Ipsmiller, E. Ipsmiller, A. Bartl:
"Dead white men's clothes: a comprehensive synopsis of end-of-life textiles management and global economic implications";
Vortrag: sardinia_2019 - 17th International Waste Management and Landfill Symposium, Santa Margherita di Pula, Italien; 30.09.2019 - 04.10.2019; in: "Proceedings", (2019), ISBN: 978-8-862650-14-4; Paper-Nr. 376, 14 S.

W. Ipsmiller, E. Ipsmiller, A. Bartl:
"Dead white men's clothes: is apparel re-use the best solution?";
Vortrag: Sardinia 2021, 18th International Symposium on Waste Management and Sustainable Landfilling (Hybrid Conference), Santa Margherita di Pula, Sardinien, Italien; 11.10.2021 - 15.10.2021; in: "Proceedings Sardinia 2021", (2021), ISBN: 978-8-8626-5026-7; Paper-Nr. 1701, 3 S.

W. Ipsmiller, T. Laminger, A. Bartl:
"Optische Partikelanalyse in Polymerfolien";
Vortrag: 13. Minisymposium Verfahrenstechnik (13th Minisymposium Chemical and Process Engineering), Innsbruck; 29.03.2017 - 30.03.2017; in: "Book of Abstracts", (2017).

W. Ipsmiller, B. Piribauer, G. Ruppert, A. Bartl, G. Gübitz:
"Contributing to a circular economy by an advanced method for the complete recycling of special technical textiles";
Vortrag: sardinia_2019 - 17th International Waste Management and Landfill Symposium, Santa Margherita di Pula, Italien; 30.09.2019 - 04.10.2019; in: "Proceedings", (2019), ISBN: 978-8-862650-14-4; Paper-Nr. 377, 12 S.

W. Ipsmiller, B. Piribauer, S. Vecchiato, A. Bartl, G. Gübitz, G. Ruppert:
"A recovery concept for constituents of protective garments introducing enzymatic hydrolisis";
Vortrag: ISWA World Congress 2019, Bilbao, Spanien; 07.10.2019 - 09.10.2019; in: "Proceedings", (2019), 2 S.

P. Kählig, W. Ipsmiller, A. Bartl:
"Investigating possibilities for the recycling of PET/ cellulose mixed textile waste";
Vortrag: Sardinia 2021, 18th International Symposium on Waste Management and Sustainable Landfilling (Hybrid Conference), Santa Margherita di Pula, Sardinien, Italien; 11.10.2021 - 15.10.2021; in: "Proceedings Sardinia 2021", (2021), ISBN: 978-8-8626-5026-7; Paper-Nr. 1462, 9 S.

P. Kählig, W. Ipsmiller, A. Bartl:
"To improve automatic sorting and recycling of waste textiles - An introduction to the Case Study B1 of the Christian Doppler Laboratory (CD-Lab) for design and assessment of an efficient, recycling-based Circular Economy";
Vortrag: Sardinia 2021, 18th International Symposium on Waste Management and Sustainable Landfilling (Hybrid Conference), Santa Margherita di Pula, Sardinien, Italien; 11.10.2021 - 15.10.2021; in: "Proceedings Sardinia 2021", (2021), ISBN: 978-8-8626-5026-7; Paper-Nr. 1697, 2 S.

D. Koch, A. Bartl, B. Mihalyi:
"Food waste for biogas production - Reflecting the holistic nature of Life Cycle Assessment";
Vortrag: ISWA World Congress 2019, Bilbao, Spanien; 07.10.2019 - 09.10.2019; in: "Proceedings", (2019), 2 S.

V. Lapkovskis, A. Bartl:
"Recyclability of cobalt-bearing scrap: trends and perspectives";
Poster: E-MRS - 2017 Fall Meeting, Warschau, Polen; 18.09.2017 - 21.09.2017; in: "Abstracts", (2017), Paper-Nr. I.P.49, 1 S.

V. Lapkovskis, A. Bartl:
"Recycling of tungsten-containing hard metals";
Vortrag: E-MRS - 2017 Fall Meeting, Warschau, Polen; 18.09.2017 - 21.09.2017; in: "Abstracts", (2017), Paper-Nr. I.4.3, 1 S.

