TU Home
Diese Publikationsliste wurde automatisch aus den Publikationsdaten der Fakultät für Bauingenieurwesen erstellt. Wenn Sie komplexere Suchabfragen vornehmen wollen, rufen Sie bitte die Seite "Publikationen der Fakultät" direkt auf, oder verwenden Sie die globale Suchfunktion der Publikationsdatenbank der Technischen Universität Wien!


Publikationsdatenbank Home  

Publikationsliste für
Josef Eberhardsteiner
E202 - Institut für Mechanik der Werkstoffe und Strukturen
als Autorin / Autor bzw. wesentlich beteiligte Person

677 Datensätze (1982 - 2022)

Die Publikationen der Fakultät für Bauingenieurwesen sind erst ab dem Jahr 2002 vollzählig in der Publikationsdatenbank enthalten. Publikationen aus den Jahren vor 2002 können, müssen aber nicht in der Datenbank vorhanden sein.


Bücher und Buch-Herausgaben


E. Aigner, R. Blab, J. Eberhardsteiner, J. Füssl, E. Hauser, M. Hoffmann, B. Hofko, A. Jäger, K. Kappl, R. Lackner, M. Spiegl, K. Stangl, M. Wagner, M. Wistuba (Hrg.):
"Funktionale Charakterisierung von Asphalt - Von den wissenschaftlichen Grundlagen zur baupraktischen Anwendung";
Professur für Straßen- und Flugbetriebsflächenbau, Wien, 2009, ISBN: 9783901912221; 100 S.

T. Bednar, J. Eberhardsteiner, R. Fritzenwallner, M. Neusser, H. Weinhardt (Hrg.):
"Zur Energieträgerverbrauchsprognose großer, heterogener Gebäudebestände. Grundlagen - Potentiale - Vorgehensweisen";
Verlag der Österreichischen Akademie der Wissenschaften, Wien, 2015, ISBN: 978-3-7001-7838-5; 124 S.

R. Beer, J. Eberhardsteiner (Hrg.):
"Proceedings of the 11th Danubia-Adria Symposium on Experimental Methods in Solid Mechanics";
Institute for Strength of Materials, Vienna University of Technology, Baden, Austria, 1994.

R. Beer, J. Eberhardsteiner (Hrg.):
"Proceedings of the 18th Danubia-Adria Symposium on Experimental Methods in Solid Mechanics";
Institute for Strength of Materials, Vienna University of Technology, Steyr, Austria, 2001.

R. Blab, J. Eberhardsteiner (Hrg.):
"Methoden der Strukturoptimierung flexibler Straßenbefestigungen. Tätigkeitsbericht des Christian Doppler Labors 2006 bis 2007";
Institut für Straßenbau und Straßenerhaltung, TU Wien, 2007, ISBN: 978-3-901912-18-4; 229 S.

R. Blab, J. Eberhardsteiner (Hrg.):
"Methoden der Strukturoptimierung flexibler Straßenbefstigungen, mit Beiträgen von R. Lackner, M.Spiegl, M. Wistuba, A. Jäger, K. Stangl, K. Kappl, B. Gagliano, E. Aigner, C. Eisenmenger-Sittner";
Institut für Straßenbau und Straßenerhaltung, TU Wien, Wien, 2005, ISBN: 3-901912-17-7; 371 S.

J. Eberhardsteiner (Hrg.):
"Die Wissenschaftskommission beim BMLV, Funktionsperiode 2017-2022, Verteidigungsforschung - Verteidigung forschen, Sinne, Intelligenz und Technologie im 21. Jahrhundert";
Heeresdruckzentrum, 1030 Wien, 2022, ISBN: 978-3-903359-34-5; 316 S.

J. Eberhardsteiner:
"Mechanisches Verhalten von Fichtenholz - Experimentelle Bestimmung der biaxialen Festigkeitseigenschaften";
Springer, Wien, 2002, ISBN: 3-211-83763-9; 174 S.

J. Eberhardsteiner:
"Mechanisches Verhalten von Fichtenholz. Experimentelle Bestimmung der biaxialen Festigkeitseigenschaften (in russischer Sprache übersetzt)";
Belarus National Technical University, Minsk, 2010, ISBN: 978-985-525-563-6.

J. Eberhardsteiner, G. Beer, Ch. Hellmich, H.A. Mang, G. Meschke, W. Schubert (Hrg.):
"Book of Abstracts EURO:TUN 2007 ECCOMAS Thematic Conference on Computational Methods in Tunneling";
Eigenverlag, 2007, ISBN: 3-9501554-6-5.

J. Eberhardsteiner, G. Beer, Ch. Hellmich, H.A. Mang, G. Meschke, W. Schubert (Hrg.):
"CD-ROM Proceedings of EURO:TUN 2007 ECCOMAS Thematic Conference on Computational Methods in Tunnelling";
Eigenverlag, 2007, ISBN: 978-3-9501554-7-1.

J. Eberhardsteiner, H. J. Böhm, F. G. Rammerstorfer (Hrg.):
"CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)";
Vienna University of Technology, Wien, 2012, ISBN: 978-3-9502481-9-7.

J. Eberhardsteiner, H. J. Böhm, Franz Rammerstorfer (Hrg.):
"Book of Abstracts of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)";
Vienna University of Technology, Wien, 2012, ISBN: 978-3-9502481-8-0; 447 S.

J. Eberhardsteiner, Ch. Hellmich, H.A. Mang, J. Periaux (Hrg.):
"ECCOMAS Multidisciplinary Jubilee Symposium - New Computational Challenges in Materials, Structures, and Fluids";
Springer Verlag, 2009, ISBN: 978-1-4020-9230-5; 358 S.

J. Eberhardsteiner, S. Leonovich, Y. Zaytsev:
"Strength and Crack Resistance of Structural Building Materials under Complex Stress Conditions (in russischer Sprache)";
Belarussian National Technical University, Minsk, 2013, ISBN: 978-985-550-148-1; 522 S.

J. Eberhardsteiner, H.A. Mang, H. Waubke (Hrg.):
"CD-ROM Proceedings of the Thirteenth International Congress on Sound and Vibration (ICSV13)";
Vienna University of Technology, 2006, ISBN: 3-95-01554-5-7.

J. Eberhardsteiner, H.A. Mang, H. Waubke (Hrg.):
"Programme & Book of Abstracts of the Thirteenth International Congress on Sound and Vibration (ICSV13)";
Vienna University of Technology, 2006, ISBN: 3-95-01554-4-9; 230 S.

J. Eberhardsteiner, G. Meschke, H.A. Mang:
"Triaxiales konstitutives Modellieren von Beton zum Zwecke der Durchführung vergleichender Traglastanalysen dickwandiger Stahlbetonkonstruktionen mittels der Methode der Finiten Elemente - Abschlussbericht über das vom Fonds zur Förderung der wissenschaftlichen Forschung geförderte Projekt P5161";
TU Wien, Wien, Austria, 1987, 187 S.

J. Eberhardsteiner, W. Winter, A. Fadai, M. Pöll (Hrg.):
"CD-ROM Proceedings of the World Conference on Timber Engineering (WCTE 2016)";
Grafisches Zentrum HTU GmbH, Vienna, 2016, ISBN: 978-3-903039-00-1.

J. Eberhardsteiner, W. Winter, A. Fadai, M. Pöll:
"e-Book of the World Conference on Timber Engineering (WCTE 2016)";
TU Verlag, Wien, 2016, ISBN: 9783903024359; 6301 S.

J. Füssl:
"Multiscale Fracture Modeling of Bituminous Mixtures - From Fatique Behavior to Ultimate Strength Properties of Asphalt Concrete";
in Buchreihe "Mitteilungen der Professur für Straßen- und Flugbetriebsflächenbau, TU Wien", Buchreihen-Herausgeber: R. Blab, J. Eberhardsteiner; Institut für Verkehrswissenschaften, Forschungsbereich für Verkehrsplanung und Verkehrstechnik, Technische Universität Wien, Wien, 2011, ISBN: 978-3-901912-26-9, 119 S.

G. Hofstetter, K. Bergmeister, J. Eberhardsteiner, G. Meschke, H. Schweiger (Hrg.):
"Proceedings of the IV International Conference on Computational Methods in Tunneling and Subsurface Engineering (EURO:TUN 2017)";
Leopold-Franzens-Universität Innsbruck, Innsbruck, 2017, ISBN: 978-3-903030-35-0; 795 S.

A. Jäger:
"Characterization of Viscoelastic Properties of Bitumen by Means of Nanoindentation as Basis for Multiscale Modeling of Asphalt";
in Buchreihe "Mitteilungen des Instituts für Straßenbau und Straßenerhaltung Technische Universität Wien (ISTU), Heft Nr. 21", Buchreihen-Herausgeber: R. Blab, J. Eberhardsteiner; herausgegeben von: Institut für Straßenbau und Straßenerhaltung; Institut für Straßenbau und Straßenerhaltung, TU Wien, Wien, 2008, ISBN: 978-3-901912-21-4, 83 S.

M. Kaliske, J. Eberhardsteiner (Hrg.):
"EUROMECH Colloquium 556 on Theoretical, Numerical, and Experimental Analyses in Wood Mechanics";
Technische Universität Dresden, 2015, ISBN: 978-3-00-049643-1; 89 S.

K. Kappl:
"Bewertung und Modellierung des Verformungsverhaltens von Asphalten mit Hilfe von zyklischen Triaxialprüfungen";
in Buchreihe "Mitteilungen des Instituts für Straßenbau und Straßenerhaltung Technische Universität Wien (ISTU)", Buchreihen-Herausgeber: R. Blab, J. Eberhardsteiner; Institut für Straßenbau und Straßenerhaltung, TU Wien, Wien, 2008, ISBN: 978-3-901912-20-7, 266 S.

R. Lackner, Ch. Pichler, Ch. Brandstätter, L. Martak, H. Liebsch, J. Eberhardsteiner, H.A. Mang (Hrg.):
"Computer-Aided Assessment of Ground Improvement by Means of Jet Grouting (Schriftenreihe "Straßenforschung", Heft 549)";
Bundesministerium für Verkehr, Innovation und Technologie, 2005, ISSN: 0379-1491; 53 S.

R. Lackner, M. Zeiml, D. Leithner, G. Ferner, J. Eberhardsteiner, H.A. Mang (Hrg.):
"Feuerlastinduziertes Abplatzverhalten von Beton in Hohlraumbauten (Spalling Behavior of Concrete in Underground Facilities Caused by Fire Load) (Projektbericht 9)";
Verlag der Österreichischen Akademie der Wissenschaften, Wien, 2007, ISBN: 978-3-7001-3841-9; 103 S.

H.A. Mang, J. Eberhardsteiner, Ch. Hellmich (Hrg.):
"Book of Abstracts of the ECCOMAS Multidisciplinary Jubilee Symposium - New Computational Challenges in Materials, Structures, and Fluids (EMJS08)";
Vienna University of Technology, 2008, ISBN: 978-3-9501554-8-8; 114 S.

H.A. Mang, F. G. Rammerstorfer, J. Eberhardsteiner (Hrg.):
"Book of Abstracts of the Fifth World Congress on Computational Mechanics (WCCM V)";
TU Wien, Wien, Austria, 2002, ISBN: 3-9501554-1-4; 1490 S.

H.A. Mang, F. G. Rammerstorfer, J. Eberhardsteiner (Hrg.):
"Proceedings of the Fifth World Congress on Computational Mechanics (WCCM V)";
TU Wien, Wien, Austria, 2002, ISBN: 3-9501554-0-6.

G. Meschke, G. Beer, J. Eberhardsteiner, D. Hartmann, M. Thewes (Hrg.):
"Computational Methods in Tunneling - EURO:TUN 2009 Volume 2";
Aedificatio Publishers, 2009, ISBN: 978-3-931681-95-1; 506 S.

G. Meschke, G. Beer, J. Eberhardsteiner, D. Hartmann, M. Thewes (Hrg.):
"Computational Methods in Tunnelling - EURO:TUN 2009 Volume 1";
Aedificatio Publishers, 2009, ISBN: 978-3-931681-94-4; 568 S.

G. Meschke, J. Eberhardsteiner, T. Schanz, K. Soga, M. Thewes (Hrg.):
"Computational Methods in Tunneling and Subsurface Engineering - EURO:TUN 2013";
Aedificatio Publishers, 2013, ISBN: 978-3-942052-01-6; 926 S.

R. Schneider-Lauscher, J. Eberhardsteiner:
"Die Fakultät für Bauingeneiurwesen/The Faculty of Civil Engineering: Zukunft gestalten - Bestand erhalten/Shaping the Future - Conserving the Present, Band 6";
in Buchreihe "Technik für Menschen - 200 Jahre Technische Universität Wien", Buchreihen-Herausgeber: S. Seidler; Böhlau Verlag, 2015, ISBN: 978-3-205-20112-0, 156 S.

M. Spiegl:
"Tieftemperaturverhalten von bituminösen Baustoffen - Labortecnische Ansprache und numerische Simulation des Gebrauchsverhaltens";
in Buchreihe "Mitteilungen des Instituts für Straßenbau und Straßenerhaltung Technische Univeristät Wien (ISTU)", Buchreihen-Herausgeber: R. Blab, J. Eberhardsteiner; Institut für Straßenbau und Straßenerhaltung, TU Wien, Wien, 2008, ISBN: 978-3-901912-19-1, 242 S.

A. Teischinger, J. Eberhardsteiner:
"DokIn'Holz - Doktoratsinitiative Holz - Mehrwertstoff mit Zukunft";
in Buchreihe "LIGNOVISIONEN", Buchreihen-Herausgeber: A. Teischinger; herausgegeben von: Schriftenreihe des Institutes für Holztechnologie & Nachwachsende Rohstoffe am Department für Materialwissenschaften und Prozesstechnik; Universität für Bodenkultur Wien, Wien, 2017, ISSN: 1681-2808, 66 S.


Zeitschriftenartikel


E. Aigner, R. Lackner, J. Eberhardsteiner:
"Multiscale Viscoelastic-Viscoplastic Model for the Prediction of Permanent Deformation in Flexible Pavements";
International Journal for Multiscale Computational Engineering, 10 (2012), 6; S. 615 - 634.

M. Aminbaghai, M. Dorn, J. Eberhardsteiner, B. Pichler:
"A Matrix-Vector Operation-Based Numerical Solution Method for Linear m-th Order Ordinary Differential Equations: Application to Engineering Problems";
Advances in Applied Mathematics and Mechanics, 5 (2013), 3; S. 269 - 308.

W. Anderl, P. Heuberer, B. Laky, B. Kriegleder, R. Reihsner, J. Eberhardsteiner:
"Superiority of Bridging Techniques with Medial Fixation on Initial Strength";
Knee Surgery, Sports Traumatology, Arthroscopy, 20 (2012), S. 2559 - 2566.

W. Anderl, R. Reihsner, P. Heuberer, B. Kriegleder, J. Eberhardsteiner:
"Comparison of the Stability of Different Arthroscopic Tendon Fixation Techniques in Dynamic Tests";
Strain, 47 (2011), S. 421 - 429.

M. Autengruber, M. Lukacevic, C. Gröstlinger, J. Eberhardsteiner, J. Füssl:
"Numerical Assessment of Wood Moisture Content-Based Assignments to Service Classes in EC5 and a Prediction Concept of Moisture-Induced Stresses Solely Using Relative Humidity Data";
Engineering Structures, 245 (2021), 112849.

T. Bader, K. de Borst, J. Eberhardsteiner:
"Micromechanical Modeling of Common Yew and Norway Spruce";
PAMM - Proceedings in Applied Mathematics and Mechanics, 13 (2013), S. 185 - 186.

T. Bader, J. Eberhardsteiner, K. de Borst:
"Shear Stiffness and its Relation to the Microstructure of 10 European and Tropical Hardwood Species";
Wood Material Science and Engineering, 12 (2017), 2; S. 82 - 91.

T. Bader, K. Hofstetter, J. Eberhardsteiner, D. Keunecke:
"Microstructure-Stiffness Relationships of Common Yew and Norway Spruce";
Strain, 48 (2012), S. 306 - 316.

T. Bader, K. Hofstetter, Ch. Hellmich, J. Eberhardsteiner:
"Poromechanical Scale Transitions of Failure Stresses in Wood: From the Lignin to the Spruce Level";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, 90 (2010), 10-11; S. 750 - 767.

T. Bader, K. Hofstetter, Ch. Hellmich, J. Eberhardsteiner:
"The Poroelastic Role of Water in Cell Walls of the Hierarchical Composite 'Softwood'";
Acta Mechanica, 217 (2011), S. 75 - 100.

T. Bader, M. Schweigler, G. Hochreiner, J. Eberhardsteiner:
"Ingenieurmodelle für die Strukturmodellierung und Nachweisführung von stiftförmigen Verbindungen im Holzbau";
ÖIAZ - Österreichische Ingenieur- und Architektenzeitschrift, 162 (2017), Heft 1-12; S. 25 - 33.

G. Balduzzi, M. Aminbaghai, E. Sacco, J. Füssl, J. Eberhardsteiner, F. Auricchio:
"Non-Prismatic Beams: a Simple and Effective Timoshenko-Like Model";
International Journal of Solids and Structures, 90 (2016), S. 236 - 250.

R. Beer, J. Eberhardsteiner, J. Kodvanj, W. Grienauer, F. Gottsauner-Wolf, G. Skrbensky:
"Mechanical and Medical Aspects of an Implant-Bone Connection in the Femur: A Three-Dimensional Photoelastic Study of the Load Transfer Mechanism Using Gamma Radiation for Fixing the Experimental Information";
Acta of Bioengineering and Biomechanics, 2 (2000), 2; S. 25 - 32.

R. Beer, J. Eberhardsteiner, F. Pulay, R. Reihsner:
"Zweiachsiges Testen anisotroper Werkstoffe - Konstruktion geeigneter Prüfmaschinen";
ÖIAZ - Österreichische Ingenieur- und Architektenzeitschrift, 137 (1992), 11; S. 544 - 549.

T. Brynk, Ch. Hellmich, A. Fritsch, P.K. Zysset, J. Eberhardsteiner:
"Experimental Poromechanics of Trabecular Bone Strength: Role of Terzaghi's Effective Stress and of Tissue Level Stress Fluctuations";
Journal of Biomechanics, 44 (2011), S. 501 - 508.

K. de Borst, C. Jenkel, C. Montero, J. Colmars, J. Gril, M. Kaliske, J. Eberhardsteiner:
"Mechanical Characterization of Wood - An Integrative Approach Ranging from Nanoscale to Structure";
Computers and Structures, 127 (2013), S. 53 - 67.

M. Dorn, K. de Borst, J. Eberhardsteiner:
"Experiments on Dowel-Type Timber Connections";
Engineering Structures, 47 (2013), S. 67 - 80.

J. Eberhardsteiner:
"Biaxial Testing of Orthotropic Materials Using Electronic Speckle Pattern Interferometry";
Measurement, 16 (1995), S. 139 - 148.

J. Eberhardsteiner:
"Editorial";
Strain, 42 (2006), 3; S. 133 - 134.

J. Eberhardsteiner, H. J. Böhm, F. G. Rammerstorfer, H.A. Mang, M. Pöll:
"ECCOMAS 2012 - Sixth European Congress on Computational Methods in Applied Sciences and Engineering";
Computer Assisted Methods in Engineering and Science, 19 (2012), S. 305 - 308.

J. Eberhardsteiner, W. Fidi, W. Liederer:
"Experimentelle Bestimmung der adhäsiven Reibeigenschaften von Gummiproben auf ebenen Oberflächen";
Kautschuk Gummi Kunststoffe, 51 (1998), 11; S. 773 - 781.

J. Eberhardsteiner, M. Gingerl, H.A. Mang:
"Fehlereinflüsse bei der Anwendung eines 3D-Speckle-Inferometers im Rahmen biaxialer Werkstoffversuche";
ÖIAZ - Österreichische Ingenieur- und Architektenzeitschrift, 143 (1998), 5; S. 222 - 225.

J. Eberhardsteiner, M. Gingerl, L. Ondris:
"Form- und Beanspruchungsoptimierung eines Holzprobekörpers für biaxiale Werkstoffprüfungen mittels numerischer Analysen";
Projekte an den zentralen Applikationsservern des Zentralen Informatikdienstes der Technischen Universität Wien, Berichte 1997 (1997), S. 133 - 139.

J. Eberhardsteiner, M. Gingerl, L. Ondris, R. Beer:
"Experimental Investigation of the Strength of Anisotropic Solids Under Biaxial Loading Oblique to the Principal Material Direction";
Communications, 3 (2000), S. 4 - 7.

J. Eberhardsteiner, G. Hofstetter, C. Kropik, H.A. Mang:
"Dreidimensionale, elasto-viskoplastische, hybride BE-FEM Analyse der beim Tunnelvortrieb entstehenden Deformationen und Spannungen";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, 74 (1994), S. T502 - T504.

J. Eberhardsteiner, G. Hofstetter, G. Meschke:
"Editorial";
Engineering Structures, 47 (2013), S. 1.

J. Eberhardsteiner, G. Hofstetter, G. Meschke, P. Mackenzie-Helnwein:
"Coupled Material Modelling and Multifield Structural Analyses in Civil Engineering";
Engineering Computations, 20 (2003), 5/6; S. 524 - 558.

J. Eberhardsteiner, H.A. Mang:
"Biaxiale Festigkeitseigenschaften von Fichtenholz";
Österreichische Hochschulzeitung, 44 (1992), 9; S. 15 - 16.

J. Eberhardsteiner, H.A. Mang:
"Discrete Orthogonalization of Parameter Lines on Curved Surfaces for Finite-Element Analysis of Thin Shells";
International Journal for Numerical Methods in Engineering, 21 (1985), S. 837 - 851.

J. Eberhardsteiner, H.A. Mang:
"Foreword";
Acta Geotechnica, 3 (2008), S. 249.

J. Eberhardsteiner, H.A. Mang:
"The Thirteenth International Congress on Sound and Vibration";
International Journal of Acoustics and Vibration, 11 (2006), 2.

J. Eberhardsteiner, H.A. Mang:
"Vergleichendes konstitutives Modellieren dreiachsial beanspruchten Betons auf der Grundlage nichtlinear-elastischer Stoffgesetze";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, 68 (1988), S. T167 - T169.

J. Eberhardsteiner, H.A. Mang:
"Zur statischen Beanspruchung von Dükern in Doppelrohrstrecken von Ölfernleitungen";
Der Bauingenieur, 60 (1985), S. 191 - 196.

J. Eberhardsteiner, H.A. Mang, F. Pulay:
"Zur Frage der Lasteinleitung bei experimentellen Festigkeitsuntersuchungen von zweiaxial beanspruchtem Holz";
ÖIAZ - Österreichische Ingenieur- und Architektenzeitschrift, 136 (1991), 6; S. 265 - 272.

J. Eberhardsteiner, H.A. Mang, F. G. Rammerstorfer:
"Preface: Special Issue on The Fifth World Congress on Computational Mechanics";
International Journal for Numerical Methods in Engineering, 60 (2004), 1; S. 1 - 2.

J. Eberhardsteiner, H.A. Mang, P. Torzicky:
"Festigkeitslehre reduziert Kosten";
Technik, Mensch und Umwelt. TU Wien, Sonderdruck aus Österr. Hochschulzeitung, 37 (1985), 6; S. 10 - 11.

J. Eberhardsteiner, H.A. Mang, P. Torzicky:
"Zur Biegestörung in den Endverschlüssen des Schutzrohres einer Pipeline-Doppelrohrstrecke";
Der Stahlbau, 54 (1985), S. 289 - 295.

J. Eberhardsteiner, H.A. Mang, P. Torzicky, P. Rödhammer:
"Thermo-Visco-Elasto-Plastic FE Analysis of a Composite X-Ray Rotary Anode under Cyclic Thermal Loading";
International Journal of Refractory Metals & Hard Materials, 10 (1991), 3; S. 147 - 154.

J. Eberhardsteiner, S. Zhdanok, B. Khroustalev, E. Batsianouski, S. Leonovich, P. Samtsou:
"Characterization of the Influence of Carbon Nanomaterials on the Mechanical Behavior of Cement Stone";
Journal of Engineering Physics and Thermophysics, 84 (2011), 4; S. 753 - 760.

J. Eberhardsteiner, S. Zhdanok, B. Khroustalev, S. Leonovich, P. Samtsou:
"Study of the Influence of Nano-Size Additives on the Mechanical Behavior of Cement Stone";
International Science & Technique Journal, 1 (2012), S. 52 - 55.

M. Fleischmann, J. Eberhardsteiner, H.A. Mang:
"Identifikation von Materialparametern für ein elasto-plastisches Materialmodell für Fichtenholz";
PAMM - Proceedings in Applied Mathematics and Mechanics, 4 (2004), 1; S. 394 - 395.

M. Fleischmann, P. Helnwein, J. Eberhardsteiner:
"Experimentelle Untersuchung des mechanischen Verhaltens von astfreiem Fichtenholz in radialer und tangentialer Richtung des Stamms";
PAMM - Proceedings in Applied Mathematics and Mechanics, 2 (2003), 1; S. 274 - 275.

M. Fleischmann, H. Krenn, J. Eberhardsteiner, G. Schickhofer:
"Numerische Berechnung von Holzkonstruktionen unter Verwendung eines orthotropen elasto-plastischen Werkstoffmodells";
Holz als Roh- und Werkstoff, 65 (2007), 4; S. 301 - 313.

J. Füssl, T. Bader, J. Eberhardsteiner:
"Computational Mechanics for Advanced Timber Engineering";
IACM Expressions, 32 (2012), S. 6 - 11.

J. Füssl, G. Kandler, J. Eberhardsteiner:
"Application of Stochastic Finite Approaches to Wood-Based Products";
Archive of Applied Mechanics, 86 (2016), S. 89 - 110.

J. Füssl, R. Lackner, J. Eberhardsteiner:
"Creep Response of Bituminous Mixtures - Rheological Model and Microstructural Interpretation";
Meccanica, 49 (2014), S. 2687 - 2698.

J. Füssl, R. Lackner, J. Eberhardsteiner, H.A. Mang:
"Failure Modes and Effective Strength of Two-Phase Materials Determined by Means of Numerical Limit Analysis";
Acta Mechanica, 195 (2008), 1-4; S. 185 - 202.

J. Füssl, M. Li, M. Lukacevic, J. Eberhardsteiner, C. Martin:
"Comparison of Unit Cell-Based Computational Methods for Predicting the Strength of Wood";
Engineering Structures, 141 (2017), S. 427 - 443.

J. Füssl, M. Lukacevic, G. Kandler, J. Eberhardsteiner:
"A Comprehensive Mechanical Modeling Approach for the Design of Wood-based Products";
IACM Expressions, 35 (2014), S. 8 - 12.

A. Galek, H. Moser, T. Ring, M. Zeiml, J. Eberhardsteiner, R. Lackner:
"Mechanical and Transport Properties of Concrete at High Temperatures";
Applied Mechanics and Materials, Vols. 24-25 (2010), S. 1 - 11.

J. Garab, R. Reihsner, J. Eberhardsteiner:
"Mechanical Behavior of Spruce under Triaxial Compression";
Wood Research, 57 (2012), 1; S. 57 - 68.

T. Gecys, A. Daniunas, T. Bader, L. Wagner, J. Eberhardsteiner:
"3D Finite Element Analysis and Experimental Investigations of a New Type of Timber Beam-to-Beam Connection";
Engineering Structures, 86 (2015), S. 134 - 145.

S. Gloimüller, K. de Borst, T. Bader, J. Eberhardsteiner:
"Determination of the Linear Elastic Stiffness and Hygroexpansion of Softwood by a Multilayered Unit Cell Using Poromechanics";
Interaction and Multiscale Mechanics, An International Journal, 5 (2012), 3; S. 229 - 265.

P. Godinho, M. Jajcinovic, L. Wagner, V. Vass, W. Fischer, T. Bader, U. Hirn, W. Bauer, J. Eberhardsteiner, Ch. Hellmich:
"A Continuum Micromechanics Approach to the Elasticity and Strength of Planar Fiber Networks: Theory and Application to Paper Sheets";
European Journal of Mechanics - A/Solids, 75 (2019), S. 516 - 531.

Ch. Hellmich, J. Eberhardsteiner:
"Ingenieurmechanik als Schlüssel für technologische Innovationen in Bau- und Bioingenieurwesen: Beton - Holz - Knochen";
ÖIAZ - Österreichische Ingenieur- und Architektenzeitschrift, 161 (2016), Heft 1-12; S. 189 - 193.

G. Hochreiner, T. Bader, K. de Borst, J. Eberhardsteiner:
"Stiftförmige Verbindungsmittel im EC5 und baustatische Modellbildung mittels kommerzieller Statiksoftware";
Bauingenieur, 88 (2013), S. 275 - 289.

