TU Home
Diese Publikationsliste wurde automatisch aus den Publikationsdaten der Fakultät für Elektrotechnik und Informationstechnik erstellt. Wenn Sie komplexere Suchabfragen vornehmen wollen, rufen Sie bitte die Seite "Publikationen der Fakultät" direkt auf, oder verwenden Sie die globale Suchfunktion der Publikationsdatenbank der Technischen Universität Wien!

 Publikationsdatenbank Home  

Publikationsliste für Angehörige von
E366 - Institut für Sensor- und Aktuatorsysteme
E366-02 Mikrosystemtechnik
E366-02 (Personen ohne Gruppen-Zuordnung)
als Autorinnen / Autoren bzw. wesentlich beteiligte Personen
Vorträge und Posterpräsentationen (mit Tagungsband-Eintrag)

1145 Datensätze (1986 - 2021)

Die Publikationen der Fakultät für Elektrotechnik und Informationstechnik sind erst ab dem Jahr 1996 vollzählig in der Publikationsdatenbank enthalten. Publikationen aus den Jahren vor 1996 können, müssen aber nicht in der Datenbank vorhanden sein.


Vorträge und Posterpräsentationen (mit Tagungsband-Eintrag)

  1. K. Zweymüller, K. Judmann, G. Reinisch, F. Lintner, C. Lhotka:
    "Degenerative hip disorder: metal on metal, hip replacement";
    Vortrag: SICOT-Conference 2002, Paris; 09.08.2002 - 01.09.2002; in: "SICOT Conference Abstracts", (2002), S. 298.
  2. S. Zoppel, J. Zehetner, L. Musiejovsky, H. Hauser, J. Nicolics:
    "Laser Micromachining for GMI-Sensors";
    Poster: European Magnetic Sensors & Actuators Conference, Bilbao, Spanien; 03.07.2006 - 05.07.2006; in: "Book of Abstracts", (2006), S. 147.
  3. S. Zoppel, St. Partl, J. Nicolics, G.A. Reider, J. Zehetner:
    "Laserablation und ihre Anwendung in der Mikrotechnik";
    Vortrag: FH Vorarlberg Symposium Mikrosystemtechnik für die Industrie, Dornbirn; 30.05.2006 - 31.05.2006; in: "Dornbirner Mikrotage 2006 - Technologie, Verfahren und Anwendungen der Mikrotechnik", (2006), S. 20 - 24.
  4. D. Zivanov, M. Stojadinovic, A. Vujanic, S. Jejei:
    "Determiniation of Optimal Parameters of Micromachined Inductive Sensors";
    Vortrag: ISEF 99, Pavia, Italy; 23.09.1999 - 25.09.1999; in: "Proc. of ISEF 99", (1999), S. 369 - 372.
  5. V. Ziegler, A. Stehle, G. Georgiev, B. Schönlinner, U. Prechtel, H. Seidel, U. Schmid:
    "SP48T Module Architecture and RF-MEMS Multi-Throw Switches for a Multi-beam Antenna Measurement Set-Up at K- and Ka-Band";
    Vortrag: 39th European Microwave Conference 2009, Rom, I; 28.09.2009 - 02.10.2009; in: "Proceedings of the 39th European Microwave Conference 2009", (2009), ISBN: 978-2-87487-011-8; S. 1128 - 1131.

    Zusätzliche Informationen
  6. W. Zhang, F. Franek, A. Matzner:
    "A Theoretical and Experimental Investigations on the Pore Structure of Sintered Bearings";
    Vortrag: World Congress on Powder Metallurgy + Particulate Materials, Washington, DC; 16.06.1996 - 21.06.1996; in: "Proceedings PM²TEC ´96", (1996), S. 000.
  7. C. Zeilmann, T. Haas, A. Backes, U. Schmid:
    "Micro Fluidic Mass Flow Sensor Concept for Functional Ceramic Circuits";
    Vortrag: IMAPS/ACerS 8th International CICMT Conference and Exhibition (2012), Erfurt, D; 16.04.2012 - 19.04.2012; in: "Proceedings", (2012), S. 181 - 190.
  8. J. Zehetner, G. Langer, M. Riester, M. Mündlein, J. Nicolics, R. Houbertz:
    "Thermal Analyses of a Multilayer with Embeded Vertical-Cavity Surface Emitting Lasers";
    Vortrag: IEEE International Conference on Polymers & Adhesives (Polytronic), Tokyo, japan; 15.01.2007 - 18.01.2007; in: "Proceedings Polytronic 2007", (2007), S. 245 - 250.
  9. G. Zehethofer, F. Franek, H. Störi:
    "Wear mechanism analysis of a doctor blade sliding against a coated cylinder";
    Vortrag: Nordtrib 2008 - 13th Nordic Symposium on Tribology, Tampere; 10.06.2008 - 13.06.2008; in: "Proceedings", (2008), ISBN: 978-952-15-1961-1; S. 127.

    Zusätzliche Informationen
  10. T. Zawada, A. Dziedzic, L. Golonka, G. Hanreich, J. Nicolics:
    "Temperature Field Analysis in a Low Temperature Cofire Ceramic Microsystem";
    Poster: European Microelectronics, Packaging and Interconnection Symposium (IMAPS 2000), Prag, Czech Republic; 18.06.2000 - 20.06.2000; in: "Symposium Proceedings", (2000), S. 388 - 393.
  11. C Zarfl, P Schmid, U. Schmid:
    "A Novel Miniaturised Sensor for Combined Static and Dynamic Pressure Measurements in Harsh Environments";
    Poster: 30th Eurosensors Conference, EUROSENSORS 2016, Budapest, Hungary; 04.09.2016 - 07.09.2016; in: "Proceedings of the Eurosensors 2016", Procedia Engineering / Elsevier, 168 (2016), ISSN: 1877-7058; S. 782 - 785.

    Zusätzliche Informationen
  12. C Zarfl, P Schmid, G Balogh, U. Schmid:
    "TiAlN Thin Films as High Temperature Strain Gauges";
    Poster: EUROSENSORS 2014 - 28th European Conference on Solid-State Transducers, Brescia, I; 07.09.2014 - 10.09.2014; in: "Procedia Engineering", Elsevier, 87 (2014), ISSN: 1877-7058; S. 136 - 139.

    Zusätzliche Informationen
  13. P. Wurmsdobler, R. Duffait, T. Messaoudi, W. Brenner:
    "A Torque Testing Stage for Rotating Micro-Electro-Mechanical Devices";
    Vortrag: ISROMAC-9, Honolulu, Hawaii, USA; 10.02.2002 - 14.02.2002; in: "Transport Phenomea and Dynamics of Rotating Machinery ", Y. Tsujimoto (Hrg.); Pacific Center of Thermal-Fluids Engineering, Honolulu, Hawaii, USA (2002), S. 1 - 6.
  14. T. Wopelka, M. Jech, C. Lenauer, F. Novotny-Farkas, F. Franek:
    "Comparison of wear measurements of component and engine bench tests using radioactive isotopes";
    Vortrag: 51. Tribologie-Fachtagung, Göttingen, D; 27.09.2010 - 29.09.2010; in: "Reibung, Schmierung und Verschleiß", Gesellschaft für Tribologie e.V., (2010), ISBN: 978-3-00-032180-1.

    Zusätzliche Informationen
  15. T. Wopelka, M. Jech, F. Franek:
    "Einfluss von Biodiesel auf die Schmierfähigkeit von Motoröl";
    Vortrag: ÖTG-Symposium 2008, Wr. Neustadt; 20.11.2008; in: "Symposium 2008 - Innovationen bei Werk- und Schmierstoffen für moderne, umweltorientierte Tribosysteme", ÖTG, (2008), ISBN: 978-3-901657-30-6; S. 121 - 129.

    Zusätzliche Informationen
  16. T. Wopelka, M. Jech, F. Franek:
    "Findings and General Achievements of WEMESURF";
    Vortrag: 17th International Colloquium Tribology, Ostfildern, D; 19.01.2010 - 21.01.2010; in: "Solving Friction and Wear Problems", Technische Akademie Esslingen, Ostfildern, (2010), ISBN: 3-924813-80-9.

    Zusätzliche Informationen
  17. T. Wopelka, E. Corniani, C. Lenauer, M. Jech, F. Franek:
    "Continuous Wear Measurement of Bearing Balls";
    Vortrag: Failures Of Rolling Bearings, Bratislava; 21.10.2010 - 22.10.2010; in: "FAILURES OF ROLLING BEARINGS - Proceedings", (2010), S. 82 - 85.

    Zusätzliche Informationen
  18. T. Wolbank, R. Wöhrnschimmel, J. Machl, H. Hauser:
    "Influence of Induction Machine Lamination Design on Saturation Saliencies detectable by a Transient Electrical Excitation";
    Vortrag: International Conference on Power Electronics Technology and Applications, Palm Springs, CA, USA; 24.02.2003 - 26.02.2003; in: "Proceedings of International Conference on Power Electronics Technology and Applications", (2003), ISBN: 0-88986-335-0; S. 345 - 350.

    Zusätzliche Informationen
  19. T. Wolbank, R. Wöhrnschimmel, H. Hauser:
    "Dynamic core modelling using a phenomenological eddy current field";
    Vortrag: 46th Annual Conference on Magnetism & Magnetic Materials, Seattle, USA; 12.11.2001 - 16.11.2001; in: "Proceedings of the 46th Annual Conference on Magnetism & Magnetic Materials", Session FP (2001), S. 268.

    Zusätzliche Informationen
  20. T. Wolbank, R. Wöhrnschimmel, H. Hauser:
    "Modeling Inverter Fed Induction Machines including Transient Magnetic Hysteresis";
    Vortrag: Joint European Magnetic Symposia JEMS, Grenoble, Frankreich; 28.08.2001 - 01.09.2001; in: "JEMS'01 Abstracts", (2001), S. 123.
  21. T. Wolbank, R. Wöhrnschimmel, H. Hauser:
    "Transient Magnetic Modelling of Sensorless Controlled Induction Machines";
    Vortrag: IEEE International Magnetics Conference, Amsterdam, The Netherlands (eingeladen); 28.04.2002 - 02.05.2002; in: "Digest Intermag Europe 2002", (2002), ISBN: 0-7803-7365-0; S. FE 01.

    Zusätzliche Informationen
  22. T. Wolbank, R. Wöhrnschimmel, H. Hauser:
    "Two dimensional transient calculation of induction machines excited with voltage pulses covering hysteresis";
    Poster: 11th Intern. Symposium on Theoretical Electrical Engineering, Linz, Austria; 19.08.2001 - 22.08.2001; in: "Proceedings ISTET '01", K. Schlacher, R. Weigel, A. Kugi (Hrg.); Springer, Vol. 2 (2) (2001), ISBN: 3-9501491-0-4; S. 497 - 500.
  23. T. Wolbank, R. Wöhrnschimmel, M. Diakite, B. Haidvogl, H. Hauser:
    "A Model to determine the transient behaviour of ferromagnetic materials in inverter-fed electrical machines";
    Poster: Int. Conference on Electrical Machines (ICEM 2000), Espoo Finland; 28.08.2000 - 30.08.2000; in: "International Conference on Electrical Machines", (2000), ISBN: 951-22-5097-7; S. 1666 - 1670.

    Zusätzliche Informationen
  24. T. Wolbank, J. Machl, R. Wöhrnschimmel, H. Hauser:
    "Interaction of induction machines fundamental wave design and asymmetries in the transient electrical behavior caused by saturation";
    Vortrag: IEEE International Conference on Industrial Electronics Control and Instrumentation (IECON), Roanoke, Virginia, USA (eingeladen); 02.11.2003 - 06.11.2003; in: "Proceedings of International Conference on Industrial Electronics Control and Instrumentation", (2003), ISBN: 0-7803-7907-1; S. 1453 - 1459.
  25. T. Wolbank, J. Machl, P. Macheiner, H. Hauser:
    "Extraction and Elimination of Induction Machines Inherent Asymmetry caused by Lamination Material Anisotropy";
    Vortrag: IEEE International Conference on Power Electronics and Drive Systems (PEDS), Singapore; 17.11.2003 - 20.11.2003; in: "Proceedings of International Conference on Power Electronics and Drive Systems", (2003), ISBN: 0-7803-7886-5; S. 508 - 513.
  26. T. Wolbank, J. Machl, H. Hauser, P. Macheiner:
    "Anisotropy in Induction Machine Lamination and its Influence on Mechanical Sensorless Control and Condition Monitoring";
    Poster: EPE, Toulouse, France; 02.09.2003 - 04.09.2003; in: "Proceedings of European Conference on Power Electronics and Applications (EPE)", (2003), ISBN: 90-75815-07-7.
  27. T. Wolbank, J. Machl, H. Hauser, P. Macheiner:
    "Lamination Material Anisotropy and Its Influence on the Operation of Inverter-Fed Induction Machines";
    Vortrag: INTERMAG 2003 (International Magnetics Conference Boston, March 30 - April 3), Boston, Massachusetts; 28.03.2003 - 03.04.2003; in: "INTERMAG 2003 Digest CD-ROM", (2003), ISBN: 0-7803-7647-1; 2 S.
  28. T. Wolbank, J. Machl, H. Hauser:
    "Current Sensors for Shaft-Sensorless Control of Inverter Fed Induction Machines - Industrially Used Sensors vs. New Current Derivative Sensors";
    Vortrag: IEEE Instrumentation and Measurement Technology Conference (IMTC), Vail, CO, USA; 20.05.2003 - 22.05.2003; in: "IMTC 2003 Proceedings", (2003), ISBN: 0-7803-7705-2; S. 595 - 599.
  29. T. Wolbank, J. Machl, H. Hauser:
    "Influence of Rotor Shielding on the Detection of Induction Machine Rotor Position";
    Poster: 5th European Magnetic Sensors and Actuators (EMSA 2004), Cardiff, UK; 04.07.2004 - 07.07.2004; in: "Book of Abstracts - EMSA 2004", (2004), S. M-O.4.
  30. T. Wolbank, J. Machl, H. Hauser:
    "Separating Anisotropic Material Effects in the Control Signals of Inverter-Fed AC Machines";
    Poster: International Conference on Magnetism, Roma, Italy; 27.07.2003 - 01.08.2003; in: "ICM 2003 Abstracts", (2003), S. 533.
  31. T. Wolbank, P. Macheiner, J. Machl, H. Hauser:
    "Detection of Rotor Eccentricity Caused Air Gap Asymmetries in Inverter Fed AC Machines Based on Current Step Response";
    Vortrag: IEEE International Conference on Power Electronics and Drive Systems (PEDS), Singapore; 17.11.2003 - 20.11.2003; in: "Proceedings of International Conference on Power Electronics and Drive Systems", (2003), ISBN: 0-7803-7886-5; S. 468 - 473.
  32. T. Wolbank, P. Macheiner, J. Machl, H. Hauser:
    "Simulation and Observer Based Detection of Airgap Asymmetries Caused by Rotor Eccentricity in Inverter Fed AC Machines";
    Vortrag: IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives SD, Atlanta, Georgia, USA; 24.08.2003 - 26.08.2003; in: "Proceedings of IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives", (2003), ISBN: 0-7803-7838-5; S. 327 - 332.
  33. E Wistrela, A. Bittner, U. Schmid:
    "Impact of Titan Layer and Silicon Substrate Properties on the Microstructure of c-axis Oriented AlN Thin Films";
    Vortrag: Smart Sensors, Actuators and MEMS VII 2015, Barcelona, Spain; 04.05.2015 - 06.05.2015; in: "Proc. of SPIE Vol. 9517-9520", SPIE, 9517 (2015), ISSN: 0277-786x; Paper-Nr. 95171E, 7 S.

    Zusätzliche Informationen
  34. J. Wissenwasser, M. Vellekoop, J. Nicolics:
    "Silicone-based Encapsulation of a Cell Culture Measurement Device under Physiological Conditions";
    Poster: 32nd International Spring Seminar on Electronics Technology (ISSE), Brno, Czech Republic; 13.05.2009 - 17.05.2009; in: "ISSE 2009 Conference Proceedings", (2009), ISBN: 978-1-4244-4260-7; S. 126 - 127.
  35. M. Wieger, H. Hauser:
    "Electromagnetic Regeneration of Lead Accumulators";
    Poster: 10th International Symposium on Applied Electromagnetics and Mechanics, Tokoy, Japan; 13.05.2001 - 16.05.2001; in: "Proceedings of the 10th International Symposium on Applied Electromagnetics and Mechanics", T. Takagi, M. Uesaka (Hrg.); (2001), S. 551 - 552.
  36. M. Wieger, H. Hauser:
    "Electromagnetic Regeneration of Lead Acid Batteries";
    Poster: 9th Int. Symposium on Non-Linear Electromagnetic Systems (ISEM), Pavia, Italy; 10.05.1999 - 12.05.1999; in: "ISEM 99 - Abstracts", (1999), S. 50.

    Zusätzliche Informationen
  37. F. Wenzl, C. Sommer, P. Hartmann, P. Pachler, H. Hoschopf, G. Langer, P.L. Fulmek, J. Nicolics:
    "White light quality of phosphor converted leds from a phosphor materials perspective of view: an Evaluation based on combined thermal and optical simulations";
    Vortrag: Twelfth International Conference on Solid State Lighting and Fourth International Conference on White LEDs and Solid State Lighting, an Diego, California, USA (eingeladen); 12.08.2012; in: "Proceedings of SPIE 8484", (2012).
  38. F. Wenzl, C. Sommer, P. Hartmann, P. Pachler, H. Hoschopf, G. Langer, P.L. Fulmek, J. Nicolics:
    "White light quality of phosphor converted light‐emitting diodes from a materials perspective of view";
    Vortrag: 2nd European Energy Conference, Maastricht, the Netherlands; 17.04.2012 - 20.04.2012; in: "Conference Proceedings", (2012), S. 1.
  39. F. Wenzl, W. Nemitz, L. Kuna, C. Sommer, P.L. Fulmek, J. Nicolics, P. Pachler, H. Hoschopf, F. Schrank, G. Langer, P. Hartmann:
    "Foil based optical elements for beam shaping and color homogenization of phosphor converted white LED sources";
    Vortrag: SPIE - Optics and Photonics 2014, San Diego, USA; 21.08.2014; in: "Proceedings of SPIE 2014", (2014), 1 S.
  40. F. Wenzl, P.L. Fulmek, C. Sommer, P. Hartmann, P. Pachler, H. Hoschopf, F. Schrank, G. Langer, J. Nicolics:
    "The impact of the color conversion element configuration on its thermal response in phosphor converted LEDs";
    Poster: SPIE Optics + Photonics 2013, San Diego, California, USA; 25.08.2013 - 29.08.2013; in: "Proc. of SPIE Vol. 8835", (2013), S. 1 - 8.
  41. M. Weilguni, W. Smetana, G. Radosavljevic, J. Nicolics, W. Goebl, A. Hofmann:
    "Low Temperature Co-fired Ceramics Processing Parameters Governing the Performance of Miniaturized Force Sensor";
    Poster: IMAPS/ACerS 8th International CICMT Conference and Exhibition (2012), Erfurt, D; 16.04.2012 - 19.04.2012; in: "Proc. of 8th Conf. and Exhibition on Ceramic Interconnect and Ceramic Microsystems Technology (CICMT)", (2012), S. 411 - 416.
  42. M. Weilguni, W. Smetana, W. Kausel:
    "Influence of Lamination Parameters on Mechanical Properties of LTCC tapes";
    Poster: 34th International Microelectronics and Packaging IMAPS-CPMT Poland Conference, Wroclaw; 22.09.2010 - 25.09.2010; in: "Book of Abstracts", (2010), ISBN: 978-83-917701-8-4; S. 234.
  43. M. Weilguni, W. Smetana, A. Hofmann, G. Radosavljevic, W. Goebl, J. Nicolics:
    "A ring-shaped LTCC/HTCC sensor for detection of finger forces in clarinet playing";
    Poster: IEEE Sensors 2012, Taipei, Taiwan; 28.10.2012 - 31.10.2012; in: "Conference Proceedings", (2012), ISBN: 978-1-4577-1767-3; S. 1116 - 1119.
  44. M. Weilguni, W. Smetana, M. Edetsberger, G. Köhler:
    "Bladder Cancer Cell Imaging System";
    Poster: 32nd International Spring Seminar on Electronics Technology (ISSE), Brno, Czech Republic; 13.05.2009 - 17.05.2009; in: "ISSE 2009 Conference Proceedings", (2009), ISBN: 978-1-4244-4260-7; S. F13:1 - F13:4.
  45. M. Weilguni, R. Medek, W. Smetana, W. Kausel:
    "PTC Temperature Sensors on Curved LTCC-Layers";
    Poster: 33rd International Spring Seminar on Electronics Technology (ISSE 2010), Warsaw, Poland; 12.05.2010 - 16.05.2010; in: "Book of Abstracts", (2010), ISBN: 978-83-7207-874-2; S. 96 - 97.
  46. M. Weilguni, M. Franz, N. Slyusar:
    "Feasibility Study and Life Cycle Energy Balance of Thermoelectric Generator Modules for Automotive Applications";
    Poster: 35th International Spring Seminar on Electronics Technology (ISSE 2012), Bad Aussee; 09.05.2012 - 13.05.2012; in: "Book of Abstracts", (2012), ISBN: 978-3-85465-015-7; S. 196 - 197.
  47. M. Weilguni, I. Atassi, W. Gschohsmann, W. Smetana, J. Nicolics, W. Goebl:
    "An Analytical Model for a Two-Layer LTCC Beam";
    Vortrag: ISSE 2011, Tatranska Lomnica, Slovakia; 11.05.2011 - 13.05.2011; in: "Proceedings of the 34th International Spring Seminar on Electronics Technology", IEEE Xplore, (2011), ISBN: 978-1-4577-2112-0; S. 481 - 485.
  48. X. Wang, B. Balluch, W. Smetana, G. Stangl:
    "Optimization of Cavity Fabrication for Micro - Fluidic Systems";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Budapest, Hungary; 07.05.2008 - 11.05.2008; in: "ISSE 2008 Conference Proceedings", (2008), ISBN: 978-963-06-4915-5; S. 420 - 425.
  49. X. Wang, B. Balluch, W. Smetana, G. Stangl:
    "Optimization of LTCC-channel Fabrication for Micro-Systems";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Budapest, Hungary; 07.05.2008 - 11.05.2008; in: "Abstract Proceedings - Reliability and Life-time Prediction", (2008), ISBN: 978-963-06-4915-5; S. 204 - 205.
  50. N. Wang, T. O`Donnell, H. Hauser:
    "Application of a Hysteresis Model to High Frequency Micro-Transformers";
    Poster: International Conference on Magnetism, Roma, Italy; 27.07.2003 - 01.08.2003; in: "ICM 2003 Abstracts", (2003), S. 531.
  51. A. Vujanic, N. Simicic, H. Detter, F. Franek, W. Brenner, G. Popovic, N. Delic-Adamovic:
    "Small torque measurements using micromachined silicon cross-spring structure";
    Vortrag: 5th International Conference on Micro Electro, Opto, Mechanical Systems and Components, Potsdam; 17.09.1996 - 21.09.1996; in: "Micro System Technologies", H. Reichl, A. Heuberger (Hrg.); VDE-Verlag GmbH, Berlin-Offenbach (1996).
  52. A. Vujanic, R. Pavelka, C. Kment, D. Adamovic:
    "Entwicklung eines vollimplantierbaren Hörgerätes";
    Vortrag: Informationstagung Mikroelektronik (ME), Wien; 10.10.2001 - 11.10.2001; in: "ME 01", D. Donhoffer, G. Fiedler (Hrg.); Im Eigenverlag des ÖVE, Nr. 26/Wien (2001), ISBN: 3-85133-022-6; S. 363 - 370.
  53. A. Vujanic, R. Pavelka, N. Delic-Adamovic, D. Adamovic, G. Popovic, W. Brenner, M.C. Tomic:
    "A Method for Fabrication of Medical Microstructures using Electroplaing on Silicon Substrate";
    Vortrag: EMBEC 1999 European Medical and Biological Engineering Conference, Vienna, Austria; 04.11.1999 - 07.11.1999; in: "Proc. of EMBEC 1999", (1999), S. 1386 - 1387.
  54. A. Vujanic, R. Pavelka, N. Adamovic, C. Kment, S. Mitic, W. Brenner, G. Popovic:
    "Development of a Totally Implantable Hearing in Aid";
    Vortrag: International Conference on Microelectronics (MIEL), Nis, Yugoslavia; 12.05.2002 - 15.05.2002; in: "23rd International Conference on Microelectronics", Eigenverlag, Vol. 1 (2002), ISBN: 0-7803-7235-2; S. 235 - 238.
  55. A. Vujanic, S. Mitic, Z. Djinovic, D. Vujanic, R. Pavelka, M.C. Tomic, M. Cordes:
    "Development of a Fiber-Optical Microphone to be used in a Totally Implantable Hearing Aid (TIHA)";
    Vortrag: International Conference on Advancs in the Internet, Processing Systems and Interdisciplinary Research (IPSI 2004), Sveti Stefan, Montenegro; 02.10.2004 - 09.10.2004; in: "Proceeding of IPSI-2004 Montenegro", (2004), ISBN: 86-7466-117-3; S. 1 - 9.
  56. A. Vujanic, Z. Djinovic, M.C. Tomic, S. Mitic, R. Pavelka, D. Vujanic, C. Kment, M. Cordes:
    "Low-Power Implantable Vibrometer for Measurement of Nanometric Vibrations Inside Middle Ear";
    Vortrag: 1st Vienna International Conference on Micro- and Nano-Technology - Viennano'05, Vienna, Austria; 09.03.2005 - 11.03.2005; in: "1st Vienna International Conference on Micro- and Nano-Technology - Proceedings", Österreichische Tribologische Gesellschaft, Wien (2005), ISBN: 3-901657-17-7; S. 33 - 40.

    Zusätzliche Informationen
  57. A. Vujanic, Z. Djinovic, M.C. Tomic:
    "MOEMS based measurement systems for automotive applications";
    Vortrag: Dornbirner Mikrotechniktage, Dornbirn, Österreich; 30.05.2006 - 31.05.2006; in: "Dornbirner Mikrotechniktage 2006 - Technologie, Verfahren und Anwendungen der Mikrotechnik", (2006).
  58. A. Vujanic, N. Delic-Adamovic, M. Jakovljevic, W. Brenner, G. Popovic, H. Detter:
    "Silicon microstructure for precise measurements of mechanical moments";
    Vortrag: International Conference on Microelectronics (MIEL), Nis, Jugoslavia; 14.05.2000 - 17.05.2000; in: "Proc. Of MIEL 2000", (2000), S. 565 - 568.
  59. A. Vujanic, W. Brenner, N. Simicic, G. Popovic, A. Pauschitz:
    "A method for Fabrication of Medical Microstructures using Electroplating on Silicon Substrate"";
    Vortrag: EMBEC 1999 European Medical and Biological Engineering Conference, Vienna, Austria; 04.11.1999 - 07.11.1999; in: "Proc. of EMBAC", (1999), S. 1096 - 1097.
  60. G. Vorlaufer, A. Stadler, A. Pauschitz, F. Franek:
    "Bestimmung der Reibzahlcharakteristik von Friktionselementen aus Ruckgleit-Experimenten";
    Vortrag: 48. Tribologie-Fachtagung - GfT, Göttingen, Deutschland; 24.09.2007 - 26.09.2007; in: "Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen - Band 1", Gesellschaft für Tribologie e.V., (2007), ISBN: 978-3-00-022603-8.

    Zusätzliche Informationen
  61. G. Vorlaufer, A. Stadler, A. Pauschitz, F. Franek:
    "Simulationsgestützte Auswertung von tribometrischen Untersuchungen zur Reibzahlcharakterisierung";
    Vortrag: ÖTG-Symposium 2007, St. Pölten; 22.11.2007; in: "RELIABILITY ENGINEERING - Simulation und Monitoring von verschleißgefährdeten Systemen", (2007), ISBN: 978-3-901657-28-3; S. 35 - 44.

    Zusätzliche Informationen
  62. M. Vopálenský, P. Ripka, M. Tondra, H. Hauser:
    "Practical measurements on new types of magnetoresistive sensors";
    Vortrag: 8th Biennial Baltic Electronics Conference (BEC 2002), Tallinn, Estonia; 06.10.2002 - 09.10.2002; in: "Proceedings of the BEC 2002", (2002), S. 215 - 216.
  63. T. Voglhuber-Brunnmaier, E. Reichel, B. Jakoby, R. Beigelbeck, P.M. Mayrhofer, U. Schmid:
    "Fast method for the calculation of surface bending on circular multilayered piezoelectric structures";
    Poster: Sensors 2016, Orlando, Florida, USA; 30.10.2016 - 02.11.2016; in: "Proceedings of the IEEE Sensors 2016", IEEE, (2016), ISBN: 978-1-4799-8287-5; 3 S.

    Zusätzliche Informationen
  64. K. Varis, A.R. Baghai-Wadji:
    "Defect Modeling in Photonic Crystal";
    Vortrag: 11th Finnish Electromagnetics Meeting, Vaasa, Finland; 23.08.2001; in: "Proceedings of the 11th Finnish Electromagnetics Meeting", (2001), S. 1.
  65. K. Varis, A.R. Baghai-Wadji:
    "Hybrid Planewave/Finite-Difference Transfer method for Solving Photonic Crystals in Finite thickness Slabs";
    Vortrag: International Symposium on Electron Devices for Microwave and Optoelectronic Applications (EDMO), Vienna, Austria; 15.11.2001 - 16.11.2001; in: "Proceedings of EDMO 2001", (2001), S. 161 - 166.
  66. K. Varis, A.R. Baghai-Wadji:
    "Z-diagonalized Planewave/FD Approach for Analyzing TE Polarized Waves in 2D Photonic Crystals";
    Vortrag: Applied Computational Electromagnetics Society, Monterey, USA; 24.03.2003 - 28.03.2003; in: "Proceedings ACES", Applied Computational Electromagnetics Society Journal, (2003), ISSN: 1054-4887; S. 180 - 187.
  67. H. Varahram, M. Reissner, W. Steiner, H. Hauser:
    "Hallmagnetometer for External Static Fields up to 17 Tesla";
    Poster: Int. Symposium on Non-Linear Electromagnetic Systems (ISEM 95), Cardiff, Great Britain; 10.09.1995 - 20.09.1995; in: "Nonlinear Electromagnetic Systems; Studies in Applied Electromagnetics and Mechanics", A.J. Moses, A. Basak (Hrg.); IOS Press, Amsterdam, 10 (1996), ISBN: 90-5199-251-3; S. 796 - 799.
  68. H. Varahram, M. Reissner, W. Steiner, H. Hauser:
    "Determination of Inter- and Intragrain Critical Current Densities of YBCO Ceramics in High Fields by Hall Magnetometry";
    Poster: 4th Europ. Conference on Applied Superconductivity (EUCAS 99), Sitges, Portugal; 14.09.1999 - 17.09.1999; in: "EUCAS 99 - Abstracts", (1999), S. 144 - 145.
  69. J. Vanek, I. Szendiuch, W. Smetana, M. Unger:
    "Characterization of Laser Drilled Via Interconnections in LTCC Substrates";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Budapest, Hungary; 07.05.2008 - 11.05.2008; in: "Abstract Proceedings - Reliability and Life-time Prediction", (2008), ISBN: 978-963-06-4915-5; S. 262 - 263.
  70. J. Vanek, I. Szendiuch, W. Smetana, M. Unger:
    "Performance of Laser Machined and Metallized Via Holes in LTCC Tape Materials";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Budapest, Hungary; 07.05.2008 - 11.05.2008; in: "ISSE 2008 Conference Proceedings", (2008), ISBN: 978-963-06-4915-5; S. 548 - 552.
  71. J. Vanek, W. Smetana, M. Weilguni, I. Szendiuch:
    "Characterization of PTC resistor pastes applied in LTCC technology";
    Poster: 17th European Microelectronics and Packaging Conference 2009 (EMPC), Rimini, Italy; 15.06.2009 - 18.06.2009; in: "Proceedings of the European Microelectronics and Packaging Conference EMPC", (2009), ISBN: 978-0-615-29868-9; S. 1 - 5.
  72. B. Valentin, M. Mündlein, J. Nicolics, R. Chabicovsky:
    "Calibration of a Thin Film Sensor for Transepidermal Water Loss Measurement";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Wr. Neustadt, Austria; 19.05.2005 - 22.05.2005; in: "Book of Abstracts - 28th ISSE 2005", (2005), S. 84 - 85.
  73. B. Valentin, M. Mündlein, R. Chabicovsky, J. Nicolics:
    "Evaluation of a Novel Transepidermal Water Loss Sensor";
    Vortrag: 3rd IEEE Conference on Sensors (IEEE Sensors 2004), Vienna, Austria; 24.10.2004 - 27.10.2004; in: "CD-ROM Proceedings Sensor 2004", D. Rocha Wiese Meneses, P. Sarro, M. Vellekoop (Hrg.); (2004), ISBN: 0-7803-8692-2; S. 115 - 118.
  74. B. Valentin, M. Mündlein, R. Chabicovsky, J. Nicolics:
    "Novel Microsensor for the Measurement of the Transepidermal Water Loss of Human Skin";
    Vortrag: 12th International Conference (Sensors 2005), Nuremberg, Germany; 10.05.2005 - 12.05.2005; in: "Proceedings Volume I", (2005), S. 173 - 178.
  75. B. Valentin, M. Mündlein, R. Chabicovsky, J. Nicolics:
    "Thin Film Sensor for Transepidermal Water Loss Measurement - Calibration Method and Application to Human Skin";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Wr. Neustadt, Austria; 19.05.2005 - 22.05.2005; in: "Proceedings of 28th ISSE 2005", (2005), ISBN: 0-7803-9325-2; S. 64 - 68.
  76. M. Unger, H. Stahr, M. Morianz, J. Nicolics, F. Dosseul:
    "Miniaturized Power-Diode Package with Superior Thermal Performance using Embedding Technology";
    Vortrag: 39th International Spring Seminar on Electronics Technology (ISSE 2016), Pilsen, Czech Republic; 18.05.2016 - 22.05.2016; in: "Proceedings ISSE 2016", (2016), ISBN: 978-1-5090-1389-0; S. 97 - 105.
  77. M. Unger, W. Smetana, G. Radosavljevic, L. Zivanov, L. Nad, A. Maric:
    "A Wireless Readout Temperature Sensor Realized in LTCC-Technology";
    Poster: International Conference of IMAPS Poland Chapter, Pultusk, Poland; 21.09.2008 - 24.09.2008; in: "Abstracts Proceedings of the XXXII International Conference of IMAPS Poland Chapter", (2008), ISBN: 978-83-917701-6-0; 1 S.
  78. M. Unger, W. Smetana, G. Radosavljevic, L. Zivanov, A. Maric, T. Koch, J. Fleig, M. Ahrens:
    "High temperature characteristics of various LTCC-tapes";
    Vortrag: Second ReClMiCo Workshop: New Trends in Integrated Microsystems and Components, Novi Sad, Serbia; 05.03.2010 - 06.03.2010; in: "New Trends in Integrated Microsystems and Components", University of Novi Sad, Faculty of Technical Science, (2010), ISBN: 978-86-7892-287-9; S. 16 - 21.
  79. M. Unger, W. Smetana, T. Koch, G. Radosavljevic:
    "High Temperature Characteristics of various LTCC-Tapes";
    Poster: XXXIII International Conference of IMAPS Poland Chapter, Gliwice-Pszczyna, Poland; 21.09.2009 - 24.09.2009; in: "Proceedings of the XXXIII International Conference of IMAPS Poland Chapter", (2009), ISBN: 978-83-917701-7-7; S. 355 - 358.
  80. M. Unger, W. Smetana, W. Ehrenzweig:
    "Evaluation of LTCC (Low Temperature Cofired Ceramics)- tapes for mechanical sensor application";
    Vortrag: International Spring Seminar on Electronics Technology (ISSE), Cluj-Napoca, Romania; 09.05.2007 - 13.05.2007; in: "Abstracts Proceedings", (2007), ISBN: 978-973-713-174-4; S. 54 - 55.
  81. M. Unger, W. Smetana, W. Ehrenzweig:
    "Mechanical characteristics of LTCC (Low Temperature Cofired Ceramics) -tapes for mechanical application";
    Vortrag: International Spring Seminar on Electronics Technology (ISSE), Cluj-Napoca, Romania; 09.05.2007 - 13.05.2007; in: "Proceedings of 30th ISSE 2007", (2007), ISBN: 1-4244-1218-8; S. 59 - 64.
  82. M. Unger, G. Radosavljevic, W. Smetana, L. Zivanov, T. Koch:
    "Parameters Governing the Sensor Characteristic of Capacitive Temperature Sensors built up in LTCC-Technology";
    Poster: 32nd International Spring Seminar on Electronics Technology (ISSE), Brno, Czech Republic; 13.05.2009 - 17.05.2009; in: "ISSE 2009 Conference Proceedings", (2009), ISBN: 978-1-4244-4260-7; S. 112 - 113.
  83. M. Unger, J. Nicolics, H. Stahr, M. Morianz, F. Dosseul:
    "Thermal Performance of Novel Diode Packages";
    Vortrag: 39th International Spring Seminar on Electronics Technology (ISSE 2016), Pilsen, Czech Republic; 18.05.2016 - 22.05.2016; in: "Extended Abstracts ISSE 2016", (2016), ISBN: 978-1-5090-1389-0; S. 65 - 66.
  84. M. Unger, J. Nicolics, M. Morianz, H. Stahr, F. Dosseul, D. Manessis:
    "Thermomechanical comparison of novel embedded high-power packages using FEM-simulations";
    Vortrag: IMAPS Nordic Conference 2015, Helsingor, Denmark; 08.06.2015 - 09.06.2015; in: "Proceedings of IMAPS Nordic Conference 2015", (2015), S. 126 - 133.
  85. M. Unger, J. Nicolics, G. Langer, F. Wenzl, W. Nemitz, P.L. Fulmek, S. Schweitzer:
    "Thermal Performance Study of Direct Attached High-Power LEDs using an Innovative Submount Technique";
    Vortrag: Electronics System-Integration Technology Conference (ESTC 2014), Helsinki, Finland; 16.09.2014 - 18.09.2014; in: "Proceedings ESTC 2014", (2014), S. 171 - 176.
  86. M. Unger, J. Nicolics, G. Langer, F. Wenzl, W. Nemitz, P.L. Fulmek, S. Schweitzer:
    "Thermal Performance Study of Direct Attached High-Power LEDs using an Innovative Submount Technique";
    Vortrag: 37th International Spring Seminar on Electronics Technology, Dresden; 07.05.2014 - 11.05.2014; in: "Proceedings of the 37th ISSE", (2014), ISBN: 978-1-4799-4026-4; 6 S.
  87. M. Unger, J. Nicolics:
    "Discretisation and Data Reduction Algorithm for FE Modelling of Complex Multilayer PCBs with Embedded Components";
    Vortrag: 41st International Spring Seminar on Electronics Technology, "Research and Development Tendencies in Advanced Electronics Technologies", Zlatibor, Serbia; 16.05.2018 - 20.05.2018; in: "Book of Abstracts", (2018), ISBN: 9788660220426; S. 122 - 123.
  88. M. Unger, J. Fleig, M. Ahrens, W. Smetana:
    "Permittivity and Conductivity of Various LTCC-Tapes at High Temperature";
    Poster: 33rd International Spring Seminar on Electronics Technology (ISSE 2010), Warsaw, Poland; 12.05.2010 - 16.05.2010; in: "Book of Abstracts", (2010), ISBN: 978-83-7207-874-2; S. 94 - 95.
  89. M. Trcka, M. Reissner, H. Varahram, W. Steiner, H. Hauser:
    "Determination of Intergrain Critical Currenct Densities in YBCO Ceramics by Magnetic Measurements";
    Poster: 6th Int. Conference on Materials and Mechanisms of Superconductivity, Houston; 20.02.2000 - 25.02.2000; in: "M25 - MTSC 2000 Abstracts", (2000), S. 840.
  90. M. Trcka, M. Reissner, H. Varahram, W. Steiner, H. Hauser:
    "Grain Size Dependence of Intergrain Critical Current Densities in YBCO Ceramics";
    Poster: Int. Workshop on Critical Currents (IWCC 99), Wisconsin, USA; 07.07.1999 - 10.07.1999; in: "IWCC 99-Abstracts", (1999), S. 57 - 58.
  91. F. Toth, M. Dorfmeister, M. Schneider, U. Schmid, M. Kaltenbacher:
    "Non-linear analysis of a pre-stressed piezoelectric multi-layer plate";
    Vortrag: Viii Eccomas 2017, Madrid; 05.06.2017 - 08.06.2017; in: "VIII ECCOMAS Thematic Conference on Smart Structures and Materials SMART2017", (2017), S. 1307 - 1315.
  92. S. Toskov, G. Miskovic, A. Maric, N. Blaz, G. Radosavljevic:
    "The Effect of Water Presence on Properties of LTCC Dielectric Tapes";
    Poster: 48th International Conference on Microelectronics, Devices and Materials - MIDEM, Otocec, Slovenia; 19.09.2012 - 21.09.2012; in: "Conference Proceedings", (2012), ISBN: 978-961-92933-2-4; S. 285 - 290.
  93. S. Toskov, G. Miskovic, R. Glatz, G. Radosavljevic:
    "Design and Fabrication of Pt Micro-Heater Built on Alumina Substrate";
    Vortrag: 36th International Spring Seminar on Electronics Technology - ISSE 2013, Alba Iulia, Romania; 08.05.2013 - 12.05.2013; in: "Book of Abstracts", (2013), ISBN: 978-606-613-064-6; S. 26 - 27.
  94. S. Toskov, N. Krcic, G. Radosavljevic:
    "LTCC Lamination Process Using PMMA Fugitive Material";
    Vortrag: 37th International Spring Seminar on Electronics Technology, Dresden; 07.05.2014 - 11.05.2014; in: "Proceedings 37th Int. Spring Seminar on Electronics Technology", (2014), ISBN: 978-1-4799-4455-2; S. 22 - 23.
  95. M.C. Tomic, J. Elazar, A. Vujanic:
    "Fibre optic voltage measurement based on the electrostrictive effect using a 3x3 fibre-optic coupler and low coherence interferometric interrogation";
    Vortrag: EUROSENSORS XVII, Guimaraes, Portugal; 21.09.2003 - 24.09.2003; in: "Proceedings of the 17th European Conference on Solid-State Transducers", (2003), S. 1067 - 1070.
  96. M.C. Tomic, J. Elazar, Z. Djinovic:
    "Low Coherence Interferometric Fibre-Optic Voltage Measurement Based on the Electrostrictive Effect";
    Vortrag: ETRAN 2003, Herceg Novi, Serbien & Montenegro; 08.06.2003 - 13.06.2003; in: "Proceedings of the XLVII Conference", (2003), S. 161 - 164.
  97. M.C. Tomic, Z. Djinovic, A. Vujanic:
    "In-Line Concentration Measurement of Nanoliter Liquid Sample Using Low-Coherence Spectral Interferometry";
    Vortrag: 25th International Conference on Microelectronics - MIEL 2006, Belgrade, Serbia and Montenegro; 14.05.2006 - 17.05.2006; in: "25th International Conference on Microelectronics - Proceedings", IEEE, Volume 1 (2006), ISBN: 1-4244-0116-x; S. 233 - 236.
  98. C. Tomastik, M. Jech, T. Wopelka, F. Franek:
    "Comparative Nanoindentation Analysis Of Cylinder Liners From Tribological Model Experiments And From Internal Combustion Engines";
    Vortrag: 3rd Vienna International Conference on NANO-TECHNOLOGY - VIENNANO´09, Wien; 18.03.2009 - 20.03.2009; in: "3rd Vienna International Conference on NANO-TECHNOLOGY - VIENNANO´09", Österreichische Tribologische Gesellschaft, (2009), ISBN: 978-3-901657-32-0; S. 429 - 432.

    Zusätzliche Informationen
  99. J. Toledo, V Ruiz-Díez, J.L. Sànchez-Rojas, G. Pfusterschmied, M. Schneider, U. Schmid:
    "Wine Fermentation Sensor Based on Piezoelectric Resonators";
    Vortrag: IEEE Sensors 2017, Glasgow, Schottland; 29.10.2017 - 01.11.2017; in: "IEEE Sensors 2017 - Proceedings", IEEE, (2017), ISBN: 978-1-5090-1012-7; S. 1 - 3.

    Zusätzliche Informationen
  100. J. Toledo, V Ruiz-Díez, G. Pfusterschmied, U. Schmid:
    "Characterization of oscillator circuits for monitoring the density-viscosity of liquids by means of piezoelectric MEMS microresonators";
    Vortrag: SPIE Microtechnologies 2017, Barcelnoa, Spanien; 08.05.2017 - 10.05.2017; in: "Proc. SPIE 10246, Smart Sensors, Actuators, and MEMS VIII", SPIE, (2017), ISSN: 1996-756x; Paper-Nr. 102461I, 11 S.

    Zusätzliche Informationen
  101. J. Toledo, T. Manzaneque, V Ruiz-Díez, M. Kucera, G. Pfusterschmied, E Wistrela, W. Steindl, U. Schmid, J.L. Sànchez-Rojas:
    "Piezoelectric MEMS Resonators for Density and Viscosity Sensing in Engine Oil with Diesel Fuel";
    Vortrag: Transducers 2015, Anchorage, Alaska, USA; 21.06.2015 - 25.06.2015; in: "Proceedings of the 18th International Conference On Solid State Sensors and Actuators - Transducers 2015", IEEE, (2015), ISBN: 978-1-4799-8955-3; S. 436 - 439.

    Zusätzliche Informationen
  102. J. Toledo, T. Manzaneque, V Ruiz-Díez, M. Kucera, G. Pfusterschmied, E Wistrela, U. Schmid, J.L. Sànchez-Rojas:
    "Oscillator Circuit Based On Higher-Order Out-Of-Plane Piezoelectric Resonators For Density-Viscosity Sensing Up To 0.5 Pa·s";
    Vortrag: MME 2015 - 26th MicroMechanics Europe Workshop, Toledo, Spanien; 20.09.2015 - 23.09.2015; in: "MME 2015 - 26th MicroMechanics Europe Workshop", (2015).

    Zusätzliche Informationen
  103. J. Toledo, T. Manzaneque, V Ruiz-Díez, M. Kucera, G. Pfusterschmied, E Wistrela, U. Schmid, J.L. Sànchez-Rojas:
    "Out-of-plane Piezoelectric Microresonator and Oscillator Circuit for Monitoring Engine Oil Contamination with Diesel";
    Vortrag: Smart Sensors, Actuators and MEMS VII - 2015, Barcelona, Spain; 04.05.2015 - 06.05.2015; in: "Proc. of SPIE Vol. 9517-9520", SPIE, 9517 (2015), ISSN: 0277-786x; Paper-Nr. 95170C, 9 S.

    Zusätzliche Informationen
  104. K Thangaraj, A. Elefsiniotis, S. Aslam, Th. Becker, U. Schmid, J. Lees, C. Featherston, R. Pullin:
    "Hybrid energy storage system for wireless sensor node powered by aircraft specific thermoelectric energy harvesting";
    Vortrag: SPIE Microtechnologies 2013, Grenoble, France; 24.04.2013 - 26.04.2013; in: "Proceedings of SPIE", 8763 (2013), ISSN: 0277-786x.

    Zusätzliche Informationen
  105. E. Tempelmann, N. Adamovic:
    "Experiences from recent European research projects on the interplay between technology and design";
    Vortrag: R&D Management Conference 2015, Pisa, Italy; 23.06.2015 - 26.06.2015; in: "R&D Management Conference 2015", (2015), S. 1 - 7.

    Zusätzliche Informationen
  106. D. Tanaskovic, Z. Jaksic, J. Matovic:
    "Some design considerations of metamaterial-based chemical or biological sensors";
    Vortrag: 3rd Mediterranean Conference on Nanophotonics - MediNano-3, Belgrade, Serbia; 18.10.2010 - 19.10.2010; in: "Proc. Abstr. 3rd Mediterranean Conference on Nanophotonics MediNano-3", (2010).
  107. A Talai, R. Weigel, K. Kölpin, F. Steinhäußer, A. Bittner, U. Schmid:
    "The Influence by Trapezoidal Conductor Shapes on Ring-Resonator Based Material Characterization up to 110 GHz";
    Vortrag: IEEE Conference on Numerical Electromagnetic Modeling and Optimization for RF, Microwave and Terahertz Applications 2014, Pavia, Italien; 14.05.2014 - 16.05.2014; in: "IEEE Conference on Numerical Electromagnetic Modeling and Optimization for RF, Microwave and Terahertz Applications 2014", IEEE, (2014), ISBN: 978-1-4799-2820-0; S. 1 - 4.

    Zusätzliche Informationen
  108. A Talai, F. Steinhäußer, U. Schmid, R. Weigel, A. Bittner, A Koelpin:
    "A Finite 3D Field Simulation Method for Permittivity Gradient Implementation of Porosification Processes in LTCC";
    Vortrag: IMS 2013 - International Microwave Symposium 2013, Seattle, U.S.A.; 02.07.2013 - 07.07.2013; in: "International Microwave Symposium 2013", IEEE, (2013), ISBN: 978-1-4673-2141-9.
  109. A Talai, F. Steinhäußer, B Gmeiner, M. Wegener, A. Bittner, U. Schmid, A. Roosen, R. Weigel, K. Kölpin:
    "Electromagnetic Analysis of Conductor Track Surface Roughnesses from 1 GHz to 110 GHz";
    Vortrag: International Conference on Electromagnetics in Advanced Applications (ICEAA), Palm Beach, Aruba; 03.08.2014 - 08.08.2014; in: "Proceedings of the 2014 International Conference on Electromagnetics in Advanced Applications (ICEAA)", IEEE, (2014), ISBN: 978-1-4673-5710-4; S. 415 - 418.

    Zusätzliche Informationen
  110. A Talai, F. Steinhäußer, B Gmeiner, A. Bittner, U. Rüde, U. Schmid, R. Weigel, A Koelpin:
    "Electromagnetic Analysis of Fringed Microstrip Lines on Porosified LTCC";
    Vortrag: International Conference on Electromagnetics in Advanced Applications (ICEAA), Torino, Italy; 09.09.2013 - 13.09.2013; in: "Proceedings of the International Conference on Electromagnetics in Advanced Applications (ICEAA) 2013", IEEE, (2013), ISBN: 978-1-4673-5707-4; S. 1189 - 1192.
  111. A Talai, F. Steinhäußer, A. Bittner, U. Schmid, R. Weigel, K. Kölpin:
    "A Permittivity Characterization Method by Detuned Ring-Resonators for Bulk Materials up to 110 GHz";
    Vortrag: 44th European Microwave Conference, Rom, Italien; 06.10.2014 - 09.10.2014; in: "Proceedings of the 44th European Microwave Conference", IEEE, (2014), ISBN: 978-2-87487-035-4; S. 124 - 127.

    Zusätzliche Informationen
  112. A Talai, F. Steinhäußer, A. Bittner, U. Schmid, R. Weigel, K. Kölpin:
    "A Simplified Equivalent Model for Microwave Characteristics of Porosified LTCC";
    Vortrag: URSI General Assembly, Beijing, China; 17.08.2014 - 23.08.2014; in: "XXXI General Assembly and Scientific Symposium of the International Union of Radio Science", International Union of Radio Science, (2014), S. 1 - 4.

    Zusätzliche Informationen
  113. A Talai, S. Mann, F. Steinhäußer, U. Schmid, R. Weigel, A. Bittner, A Koelpin:
    "A Semi Double-Ridged quasi TE-Waveguide based Microwave Bulk Material Characterization System";
    Vortrag: IEEE MTT-S International Microwave Symposium 2015, Phoenix, Arizona, USA; 17.05.2015 - 22.05.2015; in: "Proceedings of the IEEE MTT-S International Microwave Symposium 2015", IEEE, (2015), ISBN: 978-1-4799-8275-2.

    Zusätzliche Informationen
  114. A Talai, B Gmeiner, F. Steinhäußer, A. Bittner, U. Rüde, U. Schmid, A Koelpin:
    "Electromagnetic Field Analysis with Advanced Structural Modeling of Microstrips on Porosified LTCC";
    Vortrag: European Microwave Week (EUMW), Nürnberg; 06.10.2013 - 11.10.2013; in: "Proceedings of the 43rd European Microwave Conference", (2013), ISBN: 978-2-87487-031-6; S. 440 - 443.

    Zusätzliche Informationen
  115. A Talai, A. Bittner, F. Steinhäußer, U. Schmid, R. Weigel, A Koelpin:
    "Poröses LTCC als Substratmaterial für Höchstfrequenzradarsensoren";
    Poster: MikroSystemTechnik Kongress 2015, Karlsruhe, D; 26.10.2015 - 28.10.2015; in: "Proceedings MikroSystemTechnik Kongress 2015", VDE Verlag GmbH, Berlin, (2015), ISBN: 978-3800741007; S. 396 - 399.

    Zusätzliche Informationen
  116. J. Takács, L. Toth, F. Franek, A. Pauschitz, T. Sebestyen et al.:
    "Investigation of Tribological Properties of Laser-Sintered and Coated Parts";
    Vortrag: 2nd World Tribology Congress, Wien; 03.09.2001 - 07.09.2001; in: "Abstracts of Papers of 2nd World Tribology Congress 2001", F. Franek, W.J. Bartz, A. Pauschitz (Hrg.); Österreichische Tribologische Gesellschaft, Abstracts of Papers (2001), ISBN: 3-901657-08-8; S. 126.

    Zusätzliche Informationen
  117. P. Szmytkiewicz, S. Golec, B. Augustyniak, H. Hauser:
    "Evaluation of anhysteretic properties of ferromagnetic materials";
    Vortrag: 12th International Symposium on Interdisciplinary Electromagnetic, Mechanic & Biomedical Problems, Bad Gastein, Austria; 12.09.2005 - 14.09.2005; in: "Short Paper Proceedings ISEM 2005", (2005), ISBN: 3-902105-00-1; S. 110 - 111.
  118. E. Suhir, G. Paul, H. Kaindl:
    "Towards Probabilistic Analysis of Human-System Integration in Automated Driving";
    Vortrag: 3rd International Conference on Human Systems Engineering and Design (IHSED2020): Future Trends and Applications, Internet; 22.09.2020 - 24.09.2020; in: "Proceedings of the International Conference on Intelligent Human Systems Integration", Springer Nature, Switzerland (2020), ISBN: 978-3-030-58281-4; S. 332 - 337.
  119. E. Suhir, J. Nicolics, G. Khatibi, M. Lederer:
    "Semiconductor Film Grown on a Circular Substrate: Predictive Modeling of Lattice-Misfit Stresses";
    Vortrag: International Conference MPPE 2015 - Materials, Processing and Product Engineering, Leoben; 03.11.2015 - 05.11.2015; in: "2016 IOP Conf. Ser.: Mater. Sci. Eng", IOP Conf. Series: Materials Science and Engineering, 119 (2016), S. 1 - 11.
  120. E. Suhir, J. Nicolics, L. Bechou:
    "Aerospace Electronic and Photonic Packaging: Predicted Thermal Stresses in Bi- and Tri-Material Assemblies";
    Vortrag: IEEE Aerospace Conference 2014, Big Sky, Montana, USA; 01.03.2014 - 08.03.2014; in: "IEEE Proceedings", (2014), Paper-Nr. 2015, 12 S.
  121. E. Suhir, J. Nicolics, L. Bechou:
    "Predicted Thermal Stresses in a Bow-Free Electronic Assembly for Automotive and Potential Aerospace Applications";
    Vortrag: IEEE Aerospace Conference 2016, Big Sky, Montana, USA; 08.03.2016 - 10.03.2016; in: "Conference Proceedings", (2016), ISBN: 978-3-8007-4171-7; 10 S.
  122. E. Suhir, J. Nicolics:
    "Aerospace electronics-and-photonics (AEP) reliability has to be quantified to be assured";
    Vortrag: 18th AIAA Non-Deterministic Approaches Conference (AIAA SciTech 2016), San Diego, CA, USA; 04.01.2016 - 08.01.2016; in: "Proceedings AIAA ScieTech 2016", (2016), S. 167901 - 167927.
  123. E. Suhir, J. Nicolics:
    "Power Core (PC) Embedding a Plurality of IC Devices and Sandwiched Between Two Dissimilar Insulated Metal Substrates (IMS'): Predicted Thermal Stresses";
    Vortrag: 17th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE 2016), Montpellier, France; 17.04.2016 - 20.04.2016; in: "Proceedings EuroSimE 2016", (2016), ISBN: 978-1-5090-2106-2; Paper-Nr. 16, 9 S.
  124. E. Suhir, R. Ghaffarian, L. Bechou, J. Nicolics:
    "Column-Grid-Array (CGA) Technology Could Lead to a Highly Reliable Package Design";
    Vortrag: IEEE Aerospace Conference 2016, Big Sky, Montana, USA; 08.03.2016 - 10.03.2016; in: "Conference Proceedings", (2016), ISBN: 978-3-8007-4171-7; Paper-Nr. 2006, 8 S.
  125. E. Suhir, A. Bensoussan, J. Nicolics:
    "Bow-Free Tri-Component Mechanically Pre-Stressed Failure-Oriented-Accelerated-Test (FOAT) Specimen";
    Vortrag: SAE Aero-Tech Conference, Seatle, Washington, USA; 22.09.2015 - 24.09.2015; in: "Proceedings", (2015), 9 S.
  126. E. Suhir, A. Bensoussan, G. Khatibi, J. Nicolics:
    "Probabilistic design for reliability in electronics and photonics: Role, significance, attributes";
    Vortrag: Reliability Physics Symposium (IRPS), 2015 IEEE International, Ca, USA; 19.04.2015 - 23.04.2015; in: "Reliability Physics Symposium (IRPS), 2015 IEEE International", IEEE, USA (2015), S. 1 - 13.
  127. E. Suhir, A. Bensoussan, G. Khatibi, J. Nicolics:
    "Probabilistic Design for Reliability in Electronics and Photonics: Role, Significance, Attributes, Challenges";
    Vortrag: IEEE International Reliability Physics Symposium (IRPS), Waikoloa, HI, USA; 01.06.2014 - 05.06.2014; in: "Proceedings of IRPS 2014", (2014), 13 S.
  128. E. Suhir, L. Bechoub, A. Bensoussan, J. Nicolics:
    "Photovoltaic Reliability Engineering: Qualification Testing and Probabilistic-Design-for-Reliability Concept";
    Poster: SPIE Optics + Photonics 2013, San Diego, California, USA (eingeladen); 25.08.2013 - 29.08.2013; in: "Proc. SPIE 8825", (2013), S. 1 - 14.
  129. E. Suhir, L. Bechou, J. Nicolics:
    "Bow-free tri-Component assembly for aerospace optoelectronics applications: Predicted thermal stresses";
    Vortrag: IEEE Aerospace Conference 2015, Big Sky, Montana, USA; 07.03.2015 - 12.03.2015; in: "Proceedings of IEEE Aerospace Conference", (2015), ISBN: 978-1-4799-5379-0; S. 1 - 10.
  130. F. Sümecz, M. Spitzbart, M. Gross:
    "Mikro-Stereolithographische Reproduktionstechnologien in der Paläontologie";
    Vortrag: 13. Jahrestagung der Österreichischen Paläontologischen Gesellschaft, Bad Mitterndorf; 31.08.2007 - 02.09.2007; in: "13. Jahrestagung der Österreichischen Paläontologischen Gesellschaft", (2007), S. 25 - 29.

    Zusätzliche Informationen
  131. G. Stojanovic, A. Maric, G. Radosavljevic, E. Laboure, W. Smetana:
    "Performance analysis of LTCC transformers for application in DC/DC converters (Awarded paper)";
    Vortrag: 14th International Power Electronics and Motion Control Conference, EPE-PEMC, Ohrid, Republic of Macedonia; 06.10.2010 - 08.10.2010; in: "Proceedings", (2010), ISBN: 978-1-4244-7854-5; S. 174 - 178.
  132. L Stöber, M. Schneider, U. Schmid:
    "Impact of Contact Material Deposition Technique on the Properties of Ti/4H-SiC Schottky Structures";
    Poster: ICSCRM 2015 - 16th International Conference on Silicon Carbide and Related Materials, Giardini Naxos, Italy; 04.10.2015 - 09.10.2015; in: "ICSCRM 2015 - 16th International Conference on Silicon Carbide and Related Materials", (2015), ISBN: 978-3-0357-1042-7; S. 569 - 572.

    Zusätzliche Informationen
  133. L Stöber, J. Konrath, M. Schneider, U. Schmid:
    "Usability of Molybdenum and Molybdenum Nitride Thin Films for Microsystem Applications";
    Vortrag: MME 2014 - 25th Micromechanics and Microsystems Europe workshop, Istanbul, Türkei; 31.08.2014 - 03.09.2014; in: "MME 2014 - 25th Micromechanics and Microsystems Europe workshop", (2014), S. 1 - 4.

    Zusätzliche Informationen
  134. L Stöber, J. Konrath, V. Haberl, M. Schneider, U. Schmid:
    "High Temperature Behaviour of Sputter Deposited Molybdenum Nitride Thin Films";
    Poster: MME 2015 - 26th MicroMechanics Europe Workshop, Toledo, Spanien; 20.09.2015 - 23.09.2015; in: "MME 2015 - 26th MicroMechanics Europe Workshop", (2015).

    Zusätzliche Informationen
  135. F. Steinhäußer, A Talai, A Koelpin, R. Weigel, A. Bittner, U. Schmid:
    "Einfluss der Materialverteilung in porosizierter LTCC auf die effektive Permittivität durch finite 3D Feld-Simulation";
    Poster: Mikrosystemtechnik Kongress 2013, Aachen, D; 14.10.2013 - 16.10.2013; in: "Proceedings MikroSystemTechnik Kongress 2013", VDE VERLAG GMBH, Berlin und Offenbach, Bismarckstraße 33, 10625 Berlin, (2013), ISBN: 978-3-8007-3555-6; S. 860 - 863.

    Zusätzliche Informationen
  136. F. Steinhäußer, G. Sandulache, W. Hansal, A. Bittner, U. Schmid:
    "Silver Metallization on Porosified LTCC Desposited by Pulse Plating Technique";
    Poster: IMAPS/ACerS 11th International CICMT Conference and Exhibition 2015, Dresden, D; 20.04.2015 - 23.04.2015; in: "Proceedings: IMAPS/ACerS 11th International CICMT Conference and Exhibition 2015", IMAPS, (2015), S. 112 - 115.

    Zusätzliche Informationen
  137. F. Steinhäußer, G. Sandulache, W. Fahrner, W. Hansal, A. Bittner, U. Schmid:
    "Thermal conductivity measurements with galvanic metallization lines on porosified LTCC applying the 3-Omega technique";
    Poster: EUROSENSORS 2014 - 28th European Conference on Solid-State Transducers, Brescia, I; 07.09.2014 - 10.09.2014; in: "Procedia Engineering", Elsevier, 87 (2014), ISSN: 1877-7058; S. 104 - 107.

    Zusätzliche Informationen
  138. R. Steindl, C. Hausleitner, H. Hauser, W. Bulst:
    "Wireless Magnetic Field Sensor employing SAW-Transponder";
    Vortrag: 12th IEEE International Symposium on the Application of Ferroelectrics, Hawaii; 05.07.2000; in: "Ferroelectrics", (2000), S. 456.
  139. A. Stehle, G. Georgiev, V. Ziegler, B. Schönlinner, U. Prechtel, U. Schmid, H. Seidel:
    "Broadband Single-Pole Multithrow RF-MEMS Switches for Ka-Band";
    Vortrag: German Microwave Conference 2009, München, D; 16.05.2009 - 18.05.2009; in: "Proceedings of the German Microwave Conference 2009", IEEE, (2009).