V. Lapkovskis, A. Bartl:
"Yttrium: demand and recycling opportunities";
Poster: E-MRS - 2017 Fall Meeting, Warschau, Polen; 18.09.2017 - 21.09.2017; in: "Abstracts", (2017), Paper-Nr. I.P.46, 1 S.

V. Lapkovskis, A. Bartl, D. Koch:
"Sustainability for critical raw materials in a framework of COST Action CA15102 CRM-EXTREME";
Poster: E-MRS - 2017 Fall Meeting, Warschau, Polen; 18.09.2017 - 21.09.2017; in: "Abstracts", (2017), Paper-Nr. I.P.17, 1 S.

J. Lederer, A. Aldrian, A. Bartl, J. Fellner, D. Blasenbauer, L. Gritsch, W. Ipsmiller, P. Kählig, J. Mühl, S. Skutan:
"Towards a recycling-based circular economy: a conceptual approach";
Vortrag: Sardinia 2021, 18th International Symposium on Waste Management and Sustainable Landfilling (Hybrid Conference), Santa Margherita di Pula, Sardinien, Italien; 11.10.2021 - 15.10.2021; in: "Proceedings Sardinia 2021", (2021), ISBN: 978-8-8626-5026-7; Paper-Nr. 1412, 3 S.

C. Pfeffer, W. Gindl-Altmutter, A. Bartl, J. Gießwein, M. Riegler:
"Effects of raw material on the morphology of MDF fibers";
Vortrag: 5th PTF BPI 2018 - Processing Technologies for the Forest and biobased Products Industries, München, Deutschland; 20.09.2018 - 21.09.2018; in: "Proceedings", (2018), S. 75 - 79.

D. Pico, A. Bartl:
"Characteristics of Composite Materials in thermal Waste Treatment";
Vortrag: XII International Waste Management and Landfill Symposium, Cagliari, Italien; 05.10.2009 - 09.10.2009; in: "XII International Waste Management and Landfill Symposium - Proceedings", (2009), ISBN: 978-88-6265-007-6; 10 S.

D. Pico, A. Bartl:
"Chemical Treatment of Glass Fibers After Composite Recycling Process";
Vortrag: ISWA World Congress 2010, Hamburg, Deutschland; 15.11.2010 - 18.11.2010; in: "Papers and Proceedings", (2010), 9 S.

D. Pico, A. Bartl:
"End-of-Life Glass fibre reinforcement : eco-design";
Poster: Junior Scientist Conference 2010, Vienna; 07.04.2010 - 09.04.2010; in: "Proceedings", (2010), ISBN: 978-3-200-01797-9; S. 361 - 362.

D. Pico, A. Bartl:
"Glasfaser verstärkte Kunststoffe : Szenario für eine Wiederverwendung der Faserfraktion";
Vortrag: DepoTech 2010, Leoben; 03.11.2010 - 05.11.2010; in: "DepoTech 2010 - Abfallwirtschaft, Abfalltechnik, Deponietechnik und Altlasten", (2010), ISBN: 978-3-200-02018-4; S. 407 - 412.

D. Pico, A. Bartl:
"Image Analysis for Simultaneous Determination of Spherical and Fibrous Particles";
Vortrag: ICheaP-10 , 10th International Conference on Chemical and Process Engineering, Florenz, Italien; 08.05.2011 - 11.05.2011; in: "Chemical Engineering Transactions", 24 (2011), ISSN: 1974-9791; S. 619 - 624.

D. Pico, A. Bartl:
"Thermal Treatment of End-of-Life Fiber Composite";
Vortrag: ISWA World Congress 2009, Lissabon, Portugal (eingeladen); 12.10.2009 - 15.10.2009; in: "ISWA World Congress 2009 - Proceedings", (2009), 10 S.

D. Pico, A. Bartl:
"Verwertung von faserverstärkten Kunststoffen";
Poster: 5.Minisymposium Verfahrenstechnik, Wien; 24.06.2009 - 25.06.2009; in: "5.Minisymposium Verfahrenstechnik - Tagungsband", (2009), ISBN: 978-3-9502731-0-6; S. 139 - 144.

D. Pico, M. Gröstlinger, A. Bartl:
"Possibilities to determine length and width of recycled short fibers";
Vortrag: 6th European Meeting on Chemical Industry and Environment (EMChIE 2010), Mechelen, Belgien; 17.05.2010 - 19.05.2010; in: "EMChIE 2010 Conference Proceedings (Vol.2)", (2010), ISBN: 9789081548601; S. 1025 - 1033.

