Talks and Poster Presentations (with Proceedings-Entry):
A. Alamin Dow, A. Bittner, U. Schmid, N. Kherani:
"Design, Fabrication and Characterization of a Micromachined Piezoelectric Energy Harvester Excited by Ambient Vibrations";
Talk: SPIE Microtechnologies 2013,
Grenoble, France;
2013-04-24
- 2013-04-26; in: "Proceedings of SPIE",
8763
(2013),
ISSN: 0277-786x.
English abstract:
This research work presents the design, fabrication and characterization of micromachined piezoelectric energy harvester
stimulated by ambient random vibrations utilizing AlN as a piezoelectric material. The device design consists of a silicon
cantilever beam on which AlN is sandwiched between two electrodes and a silicon seismic mass at the end of the
cantilever beam. The generated electric power of the devices was experimentally measured at various acceleration levels.
A maximum power of 34 μW was obtained at an acceleration value of 2g for the device which measures 5.6 x 5.6 mm2.
Various unpackaged devices were tested and assessed in terms of the generated power and resonant frequency at various
acceleration values.
Keywords:
piezoelectricity, energy harvesting, vibration, aluminum nitride
Created from the Publication Database of the Vienna University of Technology.