G. Hochreiner, T. Bader, M. Schweigler, J. Eberhardsteiner:
"Structural Behavior and Design of Dowel Groups - Experimental and Numerical Identification of Stress States and Failure Mechanisms of the Surrounding Timber Matrix";
Engineering Structures, 131 (2017), S. 421 - 437.

G. Hochreiner, J. Füssl, J. Eberhardsteiner:
"Cross-Laminated Timber Plates Subjected to Concentrated Loading - Experimental Identification of Failure Mechanisms";
Strain, 50 (2014), S. 68 - 81.

G. Hochreiner, J. Füssl, E. Serrano, J. Eberhardsteiner:
"Influence of Wooden Board Strength Class on the Performance of Cross-Laminated Timber Plates Investigated by Means of Full-Field Deformation Measurements";
Strain, 50 (2014), S. 161 - 173.

R. Höller, M. Aminbaghai, L. Eberhardsteiner, J. Eberhardsteiner, R. Blab, B. Pichler, Ch. Hellmich:
"Rigorous Amendment of Vlasov's Theory for Thin Elastic Plates on Elastic Winkler Foundations, Based on the Priniple of Virtual Power";
European Journal of Mechanics - A/Solids, 73 (2019), S. 449 - 482.

K. Hofstetter, J. Eberhardsteiner:
"A Thermo-Mechanically Coupled Formulation for the Frictional Behavior of Rubber";
Projekte an den zentralen Applikationsservern des Zentralen Informatikdienstes der Technischen Universität Wien, Berichte 2002 (2002), S. 140 - 145.

K. Hofstetter, J. Eberhardsteiner:
"Computational Mechanics of Wood and Wooden Composites";
ECCOMAS Newsletter, June (2008), S. 14 - 17.

K. Hofstetter, J. Eberhardsteiner, S. Koch, G. Ernst:
"Numerische Analyse der Beanspruchung von Seilbahneinlageringen";
Kautschuk Gummi Kunststoffe, 59 (2006), 9; S. 459 - 465.

K. Hofstetter, J. Eberhardsteiner, H.A. Mang:
"A Thermo-Mechanical Formulation Describing the Frictional Behavior of Rubber";
PAMM - Proceedings in Applied Mathematics and Mechanics, 2 (2003), 1; S. 238 - 239.

K. Hofstetter, J. Eberhardsteiner, H.A. Mang:
"Efficient Treatment of Rubber Friction Problems in Industrial Applications by Means of the FEM";
Structural Engineering and Mechanics, 22 (2006), 5; S. 517 - 539.

K. Hofstetter, J. Eberhardsteiner, H.A. Mang, S. Del Linz:
"A Thermo-Mechanical Formulation Describing the Frictional Behavior of Rubber";
Vehicle System Dynamics, Supplement, Vol. 40 (2003), S. 195 - 210.

K. Hofstetter, Ch. Grohs, J. Eberhardsteiner, H.A. Mang:
"Sliding Behaviour of Simplified Tire Tread Patterns Investigated by Means of FEM";
Computers and Structures, 84 (2006), 17-18; S. 1151 - 1163.

K. Hofstetter, Ch. Hellmich, J. Eberhardsteiner:
"Continuum Micromechanics Estimation of Wood Strength";
PAMM - Proceedings in Applied Mathematics and Mechanics, 6 (2006), 1; S. 75 - 78.

K. Hofstetter, Ch. Hellmich, J. Eberhardsteiner:
"Development and Experimental Validation of a Continuum Micromechanics Model for the Elasticity of Wood";
European Journal of Mechanics - A/Solids, 24 (2005), 6; S. 1030 - 1053.

K. Hofstetter, Ch. Hellmich, J. Eberhardsteiner:
"Micromechanical Modeling of Solid-Type and Plate-Type Deformation Patterns within Softwood Materials. A review and an Improved Approach";
Holzforschung, 61 (2007), 4; S. 343 - 351.

K. Hofstetter, Ch. Hellmich, J. Eberhardsteiner:
"The Influence of the Microfibril Angle on Wood Stiffness: a Continuum Micromechanics Approach";
Computer Assisted Mechanics and Engineering Sciences, 13 (2006), 4; S. 523 - 536.

K. Hofstetter, Ch. Hellmich, J. Eberhardsteiner, H.A. Mang:
"Micromechanical Estimates for Elastic Limit States in Wood Materials, Revealing Nanostructural Failure Mechanisms";
Mechanics of Advanced Materials and Structures, 15 (2008), 6-7; S. 474 - 484.

T. Huemer, W. Liu, J. Eberhardsteiner, H.A. Mang:
"A 3D Finite Element Formulation of the Friction Behavior of Rubber on Ice and Concrete Surfaces";
Engineering Computations, 18 (2001), 3/4; S. 417 - 436.

T. Huemer, W. Liu, J. Eberhardsteiner, G. Meschke, H.A. Mang:
"Sliding Behavior of Rubber on Snow and Concrete Surfaces";
Kautschuk Gummi Kunststoffe, 9 (2001), S. 458 - 462.

A. Jäger, T. Bader, K. Hofstetter, J. Eberhardsteiner:
"The Relation between Indentation Modulus, Microfibril Angle, and Elastic Properties of Wood Cell Walls";
Composites Part A: Applied Science and Manufacturing, 42 (2011), S. 677 - 685.

A. Jäger, R. Lackner, J. Eberhardsteiner:
"Identification of Viscoelastic Properties by Means of Nanoindentation Taking the Real Tip Geometry into Account";
Meccanica, 42 (2007), 3; S. 293 - 306.

G. Kandler, J. Füssl, J. Eberhardsteiner:
"Stochastic Finite Element Approaches for Wood-Based Products: Theoretical Framework and Review of Methods";
Wood Science and Technology, 49 (2015), S. 1055 - 1097.

G. Kandler, J. Füssl, E. Serrano, J. Eberhardsteiner:
"Effective Stiffness Prediction of GLT Beams Based on Stiffness Distributions of Individual Lamellas";
Wood Science and Technology, 49 (2015), S. 1101 - 1121.

P. Karte, M. Hlobil, R. Reihsner, W. Dörner, O. Lahayne, J. Eberhardsteiner, B. Pichler:
"Unloading-Based Stiffness Characterisation of Cement Pastes During the Second, Third and Fourth Day After Production";
Strain, 51 (2015), S. 156 - 169.

B. Khroustalev, J. Eberhardsteiner, O. Lahayne, S. Leonovich, G. Yakovlev, G. Pervushin:
"Nano-Tests on Concrete Samples with and without Nanotubes";
Science & Technique, 5 (2013), S. 35 - 39.

B. Khroustalev, S. Leonovich, J. Eberhardsteiner, G. Yakovlev, G. Pervushin:
"Influence of Multilayer Nanotubes on Fracture Toughness";
Science & Technique, 4 (2012), S. 52 - 57.

B. Khroustalev, S. Leonovich, G. Yakovlev, I. Polianskich, O. Lahayne, J. Eberhardsteiner, G. Skripkiunas, I. Pudov, E. Karpova:
"Structural Modification of New Formations in Cement Matrix Using Carbon Nanotube Dispersions and Nanosilica";
Science & Technique, 16 (2017), 2; S. 93 - 103.

J. Kodvanj, S. Jecic, R. Beer, J. Eberhardsteiner:
"Photoelastic Investigation of Mechanical Problems in Applying Acetabulum Cups to Hip Prothesis";
Acta of Bioengineering and Biomechanics, 8 (2006), 1; S. 47 - 54.

Ch. Kohlhauser, Ch. Hellmich, C. Vitale-Brovarone, A. Boccaccini, A. Rota, J. Eberhardsteiner:
"Ultrasonic Characterisation of Porous Biomaterials across Different Frequencies";
Strain, 45 (2009), 1; S. 34 - 44.

J. Konnerth, A. Jäger, J. Eberhardsteiner, U. Müller, W. Gindl:
"Elastic Properties of Adhesive Polymers. II: Polymer Films and Bond Lines by Means of Nanoindentation";
Journal of Applied Polymer Science, 102 (2006), 2; S. 1234 - 1239.

R. Lackner, Ch. Pichler, Ch. Brandstätter, L. Martak, H. Liebsch, J. Eberhardsteiner, H.A. Mang:
"Computerbasierte Beurteilung von Bodenverbesserungsmaßnahmen mittels Düsenstrahlverfahren bei Tunnelvortrieben nach dern Neuen Österreichischen Tunnelbaumethode (NÖT)";
FSV aktuell, Dezember (2005).

R. Lackner, M. Spiegl, R. Blab, J. Eberhardsteiner:
"Is Low-Temperature Creep of Asphalt Mastic Independent of Filler Shape and Mineralogy? - Arguments from Multiscale Analysis";
Journal of Materials in Civil Engineering (ASCE), 17 (2005), 5; S. 485 - 491.

O. Lahayne, J. Eberhardsteiner, R. Reihsner:
"Tribological Investigations Carried out by a Linear Friction Tester";
Transactions of FAMENA, 33 (2009), S. 15 - 22.

O. Lahayne, B. Pichler, R. Reihsner, J. Eberhardsteiner, J. Suh, D. Kim, S. Nam, H. Paek, B. Lorenz, B. Persson:
"Rubber Friction on Ice: Experiments and Modeling";
Tribology Letters, 62 (2016), 17.

O. Lahayne, L. Zelaya-Lainez, T. Buchner, J. Eberhardsteiner, J. Füssl:
"Influence of Nanoadditives on the Young's Modulus of Cement";
Materials Today: Proceedings, 62 (2022), S. 2488 - 2494.

W. Lederer, T. Bader, L. Muszynski, J. Eberhardsteiner:
"Exploring a Multi-modal Experimental Approach to Investigation of Local Embedment Behaviour of Wood under Steel Dowels";
Strain, Volume 52 (2016), S. 531 - 547.

W. Lederer, T. Bader, G. Unger, J. Eberhardsteiner:
"Influence of Different Types of Reinforcements on the Embedment Behavior of Steel Dowels in Wood";
European Journal of Wood and Wood Products, Volume 74 (2016), S. 793 - 807.

M. Li, J. Füssl, M. Lukacevic, J. Eberhardsteiner, C. Martin:
"A Numerical Upper Bound Formulation with Sensibly-Arranged Velocity Discontinuities and Orthotropic Material Strength Behaviour";
Journal of Theoretical and Applied Mechanics, 56 (2018), 2; S. 417 - 433.

M. Li, J. Füssl, M. Lukacevic, J. Eberhardsteiner, C. Martin:
"An Algorithm for Adaptive Introduction and Arrangement of Velocity Discontinuities within 3D Finite-Element-Based Upper Bound Limit Analysis Approaches";
Computer Methods in Applied Mechanics and Engineering, 348 (2019), S. 875 - 911.

M. Li, J. Füssl, M. Lukacevic, J. Eberhardsteiner, C. Martin:
"Strength Predictions of Clear Wood at Multiple Scales Using Numerical Limit Analysis Approaches";
Computers and Structures, 196 (2018), S. 200 - 216.

M. Li, J. Füssl, M. Lukacevic, C. Martin, J. Eberhardsteiner:
"Bending Strength Predictions of Cross-Laminated Timber Plates Subjected to Concentrated Loading Using 3D Finite-Element-Based Limit Analysis Approaches";
Composite Structures, 220 (2019), S. 912 - 925.

W. Liu, T. Huemer, J. Eberhardsteiner, H.A. Mang:
"Modified Node-Smoothing Method of Non-Smooth Surfaces in FE Analyses of 2D Contact";
Computers and Structures, 80 (2002), 27-30; S. 2185 - 2193.

K. Luczynski, A. Steiger-Thirsfeld, J. Bernardi, J. Eberhardsteiner, Ch. Hellmich:
"Extracellular Bone Matrix Exhibits Hardening Elastoplasticity and more than Double Cortical Strength: Evidence from Homogeneous Compression of Non-Tapered Single Micron-Sized Pillars Welded to a Rigid Substrate";
Journal of the Mechanical Behavior of Biomedical Materials, 52 (2015), S. 51 - 62.

M. Lukacevic, M. Autengruber, T. Raimer, J. Eberhardsteiner, J. Füssl:
"Effect of Cast-In-Place Concrete Application on Moisture Distribution in Timber-Concrete Composite Floors with Notched Connections, Investigated Via Finite Element Simulations";
Journal of Building Engineering, 42 (2021), 103005.

M. Lukacevic, J. Füssl, J. Eberhardsteiner:
"Discussion of Common and New Indicating Properties for the Strength grading of Wooden Boards";
Wood Science and Technology, 49 (2015), S. 551 - 576.

M. Lukacevic, J. Füssl, J. Eberhardsteiner:
"Eine numerische Methode zur Beschreibung von Holzversagen - von der Holzzelle bis zu Holzprodukten";
ÖIAZ - Österreichische Ingenieur- und Architektenzeitschrift, 162 (2017), S. 17 - 24.

M. Lukacevic, J. Füssl, M. Griessner, J. Eberhardsteiner:
"Performance Assessment of a Numerical Simulation Tool for Wooden Boards with Knots by Means of Full-Field Deformation Measurements";
Strain, 50 (2014), S. 301 - 317.

P. Mackenzie-Helnwein, J. Eberhardsteiner, H.A. Mang:
"A Multi-Surface Plasticity Model for Clear Wood and its Application to the Finite Element Analysis of Structural Details";
Computational Mechanics, 31 (2003), 1-2; S. 204 - 218.

P. Mackenzie-Helnwein, J. Eberhardsteiner, H.A. Mang:
"Rate-Independent Mechanical Behavior of Biaxially Stressed Wood: Experimental Observations and Constitutive Modeling as an Orthotropic Two-Surface Elasto-Plastic Material";
Holzforschung, 59 (2005), S. 311 - 321.

P. Mackenzie-Helnwein, H.W. Müllner, J. Eberhardsteiner, H.A. Mang:
"Analysis of Layered Wooden Shells Using an Orthotropic Elasto-Plastic Model for Multi-Axial Loading of Clear Spruce Wood";
Computer Methods in Applied Mechanics and Engineering, 194 (2005), 21-24; S. 2661 - 2685.

A. Malasoma, A. Fritsch, Ch. Kohlhauser, T. Brynk, Z. Pakiela, J. Eberhardsteiner, Ch. Hellmich:
"Micromechanics of Bioresorbable Porous CEL2 Glass-ceramic Scaffolds for Bone Tissue Engineering";
Advances in Applied Ceramics, 107 (2008), S. 277 - 286.

H.A. Mang, E. Aigner, J. Eberhardsteiner, C. Hackspiel, Ch. Hellmich, K. Hofstetter, R. Lackner, B. Pichler, St. Scheiner, R. Stürzenbecher:
"Computational Multiscale Analysis in Civil Engineering";
Interaction and Multiscale Mechanics, An International Journal (eingeladen), 2 (2009), 2; S. 109 - 128.

H.A. Mang, J. Eberhardsteiner, Ch. Hellmich, K. Hofstetter, A. Jäger, R. Lackner, K. Meinhard, H.W. Müllner, B. Pichler, Ch. Pichler, R. Reihsner, R. Stürzenbecher, M. Zeiml:
"Computational Mechanics of Materials and Structures";
Engineering Structures, 31 (2009), 6; S. 1288 - 1297.

H.A. Mang, J. Eberhardsteiner, R. Lackner, P. Mackenzie-Helnwein, Ch. Pichler:
"Constitutive Modeling and Computational Mechanics of Wood and Cement-Based Materials";
Building Research Journal, 51 (2003), 4; S. 239 - 269.

H.A. Mang, B. Pichler, T. Bader, J. Füssl, X. Jia, A. Fritsch, J. Eberhardsteiner, Ch. Hellmich:
"Quantification of Structural and Material Failure Mechanisms across different Length Scales: From Instability to Brittle-Ductile Transitions";
Acta Mechanica, 223 (2012), S. 1937 - 1957.

F. Müller, J. Eberhardsteiner:
"Biaxiale Festigkeitsprüfung - Zug- und Druckprüfstand der TU Wien für orthotrope Werkstoffe";
Technik Report, 9A (1992), S. 157 - 158.

H.W. Müllner, J. Eberhardsteiner, W. Fidi:
"Rheological Characterization of the Die Swell Phenomenon of Rubber Compounds";
Polymer Testing, 26 (2007), 8; S. 1041 - 1048.

H.W. Müllner, J. Eberhardsteiner, K. Hofstetter:
"Viscosity Characterisation for Rubber Blends from Die Swell Data by Means of a Genetic Algorithm";
PAMM - Proceedings in Applied Mathematics and Mechanics, 6 (2006), 1; S. 575 - 576.

H.W. Müllner, J. Eberhardsteiner, P. Mackenzie-Helnwein:
"Constitutive Characterization of Rubber Blends by Means of Capillary-Viscometry";
Polymer Testing, 28 (2009), S. 13 - 23.

H.W. Müllner, J. Eberhardsteiner, P. Mackenzie-Helnwein:
"Konstitutives Modellieren von Fichtenholz unter biaxialer Beanspruchung mittels eines orthotropen Einflächenmodells unter Berücksichtigung von Ver- und Entfestigung";
PAMM - Proceedings in Applied Mathematics and Mechanics, 4 (2004), 1; S. 264 - 265.

H.W. Müllner, J. Eberhardsteiner, A. Wieczorek:
"Experimental Investigation and Identification of Material Parameters for Rubber Blends";
The Archive of Mechanical Engineering, 53 (2006), 3; S. 263 - 277.

H.W. Müllner, J. Eberhardsteiner, A. Wieczorek:
"Konstitutive Charakterisierung von Kautschukmischungen mit dem Hochdruckkapillarviskosimeter";
PAMM - Proceedings in Applied Mathematics and Mechanics, 5 (2005), 1; S. 507 - 508.

H.W. Müllner, G. Ernst, J. Eberhardsteiner:
"Back-calculation of the Die Swell Phenomenon of Rubber Compounds by Means of Torsional Rheometry";
Journal of Applied Polymer Science, 110 (2008), 1; S. 76 - 82.

H.W. Müllner, M. Fleischmann, J. Eberhardsteiner:
"Orthotropic Single-Surface Plasticity Model for Spruce Wood Including the Effect of Knots";
The Archive of Mechanical Engineering, 52 (2005), 3; S. 253 - 265.

H.W. Müllner, A. Fritsch, Ch. Kohlhauser, R. Reihsner, Ch. Hellmich, D. Godlinski, A. Rota, R. Slesinski, J. Eberhardsteiner:
"Acoustical and Poromechanical Characterization of Titanium Scaffolds for Biomedical Applications";
Strain, 44 (2008), 2; S. 153 - 163.

H.W. Müllner, A. Jäger, E. Aigner, J. Eberhardsteiner:
"Experimental Identification of Viscoelastic Properties of Rubber Compounds by Means of Torsional Rheometry";
Meccanica, 43 (2008), 3; S. 327 - 337.

H.W. Müllner, Ch. Kohlhauser, M. Fleischmann, J. Eberhardsteiner:
"Influence of the Characteristic Length on the Strength Properties of a Material Model for Spruce Wood";
The Archive of Mechanical Engineering, 53 (2006), 3; S. 247 - 262.

H.W. Müllner, A. Wieczorek, J. Eberhardsteiner:
"Experimental Determination of Shear-Thinning Behaviour During Extrusion of Rubber Blends";
Strain, 47 (2011), S. 162 - 172.

H.W. Müllner, A. Wieczorek, W. Fidi, J. Eberhardsteiner:
"Advances in Numerical Prediction of Extrusion Tools Used for Fabrication of Rubber Profiles";
PAMM - Proceedings in Applied Mathematics and Mechanics, 8 (2008), S. 10633 - 10634.

H.W. Müllner, A. Wieczorek, H.A. Mang, J. Eberhardsteiner:
"Back Calculation of the Entrance Pressure of Capillary Dies by Means of Measurements with Slit Dies";
Polymer Testing, 26 (2007), 4; S. 426 - 437.

H.W. Müllner, A. Wieczorek, P.I. Petracek, J. Eberhardsteiner:
"Experimental Validation of a Viscoelastic Material Model for Numerical Simulation of the Extrusion Process of Rubber Blends";
PAMM - Proceedings in Applied Mathematics and Mechanics, 7 (2007), S. 4100027 - 4100028.

T. Müllner, W. Menth-Chiari, R. Reihsner, J. Eberhardsteiner, L. Engebretsen:
"Accuracy of Pressure and Flow Capacities of Four Arthroscopic Fluid Management Systems";
Arthroscopy, 17 (2001), S. 760 - 764.

B. Pichler, Ch. Hellmich, J. Eberhardsteiner:
"Spherical and Acicular Representation of Hydrates in a Micromechanical Model for Cement Paste: Prediction of Early-Age Elasticity and Strength";
Acta Mechanica, 203 (2009), 3-4; S. 137 - 162.

B. Pichler, Ch. Hellmich, J. Eberhardsteiner, H.A. Mang:
"Assessment of Protection Systems for Buried Steel Pipelines Endangered by Rockfall";
Computer-Aided Civil and Infrastructure Engineering, 20 (2005), S. 331 - 342.

B. Pichler, Ch. Hellmich, J. Eberhardsteiner, H.A. Mang:
"Semi-Probabilistic Design of Rockfall Protection Layers";
Computational Mechanics, 42 (2008), 2; S. 327 - 336.

B. Pichler, Ch. Hellmich, J. Eberhardsteiner, J. Wasserbauer, P. Termkhajornkit, R. Barbarulo, G. Chanvillard:
"Effect of Gel-Space Ratio and Microstructure on Strength of Hydrating Cementitious Materials: An Engineering Micromechanics Approach";
Cement and Concrete Research, 45 (2013), S. 55 - 68.

B. Pichler, Ch. Hellmich, H.A. Mang, J. Eberhardsteiner:
"Loading of a Gravel-Buried Steel Pipe Subjected to Rockfall";
Journal of Geotechnical and Geoenvironmental Engineering, 132 (2006), 11; S. 1465 - 1473.

E. Polonina, O. Lahayne, J. Eberhardsteiner, V. Potapov, S. Zhdanok, S. Leonovich:
"Nanoindentation Method for Studying the Structure of Modified Cement Stone";
Journal of Engineering Physics and Thermophysics, 94 (2021), 5; S. 1194 - 1207.

H. Rattensperger, J. Eberhardsteiner, H.A. Mang:
"Numerische Modellierung von Hochdruckhydraulikschläuchen mit Geflechtsverstärkungen";
PAMM - Proceedings in Applied Mathematics and Mechanics, 2 (2003), 1; S. 250 - 251.

R. Reihsner, R. Beer, J. Eberhardsteiner, H. Millesi:
"Neuentwicklung einer Prüfmaschine für zweiachsige Festigkeitsuntersuchungen an anisotropen weichen biologischen Geweben mit Anwendungsbeispielen";
ÖIAZ - Österreichische Ingenieur- und Architektenzeitschrift, 143 (1998), 6; S. 262 - 266.

T. Ring, M. Zeiml, R. Lackner, J. Eberhardsteiner:
"Experimental Investigation of Strain Behaviour of Heated Cement Paste and Concrete";
Strain, 49 (2013), S. 249 - 256.

R. Schaudy, J. Wendrinsky, R. Beer, J. Eberhardsteiner:
"Fixation of Three-Dimensional States of Deformation in Polymers by Ionizing Radiation - I. Search for New Polymeric Materials";
Radiation Physics and Chemistry, 46 (1995), 4-6; S. 867 - 870.

R. Schaudy, J. Wendrinsky, R. Beer, J. Eberhardsteiner:
"Fixation of Three-Dimensional States of Deformation in Polymers by Ionizing Radiation - II. Basic Fixation Experiments";
Radiation Physics and Chemistry, 51 (1997), 2; S. 153 - 157.

R. Schaudy, J. Wendrinsky, R. Beer, J. Eberhardsteiner:
"Fixation of Three-Dimensional States of Deformation in Polymers by Ionizing Radiation - III. Experimental Results and Implementation";
Radiation Physics and Chemistry, 52 (1998), 1-6; S. 243 - 246.

R. Schaudy, J. Wendrinsky, R. Beer, J. Eberhardsteiner:
"Irradiation of Polymers for Photoelastic Investigations";
Radiation Physics and Chemistry, 47 (1996), 3; S. 405 - 409.

St. Scheiner, B. Pichler, Ch. Hellmich, J. Eberhardsteiner:
"Loading of Soil-Covered Oil and Gas Pipelines Due to Adverse Soil Settlements - Protection Against Thermal Dilatation-Induced Wear, Involving Geosynthetics";
Computers and Geotechnics, 33 (2006), 8; S. 371 - 380.

T. Schlappal, J. Kalliauer, M. Vill, S. Gmainer, H.A. Mang, J. Eberhardsteiner, B. Pichler:
"Serviceability Limits of Reinforced Concrete Hinges";
Engineering Structures, 208 (2020), 109861.

T. Schlappal, J. Kalliauer, M. Vill, H.A. Mang, J. Eberhardsteiner, B. Pichler:
"Ultimate Limits of Reinforced Concrete Hinges";
Engineering Structures, 224 (2020), S. 1 - 16.

J. Schramm, R. Mundl, B. Wies, A. Becker, J. Eberhardsteiner, O. Lahayne:
"Reibtests von Gummi auf Schnee und Eis zum Studium des Einflusses von Profil und Mischung im Reifen-Straße-Kontakt";
VDI Berichte, 2022 (2007), S. 225 - 239.

M. Schweigler, T. Bader, G. Hochreiner, G. Unger, J. Eberhardsteiner:
"Load-to-Grain Angle Dependence of the Embedment Behavior of Dowel-Type Fasteners in Laminated Veneer Lumber";
Construction and Building Materials, 126 (2016), S. 1020 - 1033.

M. Schweigler, T. Bader, J. Vessby, J. Eberhardsteiner:
"Constrained Displacement Boundary Condition in Embedment Testing of Dowel-Type Fasteners in LVL";
Strain, 53 (2018), 6.

G. Skrbensky, F. Gottsauner-Wolf, R. Beer, W. Grienauer, J. Eberhardsteiner:
"Medical Aspects of the Load Transfer Mechanism of an Implant-Bone Connection in the Femur Using Gamma Radiation for Fiying the Experimental Information";
Journal of Biomechanics, 34 (2001), S. 37 - 42.

J. Sladek, V. Sladek, Ch. Hellmich, J. Eberhardsteiner:
"Analysis of Thick Functionally Graded Plates by Local Integral Equation Method";
Communications in Numerical Methods in Engineering, 23 (2007), 8; S. 733 - 754.

J. Sladek, V. Sladek, Ch. Hellmich, J. Eberhardsteiner:
"Heat Conduction Analysis of 3D Axisymmetric and Anisotropic FGM Bodies by Meshless Local Petrov-Galerkin Method";
Computational Mechanics, 39 (2007), 3; S. 323 - 333.

R. Stürzenbecher, K. Hofstetter, T. Bogensperger, G. Schickhofer, J. Eberhardsteiner:
"Development of High-Performance Strand Boards - Engineering Design and Experimental Investigations";
Wood Science and Technology, 44 (2010), 2; S. 13 - 29.

R. Stürzenbecher, K. Hofstetter, J. Eberhardsteiner:
"Structural Design of Cross Laminated Timber (CLT) by Advanced Plate Theories";
Composites Science and Technology, 70 (2010), S. 1368 - 1379.

R. Stürzenbecher, K. Hofstetter, G. Schickhofer, J. Eberhardsteiner:
"Development of High-Performance Strand Boards - Multiscale Modeling of Anisotropic Elasticity";
Wood Science and Technology, 44 (2010), 2; S. 205 - 223.

A. Teischinger, J. Fellner, J. Eberhardsteiner:
"Überlegungen zur Entwicklung eines Probekörpers zur Prüfung der Verleimungsqualitätvon Dreischicht/Massivholzplatten, Teil 1";
Holzforschung und Holzverwertung, 50 (1999), 5; S. 99 - 103.

C. Vida, M. Lukacevic, J. Eberhardsteiner, J. Füssl:
"Modeling Approach to Estimate the Bending Strength and Failure Mechanisms of Glued Laminated Timber Beams";
Engineering Structures, 255 (2022), 113862.

L. Wagner, T. Bader, J. Eberhardsteiner, K. de Borst:
"Fungal Degradation of Softwood Cell Walls: Enhanced Insight Through Micromechanical Modeling";
International Biodeterioration & Biodegradation, 93 (2014), S. 223 - 234.

G. Yakovlev, G. Skripkiunas, I. Polianskich, O. Lahayne, J. Eberhardsteiner, L. Urkhanova, I. Pudov, S. Sychogov, E. Karpova, S. Sen´Kov:
"Modification of Cement Matrix Using Carbon Naotube Dispersions and Nanosilica";
Procedia Engineering, 172 (2017), S. 1261 - 1269.

