Publikationsliste für Angehörige von
E317 - Institut für Leichtbau und Struktur-Biomechanik
als Autorinnen / Autoren bzw. wesentlich beteiligte Personen
1822 Datensätze (1974 - 2022)
Die Publikationen der Fakultät für Maschinenwesen und Betriebswissenschaften sind erst ab dem Jahr 2002 vollzählig in der Publikationsdatenbank enthalten. Publikationen aus den Jahren vor 2002 können, müssen aber nicht in der Datenbank vorhanden sein.
Bücher und Buch-Herausgaben
-
C. Bilik:
"Lightweight Structural Methods for Increasing the Buckling Load and Fundamental Frequency of Thin-Walled Structures";
Suedwestdeutscher Verlag fuer Hochschulschriften,
Saarbrücken,
2012,
ISBN: 978-3-8381-2978-5;
190 S.
-
R.D. Bitsche:
"Design and Computational Analysis of Compound Castings and other Multi-Material Structures";
VDI Verlag GmbH,
Düsseldorf,
2009,
ISBN: 978-3-18-332418-7;
127 S.
Zusätzliche Informationen
-
H. J. Böhm:
"Computer Based Micromechanical Investigations of the Thermomechanical Behavior of Metal Matrix Composites";
VDI Verlag GmbH,
Düsseldorf,
1991,
ISBN: 3-18-140118-8;
134 S.
-
H. J. Böhm (Hrg.):
"Mechanics of Microstructured Materials";
Springer-Verlag,
Wien,
2004,
ISBN: 3-211-24154-x;
306 S.
-
H. J. Böhm:
"Mechanics of Microstructured Materials";
in Buchreihe "CISM COURSES AND LECTURES No. 464",
Buchreihen-Herausgeber: W. Schneider et al.;
herausgegeben von: CISM;
Springer-Verlag,
Wien, New York,
2004,
ISBN: 3-211-24154-x,
306 S.
-
T. Daxner:
"Multi-Scale Modeling and Simulation of Metallic Foams";
VDI Verlag GmbH,
Düsseldorf,
2003,
ISBN: 3-18-328518-5;
179 S.
-
K. Dorninger:
"Entwicklung von nichtlinearen FE-Algorithmen zur Berechnung von Schalenkonstruktionen aus Faserverbundstoffen";
VDI Verlag GmbH,
Düsseldorf,
1989,
ISBN: 3-18-146518-6;
234 S.
-
T. Drabek:
"Modeling of Matrix Damage in Particle Reinforced Ductile Matrix Composites";
VDI Verlag GmbH,
Düsseldorf,,
2006,
ISBN: 3-18-330218-7;
122 S.
Zusätzliche Informationen
-
D. Duschlbauer:
"Computational Simulation of the Thermal Conductivity of MMCs under Consideration of the Inclusion-Matrix Interface";
VDI Verlag GmbH,
Düsseldorf,
2004,
ISBN: 3-18-369105-1;
163 S.
-
J. Eberhardsteiner, H. J. Böhm, F. G. Rammerstorfer (Hrg.):
"CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)";
Vienna University of Technology,
Wien,
2012,
ISBN: 978-3-9502481-9-7.
-
J. Eberhardsteiner, H. J. Böhm, Franz Rammerstorfer (Hrg.):
"Book of Abstracts of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)";
Vienna University of Technology,
Wien,
2012,
ISBN: 978-3-9502481-8-0;
447 S.
-
T. Flatscher:
"A Constitutive Model for the Elasto-Plasto-Damage Ply Behavior in Laminated FRP Composites: Its Development, Implementation, and Application in FEM Simulations";
VDI Verlag GmbH,
Düsseldorf,
2010,
ISBN: 978-3-18-332618-1;
148 S.
Zusätzliche Informationen
-
J. Gager:
"Modeling and Simulation Concepts for Advanced Braided Composites";
VDI Verlag GmbH,
Düsseldorf,
2014,
ISBN: 978-3-18-333818-4;
117 S.
Zusätzliche Informationen
-
J. Hult, F. G. Rammerstorfer (Hrg.):
"Engineering Mechanics of Fibre Reinforced Polymers and Composite Structures";
Springer-Verlag,
Wien,
1994,
ISBN: 3-211-82652-1;
314 S.
-
J. Hult, F. G. Rammerstorfer et al.:
"Engineering Mechanics of Fibre Reinforced Polymers and Composite Structures";
in Buchreihe "CISM COURSES AND LECTURES No. 348",
Buchreihen-Herausgeber: W. Schneider et al.;
herausgegeben von: CISM;
Springer-Verlag,
Wien New York,
1994,
ISBN: 3-211-82652-1,
314 S.
-
H.C. Kuhlmann, H. Troger, P.K. Zysset (Hrg.):
"Tagungsband "International Symposium on Trends in Applications of Mathematics to Mechanics (STAMM)"";
Institut für Strömungsmechanik und Wärmeübertragung,
2006,
ISBN: 3-200-00682-x;
171 S.
-
M.H. Luxner:
"Modeling and Simulation of Highly Porous Open Cell Structures - Elasto-Plasticity and Localization versus Disorder and Defects.";
VDI Verlag GmbH,
Düsseldorf,
2006,
ISBN: 3-18-330818-5;
116 S.
Zusätzliche Informationen
-
H.A. Mang, F. G. Rammerstorfer (Hrg.):
"Proceedings of the IUTAM/IACM Symposium on Discretization Methods in Structural Mechanics II";
Kluwer Academic Publishers,
Dordrecht,
1999,
371 S.
Zusätzliche Informationen
-
H.A. Mang, F. G. Rammerstorfer, J. Eberhardsteiner (Hrg.):
"Book of Abstracts of the Fifth World Congress on Computational Mechanics (WCCM V)";
TU Wien,
Wien, Austria,
2002,
ISBN: 3-9501554-1-4;
1490 S.
Zusätzliche Informationen
-
H.A. Mang, F. G. Rammerstorfer, J. Eberhardsteiner (Hrg.):
"Proceedings of the Fifth World Congress on Computational Mechanics (WCCM V)";
TU Wien,
Wien, Austria,
2002,
ISBN: 3-9501554-0-6.
-
S. Nogales:
"Numerical Simulation of the Thermal and Thermomechanical Behavior of Metal Matrix Composites";
VDI Verlag GmbH,
Düsseldorf,
2008,
ISBN: 978-3-18-331718-9;
116 S.
Zusätzliche Informationen
-
D. H. Pahr:
"Experimental and Numerical Investigations of Perforated Laminates";
VDI Verlag GmbH,
Düsseldorf,
2003,
ISBN: 3-18-328418-9;
149 S.
-
H. E. Pettermann:
"Derivation and Finite Element Implementation of Constitutive Material Laws for Multiphase Composites Based on Mori-Tanaka Approaches";
VDI Verlag GmbH,
Düsseldorf,
1997,
ISBN: 3-18-321718-x;
116 S.
-
A.F. Plankensteiner:
"Multiscale Treatment of Heterogeneous Nonlinear Solids and Structures";
VDI Verlag GmbH,
Düsseldorf,
2000,
ISBN: 3-18-324818-2;
163 S.
-
F. G. Rammerstorfer (Hrg.):
"Nonlinear Analysis of Shells by Finite Elements";
Springer-Verlag,
Wien,
1992,
ISBN: 3-211-82416-2;
283 S.
-
F. G. Rammerstorfer:
"Repetitorium Leichtbau";
R. Oldenbourg Verlag,
Wien,
1992,
ISBN: 3-7029-0345-3;
168 S.
-
F. G. Rammerstorfer, I.C. Skrna-Jakl, M. Todt:
"Lightweight Structures";
in Buchreihe "Encyclopedia of Continuum Mechanics",
Buchreihen-Herausgeber: H. Altenbach, A. Öchsner;
Springer,
Berlin, Heidelberg,
2020,
ISBN: 978-3-662-55770-9.
-
T.J. Reiter:
"Functional Adaptation of Bone and Application in Optimal Structural Design";
VDI Verlag GmbH,
Düsseldorf,
1996,
ISBN: 3-18-314517-0;
135 S.
-
K. Scharf:
"Beiträge zur Erfassung des Verhaltens von erdbebenerregten, oberirdischen Tankbauwerken";
VDI Verlag GmbH,
Düsseldorf,
1990,
ISBN: 3-18-149704-5;
232 S.
-
C. Schuecker:
"Mechanism Based Modeling of Damage and Failure in Fiber Reinforced Polymer Laminates";
VDI Verlag GmbH,
Düsseldorf,
2006,
ISBN: 3-18-330318-3;
128 S.
Zusätzliche Informationen
-
M. Seitzberger:
"Contributions to an Efficient Numerical Analysis of the Plastic Collapse Behaviour of Thin-Walled Structures";
VDI Verlag GmbH,
Düsseldorf,
2000,
ISBN: 3-18-324718-6;
180 S.
-
I.C. Skrna-Jakl:
"Numerical and Experimental Investigations of Interlaminar Stresses and Free Edge Effects in Integrally Stiffened, Layered Composite Panels";
VDI Verlag GmbH,
Düsseldorf,
1996,
ISBN: 3-18-318818-x;
146 S.
-
A. Starlinger:
"Development of Efficient Finite Shell Elements for the Analysis of Sandwich Structures under Large Deformations and Global as well as Local Instabilities";
VDI Verlag GmbH,
Düsseldorf,
1991,
ISBN: 3-18-149318-x;
253 S.
-
M.A. Stiftinger:
"Semi-Analytical Finite Element Formulations for Layered Shells with Consideration of Edge Effects";
VDI Verlag GmbH,
Düsseldorf,
1996,
ISBN: 3-18-320318-9;
128 S.
-
A.J. Svobodnik:
"Numerical Treatment of the Elastic-Plastic Macromechanical Behavior of Longfiber-Reinforced Metal Matrix Composites";
VDI Verlag GmbH,
Düsseldorf,
1990,
ISBN: 3-18-149018-0;
185 S.
-
P.J. Thurner, D. Pahr, Ch. Hellmich (Hrg.):
"Book of Abstracts of the 25th Congress of the European Society of Biomechanics (ESB 2019)";
TU Verlag,
2019,
ISBN: 978-3-903024-96-0;
713 S.
-
W.K. Vonach:
"A General Solution to the Wrinkling Problem of Sandwiches";
VDI Verlag GmbH,
Düsseldorf,
2001,
ISBN 3-18-32618-3;
98 S.
-
E. Weissenbek:
"Finite Element Modelling of Discontinuously Reinforced Metal Matrix Composites";
VDI Verlag GmbH,
Düsseldorf,
1994,
ISBN: 3-18-316418-3;
120 S.
-
G. Wimmer:
"Computational Methods for the Prediction of Emergence and Growth of Delaminations in Laminated Composite Components";
VDI Verlag GmbH,
Düsseldorf,
2009,
ISBN: 978-3-18-332018-9;
131 S.
Zusätzliche Informationen
Zeitschriftenartikel
-
O. Červinek, B. Werner, D. Koutný, O. Vaverka, L. Pantělejev, D. Palousek:
"Computational Approaches of Quasi-Static Compression Loading of SS316L Lattice Structures Made by Selective Laser Melting";
Materials,
14
(2021),
S. 2462.
-
C.A. Abel, E. Weissenbek, F. G. Rammerstorfer:
"Influence of Damage on the Mechanical Behaviour of Short Fiber Reinforced MMCs with Strong and Weak Interfaces";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik,
73
(1993),
S. 423
- 426.
-
M. Amini, A.G. Reisinger, L. Hirtler, D. H. Pahr:
"Which experimental procedures influence the apparent proximal femoral stiffness? A parametric study";
BMC Musculoskeletal Disorders,
22
(2021),
815;
S. 1
- 14.
-
M. Amini, A.G. Reisinger, D. H. Pahr:
"Influence of processing parameters on mechanical properties of a 3D‐printed trabecular bone microstructure";
Journal of Biomedical Materials Research Part B: Applied Biomaterials,
108
(2020),
S. 38
- 47.
-
N Amraish, A.G. Reisinger, D. H. Pahr:
"Robust Filtering Options for Higher-Order Strain Fields Generated by Digital Image Correlation";
Applied Mechanics,
1
(2020),
S. 174
- 192.
-
N. Amraish, A.G. Reisinger, D. H. Pahr:
"A novel specimen shape for measurement of linear strain fields by means of digital image correlation";
Scientific Reports,
11
(2021),
17515;
S. 1
- 13.
-
O.G. Andriotis, S.W. Chang, M. Vanleene, P.H. Howarth, D.E. Davies, S. Shefelbine, M.J. Buehler, P.J. Thurner:
"Structure-Mechanics Relationships of Collagen Fibrils in the Osteogenesis Imperfecta Mouse Model";
Journal of the Royal Society Interface,
12
(2015),
111 20150701.
Zusätzliche Informationen
-
O.G. Andriotis, S. Dessissaire, P.J. Thurner:
"Collagen Fibrils: Nature's Highly Tunable Nonlinear Springs";
ACS Nano,
12
(2018),
S. 3671
- 3680.
Zusätzliche Informationen
-
O.G. Andriotis, K. Elsayad, D.E. Smart, M. Nalbach, D.E. Davies, P.J. Thurner:
"Hydration and nanomechanical changes in collagen fibrils bearing advanced glycation end-products";
Biomedical Optics Express,
10
(2019),
4;
S. 1841
- 1855.
-
O.G. Andriotis, W. Manuyakorn, J. Zekonyte, O.L. Katsamenis, S. Fabri, P.H. Howarth, D.E. Davies, P.J. Thurner:
"Nanomechanical Assessment of Human and Murine Collagen Fibrils via Atomic Force Microscopy Cantilever-Based Nanoindentation";
Journal of the Mechanical Behavior of Biomedical Materials,
39
(2014),
S. 9
- 26.
Zusätzliche Informationen
-
T. Antretter, F.D. Fischer, F. G. Rammerstorfer, G. Zickler:
"Free Edges at Bilayered Compounds - A Short Analytical and Numerical Reconsideration";
Archive of Applied Mechanics,
86
(2016),
S. 2053
- 2061.
Zusätzliche Informationen
-
T. Antretter, A.F. Plankensteiner, F.D. Fischer, F. G. Rammerstorfer:
"Multiscale Modeling of Highly Heterogeneous MMCs";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik,
79
(1999),
Supplement 1;
S. 127
- 130.
-
S. Bailey, G.E. Sroga, B. Hoac, O.L. Katsamenis, Z. Wang, N. Bouropoulos, M.D. McKee, E.S. Sørensen, P.J. Thurner, D. Vashishth:
"The role of extracellular matrix phosphorylation on energy dissipation in bone";
ELIFE,
9
(2020),
e58184.
-
M. Bartosik, H. J. Böhm, C. Krywka, Z. Zhang, P.H. Mayrhofer:
"Influence of Phase Transformation on the Damage Tolerance of Ti-Al-N Coatings";
Vacuum,
155
(2018),
S. 153
- 157.
Zusätzliche Informationen
-
M. Bartosik, M. Todt, D. Holec, J. Todt, Z. Zhang, L. Zhou, H. Riedl, H. J. Böhm, F. G. Rammerstorfer, P.H. Mayrhofer:
"Thermal Expansion of Rock-Salt Cubic AlN";
Applied Physics Letters,
107
(2015),
071602.
Zusätzliche Informationen
-
F. Bauer, H. J. Böhm, F.D. Fischer, F. G. Rammerstorfer:
"Finite Element Analysis of Drastic Shape Changes of Cylinders Due to Thermal Cycling";
Computers and Structures,
26
(1987),
S. 263
- 274.
-
S. Baumbach, R. Schmidt, P. Varga, V. Vécsei, P.K. Zysset:
"Where is the Distal Fracture Line Location of Dorsally Displaced Distal Radius Fractures";
Journal of Orthopaedic Research,
29
(2011),
4;
S. 489
- 494.
Zusätzliche Informationen
-
S.F. Baumbach, J. Binder, A. Synek, F.G. Mück, Y. Chevalier, E. Euler, G. Langs, L. Fischer:
"Analysis of the Three-Dimensional Anatomical Variance of the Distal Radius Using 3D Shape Models";
BMC Medical Imaging,
17
(2017),
23.
Zusätzliche Informationen
-
S.F. Baumbach, E. Dall´Ara, P. Weninger, A. Antoni, P.K. Zysset:
"Assessment of a Novel Biomechanics Fracture Model for Distal Radius Fractures";
BMC Musculoskeletal Disorders,
13
(2012),
252.
Zusätzliche Informationen
-
S.F. Baumbach, A. Synek, H. Traxler, W. Mutschler, D. H. Pahr, Y. Chevalier:
"The Influence of Distal Screw Length on the Primary Stability of Volar Plate Osteosynthesis - A Biomechanical Study";
Journal of Orthopaedic Surgery and Research,
10
(2015),
139;
8 S.
Zusätzliche Informationen
-
E. Benca, M. Amini, D. H. Pahr:
"Effect of CT imaging on the accuracy of the finite element modelling in bone";
European Radiology Experimental,
4
(2020),
51.
-
E. Benca, B. Ferrante, M. Zalaudek, L. Hirtler, A. Synek, F. Kainberger, R. Windhager, R. Brånemark, G. Hobusch, E. Unger:
"Thermal Effects during Bone Preparation and Insertion of Osseointegrated Transfemoral Implants";
Sensors,
21
(2021),
6267;
S. 1
- 11.
-
E. Benca, J. Patsch, W. Mayr, D. H. Pahr, R. Windhager:
"The Insufficiencies of Risk Analysis of Impending Pathological Fractures in Patients with Femoral Metastases: A Literature Review";
Bone Reports,
5
(2016),
S. 51
- 56.
Zusätzliche Informationen
-
E. Benca, A.G. Reisinger, J. Patsch, L. Hirtler, A. Synek, S. Stenicka, R. Windhager, W. Mayr, D. H. Pahr:
"Effect of Simulated Metastatic Lesions on the Biomechanical Behavior on the Proximal Femur";
Journal of Orthopaedic Research,
35
(2017),
11;
S. 2407
- 2414.
Zusätzliche Informationen
-
E. Benca, A. Synek, M. Amini, F. Kainberger, L. Hirtler, R. Windhager, W. Mayr, D. H. Pahr:
"QCT-based finite element prediction of pathologic fractures in proximal femora with metastatic lesions";
Scientific Reports,
9
(2019),
10305;
9 S.
-
C. Bilik, D. H. Pahr, F. G. Rammerstorfer:
"A Bead Laying Algorithm for Enhancing the Stability and Dynamic Behavior of Thin-Walled Structures";
Acta Mechanica,
223
(2012),
8;
S. 1621
- 1631.
Zusätzliche Informationen
-
C. Bilik, F. G. Rammerstorfer, G. Figala, B. Buchmayr:
"Computational Modelling of Laser Treatment of Plates for Increased Buckling Loads and Natural Frequencies";
Journal of Mechanical Engineering Science,
225
(2011),
10;
S. 2385
- 2398.
Zusätzliche Informationen
-
R.D. Bitsche, Z. Khalil, U. Noster, F. G. Rammerstorfer:
"Simulation von Stahl-Leichtmetall Verbundguss Strukturen - Herstellung und mechanisches Verhalten";
Druckguss,
2008
(2008),
07;
S. 283
- 288.
Zusätzliche Informationen
-
R.D. Bitsche, U. Noster, C. Peterlechner:
"Fügepartner schlüssig zu Leichtbaukomponenten verbinden? Simulation von Hybridguss-Verbindungen";
lightweightdesign,
1
(2008),
2;
S. 30
- 34.
Zusätzliche Informationen
-
B.J. Bjork, Q.T. Bui, O. H. Heckl, P. B. Changala, B. Spaun, P. Heu, D. Follman, C. Deutsch, G. D. Cole, M. Aspelmeyer, J. Ye:
"Direct frequency comb measurement of OD + CO → DOCO kinetics";
Science,
354
(2016),
6311;
S. 444
- 448.
-
H. J. Böhm:
"Comparison of Analytical and Numerical Models for the Thermoelastic Behavior of Composites Reinforced by Coated Spheres";
International Journal of Engineering Science,
142
(2019),
S. 216
- 229.
Zusätzliche Informationen
-
H. J. Böhm:
"Continuum Models for the Thermomechanical Behavior of Discontinuously Reinforced Materials";
Advanced Materials,
6
(2004),
8;
S. 626
- 633.
Zusätzliche Informationen
-
H. J. Böhm:
"Numerical Investigation of Microplasticity Effects in Unidirectional Longfiber Reinforced Metal Matrix Composites";
Modelling and Simulation in Materials Science and Engineering,
1
(1993),
S. 649
- 671.
Zusätzliche Informationen
-
H. J. Böhm, H.P. Degischer, W. Lacom:
"Experimental and Theoretical Study of the Thermal Expansion Behavior of Ceramic Fiber Reinforced Aluminium;";
Composites Engineering,
5
(1995),
1;
S. 37
- 49.
Zusätzliche Informationen
-
H. J. Böhm, D. Duschlbauer, T. Drabek, O. Kolednik, G.X. Shan, C.M. Chimani:
"Estudios Numéricos de Sensibilidad a Grietas en Hilos de Colada Continua";
Siderurgia,
129
(2005),
S. 19
- 25.
Zusätzliche Informationen
-
H. J. Böhm, D. Duschlbauer, H. E. Pettermann, J. Segurado, A. F. Plankensteiner:
"Modeling of the Densification of Porous Molybdenum by a Unit Cell Approach";
Journal of the Mechanical Behavior of Materials,
19
(2009),
5;
S. 289
- 296.
Zusätzliche Informationen
-
H. J. Böhm, A. Eckschlager, W. Han:
"Multi-Inclusion Unit Cell Models for Metal Matrix Composites with Randomly Oriented Discontinuous Reinforcements";
Computational Materials Science,
25
(2002),
S. 42
- 53.
Zusätzliche Informationen
-
H. J. Böhm, F.D. Fischer:
"Corrigendum to 'Evaluation of Elastic Strain Energy of Spheroidal Inclusions with Uniform Volumetric and Shear Eigenstress'";
Scripta Materialia,
49
(2003),
S. 107.
-
H. J. Böhm, F.D. Fischer, F. G. Rammerstorfer, T. Siegmund:
"Microscale Arrangement Effects on the Thermomechanical Behavior of Advanced Two-Phase Composites";
Journal of Engineering Materials and Technology,
116
(1994),
3;
S. 268
- 273.
Zusätzliche Informationen
-
H. J. Böhm, F.D. Fischer, G. Reisner:
"Elastic Strain Energy of Spheroidal Inclusions with Volumetric and Shear Eigenstrains";
Scripta Materialia,
36
(1997),
9;
S. 1053
- 1059.
-
H. J. Böhm, W. Han:
"Comparisons Between Three-Dimensional and Two-Dimensional Multi-Particle Unit Cell Methods for Particle Reinforced Composites";
Modelling and Simulation in Materials Science and Engineering,
9
(2001),
2;
S. 47
- 65.
Zusätzliche Informationen
-
H. J. Böhm, W. Han, A. Eckschlager:
"Multi-Inclusion Unit Cell Studies of Reinforcement Stresses and Particle Failure in Discontinuously Reinforced Ductile Matrix Composites";
CMES - Computer Modeling in Engineering and Sciences,
5
(2004),
1;
S. 5
- 20.
Zusätzliche Informationen
-
H. J. Böhm, S. Nogales:
"Mori-Tanaka Models for the Thermal Conductivity of Composites with Interfacial Resistance and Particle Size Distributions";
Composites Science and Technology,
68
(2008),
5;
S. 1181
- 1187.
Zusätzliche Informationen
-
H. J. Böhm, F. G. Rammerstorfer:
"Micromechanical Investigation of the Processing and Loading of Fiber Reinforced Metal Matrix Composites";
Materials Science and Engineering A,
A135
(1991),
S. 185
- 188.
Zusätzliche Informationen
-
H. J. Böhm, F. G. Rammerstorfer, R. Schmid, A. Starlinger, R. Slavicek:
"Numerical Modelling and Nonlinear Analysis of the Behaviour of Maxillary Partial Denture";
Engineering Computations,
7
(1990),
4;
S. 338
- 343.
Zusätzliche Informationen
-
H. J. Böhm, F. G. Rammerstorfer, E. Weissenbek:
"Some Simple Models for Micromechanical Investigations of Fiber Arrangement Effects in MMCs";
Computational Materials Science,
1
(1993),
3;
S. 177
- 194.
Zusätzliche Informationen
-
H. J. Böhm, A. Rasool:
"Effects of Particle Shape on the Thermoelastoplastic Behavior of Particle Reinforced Composites";
International Journal of Solids and Structures,
87
(2016),
S. 90
- 101.
Zusätzliche Informationen
-
H. J. Böhm, P.J. Thurner:
"Leichtbau und Biomechanik auf allen Längenskalen - das Institut für Leichtbau und Strukturbiomechanik der TU Wien";
ÖIAZ,
161
(2016),
S. 195
- 200.
Zusätzliche Informationen
-
H. J. Böhm, G. Zickler, F.D. Fischer, J. Svoboda:
"Role of Elastic Strain Energy in Spheroidal Precipitates Revisited";
Mechanics of Materials,
155
(2021),
103781.
Zusätzliche Informationen
-
H. J. Böhm, G. Zickler, F.D. Fischer, J. Svoboda:
"Strain and Interface Energy of Ellipsoidal Inclusions Subjected to Volumetric Eigenstrains";
Archive of Applied Mechanics,
92
(2022),
S. 405
- 411.
Zusätzliche Informationen
-
L. Boledi, B. Terschanski, S. Elgeti, J. Kowalski:
"A level-set based space-time finite element approach to the modelling of solidification and melting processes";
Journal of Computational Physics,
457
(2022),
111047;
S. 1
- 19.
-
B. Brendel, F.D. Fischer, E. Ramm, F. G. Rammerstorfer:
"Linear and Nonlinear Stability Analysis of Thin Cylindrical Shells Under Wind Loads";
Journal of Structural Mechanics,
9
(1981),
1;
S. 91
- 113.
-
T. Brynk, Ch. Hellmich, A. Fritsch, P.K. Zysset, J. Eberhardsteiner:
"Experimental Poromechanics of Trabecular Bone Strength: Role of Terzaghi's Effective Stress and of Tissue Level Stress Fluctuations";
Journal of Biomechanics,
44
(2011),
S. 501
- 508.
Zusätzliche Informationen
-
V. A. Buryachenko, F. G. Rammerstorfer:
"Elastic Stress Fluctuations in Random Structure Particulate Composites";
European Journal of Mechanics - A/Solids,
16
(1997),
S. 79
- 102.
-
V. A. Buryachenko, F. G. Rammerstorfer:
"On the thermo-elasto-statics of composites with coated randomly distributed inclusions";
International Journal of Solids and Structures,
37
(2000),
23;
S. 3177
- 3200.
Zusätzliche Informationen
-
V. A. Buryachenko, F. G. Rammerstorfer:
"On the Thermoelasticity of Random Structure Particulate Composites";
Zeitschrift für Angewandte Mathematik und Physik,
50
(1999),
6;
S. 934
- 947.
Zusätzliche Informationen
-
V. A. Buryachenko, F. G. Rammerstorfer, A. F. Plankensteiner:
"A Local Theory of Elastoplastic Deformation of Two-Phase Metal Matrix Random Structure Composites";
Journal of Applied Mechanics - Transactions of the ASME,
69
(2002),
4;
S. 489
- 496.
Zusätzliche Informationen
-
V.A. Buryachenko:
"Some Nonlocal Effects in Graded Random Structure Matrix Composites";
Mechanics Research Communications,
25
(1998),
S. 117
- 122.
-
V.A. Buryachenko:
"The Overall Elastoplastic Behavior of Multiphase Materials with Isotropic Components";
Acta Mechanica,
119
(1996),
1-4;
S. 93
- 117.
Zusätzliche Informationen
-
V.A. Buryachenko, F. G. Rammerstorfer:
"Thermoelastic Stress Fluctuations in Random-Structure Coated Particulate Composites";
European Journal of Mechanics - A/Solids,
17
(1998),
S. 763
- 788.
Zusätzliche Informationen
-
V.A. Buryachenko, F. G. Rammerstorfer:
"Thinly Coated Inclusion with Stress Free Strains in an Elastic Medium";
Mechanics Research Communications,
23
(1996),
S. 505
- 509.
-
V.A. Buryachenko, F. G. Rammerstorfer, A.F. Plankensteiner:
"A Local Theory of Elastoplastic Deformations of Random Structure Composites";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik,
77
(1997),
Supplement 1;
S. 61
- 62.
-
D. Cejka, D. Parada-Rodriguez, S. Pichler, R. Marculescu, I. Kramer, M. Kneissl, T. Gross, A.G. Reisinger, D. H. Pahr, M.C. Monier-Faugere, M. Haas, H.H. Malluche:
"Only Minor Differences in Renal Osteodystrophy Features between Wild-Type and Sclerostin Knockout Mice with Chronic Kidney Disease";
Kidney International,
90
(2016),
4;
S. 828
- 834.
Zusätzliche Informationen
-
M. Charlebois, M. Jirásek, P.K. Zysset:
"A Nonlocal Constitutive Model for Trabecular Bone Softening in Compression";
Biomechanics and Modeling in Mechanobiology,
9
(2010),
5;
S. 597
- 611.
Zusätzliche Informationen
-
M. Charlebois, M. Pretterklieber, P.K. Zysset:
"The Role of Fabric in the Large Strain Compressive Behavior of Human Trabecular Bone";
Journal of Biomechanical Engineering - Transactions of the ASME,
132
(2010),
12;
S. 121006.
Zusätzliche Informationen
-
Y. Chevalier, M. Charlebois, P. Varga, D. H. Pahr, P. Heini, E. Schneider, P.K. Zysset:
"A Patient-Specific Finite Element Methodology to Predict Damage Accumulation in Vertebral Bodies under Axial Compression, Sagittal Flexion and Combined Loads";
Computer Methods in Biomechanics and Biomedical Engineering,
11
(2008),
5;
S. 477
- 487.
Zusätzliche Informationen
-
Y. Chevalier, D. H. Pahr, H. Allmer, M. Charlebois, P.K. Zysset:
"Validation of a Voxel-Based FE Method for Prediction of the Uniaxial Apparent Modulus of Human Trabecular Bone Using Macroscopic Mechanical Tests and Indentation";
Journal of Biomechanics,
40
(2007),
15;
S. 3333
- 3340.
Zusätzliche Informationen
-
Y. Chevalier, D. H. Pahr, M. Charlebois, P. Heini, E. Schneider, P.K. Zysset:
"Cement Distribution, Volume and Compliance in Vertebroplasty: Some Answers from an Anatomy-Based Nonlinear Finite Element Study";
Spine,
33
(2008),
16;
S. 1722
- 1730.
Zusätzliche Informationen
-
Y. Chevalier, D. H. Pahr, P.K. Zysset:
"The Role of Cortical Shell and Trabecular Fabric in Finite Element Analysis of the Human Vertebral Body";
Journal of Biomechanical Engineering - Transactions of the ASME,
131
(2009),
S. 111003-1
- 111003-12.
Zusätzliche Informationen
-
Y. Chevalier, E. Quek, B. Borah, G. Gross, J. Stewart, T. Lang, P.K. Zysset:
"Biomechanical Effets of Teriparatide in Women with Osteoporosis Treated Previously with Alendronate and Risedronate: Results from Quantitative Computed Tomography-Based Finite Element Analysis of the Vertebral Body";
Bone,
46
(2010),
1;
S. 41
- 48.
Zusätzliche Informationen
-
Y. Chevalier, P.K. Zysset:
"A Patient-Specific Computer Tomography-Based Finite Element Methodology to Calculate the Six Dimensional Stiffness Matrix of Human Vertebral Bodies";
Journal of Biomechanical Engineering - Transactions of the ASME,
134
(2012),
5; 041006.
Zusätzliche Informationen
-
Y. Chevalier, P.K. Zysset:
"A Patient-Specific CT-Based Finite Element Methodology to Calculate the 6D Stiffness Matrix of Vertebral Bodies";
Computer Methods in Biomechanics and Biomedical Engineering,
12
(2009),
S1;
S. 77
- 79.
Zusätzliche Informationen
-
C. Chimani, G.X. Shan, K. Mörwald, O. Kolednik, H. J. Böhm, D. Duschlbauer, T. Drabek:
"Micromechanical Evaluation of Intergranular Crack Growth under Continuous Casting Conditions;";
Revue de Métallurgie,
103
(2006),
3;
S. 131
- 138.
Zusätzliche Informationen
-
C.M. Chimani, H. J. Böhm, F. G. Rammerstorfer:
"On Interface Edge Singularities in Layered Composites";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik,
78
(1998),
Supplement 1;
S. 49
- 52.
-
C.M. Chimani, H. J. Böhm, F. G. Rammerstorfer:
"On Stress Singularities at Free Edges of Bimaterial Junctions - A Micromechanical Study";
Scripta Materialia,
36
(1997),
8;
S. 943
- 947.
Zusätzliche Informationen
-
C.M. Chimani, F. G. Rammerstorfer, H. J. Böhm:
"On Curvature Effects on the Materials Description of Unidirectionally Reinforced Composite Materials";
Computer Methods in Applied Mechanics and Engineering,
185
(2000),
2-4;
S. 191
- 201.
Zusätzliche Informationen
-
K.Y. Ching, O.G. Andriotis, S. Li, P. Basnett, B. Su, Rahul S. Tare, B.G. Sengers, M. Stolz:
"Nanofibrous Poly(3-Hydroxybutyrate)/Poly(3-Hydroxyoctanoate) Scaffolds Provide a Functional Microenvironment for Cartilage Repair";
Journal of Biomaterials Applications,
31
(2016),
S. 77
- 91.
Zusätzliche Informationen
-
K.Y. Ching, O.G. Andriotis, B.G. Sengers, M. Stolz:
"Genipin crosslinked chitosan/PEO nanofibrous scaffolds exhibiting an improved microenvironment for the regeneration of articular cartilage";
Journal of Biomaterials Applications,
36
(2021),
3;
S. 503
- 516.
-
C.J. Collins, M. Kozyrev, M. Frank, O.G. Andriotis, R. Byrne, H. Kiener, M. Pretterklieber, P.J. Thurner:
"The impact of age, mineralization, and collagen orientation on the mechanics of individual osteons from human femurs";
Materialia,
9
(2020),
100573.
-
M.J. Cordill, F.D. Fischer, F. G. Rammerstorfer, G. Dehm:
"Adhesion Energies of Cr Thin Films on Polyimide Determined from Buckling: Experiment and Model;";
Acta Materialia,
58
(2010),
16;
S. 5520
- 5531.
Zusätzliche Informationen
-
L.V. Coutts, T. Jenkins, D. G. Dunlop, R.O.C. Oreffo, C. Cooper, N.C. Harvey, P.J. Thurner:
"Variability in Reference Point Microindentation and Recommendations for Testing Cortical Bone: Location, Thickness,and Orientation Heterogeneity";
Journal of the Mechanical Behavior of Biomedical Materials,
46
(2015),
S. 292
- 304.
Zusätzliche Informationen
-
L.V. Coutts, T. Jenkins, R.O.C. Oreffo, D. G. Dunlop, C. Cooper, N.C. Harvey, P.J. Thurner:
"Local Variation in Femoral Neck Cortical Bone: In Vitro Measured Bone Mineral Density, Geometry and Mechanical Properties";
Journal of Clinical Densitometry,
20
(2017),
2;
S. 205
- 215.
Zusätzliche Informationen
-
A. Curnier, P.K. Zysset:
"A Family of Metric Strains and Conjugate Stresses, Prolonging Usual Material Laws from Small to Large Transformations";
International Journal of Solids and Structures,
43
(2006),
10;
S. 3057
- 3086.
Zusätzliche Informationen
-
E. Dall´Ara, R. Eastell, M. Viceconti, D. H. Pahr, L. Yang:
"Experimental Validation of DXA-Based Finite Element Models for Prediction of Femoral Strengt";
Journal of the Mechanical Behavior of Biomedical Materials,
63
(2016),
S. 17
- 25.
Zusätzliche Informationen
-
E. Dall´Ara, C. Karl, G. Mazza, G. Franzoso, P. Vena, M. Pretterklieber, D. H. Pahr, P.K. Zysset:
"Tissue Properties of the Human Vertebral Body Sub-Structures Evaluated by Means of Microindentation";
Journal of the Mechanical Behavior of Biomedical Materials,
25
(2013),
S. 23
- 32.
Zusätzliche Informationen
-
E. Dall´Ara, B. Luisier, R. Schmidt, F. Kainberger, P.K. Zysset, D. H. Pahr:
"A Nonlinear QCT-Based Finite Element Model Validation Study for the Human Femur Tested in Two Configurations in Vitro";
Bone,
52
(2013),
1;
S. 27
- 38.
Zusätzliche Informationen
-
E. Dall´Ara, B. Luisier, R. Schmidt, F. Kainberger, P.K. Zysset, D. H. Pahr:
"DXA Predictions of Human Femoral Mechanical Properties Depend on the Load Configuation";
Medical Engineering & Physics,
35
(2013),
11;
S. 1564
- 1572.
Zusätzliche Informationen
-
E. Dall´Ara, C. Öhman, M. Baleani, M. Vicenconti:
"Reduced Tissue Hardness of Tabecular Bone is Associated with Severe Osteoarthritis";
Journal of Biomechanics,
44
(2011),
8;
S. 1593
- 1598.
Zusätzliche Informationen
-
E. Dall´Ara, D. H. Pahr, P. Varga, F. Kainberger, P.K. Zysset:
"QCT-Based Finite Element Models Predict Human Vertebral Strength in Vitro Significantly Better than Simulated DEXA";
Osteoporosis International,
23
(2012),
2;
S. 563
- 572.
Zusätzliche Informationen
-
E. Dall´Ara, R. Schmidt, D. H. Pahr, P. Varga, Y. Chevalier, J. Patsch, F. Kainberger, P.K. Zysset:
"A Nonlinear Finite Element Model Validation Study Based on a Novel Experimental Technique for Inducing Anterior Wedge-Shape Fractures in Human Vertebral Bodies";
Journal of Biomechanics,
43
(2010),
S. 2374
- 2380.
Zusätzliche Informationen
-
E. Dall´Ara, R. Schmidt, P.K. Zysset:
"Microindentation Can Discriminate Between Damaged and Intact Human Bone Tissue";
Bone,
50
(2012),
4;
S. 925
- 929.
Zusätzliche Informationen
-
E. Dall´Ara, P. Varga, D. H. Pahr, P.K. Zysset:
"A Calibration Methodology of QCT BMD for Human Vertebral Body with Registered Micro-CT Images";
Medical Physics,
38
(2011),
5;
S. 2602
- 2608.
Zusätzliche Informationen
-
B. Daum, G. Dehm, H. Clemens, M. Rester, F.D. Fischer, F. G. Rammerstorfer:
"Elastoplastic Buckling as Source of Misinterpretation of Micropillar Tests";
Acta Materialia,
61
(2013),
13;
S. 4996
- 5007.
Zusätzliche Informationen
-
B. Daum, F. G. Rammerstorfer:
"The Symmetric Buckling Mode in Laminated Elastoplastic Micro-Structures Under Plane Strain";
Acta Mechanica,
227
(2016),
10;
S. 2843
- 2859.
Zusätzliche Informationen
-
T. Daxner, R.D. Bitsche, H. J. Böhm:
"Space-Filling Polyhedra as Mechanical Models for Solidified Dry Foam";
Materials Transactions,
47
(2006),
9;
S. 2213
- 2216.
Zusätzliche Informationen
-
T. Daxner, H. J. Böhm, F. G. Rammerstorfer:
"Mesoscopic Simulation of Inhomogeneous Metallic Foams with Respect to Energy Absorption";
Computational Materials Science,
16
(1999),
1-4;
S. 61
- 69.
Zusätzliche Informationen
-
T. Daxner, H. J. Böhm, F. G. Rammerstorfer, R. Denzer, M. Maier:
"Simulation des elasto-plastischen Materialverhaltens von Metallschaum mit Hilfe von 2D und 3D Einheitszellen-Modellen";
Materialwissenschaft und Werkstofftechnik,
31
(2000),
S. 447
- 450.
Zusätzliche Informationen
-
T. Daxner, F.D. Fischer, F. G. Rammerstorfer:
"Stability of Rod-Shaped Nanoparticles Embedded in an Elastic Matrix";
Philosophical Magazine,
90
(2010),
15;
S. 2027
- 2048.
Zusätzliche Informationen
-
T. Daxner, M.H. Luxner, F. G. Rammerstorfer:
"Pre-Tensioned Belts Overhanging Elastic Rollers";
PAMM,
5
(2005),
1;
S. 649
- 650.
-
T. Daxner, F. G. Rammerstorfer, H. J. Böhm:
"Adaptation of Density Distributions for Optimising Aluminium Foam Structures";
Materials Science and Technology,
16
(2000),
7-8;
S. 935
- 939.
Zusätzliche Informationen
-
T. Daxner, F. G. Rammerstorfer, F.D. Fischer:
"Instability Phenomena During the Conical Expansion of Circular Cylindrical Shells";
Computer Methods in Applied Mechanics and Engineering,
194
(2005),
S. 2591
- 2603.
Zusätzliche Informationen
-
T. Daxner, F. G. Rammerstorfer, J. Segurado, H. E. Pettermann:
"Numerical Simulations of the Creep Deformation of MMCs in 4-Point Bending Mode";
Journal of Engineering Materials and Technology,
125
(2003),
1;
S. 50
- 55.
Zusätzliche Informationen
-
H.E. Dechant, O. Friedrich, F. G. Rammerstorfer, F.G. Barth:
"Tactile Hairs of a Spider I: Mechanics and Finite Element Analysis";
Zoologie,
102
(1999),
S. ##.
-
H.E. Dechant, B. Hößl, F. G. Rammerstorfer, F.G. Barth:
"Arthropod Mechanoreceptive Hairs: Modeling the Directionality of the Joint";
Journal of Comparative Physiology A,
192
(2006),
S. 1271
- 1278.
Zusätzliche Informationen
-
H.E. Dechant, F. G. Rammerstorfer, F.G. Barth:
"Arthropod Touch Reception: Stimulus Transformation and Finite Element Model of Spider Tactile Hairs";
Journal of Comparative Physiology A,
187
(2001),
4;
S. 313
- 322.
Zusätzliche Informationen
-
J. Deutschmann, J. Patsch, A. Valentinitsch, P. Pietschmann, P. Varga, E. Dall´Ara, P.K. Zysset, G.W. Weber, H. Resch, F. Kainberger:
"Research Network Osteology Vianna: Hochauflösende und Mikro-Computertomographie in der Wiener Osteologie";
Journal für Mineralstoffwechsel,
17
(2010),
3;
S. 104
- 109.
Zusätzliche Informationen
-
A. Dobos, J. Van Hoorick, W. Steiger, P. Gruber, M. Markovic, O.G. Andriotis, A. Rohatschek, P. Dubruel, P.J. Thurner, S. Van Vlierberghe, S. Baudis, A. Ovsianikov:
"Thiol-Gelatin-Norbornene Bioink for Laser-Based High-Definition Bioprinting";
Advanced Healthcare Materials,
9
(2019),
1900752.
-
K. Dorninger, F. G. Rammerstorfer:
"A Layered Composite Shell Element for Elastic and Thermoelastic Stress and Stability Analysis at Large Deformations";
International Journal for Numerical Methods in Engineering,
30
(1990),
4;
S. 833
- 858.
Zusätzliche Informationen
-
T. Drabek, H. J. Böhm:
"Damage Models for Studying Ductile Matrix Failure in Composites";
Computational Materials Science,
32
(2005),
3;
S. 329
- 336.
Zusätzliche Informationen
-
T. Drabek, H. J. Böhm:
"Micromechanical Finite Element Analysis of Metal Matrix Composites Using Nonlocal Ductile Failure Models";
Computational Materials Science,
37
(2006),
1-2;
S. 29
- 36.
Zusätzliche Informationen
-
Ch. J. Dunmore, M.M. Skinner, A. Bardo, L.R. Berger, J. Hublin, D. H. Pahr, A. Rosas, N.B. Stephens, T.L. Kivell:
"The position of Australopithecus sediba within fossil hominin hand use diversity";
Nature Ecology & Evolution,
4
(2020),
S. 911
- 918.
-
D. Duschlbauer, H. J. Böhm, H. E. Pettermann:
"Computational Simulation of Composites Reinforced by Planar Random Fibers: Homogenization and Localization by Unit Cell and Mean Field Approaches";
Journal of Composite Materials,
40
(2006),
24;
S. 2217
- 2234.
Zusätzliche Informationen
-
D. Duschlbauer, H. J. Böhm, H. E. Pettermann:
"Modeling Interfacial Effects on the Thermal Conduction Behavior of Short Fiber Reinforced Composites";
International Journal of Materials Research,
2011
(2011),
6;
S. 717
- 726.
Zusätzliche Informationen
-
D. Duschlbauer, H. J. Böhm, H. E. Pettermann:
"Numerical Simulation of Thermal Conductivity of MMCs: Effect of Thermal Interface Resistance";
Materials Science and Technology,
19
(2003),
8;
S. 1107
- 1114.
Zusätzliche Informationen
-
D. Duschlbauer, H. E. Pettermann, H. J. Böhm:
"Heat Conduction of a Spheroidal Inhomogeneity with Imperfectly Bonded Interface";
Journal of Applied Physics,
94
(2003),
3;
S. 1539
- 1549.
Zusätzliche Informationen
-
D. Duschlbauer, H. E. Pettermann, H. J. Böhm:
"Mori-Tanaka Based Evaluation of Inclusion Stresses in Composites with Nonaligned Reinforcements";
Scripta Materialia,
48
(2003),
3;
S. 223
- 228.
Zusätzliche Informationen
-
J. Eberhardsteiner, H. J. Böhm, F. G. Rammerstorfer, H.A. Mang, M. Pöll:
"ECCOMAS 2012 - Sixth European Congress on Computational Methods in Applied Sciences and Engineering";
Computer Assisted Methods in Engineering and Science,
19
(2012),
S. 305
- 308.
-
J. Eberhardsteiner, H.A. Mang, F. G. Rammerstorfer:
"Preface: Special Issue on The Fifth World Congress on Computational Mechanics";
International Journal for Numerical Methods in Engineering,
60
(2004),
1;
S. 1
- 2.
-
A. Eckschlager, H. J. Böhm, W. Han:
"A Unit Cell Model for Brittle Fracture of Particles Embedded in a Ductile Matrix";
Computational Materials Science,
25
(2002),
S. 85
- 91.
Zusätzliche Informationen
-
S.-J. Estermann, S. Förster-Streffleur, L. Hirtler, J Streicher, D. H. Pahr, A.G. Reisinger:
"Comparison of Thiel preserved, fresh human, and animal liver tissue in terms of mechanical properties";
Annals of Anatomy - Anatomischer Anzeiger,
236
(2021),
151717;
S. 1
- 10.
-
S.-J. Estermann, D. H. Pahr, A.G. Reisinger:
"Hyperelastic and viscoelastic characterization of hepatic tissue under uniaxial tension in time and frequency domain";
Journal of the Mechanical Behavior of Biomedical Materials,
112
(2020),
104038.
-
S.-J. Estermann, D. H. Pahr, A.G. Reisinger:
"Material design of soft biological tissue replicas using viscoelastic micromechanical modelling";
Journal of the Mechanical Behavior of Biomedical Materials,
125
(2022),
104875;
S. 1
- 11.
-
S.-J. Estermann, D. H. Pahr, A.G. Reisinger:
"Quantifying tactile properties of liver tissue, silicone elastomers, and a 3D printed polymer for manufacturing realistic organ models";
Journal of the Mechanical Behavior of Biomedical Materials,
104
(2020),
103630.
-
S. Faghfouri, F. G. Rammerstorfer:
"Mode transitions in buckling and post-buckling of stretched-twisted strips";
International Journal of Non-Linear Mechanics,
127
(2020),
103609.
-
P. Farahmand, F. Marin, F. Hawkins, R. Möricke, J.D. Ringe, C.C. Glüer, N. Papaioannu, S. Minisola, G. Martínez, J.M. Nolla, C. Niedhart, N. Guañabens, R. Nuti, E. Martín-Mola, F. Thomasius, J. Peña, C. Graeff, G. Kapetanos, H. Petto, A. Gentzel, A.G. Reisinger, P.K. Zysset:
"Early Changes in Biochemical Markers of Bone Formation During Teriparatide Therapy Correlate with Improvements in Vertebral Strength in Men with Glucocorticoid-Induced Osteoporosis";
Osteoporosis International,
24
(2013),
12;
S. 2971
- 2981.
Zusätzliche Informationen
-
G. Feigl, F.D. Fischer, K.L. Maurer, F. G. Rammerstorfer:
"Bruchmechanik-Empfehlungen der Arbeitsgruppe `Bruchmechanik des Österr.Stahlbauverbandes (ÖSTV)";
ÖIAZ,
137
(1992),
6;
S. 257
- 258.
-
G. Feigl, F.D. Fischer, K.L. Maurer, F. G. Rammerstorfer:
"Bruchmechanik-Empfehlungen der Arbeitsgruppe `Bruchmechanik des Österr.Stahlbauverbandes (ÖSTV)";
ÖIAZ,
137
(1992),
6;
S. 257
- 258.
-
F.D. Fischer, H. J. Böhm:
"On the Role of the Transformation Eigenstrain on the Growth or Shrinkage of Spheroidal Isotropic Precipitates";
Acta Materialia,
53
(2005),
2;
S. 367
- 374.
Zusätzliche Informationen
-
F.D. Fischer, H. J. Böhm, E.R. Oberaigner, T. Waitz:
"The Role of Elastic Contrast on the Strain Energy and the Stress State of a Spheroidal Inclusion with a General Eigenstrain State";
Acta Materialia,
54
(2006),
1;
S. 151
- 156.
Zusätzliche Informationen
-
F.D. Fischer, N. Friedl, A. Noé, F. G. Rammerstorfer:
"A Study of the Buckling Behaviour of Strips and Plates with Residual Stress";
Steel Research International,
76
(2005),
4;
S. 327
- 335.
Zusätzliche Informationen
-
F.D. Fischer, E. Hinteregger, F. G. Rammerstorfer:
"Numerische Simulation einer experimentellen Spannungsermittlung nach dem Bohrlochverfahren und Vergleich mit den rechnerisch ursprünglich vorhandenen Spannungen";
Materialprüfung,
32
(1990),
6;
S. 181
- 185.
-
F.D. Fischer, O. Kolednik, G.X. Shan, F. G. Rammerstorfer:
"A Note on Calibration of Ductile Failure Damage Indicators";
International Journal of Fracture,
73
(1995),
4;
S. 354
- 375.
Zusätzliche Informationen
-
F.D. Fischer, F. G. Rammerstorfer:
"A Note on a Simple Recategorisation of Cracks in Fatigue Analysis";
Engineering Fracture Mechanics,
66
(2000),
1;
S. 41
- 49.
Zusätzliche Informationen
-
F.D. Fischer, F. G. Rammerstorfer:
"A Refined Analysis of Sloshing Effects in Seismically Excited Tanks";
International Journal of Pressure Vessels and Piping,
76
(1999),
S. 693
- 709.
Zusätzliche Informationen
-
F.D. Fischer, F. G. Rammerstorfer:
"Berechnung von thermomechanischen Vorgängen bei der Wärmebehandlung von Stahlkörpern";
Schweizer Ingenieur und Architekt,
18
(1983),
S. 479
- 484.
-
F.D. Fischer, F. G. Rammerstorfer:
"Comments to the paper 'Seismic Analysis of Liquid Storage Tanks' by G.S.Leon and E.A.M.Kausel";
Journal of Structural Engineering,
113
(1988),
S. 2324
- 2326.
-
F.D. Fischer, F. G. Rammerstorfer:
"Mode-I Crack Projection Procedure Using the Strain Energy Density Criterion";
Theoretical and Applied Fracture Mechanics,
20
(1994),
S. 67
- 74.
-
F.D. Fischer, F. G. Rammerstorfer, W. Auli:
"Erdbebenbeanspruchte Tankbauwerke - gelöste und ungelöste Probleme";
ÖIAZ,
131
(1986),
S. 140
- 141.
-
F.D. Fischer, F. G. Rammerstorfer, F.J. Bauer:
"Fatigue and Fracture of High-Alloyed Steel Specimens Subjected to Purely Thermal Cycling";
Metallurgical Transaction A,
21A
(1990),
S. 935
- 948.
Zusätzliche Informationen
-
F.D. Fischer, F. G. Rammerstorfer, T. Daxner:
"Flaring - An Analytical Approach";
International Journal of Mechanical Sciences,
48
(2006),
11;
S. 1246
- 1255.
Zusätzliche Informationen
-
F.D. Fischer, F. G. Rammerstorfer, N. Friedl:
"Residual Stress-Induced Center Wave Buckling of Rolled Strip Metal";
Journal of Applied Mechanics - Transactions of the ASME,
70
(2003),
S. 84
- 90.
Zusätzliche Informationen
-
F.D. Fischer, F. G. Rammerstorfer, N. Friedl, W. Wieser:
"Buckling Phenomena Related to Rolling and Levelling of Sheet Metal";
International Journal of Mechanical Sciences,
42
(2000),
10;
S. 1887
- 1910.
Zusätzliche Informationen
-
F.D. Fischer, F. G. Rammerstorfer, W. Schreiner:
"The Extensible Uplifting Strip";
Acta Mechanica,
80
(1989),
3-4;
S. 227
- 257.
Zusätzliche Informationen
-
J. Flaquer, A. Ríos, A. Martín-Meizoso, S. Nogales, H. J. Böhm:
"Effect of Diamond Shapes and Associated Thermal Boundary Resistance on Thermal Conductivity of Diamond-Based Composites";
Computational Materials Science,
41
(2007),
2;
S. 156
- 163.
Zusätzliche Informationen
-
T. Flatscher, H. E. Pettermann:
"A Constitutive Model for Fiber-Reinforced Polymer Plies Accounting for Plasticity and Brittle Damage Including Softening - Implementation for Implicit FEM";
Composite Structures,
93
(2011),
9;
S. 2241
- 2249.
Zusätzliche Informationen
-
T. Flatscher, C. Schuecker, H. E. Pettermann:
"A Constitutive Model for Continuous Fiber Reinforced Polymer Plies";
PAMM,
9
(2009),
S. 23
- 26.
Zusätzliche Informationen
-
T. Flatscher, C. Schuecker, H. E. Pettermann:
"A Constitutive Ply Model for Stiffness Degradation and Plastic Strain Accumulation: Its Application to the Third World Wide Failure Exercise (Part A)";
Journal of Composite Materials,
47
(2013),
S. 2575
- 2593.
Zusätzliche Informationen
-
T. Flatscher, C. Schuecker, H. E. Pettermann:
"Prediction of Plastic Strain Accumulation in Continuous Fiber Reinforced Laminates by a Constitutive Ply Model";
International Journal of Fracture,
158
(2009),
2;
S. 145
- 156.
Zusätzliche Informationen
-
T. Flatscher, M. Wolfahrt, G. Pinter, H. E. Pettermann:
"Simulations and Experiments of Open Hole Tension Tests - Assessement of Intra-Ply Plasticity, Damage and Localization";
Composites Science and Technology,
72
(2012),
10;
S. 1090
- 1095.
Zusätzliche Informationen
-
M. Frank, J.T. Fischer, P.J. Thurner:
"Microdamage formation in individual bovine trabeculae during fatigue testing";
Journal of Biomechanics,
115
(2021),
110131;
S. 1.
-
M. Frank, A. Grabos, A.G. Reisinger, D. B. Burr, D. H. Pahr, M. Allen, P.J. Thurner:
"Effects of anti-resorptive treatment on the material properties of individual canine trabeculae in cyclic tensile tests";
Bone,
150
(2021),
115995;
S. 1
- 10.
-
M. Frank, D. Marx, V. Nedelkovski, J.T. Fischer, D. H. Pahr, P.J. Thurner:
"Dehydration of individual bovine trabeculae causes transition from ductile to quasi-brittle failure mode";
Journal of the Mechanical Behavior of Biomedical Materials,
87
(2018),
S. 296
- 305.
Zusätzliche Informationen
-
M. Frank, A.G. Reisinger, D. H. Pahr, P.J. Thurner:
"Effects of Osteoporosis on Bone Morphometry and Material Properties of Individual Human Trabeculae in the Femoral Head";
JBMR Plus,
5
(2021),
e10503;
14 S.
-
G. Franzoso, P.K. Zysset:
"Elastic Anisotropy of Human Cortical Bone Secondary Osteons Measured by Nanoindentation";
Journal of Biomechanical Engineering - Transactions of the ASME,
131
(2009),
2;
S. 021001-1
- 021001-11.
Zusätzliche Informationen
-
N. Friedl, F. G. Rammerstorfer, F.D. Fischer:
"Buckling of stretched strips";
Computers and Structures,
78
(2000),
1-3;
S. 185
- 190.
Zusätzliche Informationen
-
N. Friedl, F. G. Rammerstorfer, F.D. Fischer:
"Zum Beulen von Platten unter globalem Zug";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik,
79
(1999),
Supplement 2;
S. 545
- 546.
-
J. Gager, H. E. Pettermann:
"FEM Modeling of Multilayered Textile Composites Based on Shell Elements";
Composites - Part B: Engineering,
77
(2015),
S. 46
- 51.
Zusätzliche Informationen
-
J. Gager, H. E. Pettermann:
"Numerical Homogenization of Textile Composites Based on Shell Element Discretization";
Composites Science and Technology,
72
(2012),
7;
S. 806
- 812.
Zusätzliche Informationen
-
D. Garcia, P.K. Zysset, M. Charlebois, A. Curnier:
"A 1D Elastic Plastic Damage Constitutive Law for Bone Tissue";
Archive of Applied Mechanics,
80
(2010),
5;
S. 543
- 555.
Zusätzliche Informationen
-
D. Garcia, P.K. Zysset, M. Charlebois, A. Curnier:
"A Three-Dimensional Elastic Plastic Damage Constitutive Law for Bone Tissue";
Biomechanics and Modeling in Mechanobiology,
8
(2009),
2;
S. 149
- 165.
Zusätzliche Informationen
-
L. Georgiou, Ch. J. Dunmore, A. Bardo, L.T. Buck, J. Hublin, D. H. Pahr, D. Stratford, A. Synek, T.L. Kivell, M.M. Skinner:
"Evidence for habitual climbing in a Pleistocene hominin in South Africa";
PNAS - Proceedings of the National Academy of Sciences of the United States of America,
117
(2020),
S. 8416
- 8423.
-
L. Georgiou, T.L. Kivell, D. H. Pahr, L.T. Buck, M.M. Skinner:
"Trabecular architecture of the great ape and human femoral head";
Journal of Anatomy,
234
(2019),
5;
S. 679
- 693.
-
C.C. Glüer, F. Marin, J.D. Ringe, F. Hawkins, R. Möricke, N. Papaioannu, P. Farahmand, S. Minisola, G. Martínez, J.M. Nolla, C. Niedhart, N. Guañabens, R. Nuti, E. Martín-Mola, F. Thomasius, G. Kapetanos, J. Peña, C. Graeff, H. Petto, B. Sanz, A.G. Reisinger, P.K. Zysset:
"Comparative Effects of Teriparatide and Risedronate in Glucocorticoid-Induced Osteoporosis in Men: 18-Month Results of the EuroGIOPs Trial";
Journal of Bone and Mineral Research,
28
(2013),
6;
S. 1355
- 1368.
Zusätzliche Informationen
-
M. Golman, A. C. Abraham, I. Kurtaliaj, B. P. Marshall, Y. J. Hu, A. G. Schwartz, X.E. Guo, V. Birman, P.J. Thurner, G. M. Genin, S. Thomopoulos:
"Toughening mechanisms for the attachment of architectured materials: The mechanics of the tendon enthesis";
Science Advances,
7
(2021),
eabi5584;
13 S.
-
J.B. Gracia, F. G. Rammerstorfer:
"Increase in buckling loads of plates by introduction of cutouts";
Acta Mechanica,
230
(2019),
8;
S. 2873
- 2889.
Zusätzliche Informationen
-
R. Gradinger, F. G. Rammerstorfer:
"On the Influence of Meso-Inhomogeneities on the Crush-Worthiness of Metal Foams";
Acta Materialia,
47
(1999),
1;
S. 143
- 148.
Zusätzliche Informationen
-
C. Graeff, Y. Chevalier, M. Charlebois, P. Varga, D. H. Pahr, T.N. Nickelsen, C.C. Glüer, P.K. Zysset:
"70 Teriparatide Reduces the Size of Regions at High Risk of Failure as Assessed by Non-Linear FE Analysis In Vivo";
Journal of Clinical Densitometry,
12
(2009),
1;
S. 120
- 121.
-
C. Graeff, Y. Chevalier, M. Charlebois, P. Varga, D. H. Pahr, T.N. Nickelsen, M.M. Morlock, C.C. Glüer, P.K. Zysset:
"Improvements in Vertebral Body Strength Under Teriparatide Treatment Assessed In Vivo by Finite Element Analysis: Results From the EUROFORS Study";
Journal of Bone and Mineral Research,
24
(2009),
10;
S. 1672
- 1680.
Zusätzliche Informationen
-
C. Graeff, F. Marin, H. Petto, O. Kayser, A.G. Reisinger, J. Peña, P.K. Zysset, C.C. Glüer:
"High-Resolution Quantitative Computed Tomography-Based Assessment of Trabecular Microstructure and Strength Estimates by Finite-Element Analysis of the Spine, but not DXA, Reflects Vertebral Fracture Status in Men with Glucocorticoid-Induced Osteoporosis";
Bone,
52
(2013),
2;
S. 568
- 577.
Zusätzliche Informationen
-
T. Gross, T.L. Kivell, M.M. Skinner, H.N. Nguyen, D. H. Pahr:
"A CT-Image-Based Framework for the Holistic Analysis of Cortical and Trabecular Bone Morphology";
Palaeontologia Electronica,
17
(2014),
3;
13 S.
Zusätzliche Informationen
-
T. Gross, D. H. Pahr, F. Peyrin, P.K. Zysset:
"Mineral Heterogeneity has a Minor Influence on the Apparent Elastic Properties of Human Cancellous Bone: A SRμCT-Based Finite Element Study";
Computer Methods in Biomechanics and Biomedical Engineering,
15
(2012),
11;
S. 1137
- 1144.
Zusätzliche Informationen
-
T. Gross, D. H. Pahr, P.K. Zysset:
"Morphology-Elasticity Relationships Using Decreasing Fabric Information of Human Trabecular Bone from Three Major Anatomical Locations";
Biomechanics and Modeling in Mechanobiology,
12
(2013),
4;
S. 793
- 800.
Zusätzliche Informationen
-
R. Grossmayer, F. G. Rammerstorfer, F. Ziegler:
"Untersuchung des Verhaltens von Bauwerken bei Erdbebenerregung - Modellversuche";
Österreichische Ingenieur-Zeitschrift (ÖIZ),
22
(1979),
1;
S. 15
- 22.
-
G. Haïat, F. Padilla, M. Svrcekova, Y. Chevalier, D. H. Pahr, F. Peyrin, P. Laugier, P.K. Zysset:
"Relationship between Ultrasonic Parameters and Apparent Trabecular Bone Elastic Modulus: A Numerical Approach";
Journal of Biomechanics,
42
(2009),
13;
S. 2033
- 2039.
Zusätzliche Informationen
-
W. Han, A. Eckschlager, H. J. Böhm:
"The Effects of Three-Dimensional Multi-Particle Arrangements on the Mechanical Behavior and Damage Initiation of Particle-Reinforced MMCs";
Composites Science and Technology,
61
(2001),
11;
S. 1581
- 1590.
Zusätzliche Informationen
-
M.A. Hartmann, M. Todt, F. G. Rammerstorfer, F.D. Fischer, O. Paris:
"Elastic Properties of Graphene Obtained by Computational Mechanical Tests";
EPL (Europhysics Letters),
103
(2013),
S. 68004.
Zusätzliche Informationen
-
J. Helmig, F. Key, M. Behr, S. Elgeti:
"Combining boundary-conforming finite element meshes on moving domains using a sliding mesh approach";
International Journal for Numerical Methods in Fluids,
93
(2021),
S. 1053
- 1073.
-
S. Hengsberger, P. Ammann, B. Legros, R. Rizzoli, P.K. Zysset:
"Intrinsic Bone Tissue Properties in Adult Rat Vertebrae: Modulation by Dietary Protein";
Bone,
36
(2005),
1;
S. 134
- 141.
Zusätzliche Informationen
-
E. Hinteregger, F.D. Fischer, F. G. Rammerstorfer:
"Berechnung der Längseigenspannungen langer Schienen während des Abkühlens";
Berg- und Hüttenmännische Monatshefte (BHM),
135
(1990),
S. 437
- 442.
-
B. Hößl, H. J. Böhm, F. G. Rammerstorfer, F.G. Barth:
"Finite Element Modeling of Arachnid Slit Sensilla - I. The Mechanical Significance of Different Slit Arrays";
Journal of Comparative Physiology A,
193
(2007),
4;
S. 445
- 459.
Zusätzliche Informationen
-
B. Hößl, H. J. Böhm, F. G. Rammerstorfer, R. Müllan, F.G. Barth:
"Studying Arachnid Slit Sensilla by a Fracture Mechanical Approach: Kachanov's Method and Slit Face Displacements";
Journal of Biomechanics,
39
(2006),
10;
S. 1761
- 1768.
Zusätzliche Informationen
-
B. Hößl, H. J. Böhm, C.F. Schaber, F. G. Rammerstorfer, F.G. Barth:
"Finite Element Modeling of Arachnid Slit Sensilla: II. Actual Lyriform Organs and the Face Deformations of the Individual Slits";
Journal of Comparative Physiology A,
195
(2009),
9;
S. 881
- 894.
Zusätzliche Informationen
-
C.E. Hoffler, X.E. Guo, P.K. Zysset, S.A. Goldstein:
"An Application of Nanoindentation Technique to Measure Bone Tissue Lamellae Properties";
Journal of Biomechanical Engineering - Transactions of the ASME,
127
(2005),
7;
S. 1046
- 1053.
Zusätzliche Informationen
-
P. Hoffmann, S. Moser, C. Kofler, M. Nelhiebel, D. Tscharnuter, B. Karunamurthy, H. E. Pettermann, M. Todt:
"Thermomechanical fatigue damage modeling and material parameter calibration for thin film metallizations";
International Journal of Fatigue,
155
(2022),
S. 106627.
-
K. Hofwimmer, T.J. Reiter, G. Staudinger:
"FE-Modell eines LD-Konverters mit gemauerter MgO/C-Feuerfestauskleidung";
Berg- und Hüttenmännische Monatshefte (BHM),
145
(2000),
3;
S. 93
- 102.
Zusätzliche Informationen
-
D. Holec, M.A. Hartmann, F.D. Fischer, F. G. Rammerstorfer, P.H. Mayrhofer, O. Paris:
"Curvature-Induced Excess Surface Energy of Fullerenes: Density Functional Theory and Monte Carlo Simulations";
Physical Review B,
81
(2010),
23; 235403.
Zusätzliche Informationen
-
H.S. Hosseini, A. Dünki, J. Fabech, M. Stauber, N. Vilayphiou, D. H. Pahr, M. Pretterklieber, J. Wandel, B. van Rietbergen, P.K. Zysset:
"Fast Estimation of Colles' Fracture Load of the Distal Section of the Radius by Homogenized Finite Element Analysis Based on HR-pQCT";
Bone,
97
(2017),
S. 65
- 75.
Zusätzliche Informationen
-
H.S. Hosseini, D. H. Pahr, P.K. Zysset:
"Modeling and Experimental Validation of Trabecular Bone Damage, Softening and Densification under Large Compressive Strains";
Journal of the Mechanical Behavior of Biomedical Materials,
15
(2012),
S. 93
- 102.
Zusätzliche Informationen
-
S. Hube, M. Behr, S. Elgeti, M. Schön, J. Sasse, C. Hopmann:
"Numerical Design of Distributive Mixing Elements";
Finite Elements in Analysis and Design,
204
(2022),
103733;
S. 1
- 10.
-
G. Iori, Peralta Peralta, A.G. Reisinger, F. Heyer, C. Wyers, J. van den Bergh, D. Pahr, K. Raum:
"Femur strength predictions by nonlinear homogenized voxel finite element models reflect the microarchitecture of the femoral neck";
Medical Engineering & Physics,
79
(2020),
S. 60
- 66.
-
G. Iori, J. Schneider, A.G. Reisinger, F. Heyer, Peralta Peralta, C. Wyers, C.C. Glüer, J. van den Bergh, D. Pahr, K. Raum:
"Cortical thinning and accumulation of large cortical pores in the tibia reflect local structural deterioration of the femoral neck";
Bone,
137
(2020),
115446.
-
G. Iori, J. Schneider, A.G. Reisinger, F. Heyer, Peralta Peralta, C. Wyers, M. Gräsel, R. Barkmann, C.C. Glüer, J. van den Bergh, D. Pahr, K. Raum:
"Large cortical bone pores in the tibia are associated with proximal femur strength";
PLoS ONE,
14
(2019),
e0215405;
18 S.
-
L. Jaksa, D. Pahr, G. Kronreif, A. Lorenz:
"Development of a Multi-Material 3D Printer for Functional Anatomic Models";
International Journal of Bioprinting,
7
(2021),
S. 145
- 155.
-
T. Jenkins, L.V. Coutts, D. G. Dunlop, R.O.C. Oreffo, C. Cooper, N.C. Harvey, P.J. Thurner:
"Variability in Reference Point Microindentation and Recommendations for Testing Cortical Bone: Maximum Load, Sample Orientation, Mode of Use, Sample Preparation and Measurement Spacing";
Journal of the Mechanical Behavior of Biomedical Materials,
42
(2015),
S. 311
- 324.
Zusätzliche Informationen
-
T. Jenkins, L.V. Coutts, S. D´Angelo, D. G. Dunlop, R.O.C. Oreffo, C. Cooper, N.C. Harvey, P.J. Thurner:
"Site-Dependent Reference Point Microindentation Complements Clinical Measures for Improved Fracture Risk Assessment at the Human Femoral Neck";
Journal of Bone and Mineral Research,
31
(2016),
1;
S. 196
- 203.
Zusätzliche Informationen
-
T. Jenkins, O.L. Katsamenis, O.G. Andriotis, L.V. Coutts, B. Carter, D. G. Dunlop, R.O.C. Oreffo, C. Cooper, N.C. Harvey, P.J. Thurner:
"The Inferomedial Femoral Neck is Compromised by Age but not Disease: Fracture Toughness and the Multifactorial Mechanisms Comprising Reference Point Microindentation";
Journal of the Mechanical Behavior of Biomedical Materials,
75
(2017),
S. 399
- 412.
