Publikationsliste für Angehörige von
E325 - Institut für Mechanik und Mechatronik
als Autorinnen / Autoren bzw. wesentlich beteiligte Personen
2219 Datensätze (1983 - 2022)
Die Publikationen der Fakultät für Maschinenwesen und Betriebswissenschaften sind erst ab dem Jahr 2002 vollzählig in der Publikationsdatenbank enthalten. Publikationen aus den Jahren vor 2002 können, müssen aber nicht in der Datenbank vorhanden sein.
Bücher und Buch-Herausgaben
-
A. Alpatov, V Beletsky, V. Dranovskii, V. Khoroshilov, A. Pirozhenko, H. Troger, E. Zakrzhevskii:
"Dynamics of Tethered Space Systems";
Taylor & Francis Group,
Boca Raton, London, New York,
2010,
ISBN: 978-1-4398-3685-9;
245 S.
Zusätzliche Informationen
-
A. Belyaev, H Irschik, M. Krommer (Hrg.):
"Mechanics and Model-Based Control of Advanced Engineering Systems";
Springer,
WienNewYork,
2014,
ISBN: 978-3-7091-1570-1.
-
H. Ecker:
"Suppression of self-excited vibrations in mechanical systems by parametric stiffness excitation";
ARGESIM,
Wien,
2005,
ISBN: 3-901608-61-3;
226 S.
-
H. Ecker, K. Ellermann, F. Heitmeir (Hrg.):
"SIRM 2017 Proceedings";
TU Graz,
Graz,
2017.
Zusätzliche Informationen
-
H. Ecker, A. Steindl, S. Jakubek (Hrg.):
"Proceedings of 8th European Nonlinear Dynamics Conference";
Institut für Mechanik und Mechatronik, Technische Universität Wien,
Wien,
2014.
-
J. Edelmann, M. Plöchl, P. E. Pfeffer (Hrg.):
"Advanced Vehicle Control: Proceedings of the 13th International Symposium on Advanced Vehicle Control (AVEC'16)";
CRC Press,
The Netherlands,
2016,
ISBN: 978-1-138-02992-7;
726 S.
-
K.-O. Endlicher, A. Rischanek:
"Normen im Eisenbahnwesen";
Austrian Standards plus GmbH,
2017,
ISBN: 978-3-85402-334-0;
368 S.
-
R. Flesch, H Irschik, M. Krommer:
"Proceedings of the 3rd European Conference on Structural Control";
in Buchreihe "Schriftenreihe der Technischen Universit"at Wien",
Buchreihen-Herausgeber: R. Viertl;
TU Wien,
2005.
-
U. Gamer, W. Mack:
"Mechanik: ein einführendes Lehrbuch für Studierende der technischen Wissenschaften";
Springer,
SpringerWienNewYork,
1999,
ISBN: 3-211-82854-0.
-
P. Gruber, D. Bruckner, Ch. Hellmich, H. Schmiedmayer, H. Stachelberger (Hrg.):
"Biomimetics: Materials, Structures and Processes. Examples, Ideas and Case Studies";
Springer-Verlag, Berlin-Heidelberg,
Berlin-Heidelberg,
2011,
ISBN: 978-3-642-11933-0;
266 S.
-
H. Irretier, R. Nordmann, H. Springer (Hrg.):
"Schwingungen in rotierenden Maschinen VI";
Friedr. Vieweg & Sohn Verlagsgesellschaft,
Braunschweig/Wiesbaden,
2003,
ISBN: 3-528-03956-6;
280 S.
-
H. Irretier, R. Nordmann, H. Springer, H. Ecker (Hrg.):
"Tagungsbeiträge der 8.Internationalen Tagung "Schwingungen in rotierenden Maschinen"";
Institut für Mechanik und Mechatronik - Abt. Maschinendynamik,
Wien,
2009,
ISBN: 978-3-200-01412-1.
Zusätzliche Informationen
-
H Irschik, A. Belyaev, M. Krommer (Hrg.):
"Dynamics and Control of Advanced Structures and Machines";
Springer International Publishing,
2017,
ISBN: 978-3-319-43079-9.
-
H Irschik, M. Krommer, A. Belyaev (Hrg.):
"Advanced Dynamics and Model Based Control of Structures and Machines";
Springer,
WienNewYork,
2012,
ISBN: 978-3-7091-0796-6.
-
H Irschik, M. Krommer, K. Watanabe (Hrg.):
"Mechanics and Model Based Control of Smart Materials and Structures";
Springer,
WienNewYork,
2010,
ISBN: 978-3-211-99483-2.
-
M. Kaltenbacher (Hrg.):
"Computational Acoustics";
Springer International Publishing,
2018,
ISBN: 978-3-319-59038-7;
251 S.
Zusätzliche Informationen
-
M. Kaltenbacher:
"Numerical Simulation of Mechatronic Sensors and Actuators";
Springer-Verlag,
Heidelberg,
2015,
ISBN: 978-3-642-40169-5;
587 S.
-
Kuni Katsuyama, Toshi Sakai, H. Rossmanith (Hrg.):
"Let's Study the Strength of Structures in English";
Corona Publishing Company,
Tokyo,
2006,
ISBN: 4-339-05221-3;
175 S.
-
J. Kolerus, J. Wassermann:
"Zustandsüberwachung von Maschinen";
expert verlag,
Renningen,
2008,
ISBN: 978-3-8169-2597-2;
408 S.
Zusätzliche Informationen
-
P. Kopacek (Hrg.):
"Social Stability: The Challenge of Technology Development 2001 (SWIIS '01)";
Elsevier,
Kidlington, Oxford,
2002,
ISBN: 0-08-0439616;
115 S.
-
P. Kopacek et al. (Hrg.):
"CLAWAR / EURON / IARP Workshop on Robots in Entertainment, Leisure and Hobby ELH'04 PROCEEDINGS";
Institut für Mechanik und Mechatronik / Abteilung 6 Intelligente Handhabungs- und Robotertechnik,
Wien,
2004,
ISBN: 3-902161-04-3;
165 S.
-
P. Kopacek et al.:
"Engineering Applications of Artificial Intelligence - EAAI";
in Buchreihe "Engineering Applications of Artificial Intelligence - EAAI",
Buchreihen-Herausgeber: B. Grabot;
herausgegeben von: International Federation of Automatic Control (IFAC);
Elsevier Science Publishers B.V.,
Netherlands,
2013,
ISSN: 0952-1976.
Zusätzliche Informationen
-
P. Kopacek et al. (Hrg.):
"Information Control Problems in Manufacturing 2001 (INCOM 2001)";
Elsevier,
Kidlington, Oxford,
2002,
ISBN: 0-08-0432468;
275 S.
-
P. Kopacek, E. Hajrizi:
"Proceedings 17th IFAC Conference on International Stability, Technology and Culture TECIS 2016";
in Buchreihe "IFAC-PapersOnLine",
Buchreihen-Herausgeber: Juan Puente;
herausgegeben von: International Federation of Automatic Control - IFAC;
Elsevier Science Publishers B.V.,
2016,
329 S.
Zusätzliche Informationen
-
P. Kopacek, E. Hajrizi:
"Proceedings IFAC International Workshop on "Supplemental Ways for Improving International Stability" SWIIS2010";
in Buchreihe "Proceedings IFAC",
Buchreihen-Herausgeber: Juan Puente;
herausgegeben von: International Federation of Automatic Control (IFAC);
Elsevier Science Publishers B.V.,
Netherlands,
2010,
ISBN: 978-3-902661-92-0.
Zusätzliche Informationen
-
P. Kopacek, E. Hajrizi:
"SWIIS 2013";
in Buchreihe "Proceedings IFAC",
Buchreihen-Herausgeber: Juan Puente;
herausgegeben von: International Federation of Automatic Control (IFAC);
Elsevier Science Publishers B.V.,
Netherland,
2013,
ISBN: 978-3-902823-34-2.
Zusätzliche Informationen
-
P. Kopacek, D. Noe et al. (Hrg.):
"Intelligent Assembly and Disassembly 2001 (IAD 2001)";
Elsevier,
Kidlington, Oxford,
2002,
ISBN: 0-08-043908x;
137 S.
-
P. Kopacek, A. Weinmann:
"International Journal Automation Austria - IJAA";
in Buchreihe "International Journal Automation Austria - IJAA",
Buchreihen-Herausgeber: P. Kopacek, A. Weinmann;
IFAC Beirat Österreich,
Wien,
2013,
ISSN: 1562-2703.
Zusätzliche Informationen
-
P. Kopacek, M. Zauner:
"Leitfaden der Informations- und Kommunikationstechnik";
Springer-Verlag,
Wien,
2004,
ISBN: 3-211-00765-2;
271 S.
-
M. Kozek, A. Schirrer (Hrg.):
"Modeling and Control for a Blended Wing Body Aircraft - A Case Study";
Springer-Verlag,
Cham,
2015,
ISBN: 978-3-319-10791-2;
302 S.
Zusätzliche Informationen
-
H.C. Kuhlmann, H. Troger, P.K. Zysset (Hrg.):
"Tagungsband "International Symposium on Trends in Applications of Mathematics to Mechanics (STAMM)"";
Institut für Strömungsmechanik und Wärmeübertragung,
2006,
ISBN: 3-200-00682-x;
171 S.
-
P. Lugner (Hrg.):
"Vehicle Dynamics of Modern Passenger Cars";
CISM Lecture Notes,
Springer International Publishing,
2018,
ISBN: 978-3-319-79007-7;
428 S.
-
P. Lugner, M. Plöchl (Hrg.):
"Tire Model Performance Test (TMPT)";
Taylor & Francis Group,
2007,
ISBN: 9780415473767;
225 S.
-
P. Lugner, M. Plöchl (Hrg.):
"Tyre Models for Vehicle Dynamics Analysis";
Taylor & Francis Group,
2005.
-
W. Mack, P. Lugner, M. Plöchl:
"Angewandte Mechanik: Aufgaben und Lösungen aus Statik und Festigkeitslehre";
Springer-Verlag,
Wien,
2006,
ISBN: 3-211-25672-5;
140 S.
-
G. Mastinu, M. Plöchl (Hrg.):
"Road and off-road vehicle system dynamics handbook";
CRC Press,
2014,
ISBN: 9780849333224;
1708 S.
Zusätzliche Informationen
-
M. Rosenberger, M. Plöchl, K. Six, J. Edelmann (Hrg.):
"The Dynamics of Vehicles on Roads and Tracks";
CRC Press,
Boca Raton, Florida,
2016,
ISBN: 9781138028852;
1626 S.
-
A. Schirrer:
"Co-Simulation of Rail Car Body Vibration Control with SimPACK®";
VDM Verlag,
Saarbrücken,
2010,
ISBN: 978-3-639-30692-7;
123 S.
Zusätzliche Informationen
-
A. Schirrer, A.L. Gratzer, S. Thormann, S. Jakubek, M. Neubauer, W. Schildorfer (Hrg.):
"Energy-Efficient and Semi-Automated Truck Platooning - Research and Evaluation";
Springer International Publishing,
Cham,
2022,
ISBN: 978-3-030-88681-3;
237 S.
Zusätzliche Informationen
-
M. Schwarzbart (Hrg.):
"Stabilitätsuntersuchungen am Raumaufzug: Mit dem Aufzug in den Weltraum?";
VDM Verlag,
Saarbrücken,
2008,
ISBN: 3639014820;
68 S.
Zusätzliche Informationen
-
M Seyr:
"Autonomous Mobile Robot Motion Control: A concept for tracking control, navigation and motionplanning";
Suedwestdeutscher Verlag fuer Hochschulschriften,
2009,
ISBN: 978-3838106328;
112 S.
Zusätzliche Informationen
-
H. Springer, H. Ecker (Hrg.):
"Proceedings 7th International Conference on Rotor Dynamics";
Institute of Mechanics and Mechatronics, Vienna University of Technology,
Vienna,
2006,
ISBN: 3-200-00689-7.
-
Y. Vetyukov:
"Nonlinear Mechanics of Thin-Walled Structures. Asymptotics, Direct Approach and Numerical Analysis";
Springer-Verlag,
Wien,
2014,
ISBN: 978-3-7091-1776-7;
272 S.
Zusätzliche Informationen
Zeitschriftenartikel
-
R. Alcoberro, M.N. Durakbasa, J.M. Bauer, P. Kopacek:
"A low-cost integrated concept for the hybridisation and electric conversion of cars and other mechatronic vehicles";
Elsevier ScienceDirect IFAC-PapersOnLine,
1
(2021),
Volume 54, Issue 13;
S. 511
- 516.
Zusätzliche Informationen
-
F. Alipour, C. Brücker, D. Cook, A. Gömmel, M. Kaltenbacher, W. Mattheus, L. Mongeau, E. Naumann, R. Schwarze, I. Tokuda, S. Zörner:
"Mathematical models and numerical schemes for the simulation of human phonation";
Current Bioinformatics,
3
(2011),
6;
S. 323
- 343.
-
H. Amri, R. Feil, M. Hajek, M. Weigand:
"Possibilities and difficulties for rotorcraft using variable transmission drive trains";
CEAS Aeronautical Journal,
7
(2016),
2;
S. 335
- 346.
Zusätzliche Informationen
-
B. Angrosch, M. Plöchl, W. Reinalter:
"Mode decoupling concepts of an engine mount system for practical application";
Proceedings of the Institution of Mechanical Engineers Part K - Journal of Multi-Body Dynamics,
229
(2015),
4;
S. 331
- 343.
-
B. Angrosch, M. Plöchl, W. Reinalter:
"Suspension design by means of numerical sensitivity analysis and optimisation";
International Journal of Vehicle Design,
65
(2014),
1;
S. 52
- 72.
-
T. Apatay, E. Arslan, W. Mack:
"Effects of homogeneous and inhomogeneous heating on otating shrink fits with annular inclusion and funtionally graded hub";
Journal of Thermal Stresses,
42
(2019),
11;
S. 1458
- 1479.
-
T. Apatay, E. Arslan, W. Mack:
"Elastic-plastic design of a rotating shrink fit with functionally graded hub";
Archive of Applied Mechanics,
87
(2017),
11;
S. 1829
- 1843.
-
T. Apatay, E. Arslan, W. Mack:
"On the design of rotating elastic shrink fits with annular inclusion and functionaqlly graded hub";
Mechanics based design of structures and machines,
47
(2019),
3;
S. 339
- 355.
-
T. Apatay, W. Mack:
"On the optimum design of rotating two-layered composite tubes subject to internal heating or pressure";
Forschung im Ingenieurwesen,
79
(2015),
S. 109
- 122.
-
T. Apatay, W. Mack:
"Optimization of two-layered steel/aluminium hollow cylinders under combined load";
PAMM,
15
(2015),
S. 167
- 168.
-
E. Arslan:
"A comparison between multi-layered and functionally graded spherical pressure vessels";
PAMM,
13
(2013),
S. 89
- 90.
-
E. Arslan:
"Deformation and Electrical Behaviours of Functionally Graded Piezoelectric Curved Sensors";
Journal of Polytechnic,
19
(2016),
4;
S. 593
- 602.
-
E. Arslan:
"Tabakalı ve fonksiyonel olarak kademelendirilmiş küresel basınç kapları üzerine analiz (Analysis on multi-layered and functionally graded spherical pressure vessels)";
Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi,
23
(2017),
1;
S. 24
- 35.
-
E. Arslan, A.N. Eraslan:
"Analytical solution to the bending of a nonlinearly hardening wide curved bar";
Acta Mechanica,
210
(2010),
S. 71
- 84.
-
E. Arslan, A.N. Eraslan:
"Analytical stress analysis of partially plastic graded curved bars subjected to pure bending";
PAMM,
11
(2011).
-
E. Arslan, A.N. Eraslan:
"Bending of graded curved bars at elastic limits and beyond";
International Journal of Solids and Structures,
50
(2013),
S. 806
- 814.
-
E. Arslan, A.N. Eraslan, W. Mack:
"Elastic-plastic states of a rotating inhomogeneously heated strain hardening hollow shaft";
PAMM,
7
(2007),
S. 4040051
- 4040052.
-
E. Arslan, M. Haskul:
"Generalized plane strain solution of a thick-walled cylindrical panel subjected to radial heating";
Acta Mechanica,
226
(2015),
S. 1213
- 1225.
-
E. Arslan, W. Mack:
"Effects of parameter uncertainties on the forecasted behavior of thermomechanically loaded thick-walled functionally graded spherical structures";
Acta Mechanica,
233
(2022),
S. 1865
- 1880.
-
E. Arslan, W. Mack:
"Elastic limit analysis of a thick-walled cylindrical panel subject to radial heating";
PAMM,
12
(2012),
S. 219
- 220.
-
E. Arslan, W. Mack:
"Elastic-plastic states of a radially heated thick-walled cylindrically curved panel";
Forschung im Ingenieurwesen,
78
(2014),
S. 1
- 11.
-
E. Arslan, W. Mack:
"Shrink fit with FGM-hub subject to heating and rotation";
PAMM,
15
(2015),
S. 169
- 170.
-
E. Arslan, W. Mack:
"Shrink fit with solid inclusion and functionally graded hub";
Composite Structures,
121
(2015),
S. 217
- 224.
-
E. Arslan, W. Mack, T. Apatay:
"Thermo-mechanically loaded steel/aluminum functionally graded spherical containers and pressure vessels";
International Journal of Pressure Vessels and Piping,
191
(2021).
-
E. Arslan, W. Mack, A.N. Eraslan:
"Effect of a temperature cycle on a rotating elastic-plastic shaft";
Acta Mechanica (eingeladen),
195
(2008),
S. 129
- 140.
-
E. Arslan, W. Mack, A.N. Eraslan:
"The rotating elastic-plastic hollow shaft conveying a hot medium";
Forschung im Ingenieurwesen,
74
(2010),
S. 27
- 39.
-
E. Arslan, W. Mack, A.N. Eraslan:
"Transient heating of a rotating elastic-plastic solid shaft";
PAMM,
8
(2008),
S. 10257
- 10258.
-
E. Arslan, W. Mack, U. Gamer:
"Elastic limits of a radially heated thick-walled cylindrically curved panel";
Forschung im Ingenieurwesen,
77
(2013),
S. 13
- 23.
-
E. Arslan, I. Sülü:
"Yielding of two-layer curved bars under pure bending";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik,
94
(2014),
9;
S. 713
- 720.
-
E. Arslan, R. Usta:
"Mechanical and electrical fields of piezoelectric curved sensors";
Archives of Mechanics,
66
(2014),
6;
S. 329
- 342.
-
G. Aschauer, A. Schirrer, M. Kozek, S. Jakubek:
"PHiL pantograph testing via FE-based catenary model with absorbing boundaries";
Control Engineering Practice,
88
(2019),
S. 97
- 109.
Zusätzliche Informationen
-
W. Auzinger, H. Schmiedmayer, I. Reichl, E. Weinmüller:
"Reconstructing the knee joint mechnism from kinematic data";
Mathematical and Computer Modelling of Dynamical Systems,
16
(2010),
5;
S. 403
- 415.
Zusätzliche Informationen
-
B. Barkow, A. Steindl, H. Troger, G. Wiedermann:
"Various Methods of Controlling the Deployment of a Tethered Satellite";
Journal of Vibration and Control,
9
(2003),
S. 187
- 208.
-
E. Bartolomaeus, G.W. Niebauer, H. Schmiedmayer, G. Windischbauer:
"Untersuchungen zum Biegeverhalten einer Parakortikalen-Klammer-Cerclage-Konfiguration im Vergleich zu einer 3,5 mm Dynamischen Kompressionsplatte";
Wiener Tierärztliche Monatsschrift,
94
(2007),
7-8;
S. 184
- 191.
-
B. Basu, O. Bursi, F Casciati, S. Casciati, A.E. del Grosso, M. Domaneschi, L. Faravelli, J. Holnicki-Sculz, H Irschik, M. Krommer, M. Lepidi, A. Martelli, B. Ozturk, F. Pozo, G. Pujol, Z. Rakicevic, J. Rodellar:
"A European Association for the Control of Structures joint perspective. Recent studies in civil structural control across Europe";
Structural Control & Health Monitoring,
21
(2014),
S. 1414
- 1436.
Zusätzliche Informationen
-
J.M. Bauer, G. Bas, M.N. Durakbasa, P. Kopacek:
"Development Trends in Automation and Metrology";
Elsevier ScienceDirect IFAC-PapersOnLine,
Volume 48
(2015),
Issue 24;
S. 168
- 172.
Zusätzliche Informationen
-
J.M. Bauer, M.N. Durakbasa, G. Bas, E. Güclü, P. Kopacek:
"Telepresence in Education";
Elsevier ScienceDirect IFAC-PapersOnLine,
Volume 48
(2015),
Issue 24;
S. 178
- 182.
Zusätzliche Informationen
-
J.M. Bauer, P. Kopacek, F. d Apolito, L. Kräuter, I. Dorna:
"Cost Oriented (humanoid) robots";
Elsevier ScienceDirect IFAC-PapersOnLine,
Volume 48
(2015),
Issue 24;
S. 173
- 177.
Zusätzliche Informationen
-
P. Berik, A. Benjeddou, M. Krommer:
"Experimental assessment of the piezoelectric transverse d15 shear sensing mechanism";
Smart Structures and Systems,
13(4)
(2014),
S. 567
- 585.
Zusätzliche Informationen
-
P. Berik, A. Benjeddou, M. Krommer:
"Piezoceramic d15 shear-induced direct torsion actuation mechanism: a new representative experimental benchmark";
Smart Structures and Systems,
12(5)
(2013),
S. 483
- 499.
-
L. Böhler, M. Fallmann, G Görtler, J. Krail, F. Schittl, M. Kozek:
"Emission limited model predictive control of a small-scale biomass furnace";
Applied Energy,
285
(2021),
285.
Zusätzliche Informationen
-
L. Böhler, G Görtler, J. Krail, M. Kozek:
"Carbon monoxide emission models for small-scale biomass combustion of wooden pellets";
Applied Energy,
254
(2019),
113668;
12 S.
Zusätzliche Informationen
-
L. Böhler, J. Krail, G Görtler, M. Kozek:
"Fuzzy model predictive control for small-scale biomass combustion furnaces";
Applied Energy,
276
(2020),
13 S.
Zusätzliche Informationen
-
L. Böhler, D. Ritzberger, C. Hametner, S. Jakubek:
"Constrained extended Kalman filter design and application for on-line state estimation of highorder polymer electrolyte membrane fuel cell systems";
International Journal of Hydrogen Energy,
46
(2021),
11 S.
Zusätzliche Informationen
-
M. Brandstetter, A. Schirrer, M. Miletic, S. Henein, M. Kozek, F. Kupzog:
"Hierarchical predictive load control in smart grids";
IEEE Transactions on Smart Grid,
PP
(2015),
99.
Zusätzliche Informationen
-
M. Brandstetter, A. Schirrer, M. Miletic, S. Henein, M. Kozek, F. Kupzog:
"Hierarchical Predictive Load Control in Smart Grids";
IEEE Transactions on Smart Grid,
8
(2017),
1;
S. 190
- 199.
Zusätzliche Informationen
-
A. Byagowi, P. Kopacek, J. Baltes:
"Teen Sized Humanoid Robot Archie";
International Journal Automation Austria IJAA,
18
(2010),
Sonderheft;
S. 60
- 70.
Zusätzliche Informationen
-
N. Chivarov, N. Shivarov, P. Kopacek:
"Mechatronics Educational Robots Robko PHOENIX";
International Journal Automation Austria IJAA,
17
(2009),
2;
S. 68
- 73.
Zusätzliche Informationen
-
F. Czwielong, S. Floss, M. Kaltenbacher, S. Becker:
"Influence of a micro-perforated duct absorber on sound emission and performance of axial fans";
Applied Acoustics,
174
(2020),
15 S.
Zusätzliche Informationen
-
J. G. De Oliveira Junior, V. Dhingra, C. Hametner:
"Feature Extraction, Ageing Modelling and Information Analysis of a Large-Scale Battery Ageing Experiment";
ENERGIES,
14
(2021),
17.
Zusätzliche Informationen
-
F. Degenhart, J. Edelmann, M. Plöchl:
"Application of tire sensors for an integrated approach to evaluate longitudinal tire characteristics for braking performance";
Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering,
235
(2021),
2-3;
S. 627
- 638.
-
Maxime Deregnaucourt, M. Stadlbauer, C. Hametner, S. Jakubek, H. Koegeler:
"Evolving model architecture for custom output range exploration";
Mathematical and Computer Modelling of Dynamical Systems,
21
(2015),
1;
S. 1
- 22.
Zusätzliche Informationen
-
S. Dezfouli, P. Kopacek, M. Daniali:
"Cost Oriented Humanoid Robot Archie";
International Journal Automation Austria IJAA,
19
(2011),
2;
S. 62
- 69.
Zusätzliche Informationen
-
N. Didcock, S. Jakubek, C. Hametner, N. Keuth:
"Data based modelling of driveability for internal combustion engines";
Engineering Optimization,
50
(2018),
10;
S. 1755
- 1771.
-
N. Didcock, S. Jakubek, H. Koegeler:
"Regularisation methods for neural network model averaging";
Engineering Applications of Artificial Intelligence,
Volume 41 Issue C
(2015),
S. 128
- 138.
Zusätzliche Informationen
-
M. Döllinger, M. Kaltenbacher:
"Preface: Recent Advances in Understanding the Human Phonatory Process";
Acta Acustica united with Acustica (eingeladen),
102
(2016),
S. 195
- 208.
-
M. Döllinger, S. Kniesburges, M. Kaltenbacher, M. Echternach:
"Aktuelle Methoden zur Modellierung des Stimmgebungsprozesses";
HNO (eingeladen),
1
(2016).
Zusätzliche Informationen
-
M. Döllinger, M. Kunduk, M. Kaltenbacher, S. Vondenhoff, A. Ziethe, U. Eysholdt, C. Bohr:
"Analysis of vocal fold function from acoustic data simultaneously recorded with high speed endoscopy";
Journal of Voice,
26
(2012),
6;
8 S.
-
F. Dohnal:
"Vibration suppression of self-excited oscillations by parametric inertia excitation";
Wiley - PAMM,
Vol 5
(2005),
1;
2 S.
-
F. Dohnal, H. Ecker, H. Springer:
"Enhanced damping of a cantilever beam by axial parametric excitation";
Archive of Applied Mechanics,
78
(2008),
12;
S. 935
- 947.
Zusätzliche Informationen
-
M. Drmota, M Scheidl, H. Troger, E. Weinmüller:
"On the Imperfection Sensitivity of Complete Spherical Shells";
Computational Mechanics,
2
(1987),
S. 63
- 74.
-
Z. P. Du, A. Kravos, C. Steindl, T. Katrasnik, S. Jakubek, C. Hametner:
"Physically Motivated Water Modeling in Control-Oriented Polymer Electrolyte Membrane Fuel Cell Stack Models";
ENERGIES (eingeladen),
14
(2021),
7693.
Zusätzliche Informationen
-
Z. P. Du, C. Steindl, S. Jakubek:
"Efficient two-step parametrization of a control-oriented zero-dimensional polymer electrolyte membrane fuel cell model based on measured stack data";
Processes (eingeladen),
9
(2021),
4;
S. 713.
Zusätzliche Informationen
-
C. Dullinger, W. Struckl, M. Kozek:
"A general approach for mixed-integer predictive control of HVAC systems using MILP";
Applied Thermal Engineering,
128
(2018),
128;
S. 1646
- 1659.
Zusätzliche Informationen
-
C. Dullinger, W. Struckl, M. Kozek:
"A modular thermal simulation tool for computing energy consumption of HVAC units in rail vehicles";
Applied Thermal Engineering,
78
(2015),
S. 616
- 629.
Zusätzliche Informationen
-
C. Dullinger, W. Struckl, M. Kozek:
"Holistic energy simulation and optimization tool for urban rail vehicles";
Energy Conversion and Management,
174
(2018),
174;
S. 101
- 111.
Zusätzliche Informationen
-
C. Dullinger, W. Struckl, M. Kozek:
"Simulation-based multi-objective system optimization of train traction systems";
Simulation Modelling Practice and Theory,
72
(2017),
72;
S. 104
- 117.
Zusätzliche Informationen
-
H. Ecker:
"Einsatz von mess- und versuchstechnischen Methoden zur Verkehrsunfallrekonstruktion";
Der Sachverständige,
31
(2007),
1;
S. 20
- 27.
-
H. Ecker:
"The Bouncing Ball Problem - Modelling And Simulation Aspects";
Simulation News Europe,
34
(2002),
S. 9
- 14.
-
H. Ecker, F. Breitenecker:
"Comparison of Simulation Software - Comparison C11 "SCARA Robot" Definition";
Simulation News Europe SNE,
22
(1998),
S. 30
- 32.
-
H. Ecker, F. Breitenecker:
"The MATHMOD YoYO - Simulation Challenge - a New Benchmark for Modelling and Simulation";
Simulation News Europe SNE,
16
(2005),
44/45;
- 60.
-
H. Ecker, T. Pumhössel:
"Vibration suppression and energy transfer by parametric excitation in drive systems";
Proceedings of the Institution of Mechanical Engineers Part C - Journal of Mechanical Engineering Science,
226
(2012),
8;
S. 2000
- 2014.
Zusätzliche Informationen
-
J. Edelmann, M. Gobbi, G. Mastinu, M. Plöchl, G. Previati:
"Friction Estimation at Tire-Ground Contact";
SAE International Journal of Commercial Vehicles,
8
(2015),
1;
S. 182
- 188.
-
J. Edelmann, M. Haudum, M. Plöchl:
"Coordination of guidance and stabilization tasks for bicycle rider modelling";
PAMM,
15
(2015),
S. 627
- 628.
-
J. Edelmann, M. Plöchl:
"Controllability of the powerslide motion of an automobile with different actuation inputs";
PAMM,
16
(2016),
S. 803
- 804.
-
J. Edelmann, M. Plöchl:
"Electronic Stability Control of a Narrow Tilting Vehicle";
SAE Int. J. of Materials and Manufacturing,
4
(2011),
1;
S. 1006
- 1013.
-
J. Edelmann, M. Plöchl:
"Handling characteristics and stability of the steady-state powerslide motion of an automobile";
Regular and Chaotic Dynamics (eingeladen),
14
(2009),
6;
S. 682
- 692.
-
J. Edelmann, M. Plöchl, P. Lugner:
"Modelling and analysis of the dynamics of a tilting three-wheeled vehicle";
Multibody System Dynamics,
26
(2011),
4;
S. 469
- 487.
-
J. Edelmann, M. Plöchl, W. Reinalter, W. Tieber:
"A passenger car driver model for higher lateral accelerations";
Vehicle System Dynamics,
45
(2007),
12;
S. 1117
- 1129.
-
S. Einsle, M. Beitelschmidt, P. Lugner:
"Charakterisierung des Reifenseitenkraftverhaltens für transiente Fahrmanöver";
Automobiltechnische Zeitschrift (ATZ),
06
(2012),
114;
S. 492
- 496.
-
S. Eisner, M. Bernardoni, M. Nelhiebel, M. Kaltenbacher:
"Finite-Element Analysis of Coupled Electro-Thermal Problems With Strong Scale Separation";
IEEE Transactions on Power Electronics,
32
(2017),
1;
S. 561
- 570.
-
S. Emrich, T. Kadiofsky, J. Vilsecker:
"Direct Modelling and Programming of ODE - and CA - Results for ARGESIM Benchmark C17 `SIR-Type Epidemic´ in Modelica/Dymola";
Simulation News Europe SNE,
Vol. 18
(2009),
no. 3-4;
S. 69
- 70.
-
S. Engleder:
"Time-optimal motion planning and control of an electrohydraulically actuated toggle mechanism";
Mechatronics,
17
(2007),
8;
S. 448
- 456.
Zusätzliche Informationen
-
A.N. Eraslan, E. Arslan:
"A computational study on the nonlinear hardening curved beam problem";
International Journal of Pure and Applied Mathematics,
43
(2008),
S. 129
- 143.
-
A.N. Eraslan, E. Arslan:
"A concise analytical treatment of elastic-plastic bending of a strain hardening curved beam";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik,
88
(2008),
8;
S. 600
- 616.
-
A.N. Eraslan, E. Arslan:
"Analytical and numerical solutions to a rotating FGM disk";
Journal of Multidisciplinary Engineering Science and Technology,
2
(2015),
10;
S. 2843
- 2850.
-
A.N. Eraslan, E. Arslan:
"Plane Strain Analytical Solutions to Rotating Partially Plastic Graded Hollow Shafts";
Turkish Journal of Engineering and Environmental Sciences,
31
(2007),
S. 273
- 288.
-
A.N. Eraslan, E. Arslan, W. Mack:
"The strain hardening rotating hallow shaft subject to a positive temperature gradient";
Acta Mechanica,
194
(2007),
S. 191
- 211.
-
A.N. Eraslan, W. Mack:
"A computational procedure for estimating residual stresses and secondary plastic flow limits in nonlinearly strain hardening rotating shafts";
Forschung im Ingenieurwesen,
69
(2005),
S. 65
- 75.
-
D. Erdogan, S. Jakubek, C. Mayr, C. Hametner:
"Combustion Engine Test Bed System Identification Under the Presence of Cyclic Disturbances";
IEEE Transactions on Industrial Electronics,
1
(2020).
Zusätzliche Informationen
-
D. Erdogan, S. Jakubek, C. Mayr, C. Hametner:
"Model Predictive Feedforward Control for High-Dynamic Speed Control of Combustion Engine Test Beds";
IEEE Open Journal of Industry Applications,
2
(2021),
S. 82
- 92.
Zusätzliche Informationen
-
N. Euler-Rolle, M. Fuhrmann, M. Reinwald, S. Jakubek:
"Longitudinal tunnel ventilation control. Part 1: Modelling and dynamic feedforward control";
Control Engineering Practice,
63
(2017),
S. 91
- 103.
Zusätzliche Informationen
-
N. Euler-Rolle, S. Jakubek, G. Offner:
"Model order reduction by projection applied to the universal Reynolds' equation";
Mathematical and Computer Modelling of Dynamical Systems,
20
(2014),
4;
S. 374
- 394.
Zusätzliche Informationen
-
N. Euler-Rolle, F. Krainer, S. Jakubek, C. Hametner:
"Automated synthesis of a local model network based nonlinear model predictive controller applied to the engine air path";
Control Engineering Practice,
110
(2021),
104768.
Zusätzliche Informationen
-
N. Euler-Rolle, C. Mayr, I. Skrjanc, S. Jakubek, G. Karer:
"Automated Vehicle Driveaway with a Manual Dry Clutch on Chassis Dynamometers: Efficient Identification and Decoupling Control";
ISA Transactions,
98
(2020),
S. 237
- 250.
Zusätzliche Informationen
-
N. Euler-Rolle, I. Skrjanc, C. Hametner, S. Jakubek:
"Automated Generation of Feedforward Control using Feedback Linearization of Local Model Networks";
Engineering Applications of Artificial Intelligence,
50
(2016),
S. 320
- 330.
Zusätzliche Informationen
-
M. Fallmann, Z. Chen, Z. Zhang, P.H. Mayrhofer, M. Bartosik:
"Mechanical properties and epitaxial growth of TiN/AlN superlattices";
Surface & Coatings Technology,
375
(2019),
S. 1
- 7.
Zusätzliche Informationen
-
M. Fallmann, A. Poks, M. Kozek:
"Hybrid model-based online estimation of air temperature in mobile small-scale cooling chambers";
Applied Thermal Engineering,
208
(2022),
118147.
Zusätzliche Informationen
-
G. Feichtinger, A. Steindl:
"DNS Curves in a Production/Inventory Model";
Journal of Optimization Theory and Applications,
128
(2006),
2;
S. 295
- 308.
Zusätzliche Informationen
-
A. Ferrara, C. Hametner:
"Impact of Energy Management Strategies on Hydrogen Consumption and Start-up/Shut-down Cycles in Fuel Cell-Ultracapacitor-Battery Vehicles";
IEEE Transactions on Vehicular Technology,
Nov. 2021
(2021),
12 S.
Zusätzliche Informationen
-
A. Ferrara, S. Jakubek, C. Hametner:
"Energy management of heavy-duty fuel cell vehicles in real-world driving scenarios: robust design of strategies to maximize the hydrogen economy and system lifetime";
Energy Conversion and Management,
Volume 232
(2021).
Zusätzliche Informationen
-
A Fichtinger, J. Edelmann, M. Plöchl, M. Höll:
"Aquaplaning Detection Using Effect-Based Methods: An Approach Based on a Minimal Set of Sensors, Electronic Stability Control, and Drive Torques";
IEEE Vehicular Technology Magazine,
16
(2021),
3;
S. 20
- 28.
-
S. Floss, F. Czwielong, S. Becker, M. Kaltenbacher:
"Micro-perforated panels for noise reduction";
Elektrotechnik & Informationstechnik,
2
(2021).
Zusätzliche Informationen
-
S. Floss, F. Czwielong, M. Kaltenbacher, S. Becker:
"Design of an in-duct micro-perforated panel absorber for axial fan noise attenuation";
Acta Acustica united with Acustica,
5
(2021),
24.
Zusätzliche Informationen
-
S. Floss, M. Kaltenbacher, G. Karlowatz:
"Application and simulation of Micro-Perforated Panels in HVAC Systems";
SAE International,
1
(2018),
S. 2018015141
- 2018015148.
Zusätzliche Informationen
-
G. Fuchs, V. Satek, V. Vopenka, J. Kunovsky, M. Kozek et al.:
"Application of the Modern Taylor Series Method to a multi-torsion chain";
Simulation Modelling Practice and Theory (eingeladen),
33
(2013),
S. 89
- 101.
Zusätzliche Informationen
-
G. Fuchs, A. Steindl, S. Jakubek:
"Local Jacobian based Galerkin Order Reduction for the Approximation of Large-Scale Nonlinear Dynamical Systems";
International Journal of Mathematical Models and Methods in Applied Sciences (eingeladen),
Volume 5
(2011),
Issue 3;
S. 567
- 576.
Zusätzliche Informationen
-
F. Fuhrmann, A. Schirrer, M. Kozek:
"Model-predictive energy management system for thermal batch production processes using online load prediction";
Computers & Chemical Engineering,
163
(2022).
Zusätzliche Informationen
-
M. Fuhrmann, N. Euler-Rolle, M. Killian, M. Reinwald, S. Jakubek:
"Longitudinal tunnel ventilation control. Part 2: Non-linear observation and disturbance rejection";
Control Engineering Practice,
63
(2017),
S. 44
- 56.
Zusätzliche Informationen
-
G. Galasso, M. Kaltenbacher, A. Tomaselli, D. Scarpa:
"A unified model to determine the energy partitioning between target and plasma in nanosecond laser ablation of silicon";
Journal of Applied Physics,
117
(2015),
12;
13 S.
Zusätzliche Informationen
-
M. Gföhler, T. Angeli, P. Lugner:
"Modeling of Artificially Activated Muscle and Application to FES Cycling";
Journal of Mechanics in Medicine and Biology,
4
(2004),
S. 1
- 16.
-
M. Gföhler, P. Lugner:
"Dynamic simulation of FES-cycling: influence of individual parameters.";
IEEE Transactions on Neural Systems and Rehabilitation Engineering TNSRE,
12
(2004),
S. 398
- 405.
-
M. Gillinger, K. Shaposhnikov, T. Knobloch, M. Kaltenbacher, U. Schmid, M. Schneider:
"Impact of layer and substrate properties on the surface acoustic wave velocity in scandium doped aluminum nitride based SAW devices on sapphire";
AIP Advances,
23
(2016),
108;
5 S.
-
M. Gillinger, K. Shaposhnikov, T. Knobloch, M. Schneider, M. Kaltenbacher, U. Schmid:
"Impact of layer and substrate properties on the surface acoustic wave velocity in scandium doped aluminum nitride based SAW devices on sapphire";
Applied Physics Letters,
108
(2016),
S. 231601-1
- 231601-4.
Zusätzliche Informationen
-
M. Gillinger, K. Shaposhnikov, T. Knobloch, M. Stöger-Pollach, W. Artner, K. Hradil, M. Schneider, M. Kaltenbacher, U. Schmid:
"Enhanced c-axis orientation of aluminum nitride thin films by plasma-based pre-conditioning of sapphire substrates for SAW applications";
Applied Surface Science,
435
(2018),
S. 432
- 437.
Zusätzliche Informationen
-
T. Götsch, L. Mayr, M. Stöger-Pollach, B. Klötzer, S. Penner:
"Preparation and characterization of epitaxially grown unsupported yttria-stabilized zirconia (YSZ) thin films";
Applied Surface Science,
331
(2015),
S. 427
- 436.
Zusätzliche Informationen
-
A.L. Gratzer, S. Thormann, A. Schirrer, S. Jakubek:
"String Stable and Collision-Safe Model Predictive Platoon Control";
angenommen für IEEE Transactions on Intelligent Transportation Systems
(2022),
16 S.
Zusätzliche Informationen
-
S. Grosswindhager, M. Kozek, A. Voigt, L. Haffner:
"Fuzzy Predictive Control of District Heating Network";
International Journal of Modelling, Identification and Control (eingeladen),
19
(2013),
2;
S. 161
- 170.
Zusätzliche Informationen
-
S. Grosswindhager, K Schulmeister, M. Kozek:
"Model Predictive Control for Lateral Position of Endless Metal Belts";
Solid State Phenomena (eingeladen),
2012
(2012),
S. 1
- 8.
Zusätzliche Informationen
-
C. Guio Perez, T. Pröll, J. Wassermann, H. Hofbauer:
"Design of an Inductance Measurement System for Determination of Particle Residence Time in a Dual Circulating Fluidized Bed Cold Flow Model";
Industrial & Engineering Chemistry Research,
52
(2013),
S. 10732
- 10740.
-
C. Hametner:
"Nonlinear Dynamic System Identification Using Local Model Architectures";
at - Automatisierungstechnik,
56
(2008),
3.
-
C. Hametner, L. Böhler, M. Kozek, J. Bartlechner, O. Ecker, Z. P. Du, R. Kölbl, M. Bergmann, T. Bachleitner-Hofmann, S. Jakubek:
"Intensive care unit occupancy predictions in the COVID-19 pandemic based on age-structured modelling and differential flatness";
Nonlinear Dynamics,
109
(2022),
S. 57
- 75.
Zusätzliche Informationen
-
C. Hametner, J. Edelmann, S. Jakubek, W. Mack:
"An advanced algorithm for partitioning and parameter estimation in local model networks and its application to vehicle vertical dynamics";
Acta Mechanica (eingeladen),
223
(2012),
8;
S. 1693
- 1706.
-
C. Hametner, S. Jakubek:
"Local Model Network Identification for Online Engine Modelling";
Information Sciences,
220
(2013),
S. 210
- 225.
Zusätzliche Informationen
-
C. Hametner, S. Jakubek:
"Nonlinear Identification with Local Model Networks Using GTLS Techniques and Equality Constraints";
IEEE Transactions On Neural Networks,
22
(2011),
9;
S. 1406
- 1418.
Zusätzliche Informationen
-
C. Hametner, S. Jakubek:
"State of charge estimation for Lithium Ion cells: Design of experiments, nonlinear identification and fuzzy observer design";
Journal of Power Sources,
238
(2013),
S. 413
- 421.
Zusätzliche Informationen
-
C. Hametner, S. Jakubek, W. Prochazka:
"Data-driven design of a cascaded observer for battery state of health estimation";
IEEE Transactions on Industry Applications (eingeladen),
54
(2018),
6;
S. 6258
- 6266.
-
C. Hametner, M. Kozek, L. Böhler, A. Wasserburger, Z. P. Du, R. Kölbl, M. Bergmann, T. Bachleitner-Hofmann, S. Jakubek:
"Estimation of exogenous drivers to predict COVID-19 pandemic using a method from nonlinear control theory";
Nonlinear Dynamics,
106
(2021),
S. 1111
- 1125.
Zusätzliche Informationen
-
C. Hametner, C. Mayr, S. Jakubek:
"Dynamic NOx emission modelling using local model networks";
International Journal of Engine Research,
15
(2014),
S. 928
- 933.
Zusätzliche Informationen
-
C. Hametner, C. Mayr, M. Kozek, S. Jakubek:
"PID controller design for nonlinear systems represented by discrete-time local model networks";
International Journal of Control,
86
(2013),
9;
S. 1453
- 1466.
Zusätzliche Informationen
-
C. Hametner, C. Mayr, M. Kozek, S. Jakubek:
"Stability analysis of data-driven local model networks";
Mathematical and Computer Modelling of Dynamical Systems,
20
(2014),
3;
S. 224
- 247.
Zusätzliche Informationen
-
C. Hametner, M. Nebel:
"Operating Regime Based Dynamic Engine Modelling";
Control Engineering Practice,
20
(2012),
4;
S. 397
- 407.
Zusätzliche Informationen
-
C. Hametner, M. Stadlbauer, Maxime Deregnaucourt, S. Jakubek:
"Incremental optimal process excitation for online system identification based on evolving local model networks";
Mathematical and Computer Modelling of Dynamical Systems,
19
(2013),
6;
S. 505
- 525.
Zusätzliche Informationen
-
C. Hametner, M. Stadlbauer, Maxime Deregnaucourt, S. Jakubek, T. Winsel:
"Optimal experiment design based on local model networks and multilayer perceptron networks";
Engineering Applications of Artificial Intelligence,
26
(2013),
S. 251
- 261.
Zusätzliche Informationen
-
M. Han:
"Mobile Mini-Robots for Space Application";
International Journal Automation Austria IJAA,
IJAA
(2005),
Heft 2, Jg. 13;
S. 32
- 36.
-
M. Han, P. Kopacek, B. Putz, M. Würzl:
"Mobile Mini Robot at IHRT";
Academic Journal of Manufacturing Engineering,
Volume 2
(2004),
Number 1;
S. 10
- 14.
-
E. Hansy-Staudigl, M. Krommer, Y. Vetyukov:
"Finite deformations of thin plates made of dielectric elastomers: Modeling, Numerics and Stability";
Journal of Intelligent Material Systems and Structures,
29
(2017),
17;
S. 3495
- 3513.
Zusätzliche Informationen
-
St. Hartl, A. Schulz, H. Sima, T. Koch, M. Kaltenbacher:
"A Static Burst Test for Composite Flywheel Rotors";
Applied Composite Materials,
23
(2016),
3;
S. 271
- 288.
-
M. Haskul, E. Arslan:
"Thermal stresses in a cylindrical panel with free ends";
PAMM,
14
(2014),
S. 233
- 234.
-
M. Haskul, E. Arslan, W. Mack:
"Radial heating of a thick-walled cylindrically curved FGM-panel";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik,
97
(2017),
3;
S. 309
- 321.
-
M. Haskul, E. Arslan, W. Mack:
"Thermally loaded thick-walled cylindrically curved aluminum/steel-FGM-panel";
PAMM,
16
(2016),
S. 185
- 186.
-
A. Hauck, M. Ertl, J. Schöberl, M. Kaltenbacher:
"Accurate magnetostatic simulation of step-lap joints in transformer cores using anisotropic higher order FEM";
COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering,
32
(2013),
5;
S. 1581
- 1595.
-
M. Haudum, J. Edelmann, M. Plöchl, M. Höll:
"Vehicle side-slip angle estimation on a banked and low-friction road";
Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering,
232
(2018),
12;
S. 1584
- 1596.
-
F. Hausberg, M. Plöchl, M. Rupp, P. Pfeffer, S. Hecker:
"Combination of map-based and adaptive feedforward control algorithms for active engine mounts";
Journal of Vibration and Control,
2016
(2016),
S. 1
- 16.
Zusätzliche Informationen
-
F. Hausberg, Chr. Scheiblegger, P. E. Pfeffer, M. Plöchl, S. Hecker, M. Rupp:
"Experimental and analytical study of secondary path variations in active engine mounts";
Journal of Sound and Vibration,
340
(2015),
S. 22
- 38.
-
Ph. Heinzl, P. Lugner, M. Plöchl:
"Stability Control of a Passenger Car by Combined Additional Steering and Unilateral Braking";
Vehicle System Dynamics,
37
(2002),
S. 221
- 233.
-
Ph. Heinzl, M. Plöchl, P. Lugner:
"Different actuation strategies for a yaw moment control of a passenger car";
Vehicle System Dynamics,
35
(2001),
S. 85
- 100.
-
Ph. Heinzl, M. Plöchl, P. Lugner:
"Regelung eines Gliederzuges unter Verwendung einer 3-gliedrigen kinematisch geschlossenen Schleife";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik,
81
(2001),
S. 271
- 272.
-
Ph. Heinzl, M. Plöchl, P. Lugner:
"Strategien zur Verbesserung der Fahrdynamik durch aktive Stelleingriffe an den Rädern";
PAMM,
2
(2003),
1.
-
Ph. Heinzl, M. Plöchl, W. Mack, P. Lugner:
"Closed-loop analysis of an articulated railcar train";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik,
80
(2000),
2;
S. 349
- 350.
-
S. Helm, M. Kozek, S. Jakubek:
"Combustion Torque Estimation and Misfire Detection for Calibration of Combustion Engines by Parametric Kalman Filtering";
IEEE Transactions on Industrial Electronics (eingeladen),
59
(2012),
11;
S. 4326
- 4337.
Zusätzliche Informationen
-
M. Hemedi, A. Schirrer, C. Westermayer, M. Kozek:
"Integrated Input-output Selection Strategy for Robust Control of Complex Parameter Depending Systems";
Journal of System Design and Dynamics (eingeladen),
5, Special Issue of Motion and Vibration Control 2010 I
(2011),
5;
S. 1106
- 1118.
Zusätzliche Informationen
-
T. Hinterdorfer, A. Schulz, H. Sima, J. Wassermann:
"Compensation of unbalance forces of a switched reluctance machine by separate control of phase currents";
Mechanical Engineering Journal,
2
(2015),
4.
-
R. Hofstädter, J. Amaya, M. Kozek:
"Energy Optimal Control of Thermal Comfort in Trams";
Applied Thermal Engineering,
143
(2018),
S. 812
- 821.
Zusätzliche Informationen
-
R. Hofstädter, T. Zero, C. Dullinger, G. Richter, M. Kozek:
"Heat Capacity and Heat Transfer Coefficient Estimation for a Dynamic Thermal Model of Rail Vehicles";
Mathematical and Computer Modelling of Dynamical Systems,
23
(2017),
5;
S. 439
- 452.
Zusätzliche Informationen
-
M.C.J. Hornikx, M. Kaltenbacher, S. Marburg:
"a platform for benchmark cases in computational acoustics";
Acta Acustica united with Acustica,
4
(2015),
101;
S. 811
- 820.
Zusätzliche Informationen
-
A. Hüppe, G. Cohen, S. Imperiale, M. Kaltenbacher:
"Construction and Analysis of an Adapted Spectral Finite ElementMethod to Convective Acoustic Equations";
Communications in Computational Physics,
20
(2016),
1;
22 S.
Zusätzliche Informationen
-
A. Hüppe, M. Kaltenbacher:
"Spectral finite elements for computational aeroacoustics using acoustic perturbation equation";
Journal of Computational Acoustics,
20
(2012),
2.
-
A. Hüppe, M. Kaltenbacher:
"Stable matched layer for the acoustic conservation equations in the time domain.";
Journal of Computational Acoustics,
20
(2012),
1.
-
A. Hula, F Fürnsinn, K Schwieger, P Saleh, M. Neumann, H. Ecker:
"Deriving a joint risk estimate from dynamic data collected at motorcycle rides";
Accident Analysis and Prevention,
159
(2021),
8 S.
Zusätzliche Informationen
-
A. Humer, M. Krommer:
"Modeling of piezoelectric materials by means of a multiplicative decomposition of the deformation gradient";
Mechanics of Advanced Materials and Structures,
22(1-2)
(2015),
S. 125
- 135.
Zusätzliche Informationen
-
H. Husstedt, U. Ausserlechner, M. Kaltenbacher:
"Array of 12 Coils to Measure the Position, Alignment, and Sensitivity of Magnetic Sensors over Temperature";
Journal of Applied Physics,
111
(2012),
7.
-
H. Husstedt, U. Ausserlechner, M. Kaltenbacher:
"In-situ Analysis of Deformation and Mechanical Stress of Packaged Silicon Dies with an Array of Hall Plates";
IEEE Sensors Journal,
11
(2011),
S. 2993
- 3000.
-
H. Husstedt, U. Ausserlechner, M. Kaltenbacher:
"Precise Alignment of a Magnetic Sensor in a Coordinate Measuring Machine";
IEEE Sensors Journal,
10
(2010),
5;
S. 984
- 990.
-
H. Husstedt, M. Kaltenbacher:
"Detailed Analysis of Permanent Magnets by means of Free Field Measurements";
Journal of Applied Physics,
115
(2014),
17.
Zusätzliche Informationen
-
H. Husstedt, M. Kaltenbacher:
"Using the redundancy of the magnetic field for magnetic scanning applications";
Journal of Applied Physics,
113
(2013),
17;
S. 173905-1
- 173905-7.
Zusätzliche Informationen
-
H Irschik, M. Krommer, M Nader, Y. Vetyukov, H. von Garssen:
"The equations of Lagrange for a continuous deformable body with rigid body degrees of freedom, written in a momentum based formulation";
Journal of Sound and Vibration,
335
(2015),
S. 269
- 285.
Zusätzliche Informationen
-
H Irschik, M. Krommer, K. Schlacher:
"Mechanics and Model-based Control of Advanced Engineering Systems";
Advances in Science and Technology,
83
(2012),
S. 85
- 94.
Zusätzliche Informationen
-
H Irschik, M. Krommer, Ch. Zehetner:
"A Generalized Body Force Analogy for the Dynamic Theory of Thermoelasticity";
Journal of Thermal Stresses,
35(1-3)
(2012),
S. 235
- 247.
-
H Irschik, M. Krommer, Ch. Zehetner:
"Displacement tracking of pre-deformed smart structures";
Smart Structures and Systems,
18(1)
(2016),
S. 139
- 154.
-
S. Jakubek, A. Fleck:
"Schätzung des inneren Drehmoments von Verbrennungsmotoren durch parameterbasierte Kalmanfilterung";
at - Automatisierungstechnik (eingeladen),
57
(2009),
8;
S. 395
- 402.
Zusätzliche Informationen
-
S. Jakubek, C. Hametner:
"Identification of Neurofuzzy Models Using GTLS Parameter Estimation";
IEEE Transactions on Systems, Man, and Cybernetics,
39
(2009),
5;
S. 1121
- 1133.
Zusätzliche Informationen
-
S. Jakubek, C. Hametner, N. Keuth:
"Total least squares in fuzzy system identification: An application to an industrial engine";
Engineering Applications of Artificial Intelligence,
21
(2008),
8;
S. 1277
- 1288.
Zusätzliche Informationen
-
S. Jakubek, C. Hametner, N. Keuth, A. Voigt:
"Neue Methoden für die dynamische Identifikation mit Neuro-Fuzzy Netzen";
Automatisierungstechnik (at),
10
(2006),
S. 486
- 494.
Zusätzliche Informationen
-
S. Jakubek, N. Keuth:
"A Local Neuro-Fuzzy Network for High-Dimensional Models and Optimisation";
Engineering Applications of Artificial Intelligence,
19
(2006),
S. 705
- 717.
Zusätzliche Informationen
-
S. Jakubek, N. Keuth:
"Optimierte Neuro-Fuzzy-Modelle für Auslegungsprozesse und Simulation im Automotive-Bereich";
Automatisierungstechnik (at),
53
(2005),
9;
S. 425
- 433.
Zusätzliche Informationen
-
S. Jakubek, N. Keuth, F Bamer:
"Ein erweitertes, adaptives Kraftstoffzuteilungskonzept für den Ottomotor (Extended Nonlinear-Adaptive Engine Fuel Supply Control for Spark Ignition Engines) ";
Automatisierungstechnik (at),
03
(2004),
S. 127
- 135.
Zusätzliche Informationen
-
S. Jakubek, E. Luchini, A. Oberhummer, F. Pfister:
"A model-based interfacing concept for accurate power hardware-in-the-loop systems";
Mathematical and Computer Modelling of Dynamical Systems,
Volume 22
(2016),
Issue 1;
S. 1
- 20.
Zusätzliche Informationen
-
S. Jakubek, A. Schirrer, G. Aschauer, C. Saliger:
"Keeping Contact at 300 km/h";
dSPACE Magazine,
1
(2016),
S. 26
- 31.
Zusätzliche Informationen
-
S. Jakubek, A. Schirrer, G. Aschauer, C. Saliger:
"Kontaktsport bei 300 km/h";
dSPACE Magazin (eingeladen),
1
(2016),
S. 26
- 31.
Zusätzliche Informationen
-
S. Jakubek, M Seyr, G. Novak:
"Autonomous Mobile Robot Proprioceptive Navigation and Predictive Trajectory Tracking";
International Journal of Control,
81
(2008),
6;
S. 989
- 1001.
Zusätzliche Informationen
-
S. Jakubek, T. Strasser:
"Artificial neural networks for fault detection in large-scale data acquisition systems";
Engineering Applications of Artificial Intelligence (eingeladen),
17
(2004),
3;
S. 233
- 248.
Zusätzliche Informationen
-
J. Jiang, E Goodyer, A. Sutor, S. Ruptisch, S. Zörner, M. Stingl, B. Schmidt:
"Devices and Methods on Analysis of Biomechanical Properties of Laryngeal Tissue and Substitute Materials";
Current Bioinformatics,
6
(2011),
3;
S. 344
- 361.
Zusätzliche Informationen
-
M. Jirout, W. Mack, P. Lugner:
"Non-smooth dynamics of a magnetic track brake";
Regular and Chaotic Dynamics (eingeladen),
14
(2009),
6;
S. 673
- 681.
-
J. Kager, J. Bartlehner, C. Herwig, S. Jakubek:
"Direct control of recombinant protein production rates in E. coli fed-batch processes by nonlinear feedback linearization";
Chemical Engineering Research and Design,
182
(2022),
S. 290
- 304.
-
B. Kaltenbacher, M. Kaltenbacher, I. Sim:
"A modied and stable version of a perfectly matched layer technique for the 3-d second order wave equation in time domain with an application to aeroacoustics";
Journal of Computational Physics,
235
(2013),
16 S.
-
M. Kaltenbacher, S. Becker, M. Döllinger:
"Die humane Stimmgebung";
Akustik Journal,
2
(2018),
02;
S. 7
- 15.
-
M. Kaltenbacher, S. Floss:
"Nonconforming Finite Elements Based on Nitsche-Type Mortaring for Inhomogeneous Wave Equation";
Journal of Computational Acoustics (eingeladen),
26
(2018),
3;
18 S.
Zusätzliche Informationen
-
M. Kaltenbacher, A. Hüppe:
"Finite -Elemente-Verfahren für mechatronische Systeme";
Elektrotechnik & Informationstechnik,
132
(2015),
8;
7 S.
Zusätzliche Informationen
-
M. Kaltenbacher, A. Hüppe, J. Grabinger, B. Wohlmuth:
"Modeling and Finite Element Formulation for Acoustic Problems Including Rotating Domains";
AIAA Journal (eingeladen),
54
(2016),
10 S.
-
M. Kaltenbacher, A. Hüppe, A. Reppenhagen, M. Tautz, S. Becker, W. Kuehnel:
"Computational Aeroacoustics for HVAC Systems Utilizing a Hybrid Approach";
SAE Interantional,
9
(2016),
3;
6 S.
Zusätzliche Informationen
-
M. Kaltenbacher, A. Hüppe, A. Reppenhagen, F. Zenger, S. Becker:
"Computational Aeroacoustics for Rotating Systems with Application to an Axial Fan";
AIAA Journal,
5
(2017),
8 S.
-
M. Kaltenbacher, B. Kaltenbacher, S. Gombots:
"Inverse Scheme for Acoustic Source Localization using Microphone Measurements and Finite Element Simulations";
Acta Acustica united with Acustica,
104
(2018),
104;
S. 647
- 656.
Zusätzliche Informationen
-
M. Kaltenbacher, S. Schoder:
"Computational Aeroacoustics Based on a Helmholtz-Hodge Decomposition";
SAE International,
10
(2018).
Zusätzliche Informationen
-
M. Kaltenbacher, A. Volk, M. Ertl:
"Anisotropic model for the numerical computation of magnetostriction in grain-oriented electrical steel sheets";
COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering,
32
(2013),
5;
S. 1620
- 1630.
Zusätzliche Informationen
-
M. Kaltenbacher, S. Zörner, A. Hüppe:
"On the importance of strong fluid-solid coupling with application to human phonation";
Progress in Computational Fluid Dynamics, An International Journal,
14
(2014),
1;
S. 2
- 13.
-
J. Kancsár, M. Kozek, S. Jakubek:
"Flatness-based feedforward control of polymer electrolyte membrane fuel cell gas conditioning system";
International Journal of Hydrogen Energy,
41
(2016),
39;
S. 17526
- 17538.
Zusätzliche Informationen
-
J. Kancsár, M. Striednig, D. Aldrian, A. Trattner, M. Klell, C. Kügele, S. Jakubek:
"A novel approach for dynamic gas conditioning for PEMFC stack testing";
International Journal of Hydrogen Energy,
42
(2017),
S. 28898
- 28909.
Zusätzliche Informationen
-
L. Kasper, D. Pernsteiner, M. Koller, A. Schirrer, S. Jakubek, R. Hofmann:
"Numerical studies on the influence of natural convection under inclination on optimal aluminium proportions and fin spacings in a rectangular aluminium finned latent-heat thermal energy storage";
Applied Thermal Engineering,
190
(2021).
-
J. Kemna, J. Edelmann, M. Plöchl:
"Influences on long-term behaviour of elastomer chassis bushings considering their geometric design and rubber compounds";
Polymer Testing,
65
(2018),
S. 69
- 77.
-
M. Killian, M. Kozek:
"Implementation of cooperative Fuzzy model predictive control for an energy-efficient office building";
Energy and Buildings,
158
(2018),
158;
S. 1404
- 1416.
Zusätzliche Informationen
-
M. Killian, M. Kozek:
"Ten questions concerning model predictive control for energy efficient buildings";
Building and Environment (eingeladen),
105
(2016),
105;
S. 403
- 412.
Zusätzliche Informationen
-
M. Killian, B. Mayer, M. Kozek:
"Cooperative Fuzzy Model Predictive Control for Heating and Cooling of Buildings";
Energy and Buildings,
112
(2016),
S. 130
- 140.
Zusätzliche Informationen
-
M. Killian, B. Mayer, M. Kozek:
"Effective Fuzzy Black-Box Modeling for Building Heating Dynamics";
Energy and Buildings,
96
(2015),
S. 175
- 186.
Zusätzliche Informationen
-
M. Killian, B. Mayer, A. Schirrer, M. Kozek:
"Cooperative Fuzzy Model Predictive Control";
IEEE Transactions on Fuzzy Systems,
24
(2016),
2;
S. 471
- 482.
Zusätzliche Informationen
-
M. Killian, B. Mayer, A. Schirrer, M. Kozek:
"Verteilte kooperative modellprädiktive Temperaturregelung für komplexe Gebäude";
e & i Elektronik und Informationstechnik (eingeladen),
132
(2015),
08;
S. 474
- 480.
Zusätzliche Informationen
-
M. Killian, M. Zauner, M. Kozek:
"Comprehensive smart home energy management system using mixed-integer quadratic-programming";
Applied Energy,
222
(2018),
S. 662
- 672.
Zusätzliche Informationen
-
F. Klinger, J. Nusime, J. Edelmann, M. Plöchl:
"Wobble of a racing bicycle with a rider hands on and hands off the handlebar";
Vehicle System Dynamics,
52
(2014),
S. 51
- 68.
-
T. Kniffka, H. Ecker:
"Parametererregte mikroelektromechanische Systeme (MEMS)";
e & i Elektrotechnik und Informationstechnik,
132
(2015),
8;
S. 456
- 461.
-
C. Kobetz, P. Lugner, R. Rutz:
"Modellbasierte Fahrdynamikanalyse";
Automobiltechnische Zeitschrift (ATZ),
11
(2004),
S. 1030
- 1037.
-
E. Kocbay, Y. Vetyukov:
"Stress resultant plasticity for plate bending in the context of roll forming of sheet metal";
International Journal for Numerical Methods in Engineering,
122
(2021),
18;
25 S.
Zusätzliche Informationen
-
H. Kock, S. Eisner, M. Kaltenbacher:
"Electrothermal Multiscale Modeling and Simulation Concepts for Power Electronics";
IEEE Transactions on Power Electronics,
99
(2015).
-
R. Kölbl, M. Kozek:
"A physiological model of human mobility: A global study";
Humanities and social sciences communications,
8
(2021),
256.
Zusätzliche Informationen
-
O. König, G. Gregorčič, S. Jakubek:
"Model predictive control of a DC-DC converter for battery emulation";
Control Engineering Practice,
21
(2013),
4;
S. 428
- 440.
Zusätzliche Informationen
-
O. König, C. Hametner, S. Jakubek, G. Prochart:
"Datengetriebene Batteriemodelle zur Emulation des Impedanzverhaltens von Traktionsbatterien";
e & i Elektronik und Informationstechnik (eingeladen),
132
(2015),
8;
S. 469
- 473.
Zusätzliche Informationen
-
O. König, C. Hametner, G. Prochart, S. Jakubek:
"Battery Emulation for Power-HIL Using Local Model Networks and Robust Impedance Control";
IEEE Transactions on Industrial Electronics,
61
(2014),
2;
S. 943
- 955.
Zusätzliche Informationen
-
R. Kollau, W. Mack, A. Falkner, Yenilmez:
"Effiziente Fahrzeugsimulation durch konsistente Komponentenmodellierung und -parametrierung";
Automobiltechnische Zeitschrift (ATZ),
114
(2012),
05;
S. 442
- 447.
-
B. Kopacek, P. Kopacek:
"End of Life Management of Industrial Robots";
Elektrotechnik & Informationstechnik,
130
(2013),
2;
S. 67
- 71.
Zusätzliche Informationen
-
P. Kopacek:
"1.Österreichisch-Kubanischer Automatisierungstag "Automation and Mechatronics"";
International Journal Automation Austria IJAA,
18
(2010),
1;
S. 87
- 90.
-
P. Kopacek:
"1.Österreichisch-Kubanischer Automatisierungstag "IT in Automation"";
International Journal Automation Austria IJAA,
18
(2010),
1;
S. 91
- 96.
-
P. Kopacek:
"50 Jahre Österreich und IFAC";
International Journal Automation Austria IJAA,
14
(2006),
1;
S. 44
- 47.
-
P. Kopacek:
"Advances in Robotics";
International Journal Automation Austria IJAA,
13
(2005),
Special Issue;
S. 1
- 12.
Zusätzliche Informationen
-
P. Kopacek:
"Autonomous Mobile Robots";
International Journal Automation Austria IJAA,
18
(2010),
Sonderheft;
S. 53
- 59.
Zusätzliche Informationen
-
P. Kopacek:
"Development Trends in robotics";
e&i,
130
(2013),
2;
S. 42
- 47.
Zusätzliche Informationen
-
P. Kopacek:
"Robotics in Austria";
International Journal Automation Austria IJAA,
17
(2009),
1;
S. 23
- 29.
Zusätzliche Informationen
-
P. Kopacek, B. Kopacek:
"Economy of Disassembly";
Elsevier ScienceDirect IFAC-PapersOnLine,
50
(2017),
1;
S. 5161
- 5165.
Zusätzliche Informationen
-
P. Kopacek, B. Kopacek:
"Intelligent, flexible disassembly";
The International Journal of Advanced Manufacturing Technology,
http://www.springerlink.com/
(2005),
7 S.
-
P. Kopacek, A. Shala, X. Bajrami, R. Likaj:
"Modeling and control of a humanoid robot";
e&i,
130
(2013),
2;
S. 61
- 66.
Zusätzliche Informationen
-
P. Kopacek, L. Stapleton, G. Dimirovski:
"From Swiss To Tecis And Beyond";
Elsevier ScienceDirect IFAC-PapersOnLine,
50
(2017),
1;
S. 6361
- 6366.
Zusätzliche Informationen
-
P. Kopacek, A. Weinmann:
"Automatisierungstechnik: ausgewählte Beiträge Österreichs";
E&I Elektrotechnik und Informationstechnik,
120
(2003),
5;
S. 140
- 142.
-
N. Koutná, P. Řehák, Z. Chen, M. Bartosik, M. Fallmann, M. Černý, Z. Zhang, M. Friak, M. Sob, P.H. Mayrhofer, D. Holec:
"Correlating structural and mechanical properties of AlN/TiN superlattice films";
Scripta Materialia,
165
(2019),
S. 159
- 163.
Zusätzliche Informationen
-
M. Kozek:
"RBF-Networks for Identification of Patient Pharmacokinetics and Pharmacodynamics";
Simulation News Europe,
SNE 3233
(2001),
S. 30.
-
M. Kozek, C. Benatzky:
"Ein maßstäbliches Experiment zur aktiven Schwingungsdämpfung eines Eisenbahn-Wagenkastens";
at - Automatisierungstechnik,
10
(2008),
56;
S. 504
- 512.
Zusätzliche Informationen
-
M. Kozek, C. Benatzky, A. Schirrer, A. Stribersky:
"Vibration Damping of a Flexible Car Body Structure Using Piezo Stack Actuators";
Control Engineering Practice (eingeladen),
19
(2009),
3;
S. 298
- 310.
Zusätzliche Informationen
-
M. Kozek, C. Bilik, C. Benatzky:
"A PC-based Flexible Solution for Virtual Instrumentation of a Multi-Purpose Test Bed";
International Journal of Online Engineering,
Vol.2, http://www.i-joe.org/ojs/index.php
(2006),
4;
5 S.
Zusätzliche Informationen
-
M. Kozek, B. Gross:
"Identification and Inversion of Magnetic Hysteresis for Sinusoidal Magnetization";
International Journal of Simulation Modelling,
http://www.ijoe.org
(2005),
1.
Zusätzliche Informationen
-
M. Kozek, C. Hametner:
"Block-oriented identification of Hammerstein/Wiener-models using the RLS-algorithm";
International Journal of Applied Electromagnetics and Mechanics,
25
(2007),
S. 529
- 535.
Zusätzliche Informationen
-
M. Kozek, A. Lorenz, P. Kampas:
"Modeling and control of an electric servo drive with strong restrictions in the control variable";
International Journal of Applied Electromagnetics and Mechanics,
25
(2007),
S. 521
- 527.
Zusätzliche Informationen
-
M. Kozek, S. Sinanovic:
"Identification of Wiener Models Using Optimal Local Linear Models";
Simulation Modelling Practice and Theory (eingeladen),
16
(2008),
8;
S. 1055
- 1066.
Zusätzliche Informationen
-
S. Kozek-Langenecker, P. Marhofer, C. Krenn, C. Glaser, M. Kozek, M. Semsroth:
"Simulation of an Epidural Test Dose with Intravenous lsoproterenol in Sevoflurane- and Halothane-Anesthetized Children";
Anesthesia and Analgesia,
87
(1998),
S. 549
- 552.
-
C. Kozlik, B. Geringer, A. Schirrer, S. Jakubek:
"Dynamic matrix control applied to emission control of a diesel engine";
International Journal of Engine Research,
17
(2016),
5;
S. 556
- 575.
Zusätzliche Informationen
-
A. Kravos, D. Ritzberger, C. Hametner, S. Jakubek, T. Katrasnik:
"Methodology for efficient parametrisation of electrochemical PEMFC model for virtual observers: Model based optimal design of experiments supported by parameter sensitivity analysis";
International Journal of Hydrogen Energy,
(*)
(2020),
(*);
S. ##
- (*).
Zusätzliche Informationen
-
A. Kravos, D. Ritzberger, G. Tavcar, C. Hametner, S. Jakubek, T. Katrasnik:
"Thermodynamically consistent reduced dimensionality electrochemical model for proton exchange membrane fuel cell performance modelling and control";
Journal of Power Sources,
454
(2020),
227930.
-
A. Kregar, P. Frühwirt, D. Ritzberger, S. Jakubek, T. Katrasnik, G. Gescheidt:
"Sensitivity Based Order Reduction of a Chemical Membrane Degradation Model for Low-Temperature Proton Exchange Membrane Fuel Cells";
ENERGIES,
13(21)
(2020),
5611;
S. ##.
Zusätzliche Informationen
-
M. Krommer, P. Berik, A. Benjeddou:
"Exact 3D Saint-Venant type solutions for piezoelectric d15 shear-mode bi-morph and sandwich torsion actuation and sensing problems";
Acta Mechanica,
224(11)
(2013),
S. 2505
- 2527.
-
M. Krommer, P. Berik, A. Benjeddou:
"Piezoelectric d15 shear-response-based torsion actuation mechanism: an exact 3D Saint-Venant type solution";
International Journal of Smart and Nano Materials,
3(2)
(2012),
S. 82
- 102.
-
M. Krommer, H Irschik:
"Design of Piezoelectric Sensors for Structural and Health Monitoring based on the Principle of Virtual Work";
Advanced Materials Research,
745
(2013),
S. 73
- 87.
Zusätzliche Informationen
-
M. Krommer, H Irschik:
"Post-Buckling of Piezoelectric Thin Plates";
International Journal of Structural Stability and Dynamics,
15(7)
(2015).
Zusätzliche Informationen
-
M. Krommer, S. Jakubek, M. Kaltenbacher, H. Schmiedmayer:
"Mechanik: Grundlage moderner mechatronischer Systeme";
ÖIAZ,
161
(2016),
1;
S. 181
- 187.
-
M. Krommer, M. Pieber, Y. Vetyukov:
"Modellierung, Simulation und Schwingungsreduktion dünner Schalen mit piezoelektrischen Wandlern";
Elektrotechnik & Informationstechnik,
132
(2015),
8;
S. 437
- 447.
Zusätzliche Informationen
-
M. Krommer, J. Schöftner:
"Single point vibration control for a passive piezoelectric Bernoulli-Euler beam subjected to spatially varying harmonic loads";
Acta Mechanica,
223(8)
(2012),
S. 1983
- 1998.
-
M. Krommer, Y. Vetyukov, E. Hansy-Staudigl:
"Nonlinear modelling and analysis of thin piezoelectric plates: Buckling and post-buckling behaviour";
Smart Structures and Systems,
18(1)
(2016),
S. 155
- 181.
Zusätzliche Informationen
-
M. Krommer, Ch. Zehetner:
"Mathematical analysis of piezoelectric sandwich torsion transducers based on the d36-effect";
Mechanics of Advanced Materials and Structures,
22(1-2)
(2015),
S. 19
- 32.
Zusätzliche Informationen
-
M. Krupa, A. Schagerl, A. Steindl, P. Szmolyan, H. Troger:
"Relative equilibria of tethered satellite systems and their stability for very stiff tethers";
Dynamical Systems,
16
(2001),
3;
S. 253
- 278.
-
T. Kuba, P. Lugner:
"Dynamic behaviour of tramways with different kinds of bogies";
Vehicle System Dynamics,
50
(2012),
S. 277
- 289.
-
T. Kuba, P. Lugner, M. Plöchl:
"Dynamik von Losrad- und Radsatzfahrwerk in Straßenbahnen";
Der Eisenbahningenieur,
04
(2012),
S. 18
- 23.
-
A. S. Kuleshov, E. S. Shalimova, A. Steindl:
"On Hopf bifurcation in the problem of motion of a heavy particle on a rotating sphere: the viscous friction case";
Acta Mechanica,
230
(2019),
S. 4049
- 4060.
Zusätzliche Informationen
-
R. Kumar, T. Strasser, G. Deconinck, C. Lai, L. Lai:
"Special Issue on Recent Advances for Intelligence in Power and Energy Systems";
IEEE Transactions on Systems, Man, and Cybernetics: Systems,
51
(2021),
4;
S. 2036
- 2040.
Zusätzliche Informationen
-
C. Lai, T. Strasser, L. Lai:
"Editorial to the Special Issue on Smart Cities Based on the Efforts of the Systems, Man, and Cybernetics Society";
IEEE Transactions on Systems, Man, and Cybernetics: Systems,
52
(2022),
1;
S. 2
- 6.
Zusätzliche Informationen
-
M. Lamprecht, E. Kocbay, M. Leonhartsberger, Y. Vetyukov, F. Bleicher:
"Nonlinearmechanicalmodel of the shaft of a roll forming mill and parameter identification";
The International Journal of Advanced Manufacturing Technology (eingeladen),
Jänner 2021
(2021),
S. 3363
- 3375.
Zusätzliche Informationen
-
R. Lernbeiss, M. Plöchl:
"Simulation model of an aircraft landing gear considering elastic properties of the shock absorber";
Proceedings of the Institution of Mechanical Engineers Part K - Journal of Multi-Body Dynamics (eingeladen),
221
(2007),
S. 77
- 86.
-
A. Lorenz, M. Kozek:
"Data based damage prediction of commercial vehicles using Bayesian Networks";
SAE International Journal of Commercial Vehicles,
1
(2009),
1;
S. 373
- 382.
Zusätzliche Informationen
-
E. Luchini, F. Kitanoski, M. Kozek:
"Multi-objective optimization of the operational modes for redundant refrigeration circuits";
Applied Thermal Engineering,
122
(2017),
S. 409
- 419.
Zusätzliche Informationen
-
E. Luchini, D. Radler, D. Ritzberger, S. Jakubek, M. Kozek:
"Model predictive temperature control and ageing estimation for an insulated cool box";
Applied Thermal Engineering,
144
(2018),
S. 269
- 277.
Zusätzliche Informationen
-
E. Luchini, A. Schirrer, S. Jakubek, M. Kozek:
"Model predictive multirate control for mixed-integer optimisation of redundant refrigeration circuits";
Journal of Process Control (eingeladen),
76
(2019),
S. 112
- 121.
Zusätzliche Informationen
-
P. Lugner, H. Pacejka, M. Plöchl:
"Recent advances in tyre models and testing procedures";
Vehicle System Dynamics (eingeladen),
43
(2005),
6-7;
S. 413
- 436.
-
P. Lugner, M. Plöchl:
"Additional 4WS and Driver Interaction";
Vehicle System Dynamics,
24
(1995),
8;
S. 639
- 658.
-
P. Lugner, M. Plöchl:
"Comparison of tire models and their application for vehicle system dynamics";
Tire Technology International (eingeladen),
13
(2009),
S. 40
- 44.
-
P. Lugner, M. Plöchl:
"Dynamic traction limitations of a passenger car with 4-wheel drive";
International Journal of Vehicle Design,
25
(2001),
3;
S. 189
- 197.
-
P. Lugner, M. Plöchl:
"Model behaviour";
Tire Technology International (eingeladen),
7
(2009),
S. 52
- 55.
-
P. Lugner, M. Plöchl:
"Modelling in vehicle dynamics of automobiles";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik (eingeladen),
84
(2004),
4;
S. 219
- 236.
-
P. Lugner, M. Plöchl:
"Tyre model performance test: first experiences and results";
International Journal of Vehicle System Dynamics (Supplement),
43
(2005),
S. 48
- 62.
-
W. Mack, J. Edelmann, A. Falkner:
"Drift-Effekte in der nabenkrafterregten Kraftfahrzeugsimulation";
Elektrotechnik & Informationstechnik,
132
(2015),
8;
S. 462
- 468.
-
W. Mack, M. Plöchl:
"Instationäre Waermebelastung eines rotierenden elastisch-plastischen Querpressverbandes";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik,
79
(1999),
S. 465
- 466.
-
W. Mack, M. Plöchl:
"Transient heating of a rotating elastic-plastic shrink fit";
International Journal of Engineering Science,
38
(2000),
8;
S. 921
- 938.
-
W. Mack, M. Plöchl, U. Gamer:
"Auswirkungen eines Temperaturzyklus auf einen rotierenden elastisch-plastischen Querpressverband mit vollem Einschluß";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik,
81
(2001),
S. 351
- 352.
-
W. Mack, M. Plöchl, U. Gamer:
"Effects of a Temperature Cycle on an Elastic-Plastic Shrink Fit with Solid Inclusion";
Journal of Mechanics (eingeladen),
16
(2000),
1;
S. 23
- 30.
-
C. Maier, A. Schirrer, M. Kozek:
"Real-time capable nonlinear pantograph models using local model networks in state-space configuration";
Mechatronics (eingeladen),
50
(2018),
S. 292
- 302.
Zusätzliche Informationen
-
C. Maier, S. Schröders, W. Ebner, M. Köster, A. Fidlin, C. Hametner:
"Modeling and nonlinear parameter identification for hydraulic servo-systems with switching properties";
Mechatronics,
61
(2019),
S. 83
- 95.
-
K. Makihara, H. Ecker, F. Dohnal:
"Stability Analysis of Open-loop Stiffness Control to Suppress Self-excited Vibrations";
Journal of Vibration and Control,
11
(2005),
S. 643
- 669.
-
B. Mayer, M. Killian, M. Kozek:
"A branch and bound approach for building cooling supply control with hybrid model predictive control";
Energy and Buildings,
128
(2016),
S. 553
- 566.
Zusätzliche Informationen
-
B. Mayer, M. Killian, M. Kozek:
"Hierarchical model predictive control for sustainable building automation";
Sustainability (eingeladen),
9
(2017),
2;
S. 1
- 20.
Zusätzliche Informationen
-
B. Mayer, M. Killian, M. Kozek:
"Management of hybrid energy supply systems in buildings using mixed-integer model predictive control";
Energy Conversion and Management,
98
(2015),
S. 470
- 483.
Zusätzliche Informationen
-
M. Mayerhofer, W. Lepuschitz, T. Hoebert, M. Merdan, M. Schwentenwein, T. Strasser:
"Knowledge-Driven Manufacturability Analysis for Additive Manufacturing";
IEEE Open Journal of the Industrial Electronics Society,
2
(2021),
S. 207
- 223.
Zusätzliche Informationen
-
C. Mayr, N. Euler-Rolle, M. Kozek, C. Hametner, S. Jakubek:
"Engine Control Unit PID Controller Calibration by means of Local Model Networks";
Control Engineering Practice,
33
(2014),
S. 125
- 135.
Zusätzliche Informationen
-
J. Metzger, M. Kaltenbacher:
"Simultaneous Calibration Method for a 3D Particle Velocity Sensor";
Acta Acustica united with Acustica,
103
(2017),
2;
S. 252
- 261.
Zusätzliche Informationen
-
M. Mitsch, W. Mack, A. Falkner:
"On the scattering of test data and the significance of the standard coefficients "dynamic stiffness" and "loss angle" for hydraulic engine mounts";
Vehicle System Dynamics,
48
(2010),
3;
S. 387
- 403.
-
S. Münsterjohann, J. Grabinger, S. Becker, M. Kaltenbacher:
"CAA of an Air-Cooling System for Electronic Devices";
Advances in Acoustics and Vibration,
2016
(2016),
S. 1
- 17.
-
D. Murschenhofer, D. Kuzdas, S. Braun, S. Jakubek:
"A real-time capable quasi-2D proton exchange membrane fuel cell model";
Energy Conversion and Management,
162
(2018),
S. 159
- 175.
Zusätzliche Informationen
-
R. Nabergoj, A. Tondl, H. Ecker:
"Additional Contribution to the Problem of Self-Excited Systems having Several Unstable Vibration Modes";
Engineering Mechanics,
14
(2007),
1/2;
S. 117
- 128.
Zusätzliche Informationen
-
Q. Nguyen, A. Oueslati, A. Steindl, A. Teufel, H. Troger:
"Travelling interface waves in a brake-like system under unilateral contact and Coulomb friction";
Comptes Rendus Mecanique,
336
(2008),
S. 203
- 209.
Zusätzliche Informationen
-
M. Nierla, M. Loeffler, M. Kaltenbacher, S. Rupitsch:
"Comparison of different vector Preisach models for the simulation of ferromagnetic materials";
COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering,
38
(2019),
5;
S. 1696
- 1710.
Zusätzliche Informationen
-
M. Nierla, A. Sutor, S. Ruptisch, M. Kaltenbacher:
"Stageless evaluation for a vector Preisach model based on rotational operators";
COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering (eingeladen),
36
(2017),
5;
S. 1501
- 1516.
-
E. Oborin, Y. Vetyukov:
"Steady state motion of a shear deformable beam in contact with a traveling surface";
Acta Mechanica,
230
(2019),
S. 4021
- 4033.
Zusätzliche Informationen
-
E. Oborin, Y. Vetyukov, I. Steinbrecher:
"Eulerian description of non-stationary motion of an idealized belt-pulley system with dry friction";
International Journal of Solids and Structures,
147
(2018),
S. 40
- 51.
Zusätzliche Informationen
-
A. Pajaziti, Sh. Buza, I. Gojani, R. Safaric, P. Kopacek:
"Cost Oriented Robots for Kosovo";
International Journal Automation Austria IJAA,
17
(2009),
2;
S. 58
- 67.
Zusätzliche Informationen
-
D. Perchtold, H. Husstedt, M. Kaltenbacher:
"A Method for Parameter Identification of Thin Permanent Magnets at Higher Frequency and Temperature Ranges";
IEEE Transactions on Magnetics,
51
(2015),
10.
-
D. Pernsteiner, V. Halmschlager, A. Schirrer, R. Hofmann, S. Jakubek:
"Efficient sensitivity-based cooperation concept for hierarchical multi-layer process automation of steam-powered plants";
IEEE Access,
10
(2022),
S. 66844
- 66861.
Zusätzliche Informationen
-
D. Pernsteiner, L. Kasper, A. Schirrer, R. Hofmann, S. Jakubek:
"Co-simulation methodology of a hybrid latent-heat thermal energy storage unit";
Applied Thermal Engineering,
178
(2020).
Zusätzliche Informationen
-
D. Pernsteiner, A. Schirrer, L. Kasper, R. Hofmann, S. Jakubek:
"Data-based model reduction for phase change problems with convective heat transfer";
Applied Thermal Engineering,
184
(2021),
116228.
Zusätzliche Informationen
-
D. Pernsteiner, A. Schirrer, L. Kasper, R. Hofmann, S. Jakubek:
"State estimation concept for a nonlinear melting/solidification problem of a latent heat thermal energy storage";
Computers & Chemical Engineering,
153
(2021),
S. 107444.
Zusätzliche Informationen
-
Ch. Pittner, R. Schmid, K.-O. Endlicher:
"Belastungen des Schienenquerschnitts im Gleisbogen auf Basis von Felddaten";
ETR Eisenbahntechnische Rundschau,
9
(2019),
S. 68
- 73.
-
M. Plöchl, J. Edelmann:
"Driver models in automobile dynamics application";
Vehicle System Dynamics (eingeladen),
45
(2007),
7-8;
S. 699
- 741.
-
M. Plöchl, J. Edelmann, B. Angrosch, Chr. Ott:
"On the wobble mode of a bicycle";
Vehicle System Dynamics (eingeladen),
50
(2012),
3;
S. 415
- 429.
-
M. Plöchl, Ph. Heinzl, W. Mack, P. Lugner:
"Dynamic analysis of an articulated interurban train by means of a symbolic-numerical method for closed-loop mechanisms";
Proceedings of the Institution of Mechanical Engineers Part K - Journal of Multi-Body Dynamics,
214
(2000),
243;
S. 243
- 252.
-
M. Plöchl, P. Lugner:
"A 3-level driver model and its application to driving simulations";
Vehicle System Dynamics,
33
(1999),
S. 71
- 82.
-
M. Plöchl, P. Lugner:
"Braking behaviour of a 4-wheel-steered automobile with an antilock braking system";
Vehicle System Dynamics,
25
(1996),
S. 547
- 558.
-
M. Plöchl, P. Lugner:
"Intersegmentäre Knickwinkelsteuerung bei Gliederzügen";
ZEV + DET; Glasers Annalen,
122
(1998),
S. 635
- 642.
-
M. Plöchl, P. Lugner:
"Passenger car and passenger car-trailer - different tasks for the driver";
JSAE Review (eingeladen),
20
(1999),
S. 543
- 548.
-
M. Plöchl, P. Lugner, A. Riepl:
"Improvements of passenger car-trailer behaviour by a trailer based control system";
Vehicle System Dynamics,
28
(1998),
S. 438
- 450.
-
S. Popprath, H. Ecker:
"Nonlinear dynamics of a rotor contacting an elastically suspended stator";
Journal of Sound and Vibration,
308
(2007),
S. 767
- 784.
Zusätzliche Informationen
-
R. Priesner, S. Jakubek:
"Mechanical Impedance Control of Rotatory Test Beds";
IEEE Transactions on Industrial Electronics,
61
(2014),
11;
S. 6264
- 6274.
Zusätzliche Informationen
-
N. Pugno, M. Schwarzbart, A. Steindl, H. Troger:
"On the stability of the track of the space elevator";
Acta Astronautica,
64
(2009),
5-6;
S. 524
- 537.
Zusätzliche Informationen
-
T. Pumhössel, B. Hopfner, H. Ecker:
"Enhanced Utilization of Structural Damping of Rotating Machines Using Impulsively Shaped Torsional Moments";
Technische Mechanik,
37
(2017),
2-5;
S. 208
- 217.
