TU Home
Diese Publikationsliste wurde automatisch aus den Publikationsdaten der TU Wien erstellt. Wenn Sie komplexere Suchabfragen vornehmen wollen, rufen Sie bitte die Seite "Publikationen der Fakultšt" direkt auf, oder verwenden Sie die globale Suchfunktion der Publikationsdatenbank der Technischen Universitšt Wien!


Publikationsdatenbank Home  

Publikationsliste für
Gökcen Bas
als Autorin / Autor bzw. wesentlich beteiligte Person

83 Datensätze (2010 - 2020)


Zeitschriftenartikel


G. Bas, M.N. Durakbasa, J.M. Bauer, G. Poszvek:
"Characterization and Utilization of the Intelligent Decision Making Methodology to Improve Quality and Precision in the Machining Process";
Key Engineering Materials, Precision Machining VIII (2016), Vol. 686; S. 87 - 92.

G. Bas, L. Stoev, M.N. Durakbasa:
"Assessment of the Production Quality in Machining by Integrating a System of High Precision Measurement";
Procedia Engineering, 100 (2015), S. 1616 - 1624.

Zusätzliche Informationen

J.M. Bauer, G. Bas, M.N. Durakbasa, P. Kopacek:
"Development Trends in Automation and Metrology";
Elsevier ScienceDirect IFAC-PapersOnLine, Volume 48 (2015), Issue 24; S. 168 - 172.

Zusätzliche Informationen

J.M. Bauer, M.N. Durakbasa, G. Bas:
"Multi Functional Intelligent Measurement Robot, As a Part of a Global Quality Management System for Collaboration Between Small, Medium and Large Scale Enterprises";
Quality-Access to Success, Vol.13, S5, November 2012 (2012), ISSN: 1582-2559; S. 67 - 72.

Zusätzliche Informationen

J.M. Bauer, M.N. Durakbasa, G. Bas, E. Güclü, P. Kopacek:
"Telepresence in Education";
Elsevier ScienceDirect IFAC-PapersOnLine, Volume 48 (2015), Issue 24; S. 178 - 182.

Zusätzliche Informationen

M. Cakmakci, M.N. Durakbasa, M. Karasu, G. Bas, U. Gurel:
"The importance of quality control within the relationship between the quality engineering and Taguchi methodology";
Key Engineering Materials, 1 (2015), Vol. 637; S. 27 - 35.

M. Cakmakci, N. Ortabas-Demirel, M.N. Durakbasa, G. Bas, A. Hornikova:
"Interaction Between Capability Indices and Skewness of Non-Normal Processes Using Quantile Based Estimation and Johnson Transformation";
Quality-Access to Success, Vol. 13, S5, November 2012 (2012), S. 79 - 86.

Zusätzliche Informationen

C. Davutoglu, M.N. Durakbasa, G. Bas, E. Güclü:
"Improved Quality and Reliability in Telecommunication Network Testing by means of a Remote Online Test System";
International Journal of Online Engineering (iJOE), Vol.10, No.4 (2014), ISSN: 1868-1646; S. 66 - 69.

Zusätzliche Informationen

M.N. Durakbasa, G. Bas:
"From Nano- to Pico- to Femto-: Future Challenges for Cost-Oriented Manufacturing";
Elsevier ScienceDirect IFAC-PapersOnLine, 1 (2019), Volume 52, Issue 25; S. 382 - 386.

Zusätzliche Informationen

M.N. Durakbasa, G. Bas:
"Key Metrology Roadmap in Advanced Manufacturing Technology of Micro-components and Nano-structures";
International Journal of Mechanical Engineering and Automation, Volume 1 (2014), 6; S. 347 - 353.

Zusätzliche Informationen

M.N. Durakbasa, G. Bas, J.M. Bauer:
"Implementing Education Vision in the Context of Industry 4.0";
IOP Conference Series: Materials Science and Engineering (eingeladen), 1 (2018), 448 012045; S. 1 - 6.

Zusätzliche Informationen

M.N. Durakbasa, G. Bas, J.M. Bauer, L. Kräuter:
"Ein intelligentes, vernetztes präzisionsmesstechnisches Konzept als strategischer Ansatz im Forschungs- und Industriebereich";
TM - Technisches Messen, 82 (2015), Heft 1; S. 7 - 15.

M.N. Durakbasa, G. Bas, J.M. Bauer, G. Poszvek:
"Intelligent Design and Advanced Metrology as Strategic Approaches to Efficiency and Quality Improvement in Smart Manufacturing";
International Journal of Advanced Quality, Vol.41 (2013), 1; S. 17 - 22.

Zusätzliche Informationen

M.N. Durakbasa, G. Bas, J.M. Bauer, G. Poszvek:
"Trends In Precision Manufacturing Based On Intelligent Design And Advanced Metrology";
Key Engineering Materials, Trans Tech Publications, Switzerland (2014), Vol.581; S. 417 - 422.

