TU Home
This publication list has been generated automatically from the publication data of the Faculty of Mechanical and Industrial Engineering. Please invoke the page "Publications of the Faculty" directly for more complex searches and queries, or use the global search function of the Publication Database of the Vienna University of Technology!


Publication Database Home  

Publication list for members of
E308 - Institute of Materials Science and -Technology
as authors or essentially involved persons

3011 records (1993 - 2019)

The complete list of publications of the Faculty of Mechanical and Industrial Engineering is available from the publication database beginning with the publication year 2002. The database may but need not necessarily contain publications dated earlier than 2002.


Books and Book Editorships


  1. Author: V.-M. Archodoulaki, E308-S

    V. Archodoulaki:
    "Eigenschaftsänderungen von Polyoxymethylenen induziert durch Verarbeitung, Alterung und Recycling";
    VDI Verlag GmbH, Düsseldorf, 2005, ISBN: 3-18-370505-2; 232 pages.

  2. Author: Hans-Peter Degischer, E308-D

    H.P. Degischer (ed.):
    "Verbundwerkstoffe";
    Wiley-VCH, Weinheim, 2003, ISBN: 3-527-30762-1; 959 pages.

  3. Authors: Hans-Peter Degischer, E308-D; Brigitte Kriszt, E308-D

    H.P. Degischer, B. Kriszt (ed.):
    "Handbook of Cellular Metals";
    Wiley-VCH, Weinheim, 2002, ISBN: 3-527-30339-1; 373 pages.

  4. Authors: Hans-Peter Degischer, E308-D; Sigrid Lüftl, E308-S

    H.P. Degischer, S. Lüftl (ed.):
    "Leichtbau - Prinzipien, Werkstoffauswahl und Fertigungsvarianten";
    Wiley-VCH, Weinheim, 2009, ISBN: 978-3-527-32372-2; 394 pages.

    More information

  5. Authors: W. Grellmann; Sabine Seidler, E308-S

    W. Grellmann, S. Seidler (ed.):
    "Kunststoffprüfung";
    Carl Hanser Verlag, München, Wien, 2005, ISBN: 3-446-22086-0; 738 pages.

  6. Authors: Wolfgang Grellmann, M.-Luther-Universit.; Sabine Seidler, E308-S
    Other persons involved: Karl-Friedrich Arndt; Manfred Dieter Lechner

    W. Grellmann, S. Seidler:
    "Landolt-Börnstein, Volume 6 Polymers, Subvolume A Polymer Solids and Polymer Melts, Part 3 Mechanical and Thermomechanical Properties of Polymers";
    in series "Landolt-Börnstein", series editor: K. Arndt, M. Lechner; issued by: Springer; Springer, Berlin, 2014, ISBN: 978-3-642-55165-9, 524 pages.

  7. Authors: W. Grellmann; Sabine Seidler, E308-S

    W. Grellmann, S. Seidler (ed.):
    "Polymer Testing";
    Carl Hanser Verlag, München, 2007, ISBN: 978-3-446-40900-2; 674 pages.

  8. Authors: David Holec, MU Leoben; Liangcai Zhou, E308-GrMayrh; Richard Rachbauer; Paul Heinz Mayrhofer, E308-GrMayrh
    Other persons involved: Joseph Morin; Jean Marie Pelletier

    D. Holec, L. Zhou, R. Rachbauer, P.H. Mayrhofer:
    "Alloy-based design of materials from first principles: An application to functional hard coatings";
    in series "Density Functional Theory", series editor: J. Morin, J. Pelletier; Nova Science Publishers, Inc, New York, 2013, ISBN: 978-1-62417-955-6, 26 pages.

  9. Author: Thomas Koch, E308-S

    T. Koch:
    "Morphologie und Mikrohärte von Polypropylen-Werkstoffen";
    Mensch & Buch Verlag, Berlin, 2005, ISBN: 3-89820-854-0; 134 pages.

  10. Author: Ernst Kozeschnik, E308-Gr Kozesch

    E. Kozeschnik:
    "Modeling Solid-State Precipitation";
    Momentum Press, LLC, New York, 2013, ISBN: 978-1-60650-062-0; 464 pages.

  11. Author: Fernando Lasagni, E308-D

    F. Lasagni:
    "The role of Si on the microstructure of Al casting alloys and short fibre composites";
    Shaker, Aachen, 2008, ISBN: 978-3-8322-6833-6; 152 pages.

  12. Author: Sigrid Lüftl, E308-S

    S. Lüftl (ed.):
    "Leichtbau: Prinzipien, Werkstoffauswahl und Fertigungsvarianten (Seminarunterlagen zum Seminar Leichtbau, 12.-13-04.2007, Ranshofen)";
    Institut für Werkstoffwissenschaft, 2007, 400 pages.

  13. Authors: Aleksandr Ovsianikov, E308; James Yoo; Vladimir Mironov, 3D Bioprinting S ...

    A. Ovsianikov, J. Yoo, V. Mironov (ed.):
    "3D Printing and Biofabrication";
    Springer International Publishing, Switzerland, 2018, ISBN: 978-3-319-45445-0.

    More information

  14. Authors: Anke Rita Pyzalla, MPI Eisenforschung; Andras Borbély; Hans-Peter Degischer, E308-D

    A. Pyzalla, A. Borbély, H.P. Degischer (ed.):
    "Stress Evaluation in Materials Using Neutrons and Synchrotron Radiation - MECA SENS IV. Materials Science Forum, Volumes 571-572";
    Trans Tech Publications Ltd., Schweiz, 2008, ISBN: 978-0-87849-393-7; 432 pages.

  15. Author: Rene Radis, E308-Gr Kozesch

    R. Radis (ed.):
    "Nickelbasis Superlegierung UDIMET 720 Li - Entstehung Mono- und Multimodaler Ausscheidungsverteilungen von Gamma Strich";
    VDM Verlag, Saarbrücken, Deutschland, 2010, ISBN: 978-3-639-31252-2; 217 pages.

    More information

  16. Author: Rene Radis, E308-Gr Kozesch

    R. Radis:
    "Numerical Simulation of the Precipitation Kinetics of Nitrides and Carbides in Microalloyed Steel";
    Verlag der Technischen Universität Graz, Graz, 2010, ISBN: 978-3-85125-123-4; 157 pages.

    More information

  17. Author: Michael Schöbel, E308-D

    M. Schöbel (ed.):
    "Residual Stresses and Thermal Fatigue in Metal Matrix Composites";
    SVH - Südwestdeutscher Verlag für Hochschulschriften, Heinrich-Böcking-Str. 6-8, 66121 Saarbrücken, Deutschland, 2011, ISBN: 978-3-8381-2899-3; 132 pages.

  18. Authors: Christof Sommitsch, IWS - TU Graz; Michael Ionescu, Univ. Wollongong; B Mishra, Univ. Wollongong; Ernst Kozeschnik, E308-Gr Kozesch; Tara Chandra, Univ. Wollongong

    C. Sommitsch, M. Ionescu, B. Mishra, E. Kozeschnik, T. Chandra (ed.):
    "THERMEC 2016 (Materials Science Forum Vol. 879)";
    Trans Tech Publications Ltd., 2017, ISBN: 978-3-0357-1129-5; 2720 pages.

    More information

  19. Authors: Jürgen Stampfl, E308-S; Robert Liska, E163-02-1; Aleksandr Ovsianikov, E308

    J. Stampfl, R. Liska, A. Ovsianikov (ed.):
    "Multiphoton Lithography: Techniques, Materials and Applications";
    Wiley-VCH, Boschstraße 12, 69469 Weinheim Deutschland, 2016, ISBN: 978-3-527-33717-0; 408 pages.

    More information


Publications in Scientific Journals


  1. Authors: Rainer Abart; Jiri Svoboda, Academy of Scien ...; Petr Jerabek; Erwin Povoden-Karadeniz, E308-Gr Kozesch; Gerlinde Habler

    R. Abart, J. Svoboda, P Jerabek, E. Povoden-Karadeniz, G Habler:
    "Kinetics of layer growth in a binary system with intermediate solid-solution and interfaces with finite mobility acting as non-ideal sources and sinks for vacancies: thermodynamic model and application to magnesio-aluminate spinel layer growth";
    American Journal of Science, 316 (2016), 309 - 328.

    More information

  2. Authors: Mohammad Reza Ahmadi, TU Graz; Markus Rath, E308-Gr Kozesch; Erwin Povoden-Karadeniz, E308-Gr Kozesch; Sophie Primig, UNSW Australia; Anette Danninger, E308-Gr Kozesch; M Stockinger, BÖHLER GmbH; Ernst Kozeschnik, E308-Gr Kozesch

    M. Ahmadi, M. Rath, E. Povoden-Karadeniz, S. Primig, A. Danninger, M. Stockinger, E. Kozeschnik:
    "Modeling of precipitation strengthening in Inconel 718 including non-spherical γ″ precipitates";
    Modelling and Simulation in Materials Science and Engineering, 25 (2017), 5, paper 055005; 2 - 17.

    More information

  3. Authors: Mohammad Reza Ahmadi, E308-Gr Kozesch; Erwin Povoden-Karadeniz, E308-Gr Kozesch; Kerem Ilyas Öksüz, E308-Gr Kozesch; Ahmad Falahati, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    M.R. Ahmadi, E. Povoden-Karadeniz, K. Öksüz, A. Falahati, E. Kozeschnik:
    "A model for precipitation strengthening in multi-particle systems";
    Computational Materials Science, 91 (2014), 173 - 186.

  4. Authors: Mohammad Reza Ahmadi, E308-Gr Kozesch; Erwin Povoden-Karadeniz, E308-Gr Kozesch; Bernhard Sonderegger, TU Graz; Kerem Ilyas Öksüz, E308-Gr Kozesch; Ahmad Falahati, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    M.R. Ahmadi, E. Povoden-Karadeniz, B. Sonderegger, K. Öksüz, A. Falahati, E. Kozeschnik:
    "A model for coherency strengthening of large precipitates";
    Scripta Materialia, 84-85 (2014), 47 - 50.

  5. Authors: Mohammad Reza Ahmadi, E308-Gr Kozesch; Erwin Povoden-Karadeniz, E308-Gr Kozesch; Lawrence Charles Whitmore, E057B; M Stockinger, BÖHLER GmbH; Ahmad Falahati, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    M.R. Ahmadi, E. Povoden-Karadeniz, L.C. Whitmore, M. Stockinger, A. Falahati, E. Kozeschnik:
    "Yield strength prediction in Ni-base alloy 718Plus based on thermo-kinetic precipitation simulation";
    Materials Science and Engineering A, 608 (2014), 114 - 122.

  6. Authors: Mohammad Reza Ahmadi, E308-Gr Kozesch; Bernhard Sonderegger, TU Graz; Erwin Povoden-Karadeniz, E308-Gr Kozesch; Ahmad Falahati, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    M.R. Ahmadi, B. Sonderegger, E. Povoden-Karadeniz, A. Falahati, E. Kozeschnik:
    "Precipitate strengthening of non-spherical precipitates extended in < 100 > or {100} direction in fcc crystals";
    Materials Science and Engineering A, 590 (2014), 262 - 266.

  7. Authors: Mohammad Reza Ahmadi, E308-Gr Kozesch; Lawrence Charles Whitmore, E057B; Erwin Povoden-Karadeniz, E308-Gr Kozesch; M Stockinger, BÖHLER GmbH; Ahmad Falahati, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    M.R. Ahmadi, L.C. Whitmore, E. Povoden-Karadeniz, M. Stockinger, A. Falahati, E. Kozeschnik:
    "Simulation of yield strength in AllvacR 718PlusTM";
    Advanced Materials Research, 922 (2014), 7 - 12.

    More information

  8. Authors: Aliasghar Ajami, E134-03; Peter Gruber, E308-S; Maximilian Tromayer, E163-02-1; Wolfgang Husinsky, E134-03; Jürgen Stampfl, E308-S; Robert Liska, E163-02-1; Aleksandr Ovsianikov, E308-S

    A. Ajami, P. Gruber, M. Tromayer, W. Husinsky, J. Stampfl, R. Liska, A. Ovsianikov:
    "Evidence of concentration dependence of the two-photon absorption cross section: Determining the ``true´´ cross section value";
    Optical Materials, 47 (2015), 524 - 529.

    More information

  9. Authors: Aliasghar Ajami, E134-03; Wolfgang Husinsky, E134-03; Aleksandr Ovsianikov, E308-S; Robert Liska, E163-02-1

    A. Ajami, W. Husinsky, A. Ovsianikov, R. Liska:
    "Dispersive white light continuum single Z-scan for rapid determination of degenerate two-photon absorption spectra";
    Applied Physics B - Lasers and Optics, 124 (7) (2018), 14201 - 14210.

    More information

  10. Authors: Aliasghar Ajami, E134-03; Wolfgang Husinsky, E134-03; Maximilian Tromayer, E163-02-1; Peter Gruber, E308-S; Robert Liska, E163-02-1; Aleksandr Ovsianikov, E308-S

    A. Ajami, W. Husinsky, M. Tromayer, P. Gruber, R. Liska, A. Ovsianikov:
    "Measurement of degenerate two-photon absorption spectra of a series of developed two-photon initiators using a dispersive white light continuum Z-scan";
    Applied Physics Letters, 111 (2017), 0719011 - 0719014.

    More information

  11. Authors: Ruggiero Alessandro; Massimiliano Merola; Pierpaolo Carlone; V.-M. Archodoulaki, E308-S

    R. Alessandro, M. Merola, P. Carlone, V. Archodoulaki:
    "Tribo-mechanical characterization of reinforced epoxy resin under dry and lubricated contact conditions";
    Composites - Part B: Engineering, 79 (2015), 595 - 603.

  12. Authors: Mohammad Alimardani; Mehdi Razzaghi-Kashani; Thomas Koch, E308-S

    M. Alimardani, M. Razzaghi-Kashani, T. Koch:
    "Crack growth resistance in rubber composites with controlled interface bonding and interphase content";
    Journal of Polymer Research, 26 (2019), 47; 1 - 9.

    More information

  13. Authors: Dorel Anghelina; Robert Kienreich; Sabine Zamberger, E308-Gr Kozesch; Jörg Zamberger; Ernst Kozeschnik, E308-Gr Kozesch; Reinhold Schneider, FH Wels

    D. Anghelina, R. Kienreich, S. Zamberger, J. Zamberger, E. Kozeschnik, R. Schneider:
    "Kinetics and control of scaling for reduced surface decarburization of spring steels";
    Metalurgia International, 15 (2010), 5 - 8.

  14. Authors: Fritz Appel, GKSS, Germany; Dirk Herrmann, GKSS - Geesthacht; Franz Dieter Fischer, MU Leoben; Jiri Svoboda, Academy of Scien ...; Ernst Kozeschnik, E308-Gr Kozesch

    F. Appel, D Herrmann, F.D. Fischer, J. Svoboda, E. Kozeschnik:
    "Role of vacancies in work hardening and fatigue of TiAl alloys";
    International Journal of Plasticity, 42 (2013), 83 - 100.

    More information

  15. Authors: V.-M. Archodoulaki, E308-S; Thomas Koch, E308-S; Alexandra Rodriguez, E308-S; Sabine Seidler, E308-S

    V. Archodoulaki, T. Koch, A. Rodriguez, S. Seidler:
    "Influence of different sterilization procedures on the morphological parameters and mechanical properties of ultra-high-molecular-weight polyethylene";
    Journal of Applied Polymer Science, 120 (2011), 4; 1875 - 1884.

    More information

  16. Authors: V.-M. Archodoulaki, E308-S; Sigrid Lüftl, E308-S; Thomas Koch, E308-S; Sabine Seidler, E308-S

    V. Archodoulaki, S. Lüftl, T. Koch, S. Seidler:
    "Property changes in polyoxymethylene (POM) resulting from processing, ageing and recycling";
    Polymer Degradation and Stability, Vol. 92 (2007), 12; 2181 - 2189.

    More information

  17. Authors: V.-M. Archodoulaki, E308-S; Sigrid Lüftl, E308-S; Sabine Seidler, E308-S

    V. Archodoulaki, S. Lüftl, S. Seidler:
    "Degradation Behavior of Polyoxymethylene: Influence of Different Stabilizer Packages";
    Journal of Applied Polymer Science, Vol. 105 (2007), 6; 3679 - 3688.

    More information

  18. Authors: V.-M. Archodoulaki, E308-S; Sigrid Lüftl, E308-S; Sabine Seidler, E308-S

    V. Archodoulaki, S. Lüftl, S. Seidler:
    "Effects of Coloration on the Physical and Mechanical Properties and on the Thermal Stability of Polyoxymethylene";
    Advances in Polymer Technology, 25 (2006), 1; 63 - 72.

  19. Authors: V.-M. Archodoulaki, E308-S; Sigrid Lüftl, E308-S; Sabine Seidler, E308-S

    V. Archodoulaki, S. Lüftl, S. Seidler:
    "Oxidation induction time studies on the thermal degradation behaviour of polyoxymethylene";
    Polymer Testing, 25 (2006), 83 - 90.

  20. Authors: V.-M. Archodoulaki, E308-S; Sigrid Lüftl, E308-S; Sabine Seidler, E308-S

    V. Archodoulaki, S. Lüftl, S. Seidler:
    "Stabiliser consumption of polyoxymethylene investigated by means of the pressure oxidative induction time method";
    Polymer Testing, 27/2 (2007), 234 - 242.

  21. Authors: V.-M. Archodoulaki, E308-S; Sigrid Lüftl, E308-S; Sabine Seidler, E308-S

    V. Archodoulaki, S. Lüftl, S. Seidler:
    "Thermal degredation behaviour of poly(oxymethylene): 1. Degradation and stabilizer consumption";
    Polymer Degradation and Stability, 86 (2004), 75 - 83.

  22. Authors: Hidetoshi Asanuma, E308-GrMayrh; Peter Polcik, Plansee; Szilárd Kolozsvári, Plansee; Fedor Klimashin, E308-GrMayrh; Helmut Riedl, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh

    H. Asanuma, P. Polcik, S. Kolozsvári, F. Klimashin, H. Riedl, P.H. Mayrhofer:
    "Cerium doping of Ti-Al-N coatings for excellent thermal stability and oxidation resistance";
    Surface & Coatings Technology, Part A (2017), 326; 165 - 172.

    More information

  23. Authors: Elias Aschauer, E308-GrMayrh; S Sackl, Montanuni Leoben; Thomas Schachinger, E057B; H Bolvardi, Oerlikon Surface Sol; M Arndt, Oerlikon Surface Sol; P Polcik, Plansee; Helmut Riedl, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh

    E. Aschauer, S. Sackl, T. Schachinger, H. Bolvardi, M. Arndt, P. Polcik, H. Riedl, P.H. Mayrhofer:
    "Atomic scale investigations of thermally treated nano-structured Ti-Al-N/ Mo-Si-B multilayers";
    Surface & Coatings Technology, 349 (2018), 480 - 487.

    More information

  24. Authors: Elias Aschauer, E308-GrMayrh; S Sackl, Montanuni Leoben; Thomas Schachinger, E057B; Tomasz Wojcik, E308-Gr Kozesch; H Bolvardi, Oerlikon Surface Sol; M Arndt, Oerlikon Surface Sol; P Polcik, Plansee; Helmut Riedl, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh

    E. Aschauer, S. Sackl, T. Schachinger, T. Wojcik, H. Bolvardi, M. Arndt, P. Polcik, H. Riedl, P.H. Mayrhofer:
    "Nano-structural investigation of Ti-Al-N/Mo-Si-B multilayer coatings: A comparative study by APT and HR-TEM";
    Vacuum, 157 (2018), 173 - 179.

    More information

  25. Authors: Zahid Asghar, E308-D; Guillermo Requena, E308-D

    Z. Asghar, G. Requena:
    "Three dimensional post-mortem study of damage after compression of cast Al-Si alloys";
    Materials Science and Engineering A, 591 (2014), -; 136 - 143.

    More information

  26. Authors: Zahid Asghar, E308-D; Guillermo Requena, E308-D; Elodie Boller

    Z. Asghar, G. Requena, E. Boller:
    "3D interpenetrating hybrid network of rigid phases in an AlSi10Cu5NiFe piston alloy";
    Praktische Metallographie - Practical Metallography, XLVII (2010), 9; 471 - 486.

  27. Authors: Zahid Asghar, E308-D; Guillermo Requena, E308-D; Elodie Boller

    Z. Asghar, G. Requena, E. Boller:
    "Three-dimensional rigid multiphase networks providing high-temperature strength to cast AlSi10Cu5Ni1-2 piston alloys";
    Acta Materialia, 59 (2011), 16; 6420 - 6432.

  28. Authors: Zahid Asghar, E308-D; Guillermo Requena, E308-D; Hans-Peter Degischer, E308-D; P Cloetens

    Z. Asghar, G. Requena, H.P. Degischer, P. Cloetens:
    "Three-dimensional study of Ni aluminides in an AlSi12 alloy by means of light optical and synchrotron microtomography";
    Acta Materialia, 57 (2009), 4125 - 4132.

  29. Authors: Zahid Asghar, E308-D; Guillermo Requena, E308-D; Frank Kubel, E164-05-1

    Z. Asghar, G. Requena, F. Kubel:
    "The role of Ni and Fe aluminides on the elevated temperature strength of an AlSi12 alloys";
    Materials Science and Engineering A, 527 (2010), 5691 - 5698.

  30. Authors: Zahid Asghar, E308-D; Guillermo Requena, E308-D; G.H. Zahid; R. Rafi-Ud-Din

    Z. Asghar, G. Requena, G. Zahid, R. Rafi-Ud-Din:
    "Effect of thermally stable Cu- and Mg-rich aluminides on the high temperature strength of an AlSi12CuMgNi alloy";
    Materials Characterization, 88 (2014), 80 - 85.

    More information

  31. Authors: K. Aßmus; W. Hübner; Anke Pyzalla, E308-P; H. Pinto, E308-P

    K. Aßmus, W. Hübner, A. Pyzalla, H. Pinto:
    "Die Entwicklung des Gefüges in der Verschleißspur bei Gleitverschleiß von FeCrNi-Legierungen";
    Tribologie und Schmierungstechnik, 51 (2004), 3; 30 - 33.

  32. Authors: N. Babscan; Dietmar Leitlmeier; Hans-Peter Degischer, E308-D

    N. Babscan, D. Leitlmeier, H.P. Degischer:
    "Foamability of Particle Reinforced Aluminium Melts";
    Materialwissenschaften und Werkstofftechnik, 34 (2003), 22 - 29.

  33. Authors: N. Babscan; Dietmar Leitlmeier; Hans-Peter Degischer, E308-D; John Banhart, HMI Berlin

    N. Babscan, D. Leitlmeier, H.P. Degischer, J. Banhart:
    "The Role of Oxidation in Blowing Particle-Stabilised Aluminium Foams";
    Advanced Materials, 6 (2004), 6; 421 - 428.

  34. Authors: Andrea Bachmaier; Georg Benedikt Rathmayr; Matthias Bartosik, E308-GrMayrh; Daniel Apel; Zaoli Zhang; R. Pippan

    A. Bachmaier, G. Rathmayr, M. Bartosik, D. Apel, Z. Zhang, R. Pippan:
    "New insights on the formation of supersaturated solid solutions in the Cu-Cr system deformed by high-pressure torsion";
    Acta Materialia, 69 (2014), 301 - 313.

  35. Authors: M. Bahmani-Oskooee, Sahand Universit ...; S. Hossein Nedjad, TU Sahand; A. Samadi, TU Sahand; Ernst Kozeschnik, E308-Gr Kozesch

    M. Bahmani-Oskooee, S. Hossein Nedjad, A. Samadi, E. Kozeschnik:
    "Cu-bearing, martensitic stainless steels for applications in biological environments";
    Materials & Design, 130 (2017), 442 - 451.

  36. Authors: Martin Balog; Juraj Nagy; Frantisek Simancik; Karol Izdinsky; Guillermo Requena, E308-D

    M. Balog, J. Nagy, F. Simancik, K. Izdinsky, G. Requena:
    "HEAT RESISTANT ULTRA-FINE GRAINED Al PROFILES";
    Reviews on Advanced Materials Science, 18 (2008), 415 - 421.

    More information

  37. Authors: Martin Balog; Cecilia Poletti, E308-D; Frantisek Simancik; Martin Walcher, NMD; Walter Rajner, NMD

    M. Balog, C. Poletti, F. Simancik, M. Walcher, W. Rajner:
    "The effect of native Al2O3 skin disruptionon properties of fine Al powder compacts";
    Journal of Alloys and Compounds, 509 (2011), 509; 235 - 238.

    More information

  38. Authors: Martin Balog; Frantisek Simancik; O Bajana; Guillermo Requena, E308-D

    M. Balog, F. Simancik, O. Bajana, G. Requena:
    "ECAP vs. direct extrusion-Techniques for consolidation of ultra-fine Al particles";
    Materials Science and Engineering A, 504 (2009), 1-2; 1 - 7.

    More information

  39. Authors: Pere Barriobero Vila, E308-Requena; Joachim Gussone; Jan Haubrich; Stefanie Sandlöbes; Julio Cesar da Silva; Peter Cloetens, ESRF-Grenoble; Norbert Schell; Guillermo Requena, E308-D

    P. Barriobero Vila, J. Gussone, J. Haubrich, S. Sandlöbes, J. da Silva, P. Cloetens, N. Schell, G. Requena:
    "Inducing Stable α + β Microstructures during Selective Laser Melting of Ti-6Al-4V Using Intensified Intrinsic Heat Treatments";
    Materials, 10 (2017), 268; 1 - 15.

    More information

  40. Authors: Pere Barriobero Vila, E308-Requena; Guillermo Requena, E308-D; Thomas Buslaps, ESRF; Matthias Alfeld, DESY; Ulrike Boesenberg, DESY

    P. Barriobero Vila, G. Requena, T. Buslaps, M. Alfeld, U. Boesenberg:
    "Role of element partitioning on the α-β phase transformation kinetics of a bi-modal Ti-6Al-6V-2Sn alloy during continuous heating";
    Journal of Alloys and Compounds, 626 (2015), 330 - 339.

    More information

  41. Authors: Pere Barriobero Vila, E308-Requena; Guillermo Requena, E308-D; Sabine Schwarz, E057B; Fernando Warchomicka, TU Graz; Thomas Buslaps, ESRF

    P. Barriobero Vila, G. Requena, S. Schwarz, F. Warchomicka, T. Buslaps:
    "Influence of phase transformation kinetics on the formation of α in a β-quenched Ti-5Al-5Mo-5V-3Cr-1Zr alloy";
    Acta Materialia, 95 (2015), 90 - 101.

    More information

  42. Authors: Pere Barriobero Vila, E308-Requena; Guillermo Requena, E308-D; Fernando Warchomicka, TU Graz; Andreas Stark; Norbert Schell; Thomas Buslaps, ESRF

    P. Barriobero Vila, G. Requena, F. Warchomicka, A. Stark, N. Schell, T. Buslaps:
    "Phase transformation kinetics during continuous heating of a β-quenched Ti-10V-2Fe-3Al alloy";
    Journal of Materials Science, 50 (2015), 3; 1412 - 1426.

    More information

  43. Authors: Michael H. Bartl; Stefan P. Puls; Jing Tang; Helga C. Lichtenegger, E308-S; Galen D. Stucky

    M. Bartl, S. Puls, J. Tang, H. Lichtenegger, G. D. Stucky:
    "Cubic Mesoporous Frameworks with a Mixed Semiconductor Nanocrystalline Wall Structure and Enhanced Sensitivity to Visible Light";
    Angewandte Chemie - International Edition, 43 (2004), 3037 - 3040.

  44. Authors: Matthias Bartosik, E308-GrMayrh; Mirjam Arndt, Balzers; Richard Rachbauer; Christina Krywka; Christian Martin Koller, E308-GrMayrh; Jozef Keckes, MUL; Paul Heinz Mayrhofer, E308-GrMayrh

    M. Bartosik, M. Arndt, R. Rachbauer, C. Krywka, C.M. Koller, J. Keckes, P.H. Mayrhofer:
    "Cross-sectional X-ray nano-diffraction and -reflectivity analysis of multilayered AlTiN-TiSiN thin films: Correlation between residual strain and bi-layer period";
    Scripta Materialia, 107 (2015), 153 - 156.

    More information

  45. Authors: Matthias Bartosik, E308-GrMayrh; Helmut J. Böhm, E317-01; Christina Krywka; Zaoli Zhang; Paul Heinz Mayrhofer, E308-GrMayrh

    M. Bartosik, H. J. Böhm, C. Krywka, Z. Zhang, P.H. Mayrhofer:
    "Influence of Phase Transformation on the Damage Tolerance of Ti-Al-N Coatings";
    Vacuum, 155 (2018), 153 - 157.

    More information

  46. Authors: Matthias Bartosik, E308-GrMayrh; Rostislav Daniel; Christian Mitterer; Igor Matko; Manfred Burghammer; Paul Heinz Mayrhofer, E308-GrMayrh; Jozef Keckes, MUL

    M. Bartosik, R. Daniel, C. Mitterer, I. Matko, M. Burghammer, P.H. Mayrhofer, J. Keckes:
    "Cross-sectional X-ray nanobeam diffraction analysis of a compositionally graded CrNx thin film";
    Thin Solid Films, 542 (2013), 1 - 4.

    More information

  47. Authors: Matthias Bartosik, E308-GrMayrh; Rainer Hahn, E308-GrMayrh; Zaoli Zhang; I Ivanov; Mirjam Arndt, Balzers; Peter Polcik, Plansee; Paul Heinz Mayrhofer, E308-GrMayrh

    M. Bartosik, R Hahn, Z. Zhang, I. Ivanov, M. Arndt, P. Polcik, P.H. Mayrhofer:
    "Fracture toughness of Ti-Si-N thin films";
    International Journal of Refractory Metals & Hard Materials, 72 (2018), 78 - 82.

  48. Authors: Matthias Bartosik, E308-GrMayrh; David Holec, E308-GrMayrh; Daniel Apel; Manuela Klaus; Ch. Genzel; Jozef Keckes, MUL; Mirjam Arndt, Balzers; Peter Polcik, Plansee; Christian Martin Koller, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh

    M. Bartosik, D. Holec, D. Apel, M. Klaus, C. Genzel, J. Keckes, M. Arndt, P. Polcik, C.M. Koller, P.H. Mayrhofer:
    "Thermal expansion of Ti-Al-N and Cr-Al-N coatings";
    Scripta Materialia, 127 (2017), 182 - 185.

    More information

  49. Authors: Matthias Bartosik, E308-GrMayrh; Jozef Keckes, MUL; Per Persson; Helmut Riedl, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh

    M. Bartosik, J. Keckes, P.O.A. Persson, H. Riedl, P.H. Mayrhofer:
    "Interface controlled microstructure evolution in nanolayered thin films";
    Scripta Materialia, 123 (2016), 123; 13 - 16.

    More information

  50. Authors: Matthias Bartosik, E308-GrMayrh; Clément Rumeau, E308-GrMayrh; Rainer Hahn, E308-GrMayrh; Zaoli Zhang; Paul Heinz Mayrhofer, E308-GrMayrh

    M. Bartosik, C. Rumeau, R Hahn, Z. Zhang, P.H. Mayrhofer:
    "Fracture toughness and structural evolution in the TiAlN system upon annealing";
    Scientific Reports, 7 (2017), 16476; 1 - 9.

    More information

  51. Authors: Matthias Bartosik, E308-GrMayrh; Melanie Todt, E317-01; David Holec, MU Leoben; Juraj Todt; Zehua Zhang, MUL; Liangcai Zhou, E308-GrMayrh; Helmut Riedl, E308-GrMayrh; Helmut J. Böhm, E317-01; Franz G. Rammerstorfer, E317-01; Paul Heinz Mayrhofer, E308-GrMayrh

    M. Bartosik, M. Todt, D. Holec, J. Todt, Z. Zhang, L. Zhou, H. Riedl, H. J. Böhm, F. G. Rammerstorfer, P.H. Mayrhofer:
    "Thermal Expansion of Rock-Salt Cubic AlN";
    Applied Physics Letters, 107 (2015), 071602.

    More information

  52. Authors: Stefan Baudis, E163-02-1; Daniel Bomze, E163-02-1; Marica Markovic, E308-S; Peter Gruber, E308-S; Aleksandr Ovsianikov, E308; Robert Liska, E163-02-1

    S. Baudis, D. Bomze, M. Markovic, P. Gruber, A. Ovsianikov, R. Liska:
    "Modular Material System for the Microfabrication of Biocompatible Hydrogels Based on Thiol-Ene-Modified Poly(vinyl alcohol)";
    Journal of Polymer Science Part A: Polymer Chemistry, 54 (2016), 13; 2060 - 2070.

    More information

  53. Authors: Stefan Baudis, E163-02-1; Christian Heller, E308-S; Robert Liska, E163-02-1; Jürgen Stampfl, E308-S; Helga Bergmeister, Meduni Wien; Günther Weigel, Meduni Wien

    S. Baudis, C. Heller, R. Liska, J. Stampfl, H. Bergmeister, G. Weigel:
    "(Meth)acrylate-based photoelastomers as tailored biomaterials for artificial vascular grafts";
    Journal of Polymer Science Part A: Polymer Chemistry, 47 (2009), 10; 2664 - 2676.

    More information

  54. Authors: Stefan Baudis, E163-02-1; Franziska Nehl, E163-02-1; Samuel Ligon, E163-02-1; Anneliese Nigisch, Med-Uni Wien; Helga Bergmeister, MedUni Wien; David Bernhard, Med-Uni Wien; Jürgen Stampfl, E308-S; Robert Liska, E163-02-1

    S. Baudis, F. Nehl, S. Ligon, A. Nigisch, H. Bergmeister, D. Bernhard, J. Stampfl, R. Liska:
    "Elastomeric degradable biomaterials by photopolymerization-based CAD-CAM for vascular tissue engineering";
    Biomedical Materials, 6 (2011), 5.

  55. Authors: Stefan Baudis, E163-02-1; Bernhard Steyrer, TGM Wien; Thomas Pulka, TGM Wien; Harald Wilhelm, TGM Wien; Günter Weigel, MedUni Wien; Helga Bergmeister, MedUni Wien; Jürgen Stampfl, E308-S; Robert Liska, E163-02-1

    S. Baudis, B. Steyrer, T. Pulka, H. Wilhelm, G. Weigel, H. Bergmeister, J. Stampfl, R. Liska:
    "Photopolymerizable Elastomers for Vascular Tissue Regeneration";
    Macromolecular Symposia, 296 (2010), 1; 121 - 126.

    More information

  56. Authors: Stephan Benedikt, E163-02-1; Jieping Wang, ETH Zürich; Marica Markovic, E308-S; Norbert Moszner, Ivoclar Vivadent; Kurt Dietliker; Aleksandr Ovsianikov, E308-S; Hansjörg Grützmacher, ETH Zürich; Robert Liska, E163-02-1

    S. Benedikt, J. Wang, M. Markovic, N. Moszner, K. Dietliker, A. Ovsianikov, H. Grützmacher, R. Liska:
    "Highly efficient water-soluble visible light photoinitiators";
    Journal of Polymer Science Part A: Polymer Chemistry, 53 (2015), 24.

  57. Authors: H Berns; Anke Pyzalla, E308-P

    H. Berns, A. Pyzalla:
    "Microstructure and Residual Stresses of Stainless Steels Case Hardened with Nitrogen";
    Surface Engineering, 20 (2004), 6; 459 - 463.

  58. Authors: Henrik Birkedal; Rashda Khan; Nelle Slack; Chris Broomell; Helga C. Lichtenegger, E308-S; Frank Zok; J.H. Waite

    H. Birkedal, R. Khan, N. Slack, C. Broomell, H. Lichtenegger, F. Zok, J.H. Waite:
    "Halogenated Veneers: Protein Cross-Linking and Halogenation in the Jaws of Nereis, a Marine Polychaete Worm";
    ChemBioChem, 7 (2006), 9; 1392 - 1399.

  59. Authors: Helmut J. Böhm, E317-01; Hans-Peter Degischer, E308-D; Wolfgang Lacom

    H. J. Böhm, H.P. Degischer, W. Lacom:
    "Experimental and Theoretical Study of the Thermal Expansion Behavior of Ceramic Fiber Reinforced Aluminium;";
    Composites Engineering, 5 (1995), 1; 37 - 49.

    More information

  60. Authors: P. Bohaty; B. Vlach; Sabine Seidler, E308-S; Thomas Koch, E308-S; E. Nezbedov

    P. Bohaty, B. Vlach, S. Seidler, T. Koch, E. Nezbedov:
    "Essential Work of Fracture and the Phase Transformation in β-IPP";
    Journal of Macromolecular Science, Part B - Physics (2002), Vol. B41, Nos. 4-6; 657 - 669.

  61. Authors: Daniel Bomze, E163-02-1; Patrick Knaack, E163-02-1; Thomas Koch, E308-S; Huifei Jin, Delft University ...; Robert Liska, E163-02-1

    D. Bomze, P. Knaack, T. Koch, H. Jin, R. Liska:
    "Radical induced cationic frontal polymerization as a versatile tool for epoxy curing and composite production";
    Journal of Polymer Science Part A: Polymer Chemistry, 54 (2016), 23; 3751 - 3759.

    More information

  62. Authors: Alexander Hansen Bork, ETH Zürich; Erwin Povoden-Karadeniz, E308-Gr Kozesch; Jennifer Rupp, ETH Zürich

    A.H. Bork, E. Povoden-Karadeniz, J.L.M. Rupp:
    "Modeling thermochenmical solar-to-fuel conversion: CALPHAD for thermdynamic assessment studies of perovskite, exemplified for (La,Sr)MnO3";
    Advanced Energy Materials, 1601086 (2016).

    More information

  63. Authors: Giovanni Bruno; H. Pinto, E308-P

    G. Bruno, H. Pinto:
    "Precipitation kinetics of γ´ phase in nickel base superalloy SC16: An in situ neutron diffraction study";
    Materials Science and Technology, 19 (2003), 567 - 572.

  64. Authors: Giovanni Bruno; G. Schumacher; H. Pinto, E308-P; C. Schulze

    G. Bruno, G. Schumacher, H. Pinto, C. Schulze:
    "Measurement of the Littice Misfit of the Nickel-Base Superalloy SC16 by High-Energy Synchrotron Radiation";
    Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 34A (2003), 193 - 197.