Zusätzliche Informationen
-
V. Jeyakumar, N. Amraish, E.-P. Niculescu-Morzsa, C. Bauer, D. H. Pahr, S. Nehrer:
"Decellularized Cartilage Extracellular Matrix Incorporated Silk Fibroin Hybrid Scaffolds for Endochondral Ossification Mediated Bone Regeneration";
International Journal of Molecular Sciences,
22
(2021),
4055;
S. 1
- 14.
-
M.G. Jones, O.G. Andriotis, J.J.W. Roberts, K. Lunn, V.J. Tear, L. Cao, K. Ask, D.E. Smart, A. Bonfanti, P. Johnson, A. Alzetani, F. Conforti, R. Doherty, C.Y. Lai, B. Johnson, K.N. Bourdakos, S.V. Fletcher, B.G. Marshall, S. Jogai, C.J. Brereton, S.J. Chee, C. Ottensmeier, P. Sime, J. Gauldie, M. Kolb, S. Mahajan, A. Fabre, A. Bhaskar, W. Jarolimek, L. Richeldi, K.M.A. O´Reilly, P.D. Monk, P.J. Thurner, D.E. Davies et al.:
"Nanoscale dysregulation of collagen structure-function disrupts mechano-homeostasis and mediates pulmonary fibrosis";
ELIFE,
7
(2018),
e36354;
24 S.
-
J. Jurkowitsch, E. Dall´Ara, S. Quadlbauer, C. Pezzei, I. Jung, D. H. Pahr, M. Leixnering:
"Rotational Stability in Screw-Fixed Scaphoid Fractures Compared to Plate-Fixed Scaphoid Fractures";
Archives of Orthopaedic and Trauma Surgery,
136
(2016),
11;
S. 1623
- 1628.
Zusätzliche Informationen
-
L. Kain, O.G. Andriotis, P. Gruber, M. Frank, M. Markovic, D. Grech, V. Nedelkovski, M. Stolz, A. Ovsianikov, P.J. Thurner:
"Calibration of colloidal probes with atomic force microscopy for micromechanical assessment";
Journal of the Mechanical Behavior of Biomedical Materials,
85
(2018),
S. 225
- 236.
Zusätzliche Informationen
-
H. Kainz, E. Dall´Ara, A. Antoni, H. Redl, P.K. Zysset, P. Weninger:
"Calcium Phosphate Cement Augmentation after Volar Locking Plating of Distal Radius Fracture Significantly Increases Stability";
European Journal of Orthopaedic Surgery and Traumatology,
24
(2014),
S. 869
- 875.
Zusätzliche Informationen
-
C. Karavasili, O.L. Katsamenis, N. Bouropoulos, H. Nazar, P.J. Thurner, S.M. van der Merwe, D.G. Fatouros:
"Table of Contents Preparation and Characterization of Bioadhesive Microparticles Comprised of Low Degree of Quaternization Trimethylated Chitosan for Nasal Administration: Effect of Concentration and Molecular Weight";
Langmuir,
30
(2014),
41;
S. 12337
- 12344.
Zusätzliche Informationen
-
O.L. Katsamenis, T. Jenkins, P.J. Thurner:
"Toughness and Damage Susceptibility in Human Cortical Bone is Proportional to Mechanical Inhomogeneity at the Osteonal-Level";
Bone,
76
(2015),
S. 158
- 168.
Zusätzliche Informationen
-
J. Kaul, H. E. Pettermann:
"A constitutive model for fiber reinforced polymer plies - Implicit anisotropic evolution of damage and plasticity based on effective strengths";
Composites Part C: Open Access,
4
(2021),
S. 100097.
-
M.E. Kersh, P.K. Zysset, D. H. Pahr, U. Wolfram, D. Larsson, MG Pandy:
"Measurement of Structrual Anisotropy in Femoral Trabecular Bone Using Clinical-Resolution CT Images";
Journal of Biomechanics,
46
(2013),
15;
S. 2659
- 2666.
Zusätzliche Informationen
-
F. Key, F. Ballarin, S. Eusterholz, S. Elgeti, G. Rozza:
"Reduced Flow Model for Plastics Melt Inside an Extrusion Die";
PAMM,
21
(2021),
e202100071;
2 S.
-
M. Kinzl, L. Benneker, A. Boger, P.K. Zysset, D. H. Pahr:
"The Effect of Standard and Low-Modulus Cement Augmentation on the Stiffness, Strength, and Endplate Pressure Distribution in Vertebroplasty";
European Spine Journal,
21
(2012),
5;
S. 920
- 929.
Zusätzliche Informationen
-
M. Kinzl, A. Boger, P.K. Zysset, D. H. Pahr:
"The Effects of bone and Pore Volume Fraction on the Mechanical Properties of PMMA/Bone Biopsies Extracted from Augmented Vertebrae";
Journal of Biomechanics,
44
(2011),
15;
S. 2732
- 2736.
Zusätzliche Informationen
-
M. Kinzl, A. Boger, P.K. Zysset, D. H. Pahr:
"The Mechanical Behavior of PMMA/Bone Specimens Extracted from Augmented Vertebrae: A Numerical Study of Interface Properties, PMMA Shrinkage and Trabecular Bone Damage";
Journal of Biomechanics,
45
(2012),
8;
S. 1478
- 1484.
Zusätzliche Informationen
-
M. Kinzl, J.J. Schwiedrzik, P.K. Zysset, D. H. Pahr:
"An Experimentally Validated Finite Element Method for Augmented Vertebral Bodies";
Clinical Biomechanics,
28
(2013),
1;
S. 15
- 22.
Zusätzliche Informationen
-
M. Kinzl, U. Wolfram, D. H. Pahr:
"Identification of a Crushable Foam Material Model and Application to Strength and Damage Prediction of Human Femur and Vertebral Body";
Biomedical Materials,
26
(2013),
S. 136
- 147.
Zusätzliche Informationen
-
C. Kirchlechner, F. Toth, F. G. Rammerstorfer, F.D. Fischer, G. Dehm:
"Pre- and Post-Buckling Behavior of Bi-Crystalline Micropillars: Origin and Consequences";
Acta Materialia,
124
(2017),
S. 195
- 203.
Zusätzliche Informationen
-
E. Klintström, B. Klintström, R. Moreno, T.B. Brismar, D. H. Pahr, ö. Smedby:
"Predicting Trabecular Bone Stiffness from Clinical Cone-Beam CT and HR-pQCT Data; an In Vitro Study Using Finite Element Analysis";
PLoS ONE,
11
(2016),
8:e0161101;
19 S.
Zusätzliche Informationen
-
E. Klintström, B. Klintström, D. H. Pahr, T.B. Brismar, ö. Smedby, R. Moreno:
"Direct Estimation of Human Trabecular Bone Stiffness Using Cone Beam Computed Tomography";
Oral Surgery, Oral Medicine, Oral Pathology and Oral Radiology,
126
(2018),
1;
S. 72
- 82.
Zusätzliche Informationen
-
D. Kluess, E. Soodmand, A. Lorenz, D. Pahr, M. Schwarze, R. Cichon, P. Varady, S. Herrmann, B. Buchmeier, C. Schröder, S. Lehner, M. Kebbach:
"A round-robin finite element analysis of human femur mechanics between seven participating laboratories with experimental validation";
Computer Methods in Biomechanics and Biomedical Engineering,
22
(2019),
12;
S. 1020
- 1031.
-
B. Klusemann, H. J. Böhm, B. Svendsen:
"Homogenization Methods for Multi-Phase Elastic Composites with Non-Elliptical Reinfocements: Comparisons and Benchmarks";
European Journal of Mechanics - A/Solids,
34
(2012),
S. 21
- 37.
Zusätzliche Informationen
-
A. Köllner, M. Todt, G. Ganzosch, C. Völlmecke:
"Experimental and numerical investigation on pre-stressed lattice structures";
Thin-Walled Structures,
145
(2019),
106396;
S. 1
- 9.
-
W. Krach, T.J. Reiter, F. G. Rammerstorfer:
"Computerunterstützte Vorhersage des Knochenumbaus am Beispiel von Knieendoprothesen";
Biomedizinische Technik,
40
(1995),
E2;
S. 78
- 80.
-
D. Kuksenko, H. J. Böhm, B. Drach:
"Effect of Micromechanical Parameters of Composites with Wavy Fibers on their Effective Response under Large Deformations";
Advances in Engineering Software,
121
(2018),
S. 206
- 222.
Zusätzliche Informationen
-
D. Larsson, B. Luisier, M.E. Kersh, E. Dall´Ara, P.K. Zysset, MG Pandy, D. H. Pahr:
"Assessment of Transverse Isotropy in Clinical-Level CT Images of Trabecular Bone Using the Gradient Structure Tensor";
Annals of Biomedical Engineering,
42
(2014),
5;
S. 950
- 959.
Zusätzliche Informationen
-
A. Latypova, G. Maquer, K. Elankumaran, P.K. Zysset, D.P. Pioletti, A. Terrier:
"Identification of Elastic Properties of Human Patellae Using Micro-Finite Element Analysis";
Journal of Biomechanics,
49
(2016),
13;
S. 3111
- 3115.
Zusätzliche Informationen
-
S. Li, P Glynne-Jones, O.G. Andriotis, K.Y. Ching, U.S. Jonnalagadda, R.O.C. Oreffo, M. Hill, Rahul S. Tare:
"Application of an Acoustofluidic Perfusion Bioreactor for Cartilage Tissue Engineering";
Lab on a Chip,
14
(2014),
23;
S. 4475
- 4485.
Zusätzliche Informationen
-
S.C. Lu, E.E. Vereecke, A. Synek, D. H. Pahr, T.L. Kivell:
"A novel experimental design for the measurement of metacarpal bone loading and deformation and fingertip force";
PeerJ,
6
(2018),
e5480;
19 S.
-
B. Luisier, E. Dall´Ara, D. H. Pahr:
"Orthotropic HR-pQCT-Based FE Models Improve Strength Predictions for Stance but not for Side-Way Fall Loading Compared to Isotropic QCT-Based FE Models of Human Femurs";
Journal of the Mechanical Behavior of Biomedical Materials,
32
(2014),
S. 287
- 299.
Zusätzliche Informationen
-
M. Lunzer, L. Shi, O.G. Andriotis, P. Gruber, M. Markovic, P.J. Thurner, D. Ossipov, R. Liska, A. Ovsianikov:
"A Modular Approach to Sensitized Two-Photon Patterning of Photodegradable Hydrogels";
Angewandte Chemie,
130
(2018),
46;
S. 15342
- 15347.
Zusätzliche Informationen
-
M. Lunzer, L. Shi, O.G. Andriotis, P. Gruber, M. Markovic, P.J. Thurner, D. Ossipov, R. Liska, A. Ovsianikov:
"A Modular Approach to Sensitized Two-Photon Patterning of Photodegradable Hydrogels";
Angewandte Chemie International Edition,
57
(2018),
46;
S. 15122
- 15127.
Zusätzliche Informationen
-
M.H. Luxner, T. Daxner, F. G. Rammerstorfer:
"Optimization of Mechanically Coupled Composite Pipes by Genetic Algorithms";
Proceedings in Applied Mathematics and Mechanics,
4
(2004),
1;
S. 620
- 621.
Zusätzliche Informationen
-
M.H. Luxner, J. Stampfl, H. E. Pettermann:
"Finite Element Modeling Concepts and Linear Analyses of 3D Regular Open Cell Structures";
Journal of Materials Science,
40
(2005),
22;
S. 5859
- 5866.
Zusätzliche Informationen
-
M.H. Luxner, J. Stampfl, H. E. Pettermann:
"Nonlinear Simulations on the Interaction of Disorder and Defects in Open Cell Structures";
Computational Materials Science,
47
(2009),
2;
S. 418
- 428.
Zusätzliche Informationen
-
M.H. Luxner, J. Stampfl, H. E. Pettermann:
"Numerical simulations of 3D open cell structures - Influence of structural irregularities on elasto-plasticity and deformation localization";
International Journal of Solids and Structures,
44
(2007),
S. 2990
- 3003.
Zusätzliche Informationen
-
M.H. Luxner, A. Woesz, J. Stampfl, P. Fratzl, H. E. Pettermann:
"A Finite Element Study on the Effects of Disorder in Cellular Structures";
Acta Biomaterialia,
5
(2009),
S. 381
- 390.
Zusätzliche Informationen
-
G. Mailath-Pokorny, H. E. Pettermann, H. J. Böhm, D. Scheidle, W. Lill, G. Watzek:
"Zur Biomechanik der transdentalen Fixation";
Zeitschrift für zahnärztliche Implantologie,
7
(1991),
S. 138
- 143.
-
G. Maquer, E. Dall´Ara, P.K. Zysset:
"Removal of the Cortical Endplates has Little Effect on Ultimate Load and Damage Distribution in QCT-Based Voxel Models of Human Lumbar Vertebrae under Axial Compression";
Journal of Biomechanics,
45
(2012),
9;
S. 1733
- 1738.
Zusätzliche Informationen
-
G. Maquer, S.N. Musy, J. Wandel, T. Gross, P.K. Zysset:
"Bone Volume Fraction and Fabric Anisotropy Are Better Determinants of Trabecular Bone Stiffness Than Other Morphological Variables";
Journal of Bone and Mineral Research,
30
(2015),
6;
S. 1000
- 1008.
Zusätzliche Informationen
-
L.J. Martikainen, F. G. Rammerstorfer:
"Modelling the Local Failure Modes in Thin-Faced Sandwich Panels";
Strojnícky Casopis (Journal of Mechanical Engineering),
50
(1999),
S. 241
- 252.
-
V.M. Marx, F. Toth, A. Wiesinger, J. Berger, C. Kirchlechner, M.J. Cordill, F.D. Fischer, F. G. Rammerstorfer, G. Dehm:
"The Influence of a Brittle Cr Interlayer on the Deformation Behavior of thin Cu Films on Flexible Substrates: Experiment and Model";
Acta Materialia,
89
(2015),
S. 278
- 289.
Zusätzliche Informationen
-
M. Matsuura, F. Eckstein, E.M. Lochmüller, P.K. Zysset:
"The Role of Fabric in the Quasi-Static Compressive Mechanical Properties of Human Trabecular Bone from Various Anatomical Locations";
Biomechanics and Modeling in Mechanobiology,
7
(2008),
1;
S. 27
- 42.
Zusätzliche Informationen
-
A.Y. Matveeva, H. J. Böhm, G. Kravchenko, F.W.J. van Hattum:
"Investigation of the Embedded Element Technique for Modelling Wavy CNT Composites";
CMC - Computers Materials & Continua,
42
(2014),
1;
S. 1
- 23.
Zusätzliche Informationen
-
A.Y. Matveeva, S.V. Pyrlin, M.M.D. Ramos, H. J. Böhm, F.W.J. van Hattum:
"Influence of Waviness and Curliness of Fibres on Mechanical Properties of Composites";
Computational Materials Science,
87
(2014),
S. 1
- 11.
Zusätzliche Informationen
-
K.L. Maurer, F. G. Rammerstorfer, F.D. Fischer:
"Das Erzherzog Karl Denkmal am Heldenplatz in Wien - Untersuchungen zum Gefügeaufbau und zur Standfestigkeit";
Praktische Metallographie - Practical Metallography,
22
(1991),
S. 33
- 52.
-
P.H. Mayrhofer, F.D. Fischer, H. J. Böhm, C. Mitterer, J.M. Schneider:
"Energetic Balance and Kinetics for the Decomposition of Supersaturated Ti_(1-x)Al_xN";
Acta Materialia,
55
(2007),
4;
S. 1441
- 1446.
Zusätzliche Informationen
-
A. Meleddu, S. Barrault, P.K. Zysset:
"A Rigorous Method for Evaluation of the 6D Compliance of External Fixators";
Biomechanics and Modeling in Mechanobiology,
6
(2007),
4;
S. 253
- 264.
Zusätzliche Informationen
-
P. Mesquida, D. Kohl, O.G. Andriotis, P.J. Thurner, M. Dauer, S. Bansode, G. Schitter:
"Evaluation of surface charge shift of collagen fibrils exposed to glutaraldehyde";
Scientific Reports,
8:10126
(2018),
S. 1
- 7.
Zusätzliche Informationen
-
W. Mitter, F. G. Rammerstorfer, O. Gründler, G. Wiedner:
"Discrepancies Between Calculated and Measured Residual Stresses in a Quenched Pure Iron Cylinder";
Materials Science and Technology,
1
(1985),
S. 793
- 798.
-
R. Moreno, ö. Smedby, D. H. Pahr:
"Prediction of Apparent Trabecular Bone Stiffness Through Fourth-Order Fabric Tensors";
Biomechanics and Modeling in Mechanobiology,
15
(2016),
4;
S. 831
- 844.
Zusätzliche Informationen
-
C. Muschitz, R. Kocijan, J. Haschka, D. H. Pahr, A. Kaider, P. Pietschmann, D. Hans, G.K. Muschitz, A. Fahrleitner-Pammer, H. Resch:
"TBS Reflects Trabecular Microarchitecture in Premenopausal Women and Men with Idiopathic Osteoporosis and Low-Traumatic Fractures";
Bone,
79
(2015),
S. 259
- 266.
Zusätzliche Informationen
-
C. Muschitz, R. Kocijan, D. H. Pahr, J. Patsch, K. Amrein, B.M. Misof, A. Kaider, H. Resch, P. Pietschmann:
"Ibandronate Increases Sclerostin Levels and Bone Strength in Male Patiens with Idiopathic Osteoporosis";
Calcified Tissue International,
96
(2015),
S. 477
- 489.
Zusätzliche Informationen
-
F. Nahler, F.D. Fischer, F. G. Rammerstorfer:
"Erdbebensichere Bemessung zylindrischer Behälter";
ÖIAZ,
131
(1986),
S. 367
- 371.
-
V. Nedelkovski, O.G. Andriotis, K. Wieland, C. Gasser, A. Steiger-Thirsfeld, J. Bernardi, M. Pretterklieber, P.J. Thurner:
"Microbeam bending of hydrated human cortical bone lamellae from the central region of the body of femur shows viscoelastic behaviour";
Journal of the Mechanical Behavior of Biomedical Materials,
125
(2022),
104815;
S. 1
- 12.
-
V. Nedelkovski, R Hahn, P.H. Mayrhofer, A. Steiger-Thirsfeld, J. Bernardi, P.J. Thurner:
"Influence of experimental constraints on micromechanical assessment of micromachined hard-tissue samples";
Journal of the Mechanical Behavior of Biomedical Materials,
106
(2020),
103741.
-
E. Neubauer, C. Eisenmenger-Sittner, H. Bangert, D. Duschelbauer, H. E. Pettermann, G. Korb:
"Tailored Interfaces In Cu-C composite Materials Using Coated Fibers And Hot Pressing Methods";
Mat. Tech & Adv. Perf. Mat.,
18
(2003),
3;
S. 144
- 149.
Zusätzliche Informationen
-
E. Neubauer, C. Eisenmenger-Sittner, H. Bangert, D. Duschlbauer, H. E. Pettermann, G. Korb:
"Tailored Interfaces in Cu-C Composite Materials Using Coated Fibers and Hot Pressing Methods";
Materials Technology,
18
(2003),
3;
S. 144
- 149.
-
H.N. Nguyen, D. H. Pahr, T. Gross, M.M. Skinner, T.L. Kivell:
"Micro-Finite Element (μFE) Modeling of the Siamang (Symphalangus syndactylus) Third Proximal Phalanx: The Functional Role of Curvature and the Flexor Sheath Ridge";
Journal of Human Evolution,
67
(2014),
S. 60
- 75.
Zusätzliche Informationen
-
W.M. Niehaus, R.P. Howlin, D.A. Johnston, D.J. Bull, G.M. Jones, E. Calton, M.N. Mavogordato, S.C. Clarke, P.J. Thurner, S.N. Faust, P. Stoodley:
"Development of X-Ray Micro-Focus Computed Tomography to Image and Quantify Biofilms in Central Venous Catheter Models in Vitro";
Microbiology (UK),
162
(2016),
S. 1629
- 1640.
Zusätzliche Informationen
-
L.V. Nikitin, F.D. Fischer, E.R. Oberaigner, F. G. Rammerstorfer, M. Seitzberger, R.I. Mogilevsky:
"On the Frictional Behaviour of Thermally Loaded Beams Resting on a Plane";
International Journal of Mechanical Sciences,
38
(1996),
11;
S. 1219
- 1229.
Zusätzliche Informationen
-
S. Nobakhti, O.L. Katsamenis, N. Zaarour, G. Limbert, P.J. Thurner:
"Elastic Modulus Varies Along the Bovine Femur";
Journal of the Mechanical Behavior of Biomedical Materials,
71
(2017),
S. 271
- 285.
Zusätzliche Informationen
-
S. Nobakhti, G. Limbert, P.J. Thurner:
"Cement Lines and Interlamellar Areas in Compact Bone as Strain Amplifiers - Contributors to Elasticity, Fracture Toughness and Mechanotransduction";
Journal of the Mechanical Behavior of Biomedical Materials,
29
(2014),
S. 235
- 251.
Zusätzliche Informationen
-
S. Nogales, H. J. Böhm:
"Modeling of the Thermal Conductivity and Thermomechanical Behavior of Diamond Reinforced Composites";
International Journal of Engineering Science,
46
(2008),
6;
S. 156
- 163.
Zusätzliche Informationen
-
S. Nürnberger, C. Schneider, C. Keibl, B. Schädl, P. Heimel, X. Monforte, A. Teuschl, M. Nalbach, P.J. Thurner, J. Grillari, H. Redl, S. Wolbank:
"Repopulation of decellularised articular cartilage by laser-based matrix engraving";
EBioMedicine,
64
(2021),
103196;
S. 1
- 15.
-
J.A. Núñez, A. Goring, E. Hesse, P.J. Thurner, P. Schneider, C.E. Clarkin:
"Simultanous Visualisation of Calcified Bone Microstructure and Intracortical Vasculature Using Synchrotron X-Ray Phase Contrast-Enhanced Tomography";
Scientific Reports,
7
(2017),
13289.
Zusätzliche Informationen
-
J.A. Núñez, A. Goring, B. Javaheri, H. Razi, D. Gomez-Nicola, E. Hesse, A.A. Pitsillides, P.J. Thurner, P. Schneider, C.E. Clarkin:
"Regional diversity in the murine cortical vascular network is revealed by synchrotron x-ray tomography and is amplified with age";
European Cells & Materials,
35
(2018),
S. 281
- 299.
Zusätzliche Informationen
-
M.Y. Nyashin, V.S. Pechenov, F. G. Rammerstorfer:
"Determination of Optimal Orthodontic Forces";
Russian Journal of Biomechanics,
1-2
(1997),
S. 84
- 96.
-
Y.I. Nyashin, M.Y. Nyashin, M.A. Osipenko, V.A. Lokhov, A. Dubinin, F. G. Rammerstorfer, A. Zhurov:
"Centre of Resistance and Centre of Rotation of a Tooth: Experimental Determination, Computer Simulation and the Effects of Tissue Nonlinearity";
Computer Methods in Biomechanics and Biomedical Engineering,
19
(2016),
9;
S. 229
- 239.
Zusätzliche Informationen
-
D. H. Pahr, S. M. Arnold:
"The Applicability of the Generalized Method of Cells for Analyzing Discontinuously Reinforced Composites";
Composites - Part B: Engineering,
33B
(2002),
2;
S. 153
- 170.
Zusätzliche Informationen
-
D. H. Pahr, H. Böhm, K. Humer, H. W. Weber:
"Analytical and finite element investigations of shear/compression test fixtures";
Cryogenics,
45
(2005),
S. 606
- 616.
Zusätzliche Informationen
-
D. H. Pahr, H. J. Böhm:
"Assessment of Mixed Uniform Boundary Conditions for Predicting the Mechanical Behavior of Elastic and Inelastic Discontinuously Reinforced Composites";
CMES - Computer Modeling in Engineering and Sciences,
34
(2008),
2;
S. 117
- 136.
Zusätzliche Informationen
-
D. H. Pahr, E. Dall´Ara, P. Varga, P.K. Zysset:
"HR-pQCT-Based Homogenised Finite Element Models Provide Quantitative Predictions of Experimental Vertebral Body Stiffness and Strength with the Same Accuracy as μFE Models";
Computer Methods in Biomechanics and Biomedical Engineering,
15
(2012),
7;
S. 711
- 720.
Zusätzliche Informationen
-
D. H. Pahr, F. G. Rammerstorfer:
"A Fast Multi-Scale Analyzing Tool for the Investigation of Perforated Laminates";
Computers and Structures,
82
(2004),
S. 227
- 239.
Zusätzliche Informationen
-
D. H. Pahr, F. G. Rammerstorfer:
"Buckling of Honeycomb Sandwiches: Periodic Finite Element Considerations";
CMES - Computer Modeling in Engineering and Sciences,
12
(2006),
3;
S. 229
- 241.
Zusätzliche Informationen
-
D. H. Pahr, F. G. Rammerstorfer:
"Experimental and Numerical Investigations of Perforated CFR Woven Fabric Laminates";
Composites Science and Technology,
64
(2004),
9;
S. 1403
- 1410.
Zusätzliche Informationen
-
D. H. Pahr, F. G. Rammerstorfer, P. Rosenkranz, K. Humer, H. W. Weber:
"A study of short-beam-shear and double-lap-shear specimens of glass fabric/epoxy composites";
Composites - Part B: Engineering,
33
(2002),
S. 125
- 132.
Zusätzliche Informationen
-
D. H. Pahr, A.G. Reisinger:
"A Review on Recent Advances in the Constitutive Modeling of Bone Tissue";
Current Osteoporosis Reports,
18
(2020),
S. 696
- 704.
-
D. H. Pahr, C. Schuecker, F. G. Rammerstorfer, H. E. Pettermann:
"Numerical Investigations of Perforated Laminates in the Presence of Residual Ply Stresses";
Journal of Composite Materials,
38
(2004),
22;
S. 1977
- 1991.
Zusätzliche Informationen
-
D. H. Pahr, J.J. Schwiedrzik, E. Dall´Ara, P.K. Zysset:
"Clinical vs. Pre-Clinical FE Models for Vertebral Body Strength Predictions";
Journal of the Mechanical Behavior of Biomedical Materials,
33
(2014),
S. 76
- 83.
Zusätzliche Informationen
-
D. H. Pahr, P.K. Zysset:
"A Comparison of Enhanced Continuum FE with Micro FE Models of Human Vertebral Bodies";
Journal of Biomechanics,
42
(2009),
4;
S. 455
- 462.
Zusätzliche Informationen
-
D. H. Pahr, P.K. Zysset:
"FE-Simulation in der klinischen Osteoporoseforschung";
Osteologie,
22
(2013),
1;
S. 7
- 12.
Zusätzliche Informationen
-
D. H. Pahr, P.K. Zysset:
"FE-Simulation in der klinischen Osteoporoseforschung: Möglichkeiten und Trends";
Journal für Mineralstoffwechsel,
20
(2013),
3;
S. 95
- 100.
Zusätzliche Informationen
-
D. H. Pahr, P.K. Zysset:
"Finite Element-Based Mechanical Assessment of Bone Quality on the Basis of In Vivo Images";
Current Osteoporosis Reports,
14
(2016),
S. 374
- 385.
Zusätzliche Informationen
-
D. H. Pahr, P.K. Zysset:
"From High-Resolution CT Data to Finite Element Models: Development of an Integrated Modular Framework";
Computer Methods in Biomechanics and Biomedical Engineering,
12
(2009),
1;
S. 45
- 57.
Zusätzliche Informationen
-
D. H. Pahr, P.K. Zysset:
"Influence of Boundary Conditions on Computed Apparent Elastic Properties of Cancellous Bone";
Biomechanics and Modeling in Mechanobiology,
7
(2008),
6;
S. 463
- 476.
Zusätzliche Informationen
-
J. Panyasantisuk, D. H. Pahr, T. Gross, P.K. Zysset:
"Comparison of Mixed and Kinematic Uniform Boundary Conditions in Homogenized Elasticity of Femoral Trabecular Bone Using Microfinite Element Analyses";
Journal of Biomechanical Engineering - Transactions of the ASME,
137
(2015),
1;
S. 011002(7).
Zusätzliche Informationen
-
J. Panyasantisuk, D. H. Pahr, P.K. Zysset:
"Effect of Boundary Conditions on Yield Properties of Human Femoral Trabecular Bone";
Biomechanics and Modeling in Mechanobiology,
15
(2016),
5;
S. 1043
- 1053.
Zusätzliche Informationen
-
E.P. Paschalis, D.N. Tatakis, S.P. Robins, P. Fratzl, I. Manjubala, R. Zöhrer, S. Gamsjäger, B. Buchinger, A. Roschger, R. Phipps, A. Boskey, E. Dall´Ara, P. Varga, P.K. Zysset, K. Klaushofer, P. Roschger:
"Lathyrism-Induced Alterations in Collagen Cross-Links Influence the Mechanical Properties of Bone Material without Affecting the Mineral";
Bone,
49
(2011),
6;
S. 1232
- 1241.
Zusätzliche Informationen
-
J. Patsch, F.W. Kiefer, P. Varga, P. Pail, M. Rauner, D. Stupphann, H. Resch, D. Moser, P.K. Zysset, T.M. Stulnig, P. Pietschmann:
"Increased Bone Resorption and Impaired Bone Microarchitecture in Short-Term and Extended High-Fat Diet-Induced Obesity";
Metabolism - Clinical and Experimental,
60
(2011),
2;
S. 243
- 249.
Zusätzliche Informationen
-
H. E. Pettermann:
"Numerical simulations of a compositionally graded structure using a hierarchical approach";
Materials Science and Engineering A,
276
(2000),
1-2;
S. 277
- 282.
Zusätzliche Informationen
-
H. E. Pettermann:
"Theorie und Anwendung von nichtlinearen Konstitutivgesetzen für Verbundwerkstoffe im Rahmen von FEM Analysen";
NAFEMS Magazin,
http://www.nafems.org/downloads/magazin/
(2008),
10;
8 S.
Zusätzliche Informationen
-
H. E. Pettermann, H. J. Böhm:
"Effective Thermoelastic Behavior of Composites with a Given Orientation Distribution of Inclusions";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik,
75
(1995),
Supplement 1;
S. 161
- 162.
-
H. E. Pettermann, H. J. Böhm, J. Alcalá:
"Normalized Diagrams for Micro-Mechanical Estimates of the Elastic Response of Composite Materials";
Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science,
33A
(2002),
10;
S. 3187
- 3199.
Zusätzliche Informationen
-
H. E. Pettermann, H. J. Böhm, F. G. Rammerstorfer:
"Some Direction Dependent Properties of Matrix-Inclusion Type Composites with Given Reinforcement Orientation Distributions";
Composites - Part B: Engineering,
28B
(1997),
3;
S. 253
- 265.
Zusätzliche Informationen
-
H. E. Pettermann, A. DeSimone:
"An anisotropic linear thermo-viscoelastic constitutive law";
Mechanics of Time-Dependent Materials,
22
(2018),
4;
S. 421
- 433.
Zusätzliche Informationen
-
H. E. Pettermann, C.O. Huber, M.H. Luxner, S. Nogales, H. J. Böhm:
"An Incremental Mori-Tanaka Homogenization Scheme for Finite Strain Thermoelastoplasticity of MMCs";
Materials,
3
(2010),
1;
S. 434
- 451.
Zusätzliche Informationen
-
H. E. Pettermann, J. Hüsing:
"Modeling and Simulation of Relaxation in Viscoelastic Open Cell Materials and Structures";
International Journal of Solids and Structures,
49
(2012),
S. 2848
- 2853.
Zusätzliche Informationen
-
H. E. Pettermann, T.J. Reiter, F. G. Rammerstorfer:
"Computational Simulation of Internal Bone Remodeling";
Archives of Computational Methods in Engineering,
4
(1997),
S. 295
- 323.
-
H. E. Pettermann, T.J. Reiter, F. G. Rammerstorfer:
"Ein Simulationsalgorithmus der natürlichen Anpassung des orthotropen Knochenmaterials";
Biomedizinische Technik,
40
(1995),
E2;
S. 127
- 129.
-
H. Pettermann, A. F. Plankensteiner, H. J. Böhm, F. G. Rammerstorfer:
"A Thermo-Elasto-Plastic Constitutive Law for Inhomogeneous Materials Based on an Incremental Mori-Tanaka Approach";
Computers and Structures,
71
(1999),
2;
S. 197
- 214.
Zusätzliche Informationen
-
A. F. Plankensteiner, H. J. Böhm, F. G. Rammerstorfer, H. E. Pettermann:
"Multiscale Modeling of Highly Heterogeneous Particulate MMCs";
Journal de Physique,
8
(1998),
S. 301
- 308.
-
A.F. Plankensteiner, H. J. Böhm, F. G. Rammerstorfer, V.A. Buryachenko:
"Hierarchical Modeling of the Mechanical Behavior of High Speed Steels as Layer-Structured Particulate MMCs";
Journal de Physique IV,
6
(1996),
C6;
S. 395
- 402.
Zusätzliche Informationen
-
A.F. Plankensteiner, H. J. Böhm, F. G. Rammerstorfer, V.A. Buryachenko, G. Hackl:
"Modeling of Layer-Structured High Speed Steel";
Acta Materialia,
45
(1997),
5;
S. 1875
- 1887.
Zusätzliche Informationen
-
M. Pleschberger, F. G. Rammerstorfer:
"Spannungs- und Deformationsanalyse des zahnlosen menschlichen Unterkiefers mit Hilfe der Methode der finiten Elemente";
Biomedizinische Technik,
40
(1995),
E2;
S. 124
- 126.
-
N.L. Praxmarer, F. G. Rammerstorfer, K. Irsigler, T. Kästenbauer:
"Eine Meßmethode zur Erfassung von Fußsteifigkeiten und ihre Anwendungen";
Biomedizinische Technik,
40
(1995),
E2;
S. 90
- 92.
-
J. Predan, M. Kegl, R. Abart, F.D. Fischer, F. G. Rammerstorfer:
"On an alternative approach for simulating chemically induced crack pattern evolutions in a single crystal";
International Journal of Solids and Structures,
202
(2020),
S. 575
- 586.
-
C. Räth, R. Monetti, J.S. Bauer, I. Sidorenko, D. Müller, M. Matsuura, E.M. Lochmüller, P.K. Zysset, F. Eckstein:
"Strength Through Structures: Visualization and Local Assessment of the Trabecular Bone Structure";
New Journal of Physics,
10
(2008).
Zusätzliche Informationen
-
F. G. Rammerstorfer:
"Buckling of elastic structures under tensile loads";
Acta Mechanica,
229
(2018),
2;
S. 881
- 900.
Zusätzliche Informationen
-
F. G. Rammerstorfer:
"Comment on: Buckling of rotating rods and plates";
International Journal of Mechanical Sciences,
16
(1974),
S. 515
- 517.
-
F. G. Rammerstorfer:
"Increase of the first natural frequency and buckling load of plates by optimal fields of initial stresses";
Acta Mechanica,
27
(1977),
S. 217
- 238.
-
F. G. Rammerstorfer:
"On the Modeling of Cracks by Finite Elements";
Scandinavian Journal of Metallury,
12
(1983),
S. 293
- 298.
-
F. G. Rammerstorfer:
"On the optimal distribution of the Young's modulus of a vibrating prestressed beam";
Journal of Sound and Vibration,
37
(1974),
1;
S. 140
- 145.
-
F. G. Rammerstorfer:
"Optimale Eigenspannungszustände in schwingenden, vorgespannten Kreisplatten";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik,
57
(1977),
S. 84
- 87.
-
F. G. Rammerstorfer, W. Auli, F.D. Fischer:
"Abheben und Beulen von zylindrischen Behältern bei Windbelastung";
ÖIAZ,
131
(1986),
S. 137
- 139.
-
F. G. Rammerstorfer, W. Auli, F.D. Fischer:
"Uplifting and Stability of Wind-Loaded Vertical Cylindrical Shells";
Engineering Computations,
2
(1985),
3;
S. 170
- 180.
-
F. G. Rammerstorfer, W. Auli, K. Scharf:
"FE-Formulierungen für Parameterresonanzen bei geometrisch nichtlinearem Bauteilverhalten";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik,
69
(1989),
5;
S. 422
- 425.
-
F. G. Rammerstorfer, S. Bauer, J. Scheidl:
"Analytical modelling of autofrettage processes - Historical approaches and new results";
PAMM,
18
(2018),
e201800119;
2 S.
-
F. G. Rammerstorfer, R. Beer:
"Die Erhöhung der Grundfrequenz und der Beullast von dünnen Kreisplatten durch geeignete plastische Verformung";
Forschung im Ingenieurwesen,
42
(1976),
5;
S. 168
- 172.
-
F. G. Rammerstorfer, W. Billinger, F.D. Fischer:
"Beulversuche an dünnwandigen, flüssigkeitsgefüllten Schalen";
ÖIAZ,
8
(1988),
S. 430
- 431.
-
F. G. Rammerstorfer, W. Billinger, F.D. Fischer:
"Stabilität flüssigkeitsgefüllter unverankerter Zylinderschalen auf schräger Unterlage";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik,
68
(1988),
S. 240
- 243.
-
F. G. Rammerstorfer, K. Dorninger, H. J. Böhm, F. Zerobin:
"Analysis of Frictional Contact Problems in High Field Superconducting Magnets for Hadron Collider";
Computers and Structures,
32
(1989),
3/4;
S. 787
- 795.
Zusätzliche Informationen
-
F. G. Rammerstorfer, K. Dorninger, J. Ployer:
"Nonlinear Stability Problems in Connection with Buried Pipelines for Hot Water Supply";
PVP Pressure Vessels and Piping,
169
(1989),
S. 57
- 62.
-
F. G. Rammerstorfer, F. Fischer, W. Mitter, K.J. Bathe, M.D. Snyder:
"On Thermo-Elastic-Plastic Analysis of Heat-Treatment Processes Including Creep and Phase Change";
Computers and Structures,
13
(1981),
S. 771
- 779.
-
F. G. Rammerstorfer, F.D. Fischer:
"A Method for the Experimental Determination of Residual Stresses in Axisymmetric Composite Cylinders";
Journal of Engineering Materials and Technology,
114
(1992),
S. 90
- 96.
-
F. G. Rammerstorfer, F.D. Fischer, H. J. Böhm, W. Daves:
"Computational Micromechanics of Multiphase Materials";
Computers and Structures,
44
(1992),
1-2;
S. 453
- 458.
Zusätzliche Informationen
-
F. G. Rammerstorfer, F.D. Fischer, R. Flesch:
"Simulation von Erdbebenbeanspruchungen flüssigkeitsgefüllter Lagertanks - Modellversuche";
ÖIAZ,
131
(1986),
S. 414
- 418.
-
F. G. Rammerstorfer, F.D. Fischer, N. Friedl:
"Buckling of Free Infinite Strips Under Residual Stresses and Global Tension";
Journal of Applied Mechanics - Transactions of the ASME,
68
(2001),
3;
S. 399
- 404.
Zusätzliche Informationen
-
F. G. Rammerstorfer, F.D. Fischer, Ch. Jaquemar, H. Kreulitsch, A. Scheinecker, J. Stulik, A. Niedermayr:
"Die thermischen und thermo-visko-elasto-plastischen Vorgänge beim Stranggießen von Stahl";
Archiv f.d. Eisenhüttenwesen,
51
(1980),
2;
S. 67
- 72.
-
F. G. Rammerstorfer, F.D. Fischer, Ch. Jaquemar, H. Kreulitsch, A. Scheinecker, J. Stulik, A. Niedermayr:
"Verfahren zur Berechnung der thermischen und thermo-visko-elasto-plastischen Vorgänge beim Stranggießen von Stahl";
Archiv f.d. Eisenhüttenwesen,
51
(1980),
2;
S. 61
- 66.
-
F. G. Rammerstorfer, F. Hastik:
"Der dynamische E-Modul von Schleifkörpern";
Werkstatt und Betrieb,
107
(1974),
9;
S. 527
- 533.
-
F. G. Rammerstorfer, D. H. Pahr, T. Daxner, W.K. Vonach:
"Buckling in Thin Walled Micro and Meso Structures of Lightweight Materials and Material Compounds";
Computational Mechanics,
37
(2006),
6;
S. 470
- 478.
Zusätzliche Informationen
-
F. G. Rammerstorfer, A.F. Plankensteiner, F.D. Fischer, T. Antretter:
"Hierarchical Models for Simulating the Mechanical Behavior of Heterogeneous Materials - An Approach to High Speed Tool Steels";
Materials Science and Engineering A,
259
(1999),
1;
S. 73
- 84.
Zusätzliche Informationen
-
F. G. Rammerstorfer, K. Scharf, H. J. Böhm:
"Eine kritische Betrachtung der Schubfeldtheorie";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik,
67
(1987),
S. 133
- 136.
-
F. G. Rammerstorfer, K. Scharf, F.D. Fischer:
"On Problems in the Use of Earthquake Response Spectrum Methods for Fluid-Structure-Soil Interaction";
PVP Pressure Vessels and Piping,
157
(1989),
S. 61
- 68.
-
F. G. Rammerstorfer, K. Scharf, F.D. Fischer:
"Storage Tanks under Earthquake Loading";
Applied Mechanics Reviews,
43
(1990),
11;
S. 216
- 282.
-
F. G. Rammerstorfer, K. Scharf, F.D. Fischer, R. Seeber:
"Collapse of Earthquake Excited Tanks";
Res Mechanica,
25
(1988),
S. 129
- 143.
-
F. G. Rammerstorfer, K. Scharf, K.L. Maurer, F.D. Fischer:
"Stress Analysis of the Archduke Carl Monument in Vienna";
International Journal of Computer Applications in Technology,
5
(1992),
S. 100
- 108.
-
F. G. Rammerstorfer, A. Starlinger, K. Dorninger:
"Combined Micro- and Macromechanical Considerations of Layered Composite Shells";
International Journal for Numerical Methods in Engineering,
37
(1994),
15;
S. 2609
- 2629.
Zusätzliche Informationen
-
F. G. Rammerstorfer, H. Steiner, A. Grossmayer, F. Ziegler:
"Plötzliche Veränderung von Randbedingungen eines Biegebal¬kens";
Acta Mechanica,
33
(1979),
S. 147
- 162.
-
F. G. Rammerstorfer, E.T. Till, H. Bramerdorfer, H. Schubert, K. Schwaha:
"Model Investigations on Horizontal Continuous Casting";
Fachberichte Hüttenpraxis Metallverarbeitung,
22
(1984),
S. 834
- 839.
-
F. G. Rammerstorfer, F. Wiesinger, E. Tomandl:
"Weinflaschen führen auf Stabilitätsprobleme";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik,
65
(1985),
4;
S. 93
- 96.
-
L. Rapillard, M. Charlebois, P.K. Zysset:
"Compressive Fatigue Behavior of Human Vertebral Trabecular Bone";
Journal of Biomechanics,
39
(2006),
11;
S. 2133
- 2139.
Zusätzliche Informationen
-
A. Rasool, H. J. Böhm:
"Effects of Particle Shape on the Macroscopic and Microscopic Linear Behaviors of Particle Reinforced Composites";
International Journal of Engineering Science,
58
(2012),
S. 21
- 34.
Zusätzliche Informationen
-
A.G. Reisinger, M. Frank, P.J. Thurner, D. H. Pahr:
"A two-layer elasto-visco-plastic rheological model for the material parameter identification of bone tissue";
Biomechanics and Modeling in Mechanobiology,
19
(2020),
S. 2149
- 2162.
-
A.G. Reisinger, D. H. Pahr, P.K. Zysset:
"Elastic Anisotropy of Bone Lamellae as a Function of Fibril Orientation Pattern";
Biomechanics and Modeling in Mechanobiology,
10
(2011),
1;
S. 67
- 77.
Zusätzliche Informationen
-
A.G. Reisinger, D. H. Pahr, P.K. Zysset:
"Principal Stiffness Orientation and Degree of Anisotropy of Human Osteons Based on Nanoindentation in Three Distinct Planes";
Journal of the Mechanical Behavior of Biomedical Materials,
4
(2011),
8;
S. 2113
- 2127.
Zusätzliche Informationen
-
A.G. Reisinger, D. H. Pahr, P.K. Zysset:
"Sensitivity Analysis and Parametric Study of Elastic Properties of an Unidirectional Mineralized Bone Fibril-Array Using Mean Field Methods";
Biomechanics and Modeling in Mechanobiology,
9
(2010),
5;
S. 499
- 510.
Zusätzliche Informationen
-
T.J. Reiter:
"Topologieoptimierung mittels eines biologischen Wachstumsalgorithmus";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik,
73
(1993),
S. 811
- 814.
-
T.J. Reiter, H. J. Böhm, W. Krach, M. Pleschberger, F. G. Rammerstorfer:
"Some Applications of the Finite Element Method in Biomechanical Stress Analysis";
International Journal of Computer Applications in Technology,
7
(1994),
3-6;
S. 233
- 241.
Zusätzliche Informationen
-
T.J. Reiter, G.J. Dvorak, V. Tvergaard:
"Micromechanical Models for Graded Composite Materials";
Journal of the Mechanics and Physics of Solids,
45
(1997),
8;
S. 1281
- 1302.
Zusätzliche Informationen
-
T.J. Reiter, F. G. Rammerstorfer, H. J. Böhm:
"Zur numerischen Prognose spannungsbedingter Knochenumbildungen";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik,
71
(1991),
S. 693
- 697.
-
L. Rincón-Kohli, P.K. Zysset:
"Multi-Axial Mechanical Properties of Human Trabecular Bone";
Biomechanics and Modeling in Mechanobiology,
8
(2009),
3;
S. 195
- 208.
Zusätzliche Informationen
-
P. Rosenkranz, K. Humer, H. W. Weber, D. H. Pahr, F. G. Rammerstorfer:
"Static and Dynamic Scaling Experiments on Double Lap Shear Specimens at Room Temperature and at 77 K";
Cryogenics,
41
(2001),
1;
S. 21
- 25.
Zusätzliche Informationen
-
I. Sabirov, D. Duschlbauer, H. E. Pettermann, O. Kolednik:
"The Determination of the Local Conditions for Void Initiation in Front of a Crack Tip for Materials with Second Phase Particles";
Materials Science and Engineering A,
393
(2005),
S. 275
- 285.
Zusätzliche Informationen
-
J. Saelzer, Y. Alammari, A. Zabel, D. Biermann, J. Lee, S. Elgeti:
"Characterisation and modelling of friction depending on the tool topography and the intermediate medium";
Procedia CIRP,
102
(2021),
S. 435
- 440.
-
A. Saigal, A.E. Giannakopoulos, S. Suresh, H. E. Pettermann:
"Electrical Response during Indentation of a 1-3 Piezoelectric Ceramic-Polymer Composite";
Journal of Applied Physics,
86
(1999),
1;
S. 603
- 606.
Zusätzliche Informationen
-
K. Scharf, F. G. Rammerstorfer:
"Probleme bei der Anwendung der Antwortspektrenmethode für Flüssigkeit-Festkörper-Interaktionsprobleme des Erdbebeningenieurwesens";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik,
71
(1991),
S. 160
- 164.
-
W. Schneider, E. Zauner, H. J. Böhm:
"The Recirculatory Flow Induced by a Laminar Axisymmetric Jet Issuing from a Wall";
Journal of Fluids Engineering,
109
(1987),
S. 237
- 241.
Zusätzliche Informationen
-
C. Schuecker, D. H. Pahr, H. E. Pettermann:
"Accounting for Residual Stresses in FEM Analyses of Laminated Structures Using the Puck Criterion for Three-Axial Stress States";
Composites Science and Technology,
66
(2006),
13;
S. 2054
- 2062.
Zusätzliche Informationen
-
C. Schuecker, H. E. Pettermann:
"A Continuum Damage Model for Fiber Reinforced Laminates Based on Ply Failure Mechanisms";
Composite Structures,
76
(2006),
1-2;
S. 162
- 173.
Zusätzliche Informationen
-
C. Schuecker, H. E. Pettermann:
"Constitutive Ply Damage Modeling, FEM Implementation, and Analysis of Laminated Structures";
Computers and Structures,
86
(2008),
9;
S. 908
- 918.
Zusätzliche Informationen
-
C. Schuecker, H. E. Pettermann:
"Fiber Reinforced Laminates: Progressive Damage Modeling Based on Failure Mechanisms";
Archives of Computational Methods in Engineering,
15
(2008),
2;
S. 163
- 184.
Zusätzliche Informationen
-
P. Schuller-Götzburg, C. Krenkel, T.J. Reiter, H. Plenk:
"2D-Finite Element Analyses and Histomorphology of Lag Screws with and without a Biconcave Washer";
Journal of Biomechanics,
32
(1999),
5;
S. 511
- 520.
Zusätzliche Informationen
-
P. Schuller-Götzburg, M. Pleschberger, F. G. Rammerstorfer, C. Krenkel:
"3D-FEM and Histomorphology of Mandibular Reconstruction with the Titanium Functionally Dynamic Bridging Plate";
International Journal of Oral and Maxillofacial Surgery,
38
(2009),
12;
S. 1298
- 1305.
Zusätzliche Informationen
-
M. Schwab, H. E. Pettermann:
"Modeling and Simulation of Damage and Failure in Large Composite Components Subjected to Impact Loads";
Composite Structures,
158
(2016),
S. 208
- 216.
Zusätzliche Informationen
-
M. Schwab, M. Todt, H. E. Pettermann:
"A multiscale approach for modelling impact on woven composites under consideration of the fabric topology";
Journal of Composite Materials,
52
(2018),
21;
S. 2859
- 2874.
-
M. Schwab, M. Todt, J Tauchner, D. Schlie, H. E. Pettermann:
"Modeling, simulation, and experiments of high velocity impact on laminated composites";
Composite Structures,
205
(2018),
S. 42
- 48.
Zusätzliche Informationen
-
M. Schwab, M. Todt, M. Wolfahrt, H. E. Pettermann:
"Failure Mechanism Based Modelling of Impact on Fabric Reinforced Composite Laminates Based on Shell Elements";
Composites Science and Technology,
128
(2016),
S. 131
- 137.
Zusätzliche Informationen
-
J.J. Schwiedrzik, T. Gross, M. Bina, M. Pretterklieber, P.K. Zysset, D. H. Pahr:
"Experimental Validation of a Nonlinear μFE Model Based on Cohesive-Frictional Plasticity for Trabecular Bone";
International Journal for Numerical Methods in Biomedical Engineering,
32
(2016),
4.
Zusätzliche Informationen
-
J.J. Schwiedrzik, K. Kaudela, U. Burner, P.K. Zysset:
"Fabric-Mechanical Property Relationships of Trabecular Bone Allografts are Altered by Supercritical CO2 Treatment and Gamma Sterilization";
Bone,
48
(2011),
6;
S. 1370
- 1377.
Zusätzliche Informationen
-
J.J. Schwiedrzik, P.K. Zysset:
"An Anisotropic Elastic-Viscoplastic Damage Model for Bone Tissue";
Biomechanics and Modeling in Mechanobiology,
12
(2013),
2;
S. 201
- 213.
Zusätzliche Informationen
-
R. Seeber, F.D. Fischer, F. G. Rammerstorfer:
"Analysis of a Three-Dimensional Tank-Liquid-Soil Interaction Problem";
Journal of Pressure Vessel Technology,
112
(1990),
S. 28
- 33.
-
J. Segurado, P. Parteder, A. F. Plankensteiner, H. J. Böhm:
"Micromechanical Studies of the Densification of Porous Molybdenum";
Materials Science and Engineering A,
A333
(2002),
1-2;
S. 270
- 278.
Zusätzliche Informationen
-
K. Seidler, K. Ehrmann, P. Steinbauer, A. Rohatschek, O.G. Andriotis, C. Dworak, T. Koch, H. Bergmeister, C. Grasl, H. Schima, P.J. Thurner, R. Liska, S. Baudis:
"A structural reconsideration: Linear aliphatic or alicyclic hard segments for biodegradable thermoplastic polyurethanes?";
Journal of Polymer Science Part A: Polymer Chemistry,
56
(2018),
19;
S. 2214
- 2224.
Zusätzliche Informationen
-
M. Seitzberger:
"Application of Plastic Collapse Mechanism for the Axial Crushing Analysis of Tubular Steel Structures Filled with Aluminium Foam";
International Journal of Crashworthiness,
6
(2001),
2;
S. 165
- 176.
Zusätzliche Informationen
-
M. Seitzberger, F. G. Rammerstorfer:
"Study of Axisymmetric Crushing Mechanisms by Sequential Limit Analysis";
International Journal of Crashworthiness,
4
(1999),
S. 379
- 393.
-
M. Seitzberger, F. G. Rammerstorfer, H.P. Degischer, R. Gradinger:
"Crushing of Axially Compressed Steel Tubes Filled with Aluminium Foam";
Acta Mechanica,
125
(1997),
1-4;
S. 93
- 105.
Zusätzliche Informationen
-
M. Seitzberger, F. G. Rammerstorfer, R. Gradinger, H.P. Degischer, M. Blaimschein, C. Walch:
"Experimental Studies on the Quasi-Static Axial Crushing of Steel Columns Filled with Aluminium Foam";
International Journal of Solids and Structures,
37
(2000),
30;
S. 4125
- 4147.
Zusätzliche Informationen
-
M. Seitzberger, F. G. Rammerstorfer, C. Reichhold:
"Lokale Effekte in Linientragwerken mit geringer Biegesteifigkeit";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik,
77
(1997),
Supplement 1;
S. 311
- 312.
-
M. Seitzberger, S. Willminger:
"Versagensmechanismen zur Kollapsanalyse axial gedrückter Aluminiumschaum-gefüllter Profile";
Materialwissenschaft und Werkstofftechnik,
31
(2000),
6;
S. 459
- 469.
Zusätzliche Informationen
-
I. Sidorenko, R. Monetti, J.S. Bauer, D. Müller, E. Rummeny, F. Eckstein, M. Matsuura, E.M. Lochmüller, P.K. Zysset, C. Räth:
"Assessing Methods for Characterising Local and Global Structural and Biomechanical Properties of the Trabecular Bone Network";
Current Medicinal Chemistry,
18
(2011),
22;
S. 3402
- 3409.
Zusätzliche Informationen
-
V.V. Silberschmidt, F. G. Rammerstorfer, E. Werner, F.D. Fischer, P.J. Uggowitzer:
"On Material Immanent Ratchetting of Two-Phase Materials under Purely Thermal Loading";
Archive of Applied Mechanics,
69
(1999),
9-10;
S. 727
- 750.
Zusätzliche Informationen
-
E. Sim, W. Freimüller, T.J. Reiter:
"Finite Element Analysis of the Stress Distributions in the Proximal End of the Femur after Stabilization of a Pertrochanteric Model Fracture: A Comparison of Two Implants";
Injury,
26
(1995),
7;
S. 445
- 449.
Zusätzliche Informationen
-
W. Sipos, E. Kralicek, M. Rauner, C. Duvigneau, H. Worliczek, D. Schamall, R.T. Hartl, I. Sommerfeld-Stur, E. Dall´Ara, P. Varga, H. Resch, I. Schwendenwein, P.K. Zysset, P. Pietschmann:
"Bone and Cellular Immune System of Multiparous Sows are Insensitive to Ovariectomy and Nutritive Calcium Shortage";
Hormone and Metabolic Research,
43
(2011),
6;
S. 404
- 409.
Zusätzliche Informationen
-
W. Sipos, P.K. Zysset, P. Kostenuik, E. Mayrhofer, C. Bogdan, M. Rauner, M. Stolina, D. Dwyer, I. Sommerfeld-Stur, G. Pendl, H. Resch, E. Dall´Ara, P. Varga, P. Pietschmann:
"OPG-Fc Treatment in Growing Pigs Leads to Rapid Reductions in Bone Resorption Markers, Serum Calcium, and Bone Formation Markers";
Hormone and Metabolic Research,
43
(2011),
13;
S. 944
- 949.
Zusätzliche Informationen
-
M.M. Skinner, L. Georgiou, D. Stratford, Ch. J. Dunmore, A. Bardo, L.T. Buck, J. Hublin, D. H. Pahr, A. Synek, T.L. Kivell:
"Reply to Haeusler et al.: Internal structure of the femur provides robust evidence for locomotor and taxonomic diversity at Sterkfontein";
PNAS - Proceedings of the National Academy of Sciences of the United States of America,
117
(2020),
S. 28570
- 28571.
-
M.M. Skinner, N.B. Stephens, Z.J. Tsegai, A.C. Foote, H.N. Nguyen, T. Gross, D. H. Pahr, J. Hublin, T.L. Kivell:
"Human-Like Hand Use in Australopithecus Africanus";
Science,
23
(2015),
347;
S. 395
- 399.
Zusätzliche Informationen
-
I.C. Skrna-Jakl, D. H. Pahr, K.H. Karner, F. G. Rammerstorfer:
"Homogenization Technique for the Efficient Modeling of Large Scale Corrugated Core Sandwich Structures";
International Journal of Applied Physics and Mathematics,
4
(2014),
1;
S. 62
- 67.
Zusätzliche Informationen
-
I.C. Skrna-Jakl, F. G. Rammerstorfer:
"Leichtbau mit Faserverbundwerkstoffen, Teil 1";
Architektur & Bauforum - Forum,
246
(2004),
S. 9
- 11.
-
I.C. Skrna-Jakl, F. G. Rammerstorfer:
"Leichtbau mit Faserverbundwerkstoffen, Teil 2";
Architektur & Bauforum - Forum,
250
(2004),
S. 9
- 11.
-
I.C. Skrna-Jakl, F. G. Rammerstorfer:
"Numerical Investigations of Free Edge Effects in Integrally Stiffened Layered Composite Panels";
Computers and Structures,
25
(1993),
S. 129
- 137.
-
I.C. Skrna-Jakl, M.A. Stiftinger, F. G. Rammerstorfer:
"Numerical Investigations of an Imperfect Stringer-Stiffened Composite Wing Torsion Box - An Analysis Concept";
Composites - Part B: Engineering,
27
(1996),
1;
S. 59
- 69.
Zusätzliche Informationen
-
E. Soodmand, D. Kluess, P. Varady, R. Cichon, M. Schwarze, D. Gehweiler, F. Niemeyer, D. Pahr, M. Woiczinski:
"Interlaboratory comparison of femur surface reconstruction from CT data compared to reference optical 3D scan";
Biomedical engineering online,
17
(2018),
1;
29 S.
Zusätzliche Informationen
-
E. Spiesz, W. Kaminsky, P.K. Zysset:
"A Quantitative Collagen Fibers Orientation Assessment Using Birefringence Measurements: Calibration and Application to Human Osteons";
Journal of Structural Biology,
176
(2011),
3;
S. 302
- 306.
Zusätzliche Informationen
-
E. Spiesz, A.G. Reisinger, W. Kaminsky, P. Roschger, D. H. Pahr, P.K. Zysset:
"Computational and Experimental Methodology for Site-Matched Investigations of the Influence of Mineral mass Fraction and Collagen Orientation on the Axial Indentation Modulus of Lamellar Bone";
Journal of the Mechanical Behavior of Biomedical Materials,
28
(2013),
S. 195
- 205.
Zusätzliche Informationen
-
E. Spiesz, A.G. Reisinger, P. Roschger, P.K. Zysset:
"Experimental Validation of a Mean Field Model of Mineralized Collagen Fiber Arrays at Two Levels of Hierarchy";
Journal of Mechanics in Medicine and Biology,
14
(2014),
S. 1450013.
Zusätzliche Informationen
-
E. Spiesz, P. Roschger, P.K. Zysset:
"Elastic Anisotropy of Uniaxial Mineralized Collagen Fibers Measured Using Two-Directional Indentation. Effects of Hydration State and Indentation Depth";
Journal of the Mechanical Behavior of Biomedical Materials,
12
(2012),
S. 20
- 28.
Zusätzliche Informationen
-
E. Spiesz, P. Roschger, P.K. Zysset:
"Influence of Mineralization and Microporosity on Tissue Elasticity: Experimental and Numerical Investigations on Mineralized Turkey Leg Tendons";
Calcified Tissue International,
20
(2012),
4;
S. 319
- 329.
Zusätzliche Informationen
-
E. Spiesz, C. Thorpe, P.J. Thurner, H.R.C. Screen:
"Structure and Collagen Crimp Patterns of Functionally Distinct Equine Tendons, Revealed by Quantitative Polarised Light Microscopy (qPLM)";
Acta Biomaterialia,
70
(2018),
S. 281
- 292.
Zusätzliche Informationen
-
M. Springer, M. Nelhiebel, H. E. Pettermann:
"Combined Simulation of Fatigue Crack Nucleation and Propagation Based on a Damage Indicator";
Frattura ed Integrità Strutturale,
38
(2016),
S. 155
- 161.
Zusätzliche Informationen
-
M. Springer, H. E. Pettermann:
"Fatigue life predictions of metal structures based on a low-cycle, multiaxial fatigue damage model";
International Journal of Fatigue,
116
(2018),
S. 355
- 365.
-
M. Springer, A. Turon, H. E. Pettermann:
"A thermo-mechanical cyclic cohesive zone model for variable amplitude loading and mixed-mode behavior";
International Journal of Solids and Structures,
159
(2019),
S. 257
- 271.
-
J. Stampfl, M.H. Luxner, H. E. Pettermann:
"Zellulare Werkstoffe mit frei wählbarer Zellgeometrie - Herstellung, Modellierung der mechanischen Eigenschaften und Anwendungen";
Lignovisionen,
14
(2006),
S. 55
- 60.
-
A. Starlinger, P. Casagrande, H. J. Böhm:
"Die Entwicklung einer automatisierten Auswerteroutine zur Ermüdungsauswertung von Schienenfahrzeugkomponenten";
Materialprüfung,
49
(2007),
S. 414
- 417.
Zusätzliche Informationen
-
A. Starlinger, F. G. Rammerstorfer:
"Berücksichtigung von lokalem kurzwelligem Deckschichtbeulen in speziellen Finiten Sandwich-Schalenelementen";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik,
71
(1991),
S. 619
- 623.
-
A. Starlinger, F. G. Rammerstorfer, W. Auli:
"Beulen und Nachbeulverhalten von dünnen verrippten und unverrippten Kugelschalen unter Außendruck";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik,
68
(1988),
4;
S. 257
- 260.
-
A. Starlinger, F. G. Rammerstorfer, W. Scheidl:
"Stabilität von Generatorkuppeln";
ELIN-Zeitschrift,
41
(1989),
S. 14
- 21.
-
P. Steinbauer, A. Rohatschek, O.G. Andriotis, N. Bouropoulos, R. Liska, P.J. Thurner, S. Baudis:
"Biomimetic adhesion motifs based on RAFT polymers with phosphonate groups";
European Polymer Journal,
143
(2020),
110188;
S. 1
- 12.
Zusätzliche Informationen
-
P. Steinbauer, A. Rohatschek, O.G. Andriotis, N. Bouropoulos, R. Liska, P.J. Thurner, S. Baudis:
"Single-Molecule Force Spectroscopy Reveals Adhesion-by-Demand in Statherin at the Protein-Hydroxyapatite Interface";
Langmuir,
36
(2020),
44;
S. 13292
- 13300.
Zusätzliche Informationen
-
L. Steiner, A. Synek, D. H. Pahr:
"Comparison of different microCT-based morphology assessment tools using human trabecular bone";
Bone Reports,
12
(2020),
100261.
-
L. Steiner, A. Synek, D. H. Pahr:
"Femoral strength can be predicted from 2D projections using a 3D statistical deformation and texture model with finite element analysis";
Medical Engineering & Physics,
93
(2021),
S. 72
- 82.
-
N.B. Stephens, T.L. Kivell, T. Gross, D. H. Pahr, J. Hublin, I. Hershkovitz, M.M. Skinner:
"Trabecular Architecture in the Thumb of Pan and Homo: Implications for Investigating Hand Use, Loading, and Hand Preference in the Fossil Record";
American Journal of Physical Anthropology,
161
(2016),
S. 603
- 619.
Zusätzliche Informationen
-
M.A. Stiftinger:
"Spezielle Finite Elemente für die Analyse von Strukturen aus Verbundwerkstoffen";
Pipeline,
15
(1995),
S. 38
- 41.
-
M.A. Stiftinger, F. G. Rammerstorfer:
"On Face Layer Wrinkling in Sandwich Shells - Theoretical and Experimental Investigations";
Thin-Walled Structures,
29
(1997),
S. 113
- 127.
-
M.A. Stiftinger, I.C. Skrna-Jakl, F. G. Rammerstorfer:
"Buckling and Postbuckling Investigations of Imperfect Curved Composite Shells, Part B: Computational Investigations";
Thin-Walled Structures,
23
(1995),
S. 339
- 350.
-
M. Stipsitz, P.K. Zysset, D. H. Pahr:
"Efficient materially nonlinear 𝜇FE solver for simulations of trabecular bone failure";
Biomechanics and Modeling in Mechanobiology,
19
(2020),
S. 861
- 874.
-
M. Stipsitz, P.K. Zysset, D. H. Pahr:
"Prediction of the Inelastic Behaviour of Radius Segments: Damage-based Nonlinear Micro Finite Element Simulation vs Pistoia Criterion";
Journal of Biomechanics,
116
(2021),
110205;
S. 1
- 13.
-
A.J. Svobodnik, H. J. Böhm, F. G. Rammerstorfer:
"A 3/D Finite Element Approach for Metal Matrix Composites Based on Micromechanical Models";
International Journal of Plasticity,
7
(1991),
8;
S. 781
- 802.
Zusätzliche Informationen
-
A. Synek, S.F. Baumbach, D. H. Pahr:
"Towards optimization of volar plate fixations of distal radius fractures: Using finite element analyses to reduce the number of screws";
Clinical Biomechanics,
82
(2021),
105272;
S. 1
- 7.
-
A. Synek, L. Borgmann, H. Traxler, W. Huf, E. Euler, Y. Chevalier, S.F. Baumbach:
"Using Self-Drilling Screws in Volar Plate Osteosynthesis for Distal Radius Fractures: a feasibility studyOutcome of In Vitro Experiments";
BMC Musculoskeletal Disorders,
17
(2016),
120.
Zusätzliche Informationen
-
A. Synek, Y. Chevalier, S.F. Baumbach, D. H. Pahr:
"The Influence of Bone Density and Anisotropy in Finite Element Models of Distal Radius Fracture Osteosynthesis: Evaluations and Comparison to Experiments";
Journal of Biomechanics,
48
(2015),
15;
S. 4116
- 4123.
Zusätzliche Informationen
-
A. Synek, Y. Chevalier, C. Schröder, D. H. Pahr, S.F. Baumbach:
"Biomechanical Testing of Distal Radius Fracture Treatments: Boundary Conditions Significantly Affect the Outcome of In Vitro Experiments";
Journal of Applied Biomechanics,
32
(2016),
2;
S. 210
- 214.
Zusätzliche Informationen
-
A. Synek, Ch. J. Dunmore, T.L. Kivell, M.M. Skinner, D. H. Pahr:
"Inverse remodelling algorithm identifies habitual manual activities of primates based on metacarpal bone architecture";
Biomechanics and Modeling in Mechanobiology,
18
(2018),
2;
S. 399
- 410.
Zusätzliche Informationen
-
A. Synek, S.C. Lu, S. Nauwelaerts, D. H. Pahr, T.L. Kivell:
"Metacarpophalangeal joint loads during bonobo locomotion: model predictions versus proxies";
Journal of the Royal Society Interface,
17
(2020),
20200032.
-
A. Synek, S.C. Lu, E.E. Vereecke, S. Nauwelaerts, T.L. Kivell, D. H. Pahr:
"Musculoskeletal models of a human and bonobo finger: parameter identification and comparison to in vitro experiments";
PeerJ,
7
(2019),
e7470;
24 S.
-
A. Synek, D. H. Pahr:
"Plausibility and Parameter Sensitivity of Micro-Finite Element-Based Joint Load Prediction at the Proximal Femur";
Biomechanics and Modeling in Mechanobiology,
17
(2018),
3;
S. 843
- 852.
Zusätzliche Informationen
-
A. Synek, D. H. Pahr:
"The Effect of the Extensor Mechanism on Maximum Isometric Fingertip Forces: A Numerical Study on the Index Finger";
Journal of Biomechanics,
49
(2016),
14;
S. 3423
- 3429.
Zusätzliche Informationen
-
K. Tanaka, D. Hasegawa, H. J. Böhm, F.D. Fischer:
"Overall Thermomechanical Behavior of Shape Memory Alloys: A Micromechanical Approach Based on Mean Field Theory";
Materials Science Research International,
1
(1995),
1;
S. 23
- 30.
Zusätzliche Informationen
-
P.J. Thurner:
"Commentary on: Mechanical Properties of Cortical Bone and their Relationships with Age, Gender, Composition and Microindentation Properties in the Elderly";
Bone,
87
(2016),
S. 159
- 160.
-
P.J. Thurner, O.L. Katsamenis:
"The Role of Nanonscale Toughening Mechanisms in Osteoporosis";
Current Osteoporosis Reports,
12
(2014),
3;
S. 351
- 356.
Zusätzliche Informationen
-
E.T. Till, F. G. Rammerstorfer:
"Nonlinear Finite Element Analysis of an Autofrettage Process";
Computers and Structures,
7
(1983),
5-6;
S. 857
- 864.
-
M. Todt, R.D. Bitsche, M.A. Hartmann, F.D. Fischer, F. G. Rammerstorfer:
"Growth Limit of Carbon Onions - A Continuum Mechanical Study";
International Journal of Solids and Structures,
51
(2014),
3-4;
S. 706
- 715.
Zusätzliche Informationen
-
M. Todt, F. G. Rammerstorfer, F.D. Fischer, P.H. Mayrhofer, D. Holec, M.A. Hartmann:
"Continuum Modeling of van der Waals Interactions Between Carbon Onion Layers";
Carbon,
49
(2011),
5;
S. 1620
- 1627.
Zusätzliche Informationen
-
M. Todt, F. G. Rammerstorfer, O. Paris, F.D. Fischer:
"Nanomchanical Studies of the Compressive Behavior of Carbon Fibers";
Journal of Materials Science,
45
(2010),
24;
S. 6845
- 6848.