Zusätzliche Informationen
-
F. G. Rammerstorfer, S. Bauer, J. Scheidl:
"Analytical modelling of autofrettage processes - Historical approaches and new results";
PAMM,
18
(2018),
e201800119;
2 S.
-
Bharat Rao, F. Kupzog, M. Kozek:
"Phase Balancing Home Energy Management System Using Model Predictive Control";
ENERGIES,
11
(2018),
3323.
Zusätzliche Informationen
-
Bharat Rao, F. Kupzog, M. Kozek:
"Three Phase Unbalanced Optimal Power Flow using Holomorphic Embedding Load Flow Method";
Sustainability,
11
(2019),
6.
Zusätzliche Informationen
-
Bharat Rao, M. Stefan, T. Brunnhofer, R. Schwalbe, R. Karl, F. Kupzog, G. Taljan, F. Zeilinger, P. Stern, M. Kozek:
"Optimal capacity management applied to a low voltage distribution grid in a local peer-to-peer energy community";
International Journal Of Electrical Power & Energy Systems,
134
(2022),
107355.
Zusätzliche Informationen
-
Bharat Rao, M. Stefan, R. Schwalbe, R. Karl, F. Kupzog, M. Kozek:
"Stratified Control Applied to a Three-Phase Unbalanced Low Voltage Distribution Grid in a Local Peer-to-Peer Energy Community";
ENERGIES,
14
(2021),
3290;
19 S.
Zusätzliche Informationen
-
G. Rega, H. Troger:
"Dimension Reduction of Dynamical Systems: Methods, Models, Applications";
Nonlinear Dynamics,
41
(2005),
1-3;
S. 1
- 15.
Zusätzliche Informationen
-
O. Rekova, N. Pelzmann, P. Mandl, H. Ecker, A. Körner, M. Bicher, F. Breitenecker:
"ARGESIM Benchmark C11 ´SCARA Robot´: Comparison of Basic Implementations in EXCEL and MATLAB";
Simulation Notes Europe,
29
(2019),
3;
S. 149
- 158.
Zusätzliche Informationen
-
D. Ritzberger, C. Hametner, S. Jakubek:
"A Real-Time Dynamic Fuel Cell System Simulation for Model-Based Diagnostics and Control: Validation on Real Driving Data";
ENERGIES,
13(12)
(2020),
3148;
S. ##.
Zusätzliche Informationen
-
D. Ritzberger, J. Höflinger, Z. P. Du, C. Hametner, S. Jakubek:
"Data-Driven Parameterization of Polymer Electrolyte Membrane Fuel Cell Models via Simultaneous Local Linear Structured State Space Identification";
International Journal of Hydrogen Energy,
46
(2021),
21;
S. 11878
- 11893.
Zusätzliche Informationen
-
D. Ritzberger, S. Jakubek:
"Nonlinear data-driven identification of polymer electrolyte membrane fuel cells for diagnostic purposes: A Volterra series approach";
Journal of Power Sources,
361
(2017),
S. 144
- 152.
Zusätzliche Informationen
-
D. Ritzberger, A. Schirrer, S. Jakubek:
"Absorbing boundary layer control for linear one-dimensional wave propagation problems";
Journal of Vibration and Control,
(2016).
Zusätzliche Informationen
-
D. Ritzberger, M. Striednig, Christoph Simon, C. Hametner, S. Jakubek:
"Online estimation of the electrochemical impedance of polymer electrolyte membrane fuel cells using broad-band current excitation";
Journal of Power Sources,
405
(2018),
S. 150
- 161.
Zusätzliche Informationen
-
K. Roppert, S. Schoder, M. Kaltenbacher, F. Toth:
"Non-conforming Finite Elements";
International Compumag Society Newsletter (eingeladen),
25
(2018),
3;
S. 4
- 18.
Zusätzliche Informationen
-
K. Roppert, S. Schoder, F. Toth, M. Kaltenbacher:
"Non-Conforming Nitsche Interfaces for Edge Elements in curl-curl Type Problems";
IEEE Transactions on Magnetics,
-
(2020),
S. 1
- 7.
-
K. Roppert, F. Toth, M. Kaltenbacher:
"Modelling Nonlinear Steady State Induction Heating Processes";
IEEE Transactions on Magnetics,
1
(2020),
1.
Zusätzliche Informationen
-
K. Roppert, F. Toth, M. Kaltenbacher:
"Simulation of Sheet Metal Induction Heating Processes with Harmonic Balance FEM";
COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering,
1
(2019).
Zusätzliche Informationen
-
H. Rossmanith:
"The Use of Lagrange Diagrams in Precise Initiation Blasting. Part 1: Two Interacting Blastholes";
The International Journal for Blasting and Fragmentation,
6
(2002),
1;
S. 104
- 136.
-
H. Rossmanith, K. Uenishi:
"Education in Blasting Engineering : One Dimensional Block Model for Bench Blasting (Part 2)";
The International Journal for Blasting and Fragmentation,
6
(2002),
1;
S. 36
- 67.
-
H. Rossmanith, K. Uenishi:
"The mechanics of spall fracture in rock and concrete";
Fragblast - The International Journal for Blasting and Fragmentation,
10
(2006),
3-4;
S. 111
- 162.
-
Hp Rossmanith, K. Uenishi:
"On size and boundary effects in scaled model blasts - Fractures and fragmentation patterns";
Fragblast - The International Journal for Blasting and Fragmentation,
10
(2006),
3-4;
S. 163
- 211.
-
H. Sadeghi, M. Döllinger, M. Kaltenbacher, S. Kniesburges:
"Aerodynamic impact of the ventricular folds in computational larynx models";
Journal of the Acoustical Society of America,
145
(2019),
S. 2376
- 2387.
Zusätzliche Informationen
-
H. Sadeghi, S. Kniesburges, S. Falk, M. Kaltenbacher, A. Schützenberger, M. Döllinger:
"Towards a Clinically Applicable Computational Larynx Model";
Applied Sciences,
9
(2019),
S. 1
- 19.
Zusätzliche Informationen
-
H. Sadeghi, S. Kniesburges, M. Kaltenbacher, A. Schützenberger, M. Döllinger:
"Computational Models of Laryngeal Aerodynamics: Potentials and Numerical Costs";
Journal of Voice,
1
(2018).
Zusätzliche Informationen
-
M. Schagerl, A. Berger:
"Propagation of Small Waves in Inextensible Strings";
Wave Motion,
35
(2002),
S. 339
- 353.
-
G. Schandl, P. Lugner, C. Benatzky, M. Kozek, A. Stribersky:
"Comfort enhancement by an active vibration reduction system for a flexible railway car body";
Vehicle System Dynamics,
45
(2007),
9;
S. 835
- 847.
Zusätzliche Informationen
-
J. Scheidl:
"Motion of a friction belt drive at mixed kinematic description";
International Journal of Solids and Structures,
200-201
(2020),
S. 158
- 169.
Zusätzliche Informationen
-
J. Scheidl, Y. Vetyukov:
"Steady Motion of a Slack Belt Drive: Dynamics of a Beam in Frictional Contact With Rotating Pulleys";
Journal of Applied Mechanics - Transactions of the ASME,
87
(2020),
S. 1
- 12.
Zusätzliche Informationen
-
J. Scheidl, Y. Vetyukov, C. Schmidrathner, K Schulmeister, M. Proschek:
"Mixed Eulerian-Lagrangian shell model for lateral run-off in a steel belt drive and its experimental validation";
International Journal of Mechanical Sciences,
204
(2021),
S. 1
- 18.
Zusätzliche Informationen
-
A. Schiftner, F. Breitenecker, H. Ecker:
"'Crane and Embedded Control' - Definition of an ARGESIM Benchmark with Implicit Modelling, Digital Control and Sensor Action";
Simulation News Europe,
16
(2006),
1;
S. 27
- 29.
-
A. Schiftner, F. Breitenecker, H. Ecker:
"Crane with Complex Embedded Control - ARGESIM Benchmark C13R with Implicit Modelling, Digital Control and Sensor Action";
Simulation News Europe SNE,
17
(2007),
1;
S. 49
- 52.
Zusätzliche Informationen
-
A. Schirrer, G. Aschauer, M. Kozek, S. Jakubek:
"Power-HIL-Emulation der Dynamik einer Zug-Oberleitung mittels Echtzeit-Finite-Elemente-Modell in bewegten Koordinaten und modellprädiktiver Regelung";
at - Automatisierungstechnik (eingeladen),
68
(2020),
8;
S. 641
- 653.
Zusätzliche Informationen
-
A. Schirrer, G. Aschauer, E. Talic, M. Kozek, S. Jakubek:
"Catenary emulation for hardware-in-the-loop pantograph testing with a model predictive energy-conserving control algorithm";
Mechatronics,
41
(2017),
S. 17
- 28.
Zusätzliche Informationen
-
A. Schirrer, M. Brandstetter, I. Leobner, S. Hauer, M. Kozek:
"Nonlinear model predictive control for a heating and cooling system of a low-energy office building";
Energy and Buildings,
125
(2016),
S. 86
- 98.
Zusätzliche Informationen
-
A. Schirrer, E. Talic, G. Aschauer, M. Kozek, S. Jakubek:
"Optimization based determination of highly absorbing boundary conditions for linear finite difference schemes";
Journal of Sound and Vibration,
365
(2016),
S. 45
- 69.
Zusätzliche Informationen
-
A. Schirrer, C. Westermayer, M. Hemedi, M. Kozek:
"Actuator and Sensor Positioning Optimization in Control Design for a Large BWB Passenger Aircraft";
ISRN Mechanical Engineering (eingeladen),
2011
(2011),
Article ID 635815;
11 S.
Zusätzliche Informationen
-
C. Schmidrathner:
"Buckling of a clamped strip-like beam with a linear pre-stress distribution";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik,
100
(2020),
7;
S. 1
- 13.
Zusätzliche Informationen
-
C. Schmidrathner, Y. Vetyukov, J. Scheidl:
"Non-material finite element rod model for the lateral run-off in a two-pulley belt drive";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik,
n/a
(2021),
S. 1
- 17.
Zusätzliche Informationen
-
E. Schmidt, M. Kaltenbacher, A. Wolfschluckner:
"Eddy current losses in permanent magnets of surface mounted permanent magnet synchronous machines-Analytical calculation and high order finite element analyses";
Eletrotechnik & Informationstechnik,
134
(2017),
2;
S. 148
- 155.
-
E. Schmidt, W. Paradeiser, F. Dohnal, H. Ecker:
"Design of an electromagnetic actuator for parametric stiffness excitation";
COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering,
26
(2007),
3;
S. 800
- 813.
Zusätzliche Informationen
-
H. Schmiedmayer, M. Weigel:
"Adams - Ein Simulationspaket für Mehrkörpersysteme";
ZIDline, Informationen des zentralen Informatikdienstes der TU Wien,
10
(2004),
S. 20
- 22.
-
M. Schneider, M. Dorfmeister, Ph. Moll, M. Kaltenbacher, U. Schmid:
"Bi-Stable Aluminum Nitride-Based Piezoelectric Micromachined Ultrasonic Transducer (PMUT)";
Journal Of Microelectromechanical Systems,
29
(2020),
S. 948
- 953.
Zusätzliche Informationen
-
S. Schoder, M. Kaltenbacher:
"Hybrid Aeroacoustic Computations: State of Art and New Achievements";
Journal of Theoretical and Computational Acoustics,
27
(2020),
4;
S. 1
- 33.
-
S. Schoder, K. Roppert, M. Kaltenbacher:
"Post-processing of direct aeroacoustic simulations using Helmholtz´s Decomposition";
AIAA Journal,
-
(2020).
-
S. Schoder, K. Roppert, M. Weitz, C. Junger, M. Kaltenbacher:
"Aeroacoustic source term computation based on radial basis functions";
International Journal for Numerical Methods in Engineering,
121
(2020),
S. 2051
- 2067.
Zusätzliche Informationen
-
S. Schoder, F. Toth, C. Freidhager, M. Kaltenbacher:
"Revisiting infinite mapping layer for open domain problems";
Journal of Computational Physics,
392
(2019),
S. 354
- 367.
Zusätzliche Informationen
-
S. Schoder, M. Weitz, P. Maurerlehner, A. Hauser, S. Falk, S. Kniesburges, M. Döllinger, M. Kaltenbacher:
"Hybrid aeroacoustic approach for the efficient numerical simulation of human phonation";
Journal of the Acoustical Society of America,
147
(2020),
2;
S. 1179
- 1194.
-
S. Schröders, C. Maier, W. Ebner, A. Fidlin, C. Hametner:
"Two-degree-of-freedom MIMO control for hydraulic servo-systems with switching properties";
Control Engineering Practice,
95
(2020),
S. 104246.
-
K Schulmeister, M. Kozek:
"Modelling of Lateral Dynamics for an Endless Metal Process Belt";
Mathematical and Computer Modelling of Dynamical Systems (eingeladen),
iFirst
(2012).
Zusätzliche Informationen
-
A. Schulz, S. Hartl, H. Sima, T. Hinterdorfer, J. Wassermann:
"Innovative Schwungradspeicher mit hoher Energieeffizienz und Zuverlässigkeit";
e&i Elektrotechnik und Informationstechnik,
132
(2015),
8;
S. 481
- 490.
-
A. Schuster, M. Kozek, B. Voglauer, A. Voigt:
"Grey-Box Modelling of a Viscose-Fibre Drying Process";
Mathematical and Computer Modelling of Dynamical Systems (eingeladen),
18
(2012),
3;
S. 307
- 325.
Zusätzliche Informationen
-
M. Schwarzbart, A. Steindl, W Steiner, H. Troger, G. Wiedermann:
"Tethered satellite systems: A challenge for mechanics and applied mathematics";
GAMM Mitteilungen,
32
(2009),
1;
S. 105
- 120.
Zusätzliche Informationen
-
A. Seidl, A. Steindl, G. Feichtinger:
"Degenerated Hopf Bifurcations in a Demographic Diffusion Model";
Grazer Mathematische Berichte (eingeladen),
363
(2015),
S. 40
- 55.
-
I. Shevchenko, M. Kaltenbacher, B. Wohlmuth:
"A multi-time stepping integration method for the ultrasonic heating problem";
ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik,
92
(2012),
11-12;
S. 861
- 881.
-
I. Shevchenko, M. Kaltenbacher, B. Wohlmuth:
"Absorbing Boundary Conditions For A Wave Equation With A Temperature-Dependent Speed Of Sound";
Journal of Computational Acoustics,
Absorbing Boundary Conditions For A Wave Equation With A Temperature-Dependent Speed Of Sound
(2012),
21;
S. #.
-
P. Sidlof, S. Zörner, A. Hüppe:
"A hybrid approach to the computational aeroacoustics of human voice production";
Biomechanics and Modeling in Mechanobiology,
14
(2014),
3;
S. 473
- 488.
Zusätzliche Informationen
-
H. Silm, M. Kaltenbacher, J. Schöberl, M. Schöbinger, K. Hollaus:
"Multiscale finite element methods for eddy current problems in laminated iron MSFEM4ECP";
International Compumag Society Newsletter,
23
(2016),
2;
S. 3
- 13.
Zusätzliche Informationen
-
D. Spemann, T. Reinert, J. Vogt, J. Wassermann, T. Butz:
"Active compensation of stray magnetic fields at LIPSION";
Nuclear Instruments & Methods in Physics Research Section B,
201
(2003),
S. 79
- 84.
-
M. Spiegel, T. Strasser:
"Assessing the Value of Proactive Microgrid Scheduling";
IEEE Access,
10
(2022),
S. 51062
- 51078.
Zusätzliche Informationen
-
M. Spiegel, T. Strasser:
"Hybrid Optimization Toward Proactive Resilient Microgrid Scheduling";
IEEE Access,
9
(2021),
S. 124741
- 124756.
Zusätzliche Informationen
-
M. Spiegel, E. Veith, T. Strasser:
"The Spectrum of Proactive, Resilient Multi-Microgrid Scheduling: A Systematic Literature Review";
ENERGIES,
13
(2020),
17.
Zusätzliche Informationen
-
M. Spiryagin, P. Wolfs, C. Cole, S. Stichel, M. Berg, M. Plöchl:
"Influence of AC system design on the realisation of tractive efforts by high adhesion locomotives";
Vehicle System Dynamics,
55
(2017),
8;
S. 1241
- 1264.
-
A. Steindl:
"Invariant manifolds in control problems";
PAMM,
19
(2019),
1;
4 S.
Zusätzliche Informationen
-
A. Steindl:
"Optimal control of the deployment (and retrieval) of a tethered satellite under small initial disturbances";
Meccanica,
49
(2014),
8;
S. 1879
- 1885.
Zusätzliche Informationen
-
A. Steindl:
"Time optimal control for the deployment of a tethered satellite allowing for a massive tether";
Meccanica,
11
(2016),
51;
S. 2741
- 2751.
Zusätzliche Informationen
-
A. Steindl:
"Viscous damping issues in the dimension reduction of a fluid conveying tube";
Proceedings of the Institution of Mechanical Engineers Part C - Journal of Mechanical Engineering Science,
225
(2011),
10;
S. 2347
- 2353.
Zusätzliche Informationen
-
A. Steindl, J. Edelmann, M. Plöchl:
"Hopf bifurcations for an oversteer vehicle - the influence of wheel load changes";
PAMM,
21
(2021),
1.
-
A. Steindl, J. Edelmann, M. Plöchl:
"Limit cycles at oversteer vehicle";
Nonlinear Dynamics,
99
(2020),
1;
S. 313
- 321.
Zusätzliche Informationen
-
A. Steindl, G. Feichtinger:
"Bifurcations to Periodic Solutions in a Production/Inventory Model";
Journal of Nonlinear Science,
14
(2004),
6;
S. 469
- 503.
Zusätzliche Informationen
-
A. Steindl, H. Troger:
"Is the Sky-Hook Configuration Stable";
Nonlinear Dynamics,
40
(2005),
4;
S. 419
- 431.
Zusätzliche Informationen
-
A. Steindl, H. Troger:
"Mit dem Aufzug in den Weltraum?";
Internationale Mathematische Nachrichten,
197
(2004),
S. 9
- 25.
Zusätzliche Informationen
-
A. Steindl, H. Troger:
"Optimal Control of Deployment of a Tethered Subsatellite";
Nonlinear Dynamics,
31
(2003),
S. 257
- 274.
-
A. Steindl, H. Troger, G. Wiedermann:
"Simulation der Dynamik von Fesselsatelliten";
Wiley - PAMM,
www3.interscience.wiley.com
(2002),
ISSN: 1617-7061.
-
A. Stockinger, E. Gütl, S. Rath, D. Strasser, M. Bicher, A. Körner, H. Ecker:
"Direct Implementation of ARGESIM Benchmark C7 'Constrained Pendulum' in MATLAB and EXCEL";
Simulation Notes Europe,
29
(2019),
2;
S. 105
- 110.
Zusätzliche Informationen
-
W. Stoik, H. Schmiedmayer, V. Vécsei:
"Free Play of 3 Different Nail Designs Used for Fixation of Subtrochanteric Femoral Fractures";
Osteosynthesis and Trauma Care,
10
(2002),
S. 78
- 79.
-
A. Stribersky, F. Moser, J.-L. Peters, G. Schandl:
"Innovative System Dynamics Analyses of Rail Vehicles";
International Journal of Vehicle System Dynamics (Supplement),
41
(2004),
S. 448
- 457.
Zusätzliche Informationen
-
I. Sülü, E. Arslan:
"'Elastic-plastic states of two-layer curved bar under pure bending";
PAMM,
12
(2012).
-
E. Talic, A. Schirrer, M. Kozek, S. Jakubek:
"Multi-objective parameter identification of Euler-Bernoulli beams under axial load";
Journal of Sound and Vibration,
341
(2015),
S. 86
- 99.
Zusätzliche Informationen
-
M. Tautz, K. Besserer, S. Becker, M. Kaltenbacher:
"Source Formulations and Boundary Treatments for Lighthill's Analogy Applied to Incompressible Flows";
AIAA Journal,
56
(2018),
7;
S. 2769
- 2781.
Zusätzliche Informationen
-
M. Tautz, M. Kaltenbacher, S. Becker:
"Numerical Aeroacoustic Noise Prediction for Complex HVAC Systems";
SAE International,
1
(2018).
Zusätzliche Informationen
-
E. Thonhofer, S. Jakubek:
"Investigation of Stochastic Variation of Parameters for a Macroscopic Traffic Model";
Journal of Intelligent Transportation Systems,
22
(2018),
6;
S. 547
- 564.
Zusätzliche Informationen
-
E. Thonhofer, E. Luchini, S. Jakubek:
"A flexible, adaptive traffic network simulation with parameter estimation";
Journal of Intelligent Transportation Systems,
21
(2017),
1;
S. 63
- 77.
Zusätzliche Informationen
-
E. Thonhofer, T. Palau, A. Kuhn, S. Jakubek, M. Kozek:
"Macroscopic traffic model for large scale urban traffic network design";
Simulation Modelling Practice and Theory,
80
(2018),
S. 32
- 49.
Zusätzliche Informationen
-
S. Thormann, A. Schirrer, S. Jakubek:
"Safe and Efficient Cooperative Platooning";
IEEE Transactions on Intelligent Transportation Systems,
23
(2020),
2;
S. 1
- 13.
Zusätzliche Informationen
-
D. Tippelt, J. Edelmann, M. Plöchl, M. Jirout:
"Modelling, analysis and mitigation of self-excited vibrations of a magnetic track brake";
Proceedings of The Institution of Mechanical Engineers, Part F: Journal Of Rail And Rapid Transit,
236
(2021),
6;
S. 684
- 694.
-
A. Tondl, H. Ecker:
"On the problem of self-excited vibration quenching by means of parametric excitation";
Archive of Applied Mechanics,
72
(2003),
S. 923
- 932.
-
F. Toth, H. Hassanpour Guilvaiee, G. Jank:
"Acoustics on small scales - Modelling viscous effects in MEMS devices";
e & i Elektrotechnik und Informationstechnik,
138
(2021),
155-161;
7 S.
Zusätzliche Informationen
-
F. Toth, M. Kaltenbacher:
"Fully Coupled Linear Modelling of Incompressible Free-Surface Flow, Compressible Air and Flexible Structures";
International Journal for Numerical Methods in Engineering,
107
(2016),
S. 947
- 969.
Zusätzliche Informationen
-
F. Toth, C. Kirchlechner, F.D. Fischer, G Dehm, F. G. Rammerstorfer:
"Compressed Bi-Crystal Micropillars Showing a Sigmoidal Deformation State - A Computational Study";
Materials Science and Engineering A,
700
(2017),
S. 168
- 174.
Zusätzliche Informationen
-
D. Tumpold, M. Kaltenbacher, C. Glacer, M. Nawaz, A. Dehé:
"Multi field modeling of a microelectromechanical speaker system with electrostatic driving principle";
Microsystem Technologies - Micro- and Nanosystems - Information Storage and Processing Systems,
Micro- and Nanosystems
(2014),
2;
542 S.
Zusätzliche Informationen
-
D. Tumpold, M. Stark, N. Euler-Rolle, M. Kaltenbacher, S. Jakubek:
"Linearizing an electrostatically driven MEMS speaker by applying pre-distortion";
Sensors and Actuators A: Physical,
236
(2015),
S. 289
- 298.
Zusätzliche Informationen
-
K. Uenishi, H. Rossmanith:
"Optical methods in fault dynamics";
Optics and Lasers in Engineering,
40
(2003),
S. 325
- 339.
-
K. Uenishi, H. Rossmanith, N. Kouzniak:
"The effect of velocity and direction of detonation on the dynamic behavior of the rock mass in the vicinity of a borehole";
Journal of the Japan Explosives Society,
61
(2002),
6;
S. 254
- 259.
-
J. Unger, C. Hametner, S. Jakubek, M. Quasthoff:
"A novel methodology for non-linear system identification of battery cells used in non-road HEV";
Journal of Power Sources,
269
(2014),
S. 883
- 897.
Zusätzliche Informationen
-
J. Unger, M. Kozek, S. Jakubek:
"Nonlinear model predictive energy management controller with load and cycle prediction for non-road HEV";
Control Engineering Practice,
36
(2015),
S. 120
- 132.
Zusätzliche Informationen
-
J. Unger, M. Kozek, S. Jakubek:
"Reduced Order Optimization For Model Predictive Control Using Principal Control Moves";
Journal of Process Control,
22
(2012),
1;
S. 272
- 279.
Zusätzliche Informationen
-
M. Uslar, S. Rohjans, C. Neureiter, F. Pröstl Andrén, J. Velasquez, C. Steinbrink, V. Efthymiou, G. Migliavacca, S. Horsmanheimo, H. Brunner, T. Strasser:
"Applying the Smart Grid Architecture Model for Designing and Validating System-of-Systems in the Power and Energy Domain: A European Perspective";
ENERGIES,
12
(2019),
1.
Zusätzliche Informationen
-
R. Usta, E. Arslan:
"Bending behavior of a bi-morph piezoelectric curved beam";
PAMM,
14
(2014),
S. 191
- 192.
-
J. Valasek, M. Kaltenbacher, P. Svacek:
"On the Application of Acoustic Analogies in the Numerical Simulation of Human Phonation Process";
Flow Turbulence Combust,
101
(2018),
15 S.
Zusätzliche Informationen
-
A. Veichtlbauer, O. Langthaler, F. Pröstl Andrén, C. Kasberger, T. Strasser:
"Open Information Architecture for Seamless Integration of Renewable Energy Sources";
Electronics,
10
(2021),
4;
S. 496.
Zusätzliche Informationen
-
Y. Vetyukov:
"Endless elastic beam travelling on a moving rough surface with zones of stick and sliding";
Nonlinear Dynamics,
104
(2021),
S. 3309
- 3321.
Zusätzliche Informationen
-
Y. Vetyukov:
"Non-material finite element modelling of large vibrations of axially moving strings and beams";
Journal of Sound and Vibration,
414
(2018),
S. 299
- 317.
Zusätzliche Informationen
-
Y. Vetyukov, P.G. Gruber, M. Krommer:
"Nonlinear model of an axially moving plate in a mixed Eulerian-Lagrangian framework";
Acta Mechanica,
227
(2016),
10;
S. 2831
- 2842.
Zusätzliche Informationen
-
Y. Vetyukov, P.G. Gruber, M. Krommer, J. Gerstmayr, I. Gafur, G. WInter:
"Mixed Eulerian-Lagrangian description in materials processing: deformation of a metal sheet in a rolling mill";
International Journal for Numerical Methods in Engineering,
109
(2017),
10;
S. 1371
- 1390.
Zusätzliche Informationen
-
Y. Vetyukov, E. Hansy-Staudigl, M. Krommer:
"Hybrid asymptotic-direct approach to finite deformations of electromechanically coupled piezoelectric shells";
Acta Mechanica,
229
(2018),
2;
S. 953
- 974.
Zusätzliche Informationen
-
Y. Vetyukov, E. Oborin, M. Krommer, V. Eliseev:
"Transient modelling of flexible belt drive dynamics using the equations of a deformable string with discontinuities";
Mathematical and Computer Modelling of Dynamical Systems,
23
(2017),
1;
S. 40
- 54.
Zusätzliche Informationen
-
Y. Vetyukov, E. Oborin, J. Scheidl, M. Krommer, C. Schmidrathner:
"Flexible belt hanging on two pulleys: Contact problem at non-material kinematic description";
International Journal of Solids and Structures,
168
(2019),
S. 183
- 193.
Zusätzliche Informationen
-
Y. Vetyukov, C. Schmidrathner:
"A rod model for large bending and torsion of an elastic strip with a geometrical imperfection";
Acta Mechanica,
230
(2019),
S. 4061
- 4075.
Zusätzliche Informationen
-
J. Vilsecker, W. Mack, A. Falkner, R. Hanfstingl:
"Effects of non-linear modelling of a hydromount in full vehicle simulation";
Int. J. Vehicle Noise and Vibration,
7
(2011),
2;
S. 109
- 128.
-
J. Vilsecker, W. Mack, A. Falkner, R. Hanfstingl:
"On the complexity of hydromount-models in full vehicle simulation";
PAMM,
11
(2011),
S. 341
- 342.
-
B. Voglauer, A. Grausam, H. Jörgl:
"Reaction -kinetics of the vanadium roast process using steel slag as a secondary raw material";
Minerals Engineering,
17
(2004),
S. 317
- 321.
-
B. Voglauer, H. Jörgl:
"Dynamic Model of a Roast Process for Simulation and Control";
Mathematical and Computer Modelling of Dynamical Systems,
10
(2004),
3-4;
S. 217
- 230.
-
H. Vogtenhuber, D. Pernsteiner, R. Hofmann:
"Experimental and Numerical Investigations on Heat Transfer of Bare Tubes in a Bubbling Fluidizes Bed with Respect to Better Heat Integration in Temperature Swing Adsorption Systems";
ENERGIES,
12
(2019),
2646;
26 S.
-
M. Vrlic, D. Ritzberger, S. Jakubek:
"Model-Predictive-Control-Based Reference Governor for Fuel Cells in Automotive Application Compared with Performance from a Real Vehicle";
ENERGIES,
14(8)
(2021),
2206;
S. ##.
Zusätzliche Informationen
-
M. Vrlic, D. Ritzberger, S. Jakubek:
"Safe and Efficient Polymer Electrolyte Membrane Fuel Cell Control Using Successive Linearization Based Model Predictive Control Validated on Real Vehicle Data";
ENERGIES,
13(20)
(2020),
5353;
S. ##.
Zusätzliche Informationen
-
A. Wasserburger, N. Didcock, C. Hametner:
"Efficient Real Driving Emissions Calibration of Automotive Powertrains under Operating Uncertainties";
Engineering Optimization,
online
(2021).
Zusätzliche Informationen
-
A. Wasserburger, C. Hametner, N. Didcock:
"Risk-averse real driving emissions optimization considering stochastic influences";
Engineering Optimization,
52
(2020),
1;
S. 122
- 138.
Zusätzliche Informationen
-
A. Wasserburger, O. König, S. Jakubek:
"Estimation and compensation of DC-Link voltage disturbances in a DC-DC converter for battery emulation";
International Journal of Control,
93
(2020),
4;
S. 922
- 933.
Zusätzliche Informationen
-
A. Wasserburger, A. Schirrer, N. Didcock, C. Hametner:
"A probability-based short-term velocity prediction method for energy-efficient cruise control";
IEEE Transactions on Vehicular Technology,
69
(2020),
12;
S. 14424
- 14435.
Zusätzliche Informationen
-
A. Wasserburger, A. Schirrer, C. Hametner:
"Stochastic Optimisation for the Design of Energy-Efficient Controllers for Cooperative Truck Platoons";
International Journal of Intelligent Transportation Systems Research,
online
(2022).
Zusätzliche Informationen
-
J. Weber, S. Becker, C. Scheit, J. Grabinger, M. Kaltenbacher:
"Aeroacoustics of Darrieus wind turbine";
International Journal Of Aeroacoustics,
14
(2015),
S. 883
- 902.
Zusätzliche Informationen
-
M. Weigel, P. Lugner, M. Plöchl:
"A Driver Model for a Truck-Semitrailer Combination";
International Journal of Vehicle System Dynamics (Supplement),
41
(2004),
S. 321
- 331.
Zusätzliche Informationen
-
M. Weigel, W. Mack, A. Riepl:
"Nonparametric Shock Absorber Modelling Based on Standard Test Data";
Vehicle System Dynamics,
38
(2002),
6;
S. 415
- 432.
-
F. Wein, M. Kaltenbacher, M. Stingl:
"Topology optimization of a cantilevered piezoelectric energy harvester using stress norm constraints";
Structural and Multidisciplinary Optimization,
Structural and Multidisciplinary Optimization
(2013),
48;
S. 173
- 187.
-
J. Welte, T. Kniffka, H. Ecker:
"Parametric Excitation in a Two Degree of Freedom MEMS System";
Shock and Vibration,
20
(2013),
6;
S. 1113
- 1124.
Zusätzliche Informationen
-
C. Westermayer, R. Priesner, M. Kozek, R. Bauer:
"High Dynamic Torque Control for Industrial Engine Test Beds";
IEEE Transactions on Industrial Electronics,
60
(2013),
9;
S. 3877
- 3888.
Zusätzliche Informationen
-
K. Wiese, T. Kessel, R. Mundl, B. Wies:
"An Analytical Thermodynamic Approach to Friction of Rubber on Ice";
Tire Science and Technology,
40
(2012),
2;
S. 124
- 150.
-
A. Yang, D. Berry, M. Kaltenbacher, M. Döllinger:
"Three-dimensional biomechanical properties of human vocal folds: Parameter optimization of a numerical model to match in vitro dynamics";
Journal of the Acoustical Society of America,
131
(2012),
2;
S. 1378
- 1390.
Zusätzliche Informationen
-
Chr. Zach, W. Mack, G. Fruhmann, W. Tieber:
"On the performance of rheological shock absorber models in full vehicle simulation";
Vehicle System Dynamics,
45
(2007),
11;
S. 981
- 999.
-
C. Zanabria, F. Pröstl Andrén, J. Kathan, T. Strasser:
"Rapid Prototyping of Multi-Functional Battery Energy Storage System Applications";
Applied Sciences,
8
(2018),
8.
Zusätzliche Informationen
-
C. Zanabria, F. Pröstl Andrén, T. Strasser:
"An Adaptable Engineering Support Framework for Multi-Functional Energy Storage System Applications";
Sustainability,
10
(2018),
11.
Zusätzliche Informationen
-
C. Zauner, J. Edelmann, M. Plöchl:
"Modelling, validation and characterisation of high-performance suspensions by means of a suspension test rig";
International Journal of Vehicle Design,
79
(2019),
2/3;
S. 107
- 126.
-
M. Zauner, F. Altenberger, H. Knapp, M. Kozek:
"Phase independent finding and classification of wheel-loader work-cycles";
Automation in Construction,
109
(2020),
109.
Zusätzliche Informationen
-
M. Zauner, P. Mandl, C. Hametner, O. König, S. Jakubek:
"Flatness-Based Discrete-Time Control of a Battery Emulator Driving a Constant Power Load";
IEEE Journal of Emerging and Selected Topics in Power Electronics,
9
(2021),
6;
S. 6864
- 6874.
Zusätzliche Informationen
-
M. Zauner, P. Mandl, O. König, C. Hametner, S. Jakubek:
"Stability Analysis of a Flatness-Based Controller Driving a Battery Emulator with Constant Power Load";
at - Automatisierungstechnik (eingeladen),
69
(2021),
2;
S. 142
- 154.
Zusätzliche Informationen
-
Ch. Zehetner, M. Krommer:
"Control of Torsional Vibrations in Rods by Piezoelectric Sensors and Actuators";
Structural Control & Health Monitoring,
19(6)
(2012),
S. 574
- 589.
-
S. Zendegan, A. Ferrara, S. Jakubek, C. Hametner:
"Predictive Battery State of Charge Reference Generation Using Basic Route Information for Optimal Energy Management of Heavy-Duty Fuel Cell Vehicles";
IEEE Transactions on Vehicular Technology,
70
(2021),
S. 12517
- 12528.
Zusätzliche Informationen
-
G. Zenz, W. Berger, J. Gerstmayr, M Nader, M. Krommer:
"Design of piezoelectric transducer arrays for passive and active modal control of thin plates";
Smart Structures and Systems,
12(5)
(2013),
S. 547
- 577.
-
M. Zigo, E. Arslan, W. Mack, G. Kepplinger:
"Computationally effective spot-weld fatigue life estimation for vehicle components";
PAMM,
19
(2019).
-
M. Zigo, E. Arslan, W. Mack, G. Kepplinger:
"Efficient frequency-domain fatigue life estimation of spot welds in vehcile components";
Forschung im Ingenieurwesen,
83
(2019),
S. 921
- 931.
-
S. Zörner, M. Kaltenbacher, M. Döllinger:
"Investigation of prescribed movement in fluid-structure interaction simulation for the human phonation process";
Computers & Fluids,
86
(2013),
0;
S. 133
- 140.
Zusätzliche Informationen
-
S. Zörner, M. Kaltenbacher, R. Lerch, A. Sutor, M. Döllinger:
"Measurement of the elasticity modulus of soft tissues";
Journal of Biomechanics,
43
(2010),
S. 1540
- 1545.
-
S. Zörner, P. Sidlof, A. Hüppe, M. Kaltenbacher:
"Flow and Acoustic Effects in the Larynx for Varying Geometries";
Acta Acustica united with Acustica (eingeladen),
102
(2016),
S. 257
- 267.
Editorials in wiss. Zeitschriften
-
N. Aksel, H Irschik, M. Krommer, A. Soldati, G. Weng:
"Cristian Marchioli to succeed Alfredo Soldati as an Editor of Acta Mechanica";
Acta Mechanica,
228
(2017),
4;
S. 1211.
-
N. Aksel, H Irschik, M. Krommer, A. Soldati, G. Weng:
"Review and Perspective in Mechanics";
Acta Mechanica,
227
(2016),
12;
S. 3325.
-
N. Aksel, H Irschik, M. Krommer, A. Soldati, G. Weng:
"Review and Perspective in Mechanics";
Acta Mechanica,
228
(2017),
3;
S. 739.
-
N. Aksel, H Irschik, M. Krommer, A. Soldati, G. Weng:
"Special Issue dedicated to the memory of Franz Ziegler";
Acta Mechanica,
229
(2018),
2;
S. 421.
-
J. Edelmann, M. Plöchl, P. E. Pfeffer:
"Editorial";
Vehicle System Dynamics,
56
(2018),
6;
S. 659
- 660.
-
J. Edelmann, M. Plöchl, P. E. Pfeffer:
"Special Issue: AVEC´16";
Vehicle System Dynamics,
56
(2018),
5;
S. 659
- 851.
-
H Irschik, M. Krommer, C. Marchioli, G. Weng:
"Review and Perspective on the Soft Matter Modeling of Cellular Mechanobiology";
Acta Mechanica,
228
(2017),
12;
S. 4093.
-
H Irschik, M. Krommer, C. Marchioli, G. Weng, M. Ostoja-Starzewski:
"Films over topography: from creeping flow to linear stability, theory and experiments, a review";
Acta Mechanica,
229
(2018),
4;
S. 1451.
-
Y. Vetyukov, A. Belyaev:
"Special issue on structural mechanics dedicated to the memory of Vladimir Yeliseyev (1947-2017)";
Acta Mechanica,
230
(2019),
S. 3823
- 3824.
Zusätzliche Informationen
Buchbeiträge
-
T. Angeli, M. Gföhler, T. Eberharter, P. Lugner, L. Rinder:
"Optimiziation of the pedal path for cycling powered by lower extremity muscles activated by Functional Electrical Stimulation.";
in: "Computer Methods in Biomechanics und Biomedical Engineering - 3",
Gordon and Breach Science Publishers,
2001,
ISBN: 90-5699-321-6,
S. 263
- 268.
-
F. Breitenecker, H. Ecker, I. Bausch-Gall:
"Simulation mit ACSL, Fortschritte in der Simulationstechnik, Bd. 2";
in: "Fortschritte in der Simulationstechnik",
F. Breitenecker (Hrg.);
herausgegeben von: ASIM;
Vieweg,
1993.
-
J. Edelmann, M. Plöchl:
"Analysis of controllability of automobiles at steady-state cornering considering different drive concepts";
in: "The Dynamics of Vehicles on Roads and Tracks",
M. Spiryagin, T. Gordon, C. Cole, T. McSweeney (Hrg.);
herausgegeben von: International Association for Vehicle System Dynamics (IAVSD);
CRC Press,
2018,
ISBN: 978-1-138-03571-3,
S. 3
- 8.
-
J. Edelmann, M. Plöchl:
"Electronic Stability Control of a Narrow Tilting Vehicle";
in: "Load Simulation and Analysis in Automotive Engineering, 2011",
herausgegeben von: SAE International;
SAE International,
2011, (eingeladen),
ISBN: 978-0-7680-4746-2.
-
J. Filizikowski, P. Kopacek:
"Innowacja wielotarczowego rozdrabniania zywnosci";
in: "Inzynieria I Aparatura Chemiczna",
ISSN 0368-0827,
2007,
ISSN: 0368-0827.
-
C. Hametner, S. Jakubek:
"Data-driven methodologies for battery state-of-charge observer design";
in: "Automotive Battery Technology",
herausgegeben von: Alexander Thaler; Daniel Watzenig;
Springer-Verlag,
Wien,
2014, (eingeladen),
ISBN: 978-3-319-02522-3,
S. 111
- 125.
Zusätzliche Informationen
-
C. Hametner, S. Jakubek:
"Nonlinear System Identification through Local Model Approaches: Partitioning Strategies and Parameter Estimation";
in: "Modelling, Simulation and Identification",
A. Mohamed (Hrg.);
Sciyo,
Rijeka,
2010, (eingeladen),
ISBN: 978-953-307-136-7,
S. 179
- 194.
-
C. Hametner, S. Jakubek:
"On the Potential of Constraints in Nonlinear System Identification";
in: "Advanced Dynamics and Model-Based Control of Structures and Machines",
herausgegeben von: Irschik, Hans; Krommer, Michael; Belyaev, Alexander K.;
Springer-Verlag,
Wien,
2011, (eingeladen),
ISBN: 978-3-7091-0796-6,
S. 93
- 102.
Zusätzliche Informationen
-
M. Han, P. Kopacek:
"Neural Networks for the Control of Soccer Robots";
in: "Computational Intelligence, Theory and Applications",
herausgegeben von: Bernd Reusch, Editor;
Springer-Verlag,
Netherland,
2005,
ISBN: 3-540-22807-1,
S. 621
- 628.
-
M. Han, P. Kopacek, B. Putz, E. Schierer, M. Würzl:
"Mobile Mini Robots for MAS";
in: "Climbing and Walking Robots",
herausgegeben von: Manuel A. Armada, Pablo Gonzalez de Santos (Eds.);
Springer-Verlag,
Netherlands,
2005,
ISBN: 3-540-22992-2,
S. 201
- 209.
-
E. Hansy-Staudigl, M. Krommer, A. Humer:
"Modeling of Dielectric Elastomers Accounting for Electrostriction by Means of a Multiplicative Decomposition of the Deformation Gradient Tensor";
in: "Analysis and Modelling of Advanced Structures and Smart Systems",
H. Altenbach, E. Carrera, G. Kulikov (Hrg.);
Springer,
Vienna,
2018,
ISBN: 978-981-10-6764-8,
S. 259
- 290.
Zusätzliche Informationen
-
M. Haudum, J. Edelmann, M. Plöchl, M. Höll:
"Vehicle state estimation from a sports-car application point of view focusing on handling dynamics";
in: "Advanced Vehicle Control: Proceedings of the 13th International Symposium on Advanced Vehicle Control (AVEC'16)",
CRC Press,
2016,
ISBN: 9781138029927,
S. 521
- 526.
-
H. Husstedt, U. Ausserlechner, M. Kaltenbacher:
"Accurate Scanning of Magnetic Fields";
in: "Optical, Acoustic, Magnetic, and Mechanical Sensor Technologies",
K. Iniewski (Hrg.);
CRC Press,
2012, (eingeladen),
ISBN: 978-1439869758,
S. 211
- 239.
-
H. Husstedt, U. Ausserlechner, M. Kaltenbacher:
"Accurate Scanning of Magnetic Fields";
in: "Smart Sensors for Industrial Applications",
K. Iniewski (Hrg.);
Taylor & Francis Group,
2013, (eingeladen),
ISBN: 978-1466568105,
S. 273
- 288.
-
H Irschik, M. Krommer, Y. Vetyukov, M Nader, H. von Garssen:
"On a Momentum Based Version of Lagrange's Equations";
in: "Multibody System Dynamics, Robotics and Control",
H. Gattringer, J. Gerstmayr (Hrg.);
Springer,
WienNewYork,
2013,
ISBN: 978-3-7091-1289-2,
S. 231
- 242.
-
S. Jakubek, M. Kozek:
"Controls and Identification";
in: "Road and Off-Road Vehicle System Dynamics Handbook",
G. Mastinu, M. Plöchl (Hrg.);
CRC Press,
2014, (eingeladen),
ISBN: 9780849333224,
S. 159
- 219.
Zusätzliche Informationen
-
M. Kaltenbacher:
"Fundamental Equations of Acoustics";
in: "Computational Acoustics",
herausgegeben von: Manfred Kaltenbacher;
Springer International Publishing,
2018,
ISBN: 978-3-319-59038-7,
S. 1
- 33.
Zusätzliche Informationen
-
M. Kaltenbacher:
"Non-conforming Finite Elements for Flexible Discretization with Applications to Aeroacoustics";
in: "Computational Acoustics",
Springer International Publishing,
2018, (eingeladen),
ISBN: 978-3-319-59038-7,
S. 35
- 67.
Zusätzliche Informationen
-
M. Killian, A. Schirrer, S. Jakubek, M. Kozek:
"Energiemanagement in Gebäuden und Smart Grids - optimale Echtzeit Lösungen";
in: "Lifestyle vs. Vernunft, Entwicklung künftiger Energie- und Verkehrssysteme",
43;
herausgegeben von: Verein für Ökologie und Umweltforschung;
facultas Universitätsverlag & maudrich,
facultas Universitätsverlag, Wien, Austria,
2018, (eingeladen),
ISBN: 978-3-7089-1658-3,
S. 51
- 70.
-
F. Klinger, J. Edelmann, M. Plöchl, S. Jeindl:
"Effects of different excitation spectra on virtual suspension damper design";
in: "The Dynamics of Vehicles on Roads and Tracks",
M. Rosenberger, M. Plöchl, K. Six, J. Edelmann (Hrg.);
herausgegeben von: International Association for Vehicle System Dynamics (IAVSD);
CRC Press,
2016,
ISBN: 978-1-138-02885-2,
10 S.
-
P. Kopacek:
"Automation in Sports and Entertainment";
in: "Springer Handbook of Automation",
S. Nof (Hrg.);
herausgegeben von: Springer;
Springer-Verlag,
Berlin Heidelberg,
2009,
ISBN: 978-3-540-78830-0,
S. 1313
- 1331.
Zusätzliche Informationen
-
P. Kopacek:
"Menschliche Roboter - Robotermenschen";
in: "Der Mensch - ein "animal rationale"?",
H. Schmidinger, C. Sedmak (Hrg.);
Wissenschaftliche Buchgesellschaft,
Darmstadt,
2004,
ISBN: 3-534-17501-8,
S. 113
- 123.
-
P. Kopacek:
"Robotersysteme";
in: "Medizinisches Lexikon der beruflichen Belastungen und Gefährdungen",
G. Pressel, K. Landau (Hrg.);
Gentner Verlag,
Stuttgart, Deutschland,
2004,
ISBN: 3-87247-617-3,
S. 549
- 552.
-
P. Kopacek:
"Robotersysteme";
in: "Lexikon Arbeitsgestaltung",
herausgegeben von: Kurt Landau;
Gentner Verlag - ergonomia Verlag,
Stuttgart,
2007,
ISBN: 978-3-87247-655-5,
S. 1081
- 1084.
-
P. Kopacek:
"Robots for Humanitarian Demining";
in: "Advances in Automatic Control",
M. Voicu (Hrg.);
herausgegeben von: Technical University "Gh. Asachi" of Iasi, Romania;
Kluwer,
Boston,
2003,
ISBN: 1-4020-7607-x,
S. 159
- 172.
-
P. Kopacek, M. Hersh:
"Roboethics";
in: "Ethical Engineering for International Development and Environmental Sustainability",
M. Hersh (Hrg.);
Springer Verlag London,
London,
2015,
ISBN: 978-1-4471-6617-7,
S. 65
- 102.
Zusätzliche Informationen
-
M. Kozek, A. Schirrer:
"Discussion";
in: "Modeling and Control for a Blended Wing Body Aircraft",
M. Kozek, A. Schirrer (Hrg.);
Springer-Verlag,
Cham,
2015,
ISBN: 978-3-319-10791-2,
S. 289
- 292.
-
M. Kozek, A. Schirrer:
"Flight Control Design";
in: "Modeling and Control for a Blended Wing Body Aircraft",
M. Kozek, A. Schirrer (Hrg.);
Springer-Verlag,
Cham,
2015,
ISBN: 978-3-319-10791-2,
S. 18
- 25.
-
M. Kozek, A. Schirrer:
"Overview and Motivation";
in: "Modeling and Control for a Blended Wing Body Aircraft",
M. Kozek, A. Schirrer (Hrg.);
Springer-Verlag,
Cham,
2015,
ISBN: 978-3-319-10791-2,
S. 1
- 5.
-
M. Kozek, A. Schirrer, F. Stroscher, M. Valasek, Z. Sika, T. Vampola, T. Belschner:
"Main Results and Validation";
in: "Modeling and Control for a Blended Wing Body Aircraft",
M. Kozek, A. Schirrer (Hrg.);
Springer-Verlag,
Cham,
2015,
ISBN: 978-3-319-10791-2,
S. 267
- 289.
-
M. Krommer, Y. Vetyukov:
"Beams, Plates, and Shells";
in: "Encyclopedia of Continuum Mechanics",
H. Altenbach, A. Öchsner (Hrg.);
Springer,
2018,
ISBN: 978-3-662-53605-6,
S. 1
- 8.
Zusätzliche Informationen
-
P. Lugner:
"Tyre models, propulsion and handling of road vehicles";
in: "Dynamical analysis of vehicle systems",
W. Schiehlen (Hrg.);
herausgegeben von: CISM Courses and Lectures, vol. 497;
Springer-Verlag,
Wien New York,
2007, (eingeladen),
ISBN: 9783211766651,
S. 129
- 182.
-
P. Lugner, J. Edelmann:
"Basics of vehicle dynamics, vehicle models";
in: "Vehicle Dynamics of Modern Passenger Cars",
582;
P. Lugner (Hrg.);
Springer International Publishing,
2018,
ISBN: 978-3-319-79007-7,
S. 1
- 45.
-
P. Lugner, M. Plöchl:
"Introduction";
in: "Tire Model Performance Test (TMPT)",
P. Lugner, M. Plöchl (Hrg.);
Taylor & Francis Group,
2007,
ISBN: 9780415473767,
S. 3
- 5.
-
P. Lugner, M. Plöchl:
"Results";
in: "Tire Model Performance Test (TMPT)",
P. Lugner, M. Plöchl (Hrg.);
Taylor & Francis Group,
2007,
ISBN: 9780415473767,
S. 29
- 55.
-
P. Lugner, M. Plöchl:
"Specifications of the test procedures";
in: "Tire Model Performance Test (TMPT)",
P. Lugner, M. Plöchl (Hrg.);
Taylor & Francis Group,
2007,
ISBN: 9780415473767,
S. 21
- 28.
-
P. Lugner, M. Plöchl, Ph. Heinzl:
"Concepts for the modelling of a passenger car";
in: "Multi-body Dynamics: Monitoring and Simulation Techniques - II",
H. Rahnejat, M. Ebrahimi, R. Whalley (Hrg.);
Professional Engineering Publishing Limited,
London and Bury St Edmunds, UK,
2000,
ISBN: 1860582583,
S. 81
- 95.
-
W. Mack, A. Steindl:
"Streiflichter zur Geschichte der "Wiener Schule der Mechanik"";
in: "Die Fakultät für Maschinenwesen und Betriebswissenschaften",
Böhlau,
2015,
S. 49
- 62.
-
R. Mundl:
"Reifen und Räder";
in: "Fahrwerkhandbuch",
herausgegeben von: B. Heißing, M. Ersoy, S. Gies;
Springer-Verlag,
Wiesbaden,
2013,
ISBN: 978-3-658-01991-4.
-
P.H. Osanna, M.N. Durakbasa, J.M. Bauer, H. Tahirova, L. Kräuter:
"Management of Natural Resources, Sustainable Development and Ecological Hazards";
in: "Management of Natural Resources, Sustainable Development and Ecological Hazards",
WIT Press,
2006,
ISBN: 978-1-84564-048-4.
-
M. Plöchl, J. Edelmann:
"Driver models in automobile dynamics application";
in: "Road and off-road vehicle system dynamics handbook",
G. Mastinu, M. Plöchl (Hrg.);
CRC Press,
2014,
ISBN: 9780849333224,
S. 1477
- 1521.
-
M. Plöchl, J. Edelmann:
"Fahrradfahren - "Steer into the fall"";
in: "Beiträge zu einer ökologisch und sozial verträglichen Verkehrsplanung 1/2015",
H. Zukal, T. Brezina (Hrg.);
Institut für Verkehrswissenschaften, Technische Universität Wien,
Wien,
2015, (eingeladen),
ISBN: 978-3-9503375-3-2,
S. 75
- 89.
-
M. Plöchl, P. Lugner, J. Edelmann:
"Basics of longitudinal and lateral dynamics";
in: "Road and off-road vehicle system dynamics handbook",
G. Mastinu, M. Plöchl (Hrg.);
CRC Press,
2014,
ISBN: 9780849333224,
S. 971
- 1021.
-
G. Previati, M. Gobbi, G. Mastinu, S. Dell´Agostino, J. Edelmann, M. Plöchl:
"Friction estimation at tyre-ground contact based on the Gough-plot for safe autonomous vehicles";
in: "The Dynamics of Vehicles on Roads and Tracks",
herausgegeben von: International Association for Vehicle System Dynamics (IAVSD);
CRC Press,
2016,
10 S.
-
I. Reichl, W. Auzinger, H. Schmiedmayer, E. Weinmüller:
"Reconstruting the knee joint mechnism from kinematic data";
in: "ASC Report48/2009",
herausgegeben von: Institute for Analysis and Scientific Computing;
Vienna University of Technology,
Wien,
2009,
ISBN: 978-3-902627-02-5.
Zusätzliche Informationen
-
J. Scheidl, Y. Vetyukov:
"A Non-linear Theory of Thin-Walled Rods of Open Profile Deduced with Incremental Shell Equations";
in: "Recent Developments in the Theory of Shells",
Advanced Structured Materials, vol 110;
H. Altenbach, J. Chróścielewski, V.A. Eremeyev, K. Wiśniewski (Hrg.);
Springer Nature Switzerland AG,
2019,
ISBN: 978-3-030-17746-1,
S. 541
- 575.
Zusätzliche Informationen
-
A. Schirrer, G. Aschauer, S. Jakubek:
"Hardware-in-the-Loop Testing of High-Speed Pantographs Using Real-Time Catenary Emulation";
in: "Dynamics and Control of Advanced Structures and Machines",
H. Irschik, A. Belyaev, M. Krommer (Hrg.);
Springer International Publishing,
Switzerland,
2016,
ISBN: 978-3-319-43079-9,
S. 75
- 83.
Zusätzliche Informationen
-
A. Schirrer, G. Aschauer, S. Jakubek:
"High-Dynamic Accurate Railway Catenary Emulation by Real-Time Mechanical Impedance Control for Pantograph Testing";
in: "Simulation and Testing for Vehicle Technology",
C. Gühmann, J. Riese, K. von Rüden (Hrg.);
Springer International Publishing,
Switzerland,
2016,
ISBN: 978-3-319-32344-2,
S. 277
- 295.
Zusätzliche Informationen
-
A. Schirrer, M. Kozek:
"DK-Iteration Design";
in: "Modeling and Control for a Blended Wing Body Aircraft",
M. Kozek, A. Schirrer (Hrg.);
Springer-Verlag,
Cham,
2015,
ISBN: 978-3-319-10791-2,
S. 156
- 164.
-
A. Schirrer, M. Kozek:
"Introduction to Feedback Control Designs";
in: "Modeling and Control for a Blended Wing Body Aircraft",
M. Kozek, A. Schirrer (Hrg.);
Springer-Verlag,
Cham,
2015,
ISBN: 978-3-319-10791-2,
S. 147
- 151.
-
A. Schirrer, M. Kozek:
"Robust Eigenstructure Assignment";
in: "Modeling and Control for a Blended Wing Body Aircraft",
M. Kozek, A. Schirrer (Hrg.);
Springer-Verlag,
2015,
ISBN: 978-3-319-10791-2,
S. 151
- 156.
-
A. Schirrer, M. Kozek, S. Jakubek:
"Convex Design for Lateral Control of a Blended Wing Body Aircraft";
in: "Mechanics and Model-Based Control of Advanced Engineering Systems",
A. Belyaev, H. Irschik, M. Krommer (Hrg.);
Springer-Verlag,
Wien,
2014,
ISBN: 9783709115701,
S. 255
- 263.
-
A. Schirrer, M. Kozek, J. Schöftner:
"MIMO Vibration Control for a Flexible Rail Car Body: Design and Experimental Validation";
in: "Vibration Analysis and Control - New Trends and Developments",
F. Beltran-Carbajal (Hrg.);
InTech,
Rijeka,
2011, (eingeladen),
ISBN: 978-953-307-433-7,
28 S.
Zusätzliche Informationen
-
A. Schirrer, S. Thormann:
"A Modular Solver for Mechanical System Dynamics Under One-Sided Contact Constraints";
in: "Dynamics and Control of Advanced Structures and Machines",
Springer Nature Switzerland AG,
Cham,
2019,
ISBN: 978-3-319-90883-0,
S. 147
- 155.
-
C. Schmidrathner, Y. Vetyukov:
"Non-material Finite Elements for Spatial Deformations of Belts";
in: "Contributions to Advanced Dynamics and Continuum Mechanics",
Advanced Structured Materials 114;
H. Altenbach, H Irschik, V. Matveenko (Hrg.);
Springer Nature Switzerland AG,
2019,
ISBN: 978-3-030-21250-6,
S. 227
- 242.
Zusätzliche Informationen
-
A. Steindl:
"Static and Dynamic Bifurcations";
in: "Encyclopedia of Continuum Mechanics",
H. Altenbach, A. Öchsner (Hrg.);
Springer-Verlag,
Berlin Heidelberg,
2018,
ISBN: 978-3-662-55770-9,
S. 1
- 8.
Zusätzliche Informationen
-
A. Teufel, A. Steindl, H. Troger:
"Classification of Non-Smooth Bifurcations for a Friction Oscillator";
in: "Problems of Analytical Mechanics and Stability Theory",
V.V. Kozlov et al. (Hrg.);
PhysMathLit Publisher,
Moscow,
2009,
ISBN: 9785-94052-185-3,
S. 161
- 175.
Zusätzliche Informationen
-
D. Tippelt, J. Edelmann, M. Plöchl, M. Jirout:
"Analysis of self-excited vibrations of an electromagnetic track brake";
in: "Advances in Dynamics of Vehicles on Roads and Tracks. IAVSD 2019. Lecture Notes in Mechanical Engineering.",
Springer,
2020,
ISBN: 978-3-030-38076-2,
S. 442
- 451.
-
A. Tondl, H. Ecker:
"On the problem of self-excited vibration quenching by means of parametric excitation";
in: "Festschrift - Zum 90. Geburtstag von Herrn Prof. Dr.rer.nat. Dr.-Ing. E.h. Kurt Magnus",
H. Ulbrich (Hrg.);
Lehrstuhl für Angew. Mechanik der TU München,
Garching,
2002,
S. 337
- 348.
Zusätzliche Informationen
-
F. Toth, M. Kaltenbacher:
"Coupling of Incompressible Free-Surface Flow, Acoustic Fluid and Flexible Structure Via a Modal Basis";
in: "Symposium on Model Order Reduction of Coupled Systems",
herausgegeben von: Springer International Publishing;
Springer International Publishing,
2019,
S. 141
- 150.
-
L. Toth, H. Rossmanith, T. Siewert:
"Historical Background and Development of the Charpy Test";
in: "From Charpy to Present Impact Testing",
D. Francois, A. Pineau (Hrg.);
Elsevier,
2002,
S. 3
- 17.
-
Y. Vetyukov:
"Mechanics of Axially Moving Structures at Mixed Eulerian-Lagrangian Description";
in: "Analysis and Modelling of Advanced Structures and Smart Systems",
H. Altenbach, E. Carrera, G. Kulikov (Hrg.);
Springer,
Vienna,
2018,
ISBN: 978-981-10-6764-8,
S. 291
- 325.
Zusätzliche Informationen
-
Y. Vetyukov:
"Stability and Supercritical Deformation of a Circular Ring with Intrinsic Curvature";
in: "Dynamics and Control of Advanced Structures and Machines",
H Irschik, A. Belyaev, M. Krommer (Hrg.);
Springer International Publishing,
2017,
ISBN: 978-3-319-43079-9,
S. 23
- 32.
Zusätzliche Informationen
-
C. Westermayer, A. Schirrer, M. Kozek:
"Lateral Maneuver Loads Alleviation System Via Convex Optimization";
in: "Modeling and Control for a Blended Wing Body Aircraft",
M. Kozek, A. Schirrer (Hrg.);
Springer-Verlag,
Cham,
2015,
ISBN: 978-3-319-10791-2,
S. 237
- 247.
-
C. Westermayer, A. Schirrer, M. Kozek:
"LPV Feedback Design";
in: "Modeling and Control for a Blended Wing Body Aircraft",
M. Kozek, A. Schirrer (Hrg.);
Springer-Verlag,
2015,
ISBN: 978-3-319-10791-2,
S. 181
- 201.
-
C. Westermayer, A. Schirrer, M. Kozek:
"Maneuver Loads Alleviation System Via Hinfty Full-Information Feed-Forward Design";
in: "Modeling and Control for a Blended Wing Body Aircraft",
M. Kozek, A. Schirrer (Hrg.);
Springer-Verlag,
Cham,
2015,
ISBN: 978-3-319-10791-2,
S. 247
- 263.
Beiträge in Tagungsbänden
-
G. Aschauer, A. Schirrer, M. Kozek, S. Jakubek:
"Realtime-capable FE-based railway catenary emulation via pantograph test rig impedance control";
in: "Proceedings of the 20th IFAC World Congress",
herausgegeben von: Elsevier;
IFAC-PapersOnLine,
2017,
S. 8636
- 8641.
Zusätzliche Informationen
-
B. Barkow, A. Steindl, H. Troger:
"Targeting Control of Unfolding of Space Structures Connected by Springs";
in: "Proceedings of the Third European Conference on Structural Control",
R. Flesch, H Irschik, M. Krommer (Hrg.);
herausgegeben von: Technische Universität Wien;
TU Wien,
2005,
S. S1-135
- S1-138.
Zusätzliche Informationen
-
D. Brandt, G. Feichtinger, P. Kopacek, L. Stapleton:
"Some Aspects of Societal and International Stability and Change";
in: "Workshop on Supplemental Ways for Improving International Stability (SWIIS 2010)",
herausgegeben von: IFAC;
Elsevier Science Publishers B.V.,
2010,
ISBN: 978-3-902661-92-0,
S. 161
- 164.
-
F. Breitenecker, H. Ecker, B. Heinzl, A. Körner, M. Rößler, N. Popper:
"Change of independent variable for state event detection in system simulation - evaluation with argesim benchmarks";
in: "The 24th European Modeling and Simulation Symposium",
F. Breitenecker, A. Bruzzone, E. Jimenez, F. Longo, Y. Merkuryev, B. Sokolov (Hrg.);
DIME Università di Genova,
Rende,
2012,
ISBN: 978-88-97999-09-6,
S. 531
- 536.
Zusätzliche Informationen
-
F. Bruck, L. Magerl, H. Schmiedmayer, P. Lugner, H. Schretter:
"Dynamic Skiing: Influences of Snow and Ski Properties";
in: "IV World Congress of Biomechanics",
World Congress Biomechanics,
2002,
S. 1
- 2.
-
A. Byagowi, P. Kopacek:
"Using a humanoid robot for demining land mines";
in: "Proceedings of the 18th IFAC Conference 2009",
herausgegeben von: IFAC;
Elsevier Science Publishers B.V.,
Amsterdam,
2009,
S. 98
- 102.
Zusätzliche Informationen
-
A. Byagowi, P. Kopacek, J. Baltes:
""Archie": A Cost Oriented Humanoid Robot";
in: ""Archie": A Cost Oriented Humanoid Robot",
herausgegeben von: IFAC;
Elsevier Science Publishers B.V.,
Milano,
2011,
S. 12692
- 12696.
Zusätzliche Informationen
-
F. Dohnal:
"Fourier Analysis of Suppression of Self-Excited Vibrations by Parametric Excitation";
in: "Proc. of Euromech Colloquium 457 on Nonlinear Modes of Vibrating Systems",
S. Bellizzi, B. Cochelin, C.-H. Lamarque (Hrg.);
ENTPE (Ecole Nationale des Travaux Publics de l'Etat),
Vaulx en Velin, France,
2004,
ISBN: 2-86834-119-5,
S. 45
- 48.
-
F. Dohnal, H. Ecker:
"Suppressing Self-Excited Vibrations in a Coupled Pendulum System";
in: "Proceedings of the XXI International Congress of Theoretical and Applied Mechanics",
W. Gutkowski, T.A. Kowalewski (Hrg.);
IPPT PAN,
Warszawa,
2004,
ISBN 83-89697-01-1,
Paper-Nr. SM25S_12026,
2 S.
-
F. Dohnal, H. Ecker, A. Tondl:
"Vibration Control of Self-Excited Oscillations by Parametric Stiffness Excitation";
in: "Proc. of the Eleventh International Congress of Sound and Vibration",
N.I. Ivanov, M.J. Crocker (Hrg.);
International Institute of Acoustics and Vibration,
Auburn,
2004,
ISBN: 5-7325-0816-3,
S. 339
- 346.
-
M. Dugolli, P. Kopacek:
"Identification of Commercial Losses in Electrical Power System in Kosovo";
in: "Proceedings Workshop on Supplemental Ways for Improving International Stability (SWIIS 2010) Prishtina, Kosovo, October 27-29, 2010",
herausgegeben von: International Federation of Automatic Control (IFAC);
Elsevier Science Publishers B.V.,
Amsterdam,
2010,
S. 107
- 110.
Zusätzliche Informationen
-
H. Ecker:
"A parametric absorber for friction-induced vibrations";
in: "CD-Proc. of 2003 ASME Design Engineering Technical Conferences",
ASME,
2003,
ISBN: 0-7918-3698-3,
9 S.
-
H. Ecker:
"Equivalent Damping Obtained from Parametric Stiffness Excitation";
in: "Proc. of Euromech Colloquium 457 on Nonlinear Modes of Vibrating Systems",
S. Bellizzi, B. Cochelin, C.-H. Lamarque (Hrg.);
ENTPE (Ecole Nationale des Travaux Publics de l'Etat),
Vaulx en Velin, France,
2004,
ISBN: 2-86834-119-5,
S. 131
- 134.
-
H. Ecker:
"Parametric stiffness excitation as a means for vibration suppression";
in: "Vibration Problems ICOVP 2005",
E. Inan, A. Kiris (Hrg.);
Springer-Verlag,
Dordrecht, The Netherlands,
2007,
ISBN: 978-1-4020-5400-6,
S. 163
- 174.
Zusätzliche Informationen
-
H. Ecker:
"Schwingungsbeeinflussung durch Parametererregung - Stand der Technik, Einsatzmöglichkeiten und Entwicklungstrends";
in: "VDI-Fachtagung Schwingungen 2017",
VDI Verlag GmbH,
Düsseldorf,
2017, (eingeladen),
ISBN: 978-3-18-092295-9,
S. 261
- 270.
Zusätzliche Informationen
-
H. Ecker, T. Pumhössel:
"Experimental results on parametric excitation damping of an axially loaded cantilever beam";
in: "Proceedings 2009 ASME International Design Engineering Technical Conferences",
herausgegeben von: ASME;
ASME,
2009,
ISBN: 978-0-7918-3856-3,
Paper-Nr. DETC2009-86555,
10 S.
Zusätzliche Informationen
-
H. Ecker, T. Pumhössel, A. Tondl:
"A Study on Parametric Excitation for Suppressing Self-Excited Rotor Vibrations";
in: "Proceedings Sixth International Conference on Rotor Dynamics",
IFToMM,
2002,
ISBN: 0-7334-1963-1,
S. 85
- 92.
Zusätzliche Informationen
-
H. Ecker, H. Springer:
"Suppression of self-excited vibrations in drive trains";
in: "Ninth International Conference on Vibrations in Rotating Machinery",
herausgegeben von: IMechE - Institution of Mechanical Engineers;
Chandos Publishing Ltd.,
Oxford,
2008,
ISBN: 978-1-84334-458-2,
S. 371
- 382.
Zusätzliche Informationen
-
H. Ecker, M. Tauchner:
"Experimental results obtained from a rotor with intermittent stator contact";
in: "Dynamics of Machines 2003 - Proceedings",
I. Dobias (Hrg.);
Czech Committee of the EUROMECH Society,
Praha,
2003,
ISBN: 80-85918-81-1,
S. 35
- 42.
Zusätzliche Informationen
-
H. Ecker, M. Tauchner:
"Experimentelle Untersuchung von Anstreifvorgängen mit einem Rotorprüfstand";
in: "Schwingungen in rotierenden Maschinen VI",
H. Irretier, R. Nordmann, H. Springer (Hrg.);
Friedr. Vieweg & Sohn Verlagsgesellschaft,
Braunschweig/Wiesbaden,
2003,
ISBN: 3-528-03956-6,
S. 71
- 80.
-
H. Ecker, A. Tondl:
"On the suppression of flow-generated self-excited vibrations of a valve";
in: "Vibration Problems ICOVP 2011",
Springer-Verlag,
2011,
ISBN: 978-94-007-2068-8,
S. 281
- 286.
-
H. Ecker, A. Tondl:
"Stabilization of a rigid rotor by a time-varying stiffness of the bearing mounts";
in: "Vibrations in Rotating Machinery",
herausgegeben von: IMechE (Institution of Mechanical Engineers);
Professional Engineering Publishing Limited,
Suffolk, UK,
2004,
ISBN: 1-86058-447-0,
S. 45
- 54.
-
M. Fallmann, L. Böhler, M. Kozek:
"Linear Model Predictive Control of Small-Scale Furnaces";
in: "Sciene.Research.Pannonia",
24;
herausgegeben von: Department Energie-Umweltmanagement;
Leykam Buchverlagsgesellschaft mbH.,
Graz,
2020,
ISBN: 978-3-7011-0460-4,
S. 281
- 287.
Zusätzliche Informationen
-
S. Gombots, M. Kaltenbacher, B. Kaltenbacher:
"Inverse scheme for acoustic source localization in 3D";
in: "Euronoise 2018 Crete",
herausgegeben von: Michael Taroudakis;
Tagungsband,
2018,
ISSN: 2226-5147,
S. 2597
- 2602.
-
A.L. Gratzer, A. Schirrer, E. Thonhofer, F. Pasic, S. Jakubek, C. Mecklenbräuker:
"Short-Term Collision Estmation by Stochastic Predictions in Multi-Agent Intersection Traffic";
angenommen für: "Proc. of the International Conference on Electrical, Computer and Energy Technologies (ICECET 2022)",
herausgegeben von: IEEE;
IEEE Xplore,
Prague,
2022,
S. 1
- 6.
Zusätzliche Informationen
-
E. Hajrizi, L. Stapleton, P. Kopacek:
"The contribution of UBT for the sustainable development of Kosovo";
in: "Proceedings Workshop on Supplemental Ways for Improving International Stability (SWIIS 2010) Prishtina, Kosovo, October 27-29, 2010",
herausgegeben von: International Federation of Automatic Control (IFAC);
Elsevier Science Publishers B.V.,
Amsterdam,
2010,
ISBN 978-3-902661-92-0/11/$20.00 © 2010 IFAC,
S. 1
- 6.
Zusätzliche Informationen
-
M. Hirschmanner:
"Adaptive Kompensation von zirkulatorischen Anregungen am Beispiel eines 2FG-Rotors";
in: "Schwingungen in rotierenden Maschinen VI",
H. Irretier, R. Nordmann, H. Springer (Hrg.);
Friedr. Vieweg & Sohn Verlagsgesellschaft,
Braunschweig/Wiesbaden,
2003,
ISBN: 3-528-03956-6,
S. 61
- 69.
Zusätzliche Informationen
-
A. Hüppe, J. Grabinger, M. Kaltenbacher, A. Reppenhagen, G. Dutzler, W. Kühnel:
"A Non-Conforming Finite Element Method for Computational Aeroacoustics in Rotating Systems";
in: "20th AIAA/CEAS Aeroacoustics Conference",
herausgegeben von: American Institute of Aeronautics and Astronautics;
AIAA,
2014,
11 S.
-
A. Humer, E. Hansy-Staudigl, M. Krommer:
"Nonlinear electro-elasticity for piezoelectric materials and structures using a multiplicative decomposition of the deformation gradient";
in: "Proc. of VIII ECCOMAS Thematic Conference on Smart Structures and Materials - SMART 2017",
A. Güemes, A. Benjeddou, J. Rodellar, J. Leng (Hrg.);
CIMNE,
2017,
12 S.
Zusätzliche Informationen
-
A. Humer, M. Krommer:
"The role of strain measures in the modeling of piezoelectric materials based on a multiplicative decomposition of the deformation gradient";
in: "Proc. of the 6th ECCOMAS Thematic Conference on Smart Structures and Materials (SMART 2013), June 24-26th, 2013, Torino, Italy",
E. Carrera, F. Miglioretti, M. Petrolo (Hrg.);
Politecnico di Torino,
2013,
16 S.
-
H Irschik, M. Krommer:
"A Review on Static and Dynamic Shape Control of Structures: The Period 2002-2012";
in: "Proc. of the Vienna Congress on Recent Advances in Earthquake Engineering and Structural Dynamics 2013 (VEESD 2013), August 28-30th, 2013, Vienna, Austria",
C. Adam, R. Heuer, W. Lenhardt, Ch. Schranz (Hrg.);
TU Wien,
2013,
10 S.
-
M. Jirout, P. Lugner, W. Mack:
"Dynamic simulation of the contact forces in the transmission link of a magnetic track-brake in low suspension";
in: "10th Mini conference on vehicle system dynamics, identification and anomalies",
Vehicle system dynamics, identification and anomalies (VSDIA),
Budapest,
2008,
S. 199
- 206.
-
R. Jurisits, A. Steindl:
"Degenerate cases of stability loss of an elastic fluid-conveying tube";
in: "PAMM",
H.-D. Alber, N. Kraynyukova, C. Tropea (Hrg.);
herausgegeben von: Darmstadt;
Wiley-VCH,
Weinheim,
2012,
S. 257
- 258.
Zusätzliche Informationen
-
M. Kaltenbacher, S. Schoder:
"Aeroacoustic formulation for flow-acoustic feedback";
in: "25rd AIAA/CEAS Aeroacoustics conference",
AIAA,
2019,
ISBN: 978-1-62410-588-3.
Zusätzliche Informationen
-
T. Kniffka, H. Ecker:
"Observations regarding numerical results obtained by the Floquet-method";
in: "Proceedings DETC2013",
herausgegeben von: ASME;
ASME,
New York,
2013,
Paper-Nr. DETC2013-13292,
10 S.
Zusätzliche Informationen
-
B. Kopacek, P. Kopacek:
"End of Life Management";
in: "Proceedings of the 14th IFAC Symposium on Information Control Problems in Manufacturing",
herausgegeben von: IFAC;
Elsevier Science Publishers B.V.,
Amsterdam,
2012,
S. 534
- 539.
Zusätzliche Informationen
-
B. Kopacek, P. Kopacek:
"Extracting rare materials from electr(on)ic scrap";
in: "Proceedings of the 16th IFAC Conference on Technology, Culture and International Stability TECIS 2015",
Volume 48, Issue 24,;
P. Kopacek et al. (Hrg.);
herausgegeben von: International Federation of Automatic Control - IFAC;
Elsevier Science Publishers B.V.,
Netherlands,
2015,
ISSN: 2405-8963,
S. 157
- 161.
Zusätzliche Informationen
-
P. Kopacek:
"Automation and TECIS";
in: "Proceedings of the 16th IFAC Conference on Technology, Culture and International Stability TECIS 2015",
Volume 48, Issue 24,;
P. Kopacek et al. (Hrg.);
herausgegeben von: International Federation of Automatic Control - IFAC;
Elsevier Science Publishers B.V.,
Netherlands,
2015,
ISSN: 2405-8963,
S. 021
- 027.
Zusätzliche Informationen
-
P. Kopacek:
"Development Trends in Cost Oriented Production Automation";
in: "18th IFAC Conference on Technology, Culture and International Stability TECIS 2018",
51;
P. Kopacek, B. Ibrahimov (Hrg.);
herausgegeben von: International Federation of Automatic Control - IFAC;
IFAC-PapersOnLine,
Netherlands,
2018,
S. 39
- 43.
Zusätzliche Informationen
-
P. Kopacek:
"Development Trends in Robotics";
in: "Proceedings 17th IFAC Conference on International Stability, Technology and Culture TECIS 2016",
IFAC Papers On line, Vol.49, Issue 29;
herausgegeben von: International Federation of Automatic Control, IFAC;
Elsevier Science Publishers B.V.,
2016,
S. 36
- 41.
Zusätzliche Informationen
-
P. Kopacek:
"Ethical and Social Aspects of Robots";
in: "IFAC World Congress 2014",
herausgegeben von: International Federation of Automatic Control, IFAC;
Elsevier Science Publishers B.V.,
Amsterdam,
2014,
ISBN: 978-3-902823-62-5,
S. 11425
- 11430.
Zusätzliche Informationen
-
P. Kopacek:
"Higher Education in Engineering Management with impacts of TECIS";
in: "Proceedings of TECIS 2019",
ifac-papersonline/vol/52/issue/2;
P. Kopacek, L. Stapleton, A. Topalov (Hrg.);
herausgegeben von: International Federation of Automatic Control - IFAC;
Elsevier Science Publishers B.V.,
Holland,
2019,
S. 164
- 167.
Zusätzliche Informationen
-
P. Kopacek:
"Knowledge Transfer Centres and Education for Innovation and Technology Management";
in: "Proceedings 15th Workshop on International Stability, Technology, and Culture",
herausgegeben von: IFAC;
Elsevier Science Publishers B.V.,
2013,
S. 133
- 136.
Zusätzliche Informationen
-
P. Kopacek:
"Robo-Ethics A Survey of developments in the field and their implications for social effects";
in: "Proceedings of TECIS 2019",
IFAC PapersOnLine 52-25;
P. Kopacek, L. Stapleton, A. Topalov (Hrg.);
herausgegeben von: International Federation of Automatic Control - IFAC;
Elsevier B.V.,
Netherlands,
2019,
S. 131
- 135.
Zusätzliche Informationen
-
P. Kopacek:
"Roboethics";
in: "Proceedings of the IFAC Workshop on International Stability and Systems Engineering 2012",
herausgegeben von: IFAC;
Elsevier Science Publishers B.V.,
Amsterdam,
2012,
S. 67
- 72.
Zusätzliche Informationen
-
P. Kopacek:
"The IFAC TC SWIIS the last 3 years";
in: "Proceedings of the IFAC Workshop SWIIS 2010",
herausgegeben von: IFAC;
Elsevier Science Publishers B.V.,
2010,
S. 1
- 6.
Zusätzliche Informationen
-
P. Kopacek:
"Trends in Production Automation";
in: "Proceedings of TECIS 2019",
IFAC PapersOnLine 52-25;
P. Kopacek, L. Stapleton, A. Topalov (Hrg.);
herausgegeben von: International Federation of Automatic Control - IFAC;
Elsevier B.V.,
Netherlands,
2019,
S. 509
- 512.
Zusätzliche Informationen
-
P. Kopacek, J. Baltes, M. Schörghuber:
"A Cost Oriented Humanoid Robot Motion Control System";
in: "IFAC World Congress 2014",
herausgegeben von: International Federation of Automatik Control, IFAC;
Elsevier Science Publishers B.V.,
Amsterdam,
2014,
ISBN: 978-3-902823-62-5,
S. 4529
- 4534.
Zusätzliche Informationen
-
P. Kopacek, N. Chivarov et al.:
"Cost Oriented Humanoid Robot communication with IoT devices via MQTT and interaction with a Smart Home HUB connected devices";
in: "Proceedings of TECIS 2019",
IFAC PapersOnLine 52-25;
P. Kopacek, L. Stapleton, A. Topalov (Hrg.);
herausgegeben von: International Federation of Automatic Control - IFAC;
Elsevier B.V.,
Netherlands,
2019,
S. 104
- 109.
Zusätzliche Informationen
-
P. Kopacek, M. Doyle Kent:
"Do We Need Synchronization of the Human and Robotics to Make Industry 5.0 a Success Story?";
in: "ISPR 2020,",
M.N. Durakbasa (Hrg.);
Springer Nature Switzerland AG,
AG,
2020,
S. 302
- 311.
Zusätzliche Informationen
-
P. Kopacek, M. Doyle Kent:
"Social and Ethical Aspects of Automation";
in: "ISPR 2020",
herausgegeben von: N. M. Durakbasa and M. G. Gençyılmaz;
Springer Nature Switzerland AG,
AG,
2020,
S. 363
- 372.
Zusätzliche Informationen
-
P. Kopacek, M. Doyle-Kent:
"Industry 5.0: Is the Manufacturing Industry on the cusp of a new revolution?";
in: "Proceedings of the International Symposium for Production Research, ISPR 2019",
Lecture Notes in Mechanical Engineering;
M.N. Durakbasa et al. (Hrg.);
herausgegeben von: ISPR;
Springer International Publishing AG,
Wien,
2019,
ISBN: 978-3-030-31342-5,
S. 432
- 441.
Zusätzliche Informationen
-
P. Kopacek, M. Doyle-Kent et al.:
"Cost Oriented robotic arm optimised to aid independence";
in: "Proceedings of TECIS 2019",
IFAC PapersOnLine 52-25 (2019);
herausgegeben von: International Federation of Automatic Control - IFAC;
Elsevier B.V.,
Netherlands,
2019,
S. 125
- 130.
Zusätzliche Informationen
-
P. Kopacek, M. Doyle-Kent et al.:
"Integrating Education into Maintenance Operations: an Irish case study";
in: "Proceedings of TECIS 2019",
IFAC PapersOnLine 52-25;
P. Kopacek, L. Stapleton, A. Topalov (Hrg.);
herausgegeben von: International Federation of Automatic Control - IFAC;
Elsevier B.V.,
Netherlands,
2019,
S. 415
- 420.
Zusätzliche Informationen
-
P. Kopacek, M. Doyle-Kent et al.:
"Where are all the Irish women engineers: a case study";
in: "Proceedings of TECIS 2019",
IFAC PapersOnLine 52-25;
P. Kopacek, L. Stapleton, A. Topalov (Hrg.);
herausgegeben von: International Federation of Automatic Control - IFAC;
Elsevier B.V.,
Netherlands,
2019,
S. 136
- 141.
Zusätzliche Informationen
-
P. Kopacek, F. d`Àpolito, X. Mehmeti:
"Control of a cost oriented humanoid robot";
in: "Proceedings 17th IFAC Conference on International Stability, Technology and Culture TECIS 2016",
Volume 49, Issue 29;
herausgegeben von: International Federation on Automatic Control, IFAC;
Elsevier Science Publishers B.V.,
2016,
S. 18
- 23.
Zusätzliche Informationen
-
P. Kopacek et al.:
"Communication of Cost Oriented Humanoid Robots";
in: "Proceedings of TECIS 2019",
IFAC PapersOnLine 52-25;
P. Kopacek, L. Stapleton, A. Topalov (Hrg.);
herausgegeben von: International Federation of Automatic Control - IFAC;
Elsevier Science Publishers B.V.,
Netherlands,
2019,
S. 100
- 103.
Zusätzliche Informationen
-
P. Kopacek et al.:
"Cost Oriented Tele-Controlled Service Robot for Increasing the Quality of Life of Elderly and Disabled - ROBCO 18";
in: "18th IFAC Conference on Technology, Culture and International Stability TECIS 2018",
30;
P. Kopacek, B. Ibrahimov (Hrg.);
herausgegeben von: IFAC (International Federation of Automatic Control) Hosting by Elsevier Ltd.;
IFAC-PapersOnLine,
Netherlands,
2018,
S. 192
- 197.
Zusätzliche Informationen
-
P. Kopacek, E. Hajrizi:
"Engineering Management in Kosovo";
in: "IFAC World Congress 2014",
herausgegeben von: International Federation of Automatic Control, IFAC;
Elsevier Science Publishers B.V.,
Amsterdam,
2014,
ISBN: 978-3-902823-62-5,
S. 9875
- 9879.
Zusätzliche Informationen
-
P. Kopacek, E. Hajrizi, X. Mehmeti:
"Cost Oriented Control of Humanoid Robots";
in: "Proceedings of TECIS 2019",
IFAC PapersOnLine 52-25 (2019);
P. Kopacek, L. Stapleton, A. Topalov (Hrg.);
herausgegeben von: International Federation of Automatic Control - IFAC;
Elsevier Science Publishers B.V.,
Netherlands,
2019,
S. 87
- 90.
Zusätzliche Informationen
-
P. Kopacek, E. Hajrizi, L. Stapleton:
"From Engineering to Mechatronics Management";
in: "Proceedings 15th Workshop on International Stability, Technology, and Culture",
herausgegeben von: IFAC;
Elsevier Science Publishers B.V.,
2013,
S. 1
- 4.
Zusätzliche Informationen
-
P. Kopacek, B. Kopacek:
"End of Life Management of Automation and IT Devices";
in: "IFAC World Congress 2014",
herausgegeben von: International Federation of Automatic Control, IFAC;
Elsevier Science Publishers B.V.,
Amsterdam,
2014,
ISBN: 978-3-902823-62-5,
S. 3503
- 3508.
Zusätzliche Informationen
-
P. Kopacek, T. Magyar, L. Silberbauer:
"Humi - A mobile robot for Landmine Detection";
in: "10th IFAC Symposium on Robot Control",
herausgegeben von: IFAC;
Elsevier Science Publishers B.V.,
2012,
S. 828
- 833.
Zusätzliche Informationen
-
P. Kopacek, X. Mehmeti, B. Karahoda:
"Walking trajectory modeling of biped robot "Archi" for stable walking";
in: "Proceedings 17th IFAC Conference on International Stability, Technology and Culture TECIS 2016",
IFAC-PapersOnLine, Volume 49, Issue 29;
herausgegeben von: International Federation on Automatic Control, IFAC;
Elsevier Science Publishers B.V.,
2016,
S. 83
- 87.
Zusätzliche Informationen
-
P. Kopacek, N. Preniqi, M. Gërvalla:
"Investigate PLM Presence - Case study of Kosovo and Albania";
in: "18th IFAC Conference on Technology, Culture and International Stability TECIS 2018",
30;
herausgegeben von: International Federation of Automatic Control - IFAC;
Elsevier B.V.,
Netherlands,
2018,
S. 302
- 307.
Zusätzliche Informationen
-
P. Kopacek, N. Preniqi, M. Gërvalla:
"IT Infrastructure Library (ITIL) framework approach to IT Governance";
in: "18th IFAC Conference on Technology, Culture and International Stability TECIS 2018",
30;
P. Kopacek, B. Ibrahimov (Hrg.);
herausgegeben von: IFAC International Federation of Automatic Control) Hosting by Elsevier Ltd.;
Elsevier Ifac Papersonline,
Netherlands,
2018,
S. 181
- 185.
Zusätzliche Informationen
-
P. Kopacek, I. Rexha:
"Electronic Waste Management in Kosovo an important Contribution for Stability";
in: "Proceedings of the IFAC Workshop SWIIS 2010",
herausgegeben von: IFAC;
Elsevier Science Publishers B.V.,
2010,
S. 59
- 64.
Zusätzliche Informationen
-
P. Kopacek, M. Shala, K. Ismaili, F. Sylaj:
"Research and Education with Scrap";
in: "Proceedings 15th Workshop on International Stability, Technology, and Culture",
herausgegeben von: IFAC;
Elsevier Science Publishers B.V.,
2013,
S. 16
- 20.
Zusätzliche Informationen
-
P. Kopacek, L. Stapleton:
"Engineering Management Postgraduate Programs in Kosovo: A Contribution to International Stability";
in: "Proceedings Workshop on Supplemental Ways for Improving International Stability (SWIIS 2010) Prishtina, Kosovo, October 27-29, 2010",
herausgegeben von: International Federation of Automatic Control (IFAC);
Elsevier Science Publishers B.V.,
Amsterdam,
2010,
S. 111
- 116.
Zusätzliche Informationen
-
P. Kopacek, L. Stapleton, E. Hajrizi:
"Don´t Waste a Good Disaster: A Systems Approach to an Ethics of International Institutional Failures";
in: "IFAC World Congress 2014",
herausgegeben von: International Federation of Automatic Control, IFAC;
Elsevier Science Publishers B.V.,
Amsterdam,
2014,
ISBN: 978-3-902823-62-5,
S. 11419
- 11424.