    Zusätzliche Informationen
  140. G. Stangl, P. Aigner, P. Hudek, I. Kostic, R. Chabicovsky, H. Hauser, J. Hochreiter, K. Riedling:
    "Cathode sputtered permalloy films of high AMR effect and low coercivity";
    Vortrag: 3rd Intern. EuroConference on Advanced Semiconductor Devices and Microsystems, Smolenice Castle, Slovakia; 16.10.2000 - 18.10.2000; in: "ASDM Proceedings", (2000), S. 151 - 155.
  141. G. Stangl, P. Aigner, H. Hauser, J. Hochreiter, K. Riedling:
    "Cathode Sputtered Permalloy Films of High AMR Effect and Low Coercivity";
    Vortrag: Workshop "Preparation, Properties, and Application of Thin Ferromagnetic Films", Wien; 15.06.2000 - 16.06.2000; in: "Proceedings of the Workshop `Preparation, Properties, and Application of Thin Ferromagnetic Films´", K. Riedling (Hrg.); Institut für Industrielle Elektronik und Materialwissenschaften, TU Wien (2000), ISBN: 3-85465-007-8; S. 57 - 61.
  142. G. Stangl, P. Aigner, H. Hauser:
    "Sputtered Permalloy Films of High Magnetoresistance";
    Poster: Soft Magnetic Materials Conference (SMM13), Grenoble, France; 24.09.1997 - 26.09.1997; in: "SMM13 - Abstracts", (1997), S. 78.
  143. H. Stahr, M. Unger, J. Nicolics, M. Morianz, S. Gross, L. Böttcher:
    "Thermal benchmark of a classic and novel embedded high-power 3-phase Inverter bridge";
    Vortrag: 6th Electronics System-Integration Technology Conference, ESTC 2016, Grenoble, France; 13.09.2016 - 16.09.2016; in: "Proceedings ESTC 2016", (2016), 6 S.
  144. H. Stahr, M. Morianz, S. Gross, M. Unger, J. Nicolics, L. Böttcher:
    "Investigation of a power module with double sided cooling using a new concept for chip embedding";
    Vortrag: 9th Int. Conf. on Integrated Power Electronics Systems, CIPS 2016, Nürnberg, Germany; 08.03.2016 - 10.03.2016; in: "Proceedings of CIPS 2016", VDE Verlag GmbH Berlin, (2016), ISBN: 978-3-8007-4171-7; 10 S.
  145. A. Stadler, J. Brenner, M. Hofer, J. Wosik, F. Franek:
    "Experimental Investigation Of The Influence Of Oil Change In A Wet Clutch System";
    Vortrag: ÖTG-Symposium 2009, Waidhofen/Ybbs, NÖ; 26.11.2009; in: "Symposium 2009 - Lebensdauer und Energieeffizienz: Herausforderungen im Maschninenbau und in der Schmierungstechnik", ÖTG, (2009), ISBN: 978-3-901657-34-4; S. 27 - 38.

    Zusätzliche Informationen
  146. G. Sordo, E. Serra, U. Schmid, J. Iannacci:
    "Optimization Method for Designing Multimodal Piezoelectric MEMS Energy Harvesters";
    Vortrag: Smart Sensors, Actuators and MEMS VII 2015, Barcelona, Spain; 04.05.2015 - 06.05.2015; in: "Proc. of SPIE Vol. 9517-9520", SPIE, 9517 (2015), ISSN: 0277-786x; Paper-Nr. 95170O, 8 S.

    Zusätzliche Informationen
  147. G. Sordo, J. Iannacci, E. Serra, M. Bonaldi, A. Borrielli, M. Schneider, U. Schmid:
    "Study on the performance of tailored spring elements for piezoelectric MEMS energy harvesters";
    Vortrag: 2015 XVIII AISEM Annual Conference, Trento, Italy; 03.02.2015 - 05.02.2015; in: "2015 XVIII AISEM Annual Conference", IEEE, (2015), ISBN: 978-1-4799-8591-3.

    Zusätzliche Informationen
  148. G. Sordo, J. Iannacci, U. Schmid:
    "Study on the Effectiveness of Different Electrode Geometries for Sputtered Aluminium Nitride-based MEMS Energy Harvesters";
    Vortrag: Symposium Design, Test, Integration & Packaging of MEMS and MOEMS (DTIP 2016), Budapest, Ungarn; 30.05.2016 - 02.06.2016; in: "Proc. of the "Symposium Design, Test, Integration & Packaging of MEMS and MOEMS (DTIP 2016)"", (2016).

    Zusätzliche Informationen
  149. C. Sommer, P.L. Fulmek, J. Nicolics, S. Schweitzer, W. Nemitz, P. Pachler, H. Hoschopf, F. Schrank, G. Langer, F. Wenzl:
    "Thermal and Optical Aspects of Glob-Top Design for Phosphor Converted White LED Light Sources";
    Poster: SPIE Optics + Photonics 2013, San Diego, USA; 25.08.2013 - 29.08.2013; in: "Proc. of SPIE Vol. 8835", (2013), S. 1 - 8.
  150. Ü. Sökmen, A. Waag, A. Ababneh, H. Seidel, U. Schmid, E. Peiner:
    "AlN Sputter-Deposited Silicon Cantilever Resonators for Mass Sensing Fabricated Using ICP-DRIE";
    Vortrag: 2. GMMWorkshop - Mikro-Nano-Integration, Erfurt, D; 03.03.2010 - 04.03.2010; in: "Abstracts", VDE Verlag, (2010), ISBN: 978-3-8007-3216-6; S. 45 - 48.

    Zusätzliche Informationen
  151. ü. Sökmen, A. Stranz, A. Waag, A. Ababneh, H. Seidel, U. Schmid, E. Peiner:
    "Realization of AlN Sputter-Deposited Silicon Cantilever Resonators for Mass Sensing";
    Vortrag: Micromechanics Europe MME 99, Toulouse, F; 20.09.2009 - 22.09.2009; in: "MME 2009", LAAS-CNS, (2009), S. 150 - 153.
  152. ü. Sökmen, E. Peiner, A. Waag, A. Ababneh, H. Seidel, U. Schmid:
    "AlN on Solicon Cantilever Resonators for Mass Sensing Fabricated Using ICP-DRIE";
    Vortrag: Smart Systems Integration 2009 (SSI), Brussels, Belgium; 10.03.2009 - 11.03.2009; in: "Smart Systems Integration 2009 Proceedings", AKA Verlag, Heidelberg, (2009), ISBN: 978-3-89838-616-6; S. 528 - 531.
  153. W. Smetana, T. Walla, M. Unger:
    "Characterization of the thermal behaviour of flexible multilayer substrates for RFID applications";
    Vortrag: International Conference of IMAPS Poland Chapter, Krakow, Polen; 24.09.2006 - 27.09.2006; in: "Proceedings of the XXX International Conference of IMAPS Poland Chapter", (2006), S. 369 - 372.
  154. W. Smetana, T. Walla:
    "A smart data logger with wireless communication interface for life science applications";
    Vortrag: European Conference & Exhibition on integration issues of miniaturized systems - MEMS, MOEMS, ICs and electronic components, Paris, Frankreich; 27.05.2007 - 28.05.2007; in: "Proceedings of SMART SYSTEMS INTEGRATION 2007", (2007), ISBN: 978-3-8007-3009-4; S. 287 - 294.
  155. W. Smetana, M. Unger, W. Gschohsmann:
    "A New Concept of a Humidity Sensor Realized in LTCC-Technology";
    Vortrag: European Microelectronics and Packaging Symposium (EMPS), Terme Catez, Slovenia; 22.05.2006 - 24.05.2006; in: "Proceedings EMPS 2006", (2006), S. 67 - 72.
  156. W. Smetana, M. Unger:
    "Set-up and characterization of a humidity sensor realized in LTCC-technology";
    Poster: Design, Test, Integration and Packaging of MEMS/MOEMS Symposium (DTIP), Stresa, Laggio Maggiore, Italy; 25.04.2007 - 27.04.2007; in: "Symposium DTIP 2007 Proceedings", (2007), ISBN: 978-2-35500-000-3; S. 67 - 72.
  157. W. Smetana, R. Reicher, M. Mündlein, J. Nicolics, H. Homolka:
    "Thick film initiator elements - an alternative to resistive wire initiators for automotive safety units";
    Vortrag: 26th International Spring Seminar on Electronics Technology, Stará Lesná, Slovak Republic; 08.05.2003 - 11.05.2003; in: "Proceedings of the ISSE 2003", (2003), ISBN: 0-7803-8002-9; S. 433 - 437.
  158. W. Smetana, R. Reicher, H. Homolka, G. Dombazian:
    "Thick Film Flow Sensors for Liquids Based on the Calorimetric Principle";
    Vortrag: International Symposium on Microelectronics (IMPAS 2004), Long Beach, CA; 14.11.2004 - 18.11.2004; in: "Proceedings IMAPS 2004", (2004), ISBN: 0-930815-74-2; 6 S.
  159. W. Smetana, R. Reicher, H. Homolka:
    "Design of thick film initiators for car safety units by means of FEM";
    Poster: 17th European Conference on Solid-State Transducers (Eurosensors XVII), Guimaraes, Portugal; 21.09.2003 - 24.09.2003; in: "Proceedings of Eurosensors XVII", (2003), ISBN: 972-98603-1-9; S. 514 - 517.
  160. W. Smetana, R. Reicher, H. Homolka:
    "Theoretical and Experimental Study of Pyrotechnical Initiator Built Up in Thick Film Technology";
    Vortrag: 11th International Conference Sensors 2003, Nuremberg, Germany; 13.05.2003 - 15.05.2003; in: "Proceedings Sensor 2003", (2003), 5 S.
  161. W. Smetana, R. Reicher, H. Homolka:
    "Thick-film Initiators for Automotive Applications";
    Vortrag: 36th International Symposium on Microelectronics, Boston, Massachusetts, USA; 18.11.2003 - 20.11.2003; in: "Proceedings IMAPS 2003", (2003), ISBN: 0-930815-71-8; S. 1 - 6.
  162. W. Smetana, G. Radosavljevic, M. Unger, L. Zivanov, T. Koch:
    "A Capacitive Temperature Sensor Concept Realized in LTCCTechnology";
    Poster: Smart Systems Integration 2009 (SSI), Brussels, Belgium; 10.03.2009 - 11.03.2009; in: "Smart Systems Integration 2009 Proceedings", (2009), ISBN: 978-3-89838-616-6; S. 1 - 4.
  163. W. Smetana, G. Radosavljevic:
    "LTCC-Technology for Microsystem Applications";
    Vortrag: 1st ReCIMiCo Workshop on Design and Characterization of Integrated Microsystems and Components, Novi Sad, Serbien; 29.09.2008 - 30.09.2008; in: "Proceedings of 1st ReCIMiCo Workshop", (2008), S. 1 - 7.
  164. W. Smetana, W. Gschohsmann:
    "Aspects of leaching and intermetallic growth by lead-free soldering";
    Vortrag: International Conference of IMAPS Poland Chapter, Krakow, Polen; 24.09.2006 - 27.09.2006; in: "Proceedings of the XXX International Conference of IMAPS Poland Chapter", (2006), S. 239 - 242.
  165. W. Smetana, W. Gschohsmann:
    "Research Activities of the "Thick-film- and Ceramic-Microstructure-Packaging laboratory" at ISAS of Vienna University of Technology";
    Vortrag: International Conference of International Microelectronics and Packaging Society Poland Chapter, Koszalin-Darlowko, Poland; 19.09.2005 - 21.09.2005; in: "Proceedings of XXIX Intern. Conference of IMAPS Poland Chapter", (2005), ISBN: 83-917701-2-5; S. 53 - 60.
  166. W. Smetana, B. Balluch, L. Musiejovsky, E. Gaubitzer, M. Edetsberger, G. Köhler:
    "Set-up of a biological monitoring module realized in LTCC technology";
    Vortrag: Photonics West, San Jose, California, USA; 20.01.2007 - 25.01.2007; in: "Proceedings of SPIE Photonics West 2007: Microfluidics, BioMEMS, and Medical Microsystems V", SPIE, Volume 6465 (2007) (2007), S. 646509-1 - 646509-10.
  167. W. Smetana, B. Balluch, L. Musiejovsky, E. Gaubitzer, M. Edetsberger, G. Köhler:
    "Set-up of a biological monitoring module realized in LTCC-technology";
    Vortrag: MNE2006 - Micro- and Nano-Engineering 2006 - 32nd International Conference, Barcelona, Spain; 17.09.2006 - 20.09.2006; in: "Book of Abstracts MNE 2006", (2006), Paper-Nr. P-MST16, 2 S.
  168. W. Smetana, B. Balluch, I. Atassi, J. Nicolics, E. Gaubitzer, G. Köhler, M. Edetsberger:
    "Herstellung eines Monitoring-Moduls für Bio-Reaktionen in LTCC-Technologie";
    Poster: Informationstagung Mikroelektronik 08 (ME2008), Wien; 15.10.2008 - 16.10.2008; in: "Tagungsband zur Informationstagung Mikroelektronik 08", (2008), ISBN: 978-3-85133-049-6; S. 78 - 81.
  169. W. Smetana, B. Balluch, I. Atassi, K. Gvichiya, E. Gaubitzer, M. Edetsberger, G. Köhler:
    "A Biological Monitoing Module Based on a Ceramic Microfluidic Platform";
    Poster: 2nd International Joint Conference on Biomedical Engineering Systems and Technologies (BIOSTEC), Porto, Portugal; 14.01.2009 - 17.01.2009; in: "Proceedings of the International Conference on Biomedical Electronics and Devices", (2009), ISBN: 978-989-8111-64-7; S. 75 - 82.

    Zusätzliche Informationen
  170. J. Silvano de Sousa, M. Unger, P.L. Fulmek, P. Haumer, J. Nicolics:
    "Embedded Mini Heat Pipes asThermal Solution for PCBs";
    Vortrag: European Microelectronics and Packaging Conference 2017 (EMPC), Warsaw, Poland; 10.09.2017 - 13.09.2017; in: "Proceedings of the European Microelectronics and Packaging Conference EMPC", (2017), 2 S.
  171. J. Silvano de Sousa, S. Liebfahrt, B. Reitmaier, M. Prutti, B. Schuscha, T. Qi, J. Nicolics, M. Unger, P.L. Fulmek:
    "Heat Capacitive PCB";
    Vortrag: 7th Electronic System-Integration Technology Conference (ESTC), Dresden, Germany; 18.09.2018 - 21.09.2018; in: "Proceedings ESTC 2018", (2018), ISBN: 978-1-5386-6814-6; 6 S.
  172. J. Silvano de Sousa, P.L. Fulmek, M. Unger, P. Haumer, J. Nicolics, M. Abo Ras, D. May:
    "Enhanced In-Plane Heat Transport in Embedded Mini Heat Pipes PCB";
    Vortrag: 50th International Symposium on Microelectronics - IMAPS 2017, Raleigh, NC USA; 09.10.2017 - 12.10.2017; in: "Proceedings IMAPS 2017", (2017), 5 S.
  173. J. Silvano de Sousa, P.L. Fulmek, M. Unger, P. Haumer, J. Nicolics:
    "Embedded Heat Pipes as Thermal Solution for PCBs";
    Vortrag: ICEP 2017, Tendo, Yamagata, Japan; 19.04.2017 - 22.04.2017; in: "Proceedings ICEP 2017", (2017), S. 394 - 398.
  174. J. Silvano de Sousa, P.L. Fulmek, M. Unger, P. Haumer, J. Nicolics:
    "Enhanced Heat Transport in Printed Circuit Boards via Passive Components Embedding";
    Vortrag: IMAPS Nordic 2017 Conf. on Microelectronics Packaging, Göteborg, Sweden; 01.05.2017 - 03.05.2017; in: "Conference Proceedings", (2017), ISBN: 978-1-5386-3054-9; 6 S.
  175. N. Severino, R. Mereu, S. Binetti, M. Acciarri, N. Bednar, N. Adamovic:
    "Numerical Modelling of Cd-free Butter Layers in CIGS Solar Cells";
    Poster: 12th International Conference on Nanosciences & Nanotechnologies - NN15, Thessaloniki, Greece; 07.07.2015 - 10.07.2015; in: "Book of Abstracts", (2015), S. 53.
  176. N. Severino, N. Bednar, R. Mereu, S. Binetti, M. Acciarri, N. Gasparotto, N. Adamovic:
    "lnfluence of Ga doping profile on electrical properties of flexible CIGS solar cell";
    Poster: 31st European Photovoltaic Solar Energy Conference and Exhibition - EU PVSEC, Hamburg, Deutschland; 14.09.2015 - 18.09.2015; in: "31st European Photovoltaic Solar Energy Conference and Exhibition - EU PVSEC", (2015), S. 1345 - 1348.

    Zusätzliche Informationen
  177. N. Severino, N. Bednar, N. Adamovic:
    "Guidelines for optimization of the performances of CIGS thin film solar cells";
    Vortrag: 3rd Euro-Mediterranean Conference on Materials and Renewable Energies - EMCMRE-3, Marrakech, Morocco; 02.11.2015 - 06.11.2015; in: "3rd Euro-Mediterranean Conference on Materials and Renewable Energies - EMCMRE-3", (2015).

    Zusätzliche Informationen
  178. N. Severino, N. Bednar, N. Adamovic:
    "Optimization Of Cigs Thin-Film Solar Cells By Numerical Modelling And Simulation";
    Vortrag: Vienna Young Scientists Symposium - VSS 2015, Vienna University of Technology; 25.06.2015 - 26.06.2015; in: "VSS - VIENNA young SCIENTISTS SYMPOSIUM, June 25-26 2015", Book-of-Abstracts.com, Heinz A. Krebs, Gumpoldskirchen, Austria (2015), ISBN: 978-3-9504017-0-7; S. 32 - 33.
  179. N. Severino, N. Bednar, N. Adamovic:
    "Simulations studies to enhance the performances of flexible CIGS solar cells";
    Poster: E-MRS Spring Meeting 2015, Lille, F; 11.05.2015 - 15.05.2015; in: "E-MRS Spring Meeting 2015", EMRS Strassburg, (2015), S. 48.

    Zusätzliche Informationen
  180. N. Severino, N. Bednar, M. Acciarri, N. Adamovic:
    "Optimization of Flexible CIGS Solar Cells/Modules";
    Poster: E-MRS Spring Meeting 2014, Lille, F; 26.05.2014 - 30.05.2014; in: "E-MRS Spring Meeting 2014", EMRS Strassburg, (2014), S. 1.
  181. N. Severino, N. Adamovic:
    "Simulation and Modeling Toolbox for the Optimized Design of Custom Solar Cells and Modules";
    Poster: 10th International Conference on Nanosciences @ Nanotechnologies (NN13), Thessaloniki, Greece; 09.07.2013 - 12.07.2013; in: "10th International Conference on Nanosciences @ Nanotechnologies (NN13) - Abstract Book", (2013).
  182. S.G. Serra, A. Schneider, K. Malecki, S.E. Huq, W. Brenner:
    "A simple bonding process of SU-8 to glass to seal a microfluidic device";
    Vortrag: 4M 2007 - Third International conference on multi-material micro manufacture, Borovets, Bulgaria (eingeladen); 03.10.2007 - 05.10.2007; in: "4M 2007 - Third international Conference on multi-material micro manufacture - Proceedings", (2007), ISBN: 978-1904445-53-1; S. 43 - 46.

    Zusätzliche Informationen
  183. T. Sebestyen, J. Takács, L. Tóth, F. Franek, A. Pauschitz:
    "Determination of Tribological Properties of Laser-Sintered Prototype Tools";
    Vortrag: 7th International Conference on Tribology, Budapest (H); 04.09.2000 - 05.09.2000; in: "Proceedings 7th International Conference on Tribology", M. Kozma (Hrg.); Budapest University of Technology and Economics, Budapest (2000), S. 315 - 317.
  184. T. Sebestyen, J. Takács, L. Tóth, F. Franek, A. Pauschitz:
    "Tribological Aspects of Wear of Laser-Sintered Rapid Prototype Tools";
    Poster: NATO-ASI-Worksh. "Fundamentals of Tribology a. Bridging the Gap Betw. the Macro- and Micro/Nano, Kesthely (H); 13.08.2000 - 25.08.2000; in: "Fundamentals of Tribology and Bridging the Gap Betw. the Macro- and Micro/Nanoscales", M. Buday (Hrg.); Logod Bt., Budapest (2000), ISBN: 9630040778; S. 81.
  185. S. Schweitzer, C. Sommer, P. Hartmann, W. Nemitz, P. Pachler, H. Hoschopf, G. Langer, P.L. Fulmek, J. Nicolics, F. Wenzl:
    "The Impact Of The Silicone Encapsulation Layers On The White Light Quality Of Phosphor Converted Leds";
    Vortrag: Twelfth International Conference on Solid State Lighting and Fourth International Conference on White LEDs and Solid State Lighting, an Diego, California, USA; 12.08.2012; in: "Proceedings of SPIE 8484", (2012), 8 S.
  186. S. Schweitzer, W. Nemitz, C. Sommer, P. Hartmann, P.L. Fulmek, J. Nicolics, P. Pachler, H. Hoschopf, F. Schrank, G. Langer, F. Wenzl:
    "The impact of individual materials parameters on color temperature reproducibility among phosphor converted LED sources";
    Vortrag: SPIE - Optics and Photonics 2014, San Diego, USA; 21.08.2014; in: "Proceedings of SPIE 2014", (2014), 1 S.
  187. B. Schweighofer, H. Wegleiter, M. Recheis, P.L. Fulmek:
    "Fast and Accurate Battery Model applicable for EV and HEV Simulation";
    Poster: IEEE International Instrumentation and Measurement Technology Conference (2012 I2MTC), Graz; 13.05.2012 - 16.05.2012; in: "Book of Abstracts", (2012), S. 1 - 2.
  188. B. Schweighofer, M. Recheis, P.L. Fulmek, H. Wegleiter:
    "Rotor Losses in a Switched Reluctance Motor - Analysis and Reduction Methods";
    Poster: Joint European Magnetic Symposia (JEMS), Parma, Italy; 09.09.2012 - 14.09.2012; in: "EPJ Web of Conferences 40, 17008 (2013)", (2012), S. 1 - 4.
  189. B. Schweighofer, M. Recheis, P.L. Fulmek, H. Wegleiter:
    "Simulation of a High Speed Reluctance Machine Including Hysteresis and Eddy Current Losses";
    Poster: The 15th International IGTE Symposium on Numerical Field Calculation in Electrical Engineering - IGTE`12, Graz, Austria; 17.09.2012 - 19.09.2012; in: "Proceedings", (2012), S. 331 - 336.
  190. E. Schwarz, G. Reinisch, A. Brandauer, S. Aharinejad, W. Scharf, K. Judmann:
    "Periprosthetic Fractures After Total Hip Arthroplasty";
    Poster: ESB2005 Sorrento - 19th European Conference on Biomaterials including the 4th Young Scientists Forum, Sorrento, Italy; 11.09.2005 - 15.09.2005; in: "ESB2005 Sorrento - 19th European Conference on Biomaterials", (2005).
  191. H. Schrottmayer, J. Nicolics:
    "A New Experimental Method for Direct Determination of the Dynamic Wetting Behavior of SMDs";
    Vortrag: International Spring Seminar on Electronics Technology (ISSE), Szklarska Poreba; 05.07.1997; in: "Proceedings of 20th Int. Spring Seminar on Electronics Technology (ISSE 97)", (1997), S. 229 - 235.

    Zusätzliche Informationen
  192. H. Schrottmayer, J. Nicolics:
    "Automatische Qualitätssicherung während des Laserlötens von Fine-Pitch-Bauelementen";
    Vortrag: Int. Hochschulkolloquium "Weichlöten in Forschung und Praxis", München; 05.06.1996; in: "DVS 182 Tagungsband des Int. Koll. Weichlöten in Forschung und Praxis", (1996), S. 96 - 108.
  193. H. Schrottmayer, L. Musiejovsky, J. Nicolics:
    "A New Method for Measuring the Dynamic Wettability under Dip and Wave Soldering Conditions";
    Vortrag: International Spring Seminar on Electronics Technology (ISSE), Neusiedl am See, Austria; 04.05.1998 - 07.05.1998; in: "Proc. of 21st International Spring Seminar on Electronics Technology (ISSE 98)", Werkstoffe der Elektrotechnik, Wien (1998), ISBN: 3-85465-004-3; S. 249.

    Zusätzliche Informationen
  194. S. Schneider, T. Waismayer, W. Gschohsmann:
    "Thermal models of a power inverter modul considering the heat transfer due to forced air cooling";
    Poster: 34th International Microelectronics and Packaging IMAPS-CPMT Poland Conference, Wroclaw; 22.09.2010 - 25.09.2010; in: "Book of Abstracts", (2010), ISBN: 978-83-917701-8-4; S. 222.
  195. M. Schneider, J. Weißenbach, U. Schmid:
    "Einfluss von Substrattemperatur und Bias-Spannung auf die Eigenschaften von gesputterten AlN Dünnfilmen für BAWs";
    Vortrag: MikroSystemTechnik Kongress 2019, München, Deutschland; 28.10.2019 - 30.10.2019; in: "MikroSystemTechnik Kongress 2017 - Proceedings", VDE Verlag GMBH, (2019), ISBN: 978-3-8007-5090-0; S. 60 - 63.

    Zusätzliche Informationen
  196. M. Schneider, L Stöber, J. Konrath, F. Patocka, U. Schmid:
    "Argon Bombardment of 4H Silicon Carbide Substrates for Tailored Schottky Diode Barrier Heights";
    Poster: 12th European Conference on Silicon Carbide and Related Materials - ECSCRM, Bimingham, UK; 02.09.2018 - 06.09.2018; in: "12th European Conference on Silicon Carbide and Related Materials - ECSCRM", (2018), S. 1 - 2.
  197. M. Schneider, U. Schmid:
    "Piezoelectric MEMS Devices: from Material Aspects to Low-Power Applications";
    Vortrag: 22nd International Conference on Advanced Materials and Simulation, Rom, Italien (eingeladen); 10.12.2018 - 12.12.2018; in: "22nd International Conference on Advanced Materials and Simulation", (2018), ISSN: 2471-9838; S. 41 - 42.

    Zusätzliche Informationen
  198. M. Schneider, U. Schmid:
    "Substrate Temperature and Bias Voltage Dependent Properties of Sputtered AlN Thin Films for BAW Applications";
    Vortrag: The 18th IEEE International Conferene on Nanotechnology (ieee nano 2018), Cork, Irland; 23.07.2018 - 26.07.2018; in: "Proceedngs of the 18th IEEE International Conferene on Nanotechnology (ieee nano 2018)", IEEE, (2018), ISBN: 978-1-5386-5336-4; S. 420 - 425.

    Zusätzliche Informationen
  199. M. Schneider, M. DeMiguel-Ramos, A. J. Flewitt, E. Iborra, U. Schmid:
    "Scandium Aluminium Nitride-Based Film Bulk Acoustic Resonators";
    Vortrag: Eurosensors 2017, Paris, Frankreich; 03.09.2017 - 06.09.2017; in: "Proceedings of Eurosensors 2017, Paris", MDPI, Vol. 1/ Iss. 4 (2017), ISSN: 2504-3900; S. 1 - 4.

    Zusätzliche Informationen
  200. M. Schneider, A. Bittner, U. Schmid, R. Beigelbeck, J. Schalko, M. Stifter:
    "Experimentelle Verifikation eines verbesserten Bulge-Test Modells zur elastomechanischen Charakterisierung von runden Aluminiumnitrid- und Siliziumnitridmembranen";
    Vortrag: Mikroelektronik Tagung ME12, Wien; 23.04.2012 - 24.04.2012; in: "ME Tagung 2012", Schriftenreihe des Öst erreichischen Verbands für Elektrotechnik, (2012), S. 56 - 60.

    Zusätzliche Informationen
  201. M. Schneider, A. Bittner, U. Schmid:
    "Improved Piezoelectric Coefficients in Ultra-thin Aluminum Nitride Thin Films";
    Vortrag: 3rd International Conference on Nanogenerators and Piezotronics (NGPT 2016), Rom, Italy; 15.06.2016 - 17.06.2016; in: "The 3rd International Conference on Nanogenerators and Piezotronics (NGPT 2016)", UniversItalia Roma, (2016), ISBN: 978-88-6507-929-4; S. 39.
  202. M. Schneider, A. Bittner, U. Schmid:
    "Investigation on the Dielectric Behavior of Aluminum Nitride Thin Films at Different Temperatures Applying a Time-zero Approach";
    Vortrag: SPIE Microtechnologies 2013, Grenoble, France; 24.04.2013 - 26.04.2013; in: "Proceedings of SPIE", 8763 (2013), ISSN: 0277-786x.

    Zusätzliche Informationen
  203. M. Schneider, A. Bittner, P Schmid, U. Schmid:
    "Impact of c-axis orientation of aluminium nitride thin films on the long-term stability and mechanical properties of resonantly excited MEMS cantilevers";
    Vortrag: EUROSENSORS 2014 - 28th European Conference on Solid-State Transducers, Brescia, I; 07.09.2014 - 10.09.2014; in: "Procedia Engineering", Elsevier, 87 (2014), ISSN: 1877-7058; S. 1493 - 1496.

    Zusätzliche Informationen
  204. A. Schneider, D. Steinmüller-Nethl, F. Franek:
    "Tribological Properties Of Nanocrystalline Diamond Surfaces";
    Vortrag: 3rd Vienna International Conference on NANO-TECHNOLOGY - VIENNANO´09, Wien; 18.03.2009 - 20.03.2009; in: "3rd Vienna International Conference on NANO-TECHNOLOGY - VIENNANO´09", Österreichische Tribologische Gesellschaft, (2009), ISBN: 978-3-901657-32-0; S. 439 - 444.

    Zusätzliche Informationen
  205. A. Schneider, J. Brenner, C. Tomastik, N. Dörr, F. Franek:
    "Capacity Of Selected Ionic Liquids As Alternative Ep-Aw Additive";
    Vortrag: ECOTRIB 2009 - 2nd European Conference on Tribology, Pisa, I; 07.06.2009 - 10.06.2009; in: "ECOTRIB '09 - 2nd European Conference on Tribology", University of Pisa, (2009), ISBN: 978-884672426-7; S. 923 - 928.

    Zusätzliche Informationen
  206. H. Schnabl, A. Pauschitz et al.:
    "3D-Modelling and Simulation of surfaces with respect to tribotechnical characterization and measurment possibilities";
    Vortrag: 2nd World Tribology Congress, Wien; 03.09.2001 - 07.09.2001; in: "Abstracts of Papers of 2nd World Tribology Congress 2001", F. Franek, W.J. Bartz, A. Pauschitz (Hrg.); Österreichische Tribologische Gesellschaft, Abstracts of Papers (2001), ISBN: 3-901657-08-8; S. 858.

    Zusätzliche Informationen
  207. U. Schmid, M. Schneider:
    "Advanced Aluminium Nitride Thin Films for Piezoelectric MEMS";
    Hauptvortrag: Surfcoat Korea 2019, Incheon, Korea (eingeladen); 27.03.2019 - 29.03.2019; in: "Surfcoat Korea 2019 - Book of Abstracts", (2019), S. 31.

    Zusätzliche Informationen
  208. U. Schmid, M. Schneider:
    "Aluminium Nitride based Piezoelectric MEMS: From Material Aspects to Low Power Devices";
    Vortrag: 46th International Conference on Metallurgical Coatings and Thin Films, San Diego, USA (eingeladen); 19.05.2019 - 24.05.2019; in: "46th International Conference on Metallurgical Coatings and Thin Films", (2019), S. 1.

    Zusätzliche Informationen
  209. U. Schmid, M. Schneider:
    "High Performance Piezoelectric AlN MEMS Resonators for Liquid Sensing and Beyond - The Potential of PiezoMEMS";
    Vortrag: 20th International Conference on Solid State Sensors, Actuators and Microsystems & Eurosensors XXXIII (Transducers & Eurosensors XXXIII), Berlin, D (eingeladen); 23.06.2019 - 27.06.2019; in: "20th International Conference on Solid State Sensors and Actuators (Transducers 19)", IEEE, CFP19SSA-ART (2019), ISBN: 978-1-5386-8104-6; S. 653 - 654.

    Zusätzliche Informationen
  210. U. Schmid, M. Schneider:
    "Piezoelectric MEMS: Materials, Devices and Applications";
    Vortrag: 16th International Conference on Plasma Surface Engineering (PSE 2018), Garmisch-Partenkirchen, Deutschland (eingeladen); 17.09.2018 - 21.09.2018; in: "16th International Conference on Plasma Surface Engineering (PSE 2018)", (2018), S. 1.

    Zusätzliche Informationen
  211. U. Schmid, A. Hajian, A. Bittner:
    "Wet chemical Etching as an Effective Technique for the Local Permittivity Reduction of LTCC Substrates";
    Vortrag: 15th International Conference and Exhibition on Ceramic Interconnect and Ceramic Microsystems Technologies (CICMT 2019), Shanghai, China (eingeladen); 16.04.2019 - 19.04.2019; in: "15th International Conference and Exhibition on Ceramic Interconnect and Ceramic Microsystems Technologies (CICMT 2019)", IMAPS, (2019), S. 1.

    Zusätzliche Informationen
  212. U. Schmid, A. Bittner:
    "LTCC as Advanced Substrate Material for Miniaturized Devices and Systems";
    Vortrag: 35th International Conference of IMAPS - CPMT IEEE Poland, Gdansk-Sobieszewo, Poland (eingeladen); 21.09.2011 - 24.09.2011; in: "Conference Proceedings", (2011), ISBN: 978-83-932464-0-3; S. 55 - 58.

    Zusätzliche Informationen
  213. P Schmid, C Zarfl, G Balogh, U. Schmid:
    "Gauge Factor of Titanium/Platinum Thin Films up to 350°C";
    Poster: EUROSENSORS 2014 - 28th European Conference on Solid-State Transducers, Brescia, I; 07.09.2014 - 10.09.2014; in: "Procedia Engineering", Elsevier, 87 (2014), ISSN: 1877-7058; S. 172 - 175.

    Zusätzliche Informationen
  214. M. Schlögl, M. Schneider, U. Schmid:
    "Design and Simulation of a Scalable Hybrid Energy Harvesting Device for Low Frequency Rotations";
    Vortrag: MME 2019 - 30th Micromechanics and Microsystems Europe workshop, Oxford; 18.08.2019 - 20.08.2019; in: "MME 2019 - 30th Micromechanics and Microsystems Europe workshop", (2019), S. 1 - 4.

    Zusätzliche Informationen
  215. M. Schlögl, M. Schneider, U. Schmid:
    "Design and Simulation of a Scalable Hybrid Energy Harvesting Device for Low Frequency Rotations";
    Vortrag: 30th Micromechanics and Microsystems Europe Workshop (MME) 2019, Wolfson College, Oxford, United Kingdom; 18.08.2019 - 20.08.2019; in: "Journal of Physics: Conference Series", Journal of Physics: Conference Series, 1837 (2021), ISSN: 1742-6596; S. 1 - 4.

    Zusätzliche Informationen
  216. J.L. Sànchez-Rojas, J. Hernando-Garcia, A. Donoso, J. Bellido, L. Gutiérrez, A. Ababneh, H. Seidel, U. Schmid:
    "Piezoelectric Modal Sensors/actuators Based On Microplates Applying Surface Electrode Patterning";
    Vortrag: 15th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS 09), Denver, CO, USA; 21.06.2009 - 25.06.2009; in: "Proceedings of the 15th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS 09)", IEEE, (2009), ISBN: 978-1-4244-4193-8; S. 2346 - 2349.

    Zusätzliche Informationen
  217. D. Samson, M. Kluge, Th. Becker, U. Schmid:
    "Optimization of a Heat Storage Device for an Aircraft Specific Thermoelectric Power Generator";
    Vortrag: 8th European Conference on Thermoelectrics (ECT 2010), Como, I; 22.09.2010 - 24.09.2010; in: "Proceedings", (2010).

    Zusätzliche Informationen
  218. D. Samson, M. Kluge, Th. Becker, T. Otterpohl, U. Schmid:
    "Energieautonomer Funknetzwerkknoten für Luftfahrzeuge";
    Vortrag: Informationstagung Mikroelektronik ME10, Wien; 07.04.2010 - 08.04.2010; in: "Proceedings of the ME 2010", (2010), ISBN: 978-3-85133-055-7.

    Zusätzliche Informationen
  219. D. Samson, Th. Becker, U. Schmid:
    "Thermoelectric Energy Harvesting in Aircraft for Wireless Sensors";
    Vortrag: ARGE Sensorik PhD-Summit 2011, Linz, Austria; 29.06.2011 - 30.06.2011; in: "Proceedings of the ARGE Sensorik PhD-Summit 2011", (2011), ISBN: 978-3-9502856-1-1; S. 29 - 37.
  220. V Ruiz-Díez, J. Toledo, T. Manzaneque, J. Hernando-Garcia, M. Kucera, U. Schmid, J.L. Sànchez-Rojas:
    "Modelling And Characterization Of The Roof Tile-Shaped Modes Of Aln-Based Cantilever Resonators In Liquid Media";
    Vortrag: MME 2015 - 26th MicroMechanics Europe Workshop, Toledo, Spanien; 20.09.2015 - 23.09.2015; in: "MME 2015 - 26th MicroMechanics Europe Workshop", (2015).

    Zusätzliche Informationen
  221. V Ruiz-Díez, J. Toledo, J. Hernando-Garcia, G. Pfusterschmied, U. Schmid:
    "Fluid-structure interaction modelling of the roof tile-shaped modes in piezoelectric plate microresonators";
    Vortrag: SPIE Microtechnologies 2017, Barcelnoa, Spanien; 08.05.2017 - 10.05.2017; in: "Proc. SPIE 10246, Smart Sensors, Actuators, and MEMS VIII", SPIE, (2017), ISSN: 1996-756x; Paper-Nr. 1024604, 9 S.

    Zusätzliche Informationen
  222. V Ruiz-Díez, T. Manzaneque, J. Hernando-Garcia, A. Ababneh, M. Kucera, A. Al-Omari, A. Bittner, U. Schmid, H. Seidel, J.L. Sànchez-Rojas:
    "Contour And Flexure-Actuated In-Plane Modes Of Aln-Based Piezoelectric Vibrating Mems";
    Poster: SPIE Microtechnologies 2013, Grenoble, France; 24.04.2013 - 26.04.2013; in: "Proceedings of SPIE", 8763 (2013), ISSN: 0277-786x.

    Zusätzliche Informationen
  223. V Ruiz-Díez, J. Hernando-Garcia, M. Kucera, A. Ababneh, U. Schmid, H. Seidel, J.L. Sànchez-Rojas:
    "Modelling Of Out-Of-Plane And In-Plane Modes Of Microplates In Liquid Media";
    Vortrag: MME 2014 - 25th Micromechanics and Microsystems Europe workshop, Istanbul, Türkei; 31.08.2014 - 03.09.2014; in: "MME 2014 - 25th Micromechanics and Microsystems Europe workshop", (2014), S. 1 - 4.

    Zusätzliche Informationen
  224. D. Ruiz, A. Donoso, J. Bellido, M. Kucera, U. Schmid, J.L. Sànchez-Rojas:
    "Optimal Design of Piezoelectric Microtransducers for Static Response";
    Vortrag: Smart Sensors, Actuators and MEMS VII 2015, Barcelona, Spain; 04.05.2015 - 06.05.2015; in: "Proc. of SPIE Vol. 9517-9520", SPIE, 9517 (2015), ISSN: 0277-786x; Paper-Nr. 95171Y, 10 S.

    Zusätzliche Informationen
  225. M. Roy, A. Pauschitz, R. Polak, F. Franek:
    "High temperature wear of thermal sprayed CR3C2-25(Ni-20Cr) coating against Fe based and Ni based mating surfaces";
    Vortrag: 16th International Colloquium Tribology, Ostfildern, Deutschland; 15.01.2008 - 17.01.2008; in: "Proceedings", TAE, (2008), ISBN: 3-924813-73-6; S. 8.

    Zusätzliche Informationen
  226. M. Roy, A. Pauschitz, F. Franek:
    "Elevated Temperature Wear of 253 MA Alloy";
    Vortrag: 3rd Aimeta International Tribology Conference, Salerno, Italy; 18.09.2002 - 20.09.2002; in: "Abstracts of Papers from 3rd Aimeta International Tribology Conference", V. d´ Agostino, S. Della Valle (Hrg.); (2002), S. 5.

    Zusätzliche Informationen
  227. M. Roy, A. Pauschitz, F. Franek:
    "Influence of Counter Material on Elevated Temperature Wear of Thermal Sprayed Nanocrystalline Cr3C2-25(Ni20Cr)-Coating";
    Vortrag: ÖTG-Symposium 2002, Wiener Neustadt; 29.11.2002; in: "Industrielle Tribologie", F. Franek, A. Pauschitz (Hrg.); Österreichische Tribologische Gesellschaft, Wien (2002), ISBN: 3-901657-11-8; S. 133 - 143.
  228. M. Roy, A. Pauschitz, F. Franek:
    "Sliding wear behaviour of nano-crystalline Cr3C2-25 (Ni20Cr) coating at elevated temperature";
    Vortrag: 29th Leeds-Lyon Symposium on Tribology, Leeds; 03.09.2002 - 06.09.2002; in: "Tribological Research and Design for Engineering Systems", (2002), S. 19.
  229. M. Roy, A. Pauschitz, F. Franek:
    "Wear Oxidation Interaction for CR3C2-25(NI20CR) Coating";
    Vortrag: 15th International Corrosion Congress, Granada, Spanien; 22.09.2002 - 27.09.2002; in: "Frontiers in Corrosion Science and Technology", (2002), S. 209.
  230. M. Roy, A. Pauschitz:
    "Microstructure and Mechanical Properties of HVOF Sprayed Nano-Crystalline NiCr-Cr3C2Coating";
    Vortrag: Eighth International Conference on Plasma Surface Engineering, Garmisch-Partenkirchen; 09.09.2002 - 13.09.2002; in: "Eighth International Conference on Plasma Surface Engineering", VDI-Technologiezentrum, Düsseldorf, Deutschland (2002), S. 449.
  231. M. Roy, S. Kvasnica, C. Eisenmenger-Stittner, G. Vorlaufer, A. Pauschitz:
    "PVD-18: An Analysis of Nanotribological Study of Ti-Containing Hard Carbon Film";
    Vortrag: International Convention on Surface Engineering, INCOSURF 2004, Bangalore, India; 25.08.2004 - 27.08.2004; in: "Proceedings INCOSURF 2004", (2004), S. 441 - 450.
  232. M. Rodríguez Ripoll, B. Scheichl, B. Jakab, F. Franek:
    "Modelling the doctor blade - roller tribosystem for improving the cleaning performance during paper production";
    Vortrag: 15th Nordic Symposium on Tribology (NORDTRIB 2012), Trondheim, Norway; 12.06.2012 - 15.06.2012; in: "Proc. NORDTRIB 2012", (2012), Paper-Nr. 107, 6 S.

    Zusätzliche Informationen
  233. M. Rodríguez Ripoll, B. Scheichl, B. Jakab, F. Franek:
    "Optimization of the Cleaning Performance of the Doctor Blade - Roller Tribosystem During Paper Production";
    Vortrag: 2012 STLE 67th Annual Meeting & Exhibition, St. Louis, MO, USA; 06.05.2012 - 10.05.2012; in: "Conference Proceedings - 2012 STLE Annual Meeting & Exhibition", Society of Tribologists & Lubrication Engineers (STLE), (2012), Paper-Nr. (ID) 1258481, Track / Category "Practical Lubrication Practices", 3 S.

    Zusätzliche Informationen
  234. M. Rodríguez Ripoll, B. Scheichl, D. Bianchi, B. Jakab, F. Franek:
    "Development and experimental verification of a numerical model for optimizing the cleaning performance of the doctor blade - roll tribosystem";
    Vortrag: 3rd International Conference on Tribology of IFToMM, Luleå University of Technology, Sweden; 19.03.2013 - 21.03.2013; in: "Proceedings of 3rd International Conference on Tribology of IFToMM", (2013).

    Zusätzliche Informationen
  235. P. Ripka, M. Vopálenský, A. Platil, M. Döscher, K. Lenssen, H. Hauser:
    "AMR Magnetometer";
    Poster: Soft Magnetic Materials Conference (SMM15), Bilbao, Spanien; 05.09.2001 - 07.09.2001; in: "SMM15 Abstracts", (2001), S. 18.
  236. K. Riedling, J. Smejkal, J. Nicolics, E. Riedling:
    "Remote Laboratory Classes on Components' Reliability";
    Vortrag: 5th Intern. Academic Conference on Electronic Packaging, Education and Training, Dresden, Germany; 20.03.2002 - 21.03.2002; in: "Proceedings of the 5th Int. Academic Conference on Electronic Packaging Education and Training", R. Tummala, K.-J. Wolter, T. Zerna (Hrg.); Verlag Dr. Markus A. Detert, Templin/Uckermark (2002), ISBN: 3-934142-07-9; S. 123 - 130.

    Zusätzliche Informationen
  237. W. Rieder, A. Kaindl, K. Loibner, R. Reicher, W. Smetana:
    "Entwicklung eines EMV-Regelbuches und dessen Implementierung in ein CAD-Adviser System";
    Vortrag: 10. Intern. Fachmesse und Kongress für Elektromagnetische Verträglichkeit, Düsseldorf, D (eingeladen); 09.04.2002 - 11.04.2002; in: "Elektromagnetische Verträglichkeit", (2002), S. 251 - 258.
  238. W. Rieder, H. Homolka, H. Hauser, J. Nicolics:
    "Packaging Concepts of Electronic Heater Ignition Circuits for Switch Machines";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Balatonfüred, Hungary; 06.05.2000 - 10.05.2000; in: "ISSE 2000 Abstracts, S. O98", ISSE 2000 Proceedings, (2000), ISBN: 963-420-639-5; S. 442 - 444.
  239. M. Rennhofer, A. Schneider, N. Bednar, P. Sevela, P. Corti, N. Adamovic, A. Zimmermann:
    "SynerCIS - Neue Formmöglichkeiten in der BIPV";
    Vortrag: 9. Forum Bauwerkintegrierte Photovoltaik, Bad Staffelstein, Deutschland; 07.03.2017; in: "9. Forum Bauwerkintegrierte Photovoltaik", (2017), S. 1 - 7.

    Zusätzliche Informationen
  240. J. Reitterer, M. Rupp:
    "Interference Alignment In Umts Long Term Evolution";
    Vortrag: European Signal Processing Conference 2011, Spain; 29.08.2011 - 02.09.2011; in: "Proc. European Signal Processing Conference 2011", (2011), ISSN: 2076-1465; S. 1094 - 1098.

    Zusätzliche Informationen
  241. J. Reitterer, F. Fidler, G. Schmid, T. Riel, C. Hambeck, F.S. Julien-Wallsee, W. Leeb, U. Schmid:
    "Laser light module with integrated MEMS mirror for autostereoscopic outdoor displays";
    Vortrag: EUROSENSORS 2014 - 28th European Conference on Solid-State Transducers, Brescia, I; 07.09.2014 - 10.09.2014; in: "Procedia Engineering", Elsevier, 87 (2014), ISSN: 1877-7058; S. 1541 - 1544.

    Zusätzliche Informationen
  242. J. Reitterer, F. Fidler, G. Schmid, C. Hambeck, F. Saint Julien-Wallsee, W. Leeb, U. Schmid:
    "3D Billboards without Glasses";
    Vortrag: IDW/AD'16 - The 23rd International Display Workshops in conjunction with Asia Display 2016, Fukuoka, Japan (eingeladen); 07.12.2016 - 09.12.2016; in: "Proceedings of the 23rd International Display Workshops in conjunction with Asia Display 2016", (2016), S. 61.

    Zusätzliche Informationen
  243. J. Reitterer, F. Fidler, G. Schmid, C. Hambeck, F. Saint Julien-Wallsee, W. Leeb, U. Schmid:
    "Calibration Method for Synchronizing the Viewing Zones of a Large-scale Autostereoscopic Multi-view Laser Display";
    Vortrag: Integrated Photonics: Materials, Devices, and Applications III - 2015, Barcelona, Spain; 04.05.2015 - 06.05.2015; in: "Proc. of SPIE Vol. 9517-9520", SPIE, 9520 (2015), ISSN: 0277-786x; Paper-Nr. 952007, 6 S.

    Zusätzliche Informationen
  244. J. Reitterer, F. Fidler, G. Schmid, C. Hambeck, F. Saint Julien-Wallsee, W. Leeb, U. Schmid:
    "Input-shaped actuation of electromagnetic MEMS mirrors";
    Vortrag: Smart Sensors, Actuators and MEMS VII - 2015, Barcelona, Spain; 04.05.2015 - 06.05.2015; in: "Proc. of SPIE Vol. 9517-9520", SPIE, 9517 (2015), ISSN: 0277-786x; Paper-Nr. 95170J, 7 S.

    Zusätzliche Informationen
  245. J. Reitterer, F. Fidler, G. Schmid, C. Hambeck, F. Saint Julien-Wallsee, W. Leeb, U. Schmid:
    "Software Beam Combiner for Ultra-compact RGB Laser Light Modules with MEMS Mirrors";
    Vortrag: Applied Industrial Optics Conference 2016, Heidelberg, D (eingeladen); 25.07.2016 - 28.07.2016; in: "Proceedings Applied Industrial Optics Conference 2016", (2016), S. AIW3B.3.pdf.
  246. J. Reitterer, F. Fidler, G. Schmid, C. Hambeck, F.S. Julien-Wallsee, W. Leeb, U. Schmid:
    "The billboard of the future: A large-scale glasses-free 3D display";
    Vortrag: The 15th International Meeting on Information Display, Daegu, Korea (eingeladen); 18.08.2015 - 21.08.2015; in: "Proceedings of the 15th International Meeting on Information Display", (2015), S. 545.
  247. J. Reitterer, F. Fidler, G. Schmid, C. Hambeck:
    "3D laser display";
    Vortrag: Vienna Young Scientists Symposium - VSS 2015, Vienna University of Technology; 25.06.2015 - 26.06.2015; in: "VSS - VIENNA young SCIENTISTS SYMPOSIUM, June 25-26 2015", Book-of-Abstracts.com, Heinz A. Krebs, Gumpoldskirchen, Austria (2015), ISBN: 978-3-9504017-0-7; S. 60 - 61.
  248. J. Reitterer, F. Fidler, F. Saint Julien-Wallsee, G. Schmid, W. Gartner, W. Leeb, U. Schmid:
    "Large-scale autostereoscopic outdoor display";
    Vortrag: SPIE-IS&T Electronic Imaging, Burlingame, California, USA; 04.02.2013 - 06.02.2013; in: "Proc. SPIE 8648, Stereoscopic Displays and Applications XXIV", Vol. 8648, 86480G (2013), S. 1 - 9.

    Zusätzliche Informationen
  249. J. Reitterer, F. Fidler, F.S. Julien-Wallsee, M. Barth, W. Eberhardt, U Keßler, H. Kück, U. Schmid:
    "Analysis of thermal vias in molded interconnect devices";
    Vortrag: SPIE Microtechnologies 2013, Grenoble, France; 24.04.2013 - 26.04.2013; in: "Proceedings of SPIE Vol. 8763", 8763 (2013), ISSN: 0277-786x.

    Zusätzliche Informationen
  250. J. Reitterer, F. Fidler, C. Hambeck, F. Saint Julien-Wallsee, S. Najda, P. Perlin, S. Stanczyk, R. Czernecki, S. McDougall, W. Meredith, G. Vickers, K. Landles, U. Schmid:
    "Integrated RGB laser light module for autostereoscopic outdoor displays";
    Vortrag: SPIE: Components and Packaging for Laser Systems - 2015, San Francisco, California, United States; 09.02.2015 - 12.02.2015; in: "Proc. of SPIE: Components and Packaging for Laser Systems - 2015", SPIE, 9346 (2015), ISSN: 0277-786x; Paper-Nr. 934619, 8 S.

    Zusätzliche Informationen
  251. J. Reitterer:
    "Ultra-compact RGB laser light module with MEMS mirror for visual display and projection applications";
    Vortrag: Laser Display and Lighting Conference 2016, Jena, D (eingeladen); 04.07.2016 - 08.07.2016; in: "Laser Display and Lighting Conference 2016", (2016).
  252. G. Reinisch, E. Schwarz, A. Brandauer, S. Aharinejad, W. Scharf, K. Judmann:
    "Load Transfer and Femoral Fractures - an In-Vitro Study";
    Poster: ESB2005 Sorrento - 19th European Conference on Biomaterials including the 4th Young Scientists Forum, Sorrento, Italy; 11.09.2005 - 15.09.2005; in: "ESB2005 Sorrento - 19th European Conference on Biomaterials", (2005).
  253. G. Reinisch, N. Pfeifer, K. Judmann, J. Schörg:
    "Wear Measurment of Hard/Hard Pairings in Total Hip Replacement using the Dimensional Method";
    Vortrag: 4th Combined Meeting, Rodes, Greece; 01.06.2001 - 03.06.2001; in: "Orthopaedic Research Societies of the USA, Canada, Europe and Japan", (2001), S. 126.
  254. G. Reinisch, K. Judmann, C. Lhotka, K. Zweymüller:
    "Tribologische Untersuchungen an 18 früh-gelockerten Metall-Metall-Hüftendoprothesen";
    Vortrag: Jahrestagung der Österreichischen Gesellschaft für Orthopädie und Orthopädische Chirurgie, Salzburg; 29.11.2001 - 01.12.2001; in: "26. ÖGO-Jahrestagung", (2001), S. 168.
  255. G. Reinisch, K. Judmann, F. Bauer, A. Pauschitz:
    "Comparison of bi-axial and three-axial movement in hip simulator testing";
    Vortrag: EMBEC 1999 European Medical and Biological Engineering Conference, Vienna, Austria; 04.11.1999 - 07.11.1999; in: "Proceedings of the EMBEC `99", (1999), S. 226 - 227.
  256. R. Reicher, W. Smetana, J. Schuster, A. Adlaßnig:
    "A TiCuAg Thick Film Composition for the Metallization of Aluminium Nitride Ceramic";
    Poster: XXII IMAPS-Poland Conference, Zakopane, Poland; 01.10.1998 - 03.10.1998; in: "Proceedings XXII. IMAPS-Poland Conference", (1998), S. 299 - 302.

    Zusätzliche Informationen
  257. R. Reicher, W. Smetana, J. Schuster, A. Adlaßnig:
    "An Innovative Thick Film Metallization for Power Electronic Devices";
    Vortrag: 32nd Int. Symposium on Microelectronics (IMAPS 99), Chicago, USA; 26.10.1999 - 28.10.1999; in: "Proceedings of IMAPS 1999", (1999), S. 728 - 733.

    Zusätzliche Informationen
  258. R. Reicher, W. Smetana, A. Adlaßnig, J. Schuster:
    "A Study of the Solderability of AgCuTi-metallizations Applied on AlN-ceramic";
    Vortrag: 4th R.O.C./Austria Workshop on Ceramic and Metal Structural Composites, Taiwan; 26.03.1999 - 27.03.1999; in: "Proceedings of the 4th R.O.C.", (1999), S. 285 - 297.
  259. R. Reicher, W. Smetana, A. Adlaßnig, J. Schuster:
    "Characterization of a Glass Frit Free TiCuAg-Thick-Film-Metallization Applied on Aluminium Nitride";
    Vortrag: 3rd Workshop on Metal-Ceramic Composite Structures, Wien; 05.05.1997; in: "Proceeding of the 3rd Workshop on Metal-Ceramic Composite Structures", (1997), S. 1.
  260. F. Reichel, T. Schrefl, D. Süss, G. Hrkac, D. Praetorius, M. Gusenbauer, S. Bance, H. Oezelt, J. Fischbacher, L. Exl:
    "Mechanical Oscillations of Magnetic Strips under the Influence of External Field";
    Vortrag: JEMS 2012 - Joint European Magnetism Symposia, Parma, Italien; 09.09.2012 - 14.09.2012; in: "JEMS 2012 - Joint European Magnetic Symposia", EPJ Web of Conferences, 40 (2013), S. 13004.

    Zusätzliche Informationen
  261. M. Recheis, H. Wegleiter, B. Schweighofer, P.L. Fulmek:
    "Evaluation of inductive displacement sensor configurations for a flywheel energy storage system";
    Poster: SMM20, 20th International Conference on Soft Magnetic Materials, Kos Island, Greece; 18.09.2011 - 22.09.2011; in: "Book of Abstracts", (2011), ISBN: 978-960-9534-14-7; S. 500.
  262. M. Recheis, H. Wegleiter, B. Schweighofer, P.L. Fulmek:
    "Impedance measurements of ferrite core displacement sensors for flywheel energystorage systems";
    Poster: IEEE International Instrumentation and Measurement Technology Conference (2012 I2MTC), Graz; 13.05.2012 - 16.05.2012; in: "Book of Abstracts", (2012), ISBN: 978-1-4577-1772-7; S. 1 - 5.
  263. M. Recheis, B. Schweighofer, P.L. Fulmek, H. Wegleiter:
    "Optimization of active magnetic bearings for automotive flywheel energy storage systems based on soft magnetic materials";
    Poster: Joint European Magnetic Symposia (JEMS), Parma, Italy; 09.09.2012 - 14.09.2012; in: "EPJ Web of Conferences 40, 17009 (2013)", (2012), S. 1 - 4.
  264. M. Recheis, J. Nicolics, H. Wegleiter, B. Schweighofer, P.L. Fulmek:
    "Evaluation of Inductive Displacement Sensors for a Basic Active Magnetic Bearing Test Rig";
    Poster: ISSE 2011, Tatranska Lomnica, Slovakia; 11.05.2011 - 13.05.2011; in: "Proceedings of the 34th International Spring Seminar on Electronics Technology", IEEE Xplore, (2011), ISBN: 978-1-4577-2112-0; S. 626 - 631.
  265. G. Randolf, H. Hauser:
    "Dielectric Energy Storage by Prepolarized BaTiO3 Particles";
    Vortrag: Int. Conference on Dielectric and Insulating Systems in Electrical Engineering (DISEE 98), Bratislava, Slovakia; 20.01.1998 - 22.01.1998; in: "Proc. of DISEE 98", (1998), ISBN: 80-227-1017-2; S. 123 - 126.
  266. G. Randolf, H. Frais-Kölbl, H. Hauser:
    "Method for Prepolarizing Ferroelectric Particles";
    Poster: 8th Int. Symposium on Non-Linear Electromagnetic Systems (ISEM), Braunschweig, Germany; 12.05.1997 - 14.05.1997; in: "Nonlinear Electromagnetic Systems; Studies in Applied Electromagnetics and Mechanics", V. Kose, J. Sievert (Hrg.); IOS Press, Amsterdam, 13 (1998), ISBN: 90-5199-381-1; S. 892 - 895.
  267. G. Randolf, H. Frais-Kölbl, H. Hauser:
    "Dielectric Energy Storage by Ferroelectric Particles";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Szklarska Poreba; 08.06.1997 - 11.06.1997; in: "Proc. of ISSE 97", (1997), S. 219 - 223.
  268. G. Randolf, H. Frais-Kölbl, H. Hauser:
    "Dielectric Energy Storage by Prepolarized, Polymer Embedded Ferroelectric Particles";
    Poster: Conference on Electrical Insulation and Dielectric Phenomena (CEIDP 96), San Francisco, USA; 20.10.1996 - 23.10.1996; in: "Proc. of CEIDP 96", IEEE Catalog, 96CH35985 (1996), ISBN: 0-7803-3580-5; S. 220 - 223.
  269. Ph Radovanovic, M. Kellner, J. Matovic, R. Liska:
    "Asymmetric Sol-gel Proton-conducting Membrane";
    Poster: 4M 2011 - 8th International Conference on Multi-Material Micro Manufacture, Stuttgart, D; 08.11.2011 - 10.11.2011; in: "4M 2011 - Proceedings of the 8th International Conference on Multi-Material Micro Manufacture", Research Publishing, (2011), ISBN: 978-981-07-0319-6; S. 230 - 233.