Zusätzliche Informationen
-
M. Todt, F. Toth, M.A. Hartmann, D. Holec, M.J. Cordill, F.D. Fischer, F. G. Rammerstorfer:
"Computational Simulation of Instability Phenomena in Nanoparticles and Nanofilms";
Computational Technology Reviews,
10
(2014),
S. 89
- 119.
Zusätzliche Informationen
-
F. Toth, M. Kaltenbacher:
"Fully Coupled Linear Modelling of Incompressible Free-Surface Flow, Compressible Air and Flexible Structures";
International Journal for Numerical Methods in Engineering,
107
(2016),
S. 947
- 969.
Zusätzliche Informationen
-
F. Toth, C. Kirchlechner, F.D. Fischer, G Dehm, F. G. Rammerstorfer:
"Compressed Bi-Crystal Micropillars Showing a Sigmoidal Deformation State - A Computational Study";
Materials Science and Engineering A,
700
(2017),
S. 168
- 174.
Zusätzliche Informationen
-
F. Toth, F. G. Rammerstorfer, M.J. Cordill, F.D. Fischer:
"Detailed Modelling of Delamination Buckling of Thin Films under Global Tension";
Acta Materialia,
61
(2013),
7;
S. 2425
- 2433.
Zusätzliche Informationen
-
Z.J. Tsegai, T.L. Kivell, T. Gross, H.N. Nguyen, D. H. Pahr, J.B. Smaers, M.M. Skinner:
"Trabecular Bone Structure Correlates with Hand Posture and Use in Hominoids";
PLoS ONE,
8
(2013),
11:e78781;
14 S.
Zusätzliche Informationen
-
Z.J. Tsegai, M.M. Skinner, A.H. Gee, D. H. Pahr, G.M. Treece, J. Hublin, T.L. Kivell:
"Trabecular and Cortical Bone Structure of the Talus and Distal Tibia in Pan and Homo";
American Journal of Physical Anthropology,
163
(2017),
4;
S. 784
- 805.
Zusätzliche Informationen
-
Z.J. Tsegai, M.M. Skinner, D. Pahr, J. Hublin, T.L. Kivell:
"Systemic patterns of trabecular bone across the human and chimpanzee skeleton";
Journal of Anatomy,
232
(2018),
4;
S. 641
- 656.
Zusätzliche Informationen
-
C.G. Tusan, Y.H. Man, H. Zarkoob, D.A. Johnston, O.G. Andriotis, P.J. Thurner, S. Yang, E.A. Sander, E. Gentleman, B.G. Sengers, N.D. Evans:
"Collective Cell Behavior in Mechanosensing of Substrate Thickness";
Biophysical Journal,
114
(2018),
11;
S. 2743
- 2755.
Zusätzliche Informationen
-
S. Ucsnik, M. Scheerer, S. Zaremba, D. H. Pahr:
"Experimental Investigation of a Novel Hybrid Metal-Composite Joining Technology";
Composites Part A: Applied Science and Manufacturing,
41
(2010),
3;
S. 158
- 165.
Zusätzliche Informationen
-
P. Varga, S. Baumbach, D. H. Pahr, P.K. Zysset:
"Validation of an Anatomy Specific Finite Element Model of Colles´ Fracture";
Journal of Biomechanics,
42
(2009),
11;
S. 1726
- 1731.
Zusätzliche Informationen
-
P. Varga, E. Dall´Ara, D. H. Pahr, M. Pretterklieber, P.K. Zysset:
"Validation of an HR-pQCT-Based Homogenized Finite Element Approach Using Mechanical Testing of Ultra-Distal Radius Sections";
Biomechanics and Modeling in Mechanobiology,
10
(2011),
4;
S. 431
- 444.
Zusätzliche Informationen
-
P. Varga, B. Hesse, M. Langer, S. Schrof, N. Männike, H. Suhonen, A. Pacareanu, D. H. Pahr, F. Peyrin, K. Raum:
"Synchrotron X-Ray Phase Nano-Tomography-Based Analysis of the Lacunar-Canaliicular Network Morphology and its Relation to the Strains Experienced by Osteocytes in Situ as Predicted by Case-Specific Finite Element Analysis";
Biomechanics and Modeling in Mechanobiology,
14
(2015),
S. 267
- 282.
Zusätzliche Informationen
-
P. Varga, D. H. Pahr, S. Baumbach, P.K. Zysset:
"HR-pQCT Based FE Analysis of the Most Distal Radius Section Provides an Improved Prediction of Colles' Fracture Load in Vitro";
Bone,
47
(2010),
5;
S. 982
- 988.
Zusätzliche Informationen
-
P. Varga, P. Schefzig, E. Unger, W. Mayr, P.K. Zysset, J. Erhart:
"Finite Element Based Estimation of Contact Areas and Pressures of the Human Scaphoid in Various Functional Positions of the Hand";
Journal of Biomechanics,
46
(2013),
5;
S. 984
- 990.
Zusätzliche Informationen
-
P. Varga, P.K. Zysset:
"Assessment of Volume Fraction and Fabric in the Distal Radius Using HR-pQCT";
Bone,
45
(2009),
5;
S. 909
- 917.
Zusätzliche Informationen
-
P. Varga, P.K. Zysset:
"Sampling Sphere Orientation Distribution: An Efficient Method to Quantify Trabecular Bone Fabric on Grayscale Images";
Medical Image Analysis,
13
(2009),
3;
S. 530
- 541.
Zusätzliche Informationen
-
C. Völlmecke, M. Todt, S. Yiatros:
"Buckling and postbuckling of architectured materials: A review of methods for lattice structures and metal foams";
Composites and Advanced Materials,
30
(2021),
S. 1
- 12.
-
M. von Danwitz, P. Antony, F. Key, N. Hosters, M. Behr:
"Four-dimensional elastically deformed simplex space-time meshes for domains with time-variant topology";
International Journal for Numerical Methods in Fluids,
93
(2021),
12;
S. 3490
- 3506.
-
W.K. Vonach, F. G. Rammerstorfer:
"A General Approach to the Wrinkling Instability of Sandwich Plates";
Structural Engineering and Mechanics,
12
(2001),
4;
S. 363
- 376.
Zusätzliche Informationen
-
W.K. Vonach, F. G. Rammerstorfer:
"The Effects of In-Plane Core Stiffness on the Wrinkling Behavior of Thick Sandwiches";
Acta Mechanica,
141
(2000),
1-2;
S. 1
- 10.
Zusätzliche Informationen
-
W.K. Vonach, F. G. Rammerstorfer:
"Wrinkling of Thick Orthotropic Sandwich Plates under General Loading Conditions";
Archive of Applied Mechanics,
70
(2000),
5;
S. 338
- 348.
Zusätzliche Informationen
-
X. Wang, F. G. Rammerstorfer:
"Coupling Effects in Linear Stress and Buckling Analysis by the Finite Strip Method";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik,
74
(1994),
6;
S. 712
- 714.
-
X. Wang, F. G. Rammerstorfer:
"Determination of Effective Breadth and Effective Width of Stiffened Plates by Finite Strip Analyses";
Thin-Walled Structures,
26
(1996),
4;
S. 261
- 286.
Zusätzliche Informationen
-
A. Weck, J. Segurado, J. LLorca, D. Wilkinson, H. J. Böhm:
"Numerical Simulations of Void Coalescence in Model Materials Using a Nonlocal Ductile Damage Approximation";
International Journal of Fracture,
148
(2007),
3;
S. 205
- 219.
Zusätzliche Informationen
-
R. Weinmüllner, B. Zbiral, A. Becirovic, E.M. Stelzer, F. Nagelreiter, M. Schosserer, I. Lämmermann, L. Liendl, M. Lang, L. Terlecki-Zaniewicz, O.G. Andriotis, M. Mildner, B. Golabi, P. Waidhofer-Söllner, K. Schedle, G. Emsenhuber, P.J. Thurner, E. Tschachler, F. Gruber, J. Grillari:
"Organotypic human skin culture models constructed with senescent fibroblasts show hallmarks of skin aging";
npj Aging and Mechanisms of Disease,
6
(2020),
4 (2020).
-
E. Weissenbek, H. J. Böhm, F. G. Rammerstorfer:
"Micromechanical Investigations of Arrangement Effects in Particle Reinforced Metal Matrix Composites";
Computational Materials Science,
3
(1994),
2;
S. 263
- 278.
Zusätzliche Informationen
-
E. Weissenbek, H. E. Pettermann, S. Suresh:
"Elasto-Plastic Deformation in Compositionally Graded Metal-Ceramic Structures";
Acta Materialia,
45
(1997),
8;
S. 3401
- 3417.
Zusätzliche Informationen
-
E. Weissenbek, F. G. Rammerstorfer:
"Influence of the Fiber Arrangement on the Mechanical and Thermo-Mechanical Behavior of Short-Fiber Reinforced MMCs";
Acta Metallurgica et Materialia,
41
(1993),
10;
S. 2833
- 2843.
Zusätzliche Informationen
-
P. Weninger, E. Dall´Ara, H. Drobetz, A. Nemec, H. Redl, H. Hertz, P.K. Zysset:
"Multidirectional Volar Fixed-Angle plating Using Cancellous Locking Screws for Distal Radius Fractures - Evaluation of Three Screw Configurations in an Extra-Articular Fracture Model";
Wiener Klinische Wochenschrift,
123
(2011),
S. 4
- 10.
Zusätzliche Informationen
-
P. Weninger, E. Dall´Ara, M. Leixnering, C. Pezzei, H. Hertz, H. Drobetz, H. Redl, P.K. Zysset:
"Volar Fixed-Angle Plating of Extra-Articular Distal Radius Fractures - A Biomechanical Analysis Comparing Threaded Screws and Smooth Pegs";
Journal of Trauma-Injury Infection and Critical Care,
69
(2010),
5;
S. E46
- E55.
Zusätzliche Informationen
-
B. Werner, O. Červinek, D. Koutný, A.G. Reisinger, H. E. Pettermann, M. Todt:
"Numerical and experimental study on the collapse of a triangular cell under compression";
International Journal of Solids and Structures,
236-237
(2022),
S. 111295.
-
B. Werner, M. Ovesy, P.K. Zysset:
"An explicit micro‐FE approach to investigate the post‐yield behaviour of trabecular bone under large deformations";
International Journal for Numerical Methods in Biomedical Engineering,
35
(2019),
(5) e3188;
16 S.
Zusätzliche Informationen
-
B. Werner, M. Todt, H. E. Pettermann:
"Nonlinear Finite Element Study of Beams with Elasto‐Plastic Damage Behavior in the Post‐Buckling Regime";
PAMM,
19
(2019),
1;
2 S.
-
E. Werner, H. J. Böhm, W. Prantl, F. G. Rammerstorfer:
"Plasticity and Damage of a Fiber Reinforced Aluminum Alloy: Experiments and Micromechanical Modeling";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik,
78
(1998),
Supplement 1;
S. 77
- 80.
-
G. Wimmer, W. Kitzmüller, G. Pinter, T. Wettemann, H. E. Pettermann:
"Computational and Experimental Investigation of Delamination in L-Shaped Laminated Composite Components";
Engineering Fracture Mechanics,
76
(2009),
18;
S. 2810
- 2820.
Zusätzliche Informationen
-
G. Wimmer, H. E. Pettermann:
"A Semi-Analytical Model for the Simulation of Delamination in Laminated Composites";
Composites Science and Technology,
68
(2008),
12;
S. 2332
- 2339.
Zusätzliche Informationen
-
G. Wimmer, H. E. Pettermann:
"Prediction of Delamination Growth in Laminated Structures Loaded by Quasi-Static and Cyclic Loads";
Journal of Composite Materials,
43
(2009),
12;
S. 3303
- 3324.
Zusätzliche Informationen
-
G. Wimmer, C. Schuecker, H. E. Pettermann:
"Numerical Simulation of Delamination in Laminated Composite Components - A Combination of a Strength Criterion and Fracture Mechanics";
Composites - Part B: Engineering,
40
(2009),
2;
S. 158
- 165.
Zusätzliche Informationen
-
G. Wimmer, C. Schuecker, H. E. Pettermann:
"Numerical Simulation of Delamination Onset and Growth in Laminated Composites";
The e-Journal of Nondestructive Testing,
11
(2006),
12;
10 S.
Zusätzliche Informationen
-
M. Wolfahrt, J. Cichosz, J. Gager, M. Fleischmann:
"Materialmodellierung von kohlenstofffaserverstärkten Geflechtlaminaten";
lightweightdesign,
2013
(2013),
06;
S. 42
- 47.
Zusätzliche Informationen
-
U. Wolfram, T. Gross, D. H. Pahr, J.J. Schwiedrzik, H.J. Wilke, P.K. Zysset:
"Fabric-Based Tsai-Wu Yield Criteria for Vertebral Trabecular Bone in Stress and Strain Space";
Journal of the Mechanical Behavior of Biomedical Materials,
15
(2012),
S. 218
- 228.
Zusätzliche Informationen
-
U. Wolfram, H.J. Wilke, P.K. Zysset:
"Damage Accumulation in Vertebral Trabecular Bone Depens on Loading Mode and Direction";
Journal of Biomechanics,
44
(2011),
6;
S. 1164
- 1169.
Zusätzliche Informationen
-
U. Wolfram, H.J. Wilke, P.K. Zysset:
"Rehydration of Vertebral Trabecular Bone: Influences on its Anisotropy, its Stiffness and the Indentation Work with a View to Age, Gender and Vertebral Level";
Bone,
46
(2010),
2;
S. 348
- 354.
Zusätzliche Informationen
-
U. Wolfram, H.J. Wilke, P.K. Zysset:
"Transverse Isotropic Elastic Properties of Vertebral Trabecular Bone Matrix Measured Using Microindentation (Effects of Age, Gender and Vertebral Level)";
Journal of Mechanics in Medicine and Biology,
44
(2009),
S2;
S. 392
- 393.
-
U. Wolfram, H.J. Wilke, P.K. Zysset:
"Transverse Isotropic Elastic Properties of Vertebral Trabecular Bone Matrix Measured Using Microindentation under Dry Conditions (Effects of Age, Gender, and Vertebral Level)";
Journal of Mechanics in Medicine and Biology,
10
(2010),
1;
S. 139
- 150.
Zusätzliche Informationen
-
U. Wolfram, H.J. Wilke, P.K. Zysset:
"Valid μ Finite Element Models of Vertebral Trabecular Bone can be Obtained Using Tissue Properties Measured with Nanoindentation under Wet Conditions";
Journal of Biomechanics,
43
(2010),
9;
S. 1731
- 1737.
Zusätzliche Informationen
-
L. Zupancic Cepic, M. Frank, A.G. Reisinger, B. Sagl, D. H. Pahr, W. Zechner, A. Schedle:
"Experimental validation of a micro-CT finite element model of a human cadaveric mandible rehabilitated with short-implant-supported partial dentures";
Journal of the Mechanical Behavior of Biomedical Materials,
126
(2022),
105033;
S. 1
- 10.
-
F. Zwicke, T. Hohlweck, C. Hopmann, S. Elgeti:
"Inverse Design Based on Nonlinear Thermoelastic Material Models";
PAMM,
20
(2021),
1;
3 S.
-
P.K. Zysset:
"Indentation of Bone Tissue: A Short Review";
Osteoporosis International,
20
(2009),
6;
S. 1049
- 1055.
Zusätzliche Informationen
-
P.K. Zysset, E. Dall´Ara, P. Varga, D. H. Pahr:
"Finite Element Analysis for Prediction of Bone Strength";
BoneKey Reports,
2
(2013),
386.
Zusätzliche Informationen
-
P.K. Zysset, D. H. Pahr, K. Engelke, H.K. Genant, M.R. McClung, D.L. Kendler, C. Recknor, M. Kinzl, J.J. Schwiedrzik, O. Museyko, A. Wang, C. Libanati:
"Comparison of Proximal Femur and Vertebral Body Strength Improvements in the FREEDOM Trial Using an Alternative Finite Element Methodology";
Bone,
81
(2015),
S. 122
- 130.
Zusätzliche Informationen
Editorials in wiss. Zeitschriften
-
J. Eberhardsteiner, H.A. Mang, Franz Rammerstorfer:
"Special Issue of the Fifth World Congress on Computational Mechanics";
International Journal for Numerical Methods in Engineering,
60
(2004),
1;
S. 1
- 427.
Buchbeiträge
-
W. Auli, F. G. Rammerstorfer:
"On the Dynamic Instability of Shell Structures - Criteria and Algorithms";
in: "Finite Element Methods for Plate and Shell Structures",
T.J.R. Hughes, E. Hinton (Hrg.);
Pineridge Press,
Swansea U.K.,
1986,
S. 58
- 82.
-
F.G. Barth, H.E. Dechant:
"Arthropod Cuticular Hairs: Tactile Sensors and the Refinement of Stimulus Transformation";
in: "Sensors and Sensing in Biology and Engineering",
F.G. Barth, J.A.C. Humphrey, T.W. Secomb (Hrg.);
Springer-Verlag,
Wien,
2003,
ISBN: 3-211-83771-x,
S. 159
- 171.
-
H. J. Böhm:
"A Short Introduction to Continuum Micromechanics";
in: "Mechanics of Microstructured Materials",
H. J. Böhm (Hrg.);
herausgegeben von: CISM;
Springer-Verlag,
Wien,
2004,
ISBN: 3-211-24154-x,
S. 1
- 40.
Zusätzliche Informationen
-
H. J. Böhm:
"Description of Thermoelastic Composites by a Mean Field Approach";
in: "Engineering Mechanics of Fibre Reinforced Polymers and Composite Structures"",
J. Hult, F. G. Rammerstorfer (Hrg.);
Springer-Verlag,
Wien,
1994,
ISBN: 3-211-82652-1,
S. 51
- 72.
-
H. J. Böhm:
"Micromechanics";
in: "Encyclopedia of Continuum Mechanics",
H. Altenbach, A. Öchsner (Hrg.);
Springer,
Berlin, Heidelberg,
2018,
ISBN: 978-3-662-53605-6,
8 S.
-
H. J. Böhm:
"Modeling the Mechanical Behavior of Short Fiber Reinforced Composites";
in: "Mechanics of Microstructured Materials",
H. J. Böhm (Hrg.);
herausgegeben von: CISM;
Springer-Verlag,
Wien,
2004,
ISBN: 3-211-24154-x,
S. 41
- 56.
Zusätzliche Informationen
-
H. J. Böhm, D. H. Pahr, T. Daxner:
"Analytical and Numerical Methods for Modeling the Thermomechanical and Thermophysical Behavior of Microstructured Materials";
in: "Computational and Experimental Mechanics of Advanced Materials",
V.V. Silberschmidt (Hrg.);
herausgegeben von: CISM;
Springer-Verlag,
Wien,
2009,
ISBN: 978-3-211-99684-3,
S. 167
- 223.
Zusätzliche Informationen
-
H. J. Böhm, H. E. Pettermann, S. Nogales:
"Continuum Modeling of Diffusive Transport in Inhomogeneous Solids";
in: "Heat Transfer in Multi-Phase Materials",
A. Öchsner, G.E. Murch (Hrg.);
Springer-Verlag,
Berlin,
2011,
ISBN: 978-3642044021,
S. 3
- 32.
Zusätzliche Informationen
-
C.J. Collins, O.G. Andriotis, V. Nedelkovski, M. Frank, O.L. Katsamenis, P.J. Thurner:
"Bone Micro- and Nanomechanics";
in: "Encyclopedia of Biomedical Engineering",
2;
R Narayan (Hrg.);
Elsevier,
2019,
ISBN: 9780128048290,
S. 22
- 44.
-
T. Daxner:
"Finite Element Modeling of Cellular Metals";
in: "Cellular and Porous Materials in Structures and Processes",
H. Altenbach, A. Öchsner (Hrg.);
herausgegeben von: CISM;
Springer-Verlag,
Wien,
2010,
ISBN: 978-3-7091-0296-1,
S. 47
- 106.
Zusätzliche Informationen
-
T. Daxner, H. J. Böhm, F. G. Rammerstorfer, M. Seitzberger:
"Modeling of Cellular Materials";
in: "Handbook of Cellular Metals",
H.P. Degischer, B. Kriszt (Hrg.);
Wiley-VCH,
Weinheim,
2002,
ISBN: 3-527-30339-1,
S. 245
- 280.
-
T. Daxner, D. H. Pahr, F. G. Rammerstorfer:
"Micro- and Meso-Instabilities in Structured Materials and Sandwich Structures";
in: "Buckling and Postbuckling Structures: Experimental, Analytical and Numerical Studies",
B. G. Falzon, M. H. Aliabadi (Hrg.);
Imperial College Press,
London,
2008,
ISBN: 1860947948,
S. 453
- 495.
Zusätzliche Informationen
-
F.D. Fischer, E. Hinteregger, F. G. Rammerstorfer:
"A Computational Study of the Residual Stress Distribution in Thermally Loaded Beams of Arbitrary Cross-Section on Frictional Support";
in: "Nonlinear Computational Mechanics - State of the Art",
P. Wriggers, W. Wagner (Hrg.);
Springer-Verlag,
Berlin,
1991,
S. 737
- 780.
-
F.D. Fischer, F. G. Rammerstorfer, K. Scharf:
"Earthquake Resistant Design of Anchored and Unanchored Liquid Storage Tanks Under Three-Dimensional Earthquake Excitation";
in: "Structural Dynamics - Recent Advances",
G.I. Schueller (Hrg.);
Springer-Verlag,
Wien,
1991,
S. 317
- 371.
-
T. Flatscher, T. Daxner, D. H. Pahr, F. G. Rammerstorfer:
"Optimization of Corrugated Paperboard under Local and Global Buckling Constraints";
in: "Multiscale Methods in Computational Mechanics",
R. de Borst, E. Ramm (Hrg.);
Springer-Verlag,
Dordrecht,
2011,
ISBN: 978-90-481-9808-5,
S. 329
- 346.
Zusätzliche Informationen
-
N. Friedl, F. G. Rammerstorfer, F.D. Fischer:
"On the Buckling of Plates Under Global Tension";
in: "Advances in Finite Element Procedures and Technigues",
B.H.V. Topping (Hrg.);
Civil Comp Press,
Edinburgh,
1998,
S. 73
- 77.
-
M.A. Hartmann, M. Todt, F. G. Rammerstorfer:
"Atomistic and Continuum Modelling of Graphene and Graphene-Derived Carbon Nanostructures";
in: "Structure and Multiscale Mechanics of Carbon Nanomaterials",
O. Paris (Hrg.);
Springer-Verlag,
Wien,
2016,
ISBN: 978-3-7091-1885-6,
S. 135
- 179.
Zusätzliche Informationen
-
H. E. Pettermann, C. Schuecker:
"Damage and Failure in Layered Composite Structures";
in: "Encyclopedia of Continuum Mechanics",
H. Altenbach, A. Öchsner (Hrg.);
Springer,
Berlin, Heidelberg,
2020,
ISBN: 978-3-662-55771-6,
11 S.
-
F. G. Rammerstorfer:
"Jump Phenomena Associated with the Stability of Geometrically Nonlinear Structures";
in: "Recent Advances in Nonlinear Computational Mechanics",
E. Hinton, D.R.J. Owen, C. Taylor (Hrg.);
Pineridge Press,
Swansea U.K.,
1982,
ISBN: 0906674190,
S. 119
- 153.
-
F. G. Rammerstorfer, H. J. Böhm:
"Finite Elements in Micromechanics of Composite and Foam Materials";
in: "Computational Mechanics for the Twenty-First Century",
B.H.V. Topping (Hrg.);
Saxe-Coburg Publications,
Edinburgh,
2000,
ISBN: 1-874672-13-x,
S. 145
- 164.
-
F. G. Rammerstorfer, H. J. Böhm:
"Micromechanics for Macroscopic Material Description of FRPs";
in: "Engineering Mechanics of Fibre Reinforced Polymers and Composite Structures",
J. Hult, F. G. Rammerstorfer (Hrg.);
herausgegeben von: CISM Courses and Lectures No. 348;
Springer-Verlag,
Wien New York,
1994,
S. 9
- 49.
-
F. G. Rammerstorfer, T. Daxner:
"Berechnungs- und Design-Konzepte für den Leichtbau";
in: "Leichtbau",
H.P. Degischer, S. Lüftl (Hrg.);
Wiley-VCH,
Weinheim,
2009,
ISBN: 978-3-527-32372-2,
S. 14
- 49.
-
F. G. Rammerstorfer, T. Daxner, H. J. Böhm:
"Modeling and Simulation - Introduction";
in: "Handbook of Cellular Metals",
H.P. Degischer, B. Kriszt (Hrg.);
Wiley-VCH,
Weinheim,
2002,
ISBN 3-527-39339-1,
S. 243
- 245.
-
F. G. Rammerstorfer, K. Dorninger, A. Starlinger:
"Composite and Sandwich Shells";
in: "Nonlinear Analysis of Shells by Finite Elements",
F. G. Rammerstorfer (Hrg.);
herausgegeben von: CISM Courses and Lectures No.328;
Springer-Verlag,
Wien New York,
1992,
ISBN: 3-211-82416-2,
S. 131
- 194.
-
F. G. Rammerstorfer, K. Dorninger, A. Starlinger:
"Nonlinear Finite Element Analysis of Composite and Sandwich Shell Structures";
in: "Nonlinear Computational Mechanics - State of the Art",
P. Wriggers, W. Wagner (Hrg.);
Springer-Verlag,
Berlin,
1991,
S. 332
- 359.
-
F. G. Rammerstorfer, K. Dorninger, A. Starlinger, I.C. Skrna-Jakl:
"Computational Methods in Composite Analysis and Design";
in: "Engineering Mechanics of Fibre Reinforced Polymers and Composite Structures",
J. Hult, F. G. Rammerstorfer (Hrg.);
herausgegeben von: CISM Courses and Lectures No. 348;
Springer-Verlag,
Wien New york,
1994,
ISBN: 3-211-82652-1,
S. 209
- 231.
-
F. G. Rammerstorfer, F.D. Fischer, N. Friedl, T. Daxner:
"Instabilities Resulting from the Production Process of Plates and Shells";
in: "Innovation in Computational Strcutures Technology",
B.H.V. Topping, G. Montero, R. Montenegro (Hrg.);
Saxe-Coburg Publications,
Stirlingshire,
2006,
ISBN: 1-874672-27-x,
S. 205
- 223.
Zusätzliche Informationen
-
F. G. Rammerstorfer, F.D. Fischer, E.T. Till, W. Mitter, O. Gründler:
"The Influence of Creep and Transformation Plasticity in the Analysis of Stresses Due to Heat-Treatment";
in: "Numerical Methods in Heat Transfer",
R.W. Lewis, K. Morgan, B.A. Schrefler (Hrg.);
J.Wiley & Sons,
Chichester,
1983,
S. 447
- 459.
-
F. G. Rammerstorfer, B. Hößl, H.E. Dechant, H. J. Böhm, F.G. Barth:
"Computational Biomechanics of Sensory Organs in Spiders";
in: "Trends in Engineering Computational Technology",
B.H.V. Topping, M. Papadrakakis (Hrg.);
Saxe-Coburg Publications,
2008,
ISBN: 978-1-874672-36-4,
S. 321
- 334.
-
F. G. Rammerstorfer, I.C. Skrna-Jakl:
"Fracture Mechanics in Lightweight Design";
in: "Encyclopedia of Continuum Mechanics",
H. Altenbach, A. Öchsner (Hrg.);
Springer,
Berlin, Heidelberg,
2018,
ISBN: 978-3-662-53605-6,
7 S.
-
F. G. Rammerstorfer, I.C. Skrna-Jakl:
"Methods of Plasticity Theory in Lightweight Design";
in: "Encyclopedia of Continuum Mechanics",
H. Altenbach, A. Öchsner (Hrg.);
Springer,
Berlin, Heidelberg,
2019,
ISBN: 978-3-662-53605-6,
11 S.
-
F. G. Rammerstorfer, I.C. Skrna-Jakl:
"Shear Web Theory";
in: "Encyclopedia of Continuum Mechanics",
H. Altenbach, A. Öchsner (Hrg.);
Springer,
Berlin, Heidelberg,
2018,
ISBN: 978-3-662-53605-6,
7 S.
-
F. G. Rammerstorfer, A. Starlinger:
"Lamination Theory and Failure Mechanisms in Composite Shells";
in: "Engineering Mechanics of Fibre Rein-forced Polymers and Composite Structures",
J. Hult, F. G. Rammerstorfer (Hrg.);
herausgegeben von: CISM Courses and Lectures No. 348;
Springer-Verlag,
Wien New York,
1994,
ISBN: 3-211-82652-1,
S. 73
- 110.
-
T.J. Reiter, F. G. Rammerstorfer, H. J. Böhm:
"Numerical Simulation of Internal and Surface Bone Remodelling";
in: "Engineering Optimization in Design Processes",
H.A. Eschenauer, C. Matthek, N. Olhoff (Hrg.);
herausgegeben von: Lecture Notes in Engineering, 63;
Springer-Verlag,
Berlin,
1991,
S. 333
- 340.
-
J. Rodriguez, J. Weinbub, D. Pahr, K. Rupp, S. Selberherr:
"Distributed High-Performance Parallel Mesh Generation with ViennaMesh";
in: "Applied Parallel and Scientific Computing, Lecture Notes in Computer Science",
7782;
P. Manninen, P. Öster (Hrg.);
Springer Berlin Heidelberg,
2013,
ISBN: 978-3-642-36802-8,
S. 548
- 552.
Zusätzliche Informationen
-
C. Schuecker, H. E. Pettermann:
"Combining Elastic Brittle Damage with Plasticity to Model the Non-Linear Behavior of Fiber Reinforced Laminates";
in: "Mechanical Response of Composites",
P.P. Camanho, C.G. Dávila, S.T. Pinho, J.J.C. Remmers (Hrg.);
Springer-Verlag,
Berlin,
2008,
ISBN: 978-1-4020-8583-3,
S. 99
- 117.
Zusätzliche Informationen
-
E. Sim, T.J. Reiter, W. Freimüsser, F. G. Rammerstorfer:
"Untersuchungen zu den Spannungsverteilungen im kranialen Femur nach Stabilisierung einer pertrochantären Modellfraktur unter Verwendung der Finite-Elemente-Methode: Ein Vergleich zweier Implantate";
in: "Der Gamma-Nagel - Standortbestimmung nach den ersten zehn Jahren",
R.H. Gahr, K.-S. Leung, ;.P. Rosenwasser, W. Roth (Hrg.);
Einhorn-Presse Verlag GmbH, Reinbek,
Reinbek,
1998,
S. 293
- 300.
-
I.C. Skrna-Jakl:
"Polymermatrix-Verbundwerkstoffe";
in: "Leichtbau",
H.P. Degischer, S. Lüftl (Hrg.);
Wiley-VCH,
Weinheim,
2009,
ISBN: 978-3-527-32372-2,
S. 105
- 138.
-
I.C. Skrna-Jakl, F. G. Rammerstorfer:
"Macromechanics of Laminates";
in: "Encyclopedia of Continuum Mechanics",
H. Altenbach, A. Öchsner (Hrg.);
Springer,
Berlin, Heidelberg,
2019,
ISBN: 978-3-662-53605-6,
10 S.
-
J. Stampfl, H. E. Pettermann, R. Liska:
"Bioinspired Cellular Structures: Additive Manufacturing and Mechanical Properties";
in: "Biomimetics - Materials, Structures and Processes",
P. Gruber, D. Bruckner, Ch. Hellmich, H. Schmiedmayer, H. Stachelberger, I. Gebeshuber (Hrg.);
Springer-Verlag,
Berlin,
2011,
ISBN: 978-3642119330,
S. 105
- 123.
Zusätzliche Informationen
-
J. Stampfl, H. E. Pettermann, M.H. Luxner:
"Fabrication and Characterization in the Micro-Nano Range";
in: "Fabrication and Characterization in the Micro/Nano Range",
F. Lasagni, A. Lasagni (Hrg.);
Springer-Verlag,
Berlin,
2011,
ISBN: 978-3-642-17781-1,
S. 95
- 117.
Zusätzliche Informationen
-
M. Todt, F. G. Rammerstorfer:
"Analytical Stability Considerations in Lightweight Design";
in: "Encyclopedia of Continuum Mechanics",
H. Altenbach, A. Öchsner (Hrg.);
Springer,
Berlin, Heidelberg,
2018,
ISBN: 978-3-662-53605-6,
12 S.
-
F. Ziegler, F. G. Rammerstorfer:
"Thermoelastic Stability";
in: "Thermal Stresses III",
R.B. Hetnarski (Hrg.);
Elsevier Science Publishers B.V.,
Amsterdam,
1989,
S. 107
- 189.
-
F. Zwicke, S. Elgeti:
"Inverse Design Method for Injection Molding Cavity Shapes";
in: "Enhanced Material, Parts Optimization and Process Intensification. EMPOrIA 2020. Lecture Notes in Mechanical Engineering",
U. Reisgen, D. Drummer, H. Marschall (Hrg.);
Springer,
2021,
ISBN: 978-3-030-70331-8,
S. 256
- 263.
Beiträge in Tagungsbänden
-
H. J. Böhm:
"Kontinuumsmodelle zur Beschreibung des thermomechanischen Verhaltens diskontinuierlich verstärkter Materialien";
in: "Verbundwerkstoffe",
H.P. Degischer (Hrg.);
herausgegeben von: DGM;
Wiley-VCH,
Weinheim,
2003,
ISBN: 3-527-30762-1,
S. 45
- 54.
Zusätzliche Informationen
-
H. J. Böhm, C.M. Chimani, H. E. Pettermann, A.F. Plankensteiner, F. G. Rammerstorfer:
"Multiscale Treatment of Inhomogeneous Materials by Finite Elements";
in: "Discretization Methods in Structural Mechanics",
H.A. Mang, F. G. Rammerstorfer (Hrg.);
Kluwer Academic Publishers,
Dordrecht,
1999,
ISBN: 978-0-7923-5591-5,
S. 257
- 264.
-
H. J. Böhm, T. Drabek, A. Eckschlager:
"Continuum Mechanical Unit Cell Models for Studying the Thermomechanical Behavior of High Speed Tool Steels";
in: "The Use of Tool Steels: Experience and Research",
J. Bergström, G. Fredriksson, M. Johansson, O. Kotik, F. Thuvander (Hrg.);
Karlstad University,
Karlstad, Sweden,
2002,
ISBN: 91-89422-81-3,
S. 415
- 424.
Zusätzliche Informationen
-
H. J. Böhm, A. Eckschlager, W. Han, F. G. Rammerstorfer:
"3/D Arrangement Effects in Particle Reinforced Metal Matrix Composites";
in: "Plastic and Viscoplastic Response of Materials and Metal Forming",
A.S. Khan, H. Zhang, Y. Yuan (Hrg.);
NEAT Press,
Fulton, MD,
2000,
S. 466
- 468.
-
H. J. Böhm, F. G. Rammerstorfer:
"Influence of the Micro-Arrangement on Matrix and Fiber Damage in Continuously Reinforced MMCs";
in: "Micromechanics of Plasticity and Damage of Multiphase Materials",
A. Pineau, A. Zaoui (Hrg.);
Kluwer Academic Publishers,
Dordrecht,
1996,
ISBN: 978-0-7923-4188-8,
S. 19
- 26.
-
T. Brynk, Ch. Hellmich, A. Fritsch, P.K. Zysset, J. Eberhardsteiner:
"Experimental Poromechanics of Trabecular Bone Strength: Role of Terzaghi's Effective Stress and of Tissue Level Stress Fluctuations";
in: "Tagungsband 4. Wiener Biomaterialsymposium",
TU Wien,
Wien,
2010,
S. 27.
-
T. Brynk, Ch. Hellmich, A. Fritsch, P.K. Zysset, J. Eberhardsteiner:
"Role of Terzaghi's Effective Stress in Experimental Poromechanics of Trabecular Bone Strength";
in: "2010 Engineering Mechanics Institute Conference, Book of Abstracts",
Engineering Mechanics Institute,
2010,
S. 42.
-
V.A. Buryachenko, H. J. Böhm, F. G. Rammerstorfer:
"Modeling the Overall Elastoplastic Behavior of Multiphase Materials by the Effective Field Method";
in: "Micromechanics of Plasticity and Damage of Multiphase Materials",
A. Pineau, A. Zaoui (Hrg.);
Kluwer Academic Publishers,
Dordrecht,
1996,
ISBN: 978-0-7923-4188-8,
S. 35
- 42.
-
V.A. Buryachenko, F. G. Rammerstorfer:
"Micromechanics and Nonlocal Effects in Graded Random Structure Matrix Composites";
in: "Transformation Problems in Composite and Active Materials",
Y.A. Bahei-el-Din, G.J. Dvorak (Hrg.);
Kluwer Academic Publishers,
Dordrecht,
1998,
ISBN: 978-0-7923-5122-1,
S. 197
- 206.
-
C.M. Chimani, H. J. Böhm, F. G. Rammerstorfer, C. Hausmann:
"Free Edge Effects at Interfaces in Selectively Reinforced Structures";
in: "Damage and Failure of Interfaces",
Hp Rossmanith (Hrg.);
A.A. Balkema,
Rotterdam,
1997,
ISBN: 90-5410-899-1,
S. 91
- 98.
-
T. Daxner, R.D. Bitsche, H. J. Böhm:
"Micromechanical Models of Metallic Sponges with Hollow Struts";
in: "Thermec 2006, Materials Science Forum Vols. 539-543",
T. Chandra, K. Tsuzaki, C. Ravindran, M. Militzer (Hrg.);
Trans Tech Publications Ltd.,
Zürich,
2007,
ISBN: 0-87849-428-6,
S. 1857
- 1862.
Zusätzliche Informationen
-
T. Daxner, R.D. Bitsche, H. J. Böhm:
"Space-Filling Polyhedra as Mechanical Models for Solidified Dry Foam";
in: "Porous Metals and Metal Foaming Technology",
H. Nakajima, N. Kanetake (Hrg.);
The Japan Institute of Metals,
Sendai,
2006,
ISBN: 4-88903-405-6,
S. 441
- 446.
Zusätzliche Informationen
-
T. Daxner, H. J. Böhm, F. G. Rammerstorfer:
"Influence of Micro- and Meso-Topological Properties on the Crash-Worthiness of Aluminium Foams";
in: "Metal Foams and Porous Metal Structures",
J. Banhart, M.F. Ashby, N. A. Fleck (Hrg.);
Verlag MIT Publishing,
Bremen,
1999,
S. 283
- 288.
-
T. Daxner, H. J. Böhm, F. G. Rammerstorfer:
"Numerical Investigation of Local Yielding in Metallic Foams";
in: "Cellular Metals - Manufacture, Properties, Applications",
J. Banhart, N. A. Fleck, A. Mortensen (Hrg.);
Verlag MIT Publishing,
Bremen,
2003,
ISBN: 3-935538-12-x,
S. 413
- 418.
-
T. Daxner, M.H. Luxner, F. G. Rammerstorfer:
"Thermo-Mechanically Interacting Composite Pipes Optimised by Genetic Algorithms";
in: "Proceedings of the 11th European Conference on Composite Materials",
European Society of Composite Materials,
London,
2004,
Paper-Nr. C041,
10 S.
Zusätzliche Informationen
-
T. Daxner, F. G. Rammerstorfer, F.D. Fischer:
"Simulation of Instability Phenomena During the Conical Expansion of a Pipe";
in: "Proceedings der ABAQUS Austria Anwenderkonferenz 2003",
ABAQUS Austria,
Wien,
2003.
Zusätzliche Informationen
-
T. Daxner, F. G. Rammerstorfer, F.D. Fischer:
"Simulation of Material and Structural Instability Phenomena During the Flaring Process of Cylindrical Shells";
in: "Proceedings of the NUMIFORM 2004",
S. Ghosh, J.M. Castro, J.K. Lee (Hrg.);
American Institute of Physics,
Melville, NY,
2004,
ISBN: 0-7354-0189-6,
Paper-Nr. N119,
6 S.
Zusätzliche Informationen
-
T. Daxner, R.W. Tomas:
"Mechanical Properties of Semi-Expanded Hollow Sphere Structures";
in: "IUTAM Symposium on Mechanical Properties of Cellular Materials",
H. Zhao, N. A. Fleck (Hrg.);
herausgegeben von: IUTAM;
Springer-Verlag,
Berlin,
2009,
ISBN: 978-1-4020-9403-3,
S. 87
- 95.
Zusätzliche Informationen
-
T. Daxner, R.W. Tomas, R.D. Bitsche:
"Mechanics of Semi-Expanded Hollow Sphere Foams";
in: "MetFoam 2007 - Porous Metals and Metallic Foams",
L.P. Lefebvre, J. Banhart, D. Dunand (Hrg.);
DEStech,
Lancaster, PA,
2008,
ISBN: 978-1-932078-28-2,
S. 169
- 172.
Zusätzliche Informationen
-
H.P. Degischer, F. G. Rammerstorfer, O. Beffort:
"Design Rules for Selective Reinforcement of Mg Castings by MMC Inserts";
in: "Magnesium Alloys and their Applications",
K. Kainer (Hrg.);
Wiley-VCH,
Weinheim,
2000,
ISBN: 97-83527309-75-7,
S. 207
- 214.
-
T. Drabek, H. J. Böhm:
"Simulation of Ductile Damage in Metal Matrix Composites";
in: "Proceedings of the NUMIFORM 2004",
S. Ghosh, J.M. Castro, J.K. Lee (Hrg.);
American Institute of Physics,
Melville, NY,
2004,
ISBN: 0-7354-0189-6,
Paper-Nr. N064,
6 S.
Zusätzliche Informationen
-
T. Drabek, H. J. Böhm:
"Unit Cell Studies of Ductile Damage in Fiber Reinforced Metal Matrix Composites";
in: "Proceedings of ECCOMAS 2004",
P. Neittaanmäki, M. Rossi, K. Majava, O. Pironneau (Hrg.);
herausgegeben von: ECCOMAS;
University of Jyväskylä,
Jyväskylä,
2004,
ISBN: 951-39-1868-8,
Paper-Nr. 94,
13 S.
Zusätzliche Informationen
-
D. Duschlbauer, H. E. Pettermann:
"Numerical Simulation of Composite Materials by Multi-Fiber Unit Cells";
in: "Proceedings of the 21st CAD-FEM User's Meeting 2003",
CADFEM GmbH,
Grafing,
2003,
ISBN: 3-937523-00-6,
6 S.
-
D. Duschlbauer, H. E. Pettermann, H. J. Böhm:
"Rechnerische Simulation der Wärmeleitungseigenschaften von MMCs mit spezieller Berücksichtigung eines thermischen Widerstandes am Interface";
in: "Verbundwerkstoffe",
H.P. Degischer (Hrg.);
herausgegeben von: DGM;
Wiley-VCH,
Weinheim,
2003,
ISBN: 3-527-30762-1,
S. 555
- 562.
-
S.-J. Estermann, St. Scheiner:
"Multiscale Modeling Provides Differentiated Insights to Fluid Flow-Driven Stimulation of Bone Cellular Activities";
in: "Book of Abstract of the 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019)",
TU Verlag,
2019,
ISBN: 978-3-903024-84-7,
S. 104.
-
N. Friedl:
"Membrane Structures in Unsteady Potential";
in: "Proceedings of the Fifth World Congress on Compuational Mechanics (WCCM V)",
H.A. Mang, F. G. Rammerstorfer, J. Eberhardsteiner (Hrg.);
TU Wien,
Wien,
2002,
ISBN: 3-9501554-0-6.
-
N. Friedl, F. G. Rammerstorfer, F.D. Fischer:
"On the Buckling of Plates under Global Tension";
in: "Computational Structures Technology IV",
B.H.V. Topping (Hrg.);
Civil Comp Press,
Edinburgh,
1998,
S. 73
- 77.
-
A. Fürlinger, M. Fleischmann, M.H. Luxner, J. Noisternig, C. Schuecker:
"FACC Analysis Tool Suite: Effizientes FEM Post-Processing von Luftfahrtstrukturen aus Faserverbundwerkstoffen";
in: "Proceedings of NAFEMS deutschsprachige Konferenz 2012",
NAFEMS,
2012,
ISBN: 978-1-874376-67-5,
S. 155
- 158.
-
R. Gradinger, M. Seitzberger, F. G. Rammerstorfer, H.P. Degischer, M. Blaimschein, C. Walch:
"Aluminium Foam Filled Steel Tubes as Composite Shock Absorbers";
in: "Metal Foams and Porous Metal Structures",
J. Banhart, M.F. Ashby, N. A. Fleck (Hrg.);
Verlag MIT Publishing,
Bremen,
1999,
S. 313
- 316.
-
M.H. Luxner, H. E. Pettermann:
"Modeling and Simulation of Highly Porous Open Cell Structures: Elasto-Plasticity and Localization Versus Disorder and Defects";
in: "IUTAM Symposium on Mechanical Properties of Cellular Materials",
H. Zhao, N. A. Fleck (Hrg.);
herausgegeben von: IUTAM;
Springer-Verlag,
Berlin,
2009,
ISBN: 978-1-4020-9403-3,
S. 125
- 134.
Zusätzliche Informationen
-
M.H. Luxner, J. Stampfl, A. Woesz, P. Fratzl, H. E. Pettermann:
"Influence of Structural Disorder on the Performance of 3D Open Cell Structures";
in: "Proceedings of the III European Conference on Computational Solids and Structural Mechanics",
herausgegeben von: ECCOMAS;
Associção Portuguesa de Mecânica Teórica, Aplicada e Computacional,
Lisboa,
2006,
Paper-Nr. 1752,
15 S.
Zusätzliche Informationen
-
A.Y. Matveeva, H. J. Böhm, F.W.J. van Hattum:
"Seminanalytical Stiffness Tensor Approximation for Polymers Reinforced with Curved Nanotubes";
in: "Proceedings of Composites Week at Leuven 2013 and TexComp-11 Conference",
A.W. van Vuure (Hrg.);
Katholieke Universiteit Leuven,
Leuven,
2013,
8 S.
Zusätzliche Informationen
-
C. Motz, R. Pippan, A. Ableidinger, H. J. Böhm, F. G. Rammerstorfer:
"Deformation and Fracture Behavior of Ductile Aluminium Foams in the Presence of Notches under Tensile Loading";
in: "Cellular Metals and Metal Foaming Technology",
J. Banhart, M.F. Ashby, N. A. Fleck (Hrg.);
Verlag MIT Publishing,
Bremen,
2001,
S. 299
- 304.
-
D. H. Pahr, T. Daxner, F. G. Rammerstorfer, H. J. Böhm:
"On Micro/Meso/Macro Modeling of Composite Lightweight Materials and Structures";
in: "Computational Mechanics: New Frontiers for the New Millenium",
S. Valliappan, N. Khalili (Hrg.);
Elsevier,
Amsterdam,
2001,
ISBN: 00-80439-81-0,
S. 753
- 762.
-
D. H. Pahr, C. Marte, F. G. Rammerstorfer, H. J. Böhm:
"Hierarchical Modelling of Perforated Woven Fabric Laminates";
in: "Proceedings of ECCOMAS 2004",
P. Neittaanmäki, M. Rossi, S. Korotov, E. Oñate, J. Périaux, D. Knörzer (Hrg.);
herausgegeben von: ECCOMAS;
University of Jyväskylä,
Jyväskylä,
2004,
ISBN: 951-39-1869-6,
Paper-Nr. 863,
17 S.
Zusätzliche Informationen
-
D. H. Pahr, F. G. Rammerstorfer:
"Analytical and Computational Models for Investigations of Local Buckling in Honeycomb Sandwiches";
in: "Thermec 2006, Materials Science Forum Vols. 539-543",
T. Chandra, K. Tsuzaki, C. Ravindran, M. Militzer (Hrg.);
Trans Tech Publications Ltd.,
Zürich,
2007,
ISBN: 0-87849-428-6,
S. 2467
- 2472.
Zusätzliche Informationen
-
D. H. Pahr, F. G. Rammerstorfer:
"Experimental and Numerical Determinaion of the Inter-Laminar Shear Strength for Short-Beam-Shear and Double-Lap-Shear Specimens";
in: "Proceedings of the 6th 6th International Conference on Deformation and Failure of Composites",
IOM Publications,
London,
2001,
S. 357
- 365.
-
D. H. Pahr, F. G. Rammerstorfer:
"Experimentelle und numerische Untersuchungen von perforierten Laminaten";
in: "Verbundwerkstoffe",
H.P. Degischer (Hrg.);
herausgegeben von: DGM;
Wiley-VCH,
Weinheim,
2003,
ISBN: 3-527-30762-1,
S. 563
- 568.
-
D. H. Pahr, F. G. Rammerstorfer:
"Meso-Macro Analyses of Perforated Laminates";
in: "Proceedings of the International Conference on New Challenges in Mesomechanics",
R. Pyrz, J. Schjødt-Thomsen, J. C. Rauhe, T. Thomsen, L. R. Jensen (Hrg.);
Aalborg University,
Aalborg, Denmark,
2002,
ISBN: 87-89206-59-2,
S. 147
- 154.
-
D. H. Pahr, F. G. Rammerstorfer:
"Multi-Scale Analyses of Perforated Laminates";
in: "Proceedings of the Fifth World Congress on Compuational Mechanics (WCCM V)",
H.A. Mang, F. G. Rammerstorfer, J. Eberhardsteiner (Hrg.);
TU Wien,
Wien,
2002,
ISBN: 3-9501554-0-6.
-
D. H. Pahr, F. G. Rammerstorfer:
"Multi-Scale Analyses of Perforated Laminates";
in: "Computational Analysis of Composite Lightweight Structures in Aerosapce Engineering",
R. Rolfes, J. Teßmer (Hrg.);
Institut für Strukturmechanik, DLR Braunschweig,
Braunschweig,
2003,
S. 75
- 87.
-
D. H. Pahr, F. G. Rammerstorfer, P. Rosenkranz, K. Humer, H. W. Weber:
"Numerical Investigations of Different Inter-Laminar Shear Strength Specimens";
in: "Proc. ICCE/8",
D. Hui (Hrg.);
University of New Orleans,
2001,
S. 709
- 710.
-
D. H. Pahr, C. Schuecker, F. G. Rammerstorfer, H. E. Pettermann:
"Investigations of Perforated Laminates in the Presence of Residual Stress";
in: "Proceedings of the 11th European Conference on Composite Materials",
European Society of Composite Materials,
London,
2004,
Paper-Nr. C151,
10 S.
Zusätzliche Informationen
-
H. E. Pettermann:
"Theory and Application of Non-Linear Constitutive Laws for Composite Materials within the Framework of FEM Structural Analyses";
in: "Simulating Composite: Materials and Structures",
herausgegeben von: NAFEMS;
NAFEMS Deutschland, Österreich, Schweiz,
Grafing,
2007,
ISBN: 978-1-874376-28-6.
Zusätzliche Informationen
-
H. E. Pettermann, E. Weissenbek, S. Suresh:
"Simulation of the Elasto-Plastic Deformation in Compositionally Graded Metal-Ceramic Structures: Mean-Field and Unit-Cell Approaches";
in: "Functionally Graded Materials",
M. Miyamoto, I. Shiota (Hrg.);
Elsevier,
Amsterdam,
1997,
S. 74
- 80.
-
F. G. Rammerstorfer, F.D. Fischer, T. Daxner, N. Friedl:
"On Instabilities Appearing during the Production of Plates and Shells";
in: "Proceedings of the 7th EUROMECH Solid Mechanics Conference",
J.A.C. Ambrosio, M.P.T. Silva (Hrg.);
Associção Portuguesa de Mecânica Teórica, Aplicada e Computacional,
Lissabon,
2009, (eingeladen),
S. 7
- 12.
Zusätzliche Informationen
-
F. G. Rammerstorfer, D. H. Pahr, T. Daxner, W.K. Vonach:
"Buckling in Thin Walled Macro and Meso Structures of Lightweight Materials and Material Compounds";
in: "Computational Mechanics. Proceedings of the Sixth World Congress on Computational Mechanics",
Z.H. Yao, M.W. Yuan, W.X. Zhong (Hrg.);
herausgegeben von: IACM;
Springer-Verlag,
Beijing,
2004, (eingeladen),
ISBN: 7-302-09341-5,
S. 570
- 575.
Zusätzliche Informationen
-
T.J. Reiter, G.J. Dvorak:
"Micromechanical Modeling of Functionally Graded Materials";
in: "Transformation Problems in Composite and Active Materials",
Y.A. Bahei-el-Din, G.J. Dvorak (Hrg.);
Kluwer Academic Publishers,
Dordrecht,
1998,
ISBN: 978-0-7923-5122-1,
S. 173
- 184.
-
P. Rosenkranz, D. H. Pahr, K. Humer, H. W. Weber, F. G. Rammerstorfer:
"Influence of Sample and Test Geometry on the Interlaminar Shear Strength of Fiber Reinforced Plastics under Static and Dynamic Loading at RT and 77K";
in: "Advances in Cryogenic Engineering: Proceedings of the International Cryogenic Materials Conference - ICMC, Volume 48",
B. Balachandran, D. Gubser, K.T. Hartwig (Hrg.);
American Institute of Physics,
College Park, MD,
2002,
ISBN: 0-7354-0060-1,
S. 221
- 228.
-
I. Sabirov, D. Duschlbauer, H. E. Pettermann, O. Kolednik:
"The Void Initiation near the Crack Tip in Aluminum Based Metal Matrix Composites;";
in: "Verbundwerkstoffe",
H.P. Degischer (Hrg.);
herausgegeben von: DGM;
Wiley-VCH,
Weinheim,
2003,
ISBN: 3-527-30762-1,
S. 127
- 133.
-
C. Schuecker, D. H. Pahr, H. E. Pettermann:
"Numerical Simulation of Composite Structures - First Ply Failure under Non-Proportional Loading";
in: "Multiscaling in Applied Science and Emerging Technology",
G.C. Sih, T.B. Kermanidis, S.G. Pantelakis (Hrg.);
Laboratory of Technology and Strength of Materials, University of Patras,
Patras,
2004,
S. 280
- 286.
Zusätzliche Informationen
-
C. Schuecker, H. E. Pettermann:
"A Mechanism Based Damage Meso-Model for Fiber Reinforced Laminates";
in: "Fifteenth International Conference on Composite Materials (ICCM-15) - Extended Abstracts and Papers",
V.E. Verijenko, S. Adali, E. Morosov, C.J. von Klemperer (Hrg.);
herausgegeben von: International Committee on Composite Materials;
University of KwaZulu-Natal,
Durban,
2005,
ISBN: 1-86840-589-3,
Paper-Nr. 07d,
10 S.
Zusätzliche Informationen
-
C. Schuecker, H. E. Pettermann:
"Constitutive Ply Damage Modeling, FEM Implementation, and Analyses of Laminated Structures";
in: "Proceedings of the III European Conference on Computational Solids and Structural Mechanics",
herausgegeben von: ECCOMAS;
Associção Portuguesa de Mecânica Teórica, Aplicada e Computacional,
Lisboa,
2006,
Paper-Nr. 1759,
11 S.
Zusätzliche Informationen
-
I.C. Skrna-Jakl, F. G. Rammerstorfer:
"An Analysis Concept for Investigating Global and Local Effects in Stiffened Composite Structures";
in: "Advances in Analysis and Design of Composites",
B.H.V. Topping (Hrg.);
Civil Comp Press,
Edinburgh,
1996,
S. 1
- 10.
-
J. Stampfl, M. Seyr, M.H. Luxner, H. E. Pettermann, A. Wöss, P. Fratzl:
"Regular, Low Density Cellular Structures-Rapid Prototyping, Numerical Simulation, Mechanical Testing";
in: "Biological and Bioinspired Materials and Devices (Mater. Res. Soc. Symp. Proc. 823)",
J. Aizenberg, W.J. Landis, C. Orme, R. Wang (Hrg.);
herausgegeben von: MRS;
Materials Research Society,
Warrendale, PA,
2004,
ISBN: 1-55899-773-3,
Paper-Nr. W8.8,
6 S.
Zusätzliche Informationen
-
R.B. Stewart, F. Marketz, W.C.M. Lohbeck, F.D. Fischer, W. Daves, F. G. Rammerstorfer, H. J. Böhm:
"Expandable Wellbore Tubulars";
in: "Proceedings of the 1999 SPE Technical Symposium",
Society of Petroleum Engineers,
Dubai,
1999,
ISBN: 978-1-61399-106-0.
Zusätzliche Informationen
-
M.A. Stiftinger, F. G. Rammerstorfer:
"Semi-Analytical Finite Element Formulations for Delamination Prediction in Layered Composite Structures";
in: "Advances in Analysis and Design of Composites",
B.H.V. Topping (Hrg.);
Civil Comp Press,
Edinburgh,
1996,
S. 61
- 72.
-
M.A. Stiftinger, F. G. Rammerstorfer, A. Starlinger:
"Face Layer Wrinkling in Anisotropic Sandwiches";
in: "Sandwich Construction 3",
H.G. Allen (Hrg.);
Chameleon Press,
London,
1996,
S. 325
- 334.
-
W.K. Vonach, T. Daxner, F. G. Rammerstorfer:
"In-Situ Sandwiches with Optimized Metal Foam Cores";
in: "Sandwich Construction 5",
H.R. Meyer-Piening, D. Zenkert (Hrg.);
EMAS Publishing,
Solihull, UK,
2000,
ISBN: 978-1-901537-18-5,
S. 291
- 300.
-
W.K. Vonach, F. G. Rammerstorfer:
"Effects of In-Plane Stiffness on the Wrinkling Load of Sandwich Constructions";
in: "Sandwich Construction 4",
K.A. Olsson (Hrg.);
EMAS Publishing,
Warley,
1998,
S. 155
- 166.
-
W.K. Vonach, F. G. Rammerstorfer:
"Face Layer Wrinkling in Sandwich Shells of General Configuration";
in: "Computational Fluid and Solid Mechanics 2003",
K.J. Bathe (Hrg.);
Elsevier,
Amsterdam,
2003,
ISBN: 0-08-044046-0,
S. 727
- 731.
-
G. Wimmer, H. E. Pettermann:
"Numerical Simulation of Progressive Growth of Delaminations with Curved Fronts";
in: "Proceedings of Composites 2009",
herausgegeben von: ECCOMAS;
Imperial College,
London,
2009,
6 S.
Zusätzliche Informationen
-
P.K. Zysset, L. Rincón:
"An Alternative Fabric-Based Yield and Failure Criterion for Trabecular Bone";
in: "Mechanics of Biological Tissue",
G. Holzapfel, R. Ogden (Hrg.);
Springer-Verlag,
Heidelberg,
2006,
ISBN: 3-540-25194-4,
S. 457
- 470.
Zusätzliche Informationen
Vorträge und Posterpräsentationen (mit Tagungsband-Eintrag)
-
M. Amini, A.G. Reisinger, D. Pahr:
"Effect of Selected Scan Parameters on QCT-Based BMD Estimations of a Femur";
Vortrag: 25th Congress of the European Society of Biomechanics,
Vienna;
07.07.2019
- 10.07.2019; in: "Book of Abstracts of the 25th Congress of the European Society of Biomechanics",
TU Verlag,
(2019),
ISBN: 978-3-903024-96-0;
S. 314.
-
N Amraish, A.G. Reisinger, D. H. Pahr:
"Accuracy And Precision of Full-Field Surface Strain Measurements";
Vortrag: 25th Congress of the European Society of Biomechanics,
Vienna;
07.07.2019
- 10.07.2019; in: "Book of Abstracts of the 25th Congress of the European Society of Biomechanics",
TU Verlag,
(2019),
ISBN: 978-3-903024-96-0;
S. 223.
-
K. Anam, M. Todt, H. E. Pettermann:
"Computationally Efficient Modeling Of Delamination Behavior In Laminated Composites";
Vortrag: 8th ECCOMAS Thematic Conference on the Mechanical Response of Composites,
Göteborg;
22.09.2021
- 24.09.2021; in: "Proceedings of the 8th ECCOMAS Thematic Conference on the Mechanical Response of Composites",
M. Fagerström, G. Catalanotti (Hrg.);
CT02 - Delamination II
(2021),
S. 1
- 12.
-
O.G. Andriotis, M. Handelshauser, S. Desissaire, P.J. Thurner:
"A Nonlinear Rheological Model to Assess Tensile Properties of Individual Collagen Fibrils";
Vortrag: 25th Congress of the European Society of Biomechanics,
Vienna;
07.07.2019
- 10.07.2019; in: "Book of Abstracts of the 25th Congress of the European Society of Biomechanics",
TU Verlag,
(2019),
ISBN: 978-3-903024-96-0;
S. 398.
-
M. Bartosik, D. Holec, M. Todt, F. G. Rammerstorfer, P.H. Mayrhofer:
"Thermal Expansion and Elasticity of Metastable Cubic B1-AlN";
Poster: 41st International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego, CA;
28.04.2014
- 02.05.2014; in: "Book of abstracts",
(2014).
-
M. Bartosik, M. Todt, H. Riedl, C.M. Koller, R. Rachbauer, H. J. Böhm, P.H. Mayrhofer:
"Thermo-mechanically Optimized Multilayer Thin Films";
Vortrag: 42nd International Conference on Metallurgical Coatings and Thin Films (ICMCTF),
San Diego, CA;
20.04.2015
- 24.04.2015; in: "Book of abstracts",
(2015),
S. 82.
Zusätzliche Informationen
-
C. Bilik, D. H. Pahr, F. G. Rammerstorfer:
"A Bead Laying Algorithm for Enhancing the Dynamic and Stability Behaviour of Thin Shell Structures";
Vortrag: 37th Solid Mechanics Conference,
Warschau;
06.09.2010
- 10.09.2010; in: "37th SolMech 2010 Book of Abstracts",
Polish Academy of Science,
Warschau
(2010),
S. 302
- 303.
Zusätzliche Informationen
-
C. Bilik, F. G. Rammerstorfer:
"Computational Design Tools for Increase of Buckling Resistance of Lightweight Structures";
Vortrag: Trends and Challenges in Computational Mechanics,
Padua (eingeladen);
12.09.2011
- 14.09.2011; in: "Trends and Challenges in Computational Mechanics",
G. Zavarise, S. Reese (Hrg.);
Universita degli Studi di Padova,
(2011),
ISBN: 978-88-96477-22-9;
S. 139
- 140.
Zusätzliche Informationen
-
C. Bilik, F. G. Rammerstorfer:
"Instabilitäten während des Walzens von Profilen und im Einsatz von gewalzten Profilen";
Vortrag: XXX. Verformungskundliches Kolloquium,
Planneralm;
26.02.2011
- 01.03.2011; in: "XXX. Verformungskundliches Kolloquium",
B. Buchmayr (Hrg.);
Montanuniversität Leoben,
(2011),
ISBN: 978-3-902078-15-5;
S. 93
- 96.
Zusätzliche Informationen
-
C. Bilik, F. G. Rammerstorfer, T. Daxner, G. Figala, B. Buchmayr:
"Improving the Dynamic and Stability Behaviour of Plates by Laser Treatment";
Vortrag: 6th International Congress of the Croatian Society of Mechanics,
Dubrovnik;
30.09.2009
- 02.10.2009; in: "Proceedings of the 6th ICCSM",
I. Smojver, J. Soric (Hrg.);
(2009),
ISBN: 978-953-7539-11-5;
Paper-Nr. 104,
8 S.
Zusätzliche Informationen
-
C. Bilik, F. G. Rammerstorfer, G. Figala, B. Buchmayr:
"Investigation of the Stability and Dynamic Behaviour of Plates Subjected to Laser Treatment";
Poster: Junior Scientist Conference 2010,
Wien;
07.04.2010
- 09.04.2010; in: "Proceedings of the Junior Scientist Conference 2010",
H. Kaiser, R. Kirner (Hrg.);
(2010),
ISBN: 978-3-200-01797-9;
S. 71
- 72.
Zusätzliche Informationen
-
R.D. Bitsche, Z. Khalil, U. Noster, F. G. Rammerstorfer:
"Simulation von Stahl-Leichtmetall Verbundguss-Strukturen - Herstellung und Mechanisches Verhalten";
Vortrag: 5. Ranshofener Leichtmetalltage 2008,
Geinberg (eingeladen);
28.05.2008
- 29.05.2008; in: "5. Ranshofener Leichtmetalltage 2008",
U. Noster, F. Riemelmoser, P.J. Uggowitzer (Hrg.);
(2008),
ISBN: 978-3-902092-05-2;
S. 87
- 98.
Zusätzliche Informationen
-
R.D. Bitsche, U. Noster, C. Peterlechner, F. G. Rammerstorfer:
"Simulation von kraft- und formschlüssigen Hybridguss-Verbindungen als Designgrundlage";
Vortrag: 4. Ranshofener Leichtmetalltage,
Salzburg (eingeladen);
17.10.2006
- 18.10.2006; in: "4. Ranshofener Leichtmetalltage 2006 - Vom Werkstoff zum Bauteilsystem",
H. Kaufmann, P.J. Uggowitzer, U. Noster (Hrg.);
(2006),
ISBN: 3-902092-04-1;
S. 275
- 288.
Zusätzliche Informationen
-
R.D. Bitsche, F. G. Rammerstorfer:
"Stress Singularities at Interfaces in Structures - Design Charts";
Hauptvortrag: EASEC-11: 11th East Asia-Pacific Conference on Structural Engineering and Construction,
Taipei (eingeladen);
19.11.2008
- 21.11.2008; in: "Proceedings of the 11th East Asia-Pacific Conference on Structural Engineering and Construction",
Y.B. Yang, L.J. Leu, C.S. Chen, P.C. Su (Hrg.);
National Taiwan University,
(2008),
ISBN: 978-986-80222-4-9;
Paper-Nr. B08_01,
6 S.
Zusätzliche Informationen
-
H. J. Böhm, T. Drabek:
"Implementierung nichtlokaler duktiler Schädigungsmodelle in ABAQUS/Standard";
Vortrag: ABAQUS Austria Anwenderkonferenz 2004,
Linz;
27.09.2004
- 28.09.2004; in: "ABAQUS Austria Anwenderkonferenz 2004",
ABAQUS Inc., Providence, RI,
(2004),
12 S.
Zusätzliche Informationen
-
H. J. Böhm, D. Duschlbauer, T. Drabek, C.M. Chimani:
"Finite Element Based Micromechanical Model of Ductile Intergranular Cracks in Columnar Two-Phase System";
Vortrag: WCCM VI,
Beijing;
05.09.2004
- 10.09.2004; in: "Computational Mechanics. Proceedings of the Sixth World Congress on Computational Mechanics",
Z.H. Yao, M.W. Yuan, W.X. Zhong (Hrg.);
(2004),
ISBN: 7-89494-512-9;
Paper-Nr. 258,
10 S.
Zusätzliche Informationen
-
H. J. Böhm, D. Duschlbauer, T. Drabek, O. Kolednik, C.M. Chimani, G.X. Shan:
"Numerical Studies of Crack Sensitivity under Continuous-Casting Conditions";
Vortrag: VAI Continuous Casting and Hot Rolling Conference CCR'04,
Linz (eingeladen);
14.06.2004
- 15.06.2004; in: "Proceedings of the VAI Continuous Casting and Hot-Rolling Conference CCR'04",
(2004),
S. 1
- 8.
Zusätzliche Informationen
-
H. J. Böhm, W. Han, A. Eckschlager:
"Multi-Inclusion Unit Cell Studies of the Thermomechanical Behavior of Discontinuously Reinforced Ductile Matrix Composites";
Vortrag: International Conference on Computational Engineering & Sciences,
Puerto Vallarta, Mexico;
19.08.2001
- 25.08.2001; in: "Advances in Computational Engineering & Sciences. Proceedings of the ICES'01",
S.N. Atluri, T. Nishioka, M. Kikuchi (Hrg.);
Tech Science Press,
(2001),
Paper-Nr. # 95.
-
H. J. Böhm, S. Nogales:
"Analytical and Numerical Modelling of the Thermomechanical and Thermophysical Behavior of Discontinuously Reinforced Composites";
Vortrag: Taiwan-Austria Joint Workshop on Computational Mechanics of Materials and Structures,
Taipei (eingeladen);
15.11.2008
- 17.11.2008; in: "Proceedings of the Taiwan-Austria Joint Workshop on Computational Mechanics of Materials and Structures",
Y.B. Yang (Hrg.);
National Taiwan University,
(2008),
S. 33
- 36.
Zusätzliche Informationen
-
H. J. Böhm, D. H. Pahr, S. Nogales, M. B. Gándara:
"Comparison of Unit Cell and Windowing Methods for Obtaining Estimates on Macroscopic Elasticity Tensors of Inhomogeneous Materials";
Vortrag: EASEC-11: 11th East Asia-Pacific Conference on Structural Engineering and Construction,
Taipei (eingeladen);
19.11.2008
- 21.11.2008; in: "Proceedings of the 11th East Asia-Pacific Conference on Structural Engineering and Construction",
Y.B. Yang, L.J. Leu, C.S. Chen, P.C. Su (Hrg.);
National Taiwan University,
(2008),
ISBN: 978-986-80222-4-9;
Paper-Nr. B11_06,
5 S.
Zusätzliche Informationen
-
H. J. Böhm, A. Rasool:
"Particle Shape Effects on Global and Local Behavior of Particle Reinforced Composites";
Vortrag: MFO-Workshop #1212, Mechanics of Materials,
Oberwolfach (eingeladen);
18.03.2012
- 24.03.2012; in: "Mechanics of Materials",
R. Kienzler, D.L. McDowell, S. Müller, E.A. Werner (Hrg.);
Mathematisches Forschungsinstitut Oberwolfach,
Report 15/2012
(2012),
3 S.
Zusätzliche Informationen
-
T. Ceglar, H. E. Pettermann:
"Homogenization Of Fiber Reinforced Elastomer Laminates";
Vortrag: 8th ECCOMAS Thematic Conference on the Mechanical Response of Composites,
Göteborg;
22.09.2021
- 24.09.2021; in: "Proceedings of the 8th ECCOMAS Thematic Conference on the Mechanical Response of Composites",
M. Fagerström, G. Catalanotti (Hrg.);
CT10 - Multi-Scale Modelling IV
(2021),
S. 1
- 7.
-
T. Ceglar, M. Schwab, H. E. Pettermann:
"DCB and ENF Multi-Scale Simulations";
Vortrag: 6th ECCOMAS Thematic Conference on the Mechanical Response of Composites: COMPOSITES 2017,
Eindhoven;
20.09.2017
- 22.09.2017; in: "6th ECCOMAS Thematic Conference on the Mechanical Response of Composites: COMPOSITES 2017",
J.J.C. Remmers, A. Turon (Hrg.);
TU EIndhoven,
(2017),
S. 13
- 23.
