TU Home
Diese Publikationsliste wurde automatisch aus den Publikationsdaten der Fakultät für Elektrotechnik und Informationstechnik erstellt. Wenn Sie komplexere Suchabfragen vornehmen wollen, rufen Sie bitte die Seite "Publikationen der Fakultät" direkt auf, oder verwenden Sie die globale Suchfunktion der Publikationsdatenbank der Technischen Universität Wien!


Publikationsdatenbank Home  

Publikationsliste für Angehörige von
E366 - Institut für Sensor- und Aktuatorsysteme
als Autorinnen / Autoren bzw. wesentlich beteiligte Personen

3919 Datensätze (1979 - 2017)

Die Publikationen der Fakultät für Elektrotechnik und Informationstechnik sind erst ab dem Jahr 1996 vollzählig in der Publikationsdatenbank enthalten. Publikationen aus den Jahren vor 1996 können, müssen aber nicht in der Datenbank vorhanden sein.


Bücher und Buch-Herausgaben


  1. Autor/innen: W. Bartz; Friedrich Franek, E366 - MST

    W.J. Bartz, F. Franek (Hrg.):
    "1st Vienna International Conference on Micro- and Nano-Technology - CD-ROM";
    Österreichische Tribologische Gesellschaft, Wien, 2005, ISBN: 3-901657-18-5.

    Zusätzliche Informationen

  2. Autor/innen: W. Bartz; Friedrich Franek, E366 - MST

    W.J. Bartz, F. Franek (Hrg.):
    "2nd Vienna International Conference on Micro- and Nano-Technology";
    Österreichische Tribologische Gesellschaft, Wien, 2007, ISBN: 978-3-901657-25-2; 372 S.

    Zusätzliche Informationen

  3. Autor/innen: W. Bartz; Friedrich Franek, E366 - MST

    W.J. Bartz, F. Franek (Hrg.):
    "3rd Vienna International Conference on Micro- and Nano-Technology";
    Österreichische Tribologische Gesellschaft, Wien, 2009, ISBN: 978-3-901657-32-0; 508 S.

  4. Autor/in: Timo Bohnenberger, E366 - MST

    T. Bohnenberger (Hrg.):
    "Funktionale Schichten aus Kohlenstoffnanoröhrchen und ihre Anwendung in elektrochemischen Doppelschichtkondensatoren";
    Verlag Dr. Hut, München, 2014, ISBN: 978-3-8439-1456-7; 163 S.

    Zusätzliche Informationen

  5. Autor/innen: Werner Brenner, E366 - MST; Franz Suemecz, E366 - MST

    W. Brenner, F. Suemecz:
    "Introduction to Handling and Assembly in Microtechnology";
    Institute of Sensors and Actuator Systems, Vienna, Austria, 2004, 173 S.

  6. Autor/in: Wolfgang Herbert Buchegger, E366 - MNS

    W.H. Buchegger:
    "Microfluidic Mixing Devices for Fast Optical Analysis of Liquids";
    Institute of Sensors and Actuator Systems, Vienna, Austria, 2012, ISBN: 978-3-85465-017-1; 131 S.

  7. Autor/innen: Emilian Ceuca, Alba Iulia; Manuela Franz, E366 - AEM; Johann Nicolics, E366 - AEM

    E. Ceuca, M. Franz, J. Nicolics (Hrg.):
    "Book of Abstracts - 36th International Spring Seminar on Electronics Technology - ISSE";
    ″1 Decembrie 1918″ University, Alba Iulia, Romania, 2013, ISBN: 978-606-613-064-6; 238 S.

  8. Autor/innen: Enrico Ciulli; Bruno Piccigallo; Roberto Bassani; Friedrich Franek, E366 - MST; Joze Vizintin; Rowena Crockett

    E. Ciulli, B. Piccigallo, R. Bassani, F. Franek, J. Vizintin, R. Crockett (Hrg.):
    "EC0TRIB 2009 - Procecdings of the European Conference on Tribology 2009";
    University of Pisa, Engineering Faculty, Pisa, I, 2009, ISBN: 978-884672426-7; 1082 S.

    Zusätzliche Informationen

  9. Autor/innen: Z Cui; Richard Leach; David Flack; Werner Brenner, E366 - MST

    Z. Cui, R. Leach, D. Flack, W. Brenner et al.:
    "Microsystems Technology Standardisation Roadmap";
    National Physical Laboratory, UK, Teddington, UK, 2003, 99 S.

  10. Autor/innen: M. Numan Durakbasa, E311 - AuM; Peter Herbert Osanna, E311 - AuM; Wolfgang Wehrmann, E366; Ali Afjehi-Sadat, E311 - AuM

    M.N. Durakbasa, P.H. Osanna, W. Wehrmann, A. Afjehi-Sadat (Hrg.):
    "XVI IMEKO WORLD CONGRESS IMEKO 2000 PROCEEDINGS VOLUME IV Topic 4 - Measurement of Electrical Quantities";
    Abteilung für Austauschbau und Messtechnik, TU Wien, Wien, 2000, ISBN: 3-901888-06-3; 340 S.

  11. Autor/in: Gerhard Fasching, E366 - AEM

    G. Fasching:
    "Das Kaleidoskop der Wirklichkeiten";
    Springer-Verlag, Wien - New York, 1999, ISBN: 3-211-83390-0.

    Zusätzliche Informationen

  12. Autor/in: Gerhard Fasching, E366 - AEM

    G. Fasching:
    "Sternbilder und ihre Mythen";
    Springer-Verlag, Wien - New York, 1998, ISBN: 3-211-82479-0; 310 S.

  13. Autor/in: Gerhard Fasching, E366 - AEM

    G. Fasching:
    "Verlorene Wirklichkeiten";
    Springer-Verlag, Wien - New York, 1996, ISBN: 3-211-82897-4; 108 S.

    Zusätzliche Informationen

  14. Autor/innen: Gerhard Fasching, E366 - AEM; Herbert Pietschmann

    G. Fasching, H. Pietschmann:
    "Fortschritt von Technik und Naturwissenschaft: Wohltat oder Plage?";
    Picus Verlag Wien, Wien, 1996, ISBN: 3-85452-347-5; 63 S.

  15. Autor/in: Georg Fercher, E366 - MNS

    G. Fercher:
    "Miniaturized Capillary Electrophoresis in Ceramics - Sensing Concepts, Design and Technology";
    Institute of Sensors and Actuator Systems, Vienna, Austria, 2010, ISBN: 978-3-85465-015-7; 127 S.

  16. Autor/innen: Friedrich Franek, E366 - MST; W. Bartz; Andreas Pauschitz, E366 - MST

    F. Franek, W.J. Bartz, A. Pauschitz (Hrg.):
    "Abstract of papers from 2nd Word Tribology Congress";
    Österreichische Tribologische Gesellschaft, Wien, 2001, ISBN: 3-901657-08-8; 870 S.

    Zusätzliche Informationen

  17. Autor/innen: Friedrich Franek, E366 - MST; W. Bartz; Andreas Pauschitz, E366 - MST

    F. Franek, W.J. Bartz, A. Pauschitz (Hrg.):
    "Abstracts, Papers, Posters from 2nd World Tribology Congress 2001";
    Österreichische Tribologische Gesellschaft, Wien, 2001, ISBN: 3-901657-09-6.

    Zusätzliche Informationen

  18. Autor/innen: Friedrich Franek, E366 - MST; W. Bartz; Andreas Pauschitz, E366 - MST

    F. Franek, W.J. Bartz, A. Pauschitz (Hrg.):
    "Tribology 2001 - Scientific Achievements Industrial Applications Future Challenges";
    Österreichische Tribologische Gesellschaft, Wien, 2001, ISBN: 3-901657-07-x; 445 S.

    Zusätzliche Informationen

  19. Autor/innen: Friedrich Franek, E366 - MST; W. Bartz; Andreas Pauschitz, ACēT; Joze Vizintin; Enrico Ciulli; Rowena Crockett

    F. Franek, W.J. Bartz, A. Pauschitz, J. Vizintin, E. Ciulli, R. Crockett (Hrg.):
    "3rd European Conference on Tribology + 4th Vienna International Conference on Nano-Technology - Band I+II";
    Österreichische Tribologische Gesellschaft, Wien, 2011, ISBN: 978-3-901657-38-2.

  20. Autor/innen: Friedrich Franek, E366 - MST; Andreas Pauschitz, E366 - MST

    F. Franek, A. Pauschitz (Hrg.):
    "Einsatz und Charakterisierung technischer Oberflächen für tribologische Anwendungen";
    Österreichische Tribologische Gesellschaft, Wien, 1999, ISBN: 3-901657-04-5; 90 S.

  21. Autor/innen: Friedrich Franek, E366 - MST; Andreas Pauschitz, ACēT

    F. Franek, A. Pauschitz (Hrg.):
    "Innovationen Bei Werk- und Schmierstoffen für moderne, umweltorientierte Tribosysteme";
    ÖTG-Symposium 2008, Wien, 2008, ISBN: 978-3-901657-30-6; 274 S.

    Zusätzliche Informationen

  22. Autor/innen: Friedrich Franek, E366 - MST; Andreas Pauschitz, ACēT

    F. Franek, A. Pauschitz (Hrg.):
    "Lebensdauer und Energieeffizienz - Herausforderungen im Maschninenbau und in der Schmierungstechnik";
    Österreichische Tribologische Gesellschaft, Wien, 2009, ISBN: 978-3-901657-34-4; 270 S.

    Zusätzliche Informationen

  23. Autor/innen: Friedrich Franek, E366 - MST; Andreas Pauschitz, E366 - MST

    F. Franek, A. Pauschitz (Hrg.):
    "Qualitätssicherung, Prüftechnik und Sensorik in der Tribologie";
    Österreichische Tribologische Gesellschaft, Wien, 1998, ISBN: 3-901657-03-7; 136 S.

  24. Autor/innen: Friedrich Franek, E366 - MST; Andreas Pauschitz, E366 - MST

    F. Franek, A. Pauschitz (Hrg.):
    "Reibung und Verschleiss im Spannungsfeld von Fahrzeugherstellern und deren Kunden";
    Österreichische Tribologische Gesellschaft, Wien, 2004, ISBN: 3-901657-15-0; 317 S.

  25. Autor/innen: Friedrich Franek, E366 - MST; Andreas Pauschitz, ACēT

    F. Franek, A. Pauschitz (Hrg.):
    "RELIABILITY ENGINEERING - Simulation und Monitoring von verschleißgefährdeten Systemen";
    Österreichische Tribologische Gesellschaft, Wien, 2007, ISBN: 978-3-901657-28-3; 180 S.

    Zusätzliche Informationen

  26. Autor/innen: Friedrich Franek, E366 - MST; Andreas Pauschitz, E366 - MST

    F. Franek, A. Pauschitz (Hrg.):
    "Schmierstoffe in Tribosystemen";
    Österreichische Tribologische Gesellschaft, Wien, 2000, ISBN: 3-901657-05-3; 142 S.

  27. Autor/innen: Friedrich Franek, E366 - MST; Andreas Pauschitz, E366 - MST

    F. Franek, A. Pauschitz (Hrg.):
    "Störungsfreie Antriebstechnik durch angewandte Tribologie";
    Österreichische Tribologische Gesellschaft, Wien, 1997, ISBN: 3-901657-01-0; 96 S.

  28. Autor/innen: Friedrich Franek, E366 - MST; Andreas Pauschitz, ACēT

    F. Franek, A. Pauschitz (Hrg.):
    "SYMPOSIUM 2010 - WETTBEWERBSVORSPRUNG DURCH TRIBOLOGISCHE INNOVATIONEN - Beherrschung von Reibung und VerschleiB durch Oberflachen- und Schmierstofftechnik";
    Österreichische Tribologische Gesellschaft, Wien, 2010, ISBN: 978-3-901657-37-5.

    Zusätzliche Informationen

  29. Autor/innen: Friedrich Franek, E366 - MST; Andreas Pauschitz, ACēT

    F. Franek, A. Pauschitz (Hrg.):
    "SYMPOSIUM 2011 - TRIBOLOGIE IN INDUSTRIE UND FORSCHUNG - Werkstoff- u. Energieeffizienz - Herausforderung und Lösungsansätze";
    Österreichische Tribologische Gesellschaft, Wien, 2011, ISBN: 978-3-901657-40-5.

  30. Autor/innen: Friedrich Franek, E366 - MST; Andreas Pauschitz, ACēT

    F. Franek, A. Pauschitz (Hrg.):
    "SYMPOSIUM 2013 - Automotive Tribology";
    Österreichische Tribologische Gesellschaft, Wien, 2013, ISBN: 978-3-901657-46-7; 224 S.

  31. Autor/innen: Friedrich Franek, E366 - MST; Andreas Pauschitz, ACēT

    F. Franek, A. Pauschitz (Hrg.):
    "SYMPOSIUM 2014 - Tribologie in Industrie und Forschung / Werkstoffe, Konstruktion und Technologie";
    Österreichische Tribologische Gesellschaft, OeTG, Wien, 2014, ISBN: 978-3-901657-49-8; 206 S.

    Zusätzliche Informationen

  32. Autor/innen: Friedrich Franek, E366 - MST; Andreas Pauschitz, E366 - MST

    F. Franek, A. Pauschitz (Hrg.):
    "Tribologie rund um das KFZ";
    Österreichische Tribologische Gesellschaft, Wien, 1996, ISBN: 3-901657-00-2; 140 S.

  33. Autor/innen: Friedrich Franek, E366 - MST; Andreas Pauschitz, ACēT

    F. Franek, A. Pauschitz (Hrg.):
    "Tribosysteme in der Fahrzeugtechnik";
    Österreichische Tribologische Gesellschaft, Wien, 2005, ISBN: 3-901657-19-3; 280 S.

    Zusätzliche Informationen

  34. Autor/innen: Friedrich Franek, E366 - MST; Andreas Pauschitz, ACēT

    F. Franek, A. Pauschitz (Hrg.):
    "Zukunftstrends Tribologischer Komponenten in der Antriebstechnik";
    Österreichische Tribologische Gesellschaft, Wien, 2006, ISBN: 978-3-901657-23-8; 162 S.

    Zusätzliche Informationen

  35. Autor/innen: Friedrich Franek, E366 - MST; Andreas Pauschitz, E366 - MST

    F. Franek, A. Pauschitz (Hrg.):
    "Zuverlässige Tribosysteme, Werkstoffwahl-Berechnung-Sensorik";
    ÖTG Symposium 2003, Wien, Österreich, 2003, ISBN: 3-901657-13-4; 122 S.

  36. Autor/innen: Friedrich Franek, E366 - MST; Andreas Pauschitz, E366 - MST

    F. Franek, A. Pauschitz et al. (Hrg.):
    "Tribologie - Konstruktive Richtlinien zur Reibungs-, Verschleiß- und Schmierungstechnik";
    Schriftenreihe des Wirtschaftsförderungsinstitutes, Wien, 1996, 128 S.

  37. Autor/innen: Friedrich Franek, E366 - MST; Andreas Pauschitz, E366 - MST; Kurt Judmann, E384

    F. Franek, A. Pauschitz, K. Judmann (Hrg.):
    "Tribology in Biomechanical Systems - Science and Applications";
    Expert Verlag, D-Renningen, 2001, ISBN: 3-8169-2044-6; 156 S.

    Zusätzliche Informationen

  38. Autor/innen: Manuela Franz, E366 - AEM; Oliver Krammer; Johann Nicolics, E366 - AEM; Heinz Wohlrabe, TU Dresden

    M. Franz, O. Krammer, J. Nicolics, H Wohlrabe (Hrg.):
    "Proceedings of the 38th International Spring Seminar on Electronics Technology";
    IEEE - Institute of Electrical and Electronics Engineers, Inc., 2015, ISBN: 978-1-4799-8860-0; 556 S.

  39. Autor/innen: Manuela Franz, E366 - AEM; Johann Nicolics, E366 - AEM

    M. Franz, J. Nicolics (Hrg.):
    "35th International Spring Seminar on Electronics Technology (ISSE 2012). Book of Abstracts";
    Institut für Sensor- und Aktuatorsysteme, Technische Universität Wien, 2012, ISBN: 978-3-85465-015-7; 260 S.

  40. Autor/innen: Manuela Franz, E366 - AEM; Johann Nicolics, E366 - AEM

    M. Franz, J. Nicolics (Hrg.):
    "Conference Proceedings: 34th International Spring Seminar on Electronics Technology-New Trends in Micro/Nanotechnology";
    Institute of Electrical and Electronics Engineers, Inc., Red Hook, NY, USA, 2011, ISBN: 978-1-4577-2112-0; 687 S.

  41. Autor/innen: Manuela Franz, E366 - AEM; Johann Nicolics, E366 - AEM

    M. Franz, J. Nicolics (Hrg.):
    "Proceedings of the 2012 35th International Spring Seminar on Electronics Technology - Power Electronics";
    IEEE - Institute of Electrical and Electronics Engineers, Inc., Red Hook, NY, USA, 2012, ISBN: 978-1-4673-2240-9; 503 S.

  42. Autor/innen: Manuela Franz, E366 - AEM; Johann Nicolics, E366 - AEM; Emilian Ceuca, Alba Iulia

    M. Franz, J. Nicolics, E. Ceuca (Hrg.):
    "Proceedings of the 2013 36th International Spring Seminar on Electronics Technology";
    IEEE - Institute of Electrical and Electronics Engineers, Inc., 2013, ISBN: 978-1-4799-0036-7; 447 S.

  43. Autor/innen: Manuela Franz, E366 - AEM; Johann Nicolics, E366 - AEM; Heinz Wohlrabe, TU Dresden

    M. Franz, J. Nicolics, H Wohlrabe (Hrg.):
    "Proceedings of the 2014 37th International Spring Seminar on Electronics Technology";
    IEEE Xplore, Red Hook, NY, USA, 2014, ISBN: 978-1-4799-4455-2; 509 S.

  44. Autor/in: Alois Goiser, E366 - MNS

    A. Goiser (Hrg.):
    "Handbuch der Spread-Spectrum Technik";
    Springer-Verlag, Wien, 1998, ISBN: 3-211-83080-4; 714 S.

  45. Autor/in: Michaela Grosser, E366 - MST

    M Grosser (Hrg.):
    "Robuste Dünnschichtsysteme für Hochtemperaturdrucksensoren";
    Verlag Dr. Hut, München, 2014, ISBN: 978-3-8439-1667-7; 203 S.

    Zusätzliche Informationen

  46. Autor/in: Gabriel Hairer, E366 - MNS

    G. Hairer:
    "Fluidic Microsystems for Biochemical Analysis";
    Shaker Verlag, Aachen, D, 2009, ISBN: 978-3-8322-8736-8; 136 S.

  47. Autor/innen: Gabor Harsanyi; Heinz Wohlrabe, TU Dresden; Manuela Franz, E366 - AEM; Oliver Krammer; Attila Geczy; Illes Balazs; Johann Nicolics, E366 - AEM

    G. Harsanyi, H Wohlrabe, M. Franz, O. Krammer, A. Geczy, I. Balazs, J. Nicolics (Hrg.):
    "38th International Spring Seminar on Electronics Technology, Book of Abstracts";
    Budapest University of Technology and Economics, 2015, ISBN: 978-963-313-177-0; 250 S.

  48. Autor/in: P. Haumer, E366 - AEM

    P. Haumer:
    "Generalized Energetic Model for Characterizing the Magnetic Hysteresis of Anisotropic Thin Films";
    TU-MV Media Verlag Wien, Wien, 2015, ISBN: 978-3-903024-10-6; 190 S.

  49. Autor/in: Hans Hauser, E366 - AEM

    H. Hauser (Hrg.):
    "Sensor & Packaging";
    ÖVE, Wien, Austria, 2003, ISBN: 3-85133-032-3; 318 S.

    Zusätzliche Informationen

  50. Autor/innen: Marian A. Herman; Friedrich Franek, E366 - MST; Czeslaw Kajdas

    M. Herman, F. Franek, C. Kajdas (Hrg.):
    "Tribology Science and Application";
    Scientific Centre of the Polish Academy of Sciences (PAN), Wien, 2003, ISBN: 83-88443-61-5; 521 S.

  51. Autor/innen: Czeslaw Kajdas; Friedrich Franek, E366 - MST

    C. Kajdas, F. Franek (Hrg.):
    "Tribology of Alternative Fuels and Ecolubricants";
    Österreichische Tribologische Gesellschaft, Wien, 2006, ISBN: 3-901657-21-5; 120 S.

    Zusätzliche Informationen

  52. Autor/innen: Nikolaus Kerö, E366; Gerhard Cadek, E366

    N. Kerö, G. Cadek (Hrg.):
    "Tagungsband der TMÖ-Fachtagung Austrochipī98";
    Gesellschaft für Mikroelektronik, Wien, 1998, ISBN: 3-901578-03-x; 184 S.

  53. Autor/in: Stefan Kostner, E366 - MNS

    S. Kostner:
    "Sensors and Actuators for Singe Particles and Cells";
    Shaker Verlag, Wien, 2010, ISBN: 978-3-8322-8838-9; 123 S.

  54. Autor/in: Pero Krivic, E366 - AEM

    P. Krivic:
    "Low-Temperature Co-Fired Ceramic-Based Coils in Probe Heads for Nuclear";
    TU-MV Media Verlag Wien, Wien, 2015, ISBN: 978-3-903024-13-7; 103 S.

  55. Autor/in: Jochen Kuntner, E366 - MNS

    J. Kuntner:
    "Oil Condition Monitoring Using Physical Chemosensors";
    Shaker Verlag, 2008, ISBN: 978-3-8322-6955-5; 167 S.

  56. Autor/in: Patrick Mayrhofer, E366 - MST

    P.M. Mayrhofer (Hrg.):
    "Erhöhung der piezoelektrischen Koeffizienten von gesputterten AlN Dünnfilmen durch Dotieren mit Übergangsmetallen für MEMS";
    Verlag TU Wien, Wien, 2016, ISBN: 978-3-903024-24-3; 211 S.

    Zusätzliche Informationen

  57. Autor/innen: Klaus Miesenberger; Joachim Klaus; Wolfgang Zagler, E366

    K. Miesenberger, J. Klaus, W.L. Zagler (Hrg.):
    "Computers Helping People with Special Needs, Proceedings of the ICCHP 2002";
    Springer-Verlag, 2002, ISBN: 3-540-43904-8; 794 S.

  58. Autor/in: Johann Nicolics, E366 - AEM

    J. Nicolics (Hrg.):
    "2010 33rd International Spring Seminar on Electronics Technology. Polymer Electronics and Nanotechnologies: Towards System Integration. Conference Proceedings.";
    IEEE Press, 2010, ISBN: 978-1-4244-7850-7; 565 S.

  59. Autor/in: Johann Nicolics, E366 - AEM

    J. Nicolics (Hrg.):
    "21st International Spring Seminar on Electronics Technology, Abstracts of ISSE'98";
    Institut für Werkstoffe der Elektrotechnik, Wien, 1998, ISBN: 3-85465-004-3; 126 S.

  60. Autor/in: Johann Nicolics, E366 - AEM

    J. Nicolics (Hrg.):
    "Conference Proceedings der 28th Int. Spring Seminar on Electronics Technology";
    Institute of Sensors and Actuator Systems, Wien, 2005, ISBN: 0-7803-9325-2.

  61. Autor/in: Johann Nicolics, E366 - AEM

    J. Nicolics (Hrg.):
    "Proc. of XX. Chapter Poland ISHM Conference";
    VTE, 1996, 347 S.

  62. Autor/innen: Johann Nicolics, E366 - AEM; Hans Hauser, E366 - AEM

    J. Nicolics, H. Hauser (Hrg.):
    "28th International Spring Seminar on Electronics Technology";
    ÖVE, Wien, Austria, 2005, ISBN: 3-85133-036-6.

  63. Autor/innen: Johann Nicolics, E366 - AEM; Hans Hauser, E366 - AEM

    J. Nicolics, H. Hauser (Hrg.):
    "Book of Abstracts der 28th Int. Spring Seminar on Electronics Technology";
    Institute of Sensors and Actuator Systems, Wien, 2005.

    Zusätzliche Informationen

  64. Autor/innen: Johann Nicolics, E366 - AEM; Laszlo Musiejovsky, E366 - AEM; Hans Hauser, E366 - AEM

    J. Nicolics, L. Musiejovsky, H. Hauser (Hrg.):
    "21st International Spring Seminar on Electronics Technology, Conference Proceedings of ISSE'98";
    Institut für Werkstoffe der Elektrotechnik, Wien, 1998, ISBN: 3-85465-003-5; 300 S.

  65. Autor/in: Jeroen H. Nieuwenhuis, E366 - MNS

    J. Nieuwenhuis:
    "Microsystems for Particle Analysis";
    Institute of Sensors and Actuator Systems, Vienna, Austria, 2005, ISBN: 3-85465-014-0; 103 S.

  66. Autor/innen: Andreas Pauschitz, ACēT; Friedrich Franek, E366 - MST

    A. Pauschitz, F. Franek (Hrg.):
    "SYMPOSIUM 2012 - Tribologie und Mobilität";
    Österreichische Tribologische Gesellschaft, Wien, 2012, ISBN: 978-3-901657-43-6; 180 S.

  67. Autor/innen: Alena Pietrikova, TU-Kosice; Manuela Franz, E366 - AEM; Johann Nicolics, E366 - AEM

    A. Pietrikova, M. Franz, J. Nicolics (Hrg.):
    "Abstracs Proceedings:34th International Spring Seminar on Electronics Technology - New Trends in Micro/Nanotechnology";
    ISSE 2011, 2011, ISBN: 978-80-553-0646-9; 293 S.

  68. Autor/in: Eveline Riedling, E366

    E. Riedling (Hrg.):
    "Vienna International Conference on eLearning, eMedicine and eSupport";
    Institut für Industrielle Elektronik und Materialwissenschaften, Wien, Austria, 2003, ISBN: 3-85465-013-2.

  69. Autor/in: Eveline Riedling, E366

    E. Riedling (Hrg.):
    "Vienna International Working Conference - eLearning and eCulture";
    Österreichische Computer-Gesellschaft (OCG), Wien, Austria, 2002, ISBN: 3-85403-162-9; 219 S.

  70. Autor/in: Eveline Riedling, E366

    E. Riedling (Hrg.):
    "VIEWDET 2001 - Vienna International Workshop on Distance Education and Training";
    Institut für Industrielle Elektronik und Materialwissenschaften, Wien, 2001, ISBN: 3-901578-08-0; 84 S.

  71. Autor/innen: Eveline Riedling, E366; Gordon Davies

    E. Riedling, G. Davies (Hrg.):
    "EDICT 2000 - Proceedings of the International Conference on Information and Communication Technologies for Education";
    Österreichische Computer-Gesellschaft (OCG), Wien, 2000, ISBN: 3-85403-146-7; 372 S.

  72. Autor/in: Karl Riedling, E366

    K. Riedling (Hrg.):
    "Basics and Technology of Electronic Devices";
    Gesellschaft für Mikroelektronik, Wien, 1997, ISBN: 3-901578-02-1; 161 S.

  73. Autor/in: Karl Riedling, E366

    K. Riedling (Hrg.):
    "Current Developments of Microelectronics";
    Gesellschaft für Mikroelektronik, Wien, 1999, ISBN: 3-901578-04-8; 216 S.

  74. Autor/in: Karl Riedling, E366

    K. Riedling (Hrg.):
    "GMe Forum 2001 - Proceedings of the Seminar at the Vienna University of Technology";
    Gesellschaft für Mikroelektronik, Wien, 2001, ISBN: 3-901578-07-2; 212 S.

  75. Autor/in: Karl Riedling, E366

    K. Riedling (Hrg.):
    "GMe Forum 2003 - Proceedings of the Seminar at the Vienna University of Technology";
    Gesellschaft für Mikroelektronik, Wien, 2003, ISBN: 3-901578-10-2; 216 S.

  76. Autor/in: Karl Riedling, E366

    K. Riedling (Hrg.):
    "GMe Forum 2005 - Proceedings of the Seminar at the Vienna University Of Technology";
    Gesellschaft für Mikro- und Nanoelektronik, Wien, 2005, ISBN: 3-901578-15-3; 244 S.

  77. Autor/in: Karl Riedling, E366

    K. Riedling (Hrg.):
    "GMe Forum 2008 - Proceedings of the Seminar at the Vienna University Of Technology";
    Gesellschaft für Mikro- und Nanoelektronik, Wien, 2009, ISBN: 978-3-901578-20-5; 178 S.

  78. Autor/in: Karl Riedling, E366

    K. Riedling (Hrg.):
    "GMe Forum 2011 - Proceedings of the Seminar at the Vienna University Of Technology";
    Gesellschaft für Mikro- und Nanoelektronik, Wien, 2011, ISBN: 978-3-901578-23-6; 132 S.

  79. Autor/in: Karl Riedling, E366

    K. Riedling (Hrg.):
    "GMe Workshop 2006 - Proceedings";
    Gesellschaft für Mikro- und Nanoelektronik, Wien, 2006, ISBN: 978-3-901578-17-5; 156 S.

  80. Autor/in: Karl Riedling, E366

    K. Riedling (Hrg.):
    "Proceedings of the Workshop `Preparation, Properties, and Application of Thin Ferromagnetic Filmsī";
    Institut für Industrielle Elektronik und Materialwissenschaften, TU Wien, 2000, ISBN: 3-85465-007-8; 112 S.

  81. Autor/in: Karl Riedling, E366

    K. Riedling:
    "Technisches Programmieren in C++";
    Institut für Industrielle Elektronik und Materialwissenschaften, Wien, 2000, ISBN: 3-901578-05-6; 236 S.

  82. Autor/in: Karl Riedling, E366

    K. Riedling (Hrg.):
    "The Society for Micro- and Nanoelectronics - Annual Report 2003";
    Gesellschaft für Mikro- und Nanoelektronik, Wien, 2004, ISBN: 3-901578-12-9; 246 S.

  83. Autor/in: Karl Riedling, E366

    K. Riedling (Hrg.):
    "The Society for Micro- and Nanoelectronics - Annual Report 2004";
    Gesellschaft für Mikro- und Nanoelektronik, Wien, 2005, ISBN: 3-901578-14-5; 222 S.

  84. Autor/in: Karl Riedling, E366

    K. Riedling (Hrg.):
    "The Society for Micro- and Nanoelectronics Biennial Report 2005 - 2006";
    Gesellschaft für Mikro- und Nanoelektronik, Wien, 2007, ISBN: 978-3-901578-18-2; 436 S.

  85. Autor/in: Christian Riesch, E366 - MNS

    Ch. Riesch:
    "Micromachined Viscosity Sensors";
    Shaker Verlag, Wien, 2009, ISBN: 978-3-8322-8543-2; 143 S.

  86. Autor/innen: Daniel Paulo Rocha Wiese Meneses, E366 - MNS; Pasqualina M. Sarro; Michael J. Vellekoop, E366 - MNS

    D. Rocha Wiese Meneses, P. M. Sarro, M. Vellekoop (Hrg.):
    "CD-Rom Proceedings of the Third IEEE International Conference on Sensors";
    IEEE Sensors, 2004, ISBN: 0-7803-8693-0; 850 S.

  87. Autor/in: Michael Rosenauer, E366 - MNS

    M. Rosenauer:
    "Optofluidic Techniques for Microflow Cytometry";
    Institute of Sensors and Actuator Systems, Vienna, Austria, 2011, ISBN: 978-3-85465-016-4; 149 S.

  88. Autor/in: Matthias Sachse, E366 - MNS

    M. Sachse:
    "Development of a capacitive transducer for a fully implantable middle ear microphone";
    Institute of Sensors and Actuator Systems, Wien, Österreich, 2011, ISBN: 978-3-85465-020-1; 129 S.

  89. Autor/in: Dominik Samson, E366 - MST

    D. Samson (Hrg.):
    "Energy Harvesting in Aircraft with Special Focus on Thermoelectrics";
    Verlag Dr. Hut, München, 2011, ISBN: 978-3-8439-0453-7; 250 S.

    Zusätzliche Informationen

  90. Autor/in: Robert Schawarz, E366

    R. Schawarz (Hrg.):
    "Verhandlungsfälle erstellt im Rahmen der Lehrveranstaltung Verhandlungsstrategien II";
    Eigenverlag, Wien, 2001, ISBN: 3-85465-008-6.

  91. Autor/innen: Silvan Schmid, E366 - MNS; Luis Guillermo Villanueva; Michael Lee Roukes

    S. Schmid, L. Villanueva, M. Roukes:
    "Fundamentals of Nanomechanical Resonators";
    Springer International Publishing, Switzerland, 2016, ISBN: 978-3-319-28689-1; 175 S.

  92. Autor/innen: Ulrich Schmid, E366 - MST; Carles Cané; Herbert Shea
    Andere beteiligte Person: Society of Photo-Optical Instr

    U. Schmid, C. Cané, H. Shea:
    "Microtechnologies for the New Millennium 2009 - Volume 7362";
    in Buchreihe "Proceedings of SPIE", Buchreihen-Herausgeber: Society of Photo-Optical Instr; herausgegeben von: Society of Photo-Optical Instrumentation Engineers (SPIE); SPIE, SPIE, 2009, ISBN: 978-0-81947636-4.

    Zusätzliche Informationen

  93. Autor/innen: Ulrich Schmid, E366 - MST; Jose Luis Sànchez-Rojas; Monika Leester-Schaedel

    U. Schmid, J.L. Sànchez-Rojas, M. Leester-Schaedel (Hrg.):
    "Volume 8066 Smart Sensors, Actuators, and MEMS V";
    SPIE Digital Library, Washington, D.C., USA, 2011, ISBN: 978-0819486554.

  94. Autor/in: Michael Schneider, E366 - MST

    M. Schneider (Hrg.):
    "Einfluss der Schichtdicke und der Substratvorbehandlung auf die elektromechanischen Eigenschaften von gesputterten Aluminiumnitriddünnfilmen";
    Verlag Dr. Hut, München, 2014, ISBN: 978-3-8439-1569-4; 177 S.

    Zusätzliche Informationen

  95. Autor/innen: Walter Smetana, E366 - AEM; Goran Stojanovic, Univ. Novi Sad

    W. Smetana, G. Stojanovic (Hrg.):
    "Proceedings E!4570 IPCTECH. New Generation of 3-D Integrated Passive Components & Microsystems in LTCC-Technology";
    Shaker Verlag, Aachen, 2011, ISBN: 978-3-8322-9716-9; 214 S.

  96. Autor/innen: Karl Unterrainer, E387; Claudia Benedela, E366; Christine Brendt, E362; Juraj Darmo, E387; Daniel Dietze, E387; Monika Pexa, E387; Werner Schrenk, E362; Gottfried Strasser, E362; Marie Therese Wieser, E387

    K. Unterrainer, C. Benedela, Ch. Brendt, J. Darmo, D. Dietze, M. Pexa, W. Schrenk, G. Strasser, M.T. Wieser (Hrg.):
    "International Quantum Cascade Lasers School & Workshop 2012 (IQCLSW 2012)";
    Institut für Photonik, 2012, ISBN: 978-3-901578-24-3; 179 S.

  97. Autor/in: Sander Van den Driesche, E366 - MNS

    S. Van den Driesche:
    "Label-Free Cell Analysis: An Infrared Sensor for CH2-Stretch Ratio Determination and a Microfluidic Cell-Cell Separator";
    Institute of Sensors and Actuator Systems, Vienna, Austria, 2011, ISBN: 978-3-85465-017-1; 135 S.

  98. Autor/in: Michael J. Vellekoop, E366 - MNS

    M. Vellekoop (Hrg.):
    "IEEE Sensors 2003 - Tutorial Lecture Notes";
    IEEE Sensors, 2003, ISBN: 0-7803-8133-5.

  99. Autor/innen: Joze Vizintin; Bojan Podgornik; Kenneth Holmberg; Enrico Ciulli; Friedrich Franek, E366 - MST

    J. Vizintin, B. Podgornik, K. Holmberg, E. Ciulli, F. Franek (Hrg.):
    "EC0TRIB 2007 - Procecdings of the European Conference on Tribology and Final conference on COST 532 action";
    Slovenian Society for Tribology, Ljubljana, Slovenija, 2007, ISBN: 978-961-90254-8-2; 1178 S.

    Zusätzliche Informationen

  100. Autor/innen: Edward Walicki; Friedrich Franek, E366 - MST

    E. Walicki, F. Franek (Hrg.):
    "Applied Mechanics and Engineering";
    University Press, Zielona Gora, Polen, 2002, 1084 S.

  101. Autor/in: Michael Weilguni, E366 - AEM

    M. Weilguni:
    "Force Sensors for the Measurement of Finger Forces in Clarinet Playing";
    TU-MV Media Verlag Wien, 2015, ISBN: 978-3-903024-14-4; 141 S.

  102. Autor/innen: Heinz Wohlrabe, TU Dresden; Manuela Franz, E366 - AEM; Johann Nicolics, E366 - AEM

    H Wohlrabe, M. Franz, J. Nicolics (Hrg.):
    "37th International Spring Seminar on Electronics Technology: Book of Abstracts";
    Verlag Dr. Markus A. Detert, Templin, 2014, ISBN: 978-3-934142-49-7; 231 S.


Zeitschriftenartikel


  1. Autor/innen: A. Ababneh, Yarmouk University; A.N. Al-Omari; A.M.K. Dagamseh, Yarmouk University; H.C. Qiu, UNI Saarland; Dara Feili; V. Ruiz-Díez; T. Manzaneque; J. Hernando-Garcia; Jose Luis Sànchez-Rojas; Achim Bittner, E366 - MST; Ulrich Schmid, E366 - MST; Helmut Seidel, UNI Saarland, LMM

    A. Ababneh, A. Al-Omari, A. Dagamseh, H. Qiu, D. Feili, V Ruiz-Díez, T. Manzaneque, J. Hernando-Garcia, J.L. Sànchez-Rojas, A. Bittner, U. Schmid, H. Seidel:
    "Electrical characterization of micromachined AlN resonators at various back pressures";
    Microsystem Technologies - Micro- and Nanosystems - Information Storage and Processing Systems, 20 (2014), S. 663 - 670.

    Zusätzliche Informationen

  2. Autor/innen: A. Ababneh, Yarmouk University; M. Alsumady; Helmut Seidel, UNI Saarland, LMM; T. Manzaneque; J. Hernando-Garcia; Jose Luis Sànchez-Rojas; Achim Bittner, E366 - MST; Ulrich Schmid, E366 - MST

    A. Ababneh, M Alsumady, H. Seidel, T. Manzaneque, J. Hernando-Garcia, J.L. Sànchez-Rojas, A. Bittner, U. Schmid:
    "c-axis orientation and piezoelectric coefficients of AlN thin films sputter-deposited on titanium bottom electrodes";
    Applied Surface Science, 259 (2012), S. 59 - 65.

    Zusätzliche Informationen

  3. Autor/innen: A. Ababneh, Yarmouk University; Ulrich Schmid, E366 - MST; J. Hernando-Garcia; Jose Luis Sànchez-Rojas; Helmut Seidel, UNI Saarland, LMM

    A. Ababneh, U. Schmid, J. Hernando-Garcia, J.L. Sànchez-Rojas, H. Seidel:
    "The influence of sputter deposition parameters on piezoelectric and mechanical properties of AlN thin films";
    Materials Science and Engineering B, 172 (2010), 3; S. 253 - 258.

    Zusätzliche Informationen

  4. Autor/innen: Nadja Adamovic, E366 - MST; Ioanna Giouroudi, E366 - MNS; Jovan Matovic, E366 - MST; Zoran Djinovic, E366 - MST; Ulrich Schmid, E366 - MST

    N. Adamovic, I. Giouroudi, J. Matovic, Z. Djinovic, U. Schmid:
    "Microactuators for Fluidic Applications: Principles, Devices and Systems";
    Journal of Microelectronics and Electronic Packaging, 6 (2009), 4; S. 250 - 264.

    Zusätzliche Informationen

  5. Autor/innen: Nadja Adamovic, E366 - MST; Ulrich Schmid, E366 - MST

    N. Adamovic, U. Schmid:
    "Potential of plasmonics in photovoltaic solar cells";
    Elektrotechnik und Informationstechnik (e&i), 10 (2011), S. 342 - 347.

    Zusätzliche Informationen

  6. Autor/innen: Nadja Adamovic, E366 - MST; Aleksandar Vujanic, IMA, Wr. Neustadt

    N. Adamovic, A. Vujanic:
    "Development of UV-LIGA integrated vibrometer using 3 x 3 directional coupler";
    Microelectronic Engineering, 84 (2007), 5-8; S. 1325 - 1328.

    Zusätzliche Informationen

  7. Autor/innen: Alexander Adlaßnig; Julius C. Schuster; Roland Reicher, E366 - AEM; Walter Smetana, E366 - AEM

    A. Adlaßnig, J. Schuster, R. Reicher, W. Smetana:
    "Development of Glass Frit Free Metallization System for AlN";
    Journal of Materials Science, Materials in Electronics, 33 (1998), S. 4887 - 4892.

  8. Autor/innen: A. Agoston; Franz Keplinger, E366 - MNS; Bernhard Jakoby, E366 - MNS

    A. Agoston, F. Keplinger, B. Jakoby:
    "Evaluation of a vibrating micromachined cantilever sensor for measuring the viscosity of complex organic liquids";
    Sensors XXXX, 123-124 (2005), S. 82 - 86.

  9. Autor/innen: A. Agoston; C. Ötsch; Bernhard Jakoby, E366 - MNS

    A. Agoston, C. Ötsch, B. Jakoby:
    "Viscosity sensors for engine oil condition monitoring - Application and interpretation of results";
    Sensors XXXX, 121 (2005), S. 327 - 332.

  10. Autor/innen: Peter Aigner, E366 - MNS; Günther Stangl, E366 - MNS; Hans Hauser, E366 - AEM; Johann Hochreiter, E366 - AEM

    P. Aigner, G. Stangl, H. Hauser, J. Hochreiter:
    "Cathode Sputtered Permalloy Films of High Anisotropic Magnetoresistive Effect";
    Journal de Physique IV, 8 (1998), S. 461 - 464.

  11. Autor/innen: Ali B. Alamin Dow, Univ. of Toronto; A. Ahmed, University of Kassel; C. Popov; Ulrich Schmid, E366 - MST; Nazir P. Kherani, Univ. of Toronto

    A. Alamin Dow, A. Ahmed, C. Popov, U. Schmid, N. Kherani:
    "Aluminium nitride/nanodiamond structures for high-frequency surface acoustic wave nanotransducers";
    Micro & Nano Letters, Volume 7 (2012), Issue 10; S. 1030 - 1032.