M. Zeiml, R. Lackner, D. Leithner, J. Eberhardsteiner:
"Identification of Residual Gas-Transport Properties of Concrete Subjected to High Temperatures";
Cement and Concrete Research, 38 (2008), 5; S. 699 - 716.


Editorials in wiss. Zeitschriften


J. Eberhardsteiner:
"Computational Methods in Tunnelling";
Acta Geotechnica, 3 (2008), 4; S. 249 - 322.

J. Eberhardsteiner, G. Hofstetter, G. Meschke:
"Computational Mechanics in Honour of the 70th Birthday of H.A. Mang";
Engineering Structures, 47 (2013), S. 1 - 154.

J. Eberhardsteiner, H.A. Mang, Franz Rammerstorfer:
"Special Issue of the Fifth World Congress on Computational Mechanics";
International Journal for Numerical Methods in Engineering, 60 (2004), 1; S. 1 - 427.

A. Teischinger, J. Eberhardsteiner:
"DokIn'Holz - Doktoratsinitiative Holz - Mehrwertstoff mit Zukunft";
Lignovisionen, 32 (2017), S. 1 - 84.


Buchbeiträge


T. Bader, K. Hofstetter, Ch. Hellmich, J. Eberhardsteiner:
"From Lignin to Spruce: Poromechanical Upscaling of Wood Strength";
in: "Soft Matter, Biological Materials and Biomedical Materials - Synthesis, Characterization and Applications", herausgegeben von: Materials Research Society; Materials Research Society, MRS Symposium Proceedings, Volume 1301, Warrendale, Pennsylvania, USA, 2011, ISBN: 978-1-605-11278-7, S. 75 - 80.

R. Blab, J. Eberhardsteiner:
"Schwerverkehr";
in: "Planet Austria", L. Lammerhuber, W. Piller, G. Köck (Hrg.); Verlag der Österreichischen Akademie der Wissenschaften, Wien, 2009, ISBN: 978-3-7001-6627-6, S. 360 - 369.

J. Eberhardsteiner:
"Experimentelle Methoden";
in: "Festigkeitslehre", H.A. Mang, G. Hofstetter (Hrg.); Springer, Wien, 2000, S. 433 - 468.

J. Eberhardsteiner:
"Experimentelle Methoden";
in: "Festigkeitslehre (zweite, aktualisierte Auflage)", H.A. Mang, G. Hofstetter (Hrg.); Springer, Wien New York, 2004, ISBN: 3-211-21208-6, S. 435 - 470.

J. Eberhardsteiner:
"Experimentelle Methoden";
in: "Festigkeitslehre", Springer Verlag, Vienna, 2008, ISBN: 978-3-211-72453-8, S. 435 - 470.

J. Eberhardsteiner:
"Experimentelle Methoden";
in: "Festigkeitslehre, 4th Edition", H.A. Mang, G. Hofstetter (Hrg.); Springer Verlag, Wien, 2013, ISBN: 978-3-642-40751-2, S. 497 - 532.

J. Eberhardsteiner, R. Brieger:
"Vorwort des Vorsitzenden und des stellvertretenden Vorsitzenden der Wissenschaftskommission beim BMLV";
in: "Die Wissenschaftskommission beim BMLV, Funktionsperiode 2017-2022, Verteidigungsforschung - Verteidigung forschen, Sinne, Intelligenz und Technologie im 21. Jahrhundert", herausgegeben von: Bundesministerium f. Landesverteidigung (BMLV); Heeresdruckzentrum, 1030 Wien, 2022, ISBN: 978-3-903359-34-5, S. 9 - 12.

J. Eberhardsteiner, Ch. Hellmich, H.A. Mang, J. Periaux:
"Preface";
in: "Computational Methods in Applied Sciences - ECCOMAS Multidisciplinary Jubilee Symposium on New Computational Challenges in Materials,Structures, and Fluids", 14; Springer Verlag, 2009, ISBN: 978-1-4020-9230-5, S. v - vi.

J. Eberhardsteiner, G. Hofstetter, C. Kropik, H.A. Mang:
"Elasto-viscoplastic Three-Dimensional Hybrid BE-FE Stress Analysis of the Excavation of Tunnels";
in: "Boundary Element Techniques in Geomechanics", G.D. Manolis, T.G. Davis (Hrg.); Computational Mechanics Publications, 1993, S. 327 - 358.

J. Eberhardsteiner, G. Hofstetter, G. Meschke, P. Helnwein:
"Coupled Matrial Modelling and Multifield Structural Analyses in Civil Engineering";
in: "FEM Class of 42 Anniversary, Ibiza, May 29-31,2002", International Center for Numerical Methods in Engineering (CIMNE), Barcelona, Spain, 2002, 29 S.

J. Eberhardsteiner, H.A. Mang, P. Torzicky:
"Hybrid BE-FE Stress Analysis of the Excavation of a Tunnel Bifurcation on the Basis of a Substructuring Technique";
in: "Advances in Boundary Element Techniques", J.H. Kane, G. Maier, N. Tosaka, S.N. Atluri (Hrg.); Springer, 1993, S. 105 - 128.

Ch. Hellmich, J. Eberhardsteiner:
"Institut für Mechanik der Werkstoffe und Strukturen - Institute for Mechanics of Materials and Structures";
in: "Die Fakultät für Bauingenieurwesen - The Faculty of Civil Engineering, 200 Jahre TU Wien", 6; R. Schneider-Rauscher, J. Eberhardsteiner (Hrg.); Böhlau Verlag Wien, 2015, ISBN: 978-3-205-20112-0, S. 29 - 37.

G. Hochreiner, J. Füssl, J. Eberhardsteiner, S. Aicher:
"CLT Plates under Concentrated Loading - Experimental Identification of Crack Modes and Corresponding Failure Mechanismus";
in: "Materials and Joints in Timber Structures - Recent Developments of Technology", Springer Verlag, Dordrecht, 2014, ISBN: 978-94-007-7810-8, S. 703 - 712.

R. Lackner, R. Blab, A. Jäger, M. Spiegl, K. Kappl, M. Wistuba, B. Gagliano, J. Eberhardsteiner:
"Multiscale Modeling as the Basis for Reliable Predictions of the Behaviour of Multi-Composed Materials";
in: "Progress in Engineering Computational Technology", B.H.V. Topping, C.A. Mota Soares (Hrg.); Saxe-Coburg Publications, 2004, (eingeladen), ISBN: 1-874672-22-9, S. 153 - 187.

H.A. Mang, J. Eberhardsteiner:
"Finite Elemente zur Berechnung von Schalentragwerken";
in: "Finite Elemente - Anwendungen in der Baupraxis", Wilhelm Ernst & Sohn, Berlin-München-Düsseldorf, 1985, S. 146 - 161.

H.A. Mang, J. Eberhardsteiner, C. Kropik, G. Meschke, L. Martak, H. Liebsch:
"Tunnelabzweigungen bei kriechaktiven Bodenverhältnissen";
in: "Schriftenreihe "Straßenforschung"", Bundesministerium für Bauten und Technik, Wien, Austria, 1994, S. 129.

B. Pichler, Ch. Hellmich, H.A. Mang, J. Eberhardsteiner:
"Rockfall onto Gravel-Covered Pipelines: From Real-Scale Experiments to Semi-Probabilistic Design of Gravel Protection Layers";
in: "FCP - Fritsch, Chiari & Partner ZT GmbH, Ideen werden Wirklichkeit - 50 Jahre Ingenieurleistungen", FCP - Fritsch, Chiari & Partner ZT GmbH, Wien, 2010, S. 38 - 45.

B. Pichler, Ch. Hellmich, St. Scheiner, J. Eberhardsteiner, H.A. Mang:
"Assessment of Protection Systems for Gravel-Buried Pipelines Considering Impact and Recurrent Shear Loading Caused by Thermal Deformations of the Pipe";
in: "Computational Plasticity, Volume 7 of Series on Computational Methods in Applied Sciences", E. Onate, D.R.J. Owen (Hrg.); Springer, 2007, ISBN: 978-1-4020-6576-7, S. 187 - 206.

St. Scheiner, B. Pichler, Ch. Hellmich, J. Eberhardsteiner:
"Safety Assessment during Construction of Shotcrete Tunnel Shells Using Micromechanical Material Models";
in: "TUNCONSTRUCT -Technology Innovation in Underground Construction", G. Beer (Hrg.); Taylor & Francis Group, 2009, ISBN: 978-0-415-55411-4, S. 261 - 282.

R. Stürzenbecher, K. Hofstetter, T. Bogensperger, G. Schickhofer, J. Eberhardsteiner:
"A Continuum Micromechanics Approach to Elasticity of Strand-Based Engineered Wood Products: Model Development and Experimental Validation";
in: "Composites with Micro- and Nano-Structure - Computational Modeling and Experiments", V. Kompis (Hrg.); Springer, 2008, ISBN: 978-1-4020-6974-1, S. 161 - 179.


Beiträge in Tagungsbänden


E. Aigner, R. Lackner, J. Eberhardsteiner:
"Recent Developments in Multiscale Modeling of Asphalt Concrete - From Continuum Micromechanics to Structural Analysis";
in: "Proceedings of the IV. European Conference on Computational Mechanics (ECCM 2010)", ECCOMAS, 2010, 2 S.

E. Aigner, R. Lackner, M. Wistuba, J. Eberhardsteiner, H.A. Mang:
"Multiscale Assessment of Low-Temperature Performance of Flexible Pavements";
in: "Trends in Engineering Computational Technology", B. Topping, M. Papadrakakis (Hrg.); Saxe-Coburg Publications, Stirlingshire, Scotland, 2008, (eingeladen), ISBN: 978-1-874672-36-4, S. 209 - 228.

E. Aigner, R. Lackner, M. Wistuba, M. Spiegl, R. Blab, J. Eberhardsteiner:
"Integration Schemes and Parameter Identification in Viscoelastic Modeling of Asphalt: Application to Low-Temperature Assessment of Flexible Pavements";
in: "Progress in Computational Mechanics - Proceedings of the Special Mini-Symposium in Honor of Professor Arantes e Oliveira 73rd Birthday (7th WCCM)", ICIST-IST (Instituto de Engenharia de Estruturas, Território e Construcao-Instituto Superior Técnico), 2007, (eingeladen), ISBN: 978-989-95625-0-9, S. 99 - 120.

E. Aigner, Ch. Pichler, R. Lackner, J. Eberhardsteiner:
"Recent Developments in Upscaling of Viscous Properties of Multi-Composed Materials - Application to Asphalt";
in: "CD-ROM Proceedings of the 7th World Congress on Computational Mechanics (WCCM VII)", Omnipress, 2006, Paper-Nr. 1455, 1 S.

M. Autengruber, M. Lukacevic, J. Eberhardsteiner, J. Füssl:
"A Numerical Simulation Tool for Coupled Heat and Mass Transfer in Wood";
in: "Programme & Book of Abstracts on Computational Methods in Wood Mechanics - from Material Properties to Timber Structures (CompWood 2017)", TU Verlag, Wien, 2017, ISBN: 978-3-903024-49-6, S. 62.

M. Autengruber, M. Lukacevic, J. Eberhardsteiner, J. Füssl:
"A Numerical Simulation Tool for Coupled Heat and Mass Transfer in Wood";
in: "Book of Abstracts of the XXI. St. Inter-Institute Seminar for Young Researchers", Department of Structural Mechanics, Budapest University of Technology and Economics, 2017, S. 6.

T. Bader, K. de Borst, J. Eberhardsteiner:
"Micromechanical Modeling of Wood - Multiscale Modeling and Model Validation";
in: "Book of Abstracts of the 19th Inter-Institute Seminar for Young Researchers", Technische Universität Wien, Institut für Mechanik der Werkstoffe und Strukturen, 2013, ISBN: 978-3-9503537-2-3, S. 20.

T. Bader, K. Hofstetter, Ch. Hellmich, J. Eberhardsteiner:
"From Ligning to Spruce: Poromechanical Upscaling of Wood Strength";
in: "2010 Engineering Mechanics Institute Conference, Book of Abstracts", Engineering Mechanics Institute, 2010, S. 146.

T. Bader, K. Hofstetter, Ch. Hellmich, J. Eberhardsteiner:
"Homogenization and Localization in a Multiscale Microporomechanical Model for Wood Strength";
in: "Proceedings of the 7th EUROMECH Solid Mechanics Conference ESMC2009 - Book of Abstracts", APMTAC - Portuguese Association for Theoretical, Applied and Computational Mechanics, 2009, ISBN: 978-989-96264-2-3, S. 285 - 286.

T. Bader, K. Hofstetter, Ch. Hellmich, J. Eberhardsteiner:
"Multiscale Microporomechanics Model for Estimation of Elastic Limit States of Softwood Materials";
in: "COST Action FP0802 Workshop - Experimental and Computational Methods in Wood Micromechanics", herausgegeben von: Vienna University of Technology, Institute for Mechanics of Materials and Structures; Eigenverlag, Wien, 2009, ISBN: 978-3-9502481-0-4, S. 107 - 108.

T. Bader, K. Hofstetter, Ch. Hellmich, J. Eberhardsteiner:
"Multiscale Microporomechanics of Softwood - Applications and Experimental Model Validation";
in: "Proceedings of the IV European Conference on Computational Mechanics (ECCM 2010)", ECCOMAS, 2010, 2 S.

T. Bader, K. Hofstetter, Ch. Hellmich, J. Eberhardsteiner:
"On the Relevance of Lignin Failure for Softwood Strength - a Poromicromechanical Approach";
in: "Proceedings of the XI International Conference on Computational Plasticity - Fundamentals and Applications", CIMNE, Barcelona, 2011, ISBN: 978-84-89925-23-6.

T. Bader, K. Hofstetter, Ch. Hellmich, J. Eberhardsteiner:
"Role of Water in Cell Walls of the Hierarchical Composite "Softwood": A Poroelastic Analysis";
in: "Proceeedings of the Engineering Mechanics Institute 2011 Conference (EMI 2011)", Engineering Mechanics Institute, Bonston, MA, USA, 2011, S. 195.

T. Bader, L. Muszynski, W. Lederer, J. Eberhardsteiner:
"Imaging the Micromechanical Response of Wood in Steel-Dowel Connections";
in: "Proceedings of the 30th Danubia-Adria-Symposium (DAS 30)", Croatian Society of Mechanics, 2013, ISBN: 978-953-7539-17-7, S. 109 - 110.

T. Bader, M. Schweigler, G. Hochreiner, J. Eberhardsteiner:
"Berechnungsmodell für das Last-Verformungsverhalten von Stabdübelgruppen im Ingenieurholzbau";
in: "Berichte der Fachtagung Baustatik-Baupraxis 12", TU-München, 2014, ISBN: 978-3-00-041256-1, S. 113 - 121.

T. Bader, M. Schweigler, G. Hochreiner, J. Eberhardsteiner:
"Load Distribution in Multi-Dowel Timber Connections Under Moment Loading - Integrative Evaluation of Multiscale Experiments";
in: "CD-ROM Proceedings of the World Conference on Timber Engineering (WCTE 2016)", J. Eberhardsteiner, W. Winter, A. Fadai, M. Pöll (Hrg.); herausgegeben von: Vienna University of Technology; Grafisches Zentrum HTU GmbH, Vienna, 2016, ISBN: 978-3-903039-00-1, Paper-Nr. 156, 9 S.

T. Bader, M. Schweigler, G. Hochreiner, J. Eberhardsteiner, M. DORN, E. Serrano:
"Integrative Research for an Enhanced Design of Dowel Connections";
in: "Proceedings of the EUROMECH Colloquium 556 on Theoretical, Numerical, and Experimental Analyses in Wood Mechanics", TU Dresden, 2015, ISBN: 978-3-00-049643-1, S. 82 - 83.

T. Bader, M. Schweigler, G. Hochreiner, J. Eberhardsteiner, E. Serrano, M. DORN, B. Enquist:
"Experimental Assessment of the Load Distribution in Multi-Dowel Timber Connections";
in: "Proceedings of the 17th International Conference on Experimental Mechanics (ICEM17)", European Society for Experimental Mechanics, 2016.

T. Bader, C. Wikete, A. Jäger, K. Hofstetter, J. Eberhardsteiner:
"Mechanical Properties and Microstructural Characteristics of Hardwood";
in: "COST Action FP 0802: Wood Structure/Function-Relationships", Johann Heinrich von Thünen Institute, Federal Research Institute for Rural Areas, Hamburg, 2010, S. 61.

R. Beer, J. Eberhardsteiner, S. Jecic, J. Kodvanj, R. Schaudy:
"Time Dependent Effects of Radiation-Cured Polymers for 3D Photoelasticity";
in: "Experiment in Solid Mechanics Yesterday, Today and Tomorrow", CTU Prag, 1995.

E. Binder, R. Reihsner, O. Lahayne, J. Eberhardsteiner, B. Pichler:
"Adaptation of a Cruciform Testing Machine Zwick/Roell Z050 for Biaxial Compression Creep Experiments";
in: "Book of Extended Abstracts of the 36th Danubia Adria Symposium on Advances in Experimental Mechanics", University of West Bohemia, 2019, ISBN: 978-80-261-0876-4, S. 109 - 110.

T. Brynk, Ch. Hellmich, A. Fritsch, P.K. Zysset, J. Eberhardsteiner:
"Experimental Poromechanics of Trabecular Bone Strength: Role of Terzaghi's Effective Stress and of Tissue Level Stress Fluctuations";
in: "Tagungsband 4. Wiener Biomaterialsymposium", TU Wien, Wien, 2010, S. 27.

T. Brynk, Ch. Hellmich, A. Fritsch, P.K. Zysset, J. Eberhardsteiner:
"Role of Terzaghi's Effective Stress in Experimental Poromechanics of Trabecular Bone Strength";
in: "2010 Engineering Mechanics Institute Conference, Book of Abstracts", Engineering Mechanics Institute, 2010, S. 42.

M. Dorn, K. de Borst, T. Bader, J. Eberhardsteiner:
"Numerical Simulations of the Loading Process of Dowel-Type Timber Connections";
in: "CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)", J. Eberhardsteiner, H. J. Böhm, F. G. Rammerstorfer (Hrg.); Vienna University of Technology, 2012, ISBN: 978-3-9502481-9-7, Paper-Nr. 1419, 2 S.

M. Dorn, K. Hofstetter, J. Eberhardsteiner:
"Experiments on the Load-Displacement Behavior of Dowel-Type Steel-To-Timber Connections";
in: "Proceedings of the 28th Danubia-Adria-Symposium", Hungarian Scientific Society for Mechanical Engineering (GTE), Budapest, 2011, ISBN: 978-963-9058-32-3, S. 255 - 256.

M. Dorn, K. Hofstetter, J. Eberhardsteiner:
"Three-Dimensional Modeling of Dowel-Type Steel-to-Timber Connections";
in: "Book of Abstracts of the 18th Inter-Institute Seminar", Department of Structural Mechanics, Budapest University of Technology and Economics, 2011, S. 29.

M. Dorn, K. Hofstetter, V. Nohajova, J. Eberhardsteiner:
"Investigating Various Influences on the Embedment Strength and Stiffenss of Wood";
in: "Proceedings of the 28th Danubia-Adria-Symposium", Hungarian Scientific Society for Mechanical Engineering (GTE), Budapest, 2011, ISBN: 978-963-9058-32-3, S. 253 - 254.

J. Eberhardsteiner:
"Finite Element Analysis of Thick-Walled RC Structures with Different Nonlinear-Elastic Material Models";
in: "Proceedings of the 2nd International Conference on Computer Aided Analysis and of Concrete Structures", N. Bicanic, H.A. Mang (Hrg.); Pineridge Press, Swansea, 1990, S. 695 - 706.

J. Eberhardsteiner, J. Füssl, R. Lackner:
"Multiscale Prediction of Strength Properties of Asphalt by means of Limit Analysis";
in: "9th US National Congress on Computational Mechanics (USNCCM 9)", USACM, 2007, (eingeladen), 1 S.

J. Eberhardsteiner, G. Hofstetter, H.A. Mang, G. Meschke:
"Traglastanalyse von (a) schlaff bewehrten, dickwandigen Konstruktionselementen und (b) vorgespannten, dünnwandigen Schalen aus Beton";
in: "Berichtsband über das Schlußkolloquium des DFG-Schwerpunktes: Nichtlineare Berechnungen im konstruktiven Ingenieurbau", E. Stein (Hrg.); Springer, 1989, S. 303 - 323.

J. Eberhardsteiner, K. Hofstetter:
"Computational Modeling of Wood and Wooden Structures";
in: "CD-ROM Proceedings of the 4th International Conference on Advanced Engineered Wood & Hybrid Composites", The University of Maine, 2008, (eingeladen), 1 S.

J. Eberhardsteiner, K. Hofstetter:
"Experimental and Numerical Multiscale Characterization of Wood";
in: "Proceedings of the 7th Youth Symposium on Experimental Solid Mechanics", Wroclaw University of Technology, Division of Biomedical Engineering and Experimental Mechanics, 2008, (eingeladen), ISBN: 978-83-7493-386-5, S. 23.

J. Eberhardsteiner, K. Hofstetter:
"Materialgesetze für Holz - Unerlässlich für die Bewertung und Prognose des Verhaltens von Holz und Holzkonstruktionen";
in: "12. Internationales Holzbau-Forum", Berner Fachhochschule Architektur, Holz und Bau, 2006, (eingeladen), ISBN: 978-3-8167-7235-4, S. 1 - 15.

J. Eberhardsteiner, K. Hofstetter:
"Werkstoffmodellierung in der numerischen Mechanik - mikro- und makromechanische Charakterisierung von Holz";
in: "Jahrbuch 2007 der Braunschweigischen Wissenschaftlichen Gesellschaft", J. Cramer Verlag, 2008, (eingeladen), ISBN: 978-3-934656-23-9, S. 157 - 172.

J. Eberhardsteiner, K. Hofstetter, Ch. Hellmich:
"Solid-Type and Plate-Type Load Carrying Mechanisms in Wood - Investigations by a Multistep Homogenization Scheme";
in: "Book of Abstracts, 16th Inter-Institute Seminar for Young Researchers", TU Wien, 2007, ISBN: 3-9501554-9-x, S. 21.

J. Eberhardsteiner, K. Hofstetter, H.A. Mang:
"Computational Modeling of Wood and Wooden Structures";
in: "Recent Developments in Structural Engineering, Mechanics and Computation - Proceedings of the Third International Conference on Structural Engineering, Mechanics and Computation (SEMC 2007)", Millpress, 2007, (eingeladen), ISBN: 978-905-96605-7-1, 6 S.

J. Eberhardsteiner, K. Hofstetter, B. Pichler, E. Aigner:
"Mehrskalenmodellierung von Baustoffen Holz, Spritzbeton und Asphalt";
in: "Proceedings of the Ansys Conference & 27. CADFEM Users' Meeting 2009", CADFEM, 2009, (eingeladen), ISBN: 3-937523-06-5, 45 S.

J. Eberhardsteiner, C. Kropik, H.A. Mang, G. Meschke:
"Material Modelling and Elasto-Viscoplastic Stress Analysis of a Tunnel Junction";
in: "Proceedings of the 8th International Conference of the International Association for Computer Methods and Advances in Geomechanics", H.J. Siriwardane, M.M. Zaman (Hrg.); Balkema, Rotterdam, 1994, S. 2571 - 2576.

J. Eberhardsteiner, O. Lahayne:
"Nano-Tests on Concrete Samples with and without Nanotubes";
in: "Proceedings of the VI International Conference on Nanotechnologies in Construction", Publishing LLC RIF "MATERIALS", 2014, S. 21 - 24.

J. Eberhardsteiner, Z.K. Li, H.A. Mang, P. Torzicky:
"Kopplung von Finite-Elemente- und Rand-Elemente-Methode in der Geotechnik";
in: "Berichtsband über die 4. Fachtagung "Baustatik-Baupraxis"", Institut für Baustatik, TU Braunschweig, 1990, S. 23.01 - 23.23.

J. Eberhardsteiner, Z.K. Li, H.A. Mang, P. Torzicky:
"Three-Dimensional Elasto-Plastic Hybrid BE-FE Stress Analysis of the Driving of Tunnels";
in: "Proceedings of the 5th International Conference on Computational Engineering with Boundary Elements", Computational Mechanics Publications, Ashurst Lodge, Southampton, 1990, S. 139 - 159.

J. Eberhardsteiner, P. Mackenzie-Helnwein:
"Biaxial Strength Tests for the Macroscopic Characterization of Clear Spruce Wood";
in: "CD-ROM Proceedings of the 16th ASCE Engineering Mechanics Conference", ASCE, 2003, 10 S.

J. Eberhardsteiner, H.A. Mang:
"Collapse Analysis of Thin RC Shells on the Basis of a New Fracture Criterion";
in: "Finite Element Analysis of Reinforced Concrete Structures", Chr. Meyer, H. Okamura (Hrg.); ASCE, New York, 1986, S. 579 - 601.

J. Eberhardsteiner, H.A. Mang, P. Torzicky:
"Elasto-Plastic Coupled BE-FE Stress Analysis of a Tube of Vienna's Underground Line U3, Considering Sequences of Driving and Securing by Shotcrete";
in: "Proceedings of the International Conference of the International Association fro Computer Methods and Advances in Geomechanics (IACMAG '91)", Balkema, Rotterdam, 1991, S. 1461 - 1465.

J. Eberhardsteiner, H.A. Mang, P. Torzicky:
"Three-Dimensional Elasto-Plastic Hybrid BE-FE Analysis of a Drifting Between the Two Tubes of Vienna's Underground Line U3";
in: "Proceedings of the Second World Congress on Computational Mechanics", IACM, Stuttgart, 1990, S. 572 - 576.

J. Eberhardsteiner, G. Meschke, H.A. Mang:
"Comparison of Constitutive Models for Triaxially Loaded Concrete";
in: "Proceedings of the IABSE Colloquium on Computational Mechanics of Reinforced Concrete", IABSE, 1987, S. 197 - 208.

J. Eberhardsteiner, G. Meschke, H.A. Mang:
"Synthesis of Constitutive Modelling of Triaxially Loaded Concrete and Finite Element Analysis of Thick-Walled RC Structures";
in: "Proceedings of the International Conference on Computational Engineering Science - Computational Mechanics '88", Springer, 1988, S. 30.ii.1 - 30.ii.4.

J. Eberhardsteiner, H. Rattensperger, W. Fidi:
"Numerische Modellierung von verstärkten Elastomer-Hydraulikschläuchen";
in: "International Rubber Conference 2003 (IRC '03)", Deutsche Kautschuk-Gesellschaft e.V., 2003, S. 319 - 322.

J. Eberhardsteiner, S. Schmid, O. Lahayne, R. Reihsner, B. Pichler:
"Micro-and Macroscopic Characterization of Granite";
in: "Proceedings of the 35th Danubia-Adria Symposium on Advances in Experimental Mechanics", Editura Printech, 2018, ISBN: 978-606-23-0874-2, S. 61 - 62.

A. Ettemeyer, J. Eberhardsteiner, M. Gingerl:
"Non-Contact Measurement of Three-Dimensional Strain Fields with TV-Holography";
in: "International IMEKO-Symposium ", VDI, Heidelberg, 1994, S. 39 - 44.

M. Fleischmann, J. Eberhardsteiner, L. Ondris:
"Experimental Investigation of Spruce Wood in Different Material-Directions and Constitutive Modelling Including Knot Effects";
in: "20th Danubia-Adria Symposium on Experimental Methods in Solid Mechanics - Abstracts", Scientific Society of Mechanical Engineering, 2003, ISBN: 9639058203, S. 14 - 15.

M. Fleischmann, H.W. Müllner, J. Eberhardsteiner:
"An Orthotropic Single-Surface Plasticity Model for Spruce Wood under Consideration of Knot Effects";
in: "Proceedings of the 21st Danubia-Adria Symposium on Experimental Methods in Solid Mechanics", S. Jecic, D. Semenski (Hrg.); CSM, Zagreb, 2004, ISBN: 953-96243-6-3, S. 246 - 247.

M. Fleischmann, H.W. Müllner, H. Krenn, J. Eberhardsteiner:
"Experimental and Numerical Investigation of Timber Structures for the Validation of an Orthotropic Plasticity Model";
in: "Proceedings of the 22nd Danubia-Adria Symposium on Experimental Methods in Solid Mechanics", G. Nicoletto (Hrg.); Italian Association for Stress Analysis, 2005, ISBN: 3-9501554-3-0, Paper-Nr. 144, 2 S.

A. Fritsch, R. Reihsner, H.W. Müllner, R. Slesinski, Ch. Hellmich, J. Eberhardsteiner, D. Godlinski, A. Rota:
"Uniaxial and Triaxial Mechanical Testing of Biomaterials for Bone Replacement";
in: "Book of Abstracts of the 23rd Danubia-Adria Symposium on Experimental Methods in Solid Mechanics", O. Bokuvka (Hrg.); University Zilina, 2006, ISBN: 80-8070-589-5, S. 127 - 128.