Zusätzliche Informationen
-
J. Kopriva, J. Kunovsky, F. Kocina, V. Satek, E. Talic:
"Numerical integration in the RNS";
in: "The Proceedings of the 12th Conference Informatics'2013",
herausgegeben von: TU Kosice;
Kosice, FEI TU v Kosiciach,
Kosice,
2013,
ISBN: 978-80-8143-127-2,
5 S.
Zusätzliche Informationen
-
J. Kopriva, J. Kunovsky, V. Satek, M. Drozdova, A. Schirrer:
"Parallel Computations Based on Automatic Transformation of Ordinary Differential Equations";
in: "AIP Conference Proceedings",
herausgegeben von: AIP Publishing;
AIP Proceedings,
2013,
ISBN: 978-0-7354-1184-5,
S. 2293
- 2296.
Zusätzliche Informationen
-
J. Kunovsky, V. Satek, V. Vopenka, A. Schirrer:
"Stiffness in technical initial problems";
in: "AIP Conference Proceedings 1479: NUMERICAL ANALYSIS AND APPLIED MATHEMATICS ICNAAM 2012: International Conference of Numerical Analysis and Applied Mathematics",
American Institute of Physics,
College Park, MD, USA,
2012,
ISBN: 978-0-7354-1091-6,
S. 2221
- 2224.
Zusätzliche Informationen
-
R. Lernbeiss, M. Plöchl, P. Lugner:
"Simulation of gear-walk phenomena on aircraft landing gears";
in: "10th Mini Conference on vehicle system dynamics, identification and anomalies",
Vehicle system dynamics, identification and anomalies (VSDIA),
Budapest,
2008,
S. 31
- 46.
-
A. Leukauf, A. Schirrer, E. Talic:
"Fourier Galerkin Approach to Wave Equation with Absorbing Boundary Conditions";
in: "International Journal of Mathematical and Computational Sciences",
11 (8);
herausgegeben von: World Academy of Science, Engineering and Technology;
World Academy of Science, Engineering and Technology,
2017,
S. 366
- 371.
Zusätzliche Informationen
-
B. Lewoc, A. Izworski, S. Skowronski, A. Kieleczawa, M. Hersh, P. Kopacek:
"Some social impacts of ICT in automation: A case study of Poland";
in: "Proceedings of the IFAC Workshop on International Stability and Systems Engineering 2012",
herausgegeben von: IFAC;
Elsevier Science Publishers B.V.,
Amsterdam,
2012,
S. 85
- 90.
Zusätzliche Informationen
-
B. Lewoc, A. Izworski, S. Skowronski, A. Kieleczawa, M. Hersh, P. Kopacek:
"Technology Change and Transfer Costs: A Case Study of Poland";
in: "Proceedings Workshop on Supplemental Ways for Improving International Stability (SWIIS 2010) Prishtina, Kosovo, October 27-29, 2010",
herausgegeben von: International Federation of Automatic Control (IFAC);
Elsevier Science Publishers B.V.,
Amsterdam,
2010,
S. 41
- 46.
Zusätzliche Informationen
-
B. Lewoc, A. Izworski, S. Skowronski, A. Kieleczawa, M. Hersh, P. Kopacek, L. Stapleton:
"Optimal Management Network Topology in a CIMM System The General Case";
in: "Proceedings 15th Workshop on International Stability, Technology, and Culture",
herausgegeben von: IFAC;
Elsevier Science Publishers B.V.,
2013,
S. 54
- 59.
Zusätzliche Informationen
-
J. Linert, P. Kopacek:
"Humanoid robots - Robotainment";
in: "18th IFAC Conference on Technology, Culture and International Stability TECIS 2018",
30;
herausgegeben von: International Federation of Automatic Control - IFAC;
IFAC-PapersOnLine,
Netherlands,
2018,
S. 220
- 225.
Zusätzliche Informationen
-
J. Linert, P. Kopacek:
"Robots for Education (Edutainment)";
in: "Proceedings 17th IFAC Conference on International Stability, Technology and Culture TECIS 2016",
49;
P. Kopacek, E. Hajrizi (Hrg.);
herausgegeben von: International Federation of Automatic Control, IFAC;
Elsevier Science Publishers B.V.,
2016,
S. 24
- 29.
Zusätzliche Informationen
-
P. Lugner:
"Tyre Models for Vehicle Dynamics Analysis";
in: "Tyre Models for Vehicle Dynamics Simulation",
herausgegeben von: Seminar der Carl-Cranz-Gesellschaft;
Carl-Cranc-Gesellschaft e.V.,
Weßling, D,
2004, (eingeladen).
-
K. Makihara, H. Ecker:
"Comparison of open-loop stiffness control methods to suppress self-excitation vibrations";
in: "Proc. of Industrial Simulation Conference 2003",
J.C. Guerri, A. Pajares, C. Palau (Hrg.);
Eurosis,
Ghent,
2003,
ISBN: 90-77381-03-1,
S. 180
- 187.
-
K. Makihara, J. Onoda:
"Semi-active vibration suppression of space structures based on energy-recycling method";
in: "Dynamics of Machines 2003 - Proceedings",
I. Dobias (Hrg.);
Czech Committee of the EUROMECH Society,
Prague,
2003,
ISBN: 80-85918-81-1,
S. 97
- 102.
-
M. Masoumian, P. Kopacek:
"End-of-Life Management of Photovoltaic Modules";
in: "Proceedings of the 16th IFAC Conference on Technology, Culture and International Stability TECIS 2015",
Volume 48, Issue 24,;
P. Kopacek et al. (Hrg.);
herausgegeben von: International Federation of Automatic Control - IFAC;
Elsevier Science Publishers B.V.,
Netherlands,
2015,
ISSN: 2405-8963,
S. 162
- 167.
Zusätzliche Informationen
-
J. Pargfrieder, H. Jörgl:
"An integrated control system for optimising the energy consumption and user comfort in buildings";
in: "IEEE International Conference on Control Applications",
herausgegeben von: IEEE;
IEEE,
Glasgow, Scotland,
2002,
S. 127
- 132.
Zusätzliche Informationen
-
B. Petermeier, H. Springer:
"Active bearing unit for damping of bending vibrations in rotating machinery";
in: "Ninth International Conference on Vibrations in Rotating Machinery",
herausgegeben von: IMechE - Institution of Mechanical Engineers;
Chandos Publishing Ltd.,
Oxford,
2008,
ISBN: 978-1-84334-458-2,
S. 733
- 743.
Zusätzliche Informationen
-
Ch. Pittner, J. Edelmann, M. Plöchl:
"Reference models for torque-vectoring electric vehicles";
in: "16th Mini Conference on Vehicle system dynamics, identification and anomalies (VSDIA 2018)",
Vehicle system dynamics, identification and anomalies (VSDIA),
Budapest,
2019,
ISBN: 978-963-421-804-3,
S. 23
- 30.
-
W. Poth, M. Matzl, W. Auzinger, A. Steindl, H. Troger:
"Comparison of Displacement Versus Natural Variables for the Numerical Simulation of a String Pendulum";
in: "Nonlinear Dynamics, Chaos, Control and Their Applications to Engineering Sciences",
J. Balthazar, P. Goncalves, R. Brasil, I. Caldas, F. Rizatto (Hrg.);
American Academy of Mechanics,
5,
2002,
S. 127
- 136.
Zusätzliche Informationen
-
T. Pumhössel, H. Ecker:
"Active damping of vibrations of a cantilever beam by axial force control";
in: "Proceedings 2007 ASME International Design Engineering Technical Conferences",
ASME,
2007,
ISBN: 0-7918-3806-4,
Paper-Nr. DETC2007-34638,
11 S.
Zusätzliche Informationen
-
H. Rossmanith:
"A historical retrospective of the beginnings of brittle fracture mechanics - The period 1907-1947";
in: "Fracture of Nano and Engineering Materials and Structures",
herausgegeben von: European Group of Fracture, E.E. Gdoutos;
Springer-Verlag,
Dordrecht, The Netherlands,
2006, (eingeladen),
ISBN: 1-4020-4971-4,
S. 27
- 28.
-
H. Rossmanith:
"Wie hätten Sie's gern: Mehr oder weniger Pulver? Oder: Was passiert beim Sprengen in der Umgebung des Bohrloches?";
in: "Fachtagung für Sprengtechnik",
WIFI Oberösterreich,
Linz,
2002,
S. 1
- 15.
-
H. Rossmanith, V. Hochholdinger-Arsic, K. Uenishi:
"Understanding size and boundary effects in scaled model blasts - plane problems";
in: "Fragblast",
Taylor & Francis Group,
2005,
S. 93
- 125.
Zusätzliche Informationen
-
P Saleh, H. Ecker, K Schwieger, M. Neumann, I Erdelean:
"Gathered riding dynamics data for semi-automated risk assessment of roads";
in: "Proceedings of 7th Transport Research Arena TRA 2018",
Transport Research Arena,
2018,
10 S.
Zusätzliche Informationen
-
A. Schirrer, G. Aschauer, S. Jakubek:
"Comparison of real-time models for high-fidelity hardware-in-the-loop catenary emulation in a high-dynamic pantograph test rig";
in: "X International Conference on Structural Dynaics, EURODYN 2017",
199;
herausgegeben von: Procedia Engineering;
Elsevier,
2017,
S. 3290
- 3295.
Zusätzliche Informationen
-
S. Schoder, C. Freidhager, M. Kaltenbacher:
"Helmholtz decomposition of compressible flow data at Mach 0.8";
in: "Proceedings in Applied Mathematics & Mechanics",
Wiley-VCH,
2019.
-
S. Schoder, C. Freidhager, M. Kaltenbacher:
"Investigation of conservative source term interpolation applied to aeroacoustics";
in: "The 49th International Congress and Exhibition on Noise Control Engineering",
International Institute of Noise Control Engineering,
2019, (eingeladen).
Zusätzliche Informationen
-
S. Schoder, C. Junger, M. Weitz, M. Kaltenbacher:
"Conservative source term interpolation for hybrid aeroacoustic computations";
in: "25rd AIAA/CEAS Aeroacoustics conference",
AIAA,
2019,
ISBN: 978-1-62410-588-3.
Zusätzliche Informationen
-
S. Schoder, M. Kaltenbacher, K. Roppert:
"Helmholtz's Decomposition applied to Aeroacoustics";
in: "25rd AIAA/CEAS Aeroacoustics conference",
AIAA,
2019,
ISBN: 978-1-62410-588-3.
Zusätzliche Informationen
-
S. Schoder, K. Roppert, M. Kaltenbacher:
"Aeroacoustic formulation based on compressible flow data applying Helmholtz´s decomposition";
in: "Waves 2019",
herausgegeben von: TU Wien;
Institut für Mechanik und Mechatronik, Technische Universität Wien,
Wien,
2019, (eingeladen),
S. 150
- 151.
Zusätzliche Informationen
-
A. Schulz, A. Gamez Sangra, M. Neumann, J. Wassermann:
"Modeling and simulation of a sophisticated active magnetic bearing system with supreme reliability";
in: "Proceedings of 10th International Conference on the Theory of Machines and Mechanisms",
M. Bilek, J. Mrazek, M. Smolkova, P. Zabka (Hrg.);
Technical University of Liberec,
Liberec, Czech Republic,
2008,
ISBN: 978-80-7372-370-5,
S. 525
- 530.
Zusätzliche Informationen
-
M. Schwarzbart, A. Steindl:
"Buckling of a non-Euclidean annular plate";
in: "Issue PAMM PAMM Special Issue: 82nd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM)",
G. Brenn, G. Holzapfel, M. Schanz, O. Steinbach (Hrg.);
herausgegeben von: GAMM;
Wiley-VCH,
2011,
2 S.
Zusätzliche Informationen
-
K Schwieger, P Saleh, A. Hula, H. Ecker, M. Neumann:
"viaMotorrad - Can motorcycle safety be measured?";
in: "Proceedings of the 12th International Motorcycle Conference 2018",
herausgegeben von: Institut für Zweiradsicherheit e.V.;
Institut für Zweiradsicherheit e.V.,
2018,
ISSN: 0175-2626,
15 S.
Zusätzliche Informationen
-
P. Smolek, B. Heinzl, H. Ecker, F. Breitenecker:
"Exploring the Possibilities of Co-Simulation with CATIA V6 Dynamic Behavior Modeling";
in: "ERK - International Electrotechnical and Computer Science Conference",
Andrej Zemva (Hrg.);
herausgegeben von: University of Ljubljana;
ERK - International Electrotechnical and Computer Science Conference,
Portoroz,
2013,
S. 177
- 180.
Zusätzliche Informationen
-
L. Spahiu, P. Kopacek:
"Strategic Planning in Small and Medium Enterprises at Tourism Sector in Kosovo";
in: "Proceedings Workshop on Supplemental Ways for Improving International Stability (SWIIS 2010) Prishtina, Kosovo, October 27-29, 2010",
herausgegeben von: International Federation of Automatic Control (IFAC);
Elsevier Science Publishers B.V.,
Amsterdam,
2010,
S. 123
- 128.
Zusätzliche Informationen
-
H. Springer, S. Kovyrshin:
"Active parametric vibration control of a smart beam";
in: "Vibrations in Rotating Machinery",
herausgegeben von: IMechE (Institution of Mechanical Engineers);
Professional Engineering Publishing Limited,
Suffolk, UK,
2004,
ISBN: 1-86058-447-0,
S. 703
- 712.
-
M. Stadlbauer, N. Didcock, C. Hametner, S. Jakubek, A. Rainer, H. Koegeler:
"Online Design of Experiments in the Relevant Output Range";
in: "Design of Experiments (DoE) in Engine Development",
expert verlag,
2013,
ISBN: 978-3-8169-3217-8,
S. 43
- 58.
Zusätzliche Informationen
-
L. Stapleton, P. Kopacek:
"Control Engineering and International Stability, an Essential Agenda for IFAC";
in: "Proceedings of the 18th IFAC World Congress",
herausgegeben von: IFAC;
Elsevier Science Publishers B.V.,
Milano,
2011,
S. 3124
- 3129.
Zusätzliche Informationen
-
L. Stapleton, P. Kopacek, E. Hajrizi:
"Reflections On Third Level Accreditation In Post-Crisis Developing Countries The Case Of Kosova";
in: "IFAC Workshop SWIIS 2009",
herausgegeben von: IFAC;
Elsevier Science Publishers B.V.,
2009,
S. 18
- 23.
Zusätzliche Informationen
-
A. Steindl:
"Influence of viscous damping on friction induced travelling waves";
in: "PAMM",
H.-D. Alber, N. Kraynyukova, C. Tropea (Hrg.);
herausgegeben von: Darmstadt;
Wiley-VCH,
Weinheim,
2012,
S. 255
- 256.
Zusätzliche Informationen
-
A. Steindl:
"Study on dimension reduction methods for a fluid conveying tube";
in: "PAMM",
G. Brenn, G. A. Holzapfel, M. Schanz, O. Steinbach (Hrg.);
herausgegeben von: GAMM;
Wiley-VCH,
Weinheim,
2011,
2 S.
Zusätzliche Informationen
-
A. Steindl, W. Steiner, H. Troger:
"Optimal Control of Retrieval of a Tethered Subsatellite";
in: "SOLID MECHANICS AND ITS APPLICATIONS",
G. Rega, F Vestroni (Hrg.);
herausgegeben von: IUTAM;
Springer-Verlag,
2005,
S. 441
- 450.
-
A. Steindl, H. Troger:
"Dimension Reduction of Fluid Conveying Tubes: A Nontrivial Problem";
in: "IUTAM Symposium on Fluid-Structure Interaction in Ocean Engineering",
E. Kreuzer (Hrg.);
herausgegeben von: IUTAM;
Springer-Verlag,
Heidelberg,
2008,
ISBN: 978-1-4020-8629-8,
S. 273
- 284.
Zusätzliche Informationen
-
A. Steindl, H. Troger:
"Flüssigkeitsdurchströmte Schläuche: Ein Modellproblem einer Fluid-Struktur Instabilität";
in: "VDI Berichte Nr. 1682",
VDI Verlag GmbH,
Düsseldorf,
2002,
S. 325
- 344.
-
A. Steindl, H. Troger:
"Invariant Manifolds in the Dimension Reduction for Dissipative and Conservative Systems";
in: "Proc. of Euromech Colloquium 457 on Nonlinear Modes of Vibrating Systems",
S. Bellizzi, B. Cochelin, C.-H. Lamarque (Hrg.);
ENTPE (Ecole Nationale des Travaux Publics de l'Etat),
Vaulx en Velin, France,
2004, (eingeladen),
ISBN: 2-86834-119-5,
S. 79
- 82.
-
A. Steindl, H. Troger:
"On the stability of the sky-hook";
in: "Proceedings of the XXI International Congress of Theoretial and Applied Mechanics",
W. Gutkowski, T.A. Kowalewski (Hrg.);
IPPT PAN,
Warszawa,
2004,
ISBN: 83-89687-01-1,
Paper-Nr. SM22L_11816,
2 S.
-
D. Suzzi, T. Hörmann, A. Reisinger:
"Pneumatic transport of solid particles: simulation and validation in a circular pipe";
in: "6th International Conference on CFD in Oil & Gas, Matallurgical and Process Industries",
SINTEF Materials and Chemistry,
2008,
7 S.
-
A. Teufel, A. Steindl, H. Troger:
"Synchronization of two flow excited pendula";
in: "Communications in Nonlinear Science and Numerical Simulation",
Elsevier,
2006,
S. 577
- 594.
Zusätzliche Informationen
-
A. Tondl, H. Ecker:
"Self-excited vibration quenching using parametric excitation: The effect of an additional external excitation";
in: "Proceedings of 6th International Conference on Vibration Problems",
herausgegeben von: Technical University of Liberec;
ICOVP-2003,
Liberec, Czech Republic,
2003,
S. 1
- 6.
-
A. Tondl, R. Nabergoj, H. Ecker:
"Quenching of self-excited vibrations in a system with two unstable vibration modes";
in: "Vibration Problems ICOVP 2005",
E. Inan, A. Kiris (Hrg.);
Springer-Verlag,
Dordrecht, The Netherlands,
2007,
ISBN: 978-1-4020-5400-6,
S. 487
- 492.
Zusätzliche Informationen
-
H. Troger, A. Pissarev, A. Steindl:
"Rotational motion of a discretized buckled beam";
in: "GAMM Annual Meeting 2006 - Berlin",
herausgegeben von: GAMM;
Wiley-VCH,
Weinheim,
2006,
2 S.
Zusätzliche Informationen
-
K. Tu, M. Tsai, P. Kopacek:
"A Cost Oriented Big Humanoid Robot Designed Extra Sensor Systems";
in: "Proceedings of the 18th IFAC World Congress",
herausgegeben von: IFAC;
Elsevier Science Publishers B.V.,
Milano,
2011,
S. 12680
- 12685.
Zusätzliche Informationen
-
Y. Vetyukov, V. Eliseev, M. Krommer:
"Modeling the Dynamics of a Flexible Belt Drive Using the Equations of a Deformable String with Discontinuities";
in: "IFAC-PapersOnLine - 8th Vienna International Conferenceon Mathematical Modelling - MATHMOD 2015",
48(1);
herausgegeben von: IFAC;
Elsevier,
2015,
6 S.
Zusätzliche Informationen
-
M. Vrlic, S. Jakubek:
"Degradation Avoiding Start Up and Shut Down of Fuel Cell Stacks for Automotive Application Using Two Plant Model Predictive Control";
in: "2021 6th International Conference on Smart and Sustainable Technologies (SpliTech)",
IEEE,
2021,
ISBN: 978-953-290-112-2,
S. ##.
Zusätzliche Informationen
-
M. Vrlic, D. Ritzberger, S. Jakubek:
"Efficient and life preserving power tracking control of a proton exchange membrane fuel cell using model predictive control";
in: "2020 SICE International Symposium on Control Systems (SICE ISCS)",
IEEE,
2020,
ISBN: 978-4-907764-64-7,
S. 77
- 84.
Zusätzliche Informationen
-
J. Wassermann:
"Video Frame Synchronized Data Acquisition and Analysis Using LabVIEW";
in: "NI Days 2001",
herausgegeben von: National Instruments;
VNU Business Publications,
Cinisello Balsamo,
2001,
S. 44
- 45.
-
J. Wassermann, M. Schneeberger:
"A highly flexible online controllable FES-pattern generator for basic research";
in: "Proc. of 2003 Int. Functional Electrical Stimulation Society Conference",
IFESS International Functional Electric Stimulation Society,
2003,
S. 74
- 77.
-
M. Weitz, S. Schoder, M. Kaltenbacher:
"A Stochastic Approach to Compute Cavity Noise using SNGR";
in: "Waves 2019",
herausgegeben von: TU Wien;
Institut für Mechanik und Mechatronik, Technische Universität Wien,
Wien,
2019, (eingeladen),
S. 154
- 155.
Zusätzliche Informationen
-
M. Weitz, S. Schoder, M. Kaltenbacher:
"Numerical investigation of the resonance behavior of flow-excited Helmholtz resonators";
in: "Proceedings in Applied Mathematics & Mechanics",
Wiley-VCH,
2019.
Zusätzliche Informationen
-
M. Zellhofer, M. Krommer:
"Numerical Verification of Piezoelectric Sensor Networks for Structural and Health Monitoring of a Three Story Frame Structure";
in: "Proc. of the 6th ECCOMAS Thematic Conference on Smart Structures and Materials (SMART 2013), June 24-26th, 2013, Torino, Italy",
E. Carrera, F. Miglioretti, M. Petrolo (Hrg.);
Politecnic di Torino,
2013,
20 S.
-
M. Zellhofer, A. Pötsch, G. Möstl, M. Krommer:
"Wireless Sensor Networks for Monitoring and Control of Frame Structures";
in: "Proc. of the 2013 World Congress on Advances in Structural Engineering and Mechanics (ASEM 13), September 8-12th, 2013, Jeju, Korea",
C.-K. Choi (Hrg.);
KAIST,
2013,
S. 1004
- 1020.
-
S. Zörner, P. Sidlof, A. Hüppe, M. Kaltenbacher:
"Human voiced sound simulation by the acoustic perturbation equations and Lighthill´s analogy";
in: "10th PAN-EUROPEAN VOICE CONFERENCE",
herausgegeben von: PEVOC;
Medical Healthcom spol. s r.o. and the authors,
Prag,
2013, (eingeladen),
ISBN: 9788026048329,
Paper-Nr. 98,
138 S.
Zusätzliche Informationen
Vorträge und Posterpräsentationen (mit Tagungsband-Eintrag)
-
H. Amri, R. Feil, M. Hajek, M. Weigand:
"übersetzungsvariable Getriebe Für Drehflügler";
Vortrag: 63. Deutscher Luft- und Raumfahrt Kongress 2014,
Augsburg;
16.09.2014
- 18.09.2014; in: "63. Deutscher Luft- und Raumfahrt Kongress 2014",
(2014),
Paper-Nr. 0225,
14 S.
Zusätzliche Informationen
-
H. Amri, W. Garre, P. Tobias, P. Paschinger, M. Mileti, M. Hajek, M. Weigand:
"Helicopter Configurations And Drive Train Concepts For Optimal Variable Rotor-Speed Utilization";
Vortrag: Deutscher Luft- und Raumfahrtkongress 2016,
Braunschweig, Deutschland;
13.09.2016
- 15.09.2016; in: "Deutscher Luft- und Raumfahrtkongress 2016",
(2016),
Paper-Nr. DGLRK2016_0103,
13 S.
Zusätzliche Informationen
-
H. Amri, Kathi Hartenthaler, M. Weigand:
"Mass and Kinematic Analysis of Compound Split with Simulation of the Shifting Process for Variable Rotor Speed";
Vortrag: 74th Forum of then American Helicopter Society,
Phoenix;
21.05.2018
- 25.05.2018; in: "74th Forum of then American Helicopter Society",
H. Amri, Kathi Hartenthaler, M. Weigand (Hrg.);
(2018),
15 S.
Zusätzliche Informationen
-
H. Amri, R. Hofstädter, M. Kozek:
"Energy Efficient Design and Simulation of a Demand Controlled Heating and Ventilation Unit in a Metro Vehicle";
Vortrag: IEEE Forum on Integrated and Sustainable Transportation Systems (FISTS),
Vienna;
29.06.2011
- 01.07.2011; in: "Proceedings of the IEEE Forum on Integrated and Sustainable Transportation Systems",
(2011),
6 S.
Zusätzliche Informationen
-
H. Amri, P. Paschinger, M. Weigand et al.:
"Possible Technologies For A Variable Rotor Speed Rotorcraft Drive Train";
Vortrag: 42nd European Rotorcraft Forum 2016,
Lille, France;
03.09.2016
- 05.09.2016; in: "42nd European Rotorcraft Forum 2016",
(2016),
Paper-Nr. ERF2016_108,
15 S.
Zusätzliche Informationen
-
T. Angeli, M. Gföhler, P. Lugner, L. Rinder:
""Radfahren mit Paraplegikern"";
Vortrag: Adapted Physical Activity,
Wien;
2003; in: "Kongressbericht des 13. Internationalen Symposiums für "Adapted Physical Activity" 2001",
(2003),
S. 457
- 461.
-
T. Apatay, E. Arslan, W. Mack:
"Thermally assembled shrink fit with annular inclusion and FGM-hub";
Vortrag: 89th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM),
München, Germany;
19.03.2018
- 23.03.2018; in: "89th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM)",
Proc. Appl. Math. Mech.,
18
(2018).
-
T. Apatay, E. Arslan, W. Mack:
"Thermally loaded elastic-plastic shink fit with FGM-hub";
Vortrag: GAMM 2017 - 88th Annual Meeting of the International Association of Applied Mathematics and Mechanics,
Weimar/DE;
06.03.2017
- 10.03.2017; in: "Proceedings of the annual GAMM meeting",
Proceedings in Applied Mathematics and Mechanics (PAMM) / Wiley-VCH,
(2017),
ISSN: 1617-7061;
S. 285
- 286.
-
E. Arslan, T. Apatay, W. Mack:
"Effects of a temperature cycle on a rotating shrink fit with FGM-hub";
Vortrag: GAMM 2019 - 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics,
Universität Wien, Austria;
18.02.2019
- 22.02.2019; in: "90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM)",
Wiley,
(2019).
-
E. Arslan, W. Mack, M. Zigo, G. Kepplinger:
"Determination of material parameters from imperfect cyclic plasticity test data";
Vortrag: GAMM 2017 - 88th Annual Meeting of the International Association of Applied Mathematics and Mechanics,
Weimar/DE;
06.03.2017
- 10.03.2017; in: "Proceedings of the annual GAMM meeting",
Proceedings in Applied Mathematics and Mechanics (PAMM) / Wiley-VCH,
(2017),
ISSN: 1617-7061;
S. 385
- 386.
-
E. Arslan, M. Zigo, G. Kepplinger:
"A Novel Approach for Determination of Hardening Parameters of an Aluminum Alloy under Cyclic Loading with High Amplitudes";
Vortrag: The 4th International Conference on Materials and Intelligent Manufacturing (ICMIM),
Osaka;
26.08.2020
- 28.08.2020; in: "The 4th International Conference on Materials and Intelligent Manufacturing (ICMIM)",
2020 IOP Conf. Ser.: Mater. Sci. Eng.,
947
(2020),
Paper-Nr. 012009,
5 S.
-
E. Arslan, M. Zigo, G. Kepplinger:
"Düşük döngüsel yük altındaki alüminyum alaşımın pekleşme parametreleri üzerine analiz";
Vortrag: 20. Ulusal Mekanik Kongresi,
Bursa;
05.09.2017
- 09.09.2017; in: "Book of 20. Ulusal Mekanik Kongresi",
(2017),
S. 638
- 647.
-
G. Aschauer, A. Schirrer, S. Jakubek:
"Realtime-capable finite element model of railway catenary dynamics in moving coordinates";
Vortrag: IEEE Multi-Conference on Systems and Control 2016,
Buenos Aires;
19.09.2016
- 22.09.2016; in: "2016 IEEE Conference on Control Applications (CCA)",
(2016),
S. 1078
- 1083.
Zusätzliche Informationen
-
G. Aschauer, A. Schirrer, M. Kozek:
"Co-Simulation of Matlab and FlightGear for Identifcation and Control of Aircraft";
Vortrag: MATHMOD 2015 - 8th Vienna International Conference on Mathematical Modelling,
Wien;
18.02.2015
- 20.02.2015; in: "8th Vienna International Conference on Mathematical Modelling MATHMOD 2015",
IFAC,
48-1
(2015),
ISSN: 2405-8963;
S. 67
- 72.
Zusätzliche Informationen
-
W. Auzinger, I. Reichl, H. Schmiedmayer, E. Weinmüller:
"Knee joint kinematics: comparison of two optimization models with respect to data noise";
Vortrag: GAMM Jahrestagung 2011,
Graz (eingeladen);
18.04.2011
- 21.04.2011; in: "Proceedings of the GAMM 82nd Annual Scientific Conference, Graz, Austria, April 18-21, 2011",
11
(2011),
ISSN: 1617-7061;
111 S.
Zusätzliche Informationen
-
S. Badshah, M. Neumann, J. Wassermann:
"Modal analysis of aluminum structure filled with aluminum foam using scanning laser vibrometer";
Vortrag: ICSV15, 15th International Congress on Sound and Vibration,
Daejon, Korea;
06.07.2008
- 10.07.2008; in: "Proceedings of 15th International Congress on Sound and Vibration (ICSV15)",
(2008),
ISBN: 978-89-961284-1-0;
Paper-Nr. SS0585,
7 S.
Zusätzliche Informationen
-
C. Benatzky, M. Kozek:
"An actuator fault detection concept for active vibration control of a heavy metro vehicle";
Vortrag: ICSV14, 14th International Congress on Sound and Vibration,
Cairns, Australia;
09.07.2007
- 12.07.2007; in: "Proceedings of the 14th International Congress on Sound and Vibration",
(2007),
ISBN: 9780733425165;
Paper-Nr. 34,
8 S.
Zusätzliche Informationen
-
C. Benatzky, M. Kozek:
"An identification procedure for a scaled metro vehicle - flexible structure experiment";
Vortrag: European Control Conference 2007,
Kos, Griechenland;
02.07.2007
- 05.07.2007; in: "Proceedings of the European Control Conference 2007",
(2007),
ISBN: 978-960-89028-5-5;
S. 4639
- 4644.
Zusätzliche Informationen
-
C. Benatzky, M. Kozek:
"Effects of local actuator action on the control of large flexible structures";
Vortrag: 16th IFAC World Congress,
Prague;
03.07.2005
- 08.07.2005; in: "Preprints of the 16th IFAC",
(2005).
Zusätzliche Informationen
-
C. Benatzky, M. Kozek:
"Influence of actuator size and location on robust stability of actively controlled flexible beams";
Vortrag: 17th IFAC World Congress,
Seoul, Korea;
06.07.2008
- 11.07.2008; in: "Proceedings of the 17th IFAC World Congress",
(2008),
6 S.
Zusätzliche Informationen
-
C. Benatzky, M. Kozek, C. Bilik:
"Experimental Control of a Flexible Beam Using a Stack-Bending Actuator Principle";
Vortrag: Proceedings of the 20th Scientific Conference,
Hanoi, Vietnam;
12.10.2006
- 14.10.2006; in: "Proceedings of the 20th Scientific Conference",
(2006),
S. 128
- 133.
Zusätzliche Informationen
-
C. Benatzky, M. Kozek, H. Jörgl:
"Comparison of controller design methods for a scaled metro vehicle - flexible structure experiment";
Vortrag: 2007 American Control Conference,
New York City, USA,;
11.07.2007
- 13.07.2007; in: "Proceedings of the 2007 American Control Conference",
(2007),
ISBN: 1-4244-0989-6;
Paper-Nr. WeA06.4,
6 S.
Zusätzliche Informationen
-
D. Benz, P. E. Pfeffer, J. Edelmann, M. Plöchl:
"Analysis of the Amplitude and Frequency Dependency of the Top Mount Damper Assembly with Focus on Small Excitations";
Vortrag: Aachener Kolloquium Fahrzeug- und Motorentechnik,
Aachen;
07.10.2019
- 09.10.2019; in: "28. Aachener Kolloquium",
(2019).
-
C. Bilik, C. Benatzky, M. Kozek:
"A PC-based multi purpose test bed environment for structural testing and control";
Vortrag: International Symposium Remote Engineering and Virtual Instrumentation 2006 (REV 2006),
Maribor, Slovenia;
29.06.2006
- 30.06.2006; in: "CD-Proceedings International Symposium Remote Engineering and Virtual Instrumentation",
(2006),
ISBN: 3-89958-194-6;
7 S.
Zusätzliche Informationen
-
L. Bitschnau, S. Jakubek, M. Kozek:
"Constrained Model Predictive Control Of A Continuous Annealing Furnace";
Vortrag: 2010 ASME Dynamic Systems and Control Conference,
Cambridge, USA;
13.09.2010
- 15.09.2010; in: "Proceedings ASME Dynamic Systems and Control Conference",
(2010),
ISBN: 978-0-7918-3884-6;
8 S.
Zusätzliche Informationen
-
L. Bitschnau, M. Kozek:
"Modeling and Control of an Industrial Continuous Furnace";
Vortrag: 2009 International Conference on Computational Intelligence, Modelling and Simulation,
Brno, Czech Republik;
07.09.2009
- 09.09.2009; in: "2009 International Conference on Computational Intelligence, Modelling and Simulation",
(2009),
ISBN: 9780769537955;
6 S.
Zusätzliche Informationen
-
L. Bitschnau, M. Kozek, S. Jakubek, F. Leeber:
"Implementation of Model Predictive Control in an Industrial Continuous Annealing Furnace";
Vortrag: Control and Applications 2011,
Vancouver;
01.06.2011
- 03.06.2011; in: "Iaested Ca 2011",
Canada, Calgary
(2011),
Paper-Nr. 729-045,
8 S.
Zusätzliche Informationen
-
L. Böhler, M. Kozek et al.:
"Implementation of a fuzzy model predictive controller for biomass combustion";
Vortrag: e-nova 2017 Zukunft der Gebäude: digital - dezentral - ökologisch,
Pinkafeld;
24.11.2016
- 25.11.2016; in: "enova 2017",
L. Böhler (Hrg.);
Leykam,
Nachhaltige Technologien
(2017),
ISBN: 978-3-7011-0372-0;
S. 53
- 60.
Zusätzliche Informationen
-
L. Böhler, M. Kozek et al.:
"Key Influence Factors in Modelling of Biomass Combustion in Small and Medium Scale Furnaces";
Vortrag: e-nova 2016 Internationaler Kongress: Nachhaltige Technologien Gebäude - Energie - Umwelt,
Pinkafeld;
24.11.2016
- 25.11.2016; in: "enova 2016",
L. Böhler (Hrg.);
Leykam,
Nachhaltige Technologien
(2016),
ISBN: 978-3-7011-0372-0.
Zusätzliche Informationen
-
M. Borowiec, G. Litak, H. Troger:
"Vibrations of a Pendulum with Oscillating Support and Extra Torque";
Vortrag: GAMM 2006,
Berlin;
27.03.2006
- 31.03.2006; in: "GAMM Annual Meeting - Berlin 2006",
WILEY-VCH Verlag GmbH & Co. KGaA,
6
(2006),
S. 291
- 292.
Zusätzliche Informationen
-
G. Brantner, G. Fuchs, A. Schirrer, S. Jakubek:
"A Detalied Nonlinear Dynamic Model of a 3-DOF Laboratory Helicopter for Control Design";
Vortrag: MATHMOD 2012 - 7th Vienna International Conference on Mathematical Modelling,
Wien/AT;
15.02.2012
- 17.02.2012; in: "Preprints Mathmod 2012 Vienna - Full Paper Volume",
I. Troch, F. Breitenecker (Hrg.);
Argesim / Asim,
38
(2012),
S. 51
- 52.
Zusätzliche Informationen
-
F. Bruck, P. Lugner, H. Schretter:
"A Dynamic Model for the Performance of Carving Skis";
Vortrag: Skiing Trauma and Safety,
Queensland, New Zealand;
05.08.2001
- 10.08.2001; in: "Skiing Trauma and Safety",
American Society for Testing and Materials International,
14
(2003),
ISBN: 0-8031-3462-2;
S. 10
- 23.
-
P. Brugger, H. Schmiedmayer:
"Modelling Gait to Test the Dynamic Behaviour of Knee Joints for Above Knee Amputees";
Vortrag: European Workshop on Movement Science,
Wien (eingeladen);
02.06.2005
- 04.06.2005; in: "Mechanics, Physiology, Psychology",
Verlag Sport und Buch Strauß,
(2005),
ISBN: 3-89001-256-6;
S. 55
- 56.
-
P. Brugger, H. Schmiedmayer:
"Simulating Prosthetic Gait - Lessons to Learn";
Vortrag: GAMM 2003,
Padova, Italia;
24.03.2003
- 28.03.2003; in: "Proc. Appl. Math. Mech.",
(2003),
ISSN: 1617-7061;
S. 64
- 67.
-
V. Buchin, A. Burov, H. Troger:
"A Dumb-bell Satellite with a Cabin. Existence and Stability of Relative Equilibria";
Vortrag: 6th EUROMECH Conference ENOC 2008,
Russia;
30.06.2008
- 04.07.2008; in: "Enoc 2008",
A. Fradkov (Hrg.);
(2008),
Paper-Nr. 246,
6 S.
Zusätzliche Informationen
-
N. Chivarov, N. Shivarov, P. Kopacek:
"Educational Articulated Robot - ROBKO PHOENIX";
Vortrag: Eighteenth International Conference "Robotics and Mechatronics" '08,
Varna, Bulgaria;
17.09.2008
- 21.09.2008; in: "Proceedings of the Eighteenth International Conference "Robotics and Mechatronics" '08",
(2008),
S. 207
- 211.
-
F. Degenhart, M. Plöchl, J. Edelmann:
"A Method to Evaluate Measured Longitudinal Tire Characteristics in Tire Development";
Vortrag: 27. Aachener Kolloquium Fahrzeug- und Motorentechnik 2018,
Eurogress Aachen | Germany;
08.10.2018
- 10.10.2018; in: "Tagungsband zum 27. Aachener Kolloquium",
(2018).
-
Maxime Deregnaucourt, M. Kozek:
"Robust Quality Analysis Using Coarsely Discretized Measurements";
Vortrag: 4th International Conference on MANUFACTURING ENGINEERING, QUALITY and PRODUCTION SYSTEMS (MEQAPS '11),
Barcelona, Spain;
15.07.2011
- 17.07.2011; in: "Proceedings of the 4th International Conference on MANUFACTURING ENGINEERING, QUALITY and PRODUCTION SYSTEMS (MEQAPS '11)",
(2011),
ISBN: 978-1-61804-033-6;
Paper-Nr. MEQAPS-38,
6 S.
Zusätzliche Informationen
-
Maxime Deregnaucourt, M. Stadlbauer, C. Hametner, S. Jakubek, J. Wurzenberger:
"Nonlinear conjugate gradient algorithm for model based design of experiments";
Vortrag: 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012),
University of Vienna;
10.09.2012
- 14.09.2012; in: "Proceedings of 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)",
(2012).
Zusätzliche Informationen
-
A. Dermaku, K. Dragusha, E. Hajrizi, P. Kopacek, A. Muratil:
"Robotsoccer - A Tool for Mechatronics Education Case Study - UBT";
Poster: Ciras 2008,
Linz;
19.06.2008
- 21.06.2008; in: "Preprint-Proceedings Ciras 2008 5th International Conference on Computational Intelligence, Robotics and Autonomous Systems",
(2008),
4 S.
-
N. Didcock, S. Jakubek, C. Hametner, H. Altenstrasser, A. Dragoti, N. Keuth:
"Lookup Table Optimisation For Engineering Applications";
Vortrag: 8th Conference Design of Experiments (DoE) in Powertrain Development,
Berlin;
11.06.2015
- 12.06.2015; in: "Design of Experiments (DoE) in Engine Developement",
K. Röpke, C. Gühmann (Hrg.);
Expert Verlag,
8/Renningen, Deutschland
(2015),
ISBN: 978-3-8169-3316-8;
11 S.
Zusätzliche Informationen
-
F. Dohnal:
"Optimal multi-location harmonic stiffness excitation";
Vortrag: Dynamics of Machines 2007,
Prague;
06.02.2007
- 07.02.2007; in: "Proceedings Dynamics of Machines 2007",
Institute of Thermomechanics, ASCR,
Prague
(2007),
ISBN: 978-80-87012-03-1;
S. 35
- 42.
Zusätzliche Informationen
-
F. Dohnal:
"Suppression of self-excited vibrations by non-smooth parametric excitation";
Vortrag: Dynamics of Machines 2004,
Prague;
10.02.2004
- 11.02.2004; in: "Proceedings Dynamics of Machines 2004",
(2004),
ISBN: 80-85918-85-4;
S. 27
- 34.
-
F. Dohnal:
"Suppression of self-excited vibrations by synchronous stiffness and damping variation";
Vortrag: Dynamics of Machines 2005,
Prag;
08.02.2005
- 09.02.2005; in: "Proc. Dynamics of Machines 2005",
L. Pesek (Hrg.);
(2005),
ISBN: 80-85918-79-x;
S. 23
- 30.
-
F. Dohnal, W. Paradeiser, H. Ecker:
"Experimental study on cancelling self-excited vibrations by parametric excitation";
Vortrag: 2006 International Mechanical Engineering Congress & Exposition (IMECE2006),
Chicago, USA;
05.11.2006
- 10.11.2006; in: "Proceedings of IMECE 2006",
ASME,
(2006),
ISBN: 0-7918-3790-4;
Paper-Nr. IMECE2006-14552,
10 S.
Zusätzliche Informationen
-
P. Dolovai, H. Jörgl, J. Hirzinger:
"H∞ Controller Design for Speed Control of a Natural Gas Engine";
Vortrag: Chinese Control Conference,
Kunming, Yunnan, China;
16.07.2008
- 18.07.2008; in: "Proceedings of the 27th Chinese Control Conference",
(2008),
ISBN: 9787900719706;
6 S.
Zusätzliche Informationen
-
C. Dullinger, A. Schirrer, M. Kozek:
"Advanced Control Education: Optimal & Robust MIMO Control of a Flexible Beam Setup";
Poster: 19th IFAC World Congress,
Cape Town, South Africa;
24.08.2014
- 29.08.2014; in: "Proc. of 19th IFAC World Congress",
(2014),
ISBN: 978-3-902823-62-5;
S. 9019
- 9025.
Zusätzliche Informationen
-
C. Dullinger, A. Schirrer, M. Kozek:
"Data-based and analytic modelling for model-based control of a flexible beam";
Vortrag: MATHMOD 2015 - 8th Vienna International Conference on Mathematical Modelling,
Wien;
18.02.2015
- 20.02.2015; in: "Mathmod 2015",
IFAC,
(2015),
S. 1
- 2.
Zusätzliche Informationen
-
H. Ecker:
"Alternative Darstellungen von FRFs und Anwendung in der Rotordynamik";
Vortrag: 2. VDI-Fachtagung Schwingungen 2019,
Würzburg;
05.11.2019
- 06.11.2019; in: "2. VDI-Fachtagung Schwingungen 2019",
VDI,
(2019),
10 S.
Zusätzliche Informationen
-
H. Ecker:
"Beneficial effects of parametric excitation in rotor systems";
Vortrag: IUTAM Symposium on Emerging Trends in Rotor Dynamics,
New Delhi, India (eingeladen);
23.03.2009
- 26.03.2009; in: "IUTAM Symposium on Emerging Trends in Rotor Dynamics",
Indian Institute of Technology Delhi, India,
(2009),
10 S.
Zusätzliche Informationen
-
H. Ecker:
"Exploring the Use of Parametric Excitation";
Hauptvortrag: 10th International Conference on Recent Advances in Structural Dynamics (RASD 2010),
Southampton (eingeladen);
12.07.2010
- 14.07.2010; in: "Proceedings RASD 2010",
M. J. Brennan (Hrg.);
(2010),
S. 1
- 18.
Zusätzliche Informationen
-
H. Ecker:
"Motorcycle accidents - Case studies and what to learn from them";
Vortrag: 4th US Meeting of the International Motorcycle Safety Conference (IMSC 2006),
Long Beach, CA;
28.03.2006
- 30.03.2006; in: "International Motorcycle Safety Conference - The Human Element",
MSF,
Irvine, CA
(2006),
7 S.
-
H. Ecker:
"Multi-location parametric stiffness excitation of a self-excited two mass system";
Vortrag: Dynamics of Machines 2004,
Prague;
10.02.2004
- 11.02.2004; in: "Proceeding Dynamics of Machines 2004",
(2004),
ISBN: 80-85918-85-4;
S. 43
- 50.
-
H. Ecker:
"Optimal phase relationship for a system with multi-location parametric excitation";
Vortrag: Dynamics of Machines 2005,
Prag;
08.02.2005
- 09.02.2005; in: "Proc. Dynamics of Machines 2005",
L. Pesek (Hrg.);
(2005),
ISBN: 80-85918-79-x;
S. 47
- 54.
Zusätzliche Informationen
-
H. Ecker:
"Parametric Excitation In Engineering Systems";
Hauptvortrag: COBEM2009,
Gramado-RS, Brazil (eingeladen);
15.11.2009
- 20.11.2009; in: "Proceedings COBEM2009",
S. Möller (Hrg.);
ABCM,
(2009),
Paper-Nr. COB09-2246,
10 S.
Zusätzliche Informationen
-
H. Ecker:
"Parametric excitation in rotating machinery";
Hauptvortrag: IMechE's 12th Int. Conf. on Vibrations in Rotating Machinery - VIRM 11,
Manchester (eingeladen);
13.09.2016
- 15.09.2016; in: "VIRM 11 - Vibrations in Rotating Machinery",
Institution of Mechanical Engineers,
Westminster, London, UK
(2016),
ISBN: 978-0-9572374-8-3;
S. 3
- 12.
-
H. Ecker:
"Test facility design for experimental studies of parametrically excited vibrations";
Vortrag: Dynamics of Machines 2008,
Prag;
05.02.2008
- 06.02.2008; in: "Proceedings Dynamics of Machines 2008",
L. Pesek (Hrg.);
Institute of Thermomechanics, ASCR,
Prague
(2008),
ISBN: 978-80-87012-10-9;
S. 31
- 38.
Zusätzliche Informationen
-
H. Ecker, F. Dohnal:
"Dynamic Stabilization of a Self-Excited Coupled Pendulum System";
Vortrag: 7th International Conference on Motion and Vibration Control (MOVIC 2004),
St. Louis, Missouri;
08.08.2004
- 11.08.2004; in: "Proc. of 7th Int. Conf. on Motion and Vibration Control",
B. Spencer, L. Bergman, S.J. Dyke, J.M. Caicedo (Hrg.);
Washington University in St.Louis,
(2004),
10 S.
-
H. Ecker, F. Dohnal:
"Stabilization of an Unstable Two Pendulum System by Pivot Excitation";
Vortrag: Tenth Conference on Nonlinear Vibrations, Stabiliy, and Dynamics of Structures,
Blacksburg,VA;
25.07.2004
- 29.07.2004; in: "Proc. of Tenth Conference on Nonlinear Vibrations, Stabiliy, and Dynamics of Structures",
A.H. Nayfeh (Hrg.);
(2004),
2 S.
-
H. Ecker, F. Dohnal, H. Springer:
"Enhanced Damping of a Beam Structure by Parametric Excitation";
Vortrag: Fifth EUROMECH Nonlinear Dynamics Conference,
Eindhoven;
07.08.2005
- 12.08.2005; in: "Proceedings ENOC-2005",
D. H. van Campen, M.D. Lazurko, W.P.J.M. van den Oever (Hrg.);
(2005),
ISBN: 90-386-2667-3;
Paper-Nr. 22-271,
10 S.
Zusätzliche Informationen
-
H. Ecker, H. Lindl:
"Blind-spots and the investigation of truck driver´s visibility conditions";
Vortrag: EVU 23rd Annual Congress Copenhagen 2014,
Kopenhagen;
16.10.2014
- 18.10.2014; in: "Proceedings 23rd Annual Congress Copenhagen 2014",
(2014),
ISBN: 9788799310012;
Paper-Nr. EVU 2014 - 03-EN,
12 S.
Zusätzliche Informationen
-
H. Ecker, S Litschauer:
"Experimental Study on Lane Change Maneuvers with a Motorcycle";
Vortrag: Virtual Conference IDETC-CIE 2020,
USA;
16.08.2020
- 19.08.2020; in: "Proceedings of the ASME 2020 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference IDETC/CIE2020",
ASME,
(2020),
Paper-Nr. DETC2020-22713,
10 S.
Zusätzliche Informationen
-
H. Ecker, W. Paradeiser, E. Schmidt:
"Experimental investigation of a parametrically excited nonlinear system";
Vortrag: 7th European Nonlinear Dynamics Conference ENOC 2011,
Rom;
24.07.2011
- 29.07.2011; in: "Proceedings of the 7th European Nonlinear Dynamics Conference (ENOC 2011)",
D. Bernardini, G. Rega, F Romeo (Hrg.);
(2011),
ISBN: 978-88-906234-2-4;
2 S.
Zusätzliche Informationen
-
H. Ecker, B. Petermeier:
"Vibration suppression by parametric excitation in the case of non-conservative systems";
Vortrag: 13th Conference on NONLINEAR VIBRATIONS, DYNAMICS, AND MULTIBODY SYSTEMS,
Blacksburg/VA, USA;
23.05.2010
- 27.05.2010; in: "Proceedings of 13th Conference on NONLINEAR VIBRATIONS, DYNAMICS, AND MULTIBODY SYSTEMS",
A.H. Nayfeh (Hrg.);
Virginia Polytechnic Institute and State University,
Blacksburg, Virginia
(2010),
2 S.
-
H. Ecker, T. Pumhössel:
"Energy transfer in time-periodic systems near parametric anti-resonances";
Vortrag: EUROMECH 532 - 1st International Colloquium on Time-periodic Systems,
Frankfurt;
27.08.2012
- 30.08.2012; in: "Time Periodic Systems - Current trends in theory and application",
(2012),
ISBN: -978-3-9814163-9-8;
S. 101
- 104.
-
H. Ecker, T. Pumhössel:
"Parametric excitation of a rotor system due to a periodic axial force";
Vortrag: 7th European Nonlinear Dynamics Conference ENOC 2011,
Rom;
24.07.2011
- 29.07.2011; in: "Proceedings of the 7th European Nonlinear Dynamics Conference (ENOC 2011)",
D. Bernardini, G. Rega, F Romeo (Hrg.);
(2011),
ISBN: 978-88-906234-2-4;
6 S.
Zusätzliche Informationen
-
H. Ecker, I Rottensteiner:
"Experimental Study on Parametric Anti-resonances of an Axially Forced Beam";
Vortrag: IMAC-XXVIII,
Jacksonville/FL;
01.02.2010
- 04.02.2010; in: "Conference Proceedings IMAC-XXVIII",
Society for Experimental Mechanics,
Bethel/CT
(2010),
ISBN: 978-1-935116-04-2.
Zusätzliche Informationen
-
H. Ecker, P Saleh:
"MoProVe - A Probe Vehicle for Traffic Accident Research";
Vortrag: EVU - 25th Annual Congress,
Bratislava,Slovakia;
20.10.2016
- 22.10.2016; in: "EVU Proceedings 25th Annual Congress",
EDIS - Editing Centre of University of Zilina,
(2016),
ISBN: 978-80-554-1260-3;
S. 29
- 41.
-
H. Ecker, P Saleh:
"Test Vehicles for Motorcycle Accident Reconstruction and Analysis";
Poster: WREX 2016 - World Reconstruction Exposition,
Orlando, Florida, USA;
02.05.2016
- 06.05.2016; in: "Proceedings of WREX 2016",
(2016),
S. 1
- 7.
-
H. Ecker, H. Springer:
"Stability Limits of a Self-excited Torsional Vibration System";
Vortrag: 4th International Symposium on Stability Control of Rotating Machinery (ISCORMA-4),
Calgary, Canada;
27.08.2007
- 31.08.2007; in: "Proceedings of the 4th International Symposium on Stability Control of Rotating Machinery",
Bently Pressurized Bearing Comp.,
(2007),
10 S.
Zusätzliche Informationen
-
H. Ecker, H. Springer, H. Haselbacher:
"Dynamic Response of a Rotor Bearing System due to Bearing Failure";
Vortrag: IFToMM 4th Int. Conf. on Rotor Dynamics,
Chicago, USA;
07.09.1994
- 09.09.1994; in: "Proceedings of the 4th Inf. Conf. on Rotor Dynamics",
(1994).
-
H. Ecker, A. Tondl:
"Increasing the stability threshold of a rotor by open-loop control of the bearing mount stiffness";
Vortrag: The 3rd International Symposium on Stability Control of Rotating Machinery (ISCORMA-3),
Cleveland, Ohio;
19.09.2005
- 23.09.2005; in: "Proceedings Third Internat. Symp. on Stability Control of Rotating Machinery",
J.T. Sawicki, A. Muszynska (Hrg.);
(2005),
S. 351
- 361.
-
H. Ecker, A. Tondl:
"Suppression of self-excited vibrations in valve systems: active means";
Vortrag: Dynamics of Machines 2007,
Prague;
06.02.2007
- 07.02.2007; in: "Proceedings Dynamics of Machines 2007",
L. Pesek (Hrg.);
Institute of Thermomechanics ASCR,
Prague
(2007),
ISBN: 978-80-87012-03-1;
S. 55
- 62.
Zusätzliche Informationen
-
H. Ecker, A. Tondl:
"Suppression of self-induced vibrations by a strongly non-linear parametric excitation";
Vortrag: 9th International Conference on Motion and Vibration Control,
Munich;
15.09.2008
- 18.09.2008; in: "Proceedings-CD MOVIC 2008",
(2008),
Paper-Nr. 1170,
12 S.
Zusätzliche Informationen
-
J. Edelmann, M. Haudum, M. Plöchl:
"Bicycle rider control modelling for path tracking";
Vortrag: 5th MATHMOD VIENNA,
Wien;
18.02.2015
- 20.02.2015; in: "Mathematical Modelling",
IFAC,
8/1
(2015),
S. 55
- 60.
-
J. Edelmann, M. Plöchl:
"A combined driver model for lateral and longitudinal vehicle dynamics";
Vortrag: Simpack User-Meeting,
Baden-Baden;
21.03.2006
- 22.03.2006; in: "SIMPACK User Meeting 2006",
(2006).
-
J. Edelmann, M. Plöchl:
"A driver model for vehicle dynamics simulation";
Vortrag: 11th European Automotive Congress,
Budapest;
30.05.2007
- 01.06.2007; in: "Automobile for the future",
(2007),
14 S.
-
J. Edelmann, M. Plöchl:
"Controllability of the powerslide motion of vehicles with different drive concepts";
Vortrag: 10th International Conference on Structural Dynamics, EURODYN 2017,
Rom;
10.09.2017
- 13.09.2017; in: "X International Conference on Structural Dynamics, EURODYN 2017",
Procedia Engineering / Elsevier,
199
(2017),
ISSN: 1877-7058;
S. 3266
- 3271.
-
J. Edelmann, M. Plöchl, P. Lugner:
"A steer-by-wire control strategy for a tilting three-wheeled vehicle";
Vortrag: Symposium of the International Association of Vehicle System Dynamics,
Stockholm;
17.08.2009
- 21.08.2009; in: "Proc. of the 21st International Symposium on Dynamics of Vehicles on Roads and Tracks",
(2009),
11 S.
-
J. Edelmann, M. Plöchl, P. Lugner, W. Mack, A. Falkner:
"Investigations on the powerslide of automobiles";
Vortrag: 9th International Symposium on Advanced Vehicle Control,
Kobe;
06.10.2008
- 09.10.2008; in: "Proceedings of AVEC'08",
(2008).
-
J. Edelmann, M. Plöchl, P. E. Pfeffer:
"Analysis of steady-state vehicle handling and driver behaviour at extreme driving conditions";
Hauptvortrag: 22nd International Symposium on Dynamics of Vehicles on Roads and Tracks,
Manchester;
14.08.2011
- 19.08.2011; in: "Proceedings of IAVSD 2011",
(2011).
-
J. Edelmann, M. Plöchl, W. Reinalter, W. Tieber, P. Lugner:
"A driver model for path tracking tasks at higher lateral acceleration";
Vortrag: 8th Int. Symposium on Advanced Vehicle Control,
Taipei;
20.08.2006
- 24.08.2006; in: "Preceedings of AVEC'06",
(2006),
ISBN: 9860059470;
S. 829
- 834.
-
S. Engleder, H. Springer:
"Dynamic Analysis and Nonlinear Control of an Injection Moulding Machine";
Vortrag: ECCOMAS Multibody Dynamics 2005,
Madrid;
21.06.2005
- 24.06.2005; in: "Multibody Dynamics 2005",
J. M. Goicolea, J Cuadrado, J. C. Garcia Orden (Hrg.);
(2005),
ISBN: 84-7493-353-6;
16 S.
Zusätzliche Informationen
-
H. Erbe, R. Genser, M. Han, M. Hersh, P. Kopacek, L. Stapleton:
"Control Strategies for a Sustainable Future";
Vortrag: IFAC Conference on Supplemental Ways for Improving International Stability through Automation ISA'06,
Prishtina, Kosovo;
15.06.2006
- 17.06.2006; in: "Improving Stability in Developing Nations Through Automation 2006 - A Proceedings Volume from the IFAC Conference on Supplemental Ways for Improving International Stability through Automation ISA'06",
(2006),
ISBN: 9780080454061;
S. 113
- 115.
-
H. Erbe, P. Kopacek:
"Energy Providing and Consumption can cause Instability";
Vortrag: IFAC Conference on Supplemental Ways for Improving International Stability through Automation ISA'06,
Prishtina, Kosovo;
15.06.2006
- 17.06.2006; in: "Improving Stability in Developing Nations Through Automation 2006 - A Proceedings Volume from the IFAC Conference on Supplemental Ways for Improving International Stability through Automation ISA'06",
(2006),
ISBN: 9780080454061;
S. 21
- 29.
-
D. Erdogan, S. Jakubek, C. Hametner:
"Model Predictive Control and Disturbance Compensation for Engine Test Beds";
Vortrag: IEEE Conference on Industrial Electronics and Applications (ICIEA),
Norway;
09.11.2020
- 13.11.2020; in: "IEEE Conference on Industrial Electronics and Applications (ICIEA)",
IEEE Conference on Industrial Electronics and Applications (ICIEA),
(2020),
ISBN: 978-1-7281-5168-7;
S. 7
- 12.
Zusätzliche Informationen
-
N. Euler-Rolle:
"Dynamic Feedforward Control using Local Model Networks";
Poster: Vienna Young Scientists Symposium (VSS) 2015,
Wien;
25.06.2015
- 26.06.2015; in: "Proceedings of the Vienna Young Scientists Symposium (VSS) 2015",
Book-of-Abstracts.com,
(2015),
ISBN: 978-3-9504017-0-7;
S. 62
- 63.
-
N. Euler-Rolle, C. Bammer, M. Reinwald, S. Jakubek:
"Model based dynamic feedforward control of longitudinal tunnel ventilation";
Vortrag: Tunnel Safety and Ventilation - New Developments in Tunnel Safety,
Graz;
25.04.2016
- 26.04.2016; in: "8th International Conference on Tunnel Safety and Ventilation",
(2016),
ISBN: 9783851254648;
S. 212
- 219.
-
N. Euler-Rolle, C. Hametner, S. Jakubek:
"Automated generation of a dynamic feedforward control law using local model networks with disturbance inputs";
Vortrag: 86th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM),
Lecce, Italy;
23.03.2015
- 27.03.2015; in: "Proceedings in Applied Mathematics and Mechanics (PAMM)",
Wiley, Weinheim,
15 (1)
(2015),
ISSN: 1617-7061;
S. 629
- 630.
-
N. Euler-Rolle, C. Hametner, S. Jakubek:
"Automatic Generation of Feedforward Controllers using Dynamic Local Model Networks";
Vortrag: 19th IFAC World Congress,
Cape Town, South Africa;
24.08.2014
- 29.08.2014; in: "Proc. of 19th IFAC World Congress",
(2014),
S. 3128
- 3133.
Zusätzliche Informationen
-
N. Euler-Rolle, S. Jakubek:
"Longitudinal tunnel ventilation control: Dynamic feedforward control and non-linear disturbance observation";
Vortrag: 20. Steirisches Seminar über Regelungstechnik und Prozessautomatisierung,
Schloss Retzhof, Leitring/Wagna, Austria (eingeladen);
11.09.2017
- 13.09.2017; in: "20. Steirisches Seminar über Regelungstechnik und Prozessautomatisierung",
(2017),
S. 40
- 41.
-
S. Falk, S. Kniesburges, H. Sadeghi, S. Schoder, M. Kaltenbacher, M. Döllinger:
"simVoice - Numerical computation of the human voice source";
Vortrag: AQL 2019 - The 13th International Conference on Advances in Quantitative Laryngology, Voice and Speech Research,
Montreal (eingeladen);
02.06.2019
- 04.06.2019; in: "The 13th International Conference on Advances in Quantitative Laryngology, Voice and Speech Research",
(2019).
-
M. Fallmann, A. Poks, M. Kozek:
"Model Predictive Control for Mobile Refrigeration Systems: Challenges and Approaches";
Vortrag: e.nova 2021/22,
Pinkafeld;
01.06.2022
- 02.06.2022; in: "Science.Research.Pannonia",
H. Gremmel-Simon (Hrg.);
Holzhausen GmbH,
26
(2022),
ISBN: 978-3-903207-64-6;
S. 335
- 341.
Zusätzliche Informationen
-
W. Falmbigl, S. Jakubek, O. König, G. Prochart:
"Predictive Pulse Pattern Control for a Synchronous Multiphase Buck Converter";
Vortrag: 4th Symposium on Predictive Control of Electrical Drives and Power Electronics PRECEDE 2017,
Pilsen, Czech Republic;
04.09.2017
- 06.09.2017; in: "Proceedings 2017 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics (PRECEDE)",
(2017),
S. 60
- 65.
Zusätzliche Informationen
-
D. Fellner, H. Brunner, T. Strasser, W. Kastner:
"Towards Data-Driven Malfunctioning Detection in Public and Industrial Power Grids";
Vortrag: 2020 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA),
Wien;
08.09.2020
- 11.09.2020; in: "Proceedings of the 2020 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)",
IEEE,
(2020),
ISBN: 978-1-7281-8956-7;
4 S.
Zusätzliche Informationen
-
D. Fellner, T. Strasser, W. Kastner:
"Detection of Misconfigurations in Power Distribution Grids using Deep Learning";
Vortrag: 2021 International Conference on Smart Energy Systems and Technologies (SEST),
Vaasa, Finland (online);
06.09.2021
- 08.09.2021; in: "Proceedings of the 2021 International Conference on Smart Energy Systems and Technologies (SEST)",
IEEE,
(2021),
ISBN: 978-1-7281-7660-4;
S. 1
- 6.
Zusätzliche Informationen
-
A. Ferrara, C. Hametner:
"Rule-Based Energy Management Strategy of Fuel Cell/Ultracapacitor/Battery Vehicles: winner of the IEEE VTS Motor Vehicles Challenge 2020";
Vortrag: 2020 IEEE Vehicular Power and Propulsion Conference,
Gijon, Spanien;
18.11.2020
- 16.12.2020; in: "VPPC 2020",
(2020).
Zusätzliche Informationen
-
A. Ferrara, M. Okoli, S. Jakubek, C. Hametner:
"Energy Management of Heavy-Duty Fuel Cell Electric Vehicles: Model Predictive Control for Fuel Consumption and Lifetime Optimization";
Vortrag: 21st IFAC World Congress,
Berlin;
11.07.2020
- 19.07.2020; in: "Ifac Wc 2020",
IFAC-PapersOnLine,
Volume 53, Issue 2, 2020, Pages 14205-14210
(2020),
S. 14205
- 14210.
Zusätzliche Informationen
-
A Fichtinger, H. Ecker:
"Numercal and experimental comparison of the energy transfer in a parametrically excited system";
Vortrag: MoViC / RASD 2016 - 13th Int. Conf. on Motion and Vibration Control - 12th Int. Conf. on Recent Advances in Structural Dynamics,
Southampton,UK;
03.07.2016
- 06.07.2016; in: "Proc. of MoViC/RASD 2016",
(2016),
12 S.
-
M. Fichtinger, E. Talic, A. Schirrer:
"Quantification of phase and runtime errors in finite difference approximations of railway catenary systems";
Vortrag: 8th European Nonlinear Dynamics Conference ENOC 2014,
Wien;
06.07.2014
- 11.07.2014; in: "ENOC 2014",
H. Ecker, A. Steindl, S. Jakubek (Hrg.);
ENOC 2014 - Proceedings of 8th European Nonlinear Dynamics Conference,
(2014),
ISBN: 978-3-200-03433-4.
Zusätzliche Informationen
-
S. Floss, F. Czwielong, F. Krömer (geb. Zenger), S. Becker, M. Kaltenbacher:
"Achieving axial fan sound reduction with micro-perforated absorbers";
Vortrag: DAGA 2019,
Rostock;
18.03.2019
- 21.03.2019; in: "DAGA",
(2019),
S. 1410
- 1416.
-
S. Floss, M. Kaltenbacher:
"Application of an equivalent fluid model for the simulation of sound absorption properties of microperforated panels in 3D environments";
Vortrag: ICTCA 2017,
Wien;
30.07.2017
- 03.08.2017; in: "ICTCA 2017",
(2017),
ISBN: 978-3-200-05210-9;
S. 270.
-
S. Floss, M. Kaltenbacher:
"Finite element scheme based on an equivalent fluid model for the design of Micro-Perforated Panel Absorbers";
Vortrag: Internoise 2019,
Madrid;
16.06.2019
- 19.06.2019; in: "Internoise 2019",
(2019).
Zusätzliche Informationen
-
G. Fuchs, J. Kopriva, M. Kraus, M. Kozek:
"Application of the Modern Taylor Series Method to a Multi-Torsion Chain";
Vortrag: EUROSIM 2010,
Prag;
06.09.2010
- 10.09.2010; in: "Proceedings of the 7th EUROSIM Congress on Modelling and Simulation",
(2010),
ISBN: 978-80-01-04589-3;
7 S.
Zusätzliche Informationen
-
G. Fuchs, A. Steindl, S. Jakubek:
"Order Reduction for a Realtime Engine Model Using Flat and Nonlinear Galerkin Methods";
Vortrag: European Conference of Systems (ECS '10),
Puerto de la Cruz;
30.11.2010
- 02.12.2010; in: "Advances in Communications, Computers, Systems, Circuits and Devices",
V. Mladenov, K. Psarris, N. Mastorakis, A. Caballero, G. Vachtsevanos (Hrg.);
WSEAS Press,
(2010),
ISBN: 978-960-474-250-9;
S. 255
- 260.
Zusätzliche Informationen
-
F. Fuhrmann, A. Schirrer, M. Kozek:
"MPC for Process Heat Supply Systems: Considering load prediction uncertainty caused by human operators";
Vortrag: 30th European Symposium on Computer Aided Process Engineering,
Mailand;
24.05.2020
- 27.05.2020; in: "Proceedings of the 30th European Symposium on Computer Aided Process Engineering",
Elsevier B.V.,
Volume 48
(2020),
ISSN: 1570-7946;
S. 1219
- 1224.
Zusätzliche Informationen
-
F. Fuhrmann, A. Schirrer, M. Kozek, S. Jakubek:
"Prediction of pulsed heat loads in manufacturing plants";
Vortrag: IFAC World Congress 2020,
Berlin;
11.07.2020
- 17.07.2020; in: "IFAC-PapersOnLine",
IFAC-PapersOnLine,
Volume 53, Issue 2
(2020),
S. 10449
- 10454.
Zusätzliche Informationen
-
F. Gassenmeyer, H. Husstedt, M. Kaltenbacher:
"A Finite Element Approach to Evaluate the Validity of Real-Ear Measurements as an Auditory Reference in Occluded Human Ears";
Vortrag: DAGA 2018 Tagungsband,
München;
19.03.2018
- 22.03.2018; in: "DAGA 2018 Tagungsband",
(2018),
ISBN: 978-3-939296-13-3;
S. 1415
- 1418.
-
R. Genser:
"Critical Infrastructure";
Vortrag: IFAC Conference on Supplemental Ways for Improving International Stability through Automation ISA'06,
Prishtina, Kosovo;
15.06.2006
- 17.06.2006; in: "Improving Stability in Developing Nations Through Automation 2006 - A Proceedings Volume from the IFAC Conference on Supplemental Ways for Improving International Stability through Automation ISA'06",
(2006),
ISBN: 9780080454061;
S. 49
- 53.
-
R. Genser:
"Goals in complex Developments";
Vortrag: IFAC Multitrack Conference on Advanced Control Strategies for Social and Economic Systems ACS'04,
Vienna University of Technology,Vienna, Austria;
02.09.2004
- 04.09.2004; in: "IFAC Multitrack Conference on Advanced Control Strategies for Social and Economic Systems ACS'04-FINAL PROGRAM & ABSTRACT BOOK",
(2004),
ISBN: 3-902161-03-5;
5 S.
-
W. Geyrhofer, B. Voglauer, H. Jörgl:
"Control of a Roasting Process for the Recovery of Vanadium";
Vortrag: 2003 IEEE International Conference on Control Applications,
Istanbul, Turkey;
23.06.2003
- 25.06.2003; in: "Proceedings of the 2003 IEEE International Conference on Control Applications",
IEEE Control Systems Society,
03CH37418C
(2003),
ISBN: 0-7803-7730-3;
4 S.
Zusätzliche Informationen
-
M. Gföhler, T. Angeli, P. Lugner:
"Adjustment of Individual Stimulation Parameters for FES Cycling.";
Poster: 4th World Congress on Biomechanics,
Calgary;
03.08.2002
- 08.08.2002; in: "Proc. 4th World Congress on Biomechanics",
(2002),
S. 1
- 2.
-
M. Gföhler, T. Angeli, P. Lugner:
"Cycling by Means of FES - Simulation and Practical Application. ";
Vortrag: 4th World Congress on Biomechanics,
Calgary (eingeladen);
03.08.2002
- 08.08.2002; in: "Proc. 4th World Congress on Biomechanics, ",
(2002),
S. 1
- 2.
-
M. Gföhler, T. Angeli, P. Lugner:
"Modeling of Artificially Activated Muscle and Application to FES Cycling";
Vortrag: 12th International Conference on Mechanics in Medicine and Biology,
Greece;
09.09.2002
- 13.09.2002; in: "International Conference on Mechanics in Medicine and Biology",
Greece
(2002),
S. 93
- 99.
-
M. Gföhler, J. Wassermann, T. Kakebeeke, H. Lechner, W. Reichenfelser, T. Angeli:
"Muscle behavior in artificially activated muscle - Measurements on neurologically intact and paraplegic subjects";
Vortrag: International Society of Biomechanics XIXth Congress,
Dunedin, NZ;
06.07.2003
- 11.07.2003; in: "Proceedings",
P. Milburn, B. Wilson, T. Yanai (Hrg.);
(2003),
5 S.
-
C. Glacer, A. Dehé, D. Tumpold, R. Laur:
"Silicon Microspeaker with out-of-plane Displacement";
Vortrag: The 9th IEEE international conference on Nano/Micro Engineered and Molecular Systems,
Waiki Beach, Hawaii, USA;
13.04.2014
- 16.04.2014; in: "IEEE-NEMS 2014",
(2014),
S. 1
- 5.
Zusätzliche Informationen
-
C. Glacer, D. Tumpold, R. Rainer, A. Dehé:
"Capacitive out of plane large stroke MEMS structure";
Vortrag: PRIME 2013 9th Conference on Ph. D. Research in Microelectronics and Electronics,
Villach;
24.06.2013
- 27.06.2013; in: "Conference Proceedings PRIME2013 9th Conference on Ph. D. Research in Microelectronics and Electronics",
IEEE Operations Center, 445 Hoes Lane, NJ 08854,
CFP13622-PRT
(2013),
ISBN: 978-1-4673-4580-4;
S. 125
- 128.
Zusätzliche Informationen
-
G Görtler, H. Jörgl:
"Energetically optimized Control of an Electric Arc Furnace";
Vortrag: 2004 IEEE International Conference on Control Applications,
Taipei, Taiwan;
02.09.2004
- 04.09.2004; in: "Proceedings of the 2004 IEEE International Conference on Control Applications",
(2004),
ISBN: 0-7803-8634-5;
S. 137
- 142.
-
S. Gombots, F. Egner, M. Kaltenbacher:
"Beamforming with Kinect V2";
Vortrag: Tagungsband der 5.Tagung Innovation Messtechnik,
Wien;
11.05.2017; in: "Tagungsband der 5.Tagung Innovation Messtechnik",
(2017),
ISBN: 978-3-939296-12-6;
S. 76
- 81.
-
S. Gombots, M. Kaltenbacher:
"Study of the horn effect on curved surfaces";
Vortrag: DAGA 2017,
Kiel;
06.03.2017
- 09.03.2017; in: "DAGA 2017",
(2017),
ISBN: 978-3-939296-12-6;
S. 121
- 124.
-
S. Gombots, M. Kaltenbacher, B. Kaltenbacher:
"Combined Experimental-Simulation Based Acoustic Source Localization";
Vortrag: DAGA 2016,
Aachen;
14.03.2016
- 17.03.2016; in: "42. Jahrestagung für Akustik",
(2016),
S. 1092
- 1095.
-
S. Gombots, J. Nowak, M. Kaltenbacher, W. Bartolomaeus, F. Strigari:
"Tire-road noise measurements at the test rig of BASt";
Vortrag: DAGA 2018 Tagungsband,
München;
19.03.2018
- 22.03.2018; in: "DAGA 2018 Tagungsband",
(2018),
ISBN: 978-3-939296-13-3;
S. 1137
- 1140.
-
J. Grabinger, M. Kaltenbacher, B. Wohlmuth, R. Lerch:
"Validierung eines Finitre-Elemente-Verfahrens zur Berechnung der Schallausbreitung in rotierenden Systemen";
Vortrag: DAGA 2012,
Darmstadt;
19.03.2012
- 22.03.2012; in: "38. Deutsche Jahrestagung für Akkustik",
(2012),
S. 555
- 556.
-
B. Gross, M. Kozek, H. Jörgl:
"Identification and Inversion of Magnetic Hysteresis Using LabVIEW and Matlab";
Vortrag: International Symposium on Remote Engineering and Virtual Instrumentation 2004,
Villach;
10/2004; in: "International Symposium on Remote Engineering and Virtual Instrumentation",
Villach
(2004),
ISBN: 3-89958-090-7;
12 S.
Zusätzliche Informationen
-
S. Grosswindhager, A. Voigt, M. Kozek:
"Efficient Physical Modelling Of District Heating Networks";
Vortrag: 22nd IASTED International Symposia on Modelling and Simulation,
Calgary;
04.07.2011
- 06.07.2011; in: "Proceedings of the 22nd IASTED International Conference "Modelling and Simulation"",
(2011).
Zusätzliche Informationen
-
S. Grosswindhager, A. Voigt, M. Kozek:
"Linear Finite-Difference Schemes for Energy Transport in District Heating Networks";
Vortrag: CSSim2011, 2nd International Conference on Computer Modelling and Simulation,
Brno, Czech Republic;
05.09.2011
- 07.09.2011; in: "Proceedings of the 2nd International Conference on Computer Modelling and Simulation-CSSim2011",
(2011),
ISBN: 9788021443204;
S. 35
- 42.
Zusätzliche Informationen
-
S. Grosswindhager, A. Voigt, M. Kozek:
"Online Short-Term Forecast of System Heat Load in District Heating Networks";
Vortrag: 31st International Symposium on Forecasting,
Prag;
26.06.2011
- 29.06.2011; in: "ISF 2011 - Prague PROCEEDINGS",
(2011),
1997-41.
Zusätzliche Informationen
-
S. Grosswindhager, A. Voigt, M. Kozek:
"Predictive control of district heating network using Fuzzy DMC";
Vortrag: Fourth International Conference on Modelling, Identification and Control,
Wuhan, China;
24.06.2012
- 26.06.2012; in: "Proceedings of the Fourth International Conference on Modelling, Identification and Control",
(2012),
ISBN: 978-1-4673-1524-1;
Paper-Nr. ICMIC-228,
6 S.
Zusätzliche Informationen
-
P.G. Gruber, Y. Vetyukov, M. Krommer:
"Plastic Deformation of Axially Moving Continuum in Mixed Eulerian-Lagrangian Formulation";
Vortrag: 3rd Polish Congress of Mechanics & 21st Computer Methods in Mechanics,
Gdansk, Poland;
09/2015; in: "Proceedings of the PCM-CMM-2015 - 3rd Polish Congress of Mechanics & 21st Computer Methods in Mechanics",
M. Kleiber et al. (Hrg.);
(2015),
S. 57
- 58.
Zusätzliche Informationen
-
W. Gruber, T. Hinterdorfer, H. Sima, A. Schulz, J. Wassermann:
"Comparison of different motor-generator sets for long term storage flywheels";
Vortrag: 22nd International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM),
Ischia;
18.06.2014
- 20.06.2014; in: "International Symposium on Power Electronics, Electrical Drives, Automation and Motion",
(2014),
S. 161
- 166.
-
A Gusenkova, A. Steindl, H. Troger:
"On loss of stability of slow motions in stiff oscillatory systems";
Vortrag: GAMM 2004,
Dresden;
21.03.2004
- 27.03.2004; in: "GAMM Annual Meeting Dresden 2004",
PAMM/WILEY-VCH Verlag GmbH & Co.,
4
(2004),
2 S.
Zusätzliche Informationen
-
L. Haffner, M. Kozek, J. Shi:
"Comparison of two Methods for the Estimation of the Maximum Coefficient of Friction in a Cornering Maneuver of a Passenger Vehicle";
Vortrag: 9th International Symposium on Advanced Vehicle Control,
Kobe, Japan;
06.10.2008
- 09.10.2008; in: "Proceedings of the 9th International Symposium on Advanced Vehicle Control",
(2008),
ISBN: 978-4-904056-22-6;
Paper-Nr. 20080416,
6 S.
Zusätzliche Informationen
-
L. Haffner, M. Kozek, J. Shi, H. Jörgl:
"Estimation of the maximum friction coefficient for a passenger vehicle using the instantaneous cornering stiffness";
Vortrag: 2008 IEEE American Control Conference,
Seattle, Washington, USA;
11.06.2008
- 13.06.2008; in: "Proceedings of the 2008 IEEE American Control Conference",
(2008),
ISBN: 978-1-4244-2079-7;
Paper-Nr. FrB09.3,
6 S.
Zusätzliche Informationen
-
E. Hajrizi, P. Kopacek:
"Mechatronics Management and Robotics in Kosova";
Vortrag: Eighteenth International Conference "Robotics and Mechatronics" '08,
Varna, Bulgaria;
17.09.2008
- 21.09.2008; in: "Proceedings of the Eighteenth International Conference "Robotics and Mechatronics" '08",
(2008),
S. 212
- 215.
-
C. Hametner:
"Model based battery ageing data analysis and state of health observer design";
Vortrag: Advances in Simulation-Driven Optimization and Modeling (ASDOM 2014),
Reykjavik, Iceland (eingeladen);
08.08.2014
- 10.08.2014; in: "Advances in Simulation-Driven Optimization and Modeling (ASDOM 2014) Proceedings",
(2014),
22 S.
-
C. Hametner:
"Nonlinear Observer Design using Local Model Networks";
Vortrag: Advances in Simulation-Driven Optimization and Modeling (ASDOM 2013),
Reykjavik, Iceland (eingeladen);
09.08.2013
- 11.08.2013; in: "Advances in Simulation-Driven Optimization and Modeling (ASDOM 2013) Proceedings",
(2013),
26 S.
-
C. Hametner:
"Operating Regime Based Dynamic Engine Modelling";
Vortrag: Third International Workshop on Surrogate Modelling and Space Mapping For Engineering Optimization (SMSMEO 2012),
Reykjavik, Iceland (eingeladen);
09.08.2012
- 11.08.2012; in: "Proceedings of the Third International Workshop on Surrogate Modelling and Space Mapping For Engineering Optimization",
(2012).
Zusätzliche Informationen
-
C. Hametner, B. Brunnsteiner, W. Prochazka:
"Identification of capacity-loss prediction models of lithium-ion batteries";
Vortrag: 7th International Symposium on Energy,
Manchester, UK (eingeladen);
13.08.2017
- 17.08.2017; in: "Proceedings of 7th International Symposium on Energy",
(2017).
-
C. Hametner, S. Jakubek:
"Combustion Engine Modelling using an Evolving Local Model Network";
Vortrag: 2011 IEEE International Conference On Fuzzy Systems,
Taipei, Taiwan;
27.06.2011
- 30.06.2011; in: "Proceedings of the 2011 IEEE International Conference On Fuzzy Systems",
(2011),
ISBN: 978-1-4244-7316-8;
S. 2802
- 2807.
Zusätzliche Informationen
-
C. Hametner, S. Jakubek:
"Comparison of EM Algorithm and Particle Swarm Optimisation for Local Model Network Training";
Vortrag: 2010 IEEE Conference on Cybernetics and Intelligent Systems (CIS),
Singapur;
28.06.2010
- 30.06.2010; in: "Proceedings of the 2010 IEEE Conference on Cybernetics and Intelligent Systems (CIS)",
(2010),
6 S.
Zusätzliche Informationen
-
C. Hametner, S. Jakubek:
"Engine Model Identification Using Local Model Networks in Comparison with a Multilayer Perceptron Network";
Vortrag: International Symposium on Models and Modeling Methodologies in Science and Engineering: MMMse 2011,
Orlando, Florida, USA;
27.03.2011
- 30.03.2011; in: "Proceedings of the International Symposium on Models and Modeling Methodologies in Science and Engineering in Science and Engineering (MMMSE 2011)",
(2011),
ISBN: 9781936338221.
Zusätzliche Informationen
-
C. Hametner, S. Jakubek:
"Fuzzy Observer Design for Local Model Network based Battery State of Charge Estimation";
Vortrag: 21st Mediterranean Conference on Control & Automation,
Platanias-Chania, Crete, Greece;
25.06.2013
- 28.06.2013; in: "Proceedings of the 21st Mediterranean Conference on Control & Automation",
(2013),
ISBN: 978-1-4799-0995-7;
S. 265
- 270.
Zusätzliche Informationen
-
C. Hametner, S. Jakubek:
"Neuro-Fuzzy Modelling Using a Logistic Discriminant Tree";
Vortrag: American Control Conference 2007,
New York City, USA;
11.07.2007
- 13.07.2007; in: "Proceedings of the 2007 American Control Conference",
(2007),
ISBN: 1-4244-0989-6;
Paper-Nr. WeB04.6,
6 S.
Zusätzliche Informationen
-
C. Hametner, S. Jakubek:
"New concepts for the identification of dynamic Takagi-Sugeno Fuzzy models";
Vortrag: 2nd IEEE International Conference on Cybernetics & Intelligent Systems,
Bangkok, Thailand;
07.06.2006
- 09.06.2006; in: "2nd IEEE International Conference on Cybernetics & Intelligent Systems",
(2006),
ISBN: 1-4244-0023-6;
Paper-Nr. P0253,
6 S.
Zusätzliche Informationen
-
C. Hametner, S. Jakubek:
"Nonlinear Dynamic MISO Identification in a Complex Noisy Environment";
Vortrag: Chinese Control Conference,
Kunming, Yunnan, China;
16.07.2008
- 18.07.2008; in: "Proceedings of the 27th Chinese Control Conference",
(2008),
ISBN: 9787900719706;
6 S.
Zusätzliche Informationen
-
C. Hametner, S. Jakubek:
"Optimisation Of Relative Error Criteria In Nonlinear Neuro-Fuzzy Identification";
Vortrag: 20th IASTED International Conference "Modelling and Simulation",
Banff;
06.07.2009
- 08.07.2009; in: "Proceedings of the 20th IASTED International Conference "Modelling and Simulation"",
(2009),
ISBN: 978-0-88986-799-4;
Paper-Nr. 670-071,
6 S.
Zusätzliche Informationen
-
C. Hametner, S. Jakubek:
"Spezielle Parameterschätzverfahren in lokalen Modellnetzwerken zur Identifikation nichtlinearer Systeme";
Vortrag: GAMM-GMA Tagung,
Salzburg;
23.09.2009
- 25.09.2009; in: "Modellbildung, Identfikation und Simulation in der Automatisierungstechnik",
B. Lohmann, A. Kugi (Hrg.);
(2009),
16 S.
Zusätzliche Informationen
-
C. Hametner, S. Jakubek, N. Keuth, H. Pflügl:
"Dynamic Engine Modelling Using Local Model Networks";
Vortrag: Design of Experiments (DoE) in Engine Developement,
Berlin;
23.05.2011
- 24.05.2011; in: "Design of Experiments (DoE) in Engine Developement",
Expert Verlag,
6/Renningen, Deutschland
(2011),
ISBN: 978-3-8169-3074-7.
Zusätzliche Informationen
-
C. Hametner, S. Jakubek, N. Keuth, A. Suljanovic:
"Entwurfsmethodik für nichtlineare Beobachter zur Ladezustandsschätzung von Li-Ionen Batterien";
Vortrag: 5. Internationales Symposium Entwicklungsmethodik,
Wiesbaden;
22.10.2013
- 23.10.2013; in: "5. Internationales Symposium Entwicklungsmethodik",
(2013),
ISBN: 978-3-00-039633-5;
S. 116
- 123.
-
C. Hametner, S. Jakubek, N. Keuth, A. Suljanovic:
"Nonlinear observer design for state of charge estimation of Lithium Ion cells";
Vortrag: The Battery Show & Electric & Hybrid Vehicle Technology Conference,
Novi, Michigan;
17.09.2013
- 19.09.2013; in: "The Battery Show & Electric & Hybrid Vehicle Technology Conference Proceedings",
(2013),
14 S.
-
C. Hametner, S. Jakubek, W. Prochazka:
"Data-driven design of a cascaded observer for battery state of health estimation";
Vortrag: 4th IEEE International Conference on Sustainable Energy Technologies,
Hanoi, Vietnam;
14.11.2016
- 16.11.2016; in: "Proceedings of the 4th IEEE International Conference on Sustainable Energy Technologies",
(2016),
S. 162
- 167.
Zusätzliche Informationen
-
C. Hametner, M. Kneissl, M. Dohr:
"Battery state of health estimation based on the identification of continuous-time impedance models";
Vortrag: IEEE Vehicle Power and Propulsion Conference 2019,
Hanoi, Vietnam;
14.10.2019
- 17.10.2019; in: "2019 IEEE Vehicle Power and Propulsion Conference (VPPC)",
(2019).
-
C. Hametner, W. Prochazka, S. Jakubek, A. Suljanovic:
"Model based Lithium Ion cell ageing data analysis";
Vortrag: 2014 IEEE International Conference on Fuzzy Systems (FUZZ-IEEE),
Beijing, China;
06.07.2014
- 11.07.2014; in: "Proceedings of the IEEE International Conference on Fuzzy Systems (FUZZ-IEEE 2014)",
(2014),
ISBN: 978-1-4799-2072-3;
S. 962
- 967.
Zusätzliche Informationen
-
C. Hametner, J. Unger, S. Jakubek:
"Local Model Network based Dynamic Battery Cell Model Identification";
Vortrag: 12th WSEAS International Conference on ROBOTICS, CONTROL and MANUFACTURING TECHNOLOGY (ROCOM'12),
Rovaniemi Finnland;
18.04.2012
- 20.04.2012; in: "Proceedings of the 12th WSEAS International Conference on ROBOTICS, CONTROL and MANUFACTURING TECHNOLOGY",
(2012),
ISBN: 978-1-61804-085-5;
S. 116
- 123.
Zusätzliche Informationen
-
M. Han:
"Robot Soccer and Edutainment";
Vortrag: Fira Robot World Congress 2003,
Messe Congress Center, Wien, Österreich;
01.10.2003
- 03.10.2003; in: "Proceedings of the 2nd Fira Robot Soccer World Congress Volume 2",
Messe Congress Center, Wien, Österreich
(2003),
ISBN: 3-902161-01-9;
S. 45
- 49.
-
M. Han:
"Robot Soccer and Edutainment";
Vortrag: 2004 Korea-Austria Joint Seminar on Intelligent Robotics (während 2004 FIRA Robot World Congress),
Bexco, Busan, Korea;
28.10.2004
- 28.10.2004; in: "2004 Korea-Austria Joint Seminar on Intelligent Robotics",
(2004),
S. 20
- 25.
-
M. Han:
"Robotsoccer and Edutainment";
Vortrag: CLAWAR / EURON / IARP Workshop on Robots in Entertainment, Leisure and Hobby - ELH'04,
Vienna University of Technology, Vienna, Austria;
02.12.2004
- 04.12.2004; in: "CLAWAR / EURON / IARP Workshop on Robots in Entertainment, Leisure and Hobby - ELH'04 Proceedings",
Institut für Mechanik und Mechatronik / Abt. 6 Intelligente Handhabungs- und Robotertechnik,
TU Wien, Wien, Österreich
(2004),
ISBN: 3-902161-04-3.