    Zusätzliche Informationen

  12. Autor/innen: Ali B. Alamin Dow, Univ. of Toronto; Hasan Al-Rubaye, University of Toront; David Koo, University of Toront; Michael Schneider, E366 - MST; Achim Bittner, E366 - MST; Ulrich Schmid, E366 - MST; Nazir P. Kherani, Univ. of Toronto

    A. Alamin Dow, H. Al-Rubaye, D. Koo, M. Schneider, A. Bittner, U. Schmid, N. Kherani:
    "Modeling and Analysis of a Micromachined Piezoelectric Energy Harvester Stimulated by Ambient Random Vibrations";
    Proceedings of SPIE, 8066 (2011), S. 1 - 7.

    Zusätzliche Informationen

  13. Autor/innen: Ali B. Alamin Dow, Univ. of Toronto; Achim Bittner, E366 - MST; Ulrich Schmid, E366 - MST; Nazir P. Kherani, Univ. of Toronto

    A. Alamin Dow, A. Bittner, U. Schmid, N. Kherani:
    "Design, fabrication and testing of a piezoelectric energy microgenerator";
    Microsystem Technologies - Micro- and Nanosystems - Information Storage and Processing Systems, 20 (2014), S. 1035 - 1040.

    Zusätzliche Informationen

  14. Autor/innen: Ali B. Alamin Dow, Univ. of Toronto; H. Lin; Michael Schneider, E366 - MST; Ch. Petkov, University of Kassel; Achim Bittner, E366 - MST; A. Ahmed, University of Kassel; C. Popov; Ulrich Schmid, E366 - MST; Nazir P. Kherani, Univ. of Toronto

    A. Alamin Dow, H. Lin, M. Schneider, Ch. Petkov, A. Bittner, A. Ahmed, C. Popov, U. Schmid, N. Kherani:
    "Ultrananocrystalline Diamond-Based High-Velocity SAW Device Fabricated by Electron Beam Lithography";
    IEEE Transactions on Nanotechnology, 11 (2012), 5; S. 979 - 984.

    Zusätzliche Informationen

  15. Autor/innen: Ali B. Alamin Dow, Univ. of Toronto; C. Popov; Ulrich Schmid, E366 - MST; Nazir P. Kherani, Univ. of Toronto

    A. Alamin Dow, C. Popov, U. Schmid, N. Kherani:
    "Super-High-Frequency SAW Transducer Utilizing AlN/Ultrananocrystalline Diamond Architectures";
    IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 60 (2013), 8; S. 1581 - 1586.

    Zusätzliche Informationen

  16. Autor/innen: Ali B. Alamin Dow, Univ. of Toronto; Ulrich Schmid, E366 - MST; Nazir P. Kherani, Univ. of Toronto

    A. Alamin Dow, U. Schmid, N. Kherani:
    "Analysis of a Micromachined Piezoelectric Energy Harvester";
    SPIE Newsroom, SPIE Newsroom (2011), 4 S.

    Zusätzliche Informationen

  17. Autor/innen: Ali B. Alamin Dow, Univ. of Toronto; Ulrich Schmid, E366 - MST; Nazir P. Kherani, Univ. of Toronto

    A. Alamin Dow, U. Schmid, N. Kherani:
    "Unimorph and bimorph piezoelectric energy harvester stimulated by β-emitting radioisotopes: a modeling study";
    Microsystem Technologies - Micro- and Nanosystems - Information Storage and Processing Systems, 20 (2014), S. 933 - 944.

    Zusätzliche Informationen

  18. Autor/innen: Ali B. Alamin Dow, Univ. of Toronto; Michael Schneider, E366 - MST; David Koo, University of Toront; Hasan Al-Rubaye, University of Toront; Achim Bittner, E366 - MST; Ulrich Schmid, E366 - MST; Nazir P. Kherani, Univ. of Toronto

    A. Alamin Dow, M. Schneider, D. Koo, H. Al-Rubaye, A. Bittner, U. Schmid, N. Kherani:
    "Modeling the performance of a micromachined piezoelectric energy harvester";
    Microsystem Technologies - Micro- and Nanosystems - Information Storage and Processing Systems, 18 (2012), S. 1035 - 1043.

    Zusätzliche Informationen

  19. Autor/innen: M. Ando; Rupert Chabicovsky, E366 - MNS; M. Haruta

    M. Ando, R. Chabicovsky, M. Haruta:
    "Optical hydrogen sensitivity of noble metal-tungsten oxide composite films prepared by sputtering deposition";
    Sensors and Actuators B: Chemical, 76 (2001), S. 13 - 17.

  20. Autor/innen: M. Ando; Harald Steffes; Rupert Chabicovsky, E366 - MNS; M. Haruta; Günther Stangl, E366 - MNS

    M. Ando, H. Steffes, R. Chabicovsky, M. Haruta, G. Stangl:
    "Optical and Electrical H2- and NO2-Sensing Properties of Au/InxOyNz Films";
    IEEE Sensors Journal, 04 (2004), 2; S. 232 - 236.

  21. Autor/innen: Petru Andrei, E366 - AEM; A. Stancu; Hans Hauser, E366 - AEM; Paul L. Fulmek, E366 - AEM

    P. Andrei, A. Stancu, H. Hauser, P. Fulmek:
    "Temperature, stress and rate dependent numerical implementation of magnetization processes in phenomenological models";
    Journal of Optoelectronics and Advanced Materials, 9 (2007), S. 1137 - 1139.

  22. Autor/innen: Petru Andrei, E366 - AEM; Laurentiu Stoleriu, E366 - AEM; Hans Hauser, E366 - AEM

    P. Andrei, L. Stoleriu, H. Hauser:
    "Hysteresis Model Identification for particulate media";
    Journal of Applied Physics, 87 (2000), 9; S. 6555 - 6557.

  23. Autor/innen: Daniela Andrijasevic, E366 - MST; Ioanna Giouroudi, E366 - MST; Walter Smetana, E366 - AEM; Stefan Boehm; Johann Zehetner, FH Vorarlberg; Werner Brenner, E366 - MST

    D. Andrijasevic, I. Giouroudi, W. Smetana, S. Boehm, J. Zehetner, W. Brenner:
    "New approach to micro-joining by hot gas stream";
    Microelectronic Engineering, 83 (2006), 4 - 9; S. 1445 - 1448.

    Zusätzliche Informationen

  24. Autor/innen: Daniela Andrijasevic, E366 - MST; Walter Smetana, E366 - AEM; Johann Zehetner, E366; S. Zoppel, FH Vorarlberg; Werner Brenner, E366 - MST

    D. Andrijasevic, W. Smetana, J. Zehetner, S. Zoppel, W. Brenner:
    "Aspects of micro structuring Low Temperature Cofired Ceramic (LTCC) for realisation complex 3D objects by embossing";
    Microelectronic Engineering, 84 (2007), 5-8; S. 1198 - 1201.

    Zusätzliche Informationen

  25. Autor/innen: Hannes Antlinger, IMM, JKU; Roman Beigelbeck, Donau Uni Krems; Stefan Clara, JKU Linz; Samir Cerimovic, E366 - MNS; Franz Keplinger, E366 - MNS; Bernhard Jakoby, JKU Linz

    H. Antlinger, R. Beigelbeck, S. Clara, S. Cerimovic, F. Keplinger, B. Jakoby:
    "Investigation and Modeling of an Acoustoelectric Sensor Setup for the Determination of the Longitudinal Viscosity";
    IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 63 (2016), 12; S. 2187 - 2196.

  26. Autor/innen: Hannes Antlinger, IMM, JKU; Stefan Clara, JKU Linz; Roman Beigelbeck, Donau Uni Krems; Samir Cerimovic, E366 - MNS; Franz Keplinger, E366 - MNS; Bernhard Jakoby, JKU Linz

    H. Antlinger, S. Clara, R. Beigelbeck, S. Cerimovic, F. Keplinger, B. Jakoby:
    "A Differential Pressure Wave-Based Sensor Setup for the Acoustic Viscosity of Liquids";
    IEEE Sensors Journal, 16 (2016), 21; S. 7609 - 7619.

  27. Autor/innen: Hannes Antlinger, IMM, JKU; Stefan Clara, JKU Linz; Roman Beigelbeck, ÖAW; Samir Cerimovic, E366 - MNS; Franz Keplinger, E366 - MNS; Bernhard Jakoby, JKU Linz

    H. Antlinger, S. Clara, R. Beigelbeck, S. Cerimovic, F. Keplinger, B. Jakoby:
    "An acoustic transmission sensor for the characterization of fluids in terms of their longitudinal viscosity";
    Procedia Engineering, 47 (2012), S. 248 - 252.

  28. Autor/innen: Hannes Antlinger, IMM, JKU; Stefan Clara, JKU Linz; Roman Beigelbeck, ÖAW; Samir Cerimovic, E366 - MNS; Franz Keplinger, E366 - MNS; Bernhard Jakoby, JKU Linz

    H. Antlinger, S. Clara, R. Beigelbeck, S. Cerimovic, F. Keplinger, B. Jakoby:
    "An acoustic transmission sensor for the longitudinal viscosity of fluids";
    Sensors XXXX, 202 (2013), S. 23 - 29.

  29. Autor/innen: Hannes Antlinger, IMM, JKU; Stefan Clara, JKU Linz; Roman Beigelbeck, ÖAW; Samir Cerimovic, E366 - MNS; Franz Keplinger, E366 - MNS; Bernhard Jakoby, JKU Linz

    H. Antlinger, S. Clara, R. Beigelbeck, S. Cerimovic, F. Keplinger, B. Jakoby:
    "Sensing the characteristic acoustic impedance of a fluid utilizing acoustic pressure waves";
    Sensors and Actuators B: Chemical, 186 (2012), S. 94 - 99.

  30. Autor/innen: Hannes Antlinger, IMM, JKU; Stefan Clara, JKU Linz; Roman Beigelbeck, ÖAW; Samir Cerimovic, E366 - MNS; Franz Keplinger, E366 - MNS; Bernhard Jakoby, JKU Linz

    H. Antlinger, S. Clara, R. Beigelbeck, S. Cerimovic, F. Keplinger, B. Jakoby:
    "Utilizing acoustic pressure waves for sensing fluid properties";
    Procedia Engineering, 25 (2011), S. 775 - 778.

  31. Autor/innen: Valentin Aranha dos Santos, E134; Leopold Schmetterer, Med.Univ.Wien; Martin Gröschl, E134 - E134-3; G. Garhöfer, Med.Univ. Wien; D. Schmidl, Med.Univ. Wien; Martin Kucera, E366 - MST; A. Unterhuber, Med.Univ. Wien; Jean-Pierre Hermand, Univ. Bruxelles; René M. Werkmeister, Med.Univ.Wien

    V. Aranha dos Santos, L. Schmetterer, M. Gröschl, G. Garhöfer, D. Schmidl, M. Kucera, A. Unterhuber, J. Hermand, R.M. Werkmeister:
    "In vivo tear film thickness measurement and tear film dynamics visualization using spectral domain optical coherence tomography";
    Optics Express, 23 (2015), 16; S. 21043 - 21063.

    Zusätzliche Informationen

  32. Autor/innen: Gerald Artner, E389; Philipp K. Gentner, Kathrein; Johann Nicolics, E366 - AEM; Christoph Mecklenbräuker, E389

    G. Artner, P. K. Gentner, J. Nicolics, C. Mecklenbräuker:
    "Carbon Fiber Reinforced Polymer with Shredded Fibers: Quasi-Isotropic Material Properties and Antenna Performance";
    International Journal of Antennas and Propagation, 2017 (2017), Article ID 6152651; 11 S.

    Zusätzliche Informationen

  33. Autor/innen: Elmar Aschauer; Rainer Fasching, E366 - MNS; Mohammad Mehdi Varahram, E366 - MNS; G. Jobst; Gerald Urban; G Nicolussi; Wolfgang Husinsky, E134 - E134-1; Gernot Friedbacher, E164 - IAC; Manfred Grasserbauer, E164 - IAC

    E. Aschauer, R. Fasching, M. Varahram, G. Jobst, G. Urban, G. Nicolussi, W. Husinsky, G. Friedbacher, M. Grasserbauer:
    "Surface Modification of platinum thin film electrodes towards a defined roughness an microporosity";
    Journal of Electroanalytical Chemistry, 426 (1997), S. 157 - 165.

  34. Autor/in: Andreas Astleitner, E366 - MST

    A. Astleitner:
    "Arbeiten mit Solid Edge";
    ZiD-Line, 13 (2005), S. 31 - 33.

    Zusätzliche Informationen

  35. Autor/in: Andreas Astleitner, E366 - MST

    A. Astleitner:
    "Novell an der TU Wien oder "Totgesagte leben länger"";
    ZiD-Line, Nr. 17 (2007), S. 25 - 27.

    Zusätzliche Informationen

  36. Autor/innen: I. Atassi, E366 - AEM; Christian Atzlesberger, E366; Paul L. Fulmek, E366 - AEM; Johann Nicolics, E366 - AEM; Walter Smetana, E366 - AEM

    I. Atassi, C. Atzlesberger, P. Fulmek, J. Nicolics, W. Smetana:
    "Ferrofluid-Piston Based Micropump and Electromagnetic Actuation in LTCC Technology";
    Journal of Microelectronics and Electronic Packaging, 6 (2009), 4; S. 228 - 239.

  37. Autor/innen: B. Augustyniak; L. Piotrowski; M. Radczuk; Marek Chmielewski; Hans Hauser, E366 - AEM

    B. Augustyniak, L. Piotrowski, M. Radczuk, M. Chmielewski, H. Hauser:
    "Investigation of magnetic and magnetomechanical hysteresis properties of Fe-Si alloys with classical and mechanical Barkhausen effects and magnetoacousitc emission";
    Journal of Applied Physics, 93 (2003), 10; S. 7465 - 7467.

  38. Autor/innen: B. Augustyniak; M. Radczuk; Marek Chmielewski; Hans Hauser, E366 - AEM

    B. Augustyniak, M. Radczuk, M. Chmielewski, H. Hauser:
    "Imaging of Grains and Internal Stress in Go Fe-Si Alloy with Barkhausen Effects";
    Journal of Electrical Engineering, 53 (2002), 10/S; S. 1 - 5.

  39. Autor/innen: Andreas Backes, E366 - MST; Achim Bittner, E366 - MST; Markus Leitgeb, E366 - MST; Ulrich Schmid, E366 - MST

    A. Backes, A. Bittner, M. Leitgeb, U. Schmid:
    "Influence of metallic catalyst and doping level on the metal assisted chemical etching of silicon";
    Scripta Materialia, 114 (2016), S. 27 - 30.

    Zusätzliche Informationen

  40. Autor/innen: Andreas Backes, E366 - MST; Markus Leitgeb, E366 - MST; Achim Bittner, E366 - MST; Ulrich Schmid, E366 - MST

    A. Backes, M. Leitgeb, A. Bittner, U. Schmid:
    "Temperature Dependent Pore Formation in Metal Assisted Chemical Etching of Silicon";
    ECS Journal Of Solid State Science And Technology, 5 (2016), 12; S. 653 - 656.

    Zusätzliche Informationen

  41. Autor/innen: Andreas Backes, E366 - MST; Ulrich Schmid, E366 - MST

    A. Backes, U. Schmid:
    "Impact of doping level on the metal assisted chemical etching of p-type silicon";
    Sensors and Actuators B: Chemical, 193 (2014), S. 883 - 887.

    Zusätzliche Informationen

  42. Autor/innen: Christian Backfrieder, FHOÖ; Gerald Ostermayer, E366 - MNS; Christoph Mecklenbräuker, E389

    C. Backfrieder, G. Ostermayer, C. Mecklenbräuker:
    "Increased Traffic Flow through Node-Based Bottleneck Prediction and V2X Communication";
    IEEE Transactions on Intelligent Transportation Systems, PP (2016), 99; S. 1 - 15.

    Zusätzliche Informationen

  43. Autor/innen: Ali Badar; Ulrich Schmid, E366 - MST; Nazir P. Kherani, Univ. of Toronto

    A. Badar, U. Schmid, N. Kherani:
    "Analysis and modeling of a piezoelectric energy harvester stimulated by β-emitting radioisotopes";
    Smart Materials and Structures, 20 (2011), S. 1 - 9.

    Zusätzliche Informationen

  44. Autor/innen: Ewald Badisch, ACēT; C. Katsich, ACēT; H. Winkelmann, ACēT; Friedrich Franek, E366 - MST; Manish Roy, ACēT

    E. Badisch, C. Katsich, H. Winkelmann, F. Franek, M. Roy:
    "Wear behaviour of hardfaced Fe-Cr-Calloy and austenitic steel under 2-body and 3-body conditions at elevated temperature";
    Tribology International, 43 (2010), S. 1234 - 1244.

    Zusätzliche Informationen

  45. Autor/innen: Ewald Badisch, ACēT; M. Kirchgaßner; Friedrich Franek, E366 - MST

    E. Badisch, M. Kirchgaßner, F. Franek:
    "Continuous impact/abrasion testing: influence of testing parameters on wear behaviour";
    Proceedings of the Institution of Mechanical Engineers Part J - Journal of Engineering Tribology, 223 (2009), 5; S. 741 - 750.

    Zusätzliche Informationen

  46. Autor/innen: Ewald Badisch, ACēT; M. Kirchgaßner; Reinhard Polak; Friedrich Franek, E366 - MST

    E. Badisch, M. Kirchgaßner, R. Polak, F. Franek:
    "The comparison of wear properties of different Fe-based hardfacing alloys in four kinds of testing methods";
    Tribotest, 14 (2008), 4; S. 225 - 233.

    Zusätzliche Informationen

  47. Autor/innen: Ewald Badisch, ACēT; H. Winkelmann, ACēT; Friedrich Franek, E366 - MST

    E. Badisch, H. Winkelmann, F. Franek:
    "High-temperature cyclic impact abrasion testing: wear behaviour of single and multiphase materials up to 750 °C";
    Estonian Journal of Engineering, 15 (2009), 4; S. 359 - 366.

    Zusätzliche Informationen

  48. Autor/in: Alireza R. Baghai-Wadji, E366 - MNS

    A.R. Baghai-Wadji:
    "Fast-MoM: A Method-of-Moments Formulation for Fast Computations";
    Applied Computational Electromagnetics Society Journal, 12 (1997), 2; S. 75 - 80.

  49. Autor/in: Alireza R. Baghai-Wadji, E366 - AEM

    A.R. Baghai-Wadji:
    "Theory and Applications of the Green's Functions";
    International Journal of High Speed Electronics and Systems (eingeladen), 10 (2000), 4; S. 1.

  50. Autor/innen: Alireza R. Baghai-Wadji, E366 - MNS; S.M. Chehrehrazi

    A.R. Baghai-Wadji, S.M. Chehrehrazi:
    "Real-Space Green's Function of an Isolated Point-Charge in an Anisotropic Unbounded Dielectric";
    IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 44 (1997), 1; S. 96 - 101.

  51. Autor/innen: Alireza R. Baghai-Wadji, E366 - MNS; Siegfried Selberherr, E360; Franz Seifert, E366 - MNS

    A.R. Baghai-Wadji, S. Selberherr, F. Seifert:
    "Two-Dimensional Green's Function of a Semi-Infinite Anisotropic Dielectric in the Wavenumber Domain";
    IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, UFFC-33 (1986), 3; S. 315 - 317.

    Zusätzliche Informationen

  52. Autor/innen: Alireza R. Baghai-Wadji, E366 - AEM; K. Varis

    A.R. Baghai-Wadji, K. Varis:
    "Pseudo-spectral Analysis of Radially-diagonalized Maxwell's Equations in Cylindrical Co-ordinates";
    Optics Express, 11 (2003), 23; S. 3048 - 3062.

  53. Autor/innen: D. Bajalan; Hans Hauser, E366 - AEM; Paul L. Fulmek, E366 - AEM

    D. Bajalan, H. Hauser, P. Fulmek:
    "Modeling of the iron irradiation effect on the hysteresis in nanostructured thin films";
    Physica B: Condensed Matter, 343 (2004), S. 384 - 389.

  54. Autor/innen: J. Bastemeijer; G. Wijnand Lubking; Frederic Laugere; Michael J. Vellekoop, E366 - MNS

    J. Bastemeijer, G.W. Lubking, F. Laugere, M. Vellekoop:
    "Electronic protection methods for conductivity detectors in micro capillary electrophoresis devices";
    Sensors and Actuators B: Chemical, 83 (2002), S. 98 - 103.

  55. Autor/innen: Thomas Becker, EADS; Ulrich Schmid, E366 - MST; Bernd Michel, MMC-Berlin

    Th. Becker, U. Schmid, B. Michel:
    "Editorial - Special Issue of the Conference `Smart Sensors, Actuators and MEMSī, within the SPIE Europe Symposium `Microtechnologies for the New Millenniumī Dresden, Germany, 4-6 May 2009";
    Microsystem Technologies - Micro- and Nanosystems - Information Storage and Processing Systems (eingeladen), 16 (2010), 5; S. 655.

  56. Autor/innen: Nikola Bednar, E366 - MST; Noemi Severino, E366 - MST; Nadja Adamovic, E366 - MST

    N. Bednar, N. Severino, N. Adamovic:
    "A strategy for implementation of triangular thin-film photovoltaic modules";
    Solar Energy, 120 (2015), S. 310 - 317.

    Zusätzliche Informationen

  57. Autor/innen: Nikola Bednar, E366 - MST; Noemi Severino, E366 - MST; Nadja Adamovic, E366 - MST

    N. Bednar, N. Severino, N. Adamovic:
    "Front grid optimization of Cu(In,Ga)Se2 solar cells using hybrid modeling approach";
    Renewable & Sustainable Energy Reviews, 7 (2015), 0211201; S. 1 - 8.

    Zusätzliche Informationen

  58. Autor/innen: Nikola Bednar, E366 - MST; Noemi Severino, E366 - MST; Nadja Adamovic, E366 - MST

    N. Bednar, N. Severino, N. Adamovic:
    "Modelling of Cu(In,Ga)Se2 Solar Materials/Devices";
    Journal of Green Engineering, 5 (2016), 3 & 4; S. 1 - 10.

    Zusätzliche Informationen

  59. Autor/innen: Nikola Bednar, E366 - MST; Noemi Severino, E366 - MST; Nadja Adamovic, E366 - MST

    N. Bednar, N. Severino, N. Adamovic:
    "Optical Simulation of Light Management in CIGS Thin-Film Solar Cells Using Finite Element Method";
    Applied Sciences, 5 (2015), S. 1735 - 1744.

    Zusätzliche Informationen

  60. Autor/innen: Roman Beigelbeck, E366 - MNS; Hannes Antlinger, IMM, JKU; Samir Cerimovic, E366 - MNS; Stefan Clara, JKU Linz; Franz Keplinger, E366 - MNS; Bernhard Jakoby, JKU Linz

    R. Beigelbeck, H. Antlinger, S. Cerimovic, S. Clara, F. Keplinger, B. Jakoby:
    "Resonant pressure wave setup for simultaneous sensing of longitudinal viscosity and sound velocity of liquids";
    Measurement Science & Technology, 24 (2013), S. 125101-1 - 125101-14.

  61. Autor/innen: Roman Beigelbeck, Donau Uni Krems; Samir Cerimovic, E366 - MNS; D. Reyes-Romero, Uni Freiburg, D; Franz Kohl, Acad. of Sciences; Thomas Voglhuber-Brunnmaier, JKU Linz; Bernhard Jakoby, JKU Linz; Thilo Sauter, ÖAW; Gerald Urban

    R. Beigelbeck, S. Cerimovic, D. Reyes-Romero, F. Kohl, T. Voglhuber-Brunnmaier, B. Jakoby, T. Sauter, G. Urban:
    "Thermal Properties of a Thin-Film Membrane Embedded in a Multiparameter Wind Sensor - On-Device Characterization Utilizing a Transient Measurement Approach";
    IEEE Sensors Journal, 16 (2015), 10; 10 S.

    Zusätzliche Informationen

  62. Autor/innen: Roman Beigelbeck, ÖAW; Samir Cerimovic, E366 - MNS; Amir Talic, ÖAW; Franz Kohl, Acad. of Sciences; Franz Keplinger, E366 - MNS

    R. Beigelbeck, S. Cerimovic, A. Talic, F. Kohl, F. Keplinger:
    "Measurement technique for the thermal properties of thin-film diaphragms embedded in calorimetric flow sensors";
    Microsystem Technologies - Micro- and Nanosystems - Information Storage and Processing Systems, 18 (2012), 7-8; S. 973 - 981.

  63. Autor/innen: Roman Beigelbeck, E366 - MNS; Bernhard Jakoby, E366 - MNS

    R. Beigelbeck, B. Jakoby:
    "A two-dimensional analysis of spurious compressional wave excitation by thickness-shear-mode resonators";
    Journal of Applied Physics, 95 (2004), 9; S. 4989 - 4995.

  64. Autor/innen: Roman Beigelbeck; Fritz Paschke, E366; Anton Preisinger, E164 - SC; S. Aslanian

    R. Beigelbeck, F. Paschke, A. Preisinger, S. Aslanian:
    "The image of the submarine geomorphological structures by water waves in satellite photographs";
    Geophysical Research Abstracts (GRA), 8 (2006), S. 1 - 2.

  65. Autor/innen: Roman Beigelbeck; Fritz Paschke, E366; Anton Preisinger, E164 - SC; S. Aslanian

    R. Beigelbeck, F. Paschke, A. Preisinger, S. Aslanian:
    "The influence of the sea bottom on water wave patterns in satellite photographs";
    Geophysical Research Abstracts (GRA), 9 (2007), S. 1 - 2.

  66. Autor/innen: Roman Beigelbeck, Donau Uni Krems; Michael Schneider, E366 - MST; Johannes Schalko, E366 - MNS; Achim Bittner, E366 - MST; Ulrich Schmid, E366 - MST

    R. Beigelbeck, M. Schneider, J. Schalko, A. Bittner, U. Schmid:
    "A two-step load-deflection procedure applicable to extract the Young's modulus and the residual tensile stress of circularly shaped thin-film diaphragms";
    Journal of Applied Physics, 116 (2014), 114905; S. 11490501 - 11490513.

  67. Autor/innen: Darko Belavic; Marko Hrovat; Marina Santo Zarnik; Andreja Bencan; Walter Smetana, E366 - AEM; Roland Reicher, E366 - AEM; Heinz Homolka, E366 - AEM

    D. Belavic, M. Hrovat, M. Santo Zarnik, A. Bencan, W. Smetana, R. Reicher, H. Homolka:
    "Thick-film strain gauges on alumina, zirconia and steel substrates";
    Microelectronics International, 20 (2003), 2; S. 41 - 45.

  68. Autor/innen: Ewald Benes, E134 - E134-3; Martin Gröschl, E134 - E134-3; Franz Seifert, E366 - MNS; Alfred Pohl, E366 - MNS

    E. Benes, M. Gröschl, F. Seifert, A. Pohl:
    "Comparison between BAW and SAW sensor principles";
    IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 45 (1998), 5; S. 1314 - 1330.

  69. Autor/in: Gerald Berger, E366 - MNS

    G. Berger:
    "Funknetzplanung im VHF Bereich";
    FMTS-forum (eingeladen), 3 (2001), 01Z020322 G; S. 23 - 25.

  70. Autor/in: Gerald Berger, E366 - MNS

    G. Berger:
    "Funkwellenausbreitung im VHF Bereich";
    FMTS-forum (eingeladen), 3 (2001), 01Z020322 G; S. 4 - 7.

  71. Autor/innen: Gerald Berger, E366 - MNS; Franz Seifert, E366 - MNS

    G. Berger, F. Seifert:
    "Bandspreizverfahren im Truppenfunk";
    Truppendienst - European Military Press Association, 224 (1997), S. 14 - 18.

  72. Autor/innen: Axel Berthold; Frederic Laugere; Hugo Schellevis; Charles R. De Boer; Mario Laros; Rosanne Guijt; Pasqualina M. Sarro; Michael J. Vellekoop, E366 - MNS

    A. Berthold, F. Laugere, H. Schellevis, Ch.R. De Boer, M. Laros, R. Guijt, P. M. Sarro, M. Vellekoop:
    "Fabrication of a glass-implemeted microcapillary electrophoresis device with integrated contactless conductivity detection";
    Electrophoresis, 23 (2002), S. 3511 - 3519.

  73. Autor/innen: Achim Bittner, E366 - MST; A. Ababneh, Yarmouk University; Helmut Seidel, UNI Saarland, LMM; Ulrich Schmid, E366 - MST

    A. Bittner, A. Ababneh, H. Seidel, U. Schmid:
    "Influence of the crystal orientation on the electrical properties of AlN thin films on LTCC substrates";
    Applied Surface Science, 257 (2010), 3; S. 1088 - 1091.

    Zusätzliche Informationen

  74. Autor/innen: Achim Bittner; Timo Bohnenberger; R. Engel; Helmut Seidel, UNI Saarland, LMM; Ulrich Schmid, E366 - MST

    A. Bittner, T. Bohnenberger, R. Engel, H. Seidel, U. Schmid:
    "Morphological and Electrical Properties of Silver Thin Films Sputter Deposited on LTCC Substrates";
    Journal of Microelectronics and Electronic Packaging (eingeladen), 5 (2009), 4; S. 169 - 173.

    Zusätzliche Informationen

  75. Autor/innen: Achim Bittner; N. Nagel; Helmut Seidel, UNI Saarland, LMM; Ulrich Schmid, E366 - MST

    A. Bittner, N. Nagel, H. Seidel, U. Schmid:
    "The Impact of Substrate Properties on the Electromigration Resistance of Sputter-Deposited Cu Thin Films";
    Proceedings of SPIE, 8066 (2011), S. 1 - 7.

    Zusätzliche Informationen

  76. Autor/innen: Achim Bittner, E366 - MST; N. Pagel, Saarland University; Helmut Seidel, UNI Saarland, LMM; Ulrich Schmid, E366 - MST

    A. Bittner, N. Pagel, H. Seidel, U. Schmid:
    "Long-term stability of Ag and Cu thin films on glass, LTCC and alumina substrates";
    Microsystem Technologies - Micro- and Nanosystems - Information Storage and Processing Systems, 18 (2012), S. 879 - 884.

    Zusätzliche Informationen

  77. Autor/innen: Achim Bittner, E366 - MST; Ulrich Schmid, E366 - MST

    A. Bittner, U. Schmid:
    "Permittivity of LTCC Substrates Porousified With a Wet Chemical Etching Process";
    Procedia Engineering, 5 (2010), S. 327 - 330.

    Zusätzliche Informationen

  78. Autor/innen: Achim Bittner; Ulrich Schmid, E366 - MST

    A. Bittner, U. Schmid:
    "The porosification of fired LTCC substrates by applying a wet chemical etching procedure";
    Journal of the European Ceramic Society, 29 (2009), S. 99 - 104.

    Zusätzliche Informationen

  79. Autor/innen: Achim Bittner, E366 - MST; Helmut Seidel, UNI Saarland, LMM; Ulrich Schmid, E366 - MST

    A. Bittner, H. Seidel, U. Schmid:
    "Electromigration resistance and long term stability of textured silver thin films on LTCC";
    Microelectronic Engineering, 88 (2010), 1; S. 127 - 130.

    Zusätzliche Informationen

  80. Autor/innen: Achim Bittner, E366 - MST; Helmut Seidel, UNI Saarland, LMM; Ulrich Schmid, E366 - MST

    A. Bittner, H. Seidel, U. Schmid:
    "High-Frequency Characterization of Porous Low-Temperature Cofired Ceramics Substrates";
    Journal of the American Ceramic Society, 93 (2010), 11; S. 3778 - 3781.

    Zusätzliche Informationen

  81. Autor/innen: Achim Bittner, E366 - MST; Helmut Seidel, UNI Saarland, LMM; Ulrich Schmid, E366 - MST

    A. Bittner, H. Seidel, U. Schmid:
    "Permittivity of modified polyimide layers on LTCC";
    Microelectronic Engineering, 88 (2011), S. 2977 - 2980.

    Zusätzliche Informationen

  82. Autor/innen: N. Blaz; A. Maric, Uni Novi Sad, Serbia; I. Atassi, E366 - AEM; Goran Radosavljevic, E366 - AEM; Lj. Zivanov; Heinz Homolka, E366 - AEM; Walter Smetana, E366 - AEM

    N. Blaz, A. Maric, I. Atassi, G. Radosavljevic, L. Zivanov, H. Homolka, W. Smetana:
    "Complex Permeability Changes of Ferritic LTCC Samples With Variation of Sintering Temperatures";
    IEEE Transactions on Magnetics, 48 (2012), 4; S. 1563 - 1566.

  83. Autor/innen: N. Blaz; A. Maric, Uni Novi Sad, Serbia; Goran Radosavljevic, E366 - AEM; Nebojsa Mitrovic, Uni Kragujevac; I. Atassi, E366 - AEM; Walter Smetana, E366 - AEM; Lj. Zivanov

    N. Blaz, A. Maric, G. Radosavljevic, N. Mitrovic, I. Atassi, W. Smetana, L. Zivanov:
    "Determination of electric and magnetic properties of commercial LTCC soft ferrite material";
    Journal of Microelectronics and Electronic Packaging, 8 (2011), 1; S. 1 - 9.

  84. Autor/innen: N. Blaz; Goran Miskovic, E366 - AEM; A. Maric, Uni Novi Sad, Serbia; Mirjana Damnjanovic, Univ. Novi Sad; Goran Radosavljevic, E366 - AEM; Lj. Zivanov

    N. Blaz, G. Miskovic, A. Maric, M. Damnjanovic, G. Radosavljevic, L. Zivanov:
    "LC Resonant Displacement Sensor Realized with Various Designs of Meander Inductor";
    Sensor Letters, 11 (2013), 4; S. 636 - 641.

  85. Autor/innen: N. V. Blaz, Univ. Novi Sad; A. Maric, Uni Novi Sad, Serbia; G. Radosavljevic, Uni Novi Sad, Serbia; Lj. Zivanov; Goran Stojanovic, Univ. Novi Sad; I. Atassi, E366 - AEM; Walter Smetana, E366 - AEM

    N. V. Blaz, A. Maric, G. Radosavljevic, L. Zivanov, G. Stojanovic, I. Atassi, W. Smetana:
    "Modeling and characterization of frequency and temperature variation of complex permeability of ferrite ltcc material";
    Progress In Electromagnetics Research B, 23 (2010), S. 131 - 146.

  86. Autor/innen: N. V. Blaz, Univ. Novi Sad; A. Maric, Uni Novi Sad, Serbia; G. Radosavljevic, Uni Novi Sad, Serbia; Ljiljana Zivanov, CoAutor - E366-MST; Goran Stojanovic, Univ. Novi Sad; I. Atassi, E366 - AEM; Michael Unger, E366 - AEM; Walter Smetana, E366 - AEM

    N. V. Blaz, A. Maric, G. Radosavljevic, L. Zivanov, G. Stojanovic, I. Atassi, M. Unger, W. Smetana:
    "Determination of Electrical and Magnetic Characteristics of Different LTCC Tapes";
    Berichte aus der Elektrotechnik: Proceedings E!4570 IPCTECH. New Generation of 3-D Integrated Passive Components & Microsystems in LTCC-Technology, 1 (2011), S. 57 - 64.

  87. Autor/innen: J. Böhm, ACēT; Martin Jech, ACēT; Michael J. Vellekoop, E366 - MNS

    J. Böhm, M. Jech, M. Vellekoop:
    "Analysis of NM-Scale Scratches on High-Gloss Tribological Surfaces by Using an Angle-Resolved Light Scattering Method";
    Tribology Letters, 37 (2010), S. 209 - 214.

  88. Autor/innen: J. Böhm, ACēT; Martin Jech, ACēT; G. Vorlaufer, ACēT; Michael J. Vellekoop, E366 - MNS

    J. Böhm, M. Jech, G. Vorlaufer, M. Vellekoop:
    "Comparison of parametric and profilometric surface analysis methods on machined surfaces";
    Proceedings of the Institution of Mechanical Engineers Part J - Journal of Engineering Tribology, 223 (2009), S. 799 - 805.

  89. Autor/innen: J. Böhm, ACēT; A. Vernes, ACēT; Michael J. Vellekoop, E366 - MNS

    J. Böhm, A. Vernes, M. Vellekoop:
    "Investigation of chatter marks on ground surfaces by means of optical methods";
    Optics and Lasers in Engineering, 49 (2011), S. 1309 - 1313.

  90. Autor/innen: J. Böhm, ACēT; A. Vernes, ACēT; G. Vorlaufer, ACēT; Michael J. Vellekoop, E366 - MNS

    J. Böhm, A. Vernes, G. Vorlaufer, M. Vellekoop:
    "Online monitoring of a belt grinding process by using a light scattering method";
    Applied Optics, 49 (2010), 30; S. 5891 - 5898.

  91. Autor/innen: Timo Bohnenberger, E366 - MST; Jovan Matovic, E366 - MST; Ulrich Schmid, E366 - MST

    T. Bohnenberger, J. Matovic, U. Schmid:
    "Thin Catalyst Layers Based on Carbon Nanotubes for PEM-Fuel Cell Applications";
    Proceedings of SPIE, Volume 8066 (2011), S. 1 - 7.

    Zusätzliche Informationen

  92. Autor/innen: Timo Bohnenberger, E366 - MST; Lidija D. Rafailovic, CEST; Christian Weilach, E165 - PC-O; David Hubmayr, E366 - MST; Ulrich Schmid, E366 - MST

    T. Bohnenberger, L. Rafailovic, C Weilach, D. Hubmayr, U. Schmid:
    "Thin films from functionalized carbon nanotubes using the layer-by-layer technique";
    Thin Solid Films, 551 (2014), S. 68 - 73.

    Zusätzliche Informationen

  93. Autor/innen: Timo Bohnenberger, E366 - MST; Ulrich Schmid, E366 - MST

    T. Bohnenberger, U. Schmid:
    "Layer-by-layer approach for deposition of pure carbon nanotubes and composite films for use as electrodes in electrochemical devices";
    Thin Solid Films, 565 (2014), S. 116 - 121.

    Zusätzliche Informationen

  94. Autor/innen: Timo Bohnenberger, E366 - MST; Frank Steinhäußer, E366 - MST; Jovan Matovic, E366 - MST; Ulrich Schmid, E366 - MST

    T. Bohnenberger, F. Steinhäußer, J. Matovic, U. Schmid:
    "Platinated ultrathin films made of carbon nanotubes";
    Microsystem Technologies - Micro- and Nanosystems - Information Storage and Processing Systems, 18 (2012), S. 863 - 868.

    Zusätzliche Informationen

  95. Autor/innen: Christian Bolzmacher, EADS; Karin Bauer, CoAutor - E366-MST; Ulrich Schmid, E366 - MST; M. Hafez, CEA LIST; Helmut Seidel, UNI Saarland, LMM

    C. Bolzmacher, K. Bauer, U. Schmid, M. Hafez, H. Seidel:
    "Displacement amplification of piezoelectric microactuators with a micromachined leverage unit";
    Sensors XXXX, 57 (2010), 1.

    Zusätzliche Informationen

  96. Autor/innen: Christian Bolzmacher, EADS; Karin Bauer, CoAutor - E366-MST; Ulrich Schmid, E366 - MST; M. Hafez, CEA LIST; Helmut Seidel, UNI Saarland, LMM

    C. Bolzmacher, K. Bauer, U. Schmid, M. Hafez, H. Seidel:
    "Robust miniaturized amplification unit for piezoelectric actuators: comparison of single crystal silicon and superelastic nickel titanium as membrane materials";
    Microsystem Technologies - Micro- and Nanosystems - Information Storage and Processing Systems, 16 (2010), 5; S. 847 - 853.

    Zusätzliche Informationen

  97. Autor/innen: Lukas Brandhoff; H. Zirath; Mariugenia Salas; Anna-Elisabeth-Maria Haller, E366 - MNS; Johannes Rudolf Peham, AIT; H. Wiesinger-Mayr, AIT; Andreas Spittler; Guntram Schnetz, Biegler; Walter Lang, IMSAS; Michael J. Vellekoop, Universität Bremen

    L. Brandhoff, H. Zirath, M. Salas, A.E.M. Haller, J. R. Peham, H. Wiesinger-Mayr, A. Spittler, G. Schnetz, W. Lang, M.J. Vellekoop:
    "A multi-purpose ultrasonic streaming mixer for integrated magnetic bead ELISAs";
    Journal of Micromechanics and Microengineering, 25 (2015), 9 S.

    Zusätzliche Informationen

  98. Autor/innen: Martin Brandl; J. Grabner; K.-H. Kellner; Franz Seifert, E366 - MNS; Johann Nicolics, E366 - AEM; S. Grabner; G. Grabner

    Martin Brandl, J. Grabner, K.-H. Kellner, F. Seifert, J. Nicolics, S. Grabner, G. Grabner:
    "A Low-Cost Wireless Sensor System and its Application in Dental Retainers";
    IEEE Sensors Journal, 9 (2009), 3; S. 255 - 262.

  99. Autor/innen: Stefan Brandstetter, E366 - MNS; Christian Riesch, E366 - MNS; E. K. Reichel, JKU Linz - Mikroelec; Bernhard Jakoby, JKU Linz; Franz Keplinger, E366 - MNS

    S. Brandstetter, Ch. Riesch, E. Reichel, B. Jakoby, F. Keplinger:
    "Sensing Viscosity and Density with a Micromachined Suspended Plate Resonator";
    Procedia Chemistry, 1 (2009), S. 1467 - 1470.

  100. Autor/in: Georg Brasseur, E366 - MNS

    G. Brasseur:
    "A Capacitive 4-Turn Angular-Position Sensor";
    IEEE Transactions on Instrumentation and Measurement Technology, 47 (1998), 1; S. 275 - 279.

  101. Autor/in: Georg Brasseur, E366 - MNS

    G. Brasseur:
    "HYC-A Hybrid Concept with Small Lean Burn Engine, Electrically Heated Catalyst and Asynchr. Motor for Enhanced Perform";
    SAE Technical Paper Series, 99 (1999), 01; S. 1330.

  102. Autor/in: Georg Brasseur, E366 - MNS

    G. Brasseur:
    "Modeling of the Front End of a New Capacitive Finger-type Angular Position Sensor";
    IEEE Transactions on Instrumentation and Measurement, Vol. 50 (2001), S. 111 - 116.

  103. Autor/innen: Werner Brenner, E366 - MST; Sladjan Mitic, E366 - MST; R. Ouchkalov; Gordana Popovic, E366 - MST; Aleksandar Vujanic, E366 - MST

    W. Brenner, S. Mitic, R. Ouchkalov, G. Popovic, A. Vujanic:
    "Micro Actuation Principles for Tactile Graphic Displays";
    Medical & Biological Engineering & Computing, 37 (1999), S. 404 - 405.