J. Füssl, R. Lackner, J. Eberhardsteiner:
"Effect of Deterioration Processes on Effective Strength of Concrete Highlighted by Means of Numerical Limit Analysis";
in: "Proceedings of the Eleventh East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-11)", D & E Drawing and Editing Services Company, Taipei, Taiwan, 2008, (eingeladen), ISBN: 978-986-80222-4-9, S. 272 - 273.

J. Füssl, R. Lackner, J. Eberhardsteiner:
"Strength Properties of Composites Highlighted by Means of Numerical Limit Analysis";
in: "Taiwan-Austria Joint Workshop on Computational Mechanics of Materials and Structures", National Taiwan University of Science and Technology, Taipei, Taiwan, 2008, (eingeladen), S. 31 - 32.

J. Füssl, M. Li, M. Lukacevic, J. Eberhardsteiner, C. Martin:
"Three Different Methods for Predicting the Strength Behavior of Clear Wood - A Performance Comparison and Basis for a Combined Approach";
in: "CD-ROM Proceedings of the World Conference on Timber Engineering (WCTE 2016)", J. Eberhardsteiner, W. Winter, A. Fadai, M. Pöll (Hrg.); herausgegeben von: Vienna University of Technology; Grafisches Zentrum HTU GmbH, Vienna, 2016, ISBN: 978-3-903039-00-1, Paper-Nr. 863, 10 S.

J. Füssl, M. Lukacevic, G. Kandler, J. Eberhardsteiner:
"A Comprehensive Mechanical Modeling Approach for the Optimization of Wood-Based Products";
in: "Proceedings of the EUROMECH Colloquium 556 on Theoretical, Numerical, and Experimental Analyses in Wood Mechanics", TU Dresden, 2015, ISBN: 978-3-00-049643-1, S. 40 - 41.

A. Galek, H. Moser, T. Ring, M. Zeiml, R. Lackner, J. Eberhardsteiner:
"Experimental Investigation of Strain Behavior and Transport Properties of Thermally-Loaded Concrete";
in: "Proceedings of the 27th Danubia-Adria Symposium on Advances in Experimental Mechanics", Wroclaw University of Technology, Wroclaw, Poland, 2010, ISBN: 978-83-87982-59-1, S. 63 - 64.

P. Godinho, M. Jajcinovic, L. Wagner, V. Vass, W. Fischer, T. Bader, U. Hirn, W. Bauer, J. Eberhardsteiner, Ch. Hellmich:
"A Continuum Micromechanics Approach to the Strength of Planar Fiber Networks: Paper Material Applications";
in: "Proceedings of the 3rd VIENNA young SCIENTISTS SYMPOSIUM (VSS 2017)", B. Artner, A. Bogadi, J. Grames, I. Hahn, P. Hans, H. Krebs, T. Rouhi (Hrg.); Book-of-Abstracts.com, Gumpoldskirchen, 2017, ISBN: 978-3-9504017-5-2.

P. Godinho, L. Wagner, V. Vass, J. Eberhardsteiner, Ch. Hellmich:
"A Continuum Micromechanics Approach to the Elasticity of Planar Fiber Networks and Its Application to Paper";
in: "CD-ROM Proceedings of the World Conference on Timber Engineering (WCTE 2016)", J. Eberhardsteiner, W. Winter, A. Fadai, M. Pöll (Hrg.); herausgegeben von: Vienna University of Technology; Grafisches Zentrum HTU GmbH, Vienna, 2016, ISBN: 978-3-903039-00-1, Paper-Nr. 1074, 8 S.

C. Hackspiel, K. Hofstetter, J. Eberhardsteiner:
"Investigating the Effect of Knots on the Mechanical Behavior of Wooden Boards by Means of Numerical Simulations";
in: "Proceedings of the 17th Inter-Institute seminar for Young Researchers", Cracow University of Technology, Cracow, Poland, 2009, S. 25.

C. Hackspiel, K. Hofstetter, M. Lukacevic, J. Eberhardsteiner:
"A Numerical Simulation Tool for Wood Grading";
in: "Proceeding of the IV European Conference on Computational Mechanics (ECCM 2010)", ECCOMAS, 2010, 2 S.

C. Hackspiel, K. Hofstetter, M. Lukacevic, J. Eberhardsteiner:
"Computational Analysis of the Strength Reducing Effect of Knots in Timber";
in: "Proceedings of the 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics - Abstracts", Centre for Infrastructure Engineering and Safety, Sydney, Australia, 2010, ISBN: 978-0-9808244-0-7, 1 S.

Ch. Hellmich, J. Eberhardsteiner, H.A. Mang, B. Pichler:
"Research at the Institute for Mechanics of Materials and Structures (IMWS) of Vienna University of Technology, Austria";
in: "Book of Abstracts of the 19th Inter-Institute Seminar for Young Researchers", Technische Universität Wien, Institut für Mechanik der Werkstoffe und Strukturen, 2013, ISBN: 978-3-9503537-2-3, S. 9.

P. Helnwein, J. Eberhardsteiner, A. Hanhijärvi:
"Constitutive Model for the Short-Term Failure Analysis of Wood Under Multiaxial States of Stress: Effect of Radial Compression";
in: "Proceedings of the First International Conference of the European Society for Wood Mechanics", P. Navi (Hrg.); European Society for Wood Mechanics, Swiss Federal Institute of Technology (EPFL), Repographie EPFL, Lausanne, Switzerland, 2002, ISBN: 2-9700377-0-x, S. 285 - 294.

P. Helnwein, J. Eberhardsteiner, H.A. Mang:
"Modeling of Biaxially Stressed Wood under Plane Stress Conditions as an Orthotropic Multi-Surface Elasto-Plastic Material";
in: "Proceedings of the Fifth World Congress on Computational Mechanics (WCCM V) (Online-Proceedings http://wccm.tuwien.ac.at)", H.A. Mang, F. G. Rammerstorfer, J. Eberhardsteiner (Hrg.); TU Wien, Wien, Austria, 2002, ISBN: 3-9501554-0-6.

P. Helnwein, J. Eberhardsteiner, H.A. Mang:
"Short-term Mechanical Behavior of Biaxially Stressed Wood: Experimental Observations and Constitutive Modeling as Orthotropic Multi-Surface Elasto-Plastic Material";
in: "Proceedings of the 14th US National Congress of Theoretical and Applied Mechanics", R.C. Batra, E.G. Henneke (Hrg.); Virginia Tech Press, Blacksburg, VA, USA, 2002, ISBN: 0-9721257-0-1, S. 290 - 291.

P. Helnwein, M. Fleischmann, J. Eberhardsteiner:
"Viscous and Plastic Phenomena on Clear Spruce Wood Under Quasi-Static Cyclic Compressive Loading Perpendicular to Grain";
in: "19th Danubia-Adria Symposium on Experimental Methods in Solid Mechanics - Abstracts", J. Stupnicki (Hrg.); Committee for Mechanics of the Polish Academy of Sciences, Polanica Zdrój, Poland, 2002, S. 150 - 151.

P. Helnwein, A. Hanhijärvi, J. Eberhardsteiner:
"Long-Term Behavior of Wood Under Multiaxial States of Stress and Simulation of Structural Details";
in: "CD-ROM Proceedings of the World Conference on Timber Engineering", University of British Columbia, Whistler Resort, British Columbia, Canada, 2000.

M. Hlobil, P. Karte, R. Reihsner, W. Dörner, J. Eberhardsteiner, B. Pichler:
"Mechanical Stiffness and Strength Testing of Cement Pastes at very Early Ages";
in: "Proceedings of the 30th Danubia-Adria-Symposium (DAS 30)", Croatian Society of Mechanics, 2013, ISBN: 978-953-7539-17-7, S. 226 - 227.

G. Hochreiner, T. Bader, M. Schweigler, J. Eberhardsteiner:
"Timber Matrix Failure Modes in Multi-Dowel Connections";
in: "Proceedings of the 17th International Conference on Experimental Mechanics (ICEM 17)", European Society for Experimental Mechanics, 2016.

G. Hochreiner, J. Füssl, J. Eberhardsteiner:
"Glulam - Experimental Characterisation of Local Stiffness and Failure Modes by DIC";
in: "Proceedings of the 32nd Danubia-Adria-Symposium (DAS 32)", University Zilina, 2015, S. 1 - 2.

G. Hochreiner, J. Füssl, J. Eberhardsteiner:
"Identification of the Failure Modes of CLT-Plates by Means of DIC Measurements";
in: "Proceedings of the 30th Danubia-Adria-Symposium (DAS 30)", Croatian Society of Mechanics, 2013, ISBN: 978-953-7539-17-7, S. 185 - 186.

G. Hochreiner, J. Füssl, J. Eberhardsteiner:
"Punktgestützte Brettsperrholzplatten - Erfahrungen mit numerischen Methoden bezogen auf die Bemessung im Alltag";
in: "Berichte der Fachtagung Baustatik - Baupraxis 13", Ruhr-Universität Bochum, Bochum, 2017, ISBN: 978-3-00-055827-6, S. 341 - 348.

G. Hochreiner, K. Hofstetter, J. Eberhardsteiner:
"Plastizität im Ingenieurholzbau - Baustatische Modellbildung an ausgewählten Beispielen";
in: "Berichte der Fachtagung Baustatik-Baupraxis 11", G. Beer, C. Dünser, G. Hofstetter, Y. Theiner (Hrg.); herausgegeben von: Institut für Baustatik, Technische Universität Graz; TU Graz, Graz, 2011, (eingeladen), ISBN: 978-3-85125-115-9, S. 147 - 154.

G. Hochreiner, M. Schweigler, J. Eberhardsteiner:
"Assessment of Embedment and Plug-Tension-Shear Failure of Dowel Groups by DIC-Measurements";
in: "Proceedings of the 31st Danubia-Adria Symposium on Advances in Experimental Mechanics", VDI Verein Deutscher Ingenieure e.V., Düsseldorf, 2014, ISBN: 978-3-00-046740-0, S. 209 - 210.

G. Hochreiner, M. Schweigler, J. Eberhardsteiner:
"Embedding Behaviour of Dowel Type Connectors in Wood Interpretation of Experimental Findings";
in: "Book of Abstracts of the 33rd Danubia Adria Symposium on Advances in Experimental Mechanics", Slovenian Society of Experimental Mechanics, 2016, S. 132 - 133.

G. Hochreiner, M. Schweigler, C. Riedl, T. Bader, J. Eberhardsteiner:
"Matrix Failure of Multi-Dowel Type Connections Engineering Modelling and Parameter Study";
in: "Proceedings of the World Conference on Timber Engineering (WCTE 2016)", J. Eberhardsteiner, W. Winter, A. Fadai, M. Pöll (Hrg.); herausgegeben von: Vienna University of Technology; Grafisches Zentrum HTU GmbH, Vienna, 2016, ISBN: 978-3-903039-00-1, Paper-Nr. 795, 10 S.

R. Höller, M. Aminbaghai, L. Eberhardsteiner, J. Eberhardsteiner, R. Blab, B. Pichler, Ch. Hellmich:
"Rigorous Amendment of Vlasov's Theory for Thin Elastic Plates on Elastic Winkler Foundations, Based on the Priciple of Virtual Power";
in: "Programme & Proceedings of the China-Austria Forum for Postgraduates of Civil Engineering", J. Zhang, B. Pichler (Hrg.); Vienna University of Technology, 2019, S. 106 - 109.

R. Höller, M. Aminbaghai, L. Eberhardsteiner, J. Eberhardsteiner, R. Blab, B. Pichler, Ch. Hellmich:
"Rigorous Amendment of Vlasov's Theory for Thin Elastic Plates on Elastic Winkler Foundations, Based on the Priniple of Virtual Power";
in: "Book of Abstracts of the 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019)", J. Eberhardsteiner, J. Schöberl (Hrg.); TU Verlag, 2019, ISBN: 978-3-903024-84-7, S. 156.

K. Hofstetter, J. Eberhardsteiner:
"Microstructural Modeling of Elastic Limit States of Wood";
in: "Proceedings of the 6th International Congress of Croatian Society of Mechanics", Croatian Society of Mechanics, Zagreb, Croatia, 2009, (eingeladen), ISBN: 978-953-7539-11-5, 8 S.

K. Hofstetter, J. Eberhardsteiner:
"Recent Developments in Mechanical Modelling of Wood and Wood Materials";
in: "XIIth International Scientific Conference on the Occasion of the 110th Anniversary of the Founding of the Faculty of Civil Engineering of Brno University of Technology and the XIVth Anniversary of Building Fairs Brno", Brno University of Technology, Brno, Czech Republic, 2009, (eingeladen), ISBN: 978-80-7204-629-4, S. 13 - 16.

K. Hofstetter, J. Eberhardsteiner:
"Wood and Wood Products: Mechanical Characterisation from Nano Scale to Structural Scale";
in: "Proceedings of the 7th International Conference on Computational Mechanics for Spatial Structures", A. Ibrahimbegovic, S. Dolarevic, M. Hrasnica, M. Madzarevic, M. Zlatar (Hrg.); Faculty of Civil Engineering Sarajevo, 2012, ISBN: 978-9958-638-30-5, S. 150 - 151.

K. Hofstetter, J. Eberhardsteiner, H.A. Mang:
"Investigation of Thermal Effects and the Role of Local Abrasion in Rubber Friction Processes";
in: "Proceedings of the 6th International Conference on Computational Methods in Contact Mechanics", C.A. Brebbia (Hrg.); WIT Press, Southampton, 2003, ISBN: 1853129631, S. 137 - 146.

K. Hofstetter, J. Eberhardsteiner, H.A. Mang:
"Modelling of Local Friction and Wear in Tire Simulations";
in: "CD-ROM Proceedings of the 6th World Congress on Computational Mechanics (WCCM VI) in conjunction with the 2nd Asian-Pacific Congress on Computational Mechanics (APCOM'04)", Z.H. Yao, M.W. Yuan, W.X. Zhong (Hrg.); Tsinghua University Press, Springer Verlag, 2004, ISBN: 7-89494-512-9, 10 S.

K. Hofstetter, J. Eberhardsteiner, H.A. Mang, S. Del Linz:
"A Thermo-Mechanical Formulation Describing the Frictional Behavior of Rubber";
in: "Proceedings of the Fifth World Congress on Computational Mechanics (WCCM V) (Online-Proceedings http://wccm.tuwien.ac.at)", H.A. Mang, F. G. Rammerstorfer, J. Eberhardsteiner (Hrg.); TU Wien, 2002.

K. Hofstetter, J. Eberhardsteiner, R. Stürzenbecher, C. Hackspiel:
"Wood and Wood Products - Linking Multiscale Analysis and Structural Numerical Simulations";
in: "Proceedings ot the 7th European LS-DYNA Conference", DYNAmore GmbH, 2009, (eingeladen), ISBN: 3-9809901-5-x, S. 24 - 34.

K. Hofstetter, J. Eitelberger, T. Bader, Ch. Hellmich, J. Eberhardsteiner:
"Computational Multiscale Approach to the Mechanical Behavior and Transport Behavior of Wood";
in: "Proceedings of the International Symposium on Computational Structural Engineering", Y. Yuan, J. Cui, H.A. Mang (Hrg.); Springer Verlag, 2009, (eingeladen), ISBN: 978-90-481-2821-1, S. 79 - 85.

K. Hofstetter, Ch. Grohs, J. Eberhardsteiner, H.A. Mang:
"Numerical Simulation of Rubber Tread Blocks in Frictional Sliding";
in: "CD-ROM Proceedings of the 7th International Conference on Computational Structures Technology (CST 2004)", B.H.V. Topping, C.A. Mota Soares (Hrg.); Civil-Comp Press, 2004, ISBN: 0-948749-94-6, Paper-Nr. 66, 20 S.

K. Hofstetter, Ch. Hellmich, T. Bader, J. Eberhardsteiner:
"Poro-micromechanical Estimates for Elastic Limit States of Wood";
in: "Proceedings of the Eleventh East Asia-Pacific Conference on Structural Engineering and Construction", D & E Drawing and Editing Services Company, Taipei, Taiwan, 2008, (eingeladen), ISBN: 978-986-80222-4-9, S. 550 - 551.

K. Hofstetter, Ch. Hellmich, T. Bader, J. Eberhardsteiner:
"Relevance of Microstructural Failure Mechanismus for Macroscopic Elastic Limit States of Wood";
in: "Taiwan-Austria Joint Workshop on Computational Mechanics of Materials and Structures", National Taiwan University of Science and Technology, Taipei, Taiwan, 2008, (eingeladen), S. 48 - 49.

K. Hofstetter, Ch. Hellmich, J. Eberhardsteiner:
"A Continuum Micromechanics Approach to Wood Elasticity";
in: "CD-ROM Proceedings of the 16th International Conference on Computer Methods in Mechanics (CMM-2005)", A. Garstecki, B. Mochnacki, N. Sczygiol (Hrg.); CEACM, 2005, ISBN: 83-921605-7-6, 10 S.

K. Hofstetter, Ch. Hellmich, J. Eberhardsteiner:
"Continuum Micromechanics Estimation of Wood Strength";
in: "Book of Abstracts of the 77th Annual Meeting of the GAMM", V. Mehrmann, C.O. Paschereit, W.H. Müller, U. von Wagner, C. Mehl (Hrg.); Technische Universität Berlin, 2006, S. 49 - 50.

K. Hofstetter, Ch. Hellmich, J. Eberhardsteiner:
"Effect of Ray Cells on Wood Stiffness and Strength: A Continuum Micromechanics Investigation";
in: "CD-ROM Proceedings of the 7th World Congress on Computational Mechanics (WCCM VII)", IACM, 2006, Paper-Nr. 1112, 1 S.

K. Hofstetter, Ch. Hellmich, J. Eberhardsteiner:
"Estimation of Anisotropic Macroscopic Wood Strength from Local Failure of Lignin and Microstructural Characteristics";
in: "Proceedings of the International Conference on Integrated Approach to Wood Structure, Behaviour and Applications", M. Fioravanti, N. Macchioni (Hrg.); ESWM & COST Action E35, 2006, S. 93 - 98.

K. Hofstetter, Ch. Hellmich, J. Eberhardsteiner:
"Estimation of Anisotropic Macroscopic Wood Strength from Local Failure of Lignin and Microstructural Characteristics";
in: "Proceeding of the International Conference on Integrated Approach to Wood Structure, Behaviour and Applications", M. Fioravanti, N. Macchioni (Hrg.); ESWM & COST Action E35, 2008, ISBN: 978-88-901660-2-0, S. 93 - 98.

K. Hofstetter, Ch. Hellmich, J. Eberhardsteiner:
"Hierarchical Organization of Wood Revisited in the Framework of Continuum Micromechanics";
in: "Proceedings of the 4th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2004)", P. Neittaanmäki, T. Rossi, S. Korotov, E. Onate, J. Periaux, D. Knörzer (Hrg.); ECCOMAS, 2004, ISBN: 951-39-1869-6, 20 S.

K. Hofstetter, Ch. Hellmich, J. Eberhardsteiner:
"Load Carrying Mechanisms in Wood at Different Observation Scales: a Combined Random-Periodic Multistep Homogenization Scheme";
in: "Mechanics of Biological and Bio-Inspired Materials, Symposium Proceeding Vol. 975E", Materials Research Society, 2006, 7 S.

K. Hofstetter, Ch. Hellmich, J. Eberhardsteiner:
"Mechanical Relevance of Structural Features of Wood at Different Observation Scales: Investigations Based on Multistep Homogenization";
in: "Proceedings of the Third International Symposium on Wood Machining", Presses polytechniques et universitaires romandes, 2007, ISBN: 978-2-88074-725-1, S. 201 - 204.

K. Hofstetter, Ch. Hellmich, J. Eberhardsteiner:
"Microelasticity of Wood";
in: "CD-ROM Proceedings of McMat 2005: 2005 Joint ASME/ASCE/SES Conference on Mechanics and Materials", G.Z. Voyiadjis, R.J. Dorgan (Hrg.); ASME/ASCE/SES, 2005, Paper-Nr. 202, 1 S.

K. Hofstetter, Ch. Hellmich, J. Eberhardsteiner:
"Poro-Microelasticity of Wood: The Relevance of the Microfibril Angle";
in: "Proceedings of the 3rd Biot Conference on Poromechanics - Bio Centennial (1905-2005)", Y.N. Abousleiman, A. H.-D. Cheng, F.-J Ulm (Hrg.); Taylor & Francis Group, 2005, ISBN: 0415380413, S. 149 - 154.

K. Hofstetter, Ch. Hellmich, J. Eberhardsteiner:
"Predicting Wood Strength from Composition and Microstructure: Development and Experimental Verification of a Continuum Micromechanics Model";
in: "Microstructure et Propriétés des Matériaux", L. Dormieux, D. Kondo, K. Sab (Hrg.); Presses de l'école nationale des ponts et chaussées, 2005, ISBN: 2-85978-412-8, S. 217 - 222.

K. Hofstetter, Ch. Hellmich, J. Eberhardsteiner:
"Prediction of Wood Elasticity from Microstructure and Chemical Composition: The Role of Intra-Species Variations in Cell Wall Chemistry";
in: "CD-ROM Proceedings of the 6th World Congress on Computational Mechanics (WCCM VI) in conjunction with the 2nd Asian-Pacific Congress on Computational Mechanics (APCOM'04)", Z.H. Yao, M.W. Yuan, W.X. Zhong (Hrg.); Tsinghua University Press, Springer Verlag, 2004, ISBN: 7-89494-512-9, 10 S.

K. Hofstetter, Ch. Hellmich, J. Eberhardsteiner:
"Relating Elastic Properties of Wood to Solid-Type and Plate-Type Microstructural Deformations: Application of a Multistep Homogenization Scheme";
in: "Computational Plasticity IX Fundamentals and Applications (Proceedings of COMPLAS IX 2007)", CIMNE, 2007, ISBN: 978-84-96736-27-6, S. 486 - 489.

K. Hofstetter, Ch. Hellmich, J. Eberhardsteiner:
"Solid-Type and Plate-Type Microstructural Deformation Patterns in Wood Elasticity Quantified through a Combined Random / Periodic Theory";
in: "Proceedings of the 18th Engineering Mechanics Division Conference", ASCE, 2007, 1 S.

K. Hofstetter, Ch. Hellmich, J. Eberhardsteiner:
"Universal Morphological Patterns in Wood: Micro-Mechanics-Based Estimates for Anisotropic Stiffness and Strength from Composition and Microstructure";
in: "Program and Abstract Book ICIAM 07", ETH Zürich and University of Zürich, 2007, 1 S.

K. Hofstetter, Ch. Hellmich, J. Eberhardsteiner:
"Universal Morphological Patterns in Wood: Micromechanics-based Prediction of Anisotropic Strength from Composition and Microstructure";
in: "Abstracts of the 5th World Congress of Biomechanics - Journal of Biomechanics (Vol. 39, Suppl. 1)", R. Huiskes, F. Guilak (Hrg.); Elsevier Science, 2006, ISSN: 0021-9290, S. S351.

K. Hofstetter, Ch. Hellmich, J. Eberhardsteiner:
"Upscaling Anisotropic Stiffness and Strength Properties of Wood";
in: "CD-ROM Proceedings of the 8th World Congress on Computational Mechanics (WCCM 8) and the 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008)", CIMNE, 2008, ISBN: 978-84-96736-55-9, 2 S.

K. Hofstetter, Ch. Hellmich, J. Eberhardsteiner:
"Wood Elasticity Revisited in the Framework of Continuum Micromechanics";
in: "CD-ROM Proceedings of the 8th U.S. National Congress on Computational Mechanics", L. Demkowicz, C. Dawson (Hrg.); USACM, 2005, 1 S.

T. Huemer, J. Eberhardsteiner, W. Liu, H.A. Mang:
"Experimental and Numerical Investigation of the Friction Behavior of Rubber Blocks on Concrete and Ice Surfaces";
in: "Constitutive Models for Rubber", L. Dorfmann, A. Muhr (Hrg.); Balkema, 1999, S. 139 - 144.

T. Huemer, W. Liu, J. Eberhardsteiner, G. Meschke, H.A. Mang:
"Sliding Behavior of Rubber on Snow and Concrete Surfaces";
in: "Deutsche Kautschuk-Tagung 2000", Deutsche Kautschuk-Gesellschaft e.V., Nürnberg, Germany, 2000, S. 135 - 137.

A. Jäger, T. Bader, K. Hofstetter, J. Eberhardsteiner:
"Identification of Elastic Properties of Wood Cell Walls by Means of Nanoindentation";
in: "Proceedings of the 26th Danubia-Adria Symposium on Advances in Experimental Mechanics", Institute of Mechanical Engineering, Montanuniversität Leoben, 2009, ISBN: 978-3-902544-02-5, S. 83 - 84.

A. Jäger, K. Hofstetter, J. Eberhardsteiner:
"The Relation between Microfibril Angle and Indentation Modulus of Wood Cell Walls";
in: "COST Action FP0802 Workshop - Experimental and Computational Methods in Wood Micromechanics", herausgegeben von: Vienna University of Technology, Institute for Mechanics of Materials and Structures; Eigenverlag, Wien, 2009, ISBN: 978-3-9502481-0-4, S. 97 - 98.

S. Jecic, R. Beer, R. Schaudy, J. Eberhardsteiner:
"Recent Developments in 3D-Photoelasticity by Means of Ionizing Radiation";
in: "XIV. IMEKO World Congress", IMEKO, 1997, S. 43 - 50.

S. Jecic, J. Kodvanj, J. Eberhardsteiner, R. Schaudy:
"Optical Creep of Radiation Cured Polymers - Application to 3-Dimensional Photoelasticity";
in: "1st International Conference on Mechanics of Time Dependent Materials", SEM (Society for Experimental Mechanics), Laibach, 1995, S. 201 - 206.

G. Kandler, J. Füssl, J. Eberhardsteiner:
"A Numerical Approach for the Mechanical and Probabilistic Assessment of Timber Products";
in: "Book of Abstracts of the 19th Inter-Institute Seminar for Young Researchers", Technische Universität Wien, Institut für Mechanik der Werkstoffe und Strukturen, 2013, ISBN: 978-3-9503537-2-3, S. 19.

G. Kandler, J. Füssl, J. Eberhardsteiner:
"A Numerical Approach for Wood Products - From Clear Wood Properties and `Structural´ Inhomogeneities to Stochastic Aspects of Timber";
in: "Proceedings of the XII. International Conference on Computational Plasticity (COMPLAS XII)", International Center for Numerical Methods in Engineering (CIMNE), 2013, ISBN: 978-84-941531-5-0, 1 S.

G. Kandler, J. Füssl, J. Eberhardsteiner:
"A Probabilistic Model to Account for Stiffness Variation in Glued Laminated Timber";
in: "Proceedings of the 11th World Congress on Computational Mechanics (WCCM XI)", CIMNE, 2014, 2 S.

G. Kandler, J. Füssl, J. Eberhardsteiner:
"Influence of Stiffness Variation in Timber Boards on Effective Behavior of GLT";
in: "Berichte des Doktorandenkolloquium Holzbau Forschung + Praxis", Universität Stuttgart, 2014, S. 111 - 118.

G. Kandler, L. Wagner, J. Füssl, E. Serrano, J. Eberhardsteiner:
"Influence of Stiffness Variation in Timber Boards on Effective Behavior of GLT";
in: "Proceedings of the 11th World Congress on Computational Mechanics (WCCM XI)", CIMNE, 2014, 2 S.

J. Kodvanj, R. Beer, J. Eberhardsteiner, S. Jecic:
"Investigation of Mechanical Problems in the Application of Acetabulum Cups for Hip Prothesis";
in: "Proceedings of the 22nd Danubia-Adria Symposium on Experimental Methods in Solid Mechanics", G. Nicoletto (Hrg.); Italian Association for Stress Analysis, 2005, ISBN: 3-9501554-3-0, Paper-Nr. 120, 2 S.

J. Kodvanj, J. Eberhardsteiner, R. Beer, S. Jecic:
"Einfluss der Modelldicke auf die Formzahlen bei Kerbspannungsproblemen";
in: "GESA-Symposium 2001", GESA, Chemnitz, Germany, 2001.

Ch. Kohlhauser, Ch. Hellmich, J. Eberhardsteiner:
"Determination of Material Elasticity with Ultrasonic Waves";
in: "Proceedings of the 6th Youth Symposium on Experimental Solid Mechanics (YSESM '07)", Faculty of Mechanical Engineering, Kraljevo, 2007, ISBN: 978-86-82631-39-2, S. 295 - 298.

