Suchparameter:
- Suche in Publikations-Datensätzen nach: "S. Jakubek" ("S. Jakubek" als Name interpretiert)
- Textsuche eingeschränkt auf Datenfelder: Gesamter Datensatz
- Suche eingeschränkt auf Publikationsarten: Alle
- Suche eingeschränkt auf Zeitraum: Alle Daten in der Datenbank
Mit Ihren Suchparametern wurden 265 passende Datensätze gefunden:
265 |
- Fakultät für Maschinenwesen und Betriebswissenschaften |
Nur die ersten 200 Datensätze werden angezeigt.
Bücher und Buch-Herausgaben:
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
H. Ecker, A. Steindl, S. Jakubek (Hrg.):
"Proceedings of 8th European Nonlinear Dynamics Conference";
Institut für Mechanik und Mechatronik, Technische Universität Wien,
Wien,
2014.
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
A. Schirrer, A.L. Gratzer, S. Thormann, S. Jakubek, M. Neubauer, W. Schildorfer (Hrg.):
"Energy-Efficient and Semi-Automated Truck Platooning - Research and Evaluation";
Springer International Publishing,
Cham,
2022,
ISBN: 978-3-030-88681-3;
237 S.
Zusätzliche Informationen
Zeitschriftenartikel:
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
G. Aschauer, A. Schirrer, M. Kozek, S. Jakubek:
"PHiL pantograph testing via FE-based catenary model with absorbing boundaries";
Control Engineering Practice,
88
(2019),
S. 97
- 109.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
L. Böhler, D. Ritzberger, C. Hametner, S. Jakubek:
"Constrained extended Kalman filter design and application for on-line state estimation of highorder polymer electrolyte membrane fuel cell systems";
International Journal of Hydrogen Energy,
46
(2021),
11 S.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
Maxime Deregnaucourt, M. Stadlbauer, C. Hametner, S. Jakubek, H. Koegeler:
"Evolving model architecture for custom output range exploration";
Mathematical and Computer Modelling of Dynamical Systems,
21
(2015),
1;
S. 1
- 22.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
N. Didcock, S. Jakubek, C. Hametner, N. Keuth:
"Data based modelling of driveability for internal combustion engines";
Engineering Optimization,
50
(2018),
10;
S. 1755
- 1771.
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
N. Didcock, S. Jakubek, H. Koegeler:
"Regularisation methods for neural network model averaging";
Engineering Applications of Artificial Intelligence,
Volume 41 Issue C
(2015),
S. 128
- 138.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
Z. P. Du, A. Kravos, C. Steindl, T. Katrasnik, S. Jakubek, C. Hametner:
"Physically Motivated Water Modeling in Control-Oriented Polymer Electrolyte Membrane Fuel Cell Stack Models";
ENERGIES (eingeladen),
14
(2021),
7693.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
Z. P. Du, C. Steindl, S. Jakubek:
"Efficient two-step parametrization of a control-oriented zero-dimensional polymer electrolyte membrane fuel cell model based on measured stack data";
Processes (eingeladen),
9
(2021),
4;
S. 713.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
D. Erdogan, S. Jakubek, C. Mayr, C. Hametner:
"Combustion Engine Test Bed System Identification Under the Presence of Cyclic Disturbances";
IEEE Transactions on Industrial Electronics,
1
(2020).
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
D. Erdogan, S. Jakubek, C. Mayr, C. Hametner:
"Model Predictive Feedforward Control for High-Dynamic Speed Control of Combustion Engine Test Beds";
IEEE Open Journal of Industry Applications,
2
(2021),
S. 82
- 92.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
N. Euler-Rolle, M. Fuhrmann, M. Reinwald, S. Jakubek:
"Longitudinal tunnel ventilation control. Part 1: Modelling and dynamic feedforward control";
Control Engineering Practice,
63
(2017),
S. 91
- 103.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
N. Euler-Rolle, S. Jakubek, G. Offner:
"Model order reduction by projection applied to the universal Reynolds' equation";
Mathematical and Computer Modelling of Dynamical Systems,
20
(2014),
4;
S. 374
- 394.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
N. Euler-Rolle, F. Krainer, S. Jakubek, C. Hametner:
"Automated synthesis of a local model network based nonlinear model predictive controller applied to the engine air path";
Control Engineering Practice,
110
(2021),
104768.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
N. Euler-Rolle, C. Mayr, I. Skrjanc, S. Jakubek, G. Karer:
"Automated Vehicle Driveaway with a Manual Dry Clutch on Chassis Dynamometers: Efficient Identification and Decoupling Control";
ISA Transactions,
98
(2020),
S. 237
- 250.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
N. Euler-Rolle, I. Skrjanc, C. Hametner, S. Jakubek:
"Automated Generation of Feedforward Control using Feedback Linearization of Local Model Networks";
Engineering Applications of Artificial Intelligence,
50
(2016),
S. 320
- 330.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
A. Ferrara, S. Jakubek, C. Hametner:
"Energy management of heavy-duty fuel cell vehicles in real-world driving scenarios: robust design of strategies to maximize the hydrogen economy and system lifetime";
Energy Conversion and Management,
Volume 232
(2021).
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
G. Fuchs, A. Steindl, S. Jakubek:
"Local Jacobian based Galerkin Order Reduction for the Approximation of Large-Scale Nonlinear Dynamical Systems";
International Journal of Mathematical Models and Methods in Applied Sciences (eingeladen),
Volume 5
(2011),
Issue 3;
S. 567
- 576.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
M. Fuhrmann, N. Euler-Rolle, M. Killian, M. Reinwald, S. Jakubek:
"Longitudinal tunnel ventilation control. Part 2: Non-linear observation and disturbance rejection";
Control Engineering Practice,
63
(2017),
S. 44
- 56.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
A.L. Gratzer, S. Thormann, A. Schirrer, S. Jakubek:
"String Stable and Collision-Safe Model Predictive Platoon Control";
angenommen für IEEE Transactions on Intelligent Transportation Systems
(2022),
16 S.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Hametner, L. Böhler, M. Kozek, J. Bartlechner, O. Ecker, Z. P. Du, R. Kölbl, M. Bergmann, T. Bachleitner-Hofmann, S. Jakubek:
"Intensive care unit occupancy predictions in the COVID-19 pandemic based on age-structured modelling and differential flatness";
Nonlinear Dynamics,
109
(2022),
S. 57
- 75.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Hametner, J. Edelmann, S. Jakubek, W. Mack:
"An advanced algorithm for partitioning and parameter estimation in local model networks and its application to vehicle vertical dynamics";
Acta Mechanica (eingeladen),
223
(2012),
8;
S. 1693
- 1706.
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Hametner, S. Jakubek:
"Local Model Network Identification for Online Engine Modelling";
Information Sciences,
220
(2013),
S. 210
- 225.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Hametner, S. Jakubek:
"Nonlinear Identification with Local Model Networks Using GTLS Techniques and Equality Constraints";
IEEE Transactions On Neural Networks,
22
(2011),
9;
S. 1406
- 1418.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Hametner, S. Jakubek:
"State of charge estimation for Lithium Ion cells: Design of experiments, nonlinear identification and fuzzy observer design";
Journal of Power Sources,
238
(2013),
S. 413
- 421.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Hametner, S. Jakubek, W. Prochazka:
"Data-driven design of a cascaded observer for battery state of health estimation";
IEEE Transactions on Industry Applications (eingeladen),
54
(2018),
6;
S. 6258
- 6266.