Zusätzliche Informationen

M.N. Durakbasa, G. Bas, J.M. Bauer, D. Riepl:
"A Model of Global Cooperation to Enable Intelligent Metrology Applications by Means of an Integrated Teleoperation System";
International Journal of Online Engineering (iJOE), 1 (2015), Vol 11 No 3; S. 14 - 19.

Zusätzliche Informationen

M.N. Durakbasa, G. Bas, Z. Özkan:
"A New Strategy for Energy - A Proposal of an Energy Management Implementation Model for Productivity Enhancement within the Integrated Management Systems";
Journal of the Institute of Management Services, 1 (2011), Volume 55 Number 2; S. 28 - 30.

M.N. Durakbasa, G. Bas, P.H. Osanna, J.M. Bauer:
"Sustainable Management Systems of Quality, Energy and Environment in Industry / Sisteme durabile de management al calitãtii, energiei si mediului în industrie";
Quality - access to success, Anul 12 (2011), 4; S. 21 - 25.

M.N. Durakbasa, J.M. Bauer, G. Bas, L. Kräuter:
"Novel Trends in the Development of Autonomation and Robotics in Metrology for Production in the Future";
Elsevier ScienceDirect IFAC-PapersOnLine, Volume 49 (2016), Issue 29.

Zusätzliche Informationen

M.N. Durakbasa, J.M. Bauer, G. Bas, L. Kräuter:
"Towards a sophisticated approach to cost oriented automation and intelligent metrology in the advanced manufacturing";
Elsevier ScienceDirect IFAC-PapersOnLine, 1 (2018), 51-30; S. 54 - 59.

Zusätzliche Informationen

M.N. Durakbasa, J.M. Bauer, G. Bas, D. Riepl:
"Telepresence and Teleoperation in Work Concept of Multifunctional Intelligent Factories: Experience of Telepresence in the Micro and Nano Metrology Laboratory AuM-TU-Wien";
Quality-Access to Success, Vol.13, S5, November 2012 (2012), S. 131 - 136.

Zusätzliche Informationen

M.N. Durakbasa, I. Bogrekci, P. Demircioglu, G. Bas, A. Günay:
"Surface characterization by accurate measurement and image processing systems on machined surfaces of precision cutting tools";
JAMRIS - Journal of Automation, Mobile Robotics & Intelligent Systems, Volume 6 (2012), 03; S. 51 - 56.

M.N. Durakbasa, P. Demircioglu, I. Bogrekci, G. Bas, A. Gunay Bulutsuz:
"Assessment of machining with uncoated and coated end mills and determining surface topography using 2D fast Fourier transform";
International Journal of Nanomanufacturing, Vol.8 (2012), 5/6; S. 493 - 507.

Zusätzliche Informationen

M.N. Durakbasa, P.H. Osanna, G. Bas:
"Advanced Management Systems for Quality, Energy and Environment for Efficiency Enhancement of Modern Manufacturing Industries";
International Journal Advanced Quality, Vol.40/2/Belgrade (2012), UDC 658.5; S. 11 - 19.

M.N. Durakbasa, P.H. Osanna, G. Bas:
"Intelligent Design and Advanced Metrology to Support and Improve Integrated Management Systems for Quality, Environment and Energy in Production Engineering";
Quality-Access to Success, Vol.13, S5, November 2012 (2012), S. 17 - 22.

Zusätzliche Informationen

M.N. Durakbasa, P.H. Osanna, G. Bas, P. Demircioglu, M. Cakmakci, A. Hornikova:
"Novel Developments in Dimensional Nanometrology in the Context of Geometrical Product Specifications and Verification (GPS)";
JAMRIS - Journal of Automation, Mobile Robotics & Intelligent Systems, Volume 6 (2012), 02; S. 22 - 25.

M.N. Durakbasa, P.H. Osanna, J.M. Bauer, G. Bas:
"Innovation In Production Metrology For Precision Engineering And To Support Sustainability And Improvement Of Process And Product Quality In Modern Manufacturing Industry";
MSD Journal, Volume 4 (2012), 1; S. 5 - 11.

L. Kandrac, I. Mankova, M. Vrabel, J. Beno, J. Stahovec, M.N. Durakbasa, G. Bas:
"Statistical Analysis of Cutting Force, Temperature and Power of FEM Modeling when Machining Titanium Alloy";
Applied Mechanics and Materials Trans Tech Publications, 1 (2014), Vol. 693; S. 358 - 363.