    Zusätzliche Informationen
  270. P. Radovanovic, M. Kellner, J. Matovic, R. Liska:
    "Asymmetric proton-conducting membrane made by photopolymerization";
    Poster: RadTech Europe 2011, Basel, CH; 18.10.2011 - 20.10.2011; in: "RadTech Europe 2011 - Abstract Book", (2011), S. 129.
  271. P. Radovanovic, M. Kellner, J. Matovic, R. Liska:
    "Novel asymmetric interpenetrating proton-conducting membrane";
    Poster: ICOM 2011 - International Congress on Membranes and Membrane Processes, Amsterdam, Niederlande; 23.07.2011 - 29.07.2011; in: "ICOM 2011", (2011), S. 642.
  272. C. Radot, L. Federzoni, W. Palitzsch, A. Ulyashin, N. Adamovic:
    "Turning Waste into Sustainable Photovoltaics - Status of the NewWaste2PV EU FP7 Project";
    Vortrag: Eu Pvsec 2013, Paris, F; 30.09.2013 - 04.10.2013; in: "EU PVSEC 2013 - Conference Procedings", (2013).
  273. G. Radosavljevic, L. Zivanov, L. Nad, A. Maric, W. Smetana, M. Unger:
    "Resonant pressure sensor designed for the LTCC-technology";
    Poster: ETRAN 2008, Palic, Serbia; 08.06.2008 - 12.06.2008; in: "Proceedings of 52nd ETRAN Conference", (2008), S. MO1.5-1 - MO1.5-4.
  274. G. Radosavljevic, L. Zivanov, A. Maric, G. Stojanovic, W. Smetana, M. Unger:
    "Mikro senzor sile namenjen za rad u ekstremnim uslovima okruzenja (in Serbian)";
    Vortrag: VII Simpozijum industrijska elektronika INDEL 2008, Banja Luka, Bosnia and Hercegovina; 06.11.2008 - 08.11.2008; in: "Conference Proceedings", (2008), S. 1 - 4.
  275. G. Radosavljevic, L. Zivanov, A. Maric, L. Nad, W. Smetana, M. Unger:
    "Performance Improvement of a Resonant Pressure Sensor by Means of Model Based Design Optimisation";
    Poster: IEEE SENSORS 2008 Conference, LECCE, Italien; 25.10.2008 - 29.10.2008; in: "Proceedings of the 7th Conference on Sensors IEEE Sensors 2008", (2008), S. 1008 - 1011.
  276. G. Radosavljevic, W. Smetana, A. Maric, L. Zivanov, M. Unger, G. Stojanovic:
    "LTCC micro force sensor";
    Vortrag: Second ReClMiCo Workshop: New Trends in Integrated Microsystems and Components, Novi Sad, Serbia; 05.03.2010 - 06.03.2010; in: "Proceedings", University of Novs Sad, Faculty of Technical Science, (2010), ISBN: 978-86-7892-287-9; S. 67 - 73.
  277. G. Radosavljevic, W. Smetana, A. Maric, L. Zivanov, M. Unger, G. Stojanovic:
    "Micro force sensor fabricated in the LTCC technology";
    Poster: 27th International Conference on Microelectronics (MIEL 2010), Nis, Serbia; 16.05.2010 - 19.05.2010; in: "Conference Proceedings", (2010), ISBN: 978-1-4244-7200-0; S. 221 - 224.
  278. G. Radosavljevic, W. Smetana, A. Maric, L. Zivanov, M. Unger, G. Stangl, G. Stojanovic:
    "A Sensitivity Improvement of a Non Contact LTCC Resonant Pres¬sure Sensor";
    Poster: XXXIII International Conference of IMAPS Poland Chapter, Gliwice-Pszczyna, Poland; 21.09.2009 - 24.09.2009; in: "Proceedings of the XXXIII International Conference of IMAPS Poland Chapter", (2009), ISBN: 978-83-917701-7-7; S. 304 - 308.
  279. G. Radosavljevic, A. Maric, L. Zivanov, S. Toskov, W. Smetana:
    "Resonant Sensors for Wireless Pressure Monitoring Realized in LTCC-Technology";
    Vortrag: 35th International Spring Seminar on Electronics Technology (ISSE 2012), Bad Aussee; 09.05.2012 - 13.05.2012; in: "Book of Abstracts", (2012), ISBN: 978-3-85465-015-7; S. 162 - 163.
  280. G. Radosavljevic, A. Maric, L. Zivanov, W. Smetana, G. Stojanovic:
    "High quality PCB inductors";
    Vortrag: Second ReClMiCo Workshop: New Trends in Integrated Microsystems and Components, Novi Sad, Serbia; 05.03.2010 - 06.03.2010; in: "New Trends in Integrated Microsystems and Components", University of Novs Sad, Faculty of Technical Science, (2010), ISBN: 978-86-7892-287-9; S. 27 - 33.
  281. G. Radosavljevic, A. Maric, L. Zivanov, W. Smetana, G. Stojanovic:
    "RF-characterisation of LTCC microinductors using vector network analyzer and wafer probe station";
    Vortrag: 1st ReCIMiCo Workshop on Design and Characterization of Integrated Microsystems and Components, Novi Sad, Serbien; 29.09.2008 - 30.09.2008; in: "Proceedings of 1st ReCIMiCo Workshop", (2008), S. 92 - 98.
  282. G. Radosavljevic, A. Maric, L. Zivanov, W. Smetana:
    "Realization of high quality RF inductors using LTCC technology";
    Vortrag: 19th Telecommunications forum TELFOR 2011, Belgrade, Serbia; 22.11.2011 - 24.11.2011; in: "Conference Proceedings", (2011), ISBN: 978-1-4577-1498-6; S. 984 - 987.
  283. G. Radosavljevic, A. Maric, L. Zivanov, W. Smetana:
    "Wireless Resonant Pressure Sensors Realized in LTCC-Technology";
    Vortrag: Eureka E!4570 IPCTECH New Generation of 3-D Integrated Passive Components & Microsystems in LTCC-Technology Meeting, Krakow, Poland; 28.03.2012 - 29.03.2012; in: "Proceedings", (2012), S. 11.
  284. G. Radosavljevic, A. Maric, G. Stojanovic, W. Smetana:
    "'Sensitivity Improvement of Pressure Sensor Fabricated in LTCC Technology (Poboljsanje osetljivosti senzora pritiska realizovanog u LTCC tehnologiji)";
    Vortrag: The Fifth Scientific-Technical Meeting InterRegioSci 2010, Novi Sad; 28.04.2010; in: "Book of Abstracts", (2010), S. 23.
  285. G. Radosavljevic, A. Maric, W. Smetana, L. Zivanov:
    "Performance Improvement of RF Inductors Using LTCC Technology";
    Vortrag: IMAPS/ACerS 7th International Conference and Exhibition on Ceramic Interconnect and Ceramic Microsystems Technologies (CICMT 2011), San Diego, California, USA; 05.04.2011 - 07.04.2011; in: "Conference Proceedings", (2011), ISBN: 0-930815-92-0; 5 S.
  286. G. Radosavljevic, A. Marić, G. Stojanović, L. Zivanov, W. Smetana, M. Unger, H. Homolka:
    "The fabrication process of RF inductor structures in LTCC technolog";
    Vortrag: International Semiconductor Conference CAS, Sinai, Romania; 15.10.2007 - 17.10.2007; in: "Proceedings of CAS 2007", (2007), ISBN: 1-4244-0847-4; S. 249 - 252.
  287. G. Radosavljevic, A. Marić, G. Stojanović, L. Zivanov, W. Smetana:
    "Application of the LTCC technology for the fabrication on miniature 3D RF transformers";
    Poster: International Conference of IMAPS Poland Chapter, Rseszow-Krasiczyn, Poland; 23.09.2007 - 26.09.2007; in: "Proceedings of the XXXI International Conference of IMAPS Poland Chapter", (2007), ISBN: 978-83-917701-4-6; S. 191 - 194.
  288. G. Radosavljevic, N. Blaz, A. Maric, W. Smetana, L. Zivanov:
    "Mechanical, Electrical and Thermal Characterization of Commercially Available LTCC Dielectric Tapes";
    Vortrag: International Conference on Materials and Applications for Sensors and Transducers, Budapest, Hungary; 24.05.2012 - 28.05.2012; in: "Conference Proceedings", (2013), S. 1 - 4.
  289. G. Radosavljevic:
    "Resonant Sensors Realized in LTCC-technology for Wireless Monitoring of Physical Parameters";
    Hauptvortrag: 48th International Conference on Microelectronics, Devices and Materials - MIDEM, Otocec, Slovenia (eingeladen); 19.09.2012 - 21.09.2012; in: "Conference Proceedings", (2012), ISBN: 978-961-92933-2-4; S. 69 - 77.
  290. H. Radhakrishnan, N. Bednar, T. Bearda, R. Roozeman, J. Heikkinen, N. Adamovic, A. Ulyashin, M. Syvertsen, I. Gordon:
    "Solar Cells on <50µm Thick Epitaxial Foils Conductively Bonded to Low-Cost Si Carrier";
    Vortrag: 33rd European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC), Amsterdam; 25.09.2017 - 29.09.2017; in: "EU PVSEC 2017 - 33rd European Photovoltaic Solar Energy Conference and Exhibition", (2017), ISSN: 2196-0992; S. 431 - 436.

    Zusätzliche Informationen
  291. J. Prasek, D. Houska, R. Hrdy, J. Hubalek, U. Schmid:
    "Optimization of Deep Reactive Ion Etching Process for on Chip Energy Storage";
    Vortrag: 42nd International Spring Seminar on Electronics Technology - ISSE2019, Wroclaw, Polen; 15.05.2019 - 19.05.2019; in: "42nd International Spring Seminar on Electronics Technology", (2019), ISBN: 978-83-7493-070-3; S. 175 - 176.

    Zusätzliche Informationen
  292. G. Popovic, D. Petrovic, W. Brenner, H. Detter:
    "Some Training Aspects in Micro System Technology";
    Vortrag: EWME 2002, Vigo, Spanien; 22.05.2002 - 26.05.2002; in: "4th European Workshop on Microelectronics Education", M. Perez, F. Rodriguez, M. Rodriguez, N. Melendez, R. Andina, R. Pardo, V. Pena (Hrg.); (2002), ISBN: 84-267-1325-4; S. 25 - 28.
  293. G. Popovic, R. Monk, R. Tomellini:
    "Micro-/nanontechnology - Challenges and Perspectives for Research and Training";
    Vortrag: 1st Vienna International Conference on Micro- and Nano-Technology - Viennano'05, Vienna, Austria; 09.03.2005 - 11.03.2005; in: "1st Vienna International Conference - Proceedings", Österreichische Tribologische Gesellschaft, Wien (2005), ISBN: 3-901657-17-7; S. 77 - 83.

    Zusätzliche Informationen
  294. G. Popovic, E. Chatzitheodoridis, H. Detter, W. Brenner et al.:
    "From Microstructures to Microsystems - Results of a Joint European Project";
    Vortrag: International Intersociety, Electronic Packaging Technical Conference (InterPACK), Kauai, Hawaii; 08.07.2001 - 13.07.2001; in: "Proceedings of InterPACK ´01", (2001), ISBN: 0-7918-3530-8; S. 15672.

    Zusätzliche Informationen
  295. G. Popovic, E. Chatzitheodoridis, W. Brenner, D. Petrovic, A. Vujanic, H. Detter et al.:
    "Assembly of Micromechanical Components - European Network";
    Vortrag: SPIE The International Society for Optical Engineering, Cannes, France; 25.04.2001 - 27.04.2001; in: "Design, Test, Integration and Packaging of MEMS/MOEMS 2001", B. Courtois, J. Karam, S. Levitan, K. Markus, A. Tay, J. Walker et al. (Hrg.); SPIE- The International Society for Optical Engineering, 4408 (2001), ISBN: 0-8194-4109-0; S. 522 - 527.

    Zusätzliche Informationen
  296. G. Popovic, E. Chatzitheodoridis, W. Brenner, H. Detter, D. Petrovic et al.:
    "Education and Training Methods in MEMS Crossing National Borders";
    Vortrag: International Intersociety, Electronic Packaging Technical Conference (InterPACK), Kauai, Hawaii; 08.07.2001 - 13.07.2001; in: "Proceedings of InterPACK ´01", (2001), ISBN: 0-7918-3530-8; S. 15648.

    Zusätzliche Informationen
  297. G. Popovic, E. Chatzitheodoridis, W. Brenner, H. Detter et al.:
    "Handling and Assembly in MST - Results of the European HAFAM Network";
    Vortrag: iMEMS, Singapore; 04.07.2001 - 06.07.2001; in: "Proceedings of the international MEMS Workshop 2001", F. Tay Eng Hock et al. (Hrg.); (2001), ISBN: 981-04-4165-7; S. 595 - 602.

    Zusätzliche Informationen
  298. G. Popovic, J. Brößner, H. Detter et al.:
    "MEMS - Training and Education - Aspects of the OGMS";
    Vortrag: International Intersociety, Electronic Packaging Technical Conference (InterPACK), Kauai, Hawaii; 08.07.2001 - 13.07.2001; in: "Proceedings of InterPACK ´01", (2001), ISBN: 0-7918-3530-8; S. 15649.

    Zusätzliche Informationen
  299. G. Popovic, W. Brenner, D. Petrovic, A. Almansa, O. Del Medico, H. Detter:
    "From a Simple Microstructure to a Complex Microsystem - Handling and Assembly in Microsystem Technology";
    Vortrag: Informationstagung Mikroelektronik (ME), Wien; 10.10.2001 - 11.10.2001; in: "ME 01", D. Donhoffer, G. Fiedler (Hrg.); Im Eigenverlag des ÖVE, Nr. 26/Wien (2001), ISBN: 3-85133-022-6; S. 295 - 302.
  300. G. Popovic, W. Brenner, H. Detter:
    "Handling and Assembly of Functionally Adapted Microcomponents - HAFAM";
    Vortrag: Integration and Packaging of MEMS/MOEMS, Paris, France; 10.10.1999; in: "Proc. of SPIE", (1999), ISBN: 0-8194-3154-0; S. 696 - 705.
  301. G. Popovic, W. Brenner, H. Detter:
    "MST-Decreasing of the Dimensions, Education and Training - Increasing of the Knowledge";
    Vortrag: iMEMS, Singapore; 04.07.2001 - 06.07.2001; in: "Proceedings of the international MEMS Workshop 2001", F. Tay Eng Hock (Hrg.); (2001), ISBN: 981-04-4165-7; S. 541 - 548.

    Zusätzliche Informationen
  302. G. Popovic, A. Almansa, D. Petrovic, E. Chatzitheodoridis, F. Sümecz, H. Detter, O. Del Medico, W. Brenner:
    "Handling and Assembly of Microcomponents";
    Vortrag: SMT/HYBRID/PACKAGING 2002, Nürnberg, Deutschland; 18.06.2002 - 20.06.2002; in: "System Integration in Micro Electronics", H. Reichl (Hrg.); VDE Verlag, Berlin (2002), ISBN: 3-8007-2712-9; S. 127 - 140.
  303. G. Popovic, A. Almansa, E. Chatzitheodoridis, D. Petrovic, O. Del Medico, F. Sümecz, H. Detter, W. Brenner:
    "Handling and Assembly in MST - Final Results of a European Network";
    Vortrag: International Conference on Microelectronics (MIEL), Nis, Yugoslavia; 12.05.2002 - 15.05.2002; in: "23rd International Conference on Microelectronics", Eigenverlag, Vol. 1 (2002), ISBN: 0-7803-7235-2; S. 251 - 254.
  304. D. Platz, G. Pfusterschmied, U. Schmid:
    "Modelling Fluid Damping of Non-Conventional Vibration Modes in MEMS Resonators";
    Vortrag: Eurosensors 2018, Graz, Österreich; 09.09.2018 - 12.09.2018; in: "Proceedings - Eurosensors 2018, Graz", MDPI, (2018), ISSN: 2504-3900; S. 1 - 4.

    Zusätzliche Informationen
  305. D. Platz, G. Pfusterschmied, U. Schmid:
    "Theoretical Framework for modelling the fluid-structure interaction of complex MEMS/NEMS resonator eigenmodes";
    Vortrag: Euromech Colloquium 603, Cork, Irland; 05.09.2018 - 07.09.2018; in: "Proceedings of the Euromech Colloquium 603", Universidade do Porto, Reitoria, (2018), ISBN: 978-989-746-185-9; S. 38 - 40.

    Zusätzliche Informationen
  306. D. Platz, A. Gesing, U. Schmid:
    "Modeling the Fluid-Structure Interaction of Non-conventional Vibrational Modes for MEMS Fluid Sensing";
    Vortrag: SMSI 2020 Conference - Sensor and Measurement Science International, Nürnberg; 22.06.2020 - 25.06.2020; in: "SMSI 2020 Conference - Sensor and Measurement Science International", VDE, (2020), S. 109 - 110.

    Zusätzliche Informationen
  307. D. Platz, A. Gesing, U. Schmid:
    "Modellierung der Fluiddämpfung unkonventioneller Schwingungsmoden in MEMS-Resonatoren - Modelling fluid damping of non-conventional vibrational modes in MEMS resonators";
    Vortrag: MikroSystemTechnik Kongress 2019, Berlin, D; 28.10.2019 - 30.10.2019; in: "MikroSystemTechnik Kongress 2019 - Proceedings", VDE Verlag GMBH, (2019), ISBN: 978-3-8007-5090-0; S. 278 - 281.

    Zusätzliche Informationen
  308. D. Platz, A. Gesing, U. Schmid:
    "Modelling Vibrational Modes Plates in Fluids for Applications in High-Speed Atomic Force Microscopy";
    Vortrag: 8th Multifrequency AFM conference, Madrid; 27.10.2020 - 30.10.2020; in: "8th Multifrequency AFM conference, Book of Abstracts", (2020), S. 33.

    Zusätzliche Informationen
  309. D. Platz, A. Gesing, U. Schmid:
    "Spectral Response of MEMS Plate Resonators Exhibiting Non-conventional Vibrational Modes in Fluids";
    Vortrag: SMSI 2021 - Sensor and Measurement Science International Digital Conference, online; 03.05.2021 - 06.05.2021; in: "SMSI 2021 Conference - Sensor and Measurement Science International Digital Conference", VDE, (2021), S. 143 - 144.

    Zusätzliche Informationen
  310. D. Platz, D. Forchheimer, U. Schmid, J. E. Sader, D. Haviland:
    "Reconstructing Nonlinear Interactions in Micro- and Nanosystems with the Numerical Kernel Estimate Method";
    Vortrag: ICoNSoM 2019 - International Conference on Nonlinear Solid Mechanics, Rom, I; 20.06.2019 - 23.06.2019; in: "International Conference on Nonlinear Solid Mechanics", (2019), S. 1.

    Zusätzliche Informationen
  311. A. Platil, M. Vopálenský, P. Ripka, P. Kaspar, H. Hauser:
    "Improvement of AMR Magnetometer Precision";
    Poster: 16th European Conference on Solid-State Transducers (EUROSENSORS XVI), Prague, Czech Republic; 15.09.2002 - 18.09.2002; in: "Proceedings Eurosensors XVI", (2002), ISBN: 80-01-02576-4; S. 339 - 340.
  312. G. Pfusterschmied, Chr. Weinmann, M. Schneider, M. Hospodka, J. Mirwald, B. Hofko, U. Schmid:
    "Bestimmung der dynamischen Viskosität von Bitumenderivaten bis 64000 mPa∙s mit piezoelektrischen MEMS-Resonatoren";
    Vortrag: MikroSystemTechnik Kongress 2019, Berlin, D; 28.10.2019 - 30.10.2019; in: "MikroSystemTechnik Kongress 2019 - Proceedings", VDE Verlag GMBH, (2019), ISBN: 978-3-8007-5090-0; S. 320 - 323.

    Zusätzliche Informationen
  313. G. Pfusterschmied, Chr. Weinmann, M. Hospodka, B. Hofko, M. Schneider, U. Schmid:
    "Sensing Fluid Properties Of Super High Viscous Liquids Using Non-Conventional Vibration Modes In Piezoelectrically Excited Mems Resonators";
    Poster: 32nd International Conference on Micro Electro Mechanical Systems (MEMS), Seoul, Korea; 27.01.2019 - 31.01.2019; in: "2019 IEEE 32nd International Conference on Micro Electro Mechanical Systems (MEMS)", IEEE, (2019), S. 735 - 738.

    Zusätzliche Informationen
  314. G. Pfusterschmied, M. Kucera, E Wistrela, W. Steindl, V Ruiz-Díez, A. Bittner, J.L. Sànchez-Rojas, U. Schmid:
    "Piezoelectric Response Optimization of Multi Roof-Tile Modes in MEMS Resonators by Variation of the Support Boundary Conditions";
    Vortrag: Transducers 2015, Anchorage, Alaska, USA; 21.06.2015 - 25.06.2015; in: "Proceedings of the 18th International Conference On Solid State Sensors and Actuators - Transducers 2015", IEEE, (2015), ISBN: 978-1-4799-8955-3; S. 969 - 972.

    Zusätzliche Informationen
  315. G. Pfusterschmied, M. Kucera, Chr. Weinmann, M. Schneider, A. Bittner, J.L. Sànchez-Rojas, U. Schmid:
    "Two-step Procedure for Multi-Mode MEMS Resonator-Based Sensing of Fluid Properties";
    Vortrag: MEMS 2017, Las Vegas, USA; 22.01.2017 - 26.01.2017; in: "IEEE 30th International Conference on Micro Electro Mechanical Systems (MEMS) 2017", IEEE, (2017), ISBN: 9781509050796; S. 1013 - 1016.

    Zusätzliche Informationen
  316. G. Pfusterschmied, M. Kucera, J. Toledo, W. Steindl, V Ruiz-Díez, A. Bittner, M. Schneider, J.L. Sànchez-Rojas, U. Schmid:
    "Wine Fermentation Monitoring Using Piezoelectric MEMS Resonators";
    Poster: The 20th International Conference on Miniaturized Systems for Chemistry and Life Sciences (μTAS 2016), Dublin, Irland; 09.10.2016 - 13.10.2016; in: "Proceedings of the 20th International Conference on Miniaturized Systems for Chemistry and Life Sciences (μTAS 2016)", IEEE, (2016), 2 S.

    Zusätzliche Informationen
  317. G. Pfusterschmied, M. Kucera, W. Steindl, A. Bittner, M. Schneider, U. Schmid:
    "Überwachung der Dichteänderung während der Weinfermentation mit piezoelektrischen MEMS-Resonatoren";
    Vortrag: MikroSystemTechnik Kongress 2017, München, Deutschland; 23.10.2017 - 25.10.2017; in: "MikroSystemTechnik Kongress 2017 - Proceedings", VDE Verlag GMBH, (2017), ISBN: 978-3-8007-4491-6; S. 183 - 186.

    Zusätzliche Informationen
  318. G. Pfusterschmied, M. Kucera, V Ruiz-Díez, A. Bittner, J.L. Sànchez-Rojas, U. Schmid:
    "Multi Roof Tile-Shaped Vibration Modes In Mems Cantilever Sensors For Liquid Monitoring Purposes";
    Vortrag: 28th IEEE International Conference on Micro Electro Mechanical Systems (MEMS) - MEMS 2015, Estoril, Portugal; 18.01.2015 - 22.01.2015; in: "MEMS 2015", IEEE, (2015), ISBN: 978-1479979554; S. 718 - 721.

    Zusätzliche Informationen
  319. D. Petrovic, G. Popovic, E. Chatzitheodoridis, O. Del Medico, A. Almansa, F. Sümecz, P. Herbst, W. Brenner, H. Detter, R. Duffait:
    "µEDM-produced Mechanical Grippers for Handling and Assembly in Microtechnology";
    Vortrag: SPIE The International Society for Optical Engineering, Adelaide, Australia; 17.12.2001 - 19.12.2001; in: "Device and Process Technologies for MEMS and Microelectronics II", SPIE- The International Society for Optical Engineering, Volume 4592 (2001), ISBN: 0-8194-4322-0; S. 172 - 182.
  320. D. Petrovic, G. Popovic, E. Chatzitheodoridis, O. Del Medico, A. Almansa, F. Sümecz, W. Brenner, H. Detter:
    "Gripping Tools for Handling and Assembly of Microcomponents";
    Vortrag: International Conference on Microelectronics (MIEL), Nis, Yugoslavia; 12.05.2002 - 15.05.2002; in: "23rd International Conference on Microelectronics", Eigenverlag, Vol. 1 (2002), ISBN: 0-7803-7235-2; S. 247 - 250.
  321. D. Petrovic, G. Popovic, E. Chatzitheodoridis, O. Del Medico, A. Almansa, H. Detter, W. Brenner:
    "Mechanical gripper system for handling and assembly in MEMS";
    Vortrag: SPIE The International Society for Optical Engineering, San Francisco, USA; 22.10.2001 - 24.10.2001; in: "Micromachining and Microfabrication Process Technology VII", SPIE- The International Society for Optical Engineering, Volume 4557 (2001), ISBN: -0-8194-4285-2; S. 151 - 156.

    Zusätzliche Informationen
  322. D. Petrovic, E. Chatzitheodoridis, G. Popovic, O. Del Medico, A. Almansa, W. Brenner, H. Detter, RO Martins, E. Fortunato:
    "Design of a Mechanical Gripper for Assembly of Microparts";
    Vortrag: Associazione Italiana per l´Analisi delle Sollecitazioni, Algero (SS) (eingeladen); 12.09.2001 - 15.09.2001; in: "XXX Convegno Nazionale dell´Associazione Italiana per l´Analisi delle Sollecitazioni", (2001), S. 1369 - 1373.

    Zusätzliche Informationen
  323. M. Petrides, A. Pauschitz, F. Franek:
    "Influence of Model Tests on the Selection of Lubricants for Gears in Dental Instruments";
    Vortrag: 2nd World Tribology Congress, Wien; 03.09.2001 - 07.09.2001; in: "Abstracts of Papersof 2nd World Tribology Congress 2001", F. Franek, W.J. Bartz, A. Pauschitz et al. (Hrg.); Österreichische Tribologische Gesellschaft, Abstracts of Papers (2001), ISBN: 3-901657-08-8; S. 855.

    Zusätzliche Informationen
  324. P. Peterko, C. Lenauer, M. Jech, F. Franek:
    "Influence Of The Oilfilter On The Wear Measurement Using Radioactive Particles";
    Vortrag: ÖTG SYMPOSIUM 2010 - WETTBEWERBSVORSPRUNG DURCH TRIBOLOGISCHE INNOVATIONEN - Beherrschung von Reibung und VerschleiB durch Oberflachen- und Schmierstofftechnik, Dornbirn, V; 18.11.2010; in: "SYMPOSIUM 2010 - WETTBEWERBSVORSPRUNG DURCH TRIBOLOGISCHE INNOVATIONEN - Beherrschung von Reibung und VerschleiB durch Oberflachen- und Schmierstofftechnik", österreichische Tribologische Gesellschaft, (2010), ISBN: 978-3-901657-37-5; S. 265 - 268.

    Zusätzliche Informationen
  325. D. Pelletier, J. Rakotoniaina, L. Federzoni, N. Adamovic:
    "Cabriss: an European Project to Develop a Circular Economy based on Recycled, Reused and Recovered Indium, Silicon and Silver Materials for Photovoltaic and other Applications";
    Vortrag: PhotoVoltaic Technical Conference 2016 - PVTC 2016, Marseille, F; 09.05.2016 - 11.05.2016; in: "Abstracts of the PhotoVoltaic Technical Conference 2016", (2016).
  326. A. Pauschitz, A. Vujanic, G. Haddad:
    "Messung ultrakleiner Momente bei tribologischen Systemen";
    Vortrag: ÖTG-Symposium 1998, Wien; 03.12.1998; in: "ÖTG-Symposium 1998", F. Franek (Hrg.); (1998), ISBN: 3-901657-03-7; S. 127 - 136.
  327. A. Pauschitz, M. Roy, F. Franek:
    "On the chemical composition of the layers formed during sliding of metallic alloys at high temperature";
    Vortrag: Review Conference on the scientific cooperation between Austria, Poland and their world-wide partners, Vienna; 23.04.2004 - 27.04.2004; in: "Tribology Science and Application", (2004), ISBN: 83-88443-61-5; S. 511.
  328. A. Pauschitz, C. Kajdas, F. Franek:
    "Tribological investigation of biologically friendly lubricants";
    Vortrag: Review Conference on the scientific cooperation between Austria, Poland and their world-wide partners, Vienna; 23.04.2003 - 27.04.2003; in: "Tribology Science and Application", M. Herman, F. Franek, C. Kajdas (Hrg.); (2003), ISBN: 83-88443-61-5; S. 451 - 468.
  329. A. Pauschitz, C. Kajdas, F. Franek:
    "Tribologische Untersuchungen biologisch-verträglicher Schmierstoffe-Teil 1";
    Vortrag: ÖTG-Symposium 2002, Wiener Neustadt; 29.11.2002; in: "Industrielle Tribologie", F. Franek, A. Pauschitz (Hrg.); Österreichische Tribologische Gesellschaft, Wien (2002), ISBN: 3-901657-11-8; S. 87 - 98.
  330. A. Pauschitz, F. Franek, W. Zhang:
    "Berechnung und Konstruktion leistungsfähiger Sintergleitlager";
    Vortrag: 10th International Colloquium "Tribology - Solving Friction and Wear Problems", TAE, Ostfildern (D); 09.01.1996 - 11.01.1996; in: "Tribology - Solving Friction and Wear Problems, Band/Vol. 1", W.J. Bartz (Hrg.); TAE - Technische Akademie Esslingen, Ostfildern (1996), S. 609 - 618.
  331. A. Pauschitz, F. Franek, A. Vujanic:
    "Tribological investigations on sub-miniature tribosystems";
    Vortrag: 1st Asia International Conference on Tribology, Beijing, P.R.China; 12.10.1998 - 15.10.1998; in: "Proceedings of the 1st Asia International Conference on Tribology", Tsinghua University Press, Volume 1 (1998), S. 288 - 294.
  332. A. Pauschitz, F. Franek et al.:
    "Center of Competence of Industrial Tribology (Kplus AC2T)";
    Vortrag: Frühjahrstagung ÖGO, Krems (eingeladen); 10.05.2001 - 11.05.2001; in: "Frühjahrstagung", Ö. ÖGO et al. (Hrg.); (2001), S. 1 - 6.
  333. A. Pauschitz, F. Franek, A. Barabolia:
    "Theoretische und experimentelle Untersuchungen des Tribosystems Kugel - Tinte - Papier";
    Vortrag: Tribologie Fachtagung 2000, D-Esslingen; 25.09.2000 - 27.09.2000; in: "Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen; Tagungsband 1", GfT - Gesellschaft für Tribologie, Moers (2000), S. 7/1 - 7/6.
  334. A. Pauschitz, F. Franek, A. Barabolia:
    "Thin Surface Coatings with Nano-Scale Perticles - Tribological Properties for Various Conditions";
    Poster: 12th Internat. Colloquium "Tribology 2000 - Plus", Ostfildern; 11.01.2000 - 13.01.2000; in: "Tribology 2000 - Plus, Vol. II", W.J. Bartz (Hrg.); TAE - Techn. Akademie Esslingen, Ostfildern (2000), S. 1069 - 1074.
  335. A. Pauschitz, F. Franek, A. Barabolia:
    "Beurteilung von Oberflächenschichten mit nanoskaligen Partikeln";
    Vortrag: ÖTG-Symposium 1998, Wien, Ö; 03.12.1998; in: "Qualitätssicherung, Prüftechnik und Sensorik in der Tribologie", F. Franek (Hrg.); Österreichische Tribologische Gesellschaft, Wien (1998), ISBN: 3-901657-03-7; S. 127 - 136.
  336. A. Pauschitz, F. Franek, A. Barabolia:
    "Mechanisch-dynamische Prüfungen tribotechn. Funktionsschichten";
    Vortrag: ÖTG-Symposium 1999, Wien; 02.12.1999; in: "Einsatz und Charakterisierung technischer Oberflächen für tribologische Anwendungen", F. Franek (Hrg.); Österr. Tribolog. Gesellschaft, Wien (1999), ISBN: 3-901657-04-5; S. 75 - 90.
  337. A. Pauschitz, F. Franek, A. Barabolia:
    "Thin Surface Coatings with Nano-Scale Particles - Tribological Properties for Various Conditions";
    Vortrag: 2000 12th International Colloquium, Göttingen, D; 11.01.2000 - 13.01.2000; in: "TAE Tagunsband", W.J. Bartz (Hrg.); (2000), S. 1069 - 1074.
  338. A. Pauschitz, F. Franek:
    "Lebensdaueroptimierung von Sintergleitlagern";
    Vortrag: Produktinnovation im Maschinenwesen durch Simulation, Wien (eingeladen); 10.04.2000 - 11.04.2000; in: "Produktinnovation im Maschinenwesen durch Simulation", ÖIAV, (2000), ISBN: 3-7067-0025-5; S. 59 - 67.
  339. A. Pauschitz, F. Franek:
    "Methoden und Potentiale beim Tribologie-orientierten Qualitätsmanagement i.d. Antriebstechn.";
    Vortrag: ÖTG-Symposium 1997, Wien (eingeladen); 04.12.1997; in: "Störungsfreie Antriebstechnik durch angewandte Tribologie", F. Franek, A. Pauschitz (Hrg.); Österreichische Tribologische Gesellschaft, Wien (1997), ISBN: 3-901657-01-0; S. 7 - 26.
  340. A. Pauschitz, F. Franek:
    "Optimization of tribosystems in dental instruments";
    Vortrag: 27th Leeds-Lyon Symposium on Tribology, Lyon, F; 05.09.2000 - 08.09.2000; in: "27th Leeds-Lyon Symposium on Tribology", INSA-Lyon, (2000).
  341. A. Pauschitz, F. Franek:
    "Zur Oberflächenbeurteilung poröser Bauteile";
    Vortrag: 12. Internationales Kolloquium TU-Budapest, Balatonfüred; 07.09.1995 - 09.09.1995; in: "Advanced manufacturing repair and technologies in vehicle industry", TU Budapest, Budapest (1995), S. 138 - 143.
  342. F. Patocka, M. Schneider, C. Schneidhofer, N. Dörr, U. Schmid:
    "Novel MEMS Sensor for Real-time Lubricant Condition Monitoring";
    Vortrag: ÖTG-Symposium 2018 - Tribologie in Industrie und Forschung: Neue Aufgaben - Quo Vadis?, Wien; 22.11.2018; in: "ÖTG-Symposium 2018", ÖTG, (2018), S. 115 - 122.
  343. F. Patocka, M. Schlögl, M. Schneider, C. Schneidhofer, N. Dörr, U. Schmid:
    "MEMS Sensor for Monitoring the Degradation of Lubricating Oils";
    Vortrag: 7th European Conference on Tribology (Ecotrib 2019), Wien; 12.06.2019 - 14.06.2019; in: "7th European Conference on Tribology (Ecotrib 2019) - Book of Abstracts", (2019), ISBN: 978-3-901657-60-3; S. 138 - 139.

    Zusätzliche Informationen
  344. F. Patocka, M. Schlögl, M. Schneider, U. Schmid:
    "Novel MEMS Sensor for Detecting Magnetic Particles in Liquids";
    Vortrag: Eurosensors 2018, Graz, Österreich; 09.09.2018 - 12.09.2018; in: "Proceedings - Eurosensors 2018, Graz", MDPI, (2018), ISSN: 2504-3900; S. 1 - 4.

    Zusätzliche Informationen
  345. S. Partel, S. Zoppel, P. Hudek, T. Auer, J. Zehetner, W. Smetana, H. Homolka, B. Balluch:
    "Entwicklung zusammenhängender Fertigungsschritte für optische, elektrische und fluidische Mikrosysteme";
    Vortrag: Dornbirner Mikrotechniktage, Dornbirn, Österreich; 30.05.2006 - 31.05.2006; in: "Dornbirner Mikrotechniktage 2006 - Technologie, Verfahren und Anwendungen der Mikrotechnik", (2006).
  346. M. Oliver, J. Hernando-Garcia, J. Olivares, M. Clement, A. Ababneh, U. Schmid, J.L. Sànchez-Rojas:
    "Sputtered polycrystalline AlN as a platform for biofunctionalized devices";
    Vortrag: SPIE Europe: Microtechnologies for the New Millennium, Dresden, Deutschland; 04.05.2009 - 08.05.2009; in: "Proceedings of SPIE", Society of Photo-Optical Instrumentation Engineers (SPIE), 7362-7366 (2009), 10 S.

    Zusätzliche Informationen
  347. J. Nicolics, M. Weilguni, R. Medek, G. Langer, F. Lutschounig:
    "Thermal Impedance Study of High-Power LED Flashlight Assembly";
    Vortrag: 33rd International Spring Seminar on Electronics Technology (ISSE 2010), Warsaw, Poland; 12.05.2010 - 16.05.2010; in: "Book of Abstracts", (2010), ISBN: 978-83-7207-874-2; S. 49 - 50.
  348. J. Nicolics, M. Unger, M. Morianz, H. Stahr, St. Groß:
    "Thermal Characterization of a Pedelec 500W Motor Driver Module with Embedded Power Devices";
    Vortrag: 40th International Spring Seminar on Electronics Technology - ISSE 2017, Sofia, Bulgarien; 11.05.2017 - 14.05.2017; in: "IEEE Proc. of ISSE 2017", (2017), ISBN: 978-1-5386-0582-0; Paper-Nr. B07, 6 S.
  349. J. Nicolics, W. Smetana, M. Fasching:
    "Reliability aspects in solder joints of sealed casings for power applications";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Budapest, Hungary; 07.05.2008 - 11.05.2008; in: "Abstract Proceedings - Reliability and Life-time Predition", (2008), ISBN: 978-963-06-4915-5; S. 50 - 51.
  350. J. Nicolics, L. Musiejovsky, M. Mündlein, J. Zehetner, J. Steurer, I. Giouroudi, H. Hauser:
    "Laser Welding Process and Packaging for Magnetic Field Sensors";
    Poster: International Spring Seminar on Electronics Technology (ISSE), St. Marienthal, Germany; 10.05.2006 - 14.05.2006; in: "Proc. of. 29th Int. Spring Seminar on Electronics Technology", (2006), ISBN: 1-4244-0551-3; S. 469 - 474.
  351. J. Nicolics, L. Musiejovsky, M. Mündlein, H. Hauser, J. Zehetner:
    "Laser Welding Process Optimization for the Production of Magnetic Field Sensors";
    Poster: International Spring Seminar on Electronics Technology (ISSE), St. Marienthal, Germany; 10.05.2006 - 14.05.2006; in: "Conference Program and Abstracts", (2006), ISBN: 3-934142-23-0; S. 214 - 215.
  352. J. Nicolics, L. Musiejovsky, G. Hanreich:
    "Comparison of the Thermal Performance of Plastic-encapsulated and Hermetically Sealed Packages";
    Vortrag: 3rd European Conference on Packaging Technology (EuPac 98), Nuremberg, BRD; 05.06.1998; in: "DVS 191, Proc. of European Conference on Packaging Technology (EuPac 98)", (1998), S. 175 - 178.

    Zusätzliche Informationen
  353. J. Nicolics, L. Musiejovsky:
    "Approximation Methods for Thermal Simulation of High-Lead Count Packages";
    Vortrag: International Spring Seminar on Electronics Technology (ISSE), Göd, Hungary; 21.05.1996 - 25.05.1996; in: "Proceedings of the 1996 International Spring Seminar on Electronics Technology (ISSE 96)", (1996), S. 61 - 67.
  354. J. Nicolics, M. Mündlein, A. Jaturapiree:
    "Electrically Conductive Adhesives - Recent Research Results and Specific Applications";
    Vortrag: International Conference of IMAPS Poland Chapter, Wroclaw, Poland; 26.09.2004 - 29.09.2004; in: "Proceedings of IMAPS 2004", (2004), S. 61 - 68.
  355. J. Nicolics, M. Mündlein, G. Hanreich, A. Zluc, H. Stahr, M. Franz:
    "Thermal Analysis of Multilayer Printed Circuit Boards with Embedded Carbon Black-Polymer Resistors";
    Vortrag: International Spring Seminar on Electronics Technology (ISSE), Cluj-Napoca, Romania; 09.05.2007 - 13.05.2007; in: "Proc. of 30th Int. Spring Seminar on Electronics Technology", (2007), ISBN: 1-4244-1218-8; S. 46 - 52.
  356. J. Nicolics, M. Mündlein, G. Hanreich, M. Franz, A. Zluc, H. Stahr:
    "Thermal Analysis of Embedded Carbon-Polymer Resistors in Multilayer Printed Circuit Boards";
    Vortrag: International Spring Seminar on Electronics Technology (ISSE), Cluj-Napoca, Romania; 09.05.2007 - 13.05.2007; in: "Book of Abstracts of 30th Int. Spring Seminar on Electronics Technology", (2007), ISBN: 978-973-713-174-4; S. 50 - 51.
  357. J. Nicolics, M. Mündlein, M. Fasching:
    "Minimization of the Thermal Interface Resistance of Power SMD Assemblies for High-Temperature Applications";
    Vortrag: International Spring Seminar on Electronics Technology (ISSE), St. Marienthal, Germany; 10.05.2006 - 14.05.2006; in: "Proc. of. 29th Int. Spring Seminar on Electronics Technology", (2006), ISBN: 1-4244-0551-3; S. 49 - 54.
  358. J. Nicolics, G. Langer, F. Lutschounig, K. Lang, R. Huber:
    "Impact of Printed Circuit Board Technology on Thermal Performance of High-Power LED Assembly - Experimental Results";
    Vortrag: 3rd Electronics System Integration Technology Conference, ESTC 2010, Berlin, Berlin; 13.09.2010 - 16.09.2010; in: "Book of Abstracts", (2010).
  359. J. Nicolics, P. Krivic, P.L. Fulmek, F. Wenzl, C. Sommer, P. Hartmann, P. Pachler, H. Hoschopf, G. Langer:
    "Thermal Issues of Phosphor Converted LEDs";
    Vortrag: LED professional Symposium +Expo 2012, Bregenz; 25.09.2012 - 27.09.2012; in: "LED Lighting Technologies, International Winning Approaches", (2012), ISBN: 978-3-9503209-4-7; S. 22 - 27.
  360. J. Nicolics, W. Kremser:
    "Investigation of the Steady State and Transient Thermal Properties of a PLCC Package";
    Vortrag: 20th Conference on Hybrid Microelectronics (ISHM 96), Jurata, Poland; 05.09.1996; in: "Proc. of 20th Conf. of the International Society for Hybrid Microelectronics, (ISHM 96)", (1996), S. 219 - 222.
  361. J. Nicolics, W. Kremser:
    "Transient Thermal Analysis of a PLCC Package Using the Finite Element Method";
    Vortrag: XX ISHM Conference, Jurata, Poland; 05.09.1996; in: "Abstracts Proc. of XX ISHM Conf.", (1996), S. 83 - 84.
  362. J. Nicolics, G. Hanreich, G. Stangl:
    "Investigation of the Thermal Performance of Micro-Whisker Structured Silicon Heatspreaders";
    Vortrag: International Conference on Microelectronics (MIEL), Nis, Yugoslavia; 14.05.2000 - 17.05.2000; in: "Proc. of IEEE", IEEE Catalog, No. 00TH8400 (2000), S. 671 - 674.

    Zusätzliche Informationen
  363. J. Nicolics, G. Hanreich, M. Fasching, W. Hachmeister, M. Mündlein:
    "Laserlöten und -entlöten von Leadless Components";
    Vortrag: Technologietag: Miniaturisierung in der Elektronik 2001, Stockerau und Korneuburg, NÖ; 28.11.2001; in: "Miniaturisierung in der Elektronik", R. Bonifert (Hrg.); (2001), ISBN: 3-902204-01-x; S. 43 - 50.
  364. J. Nicolics, E. Gehberger, H. Hainzl, M. Mündlein:
    "Isotrop leitfähige Kleber - eine Alternative zu Lot in der Oberflächenmontagetechnik";
    Vortrag: Elektronische Baugruppen - Aufbau- und Fertigungstechnik, Fellbach; 06.02.2002 - 07.02.2002; in: "GMM-Fachbericht: Elektronische Baugruppen", (2002), S. 375 - 381.
  365. J. Nicolics, M. Franz, V. Deepak, G. Weichslberger:
    "Influence of the Printed Circuit Board on the Assembly's Thermal Performance by the Example of Power LED based Lamp Prototypes";
    Poster: 32nd International Spring Seminar on Electronics Technology (ISSE), Brno, Czech Republic; 13.05.2009 - 17.05.2009; in: "ISSE 2009 Conference Proceedings", (2009), ISBN: 978-1-4244-4260-7; S. 62 - 63.
  366. J. Nicolics, M. Franz, V. Deepak, G. Weichslberger:
    "Innovative Printed Circuit Board Technology for Heat Removal with Application to Power LED based Operating Room Lamps";
    Vortrag: 32nd International Spring Seminar on Electronics Technology (ISSE), Brno, Czech Republic; 13.05.2009 - 17.05.2009; in: "ISSE 2009 Conference Proceedings", (2009), ISBN: 978-1-4244-4260-7; S. 13 - 17.
  367. J. Nicolics:
    "Current Research Activities and Industry Cooperations at the Institut für Werkstoffe der Elektrotechnik";
    Vortrag: 20th Conference on Hybrid Microelectronics (ISHM 96), Jurata, Poland; 05.09.1996; in: "Proc. of 20th Conf. of the International Society for Hybrid Microelectronics, (ISHM 96)", (1996), S. 39 - 44.

    Zusätzliche Informationen
  368. J. Nicolics:
    "New Materials, Developement of Technologies, and Applications";
    Vortrag: International Spring Seminar on Electronics Technology (ISSE), Göd, Hungary; 21.05.1996 - 25.05.1996; in: "Proceedings of the 1996 International Spring Seminar on Electronics Technology (ISSE 96)", (1996), S. 8 - 13.

    Zusätzliche Informationen
  369. J. Nicolics:
    "New Results from Research Activities and Industry Cooperations in the Field of Interconnection Technology";
    Vortrag: International Spring Seminar on Electronics Technology (ISSE), Szklarska Poreba; 05.06.1997; in: "Proceedings of 20th Int. Spring Seminar on Electronics Technology (ISSE 97)", (1997), S. 66 - 71.
  370. A. Neuhaus, F. Franek, A. Pauschitz, C. Schrank:
    "The influence of load and contact material on the tangential separation force of low current switching contacts";
    Vortrag: ÖTG-Symposium 2006, Steyr; 23.11.2006; in: "Zukunftstrends tribologischer Komponenten in der Antriebstechnik", ÖTG, (2006), ISBN: 978-3-901657-23-8; S. 151 - 162.

    Zusätzliche Informationen
  371. W. Nemitz, F. Wenzl, S. Schweitzer, C. Sommer, P. Hartmann, P.L. Fulmek, J. Nicolics:
    "A self-compensation approach for chromaticity coordinate maintenance of phosphor converted LEDs upon temperature variations";
    Vortrag: 38th International Spring Seminar on Electronics Technology-ISSE 2015, Eger, Hungary; 01.05.2015 - 02.05.2015; in: "Book of Abstracts", Budapest University of Technology and Economics, (2015), ISBN: 978-963-313-177-0; S. 98 - 99.
  372. W. Nemitz, F. Wenzl, S. Schweitzer, C. Sommer, P. Hartmann, P.L. Fulmek, J. Nicolics:
    "A self-compensation approach for maintaining the chromaticity coordinates of phosphor converted LEDs upon temperature variations";
    Vortrag: LED professional Symposium + Expo 2014, Bregenz, Austria; 30.09.2014 - 02.10.2014; in: "Proceedings of LED professional Symposium +Expo", (2014), S. 66 - 73.
  373. W. Nemitz, C. Sommer, S. Schweitzer, P. Hartmann, P.L. Fulmek, J. Nicolics, F. Wenzl:
    "Chromaticity coordinate maintenance of phosphor converted LEDs by a self-compensation approach";
    Vortrag: 38th International Spring Seminar on Electronics Technology-ISSE 2015, Eger, Hungary; 06.05.2015 - 10.05.2015; in: "Proceedings", Budapest University of Technology and Economics, (2015), ISBN: 978-963-313-177-0; S. 183 - 187.
  374. W. Nemitz, P.L. Fulmek, J. Nicolics, F. Wenzl:
    "Determining the thermal load of phosphor converted LEDs by an iterative optical and thermal simulation procedure";
    Vortrag: Optical Modeling and Performance Predictions VIII, San Diego, CA, USA; 28.08.2016; in: "Proceedings", Volume 9953 (2016), S. 99530C-1.
  375. I. A. Neacșu, G. Vorlaufer, S. J. Eder, B. Scheichl, F. Franek:
    "On the Steady-State Behaviour of Porous Journal Bearings - Bridging the Gap between Simulation and Experiments";
    Vortrag: 43rd Leeds-Lyon Symposium on Tribology (The Jost Report- 50 years on), Leeds Trinity University, Leeds, UK; 06.09.2016 - 09.09.2016; in: "Book of Abstracts", University of Leeds, (2016), 2 S.
  376. B. Nagl, K. Pietsch, W. Gschohsmann, W. Smetana:
    "Thermal performance of traction IGBT´s";
    Poster: International Conference of IMAPS Poland Chapter, Pultusk, Poland; 21.09.2008 - 24.09.2008; in: "Abstracts Proceedings of the XXXII International Conference of IMAPS Poland Chapter", (2008), ISBN: 978-83-917701-6-0; 1 S.
  377. B. Nagl, J. Nicolics, E. Suhir, W. Gschohsmann:
    "Thermomechanical Consideration of Stress and Strain of a Thick-Wire Bond During Short-Circuit Load";
    Vortrag: 35th International Spring Seminar on Electronics Technology (ISSE 2012), Bad Aussee; 09.05.2012 - 13.05.2012; in: "Book of Abstracts", (2012), ISBN: 978-3-85465-015-7; S. 116 - 117.
  378. B. Nagl, J. Nicolics:
    "Analyses of thermo mechanically related failures of traction IGBT power modules at short circuit switching";
    Poster: 3rd Electronics System Integration Technology Conference, ESTC 2010, Berlin, Berlin; 13.09.2010 - 16.09.2010; in: "Book of Abstracts", (2010).
  379. B. Nagl, B. Czerny, M. Lederer, G. Khatibi, M. Thoben, J. Nicolics:
    "Electro-Thermal Analysis of In Situ Vibration Measurements on IGBT Modules under Operation Conditions";
    Poster: 4th IEEE Electronics Systemintegration Technology Conference ESTC 2012, Amsterdam, the Netherlands; 17.09.2012 - 20.09.2012; in: "Conference Proceedings", (2012), S. 1 - 6.
  380. B. Nagl, B. Czerny, M. Lederer, G. Khatibi, M. Thoben, J. Nicolics:
    "Experimental Investigation of Transient Electrical, Thermal and Mechanical Behavior of IGBT Inverter Modules during Operation";
    Poster: ISPSD 2013 - 25th International Symposium on Power Semiconductor Devices & ICs, Kanazawa, Japan; 26.05.2013 - 30.05.2013; in: "IEEE Xplore", (2013), S. 293 - 296.
  381. L. Musiejovsky, H. Schrottmayer, J. Nicolics:
    "Solid-Solder Technology for Laser Soldering - An Alternative to Solder Pastes";
    Vortrag: 5th Int. Conf. on Brazing, High Temperature Brazing and Diffusion Bonding (LÖT 98), Aachen, BRD; 05.06.1998; in: "DVS Proc. of 5th Int. Conf. on Brazing, High Temperature Brazing and Diffusion Bonding", (1998), S. 278 - 282.

    Zusätzliche Informationen
  382. L. Musiejovsky, J. Nicolics, H. Schrottmayer:
    "Thermal Simulation of a Laser Soldering Process for the Attachment of Fine-Pitch Components";
    Vortrag: International Spring Seminar on Electronics Technology (ISSE), Göd, Hungary; 21.05.1996 - 25.05.1996; in: "Proceedings of the 1996 International Spring Seminar on Electronics Technology (ISSE 96)", (1996), S. 240 - 247.
  383. L. Musiejovsky, J. Nicolics, H. Hauser, G. Brasseur:
    "Thermal Performance of Plastic-Encapsulated and Hermetically Sealed Components for Automotive Applications";
    Poster: IEEE Instrumentation and Measurement Technology Conference (IMTC 98), St. Paul, USA; 18.05.1998 - 21.05.1998; in: "Proc. of IMTC 98", IEEE Catalog, 98CH3622 (1998), ISBN: 0-7803-4797-8; S. 1185 - 1188.
  384. M. Mündlein, B. Valentin, R. Chabicovsky, J. Nicolics, J. Weremczuk, G. Tarapata, R. Jachowicz:
    "Transepidermal Water Loss (TEWL) Measurements with Two Novel Sensors Based on Different Sensing Priciples";
    Poster: EUROSENSORS XX, Göteborg, Schweden; 17.09.2006 - 20.09.2006; in: "Proceedings EUROSENSORS 2006", Vol. I (2006), ISBN: 91-631-9280-2; S. 348 - 349.
  385. M. Mündlein, J. Nicolics, J. Morris:
    "Reliability Investigations of Isotropic Conductive Adhesives";
    Vortrag: 25th International Spring Seminar on Electronics Technology, Prague, Czech Republic; 11.05.2002 - 14.05.2002; in: "Proceedings ISSE 2002", (2002), S. 329 - 333.
  386. M. Mündlein, J. Nicolics, G. Hanreich:
    "Accelerated Curing of Isotropically Conductive Adhesives by Vapor Phase Heating";
    Vortrag: 3rd International IEEE Conference on Polymers and Adhesives in Microelectronics and Photonics (Polytronic 2003), Montreux, Switzerland; 21.10.2003 - 23.10.2003; in: "Proceedings of the 3rd International IEEE Conference Polytronic 2003", (2003), S. 101 - 105.
  387. M. Mündlein, J. Nicolics, H. Hainzl, E. Gehberger:
    "Innovative Verbindungstechnik - Bleifreies Löten Leitkleben";
    Vortrag: Mikroelektronik 2003 (ME 2003), Wien, Ö; 01.10.2003 - 02.10.2003; in: "Tagungsband Mikroelektronik 2003", (2003), ISBN: 3-85133-030-7; S. 437 - 442.
  388. M. Mündlein, J. Nicolics, E. Gehberger, H. Hainzl:
    "Leitfähige Kleber - Eine Alternative zu Lot in der Oberflächenmontagetechnik";
    Vortrag: Informationstagung Mikroelektronik (ME), Wien, Ö; 10.10.2001 - 11.10.2001; in: "Beiträge der Informationstagung ME01", D. Donhoffer, G. Fiedler (Hrg.); ÖVE-Schriftenreihe, 26 (2001), ISBN: 3-85133-022-6; S. 271 - 276.
  389. M. Mündlein, J. Nicolics, E. Gehberger, H. Hainzl:
    "Leitfähige Kleber - Eine Alternative zu Lot in der Oberflächenmontagetechnik";
    Vortrag: 10. TEClab Technologietag, Korneuburg, Ö; 27.06.2001; in: "Innovative Verbindungstechniken", R. Bonifert (Hrg.); (2001), ISBN: 3-902204-00-1; S. 58 - 63.
  390. M. Mündlein, J. Nicolics, E. Gehberger, H. Hainzl:
    "Conductive adhesive - an alternative to solder in SMT";
    Vortrag: International Spring Seminar on Electronics Technology (ISSE), Calimanesti - Caciulata, Romania; 05.05.2001 - 09.05.2001; in: "Conference Proceedings ISSE 01", (2001), ISBN: 0-7803-7111-9; S. 20 - 20.
  391. M. Mündlein, J. Nicolics, R. Chabicovsky, P. Svasek, E. Svasek, T. Komeda, H. Funakubo, T. Nagashima, M. Ito:
    "Packaging of a thin film sensor for transepidermal water loss measurements";
    Vortrag: 26th International Spring Seminar on Electronics Technology, Stará Lesná, Slovak Republic; 08.05.2003 - 11.05.2003; in: "Proceedings ISSE 2003", (2003), ISBN: 0-7803-8002-9; S. 328 - 333.
  392. M. Mündlein, J. Nicolics, R. Chabicovsky, N. Sekiguchi, T. Komeda, H. Funakubo, G. Stangl:
    "Innovative Packaging Concept of a Miniaturized Skin Moisture Sensor and First Measuing Results";
    Vortrag: EMBEC'02 2nd European Medical & Biological Engineering Conference, Vienna, Austria; 04.12.2002 - 08.12.2002; in: "Proceedings Part II", H. Hutten, P. Krösl (Hrg.); (2002), S. 968 - 969.
  393. M. Mündlein, J. Nicolics, Martin Brandl:
    "Multichipmodul in Feinstleiter-Ätztechnik";
    Vortrag: Elektronische Baugruppen - Aufbau- und Fertigungstechnik, Fellbach; 04.02.2004 - 05.02.2004; in: "GMM-Fachbericht: Elektronische Baugruppen", 44 (2004), ISBN: 3-8007-2813-3; S. 511 - 516.
  394. M. Mündlein, J. Nicolics, Martin Brandl:
    "Packaging Concept for a Miniaturized Wirelessly Interrogable Temperature Logger";
    Vortrag: International Spring Seminar on Electronics Technology (ISSE), Banya, Bulgaria; 13.05.2004 - 16.05.2004; in: "Conference Proceedings ISSE 2004", Book 1 (2004), ISBN: 0-7803-8422-9; S. 68 - 73.
  395. M. Mündlein, J. Nicolics:
    "Electrical Resistance Modeling of Isotropically Conductive Adhesive Joints";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Wiener Neustadt; 19.05.2005 - 22.05.2005; in: "Proc. of. 28th Int. Spring Seminar on Electronics Technology", (2005), ISBN: 0-7803-9325-2; S. 144 - 149.
  396. M. Mündlein, J. Nicolics:
    "Modeling of particle arrangement in an isotropically conductive adhesive joint";
    Vortrag: IEEE International Conference on Polymers & Adhesives (Polytronic), Portland, Oregon, USA; 12.09.2004 - 15.09.2004; in: "Conference Proceedings Polytronic 2004", (2004), ISBN: 0-7803-8744-9; S. PP3-1 - PP3-6.
  397. M. Mündlein, J. Nicolics:
    "Simulating the Contact Formation in Isotropically conductive Adhesives";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Wr. Neustadt, Austria; 19.05.2005 - 22.05.2005; in: "Book of Abstracts - 28th ISSE 2005", (2005), ISBN: 3-85133-036-6; S. 100 - 101.
  398. M. Mündlein, H. Hauser, J. Nicolics, R. Chabicovsky:
    "Partial Discharge Current Measurement in High Permittivity Dielectrics and their Meaning for Quality Control";
    Poster: 26th International Spring Seminar on Electronics Technology, Stará Lesná, Slovak Republic; 08.05.2003 - 11.05.2003; in: "Proceedings ISSE 2003", (2003), ISBN: 0-7803-8002-9; S. 438 - 443.
  399. M. Mündlein, G. Hanreich, J. Nicolics:
    "Application of an ICA for the Production of a Radiation Sensor";
    Vortrag: 3rd International IEEE Conference on Polymers and Adhesives in Microelectronics and Photonics (Polytronic 2003), Montreux, Switzerland; 21.10.2003 - 23.10.2003; in: "Proceedings of the 3rd Intern. IEEE Conference Polytronic 2003", (2003), S. 123 - 127.
  400. M. Mündlein, G. Hanreich, J. Nicolics:
    "Simulation of the Aging Behavior of Isotropic Conductive Adhesives";
    Vortrag: 2nd Intern. IEEE Conf. on Polymers and Adhesives in Microelectronics and Photonics, POLYTRONIC 2002, Zalaegerszeg, Hungary; 23.06.2002 - 26.06.2002; in: "Conference Proceedings Polytronic 2002", (2002), S. 68 - 72.
  401. M. Mündlein, M. Fasching, J. Nicolics:
    "Optimization of Thermal Performance of D2PAK-SMD Assemblies for High-Temperature Applications";
    Vortrag: FH Vorarlberg Symposium Mikrosystemtechnik für die Industrie, Dornbirn; 30.05.2006 - 31.05.2006; in: "Dornbirner Mikrotechniktage 2006 - Technologie, Verfahren und Anwendungen der Mikrotechnik", (2006), S. 1 - 3.
  402. M. Mündlein, R. Chabicovsky, J. Nicolics, B. Valentin, P. Svasek, E. Svasek, T. Komeda, H. Funakubo, T. Nagashima, T. Itoh:
    "Mikrosensor zur Bestimmung des Transepidermalen Wasserverlustes der Menschlichen Haut";
    Poster: Mikroelektronik 2003 (ME 2003), Wien, Ö; 01.10.2003 - 02.10.2003; in: "Tagungsband Mikroelektronik 2003", (2003), ISBN: 3-85133-030-7; S. 349 - 354.
  403. M. Mündlein, R. Chabicovsky, J. Nicolics, B. Valentin, P. Svasek, E. Svasek, T. Komeda, H. Funakubo, T. Nagashima, M. Ito:
    "Microsensor for the Measurement of the Transepidermal Water Loss of Human Skin";
    Poster: GMe Forum 2005, Vienna, Austria; 17.03.2005 - 18.03.2005; in: "Proceedings of the Seminar GMe Forum 2005", K. Riedling (Hrg.); (2005), ISBN: 3-901578-15-3; 4 S.
  404. M. Mündlein, A. Brunner, J. Nicolics, R. Chabicovsky, N. Sekiguchi, T. Suzuki:
    "Prototype of a Skin Humidity Sensor and Initial Experiments";
    Vortrag: 25th International Spring Seminar on Electronics Technology, Prague, Czech Republic; 11.05.2002 - 14.05.2002; in: "Proceedings ISSE 2002", (2002), S. 95 - 99.
  405. M. Mündlein, A. Brunner, R. Chabicovsky, G. Stangl, J. Nicolics:
    "Innovative Verbindungstechnik für einen Miniaturisierten Hautfeuchtesensor";
    Vortrag: Informationstagung Mikroelektronik (ME), Wien, Ö; 10.10.2001 - 11.10.2001; in: "Beiträge der Informationstagung ME01", D. Donhoffer, G. Fiedler (Hrg.); (2001), ISBN: 3-85133-022-6; S. 225 - 230.
  406. M. Mündlein, A. Brunner, R. Chabicovsky, G. Stangl, J. Nicolics:
    "A New Interconnection Technique for the Attachment of Sensors";
    Vortrag: International Spring Seminar on Electronics Technology (ISSE), Calimanesti - Caciulata, Romania; 05.05.2001 - 09.05.2001; in: "Conference Proceedings ISSE 01", (2001), ISBN: 0-7803-7111-9; S. 277 - 281.
  407. J. Morris, J. Nicolics:
    "Research Student Exchange Consortium Proposal";
    Vortrag: International Spring Seminar on Electronics Technology (ISSE), Calimanesti - Caciulata, Romania; 05.05.2001 - 09.05.2001; in: "Conference Proceedings ISSE 01", (2001), ISBN: 0-7803-7111-9; S. 1 - 6.
  408. Ph. Moll, G. Pfusterschmied, M. Schneider, M. Dorfmeister, U. Schmid:
    "Piezoelectric Switching Of Bistable Mems Membranes In Fluids";
    Vortrag: IEEE 34th International Conference on Micro Electro Mechanical Systems (MEMS), online; 25.01.2021 - 29.01.2021; in: "2021 IEEE 34th International Conference on Micro Electro Mechanical Systems (MEMS)", IEEE, (2021), ISBN: 978-1-6654-1912-3; S. 544 - 547.