  65. Authors: Mariano Bruno; Gustavo Cotella; Maria Miras; Thomas Koch, E308-S; Sabine Seidler, E308-S; Cesar Barbero

    M.M. Bruno, N.G. Cotella, M.C. Miras, T. Koch, S. Seidler, C Barbero:
    "Characterization of monolithic porous carbon prepared from resorcinol/formaldehyde gels with cationic surfactant";
    Colloids and Surfaces, A: Physicochemical and Engineering Aspects, 358 (2010), 1-3; 13 - 20.

    More information

  66. Authors: Bruno Buchmayr; Jürgen Stampfl, E308-S

    B. Buchmayr, J. Stampfl:
    "MAMC 2014: Vienna´s Metal AM Conference reports on progress in a rapidly changing industry";
    Metal Additive Manufacturing, 1 (2015), 1; 53 - 60.

    More information

  67. Authors: Katrin Bugelnig, E308; Federico Sket, IMDEA; Holger Germann; Thomas Steffens; Robert Koos, E308-Requena; Fabian Wilde; Elodie Boller; Guillermo Requena, E308-D

    K. Bugelnig, F. Sket, H. Germann, T. Steffens, R. Koos, F. Wilde, E. Boller, G. Requena:
    "Influence of 3D connectivity of rigid phases on damage evolution during tensile deformation of an AlSi12Cu4Ni2 piston alloy";
    Materials Science and Engineering A, 709 (2018), 193 - 202.

  68. Authors: Katrin Bugelnig, E308; Federico Sket, IMDEA; Holger Germann; Thomas Steffens; Fabian Wilde; Elodie Boller; Guillermo Requena, E308-D

    K. Bugelnig, F. Sket, H. Germann, T. Steffens, F. Wilde, E. Boller, G. Requena:
    "3D microstructure and damage accumulation in a cast AlSi12Cu5Ni2 piston alloy as a function of solution treatment";
    e-Journal of NDT, ICT 2016 (2016), 18783; 8 pages.

  69. Authors: Heinrich Buken, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    H. Buken, E. Kozeschnik:
    "A Model for Static Recrystallization with Simultaneous Precipitation and Solute Drag";
    Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 48A (2017), 6; 2812 - 2818.

    More information

  70. Authors: Heinrich Buken, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    H. Buken, E. Kozeschnik:
    "State parameter-based modelling of microstructure evolution in micro-alloyed steel during hot forming";
    IOP Conference Series: Materials Science and Engineering, 119 (2016), 012023; 7 pages.

    More information

  71. Authors: Heinrich Buken, E308-Gr Kozesch; Pavel Sherstnev; Ernst Kozeschnik, E308-Gr Kozesch

    H. Buken, P. Sherstnev, E. Kozeschnik:
    "A state parameter-based model for static recrystallization interacting with precipitation";
    Modelling and Simulation in Materials Science and Engineering, 24 (2016), 035006.

    More information

  72. Authors: P Burgholzer; C Hofer; B Reitinger; A. Mohammed, E308-D; Hans-Peter Degischer, E308-D; D Loidl; P. Schulz

    P Burgholzer, C Hofer, B Reitinger, A. Mohammed, H.P. Degischer, D Loidl, P. Schulz:
    "Non-contact determination of elastic moduli of continuous fiber reinforced metals";
    Composites Science and Technology, 65 (2005), 301 - 306.

  73. Authors: Denijel Burzic, E308-Gr Kozesch; Jörg Zamberger; Ernst Kozeschnik, E308-Gr Kozesch

    D. Burzic, J. Zamberger, E. Kozeschnik:
    "Non-destructive evaluation of decarburization of spring steel using electromagnetic measurement";
    Nondestructive Testing And Evaluation, 43 (2010), 446 - 450.

  74. Authors: Bernhard Busetti, E308-S; Bernhard Steyrer, E308-S; Bernhard Lutzer, E362; Rafael Reiter, E136; Jürgen Stampfl, E308-S

    B. Busetti, B. Steyrer, B. Lutzer, R. Reiter, J. Stampfl:
    "A hybrid exposure concept for lithography-based additive manufacturing";
    Additive Manufacturing, Volume 21 (2018), 21; 413 - 421.

    More information

  75. Authors: E. Cabrol; C. Bellot; P. Lamesle; D. Delagnes; Erwin Povoden-Karadeniz, E308-Gr Kozesch

    E. Cabrol, C. Bellot, P. Lamesle, D. Delagnes, E. Povoden-Karadeniz:
    "Experimental investigation and thermodynamic modeling of molybdenum and vanadium-containing carbide hardened iron-based alloys";
    Journal of Alloys and Compounds, 556 (2013), 203 - 209.

  76. Authors: Anja Cakara, E164-01-2; Maximilian Bonta, E164-01-2; Helmut Riedl, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh; Andreas Limbeck, E164-01-2

    A. Cakara, M. Bonta, H. Riedl, P.H. Mayrhofer, A. Limbeck:
    "Development of a multi-variate calibration approach for quantitative analysis of oxidation resistant Mo-Si-B coatings using laser ablation inductively coupled plasma mass spectrometry";
    Spectrochimica Acta Part B, 120 (2016), 57 - 62.

    More information

  77. Authors: Sung Chul Cha, Hyundai Motor Gr ...; Seung-Hyun Hong, Hyundai Motor Gr ...; Myung-Yeon Kim, High Temperature ...; Jihye Park, High Temperature ...; Woo-Sang Jung, High Temperature ...; Markus Rath, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    S. Cha, S. Hong, M. Kim, J. Park, W. Jung, M. Rath, E. Kozeschnik:
    "CALPHAD-based alloy design for advanced automotive steels - Part II: Compositional and microstructural modification for advanced carburizing steels";
    CALPHAD - Computer Coupling of Phase Diagrams and Thermochemistry, 54 (2016), 172 - 180.

    More information

  78. Authors: Vipin Chawla; David Holec, MU Leoben; Paul Heinz Mayrhofer, E308-GrMayrh

    V. Chawla, D. Holec, P.H. Mayrhofer:
    "Stabilization criteria for cubic AlN in TiN/AlN and CrN/AlN bi-layer systems";
    Journal of Physics D: Applied Physics, 46 (2013), 045305; 1 - 8.

  79. Authors: Vipin Chawla; David Holec, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh

    V. Chawla, D. Holec, P.H. Mayrhofer:
    "The effect of interlayer composition and thickness on the stabilization of cubic AlN in AlN/Ti-Al-N superlattices";
    Thin Solid Films, 565 (2014), 94 - 100.

  80. Authors: Klaus Cicha, E308-S; Thomas Koch, E308-S; Jan Torgersen, E308-S; Li Zhiquan, E163-02-1; Robert Liska, E163-02-1; Jürgen Stampfl, E308-S

    K. Cicha, T. Koch, J. Torgersen, L. Zhiquan, R. Liska, J. Stampfl:
    "Young´s modulus measurement of two-photon polymerized microcantilevers by using nanoindentation equipment";
    Journal of Applied Physics, 112 (2012), 094906.

    More information

  81. Authors: Klaus Cicha, E308-S; Zhiquan Li, E163-02-1; Klaus Stadlmann, E308-S; Aleksandr Ovsianikov, E308-S; Ruth Markut-Kohl, E308-S; Robert Liska, E163-02-1; Jürgen Stampfl, E308-S

    K. Cicha, Z. Li, K. Stadlmann, A. Ovsianikov, R. Markut-Kohl, R. Liska, J. Stampfl:
    "Evaluation of 3D structures fabricated with two-photon-photopolymerization by using FTIR spectroscopy";
    Journal of Applied Physics, 110 (2011), 064911; 1 - 5.

    More information

  82. Authors: Paolo Colombo, Uni Padua; Hans-Peter Degischer, E308-D

    P. Colombo, H.P. Degischer:
    "Highly porous metals and ceramics";
    Materials Science and Technology (invited), 26 (2010), 10; 1145 - 1158.

  83. Authors: Raffaele Alberto Coppeta, E360; David Holec, E308-GrMayrh; Hajdin Ceric, E360; Tibor Grasser, E360

    R. Coppeta, D. Holec, H. Ceric, T. Grasser:
    "Evaluation of Dislocation Energy in Thin Films";
    Philosophical Magazine, 95 (2015), 2; 186 - 209.

    More information

  84. Authors: S. Corkovic; Anke Pyzalla, E308-P

    S. Corkovic, A. Pyzalla:
    "In-situ Stress Analyses during High Temperature Oxidation of Mild Steel and Grey Cast Iron";
    Materials and Corrosion, 55 (2004), 5; 341 - 351.

  85. Authors: José Crespo, E308-D; Guillermo Requena, E308-D; Hans-Peter Degischer, E308-D; Kurt Track, +GF+; Domonkos Tolnai, E308-D

    J. Crespo, G. Requena, H.P. Degischer, K. Track, D. Tolnai:
    "Three-dimensional characterisation of micropores and graphite nodules in ductile cast iron";
    International Foundry Research, 65 (2013), 3; 24 - 30.

    More information

  86. Authors: Valentin Dalbauer, E308-GrMayrh; Jürgen Ramm; Szilárd Kolozsvári, Plansee; Christian Martin Koller, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh

    V. Dalbauer, J. Ramm, S. Kolozsvári, C.M. Koller, P.H. Mayrhofer:
    "On the phase evolution of arc evaporated Al-Cr-based intermetallics and oxides";
    Thin Solid Films, 644 (2017), Volume 644; 120 - 128.

    More information

  87. Authors: Valentin Dalbauer, E308-GrMayrh; Jürgen Ramm; Szilárd Kolozsvári, Plansee; Valentina Paneta, Uppsala University; Christian Martin Koller, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh

    V. Dalbauer, J. Ramm, S. Kolozsvári, V. Paneta, C.M. Koller, P.H. Mayrhofer:
    "...On the phase formation of cathodic arc evaporated Al1−xCrx-based intermetallic coatings and substoichiometric oxides";
    Surface & Coatings Technology, 352 (2018), 352; 392 - 398.

  88. Authors: Adrian De Blas Romero; Markus Pfaffinger, E308-S; Gerald Mitteramskogler, E308-S; Martin Schwentenwein; Christoph Jellinek, Lithoz GmbH; Johannes Homa, E308-S; Andres Diaz Lantada, UPM; Jürgen Stampfl, E308-S

    A. De Blas Romero, M. Pfaffinger, G. Mitteramskogler, M. Schwentenwein, C. Jellinek, J. Homa, A. Diaz Lantada, J. Stampfl:
    "Lithography-based additive manufacture of ceramic biodevices with design-controlled surface topographies";
    International Journal Of Advanced Manufacturing Technology, Online (2016), 1 - 9.

    More information

  89. Authors: Hans-Peter Degischer, E308-D; Fernando Lasagni, E308-D

    H.P. Degischer, F. Lasagni:
    "Enhanced Young's Modulus of Al-Si Alloys and Reinforced Matrices by Co-continuous Structures";
    Journal of Composite Materials, Vol. 44 (2010), 6; 739 - 755.

    More information

  90. Authors: S. Dépinoy; Catherine Toffolon-Masclet; Stephane Urvoy; B. Marini, CEA Saclay; Francois Roch; Ernst Kozeschnik, E308-Gr Kozesch; A-F. Gourgues-Lorenzon

    S. Dépinoy, C. Toffolon-Masclet, S. Urvoy, B. Marini, F. Roch, E. Kozeschnik, A. Gourgues-Lorenzon:
    "Carbide Precipitation in 2.25 Cr-1 Mo Bainitic Steel: Effect of Heating and Isothermal Tempering Conditions";
    Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 48 (2017), 5; 2164 - 2178.

  91. Authors: S. Dieter; Anke Pyzalla, E308-P; Andreas Bauer; N. Schell; J. McCord; K. Seemann; N. Wanderka; W. Reimers, TU Berlin

    S. Dieter, A. Pyzalla, A. Bauer, N. Schell, J. McCord, K. Seemann, N. Wanderka, W. Reimers:
    "Correlation between magnetic properties of CoFe single and CoFe/SiO2 multi-layer thin films and their microstructure, texture and internal stress state";
    Zeitschrift für Metallkunde, 95 (2004), 3; 164 - 175.

  92. Authors: Martina Dikovits, TU Graz; Cecilia Poletti, TU Graz; Fernando Warchomicka, E308-D

    M. Dikovits, C. Poletti, F. Warchomicka:
    "Deformation Mechanisms in the Near-β Titanium Alloy Ti-55531";
    Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 45 (2014), 3; 1586 - 1596.

  93. Authors: Agnes Dobos, E308-S; Wolfgang Steiger, E308-S; Dominik Theiner, E387; Peter Gruber, E308-S; Markus Lunzer, E163-03-2; Jasper Van Hoorick, Polymer Chemistr ...; Sandra Van Vlierberghe, Polymer Chemistr ...; Aleksandr Ovsianikov, E308-S

    A. Dobos, W. Steiger, D Theiner, P. Gruber, M. Lunzer, J. Van Hoorick, S. Van Vlierberghe, A. Ovsianikov:
    "Screening of two-photon activated photodynamic therapy sensitizers using a 3D osteosarcoma model";
    Analyst, (*) (2019).

  94. Authors: Mark Dolezal, E308-D; Hans-Peter Degischer, E308-D

    M. Dolezal, H.P. Degischer:
    "Damping behaviour of cellular aluminium compared to some commercial aluminium alloys";
    Internationale Fachzeitschrift Aluminium, 79 (2003), 4; 304 - 310.

  95. Authors: Bernadette Duscher, E308-S; Alois Schausberger

    B. Duscher, A. Schausberger:
    "Influence of processing on the flow properties of long-chain branched polypropylene";
    Polymer Engineering and Science, 58 (2018), 9; 1596 - 1603.

    More information

  96. Authors: Claudia Dworak, E163-02-1; Thomas Koch, E308-S; Franz Varga, Osteology; Robert Liska, E163-02-1

    C. Dworak, T. Koch, F. Varga, R. Liska:
    "Photopolymerization of biocompatible Phosphorus-containing Vinyl esters and Vinyl carbamates";
    Journal of Polymer Science Part A: Polymer Chemistry, 13 (2010), 48; 2916 - 2924.

  97. Authors: Holger Euchner, E308-GrMayrh; Marc de Boissieu

    H. Euchner, M. de Boissieu et al.:
    "Lattice dynamics of the icosahedral quasicrystals i-ZnMgSc and i-ZnAgSc and the cubic 1/1-approximant Zn6Sc";
    Journal of Physics: Condensed Matter, 26 (2014), 5; 1 - 7.

    More information

  98. Authors: Holger Euchner, E308-GrMayrh; Marc de Boissieu; Tsunetomo Yamada

    H. Euchner, M. de Boissieu, T. Yamada et al.:
    "Tetrahedron dynamics in the icosahedral quasicrystals i-MgZnSc and i-AgZnSc.";
    Journal of Physics: Condensed Matter, 25 (2013), 115405.

  99. Authors: Holger Euchner, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh

    H. Euchner, P.H. Mayrhofer:
    "Designing thin film materials - ternary borides from first principles";
    Thin Solid Films, 583 (2015), 46 - 49.

  100. Authors: Holger Euchner, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh

    H. Euchner, P.H. Mayrhofer:
    "Vacancy dependent stability of cubic and wurtzite Ti1-xAlxN";
    Surface & Coatings Technology, 275 (2015), 214 - 218.

  101. Authors: Holger Euchner, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh; Helmut Riedl, E308-GrMayrh; Fedor Klimashin, E308-GrMayrh; Andreas Limbeck, E164-01-2; Peter Polcik, Plansee; Szilárd Kolozsvári, Plansee

    H. Euchner, P.H. Mayrhofer, H. Riedl, F. Klimashin, A. Limbeck, P. Polcik, S. Kolozsvári:
    "Solid solution hardening of vacancy stabilized TixW1−xB2";
    Acta Materialia, 101 (2015), 55 - 61.

  102. Authors: Holger Euchner, E308-GrMayrh; Stephane Pailhès, University Lyon, ...; Tsunetomo Yamada; Ryuji Tamura; Tsutomu Ishimasa; S. Rols; Helmut Schober, Institut Laue-La ...; M. Mihalkovic; Hans-Rainer Trebin; Daniel Schopf; Silke Paschen, E138-04

    H. Euchner, S. Pailhès, T. Yamada, T. Tamura, I. Ishimasa, S. Rols, H. Schober, M. Mihalkovic, H. Trebin, D. Schopf, S. Paschen et al.:
    "Atomic Dynamics in Complex Metallic"";
    MRS Proceedings, 1517 (2013).

  103. Authors: Ahmad Falahati, E308-Gr Kozesch; Wu Jun; Peter Lang, E308-Gr Kozesch; Mohammad Reza Ahmadi, E308-Gr Kozesch; Erwin Povoden-Karadeniz, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    A. Falahati, W. Jun, P. Lang, M.R. Ahmadi, E. Povoden-Karadeniz, E. Kozeschnik:
    "Assessment of parameters for precipitation simulation of heat treatable aluminum alloys using differential scanning calorimetry";
    Transactions of Nonferrous Metals Society of China, 24 (2014), 2157 - 2167.

    More information

  104. Authors: Ahmad Falahati, E308-D; Erwin Povoden-Karadeniz, E308-Gr Kozesch; Peter Lang, E308-Gr Kozesch; Piotr Warczok, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    A. Falahati, E. Povoden-Karadeniz, P. Lang, P. Warczok, E. Kozeschnik:
    "Thermo-kinetic computer simulation of differential scanning calorimetry curves of AlMgSi alloys";
    International Journal of Materials Research, Vol. 101 (2010), 9; 1089 - 1096.

    More information

  105. Authors: Ahmad Falahati, E308-D; Sven Wode

    A. Falahati, S. Wode:
    "Two dimensional thermography analysis of temperature distributions of samples in gleeble machine";
    MP Materials Testing - Materials and Components, Technology and Application, 51 (2008), 03; 126 - 132.

    More information

  106. Authors: J.D. Farren; A.H. Hunter; J.N. Dupont; C.V. Robino; Ernst Kozeschnik, E308-Gr Kozesch; D.N. Seidman

    J. Farren, A. Hunter, J. Dupont, C. Robino, E. Kozeschnik, D. Seidman:
    "Microstructural Evolution and Mechanical Properties of Simulated Heat-Affected Zones in an Iron-Copper Based Multicomponent Steel";
    Welding Journal, 92 (2013), 5; 140 - 147.

    More information

  107. Authors: J.D. Farren; A.H. Hunter; J.N. Dupont; D.N. Seidman; C.V. Robino; Ernst Kozeschnik, E308-Gr Kozesch

    J. Farren, A. Hunter, J. Dupont, D. Seidman, C. Robino, E. Kozeschnik:
    "Microstructural Evolution and Mechanical Properties of Fusion Welds in an Iron-Copper-Based Multicomponent Steel";
    Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 43A (2012), 4155 - 4170.

    More information

  108. Authors: Katy Faure, E308-D; Brigitte Kriszt, E308-D

    K. Faure, B. Kriszt:
    "Charakterisierung der Zellstruktur von metallischen Schäumen";
    Praktische Metallographie - Practical Metallography, 40 (2003), 11; 537 - 555.

  109. Authors: Ruth Felzmann, E308-S; Simon Gruber, E308-S; Gerald Mitteramskogler, E308-S; Passakorn Tesavibul, E308-S; Aldo Boccaccini, University of Er ...; Robert Liska, E163-02-1; Jürgen Stampfl, E308-S

    R. Felzmann, S. Gruber, G. Mitteramskogler, P. Tesavibul, A. Boccaccini, R. Liska, J. Stampfl:
    "Lithography-based Additive Manufacturing of Cellular Ceramic Structures";
    Advanced Engineering Materials, 14 (2012), 1052 - 1058.

    More information

  110. Authors: Franz Dieter Fischer, Universität Leoben; Jiri Svoboda, Academy of Scien ...; Thomas Antretter, MUL; Ernst Kozeschnik, E308-Gr Kozesch

    F. Fischer, J. Svoboda, T. Antretter, E. Kozeschnik:
    "Relaxation of a precipitate misfit stress state by creep in the matrix";
    International Journal of Plasticity, 64 (2015), 164 - 176.

    More information

  111. Authors: Franz Dieter Fischer, MU Leoben; Jiri Svoboda, Academy of Scien ...; Thomas Antretter, MUL; Ernst Kozeschnik, E308-Gr Kozesch

    F.D. Fischer, J. Svoboda, T. Antretter, E. Kozeschnik:
    "Stress relaxation by power-law creep during growth of a misfitting precipitate";
    International Journal of Solids and Structures, 96 (2016), 74 - 80.

    More information

  112. Authors: Franz Dieter Fischer, MU Leoben; Jiri Svoboda, Academy of Scien ...; Fritz Appel, GKSS, Germany; Ernst Kozeschnik, E308-Gr Kozesch

    F.D. Fischer, J. Svoboda, F. Appel, E. Kozeschnik:
    "Modeling of excess vacancy annihilation at different types of sinks";
    Acta Materialia, 59 (2011), 9; 3463 - 3472.

    More information

  113. Authors: Franz Dieter Fischer, MU Leoben; Jiri Svoboda, Academy of Scien ...; Ernst Kozeschnik, E308-Gr Kozesch

    F.D. Fischer, J. Svoboda, E. Kozeschnik:
    "Interstitial diffusion in systems with multiple sorts of traps";
    Modelling and Simulation in Materials Science and Engineering, 21 (2013), 025008 - 025020.

    More information

  114. Authors: Babak Foroughi; Hans-Peter Degischer, E308-D; Andreas Kottar, E308-D

    B. Foroughi, H.P. Degischer, A. Kottar:
    "Characterization and Simulation of Tensile Deformation of Non-Uniform Cellular Aluminium Until Damage";
    Advanced Engineering Materials, 15 (2013), 4; 276 - 286.

  115. Authors: Christina Fritscher, E165-02; Nicola Hüsing, E165-02; Sigrid Bernstorff; Doris Brandhuber, E165-02; Thomas Koch, E308-S; Sabine Seidler, E308-S; Helga C. Lichtenegger, E308-S

    Ch. Fritscher, N. Hüsing, S. Bernstorff, D. Brandhuber, T. Koch, S. Seidler, H. Lichtenegger:
    "In-situ SAXS study on cationic and non-ionic surfactant liquid crystals using synchrotron radiation.";
    Journal of Synchrotron Radiation, 12 (2005), 717 - 720.

    More information

  116. Authors: Sophie Fröhlich, E164-01-1; V.-M. Archodoulaki, E308-S; Günter Allmaier, E164-01-1; Martina Marchetti-Deschmann, E164-01-1

    S. Fröhlich, V. Archodoulaki, G. Allmaier, M. Marchetti-Deschmann:
    "MALDI-TOF Mass Spectrometry Imaging Reveals Molecular Level Changes in Ultrahigh Molecular Weight Polyethylene Joint Implants in Correlation with Lipid Adsorption";
    Analytical Chemistry, 86 (2014), 9723 - 9732.

    More information

  117. Authors: Sophie Fröhlich, E164-01-1; Victoria Dorrer, E164-01-1; V.-M. Archodoulaki, E308-S; Günter Allmaier, E164-01-1; Martina Marchetti-Deschmann, E164-01-1

    S. Fröhlich, V. Dorrer, V. Archodoulaki, G. Allmaier, M. Marchetti-Deschmann:
    "Synovial Fluid Protein Adsorbtion on Artificial, Polymer-based Hip Joint Material Investigated by MALDI-TOF Mass Spectrometry Imaging";
    EuPA Open Proteomics, 4 (2014), 70 - 80.

    More information

  118. Authors: Stefan Gäbler; Jürgen Stampfl, E308-S; Thomas Koch, E308-S; Sabine Seidler, E308-S; Georg Schüller, LBI Traumatologie; Heinz Redl; Vladimir Juras, AKH; Siegfried Trattnig; Roland Weidisch, Universität Jena

    S. Gäbler, J. Stampfl, T. Koch, S. Seidler, G. Schüller, H. Redl, V. Juras, S. Trattnig, R. Weidisch:
    "Determination of the viscoelastic properties of hydrogels based on polyethylene glycol diacrylate (PEG-DA) and human articular cartilage";
    International Journal of Materials Engineering Innovation, 1 (2009), 1; 3 - 20.

    More information

  119. Authors: Markus Gahleitner; Christelle Grein; Rebecca Blell; Johannes Wolfschwenger; Thomas Koch, E308-S; Elisabeth Ingolic

    M Gahleitner, C Grein, R Blell, J Wolfschwenger, T. Koch, E Ingolic:
    "Sterilization of propylene/ethylene random copolymers: Annealing effects on crystalline structure and transparency as influenced by polymer structure and nucleation";
    Express Polymer Letters, 5 (2011), 9; 788 - 798.

    More information

  120. Authors: Rados Gajic; Friedemar Kuchar; Ronald Meisels; Jelena Radovanovic; Kurt Hingerl; Javad Zarbakhsh; Jürgen Stampfl, E308-S; Alexander Woesz

    R. Gajic, F. Kuchar, R. Meisels, J. Radovanovic, K. Hingerl, J. Zarbakhsh, J. Stampfl, A. Woesz:
    "Physical and materials aspects of photonic crystals for microwaves and millimetre waves";
    Zeitschrift für Metallkunde, 95 (2004), 7; 618 - 623.

  121. Authors: Paul Gauss, E163-02-1; Samuel Ligon, E163-02-1; Markus Griesser, TU-Graz; Christian Gorsche, E163-02-1; Helena Svajdlenková, Polymer Institut ...; Thomas Koch, E308-S; Norbert Moszner, Ivoclar Vivadent; Robert Liska, E163-02-1

    P. Gauss, S. Ligon, M. Griesser, C. Gorsche, H. Svajdlenková, T. Koch, N. Moszner, R. Liska:
    "The influence of vinyl activating groups on β-allyl sulfone based chain transfer agents for tough methacrylate networks";
    Journal of Polymer Science Part A: Polymer Chemistry, 54 (2016), 10; 1417 - 1427.

  122. Authors: Th. Georges; Ch. Hackmair; H.M. Mayer; Anke Pyzalla, E308-P; H Porzner; P Duranton

    T. Georges, C. Hackmair, H. Mayer, A. Pyzalla, H. Porzner, P. Duranton:
    "Modeling Induction Heat Treating of Crankshafts";
    Industrial Heating, http://www.industrialheating.com/CDA/Archives (2004), August.

  123. Authors: W. Gindl; H.S. Gupta; Th. Schöberl; Helga C. Lichtenegger, E308-S; Peter Fratzl

    W. Gindl, H. Gupta, T. Schöberl, H. Lichtenegger, P. Fratzl:
    "Mechanical properties of spruce wood cell walls by nanoindentation";
    Applied Physics A: Materials Science & Processing, 79 (2004), 2069 - 2073.

  124. Authors: Shaun Gittard; Bo Chen; Huadong Xu; Aleksandr Ovsianikov, E308-S; Boris Chichkov, LZH Hannover; Nancy Monteiro-Riviere; Roger Narayan, Joint Department ...

    S. Gittard, B. Chen, H. Xu, A. Ovsianikov, B. Chichkov, N. Monteiro-Riviere, R. Narayan:
    "The effects of geometry on skin penetration and failure of polymer microneedles";
    Journal of Adhesion Science and Technology, 27 (2013), 3; 227 - 243.

    More information

  125. Authors: Stefan Glatz, E308-GrMayrh; Hamid Bolvardi, Oerlikon Balzers; Szilárd Kolozsvári, Plansee; Christian Martin Koller, E308-GrMayrh; Helmut Riedl, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh

    S.A. Glatz, H. Bolvardi, S. Kolozsvári, C.M. Koller, H. Riedl, P.H. Mayrhofer:
    "Arc evaporated W-alloyed Ti-Al-N coatings for improved thermal stability, mechanical, and tribological properties";
    Surface & Coatings Technology, (2017), SCT-22634; 1.

  126. Authors: Stefan Glatz, E308-GrMayrh; Robert Hollerweger, E308-GrMayrh; Peter Polcik, Plansee; Richard Rachbauer; Jörg Ulrich Paulitsch, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh

    S.A. Glatz, R. Hollerweger, P. Polcik, R. Rachbauer, J. Paulitsch, P.H. Mayrhofer:
    "Thermal stability and mechanical properties of arc evaporated Ti-Al-Zr-N hard coatings";
    Surface & Coatings Technology, 266 (2015), 1 - 9.

    More information

  127. Authors: Stefan Glatz, E308-GrMayrh; Christian Martin Koller, E308-GrMayrh; Hamid Bolvardi, Oerlikon Balzers; Szilard Koloszvári, Plansee; Helmut Riedl, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh

    S.A. Glatz, C.M. Koller, H. Bolvardi, S. Koloszvári, H. Riedl, P.H. Mayrhofer:
    "Influence of Mo on the structure and the tribomechanical properties of arc evaporated Ti-Al-N";
    Surface & Coatings Technology, 311 (2017), 330 - 336.

    More information

  128. Authors: Stefan Glatz, E308-GrMayrh; Vincent Moraes, E308-GrMayrh; Christian Martin Koller, E308-GrMayrh; Helmut Riedl, E308-GrMayrh; Hamid Bolvardi, Oerlikon Balzers; Szilárd Kolozsvári, Plansee; Paul Heinz Mayrhofer, E308-GrMayrh

    S.A. Glatz, V. Moraes, C.M. Koller, H. Riedl, H. Bolvardi, S. Kolozsvári, P.H. Mayrhofer:
    "Effect of Mo on the thermal stability, oxidation resistance, and tribo-mechanical properties of arc evaporated Ti-Al-N coatings";
    Journal of Vacuum Science & Technology A, 35 (2017), 6; 061515.

  129. Authors: Thomas Glechner, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh; David Holec, MU Leoben; Stefan Fritze, Uppsala Univeristy; Eric Lewin, Uppsala University; Valentina Paneta, Uppsala University; Daniel Primetzhofer, Department of Ph ...; Szilard Koloszvári, Plansee; Helmut Riedl, E308-GrMayrh

    T. Glechner, P.H. Mayrhofer, D. Holec, S. Fritze, E. Lewin, V. Paneta, D. Primetzhofer, S. Koloszvári, H. Riedl:
    "Tuning structure and mechanical properties of Ta-C coatings by N-alloying and vacancy population";
    Scientific Reports, 8 (2018), 1; 17669 - 17679.

    More information

  130. Authors: Robert Gmeiner, E308-S; Ulrike Deisinger, FAU; Julia-Anna Schönherr, E308-S; Benjamin Lechner, E308-S; Rainer Detsch, FAU; Aldo Boccaccini, University of Er ...; Jürgen Stampfl, E308-S

    R. Gmeiner, U. Deisinger, J.-A. Schönherr, B. Lechner, R. Detsch, A. Boccaccini, J. Stampfl:
    "Additive Manufacturing of Bioactive Glasses and Silicate Bioceramics";
    Journal of Ceramic Science and Technology, 6 (2015), 2; 75 - 86.

    More information

  131. Authors: Robert Gmeiner, E308-S; Gerald Mitteramskogler, E308-S; Jürgen Stampfl, E308-S; Aldo Boccaccini, University of Er ...

    R. Gmeiner, G. Mitteramskogler, J. Stampfl, A. Boccaccini:
    "Stereolithographic Ceramic Manufacturing of High Strength Bioactive Glass";
    International Journal of Applied Ceramic Technology, 12 (2015), 1; 38 - 45.

    More information

  132. Authors: U. Göbel; G. Lefranc; Hans-Peter Degischer, E308-D

    U. Göbel, G. Lefranc, H.P. Degischer:
    "Non-destructive Investigation of AlSi7Mg/SiC70p MMCs by means of Acoustic Scanning Microscopy, X-Ray and Neutron Diffraction";
    Materialwissenschaften und Werkstofftechnik, 34 (2003), 4; 375 - 380.

  133. Authors: Christian Gorsche, E163-02-1; Thomas Koch, E308-S; Norbert Moszner, Ivoclar Vivadent; Robert Liska, E163-02-1

    C. Gorsche, T. Koch, N. Moszner, R. Liska:
    "Exploring the benefits of β-allyl sulfones for more homogeneous dimethacrylate photopolymer networks";
    Polymer Chemistry, 6 (2015), 2038 - 2047.

  134. Authors: Christian Gorsche, E163-02-1; Christoph Schnöll, E163-02-1; Thomas Koch, E308-S; Norbert Moszner, Ivoclar Vivadent; Robert Liska, E163-02-1

    C. Gorsche, C. Schnöll, T. Koch, N. Moszner, R. Liska:
    "Debonding on Demand with Highly Cross-​Linked Photopolymers: A Combination of Network Regulation and Thermally Induced Gas Formation";
    Macromolecules, 51 (2018), 3; 660 - 669.

    More information

  135. Authors: Christian Gorsche, E163-02-1; Konstanze Seidler, E163-02-1; Patrick Knaack, E163-02-1; Peter Dorfinger, E308-S; Thomas Koch, E308-S; Jürgen Stampfl, E308-S; Norbert Moszner, Ivoclar Vivadent; Robert Liska, E163-02-1

    C. Gorsche, K. Seidler, P. Knaack, P. Dorfinger, T. Koch, J. Stampfl, N. Moszner, R. Liska:
    "Rapid formation of regulated methacrylate networks yielding tough materials for lithography-​based 3D printing";
    Polymer Chemistry, 7 (2016), 11; 2009 - 2014.

    More information

  136. Authors: Christian Gorsche, E163-02-1; Konstanze Seidler, E163-02-1; Harikrishna Reghunathan, E163-02-1; Markus Kury, E163-02-1; Thomas Koch, E308-S; Norbert Moszner, Ivoclar Vivadent; Robert Liska, E163-02-1

    C. Gorsche, K. Seidler, H. Reghunathan, M. Kury, T. Koch, N. Moszner, R. Liska:
    "Difunctional vinyl sulfonate esters for the fabrication of tough methacrylate-​based photopolymer networks";
    Polymer, 158 (2018), 149 - 157.

    More information

  137. Authors: W. Grellmann; R. Lach; Sabine Seidler, E308-S

    W. Grellmann, R. Lach, S. Seidler:
    "Experimental Determination of Geometry-Independent Fracture Mechanics Values J, CTOD and K for Polymers";
    International Journal of Fracture, Letters in Fracture and Micromechanics, 118 (2002), 1; 9 - 14.

  138. Authors: Simon Großeiber, E308-Gr Kozesch; Sergiu Ilie, voestalpine AG; Cecilia Poletti, TU Graz; Bernhard Harrer, FH OÖ F&E GmbH; Hans-Peter Degischer, E308-D

    S. Großeiber, S. Ilie, C. Poletti, B. Harrer, H.P. Degischer:
    "Influence of Strain Rate on Hot Ductility of a V-Microalloyed Steel Slab";
    Steel Research International, 83 (2012), 5; 445 - 455.

    More information

  139. Authors: Xunlong Gu; Zaoli Zhang; Matthias Bartosik, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh; Huiping Duan

    X. Gu, Z. Zhang, M. Bartosik, P.H. Mayrhofer, H. Duan:
    "Dislocation densities and alternating strain fields in CrN/AlN nanolayers";
    Thin Solid Films, 638 (2017), 189 - 200.

  140. Authors: Rüdiger Haas, E308-D; Hans-Peter Degischer, E308-D; Peter Pongratz, E138; Heidemarie Knoblich, E308-D

    R. Haas, H.P. Degischer, P. Pongratz, H. Knoblich:
    "Verformungs-Martensit in Violinsaiten aus rostfreiem Stahl ";
    Praktische Metallographie - Practical Metallography, 41 (2004), 354 - 366.

  141. Authors: Rüdiger Haas, E308-D; Hans-Peter Degischer, E308-D; Peter Pongratz, E138; Anke Pyzalla, E308-P

    R. Haas, H.P. Degischer, P. Pongratz, A. Pyzalla:
    "Microstructure and properties of violin strings made of metastable austenitic steel";
    International Journal of Materials Research, 100 (2009), 11; 1557 - 1565.

  142. Authors: Ernst J. Haberland; Thomas Koch, E308-S; Silke Burkert; Albrecht Klemenz

    E.J. Haberland, T. Koch, S. Burkert, A. Klemenz:
    "Nanoindentation on the surface of embedded and cut human auditory ossicles";
    European Archives of Oto-Rhino-Laryngology, 262 (2005), 8; 681.

  143. Authors: Ernst J. Haberland; Thomas Koch, E308-S; Silke Burkert; Albrecht Klemenz

    E.J. Haberland, T. Koch, S. Burkert, A. Klemenz:
    "Oberflächenuntersuchungen an Gehörknöchelchen-Hartschnitten mit dem Nanoindentor (Abstract)";
    HNO-Informationen, 29 (2004), 2; 106.

  144. Authors: Rainer Hahn, E308-GrMayrh; Matthias Bartosik, E308-GrMayrh; Mirjam Arndt, Balzers; Peter Polcik, Plansee; Paul Heinz Mayrhofer, E308-GrMayrh

    R Hahn, M. Bartosik, M. Arndt, P. Polcik, P.H. Mayrhofer:
    "Annealing effect on the fracture toughness of CrN/TiN superlattices";
    International Journal of Refractory Metals & Hard Materials, 71 (2018), 352 - 356.

    More information

  145. Authors: Rainer Hahn, E308-GrMayrh; Matthias Bartosik, E308-GrMayrh; Rafael Soler; Christoph Kirchlechner; Gerhard Dehm, ESI Leoben; Paul Heinz Mayrhofer, E308-GrMayrh

    R Hahn, M. Bartosik, R. Soler, C. Kirchlechner, G. Dehm, P.H. Mayrhofer:
    "Superlattice effect for enhanced fracture toughness of hard coatings";
    Scripta Materialia, 124 (2016), 67 - 70.

  146. Authors: Gabriel Halat; Lukas Negrin; Thomas Koch, E308-S; Jochen Erhart, MedUni Wien; Patrick Platzer; Stefan Hajdu; Johannes Streicher

    G Halat, L Negrin, T. Koch, J. Erhart, P. Platzer, S Hajdu, J Streicher:
    "Biomechanical characteristics of suture anchor implants for flexor digitorum profundus repair";
    Journal of Hand Surgery - American Volume, 39 (2014), 2; 256 - 261.