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Hametner, M. Kozek, L. Böhler, A. Wasserburger, Z. P. Du, R. Kölbl, M. Bergmann, T. Bachleitner-Hofmann, S. Jakubek:
"Estimation of exogenous drivers to predict COVID-19 pandemic using a method from nonlinear control theory";
Nonlinear Dynamics,
106
(2021),
S. 1111
- 1125.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Hametner, C. Mayr, S. Jakubek:
"Dynamic NOx emission modelling using local model networks";
International Journal of Engine Research,
15
(2014),
S. 928
- 933.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Hametner, C. Mayr, M. Kozek, S. Jakubek:
"PID controller design for nonlinear systems represented by discrete-time local model networks";
International Journal of Control,
86
(2013),
9;
S. 1453
- 1466.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Hametner, C. Mayr, M. Kozek, S. Jakubek:
"Stability analysis of data-driven local model networks";
Mathematical and Computer Modelling of Dynamical Systems,
20
(2014),
3;
S. 224
- 247.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Hametner, M. Stadlbauer, Maxime Deregnaucourt, S. Jakubek:
"Incremental optimal process excitation for online system identification based on evolving local model networks";
Mathematical and Computer Modelling of Dynamical Systems,
19
(2013),
6;
S. 505
- 525.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Hametner, M. Stadlbauer, Maxime Deregnaucourt, S. Jakubek, T. Winsel:
"Optimal experiment design based on local model networks and multilayer perceptron networks";
Engineering Applications of Artificial Intelligence,
26
(2013),
S. 251
- 261.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
S. Helm, M. Kozek, S. Jakubek:
"Combustion Torque Estimation and Misfire Detection for Calibration of Combustion Engines by Parametric Kalman Filtering";
IEEE Transactions on Industrial Electronics (eingeladen),
59
(2012),
11;
S. 4326
- 4337.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
S. Jakubek, A. Fleck:
"Schätzung des inneren Drehmoments von Verbrennungsmotoren durch parameterbasierte Kalmanfilterung";
at - Automatisierungstechnik (eingeladen),
57
(2009),
8;
S. 395
- 402.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
S. Jakubek, C. Hametner:
"Identification of Neurofuzzy Models Using GTLS Parameter Estimation";
IEEE Transactions on Systems, Man, and Cybernetics,
39
(2009),
5;
S. 1121
- 1133.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
S. Jakubek, C. Hametner, N. Keuth:
"Total least squares in fuzzy system identification: An application to an industrial engine";
Engineering Applications of Artificial Intelligence,
21
(2008),
8;
S. 1277
- 1288.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
S. Jakubek, C. Hametner, N. Keuth, A. Voigt:
"Neue Methoden für die dynamische Identifikation mit Neuro-Fuzzy Netzen";
Automatisierungstechnik (at),
10
(2006),
S. 486
- 494.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
S. Jakubek, N. Keuth:
"A Local Neuro-Fuzzy Network for High-Dimensional Models and Optimisation";
Engineering Applications of Artificial Intelligence,
19
(2006),
S. 705
- 717.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
S. Jakubek, N. Keuth:
"Optimierte Neuro-Fuzzy-Modelle für Auslegungsprozesse und Simulation im Automotive-Bereich";
Automatisierungstechnik (at),
53
(2005),
9;
S. 425
- 433.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
S. Jakubek, N. Keuth, F Bamer:
"Ein erweitertes, adaptives Kraftstoffzuteilungskonzept für den Ottomotor (Extended Nonlinear-Adaptive Engine Fuel Supply Control for Spark Ignition Engines) ";
Automatisierungstechnik (at),
03
(2004),
S. 127
- 135.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
S. Jakubek, E. Luchini, A. Oberhummer, F. Pfister:
"A model-based interfacing concept for accurate power hardware-in-the-loop systems";
Mathematical and Computer Modelling of Dynamical Systems,
Volume 22
(2016),
Issue 1;
S. 1
- 20.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
S. Jakubek, A. Schirrer, G. Aschauer, C. Saliger:
"Keeping Contact at 300 km/h";
dSPACE Magazine,
1
(2016),
S. 26
- 31.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
S. Jakubek, A. Schirrer, G. Aschauer, C. Saliger:
"Kontaktsport bei 300 km/h";
dSPACE Magazin (eingeladen),
1
(2016),
S. 26
- 31.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
S. Jakubek, M Seyr, G. Novak:
"Autonomous Mobile Robot Proprioceptive Navigation and Predictive Trajectory Tracking";
International Journal of Control,
81
(2008),
6;
S. 989
- 1001.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
S. Jakubek, T. Strasser:
"Artificial neural networks for fault detection in large-scale data acquisition systems";
Engineering Applications of Artificial Intelligence (eingeladen),
17
(2004),
3;
S. 233
- 248.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
J. Kancsár, M. Kozek, S. Jakubek:
"Flatness-based feedforward control of polymer electrolyte membrane fuel cell gas conditioning system";
International Journal of Hydrogen Energy,
41
(2016),
39;
S. 17526
- 17538.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
J. Kancsár, M. Striednig, D. Aldrian, A. Trattner, M. Klell, C. Kügele, S. Jakubek:
"A novel approach for dynamic gas conditioning for PEMFC stack testing";
International Journal of Hydrogen Energy,
42
(2017),
S. 28898
- 28909.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
L. Kasper, D. Pernsteiner, M. Koller, A. Schirrer, S. Jakubek, R. Hofmann:
"Numerical studies on the influence of natural convection under inclination on optimal aluminium proportions and fin spacings in a rectangular aluminium finned latent-heat thermal energy storage";
Applied Thermal Engineering,
190
(2021).
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
O. König, G. Gregorčič, S. Jakubek:
"Model predictive control of a DC-DC converter for battery emulation";
Control Engineering Practice,
21
(2013),
4;
S. 428
- 440.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
O. König, C. Hametner, S. Jakubek, G. Prochart:
"Datengetriebene Batteriemodelle zur Emulation des Impedanzverhaltens von Traktionsbatterien";
e & i Elektronik und Informationstechnik (eingeladen),
132
(2015),
8;
S. 469
- 473.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
O. König, C. Hametner, G. Prochart, S. Jakubek:
"Battery Emulation for Power-HIL Using Local Model Networks and Robust Impedance Control";
IEEE Transactions on Industrial Electronics,
61
(2014),
2;
S. 943
- 955.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Kozlik, B. Geringer, A. Schirrer, S. Jakubek:
"Dynamic matrix control applied to emission control of a diesel engine";
International Journal of Engine Research,
17
(2016),
5;
S. 556
- 575.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
A. Kravos, D. Ritzberger, C. Hametner, S. Jakubek, T. Katrasnik:
"Methodology for efficient parametrisation of electrochemical PEMFC model for virtual observers: Model based optimal design of experiments supported by parameter sensitivity analysis";
International Journal of Hydrogen Energy,
(*)
(2020),
(*);
S. ##
- (*).
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
A. Kravos, D. Ritzberger, G. Tavcar, C. Hametner, S. Jakubek, T. Katrasnik:
"Thermodynamically consistent reduced dimensionality electrochemical model for proton exchange membrane fuel cell performance modelling and control";
Journal of Power Sources,
454
(2020),
227930.
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
A. Kregar, P. Frühwirt, D. Ritzberger, S. Jakubek, T. Katrasnik, G. Gescheidt:
"Sensitivity Based Order Reduction of a Chemical Membrane Degradation Model for Low-Temperature Proton Exchange Membrane Fuel Cells";
ENERGIES,
13(21)
(2020),
5611;
S. ##.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
M. Krommer, S. Jakubek, M. Kaltenbacher, H. Schmiedmayer:
"Mechanik: Grundlage moderner mechatronischer Systeme";
ÖIAZ,
161
(2016),
1;
S. 181
- 187.
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
E. Luchini, D. Radler, D. Ritzberger, S. Jakubek, M. Kozek:
"Model predictive temperature control and ageing estimation for an insulated cool box";
Applied Thermal Engineering,
144
(2018),
S. 269
- 277.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
E. Luchini, A. Schirrer, S. Jakubek, M. Kozek:
"Model predictive multirate control for mixed-integer optimisation of redundant refrigeration circuits";
Journal of Process Control (eingeladen),
76
(2019),
S. 112
- 121.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Mayr, N. Euler-Rolle, M. Kozek, C. Hametner, S. Jakubek:
"Engine Control Unit PID Controller Calibration by means of Local Model Networks";
Control Engineering Practice,
33
(2014),
S. 125
- 135.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
D. Murschenhofer, D. Kuzdas, S. Braun, S. Jakubek:
"A real-time capable quasi-2D proton exchange membrane fuel cell model";
Energy Conversion and Management,
162
(2018),
S. 159
- 175.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
D. Pernsteiner, V. Halmschlager, A. Schirrer, R. Hofmann, S. Jakubek:
"Efficient sensitivity-based cooperation concept for hierarchical multi-layer process automation of steam-powered plants";
IEEE Access,
10
(2022),
S. 66844
- 66861.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
D. Pernsteiner, L. Kasper, A. Schirrer, R. Hofmann, S. Jakubek:
"Co-simulation methodology of a hybrid latent-heat thermal energy storage unit";
Applied Thermal Engineering,
178
(2020).
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
D. Pernsteiner, A. Schirrer, L. Kasper, R. Hofmann, S. Jakubek:
"Data-based model reduction for phase change problems with convective heat transfer";
Applied Thermal Engineering,
184
(2021),
116228.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
D. Pernsteiner, A. Schirrer, L. Kasper, R. Hofmann, S. Jakubek:
"State estimation concept for a nonlinear melting/solidification problem of a latent heat thermal energy storage";
Computers & Chemical Engineering,
153
(2021),
S. 107444.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
R. Priesner, S. Jakubek:
"Mechanical Impedance Control of Rotatory Test Beds";
IEEE Transactions on Industrial Electronics,
61
(2014),
11;
S. 6264
- 6274.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
D. Ritzberger, C. Hametner, S. Jakubek:
"A Real-Time Dynamic Fuel Cell System Simulation for Model-Based Diagnostics and Control: Validation on Real Driving Data";
ENERGIES,
13(12)
(2020),
3148;
S. ##.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
D. Ritzberger, J. Höflinger, Z. P. Du, C. Hametner, S. Jakubek:
"Data-Driven Parameterization of Polymer Electrolyte Membrane Fuel Cell Models via Simultaneous Local Linear Structured State Space Identification";
International Journal of Hydrogen Energy,
46
(2021),
21;
S. 11878
- 11893.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
D. Ritzberger, S. Jakubek:
"Nonlinear data-driven identification of polymer electrolyte membrane fuel cells for diagnostic purposes: A Volterra series approach";
Journal of Power Sources,
361
(2017),
S. 144
- 152.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
D. Ritzberger, A. Schirrer, S. Jakubek:
"Absorbing boundary layer control for linear one-dimensional wave propagation problems";
Journal of Vibration and Control,
(2016).