Buchbeiträge


G. Bas, W. Pirker, L. Kräuter, E. Güclü, L. Durakbasa:
"Developments in Biomedical Techniques Through Digital Transformation of Industry 4.0 - Applications in Tissue and Dental Implants";
in: "Proceedings of the International Symposium for Production Research 2018", Springer, 2018, ISBN: 978-3-319-92267-6, S. 391 - 401.

Zusätzliche Informationen

A. Bauer, G. Bas, M.N. Durakbasa, L. Kräuter, G. Ugur-Tüncer:
"Measurement Technology & Quality & Justicia in Industry 4.0";
in: "Proceedings of the International Symposium for Production Research 2018", Springer, 2018, ISBN: 978-3-319-92267-6, S. 438 - 450.

Zusätzliche Informationen

M.N. Durakbasa, G. Bas, J.M. Bauer:
"Developments in Advanced Production Engineering Enabled By High Precision Metrology";
in: "Development In Machining Technology", Vol. 6; Cracow University of Technology, 2016, ISBN: 978-80-553-2576-7, S. 144 - 154.

Zusätzliche Informationen

M.N. Durakbasa, J.M. Bauer, L. Kräuter, G. Bas, G. Poszvek:
"Intelligent Integrated Management and Advanced Metrology for Quality Toward the Factory of the Future";
in: "Proceedings of 3rd International COnference on the Industry 4.0 Model for Advanced Manufacturing", Springer, 2018, ISBN: 978-3-319-89563-5, S. 98 - 108.

Zusätzliche Informationen

M.N. Durakbasa, P. Demircioglu, G. Bas:
"Metrological Evaluations at Micro- and Nanoscaled Surface Characteristics via Process Management Approach";
in: "Development of Surface Metrology, Pawel Pawlus (ed.) et al.", herausgegeben von: University of Bielsko-Biala; Development of Surface Metrology, Pawel Pawlus (ed.) et al., Bielsko-Biala, Polen, 2012, ISBN: 978-83-63713-24-9, S. 45 - 56.

M.N. Durakbasa, P. Demircioglu, J.M. Bauer, I. Bögrekci, G. Bas, O. Bodur, G. Poszvek:
"Additive Miniaturized-Manufactured Gear Parts Validated by Various Measuring Methods";
in: "Proceedings of the 12th International Conference on Measurement and Quality Control - Cyber Physical Issue IMEKO TC 14 2019, Lecture Notes in Mechanical Engineering (LNME)", Springer International Publishing AG, 2019, ISBN: 978-3-030-18176-5, S. 276 - 290.

Zusätzliche Informationen

F. Folkvord, L. Peschke, G. Bas, S. Vitiello, N. Spunda:
"Peer Learning Methodology for Sustainable Energy Usage";
in: "Proceedings of the International Symposium for Production Research 2019, Lecture Notes in Mechanical Engineering book series (LNME)", M.N. Durakbasa, G. Gencyilmaz (Hrg.); Springer Nature Switzerland AG, Cham, Switzerland, 2019, ISBN: 978-3-030-31343-2, S. 62 - 76.

Zusätzliche Informationen

M. Hasan, J. Svorcan, D. Tanovic, G. Bas, M.N. Durakbasa:
"Conceptual Design and Fluid Structure Interaction Analysis of a Solar Powered High-Altitude Pseudo-Satellite (HAPS) UAV Wing Model";
in: "Digital Conversion on the Way to Industry 4.0 - Selected Papers from ISPR2020, September 24-26, 2020, Lecture Notes in Mechanical Engineering", ISSN 2195-4364; Springer Nature Switzerland AG, Cham, Switzerland, 2020, ISBN: 978-3-030-62784-3, 13 S.

Zusätzliche Informationen

L. Kandrac, I. Mankova, M. Vrabel, J. Beno, M.N. Durakbasa, G. Bas:
"Outline Of Cutting Edge Preparation And Model Proposal For Nanometrological Process Management";
in: "Scientific Research Reports "Development in Machining Technology"", W. Zebala, I. Mankova (Hrg.); herausgegeben von: Cracow University of Technology; Development in Machining Technology, Krakow, Polen, 2013, ISBN: 978-83-7242-655-0, S. 62 - 81.

Zusätzliche Informationen

L. Kandrac, I. Mankova, M. Vrabel, J. Beno, J. Stahovec, M.N. Durakbasa, G. Bas:
"Application of FEM Analysis to Predict the Effect of Cutting Conditions and Tool Geometry on Temperature and Cutting Forces During Orthogonal Cutting of Ti-6Al-4V";
in: "Scientific Research Reports "Development in Machining Technology"", herausgegeben von: Cracow University of Technology; Development in Machining Technology, 2014, ISBN: 9788372427656, S. 52 - 74.