  147. Authors: Gabriel Halat; Lukas Negrin; Ewald Unger, MedUni Wien; Thomas Koch, E308-S; Johannes Streicher; Jochen Erhart, MedUni Wien; Patrick Platzer; Stefan Hajdu

    G Halat, L Negrin, E. Unger, T. Koch, J Streicher, J. Erhart, P. Platzer, S Hajdu:
    "Introduction of a new repair technique in bony avulsion of the FDP tendon: A biomechanical study";
    Scientific Reports, 8 (2018), 9906; 1 - 8.

    More information

  148. Authors: Stefan Hartl; Alexander Schulz, E325-4; Harald Sima, E325-4; Thomas Koch, E308-S; Manfred Kaltenbacher, E325-4

    St. Hartl, A. Schulz, H. Sima, T. Koch, M. Kaltenbacher:
    "A Static Burst Test for Composite Flywheel Rotors";
    Applied Composite Materials, 23 (2016), 3; 271 - 288.

  149. Authors: Christian Heller, E163-02-1; Niklas Ulrich Pucher, E163-02-1; Bernhard Seidl, E163-02-1; Kadiriye Kalinyaprak-Icten, E163-02-1; Gerald Ullrich, E163-02-1; Ladislav Kuna, Joanneum Research; Valentin Satzinger, Joanneum Research; Volker Schmidt, Joanneum Research; Helga C. Lichtenegger, E308-S; Jürgen Stampfl, E308-S; Robert Liska, E163-02-1

    C. Heller, N.U Pucher, B. Seidl, K. Kalinyaprak-Icten, G. Ullrich, L. Kuna, V. Satzinger, V. Schmidt, H. Lichtenegger, J. Stampfl, R. Liska:
    "One- and two-photon activity of cross-conjugated photoinitiators with bathochromic shift";
    Journal of Polymer Science Part A: Polymer Chemistry, 45 (2007), 3280 - 3291.

    More information

  150. Authors: Christian Heller, E163-02-1; Martin Schwentenwein, E163-02-1; Günther Russmüller; Thomas Koch, E308-S; Doris Moser, Med. Uni. Wien; Christian Schopper, Med. Uni. Wien; Franz Varga, Osteology; Jürgen Stampfl, E308-S; Robert Liska, E163-02-1

    C. Heller, M. Schwentenwein, G. Russmüller, T. Koch, D. Moser, C. Schopper, F. Varga, J. Stampfl, R. Liska:
    "Vinylcarbonates and Vinylcarbamates: Biocompatible Monomers for Radical Photopolymerization";
    Journal of Polymer Science Part A: Polymer Chemistry, 49 (2011), 3; 650 - 661.

  151. Authors: Christian Heller, E308-S; Martin Schwentenwein, E163-02-1; Günter Russmüller, AKH Wien; Franz Varga, LBIO; Jürgen Stampfl, E308-S; Robert Liska, E163-02-1

    C. Heller, M. Schwentenwein, G. Russmüller, F. Varga, J. Stampfl, R. Liska:
    "Vinyl Esters: Low Cytotoxicity Monomers for the Fabrication of Biocompatible 3D Scaffolds by Lithography Based Additive Manufacturing";
    Journal of Polymer Science Part A: Polymer Chemistry, 47 (2009), 6941 - 6954.

    More information

  152. Authors: Bernhard Hinterndorfer; Günther Schneeweiss, E308-D; Sonja Felber, E207-01

    B. Hinterndorfer, G. Schneeweiss, S. Felber:
    "The Temperature Dependence of the Fracture Stress of Notched Tensile Specimens";
    Steel Research International, Vol. 80 (2009), No. 4, April; 288 - 297.

  153. Authors: Markus Hochegger, E308-D; Bernhard Harrer, FH OÖ F&E GmbH; Hans-Peter Degischer, E308-D; Sergiu Ilie, voestalpine AG

    M. Hochegger, B. Harrer, H.P. Degischer, S. Ilie:
    "Röntgen-Computertomografie der Verformungsporen in Warmzugproben aus Baustahlbrammen";
    Fortschritte in der Metallographie, Sonderbände der Praktischen Metallographie (2008), 40; 197 - 202.

    More information

  154. Authors: Katja Hölzl, E308-S; Shengmao Lin; Liesbeth Tytgat; Sandra Van Vlierberghe, Polymer Chemistr ...; Linxia Gu; Aleksandr Ovsianikov, E308

    K. Hölzl, S. Lin, L. Tytgat, S. Van Vlierberghe, L. Gu, A. Ovsianikov:
    "Bioink properties before, during and after 3D bioprinting";
    Biofabrication, 8 (2016), 20 pages.

    More information

  155. Authors: Christoph Hofstetter, E308-S; Sandra Orman, E163-02-1; Stefan Baudis, E163-02-1; Jürgen Stampfl, E308-S

    C. Hofstetter, S. Orman, S. Baudis, J. Stampfl:
    "Combining cure depth and cure degree, a new way to fully characterize novel photopolymers";
    Additive Manufacturing, 24 (2018), 166 - 172.

    More information

  156. Authors: Joelle Hofstetter, ETH Zürich; Elisabeth Martinelli, Med Univ Graz; Stefan Pogatscher, ETH Zürich; Patrik Schmutz, EMPA Dübendorf; Erwin Povoden-Karadeniz, E308-Gr Kozesch

    J. Hofstetter, E. Martinelli, S Pogatscher, P. Schmutz, E. Povoden-Karadeniz et al.:
    "Influence of trace impurities on the in vitro and in vivo degradation of biodegradable Mg-5Zn-0.3Ca alloys";
    Acta Biomaterialia, 23 (2015), 347 - 353.

    More information

  157. Authors: Joelle Hofstetter, ETH Zürich; Stefan Rüedi, ETH Zürich; Iris Baumgartner, AIT GmbH, LKR; Helmut Kilian, AIT GmbH, LKR; Bernhard Mingler, AIT GmbH, Biomet; Erwin Povoden-Karadeniz, E308-Gr Kozesch

    J. Hofstetter, S. Rüedi, I. Baumgartner, H. Kilian, B. Mingler, E. Povoden-Karadeniz et al.:
    "Processing and microstructure-property relations of high-strength low-alloy (HSLA) Mg-Zn-Ca alloys";
    Acta Materialia, 98 (2015), 423 - 432.

    More information

  158. Authors: David Holec, E308-GrMayrh; Ferenc Tasnadi; Peter Wagner; Martin Friak; Jörg Neugebauer; Paul Heinz Mayrhofer, E308-GrMayrh; Jozef Keckes, MUL

    D. Holec, F. Tasnadi, P. Wagner, M. Friak, J. Neugebauer, P.H. Mayrhofer, J. Keckes:
    "Macroscopic elastic properties of textured ZrN-AlN polycrystalline aggregates: From ab initio calculations to grain-scale interactions";
    Physical Review B, 90 (2014), 184106-1 - 184106-9.

  159. Authors: David Holec, MU Leoben; Liangcai Zhou, E308-GrMayrh; Richard Rachbauer; Paul Heinz Mayrhofer, E308-GrMayrh

    D. Holec, L. Zhou, R. Rachbauer, P.H. Mayrhofer:
    "Alloying-related trends from first principles: An application to the Ti-Al-X-N system";
    Journal of Applied Physics, 13 (2013), 113510; 1 - 8.

  160. Authors: Robert Hollerweger, E308-GrMayrh; David Holec, E308-GrMayrh; Jörg Ulrich Paulitsch, E308-GrMayrh; Matthias Bartosik, E308-GrMayrh; Rostislav Daniel; Richard Rachbauer; Peter Polcik, Plansee; Jozef Keckes, MUL; Christina Krywka; Holger Euchner, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh

    R. Hollerweger, D. Holec, J. Paulitsch, M. Bartosik, R. Daniel, R. Rachbauer, P. Polcik, J. Keckes, C. Krywka, H. Euchner, P.H. Mayrhofer:
    "Complementary ab initio and X-ray nanodiffraction studies of Ta2O5";
    Acta Materialia, 83 (2015), 276 - 284.

    More information

  161. Authors: Robert Hollerweger, E308-GrMayrh; David Holec, E308-GrMayrh; Jörg Ulrich Paulitsch, E308-GrMayrh; Richard Rachbauer; Peter Polcik, Plansee; Paul Heinz Mayrhofer, E308-GrMayrh

    R. Hollerweger, D. Holec, J. Paulitsch, R. Rachbauer, P. Polcik, P.H. Mayrhofer:
    "Magnetic field strength influence on the reactive magnetron sputter deposition of Ta2O5";
    Journal of Physics D: Applied Physics, 46 (2013), 335203.

  162. Authors: Robert Hollerweger, E308-GrMayrh; Helmut Riedl, E308-GrMayrh; Jörg Ulrich Paulitsch, E308-GrMayrh; Mirjam Arndt, Balzers; Richard Rachbauer; Peter Polcik, Plansee; Sophie Primig, MUL; Paul Heinz Mayrhofer, E308-GrMayrh

    R. Hollerweger, H. Riedl, J. Paulitsch, M. Arndt, R. Rachbauer, P. Polcik, S. Primig, P.H. Mayrhofer:
    "Origin of High Temperature Oxidation Resistance of Ti-Al-Ta-N Coatings";
    Surface & Coatings Technology, 257 (2014), 19256; 78 - 86.

    More information

  163. Authors: Christian Hollinsky; Thomas Kolbe; Ingrid Walter; Anja Joachim; Simone Sandberg; Thomas Koch, E308-S; Thomas Rülicke

    C. Hollinsky, T Kolbe, I Walter, A. Joachim, S. Sandberg, T. Koch, T Rülicke:
    "Comparison of a new self-gripping mesh with other fixation methods for laparoscopic hernia repair in a rat model";
    Journal of the American College of Surgeons, 208 (2009), 6; 1107 - 1114.

  164. Authors: Christian Hollinsky; Thomas Kolbe; Ingrid Walter; Anja Joachim; Simone Sandberg; Thomas Koch, E308-S; Thomas Rülicke; Albert Tuchmann

    C. Hollinsky, T Kolbe, I Walter, A. Joachim, S. Sandberg, T. Koch, T Rülicke, A Tuchmann:
    "Tensile strength and adhesion formation of mesh fixation systems used in laparoscopic incisional hernia repair";
    Surgical Endoscopy and other Interventional Techniques, 24 (2010), 6; 1318 - 1324.

  165. Authors: Christian Hollinsky; Simone Sandberg; Thomas Koch, E308-S; Sabine Seidler, E308-S

    C. Hollinsky, S. Sandberg, T. Koch, S. Seidler:
    "Biomechanical properties of lightweight versus heavyweight meshes for laparoscopic inguinal hernia repair and their impact on recurrence rates";
    Surgical Endoscopy and other Interventional Techniques, 22 (2008), 12; 2679 - 2685.

  166. Authors: Sylvia Holly, va Wire Technology; Phillip Haslberger, MU Leoben; Dominik Zügner, E308-Gr Kozesch; Ronald Schnitzer, MU Leoben; Ernst Kozeschnik, E308-Gr Kozesch

    S. Holly, P. Haslberger, D. Zügner, R. Schnitzer, E. Kozeschnik:
    "Development of high-strength welding consumables using calculations and microstructural characterisation";
    Welding in the World, 62 (2018), 451 - 458.

  167. Authors: Ivan Holzer, TU Graz; Ernst Kozeschnik, E308-Gr Kozesch

    I. Holzer, E. Kozeschnik:
    "Computer simulation of the yield strength evolution in Cu-precipitation strengthened ferritic steel";
    Materials Science and Engineering A, 527 (2010), 3546 - 3551.

  168. Authors: Ivan Holzer, TU Graz; Ernst Kozeschnik, E308-Gr Kozesch

    I. Holzer, E. Kozeschnik:
    "Predicted precipitate back-stress and creep rupture strength of the advanced 9-12 % Cr steel COST E2";
    International Journal of Materials Research, 99 (2008), 4; 416 - 421.

  169. Authors: Ivan Holzer, TU Graz; Ernst Kozeschnik, E308-Gr Kozesch

    I. Holzer, E. Kozeschnik:
    "Simulation of copper precipitation in fe-cu alloys";
    Materials Science Forum, 638-642 (2010), 2579 - 2584.

  170. Authors: Ivan Holzer, TU Graz; Ernst Kozeschnik, E308-Gr Kozesch; Horst Cerjak, TU Graz

    I. Holzer, E. Kozeschnik, H. Cerjak:
    "New approach to predict the long-term creep behaviour and evolution of precipitate back-stress of 9-12% chromium steels";
    Transactions Of The Indian Institute Of Metals, 63 (2010), 137 - 143.

  171. Authors: Johannes Homa, E308-S; Stefan Zellhofer, E308-D; Jürgen Stampfl, E308-S

    J. Homa, S. Zellhofer, J. Stampfl:
    "Solid free form fabrication of silicon carbide cross flow filters";
    Journal of Ceramic Processing Research, 10 (2009), 1; 25 - 32.

    More information

  172. Authors: Thomas Huber, E308-D; Hans-Peter Degischer, E308-D; G. Lefranc; T. Schmitt

    T. Huber, H.P. Degischer, G. Lefranc, T. Schmitt:
    "Thermal expansion studies on aluminium-matrix composites with different reinforcement architecture of SiC particles";
    Composites Science and Technology, 66 (2006), 2206 - 2217.

  173. Authors: Thomas Huber, E308-D; Heidemarie Knoblich, E308-D; Hans-Peter Degischer, E308-D

    T. Huber, H. Knoblich, H.P. Degischer:
    "Charakterisierung des Gefüges von Al-SiCp-Metall-Matrix-Verbundwerkstoffen";
    Praktische Metallographie - Practical Metallography, XL (2003), 9; 432 - 442.

  174. Authors: W. Hübner; Anke Pyzalla, E308-P; K. Aßmus; Emanuel Wild, FH Vorarlberg; T. Wroblewski

    W. Hübner, A. Pyzalla, K. Aßmus, E. Wild, T. Wroblewski:
    "Phase stability of AISI 304 stainless steel during sliding wear at extremely low temperatures";
    Wear, 255 (2003), 476 - 480.

  175. Authors: Branislav Husar, E163-02-1; Christian Heller, E163-02-1; Martin Schwentenwein, E163-02-1; Andreas Mautner, E163-02-1; Franz Varga, Osteology; Thomas Koch, E308-S; Jürgen Stampfl, E308-S; Robert Liska, E163-02-1

    B. Husar, C. Heller, M. Schwentenwein, A. Mautner, F. Varga, T. Koch, J. Stampfl, R. Liska:
    "Biomaterials Based on Low Cytotoxic Vinyl Esters for Bone Replacement Application";
    Journal of Polymer Science Part A: Polymer Chemistry, 49 (2011), 4927 - 4934.

  176. Authors: Branislav Husar, E163-02-1; Andreas Mautner, E163-02-1; Christian Heller, E163-02-1; Martin Schwentenwein, E163-02-1; Franz Varga, Osteology; Thomas Koch, E308-S; Karin Macfelda, MedUni Wien; Günther Russmüller, Medizinische Uni ...; Jürgen Stampfl, E308-S; Robert Liska, E163-02-1

    B. Husar, A. Mautner, C. Heller, M. Schwentenwein, F. Varga, T. Koch, K. Macfelda, G. Russmüller, J. Stampfl, R. Liska:
    "Utilization of photopolymerization of new low toxic vinyl monomers in bone tissue engineering";
    Journal of Tissue Engineering and Regenerative Medicine, 6/Supplement s1/ (2012), 370.

  177. Authors: Farhan Imtiaz; Ernst Kozeschnik, E308-Gr Kozesch

    F. Imtiaz, E. Kozeschnik:
    "Investigation of Austenite-to-Ferrite Transformation in Ultralow and Low-Carbon Steel Using High-Speed Quenching Dilatometry and Thermokinetic Simulation";
    Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 48 (2017), 7; 3193 - 3204.

  178. Authors: Robert Inführ, E308-S; Niklas Pucher, E308-D; Christian Heller, E308-S; Helga C. Lichtenegger, E308-S; Robert Liska, E163-02-1; Volker Schmidt, Joanneum R., Weiz/A; Ladislav Kuna; Anja Haase, Joanneum; Jürgen Stampfl, E308-S

    R. Inführ, N. Pucher, C. Heller, H. Lichtenegger, R. Liska, V. Schmidt, L. Kuna, A. Haase, J. Stampfl:
    "Functional polymers by two-photon 3D lithography";
    Applied Surface Science, 254 (2007), 4; 836 - 840.

  179. Authors: Sorin Ivanovici, E165-02; Christoph Rill, E165-02; Thomas Koch, E308-S; Michael Puchberger, E165-02; Guido Kickelbick, E165-02

    S. Ivanovici, C. Rill, T. Koch, M. Puchberger, G. Kickelbick:
    "Solvent effects in the formation of hybrid materials based on titanium alkoxide-polysiloxane precursors";
    New Journal of Chemistry, 32 (2008), 7; 1243 - 1252.

    More information

  180. Authors: Toni Ivas; Anthony Nicholas Grundy; Erwin Povoden-Karadeniz, E308-Gr Kozesch; Ludwig Gauckler

    T. Ivas, A. Grundy, E. Povoden-Karadeniz, L.J. Gauckler:
    "Phase diagram of CeO2-CoO for nano sized powders";
    CALPHAD - Computer Coupling of Phase Diagrams and Thermochemistry, 36 (2012), 57 - 64.

    More information

  181. Authors: Toni Ivas; Anthony Nicholas Grundy; Erwin Povoden-Karadeniz, E308-Gr Kozesch; Sascha Zeljkovic; Ludwig Gauckler

    T. Ivas, A. Grundy, E. Povoden-Karadeniz, S. Zeljkovic, L.J. Gauckler:
    "Experimental phase diagram determination and thermodynamic assessment of the Gd2O3-CoO system";
    Acta Materialia, 58 (2010), 12; 4077 - 4087.

    More information

  182. Authors: Toni Ivas; Erwin Povoden-Karadeniz, E308-Gr Kozesch; Anthony Nicholas Grundy; Eva Jud-Sierra; Jurgen Grässlin; Ludwig Gauckler

    T. Ivas, E. Povoden-Karadeniz, A. Grundy, E. Jud-Sierra, J. Grässlin, L.J. Gauckler:
    "Experimental phase diagram determination and thermodynamic assessment of the CeO2-Gd2O3-CoO system";
    Journal of the American Ceramic Society, 96 (2012), 2; 613 - 626.

    More information

  183. Authors: Aurélie Jacob, E308-Gr Kozesch; Erwin Povoden-Karadeniz, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    A. Jacob, E. Povoden-Karadeniz, E. Kozeschnik:
    "Revised thermodynamic description of the Fe-Cr system based on an improved sublattice model of the σ phase";
    CALPHAD - Computer Coupling of Phase Diagrams and Thermochemistry, 60 (2018), 60; 16 - 28.

  184. Authors: Aurélie Jacob, E308-Gr Kozesch; Erwin Povoden-Karadeniz, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    A. Jacob, E. Povoden-Karadeniz, E. Kozeschnik:
    "The Cr-Nb-Si system: Improved thermodynamic modelling and its use in simulation of Laves phase in steel";
    CALPHAD - Computer Coupling of Phase Diagrams and Thermochemistry, 56 (2017), 56; 80 - 91.

    More information

  185. Authors: Jacob, E308-Gr Kozesch; Clemens Schmetterer; Alexandra Khvan; Alex Kondratiec; Ivanov; Hallstedt

    Jacob, C. Schmetterer, A. Khvan, A. Kondratiec, Ivanov, Hallstedt et al.:
    "Liquidus projection and thermodynamic modeling of the Cr-Fe-Nb ternary system";
    CALPHAD - Computer Coupling of Phase Diagrams and Thermochemistry, 54 (2016), 1 - 15.

    More information

  186. Authors: Martin Jenni, ARCS; Lukas Schimmer, ARCS; Rudolf Zauner, ARCS; Jürgen Stampfl, E308-S; Jeff Morris, CC New York

    M. Jenni, L. Schimmer, R. Zauner, J. Stampfl, J. Morris:
    "Quantitative study of powder binder separation of feedstocks";
    Powder Injection Moulding International, 2 (2008), 4; 50 - 55.

    More information

  187. Authors: M. Jílek Jr.; M. Jílek; F. Mendez Martin; Paul Heinz Mayrhofer, E308-GrMayrh; S. Veprek

    J. Jílek Jr., M. Jílek, F. Mendez Martin, P.H. Mayrhofer, S. Veprek:
    "High-rate deposition of AlTiN and related coatings with dense morphology by central cylindrical direct current magnetron sputtering";
    Thin Solid Films, 556 (2014), 361 - 368.

  188. Authors: Linas Jonusauskas, VU Lithuania; Marcus Lau, CENIDE, Essen; Peter Gruber, E308; Bilal Gökce, CENIDE Essen; Mangirdas Malinauskas, VU, Lithuania; Aleksandr Ovsianikov, E308

    L. Jonusauskas, M. Lau, P. Gruber, B. Gökce, M. Malinauskas, A. Ovsianikov:
    "Plasmon assisted 3D microstructuring of gold nanoparticle-doped polymers";
    Nanotechnology, 27 (2016), 1.

    More information

  189. Authors: Aju Joseph; Thomas Koch, E308-S; Sabine Seidler, E308-S; Sabu Thomas; Kuruvilla Joseph

    A. Joseph, T. Koch, S. Seidler, S. Thomas, K. Joseph:
    "Crystallization behaviour and spherulite growth rate of isotactic polypropylene in isotactic polypropylene/natural rubber based thermoplastic elastomers";
    Journal of Applied Polymer Science, 109 (2008), 3; 1714 - 1721.

  190. Authors: Aju Joseph; Sigrid Lüftl, E308-S; Sabine Seidler, E308-S; Sabu Thomas; Joseph Kuruvilla

    A. Joseph, S. Lüftl, S. Seidler, S. Thomas, J. Kuruvilla:
    "Nonisothermal thermophysical evaluation of polypropylenen/natural rubber based TPEs: Effect of blend ratio and dynamic vulcanization";
    Polymer Engineering and Science, 49 (2009), 7; 1332 - 1339.

    More information

  191. Authors: Isabelle Jouanny; Justinas Palisaitis; Chilan Ngo; Paul Heinz Mayrhofer, E308-GrMayrh; Lars Hultman; Per Persson; Suneel Kodambaka

    I. Jouanny, J. Palisaitis, C. Ngo, P.H. Mayrhofer, L. Hultman, P.O.A. Persson, S. Kodambaka:
    "In situ Transmission Electron Microscopy Studies of the Kinetics of Pt-Mo alloy Diffusion in ZrB2 Thin Films";
    Applied Physics Letters, 103 (2013), 121601; 1 - 3.

  192. Authors: JaeHyeok Jung; Ernst Kozeschnik, E308-Gr Kozesch; Seong Ho Han; B.C. De Cooman

    J. Jung, E. Kozeschnik, S. Han, B. De Cooman:
    "Analysis of the Mechanical Properties of N-Added CMn Structural Steel by the Impulse Internal Friction Technique";
    Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 43A (2012), 4587 - 4600.

    More information

  193. Authors: Vladimir Juras, AKH; Michal Bittsansky, AKH; Zuzana Majdisova, AKH; Pavol Szomolany, AKH; Irene Sulzbacher, Meduni Wien; Stefan Gäbler; Jürgen Stampfl, E308-S; Georg Schüller, LBI Traumatologie; Siegfried Trattnig

    V. Juras, M. Bittsansky, Z. Majdisova, P. Szomolany, I. Sulzbacher, S. Gäbler, J. Stampfl, G. Schüller, S. Trattnig:
    "In vitro determination of biomechanical properties of human articular cartilage in osteoarthritis using multi-parametric MRI";
    Journal of Magnetic Resonance, 197 (2009), 1; 40 - 47.

  194. Authors: Lukas Kain; Orestis G. Andriotis, E317-02-1; Peter Gruber, E308-S; Martin Frank, E317-02-1; Marica Markovic, E308-S; David Grech, U. Southampton; Vedran Nedelkovski, E317-02-1; Martin Stolz, U.Southampton; Aleksandr Ovsianikov, E308-S; Philipp J. Thurner, E317-02-1

    L. Kain, O.G. Andriotis, P. Gruber, M. Frank, M. Markovic, D. Grech, V. Nedelkovski, M. Stolz, A. Ovsianikov, P.J. Thurner:
    "Calibration of colloidal probes with atomic force microscopy for micromechanical assessment";
    Journal of the Mechanical Behavior of Biomedical Materials, 85 (2018), 225 - 236.

    More information

  195. Authors: Florian Kamleitner, E308-S; Bernadette Duscher, E308-S; Thomas Koch, E308-S; Simone Knaus, E163-02-1; V.-M. Archodoulaki, E308-S

    F. Kamleitner, B. Duscher, T. Koch, S. Knaus, V. Archodoulaki:
    "Long chain branching as an innovative up-cycling process of polypropylene post-consumer waste - Possibilities and limitations";
    Waste Management, 68 (2017), 32 - 37.

    More information

  196. Authors: Florian Kamleitner, E308-S; Bernadette Duscher, E308-S; Thomas Koch, E308-S; Simone Knaus, E163-02-1; V.-M. Archodoulaki, E308-S

    F. Kamleitner, B. Duscher, T. Koch, S. Knaus, V. Archodoulaki:
    "Upcycling of polypropylene-the influence of polyethylene impurities";
    Polymer Engineering and Science, 57 (2017), 12; 1374 - 1381.

    More information

  197. Authors: Florian Kamleitner, E308-S; Bernadette Duscher, E308-S; Thomas Koch, E308-S; Simone Knaus, E163-02-1; Klaus Schmid, Pergan GmbH; V.-M. Archodoulaki, E308-S

    F. Kamleitner, B. Duscher, T. Koch, S. Knaus, K. Schmid, V. Archodoulaki:
    "Influence of the Molar Mass on Long-Chain-Branching of Polypropylene";
    Polymers, 9 (2017), 9.

    More information

  198. Authors: Markus Karlsohn, University Bochum; Sebastian Weber, Max Planck Institute; Seyed Reza Alavi Zaree, E308-D; S. Müller, TU Berlin; Werner Theisen, University Bochum; W. Reimers, TU Berlin; Anke Rita Pyzalla, MPI Eisenforschung

    M. Karlsohn, S. Weber, S.R. Alavi Zaree, S. Müller, W. Theisen, W. Reimers, A. Pyzalla:
    "Manufacturing, microstructure and wear resistance of novel hot extruded Fe based metal matrix composites";
    Powder Metallurgy, 51 (2008), 1; 31 - 37.

    More information

  199. Authors: Johann Kastner, FH OÖ; Bernhard Harrer, FH OÖ F&E GmbH; Hans-Peter Degischer, E308-D

    J. Kastner, B. Harrer, H.P. Degischer:
    "High resolution cone beam X-ray computed tomography of";
    Materials Characterization, 62 (2011), 99 - 107.

  200. Authors: Johann Kastner, FH OÖ; Bernhard Harrer, FH OÖ F&E GmbH; Guillermo Requena, E308-D

    J. Kastner, B. Harrer, G. Requena:
    "A comparative study of high resolution cone beam X-ray tomography and synchrotron tomography applied to Fe- and Al-alloys";
    NDT and E International, 43 (2010), 7; 599 - 605.

    More information

  201. Authors: Johann Kastner, FH OÖ; Bernhard Plank, FH OÖ, Wels; Guillermo Requena, E308-D

    J. Kastner, B. Plank, G. Requena:
    "Non-destructive characterisation of polymers and Al-alloys by polychromatic cone-beam phase contrast tomography";
    Materials Characterization, 64 (2012), 1; 79 - 87.

  202. Authors: Alexander Kirnbauer, E308-GrMayrh; Valentin Dalbauer, E308-GrMayrh; Philip Kutrowatz, E308-GrMayrh; Szilárd Kolozsvári, Plansee; Jürgen Ramm; Christian Martin Koller, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh

    A Kirnbauer, V. Dalbauer, P Kutrowatz, S. Kolozsvári, J. Ramm, C.M. Koller, P.H. Mayrhofer:
    "Oxygen dependent morphology and mechanical properties of Al Cr (Fe)-based coatings";
    Surface & Coatings Technology, 349 (2018), 249; 103 - 110.

    More information

  203. Authors: Yulia Kiyan, MHH, Hannover (DE); Anne Limbourg, MHH, Hannover (DE); Roman Kiyan, LZH, Hannover (DE); Sergey Tkachuk, MHH, Hannover (DE); Florian Limbourg, MHH, Hannover (DE); Aleksandr Ovsianikov, E308-S; Boris Chichkov, LZH Hannover; Hermann Haller, MHH, Hannover (DE); Inna Dumler, MHH, Hannover (DE)

    Y. Kiyan, A. Limbourg, R. Kiyan, S. Tkachuk, F. Limbourg, A. Ovsianikov, B. Chichkov, H. Haller, I. Dumler:
    "Urokinase receptor associates with myocardin to control vascular smooth muscle cells phenotype in vascular disease";
    Arteriosclerosis, Thrombosis, and Vascular Biology, 32 (2012), 110 - 122.

  204. Authors: Andreas Kleinbichler; Matthias Bartosik, E308-GrMayrh; Bernhard Völker; Megan J. Cordill, ESI Leoben

    A. Kleinbichler, M. Bartosik, B. Völker, M.J. Cordill:
    "Thin Film Adhesion of Flexible Electronics Influenced by Interlayers";
    Advanced Engineering Materials, # (2016), 1 - 7.

  205. Authors: Fedor Klimashin, E308-GrMayrh; Holger Euchner, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh

    F. Klimashin, H. Euchner, P.H. Mayrhofer:
    "Computational and experimental studies on structure and mechanical properties of Mo-Al-N";
    Acta Materialia, 107 (2016), 273 - 278.

    More information

  206. Authors: Fedor Klimashin, E308-GrMayrh; Nikola Koutná, E308-GrMayrh; Holger Euchner, E308-GrMayrh; David Holec, MU Leoben; Paul Heinz Mayrhofer, E308-GrMayrh

    F. Klimashin, N. Koutná, H. Euchner, D. Holec, P.H. Mayrhofer:
    "The impact of nitrogen content and vacancies on structure and mechanical properties of Mo-N thin films";
    Journal of Applied Physics, 120 (2016), 185301; 1 - 10.

    More information

  207. Authors: Fedor Klimashin, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh

    F. Klimashin, P.H. Mayrhofer:
    "Ab initio-guided development of super-hard Mo-Al-Cr-N coatings";
    Scripta Materialia, 140 (2017), 27 - 30.

    More information

  208. Authors: Fedor Klimashin, E308-GrMayrh; Helmut Riedl, E308-GrMayrh; Daniel Primetzhofer, Department of Ph ...; Jörg Ulrich Paulitsch, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh

    F. Klimashin, H. Riedl, D. Primetzhofer, J. Paulitsch, P.H. Mayrhofer:
    "Composition driven phase evolution and mechanical properties of Mo-Cr-N hard coatings";
    Journal of Applied Physics, 118 (2015), 025305; 1 - 7.

  209. Authors: Marlene Knausz; Gernot Oreski; Gabriele Eder; Yuliya Voronko, E308-S; Bernadette Duscher, E308-S; Thomas Koch, E308-S; Gerald Pinter, MU Leoben; Karl Berger

    M Knausz, G Oreski, G Eder, Y Voronko, B. Duscher, T. Koch, G. Pinter, K Berger:
    "Degradation of photovoltaic backsheets: Comparison of the aging induced changes on module and component level";
    Journal of Applied Polymer Science, 132 (2015), 42093; 1 - 8.

    More information

  210. Authors: Marlene Knausz; Gernot Oreski; Markus Schmidt; Peter Guttmann; Karl Berger; Yuliya Voronko, E308-S; Gabriele Eder; Thomas Koch, E308-S; Gerald Pinter, MU Leoben

    M Knausz, G Oreski, M Schmidt, P Guttmann, K Berger, Y Voronko, G Eder, T. Koch, G. Pinter:
    "Thermal expansion behavior of solar cell encapsulation materials";
    Polymer Testing, 44 (2015), 160 - 167.

    More information

  211. Authors: Thomas Koch, E308-S; Manuel Evaristo; A. Pauschitz; M. Roy; Albano Cavaleiro

    T. Koch, M Evaristo, A. Pauschitz, M. Roy, A Cavaleiro:
    "Nanoindentation and nanoscratch behaviour of reactive sputtered deposited W-S-C film";
    Thin Solid Films, 518 (2009), 185 - 193.

  212. Authors: Thomas Koch, E308-S; Franz René Kogler, E165-02; Ulrich Schubert, E165-02; Sabine Seidler, E308-S

    T. Koch, F.R. Kogler, U. Schubert, S. Seidler:
    "Mechanical Properties of Organic-Inorganic Hybrid Materials Determined by Indentation Techniques";
    Monatshefte für Chemie, 138 (2007), 293 - 299.

    More information

  213. Authors: Thomas Koch, E308-S; Doris Machl

    T. Koch, D. Machl:
    "Evaluation of scratch resistance in multiphase PP blends";
    Polymer Testing, 26 (2007), 7; 927 - 936.

  214. Authors: Thomas Koch, E308-S; Dietmar Salaberger, E308-S; Armin Zankel; Herbert Reingruber; Andreas Steiger-Thirsfeld, E057B; Yuliya Voronko, E308-S; Sabine Seidler, E308-S

    T. Koch, D. Salaberger, A Zankel, H Reingruber, A. Steiger-Thirsfeld, Y Voronko, S. Seidler:
    "Methods for Characterizing the 3-D Morphology of Polymer Composites";
    Macromolecular Symposia, 315 (2012), 115 - 124.

    More information

  215. Authors: Thomas Koch, E308-S; Sabine Seidler, E308-S

    T. Koch, S. Seidler:
    "Applications of instrumented indentation testing for the characterization of polypropylene materials";
    Proceedings of the Institution of Mechanical Engineers Part C - Journal of Mechanical Engineering Science, 226 (2012), 2; 385 - 393.

  216. Authors: Thomas Koch, E308-S; Sabine Seidler, E308-S

    T. Koch, S. Seidler:
    "Correlations between indentation hardness and yield stress in thermoplastic polymers";
    Strain, 45 (2009), 1; 26 - 33.

  217. Authors: Thomas Koch, E308-S; Sabine Seidler, E308-S; E. Halwax; S. Bernstorff

    T. Koch, S. Seidler, E. Halwax, S. Bernstorff:
    "Microhardness of quenched and annealed isotactic polypropylene";
    Journal of Materials Science, 42 (2007), 5318 - 5326.

  218. Authors: Suneel Kodambaka; Chilan Ngo; Justinas Palisaitis; Paul Heinz Mayrhofer, E308-GrMayrh; Lars Hultman; Per Persson

    S. Kodambaka, C. Ngo, J. Palisaitis, P.H. Mayrhofer, L. Hultman, P.O.A. Persson:
    "Kinetics of Ga Droplet Decay on Thin Carbon Films";
    Applied Physics Letters, 102 (2013), 161601; 1 - 4.

  219. Authors: Franz René Kogler, E165-02; Thomas Koch, E308-S; Herwig Peterlik, Faculty of Physi ...; Sabine Seidler, E308-S; Ulrich Schubert, E165-02

    F.R. Kogler, T. Koch, H. Peterlik, S. Seidler, U. Schubert:
    "Mechanical, thermomechanical, and thermal properties of polystyrene crosslinked with a multifunctional zirconium oxo cluster";
    Journal of Polymer Science Part B: Polymer Physics, 45 (2007), 16; 2215 - 2231.

    More information

  220. Authors: Christian Martin Koller, E308-GrMayrh; Valentin Dalbauer, E308-GrMayrh; Alexander Kirnbauer, E308-GrMayrh; Stefan Löffler, E057B, E138; Szilárd Kolozsvári, Plansee; Jürgen Ramm; Paul Heinz Mayrhofer, E308-GrMayrh

    C.M. Koller, V. Dalbauer, A Kirnbauer, S. Löffler, S. Kolozsvári, J. Ramm, P.H. Mayrhofer:
    "Selective phase formation in substoichiometric Al-Cr-based oxides";
    Scripta Materialia, 139 (2017), 139; 144 - 147.

    More information

  221. Authors: Christian Martin Koller, E308-GrMayrh; Valentin Dalbauer, E308-GrMayrh; Alexander Kirnbauer, E308-GrMayrh; Markus Sauer, E057E; Szilárd Kolozsvári, Plansee; Jürgen Ramm; Paul Heinz Mayrhofer, E308-GrMayrh

    C.M. Koller, V. Dalbauer, A Kirnbauer, M. Sauer, S. Kolozsvári, J. Ramm, P.H. Mayrhofer:
    "Impact of Si and B on the phase stability of cathodic arc evaporated Al0.70Cr0.30-based oxides";
    Scripta Materialia, 152 (2018), 152; 107 - 111.

  222. Authors: Christian Martin Koller, E308-GrMayrh; Valentin Dalbauer, E308-GrMayrh; Szilárd Kolozsvári, Plansee; Jürgen Ramm; Paul Heinz Mayrhofer, E308-GrMayrh

    C.M. Koller, V. Dalbauer, S. Kolozsvári, J. Ramm, P.H. Mayrhofer:
    "Microstructure and phase evolution of gradually-structured arc evaporated Al0.25Cr0.75-based oxide coatings";
    Vacuum, 155 (2018), 155; 645 - 649.

  223. Authors: Christian Martin Koller, E308-GrMayrh; Valentin Dalbauer, E308-GrMayrh; Alexander Schmelz, E308-GrMayrh; Robert Raab, E308-GrMayrh; Peter Polcik, Plansee; Jürgen Ramm; Paul Heinz Mayrhofer, E308-GrMayrh

    C.M. Koller, V. Dalbauer, A Schmelz, R. Raab, P. Polcik, J. Ramm, P.H. Mayrhofer:
    "Structure, mechanical properties, and thermal stability of arc evaporated (Al1-xCrx)2O3 coatings";
    Surface & Coatings Technology, 342 (2018), 342; 37 - 47.

  224. Authors: Christian Martin Koller, E308-GrMayrh; Stefan Glatz, E308-GrMayrh; Szilard Koloszvári, Plansee; Jürgen Ramm; Paul Heinz Mayrhofer, E308-GrMayrh

    C.M. Koller, S.A. Glatz, S. Koloszvári, J. Ramm, P.H. Mayrhofer:
    "Influence of substrate bias on structure and mechanical properties of arc evaporated (Al,Cr)2O3 and (Al,Cr,Fe)2O3 coatings";
    Surface & Coatings Technology, 319 (2017), 319; 389 - 393.