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
D. Ritzberger, M. Striednig, Christoph Simon, C. Hametner, S. Jakubek:
"Online estimation of the electrochemical impedance of polymer electrolyte membrane fuel cells using broad-band current excitation";
Journal of Power Sources,
405
(2018),
S. 150
- 161.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
A. Schirrer, G. Aschauer, M. Kozek, S. Jakubek:
"Power-HIL-Emulation der Dynamik einer Zug-Oberleitung mittels Echtzeit-Finite-Elemente-Modell in bewegten Koordinaten und modellprädiktiver Regelung";
at - Automatisierungstechnik (eingeladen),
68
(2020),
8;
S. 641
- 653.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
A. Schirrer, G. Aschauer, E. Talic, M. Kozek, S. Jakubek:
"Catenary emulation for hardware-in-the-loop pantograph testing with a model predictive energy-conserving control algorithm";
Mechatronics,
41
(2017),
S. 17
- 28.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
A. Schirrer, E. Talic, G. Aschauer, M. Kozek, S. Jakubek:
"Optimization based determination of highly absorbing boundary conditions for linear finite difference schemes";
Journal of Sound and Vibration,
365
(2016),
S. 45
- 69.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
E. Talic, A. Schirrer, M. Kozek, S. Jakubek:
"Multi-objective parameter identification of Euler-Bernoulli beams under axial load";
Journal of Sound and Vibration,
341
(2015),
S. 86
- 99.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
E. Thonhofer, S. Jakubek:
"Investigation of Stochastic Variation of Parameters for a Macroscopic Traffic Model";
Journal of Intelligent Transportation Systems,
22
(2018),
6;
S. 547
- 564.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
E. Thonhofer, E. Luchini, S. Jakubek:
"A flexible, adaptive traffic network simulation with parameter estimation";
Journal of Intelligent Transportation Systems,
21
(2017),
1;
S. 63
- 77.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
E. Thonhofer, T. Palau, A. Kuhn, S. Jakubek, M. Kozek:
"Macroscopic traffic model for large scale urban traffic network design";
Simulation Modelling Practice and Theory,
80
(2018),
S. 32
- 49.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
S. Thormann, A. Schirrer, S. Jakubek:
"Safe and Efficient Cooperative Platooning";
IEEE Transactions on Intelligent Transportation Systems,
23
(2020),
2;
S. 1
- 13.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
D. Tumpold, M. Stark, N. Euler-Rolle, M. Kaltenbacher, S. Jakubek:
"Linearizing an electrostatically driven MEMS speaker by applying pre-distortion";
Sensors and Actuators A: Physical,
236
(2015),
S. 289
- 298.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
J. Unger, C. Hametner, S. Jakubek, M. Quasthoff:
"A novel methodology for non-linear system identification of battery cells used in non-road HEV";
Journal of Power Sources,
269
(2014),
S. 883
- 897.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
J. Unger, M. Kozek, S. Jakubek:
"Nonlinear model predictive energy management controller with load and cycle prediction for non-road HEV";
Control Engineering Practice,
36
(2015),
S. 120
- 132.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
J. Unger, M. Kozek, S. Jakubek:
"Reduced Order Optimization For Model Predictive Control Using Principal Control Moves";
Journal of Process Control,
22
(2012),
1;
S. 272
- 279.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
M. Vrlic, D. Ritzberger, S. Jakubek:
"Model-Predictive-Control-Based Reference Governor for Fuel Cells in Automotive Application Compared with Performance from a Real Vehicle";
ENERGIES,
14(8)
(2021),
2206;
S. ##.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
M. Vrlic, D. Ritzberger, S. Jakubek:
"Safe and Efficient Polymer Electrolyte Membrane Fuel Cell Control Using Successive Linearization Based Model Predictive Control Validated on Real Vehicle Data";
ENERGIES,
13(20)
(2020),
5353;
S. ##.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
A. Wasserburger, O. König, S. Jakubek:
"Estimation and compensation of DC-Link voltage disturbances in a DC-DC converter for battery emulation";
International Journal of Control,
93
(2020),
4;
S. 922
- 933.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
M. Zauner, P. Mandl, C. Hametner, O. König, S. Jakubek:
"Flatness-Based Discrete-Time Control of a Battery Emulator Driving a Constant Power Load";
IEEE Journal of Emerging and Selected Topics in Power Electronics,
9
(2021),
6;
S. 6864
- 6874.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
M. Zauner, P. Mandl, O. König, C. Hametner, S. Jakubek:
"Stability Analysis of a Flatness-Based Controller Driving a Battery Emulator with Constant Power Load";
at - Automatisierungstechnik (eingeladen),
69
(2021),
2;
S. 142
- 154.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
S. Zendegan, A. Ferrara, S. Jakubek, C. Hametner:
"Predictive Battery State of Charge Reference Generation Using Basic Route Information for Optimal Energy Management of Heavy-Duty Fuel Cell Vehicles";
IEEE Transactions on Vehicular Technology,
70
(2021),
S. 12517
- 12528.
Zusätzliche Informationen
Buchbeiträge:
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Hametner, S. Jakubek:
"Data-driven methodologies for battery state-of-charge observer design";
in: "Automotive Battery Technology",
herausgegeben von: Alexander Thaler; Daniel Watzenig;
Springer-Verlag,
Wien,
2014, (eingeladen),
ISBN: 978-3-319-02522-3,
S. 111
- 125.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Hametner, S. Jakubek:
"Nonlinear System Identification through Local Model Approaches: Partitioning Strategies and Parameter Estimation";
in: "Modelling, Simulation and Identification",
A. Mohamed (Hrg.);
Sciyo,
Rijeka,
2010, (eingeladen),
ISBN: 978-953-307-136-7,
S. 179
- 194.
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Hametner, S. Jakubek:
"On the Potential of Constraints in Nonlinear System Identification";
in: "Advanced Dynamics and Model-Based Control of Structures and Machines",
herausgegeben von: Irschik, Hans; Krommer, Michael; Belyaev, Alexander K.;
Springer-Verlag,
Wien,
2011, (eingeladen),
ISBN: 978-3-7091-0796-6,
S. 93
- 102.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
S. Jakubek, M. Kozek:
"Controls and Identification";
in: "Road and Off-Road Vehicle System Dynamics Handbook",
G. Mastinu, M. Plöchl (Hrg.);
CRC Press,
2014, (eingeladen),
ISBN: 9780849333224,
S. 159
- 219.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
M. Killian, A. Schirrer, S. Jakubek, M. Kozek:
"Energiemanagement in Gebäuden und Smart Grids - optimale Echtzeit Lösungen";
in: "Lifestyle vs. Vernunft, Entwicklung künftiger Energie- und Verkehrssysteme",
43;
herausgegeben von: Verein für Ökologie und Umweltforschung;
facultas Universitätsverlag & maudrich,
facultas Universitätsverlag, Wien, Austria,
2018, (eingeladen),
ISBN: 978-3-7089-1658-3,
S. 51
- 70.
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
A. Schirrer, G. Aschauer, S. Jakubek:
"Hardware-in-the-Loop Testing of High-Speed Pantographs Using Real-Time Catenary Emulation";
in: "Dynamics and Control of Advanced Structures and Machines",
H. Irschik, A. Belyaev, M. Krommer (Hrg.);
Springer International Publishing,
Switzerland,
2016,
ISBN: 978-3-319-43079-9,
S. 75
- 83.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
A. Schirrer, G. Aschauer, S. Jakubek:
"High-Dynamic Accurate Railway Catenary Emulation by Real-Time Mechanical Impedance Control for Pantograph Testing";
in: "Simulation and Testing for Vehicle Technology",
C. Gühmann, J. Riese, K. von Rüden (Hrg.);
Springer International Publishing,
Switzerland,
2016,
ISBN: 978-3-319-32344-2,
S. 277
- 295.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
A. Schirrer, M. Kozek, S. Jakubek:
"Convex Design for Lateral Control of a Blended Wing Body Aircraft";
in: "Mechanics and Model-Based Control of Advanced Engineering Systems",
A. Belyaev, H. Irschik, M. Krommer (Hrg.);
Springer-Verlag,
Wien,
2014,
ISBN: 9783709115701,
S. 255
- 263.