D. Pico, A. Kaineder, A. Bartl:
"Wind Power Plants - Waste Recycling";
Vortrag: CRETE 2010 - 2nd International Conference on Hazardous and Industrial Waste Management, Chania, Kreta, Griechenland; 05.10.2010 - 08.10.2010; in: "CRETE 2010", (2010), 8 S.

B. Piribauer, A. Bartl:
"TEX2MAT - A Novel Approach Towards A Circular Economy In The Textile Sector With The Help Of Bio Catalysts";
Vortrag: ISWA World Congress 2018, Kuala Lumpur, Malaysia; 22.10.2018 - 24.10.2018; in: "Book of Proceedings", (2018), 5 S.

B. Piribauer, W. Ipsmiller, A. Bartl:
"A circular economy solution for mixed material textiles";
Vortrag: ISWA World Congress 2019, Bilbao, Spanien; 07.10.2019 - 09.10.2019; in: "Proceedings", (2019), 2 S.

B. Piribauer, W. Ipsmiller, B. Steinacker, T. Laminger, D. Koch, A. Bartl:
"Simulation of natural degradation of cellulosic fibres with cellulase bioreactors";
Vortrag: sardinia_2019 - 17th International Waste Management and Landfill Symposium, Santa Margherita di Pula, Italien; 30.09.2019 - 04.10.2019; in: "Proceedings", (2019), ISBN: 978-8-862650-14-4; Paper-Nr. 133, 4 S.

B. Piribauer, U. Jenull-Halver, W. Ipsmiller, T. Laminger, D. Koch, A. Bartl:
"TEX2MAT -Next level textile recycling with biocatalysts";
Vortrag: sardinia_2019 - 17th International Waste Management and Landfill Symposium, Santa Margherita di Pula, Italien; 30.09.2019 - 04.10.2019; in: "Proceedings", (2019), ISBN: 978-8-862650-14-4; Paper-Nr. 134, 6 S.

B. Piribauer, T. Laminger, W. Ipsmiller, B. Poosch, A. Bartl:
"Assessment Of Sieving As A Measurement Method For Micro Fibres In Wastewater";
Poster: ISWA World Congress 2018, Kuala Lumpur, Malaysia; 22.10.2018 - 24.10.2018; in: "Book of Proceedings", (2018), 7 S.

B. Piribauer, B. Steinacker, T. Laminger, W. Ipsmiller, A. Bartl:
"Quantification of microfibres in wastewater- Experimental assessment of sieve analysis using various fibre materials";
Vortrag: 15th Minisymposium Verfahrenstechnik, Leoben; 29.04.2019 - 30.04.2019; in: "Conference Proceedings", (2019), ISBN: 978-3-200-06348-8; S. 17 - 20.

B. Piribauer, B. Steinacker, T. Laminger, W. Ipsmiller, A. Bartl:
"TEX2MAT- Enzymatic Textile Recycling For A Circular Economy And a Green Planet";
Poster: 15th Minisymposium Verfahrenstechnik, Leoben; 29.04.2019 - 30.04.2019; in: "Conference Proceedings", (2019), ISBN: 978-3-200-06348-8; S. 90.

M. Winter, A. Bartl, T. Laminger:
"Kostengünstige Analysentechnik zur Bestimmung von Faserlängen";
Vortrag: 11. Minisymposium Verfahrenstechnik, Wien; 14.04.2015 - 15.04.2015; in: "Proceedings", (2015), ISBN: 978-3-200-04069-4; S. 238 - 239.


Vorträge und Posterpräsentationen (ohne Tagungsband-Eintrag)


B. Appelqvist, A. Bartl, J. Cooper:
"Definition of recycling: preparing a level playing field";
Vortrag: ISWA'15 World Congress, Antwerpen, Belgien (eingeladen); 07.09.2015 - 09.09.2015.

B. Appelqvist, A. Loureiro, B. Kamuk, T. Hulgaard, A. Bartl, J. Bart, C. Velis, M. Brocklehurst, P. Borkey, E. Tonda:
"ISWA Task Force on resource management";
Vortrag: ISWA'15 World Congress, Antwerpen, Belgien (eingeladen); 07.09.2015 - 09.09.2015.

A. Bartl:
"Basalt fiber - a non-critical alternative in the building and construction sector";
Vortrag: COST Action CRM-Extreme, Riga, Lettland; 20.06.2019 - 21.06.2019.