Zusätzliche Informationen
-
E. Cichy, A.G. Reisinger, P. Roschger, P.K. Zysset:
"Morphology-Elasticity Relationships in Mineralized Turkey Leg Tendon";
Vortrag: 44. DGBMT Jahrestagung / 3-Ländertagung D-A-CH,
Rostock;
05.10.2010
- 08.10.2010; in: "44. DGBMT Jahrestagung",
Biomed.Tech.,
55 (Suppl. 1)
(2010),
3 S.
Zusätzliche Informationen
-
E. Cichy, M. Schneider, P.K. Zysset:
"Transverse-Isotropic Properties of a Model Mineralized Tissue: Dependence on Nanoindentation Depth and Hydration State";
Poster: Junior Scientist Conference 2010,
Wien;
07.04.2010
- 09.04.2010; in: "Proceedings of the Junior Scientist Conference 2010",
H. Kaiser, R. Kirner (Hrg.);
(2010),
ISBN: 978-3-200-01797-9;
S. 269
- 270.
Zusätzliche Informationen
-
E. Dall´Ara, B. Luisier, M. Pretterklieber, F. Kainberger, P.K. Zysset, D. H. Pahr:
"A Nonlinear Finite Element Model Validation Study for the Human Femur";
Vortrag: ECCOMAS 2012 (European Congress on Computational Methods in Applied Sciences and Engineering,
Wien;
10.09.2012
- 14.09.2012; in: "CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)",
J. Eberhardsteiner, H. J. Böhm, F. G. Rammerstorfer (Hrg.);
TU Wien,
Wien
(2012),
ISBN: 978-3-9502481-9-7;
Paper-Nr. 4795,
2 S.
-
E. Dall´Ara, P.K. Zysset, D. H. Pahr:
"Prediction of Spine and Hip Strength with BMD and FE Models: Influence of Gender";
Vortrag: 11th World Congress on Compuational Mechanics (WCCM XI),
Barcelona;
20.07.2014
- 25.07.2014; in: "Abstracts of the 11th World Congress on Compuational Mechanics",
CIMNE,
Barcelona
(2014),
ISBN: 978-84-942844-7-2.
-
B. Daum, F. G. Rammerstorfer, F.D. Fischer, G. Dehm:
"Buckling Phenomena Associated with Micro-Pillar Testing";
Vortrag: ECCOMAS 2012 (European Congress on Computational Methods in Applied Sciences and Engineering,
Wien (eingeladen);
10.09.2012
- 14.09.2012; in: "CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)",
J. Eberhardsteiner, H. J. Böhm, F. G. Rammerstorfer (Hrg.);
TU Wien,
Wien
(2012),
ISBN: 978-3-9502481-9-7;
Paper-Nr. 4425,
2 S.
-
T. Daxner, T. Flatscher, F. G. Rammerstorfer:
"Optimum Design of Corrugated Board under Buckling Constraints";
Vortrag: 7th World Congress on Structural and Multidisciplinary Optimization,
Seoul;
21.05.2007
- 25.05.2007; in: "Proceedings of the 7th World Congress on Structural and Multidisciplinary Optimization",
B.M. Kwak (Hrg.);
BMD Co., Seoul,
(2007),
ISBN: 978-89-959384-2-3;
Paper-Nr. A0306,
10 S.
Zusätzliche Informationen
-
T. Daxner, M.H. Luxner, F. G. Rammerstorfer:
"Thermo-Mechanically Interacting Composite Pipes Optimised by Genetic Algorithms";
Vortrag: 11th European Conference on Composite Materials,
Rhodos;
31.05.2004
- 03.06.2004; in: "ECCM11 Book of Abstracts",
C. Galiotis (Hrg.);
Vol.2
(2004),
S. 43
- 44.
Zusätzliche Informationen
-
T. Daxner, F. G. Rammerstorfer, F.D. Fischer:
"Flaring of Cylindrical Shells and Associated Instability Phenomena";
Vortrag: WCCM VI,
Beijing (eingeladen);
05.09.2004
- 10.09.2004; in: "Computational Mechanics. Proceedings of the Sixth World Congress on Computational Mechanics",
Z.H. Yao, M.W. Yuan, W.X. Zhong (Hrg.);
(2004),
ISBN: 7-89494-512-9;
Paper-Nr. 513,
9 S.
Zusätzliche Informationen
-
T. Drabek, H. J. Böhm:
"Implementation of Nonlocal Damage Models in Commerical FE-Codes";
Vortrag: WCCM VI,
Beijing;
05.09.2004
- 10.09.2004; in: "Computational Mechanics. Proceedings of the Sixth World Congress on Computational Mechanics",
Z.H. Yao, M.W. Yuan, W.X. Zhong (Hrg.);
(2004),
ISBN: 7-89494-512-9;
Paper-Nr. 262,
10 S.
Zusätzliche Informationen
-
D. Duschlbauer, H. J. Böhm, H. E. Pettermann:
"Composites with planar random fiber arrangements";
Vortrag: XXI International Congress of Theoretical and Applied Mechanics,
Warschau;
15.08.2004
- 21.08.2004; in: "Proceedings of the XXI International Congress of Theorectical and Applied Mechanics",
W. Gutkowski, T.A. Kowalewski (Hrg.);
IPPT PAN,
Warschau
(2004),
ISBN: 83-89687-01-1;
Paper-Nr. SM13_12321,
2 S.
-
D. Duschlbauer, H. J. Böhm, H. E. Pettermann:
"Short Fiber Metal Matrix Composites under Temperature Load - Local Stresses and Global Deformations";
Vortrag: Sixth International Congress on Thermal Stresses,
Wien;
26.05.2005
- 29.05.2005; in: "Thermal Strress 2005: Proceedings of the Sixth International Congress on Thermal Stresses",
F. Ziegler, R. Heuer, C. Adam (Hrg.);
(2005),
ISBN: 3-901167-12-9;
S. 759
- 762.
-
A. Eckschlager, H. J. Böhm:
"3D Finite Element Unit Cell Study of Particle Failure in Brittle Particle Reinforced Ductile Matrix Composites";
Vortrag: Fifth World Congress on Compuational Mechanics (WCCM V),
Wien;
07.07.2002
- 12.07.2002; in: "Proceedings of the Fifth World Congress on Compuational Mechanics (WCCM V)",
H.A. Mang, F. G. Rammerstorfer, J. Eberhardsteiner (Hrg.);
TU Wien,
Wien
(2002),
ISBN: 3-9501554-0-6.
Zusätzliche Informationen
-
A. Eckschlager, W. Han, H. J. Böhm:
"Modeling of Brittle Particle Fracture in Particle Reinforced Ductile Matrix Composites by 3D-Unit Cells";
Vortrag: 13th International Conference on Composite Materials (ICCM-13),
Beijing;
25.06.2001
- 29.06.2001; in: "Proceedings of the ICCM-13",
Y. Zhang (Hrg.);
Scientific and Technical Documents Publishing House,
(2001),
ISBN: 7-900075-46-1;
Paper-Nr. # 1342.
-
S.-J. Estermann, C. Müller-Guttenbrunn, D. H. Pahr, A.G. Reisinger:
"Macroindentation of Liver Tissue and 3D Printing Materials for Comparison of Tactile Properties";
Vortrag: 25th Congress of the European Society of Biomechanics,
Vienna;
07.07.2019
- 10.07.2019; in: "Book of Abstracts of the 25th Congress of the European Society of Biomechanics",
TU Verlag,
(2019),
ISBN: 978-3-903024-96-0;
S. 230.
-
T. Flatscher, H. E. Pettermann:
"A Constitutive Model for Unidirectional Plies: Implementation and Application in Finite Element Analysis";
Vortrag: 10th International Conference on Computational Structures Theory (CST 2010),
Valencia;
14.09.2010
- 17.09.2010; in: "The Tenth International Conference on Computational Structures Technology",
B.H.V. Topping, J.M. Adam, F.J. Pallarés, R. Bru, M.L. Romero (Hrg.);
(2010),
ISBN: 978-1-905088-37-9;
Paper-Nr. 70,
10 S.
Zusätzliche Informationen
-
M. Frank, D. Marx, D. H. Pahr, P.J. Thurner:
"Mechanical Properties of Individual Trabeculae in a Physiological Environment";
Vortrag: The 13th IASTED International Conference on Biomedical Engineering - BioMed 2017,
Innsbruck;
20.02.2017
- 21.02.2017; in: "Proceedings of the IASTED International Conference Biomedical Engineering (BioMed2017)",
R. Kiss, P.J. Thurner (Hrg.);
ACTA Press, Calgary, AB,
(2017),
ISBN: 978-0-88986-990-5;
S. 141
- 146.
Zusätzliche Informationen
-
M. Frank, A.G. Reisinger, D. H. Pahr, P.J. Thurner:
"Tensile Mechanical Properties of Human Individual Trabeculae of Non- and Osteopororotic Fracture Donors";
Poster: 25th Congress of the European Society of Biomechanics,
Vienna;
07.07.2019
- 10.07.2019; in: "Book of Abstracts of the 25th Congress of the European Society of Biomechanics",
TU Verlag,
(2019),
ISBN: 978-3-903024-96-0;
S. 685.
-
N. Friedl, F. G. Rammerstorfer, F.D. Fischer, A. Noé:
"Waviness of Thin Strips - Instabilities during Forming and Heat Treatment Processes";
Vortrag: 5th International Conference on Computation of Shell and Spatial Structures,
Salzburg (eingeladen);
01.06.2005
- 04.06.2005; in: "Extended Abstracts of the 5th International Conference on Computation of Shell and Spatial Structures",
E. Ramm, W.A. Wall, K.U. Bletzinger, M. Bischoff (Hrg.);
(2005),
Paper-Nr. 137,
4 S.
Zusätzliche Informationen
-
P.F. Fuchs, M.R. Mansouri, T. Ceglar, J. Beter, B. Schrittesser, H. E. Pettermann:
"Berechnung von Lastkopplungen in verstärkten Elastomeren";
Vortrag: 28.Leobener K unststoff-Kolloquium: Simulation in der Kunststofftechnik,
Leoben;
25.04.2019
- 26.04.2019; in: "28.Leobener K unststoff-Kolloquium: Simulation in der Kunststofftechnik",
Eigenverlag Lehrstuhl für Konstruieren in Kunst- und Verbundstoffen, Department Kunststofftechnik, Montanuniversität Leoben,
Schriftenreihe Kunststofftechnik Leoben / 9 / Leoben
(2019),
ISBN: 978-3-9503248-9-1;
S. 44
- 50.
-
J. Gager, T. Flatscher, H. E. Pettermann:
"Elasto-Plasto-Damage Modeling of FRP Fabrics - A Shell Unit Cell Approach";
Vortrag: 3rd ECCOMAS Thematic Conference on the Mechanical Response of Composites,
Hannover;
21.09.2011
- 23.09.2011; in: "Proceedings of the 3rd ECCOMAS Thematic Conference on the Mechanical Response of Composites",
R. Rolfes, E. Jansen (Hrg.);
Leibniz Univerisität Hannover,
Hannover
(2011),
ISBN: 978-3-00-035855-5;
S. 279
- 286.
Zusätzliche Informationen
-
J. Gager, B. Karunamurthy, M. Nelhiebel, H. E. Pettermann:
"Finite Element Based Simulations of Interface Cracks in Semiconductor Devices - A Study on Geometry Parameters and Delamination Configurations";
Vortrag: 18th European Conference on Fracture,
Dresden;
30.08.2010
- 03.09.2010; in: "Fracture of Materials and Structures form Micro to Macro Scales",
ESIS,
(2010),
Paper-Nr. 233,
8 S.
Zusätzliche Informationen
-
J. Gager, M. Meindlhumer, M. Schwab, H. E. Pettermann:
"Numerically Predicted Damage and Failure Envelopes of Composites Featuring Nonlinear Material Behavior";
Vortrag: 19th International Conference on Composite Materials,
Montréal;
28.07.2013
- 02.08.2013; in: "Proceedings of the 19th International Conference on Composite Materials",
S.V. Hoa, P. Hubert (Hrg.);
Byte Press,
Toronto, ON
(2013),
9 S.
Zusätzliche Informationen
-
J. Gager, H. E. Pettermann:
"Assessing the Operation Load Range of Non-Linear Textile Composites by Means of Stress Envelopes";
Vortrag: 15th European Conference on Composite Materials (ECCM 15),
Venedig;
24.06.2012
- 28.06.2012; in: "Proceedings of the 15th European Conference on Composite Materials",
ECCM15,
(2012),
ISBN: 978-88-88785-33-2;
Paper-Nr. 1837,
8 S.
Zusätzliche Informationen
-
J. Gager, H. E. Pettermann:
"Multi-Layered Textile Composites - A Shell Element Based Homogenization Approach";
Vortrag: ECCOMAS 2012 (European Congress on Computational Methods in Applied Sciences and Engineering,
Wien (eingeladen);
10.09.2012
- 14.09.2012; in: "CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)",
J. Eberhardsteiner, H. J. Böhm, F. G. Rammerstorfer (Hrg.);
TU Wien,
Wien
(2012),
ISBN: 978-3-9502481-9-7;
Paper-Nr. 4753,
12 S.
Zusätzliche Informationen
-
J. Gager, H. E. Pettermann:
"Numerical Predictions of the Nonlinear Behavior of Bi-Axial Braidings";
Vortrag: 16th European Conference on Composite Materials (ECCM16),
Sevilla;
22.06.2014
- 26.06.2014; in: "Proceedings of the 16th European Conference on Composite Materials",
University of Seville,
Paper 0171
(2014),
S. 1
- 10.
Zusätzliche Informationen
-
G. Ganzosch, M. Todt, A. Köllner, C. Völlmecke:
"Experimental investigations on pre-stressed stayed columns on smaller length scales";
Vortrag: 8th International Conferences on Thin Walled Structures,
Lisbon;
24.07.2018
- 27.07.2018; in: "Proceedings of the 8th International Conference on Thin Walled Structures",
D. Camotim, N. Silvestre (Hrg.);
(2018),
ISBN: 978-989-20-8665-1;
Paper-Nr. 135,
15 S.
-
T. Gross, C. Gusenbauer, A. Synek, D. H. Pahr:
"CT Image Acquisition for Implant Modeling in Bone Biomechanics";
Vortrag: iCT 2014 Conference on Industrial Computed Tomography,
Wels;
25.02.2014
- 28.02.2014; in: "Conference on Industrial Computed Tomography",
Shaker Verlag,
Aachen
(2014),
ISBN: 978-3-8440-2557-6;
S. 319
- 320.
Zusätzliche Informationen
-
T. Gross, D. H. Pahr:
"Influence of Mesh Size and Element Type on Apparent Yield Properties of microCT Based Finite Element Models of Human Trabecular Bone";
Vortrag: VIPimage 2013,
Funchal;
14.10.2013
- 16.10.2013; in: "Computational Vision and Medical Image Processing VIPimage 2013",
J.M. Tavares, R.M. Natal Jorge (Hrg.);
CRC Press/Balkema,
Leiden
(2013),
ISBN: 978-1-138-00081-0;
S. 415
- 417.
Zusätzliche Informationen
-
P. Gruber, M. Markovic, L. Kain, O.G. Andriotis, M. Tromayer, P. Dubruel, S. van Vlierberghe, P.J. Thurner, R. Liska, A. Ovsianikov:
"Stiffness Guided Cell Migration in 3D Hydrogels via Multiphoton Grafting";
Poster: Donau Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Donau Vltava Sava Polymer Meeting 2017",
Book of Abstract,
(2017),
S. PO-8.
-
W. Han, H. J. Böhm:
"Numerical Study on the Influence of Thermal Residual Stresses in Metal Matrix Composites Using 3/D Multi-Inclusion Unit Cells";
Vortrag: Thermal Stresses 2001,
Osaka;
08.06.2001
- 11.06.2001; in: "Thermal Stresses 2001",
Y. Tanigawa, R.B. Hetnarski, N. Noda (Hrg.);
Osaka Prefecture University,
Japan
(2001),
S. 319
- 322.
-
W. Han, A. Eckschlager, H. J. Böhm:
"Numerical Modeling of Discontinuously Reinforced Metal Matrix Composites by Three-Dimensional Multi-Inclusion Unit Cells";
Vortrag: 13th International Conference on Composite Materials (ICCM-13),
Beijing;
25.06.2001
- 29.06.2001; in: "Proceedings of the 13th International Conference on Composite Materials",
Y. Zhang (Hrg.);
Scientific and Technical Documents Publishing House,
Beijing
(2001),
ISBN: 7-900075-46-1;
Paper-Nr. # 1222.
-
M. Handelshauser, P. Sandbichler, K. Terashima, M. Marchetti-Deschmann:
"Evaluation of Spraying and Sublimation Devices for Matrix Application in MALDI Imaging";
Poster: 69th ASMS Conference on Mass Spectrometry and Allied Topics,
Philadelphia, PA und online;
31.10.2021
- 04.11.2021; in: "Proceedings of the 69th ASMS",
(2021),
S. FP519.
-
M. Handelshauser, P.J. Thurner, M. Marchetti-Deschmann:
"Localized Protein Information and Physiological Tissue Mechanics of Human Menisci";
Poster: 69th ASMS Conference on Mass Spectrometry and Allied Topics,
Philadelphia, PA und online;
31.10.2021
- 04.11.2021; in: "Proceedings of the 69th ASMS",
(2021),
S. FP316.
-
M.A. Hartmann, M. Todt, D. Holec, P.H. Mayrhofer, O. Paris, F.D. Fischer, F. G. Rammerstorfer:
"Atomistic Modeling of the Mechanical Stability Behavior of Fullerenes";
Hauptvortrag: ECCOMAS 2012 (European Congress on Computational Methods in Applied Sciences and Engineering,
Wien (eingeladen);
10.09.2012
- 14.09.2012; in: "CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)",
J. Eberhardsteiner, H. J. Böhm, F. G. Rammerstorfer (Hrg.);
TU Wien,
Wien
(2012),
ISBN: 978-3-9502481-9-7;
Paper-Nr. 5008,
2 S.
-
B. Hößl, H. J. Böhm, F. G. Rammerstorfer, F.G. Barth:
"Mechanoreception in the Exoskeleton of Arachnids: Engineering Meets Biology";
Vortrag: Third IASTED International Conference on Biomechanics,
Benidorm;
07.09.2005
- 09.09.2005; in: "Proceedings of the Third IASTED International Conference on Biomechanics",
M.H. Hamza (Hrg.);
IASTED Acta Press,
Anaheim, CA
(2005),
ISBN: 0-88986-534-5;
Paper-Nr. 485-088,
5 S.
Zusätzliche Informationen
-
P. Hoffmann, M. Nelhiebel, B. Karunamurthy, H. E. Pettermann, M. Todt:
"Simulation of Fatigue Damage in Clusters of DMOS Cells Subjected to Non-Uniform Transient Thermo-Mechnical Loading";
Vortrag: 21st International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE),
Virtuell;
06.07.2020
- 27.07.2020; in: "2020 21st International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE)",
IEEE Xplore,
(2020),
S. 1
- 9.
-
C.O. Huber, S. Kremmer, H. E. Pettermann:
"Finite Element Simulation of Metal Matrix Composites - Effective Coefficients of Friction and Temperature Fields under Frictional Loading";
Vortrag: World Tribology Congress III,
Washington, DC;
12.09.2005
- 16.09.2005; in: "Proceedings WTC2005 World Tribology Congress III",
R.S. Cowan, J. Tichy, S. Gunsel, J. Knight (Hrg.);
ASME,
New York, NY
(2005),
ISBN: 0-7918-3767-x;
Paper-Nr. WTC2005-63272;,
2 S.
Zusätzliche Informationen
-
C.O. Huber, M.H. Luxner, S. Kremmer, S. Nogales, H. J. Böhm, H. E. Pettermann:
"Forming Simulations of MMC Components by a Micromechanics Based Hierarchical FEM Approach";
Vortrag: NUMIFORM 07,
Porto;
17.06.2007
- 21.06.2007; in: "Numiform 07 - Materials Processing and Design: Modeling, Simulation and Applications",
J.M.A.C. de Sá, A.D. Santos (Hrg.);
American Institute of Physics,
(2007),
ISBN: 978-0-7354-0416-8;
Paper-Nr. 1351,
6 S.
Zusätzliche Informationen
-
G. Iori, J. Schneider, F. Heyer, C. Wyers, C.C. Glüer, J. van den Bergh, D. Pahr, K. Raum:
"Cortical Bone Thinning at the Tibia Reflects Femoral Neck Structural Deterioration";
Vortrag: 25th Congress of the European Society of Biomechanics,
Vienna;
07.07.2019
- 10.07.2019; in: "Book of Abstracts of the 25th Congress of the European Society of Biomechanics",
TU Verlag,
(2019),
ISBN: 978-3-903024-96-0;
S. 274.
-
P. Karner, M. Frank, O.G. Andriotis, A.G. Reisinger, P.J. Thurner:
"Influence of Non-Enzymatic Glycation on Tensile Mechanical Properties of Bovine Individual Trabeculae";
Vortrag: 25th Congress of the European Society of Biomechanics,
Vienna;
07.07.2019
- 10.07.2019; in: "Book of Abstracts of the 25th Congress of the European Society of Biomechanics",
TU Verlag,
(2019),
ISBN: 978-3-903024-96-0;
S. 281.
-
J. Kaul, R. Duy, H. E. Pettermann:
"Multi-Hierarchical Fem Simulations Of A Fabric Laminated Structure Taking Into Account Anisotropic Plasticity And Damage";
Vortrag: 12th International Conference on Composite Science and Technology (ICCST 12),
Sorrento, Italy;
08.05.2019
- 10.05.2019; in: "Proceedings of the 12th International Conference on Composite Science and Technology",
(2019),
S. 1
- 2.
-
J. Kaul, H. E. Pettermann:
"A constitutive model for fiber reinforced polymer plies - coupling of plastic and elasto-damage mechanisms";
Vortrag: 6th European Conference on Computational Mechanics (Solids, Structures and Coupled Problems) (ECCM 6),
Glasgow, UK;
11.06.2018
- 15.06.2018; in: "Proceedings of the 6th European Conference on Computational Mechanics (ECCM 6)",
R. de Borst, J. Reese, C. Pearce (Hrg.);
(2018),
12 S.
-
J. Kaul, H. E. Pettermann:
"A Constitutive Model For Fiber Reinforced Polymer Plies - Plastic Yielding With Kinematic Hardening Behavior";
Vortrag: 7th ECCOMAS Thematic Conference on the Mechanical Response of Composites,
Girona, Spain;
18.09.2019
- 20.09.2019; in: "Proceedings of the 7th ECCOMAS Thematic Conference on the Mechanical Response of Composites",
A. Turon, P. Maimí, M. Fagerström (Hrg.);
(2019),
S. 141
- 152.
-
M. Kinzl, L. Benneker, A. Boger, D. H. Pahr:
"The Effect of Material Behavior and Placement of Bone Cement on the Stiffness, Strength and Endplate Load Transfer in Vertebroplasty";
Vortrag: 44. DGBMT Jahrestagung / 3-Ländertagung D-A-CH,
Rostock;
05.10.2010
- 08.10.2010; in: "44. DGBMT Jahrestagung",
Biomed.Tech.,
55 (Suppl. 1)
(2010),
4 S.
Zusätzliche Informationen
-
M. Kinzl, L. Benneker, D. H. Pahr:
"The Effect of Material Behavior and Placement of Bone Cement on the Mechanical Behavior and Load Transfer of Augmented Vertebral Bodies";
Poster: Junior Scientist Conference 2010,
Wien;
07.04.2010
- 09.04.2010; in: "Proceedings of the Junior Scientist Conference 2010",
H. Kaiser, R. Kirner (Hrg.);
(2010),
ISBN: 978-3-200-01797-9;
S. 263
- 264.
Zusätzliche Informationen
-
G. Kravchenko, B. Karunamurthy, M. Nelhiebel, H. E. Pettermann:
"Finite Element Analysis of Fatigue cracks Formation in Power Metallization of a Semiconductor Device Subjected to Active Cycling";
Vortrag: 14th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems,
Wroclaw;
15.04.2013
- 17.04.2013; in: "Proceedings of the 14th Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems",
IEEE, Piscataway, NJ,
(2013),
ISBN: 978-1-4673-6137-8;
Paper-Nr. 91,
6 S.
Zusätzliche Informationen
-
G. Kravchenko, B. Karunamurthy, H. E. Pettermann:
"FEM Study of Fatigue Crack Growth in a Power Semiconductor Chip Subjected to Transient Thermal Loading";
Vortrag: 20th European Conference on Fracture,
Trondheim;
30.06.2014
- 04.07.2014; in: "Proceedings of the ECF20",
Procedia Materials Science,
3
(2014),
ISSN: 2211-8128;
S. 63
- 70.
Zusätzliche Informationen
-
G. Kravchenko, H. E. Pettermann:
"A Cyclic Cohesive Zone Model for Transient Thermomechanical Loading";
Vortrag: 11th World Congress on Compuational Mechanics (WCCM XI),
Barcelona;
20.07.2014
- 25.07.2014; in: "Proceedings of the 11th World Congress on Compuational Mechanics",
E. Oñate, X. Oliver, A. Huerta (Hrg.);
CIMNE,
Barcelona
(2014),
ISBN: 978-84-942844-7-2;
S. 1778
- 1789.
Zusätzliche Informationen
-
A. Kuhn, T. Palau, G. Schlager, H. J. Böhm, S. Nogales, V. Oancea, R. Roy, A. Rauh, J. Lescheticky:
"CoMModO - Complex Material Modelling Operations: A Comprehensive Approach to the Modelling of Complex Materials with Machine Learning Models within Finite Element Simulations";
Vortrag: 10th International Conference on Modeling and Applied Simulation (MAS2011),
Rom;
12.09.2011
- 14.09.2011; in: "Proceedings of the 10th International Conference on Modeling and Applied Simulation,",
A.G. Bruzzone, C. Frydman, M. Massei, M. McGinnis, M.A. Piera, G. Zacharewicz (Hrg.);
Universitá di Genova, Genoa,
(2011),
ISBN: 978-88-903724-5-2;
S. 80
- 89.
Zusätzliche Informationen
-
T. Li, T. Jenkins, S. Meakins, S.A. Lanham, P.J. Thurner, R.O.C. Oreffo:
"Effect of In-Utero Vitamin D Depletion on Offspring Skeletal Development";
Vortrag: 11th World Congress on Compuational Mechanics (WCCM XI),
Barcelona;
20.07.2014
- 25.07.2014; in: "Abstracts of the 11th World Congress on Compuational Mechanics",
CIMNE,
Barcelona
(2014),
ISBN: 978-84-942844-7-2.
-
A. Lorenz, L. Steiner, C. Freidhager, U.G. Leichtle, D. Pahr:
"Comparison of Different Methods for Automatic Landmark Detection From 2D Images, 3D Images or 3D Surface Meshes";
Vortrag: 25th Congress of the European Society of Biomechanics,
Vienna;
07.07.2019
- 10.07.2019; in: "Book of Abstracts of the 25th Congress of the European Society of Biomechanics",
TU Verlag,
(2019),
ISBN: 978-3-903024-96-0;
S. 165.
-
M. Lunzer, L. Shi, O.G. Andriotis, P. Gruber, M. Markovic, P.J. Thurner, D. Ossipov, R. Liska, A. Ovsianikov:
"Micromechanical Analysis Of Photolabile Hydrogels Micropatterned By Multiphoton Lithography";
Vortrag: 25th Congress of the European Society of Biomechanics,
Vienna;
07.07.2019
- 10.07.2019; in: "Book of Abstracts of the 25th Congress of the European Society of Biomechanics",
TU Verlag,
(2019),
ISBN: 978-3-903024-96-0;
S. 32.
-
M. Lunzer, L. Shi, O.G. Andriotis, P. Gruber, M. Markovic, P.J. Thurner, D. Ossipov, R. Liska, A. Ovsianikov:
"Two-Photon Micropatterning of a Photolabile Hydrogel Using a Two-Photon Sensitizer";
Poster: Symposium 'BSTE 2018: Next Generation Tissue Engineering',
Ghent, Belgien;
21.11.2018
- 23.11.2018; in: "BSTE 2018: Next Generation Tissue Engineering",
(2018),
S. PO18.
Zusätzliche Informationen
-
M.H. Luxner, J. Stampfl, H. E. Pettermann:
"Linear and Nonlinear Numerical Investigations of Regular Open Cell Structures";
Vortrag: 2004 ASME International Mechanical Engineering Congress and RD&D Expo,
Anaheim, CA;
13.11.2004
- 20.11.2004; in: "Proceedings of the 2004 ASME International Mechanical Engineering Conference",
ASME, New York,
(2004),
ISBN: 0-7918-4180-4;
Paper-Nr. IMECE2004-62545.
Zusätzliche Informationen
-
R. Monetti, J.S. Bauer, I. Sidorenko, D. Müller, E. Rummeny, M. Matsuura, F. Eckstein, E.M. Lochmüller, P.K. Zysset, C. Räth:
"Assessment of the Human Trabelcular Bone Structure Using Minkowski Functionals";
Vortrag: SPIE Conference on Medical Imaging 2009: Biomedical Applications in Molecular, Structural, and Functional Imaging,
Lake Bueno Vista, FLA;
08.02.2009; in: "Medical Imaging 2009: Biomedical Applications in Molecular, Structural, and Functional Imaging, SPIE 7262",
X.P. Hu, A.V. Clough (Hrg.);
SPIE,
Bellingham, WA
(2009).
Zusätzliche Informationen
-
R. Monetti, I. Sidorenko, C. Räth, J.S. Bauer, D. Müller, E. Rummeny, M. Matsuura, E.M. Lochmüller, F. Eckstein, P.K. Zysset:
"Structure-Based Classification of μ-CT Images of Human Bone Using Local Minkowski Functionals";
Vortrag: SPIE Conference on Medical Imaging 2011: Biomedical Applications in Molecular, Structural, and Functional Imaging,
San Diego, CA;
04.02.2011
- 09.02.2011; in: "Medical Imaging 2011: Biomedical Applications in Molecular, Structural and Functional Imaging, SPIE 7695",
J.B. Weaver, R.C. Molthen (Hrg.);
SPIE,
Bellingham, WA
(2011),
ISBN: 9780819485076.
Zusätzliche Informationen
-
N. Motoi, M. Nalbach, S. Ito, P.J. Thurner, G. Schitter:
"Adaptive Control Method Based on Recursive Least Square Method by Piezoelectric Actuator for Pulling Fibril with Parameter Variation";
Vortrag: 46th Annual Conference of the IEEE Industrial Electronics Society (IECON 2020),
Singapore, Singapore;
18.10.2020
- 21.10.2020; in: "Proceedings of the 46th Annual Conference of the IEEE Industrial Electronics Society",
IEEE,
(2020),
S. 550
- 555.
Zusätzliche Informationen
-
M. Nalbach, O.G. Andriotis, P.J. Thurner:
"In-situ Collagen Fibril Indentation: The Effect of Temperature and Glycation on Fibril-Nanomechanics";
Vortrag: 25th Congress of the European Society of Biomechanics,
Vienna;
07.07.2019
- 10.07.2019; in: "Book of Abstracts of the 25th Congress of the European Society of Biomechanics",
TU Verlag,
(2019),
ISBN: 978-3-903024-96-0;
S. 400.
-
V. Nedelkovski, O.G. Andriotis, A. Steiger-Thirsfeld, J. Bernardi, P.J. Thurner:
"AFM-Based Microbeam Bending of Human Femoral Cortical Bone Lamellae in Physiological Conditions";
Vortrag: 25th Congress of the European Society of Biomechanics,
Vienna;
07.07.2019
- 10.07.2019; in: "Book of Abstracts of the 25th Congress of the European Society of Biomechanics",
TU Verlag,
(2019),
ISBN: 978-3-903024-96-0;
S. 406.
-
D. H. Pahr:
"Hierarchical Modeling of Composite Aeroplane Structures";
Vortrag: 10th Japanese-European Symposium on Composite Materials,
Ueda, Japan (eingeladen);
26.09.2006
- 29.09.2006; in: "Proceedings of Nano-Macro Interactive Solution and Hybrid Technology for Practical Application, Advanced Fiber Science and Textile Technology",
K. Kemmochi, M. Hojo, H. Tsuda (Hrg.);
(2006),
S. 91
- 94.
-
D. H. Pahr:
"Linear and Nonlinear μFE Models of Human Bones: Revisiting Methods, Simulation Issues, Selected Results";
Vortrag: ECCOMAS 2012 (European Congress on Computational Methods in Applied Sciences and Engineering,
Wien (eingeladen);
10.09.2012
- 14.09.2012; in: "CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)",
J. Eberhardsteiner, H. J. Böhm, F. G. Rammerstorfer (Hrg.);
TU Wien,
Wien
(2012),
ISBN: 978-3-9502481-9-7;
Paper-Nr. 4101,
2 S.
-
D. H. Pahr, H. J. Böhm:
"Assessment of Mixed Uniform Boundary Conditions for Predicting the Macroscopic Mechanical Behavior of Composite Materials";
Vortrag: ECCM 13 - 13th European Conference on Composite Materials,
Stockholm;
02.06.2008
- 05.06.2008; in: "Proceedings of ECCM 13",
(2008),
Paper-Nr. 1216,
10 S.
Zusätzliche Informationen
-
D. H. Pahr, H. J. Böhm:
"Modelling Residual Stresses of Perforated Woven Laminates Using FEM";
Vortrag: Sixth International Congress on Thermal Stresses,
Wien;
26.05.2005
- 29.05.2005; in: "Proceedings of the Sixth International Congress on Thermal Stresses",
F. Ziegler, R. Heuer, C. Adam (Hrg.);
(2005),
ISBN: 3-901167-12-9;
S. 787
- 790.
-
D. H. Pahr, C. Schuecker, F. G. Rammerstorfer, H. E. Pettermann:
"Investigations of Perforated Laminates in the Presence of Residual Stress";
Vortrag: 11th European Conference on Composite Materials,
Rhodos;
31.05.2004
- 03.06.2004; in: "ECCM11 Book of Abstracts",
C. Galiotis (Hrg.);
Vol.1
(2004),
S. 352
- 353.
Zusätzliche Informationen
-
D. H. Pahr, U. Wolfram, M. Kinzl:
"A Crushable Foam Material Model for Strength Predictions of Human Bone";
Vortrag: 11th World Congress on Compuational Mechanics (WCCM XI),
Barcelona;
20.07.2014
- 25.07.2014; in: "Abstracts of the 11th World Congress on Compuational Mechanics",
CIMNE,
Barcelona
(2014),
ISBN: 978-84-942844-7-2.
-
T. Palau, A. Kuhn, S. Nogales, H. J. Böhm, A. Rauh:
"A Neural Network Based Elasto-Plasticity Material Model";
Vortrag: ECCOMAS 2012 (European Congress on Computational Methods in Applied Sciences and Engineering,
Wien (eingeladen);
10.09.2012
- 14.09.2012; in: "CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)",
J. Eberhardsteiner, H. J. Böhm, F. G. Rammerstorfer (Hrg.);
TU Wien,
Wien
(2012),
ISBN: 978-3-9502481-9-7;
Paper-Nr. 3112,
10 S.
Zusätzliche Informationen
-
H. E. Pettermann, J. Broger, J. Gager:
"Nonlinear Predictions in Laminated Composites and Structures";
Vortrag: 11th World Congress on Compuational Mechanics (WCCM XI),
Barcelona;
20.07.2014
- 25.07.2014; in: "Proceedings of the 11th World Congress on Compuational Mechanics",
E. Oñate, X. Oliver, A. Huerta (Hrg.);
CIMNE,
Barcelona
(2014),
ISBN: 978-84-942844-7-2;
S. 3727
- 3733.
Zusätzliche Informationen
-
H. E. Pettermann, C. Cheyrou, A. DeSimone:
"An Anisotropic Linear Viscoelastic Constitutive Law - Direction Dependent Time Temperature Shift Functions";
Hauptvortrag: 7th ECCOMAS Thematic Conference on the Mechanical Response of Composites,
Girona (eingeladen);
18.09.2019
- 20.09.2019; in: "Proceedings of the 7th ECCOMAS Thematic Conference on the Mechanical Response of Composites",
A. Turon, P. Maimí, M. Fagerström (Hrg.);
(2019),
S. 35
- 44.
-
H. E. Pettermann, A. De Simone:
"A Linear Thermo-Viscoelastic Orthotropic Constitutve Law - Application to Composites";
Vortrag: ECCM17 - 17th European Conference on Composite Materials,
München;
26.06.2016
- 30.06.2016; in: "ECCM17 - 17th European Conference on Composite Materials",
K. Drechsler (Hrg.);
European Society for Composite Materials,
(2016),
ISBN: 978-3-00-053387-7;
Paper-Nr. TUE-1_BUD_3.05-1,
8 S.
Zusätzliche Informationen
-
H. E. Pettermann, J. Gager, A. Kholkin, M. Fleischmann, M. Wolfahrt, G. Pinter:
"Simulations and Experiments of Three Point Bending Laminates with Ply Failure and Delamination";
Vortrag: DFC12/SI6 Designing Composite Materials: Avoiding Large Structural Failures,
Cambridge;
08.04.2013
- 11.04.2013; in: "Deformation and Fracture of Composites (DFC-12) & Structural Integrity and Multi-scale Modelling (SI-6)",
University of Sheffield,
(2013),
Paper-Nr. S13T2,
2 S.
-
H. E. Pettermann, J. Gager, E. Rama Lista, T. Flatscher:
"Elasto-Plasto-Damage Modeling of Laminated Composites";
Vortrag: ECCOMAS 2012 (European Congress on Computational Methods in Applied Sciences and Engineering,
Wien (eingeladen);
10.09.2012
- 14.09.2012; in: "CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)",
J. Eberhardsteiner, H. J. Böhm, F. G. Rammerstorfer (Hrg.);
TU Wien,
Wien
(2012),
ISBN: 978-3-9502481-9-7;
Paper-Nr. 3717,
7 S.
Zusätzliche Informationen
-
H. E. Pettermann, C.O. Huber, M.H. Luxner, S. Nogales, H. J. Böhm:
"An Incremental Mori-Tanaka Approach for Finite Strain Elastoplasticity of Particulate MMCs";
Vortrag: Plasticity '10: The Sixteenth International Symposium on Plasticity and its Current Applications,
St. Kitts;
03.01.2010
- 08.01.2010; in: "Proceedings of Plasticity '10",
A.S. Khan, B. Farrokh (Hrg.);
NEAT Press, Fulton, MD,
(2010),
ISBN: 0-9659463-2-0;
S. 133
- 135.
Zusätzliche Informationen
-
H. E. Pettermann, E. Rama Lista, J. Gager:
"Delamination Induced Ply Damage - Nonlinear Simulations Accounting for Degradation of Layer and Interface Properties Simultaneously";
Vortrag: Composites 2013,
San Miguel, Azores;
25.09.2013
- 27.09.2013; in: "COMPOSITES 2013",
A. Suleman, P.P. Camanho (Hrg.);
IDMEC,
Lisboa
(2013),
Paper-Nr. 31,
9 S.
Zusätzliche Informationen
-
A. F. Plankensteiner, D. Duschlbauer, O. Coube, H. E. Pettermann, H. J. Böhm:
"Numerical and Experimental Analysis of Pore Shape Evolution of Sintered Molybdenum under Triaxial Loading Condition";
Vortrag: Pm Tec 2003,
Las Vegas, NV;
08.07.2003
- 12.07.2003; in: "Advances in Powder Metallurgy and Particulate Metals - 2003",
MPIF, Princeton, NJ,
(2003),
ISBN: 1-878954-96-2;
S. 108
- 119.
Zusätzliche Informationen
-
C. Räth, D. Müller, I. Sidorenko, R. Monetti, F. Eckstein, M. Matsuura, E.M. Lochmüller, P.K. Zysset, J.S. Bauer:
"Scaling Relations between Bone Volume and Bone Structure as Found Using 3D μCT Images of the Trabecular Bone Taken from Different Skeletal Sites";
Vortrag: SPIE Conference on Medical Imaging 2010: Biomedical Applications in Molecular, Structural, and Functional Imaging,
San Diegeo, CA;
14.02.2010; in: "Medical Imaging 2010: Biomedical Applications in Molecular, Structural, and Functional Imaging, SPIE 7626",
R.C. Molthen, J.B. Weaver (Hrg.);
SPIE,
Bellingham, WA
(2010).
Zusätzliche Informationen
-
F. G. Rammerstorfer:
"Status and Trends in Lightweight Materials and Structures";
Vortrag: 90th Anniversary Conference "Vision of Engineering",
Zagreb (eingeladen);
09.11.2009; in: "Visions of Engineering",
Izvor Grubisić (Hrg.);
University of Zagreb,
Zagreb
(2009),
ISBN: 978-953-6313-75-4;
S. 21
- 32.
-
F. G. Rammerstorfer, C. Bilik:
"Increase of Buckling Resistance of Thin-Walled Structures Without Changing Mass, Material, Geometry or Boundary Conditions";
Vortrag: ECCOMAS 2012 (European Congress on Computational Methods in Applied Sciences and Engineering,
Wien (eingeladen);
10.09.2012
- 14.09.2012; in: "CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)",
J. Eberhardsteiner, H. J. Böhm, F. G. Rammerstorfer (Hrg.);
TU Wien,
Wien
(2012),
ISBN: 978-3-9502481-9-7;
Paper-Nr. 2756,
2 S.
-
F. G. Rammerstorfer, R.D. Bitsche, T. Daxner, F.D. Fischer, T. Flatscher, D. H. Pahr:
"Computational Stability Analysis - Bridging the Length Scales";
Vortrag: Taiwan-Austria Joint Workshop on Computational Mechanics of Materials and Structures,
Taipei (eingeladen);
15.11.2008
- 17.11.2008; in: "Proceedings of the Taiwan-Austria Joint Workshop on Computational Mechanics of Materials and Structures",
Y.B. Yang (Hrg.);
National Taiwan University,
(2008),
S. 28
- 30.
Zusätzliche Informationen
-
F. G. Rammerstorfer, T. Daxner, D. H. Pahr, W.K. Vonach:
"Shell and Truss Structures on the Micro- and Meso-Level of Lightweight Materials";
Vortrag: 5th International Conference on Computation of Shell and Spatial Structures,
Salzburg (eingeladen);
01.06.2005
- 04.06.2005; in: "Extended Abstracts of the 5th International Conference on Computation of Shell and Spatial Structures",
E. Ramm, W.A. Wall, K.U. Bletzinger, M. Bischoff (Hrg.);
(2005),
Paper-Nr. 132,
4 S.
Zusätzliche Informationen
-
F. G. Rammerstorfer, F. Toth, F.D. Fischer:
"Loss of Stability of Structures under Global Tension - Modeling and Simulation of Some Typical Examples";
Hauptvortrag: 11th World Congress on Compuational Mechanics (WCCM XI),
Barcelona (eingeladen);
20.07.2014
- 25.07.2014; in: "Abstracts of the 11th World Congress on Compuational Mechanics",
CIMNE,
Barcelona
(2014),
ISBN: 978-84-942844-7-2.
-
A. Rasool, H. J. Böhm:
"A Study of Thermo-Mechanical Properties of Composite Materials Reinforced with Polyhedral Shaped Particles";
Poster: Junior Scientist Conference 2010,
Wien;
07.04.2010
- 09.04.2010; in: "Proceedings of the Junior Scientist Conference 2010",
H. Kaiser, R. Kirner (Hrg.);
(2010),
ISBN: 978-3-200-01797-9;
S. 147
- 148.
Zusätzliche Informationen
-
A.G. Reisinger, M. Frank, P.J. Thurner, D. Pahr:
"Elasto-Visco-Plastic Material Parameters of Single Trabeculae Identified by Rheological Modelling";
Vortrag: 25th Congress of the European Society of Biomechanics,
Vienna;
07.07.2019
- 10.07.2019; in: "Book of Abstracts of the 25th Congress of the European Society of Biomechanics",
TU Verlag,
(2019),
ISBN: 978-3-903024-96-0;
S. 182.
-
A.G. Reisinger, D. H. Pahr, P.K. Zysset:
"Anisotropy of Bone Lamellae";
Poster: Junior Scientist Conference 2010,
Wien;
07.04.2010
- 09.04.2010; in: "Proceedings of the Junior Scientist Conference 2010",
H. Kaiser, R. Kirner (Hrg.);
(2010),
ISBN: 978-3-200-01797-9;
S. 155
- 156.
Zusätzliche Informationen
-
A.G. Reisinger, D. H. Pahr, P.K. Zysset:
"The Anisotropy of Bone Lamellae as a Function of Diverse Fibril Orientation Patterns";
Vortrag: 6th World Congress of Biomechanics (WCB 2010),
Singapore;
01.08.2010
- 10.08.2010; in: "6th World Congress of Biomechanics (WCB 2010)",
C.T. Lim, J.C.H. Goh (Hrg.);
Springer-Verlag,
Heidelberg
(2010),
ISBN: 978-3-642-14514-8;
S. 1667
- 1670.
Zusätzliche Informationen
-
M. Reiter, H. Truong, S. Dustdar, D. Karastoyanova, R. Krause, F. Leymann, D. H. Pahr:
"On Analyzing Quality of Data Influences on Performance of Finite Elements Driven Computational Simulations";
Vortrag: 18th International European Conference on Parallel and Distributed Computing, Euro-Par 2012,
Rhodes Island, Greece;
27.08.2012
- 31.08.2012; in: "Euro-Par 2012 Parallel Processing 18th International Conference",
C. Kaklamanis, T. Papatheodorou, P. Spirakis (Hrg.);
Springer,
LNCS 7484
(2012),
ISBN: 978-3-642-32819-0;
S. 793
- 804.
Zusätzliche Informationen
-
A. Rohatschek, O.G. Andriotis, P. Steinbauer, S. Baudis, C. Dworak, P.J. Thurner:
"Experimental Mechanics of Individual Collagen Molecules";
Vortrag: 25th Congress of the European Society of Biomechanics,
Vienna;
07.07.2019
- 10.07.2019; in: "Book of Abstracts of the 25th Congress of the European Society of Biomechanics",
TU Verlag,
(2019),
ISBN: 978-3-903024-96-0;
S. 132.
-
C. Schuecker, H. E. Pettermann:
"A Mechanism Based Damage Meso-Model for Fiber Reinforced Laminates";
Vortrag: Fifteenth Internacional Conference on Composite Materials (ICCM-15),
Durban;
27.06.2005
- 01.07.2005; in: "Fifteenth International Conference on Composite Materials - Extended Abstracts",
V.E. Verijenko, S. Adali, E. Morosov, C.J. von Klemperer (Hrg.);
(2005),
S. 245
- 246.
Zusätzliche Informationen
-
C. Schuecker, H. E. Pettermann:
"Combining Progressive Damage with Plasticity to Model the Non-linear Behavior of Fiber Reinforced Laminates";
Vortrag: ECCOMAS Composites 2007,
Porto;
12.09.2007
- 14.09.2007; in: "ECCOMAS Thematic Conference Mechanical Response of Composites",
P.P. Camanho, C.G. Dávila, S.T. Pinho, J.J.C. Remmers (Hrg.);
ECCOMAS,
Universidade do Porto
(2007),
Paper-Nr. 41,
14 S.
Zusätzliche Informationen
-
M. Schwab, J. Gager, H. E. Pettermann:
"Assessing Material Nonlinearities in Large Composite Structures by Predicting Energy Dissipations at the Mesoscale";
Vortrag: 11th World Congress on Compuational Mechanics (WCCM XI),
Barcelona;
20.07.2014
- 25.07.2014; in: "Proceedings of the 11th World Congress on Compuational Mechanics",
E. Oñate, X. Oliver, A. Huerta (Hrg.);
CIMNE,
Barcelona
(2014),
ISBN: 978-84-942844-7-2;
S. 3691
- 3702.
Zusätzliche Informationen
-
M. Schwab, H. E. Pettermann:
"Prediction of the Energy Absorption Behaviour of Large Composite Components Subjected to Impact Loads - Assessment of Individual Mechanisms at Ply Scale";
Vortrag: ECCM17 - 17th European Conference on Composite Materials,
München;
26.06.2016
- 30.06.2016; in: "ECCM17 - 17th European Conference on Composite Materials",
K. Drechsler (Hrg.);
European Society for Composite Materials,
(2016),
ISBN: 978-3-00-053387-7;
Paper-Nr. TUE-2_BIA_3.11-22,
7 S.
Zusätzliche Informationen
-
M. Schwab, M. Todt, H. E. Pettermann:
"A Multiscale Modelling Approach for Simulating Impact Damage in Woven Composite Laminates";
Vortrag: 5th ECCOMAS Thematic Conference on the Mechanical Response of Composites (COMPOSITES 2015),
Bristol;
07.09.2015
- 09.09.2015; in: "Proceedings of the 5th ECCOMAS Thematic Conference on the Mechanical Response of Composites",
S.R. Hallett, J.J.C. Remmers (Hrg.);
Bristol University,
(2015),
12 S.
Zusätzliche Informationen
-
M. Schwab, M. Todt, H. E. Pettermann:
"Simulation of Ply Damage and Delamination in Laminated Composites Under Impact Loading";
Vortrag: 8th Workshop on Dynamic Behaviour of Materials and its Applications in Industrial Processes,
Warschau;
25.06.2014
- 27.06.2014; in: "Dynamic Behaviour of Materials and its Applications in Industrial Processes",
(2014),
S. 23
- 24.
-
M. Schwab, M. Todt, H. E. Pettermann:
"Simulation of the Intermediate Velocity Impact Behavior of Woven Composite Laminate Applying Progressive Damage Models for Plies and Interfaces";
Vortrag: 20th International Conference on Composite Materials (ICCM-20),
Kopenhagen;
19.07.2015
- 24.07.2015; in: "Proceedings of the 20th International Conference on Composite Materials (ICCM-20)",
O.T. Thomsen, C. Berggreen, B.F. Sørensen (Hrg.);
(2015),
Paper-Nr. 4417-4,
11 S.
Zusätzliche Informationen
-
I. Sidorenko, J.S. Bauer, R. Monetti, D. Müller, E. Rummeny, F. Eckstein, M. Matsuura, E.M. Lochmüller, P.K. Zysset, C. Räth:
"Role of Tabecular Microfractures in Failure of Human Vertebrae Estimated by the Finite Element Method";
Vortrag: SPIE Conference on Medical Imaging 2009: Biomedical Applications in Molecular, Structural, and Functional Imaging,
Lake Bueno Vista, FLA;
08.02.2009; in: "Medical Imaging 2009: Biomedical Applications in Molecular, Structural, and Functional Imaging, SPIE 7626",
X.P. Hu, A.V. Clough (Hrg.);
SPIE,
Bellingham, WA
(2009).
Zusätzliche Informationen
-
F. Sinzinger, D. H. Pahr, R. Moreno:
"Predicting the Trabecular Bone Stiffness Tensor with Spherical Convolutional Neural Networks";
Vortrag: 25th Congress of the European Society of Biomechanics,
Vienna;
07.07.2019
- 10.07.2019; in: "Book of Abstracts of the 25th Congress of the European Society of Biomechanics",
TU Verlag,
(2019),
ISBN: 978-3-903024-96-0;
S. 164.
-
I.C. Skrna-Jakl, D. H. Pahr, F. G. Rammerstorfer:
"Multiscale Computational Design of Large Scale Corrugated Core Sandwich Structures";
Vortrag: ECCOMAS 2012 (European Congress on Computational Methods in Applied Sciences and Engineering,
Wien (eingeladen);
10.09.2012
- 14.09.2012; in: "CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)",
J. Eberhardsteiner, H. J. Böhm, F. G. Rammerstorfer (Hrg.);
TU Wien,
Wien
(2012),
ISBN: 978-3-9502481-9-7;
Paper-Nr. 1514,
2 S.
-
M. Springer, M. Nelhiebel, H. E. Pettermann:
"Combined Simulation of Fatigue Crack Nucleation and Propagation Based on a Damage Indicator";
Vortrag: ICMFF11, 11th International Conference on Multiaxial Fatigue and Fracture,
Sevilla;
01.06.2016
- 03.06.2016; in: "Proceedings of the 11th International Conference on Multiaxial Fatigue and Fracture",
ETSI, Universidad de Sevilla,
Sevilla
(2016),
Paper-Nr. 00100-0098,
8 S.
Zusätzliche Informationen
-
M. Springer, M. Nelhiebel, H. E. Pettermann:
"Fatigue Crack Growth Modeling in the Metallization of Power Semiconductors under Cyclic Thermo-Mechanical Loading";
Vortrag: 17th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE),
Montpellier;
17.04.2016
- 20.04.2016; in: "Proceedings of the 7th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE)",
IEEE,
CFP16566-USB
(2016),
ISBN: 978-1-5090-2120-8.
Zusätzliche Informationen
-
M. Springer, H. E. Pettermann:
"A Thermo-Mechanical Fatigue Damage Modeling Methodology for Power Semiconductor Robustness Validation Studies";
Vortrag: 19 th Annual International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE 2018),
Toulouse, France;
15.04.2018
- 18.04.2018; in: "Proceedings of the 19 th Annual International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems",
W.D. Van Driel, P. Rodgers, Ch. Bailey, B. Vandevelde, O. de Saint Leger, G.Q. Zhang (Hrg.);
(2018),
ISBN: 978-1-5386-2358-9;
8 S.
-
M. Springer, A. Turon, H. E. Pettermann:
"A Cyclic Cohesive Zone Model Accounting for Changes in the Fatigue Crack Growth Rate Caused by Variable Amplitude Loading and Pre-damaged Interfaces";
Vortrag: 19th International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics (42nd National Symposium on Fatigue and Fracture Mechanics),
Denver, Colorado, USA;
15.05.2019
- 17.05.2019; in: "Proceedings of the 19th International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics (42nd National Symposium on Fatigue and Fracture Mechanics)",
(2019),
S. 1
- 6.
Zusätzliche Informationen
-
M. Springer, A. Turon, H. E. Pettermann:
"A Cyclic Cohesive Zone Model for Variable Amplitude Loading and Mixed Mode Behavior";
Vortrag: 6th ECCOMAS Thematic Conference on the Mechanical Response of Composites: COMPOSITES 2017,
Eindhoven;
20.09.2017
- 22.09.2017; in: "6th ECCOMAS Thematic Conference on the Mechanical Response of Composites: COMPOSITES 2017",
J.J.C. Remmers, A. Turon (Hrg.);
TU Eindhoven,
(2017),
S. 48
- 59.
Zusätzliche Informationen
-
J. Stampfl, M.H. Luxner, H. E. Pettermann, A. Woesz, P. Fratzl:
"Rapid Prototyping and Modelling of cellular solids";
Vortrag: Euromat 2005,
Prag;
05.09.2005
- 08.09.2005; in: "Euromat 2005 European Congress on Advanced Materials and Processes",
DGM,
http://www.dgm.de/past/2005/euromat2005/programme/
(2005),
Paper-Nr. C12-614,
1 S.
Zusätzliche Informationen
-
J. Stampfl, M. Schuster, R. Inführ, R. Liska, M.H. Luxner, H. E. Pettermann, F. Varga, C. Turecek:
"Rapid Prototyping als Fertigungswerkzeug zur Herstellung zellularer Strukturen";
Vortrag: 52. Metallkunde Kolloquium,
Lech am Arlberg;
19.04.2006
- 21.04.2006; in: "52. Metallkunde-Kolloquium: Werkstoffforschung für Wirtschaft und Gesellschaft",
(2006),
S. #.
Zusätzliche Informationen
-
A. Starlinger, P. Casagrande, H. J. Böhm:
"Die Entwicklung einer automatisierten Auswerteroutine zur Ermüdungsauswertung von Schienenfahrzeugkomponenten";
Vortrag: 33. Tagung des DVM-Arbeitskreises Betreibsfestigkeit,
Steyr;
11.10.2006
- 12.10.2006; in: "Betriebsfestigkeit in der virtuellen Produktentwicklung",
C.M. Sonsino (Hrg.);
(2006),
ISSN: 0944-5242;
S. 291
- 295.
Zusätzliche Informationen
-
P. Steinbauer, C. Dworak, P.J. Thurner, O.G. Andriotis, R. Liska:
"Phosporus-Based Raft Polymers for Bio Adhesion";
Poster: Danube Vltava Sava Polymer Meeting 2017,
Wien;
05.09.2017
- 08.09.2017; in: "Danube Vltava Sava Polymer Meeting 2017",
Book of Abstracts.com,
(2017),
ISBN: 978-3-9504017-6-9;
S. PO-25.
Zusätzliche Informationen
-
P. Steinbauer, J. Kotmel, A. Rohatschek, O.G. Andriotis, R. Liska, P.J. Thurner, S. Baudis:
"Single-Molecule Force Spectroscopy Measurement of natural and biomimetic Adhesion Motifs";
Vortrag: ICBBA 2021 - 4th International Conference on Biological and Biomimetic Adhesives,
Aveiro Portugal;
18.02.2021
- 19.02.2021; in: "4th International Conference on Biological and Biomimetic Adhesives",
(2021),
S. 66.
Zusätzliche Informationen
-
P. Steinbauer, A. Rohatschek, O.G. Andriotis, S. Baudis, P.J. Thurner, R. Liska:
"Raft Polymers as Adhesion Motifs for Bone Glue Applications";
Vortrag: VSS 2018 - Vienna Young Scientists Symposium,
Wien;
07.06.2018
- 08.06.2018; in: "VSS 2018",
Book-of-Abstracts.com,
(2018),
ISBN: 978-3-9504017-8-3;
S. 108
- 109.
Zusätzliche Informationen
-
P. Steinbauer, A. Rohatschek, O.G. Andriotis, R. Liska, P.J. Thurner, S. Baudis:
"Adhesion motifs for bone glue applications";
Vortrag: Austrian Bone Conference - ABC 2018,
Wien;
23.11.2018
- 24.11.2018; in: "Austrian Bone Conference - ABC 2018",
Wiener Medizinische Wochenschrift; Springer-Verlag Austria,
November 2018, Volume 168, Supplement 2
(2018),
ISSN: 0043-5341;
S. 454.
Zusätzliche Informationen
-
P. Steinbauer, A. Rohatschek, O.G. Andriotis, P.J. Thurner, R. Liska, S. Baudis:
"Adhesion Forces of selected Bone-binding Motifs determined via Single Molecule Force Spectroscopy";
Vortrag: Termis Eu 2019,
Rhodes, Greece;
27.05.2019
- 31.05.2019; in: "Termis Eu 2019",
(2019),
S. 1248.
Zusätzliche Informationen
-
J. Steindl, K. Ehrmann, C. Gorsche, C. Huang, T. Koch, P. Steinbauer, A. Rohatschek, O.G. Andriotis, P.J. Thurner, J. Stampfl, R. Liska:
"Maleimide-Styrene-Butadiene Terpolymers As Tough Photopolymers For Additive Manufacturing";
Vortrag: The 6th (virtual) European Symposium of Photopolymer Science,
Wien;
15.06.2021
- 17.06.2021; in: "vESPS 2021",
(2021),
ISBN: 978-3-9504809-3-1;
S. 92.
-
L. Steiner, D. H. Pahr:
"Statistical Deformation Model Based Estimation of 3D Models from 2D Projections Can Be Used to Predict Human Femoral Strength";
Poster: 25th Congress of the European Society of Biomechanics,
Vienna;
07.07.2019
- 10.07.2019; in: "Book of Abstracts of the 25th Congress of the European Society of Biomechanics",
TU Verlag,
(2019),
ISBN: 978-3-903024-96-0;
S. 634.
-
M. Stipsitz, P.K. Zysset, D. Pahr:
"Failure Behavior of Trabecular Bone Based on Materially Nonlinear Micro FE Simulations";
Vortrag: 25th Congress of the European Society of Biomechanics,
Vienna;
07.07.2019
- 10.07.2019; in: "Book of Abstracts of the 25th Congress of the European Society of Biomechanics",
TU Verlag,
(2019),
ISBN: 978-3-903024-96-0;
S. 270.
-
A. Synek, S.C. Lu, T.L. Kivell, S. Nauwelaerts, D. H. Pahr:
"Metacarpophalangeal Joint Loads of Bonobos During Different Locomotor Modes: Proxies vs. Model Predictions";
Vortrag: 25th Congress of the European Society of Biomechanics,
Vienna;
07.07.2019
- 10.07.2019; in: "Book of Abstracts of the 25th Congress of the European Society of Biomechanics",
TU Verlag,
(2019),
ISBN: 978-3-903024-96-0;
S. 25.
-
A. Synek, S.C. Lu, E.E. Vereecke, T.L. Kivell, D. H. Pahr:
"Identifying Optimal Tendon Path Parameters Of A Musculoskeletal Human Finger Model";
Vortrag: 25th Congress of the European Society of Biomechanics,
Vienna;
07.07.2019
- 10.07.2019; in: "Book of Abstracts of the 25th Congress of the European Society of Biomechanics",
TU Verlag,
(2019),
ISBN: 978-3-903024-96-0;
S. 447.
-
M. Todt, M.A. Hartmann, O. Paris, F.D. Fischer, F. G. Rammerstorfer:
"Computational Treatment of the Stability of Multi-Layered Carbon Nanoparticles";
Vortrag: 7th International Conference on Computational Mechanics of Spatial Structures (IASS-IACM 2012),
Sarajevo;
02.04.2012
- 04.04.2012; in: "Proceedings of the 7th International Conference on Computational Mechanics of Spatial Structures",
A. Ibrahimbegovic, S Dolarevic, M. Hrasnica, M. Madzarevic, M. Zlatar (Hrg.);
Faculty of Civil Engineering Sarajevo,
(2012),
ISBN: 978-9-958-63830-5;
S. 307
- 309.
Zusätzliche Informationen
-
M. Todt, F. G. Rammerstorfer:
"On the van der Waals Interactions Between Carbon Onion Layers";
Poster: Junior Scientist Conference 2010,
Wien;
07.04.2010
- 09.04.2010; in: "Proceedings of the Junior Scientist Conference 2010",
H. Kaiser, R. Kirner (Hrg.);
(2010),
ISBN: 978-3-200-01797-9;
S. 215
- 216.
Zusätzliche Informationen
-
M. Todt, F. G. Rammerstorfer, M.A. Hartmann:
"Continuum Shell Models for Closed Cage Carbon Nanoparticles";
Vortrag: SSTA2013 Shell Structures Theory and Applications,
Gdansk;
16.10.2013
- 18.10.2013; in: "Shell Structures: Theory and Applications",
W. Pietraszkiewicz, J. Górski (Hrg.);
CRC Press/Balkema,
Leiden
(2013),
ISBN: 978-1-138-00082-7;
S. 149
- 152.
Zusätzliche Informationen
-
M. Todt, F. G. Rammerstorfer, M.A. Hartmann, O. Paris, F.D. Fischer:
"Shell-Models for Multi-Layer Carbon Nano-Particles;";
Vortrag: EC 527 Shell-Like Structures - Non-Classical Theories and Applications,
Wittenberg (eingeladen);
22.08.2011
- 26.08.2011; in: "Shell-Like Structures",
H. Altenbach, V.A. Eremeyev (Hrg.);
Springer-Verlag,
Berlin
(2011),
ISBN: 978-3-642-21854-5;
S. 585
- 602.
Zusätzliche Informationen
-
F. Toth, M.J. Cordill, F.D. Fischer, F. G. Rammerstorfer:
"Modeling and Simulation of an Experiment for Determining the Interface Strength Parameters of Thin Films on Compliant Substrates";
Vortrag: ECCOMAS 2012 (European Congress on Computational Methods in Applied Sciences and Engineering,
Wien (eingeladen);
10.09.2012
- 14.09.2012; in: "CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)",
J. Eberhardsteiner, H. J. Böhm, F. G. Rammerstorfer (Hrg.);
TU Wien,
Wien
(2012),
ISBN: 978-3-9502481-9-7;
Paper-Nr. 4219,
2 S.
-
F. Toth, M. Kaltenbacher, F. G. Rammerstorfer:
"Modelling of Air Chamber Supported Floating Platforms - Coupling Free Surface Flow, Compressible Air, and Flexible Structures";
Vortrag: VI International Conference on Coupled Problems in Science and Engineering,
Venedig;
18.05.2015
- 20.05.2015; in: "Coupled Problems in Science and Engineering",
B.A. Schrefler, E. Oñate, M. Papadrakakis (Hrg.);
CIMNE,
Barcelona, Spanien
(2015),
ISBN: 978-84-943928-3-2;
S. 346
- 357.
Zusätzliche Informationen
-
F. Toth, F. G. Rammerstorfer, M.J. Cordill, F.D. Fischer:
"Modelling of Thin Film Buckling in Compound Specimens under Uniaxial Stretching";
Vortrag: SSTA2013 Shell Structures Theory and Applications,
Gdansk;
16.10.2013
- 18.10.2013; in: "Shell strucutres: Theory and Applications (Vol.3)",
W. Pietraszkiewicz, J. Górski (Hrg.);
CRC Press/Balkema,
Leiden
(2013),
ISBN: 978-1-138-00082-7;
S. 247
- 250.
Zusätzliche Informationen
-
S. Ucsnik, R. Gradinger, U. Noster, D. H. Pahr:
"Finite-Element-Methods Based Optimization of a Novel Composite-Metal Joint";
Vortrag: 1st EUCOMAS,
Berlin;
26.05.2008
- 27.05.2008; in: "Proceedings of the 1st EUCOMAS",
VDI-Verlag,
(2008),
ISBN: 978-3-18-092028-3;
S. 371
- 379.
Zusätzliche Informationen
-
G. Wimmer, H. E. Pettermann:
"Simulation of Delamination in Laminate Composite Components - A Fracture Mechanics Based Method";
Vortrag: ECCOMAS Composites 2007,
Porto;
12.09.2007
- 14.09.2007; in: "ECCOMAS Thematic Conference Mechanical Response of Composites",
P.P. Camanho, C.G. Dávila, S.T. Pinho, J.J.C. Remmers (Hrg.);
ECCOMAS,
Universidade do Porto
(2007),
Paper-Nr. 32,
13 S.
Zusätzliche Informationen
-
G. Wimmer, M. Roldán Galán, H. E. Pettermann:
"A Semi-Analytical Approach for the Simulation of Delamination Growth under Quasi-Static and Cyclic Loading";
Vortrag: ECCM 13 - 13th European Conference on Composite Materials,
Stockholm;
02.06.2008
- 05.06.2008; in: "Proc. ECCM 13",
(2008),
Paper-Nr. 528,
10 S.
Zusätzliche Informationen
-
M. Wolfahrt, J. Cichosz, J. Gager, R.T. Hinterhölzl, H. E. Pettermann, S. Frieß, G. Pinter, J. Noisternig:
"Werkstoffcharakterisierung, Materialmodellierung und Simulation von CFK-Geflechtlaminaten";
Vortrag: 20. Leobner Kunststoffkolloquium Polymerer Leichtbau,
Leoben;
10.11.2011
- 11.11.2011; in: "20. Leobner Kunststoff-Kolloquium",
Montanuniversität Leoben,
(2011),
S. 101
- 110.
Zusätzliche Informationen
-
T Zandrini, S. Sayer, M. Markovic, J. Van Hoorick, O.G. Andriotis, P.J. Thurner, S. Van Vlierberghe, A. Ovsianikov:
"Guided cell migration and vascular sprouts formation through high-definition laser grafting";
Vortrag: TERMIS,
Virtual;
15.11.2021
- 19.11.2021; in: "Abstract book",
(2021),
S. 969.
-
S. Zigon-Branc, M. Markovic, J. Van Hoorick, O.G. Andriotis, E. Zerobin, S. Baudis, P.J. Thurner, P. Dubruel, S. Van Vlierberghe, A. Ovsianikov:
"3D Differentiation of human Adipose-derived stem cells/hTERT in Methacrylate Gelatin Hydrogels with Different Stiffness";
Poster: TERMIS World Congress 2018,
Kyoto;
04.09.2018
- 07.09.2018; in: "Abstract Book",
(2018),
S. 603.
Zusätzliche Informationen
Vorträge und Posterpräsentationen (ohne Tagungsband-Eintrag)
-
A. Ableidinger, T. Daxner, H. J. Böhm, F. G. Rammerstorfer:
"Micro/Macro Simulations of Fracture in Open Cell Metallic Foams";
Vortrag: 5th Euromech Solid Mechanics Conference ESMC-5,
Thessaloniki;
17.08.2003
- 22.08.2003.
-
M. Ahmadi, O.G. Andriotis, A. Hochwallner, P.J. Thurner, J. Stampfl:
"Phase Separation in (Meth)acrylate-based Photopolymers";
Vortrag: ESIAM,
Vienna;
09.09.2019
- 11.09.2019.
-
M. Ahmadi, A. Hochwallner, O.G. Andriotis, P.J. Thurner, J. Stampfl:
"Characterization of Phase-Separated (Meth)acrylate Photopolymers";
Poster: EUROMAT 2021,
Wien;
13.09.2021
- 17.09.2021.
-
M. Amini, D. Pahr:
"Influence of size-scaling on the mechanical behavior of printed bone microstructure";
Vortrag: The First International Conference on Materials, Mimicking, Manufacturing from and for Bio Application,
Milan, Italy;
27.06.2018
- 29.06.2018.
-
M. Amini, D. H. Pahr:
"Parameters Affecting 3D Printing of Bone Structures";
Vortrag: 23rd Congress of the European Society of Biomechanics,
Sevilla;
02.07.2017
- 05.07.2017.
-
M. Amini, A.G. Reisinger, D. Pahr:
"An enhanced biomechanical femoral test setup to study multiple loading configurations in stance and sideways fall orientations on the same specimen";
Vortrag: 8th World Congress of Biomechanics, WCB 2018,
Dublin;
08.07.2018
- 12.07.2018.
-
P. Ammann, P.K. Zysset, R. Rizzoli:
"Better comprehension of the bone mechanical properties using animal models and recent technological developments";
Vortrag: 16th International Bone Densitometry Workshop,
Annecy;
20.06.2004
- 24.06.2004.
-
N. Amraish, A.G. Reisinger, D. H. Pahr:
"Measurement Of Linear Strain Fields By Means Of Digital Image Correlation";
Vortrag: 26th Congress of the European Society of Biomechanics - ESBiomech,
Mailand;
11.07.2021
- 14.07.2021.
-
O.G. Andriotis:
"Age-Related Differences In Nanoscale and Microscale Mechanics of Equine Tendon";
Poster: Orthopaedic Research Society 2018 Annual Meeting (ORS 2018),
New Orleans;
10.03.2018
- 13.03.2018.
-
O.G. Andriotis:
"Collagen micro- and nanomechanics research at ILSB: an update";
Vortrag: Austrian Cluster for Tissue Regeneration Annual Meeting 2021,
Vienna;
30.08.2021
- 31.08.2021.