Beiträge in Tagungsbänden:
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
G. Aschauer, A. Schirrer, M. Kozek, S. Jakubek:
"Realtime-capable FE-based railway catenary emulation via pantograph test rig impedance control";
in: "Proceedings of the 20th IFAC World Congress",
herausgegeben von: Elsevier;
IFAC-PapersOnLine,
2017,
S. 8636
- 8641.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
A. Schirrer, G. Aschauer, S. Jakubek:
"Comparison of real-time models for high-fidelity hardware-in-the-loop catenary emulation in a high-dynamic pantograph test rig";
in: "X International Conference on Structural Dynaics, EURODYN 2017",
199;
herausgegeben von: Procedia Engineering;
Elsevier,
2017,
S. 3290
- 3295.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
M. Stadlbauer, N. Didcock, C. Hametner, S. Jakubek, A. Rainer, H. Koegeler:
"Online Design of Experiments in the Relevant Output Range";
in: "Design of Experiments (DoE) in Engine Development",
expert verlag,
2013,
ISBN: 978-3-8169-3217-8,
S. 43
- 58.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
M. Vrlic, S. Jakubek:
"Degradation Avoiding Start Up and Shut Down of Fuel Cell Stacks for Automotive Application Using Two Plant Model Predictive Control";
in: "2021 6th International Conference on Smart and Sustainable Technologies (SpliTech)",
IEEE,
2021,
ISBN: 978-953-290-112-2,
S. ##.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
M. Vrlic, D. Ritzberger, S. Jakubek:
"Efficient and life preserving power tracking control of a proton exchange membrane fuel cell using model predictive control";
in: "2020 SICE International Symposium on Control Systems (SICE ISCS)",
IEEE,
2020,
ISBN: 978-4-907764-64-7,
S. 77
- 84.
Zusätzliche Informationen
Vorträge und Posterpräsentationen (mit Tagungsband-Eintrag):
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
G. Aschauer, A. Schirrer, S. Jakubek:
"Realtime-capable finite element model of railway catenary dynamics in moving coordinates";
Vortrag: IEEE Multi-Conference on Systems and Control 2016,
Buenos Aires;
19.09.2016
- 22.09.2016; in: "2016 IEEE Conference on Control Applications (CCA)",
(2016),
S. 1078
- 1083.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
L. Bitschnau, S. Jakubek, M. Kozek:
"Constrained Model Predictive Control Of A Continuous Annealing Furnace";
Vortrag: 2010 ASME Dynamic Systems and Control Conference,
Cambridge, USA;
13.09.2010
- 15.09.2010; in: "Proceedings ASME Dynamic Systems and Control Conference",
(2010),
ISBN: 978-0-7918-3884-6;
8 S.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
L. Bitschnau, M. Kozek, S. Jakubek, F. Leeber:
"Implementation of Model Predictive Control in an Industrial Continuous Annealing Furnace";
Vortrag: Control and Applications 2011,
Vancouver;
01.06.2011
- 03.06.2011; in: "Iaested Ca 2011",
Canada, Calgary
(2011),
Paper-Nr. 729-045,
8 S.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
G. Brantner, G. Fuchs, A. Schirrer, S. Jakubek:
"A Detalied Nonlinear Dynamic Model of a 3-DOF Laboratory Helicopter for Control Design";
Vortrag: MATHMOD 2012 - 7th Vienna International Conference on Mathematical Modelling,
Wien/AT;
15.02.2012
- 17.02.2012; in: "Preprints Mathmod 2012 Vienna - Full Paper Volume",
I. Troch, F. Breitenecker (Hrg.);
Argesim / Asim,
38
(2012),
S. 51
- 52.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
Maxime Deregnaucourt, M. Stadlbauer, C. Hametner, S. Jakubek, J. Wurzenberger:
"Nonlinear conjugate gradient algorithm for model based design of experiments";
Vortrag: 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012),
University of Vienna;
10.09.2012
- 14.09.2012; in: "Proceedings of 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)",
(2012).
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
N. Didcock, S. Jakubek, C. Hametner, H. Altenstrasser, A. Dragoti, N. Keuth:
"Lookup Table Optimisation For Engineering Applications";
Vortrag: 8th Conference Design of Experiments (DoE) in Powertrain Development,
Berlin;
11.06.2015
- 12.06.2015; in: "Design of Experiments (DoE) in Engine Developement",
K. Röpke, C. Gühmann (Hrg.);
Expert Verlag,
8/Renningen, Deutschland
(2015),
ISBN: 978-3-8169-3316-8;
11 S.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
D. Erdogan, S. Jakubek, C. Hametner:
"Model Predictive Control and Disturbance Compensation for Engine Test Beds";
Vortrag: IEEE Conference on Industrial Electronics and Applications (ICIEA),
Norway;
09.11.2020
- 13.11.2020; in: "IEEE Conference on Industrial Electronics and Applications (ICIEA)",
IEEE Conference on Industrial Electronics and Applications (ICIEA),
(2020),
ISBN: 978-1-7281-5168-7;
S. 7
- 12.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
N. Euler-Rolle, C. Bammer, M. Reinwald, S. Jakubek:
"Model based dynamic feedforward control of longitudinal tunnel ventilation";
Vortrag: Tunnel Safety and Ventilation - New Developments in Tunnel Safety,
Graz;
25.04.2016
- 26.04.2016; in: "8th International Conference on Tunnel Safety and Ventilation",
(2016),
ISBN: 9783851254648;
S. 212
- 219.
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
N. Euler-Rolle, C. Hametner, S. Jakubek:
"Automated generation of a dynamic feedforward control law using local model networks with disturbance inputs";
Vortrag: 86th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM),
Lecce, Italy;
23.03.2015
- 27.03.2015; in: "Proceedings in Applied Mathematics and Mechanics (PAMM)",
Wiley, Weinheim,
15 (1)
(2015),
ISSN: 1617-7061;
S. 629
- 630.
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
N. Euler-Rolle, C. Hametner, S. Jakubek:
"Automatic Generation of Feedforward Controllers using Dynamic Local Model Networks";
Vortrag: 19th IFAC World Congress,
Cape Town, South Africa;
24.08.2014
- 29.08.2014; in: "Proc. of 19th IFAC World Congress",
(2014),
S. 3128
- 3133.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
N. Euler-Rolle, S. Jakubek:
"Longitudinal tunnel ventilation control: Dynamic feedforward control and non-linear disturbance observation";
Vortrag: 20. Steirisches Seminar über Regelungstechnik und Prozessautomatisierung,
Schloss Retzhof, Leitring/Wagna, Austria (eingeladen);
11.09.2017
- 13.09.2017; in: "20. Steirisches Seminar über Regelungstechnik und Prozessautomatisierung",
(2017),
S. 40
- 41.