A. Bartl:
"Basaltfasern : Eine Standortbestimmung";
Vortrag: 11. Textiltagung - Neue Rohstoffe für Textilien, Dübendorf, Zürich, Schweiz; 28.10.2010.

A. Bartl:
"Cascade Model & Recycling";
Vortrag: ISWA Task Force for Resource Management, 1st Coordination Meeting, Wien (eingeladen); 03.12.2014.

A. Bartl:
"Cascade Model & Recycling Quality";
Vortrag: ISWA STC Meeting 2014, Wien (eingeladen); 04.12.2014.

A. Bartl:
"Challenges resulting from the Waste Hierarchy from the perspective of WG Recycling and Waste Minimisation";
Vortrag: ISWA European Group Meeting "Waste Hierarchy - Induced Challenges", Brüssel, Belgien (eingeladen); 16.06.2014 - 17.06.2014.

A. Bartl:
"Circular Economy and the Fiber Industry";
Vortrag: ISWA World Congress 2018, Kuala Lumpur, Malaysia; 22.10.2018 - 24.10.2018.

A. Bartl:
"Circular Economy for Critical Raw Materials";
Vortrag: ISWA World Congress 2018 - Post Congress Workshop, Kuala Lumpur, Malaysia; 25.10.2018.

A. Bartl:
"Circular Economy for Textiles and Fibres";
Vortrag: ISWA World Congress 2018 - Post Congress Workshop, Kuala Lumpur, Malaysia; 25.10.2018.

A. Bartl:
"Circular Economy: applications and open issues";
Vortrag: Green Expo del Mediterraneo, Catania, Italien; 14.07.2021 - 16.07.2021.

A. Bartl:
"Circular Economy: Resources and opportunities";
Hauptvortrag: IRRC Waste-to-Energy, Wien (eingeladen); 12.10.2015 - 13.10.2015.

A. Bartl:
"Circular Economy: Textile & Nonwoven Waste";
Hauptvortrag: Expert Panel & Workshop, Dornbirn; 12.09.2017.

A. Bartl:
"Critical Raw Materials: What actually is criticality?";
Vortrag: FEMS Junior EUROMAT 2018, Budapest, Ungarn; 08.07.2018 - 12.07.2018.

A. Bartl:
"Cycles, loops and cascades";
Vortrag: ISWA Task Force - Circular Economy: Resources and Opportunities: The challenge of circular economy and the waste management industry, Brüssel, Belgien (eingeladen); 03.11.2015.

A. Bartl:
"Definition of Recycling";
Vortrag: ISWA Solid Waste World Congress 2014, Sao Paulo, Brasilien; 08.09.2014 - 11.09.2014.

A. Bartl:
"Definition of Recycling (Presentation of the revised paper)";
Vortrag: ISWA Working Group on Recycling and Waste Minimisation, München, Deutschland (eingeladen); 06.05.2014.

A. Bartl:
"Der Beitrag der stofflichen Verwertung zur textilen Kreislaufwirtschaft - Vom Downcycling zum "Closed-Loop-Recycling"";
Vortrag: Österreichische Re-Use Konferenz 2021, Graz (eingeladen); 19.05.2021.

A. Bartl:
"Eine Bestandsaufnahme im Hinblick auf die Kreislaufwirtschaft";
Vortrag: Netzwerktreffen PlasTexTron "Circular Economy in der Textilbranche - Chance oder Herausforderung?", St. Pölten; 26.06.2018.

A. Bartl:
"Fashion-Trend: Recycling und Upcycling für nachhaltige Mode (Impulsvortrag 2)";
Vortrag: Umwelt und Wirtschaft: Geht das (gut)?, Klagenfurt; 10.11.2016.

A. Bartl:
"Fast Fashion - A suitable business model in times of the circular economy?";
Vortrag: Lectures for Future, WU, Wien (eingeladen); 02.11.2020.

A. Bartl:
"Fiber Recycling - Possible scenarios and Saving potentials";
Vortrag: Euratex - 2010 General Assembly "Sustainability in the European Apparel and Textile Industry", Brüssel, Belgien; 10.06.2010.

A. Bartl:
"Fibers and textiles";
Vortrag: ISWA Study Tour Collection - Sorting - Recycling, Wien; 22.09.2014 - 26.09.2014.

