[Back]


Publications in Scientific Journals:

C. Poletti, F. Warchomicka, R. Okruch, H. Knoblich:
"Microstructural features of AZ31 deformed at high temperatures";
Praktische Metallographie - Practical Metallography, 47 (2010), 10; 3781 - 3789.



English abstract:
An as cast AZ31 magnesium alloy was investigated using light microscopy (LOM) and electron backscatter diffraction (EBSD) methods to quantify and describe the deformation mechanisms activated at high temperatures. Compression tests were carried out by means of a
GleebleŽ1500 device in the range of 320-500°C and 0.03-10 s -1 of strain rate. Deformed samples were simulated by finite elements method to correlate the microstructure with the local deformation parameters. EBSD measurements were used to distinguish and quantify the new recrystallized grains and to characterize the misorientation
distribution. These results helped to determine the grain size distribution with the temperature and the strain rate by LOM
pictures. Dynamic recrystallization is denoted by necklace microstructure, and twinning promotes the recrystallization nucleation. At high temperature and slow strain rate recovery takes
place followed by continuous dynamic recrystallization.

German abstract:
Eine AZ31-Magnesiumlegierung im Gusszustand wurde mittels Lichtmikroskopie (LIMI) und Elektronenrückstreubeugung (EBSD) untersucht, um die bei hohen Temperaturen ausgelösten
Verformungsmechanismen quantitativ zu bestimmen und zu beschreiben. Mit einer GleebleŽ1500-Apparatur wurden Druckversuche im Temperaturbereich von 320-500°C und bei einer Verformungsgeschwindigkeit von 0,03-10 s -1 durchgeführt. Verformte Proben wurden anhand der Methode der finiten Elemente simuliert, um eine Korrelation der Mikrostruktur mit den lokalen Verformungsparametern zu ermöglichen. Es wurden EBSD-Messungen eingesetzt, um die neuen rekristallisierten Körner zu differenzieren und zu quantifizieren und die Misorientierungsverteilung zu beschreiben. Die Ergebnisse dienten der Bestimmung der Korngrößenverteilung bei einer bestimmten Temperatur und Verformungsgeschwindigkeit anhand von Aufnahmen der lichtoptischen Mikroskopie. Die Dynamische Rekristallisation ist durch eine
kettenartige Mikrostruktur gekennzeichnet, und Zwillingsbildung fördert die Rekristallisation mit Keimbildung. Bei hohen Temperaturen und geringer Verformungsgeschwindigkeit findet eine
Erholung mit nachfolgender kontinuierlicher dynamischer Rekristallisation statt.

Created from the Publication Database of the Vienna University of Technology.