-
M. Han:
"Strategies and Prediction in Multi-Agent Systems";
Vortrag: IFAC Conference on Supplemental Ways for Improving International Stability through Automation ISA'06,
Prishtina, Kosovo;
15.06.2006
- 17.06.2006; in: "Improving Stability in Developing Nations Through Automation 2006 - A Proceedings Volume from the IFAC Conference on Supplemental Ways for Improving International Stability through Automation ISA'06",
(2006),
ISBN: 9780080454061;
S. 107
- 111.
-
M. Han, G. Klancar, I. Skrjanc:
"Contribution to the Navigation of Mobile Robots";
Vortrag: eAROB,
TU Wien, Wien, Österreich;
13.07.2007
- 14.07.2007; in: "Proceedings of the First European Workshop on Artificial Life and Robots - eAROB",
(2007).
-
M. Han, P. Kopacek:
"Model Based Controller with Neural Network Disturbance Estimation ";
Vortrag: 8. Fuzzy Days in Dortmund,
Dortmund, Deutschland;
29.09.2004
- 01.10.2004; in: "Computational Intelligence, Theory and Applications, Springer series "Advances in Soft Computing", Proceedings of the 8th Fuzzy Days ",
(2004).
-
M. Han, P. Kopacek:
"New Concepts for humanoid Robots";
Vortrag: FIRA Robo World Congress 2006,
Dortmund, Germany;
30.06.2006
- 01.07.2006; in: "Proceedings of the FIRA Robo World Congress 2006",
(2006),
ISBN: 3-00-019061-9;
S. 108
- 111.
-
M. Han, P. Kopacek, B. Kopacek:
"End Of Life Management of Automation Devices";
Vortrag: Going Green - CARE INNOVATION 2006,
Vienna, Austria;
13.11.2006
- 16.11.2006; in: "Going Green - CARE INNOVATION 2006 - From WEEE/RoHS Implementation to Future Sustainable Electronics - Proceedings",
(2006),
ISSN: 1562-2703.
-
M. Han, P. Kopacek, B. Putz:
"Development of Mobile Mini Robots for Space Application";
Vortrag: 37th International Symposium on Robotics ISR 2006 and 4th German Conference on Robotics ROBOTIK 2006,
Munich, Germany;
15.05.2006
- 17.05.2006; in: "Proceedings of the 37th International Symposium on Robotics ISR 2006 and 4th German Conference on Robotics ROBOTIK 2006",
(2006),
ISBN: 3-18-091956-6;
S. 209.
-
M. Han, P. Kopacek, B. Putz, M. Würzl, E. Schierer:
"Robot Soccer - A First Step to Edutainment";
Vortrag: RAAD - 12th International Workshop on Robotics in Alpe-Adria-Danube Region,
Cassino, Italy;
07.05.2003
- 10.05.2003; in: "Proceedings of RAAD'03",
Cassino, Italy
(2003),
6 S.
-
E. Hansy-Staudigl, M. Krommer, Y. Vetyukov:
"Modeling Electro-Active Dielectric And Electrostrictive Elastomer Plates In The Framework Of Nonlinear Structural Electro-Mechanics";
Vortrag: Vienna Young Scientists Symposium VSS 2018,
Wien;
07.06.2018
- 08.06.2018; in: "Proc. of VIENNA young SCIENTISTS SYMPOSIUM 2018",
(2018),
S. 112
- 113.
-
E. Hansy-Staudigl, M. Krommer, Y. Vetyukov:
"Nonlinear Modelling Of Dielectric Elastomer Single Layer Plates Using A Multiplicative Decomposition Of The Deformation Gradient To Account For Electrostriction";
Vortrag: VIII ECCOMAS Thematic Conference on Smart Structures and Materials - SMART 2017,
Madrid;
05.06.2017
- 08.06.2017; in: "Proc. of VIII ECCOMAS Thematic Conference on Smart Structures and Materials - SMART 2017",
A. Güemes, A. Benjeddou, J. Rodellar, J. Leng (Hrg.);
CIMNE,
(2017),
12 S.
Zusätzliche Informationen
-
E. Hansy-Staudigl, M. Krommer, Y. Vetyukov, A. Humer:
"Modeling electro-elastic coupling phenomena in electrostrictive polymers in the context of structural mechanics";
Vortrag: GAMM 2019 - 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics,
Universität Wien, Austria;
18.02.2019
- 22.02.2019; in: "PAMM",
Wiley,
(2019),
S. 1
- 2.
Zusätzliche Informationen
-
E. Hansy-Staudigl, M. Krommer, Y. Vetyukov, A. Humer:
"Nonlinear electro-elastic modeling of thin dielectric elastomer plate actuators";
Vortrag: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring 2018,
Denver, CO, U.S.A.;
27.03.2018; in: "Proc. SPIE 10594, Electroactive Polymer Actuators and Devices (EAPAD) XX",
SPIE,
10594
(2018),
S. 1
- 10.
Zusätzliche Informationen
-
S. Hartl, A. Schulz, M. Kaltenbacher:
"Design Of A Carbon Fiber Reinforced Plastic Shaft For A High Speed Flywheel Rotor";
Vortrag: ICCM20 International Conference on Composite Materials,
Copenhagen (eingeladen);
19.07.2015
- 24.07.2015; in: "ICCM20 Interantional Conference on Composite Materials",
(2015),
S. 1
- 11.
-
S. Hartl, A. Schulz, M. Kaltenbacher:
"Direct Estimation of the Elastic Constants of CFRP Plates by using Lagrange´s Equation";
Vortrag: ICCS18 International Conference on Composite Structures,
Lisbon (eingeladen);
15.06.2015
- 18.06.2015; in: "ICCS18 International Conference on Composite Structures",
ICCS18 International Conference on Composite Structures,
(2015),
S. 201
- 202.
-
M. Haskul, E. Arslan:
"Isıl ve mekanik yük altındaki eğri eksenli panelde oluşan elastik gerilmeler";
Vortrag: 19. Ulusal Mekanik Kongresi,
Trabzon;
24.08.2015
- 28.08.2015; in: "Book of 19. Ulusal Mekanik Kongresi",
(2015),
S. 536
- 543.
-
A. Hauck, M. Ertl, J. Schöberl, M. Kaltenbacher:
"Accurate Magnetostatic Simulation of Step-Lap Joints in Transformer Cores Using Anisotropic Higher Order FEM";
Vortrag: The 15 International IGTE Symposium on Numerical Field Calculation in Electrical Engineering,
Graz;
17.09.2012
- 19.09.2012; in: "The 15 International IGTE Symposium on Numerical Field Calculation in Electrical Engineering",
Verlag der Technischen Universität Graz,
Graz
(2012),
ISBN: 978-3-85125-258-3;
S. 226
- 231.
-
F. Hausberg, S. Hecker, P. Pfeffer, M. Plöchl, M. Rupp:
"Incorporation of Adaptive Grid-Based Look-Up Tables in Adaptive Feedforward Algorithms for Active Engine Mounts";
Vortrag: 12th International Symposium on Advanced Vehicle Control,
Tokio, Japan;
22.09.2014
- 26.09.2014; in: "Proceedings 12th International Symposium on Advanced Vehicle Control",
(2014),
S. 535
- 540.
Zusätzliche Informationen
-
F. Hausberg, S. Vollmann, P. E. Pfeffer, S. Hecker, M. Plöchl, T. Kolkhorst:
"Improving the convergence behavior of active engine mounts in vehicles with cylinder-on-demand engines";
Vortrag: 42nd International Congress and Exposition on Noise Control Engineering,
Innsbruck;
15.09.2013
- 18.09.2013; in: "Internoise 2013",
(2013),
Paper-Nr. 1048,
9 S.
-
B. Heinzl, M. Rößler, A. Körner, G. Zauner, H. Ecker, F. Breitenecker:
"BCP - A Benchmark for Teaching Structural Dynamical Systems";
Vortrag: MATHMOD 2012 - 7th Vienna Conference on Mathematical Modelling,
Wien;
14.02.2012
- 17.02.2012; in: "Preprints Mathmod 2012 Vienna - Full Paper Volume",
F. Breitenecker, I. Troch (Hrg.);
Argesim / Asim,
38
(2012),
S. 254
- 255.
Zusätzliche Informationen
-
S. Helm, B. Schneeweiss, S. Winter, M. Kozek:
"Hardware in the loop simulation of a hybrid power train";
Vortrag: 2008 International Simulation Multi-conference,
Edinburgh, Scotland;
16.06.2008
- 19.06.2008; in: "Proceedings od the 2008 International Simulation Multi-conference",
(2008),
ISBN: 1-56555-320-9;
6 S.
Zusätzliche Informationen
-
S. Helm, S. Winter, M. Kozek:
"A dynamic hybrid model of a vehicle clutch for HiL applications";
Vortrag: 6th Vienna Mathmod 09,
Vienna;
11.02.2009
- 13.02.2009; in: "Proceedings of the 6th Mathmod Vienna 09",
Argesim Report,
No. 35
(2009),
ISBN: 978-3-901608-35-3;
Paper-Nr. 258,
7 S.
Zusätzliche Informationen
-
M. Hemedi, A. Schirrer, M. Kozek:
"Comparison of LQ-optimal actuator / sensor selection approaches for flexible structure systems";
Vortrag: 9th International Conference On Mathematical Problems In Engineering, Aerospace And Sciences: ICNPAA 2012,
Vienna, Austria;
10.07.2012
- 14.07.2012; in: "Vol. 1493 - 9th International Conference On Mathematical Problems In Engineering, Aerospace And Sciences: ICNPAA 2012",
College Park, MD, USA
(2012),
ISBN: 978-0-7354-1105-0;
S. 459
- 466.
Zusätzliche Informationen
-
M. Hemedi, A. Schirrer, C. Westermayer, M. Kozek:
"Integrated input-output selection strategy for robust control of complex parameter varying systems";
Vortrag: 10th International Conference on Motion and Vibration Control (MOVIC 2010),
Tokyo, Japan;
17.08.2010
- 20.08.2010; in: "Proceedings of the 10th International Conference on Motion and Vibration Control",
Japan Society of Mechanical Engineers JSME,
No. 10-203, Tokyo, Japan
(2010),
Paper-Nr. 3B13,
11 S.
Zusätzliche Informationen
-
M. Hemedi, A. Schirrer, C. Westermayer, M. Kozek:
"Performance evaluation of an input/output selection criterion via normalized LQG closed-loop comparison";
Vortrag: 17th IEEE Mediterranean Conference on Control & Automation,
Thessaloniki, Greece;
24.06.2009
- 26.06.2009; in: "Proceedings of the 17th IEEE Mediterranean Conference on Control & Automation",
(2009),
ISBN: 978-1-4244-4685-8;
Paper-Nr. ThC6.3,
6 S.
Zusätzliche Informationen
-
T. Hinterdorfer, A. Schulz, H. Sima:
"Force prediction and radial force compensation of a switched reluctance motor";
Vortrag: Industrial Electronics Society, IECON 2013 - 39th Annual Conference of the IEEE,
Wien;
11.11.2013
- 13.11.2013; in: "Industrial Electronics Society, IECON 2013 - 39th Annual Conference of the IEEE",
(2013),
ISSN: 1553-572x;
S. 2875
- 2880.
-
T. Hinterdorfer, A. Schulz, H. Sima, S. Hartl, J. Wassermann:
"Compensation of Unbalance Forces of a Switched Reluctance Machine with Combined Current and Fluxlinkage Control";
Vortrag: 14th International Symposium in Magnetic Bearings,
Linz;
11.08.2014
- 14.08.2014; in: "Proceedings of ISMB14",
(2014),
S. 766
- 771.
-
T. Hinterdorfer, A. Schulz, H. Sima, S. Hartl, J. Wassermann:
"Topology Optimization of a Flywheel Energy Storage Rotor Using a Genetic Algorithm";
Vortrag: 14th International Symposium in Magnetic Bearings,
Linz;
11.08.2014
- 14.08.2014; in: "Proceedings of ISMB14",
(2014),
S. 347
- 352.
-
M. Hirschmanner, H. Springer:
"Adaptive Vibration and Unbalance Control of a Rotor Supported by Active Magnetic Bearings";
Vortrag: Eighth International Symposium on Magnetic Bearings,
Mito, Japan;
26.08.2002
- 28.08.2002; in: "Proceedings of The Eighth International Symposium on Magnetic Bearings (ISMB-8)",
(2002),
S. 483
- 488.
Zusätzliche Informationen
-
M. Hirschmanner, N. Steinschaden, H. Springer:
"Adaptive Control of a Rotor Excited by Destabilizing Cross-Coupling Forces";
Vortrag: IFToMM Sixth International Conference on Rotor Dynamics,
Sydney, Australia;
30.09.2002
- 04.10.2002; in: "Proceedings Sixth International Conference on Rotor Dynamics",
(2002),
ISBN: 0733419631;
S. 38
- 45.
Zusätzliche Informationen
-
W. Hofbauer, P. Dolovai, H. Jörgl et al.:
"Kalman-Bucy-Filter Design for a Gas Engine";
Vortrag: IASTED 8th Conference on "Intelligent Systems and Control",
Cambridge, MA, USA;
31.10.2005
- 02.11.2005; in: "Intelligent Systems and Control",
W. Hofbauer (Hrg.);
IASTED,
497
(2005),
ISBN: 0-88986-519-1;
Paper-Nr. 084,
6 S.
Zusätzliche Informationen
-
W. Hofbauer, P. Dolovai, H. Jörgl, J. Hirzinger:
"LQG/LTR Controller Design for a Gas Engine";
Vortrag: Proceedings of the ISIE 2006,
Montreal;
09.07.2006
- 13.07.2006; in: "Proceedings of the ISIE 2006",
(2006),
6 S.
Zusätzliche Informationen
-
R. Hofstädter, M. Kozek:
"Extension of a Thermal Simulation Model for a Tram and Simulation with On-Site Measurement Data";
Vortrag: MATHMOD 2012 - 7th Vienna International Conference on Mathematical Modelling,
Wien/AT;
14.02.2012
- 17.02.2012; in: "Preprints Mathmod 2012 Vienna, Abstract Volume",
(2012),
S. 78.
Zusätzliche Informationen
-
R. Hofstädter, M. Kozek:
"Holistic Thermal Simulation Model of a Tram";
Vortrag: CSSim2011, 2nd International Conference on Computer Modelling and Simulation,
Brno, Czech Republic;
05.09.2011
- 07.09.2011; in: "Proceedings of the 2nd International Conference on Computer Modelling and Simulation-CSSim2011",
(2011),
ISBN: 9788021443204;
8 S.
Zusätzliche Informationen
-
R. Hofstädter, M. Kozek, G. Richter:
"Modular thermodynamic modelling of a light rail vehicle";
Vortrag: Railways and Environment,
Delft;
16.12.2010
- 17.12.2010; in: "Book of extendes abstracts",
(2010),
ISBN: 978-94-91085-02-4;
S. 100
- 102.
Zusätzliche Informationen
-
K. Hollaus, J. Schöberl, H. Silm, M. Kaltenbacher:
"Multiscale Finite Element Method for the Eddy Current Problem in Iron Laminates";
Vortrag: MSHOM 2016 Advances in Multiscale Methods and Homogenization for Laminates and Windings in Magnetic Fields,
TU Wien;
22.09.2016
- 23.09.2016; in: "Workshop MSHOM 2016",
K. Hollaus (Hrg.);
(2016),
S. 7
- 8.
Zusätzliche Informationen
-
S. Horngacher, M. Kozek:
"Modelling of air pressure dynamics for clean room facilities";
Vortrag: 6th Vienna Mathmod 09,
Vienna;
11.02.2009
- 13.02.2009; in: "Proceedings of the 6th Mathmod Vienna 09",
Argesim Report,
No. 35
(2009),
ISBN: 978-3-901608-35-3;
Paper-Nr. 200,
9 S.
Zusätzliche Informationen
-
A. Huber, M. Vincze, W. Netzer, A. Rodriguez Mustelier, L. Silberbauer:
"TAUROB tracker: A Remotely Operated Robot with a Biological Inspired Steering Assistance System";
Vortrag: Austrian Robotics Workshop (ARW),
Graz. Austria;
03.05.2012
- 04.05.2012; in: "Proc. of the Austrian Robotics Workshop 2012",
(2012),
6 S.
-
A. Hüppe, M. De Gennaro, M. Kaltenbacher, H. Kuehnelt:
"Aeroacoustic Investigation Of An Airfoil Using A Mixed Finite Element Scheme";
Vortrag: 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012),
University of Vienna;
10.09.2012
- 14.09.2012; in: "CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), September 10-14, 2012, Vienna, Austria",
(2012),
ISBN: 978-3-9502481-9-7;
S. 1
- 17.
-
A. Hüppe, M. Kaltenbacher:
"Accuracy of Aeroacoustic Analogies Inside the Flow Region";
Vortrag: AIA-DAGA 2013,
Meran;
18.03.2012
- 21.03.2012; in: "Proceedings of the International Conference on Acoustics, AIA-DAGA 2013",
Deutsche Gesellschaft für Akustik e.V. (DEGA),
Berlin
(2013),
ISBN: 978-3-939296-05-8;
S. 843
- 846.
-
A. Hüppe, M. Kaltenbacher:
"Investigation of Interpolation Strategies for Hybrid Schemes in Computational Aeroacoustics";
Vortrag: DAGA 2015,
Nürnberg (eingeladen);
16.03.2015
- 19.03.2015; in: "41. Jahrestagung für Akustik",
(2015),
S. 872
- 875.
-
A. Hüppe, M. Kaltenbacher:
"Spectral finite elements for computational aeroacoustics based on perturbation equations";
Vortrag: Proceedings of the 10th International Conference on Theoretical and Computational Acoustics,
Taiwan;
25.04.2012
- 28.04.2012; in: "Proceedings of the 10th International Conference on Theoretical and Computational Acoustics",
C. Chen (Hrg.);
(2012).
-
A. Hüppe, M. Kaltenbacher, A. Reppenhagen:
"Aeroacoustic sound computation of a generic side mirror using spectral finite Elements";
Vortrag: DAGA 2012,
Darmstadt;
19.03.2012
- 22.03.2012; in: "38. Deutsche Jahrestagung für Akkustik",
(2012),
S. 573
- 574.
-
H. Husstedt, U. Ausserlechner, M. Kaltenbacher:
"Accurate Measurement Setup for Strongly Inhomogenous Magnetic Fields";
Vortrag: Sensor+Test Conference,
Nürnberg;
07.06.2011
- 09.06.2011; in: "Sensor+Test Conference 2011 Proceedings",
AMA Service GmbH,
(2011),
ISBN: 978-3-9810993-9-3;
S. 343
- 348.
-
H. Husstedt, U. Ausserlechner, M. Kaltenbacher:
"In-situ measurement of curvature and mechanical stress of packaged silicon";
Vortrag: IEEE Sensors Conference,
Waikoloa;
01.11.2010
- 04.11.2010; in: "IEEE Sensors 2010 Conference",
IEEE,
Hawaii
(2010),
ISBN: 978-1-4244-8170-5;
S. 2563
- 2568.
Zusätzliche Informationen
-
H. Husstedt, U. Ausserlechner, M. Kaltenbacher:
"Measurement of a Multi-pole Encoder with a Magnetic and Coordinate Measuring Machine";
Vortrag: International Instrumentation and Measurement Technology Conference (I2MTC),
Graz;
13.05.2012
- 16.05.2012; in: "2012 IEEE International Instrumentation and Measurement Technology Conference (I2MTC 2012) Proceedings",
IEEE,
(2012),
ISSN: 1091-5281;
S. 2040
- 2044.
-
H. Husstedt, U. Ausserlechner, M. Kaltenbacher:
"Simulation of errors during the Calibration of a Magnetic and Coordinate Measuring Machine (MCMM)";
Vortrag: 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012),
University of Vienna;
10.09.2012
- 14.09.2012; in: "ECCOMAS 2012 - Congress Proceedings",
(2012),
ISBN: 978-3-9502481-9-7;
20 S.
-
S. Jakubek, C. Hametner:
"Nichtlineare Systemidentifikation durch lokale Modellansätze: Strategien zur Partitionierung und Parameterschätzung";
Vortrag: 16. Steirisches Seminar über Regelungstechnik und Prozessautomatisierung,
Retzhof (eingeladen);
08.09.2009
- 10.09.2009; in: "16. Steirisches Seminar über Regelungstechnik und Prozessautomatisierung",
(2009),
ISBN: 978-3-901439-08-7;
23 S.
Zusätzliche Informationen
-
S. Jakubek, N. Keuth:
"A new Training Algorithm for Neuro-Fuzzy Networks";
Vortrag: ICINCO 2005 (2nd internat. Conference on Informatics in Control, Automation and Robotics),
Barcelona;
14.09.2005
- 17.09.2006; in: "Proceedings of the 2005 ICINCO",
(2005).
Zusätzliche Informationen
-
S. Jakubek, M. Kozek:
"Model Predicitve Control in Smart-Grids";
Hauptvortrag: Dritte Fachkonferenz Kommunikation für Energiesysteme: ComForEn 2012,
Wels (eingeladen);
05.09.2012; in: "ComForEn 2012",
F. Kupzog (Hrg.);
Österreichischer Verband für Elektrotechnik,
(2012),
ISBN: 978-3-85133-072-4;
S. 49
- 56.
Zusätzliche Informationen
-
S. Jakubek, T. Strasser:
"Fault-Diagnosis Using Neural Networks with Ellipsoidal Basis Funcions";
Vortrag: 2002 American Control Conference,
Anchorage, AK, USA;
08.05.2002
- 10.05.2002; in: "Proceedings of the 2002 American Control Conference",
IEEE,
(2002),
ISBN: 0-7803-7298-0;
S. 3846
- 3851.
Zusätzliche Informationen
-
S. Jakubek, T. Strasser:
"Neural Networks applied to Automatic Fault Detection";
Vortrag: 45th IEEE Midwest Symposium on Circuits and Systems (MWSCAS 2002),
Tulsa, OK, USA (eingeladen);
05.08.2002
- 07.08.2002; in: "Proceedings of the 45th IEEE Midwest Symposium on Circuits and Systems (MWSCAS 2002)",
IEEE,
(2002),
ISBN: 0-7803-7523-8;
S. 639
- 642.
Zusätzliche Informationen
-
J. Jovanova, V. Gavriloski, A. Schirrer, M. Kozek:
"Multidisciplinary laboratory experiment for active vibration control with piezoelectric patches";
Vortrag: 2013 IEEE Global Engineering Education Conference (EDUCON),
Berlin;
13.03.2013
- 15.03.2013; in: "2013 IEEE Global Engineering Education Conference (EDUCON)",
(2013),
ISBN: 978-1-4673-6110-1;
S. 1093
- 1097.
Zusätzliche Informationen
-
C. Junger, A. Hüppe, M. Kaltenbacher:
"Acoustic and Aeroacoustic Inverstigation of a Generic Rotor Model";
Vortrag: DAGA 2015,
Nürnberg;
16.03.2015
- 19.03.2015; in: "41. Jahrestagung für Akustik",
(2015),
S. 438
- 439.
-
C. Junger, A. Hüppe, M. Kaltenbacher:
"Aeroacoustic Investigation of a Generic Rotor Model using a Hybrid Finite- Volume, Finite-Element Computational Scheme with sliding Mesh Interfaces";
Vortrag: 6th Congress of the Alps Adria Acoustic Association,
Graz;
16.10.2014
- 17.10.2014; in: "Proceedings of the 6th Congress of the Alps Adria Acoustic Association",
(2014),
6 S.
Zusätzliche Informationen
-
C. Junger, M. Kaltenbacher:
"Main Challenges in the Application of Hybrid Aeroacoustic Methods to Rotating Systems";
Vortrag: DAGA 2017,
Kiel;
06.03.2017
- 09.03.2017; in: "DAGA 2017",
(2017),
ISBN: 978-3-939296-12-6;
S. 932
- 935.
-
C. Junger, F. Zenger, A. Reppenhagen, M. Kaltenbacher, S. Becker:
"Numerical Simulation of a Benchmark Case for Aerodanamics and Aeroacoustics of a Low Pressure Axial Fan";
Vortrag: Inter-Noise 2016,
Hamburg;
21.08.2016
- 24.08.2016; in: "INTER-NOISE 2016",
(2016),
ISBN: 978-3-939296-11-9;
7 S.
Zusätzliche Informationen
-
R. Jurisits, A. Steindl:
"1:3 Internal Resonance of an Elastic Fluid-conveying Tube";
Vortrag: MATHMOD 2012 - 7th Vienna International Conference on Mathematical Modelling,
Wien/AT;
15.02.2012
- 17.02.2012; in: "Preprints Mathmod Vienna 2012 Abstract Volume",
ARGESIM / ASIM, German Simulation Society,
Report No. S38
(2012),
S. 342.
-
R. Jurisits, A. Steindl:
"Low order resonance of an elastic fluid-conveying tube";
Vortrag: 10th International Conference on Flow-Induced Vibration,
Dublin;
03.07.2012
- 06.07.2012; in: "Flow-induced Vibration",
C. Meskell, G. Bennett (Hrg.);
(2012),
ISBN: 978-0-9548583-4-6;
S. 7
- 13.
Zusätzliche Informationen
-
R. Jurisits, A. Steindl:
"Mode interactions and resonances of an elastic fluid-conveying tube";
Vortrag: GAMM - 82nd Annual Meeting of the International Association of Applied Mathematics and Mechanics,
Graz;
18.04.2011
- 21.04.2011; in: "Proceedings in Applied Mathematics and Mechanics (PAMM)",
G. Brenn, G. A. Holzapfel, M. Schanz, O. Steinbach (Hrg.);
Wiley-VCH,
Vol. 11, Issue 1, Weinheim
(2011),
2 S.
Zusätzliche Informationen
-
C. Kalteis, S. Thormann, A. Schirrer, S. Jakubek:
"Efficient methods to assess linear and non-linear automotive platoon control: stability and performance";
Vortrag: 11th International Conference on Structural Dynamics, EURODYN 2020,
Athen, Griechenland;
23.11.2020
- 26.11.2020; in: "EURODYN 2020",
National Technical University of Athens (NTUA),
Athens
(2020),
ISBN: 978-618-85072-2-7;
S. 748
- 757.
Zusätzliche Informationen
-
M. Kaltenbacher:
"Inverse Scheme for Acoustic Source Localization based on Adjoint Method";
Vortrag: 1st Alps-Adriatic Inverse Problems Workshop 2019,
Universität Klagenfurt;
07.11.2019
- 08.11.2019; in: "1st Alps-Adriatic Inverse Problems Workshop 2019",
(2019).
Zusätzliche Informationen
-
M. Kaltenbacher:
"Strömung-Struktur-Akustik Interaktion: Modellierung und Simulation";
Vortrag: DAGA 2015,
Nürnberg (eingeladen);
16.03.2015
- 19.03.2015; in: "41. Jahrestagung für Akustik",
(2015),
S. 11
- 14.
-
M. Kaltenbacher, S. Floss, J. Metzger:
"Non-conforming finite element method for efficiently computing multilayered microperforated plate absorbers";
Vortrag: Journal of the Acoustical Society of America 141,
Boston (eingeladen);
25.06.2017
- 29.06.2017; in: "Journal of the Acoustical Society of America 141",
(2017),
2 S.
Zusätzliche Informationen
-
M. Kaltenbacher, A. Hüppe:
"Advanced Finite Element Formulation for the Convective Wave Equation";
Vortrag: Euronoise 2018,
Kreta;
27.05.2018
- 31.05.2018; in: "Euronoise 2018",
(2018),
ISSN: 2226-5147;
S. 291
- 296.
Zusätzliche Informationen
-
M. Kaltenbacher, A. Hüppe, A. Reppenhagen, B. Brandstätter, S. Becker:
"Simulation Environment for the Computation of Aeroacoustic Noise Generated by Rotating Systems";
Vortrag: DAGA 2016,
Aachen (eingeladen);
14.03.2016
- 17.03.2016; in: "42. Jahrestagung für Akustik",
(2016),
S. 1444
- 1447.
-
M. Kaltenbacher, A. Hüppe, A. Reppenhagen, F. Zenger, S. Becker:
"Computational Aeroacoustics for Rotating Systems";
Vortrag: Aeroacoustics Conferences,
Lyon (eingeladen);
30.05.2016
- 01.06.2016; in: "22nd AIAA/CEAS Aeroacousitcs Conference",
(2016),
5 S.
-
M. Kaltenbacher, A. Hüppe, B. Wohlmuth:
"A Benchmark Case for Computational Acoustic including Rotating Domains";
Vortrag: DAGA 2016,
Aachen (eingeladen);
14.03.2016
- 17.03.2016; in: "42. Jahrestagung für Akustik",
(2016),
S. 217
- 220.
-
M. Kaltenbacher, B. Kaltenbacher:
"Waves 2015";
Vortrag: The 12th International Conference on Mathematical and Numerical Aspects of Wave Propagation,
Karlsruhe (eingeladen);
20.07.2015
- 24.07.2015; in: "The 12th International Conference on Mathematical and Numerical Aspects of Wave Propagation",
(2015),
S. 208
- 209.
-
M. Kaltenbacher, M. Nicolai, B. Kaltenbacher, A. Schönecker:
"Nonlinear piezoelectric model based on switching processes and its finite element fomulation";
Vortrag: 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012),
University of Vienna;
10.09.2012
- 14.09.2012; in: "CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), September 10-14, 2012, Vienna, Austria",
(2012),
12 S.
-
M. Kaltenbacher, I. Sim, A. Hüppe, B. Wohlmuth:
"Multi-Model approach for computational aeroacoustic";
Vortrag: DAGA 2012,
Darmstadt;
19.03.2012
- 22.03.2012; in: "38. Deutsche Jahrestagung für Akkustik",
(2012),
S. 279
- 280.
-
M. Kaltenbacher, A. Volk, M. Ertl:
"Anisotropic Model for the Numerical Computation of Magnetostriction in Steel Sheets";
Vortrag: The 15 International IGTE Symposium on Numerical Field Calculation in Electrical Engineering,
Graz;
17.09.2012
- 19.09.2012; in: "The 15 International IGTE Symposium on Numerical Field Calculation in Electrical Engineering",
Graz
(2012),
ISBN: 978-3-85125-258-3;
S. 181
- 185.
-
S. Karnouskos, R. Shina, P. Leitão, L. Ribeiro, T. Strasser:
"Assessing the Integration of Software Agents and Industrial Automation Systems with ISO/IEC 25010";
Vortrag: IEEE 16th International Conference on Industrial Informatics (INDIN),
Porto, Portugal;
18.07.2018
- 20.07.2018; in: "Proceedings of the IEEE 16th International Conference on Industrial Informatics (INDIN)",
IEEE,
(2018),
ISBN: 978-1-5386-4828-5;
6 S.
Zusätzliche Informationen
-
S. Karnouskos, R. Sinha, P. Leitão, L. Ribeiro, T. Strasser:
"The Applicability of ISO/IEC 25023 Measures to the Integration of Agents and Automation Systems";
Vortrag: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society,
Washington DC, USA;
21.10.2018
- 23.10.2018; in: "Proceedings of the IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society",
IEEE,
(2018),
ISBN: 978-1-5090-6683-4;
8 S.
Zusätzliche Informationen
-
H. Kerschner, M. Kozek:
"Identification of Combined Patient Pharmacokinetics and Pharmacodynamics Using Neural Networks";
Vortrag: 4th International EUROSIM 2001 Congress,
Delft, Netherlands;
26.06.2001
- 29.06.2001; in: "Proceedings of the 4th International Eurosim 2001 Congress",
(2001),
ISBN: 90-806441-1-0.
Zusätzliche Informationen
-
M. Killian, S. Grosswindhager, M. Kozek, B. Mayer:
"Pre-processing of Partition Data for Enhancement of LOLIMOT";
Vortrag: 8th EUROSIM Congress on Modelling and Simulation,
Cardiff, Wales;
10.09.2013
- 13.09.2013; in: "Proceedings of the 8th EUROSIM Congress on Modelling and Simulation 2013",
(2013),
ISBN: 978-0-7695-5073-2;
5 S.
Zusätzliche Informationen
-
M. Killian, M. Kozek:
"Adaptive model predictive control for energy-efficient smart homes using a dynamic Kalman filter-bank";
Vortrag: 15th International Conference on Control, Automation, Robotics and Vision (ICARCV 2018),
Singapore;
18.11.2018
- 21.11.2018; in: "Proceedings of 15th International Conference on Control, Automation, Robotics and Vision (ICARCV 2018)",
IEEE (Hrg.);
IEEE,
pp. 925-930
(2018),
Paper-Nr. TuCT7.1,
6 S.
Zusätzliche Informationen
-
M. Killian, M. Kozek:
"Cooperative Fuzzy model predictive control for a multivariate process";
Vortrag: 2016 IEEE World Congress on Computational Intelligence (Fuzz- IEEE),
Vancouver, Canada;
25.07.2016
- 29.07.2016; in: "Proceedings of IEEE World Congress on Computational Intelligence (Fuzz- IEEE) 2016",
(2016),
6 S.
Zusätzliche Informationen
-
M. Killian, M. Kozek:
"Optimal partitioning of a boiler-turbine unit for Fuzzy model predictive control";
Vortrag: 20th IFAC World Congress,
Toulouse, France;
09.07.2017
- 14.07.2017; in: "Proc. of 20th IFAC World Congress",
Proc. of 20th IFAC World Congress,
(2017),
Paper-Nr. 2587,
6 S.
Zusätzliche Informationen
-
M. Killian, M. Kozek:
"Short-term occupancy prediction and occupancy based constraints for MPC of smart homes";
Vortrag: 2019 IFAC Workshop on Control of Smart Grid and Renewable Energy Systems,
Jeju, Korea;
10.06.2019
- 12.06.2019; in: "2019 IFAC Workshop on Control of Smart Grid and Renewable Energy Systems",
(2019).
Zusätzliche Informationen
-
M. Killian, M. Kozek, A. Leitner, R. Goldgruber:
"IntelliEE-Home: Intelligent energy-efficient home automation system";
Vortrag: e-nova 2016 Internationaler Kongress: Nachhaltige Technologien: Gebäude - Energie - Umwelt,
Pinkafeld;
26.11.2015
- 27.11.2015; in: "Nachhaltige Gebäude: Versorgung - Speicherung - Optimierung",
Science.Research.Pannonia,
12
(2016),
ISBN: 978-37011-0372-0;
S. 237
- 243.
Zusätzliche Informationen
-
M. Killian, M. Kozek, A. Leitner, R. Goldgruber:
"Optimization of smart homes using mixed-integer quadratic-programming and occupancy predictions";
Vortrag: 8th International Symposium on Energy,
Aberdeen, Scotland, UK (eingeladen);
06.08.2018
- 09.08.2018; in: "Proceedings of 8th International Symposium on Energy",
North Sea Conference & Journal,
(2018),
1 S.
Zusätzliche Informationen
-
M. Killian, M. Kozek, B. Mayer, M. Mayer:
"Eine flexible Methodik für die modellbasierte prädiktive Regelung komplexer Gebäude";
Vortrag: enova 2015 Internationaler Knogress: Nachhaltige Gebäude,
Pinkafeld (eingeladen);
26.11.2015
- 27.11.2015; in: "Nachhaltige Gebäude",
FH Burgenland GmbH,
19
(2015),
ISBN: 978-3-7011-0350-8;
S. 405
- 420.
Zusätzliche Informationen
-
M. Killian, A. Leitner, R. Goldgruber, M. Kozek:
"Adaptive model predictive control for energy-efficient smart homes";
Vortrag: 7th International Symposium on Energy,
Manchester, UK (eingeladen);
13.08.2017
- 17.08.2017; in: "Proceedings of 7th International Symposium on Energy",
(2017).
Zusätzliche Informationen
-
M. Killian, A. Leitner, R. Goldgruber, M. Kozek:
"Short-term forecasts for optimal model predictive control in smart homes";
Vortrag: e-nova 2017: Zukunft der Gebäude: digital - dezentral - ökologisch,
Pinkafeld, Burgenland;
23.11.2017
- 24.11.2017; in: "Zukunft der Gebäude: digital - dezentral - ökologisch",
Science Research Pannonia / Leykam Verlag,
21
(2017),
ISBN: 978-3-7011-0399-7;
S. 61
- 68.
Zusätzliche Informationen
-
M. Killian, B. Mayer, M. Kozek:
"Hierachical Fuzzy MPC Concept for Building Heating Control";
Vortrag: 19th IFAC World Congress,
Cape Town, South Africa;
24.08.2014
- 29.08.2014; in: "Proceedings of the 19th IFAC World Congress, 2014",
The International Federation of Automatic Control,
19th IFAC World Congress
(2014),
Paper-Nr. 0772,
8 S.
Zusätzliche Informationen
-
F. Kitanoski, W. Puntigam, M. Kozek, J. Hager:
"An Engine Heat Transfer Model for Comprehensive Thermal Simulations";
Vortrag: 2006 SAE World Congress,
Detroit, Michigan, USA;
03.04.2006
- 06.04.2006; in: "Combustion and Flow Diagnostics and Fundamental Advances in Thermal Fluid Sciences",
SAE International,
SP-2015/2006-01-0882
(2006),
ISBN: 0-7680-1636-3.
Zusätzliche Informationen
-
F. Klinger, J. Edelmann, S. Jeindl, M. Plöchl:
"Equivalent suspension parameters of active suspension systems";
Vortrag: 14th International Symposium on Advanced Vehicle Control (AVEC'18),
Peking;
16.07.2018
- 20.07.2018; in: "Proceedings of AVEC'18",
(2018),
6 S.
-
F. Klinger, J. Edelmann, M. Plöchl:
"Characterization and potential analysis of passive and (semi-)active suspension systems by means of equivalent suspension parameters";
Vortrag: chassis.tech plus,
München;
25.06.2019
- 26.06.2019; in: "10th International Munich Chassis Symposium 2019",
Springer Vieweg,
(2019),
ISBN: 978-3-658-26435-2;
S. 389
- 403.
-
F. Klinger, J. Edelmann, M. Plöchl, S. Jeindl, B. Angrosch:
"Virtual chassis tuning with emphasis on the damper characteristics";
Vortrag: chassis.tech plus,
München;
16.06.2015
- 17.06.2015; in: "6th International Munich Chassis Symposium 2015",
P. E. Pfeffer (Hrg.);
Springer Vieweg,
(2015),
ISBN: 978-3-658-09710-3;
S. 325
- 346.
-
F. Klinger, J. Nusime, J. Edelmann, G. Magnani, M. Plöchl:
"Wobble of a bicycle with rider hands-on and hands-off";
Vortrag: 23rd International Symposium on Dynamics of Vehicles on Roads and Tracks,
Qingdao;
19.08.2013
- 23.08.2013; in: "23rd International Symposium on Dynamics of Vehicles on Roads and Tracks",
(2013),
7 S.
-
M. Kneissl, C. Hametner, M. Dohr:
"Nonlinear battery modeling using continuous-time system identification methods and non-uniformly sampled data";
Vortrag: 22nd International Conference on System Theory, Control and Computing,
Sinaia;
10.10.2018
- 12.10.2018; in: "Proceedings of the 22nd International Conference on System Theory, Control and Computing",
(2018),
S. 627
- 633.
-
T. Kniffka, H. Ecker, B. Mace, R. Halkyard:
"Numerical investigation of parametrically excited non-linear multi degree of freedom micro-electromechanical systems";
Vortrag: DETC2016 - ASME 2016 Int. Design Engineering Technical Conferences & Computers and Information in Engineering Conference,
Charlotte, North Carolina, USA;
21.08.2016
- 24.08.2016; in: "Proceedings of DETC2016",
.. ASME (Hrg.);
(2016),
Paper-Nr. DETC2016-60349,
9 S.
-
T. Kniffka, B. Mace, H. Ecker, R. Halkyard:
"Studies of parametrically excited non-linear MDOF systems at parametric resonances";
Vortrag: MoViC / RASD 2016 - 13th Int. Conf. on Motion and Vibration Control - 12th Int. Conf. on Recent Advances in Structural Dynamics,
Southampton,UK;
03.07.2016
- 06.07.2016; in: "Proc. of MoViC/RASD 2016",
(2016),
11 S.
-
T. Kniffka, J. Welte, H. Ecker:
"Stability Analysis of a Time-periodic 2-dof MEMS Structure";
Vortrag: 9th International Conference on Mathematical Problems in Engineering, Aerospace and Sciences,
Wien;
10.07.2012
- 14.07.2012; in: "American Institute of Physics Conference Proceedings",
(2012),
8 S.
Zusätzliche Informationen
-
O. König, S. Jakubek, G. Prochart:
"Battery Impedance Emulation for Hybrid and Electric Powertrain Testing";
Vortrag: 2012 IEEE Vehicle Power and Propulsion Conference,
Seoul, Korea;
09.10.2012
- 12.10.2012; in: "2012 IEEE Vehicle Power and Propulsion Conference, Oct. 9-12, 2012, Seoul, Korea",
(2012),
S. 627
- 632.
Zusätzliche Informationen
-
O. König, S. Jakubek, G. Prochart:
"Einschleifige Impedanzregelung für die Emulation von Traktionsbatterien auf Antriebsprüfständen";
Vortrag: 18. Steirisches Seminar über Regelungstechnik und Prozessautomatisierung,
Schloss Retzhof, Leibnitz, Österreich;
02.09.2013
- 05.09.2013; in: "SSRP 2013: 18. Steirisches Seminar über Regelungstechnik und Prozessautomatisierung",
(2013),
ISBN: 978-3-901439-09-4;
S. 29
- 44.
Zusätzliche Informationen
-
O. König, S. Jakubek, G. Prochart:
"Model Predictive Control of a Battery Emulator for Testing of Hybrid and Electric Powertrains";
Vortrag: Vehicle Power and Propulsion Conference (VPPC), 2011 IEEE,
Chicago;
06.09.2011
- 09.09.2011; in: "Vehicle Power and Propulsion Conference (VPPC), 2011 IEEE",
(2011),
ISBN: 978-1-61284-248-6;
6 S.
Zusätzliche Informationen
-
O. König, S. Jakubek, G. Prochart:
"Modellprädiktive Regelung eines Batterieemulators";
Vortrag: EMA Nürnberg 2012,
Nürnberg, Deutschland;
21.09.2012
- 22.09.2012; in: "EMA Nürnberg 2012",
(2012),
8 S.
Zusätzliche Informationen
-
A. Körner, H. Ecker, F. Breitenecker:
"Anforderungen an State Event Charakterisierung für die Simulation Hybrider Modelle";
Vortrag: ASIM-Workshop der STS/GMMS 2014,
Robert Bosch Zentrum für Leistungselektronik, Reutlingen-Rommelsbach;
20.02.2014
- 21.02.2014; in: "ASIM-Workshop der STS/GMMS 2014",
J. Scheible, I. Bausch-Gall, C. Deatcu (Hrg.);
ARGESIM Verlag Wien,
1/1/Wien
(2014),
ISBN: 978-3-901608-43-8;
Paper-Nr. 4,
2 S.
Zusätzliche Informationen
-
A. Körner, B. Heinzl, M. Rößler, G. Zauner, F. Breitenecker, H. Ecker:
"Comparison of Hybrid Modelling Approaches: ARGESIM-Comparison BCP - Bouncing Ball, Circuit with Diodes, Rotating Pendulum";
Vortrag: ASIM 2011,
Winterthur, Schweiz;
07.09.2011
- 09.09.2011; in: "Tagungsband Abstracts und Fullpapers",
ZHAW School of Engineering,
(2011),
ISBN: 978-3-905745-44-3.
Zusätzliche Informationen
-
A. Körner, B. Heinzl, M. Rößler, G. Zauner, H. Ecker, F. Breitenecker:
"Comparison of Hybrid Modelling Approaches: ARGESIM-Comparison BCP - Bouncing Ball, Circuit with Diodes, Rotating Pendulum";
Poster: ASIM 2011,
Winterthur, Schweiz;
07.09.2011
- 09.09.2011; in: "ASIM 2011 21. Symposium Simulationstechnik",
ZHAW School of Engineering,
(2011),
ISBN: 978-3-905745-44-3.
-
B. Kopacek, P. Kopacek:
"Sustainable Development and End Of Life Management For Developping Countries";
Vortrag: 3rd IFAC Workshop DECOM-TT 2003,
Istanbul, Turkey;
26.06.2003
- 28.06.2003; in: "Preprints the 3rd IFAC Workshop DECOM-TT 2003 - Automatic Systems For Building the Infrastructure in Developing Countries",
Published for the International Federation of Automatic Control by Turkish National Automatic Control Committee,
Istanbul, Turkey
(2003),
S. 83
- 87.
-
B. Kopacek, P. Kopacek:
"Trends in Semi Automatised Assembly and Disassembly";
Vortrag: Fira Robot World Congress 2003,
Messe Congress Center, Wien, Österreich;
01.10.2003
- 03.10.2003; in: "Proceedings of the 2nd Fira Robot Soccer World Congress Volume 2 ",
Messe Congress Center, Wien, Österreich
(2003),
ISBN: 3-902161-01-9;
S. 25
- 31.
-
P. Kopacek:
"A "Tool Kit" for Demining Robots";
Vortrag: RAAD - 11th International Workshop on Robotics in Alpe-Adria-Danube Region,
Balatonfüred, Hungary;
30.06.2002
- 02.07.2002; in: "RAAD - 11th International Workshop on Robotics in Alpe-Adria-Danube Region",
(2002),
S. 131
- 136.
-
P. Kopacek:
"A "Tool Kit" for Demining Robots";
Vortrag: Robots for Humanitarian Demining,
Vienna, Austria;
03.11.2002
- 05.11.2002; in: "IARP Workshop on Robots for Humanitarian Demining HUDEM '02",
(2002).
-
P. Kopacek:
"A Mechatronics Management Laboratory";
Vortrag: IFAC Conference on Supplemental Ways for Improving International Stability through Automation ISA'06,
Prishtina, Kosovo;
15.06.2006
- 17.06.2006; in: "Improving Stability in Developing Nations Through Automation 2006 - A Proceedings Volume from the IFAC Conference on Supplemental Ways for Improving International Stability through Automation ISA'06",
(2006),
ISBN: 9780080454061;
S. 37
- 41.
-
P. Kopacek:
"Advances in Robotics";
Vortrag: Eurocast 2005, 10th International Workshop on Computer Aided Systems Theory,
Las Palmas de Gran Canaria, Spain;
07.02.2005
- 11.02.2005; in: "Eurocast 2005 Cast and Tools for Robotics, Vehicular and Communication Systems",
(2005),
ISBN: 84-689-0432-5;
S. 272
- 274.
-
P. Kopacek:
"Cost Oriented Humanoid Robots";
Vortrag: 13th International EUROCAST Conference,
Las Palamas de Gran Canaria, Spain;
06.02.2011
- 11.02.2011; in: "Computer Aided Systems Theory - EUROCAST 2011",
R. Moreno-Díaz, F. Pichler, A. Quesada-Arencibia (Hrg.);
Springer,
Revised Selected Papers, Part I
(2011),
ISBN: 978-3-642-27548-7;
S. 18
- 24.
Zusätzliche Informationen
-
P. Kopacek:
"Cost Oriented Humanoid Robots";
Vortrag: 18th IFAC World Congress,
Milan;
28.08.2011
- 02.09.2011; in: "Proceedings of the 18th IFAC World Congress",
18th IFAC World Congress / Volume# 18 / Part# 1
(2011),
ISBN: 978-3-902661-93-7;
S. 12680
- 12685.
-
P. Kopacek:
"Demining Robots: A Tool for International Stability";
Vortrag: 15th IFAC World Congress,
Barcelona, Spain;
21.07.2002
- 27.07.2002; in: "15th IFAC World Congress",
(2002).
-
P. Kopacek:
"Education for Automation in Developing Countries";
Vortrag: 4th IFAC Workshop DECOM-TT 2004,
Bansko, Bulgaria;
03.10.2004
- 05.10.2004; in: "Preprints of the International IFAC Workshop DECOM-TT 2004, Automatic Systems for Building the Infrastructure in Developing Countries, Regional and Global Aspects",
(2004),
ISBN: 954-9641-41-4;
S. 1
- 5.
-
P. Kopacek:
"Education for new Automation Technologies";
Vortrag: IFAC Multitrack Conference on Advanced Control Strategies for Social and Economic Systems ACS'04,
Vienna University of Technology,Vienna, Austria;
02.09.2004
- 04.09.2004; in: "IFAC Multitrack Conference on Advanced Control Strategies for Social and Economic Systems ACS'04 - FINAL PROGRAM & ABSTRACT BOOK",
(2004),
ISBN: 3-902161-03-5.
-
P. Kopacek:
"Education in "Mechatronics Management"";
Vortrag: International Conference on Higher Education in Iraq,
Kurdistan Region-Erbil, Irak;
11.12.2007
- 13.12.2007; in: "For the Advancement of Higher Education in Iraq",
(2007),
S. 172
- 180.
-
P. Kopacek:
"Education in Engineering Management";
Vortrag: Memorias of the Primeras Jornadas Internacionales de Mantenimiento y Mejoramiento Empresarial,
Quito, Ecuador;
08.03.2006
- 10.03.2006; in: "Memorias of the Primeras Jornadas Internacionales de Mantenimiento y Mejoramiento Empresarial",
(2006).
-
P. Kopacek:
"High technology in low cost manufacturing - with special emphasis on SME's";
Vortrag: 7th IFAC Symposium on Cost Oriented Automation "COA 2004",
Gatineau, Quebec, Canada;
06.06.2004
- 09.06.2004; in: "Preprints of the 7th IFAC Symposium on Cost Oriented Automation "COA 2004"",
(2004),
S. 25
- 32.
-
P. Kopacek:
"Higher Technical Education in Austria";
Vortrag: 17th EAEEIE Annual Conference on Innovation in Education for Electrical and Information Engineering,
Craiova, Romania;
01.06.2006
- 03.06.2006; in: "Proceedings of the 17th EAEEIE Annual Conference on Innovation in Education for Electrical and Information Engineering",
(2006),
ISBN: 978-973-742-350-4;
S. 69
- 73.
-
P. Kopacek:
"Humanoid Robots for Demining - Vision or Reality";
Vortrag: Second On-Site IARP Workshop on HUMANITARIAN DEMINING,
Prishtina, Kosovo;
19.06.2003
- 20.06.2003; in: "Second On-Site IARP Workshop on HUMANITARIAN DEMINING",
(2003),
S. 55
- 56.
-
P. Kopacek:
"Industrial and Commercial Applications of Mobile Mini-Robots";
Vortrag: COA 07,
La Habana, Kuba;
13.02.2007
- 15.02.2007; in: "Proceedings of the 8th IFAC Symposium on Cost Oriented Automation - COA 07",
(2007),
9 S.
-
P. Kopacek:
"Mechatronics Education in Developing Countries the Example: " Mechatronics Management" in Kosovo";
Vortrag: DECOM-TT 2007,
Cesme-Izmir, Türkei;
17.05.2007
- 20.05.2007; in: "Proceeding Volume of the 5th IFAC Workshop DECOM-TT 2007",
(2007),
ISBN: 978-975-01864-1-7;
S. 335
- 340.
-
P. Kopacek:
"New Robot Applications";
Vortrag: ERK 2005, Slovenian Section IEEE,
Portoroz, Slovenija;
26.09.2005
- 28.09.2005; in: "ERK 2005",
(2005),
ISSN: 1581-4572;
S. 27
- 30.
-
P. Kopacek:
"Optimized PWB Design for Re-Use";
Vortrag: CARE INNOVATION 2002,
Vienna, Austria;
25.11.2002
- 28.11.2002; in: "Conference Proceedings of Going Green CARE INNOVATION 2002",
(2002).
-
P. Kopacek:
"Playing with Automation (Robots for Entertainment, Leisure and Hobby)";
Vortrag: FIRA Robot World Congress,
Seoul, Korea;
26.05.2002
- 29.05.2002; in: "FIRA Robot World Congress 2002",
Korea Robot Soccer Association (KRSA),
Seoul, Korea
(2002),
S. 115
- 120.
-
P. Kopacek:
"Playing with Robots";
Vortrag: RAAD - 11th International Workshop on Robotics in Alpe-Adria-Danube Region,
Balatonfüred, Hungary;
30.06.2002
- 02.07.2002; in: "RAAD - 11th International Workshop on Robotics in Alpe-Adria-Danube Region",
(2002),
S. 11
- 18.
-
P. Kopacek:
"Playing with Robots - Robots for Entertainment, Leisure and Hobby - Robotsoccer";
Vortrag: eAROB,
TU Wien, Wien, Österreich;
13.07.2007
- 14.07.2007; in: "Proceedings of the First European Workshop on Artificial Life and Robots - eAROB",
(2007),
S. 13
- 19.
-
P. Kopacek:
"Robot Applications";
Vortrag: Seventh National Conference with International Participation ETAI'2005,
Ohrid, Republic of Macedonia;
21.09.2005
- 24.09.2005; in: "Seventh National Conference with International Participation ETAI'2005",
(2005),
S. 1
- 4.
-
P. Kopacek:
"Robot Swarms for Demining - Vision or Reality";
Vortrag: Robots for Humanitarian Demining,
Vienna, Austria;
03.11.2002
- 05.11.2002; in: "IARP Workshop on Robots for Humanitarian Demining HUDEM '02",
P. Kopacek (Hrg.);
Institut für Handhabungsgeräte und Robotertechnik,
Wien
(2002).
-
P. Kopacek:
"Robotics in Austria";
Vortrag: Fira Robot World Congress 2003,
Messe Congress Center, Wien, Österreich;
01.10.2003
- 03.10.2003; in: "Proceedings of the 2nd Fira Soccer Robot World Congress Volume 2",
Messe Congress Center, Wien, Österreich
(2003),
ISBN: 3-902161-01-9;
S. 13
- 18.
-
P. Kopacek:
"Robotics in Austria";
Vortrag: 2004 Korea-Austria Joint Seminar on Intelligent Robotics (während 2004 FIRA Robot World Congress),
Bexco, Busan, Korea;
28.10.2004; in: "2004 Korea-Austria Joint Seminar on Intelligent Robotics",
(2004),
S. 8
- 17.
-
P. Kopacek:
"Robotics in Austria";
Vortrag: Eighteenth International Conference "Robotics and Mechatronics" '08,
Varna, Bulgaria;
17.09.2008
- 21.09.2008; in: "Proceedings of the Eighteenth International Conference "Robotics and Mechatronics" '08",
(2008),
S. 190
- 192.
-
P. Kopacek:
"Robots for Humanitarian Demining";
Vortrag: ISR 2002 - International Symposium on Robotics,
Stockholm, Sweden;
07.10.2002
- 11.10.2002; in: "Proceedings of the 33rd International Symposium on Robotics",
(2002),
S. 13
- 17.
-
P. Kopacek:
"Robotsoccer: past - present - future";
Vortrag: 37th International Symposium on Robotics ISR 2006 and 4th German Conference on Robotics ROBOTIK 2006,
Munich, Germany;
15.05.2006
- 17.05.2006; in: "Proceedings of the 37th International Symposium on Robotics ISR 2006 and 4th German Conference on Robotics ROBOTIK 2006",
(2006),
ISBN: 3-18-091956-6;
S. 153.
-
P. Kopacek:
"Robotsoccer: Past - Present - Future";
Poster: Ciras 2008,
Linz;
19.06.2008
- 21.06.2008; in: "Reprint-Proceedings CIRAS 2008, 5th International Conference on Computational Intelligence, Robotics and Autonomous Systems",
(2008),
5 S.
-
P. Kopacek:
"Semiautomatized Disassembly - Some Examples";
Vortrag: Memorias of the Primeras Jornadas Internacionales de Mantenimiento y Mejoramiento Empresarial,
Quito, Ecuador;
08.03.2006
- 10.03.2006; in: "Memorias of the Primeras Jornadas Internacionales de Mantenimiento y Mejoramiento Empresarial",
(2006).
-
P. Kopacek, M. Ceccarelli, E. Hajrizi, L. Stapleton:
"Mechatronics Education and International Stability - The Development of University-level Education Programmes in Advanced Engineering in Kosovo";
Vortrag: IFAC Conference on Supplemental Ways for Improving International Stability through Automation ISA'06,
Prishtina, Kosovo;
15.06.2006
- 17.06.2006; in: "Improving Stability in Developing Nations Through Automation 2006 - A Proceedings Volume from the IFAC Conference on Supplemental Ways for Improving International Stability through Automation ISA'06",
(2006),
ISBN: 9780080454061;
S. 1
- 7.
-
P. Kopacek et al.:
"A Modular Control Concept for Disassembly Cells";
Vortrag: CARE INNOVATION 2002,
Vienna, Austria;
25.11.2002
- 28.11.2002; in: "Conference Proceedings of Going Green CARE INNOVATION 2002",
(2002).
-
P. Kopacek et al.:
"A Robotized Disassembly Cell for Printed Circuit Boards";
Vortrag: ISR 2002 - International Symposium on Robotics,
Stockholm, Sweden;
07.10.2002
- 11.10.2002; in: "Proceedings of the 33rd International Symposium on Robotics",
(2002),
S. 641
- 643.
-
P. Kopacek et al.:
"Examples for Intelligent Disassembly Systems";
Vortrag: CARE INNOVATION 2002,
Vienna, Austria;
25.11.2002
- 28.11.2002; in: "Conference Proceedings of Going Green CARE INNOVATION 2002",
(2002).
-
P. Kopacek et al.:
"Reverse Logistics in Practise";
Vortrag: CARE INNOVATION 2002,
Vienna, Austria;
25.11.2002
- 28.11.2002; in: "Conference Proceedings of Going Green CARE INNOVATION 2002",
(2002).
-
P. Kopacek et al.:
"State of the Art and Future Trends in Intelligent Disassembly";
Vortrag: CARE INNOVATION 2002,
Vienna, Austria;
25.11.2002
- 28.11.2002; in: "Conference Proceedings of Going Green CARE INNOVATION 2002",
(2002).
-
P. Kopacek et al.:
"The Role and the Results of CEEPUS Projects in the Education of Applied Robotics";
Vortrag: 14th International Workshop on Robotics in Alpe-Adria-Danube Region RAAD´05,
Bucharest, Romania;
26.05.2005
- 28.05.2005; in: "Proceedings of the 14th International Workshop on Robotics in Alpe-Adria-Danube Region RAAD´05",
(2005),
ISBN: 973-718-241-3;
S. 229
- 234.
-
P. Kopacek et al.:
"The Virtual University for Sustainability - Worldwide Information and Cooperation on Key Sustainable Issues";
Vortrag: CARE INNOVATION 2002,
Vienna, Austria;
25.11.2002
- 28.11.2002; in: "Conference Proceedings of Going Green CARE INNOVATION 2002",
(2002).
-
P. Kopacek et al.:
"Using IT Trade-in Trials to Improve Collection Processes";
Vortrag: CARE INNOVATION 2002,
Vienna, Austria;
25.11.2002
- 28.11.2002; in: "Conference Proceedings of Going Green CARE INNOVATION 2002",
(2002).
-
P. Kopacek, M. Han:
"Mini Robots for Soccer";
Vortrag: EUROCAST 2007,
Las Palmas, Spanien;
12.02.2007
- 16.02.2007; in: "Computer Aided Systems Theory of EUROCAST 2007",
(2007),
ISBN: 978-84-690-3603-7;
S. 342
- 344.
-
P. Kopacek, M. Han:
"Robots for Entertainment, Leisure and Hobby";
Vortrag: CLAWAR / EURON / IARP Workshop on Robots in Entertainment, Leisure and Hobby - ELH'04,
Vienna University of Technology, Vienna, Austria;
02.12.2004
- 04.12.2004; in: "CLAWAR / EURON / IARP Workshop on Robots in Entertainment, Leisure and Hobby - ELH'04 Proceedings",
Institut für Mechanik und Mechatronik / Abt. 6 Intelligente Handhabungs- und Robotertechnik,
TU Wien, Wien, Österreich
(2004),
ISBN: 3-902161-04-3.
-
P. Kopacek, M. Han, B. Putz, E. Schierer, M. Würzl:
"A concept for a humanoid demining robot";
Vortrag: International IARP Workshop on Robotics and Mechanical assistance in Humanitarian Demining and similar risky interventions,
Brussels-Leuven, Belgium;
16.06.2004
- 18.06.2004; in: "Proceedings of the International IARP Workshop on Robotics and Mechanical assistance in Humanitarian Demining and similar risky interventions",
(2004),
5 S.
-
P. Kopacek, M. Han, B. Putz, E. Schierer, M. Würzl:
"Abstract - a concept of a hightech mobile minirobot for outer space";
Vortrag: International Conference on Solar Power from Space SPS'04 together with the International Conference on Wireless Power Transmission WPT5,
Granada, Spain;
30.06.2004
- 02.07.2004; in: "ESA SP-567 Abstracts of the International Conference on Solar Power from Space SPS'04 together with the International Conference on Wireless Power Transmission WPT5",
(2004),
S. 132
- 133.
-
P. Kopacek, M. Han, B. Putz, E. Schierer, M. Würzl:
"An industrial image processing system for fast moving objects";
Vortrag: FIRA RoboWorld Congress Singapore 2005 FIRA 2005,
Ochard Hotel, Singapore;
14.12.2005
- 16.12.2005; in: "FIRA RoboWorld Congress Singapore 2005 FIRA 2005",
(2005),
ISBN: 981-05-4674-2;
S. 1
- 5.
-
P. Kopacek, M. Han, B. Putz, E. Schierer, M. Würzl:
"Mobile Mini Robots for Robotsoccer";
Vortrag: Synergies between Information Processing and Automation, 49. Internationales Wissenschaftliches Kolloquiums,
TU Ilmenau, Germany;
27.09.2004
- 30.09.2004; in: "Synergies between Information Processing and Automation, Proceedings des 49. Internationalen Wissenschaftlichen Kolloquiums",
Shaker Verlag,
Vol.1
(2004),
ISBN: 3-8322-2824-1;
S. 169
- 174.
-
P. Kopacek, M. Han, B. Putz, E. Schierer, M. Würzl:
"Narosot - Nanotechnology in Robot soccer";
Vortrag: Conference on Information Systems, Control and Interoperability - INCOM 2006,
Saint-Etienne, France;
17.05.2006
- 19.05.2006; in: "Preprints of the Conference on Information Systems, Control and Interoperability - INCOM 2006",
(2006),
S. 193
- 198.
-
P. Kopacek, M. Han, B. Putz, E. Schierer, M. Würzl:
"New Concepts for humanoid robots";
Vortrag: RAAD - 13th International Workshop on Robotics in Alpe-Adria-Danube Region,
Brno University of Technology, Czech Republic;
01.06.2004
- 06.06.2004; in: "Proceedings of RAAD'04",
(2004),
S. 218
- 221.
-
P. Kopacek, B. Kopacek:
"End of Life Management of Automation Devices";
Vortrag: COA 07,
La Habana, Kuba;
13.02.2007
- 15.02.2007; in: "Proceedings of the 8th IFAC Symposium on Cost Oriented Automation - COA 07",
(2007),
5 S.
-
P. Kopacek, B. Kopacek:
"End of Life Management of Automation Devices";
Vortrag: IFAC Workshop on Intelligent Assembly and Disassembly IAD'07 and IFAC Workshop on Intelligent Manufacturing Systems IMS'07,
Alicante, Spanien;
23.05.2007
- 26.05.2007; in: "Abstract of IFAC Workshop on Intelligent Assembly and Disassembly IAD'07 and IFAC Workshop on Intelligent Manufacturing Systems IMS'07",
(2007),
S. 34
- 35.
-
P. Kopacek, B. Kopacek:
"End of Life Management of Automation Devices";
Vortrag: Eighteenth International Conference "Robotics and Mechatronics" '08,
Varna, Bulgaria;
17.09.2008
- 21.09.2008; in: "Proceedings of the Eighteenth International Conference "Robotics and Mechatronics" '08",
(2008),
S. 216
- 219.
-
P. Kopacek, B. Kopacek:
"End of Life Management of Industrial Robots";
Vortrag: 16th Int. Workshop on Robotics in Alpe-Adria-Danube Region - RAAD 2007,
Ljubljana, Slowenien;
07.06.2007
- 09.06.2007; in: "Proceedings of the 16th Int. Workshop on Robotics in Alpe-Adria-Danube Region - RAAD 2007",
(2007),
ISBN: 978-961-243-067-2.
-
P. Kopacek, B. Kopacek:
"End of Life Management of Industrial Robots";
Vortrag: Going Green CARE Innovation 2010,
Schoenbrunn Palace Conference Centre, Vienna (Austria);
08.11.2010
- 11.11.2010; in: "Conference Proceedings of the Going Green CARE Innovation 2010",
(2010).
-
P. Kopacek, B. Kopacek:
"Intelligent Assembly and Disassembly - Past, Present and Future";
Vortrag: IFAC Workshop on Intelligent Assembly and Disassembly IAD'07 and IFAC Workshop on Intelligent Manufacturing Systems IMS'07,
Alicante, Spanien;
23.05.2007
- 26.05.2007; in: "Abstract of IFAC Workshop on Intelligent Assembly and Disassembly IAD'07 and IFAC Workshop on Intelligent Manufacturing Systems IMS'07",
(2007),
S. 23
- 24.
-
P. Kopacek, B. Kopacek:
"Robotized Disassembly of Mobile Phones";
Vortrag: IFAC International Workshop on Intelligent Assembly and Disassembly,
Bucharest, Romania;
09.10.2003
- 11.10.2003; in: "IFAC International Workshop on Intelligent Assembly and Disassembly",
Bucharest, Romania
(2003),
S. 142
- 144.
-
P. Kopacek, B. Kopacek:
"Semiautomatised disassembly of flat screens";
Vortrag: IFAC Workshop on Intelligent Assembly and Disassembly IAD'07 and IFAC Workshop on Intelligent Manufacturing Systems IMS'07,
Alicante, Spanien;
23.05.2007
- 26.05.2007; in: "Abstract of IFAC Workshop on Intelligent Assembly and Disassembly IAD'07 and IFAC Workshop on Intelligent Manufacturing Systems IMS'07",
(2007),
S. 122
- 125.
-
P. Kopacek, B. Kopacek, M. Ceccarelli, E. Hajrizi, L. Stapleton:
"Mechatronics Management a BSC Program";
Poster: IEMC-Europe 2008,
Estoril, Portugal;
28.06.2008
- 30.06.2008; in: "IEMC-Europe 2008 International Engineering Management Conference, Managing Engineering, Technology and Innovation for Growth",
(2008),
ISBN: 978-1-4244-2288-3;
S. 557
- 561.
-
P. Kopacek, B. Kopacek, R. Knoth:
"Examples for Intelligent Disassembly Systems";
Vortrag: 3rd International conference EIaM 05´ Environmental Engineering and Management,
Kosice, Slovac Republic;
26.05.2005
- 27.05.2005; in: "Acta Mechanica Slovaca",
(2005),
ISSN: 1335-2393;
S. 19
- 26.
-
P. Kopacek, B. Kopacek, S. Steiner:
"ReLCD Recycling and Re-Use LCD Panels";
Vortrag: VARIREI 2007,
L'Aquila, Italien;
27.06.2007
- 29.06.2007; in: "Proceedings of VARIREI 2007, 6th International Congress Valorisation and Recycling of Industrial Waste",
(2007).
-
P. Kopacek, M. Macko, J. Filizikowski:
"The Semi-Intelligent Cells for Recycling in the Context of LCA";
Vortrag: Wrzesien 2007,
Bydgoszcz-Biale Blota, Polen;
2007; in: "Proceedings of Tworczose Inzynierska dla Wspolczesnej Europy Wrzesien 2007",
(2007),
S. 56
- 61.
-
P. Kopacek, M. Moritz, A. Stepan:
"Skill Based Automatic Production, technical, management and economical aspects";
Vortrag: IFAC/IFIP/IMACS Symposion On Skill Based Automated Production,
Wien (eingeladen);
15.11.1989
- 17.11.1989; in: "Skill Based Automated Production",
P. Kopacek, R. Genser, M. Moritz (Hrg.);
Pergamon Press,
(1990),
10 S.
-
P. Kopacek, D. Noe:
"Robots for Assembly and Disassembly";
Vortrag: RAAD - 11th International Workshop on Robotics in Alpe-Adria-Danube Region,
Balatonfüred, Hungary;
30.06.2002
- 02.07.2002; in: "RAAD - 11th International Workshop on Robotics in Alpe-Adria-Danube Region",
(2002),
S. 455
- 460.
-
P. Kopacek, L. Silberbauer:
"A new Locomotion Concept for Humanitarian Demining Robots";
Vortrag: The 7th International WS HUDEM'2008,
Cairo;
28.03.2008
- 30.03.2008; in: "Proceedings of the 7th IARP International WS HUDEM'2008",
(2008),
S. 32
- 36.
-
J. Kopriva, J. Kunovky, M. Drozdova, V. Satek, M. Killian:
"Parallel system based on the RNS";
Vortrag: 12th Conference Informatics'2013,
Spisská Nová Ves, Slovakia;
05.11.2013
- 07.11.2013; in: "The Proceedings of the 12th Conference Informatics'2013",
(2013),
ISBN: 978-80-8143-127-2;
S. 323
- 328.
Zusätzliche Informationen
-
M. Kozek:
"Input-Output Synchronization with Non-Uniformly and Asynchronously Sampled Output Data";
Vortrag: 38th IEEE Conference on Decision and Control 1999,
Phoenix, Arizona, USA;
07.12.1999
- 10.12.1999; in: "Conference Proceedings of the 38th IEEE Conference on Decision and Control",
(1999),
ISBN: 0-7803-5253-x;
6 S.
-
M. Kozek:
"Modeling for Control Design -- Challenges and Pitfalls in a Demanding Task";
Hauptvortrag: CSSim2011, 2nd International Conference on Computer Modelling and Simulation,
Brno, Czech Republic (eingeladen);
05.09.2011
- 07.09.2011; in: "Proceedings of the 2nd International Conference on Computer Modelling and Simulation-CSSim2011",
(2011),
ISBN: 9788021443204;
47 S.
Zusätzliche Informationen
-
M. Kozek, C. Benatzky, A. Schirrer, A. Stribersky:
"Aktive Schwingungsdämpfung an einer elastischen Wagenkasten Struktur";
Vortrag: GAMM-GMA-Workshop,
Salzburg (eingeladen);
21.09.2008
- 26.09.2008; in: "Proceedings GMA Workshops FA 1.30 and 1.40 in Salzburg/Anif 2008",
(2008),
24 S.
-
M. Kozek, C. Benatzky, A. Schirrer, A. Stribersky:
"Vibration Damping of a Flexible Car Body Structure Using Piezo-Stack Actuators";
Vortrag: 17th IFAC World Congress,
Seoul, Korea (eingeladen);
06.07.2008
- 11.07.2008; in: "Proceedings of the 17th IFAC World Congress",
(2008),
6 S.
Zusätzliche Informationen
-
M. Kozek, G Görtler, H. Jörgl:
"MRACLab - A Tool for Teaching Model Reference Adaptive Control";
Vortrag: 14th IFAC World Congress 1999,
Beijing, P.R. China;
05.07.1999
- 09.07.1999; in: "Proceedings 14th IFAC World Congress 1999",
(1999),
ISBN: 0-08-0432484;
6 S.
-
M. Kozek, C. Hametner:
"Block-oriented identification of Hammerstein/Wiener-models using the RLS-algorithm";
Vortrag: Proceedings of the 12th ISEM,
Bad Gastein;
12.09.2005
- 14.09.2005; in: "Proceedings of the 12th ISEM",
(2005),
ISBN: 3-902105-01-1;
S. 326
- 327.
Zusätzliche Informationen
-
M. Kozek, S. Helm, C. Hametner:
"A Novel Criterion for Optimal Identification of Wiener Models Using Local Linear Models";
Vortrag: 12th World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI 2008,
Orlando, Florida, USA;
29.06.2008
- 02.07.2008; in: "Prodeedings of the WMSCI 2008",
(2008),
ISBN: 978-1-934272-49-7;
Paper-Nr. S759TQ,
6 S.
Zusätzliche Informationen
-
M. Kozek, F. Höftberger, M. Gusenbauer:
"Active Damping of a Quadratic Plate for a Non-Collocated Disturbance";
Vortrag: ICSV13 - Thirteenth International Congress on Sound and Vibration,
Wien;
02.07.2006
- 06.07.2006; in: "CD-ROM Proceedings of the Thirtheenth International Congress on Sound and Vibration (ICSV13)",
(2006),
8 S.
Zusätzliche Informationen
-
M. Kozek, R. Hofstädter:
"Model predictive control for HVAC in light rail and metro vehicles";
Vortrag: Urban and Suburban Rail Vehicles - New Challenges for Climatic Testing,
Wien (eingeladen);
31.05.2012
- 01.06.2012; in: "International Workshop: Urban and Suburban Rail Vehicles - New Challenges for Climatic Testing",
Vienna Climatic Wind Tunnel,
(2012).
-
M. Kozek, N. Jovanovic:
"Effect of Noise on Block-Oriented Identification of the Physiological Propofol Model";
Vortrag: 4th International EUROSIM 2001 Congress,
Delft, Netherlands;
26.06.2001
- 29.06.2001; in: "Proceedings of the 4th International EUROSIM 2001 Congress",
(2001),
ISBN: 90-806441-1-0;
6 S.
Zusätzliche Informationen
-
M. Kozek, N. Jovanovic:
"Efficient Modelling of Propofol Pharmacokinetics: A Novel 2-Compartment Model";
Vortrag: 3rd Conference on Modeling and Simulation in Biology, Medicine and Biomedical Engineering,
Balamand, Lebanon;
28.05.2003
- 30.05.2003; in: "Proceedings of the 3rd Conference on Modeling and Simulation in Biology, Medicine and Biomedical Engineering",
(2003),
6 S.
Zusätzliche Informationen
-
M. Kozek, N. Jovanovic:
"Identification of Wiener/Hammerstein Nonlinear Systems with Extended Kalman Filters";
Vortrag: 2002 American Control Conference,
Anchorage, Alaska;
08.05.2002
- 10.05.2002; in: "Conference Proceedings of the 2002 American Control Conference",
(2002),
ISBN: 0-7803-7299-9;
6 S.
-
M. Kozek, N. Jovanovic:
"Parameter-Linear Modeling of Non-Linear Pharmacodynamics";
Vortrag: 3rd Conference on Modeling and Simulation in Biology, Medicine and Biomedical Engineering,
Balamand, Lebanon;
28.05.2003
- 30.05.2003; in: "Proceedings of the 3rd Conference on Modeling and Simulation in Biology, Medicine and Biomedical Engineering",
(2003),
6 S.
Zusätzliche Informationen
-
M. Kozek, J. Kunovsky:
"Efficient Application of Modern Taylor Series Methods to Stiff and High-Order Systems";
Hauptvortrag: CSSim2012, 3rd International Conference on Computer Modelling and Simulation,
Brno, Czech Republic (eingeladen);
03.09.2012
- 05.09.2012; in: "Proceedings of the 3rd Conference on Computer Modelling and Simulation 2012",
(2012),
ISBN: 978-80-214-4576-5;
19 S.
Zusätzliche Informationen
-
M. Kozek, A. Lorenz, P. Kampas:
"Modeling and Control of an Electric Servo Drive with Strong Restrictions in the Control Variable";
Vortrag: 12th International Conference on Mechanics in Medicine and Biology,
Bad Gastein;
12.09.2005
- 14.09.2005; in: "Proceedings of the 12th ISEM",
(2005),
ISBN: 3-902105-01-1;
S. 324
- 325.
Zusätzliche Informationen
-
M. Kozek, D. Miklau:
"Estimation of Molecular Weight Distribution of Cis-Polyisoprene Melts from Dielectric Loss Spectra Using Neural Networks";
Vortrag: 6th European Control Conference,
Porto, Portugal;
26.06.2001
- 29.06.2001; in: "Proceedings of the 6th European Control Conference",
(2001),
6 S.
-
M. Kozek, G. Puchhammer, H. Jörgl:
"A MISO sliding mode control for a high speed EMS MAGLEV-vehicle using disturbance estimation";
Vortrag: 3rd IEEE Conference on Control Applications,
Glasgow, Scotland;
24.08.1994
- 26.08.1994; in: "Proceedings of the 3rd IEEE Conference on Control Applications",
(1994),
S. 587
- 592.
-
M. Kozek, G. Puchhammer, H. Jörgl:
"Sliding mode control for a MAGLEV-vehicle using disturbance estimation";
Vortrag: 2nd International Conference on Motion and Vibration Control (MOVIC 1994),
Yokohama, Japan;
30.08.1994
- 02.09.1994; in: "Proceedings of the 2nd International Conference on Motion and Vibration Control",
(1994).
-
M. Kozek, S. Sinanovic:
"Identification of Wiener models using optimal local linear models";
Vortrag: 6th International EUROSIM Congress,
Ljubljana, Slovenia;
09.09.2007
- 13.09.2007; in: "Proceedings of the 6th EUROSIM Congress on Modelling and Simulation",
Vol.2
(2007),
ISBN: 978-3-901608-32-2;
Paper-Nr. 350,
6 S.
Zusätzliche Informationen
-
M. Kozek, W. Struckl:
"EcoTram - Energieeffizienz und thermischer Komfort in Straßenbahnen";
Vortrag: 12. Wiener Eisenbahnkolloquium,
Wien (eingeladen);
13.03.2014
- 14.03.2014; in: "Technisch-wirtschaftliche Optimierungspotentiale für den Nahverkehr",
N. Ostermann (Hrg.);
OVE-Schriftenreihe,
Band 74
(2014),
ISBN: 978-3-85133-080-9;
S. 135
- 141.
Zusätzliche Informationen
-
M. Kozek, A. Voigt:
"Model Based Decoupling Control for Waste Incineration Plants";
Vortrag: IEEE Conference on Industrial Electronics and Applications,
Singapore;
03.06.2008
- 05.06.2008; in: "Proceedings of the 3rd IEEE Conference on Industrial Electronics and Applications",
(2008),
ISBN: 978-1-4244-1718-6;
Paper-Nr. conf130a645,
6 S.
Zusätzliche Informationen
-
A. Kravos, D. Ritzberger, G. Tavcar, C. Hametner, S. Jakubek, T. Katrasnik:
"Parameter sensitivity analysis of a thermodynamically consistent electrochemical PEMFC model for virtual observers";
Vortrag: 8th European Fuel Cell Technology & Applications Piero Lunghi Conference - EFC19,
Neapel, Italien;
09.12.2019
- 11.12.2019; in: "Proceedings of EFC2019",
(2019).
-
M. Krommer, M. Pieber, Y. Vetyukov:
"Thin Shells With Piezoelctric Transducers: Theory, Numerical Modelling And Verification";
Vortrag: 7th ECCOMAS Thematic Conference on Smart Structures and Materials - SMART 2015,
Ponta Delgado, Azores;
06/2015; in: "Proc. of the 7th ECCOMAS Thematic Conference on Smart Structures and Materials - SMART 2015",
A. Arauo, C. Mota Soares (Hrg.);
(2015).
Zusätzliche Informationen
-
M. Krommer, Ch. Zehetner:
"Unified Analysis of Piezoelectric Bi-morph Torsion Transducers based on the d15 or the d36 Effect";
Vortrag: 6th ECCOMAS Thematic Conference on Smart Structures and Materials (SMART 2013),
Torino, Italy;
24.06.2013
- 28.06.2013; in: "Proc. of the 6th ECCOMAS Thematic Conference on Smart Structures and Materials (SMART 2013)",
E. Carrera, F. Miglioretti, M. Petrolo (Hrg.);
(2013),
20 S.
-
M. Krommer, M. Zellhofer:
"Spatial Compatibility Filters For Structural Health Monitoring";
Vortrag: 7th ECCOMAS Thematic Conference on Smart Structures and Materials - SMART 2015,
Ponta Delgado, Azores;
06/2015; in: "Proc. of the 7th ECCOMAS Thematic Conference on Smart Structures and Materials - SMART 2015",
A. Arauo, C. Mota Soares (Hrg.);
(2015).
Zusätzliche Informationen
-
T. Kuba, P. Lugner:
"Dynamic behaviour of tramways with different kinds of bogies";
Poster: 22nd International Symposium on Dynamics of Vehicles on Roads and Tracks,
Manchester;
14.08.2011
- 19.08.2011; in: "Proceedings of IAVSD 2011",
(2011),
6 S.
-
P. Leitão, S. Karnouskos, L. Ribeiro, P. Moutis, J. Barbosa, T. Strasser:
"Integration Patterns for Interfacing Software Agents with Industrial Automation Systems";
Vortrag: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society,
Washington DC, USA;
21.10.2018
- 23.10.2018; in: "Proceedings of the IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society",
IEEE,
(2018),
ISBN: 978-1-5090-6683-4;
6 S.
Zusätzliche Informationen
-
P. Leitão, T. Strasser, S. Karnouskos, L. Ribeiro, J. Barbosa, V. Huang:
"Recommendation of Best Practices for Industrial Agent Systems based on the IEEE 2660.1 Standard";
Vortrag: 2021 22nd IEEE International Conference on Industrial Technology (ICIT),
virtual;
10.03.2021
- 12.03.2021; in: "Proceedings of the 2021 22nd IEEE International Conference on Industrial Technology (ICIT)",
IEEE,
(2021),
ISBN: 978-1-7281-5730-6;
S. 1157
- 1162.
Zusätzliche Informationen
-
I. Leobner, A. Schirrer, S. Hauer, M. Kozek, K. Ponweiser:
"Energy System Modeling for Model Predictive Control of a Building";
Vortrag: 11th Conference on Sustainable Development of Energy, Water and Environment Systems (SDEWES 2016),
Lisabon;
04.09.2016
- 09.09.2016; in: "Proceedings of the 11th Conference on Sustainable Development of Energy, Water and Environment Systems",
Faculty of Mechanical Engineering and Naval Architecture, Zagreb,
(2016),
ISSN: 1847-7178;
S. 1
- 12.
Zusätzliche Informationen
-
I. Leobner, P. Smolek, B. Heinzl, P. Raich, A. Schirrer, M. Kozek:
"Simulation-based Strategies for Smart Demand Response";
Vortrag: 2nd South East European Conference on Sustainable Development of Energy, Water and Environment Systems (SEE SDEWES 2016),
Piran, Slovenia;
15.06.2016
- 18.06.2016; in: "Proceedings of the 2nd South East European Conference on Sustainable Development of Energy, Water and Environment Systems (SEE SDEWES 2016)",
(2016).
Zusätzliche Informationen
-
R. Lernbeiss:
"Ökologische Betrachtungen im Flugbetrieb";
Vortrag: LUFTFAHRT UND UMWELT,
Graz (eingeladen);
17.10.2007; in: "LUFTFAHRT UND UMWELT",
(2007),
29 S.
-
R. Lernbeiss:
"Simulation of the dynamic behaviour of an aircraft landing gear during landing";
Vortrag: 6th Simpack User Meeting,
Eisenach;
09.11.2004
- 10.11.2004; in: "6th Simpack User Meeting",
(2004).
-
S Litschauer, H. Ecker:
"Fahrversuche und Analyse des Fahrstreifenwechsels mit Motorrädern";
Vortrag: Online-IFZ-Konferenz 13th International Motorcycle Conference,
Deutschland;
01.09.2020
- 06.09.2020; in: "Web-Proceedings of 13th International Motorcycle Conference",
(2020),
22 S.
Zusätzliche Informationen
-
C. Lohninger, B. Voglauer, K. Matheis-Weiss, M. Kozek:
"Efficient modelling and control design for suppression of pressure oscillations in an industrial condensation process";
Vortrag: 22nd International Conference on System Theory, Control and Computing,
Sinaia;
10.10.2018
- 12.10.2018; in: "Proceedings of the 22nd International Conference on System Theory, Control and Computing, ICSTCC 2018",
(2018),
8 S.
Zusätzliche Informationen
-
A. Lorenz, M. Kozek:
"Automatic cycle border detection for a statistic evaluation of the loading process of earth-moving vehicles";
Vortrag: 2007 SAE Commercial Vehicle Engineering Congress & Exhibition,
Rosemont, Illinois, USA;
30.10.2007
- 01.11.2007; in: "SAE Technical Paper Series",
SAE International, 400 Commonwealth Drive, Warrendale, PA, USA,
2007-01-4191
(2007).
Zusätzliche Informationen
-
A. Lorenz, M. Kozek:
"Comparison of Polynomial and Neural Network Models for Information Extraction from a Data Base of Measurements";
Vortrag: 2008 International Simulation Multi-conference,
Edinburgh, Scotland;
16.06.2008
- 19.06.2008; in: "Proceedings of the 2008 Summer Simulation Multiconference",
(2008),
ISBN: 1-56555-320-9;
8 S.
Zusätzliche Informationen
-
A. Lorenz, M. Kozek:
"Data based damage prediction of commercial vehicles using Bayesian Networks";
Vortrag: SAE 2008 Commercial Vehicle Engineering Congress & Exhibition,
Rosemont, Illinois, USA;
07.10.2008
- 09.10.2008; in: "SAE Commercial Vehicle Engineering Congress & Exhibition",
SAE International,
(2008),
10 S.
Zusätzliche Informationen
-
E. Luchini, M. Kozek:
"Disturbance observer and ageing estimation for a temperature controlled food transporter";
Vortrag: 2018 SICE International Symposium on Control Systems,
Tokyo, Japan;
09.03.2018
- 11.03.2018; in: "2018 SICE International Symposium on Control Systems",
(2018),
S. 1
- 8.
Zusätzliche Informationen
-
E. Luchini, A. Poks, D. Radler, M. Kozek:
"Model predictive temperature control for a food-transporter with door openings";
Vortrag: SICE International Symposium on Control Systems 2020,
Tokushima, Japan;
03.05.2020
- 05.05.2020; in: "SICE International Symposium on Control Systems 2020",
(2020),
Paper-Nr. 3E2-3,
6 S.
-
E. Luchini, A. Schirrer, M. Kozek:
"A hierarchical MPC for multi-objective mixed-integer optimisation applied to redundant refrigeration circuits";
Vortrag: IFAC World Congress 2017,
Toulouse;
09.07.2017
- 14.07.2017; in: "IFAC World Congress 2017",
IFAC Papers Online,
(2017),
7 S.
Zusätzliche Informationen
-
P. Lugner:
"Systemdynamik von Fahrzeugen";
Vortrag: Seminar der Carl-Cranz-Gesellschaft,
Oberpfaffenhofen, Deutschland (eingeladen);
05.07.2004
- 09.07.2004; in: "Systemdynamik, Regelung und Simulation von Fahrzeugen",
(2004).
-
P. Lugner:
"Systemdynamik, Regelung und Simulation von Fahrzeugen";
Vortrag: Seminar der Carl-Cranz-Gesellschaft,
Weßling, Deutschland (eingeladen);
04.07.2005
- 08.07.2005; in: "Systemdynamik, Regelung und Simulation von Fahrzeugen",
(2005).
-
P. Lugner:
"Systemdynamik, Regelung und Simulation von Fahrzeugen";
Vortrag: Seminar der Carl-Cranz-Gesellschaft,
Weßling, Deutschland (eingeladen);
27.06.2011
- 01.07.2011; in: "Systemdynamik, Regelung und Simulation von Fahrzeugen",
(2011).
-
P. Lugner:
"Tyre models; propulsion and handling of road vehicles";
Hauptvortrag: CISM Course,
Udine (eingeladen);
23.10.2006
- 27.10.2006; in: "Dynamic analysis of vehicle systems",
(2006),
125 S.
-
P. Lugner, R. Mundl:
"Tire models for vehicle dynamics and evaluation of their performance";
Vortrag: Intelligent Tire Technology,
Frankfurt (eingeladen);
28.09.2009
- 30.09.2009; in: "Intelligent Tire Technology",
(2009),
82 S.
-
P. Lugner, M. Plöchl, A. Riepl:
"Investigation of passenger car-trailer dynamics controlled by additional braking of the trailer";
Vortrag: Int. Symposium on Advanced Vehicle Control 1996,
Aachen, Deutschland;
24.06.1996
- 28.06.1996; in: "AVEC'96",
(1996),
S. 763
- 778.
-
P. Lugner, M. Plöchl, A. Riepl:
"Trailer Swing Stabilization by Additional Unilateral Braking of the Trailer";
Vortrag: 33rd Meeting of Bus and Coach Experts,
Keszthely;
02.09.2002
- 04.09.2002; in: "International Conference on Vehicle Safety and Reliability",
Hungary
(2002),
ISBN: 9639058173;
S. 1
- 11.
-
C. Maier, A. Schirrer, M. Kozek:
"Real-time capable nonlinear pantograph models using local model networks in state-space configuration";
Vortrag: IFAC Symposium on Mechatronic Systems,
Loughborough;
05.09.2016
- 08.09.2016; in: "Proceedings of the 7th IFAC Symposium on Mechatronic Systems",
IFAC-PapersOnLine,
49/21
(2016),
ISSN: 2405-8963;
S. 157
- 162.
