[Back]

F. Ademaj, B. Krasniqi:
"Optimization of Assigned Power and Bandwidth in Macro-Femto Cellular System using Geometric Programming";
Talk: ICCVE - International Conference on Connected Vehicles & Expo, Vienna, Austria; 11-03-2014 - 11-07-2014; in: "International Conference on Connected Vehicles & Expo (ICCVE 2014)", IEEE, (2014), ISSN: 2378-1289; 641 - 646.

Femtocells are used to increase indoor coverage and network capacity of traditional macro BS deployments. Interference is key performance limiting factor in such heterogeneous mobile networks. In order to minimize the interference between macro- and femto base stations, we use a constrained optimization technique to optimally allocate bandwidth and power to macrocell and femtocell UEs. Matlab's CVX library is used to solve the optimization problem. Depending on the UEs' position from their serving base station (macro or femto) and
their demand for higher data rates than minimum requirement data rate, the optimal power and bandwidth is assigned to each base station.

Femtocells are used to increase indoor coverage and network capacity of traditional macro BS deployments. Interference is key performance limiting factor in such heterogeneous mobile networks. In order to minimize the interference between macro- and femto base stations, we use a constrained optimization technique to optimally allocate bandwidth and power to macrocell and femtocell UEs. Matlab's CVX library is used to solve the optimization problem. Depending on the UEs' position from their serving base station (macro or femto) and
their demand for higher data rates than minimum requirement data rate, the optimal power and bandwidth is assigned to each base station.

HetNet; transmit power; bandwidth; max-min-rate; femtocells

http://dx.doi.org/10.1109/ICCVE.2014.7297627

http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=7297627&newsearch=true&queryText=fjolla%20ademaj