    Zusätzliche Informationen
  409. S. Mitic, H. Kim, A. Vujanic:
    "Development of a Graphical Tactile Display based on Electromagnetic Actuators";
    Vortrag: International Conference on Microelectronics (MIEL), Nis, Serbia and Montenegro; 16.05.2004 - 19.05.2004; in: "Proceeding of the 24th International Conference on Microelectronics", Vol. 1 (2004), ISBN: 0-7803-8166-1; S. 1 - 4.
  410. G. Miskovic, S. Toskov, G. Radosavljevic, A. Maric, N. Blaz:
    "Behavior of Heraeus CT 703 Tape in Water Environment";
    Poster: IEEE - 2012 International Conference and Exposition on Electrical and Power Engineering (EPE 2012), Iasi, Romania; 25.10.2012 - 27.10.2012; in: "Conference Proceedings", (2012), ISBN: 978-1-4673-1172-4; S. 137 - 140.
  411. G. Miskovic, S. Toskov, A. Maric, N. V. Blaz, G. Radosavljevic:
    "Characterization of Dielectric LTCC Tapes";
    Vortrag: 36th International Spring Seminar on Electronics Technology - ISSE 2013, Alba Iulia, Romania; 08.05.2013 - 12.05.2013; in: "Book of Abstracts", (2013), ISBN: 978-606-613-064-6; S. 86 - 87.
  412. G. Miskovic, M. V. Nikolic, M. D. Lukovic, Z. Z. Vasiljevic, J. Nicolics, O. S. Aleksic:
    "Pseudobrookite thick films for potential application as low-temperature sensitive material in NO gas sensors";
    Vortrag: 40th International Spring Seminar on Electronics Technology - ISSE 2017, Sofia, Bulgarien; 11.05.2017 - 14.05.2017; in: "IEEE Proc. of ISSE 2017", (2017), ISBN: 978-1-5386-0582-0; 6 S.
  413. G. Miskovic, M. D. Lukovic, M. V. Nikolic, Z. Z. Vasiljevic, J. Nicolics, O. S. Aleksic:
    "Analysis of electronic properties of pseudobrookite thick films with possible application for gas sensors";
    Vortrag: 39th International Spring Seminar on Electronics Technology (ISSE 2016), Pilsen, Czech Republic; 18.05.2016 - 22.05.2016; in: "Proceedings ISSE 2016", (2016), ISBN: 978-1-5090-1389-0; S. 386 - 391.
  414. G. Miskovic, M. D. Lukovic, M. V. Nikolic, Z. Z. Vasiljevic, J. Nicolics, O. S. Aleksic:
    "Possible Nitrogen Oxide and Carbon Monoxide Gas Sensing Using Pseudobrookite Thick Films";
    Vortrag: 40th International Spring Seminar on Electronics Technology - ISSE 2017, Sofia, Bulgarien; 11.05.2017 - 14.05.2017; in: "IEEE Proc. of ISSE 2017", (2017), ISBN: 978-1-5386-0582-0; Paper-Nr. A06, 2 S.
  415. G. Miskovic, M. Hrovat, S. Drnovsek, G. Radosavljevic:
    "Grain Size Dependence of Titanium Dioxide Nano-paste on Sintering Temperature for Gas Sensing Application";
    Vortrag: 38th International Spring Seminar on Electronics Technology-ISSE 2015, Egerzalog, Hungary; 01.05.2015 - 02.05.2015; in: "Extended Abstracts", Budapest University of Technology and Economics, (2015), ISBN: 978-963-313-177-0; S. 192 - 193.
  416. G. Miskovic, M. Hrovat, S. Drnovsek, M. Nikolic, O. S. Aleksic, G. Radosavljevic:
    "Grain Size and Porosity Dependence of Titanium Dioxide Nano-Paste on Sintering Temperature forGas Sensing Application";
    Vortrag: 38th International Spring Seminar on Electronics Technology-ISSE 2015, Eger, Hungary; 06.05.2015 - 10.05.2015; in: "Proceedings", Budapest University of Technology and Economics, (2015), ISBN: 978-1-4799-8860-0; S. 402 - 407.
  417. G. Miskovic, J. Fernandez, H. Homolka, M. Unger, L. Vuckovic, G. Radosavljevic:
    "Physical and electrical Characterisation of LTCC Tapes";
    Vortrag: 37th International Spring Seminar on Electronics Technology, Dresden; 07.05.2014 - 11.05.2014; in: "Proceedings 37th Int. Spring Seminar on Electronics Technology", (2014), ISBN: 978-1-4799-4455-2; S. 110 - 111.
  418. G. Miskovic, N. Blaz, A. Maric, M. Damnjanovic, G. Radosavljevic:
    "Modelovanje i karakterizacija LC senzora pomeraja";
    Poster: 56th Conference for Electronics, Telecommunications, Computers, Automation and Nuclear Engineering - ETRAN, Zlatibor, Serbia; 11.06.2012 - 14.06.2012; in: "Conference Proceedings", (2012), ISBN: 978-86-80509-67-9; S. 1 - 4.
  419. Y. Ming-Hui, R. Grössinger, M. Küpferling, Z. Zhi-Dong, H. Hauser, R. Sato, B. Enzberg-Mahlke:
    "Analysis of the Hysteresis Loop of Permanent Magnets by the Energetic Model";
    Vortrag: 16th Rare Earth Workshop on Permanent Magnets, Sendai; 09.09.2000 - 14.09.2000; in: "Proceedings of 16th Rare Earth Workshop on Permanent Magnets", (2000).
  420. G. Mikolasch, A. Pauschitz, F. Franek:
    "Anwendung der elektrischen Impedanz zur In-situ-Bestimmung des Oberflächenverhaltens von naßlaufenden Friktionselementen";
    Vortrag: 10th International Colloquium "Tribology - Solving Friction and Wear Problems", Ostfildern (D); 09.01.1996 - 11.01.1996; in: "Tribology - Solving Friction and Wear Problems, Band/Vol. 2", W.J. Bartz (Hrg.); TAE - Technische Akademie Esslingen, Ostfildern (1996), S. 1007 - 1013.
  421. G. Mikolasch, A. Pauschitz, F. Franek, G. Abraham:
    "Boundary Lubrication Determination of Friction Material";
    Poster: World Tribology Congress, London, GB; 08.09.1997 - 12.09.1997; in: "World Tribology Congress - Abstracts of Papers", Mechanical Engineering Publications Limited, London (1997), ISBN: 1-86058-1099; S. 711.
  422. Y. Melikhov, S. J. Lee, S. H. Song, H. Hauser, D. Jiles:
    "Jones Matrix Analysis of a New Magneto-Optic Angular Displacement Sensor";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Wr. Neustadt, Austria; 19.05.2005 - 22.05.2005; in: "Book of Abstract", (2005), ISBN: 3-85133-036-6; S. 72 - 73.
  423. Y. Melikhov, S. J. Lee, D. Jiles, C. Park, H. Hauser:
    "Improved Modeling of the Magneto-Optic Angular Displacement Sensor";
    Vortrag: 12th International Symposium on Ultrafast Phenomena in Semiconductors, Bad Gastein, Austria; 12.09.2005 - 14.09.2005; in: "Short Paper Proceedings ISEM 2005", (2005), ISBN: 3-902105-00-1; S. 90 - 91.
  424. Y. Melikhov, H. Hauser, L. Li, D. Jiles, R. Grössinger:
    "Effects of anisotropy and stress on the non-linear magnetic susceptibility of ferromagnets";
    Poster: APS March Meeting, Montréal, Canada; 22.03.2004 - 26.03.2004; in: "Bulletin of the American Physical Society", 49/1 (2004), S. 1253.
  425. N. Mehboob, R. Grössinger, P. Oser, P.L. Fulmek, M. Kriegisch, I. Tomas:
    "Temperature Dependent Measurements of Hysteresis Properties on Soft Magnetic Materials";
    Poster: Soft Magnetic Materials (SMM 19), Torino, Italy; 06.09.2009 - 09.09.2009; in: "Book of Abstracts", (2009), S. B2-29.
  426. R. Medek, J. Nicolics, D. Schrottmayer:
    "High Sensitive Pulse Industive Eddy Current Measurement For Mine Detection Systems";
    Vortrag: International Spring Seminar on Electronics Technology (ISSE), Calimanesti - Caciulata, Romania; 05.05.2001 - 09.05.2001; in: "Conference Proceedings ISSE 01", (2001), ISBN: 0-7803-7111-9; S. 207 - 211.
  427. R. Medek, J. Nicolics, H. Hauser:
    "Recent Progresses on the Development of an Yttrium Orthoferrite Based Optical Switch";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Cluj-Napoca, Romania; 09.05.2007 - 13.05.2007; in: "IEEE Proc. of 30th Int. Spring Seminar on Electronics Technology", (2007), ISBN: 1-4244-1218-8; S. 361 - 366.
  428. R. Medek, J. Nicolics, P.L. Fulmek:
    "Aperture Magnetooptical Switch - First Results with Labor Prototype";
    Vortrag: International Spring Seminar on Electronics Technology (ISSE), Budapest, Hungary; 07.05.2008 - 11.05.2008; in: "Abstract Proceedings - Reliability and Life-time Prediction", (2008), ISBN: 978-963-06-4915-5; S. 132 - 133.
  429. R. Medek, J. Kellner, H. Schweinzer:
    "Improving the Radiation Properties of a Piezoceramic Air Ultrasound Transducer by adding a Ceramic Membrane";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Brno, Czech Republic; 13.05.2009 - 17.05.2009; in: "32nd International Spring Seminar on Electronics Technology", CFP09509 (2009), ISBN: 978-1-4244-4260-7; Paper-Nr. B02, 5 S.

    Zusätzliche Informationen
  430. R. Medek, J. Kellner, H. Schweinzer:
    "Increasing the Output of a Piezoceramic Air Ultrasound Transducer by Coupling Vibrations to a Ceramic Membrane";
    Poster: 32nd International Spring Seminar on Electronics Technology (ISSE), Brno, Czech Republic; 13.05.2009 - 17.05.2009; in: "ISSE 2009 Conference Proceedings", (2009), ISBN: 978-1-4244-4260-7; S. 98 - 99.
  431. R. Medek, H. Hauser, D. Schrottmayer:
    "Eddy current sensing in pulse inductive mine detection systems";
    Poster: 4th European Magnetic Sensors and Actuators Conference (EMSA 2002), Athens, Greece; 03.07.2002 - 05.07.2002; in: "Book of Abstracts EMSA 2002", (2002), S. S7_P6.
  432. R. Medek, H. Hauser, J. Nicolics:
    "Development of a Miniaturized Orthoferrite Based Optical Switch with Improved Electromagnetic Compatibility - First Results";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Cluj-Napoca, Romania; 09.05.2007 - 13.05.2007; in: "Book of Abstracts of 30th Int. Spring Seminar on Electronics Technology", (2007), ISBN: 978-973-713-174-4; S. 180 - 181.
  433. A. Mazloum-Nejadari, M. Lederer, G. Khatibi, B. Czerny, L. Weiss, J. Nicolics:
    "Investigation on the Lifetime of Copper Wire Bonds in Electronic Packages under Thermal and Mechanical Cyclic Loading";
    Vortrag: 7th Electronic System-Integration Technology Conference (ESTC), Dresden, Germany; 18.09.2018 - 21.09.2018; in: "Proceedings ESTC 2018", (2018), ISBN: 978-1-5386-6814-6; 7 S.
  434. A. Mazloum Nejadari, M. Lederer, G. Khatibi, J. Nicolics:
    "Crystal plasticity modeling of the heat affected zone of copper micro-wires";
    Vortrag: European Microelectronics and Packaging Conference 2017 (EMPC), Warsaw, Poland; 10.09.2017 - 13.09.2017; in: "Proceedings of the European Microelectronics and Packaging Conference EMPC", (2017), 6 S.
  435. A. Mazloum Nejadari, G. Khatibi, M. Lederer, B. Czerny, J. Nicolics, L. Weiss:
    "Reliability analysis of Cu wire bonds in microelectronic packages";
    Hauptvortrag: 17th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2016, Deutschland (eingeladen); 18.04.2016 - 20.04.2016; in: "17th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems", IEEE, Deutschland (2016), ISBN: 978-1-5090-2106-2; Paper-Nr. 16, 8 S.
  436. P.M. Mayrhofer, E Wistrela, M. Schneider, A. Bittner, U. Schmid:
    "Precise determination of d33 and d31 from piezoelectric deflection measurements and 2D FEM simulations applied to ScxAl1-xN";
    Poster: 30th Eurosensors Conference, EUROSENSORS 2016, Budapest, Hungary; 04.09.2016 - 07.09.2016; in: "Proceedings of the Eurosensors 2016", Procedia Engineering / Elsevier, 168 (2016), ISSN: 1877-7058; S. 876 - 879.

    Zusätzliche Informationen
  437. P.M. Mayrhofer, E Wistrela, M. Kucera, A. Bittner, U. Schmid:
    "Fabrication and Characterisation of ScAlN-based Piezoelectric MEMS Cantilevers";
    Vortrag: Transducers 2015, Anchorage, Alaska, USA; 21.06.2015 - 25.06.2015; in: "Proceedings of the 18th International Conference On Solid State Sensors and Actuators - Transducers 2015", IEEE, (2015), ISBN: 978-1-4799-8955-3; S. 2144 - 2147.

    Zusätzliche Informationen
  438. P.M. Mayrhofer, C. Rehlendt, A. Bittner, M. Schneider, U. Schmid:
    "Scandium Aluminium Nitride for MEMS Applications";
    Vortrag: nanoFIS 2016 - 2nd International Conference on Functional integrated nano Systems, Graz; 27.06.2016 - 29.06.2016; in: "nanoFIS 2016 - 2nd International Conference on Functional integrated nano Systems", (2016).

    Zusätzliche Informationen
  439. P.M. Mayrhofer, C. Rehlendt, A. Bittner, U. Schmid:
    "Scandium Aluminium Nitrid für MEMS Anwendungen---Poster";
    Poster: MESS16 - Microelectronic Systems Symposium, Wien; 28.04.2016 - 29.04.2016; in: "OVE Schriftenreihe", Schriftenreihe OVE, 83 (2016), ISBN: 978-3-85133-089-2; S. 23.
  440. P.M. Mayrhofer, H. Euchner, A. Bittner, U. Schmid:
    "Circular Patterned Test Structures for Precise Determination of Piezoelectric Thin Film Constants: Application to ScxAl1-xN";
    Poster: EUROSENSORS 2014 - 28th European Conference on Solid-State Transducers, Brescia, I; 07.09.2014 - 10.09.2014; in: "Procedia Engineering", Elsevier, 87 (2014), ISSN: 1877-7058; S. 112 - 115.

    Zusätzliche Informationen
  441. P.M. Mayrhofer, A. Bittner, U. Schmid:
    "High Temperature Stability of ScxAl1-xN (x= 0.27) Thin Films";
    Vortrag: Smart Sensors, Actuators and MEMS VII 2015, Barcelona, Spain; 04.05.2015 - 06.05.2015; in: "Proc. of SPIE Vol. 9517-9520", SPIE, 9517 (2015), ISSN: 0277-786x; Paper-Nr. 95171C, 7 S.

    Zusätzliche Informationen
  442. M. Mayer, J. Nicolics, G. Hanreich, M. Mündlein:
    "Thermal Aspects of GaAs Power FET Attachment Using Isotropically Conductive Adhesive";
    Vortrag: 2nd Intern. IEEE Conf. on Polymers and Adhesives in Microelectronics and Photonics, POLYTRONIC 2002, Zalaegerszeg, Hungary; 23.06.2002 - 26.06.2002; in: "Conference Proceedings Polytronic 2002", (2002), S. 38 - 43.
  443. A. Matzner, G. Abraham, P. Artemczuk, W. Brenner, F. Franek, C. Herza:
    "A New Device for Testing Micromotors and Rotating Microsystems";
    Poster: World Tribology Congress, London, GB; 08.09.1997 - 12.09.1997; in: "World Tribology Congress - Abstracts of Papers", Mechanical Engineering Publications Limited, London (1997), ISBN: 1-860581099; S. 782.
  444. J. Matovic, A. Vujanic, K. Reichenberger:
    "Variable Emissivity Surfaces for Micro and Nanosatelites";
    Vortrag: CANEUS 2006, Toulouse, France; 27.08.2006 - 01.09.2006; in: "Proceedings of CANEUS2006", (2006).
  445. J. Matovic, J. Lamovec, Z. Djinovic:
    "Bimaterial Infrared Detector with Efficient Suppression of Interference from Ambient";
    Vortrag: International Conference on Microelectronics (MIEL), Nis, Serbien und Montenegro; 16.05.2004 - 19.05.2004; in: "Proceedings of the MIEL 2004", 1 (2004), ISBN: 0-7803-8166-1; S. 349 - 352.
  446. J. Matovic, F. Keplinger, S. Wilson, Z. Jaksic:
    "Contactless Methods for Characterization of Mechanical Properties of Nanomembranes: An Overview of Methods";
    Poster: 4M 2011 - 8th International Conference on Multi-Material Micro Manufacture, Stuttgart, D; 08.11.2011 - 10.11.2011; in: "4M 2011 - Proceedings of the 8th International Conference on Multi-Material Micro Manufacture", Research Publishing, (2011), ISBN: 978-981-07-0319-6; S. 245 - 247.

    Zusätzliche Informationen
  447. J. Matovic, Z. Jaksic, N. Adamovic:
    "Nanomembrane - an overlooked 2D nanostructure";
    Poster: 3rd Conference Nanosensors for Industrial Applications - NANOSENS 2010, Vienna; 02.12.2010 - 03.12.2010; in: "Conference Documentation", (2010).

    Zusätzliche Informationen
  448. J. Matovic, Z. Jaksic:
    "Bimaterial actuators and sensor with built-in compensation of the ambient temperature interference";
    Vortrag: 4M 2007 - Third International conference on multi-material micro manufacture, Borovets, Bulgaria; 03.10.2007 - 05.10.2007; in: "4M 2007 - Third international Conference on multi-material micro manufacture - Proceedings", (2007), ISBN: 978-1904445-53-1; S. 151 - 154.

    Zusätzliche Informationen
  449. J. Matovic, Z. Jaksic:
    "Micromechanical sensors based on lateral and longitudinal displacement of a cantilever sensing element: A comparative performance study";
    Vortrag: SPIE Europe: Microtechnologies for the New Millennium, Dresden, Deutschland; 04.05.2009 - 08.05.2009; in: "Proceedings of SPIE", Society of Photo-Optical Instrumentation Engineers (SPIE), 7362 (2009), 10 S.

    Zusätzliche Informationen
  450. J. Matovic, Z. Jaksic:
    "Simple and reliable technology for manufacturing metal-composite nanomembranes with giant aspect ratio";
    Poster: 34th International Conference on Micro & Nano Engineering, Athen, Griechenland; 15.09.2008 - 19.09.2008; in: "Abstract Book", (2008), S. 247.

    Zusätzliche Informationen
  451. J. Matovic, N. Adamovic, U. Schmid, Z. Jaksic:
    "Nanomembranes - a link between MEMS and NEMS";
    Poster: Mikrosystemtechnik Kongress 2009, Berlin, D; 12.10.2009 - 14.10.2009; in: "Mikrosystemtechnik Kongress 2009 - Proceedings", VDE Verlag, (2009), ISBN: 978-3-8007-3183-1.

    Zusätzliche Informationen
  452. J. Matovic:
    "Stress control in bimaterial sensors and actuators";
    Vortrag: 4M 2005 - First International Conference on Multi-Material Micro Manufacture, Forschungszentrum Karlsruhe, Deutschland; 29.06.2005 - 01.07.2005; in: "4M - First Interantional Conference on Multi-Material Micro Manufacture - Proceedings", J. Matovic (Hrg.); Elsevier, (2005), ISBN: 0-080-44879-8; S. 465 - 468.

    Zusätzliche Informationen
  453. A. Maric, G. Radosavljevic, N. Blaz, L. Zivanov, W. Smetana:
    "Ferrite lnductors Fabricated in the LTCC Technology";
    Vortrag: Eureka E!4570 IPCTECH New Generation of 3-D Integrated Passive Components & Microsystems in LTCC-Technology Meeting, Krakow, Poland; 28.03.2012 - 29.03.2012; in: "Proceedings", (2012), S. 6.
  454. A. Maric, G. Radosavljevic, N. V. Blaz, L. Zivanov:
    "High Quality Spiral Transformer Embedded in LTCC Substrate";
    Vortrag: 36th International Spring Seminar on Electronics Technology - ISSE 2013, Alba Iulia, Romania; 08.05.2013 - 12.05.2013; in: "Book of Abstracts", (2013), ISBN: 978-606-613-064-6; S. 220 - 221.
  455. A. Maric, G. Radosavljevic, N. Blaz, W. Smetana, L. Zivanov:
    "Embedded Ferrite LTCC Inductors";
    Poster: IMAPS/ACerS 8th International CICMT Conference and Exhibition (2012), Erfurt, D; 16.04.2012 - 19.04.2012; in: "Proc. of 8th Conf. and Exhibition on Ceramic Interconnect and Ceramic Microsystems Technology (CICMT)", (2012), S. 388 - 393.
  456. A. Maric, N. V. Blaz, L. Zivanov, G. Radosavljevic:
    "Inductance Enhancement of Ferrite LTCC Inductor";
    Poster: 10th European Conference on Magnetic Sensors and Actuators (EMSA 2014), Vienna, Austria; 06.07.2014 - 09.07.2014; in: "Proceedings", (2014), S. 171.
  457. A. Maric, N. V. Blaz, G. Radosavljevic, S. Toskov, L. Zivanov:
    "Affect of Peak Sintering Temperature Variation on LTCC Ferrite Tape Complex Permeability";
    Vortrag: 37th International Spring Seminar on Electronics Technology, Dresden; 07.05.2014 - 11.05.2014; in: "Proceedings 37th Int. Spring Seminar on Electronics Technology", (2014), ISBN: 978-1-4799-4455-2; S. 18 - 19.
  458. A. Maric, N. Blaz, S. Toskov, G. Miskovic, L. Zivanov, G. Radosavljevic:
    "Implementation of LTCC Interdigital Capacitor for Detection of Liquid Quantity and Type";
    Poster: 48th International Conference on Microelectronics, Devices and Materials - MIDEM, Otocec, Slovenia; 19.09.2012 - 21.09.2012; in: "Conference Proceedings", (2012), ISBN: 978-961-92933-2-4; S. 279 - 284.
  459. A. Maric, N. Blaz, G. Radosavljevic, I. Atassi, L. Zivanov, W. Smetana:
    "Complex permeability dependence of commercial LTCC ferritic tape on ambient temperature";
    Poster: 20th International Conference on Soft Magnetic Materials, Kos Island, Greece; 18.09.2011 - 22.09.2011; in: "Conference Proceedings", (2011), ISBN: 978-960-9534-14-7; S. 255.
  460. A. Maric, N. Blaz, G. Radosavljevic, I. Atassi, L. Zivanov, W. Smetana:
    "Complex Permeability Dependence of Commercial LTCC Ferritic Tape on Ambient Temperature";
    Poster: 35th International Spring Seminar on Electronics Technology (ISSE 2012), Bad Aussee; 09.05.2012 - 13.05.2012; in: "Book of Abstracts", (2012), ISBN: 978-3-85465-015-7; S. 180 - 181.
  461. A. Maric, I. Atassi, N. V. Blaz, G. Radosavljevic, L. Zivanov, H. Homolka, W. Smetana, J. Nicolics:
    "Influence of Sintering Temperature on Complex Permeability of Ferritic LTCC in Wide Frequency Range";
    Poster: ISSE 2011, Tatranska Lomnica, Slovakia; 11.05.2011 - 13.05.2011; in: "Proceedings of the 34th International Spring Seminar on Electronics Technology", IEEE Xplore, (2011), ISBN: 978-1-4577-2112-0; S. 337 - 340.
  462. V. G. Marian, B. Scheichl, N. Tungkunagorn, G. Vorlaufer, F. Franek:
    "Evaluation of Mass Conservative Models for the Tribological Analysis of Porous Bearings";
    Vortrag: 11th International Congerence on Tribology - SERBIATRIB `09, Belgrade, Serbia; 13.05.2009 - 15.05.2009; in: "11th International Conference on Tribology - SERBIATRIB `09. PROCEEDINGS", Serbian Tribology Society and Faculty of Mechanical Engineering, (2009), ISBN: 978-86-7083-659-4; S. 220 - 223.
  463. T. Manzaneque, V Ruiz-Díez, J. Hernando-Garcia, E Wistrela, M. Kucera, U. Schmid, J.L. Sànchez-Rojas:
    "Density-viscosity Sensor Based on Piezoelectric MEMS Resonator and Oscillator Circuit";
    Vortrag: IEEE Sensors 2014, Valencia, Spanien; 02.11.2014 - 05.11.2014; in: "IEEE Sensors 2014", IEEE, (2014), ISBN: 978-1-4799-0162-3; S. 241 - 244.

    Zusätzliche Informationen
  464. T. Manzaneque, V Ruiz-Díez, J. Hernando-Garcia, E Wistrela, M. Kucera, A. Bittner, U. Schmid, J.L. Sànchez-Rojas:
    "Oscillator Circuit Based On Piezoelectric Bending Micro-Resonator Operated In Liquid Media";
    Vortrag: 24th Micromechanics and Microsystems Europe Conference - MME 2013, Espoo, Finland; 01.09.2013 - 04.09.2013; in: "Proceedings", (2013).

    Zusätzliche Informationen
  465. T. Manzaneque, J. Hernando-Garcia, L. Rodríguez-Aragón, A. Ababneh, H. Seidel, U. Schmid, J.L. Sànchez-Rojas:
    "Analysis of the Quality Factor of Piezoelectric-Actuated Micro- Resonators";
    Vortrag: SPIE Europe: Microtechnologies for the New Millennium, Dresden, Deutschland; 04.05.2009 - 08.05.2009; in: "Proceedings of SPIE", Society of Photo-Optical Instrumentation Engineers (SPIE, 7362-7366 (2009), 11 S.

    Zusätzliche Informationen
  466. K. Malecki, M Gioffrè, D. Andrijasevic, W. Brenner, F. Della Corte:
    "Investigation on Silicon-Glass Low Temperature Anodic Bonding";
    Vortrag: 2nd International Workshop on Wafer Bonding for MEMS Technologies, Halle an der Saale, Germany; 09.04.2006 - 11.04.2006; in: "2nd International Workshop on Wafer Bonding for MEMS Technologies - Book of Abstracts", (2006), S. 45 - 46.

    Zusätzliche Informationen
  467. F. Maier, M. Schneider, J. Schrattenholzer, U. Schmid:
    "Electrical and Microstructural Characterization of TiO2 Thin Films for Flexoelectric Devices";
    Vortrag: MME 2019 - 30th Micromechanics and Microsystems Europe workshop, Oxford; 18.08.2019 - 20.08.2019; in: "MME 2019 - 30th Micromechanics and Microsystems Europe workshop", (2019), S. 1 - 7.

    Zusätzliche Informationen
  468. F. Maier, M. Schneider, J. Schrattenholzer, U. Schmid:
    "Electrical and Microstructural Characterization of TiO2 Thin Films for Flexoelectric Devices";
    Vortrag: 30th Micromechanics and Microsystems Europe Workshop (MME) 2019, Wolfson College, Oxford, United Kingdom; 18.08.2019 - 20.08.2019; in: "Journal of Physics: Conference Series 1837", Journal of Physics: Conference Series, 1837 (2021), ISSN: 1742-6596; S. 1 - 7.

    Zusätzliche Informationen
  469. J. Machl, T. Wolbank, H. Hauser:
    "Advanced Current Sensing for Inverter Fed AC Drives - Modelling, Optimisation and Measurement";
    Vortrag: International Conference on Magnetic Measurements, Bratislava, Slowakia; 11.09.2002 - 13.09.2002; in: "The Book of Abstracts ", (2002), S. 106.

    Zusätzliche Informationen
  470. J. Machl, T. Wolbank, H. Hauser:
    "Investigations on the Spectral Distribution of the Mechanical Sensorless Control Signals Derived from CDI and Closed-Loop Compensating Current Sensor";
    Vortrag: Electrical Drives and Power Electronics Conference (EDPE), High Tatra, Slovakia; 24.09.2003 - 26.09.2003; in: "Proceedings of Electrical Drives and Power Electronics Conference", (2003), ISBN: 80-86059-35-9; S. 573 - 577.
  471. J. Machl, T. Wolbank, H. Hauser:
    "Prediction and measurements of a derivative current sensor response for voltage pulses applied to induction machines";
    Poster: Annual Conference on Magnetism & Magnetic Materials, Tampa, Florida, USA; 11.11.2002 - 15.11.2002; in: "47th Annual Conference on Magnetism & Magnetic Materials", (2002), S. 52.

    Zusätzliche Informationen
  472. J. Machl, T. Wolbank, H. Hauser:
    "Simulation and Measurement of an optimised current sensor for inverter fed ac machines";
    Poster: European Magnetic Sensor & Actuator Conference, Athens, Greece; 03.07.2002 - 05.07.2002; in: "Proceeding of European Magnetic Sensor & Actuator ", Book of Abstracts EMSA 2002, (2002), S. 1 - 4.

    Zusätzliche Informationen
  473. J. Machl, T. Wolbank, H. Hauser:
    "Spectral comparison of speed-sensorless control signals for ac machines derived from different sensors";
    Vortrag: International Conference on Advanced Engineering Design, Prague, Czech Republic; 01.06.2003 - 04.06.2003; in: "Proceedings of International Conference on Advanced Engineering Design", CD-ROM, (2003), ISBN: 80-86059-35-9.
  474. M. Lugbauer, A. Kröll, E. Badisch, F. Franek:
    "Anwendung und Verschleissverhalten Hartstoffverstärkter Schichten in Hochleistungs-Agrarmaschinen";
    Vortrag: ÖTG-Symposium 2005, Graz; 10.11.2005; in: "Tribosysteme in der Fahrzeugtechnik", Österreichische Tribiologische Gesellschaft, Wien (2005), ISBN: 3-901657-19-3; S. 179 - 188.
  475. S. Ligon, M. Kellner, P. Radovanovic, J. Matovic, R. Liska:
    "Photocurable Poly-AMPS-Based Proton Exchange Membranes For Fuel Cells";
    Vortrag: RadTech Europe 2013, Basel; 15.10.2013 - 17.10.2013; in: "Abstract Book", (2013), S. 88.
  476. M. Liedtke, G. Khatibi, B. Czerny, J. Nicolics:
    "Thermomechanical Reliability Investigation of Insulated Gate Bipolar Transistor Module";
    Vortrag: 41st International Spring Seminar on Electronics Technology (ISSE), Zlatibor; 16.05.2018 - 20.05.2018; in: "Book of Abstracts ISSE 2018", IEEE, (2018), ISBN: 978-1-5386-5731-7; S. 81 - 82.
  477. M. Leitgeb, Ch. Zellner, M. Schneider, U. Schmid:
    "Metal assisted Chemical Etching of Monocystalline Silicon Carbide";
    Poster: nanoFIS 2016 - 2nd International Conference on Functional integrated nano Systems, Graz; 27.06.2016 - 29.06.2016; in: "nanoFIS 2016 - 2nd International Conference on Functional integrated nano Systems", (2016).

    Zusätzliche Informationen
  478. M. Leitgeb, Ch. Zellner, M. Schneider, U. Schmid:
    "Porous Silicon Carbide for MEMS";
    Vortrag: Eurosensors 2017, Paris, Frankreich; 03.09.2017 - 06.09.2017; in: "Proceedings - Eurosensors 2017, Paris", MDPI, Vol. 1/ Iss. 4 (2017), ISSN: 2504-3900; S. 1 - 4.

    Zusätzliche Informationen
  479. M. Leitgeb, Ch. Zellner, M. Dorfmeister, M. Schneider, U. Schmid:
    "Buckling Porous SiC Membranes";
    Vortrag: Eurosensors 2018, Graz, Österreich; 09.09.2018 - 12.09.2018; in: "Proceedings - Eurosensors 2018, Graz", MDPI, (2018), ISSN: 2504-3900; S. 1 - 4.

    Zusätzliche Informationen
  480. S. Lee, S. Song, D. Jiles, H. Hauser:
    "Application of magneto-optic sensor for the evaluation of non-magnetic and non-conducting surfaces";
    Poster: 49th Annual Conference on Magnetism & Magnetic Materials (MMM 04), Jacksonville, Florida, USA; 07.11.2004 - 11.11.2004; in: "Book of Abstracts - MMM 04", (2004), S. FS-08.
  481. S. Lee, Y. Melikhov, D. Jiles, C. Park, H. Hauser:
    "Magneto-Optic Linear Displacement Sensor with High Spatial-Resolution and Low Noise";
    Poster: Annual Conference on Magnetism and Magnetic Materials, San Jose, CA, USA; 30.10.2006 - 03.11.2006; in: "Abstracts - 50 MMM 2005", (2006), S. 112.
  482. S. J. Lee, Y. Melikhov, Ch.-M. Park, H. Hauser, D. Jiles:
    "Magnetic Domain Wall Motion as a Basis for a New Type of Sensor";
    Poster: APS March Meeting, Baltimore, MD, USA; 13.03.2006 - 17.03.2006; in: "Bulletin of the American Physical Society", American Physical Society, Vol. 51, No. 1 (2006), S. 170.
  483. S. J. Lee, Y. Melikhov, C. Park, H. Hauser, D. Jiles:
    "Magnetic Domain Wall Motion for Sensor Application";
    Vortrag: Meeting of the American Physical Society, Baltimore, MD; 13.03.2006 - 17.03.2006; in: "Proceedings", (2006).
  484. S. Lee, S. Hoon, D. Jiles, H. Hauser:
    "AC Modulated Magneto-Optic Sensor for Remote Investigation of Surface Deformation";
    Poster: Review of Progress in Quantitative NDE, Mines Golden, Colorado, USA; 25.07.2004 - 30.07.2004; in: "Book of Abstracts - Quantitative NDE", (2004), S. NAG-1-02098.
  485. M. Lederer, B. Czerny, B. Nagl, A. Trnka, G. Khatibi, M. Thoben:
    "Simulation of stress concentrations in wire-bonds using a novel strain gradient theory";
    Poster: EuroSimE 2013 14th IEEE International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, Wroclaw, Poland; 15.04.2013 - 17.04.2013; in: "Conference Proceedings", (2013), ISBN: 978-1-4673-6137-8; S. 1 - 6.
  486. N. Lecic, M. Radovanovic, L. Zivanov, N. Adamovic, J. Matovic:
    "Electrical characterization of nanochannels using impedance spectroscopy";
    Vortrag: Second ReClMiCo Workshop: New Trends in Integrated Microsystems and Components, Novi Sad, Serbia; 05.03.2010 - 06.03.2010; in: "New Trends in Integrated Microsystems and Components", University of Novs Sad, Faculty of Technical Science, (2010), ISBN: 978-86-7892-287-9; S. 56 - 64.

    Zusätzliche Informationen
  487. St. Laumann, R. Jisa, G. Deinhofer, M. Jech, F. Franek:
    "Tribologische Eigenschaften von Messinglegierungen und deren Anwendung in Wälzlagerkäfigen";
    Vortrag: 54. Tribologie-Fachtagung, Götingen, D; 30.09.2013 - 02.10.2013; in: "54. Tribologie-Fachtagung", Gesellschaft für Tribologie e.V., Band II (2013), ISBN: 978-3-00-043026-8; S. 52/1 - 52/9.

    Zusätzliche Informationen
  488. G. Langer, M. Leitgeb, J. Nicolics, M. Unger, H. Hoschopf, F. Wenzl:
    "Advanced Thermal Management Solutions on PCBs for High Power Applications - Best Paper Award";
    Vortrag: Ipc Apex Expo 2014, Las Vegas, Nevada, USA; 25.03.2014 - 27.03.2014; in: "Proceedings", (2014), 15 S.
  489. M. Kucera, E Wistrela, F. Hofbauer, A. Bittner, U. Schmid:
    "Sensitivitätssteigerung von piezoelektrischen, resonant angetriebenen Mikrosensoren durch digitale Q-Faktorverstärkung";
    Vortrag: Mikrosystemtechnik Kongress 2013, Aachen, D; 14.10.2013 - 16.10.2013; in: "Proceedings MikroSystemTechnik Kongress 2013", VDE VERLAG GMBH, Berlin und Offenbach, Bismarckstraße 33, 10625 Berlin, (2013), ISBN: 978-3-8007-3555-6; S. 249 - 252.

    Zusätzliche Informationen
  490. M. Kucera, T. Manzaneque, J.L. Sànchez-Rojas, N. Dörr, A. Bittner, U. Schmid:
    "Q-factor amplification and parasitic effect compensation using a self-actuated piezoelectric AlN MEMS resonator for viscosity measurements";
    Vortrag: WTC 2013 - 5th World Tribology Congress, Turin, Italien; 08.09.2013 - 13.09.2013; in: "WTC 2013 - 5th World Tribology Congress", (2013), ISBN: 978-88-90818509.
  491. M. Kucera, T. Manzaneque, J.L. Sànchez-Rojas, A. Bittner, U. Schmid:
    "Lock-in Driven Quality Factor Enhancement with Parasitic Effect Compensation of a Self- Actuated Piezoelectric MEMS Cantilever";
    Vortrag: IEEE Ultrasonics Symposium, Dresden; 07.10.2012 - 10.10.2012; in: "Proceedings IEEE Ultrasonics Symposium", IEEE, (2012), ISBN: 978-3-99033-045-6.

    Zusätzliche Informationen
  492. M. Kucera, T. Manzaneque, J.L. Sànchez-Rojas, A. Bittner, U. Schmid:
    "Quality Factor Enhancement of a Self-Actuated Piezoelectric MEMS Cantilever using Lock-in Driven Feedback Loop";
    Poster: Mikroelektronik Tagung ME12, Wien; 23.04.2012 - 24.04.2012; in: "ME Tagung 2012", Schriftenreihe des Öst erreichischen Verbands für Elektrotechnik, (2012), ISBN: 978-3-85133-071-7; S. 166 - 171.

    Zusätzliche Informationen
  493. M. Kucera, F. Hofbauer, T. Manzaneque, V Ruiz-Díez, A. Bittner, J.L. Sànchez-Rojas, U. Schmid:
    "Quality Factor Enhancement for Resonant MEMS Applying an Analogue Feedback Circuit Driven by a Lock-in Amplifier";
    Vortrag: SPIE Microtechnologies 2013, Grenoble, France; 24.04.2013 - 26.04.2013; in: "Proceedings of SPIE", 8763 (2013), ISSN: 0277-786x.

    Zusätzliche Informationen
  494. P. Krivic, F. Wenzl, J. Nicolics:
    "Investigation of Thermal Properties of Power LED Illumination Assemblies";
    Poster: 35th International Spring Seminar on Electronics Technology (ISSE 2012), Bad Aussee; 09.05.2012 - 13.05.2012; in: "Book of Abstracts", (2012), ISBN: 978-3-85465-015-7; S. 36 - 37.
  495. P. Krivic, M. Weilguni, G. Radosavljevic:
    "Realization of Three-Dimensional Solenoidal Microcoils with Air Core in LTCC Technology";
    Vortrag: 36th International Spring Seminar on Electronics Technology - ISSE 2013, Alba Iulia, Romania; 08.05.2013 - 12.05.2013; in: "Book of Abstracts", (2013), ISBN: 978-606-613-064-6; S. 34 - 35.
  496. P. Krivic, G. Radosavljevic, S. Birgermajer, N. Cselyuszka, H. Arthaber:
    "Design and Fabrication of the Bosma Stripline Circulator in LTCC Technology";
    Vortrag: International Conference on Microwaves, Communications, Antennas and Electronic Systems (COMCAS 2015), Tel Aviv; 02.11.2015 - 04.11.2015; in: "Proceedings of the IEEE International Conference on Microwaves, Communications, Antennas and Electronic Systems (COMCAS 2015)", (2015), 5 S.
  497. P. Krivic, S. Birgermajer, N. Cselyuszka, M. Pieper:
    "Multilayered Spiral Coils with Air Core fabricated in LTCC technology";
    Vortrag: IMAPS Nordic Conference 2015, Helsingor, Denmark; 08.06.2015 - 09.06.2015; in: "Proceedings of IMAPS Nordic Conference 2015", (2015), 5 S.
  498. P. Krivic:
    "Three-Dimensional Quasi-Solenoidal Microcoils with an Air Core on the LTCC Substrate";
    Poster: European Microwave Conference 2013, Nuremberg, Germany; 08.10.2013 - 10.10.2013; in: "Conference Proceedings", (2013), S. 1 - 4.
  499. W. Kremser, J. Nicolics:
    "Aspects of Thermal Design Optimization for Power Hybrid Circuits";
    Vortrag: International Spring Seminar on Electronics Technology (ISSE), Göd, Hungary; 21.05.1996 - 25.05.1996; in: "Proceedings of the 1996 International Spring Seminar on Electronics Technology (ISSE 96)", (1996), S. 160 - 165.
  500. W. Kremser, J. Nicolics:
    "Thermal Aspects of Chip Bonding Techniques for Power Semiconductors";
    Vortrag: International Conference on Microelectronics (MIEL), Nova Gorica; 05.09.1996; in: "Proc. of 24th Int. Conf. on Microelectronics (MIEL 96)", (1996), S. 255 - 262.
  501. J. Kosel, H. Hauser, G. Pertl:
    "Stress dependence of the differential susceptibility of soft magnetic ribbon";
    Poster: 49th Annual Conference on Magnetism & Magnetic Materials (MMM 04), Jacksonville, Florida, USA; 07.11.2004 - 11.11.2004; in: "Book of Abstracts - MMM 04", (2004), S. DQ-11.
  502. R. Kolm, A.R. Baghai-Wadji:
    "On the Discretization of Fredholm Integral Equations of First Kind Using Compactly Supported Wavelets";
    Vortrag: Applied Computational Electromagnetics Society, Monterey, USA; 24.03.2003 - 28.03.2003; in: "Proceedings ACES", Applied Computational Electromagnetics Society Journal, (2003), ISSN: 1054-4887; S. 339 - 346.
  503. M. Kluge, M. Kiziroglou, E. Yeatman, U. Schmid, D. Schupke, Th. Becker:
    "Dynamic Thermoelectric Energy Harvesting in Aircraft";
    Poster: PSMA Inaugural International Energy Harvesting Workshop (EnerHarv 2018), Cork, Irland; 29.05.2018 - 31.05.2018; in: "PSMA Inaugural International Energy Harvesting Workshop (EnerHarv 2018)", (2018), S. 1.

    Zusätzliche Informationen
  504. S. Klein, S Thilmont, V. Ziegler, U. Prechtel, U. Schmid, H. Seidel:
    "High Temperature Stable Rf Mems Switch Based On Tungsten-Titanium";
    Vortrag: 15th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS 09), Denver, CO, USA; 21.06.2009 - 25.06.2009; in: "Proceedings of the 15th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS 09)", IEEE, (2009), ISBN: 978-1-4244-4193-8; S. 1409 - 1412.

    Zusätzliche Informationen
  505. S. Klein, C. Comtesse, A. Bittner, H. Seidel, V. Ziegler, U. Prechtel, U. Schmid:
    "RF MEMS Switches Based on an Alloy of Aluminum-Silicon-Copper";
    Vortrag: SPIE Europe: Microtechnologies for the New Millennium, Dresden, Deutschland; 04.05.2009 - 08.05.2009; in: "Proceedings of SPIE", Society of Photo-Optical Instrumentation Engineers (SPIE), 7362-7366 (2009), 8 S.

    Zusätzliche Informationen
  506. S. Klein, A. Bittner, U. Schmid, H. Seidel:
    "CMOS kompatible RF MEMS Schalter";
    Vortrag: Mikrosystemtechnik Kongress 2009, Berlin, D; 12.10.2009 - 14.10.2009; in: "Mikrosystemtechnik Kongress 2009 - Proceedings", VDE Verlag, (2009), ISBN: 978-3-8007-3183-1; Paper-Nr. 43, 4 S.

    Zusätzliche Informationen
  507. A. Klein, T. Frischmuth, M. Schneider, Th. Grille, U. Schmid:
    "Einfluss der Schichtdicke auf das mechanische Verhalten und die Bruchstabilität von a-SiC:H Membranen";
    Vortrag: MESS16 - Microelectronic Systems Symposium, Wien; 28.04.2016 - 29.04.2016; in: "OVE Schriftenreihe", Schriftenreihe OVE, 83 (2016), ISBN: 978-3-85133-089-2; S. 20.
  508. M. Kiziroglou, A. Elefsiniotis, N. Kokorakis, S. Wright, T. Toh, P. Mitcheson, U. Schmid, Th. Becker, E. Yeatman:
    "Scaling of dynamic thermoelectric harvesting devices in the 1-100 cm3 range";
    Vortrag: Smart Sensors, Actuators and MEMS VII - 2015, Barcelona, Spain; 04.05.2015 - 06.05.2015; in: "Proc. of SPIE Vol. 9517-9520", SPIE, 9517 (2015), ISSN: 0277-786x; Paper-Nr. 95172F, 8 S.

    Zusätzliche Informationen
  509. M. Kiziroglou, Th. Becker, E. Yeatman, U. Schmid, J. Evans:
    "Comparison of methods for static charge energy harvesting on aircraft";
    Vortrag: SPIE Microtechnologies 2017, Barcelnoa, Spanien; 08.05.2017 - 10.05.2017; in: "Proc. SPIE 10246, Smart Sensors, Actuators, and MEMS VIII", SPIE, (2017), ISSN: 1996-756x; Paper-Nr. 102460X, 6 S.

    Zusätzliche Informationen
  510. M. Kisic, N. V. Blaz, A. Maric, G. Radosavljevic, L. Zivanov, M. Damnjanovic:
    "Influence of Coil Design on Sensing Performance of Pressure Sensor with Polyimide Membrane";
    Vortrag: 37th International Spring Seminar on Electronics Technology, Dresden; 07.05.2014 - 11.05.2014; in: "Proceedings 37th Int. Spring Seminar on Electronics Technology", (2014), ISBN: 978-1-4799-4455-2; S. 192 - 193.
  511. M. Kisic, N. V. Blaz, B. Dakic, A. Maric, G. Radosavljevic, L. Zivanov, M. Damnjanovic:
    "A Flexible Polyimide Based Device for Displacement Sensing";
    Vortrag: International Conference on Microeletronics (MIEL 2014), Belgrade, Serbia; 12.05.2014 - 15.05.2014; in: "Proceedings", (2014), ISBN: 978-1-4799-5294-6; 4 S.
  512. M. Kisic, N. V. Blaz, K. Babkovic, A. Maric, G. Radosavljevic, L. Zivanov, M. Damnjanovic:
    "Passive Pressure Sensor with Ferrite Core on Polyimide Membrane";
    Poster: Soft Magnetic Materials Conference (SMM 21), Budapest, Hungary; 01.09.2013 - 04.09.2013; in: "Book of Abstracts", (2013), S. 1.
  513. M. Kisic, N. V. Blaz, K. Babkovic, A. Maric, G. Radosavljevic, L. Zivanov, M. Damnjanovic:
    "Passive Wireless Sensor for Force Measurements";
    Poster: 10th European Conference on Magnetic Sensors and Actuators (EMSA 2014), Vienna, Austria; 06.07.2014 - 09.07.2014; in: "Proceedings", (2014), S. 84.
  514. Ch. Kirsch, D. Feili, U. Schmid, A. Balck, M. Leester-Schaedel, S. Büttgenbach, H. Seidel:
    "Untersuchung des Bucklingeffektes an mittels gesputtertem Wolfram vorgespannten Siliziummembranen für Mikroaktorikanwendungen";
    Poster: Mikrosystemtechnik Kongress 2013, Aachen, D; 14.10.2013 - 16.10.2013; in: "Proceedings MikroSystemTechnik Kongress 2013", VDE VERLAG GMBH, Berlin und Offenbach, Bismarckstraße 33, 10625 Berlin, (2013), ISBN: 978-3-8007-3555-6; S. 492 - 495.

    Zusätzliche Informationen
  515. G. Khatibi, B. Czerny, J. Magnien, M. Lederer, E. Suhir, J. Nicolics:
    "Towards Adequate Qualification Testing of Electronic Products: Review and Extension";
    Vortrag: IEEE Conference Publications, Singapore (eingeladen); 03.12.2014 - 05.12.2014; in: "2014 IEEE 16th Electronics Packaging Technology Conference (EPTC 2014)", IEEE, (2014), S. 1 - 6.
  516. G. Khatibi, B. Czerny, A. Lassnig, M. Lederer, J. Magnien, J. Nicolics, E. Suhir:
    "A novel approach for evaluation of material interfaces in electronics";
    Hauptvortrag: 2016 IEEE Aerospace Conference, USA (eingeladen); 05.03.2016 - 12.03.2016; in: "IEEE Aerospace Conference Proceedings", IEEE, USA (2016), ISBN: 978-1-4673-7676-1; S. 1 - 11.
  517. F. Keplinger, S. Kvasnica, F. Kohl, H. Hauser:
    "Simulated and Measured Characterisitc of a Micromachined Cantilever Sensor";
    Poster: GMe Forum 2003, Wien, Ö (eingeladen); 10.04.2003 - 11.04.2003; in: "Proceedings of the Seminar GMe Forum 2003", K. Riedling (Hrg.); (2003), ISBN: 3-901578-10-2; S. 173 - 176.
  518. F. Keplinger, S. Kvasnica, H. Hauser:
    "Measuring High Magnetic Fields With A U-Shaped Micro Machined Cantilever Using an Optical Readout";
    Vortrag: INTERMAG 2003 (International Magnetics Conference Boston, March 30 - April 3), Boston, Massachusetts; 28.03.2003 - 03.04.2003; in: "INTERMAG 2003 Diges CD-ROM", (2003), 2 S.
  519. F. Keplinger, S. Kvasnica, H. Hauser:
    "Micro Machined Sensor for Measuring High Magnetic Fields";
    Vortrag: 16th European Conference on Solid-State Transducers (EUROSENSORS XVI), Prag; 15.09.2002 - 18.09.2002; in: "Eurosensors XVI", (2002), S. 1225 - 1228.
  520. F. Keplinger, H. Hauser, J. Nicolics, C. Hausleitner, R. Steindl:
    "Magnetic Field Sensor for Monitoring Tyre Wear";
    Vortrag: int. Workshop on Wear Sensing 2002, London (eingeladen); 05.12.2002; in: "Wear Sensing", (2002).
  521. F. Keplinger, R. Beigelbeck, H. Hauser:
    "Measurement of Two Orthogonal magnetic Flux Density Components with a Single Oscillating U-Shaped Micromachined Cantilever";
    Poster: 12th International Conference (Sensors 2005), Nuremberg, Germany; 10.05.2005 - 12.05.2005; in: "Proceedings Volume I - Sensor 2005", (2005), S. 131 - 135.
  522. P. Kelman, G. Zehethofer:
    "Metallographie und Rasterelektronenmikroskopie in der Tribologischen Schadensanalytik von Oberflächen";
    Vortrag: ÖTG-Symposium 2002, Wiener Neustadt; 29.11.2002; in: "Industrielle Tribologie", F. Franek, A. Pauschitz (Hrg.); Österreichische Tribologische Gesellschaft, Wien (2002), ISBN: 3-901657-11-8; S. 21 - 32.
  523. M. Kellner, Ph Radovanovic, J. Matovic, R. Liska:
    "Photopolymerisation of proton conducting biomimetic membranes";
    Poster: European Symposium of Photopolymer Science, Mulhouse, F; 28.11.2010 - 01.12.2010; in: "European Symposium of Photopolymer Science", (2010).
  524. M. Kellner, Ph Radovanovic, J. Matovic, R. Liska:
    "Photopolymerizable Monomer Formulations for Nanoporous Proton Conducting Membranes";
    Poster: 4M 2011 - 8th International Conference on Multi-Material Micro Manufacture, Stuttgart, D; 08.11.2011 - 10.11.2011; in: "4M 2011 - Proceedings of the 8th International Conference on Multi-Material Micro Manufacture", Research Publishing, (2011), ISBN: 978-981-07-0319-6; S. 242 - 244.

    Zusätzliche Informationen
  525. M. Kellner, P. Radovanovic, J. Matovic, R. Liska:
    "Novel crosslinkers for high performance poly-AMPS-based proton exchange membranes for fuel cells";
    Vortrag: European Symposium of Photopolymer Science - ESPS 2012, Torino; 04.09.2012 - 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts", (2012).
  526. M. Kellner, P. Radovanovic, J. Matovic, R. Liska:
    "Photopolymerization of crosslinked proton conducting membranes";
    Poster: RadTech Europe 2011, Basel, CH; 18.10.2011 - 20.10.2011; in: "RadTech Europe 2011 - Abstract Book", (2011), S. 123.
  527. M. Kellner, P. Radovanovic, J. Matovic, R. Liska:
    "Proton conducting biomimetic membranes based on sulfonic polymeres";
    Poster: 10th Austrian Polymer Meeting and 2nd Joint Austrian-Slovenian Polymer Meeting 2010, Leoben; 08.09.2010 - 10.09.2010; in: "Book of Abstracts", (2010), S. 120 - 121.
  528. M. Kellner, P. Radovanovic, J. Matovic, R. Liska:
    "Proton conducting fluorinated polymer nanomembrane for fuel cell applications";
    Poster: European Symposium of Photopolymer Science - ESPS 2012, Torino; 04.09.2012 - 07.09.2012; in: "European Symposium of Photopolymer Science - Book of Abstracts", (2012), S. 21.
  529. M. Kellner, P. Radovanovic, J. Matovic, R. Liska:
    "Proton conducting membranes based on photopolymerizable monomers";
    Poster: ICOM 2011 - International Congress on Membranes and Membrane Processes, Amsterdam, Niederlande; 23.07.2011 - 29.07.2011; in: "ICOM 2011", (2011), S. 667.
  530. M. Kellner, P. Radovanovic, R. Liska, J. Matovic:
    "Novel Crosslinker for Photopolymerization of Proton Conducting Fuel Cell Membranes";
    Vortrag: 9th International Conference on Multi-Material Micro Manufacture - 4M 2012, Wien; 09.10.2012 - 11.10.2012; in: "Proceedings of the 9th International Conference on Multi-Material Micro Manufacture", (2012), ISBN: 978-981-07-3353-7; S. 148.
  531. M. Kellner, F. Radovanovic, J. Matovic, R. Liska:
    "High Performance Proton Conducting Membranes for Fuel Cells made by Photopolymerization of Hydrolytically Stable Monomers";
    Vortrag: Physical Chemistry 2012, Belgrade, Serbia; 24.09.2012 - 28.09.2012; in: "Proceedings", (2012), S. 492 - 494.
  532. C. Kajdas, A. Pauschitz, F. Franek:
    "Tribological Investigation of Biologically Friendly Lubricants-Part 2";
    Vortrag: ÖTG-Symposium 2002, Wiener Neustadt; 29.11.2002; in: "Industrielle Tribologie", F. Franek, A. Pauschitz (Hrg.); Österreichische Tribologische Gesellschaft, Wien (2002), ISBN: 3-901657-11-8; S. 99 - 104.
  533. L. Juhas, A. Vujanic, N. Delic-Adamovic, L. Nagy, B. Borovac:
    "Development of Platform for Micro-Positioning Actuated by Piezo-Legs";
    Vortrag: ICRA 2000, San Francisco, California; 22.04.2000 - 28.04.2000; in: "Proc. IEEE International Conference on Robotics and Automation", (2000), S. 3647 - 3653.
  534. K. Judmann, G. Reinisch, J. Schörg, I. Steffan:
    "Tribologic Aspects of Third Body Wear in Metal-on-Metal Total Hip Replacements";
    Vortrag: 4th Combined Meeting, Rodes, Greece; 01.06.2001 - 03.06.2001; in: "Orthopaedic Research Societies of the USA, Canada, Europe and Japan", (2001), S. 128.
  535. K. Judmann, G. Reinisch, A. Pauschitz, F. Bauer:
    "Wear testing of total hip joints according to ISO and development of a new hip joint simulator according to ISO";
    Vortrag: 2nd World Tribology Congress, Wien; 03.09.2001 - 07.09.2001; in: "Abstracts of Papers of 2nd World Tribology Congress 2001", F. Franek, W.J. Bartz, A. Pauschitz et al. (Hrg.); Österreichische Tribologische Gesellschaft, Abstracts of Papers (2001), ISBN: 3-901657-08-8; S. 745.

    Zusätzliche Informationen
  536. R. Jisa, A. Ristic, F. Franek, C. Eisenmenger-Stittner:
    "Interactions of lubricant additives with sliding surfaces based on copper alloys";
    Vortrag: Nordtrib 2008 - 13th Nordic Symposium on Tribology, Tampere; 10.06.2008 - 13.06.2008; in: "Abstracts", (2008), ISBN: 978-952-15-1961-1; S. 40.
  537. R. Jisa, A. Ristic, J. Brenner, Th. Lebersorger, S. Ilo, H. Neumayer, F. Franek:
    "Effectiveness Of Lubricant Additives For Copper-Alloy-Steel Sliding Contacts";
    Vortrag: ECOTRIB 2009 - 2nd European Conference on Tribology, Pisa, I; 07.06.2009 - 10.06.2009; in: "ECOTRIB '09 - 2nd European Conference on Tribology", University of Pisa, (2009), ISBN: 978-884672426-7; S. 941 - 946.

    Zusätzliche Informationen
  538. R. Jisa, St. Laumann, U. Cihak-Bayr, R. Eberle, M. Keppeler, U. Hofmann, F. Franek:
    "Tribologische Eigenschaften von MIM-gefertigten Kupferlegierungen";
    Vortrag: 54. Tribologie-Fachtagung, Götingen, D; 30.09.2013 - 02.10.2013; in: "54. Tribologie-Fachtagung", Gesellschaft für Tribologie e.V., Band II (2013), ISBN: 978-3-00-043026-8; S. 53/1 - 53/11.

    Zusätzliche Informationen
  539. R. Jisa, C. Eisenmenger-Stittner, Ch. Monetti, F. Franek:
    "Untersuchungen zum Verschleiß und Schmierungsprozess von selbstschmierenden Gleitelementen";
    Vortrag: ÖTG-Symposium 2006, Steyr; 23.11.2006; in: "Zukunftstrends tribologischer Komponenten in der Antriebstechnik", ÖTG, (2006), ISBN: 978-3-901657-23-8; S. 79 - 88.

    Zusätzliche Informationen
  540. D. Jiles, H. Hauser:
    "Hysteresis Measurement and Modeling of Thin Permalloy with Uniaxial Anisotropy";
    Poster: 6th Int. Workshop on 1&2 - Dimensional Magnetic Measurement and Testing, Bad Gastein, Ö; 20.09.2000 - 21.09.2000; in: "Abstracts of the 6th Intern. Workshop on 2-D M", (2000), ISBN: 3-902105-00-3; S. G-4.
  541. M. Jech, T. Wopelka, A. Pauschitz, F. Franek:
    "Performance of bio-based lubricants investigated at nanoscale by means of nVCT";
    Vortrag: 16th International Colloquium Tribology, Ostfildern, Deutschland; 15.01.2008 - 17.01.2008; in: "Proceedings", TAE, (2008), ISBN: 3-924813-73-6; S. 7.

    Zusätzliche Informationen
  542. M. Jech, T. Wopelka, F. Franek:
    "Lubricant peformance characterisation using nanoscale wear volume analysis by coherence technology";
    Vortrag: ECOTRIB 2007, Ljubljana, Slovenia (eingeladen); 12.06.2007 - 15.06.2007; in: "ECOTRIB '07", Slovenian Society for Tribology, Volume I (2007), ISBN: 978-961-90254-8-2; S. 319 - 327.

    Zusätzliche Informationen
  543. M. Jech, T. Wopelka, F. Franek:
    "Nvct - Wear Measurement At Nanometer Scale";
    Vortrag: 3rd Vienna International Conference on NANO-TECHNOLOGY - VIENNANO´09, Wien; 18.03.2009 - 20.03.2009; in: "3rd Vienna International Conference on NANO-TECHNOLOGY - VIENNANO´09", Österreichische Tribologische Gesellschaft, (2009), ISBN: 978-3-901657-32-0; S. 115 - 119.

    Zusätzliche Informationen
  544. M. Jech, T. Wopelka, J. Eder, F. Franek:
    "Progress and resolution of modern wear measurement systems";
    Vortrag: ÖTG-Symposium 2007, St. Pölten; 22.11.2007; in: "RELIABILITY ENGINEERING - Simulation und Monitoring von verschleißgefährdeten Systemen", (2007), ISBN: 978-3-901657-28-3; S. 81 - 92.

    Zusätzliche Informationen
  545. M. Jech, C. Tomastik, A. Vernes, A. Pauschitz, F. Franek:
    "Analyses And Quantification Of Friction And Wear Processes On The Nanometer Scale";
    Vortrag: ECOTRIB 2011 - 3rd European Conference on Tribology, Wien; 07.06.2011 - 09.06.2011; in: "ECOTRIB '11 - 3rd European Conference on Tribology", OeTG - Österreichische Tribologische Gesellschaft, (2011), ISBN: 978-3-901657-38-2; S. 801 - 804.

    Zusätzliche Informationen
  546. M. Jech, C. Lenauer, F. Novotny-Farkas, T. Wopelka, F. Ditroi, B. Geringer, F. Franek:
    "Wear Measurement with Radioactive Isotopes in Component and Engine Bench Test - Impact of Fuel and Bio-Fuel on Lubricating";
    Vortrag: FISITA 2010 World Automotive Congress, Budapest (eingeladen); 30.05.2010 - 04.06.2010; in: "FISITA 2010 World Automotive Congress", J. Takács (Hrg.); OOK Press Printing House, Veszprém, Hungary, (2010), ISBN: 978-963-9058-28-6; Paper-Nr. F2010-C-223, 7 S.

    Zusätzliche Informationen
  547. M. Jech, C. Lenauer, F. Novotny-Farkas, T. Feitzinger, F. Franek:
    "Advances in wear measurement - piston rings in component test and engine envirement";
    Hauptvortrag: 17th International Colloquium Tribology, Ostfildern, Deutschland; 19.01.2010 - 21.01.2010; in: "Solving Friction and Wear Problems", TAE, (2010), ISBN: 3-924813-80-9.

    Zusätzliche Informationen
  548. M. Jech, Th. Lebersorger, F. Franek:
    "Einfluss der Neigung der tribologischen Kontaktfläche auf die Schmierstoffverfügbarkeit bei SRV-Tests";
    Vortrag: 15th international colloquium tribology "Automotive and Industrial Lubrication", Ostfildern, Germany; 17.01.2006 - 19.01.2006; in: "15th international colloquium tribology - Automotive and Industrial Lubrication - Book of Synopses 2006", TAE, (2006), ISBN: 3-924813-62-0.

    Zusätzliche Informationen
  549. M. Jech, F. Franek, T. Wopelka, N. Dörr, A. Pauschitz:
    "Nachweis des Alterungseinflusses auf die Schmierfähigkeit von Motorenölen mit hochauflösender Verschleißmengenmessung (nVCT-Methode)";
    Vortrag: 48. Tribologie-Fachtagung - GfT, Göttingen, Deutschland; 24.09.2007 - 26.09.2007; in: "Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen - Band 2", Gesellschaft für Tribologie e.V., (2007), ISBN: 978-3-00-022603-8.

    Zusätzliche Informationen
  550. M. Jandak, T. Neuzil, M. Schneider, U. Schmid:
    "Investigation on different damping mechanisms on the Q factor of MEMS resonators";
    Vortrag: 30th Eurosensors Conference, EUROSENSORS 2016, Budapest, Hungary; 04.09.2016 - 07.09.2016; in: "Proceedings of the Eurosensors XXX", Procedia Engineering / Elsevier, 168 (2016), ISSN: 1877-7058; S. 929 - 932.

    Zusätzliche Informationen
  551. Z. Jaksic, J. Matovic:
    "Coupling Between Propagating And Evanescent Modes In Freestanding Nanomembrane-Based Plasmon Sensors Using Surface Sculpting";
    Vortrag: 3rd Vienna International Conference on NANO-TECHNOLOGY - VIENNANO´09, Wien; 18.03.2009 - 20.03.2009; in: "3rd Vienna International Conference on NANO-TECHNOLOGY - VIENNANO´09", Österreichische Tribologische Gesellschaft, (2009), ISBN: 978-3-901657-32-0; S. 187 - 194.
  552. Z. Jaksic, O. Jaksic, A. Vujanic, Z. Djuric, R. Petrovic, D. Randjelovic:
    "A Consideration of Fabrication-Induced Imperfections in Photonic Crystals for Optical Frequencies";
    Vortrag: International Conference on Microelectronics (MIEL), Nis, Yugoslavia; 12.05.2002 - 15.05.2002; in: "23rd International Conference on Microelectronics", Eigenverlag, Vol. 1 (2002), ISBN: 0-7803-7235-2; S. 293 - 296.
  553. Z. Jaksic, J. Buha, J. Matovic:
    "Transparent Conductive Oxide Nanoparticle Functionalization for Surface Plasmon Resonance Sensors";
    Poster: 3rd Conference Nanosensors for Industrial Applications - NANOSENS 2010, Vienna; 02.12.2010 - 03.12.2010; in: "Proceedings of the NANOSENS 2010", (2010).
  554. O. Jaksic, Z. Jaksic, J. Matovic:
    "Adsorption-Desorption Noise in Plasmonic Chemical/Biological Sensors in Multiple Analyte Environment";
    Vortrag: SPIE Europe: Microtechnologies for the New Millennium, Dresden, Deutschland; 04.05.2009 - 08.05.2009; in: "Proceedings of SPIE", Society of Photo-Optical Instrumentation Engineers (SPIE), 7362 (2009).

    Zusätzliche Informationen
  555. M. Jakovljevic, D. Petrovic, W. Brenner, G. Popovic, E. Chatzitheodoridis, A. Vujanic, R. Martins, E. Fortunato:
    "Low-cost Visual Control for Handling and Assembly of Microsystems";
    Vortrag: 5th International Conference On Advanced Manufacturing Systems, Udine, Udine, Italy; 03.06.1999 - 04.06.1999; in: "Proc. of 5th International Conference On Advanced Manufacturing Systems, Udine", (1999), S. 729 - 736.
  556. K. Ivanova, T. Ivanov, A. Badar, B. Volland, I. Rangelov, D. Andrijasevic, F. Sümecz, St. Fischer, M. Spitzbart, W. Brenner:
    "Thermally Driven Microgripper as a Tool for Micro-assembly";
    Poster: MNE2005 - 31st International Conference on Micro- and Nano-Engineering 2005, Wien; 19.09.2005 - 22.09.2005; in: "MNE2005 - 31st Interantional Conference on Micro- and Nano-Engineering 2005 - Abstracts", B. Volland (Hrg.); (2005).

    Zusätzliche Informationen
  557. Z. Illyefalvi-Vitez, Z. Drozd, L. Golonka, A. Kikineshy, M. Kosek, P. Mach, J. Nicolics, W. Sauer, E. Shoikova, P. Svasta:
    "International Local Network of Electronics Packaging Education";
    Vortrag: International Spring Seminar on Electronics Technology (ISSE), Balatonfüred, Hungary; 06.05.2000 - 10.05.2000; in: "Proceedings", (2000), S. 171 - 179.
  558. S. Ilincic, F. Franek:
    "Novel scheme to simulate friction between rough surfaces";
    Poster: Junior Scientist Conference 2010 (JSC 2010), Wien; 07.04.2010 - 09.04.2010; in: "Proceedings of the Junior Scientist Conference 2010", (2010), ISBN: 978-3-200-01797-9; S. 89 - 90.