  225. Authors: Christian Martin Koller, E308-GrMayrh; Rainer Hahn, E308-GrMayrh; Jürgen Ramm; Szilárd Kolozsvári, Plansee; Paul Heinz Mayrhofer, E308-GrMayrh

    C.M. Koller, R Hahn, J. Ramm, S. Kolozsvári, P.H. Mayrhofer:
    "Microstructural modifications in powder-metallurgically produced Al0.675Cr0.275Fe0.05 targets during cathodic arc evaporation";
    Journal of Vacuum Science & Technology A, A34 (2016), A34; 1 - 8.

  226. Authors: Christian Martin Koller, E308-GrMayrh; Rainer Hahn, E308-GrMayrh; Beno Widrig, Oerlikon Balzers; Jürgen Ramm; Szilárd Kolozsvári, Plansee; Jörg Ulrich Paulitsch, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh

    C.M. Koller, R Hahn, B. Widrig, J. Ramm, S. Kolozsvári, J. Paulitsch, P.H. Mayrhofer:
    "Triggering the Phase Evolution Within (Al,Cr)2O3-based Coatings by Alloying and Microstructural Concepts";
    Berg- und Hüttenmännische Monatshefte (BHM), 191 (2016), Volume 161 Issue 7; 325 - 329.

  227. Authors: Christian Martin Koller, E308-GrMayrh; Robert Hollerweger, E308-GrMayrh; Richard Rachbauer; Szilárd Kolozsvári, Plansee; Jörg Ulrich Paulitsch, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh

    C.M. Koller, R. Hollerweger, R. Rachbauer, S. Kolozsvári, J. Paulitsch, P.H. Mayrhofer:
    "Annealing studies and oxidation tests of a hybrid multilayer arrangement of cathodic arc evaporated Ti-Al-N and reactively sputtered Ta-Al-N coatings";
    Surface & Coatings Technology, 283 (2015), 89 - 95.

    More information

  228. Authors: Christian Martin Koller, E308-GrMayrh; Robert Hollerweger, E308-GrMayrh; Corinna Sabitzer, E308-GrMayrh; Richard Rachbauer; Peter Polcik, Plansee; Jörg Ulrich Paulitsch, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh

    C.M. Koller, R. Hollerweger, C. Sabitzer, R. Rachbauer, P. Polcik, J. Paulitsch, P.H. Mayrhofer:
    "Thermal Stability and Oxidation Resistance of Arc Evaporated TiAlN, TaAlN, TiAlTaN, and TiAlN/TaAlN Coatings";
    Surface & Coatings Technology, Volume 259, Part C (2014), 259; 599 - 607.

    More information

  229. Authors: Christian Martin Koller, E308-GrMayrh; Alexander Kirnbauer, E308-GrMayrh; Rainer Hahn, E308-GrMayrh; Beno Widrig, Oerlikon Balzers; Szilard Koloszvári, Plansee; Jürgen Ramm; Paul Heinz Mayrhofer, E308-GrMayrh

    C.M. Koller, A Kirnbauer, R Hahn, B. Widrig, S. Koloszvári, J. Ramm, P.H. Mayrhofer:
    "Oxidation behavior of intermetallic Al-Cr and Al-Cr-Fe macroparticles";
    Journal of Vacuum Science & Technology A, 35 (2017), 6; 06160101 - 06160110.

  230. Authors: Christian Martin Koller, E308-GrMayrh; Alexander Kirnbauer, E308-GrMayrh; Szilárd Kolozsvári, Plansee; Jürgen Ramm; Paul Heinz Mayrhofer, E308-GrMayrh

    C.M. Koller, A Kirnbauer, S. Kolozsvári, J. Ramm, P.H. Mayrhofer:
    "Impact of morphology and phase composition on mechanical properties of α-structured (Cr,Al)2O3/(Al,Cr,X)2O3 multilayers";
    Scripta Materialia, 146 (2018), 146; 208 - 212.

  231. Authors: Christian Martin Koller, E308-GrMayrh; Alexander Kirnbauer, E308-GrMayrh; Richard Rachbauer; Szilárd Kolozsvári, Plansee; Paul Heinz Mayrhofer, E308-GrMayrh

    C.M. Koller, A Kirnbauer, R. Rachbauer, S. Kolozsvári, P.H. Mayrhofer:
    "Thermally-induced phase transformation sequence of arc evaporated Ta-Al-N coatings";
    Scripta Materialia, 113 (2016), 75 - 78.

  232. Authors: Christian Martin Koller, E308-GrMayrh; Heribert Marihart, E308-GrMayrh; Hamid Bolvardi, Oerlikon Balzers; Szilárd Kolozsvári, Plansee; Paul Heinz Mayrhofer, E308-GrMayrh

    C.M. Koller, H Marihart, H. Bolvardi, S. Kolozsvári, P.H. Mayrhofer:
    "Structure, phase evolution, and mechanical properties of DC, pulsed DC, and high power impulse magnetron sputtered Ta-N films";
    Surface & Coatings Technology, 347 (2018), 347; 304 - 312.

  233. Authors: Christian Martin Koller, E308-GrMayrh; Jürgen Ramm; Szilárd Kolozsvári, Plansee; F Munnik; Jörg Ulrich Paulitsch, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh

    C.M. Koller, J. Ramm, S. Kolozsvári, F. Munnik, J. Paulitsch, P.H. Mayrhofer:
    "Corundum-type Fe-doped cathodic arc evaporated Al-Cr-O coatings";
    Scripta Materialia, Volume 97 (2015), 49 - 52.

    More information

  234. Authors: Christian Martin Koller, E308-GrMayrh; Jürgen Ramm; Szilárd Kolozsvári, Plansee; Jörg Ulrich Paulitsch, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh

    C.M. Koller, J. Ramm, S. Kolozsvári, J. Paulitsch, P.H. Mayrhofer:
    "Role of droplets and iron on the phase formation of arc evaporated Al-Cr-oxide coatings";
    Surface & Coatings Technology, Volume 276 (2015), 735 - 742.

    More information

  235. Authors: Sergey Konovalov, RWTH Aachen; Ulrich Prahl, RWTH Aachen; Rainer Kohlmann, Siegen; Ernst Kozeschnik, E308-Gr Kozesch; Wolfgang Bleck, RWTH Aachen

    S. Konovalov, U. Prahl, R. Kohlmann, E. Kozeschnik, W. Bleck:
    "Precipitation development simulation of high-temperature carburization along the process chain";
    HTM Journal of Heat Treatment and Materials, 66 (2011), 4; 217 - 229.

    More information

  236. Authors: I. Kotter; W. Grellmann; Thomas Koch, E308-S; Sabine Seidler, E308-S

    I. Kotter, W. Grellmann, T. Koch, S. Seidler:
    "Morphology-Toughness Correlation of Polypropylene/Ethylene-Propylene Rubber Blends";
    Journal of Applied Polymer Science, 100 (2006), 3364 - 3371.

  237. Authors: Nikola Koutná, E308-GrMayrh; David Holec, E308-GrMayrh; Martin Friak; Paul Heinz Mayrhofer, E308-GrMayrh

    N. Koutná, D. Holec, M. Friak, P.H. Mayrhofer et al.:
    "Stability and elasticity of metastable solid solutions and superlattices in the MoN--TaN system: First-principles calculations";
    Materials & Design, 144 (2018), 310 - 322.

    More information

  238. Authors: Nikola Koutná, E308-GrMayrh; David Holec, MU Leoben; Ondřej Svoboda, Faculty of Mecha ...; Fedor Klimashin, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh

    N. Koutná, D. Holec, O. Svoboda, F. Klimashin, P.H. Mayrhofer:
    "Point defects stabilise cubic Mo-N and Ta-N";
    Journal of Physics D: Applied Physics, 49 (2016), 375303; 1 - 8.

    More information

  239. Author: Ernst Kozeschnik, E308-Gr Kozesch

    E. Kozeschnik:
    "Thermodynamic prediction of the equilibrium chemical composition of critical nuclei: Bcc Cu precipitation in alpha-Fe";
    Scripta Materialia, 59 (2008), 1018 - 1021.

  240. Authors: Ernst Kozeschnik, E308-Gr Kozesch; Jiri Svoboda, Academy of Scien ...; Rene Radis, E308-Gr Kozesch; Franz Dieter Fischer, MU Leoben

    E. Kozeschnik, J. Svoboda, R. Radis, F.D. Fischer:
    "Mean-Field Model for the Growth and Coarsening of Stoichiometric Precipitates at Grain Boundaries";
    Modelling and Simulation in Materials Science and Engineering, 18 (2010), 015011; 1 - 19.

    More information

  241. Authors: Johannes Kreyca, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    J. Kreyca, E. Kozeschnik:
    "Analysis of the Temperature and Strain-Rate Dependences of Strain Hardening";
    Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 49 (2018), 1; 18 - 21.

  242. Authors: Johannes Kreyca, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    J. Kreyca, E. Kozeschnik:
    "Dissolution of hardening phases during deformation in an A6061 Aluminium alloy";
    Procedia Engineering, 207 (2017), 37 - 41.

  243. Authors: Johannes Kreyca, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    J. Kreyca, E. Kozeschnik:
    "Flow Stress Modelling and Microstructure Development during Deformation of Metallic Materials";
    Materials Science Forum, 892 (2017), 44 - 49.

    More information

  244. Authors: Johannes Kreyca, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    J. Kreyca, E. Kozeschnik:
    "State parameter-based constitutive modelling of stress strain curves in Al-Mg solid solutions";
    International Journal of Plasticity, 103 (2018), 103; 67 - 80.

  245. Authors: Johannes Kreyca, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    J. Kreyca, E. Kozeschnik:
    "Temperature-dependent strain hardening, precipitation and deformationinduced microstructure evolution in AA 6061";
    Materials Science and Engineering A, 708 (2017), 411 - 418.

    More information

  246. Author: Brigitte Kriszt, E308-D

    B. Kriszt:
    "Innovation zellulare Metalle - Potenziale und Perspektiven";
    Berg- und Hüttenmännische Monatshefte (BHM), 149 (2004), 5; 181 - 186.

  247. Authors: Brigitte Kriszt, E308-D; C. Kolbeck; Andreas Kottar, E308-D; S. Figoutz; W. Pelzer

    B. Kriszt, C. Kolbeck, A. Kottar, S. Figoutz, W. Pelzer:
    "Characterization of open cell iron based cellular material";
    Steel Grips, Jounal of steel and related materials, 1 (2003), No. 5; 374 - 379.

  248. Authors: Stefan Krivec, E163-02-1; Nadeja Matsko, TU-Graz; Valentin Satzinger, Joanneum Research; Niklas Ulrich Pucher, E163-02-1; Nicole Galler, TU-Graz; Thomas Koch, E308-S; Volker Schmidt, Joanneum Research; Werner Grogger, TU-Graz; Robert Liska, E163-02-1; Helga C. Lichtenegger, E308-S

    S. Krivec, N. Matsko, V. Satzinger, N.U Pucher, N. Galler, T. Koch, V. Schmidt, W. Grogger, R. Liska, H. Lichtenegger:
    "Silica-Based, Organically Modified Host Material for Waveguide Structuring by Two-Photon-Induced Photopolymerization";
    Advanced Functional Materials, 20 (2010), 1 - 9.

  249. Authors: Philipp Kürnsteiner; Markus B. Wilm; Andreas Weisheit; Pere Barriobero Vila, E308-Requena; Eric A. Jägle; Dierk Raabe

    P. Kürnsteiner, M. B. Wilm, A. Weisheit, P. Barriobero Vila, E. A. Jägle, D. Raabe:
    "Massive nanoprecipitation in an Fe-19Ni-xAl maraging steel triggered by the intrinsic heat treatment during laser metal deposition";
    Acta Materialia, - (2017), 129; 52 - 60.

    More information

  250. Authors: Josef Kumpfmüller, E163-02-1; Klaus Stadlmann, E308-S; Valentin Satzinger, Joanneum Research; Li Zhiquan, E163-02-1; Jürgen Stampfl, E308-S; Robert Liska, E163-02-1

    J. Kumpfmüller, K. Stadlmann, V. Satzinger, L. Zhiquan, J. Stampfl, R. Liska:
    "Two-photon-induced Microfabrication of Flexible Optical Waveguides";
    Journal of Laser Micro Nanoengineering, 6 (2011), 3; 195 - 198.

  251. Authors: Josef Kupfmüller, E163-02-1; Zhiquan Li, E163-02-1; Valentin Satzinger, Joanneum Research; Jürgen Stampfl, E308-S; Robert Liska, E163-02-1

    J. Kupfmüller, Z. Li, V. Satzinger, J. Stampfl, R. Liska:
    "Two-photon-induced thiol-ene polymerization as a fabrication tool for flexible optical waveguides";
    Designed Monomers and Polymers, (2013), 1 - 11.

  252. Authors: Josef Kupfmüller, E163-02-1; Klaus Stadlmann, E308-S; Zhiquan Li, E163-02-1; Valentin Satzinger, Joanneum Research; Jürgen Stampfl, E308-S; Robert Liska, E163-02-1

    J. Kupfmüller, K. Stadlmann, Z. Li, V. Satzinger, J. Stampfl, R. Liska:
    "Flexible optical interconnects via thiol-ene two-photon-induced polymerization";
    MRS Online Proceedings Library, 1438 Optical Interconnects (2013), 1438.

  253. Authors: Deniz Kurumlu, Ruhr-Univ. Bochum; E Payton; M Young; Michael Schöbel, E308-D; Guillermo Requena, E308-D; G. Eggeler

    D. Kurumlu, E Payton, M. Young, M. Schöbel, G. Requena, G. Eggeler:
    "High-temperature strength and damage evolution in short fiber reinforced aluminum alloys studied by miniature creep testing and synchrotron microtomography";
    Acta Materialia, 60 (2012), 1; 67 - 78.

    More information

  254. Authors: Ralf Lach, E308-S; Wolfgang Grellmann, M.-Luther-Universit.

    R. Lach, W. Grellmann:
    "Time- and Temperature-Dependent Fracture Mechanics of Polymers: General Aspects at Monotonic Quasi-Static and Impact Loading Conditions";
    Macromolecular Materials and Engineering, 293 (2008), 7; 555 - 567.

    More information

  255. Authors: R. Lach; Pavel Hutar; Petr Vesely; Eva Nezbedova; Zdenek Knesl; Thomas Koch, E308-S; C Bierögel; W. Grellmann

    R. Lach, P Hutar, P. Vesely, E. Nezbedova, Z Knesl, T. Koch, C. Bierögel, W. Grellmann:
    "Assessment with indentation techniques of the local mechanical behavior of joints in polymer parts";
    Polimery, 58 (2013), 11-12; 900 - 905.

    More information

  256. Authors: R. Lach; Sabine Seidler, E308-S; W. Grellmann

    R. Lach, S. Seidler, W. Grellmann:
    "Resistance against the Intrinsic Rate of Fracture Mechanics Parameters for Polymeric Materials under Moderate Impact Loading";
    Mechanics of Time-Dependent Materials, 9 (2005), 2-3; 103 - 119.

  257. Authors: David Lang, MU Leoben; Erwin Povoden-Karadeniz, E308-Gr Kozesch

    D. Lang, E. Povoden-Karadeniz et al.:
    "On the chemistry of the carbides in a molybdenum base Mo-Hf-C alloy produced by powder metallurgy";
    Journal of Alloys and Compounds, 654 (2016), 445 - 454.

  258. Authors: David Lang, MU Leoben; Erwin Povoden-Karadeniz, E308-Gr Kozesch; Jürgen Schatte; Wolfram Knabl; Helmut Clemens, Universität Leoben; Sophie Primig, UNSW Australia

    D. Lang, E. Povoden-Karadeniz, J. Schatte, W. Knabl, H. Clemens, S. Primig:
    "Thermodynamic evaluation of the Mo-rich corner of the Mo-Hf-C system including O impurities";
    Journal of Alloys and Compounds, 695 (2017), 372 - 381.

    More information

  259. Authors: Peter Lang, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    P. Lang, E. Kozeschnik:
    "Modellierung und Simulation zur Qualitätsverbesserung und Effizienzsteigerung";
    AluReport, 02.2013 (2013), 8 - 9.

  260. Authors: Peter Lang, E308-Gr Kozesch; Margit Christa Lang, E311-01-1; Ahmad Falahati, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    P. Lang, M. Lang, A. Falahati, E. Kozeschnik:
    "The Effect of Si on the Precipitation Behaviour in Al-Mg-Si Alloys Studied by Thermo-kinetic Simulation and DSC Experiments";
    Berg- und Hüttenmännische Monatshefte (BHM), 159 (2013), 3; 116 - 121.

    More information

  261. Authors: Peter Lang, E308-Gr Kozesch; Erwin Povoden-Karadeniz, E308-Gr Kozesch; Ahmad Falahati, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    P. Lang, E. Povoden-Karadeniz, A. Falahati, E. Kozeschnik:
    "Simulation of the effect of composition on the precipitation in 6xxx Al alloys during continuous-heating DSC";
    Journal of Alloys and Compounds, 612 (2014), 443 - 449.

  262. Authors: Peter Lang, Cambridge Univ; Markus Rath, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch; Pedro E.J. Rivera-Diaz-Del-Castillo, Cambridge University

    P. Lang, M. Rath, E. Kozeschnik, P. Rivera-Diaz-Del-Castillo:
    "Modelling the influence of austenitisation temperature on hydrogen trapping in Nb containing martensitic steels";
    Scripta Materialia, 101 (2015), 101; 60 - 63.

    More information

  263. Authors: Peter Lang, E308-Gr Kozesch; Yao Shan, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    P. Lang, Y.V. Shan, E. Kozeschnik:
    "The life-time of structural vacancies in the presence of solute trapping";
    Materials Science Forum, 794 - 796 (2014), 963 - 970.

    More information

  264. Authors: Peter Lang, E308-Gr Kozesch; Thomas Weisz, E308-Gr Kozesch; Mohammad Reza Ahmadi, E308-Gr Kozesch; Erwin Povoden-Karadeniz, E308-Gr Kozesch; Ahmad Falahati, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    P. Lang, T. Weisz, M.R. Ahmadi, E. Povoden-Karadeniz, A. Falahati, E. Kozeschnik:
    "Thermo-kinetic simulation of the yield strength evolution of AA7075 during natural aging";
    Advanced Materials Research, 922 (2014), 406 - 411.

    More information

  265. Authors: Peter Lang, E308-Gr Kozesch; Tomasz Wojcik, E308-Gr Kozesch; Erwin Povoden-Karadeniz, E308-Gr Kozesch; Ahmad Falahati, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    P. Lang, T. Wojcik, E. Povoden-Karadeniz, A. Falahati, E. Kozeschnik:
    "Thermo-kinetic prediction of metastable and stable phase precipitation in Al-Zn-Mg series aluminium alloys during non-isothermal DSC analysis";
    Journal of Alloys and Compounds, 609 (2014), 129 - 136.

    More information

  266. Authors: Peter Lang, E308-Gr Kozesch; Tomasz Wojcik, E308-Gr Kozesch; Erwin Povoden-Karadeniz, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    P. Lang, T. Wojcik, E. Povoden-Karadeniz, E. Kozeschnik et al.:
    "Crystal structure and free energy of Ti2Ni3 precipitates in Ti-Ni alloys from first principles";
    Computational Materials Science, 93 (2014), 46 - 49.

    More information

  267. Authors: Fernando Lasagni, E308-D; Hans-Peter Degischer, E308-D; M. Papakyriacou

    F. Lasagni, H.P. Degischer, M. Papakyriacou:
    "Influence of Solution Treatment, Sr-Modification and Short Fibre Reinforcement on the Eutectic Morphology of Al-Si Alloys";
    Praktische Metallographie - Practical Metallography, 43 (2006), 10; 505 - 519.

    More information

  268. Authors: Fernando Lasagni, E308-D; Hans-Peter Degischer, E308-D; M. Papakyriacou

    F. Lasagni, H.P. Degischer, M. Papakyriacou:
    "Morphological changes of Si in Al-Si alloys and a short fibre composite";
    Kovove Materialy - Metallic Materials, 44 (2006), 65 - 73.

    More information

  269. Authors: Fernando Lasagni, E308-D; Myriam Dumont; Côme Salamida; J Acuna; Hans-Peter Degischer, E308-D

    F. Lasagni, M. Dumont, C. Salamida, J. Acuna, H.P. Degischer:
    "Dilatometry revealing Si precipitation in Al-Si-alloys";
    International Journal of Materials Research, 100 (2009), 7; 1005 - 1013.

  270. Authors: Fernando Lasagni, E308-D; Ahmad Falahati, E308-D; H.R. Mohammadian, E308-D; Hans-Peter Degischer, E308-D

    F. Lasagni, A. Falahati, H. Mohammadian, H.P. Degischer:
    "Precipitation of Si revealed by dilatometry in Al-Si-Cu/Mg alloys";
    Kovove Materialy - Metallic Materials, 46 (2008), 1; 1 - 6.

    More information

  271. Authors: Fernando Lasagni, E308-D; Andrés Lasagni; Christian Holzapfel; Frank Mücklich; Hans-Peter Degischer, E308-D

    F. Lasagni, A. Lasagni, C. Holzapfel, F. Mücklich, H.P. Degischer:
    "Three Dimensional Characterization of Unmodified and Sr-Modified Al-Si Eutectics by FIB and FIB EDX Tomography";
    Advanced Materials, 8 (2006), 8; 719 - 723.

    More information

  272. Authors: Fernando Lasagni, E308-D; Andrés Lasagni; Esteban D. Marks, E308-D; Christian Holzapfel; Frank Mücklich; Hans-Peter Degischer, E308-D

    F. Lasagni, A. Lasagni, E. Marks, C. Holzapfel, F. Mücklich, H.P. Degischer:
    "Three dimensional characterization of "as cast" and solution treated AlSi12(Sr) alloys by high resolution FIB tomography";
    Acta Materialia, 55 (2007), 11; 3875 - 3882.

  273. Authors: Fernando Lasagni, E308-D; Bernhard Mingler; Myriam Dumont; Hans-Peter Degischer, E308-D

    F. Lasagni, B. Mingler, M. Dumont, H.P. Degischer:
    "Precipitation kinetics of Si in aluminium alloys";
    Materials Science and Engineering A, 480 (2008), 383 - 391.

    More information

  274. Authors: Fernando Lasagni, E308-D; Guillermo Requena, E308-D; Ewa Soppa

    F. Lasagni, G. Requena, E. Soppa:
    "In Situ Measurements of Local Strain in Heterogeneous Materials";
    Advanced Engineering Materials, 10 (2008), 1-2; 73 - 78.

    More information

  275. Authors: Heloise Lasfargues, E308-GrMayrh; Thomas Glechner, E308-GrMayrh; Christian Martin Koller, E308-GrMayrh; Valentina Paneta, Uppsala University; Daniel Primetzhofer, Department of Ph ...; Szilárd Kolozsvári, Plansee; David Holec, MU Leoben; Helmut Riedl, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh

    H. Lasfargues, T. Glechner, C.M. Koller, V. Paneta, D. Primetzhofer, S. Kolozsvári, D. Holec, H. Riedl, P.H. Mayrhofer:
    "Non-reactively sputtered ultra-high temperature Hf-C and Ta-C coatings";
    Surface & Coatings Technology, 309 (2017), 436 - 444.

    More information

  276. Authors: Anna Barbara Laska; V.-M. Archodoulaki, E308-S; Bernadette Duscher, E308-S

    A. Laska, V. Archodoulaki, B. Duscher:
    "Failure analysis of retrieved PE-UHMW acetabular liners";
    Journal of the Mechanical Behavior of Biomedical Materials, 61 (2016), 70 - 78.

  277. Authors: Petr Lazar, E134-01; Raimund Podloucky, Univ.Wien-PhysChem; Ernst Kozeschnik, E308-Gr Kozesch; Josef Redinger, E134-01

    P. Lazar, R. Podloucky, E. Kozeschnik, J. Redinger:
    "Density functional theory study of ternary V-Cr-N compounds";
    Physical Review B, 78 (2008), 1342021 - 1342028.

    More information

  278. Authors: Dietmar Leitlmeier; Hans-Peter Degischer, E308-D; H.J. Flankl

    D. Leitlmeier, H.P. Degischer, H. Flankl:
    "Development of a Foaming Process for Particulate Reinforced Aluminium Melts";
    Advanced Materials, Vol. 4 (2002), No. 10; 735 - 740.

  279. Authors: Dietmar Leitlmeier; Hans-Peter Degischer, E308-D; H.J. Flankl

    D. Leitlmeier, H.P. Degischer, H. Flankl:
    "Metallurgical prerequisites for the production of cellular aluminium castings direct from the melt";
    Casting Plant and Technology International, 19 (2003), 1; 20 - 30.

  280. Authors: Dietmar Leitlmeier; Hans-Peter Degischer, E308-D; H.J. Flankl

    D. Leitlmeier, H.P. Degischer, H. Flankl:
    "Metallurgische Voraussetzungen für die Herstellung von Aluminium-Schaumformteilen aus der Schmelze";
    Giesserei, 89 (2002), 11; 33 - 40.

  281. Authors: Dietmar Leitlmeier; Hans-Peter Degischer, E308-D; H.J. Flankl

    D. Leitlmeier, H.P. Degischer, H. Flankl:
    "Voraussetzungen für die Herstellung von Al-Schaumformteilen aus der Schmelze";
    It´s Time, 2 (2002), 2; 39 - 47.

  282. Authors: Karin Leitner, MU Leoben; Daniel Scheiber, MCL; S Jakob; Sophie Primig, UNSW Australia; Helmut Clemens, Universität Leoben; Erwin Povoden-Karadeniz, E308-Gr Kozesch; Lorenz Romaner, MCL

    K. Leitner, D. Scheiber, S. Jakob, S. Primig, H. Clemens, E. Povoden-Karadeniz, L. Romaner:
    "How grain boundary chemistry controls the fracture mode of molybdenum";
    Materials & Design, 142 (2018), 36 - 43.

  283. Authors: Thomas Leitner, ESI Leoben; Stephanie Sackl, CDL ESOP; Bernhard Völker; Helmut Riedl, E308-GrMayrh; Helmut Clemens, Universität Leoben; R. Pippan; Anton Hohenwarter, ESI Leoben

    T. Leitner, S. Sackl, B. Völker, H. Riedl, H. Clemens, R. Pippan, A. Hohenwarter:
    "Crack path identification in a nanostructured pearlitic steel using atom probe tomography";
    Scripta Materialia, 142 (2018), 66 - 69.

    More information

  284. Authors: Dejun Li; Dorel Anghelina; Denijel Burzic, E308-Gr Kozesch; Wilfried Krieger; Ernst Kozeschnik, E308-Gr Kozesch

    D. Li, D. Anghelina, D. Burzic, W. Krieger, E. Kozeschnik:
    "Investigation of Decarburization in Spring Steel Production Process - Part II: Simulation";
    Steel Research International, 80 (2009), 4; 304 - 310.

    More information

  285. Authors: Dejun Li; Dorel Anghelina; Denijel Burzic, E308-Gr Kozesch; Jörg Zamberger; Robert Kienreich; Herbert Schifferl; Wilfried Krieger; Ernst Kozeschnik, E308-Gr Kozesch

    D. Li, D. Anghelina, D. Burzic, J. Zamberger, R. Kienreich, H. Schifferl, W. Krieger, E. Kozeschnik:
    "Investigation of Decarburization in Spring Steel Production Process - Part I: Experiments";
    Steel Research International, 80 (2009), 4; 298 - 303.

    More information

  286. Authors: Zhiquan Li, E163-02-1; Aliasghar Ajami, E134-03; Evaldas Stankevičius, Phys.Sci.Techn.; Wolfgang Husinsky, E134-03; Gediminas Račiukaitis, Phys.Sci.Techn.; Jürgen Stampfl, E308-S; Robert Liska, E163-02-1; Aleksandr Ovsianikov, E308

    Z. Li, A. Ajami, E. Stankevičius, W. Husinsky, G. Račiukaitis, J. Stampfl, R. Liska, A. Ovsianikov:
    "3D photografting with aromatic azides: A comparison between three-photon and two-photon case";
    Optical Materials, 35 (2013), 1846 - 1851.

    More information

  287. Authors: Zhiquan Li, E163-02-1; Niklas Ulrich Pucher, E163-02-1; Klaus Cicha, E308-S; Jan Torgersen, E308-S; Samuel Ligon, E163-02-1; Aliasghar Ajami, E134-03; Wolfgang Husinsky, E134-03; Arnulf Rosspeintner, TU-Graz; Eric Vauthey, Univ. Genf; Sergej Naumov, Leibniz Institut ...; Tom Scherzer, Leibniz Institut ...; Jürgen Stampfl, E308-S; Robert Liska, E163-02-1

    Z. Li, N.U Pucher, K. Cicha, J. Torgersen, S. Ligon, A. Ajami, W. Husinsky, A. Rosspeintner, E. Vauthey, S. Naumov, T. Scherzer, J. Stampfl, R. Liska:
    "Straightforward Synthesis and Structure-Activity Relationship of Highly Efficient Initiators for Two-Photon Polymerization";
    Macromolecules, 46 (2013), 2; 352 - 361.

    More information

  288. Authors: Zhiquan Li, E163-02-1; Marton Imre Siklos, E163-02-1; Niklas Ulrich Pucher, E163-02-1; Klaus Cicha, E308-S; Aliasghar Ajami, E134-03; Wolfgang Husinsky, E134-03; Arnulf Rosspeintner, TU Graz; Eric Vauthey, Univ.Geneva; Georg Gscheidt, TU Graz; Jürgen Stampfl, E308-S; Robert Liska, E163-02-1

    Z. Li, M. Siklos, N.U Pucher, K. Cicha, A. Ajami, W. Husinsky, A. Rosspeintner, E. Vauthey, G. Gscheidt, J. Stampfl, R. Liska:
    "Synthesis and Structure-Activity Relationship of Several Aromatic Ketone-Based Two-Photon Initiators";
    Journal of Polymer Science Part A: Polymer Chemistry, 49 (2011), 3688 - 3699.

    More information

  289. Authors: Zhiquan Li, E163-02-1; Evaldas Stankevičius, Phys.Sci.Techn.; Aliasghar Ajami, E134-03; Gediminas Račiukaitis, Phys.Sci.Techn.; Wolfgang Husinsky, E134-03; Aleksandr Ovsianikov, E308; Jürgen Stampfl, E308-S; Robert Liska, E163-02-1

    Z. Li, E. Stankevičius, A. Ajami, G. Račiukaitis, W. Husinsky, A. Ovsianikov, J. Stampfl, R. Liska:
    "3D alkyne-azide cycloaddition: spatiotemporally controlled by combination of aryl azide photochemistry and two-photon grafting";
    Chemical Communications, 49 (2013), 7635 - 7637.

    More information

  290. Authors: Zhiquan Li, E163-02-1; Jan Torgersen, E308-S; Aliasghar Ajami, E134-03; S. Mühleder, Boltzmann Inst.; Xiaohua Qin, E163-02-1; Wolfgang Husinsky, E134-03; W. Holnthoner, Boltzmann Inst.; Aleksandr Ovsianikov, E308; Jürgen Stampfl, E308-S; Robert Liska, E163-02-1

    Z. Li, J. Torgersen, A. Ajami, S. Mühleder, X.H. Qin, W. Husinsky, W. Holnthoner, A. Ovsianikov, J. Stampfl, R. Liska:
    "Initiation efficiency and cytotoxicity of novel water-soluble two-photon photoinitiators for direct 3D microfabrication of hydrogels";
    RSC Advances, 36 (2013), 15939 - 15946.

    More information

  291. Authors: Helga C. Lichtenegger, E308-S; Henrik Birkedal; Diego M Casa; J. O. Cross; S. M. Heald; J.H. Waite; Galen D. Stucky

    H. Lichtenegger, H. Birkedal, D. Casa, J. Cross, S. M. Heald, J.H. Waite, G. D. Stucky:
    "Distribution and role of trace metals in copper-mineralized Glycera worm jaw";
    Chemistry of Materials, 17 (2005), 2927 - 2931.

  292. Authors: Helga C. Lichtenegger, E308-S; Th. Schöberl; Michael H. Bartl; J.H. Waite; Galen D. Stucky

    H. Lichtenegger, T. Schöberl, M. Bartl, J.H. Waite, G. D. Stucky:
    "Response to Comment on: High abrasion resistance with sparse mineralization: copper biomineral in worm jaws";
    Science, 301 (2003), 1049b.

  293. Authors: Helga C. Lichtenegger, E308-S; Th. Schöberl; J.T. Ruokolainen; J. O. Cross; S. M. Heald; Henrik Birkedal; J.H. Waite; Galen D. Stucky

    H. Lichtenegger, T. Schöberl, J. Ruokolainen, J. Cross, S. M. Heald, H. Birkedal, J.H. Waite, G. D. Stucky:
    "Zinc and mechanical prowess in the jaws of Nereis, a sediment worm";
    PNAS - Proceedings of the National Academy of Sciences of the United States of America, 100 (2003), 16; 9144 - 9149.

  294. Authors: Samuel Ligon, E163-02-1; Stefan Baudis, E163-02-1; Franziska Nehl, E163-02-1; Helga Bergmeister, MedUni Wien; Anneliese Nigisch, Med-Uni Wien; Jürgen Stampfl, E308-S; Robert Liska, E163-02-1; Branislav Husar, E163-02-1

    S. Ligon, S. Baudis, F. Nehl, H. Bergmeister, A. Nigisch, J. Stampfl, R. Liska, B. Husar:
    "Improved elastomeric materials for CAD/CAM generation of vascular structures in soft tissue replacement therapies";
    Journal of Tissue Engineering and Regenerative Medicine, 6 (2012), Supplement 1; 301.

    More information

  295. Authors: Samuel Ligon, E163-02-1; Robert Liska, E163-02-1; Jürgen Stampfl, E308-S; Mathias Gurr, Universitä ...; Rolf Mulhaupt, Universitä ...

    S. Ligon, R. Liska, J. Stampfl, M. Gurr, R. Mulhaupt:
    "Polymers for 3D Printing and Customized Additive Manufacturing";
    Chemical Reviews, 117 (2017), 15; 10212 - 10290.

    More information

  296. Authors: Samuel Ligon, E163-02-1; Martin Schwentenwein, E163-02-1; Christian Gorsche, E163-02-1; Jürgen Stampfl, E308-S; Robert Liska, E163-02-1

    S. Ligon, M. Schwentenwein, C. Gorsche, J. Stampfl, R. Liska:
    "Toughening of photo-curable polymer networks: a review";
    Polymer Chemistry, 7 (2016), 257 - 286.

    More information

  297. Authors: E.B.F. Lima; Anke Pyzalla, E308-P; W. Reimers, TU Berlin; J.-C. Kuo; D. Raabe

    E. Lima, A. Pyzalla, W. Reimers, J. Kuo, D. Raabe:
    "Mosaic size distributions in an aluminum bi-crystal deformed by channel die plain strain compression";
    Journal of Neutron Research, 11 (2003), 209 - 214.

  298. Authors: E.B.F. Lima; J. Wegener; C. Dalle Donne; G. Goerigk; T. Wroblewski; Thomas Buslaps; Anke Pyzalla, E308-P; W. Reimers, TU Berlin

    E. Lima, J. Wegener, C. Dalle Donne, G. Goerigk, T. Wroblewski, T. Buslaps, A. Pyzalla, W. Reimers:
    "Dependence of the microstructure, residual stresses and texture of AA 6013 friction stir welds on the welding proces";
    Zeitschrift für Metallkunde, 94 (2003), 8; 908 - 915.

  299. Authors: Robert Liska, E163-02-1; Monika Schuster, E163-02-1; Robert Inführ, E308-S; Claudia Turecek, L. Boltzmann Inst.; Christina Fritscher, E308-S; Bernhard Seidl, E163-02-1; Volker Schmidt, Joanneum R., Weiz/A; Ladislav Kuna; Anja Haase, Joanneum; Franz Varga, LBIO; Helga C. Lichtenegger, E308-S; Jürgen Stampfl, E308-S

    R. Liska, M. Schuster, R. Inführ, C. Turecek, C. Fritscher, B. Seidl, V. Schmidt, L. Kuna, A. Haase, F. Varga, H. Lichtenegger, J. Stampfl:
    "Photopolymers for rapid prototyping";
    Journal of Coating Technology and Research, 4 (2007), 4; 505 - 510.

    More information

  300. Authors: Robert Liska, E163-02-1; Florian Schwager, E163-02-1; R. Cano Vives; Christine Maier, E308-S; Jürgen Stampfl, E308-S

    R. Liska, F. Schwager, R. Cano Vives, C. Maier, J. Stampfl:
    "Water-soluble photopolymers for rapid prototyping of cellular materials";
    Journal of Applied Polymer Science, 97 (2005), 2286 - 2298.

    More information

  301. Authors: Robert Liska, E163-02-1; Florian Schwager, E163-02-1; Rafael Cano Vives; Jürgen Stampfl, E308-S

    R. Liska, F. Schwager, R. Cano Vives, J. Stampfl:
    "New photopolymers for rapid prototyping of cellular structures";
    Polymer Preprints, 45 (2004), 77 - 78.

  302. Authors: Yijin Liu; F. Meirer, E141-05; Junyue Wang; Guillermo Requena, E308-D

    Y Liu, F. Meirer, J. Wang, G. Requena et al.:
    "3D elemental sensitive imaging using transmission X-ray microscopy";
    Analytical and Bioanalytical Chemistry, 404 (2012), 5; 1297 - 1301.

  303. Authors: Martin Lückl, E308-Gr Kozesch; Ozan Caliskanoglu, TU Graz; Sergiu Ilie, voestalpine AG; Jakob Six, voestalpine AG; Ernst Kozeschnik, E308-Gr Kozesch

    M. Lückl, O. Caliskanoglu, S. Ilie, J. Six, E. Kozeschnik:
    "Impact of Surface Structure Control Cooling during Continuous Casting on Hot Ductility of Microallyed Steel";
    Steel Research International, 87 (2016), 871 - 879.