-
O.G. Andriotis, S. Desissaire, P.J. Thurner:
"Collagen Fibril Stiffness is Sensitive to Osmotic Stress";
Vortrag: 22nd Congress of the European Society of Biomechanics (ESB 2016),
Lyon;
10.07.2016
- 13.07.2016.
-
O.G. Andriotis, S. Desissaire, P.J. Thurner:
"Collagen Nanoelasticity is Tunable via Osmotic Pressure";
Vortrag: ASBMR 38th Annual Meeting,
Atlanta, GA;
08.09.2016
- 11.09.2016.
-
O.G. Andriotis, S. Desissaire, P.J. Thurner:
"Osmotic Stress is a Major Contributor to the Function of the Collagen Fibril";
Poster: 21st Congress of the European Society of Biomechanics,
Prag;
05.07.2015
- 08.07.2015.
-
O.G. Andriotis, K. Elsayad, P.J. Thurner:
"Collagen Fibril Water Content Is Associated to Nanostiffness";
Poster: 1st BioBrillouin Meeting - Conference on Brillouin Light Scattering Microspectroscopy for Biological and Biomedical Research and Applications,
Vienna;
13.09.2017
- 15.09.2017.
-
O.G. Andriotis, M. Handelshauser, S. Desissaire, P.J. Thurner:
"Hydration changes the tensile elasticity but not viscosity of individual collagen fibrils at low strains";
Vortrag: Austrian Cluster for Tissue Regeneration Annual Meeting 2019,
Wien;
11.03.2019
- 13.03.2019.
-
O.G. Andriotis, L. Kain, C. Thorpe, H.R.C. Screen, P.J. Thurner:
"Nanoscale and Microscale Mechanics of Equine Tendons";
Vortrag: ECCOMAS Thematic Conference on Multiscale Problems in Biomechanics and Mechanobiology (MultiBioMe 2017),
Wien;
11.09.2017
- 13.09.2017.
-
O.G. Andriotis, J. Scherübl, M. Nalbach, P.J. Thurner:
"Collagen fibril tensile properties from the OIM mouse model of osteogenesis imperfecta";
Vortrag: 8th World Congress of Biomechanics, WCB 2018,
Dublin;
08.07.2018
- 12.07.2018.
-
O.G. Andriotis, M. Vanleene, S. Shefelbine, D.E. Davies, P.H. Howarth, P.J. Thurner:
"The Very Stiff Collagen Fibril of the oim Mouse Model of Osteogenesis Imperfecta";
Poster: 7th World Congress of Biomechanics (WCB2014),
Boston, MA;
06.07.2014
- 11.07.2014.
-
O. J. Aryeetey, M. Frank, D. H. Pahr:
"Reduced Parameter Adaptive Quasi-Linear Viscoelastic (AQLV) Model of Soft Biological Tissue";
Vortrag: 26th Congress of the European Society of Biomechanics - ESBiomech,
Mailand;
11.07.2021
- 14.07.2021.
-
S. Bachmann, A. Synek, D. H. Pahr:
"A novel method for quantitative and statistical comparison of local differences in bone morphometry";
Vortrag: 17th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (CMBBE 2021),
Bonn;
07.09.2021
- 09.09.2021.
-
F.G. Barth, H. J. Böhm, B. Hößl, F. G. Rammerstorfer:
"Computational Treatment of Slit Sensilla of Spiders - Biomechanics in Neurobiology";
Vortrag: ECCOMAS Multidisciplinary Jubilee Symposium,
Wien (eingeladen);
18.02.2008
- 20.02.2008.
Zusätzliche Informationen
-
F.G. Barth, B. Hößl, H. J. Böhm, F. G. Rammerstorfer:
"From technical biology to natural technology? The remarkable refinement of spider mechano-sensors";
Vortrag: Insect Sensors and Robotics,
Brisbane (eingeladen);
23.08.2004
- 26.08.2004.
Zusätzliche Informationen
-
F.G. Barth, B. Hößl, C.F. Schaber, S. Gorb, H. J. Böhm, F. G. Rammerstorfer:
"Arthropod Mechanoreceptors: From Biology to Engineering";
Vortrag: Annual Main Meeting of the Society for Experimental Biology,
Glasgow;
31.03.2007
- 04.04.2007.
Zusätzliche Informationen
-
S. Baumbach, E. Dall´Ara, P. Weninger, A. Antoni, H. Traxler, P.K. Zysset:
"Assessment of a Novel Biomechanical Fracture Model for Distal Radius Fractures";
Vortrag: 13th European Congress of Trauma and Emergency Surgery,
Basel;
12.05.2012
- 15.05.2012.
-
S. Baumbach, R. Schmidt, P.K. Zysset:
"Where is Loco Typico for the Osteoporosis-Related Distal Radius Fracture?";
Poster: ESB2010: 17th Congress of the European Society of Biomechanics,
Edinburgh;
05.07.2010
- 08.07.2010.
Zusätzliche Informationen
-
S.F. Baumbach, A. Synek, J. Binder, W. Mutschler, W. Bäcker, G. Langs, L. Fischer:
"Vorläuferstudie zur automatischen Auswertung des distalen Schaft-volare Fläche Winkel (VCA) des distalen Radius an 40 HRpQCT 3D Datensätzen";
Vortrag: Deutscher Kongress für Orthopädie und Unfallchirurgie 2017,
Berlin;
24.10.2017
- 27.10.2017.
-
S.F. Baumbach, A. Synek, L. Borgmann, H. Traxler, E. Euler, Y. Chevalier:
"Feasibility Study on the Use of Self-Drilling and Self-Tapping LOocking Screws in Volar Plate Osteosynthesis for Distal Radius Fractures";
Vortrag: V. Münchner Symposion für Experimentelle Orthopädie, Unfallchirurgie und Muskuloskelettale Forschung,
München;
06.03.2015
- 07.03.2015.
-
S.F. Baumbach, A. Synek, H. Traxler, W. Mutschler, D. H. Pahr, Y. Chevalier:
"Biomechanical Evaluation of Distal Volar-Dorsal Screw Length in Colle`s Fractures";
Poster: 55. Kongress der Deutschen Gesellschaft für Handchirurgie,
Baden-Baden;
09.10.2014
- 11.10.2014.
-
S.F. Baumbach, A. Synek, H. Traxler, W. Mutschler, D. H. Pahr, Y. Chevalier:
"Biomechanical Evaluation of the Distal Screw Length in Volar Plate Osteosynthesis for the Treatment of Distal Radius Fractures";
Vortrag: V. Münchner Symposion für Experimentelle Orthopädie, Unfallchirurgie und Muskuloskelettale Forschung,
München;
06.03.2015
- 07.03.2015.
-
E. Benca, B. Ferrante, M. Zalaudek, L. Hirtler, A. Synek, F. Kainberger, R. Windhager, R. Brånemark, G. Hobusch, E. Unger:
"Hermal Effects During Bone Preparation For- And During Insertion Of Osseointegrated Transfemoral Implants";
Vortrag: 26th Congress of the European Society of Biomechanics - ESBiomech,
Mailand;
11.07.2021
- 14.07.2021.
-
E. Benca, A.G. Reisinger, J. Patsch, L. Hirtler, A. Synek, S. Stenicka, F. Kainberger, W. Mayr, R. Windhager, D. Pahr:
"Fracture Prediction in Patients with Metastatic Lesions in the Femur Using QCT-based Finite Element Analysis";
Vortrag: 19th ISOLS General Meeting,
Kanazawa, Japan;
10.05.2017
- 12.05.2017.
-
E. Benca, A.G. Reisinger, J. Patsch, L. Hirtler, A. Synek, S. Stenicka, F. Kainberger, R. Windhager, W. Mayr, D. H. Pahr:
"The Effect of Metastatic Lesions on the Biomechanical Behavior of the Femur";
Vortrag: 22nd Congress of the European Society of Biomechanics (ESB 2016),
Lyon;
10.07.2016
- 13.07.2016.
-
E. Benca, A. Synek, M. Amini, F. Kainberger, R. Windhager, W. Mayr, D. H. Pahr:
"Prediction of Pathologic Fractures in Femora with Metastatic Lesions Using QCT-Based Finite Element Analysis";
Vortrag: 23rd Congress of the European Society of Biomechanics,
Sevilla;
02.07.2017
- 05.07.2017.
-
R.D. Bitsche:
"Multi Material Component Design with Mathematical Methods";
Vortrag: Meeting des Projekts "Austrian Light Weight Structures",
Braunau;
04.04.2006.
Zusätzliche Informationen
-
R.D. Bitsche:
"Spannungssingularitäten in Zweistoffverbunden";
Vortrag: Meeting des Projekts "Austrian Light Weight Structures",
Braunau;
14.11.2006.
Zusätzliche Informationen
-
R.D. Bitsche, F. G. Rammerstorfer:
"Thermischer Kontaktwiderstand an Interfaces von Hybridguss-Verbindungen";
Vortrag: Meeting des Projekts "Austrian Light Weight Structures",
Braunau;
10.04.2007.
Zusätzliche Informationen
-
H. J. Böhm:
"A Short Introduction to Continuum Micromechanics";
Vortrag: CISM Course and 12th IUTAM Summer School "Mechanics of Microstructured Materials",
Udine (eingeladen);
07.07.2003
- 11.07.2003.
-
H. J. Böhm:
"A short tour through continuum micromechanics and multiscale modeling of inhomogeneous materials";
Hauptvortrag: 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019),
Vienna (eingeladen);
18.02.2019
- 22.02.2019.
Zusätzliche Informationen
-
H. J. Böhm:
"Application of Numerical Methods to Continuum Micromechanics";
Vortrag: CISM Course C1902 "Micromechanics of Internal Stresses in Multiphase Materials",
Udine (eingeladen);
20.05.2019
- 24.05.2019.
-
H. J. Böhm:
"Aspects of the Micromechanical Modeling of Discontinuously Reinforced Ductile Matrix Composites";
Vortrag: GEPPM Seminar,
Lyon (eingeladen);
26.04.2005.
-
H. J. Böhm:
"Computational Micromechanics";
Vortrag: First Summer School on Micromechanics,
Rzeszow/Bezmiechowa (eingeladen);
03.06.2015
- 13.06.2015.
-
H. J. Böhm:
"Continuum Micromechanics Modeling of Composite, Porous and Cellular Materials";
Vortrag: Workshop CompMat 2009,
Schlaining;
01.10.2009
- 02.10.2009.
-
H. J. Böhm:
"Continuum Modeling of the Thermomechanical and Thermophysical Behavior of Discontinuously Reinforced Composites";
Vortrag: Kolloquium über Werkstoffmodellierung,
Stuttgart (eingeladen);
01.07.2005.
-
H. J. Böhm:
"Effects of the Shape of Equiaxed Polyhedral Inhomogeneities on the Behavior of Inhomogeneous Materials with Matrix-Inclusion Microtopology";
Vortrag: SST/IMMC/MEMA-Seminar, UC Louvain,
Louvain-la-Neuve (eingeladen);
18.12.2017.
-
H. J. Böhm:
"Inhomogeneities Embedded in a Matrix Consisting of Grains Having a Length Scale Comparable to that of the Inhomogeneities - Some Simple Models";
Hauptvortrag: 24th International Workshop on Micromecahnics of Materials,
Madrid (eingeladen);
01.10.2014
- 03.10.2014.
-
H. J. Böhm:
"Introduction to Micromechanics of Composite Materials";
Vortrag: COMMAS Summer School "Computational Mechanics of Materials and Structures",
Stuttgart (eingeladen);
30.09.2002
- 11.10.2002.
-
H. J. Böhm:
"Kontinuumsmodelle zur Beschreibung des thermomechanischen Verhaltens diskontinuierlich verstärkter Materialien";
Vortrag: 14. DGM Symposium Verbundwerkstoffe und Werkstoffverbunde,
Wien (eingeladen);
02.07.2003
- 04.07.2003.
-
H. J. Böhm:
"Mathematische Modellierung des Verhaltens von Verbundwerkstoffen";
Vortrag: 2. Bayerischer Werkstoffabend,
Garching;
16.10.2008.
Zusätzliche Informationen
-
H. J. Böhm:
"Micromechanical Studies of Discontinuously Reinforced Composites";
Vortrag: 12th International Workshop on Computational Mechanics of Materials,
Darmstadt (eingeladen);
16.09.2002
- 17.09.2002.
-
H. J. Böhm:
"Modeling the Mechanical Behavior of Short Fiber Reinforced Composites";
Vortrag: CISM Course and 12th IUTAM Summer School "Mechanics of Microstructured Materials",
Udine (eingeladen);
07.07.2003
- 11.07.2003.
-
H. J. Böhm:
"Modellierung inhomogener Werkstoffe";
Vortrag: Informationsveranstaltung "Neue Werkstoffe: Entwicklung - Charakterisierung - Anwendung",
Wien (eingeladen);
22.06.2005.
-
H. J. Böhm:
"Multipartikel-Einheitszellenmodelle für diskontinuierlich verstärkte Materialien und Modellierung des Partikelbruchs in Duktilmatrix-Composites";
Vortrag: CDL-FMD Evaluierungsseminar,
Wien;
26.03.2003.
Zusätzliche Informationen
-
H. J. Böhm:
"Particle Shape Effects in Ductile Matrix Composites";
Vortrag: 25th International Workshop Research in Mechanics of Composites,
Bad Herrenalb;
06.12.2012
- 07.12.2012.
Zusätzliche Informationen
-
H. J. Böhm:
"Particle Shape Effects in Particle Reinforced Composites";
Vortrag: LM2 Seminar, Ecole Polytecnique de Montréal,
Montréal (eingeladen);
05.04.2013.
-
H. J. Böhm:
"Particle Shape Effects in Particle Reinforced Composites";
Hauptvortrag: Euromech Colloquium 577 - Micromechanics of Metal Ceramic Composites,
Stuttgart (eingeladen);
02.03.2015
- 15.03.2015.
-
H. J. Böhm:
"Remarks on Mean-Field Modeling of the Elastic Behavior of Composites Reinforced by Coated Particles";
Vortrag: 55th Annual Technical Meeting of the Society of Engineering Science,
Madrid;
10.10.2018
- 12.10.2018.
-
H. J. Böhm:
"Simple Numerical Models of Inhomogeneities in Elastic Matrices with Grain Structure";
Hauptvortrag: Advances in Micromechanics of Materials,
Rzeszow (eingeladen);
08.07.2014
- 11.07.2014.
-
H. J. Böhm:
"Some Simple Models for Studying the Influence of the Shapes of Equiaxed Particles on the Thermomechanical Response of Composites";
Vortrag: 1st International Workshop on Software Solutions for ICME,
Rolduc (eingeladen);
24.06.2014
- 27.06.2014.
-
H. J. Böhm:
"Study on Pore Shape Effects on Mechanical and Conduction Properties of Porous Materials";
Vortrag: 27th International Workshop on Computational Mechanics of Materials (IWCMM27),
Leuven;
20.09.2017
- 22.09.2017.
-
H. J. Böhm:
"Unit Cell Studies on the Thermomechanical Behavior of Discontinuously Reinforced Metal Matrix Composites";
Vortrag: IUTAM Symposium on Micromechanics of Fluid Suspensions and Solid Composites,
Austin, TX (eingeladen);
03.04.2002
- 05.04.2002.
Zusätzliche Informationen
-
H. J. Böhm, A. Bartolomé Chavert, P.H. Mayrhofer, F.D. Fischer:
"Elastic Strain Energies of Transforming Ternary Coatings";
Vortrag: 21st International Workshop on Computational Mechanics of Materials (IWCMM 21),
Limerick;
22.08.2011
- 24.08.2011.
Zusätzliche Informationen
-
H. J. Böhm, T. Drabek, D. Duschlbauer, A. Eckschlager, W. Han, C.O. Huber, H. E. Pettermann:
"Unit Cell and Mean Field Models of Continuously Reinforced Composites";
Hauptvortrag: Micromechanics and Microstructure Evolution: Modeling Simulation and Experiments,
Madrid (eingeladen);
12.09.2005
- 16.09.2005.
-
H. J. Böhm, T. Drabek, A. Eckschlager:
"Continuum Mechanical Unit Cell Models for Studying the Thermomechanical Behavior of High Speed Tool Steels";
Vortrag: 6th International Tooling Conference,
Karlstad;
10.09.2002
- 13.09.2002.
Zusätzliche Informationen
-
H. J. Böhm, F.D. Fischer:
"Analysis of Thin Coatings Containing Two Types of Transforming Inhomogeneities";
Vortrag: MFO Workshop "Mechanics of Materials" 2006,
Oberwolfach (eingeladen);
22.01.2006
- 27.01.2006.
Zusätzliche Informationen
-
H. J. Böhm, F.D. Fischer:
"On the Mechanical Driving Force on a Spheroidal Inclusion";
Vortrag: Euromech Colloquium 466 "Computational and Experimental Mechanics of Advanced Materials",
Loughborough (eingeladen);
20.07.2005
- 22.07.2005.
Zusätzliche Informationen
-
H. J. Böhm, B. Hößl, F. G. Rammerstorfer, F.G. Barth:
"Finite Element Modelling of Slit Sensilla of Arachnids";
Vortrag: NCBES Seminar,
Galway, Irland;
11.12.2006.
Zusätzliche Informationen
-
H. J. Böhm, M. Kozek:
"Überblick über Simulationsmethoden";
Vortrag: Österr. Ingenieur- und Architektenverein (ÖIAV),
Vienna;
10.04.2000.
-
H. J. Böhm, P.H. Mayrhofer, F.D. Fischer:
"Spannungs- und Dehnungsfelder durch Phasenumwandlungen in Einschlüssen in Beschichtungen";
Vortrag: Werkstoffkongress 2010,
Leoben;
04.11.2010
- 05.11.2010.
Zusätzliche Informationen
-
H. J. Böhm, S. Nogales:
"Modelling of Discontinuously Reinforced and Skeleton Heat Sinks";
Vortrag: ExtreMat SP2 Meeting,
San Sebastián;
03.05.2005.
Zusätzliche Informationen
-
H. J. Böhm, S. Nogales:
"Mori-Tanaka and Unit Cell Predictions for the Thermoelastic and Thermal Conduction Behavior of Discontinuously Reinforced Composites";
Vortrag: McMAT 2007 - ASME Applied Mechanics and Materials Conference,
Austin, TX;
03.06.2007
- 07.06.2007.
Zusätzliche Informationen
-
H. J. Böhm, S. Nogales, D. Duschlbauer, H. E. Pettermann:
"Numerically Based Modeling of Thermal Conduction in Discontinuosly Reinforced Composites";
Vortrag: 7th World Congress on Computational Mechanics (WCCM-7),
Los Angeles, CA;
16.07.2006
- 22.07.2006.
Zusätzliche Informationen
-
H. J. Böhm, S. Nogales, H. E. Pettermann:
"Comparisons of Mori-Tanaka and Unit Cell Predictions for the Thermoelastic and Thermal Conduction Behavior of Discontinuously Reinforced Composites";
Vortrag: 19th International Workshop "Research in Mechanics of Composites",
Bad Herrenalb;
26.11.2006
- 29.11.2006.
Zusätzliche Informationen
-
H. J. Böhm, S. Nogales, J.H. You:
"Continuum Modeling of the Thermophysical and Thermomechanical Behavior of Metal Matrix Composites";
Vortrag: 1st International Conference on New Materials for Extreme Environments,
San Sebastian;
02.06.2008
- 04.06.2008.
Zusätzliche Informationen
-
H. J. Böhm, S. Nogales, J.H. You:
"Modeling the Thermal Conductivity of Diamond Particle Reinforced MMCs";
Vortrag: ExtreMat SP2 Meeting,
Athen;
15.05.2006
- 18.05.2006.
Zusätzliche Informationen
-
H. J. Böhm, S. Nogales, J.H. You:
"Modeling the Thermophysical and Thermomechanical Behavior of Diamond Particle Reinfoced MMCs";
Vortrag: ExtreMat SP2 Meeting,
Thun;
07.05.2007
- 10.05.2007.
Zusätzliche Informationen
-
H. J. Böhm, D. H. Pahr:
"On Modeling the Behavior of Non-Periodic Inhomogeneous Volume Elements";
Vortrag: 21. Workshop Composite-Forschung in der Mechanik,
Bad Herrenalb (eingeladen);
01.12.2008
- 03.12.2008.
Zusätzliche Informationen
-
H. J. Böhm, D. H. Pahr, T. Daxner:
"Analytical and Numerical Methods for Modeling the Thermomechanical and Thermophysical Behavior of Microstructured Materials";
Vortrag: CISM Course "Computational and Experimental Mechanics of Advanced Materials",
Udine (eingeladen);
08.09.2008
- 12.09.2008.
-
H. J. Böhm, A. Rasool:
"Influence of Particle Shape on the Behavior of Particle Reinforced Composites";
Hauptvortrag: Influence of Particle Shape on the Behavior of Particle Reinforced Composites,
Chicago, IL (eingeladen);
30.05.2011
- 01.06.2011.
Zusätzliche Informationen
-
H. J. Böhm, A. Rasool:
"Modeling of Effects of Particle Shape on the Thermomechanical and Thermophysical Behaviors of Particle Reinforced Composites";
Vortrag: Kolloquium über Werkstoffmodellierung,
Stuttgart (eingeladen);
25.11.2010.
Zusätzliche Informationen
-
H. J. Böhm, J. Segurado, D. Duschlbauer, H. E. Pettermann, A. F. Plankensteiner:
"Modeling of the Densification of Porous Molybdenum by a Unit Cell Approach";
Vortrag: 5th Euromech Solid Mechanics Conference ESMC-5,
Thessaloniki;
17.08.2003
- 22.08.2003.
-
B. Borah, Y. Chevalier, E. Quek, G. Gross, J. Stewart, T. Lang, P.K. Zysset:
"CT-Based Finite Element Analysis Demonstrates Differential Effect of Teriparatide on Vertebral Biomechanics in Postmenopausal Women Treated Previously with Risedronate or Alendronate";
Vortrag: International Workshop of the Bone and Mineral Society 2010,
Davos;
14.03.2010
- 19.03.2010.
Zusätzliche Informationen
-
U. Burner, K. Kaudela, C. Bonfert, J.J. Schwiedrzik, E. Dall´Ara, P.K. Zysset, H. Winkler:
"Biomechanical Testing of Supercritical Corbondioxide/Gamma Sterilized Human Cancellous Bone Grafts";
Vortrag: 29th Annual Meeting of the European Bone and Joint Infection Society,
Hedelberg;
02.09.2010
- 04.09.2010.
-
P. Casagrande, A. Starlinger, H. J. Böhm:
"Zur Ermüdungsauswertung von Schienenfahrzeugkomponenten basierend auf Python-Routinen";
Vortrag: Deutschsprachige ABAQUS Benutzerkonferenz 2005,
Nürnberg;
19.09.2005
- 20.09.2005.
Zusätzliche Informationen
-
T. Ceglar, H. E. Pettermann:
"Finite element simulations and nonlinear homogenization of fibre reinforced elastomer composite";
Vortrag: 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019),
Vienna;
18.02.2019
- 22.02.2019.
Zusätzliche Informationen
-
T. Ceglar, H. E. Pettermann:
"Finite Element Simulations and Nonlinear Homogenization of Hyperelastic Fibre Reinforced Elastomer Composites";
Vortrag: 10th European Solid Mechanics Conference, Bologna,
Bologna;
02.07.2018
- 06.07.2018.
-
T. Ceglar, M. Schwab, A. Wagner, H. E. Pettermann:
"Nonlinear Multi-Scale Simulations of Fabric Laminate Components";
Vortrag: ECCOMAS Thematic Conference on Computational Modeling of Complex Materials Across the Scales,
Paris;
07.11.2017
- 09.11.2017.
-
M. Charlebois:
"An Elastic-Plastic and Damage Model for Bone Tissue";
Vortrag: Workshop on Mechanics of Heterogeneous Materials,
Prag;
19.10.2006
- 20.10.2006.
Zusätzliche Informationen
-
M. Charlebois, Y. Chevalier, P. Varga, D. H. Pahr, P.K. Zysset:
"A Combined Axial Compression and Flexion Loading Mode to Evaluate Strength of Vertebral Bodies Using a Voxel-Based Finite Element Method";
Poster: ASBMR 29th Annual Meeting,
Honolulu, HI;
16.09.2007
- 19.09.2007.
Zusätzliche Informationen
-
M. Charlebois, D. Garcia, A. Curnier, P.K. Zysset:
"An Elastic Plastic Damage Constitutive Model for Cortical Bone with Distinct Tension and Compression Damage Variables";
Vortrag: 5th World Congress of Biomechanics,
München;
29.07.2006
- 04.08.2006.
Zusätzliche Informationen
-
M. Charlebois, C. Haunschmid, P.K. Zysset:
"Confined and Unconfined Compression Tests of Human Trabecular Bone up to Very Large Strains";
Vortrag: 16th Congress of the European Society of Biomechanics,
Luzern;
06.07.2008
- 09.07.2008.
Zusätzliche Informationen
-
M. Charlebois, M. Jirásek, P.K. Zysset:
"A Nonlocal Constitutive Model for Trabecular Bone Including Softening and Densification in Compression";
Vortrag: 8th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering,
Porto;
27.02.2008
- 01.03.2008.
-
M. Charlebois, M. Jirásek, P.K. Zysset:
"A Nonlocal Constitutive Model for Trabecular Bone Including Softening and Densification in Compression";
Vortrag: 3. Wiener Biomaterialsymposium,
Wien;
19.11.2008
- 21.11.2008.
Zusätzliche Informationen
-
M. Charlebois, M. Jirásek, P.K. Zysset:
"A Nonlocal Model for Trabecular Bone Including Softening and Densification in Compression";
Poster: 9. Jahrestagung der Österreichischen Gesellschaft für Biomedizinische Technik,
Krems;
19.09.2007.
Zusätzliche Informationen
-
M. Charlebois, P.K. Zysset:
"An Elastic, Plastic and Damage Constitutive Model for Bone Tissue";
Vortrag: 77. Annual Meeting of the Gesellschaft für Angewandte Mathematik und Mechanik (GAMM),
Berlin;
27.03.2006
- 31.03.2006.
Zusätzliche Informationen
-
M. Charlebois, P.K. Zysset, M. Jirásek:
"Non-Local Constitutive Law for Softening of Trabecular Bone";
Vortrag: 18th International Conference on Computer Methods in Mechanics,
Zielona Góra;
18.05.2009
- 21.05.2009.
Zusätzliche Informationen
-
M. Charlebois, P.K. Zysset, M. Jirásek:
"Parameter Identification of a Nonlocal Hardening-Softening Elastoplastic Constitutive Law for Trabecular Bone";
Vortrag: XXII Congress of the International Society of Biomechanics,
Cape Town;
05.07.2009
- 09.07.2009.
Zusätzliche Informationen
-
Y. Chevalier, H. Allmer, D. H. Pahr, M. Charlebois, P.K. Zysset:
"Validation of a Voxel-Based FE Method for Prediction of the Uniaxial Stiffness of Human Trabecular Bone Using Macroscopic Mechanical Tests and Nanoindentation";
Vortrag: 5th World Congress of Biomechanics,
München;
29.07.2006
- 04.08.2006.
Zusätzliche Informationen
-
Y. Chevalier, M. Charlebois, P. Heini, E. Schneider, P.K. Zysset:
"Cement Distribution, Volume and Compliance in Vertebroplasty: Some Answers from an Anatomy-Based Finite Element Study";
Poster: 54th Annual Meeting of the Orthopaedic Research Society,
San Francisco, CA;
02.03.2008
- 05.03.2008.
Zusätzliche Informationen
-
Y. Chevalier, M. Charlebois, P. Heini, E. Schneider, P.K. Zysset:
"Patient-Specific Finite Element Models For Prediction of Stiffness and Strength Increase of Osteoporotic Vertebral Bodies Following Vertebroplasty";
Poster: 9. Jahrestagung der Österreichischen Gesellschaft für Biomedizinische Technik,
Krems;
19.09.2007.
Zusätzliche Informationen
-
Y. Chevalier, M. Charlebois, P. Varga, D. H. Pahr, P.K. Zysset:
"A Novel Patient Specific Finite Element Model to Predict Damage Accumulation in Vertebral Bodies under Axial Compression";
Poster: ASBMR 29th Annual Meeting,
Honolulu, HI;
16.09.2007
- 19.09.2007.
Zusätzliche Informationen
-
Y. Chevalier, D. H. Pahr, P. Heini, E. Schneider, P.K. Zysset:
"Biomechanical Analysis of Vertebroplasty Using Anatomy-Based Finite ElementModels";
Vortrag: Gemeinsame Jahrestagung der Deutschen, Österreichischen und Schweizerischen Gesellschaft für Biomedizinische Technik 2006,
Zürich;
06.09.2006
- 09.09.2006.
Zusätzliche Informationen
-
Y. Chevalier, D. H. Pahr, P.K. Zysset:
"Anatomy and Morphology-Based Smooth Finite Element Models of Human Vertebral Bodies";
Vortrag: 16th Annual Symposium on Computational Methods in Orthopaedic Biomechanics,
San Francisco, CA;
01.03.2008.
Zusätzliche Informationen
-
Y. Chevalier, D. H. Pahr, P.K. Zysset:
"Anatomy- and Morphology-Based Smooth Finite Element Models of the Vertebral Body";
Vortrag: 16th Congress of the European Society of Biomechanics,
Luzern;
06.07.2008
- 09.07.2008.
Zusätzliche Informationen
-
Y. Chevalier, D. H. Pahr, P.K. Zysset:
"Comparison of Voxel-Based and Smooth Finite Element Models to Predict Damage Accumulation in Vertebral Bodies";
Poster: 30th Annual Meeting of the American Society of Bone and Mineral Research,
Montréal;
12.09.2008
- 16.09.2008.
Zusätzliche Informationen
-
Y. Chevalier, D. H. Pahr, P.K. Zysset:
"How Cement Modulus and Distribution Change Damage Accumulation after Vertebroplasty: A Nonlinear Finite Element Study Accounting for Cortex and Trabecular Fabric";
Poster: 55th Annual Meeting of the Orthopaedic Research Society,
Las Vegas, NV;
22.02.2009
- 25.02.2009.
Zusätzliche Informationen
-
Y. Chevalier, D. H. Pahr, P.K. Zysset:
"Smoothed Voxel-Based Mesh for Patient-Specific Finite Element Models of Human Vertebral Bodies";
Vortrag: 17th Annual Symposium on Compuational Methods in Orthopaedic Biomechanics,
Las Vegas, NV;
21.02.2009.
Zusätzliche Informationen
-
Y. Chevalier, P. Varga, D. H. Pahr, E. Schneider, P.K. Zysset:
"Calibrated Finite Element Voxel Models Based on High-Resolution CT Predict in vitro Vertebral Strength Better than DEXA";
Poster: 28th Annual Meeting of the American Society of Bone and Mineral Research,
Philadelphia, PA;
15.09.2006
- 19.09.2006.
Zusätzliche Informationen
-
Y. Chevalier, P. Varga, D. H. Pahr, P.K. Zysset:
"A patient-based finite element approach to estimate vertebral bone strength";
Vortrag: International Conference on Progress in Bone and Mineral Research,
Wien;
16.11.2006
- 18.11.2006.
Zusätzliche Informationen
-
Y. Chevalier, P.K. Zysset:
"A Patient-Specific CT-Based Finite Element Methodology to Calculate the 6D Stiffness Matrix of Vertebral Bodies";
Vortrag: 34ème Congrès Annuel de la Société de Bioméanique,
Toulon;
31.08.2009
- 02.09.2009.
Zusätzliche Informationen
-
E. Cichy, W. Kaminsky, P.K. Zysset:
"Bone Collagen Fibers Orientation Assessment Using Birefringence Measurements";
Vortrag: Northwest Biomechanics Symposium 2010,
Seattle, WA;
21.05.2010
- 22.05.2010.
Zusätzliche Informationen
-
E. Cichy, P. Roschger, P.K. Zysset:
"Micromechanical and Structural Analysis of Mineralized Turkey Leg";
Poster: 3. Wiener Biomaterialsymposium,
Wien;
19.11.2008
- 21.11.2008.
Zusätzliche Informationen
-
C.J. Collins, M. Kozyrev, O.G. Andriotis, R. Byrne, H. Kiener, M. Pretterklieber, P.J. Thurner:
"Cracking Osteons From Anatomic Specimens: An image-guided assessment of failure mode";
Vortrag: 8th World Congress of Biomechanics, WCB 2018,
Dublin;
08.07.2018
- 12.07.2018.
-
C.J. Collins, U. Wolfram, P.K. Zysset, P.J. Thurner:
"Age and Porosity Significantly Effect Fracture Toughness of Cortical Bone in Transverse Crack Growth";
Poster: 23rd Congress of the European Society of Biomechanics,
Sevilla;
02.07.2017
- 05.07.2017.
-
C.J. Collins, U. Wolfram, P.K. Zysset, P.J. Thurner:
"Trabecularization at the Endosteal Surface of the Femoral Midshaft Significantly Effects Fracture Toughness of Human Cortical Bone";
Vortrag: ECCOMAS Thematic Conference on Multiscale Problems in Biomechanics and Mechanobiology (MultiBioMe 2017),
Wien;
11.09.2017
- 13.09.2017.
-
C.J. Collins, U. Wolfram, P.K. Zysset, P.J. Thurner:
"Trabecularization at the Endosteal Surface of the Femoral Midshaft Significantly Effects Fracture Toughness of Human Cortical Bone";
Poster: Orthopaedic Research Society 2018 Annual Meeting (ORS 2018),
New Orleans;
10.03.2018
- 13.03.2018.
-
L.V. Coutts, T. Jenkins, D. G. Dunlop, R.O.C. Oreffo, C. Cooper, N.C. Harvey, P.J. Thurner:
"High Resolution Analysis of Mineral Density and Geometry in Healthy and Fractured Human Femoral Neck Cortical Bone";
Poster: 21st Congress of the European Society of Biomechanics,
Prag;
05.07.2015
- 08.07.2015.
-
L.V. Coutts, T. Jenkins, R.O.C. Oreffo, D. G. Dunlop, C. Cooper, N.C. Harvey, P.J. Thurner:
"Comparison of Mechanical and Geometrical Properties with Mineral Density in Human Femoral Neck Cortical Bone";
Poster: 7th World Congress of Biomechanics (WCB2014),
Boston, MA;
06.07.2014
- 11.07.2014.
-
E. Dall´Ara:
"QCT Based Finite Element Models of the Human Vertebra and Femur: Validation with Experiments and Comparison with Bone Densitometry";
Vortrag: ISTB-Seminar,
Bern (eingeladen);
08.03.2013.
-
E. Dall´Ara, C. Karl, G. Mazza, G. Franzoso, P. Vena, M. Pretterklieber, D. H. Pahr, P.K. Zysset:
"Anisotropy of the Human Vertical Body Sub-Structures Evaluated with Micro-Indentation";
Vortrag: 19th Congresss of the European Society of Biomechanics (ESB 2013),
Patras;
25.08.2013
- 28.08.2013.
-
E. Dall´Ara, B. Luisier, M. Pretterklieber, F. Kainberger, P.K. Zysset, D. H. Pahr:
"Non-Linear QCT-Based FE Models Predict in Vitro Femoral Strength Better than DXA";
Vortrag: 2° Meeting del Capitolo Italiano della European Society of Biomechanics,
Rom;
29.06.2012.
-
E. Dall´Ara, D. H. Pahr, P. Varga, F. Kainberger, P.K. Zysset:
"Comparison between Clinical Diagnostic Tools and QCT-Based Finite Element Models for Predicting Human Vertebral Apparent Strength in Vitro";
Poster: 32nd ASMBR Annual Meeting,
Toronto;
15.10.2010
- 19.10.2010.
-
E. Dall´Ara, D. H. Pahr, P. Varga, F. Kainberger, P.K. Zysset:
"Vertebral Strength Prediction With An Increased QCT Resolution: Densitometry Versus FE";
Poster: 3rd Joint Meeting of ECTS and IBMS,
Athen;
07.05.2011
- 11.05.2011.
-
E. Dall´Ara, D. H. Pahr, P.K. Zysset:
"QCT-BMD to MicroCT-BV/TV Calibration Relationships are Similar for Human Vertebra and Femur";
Vortrag: 18th Congress of the European Society of Biomechanics (ESB2012),
Lissabon;
01.07.2012
- 04.07.2012.
-
E. Dall´Ara, R. Schmidt, D. H. Pahr, P. Varga, J. Patsch, Y. Chevalier, F. Kainberger, P.K. Zysset:
"An Improved Technique for Inducing Compression Fractures of Vertebral Bodies in Vitro";
Poster: 36th European Symposium on Calcified Tissues,
Wien;
23.05.2009
- 27.05.2009.
Zusätzliche Informationen
-
E. Dall´Ara, R. Schmidt, D. H. Pahr, P. Varga, J. Patsch, F. Kainberger, P.K. Zysset:
"An Improved Technique for Inducing Compression Fractures of Vertebral Bodies in Vitro";
Poster: Wissenschaftliche Herbsttagung 2009 der Österreichischen Gesellschaft zur Erforschung des Knochens und des Mineralstoffwechsels,
Wien;
21.11.2009.
-
E. Dall´Ara, R. Schmidt, P.K. Zysset:
"Microindentation can Discriminate between Damaged and Intact Human Bone Tissue";
Vortrag: ESB2010: 17th Congress of the European Society of Biomechanics,
Edinburgh;
05.07.2010
- 08.07.2010.
-
E. Dall´Ara, R. Schmidt, P.K. Zysset, D. H. Pahr:
"Tissue Level Mechanical Properties of Damaged and Intact Human Vertebral Bone Measured by Means of Microindentation";
Vortrag: 5. Wiener Biomaterialsymposium,
Wien;
19.11.2012
- 21.11.2012.
-
E. Dall´Ara, P. Varga, D. H. Pahr, P.K. Zysset:
"Local BMD Calibration of Human Vertebrae QCT Using Registered Micro-CT Images";
Vortrag: 37th European Symposium on Calcified Tissues,
Glasgow;
26.06.2010
- 30.06.2010.
-
E. Dall´Ara, P.K. Zysset, D. H. Pahr:
"QCT-Based Homogenized Voxel FE Models Predict Vertebral and Femoral Fracture Load Better than Areal BMD";
Vortrag: 19th Congresss of the European Society of Biomechanics (ESB 2013),
Patras;
25.08.2013
- 28.08.2013.
-
B. Daum, F. G. Rammerstorfer:
"Buckling of Lamellae in an Elastic Plastic Matrix";
Vortrag: 4th Canadian Conference on Nonlinear Solid Mechanics (CanCNSM 2013),
Montréal (eingeladen);
23.07.2013
- 26.07.2013.
-
T. Daxner:
"Leichtbau";
Vortrag: CADFEM Technologietag Leichtbau,
Wien (eingeladen);
19.09.2006.
-
T. Daxner:
"Leichtbau durch Optimierung von Material und Struktur";
Vortrag: Vortragsreihe "Konstruktiver Leichtbau", Universität Linz,
Linz (eingeladen);
26.01.2009.
-
T. Daxner:
"Modellierung und Simulation von Metallschaum auf mehreren Längenskalen";
Vortrag: Lecture Series of the Institute of Structural Mechanics, University of Stuttgart,
Stuttgart (eingeladen);
16.12.2002.
-
T. Daxner:
"Nonlinear Deformation Mechanisms in Metallic Sponges with Hollow Struts";
Vortrag: McMAT 2007 - ASME Applied Mechanics and Materials Conference,
Austin, TX;
03.06.2007
- 07.06.2007.
Zusätzliche Informationen
-
T. Daxner:
"Numerical Investigation of the Evolution of Yield Surfaces of Metallic Foams";
Vortrag: Met Foam 2003,
Berlin;
23.06.2003
- 25.06.2003.
-
T. Daxner:
"Simulating the Mechanical Behavior of Three-Dimensional Honeycombs";
Vortrag: 15th U.S. National Congress on Theoretical and Applied Mechanics,
Boulder, CO (eingeladen);
25.06.2006
- 30.06.2006.
Zusätzliche Informationen
-
T. Daxner:
"Simulation von Instabilitäten während des Kegelaufweitens von Rohren";
Vortrag: ABAQUS Austria Anwenderkonferenz,
Wien;
24.11.2003
- 25.11.2003.
Zusätzliche Informationen
-
T. Daxner, R.D. Bitsche, H. J. Böhm:
"Micromechanical Models of Metallic Sponges with Hollow Struts";
Vortrag: THERMEC 2006 - International Conference on Processing and Manufacturing of Advanced Materials,
Vancouver, BC;
04.07.2006
- 08.07.2006.
Zusätzliche Informationen
-
T. Daxner, R.D. Bitsche, H. J. Böhm:
"Raumfüllende Polyeder als mechanische Modelle für erstarrte trockene Schäume";
Vortrag: Workshop Simulation von Schaumstoffen mit stark nichtlinearem Verhalten,
Hohenwart, Deutschland;
15.09.2005
- 16.09.2005.
Zusätzliche Informationen
-
T. Daxner, R.D. Bitsche, H. J. Böhm:
"Space Filling Polyhedra as Mechanical Models for Solidified Dry Foams";
Vortrag: 4th International Conference on Porous Metals and Metal Foaming Technology,
Kyoto;
21.09.2005
- 23.09.2005.
Zusätzliche Informationen
-
T. Daxner, T. Flatscher, F. G. Rammerstorfer:
"Weight Reduction of Corrugated Board under Preservation of Buckling Strength";
Poster: 9th US National Congress on Computational Mechanics,
San Francisco, CA;
22.07.2007
- 26.07.2007.
Zusätzliche Informationen
-
T. Daxner, M.H. Luxner, F. G. Rammerstorfer:
"Pre-Tensioned Belts Overhanging Elastic Rollers";
Vortrag: 76th Annual Scientific Conference GAMM 2005,
Luxembourg;
28.03.2005
- 01.04.2005.
-
T. Daxner, F. G. Rammerstorfer:
"Leichtbau-Konstruktionsprinzipien";
Vortrag: ASMET Forum für Metallurgie und Werkstofftechnik,
Leoben (eingeladen);
14.05.2007
- 15.05.2007.
-
T. Daxner, F. G. Rammerstorfer:
"Leichtbauprinzipien - Zielgrößen, Modellbildung, Berechnungsmethoden, Optimierung";
Vortrag: ASMET Seminar Leichtbau,
Ranshofen (eingeladen);
13.04.2007
- 14.04.2007.
-
T. Daxner, F. G. Rammerstorfer, F.D. Fischer:
"Simulation of Material and Structural Instability Phenomena During the Flaring Process of Cylindrical Shells";
Vortrag: Materials Processing and Design: Modeling, Simulation and Applications NUMIFORM 2004,
Columbus, OH;
13.06.2004
- 17.06.2004.
Zusätzliche Informationen
-
T. Daxner, F. G. Rammerstorfer, F.D. Fischer:
"Simulation von Instabilitäten während des Kegelaufweitens von Rohren";
Vortrag: FE im Schnee,
Hirschegg (eingeladen);
14.01.2004
- 17.01.2004.
Zusätzliche Informationen
-
T. Daxner, R.W. Tomas:
"Mechanical Properties of Semi-Expanded Hollow Sphere Structure";
Vortrag: IUTAM Symposium on Mechanical Properties of Cellular Materials,
Paris;
17.09.2007
- 21.09.2007.
Zusätzliche Informationen
-
T. Daxner, R.W. Tomas, R.D. Bitsche:
"Mechanics of Semi-Expanded Hollow Sphere Foams";
Vortrag: MetFoam 2007,
Montreal, PQ;
05.09.2007
- 07.09.2007.
Zusätzliche Informationen
-
T. Daxner, R.W. Tomas, H. J. Böhm:
"Strength Prediction for Semi-Expanded Sintered Hollow Sphere Structures";
Vortrag: MetFoam 2009,
Bratislava;
01.09.2009
- 04.09.2009.
Zusätzliche Informationen
-
H.P. Degischer, M. Schöbel, H. J. Böhm, S. Nogales, C. Edtmaier:
"MMC-characterisation and Modelling";
Vortrag: Extremat-Meeting,
Saclay;
20.10.2008
- 22.10.2008.
-
S. Desissaire, O.G. Andriotis, P.J. Thurner:
"Nanoelasticity and Structure of Collagen Fibrils Highly Influenced by Osmotic Stress";
Vortrag: TCES 2 (Annual Meeting of the Tissue and Cell Engineering Society),
Southampton;
19.07.2015
- 21.07.2015.
-
J. Deutschmann, J. Patsch, J. Erhart, P.K. Zysset, H. Resch, F. Kainberger:
"High-Resolution pQCT and microCT of Osteoporosis and Other Bone Diseases: Ready for Clinical Use?";
Vortrag: 2010 Annual Scientific Meeting of the European Society of Musculoskeletal Radiology,
Lille;
17.06.2010
- 19.06.2010.
-
T. Drabek:
"Voruntersuchungen zur Modellierung von Matrixschädigung und -versagen in Duktilmatrix-Composites";
Vortrag: CDL-FMD Evaluierungsseminar,
Wien;
26.03.2003.
Zusätzliche Informationen
-
T. Drabek, H. J. Böhm:
"Finite Element Analysis Considering Ductile Failure in Metal Matrix Composites";
Vortrag: IWCMM 14,
Goa;
23.09.2004
- 25.09.2004.
Zusätzliche Informationen
-
T. Drabek, H. J. Böhm:
"In search of damage models for crack propagation in a ductile matrix of metal matrix composites";
Poster: IWCMM 13,
Magdeburg;
22.09.2003
- 23.09.2003.
Zusätzliche Informationen
-
T. Drabek, H. J. Böhm:
"Simulation of Ductile Damage in Metal Matrix Composites";
Vortrag: Materials Processing and Design: Modeling, Simulation and Applications NUMIFORM 2004,
Columbus, OH (eingeladen);
13.06.2004
- 17.06.2004.
Zusätzliche Informationen
-
T. Drabek, H. J. Böhm:
"Unit Cell Studies of Ductile Damage in Fiber Reinforced Metal Matrix Composites";
Vortrag: ECCOMAS 2004 (4th European Congress on Computational Methods in Applied Sciences and Engineering),
Jyväskylä (eingeladen);
24.07.2004
- 28.07.2004.
Zusätzliche Informationen
-
Ch. J. Dunmore, S. Bachmann, A. Synek, T.L. Kivell, M.M. Skinner:
"Degree of trabecular bone extension into the medullary cavity of the first metacarpal in Plio-Pleistocene hominins";
Poster: 11th Annual Meeting of the European Society for the Study of Human Evolution,
Online;
22.09.2021
- 24.09.2021.
-
Ch. J. Dunmore, T.L. Kivell, D. H. Pahr, M.M. Skinner:
"Trabecular Morphology Across the Hominoid Metacarpus Reflects Distinct Locomotor Strategies";
Vortrag: 7th Annual Meeting of the European Society for the study of Human Evolution,
Leiden;
21.09.2017
- 23.09.2017.
-
D. Duschlbauer:
"Erweitertes Mori-Tanaka Modell für nichtausgerichtete Einschlüsse";
Vortrag: CDL-FMD Evaluierungsseminar,
Wien;
26.02.2003.
-
D. Duschlbauer, H. J. Böhm, H. E. Pettermann:
"Die Berechnung von Faserspannungen in Composites mit nicht ausgerichteten Fasern basierend auf der Mori-Tanaka Methode";
Vortrag: Workshop AG Composite 2002,
Berlin;
18.11.2002
- 20.11.2002.
-
D. Duschlbauer, H. E. Pettermann:
"Numerical Simulation of Composite Materials by Multi-Fiber Unit Cells";
Vortrag: 21st CAD-FEM User's Meeting,
Potsdam;
12.11.2003
- 14.11.2003.
-
D. Duschlbauer, H. E. Pettermann, H. J. Böhm:
"Heat Conduction of Spheroidal Inhomogeneities with Imperfect Interfaces";
Vortrag: 2003 ASME Mechanics and Materials Conference,
Scottsdale, AZ;
17.06.2003
- 20.06.2003.
-
D. Duschlbauer, H. E. Pettermann, H. J. Böhm:
"Rechnerische Simulation der Wärmeleitungseigenschaften von MMCs mit spezieller Berücksichtigung eines thermischen Widerstandes am Interface";
Vortrag: 14. DGM Symposium Verbundwerkstoffe und Werkstoffverbunde,
Wien;
02.07.2003
- 04.07.2003.
-
C. Eisenmenger-Sittner, H. J. Böhm:
"Contributions to Process Development, Modelling and Testing of ExtreMaterials";
Vortrag: 2nd KMM-NoE Integration Conference,
Wien;
24.10.2007
- 25.10.2007.
Zusätzliche Informationen
-
S. Elgeti, F. Key, F. Zwicke:
"Deformation Of Computational Domains In Primary Manufacturing Methods";
Vortrag: 14th World Congress on Computational Mechanics (WCCM 2020, Paris),
Paris;
11.01.2021
- 15.01.2021.
-
S. Elgeti, M. von Danwitz, N. Hosters, V. Karyofylli, F. Zwicke:
"Inverse Design in Injection Molding";
Vortrag: CU-Thementag "Thermoplastische Composites - Ein Trend mit Tragweite?",
Schwertberg;
06.02.2020.
-
S.-J. Estermann, S. Förster-Streffleur, L. Hirtler, J Streicher, D. H. Pahr, A.G. Reisinger:
"Viscoelastic properties of human liver: influence of Thiel preservation and comparison with animal tissue";
Vortrag: 26th Congress of the European Society of Biomechanics - ESBiomech,
Mailand;
11.07.2021
- 14.07.2021.
-
S.-J. Estermann, C. Müller-Guttenbrunn, D. Pahr, A.G. Reisinger:
"Comparison of tactile properties of liver tissue and potential 3D printing materials via macroindentation";
Vortrag: 11. Kongress der Deutschen Gesellschaft für Biomechanik (DGfB 2019),
Berlin;
03.04.2019
- 05.04.2019.
-
P. Farahmand, F. Marin, F. Hawkins, R. Möricke, J.D. Ringe, C.C. Glüer, N. Papaioannu, S. Minisola, G. Martínez, J.M. Nolla, C. Niedhart, N. Guañabens, R. Nuti, E. Martín-Mola, F. Thomasius, G. Kapetanos, J. Peña, C. Graeff, H. Petto, A. Gentzel, A.G. Reisinger, P.K. Zysset:
"Changes in Serum PINP during Teriparatide Therapy Correlate with Improvements in Vertebral Strength as Assessed by Finite Element Modeling in Men with Glucocorticoid-Induced Osteoporosis";
Vortrag: ECTS2012,
Stockholm;
19.05.2012
- 23.05.2012.
-
G. Figala, B. Buchmayr, C. Bilik, F. G. Rammerstorfer:
"Verbesserung der statischen und dynamischen Eigenschaften von Platten durch lokale Laserbestrahlung";
Vortrag: Schmiedewerkzeuge: Technologien - Entwicklungen - Analysen,
Salzburg;
24.10.2011
- 25.10.2011.
Zusätzliche Informationen
-
F.D. Fischer, F. G. Rammerstorfer, T. Daxner:
"An Analytical Approach to Flaring";
Vortrag: XXIV. Verformungskundliches Kolloquium,
Planneralm (eingeladen);
26.02.2005
- 05.03.2005.
Zusätzliche Informationen
-
J.T. Fischer, M. Frank, P.J. Thurner:
"Quantification of microdamage formation during fatigue testing of individual trabeculae";
Vortrag: 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019),
Vienna;
18.02.2019
- 22.02.2019.
Zusätzliche Informationen
-
T. Flatscher:
"Nichtlineares Schichtverhalten unter Berücksichtigung von Schädigung und Plastizität";
Vortrag: AAR-PCCL Seminar "Werkstoffmechanik laminierter Composites: Experiments und Simulation",
Wien;
15.01.2008.
Zusätzliche Informationen
-
T. Flatscher, T. Daxner, F. G. Rammerstorfer:
"Optimization of Corrugated Paper under Local and Global Buckling Constraints";
Vortrag: Colloquium on Multiscale Methods in Computational Mechanics (MMCM 2009),
Rolduc (eingeladen);
11.03.2009
- 13.03.2009.
Zusätzliche Informationen
-
T. Flatscher, J. Gager, H. E. Pettermann:
"Constitutive Ply Modeling of Plasticity, Brittle Damage, and Softening Applied to Failure Analyses of Laminated Composite Structures";
Hauptvortrag: CFRAC 2011 - International Conference on Computational Modeling of Fracture and Failure of Materials and Structures,
Barcelona;
06.06.2011
- 08.06.2011.
Zusätzliche Informationen
-
T. Flatscher, H. E. Pettermann:
"A Constitutive Ply Model for Non-Linear Implicit FEM Analyses of Laminated Composite Structures";
Vortrag: Sixth M.I.T. Conference on Computational Fluid and Solid Mechanics,
Cambridge, MA;
15.06.2011
- 17.06.2011.
Zusätzliche Informationen
-
T. Flatscher, H. E. Pettermann:
"Plasticity, Damage, and Failure Predictions in Laminated Composites";
Vortrag: 15th International Conference on Composite Structures (ICCCS15),
Porto;
15.06.2009
- 17.06.2009.
Zusätzliche Informationen
-
T. Flatscher, C. Schuecker, H. E. Pettermann:
"A Constitutive Model for Continuous Fiber Reinforced Polymer Plies";
Vortrag: 80th Annual Meeting of the GAMM,
Gdansk;
09.02.2009
- 13.02.2009.
Zusätzliche Informationen
-
T. Flatscher, C. Schuecker, H. E. Pettermann:
"An Elasto-Plasto-Damage Constitutive Ply Model for FEM-Analyses of Laminated Composite Structures";
Vortrag: 8th World Congress on Computational Mechanics (WCCM8) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008),
Lido di Venezia;
30.06.2008
- 04.07.2008.
Zusätzliche Informationen
-
T. Flatscher, M. Wolfahrt, G. Pinter, H. E. Pettermann:
"Simulations and Experiments of Laminated Open Hole Tension Tests - Assessment of Intraply Plasticity, Damage, and Localization";
Vortrag: Dfc-11 & Si-5,
Cambridge, UK;
12.04.2011
- 15.04.2011.
Zusätzliche Informationen
-
M. Frank, O. J. Aryeetey, D. H. Pahr:
"Usage of the Abaqus ‐ adaptive quasi‐ linear viscoelastic model for arbitrary load prediction";
Poster: 26th Congress of the European Society of Biomechanics - ESBiomech,
Mailand;
11.07.2021
- 14.07.2021.
-
M. Frank, D. Marx, D. H. Pahr, P.J. Thurner:
"Measurement of the Mechanical Tissue Parameters of Individual Trabeculae in a Physiologic Environment";
Vortrag: 22nd Congress of the European Society of Biomechanics (ESB 2016),
Lyon;
10.07.2016
- 13.07.2016.
-
M. Frank, D. Marx, D. H. Pahr, P.J. Thurner:
"Tissue Mechanical Properties of Bovine Trabeculae in Tension ar Different in a Dry or Wet Environment";
Vortrag: 23rd Congress of the European Society of Biomechanics,
Sevilla;
02.07.2017
- 05.07.2017.
-
J. Gager, J. Cichosz, M. Wolfahrt, R.T. Hinterhölzl, H. E. Pettermann, M. Fleischmann, M. Schubert:
"Materialmodellierung von kohlenstofffaserverstärkten Geflechtlaminaten";
Vortrag: PCCL Symposium Oktober 2012 "10 Jahre PCCL",
Leoben;
04.10.2012
- 05.10.2012.
-
J. Gager, J. Cichosz, M. Wolfahrt, H. E. Pettermann, R.T. Hinterhölzl, G. Pinter, J. Noisternig:
"Werkstoffcharakterisierung, Materialmodellierung und Simulation am Beispiel von kohlenstofffaserverstärkten Geflechtlaminaten";
Vortrag: PCCL Symposium Mai 2012,
Leoben;
19.05.2012
- 20.05.2012.
-
J. Gager, H. E. Pettermann:
"FEM Homogenization of Textile Composites Based on Shell Element Discretization";
Vortrag: ICCS16, 16th International Conference on Composite Structures,
Porto;
28.06.2011
- 30.06.2011.
Zusätzliche Informationen
-
J. Gager, H. E. Pettermann:
"Numerical Simulation of Damage Triggered Delamination in Composite Structures";
Poster: Aerodays 2011,
Madrid;
30.03.2011
- 01.04.2011.
Zusätzliche Informationen
-
J. Gager, H. E. Pettermann:
"Shell Element Based Homogenization of Textile Composites";
Vortrag: 8th European Solid Mechanics Conference (ESMC 2012),
Graz;
09.07.2012
- 13.07.2012.
-
J. Gager, H. E. Pettermann:
"The Mechanical Performance of Laminated Structures - A Simulation Concept Integrating Ply and Interface";
Vortrag: FACC Technical Colloquium "Advances in Composites",
Salzburg;
05.06.2012
- 06.06.2012.
-
D. Garcia, A. Curnier, P.K. Zysset:
"A rate-dependent constitutive law for damage of cortical and trabecular bone tissue";
Poster: 14th Conference of the European Society of Biomechanics,
s'Hertogenbosch;
04.07.2004
- 07.07.2004.
Zusätzliche Informationen
-
I. Gebeshuber, J. Rosser, F. Rudroff, P.J. Thurner:
"Podiumsdiskussion Inspired by Nature";
Vortrag: Mercur Preisverleihung,
TU Wien;
13.11.2018.
-
A. Gerisch, S. Tiburtius, Q. Grimal, F. Molnar, E. Spiesz, M. Langner, P.K. Zysset, F. Peyrin, K. Raum:
"A Micromechanical Model of the Mineralized Collagen Fibril Bundle with Application to Mineralized Turkey Leg Tendon Data";
Vortrag: 7th International Congress on Industrial and Applied Mathematics (IACM 2011),
Vancouver, BC;
18.07.2011
- 22.07.2011.
Zusätzliche Informationen
-
C.C. Glüer, C. Graeff, T.N. Nickelsen, P.K. Zysset:
"QCT and High Resolution CT are Better Surrogate Measures of Bone Strength than DXA for Patients on Teriparatide Treatment: Results form the Eurofors Study";
Vortrag: ASBMR 29th Annual Meeting,
Honolulu, HI;
16.09.2007
- 19.09.2007.
Zusätzliche Informationen
-
C.C. Glüer, F. Marin, J.D. Ringe, F. Hawkins, R. Möricke, N. Papaioannu, P. Farahmand, S. Minisola, G. Martínez, J.M. Nolla, C. Niedhart, N. Guañabens, R. Nuti, E. Martín-Mola, F. Thomasius, G. Kapetanos, J. Peña, C. Graeff, H. Petto, B. Sanz, A.G. Reisinger, P.K. Zysset:
"Teriparatide and Risedronate in Glucocorticoid-Induced Osteoporosis in Men: 18-Month Results of the EuroGIOPS Trial";
Vortrag: ECTS2012,
Stockholm;
19.05.2012
- 23.05.2012.
-
C. Graeff, Y. Chevalier, M. Charlebois, P. Varga, D. H. Pahr, T.N. Nickelsen, C.C. Glüer, P.K. Zysset:
"Teriparatide Reduces the Size of Regions at High Risk of Failure as Assessed by Non-Linear FE Analysis In Vivo";
Vortrag: 18th International Bone Densitometry Workshop,
Pugnochiuso;
15.06.2008
- 19.06.2008.
-
C. Graeff, C.C. Glüer, J. Borggrefe, M. Charlebois, Y. Chevalier, P. Varga, D. H. Pahr, T.N. Nickelsen, F. Marin, J. Farrerons, P.K. Zysset:
"Effects of 2 Years Teriparatide Treatment on Bone Strength Assessed by High Resolution CT Based Finite Element Analysis of Human Vertebrae in vivo: Results form the Eurofors Study";
Poster: ASBMR 29th Annual Meeting,
Honolulu, HI;
16.09.2007
- 19.09.2007.
Zusätzliche Informationen
-
C. Graeff, C.C. Glüer, Y. Chevalier, P. Varga, D. H. Pahr, T.N. Nickelsen, F. Marin, P.K. Zysset:
"Increases in Stiffness After Two Years of Teriparatide Treatment Assessed by High Resolution CT Based Finite Element Analysis of Human Vertebrae in Vivo";
Poster: 28th Annual Meeting of the American Society of Bone and Mineral Research,
Philadelphia, PA;
15.09.2006
- 19.09.2006.
Zusätzliche Informationen
-
C. Graeff, P.K. Zysset, F. Marin, C.C. Glüer:
"Bone Apposition in Patients on Teriparatide Treatment is Preferably Directed to Skeletal Regions of Local Structural Weakness: Assessment by High Resolution CT Based Finite Element Analysis in vivo";
Vortrag: ASBMR 29th Annual Meeting,
Honolulu, HI;
16.09.2007
- 19.09.2007.
Zusätzliche Informationen
-
C. Grohs, M. Seitzberger, S. Kaltmann, H. J. Böhm:
"FEM-Aided Evaluation of Parameters for Ductile Damage Modeling";
Vortrag: 6th International Conference on Fracture and Damage Mechanics,
Funchal, Madeira;
17.07.2007
- 19.07.2007.
Zusätzliche Informationen
-
T. Gross:
"Micro CT-Analysen und Nanoindentation";
Vortrag: 20. Osteoporoseforum der ÖGKM,
St. Wolfgang (eingeladen);
10.05.2012
- 12.05.2012.
-
T. Gross, M. Bina, J.J. Schwiedrzik, P.K. Zysset, D. H. Pahr:
"Non-Linear Micro FE Simulations Based on the ParFEAP Framework";
Vortrag: 12th International Symposium on Comupter Methods in Biomechanics and Biomedical Engineering, CMBBE 2014,
Amsterdam (eingeladen);
13.10.2014
- 14.10.2014.
-
T. Gross, D. H. Pahr:
"CT Based microFE Analysis of Orthopaedic Screw Stability: Real vs. Virtual Implantation";
Vortrag: Scanco Medical User Meeting 2013,
Appenzell;
24.10.2013
- 26.10.2013.
-
T. Gross, D. H. Pahr, R. Müller, M. Rubin, J. Bilezikian, P.K. Zysset:
"Morphology-Elasticity Relationships in Iliac Crest Biopsies are not Affected by Hyperparathyroidism";
Vortrag: 18th Congress of the European Society of Biomechanics (ESB2012),
Lissabon;
01.07.2012
- 04.07.2012.
-
T. Gross, D. H. Pahr, F. Peyrin, P.K. Zysset:
"Mineral Heterogeneity has a Minor Influence on the Apparent Elastic Properties of Human Cancellous Bone";
Poster: Wissenschaftliche Herbsttagung der ÖGKM 2010,
Wien;
26.10.2010
- 27.10.2010.
-
T. Gross, D. H. Pahr, F. Peyrin, P.K. Zysset:
"The Influence of Mineral Heterogeneity on the Apparent Elastic Properties of Human Cancellous Bone: A SRµCT Based Finite Element Study";
Poster: 2011 ORS Annual Meeting,
Long Beach, CA;
13.01.2011
- 16.01.2011.
-
T. Gross, D. H. Pahr, P.K. Zysset:
"Morphology-Elasticity Relationships of Human Trabecular Bone in Three Major Anatomical Locations";
Poster: 2012 ORS Annual Meeting,
San Francisco, CA;
03.02.2012
- 06.02.2012.
-
G. Haïat, F. Padilla, M. Svrcekova, Y. Chevalier, D. H. Pahr, P. Laugier, P.K. Zysset:
"Relation between the Apparent Modulus of Human Trabecular Bone Assessed by Micro Finite Element Analysis and the Ultrasonic Parameter";
Vortrag: 2009 International Congress on Ultrasonics,
Santiago de Chile;
11.01.2009
- 17.01.2009.
-
G. Haïat, F. Padilla, M. Svrcekova, Y. Chevalier, D. H. Pahr, P. Laugier, P.K. Zysset:
"Relation Between the Ultrasonic Parameters and Strength of Human Cancellous Bone: A Numerical Study";
Vortrag: 18th International Bone Densitometry Workshop,
Pugnochiuso;
15.06.2008
- 19.06.2008.
-
M. Handelshauser, O.G. Andriotis, S. Desissaire, M. Marchetti-Deschmann, P.J. Thurner:
"Analysis of Mechanical Properties of Partially Dehydrated Collagen Fibrils through a Novel Nonlinear Rheological Model for Tensile Tests";
Vortrag: ASAC JunganalytikerInnen Forum,
Linz;
23.09.2019
- 24.09.2019.
-
M. Handelshauser, O.G. Andriotis, M. Marchetti-Deschmann, P.J. Thurner:
"Measuring Viscoelasticity in Tensile Loaded Collagen Fibrils Through a Nonlinear Rheological Model";
Vortrag: 26th Congress of the European Society of Biomechanics - ESBiomech,
Mailand;
11.07.2021
- 14.07.2021.
-
M. Handelshauser, O.G. Andriotis, M. Marchetti-Deschmann, P.J. Thurner:
"Viscoelastic Behavior of Collagen Fibrils Investigated by a Nonlinear Rheological Model";
Vortrag: 2021 NanoScientific Forum Europe (NSFE2021),
Freiburg;
15.09.2021
- 17.09.2021.
-
M. Handelshauser, M. Marchetti-Deschmann, P.J. Thurner, O.G. Andriotis:
"Assessment of mechanical parameters in collagen fibrils through a nonlinear rheological model";
Vortrag: Scientific Meeting of the Austrian Chapter of ESB,
online / Zoom;
30.11.2020.
-
M. Handelshauser, P.J. Thurner, M. Marchetti-Deschmann:
"Evaluation of Spraying and Sublimation Devices for Matrix Application in MALDI Imaging";
Poster: OurCon 2021 - The international MS Imaging Conference,
Sheffield, UK;
12.10.2021
- 13.10.2021.
-
M.A. Hartmann, D. Holec, M. Todt, F.D. Fischer, F. G. Rammerstorfer, P.H. Mayrhofer, O. Paris:
"A Multi-Scale Approach for Studying Carbon Nanostructures";
Vortrag: Joint Annual Meeting of the Swiss Physical Society and the Austrian Physical Society 2011,
Lausanne;
15.06.2011
- 17.06.2011.
-
M.A. Hartmann, M. Todt, D. Holec:
"Studying the Mechanical Properties of Carbon Nanostructures via Computer Simulations";
Vortrag: 84th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM),
Novi Sad;
18.03.2013
- 22.03.2013.
-
M.A. Hartmann, M. Todt, D. Holec, P.H. Mayrhofer, O. Paris, F.D. Fischer, F. G. Rammerstorfer:
"Mechanical Properties of Carbon Nanostructures Investigated by Monte Carlo Simulations";
Vortrag: 62. Jahrestagung der Österreichischen Physikalischen Gesellschaft,
Graz;
18.09.2012
- 21.09.2012.
-
M.A. Hartmann, M. Todt, D. Holec, P.H. Mayrhofer, O. Paris, F.D. Fischer, F. G. Rammerstorfer:
"Mechanical Stability Behavior of Fullerenes";
Vortrag: 76. Jahrestagung der DPG und DPG-Frühjahrstagung,
Berlin;
25.03.2012
- 30.03.2012.
-
M.A. Hartmann, M. Todt, F. G. Rammerstorfer:
"Effective Mechanical Properties of Graphene Obtained by Computational Mechanical Tests";
Vortrag: Verhandlungen der Deutschen Physikalischen Gesellschaft,
Berlin;
15.03.2015
- 20.03.2015.
-
M.A. Hartmann, M. Todt, F. G. Rammerstorfer, D. Holec, P.H. Mayrhofer, F.D. Fischer, O. Paris:
"Simulation-Based Design of Nanocomposite Metamaterials";
Vortrag: 10th World Congress on Computational Mechanics (WCCM 2012),
São Paulo;
08.07.2012
- 13.07.2012.
-
B. Hößl:
"Spaltsinnesorgane als Modell für einen neuartigen Kraft-Sensor: Probleme und Pläne";
Vortrag: Seminar des Intituts für Zoologie, Universität Wien,
Wien;
22.01.2004.
Zusätzliche Informationen
-
B. Hößl:
"Technisches zu lyraförmigen Organen";
Vortrag: Workshop Neurobiologie Wien - Bonn,
Wien;
06.07.2006
- 07.07.2006.
Zusätzliche Informationen
-
B. Hößl, H. J. Böhm, F. G. Rammerstorfer, F.G. Barth:
"Arthropod Strain Detectors: I. Modeling the Mechanics of Arachnid Lyriform Organs by Finite Element Models";
Poster: Fifth Forum of European Neuroscience,
Wien;
08.07.2006
- 12.07.2006.
Zusätzliche Informationen
-
B. Hößl, H. J. Böhm, F. G. Rammerstorfer, R. Müllan, F.G. Barth:
"Engineering Meets Biology: Computer Based Modeling of Spider Strain Detectors";
Vortrag: 9th Meeting of the Austrian Neuroscience Association,
Obergurgl;
21.06.2005
- 26.06.2005.
Zusätzliche Informationen
-
P. Hoffmann, M. Springer, M. Todt, B. Karunamurthy, M. Nelhiebel, H. E. Pettermann:
"Simulation of fatigue damage in power semiconductors subjected to transient thermo-mechanical loading";
Vortrag: 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019),
Vienna;
18.02.2019
- 22.02.2019.
Zusätzliche Informationen
-
D. Holec, M.A. Hartmann, F. G. Rammerstorfer, O. Paris, F.D. Fischer, P.H. Mayrhofer:
"Surface Energy of Carbon Fullerenes and Nanotubes";
Vortrag: 37th International Conference on Metallurgical Coatings and Thin Films,
San Diego, CA;
26.04.2010
- 30.04.2010.
Zusätzliche Informationen
-
M. Horak, M. Charlebois, M. Jirásek:
"Regularized Damage-Plastic Model for Trabecular Bone";
Vortrag: ECCM2010, European Conference on Computational Mechanics 2010,
Paris;
21.05.2010
- 26.05.2010.
-
H.S. Hosseini, P.K. Zysset:
"Modeling and Experimental Validation of Trabecular Bone Damage in Large Strain Compression";
Vortrag: GAMM - 82nd Annual Meeting,
Graz;
18.04.2011
- 21.04.2011.
-
C.O. Huber, S. Kremmer, A. Merstallinger, H. E. Pettermann:
"Numerical Simulation of Composites - Thermoelastic Friction Analysis and Its Limitation Due to Thermoelastic Instability";
Vortrag: 6th European Solid Mechanics Conference,
Budapest;
28.08.2006
- 01.09.2006.