Zusätzliche Informationen
-
B. Mayer, M. Killian, M. Kozek:
"Cooperative and Hierarchical Fuzzy MPC for Building Heating Control";
Vortrag: 2014 IEEE World Congress on Computational Intelligence (IEEE WCCI 2014),
Beijing, China;
06.07.2014
- 11.07.2014; in: "Proceedings of the 2014 IEEE International Conference on Fuzzy Systems (FUZZ-IEEE)",
IEEE Xplore,
(2014),
ISBN: 978-1-4799-2072-3;
Paper-Nr. F-14083,
6 S.
Zusätzliche Informationen
-
B. Mayer, M. Killian, M. Kozek:
"Modeling Workflow for a Building Model for Control Purposes";
Vortrag: 3rd International Conference on Systems and Control,
Algiers, Algeria;
29.10.2013
- 31.10.2013; in: "Proceedings of the 3rd International Conference on Systems and Control",
(2013),
6 S.
Zusätzliche Informationen
-
B. Mayer, M. Killian, M. Kozek:
"Modular Model Predictive Control Concept for Building Energy Supply Systems: Simulation Results for a Large Office Building";
Vortrag: The 9th Eurosim Congress on Modelling and Simulation,
Oulu, Finland;
12.09.2016
- 16.09.2016; in: "9th EUROSIM Congress on Modelling and Simulation",
(2016),
S. 1
- 6.
Zusätzliche Informationen
-
C. Mayr, N. Euler-Rolle, S. Jakubek:
"Automatic tuning of PID Controllers in Engine Control Units by means of Local Model Networks and Evolutionary Optimization";
Vortrag: 2014 IEEE International Conference on Fuzzy Systems (FUZZ-IEEE),
Beijing, China;
06.07.2014
- 11.07.2014; in: "Proceedings of the 2014 IEEE International Conference on Fuzzy Systems (FUZZ-IEEE)",
(2014),
ISBN: 978-1-4799-2072-3;
S. 901
- 906.
Zusätzliche Informationen
-
C. Mayr, A Fleck, S. Jakubek:
"Hybrid Powertrain Control Using Optimization and Cycle Based Predictive Control Algorithms";
Vortrag: International Conference on Control & Automation,
Santiago de Chile;
19.12.2011
- 21.12.2011; in: "Proceedings of the 9th IEEE International Conference on Control & Automation",
(2011),
S. 937
- 944.
Zusätzliche Informationen
-
C. Mayr, C. Hametner, S. Jakubek:
"Methoden zur Stabilitätsanalyse von dynamischen lokalen Modellnetzwerken";
Vortrag: GAMM-GMA-Workshop,
Salzburg;
22.09.2010
- 24.09.2010; in: "GMA Fachausschuss 1.30 Workshop in Salzburg/Anif 2010",
B. Lohmann, A. Kugi (Hrg.);
Technische Universität Wien Institut für Automatisierung- und Regelungstechnik,
(2010),
ISBN: 978-3-9502451-7-2;
14 S.
Zusätzliche Informationen
-
C. Mayr, C. Hametner, S. Jakubek:
"Nichtlineares PID Reglerdesign mit lokalen Modellnetzwerken";
Vortrag: GMA-Fachausschuss 1.30,
Salzburg;
19.09.2012
- 21.09.2012; in: "GMA-Fachausschuss 1.30 "Modellbildung, Identifikation und Simulation in der Automatisierungstechnik"",
Technische Universität Darmstadt,
(2012),
ISBN: 978-3-9815012-2-3;
S. 11
- 22.
Zusätzliche Informationen
-
C. Mayr, C. Hametner, M. Kozek, S. Jakubek:
"Nonlinear Stable PID Controller Design using Local Model Networks";
Vortrag: 20th Mediterranean Conference on Control and Automation 2012,
Barcelona;
03.07.2012
- 06.07.2012; in: "2012 20th Mediterranean Conference on Control & Automation (MED)",
(2012),
S. 842
- 847.
Zusätzliche Informationen
-
C. Mayr, C. Hametner, M. Kozek, S. Jakubek:
"Piecewise Quadratic Stability Analysis for Local Model Networks";
Vortrag: Multi-conference on System and Control,
Denver, USA;
28.09.2011
- 30.09.2011; in: "Proceedings of the 2011 IEEE Multi-conference on System and Control",
(2011),
ISBN: 978-1-4577-1062-9;
S. 1418
- 1424.
Zusätzliche Informationen
-
C. Mayr, C. Hametner, M. Kozek, S. Jakubek:
"Relaxed Fuzzy Lyapunov Approach for Dynamic Local Model Networks";
Vortrag: 2011 IEEE International Conference On Fuzzy Systems,
Taipei, Taiwan;
27.06.2011
- 30.06.2011; in: "Proceedings of the 2011 IEEE International Conference On Fuzzy Systems",
(2011),
ISBN: 978-1-4244-7315-1;
S. 1546
- 1553.
Zusätzliche Informationen
-
C. Mayr, C. Hametner, M. Kozek, S. Jakubek:
"Stability Analysis of PID Controlled Local Model Networks";
Vortrag: IFAC Conference on Advances in PID Control,
Brescia;
28.03.2012
- 30.03.2012; in: "Proceedings of the IFAC Conference on Advances in PID Control",
(2012).
Zusätzliche Informationen
-
D. Mayrhofer, M. Kaltenbacher:
"A New Method of Digital Sound Reconstruction";
Vortrag: DAGA 2020,
Hannover;
16.03.2020
- 19.03.2020; in: "DAGA 2020",
(2020).
-
H. Metered, M. Kozek, Z. Sika:
"Characterization of smart fluid dampers using restoring force surface method based on acceleration feedback";
Vortrag: 7th ECCOMAS Thematic Conference on Smart Structures and Materials,
Ponta Delgada, Azores;
03.06.2015
- 06.06.2015; in: "Proceedings of the 7th ECCOMAS Thematic Conference on Smart Structures and Materials",
(2015),
Paper-Nr. ID157,
14 S.
Zusätzliche Informationen
-
H. Metered, M. Kozek, Z. Sika:
"Vibration control of active vehicle suspension using fuzzy based sliding surface";
Vortrag: 19th International Conference on Circuits, Systems, Communications and Computers, (CSCC 2015),
Zakynthos Island, Greece (eingeladen);
16.07.2015
- 20.07.2015; in: "CSCC 2015",
(2015).
Zusätzliche Informationen
-
J. Metzger, H. Husstedt, M. Kaltenbacher:
"Characterization of the ACCMF-System for a simultaneous calibration technique";
Vortrag: 6th Congress of the Alps Adria Acoustic Association,
Graz;
16.10.2014
- 17.10.2014; in: "Proceedings of the 6th Congress of the Alps Adria Acoustic Association",
H. Husstedt, M. Kaltenbacher (Hrg.);
(2014),
ISBN: 978-3-200-03921-6.
-
J. Metzger, M. Kaltenbacher:
"A comparison of measurement techniques to determine the acoustic impedance at oblique sound incidence angle";
Vortrag: DAGA 2015,
Nürnberg;
16.03.2015
- 19.03.2015; in: "41. Jahrestagung für Akustik",
M. Kaltenbacher (Hrg.);
(2015),
S. 780
- 783.
Zusätzliche Informationen
-
J. Metzger, M. Kaltenbacher:
"Simulation of sound fields using realistic boundary conditions";
Vortrag: DAGA 2014,
Kiel;
06.03.2017
- 09.03.2017; in: "43. Jahrestagung für Akustik",
(2017).
-
J. Metzger, M. Kaltenbacher:
"Simultane Kalibrierung der drei Komponenten des Schnellesensors einer pv-Sonde mit Hilfe eines schwingenden Kolbens";
Vortrag: DAGA 2014, 40. Jahrestagung für Akustik,
Oldenburg;
10.03.2014
- 13.03.2014; in: "Fortschritte der Akustik - DAGA 2014",
(2014),
ISBN: 978-3-939296-06-5;
S. 638
- 639.
-
J. Metzger, M. Kaltenbacher:
"Simultaneous calibration of all three acoustic particle velocity components of a pressure-velocity probe";
Vortrag: Internoise 2013,
Innsbruck;
15.09.2013
- 18.09.2013; in: "Proceedings of Internoise 2013",
(2013),
7 S.
Zusätzliche Informationen
-
J. Metzger, S. Tschallener, M. Kaltenbacher:
"Separation of an incoming and reflecting impulse for determining angle-dependent acoustic properties in situ";
Vortrag: DAGA 2016,
Aachen;
14.03.2016
- 17.03.2016; in: "42. Jahrestagung für Akustik",
(2016),
S. 802
- 805.
-
G Mikota, H. Ecker:
"Model correlation for special types of rotor systems";
Vortrag: The 13th International Conference on Dynamics of Rotating Machinery,
Lyngby;
13.02.2019
- 15.02.2019; in: "Proceeding of 13th SIRM",
Technical University of Denmark,
Lyngby
(2019),
ISBN: 978-87-7475-568-5;
S. 360
- 369.
Zusätzliche Informationen
-
M. Miletic, A. Schirrer, M. Kozek:
"Load Management in Smart Grids with Utilization of Load-Shifting Potential in Building Climate Control";
Vortrag: International Symposium on Smart Electric Distribution Systems and Technologies (EDST), 2015,
Vienna;
07.09.2015
- 08.09.2015; in: "6th Symposium on Communications for Energy Systems",
IEEE,
(2015),
S. 468
- 474.
Zusätzliche Informationen
-
M. Mössner, D. Heinrich, K. Schindelwig, P. Kaps, P. Lugner, H. Schmiedmayer, H. Schretter, W. Nachbauer:
"Modeling of the ski-snow contact for a carved turn";
Vortrag: 6th World Conference "The Engineering of Sport",
Munich;
11.07.2006
- 14.07.2006; in: "International Sport Engineering Association (ISEA)",
E.F. Moritz, S. Haake (Hrg.);
2
(2006),
S. 195
- 200.
-
D. Murschenhofer, D. Kuzdas, S. Braun, S. Jakubek:
"Development of a real-time capable proton exchange membrane fuel cell model";
Vortrag: 12th European Fluid Mechanics Confererence (EFMC 12),
Technische Universität Wien, Vienna/AT;
09.09.2018
- 12.09.2018; in: "Book of Abstracts",
H.C. Kuhlmann (Hrg.);
(2018),
ISBN: 978-3-200-05859-0;
S. 332.
Zusätzliche Informationen
-
R. Nabergoj, A. Tondl, H. Ecker:
"To the problem of self-excited systems having several unstable vibration modes";
Vortrag: Dynamics of Machines 2006,
Prague, Czech Republic;
07.02.2006
- 08.02.2006; in: "Proceedings Dynamics of Machines 2006",
L. Pesek (Hrg.);
Ustav termomechaniky AV CR,
Praha
(2006),
ISBN: 80-85918-97-8;
S. 8.
Zusätzliche Informationen
-
V. Nawrath, T. Hüsemann, G. Burk, M. Plöchl, J. Edelmann:
"Influence of the Properties of Wheels on the Overall Wheel Characteristics of a Motor Vehicle";
Vortrag: 29. Aaachen Colloquium - Sustainable Mobility,
Aachen (Digital Event);
05.10.2020
- 07.10.2020; in: "29th Aachen Colloquium Sustainable Mobility 2020",
(2020).
-
M. Nebel, M. Vogels, T. Combé, T. Winsel, H. Pflügl, C. Hametner:
"Global Dynamic Models for XiL-based Calibration";
Vortrag: SAE World Congress 2010,
Detroit;
13.04.2010
- 15.04.2010; in: "Proceedings of SAE 2010 World Congress & Exhibition",
(2010),
Paper-Nr. 2010-01-0329,
12 S.
Zusätzliche Informationen
-
M. Neumann, J. Wassermann:
"Safety Aspects Using Laser Based Measurement Devices";
Vortrag: 15th International Conference and User Meeting (Stress - Strain - Vibration - Non Destructive Testing),
Ulm, Germany;
22.09.2008
- 23.09.2008; in: "15th International Conference and User Meeting",
Dantec Dynamics,
(2008),
ISBN: 978-3-00-025353-9;
S. 1
- 13.
Zusätzliche Informationen
-
G. Novak, M Seyr:
"Simple path planning algorithm for two-wheeled differentially driven (2WDD) soccer robots";
Vortrag: Proceedings of the second workshop on intelligent solutions in embedded systems,
Graz, Austria;
25.06.2004; in: "Proceedings of the second workshop on intelligent solutions in embedded systems",
(2004),
ISBN: 3-902463-00-7.
-
J. Nusime, F. Klinger, J. Edelmann, G. Magnani, M. Plöchl:
"Some considerations on modelling bicycle wobble at high speed";
Vortrag: Symposium on the Dynamics and Control of Single Track Vehicles,
Narashino, Japan;
11.11.2013
- 13.11.2013; in: "Bicycle and Motorcycle Dynamics 2013",
(2013),
9 S.
-
P.W. Nussbaumer, C. Macek, M. Plöchl, T. Wolbank:
"Dynamics of four-wheel-drive electric vehicle during machine fault condition";
Vortrag: European Conference on Power Electronics and Applications (EPE),
Lille, Spain;
02.09.2013
- 06.09.2013; in: "Proceedings of 15th Conference on Power Electronics and Applications",
(2013),
ISBN: 978-90-75815-17-7;
S. 1
- 10.
Zusätzliche Informationen
-
P.W. Nussbaumer, C. Zöller, M. Plöchl, T. Wolbank:
"Transient Distribution of Voltages in Induction Machine Stator Windings Resulting from Switching of Power Electronics";
Vortrag: IEEE Industrial Electronics Society,
Wien;
10.11.2013
- 13.11.2013; in: "Proceedings of Conference on IEEE Industrial electronics Society (IECON)",
(2013),
ISBN: 978-1-4799-0223-1;
S. 3186
- 3191.
Zusätzliche Informationen
-
Chr. Ott, B. Angrosch, J. Edelmann, M. Plöchl:
"Some investigations on the wobble mode of a bicycle";
Vortrag: Bicycle and Motorcycle Dynamics 2010,
Delft;
20.10.2010
- 22.10.2010; in: "Symposium on Dynamics and Control of Single Track Vehicles",
A.L. Schwab, J.P. Meijaard (Hrg.);
(2010),
ISBN: 9789491104015;
11 S.
-
N. Paces, M. Harasek, M. Kozek:
"Efficient dynamic modelling of a trickle bed reactor for desulphurisation of biogas";
Vortrag: 6th Vienna Mathmod 09,
Vienna;
11.02.2009
- 13.02.2009; in: "Proceedings of the 6th Mathmod Vienna 09",
Argesim Report,
No. 35
(2009),
ISBN: 978-3-901608-35-3;
Paper-Nr. 204,
7 S.
Zusätzliche Informationen
-
N. Paces, M. Kozek:
"Modeling of a Grate-Firing Biomass Furnace for Real-Time Application";
Vortrag: International Symposium on Models and Modeling Methodologies in Science and Engineering: MMMse 2011,
Orlando, Florida, USA;
27.03.2011
- 30.03.2011; in: "Symposium on Models and Modeling Methodologies in Science and Engineering: MMMse 2011",
(2011),
ISBN: 9781936338221;
6 S.
Zusätzliche Informationen
-
N. Paces, A. Voigt, S. Jakubek, A. Schirrer, M. Kozek:
"Combined Control of Combustion Load and Combustion Position in a Moving Grate Biomass Furnace";
Vortrag: 19th Mediterranean Conference on Control and Automation,
Corfu;
20.06.2011
- 23.06.2011; in: "Proceedings of the 19th Mediterranean Conference on Control and Automation",
(2011),
Paper-Nr. ThCT3.7,
6 S.
Zusätzliche Informationen
-
N. Paces, A. Voigt, M. Kozek:
"A Comparison of Different Moving Grate Models for a Biomass Furnace";
Vortrag: CSSim2011, 2nd International Conference on Computer Modelling and Simulation,
Brno, Czech Republic;
05.09.2011
- 07.09.2011; in: "Proceedings of the 2nd International Conference on Computer Modelling and Simulation-CSSim2011",
(2011),
ISBN: 9788021443204;
9 S.
Zusätzliche Informationen
-
A. Pajaziti, I. Gojani, G. Shala, P. Kopacek:
"Coordination of the Multi Agent System and its Application to Robot Soccer";
Vortrag: IFAC Conference on Supplemental Ways for Improving International Stability through Automation ISA'06,
Prishtina, Kosovo;
15.06.2006
- 17.06.2006; in: "Improving Stability in Developing Nations Through Automation 2006 - A Proceedings Volume from the IFAC Conference on Supplemental Ways for Improving International Stability through Automation ISA'06",
(2006),
ISBN: 9780080454061;
S. 95
- 100.
-
I. Park, K. Choi, D. Hong, M. Han, P. Kopacek:
"The Optimization of Cooperative Motion for Humanoid Robots with 20-DOF Using Genetic Algorithms";
Vortrag: Third International Conference on Autonomous Robots and Agents,
Massey University, Palmerston North, New Zealand;
12.12.2006
- 14.12.2006; in: "Proceedings of the Third International Conference on Autonomous Robots and Agents",
(2006),
ISBN: 978-0-473-11566-1.
-
P. Paschinger, H. Amri, K. Hartentahler, M. Weigand:
"Compound-Split Drivetrains For Rotorcraft";
Vortrag: 43rd European Rotorcraft Forum 2017,
Milan, Italy;
12.09.2017
- 15.09.2017; in: "43rd European Rotorcraft Forum 2017",
(2017),
S. ERF2017_58.
Zusätzliche Informationen
-
D. Perchtold, M. Kaltenbacher, H. Husstedt:
"Testing of Thin Permanent Magnets at Higher Frequencies";
Vortrag: 17th International Conference on Sensors and Measurement Technology,
Nürnberg;
19.05.2015
- 21.05.2015; in: "PROCEEDINGS - AMA Conferences 2015",
(2015),
S. 142
- 146.
-
B. Petermeier:
"Parametric resonances of a cantilever beam with attached lumped masses";
Vortrag: Dynamics of Machines 2008,
Prag;
05.02.2008
- 06.02.2008; in: "Proceedings Dynamics of Machines 2008",
L. Pesek (Hrg.);
Institute of Thermomechanics, ASCR,
Prague
(2008),
ISBN: 978-80-87012-10-9;
S. 119
- 126.
Zusätzliche Informationen
-
B. Petermeier, H. Ecker:
"Vibration suppression of a cantilever beam by open-loop control of an attached stiffness element";
Vortrag: 6th EUROMECH Conference ENOC 2008,
St. Petersburg;
30.06.2008
- 04.07.2008; in: "Proceedings of the 6th EUROMECH Conference ENOC 2008",
(2008),
Paper-Nr. 59,
10 S.
Zusätzliche Informationen
-
M. Plöchl:
"Zur Stabilität des Fahrrads - Theorie und praktischer Versuch";
Vortrag: Verkehrssicherheit Fahrrad,
Wien (eingeladen);
15.06.2010; in: "Verkehrssicherheit Fahrrad",
(2010).
-
M. Plöchl, P. Lugner:
"Driver behaviour consequences for a passenger car with and without trailer";
Vortrag: Int. Symposium on Advanced Vehicle Control 1998,
Nagoya, Japan;
14.09.1998
- 18.09.1998; in: "AVEC'98",
(1998),
S. 673
- 678.
-
M. Plöchl, P. Lugner:
"Passenger car-trailer dynamics";
Vortrag: Advances in Vehicle Control and Safety,
Amiens, France;
01.07.1998
- 03.07.1998; in: "AVCS'98",
(1998),
S. 480
- 485.
-
M. Plöchl, P. Lugner:
"Reaction of the vehicle-driver system to unexpected external disturbances";
Vortrag: EAEC European Automotive Congress,
Barcelona;
30.06.1999
- 02.07.1999; in: "EAEC European Automotive Congress",
(1999).
-
M. Plöchl, P. Lugner:
"Theoretical investigations of the interaction driver-feedback controlled automobile";
Vortrag: Int. Symposium on Advanced Vehicle Control 1994,
Tsukuba, Japan;
24.10.1994
- 28.10.1994; in: "AVEC'94",
(1994),
S. 42
- 48.
-
G. Pöchmann, P. Kopacek:
"End of Life Management of Fluid Pumps";
Vortrag: Going Green CARE Innovation 2010,
Schoenbrunn Palace Conference Centre, Vienna (Austria);
08.11.2010
- 11.11.2010; in: "Conference Proceedings of the Going Green CARE Innovation 2010",
(2010).
-
A. Poks, E. Luchini, F. Kitanoski, M. Kozek:
"Wholistic simulation of an all-electric refrigerated delivery vehicle";
Vortrag: SICE International Symposium on Control Systems 2020,
Tokushima, Japan;
03.05.2020
- 05.05.2020; in: "SICE International Symposium on Control Systems 2020",
(2020),
Paper-Nr. 1E1-1,
6 S.
-
S. Popprath, C. Benatzky, C. Bilik, M. Kozek, A. Stribersky, J. Wassermann:
"Experimental modal analysis of a scaled car body for metro vehicles";
Vortrag: ICSV13 - Thirteenth International Congress on Sound and Vibration,
Vienna;
02.07.2006
- 06.07.2006; in: "CD-ROM Proceedings of the Thirtheenth International Congress on Sound and Vibration (ICSV13)",
(2006),
ISBN: 3-9501554-5-7;
Paper-Nr. 683,
8 S.
Zusätzliche Informationen
-
S. Popprath, A. Schirrer, C. Benatzky, M. Kozek, J. Wassermann:
"Experimental modal analysis of an actively controlled scaled metro vehicle car body";
Vortrag: ICSV14, 14th International Congress on Sound and Vibration,
Cairns, Australia;
09.07.2007
- 12.07.2007; in: "Proceedings of the 14th International Congress on Sound and Vibration",
(2007),
ISBN: 9780733425165;
Paper-Nr. 805,
8 S.
Zusätzliche Informationen
-
R. Priesner, R. Bauer:
"High Dynamic Control of Hybrid Vehicle Combustion Engine Test Beds";
Vortrag: International Conference on Mechanical Engineering and Mechatronics,
Toronto;
08.08.2013
- 09.08.2013; in: "Proceedings of the International Conference on Mechanical Engineering and Mechatronics 2013",
(2013),
8 S.
Zusätzliche Informationen
-
N. Pugno, H. Troger, A. Steindl, M. Schwarzbart:
"On the Stability of the Track of the Space Elevator";
Vortrag: 57th International Astronautical Congress,
Valencia;
02.10.2006
- 06.10.2006; in: "57th International Astronautical Congress",
International Astronautical F. (Hrg.);
(2006).
Zusätzliche Informationen
-
T. Pumhössel:
"Parametric control of blade vibrations in rotating machinery";
Vortrag: 4th International Symposium on Stability Control of Rotating Machinery (ISCORMA-4),
Calgary, Canada;
27.08.2007
- 31.08.2007; in: "Proceedings of the 4th International Symposium on Stability Control of Rotating Machinery",
Bently Pressurized Bearing Comp.,
(2007),
Paper-Nr. 501,
12 S.
Zusätzliche Informationen
-
T. Pumhössel, H. Ecker, P. Hehenberger, K. Zeman:
"Controlled modal energy transfer in torsional systems using impulsive parametric excitation";
Vortrag: 9th IFToMM International Conference on Rotor Dynamics,
Mailand;
22.09.2014
- 25.09.2014; in: "Proceedings 9th IFToMM International Conference on Rotor Dynamics",
(2014),
Paper-Nr. MIQ9Z4,
10 S.
Zusätzliche Informationen
-
T. Pumhössel, H. Ecker, A. Tondl:
"Zum Einfluss einer periodischen axialen Kraft auf die lateralen Schwingungen eines Laval-Rotors";
Vortrag: 9. Internationale Tagung Schwingungen in rotierenden Maschinen (SIRM 2011),
Darmstadt;
21.02.2011
- 23.02.2011; in: "Tagungsbeiträge - Proceedings SIRM 2011",
R Markert (Hrg.);
Technische Univ. Darmstadt,
(2011),
ISBN: 978-3-9814163-0-5;
Paper-Nr. ID-10,
10 S.
Zusätzliche Informationen
-
T. Pumhössel, H. Springer:
"Active Damping of Vibrations of a Lightweight Beam Structure - Experimental Results";
Vortrag: 9th International Conference on Motion and Vibration Control,
Munich;
15.09.2008
- 18.09.2008; in: "Proceedings-CD MOVIC 2008",
(2008),
Paper-Nr. 1150,
10 S.
Zusätzliche Informationen
-
T. Pumhössel, H. Springer:
"Active Vibration Control of Nonlinear Cantilever Shaped Blades in Turbomachinery";
Vortrag: IFToMM 7th International Conference on Rotor Dynamics,
Wien;
25.09.2006
- 28.09.2006; in: "Proceedings 7th International Conference on Rotor Dynamics",
H. Springer, H. Ecker (Hrg.);
Institute of Mechanics and Mechatronics,
Vienna
(2006),
ISBN: 3-200-00689-7;
Paper-Nr. 200,
10 S.
-
T. Pumhössel, H. Springer:
"Aktive Schwingungsdämpfung eines einseitig eingespannten Balkens als Modell einer Turbinenschaufel";
Vortrag: SIRM-Workshop - Mechatronik in der Rotordynamik,
Kassel;
01.03.2007
- 02.03.2007; in: "Schwingungen in rotierenden Maschinen",
(2007),
26 S.
-
B. Putz:
"Development of the new Soccer Robots "Roby-Speed" and "Roby-Naro"";
Vortrag: 2004 Korea-Austria Joint Seminar on Intelligent Robotics (während 2004 FIRA Robot World Congress),
Bexco, Busan, Korea;
28.10.2004; in: "2004 Korea-Austria Joint Seminar on Intelligent Robotics ",
(2004),
S. 32
- 37.
-
B. Putz:
"Development of the new Soccer Robots "Roby-Speed" and "Roby-Naro"";
Vortrag: CLAWAR / EURON / IARP Workshop on Robots in Entertainment, Leisure and Hobby - ELH'04,
Vienna University of Technology, Vienna, Austria;
02.12.2004
- 04.12.2004; in: "CLAWAR / EURON / IARP Workshop on Robots in Entertainment, Leisure and Hobby - ELH'04 Proceedings",
Institut für Mechanik und Mechatronik / Abt. 6 Intelligente Handhabungs- und Robotertechnik,
TU Wien, Wien, Österreich
(2004),
ISBN: 3-902161-04-3.
-
B. Putz, M. Han, P. Kopacek:
"IMPLEMENTATION OF ACCELERATION SENSORS IMPROVING DYNAMIC BEHAVIOUR OF A";
Vortrag: 5th IFAC/EURON Symposium on Intelligent Autonomous Vehicles,
Lissabon, Portugal;
05.07.2004
- 07.07.2004; in: "IAV2004-Preprints, 5th IFAC/EURON SYMPOSIUM ON INTELLIGENT AUTONOMOUS VEHICLES",
(2004),
6 S.
-
B. Putz, M. Würzl:
"A new Generation of Soccer Robots - IHRT";
Vortrag: Fira Robot World Congress 2003,
Messe Congress Center, Wien, Österreich;
01.10.2003
- 03.10.2003; in: "Proceedings of the 2nd Fira Robot Soccer World Congress - Volume 2",
Messe Congress Center, Wien, Österreich
(2003),
ISBN: 3-902161-01-9;
S. 57
- 60.
-
M. Quasthoff, J. Unger, S. Jakubek:
"Entwicklungsmethodik eines generischen Batterie-Simulationsmodells und dessen Einsatzmöglichkeiten";
Vortrag: 5. Fachtagung Baumaschinentechnik 2012,
Dresden;
20.09.2012
- 21.09.2012; in: "Baumaschinentechnik 2012 - Energie, Mechatronik, Simulation",
Schriftreihe der Forschungsvereinigung Bau- und Baustoffmaschinen e.V. (FVB),
Heft Nr. 44
(2012),
S. 263
- 284.
Zusätzliche Informationen
-
W. Reichenfelser, M. Gföhler, T. Kakebeeke, P. Lugner, G. Feik:
"Determination of efficient stimulation patterns for FES - cycling";
Vortrag: EMBEC`05,
Prague;
20.11.2005
- 25.11.2005; in: "IFMBE Proc.",
(2005).
Zusätzliche Informationen
-
W. Reichenfelser, M. Gföhler, T. Kakebeeke, P. Lugner, G. Feik:
"Optimierung der Stimulationsbereiche für das FES- Radfahren";
Vortrag: ÖGBMT Jahrestagung,
Hall;
10.11.2005
- 12.11.2005; in: "Proc. CD",
(2005).
Zusätzliche Informationen
-
W. Reichenfelser, M. Gföhler, S. Mina, S. Hanke, H. Hackl, T. Kakebeeke, P. Lugner, A. Hochgatterer:
"FES-Fahrradtrainingssystem für Paraplegiker";
Vortrag: 20. Jahrestagung der DMGP,
Wien;
09.05.2007
- 12.05.2007; in: "20. Jahrestagung der DMGP - der thorakolumbale Übergang",
(2007).
-
W. Reichenfelser, H. Hackl, S. Mina, S. Hanke, P. Lugner, M. Gföhler:
"Trainings- and Measurement- System for FES-Cycling";
Poster: 13th Annual Conf. of the International Functional Electrical Stimulation Society,
Freiburg, Germany;
21.09.2008
- 25.09.2008; in: "IFESS 2008- from movement to mind",
Biomedizinische Technik,
Vol. 53 Suppl.1, Berlin, New York
(2008),
ISSN: 0939-4990;
S. 265
- 267.
Zusätzliche Informationen
-
I. Reichl, W. Auzinger, H. Schmiedmayer, E. Weinmüller:
"A study of constrained models for the kinematic analysis of the human knee joint";
Vortrag: 36ème Congrès de la Société de Biomécanique,
Besançon (eingeladen);
31.08.2011
- 02.09.2011; in: "Computer Methods in Biomechanics and Biomedical Engineering",
Taylor & Francis,
14
(2011),
S1;
S. 77
- 79.
-
I. Reichl, W. Auzinger, H. Schmiedmayer, E. Weinmüller:
"Model dependence of knee joint rotation angles";
Poster: ISB 2011,
Brüssel;
03.07.2011
- 07.07.2011; in: "XXIII ISB Congress (ISB2011) Proceedings",
International Society of Biomechanics,
(2011),
ISSN: 1476-8259;
2 S.
-
W. Reinalter, G. Wölfel, B. Angrosch, M. Plöchl:
"Application of design of experiments and numerical optimization in the kinematics design process of suspension systems";
Vortrag: International Munich Chassis Symposium,
München;
07.06.2011
- 08.06.2011; in: "Chassis.tech plus",
Springer Automotive Media, ATZ Live,
(2011),
S. 237
- 252.
-
H. Renezeder, A. Steindl, Ch. Troger:
"On the dynamics of axially moving strings";
Vortrag: GAMM 2004,
Dresden;
21.03.2004
- 27.03.2004; in: "GAMM Annual Meeting Dresden 2004",
PAMM/ Wiley-VCH Verlag GmbH & Co.,
4
(2004),
2 S.
Zusätzliche Informationen
-
H. Renezeder, A. Steindl, H. Troger:
"On the dynamics of circulating monocable aerial ropeways";
Vortrag: GAMM 2005,
Luxembourg;
28.03.2005
- 01.04.2005; in: "Gamm Annual Meeting",
PAMM / Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim,
5
(2005),
2 S.
Zusätzliche Informationen
-
H. Renezeder, A. Steindl, H. Troger:
"Three-Dimensional Simulation of a Circulating Monocable Ropeway";
Vortrag: GAMM 2006,
Berlin;
27.03.2006
- 31.03.2006; in: "GAMM Annual Meeting 2006",
WILEY-VCH Verlag GmbH & Co. KGaA,
6
(2006),
2 S.
Zusätzliche Informationen
-
I. Riehle, H. Tokuno, M. Kaltenbacher:
"Identification of aeroacoustic noise sources in automotive industry by microphone array measurements";
Vortrag: DAGA 2015,
Nürnberg;
16.03.2015
- 19.03.2015; in: "41. Jahrestagung für Akustik",
(2015),
S. 224
- 227.
-
A. Riepl, P. Lugner, M. Plöchl:
"A skidding passeger car";
Vortrag: Proc. of 4th Mini Conf. on Vehicle System Dynamics, Identification and Anomalies,
Budapest;
07.11.1994
- 09.11.1994; in: "VSDIA 1994",
(1994),
S. 158
- 170.
-
D. Ritzberger, C. Hametner, S. Jakubek:
"Optimal Current Excitation for the Time-Domain Estimation of the Electrochemical Impedance";
Vortrag: IEEE Vehicle Power and Propulsion Conference 2019,
Hanoi, Vietnam;
14.10.2019
- 17.10.2019; in: "2019 IEEE Vehicle Power and Propulsion Conference",
(2019).
Zusätzliche Informationen
-
D. Ritzberger, S. Jakubek:
"Harmonic signal estimation in the time domain for on-line electrochemical impedance spectroscopy";
Vortrag: European Fuel Cell Conference & Exhibition,
Neapel;
12.12.2017
- 15.12.2017; in: "Proceedings of the 7th European fuel cell Piero Lunghi conference",
(2017),
ISBN: 978-88-8286-324-1;
S. 83
- 84.
Zusätzliche Informationen
-
D. Ritzberger, A. Schirrer, S. Jakubek:
"Formulating the perfectly matched layer as a control optimization problem";
Vortrag: Polish congress of mechanics - international conference on computer methods in mechanics (PCM-CMM),
Gdansk;
08.09.2015
- 11.09.2015; in: "Pcm-Cmm-2015 Congress Book Of Short Papers (volume 1 & Volume 2)",
(2015),
S. 61
- 62.
Zusätzliche Informationen
-
D. Ritzberger, A. Schirrer, S. Jakubek:
"Formulating the perfectly matched layer as a control optimization problem";
Hauptvortrag: VSS Vienna Young Scientists Symposium 2015,
Wien;
25.06.2015
- 26.06.2015; in: "VSS Vienna Young Scientists Symposium",
Book-of-abstracts.com,
(2015),
ISBN: 978-3-9504017-0-7;
S. 48
- 49.
-
D. Ritzberger, E. Talic, A. Schirrer:
"Efficient simulation of railway pantograph/ catenary interaction using pantograph-fixed coordinates";
Vortrag: MATHMOD 2015 - 8th Vienna International Conference on Mathematical Modelling,
Wien;
18.02.2015
- 20.02.2015; in: "8th Vienna International Conference on Mathematical Modelling MATHMOD 2015",
IFAC,
(2015),
S. 61
- 66.
Zusätzliche Informationen
-
K. Roppert, F. Toth, M. Kaltenbacher:
"Coupling Nonlinear Magneto-Thermal Problems in Frequency Domain with the Mechanical Field";
Vortrag: GAMM 2019 - 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics,
Universität Wien, Austria;
18.02.2019
- 22.02.2019; in: "PAMM",
Wiley,
(2019).
Zusätzliche Informationen
-
K. Roppert, F. Toth, M. Kaltenbacher:
"Modelling Nonlinear Steady State Induction Heating Processes";
Vortrag: COMPUMAG 2019,
Paris;
15.07.2019
- 19.07.2019; in: "22nd International Conference on the Computation of Electromagnetic Fields",
(2019).
Zusätzliche Informationen
-
K. Roppert, F. Toth, M. Kaltenbacher:
"Simulation of Sheet Metal Induction Heating Processes with Harmonic Balance FEM";
Vortrag: IGTE Symposium 2018,
Graz;
16.09.2018
- 19.09.2018; in: "COMPEL",
COMPEL,
(2018),
ISSN: 0332-1649.
Zusätzliche Informationen
-
H. Rossmanith:
"The Mechanics and Physics of Advanced Blasting - Waves, Shocks, Fracture, Damage, Impact, and Profit";
Vortrag: University Short Course,
Singapore (eingeladen);
11.09.2006
- 12.09.2006; in: "Protective Technology Research",
S. Nanyang Polytechnic University (Hrg.);
(2006),
S. 1
- 180.
-
H. Rossmanith:
"Understanding the Principles of Rock Breakage Using Precise Initiation Systems";
Vortrag: University Short Course,
Brisbane (Australien) (eingeladen);
18.09.2006
- 19.09.2006; in: "Understanding the Principles of Rock Breakage Using Precise Initiation Systems",
J. University of Queensland (Hrg.);
(2006),
S. 1
- 350.
-
H. Rossmanith, F. Loibnegger, H. Linsbauer, E. Fischmeister, P Mittermayr, A. Oberhauser:
"Surface Break-Outs and Related Rail Damage Development in the Vienna Mass Transit Metro System";
Vortrag: 12th International Conference on Fracture,
Ottawa;
12.07.2009
- 17.07.2009; in: "CD 12th International Conference on Fracture",
(2009),
10 S.
-
M. Rupp, F. Hausberg:
"LMS Algorithmic Variants in Active Noise and Vibration Control";
Vortrag: 22nd European Signal Processing Conference (EUSIPCO),
Lisboa;
01.09.2014
- 05.09.2014; in: "Proceedings of Eurasip Conference",
IEEE,
(2014),
S. 691
- 695.
Zusätzliche Informationen
-
G. Schandl:
"Simulation of an active vibration control for flexible railway car bodies";
Vortrag: 6th Simpack User Meeting,
Eisenach;
09.11.2004
- 10.11.2004; in: "6th Simpack User Meeting",
(2004).
-
J. Scheidl, Y. Vetyukov:
"Coulomb dry friction contact in a non-material shell finite element model for axially moving endless steel belts";
Vortrag: GAMM 2019 - 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics,
Universität Wien, Austria;
18.02.2019
- 22.02.2019; in: "PAMM",
Wiley,
(2019),
S. 1
- 2.
Zusätzliche Informationen
-
J. Scheidl, Y. Vetyukov, E. Oborin, M. Krommer, C. Schmidrathner:
"Mixed Eulerian-Lagrangian description in the statics of a flexible belt with tension and bending hanging on two pulleys";
Vortrag: 89th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM),
München, Germany;
19.03.2018
- 23.03.2018; in: "Special Issue: 89th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM)",
PAMM,
18(1)
(2018),
S. 1
- 2.
Zusätzliche Informationen
-
E. Schierer:
"Humanoid Robots for Human Life Support";
Vortrag: IFAC Conference on Supplemental Ways for Improving International Stability through Automation ISA'06,
Prishtina, Kosovo;
15.06.2006
- 17.06.2006; in: "Improving Stability in Developing Nations Through Automation 2006 - A Proceedings Volume from the IFAC Conference on Supplemental Ways for Improving International Stability through Automation ISA'06",
(2006),
ISBN: 9780080454061;
S. 101
- 105.
-
E. Schierer, M. Würzl:
"Humanoid Robots for Edutainment - IHRT";
Vortrag: Fira Robot World Congress 2003,
Messe Congress Center, Wien, Österreich;
01.10.2003
- 03.10.2003; in: "Proceedings of the 2nd Fira Robot Soccer World Congress Volume 2",
Messe Congress Center, Wien, Österreich
(2003),
ISBN: 3-902161-01-9;
S. 67
- 70.
-
R. Schimon, T. Henrion, S. Jakubek, A. Werner, M. Himmelbauer, M. Buchsbaum, K. Haider, M. Haider:
"Methoden zur Verbesserung der Energieeffizienz mittels dynamischer Simulation am Beispiel eines integrierten Hüttenwerks";
Vortrag: ASIM Treffen 2010,
Ulm;
04.03.2010
- 05.03.2010; in: "ASIM Treffen 2010 - Simulation technischer Systeme, Grundlagen und Methoden in Modellbildung und Simulation",
(2010),
ISBN: 978-3-9810998-3-6;
S. 103
- 113.
-
A. Schirrer, T. Hanis, M. Klauco, S. Thormann, M. Hromcik, S. Jakubek:
"Safety-extended Explicit MPC for Autonomous Truck Platooning on Varying Road Conditions";
Vortrag: 21st IFAC World Congress,
Berlin;
12.07.2020
- 17.07.2020; in: "Proceedings of the 21st IFAC World Congress",
(2020),
S. 1
- 6.
Zusätzliche Informationen
-
A. Schirrer, S. Jakubek:
"Optimization-based formulations of absorbing boundary conditions in discrete-time wave propagation problems";
Vortrag: 19. Steirisches Seminar über Regelungstechnik und Prozessautomatisierung,
Retzhof (eingeladen);
07.09.2015
- 09.09.2015; in: "19. Steirisches Seminar über Regelungstechnik und Prozessautomatisierung",
(2015).
Zusätzliche Informationen
-
A. Schirrer, O. König, S. Ghaemi, F. Kupzog, M. Kozek:
"Hierarchical application of model-predictive control for efficient integration of active buildings into low voltage grids";
Vortrag: IEEE Workshop on Modeling and Simulation of Cyber-Physical Energy Systems 2013,
Berkeley, CA, USA (eingeladen);
20.05.2013; in: "IEEE Workshop on Modeling and Simulation of Cyber-Physical Energy Systems 2013",
Berkeley, CA, USA
(2013),
S. 100
- 105.
Zusätzliche Informationen
-
A. Schirrer, M. Kozek:
"Assessment of Interpolation Methods for Linear-Dynamic Systems";
Vortrag: CSSim2011, 2nd International Conference on Computer Modelling and Simulation,
Brno, Czech Republic;
05.09.2011
- 07.09.2011; in: "Proceedings of the 2nd International Conference on Computer Modelling and Simulation-CSSim2011",
(2011),
ISBN: 9788021443204;
S. 137
- 145.
Zusätzliche Informationen
-
A. Schirrer, M. Kozek:
"Co-Simulation as Effective Method for Flexible Structure Vibration Control Design Validation and Optimization";
Vortrag: 16th Mediterranean Conference on Control and Automation, MED'08,
Ajaccio, Corsica, France;
25.06.2008
- 27.06.2008; in: "Proceedings of the 16th Mediterranean Conference on Control and Automation, MED'08",
(2008),
ISBN: 978-1-4244-2505-1;
Paper-Nr. 294,
6 S.
Zusätzliche Informationen
-
A. Schirrer, M. Kozek, W. Bacher:
"An industrial tool for identification and control of nonlinear valve characteristics";
Vortrag: 6th IFAC Symposium on Mechatronic Systems (IFAC MECH2013),
Hangzhou, China;
10.04.2013
- 12.04.2013; in: "Proceedings of the 6th IFAC Symposium on Mechatronic Systems",
(2013),
Paper-Nr. WeBT3-01,
9 S.
Zusätzliche Informationen
-
A. Schirrer, M. Kozek, C. Benatzky:
"Piezo stack actuators in flexible structures: Experimental verification of a nonlinear modeling and identification approach";
Vortrag: 6th EUROMECH Conference ENOC 2008,
Russia;
30.06.2008
- 04.07.2008; in: "Proceedings of the 6th EUROMECH Conference ENOC 2008",
(2008),
6 S.
Zusätzliche Informationen
-
A. Schirrer, M. Kozek, A. Plank, M. Neumann, S. Badshah, J. Wassermann:
"Vibration analysis of an actively controlled flexible structure using speckle interferometry";
Vortrag: ICSV15, 15th International Congress on Sound and Vibration,
Daejon, Korea;
06.07.2008
- 10.07.2008; in: "Proceedings of 15th International Congress on Sound and Vibration (ICSV15)",
(2008),
ISBN: 978-89-961284-1-0;
Paper-Nr. SS0607,
8 S.
Zusätzliche Informationen
-
A. Schirrer, J. Mayrhofer, S. Jakubek:
"Accurate piecewise-affine time-discrete modeling of hysteresis-coupled system dynamics";
Vortrag: 18th IFAC Symposium on System Identification SYSID 2018,
Stockholm, Schweden;
09.07.2018
- 11.07.2018; in: "18th IFAC Symposium on System Identification SYSID 2018",
IFAC-PapersOnLine, Elsevier,
51 (15)
(2018),
6 S.
Zusätzliche Informationen
-
A. Schirrer, J. Mayrhofer, D. Ritzberger:
"Efficient piecewise-affine coupled-system feed-forward control of a nonlinear elastomer coupling";
Vortrag: MATHMOD 2018 - 9th Vienna International Conference on Mathematical Modelling,
Wien, Österreich;
21.02.2018
- 23.02.2018; in: "9th Vienna International Conference on Mathematical Modelling",
IFAC-PapersOnLine, Elsevier,
51 (2)
(2018),
6 S.
Zusätzliche Informationen
-
A. Schirrer, E. Talic, M. Kozek:
"A Flexible MATLAB-based Simulation Framework for Dynamic Catenary-Pantograph Interaction and Co-Simulation";
Vortrag: 8th EUROSIM Congress on Modelling and Simulation 2013,
Cardiff, Wales, UK;
10.09.2013
- 13.09.2013; in: "2013 8th EUROSIM Congress on Modelling and Simulation",
(2013),
ISBN: 978-0-7695-5073-2;
S. 288
- 293.
Zusätzliche Informationen
-
A. Schirrer, C. Westermayer, M. Hemedi, M. Kozek:
"A Comprehensive Robust Control Design and Optimization Methodology for Complex Flexible-Structure Systems";
Vortrag: 18th Mediterranean Conference on Control & Automation,
Marrakesch, Marokko;
23.06.2010
- 25.06.2010; in: "Control and Automation, 2010. MED '10. 18th Mediterranean Conference on",
(2010),
ISBN: 978-1-4244-8092-0;
Paper-Nr. ThC2.4,
6 S.
Zusätzliche Informationen
-
A. Schirrer, C. Westermayer, M. Hemedi, M. Kozek:
"LQ-based design of the inner loop lateral control for a large flexible BWB-type aircraft";
Vortrag: 2010 IEEE Multi-Conference on Systems and Control,
A port city on Tokyo Bay, Yokohama, Kanagawa, JAPAN;
08.09.2010
- 10.09.2010; in: "2010 IEEE International Conference on Control Applications; Part of 2010 IEEE Multi-Conference on Systems and Control",
Ieee Cca,
CFP10CCA-CDR
(2010),
ISBN: 978-1-4244-5363-4;
6 S.
Zusätzliche Informationen
-
A. Schirrer, C. Westermayer, M. Hemedi, M. Kozek:
"Multi-model convex design of a scheduled lateral feedforward control law for a large flexible BWB aircraft";
Poster: 18th IFAC World Congress,
Milan;
28.08.2011
- 02.09.2011; in: "Proceedings of the 18th IFAC World Congress, 2011",
18th IFAC World Congress / Volume# 18 / Part# 1
(2011),
ISBN: 978-3-902661-93-7;
S. 2126
- 2131.
Zusätzliche Informationen
-
A. Schirrer, C. Westermayer, M. Hemedi, M. Kozek:
"Robust convex lateral feedback control synthesis for a BWB aircraft";
Vortrag: 18th IFAC World Congress,
Milano, Italy;
28.08.2011
- 02.09.2011; in: "Proceedings of the 18th IFAC World Congress",
18th IFAC World Congress / Volume# 18 / Part# 1
(2011),
ISBN: 978-3-902661-93-7;
Paper-Nr. 1543,
6 S.
Zusätzliche Informationen
-
A. Schirrer, C. Westermayer, M. Hemedi, M. Kozek:
"Robust feedback lateral control using a parameterized LFR model and DGK-iteration";
Vortrag: 4th European Conference for Aerospace Sciences (EUCASS),
St. Petersburg (eingeladen);
04.07.2011
- 08.07.2011; in: "Proceedings of the 4th European Conference for Aerospace Sciences (EUCASS)",
(2011),
Paper-Nr. 652,
11 S.
Zusätzliche Informationen
-
A. Schirrer, C. Westermayer, M. Hemedi, M. Kozek:
"Robust H-infinity Control Design Parameter Optimization via Genetic Algorithm for Lateral Control of a BWB type Aircraft";
Vortrag: IFAC Workshop on Intelligent Control Systems WICS2010,
Sinaia, Romania;
29.09.2010
- 02.10.2010; in: "Proceedings of the WICS 2010",
IFAC PapersOnline,
(2010),
Paper-Nr. W-10-014,
7 S.
Zusätzliche Informationen
-
C. Schmidrathner:
"Validation of Bredt's formulas by the method of asymptotic splitting";
Vortrag: 89th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM),
München, Germany;
19.03.2018
- 23.03.2018; in: "Special Issue: 89th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM)",
PAMM,
18(1)
(2018),
S. 1
- 2.
Zusätzliche Informationen
-
C. Schmidrathner, Y. Vetyukov:
"Non-material finite element rod model for out-of-plane bending of an elastic strip with natural curvature";
Vortrag: GAMM 2019 - 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics,
Universität Wien, Austria;
18.02.2019
- 22.02.2019; in: "PAMM",
Wiley,
(2019),
S. 1
- 2.
Zusätzliche Informationen
-
E. Schmidt, H. Ecker:
"Prototype Design and Experimental Verification of an Electromagnetic Actuator for Parametric Stiffness Excitation";
Vortrag: IEEE Canadian Conference on Electrical and Computer Engineering (CCECE),
Calgary, Alberta, Canada;
02.05.2010
- 05.05.2010; in: "Proceedings of the IEEE Canadian Conference on Electrical and Computer Engineering (CCECE)",
(2010),
ISBN: 978-1-4244-5376-4;
S. 1
- 5.
Zusätzliche Informationen
-
E. Schmidt, M. Kaltenbacher, A. Wolfschluckner:
"Eddy Current Losses in Permanent Magnets of Permanent Magnet Synchronous Machines - Analytical Calculation Methods and High Order Finite Element Analyses";
Vortrag: IEEE Canadian Conference on Electrical and Computer Engineering (CCECE),
Toronto, ON, Canada;
04.05.2014
- 07.05.2014; in: "Proceedings of the IEEE Canadian Conference on Electrical and Computer Engineering (CCECE)",
(2014),
ISBN: 978-1-4799-3099-9;
S. 1
- 5.
Zusätzliche Informationen
-
E. Schmidt, M. Kaltenbacher, A. Wolfschluckner:
"High Order Hierarchic Finite Elements and Their Application on Eddy Current Losses in Permanent Magnets of Synchronous Machines";
Vortrag: International Symposium on Numerical Field Calculation in Electrical Engineering (IGTE),
Graz, Österreich;
14.09.2014
- 17.09.2014; in: "Proceedings of the 16th International IGTE Symposium on Numerical Field Calculation Graz (Austria)",
(2014),
S. 1
- 6.
Zusätzliche Informationen
-
E. Schmidt, W. Paradeiser, F. Dohnal, H. Ecker:
"Design of an Electromagnetic Actuator for Parametric Excitation Realization";
Vortrag: The 12th International IGTE Symposium on Numerical Field Calculation in Electrical Engineering,
Graz, A;
18.09.2006
- 20.09.2006; in: "Proceedings of the 12th International IGTE Symposium on Numerical Field Calculation",
(2006),
ISBN: 978-3-902465-56-6;
S. 336
- 341.
Zusätzliche Informationen
-
H. Schmiedmayer, H. Ecker:
"Tilt-over risks with tricycles";
Vortrag: ITAI-EVU Conference,
Hinckley, UK;
25.09.2009
- 27.09.2009; in: "Proc. of the 1st joint ITAI-EVU Conference",
(2009),
S. 169
- 181.
-
H. Schmiedmayer, P. Lugner, P. Brugger, F. Bruck:
"Using Multi-Body-Simulation to Understand and Optimise technical Design in Biomechanical Applications";
Poster: BioNet Event,
Brussels;
27.04.2002
- 29.04.2002; in: "Biomechanics in the Decade of the Bone & Joint",
(2002),
S. 41
- 42.
-
S. Schoder, S. Falk, M. Döllinger, M. Kaltenbacher:
"Hybrid Aeroacoustic Approach for the efficient numerical simulation of human phonation";
Vortrag: AQL 2019 - The 13th International Conference on Advances in Quantitative Laryngology, Voice and Speech Research,
Montreal (eingeladen);
02.06.2019
- 04.06.2019; in: "The 13th International Conference on Advances in Quantitative Laryngology, Voice and Speech Research",
(2019).
-
S. Schoder, M. Kaltenbacher:
"Aeroacoustic source term filtering based on Helmholtz decomposition";
Vortrag: 23rd AIAA/CEAS Aeroacoustics conference,
Denver;
05.06.2017
- 09.06.2017; in: "23rd AIAA/CEAS Aeroacoustics Conference",
(2017),
ISBN: 978-1-62410-504-3;
7 S.
-
S. Schoder, M. Kaltenbacher:
"Helmholtz-Hodge decomposition of compressible flow data on homologically trivial domains";
Vortrag: ICTCA 2017,
Wien;
30.07.2017
- 03.08.2017; in: "ICTCA 2017",
(2017),
ISBN: 978-3-200-05210-9;
S. 147.
-
S. Schoder, M. Kaltenbacher:
"Interpolation Technique for Computational Aeroacoustics and Vibroacoustics";
Vortrag: DAGA München 2018,
München;
19.03.2018
- 22.03.2018; in: "DAGA München 2018",
S. Schoder, M. Kaltenbacher (Hrg.);
(2018),
S. 489
- 492.
-
S. Schoder, F. Krömer (geb. Zenger), M. Weitz, M. Kaltenbacher, S. Becker:
"Computational Aeroacoustics of an axial fan with leading edge serrations";
Vortrag: 23rd International Congress on Acoustics,
Aachen (eingeladen);
09.09.2019
- 13.09.2019; in: "23rd International Congress on Acoustics",
(2019).
-
S. Schoder, F. Toth, M. Kaltenbacher:
"Hybrid computational aeroacoustics based on compressible flow data at low Mach numbers";
Vortrag: GAMM 2017 - 88th Annual Meeting of the International Association of Applied Mathematics and Mechanics,
Weimar/DE;
06.03.2017
- 10.03.2017; in: "Proceedings of the annual GAMM meeting",
Proceedings in Applied Mathematics and Mechanics (PAMM) / Wiley-VCH,
(2017),
ISSN: 1617-7061.
-
K Schulmeister, M. Kozek:
"Modeling of Lateral Dynamics for an Endless Steel Belt";
Vortrag: 12th International Conference on the Enhancement and Promotion of Computational Methods in Engineering and Science,
Hong Kong and Macao;
30.11.2009
- 03.12.2009; in: "Proceedings of the Twelfth International Conference on the Enhancement and Promotion of Computational Methods in Engineering and Science",
(2009),
Paper-Nr. ISCM2-553,
6 S.
Zusätzliche Informationen
-
K Schulmeister, M. Kozek:
"Modelling of lateral dynamics for an endless metal process belt";
Vortrag: 6th Vienna Mathmod 09,
Vienna;
11.02.2009
- 13.02.2009; in: "Proceedings of the 6th Mathmod Vienna 09",
Argesim Report,
No. 35
(2009),
ISBN: 978-3-901608-35-3;
Paper-Nr. 267,
9 S.
Zusätzliche Informationen
-
K Schulmeister, M. Kozek, H. Jörgl:
"Modelling and analysis of a wire drawing machine";
Vortrag: 2008 International Simulation Multi-conference,
Edinburgh, Scotland;
16.06.2008
- 19.06.2008; in: "2008 International Simulation Multi-conference",
(2008),
ISBN: 1-56555-320-9;
8 S.
Zusätzliche Informationen
-
A. Schulz:
"A hot-swap controller amplifier module for active magnetic bearings with supreme reliability - electronic circuitry and error detection strategies";
Vortrag: 20th International Symposium on Power Electronics, Electrical Drives, Automation and Motion - Speedam 2010,
Pisa;
14.06.2010
- 16.06.2010; in: "20th International Symposium on Power Electronics, Electrical Drives, Automation and Motion - Speedam 2010",
(2010).
-
A. Schulz:
"Hocheffiziente Schwungradspeicher (Flywheels)";
Vortrag: Science Brunch 09/2013,
Wien (eingeladen);
03.09.2013; in: "cache2 strom+wärme",
Klima- und Energiefonds (Hrg.);
(2013),
S. 14
- 19.
-
A. Schulz:
"Simulation eines ausfallsicheren aktiven Magnetlagers";
Vortrag: 8.Internationalen Tagung "Schwingungen in rotierenden Maschinen" SIRM 2009,
Wien;
23.02.2011
- 25.02.2011; in: "Tagungsbeiträge der 8.Internationalen Tagung "Schwingungen in rotierenden Maschinen"",
H. Irretier, R. Nordmann, H. Springer, H. Ecker (Hrg.);
Technische Univ. Darmstadt,
(2011),
ISBN: 978-3-200-01412-1;
11 S.
-
A. Schulz, B. Gross, M. Neumann, J. Wassermann:
"A sophisticated active magnetic bearing system with supreme reliability";
Vortrag: The Eleventh International Symposium on Magnetic Bearings (ISMB 11),
Nara, Japan;
26.08.2008
- 29.08.2008; in: "Proceedings of ISMB 11",
K. Nonami, T. Mizuno, M. Komori (Hrg.);
(2008),
Paper-Nr. 333,
7 S.
Zusätzliche Informationen
-
A. Schulz, M. Neumann, J. Wassermann:
"A sophisticated concept for supreme AMB reliability";
Vortrag: 9th International Conference on Motion and Vibration Control,
Munich;
15.09.2008
- 18.09.2008; in: "Proceedings-CD MOVIC 2008",
(2008),
Paper-Nr. 1157,
10 S.
Zusätzliche Informationen
-
A. Schulz, M. Neumann, J. Wassermann:
"Modeling and Simulation of a Hot-Swap Controller Amplifier Module for an Active Magnetic Bearing with Supreme Reliability";
Vortrag: 9th International Conference on Modeling and Simulation of Electric Machines, Converters and Systems (ELECTRIMACS 2008),
Quebec, Canada;
08.06.2008
- 11.06.2008; in: "Proceedings ELECTRIMACS 2008",
(2008),
5 S.
Zusätzliche Informationen
-
A. Schulz, I Rottensteiner, M. Neumann, M. Wehse, J. Wassermann:
"Self-Sensing versus Reference Air Gaps";
Vortrag: International Conference on Electrical and Electronics Engineering, ICEEE,
Venedig;
24.11.2010
- 26.11.2010; in: "Waset 2010 Venice",
4/11
(2010),
ISSN: 1307-6892;
S. 85
- 93.
Zusätzliche Informationen
-
A. Schulz, M. Schneeberger, J. Wassermann:
"A Reliability Analysis of Switching Amplifier Concepts for Active Magnetic Bearings";
Vortrag: IEEE International Conference on Industrial Technology (ICIT 2006),
Mumbai;
15.12.2006
- 17.12.2006; in: "Proceedings of ICIT2006",
(2006),
ISBN: 1-4244-0726-5;
6 S.
Zusätzliche Informationen
-
A. Schulz, M. Schneeberger, J. Wassermann:
"A Reliable Switching Amplifier driving an Active Magnetic Bearing - Experimental Results";
Vortrag: IEEE International Conference on Industrial Technology (ICIT2005),
Hong Kong;
14.12.2005
- 17.12.2005; in: "Proc. of 2005 IEEE Int. Conf. on Industrial Technology",
(2005),
ISBN: 0-7803-9484-4;
6 S.
Zusätzliche Informationen
-
A. Schulz, M. Schneeberger, J. Wassermann:
"A Reliable Switching Amplifier for Active Magnetic Bearings Error Detection Strategies and Measurement Results";
Vortrag: 2004 IEEE International Conference on Industrial Technology (ICIT 04),
Hammamet, Tunisia;
08.12.2004
- 10.12.2004; in: "Proceedings of the IEEE-ICIT 2004",
(2004),
ISBN: 0-7803-8663-9;
Paper-Nr. TF-004330,
7 S.
-
A. Schulz, M. Schneeberger, J. Wassermann:
"Entwicklung eines aktiven Magnetlagers mit hoher Betriebssicherheit";
Vortrag: SIRM-Workshop - Mechatronik in der Rotordynamik,
Kassel;
01.03.2007
- 02.03.2007; in: "Schwingungen in rotierenden Maschinen",
(2007),
25 S.
Zusätzliche Informationen
-
A. Schulz, M. Schneeberger, J. Wassermann:
"Schaltverstärker hoher Betriebssicherheit für Magnetlager - Fehlererkennungsstrategien und Messergebnisse";
Vortrag: VDI-Tagung Mechatronik 2005,
Wiesloch;
01.06.2005
- 02.06.2005; in: "Mechatronik 2005 Innovative Produktentwicklung",
VDI Verlag GmbH,
VDI-Berichte 1892.2
(2005),
ISBN: 3-18-091892-6;
S. 1033
- 1047.
-
A. Schulz, M. Schneeberger, J. Wassermann:
"Schaltverstärker hoher Betriebssicherheit für Magnetlager - Prototyp und "Crash-Test"";
Vortrag: 7.Workshop Mechatronische Systeme,
Zittau - Kassel;
29.09.2005
- 30.09.2005; in: "Tagungsband 7.Workshop Mechatronische Systeme",
Hochschule Zittau/Görlitz,
Wissenschaftliche Berichte Heft 85, Nr. 2132-2146
(2005),
S. 29
- 40.
-
A. Schulz, H. Sima, T. Hinterdorfer:
"Hocheffizienter Konverter für Magnetlager und geschaltete Reluktanzmotoren";
Vortrag: SPS/IPC/DRIVES 2011,
Nürnberg;
22.11.2011
- 24.11.2011; in: "SPS/IPC/DRIVES 2011",
K. Bender, W. Schumacher (Hrg.);
(2011),
ISBN: 978-3-8007-3379-8;
S. 253
- 262.
-
A. Schulz, J. Wassermann, M. Schneeberger:
"A Reliable Switching Amplifier for Active Magnetic Bearings";
Vortrag: IEEE International Conference on Industrial Technology (ICIT) 2003,
Maribor, Slovenia;
10.12.2003
- 12.12.2003; in: "Proceedings Int. Conf. on Industrial Technology",
(2003),
ISBN: 0-7803-7853-9;
S. 198
- 202.
-
A. Schulz, J. Wassermann, M. Schneeberger:
"Schaltverstärker für betriebssichere Magnetlager";
Vortrag: 6.Workshop Mechatronische Systeme,
Kassel, Deutschland;
25.09.2003
- 26.09.2003; in: "Tagungsband 2003 6.Workshop Mechatronische Systeme",
(2003),
S. 45
- 53.
-
A. Schuster, M. Kozek:
"Constrained Model Predictive Control Implementation in an Industrial Drying Process";
Vortrag: 7th IEEE International Conference on Computational Cybernetics,
Palma de Mallorca, Spain;
26.11.2009
- 29.11.2009; in: "7th IEEE International Conference on Computational Cybernetics",
IEEE,
(2009),
ISBN: 978-1-4244-5311-5;
Paper-Nr. 28,
6 S.
Zusätzliche Informationen
-
A. Schuster, M. Kozek, B. Voglauer, A. Voigt:
"Constrained Model Predictive Control of an Industrial Drying Process for Viscose Staple Fibres";
Vortrag: 2010 ASME Dynamic Systems and Control Conference,
Cambridge, Massachusetts, USA;
13.09.2010
- 15.09.2010; in: "Proceedings of the 2010 ASME Dynamic Systems and Control Conference",
(2010),
Paper-Nr. 4206,
8 S.
Zusätzliche Informationen
-
A. Schuster, M. Kozek, B. Voglauer, A. Voigt:
"Modelling of a Viscose-fiber drying process";
Vortrag: 6th Vienna Mathmod 09,
Vienna;
11.02.2009
- 13.02.2009; in: "Proceedings of the 6th Mathmod Vienna 09",
Argesim Report,
No. 35
(2009),
ISBN: 978-3-901608-35-3;
Paper-Nr. 225,
7 S.
Zusätzliche Informationen
-
M. Schwarzbart, A. Steindl, H. Troger:
"Buckling of Carbon Nanotubes: a Molecular Static Approach";
Vortrag: GAMM 2010 - 81st Annual Meeting of the International Association of Applied Mathematics and Mechanics,
Karlsruhe;
22.03.2010
- 26.03.2010; in: "GAMM Annual Meeting - Karlsruhe 2010",
C. Wieners (Hrg.);
PAMM,
10/1
(2010),
4 S.
Zusätzliche Informationen
-
M. Schwarzbart, A. Steindl, H. Troger:
"Molecular statical calculation of graphene sheet buckling";
Vortrag: GAMM 2008,
Bremen;
31.03.2008
- 04.04.2008; in: "79th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Bremen 2008",
Wiley-VCH,
Volume 8; Issue 1
(2008),
S. 10343
- 10344.
Zusätzliche Informationen
-
M. Schwarzbart, A. Steindl, H. Troger:
"On stability problems of the space elevator";
Vortrag: GAMM 2007,
Zürich;
16.07.2007
- 20.07.2007; in: "Sixth International Congress on Industrial Applied Mathematics (ICIAM07) and GAMM Annual Meeting, Zürich 2007",
R. Jeltsch (Hrg.);
PAMM/Wiley-VCH,
(2007),
2 S.
Zusätzliche Informationen
-
K Schwieger, H. Ecker, A. Hula, M. Neumann:
"Identification of patterns in motorcycle riding dynamics at known accident sites";
Vortrag: TRA 2020 - 8th Transport Research Arena,
Helsinki;
27.04.2020
- 30.04.2020; in: "Web-Proceedings of 8th Transport Research Arena TRA 2020",
(2020),
Paper-Nr. ID 512,
11 S.
Zusätzliche Informationen
-
K Schwieger, A. Hula, P Saleh, H. Ecker, M. Neumann:
"Avoiding Motorcycle Accidents by Motorcycle Risk Mapping";
Vortrag: Online-IFZ-Konferenz 13th International Motorcycle Conference,
Deutschland;
01.09.2020; in: "Web-Proceedings of 13th International Motorcycle Conference",
(2020),
8 S.
Zusätzliche Informationen
-
Chr. Schyr, S. Jakubek, G. Stempfer:
"A New Method of Coupling HiL-Simulation and Engine Testing Based on AUTOSAR-Compliant Control Units";
Vortrag: SAE world congress 2009,
Detroit, Michigan, USA;
20.04.2009
- 23.04.2009; in: "SAE paper",
(2009),
Paper-Nr. 2009-01-1521,
6 S.
Zusätzliche Informationen
-
P. Seebacher, M. Kaltenbacher, F. Wein, H. Lehmann, V. Jörgl:
"Topology-optimization of an actuator in motion";
Vortrag: The 19th International IGTE Symposium on Numerical Field Calculation in Electrical Engineering,
Graz;
20.09.2020
- 23.09.2020; in: "The 19th International IGTE Symposium on Numerical Field Calculation in Electrical Engineering",
(2020),
S. 5.
Zusätzliche Informationen
-
M Seyr, S. Jakubek:
"Dynamic trajectory generation via numerical multi-objective optimisation";
Vortrag: American Control Conference 2007,
New York City, USA;
11.07.2007
- 13.07.2007; in: "Proceedings of the 2007 American Control Conference",
(2007),
ISBN: 1-4244-0989-6;
Paper-Nr. ThB16.4,
6 S.
Zusätzliche Informationen
-
M Seyr, S. Jakubek:
"Mobile Robot Predictive Trajectory Tracking";
Vortrag: ICINCO 2005 (2nd internat. Conference on Informatics in Control, Automation and Robotics),
Barcelona;
14.09.2005
- 17.09.2005; in: "Proceedings of the 2005 ICINCO",
INSTICC,
(2005),
ISBN: 972-8865-30-9;
S. 112
- 119.
Zusätzliche Informationen
-
M Seyr, S. Jakubek:
"Proprioceptive Navigation, Slip Estimation and Slip Control for Autonomous Wheeled Mobile Robots";
Vortrag: 2nd IEEE International Conference on Robotics, Automation & Mechatronics,
Bangkok, Thailand;
07.06.2006
- 09.06.2006; in: "2nd IEEE International Conference on Robotics, Automation & Mechatronics",
IEEE,
(2006),
ISBN: 1-4244-0025-2;
Paper-Nr. P0251,
6 S.
Zusätzliche Informationen
-
M Seyr, S. Jakubek, G. Novak:
"Neural Network Predictive Trajectory Tracking of an Autonomous Two-Wheeled Mobile Robot";
Poster: 16th IFAC World Congress,
Prag;
03.07.2005
- 08.07.2005; in: "Proceedings of the 16th IFAC World Congress",
Elsevier,
(2005).
Zusätzliche Informationen
-
P. Sidlof, S. Zörner, A. Hüppe:
"Numerical simulation of flow-induced sound in human voice production";
Vortrag: Parallel Computational Fluid Dynamics,
Changsha, Hunan, China;
20.05.2013
- 24.05.2013; in: "Procedia Engineering",
Procedia Engineering / Elsevier Ltd.,
61 / 0
(2013),
ISSN: 1877-7058;
S. 333
- 340.
Zusätzliche Informationen
-
S. Sieberer, T. Kuba, P. Lugner, M. Plöchl:
"Dynamisches Verhalten eines Losradfahrwerks im Straßenbahnzugsverband";
Vortrag: 11. Internationale Schienenfahrzeugtagung,
Dresden;
23.02.2011
- 25.02.2011; in: "11. Internationale Schienenfahrzeugtagung",
(2011),
S. 70
- 72.
-
L. Silberbauer:
"A new 6 wheeled Robot for Humanitarian Demining";
Poster: International Workshop on robotics for Risky Interventions and Surveillance of the Environment,
Benicàssim, Spanien;
07.01.2008
- 08.01.2008; in: "Robotics for Risky Interventions and Surveillance of the Environment",
J. Penders, Y. Baudoin, E. Cervera, R. Marín (Hrg.);
(2008),
ISBN: 978-84-8021-645-6.
-
I. Sim, M. Kaltenbacher:
"Stable Absorbing Layer for Convective Wave Equation";
Vortrag: 18th AIAA 2912,
Passadena, Calofornia;
04.06.2012
- 06.06.2012; in: "18th AIAA 2912",
(2012).
-
H. Sima, A. Schulz, T. Hinterdorfer:
"Hocheffizientes Axial-Hybridmagnetlager für schnelldrehende Maschinen";
Vortrag: SPS/IPC/DRIVES 2011,
Nürnberg;
22.11.2011
- 24.11.2011; in: "Elektrische Automatisierung - Systeme und Komponenten, Fachmesse & Kongress",
K. Bender, W. Schumacher (Hrg.);
(2011),
ISBN: 978-3-8007-3379-8;
S. 271
- 280.
-
P. Skorjanz, A. Fahringer, H. Jörgl:
"Handling Large Power Reductions for Turbocharged Gas Engine Cogeneration-Units";
Vortrag: IFAC Symposium on Power Plants & Power Systems Control 2003,
Seoul, Korea;
15.09.2003
- 19.09.2003; in: "Proceedings of the IFAC Symposium on Power Plants & Power Systems Control 2003",
(2003),
5 S.
Zusätzliche Informationen
-
M. Spiegel, T. Strasser:
"Experiences with Meteorological Models for Asset Scheduling in Local Energy Communities and Microgrids";
Vortrag: 3rd CIGRE SEERC Conference Vienna 2021 (CIGRE SEERC Vienna 2021),
Vienna, Austria (online);
30.11.2021; in: "Proceedings of the 3rd CIGRE SEERC Conference Vienna 2021 (CIGRE SEERC Vienna 2021)",
CIGRE,
(2021),
S. 1
- 10.
Zusätzliche Informationen
-
H. Springer, H. Ecker, H. Haselbacher:
"A Numerical Case Study of Bearing Failure Mechanisms in Turbomachinery";
Vortrag: ASME Cogen Turbo Power'95,
Vienna, Austria;
23.08.1995
- 25.08.1995; in: "ASME Paper 95-CTP-015",
(1995).
-
M. Stadlbauer, C. Hametner, Maxime Deregnaucourt, S. Jakubek, T. Winsel:
"Online Measuring Method Using an Evolving Model Based Test Design for Optimal Process Stimulation and Modelling";
Vortrag: 2012 IEEE International Instrumentation and Measurement Technology Conference,
Graz;
13.05.2012
- 16.05.2012; in: "Proceedings of 2012 IEEE International Instrumentation and Measurement Technology Conference",
(2012),
6 S.
Zusätzliche Informationen
-
M. Stadlbauer, C. Hametner, S. Jakubek:
"Analytic model based design of experiments for nonlinear dynamic systems with constraints";
Vortrag: 13th IASTED International Conference Control and Applications (CA 2011),
Vancouver, Canada;
01.06.2011
- 03.06.2011; in: "Proceedings of the IASTED International Conference Control and Applications (CA 2011)",
C. de Silva (Hrg.);
ACTA Press,
paper Nr. 729-050
(2011),
S. 20
- 27.
Zusätzliche Informationen
-
M. Stadlbauer, C. Hametner, S. Jakubek, T. Winsel:
"Analytic Model Based Design of Experiments";
Vortrag: Design of Experiments (DoE) in Engine Developement,
Berlin;
23.05.2011
- 24.05.2011; in: "Design of Experiments (DoE) in Engine Developements",
(2011),
ISBN: 978-3-8169-3074-7;
S. 13
- 23.
Zusätzliche Informationen
-
M. Stadlbauer, C. Hametner, S. Jakubek, T. Winsel:
"Analytic Multilayer Perceptron based Experiment Design for Nonlinear Systems";
Poster: 18th IFAC World Congress,
Milan;
28.08.2011
- 02.09.2011; in: "Proceedings of the 18th IFAC World Congress, 2011",
18th IFAC World Congress / Volume# 18 / Part# 1
(2011),
ISBN: 978-3-902661-93-7;
S. 4332
- 4337.
Zusätzliche Informationen
-
A. Steindl:
"1:3-Resonance in a Hopf-Hopf bifurcation";
Vortrag: 86th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM),
Lecce;
23.03.2015
- 27.03.2015; in: "86th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM)",
G. Zavarise et al. (Hrg.);
PAMM/WILEY-VCH Verlag GmbH & Co,
15/1/Weinheim
(2015),
ISSN: 1617-7061;
S. 265
- 266.
Zusätzliche Informationen
-
A. Steindl:
"Application of Dimension Reduction Methods to the Dynamics of a Fluid Conveing Tube";
Vortrag: Fifth EUROMECH Nonlinear Dynamics Conference,
Eindhoven;
07.08.2005
- 12.08.2005; in: "Proceedings ENOC-2005",
D. H. van Campen, M.D. Lazurko, W.P.J.M. van den Oever (Hrg.);
(2005),
ISBN: 90-386-2667-3;
Paper-Nr. 06-443,
8 S.
Zusätzliche Informationen
-
A. Steindl:
"Application of Dimension Reduction Methods to the Dynamics of a Fluid Conveying Tube";
Vortrag: 8th World Congress on Computational Mechanics (WCCM8) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008),
Lido di Venezia;
30.06.2008
- 04.07.2008; in: "5th European Concress on Computational Methods in Applied Sciences and Engineering",
B. Schrefler, U. Perego (Hrg.);
(2008),
2 S.
Zusätzliche Informationen
-
A. Steindl:
"Bifurcations of Stick-Slip-Separation Waves in a Brake-like System";
Vortrag: GAMM 2006,
Berlin;
27.03.2006
- 31.03.2006; in: "GAMM Annual Meeting - Berlin 2006",
WILEY-VCH Verlag GmbH & Co. KGaA,
6
(2006),
2 S.
Zusätzliche Informationen
-
A. Steindl:
"Detecting the Shilnikov scenario in a Hopf-Hopf bifurcation with 1:3 resonance";
Vortrag: IUTAM Symposium Analytical Methods in Nonlinear Dynamics,
Frankfurt am Main;
06.07.2015
- 09.07.2015; in: "IUTAM Symposium Analytical Methods in Nonlinear Dynamics",
P. Hagedorn et al. (Hrg.);
Procedia IUTAM/Elsevier,
(2015),
ISSN: 2210-9838;
S. 1
- 8.
Zusätzliche Informationen
-
A. Steindl:
"Flutter instability of a visco-elastic belt drive";
Vortrag: 9th European Nonlinear Dynamics Conference (ENOC 2017),
Budapest;
25.06.2017
- 30.06.2017; in: "Proceedings of the 9th European Nonlinear Dynamics Conference",
G. Stépán, G. Csernák (Hrg.);
Congressline Ltd., Budapest,
(2017),
ISBN: 978-963-12-9168-1;
Paper-Nr. 272,
2 S.
Zusätzliche Informationen
-
A. Steindl:
"Hopf bifurcations of travelling waves in a brake-like system";
Vortrag: 6th International Congress on Industrial and Applied Mathematics (ICIAM) 2007,
Zürich;
15.07.2007
- 22.07.2007; in: "GAMM Annual Meeting 2007 - Zürich",
PAMM,
(2007),
S. 4050025
- 4050026.
Zusätzliche Informationen
-
A. Steindl:
"Hopf-Takens-Bogdanov interaction for a fluid-conveying tube";
Vortrag: GAMM 2016,
Braunschweig/DE;
07.03.2016
- 11.03.2016; in: "Proceedings of the annual GAMM meeting",
Proceedings in Applied Mathematics and Mechanics (PAMM) / Wiley-VCH,
(2016),
ISSN: 1617-7061;
S. 293
- 294.
Zusätzliche Informationen
-
A. Steindl:
"Numerical Investigation of the Hopf-Bogdanov-Takens Mode Interaction for a Fluid-conveying Tube";
Vortrag: 10th International Conference on Structural Dynamics, EURODYN 2017,
Rom;
10.09.2017
- 13.09.2017; in: "X International Conference on Structural Dynamics, EURODYN 2017",
F Vestroni, V. Gattulli, F Romeo (Hrg.);
Procedia Engineering / Elsevier,
199
(2017),
ISSN: 1877-7058;
S. 857
- 862.
Zusätzliche Informationen
-
A. Steindl:
"Optimal control of the deployment and retrieval of a tethered satellite under small disturbances";
Vortrag: Euromech Colloquium 541 "New Advances in the Nonlinear Dynamics and Control of Composites for Smart Engineering Design",
Senigallia;
03.06.2013
- 06.06.2013; in: "New Advances in the Nonlinear Dynamics and Control of Composites for Smart Engineering Design",
S. Lenci, J. Warminski (Hrg.);
(2013),
1 S.
Zusätzliche Informationen
-
A. Steindl:
"Orbital Stability of Skyhooks";
Vortrag: GAMM 2003,
Padova, Italia;
24.03.2003
- 28.03.2003; in: "Proc. Appl. Math. Mech.",
(2003),
ISSN: 1617-7061;
S. 126
- 127.
-
A. Steindl:
"Oscillations of a visco-elastic belt drive";
Vortrag: GAMM 2017 - 88th Annual Meeting of the International Association of Applied Mathematics and Mechanics,
Weimar/DE;
06.03.2017
- 10.03.2017; in: "PAMM",
GAMM (Hrg.);
Proceedings in Applied Mathematics and Mechanics (PAMM) / Wiley-VCH,
(2017),
ISSN: 1617-7061;
2 S.
Zusätzliche Informationen
-
A. Steindl:
"Oscillations of a visco-elastic belt drive";
Vortrag: 89th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM),
München, Germany;
19.03.2018
- 23.03.2018; in: "GAMM Annual Meeting - München 2018",
GAMM (Hrg.);
PAMM,
Volume 18/Issue 1
(2018),
S. 1
- 2.
Zusätzliche Informationen
-
A. Steindl:
"Stability and bifurcations of rotating stick-slip-separation waves";
Vortrag: 6th European Solid Mechanics Conference ESMC 6,
Budapest;
28.08.2006
- 01.09.2006; in: "6th European Solid Mechanics Conference",
G. Stépán (Hrg.);
(2006).
Zusätzliche Informationen
-
A. Steindl:
"Stability calculation of travelling waves in a simplified brake model";
Hauptvortrag: GAMM 2008,
Bremen;
31.03.2008
- 04.04.2008; in: "79th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Bremen 2008",
Wiley-VCH,
Volume 8; Issue 1
(2008),
S. 10383
- 10384.
Zusätzliche Informationen
-
A. Steindl:
"Stabilization of the radial equilibrium of a tethered satellite with respect to out-of-plane initial perturbations";
Vortrag: 85th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM),
Erlangen;
10.03.2014
- 14.03.2014; in: "85th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM)",
P. Steinmann, G. Leugering (Hrg.);
PAMM/ WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim,
14/1
(2014),
2 S.
Zusätzliche Informationen
-
A. Steindl:
"Stabilization of the Radial Position of a Tethered Satellite System";
Vortrag: ICOVP-2013,
Lissabon;
09.09.2013
- 12.09.2013; in: "ICOVP-2013 International Conference on Vibration Problems",
Z. Dimitrovová (Hrg.);
(2013),
8 S.
Zusätzliche Informationen
-
A. Steindl, A. Schirrer, S. Jakubek:
"Optimal Control for a Space Rendezvous";
Vortrag: 4th International Workshop on Advanced Dynamics and Model Based Control of Structures and Machines,
JKU Linz;
22.09.2019
- 25.09.2019; in: "Dynamics and Control of Advanced Structures and Machines",
H Irschik, M. Krommer, V. Matveenko, A. Belyaev (Hrg.);
Advanced Structured Materials/Springer, Cham,
156
(2019),
ISBN: 978-3-030-79324-1;
S. 243
- 256.
Zusätzliche Informationen
-
A. Steindl, H. Troger:
"Dimension reduction: A key concept in dynamics";
Vortrag: 6th EUROMECH Conference ENOC 2008,
St. Petersburg, Russia;
30.06.2008
- 04.07.2008; in: "Proceedings ENOC 2008",
A. Fradkov (Hrg.);
(2008),
5 S.
Zusätzliche Informationen
-
A. Steindl, H. Troger:
"Is the Sky-Hook Configuration Stable?";
Vortrag: Tenth Conference on Nonlinear Vibrations, Stabiliy, and Dynamics of Structures,
Blacksburg,VA;
25.07.2004
- 29.07.2004; in: "Proc. of Tenth Conference on Nonlinear Vibrations, Stabiliy, and Dynamics of Structures",
A.H. Nayfeh (Hrg.);
(2004),
2 S.
-
H. Steinrück, H. Troger, R. Weiss:
"Mode Jumping of Imperfect, Buckled Rectangular Plates";
Vortrag: Numercal Methods for Bifurcation Problems,
Dortmund;
20.08.1983
- 24.08.1983; in: "Numerical Methods for Bifurcation Problems",
T. Küpper, H. D. Mittelmann, H. Weber (Hrg.);
International Series of Numerical Mathematics, Vol 70,
(1983),
ISBN-7643-1627-6;
S. 515
- 524.
-
N. Steinschaden, H. Springer:
"Path-Following Analysis versus WMSL-Method - An Application for Nonlinear Magnetic Bearing Characteristics";
Vortrag: IFToMM Sixth International Conference on Rotor Dynamics,
Sydney, Australia;
30.09.2002
- 04.10.2002; in: "Proceedings of Sixth International Conference on Rotor Dynamics",
(2002),
ISBN: 0-7334-1963-1;
S. 71
- 78.
Zusätzliche Informationen
-
T. Strasser, F. Pröstl Andrén:
"Engineering and Validating Cyber-Physical Energy Systems: Needs, Status Quo, and Research Trends";
Hauptvortrag: 9th International Conference on Industrial Applications of Holonic and Multi-Agent Systems (HoloMAS),
Linz (eingeladen);
26.08.2019
- 27.08.2019; in: "Industrial Applications of Holonic and Multi-Agent Systems",
Springer Nature,
Cham, Switzerland
(2019),
ISBN: 978-3-030-27877-9;
S. 13
- 26.
Zusätzliche Informationen
-
T. Strasser, F. Pröstl Andrén, P. Vrba, R. Suhada, V. Moulis, A. Farid, S. Rohjans:
"An Overview of Trends and Developments of Internet of Things Applied to Industrial Systems";
Vortrag: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society,
Washington DC, USA;
21.10.2018
- 23.10.2018; in: "Proceedings of the IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society",
IEEE,
(2018),
ISBN: 978-1-5090-6683-4;
8 S.
Zusätzliche Informationen
-
L. Summerer, B. Putz, P. Kopacek, N. Kaya:
"First Results of Robots Crawling on a Loose Net in Micro-Gravity during a Sounding Rocket Experiment";
Vortrag: 57th International Astronautical Congress,
Valencia, Spain;
02.06.2006
- 06.06.2006; in: "Proceedings of the 57th International Astronautical Congress",
(2006).
-
M. Tautz, K. Besserer, S. Becker, A. Hüppe, M. Kaltenbacher:
"Numerisches Schema zur Berechnung von Δ p als akustische Quelle in hybriden CFD-CAA Simulationen";
Vortrag: DAGA 2015,
Nürnberg;
16.03.2015
- 19.03.2015; in: "41. Jahrestagung für Akustik",
(2015),
S. 868
- 871.
-
L. Tchobansky, M. Kozek, G. Schlager, H. Jörgl:
"A Purely Mechanical Energy Storing Concept for Hybrid Vehicles";
Vortrag: 2003 SAE Powertrain and Fluid Systems Conference,
Pittsburgh, Pennsylvania, USA;
27.10.2003
- 30.10.2003; in: "Hybrid Electric Vehicle Technology Developments",
SAE Bookstore,
SP-1808
(2003),
ISBN: 0-7680-1326-7.
Zusätzliche Informationen
-
A. Teufel:
"On synchronized solutions of coupled Van-der-Pol equations";
Vortrag: GAMM 2004,
Dresden;
21.03.2004
- 27.03.2004; in: "GAMM Annual Meeting Dresden 2004",
PAMM/ Wiley-VCH Verlag GmbH & Co.,
4
(2004),
2 S.
Zusätzliche Informationen
-
A. Teufel, A. Steindl, H. Troger:
"On nonsmooth bifurcations in a simple friction oscillator";
Vortrag: GAMM 2005,
Luxembourg;
28.03.2005
- 01.04.2005; in: "PAMM",
PAMM / WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim,
5
(2005),
2 S.
Zusätzliche Informationen
-
A. Teufel, A. Steindl, H. Troger:
"Rotating slip stick separation waves";
Vortrag: IUTAM Symposium on Dynamics and Control of Nonlinear Systems with Uncertainty,
Nanjing;
18.09.2006
- 22.09.2006; in: "IUTAM Symposium on Dynamics and Control of Nonlinear Systems with Uncertainty",
H. Hu, E. Kreuzer (Hrg.);
Springer,
(2006),
ISBN: 978-1-4020-6331-2;
S. 257
- 266.
Zusätzliche Informationen
-
A. Teufel, A. Steindl, H. Troger:
"Synchronization of Two Flow Excited Pendula";
Vortrag: 7th Conference on Dynamical Systems Theory and Application,
Lódz, Poland;
08.12.2003
- 11.12.2003; in: "Dynamical Systems Theory and Application",
(2003),
ISBN: 83-911-746-5-4;
S. 239
- 246.
-
E. Thonhofer, M. Fuhrmann, S. Jakubek:
"Parameter Identification and Model Validation of a Macroscopic Traffic Model";
Vortrag: IFAC World Congress 2017,
Toulouse;
09.07.2017
- 14.07.2017; in: "IFAC-PapersOnLine",
IFAC-PapersOnLine,
50/1/
(2017),
S. 12835
- 12840.
Zusätzliche Informationen
-
E. Thonhofer, S. Jakubek:
"Online Parameter Identification for Traffic Simulation via Lagrangian Sensing";
Vortrag: GAMM 86th Annual Scientific Conference,
Lecche, Italy;
23.03.2015
- 27.03.2015; in: "Proceedings in Applied Mathematics and Mechanics",
Wiley, Weinheim,
15(1)
(2015),
ISSN: 1617-7061;
S. 603
- 604.
Zusätzliche Informationen
-
E. Thonhofer, S. Jakubek:
"Online parameter identification for traffic simulation via Eulerian and Lagrangian sensing";
Vortrag: 3rd Polish Congress of Mechanics & 21st Computer Methods in Mechanics,
Gdansk;
08.09.2015
- 11.09.2015; in: "3rd Polish Congress of Mechanics, 21st International Conference on Computer Methods in Mechanics",
Vol. 1
(2015),
ISBN: 978-83-932107-5-6;
S. 65
- 66.
Zusätzliche Informationen
-
E. Thonhofer, M. Kozek, S. Jakubek:
"Dynamic Signal Optimization for Traffic Networks";
Poster: IEEE 20th International Conference on Intelligent Transportation Systems,
Yokohama, Japan;
16.10.2017
- 19.10.2017; in: "IEEE Xplore",
(2017),
ISSN: 2153-0017;
S. 1
- 6.
Zusätzliche Informationen
-
E. Thonhofer, E. Luchini, A. Kuhn, S. Jakubek:
"Online Parameter Estimation for a Flexible, Adaptive Traffic Network Simulation";
Vortrag: International Conference on Connected Vehicles and Expo 2014,
Wien;
03.09.2014
- 07.09.2014; in: "ICCVE 2014 Conference Proceedings",
(2014).