    More information

  304. Authors: Martin Lückl, E308-Gr Kozesch; Tomasz Wojcik, E308-Gr Kozesch; Erwin Povoden-Karadeniz, E308-Gr Kozesch; Sabine Zamberger, VASD; Ernst Kozeschnik, E308-Gr Kozesch

    M. Lückl, T. Wojcik, E. Povoden-Karadeniz, S. Zamberger, E. Kozeschnik:
    "Co-Precipitation Behavior of MnS and AlN in a Low-Carbon Steel";
    Steel Research International, 89 (2018), 3; 1700342 - 1700350.

    More information

  305. Authors: Martin Lückl, E308-Gr Kozesch; Sabine Zamberger, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    M. Lückl, S. Zamberger, E. Kozeschnik:
    "Kinetics Simulation of MnS Precipitation in Electrical Steel";
    Steel Research International, 87 (2016), 271 - 275.

    More information

  306. Authors: Sigrid Lüftl, E308-S; V.-M. Archodoulaki, E308-S; M. Glantschnig; Sabine Seidler, E308-S

    S. Lüftl, V. Archodoulaki, M. Glantschnig, S. Seidler:
    "Influence of coloration on initial material properties and on thermooxidative ageing of a polyoxymethylene copolymer";
    Journal of Materials Science, 42 (2007), 1351 - 1359.

  307. Authors: Sigrid Lüftl, E308-S; V.-M. Archodoulaki, E308-S; Thomas Koch, E308-S; Sabine Seidler, E308-S

    S. Lüftl, V. Archodoulaki, T. Koch, S. Seidler:
    "Effects of the additive package on the thermal properties of a commercial polyoxymethylene homopolymer";
    Journal of Vinyl & Additive Technology, 14 (2008), 1; 21 - 27.

  308. Authors: Sigrid Lüftl, E308-S; V.-M. Archodoulaki, E308-S; Sabine Seidler, E308-S

    S. Lüftl, V. Archodoulaki, S. Seidler:
    "Thermal-oxidative induced degradation behaviour of polyoxymethylene (POM) copolymer detected by TGA/MS*";
    Polymer Degradation and Stability, 91 (2006), 464 - 471.

  309. Authors: Sigrid Lüftl, E308-S; Bruno Balluch, E366-AEM; Walter Smetana, E366-AEM; Sabine Seidler, E308-S

    S. Lüftl, B. Balluch, W. Smetana, S. Seidler:
    "Kinetic study of the polymeric binder burnout in green low temperture co-fired ceramic tapes";
    Journal of Thermal Analysis and Calorimetry, 103 (2011), 1; 157 - 162.

    More information

  310. Authors: Markus Lunzer, E163-02-1; Liyang Shi, Uppsala University; Orestis G. Andriotis, E317-02-1; Peter Gruber, E308-S; Marica Markovic, E308-S; Philipp J. Thurner, E317-02-1; Dimitri Ossipov, Uppsala University; Robert Liska, E163-02-1; Aleksandr Ovsianikov, E308-S

    M. Lunzer, L. Shi, O.G. Andriotis, P. Gruber, M. Markovic, P.J. Thurner, D. Ossipov, R. Liska, A. Ovsianikov:
    "A Modular Approach to Sensitized Two-Photon Patterning of Photodegradable Hydrogels";
    Angewandte Chemie, 130 (2018), 46; 15342 - 15347.

    More information

  311. Authors: Markus Lunzer, E163-02-1; Liyang Shi, Uppsala University; Orestis G. Andriotis, E317-02-1; Peter Gruber, E308-S; Marica Markovic, E308-S; Philipp J. Thurner, E317-02-1; Dimitri Ossipov, Uppsala University; Robert Liska, E163-02-1; Aleksandr Ovsianikov, E308-S

    M. Lunzer, L. Shi, O.G. Andriotis, P. Gruber, M. Markovic, P.J. Thurner, D. Ossipov, R. Liska, A. Ovsianikov:
    "A Modular Approach to Sensitized Two-Photon Patterning of Photodegradable Hydrogels";
    Angewandte Chemie International Edition, 57 (2018), 46; 15122 - 15127.

    More information

  312. Authors: Mathias Luxner, E317-01; Jürgen Stampfl, E308-S; Heinz E. Pettermann, E317-01

    M.H. Luxner, J. Stampfl, H. E. Pettermann:
    "Finite Element Modeling Concepts and Linear Analyses of 3D Regular Open Cell Structures";
    Journal of Materials Science, 40 (2005), 22; 5859 - 5866.

    More information

  313. Authors: Mathias Luxner; Jürgen Stampfl, E308-S; Heinz E. Pettermann, E317-01

    M.H. Luxner, J. Stampfl, H. E. Pettermann:
    "Nonlinear Simulations on the Interaction of Disorder and Defects in Open Cell Structures";
    Computational Materials Science, 47 (2009), 2; 418 - 428.

    More information

  314. Authors: Mathias Luxner, E317-01; Jürgen Stampfl, E308-S; Heinz E. Pettermann, E317-01

    M.H. Luxner, J. Stampfl, H. E. Pettermann:
    "Numerical simulations of 3D open cell structures - Influence of structural irregularities on elasto-plasticity and deformation localization";
    International Journal of Solids and Structures, 44 (2007), 2990 - 3003.

    More information

  315. Authors: Mathias Luxner, E317-01; Alexander Woesz; Jürgen Stampfl, E308-S; Peter Fratzl; Heinz E. Pettermann, E317-01

    M.H. Luxner, A. Woesz, J. Stampfl, P. Fratzl, H. E. Pettermann:
    "A Finite Element Study on the Effects of Disorder in Cellular Structures";
    Acta Biomaterialia, 5 (2009), 381 - 390.

    More information

  316. Authors: Mehran Maalekian, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    M. Maalekian, E. Kozeschnik:
    "A thermodynamic model for carbon trapping in lattice defects";
    CALPHAD - Computer Coupling of Phase Diagrams and Thermochemistry, 32 (2008), 650 - 654.

  317. Authors: Mehran Maalekian, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    M. Maalekian, E. Kozeschnik:
    "Modeling mechanical effects on promotion and retardation of martensitic transformation";
    Materials Science and Engineering A, 528 (2010), 1318 - 1325.

  318. Authors: Mehran Maalekian, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    M. Maalekian, E. Kozeschnik:
    "Modeling the effect of stress and plastic strain on martensite transformation";
    Materials Science Forum, 638-642 (2010), 2634 - 2639.

  319. Authors: Mehran Maalekian, E308-Gr Kozesch; Rene Radis, IWS TU Graz; Matthias Militzer; A. Moreau, IMI Boucherville; Warren J. Poole, CMPE Vancouver

    M. Maalekian, R. Radis, M. Militzer, A. Moreau, W. Poole:
    "In situ measurement and modelling of austenite grain growth in a Ti/Nb microalloyed steel";
    Acta Materialia, 60 (2012), 3; 1015 - 1026.

    More information

  320. Authors: Christian Maier, Fronius; Sigrid Lüftl, E308-S; Ernst Kozeschnik, E308-Gr Kozesch

    C. Maier, S. Lüftl, E. Kozeschnik:
    "Study of molten metal droplet adhesion to organic anti-spatter coatings";
    Science and Technology of Welding and Joining, 19 (2014), 8; 638 - 645.

  321. Authors: Denise Mandt, E308-S; Peter Gruber, E308-S; Marica Markovic, E308-S; Maximilian Tromayer, E163-02-1; Mario Rothbauer, E163-03-1; Sebastian Rudi Adam Krayz, E163; Syed Faheem Ali, E163; Jasper Van Hoorick, Polymer Chemistr ...; Wolfgang Halnthoner, LBI Vienna; Severin Mühleder, LBI; Peter Dubruel, Univ. Gent; Sandra van Vlierberghe, TU Ghent; Peter Ertl, E163-03-1, E164-02-3; Robert Liska, E163-02-1; Aleksandr Ovsianikov, E308-S

    D. Mandt, P. Gruber, M. Markovic, M. Tromayer, M. Rothbauer, S. Krayz, S. Ali, J. Van Hoorick, W. Halnthoner, S Mühleder, P. Dubruel, S. van Vlierberghe, P. Ertl, R. Liska, A. Ovsianikov:
    "Fabrication of placental barrier structures within a microfluidic device utilizing two-photon polymerization";
    International Journal of Bioprinting, 4 (2018), 1 - 12.

    More information

  322. Authors: Inderchand Manjubala; Alexander Woesz; Ingrid Pilz; M. Rumpler; N. Fratzl-Zelman; P. Roschger; Jürgen Stampfl, E308-S; Peter Fratzl

    I. Manjubala, A. Woesz, I. Pilz, M. Rumpler, N. Fratzl-Zelman, P. Roschger, J. Stampfl, P. Fratzl:
    "Biomimetic mineral-organic composite scaffolds with controlled internal architecture";
    Journal of Materials Science-Materials in Medicine, 16 (2005), 12; 1111 - 1119.

    More information

  323. Authors: W. Marketz; Cecilia Poletti, E308-D; Hans-Peter Degischer, E308-D

    W. Marketz, C. Poletti, H.P. Degischer:
    "Ti-Matrix Composites for Future High Performance Applications";
    Berg- und Hüttenmännische Monatshefte (BHM), 148 (2003), 9; 376 - 379.

  324. Authors: Marica Markovic, E308-S; Jasper Van Hoorick, Polymer Chemistr ...; Katja Hölzl, E308-S; Maximilian Tromayer, E163-02-1; Peter Gruber, E308-S; Sylvia Nürnberger, MedUni Vienna; Peter Dubruel, Polymer Chemistr ...; Sandra Van Vlierberghe, Polymer Chemistr ...; Robert Liska, E163-02-1; Aleksandr Ovsianikov, E308

    M. Markovic, J. Van Hoorick, K. Hölzl, M. Tromayer, P. Gruber, S. Nürnberger, P. Dubruel, S. Van Vlierberghe, R. Liska, A. Ovsianikov:
    "Hybrid Tissue Engineering Scaffolds by Combination of Three-Dimensional Printing and Cell Photoencapsulation";
    J. Nanotechnol. Eng. Med, 6 (2015), 2; 021001 - 021008.

    More information

  325. Authors: Esteban D. Marks, E308-D; Guillermo Requena, E308-D; Hans-Peter Degischer, E308-D; Elodie Boller

    E. Marks, G. Requena, H.P. Degischer, E. Boller:
    "Microtomography and creep modeling of a short fiber reinforced aluminum piston alloy";
    Advanced Engineering Materials, 13 (2011), 3; 199 - 207.

    More information

  326. Authors: Ruth Markut-Kohl, E308-S; V.-M. Archodoulaki, E308-S; Sabine Seidler, E308-S; Gobert Skrbensky

    R. Markut-Kohl, V. Archodoulaki, S. Seidler, G. Skrbensky:
    "PE-UHMW in hip implants: Properties of Conventional and Crosslinked Prosthetic Components";
    Advanced Engineering Materials, 11 (2009), 10; B148 - B154.

  327. Authors: R Martins; L Lienert; L Margulies; Anke Pyzalla, E308-P

    R. Martins, L. Lienert, L. Margulies, A. Pyzalla:
    "Determination of the radial crystallite microstrain distribution within an AlMg3 torsion sample using monochromatic synchrotron radiation";
    Materials Science and Engineering A, 402 (2005), 278 - 287.

  328. Authors: Fanny Mas; C. Tassin; Ernst Kozeschnik, E308-Gr Kozesch; Francois Roch; P. Todeschini

    F. Mas, C. Tassin, E. Kozeschnik, F. Roch, P. Todeschini:
    "Microstructures formation and phase transformations around the interface of welds between dissimilar steels";
    MATEC Web of Conferences, Volume 7 (2013), 02001; 3 pages.

  329. Authors: Andreas Mautner, E163-02-1; Xiaohua Qin, E163-02-1; Barbara Kapeller, Medizinische Uni ...; Günther Russmüller, Medizinische Uni ...; Thomas Koch, E308-S; Jürgen Stampfl, E308-S; Robert Liska, E163-02-1

    A. Mautner, X.H. Qin, B. Kapeller, G. Russmüller, T. Koch, J. Stampfl, R. Liska:
    "Efficient Curing of Vinyl Carbonates by Thiol-Ene Polymerization";
    Macromolecular Rapid Communications, 33 (2012), 23; 2046 - 2052.

  330. Authors: Andreas Mautner, E163-02-1; Xiaohua Qin, E163-02-1; Harald Wutzel, E163-02-1; Barbara Kapeller, Medizinische Uni ...; Doris Moser, Med. Uni. Wien; Günther Russmüller, Medizinische Uni ...; Jürgen Stampfl, E308-S; Robert Liska, E163-02-1

    A. Mautner, X.H. Qin, H. Wutzel, B. Kapeller, D. Moser, G. Russmüller, J. Stampfl, R. Liska:
    "Thiol-Ene Photopolymerization for Efficient Curing of Vinyl Esters";
    Journal of Polymer Science Part A: Polymer Chemistry, 51 (2012), 1; 203 - 212.

  331. Authors: Andreas Mautner, E163-02-1; Barbara Steinbauer, E163; Sandra Orman, E163-02-1; Günther Russmüller, Medizinische Uni ...; Karin Macfelda, MedUni Wien; Thomas Koch, E308-S; Jürgen Stampfl, E308-S; Robert Liska, E163-02-1

    A. Mautner, B. Steinbauer, S. Orman, G. Russmüller, K. Macfelda, T. Koch, J. Stampfl, R. Liska:
    "Tough photopolymers based on vinyl esters for biomedical applications";
    Journal of Polymer Science Part A: Polymer Chemistry, 54 (2016), 13; 1987 - 1997.

  332. Authors: Andreas Mautner, E163-02-1; Barbara Steinbauer, E163; Günther Russmüller, Medizinische Uni ...; Roman Lieber, Medizinische Uni ...; Thomas Koch, E308-S; Jürgen Stampfl, E308-S; Robert Liska, E163-02-1

    A. Mautner, B. Steinbauer, G. Russmüller, R. Lieber, T. Koch, J. Stampfl, R. Liska:
    "Vinyl carbonate photopolymers with improved mechanical properties for biomedical applications";
    Designed Monomers and Polymers, 19 (2016), 5; 437 - 444.

    More information

  333. Authors: Paul Heinz Mayrhofer, E308-GrMayrh; Alexander Kirnbauer, E308-GrMayrh; Philipp Ertelthaler, E308-GrMayrh; Christian Martin Koller, E308-GrMayrh

    P.H. Mayrhofer, A Kirnbauer, Ph Ertelthaler, C.M. Koller:
    "High-entropy ceramic thin films; A case study on transition metal diborides";
    Scripta Materialia, 149 (2018), 149; 93 - 97.

  334. Authors: Paul Heinz Mayrhofer, E308-GrMayrh; Doris Sonnleitner, MUL; Matthias Bartosik, E308-GrMayrh; David Holec, E308-GrMayrh

    P.H. Mayrhofer, D. Sonnleitner, M. Bartosik, D. Holec:
    "Structural and mechanical evolution of reactively and non-reactively sputtered Zr-Al-N thin films during annealing";
    Surface & Coatings Technology, 244 (2014), 52 - 56.

  335. Authors: Patrick Mayrhofer, E366-MST; Christoph Eisenmenger-Sittner, E138-03; Holger Euchner, E308-GrMayrh; Achim Bittner, E366-MST; Ulrich Schmid, E366-MST

    P.M. Mayrhofer, C. Eisenmenger-Sittner, H. Euchner, A. Bittner, U. Schmid:
    "Influence of c-axis orientation and scandium concentration on infrared active modes of magnetron sputtered ScxAl1-xN thin films";
    Applied Physics Letters, 103 (2013).

    More information

  336. Authors: Patrick Mayrhofer, E366-MST; Christoph Eisenmenger-Sittner, E138-03; Michael Stöger-Pollach, E057B; Holger Euchner, E308-GrMayrh; Achim Bittner, E366-MST; Ulrich Schmid, E366-MST

    P.M. Mayrhofer, C. Eisenmenger-Sittner, M. Stöger-Pollach, H. Euchner, A. Bittner, U. Schmid:
    "The impact of argon admixture on the c-axis oriented growth of direct current magnetron sputtered ScxAl1xN thin films";
    Journal of Applied Physics, 115 (2014), 19; 193505; 1 - 9.

    More information

  337. Authors: Patrick Mayrhofer, E366-MST; Holger Euchner, E308-GrMayrh; Achim Bittner, E366-MST; Ulrich Schmid, E366-MST

    P.M. Mayrhofer, H. Euchner, A. Bittner, U. Schmid:
    "Circular test structure for the determination of piezoelectric constants of ScxAl1−xN thin films applying Laser Doppler Vibrometry and FEM simulations";
    Sensors and Actuators A: Physical, 222 (2015), 301 - 308.

    More information

  338. Authors: Patrick Mayrhofer, E366-MST; Helmut Riedl, E308-GrMayrh; Holger Euchner, E308-GrMayrh; Michael Stöger-Pollach, E057B; Paul Heinz Mayrhofer, E308-GrMayrh; Achim Bittner, E366-MST; Ulrich Schmid, E366-MST

    P.M. Mayrhofer, H. Riedl, H. Euchner, M. Stöger-Pollach, P.H. Mayrhofer, A. Bittner, U. Schmid:
    "Microstructure and piezoelectric response of YxAl1−xN thin films";
    Acta Materialia, 100 (2015), 81 - 89.

    More information

  339. Authors: Katica Milos, E164-03-3; Herbert Danninger, E164-03-3; Gerhard Jangg, E164-03-3; Hans-Peter Degischer, E308-D

    K. Milos, H. Danninger, G. Jangg, H.P. Degischer:
    "Mechanical properties and dry sliding wear behaviour of extruded Al-Al2O3 PM composites";
    Powder Metall. Progress, 9 (2009), 4; 191 - 204.

  340. Authors: Gerald Mitteramskogler, E308-S; Robert Gmeiner, E308-S; Ruth Felzmann, E308-S; Christoph Hofstetter, E308-S; Simon Gruber, E308-S; Jürgen Stampfl, E308-S; Ebert, IVAG; Wolfgang Wachter, IVAG; Jürgen Laubersheimer, IVAG

    G. Mitteramskogler, R. Gmeiner, R. Felzmann, C. Hofstetter, S. Gruber, J. Stampfl, Ebert, W. Wachter, J. Laubersheimer:
    "Light curing strategies for lithography-based additive manufacturing of customized ceramics";
    Additive Manufacturing, 1 (2014), 1; 110 - 118.

    More information

  341. Authors: Moritz Mitterbauer, E163-02-1; Patrick Knaack, E163-02-1; Sergej Naumov, Leibniz Institut ...; Marica Markovic, E308-S; Aleksandr Ovsianikov, E308-S; Norbert Moszner, Ivoclar Vivadent; Robert Liska, E163-02-1

    M. Mitterbauer, P. Knaack, S. Naumov, M. Markovic, A. Ovsianikov, N. Moszner, R. Liska:
    "Acylstannane: Spaltbare und hochreaktive Photoinitiatoren für radikalische Photopolymerisationen bei Wellenlängen über 500 nm mit exzellentem Photobleaching";
    Angewandte Chemie, 130 (2018), 37; 12323 - 12327.

    More information

  342. Authors: Moritz Mitterbauer, E163-02-1; Patrick Knaack, E163-02-1; Sergej Naumov, Leibniz Institut ...; Marica Markovic, E308-S; Aleksandr Ovsianikov, E308-S; Norbert Moszner, Ivoclar Vivadent; Robert Liska, E163-02-1

    M. Mitterbauer, P. Knaack, S. Naumov, M. Markovic, A. Ovsianikov, N. Moszner, R. Liska:
    "Acylstannanes: Cleavable and Highly Reactive Photoinitiators for Radical Photopolymerization at Wavelengths above 500 nm with Excellent Photobleaching Behavior";
    Angewandte Chemie - International Edition, 57 (2018), 37; 12146 - 12150.

    More information

  343. Authors: Ashkan Monfared, Stanford University; Gerald Mitteramskogler, E308-S; Simon Gruber, E308-S; Kenneth Salisbury, Stanford University; Jürgen Stampfl, E308-S; Nikolas Blevins, Stanford University

    A. Monfared, G. Mitteramskogler, S. Gruber, K. Salisbury, J. Stampfl, N. Blevins:
    "High-Fidelity, Inexpensive Surgical Middle Ear Simulator";
    Otology & Neurotology, 33 (2012), 9; 1573 - 1577.

    More information

  344. Authors: Vincent Moraes, E308-GrMayrh; Hamid Bolvardi, Oerlikon Balzers; Szilard Koloszvári, Plansee; Helmut Riedl, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh

    V. Moraes, H. Bolvardi, S. Koloszvári, H. Riedl, P.H. Mayrhofer:
    "Thermal stability and mechanical properties of Ti-Al-B-N thin films";
    International Journal of Refractory Metals & Hard Materials, 71 (2018), 320 - 324.

    More information

  345. Authors: Vincent Moraes, E308-GrMayrh; Christoph Fuger, E308-GrMayrh; Valentina Paneta, Uppsala University; Daniel Primetzhofer, Department of Ph ...; Peter Polcik, Plansee; Hamid Bolvardi, Oerlikon Balzers; Mirjam Arndt, Balzers; Helmut Riedl, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh

    V. Moraes, C. Fuger, V. Paneta, D. Primetzhofer, P. Polcik, H. Bolvardi, M. Arndt, H. Riedl, P.H. Mayrhofer:
    "Substoichiometry and tantalum dependent thermal stability of α-structured W-Ta-B";
    Scripta Materialia, 155 (2018), 5 - 10.

  346. Authors: Vincent Moraes, E308-GrMayrh; Helmut Riedl, E308-GrMayrh; Christoph Fuger, E308-GrMayrh; Peter Polcik, Plansee; Hamid Bolvardi, Oerlikon Balzers; David Holec, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh

    V. Moraes, H. Riedl, C. Fuger, P. Polcik, H. Bolvardi, D. Holec, P.H. Mayrhofer:
    "Ab initio inspired design of ternary boride thin films";
    Scientific Reports, 8 (2018), 9288; 1 - 9.

    More information

  347. Authors: Vincent Moraes, E308-GrMayrh; Helmut Riedl, E308-GrMayrh; R. Rachbauer, Oerlikon Balzers; S. Kolozsvari, Plansee Composite; Matthias Ikeda, E138; Lukas Prochaska, E138-04; Silke Paschen, E138-04; Paul Heinz Mayrhofer, E308-GrMayrh

    V. Moraes, H. Riedl, R. Rachbauer, S. Kolozsvari, M. Ikeda, L. Prochaska, S. Paschen, P.H. Mayrhofer:
    "Thermal conductivity and mechanical properties of AlN-based thin films";
    Journal of Applied Physics, 119 (2016), 225304-1 - 225304-10.

    More information

  348. Authors: Frank Moszner, ETH Zürich; Erwin Povoden-Karadeniz, E308-Gr Kozesch; Stefan Pogatscher, ETH Zürich; Peter J. Uggowitzer; Y Estrin, Monash Univ; Stephan Gerstl, ETH Zürich; Ernst Kozeschnik, E308-Gr Kozesch; Jörg Löffler, ETH Zürich

    F Moszner, E. Povoden-Karadeniz, S Pogatscher, P.J. Uggowitzer, Y. Estrin, Ssa Gerstl, E. Kozeschnik, Jf Löffler:
    "Reverse alpha' -> gamma transformation mechanisms of martensitic Fe-Mn and age-hardenable Fe-Mn-Pd alloys upon fast and slow continuous heating";
    Acta Materialia, 72 (2014), 99 - 109.

  349. Authors: Severin Muehleder, Ludwig Boltzmann ...; Aleksandr Ovsianikov, E308; Johannes Zipperle, Ludwig Boltzmann ...; Heinz Redl, LBI; Wolfgang Holnthoner, LBI

    S. Muehleder, A. Ovsianikov, J. Zipperle, H. Redl, W Holnthoner:
    "Connections matter: channeled hydrogels to improve vascularization";
    Frontiers in Bioengineering and Biotechnology, 2 (2014), #.

    More information

  350. Authors: Tran Huu Nam, Hanoi University; Guillermo Requena, E308-D; Hans-Peter Degischer, E308-D

    T.H. Nam, G. Requena, H.P. Degischer:
    "Modelling and Numerical Computation of Thermal Expansion of Aluminium Matrix Composite with Densely Packed SiC Particles";
    Technische Mechanik, 28 (2008), Heft 3-4; 259 - 267.

  351. Authors: Tran Huu Nam, Hanoi University; Guillermo Requena, E308-D; Hans-Peter Degischer, E308-D

    T.H. Nam, G. Requena, H.P. Degischer:
    "Thermal expansion behaviour of aluminum matrix composites with densely packed SiC particles";
    Composites Part A: Applied Science and Manufacturing, 39 (2008), 5; 856 - 865.

    More information

  352. Authors: Matthias Nöhrer, CDLESOP - MU Leoben; Walter Mayer, E308-Gr Kozesch; Sophie Primig, MUL; Sabine Zamberger, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch; Harald Leitner, Böhler

    M. Nöhrer, W. Mayer, S. Primig, S. Zamberger, E. Kozeschnik, H. Leitner:
    "Influence of Deformation on the Precipitation Behavior of Nb(CN) in Austenite and Ferrite";
    Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 45A (2014), Sept; 4210 - 4219.

    More information

  353. Authors: Matthias Nöhrer, CDLESOP - MU Leoben; Walter Mayer, E308-Gr Kozesch; Sabine Zamberger, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch; Harald Leitner, Böhler

    M. Nöhrer, W. Mayer, S. Zamberger, E. Kozeschnik, H. Leitner:
    "Precipitation Behavior of Strain- Induced V Precipitates in Ferrite at Different Temperatures in a 0.2 wt% Carbon Steel";
    Steel Research International, 85 (2014), 4; 679 - 688.

    More information

  354. Authors: Sandra Orman, E163-02-1; Christoph Hofstetter, E308-S; A Aksu, Karl Leibinger M ...; Frank Reinauer, Karl Leibinger M ...; Robert Liska, E163-02-1; Stefan Baudis, E163-02-1

    S. Orman, C. Hofstetter, A. Aksu, F. Reinauer, R. Liska, S. Baudis:
    "Toughness enhancers for bone scaffold materials based on biocompatible photopolymers";
    Journal of Polymer Science Part A: Polymer Chemistry, 56 (2018), 24; 110 - 119.

    More information

  355. Authors: Aleksandr Ovsianikov, E308-S; Zhiquan Li, E163-02-1; Aliasghar Ajami, E134-03; Jan Torgersen, E308-S; Wolfgang Husinsky, E134-03; Jürgen Stampfl, E308-S; Robert Liska, E163-02-1

    A. Ovsianikov, Z. Li, A. Ajami, J. Torgersen, W. Husinsky, J. Stampfl, R. Liska:
    "3D grafting via three-photon induced photolysis of aromatic azides";
    Applied Physics A: Materials Science & Processing, 108 (2012), 1; 29 - 34.

    More information

  356. Authors: Aleksandr Ovsianikov, E308-S; Zhiquan Li, E163-02-1; Jan Torgersen, E308-S; Jürgen Stampfl, E308-S; Robert Liska, E163-02-1

    A. Ovsianikov, Z. Li, J. Torgersen, J. Stampfl, R. Liska:
    "Selective Functionalization of 3D Matrices Via Multiphoton Grafting and Subsequent Click Chemsitry";
    Advanced Functional Materials, 22 (2012), 16; 3429 - 3433.

    More information

  357. Authors: Aleksandr Ovsianikov, E308-S; Vladimir Mironov, E308-S; Jürgen Stampfl, E308-S; Robert Liska, E163-02-1

    A. Ovsianikov, V. Mironov, J. Stampfl, R. Liska:
    "Engineering 3D cell-culture matrices: multiphoton processing technologies for biological and tissue engineering applications";
    Expert Review of Medical Devices (invited), 9 (2012), 6; 613 - 633.

    More information

  358. Authors: Aleksandr Ovsianikov, E308-S; Severin Mühleder, LBI; Jan Torgersen, E308-S; Xiaohua Qin, E163-02-1; Li Zhiquan, E163-02-1; Sandra Van Vlierberghe; Peter Dubruel, Univ. Gent; Wolfgang Holnthoner, LBI; Heinz Redl, LBI; Robert Liska, E163-02-1; Jürgen Stampfl, E308-S

    A. Ovsianikov, S Mühleder, J. Torgersen, X.H. Qin, L. Zhiquan, S. Van Vlierberghe, P. Dubruel, W Holnthoner, H. Redl, R. Liska, J. Stampfl:
    "Laser Photofabrication of Cell-Containing Hydrogel Constructs";
    Langmuir, 30 (2014), 13; 7 pages.

    More information

  359. Authors: Stephane Pailhes; Holger Euchner, E308-GrMayrh; Valentina Giordano; Regis Debord; A Assy; S Gomes; Alexei Bosak; Didier Machon; Silke Paschen, E138-04; Marc de Boissieu

    S. Pailhes, H. Euchner, V. Giordano, R. Debord, A. Assy, S. Gomes, A. Bosak, D. Machon, S. Paschen, M. de Boissieu:
    "Localization of Propagative Phonons in a Perfectly Crystalline Solid";
    Physical Review Letters, 113 (2014), 2.

    More information

  360. Authors: Martin Palmstingl, E308-S; Thomas Koch, E308-S; Dietmar Salaberger, E308-S; Thomas Paier

    M Palmstingl, T. Koch, D. Salaberger, T. Paier:
    "Morphological impact on the fatigue behaviour of short fibre reinforced polypropylene";
    Materials Science Forum, 825 - 826 (2015), 830 - 837.

    More information

  361. Authors: Ileana Panaitescu, E308-S; Thomas Koch, E308-S; V.-M. Archodoulaki, E308-S

    I. Panaitescu, T. Koch, V. Archodoulaki:
    "Accelerated aging of a glass fiber/polyurethane composite for automotive applications";
    Polymer Testing, 74 (2019), 245 - 256.

    More information

  362. Authors: Ileana Panaitescu, E308-S; Thomas Koch, E308-S; V.-M. Archodoulaki, E308-S

    I. Panaitescu, T. Koch, V. Archodoulaki:
    "Effects of Temperature, Humidity and Automotive Fluids Exposure on Glass Fiber/Polyurethane Composites";
    Polymer Composites, 12 (2018).

  363. Authors: Jörg Ulrich Paulitsch, E308-GrMayrh; Richard Rachbauer; Jürgen Ramm; Peter Polcik, Plansee; Paul Heinz Mayrhofer, E308-GrMayrh

    J. Paulitsch, R. Rachbauer, J. Ramm, P. Polcik, P.H. Mayrhofer:
    "Influence of Si on the target oxide poisoning during reactive arc evaporation of (Al,Cr)2O3 coatings";
    Vacuum, 100 (2014), 29 - 32.

  364. Authors: A. Pauschitz; Samuel Kvasnica; Robin Jisa; Johannes Bernardi, E057B; Thomas Koch, E308-S; M. Roy

    A. Pauschitz, S Kvasnica, R Jisa, J. Bernardi, T. Koch, M. Roy:
    "Tribological behaviour of Ti containing nanocomposite DLC film under milli-Newton load range";
    Diamond and Related Materials, 17 (2008), 12; 2010 - 2018.

  365. Authors: Andreas Pauschitz, E366-MST; Johannes Schalko, E366-01; Thomas Koch, E308-S; Christoph Eisenmenger-Sittner, E138-03; Samuel Kvasnica, E366-MNS; M. Roy

    A. Pauschitz, J. Schalko, T. Koch, C. Eisenmenger-Sittner, S. Kvasnica, M. Roy:
    "Nanoindentation and AFM studies of PECVD DLC and reactively sputtered Ti containing carbon films";
    Bulletin of Materials Science, 26 (2003), 6; 585 - 591.

    More information

  366. Authors: Gernot Peer, E163-02-1; Peter Dorfinger, E308-S; Thomas Koch, E308-S; Jürgen Stampfl, E308-S; Christian Gorsche, E163-02-1; Robert Liska, E163-02-1

    G. Peer, P. Dorfinger, T. Koch, J. Stampfl, C. Gorsche, R. Liska:
    "Photopolymerization of Cyclopolymerizable Monomers and Their Application in Hot Lithography";
    Macromolecules, 51 (2018), 22; 9344 - 9353.

    More information

  367. Authors: Marcela Petrica, E308-S; Bernadette Duscher, E308-S; Thomas Koch, E308-S; V.-M. Archodoulaki, E308-S

    M. Petrica, B. Duscher, T. Koch, V. Archodoulaki:
    "Impact of surface roughness and contact pressure on wear behaviour of PEEK, POM, and PE-UHMW";
    International Journal Of Surface Science And Engineering, 11 (1) (2017), 65 - 84.

  368. Authors: Marcela Petrica, E308-S; Bernadette Duscher, E308-S; Thomas Koch, E308-S; V.-M. Archodoulaki, E308-S

    M. Petrica, B. Duscher, T. Koch, V. Archodoulaki:
    "Studies on tribological behavior of PEEK and PE-UHMW";
    AIP Conference Proceedings - American Institute of Physics, 1779 (2016), 1; 5 pages.

    More information

  369. Authors: Marcela Petrica, E308-S; Bernadette Duscher, E308-S; Thomas Koch, E308-S; V.-M. Archodoulaki, E308-S

    M. Petrica, B. Duscher, T. Koch, V. Archodoulaki:
    "Tribological investigations on virgin and accelerated aged PE-UHMW";
    Tribology International, 87 (2015), 151 - 159.

  370. Authors: Peter Petrochenko, USFDA; Jan Torgersen, E308-S; Peter Gruber, E308-S; Lucas Hicks, Joint Department ...; Jiwen Zheng, Office of Scienc ...; Girish Kumar, Office of Scienc ...; Roger Narayan, Joint Department ...; Peter Goering, Office of Scienc ...; Robert Liska, E163-02-1; Jürgen Stampfl, E308-S; Aleksandr Ovsianikov, E308

    P. Petrochenko, J. Torgersen, P. Gruber, L. Hicks, J. Zheng, G. Kumar, R. Narayan, P. Goering, R. Liska, J. Stampfl, A. Ovsianikov:
    "Laser 3D Printing with Sub‐Microscale Resolution of Porous Elastomeric Scaffolds for Supporting Human Bone Stem Cells";
    Advanced Healthcare Materials, # (2014), #; #.

    More information

  371. Authors: Markus Pfaffinger, E308-S; Malte Hartmann, E308-S; Martin Schwentenwein; Jürgen Stampfl, E308-S

    M. Pfaffinger, M. Hartmann, M. Schwentenwein, J. Stampfl:
    "Stabilization of tricalcium phosphate slurries against sedimentation for stereolithographic additive manufacturing and influence on the final mechanical properties";
    International Journal of Applied Ceramic Technology, 14 (2017), 4; 499 - 506.

    More information

  372. Authors: Martin Pfeiler-Deutschmann; Paul Heinz Mayrhofer, E308-GrMayrh; Kerstin Chladil; Marianne Penoy; Claude Michotte; Martin Kathrein; Christian Mitterer

    M. Pfeiler-Deutschmann, P.H. Mayrhofer, K. Chladil, M. Penoy, C. Michotte, M. Kathrein, C. Mitterer:
    "Effect of wavelength modulation of arc evaporated Ti-Al-N/Ti-Al-V-N multilayer coatings on microstructure and mechanical/tribological properties";
    Thin Solid Films, 581 (2015), 20 - 24.

  373. Authors: H. Pinto, E308-P; Giovanni Bruno

    H. Pinto, G. Bruno:
    "Formation and Relaxation of Coherency Strain in the Nickel-base Superalloy SC16 ";
    Journal of Synchrotron Radiation, 10 (2003), 148 - 153.

  374. Authors: H. Pinto, E308-P; Anke Pyzalla, E308-P; Kristin Assmus; W. Hübner; R Büscher; August Christian Fischer

    H. Pinto, A. Pyzalla, K. Assmus, W. Hübner, R. Büscher, A. Fischer:
    "The Effect of Hydrogen on the Deterioration of Austenitic Steels during Wear at Cryogenic Temperature";
    Wear, 259 (2005), 424 - 431.

  375. Authors: H. Pinto, E308-P; Anke Pyzalla, E308-P; W. Hübner; Kristin Assmus

    H. Pinto, A. Pyzalla, W. Hübner, K. Assmus:
    "Influence of environment, temperature and chemical composition on the microstructural deterioration of CrNi steels during friction";
    Materialwissenschaft und Werkstofftechnik, 35 (2004), 10/11; 716 - 721.

  376. Authors: H. Pinto, E308-P; Anke Pyzalla, E308-P; W. Reimers, TU Berlin; Thomas Buslaps; V. Honkimäki; L. Zhang; Y. Dabin

    H. Pinto, A. Pyzalla, W. Reimers, T. Buslaps, V. Honkimäki, L. Zhang, Y. Dabin:
    "Investigation of Synchrotron Radiation induced Damage in Thermal Aluminium Absorbers";
    Materials Science and Technology, 21 (2005), 19 - 26.

  377. Authors: H. Pinto, E308-P; Anke Pyzalla, E308-P; W. Reimers, TU Berlin; Thomas Buslaps; V. Honkimäki; L. Zhang; Y. Dabin

    H. Pinto, A. Pyzalla, W. Reimers, T. Buslaps, V. Honkimäki, L. Zhang, Y. Dabin:
    "Microstructural Damage in Thermal Absorbers induced by High Energy Synchrotron Light Irradiation";
    Journal of Neutron Research, 12 (2004), 189 - 194.

  378. Authors: Stefan Pogatscher, ETH Zürich; Ernst Kozeschnik, E308-Gr Kozesch; Helmut Antrekowitsch, MUL (NEM); Marion Werinos, MUL (NEM); Stephan Gerstl, ETH Zürich; Jörg Löffler, ETH Zürich; Peter J. Uggowitzer

    S Pogatscher, E. Kozeschnik, H. Antrekowitsch, M. Werinos, Ssa Gerstl, Jf Löffler, P.J. Uggowitzer:
    "Process-controlled suppression of natural aging in an Al-Mg-Si alloy";
    Scripta Materialia, 89 (2014), 53 - 56.