A. Bartl:
"Fibers and Textiles";
Vortrag: ISWA Study Tour 2016, Collection - Sorting - Recycling, Wien (eingeladen); 25.04.2016 - 29.04.2016.

A. Bartl:
"Fibres Recovery and Recycling";
Vortrag: Joint Meeting of Euratex Environment Committee & TEG 8, Brüssel; 06.03.2008.

A. Bartl:
"Recovery of glass fibers from end-of-life thermosetting composites";
Vortrag: Round-table meetings on EU project proposals, S. Margherita di Pula, Cagliari, Italien; 06.10.2015.

A. Bartl:
"Results of the WGRWM project - The ISWA Training Package on Sorting Plants";
Vortrag: ISWA Beacon Conference Resources from Waste: Sorting and Treatment Techniques, Hamburg, Deutschland; 14.10.2015 - 16.10.2015.

A. Bartl:
"Roadmap to a resource efficient Europe";
Vortrag: ISWA European Group Meeting, Brüssel, Belgien (eingeladen); 03.09.2013 - 04.09.2013.

A. Bartl:
"Strategies in Resource Management and Circular Economy Fibers and Textiles";
Vortrag: ISWA Study Tour 2018 - Collection-Sorting-Recycling, Wien; 23.04.2018 - 27.04.2018.

A. Bartl:
"Strategies in Resource Management and Circular Economy Fibers and Textiles";
Vortrag: ISWA Study Tour 2019 Collection-Sorting-Recycling, Wien; 06.05.2019 - 10.05.2019.

A. Bartl:
"Strategies in Resource Management and Circular Economy for Fibers and Textiles";
Vortrag: Stakeholder Consultation Ethical Textile Recycling, ISWA Roundtable, Rotterdam, Niederlande (eingeladen); 16.07.2019.

A. Bartl:
"Textiles in a Circular Economy";
Vortrag: Syposium "Science and Research for Circular Economy", Wien; 24.10.2019.

A. Bartl:
"The EU circular economy package with regards to CRMs";
Vortrag: Workshop on EQUINOX technology, Athen, Griechenland; 23.07.2019.

A. Bartl:
"Towards a Circular Fashion Industry";
Vortrag: Talk: Towards a Circular Fashion Industry, Wien; 21.02.2018.

A. Bartl:
"Turning fibrous waste into a resource";
Vortrag: Joint ISWA Working Group Meeting, Lissabon, Portugal; 13.10.2009.

A. Bartl:
"Update on Recycling Definition paper";
Vortrag: ISWA STC Meeting, Rom, Italien; 22.01.2014.

A. Bartl:
"Waste tires - a valuable raw material";
Poster: ISWA World Enviroment Copngress and Exhibition, Rom, Italien; 17.10.2004 - 21.10.2004.

A. Bartl, C. Velis:
"Resource management ISWA Task Force, Overview of the TF findings - Materials and technologies for closing the loops";
Vortrag: ISWA Beacon Conference Resources from Waste: Sorting and Treatment Techniques, Hamburg, Deutschland; 14.10.2015 - 16.10.2015.

A. Bartl, M. Winter:
"Entwicklung einer günstigen Analysentechnik zur Bestimmung von Faserlängen";
Vortrag: ProcessNet Jahrestreffen der Fachgruppen Kristallisation, Partikelmesstechnik, Zerkleinern & Klassieren, Magdeburg, Deutschland (eingeladen); 18.03.2015 - 20.03.2015.

E. Boschmeier, A. Bartl:
"System CircularityandInnovative Recycling ofTextiles (SCIRT)";
Vortrag: Symposium "Science and Research for Circular Economy" 2021, Wien; 19.10.2021.

W. Ipsmiller, A. Bartl:
"An Optical Method for the Analysis of Gel Particles in Viscose";
Vortrag: 13th International Conference on Chemical and Process Engineering, Mailand, Italien; 28.05.2017 - 31.05.2017.

W. Ipsmiller, A. Bartl:
"Particle Measurement in Viscose Spinning Solutions and Regenerated Cellulose";
Vortrag: Dornbirn Man-Made Fibers Congress 2017, Dornbirn; 13.09.2017 - 15.09.2017.