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
W. Falmbigl, S. Jakubek, O. König, G. Prochart:
"Predictive Pulse Pattern Control for a Synchronous Multiphase Buck Converter";
Vortrag: 4th Symposium on Predictive Control of Electrical Drives and Power Electronics PRECEDE 2017,
Pilsen, Czech Republic;
04.09.2017
- 06.09.2017; in: "Proceedings 2017 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics (PRECEDE)",
(2017),
S. 60
- 65.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
A. Ferrara, M. Okoli, S. Jakubek, C. Hametner:
"Energy Management of Heavy-Duty Fuel Cell Electric Vehicles: Model Predictive Control for Fuel Consumption and Lifetime Optimization";
Vortrag: 21st IFAC World Congress,
Berlin;
11.07.2020
- 19.07.2020; in: "Ifac Wc 2020",
IFAC-PapersOnLine,
Volume 53, Issue 2, 2020, Pages 14205-14210
(2020),
S. 14205
- 14210.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
M. Fichtinger, E. Talic, A. Schirrer:
"Quantification of phase and runtime errors in finite difference approximations of railway catenary systems";
Vortrag: 8th European Nonlinear Dynamics Conference ENOC 2014,
Wien;
06.07.2014
- 11.07.2014; in: "ENOC 2014",
H. Ecker, A. Steindl, S. Jakubek (Hrg.);
ENOC 2014 - Proceedings of 8th European Nonlinear Dynamics Conference,
(2014),
ISBN: 978-3-200-03433-4.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
G. Fuchs, A. Steindl, S. Jakubek:
"Order Reduction for a Realtime Engine Model Using Flat and Nonlinear Galerkin Methods";
Vortrag: European Conference of Systems (ECS '10),
Puerto de la Cruz;
30.11.2010
- 02.12.2010; in: "Advances in Communications, Computers, Systems, Circuits and Devices",
V. Mladenov, K. Psarris, N. Mastorakis, A. Caballero, G. Vachtsevanos (Hrg.);
WSEAS Press,
(2010),
ISBN: 978-960-474-250-9;
S. 255
- 260.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
F. Fuhrmann, A. Schirrer, M. Kozek, S. Jakubek:
"Prediction of pulsed heat loads in manufacturing plants";
Vortrag: IFAC World Congress 2020,
Berlin;
11.07.2020
- 17.07.2020; in: "IFAC-PapersOnLine",
IFAC-PapersOnLine,
Volume 53, Issue 2
(2020),
S. 10449
- 10454.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Hametner, S. Jakubek:
"Combustion Engine Modelling using an Evolving Local Model Network";
Vortrag: 2011 IEEE International Conference On Fuzzy Systems,
Taipei, Taiwan;
27.06.2011
- 30.06.2011; in: "Proceedings of the 2011 IEEE International Conference On Fuzzy Systems",
(2011),
ISBN: 978-1-4244-7316-8;
S. 2802
- 2807.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Hametner, S. Jakubek:
"Comparison of EM Algorithm and Particle Swarm Optimisation for Local Model Network Training";
Vortrag: 2010 IEEE Conference on Cybernetics and Intelligent Systems (CIS),
Singapur;
28.06.2010
- 30.06.2010; in: "Proceedings of the 2010 IEEE Conference on Cybernetics and Intelligent Systems (CIS)",
(2010),
6 S.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Hametner, S. Jakubek:
"Engine Model Identification Using Local Model Networks in Comparison with a Multilayer Perceptron Network";
Vortrag: International Symposium on Models and Modeling Methodologies in Science and Engineering: MMMse 2011,
Orlando, Florida, USA;
27.03.2011
- 30.03.2011; in: "Proceedings of the International Symposium on Models and Modeling Methodologies in Science and Engineering in Science and Engineering (MMMSE 2011)",
(2011),
ISBN: 9781936338221.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Hametner, S. Jakubek:
"Fuzzy Observer Design for Local Model Network based Battery State of Charge Estimation";
Vortrag: 21st Mediterranean Conference on Control & Automation,
Platanias-Chania, Crete, Greece;
25.06.2013
- 28.06.2013; in: "Proceedings of the 21st Mediterranean Conference on Control & Automation",
(2013),
ISBN: 978-1-4799-0995-7;
S. 265
- 270.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Hametner, S. Jakubek:
"Neuro-Fuzzy Modelling Using a Logistic Discriminant Tree";
Vortrag: American Control Conference 2007,
New York City, USA;
11.07.2007
- 13.07.2007; in: "Proceedings of the 2007 American Control Conference",
(2007),
ISBN: 1-4244-0989-6;
Paper-Nr. WeB04.6,
6 S.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Hametner, S. Jakubek:
"New concepts for the identification of dynamic Takagi-Sugeno Fuzzy models";
Vortrag: 2nd IEEE International Conference on Cybernetics & Intelligent Systems,
Bangkok, Thailand;
07.06.2006
- 09.06.2006; in: "2nd IEEE International Conference on Cybernetics & Intelligent Systems",
(2006),
ISBN: 1-4244-0023-6;
Paper-Nr. P0253,
6 S.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Hametner, S. Jakubek:
"Nonlinear Dynamic MISO Identification in a Complex Noisy Environment";
Vortrag: Chinese Control Conference,
Kunming, Yunnan, China;
16.07.2008
- 18.07.2008; in: "Proceedings of the 27th Chinese Control Conference",
(2008),
ISBN: 9787900719706;
6 S.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Hametner, S. Jakubek:
"Optimisation Of Relative Error Criteria In Nonlinear Neuro-Fuzzy Identification";
Vortrag: 20th IASTED International Conference "Modelling and Simulation",
Banff;
06.07.2009
- 08.07.2009; in: "Proceedings of the 20th IASTED International Conference "Modelling and Simulation"",
(2009),
ISBN: 978-0-88986-799-4;
Paper-Nr. 670-071,
6 S.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Hametner, S. Jakubek:
"Spezielle Parameterschätzverfahren in lokalen Modellnetzwerken zur Identifikation nichtlinearer Systeme";
Vortrag: GAMM-GMA Tagung,
Salzburg;
23.09.2009
- 25.09.2009; in: "Modellbildung, Identfikation und Simulation in der Automatisierungstechnik",
B. Lohmann, A. Kugi (Hrg.);
(2009),
16 S.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Hametner, S. Jakubek, N. Keuth, H. Pflügl:
"Dynamic Engine Modelling Using Local Model Networks";
Vortrag: Design of Experiments (DoE) in Engine Developement,
Berlin;
23.05.2011
- 24.05.2011; in: "Design of Experiments (DoE) in Engine Developement",
Expert Verlag,
6/Renningen, Deutschland
(2011),
ISBN: 978-3-8169-3074-7.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Hametner, S. Jakubek, N. Keuth, A. Suljanovic:
"Entwurfsmethodik für nichtlineare Beobachter zur Ladezustandsschätzung von Li-Ionen Batterien";
Vortrag: 5. Internationales Symposium Entwicklungsmethodik,
Wiesbaden;
22.10.2013
- 23.10.2013; in: "5. Internationales Symposium Entwicklungsmethodik",
(2013),
ISBN: 978-3-00-039633-5;
S. 116
- 123.
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Hametner, S. Jakubek, N. Keuth, A. Suljanovic:
"Nonlinear observer design for state of charge estimation of Lithium Ion cells";
Vortrag: The Battery Show & Electric & Hybrid Vehicle Technology Conference,
Novi, Michigan;
17.09.2013
- 19.09.2013; in: "The Battery Show & Electric & Hybrid Vehicle Technology Conference Proceedings",
(2013),
14 S.
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Hametner, S. Jakubek, W. Prochazka:
"Data-driven design of a cascaded observer for battery state of health estimation";
Vortrag: 4th IEEE International Conference on Sustainable Energy Technologies,
Hanoi, Vietnam;
14.11.2016
- 16.11.2016; in: "Proceedings of the 4th IEEE International Conference on Sustainable Energy Technologies",
(2016),
S. 162
- 167.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Hametner, W. Prochazka, S. Jakubek, A. Suljanovic:
"Model based Lithium Ion cell ageing data analysis";
Vortrag: 2014 IEEE International Conference on Fuzzy Systems (FUZZ-IEEE),
Beijing, China;
06.07.2014
- 11.07.2014; in: "Proceedings of the IEEE International Conference on Fuzzy Systems (FUZZ-IEEE 2014)",
(2014),
ISBN: 978-1-4799-2072-3;
S. 962
- 967.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Hametner, J. Unger, S. Jakubek:
"Local Model Network based Dynamic Battery Cell Model Identification";
Vortrag: 12th WSEAS International Conference on ROBOTICS, CONTROL and MANUFACTURING TECHNOLOGY (ROCOM'12),
Rovaniemi Finnland;
18.04.2012
- 20.04.2012; in: "Proceedings of the 12th WSEAS International Conference on ROBOTICS, CONTROL and MANUFACTURING TECHNOLOGY",
(2012),
ISBN: 978-1-61804-085-5;
S. 116
- 123.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
S. Jakubek, C. Hametner:
"Nichtlineare Systemidentifikation durch lokale Modellansätze: Strategien zur Partitionierung und Parameterschätzung";
Vortrag: 16. Steirisches Seminar über Regelungstechnik und Prozessautomatisierung,
Retzhof (eingeladen);
08.09.2009
- 10.09.2009; in: "16. Steirisches Seminar über Regelungstechnik und Prozessautomatisierung",
(2009),
ISBN: 978-3-901439-08-7;
23 S.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
S. Jakubek, N. Keuth:
"A new Training Algorithm for Neuro-Fuzzy Networks";
Vortrag: ICINCO 2005 (2nd internat. Conference on Informatics in Control, Automation and Robotics),
Barcelona;
14.09.2005
- 17.09.2006; in: "Proceedings of the 2005 ICINCO",
(2005).