Zusätzliche Informationen

ö. Sen, M.N. Durakbasa, G. Bas, G. Sen, O. Akcatepe:
"An Implementation of Cloud Based Simulation in Production";
in: "Proceedings of the International Symposium for Production Research 2019, Lecture Notes in Mechanical Engineering book series (LNME)", 1; M.N. Durakbasa, G. Gencyilmaz (Hrg.); Springer Nature Switzerland AG, Cham, Switzerland, 2019, ISBN: 978-3-030-31343-2, S. 519 - 524.

Zusätzliche Informationen

ö. Sen, M.N. Durakbasa, M. Baysal, G. Sen, G. Bas:
"Smart Factories: A Review of Situation, and Recommendations to Accelerate the Evolution Process";
in: "Proceedings of the International Symposium for Production Research 2018", Springer, 2018, ISBN: 978-3-319-92267-6, S. 464 - 479.

Zusätzliche Informationen

ö. Sen, M.N. Durakbasa, H. Erdol, T. Berber, G. Bas, U. Sevik:
"Implementation of Digitalization In Food Industry";
in: "DAAAM International Scientific Book 2017", 1; B. Katalinic (Hrg.); DAAAM International Vienna, Wien, 2017, (eingeladen), ISBN: 978-3-902734-12-9, S. 91 - 104.

Zusätzliche Informationen


Beiträge in Tagungsbänden


M.N. Durakbasa, G. Bas, J.M. Bauer, L. Kräuter:
"Development Of An Advanced Metrology And Intelligent Quality Management As A Strategic Approach In Manufacturing Industry";
in: "11th IMEKO TC14 Symposium on Laser Metrology for Precision Measurement and Inspection in Industry", herausgegeben von: Curran Associates, Inc.; Curran Associates, Inc. e-media, Red Hook, NY 12571, 2014, ISBN: 978-1-63266-731-1, S. 223 - 226.

M.N. Durakbasa, G. Bas, E. Güclü, W. Pirker:
"An Innovative Technique for Succesful Clinical Dental Implementation by Means of Quality Control and Surface Characterization Analyse";
in: "The Publications of the MultiScience - XXVIII. microCAD International Multidisciplinary Scientific Conference", herausgegeben von: University of Miskolc; University of Miskolc, Miskolc HU, 2014, ISBN: 978-963-358-051-6, Paper-Nr. H8, 7 S.


Vorträge und Posterpräsentationen (mit Tagungsband-Eintrag)


G. Bas, P. Demircioglu, M.N. Durakbasa, P.H. Osanna:
"A nanometrological management approach to assess the profile and the surface characteristics of the end milling tools by multi-measurement analysis";
Vortrag: IMEKO XX World Congress International Measurement Confederation, Busan, Korea; 09.09.2012 - 14.09.2012; in: "Proceedings of XX IMEKO World Congress International Measurement Confederation", (2012), ISBN: 978-89-950000-5-2; 6 S.

Zusätzliche Informationen

G. Bas, M.N. Durakbasa, I. Mankova, J. Beno:
"Application of Nanometrology for Assessing the Machining Tool Geometry and Analysis of the Micro/Nano Structure of the End Milling Tool Surfaces";
Vortrag: 9th International Conference on Measurement, Smolenice, Slowakei; 27.05.2013 - 30.05.2013; in: "Proceedings of the 9th International Conference on Measurement", J. Manka, M. Tysler, M. Witkowsky, i. Frollo (Hrg.); VEDA Publishing House of the Slovak Academy of Sciences, 1 (2013), ISBN: 978-80-969-672-5-4; S. 223 - 226.

Zusätzliche Informationen

M. Cakmakci, M.N. Durakbasa, M. Karasu, G. Bas:
"The relationship between the quality engineering and Taguchi methodology";
Vortrag: ISMQC - International Symposium on Measurement and Quality Control, Krakow-Kielce, Polen; 11.09.2013 - 13.09.2013; in: "Proceedings of the 11th International Symposium on Measurement and Quality Control", Osaka University, (2013), 4 S.

Zusätzliche Informationen

M. Cakmakci, N. Ortabas-Demirel, M.N. Durakbasa, G. Bas, A. Hornikova:
"Interaction Between Capability Indices and Skewness of Non-Normal Processes Using Quantile Based Estimation and Johnson Transformation";
Vortrag: QIEM 2nd International Conference on Quality and Innovation in Engineering and Management, Cluj-Napoca, RO; 22.11.2012 - 24.11.2012; in: "Quality Access to Success - QIEM 2nd International Conference on Quality and Innovation in Engineering and Management", Quality-Access to Success, Vol.13, S5, November 2012 (2012), ISSN: 1582-2559; 8 S.