  104. Autor/innen: Werner Brenner, E366 - MST; Franz Sümecz, E366 - MST; Ana Almansa

    W. Brenner, F. Sümecz, A. Almansa:
    "Advanced methods and tools for handling and assembly in microtechnology - A European approach in FP6";
    Microelectronic Engineering, 83 (2006), 4 - 9; S. 1386 - 1388.

  105. Autor/innen: Falko Brinkmann; Michael Hirtz; Anna-Elisabeth-Maria Haller, E366 - MNS; Tobias M. Gorges; Michael J. Vellekoop, Universität Bremen; Sabine Riethdorf; Volkmar Müller; Klaus Pantel; Harald Fuchs

    F. Brinkmann, M. Hirtz, A.E.M. Haller, T. Gorges, M.J. Vellekoop, S. Riethdorf, V. Müller, K. Pantel, H. Fuchs:
    "A Versatile Microarray Platform for Capturing Rare Cells";
    Scientific Reports, 5 (2015), 15342; S. 1 - 11.

    Zusätzliche Informationen

  106. Autor/innen: W. Bruenger; Hans Löschner; K. Leung; Y. Lee; Peter Hudek; I.W. Rangelow; Günther Stangl, E366 - MNS; Wolfgang Fallmann, E366 - MNS

    W. Bruenger, H. Löschner, K. Leung, Y. Lee, P. Hudek, I. Rangelow, G. Stangl, W. Fallmann:
    "Minimum ion-beam exposure-dose determination for chemically amplified resist from printed dot matrices";
    Journal of Vacuum Science & Technology A, 17 (1999), S. 3119 - 3119.

  107. Autor/innen: W. Bruenger; M. Torkler; C. Dzionk; B. Terris; L. Folks; D. Weller; H. Rothuizen; P. Vettiger; Günther Stangl, E366 - MNS; Wolfgang Fallmann, E366 - MNS

    W. Bruenger, M. Torkler, C. Dzionk, B. Terris, L. Folks, D. Weller, H. Rothuizen, P. Vettiger, G. Stangl, W. Fallmann:
    "Ion Projection Lithography for Resistless Patterning of Thin Magnetic Films";
    Microelectronic Engineering, 53 (2000), 53; S. 605 - 608.

  108. Autor/innen: W. Bruenger; M. Torkler; K. Leung; Y. Lee; M. Williams; Hans Löschner; G. Stengl; Wolfgang Fallmann, E366 - MNS; Fritz Paschke, E366; Günther Stangl, E366 - MNS; I.W. Rangelow; Peter Hudek

    W. Bruenger, M. Torkler, K. Leung, Y. Lee, M. Williams, H. Löschner, G. Stengl, W. Fallmann, F. Paschke, G. Stangl, I. Rangelow, P. Hudek:
    "Resolution improvement of ion projector with a low energy spread multicusp ion source";
    Microelectronic Engineering, 46 (1999), S. 477 - 480.

  109. Autor/innen: Wolfgang Herbert Buchegger, E366 - MNS; Anna-Elisabeth-Maria Haller, E366 - MNS; Sander Van den Driesche, E366 - MNS; Martin Kraft, CTR; Bernhard Lendl, E164 - UPA; Michael J. Vellekoop, E366 - MNS

    W.H. Buchegger, A.E.M. Haller, S. Van den Driesche, M. Kraft, B. Lendl, M. Vellekoop:
    "Studying enzymatic bioreactions in a millisecond micrfluidic flow mixer";
    Biomicrofluidics, 6 (2012), 1; S. 012803-1 - 012803-9.

  110. Autor/innen: Wolfgang Herbert Buchegger, E366 - MNS; Martin Kraft, CTR; Michael J. Vellekoop, E366 - MNS

    W.H. Buchegger, M. Kraft, M. Vellekoop:
    "Characterization of a vertical lamination micromixer for IR spectroscopy";
    Procedia Engineering, 5 (2010), S. 1348 - 1351.

  111. Autor/innen: Wolfgang Herbert Buchegger, E366 - MNS; Michael Rosenauer, E366 - MNS; Michael J. Vellekoop, E366 - MNS

    W.H. Buchegger, M. Rosenauer, M. Vellekoop:
    "Microfluidic measurement system for fluorescent particles with three-dimensional sheat flow and a self-aligned adjustable microlens";
    Procedia Chemistry, 1 (2009), 1123; S. 1126.

  112. Autor/innen: Wolfgang Herbert Buchegger, E366 - MNS; Christoph Wagner, E164 - UPA; Bernhard Lendl, E164 - UPA; Martin Kraft, E164 - AC; Michael J. Vellekoop, E366 - MNS

    W.H. Buchegger, C. Wagner, B. Lendl, M. Kraft, M. Vellekoop:
    "A highly uniform lamination micromixer with wedge shaped inlet channels for time resolved infrared spectroscopy";
    Microfluidics and Nanofluidics, 10 (2011), 4; S. 889 - 897.

  113. Autor/innen: Wolfgang Herbert Buchegger, E366 - MNS; Christoph Wagner, E164 - UPA; Peter Svasek, E366 - MNS; Bernhard Lendl, E164 - UPA; Martin Kraft, CTR; Michael J. Vellekoop, E366 - MNS

    W.H. Buchegger, C. Wagner, P. Svasek, B. Lendl, M. Kraft, M. Vellekoop:
    "Fabrication and characterization of a vertical lamination micromixer for mid-IR spectroscopy";
    Sensors and Actuators B: Chemical, 159 (2011), S. 336 - 341.

  114. Autor/innen: Matthias Budil, E366; E. Guerrero; Thomas Brabec, E387; Siegfried Selberherr, E360; Hans Pötzl, E366

    M. Budil, E. Guerrero, T. Brabec, S. Selberherr, H. Pötzl:
    "A New Model for the Determination of Point Defect Equilibrium Concentrations in Silicon";
    COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 6 (1987), 1; S. 37 - 44.

    Zusätzliche Informationen

  115. Autor/innen: M Capriotti, E362; Peter Willibald Lagger; Clement Fleury, E362; Martin Oposich, E366 - MST; Ole Bethge, E362; C Ostermaier; Gottfried Strasser, E362; Dionyz Pogany, E362

    M. Capriotti, P. Lagger, C. Fleury, M. Oposich, O. Bethge, C. Ostermaier, G. Strasser, D. Pogany:
    "Modeling small-signal response of GaN-based metal-insulator-semiconductor high electron mobility transistor gate stack in spill-over regime: Effect of barrier resistance and interface states";
    Journal of Applied Physics, 117 (2015), 024506; S. 024506-1 - 024506-7.

    Zusätzliche Informationen

  116. Autor/innen: Andrea Casci Ceccacci, TechnUnivDenmark; Ching-Hsiu Chen, AcadSinicaTaiwan; En-Te Hwu, AcadSinicaTaiwan; Lidia Morelli, TechnUnivDenmark; Sanjukta Bose, E366 - MNS; Filippo Giacomo Bosco, TechnUnivDenmark; Silvan Schmid, E366 - MNS; Anja Boisen, TU Denmark

    A. Casci Ceccacci, C.-H. Chen, E.-T. Hwu, L. Morelli, S. Bose, F. G. Bosco, S. Schmid, A. Boisen:
    "Blu-Ray-based micromechanical characterization platform for biopolymer degradation assessment";
    Sensors and Actuators B: Chemical, 241 (2017), S. 1303 - 1309.

    Zusätzliche Informationen

  117. Autor/innen: Samir Cerimovic, E366 - MNS; Roman Beigelbeck, ÖAW; Hannes Antlinger, IMM, JKU; Johannes Schalko, E366 - MNS; Bernhard Jakoby, JKU Linz; Franz Keplinger, E366 - MNS

    S. Cerimovic, R. Beigelbeck, H. Antlinger, J. Schalko, B. Jakoby, F. Keplinger:
    "Sensing viscosity and density of glycerol-water mixtures utilizing a suspended plate MEMS resonator";
    Microsystem Technologies - Micro- and Nanosystems - Information Storage and Processing Systems, 18 (2012), 7-8; S. 1045 - 1056.

  118. Autor/innen: Samir Cerimovic, E366 - MNS; Michael Forstner, E366; Franz Kohl, Acad. of Sciences; Amir Talic, ÖAW; Franz Keplinger, E366 - MNS

    S. Cerimovic, M. Forstner, F. Kohl, A. Talic, F. Keplinger:
    "A Computer Mouse Based on Highly Sensitive Micromachined Flow Sensors";
    Procedia Engineering, 5 (2010), S. 240 - 243.

  119. Autor/innen: Samir Cerimovic, E366 - MNS; Almir Talic, Donau-Uni Krems; Roman Beigelbeck, E366 - MNS; Hannes Antlinger, IMM, JKU; Thilo Sauter, Donau-Uni Krems; Johann Nicolics, E366 - AEM; Bernhard Jakoby, JKU Linz; Franz Keplinger, E366 - MNS

    S. Cerimovic, A. Talic, R. Beigelbeck, H. Antlinger, T. Sauter, J. Nicolics, B. Jakoby, F. Keplinger:
    "Bidirectional micromachined flow sensor featuring a hot film made of amorphous germanium";
    Measurement Science & Technology, 24 (2013), 8; S. 1 - 16.

  120. Autor/innen: Samir Cerimovic, E366 - MNS; Amir Talic, E366 - MNS; Franz Kohl, Acad. of Sciences; Roman Beigelbeck; Artur Jachimowicz

    S. Cerimovic, A. Talic, F. Kohl, R. Beigelbeck, A. Jachimowicz:
    "Micromachined Flow Sensors Enabling Eletrocalorimetric and TOF Transduction";
    Procedia Chemistry, 1 (2009), S. 132 - 135.

  121. Autor/innen: Samir Cerimovic, E366 - MNS; Amir Talic, E366 - MNS; Franz Kohl, Acad. of Sciences; Franz Keplinger, E366 - MNS; Johannes Schalko, E366 - MNS; Artur Jachimowicz, E366 - MNS

    S. Cerimovic, A. Talic, F. Kohl, F. Keplinger, J. Schalko, A. Jachimowicz:
    "FEM-basierte Analyse eines neuen thermischen Strömungssensors mit drei unterschiedlichen Betriebsmoden";
    E&I Elektrotechnik und Informationstechnik, 126 (2009), 1-2; S. 13 - 18.

  122. Autor/innen: S.M. Chehrehrazi; Alireza R. Baghai-Wadji, E366 - MNS

    S.M. Chehrehrazi, A.R. Baghai-Wadji:
    "Calculation of the Frequency Characteristics of Microstrips Discontinuities on Non-Diagonal Anisotropic Substrates Using";
    Applied Computational Electromagnetics Society Journal, 12 (1997), 2; S. 11 - 15.

  123. Autor/innen: M. J. Cordill; A. Taylor; Johannes Schalko, E366 - MNS; G. Dehm

    M. J. Cordill, A. Taylor, J. Schalko, G. Dehm:
    "Fracture and Delamination of Chromium Thin Films on Polymer Substrates";
    Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 41A (2010), S. 870 - 875.

  124. Autor/innen: M. J. Cordill; A. Taylor; Johannes Schalko, E366 - MNS; G. Dehm

    M. J. Cordill, A. Taylor, J. Schalko, G. Dehm:
    "Microstructure and adhesion of as-deposited and annealed Cu/Ti films on polyimide";
    Journal of Materials Research, 102 (2011), 6; S. 729 - 734.

    Zusätzliche Informationen

  125. Autor/innen: E. Corniani, ACēT; Martin Jech, ACēT; F. Ditroi, Atomki; Thomas Wopelka, ACēT; Friedrich Franek, E366 - MST

    E. Corniani, M. Jech, F. Ditroi, T. Wopelka, F. Franek:
    "TLA and wear quantification of an aluminium-silicon-copper alloy for the car industry";
    Wear, 267 (2009), S. 828 - 832.

    Zusätzliche Informationen

  126. Autor/innen: E. Corniani, ACēT; Martin Jech, ACēT; Thomas Wopelka, ACēT; F. Ditroi, Atomki; Friedrich Franek, E366 - MST; Andreas Pauschitz, ACēT

    E. Corniani, M. Jech, T. Wopelka, F. Ditroi, F. Franek, A. Pauschitz:
    "High-resolution wear analysis of a ball-on-disc contact using low-activity radioactive isotopes";
    Proceedings of the Institution of Mechanical Engineers Part C - Journal of Mechanical Engineering Science, 226 (2012), 2; S. 319 - 326.

    Zusätzliche Informationen

  127. Autor/innen: Aleksandra Cvetanovic, E366 - MST; Andreja Cvetanovic; Daniela Andrijasevic, E362; Ioanna Giouroudi; Werner Brenner, E366 - MST

    A Cvetanovic, A. Cvetanovic, D. Andrijasevic, I. Giouroudi, W. Brenner:
    "Development of a novel protective cover for micro manipulation process in the SEM chamber";
    Microsystem Technologies - Micro- and Nanosystems - Information Storage and Processing Systems, 14 (2008), 8; S. 1143 - 1148.

    Zusätzliche Informationen

  128. Autor/innen: Aleksandra Cvetanovic, E366 - MST; Andreja Cvetanovic; Alexander Deutschinger, E366 - MST; Ioanna Giouroudi, E366 - MNS; Werner Brenner, E366 - MST

    A Cvetanovic, A. Cvetanovic, A. Deutschinger, I. Giouroudi, W. Brenner:
    "Design of a novel visual and control system for the prevention of the collision during the micro handling in a SEM chamber";
    Microelectronic Engineering, 87 (2009), 2; S. 139 - 143.

    Zusätzliche Informationen

  129. Autor/innen: Aleksandra Cvetanovic, E366 - MST; Andreja Cvetanovic; Alexander Deutschinger, E366 - MST; Marek Soucek; Daniela Andrijasevic, E362; Werner Brenner, E366 - MST

    A Cvetanovic, A. Cvetanovic, A. Deutschinger, M. Soucek, D. Andrijasevic, W. Brenner:
    "Micro assembly in a SEM chamber and the solution for collision prevention";
    Microsystem Technologies - Micro- and Nanosystems - Information Storage and Processing Systems, 14 (2008), 6; S. 835 - 839.

    Zusätzliche Informationen

  130. Autor/innen: Bernhard Czerny, E164; Ali Mazloum Nejadari, E366; Golta Khatibi, E164; Laurenz Weiss; Michael J. Zehetbauer, Univ. Wien

    B. Czerny, A. Mazloum Nejadari, G. Khatibi, L. Weiss, M.J. Zehetbauer:
    "Fatigue testing method for fine bond wires in an LQFP package";
    Microelectronics Reliability, 64 (2016), 64; S. 270 - 275.

  131. Autor/innen: Alexander Dabsch, E366 - MNS; Christoph Rosenberg, E366 - MNS; Michael Stifter, E366 - MNS; Franz Keplinger, E366 - MNS

    A. Dabsch, C. Rosenberg, M. Stifter, F. Keplinger:
    "MEMS cantilever based magnetic field gradient sensor";
    Journal of Micromechanics and Microengineering, 27 (2017), S. 55014-1 - 55014-8.

  132. Autor/innen: Simone Dalola, Univ. Brescia, Italy; Samir Cerimovic, E366 - MNS; Franz Kohl, Acad. of Sciences; Roman Beigelbeck, ÖAW; Johannes Schalko, E366 - MNS; Vittorio Ferrari, Univ. Brescia, Italy; Daniele Marioli, Univ. Brescia, Italy; Franz Keplinger, E366 - MNS; Thilo Sauter, ÖAW

    S. Dalola, S. Cerimovic, F. Kohl, R. Beigelbeck, J. Schalko, V. Ferrari, D. Marioli, F. Keplinger, T. Sauter:
    "MEMS Thermal Flow Sensor With Smart Electronic Interface Circuit";
    IEEE Sensors Journal, 12 (2012), 12; S. 3318 - 3328.

  133. Autor/innen: Simone Dalola, Univ. Brescia, Italy; Samir Cerimovic, E366 - MNS; Franz Kohl, Acad. of Sciences; Vittorio Ferrari, Univ. Brescia, Italy; Daniele Marioli, Univ. Brescia, Italy; Franz Keplinger, E366 - MNS

    S. Dalola, S. Cerimovic, F. Kohl, V. Ferrari, D. Marioli, F. Keplinger:
    "Highly Sensitive Smart Flow Sensor with Frequency and Duty Cycle Output";
    Procedia Engineering, 5 (2010), S. 528 - 531.

  134. Autor/innen: Mirjana Damnjanovic, Univ. Novi Sad; Goran Stojanovic, Univ. Novi Sad; Ljiljana Zivanov, CoAutor - E366-MST; A. Maric, Uni Novi Sad, Serbia; N. V. Blaz, Univ. Novi Sad; Goran Radosavljevic, E366 - AEM; Walter Smetana, E366 - AEM

    M. Damnjanovic, G. Stojanovic, L. Zivanov, A. Maric, N. V. Blaz, G. Radosavljevic, W. Smetana:
    "Ferrite EMI Chokes in LTCC Technology";
    Berichte aus der Elektrotechnik: Proceedings E!4570 IPCTECH. New Generation of 3-D Integrated Passive Components & Microsystems in LTCC-Technology, 1 (2011), S. 42 - 50.

  135. Autor/innen: Mirjana Damnjanovic, Univ. Novi Sad; Lj. Zivanov; Snezana Djuric, Uni Novi Sad; A. Maric, Uni Novi Sad, Serbia; Aleksandar B. Menicanin, Uni Novi Sad; Goran Radosavljevic, E366 - AEM; N. Blaz

    M. Damnjanovic, L. Zivanov, S. Djuric, A. Maric, A. B. Menicanin, G. Radosavljevic, N. Blaz:
    "Characterization and modelling of miniature ferrite transformer for high frequency applications";
    Microelectronics International, 29 (2012), 2; S. 83 - 89.

  136. Autor/innen: Predrag Dasic; Friedrich Franek, E366 - MST; Emilia Assenova; Miroslav Radovanovic

    P. Dasic, F. Franek, E. Assenova, M. Radovanovic:
    "International standardization and organization in the field of tribology";
    Industrial Lubrication and Tribology, 55 (2003), 6; S. 287 - 291.

  137. Autor/innen: David Dergez, E366 - MST; Johannes Schalko, E366 - MNS; Achim Bittner, E366 - MST; Ulrich Schmid, E366 - MST

    D. Dergez, J. Schalko, A. Bittner, U. Schmid:
    "Fundamental properties of a-SiNx:H thin films deposited by ICP-PECVD for MEMS applications";
    Applied Surface Science, 284 (2013), S. 348 - 353.

    Zusätzliche Informationen

  138. Autor/innen: David Dergez, E366 - MST; Johannes Schalko, E366 - MNS; Stefan Löffler, E057B; Achim Bittner, E366 - MST; Ulrich Schmid, E366 - MST

    D. Dergez, J. Schalko, S. Löffler, A. Bittner, U. Schmid:
    "Impact of auxiliary capacitively coupled plasma on the properties of ICP-CVD deposited a-SiNx:H thin films";
    Sensors and Actuators A: Physical, 224 (2015), S. 156 - 162.

    Zusätzliche Informationen

  139. Autor/innen: David Dergez, E366 - MST; Michael Schneider, E366 - MST; Achim Bittner, E366 - MST; Natalia Pawlak; Ulrich Schmid, E366 - MST

    D. Dergez, M. Schneider, A. Bittner, N. Pawlak, U. Schmid:
    "Mechanical and electrical properties of RF magnetron sputter deposited amorphous silicon-rich silicon nitride thin films";
    Thin Solid Films, 606 (2016), S. 7 - 12.

    Zusätzliche Informationen

  140. Autor/innen: David Dergez, E366 - MST; Michael Schneider, E366 - MST; Achim Bittner, E366 - MST; Ulrich Schmid, E366 - MST

    D. Dergez, M. Schneider, A. Bittner, U. Schmid:
    "Mechanical and electrical properties of DC magnetron sputter deposited amorphous silicon nitride thin films";
    Thin Solid Films, 589 (2015), S. 227 - 232.

    Zusätzliche Informationen

  141. Autor/innen: R. Derntl, E141; Michael Schneider, E366 - MST; Johannes Schalko, E366 - MNS; Achim Bittner, E366 - MST; Hannes-Jörg Schmiedmayer, E141 - QuO; Ulrich Schmid, E366 - MST; Michael Trupke, E141 - QuO

    R. Derntl, M. Schneider, J. Schalko, A. Bittner, H.-J. Schmiedmayer, U. Schmid, M. Trupke:
    "Arrays of open, independently tunable microcavities";
    Optics Express, 22 (2014), 18; S. 2212001 - 2212010.

  142. Autor/in: Helmut Detter, E366 - MST

    H. Detter:
    "So bleibt Österreich konkurrenzfähig";
    Austria Innovativ, 06 (2003), S. 08 - 10.

  143. Autor/innen: Helmut Detter, E366 - MST; Gordana Popovic, E366 - MST; Anton Köck

    H. Detter, G. Popovic, A. Köck:
    "Mikrosystemtechnik - Forschung, Entwicklung und Ausbildung in Österreich";
    Elektrotechnik und Informationstechnik (e&i), 09 (1999), S. 522 - 527.

  144. Autor/innen: Alexander Deutschinger, E366 - MST; Ulrich Schmid, E366 - MST; Michael Schneider, E366 - MST; Werner Brenner, E366 - MST; Heinz D. Wanzenböck, E362; Burkhard E. Volland; Tzvetan Ivanov; I.W. Rangelow

    A. Deutschinger, U. Schmid, M. Schneider, W. Brenner, H. D. Wanzenböck, B. Volland, T. Ivanov, I. Rangelow:
    "Characterization of an electro-thermal micro gripper and tip sharpening using FIB technique";
    Microsystem Technologies - Micro- and Nanosystems - Information Storage and Processing Systems, 16 (2010), 11; S. 1901 - 1908.

    Zusätzliche Informationen

  145. Autor/innen: J. Devkota, Univ. South Florida; Georgios Kokkinis, E366 - MNS; Theocharis Berris, E366 - MNS; Murad Aziz Jamalieh, E366 - MNS; Susana F. Cardoso, INESC Lisbon; H. Srikanth, Univ. South Florida; M.H. Phan, Univ. South Florida; Ioanna Giouroudi, E366 - MNS

    J. Devkota, G. Kokkinis, T. Berris, M. Jamalieh, S. F. Cardoso, H. Srikanth, M.H. Phan, I. Giouroudi:
    "A novel approach for detection and quantification of magnetic nanomarkers using a spin valve GMR-integrated microfluidic sensor";
    RSC Advances, 5 (2015), S. 51169 - 51175.

  146. Autor/in: Yuri S. Didosyan, E366 - AEM

    Y. Didosyan:
    "Temperature characteristics of a new magneto-optical current transformer";
    International Journal of Applied Electromagnetics and Mechanics, 13 (2002), S. 277 - 283.

  147. Autor/innen: Yuri S. Didosyan, E366 - AEM; V.Y. Barash; N.A. Bovarin; Hans Hauser, E366 - AEM; Paul L. Fulmek, E366 - AEM

    Y. Didosyan, V. Barash, N. Bovarin, H. Hauser, P. Fulmek:
    "Magnetic Field Sensor by Orthoferrites";
    Sensors XXXX, 59 (1997), S. 59 - 60.

  148. Autor/innen: Yuri S. Didosyan, E366 - AEM; Hans Hauser, E366 - AEM

    Y. Didosyan, H. Hauser:
    "Anwendungen transparenter Magnete";
    Elektrotechnik und Informationstechnik (e&i), 115 (1998), S. 378 - 381.

  149. Autor/innen: Yuri S. Didosyan, E366 - AEM; Hans Hauser, E366 - AEM

    Y. Didosyan, H. Hauser:
    "Observation of Bloch Lines in Yttrium Orthoferrite";
    Physics Letters A, 238 (1998), S. 395 - 397.

  150. Autor/innen: Yuri S. Didosyan, E366 - AEM; Hans Hauser, E366 - AEM; V.Y. Barash; Paul L. Fulmek, E366 - AEM

    Y. Didosyan, H. Hauser, V. Barash, P. Fulmek:
    "Domain Wall Dynamics of Yttrium Orthoferrite";
    Journal de Physique IV, 8 (1998), S. 693 - 696.

  151. Autor/innen: Yuri S. Didosyan, E366 - AEM; Hans Hauser, E366 - AEM; V.Y. Barash; Paul L. Fulmek, E366 - AEM

    Y. Didosyan, H. Hauser, V. Barash, P. Fulmek:
    "Subsonic Domain Wall Dynamics of Yttrium Orthoferrite";
    Journal of Magnetism and Magnetic Materials, 177 (1998), S. 203 - 204.

  152. Autor/innen: Yuri S. Didosyan, E366 - AEM; Hans Hauser, E366 - AEM; W. Fiala; Johann Nicolics, E366 - AEM; Walter Toriser, E366

    Y. Didosyan, H. Hauser, W. Fiala, J. Nicolics, W. Toriser:
    "Latching type optical switch";
    Journal of Applied Physics, 91 (2002), 10; S. 7000 - 7002.

  153. Autor/innen: Yuri S. Didosyan, E366 - AEM; Hans Hauser, E366 - AEM; Friedrich Haberl, E366 - AEM

    Y. Didosyan, H. Hauser, F. Haberl:
    "Magneto-optical current transformer of high bandwidth and large temperature range";
    Sensors XXXX, 92 (2001), S. 67 - 73.

  154. Autor/innen: Yuri S. Didosyan, E366 - AEM; Hans Hauser, E366 - AEM; Johann Nicolics, E366 - AEM; Friedrich Haberl, E366 - AEM

    Y. Didosyan, H. Hauser, J. Nicolics, F. Haberl:
    "Application of Orthoferrites for Light Spot Position Measurements";
    Journal of Applied Physics, 87 (2000), S. 7079 - 7081.

  155. Autor/innen: Yuri S. Didosyan, E366 - AEM; Hans Hauser, E366 - AEM; Johann Nicolics, E366 - AEM; Igor R. Yavorsky

    Y. Didosyan, H. Hauser, J. Nicolics, I. Yavorsky:
    "Light Diffraction by a Single Domain Wall";
    Journal of Magnetism and Magnetic Materials, 203 (1999), S. 247 - 249.

  156. Autor/innen: Yuri S. Didosyan, E366 - AEM; Hans Hauser, E366 - AEM; Johann Nicolics, E366 - AEM; V.Y. Barash; Paul L. Fulmek, E366 - MNS

    Y. Didosyan, H. Hauser, J. Nicolics, V. Barash, P.L. Fulmek:
    "Magneto-optical Current Sensor by Domain Wall Motion in Orthoferrites";
    IEEE Transactions on Instrumentation and Measurement, 49 (2000), S. 14 - 18.

  157. Autor/innen: Yuri S. Didosyan, E366 - AEM; Hans Hauser, E366 - AEM; Johann Nicolics, E366 - AEM

    Y. Didosyan, H. Hauser, J. Nicolics:
    "Magneto-optical Current Sensors of High Bandwidth";
    Sensors XXXX, 81 (2000), S. 263 - 267.

  158. Autor/innen: Yuri S. Didosyan, E366 - AEM; Hans Hauser, E366 - AEM; Johann Nicolics, E366 - AEM; Gernot Hanreich, E366 - AEM; Holger Wolfmayr, E366

    Y. Didosyan, H. Hauser, J. Nicolics, G. Hanreich, H. Wolfmayr:
    "Magneto-Optical method for Measuring Mechanical Quantities";
    IEEE Transactions on Instrumentation and Measurement, 51 (2002), 4; S. 730 - 733.

  159. Autor/innen: Yuri S. Didosyan, E366 - AEM; Hans Hauser, E366 - AEM; N. Papanicolaou; Georg Reider, E387

    Y. Didosyan, H. Hauser, N. Papanicolaou, G.A. Reider:
    "Investigations of lines in domain walls of yttrium orthoferrite";
    Journal of Applied Physics, 91 (2002), 10; S. 7302 - 7304.

  160. Autor/innen: Yuri S. Didosyan, E366 - AEM; Hans Hauser, E366 - AEM; Georg Reider, E387

    Y. Didosyan, H. Hauser, G.A. Reider:
    "Lines of zero magnetization and domain wall inclinations in yttrium orthoferrite";
    International Journal of Applied Electromagnetics and Mechanics, 13 (2002), S. 215 - 218.

  161. Autor/innen: Yuri S. Didosyan, E366 - AEM; Hans Hauser, E366 - AEM; Georg Reider, E387

    Y. Didosyan, H. Hauser, G.A. Reider:
    "Magnetooptic Switch Based on Domain Wall Motion in Orthoferrites";
    IEEE Transactions on Magnetics, 38 (2002), 5; S. 3243 - 3245.

  162. Autor/innen: Yuri S. Didosyan, E366 - AEM; Hans Hauser, E366 - AEM; Georg Reider, E387

    Y. Didosyan, H. Hauser, G.A. Reider:
    "Magnetooptical switches";
    Trans. Magn. Soc. Jpn., 4 (2004), 4-2; S. 334 - 338.

  163. Autor/innen: Yuri S. Didosyan, E366 - AEM; Hans Hauser, E366 - AEM; Georg Reider, E387; Ronald Glatz, E366; Holger Wolfmayr, E366

    Y. Didosyan, H. Hauser, G.A. Reider, R. Glatz, H. Wolfmayr:
    "Magnetization reversal and aftereffect in orthoferrites";
    Journal of Applied Physics, 93 (2003), 10; S. 8755 - 8757.

  164. Autor/innen: Yuri S. Didosyan, E366 - AEM; Hans Hauser, E366 - AEM; Georg Reider, E387; Walter Toriser, E366

    Y. Didosyan, H. Hauser, G.A. Reider, W. Toriser:
    "Fast latching type optical swith";
    Journal of Applied Physics, 95 (2004), 11; S. 7339 - 7341.

  165. Autor/innen: Yuri S. Didosyan, E366 - AEM; Hans Hauser, E366 - AEM; Holger Wolfmayr, E366; Johann Nicolics, E366 - AEM; Paul L. Fulmek, E366 - AEM

    Y. Didosyan, H. Hauser, H. Wolfmayr, J. Nicolics, P. Fulmek:
    "Magneto-optical totational speed sensor";
    Sensors XXXX, 106 (2003), S. 168 - 171.

  166. Autor/innen: Yuri S. Didosyan, E366 - AEM; Hans Hauser, E366 - AEM; Holger Wolfmayr, E366; Walter Toriser, E366

    Y. Didosyan, H. Hauser, H. Wolfmayr, W. Toriser:
    "Magnetooptical Measurements of Magnetic Fields and Mechanical Quantities";
    Journal of Electrical Engineering (eingeladen), 53 (2002), 10/S; S. 13 - 16.

  167. Autor/innen: Yuri S. Didosyan, E366 - AEM; Georg Reider, E387; Hans Hauser, E366 - AEM

    Y. Didosyan, G. Reider, H. Hauser:
    "Bloch Lines in Domain Walls of Yttrium Orthoferrite";
    Journal of Applied Physics, 85 (1999), S. 5989 - 5991.

  168. Autor/innen: Zoran Djinovic, E366 - MST; M.C. Tomic

    Z. Djinovic, M.C. Tomic:
    "Interferometric Measurement of Nanoliter Volume Concentration of Binary Liquid Mixtures";
    E&I Elektrotechnik und Informationstechnik, 126 (2009), 1-2; S. 42 - 46.

  169. Autor/innen: M. Drzik; Hans Löschner; E. Haugeneder; Wolfgang Fallmann, E366 - MNS; Peter Hudek; E. Rangelow; Y. Sarov; T. Lalinsky; J. Chlpik

    M. Drzik, H. Löschner, E. Haugeneder, W. Fallmann, P. Hudek, E. Rangelow, Y. Sarov, T. Lalinsky, J. Chlpik:
    "Mechanical characterization of membrane like microelectronic components";
    Microelectronic Engineering, 83 (2006), 4-9; S. 1036 - 1042.

  170. Autor/in: Thomas Eberharter, E366 - MNS

    T. Eberharter:
    "Kapazitiver Drehwinkelgeber";
    Elektrotechnik und Informationstechnik (e&i), 114 (1997), 11; S. 716 - 716.

  171. Autor/innen: Stefan Eder-Kapl; Hans Löschner; Michaela Zeininger; Wolfgang Fallmann, E366 - MNS; Oliver Kirch; George P. Patsis; V. Constantoudis; Evangelos Gogolides

    S. Eder-Kapl, H. Löschner, M. Zeininger, W. Fallmann, O. Kirch, G. Patsis, V. Constantoudis, E. Gogolides:
    "Line edge roughness investigation on hcemically amplified resist materials with masked helium ion beam lithography";
    Microelectronic Engineering, 73-74 (2004), S. 252 - 258.

  172. Autor/innen: M. Edetsberger, Max. F. Perutz Lab; I. Atassi, E366 - AEM; Bruno Balluch, E366 - AEM; Walter Smetana, E366 - AEM; G. Köhler, Max. F. Perutz Lab

    M. Edetsberger, I. Atassi, B. Balluch, W. Smetana, G. Köhler:
    "A Biodevice for Real Time Cell Observation Fabricated in LTCC Technology";
    Berichte aus der Elektrotechnik: Proceedings E!4570 IPCTECH. New Generation of 3-D Integrated Passive Components & Microsystems in LTCC-Technology, 1 (2011), S. 27 - 32.

  173. Autor/innen: M. Edetsberger, Max. F. Perutz Lab; E. Gaubitzer, Max. F. Perutz Lab; Christoph Miksch, Max F. Perutz Lab; Martin Knapp, OnkoTec; Bruno Balluch, E366 - AEM; K. E. Gvichiya; I. Atassi, E366 - AEM; Walter Smetana, E366 - AEM; G. Köhler, Max. F. Perutz Lab

    M. Edetsberger, E. Gaubitzer, C. Miksch, M. Knapp, B. Balluch, K. Gvichiya, I. Atassi, W. Smetana, G. Köhler:
    "Detection of Malign Cells in Bio-Fluids for Diagnostic Purposes";
    Berichte aus der Elektrotechnik: Proceedings E!4570 IPCTECH. New Generation of 3-D Integrated Passive Components & Microsystems in LTCC-Technology, 1 (2011), S. 19 - 26.

  174. Autor/innen: E. Eisermann, ESL Europe; K. Höll, AB Mikroelektronik; Walter Smetana, E366 - AEM; W. Tusler, AB Mikroelektronik; Michael Unger, E366 - AEM; J. Whitmarsh

    E. Eisermann, K. Höll, W. Smetana, W. Tusler, M. Unger, J. Whitmarsh:
    "Comparison of low cost, insulated aluminium substrates used as integrated heat sinks with conventional technology";
    Microelectronics International, 26 (2009), S. 2:3 - 2:9.

  175. Autor/innen: A. Elefsiniotis, E366 - MST; Thomas Becker, EADS; Ulrich Schmid, E366 - MST

    A. Elefsiniotis, Th. Becker, U. Schmid:
    "Thermoelectric Energy Harvesting Using Phase Change Materials (PCMs) in High Temperature Environments in Aircraft";
    Journal of Electronic Materials, 43 (2014), 6; S. 1809 - 1814.

    Zusätzliche Informationen

  176. Autor/innen: A. Elefsiniotis, E366 - MST; M. E. Kiziroglou; S. W. Wright; T. T. Toh; Thomas Becker, EADS; E. M. Yeatman; Ulrich Schmid, E366 - MST

    A. Elefsiniotis, M. Kiziroglou, S. Wright, T. Toh, Th. Becker, E. Yeatman, U. Schmid:
    "Performance evaluation of a thermoelectric energy harvesting device using various phase change materials";
    IOP Journal of Physics: Conference Series, 476 (2013), 012020.

    Zusätzliche Informationen

  177. Autor/innen: A. Elefsiniotis, E366 - MST; N. Kokorakis, EADS; Thomas Becker, EADS; Ulrich Schmid, E366 - MST

    A. Elefsiniotis, N. Kokorakis, Th. Becker, U. Schmid:
    "A thermoelectric-based energy harvesting module with extended operational temperature range for powering autonomous wireless sensor nodes in aircraft";
    Sensors and Actuators A: Physical, 206 (2014), S. 159 - 164.

    Zusätzliche Informationen

  178. Autor/innen: A. Elefsiniotis, E366 - MST; Dominik Samson, E366 - MST; Thomas Becker, EADS; Ulrich Schmid, E366 - MST

    A. Elefsiniotis, D. Samson, Th. Becker, U. Schmid:
    "Investigation of the Performance of Thermoelectric Energy Harvesters Under Real Flight Conditions";
    Journal of Electronic Materials, 42 (2013), 7; S. 2301 - 2305.

    Zusätzliche Informationen

  179. Autor/innen: A. Elefsiniotis, E366 - MST; M. Weiss; Thomas Becker, EADS; Ulrich Schmid, E366 - MST

    A. Elefsiniotis, M Weiss, Th. Becker, U. Schmid:
    "Efficient Power Management for Energy-Autonomous Wireless Sensor Nodes for Aeronautical Applications";
    Journal of Electronic Materials, 42 (2013), 7; S. 1907 - 1910.

    Zusätzliche Informationen

  180. Autor/innen: Herbert Ernst; Artur Jachimowicz, E366 - MNS; Gerald Urban

    H. Ernst, A. Jachimowicz, G. Urban:
    "Dynamic thermal sensor principles in MEMS for fluid characterization";
    IEEE Sensors Journal, 1 (2001), 4; S. 361 - 367.

    Zusätzliche Informationen

  181. Autor/innen: Herbert Ernst; Artur Jachimowicz, E366 - MNS; Gerald Urban

    H. Ernst, A. Jachimowicz, G. Urban:
    "High resolution flow characterization in Bio-MEMS";
    Sensors XXXX, 100 (2002), S. 54 - 62.

  182. Autor/innen: Dorin Esinenco; E. Budianu, IMT; Irina Bineva, IMT; Daniela Andrijasevic, E366 - MST; E. Manea, IMT; Werner Brenner, E366 - MST; Raluca Müller, IMT

    D. Esinenco, E Budianu, I. Bineva, D. Andrijasevic, E. Manea, W. Brenner, R. Müller:
    "Integrated optical proximity microsensor";
    Journal of Luminescence, 121 (2006), 2; S. 394 - 398.

    Zusätzliche Informationen

  183. Autor/innen: J.H. Espina-Hernández; Roland Grössinger, E138; M. Kato; Hans Hauser, E366 - AEM; E. Estévez-Rams

    J.H. Espina-Hernández, R. Grössinger, M. Kato, H. Hauser, E. Estévez-Rams:
    "New sensors for measuring M and H in high magnetic fields";
    Physica B: Condensed Matter, 346 - 347 (2004), S. 543 - 547.

    Zusätzliche Informationen

  184. Autor/innen: Martin Evanzin, E366 - AEM; Yuri S. Didosyan, E366 - AEM; Hans Hauser, E366 - AEM

    M. Evanzin, Y. Didosyan, H. Hauser:
    "Magneto-Optical Hysteresis Measurements and Calculations of Orthoferrites";
    Journal of Electrical Engineering, 55 (2004), 10/S; S. 16 - 19.

  185. Autor/innen: Martin Evanzin, E366 - AEM; Hans Hauser, E366 - AEM; Yuri S. Didosyan, E366 - AEM

    M. Evanzin, H. Hauser, Y. Didosyan:
    "Calculation and measurement of the magnetization process in orthoferrites";
    Physica B: Condensed Matter, 343 (2004), S. 75 - 79.

  186. Autor/innen: Tibor Fabian, E366 - MNS; Georg Brasseur, E366 - MNS

    T. Fabian, G. Brasseur:
    "A Measurement Algorithm for Capacitive Angular Speed Encoder with a Modified Front-End Topology";
    IEEE Transactions on Instrumentation and Measurement Technology, 47 (1998), 5; S. 1341 - 1343.

  187. Autor/innen: Tibor Fabian, E366 - MNS; Georg Brasseur, E366 - MNS

    T. Fabian, G. Brasseur:
    "A Robust Capacitive Angular Speed Sensor";
    IEEE Transactions on Instrumentation and Measurement Technology, 47 (1998), 1; S. 280 - 284.

  188. Autor/innen: Wolfgang Fallmann, E366 - MNS; Peter Hudek; I. Kostic; A. Neubauer; D. Pum; I.W. Rangelow; Karl Riedling, E366; Friedrich Rüdenauer; U.B. Sleytr; Günther Stangl, E366 - MNS

    W. Fallmann, P. Hudek, I. Kostic, A. Neubauer, D. Pum, I. Rangelow, K. Riedling, F. Rüdenauer, U.B. Sleytr, G. Stangl:
    "Mikrotechnik für Raumfahrtanwendungen; in `Trends in der Mikrotechnikī";
    Elektrotechnik und Informationstechnik (e&i), 115 (1998), 7/8; S. 349 - 353.

  189. Autor/innen: G. E. Fantner, EPFL; W. Schumann; R. J. Barbero; Alexander Deutschinger, E366 - MST; V. Todorov; D. S. Gray; I.W. Rangelow; K. Youcef-Toumi

    G. Fantner, W. Schumann, R. Barbero, A. Deutschinger, V. Todorov, D. Gray, I. Rangelow, K. Youcef-Toumi:
    "Use of self-actuating and self-sensing cantilevers for imaging biological samples in fluid";
    Nanotechnology, 20 (2009).

    Zusätzliche Informationen

  190. Autor/in: Gerhard Fasching, E366 - AEM

    G. Fasching:
    "Sprache ohne Gewißheit - Gewißheit ohne Sprache";
    Wiener Klinische Wochenschrift (eingeladen), 109 (1997), 17; S. 692 - 699.

  191. Autor/innen: M. Fasching; Johann Nicolics, E366 - AEM

    M. Fasching, J. Nicolics:
    "Thermische Analyse des Pulslastverhaltens von Drahtwiderständen";
    Plus, 11 (2009), 1; S. 179 - 184.

  192. Autor/innen: Rainer Fasching, E366 - MNS; Franz Keplinger, E366 - MNS; Gernot Hanreich, E366 - AEM; G. Jobst; Gerald Urban; Franz Kohl, E366 - MNS; Rupert Chabicovsky, E366 - MNS

    R. Fasching, F. Keplinger, G. Hanreich, G. Jobst, G. Urban, F. Kohl, R. Chabicovsky:
    "A novel miniaturized sensor for carbon dioxide dissolved in liquids";
    Sensors and Actuators B: Chemical, 78 (2001), S. 291 - 297.