Ch. Kohlhauser, Ch. Hellmich, J. Eberhardsteiner:
"Dimensional Analysis of Ultrasonic Wave Velocity Measurements";
in: "Proceedings of the 7th Youth Symposium on Experimental Solid Mechanics", Wroclaw University of Technology, Division of Biomedical Engineering and Experimental Mechanics, 2008, (eingeladen), ISBN: 978-83-7493-386-5, S. 42.

Ch. Kohlhauser, Ch. Hellmich, J. Eberhardsteiner:
"Ultrasonic Determination of Elasticity Tensor: Potentials and Limitations";
in: "Book of Abstracts, 16th Inter-Institute Seminar for Young Researchers", TU Wien, 2007, ISBN: 3-9501554-9-x, S. 12.

Ch. Kohlhauser, Ch. Hellmich, K. Hofstetter, J. Eberhardsteiner:
"Influence of Specimen Geometry on Ultrasonic Wave Propagation across Different Frequencies for the Determination of Elastic Stiffness Tensor Components";
in: "2007 ICU Vienna - International Congress on Ultrasonics (Program and Book of Abstracts)", Eigenverlag, 2007, S. 75.

Ch. Kohlhauser, Ch. Hellmich, K. Hofstetter, J. Eberhardsteiner:
"Ultrasonic Characterization of Wood Across Different Frequencies";
in: "Proceedings of the International PhD Workshop on "Wood as a Building Material"", Norwegian University of Science and Technology, 2006, S. 12 - 13.

Ch. Kohlhauser, Ch. Hellmich, C. Vitale-Brovarone, A. Boccaccini, D. Godlinski, J. Eberhardsteiner:
"Ultrasonic Characterization of Porous Biomaterials Across Different Frequencies";
in: "Proceedings of the 13th International Conference on Experimental Mechanics (ICEM 13) - Experimental Analysis of Nano and Engineering Materials and Structures", Springer, 2007, ISBN: 978-1-4020-6238-4, S. 505 - 506.

Ch. Kohlhauser, K. Hofstetter, Ch. Hellmich, J. Eberhardsteiner:
"Determination of Orthotropic Elastic Stiffness Tensor Components of Wood with Ultrasonic Waves of Different Frequencies";
in: "Proceedings of the Third International Symposium on Wood Machining", Presses polytechniques et universitaires romandes, 2007, ISBN: 978-2-88074-725-1, S. 175 - 178.

Ch. Kohlhauser, P. Mackenzie-Helnwein, J. Eberhardsteiner:
"A Multi-Surface Plasticity Model for Wood and Stabilization of its Numerical Implementation";
in: "Book of Abstracts, 15th Inter-Institute Seminar for Young Researchers", Department of Structural Mechanics, Budapest University of Technology and Economics, 2005, S. 28.

J. Konnerth, A. Jäger, J. Eberhardsteiner, U. Müller, W. Gindl:
"Wood Adhesive Bondlines by Nanoindentation";
in: "Proceedings of the 13th International Conference on Experimental Mechanics (ICEM 13) - Experimental Analysis of Nano and Engineering Materials and Structures", Springer, 2007, ISBN: 978-1-4020-6238-4, 8 S.

R. Lackner, R. Blab, J. Eberhardsteiner, H.A. Mang:
"Characterization and Multiscale Modeling of Asphalt - Recent Developments in Upscaling of Viscous and Strength Properties";
in: "Proceedings of the 3rd European Conference on Computational Mechanics (ECCM 2006)", C.A. Mota Soares, J.A.C. Martins, H.C. Rodrigues, J.A.C. Ambrosio (Hrg.); Springer, 2006, (eingeladen), ISBN: 1-4020-4978-1, S. 599 - 622.

R. Lackner, A. Jäger, K. Kappl, M. Spiegl, R. Blab, J. Eberhardsteiner:
"Multi-Scale Model for Low-Temperature Creep of Asphalt";
in: "CD-ROM Proceedings of the 21st International Congress of Theoretical and Applied Mechanics (ICTAM04)", W. Gutkowski, T.A. Kowalewski (Hrg.); IUTAM, Warsaw, Poland, 2004, ISBN: 83-89687-01-1, 2 S.

R. Lackner, M. Spiegl, R. Blab, J. Eberhardsteiner:
"Low-Temperature Creep of Bituminous Composites: New Insights from Bending-Beam Experiments";
in: "Proceedings of the 11th European Conference on Composite Materials (ECCM 11)", C. Galiotis (Hrg.); European Society for Composite Materials, 2004, 12 S.

O. Lahayne, J. Eberhardsteiner:
"Investigation of the Temperature Behaviour of Sliding Rubber Materials";
in: "Computer Methods and Experimental Measurements for Surface Effects and Contact Mechanics VIII", WIT Press, 2007, ISBN: 978-1-84564-073-6, S. 155 - 164.

O. Lahayne, J. Eberhardsteiner:
"The Experimental Investigation of Frictional Behaviour of Rubber Materials";
in: "CD-ROM Proceedings of the 12th International Conference on Experimental Mechanics (ICEM12)", C. Pappalettere (Hrg.); EURASEM, 2004, ISBN: 88-386-6273-8, 8 S.

O. Lahayne, J. Eberhardsteiner, Y. G., S. Leonovich, G. Pervushin:
"Nano-Tests on Concrete Samples with and without Nanotubes";
in: "Proceedings of the International Conference on Fracture Mechanics of Concrete, Reinforced Concrete and other Building Materials", Russian Academy of Architecture and Building Sciences, Voronezh, Russia, 2013, ISBN: 978-5-89040-466-4, S. 3 - 13.

O. Lahayne, J. Eberhardsteiner, R. Reihsner:
"Tribological Investigations Using a Linear Friction Tester";
in: "Proceedings of the 25th Danubia-Adria Symposium on Developments in Experimental Mechanics", Powerprint, Praha, 2008, ISBN: 978-80-01-04162-8, S. 141 - 142.

O. Lahayne, L. Zelaya-Lainez, T. Buchner, J. Eberhardsteiner:
"Influence of Nano-Additives on the Elasticity of Cement";
in: "Book of Abstracts of the 37th Danubia Adria Symposium on Advances in Experimental Mechanics", Johannes Kepler University, 2021, ISBN: 978-3-9504997-0-4, S. 16 - 17.

W. Lederer, T. Bader, J. Eberhardsteiner:
"Ductility of the Embedment Behavior of Steel Dowels in Wood - Permanent Deformations and the Influence of Reinforcements";
in: "Book of Abstracts of the 20th Inter-Institute Seminar for Young Researchers", Cracow University of Technology, 2015, ISBN: 978-83-7242-684-0, S. 27.

W. Lederer, T. Bader, J. Eberhardsteiner:
"Experimental Investigations and Numerical Modelling of Dowel Connections in Timber Constructions";
in: "Proceedings of the 2015 Conference of the ASCE Engineering Mechanics Institute (EMI 2015)", American Society of Civil Engineers (ASCE), 2015.

W. Lederer, T. Bader, J. Eberhardsteiner:
"Numerical and Experimental Investigations of the Elasto-Plastic Behaviour of Wood-Steel Dowel Connections";
in: "Book of Abstracts of the 19th Inter-Institute Seminar for Young Researchers", Technische Universität Wien, Institut für Mechanik der Werkstoffe und Strukturen, 2013, ISBN: 978-3-9503537-2-3, S. 29.

W. Lederer, T. Bader, J. Eberhardsteiner:
"Numerical Modelling of Dowel Connections in Timber Constructions";
in: "Proceedings of the XII. International Conference on Computational Plasticity (COMPLAS XII)", International Center for Numerical Methods in Engineering (CIMNE), 2013, ISBN: 978-84-941531-5-0, 1 S.

S. Leonovich, Y. Zaitsev, J. Eberhardsteiner, G. Yakovlev, G. Pervushin:
"The Influence of Multilayed Nano-Tubes on Fracture Toughness";
in: "Proceedings of the International Conference on Fracture Mechanics of Concrete, Reinforced Concrete and other Building Materials", Russian Academy of Architecture and Building Sciences, Voronezh, Russia, 2013, ISBN: 978-5-89040-466-4, S. 14 - 22.

M. Li, J. Füssl, M. Lukacevic, J. Eberhardsteiner:
"Numerical Limit Analysis Approaches for Strength Predictions of Cross-Laminated Timber Plates";
in: "Programme & Book of Abstracts on Computational Methods in Wood Mechanics - from Material Properties to Timber Structures (CompWood 2017)", TU Verlag, Wien, 2017, ISBN: 978-3-903024-49-6, S. 90.

M. Li, J. Füssl, M. Lukacevic, J. Eberhardsteiner, C. Martin:
"A Number Limit Analysis Approach for Predicting Strength of Clear Wood";
in: "CD-ROM Proceedings of the World Conference on Timber Engineering (WCTE 2016)", J. Eberhardsteiner, W. Winter, A. Fadai, M. Pöll (Hrg.); herausgegeben von: Vienna University of Technology; Grafisches Zentrum HTU GmbH, Vienna, 2016, ISBN: 978-3-903039-00-1, Paper-Nr. 90, 10 S.

W. Liu, T. Huemer, J. Eberhardsteiner, H.A. Mang:
"On Algorithmic Stabilization of 2D Contact Analyses by Means of a Modified Node-Smoothing Technique";
in: "5th International Conference on Computational Structures Technology, Finite Elements: Techniques and Developments", B.H.V. Topping (Hrg.); Civil-Comp Press, Edinburgh, 2000, S. 249 - 256.

W. Liu, T. Huemer, J. Eberhardsteiner, H.A. Mang:
"On Friction Behavior of Rubber on Concrete Surfaces";
in: "Proceedings of the 5th International Conference on Computational Methods in Contact Mechanics", J. Dominguez, C.A. Brebbia (Hrg.); WIT Press, Southampton, 2001, S. 55 - 64.

K. Luczynski, A. Steiger-Thirsfeld, J. Bernardi, J. Eberhardsteiner, Ch. Hellmich:
"Homogeneous Compression of Non-Tapered Single Micron-Sized Bone Pillars Welded to a Rigid Substrate";
in: "Proceedings of the 22nd Congress of the European Society of Biomechanics", European Society of Biomechanics, 2016, Paper-Nr. 902, 1 S.

M. Lukacevic, K. de Borst, J. Füssl, J. Eberhardsteiner:
"Influence of Different Knot Groups on Effective Mechanical Properties of Solid-Wood Based Products Determined by Means of 3D Finite-Element Simulations";
in: "Book of Abstracts - 8th European Solid Mechanics Conference (ESMC 2012)", herausgegeben von: TU Graz; TU Graz, 2012, ISBN: 978-3-85125-223-1, 2 S.

M. Lukacevic, J. Füssl, J. Eberhardsteiner:
"A Microstructure-Based Multisurface Failure Criterion for the Description of Brittle and Ductile Failure Mechanisms of Clear-Wood";
in: "Programme & Book of Abstracts on Computational Methods in Wood Mechanics - from Material Properties to Timber Structures (CompWood 2017)", TU Verlag, Wien, 2017, ISBN: 978-3-903024-49-6, S. 28.

M. Lukacevic, J. Füssl, J. Eberhardsteiner:
"A Numerical Approach to Describe Failure of Wood - From the Wood Cell Level up to Wood-Based Products";
in: "Proceedings of the 2015 Conference of the ASCE Engineering Mechanics Institute (EMI 2015)", American Society of Civil Engineers (ASCE), 2015.

M. Lukacevic, J. Füssl, J. Eberhardsteiner:
"A Numerical Approach to Describe Failure of Wood - From the Wood Cell Level Up to Wood-Based Products";
in: "CD-ROM Proceedings of the World Conference on Timber Engineering (WCTE 2016)", J. Eberhardsteiner, W. Winter, A. Fadai, M. Pöll (Hrg.); herausgegeben von: Vienna University of Technology; Grafisches Zentrum HTU GmbH, Vienna, 2016, ISBN: 978-3-903039-00-1, Paper-Nr. 306, 9 S.

M. Lukacevic, J. Füssl, J. Eberhardsteiner:
"Influence of Knot Groups on Effective Mechanical Properties of Solid - Wood Based Products Determined by Means of 3D Finite - Element Simulations";
in: "Proceedings of the XII. International Conference on Computational Plasticity (COMPLAS XII)", International Center for Numerical Methods in Engineering (CIMNE), 2013, ISBN: 978-84-941531-5-0, 1 S.

M. Lukacevic, J. Füssl, J. Eberhardsteiner:
"Simulating Failure Mechanisms in Wooden Boards with Knots by Means of a Microstructure-Based Multisurface Failure Criterion";
in: "Proceedings of the 2018 World Conference on Timber Engineering (WCTE 2018)", The Korean Society of Wood Science Technology, 2018, 8 S.

P. Mackenzie-Helnwein, J. Eberhardsteiner:
"Modeling Clear Softwood by Mapping Micromechanical Failure Mechanisms to a Multi-surface Plasticity Model";
in: "Book of Abstracts of the 4th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2004)", ECCOMAS, 2004, ISBN: 951-39-1867-x, S. 63.

P. Mackenzie-Helnwein, J. Eberhardsteiner, H.A. Mang:
"Multi-Surface Plasticity of Clear Spruce Wood";
in: "CD-ROM Proceedings of the 7th International Conference on Computational Plasticity (COMPLAS 2003)", E. Onate, D.R.J. Owen (Hrg.); CIMNE, Barcelona, 2003, ISBN: 84-95999-22-6, 23 S.

H.A. Mang, E. Aigner, J. Eberhardsteiner, C. Hackspiel, Ch. Hellmich, K. Hofstetter, R. Lackner, B. Pichler, St. Scheiner, R. Stürzenbecher:
"Computational Multiscale Analysis in Civil Engineering";
in: "The Eleventh East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-11)", D & E Drawing and Editing Services Company, Taipei, Taiwan, 2008, (eingeladen), ISBN: 978-986-80222-4-9, S. 3 - 14.

H.A. Mang, J. Eberhardsteiner:
"Finite-Elemente Berechnungen im Stahlbetonbau";
in: "Konferenzbericht der Tagung "Mechanik und Industrie"", G.I. Schueller (Hrg.); Institut für Mechanik, Universität Innsbruck, 1985, S. 153 - 169.

H.A. Mang, J. Eberhardsteiner, Ch. Hellmich, K. Hofstetter, A. Jäger, R. Lackner, K. Meinhard, H.W. Müllner, B. Pichler, Ch. Pichler, R. Reihsner, M. Zeiml:
"Computational Mechanics of Materials and Structures";
in: "Proceedings of the Czech-Argentine Biennale Workshop "e-Golems" - Interdisciplinary Aspects of Human-Machine Co-existence and Co-operation", V. Marik, P. Jacovkis, O. Stepankova, J. Klema (Hrg.); Czech Technical University in Prague, 2005, ISBN: 80-01-03275-2, S. 152 - 164.

H.A. Mang, J. Eberhardsteiner, Ch. Hellmich, K. Hofstetter, R. Lackner:
"Computational Multiscale Analysis in Civil Engineering";
in: "Proceedings of the 8th World Congress on Computational Mechanics (WCCM8) and the 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008)", B. Schrefler, U. Perego (Hrg.); CIMNE, 2008, (eingeladen), ISBN: 978-84-96736-55-9, 2 S.

H.A. Mang, J. Eberhardsteiner, R. Lackner, P. Mackenzie-Helnwein, Ch. Pichler:
"Constitutive Modeling and Computational Mechanics of Wood and Cement-Based Materials";
in: "CD-ROM Proceedings of the 9th International Conference on Numerical Methods in Continuum Mechanics (NMCM 2003)", V. Kompis, J. Sladek, M. Zmindak (Hrg.); Society for Science and Engineering, Zilina, Slovak Republic, 2003, ISBN: 80-968823-4-1, 24 S.

H.A. Mang, J. Eberhardsteiner, R. Lackner, P. Mackenzie-Helnwein, Ch. Pichler:
"Constitutive Modeling and Computational Mechanics of Wood and Cement-Based Materials";
in: "Proceedings of the 1st Symposium Computing in Engineering", Faculty of Civil Engineering, University of Zagreb, 2003, ISBN: 953-6272-11-3, S. 5 - 6.

H.A. Mang, J. Eberhardsteiner, H. Walter:
"Development and Application of a Gradient-Dependent Fracture Criterion for Finite-Element Analysis of RC Surface Structures";
in: "Proceedings of the Europe-US Symposium on Finite Element Methods for Nonlinear Problems", P.G. Bergan, K.J. Bathe, W. Wunderlich (Hrg.); Springer, 1986, S. 603 - 621.

H.A. Mang, J. Eberhardsteiner, H. Walter:
"On a Nonlocal Strength Criterion for Concrete and its Application to Ultimate Load Analysis of Reinforced Concrete Shells by the Finite Element Method";
in: "Proceedings of the IUTAM-Symposium on Inelastic Behavior of Plates and Shells", L. Bevilacqua, R. Feijóo, R. Valid (Hrg.); Springer, Berlin, 1985, S. 453 - 472.

H.A. Mang, G. Höfinger, X. Jia, K. Hofstetter, T. Bader, J. Eitelberger, B. Pichler, St. Scheiner, S. Ullah, M. Zeiml, A. Amouzandeh, T. Ring, J. Eberhardsteiner, Ch. Hellmich:
"Computational Civil Engineering Mechanics - Elucidating General Features of Materials and Structures";
in: "Proceedings of the First International Conference on Advances in Interaction and Multiscale Mechanics (AIMM'10)", Techno-Press, Korea, 2010, (eingeladen), ISBN 89-89693-28-4-98530, 19 S.

H.W. Müllner, J. Eberhardsteiner:
"Constitutive Characterisation of Rubber Blends by Means of Capillary-Viscometry";
in: "Book of Abstracts, 15th Inter-Institute Seminar for Young Researchers", Department of Structural Mechanics, Budapest University of Technology and Economics, 2005, S. 35.

H.W. Müllner, J. Eberhardsteiner, W. Fidi:
"Rheological Characterisation of the Die Swell Phenomena of Rubber Blends by means of Numerical Simulation";
in: "Deutsche Kautschuk-Tagung 2006", Deutsche Kautschuk-Gesellschaft e.V., Nuremberg, 2006, S. 25 - 29.

H.W. Müllner, J. Eberhardsteiner, G. Heinrich:
"Numerisches Vorhersagemodell für die Auslegung von Spritzköpfen und Werkzeugen für den Extrusionsprozess von Gummi";
in: "Technomer 2007 Fachbeiträge", Technische Universität Chemnitz, 2007, ISBN: 978-3939382-08-9, 14 S.

H.W. Müllner, J. Eberhardsteiner, K. Hofstetter:
"Viscosity Characterisation for Rubber Blends from Die Swell Data";
in: "Book of Abstracts of the 77th Annual Meeting of the GAMM", V. Mehrmann, C.O. Paschereit, W.H. Müller, U. von Wagner, C. Mehl (Hrg.); Technische Universität Berlin, 2006, S. 334.

H.W. Müllner, J. Eberhardsteiner, P. Mackenzie-Helnwein:
"Konstitutives Modellieren von Fichtenholz unter biaxialer Beanspruchung mittels eines orthotropen Einflächenmodells unter Berücksichtigung von Ver- und Entfestigung";
in: "Book of Abstracts of the 75th Annual Meeting of the GAMM", H.-J. Hardtke, A. Griewank (Hrg.); Technische Universität Dresden, 2004, S. 95 - 96.

H.W. Müllner, J. Eberhardsteiner, H.A. Mang:
"Finite Element Analysis of Layered Wooden Shells Under Application of an Orthotropic Single-Surface Plasticity Model";
in: "Proceedings of the 8th Conference "Shell Structures: Theory and Application"", W. Pietraszkiewicz, C. Szymczak (Hrg.); Taylor & Francis Group, 2005, ISBN: 0415383900, S. 487 - 491.

H.W. Müllner, J. Eberhardsteiner, A. Wieczorek:
"Back Calculation of the End Pressure of Circular Capillaries by Means of Measurements of Slit Capillaries";
in: "Book of Abstracts of the 3rd Annual European Rheology Conference", European Society of Rheology, 2006, S. 75.

H.W. Müllner, J. Eberhardsteiner, A. Wieczorek:
"Constitutive Characterisation of Rubber Blends by Means of Genetic Algorithms";
in: "Constitutive Models for Rubber IV", P.-E. Austrell, L. Kari (Hrg.); Taylor & Francis Group, 2005, ISBN: 0-415-38346-3, S. 361 - 368.

H.W. Müllner, J. Eberhardsteiner, A. Wieczorek:
"Experimental Investigation and Identification of Material Parameters for Rubber Blends";
in: "Proceedings of the 22nd Danubia-Adria Symposium on Experimental Methods in Solid Mechanics", G. Nicoletto (Hrg.); Italian Association for Stress Analysis, 2005, ISBN: 3-9501554-3-0, Paper-Nr. 104, 2 S.

H.W. Müllner, J. Eberhardsteiner, A. Wieczorek:
"Konstitutive Charakterisierung von Kautschukmischungen mit dem Hochdruckkapillarviskosimeter";
in: "Book of Abstracts of the 76th Annual Meeting of the GAMM", M. Schlather, M. Malvetti (Hrg.); Université du Luxembourg, 2005, S. 189 - 190.

H.W. Müllner, J. Eberhardsteiner, A. Wieczorek, S. Seiler:
"Constitutive Characterization of Extruded Rubber Blends by Means of an Extrusion Rheometer";
in: "Constitutive Models for Rubber V - Proceedings of the 5th European Conference on Constitutive Models for Rubber (ECCMR 2007)", Taylor & Francis Group, 2007, ISBN: 978-0-415-45442-1, S. 425 - 431.

H.W. Müllner, M. Fleischmann, J. Eberhardsteiner:
"Experimental Validation of an Orthotropic Single-Surface Plasticity Model for Spruce Wood";
in: "Proceedings of the International Conference on Integrated Approach to Wood Structure, Behaviour and Applications", M. Fioravanti, N. Macchioni (Hrg.); ESWM & COST Action E35, 2006, ISBN: 978-88-901660-2-0, S. 236 - 241.

H.W. Müllner, M. Fleischmann, J. Eberhardsteiner:
"Orthotropic Single-Surface Plasticity Model for Spruce Wood including the Effect of Knots";
in: "Abstracts of the 1st Workshop for COST Action E35", G. Sinn (Hrg.); BOKU, Vienna, 2004, S. 27 - 28.

H.W. Müllner, M. Fleischmann, Ch. Kohlhauser, J. Eberhardsteiner:
"Influence of the Characteristic Length on the Strength Properties of a Material Model for Spruce Wood";
in: "Abstracts of the 2nd Workshop for COST Action E35", R. Marchal (Hrg.); ENSAM, Cluny, 2004, S. 15 - 17.

H.W. Müllner, A. Jäger, J. Eberhardsteiner:
"Experimental Identification of Viscoelastic Properties of Rubber Blends by Means of a Torsional Rheometer";
in: "Book of Abstracts of the 23rd Danubia-Adria Symposium on Experimental Methods in Solid Mechanics", O. Bokuvka (Hrg.); University Zilina, 2006, ISBN: 80-8070-589-5, S. 181 - 182.

H.W. Müllner, S. Koch, J. Eberhardsteiner:
"Influence of Crystallization and Filler Degree on Viscoelastic Properties of Rubber Compounds";
in: "AERC 2007 4th Annual European Rheology Conference Book of Abstract", European Society of Rheology, 2007, S. 269.

H.W. Müllner, S. Koch, A. Wieczorek, J. Eberhardsteiner:
"Constitutive Analysis of Rubber Compounds with Varying Molecular Structure";
in: "24th Danubia-Adria Symposium on Developments in Experimental Mechanics", "Lucian Blaga" - University of Sibiu, 2007, ISBN: 978-973-739-456-9, S. 235 - 236.

H.W. Müllner, P. Mackenzie-Helnwein, J. Eberhardsteiner:
"Constitutive Modelling of Biaxially Stressed Wood for the Analysis of Layered Wooden Shells";
in: "Pre-Proceedings of the 3rd International Conference of the European Society for Wood Mechanics", J. Morais, P. Morlier (Hrg.); UTAD, Vila Real, 2004, S. 277 - 284.

H.W. Müllner, P. Mackenzie-Helnwein, J. Eberhardsteiner:
"Constitutive Modelling of Biaxially Stressed Wood for the Analysis of Layered Wooden Shells";
in: "Proceedings of the Third International Conference of the European Society for Wood Mechanics", P. Morlier, J. Morais, N. Dourado (Hrg.); UTAD, 2006, ISBN: 972-669-743-3, S. 255 - 262.

H.W. Müllner, P. Mackenzie-Helnwein, J. Eberhardsteiner:
"Constitutive Modelling of Clear Spruce Wood under Biaxial Loading by Means of an Orthotropic Single-Surface Model under Consideration of Hardening and Softening Mechanisms";
in: "Proceedings of the 2nd International Symposium on Wood Machining", S.E. Stanzl-Tschegg, M. Gindl, G. Sinn (Hrg.); BOKU, Vienna, 2004, ISBN: 3-9501315-2-3, S. 83 - 90.

H.W. Müllner, A. Wieczorek, J. Eberhardsteiner:
"Numerical Prediction of the Dimensioning of Tools for the Extrusion Process of Rubber Profiles";
in: "10th ESAFORM Conference on Material Forming", American Institute of Physics, 2007, ISBN: 978-0-7354-0414-4, 6 S.

H.W. Müllner, A. Wieczorek, W. Fidi, J. Eberhardsteiner:
"Advances in Numerical Prediction of Extrusion Tools used for Fabrication of Rubber Profiles";
in: "CD of Abstracts of the 79th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2008)", Universität Bremen, 2008, 1 S.

H.W. Müllner, A. Wieczorek, W. Fidi, J. Eberhardsteiner:
"Numerical Dimensioning Model for Injection Heads and Tools Used for Rubber Extrusion";
in: "Book of Abstracts, 16th Inter-Institute Seminar for Young Researchers", TU Wien, 2007, ISBN: 3-9501554-9-x, S. 36.

H.W. Müllner, A. Wieczorek, B. Manninger, J. Eberhardsteiner:
"Characteristics of Shear Viscosity during Extrusion of Rubber Blends";
in: "24th Danubia-Adria Symposium on Developments in Experimental Mechanics", "Lucian Blaga" - University of Sibiu, 2007, ISBN: 978-973-739-456-9, S. 237 - 238.

H.W. Müllner, A. Wieczorek, P.I. Petracek, J. Eberhardsteiner:
"Experimental Validation of a Visco-Elastic Material Model for Numerical Simulation of the Extrusion Process of Rubber Blends";
in: "Program and Abstract Book ICIAM 07 - CD-ROM Proceedings", ETH Zürich and University of Zürich, 2007, 1 S.

T. Müllner, W. Menth-Chiari, L. Engebretsen, R. Reihsner, J. Eberhardsteiner, V. Vécsei:
"Accuracy of Arthroscopic Fluid Management Systems";
in: "Book of Abstracts, ESSKA 2000 - 9th Congress of the European Society of Sports Traumatology, Knee Surgery and Arthoscopy", European Society of Sports Traumatology, Knee Surgery and Arthoscopy, London, UK, 2000, S. 275.

B. Pichler, Ch. Hellmich, L. Dormieux, J. Sanahuja, J. Eberhardsteiner:
"Early-Age Strength of Cementitious Materials: A Continuum Micromechanics Approach";
in: "Proceedings of ECCOMAS Thematic Conference on Computational Methods in Tunnelling (EURO:TUN 2007)", Eigenverlag, 2007, ISBN: 978-3-9501554-7-1, 6 S.

B. Pichler, Ch. Hellmich, J. Eberhardsteiner:
"Compressive Strength Evolution in Early-Age Portland Cement Paste Predicted by a Micromechanical Model";
in: "Proceedings of the International RILEM Symposium on Concrete Modelling (CONMOD 08)", RILEM, 2008, ISBN: 978-2-35158-060-8, S. 139 - 146.

B. Pichler, Ch. Hellmich, J. Eberhardsteiner:
"Strength of Geomaterials: Multiscale Theories and Experiments at Appropriate Problem-Dependent Length Scales";
in: "Proceedings of the International Workshop on Multiscale and Multiphysics Processes in Geomechanics", Stanford University, USA, 2010, (eingeladen), S. 1 - 4.

B. Pichler, Ch. Hellmich, J. Eberhardsteiner, P. Termkhajornkit, R. Barbarulo, G. Chanvillard:
"Macroscopic Strength Evolution of Cementitious Materials: a Micromechanics Approach Using Gel-Space Ratio";
in: "Proceedings of the 2012 Joint Conference of the Engineering Mechanics Institute and the 11th ASCE Joint Sepcialty Conference on Probabilistic Mechanics and Structural Reliability (EMI/PMC 2012)", American Society of Civil Engineers (ASCE), Reston, USA, 2012.