    Zusätzliche Informationen
  559. I. Ignat, B. Schuster, J. Hafner, M. Kwon, D. Platz, U. Schmid:
    "Mechanical cooling of AFM cantilevers";
    Vortrag: Mikrosystemtechnik-Kongress 2021, Ludwigsburg, Deutschland; 08.11.2021 - 10.11.2021; in: "Mikrosystemtechnik-Kongress 2021", VDE-Verlag, (2021), ISBN: 978-3-8007-5656-8; Paper-Nr. D3.2, 4 S.

    Zusätzliche Informationen
  560. A. Iavorschi, N. Zoric, M. Sireteanu, S. Toskov, V. Grade Tavares, H. Mendonca, G. Radosavljevic:
    "Read-out Circuit for Inter-Digital Capacitive Sensor Realized in LTCC Technology";
    Poster: 37th International Microelectronics and Packaging IMAPS-CPMT Poland Conference, Krakow, Poland; 22.09.2013 - 25.09.2013; in: "Conference Proceedings", (2013), S. 1 - 5.
  561. J. Iannacci, G. Sordo, E. Serra, M. Kucera, U. Schmid:
    "Experimental Verification of a Novel MEMS Multi-Modal Vibration Energy Harvester for Ultra-Low Power Remote Sensing Nodes";
    Vortrag: Smart Sensors, Actuators and MEMS VII 2015, Barcelona, Spain; 04.05.2015 - 06.05.2015; in: "Proc. of SPIE Vol. 9517-9520", SPIE, 9517 (2015), ISSN: 0277-786x; Paper-Nr. 95171T, 10 S.

    Zusätzliche Informationen
  562. J. Iannacci, G. Sordo, M. Schneider, U. Schmid, A. Camarda, A. Romani:
    "A Novel Toggle-Type MEMS Vibration Energy Harvester for Internet of Things Applications";
    Poster: Sensors 2016, Orlando, Florida, USA; 30.10.2016 - 02.11.2016; in: "Proceedings of the IEEE Sensors 2016", IEEE, (2016), ISBN: 978-1-4799-8287-5; 3 S.

    Zusätzliche Informationen
  563. J. Iannacci, E. Serra, G. Sordo, M. Bonaldi, A. Borielli, U. Schmid, A. Bittner, M. Schneider, T. Kuenzig, G. Schrag, G. Pandraud, P. Sarro:
    "MEMS Based Multi Modal Vibration Energy Harvesters for Ultra Low Power Autonomous Remote and Distributed Sensing";
    Vortrag: Mechatronics 2014, Karlstad, Sweden; 16.06.2014 - 18.06.2014; in: "Proceedings of the 14th Mechatronics Forum International Conference", (2014), S. 1 - 8.

    Zusätzliche Informationen
  564. J. Iannacci, U. Schmid:
    "A Novel MEMS-Based Piezoelectric Multi-Modal Vibration Energy Harvester Concept to Power Autonomous Remote Sensing Nodes for Internet of Things (IoT) Applications";
    Vortrag: IEEE Sensors 2015, Valencia, Spanien; 01.11.2015 - 04.11.2015; in: "IEEE Sensors 2015", IEEE, (2015), ISBN: 978-1-4799-8203-5.

    Zusätzliche Informationen
  565. B. Hussain, I. Kianpour, V. Grade Tavares, H. Mendonca, G. Miskovic, G. Radosavljevic, V. Petrovic:
    "Design Considerations for LTCC based UWB Antennas for Space Applications";
    Vortrag: IEEE International Conference on Wireless for Space and Extreme Environments, Noordwijk, Netherlands; 30.10.2014 - 31.10.2014; in: "Proceedings", (2014), 5 S.
  566. K. Humer, H. W. Weber, N. Hastik, H. Hauser, H. Gerstenberg:
    "Dielectric Properties of the ITER TFMC Insulation after Low Temperature Reactor Irradiation";
    Vortrag: 18th Fusion Energy Conference (IAEA-CN-77), Sorrento, Italy; 04.10.2000 - 10.10.2000; in: "Proceedings of the IAEA 2001", (2000), S. 1 - 6.
  567. K. Humer, H. W. Weber, N. Hastik, H. Hauser, H. Gerstenberg:
    "Dielectric Strength and Breadown Voltage of the Iter Toroidal Field Model Coil Insulation after Low Temperature Reactor Irradiation";
    Vortrag: ICMC 2000, Intern. Cryogenic Materials Conference, Rio de Janeiro, Brasil; 11.06.2000 - 15.06.2000; in: "Proceedings", (2000), S. 1.
  568. M. Huber, F. Lintner, G. Reinisch:
    "Bacterial Adhesion to Femoral Ballhead Surfaces of Artificial Hipjointsin vitro - A Possible Reason for Late Infection and/or Corrosion?";
    Vortrag: 7th International BIOLOX Symposium, Stuttgart; 15.03.2002 - 16.03.2002; in: "Bioceramics in Joint Arthroplasty", J. Garino, G. Willmann (Hrg.); Georg Thieme Verlag, Stuttgart (2002), ISBN: 3-13-132651-4; S. 116 - 118.
  569. M. Hrovat, W. Smetana, D. Belavic, H. Homolka, R. Reicher, M. Santo Zarnik:
    "An Investigation of Thick-Film Materials on Steel Substrates for Possible Sensor Applications";
    Vortrag: 25th Intern. Conference IMAPS 2001, Rzeszow, Poland; 26.09.2001 - 29.09.2001; in: "Proceedings IMAPS 2001", (2001), ISBN: 83-904462-6-x; S. 199 - 202.
  570. M. Hrovat, D. Belavic, W. Smetana, H. Homolka, R. Reicher, M. Santo Zarnik:
    "Thick Film Resistors on Steel Substrates";
    Vortrag: 37th Intern. Conference on Microelectronics, Devices and Materials, Bohinj, Slovenia; 10.10.2001 - 12.10.2001; in: "Proceedings MIDEM 2001", (2001), ISBN: 961-90001-9-6; S. 249 - 254.
  571. M. Hrovat, D. Belavic, W. Smetana, H. Homolka, R. Reicher, A. Bencan, M. Santo Zarnik:
    "The Characterisation of Thick-Film Resistors on Different Substrates";
    Vortrag: European Microelectronics Packagings & Interconnection Symposium (IMAPS 2002), Cracow, Poland; 16.06.2002 - 18.06.2002; in: "Proceedings IMAPS 2002", (2002), ISBN: 83-904462-8-6; S. 415 - 418.
  572. E. Hristoforou, H. Hauser, A. Ktena:
    "Energetic Modeling of Magnetostrictive Delay Lines";
    Poster: International Conference on Magnetism, Roma, Italy; 27.07.2003 - 01.08.2003; in: "ICM 2003 Abstracts", (2003), S. 599.
  573. E. Hristoforou, H. Hauser, D. Kepaptsoglou:
    "Magnetostrictive Acoustic Delay Line Characterization";
    Poster: Joint European Magnetic Symposia JEMS, Grenoble, Frankreich; 28.08.2001 - 01.09.2001; in: "JEMS'01 Abstracts", (2001), S. 96.
  574. E. Hristoforou, H. Hauser, P. Dimitropoulos:
    "Smart Multipurpose Sensor Based on Magnetic Effects";
    Vortrag: 3rd IEEE Conference on Sensors (IEEE Sensors 2004), Vienna, Austria; 24.10.2004 - 27.10.2004; in: "CD-ROM Proceedings Sensor 2004", D. Rocha Wiese Meneses, P. M. Sarro, M. Vellekoop (Hrg.); (2004), ISBN: 0-7803-8692-2; S. 1036 - 1039.
  575. E. Hristoforou, H. Hauser:
    "Automated Standardisation Instrument for Magnetostrictive Characterizations";
    Poster: 6th Int. Workshop on 1- & 2-Dimensional Magnetic Measurement and Testing, Bad Gastein, Ö; 20.09.2000 - 21.09.2000; in: "Abstracts of the 6th Intern. Workshop on 2-D M", (2000), ISBN: 3-902105-00-3; S. D-11.
  576. E. Hristoforou, H. Hauser:
    "Automated Working Standard for the Characeterization of Magnetostrictive Delay Lines";
    Vortrag: 2DM 1&2 Dimensional Magnetic Measurement and Testing, Bad Gastein; 20.09.2006 - 21.09.2006; in: "Proceedings 2-D M", (2006), ISBN: 3-902105-00-3; S. 131 - 137.
  577. R. Hrdy, J. Prasek, P. Fillner, S. Vancik, J. Hubalek, U. Schmid:
    "Development of HfO2/Al2O3 Stack for On-Chip Capacitor Applications";
    Vortrag: 42nd International Spring Seminar on Electronics Technology - ISSE2019, Wroclaw, Polen; 15.05.2019 - 19.05.2019; in: "42nd International Spring Seminar on Electronics Technology", (2019), ISBN: 978-83-7493-070-3; S. 183 - 184.

    Zusätzliche Informationen
  578. H. Hötzendorfer, I. Giouroudi, S. Bou, M. Ferros:
    "Evaluation of Different Control Algorithms for Micromanipulation Systems";
    Vortrag: ENMA 2006 - International Conference on Engineering and Mathematics, Bilbao, Spain; 10.07.2006 - 11.07.2006; in: "2006 International Conference on Engineering and Mathematics", J. Bilbao, A. Olozaga, Y. Ruiz, C. Cabredo (Hrg.); Publicaciones - Escuela Tecnica Superior de Ingeneria, Bilbao, Spain (2006), ISBN: 84-95809-26-5; S. 287 - 294.
  579. H Hötzendorfer, I. Giouroudi:
    "Micromanipulation System with Stereoscopic Imaging";
    Vortrag: 12th IASTED Conference on Robotics and Applications, Honolulu, Hawai, USA; 14.08.2006 - 16.08.2006; in: "Proceedings of the 12th IASTED International Conference ROBOTICS AND APPLICATIONS", (2006), ISBN: 0-88986-597-3; S. 169 - 173.

    Zusätzliche Informationen
  580. H. Hochstöger, W. Smetana, H. Homolka:
    "Characterization of a Piezoresistive Torque Sensor Built Up in Thick Film Technology";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Wr. Neustadt, Austria; 19.05.2005 - 22.05.2005; in: "Book of Abstracts", (2005), ISBN: 3-85133-036-6; S. 168 - 169.
  581. H. Hochstöger, W. Smetana, H. Homolka:
    "Piezoresistive Torque Sensor Realized in Thick Film on Tube Technology";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Wr. Neustadt, Austria; 19.05.2005 - 22.05.2005; in: "Proceedings of 28th ISSE 2005", (2005), ISBN: 0-7803-9324-4; S. 377 - 381.
  582. H.T. Hoang, M. David, D. Disnan, I. Doganlar, H. Detz, U. Schmid, G. Strasser, B. Hinkov:
    "Modelling, fabrication and characterization of low-density polyethylene based plasmonic waveguides for mid-IR photonic networks";
    Poster: Gemainsame Jahrestagung der ÖPG und SPS 2021, Innsbruck; 30.08.2021 - 03.09.2021; in: "Gemeinsame Jahrestagung in Innsbruck", (2021), S. 55.
  583. F. Himmelstoß, P. Wurm, H. Hauser:
    "Energetic Model of Ferromagnetic Hysteresis Applied to a ZETA Converter";
    Poster: 11th Intern. Symposium on Theoretical Electrical Engineering, Linz, Austria; 19.08.2001 - 22.08.2001; in: "Proceedings ISTET '01", K. Schlacher, R. Weigel, A. Kugi (Hrg.); Springer, Vol. 1 (2) (2001), S. 210 - 213.
  584. F. Himmelstoß, P. Wurm, H. Hauser:
    "Magnetic Measurement and Modelling of a DC-DC Converter Start-Up";
    Vortrag: Magnetic Measurements 2000, Prag, Tschechien; 11.09.2000 - 12.09.2000; in: "Proceedings", (2000), S. 9 - 11.

    Zusätzliche Informationen
  585. F. Himmelstoß, P. H. Wurm, H. Hauser:
    "Application of the Energetic Model of Ferromagnetic Hysteresis to Bidirectional DC-to-DC Converters with High Input to Output Voltage Ratio";
    Vortrag: 6th European Space Power Conference, Porto, Portugal; 06.05.2002 - 10.05.2002; in: "Proceedings of the Sixth European Space Power Conference", ESA SP-502 (2002), S. 235 - 240.
  586. F. Himmelstoß, H. Hauser, P. Wurm:
    "Modelling of the Ferromagnetic Hysteresis for a Zero-Voltage-Switching Half-Bridge Bidirectional Step-Up DC-To-DC Converter";
    Poster: 47th Annual Conference on Magnetism & Magnetic Materials, Tampa, Florida, USA; 11.11.2002 - 15.11.2002; in: "Abstracts MMM 02", (2002), S. 447.
  587. J. Hernando-Garcia, J.L. Sànchez-Rojas, A. Ababneh, H. Seidel, Ü. Sökmen, E. Peiner, U. Schmid:
    "Characterization and simulation of high quality AlN-actuated resonant suspended beams";
    Vortrag: SPIE Europe: Microtechnologies for the New Millennium, Dresden, Deutschland; 04.05.2009 - 08.05.2009; in: "Proceedings of SPIE", Society of Photo-Optical Instrumentation Engineers (SPIE), 7362-7366 (2009), 9 S.

    Zusätzliche Informationen
  588. R. Hauser, R. Fachberger, G. Bruckner, W. Smetana, R. Reicher, A. Stelzer, S. Scheiblhofer:
    "A wireless SAW-based temperature sensor for harsh environment";
    Vortrag: 3rd IEEE Conference on Sensors (IEEE Sensors 2004), Vienna, Austria; 24.10.2004 - 27.10.2004; in: "CD-ROM Proceedings Sensor 2004", D. Rocha Wiese Meneses, P. Sarro, M. Vellekoop (Hrg.); (2004), ISBN: 0-7803-8692-2; S. 860 - 863.
  589. R. Hauser, R. Fachberger, G. Bruckner, R. Reicher, W. Smetana:
    "Ceramic Patch Antenna for High Temperature Applications";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Wr. Neustadt, Austria; 19.05.2005 - 22.05.2005; in: "Proceedings of 28th ISSE 2005", (2005), ISBN: 0-7803-9324-4; S. 159 - 164.
  590. H. Hauser, N. Wang, T. O`Donnell:
    "Efficiency prediction of high frequency micro-transformers";
    Poster: 9th Joint MMM / INTERMAG Conference, Anaheim, CA; 05.01.2004 - 09.01.2004; in: "Book of Abstracts", (2004), S. 50.
  591. H. Hauser, J. Steurer, M. Mündlein, I. Giouroudi, L. Musiejovsky, J. Zehetner, J. Nicolics:
    "Laser Welding of GMI-Wire for Magnetic Field Sensors";
    Vortrag: Informationstagung Mikroelektronik (ME), Wien; 11.10.2006 - 12.10.2006; in: "Tagungsband Informationstagung Mikroelektronik 06", (2006), ISBN: 3-85133-040-4; S. 86 - 92.
  592. H. Hauser, G. Stangl, M. Janiba, I. Giouroudi:
    "Measurements and Layout of Sensitive AMR Sensors";
    Poster: Magnetic Measurements '06, Zavazna Poruba, Slovakia; 21.09.2006 - 23.09.2006; in: "Magnetic Measurements '06 - The Book of Abstracts", Slovak University of Technology, (2006), ISBN: 80-227-2452-1; S. 11 - 12.
  593. H. Hauser, G. Stangl, J. Hochreiter, R. Chabicovsky, K. Riedling:
    "Technologische Aspekte und Layout von AMR-Sensoren hoher Empfindlichkeit";
    Vortrag: Symposium "Magnetoresistive Sensoren VI: Grundlagen - Herstellung - Anwendung", Wetzlar; 13.03.2001 - 14.03.2001; in: "Tagungsband des Symposiums Magnetoresitive Sensoren VI: Grundlagen - Herstellung - Anwendung", (2001), S. 6.1.01 - 6.1.10.
  594. H. Hauser, G. Stangl, J. Hochreiter, R. Chabicovsky, W. Fallmann, K. Riedling:
    "Field Sensor by Anisotropic Magnetoresistance";
    Poster: 14th International Conference on Soft Magnetic Materials (SMM14), Balatonfüred, Hungary; 08.09.1999 - 10.09.1999; in: "SMM14 Abstracts", (1999), S. 182.
  595. H. Hauser, G. Stangl, W. Fallmann, R. Chabicovsky, K. Riedling:
    "Magnetoresistive Sensors";
    Vortrag: Workshop "Preparation, Properties, and Application of Thin Ferromagnetic Films", Wien; 15.06.2000 - 16.06.2000; in: "Proceedings of the Workshop `Preparation, Properties, and Application of Thin Ferromagnetic Films´", K. Riedling (Hrg.); Institut für Industrielle Elektronik und Materialwissenschaften, TU Wien (2000), ISBN: 3-85465-007-8; S. 15 - 27.
  596. H. Hauser, G. Stangl:
    "High Performance Permalloy Films for Sensitive Magnetoresistive Sensors";
    Poster: 2nd European Conference on Magnetic Sensors & Actuators, Sheffield, Great Britain; 13.07.1998 - 15.07.1998; in: "EMSA 98 - Abstracts", (1998), S. 41.
  597. H. Hauser, M. Rührig, J. Wecker:
    "Magnetic Hysteresis Modeling of TMR Strain Sensors";
    Poster: 9th Joint MMM / INTERMAG Conference, Anaheim, CA; 05.01.2004 - 09.01.2004; in: "Book of Abstracts", (2004), S. 336.
  598. H. Hauser, G.A. Reider, H. Wolfmayr:
    "New fast latching type optical switch";
    Vortrag: 9th Joint MMM / INTERMAG Conference, Anaheim, CA; 05.01.2004 - 09.01.2004; in: "Book of Abstracts", (2004), S. 376.
  599. H. Hauser, G. Pertl, J. Tellez-Blanco:
    "Measurement of the Differential Susceptibility of Soft Magnetic Ribbons Under Applied Tensile and Compressive Stress";
    Poster: 5th European Magnetic Sensors and Actuators (EMSA 2004), Cardiff, UK; 04.07.2004 - 07.07.2004; in: "Book of Abstracts - EMSA 2004", (2004), S. T-P.8.
  600. H. Hauser, J. Nicolics, R. Steindl, A. Pohl, C. Hausleitner:
    "Giant Magneto-Impedance Magnetic Field Sensor with Surface Acoustic Wave Technology";
    Vortrag: 13th European Conference on Solid-State Sensors, Actuators and Microsystems, The Hague; 12.09.1999 - 15.09.1999; in: "Eurosensors XIII Abstracts (1999), S. 405 und Proc. of Eurosensors XIII", EUROSENSORS XIII, 405 (1999), ISBN: 90-76699-02-x; S. 597 - 600.
  601. H. Hauser, J. Nicolics, A. Pohl:
    "Magnetic Field Sensor by Giant Magneto-Impedance";
    Vortrag: 16th IEEE Instrumentation & Measurement Technology Conference (IMTC 99), Venice, Italy; 24.05.1999 - 26.05.1999; in: "Proc. of IMTC 99", IEEE Catalog No. 99CH36309, (1999), ISBN: 0-7803-5276-9; S. 275 - 278.
  602. H. Hauser, J. Nicolics, H. Bruggraber, H. Newald:
    "Miniaturized Giant Magneto-Impedance Reading Head for Magnetomechanical Bar-Code";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Szklarska Poreba, Poland; 08.06.1997 - 11.06.1997; in: "Proc. of ISSE 97", (1997), S. 152 - 156.
  603. H. Hauser, Y. Melikhov, D. Jiles:
    "The inner demagnetizing factor in hysteresis models";
    als Vortrag angenommen für: International Symposium on Hysteresis Modeling and Micromagnetics, Neaples, Italy; 04.06.2007 - 06.06.2007; in: "Proceedings of HMM-2007", (2007).
  604. H. Hauser, E. Hristoforou, A. Ktena:
    "Modeling of Magnetostriction in Amophous Wire Delay Lines";
    Vortrag: 47th Annual Conference on Magnetism & Magnetic Materials, Tampa, Florida, USA; 11.11.2002 - 15.11.2002; in: "Abstracts MMM 02", (2002), S. 415 - 416.
  605. H. Hauser, H. Homolka, M. Franz:
    "Microscopic Analysis of Arcs Between Relay Contacts";
    Poster: 8th Int. Symposium on Non-Linear Electromagnetic Systems (ISEM), Braunschweig, Germany; 12.05.1997 - 14.05.1997; in: "Nonlinear Electromagnetic Systems; Studies in Applied Electromagnetics and Mechanics", V. Kose, J. Sievert (Hrg.); IOS Press, Amsterdam, 13 (1998), ISBN: 90-5199-381-1; S. 851 - 854.
  606. H. Hauser, F. Himmelstoß, P. Wurm:
    "Magnetic Loss Calculation of a CD/CD Converter";
    Poster: 10th International Symposium on Applied Electromagnetics and Mechanics, Tokyo, Japan; 13.05.2001 - 16.05.2001; in: "Proceedings of the 10th International Symposium on Applied Electromagnetics and Mechanics", (2001), S. TP-5-7.
  607. H. Hauser, F. Himmelstoß, P. Wurm:
    "Magnetic Loss Measurement during start-up of a DC/DC Converter";
    Poster: 6th Int. Workshop on 1&2 - Dimensional Magnetic Measurement and Testing, Bad Gastein Ö; 20.09.2000 - 21.09.2000; in: "Abstracts of the 6th Intern. Workshop on 2-D M", (2000), ISBN: 3-902105-00-3; S. D-7.
  608. H. Hauser, F. Himmelstoß, P. Wurm:
    "Magnetic Loss Measurement During Start-Up of a DC/DC Converter";
    Vortrag: 2DM 1&2 Dimensional Magnetic Measurement and Testing, Bad Gastein; 20.09.2006 - 21.09.2006; in: "Proceedings 2-D M", (2006), ISBN: 3-902105-00-3; S. 109 - 116.
  609. H. Hauser, F. Himmelstoß, P. Wurm:
    "Modelling of an Autotransformer of a DC/DC Converter";
    Poster: 9th Int. Symposium on Non-Linear Electromagnetic Systems (ISEM), Pavia, Italy (eingeladen); 10.05.1999 - 12.05.1999; in: "Nonlinear Electromagnetic Systems: Studies in Applied Electromagnetics and Mechanics", P. Di Barba, A. Savini (Hrg.); IOS Press, Amsterdam, 18 (2000), ISBN: 1-58603-024-8; S. 161 - 164.

    Zusätzliche Informationen
  610. H. Hauser, R. Grössinger, M. Dahlgren:
    "Synthesis and Modeling of Nanocrystaline Pr-Fe-B";
    Poster: 44th Annual Conference on Magnetism & Magnetic Materials (MMM 99), San Jose, USA; 15.11.1999 - 18.11.1999; in: "MMM 99-Abstracts", (1999), S. 308 - 309.
  611. H. Hauser, R. Grössinger:
    "Directional Dependence of Magnetization and Minor Loops of Ba- and Sr-Ferrites";
    Vortrag: INTERMAG 2003 (International Magnetics Conference Boston, March 30 - April 3), Boston, Massachusetts; 28.03.2003 - 03.04.2003; in: "INTERMAG 2003 Digest CD-ROM", (2003), 2 S.
  612. H. Hauser, R. Grössinger:
    "Hysteresis model paramter interpretation in hard magnetic ferrites";
    Vortrag: 9th Joint MMM / INTERMAG Conference, Anaheim, CA; 05.01.2004 - 09.01.2004; in: "Book of Abstracts", (2004), S. 445 - 446.
  613. H. Hauser, I. Giouroudi, J. Nicolics, G. Rieger, J. Wecker, G. Daalmans:
    "MI Effect in Amorphous CoFe Thin film Trilayers and Demonstrator Packaging";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Cluj-Napoca, Romania; 09.05.2007 - 13.05.2007; in: "Proc. of 30th Int. Spring Seminar on Electronics Technology", (2007), ISBN: 1-4244-1218-8; S. 281 - 286.
  614. H. Hauser, I. Giouroudi, J. Nicolics, K. Ludwig, G. Rieder, J. Wecker, G. Daalmans:
    "Magnetoimpedance effect in amorphous thin film trilayers";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Cluj-Napoca, Romania; 09.05.2007 - 13.05.2007; in: "Book of Abstracts of 30th Int. Spring Seminar on Electronics Technology", (2007), ISBN: 978-973-713-174-4; S. 140 - 141.
  615. H. Hauser, I. Giouroudi, L. Bär, G. Daalmans, G. Gieres, G. Rieger, M. Rührig, J. Wecker, N. Wiese:
    "Characterization of Magneto-Impedance Thin Film Microstructures";
    Vortrag: International Conference on Magnetic Measurements, Prague, Czech Republic; 30.06.2004 - 02.07.2004; in: "Book of Abstracts - Magnetic Measurements 2004", (2004), ISBN: 80-01-02994-8; S. 7 - 8.
  616. H. Hauser, P.L. Fulmek, G. Stangl, P. Aigner:
    "Thin Permalloy Films of High Magnetoresistance";
    Poster: 43rd Annual Conference on Magnetism & Magnetic Materials (MMM 98), Miami, USA; 11.09.1998 - 12.09.1998; in: "MMM98 - Abstracts", (1998), S. 247.
  617. H. Hauser, P.L. Fulmek, D. Jiles, B. Zhu:
    "Hysteresis Measurement and Modelling of thin Permalloy Films with Uniaxial Anisotropy";
    Vortrag: 2DM 1&2 Dimensional Magnetic Measurement and Testing, Bad Gastein; 20.09.2006 - 21.09.2006; in: "Proceedings 2-D M", (2006), ISBN: 3-902105-00-3; S. 220 - 224.
  618. H. Hauser, P.L. Fulmek, F. Himmelstoß, T. Wolbank, R. Wöhrnschimmel, P. Wurm:
    "Magnetic Hysteresis Modeling of Electronic Components";
    Vortrag: IEEE International Workshop on Electronic Design, Test and Applications, Christchurch, New Zealand; 29.01.2002 - 31.01.2002; in: "DELTA Proceedings", (2002), ISBN: 0-7695-1453-7; S. 272 - 279.
  619. H. Hauser, P.L. Fulmek, P. Haumer, M. Vopálenský, P. Ripka:
    "Prediction of Flipping Fields in AMR Sensors";
    Poster: 46th Annual Conference on Magnetism & Magnetic Materials, Seattle, Washington, USA; 12.11.2001 - 16.11.2001; in: "MMM Abstracts", (2001), S. 292.
  620. H. Hauser, P.L. Fulmek, P. Haumer, M. Vopálenský, P. Ripka:
    "Prediction of the Flipping fields in AMR Sensors";
    Poster: 4th European Magnetic Sensors and Actuators Conference (EMSA 2002), Athens, Greece; 03.07.2002 - 05.07.2002; in: "Book of Abstracts EMSA 2002", (2002), S. S3_P6.
  621. H. Hauser, P.L. Fulmek, P. Haumer, G. Stangl, D. Bajalan:
    "Characterization of Nanostructured Magnetic Thin Film Multilayers";
    Vortrag: ICCE/8 - Eighth Annual International Conference on Composites Engineering, Tenerife, Canary Island, Spain; 05.08.2001 - 11.08.2001; in: "Proceedings ICCE/8", D. Hui (Hrg.); (2001), S. 339 - 340.
  622. H. Hauser, P.L. Fulmek, P. Haumer, G. Stangl, D. Bajalan:
    "Magnetization Reversal in Ion Beam Nanostructured Co/Pt Multilayers";
    Vortrag: International Conference on Nanotechnology, Maui, Hawaii; 28.10.2001 - 30.10.2001; in: "Proceedings of the 1st IEEE Conference on Nanotechnology", (2001), S. 65 - 70.
  623. H. Hauser, P.L. Fulmek, R. Grössinger, D. Holzer:
    "Synthesis and Modelling of Nanocrystalline Fe-Co-B Alloys";
    Poster: 43rd Annual Conference on Magnetism & Magnetic Materials (MMM 98), Miami, USA; 11.09.1998 - 12.09.1998; in: "MMM98 - Abstracts", (1998), S. 146.
  624. H. Hauser, P.L. Fulmek, R. Grössinger:
    "Hysteresis Simulation and Measurement of Two-Dimensional Particle Assemblies";
    Poster: Joint European Magnetic Symposia JEMS, Grenoble, Frankreich; 28.08.2001 - 01.09.2001; in: "JEMS'01 Abstracts", (2001), S. 244.
  625. H. Hauser, P.L. Fulmek, P. Andrej, L. Stoleriu, D. Jiles, B. Zhu:
    "Performance of Hysteresis Simulation for Two-Dimensional Particle Assemblies";
    Vortrag: 2DM 1&2 Dimensional Magnetic Measurement and Testing, Bad Gastein; 20.09.2006 - 21.09.2006; in: "Proceedings 2-D M", (2006), S. 225 - 228.
  626. H. Hauser, P.L. Fulmek, P. Andrei, L. Stoleriu, D. Jiles:
    "Performance of Hysteresis Simulation for Two-Dimensional Particle Assemblies";
    Poster: 6th Int. Workshop on 1&2 - Dimensional Magnetic Measurement and Testing, Bad Gastein, Ö; 20.09.2000 - 21.09.2000; in: "Abstracts of the 6th Intern. Workshop on 2-D M", (2000), ISBN: 3-902105-00-3; S. G-5.
  627. H. Hauser, P.L. Fulmek, P. Andrei:
    "Application of the Energetic Model to magnetic NDE";
    Vortrag: Universal Network for Magnetic Non-destructive Evaluation, Vienna, Austria; 15.09.2005 - 16.09.2005; in: "Proceedings", (2005), S. 7 - 8.
  628. H. Hauser, P.L. Fulmek:
    "Hysteresis Model for Isotropic Magnetization Processes";
    Poster: European Magnetic Materials and Applications Conference (EMMA 98), Zaragoza, Spain; 09.09.1998 - 12.09.1998; in: "EMMA98 - Abstracts", (1998), S. 11033.
  629. H. Hauser, P.L. Fulmek:
    "Hysteresis modeling and parameter interpretation of thin films for AMR sensors";
    Vortrag: 9th Joint MMM / INTERMAG Conference, Anaheim, CA; 05.01.2004 - 09.01.2004; in: "Book of Abstracts", (2004), S. 213 - 214.
  630. H. Hauser, P.L. Fulmek:
    "Magnetization Process and Statistical Domain Behaviour";
    Poster: Int. Symposium on Non-Linear Electromagnetic Systems (ISEM), Braunschweig, Germany; 12.05.1997 - 14.05.1997; in: "Nonlinear Electromagnetic Systems; Studies in Applied Electromagnetics and Mechanics", V. Kose, J. Sievert (Hrg.); IOS Press, Amsterdam, 13 (1998), ISBN: 90-5199-381-1; S. 535 - 538.
  631. H. Hauser, P.L. Fulmek:
    "Magnetization reversal and statistical domain behaviour";
    Poster: Int. Conference on Magnetism (ICM 97), Cairns, Australia; 27.07.1997 - 01.08.1997; in: "Programme and Abstract Booklet", (1997), S. G37.
  632. H. Hauser, P.L. Fulmek:
    "Modeling of anisotropic magnetoresistance sensors";
    Poster: Soft Magnetic Materials Conference (SMM15), Bilbao, Spanien; 05.09.2001 - 07.09.2001; in: "SMM15 Abstracts", (2001), S. 30.
  633. H. Hauser, P.L. Fulmek:
    "Statistical Hysteresis Model for Anisotropic and Isotropic Magnetic Materials";
    Poster: Soft Magnetic Materials Conference (SMM13), Grenoble, France; 24.09.1997 - 26.09.1997; in: "SMM13 Abstracts", (1997), S. 26.
  634. H. Hauser, H. Frais-Kölbl:
    "Characterization of Amorphous Video Heads";
    Poster: Soft Magnetic Materials Conference (SMM13), Grenoble, France; 24.09.1997 - 26.09.1997; in: "SMM13-Abstracts", (1997), S. 91.
  635. H. Hauser, H. Frais-Kölbl:
    "Measurement of NdFeB Magnetization Curves During Pulse Magnetization";
    Vortrag: Magnetic Measurements 98, Vratna, Slovakia (eingeladen); 16.09.1998 - 18.09.1998; in: "MMC 98 - Abstracts", (1998), S. 11.
  636. H. Hauser, Y. Didosyan:
    "Applications of Transparent Magnets";
    Vortrag: 19th Annual Conference on Properties and Applications of Magnetic Materials (IIT19), Chicago, USA (eingeladen); 22.05.2000 - 24.05.2000; in: "IIT19 - Proceedings", (2000), S. 4201 - 4228.
  637. H. Hauser, L. Bär, G. Daalmans, G. Rieger, M. Rührig, J. Wecker:
    "Magneto-Impedance Thin Film Microstructures";
    Poster: 9th Joint MMM / INTERMAG Conference, Anaheim, CA; 05.01.2004 - 09.01.2004; in: "Book of Abstracts", (2004), S. 68 - 69.
  638. H. Hauser, B. Augustyniak, M. Radczuk:
    "Barkhausen Noise Calculation from Hysteresis Parameters";
    Poster: IEEE International Magnetics Conference, Amsterdam, The Netherlands; 28.04.2002 - 02.05.2002; in: "Digest Intermag Europe 2002", (2002), S. AU 12.
  639. H. Hauser:
    "Magnetic Hysteresis Modeling for Electronics and Sensor Devices";
    Vortrag: 4th European Magnetic Sensors and Actuators Conference (EMSA 2002), Athens, Greece (eingeladen); 03.07.2002 - 05.07.2002; in: "Book of Abstracts EMSA 2002", (2002), S. S3_INV.
  640. H. Hauser:
    "Magnetooptical Sensors";
    Vortrag: Sensors Based on Soft Magnetic Materials, Panel Discussion, Balatonfüred; 09.09.1999; in: "Journal of Magnetism and Magnetic Materials", 216 (2000), S. 795 - 799.
  641. H. Hauser:
    "Modelling of Anisotropic Magnetization Processes Including the Effect of Mechanical Stress";
    Vortrag: Magnetic Materials, Measurements and Modelling Symposium (M4 96), Ames, USA (eingeladen); 16.05.1996 - 17.05.1996; in: "Proc.of M4 96", (1996), S. 13 - 28.
  642. P. Haumer, H. Hauser, P.L. Fulmek:
    "Relation between micromagnetic and phenomenological magnetic models";
    Poster: 49th Annual Conference on Magnetism & Magnetic Materials (MMM 04), Jacksonville, Florida, USA; 07.11.2004 - 11.11.2004; in: "Book of Abstracts - MMM 04", (2004), S. FD-09.
  643. P. Haumer, P.L. Fulmek:
    "Energetic Framework for the Description of Temperature Dependent Magnetization in Ferromagnetic Thin Films";
    Vortrag: 31st International Spring Seminar on Electronics Technology (ISSE 2008), Budapest, Hungary; 07.05.2008 - 11.05.2008; in: "Conference Proceedings", (2008), ISBN: 978-1-4244-3973-7; S. 627 - 632.
  644. P. Haumer, P.L. Fulmek:
    "Estimation of the effects of microscopic misalignments on the magnetization process in thin films by energetic modeling";
    Poster: Soft Magnetic Materials (SMM 19), Torino, Italy; 06.09.2009 - 09.09.2009; in: "Book of Abstracts", (2009), S. B2-12.
  645. P. Haumer, P.L. Fulmek:
    "Generalized two-dimensional energetic hysteresis model for the representation of magnetization curves of thin film materials";
    Poster: SMM20, 20th International Conference on Soft Magnetic Materials, Kos Island, Greece; 18.09.2011 - 22.09.2011; in: "Book of Abstracts", (2011), ISBN: 978-960-9534-14-7; S. 445.
  646. P. Haumer, P.L. Fulmek:
    "Generalized two-dimensional Energetic Model of Ferromagnetic Hysteresis for Thin Film Material.";
    Poster: 10th European Conference on Magnetic Sensors and Actuators (EMSA 2014), Wien; 06.07.2014 - 09.07.2014; in: "Book of Abstracts: 10th European Conference on Magnetic Sensors and Actuators", (2014), ISBN: 978-3-85465-021-8; S. 239.

    Zusätzliche Informationen
  647. G. Hanreich, K.-J. Wolter, J. Nicolics:
    "Rework of flip-chip populated PCBs by laser desoldering";
    Vortrag: International Spring Seminar on Electronics Technology (ISSE), Calimanesti - Caciulata, Romania; 05.05.2001 - 09.05.2001; in: "Conference Proceedings ISSE 01", (2001), ISBN: 0-7803-7111-9; S. 63 - 67.
  648. G. Hanreich, J. Nicolics, K. Riedling:
    "Manufacturing a Laser Power Detector in Thick Film Technology and Thermal Optimization of its Design in a Mandatory Laboratory Course";
    Vortrag: 5th Intern. Academic Conference on Electronic Packaging, Education and Training, Dresden, D (eingeladen); 20.03.2002 - 21.03.2002; in: "Proceedings of the 5th Intern. Academic Conference on Electronic Packaging, Education and Training", R. Tummala, K.-J. Wolter, T. Zerna (Hrg.); Dr. Markus A. Detert, Templin/Uckermark, (2002), ISBN: 3-934142-07-9; S. 163 - 172.
  649. G. Hanreich, J. Nicolics, H. Hauser:
    "Thermal Characterization of Electronic Components Using a New High-Resolution Simulation Tool";
    Vortrag: 50th Electronic Components and Technology Conf. ECTE, Las Vegas, USA; 21.05.2000 - 24.05.2000; in: "IEEE Catalog", No. 00CH37070 (2000), ISSN: 0569-5503; S. 294 - 300.

    Zusätzliche Informationen
  650. G. Hanreich, J. Nicolics, R. Fasching:
    "Thermal Analysis of new Silicon-Based Substrates";
    Poster: XVI IMEKO World Congress 2000, Wien; 25.09.2000 - 28.09.2000; in: "Proceedings IMEKO 2000", Vol. 2 (2000), S. 355 - 359.

    Zusätzliche Informationen
  651. G. Hanreich, J. Nicolics, R. Enigl:
    "Determination of the Heat Transfer by Natural Convection at the Surface of Electronic Components";
    Vortrag: International Spring Seminar on Electronics Technology (ISSE), Balatonfüred, Ungarn; 06.05.2000 - 10.05.2000; in: "Proc. of IEEE, MIEL 2000", Proc. of 23rd International Spring Seminar on Electronics Technology, (2000), S. 191 - 196.
  652. G. Hanreich, J. Nicolics, R. Chabicovsky:
    "Thermal Characterization of Micro Whisker Structured Silicon Heatspreader for Power Devices";
    Vortrag: International Spring Seminar on Electronics Technology (ISSE), Dresden, Germany; 18.05.1999 - 20.05.1999; in: "Proceedings of the 22nd Intern. Spring Seminar on Electronics Technology", (1999), S. 193 - 198.
  653. G. Hanreich, J. Nicolics:
    "A New Thermal Simulation Tool Applied for Optimization of Laser Desoldering of Flip-Chip Components";
    Vortrag: EuroSimE 2001 - Benefiting from Thermal and Mechanical Simulation in (Micro)-Electronics, Paris; 09.04.2001 - 11.04.2001; in: "Proceedings of EuroSimE 2001", (2001), S. 101 - 106.
  654. G. Hanreich, J. Nicolics:
    "Measuring the natural convective heat transfer coefficient at the surface of electronik components";
    Vortrag: IEEE Instrumentation & Measurement Technology Conference, Budapest, Hungary; 21.05.2001 - 23.05.2001; in: "Proceedings of the 18th IEEE Instrumentation & Measurement Technology Conference", (2001), S. 1045 - 1046.
  655. G. Hanreich, J. Nicolics:
    "Thermal Investigation of Plastic-Encapsulated and Hermetically Sealed Components for Automotive Industry";
    Vortrag: International Spring Seminar on Electronics Technology (ISSE), Calimanesti - Caciulata, Romania; 05.05.2001 - 09.05.2001; in: "Conference Proceedings ISSE 01", (2001), ISBN: 0-7803-7111-9; S. 167 - 171.
  656. G. Hanreich, L. Musiejovsky, J. Nicolics, K. Riedling:
    "Development and Application of an Efficient Algorithm for Thermal Simulation of High-Lead Count Packages";
    Vortrag: International Spring Seminar on Electronics Technology (ISSE), Freital-Dresden, Germany; 18.05.1999 - 20.05.1999; in: "Conference Proceedings ISSE '99 - Technology Drivers in Electronics", W. Sauer, K.-J. Wolter (Hrg.); Verlag Dr. Markus A. Detert, (1999), S. 16 - 22.

    Zusätzliche Informationen
  657. G. Hanreich, L. Musiejovsky, J. Nicolics:
    "Application of the Exodus Method for Thermal Characterization of Electronic Components";
    Vortrag: International Spring Seminar on Electronics Technology (ISSE), Neusiedl am See, Austria; 04.05.1998 - 07.05.1998; in: "Proc. of 21st International Spring Seminar on Electronics Technology (ISSE 98)", Werkstoffe der Elektrotechnik, Wien (1998), ISBN: 3-85465-004-3; S. 172 - 176.

    Zusätzliche Informationen
  658. G. Hanreich, L. Musiejovsky, J. Nicolics, K. Riedling:
    "Thermal Simulation of High Lead Count Packages";
    Vortrag: International Conference on Microelectronics (MIEL), Nis, Yugoslavia; 14.05.2000 - 17.05.2000; in: "Proc. of MIEL 2000", IEEE Catalog, No. 00TH8400 (2000), S. 351 - 354.

    Zusätzliche Informationen
  659. G. Hanreich, M. Mündlein, J. Nicolics, M. Mayer:
    "Simulationsunterstützte thermische Analyse einer Galliumarsenid-Feldeffekt-Leistungstransistorbaugruppe";
    Vortrag: Elektronische Baugruppen - Aufbau- und Fertigungstechnik, Fellbach; 04.02.2004 - 05.02.2004; in: "GMM-Fachbericht: Elektronische Baugruppen", (2004), ISBN: 3-8007-2813-3; S. 505 - 509.
  660. G. Hanreich, M. Mayer, J. Nicolics:
    "Thermal Characterization of GaAs Microwave Power Transistors";
    Vortrag: Benefiting from Thermal and Mechanical Simulation in (Micro)-Electronics (EuroSIME 2002), Paris, France; 15.04.2002 - 17.04.2002; in: "Proceedings of EuroSIME 2002", (2002), S. 234 - 239.
  661. G. Hanreich, M. Mayer, J. Nicolics:
    "Thermal Performance of GaAs heterojunction Power Transistors";
    Vortrag: 25th International Spring Seminar on Electronics Technology, Prague, Czech Republic; 11.05.2002 - 14.05.2002; in: "Proceedings ISSE 2002", (2002), S. 48 - 52.
  662. G. Hanreich, H. Hauser, J. Nicolics, G. Stangl:
    "Ultra thin pick-up coil for surface flux detection";
    Vortrag: 3rd European Conference on Magnetic Sensors & Actuators (EMSA 2000), Dresden, Germany; 19.07.2000 - 21.07.2000; in: "Book of Abstracts", 13 (2000), S. 113 - 114.
  663. G. Hanreich, H. Hauser, J. Nicolics, G. Stangl, R. Grössinger:
    "Thin Film Pick-Up Coil for Surface Flux Measurement";
    Vortrag: Magnetic Measurements 2000, Prague, Czech Republic; 11.09.2000 - 12.09.2000; in: "Proceedings of the Conference Magnetic Measurements 2000", (2000), S. 1 - 4.
  664. G. Hanreich, S. Bychikhin, D. Pogany, M. Marso, P. Kordos, J. Nicolics:
    "Thermal Simulation and Charakterization of AlGaN/GaN/Si High Electron Mobility Transistors";
    Poster: ISSE 2005 - 28th International Spring Seminar on Electronics Technology, Wiener Neustadt; 19.05.2005 - 22.05.2005; in: "ISSE 2005 - 28th International Spring Seminar on Electronics Technology", Österreichischer Verband für Elektrotechnik, Wien, ÖVE Schriftenreihe Nr. 39 (2005), ISBN: 3-85133036-6; S. 106 - 107.

    Zusätzliche Informationen
  665. E. Hammel, C. Nagl, J. Nicolics, G. Hanreich:
    "High Thermal Performance Silicon Heat Spreaders with Micro Whisker Structure";
    Poster: 25th International Electronics Manufacturing Technology Symposium (IEMT 99), Austin, Texas; 18.10.1999 - 20.10.1999; in: "Proceedings 1999 IEMT Symposium", (1999), S. 426 - 432.

    Zusätzliche Informationen
  666. E. Hammel, D. Holzer, G. Hanreich, J. Nicolics:
    "Silicon Substrates with Microwhisker Structure";
    Vortrag: 32nd Int. Symposium on Microelectronics (IMAPS 99), Chicago; 26.10.1999 - 28.10.1999; in: "Proc. of the 32nd Int. Symposium on Microelectronics", (1999), ISBN: 0-930815-58-0; S. 474 - 479.

    Zusätzliche Informationen
  667. A. Hajian, M. Stöger-Pollach, M. Schneider, H. Homolka, D. Müftüoglu, U. Schmid:
    "Effect of sintering temperature on porosification behavior of fired LTCC substrates";
    Vortrag: 42nd International Conference & Exposition on Advanced Ceramics & Composites, Daytona Beach, Florida, USA; 21.01.2018 - 26.01.2018; in: "Abstract Book", (2018), S. 144.

    Zusätzliche Informationen
  668. A. Hajian, D. Müftüoglu, M. Schneider, U. Schmid:
    "Investigating the Effect of Etching Parameters on the Porosification of LTCC with Sodium Hydroxide";
    Poster: XVI Electroceramics Conference, Hasselt, Belgien; 09.07.2018 - 12.07.2018; in: "Electroceramics XVI", (2018), S. 174.
  669. J. Hafner, M. Teuschel, J. Schrattenholzer, M. Schneider, U. Schmid:
    "Optimized Batch Process for Organic MEMS Devices";
    Vortrag: Eurosensors 2018, Graz, Österreich; 09.09.2018 - 12.09.2018; in: "Proceedings - Eurosensors 2018, Graz", MDPI, (2018), ISSN: 2504-3900; S. 1 - 4.

    Zusätzliche Informationen
  670. J. Hafner, D. Canena, D. Platz, M. Schneider, P. Hinterdorfer, U. Schmid:
    "Scanning Probes with High Resonance Frequency and Low Stiffness for High-speed AFM Applications in Liquid Environments";
    Vortrag: 8th Multifrequency AFM conference, Madrid; 27.10.2020 - 30.10.2020; in: "8th Multifrequency AFM conference, Book of Abstracts", (2020), S. 28.

    Zusätzliche Informationen
  671. J. Hafner, C. Berger, D. Platz, U. Schmid:
    "Plates as Probes for Atomic Force Microscopy in Liquid Environments";
    Vortrag: XXI. Linz Winter Workshop 2019, Linz; 01.02.2019 - 03.02.2019; in: "XXI. Linz Winter Workshop 2019", (2019), S. 1.

    Zusätzliche Informationen
  672. J. Hafner, S. Benaglia, M. Teuschel, D. Platz, M. Schneider, R. Garcia, U. Schmid:
    "Multi-scale characterisation of a semi-crystalline polymer reveals hidden ferroelectricity above the Curie transiton";
    Vortrag: 8th Multifrequency AFM conference, Madrid; 27.10.2020 - 30.10.2020; in: "8th Multifrequency AFM conference, Book of Abstracts", (2020), S. 107.

    Zusätzliche Informationen
  673. T. Haas, C. Zeilmann, U. Schmid, A. Bittner:
    "Manufacturing Processes for Pressure Sensors Realized in LTCC";
    Vortrag: 13th Mechatronics Forum, Linz; 17.09.2012 - 19.09.2012; in: "Proceedings of the 13th Mechatronics Forum", (2012), ISBN: 978-3-99033-045-6.
  674. T. Haas, C. Zeilmann, A. Backes, U. Schmid, A. Bittner:
    "Investigation of Innovative Cooling Concepts for Functional Ceramic Circuits";
    Vortrag: 6th European Advanced Technology Workshop on Micropackaging and Thermal Management, La Rochelle, F; 02.02.2011 - 03.02.2011; in: "6th European Advanced Technology Workshop on Micropackaging and Thermal Management", (2011), S. 1.

    Zusätzliche Informationen
  675. T. Haas, C. Zeilmann, A. Backes, A. Bittner, U. Schmid:
    "Design and Evaluation of an Active Cooling Concept For Functional Ceramic Circuits";
    Vortrag: 21st Micromechanics and Micro Systems Europe Workshop, Enschede, NL; 26.09.2010 - 28.09.2010; in: "Abstracts", (2010), S. 80 - 83.

    Zusätzliche Informationen
  676. D. Güleryüz, W. Smetana, H. Homolka, M. Mündlein, M. Unger:
    "Aspects Concerning the Optimization of a Calorimetric Flow Sensor Built Up in Thick-Film Technology";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Wr. Neustadt, Austria; 19.05.2005 - 22.05.2005; in: "Proceedings of 28th ISSE 2005", (2005), ISBN: 0-7803-9324-4; S. 370 - 376.
  677. D. Güleryüz, W. Smetana, H. Homolka, M. Mündlein, M. Unger:
    "Characterization of a Calorimetric Flow Sensor Built Up in Tick-Film Technology";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Wr. Neustadt, Austria; 19.05.2005 - 22.05.2005; in: "Book of Abstracts", (2005), ISBN: 3-85133-036-6; S. 166 - 167.
  678. D. Güleryüz, W. Smetana:
    "Mass Flow Sensor Realized in LTCC-Technology";
    Vortrag: International Conference of International Microelectronics and Packaging Society Poland Chapter, Koszalin-Darlowko, Poland; 18.09.2005 - 21.09.2005; in: "Proceedings of XXIX Intern. Conference of IMAPS Poland Chapter", (2005), ISBN: 83-917701-2-5; S. 373 - 376.
  679. W. Gschohsmann, W. Smetana, W. Fleischer:
    "Pore Formation in Lead-Free Solders on Cu- and Ag-Metallization";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Wr. Neustadt, Austria; 19.05.2005 - 22.05.2005; in: "Proceedings of 28th ISSE 2005", (2005), ISBN: 0-7803-9324-4; S. 251 - 257.
  680. W. Gschohsmann, W. Smetana, W. Fleischer:
    "Porosity in Lead-Free Sn95.5Ag3.8Cu Solder Joints with Cu- and Ag-Pad Metallization";
    Vortrag: International Spring Seminar on Electronics Technology (ISSE), Wr. Neustadt, Austria; 19.05.2005 - 22.05.2005; in: "Book of Abstract", (2005), ISBN: 3-85133-036-6; S. 48 - 49.
  681. W. Gschohsmann, W. Smetana:
    "FE-Analysis of Lead-Less Solder Joints with Pore Inclusion";
    Vortrag: International Conference of International Microelectronics and Packaging Society Poland Chapter, Koszalin-Darlowko, Poland; 18.09.2005 - 21.09.2005; in: "Proceedings of XXIX Intern. Conference of IMAPS Poland Chapter", (2005), ISBN: 83-917701-2-5; S. 227 - 230.
  682. W. Gschohsmann, W. Smetana:
    "Interdependency of pores and mechanical stength of lead-free solder joints on Ag-thick film metallization";
    Vortrag: International Conference of IMAPS Poland Chapter, Krakow, Polen; 24.09.2006 - 27.09.2006; in: "Proceedings of the XXX International Conference of IMAPS Poland Chapter", (2006), S. 225 - 228.
  683. W. Gschohsmann, W. Smetana:
    "Misinterpretation of Mechanical Stenght of Solder Joints due to Pore Formation";
    Vortrag: European Microelectronics and Packaging Symposium (EMPS), Terme Catez, Slovenia; 22.05.2006 - 26.05.2006; in: "Proceedings EMPS 2006", (2006), S. 171 - 176.
  684. W. Gschohsmann, W. Smetana:
    "Stress Distribution Analyses in Loaded Optical Fibers";
    Poster: International Conference of IMAPS Poland Chapter, Pultusk, Poland; 21.09.2008 - 24.09.2008; in: "Abstracts Proceedings of the XXXII International Conference of IMAPS Poland Chapter", (2008), ISBN: 978-83-917701-6-0; 1 S.
  685. W. Gschohsmann, J. Nicolics:
    "A model to specify the deformations in ceramic sensor strips subjected to surface displacements in the contact area";
    Vortrag: 34th International Microelectronics and Packaging IMAPS-CPMT Poland Conference, Wroclaw; 22.09.2010 - 25.09.2010; in: "Book of Abstracts", (2010), ISBN: 978-83-917701-8-4; S. 178.
  686. W. Gschohsmann, R. Hajek, H. Rumpler, G. Eckl, W. Smetana:
    "Thermal Finite-Element-Analyses as a Tool for Prototyping Cooling Devices Developed for Combustile Cell Inverters";
    Vortrag: European Microelectronics and Packaging Symposium (EMPS), Terme Catez, Slovenia; 22.05.2006 - 24.05.2006; in: "Proceedings EMPS 2006", (2006), S. 205 - 210.
  687. M. Grosser, H. Seidel, U. Schmid:
    "Einfluss der Sputterparameter auf Morphologie, Phasenbildung und elektrische Eigenschaften von dünnen Tantalschichten";
    Poster: Mikrosystemtechnik Kongress 2009, Berlin, D; 12.10.2009 - 14.10.2009; in: "Mikrosystemtechnik Kongress 2009 - Proceedings", VDE Verlag, (2009), ISBN: 978-3-8007-3183-1.

    Zusätzliche Informationen
  688. M. Grosser, U. Schmid:
    "Influence of Back Pressure and Plasma Power on Grain Size, Phase Composition and Resistivity of Tantalum Thin Films";
    Vortrag: SPIE Europe: Microtechnologies for the New Millennium, Dresden, Deutschland; 04.05.2009 - 08.05.2009; in: "Proceedings of SPIE", Society of Photo-Optical Instrumentation Engineers (SPIE, 7362-7366 (2009), 8 S.

    Zusätzliche Informationen
  689. St. Groß, W. Grübl, B. Schuch, H. Stahr, M. Morianz, L. Böttcher, D. Manessis, J. Nicolics, M. Unger:
    "EmPower - Embedded power components for electric vehicle applications";
    Vortrag: Automotive Power Electronics, APE 2017, Paris, France; 26.04.2017 - 27.04.2017; in: "Proceedings APE 2017", (2017), 7 S.
  690. St. Groß, K. Beart, Th. Schmidt, B. Schuch, H. Stahr, M. Morianz, J. Nicolics, M. Unger:
    "EmPower - Integrierte Leistungskomponenten für Elektrofahrzeuge";
    Vortrag: Elektronische Baugruppen und Leiterplatten EBL 2016 - Multifunktionale Baugruppen - Leistungsdichte am Limit?, Fellbach, D; 16.02.2016 - 17.02.2016; in: "Tagungsband EBL 2016", (2016), 6 S.
  691. R. Grössinger, F. Keplinger, H. Hauser, E. Wagner:
    "The Design and Construction of a Thin Foil High Field Magnet";
    Poster: 7th International Symposium on Research in High Magnetic Fields, Toulouse, France; 20.07.2003 - 23.07.2003; in: "Proceedings", (2003), S. 130.
  692. R. Grössinger, H. Hauser, L. Stoleriu, P. Andrei:
    "Hysteresis Modelling of Anisotropic Barium-Ferrite";
    Poster: Int. Magnetics Conference (Intermag 2000), Toronto; 09.04.2000 - 13.04.2000; in: "Intermag 2000 Digest", (2000), S. 181 - 182.
  693. R. Grössinger, H. Hauser, M. Dahlgren:
    "Hysteresis Measurements and Modeling of Nanocrystaline R-Fe-B";
    Poster: 2nd Int. Symposium on Hysteresis Modeling and Micromagnetics (HMM 99), Perugia, Italy; 07.06.1999 - 09.06.1999; in: "HMM99-Abstracts", (1999), S. 222.
  694. R. Grössinger, H. Hauser, M. Dahlgren, J. Fidler, H. Sassik:
    "Hysteresis of Nanocrystalline R-Fe-B";
    Poster: ÖPG-Jahrestagung, Innsbruck; 20.09.1999 - 25.09.1999; in: "Tagungsband der 49. Jahrestagung der Österr. Physikalischen Gesellschaft", (1999), S. P28.
  695. R. Grössinger, H. Hauser:
    "Hysteresis Model for Anisotropic Magnetization Process - Application and Physical Interpretation";
    Poster: Intern. Conference on Magnetism (ICM 2000), Recife, Brasil; 06.08.2000 - 11.08.2000; in: "Book of Abstracts", (2000), S. 252 - 253.
  696. R. Grössinger, H. Hauser:
    "Interpretation of the Microstructure in Permanent Magnets by Hysteresis Model Parameters";
    Poster: International Conference on Magnetism, Roma, Italy; 27.07.2003 - 01.08.2003; in: "ICM 2003 Abstracts", (2003), S. 602.
  697. R. Grill, P. Kläusler, F. Mueller, O. Schrott, H. Hauser:
    "WC / Ag Contact Materials with Improved Homogeneity";
    Vortrag: 21st International Conference on Electrical Contacts, Zürich, Switzerland; 09.09.2002 - 12.09.2002; in: "Proceedings of the 21st Intern. Conference on Electrical Contacts", (2002), ISBN: 3-9522504-0-6; S. 486 - 491.
  698. A. Grafl, F. Franek:
    "ALTERUNGSVERHALTEN VON SCHMIERÖLEN";
    Vortrag: ÖTG-Symposium 2007, St. Pölten; 22.11.2007; in: "RELIABILITY ENGINEERING - Simulation und Monitoring von verschleißgefährdeten Systemen", (2007), ISBN: 978-3-901657-28-3; S. 163 - 174.

    Zusätzliche Informationen
  699. Z. Gökdeniz, M. Mündlein, G. Khatibi, A. Steiger-Thirsfeld, J. Nicolics:
    "Ermüdungsverhalten hoch-belasteter Ag-Sinterverbindungen";
    Vortrag: EBL 2020 - Elektronische Baugruppen und Leiterplatten, Fellbach, D; 18.09.2020 - 19.09.2020; in: "EBL 2020 - Elektronische Baugruppen und Leiterplatten", VDE, (2020), ISBN: 978-3-8007-5185-3; S. 204 - 209.

    Zusätzliche Informationen
  700. Z. Goekdeniz, M. Lederer, G. Khatibi, J. Nicolics:
    "Temperature Dependent Relaxation Behavior of Ag-Sintered Copper Joints";
    Vortrag: 2021 23rd European Microelectronics and Packaging Conference & Exhibition (EMPC), Gothenburg, Sweden; 13.09.2021 - 16.09.2021; in: "2021 23rd European Microelectronics and Packaging Conference & Exhibition (EMPC)", (2021), S. 1 - 5.

    Zusätzliche Informationen
  701. Z. Gökdeniz, G. Khatibi, T. Walter, J. Nicolics:
    "Temperature Dependent Mechanical Properties of Sintered Silver-Copper Joints";
    Vortrag: 41st International Spring Seminar on Electronics Technology (ISSE), Zlatibor; 16.05.2018 - 20.05.2018; in: "Book of Abstracts ISSE 2018", IEEE, (2018), ISBN: 978-1-5386-5731-7; S. 57 - 58.
  702. R. Glatz, P.L. Fulmek, S. Skerlan, M. Siegele, G. Radosavljevic, J. Nicolics:
    "Thermal Study of a ZrO2-Based Heater Element by Thermography at Different Spectral Sensitivities";
    Poster: 35th International Spring Seminar on Electronics Technology (ISSE 2012), Bad Aussee; 09.05.2012 - 13.05.2012; in: "Book of Abstracts", (2012), ISBN: 978-3-85465-015-7; S. 46 - 47.
  703. I. Giouroudi, J. Kosel, H. Pfützner, W. Brenner:
    "Test Device for Rotating Microsystems";
    Poster: MNE2006 - Micro- and Nano-Engineering 2006 - 32nd International Conference, Barcelona, Spain; 17.09.2006 - 20.09.2006; in: "MNE 2006 - Book of Abstracts", (2006), S. 445 - 446.

    Zusätzliche Informationen
  704. I. Giouroudi, J. Kosel, J Contreras, H. Pfützner, D. Andrijasevic, W. Brenner:
    "Evaluation of Micromotors";
    Poster: EUSPEN 2006 - 6th International conference and 8th annual general meeting of the european society for precision engineering and nanotechnology, Baden bei Wien; 28.05.2006 - 01.06.2006; in: "Proceedings of the 6th International conference euspen", euspen, Volume 1 (2006), ISBN: 0-9553082-0-8; S. 159 - 162.

    Zusätzliche Informationen
  705. I. Giouroudi, J. Kosel, D. Andrijasevic, W. Brenner:
    "Design of a Microgripping System for Microhandling ans Assembly";
    Poster: AED 2006 - Advanced Engineering Design, Prague, Czech Republic; 11.06.2006 - 14.06.2006; in: "AED 2006 - Advanced Engineering Design", (2006), Paper-Nr. P5.03, 6 S.

    Zusätzliche Informationen
  706. I. Giouroudi, H Hötzendorfer, W. Brenner:
    "A Force Feedback System for Micromanipulation with Stereoscopic Imaging";
    Poster: MNE2006 - Micro- and Nano-Engineering 2006 - 32nd International Conference, Barcelona, Spain; 17.09.2006 - 20.09.2006; in: "MNE 2006 - Book of Abstracts", (2006), S. 411 - 412.

    Zusätzliche Informationen
  707. I. Giouroudi, H Hötzendorfer, D. Andrijasevic, M Ferros, W. Brenner:
    "Design of a Microgripping System with Visual and Force Feedback for MEMS applications";
    Vortrag: The IET Seminar on MEMS Sensors & Actuators, London, UK; 27.04.2006 - 28.04.2006; in: "The IET Seminar on MEMS Sensors & Actuators", Institution of Engineering and Technology, (2006), ISBN: 0-86341-627-6; S. 245 - 249.
  708. I. Giouroudi, H. Hauser, J. Nicolics, L. Musiejovsky:
    "GMI Effect in Laser Micromachined Wire-Sensors";
    Poster: Magnetic Measurements '06, Zavazna Poruba, Slovakia (eingeladen); 21.09.2006 - 23.09.2006; in: "Magnetic Measurements '06 - The Book of Abstracts", Slovak University of Technology, (2006), ISBN: 80-227-2452-1; S. 95 - 96.
  709. I. Giouroudi, H. Hauser, L. Musiejovsky, J. Steurer:
    "CoFeB/Cu/CoFeB layered film for Giant Magneto-Impedance";
    Vortrag: 12th International Symposium on Interdisciplinary Electromagnetic, Mechanic & Biomedical Problems, Bad Gastein, Austria; 12.09.2005 - 14.09.2005; in: "Short Paper Proceedings ISEM 2005", (2005), ISBN: 3-902105-00-1; S. 72 - 73.
  710. I. Giouroudi, H. Hauser, L. Musiejovsky, J. Steurer:
    "Development of amorphous thin film meander trilayers and investigation of GMI effect";
    Vortrag: 3rd IEEE Conference on Sensors (IEEE Sensors 2004), Vienna, Austria; 24.10.2004 - 27.10.2004; in: "CD-ROM Proceedings Sensor 2004", D. Rocha Wiese Meneses, P. M. Sarro, M. Vellekoop (Hrg.); (2004), ISBN: 0-7803-8692-2; S. 1024 - 1027.
  711. I. Giouroudi, H. Hauser, L. Musiejovsky, J. Steurer:
    "GMI Sensor integrated in an oscillator system";
    Vortrag: Annual Conference on Magnetism & Magnetic Materials, San Jose, USA; 30.10.2005 - 03.11.2005; in: "Book of Abstracts - 50th Annual Conference on Magnetism and Magnetic Materials", (2005), S. 70 - 71.
  712. I. Giouroudi, H. Hauser, L. Musiejovsky, J. Steurer:
    "Hysteresis Modeling of Giant Magnetoimpedance Thin Films";
    Poster: European Magnetic Sensors & Actuators Conference, Bilbao, Spanien; 03.07.2006 - 05.07.2006; in: "Book of Abstracts EMSA 2006", (2006), S. 128.
  713. I. Giouroudi, H. Hauser, L. Musiejovsky, J. Steurer:
    "Investigation of GMI effect in amorphous thin film microstructures";
    Poster: 49th Annual Conference on Magnetism & Magnetic Materials (MMM 04), Jacksonville, Florida, USA; 07.11.2004 - 11.11.2004; in: "Book of Abstracts - MMM 04", (2004), S. CP-12.
  714. I. Giouroudi, H. Hauser, K. Ludwig:
    "Investigation of Amorphous CoFe Thin Film Trilayers and for GMI Sensor Applications";
    Poster: 3rd IEEE Conference on Sensors (IEEE Sensors 2004), Vienna, Austria; 24.10.2004 - 27.10.2004; in: "IEEE Sensors Proceedings", (2004), ISBN: 0-7803-8693-0; S. 216 - 217.
  715. I. Giouroudi, D. Andrijasevic, H Hötzendorfer, J. Kosel, W. Brenner:
    "Developemnet of a Microgripping System for Handling of Micro Components";
    Poster: EUSPEN 2006 - 6th International conference and 8th annual general meeting of the european society for precision engineering and nanotechnology, Baden bei Wien; 28.05.2006 - 01.06.2006; in: "Proceedings of the 6th International conference euspen", euspen, Volume 1 (2006), ISBN: 0-9553082-0-8; S. 369 - 372.