  193. Autor/innen: Rainer Fasching; Franz Kohl, E366 - MNS; Gerald Urban

    R. Fasching, F. Kohl, G. Urban:
    "A miniaturized amperometric CO 2 sensor based on dissociation of copper complexes";
    Sensors and Actuators B: Chemical, 93 (2003), S. 197 - 204.

  194. Autor/innen: Georg Fercher, E366 - MNS; Anna-Elisabeth-Maria Haller, E366 - MNS; Walter Smetana, E366 - AEM; Michael J. Vellekoop, E366 - MNS

    G. Fercher, A.E.M. Haller, W. Smetana, M. Vellekoop:
    "Ceramic capillary electrophoresis chip for the measurement of inorganic ions in water samples";
    Analyst, 135 (2010), 6 S.

  195. Autor/innen: Georg Fercher, E366 - MNS; Anna-Elisabeth-Maria Haller, E366 - MNS; Walter Smetana, E366 - AEM; Michael J. Vellekoop, E366 - MNS

    G. Fercher, A.E.M. Haller, W. Smetana, M. Vellekoop:
    "End-to-End Differential Contactless Conductivity Sensor for Microchip Capillary Eletrophoresis";
    Analytical Chemistry, 82 (2010), 8; 5 S.

  196. Autor/innen: Georg Fercher, E366 - MNS; Walter Smetana, E366 - AEM; Michael J. Vellekoop, E366 - MNS

    G. Fercher, W. Smetana, M. Vellekoop:
    "Kapillarelektrophoresesystem aus Keramik zur Messung von Ionenkonzentrationen";
    E&I Elektrotechnik und Informationstechnik, 126 (2009), 1-2; S. 37 - 41.

  197. Autor/innen: Georg Fercher, E366 - MNS; Walter Smetana, E366 - AEM; Michael J. Vellekoop, E366 - MNS

    G. Fercher, W. Smetana, M. Vellekoop:
    "Microchip electrophoresis in low-temperature co-fired ceramics technology with contactless conductivity measurement";
    Electrophoresis, 30 (2009), 14; S. 2516 - 2522.

  198. Autor/innen: Christian Flachberger, E366; Paul Panek, E366; Wolfgang Zagler, E366

    C. Flachberger, P. Panek, W.L. Zagler:
    "Das Technische Assistenzsystem - Unterstützung der Selbständigkeit bewegungs- und mehrfachbehinderter Personen";
    it&ti, 37 (1997), 2; S. 39 - 43.

  199. Autor/innen: L. Follens; Erwin Reichel; Christian Riesch, E366 - MNS; J. Vermant; Johan Martens; C. Kirschhock; Bernhard Jakoby, JKU Linz

    L. Follens, E. Reichel, Ch. Riesch, J. Vermant, J. A. Martens, C. Kirschhock, B. Jakoby:
    "Viscosity sensing in heated alkaline zeolite synthesis media";
    Physical Chemistry Chemical Physics, 11 (2009), S. 2854 - 2857.

  200. Autor/innen: Michael Forstner, E366; Franz Keplinger, E366 - MNS; Samir Cerimovic, E366 - MNS; Franz Kohl, E366 - MNS

    M. Forstner, F. Keplinger, S. Cerimovic, F. Kohl:
    "Computerunterstützte Entwicklung einer auf Strömungssensoren basierenden PC-Maus";
    E&I Elektrotechnik und Informationstechnik, 6 (2010), S. 158 - 163.

  201. Autor/innen: E. Fortunato; P. Teodoro; V. Silva; I. Ferreira; Y. Nunes; N. Guimaraes; F. Soares; Gordana Popovic, E366 - MST; Werner Brenner, E366 - MST; R. Martins

    E. Fortunato, P. Teodoro, V. Silva, I. Ferreira, Y. Nunes, N. Guimaraes, F. Soares, G. Popovic, W. Brenner, R. Martins:
    "Performances of an optical rule based on 1D a-Si:H position sensitive detectors produced using different metal contacts.";
    Tribologie und Schmierungstechnik, No. 4 Vol 80 (2000), S. 765 - 774.

  202. Autor/innen: Helmut Frais-Kölbl, E366 - AEM; Hans Hauser, E366 - AEM

    H. Frais-Kölbl, H. Hauser:
    "Magnetization Curves of Amorphous Video Heads";
    Journal de Physique IV, 8 (1998), S. 689 - 692.

  203. Autor/innen: Helmut Frais-Kölbl, E366 - AEM; Hans Hauser, E366 - AEM; Paul L. Fulmek, E366 - AEM

    H. Frais-Kölbl, H. Hauser, P. Fulmek:
    "Magnetization Curves of Amorphous Sandwich Video-Heads";
    Journal of Magnetism and Magnetic Materials, 183 (1998), S. 345 - 347.

  204. Autor/in: Friedrich Franek, E366 - MST

    F. Franek:
    "SIKOMET SM21 Metall/Metall-Paarung";
    Technische Information; Sikov Medizintechnik; Wien, 1/96 (1996), S. 1 - 8.

  205. Autor/innen: Friedrich Franek, E366 - MST; Ewald Badisch, ACēT; M. Kirchgaßner

    F. Franek, E. Badisch, M. Kirchgaßner:
    "Advanced Methods for Characterisation of Abrasion/Erosion Resistance of Wear Protection Materials";
    FME Transactions (eingeladen), 37 (2009), 2; S. 61 - 70.

    Zusätzliche Informationen

  206. Autor/innen: Friedrich Franek, E366 - MST; Alexander Neuhaus, ACēT; Martin Reichart; Clemens Schrank, ACēT

    F. Franek, A. Neuhaus, M Reichart, C. Schrank:
    "Mechatronical systems and experimental methods for investigations on tribology of electrical contacts";
    Mechanical Systems and Signal Processing, 22 (2008), 6; S. 1345 - 1355.

    Zusätzliche Informationen

  207. Autor/innen: Friedrich Franek, E366 - MST; Andreas Pauschitz, E366 - MST

    F. Franek, A. Pauschitz:
    "Lebensdauererwartungen bei Lagerungen der Mikro- und Feinwerktechnik";
    Tribologie und Schmierungstechnik, 04/00 (2000), S. 51 - 58.

  208. Autor/innen: Friedrich Franek, E366 - MST; Andreas Pauschitz, ACēT

    F. Franek, A. Pauschitz:
    "Metallische und polymere Gleitelemente am Beispiel ausgewählter tribologischer Untersuchungen";
    Tribologie und Schmierungstechnik (eingeladen), 56 (2009), 5; S. 5 - 23.

    Zusätzliche Informationen

  209. Autor/innen: Friedrich Franek, E366 - MST; Andreas Pauschitz, ACēT

    F. Franek, A. Pauschitz:
    "PROFILE- European Center of Tribology";
    Public Service Review: European Science and Technology, Issue 15 (2012).

  210. Autor/innen: Friedrich Franek, E366 - MST; G. Vorlaufer, ACēT; Wilfried Edelbauer, ACēT; Sasa Bukovnik, ACēT

    F. Franek, G. Vorlaufer, W. Edelbauer, S. Bukovnik:
    "Simulation of Tribosystems and Tribometrology";
    Tribology in Industry, 29 (2009), 1 & 2; S. 3 - 12.

    Zusätzliche Informationen

  211. Autor/innen: Friedrich Franek, E366 - MST; G. Vorlaufer, ACēT; Astrid Stadler, ACēT; Martin Jech, ACēT; Thomas Wopelka, ACēT

    F. Franek, G. Vorlaufer, A. Stadler, M. Jech, T. Wopelka:
    "Modelling and Simulation Assisted Tribometrology";
    Tribology in Industry, 30 (2009), 3 & 4; S. 37 - 47.

    Zusätzliche Informationen

  212. Autor/innen: Andrea F. Franz; Gerhard Franz, E366; Siegfried Selberherr, E360; Ch. Ringhofer; Peter A. Markowich

    A.F. Franz, G. Franz, S. Selberherr, Ch. Ringhofer, P. Markowich:
    "Finite Boxes - A Generalization of the Finite Difference Method Suitable for Semiconductor Device Simulation";
    IEEE Transactions on Electron Devices, 30 (1983), 9; S. 1070 - 1082.

    Zusätzliche Informationen

  213. Autor/innen: Manuela Franz, E366 - AEM; Paul L. Fulmek, E366 - AEM; Hans Hauser, E366 - AEM

    M. Franz, P. Fulmek, H. Hauser:
    "Magnetic Quality Control of Relays and Their Parts";
    Journal of Electrical Engineering, 45 (1994), 8; S. 113 - 118.

  214. Autor/innen: Manuela Franz, E366 - AEM; Michael Weilguni, E366 - AEM

    M. Franz, M. Weilguni:
    "Energy consumption and CO2 emissions in the life cycle of LTCC substrates based on small batch production";
    E&I Elektrotechnik und Informationstechnik, 128 (2011), 11-12; S. 404 - 407.

  215. Autor/innen: Sören Fricke, EADS Innovation Work; Alois Friedberger, EADS Innovation Work; Gerhard Müller, CoAutor - E366-MST; Wolfgang Brode, CoAutor - E366-MST; Helmut Seidel, UNI Saarland, LMM; Ulrich Schmid, E366 - MST

    S. Fricke, A. Friedberger, G. Müller, W. Brode, H. Seidel, U. Schmid:
    "Electrical Performance of Alumina Thin Films for High-Temperature Pressure Cells With a Metallic Body";
    IEEE Sensors Journal, 10 (2010), 5; S. 918 - 923.

    Zusätzliche Informationen

  216. Autor/innen: Sören Fricke, EADS Innovation Work; Alois Friedberger, EADS Innovation Work; Ulrich Schmid, E366 - MST

    S. Fricke, A. Friedberger, U. Schmid:
    "The influence of plasma power on the temperature-dependant conductivity and on the wet chemical etch rate of sputter-deposited alumina thin films";
    Surface & Coatings Technology, 203 (2009), S. 2830 - 2834.

    Zusätzliche Informationen

  217. Autor/innen: Sören Fricke, EADS Innovation Work; Alois Friedberger, EADS Innovation Work; Helmut Seidel, UNI Saarland, LMM; Ulrich Schmid, E366 - MST

    S. Fricke, A. Friedberger, H. Seidel, U. Schmid:
    "A robust pressure sensor for harsh environmental applications";
    Sensors XXXX, 184 (2012), S. 16 - 21.

    Zusätzliche Informationen

  218. Autor/innen: Sören Fricke, EADS Innovation Work; Alois Friedberger, EADS Innovation Work; Helmut Seidel, UNI Saarland, LMM; Ulrich Schmid, E366 - MST

    S. Fricke, A. Friedberger, H. Seidel, U. Schmid:
    "High temperature measurement set-up for the electro-mechanical characterization of robust thin film systems";
    Measurement Science & Technology, 25 (2014), S. 0150071 - 0150076.

    Zusätzliche Informationen

  219. Autor/innen: Sören Fricke, EADS Innovation Work; Alois Friedberger, EADS Innovation Work; Helmut Seidel, UNI Saarland, LMM; Ulrich Schmid, E366 - MST

    S. Fricke, A. Friedberger, H. Seidel, U. Schmid:
    "Micromachined Pressure Sensor Based on Sapphire for High Temperature Applications";
    Procedia Engineering, 5 (2010), S. 1396 - 1400.

    Zusätzliche Informationen

  220. Autor/innen: Tobias Frischmuth, E366 - MST; Michael Schneider, E366 - MST; Iva Bogdanović Radović, Ruđer Boskovi&#; Zdravko Siketić, Ruđer Boskovi&#; Daniel Maurer, Infineon; Thomas Grille, Infineon; Ulrich Schmid, E366 - MST

    T. Frischmuth, M. Schneider, I. Bogdanović Radović, Z. Siketić, D. Maurer, Th. Grille, U. Schmid:
    "Lowtemperature deposition of a-SiC:H thin films applying a dual plasma source process";
    Thin Solid Films, 616 (2016), S. 164 - 171.

    Zusätzliche Informationen

  221. Autor/innen: Tobias Frischmuth, E366 - MST; Michael Schneider, E366 - MST; Daniel Maurer, Infineon; Thomas Grille, Infineon; Ulrich Schmid, E366 - MST

    T. Frischmuth, M. Schneider, D. Maurer, Th. Grille, U. Schmid:
    "High temperature annealing effects on the chemical and mechanical properties of inductively-coupled plasma-enhanced chemical vapor deposited a-SiC:H thin films";
    Thin Solid Films, 611 (2016), S. 6 - 11.

    Zusätzliche Informationen

  222. Autor/innen: Tobias Frischmuth, E366 - MST; Michael Schneider, E366 - MST; Daniel Maurer, Infineon; Thomas Grille, Infineon; Ulrich Schmid, E366 - MST

    T. Frischmuth, M. Schneider, D. Maurer, Th. Grille, U. Schmid:
    "Inductively-coupled plasma-enhanced chemical vapour deposition ofhydrogenated amorphous silicon carbide thin films for MEMS";
    Sensors and Actuators A: Physical, 247 (2016), S. 647 - 655.

    Zusätzliche Informationen

  223. Autor/in: Paul L. Fulmek, E366 - AEM

    P. Fulmek:
    "Beschreibung ferromagnetischen Materialverhaltens aus einem energetischen Modell";
    Elektrotechnik und Informationstechnik (e&i), 114 (1997), 12; S. 768 - 769.

  224. Autor/innen: Paul L. Fulmek, E366 - AEM; I. Atassi, E366 - AEM; G. Radosavljevic, Uni Novi Sad, Serbia; A. Maric, Uni Novi Sad, Serbia; Johann Nicolics, E366 - AEM; Walter Smetana, E366 - AEM

    P. Fulmek, I. Atassi, G. Radosavljevic, A. Maric, J. Nicolics, W. Smetana:
    "Temperature Dependence of the Quasi-Static Properties of LTCC-Ferrites - First Results";
    Berichte aus der Elektrotechnik: Proceedings E!4570 IPCTECH. New Generation of 3-D Integrated Passive Components & Microsystems in LTCC-Technology, 1 (2011), S. 65 - 71.

  225. Autor/innen: Paul L. Fulmek, E366 - AEM; P. Haumer, E366 - AEM; I. Atassi, E366 - AEM; B. Schweighofer; H. Wegleiter

    P. Fulmek, P. Haumer, I. Atassi, B. Schweighofer, H. Wegleiter:
    "Magnetic DC-Properties of LTCC-Ferrite Material and Their Temperature Dependence";
    IEEE Transactions on Magnetics, 48 (2012), 4; S. 1541 - 1544.

  226. Autor/innen: Paul L. Fulmek, E366 - AEM; P. Haumer, E366 - AEM; H. Wegleiter; B. Schweighofer

    P. Fulmek, P. Haumer, H. Wegleiter, B. Schweighofer:
    "Energetic model of ferromagnetic hysteresis";
    COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 29 (2010), 6; S. 1504 - 1513.

  227. Autor/innen: Paul L. Fulmek, E366 - AEM; Hans Hauser, E366 - AEM

    P. Fulmek, H. Hauser:
    "Magnetization Calculations of (1 1 0) [0 0 1] FeSi-Sheets in Different Directions by Statistical Domain Behaviour";
    Journal of Magnetism and Magnetic Materials, 157 (1996), S. 361 - 362.

  228. Autor/innen: Paul L. Fulmek, E366 - AEM; Hans Hauser, E366 - AEM

    P. Fulmek, H. Hauser:
    "Statistical Hysteresis Model for Anisotropic and Isotropic Magnetic Materials";
    Journal de Physique IV, 8 (1998), S. 335 - 338.

  229. Autor/innen: Paul L. Fulmek, E366 - AEM; Hans Hauser, E366 - AEM; G. Steiner; P. Haumer, E366 - AEM

    P. Fulmek, H. Hauser, G. Steiner, P. Haumer:
    "Magnetic Modelling of Continuously Variable Transformers";
    Physica B: Condensed Matter, 372 (2006), S. 124 - 127.

  230. Autor/innen: Paul L. Fulmek, E366 - AEM; G. Holler; H. Wegleiter; B. Schweighofer; P. Haumer, E366 - AEM

    P. Fulmek, G. Holler, H. Wegleiter, B. Schweighofer, P. Haumer:
    "Method for the Measurement of Transient Magnetic AC Properties of Soft Ferrites";
    IEEE Transactions on Magnetics, 46 (2010), 2; S. 463 - 466.

  231. Autor/innen: Paul L. Fulmek, E366 - AEM; Johann Nicolics, E366 - AEM; S. Schweitzer; C. Sommer, Joanneum-Weiz; Paul Hartmann, Joanneum-Weiz; F. Schrank; F.-P. Wenzl, Joanneum-Weiz

    P. Fulmek, J. Nicolics, S. Schweitzer, C. Sommer, P. Hartmann, F. Schrank, F. Wenzl:
    "The impact of the thermal conductivities of the color conversion elements of phosphor converted LEDs under different current driving schemes";
    Journal of Luminescence, 169 (2015), Part B; S. 559 - 568.

  232. Autor/innen: Paul L. Fulmek, E366 - AEM; C. Sommer, Joanneum-Weiz; Paul Hartmann, Joanneum-Weiz; P. Pachler, Tridonic-Jennersdorf; H. Hoschopf, Tridonic-Jennersdorf; Gregor Langer, AT&S; Johann Nicolics, E366 - AEM; F.-P. Wenzl, Joanneum-Weiz

    P. Fulmek, C. Sommer, P. Hartmann, P. Pachler, H. Hoschopf, G. Langer, J. Nicolics, F. Wenzl:
    "On the Thermal Load of the Color-Conversion Elements in Phosphor-Based White Light-Emitting Diodes";
    Advanced Optical Materials, 1 (2013), 10; S. 753 - 762.

  233. Autor/innen: Paul L. Fulmek, E366 - AEM; C. Sommer, Joanneum-Weiz; Paul Hartmann, Joanneum-Weiz; F.-P. Wenzl, Joanneum-Weiz; P. Pachler, Tridonic-Jennersdorf; H. Hoschopf, Tridonic-Jennersdorf; Gregor Langer, AT&S Klagenfurt; Johann Nicolics, E366 - AEM

    P. Fulmek, C. Sommer, P. Hartmann, F. Wenzl, P. Pachler, H. Hoschopf, G. Langer, J. Nicolics:
    "Color temperature constancy of phosphor converted LED modules: a combined thermal and optical simulation study on the materials requirements";
    E&I Elektrotechnik und Informationstechnik, 129 (2012), S. 1 - 5.

  234. Autor/innen: Paul L. Fulmek, E366 - AEM; H. Wegleiter; P. Haumer, E366 - AEM; B. Schweighofer

    P. Fulmek, H. Wegleiter, P. Haumer, B. Schweighofer:
    "Measurement Of Time-Dependence Of Complex Magnetic Permeability Of Soft-Ferrites";
    Journal of Electrical Engineering, 61 (2010), 7/s; S. 54 - 57.

  235. Autor/innen: Paul L. Fulmek, E366 - MNS; Hans Hauser, E366 - AEM

    P.L. Fulmek, H. Hauser:
    "Magnetization Reversal and Statistical Domain Behaviour";
    Journal of Magnetism and Magnetic Materials, 183 (1998), S. 75 - 77.

  236. Autor/innen: Carsten Gachot; Rodolphe Catrin; Andrés Lasagni; Ulrich Schmid, E366 - MST; Frank Mücklich

    C. Gachot, R. Catrin, A. Lasagni, U. Schmid, F. Mücklich:
    "Comparative study of grain sizes and orientation in microstructured Au, Pt and W thin films designed by laser interference metallurgy";
    Applied Surface Science, 255 (2009), S. 5626 - 5632.

    Zusätzliche Informationen

  237. Autor/in: Martin Gaugitsch, E366 - AEM

    M. Gaugitsch:
    "Dispersiometer mit magneto-optischem Lichtmodulator";
    Elektrotechnik und Informationstechnik (e&i), 114 (1997), 3; S. 145 - 145.

  238. Autor/innen: Martin Gaugitsch, E366 - AEM; Hans Hauser, E366 - AEM

    M. Gaugitsch, H. Hauser:
    "Optimization of a Displacement Sensor with Magneto-Optical Light Modulation";
    Sensors XXXX, 59 (1997), S. 61 - 64.

  239. Autor/innen: Martin Gaugitsch, E366 - AEM; Hans Hauser, E366 - AEM

    M. Gaugitsch, H. Hauser:
    "Optimization of a Magneto-optical Light Modulator, Part 1: Modeling of Birefringence and Faraday Effect";
    Journal of Lightwave Technology, 17 (1999), S. 2633 - 2644.

    Zusätzliche Informationen

  240. Autor/innen: Martin Gaugitsch, E366 - AEM; Hans Hauser, E366 - AEM

    M. Gaugitsch, H. Hauser:
    "Optimization of a Magneto-optical Light Modulator, Part 2: Modeling and Measurement of Faraday and Kerr Effects";
    Journal of Lightwave Technology, 17 (1999), S. 2645 - 2657.

    Zusätzliche Informationen

  241. Autor/innen: Martin Gaugitsch, E366 - AEM; Hans Hauser, E366 - AEM; Friedrich Haberl, E366 - AEM; Johann Hochreiter, E366 - AEM

    M. Gaugitsch, H. Hauser, F. Haberl, J. Hochreiter:
    "Magneto-optic Light Modulation for Refraction Measurements by Thin Iron Films";
    Journal of Magnetism and Magnetic Materials, 158 (1996), S. 438 - 439.

  242. Autor/innen: Maciej Gazicki, E366 - MNS; Hierek Szimanowski; Jacek Tyczkowski; Johannes Schalko, E366 - MNS; Fethi Olcaytug, E366 - MNS

    M. Gazicki, H. Szimanowski, J. Tyczkowski, J. Schalko, F. Olcaytug:
    "Correlation between gas phase composition of RF plasma of argon diluted tetraethylgermanium and chemical structure of ..";
    Journal of Vacuum Science & Technology A, A14 (1996), (5); S. 2835 - 2841.

    Zusätzliche Informationen

  243. Autor/innen: K. Ghaderi; Gerhard Hobler, E362; Matthias Budil, E366; L. Mader; H.J. Schulze

    K. Ghaderi, G. Hobler, M. Budil, L. Mader, H.J. Schulze:
    "Determination of silicon point defect parameters and reaction barrier energies from gold diffusion experiments";
    Journal of Applied Physics, 77(3) (1995), S. 1320 - 1322.

  244. Autor/innen: Manuel Gillinger, E366 - MST; Michael Schneider, E366 - MST; Achim Bittner, E366 - MST; P. Nicolay, CTR; Ulrich Schmid, E366 - MST

    M. Gillinger, M. Schneider, A. Bittner, P. Nicolay, U. Schmid:
    "Impact of annealing temperature on the mechanical and electrical properties of sputtered aluminum nitride thin films";
    Journal of Applied Physics, 117 (2015).

    Zusätzliche Informationen

  245. Autor/innen: Manuel Gillinger, E366 - MST; Kirill Shaposhnikov, E325; Tobias Knobloch; Manfred Kaltenbacher, E325 - 4; Ulrich Schmid, E366 - MST; Michael Schneider, E366 - MST

    M. Gillinger, K. Shaposhnikov, T. Knobloch, M. Kaltenbacher, U. Schmid, M. Schneider:
    "Impact of layer and substrate properties on the surface acoustic wave velocity in scandium doped aluminum nitride based SAW devices on sapphire";
    AIP Advances, 23 (2016), 108; 5 S.

  246. Autor/innen: Manuel Gillinger, E366 - MST; Kirill Shaposhnikov, E325; Theresia Knobloch, E366 - MST; Michael Schneider, E366 - MST; Manfred Kaltenbacher, E325 - 4; Ulrich Schmid, E366 - MST

    M. Gillinger, K. Shaposhnikov, T. Knobloch, M. Schneider, M. Kaltenbacher, U. Schmid:
    "Impact of layer and substrate properties on the surface acoustic wave velocity in scandium doped aluminum nitride based SAW devices on sapphire";
    Applied Physics Letters, 108 (2016), S. 231601-1 - 231601-4.

    Zusätzliche Informationen

  247. Autor/innen: Ioanna Giouroudi, E366 - MNS; Chinthaka Gooneratne, KAUST, Saudi Arabia; G. Kokkinis

    I. Giouroudi, C. Gooneratne, G. Kokkinis:
    "Controlled trapping and detection of magnetic particles by a magnetic microactuator and a giant magnetoresistance (GMR) sensor";
    Key Engineering Materials, 605 (2014), S. 352 - 355.

  248. Autor/innen: Ioanna Giouroudi, E366 - MST; Hans Hauser, E366 - AEM; G. Daalmans; G. Rieger; J. Wecker

    I. Giouroudi, H. Hauser, G. Daalmans, G. Rieger, J. Wecker:
    "Characterization of Magneto-Impedance Thin Film Microstructures";
    Journal of Electrical Engineering, 55 (2004), 10/S; S. 11 - 15.

  249. Autor/innen: Ioanna Giouroudi, E366 - MST; Hans Hauser, E366 - AEM; Laszlo Musiejovsky, E366 - AEM; Johannes Steurer, E366

    I. Giouroudi, H. Hauser, L. Musiejovsky, J. Steurer:
    "Characterization of Amorphous GMI Thin-Film Meander Trilayers";
    IEEE Sensors Journal, 6 (2006), 4; S. 970 - 973.

  250. Autor/innen: Ioanna Giouroudi, E366 - MST; Hans Hauser, E366 - AEM; Laszlo Musiejovsky, E366 - AEM; Johannes Steurer, E366

    I. Giouroudi, H. Hauser, L. Musiejovsky, J. Steurer:
    "Giant magnetoimpedance sensor integrated in an oscillator system";
    Journal of Applied Physics, 99 (2006), S. 08D906-1 - 08D906-3.

  251. Autor/innen: Ioanna Giouroudi, E366 - MST; Hans Hauser, E366 - AEM; Laszlo Musiejovsky, E366 - AEM; Johannes Steurer, E366; Yuri S. Didosyan, E366 - AEM

    I. Giouroudi, H. Hauser, L. Musiejovsky, J. Steurer, Y. Didosyan:
    "Investigation of magnetoimpedance effect in amorphous thin-film microstructures";
    Journal of Applied Physics, 97 (2005), 10M109; S. 1 - 3.

  252. Autor/innen: Ioanna Giouroudi, E366 - MST; Harald Hötzendorfer; Jürgen Kosel, E354; Daniela Andrijasevic, E366 - MST; Werner Brenner, E366 - MST

    I. Giouroudi, H Hötzendorfer, J. Kosel, D. Andrijasevic, W. Brenner:
    "Development of a microgripping system for handling of microcomponents";
    Precision Engineering, PRE-5574 (2007), 5 S.

    Zusätzliche Informationen

  253. Autor/innen: Ioanna Giouroudi, E366 - MNS; Franz Keplinger, E366 - MNS

    I. Giouroudi, F. Keplinger:
    "Microfluidic Biosensing Systems Using Magnetic Nanoparticles";
    International Journal of Molecular Sciences, 14 (2013), S. 18535 - 18556.

  254. Autor/innen: Ioanna Giouroudi, E366 - MNS; G. Kokkinis; K. Fodil, Normandie Uni France; M. Denoual, Normandie Uni France; C. Dolabdjian, Normandie Uni France; S. Madtha; E. Torabi-Makhsos; Franz Keplinger, E366 - MNS

    I. Giouroudi, G. Kokkinis, K. Fodil, M. Denoual, C. Dolabdjian, S. Madtha, E. Torabi-Makhsos, F. Keplinger:
    "On-Chip Separation and Detection of Magnetically Labeled Pathogens";
    J Nanomed Nanotechnol, 5 (2014), 5; S. 225.

  255. Autor/innen: Ioanna Giouroudi, E366 - MNS; Jürgen Kosel, KAUST, Saudi Arabia

    I. Giouroudi, J. Kosel:
    "Recent Progress in Biomedical Applications of Magnetic Nanoparticles";
    Recent Patents on Nanotechnology, 4 (2010), S. 111 - 118.

  256. Autor/innen: Ioanna Giouroudi; Jürgen Kosel, E354; Helmut Pfützner, E354; Werner Brenner, E366 - MST

    I. Giouroudi, J. Kosel, H. Pfützner, W. Brenner:
    "Magnetostrictive bilayer sensor system for testing of rotating microdevices";
    Sensors XXXX (eingeladen), 142 (2008), S. 474 - 478.

  257. Autor/innen: Ioanna Giouroudi, E366 - MNS; Sander Van den Driesche, E366 - MNS; Jürgen Kosel, KAUST, Saudi Arabia

    I. Giouroudi, S. Van den Driesche, J. Kosel:
    "Biosensing Utilizing the Motion of Magnetic Microparticles in a Microfluidic System";
    Procedia Engineering, 5 (2010), 5; S. 824 - 827.

  258. Autor/innen: Ioanna Giouroudi, E366 - MNS; Sander Van den Driesche, E366 - MNS; Jürgen Kosel, KAUST, Saudi Arabia; Roland Grössinger, E138; Michael J. Vellekoop, E366 - MNS

    I. Giouroudi, S. Van den Driesche, J. Kosel, R. Grössinger, M. Vellekoop:
    "On-chip bio-analyte detection utilizing the velocity of magnetic microparticles in a fluid";
    Japanese Journal of Applied Physics (eingeladen), 109 (2011), S. 07B304-1 - 07B304-3.

  259. Autor/innen: A. Glaninger, E366 - MNS; Artur Jachimowicz; Franz Kohl, E366 - MNS; Rupert Chabicovsky, E366 - MNS; Gerald Urban

    A. Glaninger, A. Jachimowicz, F. Kohl, R. Chabicovsky, G. Urban:
    "Wide Range Semiconductor Flow Sensors";
    Sensors XXXX, 85 (2000), S. 139 - 146.

  260. Autor/innen: Thomas Glatzl, Donau Uni Krems; Samir Cerimovic, E366 - MNS; Harald Steiner, Donau-Uni Krems; Almir Talic, Donau-Uni Krems; Roman Beigelbeck, Donau Uni Krems; Artur Jachimowicz, E366 - MNS; Thilo Sauter, E384; Franz Keplinger, E366 - MNS

    T. Glatzl, S. Cerimovic, H. Steiner, A. Talic, R. Beigelbeck, A. Jachimowicz, T. Sauter, F. Keplinger:
    "Hot-film and calorimetric thermal air flow sensors realized with printed board technology";
    Journal of Sensors and Sensor Systems, 5 (2016), S. 283 - 291.

  261. Autor/innen: Thomas Glatzl, Donau Uni Krems; Harald Steiner, Donau-Uni Krems; Franz Kohl, Donau-Uni Krems; Thilo Sauter, E384; Franz Keplinger, E366 - MNS

    T. Glatzl, H. Steiner, F. Kohl, T. Sauter, F. Keplinger:
    "Development of an air flow sensor for heating, ventilating, and airconditioning systems based on printed circuit board technology";
    Sensors and Actuators A: Physical, 237 (2016), S. 1 - 8.

  262. Autor/in: Alois Goiser, E366 - MNS

    A. Goiser:
    "Enhancing the Signal-to-Interference Ratio in Digital Direct-Sequence Spread-Spectrum Receivers";
    International Journal of Wireless Information Networks, 4 (1997), 8; S. 173 - 186.

  263. Autor/innen: Chinthaka Gooneratne, KAUST, Saudi Arabia; Ioanna Giouroudi, E366 - MNS; Jürgen Kosel, KAUST, Saudi Arabia

    C. Gooneratne, I. Giouroudi, J. Kosel:
    "A Planar Conducting Micro-Loop Structure for Transportation of Magnetic Beads: An Approach towards Rapid Sensing and Quantification of Biological Entities";
    Sensor Letters, 10 (2012), S. 769 - 773.

  264. Autor/innen: Chinthaka Gooneratne, KAUST, Saudi Arabia; Ioanna Giouroudi, E366 - MNS; Cai Lian, KAUST, Saudi Arabia; Jürgen Kosel, KAUST, Saudi Arabia

    C. Gooneratne, I. Giouroudi, C. Lian, J. Kosel:
    "A giant magnetoresistance ring-sensor based microsystem for magnetic bead manipulation and detection";
    Japanese Journal of Applied Physics (eingeladen), 109 (2011), S. 07E517-1 - 07E517-3.

  265. Autor/innen: Chinthaka Gooneratne, KAUST, Saudi Arabia; Cai Liang; Ioanna Giouroudi, E366 - MNS; Jürgen Kosel, KAUST, Saudi Arabia

    C. Gooneratne, C. Liang, I. Giouroudi, J. Kosel:
    "A magnetic particle micro-trap for large trapping surfaces";
    Procedia Engineering, 25 (2011), S. 1201 - 1204.

  266. Autor/innen: Chinthaka Gooneratne, KAUST, Saudi Arabia; Cai Liang; Ioanna Giouroudi, E366 - MNS; Jürgen Kosel, E354

    C. Gooneratne, C. Liang, I. Giouroudi, J. Kosel:
    "An integrated micro-chip for rapid detection of magnetic particles";
    Journal of Applied Physics, 111 (2012), 07B327; S. 07B327-1 - 07B327-3.

  267. Autor/innen: Chinthaka Gooneratne, KAUST, Saudi Arabia; Omar Yassine; Ioanna Giouroudi, E366 - MNS; Jürgen Kosel, KAUST, Saudi Arabia

    C. Gooneratne, O. Yassine, I. Giouroudi, J. Kosel:
    "Selective Manipulation of Superparamagnetic Beads by a Magnetic Microchip";
    IEEE Transactions on Magnetics, 49 (2013), 7; S. 3418 - 3421.

  268. Autor/innen: P. Grabiec; R. Sunyk; F. Shi; Gordana Popovic, E366 - MST; T. Gotszalk; Peter Hudek; P. Dumania; I.W. Rangelow

    P. Grabiec, R. Sunyk, F. Shi, G. Popovic, T. Gotszalk, P. Hudek, P. Dumania, I. Rangelow:
    "A Design and Fabrication of a 3D Force Sensitive Microprobe for Surface Characterization";
    Microelectronic Engineering, 46 (1999), S. 405 - 408.

  269. Autor/innen: Roland Grössinger, E138; Hans Hauser, E366 - AEM; Mikael Dahlgren; Josef Fidler, E138

    R. Grössinger, H. Hauser, M. Dahlgren, J. Fidler:
    "Hysteresis of Nanocrystalline R-Fe-B";
    Physica B: Condensed Matter, 275 (2000), S. 248 - 252.

  270. Autor/innen: Roland Grössinger, E138; Hans Hauser, E366 - AEM; Laurentiu Stoleriu, E366 - AEM; Petru Andrei, E366 - AEM

    R. Grössinger, H. Hauser, L. Stoleriu, P. Andrei:
    "Hysteresis Modeling of Anisotropic Barium-Ferrite";
    IEEE Transactions on Magnetics, 36 (2000), 5; S. 3357 - 3359.

  271. Autor/innen: Roland Grössinger, E138; Franz Keplinger, E366 - MNS; C. Hauser, E134

    R. Grössinger, F. Keplinger, C. Hauser:
    "The design and construction of a thin foil high field magnet";
    Physica B: Condensed Matter, 346 - 347 (2004), S. 604 - 608.

    Zusätzliche Informationen

  272. Autor/innen: M. Grosser, Saarland University; M. Münch, Saarland University; Josef Brenner, ACēT; M. Wilke, CoAutor - E366-MST; Helmut Seidel, UNI Saarland, LMM; C. Bienert, University Erlangen; A. Roosen, University Erlangen; Ulrich Schmid, E366 - MST

    M. Grosser, M. Münch, J. Brenner, M. Wilke, H. Seidel, C. Bienert, A. Roosen, U. Schmid:
    "Study on microstructural, chemical and electrical properties of tantalum nitride thin films deposited by reactive direct current magnetron sputtering";
    Microsystem Technologies - Micro- and Nanosystems - Information Storage and Processing Systems, 16 (2010), 5; S. 825 - 836.

    Zusätzliche Informationen

  273. Autor/innen: M. Grosser, Saarland University; M. Münch, Saarland University; Helmut Seidel, UNI Saarland, LMM; C. Bienert, University Erlangen; Ulrich Schmid, E366 - MST

    M. Grosser, M. Münch, H. Seidel, C. Bienert, U. Schmid:
    "The impact of substrate properties and thermal annealing on tantalum nitride thin films";
    Applied Surface Science, 258 (2012), S. 2894 - 2900.

    Zusätzliche Informationen

  274. Autor/innen: M. Grosser, Saarland University; Ulrich Schmid, E366 - MST

    M. Grosser, U. Schmid:
    "The impact of annealing temperature and time on the electrical performance of Ti/Pt thin films";
    Applied Surface Science, 256 (2010), 14; S. 4564 - 4569.

    Zusätzliche Informationen

  275. Autor/innen: M. Grosser, Saarland University; Ulrich Schmid, E366 - MST

    M. Grosser, U. Schmid:
    "The impact of sputter conditions on the microstructure and on the resistivity of tantalum thin films";
    Thin Solid Films, 517 (2009), S. 4493 - 4496.

    Zusätzliche Informationen

  276. Autor/innen: Walter Gschohsmann, E366 - AEM; Johann Nicolics, E366 - AEM; Ephraim Suhir, Univ. California

    W. Gschohsmann, J. Nicolics, E. Suhir:
    "Deformations in stretched surface mounted ceramic strips for sensor applications";
    Microelectronics International, 28 (2011), 3; S. 19 - 23.

  277. Autor/innen: Walter Gschohsmann, E366 - AEM; Johann Nicolics, E366 - AEM; Ephraim Suhir, Univ. California

    W. Gschohsmann, J. Nicolics, E. Suhir:
    "Elastizitätsmodell eines keramischen Sensorstreifens bei longitudinaler Verformung";
    E&I Elektrotechnik und Informationstechnik, 127 (2010), 10; S. 279 - 284.

  278. Autor/innen: Walter Gschohsmann, E366 - AEM; Robert Scheiber

    W. Gschohsmann, R. Scheiber:
    "A Multilayer Model of Loaded Solder Joints";
    International Review on Modelling and Simulations (IREMOS), 3 (2010), 5; S. 983 - 987.

  279. Autor/innen: T. Haas, MSE GmbH; C. Zeilmann, MSE GmbH; Achim Bittner; Ulrich Schmid, E366 - MST

    T. Haas, C. Zeilmann, A. Bittner, U. Schmid:
    "Investigation on Micromachining Technologies for the Realization of LTCC Devices and Systems";
    Proceedings of SPIE, 8066 (2011), S. 1 - 6.

    Zusätzliche Informationen

  280. Autor/innen: Friedrich Haberl, E366 - AEM; Johann Hochreiter, E366 - AEM; Martin Gaugitsch, E366 - AEM; Hans Hauser, E366 - AEM

    F. Haberl, J. Hochreiter, M. Gaugitsch, H. Hauser:
    "Investigations of a Position Resolving Light Modulator for Refraction Studies";
    International Journal of Applied Electromagnetics and Mechanics, 7 (1996), S. 11 - 20.

  281. Autor/innen: Christoph Haiden, E366 - MNS; Thomas Wopelka, ACēT; Martin Jech, ACēT; Franz Keplinger, E366 - MNS; Michael J. Vellekoop, Universität Bremen

    C. Haiden, T. Wopelka, M. Jech, F. Keplinger, M.J. Vellekoop:
    "A Microfluidic Chip and Dark-Field Imaging System for Size Measurement of Metal Wear Particles in Oil";
    IEEE Sensors Journal, 16 (2016), 5; 8 S.

    Zusätzliche Informationen

  282. Autor/innen: Christoph Haiden, E366 - MNS; Thomas Wopelka, ACēT; Martin Jech, ACēT; Franz Keplinger, E366 - MNS; Michael J. Vellekoop, Universität Bremen

    C. Haiden, T. Wopelka, M. Jech, F. Keplinger, M.J. Vellekoop:
    "Concurrent particle diffusion and sedimentation measurements using two-dimensional tracking in a vertical sample arrangement";
    Applied Physics Letters, 108 (2016), S. 094101-1 - 094101-4.

    Zusätzliche Informationen

  283. Autor/innen: Christoph Haiden, E366 - MNS; Thomas Wopelka, ACēT; Martin Jech, ACēT; Franz Keplinger, E366 - MNS; Michael J. Vellekoop, Universität Bremen

    C. Haiden, T. Wopelka, M. Jech, F. Keplinger, M.J. Vellekoop:
    "Sizing of metallic nanoparticles confined to a microfluidic film applying dark field particle tracking";
    Langmuir, 30 (2014), 31; S. 9607 - 9615.

    Zusätzliche Informationen

  284. Autor/innen: Christoph Haiden, E366 - MNS; Thomas Wopelka, ACēT; Martin Jech, ACēT; Emanuel Weber, E366 - MNS; Dietmar Puchberger-Enengl, E366; Franz Keplinger, E366 - MNS; Michael J. Vellekoop, Universität Bremen

    C. Haiden, T. Wopelka, M. Jech, E. Weber, D. Puchberger-Enengl, F. Keplinger, M.J. Vellekoop:
    "A microfluidic system for visualisation of individual sub-micron particles by light scattering";
    Procedia Engineering, 47 (2012), S. 680 - 683.

    Zusätzliche Informationen

  285. Autor/innen: Gabriel Hairer, E366 - MNS; Günter Pärr, E366 - MNS; Peter Svasek, E366 - MNS; Artur Jachimowicz, E366 - MNS; Michael J. Vellekoop, E366 - MNS

    G. Hairer, G. Pärr, P. Svasek, A. Jachimowicz, M. Vellekoop:
    "Investigations of micrometer sample stream profiles in a three-demensional hydrodynamic focusing device";
    Sensors and Actuators B: Chemical, 132 (2008), S. 518 - 524.

  286. Autor/innen: Gabriel Hairer, E366 - MNS; Michael J. Vellekoop, E366 - MNS

    G. Hairer, M. Vellekoop:
    "An integrated flow-cell for full sample stream control";
    Microfluidics and Nanofluidics, 7 (2009), S. 647 - 658.

  287. Autor/innen: Anna-Elisabeth-Maria Haller, E366 - MNS; Wolfgang Herbert Buchegger, E366 - MNS; Michael J. Vellekoop, E366 - MNS

    A.E.M. Haller, W.H. Buchegger, M. Vellekoop:
    "Towards an optimized blood plasma separation chip: Finite element analysis of a novel corner structure in a backward-facing step";
    Procedia Engineering, 25 (2011), S. 439 - 442.

  288. Autor/innen: Anna-Elisabeth-Maria Haller, E366 - MNS; Andreas Spittler; Lukas Brandhoff; H. Zirath; Dietmar Puchberger-Enengl, E366; Franz Keplinger, E366 - MNS; Michael J. Vellekoop, Universität Bremen

    A.E.M. Haller, A. Spittler, L. Brandhoff, H. Zirath, D. Puchberger-Enengl, F. Keplinger, M.J. Vellekoop:
    "Microfluidic Vortex Enhancement for on-Chip Sample Preparation";
    Micromachines, 6 (2015), 2; 13 S.