Zusätzliche Informationen
-
M. Tiefenbacher, S. Jakubek, M. Kozek:
"Modeling and Identification of a Chain Pendulum";
Vortrag: International Symposium on Models and Modeling Methodologies in Science and Engineering: MMMse 2011,
Orlando, Florida, USA;
27.03.2011
- 30.03.2011; in: "Proceedings of the MMMSE2011",
(2011),
ISBN: 9781936338221;
Paper-Nr. MB764KW,
6 S.
Zusätzliche Informationen
-
M. Tiefenbacher, M. Kozek:
"A Novel Approach to Extract Reference Trajectories from Measured Data Sets of Urban Light-Rail Systems";
Vortrag: 10th International Conference on Computational Structures Theory (CST 2010),
Valencia (eingeladen);
14.09.2010
- 17.09.2010; in: "Proceedings of the 10th International Conference on Computational Structures Technology",
B.H.V. Topping, J.M. Adam, F.J. Pallarés, R. Bru, M.L. Romero (Hrg.);
Civil-Comp Press,
(2010),
ISBN: 978-1-905088-37-9;
Paper-Nr. 41,
16 S.
Zusätzliche Informationen
-
M. Tiefenbacher, M. Kozek:
"Black Box Identification of Wheel Forces of a Railway Vehicle Using Asynchronously sampled Data";
Poster: 6th Vienna Mathmod 09,
Vienna;
11.02.2009
- 13.02.2009; in: "Proceedings of the 6th Mathmod Vienna 09",
Argesim Report, Abstract Volume,
No. 34
(2009),
ISBN: 978-3-901608-34-6.
Zusätzliche Informationen
-
M. Tiefenbacher, M. Kozek, T. Stefan:
"Black-Box Identification of Car Body Accelerations of a Light Rail Vehicle";
Vortrag: 21st International Symposium on Dynamics of Vehicles on Roads and Tracks,
Stockholm, Sweden;
17.08.2009
- 21.08.2009; in: "Proceedings of the IAVSD '09",
(2009),
Paper-Nr. P179,
11 S.
Zusätzliche Informationen
-
A. Tondl, H. Ecker:
"Suppression of self-excited vibrations in valve systems: passive means";
Vortrag: Dynamics of Machines 2007,
Prague;
06.02.2007
- 07.02.2007; in: "Proceedings Dynamics of Machines 2007",
L. Pesek (Hrg.);
Institute of Thermomechanics, ASCR,
Prague
(2007),
ISBN: 978-80-87012-03-1;
S. 185
- 192.
Zusätzliche Informationen
-
F. Toth, M. Dorfmeister, M. Kaltenbacher:
"Mechanical model of a pre-stressed piezoelectric buckling actuator";
Vortrag: AMA Conferences 2017,
Nürnberg (eingeladen);
30.05.2017
- 01.06.2017; in: "AMA Confereces 2017",
(2017),
S. 356
- 359.
-
F. Toth, M. Dorfmeister, M. Schneider, U. Schmid, M. Kaltenbacher:
"Non-linear analysis of a pre-stressed piezoelectric multi-layer plate";
Vortrag: Viii Eccomas 2017,
Madrid;
05.06.2017
- 08.06.2017; in: "VIII ECCOMAS Thematic Conference on Smart Structures and Materials SMART2017",
(2017),
S. 1307
- 1315.
-
F. Toth, H. Hassanpour Guilvaiee, M. Kaltenbacher:
"Coupling Flexible Structure and Viscous, Compressible Fluid: A Case for Model Order Reduction";
Poster: 25th International Congress of Theoretical and Applied Mechanics (ICTAM 2020+1),
Milano, Italy;
22.08.2021
- 27.08.2021; in: "25th International Congress of Theoretical and Applied Mechanics",
(2021),
ISBN: 978-83-65550-31-6;
S. 2598
- 2599.
-
F. Toth, H. Hassanpour Guilvaiee, M. Kaltenbacher:
"Efficient Modeling Strategies for Thermoviscous Acoustics";
Vortrag: 14th International Conference on Mathematical and Numerical Aspects of Wave Propagation,
Vienna;
25.08.2019
- 30.08.2019; in: "The 14th International Conference on Mathematical and Numerical Aspects of Wave Propagation",
M. Kaltenbacher, J. Melenk, L. Nannen, F. Toth (Hrg.);
Institute of Mechanics and Mechatronics, Faculty of Mechanical and Industrial Engineering, Institute of Analysis and Scientific Computing, Faculty of Mathematics and Geoinformation, TU Wien Wien,
(2019),
ISBN: 978-3-200-06511-6;
S. 160
- 161.
-
F. Toth, M. Kaltenbacher:
"Steady state dynamics of pre-stressed, piezoelectrically excited circular plates -- a harmonic balance approach";
Vortrag: GAMM 2019 - 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics,
Universität Wien, Austria;
18.02.2019
- 22.02.2019; in: "PAMM",
Wiley,
(2019).
-
F. Toth, M. Kaltenbacher, F. G. Rammerstorfer:
"Modelling of Air Chamber Supported Floating Platforms - Coupling Free Surface Flow, Compressible Air, and Flexible Structures";
Vortrag: VI International Conference on Coupled Problems in Science and Engineering,
Venedig;
18.05.2015
- 20.05.2015; in: "Coupled Problems in Science and Engineering",
B.A. Schrefler, E. Oñate, M. Papadrakakis (Hrg.);
CIMNE,
Barcelona, Spanien
(2015),
ISBN: 978-84-943928-3-2;
S. 346
- 357.
Zusätzliche Informationen
-
F. Toth, M. Kaltenbacher, K. Roppert:
"Precise Modelling of Stationary Induction Heating Processes";
Vortrag: COUPLED 2019,
Barcelona;
03.06.2019
- 05.06.2019; in: "VIII International Conference on Coupled Problems in Science and Engineering",
(2019).
-
F. Toth, D. Mayrhofer, M. Kaltenbacher, K. Roppert:
"Modelling of Step-Lap Joints using the Harmonic Balance Method";
Vortrag: COMPUMAG 2019,
Paris;
15.07.2019
- 19.07.2019; in: "22nd International Conference on the Computation of Electromagnetic Fields",
(2019).
-
D. Tumpold, M. Kaltenbacher:
"Modeling Methods of MEMS Speaker Devices with Electrostatic Driving Principle.";
Vortrag: ANSYS Conference & 31. CADFEM Users´ Meeting 2013,
Mannheim, Germany (eingeladen);
19.06.2013
- 21.06.2013; in: "ANSYS Conference & 31. CADFEM Users´ Meeting 2013",
ACUM 2013,
(2013),
ISBN: 3-937523-10-3;
S. 1
- 12.
Zusätzliche Informationen
-
D. Tumpold, M. Kaltenbacher:
"Precise numerical simulation of electrostatically driven actuators with application to MEMS loudspeakers";
Vortrag: 8th European Nonlinear Dynamics Conference ENOC 2014,
Wien;
06.07.2014
- 11.07.2014; in: "ENOC 2014",
ENOC 2014 - Proceedings of 8th European Nonlinear Dynamics Conference,
(2014),
ISBN: 978-3-200-03433-4;
S. 1
- 6.
Zusätzliche Informationen
-
D. Tumpold, M. Kaltenbacher, C. Glacer, M. Nawaz, A. Dehé:
"Modeling Methods of MEMS Micro-Speaker with Electrostatic Working Principle";
Poster: SPIE Microtechnologies 2013,
Grenoble, France;
24.05.2013
- 26.05.2013; in: "Proceedings of SPIE Microtechnologies 2013",
Smart Sensors, Actuators, and MEMS VI,
SPIE Vol. 8763, 876324, Grenoble
(2013),
ISBN: 978-0-8194-9565-5;
S. 1
- 12.
Zusätzliche Informationen
-
D. Tumpold, M. Kaltenbacher, C. Glacer, M. Nawaz, A. Dehé:
"Modeling of an electrostatically actuated microelectromechanical (MEMS) speaker system";
Vortrag: PRIME 2013 9th Conference on Ph. D. Research in Microelectronics and Electronics,
Villach;
24.06.2013
- 27.06.2013; in: "Conference Proceedings PRIME2013 9th Conference on Ph. D. Research in Microelectronics and Electronics",
IEEE Operations Center, 445 Hoes Lane, NJ 08854,
CFP13622-PRT
(2013),
ISBN: 978-1-4673-4580-4;
S. 293
- 296.
Zusätzliche Informationen
-
M. Tutz, H. Schmiedmayer:
"The Lower Limb as Elastic Multi Body System";
Vortrag: Computer Methods in Biomechanics and Biomechanical Engineering,
Madrid;
25.02.2004
- 28.02.2004; in: "Computer Methods in Biomechanics & Biomedical Engineering - 5",
J. Middleton, N.G. Shrive, M.L. Jones (Hrg.);
FIRST Numerics Ltd.,
(2004),
6 S.
-
J. Unger, C. Hametner, S. Jakubek, M. Quasthoff:
"Optimal Model Based Design of Experiments Applied to High Current Rate Battery Cells";
Vortrag: IEEE International Conference on Electrical Systems for Aircraft, Railways, Ship Propulsion and Road Vehicles (ESARS 2012 Edition),
Bologna;
16.10.2012
- 18.10.2012; in: "International Conference on Electrical Systems for Aircraft, Railways, Ship Propulsion and Road Vehicles",
(2012),
ISBN: 978-1-4673-1371-1;
6 S.
Zusätzliche Informationen
-
J. Unger, M. Kozek, S. Jakubek:
"Verfahren zur Ordnungsreduktion für Modellprädiktive Regelung";
Vortrag: 17. Steirisches Seminar über Regelungstechnik und Prozessautomatisierung,
Schloss Retzhof, Leibnitz, Österreich (eingeladen);
05.09.2011
- 08.09.2011; in: "SSRP 2011",
(2011),
ISBN: 978-3-901439-08-7;
S. 17
- 31.
Zusätzliche Informationen
-
Y. Vetyukov:
"Buckling and supercritical behavior of axially moving plates";
Vortrag: International Summer School-Conference APM-2015,
St. Petersburg, Russia;
06/2015; in: "Proceedings of the International Summer School-Conference APM",
(2015),
S. 448
- 455.
-
Y. Vetyukov, P.G. Gruber, M. Krommer:
"Modeling finite deformations of an axially moving elastic plate with a mixed Eulerian-Lagrangian kinematic description";
Vortrag: 3rd Polish Congress of Mechanics & 21st Computer Methods in Mechanics,
Gdansk, Poland;
09/2015; in: "Proceedings of the PCM-CMM-2015 - 3rd Polish Congress of Mechanics & 21st Computer Methods in Mechanics",
M. Kleiber et al. (Hrg.);
(2015),
S. 67
- 68.
Zusätzliche Informationen
-
E. Viennet, A. Steindl, H. Troger:
"Control of Electrodynamic Tether Vibrations in Space";
Vortrag: GAMM 2005,
Luxembourg;
28.03.2005
- 01.04.2005; in: "PAMM Annual Meeting",
PAMM/ WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim,
(2005),
2 S.
Zusätzliche Informationen
-
J. Vilsecker, M. Plöchl, J. Edelmann, F. Magerl:
"Effects of running through tramway turnouts on vehicle design";
Vortrag: 23rd International Symposium on Dynamics of Vehicles on Roads and Tracks,
Qingdao;
19.08.2013
- 23.08.2013; in: "23rd International Symposium on Dynamics of Vehicles on Roads and Tracks",
(2013),
7 S.
-
B. Voglauer, R. Garcia, H. Jörgl:
"Improvements of a Three-Tank-System Operated in Real Time with MATLAB in a PLC-Profibus-Network";
Vortrag: 16th IFAC World Congress,
Prague;
03.07.2005
- 08.07.2005; in: "Preprints of the 16th IFAC",
(2005).
Zusätzliche Informationen
-
B. Voglauer, W. Geyrhofer, H. Jörgl:
"A model based control concept with knowledge based overhead control of a roasting process";
Vortrag: Proceedings of the 2004 American Control Conference,
Boston, Massachusetts;
30.06.2004
- 02.07.2004; in: "Proceedings of the 2004 American Control Conference",
(2004),
S. 3581
- 3586.
-
B. Voglauer, W. Geyrhofer, H. Jörgl:
"Comparison of two Control Strategies for a Roast Process";
Vortrag: EPD Congress 2004,
Charlotte, North Carolina, USA;
14.03.2004
- 18.03.2004; in: "EPD Congress 2004",
(2004),
S. 423
- 429.
-
B. Voglauer, A. Grausam, H. Jörgl:
"Reaction-kinetics of the vanadium roast process using steel slag as a secondary raw material";
Vortrag: Conference on Processing & Disposal of Mineral Industry Wastes '03,
Falmouth, UK;
18.06.2003
- 20.06.2003; in: "Proceedings of the Conference on Processing & Disposal of Mineral Industry Wastes '03",
(2003),
5 S.
Zusätzliche Informationen
-
B. Voglauer, H. Jörgl:
"Dynamic Model of a Roast Process for Simulation and Control";
Vortrag: 4th IMACS Symposium on Mathematical Modelling,
Vienna, Austria;
05.02.2003
- 07.02.2003; in: "Proceedings 4th IMACS Symposium on Mathematical Modelling",
(2003),
ISBN: 3-901608-24-9;
13 S.
Zusätzliche Informationen
-
A. Voigt, F. Winter, M. Kozek:
"Oxychlorination of Ethylene to 1,2-Dichlorethane Using a Novel Fluidized Bed Reactor Concept";
Vortrag: ACHEMA 2003,
Frankfurt am Main;
19.05.2003
- 24.05.2003; in: "ACHEMA 2003 Programm",
(2003),
1 S.
Zusätzliche Informationen
-
A. Wasicek, O. Höftberger, M. Elshuber, H. Isakovic, A Fleck:
"Virtual CAN Lines in an Integrated MPSoC Architecture";
Vortrag: 17th IEEE International Symposium on Object/Component-Oriented Real-Time Distributed Computing (ISORC),
Reno, Nevada, USA;
08.06.2014
- 12.06.2014; in: "Proc. of the 12th IEEE International Conference on Industrial Informatics",
(2014),
ISSN: 1555-0885;
S. 158
- 165.
Zusätzliche Informationen
-
A. Wasserburger, N. Didcock, S. Jakubek, C. Hametner:
"Risk Averse Real Driving Emissions Calibration under Uncertainties";
Vortrag: International Conference on Calibration Methods and Automotive Data Analytics,
Berlin, Deutschland;
21.05.2019
- 22.05.2019; in: "International Conference on Calibration Methods and Automotive Data Analytics",
expert verlag GmbH,
Tübingen
(2019),
ISBN: 978-3-8169-3463-9;
S. 211
- 218.
Zusätzliche Informationen
-
A. Wasserburger, C. Hametner:
"Automated Generation of Real Driving Emissions Compliant Drive Cycles Using Conditional Probability Modeling";
Vortrag: 2020 IEEE Vehicular Power and Propulsion Conference,
Gijon, Spanien;
18.11.2020; in: "2020 IEEE Vehicular Power and Propulsion Conference",
(2020),
S. 1
- 6.
Zusätzliche Informationen
-
A. Wasserburger, A. Schirrer, C. Hametner:
"Stochastic Optimization for Energy-Efficient Cooperative Platooning";
Poster: IEEE Vehicle Power and Propulsion Conference 2019,
Hanoi, Vietnam;
14.10.2019
- 17.10.2019; in: "2019 IEEE Vehicle Power and Propulsion Conference (VPPC)",
(2019),
6 S.
Zusätzliche Informationen
-
J. Wassermann:
"Bildsynchrone Messdatenerfassung und -analyse mit LabVIEW";
Vortrag: 7.Anwenderkongress VIP 2002 Virtuelle Instrumente in der Praxis,
München, Deutschland;
06.03.2002
- 07.03.2002; in: "Virtuelle Instrumente in der Praxis",
R. Jamal, H. Jaschinski (Hrg.);
Hüthig,
Heidelberg München
(2002),
ISBN: 3-7785-2873-4;
S. 106
- 109.
Zusätzliche Informationen
-
J. Wassermann, M. Schneeberger, F. Höftberger, K. Hoffmann, A. Pirko, K. Decker, M. Schneider:
"Wireless Data Transfer System for Rotating Machinery - Very Robust Against Electromagnetic Interference";
Vortrag: 1st International Conference on Sensing Technology,
Palmerston North, New Zealand (eingeladen);
21.11.2005
- 23.11.2005; in: "Proceedings of the First International Conference on Sensing Technology",
(2005),
ISBN: 0-473-10504-7;
S. 647
- 651.
-
J. Wassermann, A. Schulz, M. Schneeberger:
"Active Magnetic Bearings of High Reliability";
Vortrag: IEEE International Conference on Industrial Technology (ICIT) 2003,
Maribor, Slovenia;
10.12.2003
- 12.12.2003; in: "Proceedings Int. Conf. on Industrial Technology",
(2003),
ISBN: 0-7803-7853-9;
S. 194
- 197.
-
J. Wassermann, A. Schulz, M. Schneeberger:
"Konzept eines betriebssicheren Magnetlagersystems";
Vortrag: 6.Workshop Mechatronische Systeme,
Kassel, Deutschland;
25.09.2003
- 26.09.2003; in: "Tagungsband 2003 6.Workshop Mechatronische Systeme",
(2003),
S. 9
- 17.
-
J. Weber, C. Scheit, A. Hüppe, S. Becker, M. Kaltenbacher:
"Simulation der Strömungsakustik einer vertikalen Kleinwindturbine";
Vortrag: DAGA 2015,
Nürnberg;
16.03.2015
- 19.03.2015; in: "41. Jahrestagung für Akustik",
(2015),
S. 531
- 533.
-
M. Weigel, P. Lugner, M. Plöchl:
"Ein Fahrermodell für einen zweigliedrigen Fahrzeugzug";
Vortrag: Grazer Nutzfahrzeug Workshop,
Graz;
14.05.2004; in: "TagungsCD des 1. Grazer Nutzfahrzeug Workshops",
(2004).
-
M. Weitz, S. Schoder, P. Maurerlehner, S. Falk, M. Döllinger, M. Kaltenbacher:
"Acoustic Source Term interpolation in Hybrid Aeroacoustic simulation of human phonation";
Vortrag: 23rd International Congress on Acoustics,
Aachen (eingeladen);
09.09.2019
- 13.09.2019; in: "23rd International Congress on Acoustics",
(2019).
-
J. Welte, H. Ecker:
"Vibrations of a Parametrically Excited MEMS-Structure with Two Masses";
Vortrag: MATHMOD 2012 - 7th Vienna International Conference on Mathematical Modelling,
Wien/AT;
15.02.2012
- 17.02.2012; in: "Mathmod Vienna 2012",
I. Troch, F. Breitenecker (Hrg.);
(2012),
6 S.
Zusätzliche Informationen
-
C. Westermayer, A. Schirrer, M. Hemedi, M. Kozek:
"An advanced criterion for optimal actuator and sensor placement on complex flexible structures";
Vortrag: IFAC Workshop on Control Applications of Optimisation 09,
Jyväskylä, Finland;
06.05.2009
- 08.05.2009; in: "IFAC-PapersOnLine",
(2009),
6 S.
Zusätzliche Informationen
-
C. Westermayer, A. Schirrer, M. Hemedi, M. Kozek:
"An H-infinity full information approach for the feedforward controller design of a large BWB flexible aircraft";
Vortrag: 4th European Conference for Aerospace Sciences (EUCASS),
St. Petersburg (eingeladen);
04.07.2011
- 08.07.2011; in: "Proceedings of the 4th European Conference for Aerospace Sciences (EUCASS)",
(2011),
Paper-Nr. 658,
16 S.
Zusätzliche Informationen
-
C. Westermayer, A. Schirrer, M. Hemedi, M. Kozek:
"Linear parameter-varying control of a large blended wing body flexible aircraft";
Vortrag: 18th IFAC Symposium on Automatic Control in Aerospace,
Nara, Japan;
06.09.2010
- 10.09.2010; in: "Proceedings of the 18th IFAC Symposium on Automatic Control in Aerospace",
(2010),
ISSN: 1474-6670;
6 S.
Zusätzliche Informationen
-
C. Westermayer, A. Schirrer, M. Hemedi, M. Kozek, T. Hanis, M. Hromcik:
"Optimal sensor placement in flexible structures: energy vs. information based criteria";
Vortrag: 6th Vienna Mathmod 09,
Vienna;
11.02.2009
- 13.02.2009; in: "Proceedings of the 6th Mathmod Vienna 09",
Argesim Report,
No. 35
(2009),
ISBN: 978-3-901608-35-3;
Paper-Nr. 238,
7 S.
Zusätzliche Informationen
-
C. Westermayer, A. Schirrer, M. Hemedi, M. Kozek, A. Wildschek:
"Robust H-inf flight and load control of a flexible aircraft using a 2DOF multi-objective design";
Vortrag: 2009 CACS International Automatic Control Conference,
Taipei, Taiwan;
27.11.2009
- 29.11.2009; in: "2009 CACS International Automatic Control Conference",
(2009),
ISBN: 978-986-84845-1-1;
Paper-Nr. 00081,
7 S.
Zusätzliche Informationen
-
A. Wildschek, R. Maier, M. Hromcik, T. Hanis, A. Schirrer, M. Kozek, C. Westermayer, M. Hemedi:
"Hybrid Controller for Gust Load Alleviation and Ride Comfort Improvement using Direct Lift Control Flaps";
Vortrag: 3rd European Conference for Aerospace Sciences (EUCASS),
Paris, France;
06.07.2009
- 09.07.2009; in: "3rd European Conference for Aerospace Sciences (EUCASS)",
(2009),
978-2-930389-47-8;
Paper-Nr. p_21,
10 S.
Zusätzliche Informationen
-
N. Witkowski, A. Hüppe, M. Kaltenbacher:
"Comparison of Compressible and Incompressible CFD Methods for the Acoustic Analysis of Flow Induced Noise in Con ned Flow";
Vortrag: DAGA 2015,
Nürnberg;
16.03.2015
- 19.03.2015; in: "41. Jahrestagung für Akustik",
(2015),
S. 1054
- 1057.
-
M. Würzl, E. Schierer:
"Game-Strategies for Robotsoccer";
Vortrag: CLAWAR / EURON / IARP Workshop on Robots in Entertainment, Leisure and Hobby - ELH'04,
Vienna University of Technology, Vienna, Austria;
02.12.2004
- 04.12.2004; in: "CLAWAR / EURON / IARP Workshop on Robots in Entertainment, Leisure and Hobby - ELH'04 Proceedings",
Institut für Mechanik und Mechatronik / Abt. 6 Intelligente Handhabungs- und Robotertechnik,
TU Wien, Wien, Österreich
(2004),
ISBN: 3-902161-04-3.
-
M. Würzl, E. Schierer:
"Strategies for Mirosot";
Vortrag: 2004 Korea-Austria Joint Seminar on Intelligent Robotics (während 2004 FIRA Robot World Congress),
Bexco, Busan, Korea;
28.10.2004; in: "2004 Korea-Austria Joint Seminar on Intelligent Robotics",
(2004),
S. 44
- 49.
-
J. Wurzenberger, R. Heinzle, Maxime Deregnaucourt, T. Katrasnik:
"A Comprehensive Study on Different System Level Engine Simulation Models";
Vortrag: SAE 2013 World Congress & Exhibition,
Detroit;
24.04.2012
- 26.04.2012; in: "SAE",
SAE International,
SAE Technical Paper
(2013),
S. 1
- 15.
Zusätzliche Informationen
-
A. Wurzinger, H. Leibinger, S. Jakubek, M. Kozek:
"Data driven modeling and nonlinear model predictive control design for a rotary cement kiln";
Vortrag: Joint Mechatronics 2019 & NolCoS 2019,
Wien (eingeladen);
04.09.2019
- 06.09.2019; in: "Joint Mechatronics 2019 & NolCoS 2019",
(2019),
Paper-Nr. 176,
6 S.
Zusätzliche Informationen
-
C. Zanabria, F. Pröstl Andrén, T. Strasser:
"Comparing Specification and Design Approaches for Power Systems Applications";
Vortrag: 2018 IEEE PES Transmission & Distribution Conference and Exhibition - Latin America (T&D-LA),
Lima, Peru;
18.09.2018
- 21.09.2018; in: "Proceedings of 2018 IEEE PES Transmission & Distribution Conference and Exhibition - Latin America (T&D-LA)",
IEEE,
(2018),
ISBN: 978-1-5386-5844-4;
5 S.
Zusätzliche Informationen
-
C. Zanabria, F. Pröstl Andrén, T. Strasser, W. Kastner:
"A Model-Driven and Ontology-based Engineering Approach for Smart Grid Automation Applications";
Vortrag: IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society,
Lisbon, Portugal;
14.10.2019
- 17.10.2019; in: "Proceedings of the IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society",
IEEE,
(2019),
ISBN: 978-1-7281-4878-6;
7 S.
Zusätzliche Informationen
-
C. Zauner, G. Boisdequin, M. Eisenbarth, T. Maulick, M. Plöchl, J. Edelmann:
"Simulation-based identification of excitation spectra for a dynamic suspension test rig";
Vortrag: 17. Internationales Stuttgarter Symposium,
Stuttgart;
14.03.2017
- 15.03.2017; in: "17. Internationales Stuttgarter Symposium",
M. Bargende, H. Reuss, J. Wiedemann (Hrg.);
Springer Vieweg,
2
(2017),
ISBN: 978-3-658-16987-9;
S. 393
- 408.
-
M. Zauner, S. Jakubek, C. Hametner:
"Flachheitsbasierte diskrete Regelung eines Batterieemulators für Lasten mit konstanter Leistungsaufnahme";
Vortrag: 54. Regelungstechnisches Kolloquium in Boppard,
Boppard (eingeladen);
04.03.2020
- 06.03.2020; in: "54. Regelungstechnisches Kolloquium in Boppard Programm",
(2020),
S. 23
- 24.
Zusätzliche Informationen
-
M. Zauner, M. Killian, L. Böhler, M. Kozek, R. Goldgruber, A. Leitner et al.:
"Smart home management system with extensive disturbance predictions";
Vortrag: e-nova 2018 Internationaler Kongress: Gebäude der Zukunft? vernetzt - digital - ökosozial,
Pinkafeld;
22.11.2018
- 23.11.2018; in: "enova 2018",
M. Zauner (Hrg.);
Leykam,
Gebäude der Zukunft? vernetzt - digital - ökosozial
(2018),
ISBN: 978-3-7011-0420-8;
S. 113
- 120.
Zusätzliche Informationen
-
M. Zauner, M. Killian, M. Kozek:
"Localized Online Weather Predictions with Overnight Adaption";
Vortrag: ITISE 2018,
Granada, Spain;
19.09.2018
- 21.09.2018; in: "International conference on Time Series and Forecasting",
M. Zauner (Hrg.);
Proceedings of Papers ITISE 2018,
Volume 1
(2018),
ISBN: 978-84-17293-57-4;
S. 250
- 259.
Zusätzliche Informationen
-
F. Zehetbauer, J. Edelmann, M. Plöchl, G. Kalss:
"Modeling and optimization of the shape of an opening guide";
Vortrag: Conference on Modeling Simulation and Applied Optimization,
Bahrain;
15.04.2019
- 17.04.2019; in: "8th Conference on Modeling Simulation and Applied Optimization",
(2019),
5 S.
-
F. Zenger, C. Junger, M. Kaltenbacher, S. Becker:
"Investigation of the flow- and sound-field of a low-pressure axial fan benchmark case using experimental and numerical";
Vortrag: Journal of the Acoustical Society of America,
Boston;
25.06.2017
- 29.06.2017; in: "Journal of the Acoustical Society of America 141",
141
(2017),
1 S.
Zusätzliche Informationen
-
M. Zigo, W. Mack, G. Kepplinger:
"Computationally effective spot-weld fatigue life estimation for vehicle components";
Vortrag: GAMM 2019 - 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics,
Universität Wien, Austria;
18.02.2019
- 22.02.2019; in: "90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM)",
Wiley,
(2019).
-
S. Zörner, M. Kaltenbacher:
"Comparison of a fully coupled fluid structure simulation and prescribed movement in the phonation process";
Vortrag: Pan European Voice Conference,
Marseille, France;
31.08.2011
- 03.09.2011; in: "Pan European Voice Conference",
A. Giovanni (Hrg.);
(2011),
S. 195.
-
S. Zörner, M. Kaltenbacher:
"Importance on fully coupled fluid structure interaction in human phonation";
Vortrag: International Conference on Finite Elements in Flow Problems,
München;
23.03.2011
- 25.03.2011; in: "International Conference on Finite Elements in Flow Problems",
W.A. Wall (Hrg.);
(2011),
S. 225.
-
S. Zörner, P. Sidlof, A. Hüppe, M. Kaltenbacher:
"Strömung-Struktur-Interaktion in der menschlichen Stimmbildung und korrekte Modellierung der resultierenden aeroakustischen Quellen und Schallausbreitung";
Vortrag: DAGA 2015,
Nürnberg (eingeladen);
16.03.2015
- 19.03.2015; in: "41. Jahrestagung für Akustik",
(2015),
S. 50
- 53.
Zusätzliche Informationen
Vorträge und Posterpräsentationen (ohne Tagungsband-Eintrag)
-
E. Arslan, W. Mack:
"Elastic limit analysis of a thick-walled cylindrical panel subject to radial heating";
Vortrag: GAMM 2012,
Darmstadt/DE;
26.03.2012
- 30.03.2012.
-
E. Arslan, W. Mack:
"Elastic-plastic states of a rotating inhomogeneously-heated strain-hardening hollow shaft";
Vortrag: GAMM 2007,
Zürich;
16.07.2007
- 20.07.2007.
-
E. Arslan, W. Mack, A.N. Eraslan:
"The rotating elastic-plastic hollow shaft heated at its inner surface";
Vortrag: 80th Annual Meeting of the GAMM,
Danzig;
09.02.2009
- 13.02.2009.
-
E. Arslan, W. Mack, A.N. Eraslan:
"Transient heating of a rotating elastic-plastic solid shaft";
Vortrag: GAMM-Jahrestagung 2008 (79th Annual Meeting of the Association for Applied Mathematics and Mechanics),
Bremen;
31.03.2008
- 04.04.2008.
-
S. Becker, J. Weber, C. Scheit, J. Grabinger, M. Kaltenbacher:
"Hybrid Aeroacoustic Method for Noise Predicion of Wind Turbines";
Vortrag: AIA-DAGA 2013,
Meran (eingeladen);
18.03.2013
- 21.03.2013.
-
C. Benatzky, M. Kozek:
"Aktive Schwingungsdämpfung durch Regelung elastischer Fahrzeugstrukturen";
Vortrag: Vienna Rail Research Initiative Meeting 2005 (VRRI-Meeting 2005),
Siemens Transportation Systems, Wien;
29.06.2005.
-
C. Benatzky, M. Kozek:
"Aktive Schwingungsdämpfung durch Regelung elastischer Fahrzeugstrukturen";
Vortrag: Vienna Rail Research Initiative Meeting 2006 (VRRI-Meeting 2006),
Siemens Transportation Systems, Wien;
08.06.2006.
-
C. Benatzky, M. Kozek, H. Jörgl:
"Ein Konzept zur aktiven Schwingungsdämpfung von Schienenfahrzeug-Wagenkästen";
Vortrag: 41. Regelungstechnisches Kolloquium in Boppard am Rhein,
Boppard am Rhein;
21.02.2007
- 23.02.2007.
-
H. J. Böhm, M. Kozek:
"Überblick über Simulationsmethoden";
Vortrag: Österr. Ingenieur- und Architektenverein (ÖIAV),
Vienna;
10.04.2000.
-
I. Bozkurt, E. Arslan:
"Analytical and Finite Element Modeling of Elastic-Plastic Shrink Fit with Hollow Shaft";
Vortrag: 20th International Conference on Composite Structures (ICCS20),
Paris;
04.09.2017
- 07.09.2017.
-
I. Bozkurt, E. Arslan:
"Mathematical Models for Elastic-Plastic Shrink Fit with Solid Inclusion";
Vortrag: 1st International Symposium on Light Alloys and Composite Materials (ISLAC´18),
Karabuk, Turkey;
22.03.2018
- 24.03.2018.
-
Maxime Deregnaucourt, A. Rainer, N. Didcock:
"Versuchsplanung für Emissionsmodelle mit selektiver Genauigkeit";
Vortrag: 4. Workshop fuer Modellbasierte Kalibriermethoden,
TU Wien;
08.11.2013.
-
Maxime Deregnaucourt, J. Wurzenberger:
"Optimales dynamisches DoE mit BOOST RT";
Vortrag: 2. Workshop fuer Modellbasierte Kalibriermethoden,
TU Wien;
23.09.2011.
Zusätzliche Informationen
-
N. Didcock, S. Jakubek, N. Keuth:
"Spatial Constraints in Parametric Optimisation";
Poster: Vienna Young Scientists Symposium (VSS) 2015,
Wien;
25.06.2015
- 26.06.2015.
Zusätzliche Informationen
-
N. Didcock, A. Rainer:
"Model Ensembles: Automated Model Parametrisation and Meta-Models";
Vortrag: 4. Workshop fuer Modellbasierte Kalibriermethoden,
TU Wien;
08.11.2013.
-
F. Dohnal:
"Fourier Analysis of Suppression of Self-Excited Vibrations by Parametric Excitation";
Vortrag: Euromech Colloquium 457 on Nonlinear Modes of Vibrating Systems,
Frejus, France;
07.06.2004
- 09.06.2004.
-
F. Dohnal:
"Suppressing Self-Excited Vibrations in a Coupled Pendulum System";
Poster: 21st International Congress of Theoretical and Applied Mechanics,
Warszawa;
15.08.2004
- 21.08.2004.
-
F. Dohnal:
"Suppression of self-excited vibrations by parametric excitation in a two degree of freedom system";
Vortrag: Wissenschaftskolleg Differential Equations,
Wien (eingeladen);
13.05.2004.
-
F. Dohnal:
"Vibration Control of Self-Excited Oscillations by Parametric Stiffness Excitation";
Vortrag: ICSV11-Eleventh International Congress on Sound and Vibration,
St.Petersburg;
05.07.2004
- 08.07.2004.
-
F. Dohnal:
"Vibration suppression of self-excited oscillations by parametric inertia excitation";
Vortrag: GAMM 2005,
Luxembourg;
28.03.2005
- 01.04.2005.
-
R. Duy, Y. Vetyukov, S. Eisenträger:
"Fictitious Domain Approach for Optimizing Stability Boundaries of Plates with Cutouts";
Vortrag: 14th World Congress on Computational Mechanics (WCCM 2020, Paris),
Paris;
11.01.2021
- 15.01.2021.
Zusätzliche Informationen
-
H. Ecker:
"A parametric absorber for friction-induced vibrations";
Vortrag: 2003 ASME Design Engineering Technical Conferences,
Chicago,IL;
02.09.2003
- 06.09.2003.
-
H. Ecker:
"A Study on Parametric Excitation for Suppressing Self-Excited Rotor Vibrations";
Vortrag: IFToMM Sixth International Conference on Rotor Dynamics,
Sydney, Australia;
30.09.2002
- 04.10.2002.
-
H. Ecker:
"Amplification of damping in mechanical structures near parametric anti-resonances";
Vortrag: Structural Engineering Seminar,
University of San Diego, La Jolla, CA (eingeladen);
03.04.2006.
-
H. Ecker:
"Automotive History in Austria at the Beginning of the 20th Century";
Vortrag: Fulbright Occasional Lecturer Program,
Point Loma Nazarene Univ., San Diego (eingeladen);
11.11.2005.
-
H. Ecker:
"Dynamical Phenomena in Systems with Time-Periodic Coefficients";
Vortrag: Colloquium at TU Ostrava,
Ostrava (eingeladen);
07.12.2009.
-
H. Ecker:
"Einsatz von versuchs- und messtechnischen Methoden bei der Rekonstruktion von Verkehrsunfällen";
Hauptvortrag: 30. Internationales Fachseminar "Straßenverkehrsunfall und Fahrzeugschaden",
Bad Hofgastein (eingeladen);
21.01.2007
- 26.01.2007.
Zusätzliche Informationen
-
H. Ecker:
"Equivalent Damping Obtained from Parametric Stiffness Excitation";
Vortrag: Euromech Colloquium 457 on Nonlinear Modes of Vibrating Systems,
Frejus, France;
07.06.2004
- 09.06.2004.
-
H. Ecker:
"Experimental and numerical studies of a rotor contacting the stator";
Vortrag: Duke University,
Durham, North Carolina (eingeladen);
03.08.2004.
-
H. Ecker:
"Experimental results obtained from a rotor with intermittent stator contact";
Vortrag: Dynamics of Machines 2003,
Prague;
11.02.2003
- 12.02.2003.
-
H. Ecker:
"Experimental results on parametric excitation damping of an axially loaded cantilever beam";
Vortrag: ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering (IDETC09),
San Diego, California, USA;
30.08.2009
- 02.09.2009.
Zusätzliche Informationen
-
H. Ecker:
"Experimentelle Untersuchung von Anstreifvorgängen mit einem Rotorprüfstand";
Vortrag: SIRM 2003, Schwingungen in rotierenden Machinen,
Darmstadt;
26.02.2003
- 28.02.2003.
-
H. Ecker:
"Gegenseitige Beeinflussung von selbsterregten und parametererregten Schwingungen in mechanischen Systemen";
Vortrag: Seminar Institut für Allgemeine Physik (IAP),
TU Wien;
18.01.2005.
Zusätzliche Informationen
-
H. Ecker:
"Neue Konzepte zur Stabilisierung dynamischer Systeme";
Vortrag: Vortragsreihe Mechanik,
Graz (eingeladen);
14.09.2009.
-
H. Ecker:
"Neue Wege bei der Vermeidung von Schwingungen";
Vortrag: Kolloquium über neuere Arbeiten auf dem Gebiete der Mechanik und Strömungslehre, Techn. Universität Wien,
Wien (eingeladen);
24.06.2009.
-
H. Ecker:
"Parametric excitation as a mean for vibration suppression";
Hauptvortrag: Seventh International Conference on Vibration Problems (ICOVP-2005),
Sile, Turkey (eingeladen);
05.09.2005
- 09.09.2005.
-
H. Ecker:
"Recent developments in systems with time-periodic coefficients";
Vortrag: Seminar on Mechanics, Shanghai Jiao Tong University,
Shanghai, China (eingeladen);
23.09.2010.
-
H. Ecker:
"Schwingungsbeeinflussung durch Parametererregung - Stand der Technik, Einsatzmöglichkeiten und Entwicklungstrends";
Hauptvortrag: VDI-Fachtagung Schwingungen 2017,
Nürtingen (eingeladen);
10.10.2017
- 11.10.2017.
Zusätzliche Informationen
-
H. Ecker:
"Some results on parametric anti-resonances in mechanical systems";
Vortrag: Workshop on Nonlinear Oscillations and Tori,
Vienna University of Technology, Vienna;
13.02.2006.
-
H. Ecker:
"Stabilization of a rigid rotor by a time-varying stiffness of the bearing mounts";
Vortrag: Eighth International Conference on Vibrations in Rotating Machinery,
Swansea, UK;
07.09.2004
- 09.09.2004.
-
H. Ecker:
"Suppression of Vibrations in Mechanical Systems by Parametric Excitation";
Vortrag: Habilitationskolloquium,
Wien;
01.03.2004.
-
H. Ecker:
"Unstable torsional vibrations of centrifuges";
Vortrag: Duke Vibrations Workshop,
Durham/NC, USA (eingeladen);
27.05.2010
- 28.05.2010.
-
H. Ecker:
"Vibration Suppression by Parametric Stiffness Excitation";
Vortrag: Nonlinear Vibration Workshop,
Durham, North Carolina, USA (eingeladen);
06.06.2008.
-
H. Ecker, J Kogler:
"First critical speed determination of a rotor via low-speed measurements";
Vortrag: GAMM 2019 - 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics,
Universität Wien, Austria;
18.02.2019
- 22.02.2019.
Zusätzliche Informationen
-
H. Ecker, W. Paradeiser:
"Experimentelle Ergebnisse zur Beeinflussung von Schwingungen durch zeitvariante Steifigkeiten";
Vortrag: Kolloquium über neuere Arbeiten auf dem Gebiete der Mechanik und Strömungslehre, Techn. Universität Wien,
Wien;
29.11.2006.
Zusätzliche Informationen
-
H. Ecker, H. Springer:
"Suppression of self-excited vibrations in drive trains";
Vortrag: Ninth International Conference on Vibrations in Rotating Machinery,
Exeter, UK;
08.09.2008
- 10.09.2008.
Zusätzliche Informationen
-
H. Ecker, A. Tondl:
"On the suppression of flow-generated self-excited vibrations of a valve";
Vortrag: International Conference on Vibration Problems (ICOVP 2011),
Liberec;
05.09.2011
- 08.09.2011.
-
J. Edelmann:
"Influence of different drive concepts on powerslide";
Vortrag: MeccPhD-Lectures,
Politecnico di Milano (eingeladen);
21.09.2018.
-
J. Edelmann:
"Modellbildung des Lenkverhaltens von Radfahrern";
Vortrag: Mechatroniktag des Instituts für Mechanik und Mechatronik 2015,
Wien;
30.10.2015.
Zusätzliche Informationen
-
J. Edelmann:
"Modellbildung, Dynamik und Regelung eines dreirädrigen Kurvenneigers";
Vortrag: Seminar Mehrkörpersystemdynamik,
Regensburg (eingeladen);
10.12.2009.
-
J. Edelmann, M. Haudum, M. Plöchl:
"Coordination of guidance and stabilization tasks for bicycle rider modelling";
Vortrag: GAMM 2015 - 86th Annual Meeting of the International Association of Applied Mathematics and Mechanics,
University of Salento, Lecce, Italy;
23.03.2015
- 27.03.2015.
-
J. Edelmann, M. Plöchl:
"Analysis of controllability of automobiles at steady-state cornering considering different drive concepts";
Hauptvortrag: 25th International Symposium on Dynamics of Vehicles on Roads and Tracks (IAVSD2017),
Rockhampton, Australia;
14.08.2017
- 18.08.2017.
-
J. Edelmann, M. Plöchl:
"Controllability of the powerslide motion of an automobile with different actuation inputs";
Vortrag: Joint Annual Meeting of DMV and GAMM 2016,
Braunschweig;
07.03.2016
- 11.03.2016.
-
J. Edelmann, M. Plöchl:
"Electronic Stability Control of a Narrow Tilting Vehicle";
Vortrag: SAE World Congress 2011,
Detroit (eingeladen);
12.04.2011
- 14.04.2011.
-
J. Edelmann, M. Plöchl:
"Modal controllability and observability of different classes of vehicles";
Vortrag: GAMM 2017 - 88th Annual Meeting of the International Association of Applied Mathematics and Mechanics,
Weimar/DE;
06.03.2017
- 10.03.2017.
-
J. Edelmann, M. Plöchl, M. Gobbi, G. Mastinu, G. Previati:
"Friction Estimation at Tire-Ground Contact";
Vortrag: SAE 2015 World Congress,
Detroit;
21.04.2015
- 23.04.2015.
-
J. Edelmann, M. Plöchl, P. Lugner:
"MBS-Model and Dynamics of a Tilting Vehicle";
Vortrag: 7th EUROMECH Solid Mechanics Conference - ESMC 2009,
Lissabon (eingeladen);
07.09.2009
- 11.09.2009.
-
J. Edelmann, M. Plöchl, P. Lugner, W. Mack:
"Non-regular cornering of a vehicle system";
Vortrag: Non-Smooth Dynamics,
Wien (eingeladen);
11.06.2009
- 14.06.2009.
-
J. Edelmann, A. Steindl, M. Plöchl, G. Mastinu:
"Nonlinear stability analysis of an oversteer automobile";
Vortrag: GAMM 2019 - 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics,
Universität Wien, Austria;
18.02.2019
- 22.02.2019.
-
S. Eiser, M. Kaltenbacher, M. Nelhiebel:
"Non-conforming Meshes in Multi-scale Thermo-mechanical Finite Element Analysis of Semiconductor Power Devices";
Vortrag: 14th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems,
Wroclaw (eingeladen);
15.04.2013
- 17.04.2013.
-
N. Euler-Rolle, C. Mayr, C. Hametner, S. Jakubek:
"PID Controller Design for Nonlinear Systems Using Discrete-Time Local Model Networks";
Vortrag: 4. Workshop fuer Modellbasierte Kalibriermethoden,
TU Wien;
08.11.2013.
Zusätzliche Informationen
-
A. Falkner, W. Mack:
"Angepasste Modellierungstiefe in der Gesamtfahrzeugsimulation";
Vortrag: Mechatroniktag des Instituts für Mechanik und Mechatronik 2013,
Wien;
27.09.2013.
-
T. Ferhatbegovic, S. Hauer, I. Leobner, K. Ponweiser, A. Schirrer, M. Kozek:
"Thermal Building Modeling and Simulation for the Automated Load Shifting Purposes in the Non-Residential Building Sector";
Vortrag: 10th European Conference on Product & Process Modelling,
Wien;
17.09.2014
- 19.09.2014.
-
C. Freidhager, S. Schoder, M. Kaltenbacher:
"Aeroacoustics of automotive turbochargers";
Vortrag: Kolloquium Fluidenergiemaschinen,
Berlin (eingeladen);
06.03.2019
- 08.03.2019.
-
G. Fuchs:
"Reduction Techniques for Realtime Engine Models";
Vortrag: Workshop "Modellbasierte Kalibriermethoden",
Wien;
17.09.2010.
-
R. Haas, H.P. Degischer, P. Pongratz, J. Wassermann, A. Pyzalla:
"Violinsaiten: Nanostrukturiertes und Heterogenes Stahlgefüge";
Vortrag: 50. Metallkunde-Kolloquium,
Lech am Arlberg, Österreich;
14.04.2004
- 16.04.2004.
-
C. Hametner:
"Operating Regime Based Dynamic Engine Models";
Vortrag: Workshop "Modellbasierte Kalibriermethoden",
Wien;
17.09.2010.
-
C. Hametner, S. Jakubek:
"Online SoH/SoC-Schätzung von Li-Ionen Zellen durch nichtlineare Zustandsbeobachtung";
Vortrag: 4. Workshop fuer Modellbasierte Kalibriermethoden,
TU Wien;
08.11.2013.
-
C. Hametner, S. Jakubek:
"SoC-Schätzung von Li-Ionen Zellen: DoE, Identifikation, nichtlineare Zustandsbeobachtung";
Vortrag: 3. Workshop Modellbasierte Kalibriermethoden fuer Automotive-Systeme,
Wien;
22.11.2012.
-
C. Hametner, M. Kneissl, M. Dohr:
"Nonlinear system identification based on nonuniformly sampled data for battery state of health estimation";
Vortrag: 8th International Symposium on Energy,
Aberdeen, Scotland, UK (eingeladen);
06.08.2018
- 09.08.2018.
-
C. Hametner, W. Prochazka, A. Suljanovic, S. Jakubek:
"Data Driven Methodologies for State of Health Observer Design for Lithium Ion Cells";
Vortrag: 4th International Symposium on Energy Challenges & Mechanics,
Aberdeen, Scotland, UK (eingeladen);
11.08.2015
- 13.08.2015.
-
C. Hametner, J. Unger, M. Quasthoff:
"DoE und Identifikation von Lithium-Ionen Zellen";
Vortrag: 2. Workshop fuer Modellbasierte Kalibriermethoden,
TU Wien;
23.09.2011.
-
M. Han, P. Kopacek, B. Putz, E. Schierer, M. Würzl:
"Mobile Mini Robots";
Vortrag: 7th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines,
Madrid, Spain;
22.09.2004
- 24.09.2004.
-
E. Hansy-Staudigl, M. Krommer:
"Charge-controlled actuation of dielectric elastomers";
Vortrag: 3rd Seminar on Ferroic Functional Materials / 13th International Workshop on Direct and Inverse Problems in Piezoelectricity,
Kassel;
04.10.2017
- 06.10.2017.
Zusätzliche Informationen
-
E. Hansy-Staudigl, M. Krommer:
"Elektro-aktive Polymere als Aktoren in der Strukturmechanik";
Vortrag: Mechatroniktag 2017,
Wien;
24.11.2017.
-
E. Hansy-Staudigl, M. Krommer:
"Modelling of Dielectric Elastomers Accounting for Electrostriction by Means of a Multiplicative Decomposition of the Deformation Gradient Tensor";
Vortrag: 8th Int. Conference on Design, Modelling and Experiments of Advanced Structures and Systems - DeMEASS VIII,
Moscow;
21.05.2017
- 24.05.2017.
-
E. Hansy-Staudigl, M. Krommer:
"Nonlinear modeling of dielectric elastomer actuators accounting for elec- trostriction and polarisation saturation";
Vortrag: 1st International Conference on Mechanics of Advanced Materials and Structures (ICMAMS 2018),
Torino, Italy;
17.06.2018
- 20.06.2018.
-
E. Hansy-Staudigl, Y. Vetyukov, M. Krommer:
"Modelling the nonlinear response of thin electroelastic plates";
Vortrag: 7th International Symposium on Design, Modelling and Experiments of Advanced Structures and Smart Systems,
Radebeul, Germany;
10/2015.
-
M. Haskul, E. Arslan, W. Mack:
"Thermally loaded thick-walled cylindrically curved aluminum/steel-FGM-panel";
Vortrag: GAMM 2016,
Braunschweig/DE;
07.03.2016
- 11.03.2016.
-
M. Haudum, J. Edelmann, M. Plöchl, M. Höll:
"Vehicle state estimation from a sports-car application point of view focusing on handling dynamics";
Vortrag: 13th International Symposium on Advanced Vehicle Control,
München;
13.09.2016
- 16.09.2016.
-
M. Hirschmanner:
"Adaptive Kompensation von zirkulatorischen Anregungen am Beispiel eines 2FG-Rotors";
Vortrag: SIRM 2003, Schwingungen in rotierenden Machinen,
Darmstadt;
26.02.2003
- 28.02.2003.
Zusätzliche Informationen
-
M. Hirschmanner:
"Cross-coupling and Unbalance Compensation of a Rigid Rotor ";
Vortrag: GAMM 2002,
Augsburg;
25.03.2002
- 28.03.2002.
-
A. Hüppe, J. Grabinger, M. Kaltenbacher:
"A Nitsche Non-Conforming Finite Element Approach towards Computational Acoustics in Rotating Systems";
Vortrag: DAGA 2014, 40. Jahrestagung für Akustik,
Oldenburg (eingeladen);
10.03.2014
- 13.03.2014.
-
A. Hüppe, M. Kaltenbacher:
"Comparison of Source Term Formulations for Computational Aeroacoustics";
Vortrag: 19th AIAA/CEAS Aeroacoustics Conference,
Berlin (eingeladen);
27.05.2013
- 29.05.2013.
-
A. Humer, M. Krommer:
"Non-linear modeling of piezoelectric materials: a phenomenological approach to large deformation and hysteresis";
Vortrag: 1st International Conference on Mechanics of Advanced Materials and Structures (ICMAMS 2018),
Torino, Italy;
17.06.2018
- 20.06.2018.
-
A. Humer, M. Krommer, Y. Vetyukov:
"Nonlinear modeling of thin piezoelectric shells using an extended multiplicative decomposition of the deformation gradient";
Vortrag: 10th International Workshop in Direct and Inverse Problems on Piezoelectricity,
Vienna;
21.09.2014
- 24.09.2014.
-
H. Husstedt, U. Ausserlechner, M. Kaltenbacher:
"Accurate measurement of magnetic fields w.r.t. the geometry of the field source";
Vortrag: CMOS Emerging Technologies Meeting 2011,
Whistler (eingeladen);
15.06.2011
- 17.06.2011.
-
H. Husstedt, U. Ausserlechner, M. Kaltenbacher:
"Array of 12 coils to measure the position, alignment, and sensitivity of magnetic sensors over temperature";
Vortrag: 56th Annual Conference on Magnetism and Magnetic Materials,
Scottsdale, Arizona, USA;
30.10.2011
- 03.11.2011.
-
H. Husstedt, M. Kaltenbacher:
"Detailed Analysis of Permanent Magnets by means of Free Field Measurements";
Poster: 58th Annual Conference on Magnetism and Magnetic Materials,
Denver, Colorado, USA;
04.11.2013
- 08.11.2013.
-
H Irschik, M. Krommer, Ch. Zehetner:
"Shape Control by PZT";
Hauptvortrag: Symposium P - Embodying Intelligence in Structures and Integrated Systems - 5th International Conference Smart and Multifunctional Materials, Structures and Systems - CIMTEC 2016,
Perugia, Italy;
05.06.2016
- 09.06.2016.
-
S. Jakubek, G. Aschauer, A. Schirrer, W. Tenschert, C. Saliger:
"Hardware-in-the-loop Prüfstand für Stromabnehmer von Hochgeschwindigkeitszügen mit Emulation der Oberleitungsdynamik";
Vortrag: Mechatroniktag des Instituts für Mechanik und Mechatronik 2015,
Wien;
30.10.2015.
Zusätzliche Informationen
-
S. Jakubek, C. Hametner:
"On the potential of constraints in nonlinear system identification";
Vortrag: Russia - Austria Joint Workshop on Advanced Dynamics and Model Based Control of Structures and Machines,
Linz (eingeladen);
25.04.2010
- 28.04.2010.
Zusätzliche Informationen
-
S. Jakubek, M. Kozek, A. Schulz, J. Wassermann:
"Regelungstechnik und Mechatronik im Plusenergiehaus";
Vortrag: Plusenergiehäuser der Zukunft, Informationsveranstaltung für Firmen der TU-Wien in Kooperation mit der Wirtschaftskammer Wien zum Stand der Technik an der TU Wien im Bereich der "energieaktiven Siedlungen",
Wien;
16.04.2010.
-
M. Jirout, P. Lugner, W. Mack:
"Dynamic simulation of the contact forces in the transmission link of a magnetic track-brake in low suspension";
Vortrag: 10th Mini-Symposium on Vehicle System Dynamics, Identification and Anomalies (VSDIA),
Budapest;
06.10.2006
- 08.10.2006.
-
M. Jirout, W. Mack, P. Lugner:
"Non-Smooth Dynamics of a Magnetic Track Brake";
Vortrag: Non-Smooth Dynamics,
Wien (eingeladen);
11.06.2009
- 14.06.2009.
-
T. Kästenbauer, J. Wassermann, K. Irsigler:
"Messung der Tragedauer von Diabetikerschuhen";
Poster: Tagung der österr. Diabetikergesellschaft 2003,
Graz;
27.11.2003
- 29.11.2003.
-
M. Kaltenbacher:
"Non-Conforming Grids for Flexible Discretization with Applications to Computational Acoustics";
Vortrag: Chemnitz FEM-Symposium 2016,
Chemnitz;
26.09.2016
- 28.09.2016.
-
M. Kaltenbacher:
"Physiology and physics of voice production";
Vortrag: Interspeech 2019,
Graz;
15.09.2019
- 19.09.2019.
Zusätzliche Informationen
-
M. Kaltenbacher, A. Hüppe:
"Comparison of aeroacoustic source term formulations";
Vortrag: DAGA 2014, 40. Jahrestagung für Akustik,
Oldenburg (eingeladen);
10.03.2014
- 13.03.2014.
-
M. Kaltenbacher, A. Hüppe, B. Wohlmuth:
"Flexible Discretization for Computational Acoustics";
Vortrag: AIA-DAGA 2013,
Meran (eingeladen);
18.03.2013
- 21.03.2013.
-
M. Kaltenbacher, A. Hüppe, B. Wohlmuth, H. Kuehnelt:
"Coupling Acoustic Pertubation Equations and Pierce Wave Equation for Computational Aeroacoustics";
Vortrag: 19th AIAA/CEAS Aeroacoustics Conference,
Berlin (eingeladen);
27.05.2013
- 29.05.2013.
-
M. Kaltenbacher, A. Hüppe, S. Zörner:
"Computational Aeroacoustics of Human Phonation";
Vortrag: The 8th International Conference on Voice Physiology and Biomechanics,
Erlangen (eingeladen);
05.07.2012
- 07.07.2012.
-
M. Kaltenbacher, A. Hüppe, S. Zörner, S. Becker, S. Müller:
"Computational Environment for Fluid-Strucure-Acoustic Interaction";
Vortrag: International Styrian Noise, Vibration & Harshness Congress,
Graz (eingeladen);
02.07.2014
- 04.07.2014.
-
M. Kaltenbacher, B. Kaltenbacher, S. Gombots:
"Inverse Scheme for Acoustic Source Localization using Microphone Measurements and Finite Element Simulations";
Vortrag: 7th AAAA Congress on sound and vibration,
Ljubljana (eingeladen);
22.09.2016
- 23.09.2016.
-
M. Kaltenbacher, S. Schoder:
"Aeroacoustic formulation based on compressible flow data";
Vortrag: DAGA 2019,
Rostock (eingeladen);
18.03.2019
- 21.03.2019.
-
M. Kaltenbacher, S. Schoder:
"Hybrid Formulations for Computational Aeroacoustics";
Vortrag: DAGA München 2018,
München;
19.03.2018
- 22.03.2018.
-
M. Kaltenbacher, S. Schoder:
"Physiology and physics of voice production";
Vortrag: 3. Tagung der Österreichischen Gesellschaft für Akustik,
Wien (eingeladen);
18.11.2019.
-
M. Kaltenbacher, K. Shaposhnikov, P. Nicolay:
"Finite Element Scheme for SAW Unit-Cell-Simulation";
Vortrag: AMA Conferences 2017,
Nürnberg;
30.05.2017
- 01.06.2017.
-
M. Kaltenbacher, F. Toth, H. Hassanpour Guilvaiee:
"Advanced finite element formulation for viscothermal acoustics";
Vortrag: GAMM 2019 - 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics,
Universität Wien, Austria;
18.02.2019
- 22.02.2019.
-
M. Kaltenbacher, S. Triebenbacher:
"Advanced Finite Element Schemes for Multiphysics";
Vortrag: AMA Conferences 2013,
Nürnberg (eingeladen);
14.05.2013
- 16.05.2013.
-
M. Kaltenbacher, A. Volk, M. Ertl:
"Anisotropic model for the numerical computation of magnetostriction in grain-oriented electrical steel sheets";
Vortrag: AMA Conferences 2013,
Nürnberg (eingeladen);
14.05.2013
- 16.05.2013.
-
T. Katrasnik, R. Heinzle, Maxime Deregnaucourt, J. Wurzenberger:
"System Level Engine Modeling - Physical Depth vs. Computational Speed";
Vortrag: 3. Workshop Modellbasierte Kalibriermethoden fuer Automotive-Systeme,
Wien;
22.11.2012.
-
M. Killian:
"Case Study Forschung: Regelungskonzept für das Haus der Zukunft";
Hauptvortrag: energy2050,
Fuschl am See (eingeladen);
27.09.2017
- 29.09.2017.
-
M. Killian:
"Cooperative fuzzy model predictive control of a multi-zone o ffice building";
Vortrag: 2nd Vienna young Scientists Symposium,
Wien (eingeladen);
09.06.2016
- 10.06.2016.
-
M. Killian:
"Ein Haus, das in die Zukunft blickt";
Vortrag: zero emission cities 2016: building the future - future buildings (ZEC 2016),
Rathaus/Festsaal Wien (eingeladen);
24.10.2016.
Zusätzliche Informationen
-
M. Killian:
"IntelliEE-Home: Energieoptimierung im Einfamilienhaus";
Vortrag: evon up2date 2016,
Stubenberg am See (eingeladen);
22.06.2016.
-
M. Killian:
"intelliEE-Home: evonHOME noch smarter";
Vortrag: evon up2date 2017,
Stubenberg am See (eingeladen);
21.06.2017.
-
M. Killian, M. Kozek:
"Energieeffizientes prädiktives Regelungskonzept für ein modernes multi-zonen Bürogebäude (SmartMSR)";
Vortrag: Blickpunkt Forschung: Energie@TU Wien,
Wien;
17.10.2016.
Zusätzliche Informationen
-
F. Klinger, J. Edelmann, M. Plöchl:
"Feedback and feedforward control concepts to improve road holding for passenger cars";
Vortrag: GAMM 2019 - 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics,
Universität Wien, Austria;
18.02.2019
- 22.02.2019.
-
F. Klinger, J. Edelmann, M. Plöchl, S. Jeindl:
"Effects of different excitation spectra on virtual suspension damper design";
Vortrag: 24th International Symposium on Dynamics of Vehicles on Roads and Tracks (IAVSD2015),
Graz;
17.08.2015
- 21.08.2015.
-
T. Kniffka, H. Ecker:
"Observations regarding numerical results obtained by the Floquet-method";
Vortrag: DETC2013 - ASME 2013 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference,
Portland, OR;
04.08.2013
- 07.08.2013.
Zusätzliche Informationen
-
H. Köck, S. Filippis, M. Nelhiebel, M. Glavanovics, M. Kaltenbacher:
"Multiscale FE Modeling Concepts applied to Microelectronic Device Simulations";
Vortrag: 14th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems,
Wroclaw (eingeladen);
15.04.2013
- 17.04.2013.
-
M. Kozek:
"Grundlagenforschung: Kreativität versus Projekt-Management?";
Vortrag: f&e symposium '08,
Wien (eingeladen);
27.11.2008.
-
M. Kozek:
"Hybrid models for closed loop control and Process optimization";
Vortrag: Hybrid Modeling Summer School,
University of Life Science and Natural Resources (eingeladen);
05.07.2017
- 07.07.2017.
-
M. Kozek:
"Model Predictive Control Implementation in a Moving Grate Biomass Furnace - Challenges and Pitfalls";
Vortrag: Practical control problems and advanced solutions in the energy industry,
Budapest (eingeladen);
10.05.2012
- 11.05.2012.
Zusätzliche Informationen
-
M. Kozek:
"Modellprädiktive Regelung im Projekt CoOpt";
Vortrag: Dritte Fachkonferenz Kommunikation für Energiesysteme: ComForEn 2012,
Wels (eingeladen);
05.09.2012
- 06.09.2012.
Zusätzliche Informationen
-
M. Kozek, C. Benatzky:
"Aktive Schwingungsdämpfung durch Regelung elastischer Fahrzeugstrukturen";
Vortrag: ISB - Vernetzungsworkshop am 15.01.07 in der WKÖ,
Bundeswirtschaftskammer Österreich, Wien;
15.01.2007.
-
M. Kozek, A. Schirrer, C. Benatzky:
"Robust Control Design and Validation";
Vortrag: SICON TC2 Event,
Wien (eingeladen);
18.02.2008
- 22.02.2008.
Zusätzliche Informationen
-
M. Kozek, A. Schirrer, C. Benatzky, H. Jörgl:
"Active Vibration Control of Flexible Rail Car Bodies: Problem Statement, Modeling, Controller Design";
Vortrag: SICON TC2 Event,
Wien (eingeladen);
18.02.2008
- 22.02.2008.
Zusätzliche Informationen
-
M. Kozek, A. Schirrer, S. Jakubek:
"Robust convex synthesis for lateral feedback control of a blended wing body aircraft";
Vortrag: International Conference on Advanced Dynamics and Model Based Control of Structures and Machines,
St.Petersburg, Russia (eingeladen);
01.07.2012
- 04.07.2012.
-
M. Krommer:
"Dielectric elastomer shells: constitutive modeling and numerical implementation";
Vortrag: 3rd International Workshop on Advanced Dynamics and Model Based Control of Structures and Machines,
Perm;
18.09.2017
- 22.09.2017.
-
M. Krommer:
"Neuere Arbeiten zu nichtlokalen und nichtlinearen elektromechanisch gekoppelten dünnen Platten und Schale";
Vortrag: ACCM Lecture series Research and Education in Advanced Dynamics and Model Based Control of Structures and Machines,
Linz, Austria;
27.10.2014.
-
M. Krommer:
"Nonlinear electro-elastic shells: Modelling and stability analysis";
Vortrag: 13th International Conference on Theoretical and Computational Acoustics , ICTCA 2017,
Vienna (eingeladen);
30.07.2017
- 03.08.2017.
Zusätzliche Informationen
-
M. Krommer:
"On Nonlocal and Nonlinear Electromechanically Coupled Thin Plates and Shells";
Vortrag: Kolloquium über Neuere Arbeiten Auf Dem Gebiete Der Mechanik Und Strömungslehre,
Vienna, Austria;
09.04.2014.
-
M. Krommer:
"Panel report on EACS - European Association for the Control of Structures";
Hauptvortrag: 7th International Workshop on Structural Control and Monitoring,
Incheon, Korea;
25.07.2016.
-
M. Krommer, E. Hansy-Staudigl, Y. Vetyukov:
"Nonlinear modeling and analysis of electro-active plates: Stability, post-buckling behavior and nonlinear vibrations";
Hauptvortrag: Symposium P - Embodying Intelligence in Structures and Integrated Systems - 5th International Conference Smart and Multifunctional Materials, Structures and Systems - CIMTEC 2016,
Perugia, Italy;
05.06.2016
- 09.06.2016.
-
M. Krommer, H Irschik:
"Design of Piezoelectric Sensors for Structural and Health Monitoring based on the Principle of Virtual Work";
Hauptvortrag: 6th ECCOMAS Thematic Conference on Smart Structures and Materials (SMART2013),
Torino, Italy;
24.06.2013
- 26.06.2013.
-
M. Krommer, H Irschik, Y. Vetyukov, A. Steindl:
"Modelling and Analysis of Nonlocal and Nonlinear Electromechanically Coupled Thin Plates and Shells";
Vortrag: Euromech Colloquium 562: Stability and control of nonlinear vibrating systems,
Sperlonga;
25.05.2015
- 29.05.2015.
-
M. Krommer, M. Kaltenbacher, S. Jakubek, H. Schmiedmayer:
"Mechanik: Grundlage moderner mechatronischer Systeme";
Vortrag: 200 Jahre Mechanik an der TU Wien,
Wien;
04.11.2016.
-
M. Krommer, M. Zellhofer:
"On the Use of Nilpotent Transducers for the Detection of Local Damage in Mechanical Structures: Theory and Application to Frame Structures";
Vortrag: 6th World Conference on Structural Control and Monitoring (6WCSCM),
Barcelona, Spain;
15.07.2014
- 17.07.2014.
-
D. Kuzdas, D. Murschenhofer, S. Braun, S. Jakubek:
"Quasi-two dimensional fluid dynamical proton exchange membrane fuel cell model solved with spectral methods - part 1";
Vortrag: 11th European Fluid Mechanics Conference,
Sevilla/ES;
12.09.2016
- 16.09.2016.
Zusätzliche Informationen
-
R. Lernbeiss, M. Plöchl, P. Lugner:
"Simulation of gear-walk phenomena on aircraft landing gears";
Vortrag: 10th Mini-Symposium on Vehicle System Dynamics, Identification and Anomalies (VSDIA),
Budapest;
06.10.2006
- 08.10.2006.
-
P. Lugner:
"The Scientist Willi Kortüm";
Vortrag: Euromech 452 "Advances in Simulation Techniques for Applied Dynamics",
Halle, Deutschland (eingeladen);
01.03.2004
- 04.03.2004.
-
P. Lugner:
"Tyre Model Performance Test (TMPT)";
Vortrag: Tyre Models for Vehicle Dynamics Analysis,
Wien (eingeladen);
29.08.2004
- 31.08.2004.
-
P. Lugner, H. Pacejka, M. Plöchl:
"Recent advances in tyre models and testing procedures";
Vortrag: Symposium of the International Association of Vehicle System Dynamics,
Mailand (eingeladen);
29.08.2005
- 03.09.2005.
-
P. Lugner, M. Plöchl:
"Comparison of different tire models and their application for vehicle system dynamics";
Vortrag: Tire Technology Expo 2009,
Hamburg (eingeladen);
17.02.2009
- 19.02.2009.
-
K. Makihara:
"Comparison of open-loop stiffness control methods to suppress self-excited vibrations";
Vortrag: 1st International Industrial Simulation Conference ISC'2003,
Valencia, Spain;
09.06.2003
- 11.06.2003.
-
K. Makihara:
"Semi-active vibration suppression of space structures based on energy-recycling method";
Vortrag: Dynamics of Machines 2003,
Prague;
11.02.2003
- 12.02.2003.
-
M. Mayer, B. Mayer, M. Killian, M. Kozek:
"Nichtlineare hierarchische modellprädiktive Klimaregelung für komplexe Gebäude";
Vortrag: Mechatroniktag des Instituts für Mechanik und Mechatronik 2015,
Wien;
30.09.2013.
Zusätzliche Informationen
-
C. Mayr:
"Stabilitätsuntersuchung bei lokalen Modellnetzen";
Vortrag: Workshop "Modellbasierte Kalibriermethoden",
Wien;
17.09.2010.
Zusätzliche Informationen
-
C. Mayr, C. Hametner, M. Kozek, S. Jakubek:
"Parametrierung von ECU Reglerstrukturen unter Berücksichtigung von Performance und Stabilität";
Vortrag: 3. Workshop Modellbasierte Kalibriermethoden fuer Automotive-Systeme,
Wien;
22.11.2012.
-
C. Mayr, M. Kozek, S. Jakubek:
"PID Reglersynthese mit lokalen Modellnetzwerken";
Vortrag: 2. Workshop fuer Modellbasierte Kalibriermethoden,
TU Wien;
23.09.2011.
Zusätzliche Informationen
-
D. Murschenhofer, D. Kuzdas, S. Braun, S. Jakubek:
"Numerical treatment of an unsteady quasi-2D proton exchange membrane fuel cell model";
Vortrag: ERCOFTAC ADA Pilot Center Meeting,
Linz/AT;
11.11.2016.
-
D. Murschenhofer, D. Kuzdas, S. Braun, S. Jakubek:
"Quasi-two dimensional fluid dynamical proton exchange membrane fuel cell model solved with spectral methods - part 2";
Vortrag: 11th European Fluid Mechanics Conference,
Sevilla/ES;
12.09.2016
- 16.09.2016.
-
D. Perchtold, H. Husstedt, M. Kaltenbacher:
"Testing of Thin Permanent Magnets at Higher Frequencies";
Poster: The 16th Biennial IEEE Conference on Electromagnetic Field Computation,
Annecy;
25.05.2014
- 28.05.2014.
-
B. Petermeier, H. Springer:
"Active bearing unit for damping of bending vibrations in rotating machinery";
Vortrag: Ninth International Conference on Vibrations in Rotating Machinery,
Exeter, UK;
08.09.2008
- 10.09.2008.
-
Ch. Pittner, J. Edelmann, M. Plöchl:
"Reference models for Torque-vectoring in Electric Vehicles";
Vortrag: 16th Mini Conference on Vehicle System Dynamics, Identification and Anomalies,
Budapest, Ungarn;
05.11.2018
- 07.11.2018.
-
M. Plöchl:
"Fahrermodelle und deren Anwendung in der Automobilsimulation";
Vortrag: Magna Steyr - Fahrzeugdynamiksimulation,
Graz (eingeladen);
13.11.2007.
Zusätzliche Informationen
-
M. Plöchl:
"Regelungskonzept zur Beeinflussung der Fahrdynamik bei kritischen Fahrmanövern durch aktive Stelleingriffe an den Rädern";
Vortrag: Seminarreihe am Deutschen Zentrum für Luft- und Raumfahrt,
Oberpfaffenhofen (eingeladen);
05.07.2002.
-
M. Plöchl:
"Simulation of the landing gear of an aeroplane considering the elastic properties of the shock strut";
Vortrag: Dynamics Seminar,
University of Nottingham (eingeladen);
26.03.2004.
-
M. Plöchl, J. Edelmann:
"Driver models in automobile dynamics application";
Hauptvortrag: Symposium of the International Association of Vehicle System Dynamics,
Berkeley, USA (eingeladen);
13.08.2007
- 17.08.2007.
-
M. Plöchl, J. Edelmann:
"Fahrraddynamik - Vom Laufrad zum e-bike";
Vortrag: VDI-Vortragsreihe,
München (eingeladen);
27.03.2018.
-
M. Plöchl, J. Edelmann:
"Zur Dynamik des Fahrrads: Fahrradfahren und das dynamische Verhalten des Fahrrads";
Vortrag: Fachtagung TMB - Finite Elemente und Simulation,
Hollabrunn;
11.03.2015
- 13.03.2015.
-
M. Plöchl, J. Edelmann, M. Höll:
"Combined vehicle state and road condition estimation";
Vortrag: Tongji Porsche Engineering Symposium,
Shanghai, China;
21.11.2018.
-
S. Popprath, H. Ecker:
"Nonlinear dynamics of a rotor contacting an elastically suspended stator";
Vortrag: 1st International Conference on Vibro-Impact Systems,
Loughborough, UK;
20.07.2006
- 22.07.2006.
Zusätzliche Informationen
-
S. Popprath, J. Wassermann, G. Schabl:
"Versuchseinrichtung zur Prüfung von Fahrzeubauteilen";
Vortrag: Innovatives System Bahn (ISB) - Vernetzungsworkshop 2006,
Wien (eingeladen);
17.05.2006
- 18.05.2006.
-
G. Previati, M. Gobbi, G. Mastinu, S. Dell´Agostino, J. Edelmann, M. Plöchl:
"Friction estimation at tyre-ground contact based on the Gough-plot for safe autonomous vehicles";
Vortrag: 24th International Symposium on Dynamics of Vehicles on Roads and Tracks (IAVSD2015),
Graz;
17.08.2015
- 21.08.2015.
-
R. Priesner, S. Jakubek:
"Impedance Control of Rotating Machinery";
Vortrag: Internationale Tagung Schwingungen in rotierenden Maschinen (SIRM 2013),
Berlin;
25.02.2013
- 27.02.2013.
Zusätzliche Informationen
-
R. Priesner, C. Westermayer, S. Jakubek, R. Bauer:
"Predictive Control With Active Disturbance Rejection for Elastic Drive Systems";
Vortrag: ICIEA 2012,
Singapur;
18.07.2012
- 20.07.2012.
Zusätzliche Informationen
-
T. Pumhössel:
"Active damping of vibrations of a cantilever beam by axial force control";
Vortrag: 2007 ASME International Design Engineering Technical Conferences (DETC2007),
Las Vegas/NV;
04.09.2007
- 07.09.2007.
-
D. Ritzberger, S. Jakubek, C. Hametner, J. Höflinger, S. Pofahl, A. Schenk:
"Dynamic Fuel Cell Stack Modeling for Control: Data-driven Identification and Experiment Design";
Vortrag: Mechatroniktag 2019-IMM,
TU-WIEN | TUtheSky (eingeladen);
15.11.2019.
-
K. Roppert, F. Toth, M. Kaltenbacher:
"Using harmonic balancing to simulate induction heating processes";
Vortrag: HES Symposium,
Padua;
22.05.2019
- 24.05.2019.
Zusätzliche Informationen
-
K. Roppert, F. Toth, M. Kaltenbacher, M. Proschek:
"Induktive Erwärmung von bewegten Stahlbändern";
Vortrag: Mechatroniktag des Instituts für Mechanik und Mechatronik,
Wien;
15.11.2019.
-
A. Schirrer, F. Hochwallner, J. Mayrhofer, S. Jakubek:
"Extended-Kalman-based Disturbance Estimator for MPC in a drive train test rig with a nonlinear elastomer coupling";
Vortrag: 4th International Workshop on Advanced Dynamics and Model Based Control of Structures and Machines,
JKU Linz (eingeladen);
22.09.2019
- 25.09.2019.
Zusätzliche Informationen
-
A. Schirrer, S. Jakubek:
"Hochdynamische Oberleitungs-Emulation eines Pantographenprüfstandes: Modellierungs- und Regelkonzepte";
Vortrag: 49. Regelungstechnisches Kolloquium in Boppard,
Boppard;
04.03.2015
- 06.03.2015.
Zusätzliche Informationen
-
A. Schirrer, M. Kozek, C. Benatzky:
"Extension of the control concepts: Optimization and implementation";
Vortrag: SICON TC2 Event,
Wien (eingeladen);
18.02.2008
- 22.02.2008.
Zusätzliche Informationen
-
E. Schmidt, M. Kaltenbacher, A. Wolfschluckner:
"About Accuracy and Influence of the Pole Coverage for Eddy Current Losses within Permanent Magnets of Electrical Machines";
Vortrag: INTERMAG,
Singapore;
23.04.2018
- 27.04.2018.
Zusätzliche Informationen
-
E. Schmidt, M. Kaltenbacher, A. Wolfschluckner:
"Eddy Current Losses in Permanent Magnets of Permanent Magnet Synchronous Machines Comparison between Finite Elemente and Analytical Calculation Methods";
Vortrag: 19th International Conference on the Computation of Electromagnetic Fields,
Budapest (eingeladen);
30.06.2013.
-
H. Schmiedmayer:
"Geringerer Personalaufwand bei steigender Qualität in der Lehre - wie geht das?";
Vortrag: Impuls e-Learning,
Wien (eingeladen);
14.01.2010.
-
S. Schoder:
"Acoustics: Source Localization and acoustic absorbers";
Vortrag: Doosan Bobcat Internal Conference & Joint Workshop with the Group on Fluids Mechanics led by the Mathematical Institute of the Czech Academy of Sciences,
Dobřís (eingeladen);
19.11.2019
- 21.11.2019.
-
S. Schoder:
"Aeroacosutic lessons learned from axial fan modeling and meausurements";
Vortrag: Doosan Bobcat Internal Conference & Joint Workshop with the Group on Fluids Mechanics led by the Mathematical Institute of the Czech Academy of Sciences,
Dobrís (eingeladen);
19.11.2019
- 21.11.2019.
-
S. Schoder:
"Strömungsakustische Analogien basierend auf kompressiblen Strömungsdaten";
Vortrag: Dr. Ernst Fehrer Preis,
Wien (eingeladen);
07.10.2019.
-
S. Schoder, C. Freidhager, M. Heinisch, M. Kaltenbacher:
"Aeroakustik von Turboladern im Automobilbereich";
Vortrag: Mechatroniktag des Instituts für Mechanik und Mechatronik,
Wien (eingeladen);
15.11.2019.
-
S. Schoder, C. Freidhager, M. Kaltenbacher:
"CAA of Rotating Systems";
Poster: 3. Tagung der Österreichischen Gesellschaft für Akustik,
Wien (eingeladen);
18.11.2019.
-
S. Schoder, C. Freidhager, M. Kaltenbacher:
"Helmholtz decomposition of compressible flow data at Mach 0.8";
Vortrag: 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019),
Vienna;
18.02.2019
- 22.02.2019.
-
S. Schoder, M. Kaltenbacher:
"Aeroacoustic Investigation of a cavity with a lip using Helmholtz decomposition of the ow eld";
Vortrag: 7th AAAA Congress on sound and vibration,
Ljubljana;
22.09.2016
- 23.09.2016.
-
S. Schoder, M. Kaltenbacher:
"Radial Basis Function Interpolation for Hybrid Aeroacoustic Methodologies";
Vortrag: 4. Workshop "Strömungsschall in Luftfahrt, Fahrzeug- und Anlagentechnik",
Wien;
15.11.2017
- 16.11.2017.
-
S. Schoder, M. Weitz, M. Kaltenbacher:
"Accurate and Efficient Interpolation of Acoustic Source Terms";
Poster: DEGA Akademie,
Erlangen (eingeladen);
09/2018.
-
A. Schulz:
"Das Projekt Flywheel";
Vortrag: Österreichische Photovoltaik Fachtagung mit "Haus der Zukunft"-Schwerpunkt,
Wien (eingeladen);
20.10.2013
- 21.10.2013.
-
A. Schulz:
"Hocheffiziente und zuverlässige Schwungradspeicher - Konzept, Auslegung, Simulation und Anwendung";
Vortrag: Mechatroniktag des Instituts für Mechanik und Mechatronik 2013,
Wien;
27.09.2013.
-
A. Schulz:
"Hocheffiziente und zuverlässige Schwungradspeicher - Neue Ansätze zur Erhöhung der Sicherheit und der wirtschaftlich nutzbaren Speicherzeit";
Vortrag: Regelungstechnik Workshop 2012,
Wien;
03.12.2012.
-
A. Schulz, J. Wassermann:
"Aktives Magnetlagersystem hoher Betriebssicherheit";
Vortrag: Workshop Magnetlager,
Johannes Kepler Universität (JKU) Linz;
28.05.2003.
-
P. Seebacher, M. Kaltenbacher, F. Wein, H. Lehmann:
"Nonlinear Topology-Optimization in Electromagnetism";
Poster: PhD. course - Topology Optimization - Theory, Methods and Applications,
Dänemark;
19.06.2019
- 25.06.2019.
-
P. Seebacher, M. Kaltenbacher, F. Wein, H. Lehmann:
"Optimization of an Electromagnetic Actuator using Topology-Optimization";
Poster: COMPUMAG 2019,
Paris;
15.07.2019
- 19.07.2019.
-
D. Spemann, T. Reinert, J. Vogt, J. Wassermann, T. Butz:
"Active Compensation of Magnetic Stray Fields at LIPSION";
Poster: 8th International Conference on Nuclear Microprobe Technology & Application, ICNMTA 2002,
Takasaki, Japan;
08.09.2002
- 13.09.2002.
-
H. Springer:
"Active parametric vibration control of a smart beam";
Vortrag: Eighth International Conference on Vibrations in Rotating Machinery,
Swansea, UK;
07.09.2004
- 09.09.2004.
-
M. Stadlbauer:
"Strategien für optimierte dynamische Versuchsplanung";
Vortrag: Workshop "Modellbasierte Kalibriermethoden",
Wien;
17.09.2010.
-
M. Stadlbauer, C. Hametner, S. Jakubek:
"Online DoE mit Evolving Local Model Networks";
Vortrag: 3. Workshop Modellbasierte Kalibriermethoden fuer Automotive-Systeme,
Wien;
22.11.2012.
-
M. Stadlbauer, T. Winsel:
"Optimales Design of Experiments mit lokalen Modellnetzwerken unter Beschraenkungen";
Vortrag: 2. Workshop fuer Modellbasierte Kalibriermethoden,
TU Wien;
23.09.2011.
-
A. Steindl:
"Birth of a Shilnikov orbit in a Hopf-Takens-Bogdanov interaction";
Vortrag: Exploiting Nonlinear Dynamics for Engineering Systems,
Novi Sad;
15.07.2018
- 19.07.2018.
Zusätzliche Informationen
-
A. Steindl:
"DNS-curves in a Production/Inventory Model";
Vortrag: 23rd European Conference on Operational Research,
Bonn;
05.07.2009
- 08.07.2009.
Zusätzliche Informationen
-
A. Steindl:
"Influence of Kelvin-Voigt Damping on the Existence and Stability of Travelling Wave Solutions";
Vortrag: MATHMOD 2012 - 7th Vienna International Conference on Mathematical Modelling,
Wien/AT;
15.02.2012
- 17.02.2012.
Zusätzliche Informationen
-
A. Steindl:
"Is the Sky-tower stable?";
Vortrag: ÖMG Tagung 2003,
Bozen;
22.09.2003
- 26.09.2003.
Zusätzliche Informationen
-
A. Steindl:
"Loss of stability of a visco-elastic belt drive";
Vortrag: 10th European Solid Mechanics Conference, Bologna,
Bologna;
02.07.2018
- 06.07.2018.
Zusätzliche Informationen
-
A. Steindl:
"Loss of Stability of Slow Motions in a Stiff Oscillatory System";
Vortrag: 2009 SIAM Conference on Applications of Dynamical Systems,
Snowbird;
17.05.2009
- 21.05.2009.
Zusätzliche Informationen
-
A. Steindl:
"Numerical Calculation of Slip-Stick Rotating Waves Caused by Coulomb Friction";
Vortrag: 8th European Solid Mechanics Conference (ESMC 2012),
Graz;
09.07.2012
- 13.07.2012.
Zusätzliche Informationen
-
A. Steindl:
"Oscillatory behaviour of travelling waves in a brake-like system";
Vortrag: CLASSICAL PROBLEMS OF RIGID BODY DYNAMICS,
Donetsk, Ukraine (eingeladen);
09.06.2007
- 13.06.2007.
Zusätzliche Informationen
-
A. Steindl:
"Resonance in the Hopf-Hopf interaction of a spatial fluid conveying tube";
Vortrag: ECCOMAS 2012 (European Congress on Computational Methods in Applied Sciences and Engineering,
Wien;
10.09.2012
- 14.09.2012.
Zusätzliche Informationen
-
A. Steindl:
"Stabilization of a tethered satellite system by tension control";
Vortrag: Dynamics Days Europe 2018,
Loughborough;
03.09.2018
- 07.09.2018.
Zusätzliche Informationen
-
A. Steindl:
"Time optimal control of the deployment of a tethered satellite allowing for tether oscillations";
Vortrag: Euromech Colloquium 562: Stability and control of nonlinear vibrating systems,
Sperlonga;
25.05.2015
- 29.05.2015.
-
A. Steindl:
"Time optimal control of the deployment of a tethered satellite with a massive tether";
Vortrag: 2nd International Workshop on Advanced Dynamics and Model Based Control of Structures and Machines,
Wien;
21.09.2015
- 23.09.2015.
-
A. Steindl:
"Time-optimal control of the deployment of a tethered satellite";
Vortrag: Eulog 2016,
Wien;
14.09.2016
- 16.09.2016.
Zusätzliche Informationen
-
A. Steindl, J. Edelmann, M. Plöchl:
"Slow-fast dynamics of an oversteer vehicle";
Vortrag: NODYCON 2021,
Rom;
16.02.2021
- 19.02.2021.
Zusätzliche Informationen
-
A. Steindl, J. Edelmann, M. Plöchl:
"Stability of the driver-vehicle system with throttle control";
Vortrag: 25th International Congress of Theoretical and Applied Mechanics (ICTAM 2020+1),
Milano, Italy;
22.08.2021
- 27.08.2021.
Zusätzliche Informationen
-
A. Steindl, R. Jurisits:
"1 : 3-resonant Hopf bifurcation of a fluid conveying tube";
Vortrag: EUROMECH 532 - 1st International Colloquium on Time-periodic Systems,
Frankfurt;
27.08.2012
- 30.08.2012.
Zusätzliche Informationen
-
A. Steindl, A. Teufel:
"Instabilities of Travelling Waves in a Brake-Like System";
Vortrag: SIAM Conference on Applications of Dynamical Systems (DS07),
Snowbird, Utah, USA;
28.05.2007
- 01.06.2007.
Zusätzliche Informationen
-
A. Steindl, H. Troger:
"Dimension reduction: comparison between dissipative and conservative systems";
Vortrag: Euromech Colloquium 503: Nonlinear Normal Modes, Dimension Reduction and Localization in Vibrating Systems,
Frascati;
27.09.2009
- 01.10.2009.
-
A. Steindl, H. Troger:
"Invariant manifolds in the dimension reduction for fluid conveying tubes";
Hauptvortrag: Workshop Principal manifolds for data cartography and dimension reduction,
Leicester, GB;
24.08.2006
- 26.08.2006.
-
A. Steindl, Y. Vetyukov:
"Nonlinear Oscillations of a Belt Drive";
Vortrag: 24th International Congress on Theoretical and Applied Mechanics (ICTAM 2016),
Montréal, Canada;
21.08.2016
- 26.08.2016.
Zusätzliche Informationen
-
D. Tippelt, J. Edelmann, M. Plöchl, M. Jirout:
"Analysis of self-excited vibrations of an electromagnetic track brake";
Vortrag: 26th International Symposium on Dynamics of Vehicles on Roads and Tracks (IAVSD2019),
Gothenburg;
12.08.2019
- 16.08.2019.
-
A. Tondl, R. Nabergoj, H. Ecker:
"Quenching of self-excited vibrations in a system with two unstable vibration modes";
Poster: Seventh International Conference on Vibration Problems (ICOVP-2005),
Sile, Turkey;
05.09.2005
- 09.09.2005.
-
F. Toth, M. Dorfmeister, U. Schmid, M. Kaltenbacher, M. Schneider:
"Non-Linear Dynamics of a Circular Piezoelectric Multi-Layer Plate";
Vortrag: 13th International Workshop on Direct and Inverse Problems in Piezoelectricity,
Kassel;
04.10.2017
- 06.10.2017.
-
F. Toth, C. Kirchlechner, F.D. Fischer, G. Dehm, F. G. Rammerstorfer:
"Influence of imperfections and friction on the deformation shape of > compressed bi-crystal crystal micropillars";
Vortrag: 2016 EMI International Conference,
Metz;
25.10.2016
- 27.10.2016.
-
F. Toth, M. Krommer, M. Kaltenbacher:
"Large amplitude vibrations of pre-stressed piezo- actuated circular plates";
Vortrag: 1st International Conference on Mechanics of Advanced Materials and Structures (ICMAMS 2018),
Torino, Italy;
17.06.2018
- 20.06.2018.
-
F. Toth, K. Roppert, H. Lehmann, M. Kaltenbacher, M. Proschek:
"Simulation elektromagnetischer Felder in mechatronischen Systemen";
Vortrag: Mechatroniktag des Instituts für Mechanik und Mechatronik,
Wien;
24.11.2017.