    Zusätzliche Informationen
  716. M. Gillinger, M. Schneider, A. Bittner, P. Nicolay, U. Schmid:
    "High temperature performance of sputter-deposited piezoelectric aluminum nitride thin films";
    Vortrag: Smart Sensors, Actuators and MEMS VII - 2015, Barcelona, Spain; 04.05.2015 - 06.05.2015; in: "Proc. of SPIE Vol. 9517-9520", SPIE, 9517 (2015), ISSN: 0277-786x; Paper-Nr. 951707, 8 S.

    Zusätzliche Informationen
  717. M. Gillinger, T. Knobloch, M. Schneider, U. Schmid:
    "Harsh Environmental Surface Acoustic Wave Temperature Sensor Based on Pure and Scandium doped Aluminum Nitride on Sapphire";
    Vortrag: Eurosensors 2017, Paris, Frankreich; 03.09.2017 - 06.09.2017; in: "Proceedings of Eurosensors 2017, Paris", MDPI, Vol. 1/ Iss. 4 (2017), ISSN: 2504-3900; S. 1 - 4.

    Zusätzliche Informationen
  718. A. Gesing, D. Platz, U. Schmid:
    "Modeling non-conventional vibrational modes of micro-resonators in viscous fluids";
    Vortrag: ICoNSoM 2019 - International Conference on Nonlinear Solid Mechanics, Rom, I; 20.06.2019 - 23.06.2019; in: "International Conference on Nonlinear Solid Mechanics", (2019), S. 1.

    Zusätzliche Informationen
  719. A. Gesing, D. Platz, U. Schmid:
    "Quality Factors of MEMS Plate Modes in Fluids";
    Vortrag: Mikrosystemtechnik-Kongress 2021, Ludwigsburg, Deutschland; 08.11.2021 - 10.11.2021; in: "Mikrosystemtechnik-Kongress 2021", VDE-Verlag, (2021), ISBN: 978-3-8007-5656-8; Paper-Nr. D5.2, 4 S.

    Zusätzliche Informationen
  720. A. Gesing, D. Platz, U. Schmid:
    "Reducing thermal noise in atomic force microscopy with intermodal coupling";
    Vortrag: 2021 International Scanning Probe Microscopy (ISPM) + Scanning Probe Microscopy on Soft & Polymeric Materials (SPMonSPM), ISPM³ (online); 28.06.2021 - 02.07.2021; in: "2021 International Scanning Probe Microscopy (ISPM) + Scanning Probe Microscopy on Soft & Polymeric Materials (SPMonSPM)", (2021), S. 114.
  721. Z. Geokdeniz, G. Khatibi, J. Nicolics, A. Steiger-Thirsfeld:
    "Behavior of silver-sintered joints by cycling mechanical loading and influence of temperature";
    Poster: EMPC, 22nd Microelectronics an Packaging Conference (EMPC) & Exhibition, Pisa, Italy; 16.09.2019 - 19.09.2019; in: "EMPC, 22nd Microelectronics an Packaging Conference (EMPC) & Exhibition", IEEE (Hrg.); IEEE- Explore, (2019), S. 1 - 6.
  722. I. Gebeshuber, H. Stachelberger, M. Drack, F. Franek:
    "Biotribology at the Micro- and Nanoscale as Exemplified by Diatoms";
    Vortrag: 1st Vienna International Conference on Micro- and Nano-Technology - Viennano'05, Vienna, Austria; 09.03.2005 - 11.03.2005; in: "1st Vienna International Conference on Micro- and Nano-Technology - Proceedings", Österreichische Tribologische Gesellschaft, Wien (2005), ISBN: 3-901657-17-7; S. 135 - 140.

    Zusätzliche Informationen
  723. I. Gebeshuber, A. Pauschitz, F. Franek:
    "Biotribological model systems for emerging nanometer scale technologies";
    Poster: IEEE Conf. on Emerging Technologies - Nanoelectronics, Singapur; 12.01.2006; in: "IEEE Conf. on Emerging Technologies - Nanoelectronics", p. 396 - 400 (2006), ISBN: 0-7803-9358-9; 5 S.

    Zusätzliche Informationen
  724. M. Gaugitsch, H. Hauser, J. Hochreiter, F. Haberl:
    "Magneto-optischer Sensor zur Bestimmung der atmosphärischen Refraktion";
    Vortrag: Kongress für Optische Sensorik, Meßtechnik, Elektronik (OPTO 96), Leipzig, Germany; 25.09.1996 - 27.09.1996; in: "OPTO 96 - Tagungsband", ACS Organisations Ges.m.b.H./AMA Fachverband f. Sensorik, (1996), S. 127 - 132.
  725. M. Gaugitsch, H. Hauser, F. Haberl, J. Hochreiter, K. Vorlicek:
    "Magneto-optical Displacement Sensor";
    Poster: Int. Symposium on Non-Linear Electromagnetic Systems (ISEM 95), Cardiff, Great Britain; 17.09.1995 - 20.09.1995; in: "Nonlinear Electromagnetic Systems; Studies in Applied Electromagnetics and Mechanics", A.J. Moses, A. Basak (Hrg.); IOS Press, Amsterdam, 10 (1996), ISBN: 90-5199-251-3; S. 688 - 691.
  726. M. Gaugitsch, H. Hauser:
    "Magneto-optical sensor for atmospheric refraction measurements";
    Vortrag: 2nd Congress on Optical Sensor Technology, Measuring Techniques, Electronics (OPTO 96), Leipzig, BRD; 25.09.1996 - 27.09.1996; in: "Kongreßband", ACS Organisation-Ges.m.b.H./AMA Fachverband f. Sensorik, (1996), S. 127 - 132.
  727. M. Gaugitsch, H. Hauser:
    "Optimization of a Magneto-Optical Light Modulator and Displacement Sensor";
    Poster: 1st European Magnetic Sensors and Actuators Conference (EMSA 96), Iasi, Romania; 22.07.1996 - 24.07.1996; in: "EMSA96-Abstracts", (1996), S. A103.
  728. C. Gachot, M. Hans, R. Catrin, U. Schmid, F. Mücklich:
    "Tuned Wettability of Material Surfaces for tribological Applications in miniaturized Systems by Laser Interference Metallurgy";
    Vortrag: SPIE Europe: Microtechnologies for the New Millennium, Dresden, Deutschland; 04.05.2009 - 08.05.2009; in: "Proceedings of SPIE", Society of Photo-Optical Instrumentation Engineers (SPIE), Vols. 7362-7266 (2009), 9 S.

    Zusätzliche Informationen
  729. P.L. Fulmek, F. Wenzl, W. Nemitz, S. Schweitzer, H. Hoschopf, G. Langer, J. Nicolics:
    "Innovative Junction Temperature Measurement Method Applied on High-Power LED Arrays";
    Vortrag: 37th International Spring Seminar on Electronics Technology, Dresden; 07.05.2014 - 11.05.2014; in: "Proceedings of the 37th ISSE", (2014), ISBN: 978-1-4799-4026-4; S. 36 - 37.
  730. P.L. Fulmek, B. Schweighofer, P. Haumer, H. Wegleiter, G. Holler:
    "Measurement of transient magnetic AC-properties of NiZn-ferrites";
    Poster: Soft Magnetic Materials (SMM 19), Torino, Italy; 06.09.2009 - 09.09.2009; in: "Book of Abstracts", (2009), S. E3-06.
  731. P.L. Fulmek, J. Nicolics, F. Wenzl, W. Nemitz, S. Schweitzer, P. Schweitzer:
    "Influence of Electrode Structure on Thermal Performance of High Power LED";
    Vortrag: 38th International Spring Seminar on Electronics Technology-ISSE 2015, Eger, Hungary; 01.05.2015 - 02.05.2015; in: "Book of Abstracts", Budapest University of Technology and Economics, (2015), ISBN: 978-963-313-177-0; S. 96 - 97.
  732. P.L. Fulmek, J. Nicolics, G.A. Reider:
    "Demagnetizing Experiments of Yttrium Orthoferrites for Large Aperture Magnetooptical Switch";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Budapest, Hungary; 07.05.2008 - 11.05.2008; in: "ISSE 2008 Conference Proceedings", (2008), ISBN: 978-963-06-4915-5; S. 251 - 256.
  733. P.L. Fulmek, J. Nicolics, R. Glatz, S. Skerlan, M. Siegele:
    "Thermal Investigation of a Gas Sensor Heater Element using High-Resolution Thermography";
    Vortrag: The 13th Mechatronics Forum International Conference, Linz; 17.09.2012 - 19.09.2012; in: "Conference Proceedings", (2012), S. 366 - 372.
  734. P.L. Fulmek, W. Nemitz, F. Wenzl, S. Schweitzer, P. Hartmann, J. Nicolics:
    "Simulation Based Experimental Study of the Temperature and Power Density Distribution in a High-Power LED";
    Vortrag: 38th International Spring Seminar on Electronics Technology-ISSE 2015, Eger, Hungary; 06.05.2015 - 10.05.2015; in: "Proceedings", Budapest University of Technology and Economics, (2015), ISBN: 978-963-313-177-0; S. 179 - 182.
  735. P.L. Fulmek, N. Mehboob, P. Haumer, M. Kriegisch, R. Grössinger:
    "Magnetic characterisation of industrial high strength steels";
    Poster: Soft Magnetic Materials (SMM 19), Torino, Italy; 06.09.2009 - 09.09.2009; in: "Book of Abstracts", (2009), S. B1-16.
  736. P.L. Fulmek, G. Holler, H. Wegleiter, B. Schweighofer, P. Haumer:
    "Magnetic Accomodation in NiZn-Ferrites";
    Poster: International Symposium on Electric and Magnetic Fields, Mondovi, Italy; 26.05.2009 - 29.05.2009; in: "EMF 2009 - Book of Summaries", (2009), ISSN: 2030-546x; S. 137 - 138.
  737. P.L. Fulmek, G. Holler, H. Wegleiter, B. Schweighofer, P. Haumer:
    "Measurement of Magnetic Accommodation in NiZn-Ferrite";
    Poster: 8th International Symposium on Electric and Magnetic Fields (EMF 2009), Mondovi, Italy; 26.05.2009 - 29.05.2009; in: "EMF Book of Summaries", (2009), ISSN: 2030-546x; S. 137 - 138.
  738. P.L. Fulmek, H. Hauser, G. Steiner, P. Haumer:
    "Magnetic Modelling of Continuously Variable Transformers";
    Vortrag: 5th International Symposium on Hysteresis Modeling and Micromagnetics (HMM 2005), Budapest, Hungary; 30.05.2005 - 01.06.2005; in: "Book of Abstracts", (2005), ISBN: 963-420834-7; S. 243 - 244.
  739. P.L. Fulmek, H. Hauser:
    "Directional Dependence of Hysteresis Loops of Anisotropic Materials Calculated by Statistic Domain Behaviour";
    Poster: Int. Symposium on Non-Linear Electromagnetic Systems (ISEM 95), Cardiff, Great Britain; 10.09.1995 - 20.09.1995; in: "Nonlinear Electromagnetic Systems; Studies in Applied Electromagnetics and Mechanics", A.J. Moses, A. Basak (Hrg.); IOS Press, Amsterdam, 10 (1996), ISBN: 90-5199-251-3; S. 612 - 615.
  740. P.L. Fulmek, H. Hauser:
    "Energetic Model of Ferromagnetic Hysteresis: Magnetization of Grain Oriented Steel Sheets in Asymmetric Directions";
    Vortrag: Int. Workshop on Two-Dimensional Magnetization Problems, Grenoble, France (eingeladen); 29.09.1997 - 30.09.1997; in: "EDP Sciences", (1998), ISBN: 2-86883-385-3; S. 17 - 31.
  741. P.L. Fulmek, H. Hauser:
    "Magnetization Reversal and Small Lancettes Calculated by Statistic Domain Behaviour";
    Poster: 40th Annual Conference on Magnetism and Magnetic Materials (MMM 95), Philadelphia, USA; 06.11.1995 - 09.11.1995; in: "Journal of Applied Physics 79", (1996), S. 5761.
  742. P.L. Fulmek, P. Haumer, F. Wenzl, W. Nemitz, R. Beigelbeck, J. Nicolics:
    "An Advanced Parametric Thermal Model for High Power LED Modules";
    Vortrag: AMA Conferences 2017 - SENSOR 2017 and IRS² 201, Nürnberg, D; 30.05.2017 - 01.06.2017; in: "Proceedings AMA 2017 - Sensor 2017", (2017), 6 S.
  743. P.L. Fulmek, P. Haumer, M. Kriegisch, R. Grössinger:
    "Frequency dependent magnetic properties of industrial high strenght steels";
    Poster: Soft Magnetic Materials (SMM 19), Torino, Italy; 06.09.2009 - 09.09.2009; in: "Book of Abstracts", (2009), S. B1-23.
  744. P.L. Fulmek, P. Haumer, G. Holler:
    "Hysteresis Modelling of NiZn-Ferrites";
    Poster: 31st International Spring Seminar on Electronics Technology (ISSE 2008), Budapest, Hungary; 07.05.2008 - 11.05.2008; in: "Conference Proceedings", (2008), ISBN: 978-1-4244-3974-4; S. 670 - 675.
  745. P.L. Fulmek, P. Haumer, I. Atassi, B. Schweighofer, H. Wegleiter:
    "Magnetic DC-Properties of LTCC-Ferrite Material";
    Vortrag: SMM20, 20th International Conference on Soft Magnetic Materials, Kos Island, Greece; 18.09.2011 - 22.09.2011; in: "Book of Abstracts", (2011), ISBN: 978-960-9534-14-7; S. 239.
  746. P.L. Fulmek, P. Haumer:
    "Energetic Model of Ferromagnetic Hysteresis";
    Vortrag: International Symposium on Electric and Magnetic Fields, Mondovi, Italy; 26.05.2009 - 29.05.2009; in: "EMF 2009 - Book of Summaries", (2009), ISSN: 2030-546x; S. 29 - 30.
  747. P.L. Fulmek, P. Haumer:
    "Evaluation of BH-Loops from Inductive Measurements by Numerical Simulation";
    Poster: 10th European Conference on Magnetic Sensors and Actuators (EMSA 2014), Wien; 06.07.2014 - 09.07.2014; in: "Book of Abstracts: 10th European Conference on Magnetic Sensors and Actuators", (2014), ISBN: 978-3-85465-021-8.
  748. P.L. Fulmek, G. Brasseur, St. Cermak, F. Wandling:
    "Capacitive Sensor for Relative Angle Measurement";
    Vortrag: IMTC IEEE Conference on Instrumentation and Measurement Technology, Baltimore Hilton and Towers, Maryland, USA; 01.05.2000 - 04.05.2000; in: "IEEE Conference Proceedings on Instrumentation and Measurement Technology", (2000).
  749. T. Frischmuth, M. Schneider, D. Maurer, Th. Grille, U. Schmid:
    "Impact of thermal treatment on the residual stress and Young´s modulus of thin a-SiC:H membranes applying bulge testing";
    Vortrag: Eurosensors XXIX, Freiburg, D; 06.10.2015 - 09.10.2015; in: "Proceedings of Eurosensors XXIX", Procedia Engineering, Vol. 120 (2015), ISSN: 1877-7058; S. 752 - 755.

    Zusätzliche Informationen
  750. T. Frischmuth, M. Schneider, Th. Grille, U. Schmid:
    "Effect of Reactive Gas Flow Ratio on IC-PECVD Deposited a-SiC:H Thin Films";
    Poster: EUROSENSORS 2014 - 28th European Conference on Solid-State Transducers, Brescia, I; 07.09.2014 - 10.09.2014; in: "Procedia Engineering", Elsevier, 87 (2014), ISSN: 1877-7058; S. 128 - 131.

    Zusätzliche Informationen
  751. T. Frischmuth, M. Schneider, Th. Grille, U. Schmid:
    "FT-IR analysis of high temperature annealing effects in a-SiC:H thin films";
    Vortrag: SPIE Microtechnologies 2017, Barcelnoa, Spanien; 08.05.2017 - 10.05.2017; in: "Proc. SPIE 10246, Smart Sensors, Actuators, and MEMS VIII", SPIE, (2017), ISSN: 1996-756x; Paper-Nr. 102460R, 6 S.

    Zusätzliche Informationen
  752. T. Frischmuth, D. Maurer, M. Schneider, Th. Grille, U. Schmid:
    "IMPACT OF SUBSTRATE TEMPERATURE AND INDUCTIVELY COUPLED PLASMA POWER ON a-SiC:H THIN FILM PROPERTIES";
    Vortrag: MME 2015 - 26th MicroMechanics Europe Workshop, Toledo, Spanien; 20.09.2015 - 23.09.2015; in: "MME 2015 - 26th MicroMechanics Europe Workshop", (2015).

    Zusätzliche Informationen
  753. T. Frischmuth, A. Klein, M. Schneider, Th. Grille, U. Schmid:
    "Fracture analysis of a-SiC:H membranes after thermal annealing";
    Poster: 30th Eurosensors Conference, EUROSENSORS 2016, Budapest, Hungary; 04.09.2016 - 07.09.2016; in: "Proceedings of the Eurosensors 2016", Procedia Engineering / Elsevier, 168 (2016), ISSN: 1877-7058; S. 1164 - 1167.

    Zusätzliche Informationen
  754. T. Frischmuth, D. Dergez, M. Stübegger, U. Hedenig, Th. Grille, U. Schmid:
    "Influence of High Temperature Annealings on a-SiC:H Thin Film Properties";
    Vortrag: Smart Systems Integration (SSI) 2014, Wien; 26.03.2014 - 27.03.2014; in: "Smart Systems Integration", Apprimus Verlag, Aachen, (2014), ISBN: 978-3-86359-201-1; S. 475 - 478.

    Zusätzliche Informationen
  755. T. Frischmuth, W.H. Buchegger, M. Kraft, M. Vellekoop:
    "Squeezed microfluidic droplet creation with a T-junction and a flow focusing device at very low flow rates";
    Poster: Informationstagung Mikroelektronik (ME), Wien; 23.04.2012 - 24.04.2012; in: "Tagungsband zur Informationstagung 2012", (2012), ISBN: 978-3-85133-071-7; 4 S.
  756. M. Franz, M. Weilguni:
    "Life Cycle Inventories of LTCC Substrates";
    Vortrag: ISSE 2011, Tatranska Lomnica, Slovakia; 11.05.2011 - 13.05.2011; in: "Proceedings of the 2011 34th International Spring Seminar on Electronics Technology", IEEE, (2011), ISBN: 978-1-4577-2112-0; S. 509 - 514.

    Zusätzliche Informationen
  757. M. Franz, M. Unger, H. Stahr, M. Morianz, R. Kollmann:
    "Environmental Aspects of New Embedded Power Modules with 500 W and 50 kW";
    Vortrag: 40th International Spring Seminar on Electronics Technology - ISSE 2017, Sofia, Bulgarien; 11.05.2017 - 14.05.2017; in: "IEEE Proc. of ISSE 2017", (2017), ISBN: 978-1-5386-0582-0; Paper-Nr. A06, 2 S.
  758. M. Franz, M. Unger:
    "Comparative Environmental Assessment for an Improved Rear Camera System";
    Poster: 41st International Spring Seminar on Electronics Technology, "Research and Development Tendencies in Advanced Electronics Technologies", Zlatibor, Serbia; 16.05.2018 - 20.05.2018; in: "ISSE 2018, Extended Abstracts", (2018), ISBN: 9788660220426; S. 146 - 147.
  759. M. Franz, S. Lüftl, A. Maric, I. Atassi, N. V. Blaz, M. Hrovat, K. Makarovic, G. Radosavljevic:
    "Characterization of Ferrite LTCC Tapes";
    Poster: 36th International Spring Seminar on Electronics Technology - ISSE 2013, Alba Iulia, Romania; 08.05.2013 - 12.05.2013; in: "Book of Abstracts", (2013), ISBN: 978-606-613-064-6; S. 14 - 15.
  760. M. Franz, T. Kupka, G. Schmid, J. Nicolics:
    "Greenhouse Gas Emissions of Printed Circuit Board Manufacturing of Different Technologies";
    Vortrag: 42nd International Spring Seminar on Electronics Technology - ISSE2019, Wroclaw, Polen; 15.05.2019 - 19.05.2019; in: "42nd International Spring Seminar on Electronics Technology", (2019), ISBN: 978-83-7493-070-3; S. 151 - 152.

    Zusätzliche Informationen
  761. M. Franz, I. Atassi, A. Maric, B. Balluch, M. Weilguni, W. Smetana, C. Kluge, G. Radosavljevic:
    "Material Characteristics of the LTCC Base Material CeramTape GC";
    Poster: 35th International Spring Seminar on Electronics Technology (ISSE 2012), Bad Aussee; 09.05.2012 - 13.05.2012; in: "Book of Abstracts", (2012), ISBN: 978-3-85465-015-7; S. 218 - 219.
  762. F. Franek, T. Zika, A. Pauschitz:
    "Analyses of rolling bearing raceways with focus on failures due to electric current";
    Vortrag: Failures Of Rolling Bearings, Bratislava; 21.10.2010 - 22.10.2010; in: "FAILURES OF ROLLING BEARINGS - Proceedings", (2010), S. 18 - 21.

    Zusätzliche Informationen
  763. F. Franek, G. Vorlaufer, G. Zehethofer:
    "Aufgaben der Simulation in der Tribotechnik";
    Vortrag: ÖTG-Symposium 2007, St. Pölten; 22.11.2007; in: "RELIABILITY ENGINEERING - Simulation und Monitoring von verschleißgefährdeten Systemen", (2007), ISBN: 978-3-901657-28-3; S. 7 - 25.

    Zusätzliche Informationen
  764. F. Franek, G. Vorlaufer, A. Stadler, M. Jech, T. Wopelka:
    "Modelling And Simulation Assisted Tribometrology";
    Vortrag: 6th International Conference on Tribology June 2008 - Balkantrib '08, Sofia, Bulgarien; 12.06.2008 - 14.06.2008; in: "Balkantrib '08", (2008), S. BT-094-1 - BT-094-10.

    Zusätzliche Informationen
  765. F. Franek, G. Vorlaufer, W. Edelbauer, S. Bukovnik:
    "SIMULATION OF TRIBOSYSTEMS AND TRIBOMETROLOGY";
    Hauptvortrag: Serbiatrib '07 - 10th International Conference on Tribology, Kragujevac, Srbija; 20.06.2007 - 21.06.2007; in: "SERBIATRIB '07", (2007), S. 15 - 24.

    Zusätzliche Informationen
  766. F. Franek, K. Steinschütz, C. Lenauer, C. Besser, N. Dörr, M. Jech:
    "Der Einfluss auf das Alterungsverhalten von Motorölen durch die künstliche Alterung mit Ethanol-Verbrennungsprodukten";
    Vortrag: 52. Tribologie-Fachtagung - GfT, Göttingen, D; 26.09.2011 - 28.09.2011; in: "Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen - Band I + II", Gesellschaft für Tribologie e.V., (2011), ISBN: 978-3-00-035439-7; S. 63/1 - 63/6.

    Zusätzliche Informationen
  767. F. Franek, A. Pauschitz, P. Kelman:
    "Tribologisches System des Hüftgelenkes - Simulationsversuche und Übertragungsmöglichkeiten";
    Vortrag: Symposium Nr. 20433/68.405 "Tribologie des künstlichen Gelenkersatzes", Osfildern; 10.01.1996; in: "Symposium Nr. 20433/68.405 "Tribologie des künstlichen Gelenkersatzes"", W.J. Bartz (Hrg.); Medizin. Techn. Akademie Esslingen, Ostfildern (D) (1996), S. 89 - 100.
  768. F. Franek, A. Pauschitz, P. Kelman:
    "Tribologisches System des Hüftgelenkes - Simulationsversuche und Übertragungsmöglichkeiten";
    Vortrag: 10th International Colloquium "Tribology - Solving Friction and Wear Problems", TAE, Ostfildern (D); 09.01.1996 - 11.01.1996; in: "Tribology - Solving Friction and Wear Problems, Band/Vol. 2", W.J. Bartz (Hrg.); TAE - Technische Akademie Esslingen, Ostfildern (1996), S. 1495 - 1504.
  769. F. Franek, A. Pauschitz, E. Gerhard:
    "Präventives Qualitätsmanagement durch Tribotechnik und angewandte Sensorik";
    Vortrag: ÖTG-Symposium 1998, Wien, Ö; 03.12.1998; in: "Tagungsband zum ÖTG-Symposium 1998", F. Franek (Hrg.); Österreichische Tribologische Gesellschaft, (1998), S. 3 - 18.
  770. F. Franek, A. Pauschitz, N. Dörr, G Polt:
    "Applied Research Activities at the Austrian Center of Competence for Tribology";
    Vortrag: 15th international colloquium tribology "Automotive and Industrial Lubrication", Ostfildern, Germany; 17.01.2006 - 19.01.2006; in: "15th international colloquium tribology - Automotive and Industrial Lubrication - Book of Synopses 2006", TAE, (2006), ISBN: 3-924813-62-0.

    Zusätzliche Informationen
  771. F. Franek, A. Pauschitz, W.J. Bartz:
    "Activities of Applied Research at the Austrian Center of Competence for Tribology";
    Hauptvortrag: 17th International Colloquium Tribology, Ostfildern, D; 19.01.2010 - 21.01.2010; in: "Solving Friction and Wear Problems", Technische Akademie Esslingen, Ostfildern, (2010), ISBN: 3-924813-80-9.

    Zusätzliche Informationen
  772. F. Franek, A. Pauschitz, G. Abraham:
    "Layers formed by boundary lubrication - Detection by means of HF-impedance measurement";
    Vortrag: 1st Asia International Conference on Tribology, Beijing, P.R.China; 12.10.1998 - 15.10.1998; in: "Proceedings of the 1st Asia International Conference on Tribology", Tsinghua University Press, Volume 2 (1998), S. 386 - 393.
  773. F. Franek, A. Pauschitz:
    "Austrian Center of Competence for Tribology - A New Approach to Tribology R&D-Services for the Industry";
    Vortrag: 3rd Aimeta International Tribology Conference, Salerno, Italy; 18.09.2002 - 20.09.2002; in: "Abstracts of Papers from 3rd Aimeta International Tribology Conference", V. d´ Agostino, S. Della Valle (Hrg.); (2002), S. 19.
  774. F. Franek, A. Pauschitz:
    "F+E Dienstleistungen der AC²T research GmbH";
    Vortrag: Kooperation NANO '05, Wiener Neustadt; 19.10.2005 - 20.10.2005; in: "CD-ROM Vorträge Kooperation Nano 05", (2005), 19 S.
  775. F. Franek, A. Pauschitz:
    "Friction and wear properties of nano-particle coated aluminium";
    Vortrag: Symposium on Lubricating Materials and Tribochemistry, Lanzhou; P.R.China; 16.10.1998 - 20.10.1998; in: "Proceedings of Symposium on Lubricating Materials and Tribochemistry", Laboratory of Solid Lubrication - Lanzhou Institute of Chemical Physics, Lanzhou (1998), S. 173 - 180.
  776. F. Franek, A. Pauschitz:
    "Investigation of tribological relevant parameters of porous sliding elements";
    Vortrag: VI. Tribological Conference, Budapest; 06.07.1996 - 07.07.1996; in: "Proceedings", (1996), S. 7 - 19.
  777. F. Franek, A. Pauschitz:
    "K Plus - Austrian Center for Tribology";
    Vortrag: 13th International Colloquium Tribology, Esslingen, Deutschland; 15.01.2002 - 17.01.2002; in: "Lubricants, Materials and Lubrication Engineering", W.J. Bartz (Hrg.); Die Deutsche Bibliothek, Esslingen, Ostfildern (2002), ISBN: 3-924813-48-5; S. 3 - 10.
  778. F. Franek, A. Pauschitz:
    "Life Time Estimations of Miniature Bearings";
    Vortrag: 2000 AIMETA International Tribology Conference, L'Aquila (I); 20.09.2000 - 22.09.2000; in: "Proceedings of the first 2000 AIMETA International Tribology Conference", R. Bassani, T. Raparelli, F. Vatta (Hrg.); AIMETA Group Italy, (2000), S. 339 - 346.
  779. F. Franek, A. Pauschitz:
    "Metallische und polymere Gleitelemente am Beispiel ausgewählter tribologischer Untersuchungen";
    Vortrag: Selbstschmierende und wartungsfreie Gleitlager, Ostfildern/Esslingen, Deutschland (eingeladen); 13.12.2006 - 15.12.2006; in: "Selbstschmierende und wartungsfreie Gleitlager", TAE, Lehrgang 32507/ 68.722 (2006), 25 S.

    Zusätzliche Informationen
  780. F. Franek, A. Pauschitz:
    "Schmierwirksamkeit physiologisch und ökologisch unbedenklicher Schmierstoffe in der Medizintechnik";
    Vortrag: TAE-Lehrgang "Ökologische und ökonomische Aspekte bei Schmierstoffen", Ostfildern, D (eingeladen); 20.11.1996 - 22.11.1996; in: "Ökologische und ökonomische Aspekte bei Schmierstoffen", W.J. Bartz (Hrg.); TAE - Technische Akademie Esslingen, Ostfildern (1996), S. 1 - 21.
  781. F. Franek, A. Pauschitz:
    "Schmierwirksamkeit physiologisch und ökologisch unbedenklicher Schmierstoffe in der Medizintechnik";
    Vortrag: TAE-Lehrgang "Ökologische und ökonomische Aspekte bei Schmierstoffen", Technische Akademie Esslingen, Ostfildern, D (eingeladen); 25.11.1998 - 27.11.1998; in: "Ökologische und ökonomische Aspekte bei Schmierstoffen", W.J. Bartz (Hrg.); TAE - Technische Akademie Esslingen, Ostfildern (1998), S. 1 - 21.
  782. F. Franek, A. Pauschitz:
    "Sinter- und Kunststoffgleitelemente am Beispiel ausgewählter tribologischer Untersuchung";
    Vortrag: TAE-Lehrgang "Selbstschmierende und wartungsfreie Gleitlager", Ostfildern, D; 13.11.2002 - 15.11.2002; in: "Selbstschmierende und wartungsfreis Gleitlager", W.J. Bartz (Hrg.); TAE-Technische Akademie Esslingen, Ostfildern (2002), S. 1 - 19.
  783. F. Franek, A. Pauschitz:
    "Sinter- und Kunststoffgleitelemente am Beispiel ausgewählter tribologischer Untersuchungen";
    Vortrag: TAE-Lehrgang "Selbstschmierende und wartungsfreie Gleitlager", Ostfildern, D (eingeladen); 06.11.1996 - 08.11.1996; in: "Selbstschmierende und wartungsfreie Gleitlager", W.J. Bartz (Hrg.); TAE-Technische Akademie Esslingen, Ostfildern (1996), S. 1 - 20.
  784. F. Franek, A. Pauschitz:
    "Sinter- und Kunststoffgleitelemente am Beispiel ausgewählter tribologischer Untersuchungen";
    Vortrag: 11th International Colloquium Tribology, Ostfildern, D (eingeladen); 13.01.1998 - 15.01.1998; in: "Tribology - Solving Friction and Wear Problems, Vol. II", W.J. Bartz (Hrg.); TAE - Technische Akademie Esslingen, Ostfildern (1998), S. 825 - 838.
  785. F. Franek, A. Pauschitz:
    "Sinter- und Kunststoffgleitelemente am Beispiel ausgewählter tribologischer Untersuchungen";
    Vortrag: TAE-Lehrgang "Selbstschmierende und wartungsfreie Gleitlager", Ostfildern, D (eingeladen); 09.11.1998 - 11.11.1998; in: "Selbstschmierende und wartungsfreie Gleitlager", W.J. Bartz (Hrg.); TAE - Technische Akademie Esslingen, Ostfildern, (1998), S. 1 - 20.
  786. F. Franek, A. Pauschitz:
    "Strassenbenützungskosten aus tribologischer Sicht";
    Vortrag: ÖTG-Symposium 1996, Wien; 24.10.1996; in: "Tribologie rund um das KFZ", F. Franek (Hrg.); ÖTG - Österr. Tribolog. Gesellschaft, Wien (1996), S. 39 - 52.
  787. F. Franek, A. Neuhaus, M Reichart, A Hammerschmid:
    "Mechatronical systems and experimental methods for investigations on tribology of electrical contacts";
    Vortrag: 2nd International Conference Mechatronic Systems and Materials - MSM2006, Cracow, Poland (eingeladen); 31.08.2006 - 03.09.2006; in: "2nd International Conference Mechatronic Systems and Materials - Proceedings", (2006), ISBN: 83-88492-62-4.

    Zusätzliche Informationen
  788. F. Franek, M. Jech, T. Wopelka:
    "Wirkung und Verschleiß von Werkstoffen bzw. Oberflächen für Zylinderlaufbuchsen im Modelltribometerversuch";
    Vortrag: 49. Tribologie Fachtagung - Reibung Schmierung und Verschleiß: Forschung und praktische Anwendung, Göttingen, Deutschland; 22.09.2008 - 24.09.2008; in: "49. Tribologie Fachtagung", Band II (2008), ISBN: 978-3-00-025676-9; S. 37/1 - 37/8.

    Zusätzliche Informationen
  789. F. Franek, S. Ilo, C. Just, S. Krenn, E. Badisch:
    "Verschleiß und Reibung im feucht-abrasiven System";
    Vortrag: 51. Tribologie-Fachtagung, Göttingen, D; 27.09.2010 - 29.09.2010; in: "Reibung, Schmierung und Verschleiß", Gesellschaft für Tribologie e.V., (2010), ISBN: 978-3-00-032180-1.

    Zusätzliche Informationen
  790. F. Franek, S. Ilo, E. Badisch:
    "Using load and temperature response wear maps in un lubricated sliding of steels";
    Vortrag: Leeds-Lyon Symposium 2010, Leeds; 07.09.2010 - 10.09.2010; in: "Tribology for Sustainability - Economic, Environmental and Quality of Life", (2010).

    Zusätzliche Informationen
  791. F. Franek, N. Dörr, A. Vernes, C. Katsich, G Trausmuth:
    "Some Selected Tribological Basics/Fundamentals for Practical Applications - Characterisation and Simulation of Tribocontacts";
    Hauptvortrag: 19th International Colloquium - Tribology - Industrial and Automotive Lubrication, Stuttgart, D; 21.01.2014 - 23.01.2014; in: "Tribology - Industrial and Automotive Lubrication - Book of Synopses 2014", TAE, (2014), ISBN: 978-3-943563-10-8; S. 1 - 8.

    Zusätzliche Informationen
  792. F. Franek, N. Dörr, J. Felkel:
    "Analytical Methods for Characterisation of Novel Fuels and Lubricants - a Critical Review";
    Vortrag: International Conference Tribology of Alternative Fuels and Ecolubricants, Wr. Neustadt, A; 29.05.2006 - 31.05.2006; in: "Tribology of Alternative Fuels and Ecolubricants", ÖTG, (2006), ISBN: 3-901657-21-5; S. 23 - 24.

    Zusätzliche Informationen
  793. F. Franek, P. Dasic, M. Radovanovic, E. Assenova:
    "Status of International Organizations and Standardization in Field of Tribology";
    Vortrag: RaDMI 2002, Vrnjacka Banja, Yugoslavia; 01.09.2002 - 04.09.2002; in: "Research and Development in Mechanical Industriy", P. Dasic, M. Radovanovic (Hrg.); GIP "BONA FIDES" Nis, 1 (2002), ISBN: 86-83803-04-x; S. 11 - 20.
  794. F. Franek, E. Badisch, A. Merstallinger:
    "Research on Tribology Systems under Special Conditions - Hot and Vacuum Tribology";
    Hauptvortrag: 18th International Colloquium - Tribology - Industrial and Automotive Lubrication, Stuttgart, D (eingeladen); 10.01.2012 - 12.01.2012; in: "Tribology - Industrial and Automotive Lubrication - Book of Synopses 2012", TAE, (2012), ISBN: 3-924813-97-3; 9 S.

    Zusätzliche Informationen
  795. F. Franek, E. Badisch, M. Kirchgaßner:
    "Advanced Methods for Characterisation of Abrasion/Erosion Resistance of Wear Protection Materials";
    Hauptvortrag: 11th International Conference on Tribology - Serbiatrib '09, Belgrade, Serbia (eingeladen); 13.05.2009 - 15.05.2009; in: "11th International Conference on Tribology - Serbiatrib `09 - Proceedings", Serbian Tribology Society and Faculty of Mechanical Engineering, (2009), ISBN: 978-86-7083-659-4; S. 27 - 36.

    Zusätzliche Informationen
  796. F. Franek:
    "Analysis and Testing of Miniature Motors for Precision Engineering";
    Vortrag: NATO-ASI-Worksh. "Fundamentals of Tribology a. Bridging the Gap Betw. the Macro- and Micro/Nano, Keszthely (H) (eingeladen); 13.08.2000 - 25.08.2000; in: "Fundamentals of Tribology and Bridging the Gap Betw. the Macro- and Micro/Nanoscales", M. Buday (Hrg.); Logod Bt., Budapest (2000), ISBN: 9630040778; S. 100.
  797. F. Franek:
    "Austrian Center of Competence for Tribology - a Nucleus for Interdisciplianary Research";
    Vortrag: Review Conference on the scientific cooperation between Austria, Poland and their world-wide partners, Wien; 23.04.2004 - 27.04.2004; in: "Tribology Science and Application", M. Herman, F. Franek, C. Kajdas (Hrg.); (2004), ISBN: 83-88443-61-5; S. 469 - 487.
  798. F. Franek:
    "Bionics Aspects In Tribology - Tribo-Bionics";
    Hauptvortrag: 6th International Conference on Tribology June 2008 - Balkantrib '08, Sofia, Bulgarien (eingeladen); 12.06.2008 - 14.06.2008; in: "Balkantrib '08", (2008), S. BT-PP6-1 - BT-PP6-10.

    Zusätzliche Informationen
  799. F. Franek:
    "Bionik.Aufgaben in der Tribologie";
    Vortrag: BIONIK - BiologInnen und TechnikerInnen schauen sich über die Schulter, Wien (eingeladen); 24.09.2008 - 25.09.2008; in: "BIONIK - BiologInnen und TechnikerInnen schauen sich über die Schulter", (2008).

    Zusätzliche Informationen
  800. F. Franek:
    "Some Tribological Aspects In Automotive Engineering And Traffic";
    Vortrag: Balttrib' 2013, Kaunas, Lithuania (eingeladen); 14.11.2013 - 15.11.2013; in: "Balttrib' 2013 - VII International Scientific Conference - PROCEEDINGS", (2013), ISSN: 1822-8801; S. 135 - 140.

    Zusätzliche Informationen
  801. F. Franek:
    "Tribologie";
    Vortrag: Professional MBA Industrial Engineering, Wr. Neustadt, Austria; 01.05.2006 - 31.05.2006; in: "Professional MBA Industrial Engineering - Modul 9 - Tribologie", (2006), 80 S.

    Zusätzliche Informationen
  802. F. Franek:
    "Tribologie in Technik, Organisation und Gesellschaft";
    Vortrag: Alpbacher Technologiegespräche, Alpbach (eingeladen); 26.08.2010 - 28.08.2010; in: "Tribologie - unterschiedliche Betrachtungen von Reibung und VerschleiR", (2010), S. 20 - 21.

    Zusätzliche Informationen
  803. F. Franek:
    "Tribology - A Key Technology For The Mobility Sector";
    Hauptvortrag: ÖTG Symposium 2012 - Tribologie und Mobilität, Dornbirn, V; 15.11.2012; in: "ÖTG SYMPOSIUM 2012 - TRIBOLOGIE und MOBILITÄT", Österreichische Tribologische Gesellschaft, (2012), ISBN: 978-3-901657-37-5; S. 3 - 18.
  804. F. Franek:
    "Tribology Activities in Austria";
    Hauptvortrag: ECOTRIB 2007, Ljubljana, Slovenia; 12.06.2007 - 15.06.2007; in: "ECOTRIB '07", Slovenian Society for Tribology, Volume II (2007), ISBN: 978-961-90254-8-2; S. 1175 - 1178.

    Zusätzliche Informationen
  805. F. Franek:
    "Tribology Activities In Austria - Update 2011";
    Vortrag: ECOTRIB 2011 - 3rd European Conference on Tribology, Wien; 07.06.2011 - 09.06.2011; in: "ECOTRIB '11 - 3rd European Conference on Tribology", OeTG - Österreichische Tribologische Gesellschaft, (2011), ISBN: 978-3-901657-38-2; S. 945 - 950.

    Zusätzliche Informationen
  806. F. Franek:
    "TRIBOLOGY ACTIVITIES IN AUSTRlA";
    Vortrag: ECOTRIB 2009 - 2nd European Conference on Tribology, Pisa, I; 07.06.2009 - 10.06.2009; in: "ECOTRIB '09 - 2nd European Conference on Tribology", University of Pisa, (2009), ISBN: 978-884672426-7; S. 1065 - 1070.

    Zusätzliche Informationen
  807. F. Franek:
    "Tribology Aspects in Road Pricing Concepts";
    Vortrag: 7th International Conference on Tribology, Budapest (eingeladen); 04.09.2000 - 05.09.2000; in: "Proceedings 7th International Conference on Tribology", M. Kozma (Hrg.); Budapest University of Technology and Economics, Budapest (2000), S. 43 - 54.
  808. H. Frais-Kölbl, H. Hauser, M. Franz:
    "AC and DC measurements of ferroelectric materials";
    Poster: Electrical Electronics Insulation Conference and Electrical Manufacturing & Coil Winding Conference, 1995, Rosemont, Illinois, USA; 18.09.1995 - 21.09.1995; in: "Conference Proceedings", (1995), ISBN: 0-941783-15-4; S. 213 - 216.
  809. H. Frais-Kölbl, H. Hauser:
    "Characterization of Video Recording Heads";
    Poster: Int. Symposium on Non-Linear Electromagnetic Systems (ISEM), Braunschweig, Germany; 12.05.1997 - 14.05.1997; in: "Non-Linear Electromagnetic Systems - Studies in Applied Electromagnetics and Mechanics", V. Kose, J. Sievert (Hrg.); IOS Press, Amsterdam (1998), ISBN: 90-5199-381-1; S. 795 - 798.
  810. H. Frais-Kölbl, H. Hauser:
    "Electromagnetic Characterization of Sandwich Video-Heads";
    Poster: Int. Conference on Magnetism (ICM 97), Cairns, Australia; 27.07.1997 - 01.08.1997; in: "ICM 97 - Abstracts", (1997), S. G348.
  811. M. Fischeneder, M. Oposich, M. Schneider, U. Schmid:
    "Aktive Q-Faktor Regelung von piezoelektrischen MEMS Cantilevern für High Speed AFM Anwendungen in Vakuum";
    Vortrag: MikroSystemTechnik Kongress 2017, München, Deutschland; 23.10.2017 - 25.10.2017; in: "MikroSystemTechnik Kongress 2017 - Proceedings", VDE Verlag GMBH, (2017), ISBN: 978-3-8007-4491-6; S. 112 - 115.

    Zusätzliche Informationen
  812. M. Fischeneder, M. Oposich, M. Schneider, U. Schmid:
    "Tuneable Q-Factor of MEMS Cantilevers with Integrated Piezoelectric Thin Films";
    Vortrag: Eurosensors 2017, Paris, Frankreich; 03.09.2017 - 06.09.2017; in: "Proceedings of Eurosensors 2017, Paris", MDPI, Vol. 1/ Iss. 4 (2017), ISSN: 2504-3900; S. 1 - 5.

    Zusätzliche Informationen
  813. M. Filipovic, Z. Jaksic, J. Matovic:
    ""Nano-Shrinkwrap" Approach To Using Nanomembranes As Injectable External Cuff Electrodes For Plasmon-Based Readout of Neural Activity";
    Vortrag: 3rd Mediterranean Conference on Nanophotonics - MediNano-3, Belgrade, Serbia; 18.10.2010 - 19.10.2010; in: "Proc. Abstr. 3rd Mediterranean Conference on Nanophotonics MediNano-3", (2010).
  814. G. Fercher, W. Smetana, M. Vellekoop:
    "Contactless Conductivity Detection in LTCC Technology";
    Poster: Informationstagung Mikroelektronik 08 (ME2008), Wien; 15.10.2008 - 16.10.2008; in: "Tagungsband zur Informationstagung Mikroelektronik 2008", (2008), ISBN: 978-3-85133-049-6; S. 160 - 163.
  815. G. Fercher, W. Smetana, M. Vellekoop:
    "Contactless Conductivity Detection in LTCC Technology for Microchip Electrophoresis";
    Poster: The 12th International Conference on Miniaturized Systems for Chemistry and Life Science (μTAS 2008), San Diego, CA, USA; 12.10.2008 - 16.10.2008; in: "The Proceedings of the μTAS 2008", (2008), ISBN: 978-0-9798064-1-4; S. 916.
  816. G. Fercher, W. Smetana, M. Vellekoop:
    "Design of a Contactless Conductivity Detector in LTCC technology";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Budapest, Hungary; 07.05.2008 - 11.05.2008; in: "Abstract Proceedings - Reliability and Life-time Prediction", (2008), ISBN: 978-963-06-4915-5; S. 164 - 165.
  817. G. Fercher, W. Smetana, M. Vellekoop:
    "Differential contactless conductivity measurement for on-chip capillary electrophoresis";
    Vortrag: Workshop on MicroMechanics Europe (MME), Toulose, France; 20.09.2009 - 22.09.2009; in: "Proceedings of the MME 2009", (2009), S. C28-1 - C28-4.
  818. G. Fercher, W. Smetana, M. Vellekoop:
    "Robust Ceramic Capillary Electrophoresis Analysis Device";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Brno, Czech Republic; 13.05.2009 - 17.05.2009; in: "Abstract Proceedings", (2009), ISBN: 978-80-214-3874-3; S. 146 - 147.
  819. G. Fercher, H. Homolka, W. Smetana, M. Vellekoop:
    "A Concept of a Microfluidic Device Realized in LTCC Technology for the Contactless Conductivity measruement of Ion Concentrations";
    Vortrag: Workshop on MicroMechanics Europe (MME), Guimaraes, Portugal; 16.09.2007 - 18.09.2007; in: "Book of Abstracts - 18th Workshop on MicroMechanics Europe, MME 2007", (2007), ISBN: 978-972-98603-3-1; S. 349 - 352.

    Zusätzliche Informationen
  820. G. Fercher, H. Homolka, W. Smetana, M. Vellekoop:
    "Contactless Conductivity Measurement of Ion Concentrations in Aqueous Solutions";
    Vortrag: Einsteins in the City, New York, USA; 30.10.2007 - 31.10.2007; in: "Einsteins in the City - Abstracts", (2007), S. 7.4.
  821. T. Fellner, W. Smetana, H. Hauser:
    "A Model Describing Low K Thick Film Dielectrics";
    Vortrag: 13th Intern. Conference Dielectric and Insulating Systems in Electrical Engineering (DISEE 2000), Casa - Pila; 12.09.2000 - 14.09.2000; in: "Proceedings of DISEE 2000", (2000), S. 114 - 116.
  822. T. Fellner, W. Smetana, H. Hauser:
    "A Simulation Model for Low K Thick Film Dielectrics";
    Vortrag: 36th Intern. Conference on Microelectronics, Devices and Materials (MIDEM 2000), Postojna, Slovenia; 18.10.2000 - 20.10.2000; in: "Proceedings", (2000), S. 153 - 158.
  823. T. Fellner, W. Smetana, H. Hauser, J. Nicolics:
    "Properties of Low K Thick Film Dielectrics";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Dresden, Germany; 18.05.1999 - 20.05.1999; in: "Proc. of ISSE 99", (1999), ISBN: 3-934142-00-1; S. 382 - 385.

    Zusätzliche Informationen
  824. M. Fasching, J. Nicolics, M. Mündlein:
    "Minimierung des thermischen Widerstands von SMT-Leistungsbauelementen auf Leiterplatten für Hochtemperaturanwendungen";
    Vortrag: DVS/GMM-Fachtagung für Elektronische Baugruppen - Aufbau- und Regelungstechnik, Fellbach, BRD; 08.02.2006 - 09.02.2006; in: "GMM-Fachbericht No. 50", (2006), S. 189 - 194.
  825. M. Fasching, J. Nicolics:
    "Investigation of Pulse Load Behavior of Power Wire-Wound Resistors";
    Poster: 32nd International Spring Seminar on Electronics Technology (ISSE), Brno, Czech Republic; 13.05.2009 - 17.05.2009; in: "ISSE 2009 Conference Proceedings", (2009), ISBN: 978-1-4244-4260-7; S. 184 - 185.
  826. M. Fasching, G. Hanreich, R. Egger, J. Nicolics, W. Hachmeister:
    "Demontage von Leadless Packages mittels Laser-Entlöten";
    Vortrag: Elektronische Baugruppen - Aufbau- und Fertigungstechnik, Fellbach; 06.02.2002 - 07.02.2002; in: "GMM-Fachbericht: Elektronische Baugruppen", (2002), S. 227 - 233.
  827. G. Fasching:
    "Humanismus und Technik";
    Vortrag: Humanismus - heute, Universität für Bodenkultur, Wien (eingeladen); 16.12.1999; in: "Vortragsreihe "Humanismus - heute"", (1999).
  828. G. Fasching:
    "Über den Blinden Fleck und die Mehrfachbilder des naturwissenschaftlich-technischen Auges";
    Vortrag: Int. Wittgenstein Symposium, Kirchberg a. Wechsel (eingeladen); 16.08.1998 - 22.08.1998; in: "Tagungsband", (1998), S. 197 - 206.

    Zusätzliche Informationen
  829. T. Fabian, G. Brasseur, H. Hauser:
    "Impact of Axial and Radial Rotor Offset on the Measurement Error of a Capacitive Angular-Position Sensor";
    Vortrag: IEEE Instrumentation & Measurement Technology Conference (IMTC 99), Venice, Italy; 24.05.1999 - 26.05.1999; in: "IEEE Conference Proceedings on Instrumentation and Measurement Technology (IMTC/99)", No. 99CH36309 (1999), ISBN: 0-7803-5276-9; S. 1362 - 1366.
  830. M. Evanzin, H. Hauser, Y. Didosyan:
    "Hysteresis measurement and calculation of magneto-optical sensors based on orthoferrites";
    Vortrag: 3rd IEEE Conference on Sensors (IEEE Sensors 2004), Vienna, Austria; 24.10.2004 - 27.10.2004; in: "CD-ROM Proceedings Sensor 2004", D. Rocha Wiese Meneses, P. M. Sarro, M. Vellekoop (Hrg.); (2004), ISBN: 0-7803-8692-2; S. 1082 - 1085.
  831. M. Evanzin, H. Hauser, Y. Didosyan:
    "Magnetic hysteresis calculation of sensors based on orthoferrites";
    Poster: 5th European Magnetic Sensors and Actuators (EMSA 2004), Cardiff, UK; 04.07.2004 - 07.07.2004; in: "Book of Abstracts - EMSA 2004", (2004), S. W-O.5.
  832. M. Evanzin, H. Hauser, Y. Didosyan:
    "Magneto-optical Measurements of Orthoferrites";
    Vortrag: International Conference on Magnetic Measurements, Prague, Czech Republic; 30.06.2004 - 02.07.2004; in: "Book of Abstracts - Magnetic Measurements 2004", (2004), ISBN: 80-01-02994-8; S. 9 - 10.
  833. M. Evanzin, H. Hauser, Y. Didosyan:
    "Prediction of the Magnetization Process in Orthoferrites";
    Poster: 4th International Symposium on Hysteresis and Micromagnetic Modeling, Salamanca, Spain; 28.05.2003 - 30.05.2003; in: "Abstracts Booklet HMM 2003", (2003), S. 123.
  834. M. Evanzin, H. Hauser, Y. Didosyan:
    "The Calculation of the Hysteresis Loop with Regard to the Contribution of Single Domains in Orthoferrites";
    Vortrag: Electromagnetic Research Symposium, Pisa, Italy; 28.03.2004 - 31.03.2004; in: "Progress in Electromagnetic Research Symposium 2004", (2004), ISBN: 88-8492-268-2; S. 184.
  835. J. Espina-Hernandez, R. Grössinger, S. Kato, F. Keplinger, H. Hauser, E. Estévez-Rams:
    "New Sensors for Measuring M and H in High Magnetic Fields";
    Poster: 7th International Symposium on Research in High Magnetic Fields, Toulouse, France; 20.07.2003 - 23.07.2003; in: "Proceedings", (2003), S. 129.
  836. A. Elefsiniotis, N. Kokorakis, Th. Becker, U. Schmid:
    "A Novel High-Temperature Aircraft-Specific Energy Harvester Using PCMs and State of the art TEGs";
    Vortrag: 12th European Conference on Thermoelectrics, Madrid, Spain; 24.09.2014 - 26.09.2014; in: "Materials Today: Proceedings", Elsevier, (2015), ISSN: 2214-7853; S. 814 - 822.

    Zusätzliche Informationen
  837. A. Elefsiniotis, N. Kokorakis, Th. Becker, U. Schmid:
    "Design and Material Aspects for Thermoelectric Energy Harvesting Devices in Aircrafts";
    Vortrag: SPIE Microtechnologies 2013, Grenoble, France; 24.04.2013 - 26.04.2013; in: "Proceedings of SPIE", 8763 (2013), ISSN: 0277-786x.

    Zusätzliche Informationen
  838. A. Elefsiniotis, N. Kokorakis, Th. Becker, U. Schmid:
    "Performance Of A Low Temperature Energy Harvesting Device For Powering Wireless Sensor Nodes In Aircrafts Applications";
    Vortrag: Transducers 2013, Barcelona, Spain; 16.06.2013 - 20.06.2013; in: "Transducers 2013 - Proceedings", IEEE, (2013), ISBN: 978-1-4673-5983-2; S. 2276 - 2279.

    Zusätzliche Informationen
  839. E. Eisermann, K. Höll, W. Smetana, W. Tusler, M. Unger, J. Withmarsh:
    "Comparison of low cost, insulated aluminium substrates used as integrated heat sinks with conventional technology";
    Poster: International Conference of IMAPS Germany Chapter, Munich, Germany; 14.10.2008 - 15.10.2008; in: "Proceedings of the International Conference of IMAPS German Chapter", (2008), ISBN: 978-83-917701-6-0; 1 S.
  840. S. Eder, G. Vorlaufer, F. Franek, G. Betz:
    "Molecular Dynamics Simulations of the Tribological Performance of Model Lubricant Additives";
    Vortrag: World Tribology Kongress 2009 - WTC IV, Kyoto, J; 06.09.2009 - 11.09.2009; in: "World Tribology Kongress 2009 - Proceedings", Japanese Society of Tribologists, (2009), ISBN: 978-4-9900139-9-8; S. 623.

    Zusätzliche Informationen
  841. M. Dorfmeister, M. Schneider, U. Schmid:
    "A Bistable Ultrasonic Mems Device With An Integrated Piezoelectric Scandium-Aln Thin Film Actuator For Switching";
    Vortrag: 20th International Conference on Solid State Sensors, Actuators and Microsystems & Eurosensors XXXIII (Transducers & Eurosensors XXXIII), Berlin, D; 23.06.2019 - 27.06.2019; in: "20th International Conference on Solid State Sensors and Actuators (Transducers 19)", IEEE, CFP19SSA-ART (2019), ISBN: 978-1-5386-8104-6; S. 853 - 856.

    Zusätzliche Informationen
  842. M. Dorfmeister, R. Pfister, M. Schneider, U. Schmid:
    "Analytische Modellierung von kreisförmigen, bistabilen Membranen mit unterschiedlichen, geometrischen Abmessungen";
    Vortrag: MikroSystemTechnik Kongress 2017, München, Deutschland; 23.10.2017 - 25.10.2017; in: "MikroSystemTechnik Kongress 2017 - Proceedings", VDE Verlag GMBH, (2017), ISBN: 978-3-8007-4491-6; S. 727 - 730.

    Zusätzliche Informationen
  843. M. Dorfmeister, B. Kössl, M. Schneider, U. Schmid:
    "A Novel Bistable MEMS Membrane Concept Based on an Integrated AlN Thin Film for Switching";
    Vortrag: Eurosensors 2018, Graz, Österreich; 09.09.2018 - 12.09.2018; in: "Proceedings - Eurosensors 2018, Graz", MDPI, Vol. 2 (2018), ISSN: 2504-3900; S. 1 - 4.

    Zusätzliche Informationen
  844. N. Dörr, T. Sebestyen, F. Franek, A. Merstallinger, W. Pahl:
    "Alternative Lubricating Fluids for Porous Metal Bearings";
    Vortrag: ÖTG-Symposium 2005, Graz, Österreich; 10.11.2005; in: "Tribosysteme in der Fahrzeugtechnik", Österreichische Tribologiscge Gesellschaft, Wien (2005), ISBN: 3-901657-19-3; S. 149 - 156.
  845. N. Dörr, A. Schneider, T. Sebestyen, F. Franek, A. Merstallinger, W. Pahl:
    "Ionic liquids in porous metal bearings (Feasibilty study)";
    Vortrag: ÖTG-Symposium 2006, Steyr, A; 23.11.2006; in: "Zukunftstrends tribologischer Komponenten in der Antriebstechnik", (2006), ISBN: 978-3-901657-23-8; S. 65 - 76.

    Zusätzliche Informationen
  846. N. Dörr, F. Novotny-Farkas, N. Novotny-Farkas, F. Franek, M. Hauptkorn:
    "Automotive Lubricants In Russia - A Promising Field Of Activities?";
    Vortrag: ÖTG Symposium 2013, Wiener Neustadt, NÖ; 28.11.2013; in: "ÖTG Symposium 2013 - Automotive Tribology", Österreichsiche Tribologische Gesellschaft, (2013), ISBN: 978-3-901657-46-7; S. 125 - 131.
  847. N. Dörr, B. Jakoby, Ch. Riesch, A. Pauschitz, F. Franek:
    "Microemulsions as lubricating fluids - challenges and possible applications";
    Vortrag: 2nd Vienna International Conference on Micro- and Nano-Technology - Viennano'07, Vienna, Austria; 14.03.2007 - 16.03.2007; in: "Proceedings of the Viennano '07", (2007), ISBN: 978-3-901657-25-2; S. 337 - 339.
  848. N. Dörr, A. Ecker, Th. Lebersorger, A. Pauschitz, F. Franek:
    "Tribological Behaviour of Selected Ionic Liquids";
    Vortrag: 15th international colloquium tribology "Automotive and Industrial Lubrication", Ostfildern, Germany; 17.01.2006 - 19.01.2006; in: "15th international colloquium tribology - Automotive and Industrial Lubrication - Book of Synopses 2006", TAE, (2006), ISBN: 3-924813-62-0.

    Zusätzliche Informationen
  849. Z. Djinovic, M.C. Tomic, A. Vujanic:
    "Spectrally encoded fiber optic measurement of diffuse target displacemnet";
    Vortrag: 4M 2005 - First International Conference on Multi-Material Micro Manufacture, Forschungszentrum Karlsruhe, Deutschland; 29.06.2005 - 01.07.2005; in: "4M 2005 - First International Conference on Multi-Material Micro Manufacture - Proceedings", Elsevier, (2005), ISBN: 0-080-44879-8; S. 447 - 450.

    Zusätzliche Informationen
  850. Z. Djinovic, M.C. Tomic, S. Mitic, M. Cordes, A. Vujanic, C. Kment:
    "Nanometer Scale Measurement of Wear Events by Fiber-Optic White Light Interferometry";
    Vortrag: 18th European Conference on Solid-State Sensors (XVIII), Rome, Italy; 12.09.2004 - 15.09.2004; in: "Proceeding of Eurosensors XVIII", (2004), S. 166 - 167.
  851. Z. Djinovic, M.C. Tomic, S. Mitic, M. Cordes, P. Adrigan, A. Vujanic, C. Kment:
    "High Resolution Measurement of Wear Rate Using Low Coherence Interferomtery Based on a 3x3 Fiber Optic Coupler";
    Vortrag: 1st Vienna International Conference on Micro- and Nano-Technology - Viennano'05, Vienna, Austria; 09.03.2005 - 11.03.2005; in: "1st Vienna International Conference on Micro- and Nano-Technology - Proceedings", Österreichische Tribologische Gesellschaft, Wien (2005), ISBN: 3-901657-17-7; S. 423 - 430.

    Zusätzliche Informationen
  852. Z. Djinovic, M.C. Tomic, L. Manojlovic, Z. Lazic, M. Smiljanic:
    "Non-contact Measurement of Thickness Uniformity of Chemically Etched Si Membranes by Fiber-Optic Low-Coherence Interferometry";
    Poster: 26th International Conference on Microelectronics 2008, Nis, Serbien; 11.05.2008 - 14.05.2008; in: "26th International Conference on Microelectronics (MIEL 2008)", IEEE, IEEE Catalog No. CFP08432 (2008), ISBN: 978-1-4244-1882-4; S. 321 - 324.

    Zusätzliche Informationen
  853. Z. Djinovic, R. Pavelka, L. Manojlovic, A. Vujanic, M.C. Tomic:
    "Measurement of frequency response of the bone ossicles in the sheep middle ear by the fiber-optic microphone";
    Vortrag: 4M 2008 - 4th International Conference on Multi-Material Micro Manufacture, Cardiff, UK; 09.09.2008 - 22.09.2008; in: "4M 2008 - Proceedings of the 4th International Conference on Multi-Material Micro Manufacture", Whittles Publishing, (2008), ISBN: 978-1-904445-76-0; S. 135 - 138.