Zusätzliche Informationen

C. Davutoglu, C. Tepeköylü, E. Güclü, G. Bas:
"INTACT - Intelligent Test Automation System to Achieve Improved Quality";
Vortrag: International Business Information Management Association Conference (IBIMA), Wien, Österreich; 27.06.2013 - 28.06.2013; in: "Vision 2020: Innovation, Development Sustainability, and Economic Growth, Proceedings of the 21st International Business Information Management Association Conference (IBIMA)", (2013), ISBN: 978-0-9860419-0-7; Paper-Nr. 1481-1486, 6 S.

Zusätzliche Informationen

P. Demircioglu, I. Bogrekci, Y. Cerci, C. Deniz, G. Bas, M.N. Durakbasa:
"Assessment of cylinder liners using computer vision andnumerical thermal analyses";
Vortrag: ISMQC - International Symposium on Measurement and Quality Control, Krakow-Kielce, Polen; 11.09.2013 - 13.09.2013; in: "Proceedings of he 11th International Symposium on Measurement and Quality Control", Osaka University, (2013).

Zusätzliche Informationen

M.N. Durakbasa, G. Bas:
"An Analysis Of The Metrology Techniques To Improve Quality And Accuracy";
Vortrag: XXIX. microCAD International Multidisciplinary Scientific Conference, Ungarn; 09.04.2015 - 10.04.2015; in: "MultiScience - XXIX. microCAD International Multidisciplinary Scientific Conference", ITTC Innovation and Technology Transfer Centre, University of Miskolc (2015), ISBN: 978-963-358-061-5; Paper-Nr. D1-1, 7 S.

Zusätzliche Informationen

M.N. Durakbasa, G. Bas:
"Modeling Efficiency Improvement in Industry Through Implementation of Energy Management Systems";
Vortrag: Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, Dubrovnik, Kroatien; 25.09.2011 - 29.09.2011; in: "Proceedings of the 6th Conference", (2011), ISBN: 978-953-7738-12-9; S. 1 - 7.

M.N. Durakbasa, G. Bas:
"Surface Roughness Investigation of the Cutting Edge Of The High Precision Cutting Tools Enabled By Micro and Nanometrological Measurements";
Vortrag: XXVII. microCAD International Scientific Conference, Miskolc, Ungarn; 21.03.2013 - 22.03.2013; in: "Proceedings of the XXVII. microCAD International Scientific Conference", (2013), ISBN: 978-963-358-018-9; 5 S.

Zusätzliche Informationen

M.N. Durakbasa, G. Bas:
"The Integration Of Energy And Environmental Management System To A Model Of Industrial Plant";
Vortrag: XXV, microCAD International Scientific Conference, Miskolc, Ungarn; 31.03.2011 - 01.04.2011; in: "XXV, microCAD International Scientific Conference", ITTC Innovation and Technology Transfer Centre, ME.Tu-162 (2011), ISBN: 978-963-661-954-1; S. 27 - 32.

M.N. Durakbasa, G. Bas, J.M. Bauer:
"A Holistic And Integrated Strategy To Improve Energy Efficiency In Industry By Target-Setting Modeling";
Vortrag: ELAEE 2013, Latin American Meeting on Energy Economics, Montevideo, Uruguay; 08.04.2013 - 09.04.2013; in: "Proceedings of the ELAEE 2013 Conference, 4th Latin American Meeting on Energy Economics", (2013), 5 S.

Zusätzliche Informationen

M.N. Durakbasa, G. Bas, J.M. Bauer, L. Kräuter:
"Development of an advanced metrology and intelligent quality management as a strategic approach in manufacturing industry";
Hauptvortrag: ISMQC - International Symposium on Measurement and Quality Control, Krakow-Kielce, Polen; 11.09.2013 - 13.09.2013; in: "Proceedings of the 11th International Symposium on Measurement and Quality Control", Osaka University, (2013), 4 S.

Zusätzliche Informationen

M.N. Durakbasa, G. Bas, J.M. Bauer, G. Poszvek:
"Intelligent Design and Advanced Metrology as Strategic Approaches to Efficiency and Quality Improvement in Smart Manufacturing";
Hauptvortrag: Total Quality Management-Advanced and Intelligent Approaches (TQM) 2013, Belgrad, Serbien (eingeladen); 03.06.2013 - 07.06.2013; in: "The 7th International Working Conference "Total Quality Management - Advanced and Intelligent Approaches"", (2013), ISBN: 978-86-7083-791-1; Paper-Nr. 17-22, 6 S.

Zusätzliche Informationen

M.N. Durakbasa, G. Bas, P. Demircioglu:
"A nanometrological process management model to assess the end milling tools in the machining industry";
Vortrag: 13th International Conference on Tools ICT 2012, Miskolc, Ungarn; 27.03.2012 - 28.03.2012; in: "Proceedings of the 13th International Conference on Tools ICT 2012", (2012), ISBN: 978-963-9988-35-4; S. 271 - 276.