    Zusätzliche Informationen

  289. Autor/innen: Anna-Elisabeth-Maria Haller, E366 - MNS; Sabine Zauner, E164; Mohammad Amin Managhebaty, E366 - MNS; Dietmar Puchberger-Enengl, E366; Nadja Haiden, MUW; Alexandra Kreissl, MUW; Anne Kasper-Giebl, E164 - UPA; Franz Keplinger, E366 - MNS; Michael J. Vellekoop, Universität Bremen

    A.E.M. Haller, S. Zauner, M. Managhebaty, D. Puchberger-Enengl, N. Haiden, A. Kreissl, A. Kasper-Giebl, F. Keplinger, M.J. Vellekoop:
    "Measuring Calcium Content of Human Milk on a Microfluidic Chip";
    Procedia Engineering, 168 (2016), S. 105 - 108.

    Zusätzliche Informationen

  290. Autor/innen: Ch. Halper; Michael Heiss, E366 - MNS; Georg Brasseur, E366 - MNS

    Ch. Halper, M. Heiss, G. Brasseur:
    "Digital-to-analog conversion by pulse-count modulation";
    IEEE Transactions on Instrumentation and Measurement Technology, 45 (1996), 4; S. 805 - 814.

  291. Autor/innen: Gernot Hanreich; Markus Mayer, E354; Martin Mündlein; Johann Nicolics, E366 - AEM

    G. Hanreich, M. Mayer, M. Mündlein, J. Nicolics:
    "Thermal investigation of GaAs microwave power transistors";
    Journal of Microelectronics and Electronic Packaging, vol. 1 (2004), S. 1 - 8.

  292. Autor/innen: Gernot Hanreich, E366 - AEM; Martin Mündlein, E366 - AEM; Hans Hauser, E366 - AEM; Johann Nicolics, E366 - AEM; Günther Stangl, E366 - MNS; Roland Grössinger, E138; J.H. Espina-Hernandez

    G. Hanreich, M. Mündlein, H. Hauser, J. Nicolics, G. Stangl, R. Grössinger, J. Espina-Hernandez:
    "Ultra-thin pick-up coil for surface flux detection";
    Sensors XXXX, 91 (2001), S. 57 - 60.

  293. Autor/innen: Gernot Hanreich, E366 - AEM; Johann Nicolics, E366 - AEM; Hans Hauser, E366 - AEM

    G. Hanreich, J. Nicolics, H. Hauser:
    "Silizium-Substrate mit Mikro-Whisker-Strukturierung für verbesserte Wärmeabfuhr in der Leistungselektronik";
    VTE Aufbau- und Verbindungstechnik in der Elektronik, 12 (2000), S. 138 - 143.

  294. Autor/innen: Gernot Hanreich, E366 - AEM; Johann Nicolics, E366 - AEM; Hans Hauser, E366 - AEM

    G. Hanreich, J. Nicolics, H. Hauser:
    "Silicon-Microwhisker-Heat-Spreader for Enhanced Heat Transfer in Power Electronics";
    Packaging and Interconnection Technology in Electronics, 12 (2000), S. E45 - E48.

  295. Autor/innen: Gernot Hanreich, E366 - AEM; Johann Nicolics, E366 - AEM; Martin Mündlein; Hans Hauser, E366 - AEM; Rupert Chabicovsky, E366 - MNS

    G. Hanreich, J. Nicolics, M. Mündlein, H. Hauser, R. Chabicovsky:
    "A new bonding technique for human skin humidity sensors";
    Sensors XXXX, 92 (2001), S. 364 - 369.

  296. Autor/innen: Gernot Hanreich, E366 - AEM; Johann Nicolics, E366 - AEM; Laszlo Musiejovsky, E366 - AEM

    G. Hanreich, J. Nicolics, L. Musiejovsky:
    "High Resolution Thermal Simulation of Electronic Components";
    Microelectronics Reliability, 40 (2000), S. 2069 - 2076.

  297. Autor/innen: Gernot Hanreich, E366 - AEM; Johann Nicolics, E366 - AEM; Laszlo Musiejovsky, E366 - AEM

    G. Hanreich, J. Nicolics, L. Musiejovsky:
    "Plastic-encapsulated components for cars";
    IEEE Instrumentation & Measurement Magazine, 4 (2001), 2; S. 16 - 21.

  298. Autor/innen: Gernot Hanreich, E366 - AEM; Johann Nicolics, E366 - AEM; Günther Stangl, E366 - MNS

    G. Hanreich, J. Nicolics, G. Stangl:
    "Investigation of the thermal performance of micro-whisker structured silicon heat spreaders for power devices";
    Microelectronics Journal, 31 (2000), 11-12; S. 969 - 973.

  299. Autor/innen: W. Hansal, Happy Plating, Wr.N.; Harald Steiner, E366 - MNS; R. Mann, Happy Plating, Wr.N.; M. Halmdienst, Happy Plating, Wr.N.; Johannes Schalko, E366 - MNS; Franz Keplinger, E366 - MNS

    W. Hansal, H. Steiner, R. Mann, M. Halmdienst, J. Schalko, F. Keplinger:
    "Microgalvanic nickel pulse plating process for the production of thermal actuators";
    Microsystem Technologies - Micro- and Nanosystems - Information Storage and Processing Systems, 12 (2013), 9 S.

  300. Autor/in: P. Haumer, E366 - AEM

    P. Haumer:
    "Relation between physical and phenomenological aspects in the framework of an energetic hysteresis model";
    Journal of Applied Physics, 97 (2005), 10E517; S. 1 - 3.

  301. Autor/innen: P. Haumer, E366 - AEM; Paul L. Fulmek, E366 - AEM

    P. Haumer, P. Fulmek:
    "Estimation of the effects of microscopic misalignments on the magnetization process in thin films by energetic modeling";
    IEEE Transactions on Magnetics, 46 (2010), 2; S. 247 - 250.

  302. Autor/innen: P. Haumer, E366 - AEM; Hans Hauser, E366 - AEM; Paul L. Fulmek, E366 - AEM; D. Bajalan

    P. Haumer, H. Hauser, P. Fulmek, D. Bajalan:
    "Hysteresis Modeling of Thin Permalloy Films and Parameter Interpretation";
    IEEE Transactions on Magnetics, 40 (2004), 4; S. 2745 - 2747.

    Zusätzliche Informationen

  303. Autor/in: Hans Hauser, E366 - AEM

    H. Hauser:
    "Energetic model of ferromagnetic hysteresis: Isotropic Magnetization";
    Journal of Applied Physics, 96 (2004), 5; S. 2753 - 2767.

  304. Autor/in: Hans Hauser, E366 - AEM

    H. Hauser:
    "Erratum: " Energetic model of ferromagnetic hysteresis: Isotropic magnetization" [J. Appl. Phys. 96, 2753 (2004)]";
    Journal of Applied Physics, 97 (2005), 099901; S. 1.

  305. Autor/in: Hans Hauser, E366 - AEM

    H. Hauser:
    "Magnetic hysteresis modeling of electronic sensor devices and components";
    Sensors XXXX, 106 (2003), S. 84 - 90.

  306. Autor/innen: Hans Hauser, E366 - AEM; B. Augustyniak; M. Radczuk

    H. Hauser, B. Augustyniak, M. Radczuk:
    "Barkhausen Noise Calculation by Hysteresis Model Parameters";
    IEEE Transactions on Magnetics, 78 (2002), 5; S. 2388 - 2390.

  307. Autor/innen: Hans Hauser, E366 - AEM; Diyar Bajalan, E366 - AEM; Paul L. Fulmek, E366 - AEM

    H. Hauser, D. Bajalan, P. Fulmek:
    "Modeling of the directional dependence of the hysteresis in nanostructured thin films by ion irradiation";
    Physica B: Condensed Matter, 372 (2006), S. 33 - 36.

  308. Autor/innen: Hans Hauser, E366 - AEM; Martin Evanzin, E366 - AEM

    H. Hauser, M. Evanzin:
    "Magnetic hysteresis calculation of sensors based on orthoferrites";
    Sensors XXXX, 129 (2006), S. 231 - 234.

  309. Autor/innen: Hans Hauser, E366 - AEM; Helmut Frais-Kölbl, E366 - AEM; Manuela Franz, E366 - AEM

    H. Hauser, H. Frais-Kölbl, M. Franz:
    "Measurement of Hard Magnetic Properties During Pulse Magnetization";
    Journal of Electrical Engineering, 50 (1999), S. 3 - 6.

  310. Autor/innen: Hans Hauser, E366 - AEM; Paul L. Fulmek, E366 - AEM

    H. Hauser, P. Fulmek:
    "Hysteresis Calculations by Statistic Behaviour of Particles of High Density";
    Journal of Magnetism and Magnetic Materials, 155 (1996), S. 34 - 36.

  311. Autor/innen: Hans Hauser, E366 - AEM; Paul L. Fulmek, E366 - AEM

    H. Hauser, P. Fulmek:
    "Magnetization process modeling of anisotropic magnetoresistive permalloy films";
    Journal of Magnetism and Magnetic Materials, 254-255 (2003), S. 293 - 295.

  312. Autor/innen: Hans Hauser, E366 - AEM; Paul L. Fulmek, E366 - AEM

    H. Hauser, P. Fulmek:
    "Magnetization Reversal in an Energetic Hysteresis Model";
    Journal of Magnetism and Magnetic Materials, 160 (1996), S. 35 - 37.

  313. Autor/innen: Hans Hauser, E366 - AEM; Paul L. Fulmek, E366 - AEM; Roland Grössinger, E138

    H. Hauser, P. Fulmek, R. Grössinger:
    "Hysteresis modeling and measurement for two-dimensional particle assemblies";
    Journal of Magnetism and Magnetic Materials, 242 - 245 (2002), S. 1067 - 1069.

    Zusätzliche Informationen

  314. Autor/innen: Hans Hauser, E366 - AEM; Paul L. Fulmek, E366 - AEM; P. Haumer, E366 - AEM; M. Vopálenský; P. Ripka

    H. Hauser, P. Fulmek, P. Haumer, M. Vopálenský, P. Ripka:
    "Flipping field and stability in anisotropic magnetoresistive sensors";
    Sensors XXXX, 106 (2003), S. 121 - 125.

  315. Autor/innen: Hans Hauser, E366 - AEM; Ioanna Giouroudi, E366 - MST; Johannes Steurer, E366; Laszlo Musiejovsky, E366 - AEM; Johann Nicolics, E366 - AEM

    H. Hauser, I. Giouroudi, J. Steurer, L. Musiejovsky, J. Nicolics:
    "Magnetic Hysteresis Modeling of Thin Film Giant Magnetoimpedance Sensors";
    Sensor Letters, 5 (2007), 1; S. 133 - 137.

  316. Autor/innen: Hans Hauser, E366 - AEM; Roland Grössinger, E138

    H. Hauser, R. Grössinger:
    "Directional Dependence and Minor Loops of Magnetization of Ba- and Sr-Ferrites";
    IEEE Transactions on Magnetics, 39 (2003), 5; S. 2887 - 2889.

  317. Autor/innen: Hans Hauser, E366 - AEM; Roland Grössinger, E138

    H. Hauser, R. Grössinger:
    "Hysteresis model for isotropic magnetization process - application and physical interpretation";
    Journal of Magnetism and Magnetic Materials, 226-230 (2001), S. 1254 - 1256.

  318. Autor/innen: Hans Hauser, E366 - AEM; Roland Grössinger, E138

    H. Hauser, R. Grössinger:
    "Isotropic Hysteresis Modeling of Fe-Co-B Alloys";
    Journal of Applied Physics, 85 (1999), S. 5133 - 5135.

  319. Autor/innen: Hans Hauser, E366 - AEM; Roland Grössinger, E138; Franz Keplinger, E366 - MNS; Markus Schönhart, E138

    H. Hauser, R. Grössinger, F. Keplinger, M. Schönhart:
    "Effect of structural changes on hysteresis properties of steel";
    Journal of Magnetism and Magnetic Materials, 320 (2008), S. e983 - e987.

    Zusätzliche Informationen

  320. Autor/innen: Hans Hauser, E366 - AEM; Roland Grössinger, E138; Michaela Küpferling, E138

    H. Hauser, R. Grössinger, M. Küpferling:
    "Microstructure and Hysteresis Model Parameters of Hard Magnetic Ferrites";
    IEEE Transactions on Magnetics, 40 (2004), 4; S. 2949 - 2951.

  321. Autor/innen: Hans Hauser, E366 - AEM; Felix Himmelstoß, E370 - 2; Peter Hans Wurm, E370 - 2

    H. Hauser, F. Himmelstoß, P. Wurm:
    "Flux measurements and modeling of the magnetic hysteresis for a zero-voltage switching dc-to-dc converter";
    Journal of Applied Physics, 93 (2003), 10; S. 8790 - 8792.

  322. Autor/innen: Hans Hauser, E366 - AEM; Felix Himmelstoß, E370 - 2; Peter Hans Wurm, E370 - 2

    H. Hauser, F. Himmelstoß, P. Wurm:
    "Magnetic loss measurement and calculation of a DC/DC converter";
    International Journal of Applied Electromagnetics and Mechanics, 13 (2002), S. 411 - 419.

  323. Autor/innen: Hans Hauser, E366 - AEM; Johann Hochreiter, E366 - AEM; Günther Stangl, E366 - MNS; Rupert Chabicovsky, E366 - MNS; Michael Janiba, E366 - MNS; Karl Riedling, E366

    H. Hauser, J. Hochreiter, G. Stangl, R. Chabicovsky, M. Janiba, K. Riedling:
    "Anisotropic Magnetoresistance Effect Field Sensors";
    Journal of Magnetism and Magnetic Materials, 216 (2000), S. 788 - 791.

  324. Autor/innen: Hans Hauser, E366 - AEM; D.C. Jiles; Y. Melikhov; L. Li; Roland Grössinger, E138

    H. Hauser, D. Jiles, Y. Melikhov, L. Li, R. Grössinger:
    "An approach to modeling the dependence of magnetization on magnetic field in the high field regime";
    Journal of Magnetism and Magnetic Materials, 300 (2006), S. 273 - 283.

    Zusätzliche Informationen

  325. Autor/innen: Hans Hauser, E366 - AEM; Reinhard Kloibhofer, E366 - AEM; Günther Stangl, E366 - MNS; Wolfgang Fallmann, E366 - MNS; Peter Aigner, E366 - MNS; Johann Hochreiter, E366 - AEM

    H. Hauser, R. Kloibhofer, G. Stangl, W. Fallmann, P. Aigner, J. Hochreiter:
    "Magnetoresistive Sensoren";
    Elektrotechnik und Informationstechnik (e&i), 115 (1998), S. 382 - 390.

  326. Autor/innen: Hans Hauser, E366 - AEM; Ludek Kraus; P. Ripka

    H. Hauser, L. Kraus, P. Ripka:
    "Giant Magnetoimpedance Sensors";
    IEEE Instrumentation & Measurement Magazine (eingeladen), 4 (2001), 2; S. 28 - 32.

  327. Autor/innen: Hans Hauser, E366 - AEM; Johann Nicolics, E366 - AEM; Reinhard Steindl, E366 - MNS; Christian Hausleitner, E366 - MNS; Alfred Pohl, E366 - MNS

    H. Hauser, J. Nicolics, R. Steindl, C. Hausleitner, A. Pohl:
    "Miniaturized Magnetic Field Sensors Utilizing Giant Magneto-Impedance [GMI] Effect and surface Acoustic Wave [SAW] Technology";
    Sensors and Materials (eingeladen), 13 (2001), 1; S. 25 - 40.

  328. Autor/innen: Hans Hauser, E366 - AEM; M. Rührig; J. Wecker

    H. Hauser, M. Rührig, J. Wecker:
    "Hysteresis modeling of tunneling magnetoresistance strain sensor elements";
    Journal of Applied Physics, 95 (2004), 11; S. 7258 - 7260.

  329. Autor/innen: Hans Hauser, E366 - AEM; Günther Stangl, E366 - MNS; Johann Hochreiter, E366 - AEM

    H. Hauser, G. Stangl, J. Hochreiter:
    "High Performance Magnetoresistive Sensors";
    Sensors XXXX, 81 (2000), S. 27 - 31.

  330. Autor/innen: Hans Hauser, E366 - AEM; Reinhard Steindl, E366 - MNS; Christian Hausleitner, E366 - MNS; Alfred Pohl, E366 - MNS; Johann Nicolics, E366 - AEM

    H. Hauser, R. Steindl, C. Hausleitner, A. Pohl, J. Nicolics:
    "Wirelessly Interrogable Magnetic Field Sensor Utilizing Giant Magneto-Impedance Effect and Surface Acoustic Wave Devices";
    IEEE Transactions on Instrumentation and Measurement Technology, 49 (2000), S. 648 - 652.

  331. Autor/innen: Hans Hauser, E366 - AEM; Johannes Steurer, E366; Johann Nicolics, E366 - AEM; Ioanna Giouroudi, E366 - MST

    H. Hauser, J. Steurer, J. Nicolics, I. Giouroudi:
    "Wireless Magnetic Field Sensor";
    Journal of Electrical Engineering, 57 (2006), 12; S. 9 - 14.

  332. Autor/innen: Hans Hauser, E366 - AEM; Ronald Zeiller, E366 - AEM; Manuela Franz, E366 - AEM

    H. Hauser, R. Zeiller, M. Franz:
    "The Superconducting Volume Fraction of Polycrystalline, Ceramic High-Temperature Superconductors";
    ekt, 48 (1995), 4; S. 171 - 177.

  333. Autor/innen: Christian Hausleitner, E366 - MNS; Reinhard Steindl, E366 - MNS; Alfred Pohl, E366 - MNS; Hans Hauser, E366 - AEM; Alois Goiser, E366 - MNS; Franz Seifert, E366 - MNS

    C. Hausleitner, R. Steindl, A. Pohl, H. Hauser, A. Goiser, F. Seifert:
    "Cordless Batteryless Wheel Mouse Application Utilizing Radio Requestable SAW Devices in Combination with the Giant Magnetoresistance Effect";
    IEEE Transactions on Microwave Theory and Techniques, 49 (2001), 4; S. 817 - 822.

  334. Autor/innen: J. Hernando-Garcia; Jose Luis Sànchez-Rojas; Ulrich Schmid, E366 - MST; A. Ababneh, Yarmouk University; Günter Marchand; Helmut Seidel, UNI Saarland, LMM

    J. Hernando-Garcia, J.L. Sànchez-Rojas, U. Schmid, A. Ababneh, G. Marchand, H. Seidel:
    "Characterization and displacement control of low surface-stress AlN-based piezoelectric micro-resonators";
    Microsystem Technologies - Micro- and Nanosystems - Information Storage and Processing Systems, 16 (2010), 5; S. 855 - 861.

    Zusätzliche Informationen

  335. Autor/innen: Peter Hinsmann, E164 - AC; Lourdes Arce; Peter Svasek, E366 - MNS; Michael Lämmerhofer; Bernhard Lendl, E164 - UPA

    P Hinsmann, L. Arce, P. Svasek, M. Lämmerhofer, B. Lendl:
    "Separation and on-line distinction of enantiomers - A non-aqueous capillary electrophoresis Fourier transform infrared spectroscopy study";
    Applied Spectroscopy, 58 (2004), S. 662 - 667.

    Zusätzliche Informationen

  336. Autor/innen: Peter Hinsmann, E164 - AC; Johannes Frank, E164 - AC; Peter Svasek, E366 - MNS; Michael Harasek, E166 - 2; Bernhard Lendl, E164 - UPA

    P Hinsmann, J. Frank, P. Svasek, M. Harasek, B. Lendl:
    "Design, simulation and apllication of a new micromixing device for time resolved infrared spectroscopy of chemical reactions in solution";
    Lab on a Chip, 1 (2001), S. 16 - 21.

  337. Autor/innen: Peter Hinsmann, E164 - AC; Michael Haberkorn, E164 - AC; Johannes Frank, E164 - AC; Peter Svasek, E366 - MNS; Michael Harasek, E166 - 2; Bernhard Lendl, E164 - UPA

    P Hinsmann, M. Haberkorn, J. Frank, P. Svasek, M. Harasek, B. Lendl:
    "Time-Resolved FT-IR Spectroscopy of Chemical Reactions in Solution by Fast Diffusion-Based Mixing in a Micromachined Flo";
    Applied Spectroscopy, 55 (2001), 3; S. 241 - 251.

  338. Autor/innen: Ernst Hofer; Franz Keplinger, E366 - MNS; T. Thurner; T. Wiener; D. Sanchez-Quintana; v. Climent; G. Plank

    E. Hofer, F. Keplinger, T. Thurner, T. Wiener, D. Sanchez-Quintana, v. Climent, G. Plank:
    "A new floating sensor array to detect electric near fields of beating heart preparations";
    Biosensors & Bioelectronics, 21 (2006), S. 2232 - 2239.

  339. Autor/innen: Wilfried Hortschitz, ÖAW; Harald Steiner, ÖAW; Matthias Sachse, ÖAW; Franz Kohl, Acad. of Sciences; Johannes Schalko, E366 - MNS; Franz Keplinger, E366 - MNS

    W. Hortschitz, H. Steiner, M. Sachse, F. Kohl, J. Schalko, F. Keplinger:
    "Hybrid Optical MEMS Vibration Sensor";
    Procedia Engineering, 5 (2010), S. 420 - 423.

  340. Autor/innen: Wilfried Hortschitz, ÖAW; Harald Steiner, ÖAW; Matthias Sachse, ÖAW; Michael Stifter, ÖAW; Franz Kohl, Acad. of Sciences; Johannes Schalko, E366 - MNS; Artur Jachimowicz, E366 - MNS; Franz Keplinger, E366 - MNS; Thilo Sauter, ÖAW

    W. Hortschitz, H. Steiner, M. Sachse, M. Stifter, F. Kohl, J. Schalko, A. Jachimowicz, F. Keplinger, T. Sauter:
    "An Optical In-Plane MEMS Vibration Sensor";
    IEEE Sensors Journal (eingeladen), 11 (2011), 11; S. 2805 - 2812.

  341. Autor/innen: Wilfried Hortschitz, ÖAW; Harald Steiner, ÖAW; Matthias Sachse, E366 - MNS; Michael Stifter, ÖAW; Franz Kohl, E366 - MNS; Johannes Schalko, E366 - MNS; Artur Jachimowicz, E366 - MNS; Franz Keplinger, E366 - MNS; Thilo Sauter, ÖAW

    W. Hortschitz, H. Steiner, M. Sachse, M. Stifter, F. Kohl, J. Schalko, A. Jachimowicz, F. Keplinger, T. Sauter:
    "Robust Precision Position Detection With an Optical MEMS Hybrid Device";
    IEEE Transactions on Industrial Electronics, 59 (2012), 12; S. 4855 - 4861.

  342. Autor/innen: E. Hristoforou; Hans Hauser, E366 - AEM; P. Dimitropoulos

    E. Hristoforou, H. Hauser, P. Dimitropoulos:
    "On a New Principle of a Smart Multisensor Based on Magnetic Effects";
    IEEE Sensors Journal, 6 (2006), 2; S. 372 - 379.

  343. Autor/innen: E. Hristoforou; Hans Hauser, E366 - AEM; D. Kepaptsoglou

    E. Hristoforou, H. Hauser, D. Kepaptsoglou:
    "Magnetostrictive Delay Line Characterization";
    Journal of Magnetism and Magnetic Materials, 242 (2002), S. 269 - 271.

  344. Autor/innen: E. Hristoforou; Hans Hauser, E366 - AEM; A. Ktena

    E. Hristoforou, H. Hauser, A. Ktena:
    "Modeling of magnetostriction in amorphous delay lines";
    Journal of Applied Physics, 93 (2003), 10; S. 8633 - 8635.

  345. Autor/innen: Marko Hrovat; Darko Belavic; Andreja Bencan; Janez Bernard; Janez Holc; Jena Cilensek; Walter Smetana, E366 - AEM; Heinz Homolka, E366 - AEM; Roland Reicher, E366 - AEM; L. Golonka; A. Dziedzic; Jaroslaw Kita

    M. Hrovat, D. Belavic, A. Bencan, J. Bernard, J. Holc, J. Cilensek, W. Smetana, H. Homolka, R. Reicher, L. Golonka, A. Dziedzic, J. Kita:
    "Thick-film resistors on various substrates as sensing elements for strain-gauge applications";
    Sensors XXXX, 107 (2003), S. 261 - 272.

  346. Autor/innen: Peter Hudek; I.W. Rangelow; I. Kostic; Günther Stangl, E366 - MNS; P. Grabiec; E. Rangelow; M. Belov; F. Shi

    P. Hudek, I. Rangelow, I. Kostic, G. Stangl, P. Grabiec, E. Rangelow, M. Belov, F. Shi:
    "Chemically amplified deep UV-resists for micromachining using electron beam lithography and dry etching";
    Sensors and Materials, 10 (1998), 4; S. 219 - 227.

  347. Autor/innen: Peter Hudek; I.W. Rangelow; I. Kostic; Günther Stangl, E366 - MNS; Z. Borkowicz; R. Linnemann; L. Hadjiiski; T. Gotszalk

    P. Hudek, I. Rangelow, I. Kostic, G. Stangl, Z. Borkowicz, R. Linnemann, L. Hadjiiski, T. Gotszalk:
    "Submicro- and nanometer structure fabrication using direct electron-beam writing and reactive ion-etching";
    Electron Technology, 28 (1996), 4; S. 251 - 258.

  348. Autor/innen: Karl Humer, E141 - TTPh; Harald W. Weber, E141 - TTPh; Ronald Hastik, E366 - AEM; Hans Hauser, E366 - AEM; Heiko Gerstenberg

    K. Humer, H. W. Weber, N. Hastik, H. Hauser, H. Gerstenberg:
    "Dielectric strength of irradiated fiber reinforced plastics";
    Physica C: Superconductivity and its Applications, 354 (2001), S. 143 - 147.

  349. Autor/innen: Karl Humer, E141 - TTPh; Harald W. Weber, E141 - TTPh; Hans Hauser, E366 - AEM; Heiko Gerstenberg

    K. Humer, H. W. Weber, H. Hauser, H. Gerstenberg:
    "Dielectric strength, swelling and weight loss of the ITER Toroidal Field Model Coil insulation after low temperature reactor irradiation";
    Cryogenics, 40 (2000), S. 295 - 301.

  350. Autor/innen: J. Iannacci, CMM-FBK, Trento; Guido Sordo, E366 - MST; Enrico Serra, CMM-FBK, Trento; Ulrich Schmid, E366 - MST

    J. Iannacci, G. Sordo, E. Serra, U. Schmid:
    "The MEMS four‑leaf clover wideband vibration energy harvesting device: design concept and experimental verification";
    Microsystem Technologies - Micro- and Nanosystems - Information Storage and Processing Systems, 22 (2016), S. 1865 - 1881.

    Zusätzliche Informationen

  351. Autor/innen: S. Ilincic, ACēT; N. Tungkunagom, ACēT; András Vernes, E134; G. Vorlaufer, ACēT; P.A. Fotiu; Friedrich Franek, E366 - MST

    S. Ilincic, N. Tungkunagom, A. Vernes, G. Vorlaufer, P. Fotiu, F. Franek:
    "Finite and boundary element method contact mechanics on rough, artificial hip joints";
    Proceedings of the Institution of Mechanical Engineers Part J - Journal of Engineering Tribology, 225 (2011), 11; S. 1081 - 1091.

    Zusätzliche Informationen

  352. Autor/innen: S. Ilincic, ACēT; A. Vernes, ACēT; G. Vorlaufer, ACēT; H. Hunger; Nicole Dörr, ACēT; Friedrich Franek, E366 - MST

    S. Ilincic, A. Vernes, G. Vorlaufer, H. Hunger, N. Dörr, F. Franek:
    "Numerical estimation of wear in reciprocating tribological experiments";
    Proceedings of the Institution of Mechanical Engineers Part J - Journal of Engineering Tribology, Vol. 227 (2013), No. 5; S. 510 - 519.

    Zusätzliche Informationen

  353. Autor/innen: S. Ilincic, ACēT; G. Vorlaufer, ACēT; P.A. Fotiu; A. Vernes, ACēT; Friedrich Franek, E366 - MST

    S. Ilincic, G. Vorlaufer, P. Fotiu, A. Vernes, F. Franek:
    "Combined finite element-boundary element method modelling of elastic multi-asperity contacts";
    Proceedings of the Institution of Mechanical Engineers Part J - Journal of Engineering Tribology, 223 (2009), 5; S. 767 - 776.

    Zusätzliche Informationen

  354. Autor/innen: V. P. Iordanov; J. Bastemeijer; R. Ishihara; Pasqualina M. Sarro; A. Bossche; Michael J. Vellekoop, E366 - MNS

    V. Iordanov, J. Bastemeijer, R. Ishihara, P. M. Sarro, A. Bossche, M. Vellekoop:
    "Filter-protected Photodiodes for High-Throughput Enzymatic Analysis";
    IEEE Sensors Journal, 4 (2004), 5; S. 584 - 588.

  355. Autor/innen: V. P. Iordanov; G. W. Lubking; R. Ishihara; R. F. Wolffenbuttel; Pasqualina M. Sarro; Michael J. Vellekoop, E366 - MNS

    V. Iordanov, G. W. Lubking, R. Ishihara, R. Wolffenbuttel, P. M. Sarro, M. Vellekoop:
    "Silicon thin-film UV filter for NADH fluorescence analysis";
    Sensors XXXX, 97-98 (2002), S. 161 - 166.

  356. Autor/innen: Katerina Ivanova; Tzvetan Ivanov; Ali Badar; Burkhard E. Volland; I.W. Rangelow; Daniela Andrijasevic, E366 - MST; Franz Sümecz, E366 - MST; Stephanie Fischer; Manfred Spitzbart; Werner Brenner, E366 - MST; I. Kostic

    K. Ivanova, T. Ivanov, A. Badar, B. Volland, I. Rangelow, D. Andrijasevic, F. Sümecz, St. Fischer, M. Spitzbart, W. Brenner, I. Kostic:
    "Thermally driven microgripper as a tool for micro assembly";
    Microelectronic Engineering, 83 (2006), 4 - 9; S. 1393 - 1395.

  357. Autor/innen: Bernhard Jakoby, E366 - MNS; Georg Art, E366; J. Bastemeijer

    B. Jakoby, G. Art, J. Bastemeijer:
    "Novel Analog Readout Electronics for Microacoustic Thickness Shear-Mode Sensors";
    IEEE Sensors Journal, 5 (2005), 5; S. 1106 - 1111.

  358. Autor/innen: Bernhard Jakoby, JKU Linz; Alireza R. Baghai-Wadji, E366 - MNS

    B. Jakoby, A.R. Baghai-Wadji:
    "Analysis of Bianisotropic Layered Structures with Laterally Periodic Inhomogeneities - An Eigenoperator Formulation";
    IEEE Transactions on Antennas and Propagation, 44 (1996), 5; S. 615 - 626.

  359. Autor/innen: Bernhard Jakoby, JKU Linz; Roman Beigelbeck; Franz Keplinger, E366 - MNS; F. Lucklum; Alexander Niedermeyer; E. K. Reichel, JKU Linz - Mikroelec; Christian Riesch, E366 - MNS; Thomas Voglhuber-Brunnmaier, JKU Linz; B. Weiss, JKU Linz - Mikroelek

    B. Jakoby, R. Beigelbeck, F. Keplinger, F. Lucklum, A. Niedermeyer, E. Reichel, Ch. Riesch, T. Voglhuber-Brunnmaier, B. Weiss:
    "Miniaturized Sensors for the Viscosity and Density of Liquids - Performance and Issues";
    IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 57 (2010), 1; S. 111 - 120.

  360. Autor/innen: Bernhard Jakoby, E366 - MNS; A. Ecker; Michael J. Vellekoop, E366 - MNS

    B. Jakoby, A. Ecker, M. Vellekoop:
    "Monitorin macro- and microemulsions using physical chemosensors";
    Sensors XXXX, 115 (2004), S. 209 - 214.

  361. Autor/innen: Bernhard Jakoby, E366 - MNS; H. Eisenschmid; F. Herrmann

    B. Jakoby, H. Eisenschmid, F. Herrmann:
    "The Potential of Microacoustic SAW- and BAW-Based Sensors for Automotive Applications - A Review";
    IEEE Sensors Journal, 2 (2002), 5; S. 443 - 452.

  362. Autor/innen: Bernhard Jakoby, E366 - MNS; Franz Peter Klinger, E366; Peter Svasek, E366 - MNS

    B. Jakoby, F.P. Klinger, P. Svasek:
    "A novel microacoustic viscosity sensor providing integrated sample temperature control";
    Sensors XXXX, 123-124 (2005), S. 274 - 280.

  363. Autor/innen: Bernhard Jakoby, E366 - MNS; E. K. Reichel, JKU Linz - Mikroelec; Christian Riesch, E366 - MNS; F. Lucklum; B. Weiss, JKU Linz - Mikroelek; Franz Keplinger, E366 - MNS; M. Scherer; L. Follens; C. Kirschhock; W. Hilber

    B. Jakoby, E. Reichel, Ch. Riesch, F. Lucklum, B. Weiss, F. Keplinger, M. Scherer, L. Follens, C. Kirschhock, W. Hilber:
    "Condition monitoring of viscous liquids using microsensors";
    E&I Elektrotechnik und Informationstechnik, 126 (2009), 5; S. 164 - 172.

  364. Autor/innen: Bernhard Jakoby, E366 - MNS; M. Scherer; M. Buskies; H. Eisenschmid

    B. Jakoby, M. Scherer, M. Buskies, H. Eisenschmid:
    "An Automotive Engine Oil Viscosity Sensor";
    IEEE Sensors Journal, 3 (2003), 5; S. 562 - 568.

  365. Autor/innen: Bernhard Jakoby, JKU Linz; Michael J. Vellekoop, E366 - MNS

    B. Jakoby, M. Vellekoop:
    "Editorial";
    Procedia Engineering, 5 (2010), i; S. 1.

  366. Autor/innen: Bernhard Jakoby, E366 - MNS; Michael J. Vellekoop, E366 - MNS

    B. Jakoby, M. Vellekoop:
    "Miniaturized Sensors for Monitoring and Physical Chemosensor Applications";
    Geophysical Research Abstracts (GRA), 7 (2005), 07930.

  367. Autor/innen: Bernhard Jakoby, JKU Linz; Michael J. Vellekoop, E366 - MNS

    B. Jakoby, M. Vellekoop:
    "Physical Sensors for Liquid Properties";
    IEEE Sensors Journal (eingeladen), 11 (2011), 12; S. 3076 - 3085.

  368. Autor/innen: Bernhard Jakoby, E366 - MNS; Michael J. Vellekoop, E366 - MNS

    B. Jakoby, M. Vellekoop:
    "Physical sensors for water-in-oil emulsions";
    Sensors XXXX, 110 (2004), S. 28 - 32.

  369. Autor/innen: Mirko Jakovljevic, E366 - MST; P.A. Fotiu; Z. Mrcarica, E366 - MST; Helmut Detter, E366 - MST

    M. Jakovljevic, P. Fotiu, Z. Mrcarica, H. Detter:
    "A system-level simulation of complex multi-domain microsystems by using analogue hardware description languages";
    Sensors XXXX, 82 (2000), S. 30 - 39.

  370. Autor/innen: Olga Jaksic, CoAutor - E366-MST; Zoran Jaksic; Jovan Matovic, E366 - MST

    O. Jaksic, Z. Jaksic, J. Matovic:
    "Adsorption-desorption noise in plasmonic chemical/biological sensors for multiple analyte environment";
    Microsystem Technologies - Micro- and Nanosystems - Information Storage and Processing Systems, 16 (2010), S. 735 - 743.

    Zusätzliche Informationen

  371. Autor/innen: Zoran Jaksic; Jovan Matovic, E366 - MST

    Z. Jaksic, J. Matovic:
    "Functionalization of Artificial Freestanding Composite Nanomembranes";
    Materials, 3 (2010), S. 165 - 200.

    Zusätzliche Informationen

  372. Autor/innen: Zoran Jaksic; Jovan Matovic, E366 - MST

    Z. Jaksic, J. Matovic:
    "Performance limits to the operation of nanoplasmonic chemical sensors: noise-equivalent refractive index and detectivity";
    Journal Of Nanophotonics, 3 (2009), 1.

    Zusätzliche Informationen

  373. Autor/innen: Zoran Jaksic; S. Ostojic; Dragan Tanaskovic, CoAutor - E366-MST; Jovan Matovic, E366 - MST

    Z. Jaksic, S. Ostojic, D. Tanaskovic, J. Matovic:
    "Vacuum Fluctuations in Optical Metamaterials Containing Nonlinear Dielectrics";
    Acta Physica Polonica A, 116 (2009), 4; S. 628 - 630.

    Zusätzliche Informationen

  374. Autor/innen: Zoran Jaksic; Dragan Tanaskovic, CoAutor - E366-MST; Jovan Matovic, E366 - MST

    Z. Jaksic, D. Tanaskovic, J. Matovic:
    "Fishnet-Based Metamaterials: Spectral Tuning Through Adsorption Mechanism";
    Acta Physica Polonica A, 2009 (2009), 4; S. 625 - 627.

    Zusätzliche Informationen

  375. Autor/innen: Zoran Jaksic; Slobodan Vukovic, CoAutor - E366-MST; J. Buha, CoAutor - E366-MST; Jovan Matovic, E366 - MST

    Z. Jaksic, M. Vukovic, J. Buha, J. Matovic:
    "Nanomembrane-Based Plasmonics";
    Journal Of Nanophotonics, 5 (2011), 1.

    Zusätzliche Informationen

  376. Autor/innen: Zoran Jaksic; Slobodan Vukovic, CoAutor - E366-MST; Jovan Matovic, E366 - MST; Dragan Tanaskovic, CoAutor - E366-MST

    Z. Jaksic, M. Vukovic, J. Matovic, D. Tanaskovic:
    "Negative Refractive Index Metasurfaces for Enhanced Biosensing";
    Materials, 4 (2011), S. 1 - 36.

    Zusätzliche Informationen

  377. Autor/innen: Murad Aziz Jamalieh, E366 - MNS; Georgios Kokkinis, E366 - MNS; Christoph Haiden, E366 - MNS; Theocharis Berris, E366 - MNS; Franz Keplinger, E366 - MNS; Ioanna Giouroudi, E366 - MNS

    M. Jamalieh, G. Kokkinis, C. Haiden, T. Berris, F. Keplinger, I. Giouroudi:
    "Microfluidic platform for pathogen load monitoring";
    Microelectronic Engineering, 158 (2016), S. 91 - 94.

  378. Autor/innen: Robin Jisa, ACēT; A. Ristic, ACēT; Josef Brenner, ACēT; Thomas Lebersorger, ACēT; S. Ilo, ACēT; H. Neumayer, Enzesfeld-Caro; Friedrich Franek, E366 - MST

    R. Jisa, A. Ristic, J. Brenner, Th. Lebersorger, S. Ilo, H. Neumayer, F. Franek:
    "Effectiveness of lubricant additives for copper-alloy-steel sliding contacts";
    Lubrication Science, 22 (2010), 5; S. 183 - 193.

    Zusätzliche Informationen

  379. Autor/innen: G. Jobst; Isabella Moser; Peter Svasek, E366 - MNS; Mohammad Mehdi Varahram, E366 - MNS; Z Trajanoski; P Wach; F Skrabal; Gerald Urban

    G. Jobst, I. Moser, P. Svasek, M. Varahram, Z. Trajanoski, P. Wach, F. Skrabal, G. Urban:
    "Mass producible miniaturized flow through a device with a biosensor array";
    Sensors and Actuators B: Chemical, 43 (1997), S. 121 - 125.

  380. Autor/innen: Puu-An Juang; Werner Brenner, E366 - MST

    P. Juang, W. Brenner:
    "The Transfer Function of a New Disc-Type Ultrasonic Motor";
    Sensors XXXX, 100 (2002), S. 272 - 280.

  381. Autor/innen: Puu-An Juang; Werner Brenner, E366 - MST

    P. Juang, W. Brenner:
    "Vibration Characteristic Identification by Experiment of a New Disc-Type Ultrasonic Stator";
    Journal of Micromechanics and Microengineering, 12 (2002), S. 598 - 603.

  382. Autor/innen: Werner Jüngling, E360; P. Pichler, E366; Siegfried Selberherr, E360; E. Guerrero; Hans Pötzl, E366

    W. Jüngling, P. Pichler, S. Selberherr, E. Guerrero, H. Pötzl:
    "Simulation of Critical IC Fabrication Processes Using Advanced Physical and Numerical Methods";
    IEEE Transactions on Electron Devices, 32 (1985), 2; S. 156 - 167.

    Zusätzliche Informationen

  383. Autor/innen: Werner Jüngling, E360; P. Pichler, E366; Siegfried Selberherr, E360; E. Guerrero; Hans Pötzl, E366

    W. Jüngling, P. Pichler, S. Selberherr, E. Guerrero, H. Pötzl:
    "Simulation of Critical IC Fabrication Processes Using Advanced Physical and Numerical Methods";
    IEEE Journal of Solid-State Circuits, 20 (1985), 1; S. 76 - 87.

    Zusätzliche Informationen

  384. Autor/innen: L. Juhas; S. Markov; L. Nagy; B. Borovac; Aleksandar Vujanic, E366 - MST; Nadja Delic-Adamovic, E366 - MST

    L. Juhas, S. Markov, L. Nagy, B. Borovac, A. Vujanic, N. Delic-Adamovic:
    "Pokretna platforma za mikroprozicioniranje uzoraka"";
    ICRA 2000, 54 (5) (2000), S. 243 - 257.

  385. Autor/innen: Andreas Franz Hubert Kainz, E366 - MNS; Wilfried Hortschitz, Donau-Uni Krems; Artur Jachimowicz, E366 - MNS; Harald Steiner, Donau-Uni Krems; Johannes Schalko, E366 - MNS; Franz Keplinger, E366 - MNS

    A. Kainz, W. Hortschitz, A. Jachimowicz, H. Steiner, J. Schalko, F. Keplinger:
    "Accurate Analytical Model for Air Damping in Lateral MEMS/MOEMS Oscillators";
    Sensors and Actuators A: Physical, 255 (2017), S. 154 - 159.