W. Ipsmiller, A. Bartl, G. Gübitz, G. Ruppert:
"A circular economy solution for the complete recycling of the components of flame retardant protective clothing";
Vortrag: 57th Dornbirn Global Fiber Congress - Dornbirn-GFC, Dornbirn; 12.09.2018 - 14.09.2018.

W. Ipsmiller, A. Bartl, P. Kählig:
"Recycling Municipal Textile Waste";
Vortrag: The RISE Discussions #1 (Hybrid Conference), Tel Aviv, Israel; 22.06.2021.

T. Laminger, A. Bartl, L. Holzner:
"Morphologische Charakterisierung von Fasern und sphärischen Partikeln aus einem Recyclingprozess";
Vortrag: 3. Partikelforum, Graz; 31.03.2016.

T. Laminger, B. Piribauer, W. Ipsmiller, A. Bartl:
"Assessment of sieving for the analysis of micro fibres in waste water";
Vortrag: 57th Dornbirn Global Fiber Congress - Dornbirn-GFC, Dornbirn; 12.09.2018 - 14.09.2018.

V. Lapkovskis, A. Bartl:
"The New Circular Economy Package and Its Possible Impact on Critical Raw Materials";
Poster: CRM-EXTREME Meeting, Burgos, Spanien; 06.10.2016 - 07.10.2016.

J. Lederer, A. Bartl:
"Recyclingbasierte Kreislaufwirtschaft";
Vortrag: Symposium "Science and Research for Circular Economy" 2021, Wien; 19.10.2021.

B. Lux, A. Bartl, R. Haubner, W. Kalss, H. Sachdev, X. Tang:
"Synthesis of cubic BN without high pressure?";
Vortrag: IUMRS-ICA-97 Symposium I,Super Carbon, Tokio (eingeladen); 16.09.1997 - 17.09.1997.

B. Piribauer, A. Bartl, W. Ipsmiller:
"Enzymatic Textile Recycling - Best Practices and Outlook";
Vortrag: ISWA World Congress 2021, Athen, Griechenland (eingeladen); 04.10.2021 - 07.10.2021.

M. Winter, A. Bartl:
"Study on the grinding process of cellulosic fibers in a cutting mill and analysis of thereby obtained short fibers";
Vortrag: 53. Chemiefasertagung (53rd Man-made Fibers Congress), Dornbirn; 10.09.2014 - 12.09.2014.


Patente


M. Bahardoust, I. Marini, F. Neubacher, B. Mihalyi, A. Bartl:
"Verfahren zur Verwertung von Polymerarmierten Elastomerprodukten";
Patent: Österreich, Nr. AT 413 355 B; eingereicht: 09.04.2003, erteilt: 15.02.2006.

M. Bahardoust, I. Marini, F. Neubacher, B. Mihalyi, A. Bartl:
"Verfahren zur Verwertung von Polymerarmierten Elastomerprodukten,Faserfraktion,Bituminöses Mischgut,Baumaterial und Vorrichtung";
Patent: Österreich, Nr. WO 2004/089610 A2; eingereicht: 08.04.2004, erteilt: 21.10.2004.

A. Bartl:
"Ignition Mixture";
Patent: Österreich, Nr. Wo 00/66517; eingereicht: 28.04.2000, erteilt: 09.11.2000.

A. Bartl, I. Marini, A. Haner:
"Zuschlagstoff für die Herstellung von Baumaterialien";
Patent: Österreich, Nr. At 508 898 B1; eingereicht: 20.11.2009, erteilt: 15.05.2011.

A. Bartl, M. Wistuba, I. Marini, M. Spiegl, R. Blab:
"Method for Producing an Aggregate for Producing Building Materials";
Patent: USA, Nr. Us 2011/0041733 A1; eingereicht: 25.10.2010, erteilt: 24.02.2011.

A. Bartl, M. Wistuba, I. Marini, M. Spiegl, R. Blab:
"Verfahren zur Herstellung eines Zuschlagstoffs für die Herstellung von Baumaterialien";
Patent: Österreich, Nr. Wo 2008/142107 A1; eingereicht: 21.05.2008, erteilt: 27.11.2008.

A. Bartl, M. Wistuba, I. Marini, M. Spiegl, R. Blab:
"Verfahren zur Herstellung eines Zuschlagstoffs für die Herstellung von Baumaterialien";
Patent: Europa, Nr. Ep 2 146 938 B1; eingereicht: 21.05.2008, erteilt: 13.07.2011.