Zusätzliche Informationen

M.N. Durakbasa, G. Bas, L. Kräuter, G. Poszvek:
"The Assessment of Industrial Manufacturing Systems Towards Advanced Operations by Means of Integrated Modeling Approach";
Vortrag: International Business Information Management Association Conference (IBIMA), Wien, Österreich; 27.06.2013 - 28.06.2013; in: "Vision 2020: Innovation, Development Sustainability, and Economic Growth, Proceedings of the 21st International Business Information Management Association Conference (IBIMA", (2013), ISBN: 978-0-9860419-0-7; Paper-Nr. 1418-1426, 9 S.

Zusätzliche Informationen

M.N. Durakbasa, G. Bas, Z. Özkan:
"A Proposal Of Methodology For The Strategy And Implementation Of Energy Management Within The Integrated Management Systems";
Vortrag: 16th World Productivity Congress and European Productivity Conference, Antalya, Türkei; 02.11.2010 - 05.11.2010; in: "16th World Productivity Congress and European Productivity Conference", MPM National Productivity Centre of Türkiye - WCPS World Confederation of Productivity Science, (2010), 5 S.

M.N. Durakbasa, G. Bas, P.H. Osanna, J.M. Bauer:
"Sustainable Management Systems of Quality, Energy and Environment in Industry";
Vortrag: 1st International Conference Quality and Innovation in Engineering and Management, Cluj-Napoca, RO; 17.03.2011 - 19.03.2011; in: "QIEM", U.T. Press, 1, Cluj - Napoca (2011), ISBN: 978-973-662-614-2; S. 67 - 70.

M.N. Durakbasa, G. Bas, D. Riepl, J.M. Bauer:
"An Innovative Educational Concept of Teleworking in the High Precision Metrology Laboratory to Develop a Model of Implementation in the Advanced Manufacturing Industry";
Vortrag: 2015 12th International Conference on Remote Engineering and Virtual Instrumentation (REV), Bangkok, Thailand; 25.02.2015 - 28.02.2015; in: "IEEE Conference Publications", IEEE, (2015), ISBN: 978-1-4799-7838-0; Paper-Nr. DOI: 10.1109/REV.2015.7087288, 7 S.

Zusätzliche Informationen

M.N. Durakbasa, J.M. Bauer, G. Bas:
"A Sophisticated Approach to Advanced Production Engineering - Integrated Management for Sustainable Development";
Hauptvortrag: Proceedings of ICPR-AEM and QIEM 2014 Conference, Cluj-Napoca, Rumänien (eingeladen); 01.07.2014 - 05.07.2014; in: "2014 INTERNATIONAL CONFERENCE ON PRODUCTION RESEARCH - REGIONAL CONFERENCE AFRICA, EUROPE AND THE MIDDLE EAST and 3rd INTERNATIONAL CONFERENCE ON QUALITY AND INNOVATION IN ENGINEERING AND MANAGEMENT", Technical University of Cluj- Napoca (2014), ISBN: 978-973-662-978-5; 5 S.

Zusätzliche Informationen

M.N. Durakbasa, J.M. Bauer, G. Bas:
"Developments in High Precision Metrology for Advanced Manufacturing";
Hauptvortrag: Manufacturing Engineering and Management, Presov, Slovak Republic (eingeladen); 05.12.2012 - 07.12.2012; in: "Proceedings of 2nd International Conference on MANUFACTURING ENGINEERING & MANAGEMENT 2012", S. Hloch et al. (Hrg.); FVT TU in Kosice with a seat in Presov, STEVEPRESS, Ltd., Presov, Slovak Republic (2012), 978‐80‐553‐1216‐3; S. 210 - 215.

Zusätzliche Informationen

M.N. Durakbasa, J.M. Bauer, G. Bas, G. Poszvek:
"Novel Trends In The Development Of Micro- And Nano- Manufacturing Based On Integrated Management Systems";
Hauptvortrag: The Third International Conference "MECHANICAL ENGINEERING IN XXI CENTURY", Nis, Serbia (eingeladen); 17.09.2015 - 18.09.2015; in: "Mechanical Engineering in XXI Century", V. Nikolic, D. Milcic (Hrg.); Unigraf, (2015), S. 327 - 330.

M.N. Durakbasa, J.M. Bauer, L. Kräuter, G. Bas:
"Novel Developments In Advanced Manufacturing And Multi Functional Intelligent Factories (mfif) Towards Production In The Future - Challenges Of Autonomation In Industry 4.0";
Hauptvortrag: 2016 INTERNATIONAL CONFERENCE ON PRODUCTION RESEARCH REGIONAL CONFERENCE AFRICA, EUROPE AND THE MIDDLE EAST and 4th INTERNATIONAL CONFERENCE ON QUALITY AND INNOVATION IN ENGINEERING AND MANAGEMENT, Cluj Napoca, Rumänien (eingeladen); 25.07.2016 - 30.07.2016; in: "PROCEEDINGS Capturing Dynamics of Production Networks: Combining Agility, Innovation and Quality", D. Popescu et al. (Hrg.); Technical University Of Cluj-Napoca, 1 / Cluj-Napoca, Romania (2016), ISBN: 978-606-737-180-2; S. 388 - 394.