  386. Autor/innen: Andreas Franz Hubert Kainz, E366 - MNS; Wilfried Hortschitz, ÖAW; Johannes Schalko, ÖAW; Artur Jachimowicz, E366 - MNS; Franz Keplinger, E366 - MNS

    A. Kainz, W. Hortschitz, J. Schalko, A. Jachimowicz, F. Keplinger:
    "Air damping as design feature in lateral oscillators";
    Sensors and Actuators A: Physical, 236 (2015), 1; S. 357 - 363.

  387. Autor/innen: C. Katsich, ACēT; Ewald Badisch, ACēT; Manish Roy, ACēT; G. R. Heath, Castolin; Friedrich Franek, E366 - MST

    C. Katsich, E. Badisch, M. Roy, G. Heath, F. Franek:
    "Erosive wear of hardfaced Fe-Cr-C alloys at elevated temperature";
    Wear, 267 (2009), S. 1856 - 1864.

    Zusätzliche Informationen

  388. Autor/in: Hans-Jörg Katzgraber, E366

    H. Katzgraber:
    "Das Erdmagnetfeld - Forschung in Geschichte und Moderne";
    Der Sternenbote, 620 (2008), 3; S. 42 - 49.

  389. Autor/in: Hans-Jörg Katzgraber, E366

    H. Katzgraber:
    "Die Leitersprossenmethode";
    Der Sternenbote, 634 (2009), 5; S. 86 - 87.

  390. Autor/innen: Nina Kaun, E164 - UPA; Stephan Kulka, E164 - UPA; Johannes Frank, E164 - AC; Ulrich Schade; Michael J. Vellekoop, E366 - MNS; Michael Harasek, E166 - 2; Bernhard Lendl, E164 - UPA

    N. Kaun, S. Kulka, J. Frank, U. Schade, M. Vellekoop, M. Harasek, B. Lendl:
    "Towards biochemical reaction monitoring using FT-IR synchrotron radiation";
    Analyst, 131 (2006), 4; S. 489 - 494.

    Zusätzliche Informationen

  391. Autor/innen: Nina Kaun, E164 - UPA; Michael J. Vellekoop, E366 - MNS; Bernhard Lendl, E164 - UPA

    N. Kaun, M. Vellekoop, B. Lendl:
    "Time-resolved Fourier transform infrared spectroscopy of chemical reactions in solution using a focal plane array detector";
    Applied Spectroscopy, 60 (2006), 11; S. 1273 - 1278.

    Zusätzliche Informationen

  392. Autor/innen: Wolfgang Kausel, E360; J.O. Nylander; Gerd Nanz, E360; Siegfried Selberherr, E360; Hans Pötzl, E366

    W. Kausel, J.O. Nylander, G. Nanz, S. Selberherr, H. Pötzl:
    "BAMBI - A Transient 2D-MESFET Model with General Boundary Conditions Including Schottky and Current Controlled Contacts";
    Microelectronics Journal, 21 (1990), 5; S. 5 - 21.

    Zusätzliche Informationen

  393. Autor/innen: Wolfgang Kausel, E360; Hans Pötzl, E366; Gerd Nanz, E360; Siegfried Selberherr, E360

    W. Kausel, H. Pötzl, G. Nanz, S. Selberherr:
    "Two-Dimensional Transient Simulation of the Turn-Off Behavior of a Planar MOS-Transistor";
    Solid-State Electronics, 32 (1989), 9; S. 685 - 709.

    Zusätzliche Informationen

  394. Autor/innen: Michael Kellner, E163 - Gruber; Philip Radovanovic, E163 - Gruber; Jovan Matovic, E366 - MST; Robert Liska, E163 - Gruber

    M. Kellner, P. Radovanovic, J. Matovic, R. Liska:
    "Novel cross-linkers for asymmetric poly-AMPS-based proton exchange membranes for fuel cells";
    Designed Monomers and Polymers, (2013), S. 1 - 8.

  395. Autor/innen: Franz Keplinger, E366 - MNS; Roman Beigelbeck; Rainer Fasching; Samuel Kvasnica, E366 - MNS

    F. Keplinger, R. Beigelbeck, R. Fasching, S. Kvasnica:
    "Miniaturized Cantilever Device with a Broad Measurement Area to Determine Two Orthogonal Magnetic Flux Density Components";
    Geophysical Research Abstracts (GRA), 7 (2005), 11086.

  396. Autor/innen: Franz Keplinger, E366 - MNS; Artur Jachimowicz; Franz Kohl, E366 - MNS

    F. Keplinger, A. Jachimowicz, F. Kohl:
    "Water Flux across Neutral Carrier Membranes";
    Analytical Chemistry, 70 (1998), S. 4271 - 4279.

  397. Autor/innen: Franz Keplinger, E366 - MNS; Samuel Kvasnica, E366 - MNS; Hans Hauser, E366 - AEM; Roland Grössinger, E138

    F. Keplinger, S. Kvasnica, H. Hauser, R. Grössinger:
    "Optical Readouts of Cantilever Bending Designed for High Magnetic Field Application";
    IEEE Transactions on Magnetics, Vol. 39 (2003), No. 5; S. 3304 - 3306.

  398. Autor/innen: Franz Keplinger, E366 - MNS; Samuel Kvasnica, E366 - MNS; Artur Jachimowicz, E366 - MNS; Franz Kohl, E366 - MNS; Johannes Steurer, E366; Hans Hauser, E366 - AEM

    F. Keplinger, S. Kvasnica, A. Jachimowicz, F. Kohl, J. Steurer, H. Hauser:
    "Lorentz force based magnetic field sensor with optical readout";
    Sensors XXXX, 110 (2004), S. 112 - 118.

  399. Autor/innen: M. Kirchgaßner; Ewald Badisch, ACēT; Friedrich Franek, E366 - MST

    M. Kirchgaßner, E. Badisch, F. Franek:
    "Behaviour of iron-based hardfacing alloys under abrasion and impact";
    Wear, 265 (2008), 5-6; S. 772 - 779.

    Zusätzliche Informationen

  400. Autor/innen: Milica Kisic, Univ.-Novi Sad; N. V. Blaz, Univ. Novi Sad; Kalman Babkovic, Univ.-Novi Sad; A. Maric, Uni Novi Sad, Serbia; Goran Radosavljevic, E366 - AEM; D.Lj. Zivanov; Mirjana Damnjanovic, Univ. Novi Sad

    M. Kisic, N. V. Blaz, K. Babkovic, A. Maric, G. Radosavljevic, D. Zivanov, M. Damnjanovic:
    "Passive Wireless Sensor for Force Measurements";
    IEEE Transactions on Magnetics, 51 (2015), 1; S. 40020041 - 40020044.

  401. Autor/innen: Milica Kisic, Univ.-Novi Sad; N. V. Blaz, Univ. Novi Sad; Kalman Babkovic, Univ.-Novi Sad; A. Maric, Uni Novi Sad, Serbia; Goran Radosavljevic, E366 - AEM; D.Lj. Zivanov; Mirjana Damnjanovic, Univ. Novi Sad

    M. Kisic, N. V. Blaz, K. Babkovic, A. Maric, G. Radosavljevic, D. Zivanov, M. Damnjanovic:
    "Performance Analysis of a Flexible Polymide Based Device for Displacement Sensing";
    Facta universitatis - series: Electronics and Energetics, 28 (2015), 2; S. 287 - 296.

  402. Autor/innen: M. E. Kiziroglou; A. Elefsiniotis, E366 - MST; N. Kokorakis, EADS; S. W. Wright; T. T. Toh; P. D. Mitcheson; Ulrich Schmid, E366 - MST; Thomas Becker, EADS; E. M. Yeatman

    M. Kiziroglou, A. Elefsiniotis, N. Kokorakis, S. Wright, T. Toh, P. Mitcheson, U. Schmid, Th. Becker, E. Yeatman:
    "Scaling and super‑cooling in heat storage harvesting devices";
    Microsystem Technologies - Micro- and Nanosystems - Information Storage and Processing Systems, 22 (2016), S. 1905 - 1914.

    Zusätzliche Informationen

  403. Autor/innen: S. Klein; Helmut Seidel, UNI Saarland, LMM; Achim Bittner, E366 - MST; Ulrich Schmid, E366 - MST

    S. Klein, H. Seidel, A. Bittner, U. Schmid:
    "CMOS-Compatible RF-MEMS Switches";
    Microsystems Technology in Germany 2010 (eingeladen), 2010 (2010), S. 56 - 57.

  404. Autor/innen: Malin Kölhed; Peter Hinsmann, E164 - AC; Johannes Frank, E164 - AC; Peter Svasek, E366 - MNS

    M. Kölhed, P Hinsmann, J. Frank, P. Svasek:
    "On-line Fourier Transform Infrared Detection in Capillary Electrophoresis ";
    Analytical Chemistry, 74 (2002), 15; S. 3843 - 3848.

    Zusätzliche Informationen

  405. Autor/innen: Malin Kölhed; Peter Hinsmann, E164 - AC; Johannes Frank, E164 - AC; Peter Svasek, E366 - MNS; Bo Karlberg; Bernhard Lendl, E164 - UPA

    M. Kölhed, P Hinsmann, J. Frank, P. Svasek, B. Karlberg, B. Lendl:
    "On-line Fourier Transform Infrared Detection in Capillary Electrophoresis";
    Analytical Chemistry, 74 (2002), S. 3842 - 3848.

  406. Autor/innen: Franz Kohl, Acad. of Sciences; Roman Beigelbeck; Jochen Kuntner, E366 - MNS; Johannes Schalko, E366 - MNS; Artur Jachimowicz, E366 - MNS

    F. Kohl, R. Beigelbeck, J. Kuntner, J. Schalko, A. Jachimowicz:
    "Zur Emissivität partiell transparenter, dielektrischer Schichten";
    Elektrotechnik und Informationstechnik (e&i), 125 (2008), 3; S. 56 - 64.

  407. Autor/innen: Franz Kohl, Acad. of Sciences; Roman Beigelbeck, ÖAW; Jochen Kuntner, E366 - MNS; Johannes Schalko, E366 - MNS; Amir Talic, ÖAW; Samir Cerimovic, E366 - MNS

    F. Kohl, R. Beigelbeck, J. Kuntner, J. Schalko, A. Talic, S. Cerimovic:
    "Advanced structures for heat transfer studies on diaphragms";
    Procedia Engineering, 5 (2010), S. 898 - 901.

  408. Autor/innen: Franz Kohl, E366 - MNS; Rainer Fasching; Franz Keplinger, E366 - MNS; Rupert Chabicovsky, E366 - MNS; Artur Jachimowicz, E366 - MNS; Gerald Urban

    F. Kohl, R. Fasching, F. Keplinger, R. Chabicovsky, A. Jachimowicz, G. Urban:
    "Development of miniaturized semiconductor flow sensors";
    Measurement, 33 (2003), S. 109 - 119.

  409. Autor/innen: Franz Kohl, E366 - MNS; Franz Keplinger, E366 - MNS; Artur Jachimowicz, E366 - MNS; Johannes Schalko, E366 - MNS

    F. Kohl, F. Keplinger, A. Jachimowicz, J. Schalko:
    "A Model of Metalfilm resistance bolometers based on the electro-thermal feedback effect";
    Sensors XXXX, 115 (2004), S. 308 - 317.

  410. Autor/innen: Franz Kohl, E366 - MNS; Gerald Urban; Johannes Steurer, E366; Fethi Olcaytug, E366 - MNS; Artur Jachimowicz; A. Glaninger, E366 - MNS; Franz Keplinger, E366 - MNS; Rainer Fasching, E366 - MNS; Dalibor Biacovsky, E366 - MNS

    F. Kohl, G. Urban, J. Steurer, F. Olcaytug, A. Jachimowicz, A. Glaninger, F. Keplinger, R. Fasching, D. Biacovsky:
    "Silizium-Mikrotechnik für thermische Sensoren";
    Elektrotechnik und Informationstechnik (e&i), 115 (1998), 7/8; S. 391 - 395.

    Zusätzliche Informationen

  411. Autor/innen: G. Kokkinis; Susana F. Cardoso, INESC Lisbon; Filipe Arroyo Cardoso, INESC Lisbon; Ioanna Giouroudi, E366 - MNS

    G. Kokkinis, S. F. Cardoso, F. Arroyo Cardoso, I. Giouroudi:
    "Microfluidics for the Rapid Detection of Pathogens Using Giant Magnetoresistance Sensors";
    IEEE Transactions on Magnetics, 50 (2014), 11; S. 44013041 - 44013044.

  412. Autor/innen: Georgios Kokkinis, E366 - MNS; Susana F. Cardoso, INESC Lisbon; Franz Keplinger, E366 - MNS; Ioanna Giouroudi, E366 - MNS

    G. Kokkinis, S. F. Cardoso, F. Keplinger, I. Giouroudi:
    "Microfluidic platform with integrated GMR sensors for quantification of cancer cells";
    Sensors and Actuators B: Chemical, 241 (2017), S. 438 - 445.

  413. Autor/innen: G. Kokkinis; Alexander Dangl; Franz Keplinger, E366 - MNS; Ioanna Giouroudi, E366 - MNS

    G. Kokkinis, A. Dangl, F. Keplinger, I. Giouroudi:
    "Microfluidic biosensing method using the motion of magnetic microparticles";
    Key Engineering Materials, 605 (2014), S. 348 - 351.

  414. Autor/innen: G. Kokkinis; Murad Aziz Jamalieh, E366 - MNS; Susana F. Cardoso, INESC Lisbon; F.A. Cardoso; Franz Keplinger, E366 - MNS; Ioanna Giouroudi, E366 - MNS

    G. Kokkinis, M. Jamalieh, S. F. Cardoso, F.A. Cardoso, F. Keplinger, I. Giouroudi:
    "Magnetic based Biomolecule Detection using GMR Sensors";
    Journal of Applied Physics, 117 (2015), 5 S.

  415. Autor/innen: G. Kokkinis; Franz Keplinger, E366 - MNS; Ioanna Giouroudi, E366 - MNS

    G. Kokkinis, F. Keplinger, I. Giouroudi:
    "On-chip microfluidic biosensor using superparamagnetic microparticles";
    Biomicrofluidics, 7 (2013), 5; S. 054117-1 - 054117-14.

  416. Autor/innen: Georgios Kokkinis, E366 - MNS; Birgit Plochberger, E134; Susana F. Cardoso, INESC Lisbon; Franz Keplinger, E366 - MNS; Ioanna Giouroudi, E366 - MNS

    G. Kokkinis, B. Plochberger, S. F. Cardoso, F. Keplinger, I. Giouroudi:
    "Microfluidic, dual-purpose sensor for in-vitro detection of Enterobacteriaceae and biotinylated antibodies";
    Lab on a Chip, 1 (2016), 12 S.

  417. Autor/innen: Jürgen Kosel, E354; Hans Hauser, E366 - AEM; Yuri S. Didosyan, E366 - AEM; Gerhard Pertl, E366 - AEM

    J. Kosel, H. Hauser, Y. Didosyan, G. Pertl:
    "Stress dependence of the differential susceptibility of soft magnetic ribbons";
    Journal of Applied Physics, 97 (2005), 10F902; S. 1 - 3.

  418. Autor/innen: Jürgen Kosel, E354; Hans Hauser, E366 - AEM; Gerhard Pertl, E366 - AEM

    J. Kosel, H. Hauser, G. Pertl:
    "Measurement of the differential susceptibility of soft magnetic ribbons under applied tensile and compressive stress";
    Sensors XXXX, 129 (2006), S. 34 - 36.

  419. Autor/innen: Stefan Kostner, E366 - MNS; Sander Van den Driesche, E366 - MNS; W. Witarski; Silvia Pastorekova, Slov.Acad.Wiss.; Michael J. Vellekoop, E366 - MNS

    S. Kostner, S. Van den Driesche, W. Witarski, S. Pastorekova, M. Vellekoop:
    "Guided Dielectrophoresis: A Robust Method for Continuous Particle and Cell Separation";
    IEEE Sensors Journal, 10 (2010), 9; S. 1440 - 1446.

  420. Autor/innen: Stefan Kostner, E366 - MNS; Michael J. Vellekoop, E366 - MNS

    S. Kostner, M. Vellekoop:
    "Cell analysis in a microfluid cytometer applying a DVD pickup head";
    Sensors and Actuators B: Chemical, 132 (2008), S. 512 - 517.

  421. Autor/innen: Stefan Kostner, E366 - MNS; Michael J. Vellekoop, E366 - MNS

    S. Kostner, M. Vellekoop:
    "DVD pickup heads for optical measurement applications";
    Elektrotechnik und Informationstechnik (e&i), 125 (2008), 3; S. 98 - 101.

  422. Autor/innen: Stefan Kostner, E366 - MNS; Michael J. Vellekoop, E366 - MNS

    S. Kostner, M. Vellekoop:
    "Interpretation of projection cytometer signals for cell analysis";
    Sensors and Actuators B: Chemical, 132 (2008), S. 631 - 636.

  423. Autor/innen: Stefan Kostner, E366 - MNS; Michael J. Vellekoop, E366 - MNS

    S. Kostner, M. Vellekoop:
    "Microsystems for Optical Cell Detection: Near versus Far Field";
    Particle & Particle Systems Characterization, 25 (2008), S. 92 - 98.

  424. Autor/in: Pero Krivic, E366 - AEM

    P. Krivic:
    "Introduction of LTCC technology in fabrication of the planar microcoils for NMR spectroscopy";
    Advanced Materials Research, 685 (2013), S. 362 - 366.

  425. Autor/innen: Martin Kucera, E366 - MST; Franz Hofbauer, E366 - MST; Elisabeth Wistrela, E366 - MST; T. Manzaneque; V. Ruiz-Díez; Jose Luis Sànchez-Rojas; Achim Bittner, E366 - MST; Ulrich Schmid, E366 - MST

    M. Kucera, F. Hofbauer, E Wistrela, T. Manzaneque, V Ruiz-Díez, J.L. Sànchez-Rojas, A. Bittner, U. Schmid:
    "Lock‑in amplifier powered analogue Q‑control circuit for self‑actuated self‑sensing piezoelectric MEMS resonators";
    Microsystem Technologies - Micro- and Nanosystems - Information Storage and Processing Systems, 20 (2014), S. 615 - 625.

    Zusätzliche Informationen

  426. Autor/innen: Martin Kucera, E366 - MST; T. Manzaneque; Jose Luis Sànchez-Rojas; Achim Bittner, E366 - MST; Ulrich Schmid, E366 - MST

    M. Kucera, T. Manzaneque, J.L. Sànchez-Rojas, A. Bittner, U. Schmid:
    "Q-factor enhancement for self-actuated self-sensing piezoelectric MEMS resonators applying a lock-in driven feedback loop";
    Journal of Micromechanics and Microengineering, 23 (2013).

    Zusätzliche Informationen

  427. Autor/innen: Martin Kucera, E366 - MST; Elisabeth Wistrela, E366 - MST; Georg Pfusterschmied, E366 - MST; V. Ruiz-Díez; T. Manzaneque; J. Hernando-Garcia; Jose Luis Sànchez-Rojas; Artur Jachimowicz, E366 - MNS; Johannes Schalko, E366 - MNS; Achim Bittner, E366 - MST; Ulrich Schmid, E366 - MST

    M. Kucera, E Wistrela, G. Pfusterschmied, V Ruiz-Díez, T. Manzaneque, J. Hernando-Garcia, J.L. Sànchez-Rojas, A. Jachimowicz, J. Schalko, A. Bittner, U. Schmid:
    "Design-dependent performance of self-actuated and self-sensing piezoelectric-AlN cantilevers in liquid media oscillating in the fundamental in-plane bending mode";
    Sensors and Actuators B: Chemical, 200 (2014), S. 235 - 244.

  428. Autor/innen: Martin Kucera, E366 - MST; Elisabeth Wistrela, E366 - MST; Georg Pfusterschmied, E366 - MST; V. Ruiz-Díez; T. Manzaneque; Jose Luis Sànchez-Rojas; Johannes Schalko, E366 - MNS; Achim Bittner, E366 - MST; Ulrich Schmid, E366 - MST

    M. Kucera, E Wistrela, G. Pfusterschmied, V Ruiz-Díez, T. Manzaneque, J.L. Sànchez-Rojas, J. Schalko, A. Bittner, U. Schmid:
    "Characterization of a roof tile-shaped out-of-plane vibrational mode in aluminum-nitride-actuated self-sensing micro-resonators for liquid monitoring purposes";
    Applied Physics Letters, 104 (2014), S. 2335011 - 2335014.

  429. Autor/innen: Martin Kucera, E366 - MST; Elisabeth Wistrela, E366 - MST; Georg Pfusterschmied, E366 - MST; V. Ruiz-Díez; Jose Luis Sànchez-Rojas; Johannes Schalko, E366 - MNS; Achim Bittner, E366 - MST; Ulrich Schmid, E366 - MST

    M. Kucera, E Wistrela, G. Pfusterschmied, V Ruiz-Díez, J.L. Sànchez-Rojas, J. Schalko, A. Bittner, U. Schmid:
    "Characterisation of multi roof tile-shaped out-of-plane vibrational modes in aluminiumnitride- actuated self-sensing micro-resonators in liquid media";
    Applied Physics Letters, 107 (2015).

    Zusätzliche Informationen

  430. Autor/innen: Martin Kucera, E366 - MST; Elisabeth Wistrela, E366 - MST; Georg Pfusterschmied, E366 - MST; V. Ruiz-Díez; Jose Luis Sànchez-Rojas; Johannes Schalko, E366 - MNS; Achim Bittner, E366 - MST; Ulrich Schmid, E366 - MST

    M. Kucera, E Wistrela, G. Pfusterschmied, V Ruiz-Díez, J.L. Sànchez-Rojas, J. Schalko, A. Bittner, U. Schmid:
    "Characterization of a roof tile-shaped out-of-plane vibrational mode in aluminum-nitride-actuated self-sensing micro-resonators for liquid monitoring purposes";
    Applied Physics Letters, 107 (2015), S. 0535061 - 0535065.

  431. Autor/innen: A. Kukovecz; Christian Kramberger; M. Holzinger; Hans Kuzmany; Johannes Schalko, E366 - MNS; M. Mannsberger; A. Hirsch

    A. Kukovecz, C. Kramberger, M. Holzinger, H. Kuzmany, J. Schalko, M. Mannsberger, A. Hirsch:
    "On the Stacking Behavior of Functionalized single-Wall Carbon Nanotubes";
    Journal of Physical Chemistry B, 106 (2002), S. 6374 - 6380.

  432. Autor/innen: Stephan Kulka, E164 - UPA; Nina Kaun, E164 - UPA; Josefa Baena; Johannes Frank, E164 - AC; Peter Svasek, E366 - MNS; David Moss; Michael J. Vellekoop, E366 - MNS; Bernhard Lendl, E164 - UPA

    S. Kulka, N. Kaun, J Baena, J. Frank, P. Svasek, D Moss, M. Vellekoop, B. Lendl:
    "IR synchrotron radiation for molecular specific detection in micro-chip based analysis systems";
    Analytical and Bioanalytical Chemistry, 387 (2004), S. 1735 - 1740.

    Zusätzliche Informationen

  433. Autor/innen: A. Kulygin, Saarland University; Christian Kirsch, Saarland University; Patrick Schwarz, Saarland University; Ulrich Schmid, E366 - MST; Helmut Seidel, UNI Saarland, LMM

    A. Kulygin, Ch. Kirsch, P. Schwarz, U. Schmid, H. Seidel:
    "Decoupled Surface Micromachined Gyroscope With Single-Point Suspension";
    Journal Of Microelectromechanical Systems, 21 (2012), 1; S. 206 - 216.

    Zusätzliche Informationen

  434. Autor/innen: Jochen Kuntner, E366 - MNS; Rupert Chabicovsky, E366 - MNS; Bernhard Jakoby, E366 - MNS

    J. Kuntner, R. Chabicovsky, B. Jakoby:
    "Sensing the thermal conductivity of deteriorated mineral oils using a hot-film microsensor";
    Sensors XXXX, 123-124 (2005), S. 397 - 402.

  435. Autor/innen: Jochen Kuntner, E366 - MNS; Rupert Chabicovsky, E366 - MNS; Franz Kohl, Acad. of Sciences; Bernhard Jakoby, E366 - MNS

    J. Kuntner, R. Chabicovsky, F. Kohl, B. Jakoby:
    "Applicability of Thermal Conductivity Sensing for Condition Monitoring";
    Geophysical Research Abstracts (GRA), 7 (2005), 11087.

  436. Autor/innen: Jochen Kuntner, E366 - MNS; Günther Stangl, E366 - MNS; Bernhard Jakoby, E366 - MNS

    J. Kuntner, G. Stangl, B. Jakoby:
    "Characterizing the Rheological Behavior of Oil-Based Liquids: Microacoustic Sensors Versus Rotational Viscometers";
    IEEE Sensors Journal, 5 (2005), 5; S. 850 - 856.

  437. Autor/innen: Maksymilian Kurek; Matthias Carnoy; Peter Emil Larsen, TU Denmark; Line H. Nielsen; Ole Hansen; Thomas Rades; Silvan Schmid, E366 - MNS; Anja Boisen, TU Denmark

    M. Kurek, M. Carnoy, P. Larsen, L.H. Nielsen, O. Hansen, T. Rades, S. Schmid, A. Boisen:
    "Nanomechanical Infrared Spectroscopy with Vibrating Filters for Pharmaceutical Analysis";
    Angewandte Chemie - International Edition, 56 (2017), 14; S. 3901 - 3905.

    Zusätzliche Informationen

  438. Autor/innen: Maksymilian Kurek; Frederik K. Larsen; Peter Emil Larsen, TU Denmark; Silvan Schmid, E366 - MNS; Anja Boisen, TU Denmark; Stephan Sylvest Keller

    M. Kurek, F. Larsen, P. Larsen, S. Schmid, A. Boisen, S. Keller:
    "Nanomechanical Pyrolytic Carbon Resonators : Novel Fabrication Method and Characterization of Mechanical Properties";
    Sensors, 16 (2016), 1097; S. 1 - 11.

    Zusätzliche Informationen

  439. Autor/innen: Samuel Kvasnica, E366 - MNS; P. Adamek; P. Spatenka

    S. Kvasnica, P. Adamek, P. Spatenka:
    "Imaging of Unbalanced Magnetron DC Discharge";
    IEEE Transactions on Plasma Science, 33 (2005), 2; S. 364 - 365.

  440. Autor/innen: Samuel Kvasnica, E366 - MNS; Johannes Schalko, E366 - MNS; Christoph Eisenmenger-Sittner, E138; Johannes Bernardi, E057B; G. Vorlaufer; A. Pauschitz; Maish Roy

    S. Kvasnica, J. Schalko, C. Eisenmenger-Sittner, J. Bernardi, G. Vorlaufer, A. Pauschitz, M. Roy:
    "Nanotribological study of PECVD DLC and reactively sputtered Ti containing carbon films";
    Diamond and Related Materials, 15 (2006), S. 1743 - 1752.

  441. Autor/innen: Gregor Langer, AT&S; Markus Leitgeb, AT & S; Johann Nicolics, E366 - AEM; Michael Unger, E366 - AEM; H. Hoschopf, Tridonic-Jennersdorf; F.-P. Wenzl, Joanneum-Weiz

    G. Langer, M. Leitgeb, J. Nicolics, M. Unger, H. Hoschopf, F. Wenzl:
    "Advanced Thermal Management Solutions on PCBs for High-Power Applications";
    SMT Magazine, 6 (2014), S. 12 - 32.

  442. Autor/innen: G. Langer; Johann Nicolics, E366 - AEM

    G. Langer, J. Nicolics:
    "Thermische Analysen von Multilayer-Leiterplatten mit integrierten optischen Verbindungen";
    Produktion von Leiterplatten und Systemen, 9 (2007), 11; S. 2243 - 2250.

  443. Autor/innen: Tom Larsen, TU Denmark; Silvan Schmid, E366 - MNS; S. Dohn, TU Denmark; J. E. Sader, Uni Melbourne; Anja Boisen, TU Denmark; Luis Guillermo Villanueva

    T. Larsen, S. Schmid, S. Dohn, J. E. Sader, A. Boisen, L. Villanueva:
    "Position and mode dependent optical detection back-action in cantilever beam resonators";
    Journal of Micromechanics and Microengineering, 27 (2017), S. 3500601 - 3500605.

    Zusätzliche Informationen

  444. Autor/innen: Frederic Laugere; Rosanne Guijt; J. Bastemeijer; G. Van der Steen; Axel Berthold; Erik Baltussen; P. M. Sarro; Gijs W. K. Van Dedem; Michael J. Vellekoop, E366 - MNS; A. Bossche

    F. Laugere, R. Guijt, J. Bastemeijer, G. Van der Steen, A. Berthold, E. Baltussen, P. Sarro, G.W.K. Van Dedem, M. Vellekoop, A. Bossche:
    "On-Chip Contactless Four-Electrode Conductivity Detection for Capillary Electrophoresis Devices";
    Analytical Chemistry, 75 (2003), 2; S. 306 - 312.

  445. Autor/innen: Frederic Laugere; G. Wijnand Lubking; J. Bastemeijer; Michael J. Vellekoop, E366 - MNS

    F. Laugere, G.W. Lubking, J. Bastemeijer, M. Vellekoop:
    "Design of an electronic interface for capacitively coupled four-electrode conductivity detection in capillary electrophoresis microchip";
    Sensors and Actuators B: Chemical, 83 (2002), S. 104 - 108.

  446. Autor/innen: Stefan Laumann, E138; Robin Jisa, ACēT; Georg Deinhofer, ACēT; Friedrich Franek, E366 - MST

    St. Laumann, R. Jisa, G. Deinhofer, F. Franek:
    "Tribological properties of brass materials and their application for cages in rolling bearings";
    Tribology - Materials, Surfaces & Interfaces, 8 (2014), 1; S. 35 - 40.

    Zusätzliche Informationen

  447. Autor/innen: Gernot Lechner, E376; Karl Fürst, E376; Peter Skiczuk, E366; Manfred Weihs, E384

    G. Lechner, K. Fürst, P. Skiczuk, M. Weihs:
    "Industrielle Bildverarbeitung unter Einsatz von IEEE 1394";
    Elektrotechnik und Informationstechnik (e&i), 118 (2001), 11; S. 583 - 589.

  448. Autor/innen: S. J. Lee; Yevgen Melikhov; D.C. Jiles; C. M. Park; Hans Hauser, E366 - AEM

    S. J. Lee, Y. Melikhov, D. Jiles, C. Park, H. Hauser:
    "Magneto-optic linear-displacement sensor with high spatial resolution and low noise";
    Journal of Applied Physics, 99 (2006), 08B301; S. 08B301-1 - 08B301-3.

  449. Autor/innen: S. J. Lee; Yevgen Melikhov; C. M. Park; Hans Hauser, E366 - AEM; D.C. Jiles

    S. J. Lee, Y. Melikhov, C. Park, H. Hauser, D. Jiles:
    "Analysis of a Remote Magneto-Optic Linear Displacement Sensor Using a Jones Matrix Approach";
    IEEE Transactions on Magnetics, 42 (2006), 10; S. 3273 - 3275.

  450. Autor/innen: S. J. Lee; S. H. Song; D.C. Jiles; Hans Hauser, E366 - AEM

    S. J. Lee, S. H. Song, D. Jiles, H. Hauser:
    "Magnetooptic Sensor for Remote Evaluation of Surfaces";
    IEEE Transactions on Magnetics, 41 (2005), 7; S. 2257 - 2259.

  451. Autor/innen: Markus Leitgeb, E366 - MST; Andreas Backes, E366 - MST; Christopher Zellner; Michael Schneider, E366 - MST; Ulrich Schmid, E366 - MST

    M. Leitgeb, A. Backes, Ch. Zellner, M. Schneider, U. Schmid:
    "Communication-The Role of the Metal-Semiconductor Junction in Pt-Assisted Photochemical Etching of Silicon Carbide";
    ECS Journal Of Solid State Science And Technology, 5 (2016), 3; S. 148 - 150.

    Zusätzliche Informationen

  452. Autor/innen: Markus Leitgeb, E366 - MST; Christopher Zellner; Michael Schneider, E366 - MST; Ulrich Schmid, E366 - MST

    M. Leitgeb, Ch. Zellner, M. Schneider, U. Schmid:
    "A Combination of Metal Assisted Photochemical and Photoelectrochemical Etching for Tailored Porosification of 4H SiC Substrates";
    ECS Journal Of Solid State Science And Technology, 5 (2016), 10; S. 556 - 564.

    Zusätzliche Informationen

  453. Autor/innen: Bodong Li; Nedine Pelin M.H. Salem; Ioanna Giouroudi, E366 - MNS; Jürgen Kosel, E354

    B. Li, M.H. Salem, I. Giouroudi, J. Kosel:
    "Integration of thin film giant magnetoimpedance sensor and surface acoustic wave transponder";
    Journal of Applied Physics, 111 (2012), 07E514; S. 07E514-1 - 07E514-3.

  454. Autor/innen: Fuquan Li; Ioanna Giouroudi, E366 - MNS; Jürgen Kosel, E354

    F. Li, I. Giouroudi, J. Kosel:
    "A biodetection method using magnetic particles and micro traps";
    Journal of Applied Physics, 111 (2012), 07B328; S. 07B328-1 - 07B328-3.

  455. Autor/innen: Sigrid Lüftl, E308 - S; Bruno Balluch, E366 - AEM; Walter Smetana, E366 - AEM; Sabine Seidler, E308 - S

    S. Lüftl, B. Balluch, W. Smetana, S. Seidler:
    "Kinetic study of the polymeric binder burnout in green low temperture co-fired ceramic tapes";
    Journal of Thermal Analysis and Calorimetry, 103 (2011), 1; S. 157 - 162.

    Zusätzliche Informationen

  456. Autor/innen: Alois Lugstein, E362; Mario Mijic; Thomas Burchhart, E362; Clemens Zeiner, E362; Rupert Langegger, E362; Michael Schneider, E366 - MST; Ulrich Schmid, E366 - MST; Emmerich Bertagnolli, E362

    A. Lugstein, M. Mijic, T. Burchhart, C. Zeiner, R. Langegger, M. Schneider, U. Schmid, E. Bertagnolli:
    "In situ monitoring of Joule heating effects in germanium nanowires by -Raman spectroscopy";
    Nanotechnology, 24 (2013), S. 1 - 5.

  457. Autor/innen: Niklas Luhmann, E366 - MNS; Artur Jachimowicz, E366 - MNS; Johannes Schalko, E366 - MNS; Pedram Sadeghi, E366 - MNS; Markus Sauer, E057E; Annette Foelske-Schmitz, E057E; Silvan Schmid, E366 - MNS

    N. Luhmann, A. Jachimowicz, J. Schalko, P. Sadeghi, M. Sauer, A. Foelske-Schmitz, S. Schmid:
    "Effect of oxygen plasma on nanomechanical silicon nitride resonators";
    Applied Physics Letters, 111 (2017), 6; S. 63103.

    Zusätzliche Informationen

  458. Autor/innen: Teresa Makaruk, E134; Tina R. Matin, Univ.Kebangsaan; Salmah B. Karman, Univ.Kebangsaan; S. Zaleha M. Diah, Univ.Kebangsaan; Benyamin Davaji, Univ.Kebangsaan; Mark O. Macqueen, Aramis Technologies; Jeanette Mueller, trustroom; Ulrich Schmid, E366 - MST; I.C. Gebeshuber, E134 - E134-1

    T. Makaruk, T. Matin, S. Karman, S. Diah, B. Davaji, M. Macqueen, J. Mueller, U. Schmid, I. Gebeshuber:
    "Biomimetic MEMS to assist, enhance and expand human sensory perceptions - A survey on state-of-the art developments";
    Proceedings of SPIE, 8066 (2011), S. 80661O1 - 80661O15.

    Zusätzliche Informationen

  459. Autor/innen: Mirjana Maksimovic, Uni-Sarajevo; Goran Stojanovic, Univ. Novi Sad; Milan Radovanovic, CoAutor - E366-MST; Mirjana Malesev, Uni-Novi Sad; Vlastimir Radonjanin, Uni-Novi Sad; Goran Radosavljevic, E366 - AEM; Walter Smetana, E366 - AEM

    M. Maksimovic, G. Stojanovic, M. Radovanovic, M. Malesev, V. Radonjanin, G. Radosavljevic, W. Smetana:
    "Application of a LTCC sensor for measuring moisture content of building materials";
    Construction and Building Materials, 26 (2012), S. 327 - 333.

  460. Autor/innen: M. Mannsberger; A. Kukovecz; A Georgakilas; Justyna Rechthaler, E164 - IAC; Johannes Schalko, E366 - MNS; Florian Hasi; Günter Allmaier, E164 - IAC; Maurizio Prato; Hans Kuzmany

    M. Mannsberger, A. Kukovecz, A. Georgakilas, J. Rechthaler, J. Schalko, F. Hasi, G. Allmaier, M. Prato, H. Kuzmany:
    "Thermal Stripping of Supramolecular Strutures: C60 Nanorods";
    Journal of Nanoscience and Nanotechnology, 5 (2005), 2; S. 198 - 203.

  461. Autor/innen: T. Manzaneque; J. Hernando-Garcia; A. Ababneh, Yarmouk University; Patrick Schwarz, Saarland University; Helmut Seidel, UNI Saarland, LMM; Ulrich Schmid, E366 - MST; Jose Luis Sànchez-Rojas

    T. Manzaneque, J. Hernando-Garcia, A. Ababneh, P. Schwarz, H. Seidel, U. Schmid, J.L. Sànchez-Rojas:
    "Quality-factor amplification in piezoelectric MEMS resonators applying an all-electrical feedback loop";
    Journal of Micromechanics and Microengineering, 21 (2011), S. 1 - 9.

    Zusätzliche Informationen

  462. Autor/innen: T. Manzaneque; J. Hernando-Garcia; A. Ababneh, Yarmouk University; Helmut Seidel, UNI Saarland, LMM; Ü. Sökmen; E. Peiner; Ulrich Schmid, E366 - MST; Jose Luis Sànchez-Rojas

    T. Manzaneque, J. Hernando-Garcia, A. Ababneh, H. Seidel, Ü. Sökmen, E. Peiner, U. Schmid, J.L. Sànchez-Rojas:
    "Quality factor enhancement in AlN-actuated MEMS by velocity feedback loop";
    Procedia Engineering, 5 (2010), S. 1494 - 1497.

    Zusätzliche Informationen

  463. Autor/innen: T. Manzaneque; J. Hernando-Garcia; L. Rodríguez-Aragón; A. Ababneh, Yarmouk University; Helmut Seidel, UNI Saarland, LMM; Ulrich Schmid, E366 - MST; Jose Luis Sànchez-Rojas

    T. Manzaneque, J. Hernando-Garcia, L. Rodríguez-Aragón, A. Ababneh, H. Seidel, U. Schmid, J.L. Sànchez-Rojas:
    "Analysis of the quality factor of AlN-actuated micro-resonators in air and liquid";
    Microsystem Technologies - Micro- and Nanosystems - Information Storage and Processing Systems, 16 (2010), 5; S. 837 - 845.

    Zusätzliche Informationen

  464. Autor/innen: T. Manzaneque; V. Ruiz-Díez; J. Hernando-Garcia; A. Ababneh, Yarmouk University; A.N. Al-Omari; Martin Kucera, E366 - MST; Achim Bittner, E366 - MST; Ulrich Schmid, E366 - MST; Helmut Seidel, UNI Saarland, LMM; Jose Luis Sànchez-Rojas

    T. Manzaneque, V Ruiz-Díez, J. Hernando-Garcia, A. Ababneh, A. Al-Omari, M. Kucera, A. Bittner, U. Schmid, H. Seidel, J.L. Sànchez-Rojas:
    "Piezoelectric in‑plane microplate resonators based on contour and flexure‑actuated modes";
    Microsystem Technologies - Micro- and Nanosystems - Information Storage and Processing Systems, 20 (2014), S. 691 - 699.

    Zusätzliche Informationen

  465. Autor/innen: T. Manzaneque; V. Ruiz-Díez; J. Hernando-Garcia; Elisabeth Wistrela, E366 - MST; Martin Kucera, E366 - MST; Ulrich Schmid, E366 - MST; Jose Luis Sànchez-Rojas

    T. Manzaneque, V Ruiz-Díez, J. Hernando-Garcia, E Wistrela, M. Kucera, U. Schmid, J.L. Sànchez-Rojas:
    "Piezoelectric MEMS resonator-based oscillator for density and viscosity sensing";
    Sensors and Actuators A: Physical, 220 (2014), S. 305 - 315.

    Zusätzliche Informationen

  466. Autor/innen: M.T. Manzuri-Shalmani; Alireza R. Baghai-Wadji, E366 - AEM

    M.T. Manzuri-Shalmani, A.R. Baghai-Wadji:
    "Elemental Field Distributions in Corrugated Structures with Large-amplitude Gratings";
    Electronics Letters, 39 (2003), 23; S. 1690 - 1691.

  467. Autor/innen: A. Maric, Uni Novi Sad, Serbia; N. Blaz; Mirjana Damnjanovic, Univ. Novi Sad; Goran Radosavljevic, E366 - AEM; Lj. Zivanov

    A. Maric, N. Blaz, M. Damnjanovic, G. Radosavljevic, L. Zivanov:
    "Capacitance Dependence of Interdigital Capacitor on Amount and Type of Applied Liquid";
    Key Engineering Materials, 543 (2013), S. 223 - 226.

  468. Autor/innen: A. Maric, Uni Novi Sad, Serbia; N. V. Blaz, Univ. Novi Sad; Ljiljana Zivanov, CoAutor - E366-MST; Goran Radosavljevic, E366 - AEM

    A. Maric, N. V. Blaz, L. Zivanov, G. Radosavljevic:
    "Fine Tuning of 3D LTCC Inductor Properties Using Combination of Different Ferrite and Dielectric Tapes";
    International Journal of Applied Ceramic Technology, 1 (2014), S. 1 - 11.

  469. Autor/innen: A. Maric, Uni Novi Sad, Serbia; Goran Radosavljevic, E366 - AEM; Walter Smetana, E366 - AEM; Ljiljana Zivanov, CoAutor - E366-MST

    A. Maric, G. Radosavljevic, W. Smetana, L. Zivanov:
    "Comparison of LTCC inductors on different substrate configurations with PCB inductor";
    Microelectronics International, 31 (2014), 1; S. 32 - 41.

  470. Autor/innen: Petko Mashkov; Berkant Gyoch; Stanislav Penchev; Hristo Beloev; Johann Nicolics, E366 - AEM

    P. Mashkov, B. Gyoch, S. Penchev, H. Beloev, J. Nicolics:
    "Equipment and Method for Power LEDs' Thermal Loading Testing During Operation";
    PLUS - Produktion von Leiterplatten und Systemen. Fachzeitschrift für Aufbau- und Verbindungstechnik in der Elektronik, 14 (2012), 12; S. 2738 - 2742.