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
S. Jakubek, M. Kozek:
"Model Predicitve Control in Smart-Grids";
Hauptvortrag: Dritte Fachkonferenz Kommunikation für Energiesysteme: ComForEn 2012,
Wels (eingeladen);
05.09.2012; in: "ComForEn 2012",
F. Kupzog (Hrg.);
Österreichischer Verband für Elektrotechnik,
(2012),
ISBN: 978-3-85133-072-4;
S. 49
- 56.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
S. Jakubek, T. Strasser:
"Fault-Diagnosis Using Neural Networks with Ellipsoidal Basis Funcions";
Vortrag: 2002 American Control Conference,
Anchorage, AK, USA;
08.05.2002
- 10.05.2002; in: "Proceedings of the 2002 American Control Conference",
IEEE,
(2002),
ISBN: 0-7803-7298-0;
S. 3846
- 3851.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
S. Jakubek, T. Strasser:
"Neural Networks applied to Automatic Fault Detection";
Vortrag: 45th IEEE Midwest Symposium on Circuits and Systems (MWSCAS 2002),
Tulsa, OK, USA (eingeladen);
05.08.2002
- 07.08.2002; in: "Proceedings of the 45th IEEE Midwest Symposium on Circuits and Systems (MWSCAS 2002)",
IEEE,
(2002),
ISBN: 0-7803-7523-8;
S. 639
- 642.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Kalteis, S. Thormann, A. Schirrer, S. Jakubek:
"Efficient methods to assess linear and non-linear automotive platoon control: stability and performance";
Vortrag: 11th International Conference on Structural Dynamics, EURODYN 2020,
Athen, Griechenland;
23.11.2020
- 26.11.2020; in: "EURODYN 2020",
National Technical University of Athens (NTUA),
Athens
(2020),
ISBN: 978-618-85072-2-7;
S. 748
- 757.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
O. König, S. Jakubek, G. Prochart:
"Battery Impedance Emulation for Hybrid and Electric Powertrain Testing";
Vortrag: 2012 IEEE Vehicle Power and Propulsion Conference,
Seoul, Korea;
09.10.2012
- 12.10.2012; in: "2012 IEEE Vehicle Power and Propulsion Conference, Oct. 9-12, 2012, Seoul, Korea",
(2012),
S. 627
- 632.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
O. König, S. Jakubek, G. Prochart:
"Einschleifige Impedanzregelung für die Emulation von Traktionsbatterien auf Antriebsprüfständen";
Vortrag: 18. Steirisches Seminar über Regelungstechnik und Prozessautomatisierung,
Schloss Retzhof, Leibnitz, Österreich;
02.09.2013
- 05.09.2013; in: "SSRP 2013: 18. Steirisches Seminar über Regelungstechnik und Prozessautomatisierung",
(2013),
ISBN: 978-3-901439-09-4;
S. 29
- 44.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
O. König, S. Jakubek, G. Prochart:
"Model Predictive Control of a Battery Emulator for Testing of Hybrid and Electric Powertrains";
Vortrag: Vehicle Power and Propulsion Conference (VPPC), 2011 IEEE,
Chicago;
06.09.2011
- 09.09.2011; in: "Vehicle Power and Propulsion Conference (VPPC), 2011 IEEE",
(2011),
ISBN: 978-1-61284-248-6;
6 S.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
O. König, S. Jakubek, G. Prochart:
"Modellprädiktive Regelung eines Batterieemulators";
Vortrag: EMA Nürnberg 2012,
Nürnberg, Deutschland;
21.09.2012
- 22.09.2012; in: "EMA Nürnberg 2012",
(2012),
8 S.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
A. Kravos, D. Ritzberger, G. Tavcar, C. Hametner, S. Jakubek, T. Katrasnik:
"Parameter sensitivity analysis of a thermodynamically consistent electrochemical PEMFC model for virtual observers";
Vortrag: 8th European Fuel Cell Technology & Applications Piero Lunghi Conference - EFC19,
Neapel, Italien;
09.12.2019
- 11.12.2019; in: "Proceedings of EFC2019",
(2019).
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Mayr, N. Euler-Rolle, S. Jakubek:
"Automatic tuning of PID Controllers in Engine Control Units by means of Local Model Networks and Evolutionary Optimization";
Vortrag: 2014 IEEE International Conference on Fuzzy Systems (FUZZ-IEEE),
Beijing, China;
06.07.2014
- 11.07.2014; in: "Proceedings of the 2014 IEEE International Conference on Fuzzy Systems (FUZZ-IEEE)",
(2014),
ISBN: 978-1-4799-2072-3;
S. 901
- 906.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Mayr, A Fleck, S. Jakubek:
"Hybrid Powertrain Control Using Optimization and Cycle Based Predictive Control Algorithms";
Vortrag: International Conference on Control & Automation,
Santiago de Chile;
19.12.2011
- 21.12.2011; in: "Proceedings of the 9th IEEE International Conference on Control & Automation",
(2011),
S. 937
- 944.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Mayr, C. Hametner, S. Jakubek:
"Methoden zur Stabilitätsanalyse von dynamischen lokalen Modellnetzwerken";
Vortrag: GAMM-GMA-Workshop,
Salzburg;
22.09.2010
- 24.09.2010; in: "GMA Fachausschuss 1.30 Workshop in Salzburg/Anif 2010",
B. Lohmann, A. Kugi (Hrg.);
Technische Universität Wien Institut für Automatisierung- und Regelungstechnik,
(2010),
ISBN: 978-3-9502451-7-2;
14 S.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Mayr, C. Hametner, S. Jakubek:
"Nichtlineares PID Reglerdesign mit lokalen Modellnetzwerken";
Vortrag: GMA-Fachausschuss 1.30,
Salzburg;
19.09.2012
- 21.09.2012; in: "GMA-Fachausschuss 1.30 "Modellbildung, Identifikation und Simulation in der Automatisierungstechnik"",
Technische Universität Darmstadt,
(2012),
ISBN: 978-3-9815012-2-3;
S. 11
- 22.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Mayr, C. Hametner, M. Kozek, S. Jakubek:
"Nonlinear Stable PID Controller Design using Local Model Networks";
Vortrag: 20th Mediterranean Conference on Control and Automation 2012,
Barcelona;
03.07.2012
- 06.07.2012; in: "2012 20th Mediterranean Conference on Control & Automation (MED)",
(2012),
S. 842
- 847.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Mayr, C. Hametner, M. Kozek, S. Jakubek:
"Piecewise Quadratic Stability Analysis for Local Model Networks";
Vortrag: Multi-conference on System and Control,
Denver, USA;
28.09.2011
- 30.09.2011; in: "Proceedings of the 2011 IEEE Multi-conference on System and Control",
(2011),
ISBN: 978-1-4577-1062-9;
S. 1418
- 1424.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Mayr, C. Hametner, M. Kozek, S. Jakubek:
"Relaxed Fuzzy Lyapunov Approach for Dynamic Local Model Networks";
Vortrag: 2011 IEEE International Conference On Fuzzy Systems,
Taipei, Taiwan;
27.06.2011
- 30.06.2011; in: "Proceedings of the 2011 IEEE International Conference On Fuzzy Systems",
(2011),
ISBN: 978-1-4244-7315-1;
S. 1546
- 1553.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Mayr, C. Hametner, M. Kozek, S. Jakubek:
"Stability Analysis of PID Controlled Local Model Networks";
Vortrag: IFAC Conference on Advances in PID Control,
Brescia;
28.03.2012
- 30.03.2012; in: "Proceedings of the IFAC Conference on Advances in PID Control",
(2012).
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
D. Murschenhofer, D. Kuzdas, S. Braun, S. Jakubek:
"Development of a real-time capable proton exchange membrane fuel cell model";
Vortrag: 12th European Fluid Mechanics Confererence (EFMC 12),
Technische Universität Wien, Vienna/AT;
09.09.2018
- 12.09.2018; in: "Book of Abstracts",
H.C. Kuhlmann (Hrg.);
(2018),
ISBN: 978-3-200-05859-0;
S. 332.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
N. Paces, A. Voigt, S. Jakubek, A. Schirrer, M. Kozek:
"Combined Control of Combustion Load and Combustion Position in a Moving Grate Biomass Furnace";
Vortrag: 19th Mediterranean Conference on Control and Automation,
Corfu;
20.06.2011
- 23.06.2011; in: "Proceedings of the 19th Mediterranean Conference on Control and Automation",
(2011),
Paper-Nr. ThCT3.7,
6 S.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
M. Quasthoff, J. Unger, S. Jakubek:
"Entwicklungsmethodik eines generischen Batterie-Simulationsmodells und dessen Einsatzmöglichkeiten";
Vortrag: 5. Fachtagung Baumaschinentechnik 2012,
Dresden;
20.09.2012
- 21.09.2012; in: "Baumaschinentechnik 2012 - Energie, Mechatronik, Simulation",
Schriftreihe der Forschungsvereinigung Bau- und Baustoffmaschinen e.V. (FVB),
Heft Nr. 44
(2012),
S. 263
- 284.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
D. Ritzberger, C. Hametner, S. Jakubek:
"Optimal Current Excitation for the Time-Domain Estimation of the Electrochemical Impedance";
Vortrag: IEEE Vehicle Power and Propulsion Conference 2019,
Hanoi, Vietnam;
14.10.2019
- 17.10.2019; in: "2019 IEEE Vehicle Power and Propulsion Conference",
(2019).