    Zusätzliche Informationen
  854. Z. Djinovic, S. Mitic, M.C. Tomic, M. Cordes, A. Vujanic, C. Kment:
    "Investigation of Tribology Phenomena by Low-Coherence Fiber-Optic Interferometry";
    Vortrag: International Conference on Microelectronics (MIEL), Nis, Serbia and Montenegro; 16.05.2004 - 19.05.2004; in: "Proceeding of the 24th International Conference on Microelectronics", Vol. 1 (2004), ISBN: 0-7803-8166-1; S. 227 - 230.
  855. Z. Djinovic, S. Mitic, R. Pavelka, A. Vujanic, D. Vujanic, C. Kment:
    "Contactless Technique for In-vivo Measurement of Amplitude Vibrations of the Auditory Ossicles";
    Vortrag: International Conference on Microelectronics (MIEL), Nis, Serbia and Montenegro; 16.05.2004 - 19.05.2004; in: "Proceedings of the 24th International Conference on Microelectronics", Vol. 1 (2004), ISBN: 0-7803-8166-1; S. 1 - 4.
  856. Z. Djinovic, S. Mitic, C. Kment, A. Vujanic, D. Vujanic:
    "Middle Ear Investigation by Low Coherence Interferometry";
    Vortrag: ETRAN 2003, Herceg Novi, Serbien & Montenegro; 08.06.2003 - 13.06.2003; in: "Proccedings of the XLVII Conference", (2003), S. 137 - 140.
  857. Z. Djinovic, L. Manojlovic, A. Vujanic, M.C. Tomic, M. Jech, T. Sebestyen:
    "EARLY STAGE CHARACTERISATION OF WEAR PHENOMENA BY FIBEROPTIC LOW-COHERENCE INTERFEROMETRY";
    Vortrag: 2nd Vienna International Conference on Micro- and Nano-Technology - Viennano'07, Wien; 14.03.2007 - 16.03.2007; in: "2nd Vienna International Conference on Micro- and Nano-Technology", (2007), ISBN: 978-3-901657-25-2; S. 331 - 336.

    Zusätzliche Informationen
  858. Z. Djinovic, L. Manojlovic, M.C. Tomic:
    "Non-destructive characterization of multilayer structures by low-coherence interferometry";
    Poster: 4M 2007 - Third International conference on multi-material micro manufacture, Borovets, Bulgaria; 03.10.2007 - 05.10.2007; in: "4M 2007 - Third international Conference on multi-material micro manufacture - Proceedings", (2007), ISBN: 978-1904445-53-1; S. 165 - 168.

    Zusätzliche Informationen
  859. Y. Didosyan, G.A. Reider, H. Hauser:
    "Anomalous domain nucleation in an orthoferrite optical prism";
    Poster: Annual Conference on Magnetism & Magnetic Materials, San Jose, CA, USA; 30.10.2006 - 03.11.2006; in: "Abstracts 50 MMM 2005", (2006), S. 256.
  860. Y. Didosyan, H. Hauser, H. Wolfmayr, W. Toriser:
    "Sensor Applications of Transparent Magnets";
    Vortrag: 16th European Conference on Solid-State Transducers (EUROSENSORS XVI), Prague, Czech Republic; 15.09.2002 - 18.09.2002; in: "Proceedings Eurosensors XVI", (2002), ISBN: 80-01-02576-4; S. 501 - 502.
  861. Y. Didosyan, H. Hauser, H. Wolfmayr, J. Nicolics, W. Toriser:
    "Fiberoptic MOCT on Orthoferrite";
    Vortrag: 47th Annual Conference on Magnetism & Magnetic Materials, Tampa, Florida, USA; 11.11.2002 - 15.11.2002; in: "Abstracts MMM 02", (2002), S. 344.
  862. Y. Didosyan, H. Hauser, H. Wolfmayr, P.L. Fulmek:
    "Magnetooptical rotational speed sensor based on orthoferrite";
    Poster: 4th European Magnetic Sensors and Actuators Conference (EMSA 2002), Athens, Greece; 03.07.2002 - 05.07.2002; in: "Book of Abstracts EMSA 2002", (2002), S. S4_P2.
  863. Y. Didosyan, H. Hauser, G.A. Reider, J. Nicolics:
    "Sensors and Actuators on Orthoferrites";
    Vortrag: 3rd IEEE Conference on Sensors (IEEE Sensors 2004), Vienna, Austria; 24.10.2004 - 27.10.2004; in: "CD-ROM Proceedings Sensor 2004", D. Rocha Wiese Meneses, P. M. Sarro, M. Vellekoop (Hrg.); (2004), ISBN: 0-7803-8692-2; S. 1032 - 1035.
  864. Y. Didosyan, H. Hauser, G.A. Reider, R. Glatz, H. Wolfmayr:
    "Magnetic After-Effect in Yttrium Orthoferrite";
    Poster: 47th Annual Conference on Magnetism & Magnetic Materials, Tampa, Florida, USA; 11.11.2002 - 15.11.2002; in: "Abstracts MMM 02", (2002), S. 438.
  865. Y. Didosyan, H. Hauser, G.A. Reider:
    "Fast polarization independent optical switch on orthoferrite";
    Poster: 49th Annual Conference on Magnetism & Magnetic Materials (MMM 04), Jacksonville, Florida, USA; 07.11.2004 - 11.11.2004; in: "Book of Abstracts - MMM 04", (2004), S. DS-11.
  866. Y. Didosyan, H. Hauser, G.A. Reider:
    "Magneto-Optical Switch Based on Orthoferrite";
    Poster: IEEE International Magnetics Conference, Amsterdam, The Netherlands; 28.04.2002 - 02.05.2002; in: "Digest Intermag Europe 2002", (2002), S. DS 04.
  867. Y. Didosyan, H. Hauser, G.A. Reider:
    "Synchronization Measurements of a Polarization Independent Magneto-Optical Switch";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Wr. Neustadt, Austria; 19.05.2005 - 22.05.2005; in: "Book of Abstract", (2005), ISBN: 3-85133-036-6; S. 86 - 87.
  868. Y. Didosyan, H. Hauser, G.A. Reider:
    "Very fast optical switch with yttrium orthoferrite";
    Vortrag: Magneto Optical Recording International Symposium, Yokohama, Japan; 16.05.2004 - 19.05.2004; in: "Technical Digest of MORIS 2004", (2004), S. 100 - 101.
  869. Y. Didosyan, H. Hauser, N. Papanicolaou, G.A. Reider:
    "Lines and Domain Wall Inclination in Yttrium Orthoferrite";
    Poster: 10th International Symposium on Applied Electromagnetics and Mechanics, Tokyo, Japan; 13.05.2001 - 16.05.2001; in: "Proceedings of the 10th International Symposium on Applied Electromagnetics and Mechanics", (2001), S. WA-3-2.
  870. Y. Didosyan, H. Hauser, J. Nicolics, I. Yavorsky, P.L. Fulmek:
    "Light Diffraction by a Domain Wall of Yttrium Orthoferrite";
    Poster: Magnetism of Nanostructured Phases - MNP Conference, San Sebastian, Spain; 04.09.1998 - 06.09.1998; in: "MNP Abstracts", (1998), S. 128.
  871. Y. Didosyan, H. Hauser, J. Nicolics, G. Hanreich:
    "Magnetooptical measurements of mechanical quantities";
    Vortrag: IEEE Instrumentation & Measurement Technology Conference, Budapest, Hungary; 21.05.2001 - 23.05.2001; in: "Proceedings of the 18th IEEE Instrumentation & Measurement Technology Conference", (2001), ISBN: 0-7803-6646-4; S. 958 - 961.
  872. Y. Didosyan, H. Hauser, J. Nicolics, F. Haberl, M. Evanzin:
    "New Bistable Optical Switch";
    Vortrag: International Spring Seminar on Electronics Technology (ISSE), Balatonfüred, Hungary; 06.05.2000 - 10.05.2000; in: "ISSE 2000 Abstracts, S. 74 und ISSE 2000 Proceedings", (2000), ISBN: 963-420-639-5; S. 225 - 228.
  873. Y. Didosyan, H. Hauser, J. Nicolics, M. Evanzin, W. Toriser:
    "Magneto-optical Rotational Velocity Sensor";
    Poster: Joint European Magnetic Symposia JEMS, Grenoble, Frankreich; 28.08.2001 - 01.09.2001; in: "JEMS'01 Abstracts", (2001), S. 199.
  874. Y. Didosyan, H. Hauser, J. Nicolics, V. Barash, P.L. Fulmek:
    "Electric Current Sensors Based on Transparent Magnets";
    Vortrag: International Spring Seminar on Electronics Technology (ISSE), Neusiedl am See, Austria; 04.05.1998 - 07.05.1998; in: "ISSE 98 Abstracts S.50 und Proc. of ISSE'98", Wien (1998), ISBN: 3-85465-004-3; S. 43 - 47.
  875. Y. Didosyan, H. Hauser, J. Nicolics:
    "Magneto-optical Surface Evaluation";
    Poster: 6th Int. Workshop on Electromagnetic Non-destructive Evaluation, Budapest, Hungary; 28.06.2000 - 30.06.2000; in: "Proceedings of the ENDE 2000", (2000), S. 55 - 56.

    Zusätzliche Informationen
  876. Y. Didosyan, H. Hauser, J. Nicolics, F. Haberl, R. Chabicovsky:
    "Application of Orthoferrites for Angular Measurements";
    Vortrag: International Spring Seminar on Electronics Technology (ISSE), Dresden, Germany; 18.05.1999 - 20.05.1999; in: "Proc. of ISSE 99", (1999), ISBN: 3-934142-00-1; S. 204 - 207.

    Zusätzliche Informationen
  877. Y. Didosyan, H. Hauser, J. Nicolics, P.L. Fulmek:
    "Electrical Current Sensors Based on Transparent Magnets";
    Vortrag: IEEE Instrumentation & Measurement Technology Conference (IMTC 98), St. Paul, Minnesota, USA; 18.05.1998 - 21.05.1998; in: "Proceedings", (1998), S. 977 - 980.
  878. Y. Didosyan, H. Hauser, J. Nicolics:
    "Magneto-optical Angle Measurements";
    Vortrag: 44th Annual Conference on Magnetism & Magnetic Materials (MMM 99), San Jose, USA; 15.11.1999 - 18.11.1999; in: "MMM 99-Abstracts", (1999), S. 398.
  879. Y. Didosyan, H. Hauser, J. Nicolics:
    "Magneto-optical Measurements of Geometrical Quantities";
    Poster: XVI IMEKO World Congress 2000, Wien; 25.09.2000 - 28.09.2000; in: "IMEKO 2000 Abstracts", (2000), S. 246.

    Zusätzliche Informationen
  880. Y. Didosyan, H. Hauser, F. Haberl:
    "Temperature Dependence of the Domain Wall Mobility in Magnetooptical Current Transformers";
    Poster: 10th International Symposium on Applied Electromagnetics and Mechanics, Tokyo, Japan; 13.05.2001 - 16.05.2001; in: "Proceedings of the 10th International Symposium on Applied Electromagnetics and Mechanics", (2001), S. WP-3-2.
  881. Y. Didosyan, H. Hauser, P.L. Fulmek:
    "Application of Domain Wall Motion in Orthoferrites";
    Poster: International Conference on Ferrites (ICF 96), Bordeaux, France; 03.06.1996 - 06.09.1996; in: "ICF7-Abstracts", (1996), S. 422.
  882. Y. Didosyan, H. Hauser, P.L. Fulmek:
    "Bloch Lines in Yttrium Orthoferrite";
    Poster: 43rd Annual Conference on Magnetism and Magnetic Materials (MMM 98), Miami, USA; 09.11.1998 - 12.11.1998; in: "MMM98-Abstracts", (1998), S. 281.
  883. Y. Didosyan, H. Hauser, P.L. Fulmek:
    "Magnetic Field Sensor by Domain Wall Motion in Orthoferrites";
    Poster: 1st European Magnetic Sensors and Actuators Conference (EMSA 96), Iasi, Romania; 22.07.1996 - 24.07.1996; in: "EMSA96-Abstracts", (1996), S. A102.
  884. Y. Didosyan, H. Hauser, P.L. Fulmek:
    "Magneto-optical Current Sensor";
    Vortrag: IEEE Instrumentation and Measurement Technology Conference (IMTC 98), St. Paul, USA; 18.05.1998 - 21.05.1998; in: "Proc. of IMTC 98", IEEE Catalog, 98CH3622 (1998), ISBN: 0-7803-4797-8; S. 977 - 980.
  885. Y. Didosyan, H. Hauser, W. Fiala, W. Toriser:
    "New latching type optical switch";
    Poster: 46th Annual Conference on Magnetism & Magnetic Materials, Seattle, Washington, USA; 12.11.2001 - 16.11.2001; in: "MMM Abstracts", (2001), S. 47.
  886. Y. Didosyan, H. Hauser, W. Fiala, J. Nicolics, W. Toriser:
    "A New Magnetooptical Switch on Orthoferrite";
    Poster: Informationstagung Mikroelektronik (ME), Wien, Ö; 10.10.2001 - 11.10.2001; in: "Beiträge der Informationstagung ME01", D. Donhoffer, G. Fiedler (Hrg.); ÖVE-Schriftenreihe, 26 (2001), ISBN: 3-85133-022-6; S. 129 - 134.
  887. Y. Didosyan, H. Hauser, D. Drvoderic, J. Nicolics:
    "Large aperture and high speed optical rotator";
    Vortrag: Int. Symposium on Non-Linear Electromagnetic Systems (ISEM), Bad Gastein; 12.09.2005 - 14.09.2005; in: "ISEM 2005 Short Paper Proceedings", (2005), 3-902105-00-1; S. 402 - 403.
  888. Y. Didosyan, H. Hauser, D. Drvoderic:
    "Large aperture optical rotator";
    Vortrag: 12th International Symposium on Interdisciplinary Electromagnetic, Mechanic & Biomedical Problems, Bad Gastein, Austria; 12.09.2005 - 14.09.2005; in: "Short Paper Proceedings ISEM 2005", (2005), ISBN: 3-902105-00-1; S. 402 - 403.
  889. Y. Didosyan, H. Hauser, V. Barash, P.L. Fulmek:
    "Sub-Sonic Domain Wall Dynamics of Yttrium Orthoferrite";
    Poster: 8th Int. Symposium on Non-Linear Electromagnetic Systems (ISEM), Braunschweig, Germany; 12.05.1997 - 14.05.1997; in: "Nonlinear Electromagnetic Systems; Studies in Applied Electromagnetics and Mechanics", V. Kose, J. Sievert (Hrg.); IOS Press, Amsterdam, 13 (1998), ISBN: 90-5199-381-1; S. 519 - 522.
  890. Y. Didosyan, H. Hauser:
    "Electrical Current Sensor of Both High Bandwith and Temperature Range";
    Vortrag: 14th European Conference on Solid-State Transducers (Eurosensors 2000), Copenhagen, Denmark; 27.08.2000 - 30.08.2000; in: "Proceedings", (2000), S. 535 - 536.
  891. Y. Didosyan, H. Hauser:
    "Magneto-Optic Sensor Principles and Devices";
    Vortrag: 5th Conference on Magnetic Material Measurement and Modeling (5M4), Ames, Iowa, USA (eingeladen); 16.05.2002 - 17.05.2002; in: "Magnetic Sensor Materials & Devices", (2002), S. 1.04.01 - 1.04.24.
  892. Y. Didosyan, H. Hauser:
    "Magneto-optical Current Transformers";
    Poster: 2nd European Conference on Magnetic Sensors & Actuators, Sheffield, Great Britain; 13.07.1998 - 15.07.1998; in: "EMSA 98 - Abstracts", (1998), S. 156.
  893. Y. Didosyan, H. Hauser:
    "Magneto-optical Rotational Velocity Sensor";
    Vortrag: 3rd European Conference on Magnetic Sensors & Actuators (EMSA 2000), Dresden, D; 19.07.2000 - 21.07.2000; in: "EMSA 2000 Proceedings, Dresdner Beiträge zur Sensorik", G. Gerlach (Hrg.); 13 (2000), S. 159 - 160.
  894. Y. Didosyan, H. Hauser:
    "Magnetooptical Measurements of Magnetic Fields and Mechanical Quantities";
    Poster: 16th Electromagnetic Field and Materials, Bratislava, Slovakia; 11.09.2002 - 13.09.2002; in: "The Book of Abstracts", (2002), S. 128.
  895. Y. Didosyan, H. Hauser:
    "Multistable Optical Rotator";
    Poster: 9th Int. Symposium on Non-Linear Electromagnetic Systems (ISEM), Pavia, Italy; 10.05.1999 - 12.05.1999; in: "Nonlinear Electromagnetic Systems: Studies in Applied Electromagnetics and Mechanics", P. Di Barba, A. Savini (Hrg.); IOS Press, Amsterdam, 18 (2000), ISBN: 1-58603-024-8; S. 19 - 22.
  896. Y. Didosyan, H. Hauser:
    "Nanostructures of Zero Magnetization in Orthoferrites";
    Vortrag: International Conference on Nanotechnology, Maui, Hawaii; 28.10.2001 - 30.10.2001; in: "Proceedings of the 1st IEEE Conference on Nanotechnology", (2001), S. 56 - 59.
  897. Y. Didosyan, V. Barash, H. Hauser:
    "Application of Yttrium Orthoferrite on the Developement of New Optical Elements";
    Vortrag: Kongress für Optische Sensorik, Meßtechnik, Elektronik (OPTO 96), Leipzig, Germany; 25.09.1996 - 27.09.1996; in: "Proceedings of the 2nd Congress on Optical Sensor Technology, Measuring Techniques, Electronics", ACS Organisation-Ges.m.b.H./AMA Fachverband f. Sensorik, (1996), S. 279 - 284.
  898. Y. Didosyan, V. Barash, H. Hauser:
    "Domain Wall Dynamics of Yttrium Orthoferrite";
    Poster: Soft Magnetic Materials Conference (SMM13), Grenoble, France; 24.09.1997 - 26.09.1997; in: "SMM13-Abstracts", (1997), S. 92.
  899. Y. Didosyan, V. Barash, H. Hauser:
    "Magneto-optical Sensor for Angular Measurements Based on Yttrium Orthoferrite";
    Poster: 9th Int. Prec. Eng. Sem. (9-IPES) & 4th Int. Conf. on Ultraprec. in Manufact. Eng. (UME4), Braunschweig, Germany; 26.05.1997 - 30.05.1997; in: "9-IPES/UME4 Abstracts", (1997), S. 240.
  900. Y. Didosyan, V. Barash, H. Hauser:
    "Nonlinear domain wall dynamics in yttrium orthoferrite";
    Poster: Int. Symposium on Non-Linear Electromagnetic Systems (ISEM), Braunschweig, Germany; 12.05.1997 - 14.05.1997; in: "Conference Digest", Studies in Applied Electromagnetics and Mechanics, IOS Press Amsterdam, (1997), S. TPB216.
  901. Y. Didosyan, V. Barash, H. Hauser:
    "Subsonic Domain Walls Dynamics in Yttrium Orthoferrite";
    Poster: Int. Conference on Magnetism (ICM 97), Cairns; 27.07.1997 - 01.08.1997; in: "ICM 97 Abstract", (1997), S. G314.
  902. A. Deutschinger, W. Brenner, B. Volland, K. Ivanova, T. Ivanov, I. Rangelow:
    "Characterization of an electro thermal micro gripper by the use of a micro assembly station and dynamic SEM measurements";
    Vortrag: 4M Cell handling and Actuation Follow-up Workshop, Wien; 19.06.2008 - 20.06.2008; in: "4M Cell handling and Actuation Follow-up Workshop", (2008).

    Zusätzliche Informationen
  903. H. Detter, P. Hajek, W. Brenner, A. Vujanic:
    "Modulare Stents im Carotis-Bereich";
    Vortrag: Informationstagung Mikroelektronik (ME), Wien; 10.10.2001 - 11.10.2001; in: "ME 01", D. Donhoffer, G. Fiedler (Hrg.); Eigenverlag des ÖVE, Nr. 26/Wien (2001), ISBN: 3-85133-022-6; S. 371 - 377.
  904. H. Detter, W. Brenner, W. Hannenheim:
    "Characteristics of Technologies";
    Vortrag: FSRM 1999, Neuchatel; 19.04.1999 - 20.04.1999; in: "FSRM 1999", G. Popovic (Hrg.); (1999), S. III/1 - III/4.
  905. H. Detter:
    "Engineering Methods in the Field of Micro- and Nano-Parts, -Components and -Systems";
    Vortrag: 1st Vienna International Conference on Micro- and Nano-Technology - Viennano'05, Vienna, Austria; 09.03.2005 - 11.03.2005; in: "1st Vienna International Conference on Micro- and Nano-Technology - Proceedings", Österreichische Tribologische Gesellschaft, Wien (2005), ISBN: 3-901657-17-7; S. 11 - 20.
  906. H. Detter:
    "Kooperation NANO'05 - Begrüssung und Einführung";
    Vortrag: Kooperation NANO '05, Wiener Neustadt; 19.10.2005 - 20.10.2005; in: "CD-ROM Vorträge Kooperation Nano 05", (2005), 7 S.
  907. H. Detter:
    "Micro- and Nanotechnical Production";
    Vortrag: 1st Vienna International Conference on Micro- and Nano-Technology - Viennano'05, Vienna, Austria; 09.03.2005 - 11.03.2005; in: "1st Vienna International Conference on Micro- and Nano-Technology - Proceedings", Österreichische Tribologische Gesellschaft, Wien (2005), ISBN: 3-901657-17-7; S. 121 - 134.
  908. D. Dergez, A. Bittner, J. Schalko, U. Schmid:
    "Low-stress and long-term stable a-SiNx:H films deposited by ICP- PECVD";
    Poster: EUROSENSORS 2014 - 28th European Conference on Solid-State Transducers, Brescia, I; 07.09.2014 - 10.09.2014; in: "Procedia Engineering", Elsevier, 87 (2014), ISSN: 1877-7058; S. 100 - 103.

    Zusätzliche Informationen
  909. A. Derbouz Draoua, B. Martel, S. Dubois, C. Audoin, M. Serasset, A. Fauveau, H. Radhakrishnan, J. Denafas, L. Petreniene, N. Severino, N. Bednar, A. Ulyashin, M. Syvertsen:
    "On the Fabrication of Solar Cells Based on Newly Produced Recycled Silicon Feedstocks From CABRISS - A Comparative Study Between Material Properties and Solar Cell Performances";
    Vortrag: 33rd European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC), Amsterdam; 25.09.2017 - 29.09.2017; in: "EU PVSEC 2017 - 33rd European Photovoltaic Solar Energy Conference and Exhibition", (2017), ISSN: 2196-0992; S. 483 - 487.

    Zusätzliche Informationen
  910. O. Del Medico, A. Almansa, E. Chatzitheodoridis:
    "Design and Characterization of a Gripper with Optical Sensor";
    Vortrag: 12th Micromechanics Europe Worshop, Cork, Ireland; 16.09.2001 - 18.09.2001; in: "MME 2001", M. Hill (Hrg.); National Microelectronics Research Cebtre, Cork (2001), S. 19 - 22.

    Zusätzliche Informationen
  911. M. Damnjanovic, D. Zivanov, A. B. Menicanin, A. Maric, G. Radosavljevic, S. Djuric:
    "Ferrite transformer inductance modeling and extraction based on S-parameter measurement";
    Poster: IEEE International Magnetics Conference, Teipei, Taiwan; 25.04.2011 - 29.04.2011; in: "INTERMAG 2011 Conference Proceedings", (2011), S. 1 - 2.
  912. B. Czerny, B. Nagl, M. Lederer, A. Trnka, G. Khatibi, M. Thoben:
    "In situ vibration measurements on power modules under operating conditions";
    Poster: IEEE 2012 13th international Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2012, Cascais, Portugal; 16.04.2012 - 18.04.2012; in: "IEEE Xplore Proceedings", (2012), ISBN: 978-1-4673-1513-5; S. 1 - 5.
  913. A Cvetanovic, A. Deutschinger:
    "Development of a Visual System for Collision Avoidance and a Control System for Micro Manipulation in a SEM Chamber";
    Poster: Informationstagung Mikroelektronik 08 (ME2008), Wien; 15.10.2008 - 16.10.2008; in: "Tagungsband zur Informationstagung Mikroelektronik 08", (2008), ISBN: 978-3-85133-049-6; S. 169 - 172.

    Zusätzliche Informationen
  914. A Cvetanovic, A. Cvetanovic, A. Deutschinger, M. Soucek, W. Brenner:
    "Design of a Novel Video and Control System for the Prevention of Collision during the Micro Handling in an SEM Chamber";
    Poster: 34th International Conference on Micro & Nano Engineering, Athen, Griechenland; 15.09.2008 - 19.09.2008; in: "Abstract Book", (2008), S. 340.

    Zusätzliche Informationen
  915. A Cvetanovic, A Cvetanovic, M. Soucek, D. Andrijasevic, W. Brenner:
    "A Concept of Collision Prevention during Micro Assembly in a SEM Chamber";
    Poster: 4M 2007 - Third International conference on multi-material micro manufacture, Borovets, Bulgaria; 03.10.2007 - 05.10.2007; in: "4M 2007 - Third international Conference on multi-material micro manufacture - Proceedings", (2007), ISBN: 978-1904445-53-1; S. 51 - 54.

    Zusätzliche Informationen
  916. A Cvetanovic, A Cvetanovic, D. Andrijasevic, I. Giouroudi, W. Brenner:
    "A novel protective cover for microcomponents";
    Vortrag: 4M 2006 - Second international Conference on multi-material micro manufacture - Proceedings, Grenoble, France; 20.09.2006 - 22.09.2006; in: "4M 2006 - Second international conference on multi-material micro manufacture - Proceedings", Elsevier, (2006), ISBN: 0-080-45263-9; S. 369 - 372.

    Zusätzliche Informationen
  917. A Cvetanovic, A Cvetanovic, D. Andrijasevic, I. Giouroudi, W. Brenner:
    "A Novel Protective Cover in Assembling of Micro Components in a SEM Chamber";
    Vortrag: 2006 IEEE Conference on Automation Science and Engineering, Shanghai, China; 07.10.2006 - 10.10.2006; in: "Proceeding of the 2006 IEEE Conference on Automation Science and Engineering", IEEE, Catalog Number 06EX1338C (2006), ISBN: 1-4244-0311-1; Paper-Nr. SP2.3/044-62, 5 S.
  918. A Cvetanovic, W. Brenner, H. Detter:
    "Automation of Microassembly Process in SEM Chamber with a Novel Protective Covering Plate";
    Poster: Junior Scientist Conference 2006, Wien, Austria; 19.04.2006 - 21.04.2006; in: "Junior Scientist Conference 2006 - Proceedings", (2006), ISBN: 3-902463-05-8; S. 97 - 98.
  919. A. Csordás-Tóth, G. Kiss, J. Takács, L. Toth, P. Gál, F. Franek, A. Pauschitz:
    "The Investigation of Friction and Wear Properties of Al203-Ti02 Plasma Sprayed coatings at room and ....";
    Vortrag: World Tribology Congress, London. GB; 08.09.1997 - 12.09.1997; in: "1st World Tribology Congress - Abstracts of Papers", Mechanical Engineering Publications Limited, London (1997), ISBN: 1860581099; S. 154.
  920. E. Corniani, L. Vilhena, V. Marian, M. Jech, M. Rodriguez Ripoll, M. Sedlacek, F. Ditroi, F. Franek:
    "Experimental wear volume analysis on Al-Si-Cu laser textured cylinder liners using thin layer activation technique";
    Vortrag: World Tribology Kongress 2009 - WTC IV, Kyoto, J; 06.09.2009 - 11.09.2009; in: "World Tribology Kongress 2009 - Proceedings", Japanese Society of Tribologists, (2009), ISBN: 978-4-9900139-9-8; S. 131.

    Zusätzliche Informationen
  921. E. Corniani, M. Jech, T. Wopelka, F. Ditroi, F. Franek:
    "Experimental wear volume analysis through Thin Layer Activation (TLA) on AISI-52100 (100Cr6) ball for ball bearings applications";
    Vortrag: Leeds-Lyon Symposium 2010, Leeds; 07.09.2010 - 10.09.2010; in: "Tribology for Sustainability - Economic, Environmental and Quality of Life", (2010).

    Zusätzliche Informationen
  922. E. Corniani, M. Jech, V. Marian, T. Wopelka, F. Ditroi, L. Vilhena, M. Ripol, M. Sedlacek, F. Franek:
    "Impact of Laser Surface Texturing on AI-Si-Cu Cylinder Liners Evaluated Through TLA and nVCT";
    Vortrag: 17th International Colloquium Tribology, Ostfildern, D; 19.01.2010 - 21.01.2010; in: "Solving Friction and Wear Problems", Technische Akademie Esslingen, Ostfildern, (2010), ISBN: 3-924813-80-9; S. 207.

    Zusätzliche Informationen
  923. U. Cihak-Bayr, R. Jisa, St. Laumann, R. Eberle, M. Keppeler, U. Hofmann, F. Franek:
    "Tribological Properties Of Copper Alloys Depending On Their Production Route: Mim Versus Casting And Forming";
    Vortrag: ÖTG Symposium 2013, Wiener Neustadt, NÖ; 28.11.2013; in: "ÖTG Symposium 2013 - Automotive Tribology", Österreichsiche Tribologische Gesellschaft, (2013), ISBN: 978-3-901657-46-7; S. 211 - 218.
  924. E. Chatzitheodoridis, G. Popovic, W. Brenner, H. Detter:
    "Handling and Assembly of Functionally Adapted Microcomponents";
    Vortrag: International Conference on Microelectronics (MIEL), Nis, Jugoslavia; 14.05.2000 - 17.05.2000; in: "Proc. of MIEL 2000", (2000), S. 577 - 580.
  925. E. Chatzitheodoridis, D. Petrovic, A. Almansa, O. Del Medico, G. Popovic, H. Detter:
    "A Semi-Automatic, Modular Microassembly Station assisted by Image Processing";
    Vortrag: iMEMS, Singapore; 04.07.2001 - 06.07.2001; in: "Proceedings of the international MEMS Workshop 2001", F. Tay Eng Hock (Hrg.); Future Techno Designs Pte. Ltd., Singapore (2001), ISBN: 981-04-4165-7; S. 587 - 594.

    Zusätzliche Informationen
  926. R. Chabicovsky, J. Nicolics:
    "Dünnschicht-Thermoelemente aus W-NiCr für die thermische Analyse eines Laser-Lötprozesses";
    Vortrag: Förderverein für Sensorik e.V. JENASENSORIC, Jena, Deutschland; 10.10.1997 - 12.10.1997; in: "Tagungsbericht 9. Workshop Mikrotechniken und Mikrosensoren für Umwelt, Biologie und Medizin", (1997), ISSN: 1434-7288; S. 18 - 19.
  927. R. Chabicovsky, L. Musiejovsky, J. Nicolics:
    "Laser Soldering of Sensors with Thin Film Metallizations";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Neusiedl, Austria; 04.05.1998 - 07.05.1998; in: "Proceedings of the 21st Intern. Spring Seminar on Electronics Technology", (1998), S. 160 - 164.
  928. St. Cermak, F. Wandling, W. Zdiarsky, P.L. Fulmek, G. Brasseur:
    "Capacitive Sensor for Torque Measurement";
    Vortrag: IMEKO 2000 World Congress, Vienna, Austria; 25.09.2000 - 28.09.2000; in: "Proceedings IMEKO 2000 World Congress", (2000).
  929. R. Catrin, C. Gachot, G. Marchand, U. Schmid, F. Mücklich:
    "Selective wet chemical etching of metallic thin films designed by Laser Interference Metallurgy (LIMET)";
    Vortrag: SPIE Europe: Microtechnologies for the New Millennium, Dresden, Deutschland; 04.05.2009 - 08.05.2009; in: "Proceedings of SPIE", Society of Photo-Optical Instrumentation Engineers (SPIE, 7362-7366 (2009).

    Zusätzliche Informationen
  930. A. Camarda, M. Tartagni, G. Sordo, J. Iannacci, M. Schneider, U. Schmid, A. Romani:
    "Smoothing The Way Towards Miniaturized MEMS AlN-based Piezoelectric Transformers";
    Vortrag: IEEE Sensors 2017, Glasgow, Schottland; 29.10.2017 - 01.11.2017; in: "IEEE Sensors 2017 - Proceedings", IEEE, (2017), ISBN: 978-1-5090-1012-7; S. 1 - 3.

    Zusätzliche Informationen
  931. R. Bruckberger, H. Hauser, P.L. Fulmek, H. Fillunger, St. Gründorfer:
    "Prototype of a High-Tc Superconducting Current Limiter";
    Poster: Int. Symposium on Non-Linear Electromagnetic Systems (ISEM 95), Cardiff, Great Britain; 17.09.1995 - 20.09.1995; in: "Nonlinear Electromagnetic Systems; Studies in Applied Electromagnetics and Mechanics", A.J. Moses, A. Basak (Hrg.); IOS Press, Amsterdam, 10 (1996), ISBN: 90-5199-251-3; S. 890 - 893.
  932. W. Brenner, A. Vujanic, G. Popovic, O. Del Medico:
    "Micro Torque Measurement Based on the Cable Brake Principle";
    Vortrag: IEEE Sensors 2002, Orlando, Florida USA; 11.06.2002 - 14.06.2002; in: "The First IEEE International Conference on Sensors", IEEE Operations Center, Piscataway, NJ (2002), ISBN: 0-7803-7455-x; S. 1 - 6.
  933. W. Brenner, A. Vujanic, G. Popovic:
    "Stents . Development of New Designs with Modular Structure"";
    Vortrag: EMBEC 1999 European Medical and Biological Engineering Conference, Vienna, Austria; 04.11.1999 - 07.11.1999; in: "Proc. of EMBEC", (1999), S. 1120 - 1121.
  934. W. Brenner, F. Sümecz, A. Vujanic:
    "Principles of Micro Torque Measurement";
    Vortrag: XVII IMEKO World Congress, Dubrovnik - Croatia; 22.06.2003 - 27.06.2003; in: "Metrology in the 3rd Millenium", (2003), S. 277 - 281.
  935. W. Brenner, F. Sümecz, G. Popovic, O. Del Medico:
    "Rotating Microsystems";
    Vortrag: ISROMAC-9, Honolulu, Hawaii, USA; 10.02.2002 - 14.02.2002; in: "Transport Phenomea and Dynamics of Rotating Machinery ", Y. Tsujimoto (Hrg.); Pacific Center of Thermal-Fluids Engineering, Honolulu, Hawaii, USA (2002), S. 1 - 8.
  936. W. Brenner, F. Sümecz, D. Andrijasevic, I. Giouroudi, K. Malecki, A. Almansa:
    "ADVANCED METHODS AND TOOLS FOR HANDLING AND ASSEMBLY IN MICROTECHNOLOGY - A EUROPEAN APPROACH IN THE FRAME OF THE FP6 MARIE CURIE RESEARCH TRAINING NETWORK ASSEMIC";
    Vortrag: 2nd Vienna International Conference on Micro- and Nano-Technology - Viennano'07, Wien; 14.03.2007 - 16.03.2007; in: "2nd Vienna International Conference on Micro- and Nano-Technology", (2007), ISBN: 978-3-901657-25-2; S. 55 - 62.

    Zusätzliche Informationen
  937. W. Brenner, F. Sümecz, D. Andrijasevic, I. Giouroudi, K. Malecki:
    "Advanced Methods and Tools for Handling and Assembly in Microtechnology - a European Approach in the Frame of the FP6 Marie Curie Research Training Network ASSEMIC";
    Vortrag: 42nd International Conference on Microelectronics, Devices and Materials and the Workshop on MEMS ans NEMS, Strunjan, Slovenja (eingeladen); 13.09.2006 - 15.09.2006; in: "42nd International Conference on Microelectronics, Devices and Materials - Proceedings", MIDEM, (2006), ISBN: 961-91023-6-3; S. 57 - 68.

    Zusätzliche Informationen
  938. W. Brenner, F. Sümecz, D. Andrijasevic, I. Giouroudi:
    "Strategies and Solutions for Handling of Micro Components";
    Vortrag: 4M Workshop - Micro and Nano Technologies and Multifunctional Materials For Life quality and Industry applications, Sinaia, Rumänien (eingeladen); 30.09.2005; in: "Micro and nanotechnologies and Multifunctional Materials For Life quality and Industry applications", W. Brenner, F. Sümecz, I. Giouroudi, D. Andrijasevic (Hrg.); (2005).

    Zusätzliche Informationen
  939. W. Brenner, F. Sümecz, A. Almansa:
    "Advanced Methods and Tools for Handling and Assembly in Microtechnology - the FP6 Marie Curie Training Network";
    Vortrag: 4M Workshop - Micro and Nano Technologies and Multifunctional Materials For Life quality and Industry applications, Sinaia, Rumänien; 30.09.2005; in: "Micro and nanotechnologies and Multifunctional Materials For Life quality and Industry applications", (2005).

    Zusätzliche Informationen
  940. W. Brenner, F. Sümecz:
    "Evaluation of Rotating Microsystems";
    Vortrag: 10th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, USA; 07.03.2004 - 11.03.2004; in: "Proceedings of ISROMAC10", D. Bohn (Hrg.); (2004), ISBN: 3-00-013150-7; S. 219.
  941. W. Brenner, D. Petrovic, A. Vujanic:
    "Design and Testing of a Vascular Anchoring System";
    Vortrag: EMBEC'02 2nd European Medical & Biological Engineering Conference, Vienna; 04.12.2002 - 08.12.2002; in: "International Federation for Medical and Biological Engineering", H. Hutten, P. Krösl (Hrg.); Verlag der Technischen Universität Graz, (2002), ISBN: 3-901351-62-0; S. 634 - 635.
  942. W. Brenner, D. Petrovic, A. Vujanic:
    "Design Methodology Illustrated by an Intravascular Device";
    Vortrag: Advanced Engineering Design AED, Prague - Czech Republic; 01.06.2003 - 04.06.2003; in: " 3rd International Conference on Advanced Engineering Design AED", (2003), ISBN: 80-86059-35-9; S. 133.
  943. W. Brenner, S. Mitic, A. Vujanic, G. Popovic:
    "Aktoren für flächige Braille-Displays (Micro-Actuation Principles for High-Resolution Graphic Tactile Displays)";
    Vortrag: Informationstagung Mikroelektronik (ME), Wien; 10.10.2001 - 11.10.2001; in: "ME 01", D. Donhoffer, G. Fiedler (Hrg.); Im Eigenverlag des ÖVE, Nr. 26/Wien (2001), ISBN: 3-85133-022-6; S. 385 - 392.
  944. W. Brenner, S. Mitic, A. Vujanic, G. Popovic:
    "Micro-Actuation Principles for High-Resolution Graphic Tactile Displays";
    Vortrag: EUROHAPTICS 2001, Birmingham; 02.07.2001 - 03.07.2001; in: "Eurohaptics 2001", C. Baber, M. Faint, S. Wall, A. Wing (Hrg.); (2001), S. 93 - 98.
  945. W. Brenner, S. Mitic, A. Vujanic, G. Popovic:
    "Micro-Actuation Principles for High-Resolution Graphic Tactile Displays";
    Vortrag: 7th International Conference on New Actuators, Bremen, D; 19.06.2000 - 21.06.2000; in: "Proc. of 7th International Conference on New Actuators", (2000), S. 567 - 570.
  946. W. Brenner, S. Mitic, R. Ouchkalov, G. Popovic, A. Vujanic, R. Medek:
    "An Overview of the Micro Actuation Principles with Application on Tactile Graphic Displays";
    Vortrag: Micromechanics Europe MME 99, Gif-sur-Yvette, France; 27.09.1999 - 28.09.1999; in: "Proc. of Micromechanics Europe", (1999), S. 247 - 250.
  947. W. Brenner, S. Mitic, R. Ouchkalov, G. Popovic, A. Vujanic, R. Medek:
    "Development of microactuators for Tactile Graphic Displays";
    Vortrag: International Conference on Microelectronics (MIEL), Nis, Jugoslavia; 14.05.2000 - 17.05.2000; in: "Proc. Of MIEL", (2000), S. 573 - 576.
  948. W. Brenner, S. Mitic, R. Ouchkalov, G. Popovic, A. Vujanic:
    "Micro Actuation Principles for Tactile Graphic Displays (State of the Art and Recent Efforts)";
    Vortrag: EMBEC 1999 European Medical and Biological Engineering Conference, Vienna, Austria; 04.11.1999 - 07.11.1999; in: "Proc.of EMBEC 19999", (1999), S. 1120 - 1121.
  949. W. Brenner, G. Haddad, A. Vujanic, G. Popovic:
    "Micro Torque Measurement Based on the Cable Brake Principle";
    Vortrag: World Tribology Congress, Wien; 03.09.2001 - 07.09.2001; in: "Abstracts of Papers of 2nd World Tribology Congress 2001", F. Franek, W.J. Bartz, A. Pauschitz (Hrg.); Österreichische Tribologische Gesellschaft, Wien (2001), ISBN: 3-901657-08-8; S. 857.

    Zusätzliche Informationen
  950. W. Brenner, G. Haddad, A. Vujanic:
    "Test Devices for Mini-and Micromotors";
    Poster: XVI IMEKO World Congress 2000, Vienna, Austria; 25.09.2000 - 28.09.2000; in: "Proc.of XVI IMECO Congress", (2000), S. 331 - 336.
  951. W. Brenner, G. Haddad, H. Rennhofer, M. Rennhofer, A. Vujanic, G. Popovic:
    "New types of Silicon Torsion Microspring and their Characterisation"";
    Vortrag: Integration and Packaging of MEMS/MOEMS, Paris, France; 09.05.2000 - 11.05.2000; in: "Proc. of Desing", (2000), S. 3647 - 3653.
  952. W. Brenner, G. Haddad, G. Popovic, A. Vujanic:
    "Principles of Torque Measurement for Rotating Microsystems";
    Vortrag: 5th International Conference On Advanced Manufacturing Systems, Udine, Udine, Italy; 03.06.1999 - 04.06.1999; in: "Proc. of 5th International Conference On Advanced Manufacturing Systems", (1999), S. 721 - 728.
  953. W. Brenner, G. Haddad, D. Petrovic, G. Popovic, E. Chatzitheodoridis, A. Vujanic:
    "Test Devices for Rotating Microactuators";
    Vortrag: 8th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honululu, Hawaii, USA; 26.03.2000 - 30.03.2000; in: "Proc. of 8th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery", (2000), ISBN: 0-9652469-9-x; S. 1073 - 1078.
  954. W. Brenner, I. Giouroudi, D. Andrijasevic:
    "Handling and Assembly in Micro Domain";
    Vortrag: 9th International Scientific Conference on Flexible Technologies - mna 2006, Novi Sad; 15.06.2006 - 16.06.2006; in: "mna 2006 - Proceedings", (2006), ISBN: 86-85211-96-4; S. 155 - 156.

    Zusätzliche Informationen
  955. W. Brenner, N. Bednar, P. Biermayr, N. Adamovic:
    "Standardization and Life Cycle Cost Assessment Approach in Circular Economy for Photovoltaic Waste";
    Vortrag: 3rd International Conference on Smart and Sustainable Technologies (SpliTech), Split, Kroatien; 26.06.2018 - 29.06.2018; in: "Proceedings of 3rd International Conference on Smart and Sustainable Technologies", (2018), ISBN: 978-1-5386-6296-0; S. 1 - 6.

    Zusätzliche Informationen
  956. W. Brenner, J. Baret, A. Stelmach:
    "Standardisation in Microdimension";
    Vortrag: Integration and Packaging of MEMS/MOEMS, Paris, France; 09.05.2000 - 11.05.2000; in: "Proc. of Spie", (2000), ISBN: 0-8194-3645-3; S. 218 - 224.
  957. W. Brenner, D. Andrijasevic, F. Sümecz, A. Almansa:
    "Advanced Methods and Tools for Handling and Assembly in Microtechnology - the FP6 Marie-Curie-Resarch Training Network ASSSEMIC";
    Poster: MNE2005 - 31st International Conference on Micro- and Nano-Engineering 2005, Wien; 19.09.2005 - 22.09.2005; in: "MNE2005 - 31st Interantional Conference on Micro- and Nano--Engineering 2005", (2005).

    Zusätzliche Informationen
  958. W. Brenner, D. Andrijasevic, F. Sümecz:
    "European-Scale Training in Microhandling and -assembly";
    Vortrag: EUSPEN 2005 - 5th International conference and 7th annual general meeting of the european society for precision engineering and nanotechnology, Le Corum, Montpellier, France; 08.05.2005 - 11.05.2005; in: "EUSPEN - Conference proceedings", (2005), ISBN: 92-990035-0-5; S. 479 - 482.

    Zusätzliche Informationen
  959. W. Brenner, A. Almansa, F. Sümecz:
    "2007 Results of the FP6 Marie Curie Research Training Network ASSEMIC";
    Vortrag: 4M Cell handling and Actuation Follow-up Workshop, Wien; 19.06.2008 - 20.06.2008; in: "4M Cell handling and Actuation Follow-up Workshop", (2008).

    Zusätzliche Informationen
  960. W. Brenner, A. Almansa, F. Sümecz:
    "Advanced Methods and Tools for Handling and Assembly in Microtechnology - a European approach in FP6";
    Vortrag: EMBEC '05 - 3rd European Medical & Biological Engineering Conference, IFMBE European Conference on Biomedical Engineering, Prague, Czech Republic; 20.11.2005 - 25.11.2005; in: "IFMBE Proceedings", IFMBE Roceedings, Volume 11, 2005 (2005), ISSN: 1727-1983; 6 S.

    Zusätzliche Informationen
  961. W. Brenner, A. Almansa, F. Sümecz:
    "Advanced Methods and Tools for Handling and Assembly in Microtechnology - A European Approach in the Frame of the FP6 Marie Curie Research Training Network ASSEMIC";
    Vortrag: IEEE Conference, Mechatronics & Robotics '04, Aachen, Germany; 13.09.2004 - 15.09.2004; in: "Proceeding of Mechatronics & Robotics '04", P. Drews (Hrg.); (2004), ISBN: 3-938153-30-x; S. 1057 - 1062.
  962. W. Brenner, A. Almansa, F. Sümecz:
    "Advanced Methods and Tools for Handling and Assembly in Microtechnology - a European Approach in the Frame of the FP6 Marie Curie Research Training Network ASSEMIC";
    Poster: AED 2006 - Advanced Engineering Design, Prague, Czech Republic; 11.06.2006 - 14.06.2006; in: "AED 2006 - Advanced Engineering Design", (2006), Paper-Nr. P5.10, 8 S.

    Zusätzliche Informationen
  963. W. Brenner, A. Almansa, F. Sümecz:
    "ASSEMIC advanced methods and tools for handling and assembly in micro technology - An FP6 Marie Curie Research Training Network";
    Vortrag: 4th International Conference of the European society for precision engineering and nanotechnology, Glasgow, Scotland; 31.05.2004 - 02.06.2004; in: "Proceedings of the 4th euspen International Conference", D. Chetwynd, M. Bonis, E. Brinksmeier, T. Burke, J. Corbett, D. Corker, F. Delbressine, J. Evans, R. Hocken, L. Kudla, R. Leach, G. Peggs, P. Schellekens, S. Kiyono, P. McKeown, S. Kim, E. Thwaite, M. Ward, M. Weck (Hrg.); (2004), ISBN: 1861941080; S. 115 - 116.
  964. W. Brenner, N. Adamovic, J. Matovic, L. Federzoni:
    "Communication of Nano Technology based Applications using the Example of the FP7 NMP Project MultiPlat";
    Vortrag: SciCom10 - Möglichkeiten und Grenzen der Wissenschaftkommunikation, TU-Wien, Wien, A; 10.11.2010 - 12.11.2010; in: "SciCom10 - Möglichkeiten und Grenzen der Wissenschaftkommunikation", (2010).

    Zusätzliche Informationen
  965. W. Brenner, N. Adamovic, J. Matovic, L. Federzoni:
    "The Development of Biomimetic Proton Conductive Membranes in the Frame of the European FP7 Project MultiPlat";
    Vortrag: 4M 2011 - 8th International Conference on Multi-Material Micro Manufacture, Stuttgart, D; 08.11.2011 - 10.11.2011; in: "4M 2011 - Proceedings of the 8th International Conference on Multi-Material Micro Manufacture", Research Publishing, (2011), ISBN: 978-981-08-6555-9; S. 221 - 224.

    Zusätzliche Informationen
  966. W. Brenner, N. Adamovic, J. Matovic, L. Federzoni:
    "The FP7 NMP Project MultiPlat: Gender Issues of a Technology Oriented Research Project";
    Poster: 2nd European Gender Summit 2012, Brussles, B; 29.11.2012 - 30.11.2012; in: "2nd European Gender Summit 2012", European Science Foundation, (2012).

    Zusätzliche Informationen
  967. W. Brenner, N. Adamovic:
    "A Circular Economy for Photovoltaic Waste - the Vision of the European Project CABRISS";
    Vortrag: mipro 2017, Opatja, Kroatien; 22.05.2017 - 26.05.2017; in: "mipro2017 proceedings", (2017), ISSN: 1847-3946; S. 154 - 159.

    Zusätzliche Informationen
  968. W. Brenner, N. Adamovic:
    "Ästhetik und Nachhaltigkeit -Anforderungen an PV-Lösungen in Smart Cities";
    Poster: DGM Werkstoffwoche Dresden 2019, Dresden, D; 18.09.2019 - 20.09.2019; in: "DGM Werkstoffwoche Dresden 2019", (2019), S. 1.
  969. W. Brenner, N. Adamovic:
    "Benefits of Standardisation in the Research and Innovation Process of the FP7 NMP Project SolarDesign";
    Vortrag: 37th International Convention on Information and Communication Technology, Electronics and Microelectronics (MIPRO 2014), Telecommunications & Information (CTI), Opatija, Croatia; 26.05.2014 - 30.05.2014; in: "mipro proceedings", IEEE, (2014), ISSN: 1847-3946; Paper-Nr. inova_01_2429, 5 S.

    Zusätzliche Informationen
  970. W. Brenner, N. Adamovic:
    "Collaborative research in the Frame of the FP7 NMP Project SolarDesign";
    Poster: The 6th International Conference & Workshop REMOO-2016, Budva, Montenegro; 23.09.2015 - 24.09.2015; in: "Technological, Modelling and Experimental Achievements in Energy Generation Systems", (2015), ISBN: 978-3-9816624-8-1; S. 9.01.
  971. W. Brenner, N. Adamovic:
    "Creating Sustainable Photovoltaics for Smart Cities";
    Vortrag: ENTRENOVA, Rovinj, Kroatien; 12.09.2019 - 14.09.2019; in: "Book of abstracts oft he ENTRENOVA", IRENET, Croatia, (2019), ISSN: 1849-7950; S. 531 - 535.

    Zusätzliche Informationen
  972. W. Brenner, N. Adamovic:
    "Creating Sustainable Solutions for Photovoltaics";
    Vortrag: 42nd International Convention mipro 2019, Opatija, Croatia; 20.05.2019 - 24.05.2019; in: "Proceedings of 42nd International Convention mipro 2019", (2019), ISSN: 1847-3946; S. 1 - 6.

    Zusätzliche Informationen
  973. W. Brenner, N. Adamovic:
    "Dissemination And Training Efforts In The Frame Of European Research Projects";
    Vortrag: INTE--ITICAM 2019, Prague, Czech Republi; 03.07.2019 - 05.07.2019; in: "INTE--ITICAM 2019 - Proceedings Book", (2019), ISSN: 2146-7358; S. 197 - 201.

    Zusätzliche Informationen
  974. W. Brenner, N. Adamovic:
    "Flexible Cigs Solar Modules For Design Oriented Applications (fp7 Solardesign)";
    Poster: Werkstoffwoche 2015, Dresden, Deutschland; 14.09.2015 - 17.09.2015; in: "Programm zur Werkstoffwoche 2015", (2015).

    Zusätzliche Informationen
  975. W. Brenner, N. Adamovic:
    "From Framework programs to Teaching: Intergrating Experience from European Research Projects in Teaching Engineering";
    Vortrag: 43rd International Convention on Information, Communication and Electronic Technology (MIPRO) - 2020, Opatija, Croatia; 28.09.2020 - 02.10.2020; in: "43rd International Convention on Information, Communication and Electronic Technology (MIPRO)- 2020", IEEE, (2020), S. 1503 - 1508.
  976. W. Brenner, N. Adamovic:
    "Gender Aspects of the FP7 NMP Project SolarDesign";
    Poster: Gender Summit Europe, Brüssel, B; 30.06.2014 - 01.07.2014; in: "Abstract Compendium", EC, (2014).
  977. W. Brenner, N. Adamovic:
    "Innovative Approaches of a Circular Economy for Photovoltaic Waste";
    Vortrag: ENTRENOVA, Dubrovnik, Kroatien; 06.09.2017 - 08.09.2017; in: "Book of abstracts oft he ENTRENOVA", IRENET, Zagreb, Croatia, (2017), ISSN: 1849-7969; S. 51.
  978. W. Brenner, N. Adamovic:
    "Integrating European Research Projects in Teaching Engineering";
    Vortrag: Entrenova-Enterprise Research Innovation Conference 2020, Split, Croatia; 10.09.2020 - 12.09.2020; in: "Book of Abstracts of Entrenova-Enterprise Research Innovation Conference", Vol. 6, No. 1 (2020), ISSN: 1849-7969; S. 54.
  979. W. Brenner, N. Adamovic:
    "Integration Of Standardization For Bridging Research And Industry In The Fp7 Nmp Project Solar Design";
    Vortrag: REMOO 2015, Budva, Montenegro; 23.09.2015 - 24.09.2015; in: "Book of Abtracts", Get It Published, (2015), ISBN: 978-3-9816624-6-7.

    Zusätzliche Informationen
  980. W. Brenner, N. Adamovic:
    "spects of Sustainability for Integrated Photovoltaics";
    Vortrag: 5th Symposium on Urban Mining and Circular Economy, virtual event Venice, Italy; 18.11.2020 - 20.11.2020; in: "Proceedings SUM2020", CISA Publisher, (2020).
  981. W. Brenner, N. Adamovic:
    "Standardisierung in der Implementierung einer Kreislaufwirtschaft für PV-Abfälle - das H2020 Projekt CABRISS";
    Poster: Werkstoffwoche Dresden 2017, Dresden, Deutschland; 27.09.2017 - 29.09.2017; in: "Werkstoffwoche Dresden 2017", (2017), S. 1.
  982. W. Brenner, N. Adamovic:
    "Standardization as a Tool for Promoting Innovation - the example of the H2020 Project CABRISS";
    Poster: ENTRENOVA, Split, Kroatien; 06.09.2018 - 08.09.2018; in: "Book of abstracts oft the ENTRENOVA ´18 - Enterprise Research Innovation Conference", IRENET, Zagreb, Croatia, Vol. 4/ No. 1 (2018), ISSN: 1849-7969; S. 74.

    Zusätzliche Informationen
  983. W. Brenner, N. Adamovic:
    "Standardization as a Tool for Promoting Innovation and Commercialization of a Circular Economy for PV Waste - the Example of the European H2020 Project CABRISS";
    Vortrag: MIPRO 2018, Opatija/Croatia; 21.05.2018 - 25.05.2018; in: "41°", (2018), S. 122 - 127.

    Zusätzliche Informationen
  984. W. Brenner, N. Adamovic:
    "Standardization Contributing To A Circular Economy For Photovoltaic Waste";
    Poster: The 8th International Conference & Workshop REMOO 2018, Venedig, Italien; 29.05.2018 - 31.05.2018; in: "Book of Abstracts of the 8th International Conference & Workshop REMOO 2018", Get it Published Verlag, Erlangen (2018), ISBN: 978-3-9818275-6-9; S. 14.062.

    Zusätzliche Informationen
  985. W. Brenner, N. Adamovic:
    "The European Project SolarDesign Illustrating the Role of Standardization in the Innovation System";
    Vortrag: The 39th International ICT Convention - MIPRO 2016, Opatija, Croatia; 30.05.2016 - 03.06.2016; in: "Proceedings of 39th International Convention (IEEE, MIPRO)", IEEE, (2016), ISBN: 978-1-5090-2543-5; S. 152 - 157.

    Zusätzliche Informationen
  986. W. Brenner, N. Adamovic:
    "Thin-film CIGS solar modules for design driven applications in the frame of the FP7 NMP project SolarDesign";
    Vortrag: 38th International Convention on Information and Communication Technology, Electronics and Microelectronics (MIPRO), 2015, Opatija, Croatia; 25.05.2015 - 30.05.2015; in: "MIPRO 2015", IEEE, (2015), S. 131 - 136.

    Zusätzliche Informationen
  987. W. Brenner:
    "Ein konstruktionsmethodischer Ansatz zur Lösungsfindung für alternative Stents (Gefäßendoprothesen)";
    Vortrag: Symposium "Methodisches Konstruieren", Graz; 24.03.2004; in: ""Methodisches Konstruieren"", M. Trzesniowski (Hrg.); (2004), S. 1 - 13.
  988. M. Brehl, M. Cicconi, A. Veber, A. Hajian, U. Schmid, D. De Ligny:
    "Structural investigation of glasses in the BaO-B2O3-SiO2 system with coupled Raman/Brillouin spectroscopy";
    Vortrag: 15th International Conference on the Physics of Non-Crystalline Solids & 14th European Society of Glass Conference (PNCS-ESG 2018), Saint Malo, Frankreich; 09.07.2018 - 13.07.2018; in: "Program", (2018), S. 396 - 397.
  989. G. Brasseur, P.L. Fulmek, W. Smetana:
    "Virtual Rotor Grounding of Capacitive Angular-Position Sensors";
    Vortrag: IMTC IEEE Conference on Instrumentation and Measurement Technology, Baltimore Hilton and Towers, Maryland, USA; 01.06.2000; in: "Proceedings IEEE Transactions on Instrumentation and Measurement", (2000).
  990. G. Brasseur, P.L. Fulmek, W. Smetana:
    "Virtual Rotor Grounding of Capacitive Angular-Position Sensors";
    Vortrag: 16th IEEE Instrumentation & Measurement Technology Conference (IMTC 99), Venice, Italy; 24.05.1999 - 26.05.1999; in: "Proceedings of the 16th IEEE Instrumentation and Measurement Technology Conference (IMTC 99)", IEEE Transactions on Instrumentation and Measurement Technology, 3 (1999), S. 1367 - 1370.
  991. M. Brandl, K.-H. Kellner, M. Mündlein, J. Nicolics:
    "Low-Cost Wireless Transponder System for Industrial and Biomedical Applications";
    Vortrag: Int.Conf. on Information, Communication and Signal Processing (ICICS), Bangkok, Thailand; 06.12.2005 - 09.12.2005; in: "Proceedings ICICS 2005", (2005), S. 1444 - 1447.
  992. S. Bou, D Fratila, A. Boglea, D. Andrijasevic, A. Almansa, W. Palfinger, W. Mann, A. Olowinsky, W. Brenner, R. Möst, Z. Rozynek:
    "Technologies for Microassembly Selected Methods";
    Vortrag: 4M 2007 - Third International conference on multi-material micro manufacture, Borovets, Bulgaria (eingeladen); 03.10.2007 - 05.10.2007; in: "4M 2007 - Third international Conference on multi-material micro manufacture - Proceedings", (2007), ISBN: 978-1904445-53-1; S. 55 - 58.

    Zusätzliche Informationen
  993. G. Bosnakoski, W. Gschohsmann, W. Smetana:
    "Characterization of Ferroelectric Material for Electronic Devices";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Budapest, Hungary; 07.05.2008 - 11.05.2008; in: "Abstract Proceedings - Reliability and Life-time Prediction", (2008), ISBN: 978-963-06-4915-5; S. 88 - 89.
  994. C. Bolzmacher, K. Bauer, U. Schmid, M. Hafez, H. Seidel:
    "Robust Superelastic, Metallic Amplification Unit for Piezoelectric Microactuators";
    Vortrag: SPIE Europe: Microtechnologies for the New Millennium, Dresden, Deutschland; 04.05.2009 - 08.05.2009; in: "Proceedings of SPIE", Society of Photo-Optical Instrumentation Engineers (SPIE, 7362-7366 (2009).

    Zusätzliche Informationen
  995. T. Bohnenberger, U. Schmid:
    "Thin CNT-based Films Deposited with the Layer-by-Layer Technique for Supercapacitor Applications";
    Vortrag: Eurosensors XXIX, Freiburg, D; 06.10.2015 - 09.10.2015; in: "Proceedings of Eurosensors XXIX", Procedia Engineering, Vol. 120 (2015), ISSN: 1877-7058; S. 1037 - 1041.

    Zusätzliche Informationen
  996. T. Bohnenberger, J. Matovic, U. Schmid:
    "Comparison of Drop Deposition and Layer-by-layer Approach to Form Thin Carbon-nanotube-membranes as Catalyst Layer in Fuel Cells";
    Vortrag: 4M 2011 - 8th International Conference on Multi-Material Micro Manufacture, Stuttgart, D; 08.11.2011 - 10.11.2011; in: "4M 2011 - Proceedings of the 8th International Conference on Multi-Material Micro Manufacture", Research Publishing, (2011), ISBN: 978-981-07-0319-6; S. 234 - 237.