  471. Autor/in: Jovan Matovic, E366 - MST

    J. Matovic:
    "Application of Ni electroplating techniques towards stress-free microelectromechanical system based sensors and actuators";
    Proceedings of the Institution of Mechanical Engineers Part C - Journal of Mechanical Engineering Science, 220 - Special Issue Paper (2006), S. 1 - 11.

  472. Autor/innen: Jovan Matovic, E366 - MST; Nadja Adamovic, E366 - MST; Zoran Jaksic; Ulrich Schmid, E366 - MST

    J. Matovic, N. Adamovic, Z. Jaksic, U. Schmid:
    "Field effect transistor based on protons as charge carriers";
    Procedia Engineering, 5 (2010), S. 1368 - 1371.

    Zusätzliche Informationen

  473. Autor/innen: Jovan Matovic, E366 - MST; Nadja Adamovic, E366 - MST; F. Radovanovic, E163; Zoran Jaksic; Ulrich Schmid, E366 - MST

    J. Matovic, N. Adamovic, F. Radovanovic, Z. Jaksic, U. Schmid:
    "Field effect transistor based on ions as charge carriers";
    Sensors and Actuators B: Chemical, 170 (2012), S. 137 - 142.

    Zusätzliche Informationen

  474. Autor/innen: Jovan Matovic, E366 - MST; Zoran Jaksic

    J. Matovic, Z. Jaksic:
    "A comparative analyze of fundamental noise in cantilever sensors based on lateral and longitudinal displacement: case of thermal infrared detectors";
    Microsystem Technologies - Micro- and Nanosystems - Information Storage and Processing Systems, 16 (2010), S. 755 - 763.

    Zusätzliche Informationen

  475. Autor/innen: Jovan Matovic, E366 - MST; Zoran Jaksic

    J. Matovic, Z. Jaksic:
    "Simple and reliable technology for manufacturing metal-composite nanomembranes with giant aspect ratio";
    Microelectronic Engineering, 86 (2009), 4-6; S. 906 - 909.

    Zusätzliche Informationen

  476. Autor/innen: Jovan Matovic, E366 - MST; Zoran Jaksic

    J. Matovic, Z. Jaksic:
    "Three-dimensional surface sculpting of freestanding metal-composite nanomembranes";
    Microelectronic Engineering, 87 (2010), S. 1487 - 1490.

    Zusätzliche Informationen

  477. Autor/innen: Jovan Matovic, E366 - MST; K. Reichenberger, Magna Steyr

    J. Matovic, K. Reichenberger:
    "Two - way SMA actuators for space application: performances and reliability";
    Procedia Engineering, 5 (2010), S. 1372 - 1375.

    Zusätzliche Informationen

  478. Autor/innen: Andreas Matzner; Gerhard Abraham; Markus Hornof, HTL Mödling; Thomas Klima, HTL Mödling; M. Lech, HTL-Mödling; G. Novak, HTL-Mödling; Friedrich Franek, E366 - MST

    A. Matzner, G. Abraham, M. Hornof, Th. Klima, M. Lech, G. Novak, F. Franek:
    "Miniaturisiertes taktiles Tribometer";
    Tribologie und Schmierungstechnik (eingeladen), 56 (2009), 3; S. 39 - 43.

    Zusätzliche Informationen

  479. Autor/innen: Patrick Mayrhofer, E366 - MST; Christoph Eisenmenger-Sittner, E138; Holger Euchner, E308 - GrMayrh; Achim Bittner, E366 - MST; Ulrich Schmid, E366 - MST

    P.M. Mayrhofer, C. Eisenmenger-Sittner, H. Euchner, A. Bittner, U. Schmid:
    "Influence of c-axis orientation and scandium concentration on infrared active modes of magnetron sputtered ScxAl1-xN thin films";
    Applied Physics Letters, 103 (2013).

    Zusätzliche Informationen

  480. Autor/innen: Patrick Mayrhofer, E366 - MST; Christoph Eisenmenger-Sittner, E138; Michael Stöger-Pollach, E057B; Holger Euchner, E308 - GrMayrh; Achim Bittner, E366 - MST; Ulrich Schmid, E366 - MST

    P.M. Mayrhofer, C. Eisenmenger-Sittner, M. Stöger-Pollach, H. Euchner, A. Bittner, U. Schmid:
    "The impact of argon admixture on the c-axis oriented growth of direct current magnetron sputtered ScxAl1xN thin films";
    Journal of Applied Physics, 115 (2014), 19; 193505; S. 1 - 9.

    Zusätzliche Informationen

  481. Autor/innen: Patrick Mayrhofer, E366 - MST; Holger Euchner, E308 - GrMayrh; Achim Bittner, E366 - MST; Ulrich Schmid, E366 - MST

    P.M. Mayrhofer, H. Euchner, A. Bittner, U. Schmid:
    "Circular test structure for the determination of piezoelectric constants of ScxAl1−xN thin films applying Laser Doppler Vibrometry and FEM simulations";
    Sensors and Actuators A: Physical, 222 (2015), S. 301 - 308.

    Zusätzliche Informationen

  482. Autor/innen: Patrick Mayrhofer, E366 - MST; P. O. A. Persson; Achim Bittner, E366 - MST; Ulrich Schmid, E366 - MST

    P.M. Mayrhofer, P. Persson, A. Bittner, U. Schmid:
    "Properties of ScxAl1‑xN (x = 0.27) thin films on sapphire and silicon substrates upon high temperature loading";
    Microsystem Technology - Online, 22 (2016), S. 1679 - 1689.

    Zusätzliche Informationen

  483. Autor/innen: Patrick Mayrhofer, E366 - MST; Christopher Rehlendt; Martin Fischeneder, E366 - MST; Martin Kucera; Elisabeth Wistrela, E366 - MST; Achim Bittner; Ulrich Schmid, E366 - MST

    P.M. Mayrhofer, C. Rehlendt, M. Fischeneder, M. Kucera, E Wistrela, A. Bittner, U. Schmid:
    "ScAlN MEMS Cantilevers for Vibrational Energy Harvesting Purposes";
    Journal Of Microelectromechanical Systems, Vol. 26 (2017), 1; S. 102 - 112.

    Zusätzliche Informationen

  484. Autor/innen: Patrick Mayrhofer, E366 - MST; Helmut Riedl, E308 - GrMayrh; Holger Euchner, E308 - GrMayrh; Michael Stöger-Pollach, E057B; Paul Heinz Mayrhofer, E308 - GrMayrh; Achim Bittner, E366 - MST; Ulrich Schmid, E366 - MST

    P.M. Mayrhofer, H. Riedl, H. Euchner, M. Stöger-Pollach, P.H. Mayrhofer, A. Bittner, U. Schmid:
    "Microstructure and piezoelectric response of YxAl1−xN thin films";
    Acta Materialia, 100 (2015), S. 81 - 89.

    Zusätzliche Informationen

  485. Autor/innen: Goran Miskovic, E366 - AEM; Obrad S. Aleksic, Uni Belgrade; Maria Vesna Nikolic, Uni Belgrade; Johann Nicolics, E366 - AEM; Goran Radosavljevic, E366 - AEM; Zorka Z. Vasiljevic, Serbia Acad Science; Miloljub D. Lukovic, Uni Belgrade; Walter Smetana, E366 - AEM

    G. Miskovic, O. S. Aleksic, M. V. Nikolic, J. Nicolics, G. Radosavljevic, Z. Z. Vasiljevic, M. D. Lukovic, W. Smetana:
    "Nanostructured SnO2 thick films for gas sensor application: analysis of structural and electronic properties";
    IOP Conference Series: Materials Science and Engineering, 108 (2016), 6 S.

    Zusätzliche Informationen

  486. Autor/innen: Goran Miskovic, E366 - AEM; Sasa Toskov, E366 - AEM; A. Maric, Uni Novi Sad, Serbia; N. Blaz; Goran Radosavljevic, E366 - AEM

    G. Miskovic, S. Toskov, A. Maric, N. Blaz, G. Radosavljevic:
    "Characterization of LTCC Tapes in Water Presence";
    Advanced Materials Research - Print/CD, 685 (2013), S. 307 - 311.

  487. Autor/innen: Nicola Moscelli, E366 - MNS; V. Malvaioli; F. Iuliano; Michael J. Vellekoop, E366 - MNS

    N. Moscelli, V. Malvaioli, F. Iuliano, M. Vellekoop:
    "A microfluidic system for full hydrodynamic focusing control";
    Procedia Engineering, 25 (2011), S. 803 - 806.

  488. Autor/innen: Nicola Moscelli, E366 - MNS; Sander Van den Driesche, E366 - MNS; W. Witarski; F. Iluilano; Michael J. Vellekoop, E366 - MNS

    N. Moscelli, S. Van den Driesche, W. Witarski, F. Iluilano, M. Vellekoop:
    "A real-time monitoring system for adherently grown cells";
    Procedia Engineering, 5 (2010), S. 492 - 495.

  489. Autor/innen: Nicola Moscelli, E366 - MNS; Sander Van den Driesche, E366 - MNS; W. Witarski; Silvia Pastorekova, Slov.Acad.Wiss.; Michael J. Vellekoop, E366 - MNS

    N. Moscelli, S. Van den Driesche, W. Witarski, S. Pastorekova, M. Vellekoop:
    "An imaging system for real-time monitoring of adherently grown cells";
    Sensors XXXX, 172 (2011), 1; S. 175 - 180.

  490. Autor/innen: Nicola Moscelli, E366 - MNS; W. Witarski; Sander Van den Driesche, E366 - MNS; Michael J. Vellekoop, E366 - MNS

    N. Moscelli, W. Witarski, S. Van den Driesche, M. Vellekoop:
    "In incubator live cell imaging platform";
    SPIE - Smart Sensors, Actuators, and MEMS, 8066 (2011), 7 S.

  491. Autor/innen: Isabella Moser; G. Jobst; Peter Svasek, E366 - MNS; Mohammad Mehdi Varahram, E366 - MNS; Gerald Urban

    I. Moser, G. Jobst, P. Svasek, M. Varahram, G. Urban:
    "Rapid liver enzyme assay with miniaturized liquid handling system comprising thin film biosensor array";
    Sensors and Actuators B: Chemical, 44 (1997), S. 377 - 380.

  492. Autor/innen: Alexander C. Mrkvicka; Gabriele Pfundner; Peter Pfundner, E366

    A.C. Mrkvicka, G. Pfundner, P. Pfundner:
    "Zweimal ausgestorben - Die gescheiterte Wiederansiedlung des Dickwurzel-Löffelkrauts (Cochlearia macrorrhiza) im Naturdenkmal Brunnlust (Moosbrunn, Niederösterreich)";
    Biodiversität und Naturschutz in Ostösterreich - BCBEA, 1/2 (2015), S. 252 - 261.

  493. Autor/innen: Martin Mündlein, E366 - AEM; Johann Nicolics, E366 - AEM

    M. Mündlein, J. Nicolics:
    "Modeling of Particle Arrangement in an Isotropically Conductive Adhesive Joint";
    IEEE Trans. on components and packaging technologies, 28 (2005), 4; S. 765 - 770.

  494. Autor/innen: Martin Mündlein; Bernhard Valentin, E366 - MNS; Rupert Chabicovsky, E366 - MNS; Johann Nicolics, E366 - AEM; J. Weremczuk, Warsaw Univ of Techn; G. Tarapata, Warsaw Uni of Techn; R. Jachowicz, Warsaw Uni of Techn

    M. Mündlein, B. Valentin, R. Chabicovsky, J. Nicolics, J. Weremczuk, G. Tarapata, R. Jachowicz:
    "Comparison of transepidermal water loss (TEWL) measurements with two novel sensors based on different sensing principles";
    Sensors XXXX, 142 (2008), S. 67 - 72.

  495. Autor/innen: Ioana Adina Neacșu, ACēT research GmbH; Bernhard Scheichl, E322; G. Vorlaufer, E134; Stefan Eder, E138; Friedrich Franek, E366 - MST; Lutz Ramonat

    I. A. Neacșu, B. Scheichl, G. Vorlaufer, St. Eder, F. Franek, L. Ramonat:
    "Experimental validation of the simulated steady-state behaviour of porous journal bearings";
    Journal of Tribology - ASME, 138 (2016), 3; S. 031703.

  496. Autor/innen: W. Nemitz; F.-P. Wenzl, Joanneum-Weiz; S. Schweitzer; C. Sommer, Joanneum-Weiz; Paul Hartmann, Joanneum-Weiz; Paul L. Fulmek, E366 - AEM; Johann Nicolics, E366 - AEM

    W. Nemitz, F. Wenzl, S. Schweitzer, C. Sommer, P. Hartmann, P. Fulmek, J. Nicolics:
    "Iterative Optical and Thermal Simulation Method for Proper Simulation of PC LEDs";
    LED Professional Review, 52 (2015), S. 48 - 53.

  497. Autor/innen: W. Nemitz; F.-P. Wenzl, Joanneum-Weiz; S. Schweitzer; C. Sommer, Joanneum-Weiz; Paul Hartmann, Joanneum-Weiz; Paul L. Fulmek, E366 - AEM; Johann Nicolics, E366 - AEM

    W. Nemitz, F. Wenzl, S. Schweitzer, C. Sommer, P. Hartmann, P. Fulmek, J. Nicolics:
    "Self-Compensation Approach for Maintaining the Chromaticity Coordinates of Phosphor Converted LEDs Upon Temperature Variations";
    LED Professional Review, 1 (2014), S. 54 - 60.

  498. Autor/in: Johann Nicolics, E366 - AEM

    J. Nicolics:
    "Multifunktionale Leiterplatte";
    Produktion von Leiterplatten und Systemen, 9 (2007), 11; S. 2049.

  499. Autor/in: Johann Nicolics, E366 - AEM

    J. Nicolics:
    "Thermal Management";
    Plus, 11 (2009), 1; S. 1.

    Zusätzliche Informationen

  500. Autor/in: Johann Nicolics, E366 - AEM

    J. Nicolics:
    "Thermal Management";
    PLUS - Produktion von Leiterplatten und Systemen. Fachzeitschrift für Aufbau- und Verbindungstechnik in der Elektronik (eingeladen), 14 (2012), 10; S. 2089.

  501. Autor/innen: Johann Nicolics, E366 - AEM; Hans Hauser, E366 - AEM

    J. Nicolics, H. Hauser:
    "Laser Micromachining of Ceramics";
    Veitsch-Radex-Rundschau, 2 (2000), S. 16 - 23.

  502. Autor/innen: Johann Nicolics, E366 - AEM; Laszlo Musiejovsky, E366 - AEM; Rupert Chabicovsky, E366 - MNS

    J. Nicolics, L. Musiejovsky, R. Chabicovsky:
    "Das Laserlöten als Kontaktierungsverfahren für Mikrosensoren";
    Elektrotechnik und Informationstechnik (e&i), 115 (1998), 7/8; S. 396 - 402.

  503. Autor/innen: Johann Nicolics, E366 - AEM; Laszlo Musiejovsky, E366 - AEM; Martin Mündlein, E366 - AEM; Johannes Steurer, E366; Ioanna Giouroudi, E366 - MST; Hans Hauser, E366 - AEM; Johann Zehetner, FH Vorarlberg

    J. Nicolics, L. Musiejovsky, M. Mündlein, J. Steurer, I. Giouroudi, H. Hauser, J. Zehetner:
    "Laser Welding Process Optimization for the Production of GMI Magnetic Field Sensors";
    Sensor Letters, 5 (2007), 1; S. 204 - 206.

  504. Autor/innen: Johann Nicolics, E366 - AEM; Laszlo Musiejovsky, E366 - AEM; Dieter Schrottmayer, E366 - AEM

    J. Nicolics, L. Musiejovsky, H. Schrottmayer:
    "A New Characterization of Wettability. Part I: Modeling of Dynamic Wetting Processes";
    Joining in Electronics and Precision Mechanics, 8 (1996), 1; S. 8 - 11.

  505. Autor/innen: Johann Nicolics, E366 - AEM; Laszlo Musiejovsky, E366 - AEM; Dieter Schrottmayer, E366 - AEM; W. Ziegler

    J. Nicolics, L. Musiejovsky, H. Schrottmayer, W. Ziegler:
    "A New Characterization of Wettability. Part II: Applications as Demonstrated by Laser Soldering of SMDs";
    Joining in Electronics and Precision Mechanics, 8 (1996), 2; S. 18 - 22.

    Zusätzliche Informationen

  506. Autor/innen: Johann Nicolics, E366 - AEM; Laszlo Musiejovsky, E366 - AEM; Dieter Schrottmayer, E366 - AEM; Wolfgang Kremser, E366 - AEM

    J. Nicolics, L. Musiejovsky, H. Schrottmayer, W. Kremser:
    "Comparison of the Thermal Characteristics of Plastic and Ceramic Packages for Medical Applications";
    Transactions on Precision and Electronic Technology, 36 (1997), 3; S. 175 - 180.

  507. Autor/innen: Johann Nicolics, E366 - AEM; Laszlo Musiejovsky, E366 - AEM; Johannes Steurer, E366; Ioanna Giouroudi, E366 - MST; Hans Hauser, E366 - AEM; Martin Mündlein, E366 - AEM; S. Zoppel, FH Vorarlberg; Johann Zehetner, FH Vorarlberg

    J. Nicolics, L. Musiejovsky, J. Steurer, I. Giouroudi, H. Hauser, M. Mündlein, S. Zoppel, J. Zehetner:
    "Laser Welding Process Optimization for the Production of Giant Magnetoimpedance Magnetic Field Sensors";
    Sensor Letters, 5 (2007), 1; S. 204 - 207.

  508. Autor/innen: Johann Nicolics, E366 - AEM; Dieter Schrottmayer, E366 - AEM; Laszlo Musiejovsky, E366 - AEM

    J. Nicolics, H. Schrottmayer, L. Musiejovsky:
    "Eine neue Charakterisierung der Benetzbarkeit. Teil 1: Modellbildung für dynamische Benetzungsvorgänge";
    Verbindungstechnik in der Elektronik & Feinwerktechnik (VTE), 8 (1996), 1; S. 21 - 27.

  509. Autor/innen: Johann Nicolics, E366 - AEM; Dieter Schrottmayer, E366 - AEM; Laszlo Musiejovsky, E366 - AEM

    J. Nicolics, H. Schrottmayer, L. Musiejovsky:
    "Eine neue Charakterisierung der Benetzbarkeit. Teil 2: Anwendung am Beispiel des Laserlötens von SMDs";
    Verbindungstechnik in der Elektronik & Feinwerktechnik (VTE), 8 (1996), 2; S. 72 - 80.

    Zusätzliche Informationen

  510. Autor/innen: Jeroen H. Nieuwenhuis, E366 - MNS; J. Bastemeijer; A. Bossche; Michael J. Vellekoop, E366 - MNS

    J. Nieuwenhuis, J. Bastemeijer, A. Bossche, M. Vellekoop:
    "Near-Field Optical Sensors for Particle shape Measurements";
    IEEE Sensors Journal, 3 (2003), 5; S. 646 - 651.

  511. Autor/innen: Jeroen H. Nieuwenhuis, E366 - MNS; J. Bastemeijer; P. M. Sarro; Michael J. Vellekoop, E366 - MNS

    J. Nieuwenhuis, J. Bastemeijer, P. Sarro, M. Vellekoop:
    "Integrated flow-cells for novel adjustable sheath flows";
    Lab on a Chip, 3 (2003), S. 56 - 61.

  512. Autor/innen: Jeroen H. Nieuwenhuis, E366 - MNS; Artur Jachimowicz, E366 - MNS; Peter Svasek, E366 - MNS; Michael J. Vellekoop, E366 - MNS

    J. Nieuwenhuis, A. Jachimowicz, P. Svasek, M. Vellekoop:
    "Optimization of Microfluidic Particle Sorters Based on Dielectrophoresis";
    IEEE Sensors Journal, 5 (2005), 5; S. 810 - 816.

  513. Autor/innen: Jeroen H. Nieuwenhuis, E366 - MNS; Franz Kohl, E366 - MNS; J. Bastemeijer; Pasqualina M. Sarro; Michael J. Vellekoop, E366 - MNS

    J. Nieuwenhuis, F. Kohl, J. Bastemeijer, P. M. Sarro, M. Vellekoop:
    "Intetrated Coulter counter based on 2-dimensional liquid aperture control";
    Sensors and Actuators B: Chemical, 102 (2004), S. 44 - 50.

  514. Autor/innen: Jeroen H. Nieuwenhuis, E366 - MNS; Michael J. Vellekoop, E366 - MNS

    J. Nieuwenhuis, M. Vellekoop:
    "Simulation study of dielectrophoretic particle sorters";
    Sensors and Actuators B: Chemical, 103 (2004), S. 331 - 338.

  515. Autor/innen: Fethi Olcaytug; Hieronim Szymanowski; Mariusz Kaczmarek; Anna Sobczyk; Cezary Rapiejko; Johannes Schalko, E366 - MNS; Kurt Piplits, E164 - IAC; Maciej Gazicki-Lipman; Hirotsugu Yasuda

    F. Olcaytug, H. Szymanowski, M. Kaczmarek, A. Sobczyk, C. Rapiejko, J. Schalko, K. Piplits, M. Gazicki-Lipman, H. Yasuda:
    "Cylindric electromagnetron electrode for continuously variable PVD/CVD mixed processing";
    Polish Journal of Applied Chemistry, 49 (2005), (1-2); S. 11 - 21.

  516. Autor/innen: M. J. Oliver; J. Hernando-Garcia; A. Ababneh, Yarmouk University; Helmut Seidel, UNI Saarland, LMM; Ulrich Schmid, E366 - MST; J.P. Andrés; P. Pobedinskas; K. Haenen; Jose Luis Sànchez-Rojas

    M. Oliver, J. Hernando-Garcia, A. Ababneh, H. Seidel, U. Schmid, J. Andrés, P. Pobedinskas, K. Haenen, J.L. Sànchez-Rojas:
    "Resonantly excited AlN-based microcantilevers for immunosensing";
    Microsystem Technologies - Micro- and Nanosystems - Information Storage and Processing Systems, 18 (2012), S. 1089 - 1094.

    Zusätzliche Informationen

  517. Autor/innen: M. J. Oliver; J. Hernando-Garcia; A. Ababneh, Yarmouk University; Helmut Seidel, UNI Saarland, LMM; Ulrich Schmid, E366 - MST; J. Olivares; E. Iborra; P. Pobedinskas; K. Haenen; Jose Luis Sànchez-Rojas

    M. Oliver, J. Hernando-Garcia, A. Ababneh, H. Seidel, U. Schmid, J. Olivares, E. Iborra, P. Pobedinskas, K. Haenen, J.L. Sànchez-Rojas:
    "Resonant Piezoelectric AlN-actuated Microcantilevers For Detection Of Antigen/Antibody Interactions";
    Proceedings of SPIE, 8066 (2011), S. 1 - 8.

    Zusätzliche Informationen

  518. Autor/in: Fritz Paschke, E366

    F. Paschke:
    "Elektrotechnik - gestern, heute, morgen";
    Perspektiven, 117 (2000), 12; S. 772 - 778.

  519. Autor/in: Fritz Paschke, E366

    F. Paschke:
    "Reliable Estimates of Planetary and Solar Magnetic Fields - A Case of Abundance of Hydrogen in the Earth's Core";
    Sitzungsberichte der Österreichische Akademie der Wissenschaften, 216 (2007), S. 45 - 52.

  520. Autor/innen: Fritz Paschke, E366; Walter Ehrlich-Schupita, E389; Markus Mayer, E354

    F. Paschke, W. Ehrlich-Schupita, M. Mayer:
    "Design of a Brewster-angle broad-band waveguide window with ghost-mode suppression for the Ku-band";
    Elektrotechnik und Informationstechnik (e&i), vol. 125, issue 5 (2008), S. 197 - 201.

  521. Autor/innen: Fritz Paschke, E366; Constantin Rabong, E163 - Jordis; Christoph Schuster

    F. Paschke, C. Rabong, C. Schuster:
    "Red light as a 12-oxo-leukotriene B 4 antagonist: an explanation for the efficacy of intensive red light in the therapy of peripheral inflammatory diseases";
    Biomedical Engineering-Biomedizinische Technik, 59 (2014), 6; S. 487 - 493.

    Zusätzliche Informationen

  522. Autor/in: Andreas Pauschitz, E366 - MST

    A. Pauschitz:
    "Tribologie - was nun?";
    Austria Innovativ (eingeladen), 1 (2001), S. 8 - 9.

    Zusätzliche Informationen

  523. Autor/innen: Andreas Pauschitz, ACēT; Friedrich Franek, E366 - MST

    A. Pauschitz, F. Franek:
    "Energie- und Werkstoffeffizienz - Forschungsaktivitäten im Österreichischen Kompetenzzentrum für Tribologie";
    Berg- und Hüttenmännische Monatshefte, 5 (2008), S. 169 - 174.

    Zusätzliche Informationen

  524. Autor/innen: Andreas Pauschitz, E366 - MST; Friedrich Franek, E366 - MST

    A. Pauschitz, F. Franek:
    "Tribotechnische Betrachtung zur Endoprothetik des Hüftgelenkes";
    Österr.Z.Phys.Med.Rehabil. (eingeladen), 7. Jahrgang (1997), 1026-079X; S. 127 - 130.

  525. Autor/innen: Andreas Pauschitz, E366 - MST; Friedrich Franek, E366 - MST; Alexei Barabolia, E366 - MST

    A. Pauschitz, F. Franek, A. Barabolia:
    "Thin Surface Coatings with Nano-scale Particles - Tribological Properties for Various Conditions";
    Tribologie und Schmierungstechnik (eingeladen), 47. Jahrgang (2000), 2/2000; S. 18 - 22.

  526. Autor/innen: Andreas Pauschitz, ACēT; Manish Roy, ACēT; Friedrich Franek, E366 - MST

    A. Pauschitz, M. Roy, F. Franek:
    "Mechanisms of sliding wear of metals and alloys at elevated temperatures";
    Tribology International, 41 (2008), 7; S. 584 - 602.

    Zusätzliche Informationen

  527. Autor/innen: Andreas Pauschitz, E366 - MST; Manish Roy, E366 - MST; Friedrich Franek, E366 - MST

    A. Pauschitz, M. Roy, F. Franek:
    "On the chemical composition of the layers formed during sliding of metallic alloys at high temperature";
    Tribologia, 02 (2003), S. 127 - 143.

  528. Autor/innen: Andreas Pauschitz, E366 - MST; Johannes Schalko, E366 - MNS; Thomas Koch, E308 - S; Christoph Eisenmenger-Sittner, E138; Samuel Kvasnica, E366 - MNS; M. Roy

    A. Pauschitz, J. Schalko, T. Koch, C. Eisenmenger-Sittner, S. Kvasnica, M. Roy:
    "Nanoindentation and AFM studies of PECVD DLC and reactively sputtered Ti containing carbon films";
    Bulletin of Materials Science, 26 (2003), 6; S. 585 - 591.

    Zusätzliche Informationen

  529. Autor/innen: Johannes Rudolf Peham, AIT; Walter Grienauer; Hannes Steiner; Rudolf Heer, AIT GmbH, Wien; Michael J. Vellekoop, E366 - MNS; Christa Nöhammer, AIT; H. Wiesinger-Mayr, AIT

    J. R. Peham, W. Grienauer, H. Steiner, R. Heer, M. Vellekoop, C. Nöhammer, H. Wiesinger-Mayr:
    "Long target droplet polymerase chain reaction with a microfluidic device for high-throughput detection of pathogenic bacteria at clinical sensitivity";
    Biomed Microdevices, 13 (2011), S. 463 - 473.

  530. Autor/innen: Johannes Rudolf Peham, AIT; Michael J. Vellekoop, E366 - MNS; Christa Nöhammer, AIT; H. Wiesinger-Mayr, AIT

    J. R. Peham, M. Vellekoop, C. Nöhammer, H. Wiesinger-Mayr:
    "PCR Product Detector with LED-Photodiode Fluorescence Sensing in a Nanoliter Flow-Cell for the High-Throughput Detection of Double-Stranded DNA";
    Procedia Engineering, 25 (2011), S. 936 - 939.

  531. Autor/innen: C. Peuker, ACēT; Ewald Badisch, ACēT; Friedrich Franek, E366 - MST; W. Bartz

    C. Peuker, E. Badisch, F. Franek, W.J. Bartz:
    "Einfluss der effektiven Viskosität beim Gewindeformen";
    Tribologie und Schmierungstechnik, 1 (2012), S. 17 - 22.

    Zusätzliche Informationen

  532. Autor/innen: Georg Pfusterschmied, E366 - MST; Martin Kucera, E366 - MST; W. Steindl, E366 - MST; T. Manzaneque; V. Ruiz-Díez; Achim Bittner, E366 - MST; Michael Schneider, E366 - MST; Jose Luis Sànchez-Rojas; Ulrich Schmid, E366 - MST

    G. Pfusterschmied, M. Kucera, W. Steindl, T. Manzaneque, V Ruiz-Díez, A. Bittner, M. Schneider, J.L. Sànchez-Rojas, U. Schmid:
    "Roof tile-shaped modes in quasi free-free supported piezoelectricmicroplate resonators in high viscous fluids";
    Sensors and Actuators B: Chemical, 237 (2016), S. 999 - 1006.

    Zusätzliche Informationen

  533. Autor/innen: Georg Pfusterschmied, E366 - MST; Martin Kucera, E366 - MST; Elisabeth Wistrela, E366 - MST; T. Manzaneque; V. Ruiz-Díez; Jose Luis Sànchez-Rojas; Achim Bittner, E366 - MST; Ulrich Schmid, E366 - MST

    G. Pfusterschmied, M. Kucera, E Wistrela, T. Manzaneque, V Ruiz-Díez, J.L. Sànchez-Rojas, A. Bittner, U. Schmid:
    "Temperature dependent performance of piezoelectric MEMS resonators for viscosity and density determination of liquids";
    Journal of Micromechanics and Microengineering, 25 (2015).

    Zusätzliche Informationen

  534. Autor/innen: P. Pichler, E366; Werner Jüngling, E360; Siegfried Selberherr, E360; E. Guerrero; Hans Pötzl, E366

    P. Pichler, W. Jüngling, S. Selberherr, E. Guerrero, H. Pötzl:
    "Simulation of Critical IC-Fabrication Steps";
    IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 4 (1985), 4; S. 384 - 397.

    Zusätzliche Informationen

  535. Autor/innen: P. Pichler, E366; Werner Jüngling, E360; Siegfried Selberherr, E360; E. Guerrero; Hans Pötzl, E366

    P. Pichler, W. Jüngling, S. Selberherr, E. Guerrero, H. Pötzl:
    "Simulation of Critical IC-Fabrication Steps";
    IEEE Transactions on Electron Devices, 32 (1985), 10; S. 1940 - 1953.

    Zusätzliche Informationen

  536. Autor/innen: P. Pichler, E366; Werner Jüngling, E360; Siegfried Selberherr, E360; Hans Pötzl, E366

    P. Pichler, W. Jüngling, S. Selberherr, H. Pötzl:
    "Two-Dimensional Coupled Diffusion Modeling";
    Physica B: Condensed Matter, 129 (1985), 1-3; S. 187 - 191.

    Zusätzliche Informationen

  537. Autor/innen: K. Piglmayer; M. Boman; M. Lindstam; Rupert Chabicovsky, E366 - MNS

    K. Piglmayer, M. Boman, M. Lindstam, R. Chabicovsky:
    "Photon assisted CVD";
    Journal de Physique IV, 11 (2001), Pr3; S. 703 - 713.

  538. Autor/innen: K. Piglmayer; Rupert Chabicovsky, E366 - MNS

    K. Piglmayer, R. Chabicovsky:
    "Laser-Induced Rapid Growth of Tungsten Crystals";
    Electrochemical and Solid-State Letters, 5 (2002), 2; S. C25 - C27.

  539. Autor/innen: K. Piglmayer; H. Schieche; Rupert Chabicovsky, E366 - MNS

    K. Piglmayer, H. Schieche, R. Chabicovsky:
    "On the reaction mechanism in laser-induced deposition of tungsten microstructures from WF6/H2";
    Applied Surface Science, 2000 (2000), S. 365 - 368.

  540. Autor/innen: C. Pirghie; A. C. Pirghie; Stefan Eder, ACēT; Friedrich Franek, E366 - MST

    C. Pirghie, A. Pirghie, S. Eder, F. Franek:
    "PFPE-Z lubricant thin films in molecular dynamics simulations - shear thinning and friction law";
    Optoelectronics And Advanced Materials - Rapid Communications, Vol.7 (2013), No. 5-6; S. 434 - 438.

    Zusätzliche Informationen

  541. Autor/innen: M. M. Pochia, Uni-Novi Sad; N. Blaz; A. Maric, Uni Novi Sad, Serbia; D. Rosca, Uni-Novi Sad; Goran Radosavljevic, E366 - AEM

    M. Pochia, N. Blaz, A. Maric, D. Rosca, G. Radosavljevic:
    "Fluidic Sensor Realized in the LTCC Technology";
    Key Engineering Materials, 543 (2013), S. 435 - 438.

  542. Autor/in: Alfred Pohl, E366 - MNS

    A. Pohl:
    "A Low Cost High Definition Wireless Sensor System Utilizing Intersymbol Interference";
    IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 45 (1998), 5; S. 1355 - 1362.

  543. Autor/in: Alfred Pohl, E366 - MNS

    A. Pohl:
    "A Review of Wireless SAW Sensors";
    IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 47 (2000), 2; S. 317 - 332.

  544. Autor/innen: Alfred Pohl, E366 - MNS; Gerald Ostermayer, E366 - MNS; Franz Seifert, E366 - MNS

    A. Pohl, G. Ostermayer, F. Seifert:
    "Wireless Sensing Using Oscillator Circuits Locked to Remote High-Q SAW Resonators";
    IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 45 (1998), 5; S. 1161 - 1168.

  545. Autor/innen: Alfred Pohl, E366 - MNS; Franz Seifert, E366 - MNS

    A. Pohl, F. Seifert:
    "New Applications of Wirelessly Interrogabel Passive SAW Sensors";
    Special Issue IEEE Trans. On MTT, 46 (1998), 12; S. 2208 - 2212.

  546. Autor/innen: Alfred Pohl, E366 - MNS; Franz Seifert, E366 - MNS

    A. Pohl, F. Seifert:
    "Wirelessly Interrogable SAW Sensors for Vehicular Applications";
    IEEE Transactions on Instrumentation and Measurement Technology, 46 (1997), 4; S. 1031 - 1038.

  547. Autor/innen: Alfred Pohl, E366 - MNS; Reinhard Steindl, E366 - MNS; Leonhard Reindl

    A. Pohl, R. Steindl, L. Reindl:
    "The 'Intelligent Tire' Utilizing Passive SAW Sensors - Measurement of Tire Friction";
    IEEE Transactions on Instrumentation and Measurement Technology, 48 (1999), 6; S. 1041 - 1046.

  548. Autor/innen: Dietmar Puchberger-Enengl, E366; Christian Krutzler, ACMIT; Michael Binder; Christian Rohrer; Klaus Rudolf Schröder; Franz Keplinger, E366 - MNS; Michael J. Vellekoop, Universität Bremen

    D. Puchberger-Enengl, C. Krutzler, M. Binder, C. Rohrer, K. Schröder, F. Keplinger, M.J. Vellekoop:
    "Characterization of a Multi-parameter Sensor for Continuous Wound Assessment";
    Procedia Engineering, 47 (2012), S. 985 - 988.

  549. Autor/innen: Dietmar Puchberger-Enengl, E366; Christian Krutzler, ACMIT; Franz Keplinger, E366 - MNS; Michael J. Vellekoop, Universität Bremen

    D. Puchberger-Enengl, C. Krutzler, F. Keplinger, M.J. Vellekoop:
    "Single-step design of hydrogel-based microfluidic assays for rapid diagnostics";
    Lab on a Chip, 14 (2014), 2; S. 378 - 383.

    Zusätzliche Informationen

  550. Autor/innen: Dietmar Puchberger-Enengl, E366; Susann Podszun, IMTEK; Helene Heinz, IMTEK; Carsten Hermann, IMTEK; Paul Vulto, LACDR; Gerald Urban

    D. Puchberger-Enengl, S. Podszun, H. Heinz, C. Hermann, P. Vulto, G. Urban:
    "Microfluidic concentration of bacteria by on-chip electrophoresis";
    Biomicrofluidics, 5 (2011), 044111.

    Zusätzliche Informationen

  551. Autor/innen: Dietmar Puchberger-Enengl, E366; Sander van den Driesche, Universität Bremen; Christian Krutzler, ACMIT; Franz Keplinger, E366 - MNS; Michael J. Vellekoop, Universität Bremen

    D. Puchberger-Enengl, S. van den Driesche, C. Krutzler, F. Keplinger, M.J. Vellekoop:
    "Hydrogel-based microfluidic incubator for microorganism cultivation and analyses";
    Biomicrofluidics, 9 (2015), 014127; S. 1 - 9.

    Zusätzliche Informationen

  552. Autor/innen: Dietmar Puchberger-Enengl, E366; Michael J. Vellekoop, E366 - MNS

    D. Puchberger-Enengl, M. Vellekoop:
    "On-chip concentration of microorganisms by free flow electrophoresis";
    Procedia Engineering, 25 (2011), S. 1249 - 1252.

  553. Autor/innen: D. Pum; Günther Stangl, E366 - MNS; C. Sponer; Wolfgang Fallmann, E366 - MNS; U.B. Sleytr

    D. Pum, G. Stangl, C. Sponer, W. Fallmann, U.B. Sleytr:
    "Deep UV patterning of monolayers of crystalline S-layer protein on silicon surfaces";
    Colloids and Surface B: Biointerfaces, 8 (1997), S. 157 - 162.

  554. Autor/innen: Guillermo Quintas, E164 - UPA; Elena Nunez; Michael J. Vellekoop, E366 - MNS; Bernhard Lendl, E164 - UPA

    G. Quintas, E Nunez, M. Vellekoop, B. Lendl:
    "On-line monitoring of pH junctions in capillary electrophoresis using Fourier transform infrared spectrometry";
    Analytical and Bioanalytical Chemistry, 387 (2007), S. 287 - 292.

    Zusätzliche Informationen

  555. Autor/innen: V. Radonic; G. Radosavljevic, Uni Novi Sad, Serbia; N. V. Blaz, Univ. Novi Sad; Lj. Zivanov; Walter Smetana, E366 - AEM

    V. Radonic, G. Radosavljevic, N. V. Blaz, L. Zivanov, W. Smetana:
    "Karakterizacija dielektričnih traka za LTCC tehnologiju primenom kapacitivne metode u opsegu učestanosti od 1kHz do 1MHz";
    Hemijska industrija, 63 (2009), 3; S. 209 - 216.

  556. Autor/innen: Goran Radosavljevic, E366 - AEM; N. Blaz; A. Maric, Uni Novi Sad, Serbia; Walter Smetana, E366 - AEM; Lj. Zivanov

    G. Radosavljevic, N. Blaz, A. Maric, W. Smetana, L. Zivanov:
    "Mechanical, Electrical and Thermal Characterization of Commercially Available LTCC Dielectric Tapes";
    Key Engineering Materials, 543 (2013), S. 212 - 215.

  557. Autor/innen: G. Radosavljevic, Uni Novi Sad, Serbia; A. Marić; G. Stojanović; Walter Smetana, E366 - AEM; Michael Unger, E366 - AEM; Heinz Homolka, E366 - AEM

    G. Radosavljevic, A. Marić, G. Stojanović, W. Smetana, M. Unger, H. Homolka:
    "Application of the LTCC technology for the fabrication of the RF 3D inductor";
    Romanian Journal of Information Science and Technology, 11 (2008), 2; S. 193 - 202.

  558. Autor/innen: Goran Radosavljevic, E366 - AEM; A. Maric, Uni Novi Sad, Serbia; Michael Unger, E366 - AEM; N. Blaz; Walter Smetana, E366 - AEM; Lj. Zivanov

    G. Radosavljevic, A. Maric, M. Unger, N. Blaz, W. Smetana, L. Zivanov:
    "Electrical, mechanical and temperature characterization of commercialy available LTCC dielectric materials";
    Hemijska industrija, 67 (2013), 4; S. 621 - 628.

  559. Autor/innen: Goran Radosavljevic, E366 - AEM; M. M. Pochia, Uni-Novi Sad; D. Rosca, Uni-Novi Sad; N. Blaz; A. Maric, Uni Novi Sad, Serbia

    G. Radosavljevic, M. Pochia, D. Rosca, N. Blaz, A. Maric:
    "Capacitive Low Temperature Co-Fired Ceramic Fluidic Sensor";
    Sensor Letters, 11 (2013), 4; S. 646 - 649.

  560. Autor/innen: Goran Radosavljevic, E366 - AEM; Walter Smetana, E366 - AEM; A. Maric, Uni Novi Sad, Serbia; Lj. Zivanov

    G. Radosavljevic, W. Smetana, A. Maric, L. Zivanov:
    "Benefits of the LTCC Substrate Configuration with an Air-Gap for Realization of RF Inductor with High Q-Factor and SRF";
    International Journal of Applied Ceramic Technology (eingeladen), 1-10 (2011), S. 1 - 10.

  561. Autor/innen: G. Radosavljevic, Uni Novi Sad, Serbia; Walter Smetana, E366 - AEM; A. Maric, Uni Novi Sad, Serbia; Lj. Zivanov; Michael Unger, E366 - AEM; Günther Stangl, E366 - MNS

    G. Radosavljevic, W. Smetana, A. Maric, L. Zivanov, M. Unger, G. Stangl:
    "Parameters affecting the sensitivity of LTCC pressure sensors";
    Microelectronics International, 27 (2010), 3; S. 159 - 165.

  562. Autor/innen: G. Radosavljevic, Uni Novi Sad, Serbia; Lj. Zivanov; Walter Smetana, E366 - AEM; A. Maric, Uni Novi Sad, Serbia; Michael Unger, E366 - AEM; L. Nad, Uni Novi Sad, Serbia

    G. Radosavljevic, L. Zivanov, W. Smetana, A. Maric, M. Unger, L. Nad:
    "Wireless Embedded Resonant Pressure Sensor Fabricated in the Standard LTCC Technology";
    IEEE Sensors Journal, 9 (2009), S. 1956 - 1962.