B. Pichler, Ch. Hellmich, J. Eberhardsteiner, P. Termkhajornkit, R. Barbarulo, G. Chanvillard:
"Quasi-Brittle Strength Evolution of Hydrating Cementitious Materials Revisited in the Framework of Gel-Space Ratio: Experiments and Continuum Micromechanics Predictions";
in: "Proceedings of 2nd Advances in Cement-Based Materials: Characterization, Processing, Modeling and Sensing", The American Ceramic Society, Nashville, 2011, S. 1.

B. Pichler, Ch. Hellmich, J. Eberhardsteiner, J. Wasserbauer, P. Termkhajornkit, R. Barbarulo, G. Chanvillard:
"How Do Microstructural Properties Govern the Strength of Cementitious Materials? A Multiscale Approach Based on Gel-Space Ratio";
in: "Proceedings of the XII. International Conference on Computational Plasticity (COMPLAS XII)", International Center for Numerical Methods in Engineering (CIMNE), 2013, ISBN: 978-84-941531-5-0, 1 S.

B. Pichler, Ch. Hellmich, J. Eberhardsteiner, J. Wasserbauer, P. Termkhajornkit, R. Barbarulo, G. Chanvillard:
"Strength Evolution of Hydrating Cement Pasted: The Counteracting Effects of Capillary Porosity and Unhydrated Clinker Reinforcements";
in: "Proceedings of the Fifth Biot Conference on Poromechanics (in Memory of Karl von Terzaghi, 1883-1963)", Ch. Hellmich, B. Pichler, D. Adam (Hrg.); American Society of Civil Engineers (ASCE), Reston, VA, USA, 2013, ISBN: 978-0-7844-1299-2, S. 1837 - 1846.

B. Pichler, Ch. Hellmich, J. Eberhardsteiner, J. Wasserbauer, P. Termkhajornkit, R. Barbarulo, G. Chanvillard:
"The Counteracting Effects of Capillary Porosity and of Unhydrated Clinker Grains on the Macroscopic Strength of Hydrating Cement Paste: A Multiscale Model";
in: "Proceedings of the Ninth International Conference on Creep, Shrinkage, and Durability Mechanics (CONCREEP-9)", American Society of Civil Engineers (ASCE), Reston, VA, USA, 2013, ISBN: 978-0-7844-1311-1, S. 40 - 47.

B. Pichler, Ch. Hellmich, H.A. Mang, J. Eberhardsteiner:
"Gravel-buried Steel Pipelines Subjected to Rockfall: Corroboration of Modeling Approaches by Experiments";
in: "Book of Abstracts of the Workshop "Challenges in Computational Mechanics"", O. Allix, N. Moes, U. Perego (Hrg.); LMT Cachan, 2006, S. 83 - 84.

B. Pichler, Ch. Hellmich, St. Scheiner, J. Eberhardsteiner, H.A. Mang:
"Assessment of Protection Systems for Gravel-Buried Pipelines Considering Impact and Recurrent Shear Loading Caused by Thermal Deformations of the Pipe";
in: "Proceedings of the 8th International Conference on Computational Plasticity (COMPLAS VIII)", D.R.J. Owen, E. Onate, B. Suarez (Hrg.); CIMNE, 2005, ISBN: 84-95999-80-3, S. 35 - 38.

B. Pichler, St. Scheiner, Ch. Hellmich, J. Eberhardsteiner:
"Micromechanics-based Models for Elasticity and Strength of Shotcrete, for Hybrid Analyses of NATM Tunnel Shells";
in: "Computational Methods in Tunnelling - EURO:TUN 2009", G. Meschke, G. Beer, J. Eberhardsteiner, D. Hartmann, M. Thewes (Hrg.); Aedificatio Publishers, 2009, ISBN: 978-3-931681-94-4, S. 431 - 436.

B. Pichler, St. Scheiner, O. Rio, L. Fernandez-Luco, A. Castillo, Ch. Hellmich, J. Eberhardsteiner:
"Shotcrete at Early Ages: Comparison of Test Results with a Thermo-Chemo-Micromechanics Based Model for Shotcrete";
in: "Proceedings of ECCOMAS Thematic Conference on Computational Methods in Tunnelling (EURO:TUN 2007)", Eigenverlag, 2007, ISBN: 978-3-9501554-7-1, 11 S.

B. Pichler, S. Ullah, Ch. Hellmich, J. Eberhardsteiner:
"Load Carrying Behavior of Young Shotcrete Top Heading Tunnel Shells";
in: "Proceedong of the International Scientific Conference on Technology of Construction and Reconstruction (TCR 2013)", Belarussische Nationale Technische Universität, 2013, ISBN: 978-985-550-673-8, S. 35 - 43.

B. Pichler, S. Ullah, Ch. Hellmich, J. Eberhardsteiner:
"Tragverhalten junger Tunnelkalottenschalen aus Spritzbeton";
in: "17. Dresdner Baustatik-Seminar, 2013", Technische Universität Dresden, 2013, ISSN: 1615-9705, S. 109 - 125.

Ch. Pichler, A. Jäger, R. Lackner, J. Eberhardsteiner:
"Identification of Material Properties from Nanoindentation: Application to Bitumen and Cement Paste";
in: "Proceedings of the 22nd Danubia-Adria Symposium on Experimental Methods in Solid Mechanics", G. Nicoletto (Hrg.); Italian Association for Stress Analysis, 2005, ISBN: 3-9501554-3-0, Paper-Nr. 114, 2 S.

E. Polonina, O. Lahayne, J. Eberhardsteiner, S. Leonovich:
"Nanoindentation of Cement Stone Samples";
in: "Proceedings of the The 2020 International Conference on Building Energy Conservation, Thermal Safety and Environmental Pollution Control (ICBTE 2020)", 212; EDP Sciences, 2020, Paper-Nr. 02013, 8 S.

H. Rattensperger, J. Eberhardsteiner, H.A. Mang:
"Constitutive Modelling of Woven Textile Reinforcements and its Application to High-Pressure Hydraulic Hoses";
in: "Proceedings of the 9th International Conference on Enhancement and Promotion of Computational Methods in Engineering and Science (EPMESC IX)", V.P. Iu, L.N. Lamas, Y.-P. Li, K.M. Mok (Hrg.); Balkema, 2003, ISBN: 9058095673, S. 105 - 114.

H. Rattensperger, J. Eberhardsteiner, H.A. Mang:
"Numerical Investigation of High Pressure Hydraulic Hoses with Steel Wire Braid";
in: "Proceedings of the IUTAM Symposium on Solid Materials at Large Strains", Kluwer Academic Publishers, Dordrecht, 2003, ISBN: 1-4020-1170-9, S. 407 - 416.

H. Rattensperger, J. Eberhardsteiner, H.A. Mang:
"Numerical Representation of Woven Reinforcements in Hydraulic Hoses";
in: "Book of Abstracts of the 4th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2004)", ECCOMAS, 2004, ISBN: 951-39-1867-x, S. 67.

H. Rattensperger, J. Eberhardsteiner, H.A. Mang:
"Numerical Simulation of Fabric Reinforced Hydraulic Hoses";
in: "Extended Abstracts of the 4th International Congress of Croatian Society of Mechanics (4th ICCSM)", F. Matejicek (Hrg.); Croatian Society of Mechanics, 2003, ISBN: 953-96243-4-7, S. 11 - 19.

R. Reihsner, B. Kriegleder, P. Kochova, P. Heuberer, W. Anderl, J. Eberhardsteiner:
"The Stability of Tendon Fixation to Bone in Surgery";
in: "Book of Abstracts of the 23rd Danubia-Adria Symposium on Experimental Methods in Solid Mechanics", O. Bokuvka (Hrg.); University Zilina, 2006, ISBN: 80-8070-589-5, S. 125 - 126.

T. Ring, M. Zeiml, R. Lackner, J. Eberhardsteiner:
"Large-Scale Fire Tests on Concrete - Design and Results";
in: "Proceedings of the 28th Danubia-Adria-Symposium", Hungarian Scientific Society for Mechanical Engineering (GTE), Budapest, 2011, (eingeladen), ISBN: 978-963-9058-32-3, S. 195 - 196.

T. Schlappal, J. Kalliauer, S. Gmainer, M. Vill, J. Eberhardsteiner, H.A. Mang, B. Pichler:
"Concrete Hinges: Experiments, Simulations, and Design Considerations";
in: "Book of Abstracts of the 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019)", TU Verlag, 2019, ISBN: 978-3-903024-84-7, S. 152.

T. Schlappal, J. Kalliauer, M. Schweigler, S. Gmainer, M. Vill, J. Eberhardsteiner, H.A. Mang, B. Pichler:
"Structural Mechanics of Reinforced Concrete Hinges: From Laboratory Testing to Design Recommendations";
in: "Programme & Book of Abstracts of the International Symposium on Interdisciplinary Research in Civil Engineering Sciences (IS-IRCES)", Technische Universität Wien, 2021, S. 15.

T. Schlappal, J. Kalliauer, M. Schweigler, S. Gmainer, M. Vill, M. Peyerl, H.A. Mang, B. Pichler, J. Eberhardsteiner:
"Concrete Hinges: Laboratory Testing, Finite Element Analysis, Design Recommendations";
in: "Book of Abstracts of the 37th Danubia Adria Symposium on Advances in Experimental Mechanics", Johannes Kepler University, 2021, (eingeladen), ISBN: 978-3-9504997-0-4, S. 92 - 93.

T. Schlappal, J. Kalliauer, M. Vill, S. Gmainer, H.A. Mang, J. Eberhardsteiner, B. Pichler:
"Serviceability Limits of Reinforced Concrete Hings";
in: "Programme & Proceedings of the China-Austria Forum for Postgraduates of Civil Engineering", Vienna University of Technology, 2019, S. 114 - 117.

T. Schlappal, M. Schweigler, R. Reihsner, W. Dörner, J. Eberhardsteiner, B. Pichler:
"Structural Behavior of an Eccentrically Compressed Concrete Hinge";
in: "Proceedings of the 32nd Danubia-Adria-Symposium (DAS 32)", EDIS Zilinska Univerzita v Ziline, 2015, ISBN: 978-80-554-1094-4.

M. Schweigler, T. Bader, J. Eberhardsteiner:
"Load Direction Dependency of the Embedment Behaviour of Dowel-Type Fasteners in Laminated Veneer Lumber";
in: "Proceedings of the 16th International Conference on Experimental Mechanics (ICEM16)", University of Cambridge, 2014, S. 1 - 2.

M. Schweigler, T. Bader, J. Eberhardsteiner:
"The Influence of Displacement Boundary Conditions on the Embedment Behavior of Dowel-Type Fasteners";
in: "Proceedings of the 33rd Danubia-Adria Symposium on Advances in Experimental Mechanics", Slovenian Society of Experimental Mechanics, 2016, ISBN: 978-961-94081-0-0, S. 44 - 45.

M. Schweigler, T. Bader, G. Hochreiner, J. Eberhardsteiner:
"A Novel Approach for the Load-Displacement Behavior of Single-Dowel Connections in Laminated Veneer Lumber";
in: "Proceedings of the 17th International Conference on Experimental Mechanics (ICEM17)", European Society for Experimental Mechanics, 2016.

M. Schweigler, T. Bader, G. Hochreiner, J. Eberhardsteiner:
"An Engineering Modeling Approach for the Nonlinear Load-Displacement Behavior of Single Dowel Connections - Parameter Study";
in: "CD-ROM Proceedings of the World Conference on Timber Engineering (WCTE 2016)", J. Eberhardsteiner, W. Winter, A. Fadai, M. Pöll (Hrg.); herausgegeben von: Vienna University of Technology; Grafisches Zentrum HTU GmbH, Vienna, 2016, ISBN: 978-3-903039-00-1, Paper-Nr. 755, 10 S.

M. Schweigler, T. Bader, G. Hochreiner, J. Eberhardsteiner:
"Ein baustatischer Modellierungsansatz für das Last-Verformungsverhalten von Stabdübelgruppen im Ingenieurholzbau";
in: "Berichte des Doktorandenkolloquium Holzbau Forschung + Praxis", Universität Stuttgart, 2014, S. 157 - 164.

M. Schweigler, T. Bader, G. Hochreiner, J. Eberhardsteiner:
"Experimental Characterization of Dowel Connections beyond the Elastic Domain";
in: "Proceedings of the 32nd Danubia-Adria-Symposium (DAS 32)", Universität in Zilina, 2015, ISBN: 978-80-554-1094-4, S. 62 - 63.

M. Schweigler, T. Bader, G. Hochreiner, J. Eberhardsteiner:
"Load-Deformation Behavior of Single Dowel Connections in Timber Structures";
in: "Book of Abstracts of 1st Vienna Young Scientists Symposium", TU Wien, 2015, ISBN: 978-3-9504017-0-7, S. 166 - 167.

J. Sladek, V. Sladek, Ch. Hellmich, J. Eberhardsteiner:
"Analysis of Thick Functionally Graded Plates by Local Integral Equation Method";
in: "Proceedings of the International Conference on Boundary Element Techniques (BeTec 06)", University of Naples "Federico II", 2006, S. 1 - 6.

J. Sladek, V. Sladek, Ch. Hellmich, J. Eberhardsteiner:
"Meshless Local Petrov-Galerkin Method for Heat Conduction Problem in 3D Axisymmetric and Anisotropic FGM Bodies";
in: "Proceedings of 3rd International Workshop "Meshfree Methods for Partial Differential Equations"", T. Belytschko, I. Babuska, M. Griebel, W. Liu, H. Neunzert, H. Yserentant (Hrg.); Rheinische Friedrich-Wilhelms-Universität Bonn, Bonn, Germany, 2005, Paper-Nr. 19-20, 2 S.

R. Stürzenbecher, K. Hofstetter, T. Bogensperger, G. Schickhofer, J. Eberhardsteiner:
"Multiscale Modeling of Engineered Wood Products by Means of Continuum Micromechanics and Lamination Theory: Model Development and Experimental Validation";
in: "Proceedings of the Conference on Computational Modeling and Experiments of the Composite Materials with Micro- and Nano-Structure (CMNS 2007)", V. Kompis, M. Zmindak, P. Lisy (Hrg.); ECCOMAS, 2007, ISBN: 978-80-8040-321-8, 15 S.

R. Stürzenbecher, K. Hofstetter, J. Eberhardsteiner:
"Cross Laminated Timber: A Multi-Layer, Shear Compliant Plate and its Mechanical Behavior";
in: "Proceedings of ther World Conference on Timber Engineering", CNR-IVALSA, 2010.

R. Stürzenbecher, K. Hofstetter, J. Eberhardsteiner:
"Höhere Plattentheorien für die Bemessung von Brettsperrholz, einem mehrschichtigen schubnachgiebigen Plattenwerkstoff";
in: "Berichte der Fachtagung Baustatik-Baupraxis 11", G. Beer, C. Dünser, G. Hofstetter, Y. Theiner (Hrg.); herausgegeben von: Institut für Baustatik, Technische Universität Graz; TU Graz, Graz, 2011, (eingeladen), ISBN: 978-3-85125-115-9, S. 387 - 395.

R. Stürzenbecher, K. Hofstetter, J. Eberhardsteiner:
"Multiscale Approach to the Elasticity of Engineered Wood Products";
in: "Book of Abstracts, 16th Inter-Institute Seminar for Young Researchers", TU Wien, 2007, ISBN: 3-9501554-9-x, S. 31.

R. Stürzenbecher, K. Hofstetter, G. Schickhofer, J. Eberhardsteiner:
"Modeling Anisotropic Elasticity of Multi-Layer Engineered Wood Products";
in: "CD-ROM Proceedings of the 8th World Congress on Computational Mechanics (WCCM 8) and the 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008)", CIMNE, 2008, ISBN: 978-84-96736-55-9, 2 S.

R. Stürzenbecher, K. Hofstetter, G. Schickhofer, J. Eberhardsteiner:
"Predicting Stiffness Properties of Engineered Wood Products by Means of Continuum Micromechanics";
in: "Program/Book of Abstracts of the 2nd GACM Colloquium on Computational Mechanics", Technische Universität München, 2007, S. 67.

L. Wagner, T. Bader, K. de Borst, J. Eberhardsteiner:
"Nanoindentation to Study Within-Tree Variability of Wood Cell Wall Stiffness";
in: "Proceedings of the 29th Danubia-Adria-Symposium (DAS 29)", M. Ognjanovic (Hrg.); University of Belgrade, Belgrade, 2012, ISBN: 978-86-7083-762-1, S. 8 - 9.

L. Wagner, T. Bader, J. Eberhardsteiner, K. de Borst:
"Consequences of Microbial Decay on Mechanical Properties of Wood Cell Walls";
in: "Proceedings of the 2015 Conference of the ASCE Engineering Mechanics Institute (EMI 2015)", American Society of Civil Engineers (ASCE), 2015, 1 S.

L. Wagner, C. Bos, T. Bader, J. Eberhardsteiner:
"Moisture-Dependent Mechanical Properties of Softwood and Hardwood Cell walls: A Nanoindentation Study";
in: "Book of Abstracts of the 16th International Conference on Experimental Mechanics (ICEM16)", British Society for Strain Measurement (BSSM), 2014.

L. Wagner, C. Bos, T. Bader, J. Eberhardsteiner:
"Moisture-Dependent Mechanical Properties of Softwood and Hardwood Cell Walls: A Nanoindentation Study";
in: "Proceedings of the 31st Danubia-Adria Symposium on Advances in Experimental Mechanics", VDI Verein Deutscher Ingenieure e.V., Düsseldorf, 2014, ISBN: 978-3-00-046740-0, S. 151 - 152.

C. Wikete, T. Bader, A. Jäger, K. Hofstetter, J. Eberhardsteiner:
"Mechanical Properties and Microstructural Characteristics of Hardwood";
in: "Proceedings of the 27th Danubia-Adria Symposium on Advances in Experimental Mechanics", Wroclaw University of Technology, Wroclaw, 2010, ISBN: 978-83-87982-59-1, S. 237 - 238.


Vorträge und Posterpräsentationen (mit Tagungsband-Eintrag)


M. Lukacevic, J. Füssl, S. Pech, C. Vida, J. Eberhardsteiner:
"Computational Mechanics Concepts for Wood-Based Products and Timber Structural Elements";
Vortrag: World Conference on Timber Engineering (WCTE2021), Santiago, Chile; 09.08.2021 - 12.08.2021; in: "Proceedings of WCTE 2021 - World Conference on Timber Engineering", Santiago, Chile (2021).


Vorträge und Posterpräsentationen (ohne Tagungsband-Eintrag)


R. Beer, J. Eberhardsteiner, F. Pulay, R. Reihsner:
"Biaxial Testing of Anisotropic Materials";
Poster: 8th Danubia-Adria Symposium on Experimental Methods in Solid Mechanics, Gödöllo, Ungarn; 11.10.1991 - 12.10.1991.

R. Beer, J. Kodvanj, J. Eberhardsteiner, W. Grienauer, G. Skrbensky, F. Gottsauner-Wolf:
"Medical and Mechanical Aspects of an Implant-Bone-Connection in the Femur: A Three-Dimensional Photoelastic Study of the Load Transfer Mechanism Using Gamma Radiation for Fixing the Experimental Information";
Poster: 16th Danubia-Adria Symposium on Experimental Methods in Solid Mechanics, Cluj-Napoca, Romania; 29.09.1999 - 02.10.1999.

R. Blab, J. Eberhardsteiner:
"Research objectives and activities - an overview";
Vortrag: Evaluierung des Christian-Doppler-Labors für gebrauchsverhaltensorientierte Optimierung flexibler Straßenbefestigungen, TU Wien; 05.06.2007.

M. Dorn, K. Hofstetter, J. Eberhardsteiner:
"Experiments on the Load-Displacement Behavior of Dowel-Type Steel-To-Timber Connections";
Poster: 28th Danubia-Adria Symposium on Developments in Experimental Mechanics, Siofok, Hungary; 28.09.2011 - 01.10.2011.

M. Dorn, K. Hofstetter, V. Nohajova, J. Eberhardsteiner:
"Investigating Various Influences on the Embedment Strength and Stiffenss of Wood";
Poster: 28th Danubia-Adria Symposium on Developments in Experimental Mechanics, Siofok, Hungary; 28.09.2011 - 01.10.2011.

J. Eberhardsteiner:
"3D-Deformationsanalyse an einer hydraulischen biaxialen Zug-/Druckprüfmaschine";
Vortrag: Ettemeyer-Users-Meeting, Neu-Ulm, Deutschland; 05.05.1994.

J. Eberhardsteiner:
"A Criterion for the Effective Bending Strength of Wooden Boards with Knots Derived by a 3D Finite-Element Tool";
Vortrag: 8th European Solid Mechanics Conference (ESMC 2012), Graz; 09.07.2012 - 13.07.2012.

J. Eberhardsteiner:
"A Numerical Approach for Wood Products - From Clear Wood Properties and 'Structural' Inhomogeneities to Stochastic Aspects of Timber";
Vortrag: 12th International Conference on Computational Plasticity (COMPLAS XII), Barcelona, Spain; 03.09.2013 - 05.09.2013.

J. Eberhardsteiner:
"Biaxiale mechanische Eigenschaften von Fichtenholz - Experimentelle Untersuchungen und numerische Modellierung";
Vortrag: Technische Universität Chemnitz, Institut für Mechanik, Chemnitz, Germany (eingeladen); 22.06.2004.

J. Eberhardsteiner:
"Building with Wood - Europäische Forschungsvorhaben zur Steigerung der Wettbewerbsfähigkeit von Holz";
Vortrag: Österreichische Holzgespräche 2009 in Kooperation mit dem Fachverband der Holzindustrie Österreichs, Klagenfurt (eingeladen); 05.11.2009.

J. Eberhardsteiner:
"Computational Analysis of the Strength Reducing Effect of Knots in Timber";
Vortrag: 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics, Sydney, Australia (eingeladen); 19.07.2010 - 23.07.2010.

J. Eberhardsteiner:
"Computational Modeling of Wood and Wooden Structures";
Hauptvortrag: 4th International Conference on Advanced Engineered Wood & Hybrid Composites, Bar Habor, ME, USA (eingeladen); 06.07.2008 - 10.07.2008.

J. Eberhardsteiner:
"Computational Modeling of Wood and Wooden Structures";
Vortrag: Holzbau-Fachtreffen der Firma Glöckel, Rennersdorf, Austria (eingeladen); 08.10.2009.

J. Eberhardsteiner:
"Computational Multiscale Approach to the Mechanical Behavior and Transport Behavior of Wood";
Vortrag: International Symposium on Computational Structural Engineering, Shanghai, China (eingeladen); 22.06.2009 - 24.06.2009.

J. Eberhardsteiner:
"Constitutive Modeling of Wood - from macro to micro & nano mechanics";
Vortrag: Wood Kplus, 17 th Scientific Seminar, Vienna, Austria; 20.03.2006.

J. Eberhardsteiner:
"Die strukturelle Leistungsfähigkeit von Holz - die Grenzen und der Blick darüber hinaus";
Vortrag: Zukunftsforum Holz, Alpbach (eingeladen); 23.01.2009.

J. Eberhardsteiner:
"Different Influences on the Measurement Accuracy Using a 3D ESPI System";
Vortrag: Ettemeyer-Users-Meeting, Neu-Ulm, Germany; 24.06.1997.

J. Eberhardsteiner:
"Effect of Deterioration Processes on Effective Strength of Concrete Highlighted by Means of Numerical Limit Analysis";
Vortrag: 11th Asia-Pacific Conference on Structural Engineering and Construction (EASEC 11), Taipei, Taiwan (eingeladen); 15.11.2008 - 17.11.2008.

J. Eberhardsteiner:
"Entwicklung eines Holzprobekörpers für biaxiale Werkstoffprüfungen mittels experimenteller und numerischer Analysen";
Vortrag: Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Regensburg, Germany; 24.03.1997 - 27.03.1997.

J. Eberhardsteiner:
"Estimation of Damage and Strength Properties of Composite Materials Using Limit Analysis";
Vortrag: Croatian Society of Mechanics, Zagreb (eingeladen); 23.04.2009 - 24.04.2009.

J. Eberhardsteiner:
"Experimental & Numerical Characterization of Wood & Wood Products";
Vortrag: Academy of Sciences in Minsk, Minsk, Republic of Belarus (eingeladen); 07.10.2008 - 08.10.2008.

J. Eberhardsteiner:
"Experimental and Numerical Multiscale Characterization of Wood";
Vortrag: 7th Youth Symposium on Experimental Solid Mechanics (YSESM 7), Wojcieszyce, Poland (eingeladen); 14.05.2008 - 17.05.2008.

J. Eberhardsteiner:
"Experimental Investigation of the Mechanical Behavior of Wood Under Biaxial Loading";
Vortrag: 13th Inter-Institute-Seminar for Young Researchers, Wien, Austria; 26.10.2001 - 28.10.2001.

J. Eberhardsteiner:
"Experimentelle Untersuchung der biaxialen mechanischen Eigenschaften von Fichtenholz";
Vortrag: Habilitationskolloquium, Wien, Austria; 22.02.2001.

J. Eberhardsteiner:
"Experimentelle Untersuchung des biaxialen Verformungsverhaltens on Holz";
Vortrag: Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Braunschweig, Germany; 04.04.1994 - 08.04.1994.

J. Eberhardsteiner:
"Forschungsaktivitäten des Instituts für Festigkeitslehre zum Werkstoff Gummi";
Poster: Kautschuk-Symposium der Donauländer, Wien, Austria; 23.04.1999 - 24.04.1999.

J. Eberhardsteiner:
"Höhere Plattentheorien für die Bemessung von Brettsperrholz, einem mehrschichtigen schubnachgiebigen Plattenwerkstoff";
Vortrag: Baustatik-Baupraxis 11, Innsbruck, Austria (eingeladen); 21.02.2011 - 22.02.2011.

J. Eberhardsteiner:
"Identification of Failure Modes of CLT Plates by Means of DIC Measurements";
Vortrag: 16th International Conference on Experimental Mechanics (ICEM16), Cambridge, England; 07.07.2014 - 11.07.2014.

J. Eberhardsteiner:
"Imaging the Micromechanical Response of Wood in Steel-Dowel Connections";
Poster: 30th Danubia-Adria-Symposium on Advances in Experimental Mechanics (DAS 30), Primosten, Croatia; 25.09.2013 - 28.09.2013.

J. Eberhardsteiner:
"Influence of Combined Thermo-Mechanical Strain Behavior of Concrete on the Performance of Tunnel Linings";
Vortrag: ECCOMAS Thematic Conference on Computational Methods in Tunneling and Subsurface Engineering (EURO:TUN 2013), Bochum, Germany; 17.04.2013 - 19.04.2013.

J. Eberhardsteiner:
"Influence of Stiffness Variation in Timber Boards on Effective Behavior of GLT Beams";
Vortrag: 11th World Congress on Computational Mechanics (WCCM XI) & 5th European Conference on Computational Mechanics (ECCM V) & 6th European Conference on Computational Fluid Dynamics (ECFD VI), Barcelona, Spain (eingeladen); 20.07.2014 - 25.07.2014.

J. Eberhardsteiner:
"Influence of Transducer Frequency and Specimen Thickness in Ultrasonic Stiffness Measurements";
Vortrag: 6th BSSM International Conference on Advances in Experimental Mechanics, London, United Kingdom (eingeladen); 09.09.2008 - 11.09.2008.

J. Eberhardsteiner:
"Innovative Material Modelling of Wood and Wood Products";
Vortrag: PhD Colloquium, Vienna (eingeladen); 16.08.2011 - 19.08.2011.

J. Eberhardsteiner:
"Large-Scale Fire Test on Concrete - Design and Results";
Poster: 28th Danubia-Adria Symposium on Developments in Experimental Mechanics, Siofok, Hungary (eingeladen); 28.09.2011 - 01.10.2011.

J. Eberhardsteiner:
"Load Carrying Behavior of Young Shotcrete Top Heading Tunnel Shells";
Vortrag: International Conference "Technology of Construction and Reconstruction" (TCR 2013), Minsk, Belarus (eingeladen); 11.11.2013 - 13.11.2013.

J. Eberhardsteiner:
"Materialgesetze für Holz - Unerlässlich für die Bewertung und Prognose des Verhaltens von Holz und Holzkonstruktionen";
Vortrag: 12. Internationales Holzbau-Forum, Garmisch-Partenkirchen, Germany (eingeladen); 07.12.2006.

J. Eberhardsteiner:
"Mechanical and Transport Properties of Concrete at High Temperatures";
Vortrag: 7th BSSM International Conference on Advances in Experimental Mechanics, Liverpool, United Kingdom (eingeladen); 07.09.2010 - 09.09.2010.

J. Eberhardsteiner:
"Mechanical Behavior of Wood - A Bridge from Microstructure to Structural Applications by Means of Computational Methods";
Vortrag: 39th Solid Mechanics Conference (SOLMECH 2014), Zakopane, Poland (eingeladen); 01.09.2014 - 05.09.2014.