    More information

  379. Authors: Cecilia Poletti, E308-D; B Balog, Inst.Materials,Slova; Thomas Schubert; V Liedtke, ARC Seibersdorf; Christian Edtmaier, E164-03-1

    C. Poletti, B. Balog, T. Schubert, V. Liedtke, C. Edtmaier:
    "Production of titanium matrix composites reinforced with SiC particles";
    Composites Science and Technology, Volume 68 (2008), Issue 9; 2171 - 2177.

    More information

  380. Authors: Cecilia Poletti, E308-D; Martin Balog; Frantisek Simancik; Hans-Peter Degischer, E308-D

    C. Poletti, M. Balog, F. Simancik, H.P. Degischer:
    "High-temperature strength of compacted sub-micrometer";
    Acta Materialia, 58 (2010), 10; 3781 - 3789.

    More information

  381. Authors: Cecilia Poletti, E308-D; Hans-Peter Degischer, E308-D; S. Kremmer, BÖHLER GmbH; W. Marketz

    C. Poletti, H.P. Degischer, S. Kremmer, W. Marketz:
    "Processing maps of Ti662 unreinforced and reinforced with TiC particles according to dynamic models";
    Materials Science and Engineering A, 486 (2008), 1-2; 127 - 137.

    More information

  382. Authors: Cecilia Poletti, E308-D; Hajo Dieringa, GKSS Research Centre; Fernando Warchomicka, E308-D

    C. Poletti, H. Dieringa, F. Warchomicka:
    "Local deformation and processing maps of as-cast AZ31 alloy";
    Materials Science and Engineering A, 516 (2009), 1-2; 138 - 147.

    More information

  383. Authors: Cecilia Poletti, E308-D; G Hoeltl, E308-D

    C. Poletti, G. Hoeltl:
    "Mechanical properties of particle reinforced titanium and titanium alloys";
    Kovove Materialy - Metallic Materials, 48 (2010), 2; 87 - 95.

    More information

  384. Authors: Cecilia Poletti, E308-D; A Merstallinger; Thomas Schubert; W. Marketz; Hans-Peter Degischer, E308-D

    C. Poletti, A. Merstallinger, T. Schubert, W. Marketz, H.P. Degischer:
    "Wear and Friction Coefficient of Particle Reinforcd Ti-alloys";
    Materialwissenschaft und Werkstofftechnik, 35 (2004), 10/11; 741 - 749.

  385. Authors: Cecilia Poletti, E308-D; Guillermo Requena, E308-D; Domonkos Tolnai, E308-D; P Cloetens; Andreas Steiger-Thirsfeld, E057B

    C. Poletti, G. Requena, D. Tolnai, P. Cloetens, A. Steiger-Thirsfeld:
    "Characterization of the microstructure and damage mechanisms in a Ti6Al4V alloy modified with 1 wt.% B";
    Journal of Materials Research, 101 (2010), 1151 - 1157.

    More information

  386. Authors: Cecilia Poletti, E308-D; Marta Rodríguez-Hortalá, E308-D; Michael Hauser, E308-D; Christof Sommitsch, IWS - TU Graz

    C. Poletti, M. Rodríguez-Hortalá, M. Hauser, C. Sommitsch:
    "Microstructure development in hot deformed AA6082";
    Materials Science and Engineering A, A (2010), 528; 2413 - 2430.

    More information

  387. Authors: Cecilia Poletti, E308-D; Fernando Warchomicka, E308-D; Hans-Peter Degischer, E308-D

    C. Poletti, F. Warchomicka, H.P. Degischer:
    "Local deformation of Ti6Al4V modified 1 wt% B and 0.1 wt% C";
    Materials Science and Engineering A, 527 (2010), 4-6; 1109 - 1116.

    More information

  388. Authors: Cecilia Poletti, E308-D; Fernando Warchomicka, E308-D; Roman Okruch, E308; Heidemarie Knoblich, E308-D

    C. Poletti, F. Warchomicka, R. Okruch, H. Knoblich:
    "Microstructural features of AZ31 deformed at high temperatures";
    Praktische Metallographie - Practical Metallography, 47 (2010), 10; 3781 - 3789.

    More information

  389. Authors: Cecilia Poletti, TU Graz; Tomasz Wojcik, E308-Gr Kozesch; Christof Sommitsch, IWS - TU Graz

    C. Poletti, T. Wojcik, C. Sommitsch:
    "Hot Deformation of AA6082 Containing Fine Intermetallic Particles";
    Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, online first (2012), 1 - 10.

    More information

  390. Authors: Anna Porabka; V.-M. Archodoulaki, E308-S; Wolfgang Molnar; Jadwiga Laska

    A. Porabka, V. Archodoulaki, W. Molnar, J. Laska:
    "Wear behaviour of polyurethane composites with respect to the other mechanical properties";
    World Journal of Engineering, 11 (2014), 2; 139 - 146.

    More information

  391. Authors: Erwin Povoden-Karadeniz, E308-Gr Kozesch; Ming Chen; Toni Ivas; Anthony Nicholas Grundy; Ludwig Gauckler

    E. Povoden-Karadeniz, M. Chen, T. Ivas, A. Grundy, L.J. Gauckler:
    "Thermodynamic modeling of La2O3-SrO-Mn2O3-Cr2O3 for solid oxide fuel cell applications";
    Journal of Materials Research, 27 (2012), 15; 1915 - 1926.

    More information

  392. Authors: Erwin Povoden-Karadeniz, E308-Gr Kozesch; Diana Cirstea; Peter Lang, E308-Gr Kozesch; Tomasz Wojcik, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    E. Povoden-Karadeniz, D. Cirstea, P. Lang, T. Wojcik, E. Kozeschnik:
    "Thermodynamics of Ti-Ni shape memory alloys";
    CALPHAD - Computer Coupling of Phase Diagrams and Thermochemistry, 41 (2013), 10; 128 - 139.

  393. Authors: Erwin Povoden-Karadeniz, E308-Gr Kozesch; Elisabeth Eidenberger; Peter Lang, E308-Gr Kozesch; Georg Stechauner, E308-Gr Kozesch; Harald Leitner, Böhler; Ernst Kozeschnik, E308-Gr Kozesch

    E. Povoden-Karadeniz, E. Eidenberger, P. Lang, G. Stechauner, H. Leitner, E. Kozeschnik:
    "Simulation of precipitate evolution in Fe-25 Co-15 Mo with Si addition based on computational thermodynamics";
    Journal of Alloys and Compounds, 587 (2014), 158 - 170.

  394. Authors: Erwin Povoden-Karadeniz, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    E. Povoden-Karadeniz, E. Kozeschnik:
    "Simulation of Precipitation Kinetics and Precipitation Strengthening of B2-precipitates in Martensitic PH 13-8 Mo Steel";
    ISIJ International, 52 (2012), 4; 610 - 615.

    More information

  395. Authors: Erwin Povoden-Karadeniz, E308-Gr Kozesch; Peter Lang, Cambridge Univ; Frank Moszner, ETH Zürich; Stefan Pogatscher, ETH Zürich; Andrei Ruban, MCL; Peter J. Uggowitzer; Ernst Kozeschnik, E308-Gr Kozesch

    E. Povoden-Karadeniz, P. Lang, F Moszner, S Pogatscher, A. Ruban, P.J. Uggowitzer, E. Kozeschnik:
    "Thermodynamics of Pd-Mn phases and extension to the Fe-Mn-Pd system";
    CALPHAD - Computer Coupling of Phase Diagrams and Thermochemistry, 51 (2015), 314 - 333.

  396. Authors: Erwin Povoden-Karadeniz, E308-Gr Kozesch; Peter Lang, E308-Gr Kozesch; Piotr Warczok, E308-Gr Kozesch; Ahmad Falahati, E308-Gr Kozesch; Wu Jun; Ernst Kozeschnik, E308-Gr Kozesch

    E. Povoden-Karadeniz, P. Lang, P. Warczok, A. Falahati, W. Jun, E. Kozeschnik:
    "CALPHAD modeling of metastable phases in the Al-Mg-Si system";
    CALPHAD - Computer Coupling of Phase Diagrams and Thermochemistry, 43 (2013), 12; 94 - 104.

  397. Authors: Sophie Primig, MUL; Harald Leitner, Böhler; Ernst Kozeschnik, E308-Gr Kozesch

    S. Primig, H. Leitner, E. Kozeschnik:
    "Early Stages of Precipitation: Experiments and Modelling";
    Berg- und Hüttenmännische Monatshefte (BHM), 159 (2014), 1; 5 - 11.

    More information

  398. Authors: Sophie Primig, UNSW Australia; Georg Stechauner, MCL; Ernst Kozeschnik, E308-Gr Kozesch

    S. Primig, G. Stechauner, E. Kozeschnik:
    "Early Stages of Cu Precipitation in 15 - 5 PH Maraging Steel Revisited - Part I: Experimental Analysis";
    Steel Research International, 88 (2017), 1; 1 - 10.

    More information

  399. Authors: Niklas Ulrich Pucher, E163-02-1; Arnulf Rosspeintner, TU Graz; Valentin Satzinger; Volker Schmidt, Joanneum R., Weiz/A; Georg Gescheidt, TU Graz; Jürgen Stampfl, E308-S; Robert Liska, E163-02-1

    N.U Pucher, A. Rosspeintner, V. Satzinger, V. Schmidt, G. Gescheidt, J. Stampfl, R. Liska:
    "Structure-Activity Relationship in D-π-A-π-D-Based Photoinitiators for the Two-Photon-Induced Photopolymerization Process";
    Macromolecules, 42 (2009), 6519 - 6528.

    More information

  400. Authors: Niklas Ulrich Pucher, E163-02-1; Marton Imre Siklos, E163-02-1; Arnulf Rosspeintner, TU Graz; Aliasghar Ajami, E134-03; Klaus Cicha, E308-S; Georg Gscheidt, TU Graz; Wolfgang Husinsky, E134-03; Jürgen Stampfl, E308-S; Robert Liska, E163-02-1

    N.U Pucher, M. Siklos, A. Rosspeintner, A. Ajami, K. Cicha, G. Gscheidt, W. Husinsky, J. Stampfl, R. Liska:
    "Optimization of feature resolution, processing window & structuring time for the two-photon polymerization (2PP) process by the use of novel initiators";
    Proc. of LPM2010 - the 11th International Symposium on Laser Precision Microfabrication, - (2010), 1 - 6.

    More information

  401. Authors: Milan Pudar; Sabine Zamberger, E308-Gr Kozesch; K Spiradek-Hahn; Rene Radis, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    M. Pudar, S. Zamberger, K. Spiradek-Hahn, R. Radis, E. Kozeschnik:
    "Computational Analysis of Precipitation during Continuous Casting of Microalloyed Steel";
    Steel Research International, 81 (2010), 5; 372 - 380.

    More information

  402. Authors: Anke Pyzalla, E308-P; B. Camin; Thomas Buslaps; Marco Di Michiel; Heinz Kaminski, E308-P; Andreas Kottar, E308-D; A Pernack; W. Reimers, TU Berlin

    A. Pyzalla, B. Camin, T. Buslaps, M. Di Michiel, H. Kaminski, A. Kottar, A. Pernack, W. Reimers:
    "Simultaneous Tomography and Diffraction Analysis of Creep Damage";
    Science, 308 (2005), 92 - 95.

  403. Authors: Anke Pyzalla, E308-P; B. Camin; Thomas Buslaps; Marco Di Michiel; Heinz Kaminski, E308-P; Andreas Kottar, E308-D; A Pernack; W. Reimers, TU Berlin

    A. Pyzalla, B. Camin, T. Buslaps, M. Di Michiel, H. Kaminski, A. Kottar, A. Pernack, W. Reimers:
    "Tomography and Diffraction Analysis of Creep in a Multiphase Brass (Simultaneous Tomography and Diffraction Analysis of Creep Damage) - Supporting Online Material: Materials and Methods; Figs. S1 to S6; Movies S1 and S2";
    Science (Online Issue), http://www.sciencemag.org/cgi/content/full/308/571 (2005), 5718; 11 pages.

  404. Authors: Anke Pyzalla, E308-P; B. Reetz; A. Jaques; J.P. Feiereisen; O. Ferry; Thomas Buslaps; W. Reimers, TU Berlin

    A. Pyzalla, B. Reetz, A. Jaques, J. Feiereisen, O. Ferry, T. Buslaps, W. Reimers:
    "In-situ Investigation of Stress Relaxation in Al/Si - MMCs using High Energy Synchrotron Radiation";
    Zeitschrift für Metallkunde, 95 (2004), 7; 624 - 629.

  405. Authors: Anke Pyzalla, E308-P; B. Reetz; A. Jaques; J.P. Feiereisen; O. Ferry; Thomas Buslaps; W. Reimers, TU Berlin

    A. Pyzalla, B. Reetz, A. Jaques, J. Feiereisen, O. Ferry, T. Buslaps, W. Reimers:
    "Relaxation of Phase Specific Elastic Strains/Stresses During Deformation of Al/Si - MMCs";
    Journal of Neutron Research, 12 (2004), 135 - 140.

  406. Authors: Anke Pyzalla, E308-P; W. Reimers, TU Berlin

    A. Pyzalla, W. Reimers:
    "Kriechschädigung dreidimensional sichtbar gemacht";
    Physik in unserer Zeit, 36 (2005), 4; 155 - 156.

  407. Authors: Lin Qin, E308-Gr Kozesch; Alice Redermeier, E308-Gr Kozesch; Christoph Dellago, Universität Wien; Ernst Kozeschnik, E308-Gr Kozesch; Carina Karner, Universität Wien

    L. Qin, A. Redermeier, C. Dellago, E. Kozeschnik, C. Karner:
    "Rigid-lattice Monte Carlo study of nucleation kinetics in dilute bcc Fe- Cu alloys using statistical sampling techniques";
    Acta Materialia, 159 (2018), 429 - 438.

  408. Authors: Xiaohua Qin, E163-02-1; Peter Gruber, E308-S; Marica Markovic, E308-S; Birgit Plochberger, E134-04; Enrico Klotzsch, E134-04; Jürgen Stampfl, E308-S; Aleksandr Ovsianikov, E308-S; Robert Liska, E163-02-1

    X.H. Qin, P. Gruber, M. Markovic, B. Plochberger, E. Klotzsch, J. Stampfl, A. Ovsianikov, R. Liska:
    "Enzymatic synthesis of hyaluronic acid vinyl esters for two-photon microfabrication of biocompatible and biodegradable hydrogel constructs";
    Polymer Chemistry, 5 (2014), 22; 6523 - 6533.

    More information

  409. Authors: Xiaohua Qin, E163-02-1; Aleksandr Ovsianikov, E308-S; Jürgen Stampfl, E308-S; Robert Liska, E163-02-1

    X.H. Qin, A. Ovsianikov, J. Stampfl, R. Liska:
    "Additive manufacturing of photosensitive hydrogels for tissue engineering applications";
    BioNanoMaterials, 15 (2014), 3-4; 49 - 70.

    More information

  410. Authors: Xiaohua Qin, E163-02-1; Jan Torgersen, E308-S; Robert Saf, TU Graz; Severin Mühleder, Austrian Cluster ...; Niklas Ulrich Pucher, E163-02-1; Samuel Ligon, E163-02-1; Wolfgang Holnthoner, Austrian Cluster ...; Heinz Redl, Austrian Cluster ...; Aleksandr Ovsianikov, E308-S; Jürgen Stampfl, E308-S; Robert Liska, E163-02-1

    X.H. Qin, J. Torgersen, R. Saf, S. Mühleder, N.U Pucher, S. Ligon, W. Holnthoner, H. Redl, A. Ovsianikov, J. Stampfl, R. Liska:
    "Three-Dimensional Microfabrication of Protein Hydrogels via Two-Photon-Excited Thiol-Vinyl Ester Photopolymerization";
    Journal of Polymer Science Part A: Polymer Chemistry, 51 (2013), 4799 - 4810.

    More information

  411. Authors: Robert Raab, E308-GrMayrh; Christian Martin Koller, E308-GrMayrh; Szilard Koloszvári, Plansee; Jürgen Ramm; Paul Heinz Mayrhofer, E308-GrMayrh

    R. Raab, C.M. Koller, S. Koloszvári, J. Ramm, P.H. Mayrhofer:
    "Thermal stability of arc evaporated Al-Cr-O-N coatings";
    Surface & Coatings Technology, 356 (2018), 356; 64 - 71.

  412. Authors: Robert Raab, E308-GrMayrh; Christian Martin Koller, E308-GrMayrh; Szilárd Kolozsvári, Plansee; Jürgen Ramm; Paul Heinz Mayrhofer, E308-GrMayrh

    R. Raab, C.M. Koller, S. Kolozsvári, J. Ramm, P.H. Mayrhofer:
    "Thermal stability of arc evaporated Al-Cr-O and Al-Cr-O/ Al-Cr-N multilayer coatings";
    Surface & Coatings Technology, 352 (2018), 352; 213 - 221.

  413. Authors: N Radic; B Pivac; F Meinardi; Thomas Koch, E308-S

    N. Radic, B. Pivac, F. Meinardi, T. Koch:
    "Raman study of carbon clusters in W-D thin films";
    Materials Science and Engineering A, 396 (2005), 290 - 295.

  414. Authors: Rene Radis, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    R. Radis, E. Kozeschnik:
    "Concurrent Precipitation of AlN and VN in Microalloyed Steel";
    Steel Research International, 81 (2010), 8; 681 - 685.

    More information

  415. Authors: Rene Radis, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    R. Radis, E. Kozeschnik:
    "Kinetics of AlN Precipitation in Microalloyed Steel";
    Modelling and Simulation in Materials Science and Engineering, 18 (2010), 055003; 1 - 16.

    More information

  416. Authors: Rene Radis, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    R. Radis, E. Kozeschnik:
    "Numerical simulation of NbC precipitation in microalloyed steel";
    Modelling and Simulation in Materials Science and Engineering, 20 (2012), 055010 - 055024.

    More information

  417. Authors: Rene Radis, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    R. Radis, E. Kozeschnik:
    "Precipitation Kinetics of Aluminium Nitride in Austenite in Microalloyed HSLA Steels";
    Materials Science Forum, 636-637 (2010), 605 - 611.

    More information

  418. Authors: Rene Radis, E308-Gr Kozesch; Miroslava Schaffer; Mihaela Albu, TU Graz (FELMI); Gerhard Kothleitner, TU Graz (FELMI); Peter Pölt, TU Graz (FELMI); Ernst Kozeschnik, E308-Gr Kozesch

    R. Radis, M. Schaffer, M. Albu, G. Kothleitner, P. Pölt, E. Kozeschnik:
    "Multimodal size distributions of γ' precipitates during continuous cooling of UDIMET 720 Li";
    Acta Materialia, 57 (2009), 19; 5739 - 5747.

    More information

  419. Authors: Rene Radis, E308-Gr Kozesch; Christian Schlacher, IWS - TU Graz; Ernst Kozeschnik, E308-Gr Kozesch; Peter Mayr, TU Graz; Norbert Enzinger, IWS - TU Graz; Hartmuth Schröttner, IWS - TU Graz; Christof Sommitsch, IWS - TU Graz

    R. Radis, C. Schlacher, E. Kozeschnik, P. Mayr, N. Enzinger, H. Schröttner, C. Sommitsch:
    "Loss of Ductility Caused by AlN Precipitation in Hadfield Steel";
    Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 43A (2012), 1132 - 1139.

    More information

  420. Authors: Rene Radis, IWS TU Graz; Sabine Schwarz, E057B; Sabine Zamberger, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    R. Radis, S. Schwarz, S. Zamberger, E. Kozeschnik:
    "AlN Precipitation During Isothermal Annealing of Ultra Low Carbon Steel";
    Steel Research International, 82 (2011), 8; 905 - 910.

    More information

  421. Authors: Rene Radis, E308-Gr Kozesch; Gerald Zickler, CDL ESOP - MU Leoben; M Stockinger, BÖHLER GmbH; Christof Sommitsch, IWS - TU Graz; Ernst Kozeschnik, E308-Gr Kozesch

    R. Radis, G. Zickler, M. Stockinger, C. Sommitsch, E. Kozeschnik:
    "Interaction of the Precipitation Kinetics of Delta and Gamma' Phases in Nickel-Base Superalloy ATI Allvac 718 Plus";
    Materials Science Forum, 638-642 (2010), 2712 - 2717.

    More information

  422. Authors: Philip Radovanovic, E163-02-1; Michael Kellner, E163-02-1; Jovan Matovic, E366-MST; Robert Liska, E163-02-1; Thomas Koch, E308-S

    P. Radovanovic, M. Kellner, J. Matovic, R. Liska, T. Koch:
    "Asymmetric membranes with interpenetrating proton-conducting morphology made by a combination of immersion precipitation and photopolymerization";
    Journal of Membrane Science, 401-402 (2012), 254 - 261.

  423. Authors: S.K. Rajput, Indian Inst. Techno; Martina Dikovits, TU Graz; G.P. Chaudhari, Indian Inst. Techn.; Cecilia Poletti, TU Graz; Fernando Warchomicka, E308-D; S.K. Pancholi, Indian Inst. Techn.

    S. Rajput, M. Dikovits, G. Chaudhari, C. Poletti, F. Warchomicka, S. Pancholi:
    "Physical simulation of hot deformation and microstructural evolution of AISI 1016 steel using processing maps";
    Materials Science and Engineering A, 587 (2013), 291 - 300.

  424. Authors: Stephan Reisinger, MCL; Ernst Kozeschnik, E308-Gr Kozesch; Gerald Ressel, mcl Forschung GmbH; Jozef Keckes, MUL; Andreas Stark, Helmholtz Geesthacht; Stefan Marsoner, MUL; Reinhold Ebner, MCL

    S. Reisinger, E. Kozeschnik, G. Ressel, J. Keckes, A. Stark, S. Marsoner, R. Ebner:
    "Strain energy contributions on the bainitic phase transformation in a CrMoV steel during continuous cooling";
    Materials & Design, 155 (2018), 155; 475 - 484.

  425. Author: Guillermo Requena, E308-D

    G. Requena:
    "Sub-micrometer holotomography of multiphase metals";
    ESRF Highlights (invited), 1 (2010), -; 112 - 114.

    More information

  426. Authors: Guillermo Requena, E308-D; Bernd Bauer, E308-D; Hans-Peter Degischer, E308-D; Marcela Lieblich, CENIM Madrid

    G. Requena, B. Bauer, H.P. Degischer, M. Lieblich:
    "The effect of ball milling and wet blending on the creep behaviour of a particle reinforced 2124 Al-alloy";
    International Journal of Materials Research, 102 (2011), 8; 982 - 992.

    More information

  427. Authors: Guillermo Requena, E308-D; David Canelo Yubero, E308-D; Javier Corrochano

    G. Requena, D. Canelo Yubero, J. Corrochano:
    "Stress relaxation during thermal cycling of particle reinforced aluminium matrix composites";
    Composites Part A: Applied Science and Manufacturing, 43 (2012), 1981 - 1988.

  428. Authors: Guillermo Requena, E308-D; P Cloetens; Wolfgang Altendorfer, E308-D; Cecilia Poletti, E308-D; Domonkos Tolnai, E308-D; Fernando Warchomicka, E308-D; Hans-Peter Degischer, E308-D

    G. Requena, P. Cloetens, W. Altendorfer, C. Poletti, D. Tolnai, F. Warchomicka, H.P. Degischer:
    "Sub-micrometer synchrotron tomography of multiphase metals using Kirkpatrick-Baez optics";
    Scripta Materialia, 61 (2009), 7; 760 - 763.

    More information

  429. Authors: Guillermo Requena, E308-D; Hans-Peter Degischer, E308-D

    G. Requena, H.P. Degischer:
    "Creep behavior of unreinforced and short fibre reinforced AlSi12CuMgNi piston alloy";
    Materials Science and Engineering A, 420 (2006), 265 - 275.

    More information

  430. Authors: Guillermo Requena, E308-D; Hans-Peter Degischer, E308-D

    G. Requena, H.P. Degischer:
    "Effects of particle reinforcement on creep behaviour of AlSi1MgCu";
    Zeitschrift für Metallkunde, 96 (2005), 7; 805 - 811.

  431. Authors: Guillermo Requena, E308-D; Hans-Peter Degischer, E308-D

    G. Requena, H.P. Degischer:
    "Three-Dimensional Architecture of Engineering Multiphase Metals";
    Annual Review of Materials Research (invited), 42 (2012), 151 - 161.

  432. Authors: Guillermo Requena, E308-D; Hans-Peter Degischer, E308-D; Esteban D. Marks, E308-D; Elodie Boller

    G. Requena, H.P. Degischer, E. Marks, E. Boller:
    "Entwicklung der Konnektivität der Phasen in einer kurzfaserverstärkten Aluminium-Kolbenlegierung unter Kriechbelastung (Developing connectivity of the phases in a short fibre reinforced aluminium piston alloy subjected to creep)";
    Materialwissenschaft und Werkstofftechnik, 38 (2007), 11; 885 - 893.

    More information

  433. Authors: Guillermo Requena, E308-D; Hans-Peter Degischer, E308-D; Esteban D. Marks, E308-D; Elodie Boller

    G. Requena, H.P. Degischer, E. Marks, E. Boller:
    "Microtomographic study of the evolution of microstructure during creep of an AlSi12CuMgNi alloy reinforced with Al2O3 short fibres";
    Materials Science and Engineering A, 487 (2008), Issue 1-2; 99 - 107.

    More information

  434. Authors: Guillermo Requena, E308-D; Georg Fiedler, E308-D; Bernhard Seiser; Hans-Peter Degischer, E308-D; Marco di Michiel, ESRF; Thomas Buslaps

    G. Requena, G. Fiedler, B. Seiser, H.P. Degischer, M. di Michiel, T. Buslaps:
    "3D-Quantification of the distribution of continuous fibres in unidirectionally reinforced composites";
    Composites Part A: Applied Science and Manufacturing, 40 (2009), 2; 152 - 163.

    More information

  435. Authors: Guillermo Requena; Gerardo Garces, CENIM; Zahid Asghar, E308-D; Esteban D. Marks, E308-D; Peter Staron; Peter Cloetens, ESRF-Grenoble

    G. Requena, G. Garces, Z. Asghar, E. Marks, P. Staron, P. Cloetens:
    "The effect of the connectivity of rigid phases on strength of Al-Si alloys";
    Advanced Engineering Materials, 13 (2011), 8; 674 - 684.

    More information

  436. Authors: Guillermo Requena, E308-D; Gerardo Garces, CENIM; Stephan Danko; Thilo Pirling; Elodie Boller

    G. Requena, G. Garces, S. Danko, T. Pirling, E. Boller:
    "The effect of eutectic Si on the strength of short fibre reinforced Al";
    Acta Materialia, 57 (2009), 11; 3199 - 3210.

    More information

  437. Authors: Guillermo Requena, E308-D; Gerardo Garces, CENIM; Marcos Rodriguez; Thilo Pirling; P Cloetens

    G. Requena, G. Garces, M. Rodriguez, T. Pirling, P. Cloetens:
    "3D Architecture and load partition in eutectic Al-Si alloys";
    Advanced Engineering Materials, 11 (2009), 12; 1007 - 1014.

    More information

  438. Authors: Guillermo Requena, E308-D; Eric Maire; Claire Leguen; Sandrine Thuillier, Univ Bretagne-Sud

    G. Requena, E. Maire, C. Leguen, S. Thuillier:
    "Separation of nucleation and growth of voids during tensile deformation of a dual phase steel using synchrotron microtomography";
    Materials Science and Engineering A, 589 (2014), -; 242 - 251.

    More information

  439. Authors: Guillermo Requena, E308-D; Dietmar Telfser; C. Hörist; Hans-Peter Degischer, E308-D

    G. Requena, D. Telfser, C. Hörist, H.P. Degischer:
    "Creep behaviour of AA 6061 alloy and AA 6061 metal matrix composite";
    Materials Science and Technology, Vol. 18 (2002), 515 - 521.

  440. Authors: Rodrigo A. Rezende, CTI São Paulo; Frederico D. A. S. Pereira, CTI. São Paulo; Vladimir Kasyanov, Riga TU; Aleksandr Ovsianikov, E308-S; Jan Torgensen, E308-S; Peter Gruber, E308-S; Jürgen Stampfl, E308-S; Ken Brakke, Susquehanna Uni; Julia A. Nogueiraa, Centre for Infor ...; Vladimir Mironov, 3D Bioprinting S ...; Jorge V. L. da Silva, CTI, Sao Paulo

    R. Rezende, F. Pereira, V. Kasyanov, A. Ovsianikov, J. Torgensen, P. Gruber, J. Stampfl, K. Brakke, J. Nogueiraa, V. Mironov, J. da Silva:
    "Design, physical prototyping and initial characterisation of `lockyballs´";
    Virtual and Physical Prototyping, 7 (2012), 287 - 301.

  441. Authors: Helmut Riedl, E308-GrMayrh; Elias Aschauer, E308-GrMayrh; Christian Martin Koller, E308-GrMayrh; Peter Polcik, Plansee; Mirjam Arndt, Balzers; Paul Heinz Mayrhofer, E308-GrMayrh

    H. Riedl, E. Aschauer, C.M. Koller, P. Polcik, M. Arndt, P.H. Mayrhofer:
    "Ti-Al-N/Mo-Si-B multilayers: An architectural arrangement for high temperature oxidation resistant hard coatings";
    Surface & Coatings Technology, 328 (2017), 80 - 88.

    More information

  442. Authors: Helmut Riedl, E308-GrMayrh; Thomas Glechner, E308-GrMayrh; Tomasz Wojcik, E308-Gr Kozesch; Nikola Koutná, E308-GrMayrh; Szilárd Kolozsvári, Plansee; Valentina Paneta, Uppsala University; David Holec, MU Leoben; Daniel Primetzhofer, Department of Ph ...; Paul Heinz Mayrhofer, E308-GrMayrh

    H. Riedl, T. Glechner, T. Wojcik, N. Koutná, S. Kolozsvári, V. Paneta, D. Holec, D. Primetzhofer, P.H. Mayrhofer:
    "Influence of carbon deficiency on phase formation and thermal stability of super-hard TaCy thin films";
    Scripta Materialia, 149 (2018), 149; 150 - 154.

    More information

  443. Authors: Helmut Riedl, E308-GrMayrh; David Holec, E308-GrMayrh; Richard Rachbauer; Peter Polcik, Plansee; Robert Hollerweger, E308-GrMayrh; Jörg Ulrich Paulitsch, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh

    H. Riedl, D. Holec, R. Rachbauer, P. Polcik, R. Hollerweger, J. Paulitsch, P.H. Mayrhofer:
    "Phase stability, mechanical properties and thermal stability of Y alloyed Ti-Al-N coatings";
    Surface & Coatings Technology, 235 (2013), 0; 174 - 180.

    More information

  444. Authors: Helmut Riedl, E308-GrMayrh; Christian Martin Koller, E308-GrMayrh; Andreas Limbeck, E164-01-2; Jiri Kalas, Oerlikon Balzers ...; Peter Polcik, Plansee; Paul Heinz Mayrhofer, E308-GrMayrh

    H. Riedl, C.M. Koller, A. Limbeck, J Kalas, P. Polcik, P.H. Mayrhofer:
    "Oxidation behavior and tribological properties of multilayered Ti-Al-N/Mo-Si-B thin films";
    Journal of Vacuum Science & Technology A, 33 (2015), 5; 05E129-1 - 05E129-9.

    More information

  445. Authors: Helmut Riedl, E308-GrMayrh; Christian Martin Koller, E308-GrMayrh; F Munnik; Herbert Hutter, E164-01-2; Francisca Mendez Martin, Lehrstuhl für Me ...; Richard Rachbauer; Szilárd Kolozsvári, Plansee; Matthias Bartosik, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh

    H. Riedl, C.M. Koller, F. Munnik, H. Hutter, F. Mendez Martin, R. Rachbauer, S. Kolozsvári, M. Bartosik, P.H. Mayrhofer:
    "Influence of oxygen impurities on growth morphology, structure and mechanical properties of Ti-Al-N thin films";
    Thin Solid Films, 603 (2016), 39 - 49.

    More information

  446. Authors: Helmut Riedl, E308-GrMayrh; Annika Vieweg, E308-GrMayrh; Andreas Limbeck, E164-01-2; Jiri Kalas, Oerlikon Balzers ...; Mirjam Arndt, Balzers; Peter Polcik, Plansee; Holger Euchner, E308-GrMayrh; Matthias Bartosik, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh

    H. Riedl, A. Vieweg, A. Limbeck, J Kalas, M. Arndt, P. Polcik, H. Euchner, M. Bartosik, P.H. Mayrhofer:
    "Thermal stability and mechanical properties of boron enhanced Mo-Si coatings";
    Surface & Coatings Technology, 280 (2015), 282 - 290.

    More information

  447. Authors: Helmut Riedl, E308-GrMayrh; Jakob Zálesák, Erich Schmid Ins ...; Mirjam Arndt, Balzers; Peter Polcik, Plansee; David Holec, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh

    H. Riedl, J. Zálesák, M. Arndt, P. Polcik, D. Holec, P.H. Mayrhofer:
    "Ab initio studies on the adsorption and implantation of Al and Fe to nitride materials";
    Journal of Applied Physics, 118 (2015), 12; 125306-1 - 125306-8.

    More information

  448. Authors: Nils Ritter; Roman Sowa; J.C. Schauer; D. Gruber; Thomas Göhler; Ralph Rettig; Erwin Povoden-Karadeniz, E308-Gr Kozesch

    N. Ritter, R. Sowa, J. Schauer, D. Gruber, T. Göhler, R. Rettig, E. Povoden-Karadeniz et al.:
    "Effects of solid solution strengthening elements Mo, Re, Ru, and W on transition temperatures in nickel-based superalloys with high gamma´-volume fraction: comparison of experiment and calphad calculations";
    Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 49 (2018), 8; 3206 - 3216.

  449. Authors: Michael Rosenauer, E366-MNS; Emanuel Weber, E366-MNS; Jürgen Stampfl, E308-S; Michael J. Vellekoop, E366-MNS

    M. Rosenauer, E. Weber, J. Stampfl, M. Vellekoop:
    "Optofluidische Komponenten in der Flüssigkeitssensorik";
    TM - Technisches Messen, 77 (2010), 2; 89 - 94.

  450. Authors: M. Roy; Slimane Ghodbane; Thomas Koch, E308-S; A. Pauschitz; D. Steinmüller-Nethl; Agnieszka Tomala; Christian Tomastik; Friedrich Franek, E366-MST

    M. Roy, S Ghodbane, T. Koch, A. Pauschitz, D. Steinmüller-Nethl, A Tomala, C Tomastik, F. Franek:
    "Tribological investigation of nanocrystalline diamond films at low load under different tribosystems";
    Diamond and Related Materials, 20 (2011), 4; 573 - 583.

    More information

  451. Authors: M. Roy; Thomas Koch, E308-S; A. Pauschitz

    M. Roy, T. Koch, A. Pauschitz:
    "The influence of sputtering procedure on nanoindentation and nanoscratch behaviour of W-S-C film";
    Applied Surface Science, 256 (2010), 22; 6850 - 6858.

  452. Authors: Maish Roy; A. Pauschitz; Johannes Bernardi, E057B; Thomas Koch, E308-S; Friedrich Franek, E366-MST

    M. Roy, A. Pauschitz, J. Bernardi, T. Koch, F. Franek:
    "Microstructure and mechanical properties of HVOF sprayed nanocrystalline Cr3C2-25 (Ni20Cr) coating";
    Journal of Thermal Spray Technology, 15 (2006), 3; 372 - 381.

  453. Authors: Günter Russmüller, AKH Wien; Robert Liska, E163-02-1; Jürgen Stampfl, E308-S; Christian Heller, E163-02-1; Andreas Mautner, E163-02-1

    G. Russmüller, R. Liska, J. Stampfl, C. Heller, A. Mautner et al.:
    "3D Printable Biophotopolymers for in vivo Bone Regeneration";
    Materials, 8 (2015), 3685 - 3700.

    More information

  454. Authors: Jan Rybnicek, Czech Technical Univ; Ralf Lach, E308-S; Monika Lapcikova, Academy of Science; Josef Steidl, Czech Technical Univ; Zdenek Krulis, Academy of Science; Wolfgang Grellmann, M.-Luther-Universit.; Miroslav Slouf, Academy of Science

    J. Rybnicek, R. Lach, M. Lapcikova, J. Steidl, Z. Krulis, W. Grellmann, M. Slouf:
    "Increasing Recyclability of PC, ABS and PMMA: Morphology and Fracture Behavior of Binary and Ternary Blends";
    Journal of Applied Polymer Science, 109 (2008), 5; 3210 - 3223.

    More information

  455. Authors: Corinna Sabitzer, E308-GrMayrh; Jörg Ulrich Paulitsch, E308-GrMayrh; Szilárd Kolozsvári, Plansee; Richard Rachbauer; Paul Heinz Mayrhofer, E308-GrMayrh

    C. Sabitzer, J. Paulitsch, S. Kolozsvári, R. Rachbauer, P.H. Mayrhofer:
    "Influence of bias potential and layer arrangement on structure and mechanical properties of arc evaporated Al-Cr-N coatings";
    Vacuum, 106 (2014), 49 - 52.

  456. Authors: Corinna Sabitzer, E308-GrMayrh; Christian Steinkellner, E308-GrMayrh; Christian Martin Koller, E308-GrMayrh; Peter Polcik, Plansee; Richard Rachbauer; Paul Heinz Mayrhofer, E308-GrMayrh

    C. Sabitzer, C. Steinkellner, C.M. Koller, P. Polcik, R. Rachbauer, P.H. Mayrhofer:
    "Diffusion behavior of C, Cr, and Fe in arc evaporated TiN- and CrN-based coatings and their influence on thermal stability and hardness";
    Surface & Coatings Technology, 275 (2015), 275; 185 - 192.

    More information

  457. Authors: Muhammad Sajjad, E308-S; Bernhard Feichtenschlager, E165-02; Silvia Pabisch; Jakob Svehla, E165-02; Thomas Koch, E308-S; Sabine Seidler, E308-S; H. Peterlik; Guido Kickelbick, E165-02

    M Sajjad, B. Feichtenschlager, S Pabisch, J. Svehla, T. Koch, S. Seidler, H. Peterlik, G. Kickelbick:
    "Study of the effect of the concentration, size and surface chemistry of zirconia and silica nanoparticle fillers within an epoxy resin on the bulk properties of the resulting nanocomposites";
    Polymer International, 61 (2012), 2; 274 - 285.

