Talks and Poster Presentations (with Proceedings-Entry):
T. Schumi, F. Bammer, D. Schuöcker, G. Humenberger, B. Holzinger:
"Integration of high power lasers in bending tools";
Talk: Laser Assisted Net Shape Engineering,
Erlangen (invited);
2010-09-21
- 2010-09-24; in: "Proceedings of the LANE 2010",
Elsevier,
Physics Procedia Vol.5, Part 2
(2010),
ISSN: 1875-3892;
205
- 209.
English abstract:
The integration of high power lasers into bending tools creates a possibility to bend brittle materials with
conventional presses. A diode laser, which is based on 200W-laser-bars and a solid state laser with 3kW are used in
this work. By heating the material within a narrow zone the ductility is increased and the forming process can be
enabled. The assembly of the heat source within the bending tools is a prerequisite in order to feed energy into the
workpiece before, during and after the forming process. As a result the heating and forming process can be
optimized regarding any material.
German abstract:
Abkanten spröder Bleche mit Hilfe von Diodenlaser-Erwärmung
Keywords:
Bending; Warm-Forming; Diode Lasers
"Official" electronic version of the publication (accessed through its Digital Object Identifier - DOI)
http://dx.doi.org/10.1016/j.phpro.2010.08.045
Created from the Publication Database of the Vienna University of Technology.