A. Bartl, M. Wistuba, M. Spiegl, I. Marini, R. Blab:
"Verfahren zur Herstellung eines Zuschlagstoffs für die Herstellung von Baumaterialien";
Patent: Österreich, Nr. At 504 885 B1 2008-09-15; eingereicht: 21.05.2007, erteilt: 15.09.2008.

C. Reinthaller, A. Bartl, I. Marini, A. Haner:
"Zuschlagstoff für die Herstellung von Baumaterialien";
Patent: Europa, Nr. Ep 2 325 148 A1; eingereicht: 22.11.2010, erteilt: 25.05.2011.


Habilitationsschriften


A. Bartl:
"Recycling von Fasern";
TU Wien, Fakultät für Technische Chemie, 2012.


Dissertationen (eigene und begutachtete)


P. Begert:
"Helle Zinkpigmente aus der Trockenmahlung";
Betreuer/in(nen), Begutachter/in(nen): I. Marini, A. Bartl; Institut für Verfahrenstechnik, Umwelttechnik und Technische Biowissenschaften, 2006.

An. Hackl:
"Stoffliche Verwertung der Faserfraktion aus dem Altreifenrecycling";
Betreuer/in(nen), Begutachter/in(nen): I. Marini, A. Bartl; Istitut für Verfahrenstechnik,Umwelttechnik und Technische Biowissenschaften, 2006; Rigorosum: 2006.

R. Warrings:
"Circular Economy of Packaging Aluminium - An analysis of the current practice and future potential (Kreislaufwirtschaft von Aluminiumverpackungen - Eine Analyse von Status quo und zukünftigen Verbesserungspotentialen)";
Betreuer/in(nen), Begutachter/in(nen): J. Fellner, M. Grosso, A. Bartl; Institut für Wassergüte und Ressourcenmanagement, TU Wien, 2020; Rigorosum: 11.09.2020.

Zusätzliche Informationen


Diplom- und Master-Arbeiten (eigene und betreute)


P. Begert:
"Coding of bank notes by solid inorganic metal compounds";
Betreuer/in(nen): I. Marini, A. Bartl; Institut für Verfahrenstechnik, Umwelttechnik und Technische Biowissenschaften, 2003.

U. Flener:
"Evaluierung von neuen Messmethoden und Schlüsselparametern zur Berwertung der Bedruckbarkeit von gestrichenem Papier mit wasserbasierenden High-Speed Inkjet Tinten";
Betreuer/in(nen): A. Bartl, B. Mihalyi; Institut für Verfahrenstechnik, Umwelttechnik und Technische Biowissenschaften, 2018; Abschlussprüfung: 29.11.2018.

M. Gerhardus:
"Einsatz von Trockenfestmitteln in der Kraftsackpapierherstellung";
Betreuer/in(nen): S. Knaus, H. Hofbauer, A. Bartl; IAS, 2015; Abschlussprüfung: 30.11.2015.

W. Höltl:
"Mikronisierte faserfreie Cellulose";
Betreuer/in(nen): I. Marini, A. Bartl; Institut für Verfahrenstechnik, Umwelttechnik und Technische Biowissenschaftten, 2006.

S. Hofer:
"Labormaßstäbliche Untersuchungen zur thermischen Abtrennung von Quecksilber aus Filterkuchen von Müllverbrennungsanlagen";
Betreuer/in(nen): J. Fellner, A. Bartl; Institut für Wassergüte und Ressourcenmanagement, 2021; Abschlussprüfung: 26.07.2021.

M. Hoi:
"Behandlung und Abtrennung von Additiven, Störstoffen und funktionellen Faserfraktionen beim Textilrecycling";
Betreuer/in(nen): A. Bartl, W. Ipsmiller; Institut für Verfahrenstechnik, Umwelttechnik und Technische Biowissenschaften, 2021; Abschlussprüfung: 11.08.2021.

W. Ipsmiller:
"Entwicklung einer optischen Methode zur Analyse von Gelpartikelfrachten im Viskoseprozess";
Betreuer/in(nen): A. Bartl; Institut für Verfahrenstechnik, Umwelttechnik und Technische Biowissenschaften, 2019; Abschlussprüfung: 18.12.2019.

R. Janknecht:
"Zeta potential analysis of regenerated cellulose fibers";
Betreuer/in(nen): A. Bartl; Institut für Verfahrenstechnik, Umwelttechnik und Technische Biowissenschaften, 2020; Abschlussprüfung: 28.07.2020.