J. Eberhardsteiner:
"Mechanical Characterization of Building Materials - From Nano Scale to Structural Scale";
Vortrag: Polish Academy of Sciences, Wroclaw, Poland (eingeladen); 18.05.2012.

J. Eberhardsteiner:
"Mechanical Characterization of Wood for Knowledge-Based Timber Industry";
Vortrag: BRA.IN DAY 2009 - Branchenforschungstag für Bau- und Kunststoffwirtschaft, Linz, Austria (eingeladen); 16.11.2009.

J. Eberhardsteiner:
"Mechanische Charakterisierung von Holz - Von der Nanostruktur zur Baukonstruktion";
Vortrag: Seminar Institut für Allgemeine Physik (IAP), TU Wien; 08.05.2007.

J. Eberhardsteiner:
"Mehrskalenmodelle zur Beschreibung des mechanischen Verhaltens von Baustoffen";
Vortrag: Math.-naturwiss. Klasse der Österreichischen Akademie der Wissenschaften, Wien (eingeladen); 13.03.2009.

J. Eberhardsteiner:
"Mehrskalenmodellierung von Baustoffen - Holz, Spritzbeton und Asphalt";
Vortrag: ANSYS Conference & 27. CADFEM Users' Meeting, Leipzig, Germany (eingeladen); 18.11.2009 - 20.11.2009.

J. Eberhardsteiner:
"Micromechanical Modeling of Common Yew and Norway Spruce";
Vortrag: 84th Annual Meetingof the International Association of Applied Mathematics and Mechanics (GAMM 2013), Novi Sad, Serbia (eingeladen); 18.03.2013 - 22.03.2013.

J. Eberhardsteiner:
"Microstructural Modeling of Elastic Limit States of Wood";
Vortrag: 6th International Congress of Croatian Society of Mechanics, Dubrovnik, Croatia (eingeladen); 30.09.2009 - 02.10.2009.

J. Eberhardsteiner:
"Modellierung von Baustoffen mit Hilfe von Mehrskalengesetzen";
Vortrag: Festkolloquium: 35 Jahre Experimentelle Strukturanalyse/GESA - 80. Geburtstag des Ehrenvorsitzenden der GESA Prof. Dr.-Ing. Karl-Hans Laermann, Berlin-Lichterfelde (eingeladen); 19.01.2010.

J. Eberhardsteiner:
"Multi-scale Modeling of Building Materials and its Experimental Validation";
Vortrag: 50th Annual Conference on Experimental Stress Analysis (EAN 2012), Tabor, Czech Republic (eingeladen); 04.06.2012 - 07.06.2012.

J. Eberhardsteiner:
"Multiscale Modeling of Building Materials and its Experimental Validation";
Vortrag: 15th International Conference on Experimental Mechanics (ICEM15), Porto, Portugal (eingeladen); 22.07.2012 - 27.07.2012.

J. Eberhardsteiner:
"Multiscale Prediction of Strength Properties of Asphalt by means of Limit Analysis";
Vortrag: 9th US National Congress on Computational Mechanics, San Francisco, USA (eingeladen); 23.07.2007 - 26.07.2007.

J. Eberhardsteiner:
"Nichtlinear elastische dreiaxiale konstitutive Modelle für Beton";
Vortrag: GAMM-Seminar "Stahlbeton", Wien, Austria; 19.11.1987 - 20.11.1987.

J. Eberhardsteiner:
"Numerical Simulation of Rubber Tread Blocks in Frictional Sliding";
Vortrag: 7th International Conference on Computational Structures Technology (CST 2004), Lisbon, Portugal; 07.09.2004 - 09.09.2004.

J. Eberhardsteiner:
"Numerische Modellierung von verstärkten Elastomer-Hydraulikschläuchen";
Vortrag: International Rubber Conference 2003, Nürnberg, Germany; 30.06.2003 - 04.07.2003.

J. Eberhardsteiner:
"Optical Creep of Radiation Cured Polymers - Application to Three-Dimensional Photoelasticity";
Vortrag: First International Conference on Mechanics of Time Dependent Materials, Laibach, Slovenia; 11.09.1995 - 13.09.1995.

J. Eberhardsteiner:
"Poro-micromechanical Estimates for Elastic Limit States of Wood";
Vortrag: 11th Asia-Pacific Conference on Structural Engineering and Construction (EASEC 11), Taipei, Taiwan (eingeladen); 19.11.2008 - 21.11.2008.

J. Eberhardsteiner:
"Recent Developments in Mechanical Modeling of Wood and Wood Materials";
Vortrag: XII. International Scientific Conference, Faculty of Civil Engineering of Brno University of Technology (eingeladen); 20.04.2009 - 22.04.2009.

J. Eberhardsteiner:
"Recent Developments in Multiscale Modeling of Asphalt Concrete - From Continuum Micromechanics to Structural Analysis";
Vortrag: IV European Conference on Computational Mechanics, Paris, France (eingeladen); 16.05.2010 - 21.05.2010.

J. Eberhardsteiner:
"Recent Developments in Upscaling of Viscous Properties of Multi-Composed Materials - Application to Asphalt";
Vortrag: 7th World Congress on Computational Mechanics (WCCM VII), Los Angeles, USA; 16.07.2006 - 22.07.2006.

J. Eberhardsteiner:
"Reinforced Concrete Hinges: Laboratory Testing, Finite Element Analysis, Design Recommendations (Rudolf Beer Lecture)";
Vortrag: 37th Danubia-Adria Symposium on Advances in Experimental Mechanics, Linz, Austria (eingeladen); 21.09.2021 - 24.09.2021.

J. Eberhardsteiner:
"Solid-Type and Plate-Type Load Carrying Mechanisms in Wood - Investigations by a Multistep Load Homogenization Scheme";
Vortrag: 16th Inter-Institute Seminar for Young Researchers, Vienna, Austria; 17.05.2007 - 20.05.2007.

J. Eberhardsteiner:
"Strategie und Technische Wissenschaften";
Vortrag: Wiener Strategiekonferenz 2017, Landesverteidigungsakademie Wien, Wien (eingeladen); 26.06.2017 - 30.06.2017.

J. Eberhardsteiner:
"Strength of Geomaterials: Multiscale Theories and Experiments at Appropriate Problem-Dependent Length Scales";
Vortrag: International Workshop on Multiscale & Multiphysics Processes in Geomechanics, Stanford, USA (eingeladen); 23.06.2010 - 25.06.2010.

J. Eberhardsteiner:
"Strength Properties of Composites Highlighted by Means of Numerical Analysis";
Vortrag: Taiwan-Austria Joint Workshop, Taipei, China (eingeladen); 15.11.2008 - 17.11.2008.

J. Eberhardsteiner:
"Thermo-Mechanical Behavior of Concrete and its Performance in Tunnel Linings under Fire Loading";
Vortrag: Fifth International Conference on Computational Methods for Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2013), Santa Eulalia, Ibiza, Spain (eingeladen); 17.06.2013 - 19.06.2013.

J. Eberhardsteiner:
"Tragverhalten junger Tunnelkalottenschalen aus Spritzbeton";
Vortrag: 17. Dresdner Baustatik-Seminar, Dresden, Germany (eingeladen); 25.10.2013.

J. Eberhardsteiner:
"TU Wien International - global Teaching Strategy. Internationalization in Education at TU Wien";
Vortrag: Vii International Conference on "Technical Universities: Integration with European and World Education Systems", Izhevsk, Russia (eingeladen); 21.02.2017 - 22.02.2017.

J. Eberhardsteiner:
"Vergleichendes konstitutives Modellieren dreiaxial beanspruchten Betons auf der Grundlage nichtlinear elastischer Werkstoffgesetze";
Vortrag: Jahrestagung der Gesellschaft für Angewandte Mathematik und Mechanik (GAMM), Stuttgart, Deutschland; 13.04.1987 - 17.04.1987.

J. Eberhardsteiner:
"Werkstoffmodell für Holz - Von der Nanoskala zur Strukturebene";
Vortrag: Wood School 2010, Gaming, Austria (eingeladen); 29.09.2010 - 30.09.2010.

J. Eberhardsteiner:
"Werkstoffmodellierung in der numerischen Mechanik - mikro- und makromechanische Charakterisierung von Holz";
Vortrag: Carl-Friedrich-Gauß-Kolloquium der Braunschweigischen Wissenschaftlichen Gesellschaft, Braunschweig, Germany (eingeladen); 04.05.2007.

J. Eberhardsteiner:
"Wood and Wood Products - Linking Multiscale Analysis and Structural Numerical Simulations";
Vortrag: 7th European LS-DYNA Conference, Salzburg (eingeladen); 14.05.2009 - 15.05.2009.

J. Eberhardsteiner:
"Wood and Wood Products - Mechanical Characterization from Nano Scale to Structural Scale";
Vortrag: Universität für Architektur, Bauingenieurwesen und Geodäsie Sofia, Bulgaria, Sofia, Bulgaria (eingeladen); 19.09.2011.

J. Eberhardsteiner:
"Wood and Wood Products: Mechanical Characterisation from Nano Scale to Structural Scale";
Vortrag: 7th International Conference on Computational Mechanics for Spatial Structures (IASS-IACM 2012), Sarajevo, Bosnia-Herzegovina (eingeladen); 02.04.2012 - 04.04.2012.

J. Eberhardsteiner:
"Wood Elasticity Revisited in the Framework of Continuum Micromechanics";
Vortrag: 8th U.S. National Congress on Computational Mechanics, Austin, TX, USA; 24.07.2005 - 28.07.2005.

J. Eberhardsteiner:
"Wood Micromechanics: From Multiscale Modeling to Structural Application";
Vortrag: Third International Symposium on Computational Mechanics (ISCM III)/Second Symposium on Computational Structural Engineering (CSE II), Taipei, Taiwan (eingeladen); 05.12.2011 - 07.12.2011.

J. Eberhardsteiner:
"Wood research at Vienna University of Technology";
Vortrag: Österreichische Forschungsförderungsgesellschaft, Wien (eingeladen); 29.10.2008.

J. Eberhardsteiner:
"Zur Frage der Lasteinleitung bei experimentellen Festigkeitsuntersuchungen von zweiaxial beanspruchtem Holz";
Vortrag: ASESA-Kolloquium "Experimentelle Mechanik in der Industrie", Wien, Austria; 13.06.1991 - 14.06.1991.

J. Eberhardsteiner, R. Beer, K.A. Machinek:
"Experimental and Numerical Investigation of the Strain Distribution in the Regions of Notches";
Poster: 12th Danubia-Adria Symposium on Experimental Methods in Solid Mechanics, Sopron, Ungarn; 05.10.1995 - 07.10.1995.

J. Eberhardsteiner, M. Fidi:
"Experimental Investigation of the Adhesive Friciton Behavior of Rubber Using a New Testing Device";
Poster: 14th Danubia-Adria Symposium on Experimental Methods in Solid Mechanics, Porec, Kroatien; 02.10.1997 - 04.10.1997.

J. Eberhardsteiner, W. Fidi, O. Lahayne:
"Experimental Investigation of Adhesive Friction Properties of Rubber on Wet Surfaces";
Poster: 15th Danubia-Adria Symposium on Experimental Methods in Solid Mechanics, Bertinoro, Italy; 30.09.1998 - 03.10.1998.

J. Eberhardsteiner, J. Füssl:
"Berechenbarkeit von Holz - Von der Mikrostruktur zur Baukonstruktion";
Vortrag: Österreichische Akademie der Wissenschaften (math.-nat. Klasse), Wien (eingeladen); 23.06.2017.

J. Eberhardsteiner, M. Gingerl, L. Ondris:
"Beurteilung der Meßgenauigkeit eines 3D-ESPI-Systems bei der biaxialen Festigkeitsprüfung von Holz";
Poster: GESA-Symposium 1996, Experimentelle Beanspruchungsanalyse, neue Entwicklungen und Anwendungen, Schliersee, Deutschland; 10.10.1996 - 11.10.1996.

J. Eberhardsteiner, M. Gingerl, L. Ondris:
"Biaxial Testing Equipment for Plain Wood Specimen with Inclined Grain Directions";
Poster: 11th Danubia-Adria Symposium on Experimental Methods in Solid Mechanics, Baden, Austria; 29.09.1994 - 01.10.1994.

J. Eberhardsteiner, M. Gingerl, L. Ondris:
"Experimental Investigation of the Strength of Solid Wood Under Biaxial Loading Oblique to the Grain Direction";
Poster: COST Action E8 Workshop "Damage in Wood", Bordeaux, France; 27.05.1999 - 28.05.1999.

J. Eberhardsteiner, M. Gingerl, L. Ondris:
"Some Accuracy Aspects of 3D Electronic Speckle Pattern Inferometry";
Poster: 13th Danubia-Adria Symposium on Experimental Methods in Solid Mechanics, Rajecké Teplice, Slowakei; 26.09.1996 - 28.09.1996.

J. Eberhardsteiner, H. Rattensperger, W. Fidi:
"Experimental Investigation Concerning the Material Behavior of High-Pressure Hydraulic Hoses";
Poster: 17th Danubia-Adria Symposium on Experimental Methods in Solid Mechanics, Prag, Czech Republic; 11.10.2000 - 14.10.2000.

M. Fleischmann, J. Eberhardsteiner, L. Ondris:
"Experimental Investigation of Spruce Wood in Different Material-Directions and Constitutive Modelling Including Knot Effects";
Poster: 20th Danubia-Adria Symposium on Experimental Methods in Solid Mechanics, Györ, Hungary; 24.09.2003 - 27.09.2003.

M. Fleischmann, H.W. Müllner, J. Eberhardsteiner:
"An Orthotropic Single-Surface Plasticity Model for Spruce Wood under Consideration of Knot Effects";
Poster: 21st Danubia-Adria Symposium on Experimental Methods in Solid Mechanics, Brijuni/Pula, Croatia; 29.09.2004 - 02.10.2004.

M. Fleischmann, H.W. Müllner, H. Krenn, J. Eberhardsteiner:
"Experimental and Numerical Investigation of Timber Structures for the Validation of an Orthotropic Plasticity Model";
Poster: 22nd Danubia-Adria Symposium on Experimental Methods in Solid Mechanics (DAS-22), Monticelli Terme - Parma, Italy; 28.09.2005 - 01.10.2005.

P. Helnwein, M. Fleischmann, J. Eberhardsteiner:
"Viscous and Plastic Phenomena on Clear Spruce Wood Under Quasi-Static Cyclic Compressive Loading Perpendicular to Grain";
Poster: 19th Danubia-Adria Symposium on Experimental Methods in Solid Mechanics, Polanica Zdroj, Polen; 25.09.2002 - 28.09.2002.

G. Hochreiner, M. Schweigler, J. Eberhardsteiner:
"Assessment of Embedment and Plug-Tension-Shear Failure of Dowel Groups by DIC-Measurements";
Poster: 31st Danubia-Adria Symposium on Advances in Experimental Mechanics, Kempten, Germany; 24.09.2014 - 27.09.2014.

G. Hochreiner, M. Schweigler, J. Eberhardsteiner:
"Embedding Behaviour of Dowel Type Connectors in Wood Interpretation of Experimental Findings";
Poster: 33rd Danubia-Adria Symposium on Advances in Experimental Mechanics, Portoroz, Slovenia; 20.09.2016 - 23.09.2016.

A. Jäger, T. Bader, K. Hofstetter, J. Eberhardsteiner:
"Identification of Elastic Properties of Wood Cell Walls by Means of Nanoindentation";
Poster: 26th Danubia-Adria Symposium on Advances in Experimental Mechanics, Leoben, Österreich; 23.09.2009 - 26.09.2009.

J. Kodvanj, R. Beer, J. Eberhardsteiner, S. Jecic:
"Investigation of Mechanical Problems in the Application of Acetabulum Cups for Hip Prothesis";
Poster: 22nd Danubia-Adria Symposium on Experimental Methods in Solid Mechanics (DAS-22), Monticelli Terme - Parma, Italy; 28.09.2005 - 01.10.2005.

Ch. Kohlhauser, Ch. Hellmich, J. Eberhardsteiner:
"Sample Geometry Dependencies in Measuremets of Ultrasonic Wave Velocity";
Poster: 7th Youth Symposium on Experimental Solid Mechanics (YSESM 7), Wojcieszyce, Poland (eingeladen); 14.05.2008 - 17.05.2008.

O. Lahayne, J. Eberhardsteiner, R. Reihsner:
"Tribological Investigations Using a Linear Friction Tester (LFT)";
Poster: 25th Danubia-Adria Symposium on Advances in Experimental Mechanics, Budweis and Krumlov; 24.09.2008 - 27.09.2008.

O. Lahayne, L. Zelaya-Lainez, T. Buchner, J. Eberhardsteiner:
"Influence of Nano-Additives on the Elasticity of Cement";
Poster: 37th Danubia-Adria Symposium on Advances in Experimental Mechanics, Linz, Austria; 21.09.2021 - 24.09.2021.

M. Lukacevic, J. Füssl, S. Pech, J. Eberhardsteiner:
"Simulation of Failure Mechanisms in Wooden Boards with Knots as a Basis for Timber Engineering Design Cencepts";
Poster: Engineering Mechanics Institute 2019 Conference, Pasadena, CA, USA; 18.06.2019 - 21.06.2019.

H. Moser, T. Ring, M. Zeiml, M. Dorn, R. Lackner, J. Eberhardsteiner:
"Experimental Investigation of Strain Behavior and Transport Properties of Thermally-Loaded Concrete";
Vortrag: 27th Danubia-Adria Symposium on Advances in Experimental Mechanics, Wroclaw, Poland; 22.09.2010 - 25.09.2010.

H.W. Müllner, J. Eberhardsteiner, A. Wieczorek:
"Experimental Investigation and Identification of Material Parameters for Rubber Blends";
Poster: 22nd Danubia-Adria Symposium on Experimental Methods in Solid Mechanics (DAS-22), Monticelli Terme - Parma, Italy; 28.09.2005 - 01.10.2005.

H.W. Müllner, M. Fleischmann, J. Eberhardsteiner:
"Orthotropic Single-Surface Plasticity Model for Spruce Wood including the Effect of Knots";
Poster: 1st Workshop for COST Action E35, Vila Real, Portugal; 08.09.2004 - 09.09.2004.

H.W. Müllner, A. Fritsch, Ch. Kohlhauser, Ch. Hellmich, D. Godlinski, A. Rota, R. Reihsner, R. Slesinski, J. Eberhardsteiner:
"Acoustical and Poromechanical Characterization of Titanium Scaffolds for Biomedical Applications";
Poster: 23rd Danubia-Adria Symposium on Experimental Methods in Solid Mechanics, Podbanské-Zilina, Slovak Republic; 26.09.2006 - 29.09.2006.

H.W. Müllner, A. Jäger, J. Eberhardsteiner:
"Experimental Identification of Viscoelastic Properties of Rubber Blends by Means of a Torsional Rheometer";
Poster: 23rd Danubia-Adria Symposium on Experimental Methods in Solid Mechanics, Podbanské-Zilina, Slovak Republic; 26.09.2006 - 29.09.2006.

H.W. Müllner, S. Koch, A. Wieczorek, J. Eberhardsteiner:
"Constitutive Analysis of Rubber Compounds with Varying Molecular Structure";
Poster: 24th Danubia-Adria Symposium on Developments in Experimental Mechanics, Sibiu, Romania; 19.09.2007 - 22.09.2007.

H.W. Müllner, S. Koch, A. Wieczorek, J. Eberhardsteiner:
"Influence of Crystallization and Filler Degree on Viscoelastic Properties of Rubber Compounds";
Poster: 4th Annual European Rheology Conference (AERC), Naples, Italy; 12.04.2007 - 14.04.2007.

H.W. Müllner, A. Wieczorek, J. Eberhardsteiner:
"Numerical Prediction of the Dimensioning of Tools for the Extrusion Process of Rubber Profiles";
Poster: 10th ESAFORM Conference on Material Forming, Zaragoza, Spain; 18.04.2007 - 20.04.2007.

H.W. Müllner, A. Wieczorek, B. Manninger, J. Eberhardsteiner:
"Characteristics of Shear Viscosity during Extrusion of Rubber Blends";
Poster: 24th Danubia-Adria Symposium on Developments in Experimental Mechanics, Sibiu, Romania; 19.09.2007 - 22.09.2007.

H.W. Müllner, A. Wieczorek, S. Seiler, J. Eberhardsteiner:
"Constitutive Characterization of Extruded Rubber Blends by Means of an Extrusion Rheometer";
Poster: 5th European Conference on Constitutive Models for Rubber (ECCMR 2007), Paris, France; 04.09.2007 - 07.09.2007.

T. Müllner, R. Reihsner, W. Menth-Chiari, J. Eberhardsteiner, R. Schabus:
"Rheological Studies on Clamps Designed for Biomechanical Test with Human Tendons";
Poster: 1. Wiener Symposium, Zukunftsperspektiven - neue Wege und Technolgien in der Unfallchirurgie, Wien, Austria; 11.01.2002 - 12.01.2002.

T. Müllner, R. Schabus, W. Menth-Chiari, R. Reihsner, J. Eberhardsteiner:
"Bioresorbierbare Fixationsmaterialien für Vkb-Transplantate";
Poster: 1. Wiener Symposium, Zukunftsperspektiven - neue Wege und Technolgien in der Unfallchirurgie, Wien, Austria; 11.01.2002 - 12.01.2002.

Ch. Pichler, A. Jäger, R. Lackner, J. Eberhardsteiner:
"Identification of Material Properties from Nanoindentation: Application to Bitumen and Cement Paste";
Poster: 22nd Danubia-Adria Symposium on Experimental Methods in Solid Mechanics (DAS-22), Monticelli Terme - Parma, Italy; 28.09.2005 - 01.10.2005.

R. Reihsner, R. Beer, J. Eberhardsteiner, H. Millesi:
"A New Testing Equipment for Biaxial Biomechanical Investigations with Flat Soft Connective Tissues such as Skin";
Poster: 13th Danubia-Adria Symposium on Experimental Methods in Solid Mechanics, Rajecké Teplice, Slowakei; 26.09.1996 - 28.09.1996.

R. Reihsner, B. Kriegleder, P. Kochova, P. Heuberer, W. Anderl, J. Eberhardsteiner:
"The Stability of Tendon Fixation to Bone in Surgery";
Poster: 23rd Danubia-Adria Symposium on Experimental Methods in Solid Mechanics, Podbanské-Zilina, Slovak Republic; 26.09.2006 - 29.09.2006.

R. Reihsner, T. Müllner, J. Eberhardsteiner, W. Menth-Chiari, W. Kaltenbrunner, M. Luxl:
"A New Cyro-Clamp Designed for Biomechanical Tests with Human Tendons and Ligaments";
Poster: 18th Danubia-Adria Symposium on Experimental Methods in Solid Mechanics, Steyr; 26.09.2001 - 29.09.2001.

T. Ring, M. Zeiml, R. Lackner, J. Eberhardsteiner:
"Large-Scale Fire Tests on Concrete - Design and Results";
Vortrag: 18th Inter-Institute Seminar for Young Researchers, Budapest, Hungary; 23.09.2011 - 25.09.2011.

R. Schabus, T. Müllner, W. Menth-Chiari, R. Reihsner, J. Eberhardsteiner:
"Die Primäre oder Revisions-VKB-Plastik mit STG Transplantaten";
Poster: 1. Wiener Symposium, Zukunftsperspektiven - neue Wege und Technolgien in der Unfallchirurgie, Wien, Austria; 11.01.2002 - 12.01.2002.

M. Schweigler, T. Bader, J. Eberhardsteiner:
"The Influence of Displacement Boundary Conditions on the Embedment Behavior of Dowel-Type Fasteners";
Poster: 33rd Danubia-Adria Symposium on Advances in Experimental Mechanics, Portoroz, Slovenia; 20.09.2016 - 23.09.2016.

K. Stangl, A. Jäger, R. Blab, J. Eberhardsteiner:
"From Nano to Macro Mechanics of Asphalt Concrete";
Poster: Junior Scientist Conference 2005, New York (USA) (eingeladen); 11.04.2005 - 12.04.2005.

L. Wagner, T. Bader, K. de Borst, J. Eberhardsteiner:
"Nanoindentation to Study Within-Tree Variability of Wood Cell Wall Stiffness";
Poster: 29th Danubia-Adria-Symposium on Advances in Experimental Mechanics (DAS 29), Belgrade, Serbien; 26.09.2012 - 29.09.2012.

L. Wagner, C. Bos, T. Bader, J. Eberhardsteiner:
"Moisture-Dependent Mechanical Properties of Softwood and Hardwood Cell Walls: A Nanoindentation Study";
Poster: 31st Danubia-Adria Symposium on Advances in Experimental Mechanics, Kempten, Germany; 24.09.2014 - 27.09.2014.

C. Wikete, T. Bader, A. Jäger, M. Dorn, K. Hofstetter, J. Eberhardsteiner:
"Mechanical Properties and Microstructural Characteristics of Harwood";
Vortrag: 27th Danubia-Adria Symposium on Advances in Experimental Mechanics, Wroclaw, Poland; 22.09.2010 - 25.09.2010.


Habilitationsschriften


J. Eberhardsteiner:
"Mechanisches Verhalten von Fichtenholz - Experimentelle Bestimmung der biaxialen Festigkeitseigenschaften";
Technische Universität Wien, Fakultät für Bauingenieurwesen, 2001.


Dissertationen (eigene und begutachtete)


E. Aigner:
"Multiscale Modeling for the Description of the Thermorheological Behavior of Building Materials - Application to Bituminous Mixtures in the Context of Performance Assessment of Flexible Pavements and to Frozen Ground as Temporary Supports in Underground Excavation";
Betreuer/in(nen), Begutachter/in(nen): R. Lackner, J. Eberhardsteiner; Institut für Mechanik der Werkstoffe und Strukturen, 2010; Rigorosum: 17.12.2010.

J. Eberhardsteiner:
"Synthese aus konstitutivem Modellieren von Beton mittels dreiaxialer, nichtlinear-elastischer Werkstoffgesetze und Finite-Elemente-Analysen dickwandiger Stahlbetonkonstruktionen";
Betreuer/in(nen), Begutachter/in(nen): H.A. Mang, H. Reiffenstuhl; Institute for Strength of Materials, TU Wien, 1989.

C. Exner:
"Multipoint Optical Measurement of Structural Surface Intensity";
Betreuer/in(nen), Begutachter/in(nen): E. Benes, J. Eberhardsteiner; Institut für Allgemeine Physik, 2002; Rigorosum: 2002.

M. Fleischmann:
"Numerische Berechnung von Holzkonstruktionen unter Verwendung eines realitätsnahen orthotropen elasto-plastischen Werkstoffmodells";
Betreuer/in(nen), Begutachter/in(nen): J. Eberhardsteiner, G. Schickhofer; Institut für Mechanik der Werktstoffe und Strukturen, 2005.

J. Füssl:
"Multiscale Fracture Modeling of Bituminous Mixtures - From Fatique Behavior to Ultimate Strength Properties of Asphalt Concrete";
Betreuer/in(nen), Begutachter/in(nen): R. Lackner, J. Eberhardsteiner; Institut für Mechanik der Werkstoffe und Strukturen, 2010; Rigorosum: 01.07.2010.

C. Grohs:
"Study of Effects of Weld Seams in Finite Element Crash Simulations";
Betreuer/in(nen), Begutachter/in(nen): H. J. Böhm, J. Eberhardsteiner; Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2008; Rigorosum: 17.09.2008.

C. Hackspiel:
"A Numerical Simulation Tool for Wood Grading - On the Effect of Knots on the Mechanical Behavior of Wooden Boards";
Betreuer/in(nen), Begutachter/in(nen): J. Eberhardsteiner, G. Meschke; Institut für Mechanik der Werkstoffe und Strukturen, 2010; Rigorosum: 12.10.2010.

H. Hengl:
"Development and Application of Numerical Simulation Tools for the Prediction of the Structural Behaviour of Paving Block Pavements";
Betreuer/in(nen), Begutachter/in(nen): J. Füssl, J. Eberhardsteiner, R. Blab, F. Wellner; Institut für Mechanik der Werkstoffe und Strukturen, 2017; Rigorosum: 2017.

G. Hochreiner:
"Importance of Structural Modelling within the Framework of Eurocode 5 - Description on Selected Issues";
Betreuer/in(nen), Begutachter/in(nen): J. Eberhardsteiner, E. Serrano; Institut für Mechanik der Werkstoffe und Strukturen, 2014; Rigorosum: 25.08.2014.

K. Hofstetter:
"Thermo-Mechanical Simulation of Rubber Tread Blocks During Frictional Sliding";
Betreuer/in(nen), Begutachter/in(nen): J. Eberhardsteiner, M. Kaliske; Institut für Festigkeitslehre, 2004.