M.N. Durakbasa, I. Bogrekci, P. Demircioglu, G. Bas, A. Günay:
"Characterization Of The Surface Roughness By Precision Measurements And Image Processing On Machined Metal Surfaces Of Milling Cutters";
Vortrag: Metrology in Production Engineering, Warschau - Pultusk, PL; 12.09.2011 - 14.09.2011; in: "Metrology in Production Engineering", (2011), S. 52 - 57.

M.N. Durakbasa, P. Demircioglu, G. Bas:
"High-Accuracy Measurement And Evaluation Of The Surface Structures Machined In Micro/nano Scale By Tactile And 3d Optical Systems";
Hauptvortrag: 10th International Scientific Conference "Coordinate Measuring Technique CMT", Bielsko Biala (eingeladen); 23.04.2012 - 25.04.2012; in: "10th International Scientific Conference "Coordinate Measuring Technique CMT"", Bielsko Biala, 1 (2012), 12 S.

M.N. Durakbasa, P. Demircioglu, G. Bas, W. Pirker:
"Micro-examination of Dental Samples to Enable the Quality Characteristics Required by the Clinical Experience using Biomedical Metrology";
Vortrag: XXVI. microCAD International Scientific Conference, Miskolc, Hungary; 29.03.2012 - 30.03.2012; in: "The Publications of the XXVI. microCAD", (2012), ISBN: 978-963-661-773-8; 7 S.

Zusätzliche Informationen

M.N. Durakbasa, L. Mukhametzianova, G. Bas, E. Güclü:
"The Role of MMS in an Integrated Management for Improving Production Efficiency and Quality. M.N. Durakbasa";
Vortrag: International Business Information Management Association Conference (IBIMA), Wien; 27.06.2013 - 28.06.2013; in: "Vision 2020: Innovation, Development Sustainability, and Economic Growth, Proceedings of the 21st International Business Information Management Association Conference (IBIMA)", (2013), ISBN: 978-0-9860419-0-7; Paper-Nr. 1385-1393, 9 S.

Zusätzliche Informationen

M.N. Durakbasa, P.H. Osanna, G. Bas:
"Advanced Management Systems for Quality, Energy and Environment for Efficiency Enhancement of Modern Manufacturing Industries";
Hauptvortrag: International Convention On Quality 2012 With The Motto Quality For European And World Integrations, Belgrade (eingeladen); 05.06.2012 - 07.06.2012; in: "International Convention On Quality 2012", V. Majstorovic (Hrg.); UASQ United Association of Serbia for Quality, 1 (2012), ISBN: 978-86903197-9-4; Paper-Nr. rad03, 8 S.

M.N. Durakbasa, P.H. Osanna, A. Hornikova, M. Cakmakci, G. Bas, P. Demircioglu:
"Production Engineering On The Basis Of Precision Metrology And Intelligent Tolerancing";
Hauptvortrag: Metrology in Production Engineering, Warschau - Pultusk, PL (eingeladen); 12.09.2011 - 14.09.2011; in: "Metrology in Production Engineering", (2011), S. 46 - 51.

M.N. Durakbasa, W. Pirker, P.H. Osanna, P. Demircioglu, G. Bas, B. Gültekin:
"Application Of Advanced Production Metrology For Quality Improvements In Biomedical Engineering - Analysis And Evaluation Of Surface Structures Of Dental Implants";
Vortrag: 14 Joint International IMEKO TC1+TC7 TC13 th + Symposium, Jena, Germany; 31.08.2011 - 02.09.2011; in: "Intelligent Quality Measurements - Theory, Education and Training", (2011), Paper-Nr. urn:nbn:de:gbv:ilm1-2011imeko-085:3, 5 S.

M.N. Durakbasa, G. Poszvek, G. Bas, J.M. Bauer:
"Developments In Precision Engineering: High Precision Metrology Applications To Improve Efficiency And Quality";
Vortrag: XXI IMEKO World Congress, Prague; 30.08.2015 - 04.09.2015; in: "XXI IMEKOO World Congress - Full Papers", 1 (2015), ISBN: 978-80-01-05793-3; 4 S.

Zusätzliche Informationen

M.N. Durakbasa, A. Weckenmann, G. Bas:
"An Integrated and Systematic Method of Metrology for Efficiency, Quality and Functionality Improvement in Precision Manufacturing";
Vortrag: 8th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, Aydin TR (eingeladen); 18.06.2015 - 21.06.2015; in: "Diemold 2015", M. Akkök, E. Budak, M. Firat, B. Kaftanoglu (Hrg.); Mechanical Design and Production Society (MATIM), (2015), Paper-Nr. MF 3 (DM 39), 8 S.