Zusätzliche Informationen
-
G. Iori, A.G. Reisinger, Peralta Peralta, K. Raum, D. H. Pahr:
"Stiffness Coefficients of Compressive and Bending Nature During Quasi-Static Mechanical Tests of the Hip";
Vortrag: 23rd Congress of the European Society of Biomechanics,
Sevilla;
02.07.2017
- 05.07.2017.
-
T. Jenkins, O.G. Andriotis, O.L. Katsamenis, L.V. Coutts, D. G. Dunlop, R.O.C. Oreffo, C. Cooper, N.C. Harvey, P.J. Thurner:
"Material and Structural Properties Influence Reference Point Microindentation";
Poster: 21st Congress of the European Society of Biomechanics,
Prag;
05.07.2015
- 08.07.2015.
-
T. Jenkins, L.V. Coutts, D. G. Dunlop, R.O.C. Oreffo, C. Cooper, N.C. Harvey, P.J. Thurner:
"Reference Point Microindentation Supplements Clinical Measures to Discriminate Osteoporotic From Non-Fractured Bone";
Vortrag: 21st Congress of the European Society of Biomechanics,
Prag;
05.07.2015
- 08.07.2015.
-
T. Jenkins, L.V. Coutts, S. D´Angelo, D. G. Dunlop, R.O.C. Oreffo, C. Cooper, N.C. Harvey, P.J. Thurner:
"Reference Point Microindentation Supplements Existing Clinical Factors for Improved Fracture Risk Assessment at the Femoral Neck";
Vortrag: ASMBR 37th Annual Meeting,
Seattle, WA;
09.10.2015
- 12.10.2015.
-
T. Jenkins, L.V. Coutts, O.L. Katsamenis, S. D´Angelo, D. G. Dunlop, R.O.C. Oreffo, C. Cooper, N.C. Harvey, P.J. Thurner:
"Reference Point micro-Indentation (RPI) Assesses Bone Quality to Supplement Bone Mineral Density (BMD) and Clinical Factors (FRAX®) for Improved Fracture Risk Assessment at the Human Femoral Neck";
Vortrag: BRS Annual Meeting 2015,
Edinburgh;
01.09.2015
- 03.09.2015.
-
O.L. Katsamenis, L.D. Silverman, N. Bouropoulos, E.S. Sørensen, J.D. Kilburn, P.J. Thurner:
"Mechanical Interaction between Osteopontin and Hydroxyapatite";
Vortrag: 7th World Congress of Biomechanics (WCB2014),
Boston, MA;
06.07.2014
- 11.07.2014.
-
K. Kaudela, U. Burner, J.J. Schwiedrzik, E. Dall´Ara, P.K. Zysset, H. Winkler:
"Biomechanical Testing of Supercritical Carbondioxyde Treated / Gamma Sterilized Human Cancellous Bone Grafts";
Vortrag: 19th International Congress of the European Association of Tissue Banks,
Berlin;
03.11.2010
- 05.11.2010.
-
K. Kaudela, U. Burner, J.J. Schwiedrzik, E. Dall´Ara, P.K. Zysset, H. Winkler:
"Biomechanical Testing of Supercritical Corbondioxide/Gamma Serilized Human Cancellous Bone Grafts";
Vortrag: 8th Central European Orthopedic Congress,
Pécs;
16.06.2010
- 17.06.2010.
-
J. Kaul, B. Dohnál, H. E. Pettermann:
"A Constitutive Law for Modeling Elasto-Plasto-Damage Mechanisms in UD-Plies: Damage Evolution under Multiaxial Strain States";
Vortrag: CFRAC 2017 - Fifth International Conference on Computational Modeling of Fracture and Failure of Materials and Structures,
Nantes;
14.06.2017
- 16.06.2017.
-
J. Kaul, H. E. Pettermann:
"A constitutive model for fiber reinforced polymer plies - transition from hardening to softening behavior during anisotropic damage evolution";
Vortrag: 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019),
Vienna;
18.02.2019
- 22.02.2019.
Zusätzliche Informationen
-
J. Kaul, H. E. Pettermann:
"Modellierung und Simulation von Plastizität und Schädigung in Faserverbundlaminaten";
Poster: CU-Forum "CARBON COMPOSITES AUSTRIA" 2019,
Spielberg;
12.11.2019.
-
F. Key:
"Model Order Reduction in Production Engineering";
Poster: 91st Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2021),
Kassel;
15.03.2021
- 19.03.2021.
-
F. Key, D. Hilger, S. Elgeti:
"Application of Model Order Reduction in the Field of Polymer Processing";
Poster: Mechanistic Machine Learning and Digital Twins for Computational Science, Engineering & Technology (MMLDT-CSET 2021),
San Diego;
26.09.2021
- 29.09.2021.
-
F. Key, M. von Danwitz, F. Ballarin, S. Elgeti, M. Behr, G. Rozza:
"Time-Continuous Simplex Space-Time Finite Element Method and Model Order Reduction for Deforming Domain Problems";
Vortrag: 91st Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2021),
Kassel;
15.03.2021
- 19.03.2021.
-
M. Kinzl, A. Boger, L. Benneker, D. H. Pahr:
"Patientenspezifische homogenisierte kontinuumsmechanische und mikromechanische Finite Elemente Methoden zur Prädiktion der Steifigkeit und Festigkeit von mit PMMA Knochenzement augmentierten Wirbelkörpern";
Vortrag: 4. Wiener Biomaterialsymposium,
Wien;
15.11.2010
- 17.11.2010.
-
M. Kinzl, A. Boger, P.K. Zysset, D. H. Pahr:
"Influences of Pore and Bone Volume Fraction on the Mechanical Properties of Standard and Low-Modulus PMMA/Bone Biopsies Extracted from Augmented Vertebral Bodies";
Vortrag: GRIBOI 2011 - The 21st Interdisciplinary Research Conference on Injectable Osteoarticular Biomaterials and Bone Augmentation,
Boston, MA;
05.04.2011
- 07.04.2011.
Zusätzliche Informationen
-
M. Kinzl, T. Daxner:
"Continuum Mechanical Model of Muscle Tissue";
Vortrag: 2009 Simulia Austria Regional Users' Conference,
Graz;
09.11.2009
- 10.11.2009.
Zusätzliche Informationen
-
M. Kinzl, D. H. Pahr:
"The Effect of Cement Material Properties and Filling Patterns on the Stiffness, Strength and Endplate Load Transfer in Vertebroplasty";
Poster: Wissenschaftliche Herbsttagung der ÖGKM 2010,
Wien;
26.10.2010
- 27.10.2010.
-
M. Kinzl, D. H. Pahr:
"The Effect of Cement Material Properties and Filling Patterns on the Stiffness, Strength and Endplate Load Transfer in Vertebroplasty.";
Poster: EuroSpine 2010,
Wien;
15.10.2009
- 17.10.2009.
-
M. Kinzl, U. Wolfram, D. H. Pahr:
"Identification of a Crushable Foam Material Model and Application to Strength and Damage Prediction of Human Femur and Vertebral Body";
Vortrag: 8. Jahrestagung der Deutschen Gesellschaft für Biomechanik,
Neu-Ulm;
15.05.2013
- 17.05.2013.
-
T.L. Kivell, Ch. J. Dunmore, S.C. Lu, A. Synek, A. Bardo, E. Bird, K. Deckers, A. Key, D. H. Pahr, M.M. Skinner:
"Signals of Locomotion and Manipulation in the Internal Trabecular Bone Structure of Extant Hominoids and Fossil Hominins";
Vortrag: International Congress of Vertebrate Morphology (ICVM),
Prague;
21.07.2019
- 25.07.2019.
-
T.L. Kivell, H.N. Nguyen, Z.J. Tsegai, T. Gross, J. Hublin, D. H. Pahr, M.M. Skinner:
"Fossils, Trabeculae and Finite Element Modelling: A Holistic Approach to Reconstructing Behavior in the Past";
Poster: 83rd Annual Meeting of the American Association of Physical Anthropologists,
Calgary, AB;
08.04.2014
- 12.04.2014.
-
D. Klüß, E. Soodmand, A. Lorenz, D. Pahr, M. Schwarze, R. Cichon, P. Varady, S. Herrmann, B. Buchmeier, C. Schröder, S. Lehner, M. Kebbach:
"Ein Finite-Elemente-Ringversuch zur Biomechanik des humanen Femur zwischen sieben teilnehmenden Laboren mit experimenteller Validierung";
Vortrag: 11. Kongress der Deutschen Gesellschaft für Biomechanik (DGfB 2019),
Berlin;
03.04.2019
- 05.04.2019.
-
G. Kravchenko, H. E. Pettermann:
"Submodelling-based analysis of thermally induced stresses in power metallization of a MOSFET device subjected to active cycling";
Vortrag: 1st Infineon Simulation Symposium - Advances in Thermomechanical and Thermoelectrical Simulation,
Neubiberg;
24.10.2012.
-
G. Kravchenko, H. E. Pettermann, B. Karunamurthy, M. Nelhiebel, S. Wöhlert:
"Numerical Simulation of Crack Problems in Semiconductor Devices";
Poster: Infineon Innovation Day 2012,
Villach;
05.07.2012.
-
A. Kuhn, H. J. Böhm, A. Szadeczky, A. Rauh:
"CoMModO: Comples Material Modeling Operations";
Vortrag: SIMULIA Austria Regional User's Conference 2010,
Wien;
08.11.2010
- 09.11.2010.
Zusätzliche Informationen
-
A. Kuhn, T. Palau, H. J. Böhm, S. Nogales, V. Oancea, R. Roy, J. Lescheticky, A. Rauh:
"CoMModO - Complex Material Modelling Operations";
Vortrag: SIMULIA Austria Regional Users Meeting 2011,
Salzburg;
15.11.2011.
Zusätzliche Informationen
-
D. Larsson, B. Luisier, M.E. Kersh, E. Dall´Ara, P.K. Zysset, MG Pandy, D. H. Pahr:
"Estimation of Femoral Trabecuar Bone Fabric from QCT Images Depends on the Size of the Region of Interest";
Vortrag: 19th Congresss of the European Society of Biomechanics (ESB 2013),
Patras;
25.08.2013
- 28.08.2013.
-
T. Li, T. Jenkins, S.A. Lanham, D. Sreenivasan, J. Fernandez, P.J. Thurner, R.O.C. Oreffo:
"In utero Vitamin D Depletion Reduces Femoral Bone Area and Strength of Offspring at 21 Days of Age";
Vortrag: TCES 2 (Annual Meeting of the Tissue and Cell Engineering Society),
Southampton;
19.07.2015
- 21.07.2015.
-
T. Li, T. Jenkins, S.A. Lanham, D. Sreenivasan, J. Fernandez, P.J. Thurner, R.O.C. Oreffo:
"Multiscale and Multidisciplinary Analysis of Murine Bone Health Following In Utero Vitamin D Deficiency";
Vortrag: 4th TERMIS World Congress,
Boston, MA;
08.09.2015
- 11.09.2015.
-
A. Lorenz, C. Freidhager, U.G. Leichtle, D. Pahr:
"Krümmungsbasierte Detektion anatomischer Landmarken und Achsen am menschlichen Kniegelenk";
Vortrag: 11. Kongress der Deutschen Gesellschaft für Biomechanik (DGfB 2019),
Berlin;
03.04.2019
- 05.04.2019.
-
S.C. Lu, E. Vereeke, A. Synek, D. H. Pahr, T.L. Kivell:
"Reconstructing Hand Use in Fossil Hominins: Validating Musculoskeletal and Finite Element Models of the Third Digit for Precision Grasping and Locomotion";
Poster: 7th Annual Meeting of the European Society for the study of Human Evolution,
Leiden;
21.09.2017
- 23.09.2017.
-
B. Luisier, E. Dall´Ara, D. H. Pahr:
"A Non-Linear HR-pQCT-Based hFE Model Validation Study for the Human Femur Tested in Fall and Stance Configurations";
Vortrag: 8. Jahrestagung der Deutschen Gesellschaft für Biomechanik,
Neu-Ulm;
15.05.2013
- 17.05.2013.
-
M.H. Luxner:
"Numerische Simulation zellularer Materialien";
Vortrag: 1. Wiener Biomaterialsymposium,
Wien (eingeladen);
04.11.2004
- 05.11.2004.
Zusätzliche Informationen
-
M.H. Luxner:
"Optimization of Mechanically Coupled Composite Pipes by Genetic Algorithms";
Vortrag: 75. Jahrestagung der GAMM,
Dresden;
21.03.2004
- 27.03.2004.
Zusätzliche Informationen
-
M.H. Luxner, H. E. Pettermann:
"Linear and Nonlinear Simulations of Highly Porous Materials";
Vortrag: Euromech Colloquium 459 "Mechanical Behavior of Cellular Solids",
Nancy (eingeladen);
07.06.2004
- 10.06.2004.
Zusätzliche Informationen
-
M.H. Luxner, H. E. Pettermann:
"Modeling and Simulation of Highly Porous Open Cell Structures - Elasto-Plasticity and Localization versus Disorder and Defects";
Vortrag: IUTAM Symposium on Mechanical Properties of Cellular Materials,
Paris;
17.09.2007
- 21.09.2007.
Zusätzliche Informationen
-
M.H. Luxner, J. Stampfl, H. E. Pettermann:
"Disordered Open Cell Structures: Elasto-Plastic Behavior and Defect Sensitivity";
Vortrag: McMAT 2007 - ASME Applied Mechanics and Materials Conference,
Austin, TX;
03.06.2007
- 07.06.2007.
Zusätzliche Informationen
-
M.H. Luxner, J. Stampfl, H. E. Pettermann:
"Nichtlineare Simulation dreidimensionaler offenzelliger Strukturen mit regelmäßigen und gestörten Geometrien";
Vortrag: Workshop Simulation von Schaumstoffen mit stark nichtlinearem Verhalten,
Hohenwart, Deutschland;
15.09.2005
- 16.09.2005.
Zusätzliche Informationen
-
M.H. Luxner, J. Stampfl, H. E. Pettermann:
"Nonlinear Behavior of 3D Regular and Irregular Open Cell Structures";
Vortrag: Third M.I.T. Conference on Computational Fluid and Solid Mechanics,
Cambridge, MA (eingeladen);
14.06.2005
- 17.06.2005.
-
M.H. Luxner, J. Stampfl, H. E. Pettermann:
"Nonlinear Behavior of Regular and Irregular Open Cell Structures";
Vortrag: Euromech Colloquium 466 "Computational and Experimental Mechanics of Advanced Materials",
Loughborough;
20.07.2005
- 22.07.2005.
Zusätzliche Informationen
-
M.H. Luxner, J. Stampfl, A. Woesz, P. Fratzl, H. E. Pettermann:
"Influence of Defects and Perturbations on the Performance of 3D Open Cell Structures";
Vortrag: 3rd European Conference on Computational Mechanics (ECCM 2006),
Lissabon;
05.06.2006
- 09.06.2006.
Zusätzliche Informationen
-
G. Maquer, E. Dall´Ara, P.K. Zysset:
"Boundary Conditions Have Little Effect on Ultimate Load and Damage Distribution in qCT-Based Voxel Models of Lumbar Vertebrae under Axial Compression";
Vortrag: EuroSpine 2011,
Milano;
19.10.2011
- 21.10.2011.
-
P.H. Mayrhofer, F.D. Fischer, H. J. Böhm, C. Mitterer, J.M. Schneider:
"Energetic Balance and Kinetics for the Decompositon of Supersaturated Ti1-xAlxN";
Poster: The International Conference on Metallurgical Coatings and Thin Films, ICMTF 2007,
San Diego, CA;
23.04.2007
- 27.04.2007.
Zusätzliche Informationen
-
P.H. Mayrhofer, D. Music, J.M. Schneider, F.D. Fischer, H. J. Böhm:
"Structure, Elastic Properties, and Phase Stability of Cr_(1-x)Al_xN";
Vortrag: The International Conference on Metallurgical Coatings and Thin Films, ICMCTF 2008,
San Diego, CA;
28.04.2008
- 02.05.2008.
Zusätzliche Informationen
-
G. Mazza, G. Franzoso, M. Pretterklieber, P.K. Zysset:
"Anisotropic Elastic Properties of Vertebral Compact Bone Measured By Microindentation";
Vortrag: 16th Congress of the European Society of Biomechanics,
Luzern;
06.07.2008
- 09.07.2008.
-
L. Mears, L.M. Ostertag, C. Cupak, J. Suppan, M. Fürsatz, B. Engel, M. Marchetti-Deschmann, O.G. Andriotis, P.J. Thurner, S. Nürnberger, M. Valtiner:
"Bio-Adhesion Properties of the Attachment Cement from the Tick Species Dermacentor Marginatus";
Vortrag: 2019 AIChE Annual Meeting,
Orlando (USA);
10.11.2019
- 15.11.2019.
-
A. Meleddu, S. Barrault, P.K. Zysset:
"A novel method for evaluation of the 6D compliance of external fixators";
Vortrag: 14th Conference of the European Society of Biomechanics,
s'Hertogenbosch;
04.07.2004
- 07.07.2004.
-
P. Mesquida, D. Kohl, O.G. Andriotis, P.J. Thurner, M. Duer, S. B. Bansode, G. Schitter:
"Kelvin-Probe Force Microscopy to Map Glycation of Proteins";
Vortrag: AFM BioMed,
Krakow, Poland;
04.09.2017
- 08.09.2017.
-
P. Mesquida, A. Stone, L. Ruiz, D. Kohl, O.G. Andriotis, G. Schitter:
"Using Electrostatic Force Microscopy to Map Biophysical and Biochemical Processes at High Resolution";
Poster: Nano and Photonics & FemtoMat,
Mauterndorf;
20.03.2017
- 25.03.2017.
-
C. Muschitz, R. Kocijan, J. Haschka, D. H. Pahr, A. Kaider, D. Hans, A. Fahrleitner-Pammer:
"TBS Reflects Trabecular Microarchitecture in Premenopausal Women adn Similarly Agend Men with Low Traumatic Fractures";
Poster: ASBMR 2015 Annual Meeting,
Seattle, WA;
09.10.2015
- 12.10.2015.
-
C. Muschitz, D. H. Pahr, M. Kinzl, B. Luisier, A. Zendeli, R. Kocijan, J. Haschka, W. Schima, H. Resch:
"Intravenous Ibandronate Increases Femoral and Vertebral Strength Measured by Finite Element Analysis in Male Patients with Idiopathic Osteoporosis and Fragility Fractures";
Poster: ASMBR 2013 Annual Meeting,
Baltimore, MD;
04.10.2013
- 07.10.2013.
-
M. Nagler, A. Wagner, M. Bartosik, M. Todt, H. J. Böhm:
"Analytical and Numerical Simulation of Residual Stresses in Multilayer Coatings";
Vortrag: Vienna Young Scientists Symposium VSS 2017,
Wien;
01.06.2017
- 02.06.2017.
-
M. Nalbach, O.G. Andriotis, L. Battle, A. Docaj, A. Carriero, P.J. Thurner:
"Nanomechanical Assessment Of Osteogenesis Imperfecta Collagen Fibrils In Indentation And Tension";
Poster: Orthopaedic Research Society Annual Meeting (ORS 2021),
Online;
12.02.2021
- 16.02.2021.
-
M. Nalbach, N. Motoi, F. Chalupa-Gantner, O.G. Andriotis, A. Ovsianikov, G. Schitter, P.J. Thurner:
"Tensile viscoelasticity of individual collagen fibrils";
Vortrag: 2021 NanoScientific Forum Europe (NSFE2021),
Freiburg;
15.09.2021
- 17.09.2021.
-
M. Nalbach, N. Motoi, F. Gantner, O.G. Andriotis, L. Battle, A. Docaj, A. Ovsianikov, G. Schitter, A. Carriero, P.J. Thurner:
"Osteogenesis Imperfecta: Brittle Bones From Stronger Collagen Fibrils";
Vortrag: 26th Congress of the European Society of Biomechanics - ESBiomech,
Mailand;
11.07.2021
- 14.07.2021.
-
M. Nalbach, N. Motoi, F. Gantner, F.C. Spörl, O.G. Andriotis, A. Ovsianikov, G. Schitter, P.J. Thurner:
"Novel instrument for rapid and force controlled tensile testing of single collagen fibrils";
Vortrag: Scientific Meeting of the Austrian Chapter of ESB,
online / Zoom;
30.11.2020.
-
V. Nedelkovski, O.G. Andriotis, R Hahn, P.H. Mayrhofer, P.J. Thurner:
"AFM-based microbeam bending of human cortical bone lamellae from the femur midshaft";
Vortrag: 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019),
Vienna;
18.02.2019
- 22.02.2019.
Zusätzliche Informationen
-
V. Nedelkovski, O.G. Andriotis, P.J. Thurner:
"Micromechanical Three-Point-Bending Test of Lamellae in Cortical Bone";
Vortrag: 21st Congress of the European Society of Biomechanics,
Prag;
05.07.2015
- 08.07.2015.
-
V. Nedelkovski, O.G. Andriotis, P.J. Thurner:
"Orientation-Dependent Micromechanical Three-Point Bending Test of Cortical Bone";
Vortrag: 22nd Congress of the European Society of Biomechanics (ESB 2016),
Lyon;
10.07.2016
- 13.07.2016.
-
V. Nedelkovski, M. Frank, K. Luczynski, Ch. Hellmich, P.J. Thurner:
"Micropillar compression of healthy and osteoporotic human cortical bone from the femoral neck";
Poster: 8th World Congress of Biomechanics, WCB 2018,
Dublin;
08.07.2018
- 12.07.2018.
-
H.N. Nguyen, D. H. Pahr, T. Gross, M.M. Skinner, T.L. Kivell:
"The Biomechanical Role of Trabecular Bone in the Siamang (Symphalangus syndactylus) Manual Proximal Phalanx";
Poster: 3rd Meeting of the European Society for the Study of Human Evolution,
Wien;
20.09.2013
- 21.09.2013.
-
S. Nogales, H. J. Böhm:
"Modelling of Particle Reinforced Heat Sinks";
Vortrag: Sitzung des DGM-Fachausschusses "Metallische Verbundwerkstoffe und zellulare Materialien",
Garching;
06.11.2007.
Zusätzliche Informationen
-
S. Nogales, H. J. Böhm:
"Thermal and Thermomechanical Modeling of Particle Reinforced Composites";
Poster: 2nd IDEA League Summer School "Multiscale Modelling in Materials Science and Engineering",
Simonskall;
23.07.2007
- 28.07.2007.
Zusätzliche Informationen
-
S. Nogales, H. J. Böhm, J.H. You:
"Modeling of Discontinuously Reinforced and Skeleton Heat Sinks";
Vortrag: 5th ExtreMat Progress Meeting,
Jülich;
23.10.2006
- 26.10.2006.
Zusätzliche Informationen
-
S. Nogales, H. J. Böhm, J.H. You:
"Modeling the Thermomechanical Behavior of Ductile Matrix Composites";
Vortrag: ExtreMat SP2 Meeting,
Warschau;
15.10.2007
- 18.10.2007.
Zusätzliche Informationen
-
S. Nogales, H. J. Böhm, J.H. You:
"Modelling of Discontinuously Reinforced and Skeleton Heat Sinks";
Vortrag: ExtreMat SP2 Meeting,
Bratislava;
31.08.2005.
Zusätzliche Informationen
-
S. Nogales, D. Duschlbauer, H. E. Pettermann, H. J. Böhm:
"Analytical and Numerical Modelling of Composites Containing Reinforcements with Finite Interfacial Conductances";
Vortrag: 5th International Conference on Diffusion in Solids and Liquids (DSL 2009),
Rom (eingeladen);
24.06.2009
- 26.06.2009.
-
J.A. Núñez, A. Goring, N. Ferrara, B.R. Olsen, P.J. Thurner, P. Schneider, C.E. Clarkin:
"Regional Changes in Cortical Bone Porosity in Mice Lacking Vascular Endothelial Growth Factor Revealed by Synchrotron X-ray Tomography";
Poster: 44th European Calcified Tissue Society (ECTS) Congress,
Salzburg;
13.05.2017
- 16.05.2017.
-
J.A. Núñez, A. Goring, B. Javaheri, D. Gomez-Nicola, A.A. Pitsillides, P.J. Thurner, P. Schneider, C.E. Clarkin:
"A model to study the role of the vasculature and vascular-specific mediators with ageing for degenerative bone diseases";
Vortrag: 8th World Congress of Biomechanics, WCB 2018,
Dublin;
08.07.2018
- 12.07.2018.
-
J.A. Núñez, A. Goring, P.J. Thurner, P. Schneider, C.E. Clarkin:
"Simultaneous visualisation of calcified bone ultrastructure and intracortical vasculature using synchrotron X‐ray phase‐contrast tomography";
Poster: 44th European Calcified Tissue Society (ECTS) Congress,
Salzburg;
13.05.2017
- 16.05.2017.
-
D. Pahr:
"A Simple Multi-Material Domain Iso-surface Mesher for Medical Images";
Poster: 8th World Congress of Biomechanics, WCB 2018,
Dublin;
08.07.2018
- 12.07.2018.
-
D. Pahr:
"Comparison of morphological analysis software systems";
Vortrag: ECTS 2018,
Valencia (eingeladen);
26.05.2018
- 29.05.2018.
-
D. H. Pahr:
"Biomechanics Meets Anthropology";
Vortrag: MPI-EVA Workshop on Trabecular Bone,
Leipzig;
27.03.2012
- 28.03.2012.
-
D. H. Pahr:
"Biomechanik der Gelenke";
Vortrag: Fachtag Arthrose, Rheuma und Osteoporose 2016,
Wien;
16.04.2016.
-
D. H. Pahr:
"Biomechanische Simulation und Osteoporose";
Vortrag: Osteologie 2016,
Essen (eingeladen);
03.03.2016
- 05.03.2016.
-
D. H. Pahr:
"Bone density frequency models - new insights into age, sex and treatment related changes";
Vortrag: Austrian Bone Conference 2018,
Wien;
23.11.2018
- 24.11.2018.
-
D. H. Pahr:
"Bone Imaging - Blick über den Tellerrand";
Vortrag: 22. Osteoproseforum der ÖGKM,
St. Wolfgang;
08.05.2014
- 10.05.2014.
-
D. H. Pahr:
"Computational Biomechanics at TU-Vienna - Today and Tomorrow";
Vortrag: Seminar der AO-Foundation,
Davos;
27.10.2014.
-
D. H. Pahr:
"Computational Bone Biomechanics - Is this an Innovation we Need to Manage Osteoporosis in Future?";
Hauptvortrag: 23rd Congress of the European Society of Biomechanics,
Sevilla;
02.07.2017
- 05.07.2017.
-
D. H. Pahr:
"Creating FE Models from CT Data";
Vortrag: 21st International Bone Densitometry Workshop & 7th European Symposium on Ultrasonic Characterization of Bone,
Kloster Banz;
26.06.2017
- 30.06.2017.
-
D. H. Pahr:
"CT-Based FE Simulations of Composite Materials: Possibilities, Trends, and Applications";
Vortrag: 27th International Workshop Research in Mechanics of Composites,
Bad Herrenalb;
11.12.2014
- 12.12.2014.
-
D. H. Pahr:
"Einführung in die Finite Elemente Methode";
Vortrag: Altair Engineering Seminar,
Böblingen (eingeladen);
01.02.2005
- 03.02.2005.
-
D. H. Pahr:
"Einführung in die Finite Elemente Methode";
Vortrag: Altair Engineering Seminar,
Böblingen (eingeladen);
05.09.2005
- 07.09.2005.
-
D. H. Pahr:
"FE-Simulation in der klinischen Osteoporoseforschung: Möglichkeiten und Trends";
Poster: 20. Osteoporoseforum der ÖGKM,
St. Wolfgang (eingeladen);
10.05.2012
- 12.05.2012.
-
D. H. Pahr:
"Finite Elemente in der Biomechanik und Orthopädie";
Vortrag: Klinikfortbildung der Universitätsklinik für Orthopädie der MedUni Wien,
Wien (eingeladen);
23.10.2013.
-
D. H. Pahr:
"Gelochte Laminate im Flugzeugbau";
Vortrag: Forum für Metallurgie und Werkstofftechnik 2003,
Leoben (eingeladen);
27.05.2003
- 28.05.2003.
-
D. H. Pahr:
"Grundlagen der Berechnung und Möglichkeiten der Optimierung von Faserverbundstrukturen";
Vortrag: Altair Engineering Seminar,
Böblingen (eingeladen);
13.07.2004.
-
D. H. Pahr:
"Grundlagen der Berechnung und Möglichkeiten der Optimierung von Faserverbundstrukturen";
Vortrag: Altair Engineering Seminar,
Böblingen (eingeladen);
23.09.2004.
-
D. H. Pahr:
"Hierarchical Modeling of Bone";
Vortrag: Workshop on Mechanics of Heterogeneous Materials,
Prag;
19.10.2006
- 20.10.2006.
-
D. H. Pahr:
"Hierarchical Modelling of Composite Aircraft Components";
Vortrag: Aeronautics Days 2006,
Wien;
19.06.2006
- 21.06.2006.
-
D. H. Pahr:
"Image processing, modeling, and simulation";
Vortrag: Additive Manufacturing in Medicine - 1st Symposium,
Wien (eingeladen);
28.11.2018.
-
D. H. Pahr:
"Micro FE of Human Bone";
Vortrag: 1st Computational Science and Engineering Workshop,
Rust;
08.01.2009
- 09.01.2009.
Zusätzliche Informationen
-
D. H. Pahr:
"Nanoindentation und FE-Analyse";
Vortrag: Wissenschaftliche Herbsttagung der ÖGKM 2011,
Wien (eingeladen);
25.11.2011
- 26.11.2011.
-
D. H. Pahr:
"Patient-Specific Finite Element Modeling of Bone: Validation, Multi-Scale Models, Automatization, and Selected Examples";
Vortrag: 7th World Congress of Biomechanics (WCB2014),
Boston, MA;
06.07.2014
- 11.07.2014.
-
D. H. Pahr:
"Vergleich unterschiedlicher Spongiosa/Kortikalis Modellierungen bei humanem Knochen";
Vortrag: 2. Wiener Biomaterialsymposium,
Wien;
22.11.2006
- 24.11.2006.
-
D. H. Pahr:
"Virtuelle Diagnose - Computersimulation von menschlichen Knochen";
Vortrag: HPC-Workshop,
Wien;
18.02.2010
- 19.02.2010.
-
D. H. Pahr, M. Amini, A.G. Reisinger:
"Biomechanical measurement of the fracture risk of a human femur in multiple load directions based on DIC";
Vortrag: The First International Conference on Materials, Mimicking, Manufacturing from and for Bio Application,
Milan, Italy (eingeladen);
27.06.2018
- 29.06.2018.
-
D. H. Pahr, M. Charlebois, Y. Chevalier, H. Allmer, W. Krach, P.K. Zysset:
"A Fast Framework for Modelling the Effective Orthotropic Elastic Properties of Cancellous Bone";
Vortrag: 5th World Congress of Biomechanics,
München;
29.07.2006
- 04.08.2006.
Zusätzliche Informationen
-
D. H. Pahr, Y. Chevalier, P. Varga, P.K. Zysset:
"Modellierungsmöglichkeiten von menschlichen Knochen";
Vortrag: 3. Wiener Biomaterialsymposium,
Wien;
19.11.2008
- 21.11.2008.
-
D. H. Pahr, E. Dall´Ara, P. Varga, P.K. Zysset:
"Homogenized Continuum-Level Finite Element Models Predict Experimental Vertebral Stiffness and Strength with the Same Accuracy as µFE Models";
Vortrag: ESB2010: 17th Congress of the European Society of Biomechanics,
Edinburgh;
05.07.2010
- 08.07.2010.
-
D. H. Pahr, E. Dall´Ara, P. Varga, P.K. Zysset:
"Stiffness and Strength of Human Vertebrae Predicted by Novel Homogenized and Micro Finite Element Models";
Vortrag: ISB 2011 (23rd Congress of the International Society of Biomechanics),
Brüssel;
03.07.2011
- 07.07.2011.
-
D. H. Pahr, E. Dall´Ara, P.K. Zysset:
"Validation of a Novel Homogenized Finite Element and µFE Model by Using Experiments on Vertebral Body Slices";
Vortrag: CBU 2011, Symposium on Computational Biomechanics in Ulm,
Ulm;
25.07.2011
- 26.07.2011.
Zusätzliche Informationen
-
D. H. Pahr, S. Hampel, F. G. Rammerstorfer:
"Extensions and Implementation of Puck's Uni-Directional Layered Laminate Damge Model in a Finite-Element Program";
Vortrag: GAMM Jahreskonferenz 2003,
Abano Terme, Italy;
24.03.2003
- 28.03.2003.
-
D. H. Pahr, M. Kinzl:
"An Experimentally Validated Finite Element Method for Augmented Vertebral Bodies";
Vortrag: 7th World Congress of Biomechanics (WCB2014),
Boston, MA;
06.07.2014
- 11.07.2014.
-
D. H. Pahr, M. Kinzl:
"Vertebroplasty: Standard or Low Modulus Cement?";
Poster: 4. Wiener Biomaterialsymposium,
Wien;
15.11.2010
- 17.11.2010.
-
D. H. Pahr, M. Kinzl, E. Dall´Ara, O. Museyko, K. Engelke, J. Panyasantisuk, P.K. Zysset:
"Femoral strength Computed from QCT-Based Finite Element Analyses is not Influenced by Voxel or Smooth Mesh Type";
Poster: ASMBR 2013 Annual Meeting,
Baltimore, MD;
04.10.2013
- 07.10.2013.
-
D. H. Pahr, M.H. Luxner, K. Kaudela, P.K. Zysset:
"Finite-Elemente Studie einer neuartigen dynamischen Hüft-Prothese";
Vortrag: jahrestagung 2005 der Österreichischen Gesellschaft für Biomedizinische Technik,
Hall;
10.11.2005
- 12.11.2005.
Zusätzliche Informationen
-
D. H. Pahr, C. Marte, F. G. Rammerstorfer, H. J. Böhm:
"Hierarchical Modelling of Perforated Woven Fabric Laminates";
Vortrag: ECCOMAS 2004 (4th European Congress on Computational Methods in Applied Sciences and Engineering),
Jyväskylä (eingeladen);
24.07.2004
- 28.07.2004.
Zusätzliche Informationen
-
D. H. Pahr, L. Peyker:
"Micro FE Modelling and Experimental Comparisons of a Bone-Screw used in Volar Plate Osteosynthesis";
Vortrag: 10th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering,
Berlin;
11.04.2012
- 14.04.2012.
-
D. H. Pahr, F. G. Rammerstorfer:
"Analytical and Computational Models for Investigations of Local Buckling in Honeycomb Sandwiches";
Vortrag: THERMEC 2006 - International Conference on Processing and Manufacturing of Advanced Materials,
Vancouver, BC;
04.07.2006
- 08.07.2006.
Zusätzliche Informationen
-
D. H. Pahr, F. G. Rammerstorfer:
"Experimentelle und numerische Untersuchungen von perforierten Laminaten";
Vortrag: 14. DGM Symposium Verbundwerkstoffe und Werkstoffverbunde,
Wien (eingeladen);
02.07.2003
- 04.07.2003.
-
D. H. Pahr, F. G. Rammerstorfer:
"Meso-Macro Analyses of Perforated Laminates";
Vortrag: International Conference on New Challenges in Mesomechanics,
Aalborg, Denmark;
26.08.2002
- 30.08.2002.
-
D. H. Pahr, F. G. Rammerstorfer:
"Multi-Scale Analyses of Perforated Laminates";
Vortrag: Fifth World Congress on Compuational Mechanics (WCCM V),
Wien (eingeladen);
07.07.2002
- 12.07.2002.
-
D. H. Pahr, J.J. Schwiedrzik, P.K. Zysset:
"Clinical Versus Pre-Clinical Finite Element Models for Vertebral Body Strength Prediction";
Vortrag: 18th Congress of the European Society of Biomechanics (ESB2012),
Lissabon;
01.07.2012
- 04.07.2012.
-
D. H. Pahr, L. Steiner:
"A Critical Comparison of Micro FE based Bone Remodeling Algorithms";
Vortrag: 22nd Congress of the European Society of Biomechanics (ESB 2016),
Lyon;
10.07.2016
- 13.07.2016.
-
D. H. Pahr, S. Ucsnik:
"Investigation of Novel Composite-Metal-Joints";
Vortrag: 11th Euro-Japanese Symposium on Multi-Materials Solutions for Industrial Applications,
Porto (eingeladen);
09.09.2008
- 10.09.2008.
Zusätzliche Informationen
-
D. H. Pahr, P.K. Zysset:
"A Modular Framework for CT-Based Fintite Element Analysis of Human Bones";
Vortrag: Virtual Anthropology Meets Biomechanics,
Wien;
21.10.2010
- 22.10.2010.
-
D. H. Pahr, P.K. Zysset:
"Comparison of Voxel-Based Micro FE and Different Surface-Based Homogenized FE Models of Human Vertebral Bodies";
Vortrag: 8th World Congress on Computational Mechanics (WCCM8) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008),
Lido di Venezia;
30.06.2008
- 04.07.2008.
Zusätzliche Informationen
-
D. H. Pahr, P.K. Zysset:
"Elastic Response of Fabric-Based Femoral and Vertebral Bone Models";
Vortrag: 14th Workshop "The Finite Element Method in Biomedical Engineering, Biomechanics and Related Fields",
Ulm;
18.07.2007
- 19.07.2007.
Zusätzliche Informationen
-
D. H. Pahr, P.K. Zysset:
"Influence of Boundary Conditions on Simulated Overall Effective Properties of Cancellous Bone";
Poster: MHM 2007: Modelling of Heterogeneous Materials,
Prag;
25.06.2007
- 27.06.2007.
Zusätzliche Informationen
-
D. H. Pahr, P.K. Zysset:
"Linear and Non-Linear Finite Element Modeling of Trabecular Bone using Voxel and Smooth Surface Unit Cell Models";
Poster: DGfB biomechanica 2005,
Hamburg;
17.03.2005
- 19.03.2005.
Zusätzliche Informationen
-
D. H. Pahr, P.K. Zysset:
"Virtual Diagnosis - Voxel-based Simulations of Human Bones";
Vortrag: PMAA'10, 6th International Workshop on Parallel Matrix Algorithms and Applications,
Basel (eingeladen);
29.06.2010
- 02.07.2010.
-
D. H. Pahr, P.K. Zysset:
"Voxel-Based Simulations of Human Bones";
Vortrag: GAMM - 82nd Annual Meeting,
Graz;
18.04.2011
- 21.04.2011.
Zusätzliche Informationen
-
D. H. Pahr, P.K. Zysset, M. Stipsitz:
"Efficient non-linear micro FE: results from trabecular biopsies and human radius sections";
Vortrag: 17th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (CMBBE 2021),
Bonn;
07.09.2021
- 09.09.2021.
-
D. Pahr, A. Synek, M. Stipsitz, L. Steiner:
"Micro FE in bone biomechanics - Recent advances";
Vortrag: 11. Kongress der Deutschen Gesellschaft für Biomechanik (DGfB 2019),
Berlin;
03.04.2019
- 05.04.2019.
-
J. Panyasantisuk, E. Dall´Ara, D. H. Pahr, P.K. Zysset:
"Mapping of Trabecular Anisotropy Improves QCT-Based Finite Element Estation of Hip Strength in Pooled Stance and Side-Fall Load Configurations";
Poster: ASBMR 2016 Annual Meeting,
Denver, CO;
16.09.2016
- 19.09.2016.
-
J. Panyasantisuk, D. H. Pahr, P.K. Zysset:
"Effect of Micro-FE Boundary Conditions on Quadric Yield Criteria of Human Trabecular Bone";
Vortrag: 21st Congress of the European Society of Biomechanics,
Prag;
05.07.2015
- 08.07.2015.
-
H. E. Pettermann:
"Continuum Mechanics Modelling of Composite Materials";
Vortrag: Seminar der Kroatischen Gesellschaft für Mechanik,
Zagreb (eingeladen);
20.10.2005.
-
H. E. Pettermann:
"Continuum Micromechanics of Heterogeneous Materials";
Vortrag: 3rd Arctic-Mediterranean Post Graduate Workshop on Intelligent Machines and Transport Systems,
Sevilla;
13.11.2005
- 20.11.2005.
-
H. E. Pettermann:
"Elasto-Plastic-Damage Modeling of Laminated Composites";
Vortrag: Seminar of the Structural Mechanics and Concepts Branch, NASA Langley Research Center,
Hampton, VA (eingeladen);
16.05.2011.
Zusätzliche Informationen
-
H. E. Pettermann:
"Kontinuumsmechanische Modellierung von Verbundwerkstoffen";
Vortrag: Habilitationsvortrag,
Wien;
17.10.2003.
-
H. E. Pettermann:
"Linear Thermo-Viscoelastic Orthotropic Plane Stress Constitutive Law in the Time Domain";
Vortrag: SISSA MathLab Seminar,
Triest;
24.09.2015.
-
H. E. Pettermann:
"Modeling and Simulation of Composite Materials and Components";
Vortrag: SSD Seminar Series WS 2019/2020, School for Simulation and Data Science, RWTH Aachen,
Aachen (eingeladen);
13.02.2020.
-
H. E. Pettermann:
"Modeling and Simulation of Failure and Progressive Damage in Laminated Composites";
Vortrag: MATELCOMP Minisymposium and Final Workshop,
Leoben (eingeladen);
18.04.2005
- 19.04.2005.
Zusätzliche Informationen
-
H. E. Pettermann:
"Modeling and Simulation of Open Cell Biomimetic Structures";
Vortrag: DIMM Seminar,
ETS, Universidad de Sevilla;
27.03.2007.
Zusätzliche Informationen
-
H. E. Pettermann:
"Modeling and Simulation of Open Cell Structures";
Vortrag: Seminar des Max-Planck-Institute for Colloid and Interface Research,
Potsdam (eingeladen);
06.06.2008.
Zusätzliche Informationen
-
H. E. Pettermann:
"Modeling of Cellular Solids";
Vortrag: Kolloquium des Max-Planck-Instituts für Kolloid- und Grenzflächenforschung,
Potsdam (eingeladen);
11.11.2003.
-
H. E. Pettermann:
"Modellierung und Simulation von Schädigung und Versagen von Faserverbund-Bauteilen";
Vortrag: PCCL Symposium Juni 2017,
Leoben (eingeladen);
01.06.2017
- 02.06.2017.
-
H. E. Pettermann:
"Modellierung und Simulation von Verbundwerkstoffen und Bauteilen";
Vortrag: Zukunft der Faserverbundwerkstoffe in der österreichischen Luftfahrtindustrie und -forschung,
Wien;
01.12.2008.
Zusätzliche Informationen
-
H. E. Pettermann:
"Non-linear modeling and simulation of the performance of composite structures --- impact on fabric ply laminates";
Vortrag: CCeV-Thementag "Ermüdung und strukturelle Integrität von Composties",
St. Valentin (eingeladen);
04.04.2019.
-
H. E. Pettermann:
"Numerical Simulation of Damage Processes in Composite Aircraft Components";
Vortrag: 4th FACC Technical Colloquium,
Salzburg (eingeladen);
21.06.2007.
-
H. E. Pettermann:
"Theorie und Anwendung von nichtlinearen Konstitutivgesetzen für Verbundwerkstoffe im Rahmen von FEM-Strukturanalyse";
Vortrag: NAFEMS Seminar "Simulation von Verbunden: Material und Strukturen",
Bad Kissingen;
06.11.2007
- 07.11.2007.
Zusätzliche Informationen
-
H. E. Pettermann:
"Verbundwerkstoffe: Von der Materialmodellierung zur Bauteilberechnung";
Vortrag: innovmat,
Wien;
05.04.2011.
-
H. E. Pettermann, J. Gager, T. Flatscher, E. Rama Lista:
"The Mechanical Performance of Laminated Structures - A Simulation Concept Integrating Ply and Interface Non-Linearities";
Vortrag: Faser-Verbund-Werkstoff - Simulationstag beim CCeV,
Augsburg;
25.10.2012.
-
H. E. Pettermann, J. Gager, M. Meindlhumer, M. Schwab:
"Damage Evolution Predictions in Large Laminated Composite Structures";
Hauptvortrag: CFRAC 2013 - Third International Conference on Modeling of Fracture and Failure of Materials and Structures,
Prag (eingeladen);
05.06.2013
- 07.06.2013.
-
H. E. Pettermann, D. García Vallejo, J. Stampfl, M.H. Luxner, J. Domínguez:
"Viscoelastic Properties of Open Cell Kelvin Foams";
Vortrag: Ictam 2008,
Adelaide;
24.08.2008
- 29.08.2008.
-
H. E. Pettermann, D. García Vallejo, J. Stampfl, M.H. Luxner, J. Domínguez:
"Viskoelastische Eigenschaften von zellulären Strukturen";
Vortrag: 3. Wiener Biomaterialsymposium,
Wien;
19.11.2008
- 21.11.2008.
-
H. E. Pettermann, C.O. Huber, M.H. Luxner, S. Nogales, H. J. Böhm:
"Finite Elastic-Plastic Deformations of MMC Components - Multiscale Mean Field and Unit Cell Simulations";
Vortrag: 35th Solid Mechanics Conference,
Krakau;
04.09.2006
- 08.09.2006.
Zusätzliche Informationen
-
H. E. Pettermann, C.O. Huber, M.H. Luxner, S. Nogales, H. J. Böhm:
"MMC Parts under Finite Elastoplasticity - Mean Field and Unit Cell Simulations";
Vortrag: 3. GAMM-Seminar on Multiscale Material Modelling,
Karlsruhe;
26.06.2009
- 27.06.2009.
Zusätzliche Informationen
-
H. E. Pettermann, C.O. Huber, M.H. Luxner, S. Nogales, H. J. Böhm:
"Multiskalenmodellierung von MMC-Komponenten unter großen Verzerrungen";
Vortrag: Werkstoffkongress 2010,
Leoben (eingeladen);
04.11.2010
- 05.11.2010.
Zusätzliche Informationen
-
H. E. Pettermann, M.H. Luxner, J. Hüsing, C. Gaßner:
"Modeling and Simulation of Relaxation and Damping in Viscoplastic Open Cell Materials and Structures";
Vortrag: IUTAM Symposium: Mechanics of Liquid and Solid Foams,
Austin, TX (eingeladen);
08.05.2011
- 13.05.2011.
Zusätzliche Informationen
-
H. E. Pettermann, M.H. Luxner, J. Stampfl:
"Architecture-Property Correlation of Open Cell Materials by Nonlinear FEM Simulations";
Vortrag: EUROMAT 2009,
Glasgow (eingeladen);
07.09.2009
- 10.09.2009.
Zusätzliche Informationen
-
H. E. Pettermann, M.H. Luxner, A. Woesz, P. Fratzl, J. Stampfl:
"Modellierung und Simulation offenzelliger biomimetischer Strukturen - Elasto-Plastizität und Kollaps versus Unordnung und Defekte";
Vortrag: 2. Wiener Biomaterialsymposium,
Wien;
22.11.2006
- 24.11.2006.
Zusätzliche Informationen
-
H. E. Pettermann, S. Nogales, C.O. Huber, M.H. Luxner, H. J. Böhm:
"Micromechanics Based Structural Analysis of MMC Components under Finite Strains";
Vortrag: 8th World Congress on Computational Mechanics (WCCM8) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008),
Lido di Venezia;
30.06.2008
- 04.07.2008.
Zusätzliche Informationen
-
H. E. Pettermann, C. Schuecker, D. H. Pahr:
"Simulation und Modellierung mechanischer Eigenschaften von Laminaten";
Vortrag: Wissenschaftliches Evaluierungsseminar des Austrian Aeronautics Research Network,
Wien;
13.10.2003.
Zusätzliche Informationen
-
H. E. Pettermann, C. Schuecker, D. H. Pahr, F. G. Rammerstorfer:
"Modeling and Simulation of Aircraft Structures - Stiffness, Damage, and Failure Prediction for Laminated Composites";
Vortrag: 4th FENet Annual Industry Meeting,
Lissabon;
02.12.2004
- 03.12.2004.
Zusätzliche Informationen
-
H. E. Pettermann, S. Suresh:
"Finite Element Unit Cell Predictions of the Entire Overall Elastic, Piezoelectric and Dielectric Behavior of 1-3 Composites";
Vortrag: 7th European Mechanics of Materials Conference (EMMC7),
Frejus;
18.05.2003
- 23.05.2003.
-
F. G. Rammerstorfer:
"Computational treatment of instabilities of thin-walled structures under tension";
Hauptvortrag: Thirteenth International Conference on Computational Structures Technology,
Barcelona (eingeladen);
04.09.2018
- 06.09.2018.
-
F. G. Rammerstorfer:
"FE-Analyse des Erzherzogs Carl von Österreich";
Vortrag: FE im Schnee,
Hirschegg (eingeladen);
14.01.2004
- 17.01.2004.
-
F. G. Rammerstorfer:
"Festigkeitsuntersuchungen am Erzherzog-Karl-Denkmal";
Vortrag: Prof. Maurer 75-Jahre-Festkolloquium,
Leoben (eingeladen);
06.03.2002.
-
F. G. Rammerstorfer:
"Instabilitäten beim Erzeugen dünner Bänder";
Vortrag: Seminar des Instituts für Werkstoffkunde und Werkstoffmechanik der TU München,
München (eingeladen);
04.11.2003.
-
F. G. Rammerstorfer:
"Instabilities at the Nano and Micro Levels as Source of Macroscopic Material Nonlinearities";
Vortrag: Kolloquium über Werkstoffmodellierung,
Stuttgart (eingeladen);
11.06.2015.
-
F. G. Rammerstorfer:
"Leichtbau heute";
Vortrag: Seminar des Christian Doppler Labors für Strukturfestigkeitskontrolle von Leichtbaukonstrukt ionen,
Linz (eingeladen);
27.10.2014.
-
F. G. Rammerstorfer:
"Leichtbauprinzipien";
Vortrag: ASMET Seminar Leichtbau,
Wien (eingeladen);
24.09.2009
- 25.09.2009.
-
F. G. Rammerstorfer:
"Micro-Meso-Macro Analysis of Composite Materials and Structures";
Vortrag: Polnische Akademie der Wissenschaften, Inst. of Fundamental Technology Research,
Warschau (eingeladen);
08.02.2003.
-
F. G. Rammerstorfer:
"Multiscale Modelling of Cellular Structures";
Hauptvortrag: Met Foam 2003,
Berlin (eingeladen);
23.06.2003
- 25.06.2003.
-
F. G. Rammerstorfer:
"Some oddities in plate and shell buckling";
Hauptvortrag: 4th Polish Congress of Mechanics (PCM-CMM 2019),
Krakow (eingeladen);
08.09.2019
- 12.09.2019.
-
F. G. Rammerstorfer:
"Was ist Flaring?";
Vortrag: XXIII. Verformungskundliches Kolloquium,
Planneralm (eingeladen);
29.02.2004
- 06.03.2004.
Zusätzliche Informationen
-
F. G. Rammerstorfer, C. Bilik:
"Verbesserung des Stabilitätsverhaltens von dünnwandingen Strukturen";
Vortrag: Workshop des COMET-K2 Kompetenzzentrums MPPE,
Leoben (eingeladen);
08.06.2011
- 09.06.2011.
Zusätzliche Informationen
-
F. G. Rammerstorfer, T. Daxner, F.D. Fischer, T. Flatscher, D. H. Pahr, M. Todt:
"Instabilities in Materials at the Nano, Micro and Meso Scale";
Hauptvortrag: ECCM2010, European Conference on Computational Mechanics 2010,
Paris (eingeladen);
21.05.2010
- 26.05.2010.
Zusätzliche Informationen
-
F. G. Rammerstorfer, T. Daxner, D. H. Pahr:
"Zelluläre Strukturen in Natur und Technik";
Hauptvortrag: 5. Ranshofener Leichtmetalltage 2008,
Geinberg (eingeladen);
28.05.2008
- 29.05.2008.
-
F. G. Rammerstorfer, T. Daxner, D. H. Pahr, W.K. Vonach:
"Hierarchical Modelling of Composite Materials and Material Compounds for Aerospace Applications";
Vortrag: Special Lecture at the Department of Aeronautics and Astronautics of the University of Tokyo,
Tokyo (eingeladen);
10.10.2006.
-
F. G. Rammerstorfer, F. Fischer, T. Daxner, C. Bilik, N. Friedl:
"On Instabilities Appearing during the Production of Plates and Shells";
Vortrag: 7th EUROMECH Solid Mechanics Conference - ESMC 2009,
Lissabon (eingeladen);
07.09.2009
- 11.09.2009.
Zusätzliche Informationen
-
F. G. Rammerstorfer, F.D. Fischer, N. Friedl:
"Stability Problems Related to Thin Strip Production";
Vortrag: 5th Euromech Solid Mechanics Conference ESMC-5,
Thessaloniki;
17.08.2003
- 22.08.2003.
-
F. G. Rammerstorfer, F.D. Fischer, N. Friedl, T. Daxner:
"Instabilities Resulting from the Production Process of Plates and Shells";
Hauptvortrag: Eighth International Conference on Computational Structures Technology,
Las Palmas de Gran Canaria (eingeladen);
12.09.2006
- 15.09.2006.
Zusätzliche Informationen
-
F. G. Rammerstorfer, B. Hößl, H.E. Dechant, H. J. Böhm, F.G. Barth:
"Computational Biomechanics of Sensory Organs in Spiders";
Hauptvortrag: Sixth International Conference on Engineering Computational Technology (ECT2008),
Athen (eingeladen);
02.09.2008
- 05.09.2008.
-
F. G. Rammerstorfer, D. H. Pahr, T. Daxner:
"Micro- and Meso-Instabilities in Structured Composite Materials and Material Compounds";
Vortrag: 19th International Workshop "Research in Mechanics of Composites",
Bad Herrenalb;
26.11.2006
- 29.11.2006.
Zusätzliche Informationen
-
F. G. Rammerstorfer, D. H. Pahr, T. Daxner, N. Friedl:
"Buckling in Thin Walled Macro and Meso Structures of Lightweight Materials and Material Compounds";
Vortrag: WCCM VI,
Beijing (eingeladen);
05.09.2004
- 10.09.2004.
Zusätzliche Informationen
-
F. G. Rammerstorfer, F. Toth:
"Cracking and Buckling of Thin Metallic Films on Polymeric Substrate Under Global Tension - A Computational Approach";
Vortrag: 2016 EMI International Conference,
Metz;
25.10.2016
- 27.10.2016.
-
F. G. Rammerstorfer, F. Toth:
"Simulating the Evolution of Crack Patterns and Buckles in Thin Metallic Films";
Vortrag: 8th International Congress of the Croatian Society of Mechanics,
Rijeka;
29.09.2015
- 02.10.2015.
-
F. G. Rammerstorfer, W.K. Vonach:
"Face Layer Wrinkling in Sandwich-Shells of General Configuration";
Vortrag: 2nd MIT Conference on Computational Fluid and Solid Mechanics,
Cambridge, MA (eingeladen);
17.06.2003
- 20.06.2003.
-
L. Rapillard, R. Müller, P.K. Zysset:
"Compressive fatigue behaviour of human vertebral trabecular bone";
Vortrag: 50th Annual Meeting of the Orthopaedic Research Society,
San Francisco, CA;
07.03.2004
- 10.03.2004.
Zusätzliche Informationen
-
A. Rasool, H. J. Böhm:
"Thermomechanical Behavior of Composites Reinforced by Spherical and Non-Spherical Particles";
Vortrag: 20th International Workshop on Computational Mechanics of Materials (IWCMM 20),
Loughborough, UK;
08.09.2010
- 10.09.2010.
Zusätzliche Informationen
-
M. Rauner, W. Sipos, J. Patsch, D. Krenbek, P. Varga, P.K. Zysset, P. Pietschmann:
"Osteoblast- and T- Cell-Mediated RANKL Expression does not Contribute to Age-Related Osteoclastogenesis in a Murine Model";
Poster: 36th European Symposium on Calcified Tissues,
Wien;
23.05.2009
- 27.05.2009.
-
A.G. Reisinger, D. Pahr:
"Visco-Plastic Mechanical Properties of Implanted Bone Screws Identified by Rheological Modeling";
Poster: 8th World Congress of Biomechanics, WCB 2018,
Dublin;
08.07.2018
- 12.07.2018.
-
A.G. Reisinger, D. H. Pahr, P.K. Zysset:
"Micromechanics of Lamellar Bone";
Vortrag: Dreiländertagung 2011 der ÖGMP, DGMP und SGSMP,
Wien;
28.09.2011
- 01.10.2011.
Zusätzliche Informationen
-
A.G. Reisinger, D. H. Pahr, P.K. Zysset:
"Sensitivitätsanalyse der Steifigkeiten des unidirektionalen Fibrillenverbunds in lamellarem Knochen";
Poster: Wissenschaftliche Herbsttagung 2009 der Österreichischen Gesellschaft zur Erforschung des Knochens und des Mineralstoffwechsels,
Wien;
21.11.2009.
Zusätzliche Informationen
-
A.G. Reisinger, D. H. Pahr, P.K. Zysset:
"Sensitivity Study of Mineralized Bone Fibril-Array Stiffness";
Poster: 6. Jahrestagung der Deutschen Gesellschaft für Biomechanik,
Münster;
14.05.2009
- 16.05.2009.
Zusätzliche Informationen
-
L. Rincón-Kohli, P.K. Zysset:
"The multiaxial failure criterion for human trabecular bone depends on volume fraction and fabric";
Vortrag: 50th Annual Meeting of the Orthopaedic Research Society,
San Francisco, CA;
07.03.2004
- 10.03.2004.
Zusätzliche Informationen
-
A. Rohatschek, O.G. Andriotis, P. Steinbauer, S. Baudis, P.J. Thurner:
"AFM SMFS of individual collagen molecules";
Vortrag: 2021 NanoScientific Forum Europe (NSFE2021),
Freiburg;
15.09.2021
- 17.09.2021.
-
A. Rohatschek, P. Steinbauer, O.G. Andriotis, C. Dworak, S. Baudis, M. M. Unterlass, P.J. Thurner:
"Experimental Mechanics of Collagen Molecules";
Poster: AFM BioMed Conference Krakow 2017,
Krakau;
05.09.2017
- 08.09.2017.
-
A. Rohatschek, P. Steinbauer, S. Baudis, P.J. Thurner:
"AFM SMFS measurements of individual collagen molecules";
Poster: 13th European Biophysics Conference (EBSA),
Vienna;
24.07.2021
- 28.07.2021.
-
A. Rohatschek, Z. Zappone, P.J. Thurner:
"Electrostatic interactions and adhesion of nanoscale collagen films";
Poster: Orthopaedic Research Society Annual Meeting (ORS 2021),
Online;
12.02.2021
- 16.02.2021.
-
A. Rohatschek, Z. Zappone, P.J. Thurner:
"Investigation of nanoscale collagen films by SFA";
Poster: 733rd WE-Heraeus-Seminar for Nanobiotechnology for Cell Interfaces,
Online;
17.03.2021
- 18.03.2021.
-
M. Rufin, M. Nalbach, O.G. Andriotis, M. Poik, G. Schitter, P.J. Thurner:
"AGE-related changes in indentation stiffness and surface charge of individual collagen fibrils through MGO glycation";
Poster: 13th European Biophysics Conference (EBSA),
Vienna;
24.07.2021
- 28.07.2021.
-
M. Rufin, M. Nalbach, O.G. Andriotis, M. Poik, G. Schitter, P.J. Thurner:
"Effect of glycation on surface charge and indentation stiffness of individual collagen fibrils";
Vortrag: Scientific Meeting of the 2021 Austrian Chapter of ESB,
Online;
30.11.2021.
-
M. Rufin, M. Nalbach, O.G. Andriotis, M. Poik, G. Schitter, P.J. Thurner:
"Effect of glycation on surface charge and indentation stiffness of individual collagen fibrils";
Poster: Orthopaedic Research Society Annual Meeting (ORS 2021),
Online;
12.02.2021
- 16.02.2021.
-
M. Rufin, M. Nalbach, O.G. Andriotis, M. Poik, G. Schitter, P.J. Thurner:
"Glycation increases indentation stiffness and decreases surface charge of individual collagen fibrils";
Vortrag: 26th Congress of the European Society of Biomechanics - ESBiomech,
Mailand;
11.07.2021
- 14.07.2021.
-
M. Schasching, R. Duy, T. Ceglar, M. Todt, H. E. Pettermann:
"Simulation of The Wrinkling of Thin Hyperelastic Composite Strips under Global Tensile Loading";
Vortrag: 8th ECCOMAS Thematic Conference on the Mechanical Response of Composites,
Göteborg;
22.09.2021
- 24.09.2021.
-
M.M. Schasching, M. Todt, M. Humer, P. Hoffmann, M. Schwab, H. E. Pettermann:
"Simulating Ply Damage and Delamination in Laminated Composites - An Extended Shell-Based Ply-Level Approach";
Vortrag: 20th International Conference on Composite Structures (ICCS20),
Paris;
04.09.2017
- 07.09.2017.
-
M. Schöbel, H. J. Böhm, H.P. Degischer, S. Nogales:
"Particle reinforced materials for heat sink applications interface bonding and conductivity modeling";
Poster: Hannover Messe,
Hannover;
21.04.2008
- 23.04.2008.
-
C. Schuecker, D. H. Pahr, H. E. Pettermann:
"Numerical Simulation of Composite Structures - First Ply Failure under Non-Proportional Loading";
Vortrag: 6th International Conference for Mesomechanics,
Patras;
31.05.2004
- 04.06.2004.
Zusätzliche Informationen
-
C. Schuecker, D. H. Pahr, H. E. Pettermann:
"Numerical Simulation of Failure in Layered Fiber Reinforced Composites in the Presence of Residual Stresses";
Vortrag: 5th Euromech Solid Mechanics Conference ESMC-5,
Thessaloniki;
17.08.2003
- 22.08.2003.
Zusätzliche Informationen
-
C. Schuecker, H. E. Pettermann:
"Constitutive Ply Damage Modeling, FEM Implementation, and Analysis of Laminated Structures";
Vortrag: 3rd European Conference on Computational Mechanics (ECCM 2006),
Lissabon;
05.06.2006
- 09.06.2006.
Zusätzliche Informationen
-
C. Schuecker, H. E. Pettermann:
"Failure Prediction of Layered Fiber Reinforced Composites in the Presence of Residual Stresses";
Poster: Einsteins in the City,
New York, NY;
11.04.2005
- 12.04.2005.
Zusätzliche Informationen
-
M. Schwab:
"Modellierungsansätze zur Beschreibung des Schädigungsverhaltens von Faserverbundwerkstoffen unter Ermüdungsbelastung";
Vortrag: CCeV-Thementag "Zuverlässigkeit und Lebendauer von CFK-Bauteilen",
St.Martin/Innkreis;
08.09.2016.
-
M. Schwab:
"Modelling and Simulation of the Impact Behaviour of Fibre Reinforced Laminates and Components";
Vortrag: Seminar des Instituts für Mechanik, MU Leoben,
Leoben;
07.12.2016.
-
M. Schwab, A. Grabos, H. E. Pettermann:
"Nonlinear FEM Simulations of a Laminated Textile Composite Component - A Multi Scale Embedding Approach";
Vortrag: mechcomp 2016 - 2nd International Conference on Mechanics of Compositesmechcomp 2016,
Porto;
11.07.2016
- 14.07.2016.
-
M. Schwab, H. E. Pettermann:
"Modelling Laminated Fabric Composites under Impact Loads";
Vortrag: 24th International Congress of Theoretical and Applied Mechanics,
Monreal, PQ;
21.08.2016
- 26.08.2016.
-
M. Schwab, M. Todt, J Tauchner, H. E. Pettermann:
"FEM simulations of high velocity impact discerning various ply and interface damage mechanisms";
Vortrag: International Conference on Composite Structures ICCS21,
Bologna, Italy;
04.09.2018
- 07.09.2018.
-
J. Segurado, S. Nogales, J. LLorca, H. J. Böhm:
"The Coupling of Interface Decohesion and Ductile Matrix Fracture in Composites";
Vortrag: 43rd Annual Technical Meeting of the Society of Engineering Science,
University Park, PA;
13.08.2006
- 16.08.2006.
Zusätzliche Informationen
-
I. Sidorenko, J.S. Bauer, R. Monetti, D. Müller, E. Rummeny, F. Eckstein, M. Matsuura, E.M. Lochmüller, P.K. Zysset, C. Räth:
"Comparison of Combination of Different Methods (FEM, SIM, MF) for Description of Global and Local Features of the Trabecular Bone Network";
Vortrag: The XIth Congress of the International Society of Bone Morphometry,
Zell am See;
28.05.2009
- 30.05.2009.
-
J. D. Silva-Henao, D. H. Pahr, A.G. Reisinger:
"Bone sample selection for screw mechanical testing based on peri-implant CT morphometry";
Poster: 26th Congress of the European Society of Biomechanics - ESBiomech,
Mailand;
11.07.2021
- 14.07.2021.
-
W. Sipos, E. Kralicek, M. Rauner, C. Duvigneau, H. Worliczek, D. Schamall, R.T. Hartl, I. Sommerfeld-Stur, E. Dall´Ara, P. Varga, H. Resch, P.K. Zysset, P. Pietschmann:
"The Skeleton of Multiparous Sows is Protected from Effects of Ovariectomy and Calcium Deprivation";
Poster: 3rd Joint Meeting of ECTS and IBMS,
Athen;
07.05.2011
- 11.05.2011.
-
W. Sipos, E. Kralicek, M. Rauner, C. Duvigneau, H. Worliczek, D. Schamall, I. Sommerfeld-Stur, E. Dall´Ara, P. Varga, H. Resch, P.K. Zysset, P. Pietschmann:
"The Skeleton and the Cellular Immune System of Miltiparous Sows are Protected From Effects of Ovariectomy and Calcium Deprivation";
Poster: Wissenschaftliche Herbsttagung der ÖGKM 2010,
Wien;
26.10.2010
- 27.10.2010.
-
W. Sipos, P.K. Zysset, E. Mayrhofer, E. Kralicek, M. Stolina, D. Dwyer, P. Kostenuik, M. Rauner, I. Sommerfeld-Stur, P. Pietschmann:
"Single Treatment of Pigs with rhOPG-Fc Has an Impact on Bone Metabolism, Trabecular Structure and Bone Mineralisation";
Vortrag: 3rd International Conference on Osteoimmunology: Interactions of the Immune and Skeletal Systems,
Santorini;
20.06.2010
- 25.06.2010.
-
I.C. Skrna-Jakl:
"Anwendungsbeispiele aus der Lehre und Forschung am Institut für Leichtbau und Struktur-Biomechanik der TU Wien";
Vortrag: 10. Altair Anwendertreffen für Hochschulen,
Böblingen;
07.03.2016.
-
I.C. Skrna-Jakl:
"Polymermatrixverbundwerkstoffe: Materialaufbau-Werkstoffauswahl-Materialverhalten";
Vortrag: ASMET Seminar Leichtbau,
Wien (eingeladen);
24.09.2009
- 25.09.2009.
-
I.C. Skrna-Jakl, K.H. Karner, D. H. Pahr, F. G. Rammerstorfer:
"Numerical and Experimental Investigations of the Stiffness and Strength Behavior of Corrugated Core Sandwich Panels";
Vortrag: 7th World Congress on Computational Mechanics (WCCM-7),
Los Angeles, CA;
16.07.2006
- 22.07.2006.
-
I.C. Skrna-Jakl, D. H. Pahr:
"Influence of specific core reinforcement designs on the stiffness behaviour of hybrid core sandwich panels";
Vortrag: 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019),
Vienna;
18.02.2019
- 22.02.2019.
Zusätzliche Informationen
-
I.C. Skrna-Jakl, D. H. Pahr:
"Numerical Investigations of the Out-of-plane Stiffness Behavior of Hybrid Core Sandwich Panels";
Vortrag: 13th World Congress on Computational Mechanics (WCCM2018),
New York;
22.07.2018
- 27.07.2018.
-
I.C. Skrna-Jakl, D. H. Pahr, K.H. Karner, F. G. Rammerstorfer:
"Homogenization Technique for the Efficient Modeling of Large Scale Corrugated Core Sandwich Structures";
Vortrag: 4th International Conference on Applied Physics and Mathematics (ICAPM 2104),
Singapore;
19.02.2014
- 20.02.2014.
-
I.C. Skrna-Jakl, D. H. Pahr, F. G. Rammerstorfer:
"Computational Design of Large Scale Corrugated Core Sandwich Structures Employing a Multiscale Analysis Concept";
Vortrag: Seminar des Instituts für Mechanik, TU Berlin,
Berlin;
18.09.2013.
-
I.C. Skrna-Jakl, F. G. Rammerstorfer:
"Modellierung und numerische Simulation von Leichtbaumaterialien und Leichtbaustrukturen";
Vortrag: euroLITE Internationale Fachmesse für Leichtbaukonstruktionen,
Salzburg;
26.06.2007
- 27.06.2007.
-
E. Soodmand, D. Kluess, P. Varady, R. Cichon, M. Schwarze, D. Gehweiler, D. H. Pahr, M. Woiczinski:
"Benchmark Accuracy Assessment of CT Image-Based Reconstructed Human Femur Using 3D Optical Scan";
Vortrag: 23rd Congress of the European Society of Biomechanics,
Sevilla;
02.07.2017
- 05.07.2017.
-
E. Spiesz, P.K. Zysset:
"Experimental Validation of a Multiscale Model of Mineralized Collagen Fibers at Two Levels of Hierarchy";
Poster: 2nd Asia-Pacific Osteoporosis and Bone Meeting,
Gold Coast;
04.09.2011
- 08.09.2011.
Zusätzliche Informationen
-
M. Springer, H. E. Pettermann:
"Fatigue Damage Modeling of Power Semiconductor Devices";
Vortrag: Vortragsreihe der Arbeitsgruppe AMADE, Universitat de Girona,
Girona (eingeladen);
22.09.2016.
-
M. Springer, H. E. Pettermann, M. Nelhiebel, B. Karunamurthy:
"Damage Mechanics for Reliability: FEM-Predictions of Material Degradation in Cu Power Metallization";
Poster: Infineon Innovation Days 2015,
Villach;
05.05.2015.
-
M. Springer, H. E. Pettermann, M. Nelhiebel, B. Karunamurthy:
"FEM - Fatigue Modeling Approach for Damage Propagation and Lifetime Estimation";
Poster: Campeon Innovation Week 2015,
München;
09.11.2015
- 13.11.2015.