-
F. Toth, S. Schoder, M. Kaltenbacher:
"An infinite mapping layer for deep water waves";
Vortrag: GAMM 2017 - 88th Annual Meeting of the International Association of Applied Mathematics and Mechanics,
Weimar/DE;
06.03.2017
- 10.03.2017.
-
F. Toth, A. Volk, M. Kaltenbacher:
"Finite Element Simulations of Step-Lap Joints Applying an Anisotropic Material Model";
Vortrag: The 17th International IGTE Symposium on Numerical Field Calculation in Electrical Engineering,
Graz;
18.09.2016
- 21.09.2016.
-
H. Troger:
"Invariant Manifolds in the Dimension Reduction for Dissipative and Conservative Systems";
Vortrag: Euromech Colloquium 457 on Nonlinear Modes of Vibrating Systems,
Frejus, France (eingeladen);
07.06.2004
- 09.06.2004.
-
H. Troger:
"On the stability of the sky-hook";
Vortrag: 21st International Congress of Theoretical and Applied Mechanics,
Warsaw;
15.08.2004
- 21.08.2004.
-
J. Unger, M. Kozek, S. Jakubek:
"Reduced Order Optimization For Model Predictive Control Using Principal Control Moves";
Poster: NRW Young Scientist Award 2012,
Düsseldorf (eingeladen);
19.11.2012.
Zusätzliche Informationen
-
Y. Vetyukov:
"Axially Moving Continua: Lagrangian Mechanics And Mathematical Modelling";
Hauptvortrag: 11th International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2017,
Vienna (eingeladen);
03.07.2017
- 06.07.2017.
-
Y. Vetyukov:
"Axially moving structures: Eulerian description in mechanics of thin deformable bodies";
Vortrag: Lecture at the Institute of Problems of Mechanical Engineering, Russian Academy of Sciences,
St Petersburg, Russia;
10/2015.
-
Y. Vetyukov:
"Dynamik und Stabilität axial bewegter Strukturen";
Vortrag: Mechatroniktag des Instituts für Mechanik und Mechatronik,
Wien (eingeladen);
24.11.2017.
-
Y. Vetyukov:
"Finite Element Modelling of Endless Steel Belts";
Vortrag: 3rd International Workshop on Advanced Dynamics and Model Based Control of Structures and Machines,
Perm (eingeladen);
18.09.2017
- 22.09.2017.
-
Y. Vetyukov:
"Finite vibrations of axially moving beams and strings: non-material finite element analysis";
Vortrag: GAMM 2016,
Braunschweig/DE;
07.03.2016
- 11.03.2016.
-
Y. Vetyukov:
"Mechanics of axially moving structures and industrial applications";
Hauptvortrag: XLVIII International Summer School-Conference "Advanced Problems in Mechanics",
St. Petersburg (eingeladen);
26.06.2020.
Zusätzliche Informationen
-
Y. Vetyukov:
"Modeling nonlinear dynamics of axially moving strings in Eulerian and Lagrangian descriptions";
Vortrag: Advanced Problems in Mechanics 2016,
St. Petersburg, Russia;
29.06.2016.
-
Y. Vetyukov:
"On the stability and supercritical deformation of a circular ring with temperature-induced intrinsic curvature";
Vortrag: 2nd International Workshop on Advanced Dynamics and Model Based Control of Structures and Machines,
Wien;
21.09.2015
- 23.09.2015.
-
Y. Vetyukov:
"Steady motion of slender structures with friction";
Vortrag: 4th International Workshop on Advanced Dynamics and Model Based Control of Structures and Machines,
JKU Linz (eingeladen);
22.09.2019
- 25.09.2019.
Zusätzliche Informationen
-
Y. Vetyukov, V. Eliseev, M. Krommer:
"Modeling the Dynamics of a Flexible Belt Drive Using the Equations of a Deformable String with Discontinuities";
Vortrag: MATHMOD 2015 - 8th Vienna International Conference on Mathematical Modelling,
Wien;
18.02.2015
- 20.02.2015.
-
Y. Vetyukov, M. Krommer:
"Dynamic Stability of Axially Moving Strings and Rods at Eulerian Description: Finite Element Analysis";
Vortrag: WCCM 2016,
Seoul, Korea;
25.07.2016.
-
Y. Vetyukov, M. Krommer:
"Mixed Eulerian-Lagrangian Description in the Finite Element Modelling of an Endless Metal Belt System";
Vortrag: 8th Int. Conference on Design, Modelling and Experiments of Advanced Structures and Systems - DeMEASS VIII,
Moscow;
21.05.2017
- 24.05.2017.
-
Y. Vetyukov, M. Krommer:
"Multiplicative decomposition and incompatible undeformed state in the problem of buckling of axially moving plates";
Vortrag: 7th International Symposium on Design, Modelling and Experiments of Advanced Structures and Smart Systems,
Radebeul, Germany;
10/2015.
-
Y. Vetyukov, J. Scheidl, C. Schmidrathner:
"Motion of a friction belt drive with transverse deflections and evolution of contact zones at mixed Eulerian-Lagrangian kinematic description";
Vortrag: ECCM 2018,
Glasgow;
14.06.2018.
-
Y. Vetyukov, J. Scheidl, C. Schmidrathner, M. Krommer:
"Steel belt with imperfect geometry hanging on two drums: three-dimensional contact problem at mixed Eulerian-Lagrangian description";
Vortrag: 9th Int. Conf. on Design, Modelling and Experiments of Advanced Structures and Machines - DeMEASS IX,
Sesimbra (eingeladen);
03.10.2018.
-
J. Vilsecker, W. Mack, A. Falkner:
"Drift effects in vehicle simulation excited by wheel forces";
Vortrag: GAMM 2010 - 81st Annual Meeting of the International Association of Applied Mathematics and Mechanics,
Karlsruhe;
22.03.2010
- 26.03.2010.
-
J. Vilsecker, W. Mack, A. Falkner, R. Hanfstingl:
"On the complexity of hydromount-models in full vehicle simulation";
Vortrag: GAMM 2011,
Graz;
18.04.2011
- 21.04.2011.
-
A. Volk, M. Kaltenbacher, A. Sutor, M. Ertl, R. Lerch:
"3D Anisotropic Model for the Numerical Computation of Nonlinear Magnetostriction";
Vortrag: 19th International Conference on the Computation of Electromagnetic Fields,
Budapest (eingeladen);
30.06.2013.
-
J. Wassermann:
"Mechatronik - Innovative Systeme mit interdisziplinären Lösungen";
Vortrag: Habilitationskolloquium,
Wien;
02.03.2004.
-
J. Weber, S. Becker, J. Grabinger, M. Kaltenbacher:
"Hybrid Methods for Noise Prediction in Aeroacoustic Simulations of a Small Straight-Bladed Darrieus Turbine";
Vortrag: DAGA 2014, 40. Jahrestagung für Akustik,
Oldenburg (eingeladen);
10.03.2014
- 13.03.2014.
-
F. Wein, P. Seebacher, K. Angermeier, A. Rosskopf, M. Kaltenbacher:
"Topology optimization of electromagnetic devices";
Vortrag: WCSMO13,
Beijing, China;
20.05.2019
- 24.05.2019.
-
E. Weinmüller, I. Reichl, W. Auzinger, H. Schmiedmayer:
"Constraints for the Optimization of the Human Knee Joint";
Vortrag: 36me Congres de la Societé de Biomechanique,
Besancon (eingeladen);
09/2011.
-
M. Weitz, S. Schoder, M. Kaltenbacher:
"Numerical investigation of the resonance behavior of flow-excited Helmholtz resonators";
Vortrag: 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019),
Vienna;
18.02.2019
- 22.02.2019.
-
S. Zörner, M. Kaltenbacher, M. Döllinger:
"Multifield Phenomena Human Phonation: Fully Coupled Fluid-Structure Simulation Compared to Prescribed Movement";
Vortrag: International Summer School on Voice Assessment,
Erlangen;
03.07.2012
- 04.07.2012.
Zusätzliche Informationen
-
S. Zörner, P. Sidlof, A. Hüppe, M. Kaltenbacher:
"Acoustic perturbation equations and Lighthill´s acosutic analogy for the human phonation";
Vortrag: 21st International Congress on Acoustics,
Montreal, Kanada;
02.07.2013
- 07.07.2013.
Zusätzliche Informationen
Patente
-
M. Batliner, O. König, S. Jakubek, G. Prochart:
"Verfahren und Regler zur modellprädiktiven Regelung eines mehrphasigen DC/DC-Wandlers";
Patent: Österreich,
Nr. 513776;
eingereicht: 08.04.2014,
erteilt: 15.09.2015.
-
A. Dehe, Y. Belahurau, M. Dorfmeister, C. Glacer, M. Kaltenbacher, U. Schmid, M. Schneider, D. Tumpold:
"Microelectromechanical Loudspeaker";
Patent: USA,
Nr. Us 10,462,580 B2;
eingereicht: 22.03.2018,
erteilt: 29.10.2019.
Zusätzliche Informationen
-
N. Didcock, H. Altenstrasser, N. Keuth, A. Dragoti, S. Jakubek:
"Verfahren zur Erstellung von Kennfeldern";
Patent: Österreich,
Nr. A50472/2015;
eingereicht: 10.06.2015.
Zusätzliche Informationen
-
N. Didcock, C. Hametner, S. Jakubek:
"Verfahren zur Kalibrierung eines technischen Systems";
Patent: Österreich,
Nr. 518676;
eingereicht: 17.05.2016,
erteilt: 15.02.2018.
-
N. Didcock, S. Jakubek, H. Koegeler:
"Datenbasiertes Verfahren zum Erstellen eines Modell-Ensembles";
Patent: AT,
Nr. Av-3709 At;
eingereicht: 03/2015,
erteilt: 04/2015.
Zusätzliche Informationen
-
N. Didcock, A. Wasserburger, C. Hametner:
"Verfahren zur Kalibirierung eines technischen Systems";
Patent: Österreich,
Nr. 521927;
eingereicht: 10.12.2018,
erteilt: 15.10.2020.
Zusätzliche Informationen
-
M. Dorfmeister, M. Schneider, Th. Grille, U. Hedenig, A. Dehe, M. Kaltenbacher, U. Schmid:
"A Micromechanical Device, an Array of Micromechanical Devices, a Method of Manufacturing a Micromechanical Device and a Method of Controlling a Micromechanical Device";
Patent: USA,
Nr. Us 10516943b2;
eingereicht: 04.05.2016,
erteilt: 24.12.2019.
Zusätzliche Informationen
-
M. Dorfmeister, M. Schneider, Th. Grille, U. Hedenig, A. Dehe, M. Kaltenbacher, U. Schmid:
"Eine Mikroelektromechanische Vorrichtung, Eine Anordnung Mikroelektromechanischer Vorrichtungen, Ein Verfahren Zur Herstellung Einer Mikroelektromechanischen Vorrichtung Und Ein Verfahren Zum Betrieb Einer Mikroelektromechanischen Vorrichtung";
Patent: Deutschland,
Nr. De 10 2017 109 575 B4;
eingereicht: 04.05.2017,
erteilt: 01.10.2020.
-
S. Engleder:
"Einrichtung zum Regeln einer Spritzgiessmaschine";
Patent: Österreich,
Nr. AT 008 679 U1;
eingereicht: 20.09.2005,
erteilt: 15.11.2006.
-
S. Engleder:
"Verfahren zum Steuern und/oder Regeln einer Spritzgießmaschine";
Patent: Österreich,
Nr. AT 502 382 B1;
eingereicht: 22.09.2005,
erteilt: 15.03.2007.
-
N. Euler-Rolle, C. Hametner, S. Jakubek, F. Krainer, M. Forster, M. Seljak:
"Verfahren und Regelungseinheit zur Regelung eines nichtlinearen technischen Prozesses";
Patent: Österreich,
Nr. 522290;
eingereicht: 25.03.2019,
erteilt: 15.01.2021.
Zusätzliche Informationen
-
C. Hametner, S. Jakubek, M. Dohr:
"Verfahren und Batteriemanagementsystem zum Ermitteln eines Gesundheitszustandes einer Sekundärbatterie";
Patent: Österreich,
eingereicht: 31.08.2018.
-
C. Hametner, S. Jakubek, A. Suljanovic:
"Method for determining a control observer for the SoC";
Patent: Österreich,
Nr. 513189;
eingereicht: 06.11.2013,
erteilt: 15.11.2014.
-
J. Kancsár, C. Kügele, S. Jakubek:
"PEM-Brennstoffzelle";
Patent: Österreich,
Nr. 519349;
eingereicht: 30.12.2016,
erteilt: 15.06.2018.
-
J. Kancsár, C. Kügele, S. Jakubek, C. Hametner:
"Verfahren und Prüfstand zur Durchführung eines Prüflaufs für eine Brennstoffzelle";
Patent: Österreich,
Nr. 519171;
eingereicht: 18.12.2017,
erteilt: 15.08.2019.
-
O. König, W. Falmbigl, S. Jakubek, A. Eder, G. Prochart:
"Energiespeicheremulator und Verfahren zur Emulation eines Energiespeichers";
Patent: Österreich,
Nr. A50742/2017;
eingereicht: 04.09.2017.
-
O. König, S. Jakubek, G. Prochart, K. Gschweitl:
"Verfahren und eine Vorrichtung zur Prüfung des Antriebsstranges von zumindest teilweise elektrisch betriebenen Fahrzeugen";
Patent: Österreich,
Nr. A0610/2012;
eingereicht: 24.05.2012.
Zusätzliche Informationen
-
O. König, S. Jakubek, G. Prochart, K. Gschweitl:
"Verfahren und eine Vorrichtung zur Prüfung von elektrischen Energiespeichersystemen für den Antrieb von Fahrzeugen";
Patent: Österreich,
Nr. A50201/2012;
eingereicht: 24.05.2012.
Zusätzliche Informationen
-
M. Kozek, M. Brandstetter, M. Miletic, A. Schirrer:
"Method and controler for a power grid";
Patent: Europa,
Nr. 15155604.0 - 1807;
eingereicht: 18.02.2015.
Zusätzliche Informationen
-
M. Kozek, K Schulmeister:
"Verfahren und Vorrichtung zur seitlichen Lageregelung eines Metall-Prozessbandes";
Patent: Österreich,
Nr. 510198;
eingereicht: 01.04.2010,
erteilt: 15.05.2012.
Zusätzliche Informationen
-
C. Kügele, S. Jakubek, J. Kancsár:
"Geregelte Gaskonditionierung für ein Reaktionsgas einer Brennstoffzelle";
Patent: Österreich,
Nr. 518518;
eingereicht: 20.07.2016,
erteilt: 15.11.2017.
-
E. Luchini, M. Kozek:
"Cooling System With Model Predictive Control";
Patent: Deutschland,
Nr. De102017115497 (a1);
eingereicht: 11.07.2017.
Zusätzliche Informationen
-
E. Luchini, M. Kozek, F. Kitanoski, F. Schilling:
"Verfahren zur Regelung eines Kühlaggregats mit mehreren Kompressoren und Kühlaggregat";
Patent: Deutschland,
Nr. De102015016852 (a1);
eingereicht: 23.12.2015.
Zusätzliche Informationen
-
C. Mayr, S. Jakubek, C. Hametner, N. Keuth:
"Verfahren zum Entwerfen eines nichtlinearen Reglers für nichtlineare Prozesse";
Patent: Österreich,
Nr. 512251;
eingereicht: 28.02.2013,
erteilt: 15.08.2014.
Zusätzliche Informationen
-
D. Pernsteiner, A. Schirrer, R. Hofmann, S. Jakubek:
"Verfahren zur Ermittlung des Ladezustandes eines Phasenwechselspeichers";
Patent: Österreich,
Nr. 524238;
eingereicht: 17.02.2021,
erteilt: 15.04.2022.
-
F. Pfister, S. Geneder, S. Jakubek:
"Verfahren und Prüfstand zur Durchführung eines Prüflaufs mit einem Prüfling";
Patent: Österreich,
Nr. 518196;
eingereicht: 28.01.2016,
erteilt: 15.11.2017.
-
F. Pfister, S. Jakubek, A Fleck:
"Verfahren zur Reduzierung von Schwingungen in einem Prüfstand";
Patent: Österreich,
Nr. 512483;
eingereicht: 03.06.2013,
erteilt: 15.02.2015.
-
S. Pofahl, D. Ritzberger, S. Jakubek:
"Verfahren zur Ermittlung von Parametern einer Ersatzschaltung";
Patent: Österreich,
Nr. 521175;
eingereicht: 14.05.2018,
erteilt: 15.11.2019.
-
D. Radler, F. Kitanoski, F. Schilling, F. Nittaus, A. Tonchev, M. Kozek, E. Luchini:
"Verfahren zum Regeln eines Kühlsystems";
Patent: Deutschland,
Nr. Ep 3 269 573 A1;
eingereicht: 13.05.2016.
Zusätzliche Informationen
-
D. Ritzberger, S. Jakubek:
"Verfahren zur Diagnose eines technischen Systems";
Patent: Österreich,
eingereicht: 04.11.2016.
-
A. Schulz, T. Hinterdorfer, H. Sima, J. Wassermann, M. Neumann:
"Flywheel Design";
Patent: Österreich,
eingereicht: 15.05.2012.
Zusätzliche Informationen
-
A. Schulz, H. Sima, T. Hinterdorfer, J. Wassermann, M. Neumann:
"Optimale Betriebsführung";
Patent: Österreich,
eingereicht: 04.12.2012.
Zusätzliche Informationen
-
A. Schulz, M. Wehse, J. Wassermann, M. Neumann:
"Energy-Efficient Actuator System";
Patent: China,
Nr. CN102460318;
eingereicht: 23.04.2010,
erteilt: 15.05.2012.
-
A. Schulz, M. Wehse, J. Wassermann, M. Neumann:
"Energy-Efficient Actuator System";
Patent: Europa,
Nr. EP2422245;
eingereicht: 23.04.2010,
erteilt: 29.02.2012.
-
A. Schulz, M. Wehse, J. Wassermann, M. Neumann:
"Energy-Efficient Actuator System";
Patent: USA,
Nr. US2012038294;
eingereicht: 23.04.2010,
erteilt: 16.02.2012.
-
A. Schulz, M. Wehse, J. Wassermann, M. Neumann:
"Energy-Efficient Actuator System";
Patent: Österreich,
Nr. AT508109B;
eingereicht: 24.04.2009,
erteilt: 15.04.2012.
-
M. Stadlbauer, C. Hametner, S. Jakubek, T. Winsel, N. Keuth:
"Machine-implemented method for obtaining data from a nonlinear dynamic real system during a test run";
Patent: Österreich,
Nr. 511577;
eingereicht: 31.05.2011,
erteilt: 15.05.2015.
-
M. Stadlbauer, S. Jakubek, Maxime Deregnaucourt, A. Rainer, H. Lanschützer, K. Zettel, N. Didcock, C. Hametner:
"Methode zur Ermittlung eines Modells einer Ausgangsgröße eines technischen Systems";
Patent: Österreich,
Nr. 512977;
eingereicht: 22.05.2013,
erteilt: 15.12.2014.
-
A. Stribersky, M. Kollmann, G. Schandl, M. Kozek:
"Aktive Schwingungsreduktion an Schienenfahrzeugen";
Patent: Österreich,
Nr. At502141 (a1);
eingereicht: 21.10.2004,
erteilt: 15.01.2007.
-
A. Voigt, M. Kozek:
"Verfahren zur Regelung eines Prozesses";
Patent: Österreich,
Nr. AT 503.169 A1;
eingereicht: 06.02.2006,
erteilt: 15.10.2007.
-
A. Voigt, F. Winter, M. Kozek:
"Oxichlorierung von Olefinen und Aromaten unter Verwendung eines neuartigen Wirbelschicht-Reaktorkonzeptes";
Patent: Deutschland,
Nr. DP 102 38 811.3;
eingereicht: 2003,
erteilt: 2006.
-
A. Wasserburger, C. Hametner, N. Didcock, C. Mayr:
"Computergestütztes Verfahren und Vorrichtung zur wahrscheinlichkeitsbasierten Geschwindigkeitsprognose für Fahrzeuge";
Patent: Österreich,
Nr. 523850;
eingereicht: 02.10.2020,
erteilt: 15.12.2021.
-
A. Wasserburger, S. Jakubek, O. König, G. Prochart, A. Eder:
"Verfahren und Vorrichtung zur Kompensation von Störgrößen";
Patent: Österreich,
Nr. 521666;
eingereicht: 09.07.2018,
erteilt: 15.02.2022.
Zusätzliche Informationen
-
J. Wassermann:
"Vibrationseinrichtung für eine Streumittelausbringanlage für ein Schienenfahrzeug";
Patent: Deutschland,
Nr. DE102011115380A1;
eingereicht: 04.10.2012,
erteilt: 11.04.2013.
-
J. Wassermann, A. Schulz, M. Neumann:
"Actuator System";
Patent: Europa,
Nr. EP2304256;
eingereicht: 06.04.2011,
erteilt: 15.05.2012.
-
J. Wassermann, A. Schulz, M. Neumann:
"Actuator System";
Patent: Österreich,
Nr. AT509298B;
eingereicht: 19.06.2008,
erteilt: 15.01.2012.
Habilitationsschriften
-
H. Ecker:
"Suppression of Self-Excited Vibrations in Mechanical Systems by Parametric Stiffness Excitation";
Technische Universität Wien/Fakultät Maschinenbau,
2003.
-
J. Edelmann:
"Konsistente Modellbildung in der Fahrzeugdynamik";
Technische Universität Wien/Fakultät für Maschinenwesen und Betriebswissenschaften,
2012.
-
C. Hametner:
"Data Driven Methodologies for Calibration of Automotive Systems";
Fakultät für Maschinenwesen und Betriebswissenschaften,
2014.
-
S. Jakubek:
"Einige Beiträge zur Fehlerdiagnose und experimenteller Modellbildung statischer und dynamischer Prozesse";
Technische Universität Wien, Fakultät für Maschinenwesen und Betriebswissenschaften,
2007.
-
A. Schirrer:
"Predictive Control for Complex Distributed Systems and Hardware-in-the-Loop-Applications";
Technische Universität Wien,
2018.
Zusätzliche Informationen
-
T. Strasser:
"Distributed and Reconfigurable Automation Approaches Applied to Industrial Systems";
Technische Universität Wien, Fakultät für Maschinenwesen und Betriebswissenschaften,
2017.
Zusätzliche Informationen
-
Y. Vetyukov:
"Deformable Rods, Plates and Shells: from Basic Theory to Applications";
TU Wien / Mechanical and Industrial Engineering,
2016.
-
J. Wassermann:
"Mechatronische Systeme";
Technische Universität Wien / Fakultät Maschinenbau,
2003.
Dissertationen (eigene und begutachtete)
-
H. Abersfelder:
"Bemessung von geschlossenen, prismatischen Behältern unter Innendruck";
Betreuer/in(nen), Begutachter/in(nen): J. Zeman, P. Lugner;
Institut für Apparate- und Anlagenbau,
2001.
Zusätzliche Informationen
-
G. Adamcik:
"Weiterentwicklung und Analyse eines multifunktionellen Dynamometers mit isokinetischer Diagnostik für die Anwendung in der Schwerelosigkeit";
Betreuer/in(nen), Begutachter/in(nen): T. Angeli, H. Schmiedmayer;
E307-3,
2010;
Rigorosum: 01.10.2010.
-
J. Adlmanniner:
"Eine Anwendung von fehlertoleranten vernetzten Rechnersystemen";
Betreuer/in(nen), Begutachter/in(nen): P. Kopacek, P.H. Osanna;
Institut für Mechanik und Mechatronik / Abt.6 Intelligente Handhabungs- und Robotertechnik,
2005.
-
A. Albinsson:
"Online and Offline Identification of Tyre Model Parameters";
Betreuer/in(nen), Begutachter/in(nen): F. Bruzelius, M. Plöchl;
Institut für Mechanik und Mechatronik E325/A1,
2018;
Rigorosum: 08.05.2018.
-
Z. Ali:
"Transitional controller design for adaptive cruise control systems";
Betreuer/in(nen), Begutachter/in(nen): A. Popov, M. Plöchl, S. McWilliam;
Mechanical, Materials, Manufacturing Engineering & Management, University of Nottingham,
2011.
-
W. Alince:
"Ein Beitrag zur Auslegung von Pufferspeichern";
Betreuer/in(nen), Begutachter/in(nen): W. Linzer, H. Jörgl;
Institut für Technische Wärmelehre,
1988.
-
H. Amri:
"Variable Rotor Speed Drivetrain Investigation";
Betreuer/in(nen), Begutachter/in(nen): M. Weigand, V. Zhuravlev, F. Heitmeir;
Institut für Konstruktionswissenschaften,
2018;
Rigorosum: 16.11.2018.
Zusätzliche Informationen
-
T. Angeli:
"Leistungssteigerung bei Fahrradantrieben";
Betreuer/in(nen), Begutachter/in(nen): L. Rinder, P. Lugner;
E 307-3 Institut für Konstruktionswissenschaften und Technische Logistik,
1996;
Rigorosum: 1996.
-
S. Ates:
"Empirical analysis of corporate energy management practices in energy intensive industries in Turkey and modeling energy efficiency and CO2 mitigation potential using the LEAP energy planning system";
Betreuer/in(nen), Begutachter/in(nen): M.N. Durakbasa, P. Kopacek, K. Matyas;
Fertigungstechnik und Hachleistungslasertechnik,
2011;
Rigorosum: 19.12.2011.
-
W. Auli:
"Statische und dynamische Stabilität von Leichtbaukonstruktionen unter konservativer und nichtkonservativer Belastung";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, H. Troger;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1986.
Zusätzliche Informationen
-
W. Bacher:
"Camber-Control / Bandlagenregelung an einem Warmwalzreversiergerüst";
Betreuer/in(nen), Begutachter/in(nen): H. Jörgl;
Inst. f. Maschinen- und Prozess-Automatisierung,
2003.
-
S. Badshah:
"Identification of vibration and elastic properties of aluminium foam using modal testing and analysis";
Betreuer/in(nen), Begutachter/in(nen): J. Wassermann, H. E. Pettermann;
Mechanik und Mechatronik,
2011;
Rigorosum: 29.11.2011.
-
N. Barta:
"Detailkonstruktion, Steuerungskonzept und Trainingsvorteile des Kraftdynamometers MDS";
Betreuer/in(nen), Begutachter/in(nen): T. Angeli, H. Jörgl;
E 307,
2011;
Rigorosum: 20.06.2011.
Zusätzliche Informationen
-
A. Barth:
"Ein Beitrag zur zustandsorientierten Instandhaltung von Hydrogeräten für moderne Schienenfahrzeuge";
Betreuer/in(nen), Begutachter/in(nen): P. Kopacek, P.H. Osanna;
Institut für Mechanik und Mechatronik - Abteilung 6 Intelligente Handhabungs und Robotertechnik,
2007;
Rigorosum: 2007.
-
G. Bas:
"Energy management based model in advanced manufacturing industry enabled by nanotechnology";
Betreuer/in(nen), Begutachter/in(nen): M.N. Durakbasa, P. Kopacek, K. Matyas;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2013;
Rigorosum: 05/2013.
-
A. Bauer:
"Sicherheit u. Gefahr aus techn. Sicht, ausgehend vom akad. u. medialen Blickpunkt werden singuläre Ordnungsschemata erarbeitet u. Sicherheits-Strategien u. -Methoden beleuchtet u. optimal generiert";
Betreuer/in(nen), Begutachter/in(nen): P.H. Osanna, P. Kopacek;
Institut für Fertigungstechnik - Abteilung für Austauschbau und Messtechnik,
2007;
Rigorosum: 2007.
-
J.M. Bauer:
"Qualitätssicherung und die Erstellung von Qualitätssicherungssystemen an Organisationen für die universitäre Ausbildung von Ingenieurinnen";
Betreuer/in(nen), Begutachter/in(nen): P.H. Osanna, P. Kopacek;
311-3,
2003.
-
M Bayray:
"Crack Growth Investigations in Pressure Vessels using Acoustic Emission Technique";
Betreuer/in(nen), Begutachter/in(nen): J. Zeman, H. Jörgl;
Institut für Apparate- und Anlagenbau,
2002.
Zusätzliche Informationen
-
A.E. Beken:
"Die Umsetzung eines nachhaltigkeitsorientierten Total-Quality-Managements als vorbereitende Maßnahme zur Einführung eines Integrierten Managementsystems bestehend aus den Normen ISO 9001, ISO 14001 und ISO 50001";
Betreuer/in(nen), Begutachter/in(nen): M.N. Durakbasa, P. Kopacek, K. Matyas;
311-3,
2014;
Rigorosum: 11.12.2014.
Zusätzliche Informationen
-
C. Benatzky:
"Theoretical and experimental investigation of an active vibration damping concept for metro vehicles";
Betreuer/in(nen), Begutachter/in(nen): H. Jörgl, H. Springer;
Inst. für Mechanik und Mechatronik (E325),
2006;
Rigorosum: 25.10.2006.
-
T. Biermeier:
"Entwicklung einer Methodik zur akustischen Auslegung von Fahrzeugklimatisierungssystemen unter Berücksichtigung psychoakustischer Parameter";
Betreuer/in(nen), Begutachter/in(nen): S. Becker, M. Kaltenbacher;
Lehrstuhl für Prozessmaschinen und Anlagentechnik - Friedrich-Alexander Universität Erlangen-Nürnberg,,
2014;
Rigorosum: 03.06.2014.
-
L. Bitschnau:
"Constrained Model Predictive Control of a Continuous Annealing Furnace";
Betreuer/in(nen), Begutachter/in(nen): M. Kozek, A. Werner;
Mechanik und Mechatronik 325,
2011;
Rigorosum: 04.05.2011.
Zusätzliche Informationen
-
E. Boyraz:
"Ein Beitrag zur Bewertung der dynamischen Eigenschaften von Luftfedern";
Betreuer/in(nen), Begutachter/in(nen): D. Schramm, M. Plöchl;
Lehrstuhl für Mechatronik, Universität Duisburg-Essen,
2019.
-
F. Bruck:
"Dynamische Interaktion von Schi und Schnee - Modellbildung und Simulation";
Betreuer/in(nen), Begutachter/in(nen): P. Lugner, T. Angeli;
E 325-1 Institut für Mechanik und Mechatronik,
2003;
Rigorosum: 2003.
-
P. Brugger:
"Modellbildung und Simulation zur Verbesserung des Prothetischen Ganges von Oberschenkelamputierten";
Betreuer/in(nen), Begutachter/in(nen): H. Schmiedmayer;
E 325-1 Institut für Mechanik und Mechatronik,
2004.
-
A. Byagowi:
"Control System for a Humanoid Robot";
Betreuer/in(nen), Begutachter/in(nen): P. Kopacek, M. Vincze;
E376,
2010;
Rigorosum: 25.03.2010.
-
F. Cigarini:
"Model-based Analysis and Multiphysics Finite Element Simulation for Shaping the Dynamics of HighPrecision Scanning Systems";
Betreuer/in(nen), Begutachter/in(nen): G. Schitter, M. Kaltenbacher, Y. Yong;
E376,
2021;
Rigorosum: 09.07.2021.
-
F. Comolli:
"Force sensors as smart vehicle subsystems to improve safety in intelligent transport systems (ITS)";
Betreuer/in(nen), Begutachter/in(nen): G. Mastinu, M. Gobbi, M. Plöchl;
Politecnico di Milano, Department of Mechanical Engineering,
2019.
-
P. Croaker:
"A Particle Accelerated Hybrid CFD_BEM Method For Low Mach Number Flow Induced Noise";
Betreuer/in(nen), Begutachter/in(nen): N. Kessissoglou, M. Kaltenbacher;
School of Mechanical and Manufacturing Engineering, Faculty of Engineering, The University of New South'Wales, Sydney, Australia,
2014.
-
A Cvetanovic:
"A Contribution to Micro Manipulation (Handling and Assembly) in the Chamber of a Scanning Electron Microscope and under an Optical Microscope";
Betreuer/in(nen), Begutachter/in(nen): H. Detter, P. Kopacek;
Institut für Sensor- und Aktuatorsysteme,
2009;
Rigorosum: 01.07.2009.
-
K. Daichendt:
"Ein modulares Softwaresystem zur Steuerung und Regelung von Demontage-(Montage-)Zellen";
Betreuer/in(nen), Begutachter/in(nen): P. Kopacek, P.H. Osanna;
Institut für Handhabungsgeräte und Robotertechnik,
2004.
-
A. Decker:
"Weiterentwicklung und Inbetriebnahme einer automatischen Infrarotentlötanlage für Leiterplatten";
Betreuer/in(nen), Begutachter/in(nen): P. Kopacek, P.H. Osanna;
Institut für Mechanik und Mechatronik / Abt.6 Intelligente Handhabungs- und Robotertechnik,
2005.
-
F. Degenhart:
"Einsatz eines Reifensensors zur Optimierung des Reifenentwicklungsprozesses";
Betreuer/in(nen), Begutachter/in(nen): M. Plöchl, J. Edelmann;
Institut für Mechanik und Mechatronik E325-01,
2020.
-
Maxime Deregnaucourt:
"Efficient Data-Driven Modelling of Constrained Nonlinear Processes";
Betreuer/in(nen), Begutachter/in(nen): S. Jakubek, J. Kunovsky;
Institut für Mechanik und Mechatronik,
2015;
Rigorosum: 22.01.2015.
Zusätzliche Informationen
-
N. Didcock:
"Data Based Calibration Methods for High Dimensional Automotive Systems";
Betreuer/in(nen), Begutachter/in(nen): S. Jakubek, C. Hametner, M. Deistler;
Institut für Mechanik und Mechatronik,
2018;
Rigorosum: 31.01.2018.
-
F. Dohnal:
"Damping of mechanical vibrations by parametric excitation";
Betreuer/in(nen), Begutachter/in(nen): H. Ecker, A. Steindl;
Inst. für Mechanik und Mechatronik,
2005.
Zusätzliche Informationen
-
P. Dolovai:
"Optimierung der Drehzahlregelung von Gasmotoren durch innovative Regelungskonzepte - Eine Machbarkeitsstudie";
Betreuer/in(nen), Begutachter/in(nen): H. Jörgl, B. Geringer;
E 325/5 Institut für Mechanik und Mechatronik, Abteilung für Regelungstechnik und Prozessautomatisierung,
2008;
Rigorosum: 18.12.2008.
-
K. Dorninger:
"Entwicklung von nichtlinearen FE-Algorithmen zur Berechnung von Schalenkonstruktionen aus Faserverbundstoffen";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, H. Troger;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1989.
Zusätzliche Informationen
-
M. Drinek:
"Entwicklung eines Bildverarbeitungssystems für die Charakterisierung von bestückten Leiterplatten";
Betreuer/in(nen), Begutachter/in(nen): P. Kopacek, H. Osanna;
Institut für Handhabungsgeräte und Robotertechnik,
2003.
-
M. Dugolli:
"Bioclimatic architecture and home automation";
Betreuer/in(nen), Begutachter/in(nen): P. Kopacek, M.N. Durakbasa, K. Matyas;
Institut für Mechanik und Mechatronik; Institut für Fertigungstechnik und Hochleistungslasertechnik; E330,
2012;
Rigorosum: 05.07.2012.
-
C. Dullinger:
"Holistic energy optimization of rail vehicles";
Betreuer/in(nen), Begutachter/in(nen): M. Kozek, S. Jakubek, R. Hofmann;
Institut für Mechanik und Mechatronik,
2018;
Rigorosum: 11.07.2018.
Zusätzliche Informationen
-
J. Edelmann:
"Fahrermodelle in der Fahrdynamiksimulation";
Betreuer/in(nen), Begutachter/in(nen): M. Plöchl, B. Geringer;
Mechanik und Mechatronik E325/A1,
2007;
Rigorosum: 19.12.2007.
-
M. Eichhorn:
"Fatigue Analysis of Prototype Francis Turbines Using Numerical Simulations and Site Measurements";
Betreuer/in(nen), Begutachter/in(nen): C. Bauer, M. Kaltenbacher, R. Willinger;
E302 - Institut für Energietechnik und Thermodynamik,
2017;
Rigorosum: 30.05.2017.
-
A. Eidmann:
"Fahrzeug zu Infrastruktur (V2I) Echtzeit-Kommunikation für mobile Messsysteme";
Betreuer/in(nen), Begutachter/in(nen): E. Pucher, M.N. Durakbasa, P. Kopacek;
Fahrzeugantriebe und Automobiltechnik, E315,
2018.
-
S. Einsle:
"Analyse und Modellierung des Reifenübertragungsverhaltens bei transienten und extremen Fahrmanövern";
Betreuer/in(nen), Begutachter/in(nen): M. Beitelschmidt, P. Lugner;
Fahrzeugmodellierung und -simulation, TU-Dresden,
2010.
-
C. Einspieler:
"Entwicklung Einer In-Prozess Werkzeugverschleissbestimmung Beim Tiefbohren In Austenitischen Stählen";
Betreuer/in(nen), Begutachter/in(nen): F. Bleicher, F.J. Maringer, J. Wassermann;
E311,
2017;
Rigorosum: 19.12.2017.
-
S. Eisner:
"An extension to Nitsche-type mortaring for non-conforming finite elements";
Betreuer/in(nen), Begutachter/in(nen): M. Kaltenbacher, H. E. Pettermann;
Mechanik und Mechatronik,
2016;
Rigorosum: 06.07.2016.
-
L. Engbroks:
"Analytische und optimierungsbasierte Untersuchungen zum Energie- und Thermomanagement paralleler PIug-In-Hybridfahrzeuge";
Betreuer/in(nen), Begutachter/in(nen): B. Geringer, P. Hofmann, S. Jakubek;
Institut für Fahrzeugantriebe und Automobiltechnik(IFA),
2020;
Rigorosum: 01.09.2020.
Zusätzliche Informationen
-
S. Engleder:
"Zur Dynamik von Kniehebelschließeinheiten schnelllaufender Spritzgießmaschinen";
Betreuer/in(nen), Begutachter/in(nen): H. Springer, R. Scheidl;
Institut für Mechanik und Mechatronik,
2005.
-
N. Euler-Rolle:
"Automated generation of feedforward control using feedback linearization of local model networks";
Betreuer/in(nen), Begutachter/in(nen): S. Jakubek, I. Skrjanc;
Institut für Mechanik und Mechatronik,
2016;
Rigorosum: 12.04.2016.
-
G. Feik:
"Messeinrichtung zur indirekten Bestimmung dreidimensionaler Belastungen an Fahradpedalen";
Betreuer/in(nen), Begutachter/in(nen): J. Wassermann, K. Hoffmann;
Inst. für Mechanik und Mechatronik,
2005;
Rigorosum: 10.11.2005.
Zusätzliche Informationen
-
P. Finsterwalder:
"Analyse und mechanisches Konzept therapeutisch wirksamer Massagebewegungen";
Betreuer/in(nen), Begutachter/in(nen): J. Wassermann, E. Kaniusas;
Mechanik und Mechatronik,
2015.
-
G. Fischer:
"Postgraduale Weiterbildung in Engineering Management";
Betreuer/in(nen), Begutachter/in(nen): P. Kopacek, P.H. Osanna;
Institut für Handhabungsgeräte und Robotertechnik,
2004.
-
M. Fischer:
"Validierungsstrategien von Laserstrahlschweißprozessen für mechanisch hochbeanspruchte Großbaugruppen in der Schienenfahrzeugindustrie";
Betreuer/in(nen), Begutachter/in(nen): G. Liedl, P. Kopacek;
Institut für Fertigungstechnik und Hochleistungslasertechnik,
2014;
Rigorosum: 04.09.2014.
-
E. Fischmeister:
"Strukturelles Sicherheits-Management für die Instandhaltung von urbanen Gleisen";
Betreuer/in(nen), Begutachter/in(nen): N. Ostermann, Hp Rossmanith;
Institut für Verkehrswissenschaften, E230-2, Forschungsbereich für Eisenbahnwesen, Verkehrswirtschaft und Seilbahnen,
2012;
Rigorosum: 30.05.2012.
-
M. Fritzsche:
"Ein Beitrag zur Objektivierung des Sicherheitsempfindens mit Fahrermodellen bei Lenkstörungen";
Betreuer/in(nen), Begutachter/in(nen): D. Schramm, M. Plöchl;
Lehrstuhl für Mechatronik, Universität Duisburg-Essen,
2016.
-
G. Galasso:
"Modelling the nanosecond laser ablation of a silicon target";
Betreuer/in(nen), Begutachter/in(nen): M. Kaltenbacher;
Mechanik und Mechatronik,
2017.
-
G. Gasteiger:
"Schwingungen an Wärmetauschern";
Betreuer/in(nen), Begutachter/in(nen): W. Linzer, H. Troger;
Institut für Technische Wärmelehre,
1983.
-
A. Gharaei:
"Ein Gesamtkonzept für ein modulares Krankenhausinformationssystem";
Betreuer/in(nen), Begutachter/in(nen): P. Kopacek;
Institut für Handhabungsgeräte und Robotertechnik,
2002.
-
J. Griffin:
"Influences of drive torque distribution on road vehicle handling and efficiency";
Betreuer/in(nen), Begutachter/in(nen): A. Popov, M. Plöchl, D. Branson;
University of Nottingham,
2014.
-
B. Gross:
"Betriebliche, messtechnische Online-Überwachung von Schienenfahrzeugen";
Betreuer/in(nen), Begutachter/in(nen): J. Wassermann, G. Magerl;
Mechanik und Mechatronik,
2015.
-
S. Grosswindhager:
"Modeling and Control of Biomass-Fired District Heating Networks";
Betreuer/in(nen), Begutachter/in(nen): M. Kozek, M. Deistler;
Institut für Mechanik und Mechatronik,
2013.
-
T. Grünberger:
"Optimierung neuronaler Regler mittels Genetischer Algorithmen";
Betreuer/in(nen), Begutachter/in(nen): A. Weinmann, H. Jörgl;
E375,
1997.
-
V. Halmschlager:
"Development of an Optimization Framework and Grey-Box Modeling Concepts for Industrial Applications";
Betreuer/in(nen), Begutachter/in(nen): R. Hofmann, M. Kozek, P. Stuart;
Faculty of Mechanical and Industrial Engineering,
2021;
Rigorosum: 19.07.2021.
-
C. Hametner:
"Dynamic System Identification using Local Model Architectures";
Betreuer/in(nen), Begutachter/in(nen): H. Jörgl, S. Jakubek, B. Geringer;
E 325/5 Institut für Mechanik und Mechatronik, Abteilung für Regelungstechnik und Prozessautomatisierung,
2007;
Rigorosum: 30.11.2007.
Zusätzliche Informationen
-
E. Hansy-Staudigl:
"Nonlinear modeling and analysis of thin dielectric elastomer structures as electro-elastic material bodies and surfaces";
Betreuer/in(nen), Begutachter/in(nen): M. Krommer, H Irschik, H. Altenbach;
Institut für Mechanik und Mechatronik,
2020;
Rigorosum: 06/2020.
Zusätzliche Informationen
-
S. Hartl:
"Analysis of fiber reinforced filament wound rotors";
Betreuer/in(nen), Begutachter/in(nen): M. Kaltenbacher, I.C. Skrna-Jakl;
Mechanik und Mechatronik,
2016;
Rigorosum: 09.06.2016.
-
A. Hauck:
"Higher order finite elements for coupled and anisotropic field problems";
Betreuer/in(nen), Begutachter/in(nen): M. Kaltenbacher, U. Rüde;
Sensorik,
2016;
Rigorosum: 02.05.2016.
-
M. Haudum:
"Kombinierte Fahrzustandsschätzung von Quer- und Längsdynamik";
Betreuer/in(nen), Begutachter/in(nen): M. Plöchl, J. Edelmann;
Institut für Mechanik und Mechatronik E325/A1,
2018.
-
F. Hausberg:
"Adaptive und kennfeldbasierte Steuerung aktiver Motorlager";
Betreuer/in(nen), Begutachter/in(nen): M. Plöchl, M. Rupp;
Institut für Mechanik und Mechatronik E325/A1,
2014.
-
S. Helm:
"Impedance Based Control for Engine-in-the-Loop Test-Beds";
Betreuer/in(nen), Begutachter/in(nen): M. Kozek, P. Hofmann;
E325A5,
2010;
Rigorosum: 10.05.2010.
-
P. Helnwein:
"Zur initialen Abschätzbarkeit von Stabilitätsgrenzen auf nicht linearen Last-Verschiebungspfaden elastischer Strukturen mittels der Methde der Finiten Elemente";
Betreuer/in(nen), Begutachter/in(nen): H.A. Mang, H. Troger;
Institute for Strength of Materials, Vienna University of Technology,
1996.
Zusätzliche Informationen
-
M. Hemedi:
"Optimal input - output selection for the control of flexible structures";
Betreuer/in(nen), Begutachter/in(nen): M. Kozek, M. Hromcik;
Institut für Mechanik und Mechatronik,
2015;
Rigorosum: 18.11.2015.
Zusätzliche Informationen
-
T. Henn:
"Modellbasierte Applikation von Fahrdynamiksystemen am Beispiel der adaptiven Dämpfung";
Betreuer/in(nen), Begutachter/in(nen): D. Schramm, M. Plöchl;
Lehrstuhl für Mechatronik, Universität Duisburg-Essen,
2018.
-
T. Hinterdorfer:
"Effizienter Energietransfer und Steigerung der Energiedichte bei magnetisch gelagerten Schwungradspeichern";
Betreuer/in(nen), Begutachter/in(nen): J. Wassermann, W. Amrhein;
Institut für Mechanik und Mechatronik, E325,
2014;
Rigorosum: 13.10.2014.
Zusätzliche Informationen
-
G. Hippmann:
"Modellierung von Kontakten komplex geformter Körper in der Mehrkörperdynamik";
Betreuer/in(nen), Begutachter/in(nen): P. Lugner;
E 325-1 Institut für Mechanik und Mechatronik,
2004.
-
M. Hirschmanner:
"Control of Unbalance and Self-Exciting Forces by Active Magnetic Brearings";
Betreuer/in(nen), Begutachter/in(nen): H. Springer, H. Jörgl;
Institut für Maschinendynamik und Messtechnik,
2003.
-
W. Hofbauer:
"Moderne Regelstrategien für Gasmotoren";
Betreuer/in(nen), Begutachter/in(nen): H. Jörgl;
325 - 5,
2005.
-
R. Hofstädter:
"Energy optimal control of thermal comfort in trams";
Betreuer/in(nen), Begutachter/in(nen): M. Kozek, S. Jakubek, J. Amaya;
Institut für Mechanik und Mechatronik,
2018;
Rigorosum: 12.11.2018.
Zusätzliche Informationen
-
K. Holzmann:
"Modellierung und Regelung von elektrorheologischen Dämpfern";
Betreuer/in(nen), Begutachter/in(nen): A. Kugi, A. Steindl;
E376,
2011;
Rigorosum: 06.09.2011.
-
T. Hrabal:
"Construction Project Management im Engineering Management Programm";
Betreuer/in(nen), Begutachter/in(nen): P. Kopacek, P.H. Osanna;
Institut für Mechanik und Mechatronik / Abt.6 Intelligente Handhabungs- und Robotertechnik,
2005.
-
A. Hüppe:
"Spectral Finite Elements for Acoustic Field Computation";
Betreuer/in(nen), Begutachter/in(nen): M. Kaltenbacher, S. Marburg;
Alps-Adriatic University Klagenfurt,
2013;
Rigorosum: 08.02.2013.
-
H. Husstedt:
"Measurement of Magnetic Fields for the Testing of Automotive Sensors";
Betreuer/in(nen), Begutachter/in(nen): M. Kaltenbacher, B. Zagar;
Alps-Adriatic University Klagenfurt,
2012;
Rigorosum: 27.04.2012.
-
M. Jirout:
"Mechanische Auslegung von Magnetschienenbremsen";
Betreuer/in(nen), Begutachter/in(nen): P. Lugner;
Institut für Mechanik und Mechatronik E325/A1,
2006.
-
C. Junger:
"Computational aeroacoustics for the characterization of noise sources in rotating systems";
Betreuer/in(nen), Begutachter/in(nen): M. Kaltenbacher, S. Becker;
Mechanik und Menchatronik,
2019;
Rigorosum: 17.10.2019.
Zusätzliche Informationen
-
G. Jungmayr:
"Der magnetisch gelagerte Lüfter";
Betreuer/in(nen), Begutachter/in(nen): W. Amrhein, J. Wassermann;
Elektrische Antriebe und Leistungselektronik,
2008.
-
J. Kager:
"The Deployment of Mechanistic Models for Advanced Bioprocess Monitoring and Control";
Betreuer/in(nen), Begutachter/in(nen): C. Herwig, F. van der Berg, S. Jakubek;
Institut für Verfahrenstechnik, Umwelttechnik und Technische Biowissenschaften,
2019;
Rigorosum: 07.06.2019.
-
J. Karner:
"Ein Beitrag zur Entwicklung von Sicherheitsbauteilen für Seilaufzüge";
Betreuer/in(nen), Begutachter/in(nen): K. Hoffmann, P. Kopacek;
Institut für Konstruktionswissenschaften und Technische Logistik E 307,
2006;
Rigorosum: 05.12.2006.
-
J. Kemna:
"Analyseverfahren auf Bauteil- und Systemebene zur Bewertung von Gummi-Metall-Lagern in Bezug auf Fahrkomfort und Fahrdynamik";
Betreuer/in(nen), Begutachter/in(nen): M. Plöchl, J. Edelmann;
Institut für Mechanik und Mechatronik E325/A1,
2018.
-
N. Keuth:
"An Improved Neuro-Fuzzy Training Algorithm for Automotive Applications";
Betreuer/in(nen), Begutachter/in(nen): H. Jörgl, B. Geringer;
E 325Institut für Mechanik und Mechatronik, Abteilung für Regelungstechnik und Prozessautomatiserung,
2004.
Zusätzliche Informationen
-
T. Kiefer:
"Modeling and control of the hot rolling process of heavy plates in view of the elimination of ski-ends";
Betreuer/in(nen), Begutachter/in(nen): A. Kugi, H. Troger;
Institut für Automatisierungs- und Regelungstechnik,
2007;
Rigorosum: 18.12.2007.
-
M. Killian:
"Cooperative fuzzy model predictive control of a multi-zone office building";
Betreuer/in(nen), Begutachter/in(nen): M. Kozek, V.M. Veliov;
Institut für Mechanik und Mechatronik,
2016;
Rigorosum: 22.02.2016.
Zusätzliche Informationen
-
F. Klinger:
"Kombinierte Betrachtung passiver und (semi-)aktiver Radaufhängungen mittels äquivalenter Fahrwerksparameter";
Betreuer/in(nen), Begutachter/in(nen): J. Edelmann, M. Plöchl;
Institut für Mechanik und Mechatronik E325/A1,
2018.
-
R. Knasmillner:
"Dynamische Materialzerstörung in der Kontaktzone von Hartmetallstift und Gestein";
Betreuer/in(nen), Begutachter/in(nen): F. Ziegler, H. Rossmanith;
Institut für Mechanik,
2002.
Zusätzliche Informationen
-
T. Kniffka:
"Numerical,Semi-analytical and Analytical Approaches for Investigating Para,etrically Excited Non-linear Systems";
Betreuer/in(nen), Begutachter/in(nen): H. Ecker, B. Mace;
Mechanik und Mechatronik,
2016;
Rigorosum: 12.07.2016.
-
C. Kobetz:
"Modellbasierte Fahrdynamikanalyse durch ein an Fahrmanövern parameteridentifiziertes querdynamisches Simulationsmodell";
Betreuer/in(nen), Begutachter/in(nen): P. Lugner, B. Geringer;
E 325 Institut für Mechanik,
2003.
Zusätzliche Informationen
-
G. Kocmann:
"End of life management of flatscreens";
Betreuer/in(nen), Begutachter/in(nen): P. Kopacek, P.H. Osanna;
Institut für Mechanik und Mechatronik - Abteilung 6 Intelligente Handhabungs und Robotertechnik,
2007;
Rigorosum: 2007.
-
O. König:
"Battery Impedance Emulation for Power-Hardware-in-the-Loop UsingModel Predictive Control";
Betreuer/in(nen), Begutachter/in(nen): S. Jakubek, H. Michael;
Institut für Mechanik und Mechatronik,
2013;
Rigorosum: 25.07.2013.
Zusätzliche Informationen
-
S. Körber:
"Ein Beitrag zur Anwendung Neuronaler Netze";
Betreuer/in(nen), Begutachter/in(nen): P. Kopacek;
Institut für Handhabungsgeräte und Robotertechnik,
2002.
-
M. Koller:
"Method Development in the Field of the Mixed Integer Linear Programming Unit Commitment Problem";
Betreuer/in(nen), Begutachter/in(nen): R. Hofmann, M. Kozek, W. Gawlik;
E302 - Institut für Energietechnik und Thermodynamik,
2019;
Rigorosum: 19.06.2019.
-
D. Kollreider:
"Identifikation der Reifeneigenschaften als Grundlage zur Fahrdynamikbewertung";
Betreuer/in(nen), Begutachter/in(nen): W. Hirschberg, M. Plöchl;
Institut für Fahrzeugtechnik, TU-Graz,
2009.
-
T. Komenda:
"Modell zur Taktzeitermittlung von Prozessen in kollaborationsfähigen Mensch-Maschine-Arbeitssystemen";
Betreuer/in(nen), Begutachter/in(nen): S. Schlund, H. Ecker, B. Kuhlenkötter;
Institut für Managementwissenschaften; Inst. f. Mechanik und Mechatronik; Ruhr-Universität Bochum,
2022;
Rigorosum: 11.03.2022.
-
G. Korlath:
"Mobilitätsanalyse von Rad- und Kettenfahrzeugen auf unbefestigtem Untergrund mit Hilfe von längsdynamischen Simulationsmodellen";
Betreuer/in(nen), Begutachter/in(nen): P. Lugner, H.-P. Lenz;
E325 Institut für Mechanik,
2003.
Zusätzliche Informationen
-
M. Kozek:
"Track Quality Evaluation Using a Dynamic Black-Box Model of a Railway Vehicle: A Feasibility Study";
Betreuer/in(nen), Begutachter/in(nen): H. Jörgl, K. Rießberger;
Insitut für Maschinen- und Prozessautomatisierung,
1998;
Rigorosum: 1998.
Zusätzliche Informationen
-
W. Krach:
"Finite Element Based Investigation of Stress Fields and Bone Remodeling in and around Uncemented Tibial Prostheses";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, P. Lugner;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1997.
Zusätzliche Informationen
-
F. Kracht:
"Modellbildung und Simulation der Dynamik und Elastokinematik von Radaufhängungen für Echtzeitanwendungen";
Betreuer/in(nen), Begutachter/in(nen): D. Schramm, M. Plöchl;
Lehrstuhl für Mechatronik, Universität Duisburg-Essen,
2020.
-
L. Kräuter:
"Quality Assurance of Prototypes";
Betreuer/in(nen), Begutachter/in(nen): P.H. Osanna, P. Kopacek;
Institut für Handhabungsgeräte und Robotertechnik,
2004.
-
G. Kravchenko:
"Numerical Simulations of Fatigue Crack Problems in Semiconductor Devices Subjected to Thermomechanical Loading";
Betreuer/in(nen), Begutachter/in(nen): H. E. Pettermann, M. Kaltenbacher;
Institut für Leichtbau und Struktur-Biomechanik, TU Wien,
2014;
Rigorosum: 27.11.2014.
Zusätzliche Informationen
-
G. Kucera:
"Die wesentlichen Prozessparameter zur maschinellen Herstellung von Stampfkontakten für Kohlebürsten";
Betreuer/in(nen), Begutachter/in(nen): P. Kopacek, P.H. Osanna;
Institut für Handhabungsgeräte und Robotertechnik,
2004.
-
F. Lackner:
"Design and High Precision Monitoring of Detector Structures at CERN";
Betreuer/in(nen), Begutachter/in(nen): P.H. Osanna, P. Kopacek;
Institut für Fertigungstechnik - Abteilung für Austauschbau und Messtechnik,
2007;
Rigorosum: 2007.
-
T. Lässer:
"Das dynamische Verhalten von Seilbahnfahrzeugen in Wechselwirkung mit der Dynamik der Seile";
Betreuer/in(nen), Begutachter/in(nen): G. Kartnig, S. Jakubek;
E307, E325,
2016;
Rigorosum: 29.11.2016.
-
M. Lahti:
"Suspension-Tire-Bahavior Models";
Betreuer/in(nen), Begutachter/in(nen): P. Lugner, B. Geringer;
Institut für Mechanik und Mechatronik, E325/A1,
2012.
-
S. Lefèvre:
"Eine Methode zur Achsauslegung von Kraftfahrzeugen mit Fokus auf Fahrdynamik und Fahrkomfort";
Betreuer/in(nen), Begutachter/in(nen): D. Schramm, M. Plöchl;
Lehrstuhl für Mechatronik, Universität Duisburg-Essen,
2020.
-
M. Lenarcic:
"Untersuchung des S-Schlags in reversiblen Pumpturbinen und systematische Entwicklung von Gegenmaßnahmen";
Betreuer/in(nen), Begutachter/in(nen): C. Bauer, M. Kaltenbacher;
E302 - Institut für Energietechnik und Thermodynamik,
2016;
Rigorosum: 30.09.2016.
-
A. Lerch:
"Entwicklung dämpfender Sinterwerkstoffe und Untersuchung ihrer akustischen Eigenschaften";
Betreuer/in(nen), Begutachter/in(nen): H. Danninger, J. Wassermann;
Institut für Chemische Technologien und Analytik,
2006;
Rigorosum: 09.10.2006.
-
R. Lernbeiss:
"Simulation dynamischer Phänomene bei Fahrwerken von Verkehrsflugzeugen";
Betreuer/in(nen), Begutachter/in(nen): M. Plöchl, H. Ecker;
Institut für Mechanik und Mechatronik,
2009.
-
Y. Limani:
"A multi-criteria approach for sustainability concept of transport planning";
Betreuer/in(nen), Begutachter/in(nen): P. Kopacek, M.N. Durakbasa, K. Matyas;
Institut für Mechanik und Mechatronik; Institut für Fertigungstechnik und Hochleistungslasertechnik; E330,
2012;
Rigorosum: 05.07.2012.
-
J. Loof:
"Modeling and control of a truck steering-system for active driver support";
Betreuer/in(nen), Begutachter/in(nen): H. Nijmeijer, I. Besselink, M. Plöchl;
Eindhoven University of Technology, The Netherlands,
2018.
-
A. Lorenz:
"Modellierung von Radlader-Kenngrößen mit Bayes´schen Netzen";
Betreuer/in(nen), Begutachter/in(nen): H. Jörgl, K. Hoffmann;
Institut für Mechanik und Mechatronik 325,
2008;
Rigorosum: 30.04.2008.
Zusätzliche Informationen
-
E. Luchini:
"Model predictive control for an insulated cool box with redundant refrigeration circuits";
Betreuer/in(nen), Begutachter/in(nen): S. Jakubek, M. Kozek, R. Hofmann;
Institut für Mechanik und Mechatronik,
2018;
Rigorosum: 24.10.2018.
Zusätzliche Informationen
-
D. Lunkeit:
"Ein Beitrag zur Optimierung des Rückmelde- und Rückstellverhaltens elektromechanischer Servolenkungen";
Betreuer/in(nen), Begutachter/in(nen): D. Schramm, M. Plöchl;
Lehrstuhl für Mechatronik, Universität Duisburg-Essen,
2014;
Rigorosum: 26.03.2014.
-
A. K. Machinek:
"Anwendung der Verzweigungstheorie auf das Beulen und Nachbeulverhalten von Kreisring- und Rechteckplatten";
Betreuer/in(nen), Begutachter/in(nen): H. Troger, F. G. Rammerstorfer;
Institut für Mechanik, TU Wien,
1986.
Zusätzliche Informationen
-
F. Magerl:
"Ein Fahrmodell für die Simulation des ISO-Doppelspurwechsels";
Betreuer/in(nen), Begutachter/in(nen): P. Lugner, B. Geringer;
E325 Institut für Mechanik,
2003.
Zusätzliche Informationen
-
M. Masoumian:
"End-of-Life Management of Photovoltaics";
Betreuer/in(nen), Begutachter/in(nen): P. Kopacek, M.N. Durakbasa;
E325,
2014;
Rigorosum: 26.05.2014.
Zusätzliche Informationen
-
B. Mayer:
"Hybrid model predictive control for building energy supply systems";
Betreuer/in(nen), Begutachter/in(nen): M. Kozek, S. Jakubek, M. Horn;
Institut für Mechanik und Mechatronik,
2017;
Rigorosum: 28.04.2017.
Zusätzliche Informationen
-
C. Mayr:
"Stability Analysis and Controller Design of Local Model Networks";
Betreuer/in(nen), Begutachter/in(nen): S. Jakubek, M. Horn;
Institut für Mechanik und Mechatronik,
2013.
Zusätzliche Informationen
-
J. Metzger:
"Characterization of acoustic absorbers";
Betreuer/in(nen), Begutachter/in(nen): M. Kaltenbacher, T. Bednar;
Mechanik und Mechatronik,
2017.
Zusätzliche Informationen
-
M. Metzler:
"Automotive applications of explicit non-linear model predictive control";
Betreuer/in(nen), Begutachter/in(nen): A. Sorniotti, P. Gruber, J. Edelmann;
Department of Mechanical Engineering Sciences, University of Surrey,
2019.
-
A. Müller:
"Application Potential of RFID Technology in Disassambly of ICT-Products";
Betreuer/in(nen), Begutachter/in(nen): P. Kopacek, P.H. Osanna;
Institut für Mechanik und Mechatronik / Abt.6 Intelligente Handhabungs- und Robotertechnik,
2005.
-
F. Mutter:
"Eine effiziente Achskonzeptentwicklung durch Verwendung von Optimierungsmethoden";
Betreuer/in(nen), Begutachter/in(nen): J. Edelmann, M. Plöchl;
Institut für Mechanik und Mechatronik E325/A1,
2018.
-
M. Neusser:
"Analyse des Einflusses von Verbindungsmitteln auf das Schalldämmmaß von leichten Trennwandkonstruktionen durch realitätsnahe Modellierung von Schraub- und Klebeverbindungen";
Betreuer/in(nen), Begutachter/in(nen): T. Bednar, M. Kaltenbacher;
Technische Universität Wien | Fakultät für Bauingenieurwesen | Institut für Hochbau und Technologie | E206,
2017;
Rigorosum: 12.07.2017.
Zusätzliche Informationen
-
A. Niskanen:
"Sensing the tyre-road contact by intelligent tyre";
Betreuer/in(nen), Begutachter/in(nen): K. Tammi, A. Tuononen, M. Plöchl;
Aalto University, Finnland,
2017.
-
G. Novak:
"Multi Agent Systems. Robot Soccer";
Betreuer/in(nen), Begutachter/in(nen): P. Kopacek;
Institut für Handhabungsgeräte und Robotertechnik,
2002.
-
J. Nusime:
"Modellbildung des Lenkungsflatterns an Fahrrädern";
Betreuer/in(nen), Begutachter/in(nen): M. Plöchl, J. Edelmann, T. Angeli, P. E. Pfeffer;
Institut für Mechanik und Mechatronik E325-01,
2021.
-
F. Öztürk:
"Entwicklung und Implementierung von Innovativen integrierten Managementsystemen in der Schienenfahrzeugindustrie - Qualität und Effizienzsteigerung für Unternehmen im Eisenbahnsektor";
Betreuer/in(nen), Begutachter/in(nen): M.N. Durakbasa, P. Kopacek, K. Matyas;
311-3,
2015;
Rigorosum: 13.07.2015.
-
M. Paces:
"Sand im Rad/Schiene-Kontakt";
Betreuer/in(nen), Begutachter/in(nen): P. Lugner, N. Ostermann;
Institut für Mechanik und Mechatronik , E325/A1,
2013;
Rigorosum: 07.10.2013.
Zusätzliche Informationen
-
J. Pargfrieder:
"Development of Intelligent Control Algorithms Optimising the Energy Consumption and the User Comfort in Buildings";
Betreuer/in(nen), Begutachter/in(nen): H. Jörgl, W. Linzer;
Institut für Maschinen- und Prozessautomatisierung,
2001.
-
S. Park:
"Dynamics of heavy off-road vehicles on deformable ground";
Betreuer/in(nen), Begutachter/in(nen): A. Popov, M. Plöchl, C.H.J. Fox;
Mechanical, Materials, Manufacturing Engineering & Management, University of Nottingham,
2004.
-
D. Perchtold:
"Characterization of Permanent Magnets Used in Biased Chokes";
Betreuer/in(nen), Begutachter/in(nen): M. Kaltenbacher, D. Süss;
Mechanik und Mechatronik,
2016.
Zusätzliche Informationen
-
D. Pernsteiner:
"Advanced modeling, control and observation concepts for thermal energy systems";
Betreuer/in(nen), Begutachter/in(nen): A. Schirrer, S. Jakubek, M. Hromcik;
Mechanik und Mechatronik,
2021;
Rigorosum: 13.12.2021.
Zusätzliche Informationen
-
S. Popprath:
"Kraftmesssystem für eine mehrachsige, servohydraulische Prüfeinrichtung";
Betreuer/in(nen), Begutachter/in(nen): J. Wassermann, H. Jörgl;
Inst. für Mechanik und Mechatronik,
2006;
Rigorosum: 25.10.2006.
Zusätzliche Informationen
-
N.L. Praxmarer:
"Simulation of the Plantar Pressure Distribution for Insole Design";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, P. Lugner;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1996.
Zusätzliche Informationen
-
L. Prendl:
"Advanced Synthesis Methods for Renewable Energy Integration and Automated Data-Driven Model Adaption for Industrial Systems";
Betreuer/in(nen), Begutachter/in(nen): R. Hofmann, M. Kozek, M. Harasek;
Institut für Energietechnik und Thermodynamik,
2022;
Rigorosum: 22.04.2022.
-
R. Priesner:
"Impedance Control of Internal Combustion Engine Test Beds";
Betreuer/in(nen), Begutachter/in(nen): S. Jakubek, R. Bauer;
Insitut für Mechanik und Mechatronik E325 A5,
2013;
Rigorosum: 16.12.2013.
Zusätzliche Informationen
-
F. Pröstl Andrén:
"Model-Driven Engineering for Smart Grid Automation";
Betreuer/in(nen), Begutachter/in(nen): W. Kastner, T. Strasser;
Institut für Computer Engineering,
2018;
Rigorosum: 14.03.2018.
Zusätzliche Informationen
-
T. Pumhössel:
"Aktive Dämpfung von Balkenschwingungen mit Hilfe eines longitudinalen Piezoaktors";
Betreuer/in(nen), Begutachter/in(nen): H. Springer, A. Steindl;
Institut für Mechanik und Mechatronik,
2008;
Rigorosum: 14.07.2008.
Zusätzliche Informationen
-
B. Putz:
"Navigation mobiler, kooperativer Roboter";
Betreuer/in(nen), Begutachter/in(nen): P. Kopacek, P.H. Osanna;
Institut für Handhabungsgeräte und Robotertechnik,
2004.
-
E. Quintus:
"Entwicklung eines hochsensitiven Zustandüberwachungssystems für den Antriebsstrang von Windkraftanlagen";
Betreuer/in(nen), Begutachter/in(nen): J. Wassermann, C. Bauer;
Mechanik und Mechatronik,
2014.
-
S. Ran:
"Tyre Models for Shimmy Analysis: from linear to nonlinear";
Betreuer/in(nen), Begutachter/in(nen): H. Nijmeijer, I. Besselink, M. Plöchl;
Eindhoven University of Technology, The Netherlands,
2016.
-
W. Reichenfelser:
"Test- und Trainingsfahrrad für Personen mit Querschnittlähmung";
Betreuer/in(nen), Begutachter/in(nen): M. Gföhler, P. Lugner;
Institut f. Konstruktionswissenschaften und Technische Logistik,
2005.
Zusätzliche Informationen
-
S. Reichl:
"Inverse Dynamics and Trajectory Tracking of Underactuated Multibody Systems";
Betreuer/in(nen), Begutachter/in(nen): A. Steindl, S. Jakubek;
Institut für Mechanik und Mechatronik,
2011;
Rigorosum: 24.08.2011.
Zusätzliche Informationen
-
P. Reinisch:
"Inter-company Collaboration with Radio Frequency Identification Systems";
Betreuer/in(nen), Begutachter/in(nen): K. Matyas, P. Kopacek;
Managementwissenschaften,
2004.
Zusätzliche Informationen
-
T.J. Reiter:
"Functional Adaptation of Bone and Application in Optimal Structural Design";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, H. Troger;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1995.
Zusätzliche Informationen
-
H. Renezeder:
"On the dynamics of an axially moving cable with application to ropeways";
Betreuer/in(nen), Begutachter/in(nen): A. Steindl, F. G. Rammerstorfer;
Institut für Mechanik und Mechatronik, TU Wien,
2006;
Rigorosum: 21.02.2006.
Zusätzliche Informationen
-
H. Rezvani-Naraghi:
"Investigation of the Structural Behaviour of the CERN CMS Elecromagnetic Calorimeter Barrel Mechanical Support: Analysis and Systematic Studies";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, H. Troger;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2001.
Zusätzliche Informationen
-
M. Richtsfeld:
"Robust Range Image Processing for Robot Manipulation";
Betreuer/in(nen), Begutachter/in(nen): M. Vincze, P. Kopacek;
Institut für Automatisierungs- und Regelungstechnik,
2009;
Rigorosum: 21.12.2009.
-
K. Rouzbeh:
"Modellierung und Behandlung von Zustandsereignissen in der Systemsimulation - Alternative Methoden, Vergleich und Benchmarks";
Betreuer/in(nen), Begutachter/in(nen): F. Breitenecker, A. Körner, H. Ecker;
Institut für Analysis und Scientific Computing,
2016;
Rigorosum: 22.06.2016.
Zusätzliche Informationen
-
G. Schandl:
"Methodenuntersuchung zur aktiven Schwingungsreduktion eines Schienenfahrzeug-Wagenkastens";
Betreuer/in(nen), Begutachter/in(nen): P. Lugner, H. Jörgl;
Institut für Mechanik und Mechatronik,
2005.
-
K. Scharf:
"Beiträge zur Erfassung des Verhaltens von erdbebenerregten, oberirdischen Tankbauwerken";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, H. Troger;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1989.
Zusätzliche Informationen
-
J. Scheidl:
"Mixed kinematic modelling and simulation of slack belt drives using structural theories of rods and shells";
Betreuer/in(nen), Begutachter/in(nen): Y. Vetyukov, M. Krommer, H. E. Pettermann;
Institut für Mechanik und Mechatronik,
2021;
Rigorosum: 15.09.2021.
Zusätzliche Informationen
-
A. Schell:
"Entwicklung einer Berechnungsmethode zur Vorhersage der Schallausbreitung im Nahfeld eines umströmten Kraftfahrzeugs";
Betreuer/in(nen), Begutachter/in(nen): C. Munz, M. Kaltenbacher;
Luft- und Raumfahrttechnik und Geodäsie, Universität Stuttgart,
2014;
Rigorosum: 20.11.2014.
-
E. Schierer:
"Entwurf und Implementierung eines Controller Netzwerks für einen humanoiden Roboter";
Betreuer/in(nen), Begutachter/in(nen): P. Kopacek, R. Freund;
Institut für Mechanik und Mechatronik - Abteilung 6 Intelligente Handhabungs und Robotertechnik,
2007;
Rigorosum: 2007.
-
R. Schimpf:
"Charakterisierung von Lenksystemen mit Hilfe eines Lenksystemprüfstands";
Betreuer/in(nen), Begutachter/in(nen): H. Ecker, P. E. Pfeffer;
Mechanik und Mechatronik,
2016;
Rigorosum: 22.06.2016.
-
A. Schirrer:
"Efficient robust control design and optimization methods for flight control";
Betreuer/in(nen), Begutachter/in(nen): M. Kozek, M. Hromcik;
Institut für Mechanik und Mechatronik,
2011;
Rigorosum: 28.09.2011.
Zusätzliche Informationen
-
N. Schlachter:
"Aeroacoustics of dual-channel mass flow measurement devices";
Betreuer/in(nen), Begutachter/in(nen): M. Kaltenbacher, S. Becker;
Mechanik und Mechatronik,
2017.
-
A. J. C. Schmeitz:
"A Semi-Empirical Three-Dimensional Model of the Pneumatic Tyre Rolling over Arbitrarily Uneven Road Surfaces";
Betreuer/in(nen), Begutachter/in(nen): P. Lugner et al.;
Technische Universität Delft,
2004.
-
B. Schneeweiss:
"Entwicklung von optimierten Betriebsstrategien zur Absenkung von Kraftstoffverbrauch und Stickoxidemissionen bei einem Dieselhybridfahrzeug";
Betreuer/in(nen), Begutachter/in(nen): B. Geringer, S. Jakubek;
E315 Institut für Fahrzeugantriebe und Automobiltechnik,
2012;
Rigorosum: 16.03.2012.
Zusätzliche Informationen
-
S. Schoder:
"Aeroacoustic Analogies based on Compressible flow data";
Betreuer/in(nen), Begutachter/in(nen): M. Kaltenbacher, C. Schram, C. Munz;
Maschinenwesen und Betriebswissenschaften,
2019;
Rigorosum: 23.01.2019.
Zusätzliche Informationen
-
Ch. Schranz:
"Conversion from Imperfection-Sensitive into Insensitive Elastic Structures";
Betreuer/in(nen), Begutachter/in(nen): H.A. Mang, H. Troger;
Institut für Mechanik der Werktstoffe und Strukturen,
2005.
-
K Schulmeister:
"Modellierung und Regelung des lateralen Laufverhaltens von Stahlprozessbändern";
Betreuer/in(nen), Begutachter/in(nen): H. Jörgl, K. Hoffmann;
325A5,
2009;
Rigorosum: 08.06.2009.
-
A. Schulz:
"Entwicklung eines aktiven Magnetlagers mit hoher Betriebssicherheit";
Betreuer/in(nen), Begutachter/in(nen): J. Wassermann, W. Ahmrein;
Inst. für Mechanik und Mechatronik,
2006;
Rigorosum: 12.07.2006.
Zusätzliche Informationen
-
C. Schulze:
"Mathematische Modellbildung und Simulation zur Ableitung von Lastkollektiven in Antriebssträngen von Hybridfahrzeugen";
Betreuer/in(nen), Begutachter/in(nen): F. Breitenecker, H. Ecker;
Institut für Analysis und Scientific Computing,
2016;
Rigorosum: 28.04.2016.
-
A. Schuster:
"Modellbasierte prädiktive Regelung eines Trocknungsprozesses für Viskosestapelfasern";
Betreuer/in(nen), Begutachter/in(nen): M. Kozek, I. Marini;
Mechanik und Mechantronik,
2010;
Rigorosum: 21.01.2010.
-
M. Schwarzbart:
"Beulanalyse einer gebetteten Kreisplatte mit nicht-Euklidischer Metrik";
Betreuer/in(nen), Begutachter/in(nen): A. Steindl, F. G. Rammerstorfer;
Institut für Mechanik und Mechatronik,
2013;
Rigorosum: 18.01.2013.
Zusätzliche Informationen
-
M. Seitzberger:
"Contributions to an Efficient Numerical Analysis of the Plastic Collapse Behaviour of Thin-Walled Structures";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, H. Troger;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1999.
Zusätzliche Informationen
-
K. Sen:
"Implementation of Sensor Based Intelligent Measurement and Digitalization of Monitoring in Food Production";
Betreuer/in(nen), Begutachter/in(nen): M.N. Durakbasa, P. Kopacek, E. Pucher;
Fertigungstechnik und Hochleistungslasertechnik,
2018.
-
M Seyr:
"Autonomous Mobile Robot Motion Control";
Betreuer/in(nen), Begutachter/in(nen): H. Jörgl, H. Troger;
Institut für Mechanik und Mechatronik,
2006.
-
K. Shaposhnikov:
"Finite Element Simulation of Piezoelectric Surface Acoustic Wave Sensors";
Betreuer/in(nen), Begutachter/in(nen): M. Kaltenbacher;
Mechanik und Mechatronik,
2015.
Zusätzliche Informationen
-
K. Shaposhnikov:
"Finite-Elemente-Simulation piezoelektrischer akustischer Oberflächenwellen-Sensoren";
Betreuer/in(nen), Begutachter/in(nen): M. Kaltenbacher, F. Rammerstorfer;
Mechanik und Mechatronik,
2015;
Rigorosum: 21.12.2015.
-
H. Sima:
"Erhöhung der erzielbaren Speicherzeit von magnetisch gelagerten Schwungradspeichern";
Betreuer/in(nen), Begutachter/in(nen): M. Kaltenbacher, E. Schmidt, A. Schulz;
E325/A4,
2015.
-
G. Simon:
"Modeling and Simulation of Bulging in a Continuous Casting Machine";
Betreuer/in(nen), Begutachter/in(nen): H Irschik, M. Krommer;
Institut für Technische Mechanik / JKU Linz,
2015;
Rigorosum: 19.10.2015.
-
S. Sinanovic:
"Identifikation des Wiener-Modells mit Least-Squares Methoden für Anesthesie Anwendungen";
Betreuer/in(nen), Begutachter/in(nen): H. Jörgl, F. Rattay;
E325,
2007;
Rigorosum: 30.04.2007.
-
I.C. Skrna-Jakl:
"Numerical and Experimental Investigations of Interlaminar Stresses and Free Edge Effects in Integrally Stiffened, Layered Composite Panels";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, H. Troger;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1994.
Zusätzliche Informationen
-
G. Sommer:
"Robot Motion Planning with Genetic Algorithms";
Betreuer/in(nen), Begutachter/in(nen): P. Kopacek, P.H. Osanna;
Institut für Mechanik und Mechatronik / Abt.6 Intelligente Handhabungs- und Robotertechnik,
2005.
-
M. Stadlbauer:
"Optimization of Excitation Signals for Nonlinear Systems";
Betreuer/in(nen), Begutachter/in(nen): S. Jakubek, H. Eichlseder;
Institut für Mechanik und Mechatronik,
2013;
Rigorosum: 25.07.2013.
Zusätzliche Informationen
-
A. Starlinger:
"Development of Efficient Finite Shell Elements for the Analysis of Sandwich Structures under Large Deformations and Global as well as Local Instabilities";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, H. Troger;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1990.
Zusätzliche Informationen
-
M.A. Stiftinger:
"Semi-Analytical Finite Element Formulations for Layered Shells with Consideration of Edge Effects";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, H. Troger;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1996.
Zusätzliche Informationen
-
M. Stoll:
"Die Weiterentwicklung von Organisationen u. zugehörigen Managementsystemen mit Förderung des Wissensmanagements durch den Einsatz einer konstruktivistischen organisationalen Lern- u. Wissensplattform";
Betreuer/in(nen), Begutachter/in(nen): P.H. Osanna, P. Kopacek;
Institut für Fertigungstechnik - Abteilung für Austauschbau und Messtechnik,
2007;
Rigorosum: 2007.
-
T. Strasser:
"Einsatz von künstlichen neuronalen Netzen zur Messdatenplausibilitätsprüfung bei automatischen Messungen an Motorprüfständen";
Betreuer/in(nen), Begutachter/in(nen): H. Jörgl, B. Geringer;
Institut für Maschinen- und Prozessautomatisierung,
2003;
Rigorosum: 23.09.2003.
Zusätzliche Informationen
-
A.J. Svobodnik:
"Numerical Treatment of the Elastic-Plastic Macromechanical Behavior of Longfiber-Reinforced Metal Matrix Composites";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, H. Troger;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1990.
Zusätzliche Informationen
-
H. Tahirova:
"TQM, LCA und Nachhaltige Entwicklung unterstützt durch intelligente flexible Metrologie und Demontage und Wiederverwertung gebrauchten Produkten in unterschiedlich industrialisierter Umgebung";
Betreuer/in(nen), Begutachter/in(nen): P.H. Osanna, P. Kopacek;
Institut für Mechanik und Mechatronik - Abteilung 6 Intelligente Handhabungs- und Robotertechnik,
2006;
Rigorosum: 2006.
-
E. Talic:
"A real-time railway catenary model for Hardware-in-the-Loop tests";
Betreuer/in(nen), Begutachter/in(nen): M. Kozek, S. Jakubek, J. Kunovsky;
Inst. für Mechanik und Mechatronik,
2016;
Rigorosum: 28.09.2016.
Zusätzliche Informationen
-
A. Teufel:
"A Contribution to Self-excited Oscillations: Smooth and non-smooth Bifurcation Analysis in Applied Mechanical Systems";
Betreuer/in(nen), Begutachter/in(nen): H. Troger, H. Springer;
Institut für Mechanik und Mechatronik,
2007;
Rigorosum: 05.11.2007.
Zusätzliche Informationen
-
D. Tumpold:
"Modeling and Optimization Methods of an Electrostatically driven MEMS Speaker";
Betreuer/in(nen), Begutachter/in(nen): M. Kaltenbacher, U. Schmid;
Mechanics and Mechatronics E325,
2014;
Rigorosum: 26.02.2014.
Zusätzliche Informationen
-
D. Tumpolt:
"Modeling and Optimization Methods of an Electrostatically driven MEMS Speaker";
Betreuer/in(nen), Begutachter/in(nen): M. Kaltenbacher, U. Schmidt;
Mechanik und Mechatronik,
2014.
-
M. Tutz:
"Das menschliche Bein als elastisches Mehrkörpersystem";
Betreuer/in(nen), Begutachter/in(nen): H. Schmiedmayer;
E 325-1 Institut für Mechanik und Mechatronik,
2004.
-
A. Uselmann:
"Ein Beitrag zur funktionalen Entwicklung eines elektromechanischen Lenksystems für sportlich orientierte Fahrzeuge";
Betreuer/in(nen), Begutachter/in(nen): D. Schramm, M. Plöchl;
Lehrstuhl für Mechatronik, Universität Duisburg-Essen,
2017.
-
M. Vignati:
"Innovative control strategies for 4WD electric/hybrid vehicles";
Betreuer/in(nen), Begutachter/in(nen): E. Sabbioni, F. Cheli, J. Edelmann;
Dipartimento di Meccanica, Politecnico di Milano,
2017.
-
J. Vilsecker:
"Dynamische Einflüsse von Weichenüberfahrten auf Straßenbahnzüge";
Betreuer/in(nen), Begutachter/in(nen): M. Plöchl, N. Ostermann;
Institut für Mechanik und Mechatronik, E325/A1,
2014.
-
A. Volk:
"Materialdatencharakterisierung, Modellierung und numerische Simulation der Magnetostriktion in Leistungstransformatoren";
Betreuer/in(nen), Begutachter/in(nen): M. Kaltenbacher, H. Albach;
Sensorik,
2016;
Rigorosum: 17.11.2016.
-
W.K. Vonach:
"A General Solution to the Wrinkling Problem of Sandwiches";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, H. Troger;
Institut für Leichtbau und Flugzeugbau, TU Wien,
2001.
Zusätzliche Informationen
-
H. Walter:
"Numerische Simulation des transienten Verhaltens von Naturumlaufdampferzeugern";
Betreuer/in(nen), Begutachter/in(nen): W. Linzer, H. Jörgl;
Institut für Technische Wärmelehre,
2000.
-
X. Wang:
"Finite Strip Formulations for Strength, Buckling and Post-Buckling Analysis of Stiffened Plates";
Betreuer/in(nen), Begutachter/in(nen): F. G. Rammerstorfer, H. Troger;
Institut für Leichtbau und Flugzeugbau, TU Wien,
1994.
Zusätzliche Informationen
-
A. Wasserburger:
"Stochastic Methods for Handling Uncertainties in Automotive Applications";
Betreuer/in(nen), Begutachter/in(nen): C. Hametner, S. Jakubek, T. Katrasnik;
Mechanik und Mechatronik,
2021;
Rigorosum: 03.08.2021.
Zusätzliche Informationen
-
C. Westermayer:
"2DOF parameter-dependent longitudinal control of a blended wing body flexible aircraft";
Betreuer/in(nen), Begutachter/in(nen): M. Kozek, M. Hromcik;
Institut für Mechanik und Mechatronik,
2011;
Rigorosum: 28.09.2011.
Zusätzliche Informationen
-
R. Wimmer:
"Die Sichtweise von AbsolventInnen der TU Wien auf das Bildungsangebot im Bereich postgradualer Masterprogramme";
Betreuer/in(nen), Begutachter/in(nen): A. Stepan, P. Kopacek;
Inst.f.Managementwissenschaften,
2010.
-
M. Würzl:
"Ein Beitrag zur Robotik speziell im Bereich der Multiagenten- und Expertensysteme";
Betreuer/in(nen), Begutachter/in(nen): P. Kopacek, R. Freund;
Institut für Mechanik und Mechatronik / Abt.6 Intelligente Handhabungs- und Robotertechnik,
2005.
-
K. Yaghmaei:
"Direct and Indirect Methods for Micro/Nano Characterisation of Dimensional and Functional Properties of Engineering Surfaces";
Betreuer/in(nen), Begutachter/in(nen): P.H. Osanna, P. Kopacek;
Institut für Ferigungstechnik,
2005.
-
D. Yang:
"Vehicle Dynamics Control after lmpacts in Multiple-Event Accidents";
Betreuer/in(nen), Begutachter/in(nen): B. Jacobson, M. Lidberg, M. Plöchl;
Chalmers University of Technolgoy, Göteborg, Sweden,
2013.
-
C. Zanabria:
"Adaptable Engineering Support Framework for Multi-Functional Battery Energy Storage Systems";
Betreuer/in(nen), Begutachter/in(nen): T. Strasser, W. Kastner, A. Zoitl;
Institut für Mechanik und Mechatronik,
2018;
Rigorosum: 13.12.2018.
Zusätzliche Informationen
-
N. Zandi:
"Internationale Kooperation zusammenarbeitender Klein- und Mittelbetriebe";
Betreuer/in(nen), Begutachter/in(nen): P.H. Osanna, P. Kopacek;
Institut für Fertigungstechnik - Abteilung für Austauschbau und Messtechnik,
2007;
Rigorosum: 2007.
-
C. Zauner:
"Methode zur Analyse von Fahrzeugachsen und Identifikation von Parametereinflüssen im komfortrelevanten Frequenzbereich";
Betreuer/in(nen), Begutachter/in(nen): M. Plöchl, J. Edelmann;
Institut für Mechanik und Mechatronik E325/A1,
2018.
-
H. Zebedin:
"Planung und Inbetriebnahme einer semiautomatischen modularen Demontagezelle für die Elektronikindustrie";
Betreuer/in(nen), Begutachter/in(nen): P. Kopacek;
Institut für Handhabungsgeräte und Robotertechnik,
2002.
-
W. H. Zisser:
"Electromigration in Interconnect Structures";
Betreuer/in(nen), Begutachter/in(nen): S. Selberherr, M. Kaltenbacher;
Institut für Mikroelektronik,
2016;
Rigorosum: 21.06.2016.
Zusätzliche Informationen
-
S. Zörner:
"Numerical simulation method for a precise calculation of the human phonation under realistic conditions";
Betreuer/in(nen), Begutachter/in(nen): M. Kaltenbacher, M. Döllinger;
Institut für Mechanik und Mechatronik,
2014;
Rigorosum: 30.01.2014.
Zusätzliche Informationen
-
S. Zörner:
"Numerisches Simulationsverfahren für die präzise Berechnung der menschlichen Phonation unter realen Bedingungen";
Betreuer/in(nen), Begutachter/in(nen): M. Kaltenbacher, M. Döllinger;
Mechanik und Mechatronik,
2014.
Zusätzliche Informationen
Diplom- und Master-Arbeiten (eigene und betreute)
-
H Adrigan:
"Entwicklung eines Komponetenprüfstandes für Magnetschienenbremsenspurhalter";
Betreuer/in(nen): H. Ecker;
Mechanik und Mechatronik,
2016;
Abschlussprüfung: 29.09.2016.
-
J. Aigner:
"End of Life Management of Automation Devices";
Betreuer/in(nen): P. Kopacek;
Institut für Mechanik und Mechatronik / Abt.6 Intelligente Handhabungs- und Robotertechnik,
2005.
-
M Aigner:
"Optimierte Modellbildung eines Motorradrahmens";
Betreuer/in(nen): H. Ecker, F Harnischmacher;
Institut für Mechanik und Mechatronik,
2020;
Abschlussprüfung: 24.09.2020.
Zusätzliche Informationen
-
J. Al-Eryani:
""MAMoRo - A Modular Autonomous Mobile Robot Platform"";
Betreuer/in(nen): P. Kopacek;
Institut für Mechanik und Mechatronik,
2007;
Abschlussprüfung: 15.06.2007.
-
J. Al-Eryani:
"MAMoRo - A Biologically Inspired Modular Autonomous Mobile Robot Platform";
Betreuer/in(nen): P. Kopacek;
Institut für Mechanik und Mechatronik - Abteilung 6 Intelligente Handhabungs und Robotertechnik,
2007;
Abschlussprüfung: 2007.