Zusätzliche Informationen

M. Erol, M. Yurddaskal, S. Yildirim, O. Mermer, G. Bas, M. Cakmakci, M.N. Durakbasa, E. Celik:
"Nanometric measurement of the pre nano scale tio2 powders via flame spray pyrolysis: synthesis, properties and photocatalytical decomposition of methylen blue";
Vortrag: IMEKO XX World Congress International Measurement Confederation, Busan, Korea; 09.09.2012 - 14.09.2012; in: "IMEKO XX World Congress International Measurement Confederatio", (2012), ISBN: 978-89-950000-5-2; 6 S.

Zusätzliche Informationen

A. Hornikova, G. Bas, B. Sagbas, M.N. Durakbasa:
"Contributing With Design Of Experiment Theory To Quality";
Vortrag: 1st International Conference Quality and Innovation in Engineering and Management, Cluj-Napoca, RO; 17.03.2011 - 19.03.2011; in: "QIEM", S. Popescu, S. Brad, D. Popescu (Hrg.); U.T. Press, 1, Cluj - Napoca (2011), ISBN: 978-973-662-614-2; S. 95 - 100.

A. Hornikova, M.N. Durakbasa, E. Güclü, G. Bas:
"Data Mining - Novel Statistical Method";
Vortrag: 8th International Conference on Measurement, Smolenice, Slovakia; 27.04.2011 - 30.04.2011; in: "Measurement 2011", VEDA, Bratislava, Slovakia (2011), ISBN: 978-80-969-672-4-7; S. 12 - 15.

K. Yaghmaei, G. Bas, M.N. Durakbasa:
"Computational Modeling Of Mechanical Properties Carbon Nanotubereinforced Hydroxyapatite Nanocomposite By Means Of Mechanical Nanometrology";
Vortrag: IMEKO XXI World Congress, Prague; 30.08.2015 - 04.09.2015; in: "XXI IMEKO World Congress - Full Papers", Issue 1 (2015), ISBN: 978-80-01-05793-3; 5 S.

Zusätzliche Informationen


Vorträge und Posterpräsentationen (ohne Tagungsband-Eintrag)


J.M. Bauer, M.N. Durakbasa, G. Bas:
"Multi Functional Intelligent Measurement Robot, As a Part of a Global Quality Management System for Collaboration Between Small, Medium and Large Scale Enterprises";
Vortrag: QIEM 2nd International Conference on Quality and Innovation in Engineering and Management, Cluj-Napoca; 22.11.2012 - 24.11.2012.

Zusätzliche Informationen

C. Davutoglu, M.N. Durakbasa, E. Güclü, G. Bas:
"Improved Quality and Reliability in Telecommunication Network Testing by means of a Remote Online Test System";
Vortrag: 11th International Conference on Remote Engineering and Virtual Instrumentation REV2014, Porto, Portugal; 26.02.2014 - 28.02.2014.

Zusätzliche Informationen

M.N. Durakbasa, J.M. Bauer, G. Bas, D. Riepl:
"Micro And Nanometrology Laboratory Applications In Industry And Education By Telepresence And Teleoperation Remotely In The Global Village";
Vortrag: 11th International Conference on Remote Engineering and Virtual Instrumentation REV2014, Porto, Portugal; 26.02.2014 - 28.02.2014.

Zusätzliche Informationen

M.N. Durakbasa, J.M. Bauer, G. Bas, D. Riepl:
"Telepresence and Teleoperation in Work Concept of Multifunctional Intelligent Factories: Experience of Telepresence in the Micro and Nano Metrology Laboratory AuM-TU-Wien";
Vortrag: QIEM 2nd International Conference on Quality and Innovation in Engineering and Management, Cluj-Napoca, RO; 22.11.2012 - 24.11.2012.

Zusätzliche Informationen

M.N. Durakbasa, P.H. Osanna, G. Bas:
"Intelligent Design and Advanced Metrology to Support and Improve Integrated Management Systems for Quality, Environment and Energy in Production Engineering";
Hauptvortrag: QIEM 2nd International Conference on Quality and Innovation in Engineering and Management, Cluj-Napoca, RO (eingeladen); 22.11.2012 - 24.11.2012.


Dissertationen (eigene und begutachtete)


G. Bas:
"Energy management based model in advanced manufacturing industry enabled by nanotechnology";
Betreuer/in(nen), Begutachter/in(nen): M.N. Durakbasa, P. Kopacek, K. Matyas; Institut für Fertigungstechnik und Hochleistungslasertechnik, 2013; Rigorosum: 05/2013.