-
M. Springer, M. Schwab, H. E. Pettermann:
"Simulation of Ply Damage and Delamination in Multilayer Composites to Predict the Residual Compressive Strength after Impact Loading";
Vortrag: IV International Conference on Computational Modeling of Fracture and Failure of Materials and Structure (CFRAC 2015),
Cachan;
03.06.2015
- 05.06.2015.
-
P. Steinbauer, C. Dworak, S. Baudis, P.J. Thurner, O.G. Andriotis, R. Liska:
"Phosphorus-based RAFT Polymers for Bio-Adhesion";
Poster: 1st Vienna Polymer-Group Symposium,
Wien;
27.02.2018.
Zusätzliche Informationen
-
P. Steinbauer, A. Rohatschek, P.J. Thurner, A. Orestis, R. Liska, S. Baudis:
"Adhesion measurement of binding motifs for bone glue applications";
Poster: 2nd INTERREG - 7th TERMIS Winterschool 2019 "Musculoskeletal Tissue Regeneration: From Mechanobiology to in Vitro/in Vivo Models and Advanced Imaging",
Radstadt;
13.01.2019
- 16.01.2019.
Zusätzliche Informationen
-
L. Steiner, D. H. Pahr:
"Creation of Smooth Meshes with Homologous Regions based on Free-Form B-Spline Registration";
Vortrag: 23rd Congress of the European Society of Biomechanics,
Sevilla;
02.07.2017
- 05.07.2017.
-
N.B. Stephens, T.L. Kivell, D. H. Pahr, A.H. Gee, G.M. Treece, J. Hublin:
"Signals of Loading and Function in the Human Hand: A Multi-Method Analysis of the External Cortical and Internal Trabecular Bone of the Metacarpals";
Poster: 85th Annual Meeting of the American Association of Physical Anthropologists,
Atlanta, GA;
12.04.2016
- 16.04.2016.
-
N.B. Stephens, T.L. Kivell, D. H. Pahr, J. Hublin, M.M. Skinner:
"Trabecular Bone Patterning across the Human Hand: Implications for Reconstructing Behaviour and Manipulation in Past Populations";
Poster: 7th Annual Meeting of the European Society for the study of Human Evolution,
Leiden;
21.09.2017
- 23.09.2017.
-
N.H. Stevens, T.L. Kivell, H.N. Nguyen, T. Gross, D. H. Pahr, J. Hublin, M.M. Skinner:
"Trabecular Bone Architecture in the Thumb of Homo and Pan: Handedness and Evidence for Taxonomical Differences";
Poster: 3rd Meeting of the European Society for the Study of Human Evolution,
Wien;
20.09.2013
- 21.09.2013.
-
N.H. Stevens, T.L. Kivell, H.N. Nguyen, D. H. Pahr, T. Gross, J. Hublin, M.M. Skinner:
"Trabecular Bone Architecture in the Thumb of Recent Homo sapiens, Pan, and Late Pleistocene Homo: Taxonomic Differences and Evidence for Handedness";
Vortrag: 82ndAnnual Meeting of the American Association of Physical Anthropologists,
Knoxville, TN;
09.04.2013
- 13.04.2013.
-
M. Stipsitz, D. H. Pahr:
"An efficient solver for CT based nonlinear microFE simulations of trabecular structures";
Vortrag: 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019),
Vienna;
18.02.2019
- 22.02.2019.
Zusätzliche Informationen
-
M. Stipsitz, A. Synek, P. Stefanek, D. Pahr:
"Non-linear micro FE in bone biomechanics";
Vortrag: Scientific Meeting of the Austrian Chapter of ESB,
online / Zoom;
30.11.2020.
-
M. Stipsitz, P.K. Zysset, D. H. Pahr:
"An efficient solver for large-scale simulations of voxel-based structures using a nonlinear damage material model";
Vortrag: 6th European Conference on Computational Mechanics (Solids, Structures and Coupled Problems) (ECCM 6),
Glasgow, UK;
11.06.2018
- 15.06.2018.
-
M. Stipsitz, P.K. Zysset, D. H. Pahr:
"Influence of Stress Redistributions in μFEA on the Predicted Failure Load of Radius Segments";
Vortrag: 26th Congress of the European Society of Biomechanics - ESBiomech,
Mailand;
11.07.2021
- 14.07.2021.
-
M. Stipsitz, P.K. Zysset, D. H. Pahr:
"Simplified Model for Efficient Nonlinear Material Finite Element Simulations of Trabecular Bone";
Vortrag: 23rd Congress of the European Society of Biomechanics,
Sevilla;
02.07.2017
- 05.07.2017.
-
P. Stoodley, A. Rmaile, S. Fabbri, D. Carugo, M. Aspiras, M. de Jager, M. Ward, P.J. Thurner, A.W. Decho, N. Noffke:
"The Mechanical Properties of Bacterial Biofilms as a Strategy for Survival in Ancient and Modern Environments";
Vortrag: Biofilms6,
Wien;
11.05.2014
- 13.05.2014.
-
A. Synek, S. Baumbach, D. H. Pahr:
"CT-Based Finite Element Modelling of Plated Distal Radius Fracture Osteosynthesis: Evaluation against Experimental Measurements";
Vortrag: 21st Congress of the European Society of Biomechanics,
Prag;
05.07.2015
- 08.07.2015.
-
A. Synek, S. Baumbach, D. H. Pahr:
"CT-Based Finite Element Models of Locking Plate Fracture Fixations for the Prediction of Stiffness and Screw Loads";
Vortrag: 21st Congress of the European Society of Biomechanics,
Prag;
05.07.2015
- 08.07.2015.
-
A. Synek, S.F. Baumbach, D. H. Pahr:
"Towards optimization of plate fracture fixations at the distal radius: Using FEA to reduce the number of screws";
Vortrag: 26th Congress of the European Society of Biomechanics - ESBiomech,
Mailand;
11.07.2021
- 14.07.2021.
-
A. Synek, S.F. Baumbach, D. H. Pahr:
"Towards optimization of volar plate fixations of distal radius fractures: using finite element analyses to reduce the number of screws";
Vortrag: 29th Annual Meeting of the EUROPEAN ORTHOPAEDIC RESEARCH SOCIETY,
Rome;
15.09.2021
- 17.09.2021.
-
A. Synek, Y. Chevalier, J. Binder, S.F. Baumbach, D. H. Pahr:
"The Influence of Bone Density and Orientation on Stiffness Predictions of Distal Radius Fracture Osteosynthesis Using the Finite Element Method";
Vortrag: V. Münchner Symposion für Experimentelle Orthopädie, Unfallchirurgie und Muskuloskelettale Forschung,
München;
06.03.2015
- 07.03.2015.
-
A. Synek, Y. Chevalier, J. Binder, S.F. Baumbach, D. H. Pahr:
"The Influence of Different Bone Material Modelling Strategies on Finite Element Models of Distal Radius Fracture Osteosynthesis";
Vortrag: 9. Jahrestagung der Deutschen Gesellschaft für Biomechanik,
Bonn;
06.05.2015
- 08.05.2015.
-
A. Synek, Y. Chevalier, J. Binder, D. H. Pahr, S.F. Baumbach:
"Validierung von Finite Elemente Modellen distaler Radiusfraktur-Osteosynthese: Relevanz der lokalen Knochendichte und -orientierung";
Poster: Deutscher Kongress für Orthopädie und Unfallchirurgie,
Berlin;
20.10.2015
- 23.10.2015.
-
A. Synek, Y. Chevalier, Y. Schröder, D. H. Pahr, S.F. Baumbach:
"Einfluss der Randbedingungen in biomechanischen Experimenten distaler Radiusfrakturen: Eine biomechanische Studie";
Poster: 55. Kongress der Deutschen Gesellschaft für Handchirurgie,
Baden-Baden;
09.10.2014
- 11.10.2014.
-
A. Synek, Ch. J. Dunmore, T.L. Kivell, M.M. Skinner, D. Pahr:
"Using an inverse bone remodelling approach to predict joint loads: Sensitive enough to detect different habitual activities?";
Vortrag: 8th World Congress of Biomechanics, WCB 2018,
Dublin;
08.07.2018
- 12.07.2018.
-
A. Synek, S.C. Lu, E.E. Vereecke, T.L. Kivell, D. Pahr:
"Identifikation optimaler Parameter eines muskuloskelettalen Fingermodells";
Vortrag: Deutscher Kongress für Orthopädie und Unfallchirurgie 2019,
Berlin;
22.10.2019
- 25.10.2019.
-
A. Synek, D. H. Pahr:
"Parameter Sensitivity and Plausibility of Micro FE Based Joint Load Prediction at the Proximal Femur";
Vortrag: 23rd Congress of the European Society of Biomechanics,
Sevilla;
02.07.2017
- 05.07.2017.
-
A. Synek, D. H. Pahr:
"The Effect of the Extensor Mechanism for the Force Producing Capabilities of a Human Finger";
Vortrag: 22nd Congress of the European Society of Biomechanics (ESB 2016),
Lyon;
10.07.2016
- 13.07.2016.
-
P.J. Thurner:
"Bone Microcracks and Diffuse Damage: Imaging, Biomechanics and Clinical Aspects";
Vortrag: 44th European Calcified Tissue Society (ECTS) Congress,
Salzburg;
13.05.2017
- 16.05.2017.
-
P.J. Thurner:
"Collagen - the glue holding our bodies together";
Hauptvortrag: TUG/KFU Physics Colloquium Winter 2021,
Graz;
19.10.2021.
-
P.J. Thurner:
"Mechanics of Individual Collagen Fibrils - Influence of Disease, Age and Hydration";
Vortrag: 1st BioBrillouin Meeting - Conference on Brillouin Light Scattering Microspectroscopy for Biological and Biomedical Research and Applications,
Vienna;
13.09.2017
- 15.09.2017.
-
P.J. Thurner:
"Micro- and Nanomechanics from AFM Upwards and Relevant Clinical Studies";
Vortrag: ISB 2015 (25th Congress of the International Science of Biomechanics),
Glasgow;
12.07.2015
- 17.07.2015.
-
P.J. Thurner:
"Micro- and Nanomechanics of Collagen-rich Tissues, Collagen Fibrils and Tropocollagen Molecules";
Hauptvortrag: International Conference and School on Physics in Medicine and Biosystems,
Depok, Indonesia (eingeladen);
06.11.2020
- 08.11.2020.
-
P.J. Thurner, O.G. Andriotis, S. Desissaire, M.G. Jones, D.E. Davies:
"Experimental micro- and nanomechanics of collagen rich-tissues and individual collagen fibrils";
Vortrag: 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019),
Vienna;
18.02.2019
- 22.02.2019.
Zusätzliche Informationen
-
P.J. Thurner, O.G. Andriotis, S. Desissaire, M.G. Jones, C. Thorpe, E. Spiesz, A. Rohatschek, M. Nalbach, G. Schitter, H.R.C. Screen, D.E. Davies:
"Micromechanics of collagen rich-tissues and nanomechanics of individual collagen fibrils as a function of hydration, cross-linking, age and tissue function";
Vortrag: 8th World Congress of Biomechanics, WCB 2018,
Dublin (eingeladen);
08.07.2018
- 12.07.2018.
-
P.J. Thurner, S. Desissaire, A. Rohatschek, M. Nalbach, G. Schitter, O.G. Andriotis:
"Collagen mechanics at the fibril level and below as a function of hydration, cross-linking, age and tissue function";
Vortrag: XX. Linz Winter Workshop,
Linz (eingeladen);
02.02.2018
- 06.02.2018.
-
P.J. Thurner, T. Jenkins, O.G. Andriotis, O.L. Katsamenis, L.V. Coutts, T. Li, V. Nedelkovski, D. G. Dunlop, R.O.C. Oreffo, C. Cooper, N.C. Harvey:
"What is the Relevance of Bone Material Properties for Osteoporotic Fractures?";
Hauptvortrag: 21st Congress of the European Society of Biomechanics,
Prag;
05.07.2015
- 08.07.2015.
-
P.J. Thurner, O.L. Katsamenis, S. Nobakhti, T. Jenkins, N.C. Harvey, G. Limbert:
"Micro- and Nanomechanics of Bone Affect Mechanical Performance and Mechanobiology";
Vortrag: 7th World Congress of Biomechanics (WCB2014),
Boston, MA;
06.07.2014
- 11.07.2014.
-
M. Todt:
"Continuum mechanical modeling at the nanoscale: Application to carbon nano-structures and multilayer thin films";
Vortrag: Vortragsreihe des Instituts für Mechanik, TU Berlin,
Berlin (eingeladen);
09.08.2017.
-
M. Todt:
"Continuum Mechanics Modeling of Materials: Aims, Modeling Concepts, and Examples";
Vortrag: WAE:sf - women from arts to engineering for a sustainable future,
Berlin (eingeladen);
07.10.2021.
-
M. Todt:
"Simulation of the Thermo-Mechanical Behavior of Undulated Thin Films";
Poster: Joint Annual Meeting of DMV and GAMM 2016,
Braunschweig;
07.03.2016
- 11.03.2016.
-
M. Todt, M. Bartosik, H. J. Böhm, F. G. Rammerstorfer, P.H. Mayrhofer:
"Influence of Undulations on the Thermo-Mechanical Behavior of Thin Film-Substrate Systems";
Vortrag: Joint Annual Meeting of DMV and GAMM 2016,
Braunschweig;
07.03.2016
- 11.03.2016.
-
M. Todt, T. Daxner:
"Long Wave Instabilities in Periodic Structures";
Vortrag: Junior Scientist Conference,
Wien;
16.11.2008
- 18.11.2008.
Zusätzliche Informationen
-
M. Todt, M.A. Hartmann, D. Holec, F. G. Rammerstorfer:
"Accessing the Mechanical Behavior of Carbon Fullerenes by Continuum Shell Models";
Vortrag: 10th World Congress on Computational Mechanics (WCCM 2012),
São Paulo;
08.07.2012
- 13.07.2012.
-
M. Todt, D. Holec, F. G. Rammerstorfer:
"Continuum Mechanical Modeling of Interlayer Defects in Multi-Layered Carbon Nanostructures";
Vortrag: 84th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM),
Novi Sad;
18.03.2013
- 22.03.2013.
-
M. Todt, M. Nagler, A. Wagner, M. Bartosik, P.H. Mayrhofer, H. J. Böhm:
"Simulation of the Thermo-Mechanical Behavior of Multi-Layer Thin Film-Substrate Systems";
Vortrag: IEA AMT Executive Committee Meeting,
Wiener Neustadt;
02.06.2017.
-
M. Todt, F. G. Rammerstorfer, R.D. Bitsche, F.D. Fischer, P.H. Mayrhofer, M.A. Hartmann, D. Holec, O. Paris:
"On the Stability of Carbon Onions";
Vortrag: GAMM 2010 - 81st Annual Meeting of the International Association of Applied Mathematics and Mechanics,
Karlsruhe;
22.03.2010
- 26.03.2010.
Zusätzliche Informationen
-
M. Todt, F. G. Rammerstorfer, O. Paris, F.D. Fischer:
"Mechanical Behavior of Carbon Crystallites Forming Carbon Fibers";
Vortrag: ICCE 19, 19th Annual International Conference on Composites/Nano Engineering,
Shanghai;
24.07.2011
- 30.07.2011.
Zusätzliche Informationen
-
M. Todt, M. Schwab, M. Humer, F. G. Rammerstorfer, H. E. Pettermann:
"Accounting for Transverse Shear in Shell-Based Ply-Level Models of Layered Composites";
Vortrag: 88th Annual Meeting of GAMM,
Ilmenau/Weimar, Germany;
06.03.2017
- 10.03.2017.
-
M. Todt, M. Schwab, M. Humer, F. G. Rammerstorfer, H. E. Pettermann:
"Shell-Based Ply-Level Models of Layered Composites";
Poster: 88th Annual Meeting of GAMM,
Ilmenau/Weimar, Germany;
06.03.2017
- 10.03.2017.
-
M. Todt, M. Schwab, H. E. Pettermann:
"Accounting for Transverse Shear in Stacked-Shell Models of Layered Composite Structures";
Vortrag: 9th European Solid Mecahnics Conference (ESMC 2015),
Madrid;
06.07.2015
- 10.07.2015.
-
M. Todt, R.W. Tomas, T. Koch, H. E. Pettermann:
"Numerical Study of yhe Creep Buckling Response of Laminated Orthotropic Linear Viscoelastic Cylindrical Shells";
Vortrag: 8th ECCOMAS Thematic Conference on the Mechanical Response of Composites,
Göteborg;
22.09.2021
- 24.09.2021.
-
M. Todt, R.W. Tomas, T. Koch, H. E. Pettermann:
"Numerische Vorhersage der linear viskoelastischen Materialeigenschaften von Faserverbundlaminaten";
Vortrag: CU-Forum "CARBON COMPOSITES AUSTRIA" 2019,
Spielberg;
12.11.2019.
-
M. Todt, R.W. Tomas, T. Koch, H. E. Pettermann:
"Simulation of the Mechanical Response of Composite Components Under Consideration of Their Orthotropic Viscoelastic Material Behavior";
Vortrag: 14th World Congress on Computational Mechanics (WCCM 2020, Paris),
Paris;
11.01.2021
- 15.01.2021.
-
M. Todt, F. Toth, M.A. Hartmann, D. Holec, M.J. Cordill, F.D. Fischer, F. G. Rammerstorfer:
"Computational Simulation of Instability Phenomena in Nanoparticles and Nanofilms";
Hauptvortrag: 12th International Conference on Computational Structures Technology (CST2014) and 9th International Conference on Engineering Computational Technology (ECT2014),
Neapel (eingeladen);
02.09.2014
- 05.09.2014.
-
M. Todt, A. Wagner, M. Nagler, M. Bartosik, H. J. Böhm:
"Finite Element Simulation and Analytical Estimation of Eigenstresses in Thin-Film-Substrate Systems";
Vortrag: 89th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM),
München, Germany;
19.03.2018
- 23.03.2018.
-
R.W. Tomas, M. Todt, T. Koch, H. E. Pettermann:
"Numerical prediction of the homogenized orthotropic linear viscoelastic material properties of composite plies and laminated composites";
Vortrag: 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019),
Vienna;
18.02.2019
- 22.02.2019.
Zusätzliche Informationen
-
F. Toth:
"Dynamic Modeling of a Floating Platform in Waves";
Vortrag: 2. ENSYS2030 Science Day,
Wien;
03.12.2012.
-
F. Toth:
"Mechanical Modeling of Large Area Floating Structures Supported by Flexible Air Chambers";
Vortrag: 3. ENSYS 2030 Science Day,
Wien;
30.09.2013.
-
F. Toth, C. Kirchlechner, F.D. Fischer, G. Dehm, F. G. Rammerstorfer:
"Influence of imperfections and friction on the deformation shape of > compressed bi-crystal crystal micropillars";
Vortrag: 2016 EMI International Conference,
Metz;
25.10.2016
- 27.10.2016.
-
F. Toth, F. G. Rammerstorfer:
"Dynamic Modelling of an Offshore Platform Supported by Flexible Air Cushions";
Vortrag: Computational Methods in Marine Engineering MARINE 2013,
Hamburg;
29.05.2013
- 31.05.2013.
-
F. Toth, F. G. Rammerstorfer:
"FSI-Induced Instabilities of Air Chambers in Floating Solar Energy Platforms - Modelling and Experiment";
Hauptvortrag: Vth International Conference on Coupled Problems in Science and Engineering,
Santa Eulària, Ibiza (eingeladen);
17.06.2013
- 19.06.2013.
-
F. Toth, A. Wiesinger, M.J. Cordill, V.M. Marx, F. G. Rammerstorfer:
"Computational Simulation of Cracking and Buckling of Thin Metallic Films on Polymer Substrate under Tensile Loading";
Vortrag: Flex Workshop "Mechanical Issues for Flexible Electronics",
Leoben;
10.04.2014
- 11.04.2014.
-
A. Trubich, C. Bittighofer, R. Kocijan, C. Murschitz, T. Pirker, T. Gross, P.K. Zysset, H. Resch:
"Assessment of Microarchitectural Parameters in Transiliac Bone Biopsies of Females and Males with Fragility Fractures";
Poster: ASBMR 2011 Annual Meeting,
San Diego, CA;
16.09.2011
- 20.09.2011.
-
Z.J. Tsegai, T.L. Kivell, T. Gross, H.N. Nguyen, D. H. Pahr, M.M. Skinner:
"Identifying Behavioural Signals in Trabecular Bone Structure of the Hominoid Third Metacarpal";
Vortrag: European Federation for Primatology Meeting 2013,
Antwerpen;
10.09.2013
- 13.09.2013.
-
Z.J. Tsegai, T.L. Kivell, T. Gross, H.N. Nguyen, D. H. Pahr, M.M. Skinner:
"Trabecular Bone Distribution in the Hominoid Third Metacarpal Head Reflects Predicted Loaded Joint Position";
Poster: 3rd Meeting of the European Society for the Study of Human Evolution,
Wien;
20.09.2013
- 21.09.2013.
-
Z.J. Tsegai, M.M. Skinner, D. H. Pahr, J. Hublin, T.L. Kivell:
"Trabecular Bone Architecture and Distribution in the Talus and Distal Tibia of Homo and Pan";
Poster: 5th Annual ESHE Meeting,
London;
10.09.2015
- 12.09.2015.
-
Z.J. Tsegai, M.M. Skinner, D. H. Pahr, J. Hublin, T.L. Kivell:
"Trabecular bone ontogeny in the forelimb and hindlimb of chimpanzees";
Poster: 8th Annual Meeting of the European Society for the study of Human Evolution (ESHE),
Faro, Portugal;
13.09.2018
- 15.09.2018.
Zusätzliche Informationen
-
P. Varga:
"What Else Can We Compute from HR-pQCT Images?";
Vortrag: Wiener Osteoporose-Forschung von Joseph II. bis heute,
Wien (eingeladen);
24.11.2010.
Zusätzliche Informationen
-
P. Varga, S. Baumbach, D. H. Pahr, P.K. Zysset:
"Anatomy-Specific Finite Element Model of Colle's Fracture";
Poster: Wissenschaftliche Herbsstagung der ÖGEKM,
Wien;
25.10.2008.
Zusätzliche Informationen
-
P. Varga, S. Baumbach, D. H. Pahr, P.K. Zysset:
"Finite Element Models of Human Radius Slices can Accurately Predict Colles' Fracture Load";
Poster: 36th European Symposium on Calcified Tissues,
Wien;
23.05.2009
- 27.05.2009.
Zusätzliche Informationen
-
P. Varga, S. Baumbach, D. H. Pahr, P.K. Zysset:
"Validation of an Anatomy-Specific Finite Element Model of Colle's Fracture";
Poster: 16th Congress of the European Society of Biomechanics,
Luzern;
06.07.2008
- 09.07.2008.
Zusätzliche Informationen
-
P. Varga, E. Dall´Ara, D. H. Pahr, M. Pretterklieber, P.K. Zysset:
"Validation of HR-PQCT Based Finite Element Method on Mechanical Tests of Distal Radius Slices";
Poster: XXII Congress of the International Society of Biomechanics,
Cape Town;
05.07.2009
- 09.07.2009.
Zusätzliche Informationen
-
P. Varga, D. H. Pahr, S. Baumbach, P.K. Zysset:
"Colle's Fracture Load can be Accurately Predicted by Finite Element Models of Ultradistal Sections of the Radius";
Poster: Wissenschaftliche Herbsttagung 2009 der Österreichischen Gesellschaft zur Erforschung des Knochens und des Mineralstoffwechsels,
Wien;
21.11.2009.
Zusätzliche Informationen
-
P. Varga, D. H. Pahr, E. Dall´Ara, S. Baumbach, M. Pretterklieber, P.K. Zysset:
"Calibrated HR-pQCT-Based microFE Models of Ultra-Distal Radius Sections Provide Outstanding Prediction of Experimental Colles' Fracture Load";
Vortrag: ESB2010: 17th Congress of the European Society of Biomechanics,
Edinburgh;
05.07.2010
- 08.07.2010.
Zusätzliche Informationen
-
P. Varga, P. Schefzig, E. Unger, P.K. Zysset, W. Mayr, A. Klostermann, J. Erhart:
"Assessment of Cartilage Contact Forces Acting on the Scaphoid Using a Finite Element Model";
Poster: Wissenschaftliche Herbsttagung der ÖGKM 2010,
Wien;
26.10.2010
- 27.10.2010.
-
P. Varga, P.K. Zysset:
"Comaprison of Mineral Density, Volume Fraction and Fabric Assessed with HR-pQCT and microCT in the Human Distal Radius";
Vortrag: The XIth Congress of the International Society of Bone Morphometry,
Zell am See;
28.05.2009
- 30.05.2009.
Zusätzliche Informationen
-
P. Varga, P.K. Zysset:
"Robustness of Bone Fabric Against Resolution";
Poster: 3. Wiener Biomaterialsymposium,
Wien;
19.11.2008
- 21.11.2008.
Zusätzliche Informationen
-
P. Varga, P.K. Zysset:
"Sampling Sphere Distribution: A Novel Method to Quantify Structural Anisotropy of Trabecular Bone in Unsegmented Images";
Vortrag: MHM 2007: Modelling of Heterogeneous Materials,
Prag;
25.06.2007
- 27.06.2007.
Zusätzliche Informationen
-
P. Varga, P.K. Zysset:
"Sampling Sphere Distribution: A Novel Method to Quantify Structural Anisotropy of Trabecular Bone in Unsegmented Images";
Poster: 9. Jahrestagung der Österreichischen Gesellschaft für Biomedizinische Technik,
Krems;
19.09.2007.
Zusätzliche Informationen
-
A. Wagner, J. Buchinger, M. Todt, D. Holec, P.H. Mayrhofer, M. Bartosik:
"Apparent fracture toughness of TiN coatings with alternating stress fields";
Poster: 46th International Conference on Metallurgical Coatings and Thin Films,
San Diego;
19.05.2019
- 24.05.2019.
Zusätzliche Informationen
-
A. Wagner, D. Holec, M. Todt, P.H. Mayrhofer, M. Bartosik:
"An analytical study on the role of misfit dislocations in fracture toughness enhancement of superlattice coatings";
Vortrag: 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019),
Vienna;
18.02.2019
- 22.02.2019.
Zusätzliche Informationen
-
A. Wagner, D. Holec, M. Todt, P.H. Mayrhofer, M. Bartosik:
"Analytical Modelling of Misfit Dislocation Formation in Superlattice Coatings and its Effect on the Fracture Toughness";
Vortrag: 46th International Conference on Metallurgical Coatings and Thin Films,
San Diego;
19.05.2019
- 24.05.2019.
Zusätzliche Informationen
-
A. Wagner, M. Nagler, M. Bartosik, H. J. Böhm, M. Todt:
"Efficient Numerical And Analytical Modelling Of Residual Stresses In Multilayer Coatings";
Poster: Materials Science and Engineering - MSE 2018,
Darmstadt;
26.09.2018
- 28.09.2018.
-
B. Werner, M. Todt, H. E. Pettermann:
"Nonlinear finite element study of beams with elasto-plastic damage behavior in the post-buckling regime";
Vortrag: 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019),
Vienna;
18.02.2019
- 22.02.2019.
Zusätzliche Informationen
-
G. Wimmer:
"A Semi-Analytical Model for the Simulation of Delamination";
Vortrag: National Institute of Aerospace,
Hampton, VA (eingeladen);
02.08.2007.
Zusätzliche Informationen
-
G. Wimmer:
"An Analytical Fracture Mechanics Based Model for the Simulation of Delamination";
Vortrag: Department of Aeronautics and Astronautics, Stanford University,
Stanford, CA (eingeladen);
21.05.2007.
Zusätzliche Informationen
-
G. Wimmer:
"Computational and Experimental Simulation of Delamination Growth in an L-Shaped Composite Component";
Vortrag: 5th International Conference on Fracture of Polymers, Composites and Adhesives (ESIS TC4),
Les Diablerets;
07.09.2008
- 11.09.2008.
Zusätzliche Informationen
-
G. Wimmer:
"Interlaminare Delamination mit bruchmechanischen Methoden";
Vortrag: AAR-PCCL Seminar "Werkstoffmechanik laminierter Composites: Experiments und Simulation",
Wien;
15.01.2008.
Zusätzliche Informationen
-
G. Wimmer, H. E. Pettermann:
"Computational Methods for the Prediction of Emergence and Growth of Delaminations in Laminated Composite Components";
Vortrag: IUTAM 2012 Symposium on Fracture Phenomena in Nature and Technology,
Brescia;
01.07.2012
- 05.07.2012.
-
G. Wimmer, H. E. Pettermann:
"Numerical Simulation of Progressive Growth of Delaminations with Curved Fronts";
Vortrag: Composites 2009,
London;
01.04.2009
- 03.04.2009.
Zusätzliche Informationen
-
G. Wimmer, H. E. Pettermann, P. Oberhuber:
"A Numerically Efficient Approach for Cooling Stack Design using Orthotropic Shell Elements with Homogenized Effective Properties";
Vortrag: SIMULIA Austria Regional User's Meeting 2014,
Graz;
10.11.2014
- 11.11.2014.
-
G. Wimmer, C. Schuecker, H. E. Pettermann:
"Delamination Growth in a Laminated Composite Component, A Fracture Mechanics Based Method";
Vortrag: Deformation and Fracture of Composites Conference (DFC9),
Sheffield, UK (eingeladen);
11.04.2007
- 13.04.2007.
Zusätzliche Informationen
-
G. Wimmer, C. Schuecker, H. E. Pettermann:
"Numerical Simulation of Onset and Growth of Delamination in Laminated Composites";
Vortrag: Conference on Damage in Composite Materials 2006 (CDCM2006),
Stuttgart;
18.09.2006
- 19.09.2006.
Zusätzliche Informationen
-
G. Wimmer, C. Schuecker, H. E. Pettermann:
"Numerical Simulation of the Damage Process of Fiber Reinforced Aircraft Components";
Poster: Aeronautics Days 2006,
Wien;
19.06.2006
- 21.06.2006.
Zusätzliche Informationen
-
U. Wolfram, T. Gross, H.J. Wilke, P.K. Zysset, D. H. Pahr:
"A Fabric Dependent Tsai-Wu Yield Criterion for Vertebral Trabecular Bone in Strain Space";
Vortrag: 18th Congress of the European Society of Biomechanics (ESB2012),
Lissabon;
01.07.2012
- 04.07.2012.
-
U. Wolfram, J.J. Schwiedrzik, T. Gross, D. H. Pahr, H.J. Wilke, P.K. Zysset:
"A Multiscale Mechanical Approach to Identify Yield Surfaces and Irreversible Properties of Trabecular Bone";
Vortrag: 7th World Congress of Biomechanics (WCB2014),
Boston, MA;
06.07.2014
- 11.07.2014.
-
U. Wolfram, H.J. Wilke, P.K. Zysset:
"Orientation Dependent Elastic Properties of Vertebral Trabecular Bone Matrix Measured Using Microindentation (Effects of Age, Gender and Vertebral Level)";
Vortrag: EuroSpine Annual Meeting 20009,
Warschau;
21.10.2009
- 24.10.2009.
Zusätzliche Informationen
-
U. Wolfram, H.J. Wilke, P.K. Zysset:
"Schädigungsverhalten von Wirbelsäulenspongiosa in Kompression, Zug und Torsion";
Vortrag: EuroSpine 2010,
Wien;
15.09.2010
- 17.09.2010.
Zusätzliche Informationen
-
U. Wolfram, H.J. Wilke, P.K. Zysset:
"The Effect of Rehydration on the Orientation Dependent Elastic Properties of Vertebral Trabecular Bone Matrix, Donor Age, Gender and Vertebral Level as Measured Using Microindentation";
Vortrag: 2010 Annual Meeting of the International Society for the Study of the Lumbar Spine,
Auckland;
13.04.2010
- 17.04.2010.
Zusätzliche Informationen
-
U. Wolfram, H.J. Wilke, P.K. Zysset:
"Transverse Isotropic Properties of Vertebral Trabecular Bone Matrix Measured Using Micro-Indentation: Comparison of Wet and Dry Measurements";
Poster: 36th European Symposium on Calcified Tissues,
Wien;
23.05.2009
- 27.05.2009.
Zusätzliche Informationen
-
U. Wolfram, H.J. Wilke, P.K. Zysset:
"Uniaxial Damage Behaviour of Vertebral Trabecular Bone in Compression, Tension and Torsion";
Vortrag: ESB2010: 17th Congress of the European Society of Biomechanics,
Edinburgh;
05.07.2010
- 08.07.2010.
Zusätzliche Informationen
-
U. Wolfram, H.J. Wilke, P.K. Zysset:
"Valid Finite Element Models of Vertebral Trabecular Bone can be Obtained Using Tissue Measured with Nanoindentation under Wet Conditions";
Poster: 9th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering,
Valencia;
24.02.2010
- 27.02.2010.
Zusätzliche Informationen
-
J. M. Zwar, S. Elgeti, G. Elber:
"Optimization Strategies for CAD-Compliant Microstructure Systems";
Vortrag: The 6th ECCOMAS Young Investigators Conference (YIC2021),
Valencia;
07.07.2021
- 09.07.2021.
-
F. Zwicke, S. Elgeti:
"Numerical Cavity Design for Warpage Compensation in Injection Molding";
Vortrag: The 6th ECCOMAS Young Investigators Conference (YIC2021),
Valencia;
07.07.2021
- 09.07.2021.
-
P.K. Zysset:
"A Climbing Route in Multiscale Mechanics of Bone";
Vortrag: Seminar of the Bioengineering Group, University of Southampton,
Southampton;
14.04.2011.
-
P.K. Zysset:
"A Family of Metric Conjugate Strain-Stress Pairs";
Vortrag: 76th Annual Scientific Conference GAMM 2005,
Luxembourg (eingeladen);
28.03.2005
- 01.04.2005.
-
P.K. Zysset:
"A halfspacewise strength criterion for cancellous bone based on volume fraction and fabric";
Vortrag: 14th Conference of the European Society of Biomechanics,
s'Hertogenbosch (eingeladen);
04.07.2004
- 07.07.2004.
Zusätzliche Informationen
-
P.K. Zysset:
"Architecture based yield and failure criteria for trabecular bone";
Vortrag: IUTAM Symposium on Mechanics of Biological Tissue,
Graz (eingeladen);
27.06.2004
- 02.07.2004.
Zusätzliche Informationen
-
P.K. Zysset:
"Assessment of Microstructure and Fracture Risk Prediction";
Vortrag: Wissenschaftliche Herbsttagung 2009 der Österreichischen Gesellschaft zur Erforschung des Knochens und des Mineralstoffwechsels,
Wien;
21.11.2009.
-
P.K. Zysset:
"Biomechanics of Bone Revisited from the Bench to the Bedside";
Vortrag: KTN SIG2 Meeting in Health Technologies, Meeting No 41: Bone: Disease, Diagnosis & Treatment,
Leeds, UK (eingeladen);
15.10.2007.
-
P.K. Zysset:
"Biomechanics of Bone Revisited from the Bench to the Bedside";
Vortrag: Biomechanics Seminar, Politecnico di Milano,
Milano (eingeladen);
05.06.2008.
-
P.K. Zysset:
"Biomechanics of Bone: From Molecules to Patients";
Hauptvortrag: GAMM-Jahrestagung 2008 (79th Annual Meeting of the Association for Applied Mathematics and Mechanics),
Bremen (eingeladen);
31.03.2008
- 04.04.2008.
-
P.K. Zysset:
"Bone Biomechanics: What Do We Know and What Can We Do?";
Vortrag: Institut für Biomechanik, TU Graz,
Graz (eingeladen);
17.10.2008.
-
P.K. Zysset:
"Bone Mechanics: From Basic Science to Clinical Applications";
Vortrag: 1. Wiener Biomaterialsymposium,
Wien (eingeladen);
04.11.2004
- 05.11.2004.
-
P.K. Zysset:
"Bone Quality: A Biomechanical Perspective";
Vortrag: 16th International Bone Densitometry Workshop,
Annecy (eingeladen);
20.06.2004
- 24.06.2004.
-
P.K. Zysset:
"Der singende Knochen: Ein Duett von Biologie und Mechanik";
Vortrag: Antrittsvorlesung, TU Wien,
Wien;
15.12.2003.
-
P.K. Zysset:
"Finite Element Analysis for Prediction of Bone Strength: State of the Art and Current Applications";
Vortrag: 1st International Symposium of Applied Biomechanics in Musculoskeletal Medicine in Slovakia,
Bratislava (eingeladen);
10.11.2010.
-
P.K. Zysset:
"Finite Element Analysis of Bone Geometry Assessed by μ-CT";
Vortrag: The XIth Congress of the International Society of Bone Morphometry,
Zell am See (eingeladen);
28.05.2009
- 30.05.2009.
-
P.K. Zysset:
"Finite Element Modeling of the Human Vertebral Body: Research and Clinical Approaches";
Vortrag: 9th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering,
Valencia (eingeladen);
24.02.2010
- 27.02.2010.
-
P.K. Zysset:
"Finite Element Modeling of the Human Vertebral Body: Research and Clinical Approaches";
Vortrag: Seminar of the Department of Mechanics, Faculty of Civil Engineering, CTU Prague,
Prag (eingeladen);
04.03.2010.
-
P.K. Zysset:
"Finite Elemente Analyse: Bestimmung der Bruchfestigkeit in vivo - Bevor man sich den Knochen bricht!";
Vortrag: Osteologie 2008,
Hannover (eingeladen);
02.04.2008
- 05.04.2008.
-
P.K. Zysset:
"From CT Data to Finite Element Models: An Integrated Modular Framework";
Vortrag: OTC Modeling Workshop,
Boston, MA (eingeladen);
05.12.2010
- 06.12.2010.
-
P.K. Zysset:
"From Stiffness of Mineralized Collagen Fibrils to the Strength of our Bones: A Climbing Route in Tissue Biomechanics";
Hauptvortrag: 44. DGBMT Jahrestagung / 3-Ländertagung D-A-CH,
Rostock (eingeladen);
05.10.2010
- 08.10.2010.
-
P.K. Zysset:
"Indentation of Bone Extracellular Matrix: Implications for Fracture Risk";
Vortrag: 18. Osteoporoseforum der ÖGEKM,
St. Wolfgang (eingeladen);
29.05.2010.
Zusätzliche Informationen
-
P.K. Zysset:
"Indentation of Bone Tissue";
Vortrag: Third Meeting on Bone Quality,
Abbaye des Vaux de Cernay;
24.06.2008
- 25.06.2008.
-
P.K. Zysset:
"Knochenbiomechanik am ILSB";
Vortrag: Wissenschaftliche Herbsttagung der ÖGKM 2010,
Wien (eingeladen);
26.10.2010
- 27.10.2010.
-
P.K. Zysset:
"Mechanics of Bone Tissue Revisited from Nano to Macro";
Hauptvortrag: 5th World Congress of Biomechanics,
München;
29.07.2006
- 04.08.2006.
-
P.K. Zysset:
"Mechanics of Bone Tissue Revisited from Nano to Macro";
Vortrag: Workshop on Mechanics of Heterogeneous Materials,
Prag;
19.10.2006
- 20.10.2006.
-
P.K. Zysset:
"Morphologisch-mechanische Beziehungen für Spongiosa-Knochen: Von der orthotropen Elastizität zu einem auf Kegeln definierten orthotropen Festigkeitskriterium";
Vortrag: TU Materials Colloquium,
Wien;
16.10.2003.
-
P.K. Zysset:
"Nanoindentation in Bone Tissue: Status and Perspectives";
Vortrag: 16th International Bone Densitometry Workshop,
Annecy (eingeladen);
20.06.2004
- 24.06.2004.
Zusätzliche Informationen
-
P.K. Zysset:
"Patientenspezifische Finite Elemente Meghoden zur Prädiktion der Steifigkeit und Festigkeit von mit PMMA Knochenzement augmentierten Wirbelkörpern";
Vortrag: Wissenschaftliche Sitzung der Gesellschaft der Ärzte in Wien gemeinsam mit dem Research Network Osteology Vienna und der Österreichischen Gesellscahft für Knopchen- und Mineralstoffwechsel,
Wien;
15.06.2011.
-
P.K. Zysset:
"Quantitative Prediction of Bone Strength with Finite Element Analysis";
Vortrag: Osteologie 2011,
Fürth;
24.03.2011
- 26.03.2011.
-
P.K. Zysset:
"The Contribution of Biomechanics to Fracture Risk Assessment";
Vortrag: Wissenschaftliche Herbsttagung 2008 der Österreichischen Gesellschaft zur Erforschung des Knochens und Mineralstoffwechsels,
Wien (eingeladen);
25.10.2008.
-
P.K. Zysset:
"The Contribution of Computed Tomography and Nanoindentation towards Understanding Bone Strength";
Vortrag: Endokrinologie - Osteoporose 2009,
St. Wolfgang (eingeladen);
07.05.2009
- 09.05.2009.
-
P.K. Zysset:
"The Use of Finite Element Analysis to Evaluate Bone Mechanical Properties: Results from the EUROFORS Clinical Trial";
Vortrag: 35th European Symposium on Calcified Tissues,
Barcelona (eingeladen);
24.05.2008
- 28.05.2008.
Zusätzliche Informationen
-
P.K. Zysset, E. Dall´Ara, P. Varga, D. H. Pahr:
"QCT-based Finite Element Analysis Provides the Best Surrogate of In Vitro Bone Strength at the Three Major Osteoporotic Fracture Site";
Vortrag: 7th World Congress of Biomechanics (WCB2014),
Boston, MA;
06.07.2014
- 11.07.2014.
-
P.K. Zysset, D. H. Pahr:
"Fabric-Based Computational Mechanics of Trabecular Bone";
Vortrag: 2nd GAMM Seminar on Continuum Biomechanics,
Freudenstadt-Lauterbad;
22.11.2006
- 24.11.2006.
Zusätzliche Informationen
-
P.K. Zysset, E. Quek, B. Borah, G. Gross, J. Stewart, T. Lang, Y. Chevalier:
""Effects of Teriparatide on Vertebral Body Biomechanics of Postmenopausal Women with Osteoporosis Treated Previously with Alendronate and Risedronate: A QCT-based Finite Element Study";
Vortrag: ASMBR 31st Annual Meeting,
Denver, CO;
11.09.2009
- 15.09.2009.
Zusätzliche Informationen
-
P.K. Zysset, E. Quek, B. Borah, G. Gross, J. Stewart, T. Lang, Y. Chevalier:
"Effects of Teriparatide on Vertebral Body Biomechanics of Postmenopausal Women Treated Previously with Alendronate and Risedronate: A QCT-Based Finite Element Study";
Poster: Iof Wco-Ecceo 10,
Florenz;
05.05.2010
- 08.05.2010.
-
P.K. Zysset, A.G. Reisinger, E. Spiesz, D. H. Pahr, J.J. Schwiedrzik:
"Modeling Scale Transition of Anisotropic Elasticity and Damage in Lamellar Bone";
Vortrag: 7th World Congress of Biomechanics (WCB2014),
Boston, MA;
06.07.2014
- 11.07.2014.
-
P.K. Zysset, L. Rincón-Kohli:
"Conewise Quadratic Yield and Failure Criteria for Trabecular Bone";
Vortrag: 1st GAMM Seminar on Continuum Biomechanics,
Freudenstadt-Lauterbad;
24.11.2004
- 26.11.2004.
Zusätzliche Informationen
-
P.K. Zysset, P. Varga, E. Dall´Ara, T. Gross, D. H. Pahr:
"A Continuum Finite Element Approach to Predict Stiffness and Strength of Human Bones";
Vortrag: 3rd GAMM Seminar on Continuum Biomechanics,
Freudenstadt-Lauterbad;
24.11.2010
- 26.11.2010.
Zusätzliche Informationen
Patente
-
F.D. Fischer, F. G. Rammerstorfer, H. Sattler, G. Gigl:
"Schadens-Akkumulator";
Patent: Österreich,
Nr. 387.464;
eingereicht: 1982,
erteilt: 1983.
Zusätzliche Informationen
-
M. Haider, F. G. Rammerstorfer, H. J. Böhm, C. Diendorfer, F. Toth:
"Anordnung von Schwimmplattformen";
Patent: Österreich,
Nr. A 1027/2011;
eingereicht: 13.07.2011.
Zusätzliche Informationen
-
M. Haider, F. G. Rammerstorfer, H. J. Böhm, C. Diendorfer, F. Toth:
"Schwimmplattform";
Patent: Östereich,
Nr. A 1028/2011;
eingereicht: 13.07.2011.
Zusätzliche Informationen
-
A. Kuhn, G. Schlager, H. J. Böhm:
"Verfahren zur Erstellung einer Beschreibung von komplexen Materialien mittles neuronaler Netze oder verwandter Techniken";
Patent: Österreich,
Nr. PCT/AT/2008000375;
eingereicht: 08.10.2008,
erteilt: 01.06.2010.
Zusätzliche Informationen
Habilitationsschriften
-
H. J. Böhm:
"Einheitszellenanalysen für unidirektional langfaserverstärkte Metallmatrix-Verbundwerkstoffe";
TU Wien, Fakultät für Maschinenbau,
1994.
-
T. Daxner:
"Instabilities Limiting the Capacity of Lightweight Materials and Structures";
Fakultät für Maschinenwesen und Betriebswissenschaften, TU Wien,
2008.
Zusätzliche Informationen
-
D. H. Pahr:
"Computational Multi-Scale Modelling of Synthetic and Natural Composites";
Fakultät für Maschinenwesen und Betriebswissenschaften, TU Wien,
2008.
Zusätzliche Informationen
-
H. E. Pettermann:
"Continuum Mechanics Modeling of Composite Materials";
TU Wien, Fakultät für Maschinenbau,
2003.
-
A. Starlinger:
"Über die Strukturberechnung von Composites-Leichtbaukomponenten";
TU Wien, Fakultät für Maschinenbau,
1999.
-
M. Todt:
"Continuum Mechanics Modeling of Materials";
Technische Universität Wien / Fakultät für Maschinenwesen und Betriebswissenschaften,
2020.
Dissertationen (eigene und begutachtete)
-
W. Auli:
"Statische und dynamische Stabilität von Leichtbaukonstruktionen unter konservativer und nichtkonservativer Belastung";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, H. Troger;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1986.
Zusätzliche Informationen
-
S. Badshah:
"Identification of vibration and elastic properties of aluminium foam using modal testing and analysis";
Betreuer/in(nen), Begutachter/in(nen): J. Wassermann, H. E. Pettermann;
Mechanik und Mechatronik,
2011;
Rigorosum: 29.11.2011.
-
S. Bauer:
"Two-Step Determination of Strength Evolution of Heterogeneous Materials Controlled by Endo- or Exothermal Chemical Reactions";
Betreuer/in(nen), Begutachter/in(nen): R. Lackner, H. J. Böhm;
Institut für Konstruktion und Materialwissenschaften, Universität Innsbruck,
2014;
Rigorosum: 01.07.2014.
-
C. Bilik:
"Lightweight Structural Methods for Increasing the Buckling Load and Fundamental Frequency of Thin-Walled Structures";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, B. Buchmayr;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2011;
Rigorosum: 12.10.2011.
Zusätzliche Informationen
-
R.D. Bitsche:
"Design and Computational Analysis of Compound Castings and other Multi-Material Structures";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, F.D. Fischer;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2009;
Rigorosum: 25.05.2009.
Zusätzliche Informationen
-
H. J. Böhm:
"Computer Based Micromechanical Investigations of the Thermomechanical Behavior of Metal Matrix Composites";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, P. Ettmayer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1991.
Zusätzliche Informationen
-
Q.T. Bui:
"Studies on Modeling the Failure Behavior of Spot Welds";
Betreuer/in(nen), Begutachter/in(nen): H. J. Böhm, B. Pichler;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2009;
Rigorosum: 12.08.2009.
Zusätzliche Informationen
-
T. Ceglar:
"Modelling and simulation concepts for fibre reinforced polymers";
Betreuer/in(nen), Begutachter/in(nen): H. E. Pettermann, M. Todt, C. Schuecker, T. Antretter;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2021;
Rigorosum: 30.04.2021.
-
M. Charlebois:
"A Constitutive Law for Softening and Densification of Trabecular Bone in Compression";
Betreuer/in(nen), Begutachter/in(nen): P.K. Zysset, M. Jirásek;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2008;
Rigorosum: 21.11.2008.
Zusätzliche Informationen
-
Y. Chevalier:
"Computer Tomography-Based Finite Element Analysis of the Human Vertebral Body";
Betreuer/in(nen), Begutachter/in(nen): P.K. Zysset, Ch. Hellmich;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2008;
Rigorosum: 30.09.2008.
Zusätzliche Informationen
-
C.M. Chimani:
"Micro- and Macromechanical Models for Hybrid, Selectively Reinforced Structures";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, H.P. Degischer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1998.
Zusätzliche Informationen
-
E. Dall´Ara:
"QCT Based Finite Element Models of the Human Vertebra and Femur: Validation with Experiments and Comparison with Bone Densitometry";
Betreuer/in(nen), Begutachter/in(nen): D. H. Pahr, P.K. Zysset, Z. Yoshibash;
Institut für Leichtbau und Struktur-Biomechanik,
2012;
Rigorosum: 29.10.2012.
Zusätzliche Informationen
-
B. Daum:
"Elastoplastic Instabilties of Lamellar Structures";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, F.D. Fischer;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2015;
Rigorosum: 20.08.2015.
Zusätzliche Informationen
-
T. Daxner:
"Multi-Scale Modeling and Simulation of Metallic Foams";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, H.P. Degischer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2002.
Zusätzliche Informationen
-
H.E. Dechant:
"Mechanical Properties and Finite Element Simulation of Spider Tactile Hairs";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, F.G. Barth;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2001.
Zusätzliche Informationen
-
C. Diendorfer:
"System Design and Analysis of Floating Solar Power Plants";
Betreuer/in(nen), Begutachter/in(nen): M. Haider, F. Rammerstorfer;
Institut für Energietechnik und Thermodynamik,
2014;
Rigorosum: 25.06.2014.
-
K. Dorninger:
"Entwicklung von nichtlinearen FE-Algorithmen zur Berechnung von Schalenkonstruktionen aus Faserverbundstoffen";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, H. Troger;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1989.
Zusätzliche Informationen
-
T. Drabek:
"Modeling of Matrix Damage in Particle Reinforced Ductile Matrix Composites";
Betreuer/in(nen), Begutachter/in(nen): H. J. Böhm, H.P. Degischer;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2005.
Zusätzliche Informationen
-
D. Duschlbauer:
"Computational Simulation of the Thermal Conductivity of MMCs under Consideration of the Inclusion-Matrix Interface";
Betreuer/in(nen), Begutachter/in(nen): H. J. Böhm, H.P. Degischer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2003.
Zusätzliche Informationen
-
A. Eckschlager:
"Simulation of Particle Failure in Particle Reinforced Ductile Matrix Composites";
Betreuer/in(nen), Begutachter/in(nen): H. J. Böhm, H.P. Degischer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2002.
Zusätzliche Informationen
-
S. Eisner:
"An extension to Nitsche-type mortaring for non-conforming finite elements";
Betreuer/in(nen), Begutachter/in(nen): M. Kaltenbacher, H. E. Pettermann;
Mechanik und Mechatronik,
2016;
Rigorosum: 06.07.2016.
-
M.I. El Ghezal:
"Contribution to the Nonlinear Micromechanical Modeling of Composite and Porous Materials under Small and Large Deformations";
Betreuer/in(nen), Begutachter/in(nen): I. Doghri, L. Delannay, T. Pardoen, D. Kondo, H. J. Böhm, K. Danas;
Institute of Mechanics, Materials and Civil Engineering, UC Louvain,
2017;
Rigorosum: 18.12.2017.
-
S. Estermann:
"Replicating Liver Tissue in Terms of Mechanical Properties for Anatomical Models";
Betreuer/in(nen), Begutachter/in(nen): D. Pahr, A.G. Reisinger, St. Scheiner, S. Avril;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2021;
Rigorosum: 21.09.2021.
-
T. Flatscher:
"A Constitutive Model for the Elasto-Plasto-Damage Ply Behavior in Laminated FRP Composites: Its Development, Implementation, and Application in FEM Simulations";
Betreuer/in(nen), Begutachter/in(nen): H. E. Pettermann, G. Pinter;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2010;
Rigorosum: 30.03.2010.
Zusätzliche Informationen
-
M. Frank:
"Mechanical Characterization of Individual Trabeculae";
Betreuer/in(nen), Begutachter/in(nen): P.J. Thurner, D. H. Pahr;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2021.
-
N. Friedl:
"Membrantragflächen in instationärer Potentialströmung";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, P. Gittler;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2002.
Zusätzliche Informationen
-
J. Gager:
"Modeling and Simulation Concepts for Advanced Braided Composites";
Betreuer/in(nen), Begutachter/in(nen): H. E. Pettermann, G. Pinter;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2013;
Rigorosum: 08.11.2013.
Zusätzliche Informationen
-
C. Grohs:
"Study of Effects of Weld Seams in Finite Element Crash Simulations";
Betreuer/in(nen), Begutachter/in(nen): H. J. Böhm, J. Eberhardsteiner;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2008;
Rigorosum: 17.09.2008.
Zusätzliche Informationen
-
T. Gross:
"Development and Application of 3D CT Image-Based Micro and Macro Finite Element Models for Human Bones and Orthopedic Implant Systems";
Betreuer/in(nen), Begutachter/in(nen): D. H. Pahr, Harry van Lenthe;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2014;
Rigorosum: 29.04.2014.
Zusätzliche Informationen
-
F. Harewood:
"Micro and Macromechanical Modelling of Cardiovascular Stents in Realistic Arterial Geometries";
Betreuer/in(nen), Begutachter/in(nen): P.E.M. McHugh, H. J. Böhm;
National University of Ireland, Galway,
2006;
Rigorosum: 11.12.2006.
-
S. Hartl:
"Analysis of fiber reinforced filament wound rotors";
Betreuer/in(nen), Begutachter/in(nen): M. Kaltenbacher, I.C. Skrna-Jakl;
Mechanik und Mechatronik,
2016;
Rigorosum: 09.06.2016.
-
J. Helmig:
"Boundary-Conforming Finite Element Methods for Complex Rotating Domains";
Betreuer/in(nen), Begutachter/in(nen): S. Elgeti, M. Behr, M. Möller;
RWTH Aachen University,
2021;
Rigorosum: 03.09.2021.
-
B. Hößl:
"Mechanical Simulation of Slit Sensors of Arachnids";
Betreuer/in(nen), Begutachter/in(nen): H. J. Böhm, F.G. Barth;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2007;
Rigorosum: 20.04.2007.
Zusätzliche Informationen
-
C.O. Huber:
"Numerical Simulations of Metal Matrix Composites - Tribological Behavior and Finite Strain Response on Different Length Scales";
Betreuer/in(nen), Begutachter/in(nen): H. E. Pettermann, T. Antretter;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2008;
Rigorosum: 21.02.2008.
Zusätzliche Informationen
-
M.M. Jan:
"Application of Damage Tolerant Design in Mechanical Engineering";
Betreuer/in(nen), Begutachter/in(nen): W. Eichlseder, H. E. Pettermann;
Montanuniversität Leoben,
2008;
Rigorosum: 28.11.2008.
-
J. Kaul:
"A constitutive model for fiber reinforced plies - Anisotropic evolution of damage and plasticity";
Betreuer/in(nen), Begutachter/in(nen): H. E. Pettermann, C. Schuecker, T. Antretter;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2020;
Rigorosum: 28.08.2020.
-
F. Key:
"Advanced Full- and Reduced-Order Simulations as Digital Tools in Production Engineering";
Betreuer/in(nen), Begutachter/in(nen): S. Elgeti, M. Behr, G. Rozza;
RWTH Aachen University,
2021;
Rigorosum: 09.09.2021.
-
M. Kinzl:
"Development of a Patient-Specific Finite Element Model for Augmented Vertebral Bodies";
Betreuer/in(nen), Begutachter/in(nen): D. H. Pahr, S.J. Ferguson;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2012;
Rigorosum: 06.09.2012.
Zusätzliche Informationen
-
A. Kirchebner:
"Numerische Modellierung von Schneidvorgängen mittels FE-Methode";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, B. Buchmayr;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2003.
Zusätzliche Informationen
-
W. Krach:
"Finite Element Based Investigation of Stress Fields and Bone Remodeling in and around Uncemented Tibial Prostheses";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, P. Lugner;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1997.
Zusätzliche Informationen
-
T. Krassnitzer:
"Mechanical and Fracture Mechanical Investigations of Neat and filled Epoxy Resins (Mechanischen und bruchmechanischen Untersuchungen an reinen und gefüllten Epoxid-Harzen)";
Betreuer/in(nen), Begutachter/in(nen): E. Tschegg, Franz Rammerstorfer;
Institut für Hochbau und Technologie,
2012;
Rigorosum: 2012.
-
G. Kravchenko:
"Numerical Simulations of Fatigue Crack Problems in Semiconductor Devices Subjected to Thermomechanical Loading";
Betreuer/in(nen), Begutachter/in(nen): H. E. Pettermann, M. Kaltenbacher;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2014;
Rigorosum: 27.11.2014.
Zusätzliche Informationen
-
J. Kronsteiner:
"Advanced Numerical Methods and Mesh Manipulation Strategies for Large Deformation Processes";
Betreuer/in(nen), Begutachter/in(nen): K. Zeman, H. J. Böhm, H Irschik;
JKU Linz,
2020;
Rigorosum: 29.01.2020.
-
A. Lipka:
"Verbesserter Materialeinsatz innovativer Werkstoffe durch die Topologie-Optimierung";
Betreuer/in(nen), Begutachter/in(nen): E. Ramm, F. G. Rammerstorfer;
Universität Stuttgart,
2006.
-
M.H. Luxner:
"Modeling and Simualtion of Highly Porous Open Cell Structures - Elasto Plasticity and Localization versus Disorder and Defects";
Betreuer/in(nen), Begutachter/in(nen): H. E. Pettermann, J. Stampfl;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2006.
Zusätzliche Informationen
-
A. K. Machinek:
"Anwendung der Verzweigungstheorie auf das Beulen und Nachbeulverhalten von Kreisring- und Rechteckplatten";
Betreuer/in(nen), Begutachter/in(nen): H. Troger, F. G. Rammerstorfer;
Institut für Mechanik, TU Wien,
1986.
Zusätzliche Informationen
-
A.Y. Matveeva:
"Structure-Property Relationships in Polymer Nanocomposites";
Betreuer/in(nen), Begutachter/in(nen): F.W.J. van Hattum, L. Gorbatikh, H. J. Böhm;
Universidade do Minho,
2015;
Rigorosum: 08.05.2015.
Zusätzliche Informationen
-
C. Messner:
"Thermal and Mechanical Loading of Duplex Steels";
Betreuer/in(nen), Begutachter/in(nen): E.A. Werner, F. G. Rammerstorfer;
TU München,
2004.
-
P. Métrailler:
"Système robotique pour la mobilisation des membres inférieurs d'une personne paraplégique";
Betreuer/in(nen), Begutachter/in(nen): R. Clavel, P.K. Zysset;
Ecole Polytechnique Fédérale de Lausanne,
2005;
Rigorosum: 31.01.2005.
-
V. Motsch:
"Micro- and Nanostructured Surfaces for Studying T Cell Activation";
Betreuer/in(nen), Begutachter/in(nen): G. Schütz, E. Sevcsik, S. Springer, P.J. Thurner;
Institut für Angewandte Physik (E134),
2019;
Rigorosum: 11.06.2019.
-
H. Moussaddy:
"A New Definition of the Representative Volume Element in Numerical Homogenization Problems and its Application to the Performance Evaluation of Analytical Homogenization Models";
Betreuer/in(nen), Begutachter/in(nen): M. Lèvesque, D. Therriault, H. J. Böhm;
École Polytechnique de Montréal,
2013.
-
M. Muller:
"Evaluation ultrasonore de l'os cortical par des méthodes d'acoustique non-linéaire. Application à l'évaluation de micro-endommagement osseux";
Betreuer/in(nen), Begutachter/in(nen): P. Laugier, P.K. Zysset;
Université Paris 7,
2006;
Rigorosum: 13.11.2006.
-
S. Nogales:
"Numerical Simulation of the Thermal and Thermomechanical Behavior of Metal Matrix Composites";
Betreuer/in(nen), Begutachter/in(nen): H. J. Böhm, H. Bolt;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2008;
Rigorosum: 24.07.2008.
Zusätzliche Informationen
-
D. H. Pahr:
"Experimental and Numerical Investigations of Perforated FRP-Laminates";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, S. Seidler;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2003.
Zusätzliche Informationen
-
M. Pastrama:
"Mechanobiological Origins of Bone Porosity and Elasticity: An Experimental and Computational Multiscale Approach";
Betreuer/in(nen), Begutachter/in(nen): Ch. Hellmich, P.J. Thurner, H. Van Oosterwyck;
Institut für Mechanik der Werkstoffe und Strukturen,
2016;
Rigorosum: 22.11.2016.
-
H.-J. Payer:
"Optimierung von FE- und RE-Analysen unter Berücksichtigung der Verwendung eines Vektorrechners";
Betreuer/in(nen), Begutachter/in(nen): H.A. Mang, F. G. Rammerstorfer;
Institute for Strength of Materials, Vienna University of Technology,
1995.
Zusätzliche Informationen
-
T. Pélisset:
"Degradation Analysis of Thin Die-Attach Layer under Cyclic Thermal Load in Microelectronics Packaging";
Betreuer/in(nen), Begutachter/in(nen): T. Antretter, H. E. Pettermann;
Institut für Mechanik, Montanuniversität Leoben,
2015;
Rigorosum: 15.06.2015.
-
H. E. Pettermann:
"Derivation and Finite Element Implementation of Constitutive Material Laws for Multiphase Composites Based on Mori-Tanaka Approaches";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, H.P. Degischer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1997.
Zusätzliche Informationen
-
A.F. Plankensteiner:
"Multiscale Treatment of Heterogeneous Nonlinear Solids and Structures";
Betreuer/in(nen), Begutachter/in(nen): H. J. Böhm, H.P. Degischer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1997.
Zusätzliche Informationen
-
M. Pleschberger:
"Integrated 3/D CT-FE Modeling System for Stress Analysis of the Human Mandible";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, C.W. Ulm;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1999.
Zusätzliche Informationen
-
N.L. Praxmarer:
"Simulation of the Plantar Pressure Distribution for Insole Design";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, P. Lugner;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1996.
Zusätzliche Informationen
-
H.L. Quang:
"Microstructures solubles et relations exactes en micromécanique";
Betreuer/in(nen), Begutachter/in(nen): Q.C. He, P.K. Zysset;
Université de Marne la Vallée,
2005;
Rigorosum: 01.12.2005.
-
A. Rasool:
"Improved Multi-Particle Unit Cell Models for Studying Particle Reinforced Composites";
Betreuer/in(nen), Begutachter/in(nen): H. J. Böhm, T. Antretter;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2011;
Rigorosum: 26.05.2011.
Zusätzliche Informationen
-
A.G. Reisinger:
"Modeling and Validation of Multiscale Lamellar Bone Elasticity";
Betreuer/in(nen), Begutachter/in(nen): D. H. Pahr, K. Raum;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2011;
Rigorosum: 10.11.2011.
Zusätzliche Informationen
-
T.J. Reiter:
"Functional Adaptation of Bone and Application in Optimal Structural Design";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, H. Troger;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1995.
Zusätzliche Informationen
-
H. Renezeder:
"On the dynamics of an axially moving cable with application to ropeways";
Betreuer/in(nen), Begutachter/in(nen): A. Steindl, F. G. Rammerstorfer;
Institut für Mechanik und Mechatronik, TU Wien,
2006;
Rigorosum: 21.02.2006.
Zusätzliche Informationen
-
H. Rezvani-Naraghi:
"Investigation of the Structural Behaviour of the CERN CMS Elecromagnetic Calorimeter Barrel Mechanical Support: Analysis and Systematic Studies";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, H. Troger;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2001.
Zusätzliche Informationen
-
R. Riegler:
"Methodik zur Auslegung von gewickelten Rotoren für permanenterregte Axialflussmaschinen";
Betreuer/in(nen), Begutachter/in(nen): M. Grafinger, H. E. Pettermann, M. Leitner;
Inst. für Konstruktionwissenschaften und Produktentwicklung,
2021;
Rigorosum: 07.07.2021.
Zusätzliche Informationen
-
K. Scharf:
"Beiträge zur Erfassung des Verhaltens von erdbebenerregten, oberirdischen Tankbauwerken";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, H. Troger;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1989.
Zusätzliche Informationen
-
J. Scheidl:
"Mixed kinematic modelling and simulation of slack belt drives using structural theories of rods and shells";
Betreuer/in(nen), Begutachter/in(nen): Y. Vetyukov, M. Krommer, H. E. Pettermann;
Institut für Mechanik und Mechatronik,
2021;
Rigorosum: 15.09.2021.
Zusätzliche Informationen
-
L. Schrangl:
"Quantifying conformational dynamics of biomolecules via single-molecule FRET";
Betreuer/in(nen), Begutachter/in(nen): G. Schütz, C. Seidel, P.J. Thurner;
Institut für Angewandte Physik (IAP),
2020;
Rigorosum: 06.08.2020.
-
C. Schuecker:
"Mechanism Based Modeling of Damage and Failure in Fiber Reinforced Polymer Laminates";
Betreuer/in(nen), Begutachter/in(nen): H. E. Pettermann, S. Seidler;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2005.
Zusätzliche Informationen
-
M. Schwab:
"Modelling and Simulation of the Impact Behaviour of Fibre Reinforced Laminates and Components";
Betreuer/in(nen), Begutachter/in(nen): H. E. Pettermann, C. Schuecker, T. Antretter;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2016.
Zusätzliche Informationen
-
M. Schwarzbart:
"Beulanalyse einer gebetteten Kreisplatte mit nicht-Euklidischer Metrik";
Betreuer/in(nen), Begutachter/in(nen): A. Steindl, F. G. Rammerstorfer;
Institut für Mechanik und Mechatronik,
2013;
Rigorosum: 18.01.2013.
Zusätzliche Informationen
-
M. Seitzberger:
"Contributions to an Efficient Numerical Analysis of the Plastic Collapse Behaviour of Thin-Walled Structures";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, H. Troger;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1999.
Zusätzliche Informationen
-
K. Shaposhnikov:
"Finite-Elemente-Simulation piezoelektrischer akustischer Oberflächenwellen-Sensoren";
Betreuer/in(nen), Begutachter/in(nen): M. Kaltenbacher, F. Rammerstorfer;
Mechanik und Mechatronik,
2015;
Rigorosum: 21.12.2015.
-
I.C. Skrna-Jakl:
"Numerical and Experimental Investigations of Interlaminar Stresses and Free Edge Effects in Integrally Stiffened, Layered Composite Panels";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, H. Troger;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1994.
Zusätzliche Informationen
-
G. Sommer:
"Mechanical Properties of Healthy and Diseased Human Arteries and Related Material Modeling";
Betreuer/in(nen), Begutachter/in(nen): G. Holzapfel, P.K. Zysset;
TU Graz,
2008;
Rigorosum: 17.10.2008.
-
E. Spiesz:
"Experimental and Computational Micromechanics of Mineralized Tendon and Bone";
Betreuer/in(nen), Begutachter/in(nen): P.K. Zysset, P. Fratzl;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2011;
Rigorosum: 17.10.2011.
Zusätzliche Informationen
-
M. Springer:
"Modeling and Simulation of Fatigue Damage in Power Semiconductors";
Betreuer/in(nen), Begutachter/in(nen): H. E. Pettermann, A. Turon, H.P. Gänser;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2017;
Rigorosum: 14.12.2017.
Zusätzliche Informationen
-
A. Starlinger:
"Development of Efficient Finite Shell Elements for the Analysis of Sandwich Structures under Large Deformations and Global as well as Local Instabilities";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, H. Troger;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1990.
Zusätzliche Informationen
-
M. Stauber:
"Volumetric Spatial Decomposition of Porous Microstructures";
Betreuer/in(nen), Begutachter/in(nen): R. Müller, P.K. Zysset;
ETH Zürich,
2005;
Rigorosum: 31.08.2005.
-
M.A. Stiftinger:
"Semi-Analytical Finite Element Formulations for Layered Shells with Consideration of Edge Effects";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, H. Troger;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1996.
Zusätzliche Informationen
-
M. Stipsitz:
"Development of a nonlinear micro Finite Element framework for image-based simulations in bone biomechanics";
Betreuer/in(nen), Begutachter/in(nen): D. Pahr, B. van Rietbergen, Harry van Lenthe;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2020;
Rigorosum: 25.02.2020.
-
A.J. Svobodnik:
"Numerical Treatment of the Elastic-Plastic Macromechanical Behavior of Longfiber-Reinforced Metal Matrix Composites";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, H. Troger;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1990.
Zusätzliche Informationen
-
A. Synek:
"Predicting habitual activities from bone architecture using a biomechanical approach";
Betreuer/in(nen), Begutachter/in(nen): D. H. Pahr, M.O. Heller, MG Pandy;
Institute of Lightweight Design and Structural Biomechanics, TU Wien,
2018;
Rigorosum: 23.10.2018.
-
M. Todt:
"Continuum Shell Models for Multi-Layer Carbon Nanostructures";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, O. Paris;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2012;
Rigorosum: 20.12.2012.
Zusätzliche Informationen
-
F. Toth:
"Static and Dynamic Modelling of Lightweight Floating Platforms Supported by Flexible Air Chambers";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, M. Haider;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2014;
Rigorosum: 01.07.2014.
Zusätzliche Informationen
-
V. Tran:
"Berechnung der Ruderkräfte in flachem Wasser";
Betreuer/in(nen), Begutachter/in(nen): A. Kluwick, F. G. Rammerstorfer;
Institut für Strömungslehre und Wärmeübertragung,
1991.
Zusätzliche Informationen
-
R. Traxl:
"Continuum Micromechanics-Based Determination of Effective Properties of Elastoplastic Matrix-Inclusion Materials: Application within the Finite Element Analysis of Indentation and Impact Problems";
Betreuer/in(nen), Begutachter/in(nen): R. Lackner, H. J. Böhm;
Institut für Konstruktion und Materialwissenschaften, Universität Innsbruck,
2016;
Rigorosum: 15.09.2016.
Zusätzliche Informationen
-
S. Ucsnik:
"Development, Experimental and Numerical Investigations of a Novel Metal to Composite Joint Technology";
Betreuer/in(nen), Begutachter/in(nen): D. H. Pahr, G. Pinter;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2013.