-
H. Amri:
"Simulation der Energieeffizienz einer Heizungs- und Lüftungsanlage bei Schienenfahrzeugen mt bedarfsabhängiger Regelung der Lüftung";
Betreuer/in(nen): M. Kozek, R. Hofstädter;
Institut für Mechanik und Mechatronik,
2010;
Abschlussprüfung: 2010.
-
B. Angrosch:
"Fahrradstabilität unter besonderer Berücksichtigung des Lenkungsflatterns";
Betreuer/in(nen): M. Plöchl;
Institut für Mechanik und Mechatronik, A1- Fahrzeugdynamik und Biomechanik,
2010.
-
G. Aschauer:
"Physically based modelling of a high-speed pantograph";
Betreuer/in(nen): M. Kozek, A. Schirrer;
E325-5 Institut für Mechanik und Mechatronik,
2014;
Abschlussprüfung: 27.11.2014.
Zusätzliche Informationen
-
S. Ausserhofer:
"Simulationsmodell des Antriebsstrangs eines Fahrzeugs";
Betreuer/in(nen): M. Plöchl;
Institut für Mechanik und Mechatronik,
2007.
-
L. Balzer:
"Predictive Pulse Pattern Control for Electrical Component Test Systems";
Betreuer/in(nen): S. Jakubek;
Institut für Mechanik und Mechatronik,
2018;
Abschlussprüfung: 20.08.2018.
-
A. Bauer:
"Entwicklung einer Methode zur verbesserten Beschreibung von Gleislagefehlern für die Auslegung von Straßenbahnfahrzeugen";
Betreuer/in(nen): K.-O. Endlicher, J. Edelmann;
Institut für Mechanik und Mechatronik E325/A1,
2015.
-
M. Bauer:
"Einfluss der Fahrzeugmodellbildung auf Karosserie- und Fahrwerkskräfte bei der Überfahrt von Extremhindernissen";
Betreuer/in(nen): M. Plöchl;
Institut für Mechanik und Mechatronik, E325/A1,
2012.
-
E. Baykal:
"Auswertung und Analyse von Fahrkomfortmessungen";
Betreuer/in(nen): W. Mack;
Institut für Mechanik und Mechatronik, E325/A1,
2012.
-
A. Ben Arbia:
"Modellierung der Kolbenführung unter Berücksichtigung von Kolbenkippen und Reibung im Kurbeltrieb mit der MKS Methode";
Betreuer/in(nen): H. Springer, Th. Mrazek;
Inst. für Mechanik und Mechatronik (E325),
2006;
Abschlussprüfung: 12.10.2006.
-
D. Benold:
"Regelung eines Universalgelenkes für humanoide Roboter mit einem bürstenlosen Gleichstrommotor";
Betreuer/in(nen): P. Kopacek;
Institut für Mechanik und Mechatronik,
2007;
Abschlussprüfung: 26.04.2007.
-
H. Berger:
"Rheologische Dämpfermodelle für den Einsatz in der MKS-Simulation";
Betreuer/in(nen): W. Mack;
Institut für Mechanik und Mechatronik,
2002.
-
M. Berger:
"Ein mobiler Miniroboter für Sonderanwendungen";
Betreuer/in(nen): M. Han;
Institut für Handhabungsgeräte und Robotertechnik,
2004.
-
C. Bilik:
"Aufbau und Inbetrieb des Prüfstandmodelles eines Schienenfahrzeug Wagenkastens zum Nachweis von aktiver Schwingungsdämpfung";
Betreuer/in(nen): H. Jörgl, M. Kozek;
Institut für Mechanik und Mechatronik,
2006.
-
C. Binder:
"Influence of human mass and posture on the rollover characteristics of carriages";
Betreuer/in(nen): H. Schmiedmayer;
Institut für Mechanik und Mechatronik E325/A1,
2016.
-
M. Biribauer:
"Ein Bildverarbeitungssystem zur Navigation mobiler Roboter";
Betreuer/in(nen): P. Kopacek;
Institut für Handhabungsgeräte und Robotertechnik,
2002.
-
A Birnecker:
"Berechnung der Schwingungen von Papierleitwalzen aufgrund anisotroper Biegesteifigkeit";
Betreuer/in(nen): H. Ecker;
Institut für Mechanik und Mechatronik,
2011;
Abschlussprüfung: 30.06.2011.
-
L. Bitschnau:
"Modellbildung eines Kran-Hubwerks mit hydraulischem Hybridantrieb";
Betreuer/in(nen): H. Jörgl, M. Kozek;
Institut für Mechanik und Mechatronik 325,
2008;
Abschlussprüfung: 26.11.2008.
-
I. Bladerer:
"Akustische und schwingungstechnische Charakterisierung eines Innentrommelprüfstands";
Betreuer/in(nen): M. Kaltenbacher, S. Gombots;
Mechanik und Menchatronik,
2019;
Abschlussprüfung: 31.01.2019.
-
L. Böhler:
"Dynamische Simulation eines Vertikalförderers zum Beschicken bzw. Garagieren von Seilbahnkabinen";
Betreuer/in(nen): H. Schmiedmayer, J. Edelmann;
Institut für Mechanik und Mechatronik E325/A1,
2015.
-
M. Brandstetter:
"Nonlinear Hierarchical Control for Smart Buildings in Electrical Grids";
Betreuer/in(nen): M. Kozek, A. Schirrer;
Institut für Mechanik und Mechatronik,
2014.
-
G. Brantner:
"Advanced Control Concepts for a 3-DOF Laboratory Helicopter: Development and Application";
Betreuer/in(nen): S. Jakubek, A. Schirrer, G. Fuchs;
Institut für Mechanik und Mechatronik,
2010;
Abschlussprüfung: 23.06.2010.
Zusätzliche Informationen
-
M. Brazda:
"Neural Net Controlled Autonomous Hyper-Redundant Manipulator Systems";
Betreuer/in(nen): P. Kopacek;
Institut für Mechanik und Mechatronik / Abt.6 Intelligente Handhabungs- und Robotertechnik,
2004.
-
S. Brötz:
"Untersuchung zur Verbesserung des Crashverhaltens eines 2-Kammer-Profils";
Betreuer/in(nen): M. Krommer;
Institut für Mechanik und Mechatronik,
2017;
Abschlussprüfung: 18.05.2017.
-
M. Buchheit:
"Entwicklung einer graph. Benutzeroberfläche zur übersichtlichen Darstellung komplexer, mechan. Anlagen samt Berechnung anlagenspezifischer Schadensfrequenzen";
Betreuer/in(nen): J. Wassermann;
Mechanik und Mechatronik,
2015.
-
B. Buchinger:
"Regelung einer tribologischen Prüfeinrichtung";
Betreuer/in(nen): J. Wassermann;
Mechanik und Mechatronik,
2014.
-
R. Bunzl:
"A Contribution to the Use of Robots for Humanitarian Demining";
Betreuer/in(nen): P. Kopacek;
Institut für Handhabungsgeräte und Robotertechnik,
2002.
-
M. Daucher:
"Noise and vibration behaviour of hybrid bearings";
Betreuer/in(nen): J. Wassermann;
Mechanik und Mechatronik,
2017.
-
Maxime Deregnaucourt:
"Produktionsoptimierung für das Hamburger Dornbiegeverfahren mittels statistischem Methodenansatz";
Betreuer/in(nen): M. Kozek;
Institut für Mechanik und Mechatronik,
2010;
Abschlussprüfung: 28.06.2010.
-
C. Deubel:
"Anwendung humanoider Roboter zur Therapie von Menschen mit Behinderung(Magisterarbeit)";
Betreuer/in(nen): P. Kopacek;
Institut für Mechanik und Mechatronik - Abteilung 6 Intelligente Handhabungs- und Robotertechnik,
2006;
Abschlussprüfung: 2006.
-
M. Dietl:
"Ultracapacitor and battery sizing in heavy-duty fuel cell vehicles to improve hydrogen economy and system lifetime";
Betreuer/in(nen): C. Hametner, A. Ferrara;
Institut für Mechanik und Mechatronik,
2021.
-
L. Dietzel:
"Untersuchung des Einsatzes von Gurten mit veränderlicher Breite im Frontcrash von Fahrzeugen zur Vergrößerung des Schutzpotentials der Insassen";
Betreuer/in(nen): H. Schmiedmayer;
Institut für Mechanik und Mechatronik E325/A1,
2015.
-
N. Dikme:
"Beitrag zur semiautomatisierten Demontage";
Betreuer/in(nen): P. Kopacek;
Institut für Mechanik und Mechatronik / Abt.6 Intelligente Handhabungs- und Robotertechnik,
2004.
-
H. Dillinger:
"Autoadaptive Einstellungsanpassung für ein mikroprozessorgesteuertes Prothesenkniegelenk";
Betreuer/in(nen): H. Schmiedmayer;
E325,
2017;
Abschlussprüfung: 27.04.2017.
-
A. Dobnig:
"Optimierung einer indirekten 3D-Kraftmesseinrichtung";
Betreuer/in(nen): J. Wassermann;
Inst. für Mechanik und Mechatronik,
2006;
Abschlussprüfung: 2006.
-
P. Dolovai:
"Modellbasierte Regelung für Gasmotoren";
Betreuer/in(nen): H. Jörgl, M. Kozek;
325 - 5,
2005.
Zusätzliche Informationen
-
D. Duller:
"Impedanzregelung eines Linearmotors in einem Hardware-in-the-Loop-Prüfstand";
Betreuer/in(nen): S. Jakubek, A. Schirrer;
E325,
2018;
Abschlussprüfung: 26.04.2018.
-
C. Dullinger:
"Comparison of optimal and robust MIMO control concepts for active vibration damping of a flexible beam laboratory setup";
Betreuer/in(nen): M. Kozek, A. Schirrer;
Institut für Mechanik und Mechatronik,
2013.
-
R. Duy:
"Fictitious Domain Approach for Optimizing Stability Boundaries of Plates with Cutouts";
Betreuer/in(nen): Y. Vetyukov;
Institut für Mechanik und Mechatronik,
2021;
Abschlussprüfung: 02/2021.
Zusätzliche Informationen
-
D. Dzombic:
"Entwicklung einer digitalen Regelung und Fehlererkennung mit höchster Zuverlässigkeit";
Betreuer/in(nen): J. Wassermann, A. Schulz;
Institut für Mechanik und Mechatronik,
2008;
Abschlussprüfung: 28.11.2008.
-
B. Ebner:
"Simulationsmodell zur Analyse und Optimierung eines Scheibenwischer-Antriebs";
Betreuer/in(nen): J. Edelmann, M. Plöchl;
Institut für Mechanik und Mechatronik E325-01,
2021.
-
M. Eckl:
"Konzeptionierung, Aufbau und Test eines rechnergesteuerten Ausblassystems zur optinierten Ausbringung von Sortiergut";
Betreuer/in(nen): H. Jörgl;
Inst. f. Maschinen- und Prozess-Automatisierung,
2003.
-
J. Edelmann:
"Pkw-Fahrermodell für höhere Querbeschleunigungen";
Betreuer/in(nen): M. Plöchl;
E 325-1 Mechanik und Mechatronik,
2004.
Zusätzliche Informationen
-
F. Egner:
"Akustische Charakterisierung von Luftkanälen";
Betreuer/in(nen): M. Kaltenbacher, S. Floss;
Mechanik und Menchatronik,
2018;
Abschlussprüfung: 23.07.2018.
Zusätzliche Informationen
-
M. Eibl:
"Von der Idee zur Innovation und darüber hinaus - am Beispiel eines urbanen Elektroleichtfahrzeuges";
Betreuer/in(nen): J. Edelmann, M. Plöchl;
Institut für Mechanik und Mechatronik E325/A1,
2013.
-
D. Einarsson:
"Efficient determination of the contact-specific Jacobian in an oil film lubricated clearance gap based on a reduced order model of the Reynolds equation";
Betreuer/in(nen): S. Jakubek, N. Euler-Rolle;
Institut für Mechanik und Mechatronik,
2015;
Abschlussprüfung: 18.06.2015.
Zusätzliche Informationen
-
R. Engelmann:
"Application of deconvolution on the turbulent boundary layer wall pressure spectrum";
Betreuer/in(nen): M. Kaltenbacher;
Mechanik und Mechatronik,
2018.
-
S. Engleder:
"Analyse innovativer Produktionsstrategien unter Berücksichtigung der Wirtschaftlichkeit in der Blechfertigung der Firma Trumpf Werkzeugmaschinen GmbH + Co.KG";
Betreuer/in(nen): H. Weseslindtner;
E 311 Fertigungstechnik,
2002.
-
R. Enne:
"Fahrermodell für die Regelung der Längsdynamik eines Kraftfahrzeuges";
Betreuer/in(nen): M. Plöchl, J. Edelmann;
Institut für Mechanik und Mechatronik, Abt. für Fahrzeugdynamik und Biomechanik,
2006.
-
D. Erdogan:
"Schlupfregelung und Schwingungsprävention bei Fahrzeugen mit elektrischem Antrieb";
Betreuer/in(nen): S. Jakubek, M. Kozek, J. Edelmann;
Institut für Mechanik und Mechatronik E325,
2018.
-
N. Euler-Rolle:
"Model order reduction by projection applied to the universal Reynolds' equation";
Betreuer/in(nen): S. Jakubek;
Institut für Mechanik und Mechatronik,
2012;
Abschlussprüfung: 05.12.2012.
Zusätzliche Informationen
-
G. Feik:
"Entwicklung einer Kraft- und Momentenmesseinrichtung an den Pedalen eines Fahrrades";
Betreuer/in(nen): H. Springer, J. Wassermann;
Inst. für Maschinendynamik und Messtechnik,
2003;
Abschlussprüfung: 2003.
-
T. Feilmair:
"Lastdatengenerierung für die Auslegung von elektrischen PKW-Antrieben";
Betreuer/in(nen): M. Weigand, J. Edelmann;
Institut für Konstruktionswissenschaften und Technische Logistik E307,
2017.
-
D.W. Fenz:
"Simulation des dynamischen Verhaltens eines Warmwalzgerüstes zur Entkopplung von Banddicke und Walzendrehzahl";
Betreuer/in(nen): H. Jörgl;
Institut für Maschinen- und Prozessautomatisierung,
1999.
-
T. Ferdigg:
"Einfluss der Elastomerlagermodelle auf simuliertes Eigenfrequenz- und Schwingverhalten von Achs-Subsystemen";
Betreuer/in(nen): W. Mack;
Institut für Mechanik und Mechatronik E325-01,
2021.
-
D. Fernandez:
"A flexible semi-automatized Cell for Disassembly of TV-Sets";
Betreuer/in(nen): P. Kopacek;
Institut für Mechanik und Mechatronik / Abt.6 Intelligente Handhabungs- und Robotertechnik,
2004.
-
A Fichtinger:
"Experimentelle und numerische Untersuchung des Energietransfers in parametererregten Systemen";
Betreuer/in(nen): H. Ecker;
Mechanik und Mechatronik,
2015;
Abschlussprüfung: 2015.
-
P. Finsterwalder:
"Aufbau und Kalibrierung eines Multivektor-Mess-Distraktors";
Betreuer/in(nen): J. Wassermann;
E325-4 Institut für Mechanik und Mechatronik,
2010;
Abschlussprüfung: 24.11.2010.
Zusätzliche Informationen
-
G. Florl:
"Magnetlager-Versuchsstand mit großem Luftspalt";
Betreuer/in(nen): J. Wassermann;
Inst. für Mechanik und Mechatronik,
2004;
Abschlussprüfung: 2004.
-
S. Floss:
"Möglichkeiten zur Schallreduktion in einer Klimaanlage der Firma Liebherr: Simulation und Experiment von Sebastian Floss";
Betreuer/in(nen): M. Kaltenbacher;
Mechanik und Mechatronik,
2017.
Zusätzliche Informationen
-
G. Fuchs:
"Entwicklung von Steuerungskennzahlen und Organisationsoptimierung für das Hauptdepot eines Paketdienstes ";
Betreuer/in(nen): P. Kopacek;
Institut für Handhabungsgeräte und Robotertechnik,
2004.
-
G. Fuchs:
"Measurement and Control of a Pneumatic Solar Concentrator";
Betreuer/in(nen): K. Ponweiser;
Institut für Thermodynamik und Energiewandlung,
2008.
-
M. Fuhrmann:
"Non-linear control and disturbance rejection for longitudinal tunnel ventilation";
Betreuer/in(nen): S. Jakubek, N. Euler-Rolle;
Institut für Mechanik und Mechatronik,
2016;
Abschlussprüfung: 28.09.2016.
Zusätzliche Informationen
-
W. Gabryel:
"Höhenlage und Verzurrung von Militärkraftfahrzeugen";
Betreuer/in(nen): M. Plöchl;
Institut für Mechanik und Mechatronik,
2008;
Abschlussprüfung: 02.10.2008.
-
A. Gamez Sangra:
"Design and Modelling of an Active Magnetic Bearing Test Stand";
Betreuer/in(nen): J. Wassermann, A. Schulz;
Institut für Mechanik und Mechatronik,
2007;
Abschlussprüfung: 27.07.2007.
-
I. Gellai:
"Untersuchung von Alterungsprädiktionsmodellen für Lithium-Ionen Batterien";
Betreuer/in(nen): C. Hametner;
Institut für Mechanik und Mechatronik,
2017.
-
A. Geppl:
"Ein kombiniertes Fahrermodell für Vertikal- und Längsdynamik zur Entwicklung autonomer Fahrfunktionen";
Betreuer/in(nen): J. Edelmann, M. Plöchl;
Institut für Mechanik und Mechatronik E325/A1,
2016.
-
D. Giefing:
"Fahrdynamiksimulation des Konzepts Y-Rail in Simpack";
Betreuer/in(nen): P. Lugner, J. Edelmann;
Institut für Mechanik und Mechatronik,
2008.
-
P. Gmeiner:
"Dynamische Untersuchung eines Portalkrans mittels Mehrkörpersimulation";
Betreuer/in(nen): J. Edelmann;
Institut für Mechanik und Mechatronik E325/A1,
2018.
-
G Görtler:
"Ein Simulationsprogramm zur Model Reference Adaptive Control (MRAC) für lineare Regelstrecken";
Betreuer/in(nen): H. Jörgl, M. Kozek;
E 325 A5,
1997.
-
M. Gössl:
"Entwicklung einer Motorsteuerung für ein mehrachsiges Aktorsystem";
Betreuer/in(nen): J. Wassermann;
Mechanik und Mechatronik,
2015.
Zusätzliche Informationen
-
S. Gombots:
"Aufbau, Inbetriebnahme und Charakterisierung eines Mikrofonarrays";
Betreuer/in(nen): M. Kaltenbacher;
Mechanik und Mechatronik,
2015.
Zusätzliche Informationen
-
G. Graf:
"Machbarkeitsstudie Direktantrieb einer Rundwebmaschine";
Betreuer/in(nen): J. Wassermann;
Mechanik und Mechatronik,
2017.
-
A. Grausam:
"Untersuchung der Reaktionskinetik im Vanadiumröstprozess zur Anwendung in der regelungstechnischen Modellbildung";
Betreuer/in(nen): H. Jörgl, B. Voglauer;
Inst. f. Maschinen- und Prozess-Automatisierung,
2003.
-
T. Gröger:
"Marketingkonzept für einen Humanoiden Roboter";
Betreuer/in(nen): P. Kopacek;
Institut für Mechanik und Mechatronik - Abteilung 6 Intelligente Handhabungs- und Robotertechnik,
2006;
Abschlussprüfung: 2006.
-
B. Gross:
"Regelung eines Wechselstrommagnetjochs";
Betreuer/in(nen): H. Jörgl, M. Kozek;
325 - 5,
2005.
-
L. Gugler:
"Potential für Energy-Harvesting am bewegten menschlichen Körper";
Betreuer/in(nen): H. Ecker, H. Schmiedmayer;
Institut für Mechanik und Mechatronik,
2013;
Abschlussprüfung: 16.12.2013.
-
L. Haffner:
"Dynamische Modellbildung, Simulation und Konstruktion eines Dampfinjektors zur Haltbarmachung von Produkten bei reduzierter Wärmebelastung";
Betreuer/in(nen): H. Jörgl, M. Kozek;
325 - 5,
2005.
-
A. Hager:
"Verbesserung des mechanischen Aufbaus von Minirobotern";
Betreuer/in(nen): P. Kopacek;
Institut für Handhabungsgeräte und Robotertechnik,
2003.
-
A. Hahn:
"Konsistente werkzeuggestützte Konfiguration komplexer Motor- und Antriebstrangprüfsysteme";
Betreuer/in(nen): H. Jörgl;
Inst. f. Maschinen- und Prozess-Automatisierung,
2003.
-
M. Haider:
"Entwicklung eines mehrachsigen mikroprozessorgesteuerten Kniegelenks";
Betreuer/in(nen): H. Schmiedmayer;
Institut für Mechanik und Mechatronik E325/A1,
2014.
-
C. Hametner:
"Identifikation von Hammerstein- und Wiener-Modellen mit dem RLS-Algorithmus";
Betreuer/in(nen): H. Jörgl, M. Kozek;
325 - 5,
2005.
-
M. Hametner:
"Realisierung eines optischen Sensorsystems zur Rotorpositions- und Drehzahlerfassung für hochdrehende magn. gelagerte Schwungradspeicher";
Betreuer/in(nen): J. Wassermann;
Mechanik und Mechatronik,
2014.
-
M. Hammel:
"Ein Beitrag zur Realisierung einer semi-automatischen modularen Demontageanlage";
Betreuer/in(nen): P. Kopacek;
Institut für Handhabungsgeräte und Robotertechnik,
2003.
-
P. Hanner:
"Möglichkeiten einer automatischen Fehlererkennung in Vorprodukten zur LKW Reifenproduktion";
Betreuer/in(nen): J. Wassermann;
Inst. für Mechanik und Mechatronik,
2004;
Abschlussprüfung: 2004.
-
E. Hansy-Staudigl:
"Impact of different Spray Patterns on Mixture-Preparation and Pre-Ignition Tendency of a Direct-Injection Gasoline Engine";
Betreuer/in(nen): M. Heiß, T. Lauer;
Institut für Fahrzeugantriebe und Automobiltechnik,
2015;
Abschlussprüfung: 14.01.2015.
Zusätzliche Informationen
-
S. Hartl:
"Magnetic properties of deformed electric steel";
Betreuer/in(nen): J. Wassermann;
Mechanik und Mechatronik,
2014.
-
M. Hashemi:
"Product-Service-Shift";
Betreuer/in(nen): P. Kopacek;
Institut für Handhabungsgeräte und Robotertechnik,
2002.
-
M. Haubner:
"Unternehmenskooperationen in Elektronikaltgerätebetrieben";
Betreuer/in(nen): P. Kopacek;
Institut für Handhabungsgeräte und Robotertechnik,
2002.
-
M. Haudum:
"Entwurf und Simulation eines Fahrermodells zum Lenken und Stabilisieren von Fahrrädern";
Betreuer/in(nen): M. Plöchl;
Institut für Mechanik und Mechatronik, E325/A1,
2012.
-
S. Helm:
"Identifikation von Wiener-Modellen mittels optimaler, lokal linearer Modelle";
Betreuer/in(nen): H. Jörgl, M. Kozek, J. Wassermann;
E325 A5,
2007;
Abschlussprüfung: 11/2007.
Zusätzliche Informationen
-
G. Hiller:
"Vehicle stability in powerslide driving condtion";
Betreuer/in(nen): M. Plöchl, J. Edelmann;
Institut für Mechanik und Mechatronik E325/A1,
2009.
-
T. Hinderer:
"Simulation des Ventiltriebs des BMW IT-Boxer Motors";
Betreuer/in(nen): H. Springer, H. Ecker;
Inst. für Maschinendynamik und Messtechnik,
2003.
-
F. Höftberger:
"Aktive Schwingungsunterdrückung an smarten Strukturen";
Betreuer/in(nen): H. Jörgl, M. Kozek;
Institut für Mechanik und Mechatronik,
2005.
-
T. Hofmann:
"Implementierung eines 3D-CAD-Modells einer Armorthese in die Biomechanik-Simulationssoftware OpenSim";
Betreuer/in(nen): M. Gföhler, H. Schmiedmayer;
307,
2013;
Abschlussprüfung: 28.01.2013.
-
F. Hohensinn:
"Aufbau und Validierung eines Fahrdynamikmodelles für Motorräder";
Betreuer/in(nen): M. Plöchl, J. Edelmann;
Institut für Mechanik und Mechatronik, E325/A1,
2012.
-
B. Hopfner:
"Numerische Studien und Prüfstandskonzept eines Drehschwingungssystems unter Dirac-Impulskrafterregung";
Betreuer/in(nen): H. Ecker;
Mechanik und Mechatronik,
2016;
Abschlussprüfung: 2016.
-
S. Horngacher:
"Modellbildung und Regelung des Überdrucks in Reinraumanlagen";
Betreuer/in(nen): M. Kozek;
Institut für Mechanik und Mechatronik,
2012.
-
D. Horwatitsch:
"Aktive Schwingungsreduktion durch Regelung elastischer Fahrzeugstrukturen";
Betreuer/in(nen): H. Jörgl, M. Kozek;
E325 A5,
2004.
-
Ch. Huber:
"Humanoid Robots";
Betreuer/in(nen): P. Kopacek;
Institut für Handhabungsgeräte und Robotertechnik,
2002.
-
W. Huber:
"Base de Datos y Redes Semánticas: Aplicación al modelado del conocimiento de un robot guia";
Betreuer/in(nen): P. Kopacek;
Institut für Mechanik und Mechatronik - Abteilung 6 Intelligente Handhabungs- und Robotertechnik,
2006;
Abschlussprüfung: 2006.
-
G. Jeney:
"Simulation des dynamischen Verhaltens eines Schienenfahrzeugrades mit Flachstelle im geraden Gleis";
Betreuer/in(nen): P. Lugner;
E 325-1 Institut für Mechanik und Mechatronik,
2004.
-
A. John:
"Einfluss der Modelle passiver Hydrolager auf die Ergebnisse von Gesamtfahrzeugsimulationen";
Betreuer/in(nen): W. Mack;
Institut für Mechanik und Mechatronik,
2002.
-
K. Joutsen:
"Intelligent Software Agents";
Betreuer/in(nen): P. Kopacek;
Institut für Mechanik und Mechatronik - Abteilung 6 Intelligente Handhabungs- und Robotertechnik,
2006;
Abschlussprüfung: 2006.
-
W. Jütte:
"An E-Learning Framework for the "Competitive Eco-Efficient Strategies in Engineering Management Educational Program" (CES-EM)";
Betreuer/in(nen): P. Kopacek;
Institut für Handhabungsgeräte und Robotertechnik,
2002.
-
F. Kager:
"Kontaktlose Strukturanregung für die experimentelle Modalanalyse";
Betreuer/in(nen): J. Wassermann;
Inst. für Mechanik und Mechatronik,
2004;
Abschlussprüfung: 2004.
-
P. Kampas:
"Verarbeitung des EMG zu störungssicheren und amplitudenunabhängigen Steuersignalen für die Prothetik";
Betreuer/in(nen): H. Jörgl, F. Rattay;
E 325 A5,
1998.
-
J. Karner:
"Gehmechanismen für Roboter";
Betreuer/in(nen): P. Kopacek;
Institut für Handhabungsgeräte und Robotertechnik,
2003.
-
A. Kaser:
"Entwicklung und Validierung eines taktilen Feedbackgerätes für Armprothesen";
Betreuer/in(nen): J. Wassermann;
Mechanik und Mechatronik,
2015.
Zusätzliche Informationen
-
L. Kasper:
"Modeling of the Phase Change Material of a Hybrid Storage using the Finite Element Method";
Betreuer/in(nen): R. Hofmann, A. Schirrer, M. Koller;
Institut für Energietechnik und Thermodynamik - E302,
2019;
Abschlussprüfung: 06/2019.
-
H. Kerschner:
"Adaptive Regelung in der Anästhesie";
Betreuer/in(nen): H. Jörgl, M. Kozek;
E 325 A5,
2001.
-
F. Kitanoski:
"Motormodell zur Simulation von Wärmeströmen in Fahrzeugen";
Betreuer/in(nen): H. Jörgl, M. Kozek;
325 - 5,
2005.
-
F. Klinger:
"Theoretische Untersuchungen zum High-Speed-Wobble-Phänomen bei Rennrädern";
Betreuer/in(nen): M. Plöchl, J. Edelmann;
Institut für Mechanik und Mechatronik, E325/A1,
2013.
-
M. Klinger:
"Analyse der Fahrdynamik und Fahrsicherheit von E-Scootern";
Betreuer/in(nen): F. Klinger, M. Plöchl, J. Edelmann;
Institut für Mechanik und Mechatronik E325-01,
2021.
-
S. Klügl:
"Weiterentwicklung einer semi-automatischen Demontageanlage";
Betreuer/in(nen): P. Kopacek;
Institut für Handhabungsgeräte und Robotertechnik,
2003.
-
M. Kneissl:
"Continuous-time system identification of battery models for ageing data analysis and state of health estimation";
Betreuer/in(nen): C. Hametner;
Institut für Mechanik und Mechatronik,
2018;
Abschlussprüfung: 24.10.2018.
-
T. Kniffka:
"Studien zur Anti-Resonanz bei parametererregten Mehrfreiheitsgrad-Drehschwingern";
Betreuer/in(nen): H. Ecker;
Institut für Mechanik und Mechatronik,
2012;
Abschlussprüfung: 27.09.2012.
-
E. Kocbay:
"Mechanisches Modell zur Ermittlung der Steifigkeit des Wellenaufbaus eines Walzgerüstes";
Betreuer/in(nen): F. Bleicher, M. Lamprecht, M. Leonhartsberger, Y. Vetyukov, M. Krommer;
E311,
2019;
Abschlussprüfung: 27.09.2019.
-
L. Kölbl:
"Prognose der Heizlast in Fernwärme Netzwerken";
Betreuer/in(nen): W. Scherrer, S. Grosswindhager;
Institut für Wirtschaftsmathematik,
2012;
Abschlussprüfung: 06/2012.
Zusätzliche Informationen
-
J Kogler:
"Experimentelle dynamische Untersuchung an einem Vertikal-Rotor-Prüfstand";
Betreuer/in(nen): H. Ecker;
Mechanik und mechatronik,
2017;
Abschlussprüfung: 2017.
-
D. Kuzdas, D. Murschenhofer:
"A real-time capable quasi-2D PEMFC model";
Betreuer/in(nen): S. Braun, S. Jakubek;
Institut für Strömungsmechanik und Wärmeübertragung,
2017;
Abschlussprüfung: 12.07.2017.
Zusätzliche Informationen
-
J. Labek:
"Projektmanagement in Non Profit Organisationen";
Betreuer/in(nen): P. Kopacek;
Institut für Handhabungsgeräte und Robotertechnik,
2002.
-
H. Lackner:
"The development of a Flight Management System";
Betreuer/in(nen): H. Springer, H. Ecker;
Inst. für Maschinendynamik und Messtechnik,
2002.
-
G. Landskron:
"Ein Beitrag zur semiautomatischen Demontage";
Betreuer/in(nen): P. Kopacek;
Institut für Handhabungsgeräte und Robotertechnik,
2003.
-
A. Lasa Goni:
"Robuste Regelung: Untersuchung der Stabilität von Polynomfamilien";
Betreuer/in(nen): H. Jörgl, M. Kozek;
E 325 A5,
1997.
-
I. Lazarov:
"Strömungsakustische Simulation einer tiefen Kavität mit Lippe";
Betreuer/in(nen): M. Kaltenbacher, S. Schoder;
Mechanik und Mechatronik,
2018.
Zusätzliche Informationen
-
M. Lenzmann:
"Objektive Analysemethoden zur Reifenselektion";
Betreuer/in(nen): H. Ecker, H. Springer;
Inst. für Maschinendynamik und Messtechnik,
2004.
-
R. Lernbeiss:
"Simulation eines Flugzeugfahrwerkes bei elastischer Betrachtung des Federbeines";
Betreuer/in(nen): M. Plöchl;
E 325-1 Institut für Mechanik und Mechatronik,
2004.
-
F. Lesch:
"Konzeption eines Steer-by-Wire Lenksystems für Fahrräder";
Betreuer/in(nen): F. Klinger, M. Plöchl, J. Edelmann;
Institut für Mechanik und Mechatronik E325-01,
2021.
-
B. Lichtenauer:
"Erstellung eines MKS-Modells zur Lenkungssimulation beim Nutzfahrzeug";
Betreuer/in(nen): M. Plöchl;
Institut für Mechanik und Mechatronik, A1- Fahrzeugdynamik und Biomechanik,
2010.
-
P. Lichtenwöhrer:
"End-of-Life Management von Handys";
Betreuer/in(nen): P. Kopacek;
Institut für Mechanik und Mechatronik- Abteilung 6 Intelligente Handhabungs und Robotertechnik,
2007;
Abschlussprüfung: 2007.
-
M. Lindner:
"Gegenüberstellung von Messungen und Simulationen mit Runflat-Reifen am Reifenprüfstand und am Gesamtfahrzeug mit FTire als Reifenmodell";
Betreuer/in(nen): M. Plöchl;
Institut für Mechanik und Mechatronik,
2008;
Abschlussprüfung: 07/2008.
-
S Litschauer:
"Experimentelle Untersuchung zum Fahrstreifenwechsel mit Motorrädern";
Betreuer/in(nen): H. Ecker;
Inst. für Mechanik und Mechatronik,
2021.
Zusätzliche Informationen
-
C. Lohninger:
"Efficient modelling and control design for suppression of pressure oscillations in an industrial condensation process";
Betreuer/in(nen): M. Kozek;
Institut für Mechanik und Mechatronik,
2018;
Abschlussprüfung: 20.06.2018.
Zusätzliche Informationen
-
A. Lorenz:
"Modellbildung und Regelung eines elektrischen Servoantriebes";
Betreuer/in(nen): H. Jörgl, M. Kozek;
E325 A5,
2004.
-
W. Loy:
"Elektronikschrottrecycling. Modellierung einer Lagerhaltungsdatenbank des Elektronikrecyclingunternehmens ECOTRONICS";
Betreuer/in(nen): P. Kopacek;
Institut für Handhabungsgeräte und Robotertechnik,
2003.
-
E. Luchini:
"Adaptives, makroskopisches Verkehrsmodell mit Parameteridentifikation";
Betreuer/in(nen): S. Jakubek;
Institut für Mechanik und Mechatronik,
2014;
Abschlussprüfung: 08.12.2014.
-
D. Lukac:
"Beitrag zur Teilautomatisierung von Demontagevorgängen";
Betreuer/in(nen): P. Kopacek;
Institut für Handhabungsgeräte und Robotertechnik,
2003.
-
K. Lutterotti:
"Entschraubungsmodul einer Demontageanlage für Mobiltelefone";
Betreuer/in(nen): P. Kopacek;
Institut für Handhabungsgeräte und Robotertechnik,
2003.
-
P. Mandl:
"Predictive driver model for speed control in the presence of road obstacles";
Betreuer/in(nen): F. Klinger, C. Hametner, J. Edelmann;
Institut für Mechanik und Mechatronik E325-01,
2021.
-
M. Markowitz:
"Fahrdynamische Untersuchung eines Formula Student Fahrzeuges mittels MKS-Modell";
Betreuer/in(nen): J. Edelmann, M. Plöchl;
Institut für Mechanik und Mechatronik, E325/A1,
2017.
-
P. Maurerlehner:
"Efficient FEM Model of Human Phonation";
Betreuer/in(nen): S. Schoder, M. Kaltenbacher;
Institut für Mechanik und Mechatronik,
2020;
Abschlussprüfung: 06.03.2020.
-
M. Mayerhofer:
"Manufacturability Analysis for Additive Manufacturing";
Betreuer/in(nen): T. Strasser;
Institut für Mechanik und Mechatronik,
2020;
Abschlussprüfung: 12.02.2020.
Zusätzliche Informationen
-
L. Mayr:
"Vergleich von EKF und UKF zur Fahrzustandsschätzung anhand des Zweiradmodells";
Betreuer/in(nen): J. Edelmann, M. Plöchl;
Institut für Mechanik und Mechatronik, E325/A1,
2014.
-
D. Mayrhofer:
"A new method of digital sound reconstruction";
Betreuer/in(nen): M. Kaltenbacher;
Mechanik und Menchatronik,
2019;
Abschlussprüfung: 19.09.2019.
Zusätzliche Informationen
-
I. Mayrhofer:
"Entwicklung eines standardisierten Berechnungsmodells zur einfachen Spannungsanalyse für Rohrleitungen im Anlagenbau zur Stahlerzeugung";
Betreuer/in(nen): M. Krommer;
Institut für Mechanik und Mechatronik,
2018;
Abschlussprüfung: 12.07.2018.
-
D. Meise:
"Ökologische Bewertung von Multifunktionsgeräten im Vergleich zu Einzelgeräten";
Betreuer/in(nen): P. Kopacek;
Institut für Handhabungsgeräte und Robotertechnik,
2002.
-
M. Metzler:
"Optimale Modell-Fesselung in der nabenkrafterregten Fahrzeugsimulation";
Betreuer/in(nen): W. Mack;
Institut für Mechanik und Mechatronik E325/A1,
2015.
-
M. Meusburger:
"MKS-Modell zur Analyse des Schlingerverhaltens des Gliederzugs Integral";
Betreuer/in(nen): J. Edelmann, M. Plöchl;
Institut für Mechanik und Mechatronik E325/A1,
2018;
Abschlussprüfung: 04.05.2018.
-
D. Miklau:
"Schätzung der Molekularen Masseverteilung in Typ-A Polymeren mittels Dielektrischem Verlustspektrum";
Betreuer/in(nen): H. Jörgl, M. Kozek;
E 325 A5,
2000.
-
D. Millán:
"Erhöhung der Rechnerleistung von "On-board Rechnern" mobiler Roboter";
Betreuer/in(nen): P. Kopacek;
Institut für Mechanik und Mechatronik / Abt.6 Intelligente Handhabungs- und Robotertechnik,
2005.
-
W. Milowanowa:
"Roboter zur Aus- und Weiterbildung";
Betreuer/in(nen): P. Kopacek;
Institut für Handhabungsgeräte und Robotertechnik,
2004.
-
M. Mitsch:
"Untersuchung zur Chargenstreuung passiver Hydrolager und zur Charakterisierung ihres Verhaltens durch die Standardkenngrößen cdyn und δ";
Betreuer/in(nen): W. Mack;
Institut für Mechanik und Mechatronik E325/A1,
2008.
-
F. Moser:
"Wankkompensation für ein Metrofahrzeug mit Vierpunktsteuerung mit Hilfe aktiver Luftfedern";
Betreuer/in(nen): J. Edelmann, M. Plöchl;
Institut für Mechanik und Mechatronik E325/A1,
2015.
-
F. Motedayen:
"Roboter in der Chirurgie";
Betreuer/in(nen): P. Kopacek;
Institut für Mechanik und Mechatronik - Abteilung 6 Intelligente Handhabungs- und Robotertechnik,
2006;
Abschlussprüfung: 2006.
-
C. Mühlegger:
"Auswertung von Energiemessungen im Fahrbetrieb einer U-Bahn";
Betreuer/in(nen): J. Wassermann;
Mechanik und Mechatronik,
2018.
Zusätzliche Informationen
-
A. Müller:
"Rückhollogistik für Geräte der Informationstechnik auf Basis von RFID-Technologie";
Betreuer/in(nen): P. Kopacek;
Institut für Handhabungsgeräte und Robotertechnik,
2004.
-
W. Müller:
"Modellbildung und querdynamische Untersuchung eines Fahrrades";
Betreuer/in(nen): M. Plöchl, J. Edelmann;
Institut für Mechanik und Mechatronik E325/A1,
2011.
-
A. Mußger:
"Konzept zum Aufbau eines Motorrades zur Untzersuchung fahrdynamischer Effekte";
Betreuer/in(nen): H. Ecker;
Institut für Mechanik und Mechatronik,
2012;
Abschlussprüfung: 04.10.2012.
-
J. Nowak:
"Schallquellenortung an rotierenden Systemen";
Betreuer/in(nen): M. Kaltenbacher;
Mechanik und Mechatronik,
2018;
Abschlussprüfung: 19.06.2018.
-
J. Nusime:
"Parametereinflüsse auf den Wobble-Mode bei Fahrrädern - Theorie und Praxis";
Betreuer/in(nen): M. Plöchl, J. Edelmann;
Institut für Mechanik und Mechatronik, E325/A1,
2012.
-
W. Oberndorfer:
"Simulation der Bewegung des Bandes eines Raumaufzuges";
Betreuer/in(nen): A. Steindl;
Institut für Mechanik und Mechatronik,
2008;
Abschlussprüfung: 25.06.2008.
-
M. Okoli:
"Optimal predictive energy management strategies for fuel cell electric trucks";
Betreuer/in(nen): C. Hametner;
Institut für Mechanik und Mechatronik,
2019.
-
M. Ortner:
"Einfluss des Dämpferdom-Gummilagers in der virtuellen Vertikaldynamikabstimmung von PKW";
Betreuer/in(nen): M. Plöchl, J. Edelmann;
Institut für Mechanik und Mechatronik E325/A1,
2016.
-
Chr. Ott:
"Untersuchung des Wobble-Modes bei Fahrrädern - Theorie und Fahrversuch";
Betreuer/in(nen): M. Plöchl, J. Edelmann;
Institut für Mechanik und Mechatronik, E325/A1,
2011.
-
N. Paces:
"Efficient Dynamic Modelling and Control of a Trickle Bed Reactor for Desulphurisation of Biogas";
Betreuer/in(nen): H. Jörgl, M. Kozek, M. Harasek;
Institut für Mechanik und Mechatronik,
2009;
Abschlussprüfung: 11.03.2009.
-
C. Pamer:
"Simulation und Validierung der Thermodynamik der Eisreibung von Gummi";
Betreuer/in(nen): R. Mundl, O. Lahayne;
Institut für Mechanik und Mechatronik,
2010;
Abschlussprüfung: 04/2010.
-
W. Paradeiser:
"Experimenteller Nachweis einer Parameter-Antiresonanz";
Betreuer/in(nen): H. Ecker, F. Dohnal;
Institut für Mechanik und Mechatronik,
2006;
Abschlussprüfung: 29.05.2006.
Zusätzliche Informationen
-
V. Pekmez:
"Humanoide Roboter";
Betreuer/in(nen): P. Kopacek;
Institut für Handhabungsgeräte und Robotertechnik,
2002.
-
D. Perchtold:
"Permanent Magnets in Chokes";
Betreuer/in(nen): M. Kaltenbacher;
Mechanik und Mechatronik,
2013.
-
S Perebner:
"Modellbasierte Methode zur Schätzung des Lenkwinkels bei Motorrädern";
Betreuer/in(nen): H. Ecker, F Harnischmacher;
Institut für Mechanik und Mechatronik,
2020;
Abschlussprüfung: 19.11.2020.
Zusätzliche Informationen
-
D. Pernsteiner:
"Thermische Charakterisierung eines kontinuierlichen TSA-Prozesses: Numerische Untersuchung einer blasenbildenden Wirbelschicht mit externer Zirkulation unter Verwendung der Euler-Euler Methode";
Betreuer/in(nen): R. Hofmann, H. Vogtenhuber, M. Harasek;
E302-3 - Institut für Energietechnik und Thermodynamik,
2018;
Abschlussprüfung: 21.06.2018.
-
B. Petermeier:
"Parametererregte Schwingungen eines Kragbalkens";
Betreuer/in(nen): H. Ecker;
Institut für Mechanik und Mechatronik,
2006;
Abschlussprüfung: 20.02.2006.
Zusätzliche Informationen
-
Ch. Pittner:
"Auswertung von Radkraft-Messdaten zur Ermittlung eines Lastkollektives für die Lebensdauerabschätzung von Schienen";
Betreuer/in(nen): K.-O. Endlicher, J. Edelmann;
Institut für Mechanik und Mechatronik E325/A1,
2017.
-
J. Pötscher:
"Berechnung und Validierung eines Modells einer Haftkraftwaage mittels Finite Elemente Methode";
Betreuer/in(nen): M. Kaltenbacher;
Mechanik und Mechatronik,
2016.
-
M. Polt:
"Fahrdynamik eines innovativen Straßenbahn-konzepts im Vergleich zu einem Referenzfahrzeug";
Betreuer/in(nen): J. Edelmann, M. Plöchl, G. Schandl;
Institut für Mechanik und Mechatronik E325/A1,
2018.
-
S. Popprath:
"Numerische Untersuchungen von selbsterregten Rotor-Stator-Systemen mit Begrenzung durch ein starres oder elastisches Fanglager";
Betreuer/in(nen): H. Springer, H. Ecker;
Inst. für Maschinendynamik und Messtechnik,
2004;
Abschlussprüfung: 17.05.2004.
Zusätzliche Informationen
-
B. Potakowskyj:
"Sekundäraufpralluntersuchungen mit einem Dummymodell im Metroführerstand";
Betreuer/in(nen): H. Schmiedmayer;
Institut für Mechanik und Mechatronik E325/A1,
2015.
-
S. Poxhofer:
"Simulation von Antriebsstrangkollektiven unter Straßenbetriebsbedingungen";
Betreuer/in(nen): M. Plöchl;
Institut für Mechanik und Mechatronik E325/A1,
2007;
Abschlussprüfung: 21.12.2007.
-
R. Priesner:
"Predictive test bed control";
Betreuer/in(nen): S. Jakubek;
Institut für Mechanik und Mechatronik,
2011;
Abschlussprüfung: 2011.
-
S. Pürcher:
"Demontagelogistik für Elektro- und Elektronikaltgeräte auf Basis von RFID-Technologie";
Betreuer/in(nen): P. Kopacek;
Institut für Mechanik und Mechatronik / Abt.6 Intelligente Handhabungs- und Robotertechnik,
2004.
-
B. Putz:
"Antriebsregelung eines mobilen Kleinroboters";
Betreuer/in(nen): P. Kopacek;
Institut für Handhabungsgeräte und Robotertechnik,
2002.
-
C. Radulescu:
"Vergleich von Fahrdynamikeigenschaften anhand zweier MKS-Software Modelle";
Betreuer/in(nen): J. Edelmann, M. Plöchl;
Institut für Mechanik und Mechatronik E325/A1,
2016;
Abschlussprüfung: 26.05.2016.
-
M. Rainer:
"Triebwerksschwingungen von Einzylinderverbrennungsmotoren - Prüfstandsberechnungen und Abgleich mit Messungen";
Betreuer/in(nen): H. Ecker, H. Springer;
Institut für Mechanik und Mechatronik,
2008;
Abschlussprüfung: 17.11.2008.
-
A. Razgordanisharahi:
"Hybrid Model for Static Deformations of Sandwich Beams and its Numerical Validation";
Betreuer/in(nen): Y. Vetyukov;
Institut für Mechanik und Mechatronik,
2021;
Abschlussprüfung: 06/2021.
Zusätzliche Informationen
-
A. Reisinger:
"Fahrzeugdynamische Analyse und Regelung eines 3-rädrigen Strassenfahrzeugs mit Neigetechnik";
Betreuer/in(nen): M. Plöchl;
Institut für Mechanik und Mechatronik E325/A1,
2006;
Abschlussprüfung: 20.12.2006.
-
J. Riedl:
"Clusteranalyse und Entwicklung eines Prozessdetektionsmodells für Zugmaschinen mittels maschinellen Lernens";
Betreuer/in(nen): C. Hametner;
Institut für Mechanik und Mechatronik,
2020.
Zusätzliche Informationen
-
S. Rögner:
"Kovarianzanalyse bei Neuro-Fuzzy Netzwerken zur Fehleridentifikation";
Betreuer/in(nen): H. Jörgl, S. Jakubek;
325 - 5,
2005.
-
K. Roppert:
"Standard and auxiliary-based algebraic multigrid methods for elliptic PDEs";
Betreuer/in(nen): M. Kaltenbacher, S. Schoder;
Mechanik und Mechatronik,
2017.
-
G. Rothensteiner:
"Regelung eines tribologischen Prüfstandes";
Betreuer/in(nen): J. Wassermann, M. Kozek;
Institut für Mechanik und Mechatronik,
2013.
-
K. Rozana:
"Vergleich von Gummilagermodellen in der MKS";
Betreuer/in(nen): W. Mack;
Institut für Mechanik und Mechatronik, E325-01,
2019.
-
S. Rumpold:
"Validierung und Weiterentwicklung vereinfachter Simulationsmodelle für Achskennwerte in der Fahrdynamik";
Betreuer/in(nen): J. Edelmann;
Institut für Mechanik und Mechatronik, E325-01,
2019.
-
I. Sabater:
"Strategies for Robot Swarms";
Betreuer/in(nen): P. Kopacek;
Institut für Handhabungsgeräte und Robotertechnik,
2004.
-
F. Schebesta:
"Attitude control algorithm for Quadcopter";
Betreuer/in(nen): M. Kozek;
Institut für Mechanik und Mechatronik,
2018;
Abschlussprüfung: 23.05.2018.
Zusätzliche Informationen
-
J. Scheidl:
"Biegedrillknicken eines kreisförmig gekrümmten Balkens mit dünnem, teilkreisförmigem Querschnitt";
Betreuer/in(nen): Y. Vetyukov;
Institut für Mechanik und Mechatronik,
2018;
Abschlussprüfung: 30.01.2018.
-
E. Schierer:
"Implementierung eines Steuerrechners für einen teilautonomen Mini-Roboter";
Betreuer/in(nen): P. Kopacek;
Institut für Mechanik und Mechatronik / Abt. 6 Intelligente Handhabungs- und Robotertechnik,
2004.
-
A. Schirrer:
"Co-Simulation of Rail Car Body Vibration Control with SimPACK";
Betreuer/in(nen): P. Lugner, H. Jörgl;
E325 A5,
2007;
Abschlussprüfung: 2007.
Zusätzliche Informationen
-
M. Schmidinger:
"Rechnergestützte Technologievorhersage";
Betreuer/in(nen): P. Kopacek;
Institut für Handhabungsgeräte und Robotertechnik,
2003.
-
C. Schmidrathner:
"Kavitationsmodelle für Stoß-Struktur-Wechselwirkung";
Betreuer/in(nen): H. Steinrück;
Strömungsmechanik und Wärmeübertragung,
2016;
Abschlussprüfung: 27.04.2016.
-
P. Schmitt:
"IFAC und Automatisierungstechnik in Österreich";
Betreuer/in(nen): P. Kopacek;
Institut für Mechanik und Mechatronik / Abt.6 Intelligente Handhabungs- und Robotertechnik,
2004.
-
J. Schöftner:
"Aktive Schwingungsdämpfung eines Schienenfahrzeugwagenkastens durch H_{2}-Regelung";
Betreuer/in(nen): H. Jörgl, M. Kozek;
Institut für Mechanik und Mechatronik,
2006.
-
T. Schragl:
"Modeling and Control of a Humidifier for PEM and SO Fuel Cells";
Betreuer/in(nen): M. Kozek;
Institut für Mechanik und Mechatronik,
2013.
-
C. Schütz:
"Fehler-Diagnosekonzept für einen stark rußenden Dieselmotor";
Betreuer/in(nen): H. Jörgl, S. Jakubek;
Institut für Mechanik und Mechatronik,
2005.
-
K Schulmeister:
"Modellierung eines Teststandes für Laserunterstütztes Drahtziehen";
Betreuer/in(nen): M. Kozek, G. Liedl;
E325/E345,
2006;
Abschlussprüfung: 22.11.2006.
-
A. Schulz:
"Schaltverstärker für Magnetlager mit direkter Prozessoransteuerung";
Betreuer/in(nen): H. Springer, J. Wassermann;
Inst. für Maschinendynamik und Messtechnik,
2001;
Abschlussprüfung: 2002.
Zusätzliche Informationen
-
A. Schuster:
"Simulation und Regelung von Wärmetauschernetzwerken";
Betreuer/in(nen): H. Jörgl, A. Voigt;
E325 A5,
2007;
Abschlussprüfung: 14.03.2007.
Zusätzliche Informationen
-
K. Schustereder:
"Modellbildung und Entwurf einer Leistungsregelung Für eine Kristallisationsanlage in der Zellulosefaser-Herstellung der Lenzing AG";
Betreuer/in(nen): M. Kozek;
Institut für Mechanik und Mechatronik,
2012;
Abschlussprüfung: 25.06.2012.
Zusätzliche Informationen
-
M. Schwarzbart:
"On Stability Problems of the Space Elevator";
Betreuer/in(nen): A. Steindl, W. Mack;
Institut für Mechanik und Mechatronik,
2007;
Abschlussprüfung: 21.05.2007.
Zusätzliche Informationen
-
B. Schweiger:
"RFID im Konsumgüterbereich-vom Barcode zum EPC";
Betreuer/in(nen): P. Kopacek;
Institut für Mechanik und Mechatronik / Abt.6 Intelligente Handhabungs- und Robotertechnik,
2005.
-
L Schwinghammer:
"Condition Monitoring of Low-Consistency Refiner for plate protection";
Betreuer/in(nen): H. Ecker;
Institut für Mechanik und Mechatronik,
2018;
Abschlussprüfung: 13.12.2018.
-
P. Seebacher:
"Neues Auslegungsverfahren zur FE gestützten Optimierung von Magnetkörpern für die Magnetschienebremse";
Betreuer/in(nen): M. Kaltenbacher;
Mechanik und Mechatronik,
2017.
-
D. Seifert:
"Funktionale Programmierung einer Mikroprozessor gesteuerten Beinprothese für geriatrische Patienten";
Betreuer/in(nen): H. Schmiedmayer;
Institut für Mechanik und Mechatronik E325/A1,
2011.
-
M. Seifried:
"Implementierung der hauptnormalspannungen und -verzerrungen in das Finite Elemente Programm CFS++";
Betreuer/in(nen): M. Kaltenbacher;
Mechanik und Mechatronik,
2017.
-
L. Silberbauer:
"Robots for Landmine Detection";
Betreuer/in(nen): P. Kopacek;
Institut für Mechanik und Mechatronik - Abteilung 6 Intelligente Handhabungs- und Robotertechnik,
2006;
Abschlussprüfung: 2006.
-
H. Sima:
"Entwicklung eines hochgenauen und kostengünstigen Abstandssensors";
Betreuer/in(nen): J. Wassermann, A. Schulz;
Institut für Mechanik und Mechatronik,
2009;
Abschlussprüfung: 17.09.2009.
-
H. Sivich:
"Vergleich verschiedener Unwuchtkompensationsalgorithmen";
Betreuer/in(nen): H. Springer, M. Hirschmanner;
Inst. für Maschinendynamik und Messtechnik,
2002.
-
S. Smolek:
"Objektorientierte Modellierung und dynamische Co-SImulation mit CATIA V6 am Beispiel von Kraftfahrzeugsystemen";
Betreuer/in(nen): H. Ecker, F. Breitenecker;
Institut für Mechanik und Mechatronik,
2013;
Abschlussprüfung: 05.12.2013.
-
A.R. Sol:
"Walking Humanoid Robot - Concepts of Control";
Betreuer/in(nen): P. Kopacek, B. Putz;
Institut für Mechanik und Mechatronik,
2006;
Abschlussprüfung: 12.10.2006.
-
G. Spacek:
"Konstruktion eines Magnetlagers mit im Betrieb austauschbaren Elektromagneten";
Betreuer/in(nen): J. Wassermann, A. Schulz, S. Popprath;
Institut für Mechanik und Mechatronik,
2007;
Abschlussprüfung: 04/2007.
Zusätzliche Informationen
-
C. Sprirdon:
"Robot Soccer - Strategy Guidelines and Path Planning for Mini Mobile Robots";
Betreuer/in(nen): P. Kopacek, C. Hutanu;
Institut für Handhabungsgeräte und Robotertechnik,
2002.
-
O. Srb:
"Synthese von künstlichen Fahrzyklen zur realitätsnahen Prüfung von Kraftfahrzeugen";
Betreuer/in(nen): S. Jakubek;
Institut für MEchanik und Mechatronik,
2010;
Abschlussprüfung: 22.04.2010.
Zusätzliche Informationen
-
O. Srb:
"Synthese von künstlichen Fahrzyklen zur realitätsnahen Prüfung von Kraftfahrzeugen";
Betreuer/in(nen): S. Jakubek;
Institut für MEchanik und Mechatronik,
2010;
Abschlussprüfung: 22.04.2010.
Zusätzliche Informationen
-
M. Stark:
"Dynamic predistortion of an electrostatic MEMS-loudspeaker";
Betreuer/in(nen): S. Jakubek, N. Euler-Rolle;
Institut für Mechanik und Mechatronik,
2014;
Abschlussprüfung: 30.09.2014.
Zusätzliche Informationen
-
I. Steinbrecher:
"Modelling disc-brake squeal in a multi-body-dynamics environment";
Betreuer/in(nen): J. Edelmann, M. Plöchl;
Institut für Mechanik und Mechatronik E325/A1,
2015.
-
W. Steindl:
"Piezoelektrische MEMS Sensoren zur Dichte- und Viskositätsbestimmung";
Betreuer/in(nen): M. Kaltenbacher;
Mechanik und Mechatronik,
2015.
Zusätzliche Informationen
-
M. Steinhauser:
"Standardisierte Körperschall-Abnahmemessungen und Berechnungen f ür rotierende Maschinen";
Betreuer/in(nen): M. Kaltenbacher;
Mechanik und Mechatronik,
2018.
-
V. Steininger:
"Deep Learning Methods for Battery Ageing Prediction";
Betreuer/in(nen): C. Hametner;
Institut für Mechanik und Mechatronik,
2020.
Zusätzliche Informationen
-
B. Steinkogler:
"Erstellung eines dynamischen Riementriebmodells und dessen Einbindung in die MKS-Software ADAMS";
Betreuer/in(nen): H. Springer, H. Ecker;
Inst. für Maschinendynamik und Messtechnik,
2003.
-
D. Strasser:
"Messdatenanalyse und Effizienzuntersuchung von batterieelektrisch angetriebenen LKW-Prototypen";
Betreuer/in(nen): C. Hametner;
Institut für Mechanik und Mechatronik,
2019;
Abschlussprüfung: 12.12.2019.
-
W. Strehn:
"Implementierung eines Menschmodells zur Schwingungsanalyse in ADAMS/Car";
Betreuer/in(nen): H. Schmiedmayer;
E 325-1 Institut für Mechanik und Mechatronik,
2004.
-
S. Taing:
"Implementierung eines Frameworks für die echtzeitfähige Steuerungseinheit eines humanoiden Roboters";
Betreuer/in(nen): P. Kopacek;
Institut für Mechanik und Mechatronik - Abteilung 6 Intelligente Handhabungs- und Robotertechnik,
2006;
Abschlussprüfung: 2006.
-
L. Tchobansky:
"Modellbildung, Regelkonzept und Simulation einer Einrichtung zur Bremsenergiespeicherung bei KFZ";
Betreuer/in(nen): H. Jörgl, M. Kozek, G. Schlager;
Inst. f. Maschinen- und Prozess-Automatisierung 328,
2003.
Zusätzliche Informationen
-
T. Ternai:
"Soziale und gesellschaftliche Auswirkungen der Automatisierungstechnik am Beispiel Österreichs";
Betreuer/in(nen): P. Kopacek;
Institut für Mechanik und Mechatronik / Abt.6 Intelligente Handhabungs- und Robotertechnik,
2005.
-
Ch. Teufel:
"Erarbeitung eines Logistikkonzeptes für die Sammlung und Verwertung von Elektro(nik)-altgeräten";
Betreuer/in(nen): P. Kopacek;
Institut für Handhabungsgeräte und Robotertechnik,
2002.
-
P. Thonet-Drechsel:
"Aktive und semiaktive Regelungskonzepte zur Entkopplung von Hub- und Nickbewegungen eines Kraftfahrzeugs";
Betreuer/in(nen): M. Plöchl, J. Edelmann;
Institut für Mechanik und Mechatronik E325/A1,
2014.
-
E. Thonhofer:
"Interpolation of System Dynamics";
Betreuer/in(nen): S. Jakubek, C. Mayr;
Institut für Mechanik und Mechatronik,
2011;
Abschlussprüfung: 08.08.2011.
Zusätzliche Informationen
-
M. Tiefenbacher:
"Identifikation der Radkräfte eines Eisenbahnwagons bei asynchron gesampelten Messdaten";
Betreuer/in(nen): H. Jörgl, M. Kozek;
E325 A5,
2007;
Abschlussprüfung: 18.12.2007.
Zusätzliche Informationen
-
D. Tippelt:
"Dynamische Simulation einer Magnetschienenbremse in Hochlage";
Betreuer/in(nen): M. Plöchl, J. Edelmann;
Institut für Mechanik und Mechatronik E325/A1,
2011.
-
G. Tonweber:
"Evaluierung Humanoider Roboterkits";
Betreuer/in(nen): P. Kopacek;
Institut für Mechanik und Mechatronik / Abt.6 Intelligente Handhabungs- und Robotertechnik,
2005.
-
S. Tschallener:
"Aufbau und Charakterisierung eines Messsystems nach der Tamura-Methode zur Ermittlung akustischer Materialeigenschaften unter beliebigen Schalleinfallswinkeln";
Betreuer/in(nen): M. Kaltenbacher;
Mechanik und Mechatronik,
2017.
Zusätzliche Informationen
-
C. Tubeuf:
"Optimal Experimental Design for the Analysis of a Novel Hybrid Steam Storage";
Betreuer/in(nen): R. Hofmann, L. Kasper, A. Schirrer;
E302 - Institut für Energietechnik und Thermodynamik,
2021;
Abschlussprüfung: 16.03.2021.
-
A. Uhl:
"Vergleich der Simulationsrechnung gemäß EN 14363 und der Auswertung ortsfester Messstellen zur Quantifizierung von Schienenoberflächenschäden, die bei Überfahrten von Schnellzügen verursacht werden";
Betreuer/in(nen): K.-O. Endlicher, J. Edelmann;
Institut für Mechanik und Mechatronik E325/A1,
2018.
-
M. Unterberger:
"Verhalten eines allradgetriebenen Fahrzeugs im Grenzbereich und der Einfluss des Fahrdynamikreglers";
Betreuer/in(nen): M. Plöchl;
Institut für Mechanik und Mechatronik,
2009;
Abschlussprüfung: 09.03.2009.
-
Ph. Urch:
"Control of a Semi-Automated Disassembling Cell";
Betreuer/in(nen): P. Kopacek;
Institut für Handhabungsgeräte und Robotertechnik,
2002.
-
L. Vasko:
"Erstellung eines grundlegenden Trimmed-Body Modells zur Fahrkomfortberechnung in Mehrkörpersimulationen";
Betreuer/in(nen): W. Mack;
Institut für Mechanik und Mechatronik, E325-01,
2020.
-
J. Vilsecker:
"Abdrifteffekte in der nabenkrafterregten Fahrzeugsimulation";
Betreuer/in(nen): W. Mack;
Institut für Mechanik und Mechatronik, Abteilung Fahrzeugdynamik und Biomechanik,
2009.
-
C. Violand:
"Untersuchung parallelkinematischer Strukturen bezüglich Seilkraftverteilung und Arbeitsraum";
Betreuer/in(nen): J. Edelmann, M. Plöchl;
Institut für Mechanik und Mechatronik E325/A1,
2018.
-
A. Voigt:
"Mehrgrößenregelung der 1,2-Dichlorethanproduktion der Fa. Vinnolit in der Oxichlorierung im Wirbelschichtverfahren";
Betreuer/in(nen): H. Jörgl, M. Kozek, F. Winter;
Inst. f. Maschinen- und Prozess-Automatisierung,
2003.
-
B. Voraberger:
"Dynamische Analyse eines Konverter-Kippantriebs";
Betreuer/in(nen): H. Schmiedmayer;
Institut für Mechanik und Mechatronik E325/A1,
2011.
-
L. Wallentin:
"Entwicklung eines Videosystems für das Furushiki2 Projekt";
Betreuer/in(nen): P. Kopacek;
Institut für Mechanik und Mechatronik- Abteilung 6 Intelligente Handhabungs und Robotertechnik,
2007;
Abschlussprüfung: 2007.
-
S Weissenböck:
"Simulation von spielbehafteten Drehschwingern";
Betreuer/in(nen): H. Ecker;
Institut für Mechanik und Mechatronik,
2018;
Abschlussprüfung: 11.10.2018.
-
M. Weitz:
"An Approach to Compute Cavity Noise Using Stochastic Noise Generation and Radiation";
Betreuer/in(nen): S. Schoder, M. Kaltenbacher;
Mechanik und Mechatronik,
2019;
Abschlussprüfung: 26.09.2019.
-
A Weninger:
"Privacy Preserving Authenticated Key Exchange - Modelling, Constructions, Proofs and Verification using Tamarin";
Betreuer/in(nen): M. Maffei, D. Slamanig;
Institut of Logic and Computation, Security and Privacy,
2021;
Abschlussprüfung: 27.08.2021.
Zusätzliche Informationen
-
A Weninger:
"Schwingungstechnische Untersuchung eines elektrischen Hochdrehzahl-Traktionsmotors für Triebfahrzeuge";
Betreuer/in(nen): H. Ecker, H. Neudorfer;
Institut für Mechanik und Mechatronik,
2018;
Abschlussprüfung: 13.12.2018.
Zusätzliche Informationen
-
W. Wiespointner:
"Gelenkssysteme Humanoider Roboter";
Betreuer/in(nen): P. Kopacek;
Institut für Mechanik und Mechatronik - Abteilung 6 Intelligente Handhabungs- und Robotertechnik,
2006;
Abschlussprüfung: 2006.
-
D. Wnorowski:
"Untersuchung von Lenkschwingungen eines geländegängigen Mehrzweckfahrzeuges";
Betreuer/in(nen): M. Plöchl, J. Edelmann;
Institut für Mechanik und Mechatronik, E325/A1,
2012.
-
M. Würzl:
"Strategie und Bildverarbeitung im Roboterfußball";
Betreuer/in(nen): P. Kopacek;
Institut für Handhabungsgeräte und Robotertechnik,
2003.
-
S. Wurm:
"Integrative Fahrdynamikregelung von Hinterachszusatzlenkung und aktiver Wankmomentenverteilung bei einem Porsche 911 Carrera S";
Betreuer/in(nen): M. Plöchl, J. Edelmann;
Institut für Mechanik und Mechatronik E325/A1,
2017.
-
Yenilmez:
"Kenngrößendarstellung von Struktur- und Parametervariationen: Untersuchungen mittels eines hybriden Gesamtfahrzeugmodells";
Betreuer/in(nen): W. Mack;
Institut für Mechanik und Mechatronik, A1 - Fahrzeugdynamik und Biomechanik,
2010.
-
D. Ying:
"Realisierung einer Regelung für mobile Kleinroboterfahrwerke";
Betreuer/in(nen): P. Kopacek;
Institut für Handhabungsgeräte und Robotertechnik,
2002.
-
Chr. Zach:
"Vergleichende Bewertung rheologischer Dämpfermodelle in der Vollfahrzeugsimulation";
Betreuer/in(nen): W. Mack;
Institut für Mechanik und Mechatronik,
2006.
-
R. Zahradnik:
"Marketingkonzept für Autonome, Mobile Roboter - am Beispiel Roboterfußball";
Betreuer/in(nen): P. Kopacek;
Institut für Mechanik und Mechatronik - Abteilung 6 Intelligente Handhabungs- und Robotertechnik,
2006;
Abschlussprüfung: 2006.
-
M. Zauner:
"Global Predictive control for smart homes using improved disturbance predictions";
Betreuer/in(nen): M. Kozek, M. Killian;
Institut für Mechanik und Mechatronik,
2018;
Abschlussprüfung: 06.03.2018.
-
F. Zehetbauer:
"Analysis and Optimization of an Opening Guide of a Wafer Baking System";
Betreuer/in(nen): J. Edelmann, M. Plöchl;
Institut für Mechanik und Mechatronik E325/A1,
2018.
-
C. Zenz:
"Antriebsstrang-Lastkollektivermittlung mit mechatronischen Antriebskomponenten";
Betreuer/in(nen): M. Plöchl;
Institut für Mechanik und Mechatronik E325/A1,
2009.
Wissenschaftliche Berichte
-
E. Arslan, M. Zigo, G. Kepplinger, W. Mack, A. Falkner:
"An algorithm of fatigue life estimation for random vibration based on direct power spectral density (PSD) definition in frquency domain";
Bericht für Magna Steyr;
2015.
-
E. Arslan, M. Zigo, W. Mack, G. Kepplinger:
"Further studies on cyclic plasticity in strength analysis of vehicle components";
Bericht für Magna-Steyr Graz;
Berichts-Nr. 2015/319,
2016;
54 S.
-
C. Benatzky, M. Kozek:
"1. Zwischenbericht für das Projekt ,,Aktive Schwingungsdämpfung durch Regelung elastischer Fahrzeugstrukturen"; FFG-Projekt: 809091 - KA/HN";
Bericht für Österreichische Forschungsförderungsgesellschaft (FFG);
Berichts-Nr. 1,
2005;
16 S.
-
C. Benatzky, M. Kozek:
"2. Zwischenbericht für das Projekt ,,Aktive Schwingungsdämpfung durch Regelung elastischer Fahrzeugstrukturen", FFG-Projekt 809091 - KA/HN";
Bericht für Österreichische Forschungsförderungsgesellschaft (FFG);
Berichts-Nr. 2,
2006;
21 S.
-
C. Benatzky, M. Kozek:
"Endbericht für das Projekt ,,Aktive Schwingungsdämpfung durch Regelung elastischer Fahrzeugstrukturen", FFG-Projekt: 809091 - KA/HN";
Bericht für Österreichische Forschungsförderungsgesellschaft (FFG);
Berichts-Nr. 3,
2006;
23 S.
-
K. Decker, K Schulmeister:
"Statische Analyse des Verschub- und Auflagerahmens der Anlage WS04";
Bericht für Integral-Montage Anlagen- und Rohrtechnik GmbH;
2010;
28 S.
-
P. Dolovai:
"FFG - Optimierung des Betriebsverhaltens von Gasmotoren - Monatsbericht April 2006";
Bericht für GE Jenbacher;
2006;
3 S.
-
P. Dolovai:
"FFG - Optimierung des Betriebsverhaltens von Gasmotoren - Monatsbericht April 2007";
Bericht für GE Jenbacher;
2007;
3 S.
-
P. Dolovai:
"FFG - Optimierung des Betriebsverhaltens von Gasmotoren - Monatsbericht August 2006";
Bericht für Ge Jenbacher;
2006;
2 S.
-
P. Dolovai:
"FFG - Optimierung des Betriebsverhaltens von Gasmotoren - Monatsbericht August 2007";
Bericht für GE Jenbacher;
2007;
3 S.
-
P. Dolovai:
"FFG - Optimierung des Betriebsverhaltens von Gasmotoren - Monatsbericht Februar 2006";
Bericht für GE Jenbacher;
2006;
3 S.
-
P. Dolovai:
"FFG - Optimierung des Betriebsverhaltens von Gasmotoren - Monatsbericht Februar 2007";
Bericht für GE Jenbacher;
2007;
3 S.
-
P. Dolovai:
"FFG - Optimierung des Betriebsverhaltens von Gasmotoren - Monatsbericht Jänner 2006";
Bericht für GE Jenbacher;
2006;
3 S.
-
P. Dolovai:
"FFG - Optimierung des Betriebsverhaltens von Gasmotoren - Monatsbericht Jänner 2007";
Bericht für GE Jenbacher;
2007;
3 S.
-
P. Dolovai:
"FFG - Optimierung des Betriebsverhaltens von Gasmotoren - Monatsbericht Juli 2007";
Bericht für GE Jenbacher;
2007;
3 S.
-
P. Dolovai:
"FFG - Optimierung des Betriebsverhaltens von Gasmotoren - Monatsbericht Juni 2006";
Bericht für Ge Jenbacher;
2006;
2 S.
-
P. Dolovai:
"FFG - Optimierung des Betriebsverhaltens von Gasmotoren - Monatsbericht Juni 2007";
Bericht für GE Jenbacher;
2007;
3 S.
-
P. Dolovai:
"FFG - Optimierung des Betriebsverhaltens von Gasmotoren - Monatsbericht März 2006";
Bericht für GE Jenbacher;
2006;
2 S.
-
P. Dolovai:
"FFG - Optimierung des Betriebsverhaltens von Gasmotoren - Monatsbericht März 2007";
Bericht für GE Jenbacher;
2007;
3 S.
-
P. Dolovai:
"FFG - Optimierung des Betriebsverhaltens von Gasmotoren - Monatsbericht Mai 2006";
Bericht für Ge Jenbacher;
2006;
2 S.
-
P. Dolovai:
"FFG - Optimierung des Betriebsverhaltens von Gasmotoren - Monatsbericht November 2007";
Bericht für GE Jenbacher;
2007;
3 S.
-
P. Dolovai:
"FFG - Optimierung des Betriebsverhaltens von Gasmotoren - Monatsbericht Oktober 2006";
Bericht für Ge Jenbacher;
2006;
2 S.
-
P. Dolovai:
"FFG - Optimierung des Betriebsverhaltens von Gasmotoren - Monatsbericht Oktober 2007";
Bericht für GE Jenbacher;
2007;
3 S.
-
P. Dolovai:
"FFG - Optimierung des Betriebsverhaltens von Gasmotoren - Versuchsbericht Dezember 2006";
Bericht für Ge Jenbacher;
2006;
6 S.
-
G. Feik, J. Wassermann:
"1. Zwischenbericht für das Projekt "FES - Entwicklung eines Trainingsfahrrades für Paraplegiker"; FFG-Projekt: 805343";
Bericht für die Österreichische Forschungsförderungsgesellschaft (FFG);
Berichts-Nr. 1,
2003;
7 S.
Zusätzliche Informationen
-
G. Feik, J. Wassermann, M. Schneeberger:
"2. Zwischenbericht für das Projekt "FES - Entwicklung eines Trainingsfahrrades für Paraplegiker"; FFG-Projekt: 805343";
Bericht für die Österreichische Forschungsförderungsgesellschaft (FFG);
Berichts-Nr. 2,
2004;
6 S.
Zusätzliche Informationen
-
G. Feik, J. Wassermann, M. Schneeberger:
"3. Zwischenbericht für das Projekt "FES - Entwicklung eines Trainingsfahrrades für Paraplegiker"; FFG-Projekt: 805343";
Bericht für die Österreichische Forschungsförderungsgesellschaft (FFG);
Berichts-Nr. 3,
2005;
11 S.
Zusätzliche Informationen
-
G. Feik, J. Wassermann, M. Schneeberger:
"Abschlussbericht für das Projekt "FES - Entwicklung eines Trainingsfahrrades für Paraplegiker"; FFG-Projekt: 805343";
Bericht für die Österreichische Forschungsförderungsgesellschaft (FFG);
Berichts-Nr. 4,
2005;
50 S.
Zusätzliche Informationen
-
T. Ferhatbegovic, W. Gawlik, R. Haas, M. Hartl, S. Hauer, M. Heimberger, S. Henein, A Hiesl, P. Jasek, R. Klug, B. Kodre, M. Kozek, F. Kupzog, M. Leitner, I. Leobner, K. Ponweiser, S. Schidler, A. Schirrer, J. Stockinger, H. Taus, M. Volcic, G. Zucker:
"SmartCityGrid: CoOpt Koordinierte Optimierung von erneuerbarer Energie in Netz und Gebäude bei Planung und Betrieb";
Bericht für FFG;
2015;
415 S.
-
C. Hametner, H. Jörgl:
"Dynamische Identifikation mit Neuro-Fuzzy Netzwerken";
Bericht für AVL List GmbH;
Berichts-Nr. Zwischenbericht,
2007;
61 S.
-
M. Han, P. Kopacek:
"CLAWAR / EURON / IARP Workshop on Robots in Entertainment, Leisure and Hobby, Vienna University of Technology, Austria, 02-04 December 2004";
2005;
2 S.
-
M. Hemedi, A. Schirrer, C. Westermayer, M. Kozek:
"ACFA 2020 - Deliverable D3.12: ACFA ASPO (Actuator and sensor positioning optimization)";
Bericht für EU FP7 project "ACFA 2020" consortium;
Berichts-Nr. 3.12 v1.4,
2009;
47 S.
-
K. Hoffmann, K. Decker, T. Gabmayer, K Schulmeister, M. Kozek:
"Laufverhalten und Regelung von Edelstahl-Prozessbändern";
Bericht für Österreichische Forschungsförderungsgesellschaft mbH, Sensengasse 1, 1090 Wien;
Berichts-Nr. 1,
2007;
11 S.
-
R. Hofmann, V. Halmschlager, S. Knöttner, B. Leitner, D. Pernsteiner, L. Prendl, C. Sejkora, G. Steindl, A. Traupmann:
"Digitalization in Industry - An Austrian Perspective, Whitepaper";
Bericht für Klima- und Energiefond;
2020;
122 S.
-
F. Hohensinn, W. Mack:
"Mechanische Untersuchung und festigkeitstechnische Auslegung des Öffnungsmechanismus eines neuartigen Raddepots";
Bericht für Raddepot S&E GmbH;
2013.
-
T. Kniffka, W. Mack:
"Berechnung der Kräfte im Hebemechanismus und Festigkeitsberechnungen von Verbindungselementen für einen Stuhl mit integrierter Aufstehhilfe";
Bericht für Camarg OG;
2013.
-
M. Kozek, L. Bitschnau:
"FFG Endbericht zum Projekt Optimierte Prozessführung von kontinuierlichen Banddurchlauföfen bei transienten Betriebsbedingungen";
Bericht für Österreichische Forschungsförderungsgesellschaft FFG;
2011;
20 S.
-
M. Kozek, L. Bitschnau:
"FFG Zwischenbericht zum Projekt Optimierte Prozessführung von kontinuierlichen Banddurchlauföfen bei transienten Betriebsbedingungen";
Bericht für FFG;
2009;
15 S.
Zusätzliche Informationen
-
M. Kozek, L. Haffner, E. Hokka:
"1. Zwischenbericht & Abrechnung zum Projekt "Steuergerätetaugliches Echtzeit-Reifenmodell (SER)"";
Bericht für FFG, FIT-IT Förderprogramm;
2006;
11 S.
-
M. Kozek, L. Haffner, E. Hokka:
"2. Zwischenbericht & Abrechnung zum Projekt "Steuergerätetaugliches Echtzeit-Reifenmodell (SER)"";
Bericht für FFG, Förderprogramm Fit-IT;
Berichts-Nr. 2,
2007;
10 S.
-
M. Kozek, L. Haffner, E. Hokka:
"3. Zwischenbericht & Abrechnung zum Projekt "Steuergerätetaugliches Echtzeit-Reifenmodell (SER)"";
Bericht für FFG, Förderprogramm Fit-IT;
Berichts-Nr. 3,
2007;
10 S.
-
M. Kozek, A. Schirrer:
"Aktive Schwingungsreduktion an Schienenfahrzeugstrukturen - Phase 2";
Bericht für Österreichische Forschungsförderungsgesellschaft;
Berichts-Nr. Endbericht,
2007;
47 S.
Zusätzliche Informationen
-
M. Kozek, A. Schirrer, M. Hemedi, C. Westermayer, M. Hromcik, T. Hanis:
"ACFA 2020 - Deliverable D3.6: Actuator and sensor positioning: Methods, investigation & concepts";
Bericht für EU FP7 project "ACFA 2020" consortium;
Berichts-Nr. 3.6 v1.2,
2008;
72 S.
Zusätzliche Informationen
-
M. Kozek, M. Tiefenbacher:
"Machbarkeitsstudie zur Detektion und Analyse sicherheitsrelevanter Parameter";
Bericht für Bundesministerium für Verkehr, Innovation und Technologie;
2009;
35 S.
Zusätzliche Informationen
-
M. Kozek, M. Tiefenbacher:
"Modellierung der Lateraldynamik eines Metrofahrzeugs mit Gleislagedaten";
Bericht für Siemens Transportation Systems;
2009;
13 S.
Zusätzliche Informationen
-
A. Lorenz, M. Kozek:
"1. Zwischenbericht 2006: Virtuelle Messdatenermittlung";
Bericht für Liebherr-Werk Bischofshofen GmbH;
2006;
3 S.
-
A. Lorenz, M. Kozek:
"Entwicklungswerkzeug für eine ziel- und zeitoptimierte Baumaschinenauslegung auf Basis virtuell ermittelter Daten";
Bericht für LIEBHERR-Werk Bischofshofen GmBH;
Berichts-Nr. Juli 07,
2007;
6 S.
-
A. Lorenz, M. Kozek:
"Entwicklungswerkzeug für eine ziel- und zeitoptimierte Baumaschinenauslegung auf Basis virtuell ermittelter Daten";
Bericht für LIEBHERR-Werk Bischofshofen GmBH;
Berichts-Nr. Dezember 07,
2007;
15 S.
-
A. Lorenz, M. Kozek:
"Jahresbericht 2006: Virtuelle Messdatenermittlung";
Bericht für Liebherr-Werk Bischofshofen GmbH;
2006;
8 S.
-
M. Mitsch, W. Mack:
"Erstellen eines Standardprüfprogramms zur Validierung von Hydrolagermodellen";
Bericht für MAGNA STEYR, Graz;
2008.
-
M. Mitsch, W. Mack:
"Untersuchung zur Chargenstreuung passiver Hydrolager, Elastomerlager und Stoßdämpfer";
Bericht für MAGNA STEYR;
2007.
-
B. Petermeier, H. Springer:
"Active Bearing Unit for Printing Machines - 1.Progress Report";
Bericht für SKF Österreich AG;
2006;
6 S.
-
B. Petermeier, H. Springer:
"Active Bearing Unit for Printing Machines - 10. Progress Report";
Bericht für SKF Österreich AG;
2008;
5 S.
-
B. Petermeier, H. Springer:
"Active Bearing Unit for Printing Machines - 2.Progress Report";
Bericht für SKF Österreich AG;
2006;
7 S.
-
B. Petermeier, H. Springer:
"Active Bearing Unit for Printing Machines - 3. Progress Report";
Bericht für SKF Österreich AG;
2007;
7 S.
-
B. Petermeier, H. Springer:
"Active Bearing Unit for Printing Machines - 4. Progress Report";
Bericht für SKF Österreich AG;
2007;
5 S.
-
B. Petermeier, H. Springer:
"Active Bearing Unit for Printing Machines - 5. Progress Report";
Bericht für SKF Österreich AG;
2007;
5 S.
-
B. Petermeier, H. Springer:
"Active Bearing Unit for Printing Machines - 6. Progress Report";
Bericht für SKF Österreich AG;
2007;
7 S.
-
B. Petermeier, H. Springer:
"Active Bearing Unit for Printing Machines - 7. Progress Report";
Bericht für SKF Österreich AG;
2008;
7 S.
-
B. Petermeier, H. Springer:
"Active Bearing Unit for Printing Machines - 9. Progress Report";
Bericht für SKF Österreich AG;
2008;
7 S.
-
B. Petermeier, H. Springer:
"Aktive Lagerungseinheit zur Dämpfung von Biegeschwingungen in Rotoren";
Bericht für SKF Science Report 2006 - 2007;
2008;
10 S.
Zusätzliche Informationen
-
S. Popprath, J. Wassermann, G. Schabl:
"1. Zwischenbericht für das Projekt "Versuchseinrichtung von Elastomerbauteilen für Schienenfahrzeuge"; FFG-Projekt: 806334";
Bericht für die Österreichische Forschungsförderungsgesellschaft (FFG);
Berichts-Nr. 1,
2004;
7 S.
Zusätzliche Informationen
-
S. Popprath, J. Wassermann, G. Schabl:
"2. Zwischenbericht für das Projekt "Versuchseinrichtung von Elastomerbauteilen für Schienenfahrzeuge"; FFG-Projekt: 806334";
Bericht für die Österreichische Forschungsförderungsgesellschaft (FFG);
Berichts-Nr. 2,
2004;
14 S.
Zusätzliche Informationen
-
S. Popprath, J. Wassermann, G. Schabl:
"3. Zwischenbericht für das Projekt "Versuchseinrichtung von Elastomerbauteilen für Schienenfahrzeuge"; FFG-Projekt: 806334";
Bericht für die Österreichische Forschungsförderungsgesellschaft (FFG);
Berichts-Nr. 3,
2005;
14 S.
Zusätzliche Informationen
-
S. Popprath, J. Wassermann, G. Schabl:
"Abschlussbericht für das Projekt "Versuchseinrichtung von Elastomerbauteilen für Schienenfahrzeuge"; FFG-Projekt: 806334";
Bericht für die Österreichische Forschungsförderungsgesellschaft (FFG);
Berichts-Nr. 4,
2006;
42 S.
Zusätzliche Informationen
-
S. Popprath, J. Wassermann, G. Schabl:
"Zusammenfassung Projektstand "Versuchseinrichtung zur Prüfung von schwingungs- und schalldämpfenden Fahrzeugbauteilen"; (FFG-Projekt: 806334)";
Bericht für das Bundesministerium für Innovation, Verkehr und Technologie;
Berichts-Nr. 1,
2004;
20 S.
-
G. Prochart, S. Jakubek, H. Berger:
"MEMBAT: Modellierung, Emulation und Management hochkomplexer Traktionsbatterien; 1. Zwischenbericht";
Bericht für FFG;
Berichts-Nr. 1,
2011;
8 S.
Zusätzliche Informationen
-
G. Prochart, S. Jakubek, H. Berger:
"MEMBAT: Modellierung, Emulation und Management hochkomplexer Traktionsbatterien; Endbericht";
Bericht für FFG;
Berichts-Nr. Enbericht,
2012;
54 S.
Zusätzliche Informationen
-
K Schulmeister, M. Kozek:
"Positionsregelung der Laserköpfe für S3";
Bericht für Berndorf Band GmbH, 2560 Berndorf;
2007;
3 S.
-
A. Schulz, J. Wassermann:
"1. Zwischenbericht für das Projekt "Aktives Magnetlager mit hoher Betriebssicherheit"; FWF-Projekt: P15824-N05";
Bericht für den Fonds zur Förderung der wissenschaftlichen Forschung (FWF);
Berichts-Nr. 1,
2002;
5 S.
Zusätzliche Informationen
-
A. Schulz, J. Wassermann:
"2. Zwischenbericht für das Projekt "Aktives Magnetlager mit hoher Betriebssicherheit"; FWF-Projekt: P15824-N05";
Bericht für den Fonds zur Förderung der wissenschaftlichen Forschung (FWF);
Berichts-Nr. 2,
2003;
5 S.
Zusätzliche Informationen
-
A. Schulz, J. Wassermann:
"3. Zwischenbericht für das Projekt "Aktives Magnetlager mit hoher Betriebssicherheit"; FWF-Projekt: P15824-N05";
Bericht für den Fonds zur Förderung der wissenschaftlichen Forschung (FWF);
Berichts-Nr. 3,
2004;
8 S.
Zusätzliche Informationen
-
A. Schulz, J. Wassermann, M. Neumann:
"1.Zwischenbericht für das Projekt "Konzept für ein ausfallsicheres aktives Magnetlager"";
Bericht für "Fond zur Förderung der wissenschaftlichen Forschung (FWF)";
2006;
1 S.
Zusätzliche Informationen
-
A. Schulz, J. Wassermann, M. Schneeberger:
"Abschlussbericht für das Projekt "Aktives Magnetlager mit hoher Betriebssicherheit"; FWF-Projekt: P15824-N05";
Bericht für den Fonds zur Förderung der wissenschaftlichen Forschung (FWF);
Berichts-Nr. 4,
2005;
11 S.
Zusätzliche Informationen
-
A. Schulz, J. Wassermann, M. Schneeberger:
"Endbericht zu "Fehlerdetektions- und Entkopplungsmodul zur Erhöhung der Betriebssicherheit von aktiven Magnetlagern"; Projekt:H-1424/2002";
Bericht für die Hochschuljubiläumsstiftung der Stadt Wien;
Berichts-Nr. 1,
2004;
9 S.
-
K Schwieger, P Saleh, A. Hula, M Hahn, A Genser, H. Ecker, M. Neumann:
"Evaluierung potentieller Gefahrenstellen für MotorradfahrerInnen basierend auf Fahrdynamikdaten - viaMotorrad";
Bericht für Österreichischer Verkehrssicherheitsfonds;
Berichts-Nr. 074,
2019;
120 S.
Zusätzliche Informationen
-
P. Seebacher, M. Kaltenbacher, F. Wein, H. Lehmann:
"A pseudo density topology optimization approach in nonlinear electromagnetism applied to a 3D actuator";
Bericht für JAE;
Berichts-Nr. 1,
2020;
15 S.
Zusätzliche Informationen
-
F. Zehetbauer:
"Antriebsstranglagersysteme bei Elektrofahrzeugen";
Bericht für Magna Steyr;
2019;
14 S.