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
D. Ritzberger, S. Jakubek:
"Harmonic signal estimation in the time domain for on-line electrochemical impedance spectroscopy";
Vortrag: European Fuel Cell Conference & Exhibition,
Neapel;
12.12.2017
- 15.12.2017; in: "Proceedings of the 7th European fuel cell Piero Lunghi conference",
(2017),
ISBN: 978-88-8286-324-1;
S. 83
- 84.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
D. Ritzberger, A. Schirrer, S. Jakubek:
"Formulating the perfectly matched layer as a control optimization problem";
Vortrag: Polish congress of mechanics - international conference on computer methods in mechanics (PCM-CMM),
Gdansk;
08.09.2015
- 11.09.2015; in: "Pcm-Cmm-2015 Congress Book Of Short Papers (volume 1 & Volume 2)",
(2015),
S. 61
- 62.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
D. Ritzberger, A. Schirrer, S. Jakubek:
"Formulating the perfectly matched layer as a control optimization problem";
Hauptvortrag: VSS Vienna Young Scientists Symposium 2015,
Wien;
25.06.2015
- 26.06.2015; in: "VSS Vienna Young Scientists Symposium",
Book-of-abstracts.com,
(2015),
ISBN: 978-3-9504017-0-7;
S. 48
- 49.
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
R. Schimon, T. Henrion, S. Jakubek, A. Werner, M. Himmelbauer, M. Buchsbaum, K. Haider, M. Haider:
"Methoden zur Verbesserung der Energieeffizienz mittels dynamischer Simulation am Beispiel eines integrierten Hüttenwerks";
Vortrag: ASIM Treffen 2010,
Ulm;
04.03.2010
- 05.03.2010; in: "ASIM Treffen 2010 - Simulation technischer Systeme, Grundlagen und Methoden in Modellbildung und Simulation",
(2010),
ISBN: 978-3-9810998-3-6;
S. 103
- 113.
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
A. Schirrer, T. Hanis, M. Klauco, S. Thormann, M. Hromcik, S. Jakubek:
"Safety-extended Explicit MPC for Autonomous Truck Platooning on Varying Road Conditions";
Vortrag: 21st IFAC World Congress,
Berlin;
12.07.2020
- 17.07.2020; in: "Proceedings of the 21st IFAC World Congress",
(2020),
S. 1
- 6.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
A. Schirrer, S. Jakubek:
"Optimization-based formulations of absorbing boundary conditions in discrete-time wave propagation problems";
Vortrag: 19. Steirisches Seminar über Regelungstechnik und Prozessautomatisierung,
Retzhof (eingeladen);
07.09.2015
- 09.09.2015; in: "19. Steirisches Seminar über Regelungstechnik und Prozessautomatisierung",
(2015).
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
A. Schirrer, J. Mayrhofer, S. Jakubek:
"Accurate piecewise-affine time-discrete modeling of hysteresis-coupled system dynamics";
Vortrag: 18th IFAC Symposium on System Identification SYSID 2018,
Stockholm, Schweden;
09.07.2018
- 11.07.2018; in: "18th IFAC Symposium on System Identification SYSID 2018",
IFAC-PapersOnLine, Elsevier,
51 (15)
(2018),
6 S.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
Chr. Schyr, S. Jakubek, G. Stempfer:
"A New Method of Coupling HiL-Simulation and Engine Testing Based on AUTOSAR-Compliant Control Units";
Vortrag: SAE world congress 2009,
Detroit, Michigan, USA;
20.04.2009
- 23.04.2009; in: "SAE paper",
(2009),
Paper-Nr. 2009-01-1521,
6 S.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
M Seyr, S. Jakubek:
"Dynamic trajectory generation via numerical multi-objective optimisation";
Vortrag: American Control Conference 2007,
New York City, USA;
11.07.2007
- 13.07.2007; in: "Proceedings of the 2007 American Control Conference",
(2007),
ISBN: 1-4244-0989-6;
Paper-Nr. ThB16.4,
6 S.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
M Seyr, S. Jakubek:
"Mobile Robot Predictive Trajectory Tracking";
Vortrag: ICINCO 2005 (2nd internat. Conference on Informatics in Control, Automation and Robotics),
Barcelona;
14.09.2005
- 17.09.2005; in: "Proceedings of the 2005 ICINCO",
INSTICC,
(2005),
ISBN: 972-8865-30-9;
S. 112
- 119.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
M Seyr, S. Jakubek:
"Proprioceptive Navigation, Slip Estimation and Slip Control for Autonomous Wheeled Mobile Robots";
Vortrag: 2nd IEEE International Conference on Robotics, Automation & Mechatronics,
Bangkok, Thailand;
07.06.2006
- 09.06.2006; in: "2nd IEEE International Conference on Robotics, Automation & Mechatronics",
IEEE,
(2006),
ISBN: 1-4244-0025-2;
Paper-Nr. P0251,
6 S.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
M Seyr, S. Jakubek, G. Novak:
"Neural Network Predictive Trajectory Tracking of an Autonomous Two-Wheeled Mobile Robot";
Poster: 16th IFAC World Congress,
Prag;
03.07.2005
- 08.07.2005; in: "Proceedings of the 16th IFAC World Congress",
Elsevier,
(2005).
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
M. Stadlbauer, C. Hametner, Maxime Deregnaucourt, S. Jakubek, T. Winsel:
"Online Measuring Method Using an Evolving Model Based Test Design for Optimal Process Stimulation and Modelling";
Vortrag: 2012 IEEE International Instrumentation and Measurement Technology Conference,
Graz;
13.05.2012
- 16.05.2012; in: "Proceedings of 2012 IEEE International Instrumentation and Measurement Technology Conference",
(2012),
6 S.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
M. Stadlbauer, C. Hametner, S. Jakubek:
"Analytic model based design of experiments for nonlinear dynamic systems with constraints";
Vortrag: 13th IASTED International Conference Control and Applications (CA 2011),
Vancouver, Canada;
01.06.2011
- 03.06.2011; in: "Proceedings of the IASTED International Conference Control and Applications (CA 2011)",
C. de Silva (Hrg.);
ACTA Press,
paper Nr. 729-050
(2011),
S. 20
- 27.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
M. Stadlbauer, C. Hametner, S. Jakubek, T. Winsel:
"Analytic Model Based Design of Experiments";
Vortrag: Design of Experiments (DoE) in Engine Developement,
Berlin;
23.05.2011
- 24.05.2011; in: "Design of Experiments (DoE) in Engine Developements",
(2011),
ISBN: 978-3-8169-3074-7;
S. 13
- 23.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
M. Stadlbauer, C. Hametner, S. Jakubek, T. Winsel:
"Analytic Multilayer Perceptron based Experiment Design for Nonlinear Systems";
Poster: 18th IFAC World Congress,
Milan;
28.08.2011
- 02.09.2011; in: "Proceedings of the 18th IFAC World Congress, 2011",
18th IFAC World Congress / Volume# 18 / Part# 1
(2011),
ISBN: 978-3-902661-93-7;
S. 4332
- 4337.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
A. Steindl, A. Schirrer, S. Jakubek:
"Optimal Control for a Space Rendezvous";
Vortrag: 4th International Workshop on Advanced Dynamics and Model Based Control of Structures and Machines,
JKU Linz;
22.09.2019
- 25.09.2019; in: "Dynamics and Control of Advanced Structures and Machines",
H Irschik, M. Krommer, V. Matveenko, A. Belyaev (Hrg.);
Advanced Structured Materials/Springer, Cham,
156
(2019),
ISBN: 978-3-030-79324-1;
S. 243
- 256.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
J. Strecha, H. Steinrück:
"Vortex Induced Vibrations of a U-beam under two different flow patterns";
Vortrag: 8th European Nonlinear Dynamics Conference ENOC 2014,
Wien;
06.07.2014
- 11.07.2014; in: "ENOC 2014 - Proceedings of 8th European Nonlinear Dynamics Conference",
H. Ecker, A. Steindl, S. Jakubek (Hrg.);
ENOC 2014 - Proceedings of 8th European Nonlinear Dynamics Conference,
(2014),
ISBN: 978-3-200-03433-4;
S. 1
- 6.
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
E. Thonhofer, M. Fuhrmann, S. Jakubek:
"Parameter Identification and Model Validation of a Macroscopic Traffic Model";
Vortrag: IFAC World Congress 2017,
Toulouse;
09.07.2017
- 14.07.2017; in: "IFAC-PapersOnLine",
IFAC-PapersOnLine,
50/1/
(2017),
S. 12835
- 12840.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
E. Thonhofer, S. Jakubek:
"Online Parameter Identification for Traffic Simulation via Lagrangian Sensing";
Vortrag: GAMM 86th Annual Scientific Conference,
Lecche, Italy;
23.03.2015
- 27.03.2015; in: "Proceedings in Applied Mathematics and Mechanics",
Wiley, Weinheim,
15(1)
(2015),
ISSN: 1617-7061;
S. 603
- 604.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
E. Thonhofer, S. Jakubek:
"Online parameter identification for traffic simulation via Eulerian and Lagrangian sensing";
Vortrag: 3rd Polish Congress of Mechanics & 21st Computer Methods in Mechanics,
Gdansk;
08.09.2015
- 11.09.2015; in: "3rd Polish Congress of Mechanics, 21st International Conference on Computer Methods in Mechanics",
Vol. 1
(2015),
ISBN: 978-83-932107-5-6;
S. 65
- 66.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
E. Thonhofer, M. Kozek, S. Jakubek:
"Dynamic Signal Optimization for Traffic Networks";
Poster: IEEE 20th International Conference on Intelligent Transportation Systems,
Yokohama, Japan;
16.10.2017
- 19.10.2017; in: "IEEE Xplore",
(2017),
ISSN: 2153-0017;
S. 1
- 6.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
E. Thonhofer, E. Luchini, A. Kuhn, S. Jakubek:
"Online Parameter Estimation for a Flexible, Adaptive Traffic Network Simulation";
Vortrag: International Conference on Connected Vehicles and Expo 2014,
Wien;
03.09.2014
- 07.09.2014; in: "ICCVE 2014 Conference Proceedings",
(2014).