    Zusätzliche Informationen
  997. M. Böhler, G. Reinisch:
    "Ein standardisiertes Verfahren zur Entnahme und Analyse von Hüftendoprothesen";
    Vortrag: Jahrestagung der Österreichischen Gesellschaft für Orthopädie und Orthopädische Chirurgie, Salzburg; 29.11.2001 - 01.12.2001; in: "26. ÖGO-Jahrestagung", (2001), S. 170.
  998. N. V. Blaz, L. Zivanov, G. Radosavljevic, M. Unger, W. Smetana:
    "Determination of electric and magnetic characteristics of basic electronic materials";
    Vortrag: Junior Scientist Conference 2010 (JSC 2010), Vienna, Austria; 07.04.2010 - 09.04.2010; in: "Book of Abstracts", (2010), ISBN: 978-3-200-01797-9; S. 163 - 164.
  999. N. V. Blaz, G. Radosavljevic, L. Zivanov, W. Smetana:
    "Characterisation of Dielectric LTCC Tapes Using the Capacitance Method";
    Poster: 32th International Semiconductor Conference CAS 2009, Sinaia, Romania; 12.10.2009 - 14.10.2009; in: "Conference Proceedings", (2009), ISBN: 978-1-4244-4413-7; S. 447 - 450.
  1000. N. V. Blaz, A. Maric, L. Zivanov, G. Radosavljevic:
    "Performance Improvement of LTCC Capacitive Displacement Sensor";
    Poster: 36th International Spring Seminar on Electronics Technology - ISSE 2013, Alba Iulia, Romania; 08.05.2013 - 12.05.2013; in: "Book of Abstracts", (2013), ISBN: 978-606-613-064-6; S. 188 - 189.
  1001. N. V. Blaz, A. Maric, S. Toskov, G. Miskovic, G. Radosavljevic, L. Zivanov:
    "Capacitive Sensor for Quantity Detection of Known Liquid Present in Distilled Water";
    Vortrag: 37th International Spring Seminar on Electronics Technology, Dresden; 07.05.2014 - 11.05.2014; in: "Proceedings 37th Int. Spring Seminar on Electronics Technology", (2014), ISBN: 978-1-4799-4455-2; S. 202 - 203.
  1002. N. V. Blaz, A. Maric, G. Radosavljevic, L. Zivanov:
    "Inductive Displacement Sensor Embedded in LTCC Packaging";
    Poster: 10th European Conference on Magnetic Sensors and Actuators (EMSA 2014), Vienna, Austria; 06.07.2014 - 09.07.2014; in: "Proceedings", (2014), S. 76.
  1003. N. V. Blaz, M. Kisic, C. Zlebic, G. Miskovic, G. Radosavljevic, L. Zivanov:
    "Displacement Sensor Based on Interdigital Capacitor";
    Vortrag: 38th International Spring Seminar on Electronics Technology-ISSE 2015, Eger, Hungary; 01.05.2015 - 02.05.2015; in: "Book of Abstract", Budapest University of Technology and Economics, (2015), ISBN: 978-963-313-177-0; S. 220 - 221.
  1004. N. V. Blaz, M. Kisic, C. Zlebic, G. Miskovic, G. Radosavljevic, L. Zivanov:
    "Displacement Sensor Based on Interdigital Capacitor";
    Vortrag: 38th International Spring Seminar on Electronics Technology-ISSE 2015, Eger, Hungary; 06.05.2015 - 10.05.2015; in: "Proceedings", Budapest University of Technology and Economics, (2015), ISBN: 978-1-4799-8860-0; S. 477 - 481.
  1005. N. Blaz, V. Radonic, G. Radosavljevic, L. Zivanov, W. Smetana:
    "Capacitance method for characterisation of dielectric LTCC tapes";
    Vortrag: 1st ReCIMiCo Workshop on Design and Characterization of Integrated Microsystems and Components, Novi Sad, Serbien; 29.09.2008 - 30.09.2008; in: "Proceedings of 1st ReCIMiCo Workshop", (2008), S. 109 - 115.
  1006. N. Blaz, G. Miskovic, A. Maric, M. Damnjanovic, G. Radosavljevic, L. Zivanov:
    "LC Displacement Sensor in PCB Technology";
    Vortrag: Eureka E!4570 IPCTECH New Generation of 3-D Integrated Passive Components & Microsystems in LTCC-Technology Meeting, Krakow, Poland; 28.03.2012 - 29.03.2012; in: "Proceedings", (2012), S. 15.
  1007. N. Blaz, G. Miskovic, A. Maric, M. Damnjanovic, G. Radosavljevic, L. Zivanov:
    "Modeling and Characterization of LC Displacement Sensor in PCB Technology";
    Poster: 35th International Spring Seminar on Electronics Technology (ISSE 2012), Bad Aussee; 09.05.2012 - 13.05.2012; in: "Book of Abstracts", (2012), ISBN: 978-3-85465-015-7; S. 168 - 169.
  1008. N. Blaz, G. Miskovic, A. Maric, M. Damnjanovic, G. Radosavljevic, L. Zivanov:
    "Various designs of meander inductor and its influence on LC resonant displacement sensor";
    Vortrag: International Conference on Materials and Applications for Sensors and Transducers, Budapest, Hungary; 24.05.2012 - 28.05.2012; in: "Conference Proceedings", (2013), S. 235 - 238.
  1009. N. Blaz, A. Maric, L. Zivanov, I. Atassi, W. Smetana, G. Radosavljevic:
    "Karakterizacija feritnih LTCC uzoraka na različitm temperaturama u sirokom frekventnom opsegu";
    Poster: 56th Conference for Electronics, Telecommunications, Computers, Automation and Nuclear Engineering - ETRAN, Zlatibor, Serbia; 11.06.2012 - 14.06.2012; in: "Conference Proceedings", (2012), ISBN: 978-86-80509-67-9; S. 1 - 4.
  1010. N. Blaz, A. Maric, G. Radosavljevic, L. Zivanov:
    "Capacitive Displacement Sensor Embedded in LTCC Packaging";
    Vortrag: 18th International Symposium for Design and Technology in Electronic Packaging (SIITME 2012), Alba Iulia, Romania; 25.10.2012 - 28.10.2012; in: "IEEE Xplore Conference Proceedings", (2012), S. 1 - 4.
  1011. N. Blaz, A. Maric, G. Radosavljevic, N. Mitrovic, I. Atassi, W. Smetana, L. Zivanov:
    "Wide Frequency Characterization of Magnetic Properties of Commercial LTCC Ferrite Material";
    Vortrag: IMAPS/ACerS 7th International Conference and Exhibition on Ceramic Interconnect and Ceramic Microsystems Technologies (CICMT 2011), San Diego, California, USA; 05.04.2011 - 07.04.2011; in: "Conference Proceedings", (2011), ISBN: 0-930815-92-0; 8 S.
  1012. N. Blaz, A. Maric, G. Radosavljevic, I. Atassi, W. Smetana, L. Zivanov:
    "Comparison of Magnetic Characteristics and Structural Properties of Commercially Available Ferritic LTCC Materials";
    Poster: IMAPS/ACerS 8th International CICMT Conference and Exhibition (2012), Erfurt, D; 16.04.2012 - 19.04.2012; in: "Proc. of 8th Conf. and Exhibition on Ceramic Interconnect and Ceramic Microsystems Technology (CICMT)", (2012), S. 359 - 364.
  1013. N. Blaz, A. Maric, I. Atassi, G. Radosavljevic, L. Zivanov, H. Homolka, W. Smetana:
    "Complex permeability changes of ferritic LTCC samples with variation of sintering temperatures";
    Poster: 20th International Conference on Soft Magnetic Materials, Kos Island, Greece; 18.09.2011 - 22.09.2011; in: "Conference Proceedings", (2011), ISBN: 978-960-9534-14-7; S. 252.
  1014. A. Bittner, F. Steinhäußer, A Talai, A Koelpin, R. Weigel, Th. Rittweg, D. Schwanke, G. Sandulache, W. Hansal, U. Schmid:
    "Modellierung nasschemischer Porosizierverfahren auf LTCC für elektromagnetische Hochfrequenz-Feldsimulation";
    Vortrag: MikroSystemTechnik Kongress 2015, Karlsruhe, D; 26.10.2015 - 28.10.2015; in: "Proceedings MikroSystemTechnik Kongress 2015", VDE Verlag GmbH, Berlin, (2015), ISBN: 978-3800741007; S. 258 - 261.

    Zusätzliche Informationen
  1015. A. Bittner, H. Seidel, R. Kautenburger, A. Roosen, U. Schmid:
    "Investigation on the Porosification Behaviour of Fired LTCC Substrates";
    Vortrag: IMAPS/ACerS 5th International Conference and Exhibition on Ceramic Interconnect and Cermic Microsystems Technologies (CICMT), Denver, Colorado - USA; 21.04.2009 - 23.04.2009; in: "Proceedings of IMAPS/ACerS 2009", IMAPS, (2009), S. 238 - 244.

    Zusätzliche Informationen
  1016. A. Bittner, U. Schmid:
    "Impact of Metallization Properties on the High Frequency Performance of Coplanar Waveguides on LTCC";
    Poster: IMAPS - Electronic Devices and Systems, Brno, CZ; 28.06.2012 - 29.06.2012; in: "Proceedings Electronic Devices and Systems", (2012), S. 224 - 228.

    Zusätzliche Informationen
  1017. A. Bittner, U. Schmid:
    "Lokale Modifikation dielektrischer Eigenschaften von glaskeramischen Hochfrequenzsubstraten";
    Vortrag: Mikrosystemtechnik Kongress 2011, Darmstadt; 10.10.2011 - 12.10.2011; in: "Mikrosystemtechnik Kongress 2011 - Proceedings", VDE VERLAG GMBH, Berlin und Offenbach, Bismarckstraße 33, 10625 Berlin, (2011), ISBN: 978-3-8007-3367-5; S. 149 - 152.

    Zusätzliche Informationen
  1018. A. Bittner, U. Schmid:
    "Modified Organic low-k Dielectric Layers on Fired LTCC Substrates";
    Vortrag: IMAPS/ACerS 8th International CICMT Conference and Exhibition (2012), Erfurt, D; 16.04.2012 - 19.04.2012; in: "Proceedings", (2012), S. 394 - 399.
  1019. A. Bittner, F Prewein, U. Schmid:
    "Impact of Patterning Technique on the Long Term Stability of Ag Thin Films";
    Poster: EUROSENSORS 2014 - 28th European Conference on Solid-State Transducers, Brescia, I; 07.09.2014 - 10.09.2014; in: "Procedia Engineering", Elsevier, 87 (2014), ISSN: 1877-7058; S. 116 - 119.

    Zusätzliche Informationen
  1020. A. Bittner, S. Klein, H. Seidel, D. Schwanke, U. Schmid:
    "Einfluss der Abscheideparameter auf die Mikrostruktur von Silberdünnfilmen auf LTCC";
    Poster: Mikrosystemtechnik Kongress 2009, Berlin, D; 12.10.2009 - 14.10.2009; in: "Mikrosystemtechnik Kongress 2009 - Proceedings", VDE Verlag, (2009), ISBN: 978-3-8007-3183-1.

    Zusätzliche Informationen
  1021. A. Bittner, S. Klein, H. Seidel, U. Schmid:
    "Reliability of Ag Thin Films Sputter Deposited on Silicon and Ceramic Based Substrates";
    Vortrag: SPIE Europe: Microtechnologies for the New Millennium, Dresden, Deutschland; 04.05.2009 - 08.05.2009; in: "Proceedings of SPIE", Society of Photo-Optical Instrumentation Engineers (SPIE, 7362-7366 (2009), 7 S.

    Zusätzliche Informationen
  1022. A. Bittner, A. Backes, U. Schmid:
    "Elektromigrationsverhalten von Silberdünnfilmen auf LTCC";
    Poster: Mikrosystemtechnik Kongress 2013, Aachen, D; 14.10.2013 - 16.10.2013; in: "Proceedings MikroSystemTechnik Kongress 2013", VDE VERLAG GMBH, Berlin und Offenbach, Bismarckstraße 33, 10625 Berlin, (2013), ISBN: 978-3-8007-3555-6; S. 729 - 732.

    Zusätzliche Informationen
  1023. A. Bittner, A. Backes, U. Schmid:
    "Impact of Crystal Orientation on the Electromigration Resistance and Long Term Stability of Sputtered Ag Thin Films on LTCC";
    Vortrag: Smart Systems Integration 2011 (SSI), Dresden, D; 22.03.2011 - 23.03.2011; in: "Smart Systems Integration 2011 (SSI) - 5th European Conference & Exhibition on Integration Issues of Miniaturized Systems - MEMS, MOEMS, ICs and Electronic Components", VDE Verlag Gmbh, Berlin (2011), ISBN: 978-3-8007-3324-8; S. 1 - 6.
  1024. M. Bilinski, E. Eisermann, K. Jones-Williams, W. Smetana, M. Unger, J. Withmarsh:
    "Thick film pastes for the manufacture of low cost, insulated aluminium substrates for use as integrated heat sinks for high intensity LEDs";
    Poster: International Conference of IMAPS Poland Chapter, Pultusk, Poland; 21.09.2008 - 24.09.2008; in: "Abstracts Proceedings of the XXXII International Conference of IMAPS Poland Chapter", (2008), ISBN: 978-83-917701-6-0; 1 S.
  1025. C. Bienert, A. Roosen, M. Grosser, V. Ziegler, U. Schmid:
    "Electrical and Mechanical Characterization of Low Temperature Co-fired Ceramics for High Temperature Sensor Applications";
    Vortrag: SPIE Europe: Microtechnologies for the New Millennium, Dresden, Deutschland; 04.05.2009 - 08.05.2009; in: "Proceedings of SPIE", Society of Photo-Optical Instrumentation Engineers (SPIE, 7362-7366 (2009).

    Zusätzliche Informationen
  1026. C. Besser, N. Dörr, F. Novotny-Farkas, F. Franek:
    "Optimierung von Motorölen mit erhöhter Biokraftstoff-Kompatibilität";
    Vortrag: 1. Györer Tribologie Tagung, Györ, H; 13.09.2010; in: "1. GyŐrer Tribologie Tagung", UNIVERSITAS-GYŐR Nonprofit Kft., (2010), ISBN: 978-963-9819-57-3; S. 105 - 116.

    Zusätzliche Informationen
  1027. D. Belavic, M. Hrovat, M. Santo Zarnik, J. Cilensek, J. Kita, L. Golonka, A. Dziedzic, W. Smetana, H. Homolka, R. Reicher:
    "Benchmarking Different Substrates for Thick-film Sensors of Mechanical Quantities";
    Vortrag: European Microelectronics and Packaging Conference and Exhibition, Brugge, Belgium; 12.06.2005 - 15.06.2005; in: "Proceedings of the 15th EMPC", (2005), S. 216 - 221.
  1028. D. Belavic, M. Hrovat, A. Bencan, W. Smetana, H. Homolka, R. Reicher, L. Golonka, A. Dziedzic, J. Kita:
    "Investigations of Thick-film Resistors on Different Substrates for Strain-gouge Applications";
    Vortrag: International Symposium on Microelectronics (IMPAS 2002), Denver, CO, USA; 04.09.2002 - 06.09.2002; in: "Proceedings IMAPS 2002", (2002), ISBN: 0-930815-66-1; S. 441 - 446.
  1029. D. Belavic, M. Hrovat, A. Bencan, J. Cilensek, W. Smetana, H. Homolka, R. Reicher, L. Golonka, A. Dziedzic:
    "Thick-Film Resistors as Sensing Elements on Various Substrates";
    Vortrag: 38th International Conference on Microelectronics, Devices and Materials (MIDEM 2002), Lipica, Slovenia; 09.10.2002 - 11.10.2002; in: "Proceedings MIDEM 2002", (2002), S. 309 - 314.
  1030. R. Beigelbeck, M. Stifter, M. Schneider, F. Keplinger, U. Schmid, T. Voglhuber-Brunnmaier, B. Jakoby:
    "Rigorous Analytical Analysis of Resonant Euler-Bernoulli Beams with Constant Thickness and Polynomial Width";
    Vortrag: IEEE Ultrasonics Symposium, Illinois, USA; 03.09.2014 - 06.09.2014; in: "2014 IEEE Ultrasonics Symposium Proceedings", IEEE, (2014), S. 2095 - 2099.

    Zusätzliche Informationen
  1031. R. Beigelbeck, M. Schneider, M. Stifter, T. Voglhuber-Brunnmaier, B. Jakoby, U. Schmid, F. Keplinger:
    "Novel exact closed-form solutions for the resonant frequencies and mode-shapes of Euler-Bernoulli beams with constant thickness and polynomial width";
    Vortrag: 64. Jahrestagung der Österreichischen Physikalischen Gesellschaft, Pöllau; 24.09.2014 - 27.09.2014; in: "Tagungsband - 64. Jahrestagung der ÖPG", (2014).
  1032. N. Bednar, N. Severino, I. Atassi, G. Miskovic, N. Adamovic:
    "Development and Characterization of Customizable Interconnection for CIGS Solar Cells";
    Poster: 11th International Conference on Nanosciences & Nanotechnologies (NN14), Thessaloniki, Greece; 08.07.2014 - 11.07.2014; in: "Proceedings", (2014), S. 1.

    Zusätzliche Informationen
  1033. N. Bednar, N. Severino, N. Adamovic:
    "Light Management in Back-Textured Thin-Film Solar Cells Achieved by Hot Embossing Process";
    Poster: 12th International Conference on Nanosciences & Nanotechnologies - NN15, Thessaloniki, Greece; 07.07.2015 - 10.07.2015; in: "Book of Abstracts", (2015), S. 60.
  1034. N. Bednar, N. Severino, N. Adamovic:
    "Light Trapping by Texturing of Isolation Layer in CIGS Solar Cells";
    Poster: 11th International Conference on Nanosciences & Nanotechnologies (NN14), Thessaloniki, Greece; 08.07.2014 - 11.07.2014; in: "Book of Abstracts", (2014), S. 183.
  1035. N. Bednar, N. Severino, N. Adamovic:
    "LIGHT TRAPPING IN THIN CU(IN,GA)SEz SOLAR CELLS ON TEXTURED POLYIMIDE SUBSTRATE";
    Vortrag: 31st European Photovoltaic Solar Energy Conference and Exhibition - EU PVSEC, Hamburg, Deutschland; 14.09.2015 - 18.09.2015; in: "31st European Photovoltaic Solar Energy Conference and Exhibition - EU PVSEC", (2015), S. 1061 - 1064.

    Zusätzliche Informationen
  1036. N. Bednar, N. Severino, N. Adamovic:
    "Modelling and Simulation of Curved CIGS Modules";
    Poster: 29th European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC), Amsterdam, NL; 22.09.2014 - 26.09.2014; in: "29th European PV Solar Energy Conference - EU PVSEC", (2014), S. 1809 - 1811.

    Zusätzliche Informationen
  1037. N. Bednar, N. Severino, N. Adamovic:
    "Simulation of Light Trapping in CIGS Thin-film Solar Cells using Finite Element Method";
    Vortrag: 2nd Spring International School and Workshop - NEXTGEN NANO PV 2015, Mao, Menorca, Spain; 20.04.2015 - 24.04.2015; in: "Abstracts - NEXTGEN NANO PV 2015", (2015), S. 1 - 2.
  1038. N. Bednar, J. Matovic, I. Atassi, U. Schmid, G. Stojanovic:
    "A Metallic Nanoparticles Generation Method for Conductive Inks";
    Poster: Ee 2011, Novi Sad, Serbia; 26.10.2011 - 28.10.2011; in: "Proceedings of the 16th International Symposium on Power Electronics", (2011), 5 S.
  1039. J. Bardong, A. Binder, S. Toskov, G. Miskovic, G. Radosavljevic:
    "First Investigation of LTCC package for high temperature SAW sensors";
    Vortrag: AMA Conferences 2015 - SENSOR 2015 and IRS2 2015, Nürnberg, Germany; 19.05.2015 - 21.05.2015; in: "Proceedings SENSOR 2015", (2015), ISBN: 978-3-9813484-8-4; S. 280 - 285.
  1040. T. Bán, J. Takács, L. Tóth, F. Franek, A. Pauschitz:
    "Investigation of Tribological Properties of Al203 Based Plasma Coatings";
    Vortrag: VI. Tibological Conference, Budapest; 06.07.1996 - 07.07.1996; in: "Proceedings", Budapest (1996), S. 138 - 143.
  1041. B. Balluch, W. Smetana, G. Stangl:
    "Fine Structured Channel Arrays and Bridging Elements for LTCC-Technology Applications";
    Poster: International Conference of IMAPS Poland Chapter, Pultusk, Poland; 21.09.2008 - 24.09.2008; in: "Abstracts Proceedings of the XXXII International Conference of IMAPS Poland Chapter", (2008), ISBN: 978-83-917701-6-0; 1 S.
  1042. B. Balluch, W. Smetana, W. Fleischer:
    "A Modified Wetting Balance Set-Up for the Evaluation of Lead-Free Solder / Flux / Metallization Systems";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Wr. Neustadt, Austria; 19.05.2005 - 22.05.2005; in: "Proceedings of 28th ISSE 2005", (2005), ISBN: 0-7803-9324-4; S. 134 - 139.
  1043. B. Balluch, W. Smetana, W. Fleischer:
    "Evaluation of Lead-free Solder / Flux / Metallization Systems by Means of Modified Wettability Tests";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Wr. Neustadt, Austria; 19.05.2005 - 22.05.2005; in: "Book of Abstracts", (2005), ISBN: 3-85133-036-6; S. 102 - 103.
  1044. B. Balluch, S. Lüftl, S. Seidler, W. Smetana:
    "Binder Burnout Studies of LTCC Tapes by Means of Thermal Analyses";
    Poster: International Conference of IMAPS Poland Chapter, Pultusk, Poland; 21.09.2008 - 24.09.2008; in: "Abstracts Proceedings of the XXXII International Conference of IMAPS Poland Chapter", (2008), ISBN: 978-83-917701-6-0; 1 S.
  1045. B. Balluch, E. Gaubitzer, M. Knapp, G. Köhler:
    "Progress and Outlook Regarding the Realization of the "OnkoCELL-C"-Mobile Diagnostic System";
    Vortrag: Eureka E!4570 IPCTECH New Generation of 3-D Integrated Passive Components & Microsystems in LTCC-Technology Meeting, Krakow, Poland; 28.03.2012 - 29.03.2012; in: "Proceedings", (2012), S. 7.
  1046. B. Balluch, I. Atassi, M. Weilguni, G. Radosavljevic, A. Myrtezani:
    "Realisation of Hermetically Tight Joints for Microfluidic Applications in LTCC - Technology";
    Poster: IMAPS/ACerS 8th International CICMT Conference and Exhibition (2012), Erfurt, D; 16.04.2012 - 19.04.2012; in: "Proc. of 8th Conf. and Exhibition on Ceramic Interconnect and Ceramic Microsystems Technology (CICMT)", (2012), S. 423 - 427.
  1047. A. Balck, M. Leester-Schaedel, Ch. Kirsch, U. Schmid, H. Seidel, S. Büttgenbach:
    "Novel Energy-Saving Microvalve For Medical Applications";
    Poster: 6th international Conference on Microtechnologies in Medicine and Biology, Lucerne, CH; 04.05.2011 - 06.05.2011; in: "6th international Conference on Microtechnologies in Medicine and Biology", (2011), ISBN: 978-0-9743611-6-1; S. 283 - 284.

    Zusätzliche Informationen
  1048. D. Bajalan, H. Hauser, P. Haumer, P.L. Fulmek:
    "Hysteresis Calculation for Thin Film Multi-Layers Nanostructured by Ion Irradiation";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Wr. Neustadt, Austria; 19.05.2005 - 22.05.2005; in: "Book of Abstract", (2005), ISBN: 3-85133-036-6; S. 104 - 105.
  1049. D. Bajalan, H. Hauser, P.L. Fulmek:
    "Calculations of magnetic Nanostructure Hysteresis Loops for Modified Thin by Ion Irradiation";
    Vortrag: Progress in Electromagnetics Research Symposium (PIERS), Pisa, Italy; 28.03.2004 - 31.03.2004; in: "Proceedings PIERS 2004", University Press, (2004), ISBN: 88-8492-268-2; S. 465 - 468.
  1050. D. Bajalan, H. Hauser, P.L. Fulmek:
    "Energetic Model Interpretation of Thermal Stability of Nano-Magnetic Structures Prepared by Ion Irradiation";
    Vortrag: 12th International Symposium on Interdisciplinary Electromagnetic, Mechanic & Biomedical Problems, Bad Gastein, Austria; 12.09.2005 - 14.09.2005; in: "Short Paper Proceedings ISEM 2005", (2005), ISBN: 3-902105-00-1; S. 64 - 65.
  1051. D. Bajalan, H. Hauser, P.L. Fulmek:
    "Hysteresis Loop Calculation for Magnetic Nanostructures in Multilayer Thin Films Modified By Ion Irradiation";
    Poster: Joint European Magnetic Symposia JEMS, Dresden, D; 05.09.2004 - 10.09.2004; in: "Proceedings JEMS 04", (2004), S. 213.
  1052. D. Bajalan, H. Hauser, P.L. Fulmek:
    "Ion Irradiation Effect on The Hysteresis Loop In Thin Films";
    Poster: 4th International Symposium on Hysteresis and Micromagnetic Modeling, Salamanca, Spain; 28.05.2003 - 30.05.2003; in: "Abstracts Booklet HMM 2003", (2003), S. 78.
  1053. D. Bajalan, H. Hauser, P.L. Fulmek:
    "Magnetic Nanostructure Hysteresis Calculation for Thin Film Multi-Layers Modified by Ion Irradiation";
    Poster: Joint European Magnetic Symposia, Dresden, Germany; 05.09.2004 - 10.09.2004; in: "Proceedings of the Joint European Magnetic Symposia", (2004).
  1054. D. Bajalan, H. Hauser, P.L. Fulmek:
    "Nano-Magnetic Characteristics in Thin Films";
    Vortrag: 5th International Symposium on Hysteresis Modeling and Micromagnetics (HMM 2005), Budapest, Hungary; 30.05.2005 - 01.06.2005; in: "Book of Abstracts", (2005), ISBN: 963-420834-7; S. 26 - 27.
  1055. A.R. Baghai-Wadji, G. G. Walter:
    "Green's Function-Based Wavelets";
    Vortrag: IEEE SU, San Juan, Puerto Rico (eingeladen); 22.10.2000 - 25.10.2000; in: "Proceedings of the IEEE SU", (2000), S. 537 - 541.
  1056. A.R. Baghai-Wadji, G. G. Walter:
    "Green's Function-Based Wavelets: Selected Properties";
    Vortrag: IEEE Ultrasonics Symposium, San Juan, Puerto Rico; 22.10.2000 - 25.10.2000; in: "Proceedings of the IEEE Ultrasonics Symposium", (2000), S. 199 - 203.
  1057. A.R. Baghai-Wadji, K. Varis:
    "Pseudo-spectral Analysis of Diagonalized Maxwell's Equations: Theory and Applications to 2D- and 3D Photonic Crystal Models ";
    Vortrag: Progress in Electromagnetics Research Symposium (PIERS), Singapore; 07.01.2003 - 10.01.2003; in: "Proceedings PIERS", PIERS, (2003).
  1058. A.R. Baghai-Wadji, S. Selberherr, F. Seifert:
    "A Green's Function Approach to the Electrostatic Problem of Single, Coupled and Comb-like Metallic Structures in Anisotropic Multilayered Media";
    Vortrag: International Conference on Modelling and Simulation, Athen; 29.09.1986 - 01.10.1986; in: "Abstracts of the International Conference on Modelling and Simulation", 2 (1986), S. 39.
  1059. A.R. Baghai-Wadji, S. Selberherr, F. Seifert:
    "A Green's Function Approach to the Electrostatic Problem of Single, Coupled and Comb-like Metallic Structures in Anisotropic Multilayered Media";
    Vortrag: International Conference on Modelling and Simulation, Athen; 29.09.1986 - 01.10.1986; in: "Proceedings of the International Conference on Modelling and Simulation", 2.1 (1986), S. 109 - 120.
  1060. A.R. Baghai-Wadji, S. Selberherr, F. Seifert:
    "Closed-Form Electrostatic Field Analysis of Metallic Comb-like Structures Containing Isolated and Interconnected Floating Strips of Arbitrary Topological Complexity. Part I: One-Dimensional Representation";
    Vortrag: International Symposium on Numerical Field Calculation in Electrical Engineering (IGTE), Graz; 22.09.1986 - 23.09.1986; in: "Proceedings of the International Symposium on Numerical Field Calculation in Electrical Engineering", (1986), S. 138 - 145.
  1061. A.R. Baghai-Wadji, S. Selberherr, F. Seifert:
    "Closed-Form Electrostatic Field Analysis of Metallic Comb-like Structures Containing Isolated and Interconnected Floating Strips of Arbitrary Topological Complexity. Part II: Two-Dimensional Representation";
    Vortrag: International Symposium on Numerical Field Calculation in Electrical Engineering (IGTE), Graz; 22.09.1986 - 23.09.1986; in: "Proceedings of the International Symposium on Numerical Field Calculation in Electrical Engineering", (1986), S. 146 - 153.
  1062. A.R. Baghai-Wadji, S. Selberherr, F. Seifert:
    "Closed-Form Formulae Electrostatic Field Analysis of Metallic Comb-like Structures Containing Isolated and Interconnected Floating Strips of Arbitrary Topological Complexity. Part II: Two-Dimensional Representation";
    Vortrag: International Symposium on Numerical Field Calculation in Electrical Engineering (IGTE), Graz; 22.09.1986 - 23.09.1986; in: "Abstracts of the International Symposium on Numerical Field Calculation in Electrical Engineering", (1986), S. 23 - 24.
  1063. A.R. Baghai-Wadji, O. Männer, S. Selberherr, F. Seifert:
    "Analysis and Measurement of Transducer End Radiation in SAW Filters on Strongly Coupling Substrates";
    Vortrag: Forum Europeen Temps-Frequence, Besancon; 18.03.1987 - 20.03.1987; in: "Proceedings of the 1er Forum Europeen Temps-Frequence", (1987), S. 315 - 319.
  1064. A.R. Baghai-Wadji, R. Kolm:
    "On the Construction and Efficient Implementation of Compactly Supported Wavelets for the Discretization of Fredholm Integral Equations";
    Vortrag: Progress in Electromagnetics Research Symposium (PIERS), Singapore; 07.01.2003 - 10.01.2003; in: "Proceedings PIERS", PIERS, (2003).
  1065. A.R. Baghai-Wadji:
    "A Symbolic Procedure for the Diagonalization of Linear PDEs in Accelerated Computational Engineering";
    Vortrag: Symbolic and Numeric Computation, Linz, Austria; 12.09.2001 - 14.09.2001; in: "Proceedings of Symbolic and Numeric Computation (SNSC '01)", (2001), S. 1.
  1066. A.R. Baghai-Wadji:
    "Diagonalization, Fast-MoM, and Green's Function-based Wavelets for Accuracy-enhanced and Accelerated EM Computing in complex Media";
    Vortrag: Progress in Electromagnetics Research Symposium (PIERS), Osaka, Japan (eingeladen); 18.07.2001 - 22.07.2001; in: "Proceedings of PIERS 2001", (2001), S. 700.
  1067. A.R. Baghai-Wadji:
    "Fast-MoM: An Introduction and Applications in Computational Electromagnetics";
    Vortrag: 10th Finnish Electromagnetics Meeting, Nokia Research Center, Helsinki, Finland (eingeladen); 05.09.2000; in: "Proceedings of the Electromagnetics 2000", (2000), S. 38 - 39.
  1068. A.R. Baghai-Wadji:
    "Manifolds, Tangent Spaces and Universal Functions in Accelerated EM Computing: Advances in the Fast-MoM Approach";
    Vortrag: Progress in Electromagnetics Research Symposium (PIERS), Singapore; 07.01.2003 - 10.01.2003; in: "Proceedings PIERS", PIERS, (2003).
  1069. A.R. Baghai-Wadji:
    "Material, Geometry, and Frequency Independent Bivariate Universal Functions for the Analysis of Mechanical and Electrical Loading Effects in Acoustic Devices: A Fast-MoM Approach";
    Vortrag: IEEE Ultrasonics Symposium, Lake Tahoe, Nevada; 22.10.2000 - 25.10.2000; in: "Proceedings", (2000), S. 87 - 92.
  1070. A.R. Baghai-Wadji:
    "Third-order Effects in SAW and BAW Device Modeling";
    Vortrag: IEEE SU, San Juan, Puerto Rico; 22.10.2000 - 25.10.2000; in: "Proceedings of the IEEE SU", (2000), S. 143 - 148.
  1071. A.R. Baghai-Wadji:
    "Universal Functions in Computational Electromagnetics";
    Vortrag: Applied Computational Electromagnetics Society, Monterey; 24.03.2003 - 28.03.2003; in: "Proceedings ACES", Applied Computational Electromagnetics Society Journal, (2003), ISSN: 1054-4887; S. 320 - 327.
  1072. E. Badisch, R. Polak, M. Kirchgaßner, F. Franek:
    "Multiphase materials: Influence of microstructure and interface properties on wear behaviour";
    Vortrag: ECOTRIB 2007, Ljubljana, Slovenia; 12.06.2007 - 15.06.2007; in: "ECOTRIB '07", Slovenian Society for Tribology, Volume I (2007), ISBN: 978-961-90254-8-2; S. 585 - 596.

    Zusätzliche Informationen
  1073. A. Backes, P Walkoun, F. Patocka, U. Schmid:
    "Generation Of A Porous Device Layer On Soi Substrates";
    Vortrag: Transducers 2013, Barcelona, Spain; 16.06.2013 - 20.06.2013; in: "Transducers 2013 - Proceedings", IEEE, (2013), ISBN: 978-1-4673-5983-2; S. 1048 - 1050.

    Zusätzliche Informationen
  1074. A. Backes, F. Patocka, P Walkoun, U. Schmid:
    "Poröses Silizium auf SOI Substraten";
    Poster: Mikrosystemtechnik Kongress 2013, Aachen, D; 14.10.2013 - 16.10.2013; in: "Proceedings MikroSystemTechnik Kongress 2013", VDE VERLAG GMBH, Berlin und Offenbach, Bismarckstraße 33, 10625 Berlin, (2013), ISBN: 978-3-8007-3555-6; S. 630 - 633.

    Zusätzliche Informationen
  1075. A. Backes, N. Adamovic, U. Schmid:
    "New Light Management Concepts for standard Si solar cells fabricated by Embossing of Polycarbonate Front & Back sheets";
    Poster: Eu Pvsec 2013, Paris, F; 30.09.2013 - 04.10.2013; in: "EU PVSEC 2013 - Conference Procedings", (2013), S. 3096 - 3098.

    Zusätzliche Informationen
  1076. A. Backes, N. Adamovic, G. Meinhardt, U. Schmid:
    "Advanced concepts of the improved light management for solar cells and modules";
    Poster: 26th European Photovoltaic Solar Energy Conference and Exhibition, Hamburg, D; 05.09.2011 - 09.09.2011; in: "EU PVSEC Proceedings", WIP Wirtschaft und Infrastruktur GmbH & Co, (2011), ISBN: 3-936338-27-2; 5 S.

    Zusätzliche Informationen
  1077. A. Backes, N. Adamovic, G. Meinhardt, U. Schmid:
    "Optische Mikrostrukturen in Photovoltaik Modulen";
    Vortrag: Mikrosystemtechnik Kongress 2011, Darmstadt; 10.10.2011 - 12.10.2011; in: "Mikrosystemtechnik Kongress 2011 - Proceedings", VDE VERLAG GMBH, Berlin und Offenbach, Bismarckstraße 33, 10625 Berlin, (2011), ISBN: 978-3-8007-3367-5; Paper-Nr. 25, 4 S.

    Zusätzliche Informationen
  1078. B. Augustyniak, M. Radczuk, M. Chmielewski, H. Hauser:
    "Imaging of Grains and Internal Stress in Go Fe-Si Alloy with Barkhausen Effects";
    Poster: 16th Electromagnetic Field and Materials, Bratislava, Slovakia; 11.09.2002 - 13.09.2002; in: "The Book of Abstracts", (2002), S. 84.
  1079. B. Augustyniak, L. Piotrowsky, M. Chmielewski, M. Radczuk, H. Hauser:
    "Investigation of Magnetic and Magnetomechanical Hysteresis Properties of Fe-Si Alloys with Classical and Mechanical Barkhausen Effects and Magnetoacoustic Emission";
    Poster: 47th Annual Conference on Magnetism & Magnetic Materials, Tampa, Florida, USA; 11.11.2002 - 15.11.2002; in: "Abstracts MMM 02", (2002), S. 207.
  1080. C. Atzlesberger, W. Smetana:
    "Evaluation of a Centrifugal Micropump realized in LTCC-Technology";
    Vortrag: International Spring Seminar on Electronics Technology (ISSE), Cluj-Napoca, Romania; 09.05.2007 - 13.05.2007; in: "Proceedings of 30th ISSE 2007", (2007), ISBN: 1-4244-1218-8; S. 243 - 247.
  1081. C. Atzlesberger, W. Smetana:
    "Integrated magnetic micropump in LTCC technology";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Cluj-Napoca, Romania; 09.05.2007 - 13.05.2007; in: "Abstracts Proceedings", (2007), ISBN: 978-973-713-174-4; S. 124 - 125.
  1082. I. Atassi, W. Smetana, E. Gaubitzer, M. Edetsberger, G. Köhler, J. Nicolics:
    "Performance Optimization of a Reactor Module by Means of 3-Dimensional Finite Element-Analyses";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Budapest, Hungary; 07.05.2008 - 11.05.2008; in: "Abstract Proceedings - Reliability and Life-time Prediction", (2008), ISBN: 978-963-06-4915-5; S. 304 - 305.
  1083. I. Atassi, W. Smetana, E. Gaubitzer, M. Edetsberger, G. Köhler:
    "Analyses of flow characteristi of liquids in a microreactor cell";
    Vortrag: International Spring Seminar on Electronics Technology (ISSE), Cluj-Napoca, Romania; 09.05.2007 - 13.05.2007; in: "Abstracts Proceedings", (2007), ISBN: 978-973-713-174-4; S. 106 - 111.
  1084. I. Atassi, W. Smetana, E. Gaubitzer, M. Edetsberger, G. Köhler:
    "Evaluation of Flow Characteristics of Fluids in a Microperfusion Cell by Means of Finite Element Analyses";
    Vortrag: International Spring Seminar on Electronics Technology (ISSE), ), Cluj-Napoca, Romania; 09.05.2007 - 13.05.2007; in: "Proceedings of 30th ISSE 2007", (2007), ISBN: 1-4244-1218-8; S. 106 - 111.
  1085. I. Atassi, W. Smetana, M. Edetsberger, G. Köhler:
    "Design and Characterization of a Perfusion Module fabricated in LTCC Technology for Monitoring Biological Cells";
    Poster: International Conference of IMAPS Poland Chapter, Pultusk, Poland; 21.09.2008 - 24.09.2008; in: "Abstracts Proceedings of the XXXII International Conference of IMAPS Poland Chapter", (2008), ISBN: 978-83-917701-6-0; 1 S.
  1086. I. Atassi, A. Maric, N. Blaz, G. Radosavljevic, L. Zivanov, W. Smetana:
    "Ferrite LTCC Complex Permeability Dependence on Processing Parameters and Environment Temperature";
    Poster: 35th International Conference of IMAPS - CPMT IEEE Poland, Gdansk-Sobieszewo, Poland; 21.09.2011 - 24.09.2011; in: "Conference Proceedings", (2011), ISBN: 978-83-932464-0-3; S. 207 - 210.
  1087. I. Atassi, E. Gaubitzer, G. Köhler, M. Edetsberger, W. Smetana, J. Nicolics:
    "Characterization of a Reactor Module by Means of 3 - Dimensional Finite Element - Analyses";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Budapest, Hungary; 07.05.2008 - 11.05.2008; in: "ISSE 2008 Conference Proceedings", (2008), ISBN: 978-963-06-4915-5; S. 658 - 663.
  1088. I. Atassi, E. Bauer, J. Nicolics:
    "Review of Current Thermoelectric Materials and an Evaluation of a Cascading Approach";
    Poster: 35th International Spring Seminar on Electronics Technology (ISSE 2012), Bad Aussee; 09.05.2012 - 13.05.2012; in: "Book of Abstracts", (2012), ISBN: 978-3-85465-015-7; S. 34 - 35.
  1089. I. Atassi, B. Balluch, C. Kluge, G. Radosavljevic:
    "Compressive Strength lnvestigations of LTCC";
    Vortrag: Eureka E!4570 IPCTECH New Generation of 3-D Integrated Passive Components & Microsystems in LTCC-Technology Meeting, Krakow, Poland; 28.03.2012 - 29.03.2012; in: "Proceedings", K. Zaraska, M. Machnik, B. Synkiewicz (Hrg.); (2012), S. 4.
  1090. G. Artner, P. K. Gentner, J. Nicolics, C. Mecklenbräuker:
    "Material Characterisation of Carbon-Fiber Compounds with the NRW Method";
    Vortrag: COST IC1004 13th MC & Scientific Meeting, Valencia; 05.05.2015 - 07.05.2015; in: "Cost IC1004: 12th MC & Scientific Meeting", (2015), S. 1 - 6.

    Zusätzliche Informationen
  1091. Y. Ansel, F. Michael, M. Nienhaus, G. Popovic et al.:
    "Development of Tools for Handling and Assembling of Microcomponents";
    Vortrag: 12th Micromechanics Europe Worshop, Cork, Ireland; 16.09.2001 - 18.09.2001; in: "Proceedings of 12th Micromechanics Europe Workshop", M. Hill (Hrg.); (2001), S. 195 - 198.

    Zusätzliche Informationen
  1092. D. Andrijasevic, W. Smetana, S. Zoppel, W. Brenner:
    "An investigation on development of MEMS in LTCC by embossing technique";
    Poster: 4M 2007 - Third International conference on multi-material micro manufacture, Borovets, Bulgaria; 03.10.2007 - 05.10.2007; in: "4M 2007 - Third international Conference on multi-material micro manufacture - Proceedings", (2007), ISBN: 978-1904445-53-1; S. 143 - 146.

    Zusätzliche Informationen
  1093. D. Andrijasevic, W. Smetana, M. Unger, S. Zoppel, W. Brenner:
    "Precise embossing system for micro-replication of LTCC structures";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Cluj-Napoca, Romania; 09.05.2007 - 13.05.2007; in: "Abstracts Proceedings", (2007), ISBN: 978-973-713-174-4; S. 166 - 167.

    Zusätzliche Informationen
  1094. D. Andrijasevic, W. Smetana, D. Esinenco, W. Brenner:
    "Low temperature adhesive bonding in MEMS";
    Vortrag: 4M 2006 - Second international Conference on multi-material micro manufacture - Proceedings, Grenoble, France; 20.09.2006 - 22.09.2006; in: "4M 2006 - Second international Conference on multi-material micro manufacture - Proceedings", Elsevier, (2006), ISBN: 0-080-45263-9; S. 87 - 90.

    Zusätzliche Informationen
  1095. D. Andrijasevic, I. Giouroudi, W. Smetana, H. Homolka, S. Boehm, W. Brenner:
    "New Approach to Micro-joing by Hot Gas Stream";
    Poster: MNE2005 - 31st International Conference on Micro- and Nano-Engineering 2005, Wien; 19.09.2005 - 22.09.2005; in: "MNE2005 - 31st International Conference on Micro- and Nano-Engineering 2005 - Abstracts", (2005).
  1096. D. Andrijasevic, I. Giouroudi, W. Smetana, W. Brenner, K. Malecki:
    "Multilayer Adhesive Bonding under Hot Air Stream";
    Vortrag: IMAPS International Conference and Exhibition on Device Packaging - IMAPS 2006, Scottsdale, Arizona, USA; 20.03.2006 - 23.03.2006; in: "IMAPS International Conference and Exhibition on Device Packaging - Extended Abstracts & Final Program", IMAPS, (2006).

    Zusätzliche Informationen
  1097. D. Andrijasevic, I. Giouroudi, W. Smetana, W. Brenner, D. Esinenco:
    "Thermal Characterization of the Micro Bonding Process Using a Hot Air Stream";
    Vortrag: 25th International Conference on Microelectronics - MIEL 2006, Belgrade, Serbia and Montenetgro; 14.05.2006 - 17.05.2006; in: "25th International Conference on Microelectronics - Proceedings", IEEE, Volume 1 (2006), ISBN: 1-4244-0116-x; S. 267 - 270.

    Zusätzliche Informationen
  1098. D. Andrijasevic, I. Giouroudi, W. Smetana, W. Brenner:
    "Low Temperature Non-Viscous Adhesive Bonding in MEMS";
    Vortrag: ISSE 2006 - 29th International Spring Seminar on Electronics Technology, St. Marienthal, Germany; 10.05.2006 - 14.05.2006; in: "ISSE 2006 - Nano Technologies for Electronics Packaging", Verlag Dr. Markus A. Detert, (2006), ISBN: 3-934142-23-0; S. 24 - 25.

    Zusätzliche Informationen
  1099. D. Andrijasevic, I. Giouroudi, W. Smetana, S. Boehm, W. Brenner:
    "Hot Gas Stream Application in Micro-bonding Technique";
    Vortrag: Photonics West 2006, San Jose, California, USA; 21.01.2006 - 26.01.2006; in: "Proceedings of SPIE on CD-ROM: Photonics West 2006: MOEMS, MEMS, Micro and Nanofabrication", SPIE, Volumes 6109-6114 (2006), 8 S.

    Zusätzliche Informationen
  1100. D. Andrijasevic, W. Brenner, J. Nicolics:
    "Multilayer Adhesive Bonding Under Hot Air Stream";
    Poster: Junior Scientist Conference 2006, Wien, Austria; 19.04.2006 - 21.04.2006; in: "Junior Scientist Conference 2006 - Proceedings", (2006), ISBN: 3-902463-05-8; S. 89 - 90.

    Zusätzliche Informationen
  1101. P. Andrei, L. Stoleriu, H. Hauser:
    "Methods of Hysteresis Model Identification";
    Poster: 44th Annual Conference on Magnetism & Magnetic Materials (MMM 99), San Jose, USA; 15.11.1999 - 18.11.1999; in: "MMM 99-Abstracts", (1999), S. 308.
  1102. A. Almansa, C. Woegerer, G. Kronreif, W. Brenner:
    "Innovative Multipurpose Station for Manipulation, Assembly and Characterization at the Micro Range Using AI Control Techniques";
    Vortrag: International Advanced Robotics Programme, Moskau - Russland; 24.04.2003 - 25.04.2003; in: "Microrobots, Micromaschines and Microsystem", (2003), S. 239 - 246.
  1103. A. Almansa, C. Wögerer, W. Brenner, G. Kiriakidis:
    "From Mechatronics to Microsystems Technology: European Scale Training in Microhandling and -assembly";
    Vortrag: IEEE International Conference on Mechatronics ICM'2004, Instanbul, Turkey; 03.06.2004 - 05.06.2004; in: "Proceeding of IEEE International Conference on Mechatronics ICM'2004", (2004), ISBN: 0-7803-8600-0; S. 1 - 5.
  1104. A. Almansa, D Fratila, S. Bou, W. Brenner:
    "ASSEMIC: A European Project for Advance Microhandling and Assembly";
    Vortrag: 12th IASTED Conference on Robotics and Applications, Honolulu, Hawai, USA; 14.08.2006 - 16.08.2006; in: "Proceedings of the 12th IASTED International Conference ROBOTICS AND APPLICATIONS", IASTED, (2006), ISBN: 0-88986-597-3; S. 79 - 83.

    Zusätzliche Informationen
  1105. A. Almansa, E. Chatzitheodoridis, D. Petrovic, G. Popovic, O. Del Medico, H. Detter:
    "Semiautonomous station for handling and assembly of Microsystems supported by image processing";
    Vortrag: 5th Franco-Japanese Congress & 3rd European-Asian Congress of Mechatronics, Besancon (eingeladen); 09.10.2001 - 11.10.2001; in: "Proceedings of the Franco-Japanese Congress of Mechatronics", Besancon (2001), S. 355 - 359.

    Zusätzliche Informationen
  1106. A. Almansa, W. Brenner, S. Bou, A. Locher:
    "ASSEMIC: A European Research and Training Network for Advanced Post-graduate Education";
    Vortrag: 2004 IEEE International Conference on Industrial Technology, Hammamet; Tunisia; 08.12.2004 - 10.12.2004; in: "Proceeding of IEEE International Conference on Industrial Technology", IEEE Catalog Number: 04TH8771C (2004), ISBN: 0-7803-8663-9; S. 1 - 6.
  1107. A. Almansa, S. Bou, Z. Rozynek, W. Brenner:
    "ASSEMIC: Research advances in microhandling and -assembly - Special ASSEMIC Ssession";
    Vortrag: 4M 2007 - Third International conference on multi-material micro manufacture, Borovets, Bulgaria (eingeladen); 03.10.2007 - 05.10.2007; in: "4M 2007 - Third international Conference on multi-material micro manufacture - Proceedings", (2007), ISBN: 978-1904445-53-1; S. 47 - 50.

    Zusätzliche Informationen
  1108. L. Alff:
    "Spintronics: A New Spin for the World of Electronics";
    Vortrag: GMe Forum 2005, Vienna, Austria (eingeladen); 17.03.2005 - 18.03.2005; in: "Proceedings of the Seminar GMe Forum 2005", K. Riedling (Hrg.); (2005), ISBN: 3-901578-15-3; 1 S.
  1109. A. Alamin Dow, U. Schmid, N. Kherani:
    "Advanced Modelling of AlN-based Micromachined Energy Harvesters Driven by -Emitting Radioisotopes";
    Vortrag: SPIE Microtechnologies 2013, Grenoble, France; 24.04.2013 - 26.04.2013; in: "Proceedings of SPIE", 8763 (2013), ISSN: 0277-786x.

    Zusätzliche Informationen
  1110. A. Alamin Dow, H. Lin, C. Popov, U. Schmid, N. Kherani:
    "High Frequency SAW Nanotransducer Utilizing an Ultrananocrystalline Diamond/ AlN Bimorph Architecture";
    Vortrag: 2013 IEEE 5th International Nanoelectronics Conference (INEC), Resorts World Sentosa, Singapore; 02.01.2013 - 04.01.2013; in: "Proceedings of the 2013 IEEE 5th International Nanoelectronics Conference (INEC)", IEEE, CFP13625-USB (2013), ISBN: 978-1-4673-4841-6; S. 360 - 363.

    Zusätzliche Informationen
  1111. A. Alamin Dow, H. Lin, C. Popov, U. Schmid, N. Kherani:
    "On controlling EBL parameters for nanoelectromechanical resonators fabricated on insulating/semiconducting structures";
    Vortrag: 2013 IEEE 5th International Nanoelectronics Conference (INEC), Resorts World Sentosa, Singapore; 02.01.2013 - 04.01.2013; in: "Proceedings of the 2013 IEEE 5th International Nanoelectronics Conference (INEC)", IEEE, CFP13625-USB (2013), ISBN: 978-1-4673-4841-6; S. 318 - 321.

    Zusätzliche Informationen
  1112. A. Alamin Dow, N. Kherani, C. Popov, A. Ahmed, U. Schmid:
    "Nanocrystalline Diomond/AlN Structures for High Efficient SAW Nano-Resonators";
    Vortrag: International Symposium on Applications of Ferroelectrics (ISAF) - 2012, Aveiro, P; 09.07.2012 - 13.07.2012; in: "International Symposium on Applications of Ferroelectrics (ISAF) - 2012", IEEE, IEEE Xplore (2012), ISBN: 978-1-4673-2669-8.

    Zusätzliche Informationen
  1113. A. Alamin Dow, A. Bittner, U. Schmid, N. Kherani:
    "Design, Fabrication and Characterization of a Micromachined Piezoelectric Energy Harvester Excited by Ambient Vibrations";
    Vortrag: SPIE Microtechnologies 2013, Grenoble, France; 24.04.2013 - 26.04.2013; in: "Proceedings of SPIE", 8763 (2013), ISSN: 0277-786x.

    Zusätzliche Informationen
  1114. A. Alamin Dow, H. Al-Rubaye, U. Schmid, N. Kherani:
    "Analysis and Modeling of a Bimorph AlN Piezoelectric Autonomous Microgenerator Stimulated by ß-emitting Radioisotopes";
    Vortrag: 20th IEEE International Symposium on Applications of Ferroelectrics / International Symposium on Piezoresponse Force Microscopy & Nanoscale Phenomena in Polar Materials, Vancouver, Canada; 24.07.2011 - 27.07.2011; in: "Applications of Ferroelectrics (ISAF/PFM), 2011 International Symposium on and 2011 International Symposium on Piezoresponse Force Microscopy and Nanoscale Phenomena in Polar Materials", IEEE Xplore, (2011), S. 1 - 4.

    Zusätzliche Informationen
  1115. A. Alamin Dow, H. Al-Rubaye, U. Schmid, N. Kherani:
    "Modelling and Analysis of a MEMS Piezoelectric Energy Harvester Based on Random Vibrations";
    Vortrag: Smart Systems Integration 2011 (SSI), Dresden, D; 22.03.2011 - 23.03.2011; in: "Smart Systems Integration 2011 (SSI) - 5th European Conference & Exhibition on Integration Issues of Miniaturized Systems - MEMS, MOEMS, ICs and Electronic Components", VDE Verlag Gmbh, Berlin (2011), ISBN: 978-3-8007-3324-8; S. 1 - 5.
  1116. A. Alamin Dow, A. Ahmed, A. Bittner, C. Popov, U. Schmid, N. Kherani:
    "SAW Nano-Transducer Utilizing Ultra-Nanocrystalline Diamond/AlN Bi-Layer";
    Vortrag: IEEE Ultrasonics Symposium, Dresden; 07.10.2012 - 10.10.2012; in: "Proceedings IEEE Ultrasonics Symposium", IEEE, (2012), ISBN: 978-3-99033-045-6.

    Zusätzliche Informationen
  1117. L.F. Aguinsky, G. Wachter, A. Scharinger, F. Rodrigues, A. Toifl, M. Trupke, U. Schmid, A. Hössinger, J. Weinbub:
    "Feature-Scale Modeling of Isotropic SF6 Plasma Etching of Si";
    Poster: Joint International EUROSOI Workshop and International Conference on Ultimate Integration on Silicon (EUROSOI-ULIS), Caen, France; 01.09.2021 - 03.09.2021; in: "Book of Abstracts of the Joint International EUROSOI Workshop and International Conference on Ultimate Integration on Silicon (EUROSOI-ULIS)", (2021), S. 54 - 55.
  1118. A. Aghzout, J. Nicolics, R. Chabicovsky:
    "Investigation of Anisotropic Conductive Adhesive Bondings after Aging and Under High Current Load";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Balatonfüred, Ungarn; 06.05.2000 - 10.05.2000; in: "Proceedings of the 23rd International Spring Seminar on Electronics Technology (ISSE2000)", (2000), S. 241 - 246.
  1119. A. Aghzout, J. Nicolics, R. Chabicovsky:
    "Investigation of anisotropically conductive adhesive interconnections between copper tracks with Pd and Ni/Au finish";
    Poster: International Spring Seminar on Electronics Technology (ISSE), Dresden, Deutschland; 18.05.1999 - 20.05.1999; in: "Proceedings of the 22nd Intern. Spring Seminar on Electronics Technology", (1999), S. 332 - 337.
  1120. A. Aghzout, J. Nicolics:
    "Investigation of the Electric Resistance of Anisotropic Adhesive Bondings for Power Electronic Applications";
    Vortrag: International Spring Seminar on Electronics Technology (ISSE), Neusiedl am See, Austria; 04.05.1998 - 07.05.1998; in: "Proceedings of 21st International Spring Seminar on Electronics Technology (ISSE 98)", Werkstoffe der Elektrotechnik, Wien (1998), ISBN: 3-85465-004-3; S. 146 - 150.

    Zusätzliche Informationen
  1121. A. Adlaßnig, J. Schuster, R. Reicher, W. Smetana:
    "Synthesis of TiCuAg-Thick Film Inks for Glass Frit Free Metallization of Aluminium Nitride";
    Vortrag: 3rd Workshop on Metal-Ceramic Composite Structures, Wien; 05.05.1997; in: "Proceeding of the 3rd Workshop on Metal-Ceramic Composite Structures", (1997), S. 334 - 347.
  1122. N. Adamovic, A. Zimmermann, N. Severino, W. Brenner:
    "EU FP7 Project: On-the-fly alterable thin-film solar modules for design driven applications";
    Vortrag: 10th International Conference on Multi-Material Micro Manufacture (4M) 2013, Vienna, Austria; 09.10.2012 - 11.10.2012; in: "PROCEEDINGS OF THE lOTH INTERNATIONAL CONFERENCE ON MULTI-MATERIAL MICRO MANUFACTURE", Research Publishing, (2013), ISBN: 978-98107-3353-7; S. 317 - 320.

    Zusätzliche Informationen
  1123. N. Adamovic, A. Zimmermann, N. Severino, W. Brenner:
    "SolarDesign Vision: On-the-fly alterable thin-film solar modules for design driven applications";
    Vortrag: 10th International Conference on Nanosciences @ Nanotechnologies (NN13), Thessaloniki, Greece; 09.07.2013 - 12.07.2013; in: "10th International Conference on Nanosciences @ Nanotechnologies (NN13) - Abstract Book", (2013).
  1124. N. Adamovic, A. Zimmermann, M. Rennhofer:
    "Synergizing Austrian Breakthrough Innovation for CI{G)S solar cells";
    Vortrag: PhotoVoltaic Technical Conference 2016 - PVTC 2016, Marseille, F; 09.05.2016 - 11.05.2016; in: "Abstracts of the PhotoVoltaic Technical Conference 2016", (2016).
  1125. N. Adamovic, A. Zimmermann, W. Brenner:
    "The FP7 NMP Project SolarDesign: On-the-fly Alterable Thin-film Solar Modules for Design Driven Applications";
    Vortrag: 14th euspen International Conference, Dubrovnik; 02.06.2014 - 06.06.2014; in: "Proceedings of the 14th euspen International Conference", euspen, (2014), ISBN: 978-0-9566790-3-1; S. 55 - 58.

    Zusätzliche Informationen
  1126. N. Adamovic, A. Zimmermann, M. Acciarri, L. Pilat, H. Huber, L. Maturi:
    "Custom Designed Photovoltoie Modules for PiPV and BiPV Applications Developed within FP7 EU Project Solardesign";
    Vortrag: PhotoVoltaic Technical Conference 2016 - PVTC 2016, Marseille, F; 09.05.2016 - 11.05.2016; in: "Abstracts of the PhotoVoltaic Technical Conference 2016", (2016).
  1127. N. Adamovic, N. Severino, W. Brenner:
    "FP7 EU Project: On-The-Fly Alterable Thin-Film Solar Modules For Design Driven Applications";
    Poster: EuroNanoForum 2013, Dublin, Ireland; 18.06.2013 - 20.06.2013; in: "EuroNanoForum 2013", http://www.euronanoforum2013.eu/conference-proceedings/, (2013).
  1128. N. Adamovic, J. Matovic, L. Zivanov, U. Schmid:
    "Nanofluidic Proton Conductive Structure: Design And Characterization";
    Vortrag: Second ReClMiCo Workshop: New Trends in Integrated Microsystems and Components, Novi Sad, Serbia; 05.03.2010 - 06.03.2010; in: "New Trends in Integrated Microsystems and Components", University of Novs Sad, Faculty of Technical Science, (2010), ISBN: 978-86-7892-287-9; S. 47 - 55.

    Zusätzliche Informationen
  1129. N. Adamovic, J. Matovic, J. Kettle, E. Brousseau:
    "Patterning of Nanomembranes with a Focused-Ion-Beam";
    Poster: 26th International Conference on Microelectronics 2008, Nis, Serbien; 11.05.2008 - 14.05.2008; in: "Proceedings", IEEE, IEEE Catalog No. CFP08432 (2008), ISBN: 978-1-4244-1882-4; S. 103 - 106.

    Zusätzliche Informationen
  1130. N. Adamovic, J. Matovic, L. Federzoni, W. Brenner:
    "Bioimimetic Proton Conductive Membranes for PEMFC";
    Poster: Second CARISMA International Conference 2010, La Grand Motte, France; 19.09.2010 - 22.09.2010; in: "Progress in MEA Materials for Medium and High Temperature Polymer Electrolyte Fuel Cells - Books of Abstracts", (2010), S. 53.

    Zusätzliche Informationen
  1131. N. Adamovic, J. Matovic, L. Federzoni, W. Brenner:
    "FP7 EU Multiplat: Research on Advanced Proton Conductive Membranes for PEMFC";
    Poster: Fuel Cells 2010 - Science & Technology, zaragoza, Spain; 06.10.2010 - 07.10.2010; in: "Fuel Cells 2010 - Science & Technology", (2010).

    Zusätzliche Informationen
  1132. N. Adamovic, J. Matovic, L. Federzoni, W. Brenner:
    "The European Project MultiPlat: "Biomimetic Ultrathin Structures as a Multipurpose Platform for Nanotechnology-based Products"";
    Vortrag: 4M 2010 - 7th International Conference on Multi-Material Micro Manufacture, Bourg en Bresse and Oyonnax, France; 17.11.2010 - 19.11.2010; in: "4M 2010 - Proceedings of the 7th International Conference on Multi-Material Micro Manufacture", Research Publishing, (2010), ISBN: 978-981-08-6555-9; S. 109 - 112.

    Zusätzliche Informationen
  1133. N. Adamovic, G. Goldbeck, E. Ghedini:
    "Ontology Driven Open Translation Environment";
    Vortrag: 14th World Congress in Computational Mechanics (WCCM) - ECCOMAS Congress 2020, Paris, France; 19.07.2020 - 24.07.2020; in: "14th World Congress in Computational Mechanics (WCCM)", (2020), S. 1.
  1134. N. Adamovic, M. Garifulina, A. Zimmermann, W. Brenner:
    "Design Optimization Of Flexible Thin Film Cigs Solar Modules";
    Poster: 10. Österreichische Photovoltaik Tagung, Laxenburg; 18.10.2012 - 19.10.2012; in: "Photovoltaik - Innovationen für den internationalen Wettbewerb", (2012), 1 S.

    Zusätzliche Informationen
  1135. N. Adamovic, L. Federzoni, G. Meinhardt, J. Bihr:
    "Increasing Overall Efficiency By D Eviating Light From Inactive Parts Of Solar Cells And Modules";
    Poster: 8. Österreichische Photovoltaik Tagung, Wien; 28.10.2010 - 29.10.2010; in: "Tagungsband - Proceedings", Bundesministerium für Verkehr, Innovation und Technologie Radetzkystraße 2, 1030 Wien, (2010).

    Zusätzliche Informationen
  1136. N. Adamovic et al.:
    "The European Materials Modelling Leadership Council";
    Vortrag: 1st International Workshop on Software Solutions for ICME, Aachen, D; 24.06.2014 - 27.06.2014; in: "Abstracts Booklet", (2014).
  1137. N. Adamovic, A. Backes, U. Schmid, G. Meinhardt, L. Federzoni, J. Bihr:
    "Reduction of Shading Losses in Solar PV Systems";
    Poster: 8th International Conference on Nanosciences & Nanotechnologies- NN11, Thessaloniki, GR; 12.07.2011 - 15.07.2011; in: "8th International Conference on Nanosciences & Nanotechnologies- NN11 - Abstract Book", (2011), S. 234.

    Zusätzliche Informationen
  1138. N. Adamovic, A. Backes, U. Schmid:
    "Improved Light Management On Standard Silicon Solar Cells & Modules Using Hot Embossing Process";
    Poster: 10. Österreichische Photovoltaik Tagung, Laxenburg; 18.10.2012 - 19.10.2012; in: "Photovoltaik - Innovationen für den internationalen Wettbewerb", (2012), 1 S.

    Zusätzliche Informationen
  1139. N. Adamovic, A. Backes, U. Schmid:
    "Reduction of light losses in standard silicon solar modules by using specially designed optical elements";
    Poster: 10th International Conference on Nanosciences @ Nanotechnologies (NN13), Thessaloniki, Greece; 09.07.2013 - 12.07.2013; in: "10th International Conference on Nanosciences @ Nanotechnologies (NN13) - Abstract Book", (2013).
  1140. N. Adamovic:
    "Custom Designed Thin Film Photovoltaic Modules";
    Vortrag: 12th International Conference on Nanosciences & Nanotechnologies - NN15, Thessaloniki, Greece; 07.07.2015 - 10.07.2015; in: "Book of Abstracts", (2015), S. 37.

    Zusätzliche Informationen
  1141. G. Abraham, R. Duffait, P. Wurmsdobler, A. Matzner, W. Brenner:
    "Principles of Torque Measurement for Rotating Microactuators";
    Vortrag: IEEE Sensors 2002, Orlando, Florida, USA; 11.06.2002 - 14.06.2002; in: "The First IEEE International Conference on Sensors", IEEE Operations Center, Piscataway, NJ (2002), ISBN: 0-7803-7455-x; S. 1 - 5.
  1142. G. Abraham, P. Artemczuk, F. Franek, A. Matzner:
    "Monitoring the Behaviour of Tribo-Systems with Boundary Lubrication";
    Poster: World Tribology Congress, London, GB; 08.09.1997 - 12.09.1997; in: "World Tribology Congress - Abstracts of Papers", Mechanical Engineering Publications Limited, London (1997), ISBN: 1860581099; S. 691.
  1143. A. Ababneh, U. Schmid, J. Hernando-Garcia, J.L. Sànchez-Rojas, H. Seidel:
    "Ermittlung der piezoelektrischen Koeffizienten von AlN-Dünnfilmen mit unterschiedlicher Kristallorientierung";
    Poster: Mikrosystemtechnik Kongress 2009, Berlin, D; 12.10.2009 - 14.10.2009; in: "Mikrosystemtechnik Kongress 2009 - Proceedings", VDE Verlag, (2009), ISBN: 978-3-8007-3183-1.

    Zusätzliche Informationen
  1144. A. Ababneh, G. Marchand, H. Seidel, J. Hernando-Garcia, J.L. Sànchez-Rojas, Ü. Sökmen, E. Peiner, U. Schmid:
    "Comparison Between AlN Thin Films with Different Crystal Orientation for MEMS Applications";
    Vortrag: SPIE Europe: Microtechnologies for the New Millennium, Dresden, Deutschland; 04.05.2009 - 08.05.2009; in: "Proceedings of SPIE", Society of Photo-Optical Instrumentation Engineers (SPIE), 7362-7366 (2009).

    Zusätzliche Informationen
  1145. A. Ababneh, A. Al-Omari, H. Qiu, T. Manzaneque, J. Hernando-Garcia, J.L. Sànchez-Rojas, A. Bittner, U. Schmid, H. Seidel:
    "Pressure Dependence of the Quality Factor of Piezoelectrically driven AlN/Si-Microcantilevers";
    Vortrag: SPIE Microtechnologies 2013, Grenoble, France; 24.04.2013 - 26.04.2013; in: "Proceedings of SPIE", 8763 (2013), ISSN: 0277-786x.

    Zusätzliche Informationen