  563. Autor/innen: Philip Radovanovic, E163 - Gruber; Michael Kellner, E163 - Gruber; Jovan Matovic, E366 - MST; Robert Liska, E163 - Gruber; Thomas Koch, E308 - S

    P. Radovanovic, M. Kellner, J. Matovic, R. Liska, T. Koch:
    "Asymmetric membranes with interpenetrating proton-conducting morphology made by a combination of immersion precipitation and photopolymerization";
    Journal of Membrane Science, 401-402 (2012), S. 254 - 261.

  564. Autor/in: Günter Randolf, E366 - AEM

    G. Randolf:
    "Konzept eines Hybridantriebes für Personenkraftwagen mit kapazitivem Energiepuffer";
    Elektrotechnik und Informationstechnik (e&i), 115 (1997), 3; S. 164 - 164.

  565. Autor/innen: E. K. Reichel, JKU Linz - Mikroelec; Christian Riesch, E366 - MNS; Franz Keplinger, E366 - MNS; Bernhard Jakoby, JKU Linz

    E. Reichel, Ch. Riesch, F. Keplinger, B. Jakoby:
    "A Novel Oscillating Shear Viscosity Sensor for Complex Liquids";
    Procedia Chemistry, 1 (2009), S. 895 - 898.

  566. Autor/innen: E. K. Reichel, JKU Linz - Mikroelec; Christian Riesch, E366 - MNS; Franz Keplinger, E366 - MNS; Bernhard Jakoby, JKU Linz

    E. Reichel, Ch. Riesch, F. Keplinger, B. Jakoby:
    "Modeling of the fluid-structure interaction in a fluidic sensor cell";
    Sensors XXXX, 156 (2009), S. 222 - 228.

  567. Autor/innen: E. K. Reichel, JKU Linz - Mikroelec; Christian Riesch, E366 - MNS; Franz Keplinger, E366 - MNS; C. Kirschhock; Bernhard Jakoby, JKU Linz

    E. Reichel, Ch. Riesch, F. Keplinger, C. Kirschhock, B. Jakoby:
    "Analysis and experimental verification of a metallic suspended plate resonator for viscosity sensing";
    Sensors XXXX, 162 (2010), S. 418 - 424.

  568. Autor/innen: E. K. Reichel, JKU Linz - Mikroelec; Christian Riesch, E366 - MNS; B. Weiss, JKU Linz - Mikroelek; Bernhard Jakoby, JKU Linz

    E. Reichel, Ch. Riesch, B. Weiss, B. Jakoby:
    "A vibrating membrance rheometer utilizing electromagnetic excitation";
    Sensors XXXX, 145-146 (2008), S. 349 - 353.

  569. Autor/innen: E. K. Reichel, JKU Linz - Mikroelec; B. Weiss, JKU Linz - Mikroelek; Bernhard Jakoby, JKU Linz; Christian Riesch, E366 - MNS; Franz Keplinger, E366 - MNS

    E. Reichel, B. Weiss, B. Jakoby, Ch. Riesch, F. Keplinger:
    "Messung physikalischer Flüssigkeitseigenschaften mit beidseitig eingespannten Balkenstrukturen";
    TM - Technisches Messen (eingeladen), 75 (2008), 2; S. 84 - 90.

  570. Autor/innen: Roland Reicher, E366 - AEM; Walter Smetana, E366 - AEM

    R. Reicher, W. Smetana:
    "Dimensionierung und Charakterisierung eines Laserleistungsdetektors in Dickschichttechnik mit Finiten Elementen";
    TM - Technisches Messen, 64 (1997), 2; S. 68 - 72.

  571. Autor/innen: Roland Reicher, E366 - AEM; Walter Smetana, E366 - AEM; Alexander Adlaßnig; Julius C. Schuster

    R. Reicher, W. Smetana, A. Adlaßnig, J. Schuster:
    "Bonding Mechanism and Stress Distribution in a Glass Frit Free Thick Film Metallization System for AlN.:";
    Journal of Materials Science, Materials in Electronics, 9 (1998), S. 429 - 434.

  572. Autor/innen: Roland Reicher, E366 - AEM; Walter Smetana, E366 - AEM; Julius C. Schuster; Alexander Adlaßnig

    R. Reicher, W. Smetana, J. Schuster, A. Adlaßnig:
    "A fritless copper conductor system for power electronic applications";
    Microelectronics Reliability, 41 (2001), S. 491 - 498.

  573. Autor/innen: Maria Reiner, Infineon Techn.; J. Schellander, Infineon Techn.; Günter Denifl, Infineon Techn.; M. Stadtmueller, Infineon Techn.; Michael Schmid, E134 - E134-5; Tobias Frischmuth, E366 - MST; Ulrich Schmid, E366 - MST; Rudolf Pietschnig, Univ. Kassel; Clemens Ostermaier, Infineon Techn.

    M. Reiner, J. Schellander, G. Denifl, M. Stadtmueller, M. Schmid, T. Frischmuth, U. Schmid, R. Pietschnig, C. Ostermaier:
    "Physical-chemical stability of fluorinated III-N surfaces: Towards the understanding of the (0001) AlxGa1-xN surface donor modification by fluorination";
    Journal of Applied Physics, 121 (2017), S. 2257041 - 2257046.

    Zusätzliche Informationen

  574. Autor/innen: G. Reinisch, E366 - MST; Friedrich Franek, E366 - MST; Kurt Judmann, E384

    G. Reinisch, F. Franek, K. Judmann et al.:
    "Differences of the Mechanical Setup of Hip Simulators and Their Consequences on the Outcome of Hip Wear Testing";
    Journal of ASTM International (JAI), 3 (2006), 8.

    Zusätzliche Informationen

  575. Autor/innen: G. Reinisch, E366 - MST; K.P. Judmann; Friedrich Bauer; Christian Lhotka

    G. Reinisch, K. Judmann, F. Bauer, C. Lhotka:
    "Tribologische Beurteilung von 17 Metall/Metall-Hüftendoprothesen";
    Biomaterialien, 2. Jahrgang, Heft 2/3 (2001), S. 99.

  576. Autor/innen: G. Reinisch, E366 - MST; K.P. Judmann; Christian Lhotka; Felix Lintner

    G. Reinisch, K. Judmann, C. Lhotka, F. Lintner:
    "Retrieval study of uncemented metal-metal hip prostheses revised for early loosening";
    Biomaterials, 24 (2003), S. 1081 - 1091.

  577. Autor/innen: G. Reinisch, E366 - MST; K.P. Judmann; Christian Lhotka; K. Zweymüller

    G. Reinisch, K. Judmann, C. Lhotka, K. Zweymüller:
    "Tribologische Untersuchungen an 22 früh-gelockerten Metall-Metall-Hüftendoprothesen";
    Zeitschrift für Orthopädie und ihre Grenzgebiete, 140 (2002), S. 15.

  578. Autor/innen: G. Reinisch, E366 - MST; Kurt Judmann, E384; Wolfgang Plitz; Joachim Schörg

    G. Reinisch, K. Judmann, W. Plitz, J. Schörg:
    "Ein neuer, der ISO/FDIS 14242-1 entsprechender Hüftsimulator: E-SIM";
    Biomedizinische Technik, 46 (2001), 12; S. 362 - 365.

  579. Autor/innen: Jörg Reitterer, E366 - MST; Franz Fidler, E389; Gerhard Schmid, E389; Christian Hambeck, E384; Ferdinand Saint Julien-Wallsee, TriLight; Walter Leeb, E389; Ulrich Schmid, E366 - MST

    J. Reitterer, F. Fidler, G. Schmid, C. Hambeck, F.S. Julien-Wallsee, W. Leeb, U. Schmid:
    "Beam-clipping-induced diffraction effects in MEMS laser scanners for autostereoscopic outdoor displays";
    Sensors and Actuators A: Physical, 233 (2015), S. 582 - 589.

    Zusätzliche Informationen

  580. Autor/innen: Jörg Reitterer, E366 - MST; Franz Fidler, E389; Gerhard Schmid, E389; Thomas Riel; Christian Hambeck; Ferdinand Saint Julien-Wallsee, TriLight; Walter Leeb, E389; Ulrich Schmid, E366 - MST

    J. Reitterer, F. Fidler, G. Schmid, T. Riel, C. Hambeck, F.S. Julien-Wallsee, W. Leeb, U. Schmid:
    "Design and evaluation of a large-scale autostereoscopic multi-view laser display for outdoor applications";
    Optics Express, 22 (2014), 22.

    Zusätzliche Informationen

  581. Autor/innen: W. Riedler, Inst.f. Weltraumfor; K. Torkar, Inst.f.Weltraumforsc; H. Jeszenszky, Inst.f.Weltraumforsc; Günther Stangl, E366 - MNS

    W. Riedler, K. Torkar, H. Jeszenszky, G. Stangl:
    "MIDAS - The Micro-Imaging Dust Analysis System for the Rosetta Mission";
    Space Science Reviews, 128 (2007), S. 869 - 904.

  582. Autor/in: Karl Riedling, E366

    K. Riedling:
    "Die Publikationsdatenbank der Technischen Universität Wien";
    Mitteilungen der VÖB, 58 (2005), 2; S. 30 - 49.

    Zusätzliche Informationen

  583. Autor/innen: Christian Riesch, E366 - MNS; Bernhard Jakoby, JKU Linz

    Ch. Riesch, B. Jakoby:
    "Novel Readout Electronics for Thickness Shear-Mode Liquid Sensors Compensating for Spurious Conductivity and Capacitances";
    IEEE Sensors Journal, 7 (2007), 3; S. 464 - 469.

  584. Autor/innen: Christian Riesch, E366 - MNS; E. K. Reichel, JKU Linz - Mikroelec; Artur Jachimowicz, E366 - MNS; Johannes Schalko, E366 - MNS; Peter Hudek; Bernhard Jakoby, JKU Linz; Franz Keplinger, E366 - MNS

    Ch. Riesch, E. Reichel, A. Jachimowicz, J. Schalko, P. Hudek, B. Jakoby, F. Keplinger:
    "A suspended plate viscosity sensor featuring in-plane vibration and piezoresistive readout";
    Journal of Micromechanics and Microengineering, 19 (2009), S. 075010-01 - 075010-10.

  585. Autor/innen: Christian Riesch, E366 - MNS; E. K. Reichel, JKU Linz - Mikroelec; Franz Keplinger, E366 - MNS; Bernhard Jakoby, JKU Linz

    Ch. Riesch, E. Reichel, F. Keplinger, B. Jakoby:
    "Characterizing Vibrating Cantilevers for Liquid Viscosity and Density Sensing";
    Journal of Sensors, 2008 (2008), 9 S.

  586. Autor/innen: Christian Riesch, E366 - MNS; E. K. Reichel, JKU Linz - Mikroelec; Franz Keplinger, E366 - MNS; Bernhard Jakoby, JKU Linz

    Ch. Riesch, E. Reichel, F. Keplinger, B. Jakoby:
    "Miniaturisierte Sensoren für die Viskositätsmessung";
    Sensors - Das Sensortechnik-Magazin (eingeladen), 1 (2007), S. 22 - 27.

  587. Autor/innen: P. Ripka; Gabor Vértesy; L. Panina; M. Yamaguchi; Hans Hauser, E366 - AEM; D. Mapps; J.M. Barandiaran; L. Lanotte

    P. Ripka, G. Vértesy, L. Panina, M. Yamaguchi, H. Hauser, D. Mapps, J. Barandiaran, L. Lanotte:
    "Sensors based on soft magnetic materials - Panel discussion";
    Journal of Magnetism and Magnetic Materials, 215-216 (2000), S. 795 - 799.

  588. Autor/innen: P. Ripka; M. Vopálenský; A. Platil; M. Döscher; K.-M.H. Lenssen; Hans Hauser, E366 - AEM

    P. Ripka, M. Vopálenský, A. Platil, M. Döscher, K. Lenssen, H. Hauser:
    "AMR magnetometer";
    Journal of Magnetism and Magnetic Materials, 254-255 (2003), S. 639 - 641.

  589. Autor/innen: Manel Rodríguez Ripoll, ACēT research GmbH; Bernhard Scheichl, E322; Davide Bianchi, ACēT research GmbH; Balázs Jakab, ACēT research GmbH; Friedrich Franek, E366 - MST

    M. Rodríguez Ripoll, B. Scheichl, D. Bianchi, B. Jakab, F. Franek:
    "Development of a mechanical model of doctor-blade roll tribosystem with aim to optimise cleaning performance: numerical predictions and first experimental verification";
    Tribology - Materials, Surfaces & Interfaces (eingeladen), 8 (Special issue on the 3rd International Tribology Symposium of the IFToMM: Part I) (2014), 1; S. 41 - 47.

    Zusätzliche Informationen

  590. Autor/innen: Manel Rodríguez Ripoll, ACēT research GmbH; Bernhard Scheichl, E322; Balázs Jakab, ACēT research GmbH; Friedrich Franek, E366 - MST

    M. Rodríguez Ripoll, B. Scheichl, B. Jakab, F. Franek:
    "Modelling the Doctor Blade-Roller Tribosystem for Improving the Cleaning Performance During Paper Production";
    Tribology Letters, 51 (2013), 2; S. 199 - 205.

    Zusätzliche Informationen

  591. Autor/innen: Michael Rosenauer, E366 - MNS; Wolfgang Herbert Buchegger, E366 - MNS; Inez Finoulst, TU Delft; Peter D.E.M. Verhaert, TU Delft; Michael J. Vellekoop, E366 - MNS

    M. Rosenauer, W.H. Buchegger, I. Finoulst, Peter Verhaert, M. Vellekoop:
    "Miniaturized flow cytometer with 3d hydrodynamic particle focusing and integrated optical elements applying silicon photodiodes";
    Microfluidics and Nanofluidics, 10 (2011), S. 761 - 771.

  592. Autor/innen: Michael Rosenauer, E366 - MNS; Michael J. Vellekoop, E366 - MNS

    M. Rosenauer, M. Vellekoop:
    "3D - fluidic lens shaping - A multiconvex hydrodynamically adjustable optofluidic microlens";
    Lab on a Chip, 9 (2009), S. 1040 - 1042.

  593. Autor/innen: Michael Rosenauer, E366 - MNS; Michael J. Vellekoop, E366 - MNS

    M. Rosenauer, M. Vellekoop:
    "A versatile liquid-core/liquid-twin-cladding waveguide micro flow cell fabricated by rapid prototyping";
    Applied Physics Letters, 95 (2009), 163702.

  594. Autor/innen: Michael Rosenauer, E366 - MNS; Michael J. Vellekoop, E366 - MNS

    M. Rosenauer, M. Vellekoop:
    "Characterization of an on-chip reconfigurable 3D optofluidic microlens by confocal laser scanning microscopy";
    Procedia Engineering, 5 (2010), S. 440 - 443.

  595. Autor/innen: Michael Rosenauer, E366 - MNS; Michael J. Vellekoop, E366 - MNS

    M. Rosenauer, M. Vellekoop:
    "Characterization of an optofluidic microflow cytometer with an integrated three-dimensional optofluidic lens system";
    Biomicrofluidics, 4 (2010), S. 043005-1 - 043005--12.

  596. Autor/innen: Michael Rosenauer, E366 - MNS; Emanuel Weber, E366 - MNS; Jürgen Stampfl, E308 - S; Michael J. Vellekoop, E366 - MNS

    M. Rosenauer, E. Weber, J. Stampfl, M. Vellekoop:
    "Optofluidische Komponenten in der Flüssigkeitssensorik";
    TM - Technisches Messen, 77 (2010), 2; S. 89 - 94.

  597. Autor/innen: Michael Rosenauer, E366 - MNS; S. Zoppel, FH Vorarlberg; Manfred Spitzbart; Michael J. Vellekoop, E366 - MNS

    M. Rosenauer, S. Zoppel, M. Spitzbart, M. Vellekoop:
    "Rapid Prototyping für optofluidische Anwendungen";
    E&I Elektrotechnik und Informationstechnik, 126 (2009), 1-2; S. 64 - 69.

  598. Autor/innen: Manish Roy, ACēT; Friedrich Franek, E366 - MST; Andreas Pauschitz, E366 - MST

    M. Roy, F. Franek, A. Pauschitz:
    "Sliding Wear Behaviour of Nanocrystalline Cr3C2 - 25 (Ni20Cr) Coating at Elevated Temperature. Tribological Research and Design for Engineering Systems";
    Tribology Series, Elsevier Science B.V. (2003), S. 141 - 149.

  599. Autor/innen: M. Roy; Slimane Ghodbane; Thomas Koch, E308 - S; A. Pauschitz; D. Steinmüller-Nethl; Agnieszka Tomala; Christian Tomastik; Friedrich Franek, E366 - MST

    M. Roy, S Ghodbane, T. Koch, A. Pauschitz, D. Steinmüller-Nethl, A Tomala, C Tomastik, F. Franek:
    "Tribological investigation of nanocrystalline diamond films at low load under different tribosystems";
    Diamond and Related Materials, 20 (2011), 4; S. 573 - 583.

    Zusätzliche Informationen

  600. Autor/innen: Maish Roy; A. Pauschitz; Johannes Bernardi, E057B; Thomas Koch, E308 - S; Friedrich Franek, E366 - MST

    M. Roy, A. Pauschitz, J. Bernardi, T. Koch, F. Franek:
    "Microstructure and mechanical properties of HVOF sprayed nanocrystalline Cr3C2-25 (Ni20Cr) coating";
    Journal of Thermal Spray Technology, 15 (2006), 3; S. 372 - 381.

  601. Autor/innen: M. Roy; Andreas Pauschitz, E366 - MST; Johann Wernisch, E138; Friedrich Franek, E366 - MST

    M. Roy, A. Pauschitz, J. Wernisch, F. Franek:
    "Effect of mating surface on the high temperature wear of 253 MA alloy";
    Materials and Corrosion, 55 (2004), 4; S. 259 - 273.

    Zusätzliche Informationen

  602. Autor/innen: M. Roy; A. Pauschitz; Johann Wernisch, E138; Friedrich Franek, E366 - MST

    M. Roy, A. Pauschitz, J. Wernisch, F. Franek:
    "The influence of temperature on the wear of Cr3C2-25(Ni20Cr) coating - comparison between nanocrystalline grains and conventional grain";
    Wear, 257 (2004), S. 799 - 811.

    Zusätzliche Informationen

  603. Autor/innen: D. Ruiz; J. Hernando-Garcia; A. Ababneh, Yarmouk University; Helmut Seidel, UNI Saarland, LMM; Ulrich Schmid, E366 - MST; J.K. Gimzewski

    V. Ruiz, J. Hernando-Garcia, A. Ababneh, H. Seidel, U. Schmid, J. Gimzewski:
    "Characterization of the first in-plane mode of AlN-actuated microcantilevers";
    Proceedings of SPIE, 8066 (2011), S. 1 - 7.

    Zusätzliche Informationen

  604. Autor/innen: D. Ruiz; J. Hernando-Garcia; A. Ababneh, Yarmouk University; Helmut Seidel, UNI Saarland, LMM; Ulrich Schmid, E366 - MST; Jose Luis Sànchez-Rojas

    V. Ruiz, J. Hernando-Garcia, A. Ababneh, H. Seidel, U. Schmid, J.L. Sànchez-Rojas:
    "Modelling and characterization of AlN-actuated microcantilevers vibrating in the first in-plane mode";
    Microsystem Technologies - Micro- and Nanosystems - Information Storage and Processing Systems, 18 (2012), S. 997 - 1001.

    Zusätzliche Informationen

  605. Autor/innen: V. Ruiz-Díez; A. Donoso; J. C. Bellido; Martin Kucera, E366 - MST; Ulrich Schmid, E366 - MST; Jose Luis Sànchez-Rojas

    V Ruiz-Díez, A. Donoso, J. Bellido, M. Kucera, U. Schmid, J.L. Sànchez-Rojas:
    "Design of piezoelectric microtransducers based on the topology optimization method";
    Microsystem Technologies - Micro- and Nanosystems - Information Storage and Processing Systems, 22 (2016), S. 1733 - 1740.

    Zusätzliche Informationen

  606. Autor/innen: V. Ruiz-Díez; J. Hernando-Garcia; T. Manzaneque; Martin Kucera, E366 - MST; Ulrich Schmid, E366 - MST; Jose Luis Sànchez-Rojas

    V Ruiz-Díez, J. Hernando-Garcia, T. Manzaneque, M. Kucera, U. Schmid, J.L. Sànchez-Rojas:
    "Modelling out-of-plane and in-plane resonant modes of microplates in liquid media";
    Journal of Micromechanics and Microengineering, 25 (2015).

    Zusätzliche Informationen

  607. Autor/innen: V. Ruiz-Díez; J. Hernando-Garcia; T. Manzaneque; Martin Kucera, E366 - MST; Ulrich Schmid, E366 - MST; Jose Luis Sànchez-Rojas

    V Ruiz-Díez, J. Hernando-Garcia, T. Manzaneque, M. Kucera, U. Schmid, J.L. Sànchez-Rojas:
    "Viscous and acoustic losses in length-extensional microplate resonators in liquid media";
    Applied Physics Letters, 106 (2015).

    Zusätzliche Informationen

  608. Autor/innen: V. Ruiz-Díez; J. Hernando-Garcia; J. Toledo; T. Manzaneque; Martin Kucera, E366 - MST; Georg Pfusterschmied, E366 - MST; Ulrich Schmid, E366 - MST; Jose Luis Sànchez-Rojas

    V Ruiz-Díez, J. Hernando-Garcia, J. Toledo, T. Manzaneque, M. Kucera, G. Pfusterschmied, U. Schmid, J.L. Sànchez-Rojas:
    "Modelling and Characterization of the Roof tile-shaped Modes of AlN-based Cantilever Resonators in Liquid Media";
    Journal of Micromechanics and Microengineering, 26 (2016), S. 084008-1 - 084008-11.

    Zusätzliche Informationen

  609. Autor/innen: V. Ruiz-Díez; T. Manzaneque; J. Hernando-Garcia; A. Ababneh, Yarmouk University; Martin Kucera, E366 - MST; Ulrich Schmid, E366 - MST; Helmut Seidel, UNI Saarland, LMM; Jose Luis Sànchez-Rojas

    V Ruiz-Díez, T. Manzaneque, J. Hernando-Garcia, A. Ababneh, M. Kucera, U. Schmid, H. Seidel, J.L. Sànchez-Rojas:
    "Design and characterization of AlN-based in-plane microplate resonators";
    Journal of Micromechanics and Microengineering, 23 (2013).

    Zusätzliche Informationen

  610. Autor/innen: Matthias Sachse, ÖAW; Wilfried Hortschitz, ÖAW; Franz Kohl, Acad. of Sciences; Johannes Schalko, E366 - MNS; Franz Keplinger, E366 - MNS

    M. Sachse, W. Hortschitz, F. Kohl, J. Schalko, F. Keplinger:
    "A Middle Ear Microphone Design Basid on the Physiology of the Ear";
    Procedia Engineering, 5 (2010), S. 500 - 503.

  611. Autor/innen: Matthias Sachse, ÖAW; Wilfried Hortschitz, ÖAW; Harald Steiner, ÖAW; Franz Keplinger, E366 - MNS; Artur Jachimowicz, E366 - MNS; Johannes Schalko, E366 - MNS

    M. Sachse, W. Hortschitz, H. Steiner, F. Keplinger, A. Jachimowicz, J. Schalko:
    "A Middle Ear Microphone Design Based on the Physiology of the Human Ear";
    Procedia Engineering, 00 (2011), 4 S.

  612. Autor/innen: Pedram Sadeghi, E366 - MNS; Wu Kaiyu, DTU Denmark; Anja Boisen, TU Denmark; Silvan Schmid, E366 - MNS

    P. Sadeghi, W. Kaiyu, A. Boisen, S. Schmid:
    "Fabrication and characterization of Au dimer antennas on glass pillars with enhanced plasmonic response";
    Nanophotonics, 30-6-2017 (2017).

  613. Autor/innen: Dominik Samson, E366 - MST; Martin Kluge, EADS; Thomas Becker, EADS; T. Otterpohl, Uni Paderborn; Ulrich Schmid, E366 - MST

    D. Samson, M. Kluge, Th. Becker, T. Otterpohl, U. Schmid:
    "Energieautonomer Funknetzwerkknoten für Luftfahrzeuge";
    Elektrotechnik und Informationstechnik (e&i), 127 (2010), 6; S. 176 - 180.

    Zusätzliche Informationen

  614. Autor/innen: Dominik Samson, E366 - MST; Martin Kluge, EADS; Thomas Becker, EADS; Ulrich Schmid, E366 - MST

    D. Samson, M. Kluge, Th. Becker, U. Schmid:
    "Energy Harvesting for Autonomous Wireless Sensor Nodes in Aircraft";
    Procedia Engineering, 5 (2010), S. 1160 - 1163.

    Zusätzliche Informationen

  615. Autor/innen: Dominik Samson, E366 - MST; Martin Kluge, EADS; Thomas Becker, EADS; Ulrich Schmid, E366 - MST

    D. Samson, M. Kluge, Th. Becker, U. Schmid:
    "Energy Harvesting for Remote Monitoring of Aircraft Seats";
    Sensor Letters, 8 (2010), 2; S. 328 - 335.

    Zusätzliche Informationen

  616. Autor/innen: Dominik Samson, E366 - MST; Martin Kluge, EADS; Thomas Becker, EADS; Ulrich Schmid, E366 - MST

    D. Samson, M. Kluge, Th. Becker, U. Schmid:
    "Wireless sensor node powered by aircraft specific thermoelectric energy harvesting";
    Sensors XXXX, 172 (2011), S. 240 - 244.

    Zusätzliche Informationen

  617. Autor/innen: Dominik Samson, E366 - MST; Martin Kluge, EADS; T. Fuss, EADS; Ulrich Schmid, E366 - MST; Thomas Becker, EADS

    D. Samson, M. Kluge, T. Fuss, U. Schmid, Th. Becker:
    "Flight Test Results of a Thermoelectric Energy Harvester for Aircraft";
    Journal of Electronic Materials, 41 (2012), 6; S. 1134 - 1137.

    Zusätzliche Informationen

  618. Autor/innen: Dominik Samson, E366 - MST; T. Otterpohl, Uni Paderborn; Martin Kluge, EADS; Ulrich Schmid, E366 - MST; Thomas Becker, EADS

    D. Samson, T. Otterpohl, M. Kluge, U. Schmid, Th. Becker:
    "Aircraft-Specific Thermoelectric Generator Module";
    Journal of Electronic Materials, 39 (2010), 9; S. 2092 - 2095.

    Zusätzliche Informationen

  619. Autor/innen: Jose Luis Sànchez-Rojas; J. Hernando-Garcia; A. Donoso; J. C. Bellido; T. Manzaneque; A. Ababneh, Yarmouk University; Helmut Seidel, UNI Saarland, LMM; Ulrich Schmid, E366 - MST

    J.L. Sànchez-Rojas, J. Hernando-Garcia, A. Donoso, J. Bellido, T. Manzaneque, A. Ababneh, H. Seidel, U. Schmid:
    "Modal optimization and filtering in piezoelectric microplate resonators";
    Journal of Micromechanics and Microengineering, 20 (2010), 5.

    Zusätzliche Informationen

  620. Autor/innen: Thilo Sauter, E384; Nikolaus Kerö, E366

    T. Sauter, N. Kerö:
    "Design of an analogue transceiver for speech communication systems";
    Microelectronics Journal, 30 (1999), S. 247 - 253.

  621. Autor/innen: Thilo Sauter, E384; Nikolaus Kerö, E366; Georg Brasseur, E366 - MNS

    T. Sauter, N. Kerö, G. Brasseur:
    "Vollständig integriertes kapazitives Winkelsensorsystem für den Einsatz unter erschwerten Umweltbedingungen";
    Elektrotechnik und Informationstechnik (e&i), 11 (2001), S. 609 - 617.

  622. Autor/innen: Thilo Sauter, E384; Fritz Paschke, E366

    T. Sauter, F. Paschke:
    "Can Bessel beams carry superluminal signals?";
    Physics Letters A, 285 (2001), S. 1 - 6.

  623. Autor/innen: Johannes Schalko, E366 - MNS; Roman Beigelbeck, ÖAW; Michael Stifter, ÖAW; Michael Schneider, E366 - MST; Achim Bittner, E366 - MST; Ulrich Schmid, E366 - MST

    J. Schalko, R. Beigelbeck, M. Stifter, M. Schneider, A. Bittner, U. Schmid:
    "Improved Load-Deflection Method for the Extraction of Elastomechanical Properties of Circularly-Shaped Thin-Film Diaphragms";
    Proceedings of SPIE, 8066 (2011), S. 1 - 8.

    Zusätzliche Informationen

  624. Autor/innen: Michael Schleeger; Christoph Wagner, E164 - UPA; Michael J. Vellekoop, E366 - MNS; Bernhard Lendl, E164 - UPA; Joachim Heberle

    M. Schleeger, C. Wagner, M. Vellekoop, B. Lendl, J. Heberle:
    "Time-resolved flow-flash FT-IR difference spectroscopy: the kinetics of CO photodissociation from myoglobin revisited";
    Analytical and Bioanalytical Chemistry, 394 (2009), 7; S. 1869 - 1877.

    Zusätzliche Informationen

  625. Autor/innen: A. Schleunitz; Harald Steffes; Rupert Chabicovsky, E366 - MNS; Ernst Obermeier

    A. Schleunitz, H. Steffes, R. Chabicovsky, E. Obermeier:
    "Optical Gas Sensitivity of a Metaloxide Multilayer System with Gold-Nano-Clusters";
    Sensors and Actuators B: Chemical, 127 (2007), S. 210 - 216.

  626. Autor/in: Ulrich Schmid, E366 - MST

    U. Schmid:
    "Guest Editorial: Microactuators for Fluidic Applications";
    Journal of Microelectronics and Electronic Packaging (eingeladen), 6 (2010), 4; S. 188.

  627. Autor/innen: Ulrich Schmid, E366 - MST; Thomas Becker, EADS; Bernd Michel, MMC-Berlin

    U. Schmid, Th. Becker, B. Michel:
    "Special issue of the conference `Smart Sensors, Actuators andMEMSī, within the SPIE EUROPE Symposium `MICROTECHNOLOGIESī Prague, Czech Republic, 18-20 April 2011";
    Microsystem Technologies - Micro- and Nanosystems - Information Storage and Processing Systems (eingeladen), Volume 18 (2012), Issue 7-8; S. 833.

  628. Autor/innen: Ulrich Schmid, E366 - MST; M. Grosser, Saarland University

    U. Schmid, M. Grosser:
    "Electrical performance of Ti/Pt thin films on glass-ceramic substrates after high temperature loading";
    Applied Physics A: Materials Science & Processing, 96 (2009), S. 921 - 932.

    Zusätzliche Informationen

  629. Autor/innen: Ulrich Schmid, E183 - 1; Johann Klasek, E183 - 1; Thomas Mandl, E183 - 1; Herbert Nachtnebel, E366; Gerhard Cadek, E366; Nikolaus Kerö, E366

    U. Schmid, J. Klasek, T. Mandl, H. Nachtnebel, G. Cadek, N. Kerö:
    "A Network Time Interface M-Module for Distributing GPS-time over LANs";
    Real-Time Systems, 18 (2000), 1; S. 25 - 57.

  630. Autor/innen: Ulrich Schmid, E366 - MST; G. Krötz, Saarland University

    U. Schmid, G. Krötz:
    "Monitoring the Hydraulic Conditions in Automotive Injection Systems Using Robust Flow Sensors";
    Sensor Letters, 6 (2008), 5; S. 771 - 777.

  631. Autor/in: Alexander Schneider, E366 - MNS

    A. Schneider:
    "Model of the diffuse reflectivity of fly ash and its application to an optical sensor system...";
    Applied Optics, 38 (1999), 27; S. 5710 - 5723.

  632. Autor/innen: Ameneh Schneider, ACēT; Josef Brenner, ACēT; Doris Steinmüller-Nethl, Rho Best Coating; Manish Roy, ACēT; Friedrich Franek, E366 - MST

    A. Schneider, J. Brenner, D. Steinmüller-Nethl, M. Roy, F. Franek:
    "Tribological properties of lubricated nanocrystalline diamond surfaces for various loads and geometries";
    Tribology - Materials, Surfaces & Interfaces, 3 (2009), S. 175 - 181.

    Zusätzliche Informationen

  633. Autor/innen: Ameneh Schneider, ACēT; Josef Brenner, ACēT; Christian Tomastik, ACēT; Friedrich Franek, E366 - MST

    A. Schneider, J. Brenner, C. Tomastik, F. Franek:
    "Capacity of selected ionic liquids as alternative EP/AW additive";
    Lubrication Science, 22 (2010), 6-7; S. 215 - 223.

    Zusätzliche Informationen

  634. Autor/innen: Alexander Schneider, E366 - MNS; Rupert Chabicovsky, E366 - MNS; A. Aumüller

    A. Schneider, R. Chabicovsky, A. Aumüller:
    "Optical sensor system for the on-line measurement of carbon in fly-ash";
    Sensors XXXX, 67 (1998), S. 24 - 31.

  635. Autor/innen: Ameneh Schneider, ACēT; Doris Steinmüller-Nethl, Rho Best Coating; Manish Roy, ACēT; Friedrich Franek, E366 - MST

    A. Schneider, D. Steinmüller-Nethl, M. Roy, F. Franek:
    "Enhanced tribological performances of nanocrystalline diamond film";
    International Journal of Refractory Metals & Hard Materials, 28 (2010), 1; S. 40 - 50.

    Zusätzliche Informationen

  636. Autor/innen: Michael Schneider, E366 - MST; Achim Bittner, E366 - MST; Alexander Klein, E366 - MST; Ulrich Schmid, E366 - MST

    M. Schneider, A. Bittner, A. Klein, U. Schmid:
    "Impact of film thickness and temperature on the dielectric breakdown behavior of sputtered aluminum nitride thin films";
    Microelectronic Engineering, 140 (2015), S. 47 - 51.

    Zusätzliche Informationen

  637. Autor/innen: Michael Schneider, E366 - MST; Achim Bittner, E366 - MST; Florian Patocka, E366 - MST; Michael Stöger-Pollach, E057B; Erich Halwax, E164 - SC; Ulrich Schmid, E366 - MST

    M. Schneider, A. Bittner, F. Patocka, M. Stöger-Pollach, E. Halwax, U. Schmid:
    "Impact of the surface-near silicon substrate properties on the microstructure of sputter-deposited AIN thin films";
    Applied Physics Letters, 101 (2012), S. 221602-1 - 221602-4.

  638. Autor/innen: Michael Schneider, E366 - MST; Achim Bittner, E366 - MST; Ulrich Schmid, E366 - MST

    M. Schneider, A. Bittner, U. Schmid:
    "Impact of film thickness on the temperature-activated leakagecurrent behavior of sputtered aluminum nitride thin films";
    Sensors and Actuators A: Physical, 224 (2015), S. 177 - 184.

    Zusätzliche Informationen

  639. Autor/innen: Michael Schneider, E366 - MST; Achim Bittner, E366 - MST; Ulrich Schmid, E366 - MST

    M. Schneider, A. Bittner, U. Schmid:
    "Improved piezoelectric constants of sputtered aluminium nitride thin films by pre-conditioning of the silicon surface";
    Journal of Physics D: Applied Physics, 48 (2015).

    Zusätzliche Informationen

  640. Autor/innen: Michael Schneider, E366 - MST; Achim Bittner, E366 - MST; Ulrich Schmid, E366 - MST

    M. Schneider, A. Bittner, U. Schmid:
    "Temperature dependant dielectric breakdown of sputter‑deposited AlN thin films using a time‑zero approach";
    Microsystem Technologies - Micro- and Nanosystems - Information Storage and Processing Systems, 20 (2014), S. 751 - 757.

    Zusätzliche Informationen

  641. Autor/innen: Michael Schneider, E366 - MST; Achim Bittner, E366 - MST; Ulrich Schmid, E366 - MST

    M. Schneider, A. Bittner, U. Schmid:
    "Thickness dependence of Youngīs modulus and residual stress of sputtered aluminum nitride thin films";
    Applied Physics Letters, 105 (2014), S. 201912-1.

    Zusätzliche Informationen

  642. Autor/innen: Michael Schneider, E366 - MST; Tobias Strunz, E366 - MST; Achim Bittner, E366 - MST; Ulrich Schmid, E366 - MST

    M. Schneider, T. Strunz, A. Bittner, U. Schmid:
    "Impact of Sputter Deposition Parameters on the Leakage Current Behavior of Aluminum Nitride Thin Films";
    Advances in Science and Technology, 77 (2012), 29; S. 29 - 34.

    Zusätzliche Informationen

  643. Autor/in: Oswald Schrott, E366 - AEM

    O. Schrott:
    "Préparation des matériaux de contact WC/Ag de différente homogénéité";
    Structure, 40 (2003), S. 6 - 8.

  644. Autor/innen: Dieter Schrottmayer, E366 - AEM; Johann Nicolics, E366 - AEM; Laszlo Musiejovsky, E366 - AEM

    H. Schrottmayer, J. Nicolics, L. Musiejovsky:
    "Investigation of a New Measuring Method for the Dynamic Wettability using Laser Technology";
    Transactions on Precision and Electronic Technology, 3 (1997), S. 113 - 118.

  645. Autor/innen: A. Schütz, E366; Siegfried Selberherr, E360; Hans Pötzl, E366

    A. Schütz, S. Selberherr, H. Pötzl:
    "A Two-Dimensional Model of the Avalanche Effect in MOS Transistors";
    Solid-State Electronics, 25 (1982), 3; S. 177 - 183.

    Zusätzliche Informationen

  646. Autor/innen: A. Schütz, E366; Siegfried Selberherr, E360; Hans Pötzl, E366

    A. Schütz, S. Selberherr, H. Pötzl:
    "Analysis of Breakdown Phenomena in MOSFET's";
    IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, CAD-1 (1982), 2; S. 77 - 85.

    Zusätzliche Informationen

  647. Autor/innen: A. Schütz, E366; Siegfried Selberherr, E360; Hans Pötzl, E366

    A. Schütz, S. Selberherr, H. Pötzl:
    "Modeling MOS-Transistors in the Avalanche Breakdown Regime";
    Transactions on Computer Simulation (eingeladen), 1 (1984), 1; S. 1 - 14.

  648. Autor/innen: A. Schütz, E366; Siegfried Selberherr, E360; Hans Pötzl, E366

    A. Schütz, S. Selberherr, H. Pötzl:
    "Temperature Distribution and Power Dissipation in MOSFETs";
    Solid-State Electronics, 27 (1984), 4; S. 394 - 395.

    Zusätzliche Informationen

  649. Autor/innen: S. Schweitzer; Christian Sommer; Paul Hartmann, Joanneum-Weiz; Paul L. Fulmek, E366 - AEM; Johann Nicolics, E366 - AEM; P. Pachler, Tridonic-Jennersdorf; H. Hoschopf, Tridonic-Jennersdorf; F. Schrank; Gregor Langer, AT&S; F.-P. Wenzl, Joanneum-Weiz

    S. Schweitzer, Ch. Sommer, P. Hartmann, P. Fulmek, J. Nicolics, P. Pachler, H. Hoschopf, F. Schrank, G. Langer, F. Wenzl:
    "A comprehensive discussion on colour conversion element design of phosphor converted LEDs";
    Journal of Solid State Lighting, 1 (2014), 18; S. 14.

  650. Autor/in: Franz Seifert, E366 - MNS

    F. Seifert:
    "Täuschungssicherheit durch breitbandige Verschlüsselung";
    Elektrotechnik und Informationstechnik (e&i), 11 (2008), S. 19 - 22.

  651. Autor/innen: Franz Seifert, E366 - MNS; Alfred Pohl, E366 - MNS; Leonhard Reindl; Reinhard Steindl, E366 - MNS

    F. Seifert, A. Pohl, L. Reindl, R. Steindl:
    "Drahtlose Abfage von Oberflächenwellen-Identifikationsmarken lund Meßwertwandlern";
    Elektrotechnik und Informationstechnik (e&i), 115 (1998), S. 360 - 370.

  652. Autor/innen: Franz Seifert, E366 - MNS; G. Riha

    F. Seifert, G. Riha:
    "Evolution der akustischen Oberflächenwellen-Bauelemente";
    Elektrotechnik und Informationstechnik (e&i), 3 (2003), S. 79 - 90.

  653. Autor/in: Franz Peter Seiler, E366

    F.P. Seiler:
    "Learning and Educational Access using Remote Networks - Enabling the Disabled";
    TELL&CALL - Zeitschrift für technologie-unterstützten Unterricht (eingeladen), 2 (1996), S. 34 - 36.

  654. Autor/in: Franz Peter Seiler, E366

    F.P. Seiler:
    "Rehabilitation Technology at the Vienna University of Technology";
    ACM SIGCAPH Newsletter (eingeladen), 54 (1996), S. 9 - 19.

  655. Autor/innen: N. Sekiguchi; T. Komeda; H. Funakubo; Rupert Chabicovsky, E366 - MNS; Johann Nicolics, E366 - AEM; Günther Stangl, E366 - MNS

    N. Sekiguchi, T. Komeda, H. Funakubo, R. Chabicovsky, J. Nicolics, G. Stangl:
    "Microsensor for the measurement of water content in the human skin";
    Sensors and Actuators B: Chemical, 78 (2001), S. 326 - 330.

  656. Autor/innen: Siegfried Selberherr, E360; A. Schütz, E366; Hans Pötzl, E366

    S. Selberherr, A. Schütz, H. Pötzl:
    "Investigation of Parameter Sensitivity of Short Channel MOSFETs";
    Solid-State Electronics, 25 (1982), 2; S. 85 - 90.

    Zusätzliche Informationen

  657. Autor/innen: Siegfried Selberherr, E360; A. Schütz, E366; Hans Pötzl, E366

    S. Selberherr, A. Schütz, H. Pötzl:
    "MINIMOS - A Two-Dimensional MOS Transistor Analyzer";
    IEEE Transactions on Electron Devices, 27 (1980), 8; S. 1540 - 1550.

    Zusätzliche Informationen

  658. Autor/innen: Siegfried Selberherr, E360; A. Schütz, E366; Hans Pötzl, E366

    S. Selberherr, A. Schütz, H. Pötzl:
    "MINIMOS - A Two-Dimensional MOS Transistor Analyzer";
    IEEE Journal of Solid-State Circuits, 15 (1980), 4; S. 605 - 615.

    Zusätzliche Informationen

  659. Autor/innen: Siegfried Selberherr, E360; A. Schütz, E366; Hans Pötzl, E366

    S. Selberherr, A. Schütz, H. Pötzl:
    "MINIMOS - Zweidimensionale Modellierung von MOS-Transistoren (Teil 1)";
    Elektronikschau, 9 (1980), S. 18 - 23.

  660. Autor/innen: Siegfried Selberherr, E360; A. Schütz, E366;