  458. Authors: Shahroz Sakhawat, E308-D; Ahmad Falahati, E308-D; Maria Domankova

    S. Sakhawat, A. Falahati, M. Domankova:
    "Study of Microstructural Evolution of X4CrNiSiTi14-7 During Thermal Aging";
    Praktische Metallographie - Practical Metallography, 47 (2010), 9; 500 - 516.

    More information

  459. Authors: Dietmar Salaberger, E308-S; Michael Jerabek; Thomas Koch, E308-S; Johann Kastner, FH OÖ

    D. Salaberger, M Jerabek, T. Koch, J. Kastner:
    "Consideration of accuracy of quantitative X-ray CT analyses for short-glass-fibre-reinforced polymers";
    Materials Science Forum, 825 - 826 (2015), 907 - 913.

    More information

  460. Authors: Manfred Schlögl, E308-GrMayrh; Jozef Keckes, MUL; Christoph Kirchlechner; Jörg Ulrich Paulitsch, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh

    M. Schlögl, J. Keckes, C. Kirchlechner, J. Paulitsch, P.H. Mayrhofer:
    "Effects of structure and interfaces on fracture toughness of CrN/AlN multilayer coatings";
    Scripta Materialia, 68 (2013), 917 - 920.

  461. Authors: Manfred Schlögl, E308-GrMayrh; Bernhard Mayer; Jörg Ulrich Paulitsch, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh

    M. Schlögl, B. Mayer, J. Paulitsch, P.H. Mayrhofer:
    "Influence of CrN and AlN layer thicknesses on structure and mechanical properties of CrN/AlN superlattices";
    Thin Solid Films, 545 (2013), 375 - 379.

  462. Authors: Manfred Schlögl, E308-GrMayrh; Jörg Ulrich Paulitsch, E308-GrMayrh; Jozef Keckes, MUL; Paul Heinz Mayrhofer, E308-GrMayrh

    M. Schlögl, J. Paulitsch, J. Keckes, P.H. Mayrhofer:
    "Influence of AlN Layers on Mechanical Properties and Thermal Stability of Cr-Based Nitride Coatings";
    Thin Solid Films, 531 (2013), 113 - 118.

    More information

  463. Authors: Manfred Schlögl, E308-GrMayrh; Jörg Ulrich Paulitsch, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh

    M. Schlögl, J. Paulitsch, P.H. Mayrhofer:
    "Thermal stability of CrN/AlN superlattice coatings";
    Surface & Coatings Technology, 240 (2014), 250 - 254.

  464. Authors: Matthias Schmidtchen, TU Freiberg; Axel Rimnac; Piotr Warczok, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch; Christian Bernhard; Sergey Bragin; Rudolf Kawalla, TU Freiberg; Bernd Linzer

    M. Schmidtchen, A. Rimnac, P. Warczok, E. Kozeschnik, C. Bernhard, S. Bragin, R. Kawalla, B. Linzer:
    "Investigation of the influence of the chemical composition of HSLA steel grades on the microstructure homogeneity during hot rolling in continuous rolling mills using a fast layer model";
    IOP Conference Series: Materials Science and Engineering, 119 (2016), 012001; 8 pages.

    More information

  465. Authors: A Schnabl; Hans-Peter Degischer, E308-D

    A. Schnabl, H.P. Degischer:
    "Thermomechanical fatigue of short fibre reinforced aluminium matrix piston alloy";
    Materials Science and Technology, 19 (2003), 1115 - 1118.

  466. Authors: Andreas Schnabl, E308-D; Hans-Peter Degischer, E308-D

    A. Schnabl, H.P. Degischer:
    "Thermozyklisches Kriechen einer kurzfaserverstärkten Aluminium-Kolbenlegierung";
    Zeitschrift für Metallkunde, 94 (2003), 6; 743 - 748.

  467. Authors: Ronald Schnitzer, MU Leoben; Rene Radis, E308-Gr Kozesch; Matthias Nöhrer, CDLESOP - MU Leoben; Michael Schober, MU Leoben; Rainer Hochfellner, CDLEOP - MU Leoben; S Zinner; Erwin Povoden-Karadeniz, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch; Harald Leitner, Universität Leoben

    R. Schnitzer, R. Radis, M. Nöhrer, M. Schober, R. Hochfellner, S. Zinner, E. Povoden-Karadeniz, E. Kozeschnik, H. Leitner:
    "Reverted Austenite in PH 13-8 Mo Maraging Steels";
    Materials Chemistry and Physics, 122 (2010), 138 - 145.

    More information

  468. Authors: Ronald Schnitzer, MU Leoben; Dominik Zügner, E308-Gr Kozesch; Phillip Haslberger, MU Leoben; Wolfgang Ernst, voestalpine Stah ...; Ernst Kozeschnik, E308-Gr Kozesch

    R. Schnitzer, D. Zügner, P. Haslberger, W. Ernst, E. Kozeschnik:
    "Influence of alloying elements on the mechanical properties of high-strength weld metal";
    Science and Technology of Welding and Joining, Volume 22 (2017), 6; 536 - 543.

    More information

  469. Authors: Christoph Schoberleitner, E308-S; V.-M. Archodoulaki, E308-S; Thomas Koch, E308-S; Sigrid Lüftl, E308-S; Luis A. Mateos, E376; Markus Vincze, E376; Markus Werderitsch, MA 31; Gerhard Kuschnig, MA 31

    C. Schoberleitner, V. Archodoulaki, T. Koch, S. Lüftl, L. Mateos, M. Vincze, M. Werderitsch, G. Kuschnig:
    "Development of a sealing material and robot for automatic socket rehabilitation of grey cast iron pipes in drinking water supply systems";
    Water Science & Technology: Water Supply, 4 (2013), 924 - 931.

    More information

  470. Authors: Christoph Schoberleitner, E308-S; V.-M. Archodoulaki, E308-S; Thomas Koch, E308-S; Sigrid Lüftl, E308-S; Markus Werderitsch, MA 31; Gerhard Kuschnig, MA 31

    C. Schoberleitner, V. Archodoulaki, T. Koch, S. Lüftl, M. Werderitsch, G. Kuschnig:
    "Developing a Sealing Material: Effect of Epoxy Modification on Specific Physical and Mechanical Properties";
    Materials, 6 (2013), 12; 5490 - 5501.

    More information

  471. Authors: Michael Schöbel, E308-D; Wolfgang Altendorfer, E308-D; Hans-Peter Degischer, E308-D; Sebastien Vaucher, EMPA-Thun; Thomas Buslaps, ESRF; Marco Di Michiel, ESRF-Grenoble; Michael Hofmann, FRM2

    M. Schöbel, W. Altendorfer, H.P. Degischer, S. Vaucher, T. Buslaps, M. Di Michiel, M. Hofmann:
    "Internal stresses and voids in SiC particle reinforced aluminium composites for heat sink applications";
    Composites Science and Technology, 71 (2011), 5; 724 - 733.

  472. Authors: Michael Schöbel, E308-D; Hans-Peter Degischer, E308-D; Annegret Brendel, IPP-Garching; Bernhard Harrer, FH OÖ F&E GmbH; Marco Di Michiel, ESRF-Grenoble

    M. Schöbel, H.P. Degischer, A. Brendel, B. Harrer, M. Di Michiel:
    "3D Characterization of Thermal Fatigue Damage in Monofilament Reinforced Copper for Heat Sink Applications in Fusion Reactor Systems";
    Praktische Metallographie - Practical Metallography, 49 (2012), 278 - 289.

  473. Authors: Michael Schöbel, E308-D; Hans-Peter Degischer, E308-D; Sebastien Vaucher, EMPA-Thun; Michael Hofmann, FRM2; Peter Cloetens, ESRF-Grenoble

    M. Schöbel, H.P. Degischer, S. Vaucher, M. Hofmann, P. Cloetens:
    "Reinforcement architectures and thermal fatigue in diamond particle reinforced aluminum";
    Acta Materialia, 58 (2010), 6421 - 6430.

    More information

  474. Authors: Michael Schöbel, E308-D; Simon Großeiber, E308-Requena; Johannes Jonke, E308-D; Robert Wimpory, HZB Wannsee; Sergiu Ilie, voestalpine AG; Guillermo Requena, E308-D

    M. Schöbel, S. Großeiber, J. Jonke, R. Wimpory, S. Ilie, G. Requena:
    "Residual Stresses in Continuously Cast Steel Slabs";
    Berg- und Hüttenmännische Monatshefte (BHM), 158 (2013), 11; 475 - 476.

    More information

  475. Authors: Michael Schöbel, E308-D; Johannes Jonke, E308-D; Hans-Peter Degischer, E308-D; Aurelia Herrmann, IPP Garching; Robert Wimpory, HZB Wannsee; Thomas Buslaps, ESRF

    M. Schöbel, J. Jonke, H.P. Degischer, A. Herrmann, R. Wimpory, T. Buslaps:
    "Thermal cycling stresses in W-monofilament reinforced copper";
    Advanced Engineering Materials, 13 (2011), 8; 742 - 746.

  476. Authors: Michael Schöbel, E308-D; Johannes Jonke, E308-D; Hans-Peter Degischer, E308-D; Verena Paffenholz, IPP Garching; Robert Wimpory, HZB Wannsee; Marco Di Michiel, ESRF-Grenoble

    M. Schöbel, J. Jonke, H.P. Degischer, V. Paffenholz, R. Wimpory, M. Di Michiel:
    "Thermal fatigue damage in monofilament reinforced copper for heat sink applications in divertor elements";
    Journal of Nuclear Materials, 409 (2011), 3; 225 - 234.

  477. Authors: Michael Schöbel, E308-D; Peter Pongratz, E138; Hans-Peter Degischer, E308-D

    M. Schöbel, P. Pongratz, H.P. Degischer:
    "Coherency loss of Al3(Sc,Zr) precipitates by deformation of an Al-Zn-Mg alloy";
    Acta Materialia, 60 (2012), 10; 4247 - 4254.

  478. Authors: Michael Schöbel, E308-D; Guillermo Requena, E308-D; Hans-Peter Degischer, E308-D; Heinz Kaminski, E308-P; Thomas Buslaps; Marco Di Michiel

    M. Schöbel, G. Requena, H.P. Degischer, H. Kaminski, T. Buslaps, M. Di Michiel:
    "Residual stresses and void kinetics in AlSiC MMCs during thermal cycling";
    Materials Science Forum, 571-572 (2008), 413 - 418.

    More information

  479. Authors: Michael Schöbel, E308-D; Guillermo Requena, E308-D; Hans-Peter Degischer, E308-D; Heinz Kaminski, E308-P; Thomas Buslaps; Marco Di Michiel

    M. Schöbel, G. Requena, H.P. Degischer, H. Kaminski, T. Buslaps, M. Di Michiel:
    "Thermische Ausdehnung, innere Spannungen und Porenverteilung in AlSiCp Metallmatrixverbundwerkstoffe (Thermal expansion, internal stresses and porosity distribution in AlSiCp MMC)";
    Materialwissenschaft und Werkstofftechnik, 38 (2007), 11; 927 - 933.

    More information

  480. Authors: Daniel Schopf; Holger Euchner, E308-GrMayrh; Hans-Rainer Trebin

    D. Schopf, H. Euchner, H. Trebin:
    "Effective potentials for simulations of the thermal conductivity of type-I semiconductor clathrate systems";
    Physical Review B, 89 (2014), 214306; 21 - 21430611.

    More information

  481. Authors: Monika Schuster, E163-02-1; Robert Inführ, E163-02-1; Claudia Turecek, Osteology; Jürgen Stampfl, E308-S; Anita Varga; Robert Liska, E163-02-1

    M. Schuster, R. Inführ, C. Turecek, J. Stampfl, A. Varga, R. Liska:
    "Photopolymers for Rapid Prototyping of Soluble Mold Materials and Molding of Cellular Biomaterials";
    Monatshefte für Chemie, 137 (2006), 843 - 853.

  482. Authors: Monika Schuster, E163-02-1; Claudia Turecek, Osteology; Bertrand Kaiser, E308-S; Jürgen Stampfl, E308-S; Robert Liska, E163-02-1; Franz Varga, Osteology

    M. Schuster, C. Turecek, B. Kaiser, J. Stampfl, R. Liska, F. Varga:
    "Evaluation of Biocompatible Photopolymers I: Photoreactivity and Mechanical Properties of Reactive Diluents";
    Journal of Macromolecular Science Part A - Pure and Applied Chemistry, 44 (2007), 5; 547 - 557.

    More information

  483. Authors: Monika Schuster, E163-02-1; Claudia Turecek, Osteology; Alexander Mateos, E163-02-1; Jürgen Stampfl, E308-S; Robert Liska, E163-02-1; Franz Varga, Osteology

    M. Schuster, C. Turecek, A. Mateos, J. Stampfl, R. Liska, F. Varga:
    "Evaluation of Biocompatible Photopolymers II: Further Reactive Diluents";
    Monatshefte für Chemie, 138 (2007), 4; 261 - 268.

    More information

  484. Authors: Monika Schuster, E163-02-1; Claudia Turecek, Osteology; Franz Varga, Osteology; Helga C. Lichtenegger, E308-S; Jürgen Stampfl, E308-S; Robert Liska, E163-02-1

    M. Schuster, C. Turecek, F. Varga, H. Lichtenegger, J. Stampfl, R. Liska:
    "3D-shaping of biodegradable photopolymers for hard tissue replacement";
    Applied Surface Science, 254 (2007), 1131 - 1134.

    More information

  485. Authors: Monika Schuster, E163-02-1; Claudia Turecek, L. Boltzmann Inst.; Günther Weigel, Meduni Wien; Robert Saf, TU Graz; Jürgen Stampfl, E308-S; Franz Varga, LBIO; Robert Liska, E163-02-1

    M. Schuster, C. Turecek, G. Weigel, R. Saf, J. Stampfl, F. Varga, R. Liska:
    "Gelatin-Based Photopolymers for Bone Replacement Materials";
    Journal of Polymer Science Part A: Polymer Chemistry, 47 (2009), 7078 - 7089.

    More information

  486. Authors: Sandra Seichter, E308-S; V.-M. Archodoulaki, E308-S; Thomas Koch, E308-S; Wolfgang Fidi, Semperit; Armin Holzner, Semperit; Stefan Robin, Semperit

    S. Seichter, V. Archodoulaki, T. Koch, W. Fidi, A. Holzner, S. Robin:
    "Survey of the crack growth approach for the fatigue life estimation of application-relevant rubbers";
    AIP Conference Proceedings - American Institute of Physics, 1779 (2016), 1; 5 pages.

    More information

  487. Authors: Sandra Seichter, E308-S; V.-M. Archodoulaki, E308-S; Thomas Koch, E308-S; Armin Holzner, Semperit; Alfred Wondracek, Semperit

    S. Seichter, V. Archodoulaki, T. Koch, A. Holzner, A. Wondracek:
    "Ermüdungsverhalten technischer Gummimischungen - Der Einfluss verschiedener Parameter am Beispiel eines anwendungsrelevanten Belastungsfalls";
    GAK - Gummi Fasern Kunststoffe, 70 (2017), 4; 234 - 239.

    More information

  488. Authors: Sandra Seichter, E308-S; V.-M. Archodoulaki, E308-S; Thomas Koch, E308-S; Armin Holzner, Semperit; Alfred Wondracek, Semperit

    S. Seichter, V. Archodoulaki, T. Koch, A. Holzner, A. Wondracek:
    "Investigation of different influences on the fatigue behaviour of industrial rubbers";
    Polymer Testing, 59 (2017), 99 - 106.

    More information

  489. Authors: Wolfgang Seidl, E308-GrMayrh; Matthias Bartosik, E308-GrMayrh; Szilárd Kolozsvári, Plansee; Hamid Bolvardi, Oerlikon Balzers; Paul Heinz Mayrhofer, E308-GrMayrh

    W. Seidl, M. Bartosik, S. Kolozsvári, H. Bolvardi, P.H. Mayrhofer:
    "Improved mechanical properties, thermal stabilities, and oxidation resistance of arc evaporated Ti-Al-N coatings through alloying with Ta";
    Surface & Coatings Technology, 344 (2018), 244 - 249.

  490. Authors: Wolfgang Seidl, E308-GrMayrh; Matthias Bartosik, E308-GrMayrh; Szilárd Kolozsvári, Plansee; Hamid Bolvardi, Oerlikon Balzers; Paul Heinz Mayrhofer, E308-GrMayrh

    W. Seidl, M. Bartosik, S. Kolozsvári, H. Bolvardi, P.H. Mayrhofer:
    "Influence of coating thickness and substrate on stresses and mechanical properties of (Ti,Al,Ta)N/(Al,Cr)N multilayers";
    Surface & Coatings Technology, 347 (2018), 2018; 92 - 98.

  491. Authors: Wolfgang Seidl, E308-GrMayrh; Matthias Bartosik, E308-GrMayrh; Szilárd Kolozsvári, Plansee; Hamid Bolvardi, Oerlikon Balzers; Paul Heinz Mayrhofer, E308-GrMayrh

    W. Seidl, M. Bartosik, S. Kolozsvári, H. Bolvardi, P.H. Mayrhofer:
    "Influence of Ta on the fracture toughness of arc evaporated Ti-Al-N";
    Vacuum, 150 (2018), 24 - 28.

  492. Authors: Wolfgang Seidl, E308-GrMayrh; Matthias Bartosik, E308-GrMayrh; Szilárd Kolozsvári, Plansee; Hamid Bolvardi, Oerlikon Balzers; Paul Heinz Mayrhofer, E308-GrMayrh

    W. Seidl, M. Bartosik, S. Kolozsvári, H. Bolvardi, P.H. Mayrhofer:
    "Mechanical properties and oxidation resistance of Al-Cr-N/Ti-Al-Ta-N multilayer coatings";
    Surface & Coatings Technology, 347 (2018), 427 - 433.

  493. Authors: Konstanze Seidler, E163-02-1; Katharina Ehrmann, E163-02-1; Patrick Steinbauer, E163-02-1; Andreas Rohatschek, E317-02-1; Orestis G. Andriotis, E317-02-1; Claudia Dworak, E163-02-1; Thomas Koch, E308-S; Helga Bergmeister, MedUni Wien; Christian Grasl, MedUni Wien; Heinrich Schima, MedUni Wien; Philipp J. Thurner, E317-02-1; Robert Liska, E163-02-1; Stefan Baudis, E163-02-1

    K. Seidler, K. Ehrmann, P. Steinbauer, A. Rohatschek, O.G. Andriotis, C. Dworak, T. Koch, H. Bergmeister, C. Grasl, H. Schima, P.J. Thurner, R. Liska, S. Baudis:
    "A structural reconsideration: Linear aliphatic or alicyclic hard segments for biodegradable thermoplastic polyurethanes?";
    Journal of Polymer Science Part A: Polymer Chemistry, 56 (2018), 19; 2214 - 2224.

    More information

  494. Authors: Konstanze Seidler, E163-02-1; Markus Griesser, TU-Graz; Markus Kury, E163-02-1; Harikrishna Reghunathan, E163-02-1; Peter Dorfinger, E308-S; Thomas Koch, E308-S; Anastasiya Svirkova, E164-01-1; Martina Marchetti-Deschmann, E164-01-1; Jürgen Stampfl, E308-S; Norbert Moszner, Ivoclar Vivadent; Christian Gorsche, E163-02-1; Robert Liska, E163-02-1

    K. Seidler, M. Griesser, M. Kury, H. Reghunathan, P. Dorfinger, T. Koch, A. Svirkova, M. Marchetti-Deschmann, J. Stampfl, N. Moszner, C. Gorsche, R. Liska:
    "Vinyl Sulfonate Esters: Efficient Chain Transfer Agents for the 3D Printing of Tough Photopolymers without Retardation";
    Angewandte Chemie - International Edition, 57 (2018), 29; 9165 - 9169.

    More information

  495. Authors: Sabine Seidler, E308-S; Thomas Koch, E308-S

    S. Seidler, T. Koch:
    "Determination of Local Mechanical Properties of α-and β-PP by means of Microhardness Measurements";
    Journal of Macromolecular Science, Part B - Physics (2002), Vol. B41, Nos. 4-6; 851 - 861.

  496. Authors: Sabine Seidler, E308-S; Thomas Koch, E308-S

    S. Seidler, T. Koch:
    "Morphology - Property Correlations of PP materials by Means of Microhardness";
    Macromolecular Symposia, 217 (2004), 329 - 342.

  497. Authors: Markus Seitzberger, E317-01; Franz G. Rammerstorfer, E317-01; Hans-Peter Degischer, E308-D; Rudolf Gradinger

    M. Seitzberger, F. G. Rammerstorfer, H.P. Degischer, R. Gradinger:
    "Crushing of Axially Compressed Steel Tubes Filled with Aluminium Foam";
    Acta Mechanica, 125 (1997), 1-4; 93 - 105.

    More information

  498. Authors: Markus Seitzberger, E317-01; Franz G. Rammerstorfer, E317-01; Rudolf Gradinger; Hans-Peter Degischer, E308-D; M Blaimschein; C Walch

    M. Seitzberger, F. G. Rammerstorfer, R. Gradinger, H.P. Degischer, M. Blaimschein, C. Walch:
    "Experimental Studies on the Quasi-Static Axial Crushing of Steel Columns Filled with Aluminium Foam";
    International Journal of Solids and Structures, 37 (2000), 30; 4125 - 4147.

    More information

  499. Authors: D. Shakhvorostov; H. Pinto, E308-P; Anke Pyzalla, E308-P; S. Enders; K. Pöhlmann; M. Scherge

    D. Shakhvorostov, H. Pinto, A. Pyzalla, S. Enders, K. Pöhlmann, M. Scherge:
    "Mechanical properties of tribologically modified nano-layers";
    TriboTest, 11 (2004), 95 - 102.

  500. Authors: D. Shakhvorostov; H. Pinto, E308-P; Anke Pyzalla, E308-P; S. Enders; K. Pöhlmann; M. Scherge

    D. Shakhvorostov, H. Pinto, A. Pyzalla, S. Enders, K. Pöhlmann, M. Scherge:
    "Mechanical properties of tribologically modified nano-layers";
    TriboTest, Vol. 11 (2006), Issue 2; 95 - 102.

  501. Authors: D. Shakhvorostov; H. Pinto, E308-P; Anke Pyzalla, E308-P; S. Enders; K. Pöhlmann; M. Scherge

    D. Shakhvorostov, H. Pinto, A. Pyzalla, S. Enders, K. Pöhlmann, M. Scherge:
    "Structure, hardness and stress state analysis on metal-metal tribocontacts with oil lubrication";
    Materialwissenschaft und Werkstofftechnik, 35 (2004), 10/11; 614 - 619.

  502. Authors: Yao Shan, E308-Gr Kozesch; Jiri Svoboda, Academy of Scien ...; Franz Dieter Fischer, MU Leoben; Ernst Kozeschnik, E308-Gr Kozesch

    Y.V. Shan, J. Svoboda, F.D. Fischer, E. Kozeschnik:
    "Determination of Substitutional-Interstitial Interaction from Chemical";
    Advanced Materials Research, Vol 922 (2014), 922; 645 - 650.

    More information

  503. Authors: Liyang Shi, Uppsala University; Hauke Carstensen, Uppsala University; Katja Hölzl, E308-S; Markus Lunzer, E163-03-2; Li Hao, Uppsala University; Jöns Hilborn, Uppsala University; Aleksandr Ovsianikov, E308-S; Dimitri Ossipov, Uppsala University

    L. Shi, H. Carstensen, K. Hölzl, M. Lunzer, L. Hao, J. Hilborn, A. Ovsianikov, D. Ossipov:
    "Dynamic Coordination Chemistry Enables Free Directional Printing of Biopolymer Hydrogel";
    Chemistry of Materials, 29 (2017), 14; 5816 - 5823.

    More information

  504. Authors: Jae Hyeok Shim; Ernst Kozeschnik, E308-Gr Kozesch; Woo-Sang Jung; Seong-Cheol Lee; Dong-Ik Kim; Jin-Yoo Suh; Young-Su Lee; Young Whan Cho

    J. Shim, E. Kozeschnik, W. Jung, S. Lee, D. Kim, J. Suh, Y. Lee, Y. Cho:
    "Numerical simulation of long-term precipitate evolution in austenitic heat-resistant steels";
    CALPHAD - Computer Coupling of Phase Diagrams and Thermochemistry, 34 (2010), 105 - 112.

  505. Authors: Jae-Hyeok Shim; Erwin Povoden-Karadeniz, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch; Brian Wirth

    J. Shim, E. Povoden-Karadeniz, E. Kozeschnik, B. Wirth:
    "Modeling precipitation thermodynamics and kinetics in type 316 austenitic stainless steels with varying composition as an initial step toward predicting phase stability during irradiation";
    Journal of Nuclear Materials, 462 (2015), 250 - 257.

    More information

  506. Authors: Karina R. Silva, FU of Rio de Janeiro; Rodrigo A. Rezende, CTI São Paulo; Frederico D. A. S. Pereira, CTI. São Paulo; Peter Gruber, E308; Mellannie P. Stuart, NIM; Aleksandr Ovsianikov, E308; Ken Brakke, Susquehanna Uni; Vladimir Kasyanov, Riga TU; Jorge V. L. da Silva, CTI, Sao Paulo; José M. Granjeiro, FFU, Rio de Janeiro; Leandra S. Baptista, FU, Rio de Janeiro; Vladimir Mironov, 3D Bioprinting S ...

    K. Silva, R. Rezende, F. Pereira, P. Gruber, M. Stuart, A. Ovsianikov, K. Brakke, V. Kasyanov, J. da Silva, J. Granjeiro, L. Baptista, V. Mironov:
    "Delivery of Human Adipose Stem Cells Spheroids into Lockyballs";
    PLoS ONE, 11 (2016).

    More information

  507. Authors: Walter Smetana, E366-AEM; Bruno Balluch, E366-AEM; Günther Stangl, E366-MNS; Sigrid Lüftl, E308-S; Sabine Seidler, E308-S

    W. Smetana, B. Balluch, G. Stangl, S. Lüftl, S. Seidler:
    "Processing procedures for the realization of fine structured channel arrays and bridging elements by LTCC-Technology";
    Microelectronics Reliability, 49 (2009), 6; 592 - 599.

    More information

  508. Authors: Bernhard Sonderegger, TU Graz; Ivan Holzer, TU Graz; Ernst Kozeschnik, E308-Gr Kozesch

    B. Sonderegger, I. Holzer, E. Kozeschnik:
    "Calculation of energies of coherent interfaces and application to the nucleation, growth and coarsening of precipitates";
    Materials Science Forum, 638-642 (2010), 2730 - 2735.

  509. Authors: Bernhard Sonderegger, TU Graz; Ivan Holzer, TU Graz; Ernst Kozeschnik, E308-Gr Kozesch; Christof Sommitsch, IWS - TU Graz

    B. Sonderegger, I. Holzer, E. Kozeschnik, C. Sommitsch:
    "Particle distance distributions and their effect on precipitation strengthening";
    Computer Methods in Materials Science, 11 (2011), 1; 148 - 153.

    More information

  510. Authors: Bernhard Sonderegger, TU Graz; Ernst Kozeschnik, E308-Gr Kozesch

    B. Sonderegger, E. Kozeschnik:
    "Generalized nearest-neighbor broken-bond analysis of randomly oriented interfaces in multi-component fcc and bcc structures";
    Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 40 (2009), 3; 499 - 510.

    More information

  511. Authors: Bernhard Sonderegger, TU Graz; Ernst Kozeschnik, E308-Gr Kozesch

    B. Sonderegger, E. Kozeschnik:
    "Interfacial energy of diffuse phase boundaries in the generalized broken-bond approach";
    Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 41 (2010), 3262 - 3269.

  512. Authors: Bernhard Sonderegger, TU Graz; Ernst Kozeschnik, E308-Gr Kozesch

    B. Sonderegger, E. Kozeschnik:
    "Particle strengthening in fcc crystals with prolate and oblate precipitates";
    Scripta Materialia, 66 (2012), 52 - 55.

    More information

  513. Authors: Bernhard Sonderegger, TU Graz; Ernst Kozeschnik, E308-Gr Kozesch

    B. Sonderegger, E. Kozeschnik:
    "Size dependence of the interfacial energy in the generalized nearest-neighbor broken-bond approach";
    Scripta Materialia, 60 (2009), 6; 635 - 638.

    More information

  514. Authors: Bernhard Sonderegger, TU Graz; Ernst Kozeschnik, E308-Gr Kozesch; Harald Leitner, Universität Leoben; Helmut Clemens, Universität Leoben; Jiri Svoboda, Academy of Scien ...; Franz Dieter Fischer, Universität Leoben

    B. Sonderegger, E. Kozeschnik, H. Leitner, H. Clemens, J. Svoboda, F. Fischer:
    "Computational analysis of the precipitation kinetics in a complex tool steel";
    International Journal of Materials Research, 99 (2008), 4; 410 - 415.

  515. Authors: Bernhard Sonderegger, TU Graz; Ernst Kozeschnik, E308-Gr Kozesch; Harald Leitner, Universität Leoben; Helmut Clemens, Universität Leoben; Jiri Svoboda, Academy of Scien ...; Franz Dieter Fischer, Universität Leoben; Peter Staron

    B. Sonderegger, E. Kozeschnik, H. Leitner, H. Clemens, J. Svoboda, F. Fischer, P. Staron:
    "Kinetics of Precipitation in a Complex Hot-Work Tool Steel";
    Steel Research International, 81 (2010), 64 - 73.

  516. Authors: Franziska Stadlbauer, E308-S; Thomas Koch, E308-S; V.-M. Archodoulaki, E308-S; Florian Planitzer, Semperit; Wolfgang Fidi, Semperit; Armin Holzner, Semperit

    F. Stadlbauer, T. Koch, V. Archodoulaki, F. Planitzer, W. Fidi, A. Holzner:
    "Influence of Experimental Parameters on Fatigue Crack Growth and Heat Build-Up in Rubber";
    Materials, 6 (2013), 12; 5502 - 5516.

    More information

  517. Authors: Franziska Stadlbauer, E308-S; Thomas Koch, E308-S; Florian Planitzer, Semperit; Wolfgang Fidi, Semperit; V.-M. Archodoulaki, E308-S

    F. Stadlbauer, T. Koch, F. Planitzer, W. Fidi, V. Archodoulaki:
    "Einfluss des Rußfüllgrades von Elastomeren auf Aspekte der Ermüdung in Zug-Druck-Belastung";
    Kgk-Kautschuk Gummi Kunststoffe, 66 (2013), 7-8; 37 - 42.

    More information

  518. Authors: Franziska Stadlbauer, E308-S; Thomas Koch, E308-S; Florian Planitzer, Semperit; Wolfgang Fidi, Semperit; V.-M. Archodoulaki, E308-S

    F. Stadlbauer, T. Koch, F. Planitzer, W. Fidi, V. Archodoulaki:
    "Setup for evaluation of fatigue crack growth in rubber: Pure shear sample geometries tested in tension-compression mode";
    Polymer Testing, 32 (2013), 6; 1045 - 1051.

    More information

  519. Authors: Jürgen Stampfl, E308-S; Stefan Baudis, E163-02-1; Christian Heller, E308-S; Robert Liska, E163-02-1; Andre Neumeister, LZH; Rainer Kling, LZH; Andreas Ostendorf, LZH; Manfred Spitzbart, E308-S

    J. Stampfl, S. Baudis, C. Heller, R. Liska, A. Neumeister, R. Kling, A. Ostendorf, M. Spitzbart:
    "Photopolymers with tunable mechanical properties processed by laser based high-resolution stereolithography";
    Journal of Micromechanics and Microengineering, 18 (2008), 125014.

    More information

  520. Authors: Jürgen Stampfl, E308-S; Hassan Fouad, E308-S; Sabine Seidler, E308-S; Robert Liska, E163-02-1; Florian Schwager, E163-02-1; Alexander Woesz; Peter Fratzl

    J. Stampfl, H. Fouad, S. Seidler, R. Liska, F. Schwager, A. Woesz, P. Fratzl:
    "Fabrication and moulding of cellular materials by rapid prototyping";
    International Journal of Materials and Product Technology, 21 (2004), 4; 285 - 296.

    More information

  521. Authors: Jürgen Stampfl, E308-S; Robert Liska, E163-02-1

    J. Stampfl, R. Liska:
    "New materials for rapid prototyping applications";
    Macromolecular Chemistry and Physics, 206 (2005), 1253 - 1256.

    More information

  522. Authors: Jürgen Stampfl, E308-S; Hao-Chih Liu; Seo Woo Nam; K. Sakamoto; H. Tsuru; S. Kang; Alexander G. Cooper; A. Nickel; Fritz B. Prinz

    J. Stampfl, H. Liu, S. Nam, K. Sakamoto, H. Tsuru, S. Kang, A. Cooper, A. Nickel, F. Prinz:
    "Rapid prototyping and manufacturing by gelcasting of metallic and ceramic slurries";
    Materials Science and Engineering A, 334 (2002), 187 - 192.

  523. Authors: Jürgen Stampfl, E308-S; Mathias Luxner, E317-01; Heinz E. Pettermann, E317-01

    J. Stampfl, M.H. Luxner, H. E. Pettermann:
    "Zellulare Werkstoffe mit frei wählbarer Zellgeometrie - Herstellung, Modellierung der mechanischen Eigenschaften und Anwendungen";
    Lignovisionen, 14 (2006), 55 - 60.

  524. Authors: Jürgen Stampfl, E308-S; A. Wöß; O. Kolednik; Peter Fratzl

    J. Stampfl, A. Wöß, O. Kolednik, P. Fratzl:
    "Object reconstruction and object construction: Applications in materials science";
    Recent Research Development in Applied Physics, 5 (2002), 89 - 106.

  525. Authors: Jürgen Stampfl, E308-S; A. Wöß; Sabine Seidler, E308-S; Hassan Fouad, E308-S; Arthit Pisaipan, E308-S; Florian Schwager, E163-02-1; Robert Liska, E163-02-1

    J. Stampfl, A. Wöß, S. Seidler, H. Fouad, A. Pisaipan, F. Schwager, R. Liska:
    "Water Soluble, Photocurable Resins for Rapid Prototyping Applications";
    Macromolecular Symposia, 217 (2004), 1; 99 - 107.

  526. Authors: Georg Stechauner, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    G. Stechauner, E. Kozeschnik:
    "Assessment of substitutional self-diffusion along short-circuit paths in Al, Fe and Ni";
    CALPHAD - Computer Coupling of Phase Diagrams and Thermochemistry, 47 (2014), 92 - 99.

    More information

  527. Authors: Georg Stechauner, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    G. Stechauner, E. Kozeschnik:
    "Self-Diffusion in Grain Boundaries and Dislocation Pipes in Al, Fe, and Ni and Application to AlN Precipitation in Steel";
    Journal of Materials Engineering and Performance, 23 (2014), 5; 1576 - 1579.

    More information

  528. Authors: Georg Stechauner, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    G. Stechauner, E. Kozeschnik:
    "Thermo-kinetic modeling of Cu precipitation in α-Fe";
    Acta Materialia, 100 (2015), 135 - 146.

    More information

  529. Authors: Georg Stechauner, MCL; Sophie Primig, MUL; Ernst Kozeschnik, E308-Gr Kozesch

    G. Stechauner, S. Primig, E. Kozeschnik:
    "Early Stages of Cu Precipitation in 15-5 PH Maraging Steel Revisited - Part II: Thermokinetic Simulation";
    Steel Research International, 88 (2017), 1, 1600085.

  530. Authors: Johannes Steindl, E163-02-1; Thomas Koch, E308-S; Norbert Moszner, Ivoclar; Christian Gorsche, E163-02-1

    J. Steindl, T. Koch, N. Moszner, C. Gorsche:
    "Silane-Acrylate Chemistry for Regulating Network Formation in Radical Photopolymerization";
    Macromolecules, 50 (2017), 19; 7448 - 7457.

    More information

  531. Author: Bernhard Steyrer, E308-S

    B. Steyrer:
    "PLA/PHA Blend for 3D printing";
    Bioplastics Magazine, 9 (2014), 22.

  532. Authors: Bernhard Steyrer, E308-S; Bernhard Busetti, E308-S; György Harakaly, E163-02-1; Robert Liska, E163-02-1; Jürgen Stampfl, E308-S

    B. Steyrer, B. Busetti, G. Harakaly, R. Liska, J. Stampfl:
    "Hot Lithography vs. room temperature DLP 3D-printing of a dimethacrylate";
    Additive Manufacturing, 21 (2018), 209 - 214.

    More information

  533. Authors: Bernhard Steyrer, E308-S; Philipp Neubauer, E308-S; Robert Liska, E163-02-1; Jürgen Stampfl, E308-S

    B. Steyrer, P. Neubauer, R. Liska, J. Stampfl:
    "Visible Light Photoinitiator for 3D-Printing of Tough Methacrylate Resins";
    Materials, 10 (2017), 12; 11 pages.

    More information

  534. Authors: Miles Alexander Stopher, Cambridge University; Peter Lang, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch; Pedro E.J. Rivera-Diaz-Del-Castillo, Cambridge University

    M. Stopher, P. Lang, E. Kozeschnik, P. Rivera-Diaz-Del-Castillo:
    "Modelling hydrogen migration and trapping in steels";
    Materials & Design, 106 (2016), 205 - 215.

    More information

  535. Authors: Harald Straube, E308; J.H. Kullmann

    H. Straube, J. Kullmann:
    "Untersuchungen für eine verbesserte Wärmebehandlung von Duplex-Stählen";
    Berg- und Hüttenmännische Monatshefte (BHM), 148 Jg. (2003), 5; 163 - 171.

  536. Authors: Ralf Supplit, E165-02; Thomas Koch, E308-S; Ulrich Schubert, E165-02

    R. Supplit, T. Koch, U. Schubert:
    "Evaluation of the anti-corrosive effect of acid pickling and sol-gel coating on magnesium AZ31 alloy";
    Corrosion Science, 49 (2007), 3015 - 3023.

    More information

  537. Authors: Maja Susec, University of Ma ...; Samuel Ligon, E163-02-1; Jürgen Stampfl, E308-S; Robert Liska, E163-02-1; Peter Krajnc, University of Ma ...