E. Kendik:
"Prozessoptimierung in der Erzeugung von Kartoffeldauerprodukten";
Betreuer/in(nen): A. Bartl, E. Korherr; Institut für Verfahrenstechnik,Umwelttechnik und Technische Biowissenschaften, 2013; Abschlussprüfung: 18.07.2013.

H. Lutz:
"Untersuchungen zum Ressourcenpotential von Filterkuchen aus Müllverbrennungsanlagen";
Betreuer/in(nen): A. Bartl, J. Fellner, F. Huber; Institut für Wassergüte und Ressourcenmanagement, 2019; Abschlussprüfung: 11.01.2019.

L. Madtha:
"Modifying Viscosity by Using Short Fibres";
Betreuer/in(nen): I. Marini, A. Bartl; Institut für Verfahrenstechnik, Umwelttechnik und Technische Biowissenschaften, 2006.

T. Ruh:
"Untersuchung der Dispergierbarkeit nanoskaliger Additive in Viskose-Spinnlösungen";
Betreuer/in(nen): A. Bartl; Institut für Verfahrenstechnik, Umwelttechnik und Technische Biowissenschaften, 2015; Abschlussprüfung: 06.03.2015.

B. Steinacker:
"Enzymatische Hydrolyse von zellulosebasierten Fasern";
Betreuer/in(nen): A. Bartl, B. Piribauer; Institut für Verfahrenstechnik, Umwelttechnik und Technische Biowissenschaften, 2019; Abschlussprüfung: 13.06.2019.

M. Winter:
"Study on the Grinding Process of Cellulosic Fibers and Characterization of thereby Obtained Short Fibers";
Betreuer/in(nen): A. Bartl; Institut für Verfahrenstechnik, Umwelttechnik und Technische Biowissenschaften, 2015; Abschlussprüfung: 15.01.2015.


Wissenschaftliche Berichte


A. Bartl:
"Circular Economy: Cycles, Loops and Cascades (2)";
Bericht für ISWA - International Solid Waste Association; 2015; 46 S.

A. Bartl:
"Stoffliche Verwertung der textilen Restfraktion 814961 (Zwischenbericht)";
Bericht für BM für Verkehr, Innovation und Technologie; 2009; 21 S.

A. Bartl, W. Ipsmiller et al.:
"Strategy paper";
Bericht für European Circular Economy Stakeholder Platform (ECESP) Coordination Group; 2020; 2 S.

A. Bartl, D. Pico, I. Marini:
"Aufbau einer Produktion für ein feintitriges Basalt Multifilmament (Kurzbericht)";
Bericht für ASA.TEC; 2007.

An. Hackl, A. Bartl, I. Marini:
"1.Zwischenbericht: Stoffliche Verwertung der Faserfraktion aus dem Altreifenrecycling";
2004.

An. Hackl, A. Bartl, I. Marini:
"2.Zwischenbericht: Stoffliche Verwertung der Faserfraktion aus dem Altreifenrecycling";
2004.

An. Hackl, A. Bartl, I. Marini:
"3.Zwischenbericht: Stoffliche Verwertung der Faserfraktion aus dem Altreifenrecycling";
2005.

An. Hackl, A. Bartl, I. Marini:
"4. Zwischenbericht: Stoffliche Verwertung der Faserfraktion aus dem Altreifenrecycling";
2005.

P. Kählig, W. Ipsmiller, A. Bartl, J. Lederer:
"Zwischenbericht zur Ergebnis­besprechung für die Case Study B1 - CD-Labor für recyclingbasierte Kreislaufwirt­schaft - Modul 1, Arbeitspaket 2, Case Study B1";
Bericht für Lenzing AG + Wien Energie; 2021; 15 S.

D. Pico, A. Bartl, I. Marini:
"Aufbau einer Produktion für ein feintitriges Basalt Multifilmament (1.Zwischenbericht)";
Bericht für ASA.TEC; 2007.

C. Roithner, A. Weber, H. Rechberger, A. Bartl, W. Ipsmiller:
"Beschreibung des Stands des Wissens zu Textilrecyclingtechnologien (SWiTex) - Endbericht";
Bericht für BM für Klimaschutz, Umwelt, Energie, Mobilität, Innovation und Technologie; 2021; 121 S.