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
M. Tiefenbacher, S. Jakubek, M. Kozek:
"Modeling and Identification of a Chain Pendulum";
Vortrag: International Symposium on Models and Modeling Methodologies in Science and Engineering: MMMse 2011,
Orlando, Florida, USA;
27.03.2011
- 30.03.2011; in: "Proceedings of the MMMSE2011",
(2011),
ISBN: 9781936338221;
Paper-Nr. MB764KW,
6 S.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
J. Unger, C. Hametner, S. Jakubek, M. Quasthoff:
"Optimal Model Based Design of Experiments Applied to High Current Rate Battery Cells";
Vortrag: IEEE International Conference on Electrical Systems for Aircraft, Railways, Ship Propulsion and Road Vehicles (ESARS 2012 Edition),
Bologna;
16.10.2012
- 18.10.2012; in: "International Conference on Electrical Systems for Aircraft, Railways, Ship Propulsion and Road Vehicles",
(2012),
ISBN: 978-1-4673-1371-1;
6 S.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
J. Unger, M. Kozek, S. Jakubek:
"Verfahren zur Ordnungsreduktion für Modellprädiktive Regelung";
Vortrag: 17. Steirisches Seminar über Regelungstechnik und Prozessautomatisierung,
Schloss Retzhof, Leibnitz, Österreich (eingeladen);
05.09.2011
- 08.09.2011; in: "SSRP 2011",
(2011),
ISBN: 978-3-901439-08-7;
S. 17
- 31.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
A. Wasserburger, N. Didcock, S. Jakubek, C. Hametner:
"Risk Averse Real Driving Emissions Calibration under Uncertainties";
Vortrag: International Conference on Calibration Methods and Automotive Data Analytics,
Berlin, Deutschland;
21.05.2019
- 22.05.2019; in: "International Conference on Calibration Methods and Automotive Data Analytics",
expert verlag GmbH,
Tübingen
(2019),
ISBN: 978-3-8169-3463-9;
S. 211
- 218.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
A. Wurzinger, H. Leibinger, S. Jakubek, M. Kozek:
"Data driven modeling and nonlinear model predictive control design for a rotary cement kiln";
Vortrag: Joint Mechatronics 2019 & NolCoS 2019,
Wien (eingeladen);
04.09.2019
- 06.09.2019; in: "Joint Mechatronics 2019 & NolCoS 2019",
(2019),
Paper-Nr. 176,
6 S.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
M. Zauner, S. Jakubek, C. Hametner:
"Flachheitsbasierte diskrete Regelung eines Batterieemulators für Lasten mit konstanter Leistungsaufnahme";
Vortrag: 54. Regelungstechnisches Kolloquium in Boppard,
Boppard (eingeladen);
04.03.2020
- 06.03.2020; in: "54. Regelungstechnisches Kolloquium in Boppard Programm",
(2020),
S. 23
- 24.
Zusätzliche Informationen
Vorträge und Posterpräsentationen (ohne Tagungsband-Eintrag):
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
N. Didcock, S. Jakubek, N. Keuth:
"Spatial Constraints in Parametric Optimisation";
Poster: Vienna Young Scientists Symposium (VSS) 2015,
Wien;
25.06.2015
- 26.06.2015.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
N. Euler-Rolle, C. Mayr, C. Hametner, S. Jakubek:
"PID Controller Design for Nonlinear Systems Using Discrete-Time Local Model Networks";
Vortrag: 4. Workshop fuer Modellbasierte Kalibriermethoden,
TU Wien;
08.11.2013.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Hametner, S. Jakubek:
"Online SoH/SoC-Schätzung von Li-Ionen Zellen durch nichtlineare Zustandsbeobachtung";
Vortrag: 4. Workshop fuer Modellbasierte Kalibriermethoden,
TU Wien;
08.11.2013.
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Hametner, S. Jakubek:
"SoC-Schätzung von Li-Ionen Zellen: DoE, Identifikation, nichtlineare Zustandsbeobachtung";
Vortrag: 3. Workshop Modellbasierte Kalibriermethoden fuer Automotive-Systeme,
Wien;
22.11.2012.
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Hametner, W. Prochazka, A. Suljanovic, S. Jakubek:
"Data Driven Methodologies for State of Health Observer Design for Lithium Ion Cells";
Vortrag: 4th International Symposium on Energy Challenges & Mechanics,
Aberdeen, Scotland, UK (eingeladen);
11.08.2015
- 13.08.2015.
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
S. Jakubek, G. Aschauer, A. Schirrer, W. Tenschert, C. Saliger:
"Hardware-in-the-loop Prüfstand für Stromabnehmer von Hochgeschwindigkeitszügen mit Emulation der Oberleitungsdynamik";
Vortrag: Mechatroniktag des Instituts für Mechanik und Mechatronik 2015,
Wien;
30.10.2015.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
S. Jakubek, C. Hametner:
"On the potential of constraints in nonlinear system identification";
Vortrag: Russia - Austria Joint Workshop on Advanced Dynamics and Model Based Control of Structures and Machines,
Linz (eingeladen);
25.04.2010
- 28.04.2010.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
S. Jakubek, M. Kozek, A. Schulz, J. Wassermann:
"Regelungstechnik und Mechatronik im Plusenergiehaus";
Vortrag: Plusenergiehäuser der Zukunft, Informationsveranstaltung für Firmen der TU-Wien in Kooperation mit der Wirtschaftskammer Wien zum Stand der Technik an der TU Wien im Bereich der "energieaktiven Siedlungen",
Wien;
16.04.2010.
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
M. Kozek, A. Schirrer, S. Jakubek:
"Robust convex synthesis for lateral feedback control of a blended wing body aircraft";
Vortrag: International Conference on Advanced Dynamics and Model Based Control of Structures and Machines,
St.Petersburg, Russia (eingeladen);
01.07.2012
- 04.07.2012.
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
M. Krommer, M. Kaltenbacher, S. Jakubek, H. Schmiedmayer:
"Mechanik: Grundlage moderner mechatronischer Systeme";
Vortrag: 200 Jahre Mechanik an der TU Wien,
Wien;
04.11.2016.
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
D. Kuzdas, D. Murschenhofer, S. Braun, S. Jakubek:
"Quasi-two dimensional fluid dynamical proton exchange membrane fuel cell model solved with spectral methods - part 1";
Vortrag: 11th European Fluid Mechanics Conference,
Sevilla/ES;
12.09.2016
- 16.09.2016.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Mayr, C. Hametner, M. Kozek, S. Jakubek:
"Parametrierung von ECU Reglerstrukturen unter Berücksichtigung von Performance und Stabilität";
Vortrag: 3. Workshop Modellbasierte Kalibriermethoden fuer Automotive-Systeme,
Wien;
22.11.2012.
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
C. Mayr, M. Kozek, S. Jakubek:
"PID Reglersynthese mit lokalen Modellnetzwerken";
Vortrag: 2. Workshop fuer Modellbasierte Kalibriermethoden,
TU Wien;
23.09.2011.
Zusätzliche Informationen
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
D. Murschenhofer, D. Kuzdas, S. Braun, S. Jakubek:
"Numerical treatment of an unsteady quasi-2D proton exchange membrane fuel cell model";
Vortrag: ERCOFTAC ADA Pilot Center Meeting,
Linz/AT;
11.11.2016.
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
D. Murschenhofer, D. Kuzdas, S. Braun, S. Jakubek:
"Quasi-two dimensional fluid dynamical proton exchange membrane fuel cell model solved with spectral methods - part 2";
Vortrag: 11th European Fluid Mechanics Conference,
Sevilla/ES;
12.09.2016
- 16.09.2016.
- Quelle: Fakultät für Maschinenwesen und Betriebswissenschaften
R. Priesner, S. Jakubek:
"Impedance Control of Rotating Machinery";
Vortrag: Internationale Tagung Schwingungen in rotierenden Maschinen (SIRM 2013),
Berlin;
25.02.2013
- 27.02.2013.
Zusätzliche Informationen
|