    M. Susec, S. Ligon, J. Stampfl, R. Liska, P. Krajnc:
    "Hierarchically Porous Materials from Layer-by-Layer Photopolymerization of High Internal Phase Emulsions";
    Macromolecular Rapid Communications, 34 (2013), 938 - 943.

    More information

  538. Authors: Helena Svajdlenková, Polymer Institut ...; Ondrej Sausa, Slovac Academy o ...; Igor Matko, Slovac Academy o ...; Thomas Koch, E308-S; Christian Gorsche, E163-02-1

    H. Svajdlenková, O. Sausa, I. Matko, T. Koch, C. Gorsche:
    "Investigating the Free‐Volume Characteristics of Regulated Dimethacrylate Networks Below and Above Glass Transition Temperature";
    Macromolecular Chemistry and Physics, 07 (2018), 1 - 6.

    More information

  539. Authors: Helena Svajdlenková, Polymer Institut ...; Ondrej Sausa, Slovac Academy o ...; Johannes Steindl, E163-02-1; Thomas Koch, E308-S; Christian Gorsche, E163-02-1

    H. Svajdlenková, O. Sausa, J. Steindl, T. Koch, C. Gorsche:
    "Microstructural PALS study of regulated dimethacrylates: Thiol- versus β-allyl sulfone-based networks";
    Journal of Polymer Science Part B: Polymer Physics, 54 (2016), 23; 2476 - 2484.

    More information

  540. Authors: J Svoboda; Franz Dieter Fischer, MU Leoben; H. Riedel; Ernst Kozeschnik, E308-Gr Kozesch

    J. Svoboda, F.D. Fischer, H. Riedel, E. Kozeschnik:
    "Precipitate growth in multi-component systems with stress relaxation by diffusion and creep";
    International Journal of Plasticity, 82 (2016), 112 - 126.

    More information

  541. Authors: Jiri Svoboda, Academy of Scien ...; Ernst Gamsjaeger, MU Leoben; Franz Dieter Fischer, MU Leoben; Y. Liu, MU Leoben; Ernst Kozeschnik, E308-Gr Kozesch

    J. Svoboda, E. Gamsjaeger, F.D. Fischer, Y. Liu, E. Kozeschnik:
    "Diffusion processes in a migrating interface: The thick-interface model";
    Acta Materialia, 59 (2011), 12; 4775 - 4786.

    More information

  542. Authors: Jiri Svoboda, Academy of Scien ...; Yao Shan, E308-Gr Kozesch; Franz Dieter Fischer, MU Leoben

    J. Svoboda, Y.V. Shan, F.D. Fischer:
    "A new self-consistent model for thermodynamics of binary solutions";
    Scripta Materialia, 108 (2015), 27 - 30.

    More information

  543. Authors: Jiri Svoboda, Academy of Scien ...; Yao Shan, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch; Franz Dieter Fischer, MU Leoben

    J. Svoboda, Y.V. Shan, E. Kozeschnik, F.D. Fischer:
    "A thermokinetic model for Mg-Si couple formation in Al-Mg-Si alloys";
    Modelling and Simulation in Materials Science and Engineering, 24 (2016), 1 - 16.

    More information

  544. Authors: Jiri Svoboda, Academy of Scien ...; Yao Shan, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch; Franz Dieter Fischer, MU Leoben

    J. Svoboda, Y.V. Shan, E. Kozeschnik, F.D. Fischer:
    "Couples and pairs formation-thermodynamic and kinetic modelling applied to Al-Mg-Si";
    Modelling and Simulation in Materials Science and Engineering, 25 (2017), 6; 1 - 15.

    More information

  545. Authors: Jiri Svoboda, Academy of Scien ...; Yao Shan, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch; Franz Dieter Fischer, MU Leoben

    J. Svoboda, Y.V. Shan, E. Kozeschnik, F.D. Fischer:
    "Determination of depths of multiple traps for interstitials and their influence on diffusion kinetics";
    Modelling and Simulation in Materials Science and Engineering, 22 (2014), 6; 1 - 16.

    More information

  546. Authors: Jiri Svoboda, Academy of Scien ...; Yao Shan, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch; Franz Dieter Fischer, MU Leoben

    J. Svoboda, Y.V. Shan, E. Kozeschnik, F.D. Fischer:
    "Determination of depths of traps for interstitials from thermodynamic data: a new view on carbon trapping and diffusion";
    Modelling and Simulation in Materials Science and Engineering, 21 (2013), 6; 065012 - 065026.

    More information

  547. Authors: Jiri Svoboda, Academy of Scien ...; Gerald Zickler, CDL ESOP - MU Leoben; Ernst Kozeschnik, E308-Gr Kozesch; Franz Dieter Fischer, MU Leoben

    J. Svoboda, G. Zickler, E. Kozeschnik, F.D. Fischer:
    "Kinetics of interstitial segregation in Cottrell atmospheres and grain boundaries";
    Philosophical Magazine Letters, Vol 95, No. 9 (2015), 9; 458 - 465.

    More information

  548. Authors: L. Székely; G. Sáfrán; V. Kis; Z.E. Horváth; Paul Heinz Mayrhofer, E308-GrMayrh; M. Moser; G. Radnóczi; F. Misják; P.B. Barna

    L. Székely, G. Sáfrán, V. Kis, Z. Horváth, P.H. Mayrhofer, M. Moser, G. Radnóczi, F. Misják, P. Barna:
    "Crossover of texture and morphology in (Ti1-xAlx)1-yYyN alloy films and the pathway of structure evolution";
    Surface & Coatings Technology, 257 (2014), 3 - 14.

  549. Authors: Passakorn Tesavibul, E308-S; Ruth Felzmann, E308-S; Simon Gruber, E308-S; Robert Liska, E163-02-1; Ian Thompson, King's College L ...; Aldo Boccaccini, University of Er ...; Jürgen Stampfl, E308-S

    P. Tesavibul, R. Felzmann, S. Gruber, R. Liska, I. Thompson, A. Boccaccini, J. Stampfl:
    "Processing of 45S5 Bioglass by lithography-based additive manufacturing";
    Materials Letters, 74 (2012), 81 - 84.

    More information

  550. Authors: Sabrina Theis, JKU Linz; Aitziber Iturmendi, TCKT; Christian Gorsche, E163-02-1; Marco Orthofer, JKU Linz; Markus Lunzer, E163-02-1; Stefan Baudis, E163-02-1; Aleksandr Ovsianikov, E308-S; Robert Liska, E163-02-1; Uwe Monkowius, JKU Linz; Ian Teasdale, Johannes Kepler Univ

    S. Theis, I. Iturmendi, C. Gorsche, M. Orthofer, M. Lunzer, S. Baudis, A. Ovsianikov, R. Liska, U. Monkowius, I. Teasdale:
    "Durch sichtbares Licht und Nahinfrarotstrahlung abbaubare supramolekulare Metallo-Gele";
    Angewandte Chemie, 129 (2017), 50; 16071 - 16075.

    More information

  551. Authors: Sabrina Theis, JKU Linz; Aitziber Iturmendi, TCKT; Christian Gorsche, E163-02-1; Marco Orthofer, JKU Linz; Markus Lunzer, E163-02-1; Stefan Baudis, E163-02-1; Aleksandr Ovsianikov, E308-S; Robert Liska, E163-02-1; Uwe Monkowius, JKU Linz; Ian Teasdale, Johannes Kepler Univ

    S. Theis, I. Iturmendi, C. Gorsche, M. Orthofer, M. Lunzer, S. Baudis, A. Ovsianikov, R. Liska, U. Monkowius, I. Teasdale:
    "Metallo-​Supramolecular Photocleavable Gels Sensitive to Visible and Near Infrared Irradiation";
    Angewandte Chemie International Edition, 56 (2017), 50; 15857 - 15860.

    More information

  552. Authors: Thomas Tiefenböck; Lena Hirtler, MedUni WIen; Markus Winnisch; Harald Binder, MedUni Wien; Thomas Koch, E308-S; Micha Komjati; Marcus Hofbauer, MedUni Wien; Roman Ostermann, MedUni Wien

    T. Tiefenböck, L. Hirtler, M Winnisch, H. Binder, T. Koch, M. Komjati, M. Hofbauer, R. Ostermann:
    "The buried knot technique for all inside graft link preparation leads to superior biomechanical graft link stability";
    Scientific Reports, 9 (2019), 1488; 1 - 8.

    More information

  553. Authors: Thomas Tiefenböck; Lena Hirtler, MedUni WIen; Markus Winnisch; Julian Jöstl; Thomas Koch, E308-S; Micha Komjati; Marcus Hofbauer, MedUni Wien; Roman Ostermann, MedUni Wien

    T. Tiefenböck, L. Hirtler, M Winnisch, J. Jöstl, T. Koch, M. Komjati, M. Hofbauer, R. Ostermann:
    "A bigger suture diameter for anterior cruciate ligament allinside graft link preparation leads to better graft stability: An anatomical specimen study";
    Knee, 25 (2018), 3; 427 - 433.

    More information

  554. Authors: Alexander Timoshenkov, IWS, TU Graz; Piotr Warczok, E308-Gr Kozesch; Mihaela Albu, TU Graz (FELMI); Jürgen Klarner, voestalpine Tubulars; Ernst Kozeschnik, E308-Gr Kozesch; Romain Bureau, IWS, TU Graz; Christof Sommitsch, IWS - TU Graz

    A. Timoshenkov, P. Warczok, M. Albu, J. Klarner, E. Kozeschnik, R. Bureau, C. Sommitsch:
    "Modelling the dynamic recrystallization in C-Mn micro-alloyed steel during thermo-mechanical treatment using cellular automata";
    Computational Materials Science, 94 (2014), 85 - 94.

    More information

  555. Authors: Alexander Timoshenkov, IWS, TU Graz; Piotr Warczok, E308-Gr Kozesch; Mihaela Albu, TU Graz (FELMI); Jürgen Klarner, voestalpine Tubulars; Ernst Kozeschnik, E308-Gr Kozesch; Gerald Gruber, IWS, TU Graz; Christof Sommitsch, IWS - TU Graz

    A. Timoshenkov, P. Warczok, M. Albu, J. Klarner, E. Kozeschnik, G. Gruber, C. Sommitsch:
    "Influence of deformation on phase transformation and precipitation of steels for oil country tubular goods";
    Steel Research International, 85 (2014), 6; 954 - 967.

    More information

  556. Authors: Domonkos Tolnai, E308-D; Hans-Peter Degischer, E308-D; J. Lendvai

    D. Tolnai, H.P. Degischer, J. Lendvai:
    "Characterization of phasesin an Al casting alloy by synchrotron tomography";
    Physica Status Solidi A, 206 (2009), 8; 1850 - 1854.

  557. Authors: Domonkos Tolnai, E308-D; Guillermo Requena, E308-D; Peter Cloetens, ESRF-Grenoble; J. Lendvai; Hans-Peter Degischer, E308-D

    D. Tolnai, G. Requena, P. Cloetens, J. Lendvai, H.P. Degischer:
    "Effect of solution heat treatment on the internal architecture and compressive strength of an AlMg4.7Si8 alloy";
    Materials Science and Engineering A, 585 (2013), -; 480 - 487.

    More information

  558. Authors: Domonkos Tolnai, E308-D; Guillermo Requena, E308-D; Peter Cloetens, ESRF-Grenoble; J. Lendvai; Hans-Peter Degischer, E308-D

    D. Tolnai, G. Requena, P. Cloetens, J. Lendvai, H.P. Degischer:
    "Sub-micrometre holotomographic characterisation of the effects of solution heat treatment on an AlMg7.3Si3.5 alloy";
    Materials Science and Engineering A, 550 (2012), 214 - 221.

  559. Authors: Domonkos Tolnai, E308-D; Gabor Szakacs; Guillermo Requena, E308-D; Andreas Stark; Norbert Schell; K.U. Kainer; Norbert Hort

    D. Tolnai, G. Szakacs, G. Requena, A. Stark, N. Schell, K. Kainer, N. Hort:
    "Study of the solidification of AS alloys combining in situ synchrotron diffraction and differential scanning calorimetry";
    Materials Science Forum, 765 (2013), -; 286 - 290.

    More information

  560. Authors: Domonkos Tolnai, E308-D; Peter Townsend; Guillermo Requena, E308-D; L Salvo; J. Lendvai; Hans-Peter Degischer, E308-D

    D. Tolnai, P. Townsend, G. Requena, L. Salvo, J. Lendvai, H.P. Degischer:
    "In situ synchrotron tomographic investigation of the solidification of an AlMg4.7Si8 alloy";
    Acta Materialia, 60 (2012), 2568 - 2577.

  561. Authors: Jan Torgersen, E308-S; Aleksandr Ovsianikov, E308-S; Vladimir Mironov, E308-S; Niklas Ulrich Pucher, E163-02-1; Xiaohua Qin, E163-02-1; Zhiquan Li, E163-02-1; Klaus Cicha, E308-S; Thomas Machacek, Vienna Biocenter; Verena Jantsch-Plunger, Vienna Biocenter; Robert Liska, E163-02-1; Jürgen Stampfl, E308-S

    J. Torgersen, A. Ovsianikov, V. Mironov, N.U Pucher, X.H. Qin, Z. Li, K. Cicha, T. Machacek, V. Jantsch-Plunger, R. Liska, J. Stampfl:
    "Photo-sensitive hydrogels for threedimensional laser microfabrication in the presence of whole organisms";
    Journal of Biomedical Optics, 17 (2012), 10; 1 - 10.

    More information

  562. Authors: Jan Torgersen, E308-S; Xiaohua Qin, E163-02-1; Zhiquan Li, E163-02-1; Aleksandr Ovsianikov, E308-S; Robert Liska, E163-02-1; Jürgen Stampfl, E308-S

    J. Torgersen, X.H. Qin, Z. Li, A. Ovsianikov, R. Liska, J. Stampfl:
    "Hydrogels for Two-Photon Polymerization: A Toolbox for Mimicking the Extracellular Matrix";
    Advanced Functional Materials, 10 (2013), 6.

    More information

  563. Authors: Maximilian Tromayer, E163-02-1; Agnes Dobos, E308-S; Peter Gruber, E308-S; Aliasghar Ajami, E134-03; Roman Dedic, Charles Universi ...; Aleksandr Ovsianikov, E308-S; Robert Liska, E163-02-1

    M. Tromayer, A. Dobos, P. Gruber, A. Ajami, R. Dedic, A. Ovsianikov, R. Liska:
    "A biocompatible diazosulfonate initiator for direct encapsulation of human stem cells via two-photon polymerization";
    Polymer Chemistry, 9 (2018), 22; 3108 - 3117.

    More information

  564. Authors: Maximilian Tromayer, E163-02-1; Peter Gruber, E308-S; Marica Markovic, E308-S; Arnulf Rosspeintner, TU-Graz; Eric Vauthey, Univ. Genf; Heinz Redl, Austrian Cluster ...; Aleksandr Ovsianikov, E308-S; Robert Liska, E163-02-1

    M. Tromayer, P. Gruber, M. Markovic, A. Rosspeintner, E. Vauthey, H. Redl, A. Ovsianikov, R. Liska:
    "A biocompatible macromolecular two-​photon initiator based on hyaluronan";
    Polymer Chemistry, 8 (2017), 2; 451 - 460.

    More information

  565. Authors: Maximilian Tromayer, E163-02-1; Peter Gruber, E163-02-1; Arnulf Rosspeintner, TU Graz; Aliasghar Ajami, E134-03; Wolfgang Husinsky, E134-03; F. Plasser; Leticia Gonzalez; Eric Vauthey, Univ.Geneva; Aleksandr Ovsianikov, E308-S; Robert Liska, E163-02-1

    M. Tromayer, P. Gruber, A. Rosspeintner, A. Ajami, W. Husinsky, F. Plasser, L. Gonzalez, E. Vauthey, A. Ovsianikov, R. Liska:
    "Wavelength-optimized Two-Photon Polymerization Using Initiators Based on Multipolar Aminostyryl-1,3,5-triazines";
    Scientific Reports, 8 (2018), 1727301 - 1727311.

    More information

  566. Authors: Julien Troufflard, Univ Bretagne-Sud; Guillermo Requena, E308-D; Sandrine Thuillier, Univ Bretagne-Sud; Eric Maire

    J. Troufflard, G. Requena, S. Thuillier, E. Maire:
    "Ductile damage in tension and bending for DP980 steel sheets";
    Key Engineering Materials, 554-557 (2013), -; 110 - 117.

    More information

  567. Authors: Claudia Turecek, L. Boltzmann Inst.; Monika Schuster, E308-S; Franz Varga, LBIO; Robert Liska, E163-02-1; Bertrand Kaiser, E308-S; Jürgen Stampfl, E308-S; K. Klaushofer

    C. Turecek, M. Schuster, F. Varga, R. Liska, B. Kaiser, J. Stampfl, K. Klaushofer:
    "Evaluation and influence of photopolymers, capable for rapid prototyping on proliferation and morphologiy of osteoblasts";
    Calcified Tissue International, 78 (2006), 71 P127.

  568. Authors: Marko Turnsek, PolyOrgLab; Peter Krajnc, University of Ma ...; Robert Liska, E163-02-1; Thomas Koch, E308-S

    M. Turnsek, P. Krajnc, R. Liska, T. Koch:
    "Macroporous alumina with cellular interconnected morphology from emulsion templated polymer composite precursors";
    Journal of the European Ceramic Society, 36 (2016), 1045 - 1051.

    More information

  569. Authors: Jasper Van Hoorick, Polymer Chemistr ...; Peter Gruber, E308-S; Marica Markovic, E308-S; Mélanie Rollot, Ghent University,; Geert‐Jan Graulus, Ghent University; Maxime Vagenende, Ghent University; Maximilian Tromayer, E163-02-1; Jurgen Van Erps, Ghent University ...; Hugo Thienpont, Ghent University ...; José C. Martins, Ghent University; Stefan Baudis, E163-02-1; Aleksandr Ovsianikov, E308-S; Peter Dubruel, Polymer Chemistr ...; Sandra Van Vlierberghe, Polymer Chemistr ...

    J. Van Hoorick, P. Gruber, M. Markovic, M. Rollot, G. Graulus, M. Vagenende, M. Tromayer, J Van Erps, H Thienpont, J. Martins, S. Baudis, A. Ovsianikov, P. Dubruel, S. Van Vlierberghe:
    "Highly Reactive Thiol‐Norbornene Photo‐Click Hydrogels: Toward Improved Processability";
    Macromolecular Rapid Communications, 39 (2018), 14, paper 1800181; #.

  570. Authors: Jasper Van Hoorick, Ghent University; Peter Gruber, E308-S; Marica Markovic, E308-S; Maximilian Tromayer, E163-02-1; Juergen Van Erps, Vrije Universite ...; Hugo Thienpont, Vrije Universite ...; Robert Liska, E163-02-1; Aleksandr Ovsianikov, E308-S; Peter Dubruel, Ghent University; Sandra Van Vlierberghe, Ghent University

    J. Van Hoorick, P. Gruber, M. Markovic, M. Tromayer, J. Van Erps, H. Thienpont, R. Liska, A. Ovsianikov, P. Dubruel, S. Van Vlierberghe:
    "Cross-​Linkable Gelatins with Superior Mechanical Properties Through Carboxylic Acid Modification: Increasing the Two-​Photon Polymerization Potential Quick View Other Sources";
    Biomacromolecules, 18 (2017), 10; 3260 - 3272.

    More information

  571. Authors: Ksenija Varga; Michael F. Noisternig; Ulrich J. Griesser; Linda Aljaz; Thomas Koch, E308-S

    K Varga, M. F. Noisternig, U. J. Griesser, L. Aljaz, T. Koch:
    "Thermal and sorption studies of flame-resistant fibers";
    Lenzinger Berichte, 89 (2011), 50 - 59.

    More information

  572. Authors: Annika Vieweg, mcl Forschung GmbH; Erwin Povoden-Karadeniz, E308-Gr Kozesch; Gerald Ressel, mcl Forschung GmbH; Petri Prevedel, mcl Forschung GmbH; Tomasz Wojcik, E308-Gr Kozesch; Francisca Mendez-Martin, MUL; Andreas Stark, Helmholtz Geesthacht; Jozef Keckes, MUL; Ernst Kozeschnik, E308-Gr Kozesch

    A. Vieweg, E. Povoden-Karadeniz, G. Ressel, P. Prevedel, T. Wojcik, F. Mendez-Martin, A. Stark, J. Keckes, E. Kozeschnik:
    "Phase evolution and carbon redistribution during continuous tempering of martensite studied with high resolution techniques";
    Materials & Design, 136 (2017), 214 - 222.

    More information

  573. Authors: Yuliya Voronko, E308-S; Boril Chernev; Gabriele Eder

    Y Voronko, B. Chernev, G Eder:
    "Spectroscopic investigations on thin adhesive layers in multi-material laminates";
    Applied Spectroscopy, 68 (2014), 5; 584 - 592.

    More information

  574. Authors: Yuliya Voronko, E308-S; Gabriele Eder; Marlene Knausz; Gernot Oreski; Thomas Koch, E308-S; Karl Berger

    Y Voronko, G Eder, M Knausz, G Oreski, T. Koch, K Berger:
    "Correlation of the loss in photovoltaic module performance with the ageing behaviour of the backsheets used";
    Progress in Photovoltaics, 23 (2015), 11; 1501 - 1515.

    More information

  575. Authors: M. Vratnica; Z. Cvijovic; Hans-Peter Degischer, E308-D; Guillermo Requena, E308-D; Gerhard Rumplmair, E057B; M. Rakin

    M. Vratnica, Z. Cvijovic, H.P. Degischer, G. Requena, G. Rumplmair, M. Rakin:
    "Crack Growth Resistance of Overaged Al-Zn-Mg-Cu Alloys";
    Materials Science Forum, 494 (2005), 217 - 222.

  576. Authors: J.H. Waite; Helga C. Lichtenegger, E308-S; Galen D. Stucky; Paul Hansma

    J.H. Waite, H. Lichtenegger, G. D. Stucky, P. Hansma:
    "Exploring Molecular and Mechanical Gradients in Structural Bioscaffolds";
    Biochemistry (invited), 43 (2004), 24; 7653 - 7662.

  577. Authors: Jieping Wang, ETH Zürich; Sascha Daniel Stanic, E163-02-1, E308; Altan Alpay Altun, Lithoz GmbH; Kurt Dietliker, ETH Zürich; Martin Schwentenwein, Lithoz GmbH; Lu Jin, ETH Zürich; Jürgen Stampfl, E308-S; Stefan Baudis, E163-02-1; Robert Liska, E163-02-1; Hansjörg Grützmacher, ETH Zürich

    J. Wang, S. Stanic, A. Altun, K. Dietliker, M. Schwentenwein, L. Jin, J. Stampfl, S. Baudis, R. Liska, H. Grützmacher:
    "A highly efficient waterborne photoinitiator for visible-light-induced three-dimensional printing of hydrogels";
    Chemical Communications, 54 (2018), 920 - 923.

    More information

  578. Authors: L. Wang; Anke Pyzalla, E308-P; W. Stadlbauer; E.A. Werner

    L. Wang, A. Pyzalla, W. Stadlbauer, E. Werner:
    "Microstructure features on rolling surfaces of railway rails subjected to heavy loading";
    Materials Science and Engineering A, 359 (2003), 31 - 43.

  579. Authors: Fernando Warchomicka, E308-D; Cecilia Poletti, E308-D; M Stockinger, BÖHLER GmbH

    F. Warchomicka, C. Poletti, M. Stockinger:
    "Study of the hot deformation behaviour in Ti-5Al-5Mo-5V-3Cr-1Zr";
    Materials Science and Engineering A, 528 (2011), 28; 8277 - 8285.

    More information

  580. Authors: Fernando Warchomicka, E308-D; M Stockinger, BÖHLER GmbH; Hans-Peter Degischer, E308-D

    F. Warchomicka, M. Stockinger, H.P. Degischer:
    "Quantitative analysis of the microstructure of near β titanium alloy during compression tests";
    Journal of Materials Processing Technology, 177 (2006), 473 - 477.

  581. Authors: Piotr Warczok, E308-Gr Kozesch; David Reith, TUW, Chemistry; Michael Schober, MU Leoben; Harald Leitner, Universität Leoben; Raimund Podloucky, TUW, Chemistry; Ernst Kozeschnik, E308-Gr Kozesch

    P. Warczok, D. Reith, M. Schober, H. Leitner, R. Podloucky, E. Kozeschnik:
    "Investigation of Cu precipitation in bcc-Fe - Comparison of numerical analysis with experiment";
    International Journal of Materials Research, 102 (2011), 6; 709 - 716.

    More information

  582. Authors: Piotr Warczok, E308-Gr Kozesch; Jaroslav Zenisek, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    P. Warczok, J. Zenisek, E. Kozeschnik:
    "Atomistic and continuums modeling of cluster migration and coagulation in precipitation reactions";
    Computational Materials Science, 60 (2012), 59 - 65.

    More information

  583. Authors: Lawrence Charles Whitmore, E057B; Mohammad Reza Ahmadi, E308-Gr Kozesch; Laure Guetaz, CEA Grenoble; Harald Leitner, Böhler; Erwin Povoden-Karadeniz, E308-Gr Kozesch; M Stockinger, BÖHLER GmbH; Ernst Kozeschnik, E308-Gr Kozesch

    L.C. Whitmore, M.R. Ahmadi, L Guetaz, H. Leitner, E. Povoden-Karadeniz, M. Stockinger, E. Kozeschnik:
    "The microstructure of heat-treated nickel-based superalloy 718Plus";
    Materials Science and Engineering A, 610 (2014), 39 - 45.

  584. Authors: Lawrence Charles Whitmore, E057B; Mohammad Reza Ahmadi, E308-Gr Kozesch; M Stockinger, BÖHLER GmbH; Erwin Povoden-Karadeniz, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch; Harald Leitner, Böhler

    L.C. Whitmore, M.R. Ahmadi, M. Stockinger, E. Povoden-Karadeniz, E. Kozeschnik, H. Leitner:
    "Microstructural investigation of thermally aged nickel-based superalloy 718Plus";
    Materials Science and Engineering A, 594 (2014), 253 - 259.

    More information

  585. Authors: Lawrence Charles Whitmore, E057B; Harald Leitner, Universität Leoben; Erwin Povoden-Karadeniz, E308-Gr Kozesch; Rene Radis; M Stockinger, BÖHLER GmbH

    L.C. Whitmore, H. Leitner, E. Povoden-Karadeniz, R. Radis, M. Stockinger et al.:
    "Transmission electron microscopy of single and double aged 718Plus superalloy";
    Materials Science and Engineering A, 534 (2012), 413 - 423.

    More information

  586. Authors: Emanuel Wild, FH Vorarlberg; L. Wang; B. Hasse; T. Wroblewski; G. Goerigk; Anke Pyzalla, E308-P

    E. Wild, L. Wang, B. Hasse, T. Wroblewski, G. Goerigk, A. Pyzalla:
    "Microstructure alterarations at the surface of a heavily corrugated rail with strong ripple formation ";
    Wear, 254 (2003), 876 - 883.

  587. Authors: Rupert Wimmer, Boku; Bernhard Steyrer, E308-S; Josef Woess, Boku; Tim Koddenberg, Boku; Norbert Mundigler, Boku

    R. Wimmer, B. Steyrer, J. Woess, T. Koddenberg, N. Mundigler:
    "3D Printing and Wood";
    Pro Ligno, 11 (2015), 4; 144 - 149.

  588. Authors: Alexander Woesz; M. Rumpler; Jürgen Stampfl, E308-S; Franz Varga, LBIO; N. Fratzl-Zelman; P. Roschger; Peter Fratzl; K. Klaushofer

    A. Woesz, M. Rumpler, J. Stampfl, F. Varga, N. Fratzl-Zelman, P. Roschger, P. Fratzl, K. Klaushofer:
    "Towards bone replacement materials from calcium phosphates via rapid prototyping and ceramic gelcasting";
    Materials Science & Engineering C - Biomimetic and Supramolecular Systems, 25 (2005), 181 - 186.

    More information

  589. Authors: Alexander Woesz; Jürgen Stampfl, E308-S; Peter Fratzl

    A. Woesz, J. Stampfl, P. Fratzl:
    "Cellular Solids beyond the Apparent Density - an Experimental Assessment of Mechanical Properties";
    Advanced Materials, 6 (2004), 3; 134 - 138.

    More information

  590. Authors: Tomasz Wojcik, E308-Gr Kozesch; Markus Rath, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    T. Wojcik, M. Rath, E. Kozeschnik:
    "Characterisation of secondary phases in Ni-base superalloy Rene 65";
    Materials Science and Technology, 34 (2018), 13; 1558 - 1564.

    More information

  591. Authors: Yu X Xu, E308-GrMayrh; Helmut Riedl, E308-GrMayrh; David Holec, MU Leoben; Li Chen, State Key Laboratory; Yong Du, State Key Laboratory; Paul Heinz Mayrhofer, E308-GrMayrh

    Y. Xu, H. Riedl, D. Holec, L. Chen, Y. Du, P.H. Mayrhofer:
    "Thermal stability and oxidation resistance of sputtered TiAlCrN hard coatings";
    Surface & Coatings Technology, Supplement C (2017), 324; 48 - 56.

    More information

  592. Authors: Z Xu; Zaoli Zhang; Matthias Bartosik, E308-GrMayrh; Y. Zhang; Paul Heinz Mayrhofer, E308-GrMayrh; Y He

    Z. Xu, Z. Zhang, M. Bartosik, Y. Zhang, P.H. Mayrhofer, Y. He:
    "Insight into the structural evolution during TiN film growth via atomic resolution TEM";
    Journal of Alloys and Compounds, 754 (2018), 257 - 267.

  593. Authors: Tsunetomo Yamada; Holger Euchner, E308-GrMayrh; Marc de Boissieu; Ryuji Tamura; Hiroyuki Takakura; Cesar Pay Gomez

    T. Yamada, H. Euchner, M. de Boissieu, R. Tamura, H. Takakura, C. Gomez:
    "Short and long-range ordering during the phase transition of the Zn6Sc 1/1 cubic approximant";
    Journal of Physics: Condensed Matter, 25 (2013), 205405.

  594. Authors: B. Yang, E308-D; Hans-Peter Degischer, E308-D; H Presslinger; G Xia; P Reisinger

    B. Yang, H.P. Degischer, H. Presslinger, G. Xia, P. Reisinger:
    "Influence of Chemical Composition on High Temperature Tensile Properties of Carbon Steels";
    Berg- und Hüttenmännische Monatshefte (BHM), 150 (2005), 9; 313 - 320.

  595. Authors: B. Yang, E308-D; Hans-Peter Degischer, E308-D; G Xia; H Presslinger

    B. Yang, H.P. Degischer, G. Xia, H. Presslinger:
    "Hot Toughness of Continuously Cast Steel Slabs during Reheating";
    Steel Research International, 78 (2007), 6; 482 - 491.

  596. Authors: Jakub Zalesak, MU Leoben; Matthias Bartosik, E308-GrMayrh; Rostislav Daniel; Christian Mitterer; Christina Krywka; Daniel Kiener; Paul Heinz Mayrhofer, E308-GrMayrh; Jozef Keckes, MUL

    J. Zalesak, M. Bartosik, R. Daniel, C. Mitterer, C. Krywka, D. Kiener, P.H. Mayrhofer, J. Keckes:
    "Cross-sectional structure-property relationship in a graded nanocrystalline Ti1-xAlxN thin film";
    Acta Materialia, 102 (2016), 212 - 219.

    More information

  597. Authors: Sabine Zamberger, E308-Gr Kozesch; Peter Lang, E308-Gr Kozesch; Gerald Klösch; Jürgen Klarner, voestalpine Tubulars; Ernst Kozeschnik, E308-Gr Kozesch

    S. Zamberger, P. Lang, G. Klösch, J. Klarner, E. Kozeschnik:
    "Long-range diffusion of H in the presence of traps in a microalloyed steel";
    Computational Materials Science, 113 (2016), 266 - 274.

    More information

  598. Authors: Sabine Zamberger, E308-Gr Kozesch; Milan Pudar; K Spiradek-Hahn; Michael Reischl; Ernst Kozeschnik, E308-Gr Kozesch

    S. Zamberger, M. Pudar, K. Spiradek-Hahn, M. Reischl, E. Kozeschnik:
    "Numerical simulation of the evolution of primary and secondary Nb(CN), Ti(CN) and AlN in Nb-microalloyed steel during continuous casting";
    International Journal of Materials Research, 103 (2012), 6; 680 - 687.

    More information

  599. Authors: Sabine Zamberger, E308-Gr Kozesch; Lawrence Charles Whitmore, E057B; Sabine Krisam, E308-Gr Kozesch; Tomasz Wojcik, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch

    S. Zamberger, L.C. Whitmore, S. Krisam, T. Wojcik, E. Kozeschnik:
    "Experimental and computational study of cementite precipitation in tempered martensite";
    Modelling and Simulation in Materials Science and Engineering, 23 (2015), Number 5, Paper 055012.

    More information

  600. Authors: Sabine Zamberger, E308-Gr Kozesch; Tomasz Wojcik, E308-Gr Kozesch; Jürgen Klarner, voestalpine Tubulars; Gerald Klösch; Herbert Schifferl; Ernst Kozeschnik, E308-Gr Kozesch

    S. Zamberger, T. Wojcik, J. Klarner, G. Klösch, H. Schifferl, E. Kozeschnik:
    "Computational and Experimental Analysis of Carbo-Nitride Precipitation in Tempered Martensite";
    Steel Research International, 84 (2013), 1; 20 - 30.

    More information

  601. Authors: Jaroslav Zenisek, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch; Jiri Svoboda, Academy of Scien ...; Franz Dieter Fischer, Universität Leoben

    J. Zenisek, E. Kozeschnik, J. Svoboda, F. Fischer:
    "A combined cluster dynamic/kinetic Monte Carlo model for precipitate nucleation in interstitial/substitutional alloys";
    Modelling and Simulation in Materials Science and Engineering, 16 (2008), 7.

    More information

  602. Authors: Jaroslav Zenisek, E308-Gr Kozesch; Ernst Kozeschnik, E308-Gr Kozesch; Jiri Svoboda, Academy of Scien ...; Franz Dieter Fischer, MU Leoben

    J. Zenisek, E. Kozeschnik, J. Svoboda, F.D. Fischer:
    "Modelling the role of compositional fluctuations in nucleation kinetics";
    Acta Materialia, 91 (2015), 91; 365 - 376.

    More information

  603. Authors: Wei Zhang; Peter Vang Hendriksen; Erwin Povoden-Karadeniz, E308-Gr Kozesch; Ming Chen

    W. Zhang, P.V. Hendriksen, E. Povoden-Karadeniz, M. Chen:
    "Thermodynamic modeling of the Sr-Co-Fe-O system";
    Solid State Ionics, 292 (2016), 88 - 97.

    More information

  604. Authors: Zaoli Zhang; Xunlong Gu; David Holec, E308-GrMayrh; Matthias Bartosik, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh; Huiping Duan

    Z. Zhang, X. Gu, D. Holec, M. Bartosik, P.H. Mayrhofer, H. Duan:
    "Superlattice-induced oscillations of interplanar distances and strain effects in the CrN/AlN system";
    Physical Review B, 95 (2017), 155305-1 - 155305-7.

  605. Authors: Liangcai Zhou, E308-GrMayrh; David Holec, MU Leoben; Paul Heinz Mayrhofer, E308-GrMayrh

    L. Zhou, D. Holec, P.H. Mayrhofer:
    "Ab initio study of the alloying effect of transition metals on structure, stability and toughness of CrN";
    Journal of Physics D: Applied Physics, 46 (2013), 365301; 1 - 7.

  606. Authors: Liangcai Zhou, E308-GrMayrh; David Holec, E308-GrMayrh; Paul Heinz Mayrhofer, E308-GrMayrh

    L. Zhou, D. Holec, P.H. Mayrhofer:
    "First-principles study of elastic properties of Cr-Al-N";
    Journal of Applied Physics, 113 (2013), 043511; 1 - 8.

  607. Authors: Liangcai Zhou, E308-GrMayrh; Fedor Klimashin, E308-GrMayrh; David Holec, MU Leoben; Paul Heinz Mayrhofer, E308-GrMayrh

    L. Zhou, F. Klimashin, D. Holec, P.H. Mayrhofer:
    "Structural and mechanical properties of nitrogen-deficient cubic Cr-Mo-N and Cr-W-N systems";
    Scripta Materialia, 123 (2016), 34 - 37.

    More information

  608. Authors: Liangcai Zhou, E308-GrMayrh; Fritz Körmann; David Holec, E308-GrMayrh; Matthias Bartosik, E308-GrMayrh; Blazej Grabowski; Jörg Neugebauer; Paul Heinz Mayrhofer, E308-GrMayrh

    L. Zhou, F. Körmann, D. Holec, M. Bartosik, B. Grabowski, J. Neugebauer, P.H. Mayrhofer:
    "Structural stability and thermodynamics of CrN magnetic phases from ab initio calculations and experiment";
    Physical Review B, 90 (2014), 184102-1 - 184102-12.

  609. Authors: Gerald Zickler, CDL ESOP - MU Leoben; Rene Radis, E308-Gr Kozesch; Ronald Schnitzer, MU Leoben; Ernst Kozeschnik, E308-Gr Kozesch; M Stockinger, BÖHLER GmbH; Harald Leitner, Universität Leoben

    G. Zickler, R. Radis, R. Schnitzer, E. Kozeschnik, M. Stockinger, H. Leitner:
    "The Precipitation Behavior of Superalloy ATI Allvac®718Plus";
    Advanced Engineering Materials, 12 (2010), 176 - 183.

    More information

  610. Authors: Gerald Zickler, CDL ESOP - MU Leoben; Ronald Schnitzer, MU Leoben; Rene Radis, E308-Gr Kozesch; Rainer Hochfellner, CDLEOP - MU Leoben; Ralph Schweins; M Stockinger, BÖHLER GmbH; Harald Leitner, Universität Leoben

    G. Zickler, R. Schnitzer, R. Radis, R. Hochfellner, R. Schweins, M. Stockinger, H. Leitner:
    "Microstructure and Mechanical Properties of the Superalloy ATI Allvac 718Plus";
    Materials Science and Engineering A, 523 (2009), 1-2; 295 - 303.

    More information

  611. Authors: