[Zurück]


Zeitschriftenartikel:

Yu.D. Yagodkin, A.S. Lileev, E.N. Grishina, M. Reissner, W. Steiner:
"Hard magnetic nanocrystalline alloys of Fe-O system";
Journal of Materials Science, 39 (2004), S. 5255 - 5258.



Kurzfassung englisch:
Hard magnetic nanocrystalline alloys of Fe-O system

Yu. D. Yagodkin
Moscow State Institute of Steel and Alloys, Leninsky prospekt 4, 119991 Moscow, Russia. yag52@mail.ru

A. S. Lileev
Moscow State Institute of Steel and Alloys, Leninsky prospekt 4, 119991 Moscow, Russia

E. N. Grishina
Moscow State Institute of Steel and Alloys, Leninsky prospekt 4, 119991 Moscow, Russia

M. Reissner
Institute of Solid State Physics, Vienna University of Technology, Wiedner Hauptstraße 8-10, A-1040 Vienna, Austria

W. Steiner
Institute of Solid State Physics, Vienna University of Technology, Wiedner Hauptstraße 8-10, A-1040 Vienna, Austria

Abstract
The structure and magnetic properties of nanocrystalline Fe-O alloys produced by high-energy ball milling and subsequent low-temperature annealing were investigated. The Fe2O3, FeO and Fe powders as well as their mixtures were used as starting materials. The structure was studied by X-ray diffraction analysis, Mössbauer spectroscopy and scanning electron microscopy. The magnetic properties were measured in vibrating sample magnetometers at room temperature and 4.2 K. The nanocrystalline composite alloys obtained as a result of the milling contained FeO and [alpha]-Fe with an average crystallite size of 15-20 nm as well as an amorphous phase, which was identified as a solid solution of oxygen in iron. However, alloys subjected to subsequent annealing contained only [alpha]-Fe and Fe3O4 with an average crystallite size of about 20 nm. Unlike the starting materials the produced powders had properties which are characteristic of hard magnetic materials. For example, the powder produced by the milling of Fe2O3+50% [alpha]-Fe mixture followed by annealing had the following properties at 300 K: intrinsic coercive force [mu]0Hc = 0.067 T, remanence Br = 0.48 T, energy product (BH)max = 9 kJ/m3.


Online-Bibliotheks-Katalog der TU Wien:
http://aleph.ub.tuwien.ac.at/F?base=tuw01&func=find-c&ccl_term=AC04970112

Elektronische Version der Publikation:
doi:10.1023/B:JMSC.0000039222.53614.e6


Erstellt aus der Publikationsdatenbank der Technischen Universität Wien.