[Zurück]

E. Neubauer, C. Eisenmenger-Sittner, H. Bangert, G. Korb:
"AFM and AUGER investigations of as-deposited and heat treated copper coatings on glassy carbon surfaces with titanium intermediate layers";
Vacuum, 71 (2003), S. 293 - 298.

AFM and AUGER investigations of as-deposited and heat treated copper coatings on glassy carbon surfaces with titanium intermediate layers

E. Neubauer [Corresponding Author Contact Information] , [E-mail The Corresponding Author] , a, b, C. Eisenmenger-Sittnera, H. Bangerta and G. Korbb

a Institute of Solid State Physics, Vienna University of Technology, A-1040, Wien, Austria
b Department of Materials and Production Engineering, ARC Seibersdorf Research, A-2444, Seibersdorf, Austria

Received 16 June 2002; revised 1 August 2002; accepted 24 September 2002. ; Available online 12 April 2003.


Abstract

Copper carbon composites are a prospective material for application as heat sink material in thermal management applications. One of the main drawbacks of this material combination is the lack of adhesion between copper and carbon. In order to improve the interfacial properties in this system a basic investigation on carbon substrates was done, where the influence of an adhesion promoting intermediate layer was investigated. Besides the study of the influence of a Ti intermediate layer on the growth mode and surface topography of a copper coating, the diffusion of Ti after a heat treatment was analysed by using Auger electron spectroscopy.

http://aleph.ub.tuwien.ac.at/F?base=tuw01&func=find-c&ccl_term=AC04405735

http://www.sciencedirect.com/science?_ob=ArticleURL&_udi=B6TW4-48BSS8Y-1H&_user=103677&_handle=W-WA-A-A-CD-MsSAYWA-UUA-AUZCWVAVYU-AECWVUCD-CD-U&