G. Kandler:
"Probabilistic Modelling of the Elastic Behaviour of Glued Laminated Timber";
Betreuer/in(nen), Begutachter/in(nen): J. Füssl, J. Eberhardsteiner, A. Olsson; Institut für Mechanik der Werkstoffe und Strukturen, 2016; Rigorosum: 01.04.2016.

J. Konnerth:
"Mechanische Charakterisierung von Holz-Klebstoff Verbindungen";
Betreuer/in(nen), Begutachter/in(nen): W. Gindl, J. Eberhardsteiner; Department für Materialwissenschaften und Prozesstechnik, Institut für Holzforschung, BOKU Wien, 2007; Rigorosum: 04/2007.

O. Lahayne:
"Experimentelle Reibungsuntersuchungen und Modellrechnungen zum Verhalten von Reifenmaterialien";
Betreuer/in(nen), Begutachter/in(nen): J. Eberhardsteiner, K. Hoffmann; Institut für Mechanik der Werkstoffe und Strukturen, 2007; Rigorosum: 21.08.2007.

M. Li:
"Finite-Element-Based Limit Analysis for Strength Predictions of Wood at Different Scales of Observation and a Novel Algorithm for Adaptive Implementation of Velocity Discontinuites in Upper Bound Approaches";
Betreuer/in(nen), Begutachter/in(nen): J. Eberhardsteiner, J. Füssl, C. Martin, Ch. Hellmich; Institut für Mechanik der Werkstoffe und Strukturen, 2018; Rigorosum: 08.06.2018.

M. Lukacevic:
"Numerical Simulation of Wooden Boards Considering Morphological Characteristics and Complex Failure Processes";
Betreuer/in(nen), Begutachter/in(nen): J. Eberhardsteiner, M. Kaliske; Institut für Mechanik der Werkstoffe und Strukturen, 2014; Rigorosum: 29.07.2014.

H.W. Müllner:
"Numerisches Vorhersagemodell für die Auslegung von Spritzköpfen und Werkzeugen für den Extrusionsprozess von Gummi";
Betreuer/in(nen), Begutachter/in(nen): J. Eberhardsteiner, G. Heinrich; Institut für Mechanik der Werkstoffe und Strukturen, 2007; Rigorosum: 28.06.2007.

T. Ranz:
"Viskoelastisches Materialmodell für Holz";
Betreuer/in(nen), Begutachter/in(nen): A. Lion, J. Eberhardsteiner; Institut für Mechanik/ Universität der Bundeswehr München, 2008; Rigorosum: 16.07.2008.

H. Rattensperger:
"Berechnungsmodelle für verstärkte Elastomere und deren Anwendung für Hochdruck-Hydraulikschläuche";
Betreuer/in(nen), Begutachter/in(nen): J. Eberhardsteiner, F. Sommer; Institut für Festigkeitslehre, 2003.

T. Ring:
"Experimental Characterization and Modeling of Concrete at High Temperatures - Structural Safety Assessment of Different Tunnel Cross-Sections Subjected to Fire Loading";
Betreuer/in(nen), Begutachter/in(nen): R. Lackner, J. Eberhardsteiner; Institut für Mechanik der Werkstoffe und Strukturen, 2012; Rigorosum: 21.09.2012.

M. Schweigler:
"Nonlinear Modeling of Reinforced Dowel Joints in Timber Structures - A Combined Experimental-Numerical Study";
Betreuer/in(nen), Begutachter/in(nen): J. Eberhardsteiner, T. Bader, T. Descamps; Institut für Mechanik der Werkstoffe und Strukturen, 2018; Rigorosum: 24.01.2018.

R. Stürzenbecher:
"Mechanical Behavior of Engineered Wood Products: Experimental Investigations and Advanced Modeling of Veneer Strand Boards and Cross Laminated Timber";
Betreuer/in(nen), Begutachter/in(nen): J. Eberhardsteiner, P. Niemz; Institut für Mechanik der Werkstoffe und Strukturen, 2010; Rigorosum: 16.06.2010.

A. Unterweger:
"Randnahe Anker unter Querlast - Mechanische Modellierung und Bemessung";
Betreuer/in(nen), Begutachter/in(nen): K. Bergmeister, J. Eberhardsteiner; Department für Bautechnik und Naturgefahren, Institut für Konstruktiven Ingenieurbau, BOKU Wien, 2008; Rigorosum: 2008.

L. Wagner:
"Micromechanical Modeling and Experimental Characterization of Sound and Degraded Wood Cell Walls";
Betreuer/in(nen), Begutachter/in(nen): K. de Borst, J. Eberhardsteiner, I. Burgert; Institut für Mechanik der Werkstoffe und Strukturen, 2014; Rigorosum: 04.06.2014.


Diplom- und Master-Arbeiten (eigene und betreute)


M. Autengruber:
"Modellierung und numerische Simulation des Feuchte- und Temperaturverhaltens von Holz-Aluminium-Verbundträgern";
Betreuer/in(nen): M. Lukacevic, J. Füssl, J. Eberhardsteiner; Institut für Mechanik der Werkstoffe und Strukturen, 2016; Abschlussprüfung: 17.06.2016.

C. Bos:
"Moisture Dependent Elastic and Viscoelastic Properties of Wood Cell Walls";
Betreuer/in(nen): T. Bader, L. Wagner, J. Eberhardsteiner; Institut für Mechanik der Werkstoffe und Strukturen, 2013; Abschlussprüfung: 30.09.2013.

S. Dallinger:
"Simulation des Strukturverhaltens unterschiedlicher Tunnelquerschnitte unter Brandbelastung";
Betreuer/in(nen): M. Zeiml, T. Ring, J. Eberhardsteiner; Institut für Mechanik der Werkstoffe und Strukturen, 2013; Abschlussprüfung: 22.11.2013.

J. Eberhardsteiner:
"Statische Detailuntersuchung der Verbindung Bogen-Versteifungsträger am Auflager eines Langer'schen Balkens für eine Eisenbahnbrücke"; Institute for Steel Structures, TU Wien, 1982.

J. Eitelberger:
"Multiscale Modelling of Transport Processes in Softwood under the Fiber Saturation Point";
Betreuer/in(nen): K. Hofstetter, J. Eberhardsteiner; Institut für Mechanik der Werkstoffe und Strukturen, 2008; Abschlussprüfung: 13.06.2008.

T. Forte:
"FEM Simulation zur schlagenden Bearbeitung von Stahl ";
Betreuer/in(nen): J. Eberhardsteiner; 202, 2004.

S. Gloimüller:
"Influence of Annual Rings on Displacement and Stress Fields in Wood at Loading Perpendicular to the Grain";
Betreuer/in(nen): K. Hofstetter, J. Eberhardsteiner; Institut für Mechanik der Werkstoffe und Strukturen, 2008; Abschlussprüfung: 25.04.2008.

Ch. Grohs:
"Thermomechanisch gekoppelte 3D-Finite Elemente Simulation von gleitenden Gummistollen";
Betreuer/in(nen): J. Eberhardsteiner, K. Hofstetter; Institut für Mechanik der Werktstoffe und Strukturen, 2004.

C. Jiménez:
"Numerical Simulations on the Strength Reducing Effect of Knots in Wooden Boards";
Betreuer/in(nen): C. Hackspiel, K. Hofstetter, J. Eberhardsteiner; Institut für Mechanik der Werkstoffe und Strukturen, 2010; Abschlussprüfung: 09/2010.

G. Kandler:
"Review of Stochastic Finite-Element Approaches and Assessment of their Applicability to Wood-Based Products";
Betreuer/in(nen): J. Füssl, J. Eberhardsteiner; Institut für Mechanik der Werkstoffe und Strukturen, 2012; Abschlussprüfung: 23.03.2012.

C. Karner:
"Qualitative und quantitative Beurteilung der Messgenauigkeit eines elektronischen 3D-Speckle-Interferometers";
Betreuer/in(nen): J. Eberhardsteiner; Institut für Festigkeitslehre, 1997; Abschlussprüfung: 1997.

T. Kiefer:
"Numerische Modellierung von Ziegelstrukturen zur Prognose der einaxialen Druckfestigkeit und effektiven Wärmeleitfähigkeit";
Betreuer/in(nen): J. Füssl, J. Eberhardsteiner; Institut für Mechanik der Werkstoffe und Strukturen, 2015; Abschlussprüfung: 20.03.2015.

S. Koch:
"Finite Elemente Analyse der Beanspruchungssituation von Seilbahneinlagerringen";
Betreuer/in(nen): K. Hofstetter, J. Eberhardsteiner; Institut für Mechanik der Werkstoffe und Strukturen, 2005.

Ch. Kohlhauser:
"A Multi-Surface Plasticity Model with Strain Softening for Failure Mechanisms of Clear Spruce Wood under Plain Biaxial Stress Conditions and Stabilization of its Numerical Implementation for Large Characteristic Lengths";
Betreuer/in(nen): P. Mackenzie-Helnwein, J. Eberhardsteiner; Institut für Mechanik der Werktstoffe und Strukturen, 2005.

R. Lampert:
"Failure Modes of Wood Cells Identified by an Approach Based on the Extended Finite Element Method";
Betreuer/in(nen): M. Lukacevic, J. Füssl, J. Eberhardsteiner; Institut für Mechanik der Werkstoffe und Strukturen, 2014; Abschlussprüfung: 2014.

M. Lukacevic:
"Validation and Optimization of a Numerical Simulation Tool for Wood Grading";
Betreuer/in(nen): C. Hackspiel, K. Hofstetter, J. Eberhardsteiner; Institut für Mechanik der Werkstoffe und Strukturen, 2009; Abschlussprüfung: 20.03.2009.

H. Mollay:
"Biologische feuchtesensitive Schalter";
Betreuer/in(nen): J. Eberhardsteiner; Institut für Mechanik der Werkstoffe und Strukturen, 2006; Abschlussprüfung: 2006.

H.W. Müllner:
"Konstitutives Modellieren von Fichtenholz unter biaxialer Beanspruchung mittels eines orthotropen Einflächenmodells unter Berücksichtigung von Ver- und Entfestigung";
Betreuer/in(nen): P. Mackenzie-Helnwein, J. Eberhardsteiner; Institute for Strength of Materials, Vienna University of Technology, 2003.

S. Pech:
"Metamodel Assisted Optimisation of Glued Laminated Timber Systems by Reordering Laminations Using Metaheuristic Algorithms";
Betreuer/in(nen): G. Kandler, J. Füssl, J. Eberhardsteiner; Institut für Mechanik der Werkstoffe und Strukturen, 2017; Abschlussprüfung: 20.10.2017.

P.I. Petracek:
"Experimentelle Validierung eines viskoelastischen Materialmodells für die numerische Simulation der Extrusion von Kautschukmischungen";
Betreuer/in(nen): J. Eberhardsteiner, H.W. Müllner; Institut für Mechanik der Werkstoffe und Strukturen, 2007.

B. Radecki-Pawlik:
"Numerical Simulations of the Load Bearing Behavior of Cross-Laminated Timber";
Betreuer/in(nen): J. Eberhardsteiner, K. Hofstetter, A. Jäger, J. Pamin; Institut für Mechanik der Werkstoffe und Strukturen, 2010; Abschlussprüfung: 19.03.2010.

H. Schwaiger:
"Entwicklung einer Prüfeinrichtung zur Untersuchung des Traktionsverhaltens von Gummiproben auf verschiedenen Oberflächen";
Betreuer/in(nen): J. Eberhardsteiner; Institut für Festigkeitslehre, 1996; Abschlussprüfung: 1996.

M. Schweigler:
"A Numerical Model for Slip Curves of Dowel Connections and Its Application to Timber Structures";
Betreuer/in(nen): T. Bader, G. Hochreiner, J. Eberhardsteiner; Institut für Mechanik der Werkstoffe und Strukturen, 2013; Abschlussprüfung: 21.06.2013.


Wissenschaftliche Berichte


R. Beer, J. Eberhardsteiner:
"Experimentelle Bestimmung der Steifigkeits- und Festigkeitseigenschaften implanierter Femura unter Torsionsbeanspruchung";
Bericht für AUVA, Wien, Austria; 1999.

J. Eberhardsteiner:
"Biaxiale Bruchversuche an Buchenholz";
Bericht für HILTI AG, Schaan, Liechtenstein; 2001.

J. Eberhardsteiner:
"Entwicklung des Linear-Friction-Testers ? eine Versuchseinrichtung zur Quantifizierung des druck- und geschwindigkeitsabhängigen Reibungsverhaltens von Gummimischungen auf unterschiedlichen Oberflächen";
Bericht für Continental AG, Hannover, Germany; 1995.

J. Eberhardsteiner:
"Experimentelle Untersuchung der biaxialen mechanischen Eigenschaften von zweiachsig, schräg zur Faserrichtung beanspruchtem Fichtenholz";
Bericht für BMWF GZ 45.424/1-IV/B/3a/97, Wien, Austria; 1999.

J. Eberhardsteiner:
"Software-Entwicklung zur Durchführung und Auswertung von biaxialen Bruchversuchen an orthotropen Werkstoffen";
Bericht für BMWF GZ45.311/2-IV/6a/93, Wien, Austria; 1994.

J. Eberhardsteiner, R. Beer:
"Experimentelle und numerische Untersuchung des Radbolzens einer Niederflurstraßenbahn";
Bericht für Siemens Verkehrstechnik, Wien, Austria; 1995.

J. Eberhardsteiner, R. Beer:
"Spannungsoptische Untersuchung einer Laufradhalterung";
Bericht für Doppelmayr Seilbahn-Vertriebsgesellschaft m.b.H., Austria; 1992.

J. Eberhardsteiner, R. Beer:
"Untersuchung des mechanischen Verhaltens eines einseitig osteotomierten Unterkiefers eines Schafes unter statischer Belastung";
Bericht für Univ.-Klinik für Mund-, Kiefer- und Gesichtschirurgie, Wien, Austria; 1994.

J. Eberhardsteiner, L. Ondris:
"Werkstoffversuche an Spanplatten";
Bericht für Julius Blum GmbH, Austria; 2002.

A. Fritsch, R. Reihsner, H.W. Müllner, R. Slesinski, Ch. Hellmich, J. Eberhardsteiner, W. Swieszkowski:
"Mechanical (triaxial) Testing on Biological Materials and Biomaterials";
Bericht für Network of Excellence "Knowledge-based Multicomponent Materials for Durable and Safe Performance - KMME-NoE"; 2006.

Ch. Hellmich, T. Brynk, Ch. Kohlhauser, H.W. Müllner, R. Reihsner, J. Eberhardsteiner, W. Swieszkowski, Z. Pakiela:
"Mechanical and Acoustical Testing of FGM-Biomaterials and Bioligical Materials";
Bericht für Network of Excellence "Knowledge-based Multicomponent Materials for Durable and Safe Performance (KMM-NoE)", Progress Report; 2007; 3 S.

Ch. Hellmich, J. Eberhardsteiner:
"Bewertung eines Versuchsplanes zwecks Einsatz von Polyfelt Schutzvliesen im Pipelinebau";
2004; 4 S.

Ch. Hellmich, J. Eberhardsteiner:
"Thermochemische Berechnungen zur Temperaturentwicklung in einer Spritzbetonschale auf Basis vorgegebener thermochemischer Materialeigenschaften";
Bericht für IGT - Geotechnik und Tunnelbau ZT GmbH; 2007; 10 S.

Ch. Hellmich, Ch. Kohlhauser, A. Malasoma, T. Brynk, W. Swieszkowski, Z. Pakiela, J. Eberhardsteiner, R. Reihsner, H.W. Müllner:
"Mechanical and Acoustical Testing of FGM-Biomaterials and Biological Materials";
Bericht für Network of Excellence "Knowledge-based Multicomponent Materials for Durable and Safe Performance (KMM-NoE)", Deliverable Report; 2007; 9 S.

Ch. Hellmich, H.W. Müllner, Ch. Kohlhauser, A. Fritsch, R. Reihsner, J. Eberhardsteiner, R. Slesinski, W. Swieszkowski, Z. Pakiela:
"Mechanical (triaxial) Tests on Biological Materials and Biomaterials";
Bericht für Network of Excellence "Knowledge-based Multicomponent Materials for Durable and Safe Performance (KMM-NoE)", Deliverable Report; 2006; 7 S.

Ch. Hellmich, St. Scheiner, B. Pichler, J. Eberhardsteiner:
"Specifications for Micromechanics-based Material Models for New Cementitious Materials for Tunnel Linings";
Bericht für TUNCONSTRUCT (co-sponsored by the European Commission); 2006; 30 S.

P. Helnwein, J. Eberhardsteiner, H.A. Mang:
"Numerische Untersuchung eines Fachwerkknotens einer Stahleisenbahnbrücke";
Bericht für Österreichische Bundesbahnen, Wien, Austria; 1997.

P. Helnwein, T. Huemer, J. Eberhardsteiner:
"Numerische Untersuchung betreffend eine neue Probenform zur Untersuchung der Druckabhängigkeit des Reibungsbeiwertes von Gummi";
Bericht für Continental AG, Hannover, Germany; 1998.

K. Hofstetter, J. Eberhardsteiner:
"STreaM (Simulation of Tread Block Mechanics) - Final Report";
Bericht für Continental AG, Hannover, Deutschland; 2003.

T. Huemer, W. Liu, J. Eberhardsteiner, H.A. Mang:
"Entwicklung eines wirklichkeitsnahen Reibungsmodells für Gummi zum Zwecke dreidimensionaler Traktionssimulationen";
Bericht für Continental AG, Hannover, Germany; 2000.

R. Lackner, Ch. Pichler, Ch. Brandstätter, L. Martak, H. Liebsch, J. Eberhardsteiner, H.A. Mang:
"Computer-Aided Assessment of Ground Improvement by Means of Jet Grouting in NATM Tunneling";
Bericht für Bundesministerium für Verkehr, Innovation und Technologie; 2004.

R. Lackner, M. Zeiml, D. Leithner, G. Ferner, J. Eberhardsteiner, H.A. Mang:
"Spalling Behavior of Concrete in Underground Facilities Caused by Fire Load [Feuerlastinduziertes Abplatzverhalten von Beton in Hohlraumbauten]";
Bericht für Österreichisches Bundesheer, Wien; 2005.

O. Lahayne, B. Pichler, J. Eberhardsteiner:
"Technology Research for Winter Performance Improvement - Activities 2012: Preparation of Snow Surfaces for Indoor Friction Test, Representative for Field Experiments with Tires";
Bericht für Final Report of the Research Project for Hankook Tire Co., Ltd.; 2013; 44 S.

O. Lahayne, R. Reihsner, B. Pichler, J. Eberhardsteiner:
"Technology Research for Winter Performance Improvement - Activities 2013/2014: From LFT-Testing for Creation of a Comprehensive Friction Coefficient Database, via Roughness Characterisation of Different Ice Surfaces, to the Development of a Generalised Friction Law";
Bericht für Final Report for the Second Year of the Research Project for Hankook Tire Co., Ltd.; 2014; 58 S.

H.A. Mang, J. Eberhardsteiner:
"Experimentelle Untersuchung des Verformungsverhaltens von Holz bei zweiachsiger, proportionaler Beanspruchung bis zum Bruch";
Bericht für Fonds zur Förderung der wissenschaftlichen Forschung (Projekt P08029), Wien, Austria; 1996.

H.A. Mang, J. Eberhardsteiner:
"Quantifizierung des Einflusses von Rohdichte und Holzfeuchtigkeit auf die Festigkeitseigenschaften von Fichtenholz bei zweiaxialer Beanspruchung bis zum Bruch";
Bericht für Fonds zur Förderung der wissenschaftlichen Forschung (Projekt P08772), Wien, Austria; 1997.

H.A. Mang, J. Eberhardsteiner, P. Helnwein:
"Finite Elemente Untersuchung eines Fachwerksknotens der Stahleisenbahnbrücke über die Traun bei Kleinmünchen: Variantenstudie";
Bericht für ÖBB, Wien, Austria; 1997.

H.A. Mang, J. Eberhardsteiner, P. Torzicky:
"Dreidimensionale elastoplastische Festigkeitsberechnung eines Stationsquerschlages eines Bauabschnittes der Wiener U-Bahn";
Bericht für Gemeinde Wien, MA 38, Austria; 1992.

H.A. Mang, J. Eberhardsteiner, P. Torzicky:
"Festigkeitsuntersuchung der Endverschlüsse des Schutzrohres der Ölfernleitung Genua-Ingolstadt entlang des Bodensees";
Bericht für Rheinische Ölleitungs GmbH, Austria; 1985.

H.A. Mang, J. Eberhardsteiner, P. Torzicky:
"Spannungsverteilung im Knochen zufolge zylindrischer Kieferimplantate";
Bericht für Univ.-Klinik für Zahn-, Mund- und Kieferheilkunde, Wien, Austria; 1987.

H.A. Mang, J. Eberhardsteiner, P. Torzicky:
"Standsicherheitsuntersuchung des Objektes 6, Stiftskaserne";
Bericht für Bundesministerium für Landesverteidigung, Austria; 1986.

H.A. Mang, J. Eberhardsteiner, P. Torzicky:
"Visko-elasto-plastische Festigkeitsberechnung thermisch beanspruchter Röntgen-Drehanoden";
Bericht für Plansee AG, Austria; 1987.

H. Millesi, J. Eberhardsteiner:
"Mechanische Anisotropie menschlicher Haut in Abhängigkeit von der Körperregion";
Bericht für FWF-Projekt P10418 und BMWF GZ49.947/2-Pr/4/95; 1998.

H.W. Müllner, J. Eberhardsteiner, A. Wieczorek, G. Ernst, W. Fidi:
"Entwicklung eines numerischen Vorhersagemodells für die Auslegung von Spritzköpfen und Werkzeugen für den Extrusionsprozess von Gummi - Bericht für FFF-Projekt Teil 1";
Bericht für Semperit Technische Produkte Ges.m.b.H. & Co KG, Wimpassing im Schwarzatale, Austria; 2005; 159 S.

H.W. Müllner, J. Eberhardsteiner, A. Wieczorek, S. Seiler, W. Fidi:
"Entwicklung eines numerischen Vorhersagemodells für die Auslegung von Spritzköpfen und Werkzeugen für den Extrusionsprozess von Gummi - Bericht für FFF-Projekt Teil 3";
Bericht für Semperit Technische Produkte Ges.m.b.H., Wimpassing im Schwarzatale, Austria; 2007; 124 S.

H.W. Müllner, P.I. Petracek, J. Eberhardsteiner, A. Wieczorek, W. Fidi:
"Entwicklung eines numerischen Vorhersagemodells für die Auslegung von Spritzköpfen und Werkzeugen für den Extrusionsprozess von Gummi - Bericht für FFF-Projekt Teil 2";
Bericht für Semperit Technische Produkte Ges.m.b.H. & Co KG, Wimpassing im Schwarzatale, Austria; 2006; 84 S.

B. Pichler, Ch. Hellmich, J. Eberhardsteiner:
"Investigation of the Influence of Composition on the Uniaxial Compressive Strength of Cementitious Materials, Studied by Means of an Elasto-brittle Continuum Micromechanics Model";
Bericht für Technical Report for Lafarge Centre des Recherches, Research Study Agreement LCR/TUW; Berichts-Nr. 10LCR241, 2011; 33 S.

B. Pichler, Ch. Hellmich, J. Eberhardsteiner:
"Reaktionskinetik und Kriecheigenschaften des Spritzbetons, der im Zuge des Vortriebs des Koralmtunnels (Baulos KAT2) verwendet wird";
Bericht für ÖBB-Infrastruktur AG, Geschäftsbereich Engineering Services; 2011; 24 S.

B. Pichler, Ch. Hellmich, J. Eberhardsteiner:
"Sensitivity of Uniaxial Compressive Strength of Cement Paste with Respect to Young's Modulus of Clinker";
Bericht für Technical Report for Lafarge Centre des Recherches, Research Study Agreement LCR/TUW; Berichts-Nr. 10LCR241, 2011; 15 S.

B. Pichler, Ch. Hellmich, J. Eberhardsteiner:
"Sensitivity of Uniaxial Compressive Strength ofConcrete with Respect to the Volume Fraction of Aggregates";
Bericht für Technical Report for Lafarge Centre des Recherches, Research Study Agreement LCR/TUW; Berichts-Nr. Nr. 10LCR241, 2011; 15 S.

B. Pichler, Ch. Hellmich, J. Eberhardsteiner, H.A. Mang:
"Endbericht zur Untersuchung der Gefährdung der Transalpinen Ölleitung durch Felsschlag im Streckenbereich Amertal";
Bericht für Transalpine Ölleitung in Österreich GmbH (TAL), Austria; 2003; 114 S.

B. Pichler, Ch. Hellmich, J. Eberhardsteiner, H.A. Mang:
"Untersuchung der Gefährdung der Transalpinen Ölleitung durch Felsschlag. Vorläufige Stellungnahme zu den Versuchen vom 1. und 2. Oktober 2002";
Bericht für Transalpine Ölleitung in Österreich GmbH (TAL), Austria; 2002; 7 S.

B. Pichler, Ch. Hellmich, J. Eberhardsteiner, H.A. Mang:
"Versuchsplan zur Untersuchung der Gefährdung der Transalpinen Ölleitung durch Felsschlag im Streckenbereich Amertal";
Bericht für Transalpine Ölleitung in Österreich GmbH (TAL), Austria; 2002; 13 S.

B. Pichler, Ch. Hellmich, St. Scheiner, J. Eberhardsteiner:
"Check of Adequacy of Model Formulation for Cementitious according to Materials Tests";
Bericht für TUNCONSTRUCT (sponsored by the European Commission), Integrated Project "Technology Innovation in Underground Construction", Milestone Report; 2007; 5 S.

B. Pichler, Ch. Hellmich, St. Scheiner, J. Eberhardsteiner:
"Predictive Capabilities of New Micromechanics-Based Constitutive Models for Cementitious Materials Developed at TUW";
Bericht für TUNCONSTRUCT (sponsored by the European Commission), Integrated Project "Technology Innovation in Underground Construction", Deliverable Report; 2008; 20 S.

B. Pichler, St. Scheiner, Ch. Hellmich, J. Eberhardsteiner:
"Material Properties of Shotcrete as Input for BEFE++";
Bericht für Bericht für das integrierte FP6 Projekt TUNCONSTRUCT; 2008; 25 S.

B. Pichler, St. Scheiner, Ch. Hellmich, J. Eberhardsteiner:
"Material Properties of Shotcrete as Input for BEFE++";
Bericht für TUNCONSTRUCT (sponsored by the European Commission), Integrated Project "Technology Innovation in Underground Construction"; 2009; 25 S.

B. Pichler, St. Scheiner, Ch. Hellmich, J. Eberhardsteiner:
"Versuchsprinzipien zur Untersuchung der Eignung von Geokunststoffen zum Schutz der äußeren Korrosionsschutzschichte erdverlegter Erdöl- und Erdgas-Pipelines während Einbau und Betrieb";
Bericht für Polyfelt GesmbH, Linz, Austria; OMV AG, Vienna, Austria; 2005; 10 S.

H. Rattensperger, J. Eberhardsteiner, H.A. Mang:
"Entwicklung von Berechnungsmodellen für verstärkte Elastomere und deren Anwendung für Hochdruckhydraulikschläuche";
Bericht für Semperit Technische Produkte GmbH&CoKG, Wimpassing, Austria; 2002.

R. Schaudy, J. Eberhardsteiner:
"Fixierung dreidimensionaler Deformationszustände in Polymeren mittels ionisierender Strahlung für spannungsoptische Untersuchungen";
Bericht für Fonds zur Förderung der wissenschaftlichen Forschung (Projekt P09302), Wien, Austria; 1995.

R. Schaudy, J. Eberhardsteiner:
"Spatial Stress and Deformation Analysis by Photoelastic Methods Using New Radiation-Cured Polymers. Chemical, Mechanical and Stress-Optical Fundamentals and its Application in Industry";
Bericht für FWF-Projekt P12417, Wien, Austria; 2000.

St. Scheiner, B. Pichler, Ch. Hellmich, J. Eberhardsteiner:
"Eignung von Geokunststoffen als Abriebschutz erdverlegter Erdöl- und Erdgaspipelines aus Stahl: Finite Elemente Analysen und Pilotversuche";
Bericht für Polyfelt GesmbH, Linz, Austria; OMV AG, Vienna, Austria; 2005; 37 S.

M. Zeiml, R. Lackner, J. Eberhardsteiner:
"Kulturdepot St. Pölten: Experimentelle und numerische Untersuchung der durch das Brandereignis vom 25.2.2008 entstandenen Beeinträchtigung von Beton und Bewehrungsstahl";
Bericht für ROBL IngenieurConsulting Ziviltechniker GmbH; 2008; 9 S.