Zusätzliche Informationen
-
P. Varga:
"Prediction of Distral Radius Fracture Load Using HR-pQCT-Based Finite Element Analysis";
Betreuer/in(nen), Begutachter/in(nen): P.K. Zysset, Harry van Lenthe;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2009;
Rigorosum: 11.10.2009.
Zusätzliche Informationen
-
W.K. Vonach:
"A General Solution to the Wrinkling Problem of Sandwiches";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, H. Troger;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2001.
Zusätzliche Informationen
-
X. Wang:
"Finite Strip Formulations for Strength, Buckling and Post-Buckling Analysis of Stiffened Plates";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, H. Troger;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1994.
Zusätzliche Informationen
-
E. Weissenbek:
"Finite Element Modelling of Discontinuously Reinforced Metal Matrix Composites";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, H. Straube;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1994.
Zusätzliche Informationen
-
G. Wimmer:
"Computational Methods for the Prediction of Emergence and Growth of Delaminations in Laminated Composite Components";
Betreuer/in(nen), Begutachter/in(nen): H. E. Pettermann, O. Kolednik;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2009;
Rigorosum: 28.01.2009.
Zusätzliche Informationen
-
K. Zimnik:
"Interface of steel inserts in Al-Si alloy castings";
Betreuer/in(nen), Begutachter/in(nen): H.P. Degischer, F. G. Rammerstorfer;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2011;
Rigorosum: 06.07.2011.
Diplom- und Master-Arbeiten (eigene und betreute)
-
A. Ableidinger:
"Some Aspects of the Fracture Behavior of Metal Foams";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2000.
-
S. Aigner:
"Berechnung, Bewertung und Dimensionierung eines LKW-Bauteils aus faserverstärkten Kunststoffen";
Betreuer/in(nen): H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2015;
Abschlussprüfung: 30.09.2015.
-
M. Albrecht:
"Entwicklung eines Finite-Elemente-Programms zur Simulation der Biegeschwingungen von Lamellenventilen";
Betreuer/in(nen): T. Daxner;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2004.
-
N Amraish:
"Collagen Fibril Orientation and Modulus Mapping of Osteonal Cortical Human Bone";
Betreuer/in(nen): P.J. Thurner, O.G. Andriotis;
Institut für Leichtbau und Struktur-Biomechanik,
2018;
Abschlussprüfung: 27.02.2018.
-
A. Angerbauer:
"Konzeption einer wärmedämmenden Türe für eine Waffelmaschine";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1992.
-
T. Antretter:
"Optimierung eines Biegegelenkes";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1993.
-
H. Aschauer:
"Einfluß der Schiffsbreite auf die notwendige Antriebsleistung";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1991.
-
J.W. Auersperg-Breunner:
"3D Untersuchung einer Einheitszelle eines kurzfaserverstärkten Al-Composites";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1993.
-
R. Auli:
"Einfluß von Steifigkeits- und Krümmungsverlauf über die Schilänge auf die Schilaufeigenschaften repräsentiert durch die Flächendruckverteilung";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1985.
-
K. Aumayr:
"Eignung der expliziten dynamischen Finite Elemente Methode (MSC/DYNA) zur Simulation von Blechumformprozessen";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1990.
-
S. Bachmann:
"Age, Sex and Treatment Related Changes of Bone Mineral Density Based on CT Data";
Betreuer/in(nen): D. Pahr;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2018;
Abschlussprüfung: 25.10.2018.
-
A. Bakonyi:
"Analysis of reconstituted and native collagen fibrils modified by mineralization";
Betreuer/in(nen): P.J. Thurner, A. Rohatschek;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2020;
Abschlussprüfung: 21.11.2020.
-
M. Barak:
"Morphologie-Elastizitätsbeziehungen des spongiösen Knochens bis zur vierten Ordnung";
Betreuer/in(nen): P.K. Zysset, D. H. Pahr;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2006.
-
F. Barborik:
"Dynamische FE-Analyse von gelenkig verbundenen Bauteilgruppen";
Betreuer/in(nen): H. J. Böhm, T. Daxner;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2005.
Zusätzliche Informationen
-
A. Bartolomé Chavert:
"Unit Cell Based Evaluation of Strain Energy Densities Caused by the Transformation of a Matrix into Two Families of Inhomogeneous Inclusions";
Betreuer/in(nen): H. J. Böhm;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien; Universidade de Vigo,
2011.
Zusätzliche Informationen
-
M. Bauer:
"Gestaltoptimierung einer LKW-Hinterradnabe";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1988.
-
S. Bauer:
"Analytische Behandlung des Rohrendproblems bei der Autofrettage von Rohren";
Betreuer/in(nen): F. Rammerstorfer;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien, 2017,
2017.
-
A. Bellés Meseguer:
"Numerical Simulations of the Crack Behavior of Brittle Cellular Materials";
Betreuer/in(nen): H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2015;
Abschlussprüfung: 26.03.2015.
Zusätzliche Informationen
-
H. Benito Campos:
"Inhomogeneities in Matrices with Grain Structure";
Betreuer/in(nen): H. J. Böhm;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien; Universidade de Vigo,
2014.
Zusätzliche Informationen
-
P. Bentz:
"Numerische Beulanalyse von axial gedrückten Kreiszylinderschalen mit nicht-rotationssymmetrischen Imperfektionen unter nicht-rotationssymmetrischer Axiallast";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1990.
-
L. Berger:
"Comparison of Subchondral Bone Stresses with Physiological and Simplified Articular Loading of the Radiocarpal Joint Using Finite Element Analysis";
Betreuer/in(nen): D. H. Pahr, A. Synek;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2021.
-
K.-M. Biebrich:
"Das mechanische Verhalten von einfachen und komplexen FDM-gedruckten Modellen menschlicher Femora";
Betreuer/in(nen): D. H. Pahr;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2021.
-
B. Bieringer:
"Entwicklung und Erprobung eines Meßgerätes zum Messen von Schub und Leistung am Modellquerstrahlpropeller";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1996.
-
W. Billinger:
"Stabilitätsverlust flüssigkeitsgefüllter Zylinderschalen durch Kippen der Unterlage";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1986.
-
M. Bina:
"Extension of a Parallel Nonlinear Finite Element Simulation Software for Human Bone";
Betreuer/in(nen): D. H. Pahr;
Institut für Leichtbau und Struktur-Biomechanik,
2013.
Zusätzliche Informationen
-
M. Binder:
"Formoptimierung mittels Reinforcement Learning";
Betreuer/in(nen): S. Elgeti;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2021.
-
B. Birklhuber:
"Festigkeitsberechnung eines Schubleichters für das Rhein-Main-Donaugebiet mit der Möglichkeit vier mal vier Container im Laderaumquerschnitt zu stapeln";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1990.
-
R.D. Bitsche:
"Space Filling Polyhedra as Mechanical Models for Solidified Dry Foams";
Betreuer/in(nen): T. Daxner, H. J. Böhm;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2005.
Zusätzliche Informationen
-
V. Björklund:
"Simulation of Delamination Migration in Laminated Composite Structures";
Betreuer/in(nen): R. Denzer, H. E. Pettermann, J. Kaul;
Division of Solid Mechanics, Lund University,
2018.
Zusätzliche Informationen
-
A. Blum:
"Finite Element Simulation of Uniaxial Periodic Structures";
Betreuer/in(nen): H. E. Pettermann, M. Schwab;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2015;
Abschlussprüfung: 30.09.2015.
Zusätzliche Informationen
-
H. Böhm:
"Wasserdichte Seitenlängsschotte auf dem Fahrzeugdeck zur Erhöhung der Sicherheit auf Roll On/Roll Off-Fährschiffen";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1997.
-
B. Boyano Largo:
"Parameter Effects in Linear Embedding Analysis";
Betreuer/in(nen): H. J. Böhm;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2015.
Zusätzliche Informationen
-
J. Broger:
"Adaptation of an Elasto-Plasto-Damage Model from ABAQUS/Standard to ABAQUS/Explicit and its Application to Laminated FRP";
Betreuer/in(nen): H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2014;
Abschlussprüfung: 26.02.2014.
Zusätzliche Informationen
-
M. Bruckmüller:
"Erstellung eines FORTRAN-Programmes zur Berechnung von konsistenten Verschiebungen im Zuge von FE-Submodellanalysen";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1995.
-
P. Casagrande:
"Entwicklung einer Auswerteroutine zur Evaluation der Ermüdungsbeanspruchung von Komponenten auf Basis von Hauptnormalspannungen";
Betreuer/in(nen): H. J. Böhm, A. Starlinger;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2005.
Zusätzliche Informationen
-
M. Cech:
"FE-Simulation der mechanischen Beanspruchungen am Verbrennungskraftmotor - Segmentmodell versus Gesamtmotormodell";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2004.
-
T. Ceglar:
"Finite Element Method Simulations of the Delamination in Laminated Composite Structures";
Betreuer/in(nen): H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2017.
Zusätzliche Informationen
-
W.F. Cepak:
"Entwicklung eines Rechenprogrammes zur Ermittlung beulkritischer thermomechanischer Belastungen von Rechteckplatten mittels der Finite-Streifen-Methode";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1987.
-
A. Chamadoira:
"Unit Cell Studies of Unidirectional and Cross-Ply Long Fiber Reinforced MMC";
Betreuer/in(nen): H. J. Böhm;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien; Universidade de Vigo,
2007.
Zusätzliche Informationen
-
H. Dannbauer:
"Entwicklung eines linearen Finite-Elemente-Programms einschließlich Pre- und Postprocessings unter Ausnutzung der GEM-Benutzeroberfläche eines ATARI ST";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1989.
-
H.E. Dechant:
"Spannungs-, Deformations- und Stabilitätsverhalten von Hochrad-Laufrädern";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1997.
-
G. Decker:
"Structural Design of a Miniaturised Bi-Propellant Thruster for the Attitude Control of Satellites";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2011;
Abschlussprüfung: 07.11.2011.
Zusätzliche Informationen
-
S. Desissaire:
"The Effect of Osmotic Pressure on the Mechanical and Structural Properties of Individual Collagen Fibrils";
Betreuer/in(nen): P.J. Thurner, O.G. Andriotis;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2016.
Zusätzliche Informationen
-
C. Döller:
"Deformationsanalyse des Überrollens von Sandwichplatten in Luftfrachtcontainern";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1995.
-
B. Dohnál:
"Entwicklung alternativer Profilquerschnitte für Dachlangträger;";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2015;
Abschlussprüfung: 17.06.2015.
-
H.R. Dorfi:
"A Laminated Curved Beam Finite Element Based on the Hybrid Mixed Formulation";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1990.
-
Ch. Ehrenberger:
"Investigation of relaxation behaviour of individual collagen fibrils through AFM nanoindentation";
Betreuer/in(nen): P.J. Thurner, M. Nalbach;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2020;
Abschlussprüfung: 12.10.2020.
-
N. Eisenköck:
"Auslegung und Berechnung von Arbeitsfedern für Federmotoren";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1994.
-
K. Erlacher:
"Berechnung der Dennebaumatmung der Schubleichter Type 1280";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1985.
-
A. Ettl:
"Entwicklung von Algorithmen zur automatisierten Lebensdaueranalyse in Verbindung mit Finite-Elemente-Berechungen";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1991.
-
S. Faghfouri:
"FE- Studien zum Beul- und Nachbeulverhalten von Scheiben und Bändern unter Zug-und Torsion";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2020;
Abschlussprüfung: 10/2020.
-
A. Faltl:
"Entwicklung eines Pre- und Postprocessors für das Schiffsentwurfsprogramm "Archimedes"";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1992.
-
R. Feller:
"Simulation und Berechnung der Schadstoffemissionen der zivilen Luftfahrt in Österreich";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1993.
-
C. Fernandez Soneira:
"Finite Element Investigations of Aeroelastic Phenomena of the ILFB-NIKWING";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2002.
-
G. Fichtinger:
"Die Berechnung des Dachdrückversuchs mit ABAQUS/EXPLICIT";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2000.
-
G. Firmberger:
"Beul- und Nachbeulverhalten von zugbeanspruchten dünnen Platten mit Rissen und Löchern - Nichtlineare Finite Elemente Analysen";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2015;
Abschlussprüfung: 23.09.2015.
Zusätzliche Informationen
-
J.T. Fischer:
"Quantification of microdamage formation during fatigue testing of individual trabeculae";
Betreuer/in(nen): P.J. Thurner, M. Frank;
Institut für Leichtbau und Struktur-Biomechanik,
2018;
Abschlussprüfung: 21.06.2018.
-
T. Flatscher:
"Modellierung der Steifigkeit und Stabilität von Wellpappe";
Betreuer/in(nen): F. G. Rammerstorfer, T. Daxner;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2007.
Zusätzliche Informationen
-
M.M. Forte:
"Methoden zur bruchmechanischen Untersuchung von Verschleiss an den Laufflächen von Schienfahrzeugrädern";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2008;
Abschlussprüfung: 22.12.2008.
-
C. Freidhager:
"Automatic detection of landmarks and axes at the human knee joint";
Betreuer/in(nen): D. H. Pahr, A. Lorenz;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2018;
Abschlussprüfung: 18.12.2018.
-
W. Freimüller:
"Spannungsanalyse des Oberschenkelknochens - Einfluß verschiedener Fixierungsmethoden bei pertrochanteren Oberschenkelfrakturen";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1992.
-
N. Friedl:
"Optimierung von gekrümmten Kastenträgern";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1993.
-
M. Friedrich:
"Kavitation von einem High-Skew-Propeller im Vergleich zu einem Wageningen-B Propeller";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1988.
-
B. Fritz:
"Development of Testing and Simulation Protocol for Proximal Femurs";
Betreuer/in(nen): D. H. Pahr;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2010;
Abschlussprüfung: 23.06.2010.
Zusätzliche Informationen
-
J.M. Fröschl:
"Neue Verfahren in der Toplogieoptimierung für thermisch hochbelastete Motorbauteile";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2002.
-
A. Fürlinger:
"Entwicklung eines statisch überbestimmten Lastgeschirrs mit flexiblen Lasteinleitungselementen für Flugzeugstrukturversuche";
Betreuer/in(nen): H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2011.
Zusätzliche Informationen
-
I. Fulajtar:
"Propellererregte Druckschwankungen an der Außenhaut (des Schiffes) durch einen High-Skew-Propeller";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1990.
-
R. Gabriel:
"Entwicklung von Finite Elemente Algorithmen in C und Bewertung von 2/D Modellen";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1993.
-
M. Gächter:
"Strukturoptimierung von Automobilkomponenten auf Basis von Ermüdungssimulationen";
Betreuer/in(nen): H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2014.
Zusätzliche Informationen
-
J. Gager:
"Numerical Simulations of Delaminations and Cracks in Glued Die-Attach Semiconductor Devices";
Betreuer/in(nen): H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2010;
Abschlussprüfung: 09.02.2010.
Zusätzliche Informationen
-
M. B. Gándara:
"Assessment of Mixed Uniform Boundary Conditions for Predicting the Macroscopic Mechanical Behavior of Particle Reinforcement Composite Materials";
Betreuer/in(nen): H. J. Böhm, D. H. Pahr;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien; Universidade de Vigo,
2008.
Zusätzliche Informationen
-
C. Gaßner:
"Development and Validation of a Material Model with Artificial Neural Networks";
Betreuer/in(nen): H. J. Böhm;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2014;
Abschlussprüfung: 06.03.2014.
Zusätzliche Informationen
-
P. Gehr:
"Die CE-Zertifizeierung von Sportbooten laut Richtlinie 94/25/EG vom 16. Juni 1994 und ihre Anwendung";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1997.
-
M. Geiss:
"Mechanische Eigenschaften partikelverstärkter Biopolymere";
Betreuer/in(nen): J. Stampfl, H. E. Pettermann;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2006;
Abschlussprüfung: 22.05.2006.
-
R. Gmeiner:
"Mechanische Eigenschaften glasfaserverstärkter Biopolymere";
Betreuer/in(nen): J. Stampfl, H. E. Pettermann;
Institut für Werkstoffwissenschaft und Werkstofftechnologie,
2012;
Abschlussprüfung: 31.05.2012.
-
A. Grabos:
"Effect of anti-resorptive treatments on material properties and damage behavior of individual trabeculae of bone";
Betreuer/in(nen): P.J. Thurner, M. Frank, M. Allen;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2019;
Abschlussprüfung: 24.10.2019.
-
R. Gradinger:
"Das mechanische Verhalten von Aluminiumschaum bei Druck- und Crushbelastung - Experimente und Numerische Simulation";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1997.
-
A. Gradischar:
"Knochenumbau im menschlichen Femur infolge der Implantation von zementfreien Hüftgelenksendoprothesen";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2002.
-
R. Graf:
"Entwicklung von vereinfachten 3D-Simulationsmodellen zur Analyse des Kollisionsverhaltens von Zugverbänden mit dem expliziten FE-Programm PAM-CRASH";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Struktur-Biomechanik,
2004.
Zusätzliche Informationen
-
G. Griess:
"Implementierung eines Knochenwachstumsalgorithmus in ABAQUS";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2002.
-
T. Gross:
"The Effects of Heterogeneous Mineralization on the Elastic and Yield Properties of Human Trabecular Bone";
Betreuer/in(nen): P.K. Zysset, D. H. Pahr;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2010;
Abschlussprüfung: 16.04.2010.
Zusätzliche Informationen
-
B. Grossauer:
"Statische und dynamische Analysen zur Vordimensionierung des Deployment-Armes einer faltbaren Satelliten-Antenne";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1991.
-
M. Guggenberger:
"Crashverhalten von Metallschäumen und mikromechanische Simulationen";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1996.
-
S. Haas:
"Rechenprogramm zur Ermittlung der Bandkrümmung aus Durchhangsmessungen an Endlosbändern";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1990.
-
A. Hahn:
"Analyse des nichtlinearen Verhaltens eines Schraubsystems ALUGRIP für Rahmenverbindungen im Schienenfahrzeugbau";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1998.
-
S. Hampel:
"Bewertungsmöglichkeiten von Stellen konzentrierter Spannungen in Faser-Matrix-Laminaten";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2002.
-
R. Hauleitner:
"Investigation of Cage Versions of Fast Rotating Ball Bearings";
Betreuer/in(nen): H. J. Böhm, T. Daxner;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2007;
Abschlussprüfung: 20.06.2007.
Zusätzliche Informationen
-
Ph. Heinzl:
"Auslegung eines LKW-Hinterachsverbandes mittels FE-Analyse und mehrachsiger Betriebsfestigkeitsrechnung";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1998.
-
G. Henkes:
"Hydrodynamische Optimierung des Schaufelrades des muskelkraftbetriebenen Rennbootes "Hydrodynamosaurus austriacus"";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1997.
-
N Hennicke:
"Structural and Mechanical Properties of Collagen During Embryonic Development";
Betreuer/in(nen): P.J. Thurner, O.G. Andriotis;
Institut für Leichtbau und Struktur-Biomechanik,
2018;
Abschlussprüfung: 21.03.2018.
-
R. Hillinger:
"Entwicklung eines Algorithmus zur Auswertung der Meßwerte eines CC-Gießspaltmeßgerätes";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1986.
-
T. Hinterdorfer:
"FE-Modellierung und -Analyse eines Komposit-Flywheel-Rotors und Optimierungsbetrachtungen";
Betreuer/in(nen): H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2010;
Abschlussprüfung: 27.10.2010.
-
T. Hofecker:
"Untersuchung der elektrischen Triebfahrzeuge Stadler FLIRT3, KISS und EC 250 im Hinblick auf die Erfüllung der Notifizierten Nationalen Technischen Regeln (NNTR) und der Netzzugangsanforderungen für den Einsatz in Europa";
Betreuer/in(nen): A. Starlinger;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2017;
Abschlussprüfung: 23.02.2017.
Zusätzliche Informationen
-
P. Hoffmann:
"Elasto-Plastic Finite Element Simulations of Nanoindentation Problems Utilizing Hill's Potential";
Betreuer/in(nen): H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2018;
Abschlussprüfung: 22.03.2018.
Zusätzliche Informationen
-
K. Hofwimmer:
"FE-Modell eines O2 -Konverters mit gemauerter Feuerfestauskleidung";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2000.
-
H.J. Holl:
"Parameterstudien zur Abgrenzung der Anwendbarkeit eines Berechnungskonzeptes für erdbebenbeanspruchte Tankbauwerke";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1987.
-
S. Holl:
"Numerische FE-Analyse eines innovativen Mountainbikes";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2012;
Abschlussprüfung: 06.08.2012.
-
C.O. Huber:
"Analytical and Finite Element Analyses of Carbon Fiber Reinforced Rollers with Classical and Nonclassical Boundary Conditions";
Betreuer/in(nen): H. J. Böhm;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2003.
-
L. Huber:
"Modelling of time-temperature shifts of viscoelastic composites";
Betreuer/in(nen): H. E. Pettermann, M. Todt;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2020;
Abschlussprüfung: 09/2020.
-
M. Huber:
"Implementierung eines Post-Processing-Tools zur Bestimmung des lokalen Spannungsvektors an Materialgrenzen";
Betreuer/in(nen): M. Todt, H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2019;
Abschlussprüfung: 09.05.2019.
-
J. Hüsing:
"Numerische Simulation des Relaxationsverhaltens von viskoelastischen zellulären Strukturen";
Betreuer/in(nen): H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien; TU Dresden,
2011.
Zusätzliche Informationen
-
I. Jakl:
"Strukturanalyse des Side Wall Panels des MD11-Flugzeugs";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1989.
-
B. Jordanov:
"Finite Elemente Simulationen einer Composite-Geflechtstruktur";
Betreuer/in(nen): H. E. Pettermann, J. Kaul;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2019;
Abschlussprüfung: 25.09.2019.
-
G. Judex:
"Dynamische FE-Analysen an Femur mit Hüftsgelenksimplantaten";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2001.
-
A. Juen:
"Thermo-visko-elastische Simulationen von Metallpartikel-verstärkten Polymeren";
Betreuer/in(nen): H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2020;
Abschlussprüfung: 10/2020.
-
E. Jungmayr:
"Vogelschlagsimulation auf Hubschrauber-Cockpitstruktur";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2003.
-
O. Kabbani:
"Quantification of microdamage formation during fatigue testing of individual trabeculae";
Betreuer/in(nen): P.J. Thurner, M. Frank;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2019.
Zusätzliche Informationen
-
L. Kain:
"Structural and Mechanical Evaluation of Collagen Fibils from Equine Tendon: The Effect of Age, Tendon Zone and Type";
Betreuer/in(nen): P.J. Thurner, O.G. Andriotis;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2017;
Abschlussprüfung: 17.05.2017.
Zusätzliche Informationen
-
I. Kálmán:
"Theoretische und experimentelle Untersuchungen zum Deformationsverhalten eines Linearrobotor";
Betreuer/in(nen): F. G. Rammerstorfer, I.C. Skrna-Jakl;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2014;
Abschlussprüfung: 18.06.2015.
-
Ch. Kalteis:
"Experimentelle Charakterisierung und Simulation von Dünnschichtverklebungen";
Betreuer/in(nen): M. Todt, H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2021;
Abschlussprüfung: 15.12.2021.
-
J.T. Kamml:
"Validated Finite Element Models of Composite Bones in Sideways Load Configuration";
Betreuer/in(nen): D. H. Pahr, L. Grassi, H. Isaksson;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2017;
Abschlussprüfung: 21.06.2017.
Zusätzliche Informationen
-
C. Karl:
"Mechanical Anisotropy of Human Vertebral Bone Measured by the Means of Microindentation with Special Focus on Osteophyte Structures";
Betreuer/in(nen): D. H. Pahr, P.K. Zysset;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2013;
Abschlussprüfung: 16.10.2013.
Zusätzliche Informationen
-
K.H. Karner:
"Homogenisierung und Lokalisierung bei der Modellierung von periodisch strukturierten, schalenartigen Strangpressprofilen";
Betreuer/in(nen): F. G. Rammerstorfer, I.C. Skrna-Jakl, D. H. Pahr;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2005.
Zusätzliche Informationen
-
A. Keber:
"FE-Innenakustikberechnung der Traktorkabine SK3";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1992.
-
J. Keppler:
"Steifigkeitsauslegung eines CFK-Motorradrahmens";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1997.
-
Ph. Kessler:
"Entwicklung von Routinen zum automatisierten Abgleich zwischen Berechnungs- und Prüfstandergebnissen von Drehgestellrahmen bei Laborversuchen nach EN 13749";
Betreuer/in(nen): A. Starlinger;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2021;
Abschlussprüfung: 15.04.2021.
-
A. Kholkin:
"Numerical Simulation of Damage and Failure of Laminated 3-Point Bending Specimens";
Betreuer/in(nen): H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien; Universidade de Aveiro,
2012.
Zusätzliche Informationen
-
M. Kinzl:
"Kontinuumsmechanische Modellierung von Muskelgewebe";
Betreuer/in(nen): T. Daxner, P.K. Zysset;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2009;
Abschlussprüfung: 22.04.2009.
Zusätzliche Informationen
-
T. Kitzler:
"An Improved Finite Element Model of the Human Vertebral Body";
Betreuer/in(nen): P.K. Zysset;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2006.
Zusätzliche Informationen
-
C Klancnik:
"Comparison of Analytical and Numerical Models for Composites with Sphere-Shaped Reinforcements";
Betreuer/in(nen): H. J. Böhm;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2017;
Abschlussprüfung: 04.09.2017.
Zusätzliche Informationen
-
B. Kóbor:
"Finite Elemente Simulationen einer Lochplatte aus Faserverbund-Laminat";
Betreuer/in(nen): H. E. Pettermann, J. Kaul;
Institute of Lightweight Design and Structural Biomechanics,
2018;
Abschlussprüfung: 21.03.2018.
Zusätzliche Informationen
-
C. Kölbl:
"Untersuchung der strukturellen Stabilität und des Nachbeulverhaltens einer seilverspannten Gitterstruktur";
Betreuer/in(nen): M. Todt, H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2019;
Abschlussprüfung: 20.11.2019.
-
M. Koller:
"Simulation des seitlichen Verlaufens von endlosen Stahlbändern";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2009.
Zusätzliche Informationen
-
E. Kounis:
"Development of a Computer Interface for the Design of Root Analogue Dental Implants";
Betreuer/in(nen): D. H. Pahr;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien; Aristotle University of Thessaloniki,
2013.
Zusätzliche Informationen
-
M. Kozyrev:
"Mechanical Testing of Individual Osteoens of Cortical Bone";
Betreuer/in(nen): P.J. Thurner, C.J. Collins;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2017;
Abschlussprüfung: 27.09.2017.
-
W. Krach:
"Spannungs- und Remodelinganalyse im Knochen um eine Knieendoprothese mit Dübelverankerung";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1992.
-
D. Kremmel:
"FEM und Modellreduktion. Vergleichsstudie des Doorslams mit Kontaktberücksichtigung";
Betreuer/in(nen): H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik,
2013.
-
T. Kremser:
"Die Weiterentwicklung des klassischen Tretbootes unter Einbeziehung von Tragflächen";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1997.
-
A. Kuhn:
"Die Bechnung von Beschleunigungssignalen in der Crash-Simulation mit einem expliziten Finite-Elemente-Verfahren";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2000.
-
A. Lamprecht:
"Effect of osmotic pressure on the viscoelastic properties of cortical bone";
Betreuer/in(nen): P.J. Thurner, O.G. Andriotis;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2020;
Abschlussprüfung: 22.07.2020.
-
M. Lamprecht:
"Schraubenrutschen unter dynamischer Belastung und Berechnung der effektiven Schnittigkeit einer querkraftbelasteten Schraubenverbindung";
Betreuer/in(nen): H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2016.
Zusätzliche Informationen
-
C. Lebschy:
"Modellierung der Biomechanik eines menschlichen Thorax mittels Finite-Elemente";
Betreuer/in(nen): D. H. Pahr;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2021.
-
L.F. Leidinger:
"An Early Phase Crashworthiness Assessment and Design Methodology for CFRP Vehicle Structures";
Betreuer/in(nen): F. Duddeck, H. J. Böhm;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2016;
Abschlussprüfung: 14.12.2016.
Zusätzliche Informationen
-
W. Leitner:
"Entwicklung eines FSM beziehungsweise CSM Programmes für Stabilitätsuntersuchungen an ebenen Platten, Plattenstrukturen und ebenen versteiften Platten";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1990.
-
A. Lobner:
"Auswirkungen von Unsicherheiten auf das mechanische Verhalten von Gewebelaminaten";
Betreuer/in(nen): D. H. Pahr;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2009.
Zusätzliche Informationen
-
L. Loretz:
"FE-Analyse von verklebten Fenstern im Bus- und Schienenfahrzeugbau";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1995.
-
P. Luger:
"Analyse der dynamischen Beanspruchung der Seilklemmen eines Sesselliftes";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1997.
-
M.H. Luxner:
"Optimierung von Faserverbundbauteilen mit genetischen Algorithmen";
Betreuer/in(nen): F. G. Rammerstorfer, T. Daxner;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2003.
-
E. Magrutsch:
"Computerunterstützte Stabilitätsanalysen längsversteifter, axial gedrückter Zylinderschalen";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1986.
-
J.L. Mandayo Fernández:
"Numerical Simulations of the Crush Behavior of Cellular Structures";
Betreuer/in(nen): H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien; Universidade de Vigo,
2012.
Zusätzliche Informationen
-
W. Mann:
"Tether Storage Mechanism for Satellites - Design and Analysis";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2000.
-
C. Marte:
"Untersuchung von 2/2 Twill-Gewebe Laminaten mit Hilfe von 3D-Finite Elemente Einheitszellen";
Betreuer/in(nen): H. J. Böhm, D. H. Pahr;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2004.
Zusätzliche Informationen
-
D. Marx:
"Entwicklung eines Zugversuchs für die mikromechanische Charakterisierung von Knochen";
Betreuer/in(nen): P.J. Thurner, V. Nedelkovski, R. Gottwald;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2015.
-
E. Marzoner:
"Experimentelle und rechnerische Spannungsanalyse eines flugaschegefüllten Behälters";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1988.
-
R. Marzy:
"Dynamische Analyse eines Pendelfederhinterachssystems und Festigkeitsberechnung eines Pendelfederlagerbockes mit der FE-Methode";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1989.
-
W. Mayer:
"Entwicklung eines interaktiven Programmes zur bruchmechanischen Bewertung von Fehlern in Konstruktionen aus metallischen Werkstoffen";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1989.
-
W. Mayer:
"Entwicklung eines interaktiven Programmes zur bruchmechanischen Bewertung von Fehlern in Konstruktionen aus metallischen Werkstoffen";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1989.
-
J.K. Mayr:
"Geometrisch nichtlineare Spannungs- und Stabilitätsanalyse einer windbelasteten Teilüberdachung eines Schwimmdachbehälters";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1988.
-
M. Mechtler:
"Structural Optimization of a Tram Car Body in Differential Design";
Betreuer/in(nen): H. J. Böhm;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2019;
Abschlussprüfung: 30.04.2019.
Zusätzliche Informationen
-
M. Meindlhumer:
"Schädigungs- und Versagensvorhersage von Gewebelaminaten duch mechanismenbasierte Hüllflächen";
Betreuer/in(nen): H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2013.
Zusätzliche Informationen
-
V. Migkos:
"Volumselemente für diamantpartikelverstärkte Metallmatrix-Composites";
Betreuer/in(nen): H. J. Böhm;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien: Aristotle University of Thessaloniki,
2013.
Zusätzliche Informationen
-
K. Nägl:
"A comparison of the biomechanical behaviour of simple artificial, composite, and 3D FDM printed human femoral bones";
Betreuer/in(nen): D. H. Pahr, A. Synek;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2021.
-
M. Nagler:
"Analytical Treatment of Residual Stresses in Multilayer Coatings";
Betreuer/in(nen): H. J. Böhm, M. Todt;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2017;
Abschlussprüfung: 21.06.2017.
Zusätzliche Informationen
-
R. Nedelik:
"Implementierung eines speziellen Finiten Elementes für Spannungskonzentrationen an Lochrändern";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1995.
-
A.W. Nemetz:
"Dynamic Simulations of Rolling Element Bearing Cages";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2016.
-
F. Nigl:
"3-D Finite Element Analysis of a Chevron Notched, Four Point Test Specimen";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2001.
-
W. Nissler:
"Konstruktion und Berechnung eines Spezialanhängers";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1984.
-
S. Nogales:
"Study of Response of Particle Reinforced Ductile Matrix Composites under Selected Load Cases";
Betreuer/in(nen): H. J. Böhm;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien; UP Madrid,
2004.
-
S. Oschkera:
"Berechnung und Konstruktion einer Tragfläche eines Kleinflugzeuges in gemischter Bauweise";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2000.
-
B. Ostermann:
"Fracture Mechanics Investigation of Refiner Discs";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2012;
Abschlussprüfung: 06.09.2012.
-
C. Pagès Miró:
"Quasi-Static Simulation of Laminated Structures with Explicit Finite Element Methods";
Betreuer/in(nen): H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien; UPC Terrassa,
2013.
Zusätzliche Informationen
-
W. Pammer:
"Ersatz eines Al-Beschlags einer Tragflächenklappe durch einen Carbon-Beschlag in RTM-Bauweise";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2002.
-
H.J. Payer:
"FE-Analyse einer Glasdurchführung";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1992.
-
W. Pehn:
"Entwicklung eines Versuchsaufbaus und Experimentelle Untersuchungen zum lokalen Beulverhalten von Sandwichplatten";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1991.
-
H. Pettermann:
"Entwicklung eines Simulationsalgorithmus der natürlichen Anpassung des orthotropen Knochenmaterials";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1993.
-
L. Peyker:
"A Feasibility Study of a Bone-Screw MicroFE Model";
Betreuer/in(nen): D. H. Pahr;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2012;
Abschlussprüfung: 25.01.2012.
Zusätzliche Informationen
-
A. F. Plankensteiner:
"Mean Field Algorithmen zur thermo-elasto-plastischen Materialcharakterisierung von MMCs";
Betreuer/in(nen): H. J. Böhm;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1994.
-
T. Platter:
"Spannungs- und Stabilitätsuntersuchungen an doppelt gewölbten Schalen in Dachkonstruktionen";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1992.
-
M. Pleschberger:
"Entwicklung eines Rechenmodells zur Spannungsanalyse des Unterkiefers";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1992.
-
H. Pramberger:
"Optimierung eines LKW-Achsschenkels";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1989.
-
S. Prandstetter:
"State of the Art of Topology Optimization";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2001.
-
S. PRANDSTETTER:
"State of the art of topology optimization ";
Betreuer/in(nen): F. G. Rammerstorfer;
006 Büro der Vizerektoren,
2000.
-
M.P. Preisel:
"Optimierung eines Leichtbau-Roboterarms";
Betreuer/in(nen): F. G. Rammerstorfer, I.C. Skrna-Jakl;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2011.
-
M. Priewasser:
"Experimental and Computational Study of the Cheliceral Fang of Cupiennius salei";
Betreuer/in(nen): F. G. Rammerstorfer, D. H. Pahr;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2012.
Zusätzliche Informationen
-
A. Pruckner:
"Strukturdynamische Untersuchungen zur Auslegung schwingungsberuhigender Isolatoren (Helicopter-Type Vibration Isolator)";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1994.
-
E. Rama Lista:
"Finite Element Simulations of Laminated Composites under Consideration of Nonlinear Ply Material and Delamination";
Betreuer/in(nen): H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien; Universidade de Vigo,
2012.
Zusätzliche Informationen
-
J. Regueiro Penado:
"Linear Viscoelastic UMAT Development in the Frequency Domain";
Betreuer/in(nen): H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2015.
Zusätzliche Informationen
-
C. Reichel:
"Bruchmechanische Simulation von Indentierungsversuchen in Gallium Nitrid";
Betreuer/in(nen): H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2018;
Abschlussprüfung: 20.06.2021.
Zusätzliche Informationen
-
E. Reiß:
"Entwicklung eines computerunterstützten Meßverfahrens zur Erfassung von Parameterresonanzen und experimentelle Verifikation";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1988.
-
T.J. Reiter:
"Entwicklung von numerischen Methoden zur Prognose spannungsbedingter Knochenumbildungen";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1990.
-
T. Resch:
"Entwicklung und Implementierung eines Algorithmus zur adaptiven Finite-Elemente-Netzgenerierung";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1994.
-
H. Rezvani-Naraghi:
"Locking-Phänomene bei Finiten Schalenelementen";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1996.
-
C. Riener:
"Entwicklung eines nichtlinearen Finite Elemente Simulationsmodells zur Nachbildung des Crash-Verhaltens von gewebeverstärkten CFK/Epoxid-Laminaten";
Betreuer/in(nen): H. E. Pettermann, M. Schwab;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2016;
Abschlussprüfung: 12.04.2016.
Zusätzliche Informationen
-
G. Riha:
"Analytische und numerische Simulation von Crashversuchen und Vergleich mit Experimenten";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1992.
-
A. Rittenschober:
"Nichtlineare Analyse des Beul- und Nachbeulverhaltens von gekippten, dünnwandigen, flüssigkeitsgefüllten Zylinderschalen";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1988.
-
D. Roither:
"Entwicklung eines Programms zur Erzeugung von Volumselementen auf Basis tetrakaidekaderförmiger Bereiche";
Betreuer/in(nen): H. J. Böhm;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2017;
Abschlussprüfung: 21.06.2017.
Zusätzliche Informationen
-
M. Rufin:
"Effect of glycation on surface charge and indentation stiffness of individual collagen fibrils";
Betreuer/in(nen): P.J. Thurner, G. Schitter, M. Nalbach, M. Poik;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2020;
Abschlussprüfung: 28.09.2020.
-
A. Ruthmeier:
"Structural Opimization of Reinforced Shell Structures";
Betreuer/in(nen): H. J. Böhm;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2015;
Abschlussprüfung: 30.10.2015.
Zusätzliche Informationen
-
A. Sajous:
"Analytical-Numerical Treatment of Edge-Effects in Layered Shells";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1995.
-
A. Salcher:
"FEM-Auslegung einer Kohlefaser-Geflechtstruktur";
Betreuer/in(nen): H. E. Pettermann, M. Schwab;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2015;
Abschlussprüfung: 20.05.2015.
Zusätzliche Informationen
-
B. Salcher:
"Finite-Elemente-Analysen und Design-Verbesserungen des längs- und ringversteiften Statorgehäuses eines Rohrturbinen-Generatorsatzes";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1997.
-
M. Schabasser:
"Lebensdauerberechung auf Basis von modalen Spannungen";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2000.
-
K. Scharf:
"Eine kritische Betrachtung der Schub- und Zugfeldtheorie";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1986.
-
M.M. Schasching:
"Finite Elemente Simulationen einer Composite-Struktur - Interaktion von Schichtschädigung und Delamination";
Betreuer/in(nen): H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2017;
Abschlussprüfung: 21.06.2017.
Zusätzliche Informationen
-
O. Schatko:
"Spannungs- und Verzerrungsanalyse eines Pleuels";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1994.
-
J. Scherübl:
"Nanomechanical-testing of individual of collagen fibrils from an osteogenesis imperfecta mouse model";
Betreuer/in(nen): P.J. Thurner, G. Schitter;
Institut für Leichtbau und Struktur-Biomechanik,
2018;
Abschlussprüfung: 21.06.2018.
-
S. Scheuch:
"Global/lokale Finite Elemente Analyse einer Flugzeugstruktur";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1997.
-
C. Schlegel:
"Kräfte- und Spannungsanalyse an der Lenkanlage eines Vierachs-Lkw mit der Methode der Finiten Elemente";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2000.
-
R. Schmid:
"Spannungsanalyse einer Modellguß-Oberkieferteilprothese";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1988.
-
E. Schnabler:
""Assumed Strain"-Formulierungen für nichtlineare degenerierte finite Schalenelemente";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1994.
-
M. Schneeberger:
"Hydrodynamische Optimierung des Schaufelrades des muskelkraftbetriebenen Rennbootes "Hydrodynamosaurus austriacus"";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1996.
-
C. Schörkhuber:
"Methode für die Festigkeits- und Lebensdauerberechnung von Abgasanlagen";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2006.
Zusätzliche Informationen
-
C. Schuecker:
"Evaluation of the Applicability of the Four-Point Bend End-Notched Flexure Test for Mode II Delamination Toughness";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2000.
-
K. Schulner:
"Die Berechnung der optimalen Schiffsgeschwindigkeit zu einer vorgegebeben Reiseroute";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1992.
-
M. Schwab:
"Prediction of Energy Dissipation due to Material Nonlinearities and its Application to Textile Composites";
Betreuer/in(nen): H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2013;
Abschlussprüfung: 25.11.2013.
Zusätzliche Informationen
-
J.J. Schwiedrzik:
"Finite Element Simulation of Berkovich Indentation in Bone";
Betreuer/in(nen): P.K. Zysset;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2010;
Abschlussprüfung: 10.08.2010.
Zusätzliche Informationen
-
J. Segurado:
"Micromechanical Analysis of the Mechanical Behavior of Sintered Refractory Metals";
Betreuer/in(nen): H. J. Böhm;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien; UP Madrid,
2000.
-
M. Seitzberger:
"FE-Analyse des instationären Temperaturfeldes beim Laser-Schweißen";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1992.
-
M. Seyr:
"Numerische Simulation von regelmäßigen zellulären Strukturen";
Betreuer/in(nen): H. J. Böhm, H. E. Pettermann;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2003.
-
E. Sindhuber:
"Simulation von Schweißverzügen bei der Schienenfahrzeug-Fertigung";
Betreuer/in(nen): H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2021;
Abschlussprüfung: 15.04.2021.
-
F.C. Spörl:
"Development of a Microgripper for a Collagen Fibril Tension Test";
Betreuer/in(nen): P.J. Thurner, A. Ovsianikov, M. Nalbach, F. Gantner;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2020;
Abschlussprüfung: 09.09.2020.
-
M. Springer:
"Nichtlineare Finite Elemente Simulation der Schädigungsmechanismen sowie der Resttragfähigkeit von schlagbeanspruchten Kohlenstofffaser-Epoxidharz-Verbunden";
Betreuer/in(nen): H. E. Pettermann, M. Schwab;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2014;
Abschlussprüfung: 18.09.2014.
Zusätzliche Informationen
-
A. Starlinger:
"Stabilität von kugelschalenförmigen Generatorkuppeln gefluteter Rohrturbinen";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1986.
-
G. Staudinger:
"Systematische numerische Untersuchung des Werkstoffverhaltens von kurzfaserverstärkten Kunststoffen";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1988.
-
L. Steiner:
"A Comparison of Different Bone Remodelling Simulation Algorithms based on micro Finite Element Analysis";
Betreuer/in(nen): D. H. Pahr;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2015;
Abschlussprüfung: 03.11.2015.
Zusätzliche Informationen
-
W. Stengg:
"Zusammenfassung der Erkenntnisse im Zusammenhang Vogelflug auf Luftfahrzeuge";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1985.
-
C. Stigler:
"Adaption des Verfahrens von HOLDEN - Methode zur Berechnung von propellerinduzierten Druckschwankungen auf der Schiffsaußenhaut - um dieses auch für Propeller mit einer starken Rückenlage der Propellerblätter (High-Skew-Propeller) verwenden zu können";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1992.
-
T. Stockinger:
"Analytische, numerische und experimentelle Untersuchungen des Knitterns der Deckschichten von Schaumkern-Sandwichplatten unter Biegung und Druck";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1996.
-
C.R. Strasser:
"Propellerfreifahrtcharakteristik im zweiten und dritten Quadranten in Polynomform";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2003.
-
R. Strasser:
"Spannungsanalyse einer vorgespannten Doppelkonusverbindung";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1993.
-
M. Stufferin:
"Elasto-Plastische Materialmodellierung eines stark anisotropen und asymmetrischen Polystyrolschaums";
Betreuer/in(nen): H. J. Böhm;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2017.
-
P. Svoboda:
"Entwicklung eines Rechenmodells zur Spannungsanalyse eines Keramikventils";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1994.
-
A. Svobodnik:
"Entwicklung eines Rechenprogrammes für die Dimensionierung von innendruckbelasteten Schalenverzweigungen";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1987.
-
A. Synek:
"A Specimen Specific Finite Element Validation Study of Distal Radius Fracture Osteosynthesis";
Betreuer/in(nen): D. H. Pahr;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2015;
Abschlussprüfung: 26.03.2015.
Zusätzliche Informationen
-
T. Tamm:
"Biomechanische Spannungsanalyse an Blattimplantaten im zahnlosen Unterkiefer";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1991.
-
R. Theimer:
"Strucutral Design of a Tethered Satellite - Static and Dynamic Analysis During Launching";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2000.
-
S. Theiner:
"Extrusion 3D Bioprinting of nanocellulose based bioinks";
Betreuer/in(nen): A. Ovsianikov, J. Stampfl, P.J. Thurner;
E308,
2021;
Abschlussprüfung: 22.06.2021.
-
G. Tisch:
"Parameterstudie über das Steifigkeitsverhalten geschraubter Flanschverbindungen in Stuhlungen von Papiermaschinen auf Basis der Methode der Finiten Elemente";
Betreuer/in(nen): H. J. Böhm;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2000.
-
M. Todt:
"Long Wave Instabilities in Periodic Structures";
Betreuer/in(nen): T. Daxner;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2008;
Abschlussprüfung: 20.08.2008.
Zusätzliche Informationen
-
A. Tomschi:
"Alternative Ansätze zur Dynamiksimulation des Kurbeltriebes mit Finite-Elemente-Modellen";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2017;
Abschlussprüfung: 29.03.2017.
-
F. Toth:
"Aeroelastic Analysis of a Glider Aircraft";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2010;
Abschlussprüfung: 14.06.2010.
Zusätzliche Informationen
-
S. Trummer:
"Klebverbindungen - Simulation und Experiment";
Betreuer/in(nen): M. Todt, T. Koch, H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2020;
Abschlussprüfung: 26.02.2020.
-
V. Unger:
"Non-linear finite element simulations of nanoindentation in Gallium Nitride considering fracture mechanics and plasticity";
Betreuer/in(nen): H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2018;
Abschlussprüfung: 24.10.2018.
Zusätzliche Informationen
-
T. Unterholzner:
"Design und Umsetzung eines Test-Aufbaus zur in-vivo Kraftmessung an Flexorsehnen";
Betreuer/in(nen): E. Kaniusas, P.J. Thurner;
E354,
2021;
Abschlussprüfung: 17.06.2021.
-
J. Valencia Novelle:
"Numerical Simulation of the Mechanical Behavior of Perforated Woven Fabric Laminates";
Betreuer/in(nen): D. H. Pahr;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien; Universidade de Vigo,
2011.
Zusätzliche Informationen
-
C. Vana:
"Kühlprobleme an Motorseglertriebwerken";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1983.
-
J.L. Vázquez Lopez:
"Study of Microfields in the Reinforcement Phase of Two-Phase Composites";
Betreuer/in(nen): H. J. Böhm;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien; Universidade de Vigo,
2012.
Zusätzliche Informationen
-
T. Vosel:
"Triaxial Test Rig for Mechanical Ground Support Equipment of Ariane 5 Compatible Satellites";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2013;
Abschlussprüfung: 31.10.2013.
-
A. Wagner:
"Development of an Elasto-Damage Constitutive Law for Implicit Finite Element Methods";
Betreuer/in(nen): H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2020;
Abschlussprüfung: 09/2020.
-
A. Wagner:
"Efficient Finite Element Modelling of Residual Stresses in Multilayer Coatings";
Betreuer/in(nen): H. J. Böhm, M. Todt;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2017;
Abschlussprüfung: 22.06.2017.
Zusätzliche Informationen
-
L. Wagner:
"Reproducibility of the HR-pQCT based FE-Analysis of the Distal Radius";
Betreuer/in(nen): P.K. Zysset;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2010;
Abschlussprüfung: 08.09.2010.
Zusätzliche Informationen
-
M. Waldboth:
"Implementierung eines singulären 2/D Elementes mit variabler Ordnung der Singularität";
Betreuer/in(nen): H. J. Böhm;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2002.
-
R. Waldner:
"Entwicklung eines FE-Algorithmus zur effizienten linearen Spannungsanalyse von rotationssymmetrischen Körpern unter nicht-rotationssymmetrischer Belastung";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1988.
-
R. Weiser:
"FE-Analyse des Einziehprozesses eines viskoelastischen PE-Liners in ein Steigrohr und des Langzeitverhaltens dieses Verbundes";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2010;
Abschlussprüfung: 07.04.2010.
-
M. Weiss:
"Untersuchung der Stabilität von thermisch beanspruchten Stahlbändern mit der Methode der Finiten Elemente";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1988.
-
E. Weissenbek:
"Finite Element Calculation of a Gear Box and Development of a Model of Tapered Roller Bearings";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1989.
-
W. Wenzl:
"Simulation des Punktschweißens";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2001.
-
A. Wiesinger:
"Simulation of Crack Formation in Thin Copper Films on Polyimide Substrate";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Struktur-Biomechanik, TU Wie,
2014;
Abschlussprüfung: 08.04.2014.
Zusätzliche Informationen
-
P. Wiklicky:
"Entwicklung und Implementierung eines FE-Algorithmus zur Optimierung von Kerbkonturen";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1989.
-
S. Willminger:
"Zur Analyse des Kollapsverhaltens axialgedrückter schaumgefüllter Profile";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1998.
-
F. Wimmer:
"Optimale Steifigkeits- und Massenverteilung eines Tennisschlägers hinsichtlich dynamischen Verhaltens";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1985.
-
G. Wimmer:
"Strength Analyse of Composite Components - Implementation of New Procedures";
Betreuer/in(nen): H. E. Pettermann, D. H. Pahr;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2006.
Zusätzliche Informationen
-
J.F. Winklinger:
"Investigation of Corner Joints of Sandwich Plates";
Betreuer/in(nen): H. E. Pettermann;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2006.
Zusätzliche Informationen
-
S. Wintschnig:
"Experimentelle Verifizierung von Versagensmechanismen verschiedener Hohlprofile";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1996.
-
J. Wischenbart:
"Simulation des thermisch-mechanischen Ermüdungsverhaltens von Aluminiumzyliderköpfen";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1999.
-
R. Wollendorfer:
"Entwicklung eines Optimierungsprogrammes für Querschnitte von geschweißten Trägern";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1988.
-
M. Zelezny:
"Numerische Analyse von Stabilitätsproblemen bei Temperaturbelastung dünnwandiger Rotationsschalen";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1994.
-
M. Zigo:
"Bewertung des Ermüdungsverhaltens von Schweißnähten und Schweißpunkten auf Basis lokaler Konzepte";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2003.
-
H. Zinn-Zinnenburg:
"Anwendung von Optimierungsalgorithmen auf die Auslegung eines Reisezugwagenvorbaus";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1992.
-
J. Zoppoth:
"Automatisierte Finite Elemente Berechnung von Drehgestellen nach UIC 515";
Betreuer/in(nen): F. G. Rammerstorfer;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1993.
-
S. Zulaika Arkauz:
"Effects of the Relative Sizes of Inhomogeneities on the Mechanical Behavior of Composite Materials";
Betreuer/in(nen): H. J. Böhm;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2015.
Zusätzliche Informationen
Wissenschaftliche Berichte
-
R.D. Bitsche:
"Jahresabschlussbericht 2005 für das Projekt Austrian Light Weight Structures";
Bericht für Leichtmetallkompetenzzentrum Ranshofen GmbH;
2006;
12 S.
Zusätzliche Informationen
-
R.D. Bitsche:
"Jahresabschlussbericht 2006 für das Projekt Austrian Light Weight Structures";
Bericht für Leichtmetallkompetenzzentrum Ranshofen GmbH;
2007;
18 S.
Zusätzliche Informationen
-
H. J. Böhm:
"A Short Introduction to Basic Aspects of Continuum Micromechanics";
Bericht für Institut für Leichtbau und Struktur-Biomechanik, TU Wien;
Berichts-Nr. ILSB Report 206,
2007;
161 S.
-
H. J. Böhm:
"Endbericht zum Christian Doppler Laboratorium Funktionsorientiertes Werkstoff-Design";
Bericht für Christian Doppler Forschungsgesellschaft;
2005.
Zusätzliche Informationen
-
H. J. Böhm:
"Jahresbericht 2001 zum Christian Doppler Laboratorium Funktionsorientiertes Werkstoff-Design";
Bericht für Christian Doppler Forschungsgesellschaft, Wien;
2002.
Zusätzliche Informationen
-
H. J. Böhm:
"Jahresbericht 2002 zum Christian Doppler Laboratorium Funktionsorientiertes Werkstoff-Design";
Bericht für Christian Doppler Forschungsgesellschaft;
2003.
Zusätzliche Informationen
-
H. J. Böhm:
"Jahresbericht 2003 zum Christian Doppler Laboratorium Funktionsorientiertes Werkstoff-Design";
Bericht für Christian Doppler Forschungsgesellschaft;
2004.
Zusätzliche Informationen
-
H. J. Böhm:
"Jahresbericht 2004 zum Christian Doppler Laboratorium Funktionsorientiertes Werkstoff-Design";
Bericht für Christian Doppler Forschungsgesellschaft;
2005.
Zusätzliche Informationen
-
H. J. Böhm:
"Notes on Some Mean Field Approaches for Thermoelastic Two-Phase Composites";
Bericht für Institut für Leichtbau und Struktur-Biomechanik, TU Wien;
Berichts-Nr. ILSB-Report 259,
2011;
188 S.
-
H. J. Böhm, T. Drabek, A. Eckschlager:
"Mikromechanik inhomogener Werkstoffe - Dreidimensionale Einheitszellenmodelle. Jahresbericht 2002";
Bericht für Zentraler Informatikdienst der TU Wien;
2002.
Zusätzliche Informationen
-
H. J. Böhm, A. Kuhn, G. Schlager:
"KoMMoDO (Komplexe MaterialModellierungs-Offensive)";
Bericht für FFG (BRIDGE-Endbericht);
2008;
11 S.
Zusätzliche Informationen
-
H. J. Böhm, S. Nogales:
"Phase 2 AC Report: Modelling of Discontinuously Reinforced and Skeleton Composites";
Bericht für ExtreMat Integrated Project;
2005.
Zusätzliche Informationen
-
H. J. Böhm, S. Nogales:
"State of the Art Review: Modelling of Discontinuously Reinforced and Skeleton Composites";
Bericht für ExtreMat Integrated Project;
2005.
Zusätzliche Informationen
-
T. Ceglar, H. E. Pettermann:
"Calibration of material parameters for Fung´s and Holzapfel-Gasser-Ogden anisotropic hyperelastic strain energy functions: Application for fibre reinforced elastomers (Confidental)";
Bericht für Polymer Competence Center Leoben GmbH (PCCL);
Berichts-Nr. ILSB-Report 303,
2019;
33 S.
-
T. Ceglar, H. E. Pettermann:
"FEM simulations of fully and nearly incompressible hyperelastic materials: The effects of numerical precision (Confidental)";
Bericht für Polymer Competence Center Leoben GmbH (PCCL);
Berichts-Nr. ILSB-Report 300,
2017;
15 S.
-
T. Ceglar, H. E. Pettermann:
"Nonlinear homogenisation of a FRE unit cell (confidential)";
Bericht für Polymer Competence Center Leoben GmbH (PCCL);
Berichts-Nr. ILSB-Report 304,
2020;
13 S.
-
T. Ceglar, H. E. Pettermann:
"Preliminary study on Fiber Reinforced Elastomer (FRE) behavior by means of unit cell FEM simulations (confidential)";
Bericht für Polymer Competence Center Leoben GmbH (PCCL);
Berichts-Nr. ILSB-Report 306,
2020;
9 S.
-
T. Ceglar, H. E. Pettermann:
"Work-flow for modelling and simulation of multi-fibre unit cells under tri-axial loading (Confidental)";
Bericht für Polymer Competence Center Leoben GmbH (PCCL);
Berichts-Nr. ILSB-Report 302,
2018;
24 S.
-
T. Ceglar, H. E. Pettermann:
"Wrinkling of thin fibre reinforced elastomer shells under tensile loads (confidential)";
Bericht für Polymer Competence Center Leoben GmbH (PCCL);
Berichts-Nr. ILSB-Report 305,
2020;
14 S.
-
C. Cheyrou, H. E. Pettermann:
"FEM Simulation of the Thermo-Viscoelastic Behaviour of Composites";
Bericht für Institut für Leichtbau und Struktur-Biomechanik, TU Wien;
Berichts-Nr. ILSB-Report 298,
2016;
49 S.
Zusätzliche Informationen
-
B. Daum:
"FE-Simulation Micropillar";
Bericht für Institut für Leichtbau und Struktur-Biomechanik, TU Wien;
Berichts-Nr. ILSB-Report 262,
2012;
36 S.
-
T. Daxner, H. E. Pettermann:
"Optimization of Laminates with Genetic Algorithms";
Bericht für Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR);
2002.
Zusätzliche Informationen
-
T. Drabek:
"Modelllierung duktiler Schädigung in Metall-Matrix-Verbundwerkstoffen. Jahresbericht 2003";
Bericht für Zentraler Informatikdienst der TU Wien;
2003.
Zusätzliche Informationen
-
T. Drabek:
"Zur Modellierung duktiler Schädigung mit der Finite Elemente Methode";
Bericht für Christian Doppler Laboratorium Funktionsorientiertes Werkstoff-Design;
2003.
Zusätzliche Informationen
-
T. Drabek, H. J. Böhm:
"Nichtlokale Modellierung duktiler Schädigung in Metallmatrix-Verbundwerkstoffen";
Bericht für Zentraler Informatikdienst der TU Wien;
2004.
Zusätzliche Informationen
-
D. Duschlbauer, H. E. Pettermann:
"Finite Elemente basierende Parameterstrudie zur Verdichtung von porösem Molybdän unter dreiachsigen Beanspruchungszusändent";
Bericht für Plansee AG;
2002.
-
R. Duy, M. Schasching, M. Todt, H. E. Pettermann:
"Wrinkling of hyperelastic sheets in the finite strain regime";
Bericht für Polymer Competence Center Leoben GmbH (PCCL);
Berichts-Nr. ILSB-Report 309,
2021;
18 S.
-
F.D. Fischer, E.R. Oberaigner, F. G. Rammerstorfer, T. Daxner:
"Flaring of a Tube - Analytical Approach";
Bericht für Shell International Exploration and Production BV, Den Haag;
2004.
Zusätzliche Informationen
-
T. Flatscher, H. E. Pettermann:
"PCCL Experiments Series III and Combination UMAT-EPD-FRP/CZE";
Bericht für Polymer Compentence Center Leoben (PCCL);
Berichts-Nr. 01/2010,
2010;
16 S.
-
N. Friedl, F.D. Fischer, F. G. Rammerstorfer:
"Ergänzungen zum Bericht: Untersuchung der Welligkeit von dünnen Blechbändern";
Bericht für BWG Düsseldorf;
2002.
-
N. Friedl, F. G. Rammerstorfer:
"Spannungsauswertung in eigenspannungsbehafteten Endlosbändern bei Reduktion der Vorspannung im bereits gebeulten Zustand";
Bericht für BWG Düsseldorf;
2002.
-
C.O. Huber, H. E. Pettermann:
"Some Basics on Tribology";
Bericht für Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR);
2004.
Zusätzliche Informationen
-
M. Luxner, H. J. Böhm:
"Rechnerische Untersuchung der Beanspruchung im Fußbereich der Bronzeplastiken am Dach der Wiener Oper";
Bericht für Bundestheater Holding, Wien;
2004.
Zusätzliche Informationen
-
D. H. Pahr:
"Linear and Non-linear Homogenization using FEM";
Bericht für internen Gebrauch;
2004.
-
D. H. Pahr:
"Numerische Auswertung des Steifigkeits- und Festigkeitsverhaltens gelochtert Faserverbundlaminate";
Bericht für Hochschuljubiläumsstiftung der Stadt Wien;
2002.
-
D. H. Pahr, S. M. Arnold:
"The Applicability of the Generalized Method of Cells for Analyzing Discontinuously Reinforced Composites, NASA/TM-2001-211165";
Bericht für National Aeronautics and Space Administration, Glenn Research Center, Cleveland, OH;
2001;
33 S.
-
D. H. Pahr, F. G. Rammerstorfer:
"Numerische Auswertung des Steifigkeits- und Festigkeitsverhaltens gelochter Faserverbundlaminate";
Bericht für Hochschuljubiläumsstiftung der Stadt Wien;
2002.
-
H. E. Pettermann:
"Arbeitsprogramm des ILFB im Rahmen der strategischen Forschung";
Bericht für Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR);
2002.
Zusätzliche Informationen
-
H. E. Pettermann:
"Direction Dependent Time-Temperature-Shift Functions and Energy Considerations in Viscoelasticity";
Berichts-Nr. ILSB-Report 301,
2018;
24 S.
Zusätzliche Informationen
-
H. E. Pettermann:
"Linear Thermo-Viscoelastic Orthotropic Plane Stress Constitutive Law in the Time Domain";
Bericht für Institut für Leichtbau und Struktur-Biomechanik;
Berichts-Nr. ILSB-Report 297,
2015;
37 S.
-
H. E. Pettermann:
"Viscoelastic Mechanical Properties of Cellular Materials and Structures - The Development of an ABAQUS UMAT";
Bericht für Institut für Leichtbau und Struktur-Biomechanik, TU Wien;
Berichts-Nr. ILSB Report 252,
2010;
14 S.
-
H. E. Pettermann, T. Ceglar:
"Unit Cell Predictions of a [90/0/0/90] FRE Laminate Under Uniaxial Stress in 45◦ Direction";
Bericht für Polymer Competence Center Leoben GmbH (PCCL);
Berichts-Nr. ILSB-Report 307,
2021;
6 S.
-
H. E. Pettermann, C. Schuecker:
"AAR-ILFB Jahresbericht der strategischen Forschung";
Bericht für Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR);
2002.
Zusätzliche Informationen
-
H. E. Pettermann, C. Schuecker:
"AAR-ILFB-Jahresbericht der strategischen Forschung im 2. Projektjahr";
Bericht für Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR);
2003.
Zusätzliche Informationen
-
H. E. Pettermann, C. Schuecker:
"Arbeitsprogramm des ILFB im Rahmen der strategischen Forschung im 2. Projektjahr";
Bericht für Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR);
2003.
Zusätzliche Informationen
-
H. E. Pettermann, C. Schuecker:
"Arbeitsprogramm des ILFB im Rahmen der strategischen Forschung im 3. Projektjahr";
Bericht für Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR);
2003.
Zusätzliche Informationen
-
H. E. Pettermann, C. Schuecker, C.O. Huber:
"AAR-ILFB-Jahresbericht der strategischen Forschung im 3. Projektjahr";
Bericht für Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR);
2004.
Zusätzliche Informationen
-
H. E. Pettermann, C. Schuecker, C.O. Huber:
"AAR-ILSB-Jahresbericht der strategischen Forschung im 4. Projektjahr";
Bericht für Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR);
2005.
Zusätzliche Informationen
-
H. E. Pettermann, C. Schuecker, C.O. Huber:
"Arbeitsprogramm des ILSB im Rahmen der strategischen Forschung im 4. Projektjahr";
Bericht für Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe;
2004;
5 S.
Zusätzliche Informationen
-
H. E. Pettermann, C. Schuecker, C.O. Huber, G. Wimmer:
"AAR-ILSB-Jahresbericht der strategischen Forschung im 5. Projektjahr";
Bericht für Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR);
Berichts-Nr. AAR-ILSB 27/2006,
2006;
14 S.
Zusätzliche Informationen
-
F. G. Rammerstorfer, F.D. Fischer, N. Friedl:
"Untersuchungen von eigenspannungsbehafteten Bändern bei Erwärmung und temperaturabhängigen Werkstoffeigenschaften - Sufe 1 im Projekt "Bandplanheit nach dem Durchzugsglühen von Stahlband"";
Bericht für Böhler Ybbstal Band;
2003.
-
F.G. Sander, F. G. Rammerstorfer, Y.I. Nyashin, E.Y. Simanovskaja:
"Development of the Biomechanical Fundamentals of the Human Orthodontic Treatment";
Bericht für INTAS, Brüssel;
2002.
-
M. Schasching, R. Duy, M. Todt, H. E. Pettermann:
"Wrinkling of Anisotropic Hyperelastic Sheets in the Finite Strain Regime";
Bericht für Polymer Competence Center Leoben GmbH (PCCL);
Berichts-Nr. ILSB-Report 310,
2021;
34 S.
-
M. Schasching, M. Todt:
"Linear continuum modeling of lattice materials by means of the Finite Element Method";
Berichts-Nr. ILSB-Report 312,
2021;
55 S.
-
C. Schuecker, C.G. Dávila, H. E. Pettermann:
"Modeling the Non-Linear Response of Fiber-Reinforced Laminates Using a Combined Damage/Plasticity Model";
Bericht für National Aeronauticas and Space Administration, Washington, DC;
Berichts-Nr. NASA/TM-2008-215314,
2008;
25 S.
Zusätzliche Informationen
-
C. Schuecker, H. E. Pettermann:
"Doppelwandiger Tank für kryogene Anwendungen: Vorstudien zur Berechnung der Außenwand unter Druckbelastung";
Bericht für Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR);
2006;
12 S.
Zusätzliche Informationen
-
C. Schuecker, H. E. Pettermann:
"Effektive Permeabilität von Laminaten in Dickenrichtung";
Bericht für Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR);
2002.
Zusätzliche Informationen
-
C. Schuecker, H. E. Pettermann:
"Kreisplatte unter zentrischer Druckbelastung als Test für interlaminare Schubfestigkeit von Laminaten";
Bericht für Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR);
2004.
Zusätzliche Informationen
-
C. Schuecker, H. E. Pettermann:
"Kreisplatte unter zentrischer Druckbelastung als Test für interlaminare Schubfestigkeit von Laminaten - Teil II";
Bericht für Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR);
2004.
Zusätzliche Informationen
-
C. Schuecker, H. E. Pettermann:
"Literature Review - Damage Modeling of Fiber Reinforced Laminates";
Bericht für Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR);
2004.
Zusätzliche Informationen
-
C. Schuecker, H. E. Pettermann:
"SHM Tests an Rohrproben: Festigkeitsberechnung bei Raumtemperatur";
Bericht für Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR);
Berichts-Nr. AAR-ILSB 26/2006,
2006;
12 S.
Zusätzliche Informationen
-
M. Schwab:
"Drop Tower Simulations";
Bericht für Institut für Leichtbau und Struktur-Biomechanik, TU Wien;
Berichts-Nr. 290,
2014;
17 S.
-
I.C. Skrna-Jakl:
"Was hat ein Sandwich im Leichtbau zu suchen?";
Bericht für Future, Das Zukunftsmagazin der Wiener Zeitung, Nr.2, p.13;
2010;
1 S.
-
I. Smojver, C. Schuecker, H. E. Pettermann:
"Damage Meso-Model for Fatigue Analysis of Fiber Reinforced Laminates";
Bericht für Kompetenznetzwerk f. Luftfahrttechnologie / Verbund- und Leichtwerkstoffe (AAR);
2005.
Zusätzliche Informationen
-
R.B. Stewart, F. Marketz, W.C.M. Lohbeck, F.D. Fischer, W. Daves, F. G. Rammerstorfer, H. J. Böhm:
"Expandable Wellbore Tubulars";
Bericht für Shell International Exploration and Production B.V.;
Berichts-Nr. SIEP 99-5628,
1999.
-
M. Todt, M. Schwab, H. E. Pettermann:
"Impact modeling in ABAQUS/Explicit - An introduction";
Bericht für Institut für Leichtbau und Struktur-Biomechanik, TU Wien;
Berichts-Nr. ILSB-Report 292,
2014;
18 S.
-
M. Todt, M. Schwab, H. E. Pettermann:
"Modeling of Transverse Shear in Layered Composite Structures With Cohesive Elements";
Bericht für Institut für Leichtbau und Struktur-Biomechanik, TU Wien;
Berichts-Nr. ILSB-Report 293,
2014;
25 S.
-
F. Toth:
"Design of an Equivalent Model for Hydrodynamic Model Tests";
Bericht für Institut für Leichtbau und Struktur-Biomechanik, TU Wien;
Berichts-Nr. ILSB-Report 274,
2012;
15 S.
-
F. Toth:
"Determination of Hydrostatic Forces by Acoustic Modeling and Derivation of Equivalent Systems";
Bericht für Institut für Leichtbau und Struktur-Biomechanik, TU Wien;
Berichts-Nr. ILSB-Report 280,
2013;
26 S.
-
F. Toth:
"Dynamic Modeling of an Air Cushion Supported Floating Platform and Comparison with Experimental Results";
Bericht für Institut für Leichtbau und Struktur-Biomechanik, TU Wien;
Berichts-Nr. ILSB-Report 277,
2013;
28 S.
-
F. Toth:
"Experimental Determination of Eigenfrequencies and Modeshapes by the Ibrahim Time Domain Model";
Bericht für Institut für Leichtbau und Struktur-Biomechanik, TU Wien;
Berichts-Nr. ILSB-Report 261,
2012;
22 S.
-
F. Toth:
"Model Tests of a Floating Platform at the Vienna Model Basin";
Bericht für Institut für Leichtbau und Struktur-Biomechanik, TU Wien;
Berichts-Nr. ILSB-Report 278,
2013;
26 S.
-
F. Toth:
"Natural Frequency and Modeshape Determination of a Floating Platform by the ITD Method and Comparison to Simulation Models";
Bericht für Institut für Leichtbau und Struktur-Biomechanik, TU Wien;
Berichts-Nr. ILSB-Report 264,
2012;
18 S.
-
F. Toth:
"Postprocessing of Regular Wave Measurements";
Bericht für Institut für Leichtbau und Struktur-Biomechanik, TU Wien;
Berichts-Nr. ILSB-Report 276,
2013;
12 S.
-
F. Toth:
"Progress Report of HelioFloat Work-Package 4: Marine Engineering and Fluid-Structure Interaction";
Bericht für Institut für Leichtbau und Struktur-Biomechanik, TU Wien;
Berichts-Nr. ILSB-Report 269,
2012;
3 S.
-
F. Toth:
"Stability of Flexible, Open Air Chambers";
Bericht für Institut für Leichtbau und Struktur-Biomechanik, TU Wien;
Berichts-Nr. ILSB-Report 279,
2013;
21 S.
-
A. Wiesinger, F. Toth, F. G. Rammerstorfer:
"Simulation of Crack Formation in Thin Copper Films on Polyimide Substrate";
Bericht für Institut für Leichtbau und Struktur-Biomechanik, TU Wien;
Berichts-Nr. ILSB-Report 285,
2014;
39 S.